diff options
author | Olof Johansson | 2014-05-26 13:24:56 -0700 |
---|---|---|
committer | Olof Johansson | 2014-05-26 13:24:56 -0700 |
commit | 2ca602de42863436cce275dde35c22496344d539 (patch) | |
tree | 9111b81359168bb61767101fb71219a3a6416fd6 /include/dt-bindings | |
parent | 98954f4b122c2c5ac03bb3d21fd171a062dc294f (diff) | |
parent | 57b05572267581c2320462e9b606709fa6da4c5a (diff) |
Merge tag 'omap-for-v3.16/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Merge "ARM: omap pm changes for v3.16 merge window, resend" from Tony Lindgren:
PM related fixes for omap3 that were discovered during omap3
conversion to device tree. This series sets up the PMIC signaling
in a way where we can test for PM regressions easily by
looking at state of the the sys_clkreq and sys_off_mode pins.
Note that this series alone does not make omap3 PM to cut
off core voltage during off-idle, changes to twl4030-power.c
configurations are still needed. Those will be posted
separately.
* tag 'omap-for-v3.16/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig
ARM: dts: Enable N900 keyboard sleep leds by default
ARM: OMAP2+: Fix voltage scaling init for device tree
ARM: dts: Configure omap3 twl4030 I2C4 pins by default
ARM: OMAP3: Fix voltage control for deeper idle states
ARM: OMAP3: Disable broken omap3_set_off_timings function
ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode
ARM: dts: Fix omap serial wake-up when booted with device tree
mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'include/dt-bindings')
-rw-r--r-- | include/dt-bindings/pinctrl/omap.h | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h index b04528cd033c..404ba7ef7813 100644 --- a/include/dt-bindings/pinctrl/omap.h +++ b/include/dt-bindings/pinctrl/omap.h @@ -69,5 +69,17 @@ #define OMAP5_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0xc840) (val) #define DRA7XX_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x3400) (val) +/* + * Define some commonly used pins configured by the boards. + * Note that some boards use alternative pins, so check + * the schematics before using these. + */ +#define OMAP3_UART1_RX 0x152 +#define OMAP3_UART2_RX 0x14a +#define OMAP3_UART3_RX 0x16e +#define OMAP4_UART2_RX 0xdc +#define OMAP4_UART3_RX 0x104 +#define OMAP4_UART4_RX 0x11c + #endif |