btrfs: scrub: introduce dedicated helper to scrub simple-stripe based range

The new entrance will iterate through each data stripe which belongs to
the target device.

And since inside each data stripe, RAID0 is just SINGLE, while RAID10 is
just RAID1, we can reuse scrub_simple_mirror() to do the scrub properly.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

1 files changed, 88 insertions, 12 deletions

diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index 323449c77148..b63e9219dd14 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -2985,6 +2985,15 @@ static void get_extent_info(struct btrfs_path *path, u64 *extent_start_ret,
 	*generation_ret = btrfs_extent_generation(path->nodes[0], ei);
 }
 
+static bool does_range_cross_boundary(u64 extent_start, u64 extent_len,
+				      u64 boundary_start, u64 boudary_len)
+{
+	return (extent_start < boundary_start &&
+		extent_start + extent_len > boundary_start) ||
+	       (extent_start < boundary_start + boudary_len &&
+		extent_start + extent_len > boundary_start + boudary_len);
+}
+
 static noinline_for_stack int scrub_raid56_parity(struct scrub_ctx *sctx,
 						  struct map_lookup *map,
 						  struct btrfs_device *sdev,
@@ -3268,15 +3277,6 @@ static int sync_write_pointer_for_zoned(struct scrub_ctx *sctx, u64 logical,
 	return ret;
 }
 
-static bool does_range_cross_boundary(u64 extent_start, u64 extent_len,
-				      u64 boundary_start, u64 boudary_len)
-{
-	return (extent_start < boundary_start &&
-		extent_start + extent_len > boundary_start) ||
-	       (extent_start < boundary_start + boudary_len &&
-		extent_start + extent_len > boundary_start + boudary_len);
-}
-
 /*
  * Scrub one range which can only has simple mirror based profile.
  * (Including all range in SINGLE/DUP/RAID1/RAID1C*, and each stripe in
@@ -3413,6 +3413,77 @@ static int scrub_simple_mirror(struct scrub_ctx *sctx,
 	return ret;
 }
 
+/* Calculate the full stripe length for simple stripe based profiles */
+static u64 simple_stripe_full_stripe_len(const struct map_lookup *map)
+{
+	ASSERT(map->type & (BTRFS_BLOCK_GROUP_RAID0 |
+			    BTRFS_BLOCK_GROUP_RAID10));
+
+	return map->num_stripes / map->sub_stripes * map->stripe_len;
+}
+
+/* Get the logical bytenr for the stripe */
+static u64 simple_stripe_get_logical(struct map_lookup *map,
+				     struct btrfs_block_group *bg,
+				     int stripe_index)
+{
+	ASSERT(map->type & (BTRFS_BLOCK_GROUP_RAID0 |
+			    BTRFS_BLOCK_GROUP_RAID10));
+	ASSERT(stripe_index < map->num_stripes);
+
+	/*
+	 * (stripe_index / sub_stripes) gives how many data stripes we need to
+	 * skip.
+	 */
+	return (stripe_index / map->sub_stripes) * map->stripe_len + bg->start;
+}
+
+/* Get the mirror number for the stripe */
+static int simple_stripe_mirror_num(struct map_lookup *map, int stripe_index)
+{
+	ASSERT(map->type & (BTRFS_BLOCK_GROUP_RAID0 |
+			    BTRFS_BLOCK_GROUP_RAID10));
+	ASSERT(stripe_index < map->num_stripes);
+
+	/* For RAID0, it's fixed to 1, for RAID10 it's 0,1,0,1... */
+	return stripe_index % map->sub_stripes + 1;
+}
+
+static int scrub_simple_stripe(struct scrub_ctx *sctx,
+			       struct btrfs_root *extent_root,
+			       struct btrfs_root *csum_root,
+			       struct btrfs_block_group *bg,
+			       struct map_lookup *map,
+			       struct btrfs_device *device,
+			       int stripe_index)
+{
+	const u64 logical_increment = simple_stripe_full_stripe_len(map);
+	const u64 orig_logical = simple_stripe_get_logical(map, bg, stripe_index);
+	const u64 orig_physical = map->stripes[stripe_index].physical;
+	const int mirror_num = simple_stripe_mirror_num(map, stripe_index);
+	u64 cur_logical = orig_logical;
+	u64 cur_physical = orig_physical;
+	int ret = 0;
+
+	while (cur_logical < bg->start + bg->length) {
+		/*
+		 * Inside each stripe, RAID0 is just SINGLE, and RAID10 is
+		 * just RAID1, so we can reuse scrub_simple_mirror() to scrub
+		 * this stripe.
+		 */
+		ret = scrub_simple_mirror(sctx, extent_root, csum_root, bg, map,
+					  cur_logical, map->stripe_len, device,
+					  cur_physical, mirror_num);
+		if (ret)
+			return ret;
+		/* Skip to next stripe which belongs to the target device */
+		cur_logical += logical_increment;
+		/* For physical offset, we just go to next stripe */
+		cur_physical += map->stripe_len;
+	}
+	return ret;
+}
+
 static noinline_for_stack int scrub_stripe(struct scrub_ctx *sctx,
 					   struct btrfs_block_group *bg,
 					   struct map_lookup *map,
@@ -3541,9 +3612,14 @@ static noinline_for_stack int scrub_stripe(struct scrub_ctx *sctx,
 				stripe_index + 1);
 		goto out;
 	}
-	/*
-	 * now find all extents for each stripe and scrub them
-	 */
+	if (profile & (BTRFS_BLOCK_GROUP_RAID0 | BTRFS_BLOCK_GROUP_RAID10)) {
+		ret = scrub_simple_stripe(sctx, root, csum_root, bg, map,
+					  scrub_dev, stripe_index);
+		goto out;
+	}
+
+	/* Only RAID56 goes through the old code */
+	ASSERT(map->type & BTRFS_BLOCK_GROUP_RAID56_MASK);
 	ret = 0;
 	while (physical < physical_end) {
 		/*