Merge tag 'v4.11-rc5' into next

Sync up with mainline to bring in changes to input subsystem merged
through other trees.

10 files changed, 404 insertions, 45 deletions

diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 552cc1d61cc7..44412c9d26e1 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -45,7 +45,7 @@ enum abx500_adc_therm {
  * struct abx500_res_to_temp - defines one point in a temp to res curve. To
  * be used in battery packs that combines the identification resistor with a
  * NTC resistor.
- * @temp:			battery pack temperature in Celcius
+ * @temp:			battery pack temperature in Celsius
  * @resist:			NTC resistor net total resistance
  */
 struct abx500_res_to_temp {
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
index 12a5b396921e..e63681eb6c62 100644
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -279,7 +279,7 @@ enum bup_vch_sel {
  * struct res_to_temp - defines one point in a temp to res curve. To
  * be used in battery packs that combines the identification resistor with a
  * NTC resistor.
- * @temp:			battery pack temperature in Celcius
+ * @temp:			battery pack temperature in Celsius
  * @resist:			NTC resistor net total resistance
  */
 struct res_to_temp {
@@ -290,7 +290,7 @@ struct res_to_temp {
 /**
  * struct batres_vs_temp - defines one point in a temp vs battery internal
  * resistance curve.
- * @temp:			battery pack temperature in Celcius
+ * @temp:			battery pack temperature in Celsius
  * @resist:			battery internal reistance in mOhm
  */
 struct batres_vs_temp {
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index a4860bc9b73d..0d9a1ff38393 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -13,7 +13,7 @@
 
 #include <linux/regmap.h>
 
-enum {
+enum axp20x_variants {
 	AXP152_ID = 0,
 	AXP202_ID,
 	AXP209_ID,
@@ -235,10 +235,20 @@ enum {
 #define AXP22X_BATLOW_THRES1		0xe6
 
 /* AXP288 specific registers */
+#define AXP288_POWER_REASON		0x02
+#define AXP288_BC_GLOBAL		0x2c
+#define AXP288_BC_VBUS_CNTL		0x2d
+#define AXP288_BC_USB_STAT		0x2e
+#define AXP288_BC_DET_STAT		0x2f
 #define AXP288_PMIC_ADC_H               0x56
 #define AXP288_PMIC_ADC_L               0x57
+#define AXP288_TS_ADC_H			0x58
+#define AXP288_TS_ADC_L			0x59
+#define AXP288_GP_ADC_H			0x5a
+#define AXP288_GP_ADC_L			0x5b
 #define AXP288_ADC_TS_PIN_CTRL          0x84
-#define AXP288_PMIC_ADC_EN              0x84
+#define AXP288_RT_BATT_V_H		0xa0
+#define AXP288_RT_BATT_V_L		0xa1
 
 /* Fuel Gauge */
 #define AXP288_FG_RDC1_REG          0xba
@@ -515,14 +525,10 @@ enum axp809_irqs {
 	AXP809_IRQ_GPIO0_INPUT,
 };
 
-#define AXP288_TS_ADC_H		0x58
-#define AXP288_TS_ADC_L		0x59
-#define AXP288_GP_ADC_H		0x5a
-#define AXP288_GP_ADC_L		0x5b
-
 struct axp20x_dev {
 	struct device			*dev;
 	int				irq;
+	unsigned long			irq_flags;
 	struct regmap			*regmap;
 	struct regmap_irq_chip_data	*regmap_irqc;
 	long				variant;
@@ -532,35 +538,6 @@ struct axp20x_dev {
 	const struct regmap_irq_chip	*regmap_irq_chip;
 };
 
-#define BATTID_LEN				64
-#define OCV_CURVE_SIZE			32
-#define MAX_THERM_CURVE_SIZE	25
-#define PD_DEF_MIN_TEMP			0
-#define PD_DEF_MAX_TEMP			55
-
-struct axp20x_fg_pdata {
-	char battid[BATTID_LEN + 1];
-	int design_cap;
-	int min_volt;
-	int max_volt;
-	int max_temp;
-	int min_temp;
-	int cap1;
-	int cap0;
-	int rdc1;
-	int rdc0;
-	int ocv_curve[OCV_CURVE_SIZE];
-	int tcsz;
-	int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
-};
-
-struct axp20x_chrg_pdata {
-	int max_cc;
-	int max_cv;
-	int def_cc;
-	int def_cv;
-};
-
 struct axp288_extcon_pdata {
 	/* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */
 	struct gpio_desc *gpio_mux_cntl;
@@ -611,7 +588,7 @@ int axp20x_match_device(struct axp20x_dev *axp20x);
 int axp20x_device_probe(struct axp20x_dev *axp20x);
 
 /**
- * axp20x_device_probe(): Remove a axp20x device
+ * axp20x_device_remove(): Remove a axp20x device
  *
  * @axp20x: axp20x device to remove
  *
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index f62043a75f43..7a01c94496f1 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -103,6 +103,7 @@ struct cros_ec_command {
  * @din_size: size of din buffer to allocate (zero to use static din)
  * @dout_size: size of dout buffer to allocate (zero to use static dout)
  * @wake_enabled: true if this device can wake the system from sleep
+ * @suspended: true if this device had been suspended
  * @cmd_xfer: send command to EC and get response
  *     Returns the number of bytes received if the communication succeeded, but
  *     that doesn't mean the EC was happy with the command. The caller
@@ -136,6 +137,7 @@ struct cros_ec_device {
 	int din_size;
 	int dout_size;
 	bool wake_enabled;
+	bool suspended;
 	int (*cmd_xfer)(struct cros_ec_device *ec,
 			struct cros_ec_command *msg);
 	int (*pkt_xfer)(struct cros_ec_device *ec,
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 3ceebf6b9afb..c93e7e0300ef 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1441,7 +1441,8 @@ enum motionsensor_type {
 	MOTIONSENSE_TYPE_PROX = 3,
 	MOTIONSENSE_TYPE_LIGHT = 4,
 	MOTIONSENSE_TYPE_ACTIVITY = 5,
-	MOTIONSENSE_TYPE_MAX
+	MOTIONSENSE_TYPE_BARO = 6,
+	MOTIONSENSE_TYPE_MAX,
 };
 
 /* List of motion sensor locations. */
@@ -2551,6 +2552,20 @@ struct ec_params_ext_power_current_limit {
 	uint32_t limit; /* in mA */
 } __packed;
 
+/* Inform the EC when entering a sleep state */
+#define EC_CMD_HOST_SLEEP_EVENT 0xa9
+
+enum host_sleep_event {
+	HOST_SLEEP_EVENT_S3_SUSPEND   = 1,
+	HOST_SLEEP_EVENT_S3_RESUME    = 2,
+	HOST_SLEEP_EVENT_S0IX_SUSPEND = 3,
+	HOST_SLEEP_EVENT_S0IX_RESUME  = 4
+};
+
+struct ec_params_host_sleep_event {
+	uint8_t sleep_event;
+} __packed;
+
 /*****************************************************************************/
 /* Smart battery pass-through */
 
diff --git a/include/linux/mfd/lpc_ich.h b/include/linux/mfd/lpc_ich.h
index 2b300b44f994..fba8fcb54f8c 100644
--- a/include/linux/mfd/lpc_ich.h
+++ b/include/linux/mfd/lpc_ich.h
@@ -20,6 +20,8 @@
 #ifndef LPC_ICH_H
 #define LPC_ICH_H
 
+#include <linux/platform_data/intel-spi.h>
+
 /* GPIO resources */
 #define ICH_RES_GPIO	0
 #define ICH_RES_GPE0	1
@@ -40,6 +42,7 @@ struct lpc_ich_info {
 	char name[32];
 	unsigned int iTCO_version;
 	unsigned int gpio_version;
+	enum intel_spi_type spi_type;
 	u8 use_gpio;
 };
 
diff --git a/include/linux/mfd/motorola-cpcap.h b/include/linux/mfd/motorola-cpcap.h
new file mode 100644
index 000000000000..b4031c2b2214
--- /dev/null
+++ b/include/linux/mfd/motorola-cpcap.h
@@ -0,0 +1,292 @@
+/*
+ * The register defines are based on earlier cpcap.h in Motorola Linux kernel
+ * tree.
+ *
+ * Copyright (C) 2007-2009 Motorola, Inc.
+ *
+ * Rewritten for the real register offsets instead of enumeration
+ * to make the defines usable with Linux kernel regmap support
+ *
+ * Copyright (C) 2016 Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CPCAP_VENDOR_ST		0
+#define CPCAP_VENDOR_TI		1
+
+#define CPCAP_REVISION_MAJOR(r)	(((r) >> 4) + 1)
+#define CPCAP_REVISION_MINOR(r)	((r) & 0xf)
+
+#define CPCAP_REVISION_1_0	0x08
+#define CPCAP_REVISION_1_1	0x09
+#define CPCAP_REVISION_2_0	0x10
+#define CPCAP_REVISION_2_1	0x11
+
+/* CPCAP registers */
+#define CPCAP_REG_INT1		0x0000	/* Interrupt 1 */
+#define CPCAP_REG_INT2		0x0004	/* Interrupt 2 */
+#define CPCAP_REG_INT3		0x0008	/* Interrupt 3 */
+#define CPCAP_REG_INT4		0x000c	/* Interrupt 4 */
+#define CPCAP_REG_INTM1		0x0010	/* Interrupt Mask 1 */
+#define CPCAP_REG_INTM2		0x0014	/* Interrupt Mask 2 */
+#define CPCAP_REG_INTM3		0x0018	/* Interrupt Mask 3 */
+#define CPCAP_REG_INTM4		0x001c	/* Interrupt Mask 4 */
+#define CPCAP_REG_INTS1		0x0020	/* Interrupt Sense 1 */
+#define CPCAP_REG_INTS2		0x0024	/* Interrupt Sense 2 */
+#define CPCAP_REG_INTS3		0x0028	/* Interrupt Sense 3 */
+#define CPCAP_REG_INTS4		0x002c	/* Interrupt Sense 4 */
+#define CPCAP_REG_ASSIGN1	0x0030	/* Resource Assignment 1 */
+#define CPCAP_REG_ASSIGN2	0x0034	/* Resource Assignment 2 */
+#define CPCAP_REG_ASSIGN3	0x0038	/* Resource Assignment 3 */
+#define CPCAP_REG_ASSIGN4	0x003c	/* Resource Assignment 4 */
+#define CPCAP_REG_ASSIGN5	0x0040	/* Resource Assignment 5 */
+#define CPCAP_REG_ASSIGN6	0x0044	/* Resource Assignment 6 */
+#define CPCAP_REG_VERSC1	0x0048	/* Version Control 1 */
+#define CPCAP_REG_VERSC2	0x004c	/* Version Control 2 */
+
+#define CPCAP_REG_MI1		0x0200	/* Macro Interrupt 1 */
+#define CPCAP_REG_MIM1		0x0204	/* Macro Interrupt Mask 1 */
+#define CPCAP_REG_MI2		0x0208	/* Macro Interrupt 2 */
+#define CPCAP_REG_MIM2		0x020c	/* Macro Interrupt Mask 2 */
+#define CPCAP_REG_UCC1		0x0210	/* UC Control 1 */
+#define CPCAP_REG_UCC2		0x0214	/* UC Control 2 */
+
+#define CPCAP_REG_PC1		0x021c	/* Power Cut 1 */
+#define CPCAP_REG_PC2		0x0220	/* Power Cut 2 */
+#define CPCAP_REG_BPEOL		0x0224	/* BP and EOL */
+#define CPCAP_REG_PGC		0x0228	/* Power Gate and Control */
+#define CPCAP_REG_MT1		0x022c	/* Memory Transfer 1 */
+#define CPCAP_REG_MT2		0x0230	/* Memory Transfer 2 */
+#define CPCAP_REG_MT3		0x0234	/* Memory Transfer 3 */
+#define CPCAP_REG_PF		0x0238	/* Print Format */
+
+#define CPCAP_REG_SCC		0x0400	/* System Clock Control */
+#define CPCAP_REG_SW1		0x0404	/* Stop Watch 1 */
+#define CPCAP_REG_SW2		0x0408	/* Stop Watch 2 */
+#define CPCAP_REG_UCTM		0x040c	/* UC Turbo Mode */
+#define CPCAP_REG_TOD1		0x0410	/* Time of Day 1 */
+#define CPCAP_REG_TOD2		0x0414	/* Time of Day 2 */
+#define CPCAP_REG_TODA1		0x0418	/* Time of Day Alarm 1 */
+#define CPCAP_REG_TODA2		0x041c	/* Time of Day Alarm 2 */
+#define CPCAP_REG_DAY		0x0420	/* Day */
+#define CPCAP_REG_DAYA		0x0424	/* Day Alarm */
+#define CPCAP_REG_VAL1		0x0428	/* Validity 1 */
+#define CPCAP_REG_VAL2		0x042c	/* Validity 2 */
+
+#define CPCAP_REG_SDVSPLL	0x0600	/* Switcher DVS and PLL */
+#define CPCAP_REG_SI2CC1	0x0604	/* Switcher I2C Control 1 */
+#define CPCAP_REG_Si2CC2	0x0608	/* Switcher I2C Control 2 */
+#define CPCAP_REG_S1C1		0x060c	/* Switcher 1 Control 1 */
+#define CPCAP_REG_S1C2		0x0610	/* Switcher 1 Control 2 */
+#define CPCAP_REG_S2C1		0x0614	/* Switcher 2 Control 1 */
+#define CPCAP_REG_S2C2		0x0618	/* Switcher 2 Control 2 */
+#define CPCAP_REG_S3C		0x061c	/* Switcher 3 Control */
+#define CPCAP_REG_S4C1		0x0620	/* Switcher 4 Control 1 */
+#define CPCAP_REG_S4C2		0x0624	/* Switcher 4 Control 2 */
+#define CPCAP_REG_S5C		0x0628	/* Switcher 5 Control */
+#define CPCAP_REG_S6C		0x062c	/* Switcher 6 Control */
+#define CPCAP_REG_VCAMC		0x0630	/* VCAM Control */
+#define CPCAP_REG_VCSIC		0x0634	/* VCSI Control */
+#define CPCAP_REG_VDACC		0x0638	/* VDAC Control */
+#define CPCAP_REG_VDIGC		0x063c	/* VDIG Control */
+#define CPCAP_REG_VFUSEC	0x0640	/* VFUSE Control */
+#define CPCAP_REG_VHVIOC	0x0644	/* VHVIO Control */
+#define CPCAP_REG_VSDIOC	0x0648	/* VSDIO Control */
+#define CPCAP_REG_VPLLC		0x064c	/* VPLL Control */
+#define CPCAP_REG_VRF1C		0x0650	/* VRF1 Control */
+#define CPCAP_REG_VRF2C		0x0654	/* VRF2 Control */
+#define CPCAP_REG_VRFREFC	0x0658	/* VRFREF Control */
+#define CPCAP_REG_VWLAN1C	0x065c	/* VWLAN1 Control */
+#define CPCAP_REG_VWLAN2C	0x0660	/* VWLAN2 Control */
+#define CPCAP_REG_VSIMC		0x0664	/* VSIM Control */
+#define CPCAP_REG_VVIBC		0x0668	/* VVIB Control */
+#define CPCAP_REG_VUSBC		0x066c	/* VUSB Control */
+#define CPCAP_REG_VUSBINT1C	0x0670	/* VUSBINT1 Control */
+#define CPCAP_REG_VUSBINT2C	0x0674	/* VUSBINT2 Control */
+#define CPCAP_REG_URT		0x0678	/* Useroff Regulator Trigger */
+#define CPCAP_REG_URM1		0x067c	/* Useroff Regulator Mask 1 */
+#define CPCAP_REG_URM2		0x0680	/* Useroff Regulator Mask 2 */
+
+#define CPCAP_REG_VAUDIOC	0x0800	/* VAUDIO Control */
+#define CPCAP_REG_CC		0x0804	/* Codec Control */
+#define CPCAP_REG_CDI		0x0808	/* Codec Digital Interface */
+#define CPCAP_REG_SDAC		0x080c	/* Stereo DAC */
+#define CPCAP_REG_SDACDI	0x0810	/* Stereo DAC Digital Interface */
+#define CPCAP_REG_TXI		0x0814	/* TX Inputs */
+#define CPCAP_REG_TXMP		0x0818	/* TX MIC PGA's */
+#define CPCAP_REG_RXOA		0x081c	/* RX Output Amplifiers */
+#define CPCAP_REG_RXVC		0x0820	/* RX Volume Control */
+#define CPCAP_REG_RXCOA		0x0824	/* RX Codec to Output Amps */
+#define CPCAP_REG_RXSDOA	0x0828	/* RX Stereo DAC to Output Amps */
+#define CPCAP_REG_RXEPOA	0x082c	/* RX External PGA to Output Amps */
+#define CPCAP_REG_RXLL		0x0830	/* RX Low Latency */
+#define CPCAP_REG_A2LA		0x0834	/* A2 Loudspeaker Amplifier */
+#define CPCAP_REG_MIPIS1	0x0838	/* MIPI Slimbus 1 */
+#define CPCAP_REG_MIPIS2	0x083c	/* MIPI Slimbus 2 */
+#define CPCAP_REG_MIPIS3	0x0840	/* MIPI Slimbus 3. */
+#define CPCAP_REG_LVAB		0x0844	/* LMR Volume and A4 Balanced. */
+
+#define CPCAP_REG_CCC1		0x0a00	/* Coulomb Counter Control 1 */
+#define CPCAP_REG_CRM		0x0a04	/* Charger and Reverse Mode */
+#define CPCAP_REG_CCCC2		0x0a08	/* Coincell and Coulomb Ctr Ctrl 2 */
+#define CPCAP_REG_CCS1		0x0a0c	/* Coulomb Counter Sample 1 */
+#define CPCAP_REG_CCS2		0x0a10	/* Coulomb Counter Sample 2 */
+#define CPCAP_REG_CCA1		0x0a14	/* Coulomb Counter Accumulator 1 */
+#define CPCAP_REG_CCA2		0x0a18	/* Coulomb Counter Accumulator 2 */
+#define CPCAP_REG_CCM		0x0a1c	/* Coulomb Counter Mode */
+#define CPCAP_REG_CCO		0x0a20	/* Coulomb Counter Offset */
+#define CPCAP_REG_CCI		0x0a24	/* Coulomb Counter Integrator */
+
+#define CPCAP_REG_ADCC1		0x0c00	/* A/D Converter Configuration 1 */
+#define CPCAP_REG_ADCC2		0x0c04	/* A/D Converter Configuration 2 */
+#define CPCAP_REG_ADCD0		0x0c08	/* A/D Converter Data 0 */
+#define CPCAP_REG_ADCD1		0x0c0c	/* A/D Converter Data 1 */
+#define CPCAP_REG_ADCD2		0x0c10	/* A/D Converter Data 2 */
+#define CPCAP_REG_ADCD3		0x0c14	/* A/D Converter Data 3 */
+#define CPCAP_REG_ADCD4		0x0c18	/* A/D Converter Data 4 */
+#define CPCAP_REG_ADCD5		0x0c1c	/* A/D Converter Data 5 */
+#define CPCAP_REG_ADCD6		0x0c20	/* A/D Converter Data 6 */
+#define CPCAP_REG_ADCD7		0x0c24	/* A/D Converter Data 7 */
+#define CPCAP_REG_ADCAL1	0x0c28	/* A/D Converter Calibration 1 */
+#define CPCAP_REG_ADCAL2	0x0c2c	/* A/D Converter Calibration 2 */
+
+#define CPCAP_REG_USBC1		0x0e00	/* USB Control 1 */
+#define CPCAP_REG_USBC2		0x0e04	/* USB Control 2 */
+#define CPCAP_REG_USBC3		0x0e08	/* USB Control 3 */
+#define CPCAP_REG_UVIDL		0x0e0c	/* ULPI Vendor ID Low */
+#define CPCAP_REG_UVIDH		0x0e10	/* ULPI Vendor ID High */
+#define CPCAP_REG_UPIDL		0x0e14	/* ULPI Product ID Low */
+#define CPCAP_REG_UPIDH		0x0e18	/* ULPI Product ID High */
+#define CPCAP_REG_UFC1		0x0e1c	/* ULPI Function Control 1 */
+#define CPCAP_REG_UFC2		0x0e20	/* ULPI Function Control 2 */
+#define CPCAP_REG_UFC3		0x0e24	/* ULPI Function Control 3 */
+#define CPCAP_REG_UIC1		0x0e28	/* ULPI Interface Control 1 */
+#define CPCAP_REG_UIC2		0x0e2c	/* ULPI Interface Control 2 */
+#define CPCAP_REG_UIC3		0x0e30	/* ULPI Interface Control 3 */
+#define CPCAP_REG_USBOTG1	0x0e34	/* USB OTG Control 1 */
+#define CPCAP_REG_USBOTG2	0x0e38	/* USB OTG Control 2 */
+#define CPCAP_REG_USBOTG3	0x0e3c	/* USB OTG Control 3 */
+#define CPCAP_REG_UIER1		0x0e40	/* USB Interrupt Enable Rising 1 */
+#define CPCAP_REG_UIER2		0x0e44	/* USB Interrupt Enable Rising 2 */
+#define CPCAP_REG_UIER3		0x0e48	/* USB Interrupt Enable Rising 3 */
+#define CPCAP_REG_UIEF1		0x0e4c	/* USB Interrupt Enable Falling 1 */
+#define CPCAP_REG_UIEF2		0x0e50	/* USB Interrupt Enable Falling 1 */
+#define CPCAP_REG_UIEF3		0x0e54	/* USB Interrupt Enable Falling 1 */
+#define CPCAP_REG_UIS		0x0e58	/* USB Interrupt Status */
+#define CPCAP_REG_UIL		0x0e5c	/* USB Interrupt Latch */
+#define CPCAP_REG_USBD		0x0e60	/* USB Debug */
+#define CPCAP_REG_SCR1		0x0e64	/* Scratch 1 */
+#define CPCAP_REG_SCR2		0x0e68	/* Scratch 2 */
+#define CPCAP_REG_SCR3		0x0e6c	/* Scratch 3 */
+
+#define CPCAP_REG_VMC		0x0eac	/* Video Mux Control */
+#define CPCAP_REG_OWDC		0x0eb0	/* One Wire Device Control */
+#define CPCAP_REG_GPIO0		0x0eb4	/* GPIO 0 Control */
+
+#define CPCAP_REG_GPIO1		0x0ebc	/* GPIO 1 Control */
+
+#define CPCAP_REG_GPIO2		0x0ec4	/* GPIO 2 Control */
+
+#define CPCAP_REG_GPIO3		0x0ecc	/* GPIO 3 Control */
+
+#define CPCAP_REG_GPIO4		0x0ed4	/* GPIO 4 Control */
+
+#define CPCAP_REG_GPIO5		0x0edc	/* GPIO 5 Control */
+
+#define CPCAP_REG_GPIO6		0x0ee4	/* GPIO 6 Control */
+
+#define CPCAP_REG_MDLC		0x1000	/* Main Display Lighting Control */
+#define CPCAP_REG_KLC		0x1004	/* Keypad Lighting Control */
+#define CPCAP_REG_ADLC		0x1008	/* Aux Display Lighting Control */
+#define CPCAP_REG_REDC		0x100c	/* Red Triode Control */
+#define CPCAP_REG_GREENC	0x1010	/* Green Triode Control */
+#define CPCAP_REG_BLUEC		0x1014	/* Blue Triode Control */
+#define CPCAP_REG_CFC		0x1018	/* Camera Flash Control */
+#define CPCAP_REG_ABC		0x101c	/* Adaptive Boost Control */
+#define CPCAP_REG_BLEDC		0x1020	/* Bluetooth LED Control */
+#define CPCAP_REG_CLEDC		0x1024	/* Camera Privacy LED Control */
+
+#define CPCAP_REG_OW1C		0x1200	/* One Wire 1 Command */
+#define CPCAP_REG_OW1D		0x1204	/* One Wire 1 Data */
+#define CPCAP_REG_OW1I		0x1208	/* One Wire 1 Interrupt */
+#define CPCAP_REG_OW1IE		0x120c	/* One Wire 1 Interrupt Enable */
+
+#define CPCAP_REG_OW1		0x1214	/* One Wire 1 Control */
+
+#define CPCAP_REG_OW2C		0x1220	/* One Wire 2 Command */
+#define CPCAP_REG_OW2D		0x1224	/* One Wire 2 Data */
+#define CPCAP_REG_OW2I		0x1228	/* One Wire 2 Interrupt */
+#define CPCAP_REG_OW2IE		0x122c	/* One Wire 2 Interrupt Enable */
+
+#define CPCAP_REG_OW2		0x1234	/* One Wire 2 Control */
+
+#define CPCAP_REG_OW3C		0x1240	/* One Wire 3 Command */
+#define CPCAP_REG_OW3D		0x1244	/* One Wire 3 Data */
+#define CPCAP_REG_OW3I		0x1248	/* One Wire 3 Interrupt */
+#define CPCAP_REG_OW3IE		0x124c	/* One Wire 3 Interrupt Enable */
+
+#define CPCAP_REG_OW3		0x1254	/* One Wire 3 Control */
+#define CPCAP_REG_GCAIC		0x1258	/* GCAI Clock Control */
+#define CPCAP_REG_GCAIM		0x125c	/* GCAI GPIO Mode */
+#define CPCAP_REG_LGDIR		0x1260	/* LMR GCAI GPIO Direction */
+#define CPCAP_REG_LGPU		0x1264	/* LMR GCAI GPIO Pull-up */
+#define CPCAP_REG_LGPIN		0x1268	/* LMR GCAI GPIO Pin */
+#define CPCAP_REG_LGMASK	0x126c	/* LMR GCAI GPIO Mask */
+#define CPCAP_REG_LDEB		0x1270	/* LMR Debounce Settings */
+#define CPCAP_REG_LGDET		0x1274	/* LMR GCAI Detach Detect */
+#define CPCAP_REG_LMISC		0x1278	/* LMR Misc Bits */
+#define CPCAP_REG_LMACE		0x127c	/* LMR Mace IC Support */
+
+#define CPCAP_REG_TEST		0x7c00	/* Test */
+
+#define CPCAP_REG_ST_TEST1	0x7d08	/* ST Test1 */
+
+#define CPCAP_REG_ST_TEST2	0x7d18	/* ST Test2 */
+
+/*
+ * Helpers for child devices to check the revision and vendor.
+ *
+ * REVISIT: No documentation for the bits below, please update
+ * to use proper names for defines when available.
+ */
+
+static inline int cpcap_get_revision(struct device *dev,
+				     struct regmap *regmap,
+				     u16 *revision)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(regmap, CPCAP_REG_VERSC1, &val);
+	if (ret) {
+		dev_err(dev, "Could not read revision\n");
+
+		return ret;
+	}
+
+	*revision = ((val >> 3) & 0x7) | ((val << 3) & 0x38);
+
+	return 0;
+}
+
+static inline int cpcap_get_vendor(struct device *dev,
+				   struct regmap *regmap,
+				   u16 *vendor)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(regmap, CPCAP_REG_VERSC1, &val);
+	if (ret) {
+		dev_err(dev, "Could not read vendor\n");
+
+		return ret;
+	}
+
+	*vendor = (val >> 6) & 0x7;
+
+	return 0;
+}
diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h
new file mode 100644
index 000000000000..d0300045f04a
--- /dev/null
+++ b/include/linux/mfd/stm32-timers.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) STMicroelectronics 2016
+ *
+ * Author: Benjamin Gaignard <benjamin.gaignard@st.com>
+ *
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#ifndef _LINUX_STM32_GPTIMER_H_
+#define _LINUX_STM32_GPTIMER_H_
+
+#include <linux/clk.h>
+#include <linux/regmap.h>
+
+#define TIM_CR1		0x00	/* Control Register 1      */
+#define TIM_CR2		0x04	/* Control Register 2      */
+#define TIM_SMCR	0x08	/* Slave mode control reg  */
+#define TIM_DIER	0x0C	/* DMA/interrupt register  */
+#define TIM_SR		0x10	/* Status register	   */
+#define TIM_EGR		0x14	/* Event Generation Reg    */
+#define TIM_CCMR1	0x18	/* Capt/Comp 1 Mode Reg    */
+#define TIM_CCMR2	0x1C	/* Capt/Comp 2 Mode Reg    */
+#define TIM_CCER	0x20	/* Capt/Comp Enable Reg    */
+#define TIM_PSC		0x28	/* Prescaler               */
+#define TIM_ARR		0x2c	/* Auto-Reload Register    */
+#define TIM_CCR1	0x34	/* Capt/Comp Register 1    */
+#define TIM_CCR2	0x38	/* Capt/Comp Register 2    */
+#define TIM_CCR3	0x3C	/* Capt/Comp Register 3    */
+#define TIM_CCR4	0x40	/* Capt/Comp Register 4    */
+#define TIM_BDTR	0x44	/* Break and Dead-Time Reg */
+
+#define TIM_CR1_CEN	BIT(0)	/* Counter Enable	   */
+#define TIM_CR1_ARPE	BIT(7)	/* Auto-reload Preload Ena */
+#define TIM_CR2_MMS	(BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */
+#define TIM_SMCR_SMS	(BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */
+#define TIM_SMCR_TS	(BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */
+#define TIM_DIER_UIE	BIT(0)	/* Update interrupt	   */
+#define TIM_SR_UIF	BIT(0)	/* Update interrupt flag   */
+#define TIM_EGR_UG	BIT(0)	/* Update Generation       */
+#define TIM_CCMR_PE	BIT(3)	/* Channel Preload Enable  */
+#define TIM_CCMR_M1	(BIT(6) | BIT(5))  /* Channel PWM Mode 1 */
+#define TIM_CCER_CC1E	BIT(0)	/* Capt/Comp 1  out Ena    */
+#define TIM_CCER_CC1P	BIT(1)	/* Capt/Comp 1  Polarity   */
+#define TIM_CCER_CC1NE	BIT(2)	/* Capt/Comp 1N out Ena    */
+#define TIM_CCER_CC1NP	BIT(3)	/* Capt/Comp 1N Polarity   */
+#define TIM_CCER_CC2E	BIT(4)	/* Capt/Comp 2  out Ena    */
+#define TIM_CCER_CC3E	BIT(8)	/* Capt/Comp 3  out Ena    */
+#define TIM_CCER_CC4E	BIT(12)	/* Capt/Comp 4  out Ena    */
+#define TIM_CCER_CCXE	(BIT(0) | BIT(4) | BIT(8) | BIT(12))
+#define TIM_BDTR_BKE	BIT(12) /* Break input enable	   */
+#define TIM_BDTR_BKP	BIT(13) /* Break input polarity	   */
+#define TIM_BDTR_AOE	BIT(14)	/* Automatic Output Enable */
+#define TIM_BDTR_MOE	BIT(15)	/* Main Output Enable      */
+#define TIM_BDTR_BKF	(BIT(16) | BIT(17) | BIT(18) | BIT(19))
+#define TIM_BDTR_BK2F	(BIT(20) | BIT(21) | BIT(22) | BIT(23))
+#define TIM_BDTR_BK2E	BIT(24) /* Break 2 input enable	   */
+#define TIM_BDTR_BK2P	BIT(25) /* Break 2 input polarity  */
+
+#define MAX_TIM_PSC		0xFFFF
+#define TIM_CR2_MMS_SHIFT	4
+#define TIM_SMCR_TS_SHIFT	4
+#define TIM_BDTR_BKF_MASK	0xF
+#define TIM_BDTR_BKF_SHIFT	16
+#define TIM_BDTR_BK2F_SHIFT	20
+
+struct stm32_timers {
+	struct clk *clk;
+	struct regmap *regmap;
+	u32 max_arr;
+};
+#endif
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index fba44abd05ba..a1520d88ebf3 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -94,10 +94,8 @@
  */
 #define TMIO_MMC_HAVE_CMD12_CTRL	(1 << 7)
 
-/*
- * Some controllers needs to set 1 on SDIO status reserved bits
- */
-#define TMIO_MMC_SDIO_STATUS_QUIRK	(1 << 8)
+/* Controller has some SDIO status bits which must be 1 */
+#define TMIO_MMC_SDIO_STATUS_SETBITS	(1 << 8)
 
 /*
  * Some controllers have a 32-bit wide data port register
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 6483a6fdce59..ffb21e79204d 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -134,6 +134,7 @@
 
 /* RTC_CTRL_REG bitfields */
 #define TPS65910_RTC_CTRL_STOP_RTC			0x01 /*0=stop, 1=run */
+#define TPS65910_RTC_CTRL_AUTO_COMP			0x04
 #define TPS65910_RTC_CTRL_GET_TIME			0x40
 
 /* RTC_STATUS_REG bitfields */