Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (49 commits)
  MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irq
  MIPS: Move ptrace prototypes to ptrace.h
  MIPS: Ptrace support for HARDWARE_WATCHPOINTS
  MIPS: Scheduler support for HARDWARE_WATCHPOINTS.
  MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.
  MIPS: Probe watch registers and report configuration.
  MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
  MIPS: Add HARDWARE_WATCHPOINTS configure option.
  MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.
  MIPS: TXx9: Add TX4939 ATA support (v2)
  MIPS: Rewrite spinlocks to ticket locks.
  MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment.
  MIPS: IP checksums: Remove unncessary .set pseudos
  MIPS: IP checksums: Remove unncessary folding of sum to 16 bit.
  MIPS: Move headfiles to new location below arch/mips/include
  MIPS: Alchemy: rename directory
  MIPS: Optimize get_user and put_user for 64-bit
  MIPS: TXx9: Implement prom_free_prom_memory
  MIPS: TXx9: Add RBTX4939 board support
  MIPS: TXx9: Add TX4939 SoC support
  ...

1 files changed, 0 insertions, 430 deletions

diff --git a/include/asm-mips/sn/addrs.h b/include/asm-mips/sn/addrs.h
deleted file mode 100644
index fec9bdd34913..000000000000
--- a/include/asm-mips/sn/addrs.h
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
- * Copyright (C) 1999, 2000 by Ralf Baechle
- */
-#ifndef _ASM_SN_ADDRS_H
-#define _ASM_SN_ADDRS_H
-
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#endif /* !__ASSEMBLY__ */
-
-#include <asm/addrspace.h>
-#include <asm/sn/kldir.h>
-
-#if defined(CONFIG_SGI_IP27)
-#include <asm/sn/sn0/addrs.h>
-#elif defined(CONFIG_SGI_IP35)
-#include <asm/sn/sn1/addrs.h>
-#endif
-
-
-#ifndef __ASSEMBLY__
-
-#define PS_UINT_CAST		(unsigned long)
-#define UINT64_CAST		(unsigned long)
-
-#define HUBREG_CAST		(volatile hubreg_t *)
-
-#else /* __ASSEMBLY__ */
-
-#define PS_UINT_CAST
-#define UINT64_CAST
-#define HUBREG_CAST
-
-#endif /* __ASSEMBLY__ */
-
-
-#define NASID_GET_META(_n)	((_n) >> NASID_LOCAL_BITS)
-#ifdef CONFIG_SGI_IP27
-#define NASID_GET_LOCAL(_n)	((_n) & 0xf)
-#endif
-#define NASID_MAKE(_m, _l)	(((_m) << NASID_LOCAL_BITS) | (_l))
-
-#define NODE_ADDRSPACE_MASK	(NODE_ADDRSPACE_SIZE - 1)
-#define TO_NODE_ADDRSPACE(_pa)	(UINT64_CAST (_pa) & NODE_ADDRSPACE_MASK)
-
-#define CHANGE_ADDR_NASID(_pa, _nasid)	\
-		((UINT64_CAST(_pa) & ~NASID_MASK) | \
-		 (UINT64_CAST(_nasid) <<  NASID_SHFT))
-
-
-/*
- * The following macros are used to index to the beginning of a specific
- * node's address space.
- */
-
-#define NODE_OFFSET(_n)		(UINT64_CAST (_n) << NODE_SIZE_BITS)
-
-#define NODE_CAC_BASE(_n)	(CAC_BASE   + NODE_OFFSET(_n))
-#define NODE_HSPEC_BASE(_n)	(HSPEC_BASE + NODE_OFFSET(_n))
-#define NODE_IO_BASE(_n)	(IO_BASE    + NODE_OFFSET(_n))
-#define NODE_MSPEC_BASE(_n)	(MSPEC_BASE + NODE_OFFSET(_n))
-#define NODE_UNCAC_BASE(_n)	(UNCAC_BASE + NODE_OFFSET(_n))
-
-#define TO_NODE(_n, _x)		(NODE_OFFSET(_n)     | ((_x)		   ))
-#define TO_NODE_CAC(_n, _x)	(NODE_CAC_BASE(_n)   | ((_x) & TO_PHYS_MASK))
-#define TO_NODE_UNCAC(_n, _x)	(NODE_UNCAC_BASE(_n) | ((_x) & TO_PHYS_MASK))
-#define TO_NODE_MSPEC(_n, _x)	(NODE_MSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK))
-#define TO_NODE_HSPEC(_n, _x)	(NODE_HSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK))
-
-
-#define RAW_NODE_SWIN_BASE(nasid, widget)				\
-	(NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS))
-
-#define WIDGETID_GET(addr)	((unsigned char)((addr >> SWIN_SIZE_BITS) & 0xff))
-
-/*
- * The following definitions pertain to the IO special address
- * space.  They define the location of the big and little windows
- * of any given node.
- */
-
-#define SWIN_SIZE_BITS		24
-#define SWIN_SIZE		(UINT64_CAST 1 << 24)
-#define	SWIN_SIZEMASK		(SWIN_SIZE - 1)
-#define	SWIN_WIDGET_MASK	0xF
-
-/*
- * Convert smallwindow address to xtalk address.
- *
- * 'addr' can be physical or virtual address, but will be converted
- * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
- */
-#define	SWIN_WIDGETADDR(addr)	((addr) & SWIN_SIZEMASK)
-#define	SWIN_WIDGETNUM(addr)	(((addr)  >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
-/*
- * Verify if addr belongs to small window address on node with "nasid"
- *
- *
- * NOTE: "addr" is expected to be XKPHYS address, and NOT physical
- * address
- *
- *
- */
-#define	NODE_SWIN_ADDR(nasid, addr)	\
-		(((addr) >= NODE_SWIN_BASE(nasid, 0))  && \
-		 ((addr) <  (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\
-		 ))
-
-/*
- * The following define the major position-independent aliases used
- * in SN.
- *	UALIAS -- 256MB in size, reads in the UALIAS result in
- *			uncached references to the memory of the reader's node.
- *	CPU_UALIAS -- 128kb in size, the bottom part of UALIAS is flipped
- *			depending on which CPU does the access to provide
- *			all CPUs with unique uncached memory at low addresses.
- *	LBOOT  -- 256MB in size, reads in the LBOOT area result in
- *			uncached references to the local hub's boot prom and
- *			other directory-bus connected devices.
- *	IALIAS -- 8MB in size, reads in the IALIAS result in uncached
- *			references to the local hub's registers.
- */
-
-#define UALIAS_BASE		HSPEC_BASE
-#define UALIAS_SIZE		0x10000000	/* 256 Megabytes */
-#define UALIAS_LIMIT		(UALIAS_BASE + UALIAS_SIZE)
-
-/*
- * The bottom of ualias space is flipped depending on whether you're
- * processor 0 or 1 within a node.
- */
-#ifdef CONFIG_SGI_IP27
-#define UALIAS_FLIP_BASE	UALIAS_BASE
-#define UALIAS_FLIP_SIZE	0x20000
-#define UALIAS_FLIP_BIT		0x10000
-#define UALIAS_FLIP_ADDR(_x)	(cputoslice(smp_processor_id()) ? \
-				 (_x) ^ UALIAS_FLIP_BIT : (_x))
-
-#define LBOOT_BASE		(HSPEC_BASE + 0x10000000)
-#define LBOOT_SIZE		0x10000000
-#define LBOOT_LIMIT		(LBOOT_BASE + LBOOT_SIZE)
-#define LBOOT_STRIDE		0		/* IP27 has only one CPU PROM */
-
-#endif
-
-#define	HUB_REGISTER_WIDGET	1
-#define IALIAS_BASE		NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET)
-#define IALIAS_SIZE		0x800000	/* 8 Megabytes */
-#define IS_IALIAS(_a)		(((_a) >= IALIAS_BASE) &&		\
-				 ((_a) < (IALIAS_BASE + IALIAS_SIZE)))
-
-/*
- * Macro for referring to Hub's RBOOT space
- */
-
-#ifdef CONFIG_SGI_IP27
-#define RBOOT_SIZE		0x10000000	/* 256 Megabytes */
-#define NODE_RBOOT_BASE(_n)	(NODE_HSPEC_BASE(_n) + 0x30000000)
-#define NODE_RBOOT_LIMIT(_n)	(NODE_RBOOT_BASE(_n) + RBOOT_SIZE)
-
-#endif
-
-/*
- * Macros for referring the Hub's back door space
- *
- *   These macros correctly process addresses in any node's space.
- *   WARNING: They won't work in assembler.
- *
- *   BDDIR_ENTRY_LO returns the address of the low double-word of the dir
- *                  entry corresponding to a physical (Cac or Uncac) address.
- *   BDDIR_ENTRY_HI returns the address of the high double-word of the entry.
- *   BDPRT_ENTRY    returns the address of the double-word protection entry
- *                  corresponding to the page containing the physical address.
- *   BDPRT_ENTRY_S  Stores the value into the protection entry.
- *   BDPRT_ENTRY_L  Load the value from the protection entry.
- *   BDECC_ENTRY    returns the address of the ECC byte corresponding to a
- *                  double-word at a specified physical address.
- *   BDECC_ENTRY_H  returns the address of the two ECC bytes corresponding to a
- *                  quad-word at a specified physical address.
- */
-#define NODE_BDOOR_BASE(_n)	(NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2))
-
-#define NODE_BDECC_BASE(_n)	(NODE_BDOOR_BASE(_n))
-#define NODE_BDDIR_BASE(_n)	(NODE_BDOOR_BASE(_n) + (NODE_ADDRSPACE_SIZE/4))
-#ifdef CONFIG_SGI_IP27
-#define BDDIR_ENTRY_LO(_pa)	((HSPEC_BASE +				      \
-				  NODE_ADDRSPACE_SIZE * 3 / 4 +		      \
-				  0x200)				    | \
-				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
-				 UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK  | \
-				 UINT64_CAST(_pa) >> 3 & 0x1f << 4)
-
-#define BDDIR_ENTRY_HI(_pa)	((HSPEC_BASE +				      \
-				  NODE_ADDRSPACE_SIZE * 3 / 4 +		      \
-				  0x208)				    | \
-				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
-				 UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK  | \
-				 UINT64_CAST(_pa) >> 3 & 0x1f << 4)
-
-#define BDPRT_ENTRY(_pa, _rgn)	((HSPEC_BASE +				      \
-				  NODE_ADDRSPACE_SIZE * 3 / 4)		    | \
-				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
-				 UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK  | \
-				 (_rgn) << 3)
-#define BDPRT_ENTRY_ADDR(_pa, _rgn) (BDPRT_ENTRY((_pa), (_rgn)))
-#define BDPRT_ENTRY_S(_pa, _rgn, _val) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))=(_val))
-#define BDPRT_ENTRY_L(_pa, _rgn)	(*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn)))
-
-#define BDECC_ENTRY(_pa)	((HSPEC_BASE +				      \
-				  NODE_ADDRSPACE_SIZE / 2)		    | \
-				 UINT64_CAST(_pa)	 & NASID_MASK	    | \
-				 UINT64_CAST(_pa) >> 2 & BDECC_UPPER_MASK  | \
-				 UINT64_CAST(_pa) >> 3 & 3)
-
-/*
- * Macro to convert a back door directory or protection address into the
- *   raw physical address of the associated cache line or protection page.
- */
-#define BDADDR_IS_DIR(_ba)	((UINT64_CAST  (_ba) & 0x200) != 0)
-#define BDADDR_IS_PRT(_ba)	((UINT64_CAST  (_ba) & 0x200) == 0)
-
-#define BDDIR_TO_MEM(_ba)	(UINT64_CAST (_ba) & NASID_MASK            | \
-				 (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2  | \
-				 (UINT64_CAST(_ba) & 0x1f << 4) << 3)
-
-#define BDPRT_TO_MEM(_ba) 	(UINT64_CAST (_ba) & NASID_MASK	    | \
-				 (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2)
-
-#define BDECC_TO_MEM(_ba)	(UINT64_CAST (_ba) & NASID_MASK	    | \
-				 (UINT64_CAST(_ba) & BDECC_UPPER_MASK)<<2  | \
-				 (UINT64_CAST(_ba) & 3) << 3)
-#endif /* CONFIG_SGI_IP27 */
-
-
-/*
- * The following macros produce the correct base virtual address for
- * the hub registers.  The LOCAL_HUB_* macros produce the appropriate
- * address for the local registers.  The REMOTE_HUB_* macro produce
- * the address for the specified hub's registers.  The intent is
- * that the appropriate PI, MD, NI, or II register would be substituted
- * for _x.
- */
-
-/*
- * WARNING:
- *	When certain Hub chip workaround are defined, it's not sufficient
- *	to dereference the *_HUB_ADDR() macros.  You should instead use
- *	HUB_L() and HUB_S() if you must deal with pointers to hub registers.
- *	Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
- *	They're always safe.
- */
-#define LOCAL_HUB_ADDR(_x)	(HUBREG_CAST (IALIAS_BASE + (_x)))
-#define REMOTE_HUB_ADDR(_n, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
-					      0x800000 + (_x)))
-#ifdef CONFIG_SGI_IP27
-#define REMOTE_HUB_PI_ADDR(_n, _sn, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
-					      0x800000 + (_x)))
-#endif /* CONFIG_SGI_IP27 */
-
-#ifndef __ASSEMBLY__
-
-#define HUB_L(_a)			*(_a)
-#define	HUB_S(_a, _d)			*(_a) = (_d)
-
-#define LOCAL_HUB_L(_r)			HUB_L(LOCAL_HUB_ADDR(_r))
-#define LOCAL_HUB_S(_r, _d)		HUB_S(LOCAL_HUB_ADDR(_r), (_d))
-#define REMOTE_HUB_L(_n, _r)		HUB_L(REMOTE_HUB_ADDR((_n), (_r)))
-#define REMOTE_HUB_S(_n, _r, _d)	HUB_S(REMOTE_HUB_ADDR((_n), (_r)), (_d))
-#define REMOTE_HUB_PI_L(_n, _sn, _r)	HUB_L(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)))
-#define REMOTE_HUB_PI_S(_n, _sn, _r, _d) HUB_S(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)), (_d))
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * The following macros are used to get to a hub/bridge register, given
- * the base of the register space.
- */
-#define HUB_REG_PTR(_base, _off)	\
-	(HUBREG_CAST((__psunsigned_t)(_base) + (__psunsigned_t)(_off)))
-
-#define HUB_REG_PTR_L(_base, _off)	\
-	HUB_L(HUB_REG_PTR((_base), (_off)))
-
-#define HUB_REG_PTR_S(_base, _off, _data)	\
-	HUB_S(HUB_REG_PTR((_base), (_off)), (_data))
-
-/*
- * Software structure locations -- permanently fixed
- *    See diagram in kldir.h
- */
-
-#define PHYS_RAMBASE		0x0
-#define K0_RAMBASE		PHYS_TO_K0(PHYS_RAMBASE)
-
-#define EX_HANDLER_OFFSET(slice) ((slice) << 16)
-#define EX_HANDLER_ADDR(nasid, slice)					\
-	PHYS_TO_K0(NODE_OFFSET(nasid) | EX_HANDLER_OFFSET(slice))
-#define EX_HANDLER_SIZE		0x0400
-
-#define EX_FRAME_OFFSET(slice)	((slice) << 16 | 0x400)
-#define EX_FRAME_ADDR(nasid, slice)					\
-	PHYS_TO_K0(NODE_OFFSET(nasid) | EX_FRAME_OFFSET(slice))
-#define EX_FRAME_SIZE		0x0c00
-
-#define ARCS_SPB_OFFSET		0x1000
-#define ARCS_SPB_ADDR(nasid)						\
-	PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET)
-#define ARCS_SPB_SIZE		0x0400
-
-#define KLDIR_OFFSET		0x2000
-#define KLDIR_ADDR(nasid)						\
-	TO_NODE_UNCAC((nasid), KLDIR_OFFSET)
-#define KLDIR_SIZE		0x0400
-
-
-/*
- * Software structure locations -- indirected through KLDIR
- *    See diagram in kldir.h
- *
- * Important:	All low memory structures must only be accessed
- *		uncached, except for the symmon stacks.
- */
-
-#define KLI_LAUNCH		0		/* Dir. entries */
-#define KLI_KLCONFIG		1
-#define	KLI_NMI			2
-#define KLI_GDA			3
-#define KLI_FREEMEM		4
-#define	KLI_SYMMON_STK		5
-#define KLI_PI_ERROR		6
-#define KLI_KERN_VARS		7
-#define	KLI_KERN_XP		8
-#define	KLI_KERN_PARTID		9
-
-#ifndef __ASSEMBLY__
-
-#define KLD_BASE(nasid)		((kldir_ent_t *) KLDIR_ADDR(nasid))
-#define KLD_LAUNCH(nasid)	(KLD_BASE(nasid) + KLI_LAUNCH)
-#define KLD_NMI(nasid)		(KLD_BASE(nasid) + KLI_NMI)
-#define KLD_KLCONFIG(nasid)	(KLD_BASE(nasid) + KLI_KLCONFIG)
-#define KLD_PI_ERROR(nasid)	(KLD_BASE(nasid) + KLI_PI_ERROR)
-#define KLD_GDA(nasid)		(KLD_BASE(nasid) + KLI_GDA)
-#define KLD_SYMMON_STK(nasid)	(KLD_BASE(nasid) + KLI_SYMMON_STK)
-#define KLD_FREEMEM(nasid)	(KLD_BASE(nasid) + KLI_FREEMEM)
-#define KLD_KERN_VARS(nasid)	(KLD_BASE(nasid) + KLI_KERN_VARS)
-#define	KLD_KERN_XP(nasid)	(KLD_BASE(nasid) + KLI_KERN_XP)
-#define	KLD_KERN_PARTID(nasid)	(KLD_BASE(nasid) + KLI_KERN_PARTID)
-
-#define LAUNCH_OFFSET(nasid, slice)					\
-	(KLD_LAUNCH(nasid)->offset +					\
-	 KLD_LAUNCH(nasid)->stride * (slice))
-#define LAUNCH_ADDR(nasid, slice)					\
-	TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
-#define LAUNCH_SIZE(nasid)	KLD_LAUNCH(nasid)->size
-
-#define NMI_OFFSET(nasid, slice)					\
-	(KLD_NMI(nasid)->offset +					\
-	 KLD_NMI(nasid)->stride * (slice))
-#define NMI_ADDR(nasid, slice)						\
-	TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
-#define NMI_SIZE(nasid)	KLD_NMI(nasid)->size
-
-#define KLCONFIG_OFFSET(nasid)	KLD_KLCONFIG(nasid)->offset
-#define KLCONFIG_ADDR(nasid)						\
-	TO_NODE_UNCAC((nasid), KLCONFIG_OFFSET(nasid))
-#define KLCONFIG_SIZE(nasid)	KLD_KLCONFIG(nasid)->size
-
-#define GDA_ADDR(nasid)		KLD_GDA(nasid)->pointer
-#define GDA_SIZE(nasid)		KLD_GDA(nasid)->size
-
-#define SYMMON_STK_OFFSET(nasid, slice)					\
-	(KLD_SYMMON_STK(nasid)->offset +				\
-	 KLD_SYMMON_STK(nasid)->stride * (slice))
-#define SYMMON_STK_STRIDE(nasid)	KLD_SYMMON_STK(nasid)->stride
-
-#define SYMMON_STK_ADDR(nasid, slice)					\
-	TO_NODE_CAC((nasid), SYMMON_STK_OFFSET(nasid, slice))
-
-#define SYMMON_STK_SIZE(nasid)	KLD_SYMMON_STK(nasid)->stride
-
-#define SYMMON_STK_END(nasid)	(SYMMON_STK_ADDR(nasid, 0) + KLD_SYMMON_STK(nasid)->size)
-
-/* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a
- * relocatable program
- */
-#define	UNIX_DEBUG_LOADADDR	0x300000
-#define	SYMMON_LOADADDR(nasid)						\
-	TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000))
-
-#define FREEMEM_OFFSET(nasid)	KLD_FREEMEM(nasid)->offset
-#define FREEMEM_ADDR(nasid)	SYMMON_STK_END(nasid)
-/*
- * XXX
- * Fix this. FREEMEM_ADDR should be aware of if symmon is loaded.
- * Also, it should take into account what prom thinks to be a safe
- * address
-	PHYS_TO_K0(NODE_OFFSET(nasid) + FREEMEM_OFFSET(nasid))
- */
-#define FREEMEM_SIZE(nasid)	KLD_FREEMEM(nasid)->size
-
-#define PI_ERROR_OFFSET(nasid)	KLD_PI_ERROR(nasid)->offset
-#define PI_ERROR_ADDR(nasid)						\
-	TO_NODE_UNCAC((nasid), PI_ERROR_OFFSET(nasid))
-#define PI_ERROR_SIZE(nasid)	KLD_PI_ERROR(nasid)->size
-
-#define NODE_OFFSET_TO_K0(_nasid, _off)					\
-	PHYS_TO_K0((NODE_OFFSET(_nasid) + (_off)) | CAC_BASE)
-#define NODE_OFFSET_TO_K1(_nasid, _off)					\
-	TO_UNCAC((NODE_OFFSET(_nasid) + (_off)) | UNCAC_BASE)
-#define K0_TO_NODE_OFFSET(_k0addr)					\
-	((__psunsigned_t)(_k0addr) & NODE_ADDRSPACE_MASK)
-
-#define KERN_VARS_ADDR(nasid)	KLD_KERN_VARS(nasid)->pointer
-#define KERN_VARS_SIZE(nasid)	KLD_KERN_VARS(nasid)->size
-
-#define	KERN_XP_ADDR(nasid)	KLD_KERN_XP(nasid)->pointer
-#define	KERN_XP_SIZE(nasid)	KLD_KERN_XP(nasid)->size
-
-#define GPDA_ADDR(nasid)	TO_NODE_CAC(nasid, GPDA_OFFSET)
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* _ASM_SN_ADDRS_H */