Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6 into merge

1 files changed, 30 insertions, 10 deletions

diff --git a/firmware/Makefile b/firmware/Makefile
index 16664894966d..142c17ab9e57 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,15 +32,26 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
 					 adaptec/starfire_tx.bin
 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
+			     bnx2/bnx2-rv2p-09-4.6.15.fw \
+			     bnx2/bnx2-mips-06-4.6.16.fw \
+			     bnx2/bnx2-rv2p-06-4.6.16.fw
 fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
 fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
 fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
 				   cxgb3/t3c_psram-1.1.0.bin \
 				   cxgb3/t3fw-7.1.0.bin
+fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
 fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
 fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
 			     e100/d102e_ucode.bin
+fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
 fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
+fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
+				      advansys/3550.bin advansys/38C0800.bin
+fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
+					 qlogic/12160.bin
+fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
 fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
 fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
 fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
@@ -49,14 +60,9 @@ fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
 				     sb16/ima_adpcm_init.csp \
 				     sb16/ima_adpcm_playback.csp \
 				     sb16/ima_adpcm_capture.csp
-fw-shipped-$(CONFIG_SLICOSS) += slicoss/gbdownload.sys slicoss/gbrcvucode.sys \
-				slicoss/oasisdbgdownload.sys \
-				slicoss/oasisdownload.sys \
-				slicoss/oasisrcvucode.sys
-fw-shipped-$(CONFIG_SXG) += sxg/saharadownloadB.sys \
-				sxg/saharadbgdownloadB.sys
 fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
 				   yamaha/ds1e_ctrl.fw
+fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin
 fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
 fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
 			       tigon/tg3_tso5.bin
@@ -113,10 +119,10 @@ quiet_cmd_ihex  = IHEX    $@
       cmd_ihex  = $(OBJCOPY) -Iihex -Obinary $< $@
 
 quiet_cmd_ihex2fw  = IHEX2FW $@
-      cmd_ihex2fw  = $(objtree)/scripts/ihex2fw $< $@
+      cmd_ihex2fw  = $(objtree)/$(obj)/ihex2fw $< $@
 
 quiet_cmd_h16tofw  = H16TOFW $@
-      cmd_h16tofw  = $(objtree)/scripts/ihex2fw -w $< $@
+      cmd_h16tofw  = $(objtree)/$(obj)/ihex2fw -w $< $@
 
 quiet_cmd_fwbin = MK_FW   $@
       cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)";		     \
@@ -175,15 +181,27 @@ $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex)
 
+# Don't depend on ihex2fw if we're installing and it already exists.
+# Putting it after | in the dependencies doesn't seem sufficient when
+# we're installing after a cross-compile, because ihex2fw has dependencies
+# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and 
+# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
+# is exported read-only for someone to run 'make install'.
+ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
+ihex2fw_dep :=
+else
+ihex2fw_dep := $(obj)/ihex2fw
+endif
+
 # .HEX is also Intel HEX, but where the offset and length in each record
 # is actually meaningful, because the firmware has to be loaded in a certain
 # order rather than as a single binary blob. Thus, we convert them into our
 # more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX  | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex2fw)
 
 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,h16tofw)
 
 $(firmware-dirs):
@@ -200,3 +218,5 @@ targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
 # Without this, built-in.o won't be created when it's empty, and the
 # final vmlinux link will fail.
 obj-n := dummy
+
+hostprogs-y := ihex2fw