diff options
author | npiggin@suse.de | 2010-05-27 01:05:34 +1000 |
---|---|---|
committer | Al Viro | 2010-05-27 22:15:42 -0400 |
commit | 15c6fd9786dfaab43547bf60df6fa63170fb64fc (patch) | |
tree | afd997b3402761e28b6c39f414fbd93c69fdcdce /fs | |
parent | 7bb46a6734a7e1ad4beaecc11cae7ed3ff81d30f (diff) |
kill spurious reference to vmtruncate
Lots of filesystems calls vmtruncate despite not implementing the old
->truncate method. Switch them to use simple_setsize and add some
comments about the truncate code where it seems fitting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Diffstat (limited to 'fs')
-rw-r--r-- | fs/adfs/inode.c | 3 | ||||
-rw-r--r-- | fs/ecryptfs/inode.c | 4 | ||||
-rw-r--r-- | fs/gfs2/aops.c | 8 | ||||
-rw-r--r-- | fs/gfs2/ops_inode.c | 5 | ||||
-rw-r--r-- | fs/jffs2/fs.c | 4 | ||||
-rw-r--r-- | fs/ocfs2/file.c | 8 | ||||
-rw-r--r-- | fs/smbfs/inode.c | 2 | ||||
-rw-r--r-- | fs/ubifs/file.c | 13 | ||||
-rw-r--r-- | fs/ubifs/ubifs.h | 2 | ||||
-rw-r--r-- | fs/ufs/truncate.c | 10 |
10 files changed, 37 insertions, 22 deletions
diff --git a/fs/adfs/inode.c b/fs/adfs/inode.c index 0f5e30978135..6f850b06ab62 100644 --- a/fs/adfs/inode.c +++ b/fs/adfs/inode.c @@ -322,8 +322,9 @@ adfs_notify_change(struct dentry *dentry, struct iattr *attr) if (error) goto out; + /* XXX: this is missing some actual on-disk truncation.. */ if (ia_valid & ATTR_SIZE) - error = vmtruncate(inode, attr->ia_size); + error = simple_setsize(inode, attr->ia_size); if (error) goto out; diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 65dee2f336ae..31ef5252f0fe 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -805,7 +805,7 @@ static int truncate_upper(struct dentry *dentry, struct iattr *ia, - (ia->ia_size & ~PAGE_CACHE_MASK)); if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) { - rc = vmtruncate(inode, ia->ia_size); + rc = simple_setsize(inode, ia->ia_size); if (rc) goto out; lower_ia->ia_size = ia->ia_size; @@ -830,7 +830,7 @@ static int truncate_upper(struct dentry *dentry, struct iattr *ia, goto out; } } - vmtruncate(inode, ia->ia_size); + simple_setsize(inode, ia->ia_size); rc = ecryptfs_write_inode_size_to_metadata(inode); if (rc) { printk(KERN_ERR "Problem with " diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c index a739a0a48067..9f8b52500d63 100644 --- a/fs/gfs2/aops.c +++ b/fs/gfs2/aops.c @@ -700,8 +700,14 @@ out: return 0; page_cache_release(page); + + /* + * XXX(hch): the call below should probably be replaced with + * a call to the gfs2-specific truncate blocks helper to actually + * release disk blocks.. + */ if (pos + len > ip->i_inode.i_size) - vmtruncate(&ip->i_inode, ip->i_inode.i_size); + simple_setsize(&ip->i_inode, ip->i_inode.i_size); out_endtrans: gfs2_trans_end(sdp); out_trans_fail: diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c index 4e64352d49de..98cdd05f3316 100644 --- a/fs/gfs2/ops_inode.c +++ b/fs/gfs2/ops_inode.c @@ -1071,6 +1071,9 @@ int gfs2_permission(struct inode *inode, int mask) return error; } +/* + * XXX: should be changed to have proper ordering by opencoding simple_setsize + */ static int setattr_size(struct inode *inode, struct iattr *attr) { struct gfs2_inode *ip = GFS2_I(inode); @@ -1081,7 +1084,7 @@ static int setattr_size(struct inode *inode, struct iattr *attr) error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks); if (error) return error; - error = vmtruncate(inode, attr->ia_size); + error = simple_setsize(inode, attr->ia_size); gfs2_trans_end(sdp); if (error) return error; diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c index 86e0821fc989..8bc2c80ab159 100644 --- a/fs/jffs2/fs.c +++ b/fs/jffs2/fs.c @@ -169,13 +169,13 @@ int jffs2_do_setattr (struct inode *inode, struct iattr *iattr) mutex_unlock(&f->sem); jffs2_complete_reservation(c); - /* We have to do the vmtruncate() without f->sem held, since + /* We have to do the simple_setsize() without f->sem held, since some pages may be locked and waiting for it in readpage(). We are protected from a simultaneous write() extending i_size back past iattr->ia_size, because do_truncate() holds the generic inode semaphore. */ if (ivalid & ATTR_SIZE && inode->i_size > iattr->ia_size) { - vmtruncate(inode, iattr->ia_size); + simple_setsize(inode, iattr->ia_size); inode->i_blocks = (inode->i_size + 511) >> 9; } diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 1c6220a8e072..6a13ea64c447 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1052,7 +1052,7 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr) } /* - * This will intentionally not wind up calling vmtruncate(), + * This will intentionally not wind up calling simple_setsize(), * since all the work for a size change has been done above. * Otherwise, we could get into problems with truncate as * ip_alloc_sem is used there to protect against i_size @@ -2118,9 +2118,13 @@ relock: * direct write may have instantiated a few * blocks outside i_size. Trim these off again. * Don't need i_size_read because we hold i_mutex. + * + * XXX(hch): this looks buggy because ocfs2 did not + * actually implement ->truncate. Take a look at + * the new truncate sequence and update this accordingly */ if (*ppos + count > inode->i_size) - vmtruncate(inode, inode->i_size); + simple_setsize(inode, inode->i_size); ret = written; goto out_dio; } diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c index dfa1d67f8fca..9551cb6f7fe4 100644 --- a/fs/smbfs/inode.c +++ b/fs/smbfs/inode.c @@ -714,7 +714,7 @@ smb_notify_change(struct dentry *dentry, struct iattr *attr) error = server->ops->truncate(inode, attr->ia_size); if (error) goto out; - error = vmtruncate(inode, attr->ia_size); + error = simple_setsize(inode, attr->ia_size); if (error) goto out; refresh = 1; diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c index c726da68e6be..12f445cee9f7 100644 --- a/fs/ubifs/file.c +++ b/fs/ubifs/file.c @@ -967,12 +967,15 @@ static int do_writepage(struct page *page, int len) * the page locked, and it locks @ui_mutex. However, write-back does take inode * @i_mutex, which means other VFS operations may be run on this inode at the * same time. And the problematic one is truncation to smaller size, from where - * we have to call 'vmtruncate()', which first changes @inode->i_size, then + * we have to call 'simple_setsize()', which first changes @inode->i_size, then * drops the truncated pages. And while dropping the pages, it takes the page - * lock. This means that 'do_truncation()' cannot call 'vmtruncate()' with + * lock. This means that 'do_truncation()' cannot call 'simple_setsize()' with * @ui_mutex locked, because it would deadlock with 'ubifs_writepage()'. This * means that @inode->i_size is changed while @ui_mutex is unlocked. * + * XXX: with the new truncate the above is not true anymore, the simple_setsize + * calls can be replaced with the individual components. + * * But in 'ubifs_writepage()' we have to guarantee that we do not write beyond * inode size. How do we do this if @inode->i_size may became smaller while we * are in the middle of 'ubifs_writepage()'? The UBIFS solution is the @@ -1125,7 +1128,7 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode, budgeted = 0; } - err = vmtruncate(inode, new_size); + err = simple_setsize(inode, new_size); if (err) goto out_budg; @@ -1214,7 +1217,7 @@ static int do_setattr(struct ubifs_info *c, struct inode *inode, if (attr->ia_valid & ATTR_SIZE) { dbg_gen("size %lld -> %lld", inode->i_size, new_size); - err = vmtruncate(inode, new_size); + err = simple_setsize(inode, new_size); if (err) goto out; } @@ -1223,7 +1226,7 @@ static int do_setattr(struct ubifs_info *c, struct inode *inode, if (attr->ia_valid & ATTR_SIZE) { /* Truncation changes inode [mc]time */ inode->i_mtime = inode->i_ctime = ubifs_current_time(inode); - /* 'vmtruncate()' changed @i_size, update @ui_size */ + /* 'simple_setsize()' changed @i_size, update @ui_size */ ui->ui_size = inode->i_size; } diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index b0904536cc1c..2eef553d50c8 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -379,7 +379,7 @@ struct ubifs_gced_idx_leb { * The @ui_size is a "shadow" variable for @inode->i_size and UBIFS uses * @ui_size instead of @inode->i_size. The reason for this is that UBIFS cannot * make sure @inode->i_size is always changed under @ui_mutex, because it - * cannot call 'vmtruncate()' with @ui_mutex locked, because it would deadlock + * cannot call 'simple_setsize()' with @ui_mutex locked, because it would deadlock * with 'ubifs_writepage()' (see file.c). All the other inode fields are * changed under @ui_mutex, so they do not need "shadow" fields. Note, one * could consider to rework locking and base it on "shadow" fields. diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c index f294c44577dc..3733057e7833 100644 --- a/fs/ufs/truncate.c +++ b/fs/ufs/truncate.c @@ -501,12 +501,10 @@ out: return err; } - /* - * We don't define our `inode->i_op->truncate', and call it here, - * because of: - * - there is no way to know old size - * - there is no way inform user about error, if it happens in `truncate' + * TODO: + * - truncate case should use proper ordering instead of using + * simple_setsize */ int ufs_setattr(struct dentry *dentry, struct iattr *attr) { @@ -530,7 +528,7 @@ int ufs_setattr(struct dentry *dentry, struct iattr *attr) if (ia_valid & ATTR_SIZE && attr->ia_size != inode->i_size) { loff_t old_i_size = inode->i_size; - error = vmtruncate(inode, attr->ia_size); + error = simple_setsize(inode, attr->ia_size); if (error) return error; error = ufs_truncate(inode, old_i_size); |