Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Device tree conversions for samsung and tegra

Both platforms had some initial device tree support, but this adds
much more to actually make it usable.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN
  ARM: EXYNOS: Add Exynos4 device tree enabled board file
  rtc: rtc-s3c: Add device tree support
  input: samsung-keypad: Add device tree support
  ARM: S5PV210: Modify platform data for pl330 driver
  ARM: S5PC100: Modify platform data for pl330 driver
  ARM: S5P64x0: Modify platform data for pl330 driver
  ARM: EXYNOS: Add a alias for pdma clocks
  ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build
  ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers
  DMA: PL330: Add device tree support
  ARM: EXYNOS: Modify platform data for pl330 driver
  DMA: PL330: Infer transfer direction from transfer request instead of platform data
  DMA: PL330: move filter function into driver
  serial: samsung: Fix build for non-Exynos4210 devices
  serial: samsung: add device tree support
  serial: samsung: merge probe() function from all SoC specific extensions
  serial: samsung: merge all SoC specific port reset functions
  ARM: SAMSUNG: register uart clocks to clock lookup list
  serial: samsung: remove all uses of get_clksrc and set_clksrc
  ...

Fix up fairly trivial conflicts in arch/arm/mach-s3c2440/clock.c and
drivers/tty/serial/Kconfig both due to just adding code close to
changes.

14 files changed, 776 insertions, 1130 deletions

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 2d8d1b041d95..09adcfcd953e 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -19,6 +19,7 @@
 #include <linux/amba/pl330.h>
 #include <linux/pm_runtime.h>
 #include <linux/scatterlist.h>
+#include <linux/of.h>
 
 #define NR_DEFAULT_DESC	16
 
@@ -116,6 +117,9 @@ struct dma_pl330_desc {
 	struct dma_pl330_chan *pchan;
 };
 
+/* forward declaration */
+static struct amba_driver pl330_driver;
+
 static inline struct dma_pl330_chan *
 to_pchan(struct dma_chan *ch)
 {
@@ -267,6 +271,32 @@ static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
 	tasklet_schedule(&pch->task);
 }
 
+bool pl330_filter(struct dma_chan *chan, void *param)
+{
+	u8 *peri_id;
+
+	if (chan->device->dev->driver != &pl330_driver.drv)
+		return false;
+
+#ifdef CONFIG_OF
+	if (chan->device->dev->of_node) {
+		const __be32 *prop_value;
+		phandle phandle;
+		struct device_node *node;
+
+		prop_value = ((struct property *)param)->value;
+		phandle = be32_to_cpup(prop_value++);
+		node = of_find_node_by_phandle(phandle);
+		return ((chan->private == node) &&
+				(chan->chan_id == be32_to_cpup(prop_value)));
+	}
+#endif
+
+	peri_id = chan->private;
+	return *peri_id == (unsigned)param;
+}
+EXPORT_SYMBOL(pl330_filter);
+
 static int pl330_alloc_chan_resources(struct dma_chan *chan)
 {
 	struct dma_pl330_chan *pch = to_pchan(chan);
@@ -497,7 +527,7 @@ pluck_desc(struct dma_pl330_dmac *pdmac)
 static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
 {
 	struct dma_pl330_dmac *pdmac = pch->dmac;
-	struct dma_pl330_peri *peri = pch->chan.private;
+	u8 *peri_id = pch->chan.private;
 	struct dma_pl330_desc *desc;
 
 	/* Pluck one desc from the pool of DMAC */
@@ -522,13 +552,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
 	desc->txd.cookie = 0;
 	async_tx_ack(&desc->txd);
 
-	if (peri) {
-		desc->req.rqtype = peri->rqtype;
-		desc->req.peri = pch->chan.chan_id;
-	} else {
-		desc->req.rqtype = MEMTOMEM;
-		desc->req.peri = 0;
-	}
+	desc->req.peri = peri_id ? pch->chan.chan_id : 0;
 
 	dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
 
@@ -615,12 +639,14 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
 	case DMA_TO_DEVICE:
 		desc->rqcfg.src_inc = 1;
 		desc->rqcfg.dst_inc = 0;
+		desc->req.rqtype = MEMTODEV;
 		src = dma_addr;
 		dst = pch->fifo_addr;
 		break;
 	case DMA_FROM_DEVICE:
 		desc->rqcfg.src_inc = 0;
 		desc->rqcfg.dst_inc = 1;
+		desc->req.rqtype = DEVTOMEM;
 		src = pch->fifo_addr;
 		dst = dma_addr;
 		break;
@@ -646,16 +672,12 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
 {
 	struct dma_pl330_desc *desc;
 	struct dma_pl330_chan *pch = to_pchan(chan);
-	struct dma_pl330_peri *peri = chan->private;
 	struct pl330_info *pi;
 	int burst;
 
 	if (unlikely(!pch || !len))
 		return NULL;
 
-	if (peri && peri->rqtype != MEMTOMEM)
-		return NULL;
-
 	pi = &pch->dmac->pif;
 
 	desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
@@ -664,6 +686,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
 
 	desc->rqcfg.src_inc = 1;
 	desc->rqcfg.dst_inc = 1;
+	desc->req.rqtype = MEMTOMEM;
 
 	/* Select max possible burst size */
 	burst = pi->pcfg.data_bus_width / 8;
@@ -692,25 +715,14 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 {
 	struct dma_pl330_desc *first, *desc = NULL;
 	struct dma_pl330_chan *pch = to_pchan(chan);
-	struct dma_pl330_peri *peri = chan->private;
 	struct scatterlist *sg;
 	unsigned long flags;
 	int i;
 	dma_addr_t addr;
 
-	if (unlikely(!pch || !sgl || !sg_len || !peri))
+	if (unlikely(!pch || !sgl || !sg_len))
 		return NULL;
 
-	/* Make sure the direction is consistent */
-	if ((direction == DMA_TO_DEVICE &&
-				peri->rqtype != MEMTODEV) ||
-			(direction == DMA_FROM_DEVICE &&
-				peri->rqtype != DEVTOMEM)) {
-		dev_err(pch->dmac->pif.dev, "%s:%d Invalid Direction\n",
-				__func__, __LINE__);
-		return NULL;
-	}
-
 	addr = pch->fifo_addr;
 
 	first = NULL;
@@ -750,11 +762,13 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		if (direction == DMA_TO_DEVICE) {
 			desc->rqcfg.src_inc = 1;
 			desc->rqcfg.dst_inc = 0;
+			desc->req.rqtype = MEMTODEV;
 			fill_px(&desc->px,
 				addr, sg_dma_address(sg), sg_dma_len(sg));
 		} else {
 			desc->rqcfg.src_inc = 0;
 			desc->rqcfg.dst_inc = 1;
+			desc->req.rqtype = DEVTOMEM;
 			fill_px(&desc->px,
 				sg_dma_address(sg), addr, sg_dma_len(sg));
 		}
@@ -856,32 +870,16 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 	INIT_LIST_HEAD(&pd->channels);
 
 	/* Initialize channel parameters */
-	num_chan = max(pdat ? pdat->nr_valid_peri : 0, (u8)pi->pcfg.num_chan);
+	num_chan = max(pdat ? pdat->nr_valid_peri : (u8)pi->pcfg.num_peri,
+			(u8)pi->pcfg.num_chan);
 	pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
 
 	for (i = 0; i < num_chan; i++) {
 		pch = &pdmac->peripherals[i];
-		if (pdat) {
-			struct dma_pl330_peri *peri = &pdat->peri[i];
-
-			switch (peri->rqtype) {
-			case MEMTOMEM:
-				dma_cap_set(DMA_MEMCPY, pd->cap_mask);
-				break;
-			case MEMTODEV:
-			case DEVTOMEM:
-				dma_cap_set(DMA_SLAVE, pd->cap_mask);
-				dma_cap_set(DMA_CYCLIC, pd->cap_mask);
-				break;
-			default:
-				dev_err(&adev->dev, "DEVTODEV Not Supported\n");
-				continue;
-			}
-			pch->chan.private = peri;
-		} else {
-			dma_cap_set(DMA_MEMCPY, pd->cap_mask);
-			pch->chan.private = NULL;
-		}
+		if (!adev->dev.of_node)
+			pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
+		else
+			pch->chan.private = adev->dev.of_node;
 
 		INIT_LIST_HEAD(&pch->work_list);
 		spin_lock_init(&pch->lock);
@@ -894,6 +892,15 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 	}
 
 	pd->dev = &adev->dev;
+	if (pdat) {
+		pd->cap_mask = pdat->cap_mask;
+	} else {
+		dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+		if (pi->pcfg.num_peri) {
+			dma_cap_set(DMA_SLAVE, pd->cap_mask);
+			dma_cap_set(DMA_CYCLIC, pd->cap_mask);
+		}
+	}
 
 	pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
 	pd->device_free_chan_resources = pl330_free_chan_resources;
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index ab098ba9f1dd..a7661773c052 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -24,6 +24,9 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
 
 #include <asm/irq.h>
 
@@ -2383,6 +2386,63 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = {
 #endif
 };
 
+#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF)
+static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np,
+			      const void *gpio_spec, u32 *flags)
+{
+	const __be32 *gpio = gpio_spec;
+	const u32 n = be32_to_cpup(gpio);
+	unsigned int pin = gc->base + be32_to_cpu(gpio[0]);
+
+	if (WARN_ON(gc->of_gpio_n_cells < 4))
+		return -EINVAL;
+
+	if (n > gc->ngpio)
+		return -EINVAL;
+
+	if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1]))))
+		pr_warn("gpio_xlate: failed to set pin function\n");
+	if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2])))
+		pr_warn("gpio_xlate: failed to set pin pull up/down\n");
+	if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3])))
+		pr_warn("gpio_xlate: failed to set pin drive strength\n");
+
+	return n;
+}
+
+static const struct of_device_id exynos4_gpio_dt_match[] __initdata = {
+	{ .compatible = "samsung,exynos4-gpio", },
+	{}
+};
+
+static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+						 u64 base, u64 offset)
+{
+	struct gpio_chip *gc =  &chip->chip;
+	u64 address;
+
+	if (!of_have_populated_dt())
+		return;
+
+	address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
+	gc->of_node = of_find_matching_node_by_address(NULL,
+			exynos4_gpio_dt_match, address);
+	if (!gc->of_node) {
+		pr_info("gpio: device tree node not found for gpio controller"
+			" with base address %08llx\n", address);
+		return;
+	}
+	gc->of_gpio_n_cells = 4;
+	gc->of_xlate = exynos4_gpio_xlate;
+}
+#elif defined(CONFIG_ARCH_EXYNOS4)
+static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+						 u64 base, u64 offset)
+{
+	return;
+}
+#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */
+
 /* TODO: cleanup soc_is_* */
 static __init int samsung_gpiolib_init(void)
 {
@@ -2464,6 +2524,10 @@ static __init int samsung_gpiolib_init(void)
 				chip->config = &exynos4_gpio_cfg;
 				chip->group = group++;
 			}
+#ifdef CONFIG_CPU_EXYNOS4210
+			exynos4_gpiolib_attach_ofnode(chip,
+					EXYNOS4_PA_GPIO1, i * 0x20);
+#endif
 		}
 		samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
 
@@ -2476,6 +2540,10 @@ static __init int samsung_gpiolib_init(void)
 				chip->config = &exynos4_gpio_cfg;
 				chip->group = group++;
 			}
+#ifdef CONFIG_CPU_EXYNOS4210
+			exynos4_gpiolib_attach_ofnode(chip,
+					EXYNOS4_PA_GPIO2, i * 0x20);
+#endif
 		}
 		samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
 
@@ -2488,6 +2556,10 @@ static __init int samsung_gpiolib_init(void)
 				chip->config = &exynos4_gpio_cfg;
 				chip->group = group++;
 			}
+#ifdef CONFIG_CPU_EXYNOS4210
+			exynos4_gpiolib_attach_ofnode(chip,
+					EXYNOS4_PA_GPIO3, i * 0x20);
+#endif
 		}
 		samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
 
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index f689f49e3109..8a0060cd3982 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -21,6 +21,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/sched.h>
 #include <plat/keypad.h>
 
@@ -68,31 +70,26 @@ struct samsung_keypad {
 	wait_queue_head_t wait;
 	bool stopped;
 	int irq;
+	enum samsung_keypad_type type;
 	unsigned int row_shift;
 	unsigned int rows;
 	unsigned int cols;
 	unsigned int row_state[SAMSUNG_MAX_COLS];
+#ifdef CONFIG_OF
+	int row_gpios[SAMSUNG_MAX_ROWS];
+	int col_gpios[SAMSUNG_MAX_COLS];
+#endif
 	unsigned short keycodes[];
 };
 
-static int samsung_keypad_is_s5pv210(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	enum samsung_keypad_type type =
-		platform_get_device_id(pdev)->driver_data;
-
-	return type == KEYPAD_TYPE_S5PV210;
-}
-
 static void samsung_keypad_scan(struct samsung_keypad *keypad,
 				unsigned int *row_state)
 {
-	struct device *dev = keypad->input_dev->dev.parent;
 	unsigned int col;
 	unsigned int val;
 
 	for (col = 0; col < keypad->cols; col++) {
-		if (samsung_keypad_is_s5pv210(dev)) {
+		if (keypad->type == KEYPAD_TYPE_S5PV210) {
 			val = S5PV210_KEYIFCOLEN_MASK;
 			val &= ~(1 << col) << 8;
 		} else {
@@ -235,6 +232,126 @@ static void samsung_keypad_close(struct input_dev *input_dev)
 	samsung_keypad_stop(keypad);
 }
 
+#ifdef CONFIG_OF
+static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
+				struct device *dev)
+{
+	struct samsung_keypad_platdata *pdata;
+	struct matrix_keymap_data *keymap_data;
+	uint32_t *keymap, num_rows = 0, num_cols = 0;
+	struct device_node *np = dev->of_node, *key_np;
+	unsigned int key_count = 0;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(dev, "could not allocate memory for platform data\n");
+		return NULL;
+	}
+
+	of_property_read_u32(np, "samsung,keypad-num-rows", &num_rows);
+	of_property_read_u32(np, "samsung,keypad-num-columns", &num_cols);
+	if (!num_rows || !num_cols) {
+		dev_err(dev, "number of keypad rows/columns not specified\n");
+		return NULL;
+	}
+	pdata->rows = num_rows;
+	pdata->cols = num_cols;
+
+	keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL);
+	if (!keymap_data) {
+		dev_err(dev, "could not allocate memory for keymap data\n");
+		return NULL;
+	}
+	pdata->keymap_data = keymap_data;
+
+	for_each_child_of_node(np, key_np)
+		key_count++;
+
+	keymap_data->keymap_size = key_count;
+	keymap = devm_kzalloc(dev, sizeof(uint32_t) * key_count, GFP_KERNEL);
+	if (!keymap) {
+		dev_err(dev, "could not allocate memory for keymap\n");
+		return NULL;
+	}
+	keymap_data->keymap = keymap;
+
+	for_each_child_of_node(np, key_np) {
+		u32 row, col, key_code;
+		of_property_read_u32(key_np, "keypad,row", &row);
+		of_property_read_u32(key_np, "keypad,column", &col);
+		of_property_read_u32(key_np, "linux,code", &key_code);
+		*keymap++ = KEY(row, col, key_code);
+	}
+
+	if (of_get_property(np, "linux,input-no-autorepeat", NULL))
+		pdata->no_autorepeat = true;
+	if (of_get_property(np, "linux,input-wakeup", NULL))
+		pdata->wakeup = true;
+
+	return pdata;
+}
+
+static void samsung_keypad_parse_dt_gpio(struct device *dev,
+				struct samsung_keypad *keypad)
+{
+	struct device_node *np = dev->of_node;
+	int gpio, ret, row, col;
+
+	for (row = 0; row < keypad->rows; row++) {
+		gpio = of_get_named_gpio(np, "row-gpios", row);
+		keypad->row_gpios[row] = gpio;
+		if (!gpio_is_valid(gpio)) {
+			dev_err(dev, "keypad row[%d]: invalid gpio %d\n",
+					row, gpio);
+			continue;
+		}
+
+		ret = gpio_request(gpio, "keypad-row");
+		if (ret)
+			dev_err(dev, "keypad row[%d] gpio request failed\n",
+					row);
+	}
+
+	for (col = 0; col < keypad->cols; col++) {
+		gpio = of_get_named_gpio(np, "col-gpios", col);
+		keypad->col_gpios[col] = gpio;
+		if (!gpio_is_valid(gpio)) {
+			dev_err(dev, "keypad column[%d]: invalid gpio %d\n",
+					col, gpio);
+			continue;
+		}
+
+		ret = gpio_request(gpio, "keypad-col");
+		if (ret)
+			dev_err(dev, "keypad column[%d] gpio request failed\n",
+					col);
+	}
+}
+
+static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad)
+{
+	int cnt;
+
+	for (cnt = 0; cnt < keypad->rows; cnt++)
+		if (gpio_is_valid(keypad->row_gpios[cnt]))
+			gpio_free(keypad->row_gpios[cnt]);
+
+	for (cnt = 0; cnt < keypad->cols; cnt++)
+		if (gpio_is_valid(keypad->col_gpios[cnt]))
+			gpio_free(keypad->col_gpios[cnt]);
+}
+#else
+static
+struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev)
+{
+	return NULL;
+}
+
+static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad)
+{
+}
+#endif
+
 static int __devinit samsung_keypad_probe(struct platform_device *pdev)
 {
 	const struct samsung_keypad_platdata *pdata;
@@ -246,7 +363,10 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
 	unsigned int keymap_size;
 	int error;
 
-	pdata = pdev->dev.platform_data;
+	if (pdev->dev.of_node)
+		pdata = samsung_keypad_parse_dt(&pdev->dev);
+	else
+		pdata = pdev->dev.platform_data;
 	if (!pdata) {
 		dev_err(&pdev->dev, "no platform data defined\n");
 		return -EINVAL;
@@ -303,6 +423,16 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
 	keypad->cols = pdata->cols;
 	init_waitqueue_head(&keypad->wait);
 
+	if (pdev->dev.of_node) {
+#ifdef CONFIG_OF
+		samsung_keypad_parse_dt_gpio(&pdev->dev, keypad);
+		keypad->type = of_device_is_compatible(pdev->dev.of_node,
+					"samsung,s5pv210-keypad");
+#endif
+	} else {
+		keypad->type = platform_get_device_id(pdev)->driver_data;
+	}
+
 	input_dev->name = pdev->name;
 	input_dev->id.bustype = BUS_HOST;
 	input_dev->dev.parent = &pdev->dev;
@@ -343,12 +473,19 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, pdata->wakeup);
 	platform_set_drvdata(pdev, keypad);
+
+	if (pdev->dev.of_node) {
+		devm_kfree(&pdev->dev, (void *)pdata->keymap_data->keymap);
+		devm_kfree(&pdev->dev, (void *)pdata->keymap_data);
+		devm_kfree(&pdev->dev, (void *)pdata);
+	}
 	return 0;
 
 err_free_irq:
 	free_irq(keypad->irq, keypad);
 err_put_clk:
 	clk_put(keypad->clk);
+	samsung_keypad_dt_gpio_free(keypad);
 err_unmap_base:
 	iounmap(keypad->base);
 err_free_mem:
@@ -374,6 +511,7 @@ static int __devexit samsung_keypad_remove(struct platform_device *pdev)
 	free_irq(keypad->irq, keypad);
 
 	clk_put(keypad->clk);
+	samsung_keypad_dt_gpio_free(keypad);
 
 	iounmap(keypad->base);
 	kfree(keypad);
@@ -447,6 +585,17 @@ static const struct dev_pm_ops samsung_keypad_pm_ops = {
 };
 #endif
 
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_keypad_dt_match[] = {
+	{ .compatible = "samsung,s3c6410-keypad" },
+	{ .compatible = "samsung,s5pv210-keypad" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_keypad_dt_match);
+#else
+#define samsung_keypad_dt_match NULL
+#endif
+
 static struct platform_device_id samsung_keypad_driver_ids[] = {
 	{
 		.name		= "samsung-keypad",
@@ -465,6 +614,7 @@ static struct platform_driver samsung_keypad_driver = {
 	.driver		= {
 		.name	= "samsung-keypad",
 		.owner	= THIS_MODULE,
+		.of_match_table = samsung_keypad_dt_match,
 #ifdef CONFIG_PM
 		.pm	= &samsung_keypad_pm_ops,
 #endif
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 5b979d9cc332..175067a17c46 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -25,6 +25,7 @@
 #include <linux/clk.h>
 #include <linux/log2.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 #include <mach/hardware.h>
 #include <asm/uaccess.h>
@@ -507,7 +508,13 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 		goto err_nortc;
 	}
 
-	s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+#ifdef CONFIG_OF
+	if (pdev->dev.of_node)
+		s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node,
+			"samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410;
+	else
+#endif
+		s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
 
 	/* Check RTC Time */
 
@@ -629,6 +636,17 @@ static int s3c_rtc_resume(struct platform_device *pdev)
 #define s3c_rtc_resume  NULL
 #endif
 
+#ifdef CONFIG_OF
+static const struct of_device_id s3c_rtc_dt_match[] = {
+	{ .compatible = "samsung,s3c2410-rtc" },
+	{ .compatible = "samsung,s3c6410-rtc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match);
+#else
+#define s3c_rtc_dt_match NULL
+#endif
+
 static struct platform_device_id s3c_rtc_driver_ids[] = {
 	{
 		.name		= "s3c2410-rtc",
@@ -651,6 +669,7 @@ static struct platform_driver s3c_rtc_driver = {
 	.driver		= {
 		.name	= "s3c-rtc",
 		.owner	= THIS_MODULE,
+		.of_match_table	= s3c_rtc_dt_match,
 	},
 };
 
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 113fccf82517..f32a2ea70100 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -462,7 +462,7 @@ config SERIAL_SAMSUNG
 config SERIAL_SAMSUNG_UARTS_4
 	bool
 	depends on ARM && PLAT_SAMSUNG
-	default y if CPU_S3C2443
+	default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
 	help
 	  Internal node for the common case of 4 Samsung compatible UARTs
 
@@ -470,7 +470,7 @@ config SERIAL_SAMSUNG_UARTS
 	int
 	depends on ARM && PLAT_SAMSUNG
 	default 6 if ARCH_S5P6450
-	default 4 if SERIAL_SAMSUNG_UARTS_4
+	default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
 	default 3
 	help
 	  Select the number of available UART ports for the Samsung S3C
@@ -500,46 +500,6 @@ config SERIAL_SAMSUNG_CONSOLE
 	  your boot loader about how to pass options to the kernel at
 	  boot time.)
 
-config SERIAL_S3C2410
-	tristate "Samsung S3C2410 Serial port support"
-	depends on SERIAL_SAMSUNG && CPU_S3C2410
-	default y if CPU_S3C2410
-	help
-	  Serial port support for the Samsung S3C2410 SoC
-
-config SERIAL_S3C2412
-	tristate "Samsung S3C2412/S3C2413 Serial port support"
-	depends on SERIAL_SAMSUNG && CPU_S3C2412
-	default y if CPU_S3C2412
-	help
-	  Serial port support for the Samsung S3C2412 and S3C2413 SoC
-
-config SERIAL_S3C2440
-	tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416)
-	default y if CPU_S3C2440
-	default y if CPU_S3C2442
-	select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416
-	help
-	  Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
-
-config SERIAL_S3C6400
-	tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100)
-	select SERIAL_SAMSUNG_UARTS_4
-	default y
-	help
-	  Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450
-	  and S5PC100 SoCs
-
-config SERIAL_S5PV210
-	tristate "Samsung S5PV210 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212)
-	select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212)
-	default y
-	help
-	  Serial port support for Samsung's S5P Family of SoC's
-
 config SERIAL_SIRFSOC
         tristate "SiRF SoC Platform Serial port support"
         depends on ARM && ARCH_PRIMA2
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 75eadb8d7178..07e0494c6830 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -40,11 +40,6 @@ obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
 obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o
 obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
-obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
-obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
-obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
-obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
-obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
 obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
diff --git a/drivers/tty/serial/s3c2410.c b/drivers/tty/serial/s3c2410.c
deleted file mode 100644
index b1d7e7c1849d..000000000000
--- a/drivers/tty/serial/s3c2410.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Driver for Samsung S3C2410 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c2410_serial_setsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	if (strcmp(clk->name, "uclk") == 0)
-		ucon |= S3C2410_UCON_UCLK;
-	else
-		ucon &= ~S3C2410_UCON_UCLK;
-
-	wr_regl(port, S3C2410_UCON, ucon);
-	return 0;
-}
-
-static int s3c2410_serial_getsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	clk->divisor = 1;
-	clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
-
-	return 0;
-}
-
-static int s3c2410_serial_resetport(struct uart_port *port,
-				    struct s3c2410_uartcfg *cfg)
-{
-	dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n",
-	    port, port->mapbase, cfg);
-
-	wr_regl(port, S3C2410_UCON,  cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	return 0;
-}
-
-static struct s3c24xx_uart_info s3c2410_uart_inf = {
-	.name		= "Samsung S3C2410 UART",
-	.type		= PORT_S3C2410,
-	.fifosize	= 16,
-	.rx_fifomask	= S3C2410_UFSTAT_RXMASK,
-	.rx_fifoshift	= S3C2410_UFSTAT_RXSHIFT,
-	.rx_fifofull	= S3C2410_UFSTAT_RXFULL,
-	.tx_fifofull	= S3C2410_UFSTAT_TXFULL,
-	.tx_fifomask	= S3C2410_UFSTAT_TXMASK,
-	.tx_fifoshift	= S3C2410_UFSTAT_TXSHIFT,
-	.get_clksrc	= s3c2410_serial_getsource,
-	.set_clksrc	= s3c2410_serial_setsource,
-	.reset_port	= s3c2410_serial_resetport,
-};
-
-static int s3c2410_serial_probe(struct platform_device *dev)
-{
-	return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
-}
-
-static struct platform_driver s3c2410_serial_driver = {
-	.probe		= s3c2410_serial_probe,
-	.remove		= __devexit_p(s3c24xx_serial_remove),
-	.driver		= {
-		.name	= "s3c2410-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init s3c2410_serial_init(void)
-{
-	return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
-}
-
-static void __exit s3c2410_serial_exit(void)
-{
-	platform_driver_unregister(&s3c2410_serial_driver);
-}
-
-module_init(s3c2410_serial_init);
-module_exit(s3c2410_serial_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver");
-MODULE_ALIAS("platform:s3c2410-uart");
diff --git a/drivers/tty/serial/s3c2412.c b/drivers/tty/serial/s3c2412.c
deleted file mode 100644
index 2234bf9ced45..000000000000
--- a/drivers/tty/serial/s3c2412.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c2412_serial_setsource(struct uart_port *port,
-				     struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	ucon &= ~S3C2412_UCON_CLKMASK;
-
-	if (strcmp(clk->name, "uclk") == 0)
-		ucon |= S3C2440_UCON_UCLK;
-	else if (strcmp(clk->name, "pclk") == 0)
-		ucon |= S3C2440_UCON_PCLK;
-	else if (strcmp(clk->name, "usysclk") == 0)
-		ucon |= S3C2412_UCON_USYSCLK;
-	else {
-		printk(KERN_ERR "unknown clock source %s\n", clk->name);
-		return -EINVAL;
-	}
-
-	wr_regl(port, S3C2410_UCON, ucon);
-	return 0;
-}
-
-
-static int s3c2412_serial_getsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	switch (ucon & S3C2412_UCON_CLKMASK) {
-	case S3C2412_UCON_UCLK:
-		clk->divisor = 1;
-		clk->name = "uclk";
-		break;
-
-	case S3C2412_UCON_PCLK:
-	case S3C2412_UCON_PCLK2:
-		clk->divisor = 1;
-		clk->name = "pclk";
-		break;
-
-	case S3C2412_UCON_USYSCLK:
-		clk->divisor = 1;
-		clk->name = "usysclk";
-		break;
-	}
-
-	return 0;
-}
-
-static int s3c2412_serial_resetport(struct uart_port *port,
-				    struct s3c2410_uartcfg *cfg)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	dbg("%s: port=%p (%08lx), cfg=%p\n",
-	    __func__, port, port->mapbase, cfg);
-
-	/* ensure we don't change the clock settings... */
-
-	ucon &= S3C2412_UCON_CLKMASK;
-
-	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	return 0;
-}
-
-static struct s3c24xx_uart_info s3c2412_uart_inf = {
-	.name		= "Samsung S3C2412 UART",
-	.type		= PORT_S3C2412,
-	.fifosize	= 64,
-	.has_divslot	= 1,
-	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
-	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
-	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
-	.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
-	.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
-	.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
-	.get_clksrc	= s3c2412_serial_getsource,
-	.set_clksrc	= s3c2412_serial_setsource,
-	.reset_port	= s3c2412_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2412_serial_probe(struct platform_device *dev)
-{
-	dbg("s3c2440_serial_probe: dev=%p\n", dev);
-	return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
-}
-
-static struct platform_driver s3c2412_serial_driver = {
-	.probe		= s3c2412_serial_probe,
-	.remove		= __devexit_p(s3c24xx_serial_remove),
-	.driver		= {
-		.name	= "s3c2412-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static inline int s3c2412_serial_init(void)
-{
-	return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
-}
-
-static inline void s3c2412_serial_exit(void)
-{
-	platform_driver_unregister(&s3c2412_serial_driver);
-}
-
-module_init(s3c2412_serial_init);
-module_exit(s3c2412_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c2412-uart");
diff --git a/drivers/tty/serial/s3c2440.c b/drivers/tty/serial/s3c2440.c
deleted file mode 100644
index 1d0c324b813f..000000000000
--- a/drivers/tty/serial/s3c2440.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-
-static int s3c2440_serial_setsource(struct uart_port *port,
-				     struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	/* todo - proper fclk<>nonfclk switch. */
-
-	ucon &= ~S3C2440_UCON_CLKMASK;
-
-	if (strcmp(clk->name, "uclk") == 0)
-		ucon |= S3C2440_UCON_UCLK;
-	else if (strcmp(clk->name, "pclk") == 0)
-		ucon |= S3C2440_UCON_PCLK;
-	else if (strcmp(clk->name, "fclk") == 0)
-		ucon |= S3C2440_UCON_FCLK;
-	else {
-		printk(KERN_ERR "unknown clock source %s\n", clk->name);
-		return -EINVAL;
-	}
-
-	wr_regl(port, S3C2410_UCON, ucon);
-	return 0;
-}
-
-
-static int s3c2440_serial_getsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-	unsigned long ucon0, ucon1, ucon2;
-
-	switch (ucon & S3C2440_UCON_CLKMASK) {
-	case S3C2440_UCON_UCLK:
-		clk->divisor = 1;
-		clk->name = "uclk";
-		break;
-
-	case S3C2440_UCON_PCLK:
-	case S3C2440_UCON_PCLK2:
-		clk->divisor = 1;
-		clk->name = "pclk";
-		break;
-
-	case S3C2440_UCON_FCLK:
-		/* the fun of calculating the uart divisors on
-		 * the s3c2440 */
-
-		ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
-		ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
-		ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
-		printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
-
-		ucon0 &= S3C2440_UCON0_DIVMASK;
-		ucon1 &= S3C2440_UCON1_DIVMASK;
-		ucon2 &= S3C2440_UCON2_DIVMASK;
-
-		if (ucon0 != 0) {
-			clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
-			clk->divisor += 6;
-		} else if (ucon1 != 0) {
-			clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
-			clk->divisor += 21;
-		} else if (ucon2 != 0) {
-			clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
-			clk->divisor += 36;
-		} else {
-			/* manual calims 44, seems to be 9 */
-			clk->divisor = 9;
-		}
-
-		clk->name = "fclk";
-		break;
-	}
-
-	return 0;
-}
-
-static int s3c2440_serial_resetport(struct uart_port *port,
-				    struct s3c2410_uartcfg *cfg)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
-	    port, port->mapbase, cfg);
-
-	/* ensure we don't change the clock settings... */
-
-	ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
-
-	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	return 0;
-}
-
-static struct s3c24xx_uart_info s3c2440_uart_inf = {
-	.name		= "Samsung S3C2440 UART",
-	.type		= PORT_S3C2440,
-	.fifosize	= 64,
-	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
-	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
-	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
-	.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
-	.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
-	.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
-	.get_clksrc	= s3c2440_serial_getsource,
-	.set_clksrc	= s3c2440_serial_setsource,
-	.reset_port	= s3c2440_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2440_serial_probe(struct platform_device *dev)
-{
-	dbg("s3c2440_serial_probe: dev=%p\n", dev);
-	return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
-}
-
-static struct platform_driver s3c2440_serial_driver = {
-	.probe		= s3c2440_serial_probe,
-	.remove		= __devexit_p(s3c24xx_serial_remove),
-	.driver		= {
-		.name	= "s3c2440-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init s3c2440_serial_init(void)
-{
-	return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
-}
-
-static void __exit s3c2440_serial_exit(void)
-{
-	platform_driver_unregister(&s3c2440_serial_driver);
-}
-
-module_init(s3c2440_serial_init);
-module_exit(s3c2440_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/tty/serial/s3c6400.c b/drivers/tty/serial/s3c6400.c
deleted file mode 100644
index e2f6913d84d5..000000000000
--- a/drivers/tty/serial/s3c6400.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs.
- *
- * Copyright 2008 Openmoko,  Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-
-#include "samsung.h"
-
-static int s3c6400_serial_setsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	if (strcmp(clk->name, "uclk0") == 0) {
-		ucon &= ~S3C6400_UCON_CLKMASK;
-		ucon |= S3C6400_UCON_UCLK0;
-	} else if (strcmp(clk->name, "uclk1") == 0)
-		ucon |= S3C6400_UCON_UCLK1;
-	else if (strcmp(clk->name, "pclk") == 0) {
-		/* See notes about transitioning from UCLK to PCLK */
-		ucon &= ~S3C6400_UCON_UCLK0;
-	} else {
-		printk(KERN_ERR "unknown clock source %s\n", clk->name);
-		return -EINVAL;
-	}
-
-	wr_regl(port, S3C2410_UCON, ucon);
-	return 0;
-}
-
-
-static int s3c6400_serial_getsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	u32 ucon = rd_regl(port, S3C2410_UCON);
-
-	clk->divisor = 1;
-
-	switch (ucon & S3C6400_UCON_CLKMASK) {
-	case S3C6400_UCON_UCLK0:
-		clk->name = "uclk0";
-		break;
-
-	case S3C6400_UCON_UCLK1:
-		clk->name = "uclk1";
-		break;
-
-	case S3C6400_UCON_PCLK:
-	case S3C6400_UCON_PCLK2:
-		clk->name = "pclk";
-		break;
-	}
-
-	return 0;
-}
-
-static int s3c6400_serial_resetport(struct uart_port *port,
-				    struct s3c2410_uartcfg *cfg)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n",
-	    port, port->mapbase, cfg);
-
-	/* ensure we don't change the clock settings... */
-
-	ucon &= S3C6400_UCON_CLKMASK;
-
-	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	return 0;
-}
-
-static struct s3c24xx_uart_info s3c6400_uart_inf = {
-	.name		= "Samsung S3C6400 UART",
-	.type		= PORT_S3C6400,
-	.fifosize	= 64,
-	.has_divslot	= 1,
-	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
-	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
-	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
-	.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
-	.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
-	.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
-	.get_clksrc	= s3c6400_serial_getsource,
-	.set_clksrc	= s3c6400_serial_setsource,
-	.reset_port	= s3c6400_serial_resetport,
-};
-
-/* device management */
-
-static int s3c6400_serial_probe(struct platform_device *dev)
-{
-	dbg("s3c6400_serial_probe: dev=%p\n", dev);
-	return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
-}
-
-static struct platform_driver s3c6400_serial_driver = {
-	.probe		= s3c6400_serial_probe,
-	.remove		= __devexit_p(s3c24xx_serial_remove),
-	.driver		= {
-		.name	= "s3c6400-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init s3c6400_serial_init(void)
-{
-	return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
-}
-
-static void __exit s3c6400_serial_exit(void)
-{
-	platform_driver_unregister(&s3c6400_serial_driver);
-}
-
-module_init(s3c6400_serial_init);
-module_exit(s3c6400_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c6400-uart");
diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c
deleted file mode 100644
index 8b0b888a1b76..000000000000
--- a/drivers/tty/serial/s5pv210.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on drivers/serial/s3c6400.c
- *
- * Driver for Samsung S5PV210 SoC UARTs.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/delay.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <plat/regs-serial.h>
-#include "samsung.h"
-
-static int s5pv210_serial_setsource(struct uart_port *port,
-					struct s3c24xx_uart_clksrc *clk)
-{
-	struct s3c2410_uartcfg *cfg = port->dev->platform_data;
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	if (cfg->flags & NO_NEED_CHECK_CLKSRC)
-		return 0;
-
-	if (strcmp(clk->name, "pclk") == 0)
-		ucon &= ~S5PV210_UCON_CLKMASK;
-	else if (strcmp(clk->name, "uclk1") == 0)
-		ucon |= S5PV210_UCON_CLKMASK;
-	else {
-		printk(KERN_ERR "unknown clock source %s\n", clk->name);
-		return -EINVAL;
-	}
-
-	wr_regl(port, S3C2410_UCON, ucon);
-	return 0;
-}
-
-
-static int s5pv210_serial_getsource(struct uart_port *port,
-					struct s3c24xx_uart_clksrc *clk)
-{
-	struct s3c2410_uartcfg *cfg = port->dev->platform_data;
-	u32 ucon = rd_regl(port, S3C2410_UCON);
-
-	clk->divisor = 1;
-
-	if (cfg->flags & NO_NEED_CHECK_CLKSRC)
-		return 0;
-
-	switch (ucon & S5PV210_UCON_CLKMASK) {
-	case S5PV210_UCON_PCLK:
-		clk->name = "pclk";
-		break;
-	case S5PV210_UCON_UCLK:
-		clk->name = "uclk1";
-		break;
-	}
-
-	return 0;
-}
-
-static int s5pv210_serial_resetport(struct uart_port *port,
-					struct s3c2410_uartcfg *cfg)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	ucon &= S5PV210_UCON_CLKMASK;
-	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	/* It is need to delay When reset FIFO register */
-	udelay(1);
-
-	return 0;
-}
-
-#define S5PV210_UART_DEFAULT_INFO(fifo_size)			\
-		.name		= "Samsung S5PV210 UART0",	\
-		.type		= PORT_S3C6400,			\
-		.fifosize	= fifo_size,			\
-		.has_divslot	= 1,				\
-		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,	\
-		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,	\
-		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,	\
-		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,	\
-		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,	\
-		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,	\
-		.get_clksrc	= s5pv210_serial_getsource,	\
-		.set_clksrc	= s5pv210_serial_setsource,	\
-		.reset_port	= s5pv210_serial_resetport
-
-static struct s3c24xx_uart_info s5p_port_fifo256 = {
-	S5PV210_UART_DEFAULT_INFO(256),
-};
-
-static struct s3c24xx_uart_info s5p_port_fifo64 = {
-	S5PV210_UART_DEFAULT_INFO(64),
-};
-
-static struct s3c24xx_uart_info s5p_port_fifo16 = {
-	S5PV210_UART_DEFAULT_INFO(16),
-};
-
-static struct s3c24xx_uart_info *s5p_uart_inf[] = {
-	[0] = &s5p_port_fifo256,
-	[1] = &s5p_port_fifo64,
-	[2] = &s5p_port_fifo16,
-	[3] = &s5p_port_fifo16,
-};
-
-/* device management */
-static int s5p_serial_probe(struct platform_device *pdev)
-{
-	return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
-}
-
-static struct platform_driver s5p_serial_driver = {
-	.probe		= s5p_serial_probe,
-	.remove		= __devexit_p(s3c24xx_serial_remove),
-	.driver		= {
-		.name	= "s5pv210-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init s5p_serial_init(void)
-{
-	return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf);
-}
-
-static void __exit s5p_serial_exit(void)
-{
-	platform_driver_unregister(&s5p_serial_driver);
-}
-
-module_init(s5p_serial_init);
-module_exit(s5p_serial_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s5pv210-uart");
-MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support");
-MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index b31f1c3a2c4c..f96f37b5fec6 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -42,6 +42,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
+#include <linux/of.h>
 
 #include <asm/irq.h>
 
@@ -49,6 +50,7 @@
 #include <mach/map.h>
 
 #include <plat/regs-serial.h>
+#include <plat/clock.h>
 
 #include "samsung.h"
 
@@ -190,10 +192,13 @@ static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *p
 
 static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
 {
+	struct s3c24xx_uart_port *ourport;
+
 	if (port->dev == NULL)
 		return NULL;
 
-	return (struct s3c2410_uartcfg *)port->dev->platform_data;
+	ourport = container_of(port, struct s3c24xx_uart_port, port);
+	return ourport->cfg;
 }
 
 static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
@@ -202,7 +207,7 @@ static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
 	struct s3c24xx_uart_info *info = ourport->info;
 
 	if (ufstat & info->rx_fifofull)
-		return info->fifosize;
+		return ourport->port.fifosize;
 
 	return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
 }
@@ -555,154 +560,98 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
  *
 */
 
+#define MAX_CLK_NAME_LENGTH 15
 
-#define MAX_CLKS (8)
-
-static struct s3c24xx_uart_clksrc tmp_clksrc = {
-	.name		= "pclk",
-	.min_baud	= 0,
-	.max_baud	= 0,
-	.divisor	= 1,
-};
-
-static inline int
-s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
+static inline int s3c24xx_serial_getsource(struct uart_port *port)
 {
 	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned int ucon;
 
-	return (info->get_clksrc)(port, c);
-}
-
-static inline int
-s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
-{
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	if (info->num_clks == 1)
+		return 0;
 
-	return (info->set_clksrc)(port, c);
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon &= info->clksel_mask;
+	return ucon >> info->clksel_shift;
 }
 
-struct baud_calc {
-	struct s3c24xx_uart_clksrc	*clksrc;
-	unsigned int			 calc;
-	unsigned int			 divslot;
-	unsigned int			 quot;
-	struct clk			*src;
-};
-
-static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
-				   struct uart_port *port,
-				   struct s3c24xx_uart_clksrc *clksrc,
-				   unsigned int baud)
+static void s3c24xx_serial_setsource(struct uart_port *port,
+			unsigned int clk_sel)
 {
-	struct s3c24xx_uart_port *ourport = to_ourport(port);
-	unsigned long rate;
-
-	calc->src = clk_get(port->dev, clksrc->name);
-	if (calc->src == NULL || IS_ERR(calc->src))
-		return 0;
-
-	rate = clk_get_rate(calc->src);
-	rate /= clksrc->divisor;
+	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned int ucon;
 
-	calc->clksrc = clksrc;
+	if (info->num_clks == 1)
+		return;
 
-	if (ourport->info->has_divslot) {
-		unsigned long div = rate / baud;
-
-		/* The UDIVSLOT register on the newer UARTs allows us to
-		 * get a divisor adjustment of 1/16th on the baud clock.
-		 *
-		 * We don't keep the UDIVSLOT value (the 16ths we calculated
-		 * by not multiplying the baud by 16) as it is easy enough
-		 * to recalculate.
-		 */
-
-		calc->quot = div / 16;
-		calc->calc = rate / div;
-	} else {
-		calc->quot = (rate + (8 * baud)) / (16 * baud);
-		calc->calc = (rate / (calc->quot * 16));
-	}
+	ucon = rd_regl(port, S3C2410_UCON);
+	if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel)
+		return;
 
-	calc->quot--;
-	return 1;
+	ucon &= ~info->clksel_mask;
+	ucon |= clk_sel << info->clksel_shift;
+	wr_regl(port, S3C2410_UCON, ucon);
 }
 
-static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
-					  struct s3c24xx_uart_clksrc **clksrc,
-					  struct clk **clk,
-					  unsigned int baud)
+static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
+			unsigned int req_baud, struct clk **best_clk,
+			unsigned int *clk_num)
 {
-	struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
-	struct s3c24xx_uart_clksrc *clkp;
-	struct baud_calc res[MAX_CLKS];
-	struct baud_calc *resptr, *best, *sptr;
-	int i;
-
-	clkp = cfg->clocks;
-	best = NULL;
-
-	if (cfg->clocks_size < 2) {
-		if (cfg->clocks_size == 0)
-			clkp = &tmp_clksrc;
-
-		/* check to see if we're sourcing fclk, and if so we're
-		 * going to have to update the clock source
-		 */
-
-		if (strcmp(clkp->name, "fclk") == 0) {
-			struct s3c24xx_uart_clksrc src;
-
-			s3c24xx_serial_getsource(port, &src);
-
-			/* check that the port already using fclk, and if
-			 * not, then re-select fclk
+	struct s3c24xx_uart_info *info = ourport->info;
+	struct clk *clk;
+	unsigned long rate;
+	unsigned int cnt, baud, quot, clk_sel, best_quot = 0;
+	char clkname[MAX_CLK_NAME_LENGTH];
+	int calc_deviation, deviation = (1 << 30) - 1;
+
+	*best_clk = NULL;
+	clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
+			ourport->info->def_clk_sel;
+	for (cnt = 0; cnt < info->num_clks; cnt++) {
+		if (!(clk_sel & (1 << cnt)))
+			continue;
+
+		sprintf(clkname, "clk_uart_baud%d", cnt);
+		clk = clk_get(ourport->port.dev, clkname);
+		if (IS_ERR_OR_NULL(clk))
+			continue;
+
+		rate = clk_get_rate(clk);
+		if (!rate)
+			continue;
+
+		if (ourport->info->has_divslot) {
+			unsigned long div = rate / req_baud;
+
+			/* The UDIVSLOT register on the newer UARTs allows us to
+			 * get a divisor adjustment of 1/16th on the baud clock.
+			 *
+			 * We don't keep the UDIVSLOT value (the 16ths we
+			 * calculated by not multiplying the baud by 16) as it
+			 * is easy enough to recalculate.
 			 */
 
-			if (strcmp(src.name, clkp->name) == 0) {
-				s3c24xx_serial_setsource(port, clkp);
-				s3c24xx_serial_getsource(port, &src);
-			}
-
-			clkp->divisor = src.divisor;
-		}
-
-		s3c24xx_serial_calcbaud(res, port, clkp, baud);
-		best = res;
-		resptr = best + 1;
-	} else {
-		resptr = res;
-
-		for (i = 0; i < cfg->clocks_size; i++, clkp++) {
-			if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
-				resptr++;
+			quot = div / 16;
+			baud = rate / div;
+		} else {
+			quot = (rate + (8 * req_baud)) / (16 * req_baud);
+			baud = rate / (quot * 16);
 		}
-	}
-
-	/* ok, we now need to select the best clock we found */
-
-	if (!best) {
-		unsigned int deviation = (1<<30)|((1<<30)-1);
-		int calc_deviation;
+		quot--;
 
-		for (sptr = res; sptr < resptr; sptr++) {
-			calc_deviation = baud - sptr->calc;
-			if (calc_deviation < 0)
-				calc_deviation = -calc_deviation;
+		calc_deviation = req_baud - baud;
+		if (calc_deviation < 0)
+			calc_deviation = -calc_deviation;
 
-			if (calc_deviation < deviation) {
-				best = sptr;
-				deviation = calc_deviation;
-			}
+		if (calc_deviation < deviation) {
+			*best_clk = clk;
+			best_quot = quot;
+			*clk_num = cnt;
+			deviation = calc_deviation;
 		}
 	}
 
-	/* store results to pass back */
-
-	*clksrc = best->clksrc;
-	*clk    = best->src;
-
-	return best->quot;
+	return best_quot;
 }
 
 /* udivslot_table[]
@@ -735,10 +684,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 {
 	struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
-	struct s3c24xx_uart_clksrc *clksrc = NULL;
 	struct clk *clk = NULL;
 	unsigned long flags;
-	unsigned int baud, quot;
+	unsigned int baud, quot, clk_sel = 0;
 	unsigned int ulcon;
 	unsigned int umcon;
 	unsigned int udivslot = 0;
@@ -754,17 +702,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	 */
 
 	baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
-
+	quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
 	if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
 		quot = port->custom_divisor;
-	else
-		quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
+	if (!clk)
+		return;
 
 	/* check to see if we need  to change clock source */
 
-	if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
-		dbg("selecting clock %p\n", clk);
-		s3c24xx_serial_setsource(port, clksrc);
+	if (ourport->baudclk != clk) {
+		s3c24xx_serial_setsource(port, clk_sel);
 
 		if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
 			clk_disable(ourport->baudclk);
@@ -773,7 +720,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 		clk_enable(clk);
 
-		ourport->clksrc = clksrc;
 		ourport->baudclk = clk;
 		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
 	}
@@ -1020,16 +966,29 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
 
 /* s3c24xx_serial_resetport
  *
- * wrapper to call the specific reset for this port (reset the fifos
- * and the settings)
+ * reset the fifos and other the settings.
 */
 
-static inline int s3c24xx_serial_resetport(struct uart_port *port,
-					   struct s3c2410_uartcfg *cfg)
+static void s3c24xx_serial_resetport(struct uart_port *port,
+				   struct s3c2410_uartcfg *cfg)
 {
 	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+	unsigned int ucon_mask;
+
+	ucon_mask = info->clksel_mask;
+	if (info->type == PORT_S3C2440)
+		ucon_mask |= S3C2440_UCON0_DIVMASK;
 
-	return (info->reset_port)(port, cfg);
+	ucon &= ucon_mask;
+	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+
+	/* reset both fifos */
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	/* some delay is required after fifo reset */
+	udelay(1);
 }
 
 
@@ -1121,11 +1080,10 @@ static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *p
  */
 
 static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
-				    struct s3c24xx_uart_info *info,
 				    struct platform_device *platdev)
 {
 	struct uart_port *port = &ourport->port;
-	struct s3c2410_uartcfg *cfg;
+	struct s3c2410_uartcfg *cfg = ourport->cfg;
 	struct resource *res;
 	int ret;
 
@@ -1134,30 +1092,16 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	if (platdev == NULL)
 		return -ENODEV;
 
-	cfg = s3c24xx_dev_to_cfg(&platdev->dev);
-
 	if (port->mapbase != 0)
 		return 0;
 
-	if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
-		printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
-		       cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
-		return -ERANGE;
-	}
-
 	/* setup info for port */
 	port->dev	= &platdev->dev;
-	ourport->info	= info;
 
 	/* Startup sequence is different for s3c64xx and higher SoC's */
 	if (s3c24xx_serial_has_interrupt_mask(port))
 		s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
 
-	/* copy the info in from provided structure */
-	ourport->port.fifosize = info->fifosize;
-
-	dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
-
 	port->uartclk = 1;
 
 	if (cfg->uart_flags & UPF_CONS_FLOW) {
@@ -1215,43 +1159,74 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
 	struct uart_port *port = s3c24xx_dev_to_port(dev);
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
-	return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name);
+	return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
 }
 
 static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
 
+
 /* Device driver serial port probe */
 
+static const struct of_device_id s3c24xx_uart_dt_match[];
 static int probe_index;
 
-int s3c24xx_serial_probe(struct platform_device *dev,
-			 struct s3c24xx_uart_info *info)
+static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data(
+			struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node);
+		return (struct s3c24xx_serial_drv_data *)match->data;
+	}
+#endif
+	return (struct s3c24xx_serial_drv_data *)
+			platform_get_device_id(pdev)->driver_data;
+}
+
+static int s3c24xx_serial_probe(struct platform_device *pdev)
 {
 	struct s3c24xx_uart_port *ourport;
 	int ret;
 
-	dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
+	dbg("s3c24xx_serial_probe(%p) %d\n", pdev, probe_index);
 
 	ourport = &s3c24xx_serial_ports[probe_index];
+
+	ourport->drv_data = s3c24xx_get_driver_data(pdev);
+	if (!ourport->drv_data) {
+		dev_err(&pdev->dev, "could not find driver data\n");
+		return -ENODEV;
+	}
+
+	ourport->info = ourport->drv_data->info;
+	ourport->cfg = (pdev->dev.platform_data) ?
+			(struct s3c2410_uartcfg *)pdev->dev.platform_data :
+			ourport->drv_data->def_cfg;
+
+	ourport->port.fifosize = (ourport->info->fifosize) ?
+		ourport->info->fifosize :
+		ourport->drv_data->fifosize[probe_index];
+
 	probe_index++;
 
 	dbg("%s: initialising port %p...\n", __func__, ourport);
 
-	ret = s3c24xx_serial_init_port(ourport, info, dev);
+	ret = s3c24xx_serial_init_port(ourport, pdev);
 	if (ret < 0)
 		goto probe_err;
 
 	dbg("%s: adding port\n", __func__);
 	uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
-	platform_set_drvdata(dev, &ourport->port);
+	platform_set_drvdata(pdev, &ourport->port);
 
-	ret = device_create_file(&dev->dev, &dev_attr_clock_source);
+	ret = device_create_file(&pdev->dev, &dev_attr_clock_source);
 	if (ret < 0)
-		printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
+		dev_err(&pdev->dev, "failed to add clock source attr.\n");
 
 	ret = s3c24xx_serial_cpufreq_register(ourport);
 	if (ret < 0)
-		dev_err(&dev->dev, "failed to add cpufreq notifier\n");
+		dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
 
 	return 0;
 
@@ -1259,9 +1234,7 @@ int s3c24xx_serial_probe(struct platform_device *dev,
 	return ret;
 }
 
-EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
-
-int __devexit s3c24xx_serial_remove(struct platform_device *dev)
+static int __devexit s3c24xx_serial_remove(struct platform_device *dev)
 {
 	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
 
@@ -1274,8 +1247,6 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev)
 	return 0;
 }
 
-EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
-
 /* UART power management code */
 #ifdef CONFIG_PM_SLEEP
 static int s3c24xx_serial_suspend(struct device *dev)
@@ -1315,41 +1286,6 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
 #define SERIAL_SAMSUNG_PM_OPS	NULL
 #endif /* CONFIG_PM_SLEEP */
 
-int s3c24xx_serial_init(struct platform_driver *drv,
-			struct s3c24xx_uart_info *info)
-{
-	dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
-
-	drv->driver.pm = SERIAL_SAMSUNG_PM_OPS;
-
-	return platform_driver_register(drv);
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_serial_init);
-
-/* module initialisation code */
-
-static int __init s3c24xx_serial_modinit(void)
-{
-	int ret;
-
-	ret = uart_register_driver(&s3c24xx_uart_drv);
-	if (ret < 0) {
-		printk(KERN_ERR "failed to register UART driver\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-static void __exit s3c24xx_serial_modexit(void)
-{
-	uart_unregister_driver(&s3c24xx_uart_drv);
-}
-
-module_init(s3c24xx_serial_modinit);
-module_exit(s3c24xx_serial_modexit);
-
 /* Console code */
 
 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
@@ -1395,12 +1331,13 @@ static void __init
 s3c24xx_serial_get_options(struct uart_port *port, int *baud,
 			   int *parity, int *bits)
 {
-	struct s3c24xx_uart_clksrc clksrc;
 	struct clk *clk;
 	unsigned int ulcon;
 	unsigned int ucon;
 	unsigned int ubrdiv;
 	unsigned long rate;
+	unsigned int clk_sel;
+	char clk_name[MAX_CLK_NAME_LENGTH];
 
 	ulcon  = rd_regl(port, S3C2410_ULCON);
 	ucon   = rd_regl(port, S3C2410_UCON);
@@ -1445,44 +1382,21 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
 
 		/* now calculate the baud rate */
 
-		s3c24xx_serial_getsource(port, &clksrc);
+		clk_sel = s3c24xx_serial_getsource(port);
+		sprintf(clk_name, "clk_uart_baud%d", clk_sel);
 
-		clk = clk_get(port->dev, clksrc.name);
+		clk = clk_get(port->dev, clk_name);
 		if (!IS_ERR(clk) && clk != NULL)
-			rate = clk_get_rate(clk) / clksrc.divisor;
+			rate = clk_get_rate(clk);
 		else
 			rate = 1;
 
-
 		*baud = rate / (16 * (ubrdiv + 1));
 		dbg("calculated baud %d\n", *baud);
 	}
 
 }
 
-/* s3c24xx_serial_init_ports
- *
- * initialise the serial ports from the machine provided initialisation
- * data.
-*/
-
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info)
-{
-	struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
-	struct platform_device **platdev_ptr;
-	int i;
-
-	dbg("s3c24xx_serial_init_ports: initialising ports...\n");
-
-	platdev_ptr = s3c24xx_uart_devs;
-
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
-		s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
-	}
-
-	return 0;
-}
-
 static int __init
 s3c24xx_serial_console_setup(struct console *co, char *options)
 {
@@ -1526,11 +1440,6 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-/* s3c24xx_serial_initconsole
- *
- * initialise the console from one of the uart drivers
-*/
-
 static struct console s3c24xx_serial_console = {
 	.name		= S3C24XX_SERIAL_NAME,
 	.device		= uart_console_device,
@@ -1540,34 +1449,250 @@ static struct console s3c24xx_serial_console = {
 	.setup		= s3c24xx_serial_console_setup,
 	.data		= &s3c24xx_uart_drv,
 };
+#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
 
-int s3c24xx_serial_initconsole(struct platform_driver *drv,
-			       struct s3c24xx_uart_info **info)
+#ifdef CONFIG_CPU_S3C2410
+static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung S3C2410 UART",
+		.type		= PORT_S3C2410,
+		.fifosize	= 16,
+		.rx_fifomask	= S3C2410_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2410_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2410_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2410_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2410_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2410_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 2,
+		.clksel_mask	= S3C2410_UCON_CLKMASK,
+		.clksel_shift	= S3C2410_UCON_CLKSHIFT,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data)
+#else
+#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
 
-{
-	struct platform_device *dev = s3c24xx_uart_devs[0];
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung S3C2412 UART",
+		.type		= PORT_S3C2412,
+		.fifosize	= 64,
+		.has_divslot	= 1,
+		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL2,
+		.num_clks	= 4,
+		.clksel_mask	= S3C2412_UCON_CLKMASK,
+		.clksel_shift	= S3C2412_UCON_CLKSHIFT,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data)
+#else
+#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
 
-	dbg("s3c24xx_serial_initconsole\n");
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
+	defined(CONFIG_CPU_S3C2443)
+static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung S3C2440 UART",
+		.type		= PORT_S3C2440,
+		.fifosize	= 64,
+		.has_divslot	= 1,
+		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL2,
+		.num_clks	= 4,
+		.clksel_mask	= S3C2412_UCON_CLKMASK,
+		.clksel_shift	= S3C2412_UCON_CLKSHIFT,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data)
+#else
+#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
 
-	/* select driver based on the cpu */
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) || \
+	defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) || \
+	defined(CONFIG_CPU_S5PC100)
+static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung S3C6400 UART",
+		.type		= PORT_S3C6400,
+		.fifosize	= 64,
+		.has_divslot	= 1,
+		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL2,
+		.num_clks	= 4,
+		.clksel_mask	= S3C6400_UCON_CLKMASK,
+		.clksel_shift	= S3C6400_UCON_CLKSHIFT,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
+#else
+#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
 
-	if (dev == NULL) {
-		printk(KERN_ERR "s3c24xx: no devices for console init\n");
-		return 0;
-	}
+#ifdef CONFIG_CPU_S5PV210
+static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung S5PV210 UART",
+		.type		= PORT_S3C6400,
+		.has_divslot	= 1,
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 2,
+		.clksel_mask	= S5PV210_UCON_CLKMASK,
+		.clksel_shift	= S5PV210_UCON_CLKSHIFT,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	.fifosize = { 256, 64, 16, 16 },
+};
+#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
+#else
+#define S5PV210_SERIAL_DRV_DATA	(kernel_ulong_t)NULL
+#endif
 
-	if (strcmp(dev->name, drv->driver.name) != 0)
-		return 0;
+#ifdef CONFIG_CPU_EXYNOS4210
+static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung Exynos4 UART",
+		.type		= PORT_S3C6400,
+		.has_divslot	= 1,
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 1,
+		.clksel_mask	= 0,
+		.clksel_shift	= 0,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.has_fracval	= 1,
+	},
+	.fifosize = { 256, 64, 16, 16 },
+};
+#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
+#else
+#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
 
-	s3c24xx_serial_console.data = &s3c24xx_uart_drv;
-	s3c24xx_serial_init_ports(info);
+static struct platform_device_id s3c24xx_serial_driver_ids[] = {
+	{
+		.name		= "s3c2410-uart",
+		.driver_data	= S3C2410_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s3c2412-uart",
+		.driver_data	= S3C2412_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s3c2440-uart",
+		.driver_data	= S3C2440_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s3c6400-uart",
+		.driver_data	= S3C6400_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s5pv210-uart",
+		.driver_data	= S5PV210_SERIAL_DRV_DATA,
+	}, {
+		.name		= "exynos4210-uart",
+		.driver_data	= EXYNOS4210_SERIAL_DRV_DATA,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
 
-	register_console(&s3c24xx_serial_console);
-	return 0;
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_uart_dt_match[] = {
+	{ .compatible = "samsung,exynos4210-uart",
+		.data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
+#else
+#define s3c24xx_uart_dt_match NULL
+#endif
+
+static struct platform_driver samsung_serial_driver = {
+	.probe		= s3c24xx_serial_probe,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
+	.id_table	= s3c24xx_serial_driver_ids,
+	.driver		= {
+		.name	= "samsung-uart",
+		.owner	= THIS_MODULE,
+		.pm	= SERIAL_SAMSUNG_PM_OPS,
+		.of_match_table	= s3c24xx_uart_dt_match,
+	},
+};
+
+/* module initialisation code */
+
+static int __init s3c24xx_serial_modinit(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&s3c24xx_uart_drv);
+	if (ret < 0) {
+		printk(KERN_ERR "failed to register UART driver\n");
+		return -1;
+	}
+
+	return platform_driver_register(&samsung_serial_driver);
 }
 
-#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
+static void __exit s3c24xx_serial_modexit(void)
+{
+	uart_unregister_driver(&s3c24xx_uart_drv);
+}
+
+module_init(s3c24xx_serial_modinit);
+module_exit(s3c24xx_serial_modexit);
 
+MODULE_ALIAS("platform:samsung-uart");
 MODULE_DESCRIPTION("Samsung SoC Serial port driver");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index 8e87b788e5c6..1a4bca3e4179 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -19,20 +19,25 @@ struct s3c24xx_uart_info {
 	unsigned long		tx_fifomask;
 	unsigned long		tx_fifoshift;
 	unsigned long		tx_fifofull;
+	unsigned int		def_clk_sel;
+	unsigned long		num_clks;
+	unsigned long		clksel_mask;
+	unsigned long		clksel_shift;
 
 	/* uart port features */
 
 	unsigned int		has_divslot:1;
 
-	/* clock source control */
-
-	int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-	int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-
 	/* uart controls */
 	int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
 };
 
+struct s3c24xx_serial_drv_data {
+	struct s3c24xx_uart_info	*info;
+	struct s3c2410_uartcfg		*def_cfg;
+	unsigned int			fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
+};
+
 struct s3c24xx_uart_port {
 	unsigned char			rx_claimed;
 	unsigned char			tx_claimed;
@@ -43,10 +48,13 @@ struct s3c24xx_uart_port {
 	unsigned int			tx_irq;
 
 	struct s3c24xx_uart_info	*info;
-	struct s3c24xx_uart_clksrc	*clksrc;
 	struct clk			*clk;
 	struct clk			*baudclk;
 	struct uart_port		port;
+	struct s3c24xx_serial_drv_data	*drv_data;
+
+	/* reference to platform data */
+	struct s3c2410_uartcfg		*cfg;
 
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block		freq_transition;
@@ -56,7 +64,6 @@ struct s3c24xx_uart_port {
 /* conversion functions */
 
 #define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
-#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
 
 /* register access controls */
 
@@ -69,17 +76,6 @@ struct s3c24xx_uart_port {
 #define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
 #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
 
-extern int s3c24xx_serial_probe(struct platform_device *dev,
-				struct s3c24xx_uart_info *uart);
-
-extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
-
-extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
-				      struct s3c24xx_uart_info **uart);
-
-extern int s3c24xx_serial_init(struct platform_driver *drv,
-			       struct s3c24xx_uart_info *info);
-
 #ifdef CONFIG_SERIAL_SAMSUNG_DEBUG
 
 extern void printascii(const char *);
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index db9d1b4bfbdc..dbc7fe8ca9e7 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -21,7 +21,12 @@
 #include <linux/platform_data/tegra_usb.h>
 #include <linux/irq.h>
 #include <linux/usb/otg.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
 #include <mach/usb_phy.h>
+#include <mach/iomap.h>
 
 #define TEGRA_USB_DMA_ALIGN 32
 
@@ -574,6 +579,35 @@ static const struct hc_driver tegra_ehci_hc_driver = {
 	.port_handed_over	= ehci_port_handed_over,
 };
 
+static int setup_vbus_gpio(struct platform_device *pdev)
+{
+	int err = 0;
+	int gpio;
+
+	if (!pdev->dev.of_node)
+		return 0;
+
+	gpio = of_get_named_gpio(pdev->dev.of_node, "nvidia,vbus-gpio", 0);
+	if (!gpio_is_valid(gpio))
+		return 0;
+
+	err = gpio_request(gpio, "vbus_gpio");
+	if (err) {
+		dev_err(&pdev->dev, "can't request vbus gpio %d", gpio);
+		return err;
+	}
+	err = gpio_direction_output(gpio, 1);
+	if (err) {
+		dev_err(&pdev->dev, "can't enable vbus\n");
+		return err;
+	}
+	gpio_set_value(gpio, 1);
+
+	return err;
+}
+
+static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
+
 static int tegra_ehci_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -590,6 +624,15 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	/* Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &tegra_ehci_dma_mask;
+
+	setup_vbus_gpio(pdev);
+
 	tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL);
 	if (!tegra)
 		return -ENOMEM;
@@ -640,6 +683,28 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 		goto fail_io;
 	}
 
+	/* This is pretty ugly and needs to be fixed when we do only
+	 * device-tree probing. Old code relies on the platform_device
+	 * numbering that we lack for device-tree-instantiated devices.
+	 */
+	if (instance < 0) {
+		switch (res->start) {
+		case TEGRA_USB_BASE:
+			instance = 0;
+			break;
+		case TEGRA_USB2_BASE:
+			instance = 1;
+			break;
+		case TEGRA_USB3_BASE:
+			instance = 2;
+			break;
+		default:
+			err = -ENODEV;
+			dev_err(&pdev->dev, "unknown usb instance\n");
+			goto fail_phy;
+		}
+	}
+
 	tegra->phy = tegra_usb_phy_open(instance, hcd->regs, pdata->phy_config,
 						TEGRA_USB_PHY_MODE_HOST);
 	if (IS_ERR(tegra->phy)) {
@@ -773,6 +838,11 @@ static void tegra_ehci_hcd_shutdown(struct platform_device *pdev)
 		hcd->driver->shutdown(hcd);
 }
 
+static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
+	{ .compatible = "nvidia,tegra20-ehci", },
+	{ },
+};
+
 static struct platform_driver tegra_ehci_driver = {
 	.probe		= tegra_ehci_probe,
 	.remove		= tegra_ehci_remove,
@@ -783,5 +853,6 @@ static struct platform_driver tegra_ehci_driver = {
 	.shutdown	= tegra_ehci_hcd_shutdown,
 	.driver		= {
 		.name	= "tegra-ehci",
+		.of_match_table = tegra_ehci_of_match,
 	}
 };