Auto-update from upstream

1 files changed, 552 insertions, 424 deletions

diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index d79c8a4bc4f8..9ba806796667 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -30,6 +30,7 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>	/* work_struct */
+#include <linux/mempool.h>
 
 #include <asm/io.h>
 #include <asm/semaphore.h>	/* Needed for MUTEX init macros */
@@ -38,6 +39,355 @@
 #define I2O_QUEUE_EMPTY		0xffffffff
 
 /*
+ *	Cache strategies
+ */
+
+/*	The NULL strategy leaves everything up to the controller. This tends to be a
+ *	pessimal but functional choice.
+ */
+#define CACHE_NULL		0
+/*	Prefetch data when reading. We continually attempt to load the next 32 sectors
+ *	into the controller cache.
+ */
+#define CACHE_PREFETCH		1
+/*	Prefetch data when reading. We sometimes attempt to load the next 32 sectors
+ *	into the controller cache. When an I/O is less <= 8K we assume its probably
+ *	not sequential and don't prefetch (default)
+ */
+#define CACHE_SMARTFETCH	2
+/*	Data is written to the cache and then out on to the disk. The I/O must be
+ *	physically on the medium before the write is acknowledged (default without
+ *	NVRAM)
+ */
+#define CACHE_WRITETHROUGH	17
+/*	Data is written to the cache and then out on to the disk. The controller
+ *	is permitted to write back the cache any way it wants. (default if battery
+ *	backed NVRAM is present). It can be useful to set this for swap regardless of
+ *	battery state.
+ */
+#define CACHE_WRITEBACK		18
+/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
+ *	write large I/O's directly to disk bypassing the cache to avoid the extra
+ *	memory copy hits. Small writes are writeback cached
+ */
+#define CACHE_SMARTBACK		19
+/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
+ *	write large I/O's directly to disk bypassing the cache to avoid the extra
+ *	memory copy hits. Small writes are writethrough cached. Suitable for devices
+ *	lacking battery backup
+ */
+#define CACHE_SMARTTHROUGH	20
+
+/*
+ *	Ioctl structures
+ */
+
+#define 	BLKI2OGRSTRAT	_IOR('2', 1, int)
+#define 	BLKI2OGWSTRAT	_IOR('2', 2, int)
+#define 	BLKI2OSRSTRAT	_IOW('2', 3, int)
+#define 	BLKI2OSWSTRAT	_IOW('2', 4, int)
+
+/*
+ *	I2O Function codes
+ */
+
+/*
+ *	Executive Class
+ */
+#define	I2O_CMD_ADAPTER_ASSIGN		0xB3
+#define	I2O_CMD_ADAPTER_READ		0xB2
+#define	I2O_CMD_ADAPTER_RELEASE		0xB5
+#define	I2O_CMD_BIOS_INFO_SET		0xA5
+#define	I2O_CMD_BOOT_DEVICE_SET		0xA7
+#define	I2O_CMD_CONFIG_VALIDATE		0xBB
+#define	I2O_CMD_CONN_SETUP		0xCA
+#define	I2O_CMD_DDM_DESTROY		0xB1
+#define	I2O_CMD_DDM_ENABLE		0xD5
+#define	I2O_CMD_DDM_QUIESCE		0xC7
+#define	I2O_CMD_DDM_RESET		0xD9
+#define	I2O_CMD_DDM_SUSPEND		0xAF
+#define	I2O_CMD_DEVICE_ASSIGN		0xB7
+#define	I2O_CMD_DEVICE_RELEASE		0xB9
+#define	I2O_CMD_HRT_GET			0xA8
+#define	I2O_CMD_ADAPTER_CLEAR		0xBE
+#define	I2O_CMD_ADAPTER_CONNECT		0xC9
+#define	I2O_CMD_ADAPTER_RESET		0xBD
+#define	I2O_CMD_LCT_NOTIFY		0xA2
+#define	I2O_CMD_OUTBOUND_INIT		0xA1
+#define	I2O_CMD_PATH_ENABLE		0xD3
+#define	I2O_CMD_PATH_QUIESCE		0xC5
+#define	I2O_CMD_PATH_RESET		0xD7
+#define	I2O_CMD_STATIC_MF_CREATE	0xDD
+#define	I2O_CMD_STATIC_MF_RELEASE	0xDF
+#define	I2O_CMD_STATUS_GET		0xA0
+#define	I2O_CMD_SW_DOWNLOAD		0xA9
+#define	I2O_CMD_SW_UPLOAD		0xAB
+#define	I2O_CMD_SW_REMOVE		0xAD
+#define	I2O_CMD_SYS_ENABLE		0xD1
+#define	I2O_CMD_SYS_MODIFY		0xC1
+#define	I2O_CMD_SYS_QUIESCE		0xC3
+#define	I2O_CMD_SYS_TAB_SET		0xA3
+
+/*
+ * Utility Class
+ */
+#define I2O_CMD_UTIL_NOP		0x00
+#define I2O_CMD_UTIL_ABORT		0x01
+#define I2O_CMD_UTIL_CLAIM		0x09
+#define I2O_CMD_UTIL_RELEASE		0x0B
+#define I2O_CMD_UTIL_PARAMS_GET		0x06
+#define I2O_CMD_UTIL_PARAMS_SET		0x05
+#define I2O_CMD_UTIL_EVT_REGISTER	0x13
+#define I2O_CMD_UTIL_EVT_ACK		0x14
+#define I2O_CMD_UTIL_CONFIG_DIALOG	0x10
+#define I2O_CMD_UTIL_DEVICE_RESERVE	0x0D
+#define I2O_CMD_UTIL_DEVICE_RELEASE	0x0F
+#define I2O_CMD_UTIL_LOCK		0x17
+#define I2O_CMD_UTIL_LOCK_RELEASE	0x19
+#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY	0x15
+
+/*
+ * SCSI Host Bus Adapter Class
+ */
+#define I2O_CMD_SCSI_EXEC		0x81
+#define I2O_CMD_SCSI_ABORT		0x83
+#define I2O_CMD_SCSI_BUSRESET		0x27
+
+/*
+ * Bus Adapter Class
+ */
+#define I2O_CMD_BUS_ADAPTER_RESET	0x85
+#define I2O_CMD_BUS_RESET		0x87
+#define I2O_CMD_BUS_SCAN		0x89
+#define I2O_CMD_BUS_QUIESCE		0x8b
+
+/*
+ * Random Block Storage Class
+ */
+#define I2O_CMD_BLOCK_READ		0x30
+#define I2O_CMD_BLOCK_WRITE		0x31
+#define I2O_CMD_BLOCK_CFLUSH		0x37
+#define I2O_CMD_BLOCK_MLOCK		0x49
+#define I2O_CMD_BLOCK_MUNLOCK		0x4B
+#define I2O_CMD_BLOCK_MMOUNT		0x41
+#define I2O_CMD_BLOCK_MEJECT		0x43
+#define I2O_CMD_BLOCK_POWER		0x70
+
+#define I2O_CMD_PRIVATE			0xFF
+
+/* Command status values  */
+
+#define I2O_CMD_IN_PROGRESS	0x01
+#define I2O_CMD_REJECTED	0x02
+#define I2O_CMD_FAILED		0x03
+#define I2O_CMD_COMPLETED	0x04
+
+/* I2O API function return values */
+
+#define I2O_RTN_NO_ERROR			0
+#define I2O_RTN_NOT_INIT			1
+#define I2O_RTN_FREE_Q_EMPTY			2
+#define I2O_RTN_TCB_ERROR			3
+#define I2O_RTN_TRANSACTION_ERROR		4
+#define I2O_RTN_ADAPTER_ALREADY_INIT		5
+#define I2O_RTN_MALLOC_ERROR			6
+#define I2O_RTN_ADPTR_NOT_REGISTERED		7
+#define I2O_RTN_MSG_REPLY_TIMEOUT		8
+#define I2O_RTN_NO_STATUS			9
+#define I2O_RTN_NO_FIRM_VER			10
+#define	I2O_RTN_NO_LINK_SPEED			11
+
+/* Reply message status defines for all messages */
+
+#define I2O_REPLY_STATUS_SUCCESS                    	0x00
+#define I2O_REPLY_STATUS_ABORT_DIRTY                	0x01
+#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER     	0x02
+#define	I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER		0x03
+#define	I2O_REPLY_STATUS_ERROR_DIRTY			0x04
+#define	I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER		0x05
+#define	I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER		0x06
+#define	I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY		0x08
+#define	I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER	0x09
+#define	I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER	0x0A
+#define	I2O_REPLY_STATUS_TRANSACTION_ERROR		0x0B
+#define	I2O_REPLY_STATUS_PROGRESS_REPORT		0x80
+
+/* Status codes and Error Information for Parameter functions */
+
+#define I2O_PARAMS_STATUS_SUCCESS		0x00
+#define I2O_PARAMS_STATUS_BAD_KEY_ABORT		0x01
+#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE   	0x02
+#define I2O_PARAMS_STATUS_BUFFER_FULL		0x03
+#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL	0x04
+#define I2O_PARAMS_STATUS_FIELD_UNREADABLE	0x05
+#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE	0x06
+#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS	0x07
+#define I2O_PARAMS_STATUS_INVALID_GROUP_ID	0x08
+#define I2O_PARAMS_STATUS_INVALID_OPERATION	0x09
+#define I2O_PARAMS_STATUS_NO_KEY_FIELD		0x0A
+#define I2O_PARAMS_STATUS_NO_SUCH_FIELD		0x0B
+#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP	0x0C
+#define I2O_PARAMS_STATUS_OPERATION_ERROR	0x0D
+#define I2O_PARAMS_STATUS_SCALAR_ERROR		0x0E
+#define I2O_PARAMS_STATUS_TABLE_ERROR		0x0F
+#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE	0x10
+
+/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
+ * messages: Table 3-2 Detailed Status Codes.*/
+
+#define I2O_DSC_SUCCESS                        0x0000
+#define I2O_DSC_BAD_KEY                        0x0002
+#define I2O_DSC_TCL_ERROR                      0x0003
+#define I2O_DSC_REPLY_BUFFER_FULL              0x0004
+#define I2O_DSC_NO_SUCH_PAGE                   0x0005
+#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT     0x0006
+#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD     0x0007
+#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE         0x0009
+#define I2O_DSC_UNSUPPORTED_FUNCTION           0x000A
+#define I2O_DSC_DEVICE_LOCKED                  0x000B
+#define I2O_DSC_DEVICE_RESET                   0x000C
+#define I2O_DSC_INAPPROPRIATE_FUNCTION         0x000D
+#define I2O_DSC_INVALID_INITIATOR_ADDRESS      0x000E
+#define I2O_DSC_INVALID_MESSAGE_FLAGS          0x000F
+#define I2O_DSC_INVALID_OFFSET                 0x0010
+#define I2O_DSC_INVALID_PARAMETER              0x0011
+#define I2O_DSC_INVALID_REQUEST                0x0012
+#define I2O_DSC_INVALID_TARGET_ADDRESS         0x0013
+#define I2O_DSC_MESSAGE_TOO_LARGE              0x0014
+#define I2O_DSC_MESSAGE_TOO_SMALL              0x0015
+#define I2O_DSC_MISSING_PARAMETER              0x0016
+#define I2O_DSC_TIMEOUT                        0x0017
+#define I2O_DSC_UNKNOWN_ERROR                  0x0018
+#define I2O_DSC_UNKNOWN_FUNCTION               0x0019
+#define I2O_DSC_UNSUPPORTED_VERSION            0x001A
+#define I2O_DSC_DEVICE_BUSY                    0x001B
+#define I2O_DSC_DEVICE_NOT_AVAILABLE           0x001C
+
+/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed
+   Status Codes.*/
+
+#define I2O_BSA_DSC_SUCCESS               0x0000
+#define I2O_BSA_DSC_MEDIA_ERROR           0x0001
+#define I2O_BSA_DSC_ACCESS_ERROR          0x0002
+#define I2O_BSA_DSC_DEVICE_FAILURE        0x0003
+#define I2O_BSA_DSC_DEVICE_NOT_READY      0x0004
+#define I2O_BSA_DSC_MEDIA_NOT_PRESENT     0x0005
+#define I2O_BSA_DSC_MEDIA_LOCKED          0x0006
+#define I2O_BSA_DSC_MEDIA_FAILURE         0x0007
+#define I2O_BSA_DSC_PROTOCOL_FAILURE      0x0008
+#define I2O_BSA_DSC_BUS_FAILURE           0x0009
+#define I2O_BSA_DSC_ACCESS_VIOLATION      0x000A
+#define I2O_BSA_DSC_WRITE_PROTECTED       0x000B
+#define I2O_BSA_DSC_DEVICE_RESET          0x000C
+#define I2O_BSA_DSC_VOLUME_CHANGED        0x000D
+#define I2O_BSA_DSC_TIMEOUT               0x000E
+
+/* FailureStatusCodes, Table 3-3 Message Failure Codes */
+
+#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED             0x81
+#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED            0x82
+#define I2O_FSC_TRANSPORT_CONGESTION                    0x83
+#define I2O_FSC_TRANSPORT_FAILURE                       0x84
+#define I2O_FSC_TRANSPORT_STATE_ERROR                   0x85
+#define I2O_FSC_TRANSPORT_TIME_OUT                      0x86
+#define I2O_FSC_TRANSPORT_ROUTING_FAILURE               0x87
+#define I2O_FSC_TRANSPORT_INVALID_VERSION               0x88
+#define I2O_FSC_TRANSPORT_INVALID_OFFSET                0x89
+#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS             0x8A
+#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL               0x8B
+#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE               0x8C
+#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID             0x8D
+#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID          0x8E
+#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT     0x8F
+#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE               0xFF
+
+/* Device Claim Types */
+#define	I2O_CLAIM_PRIMARY					0x01000000
+#define	I2O_CLAIM_MANAGEMENT					0x02000000
+#define	I2O_CLAIM_AUTHORIZED					0x03000000
+#define	I2O_CLAIM_SECONDARY					0x04000000
+
+/* Message header defines for VersionOffset */
+#define I2OVER15	0x0001
+#define I2OVER20	0x0002
+
+/* Default is 1.5 */
+#define I2OVERSION	I2OVER15
+
+#define SGL_OFFSET_0    I2OVERSION
+#define SGL_OFFSET_4    (0x0040 | I2OVERSION)
+#define SGL_OFFSET_5    (0x0050 | I2OVERSION)
+#define SGL_OFFSET_6    (0x0060 | I2OVERSION)
+#define SGL_OFFSET_7    (0x0070 | I2OVERSION)
+#define SGL_OFFSET_8    (0x0080 | I2OVERSION)
+#define SGL_OFFSET_9    (0x0090 | I2OVERSION)
+#define SGL_OFFSET_10   (0x00A0 | I2OVERSION)
+#define SGL_OFFSET_11   (0x00B0 | I2OVERSION)
+#define SGL_OFFSET_12   (0x00C0 | I2OVERSION)
+#define SGL_OFFSET(x)   (((x)<<4) | I2OVERSION)
+
+/* Transaction Reply Lists (TRL) Control Word structure */
+#define TRL_SINGLE_FIXED_LENGTH		0x00
+#define TRL_SINGLE_VARIABLE_LENGTH	0x40
+#define TRL_MULTIPLE_FIXED_LENGTH	0x80
+
+ /* msg header defines for MsgFlags */
+#define MSG_STATIC	0x0100
+#define MSG_64BIT_CNTXT	0x0200
+#define MSG_MULTI_TRANS	0x1000
+#define MSG_FAIL	0x2000
+#define MSG_FINAL	0x4000
+#define MSG_REPLY	0x8000
+
+ /* minimum size msg */
+#define THREE_WORD_MSG_SIZE	0x00030000
+#define FOUR_WORD_MSG_SIZE	0x00040000
+#define FIVE_WORD_MSG_SIZE	0x00050000
+#define SIX_WORD_MSG_SIZE	0x00060000
+#define SEVEN_WORD_MSG_SIZE	0x00070000
+#define EIGHT_WORD_MSG_SIZE	0x00080000
+#define NINE_WORD_MSG_SIZE	0x00090000
+#define TEN_WORD_MSG_SIZE	0x000A0000
+#define ELEVEN_WORD_MSG_SIZE	0x000B0000
+#define I2O_MESSAGE_SIZE(x)	((x)<<16)
+
+/* special TID assignments */
+#define ADAPTER_TID		0
+#define HOST_TID		1
+
+/* outbound queue defines */
+#define I2O_MAX_OUTBOUND_MSG_FRAMES	128
+#define I2O_OUTBOUND_MSG_FRAME_SIZE	128	/* in 32-bit words */
+
+/* inbound queue definitions */
+#define I2O_MSG_INPOOL_MIN		32
+#define I2O_INBOUND_MSG_FRAME_SIZE	128	/* in 32-bit words */
+
+#define I2O_POST_WAIT_OK	0
+#define I2O_POST_WAIT_TIMEOUT	-ETIMEDOUT
+
+#define I2O_CONTEXT_LIST_MIN_LENGTH	15
+#define I2O_CONTEXT_LIST_USED		0x01
+#define I2O_CONTEXT_LIST_DELETED	0x02
+
+/* timeouts */
+#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE	15
+#define I2O_TIMEOUT_MESSAGE_GET		5
+#define I2O_TIMEOUT_RESET		30
+#define I2O_TIMEOUT_STATUS_GET		5
+#define I2O_TIMEOUT_LCT_GET		360
+#define I2O_TIMEOUT_SCSI_SCB_ABORT	240
+
+/* retries */
+#define I2O_HRT_GET_TRIES		3
+#define I2O_LCT_GET_TRIES		3
+
+/* defines for max_sectors and max_phys_segments */
+#define I2O_MAX_SECTORS			1024
+#define I2O_MAX_SECTORS_LIMITED		128
+#define I2O_MAX_PHYS_SEGMENTS		MAX_PHYS_SEGMENTS
+
+/*
  *	Message structures
  */
 struct i2o_message {
@@ -58,6 +408,12 @@ struct i2o_message {
 	u32 body[0];
 };
 
+/* MFA and I2O message used by mempool */
+struct i2o_msg_mfa {
+	u32 mfa;		/* MFA returned by the controller */
+	struct i2o_message msg;	/* I2O message */
+};
+
 /*
  *	Each I2O device entity has one of these. There is one per device.
  */
@@ -130,6 +486,15 @@ struct i2o_dma {
 };
 
 /*
+ *	Contains slab cache and mempool information
+ */
+struct i2o_pool {
+	char *name;
+	kmem_cache_t *slab;
+	mempool_t *mempool;
+};
+
+/*
  *	Contains IO mapped address information
  */
 struct i2o_io {
@@ -174,8 +539,6 @@ struct i2o_controller {
 	void __iomem *irq_status;	/* Interrupt status register address */
 	void __iomem *irq_mask;	/* Interrupt mask register address */
 
-	/* Dynamic LCT related data */
-
 	struct i2o_dma status;	/* IOP status block */
 
 	struct i2o_dma hrt;	/* HW Resource Table */
@@ -188,6 +551,8 @@ struct i2o_controller {
 	struct i2o_io in_queue;	/* inbound message queue Host->IOP */
 	struct i2o_dma out_queue;	/* outbound message queue IOP->Host */
 
+	struct i2o_pool in_msg;	/* mempool for inbound messages */
+
 	unsigned int battery:1;	/* Has a battery backup */
 	unsigned int io_alloc:1;	/* An I/O resource was allocated */
 	unsigned int mem_alloc:1;	/* A memory resource was allocated */
@@ -196,7 +561,6 @@ struct i2o_controller {
 	struct resource mem_resource;	/* Mem resource allocated to the IOP */
 
 	struct device device;
-	struct class_device *classdev;	/* I2O controller class device */
 	struct i2o_device *exec;	/* Executive */
 #if BITS_PER_LONG == 64
 	spinlock_t context_list_lock;	/* lock for context_list */
@@ -247,16 +611,13 @@ struct i2o_sys_tbl {
 extern struct list_head i2o_controllers;
 
 /* Message functions */
-static inline u32 i2o_msg_get(struct i2o_controller *,
-			      struct i2o_message __iomem **);
-extern u32 i2o_msg_get_wait(struct i2o_controller *,
-			    struct i2o_message __iomem **, int);
-static inline void i2o_msg_post(struct i2o_controller *, u32);
-static inline int i2o_msg_post_wait(struct i2o_controller *, u32,
-				    unsigned long);
-extern int i2o_msg_post_wait_mem(struct i2o_controller *, u32, unsigned long,
-				 struct i2o_dma *);
-extern void i2o_msg_nop(struct i2o_controller *, u32);
+static inline struct i2o_message *i2o_msg_get(struct i2o_controller *);
+extern struct i2o_message *i2o_msg_get_wait(struct i2o_controller *, int);
+static inline void i2o_msg_post(struct i2o_controller *, struct i2o_message *);
+static inline int i2o_msg_post_wait(struct i2o_controller *,
+				    struct i2o_message *, unsigned long);
+extern int i2o_msg_post_wait_mem(struct i2o_controller *, struct i2o_message *,
+				 unsigned long, struct i2o_dma *);
 static inline void i2o_flush_reply(struct i2o_controller *, u32);
 
 /* IOP functions */
@@ -384,10 +745,10 @@ static inline u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size)
 static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
 					    size_t size,
 					    enum dma_data_direction direction,
-					    u32 __iomem ** sg_ptr)
+					    u32 ** sg_ptr)
 {
 	u32 sg_flags;
-	u32 __iomem *mptr = *sg_ptr;
+	u32 *mptr = *sg_ptr;
 	dma_addr_t dma_addr;
 
 	switch (direction) {
@@ -405,16 +766,16 @@ static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
 	if (!dma_mapping_error(dma_addr)) {
 #ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
 		if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
-			writel(0x7C020002, mptr++);
-			writel(PAGE_SIZE, mptr++);
+			*mptr++ = cpu_to_le32(0x7C020002);
+			*mptr++ = cpu_to_le32(PAGE_SIZE);
 		}
 #endif
 
-		writel(sg_flags | size, mptr++);
-		writel(i2o_dma_low(dma_addr), mptr++);
+		*mptr++ = cpu_to_le32(sg_flags | size);
+		*mptr++ = cpu_to_le32(i2o_dma_low(dma_addr));
 #ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
 		if ((sizeof(dma_addr_t) > 4) && c->pae_support)
-			writel(i2o_dma_high(dma_addr), mptr++);
+			*mptr++ = cpu_to_le32(i2o_dma_high(dma_addr));
 #endif
 		*sg_ptr = mptr;
 	}
@@ -439,10 +800,10 @@ static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
 static inline int i2o_dma_map_sg(struct i2o_controller *c,
 				 struct scatterlist *sg, int sg_count,
 				 enum dma_data_direction direction,
-				 u32 __iomem ** sg_ptr)
+				 u32 ** sg_ptr)
 {
 	u32 sg_flags;
-	u32 __iomem *mptr = *sg_ptr;
+	u32 *mptr = *sg_ptr;
 
 	switch (direction) {
 	case DMA_TO_DEVICE:
@@ -461,19 +822,19 @@ static inline int i2o_dma_map_sg(struct i2o_controller *c,
 
 #ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
 	if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
-		writel(0x7C020002, mptr++);
-		writel(PAGE_SIZE, mptr++);
+		*mptr++ = cpu_to_le32(0x7C020002);
+		*mptr++ = cpu_to_le32(PAGE_SIZE);
 	}
 #endif
 
 	while (sg_count-- > 0) {
 		if (!sg_count)
 			sg_flags |= 0xC0000000;
-		writel(sg_flags | sg_dma_len(sg), mptr++);
-		writel(i2o_dma_low(sg_dma_address(sg)), mptr++);
+		*mptr++ = cpu_to_le32(sg_flags | sg_dma_len(sg));
+		*mptr++ = cpu_to_le32(i2o_dma_low(sg_dma_address(sg)));
 #ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
 		if ((sizeof(dma_addr_t) > 4) && c->pae_support)
-			writel(i2o_dma_high(sg_dma_address(sg)), mptr++);
+			*mptr++ = cpu_to_le32(i2o_dma_high(sg_dma_address(sg)));
 #endif
 		sg++;
 	}
@@ -563,6 +924,64 @@ static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr,
 	return 0;
 };
 
+/*
+ *	i2o_pool_alloc - Allocate an slab cache and mempool
+ *	@mempool: pointer to struct i2o_pool to write data into.
+ *	@name: name which is used to identify cache
+ *	@size: size of each object
+ *	@min_nr: minimum number of objects
+ *
+ *	First allocates a slab cache with name and size. Then allocates a
+ *	mempool which uses the slab cache for allocation and freeing.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static inline int i2o_pool_alloc(struct i2o_pool *pool, const char *name,
+				 size_t size, int min_nr)
+{
+	pool->name = kmalloc(strlen(name) + 1, GFP_KERNEL);
+	if (!pool->name)
+		goto exit;
+	strcpy(pool->name, name);
+
+	pool->slab =
+	    kmem_cache_create(pool->name, size, 0, SLAB_HWCACHE_ALIGN, NULL,
+			      NULL);
+	if (!pool->slab)
+		goto free_name;
+
+	pool->mempool =
+	    mempool_create(min_nr, mempool_alloc_slab, mempool_free_slab,
+			   pool->slab);
+	if (!pool->mempool)
+		goto free_slab;
+
+	return 0;
+
+      free_slab:
+	kmem_cache_destroy(pool->slab);
+
+      free_name:
+	kfree(pool->name);
+
+      exit:
+	return -ENOMEM;
+};
+
+/*
+ *	i2o_pool_free - Free slab cache and mempool again
+ *	@mempool: pointer to struct i2o_pool which should be freed
+ *
+ *	Note that you have to return all objects to the mempool again before
+ *	calling i2o_pool_free().
+ */
+static inline void i2o_pool_free(struct i2o_pool *pool)
+{
+	mempool_destroy(pool->mempool);
+	kmem_cache_destroy(pool->slab);
+	kfree(pool->name);
+};
+
 /* I2O driver (OSM) functions */
 extern int i2o_driver_register(struct i2o_driver *);
 extern void i2o_driver_unregister(struct i2o_driver *);
@@ -638,39 +1057,89 @@ extern int i2o_exec_lct_get(struct i2o_controller *);
 #define kobj_to_i2o_device(kobj) to_i2o_device(container_of(kobj, struct device, kobj))
 
 /**
+ *	i2o_out_to_virt - Turn an I2O message to a virtual address
+ *	@c: controller
+ *	@m: message engine value
+ *
+ *	Turn a receive message from an I2O controller bus address into
+ *	a Linux virtual address. The shared page frame is a linear block
+ *	so we simply have to shift the offset. This function does not
+ *	work for sender side messages as they are ioremap objects
+ *	provided by the I2O controller.
+ */
+static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c,
+						      u32 m)
+{
+	BUG_ON(m < c->out_queue.phys
+	       || m >= c->out_queue.phys + c->out_queue.len);
+
+	return c->out_queue.virt + (m - c->out_queue.phys);
+};
+
+/**
+ *	i2o_msg_in_to_virt - Turn an I2O message to a virtual address
+ *	@c: controller
+ *	@m: message engine value
+ *
+ *	Turn a send message from an I2O controller bus address into
+ *	a Linux virtual address. The shared page frame is a linear block
+ *	so we simply have to shift the offset. This function does not
+ *	work for receive side messages as they are kmalloc objects
+ *	in a different pool.
+ */
+static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct
+							     i2o_controller *c,
+							     u32 m)
+{
+	return c->in_queue.virt + m;
+};
+
+/**
  *	i2o_msg_get - obtain an I2O message from the IOP
  *	@c: I2O controller
- *	@msg: pointer to a I2O message pointer
  *
- *	This function tries to get a message slot. If no message slot is
+ *	This function tries to get a message frame. If no message frame is
  *	available do not wait until one is availabe (see also i2o_msg_get_wait).
+ *	The returned pointer to the message frame is not in I/O memory, it is
+ *	allocated from a mempool. But because a MFA is allocated from the
+ *	controller too it is guaranteed that i2o_msg_post() will never fail.
  *
- *	On a success the message is returned and the pointer to the message is
- *	set in msg. The returned message is the physical page frame offset
- *	address from the read port (see the i2o spec). If no message is
- *	available returns I2O_QUEUE_EMPTY and msg is leaved untouched.
+ *	On a success a pointer to the message frame is returned. If the message
+ *	queue is empty -EBUSY is returned and if no memory is available -ENOMEM
+ *	is returned.
  */
-static inline u32 i2o_msg_get(struct i2o_controller *c,
-			      struct i2o_message __iomem ** msg)
+static inline struct i2o_message *i2o_msg_get(struct i2o_controller *c)
 {
-	u32 m = readl(c->in_port);
-
-	if (m != I2O_QUEUE_EMPTY)
-		*msg = c->in_queue.virt + m;
+	struct i2o_msg_mfa *mmsg = mempool_alloc(c->in_msg.mempool, GFP_ATOMIC);
+	if (!mmsg)
+		return ERR_PTR(-ENOMEM);
+
+	mmsg->mfa = readl(c->in_port);
+	if (mmsg->mfa == I2O_QUEUE_EMPTY) {
+		mempool_free(mmsg, c->in_msg.mempool);
+		return ERR_PTR(-EBUSY);
+	}
 
-	return m;
+	return &mmsg->msg;
 };
 
 /**
  *	i2o_msg_post - Post I2O message to I2O controller
  *	@c: I2O controller to which the message should be send
- *	@m: the message identifier
+ *	@msg: message returned by i2o_msg_get()
  *
- *	Post the message to the I2O controller.
+ *	Post the message to the I2O controller and return immediately.
  */
-static inline void i2o_msg_post(struct i2o_controller *c, u32 m)
+static inline void i2o_msg_post(struct i2o_controller *c,
+				struct i2o_message *msg)
 {
-	writel(m, c->in_port);
+	struct i2o_msg_mfa *mmsg;
+
+	mmsg = container_of(msg, struct i2o_msg_mfa, msg);
+	memcpy_toio(i2o_msg_in_to_virt(c, mmsg->mfa), msg,
+		    (le32_to_cpu(msg->u.head[0]) >> 16) << 2);
+	writel(mmsg->mfa, c->in_port);
+	mempool_free(mmsg, c->in_msg.mempool);
 };
 
 /**
@@ -685,62 +1154,66 @@ static inline void i2o_msg_post(struct i2o_controller *c, u32 m)
  *
  *	Returns 0 on success or negative error code on failure.
  */
-static inline int i2o_msg_post_wait(struct i2o_controller *c, u32 m,
+static inline int i2o_msg_post_wait(struct i2o_controller *c,
+				    struct i2o_message *msg,
 				    unsigned long timeout)
 {
-	return i2o_msg_post_wait_mem(c, m, timeout, NULL);
+	return i2o_msg_post_wait_mem(c, msg, timeout, NULL);
 };
 
 /**
- *	i2o_flush_reply - Flush reply from I2O controller
- *	@c: I2O controller
- *	@m: the message identifier
+ *	i2o_msg_nop_mfa - Returns a fetched MFA back to the controller
+ *	@c: I2O controller from which the MFA was fetched
+ *	@mfa: MFA which should be returned
  *
- *	The I2O controller must be informed that the reply message is not needed
- *	anymore. If you forget to flush the reply, the message frame can't be
- *	used by the controller anymore and is therefore lost.
+ *	This function must be used for preserved messages, because i2o_msg_nop()
+ *	also returns the allocated memory back to the msg_pool mempool.
  */
-static inline void i2o_flush_reply(struct i2o_controller *c, u32 m)
+static inline void i2o_msg_nop_mfa(struct i2o_controller *c, u32 mfa)
 {
-	writel(m, c->out_port);
+	struct i2o_message __iomem *msg;
+	u32 nop[3] = {
+		THREE_WORD_MSG_SIZE | SGL_OFFSET_0,
+		I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID,
+		0x00000000
+	};
+
+	msg = i2o_msg_in_to_virt(c, mfa);
+	memcpy_toio(msg, nop, sizeof(nop));
+	writel(mfa, c->in_port);
 };
 
 /**
- *	i2o_out_to_virt - Turn an I2O message to a virtual address
- *	@c: controller
- *	@m: message engine value
+ *	i2o_msg_nop - Returns a message which is not used
+ *	@c: I2O controller from which the message was created
+ *	@msg: message which should be returned
  *
- *	Turn a receive message from an I2O controller bus address into
- *	a Linux virtual address. The shared page frame is a linear block
- *	so we simply have to shift the offset. This function does not
- *	work for sender side messages as they are ioremap objects
- *	provided by the I2O controller.
+ *	If you fetch a message via i2o_msg_get, and can't use it, you must
+ *	return the message with this function. Otherwise the MFA is lost as well
+ *	as the allocated memory from the mempool.
  */
-static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c,
-						      u32 m)
+static inline void i2o_msg_nop(struct i2o_controller *c,
+			       struct i2o_message *msg)
 {
-	BUG_ON(m < c->out_queue.phys
-	       || m >= c->out_queue.phys + c->out_queue.len);
+	struct i2o_msg_mfa *mmsg;
+	mmsg = container_of(msg, struct i2o_msg_mfa, msg);
 
-	return c->out_queue.virt + (m - c->out_queue.phys);
+	i2o_msg_nop_mfa(c, mmsg->mfa);
+	mempool_free(mmsg, c->in_msg.mempool);
 };
 
 /**
- *	i2o_msg_in_to_virt - Turn an I2O message to a virtual address
- *	@c: controller
- *	@m: message engine value
+ *	i2o_flush_reply - Flush reply from I2O controller
+ *	@c: I2O controller
+ *	@m: the message identifier
  *
- *	Turn a send message from an I2O controller bus address into
- *	a Linux virtual address. The shared page frame is a linear block
- *	so we simply have to shift the offset. This function does not
- *	work for receive side messages as they are kmalloc objects
- *	in a different pool.
+ *	The I2O controller must be informed that the reply message is not needed
+ *	anymore. If you forget to flush the reply, the message frame can't be
+ *	used by the controller anymore and is therefore lost.
  */
-static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct
-							     i2o_controller *c,
-							     u32 m)
+static inline void i2o_flush_reply(struct i2o_controller *c, u32 m)
 {
-	return c->in_queue.virt + m;
+	writel(m, c->out_port);
 };
 
 /*
@@ -779,350 +1252,5 @@ extern void i2o_dump_message(struct i2o_message *);
 extern void i2o_dump_hrt(struct i2o_controller *c);
 extern void i2o_debug_state(struct i2o_controller *c);
 
-/*
- *	Cache strategies
- */
-
-/*	The NULL strategy leaves everything up to the controller. This tends to be a
- *	pessimal but functional choice.
- */
-#define CACHE_NULL		0
-/*	Prefetch data when reading. We continually attempt to load the next 32 sectors
- *	into the controller cache.
- */
-#define CACHE_PREFETCH		1
-/*	Prefetch data when reading. We sometimes attempt to load the next 32 sectors
- *	into the controller cache. When an I/O is less <= 8K we assume its probably
- *	not sequential and don't prefetch (default)
- */
-#define CACHE_SMARTFETCH	2
-/*	Data is written to the cache and then out on to the disk. The I/O must be
- *	physically on the medium before the write is acknowledged (default without
- *	NVRAM)
- */
-#define CACHE_WRITETHROUGH	17
-/*	Data is written to the cache and then out on to the disk. The controller
- *	is permitted to write back the cache any way it wants. (default if battery
- *	backed NVRAM is present). It can be useful to set this for swap regardless of
- *	battery state.
- */
-#define CACHE_WRITEBACK		18
-/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
- *	write large I/O's directly to disk bypassing the cache to avoid the extra
- *	memory copy hits. Small writes are writeback cached
- */
-#define CACHE_SMARTBACK		19
-/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
- *	write large I/O's directly to disk bypassing the cache to avoid the extra
- *	memory copy hits. Small writes are writethrough cached. Suitable for devices
- *	lacking battery backup
- */
-#define CACHE_SMARTTHROUGH	20
-
-/*
- *	Ioctl structures
- */
-
-#define 	BLKI2OGRSTRAT	_IOR('2', 1, int)
-#define 	BLKI2OGWSTRAT	_IOR('2', 2, int)
-#define 	BLKI2OSRSTRAT	_IOW('2', 3, int)
-#define 	BLKI2OSWSTRAT	_IOW('2', 4, int)
-
-/*
- *	I2O Function codes
- */
-
-/*
- *	Executive Class
- */
-#define	I2O_CMD_ADAPTER_ASSIGN		0xB3
-#define	I2O_CMD_ADAPTER_READ		0xB2
-#define	I2O_CMD_ADAPTER_RELEASE		0xB5
-#define	I2O_CMD_BIOS_INFO_SET		0xA5
-#define	I2O_CMD_BOOT_DEVICE_SET		0xA7
-#define	I2O_CMD_CONFIG_VALIDATE		0xBB
-#define	I2O_CMD_CONN_SETUP		0xCA
-#define	I2O_CMD_DDM_DESTROY		0xB1
-#define	I2O_CMD_DDM_ENABLE		0xD5
-#define	I2O_CMD_DDM_QUIESCE		0xC7
-#define	I2O_CMD_DDM_RESET		0xD9
-#define	I2O_CMD_DDM_SUSPEND		0xAF
-#define	I2O_CMD_DEVICE_ASSIGN		0xB7
-#define	I2O_CMD_DEVICE_RELEASE		0xB9
-#define	I2O_CMD_HRT_GET			0xA8
-#define	I2O_CMD_ADAPTER_CLEAR		0xBE
-#define	I2O_CMD_ADAPTER_CONNECT		0xC9
-#define	I2O_CMD_ADAPTER_RESET		0xBD
-#define	I2O_CMD_LCT_NOTIFY		0xA2
-#define	I2O_CMD_OUTBOUND_INIT		0xA1
-#define	I2O_CMD_PATH_ENABLE		0xD3
-#define	I2O_CMD_PATH_QUIESCE		0xC5
-#define	I2O_CMD_PATH_RESET		0xD7
-#define	I2O_CMD_STATIC_MF_CREATE	0xDD
-#define	I2O_CMD_STATIC_MF_RELEASE	0xDF
-#define	I2O_CMD_STATUS_GET		0xA0
-#define	I2O_CMD_SW_DOWNLOAD		0xA9
-#define	I2O_CMD_SW_UPLOAD		0xAB
-#define	I2O_CMD_SW_REMOVE		0xAD
-#define	I2O_CMD_SYS_ENABLE		0xD1
-#define	I2O_CMD_SYS_MODIFY		0xC1
-#define	I2O_CMD_SYS_QUIESCE		0xC3
-#define	I2O_CMD_SYS_TAB_SET		0xA3
-
-/*
- * Utility Class
- */
-#define I2O_CMD_UTIL_NOP		0x00
-#define I2O_CMD_UTIL_ABORT		0x01
-#define I2O_CMD_UTIL_CLAIM		0x09
-#define I2O_CMD_UTIL_RELEASE		0x0B
-#define I2O_CMD_UTIL_PARAMS_GET		0x06
-#define I2O_CMD_UTIL_PARAMS_SET		0x05
-#define I2O_CMD_UTIL_EVT_REGISTER	0x13
-#define I2O_CMD_UTIL_EVT_ACK		0x14
-#define I2O_CMD_UTIL_CONFIG_DIALOG	0x10
-#define I2O_CMD_UTIL_DEVICE_RESERVE	0x0D
-#define I2O_CMD_UTIL_DEVICE_RELEASE	0x0F
-#define I2O_CMD_UTIL_LOCK		0x17
-#define I2O_CMD_UTIL_LOCK_RELEASE	0x19
-#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY	0x15
-
-/*
- * SCSI Host Bus Adapter Class
- */
-#define I2O_CMD_SCSI_EXEC		0x81
-#define I2O_CMD_SCSI_ABORT		0x83
-#define I2O_CMD_SCSI_BUSRESET		0x27
-
-/*
- * Bus Adapter Class
- */
-#define I2O_CMD_BUS_ADAPTER_RESET	0x85
-#define I2O_CMD_BUS_RESET		0x87
-#define I2O_CMD_BUS_SCAN		0x89
-#define I2O_CMD_BUS_QUIESCE		0x8b
-
-/*
- * Random Block Storage Class
- */
-#define I2O_CMD_BLOCK_READ		0x30
-#define I2O_CMD_BLOCK_WRITE		0x31
-#define I2O_CMD_BLOCK_CFLUSH		0x37
-#define I2O_CMD_BLOCK_MLOCK		0x49
-#define I2O_CMD_BLOCK_MUNLOCK		0x4B
-#define I2O_CMD_BLOCK_MMOUNT		0x41
-#define I2O_CMD_BLOCK_MEJECT		0x43
-#define I2O_CMD_BLOCK_POWER		0x70
-
-#define I2O_CMD_PRIVATE			0xFF
-
-/* Command status values  */
-
-#define I2O_CMD_IN_PROGRESS	0x01
-#define I2O_CMD_REJECTED	0x02
-#define I2O_CMD_FAILED		0x03
-#define I2O_CMD_COMPLETED	0x04
-
-/* I2O API function return values */
-
-#define I2O_RTN_NO_ERROR			0
-#define I2O_RTN_NOT_INIT			1
-#define I2O_RTN_FREE_Q_EMPTY			2
-#define I2O_RTN_TCB_ERROR			3
-#define I2O_RTN_TRANSACTION_ERROR		4
-#define I2O_RTN_ADAPTER_ALREADY_INIT		5
-#define I2O_RTN_MALLOC_ERROR			6
-#define I2O_RTN_ADPTR_NOT_REGISTERED		7
-#define I2O_RTN_MSG_REPLY_TIMEOUT		8
-#define I2O_RTN_NO_STATUS			9
-#define I2O_RTN_NO_FIRM_VER			10
-#define	I2O_RTN_NO_LINK_SPEED			11
-
-/* Reply message status defines for all messages */
-
-#define I2O_REPLY_STATUS_SUCCESS                    	0x00
-#define I2O_REPLY_STATUS_ABORT_DIRTY                	0x01
-#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER     	0x02
-#define	I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER		0x03
-#define	I2O_REPLY_STATUS_ERROR_DIRTY			0x04
-#define	I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER		0x05
-#define	I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER		0x06
-#define	I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY		0x08
-#define	I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER	0x09
-#define	I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER	0x0A
-#define	I2O_REPLY_STATUS_TRANSACTION_ERROR		0x0B
-#define	I2O_REPLY_STATUS_PROGRESS_REPORT		0x80
-
-/* Status codes and Error Information for Parameter functions */
-
-#define I2O_PARAMS_STATUS_SUCCESS		0x00
-#define I2O_PARAMS_STATUS_BAD_KEY_ABORT		0x01
-#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE   	0x02
-#define I2O_PARAMS_STATUS_BUFFER_FULL		0x03
-#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL	0x04
-#define I2O_PARAMS_STATUS_FIELD_UNREADABLE	0x05
-#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE	0x06
-#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS	0x07
-#define I2O_PARAMS_STATUS_INVALID_GROUP_ID	0x08
-#define I2O_PARAMS_STATUS_INVALID_OPERATION	0x09
-#define I2O_PARAMS_STATUS_NO_KEY_FIELD		0x0A
-#define I2O_PARAMS_STATUS_NO_SUCH_FIELD		0x0B
-#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP	0x0C
-#define I2O_PARAMS_STATUS_OPERATION_ERROR	0x0D
-#define I2O_PARAMS_STATUS_SCALAR_ERROR		0x0E
-#define I2O_PARAMS_STATUS_TABLE_ERROR		0x0F
-#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE	0x10
-
-/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
- * messages: Table 3-2 Detailed Status Codes.*/
-
-#define I2O_DSC_SUCCESS                        0x0000
-#define I2O_DSC_BAD_KEY                        0x0002
-#define I2O_DSC_TCL_ERROR                      0x0003
-#define I2O_DSC_REPLY_BUFFER_FULL              0x0004
-#define I2O_DSC_NO_SUCH_PAGE                   0x0005
-#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT     0x0006
-#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD     0x0007
-#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE         0x0009
-#define I2O_DSC_UNSUPPORTED_FUNCTION           0x000A
-#define I2O_DSC_DEVICE_LOCKED                  0x000B
-#define I2O_DSC_DEVICE_RESET                   0x000C
-#define I2O_DSC_INAPPROPRIATE_FUNCTION         0x000D
-#define I2O_DSC_INVALID_INITIATOR_ADDRESS      0x000E
-#define I2O_DSC_INVALID_MESSAGE_FLAGS          0x000F
-#define I2O_DSC_INVALID_OFFSET                 0x0010
-#define I2O_DSC_INVALID_PARAMETER              0x0011
-#define I2O_DSC_INVALID_REQUEST                0x0012
-#define I2O_DSC_INVALID_TARGET_ADDRESS         0x0013
-#define I2O_DSC_MESSAGE_TOO_LARGE              0x0014
-#define I2O_DSC_MESSAGE_TOO_SMALL              0x0015
-#define I2O_DSC_MISSING_PARAMETER              0x0016
-#define I2O_DSC_TIMEOUT                        0x0017
-#define I2O_DSC_UNKNOWN_ERROR                  0x0018
-#define I2O_DSC_UNKNOWN_FUNCTION               0x0019
-#define I2O_DSC_UNSUPPORTED_VERSION            0x001A
-#define I2O_DSC_DEVICE_BUSY                    0x001B
-#define I2O_DSC_DEVICE_NOT_AVAILABLE           0x001C
-
-/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed
-   Status Codes.*/
-
-#define I2O_BSA_DSC_SUCCESS               0x0000
-#define I2O_BSA_DSC_MEDIA_ERROR           0x0001
-#define I2O_BSA_DSC_ACCESS_ERROR          0x0002
-#define I2O_BSA_DSC_DEVICE_FAILURE        0x0003
-#define I2O_BSA_DSC_DEVICE_NOT_READY      0x0004
-#define I2O_BSA_DSC_MEDIA_NOT_PRESENT     0x0005
-#define I2O_BSA_DSC_MEDIA_LOCKED          0x0006
-#define I2O_BSA_DSC_MEDIA_FAILURE         0x0007
-#define I2O_BSA_DSC_PROTOCOL_FAILURE      0x0008
-#define I2O_BSA_DSC_BUS_FAILURE           0x0009
-#define I2O_BSA_DSC_ACCESS_VIOLATION      0x000A
-#define I2O_BSA_DSC_WRITE_PROTECTED       0x000B
-#define I2O_BSA_DSC_DEVICE_RESET          0x000C
-#define I2O_BSA_DSC_VOLUME_CHANGED        0x000D
-#define I2O_BSA_DSC_TIMEOUT               0x000E
-
-/* FailureStatusCodes, Table 3-3 Message Failure Codes */
-
-#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED             0x81
-#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED            0x82
-#define I2O_FSC_TRANSPORT_CONGESTION                    0x83
-#define I2O_FSC_TRANSPORT_FAILURE                       0x84
-#define I2O_FSC_TRANSPORT_STATE_ERROR                   0x85
-#define I2O_FSC_TRANSPORT_TIME_OUT                      0x86
-#define I2O_FSC_TRANSPORT_ROUTING_FAILURE               0x87
-#define I2O_FSC_TRANSPORT_INVALID_VERSION               0x88
-#define I2O_FSC_TRANSPORT_INVALID_OFFSET                0x89
-#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS             0x8A
-#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL               0x8B
-#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE               0x8C
-#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID             0x8D
-#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID          0x8E
-#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT     0x8F
-#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE               0xFF
-
-/* Device Claim Types */
-#define	I2O_CLAIM_PRIMARY					0x01000000
-#define	I2O_CLAIM_MANAGEMENT					0x02000000
-#define	I2O_CLAIM_AUTHORIZED					0x03000000
-#define	I2O_CLAIM_SECONDARY					0x04000000
-
-/* Message header defines for VersionOffset */
-#define I2OVER15	0x0001
-#define I2OVER20	0x0002
-
-/* Default is 1.5 */
-#define I2OVERSION	I2OVER15
-
-#define SGL_OFFSET_0    I2OVERSION
-#define SGL_OFFSET_4    (0x0040 | I2OVERSION)
-#define SGL_OFFSET_5    (0x0050 | I2OVERSION)
-#define SGL_OFFSET_6    (0x0060 | I2OVERSION)
-#define SGL_OFFSET_7    (0x0070 | I2OVERSION)
-#define SGL_OFFSET_8    (0x0080 | I2OVERSION)
-#define SGL_OFFSET_9    (0x0090 | I2OVERSION)
-#define SGL_OFFSET_10   (0x00A0 | I2OVERSION)
-#define SGL_OFFSET_11   (0x00B0 | I2OVERSION)
-#define SGL_OFFSET_12   (0x00C0 | I2OVERSION)
-#define SGL_OFFSET(x)   (((x)<<4) | I2OVERSION)
-
-/* Transaction Reply Lists (TRL) Control Word structure */
-#define TRL_SINGLE_FIXED_LENGTH		0x00
-#define TRL_SINGLE_VARIABLE_LENGTH	0x40
-#define TRL_MULTIPLE_FIXED_LENGTH	0x80
-
- /* msg header defines for MsgFlags */
-#define MSG_STATIC	0x0100
-#define MSG_64BIT_CNTXT	0x0200
-#define MSG_MULTI_TRANS	0x1000
-#define MSG_FAIL	0x2000
-#define MSG_FINAL	0x4000
-#define MSG_REPLY	0x8000
-
- /* minimum size msg */
-#define THREE_WORD_MSG_SIZE	0x00030000
-#define FOUR_WORD_MSG_SIZE	0x00040000
-#define FIVE_WORD_MSG_SIZE	0x00050000
-#define SIX_WORD_MSG_SIZE	0x00060000
-#define SEVEN_WORD_MSG_SIZE	0x00070000
-#define EIGHT_WORD_MSG_SIZE	0x00080000
-#define NINE_WORD_MSG_SIZE	0x00090000
-#define TEN_WORD_MSG_SIZE	0x000A0000
-#define ELEVEN_WORD_MSG_SIZE	0x000B0000
-#define I2O_MESSAGE_SIZE(x)	((x)<<16)
-
-/* special TID assignments */
-#define ADAPTER_TID		0
-#define HOST_TID		1
-
-/* outbound queue defines */
-#define I2O_MAX_OUTBOUND_MSG_FRAMES	128
-#define I2O_OUTBOUND_MSG_FRAME_SIZE	128	/* in 32-bit words */
-
-#define I2O_POST_WAIT_OK	0
-#define I2O_POST_WAIT_TIMEOUT	-ETIMEDOUT
-
-#define I2O_CONTEXT_LIST_MIN_LENGTH	15
-#define I2O_CONTEXT_LIST_USED		0x01
-#define I2O_CONTEXT_LIST_DELETED	0x02
-
-/* timeouts */
-#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE	15
-#define I2O_TIMEOUT_MESSAGE_GET		5
-#define I2O_TIMEOUT_RESET		30
-#define I2O_TIMEOUT_STATUS_GET		5
-#define I2O_TIMEOUT_LCT_GET		360
-#define I2O_TIMEOUT_SCSI_SCB_ABORT	240
-
-/* retries */
-#define I2O_HRT_GET_TRIES		3
-#define I2O_LCT_GET_TRIES		3
-
-/* defines for max_sectors and max_phys_segments */
-#define I2O_MAX_SECTORS			1024
-#define I2O_MAX_SECTORS_LIMITED		256
-#define I2O_MAX_PHYS_SEGMENTS		MAX_PHYS_SEGMENTS
-
 #endif				/* __KERNEL__ */
 #endif				/* _I2O_H */