aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds2022-06-02 12:11:25 -0700
committerLinus Torvalds2022-06-02 12:11:25 -0700
commitc399c85d60a4295bd911d366399a97df2865fb86 (patch)
tree8f45170d686f618210ac6f84fca5d5697f93bdb2 /drivers
parent17d8e3d90b6989419806c1926b894d7d7483a25b (diff)
parent833e53a4ffe92e742e99347c68d99dc33986598b (diff)
Merge tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas: - Revert brcmstb patches that broke booting on Raspberry Pi Compute Module 4 (Bjorn Helgaas) - Fix bridge_d3_blacklist[] error that overwrote the existing Gigabyte X299 entry instead of adding a new one (Bjorn Helgaas) - Update Lorenzo Pieralisi's email address in MAINTAINERS (Lorenzo Pieralisi) * tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Lorenzo Pieralisi's email address PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299 Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs" Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators" Revert "PCI: brcmstb: Add control of subdevice voltage regulators" Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend"
Diffstat (limited to 'drivers')
-rw-r--r--drivers/pci/controller/pcie-brcmstb.c257
-rw-r--r--drivers/pci/pci.c2
2 files changed, 32 insertions, 227 deletions
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 375c0c40bbf8..e61058e13818 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -24,7 +24,6 @@
#include <linux/pci.h>
#include <linux/pci-ecam.h>
#include <linux/printk.h>
-#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/sizes.h>
#include <linux/slab.h>
@@ -196,8 +195,6 @@ static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie,
static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val);
static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val);
static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val);
-static int brcm_pcie_linkup(struct brcm_pcie *pcie);
-static int brcm_pcie_add_bus(struct pci_bus *bus);
enum {
RGR1_SW_INIT_1,
@@ -286,14 +283,6 @@ static const struct pcie_cfg_data bcm2711_cfg = {
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
};
-struct subdev_regulators {
- unsigned int num_supplies;
- struct regulator_bulk_data supplies[];
-};
-
-static int pci_subdev_regulators_add_bus(struct pci_bus *bus);
-static void pci_subdev_regulators_remove_bus(struct pci_bus *bus);
-
struct brcm_msi {
struct device *dev;
void __iomem *base;
@@ -331,9 +320,6 @@ struct brcm_pcie {
u32 hw_rev;
void (*perst_set)(struct brcm_pcie *pcie, u32 val);
void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
- bool refusal_mode;
- struct subdev_regulators *sr;
- bool ep_wakeup_capable;
};
static inline bool is_bmips(const struct brcm_pcie *pcie)
@@ -450,99 +436,6 @@ static int brcm_pcie_set_ssc(struct brcm_pcie *pcie)
return ssc && pll ? 0 : -EIO;
}
-static void *alloc_subdev_regulators(struct device *dev)
-{
- static const char * const supplies[] = {
- "vpcie3v3",
- "vpcie3v3aux",
- "vpcie12v",
- };
- const size_t size = sizeof(struct subdev_regulators)
- + sizeof(struct regulator_bulk_data) * ARRAY_SIZE(supplies);
- struct subdev_regulators *sr;
- int i;
-
- sr = devm_kzalloc(dev, size, GFP_KERNEL);
- if (sr) {
- sr->num_supplies = ARRAY_SIZE(supplies);
- for (i = 0; i < ARRAY_SIZE(supplies); i++)
- sr->supplies[i].supply = supplies[i];
- }
-
- return sr;
-}
-
-static int pci_subdev_regulators_add_bus(struct pci_bus *bus)
-{
- struct device *dev = &bus->dev;
- struct subdev_regulators *sr;
- int ret;
-
- if (!dev->of_node || !bus->parent || !pci_is_root_bus(bus->parent))
- return 0;
-
- if (dev->driver_data)
- dev_err(dev, "dev.driver_data unexpectedly non-NULL\n");
-
- sr = alloc_subdev_regulators(dev);
- if (!sr)
- return -ENOMEM;
-
- dev->driver_data = sr;
- ret = regulator_bulk_get(dev, sr->num_supplies, sr->supplies);
- if (ret)
- return ret;
-
- ret = regulator_bulk_enable(sr->num_supplies, sr->supplies);
- if (ret) {
- dev_err(dev, "failed to enable regulators for downstream device\n");
- return ret;
- }
-
- return 0;
-}
-
-static int brcm_pcie_add_bus(struct pci_bus *bus)
-{
- struct device *dev = &bus->dev;
- struct brcm_pcie *pcie = (struct brcm_pcie *) bus->sysdata;
- int ret;
-
- if (!dev->of_node || !bus->parent || !pci_is_root_bus(bus->parent))
- return 0;
-
- ret = pci_subdev_regulators_add_bus(bus);
- if (ret)
- return ret;
-
- /* Grab the regulators for suspend/resume */
- pcie->sr = bus->dev.driver_data;
-
- /*
- * If we have failed linkup there is no point to return an error as
- * currently it will cause a WARNING() from pci_alloc_child_bus().
- * We return 0 and turn on the "refusal_mode" so that any further
- * accesses to the pci_dev just get 0xffffffff
- */
- if (brcm_pcie_linkup(pcie) != 0)
- pcie->refusal_mode = true;
-
- return 0;
-}
-
-static void pci_subdev_regulators_remove_bus(struct pci_bus *bus)
-{
- struct device *dev = &bus->dev;
- struct subdev_regulators *sr = dev->driver_data;
-
- if (!sr || !bus->parent || !pci_is_root_bus(bus->parent))
- return;
-
- if (regulator_bulk_disable(sr->num_supplies, sr->supplies))
- dev_err(dev, "failed to disable regulators for downstream device\n");
- dev->driver_data = NULL;
-}
-
/* Limits operation to a specific generation (1, 2, or 3) */
static void brcm_pcie_set_gen(struct brcm_pcie *pcie, int gen)
{
@@ -858,18 +751,6 @@ static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
/* Accesses to the RC go right to the RC registers if slot==0 */
if (pci_is_root_bus(bus))
return PCI_SLOT(devfn) ? NULL : base + where;
- if (pcie->refusal_mode) {
- /*
- * At this point we do not have link. There will be a CPU
- * abort -- a quirk with this controller --if Linux tries
- * to read any config-space registers besides those
- * targeting the host bridge. To prevent this we hijack
- * the address to point to a safe access that will return
- * 0xffffffff.
- */
- writel(0xffffffff, base + PCIE_MISC_RC_BAR2_CONFIG_HI);
- return base + PCIE_MISC_RC_BAR2_CONFIG_HI + (where & 0x3);
- }
/* For devices, write to the config space index register */
idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0);
@@ -898,8 +779,6 @@ static struct pci_ops brcm_pcie_ops = {
.map_bus = brcm_pcie_map_conf,
.read = pci_generic_config_read,
.write = pci_generic_config_write,
- .add_bus = brcm_pcie_add_bus,
- .remove_bus = pci_subdev_regulators_remove_bus,
};
static struct pci_ops brcm_pcie_ops32 = {
@@ -1047,9 +926,16 @@ static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
static int brcm_pcie_setup(struct brcm_pcie *pcie)
{
+ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
u64 rc_bar2_offset, rc_bar2_size;
void __iomem *base = pcie->base;
- int ret, memc;
+ struct device *dev = pcie->dev;
+ struct resource_entry *entry;
+ bool ssc_good = false;
+ struct resource *res;
+ int num_out_wins = 0;
+ u16 nlw, cls, lnksta;
+ int i, ret, memc;
u32 tmp, burst, aspm_support;
/* Reset the bridge */
@@ -1139,40 +1025,6 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
if (pcie->gen)
brcm_pcie_set_gen(pcie, pcie->gen);
- /* Don't advertise L0s capability if 'aspm-no-l0s' */
- aspm_support = PCIE_LINK_STATE_L1;
- if (!of_property_read_bool(pcie->np, "aspm-no-l0s"))
- aspm_support |= PCIE_LINK_STATE_L0S;
- tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
- u32p_replace_bits(&tmp, aspm_support,
- PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
- writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
-
- /*
- * For config space accesses on the RC, show the right class for
- * a PCIe-PCIe bridge (the default setting is to be EP mode).
- */
- tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3);
- u32p_replace_bits(&tmp, 0x060400,
- PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK);
- writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3);
-
- return 0;
-}
-
-static int brcm_pcie_linkup(struct brcm_pcie *pcie)
-{
- struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
- struct device *dev = pcie->dev;
- void __iomem *base = pcie->base;
- struct resource_entry *entry;
- struct resource *res;
- int num_out_wins = 0;
- u16 nlw, cls, lnksta;
- bool ssc_good = false;
- u32 tmp;
- int ret, i;
-
/* Unassert the fundamental reset */
pcie->perst_set(pcie, 0);
@@ -1223,6 +1075,24 @@ static int brcm_pcie_linkup(struct brcm_pcie *pcie)
num_out_wins++;
}
+ /* Don't advertise L0s capability if 'aspm-no-l0s' */
+ aspm_support = PCIE_LINK_STATE_L1;
+ if (!of_property_read_bool(pcie->np, "aspm-no-l0s"))
+ aspm_support |= PCIE_LINK_STATE_L0S;
+ tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
+ u32p_replace_bits(&tmp, aspm_support,
+ PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
+ writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
+
+ /*
+ * For config space accesses on the RC, show the right class for
+ * a PCIe-PCIe bridge (the default setting is to be EP mode).
+ */
+ tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3);
+ u32p_replace_bits(&tmp, 0x060400,
+ PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK);
+ writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3);
+
if (pcie->ssc) {
ret = brcm_pcie_set_ssc(pcie);
if (ret == 0)
@@ -1351,21 +1221,9 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
pcie->bridge_sw_init_set(pcie, 1);
}
-static int pci_dev_may_wakeup(struct pci_dev *dev, void *data)
-{
- bool *ret = data;
-
- if (device_may_wakeup(&dev->dev)) {
- *ret = true;
- dev_info(&dev->dev, "disable cancelled for wake-up device\n");
- }
- return (int) *ret;
-}
-
static int brcm_pcie_suspend(struct device *dev)
{
struct brcm_pcie *pcie = dev_get_drvdata(dev);
- struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
int ret;
brcm_pcie_turn_off(pcie);
@@ -1383,25 +1241,6 @@ static int brcm_pcie_suspend(struct device *dev)
return ret;
}
- if (pcie->sr) {
- /*
- * Now turn off the regulators, but if at least one
- * downstream device is enabled as a wake-up source, do not
- * turn off regulators.
- */
- pcie->ep_wakeup_capable = false;
- pci_walk_bus(bridge->bus, pci_dev_may_wakeup,
- &pcie->ep_wakeup_capable);
- if (!pcie->ep_wakeup_capable) {
- ret = regulator_bulk_disable(pcie->sr->num_supplies,
- pcie->sr->supplies);
- if (ret) {
- dev_err(dev, "Could not turn off regulators\n");
- reset_control_reset(pcie->rescal);
- return ret;
- }
- }
- }
clk_disable_unprepare(pcie->clk);
return 0;
@@ -1419,28 +1258,9 @@ static int brcm_pcie_resume(struct device *dev)
if (ret)
return ret;
- if (pcie->sr) {
- if (pcie->ep_wakeup_capable) {
- /*
- * We are resuming from a suspend. In the suspend we
- * did not disable the power supplies, so there is
- * no need to enable them (and falsely increase their
- * usage count).
- */
- pcie->ep_wakeup_capable = false;
- } else {
- ret = regulator_bulk_enable(pcie->sr->num_supplies,
- pcie->sr->supplies);
- if (ret) {
- dev_err(dev, "Could not turn on regulators\n");
- goto err_disable_clk;
- }
- }
- }
-
ret = reset_control_reset(pcie->rescal);
if (ret)
- goto err_regulator;
+ goto err_disable_clk;
ret = brcm_phy_start(pcie);
if (ret)
@@ -1461,10 +1281,6 @@ static int brcm_pcie_resume(struct device *dev)
if (ret)
goto err_reset;
- ret = brcm_pcie_linkup(pcie);
- if (ret)
- goto err_reset;
-
if (pcie->msi)
brcm_msi_set_regs(pcie->msi);
@@ -1472,9 +1288,6 @@ static int brcm_pcie_resume(struct device *dev)
err_reset:
reset_control_rearm(pcie->rescal);
-err_regulator:
- if (pcie->sr)
- regulator_bulk_disable(pcie->sr->num_supplies, pcie->sr->supplies);
err_disable_clk:
clk_disable_unprepare(pcie->clk);
return ret;
@@ -1606,17 +1419,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pcie);
- ret = pci_host_probe(bridge);
- if (!ret && !brcm_pcie_link_up(pcie))
- ret = -ENODEV;
-
- if (ret) {
- brcm_pcie_remove(pdev);
- return ret;
- }
-
- return 0;
-
+ return pci_host_probe(bridge);
fail:
__brcm_pcie_remove(pcie);
return ret;
@@ -1625,8 +1428,8 @@ fail:
MODULE_DEVICE_TABLE(of, brcm_pcie_match);
static const struct dev_pm_ops brcm_pcie_pm_ops = {
- .suspend_noirq = brcm_pcie_suspend,
- .resume_noirq = brcm_pcie_resume,
+ .suspend = brcm_pcie_suspend,
+ .resume = brcm_pcie_resume,
};
static struct platform_driver brcm_pcie_driver = {
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 876182873468..cfaf40a540a8 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2967,6 +2967,8 @@ static const struct dmi_system_id bridge_d3_blacklist[] = {
DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
DMI_MATCH(DMI_BOARD_NAME, "X299 DESIGNARE EX-CF"),
},
+ },
+ {
/*
* Downstream device is not accessible after putting a root port
* into D3cold and back into D0 on Elo i2.