aboutsummaryrefslogtreecommitdiff
path: root/fs/btrfs
diff options
context:
space:
mode:
authorHans van Kranenburg2018-02-05 17:45:11 +0100
committerDavid Sterba2018-03-01 16:16:47 +0100
commit92e222df7b8f05c565009c7383321b593eca488b (patch)
treee67aeb6f2d67ac36e74e965fa0325ce7baf34c15 /fs/btrfs
parent765f3cebff0023d05d724374db8b63c01e07c499 (diff)
btrfs: alloc_chunk: fix DUP stripe size handling
In case of using DUP, we search for enough unallocated disk space on a device to hold two stripes. The devices_info[ndevs-1].max_avail that holds the amount of unallocated space found is directly assigned to stripe_size, while it's actually twice the stripe size. Later on in the code, an unconditional division of stripe_size by dev_stripes corrects the value, but in the meantime there's a check to see if the stripe_size does not exceed max_chunk_size. Since during this check stripe_size is twice the amount as intended, the check will reduce the stripe_size to max_chunk_size if the actual correct to be used stripe_size is more than half the amount of max_chunk_size. The unconditional division later tries to correct stripe_size, but will actually make sure we can't allocate more than half the max_chunk_size. Fix this by moving the division by dev_stripes before the max chunk size check, so it always contains the right value, instead of putting a duct tape division in further on to get it fixed again. Since in all other cases than DUP, dev_stripes is 1, this change only affects DUP. Other attempts in the past were made to fix this: * 37db63a400 "Btrfs: fix max chunk size check in chunk allocator" tried to fix the same problem, but still resulted in part of the code acting on a wrongly doubled stripe_size value. * 86db25785a "Btrfs: fix max chunk size on raid5/6" unintentionally broke this fix again. The real problem was already introduced with the rest of the code in 73c5de0051. The user visible result however will be that the max chunk size for DUP will suddenly double, while it's actually acting according to the limits in the code again like it was 5 years ago. Reported-by: Naohiro Aota <naohiro.aota@wdc.com> Link: https://www.spinics.net/lists/linux-btrfs/msg69752.html Fixes: 73c5de0051 ("btrfs: quasi-round-robin for chunk allocation") Fixes: 86db25785a ("Btrfs: fix max chunk size on raid5/6") Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update comment ] Signed-off-by: David Sterba <dsterba@suse.com>
Diffstat (limited to 'fs/btrfs')
-rw-r--r--fs/btrfs/volumes.c11
1 files changed, 6 insertions, 5 deletions
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 2ceb924ca0d6..b2d05c6b1c56 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -4829,10 +4829,13 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans,
ndevs = min(ndevs, devs_max);
/*
- * the primary goal is to maximize the number of stripes, so use as many
- * devices as possible, even if the stripes are not maximum sized.
+ * The primary goal is to maximize the number of stripes, so use as
+ * many devices as possible, even if the stripes are not maximum sized.
+ *
+ * The DUP profile stores more than one stripe per device, the
+ * max_avail is the total size so we have to adjust.
*/
- stripe_size = devices_info[ndevs-1].max_avail;
+ stripe_size = div_u64(devices_info[ndevs - 1].max_avail, dev_stripes);
num_stripes = ndevs * dev_stripes;
/*
@@ -4867,8 +4870,6 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans,
stripe_size = devices_info[ndevs-1].max_avail;
}
- stripe_size = div_u64(stripe_size, dev_stripes);
-
/* align to BTRFS_STRIPE_LEN */
stripe_size = round_down(stripe_size, BTRFS_STRIPE_LEN);