Merge tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and
   TI's TPS65090 and TPS65217.
 - New variants support (8420, 8520 ab9540), cleanups and bug fixes for
   the abx500 and db8500 ST-E chipsets.
 - Some minor fixes and update for the wm8994 from Mark.
 - The beginning of a long term TWL cleanup effort coming from the TI
   folks.
 - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997
   drivers.

Fix up trivial conflicts due to duplicate patches and header file
cleanups (<linux/device.h> removal etc).

* tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits)
  gpio/twl: Add DT support to gpio-twl4030 driver
  gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support
  mfd: Detach twl6040 from the pmic mfd driver
  mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups
  mfd: Micro-optimization on twl4030 IRQ handler
  mfd: Make twl4030 SIH SPARSE_IRQ capable
  mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
  mfd: Remove references already defineid in header file from twl-core
  mfd: Remove unneeded header from twl-core
  mfd: Make twl-core not depend on pdata->irq_base/end
  ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files
  mfd: Return twl6030_mmc_card_detect IRQ for board setup
  Revert "mfd: Add platform data for MAX8997 haptic driver"
  mfd: Add support for TPS65090
  mfd: Add some da9052-i2c section annotations
  mfd: Build rtc5t583 only if I2C config is selected to y.
  mfd: Add anatop mfd driver
  mfd: Fix compilation error in tps65910.h
  mfd: Add 8420 variant to db8500-prcmu
  mfd: Add 8520 PRCMU variant to db8500-prcmu
  ...

16 files changed, 1410 insertions, 159 deletions

diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h
index 92be3476c9f5..84d071ade1d8 100644
--- a/include/linux/mfd/88pm860x.h
+++ b/include/linux/mfd/88pm860x.h
@@ -263,6 +263,22 @@ enum {
 #define PM8607_PD_PREBIAS_MASK		(0x1F << 0)
 #define PM8607_PD_PRECHG_MASK		(7 << 5)
 
+#define PM8606_REF_GP_OSC_OFF         0
+#define PM8606_REF_GP_OSC_ON          1
+#define PM8606_REF_GP_OSC_UNKNOWN     2
+
+/* Clients of reference group and 8MHz oscillator in 88PM8606 */
+enum pm8606_ref_gp_and_osc_clients {
+	REF_GP_NO_CLIENTS       = 0,
+	WLED1_DUTY              = (1<<0), /*PF 0x02.7:0*/
+	WLED2_DUTY              = (1<<1), /*PF 0x04.7:0*/
+	WLED3_DUTY              = (1<<2), /*PF 0x06.7:0*/
+	RGB1_ENABLE             = (1<<3), /*PF 0x07.1*/
+	RGB2_ENABLE             = (1<<4), /*PF 0x07.2*/
+	LDO_VBR_EN              = (1<<5), /*PF 0x12.0*/
+	REF_GP_MAX_CLIENT       = 0xFFFF
+};
+
 /* Interrupt Number in 88PM8607 */
 enum {
 	PM8607_IRQ_ONKEY,
@@ -298,6 +314,7 @@ enum {
 struct pm860x_chip {
 	struct device		*dev;
 	struct mutex		irq_lock;
+	struct mutex		osc_lock;
 	struct i2c_client	*client;
 	struct i2c_client	*companion;	/* companion chip client */
 	struct regmap           *regmap;
@@ -305,12 +322,15 @@ struct pm860x_chip {
 
 	int			buck3_double;	/* DVC ramp slope double */
 	unsigned short		companion_addr;
+	unsigned short		osc_vote;
 	int			id;
 	int			irq_mode;
 	int			irq_base;
 	int			core_irq;
 	unsigned char		chip_version;
+	unsigned char		osc_status;
 
+	unsigned int            wakeup_flag;
 };
 
 enum {
@@ -369,6 +389,9 @@ struct pm860x_platform_data {
 	int		num_regulators;
 };
 
+extern int pm8606_osc_enable(struct pm860x_chip *, unsigned short);
+extern int pm8606_osc_disable(struct pm860x_chip *, unsigned short);
+
 extern int pm860x_reg_read(struct i2c_client *, int);
 extern int pm860x_reg_write(struct i2c_client *, int, unsigned char);
 extern int pm860x_bulk_read(struct i2c_client *, int, int, unsigned char *);
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index e20dd6ead1d0..5fa697477b71 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -34,13 +34,6 @@ struct device;
 #define AB5500_1_1	0x21
 #define AB5500_2_0	0x24
 
-/* AB8500 CIDs*/
-#define AB8500_CUT1P0	0x10
-#define AB8500_CUT1P1	0x11
-#define AB8500_CUT2P0	0x20
-#define AB8500_CUT3P0	0x30
-#define AB8500_CUT3P3	0x33
-
 /*
  * AB3100, EVENTA1, A2 and A3 event register flags
  * these are catenated into a single 32-bit flag in the code
diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h
index 488a8c920a29..2387c207ea86 100644
--- a/include/linux/mfd/abx500/ab8500-gpio.h
+++ b/include/linux/mfd/abx500/ab8500-gpio.h
@@ -10,12 +10,14 @@
 
 /*
  * Platform data to register a block: only the initial gpio/irq number.
+ * Array sizes are large enough to contain all AB8500 and AB9540 GPIO
+ * registers.
  */
 
 struct ab8500_gpio_platform_data {
 	int gpio_base;
 	u32 irq_base;
-	u8  config_reg[7];
+	u8  config_reg[8];
 };
 
 #endif /* _AB8500_GPIO_H */
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index 10da0291f8f8..10eb50973c39 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -71,6 +71,13 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
 #define AB8500_SWATCTRL			0x230
 #define AB8500_HIQCLKCTRL		0x232
 #define AB8500_VSIMSYSCLKCTRL		0x233
+#define AB9540_SYSCLK12BUFCTRL		0x234
+#define AB9540_SYSCLK12CONFCTRL		0x235
+#define AB9540_SYSCLK12BUFCTRL2		0x236
+#define AB9540_SYSCLK12BUF1VALID	0x237
+#define AB9540_SYSCLK12BUF2VALID	0x238
+#define AB9540_SYSCLK12BUF3VALID	0x239
+#define AB9540_SYSCLK12BUF4VALID	0x23A
 
 /* Bits */
 #define AB8500_TURNONSTATUS_PORNVBAT BIT(0)
@@ -251,4 +258,40 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
 #define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6)
 #define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7)
 
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1ENA BIT(0)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2ENA BIT(1)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3ENA BIT(2)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4ENA BIT(3)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFENA_MASK 0x0F
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1STRE BIT(4)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2STRE BIT(5)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3STRE BIT(6)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4STRE BIT(7)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFSTRE_MASK 0xF0
+
+#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1)
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6)
+
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF1PDENA BIT(0)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF2PDENA BIT(1)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF3PDENA BIT(2)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF4PDENA BIT(3)
+
+#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0
+
 #endif /* __AB8500_SYSCTRL_H */
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index dca94396190d..fccc3002f271 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -12,6 +12,29 @@
 struct device;
 
 /*
+ * AB IC versions
+ *
+ * AB8500_VERSION_AB8500 should be 0xFF but will never be read as need a
+ * non-supported multi-byte I2C access via PRCMU. Set to 0x00 to ease the
+ * print of version string.
+ */
+enum ab8500_version {
+	AB8500_VERSION_AB8500 = 0x0,
+	AB8500_VERSION_AB8505 = 0x1,
+	AB8500_VERSION_AB9540 = 0x2,
+	AB8500_VERSION_AB8540 = 0x3,
+	AB8500_VERSION_UNDEFINED,
+};
+
+/* AB8500 CIDs*/
+#define AB8500_CUTEARLY	0x00
+#define AB8500_CUT1P0	0x10
+#define AB8500_CUT1P1	0x11
+#define AB8500_CUT2P0	0x20
+#define AB8500_CUT3P0	0x30
+#define AB8500_CUT3P3	0x33
+
+/*
  * AB8500 bank addresses
  */
 #define AB8500_SYS_CTRL1_BLOCK	0x1
@@ -37,30 +60,34 @@ struct device;
 
 /*
  * Interrupts
+ * Values used to index into array ab8500_irq_regoffset[] defined in
+ * drivers/mdf/ab8500-core.c
  */
-
-#define AB8500_INT_MAIN_EXT_CH_NOT_OK	0
-#define AB8500_INT_UN_PLUG_TV_DET	1
-#define AB8500_INT_PLUG_TV_DET		2
+/* Definitions for AB8500 and AB9540 */
+/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */
+#define AB8500_INT_MAIN_EXT_CH_NOT_OK	0 /* not 8505/9540 */
+#define AB8500_INT_UN_PLUG_TV_DET	1 /* not 8505/9540 */
+#define AB8500_INT_PLUG_TV_DET		2 /* not 8505/9540 */
 #define AB8500_INT_TEMP_WARM		3
 #define AB8500_INT_PON_KEY2DB_F		4
 #define AB8500_INT_PON_KEY2DB_R		5
 #define AB8500_INT_PON_KEY1DB_F		6
 #define AB8500_INT_PON_KEY1DB_R		7
+/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */
 #define AB8500_INT_BATT_OVV		8
-#define AB8500_INT_MAIN_CH_UNPLUG_DET	10
-#define AB8500_INT_MAIN_CH_PLUG_DET	11
-#define AB8500_INT_USB_ID_DET_F		12
-#define AB8500_INT_USB_ID_DET_R		13
+#define AB8500_INT_MAIN_CH_UNPLUG_DET	10 /* not 8505 */
+#define AB8500_INT_MAIN_CH_PLUG_DET	11 /* not 8505 */
 #define AB8500_INT_VBUS_DET_F		14
 #define AB8500_INT_VBUS_DET_R		15
+/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */
 #define AB8500_INT_VBUS_CH_DROP_END	16
 #define AB8500_INT_RTC_60S		17
 #define AB8500_INT_RTC_ALARM		18
 #define AB8500_INT_BAT_CTRL_INDB	20
 #define AB8500_INT_CH_WD_EXP		21
 #define AB8500_INT_VBUS_OVV		22
-#define AB8500_INT_MAIN_CH_DROP_END	23
+#define AB8500_INT_MAIN_CH_DROP_END	23 /* not 8505/9540 */
+/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */
 #define AB8500_INT_CCN_CONV_ACC		24
 #define AB8500_INT_INT_AUD		25
 #define AB8500_INT_CCEOC		26
@@ -69,7 +96,8 @@ struct device;
 #define AB8500_INT_LOW_BAT_R		29
 #define AB8500_INT_BUP_CHG_NOT_OK	30
 #define AB8500_INT_BUP_CHG_OK		31
-#define AB8500_INT_GP_HW_ADC_CONV_END	32
+/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */
+#define AB8500_INT_GP_HW_ADC_CONV_END	32 /* not 8505 */
 #define AB8500_INT_ACC_DETECT_1DB_F	33
 #define AB8500_INT_ACC_DETECT_1DB_R	34
 #define AB8500_INT_ACC_DETECT_22DB_F	35
@@ -77,38 +105,43 @@ struct device;
 #define AB8500_INT_ACC_DETECT_21DB_F	37
 #define AB8500_INT_ACC_DETECT_21DB_R	38
 #define AB8500_INT_GP_SW_ADC_CONV_END	39
-#define AB8500_INT_GPIO6R		40
-#define AB8500_INT_GPIO7R		41
-#define AB8500_INT_GPIO8R		42
-#define AB8500_INT_GPIO9R		43
+/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */
+#define AB8500_INT_GPIO6R		40 /* not 8505/9540 */
+#define AB8500_INT_GPIO7R		41 /* not 8505/9540 */
+#define AB8500_INT_GPIO8R		42 /* not 8505/9540 */
+#define AB8500_INT_GPIO9R		43 /* not 8505/9540 */
 #define AB8500_INT_GPIO10R		44
 #define AB8500_INT_GPIO11R		45
-#define AB8500_INT_GPIO12R		46
+#define AB8500_INT_GPIO12R		46 /* not 8505 */
 #define AB8500_INT_GPIO13R		47
-#define AB8500_INT_GPIO24R		48
-#define AB8500_INT_GPIO25R		49
-#define AB8500_INT_GPIO36R		50
-#define AB8500_INT_GPIO37R		51
-#define AB8500_INT_GPIO38R		52
-#define AB8500_INT_GPIO39R		53
+/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */
+#define AB8500_INT_GPIO24R		48 /* not 8505 */
+#define AB8500_INT_GPIO25R		49 /* not 8505 */
+#define AB8500_INT_GPIO36R		50 /* not 8505/9540 */
+#define AB8500_INT_GPIO37R		51 /* not 8505/9540 */
+#define AB8500_INT_GPIO38R		52 /* not 8505/9540 */
+#define AB8500_INT_GPIO39R		53 /* not 8505/9540 */
 #define AB8500_INT_GPIO40R		54
 #define AB8500_INT_GPIO41R		55
-#define AB8500_INT_GPIO6F		56
-#define AB8500_INT_GPIO7F		57
-#define AB8500_INT_GPIO8F		58
-#define AB8500_INT_GPIO9F		59
+/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */
+#define AB8500_INT_GPIO6F		56 /* not 8505/9540 */
+#define AB8500_INT_GPIO7F		57 /* not 8505/9540 */
+#define AB8500_INT_GPIO8F		58 /* not 8505/9540 */
+#define AB8500_INT_GPIO9F		59 /* not 8505/9540 */
 #define AB8500_INT_GPIO10F		60
 #define AB8500_INT_GPIO11F		61
-#define AB8500_INT_GPIO12F		62
+#define AB8500_INT_GPIO12F		62 /* not 8505 */
 #define AB8500_INT_GPIO13F		63
-#define AB8500_INT_GPIO24F		64
-#define AB8500_INT_GPIO25F		65
-#define AB8500_INT_GPIO36F		66
-#define AB8500_INT_GPIO37F		67
-#define AB8500_INT_GPIO38F		68
-#define AB8500_INT_GPIO39F		69
+/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */
+#define AB8500_INT_GPIO24F		64 /* not 8505 */
+#define AB8500_INT_GPIO25F		65 /* not 8505 */
+#define AB8500_INT_GPIO36F		66 /* not 8505/9540 */
+#define AB8500_INT_GPIO37F		67 /* not 8505/9540 */
+#define AB8500_INT_GPIO38F		68 /* not 8505/9540 */
+#define AB8500_INT_GPIO39F		69 /* not 8505/9540 */
 #define AB8500_INT_GPIO40F		70
 #define AB8500_INT_GPIO41F		71
+/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */
 #define AB8500_INT_ADP_SOURCE_ERROR	72
 #define AB8500_INT_ADP_SINK_ERROR	73
 #define AB8500_INT_ADP_PROBE_PLUG	74
@@ -116,30 +149,67 @@ struct device;
 #define AB8500_INT_ADP_SENSE_OFF	76
 #define AB8500_INT_USB_PHY_POWER_ERR	78
 #define AB8500_INT_USB_LINK_STATUS	79
+/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */
 #define AB8500_INT_BTEMP_LOW		80
 #define AB8500_INT_BTEMP_LOW_MEDIUM	81
 #define AB8500_INT_BTEMP_MEDIUM_HIGH	82
 #define AB8500_INT_BTEMP_HIGH		83
-#define AB8500_INT_USB_CHARGER_NOT_OK	89
+/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */
+#define AB8500_INT_SRP_DETECT		88
+#define AB8500_INT_USB_CHARGER_NOT_OKR	89
 #define AB8500_INT_ID_WAKEUP_R		90
 #define AB8500_INT_ID_DET_R1R		92
 #define AB8500_INT_ID_DET_R2R		93
 #define AB8500_INT_ID_DET_R3R		94
 #define AB8500_INT_ID_DET_R4R		95
+/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */
 #define AB8500_INT_ID_WAKEUP_F		96
 #define AB8500_INT_ID_DET_R1F		98
 #define AB8500_INT_ID_DET_R2F		99
 #define AB8500_INT_ID_DET_R3F		100
 #define AB8500_INT_ID_DET_R4F		101
-#define AB8500_INT_USB_CHG_DET_DONE	102
+#define AB8500_INT_CHAUTORESTARTAFTSEC  102
+#define AB8500_INT_CHSTOPBYSEC		103
+/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */
 #define AB8500_INT_USB_CH_TH_PROT_F	104
 #define AB8500_INT_USB_CH_TH_PROT_R    105
-#define AB8500_INT_MAIN_CH_TH_PROT_F   106
-#define AB8500_INT_MAIN_CH_TH_PROT_R	107
-#define AB8500_INT_USB_CHARGER_NOT_OKF	111
+#define AB8500_INT_MAIN_CH_TH_PROT_F	106 /* not 8505/9540 */
+#define AB8500_INT_MAIN_CH_TH_PROT_R	107 /* not 8505/9540 */
+#define AB8500_INT_CHCURLIMNOHSCHIRP	109
+#define AB8500_INT_CHCURLIMHSCHIRP	110
+#define AB8500_INT_XTAL32K_KO		111
+
+/* Definitions for AB9540 */
+/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */
+#define AB9540_INT_GPIO50R		113
+#define AB9540_INT_GPIO51R		114 /* not 8505 */
+#define AB9540_INT_GPIO52R		115
+#define AB9540_INT_GPIO53R		116
+#define AB9540_INT_GPIO54R		117 /* not 8505 */
+#define AB9540_INT_IEXT_CH_RF_BFN_R	118
+#define AB9540_INT_IEXT_CH_RF_BFN_F	119
+/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */
+#define AB9540_INT_GPIO50F		121
+#define AB9540_INT_GPIO51F		122 /* not 8505 */
+#define AB9540_INT_GPIO52F		123
+#define AB9540_INT_GPIO53F		124
+#define AB9540_INT_GPIO54F		125 /* not 8505 */
 
+/*
+ * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
+ * entire platform. This is a "compile time" constant so this must be set to
+ * the largest possible value that may be encountered with different AB SOCs.
+ * Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540
+ * which is larger.
+ */
 #define AB8500_NR_IRQS			112
+#define AB8505_NR_IRQS			128
+#define AB9540_NR_IRQS			128
+/* This is set to the roof of any AB8500 chip variant IRQ counts */
+#define AB8500_MAX_NR_IRQS		AB9540_NR_IRQS
+
 #define AB8500_NUM_IRQ_REGS		14
+#define AB9540_NUM_IRQ_REGS		17
 
 /**
  * struct ab8500 - ab8500 internal structure
@@ -147,13 +217,18 @@ struct device;
  * @lock: read/write operations lock
  * @irq_lock: genirq bus lock
  * @irq: irq line
+ * @version: chip version id (e.g. ab8500 or ab9540)
  * @chip_id: chip revision id
  * @write: register write
+ * @write_masked: masked register write
  * @read: register read
  * @rx_buf: rx buf for SPI
  * @tx_buf: tx buf for SPI
  * @mask: cache of IRQ regs for bus lock
  * @oldmask: cache of previous IRQ regs for bus lock
+ * @mask_size: Actual number of valid entries in mask[], oldmask[] and
+ * irq_reg_offset
+ * @irq_reg_offset: Array of offsets into IRQ registers
  */
 struct ab8500 {
 	struct device	*dev;
@@ -162,16 +237,20 @@ struct ab8500 {
 
 	int		irq_base;
 	int		irq;
+	enum ab8500_version version;
 	u8		chip_id;
 
-	int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
-	int (*read) (struct ab8500 *a8500, u16 addr);
+	int (*write)(struct ab8500 *ab8500, u16 addr, u8 data);
+	int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data);
+	int (*read)(struct ab8500 *ab8500, u16 addr);
 
 	unsigned long	tx_buf[4];
 	unsigned long	rx_buf[4];
 
-	u8 mask[AB8500_NUM_IRQ_REGS];
-	u8 oldmask[AB8500_NUM_IRQ_REGS];
+	u8 *mask;
+	u8 *oldmask;
+	int mask_size;
+	const int *irq_reg_offset;
 };
 
 struct regulator_reg_init;
@@ -197,7 +276,52 @@ struct ab8500_platform_data {
 	struct ab8500_gpio_platform_data *gpio;
 };
 
-extern int __devinit ab8500_init(struct ab8500 *ab8500);
+extern int __devinit ab8500_init(struct ab8500 *ab8500,
+				 enum ab8500_version version);
 extern int __devexit ab8500_exit(struct ab8500 *ab8500);
 
+static inline int is_ab8500(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB8500;
+}
+
+static inline int is_ab8505(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB8505;
+}
+
+static inline int is_ab9540(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB9540;
+}
+
+static inline int is_ab8540(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB8540;
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_1p0_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P0));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_2p0(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0));
+}
+
 #endif /* MFD_AB8500_H */
diff --git a/include/linux/mfd/anatop.h b/include/linux/mfd/anatop.h
new file mode 100644
index 000000000000..22c1007d3ec5
--- /dev/null
+++ b/include/linux/mfd/anatop.h
@@ -0,0 +1,40 @@
+/*
+ * anatop.h - Anatop MFD driver
+ *
+ *  Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+ *  Copyright (C) 2012 Linaro
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MFD_ANATOP_H
+#define __LINUX_MFD_ANATOP_H
+
+#include <linux/spinlock.h>
+
+/**
+ * anatop - MFD data
+ * @ioreg: ioremap register
+ * @reglock: spinlock for register read/write
+ */
+struct anatop {
+	void *ioreg;
+	spinlock_t reglock;
+};
+
+extern u32 anatop_get_bits(struct anatop *, u32, int, int);
+extern void anatop_set_bits(struct anatop *, u32, int, int, u32);
+
+#endif /*  __LINUX_MFD_ANATOP_H */
diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h
index 5702d1be13b4..7ffbd6e9e7fc 100644
--- a/include/linux/mfd/da9052/da9052.h
+++ b/include/linux/mfd/da9052/da9052.h
@@ -76,8 +76,6 @@ enum da9052_chip_id {
 struct da9052_pdata;
 
 struct da9052 {
-	struct mutex io_lock;
-
 	struct device *dev;
 	struct regmap *regmap;
 
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 60d27f7bfc1f..b3a43b1263fe 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -11,6 +11,24 @@
 #define __MFD_DB8500_PRCMU_H
 
 #include <linux/interrupt.h>
+#include <linux/bitops.h>
+
+/*
+ * Registers
+ */
+#define DB8500_PRCM_GPIOCR 0x138
+#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0	BIT(0)
+#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD	BIT(9)
+#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1	BIT(11)
+#define DB8500_PRCM_GPIOCR_SPI2_SELECT		BIT(23)
+
+#define DB8500_PRCM_LINE_VALUE 0x170
+#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0	BIT(3)
+
+#define DB8500_PRCM_DSI_SW_RESET 0x324
+#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0)
+#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1)
+#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2)
 
 /* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
 
@@ -421,40 +439,22 @@ enum auto_enable {
 /* End of file previously known as prcmu-fw-defs_v1.h */
 
 /**
- * enum hw_acc_dev - enum for hw accelerators
- * @HW_ACC_SVAMMDSP: for SVAMMDSP
- * @HW_ACC_SVAPIPE:  for SVAPIPE
- * @HW_ACC_SIAMMDSP: for SIAMMDSP
- * @HW_ACC_SIAPIPE: for SIAPIPE
- * @HW_ACC_SGA: for SGA
- * @HW_ACC_B2R2: for B2R2
- * @HW_ACC_MCDE: for MCDE
- * @HW_ACC_ESRAM1: for ESRAM1
- * @HW_ACC_ESRAM2: for ESRAM2
- * @HW_ACC_ESRAM3: for ESRAM3
- * @HW_ACC_ESRAM4: for ESRAM4
- * @NUM_HW_ACC: number of hardware accelerators
- *
- * Different hw accelerators which can be turned ON/
- * OFF or put into retention (MMDSPs and ESRAMs).
- * Used with EPOD API.
+ * enum prcmu_power_status - results from set_power_state
+ * @PRCMU_SLEEP_OK: Sleep went ok
+ * @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok
+ * @PRCMU_IDLE_OK: Idle went ok
+ * @PRCMU_DEEPIDLE_OK: DeepIdle went ok
+ * @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected
+ * @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected
  *
- * NOTE! Deprecated, to be removed when all users switched over to use the
- * regulator API.
  */
-enum hw_acc_dev {
-	HW_ACC_SVAMMDSP,
-	HW_ACC_SVAPIPE,
-	HW_ACC_SIAMMDSP,
-	HW_ACC_SIAPIPE,
-	HW_ACC_SGA,
-	HW_ACC_B2R2,
-	HW_ACC_MCDE,
-	HW_ACC_ESRAM1,
-	HW_ACC_ESRAM2,
-	HW_ACC_ESRAM3,
-	HW_ACC_ESRAM4,
-	NUM_HW_ACC
+enum prcmu_power_status {
+	PRCMU_SLEEP_OK			= 0xf3,
+	PRCMU_DEEP_SLEEP_OK		= 0xf6,
+	PRCMU_IDLE_OK			= 0xf0,
+	PRCMU_DEEPIDLE_OK		= 0xe3,
+	PRCMU_PRCMU2ARMPENDINGIT_ER	= 0x91,
+	PRCMU_ARMPENDINGIT_ER		= 0x93,
 };
 
 /*
@@ -493,6 +493,20 @@ struct prcmu_auto_pm_config {
 	u8 sva_policy;
 };
 
+#define PRCMU_FW_PROJECT_U8500		2
+#define PRCMU_FW_PROJECT_U9500		4
+#define PRCMU_FW_PROJECT_U8500_C2	7
+#define PRCMU_FW_PROJECT_U9500_C2	11
+#define PRCMU_FW_PROJECT_U8520		13
+#define PRCMU_FW_PROJECT_U8420		14
+
+struct prcmu_fw_version {
+	u8 project;
+	u8 api_version;
+	u8 func_version;
+	u8 errata;
+};
+
 #ifdef CONFIG_MFD_DB8500_PRCMU
 
 void db8500_prcmu_early_init(void);
@@ -500,42 +514,41 @@ int prcmu_set_rc_a2p(enum romcode_write);
 enum romcode_read prcmu_get_rc_p2a(void);
 enum ap_pwrst prcmu_get_xp70_current_state(void);
 bool prcmu_has_arm_maxopp(void);
-bool prcmu_is_u8400(void);
-int prcmu_set_ape_opp(u8 opp);
-int prcmu_get_ape_opp(void);
+struct prcmu_fw_version *prcmu_get_fw_version(void);
 int prcmu_request_ape_opp_100_voltage(bool enable);
 int prcmu_release_usb_wakeup_state(void);
-int prcmu_set_ddr_opp(u8 opp);
-int prcmu_get_ddr_opp(void);
-/* NOTE! Use regulator framework instead */
-int prcmu_set_hwacc(u16 hw_acc_dev, u8 state);
 void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
 	struct prcmu_auto_pm_config *idle);
 bool prcmu_is_auto_pm_enabled(void);
 
 int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
 int prcmu_set_clock_divider(u8 clock, u8 divider);
-int prcmu_config_hotdog(u8 threshold);
-int prcmu_config_hotmon(u8 low, u8 high);
-int prcmu_start_temp_sense(u16 cycles32k);
-int prcmu_stop_temp_sense(void);
+int db8500_prcmu_config_hotdog(u8 threshold);
+int db8500_prcmu_config_hotmon(u8 low, u8 high);
+int db8500_prcmu_start_temp_sense(u16 cycles32k);
+int db8500_prcmu_stop_temp_sense(void);
 int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
 int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
 
 void prcmu_ac_wake_req(void);
 void prcmu_ac_sleep_req(void);
-void prcmu_modem_reset(void);
-void prcmu_enable_spi2(void);
-void prcmu_disable_spi2(void);
+void db8500_prcmu_modem_reset(void);
 
-int prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
-int prcmu_enable_a9wdog(u8 id);
-int prcmu_disable_a9wdog(u8 id);
-int prcmu_kick_a9wdog(u8 id);
-int prcmu_load_a9wdog(u8 id, u32 val);
+int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
+int db8500_prcmu_enable_a9wdog(u8 id);
+int db8500_prcmu_disable_a9wdog(u8 id);
+int db8500_prcmu_kick_a9wdog(u8 id);
+int db8500_prcmu_load_a9wdog(u8 id, u32 val);
 
 void db8500_prcmu_system_reset(u16 reset_code);
 int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
+u8 db8500_prcmu_get_power_state_result(void);
+int db8500_prcmu_gic_decouple(void);
+int db8500_prcmu_gic_recouple(void);
+int db8500_prcmu_copy_gic_settings(void);
+bool db8500_prcmu_gic_pending_irq(void);
+bool db8500_prcmu_pending_irq(void);
+bool db8500_prcmu_is_cpu_in_wfi(int cpu);
 void db8500_prcmu_enable_wakeups(u32 wakeups);
 int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
 int db8500_prcmu_request_clock(u8 clock, bool enable);
@@ -549,6 +562,14 @@ u16 db8500_prcmu_get_reset_code(void);
 bool db8500_prcmu_is_ac_wake_requested(void);
 int db8500_prcmu_set_arm_opp(u8 opp);
 int db8500_prcmu_get_arm_opp(void);
+int db8500_prcmu_set_ape_opp(u8 opp);
+int db8500_prcmu_get_ape_opp(void);
+int db8500_prcmu_set_ddr_opp(u8 opp);
+int db8500_prcmu_get_ddr_opp(void);
+
+u32 db8500_prcmu_read(unsigned int reg);
+void db8500_prcmu_write(unsigned int reg, u32 value);
+void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value);
 
 #else /* !CONFIG_MFD_DB8500_PRCMU */
 
@@ -574,17 +595,17 @@ static inline bool prcmu_has_arm_maxopp(void)
 	return false;
 }
 
-static inline bool prcmu_is_u8400(void)
+static inline struct prcmu_fw_version *prcmu_get_fw_version(void)
 {
-	return false;
+	return NULL;
 }
 
-static inline int prcmu_set_ape_opp(u8 opp)
+static inline int db8500_prcmu_set_ape_opp(u8 opp)
 {
 	return 0;
 }
 
-static inline int prcmu_get_ape_opp(void)
+static inline int db8500_prcmu_get_ape_opp(void)
 {
 	return APE_100_OPP;
 }
@@ -599,21 +620,16 @@ static inline int prcmu_release_usb_wakeup_state(void)
 	return 0;
 }
 
-static inline int prcmu_set_ddr_opp(u8 opp)
+static inline int db8500_prcmu_set_ddr_opp(u8 opp)
 {
 	return 0;
 }
 
-static inline int prcmu_get_ddr_opp(void)
+static inline int db8500_prcmu_get_ddr_opp(void)
 {
 	return DDR_100_OPP;
 }
 
-static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state)
-{
-	return 0;
-}
-
 static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
 	struct prcmu_auto_pm_config *idle)
 {
@@ -634,22 +650,22 @@ static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
 	return 0;
 }
 
-static inline int prcmu_config_hotdog(u8 threshold)
+static inline int db8500_prcmu_config_hotdog(u8 threshold)
 {
 	return 0;
 }
 
-static inline int prcmu_config_hotmon(u8 low, u8 high)
+static inline int db8500_prcmu_config_hotmon(u8 low, u8 high)
 {
 	return 0;
 }
 
-static inline int prcmu_start_temp_sense(u16 cycles32k)
+static inline int db8500_prcmu_start_temp_sense(u16 cycles32k)
 {
 	return 0;
 }
 
-static inline int prcmu_stop_temp_sense(void)
+static inline int db8500_prcmu_stop_temp_sense(void)
 {
 	return 0;
 }
@@ -668,22 +684,17 @@ static inline void prcmu_ac_wake_req(void) {}
 
 static inline void prcmu_ac_sleep_req(void) {}
 
-static inline void prcmu_modem_reset(void) {}
+static inline void db8500_prcmu_modem_reset(void) {}
 
-static inline int prcmu_enable_spi2(void)
-{
-	return 0;
-}
+static inline void db8500_prcmu_system_reset(u16 reset_code) {}
 
-static inline int prcmu_disable_spi2(void)
+static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
 {
 	return 0;
 }
 
-static inline void db8500_prcmu_system_reset(u16 reset_code) {}
-
-static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-	bool keep_ap_pll)
+static inline u8 db8500_prcmu_get_power_state_result(void)
 {
 	return 0;
 }
@@ -729,27 +740,27 @@ static inline u16 db8500_prcmu_get_reset_code(void)
 	return 0;
 }
 
-static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
 {
 	return 0;
 }
 
-static inline int prcmu_enable_a9wdog(u8 id)
+static inline int db8500_prcmu_enable_a9wdog(u8 id)
 {
 	return 0;
 }
 
-static inline int prcmu_disable_a9wdog(u8 id)
+static inline int db8500_prcmu_disable_a9wdog(u8 id)
 {
 	return 0;
 }
 
-static inline int prcmu_kick_a9wdog(u8 id)
+static inline int db8500_prcmu_kick_a9wdog(u8 id)
 {
 	return 0;
 }
 
-static inline int prcmu_load_a9wdog(u8 id, u32 val)
+static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val)
 {
 	return 0;
 }
@@ -769,6 +780,16 @@ static inline int db8500_prcmu_get_arm_opp(void)
 	return 0;
 }
 
+static inline u32 db8500_prcmu_read(unsigned int reg)
+{
+	return 0;
+}
+
+static inline void db8500_prcmu_write(unsigned int reg, u32 value) {}
+
+static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask,
+	u32 value) {}
+
 #endif /* !CONFIG_MFD_DB8500_PRCMU */
 
 #endif /* __MFD_DB8500_PRCMU_H */
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index bac942f959c1..d7674eb7305f 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -10,7 +10,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
-#include <asm/mach-types.h>
+#include <linux/err.h>
 
 /* PRCMU Wakeup defines */
 enum prcmu_wakeup_index {
@@ -80,6 +80,29 @@ enum prcmu_wakeup_index {
 #define EPOD_STATE_ON_CLK_OFF	0x03
 #define EPOD_STATE_ON		0x04
 
+/* DB5500 CLKOUT IDs */
+enum {
+	DB5500_CLKOUT0 = 0,
+	DB5500_CLKOUT1,
+};
+
+/* DB5500 CLKOUTx sources */
+enum {
+	DB5500_CLKOUT_REF_CLK_SEL0,
+	DB5500_CLKOUT_RTC_CLK0_SEL0,
+	DB5500_CLKOUT_ULP_CLK_SEL0,
+	DB5500_CLKOUT_STATIC0,
+	DB5500_CLKOUT_REFCLK,
+	DB5500_CLKOUT_ULPCLK,
+	DB5500_CLKOUT_ARMCLK,
+	DB5500_CLKOUT_SYSACC0CLK,
+	DB5500_CLKOUT_SOC0PLLCLK,
+	DB5500_CLKOUT_SOC1PLLCLK,
+	DB5500_CLKOUT_DDRPLLCLK,
+	DB5500_CLKOUT_TVCLK,
+	DB5500_CLKOUT_IRDACLK,
+};
+
 /*
  * CLKOUT sources
  */
@@ -111,6 +134,7 @@ enum prcmu_clock {
 	PRCMU_MSP1CLK,
 	PRCMU_I2CCLK,
 	PRCMU_SDMMCCLK,
+	PRCMU_SPARE1CLK,
 	PRCMU_SLIMCLK,
 	PRCMU_PER1CLK,
 	PRCMU_PER2CLK,
@@ -139,12 +163,20 @@ enum prcmu_clock {
 	PRCMU_IRRCCLK,
 	PRCMU_SIACLK,
 	PRCMU_SVACLK,
+	PRCMU_ACLK,
 	PRCMU_NUM_REG_CLOCKS,
 	PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
+	PRCMU_CDCLK,
 	PRCMU_TIMCLK,
 	PRCMU_PLLSOC0,
 	PRCMU_PLLSOC1,
 	PRCMU_PLLDDR,
+	PRCMU_PLLDSI,
+	PRCMU_DSI0CLK,
+	PRCMU_DSI1CLK,
+	PRCMU_DSI0ESCCLK,
+	PRCMU_DSI1ESCCLK,
+	PRCMU_DSI2ESCCLK,
 };
 
 /**
@@ -153,12 +185,14 @@ enum prcmu_clock {
  * @APE_NO_CHANGE: The APE operating point is unchanged
  * @APE_100_OPP: The new APE operating point is ape100opp
  * @APE_50_OPP: 50%
+ * @APE_50_PARTLY_25_OPP: 50%, except some clocks at 25%.
  */
 enum ape_opp {
 	APE_OPP_INIT = 0x00,
 	APE_NO_CHANGE = 0x01,
 	APE_100_OPP = 0x02,
-	APE_50_OPP = 0x03
+	APE_50_OPP = 0x03,
+	APE_50_PARTLY_25_OPP = 0xFF,
 };
 
 /**
@@ -218,9 +252,11 @@ enum ddr_pwrst {
 
 #if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
 
+#include <mach/id.h>
+
 static inline void __init prcmu_early_init(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_early_init();
 	else
 		return db8500_prcmu_early_init();
@@ -229,7 +265,7 @@ static inline void __init prcmu_early_init(void)
 static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
 		bool keep_ap_pll)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_set_power_state(state, keep_ulp_clk,
 			keep_ap_pll);
 	else
@@ -237,9 +273,65 @@ static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
 			keep_ap_pll);
 }
 
+static inline u8 prcmu_get_power_state_result(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_get_power_state_result();
+}
+
+static inline int prcmu_gic_decouple(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_gic_decouple();
+}
+
+static inline int prcmu_gic_recouple(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_gic_recouple();
+}
+
+static inline bool prcmu_gic_pending_irq(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_gic_pending_irq();
+}
+
+static inline bool prcmu_is_cpu_in_wfi(int cpu)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_is_cpu_in_wfi(cpu);
+}
+
+static inline int prcmu_copy_gic_settings(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_copy_gic_settings();
+}
+
+static inline bool prcmu_pending_irq(void)
+{
+        if (cpu_is_u5500())
+                return -EINVAL;
+        else
+                return db8500_prcmu_pending_irq();
+}
+
 static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return -EINVAL;
 	else
 		return db8500_prcmu_set_epod(epod_id, epod_state);
@@ -247,7 +339,7 @@ static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
 
 static inline void prcmu_enable_wakeups(u32 wakeups)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		db5500_prcmu_enable_wakeups(wakeups);
 	else
 		db8500_prcmu_enable_wakeups(wakeups);
@@ -260,7 +352,7 @@ static inline void prcmu_disable_wakeups(void)
 
 static inline void prcmu_config_abb_event_readout(u32 abb_events)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		db5500_prcmu_config_abb_event_readout(abb_events);
 	else
 		db8500_prcmu_config_abb_event_readout(abb_events);
@@ -268,7 +360,7 @@ static inline void prcmu_config_abb_event_readout(u32 abb_events)
 
 static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		db5500_prcmu_get_abb_event_buffer(buf);
 	else
 		db8500_prcmu_get_abb_event_buffer(buf);
@@ -276,25 +368,40 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
 
 int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
 int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size);
 
 int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
 
 static inline int prcmu_request_clock(u8 clock, bool enable)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_request_clock(clock, enable);
 	else
 		return db8500_prcmu_request_clock(clock, enable);
 }
 
-int prcmu_set_ape_opp(u8 opp);
-int prcmu_get_ape_opp(void);
-int prcmu_set_ddr_opp(u8 opp);
-int prcmu_get_ddr_opp(void);
+unsigned long prcmu_clock_rate(u8 clock);
+long prcmu_round_clock_rate(u8 clock, unsigned long rate);
+int prcmu_set_clock_rate(u8 clock, unsigned long rate);
+
+static inline int prcmu_set_ddr_opp(u8 opp)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_set_ddr_opp(opp);
+}
+static inline int prcmu_get_ddr_opp(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_get_ddr_opp();
+}
 
 static inline int prcmu_set_arm_opp(u8 opp)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return -EINVAL;
 	else
 		return db8500_prcmu_set_arm_opp(opp);
@@ -302,15 +409,31 @@ static inline int prcmu_set_arm_opp(u8 opp)
 
 static inline int prcmu_get_arm_opp(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return -EINVAL;
 	else
 		return db8500_prcmu_get_arm_opp();
 }
 
+static inline int prcmu_set_ape_opp(u8 opp)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_set_ape_opp(opp);
+}
+
+static inline int prcmu_get_ape_opp(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_get_ape_opp();
+}
+
 static inline void prcmu_system_reset(u16 reset_code)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_system_reset(reset_code);
 	else
 		return db8500_prcmu_system_reset(reset_code);
@@ -318,7 +441,7 @@ static inline void prcmu_system_reset(u16 reset_code)
 
 static inline u16 prcmu_get_reset_code(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_get_reset_code();
 	else
 		return db8500_prcmu_get_reset_code();
@@ -326,10 +449,17 @@ static inline u16 prcmu_get_reset_code(void)
 
 void prcmu_ac_wake_req(void);
 void prcmu_ac_sleep_req(void);
-void prcmu_modem_reset(void);
+static inline void prcmu_modem_reset(void)
+{
+	if (cpu_is_u5500())
+		return;
+	else
+		return db8500_prcmu_modem_reset();
+}
+
 static inline bool prcmu_is_ac_wake_requested(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_is_ac_wake_requested();
 	else
 		return db8500_prcmu_is_ac_wake_requested();
@@ -337,7 +467,7 @@ static inline bool prcmu_is_ac_wake_requested(void)
 
 static inline int prcmu_set_display_clocks(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_set_display_clocks();
 	else
 		return db8500_prcmu_set_display_clocks();
@@ -345,7 +475,7 @@ static inline int prcmu_set_display_clocks(void)
 
 static inline int prcmu_disable_dsipll(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_disable_dsipll();
 	else
 		return db8500_prcmu_disable_dsipll();
@@ -353,7 +483,7 @@ static inline int prcmu_disable_dsipll(void)
 
 static inline int prcmu_enable_dsipll(void)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return db5500_prcmu_enable_dsipll();
 	else
 		return db8500_prcmu_enable_dsipll();
@@ -361,11 +491,107 @@ static inline int prcmu_enable_dsipll(void)
 
 static inline int prcmu_config_esram0_deep_sleep(u8 state)
 {
-	if (machine_is_u5500())
+	if (cpu_is_u5500())
 		return -EINVAL;
 	else
 		return db8500_prcmu_config_esram0_deep_sleep(state);
 }
+
+static inline int prcmu_config_hotdog(u8 threshold)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_config_hotdog(threshold);
+}
+
+static inline int prcmu_config_hotmon(u8 low, u8 high)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_config_hotmon(low, high);
+}
+
+static inline int prcmu_start_temp_sense(u16 cycles32k)
+{
+	if (cpu_is_u5500())
+		return  -EINVAL;
+	else
+		return  db8500_prcmu_start_temp_sense(cycles32k);
+}
+
+static inline int prcmu_stop_temp_sense(void)
+{
+	if (cpu_is_u5500())
+		return  -EINVAL;
+	else
+		return  db8500_prcmu_stop_temp_sense();
+}
+
+static inline u32 prcmu_read(unsigned int reg)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_read(reg);
+}
+
+static inline void prcmu_write(unsigned int reg, u32 value)
+{
+	if (cpu_is_u5500())
+		return;
+	else
+		db8500_prcmu_write(reg, value);
+}
+
+static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
+{
+	if (cpu_is_u5500())
+		return;
+	else
+		db8500_prcmu_write_masked(reg, mask, value);
+}
+
+static inline int prcmu_enable_a9wdog(u8 id)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_enable_a9wdog(id);
+}
+
+static inline int prcmu_disable_a9wdog(u8 id)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_disable_a9wdog(id);
+}
+
+static inline int prcmu_kick_a9wdog(u8 id)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_kick_a9wdog(id);
+}
+
+static inline int prcmu_load_a9wdog(u8 id, u32 timeout)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_load_a9wdog(id, timeout);
+}
+
+static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
+}
 #else
 
 static inline void __init prcmu_early_init(void) {}
@@ -395,6 +621,12 @@ static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
 	return -ENOSYS;
 }
 
+static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask,
+	u8 size)
+{
+	return -ENOSYS;
+}
+
 static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
 {
 	return 0;
@@ -405,6 +637,21 @@ static inline int prcmu_request_clock(u8 clock, bool enable)
 	return 0;
 }
 
+static inline long prcmu_round_clock_rate(u8 clock, unsigned long rate)
+{
+	return 0;
+}
+
+static inline int prcmu_set_clock_rate(u8 clock, unsigned long rate)
+{
+	return 0;
+}
+
+static inline unsigned long prcmu_clock_rate(u8 clock)
+{
+	return 0;
+}
+
 static inline int prcmu_set_ape_opp(u8 opp)
 {
 	return 0;
@@ -480,14 +727,133 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
 	*buf = NULL;
 }
 
+static inline int prcmu_config_hotdog(u8 threshold)
+{
+	return 0;
+}
+
+static inline int prcmu_config_hotmon(u8 low, u8 high)
+{
+	return 0;
+}
+
+static inline int prcmu_start_temp_sense(u16 cycles32k)
+{
+	return 0;
+}
+
+static inline int prcmu_stop_temp_sense(void)
+{
+	return 0;
+}
+
+static inline u32 prcmu_read(unsigned int reg)
+{
+	return 0;
+}
+
+static inline void prcmu_write(unsigned int reg, u32 value) {}
+
+static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
+
+#endif
+
+static inline void prcmu_set(unsigned int reg, u32 bits)
+{
+	prcmu_write_masked(reg, bits, bits);
+}
+
+static inline void prcmu_clear(unsigned int reg, u32 bits)
+{
+	prcmu_write_masked(reg, bits, 0);
+}
+
+#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+
+/**
+ * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
+ */
+static inline void prcmu_enable_spi2(void)
+{
+	if (cpu_is_u8500())
+		prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
+}
+
+/**
+ * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
+ */
+static inline void prcmu_disable_spi2(void)
+{
+	if (cpu_is_u8500())
+		prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
+}
+
+/**
+ * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD
+ * and UARTMOD on OtherAlternateC3.
+ */
+static inline void prcmu_enable_stm_mod_uart(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_set(DB8500_PRCM_GPIOCR,
+			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
+			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
+	}
+}
+
+/**
+ * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD
+ * and UARTMOD on OtherAlternateC3.
+ */
+static inline void prcmu_disable_stm_mod_uart(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_clear(DB8500_PRCM_GPIOCR,
+			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
+			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
+	}
+}
+
+/**
+ * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1.
+ */
+static inline void prcmu_enable_stm_ape(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_set(DB8500_PRCM_GPIOCR,
+			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
+	}
+}
+
+/**
+ * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1.
+ */
+static inline void prcmu_disable_stm_ape(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_clear(DB8500_PRCM_GPIOCR,
+			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
+	}
+}
+
+#else
+
+static inline void prcmu_enable_spi2(void) {}
+static inline void prcmu_disable_spi2(void) {}
+static inline void prcmu_enable_stm_mod_uart(void) {}
+static inline void prcmu_disable_stm_mod_uart(void) {}
+static inline void prcmu_enable_stm_ape(void) {}
+static inline void prcmu_disable_stm_ape(void) {}
+
 #endif
 
 /* PRCMU QoS APE OPP class */
 #define PRCMU_QOS_APE_OPP 1
 #define PRCMU_QOS_DDR_OPP 2
+#define PRCMU_QOS_ARM_OPP 3
 #define PRCMU_QOS_DEFAULT_VALUE -1
 
-#ifdef CONFIG_UX500_PRCMU_QOS_POWER
+#ifdef CONFIG_DBX500_PRCMU_QOS_POWER
 
 unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
 void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index b86ee45c8b03..10e038bac8dd 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -38,7 +38,8 @@ int mc13xxx_irq_ack(struct mc13xxx *mc13xxx, int irq);
 int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
 
 int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx,
-		unsigned int mode, unsigned int channel, unsigned int *sample);
+		unsigned int mode, unsigned int channel,
+		u8 ato, bool atox, unsigned int *sample);
 
 #define MC13XXX_IRQ_ADCDONE	0
 #define MC13XXX_IRQ_ADCBISDONE	1
@@ -157,6 +158,18 @@ struct mc13xxx_buttons_platform_data {
 	unsigned short b3on_key;
 };
 
+struct mc13xxx_ts_platform_data {
+	/* Delay between Touchscreen polarization and ADC Conversion.
+	 * Given in clock ticks of a 32 kHz clock which gives a granularity of
+	 * about 30.5ms */
+	u8 ato;
+
+#define MC13783_TS_ATO_FIRST false
+#define MC13783_TS_ATO_EACH  true
+	/* Use the ATO delay only for the first conversion or for each one */
+	bool atox;
+};
+
 struct mc13xxx_platform_data {
 #define MC13XXX_USE_TOUCHSCREEN (1 << 0)
 #define MC13XXX_USE_CODEC	(1 << 1)
@@ -167,6 +180,7 @@ struct mc13xxx_platform_data {
 	struct mc13xxx_regulator_platform_data regulators;
 	struct mc13xxx_leds_platform_data *leds;
 	struct mc13xxx_buttons_platform_data *buttons;
+	struct mc13xxx_ts_platform_data touch;
 };
 
 #define MC13XXX_ADC_MODE_TS		1
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h
new file mode 100644
index 000000000000..a2c61609d21d
--- /dev/null
+++ b/include/linux/mfd/rc5t583.h
@@ -0,0 +1,295 @@
+/*
+ * Core driver interface to access RICOH_RC5T583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ *      Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __LINUX_MFD_RC5T583_H
+#define __LINUX_MFD_RC5T583_H
+
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#define RC5T583_MAX_REGS		0xF8
+
+/* Maximum number of main interrupts */
+#define MAX_MAIN_INTERRUPT		5
+#define RC5T583_MAX_GPEDGE_REG		2
+#define RC5T583_MAX_INTERRUPT_MASK_REGS	9
+
+/* Interrupt enable register */
+#define RC5T583_INT_EN_SYS1	0x19
+#define RC5T583_INT_EN_SYS2	0x1D
+#define RC5T583_INT_EN_DCDC	0x41
+#define RC5T583_INT_EN_RTC	0xED
+#define RC5T583_INT_EN_ADC1	0x90
+#define RC5T583_INT_EN_ADC2	0x91
+#define RC5T583_INT_EN_ADC3	0x92
+
+/* Interrupt status registers (monitor regs in Ricoh)*/
+#define RC5T583_INTC_INTPOL	0xAD
+#define RC5T583_INTC_INTEN	0xAE
+#define RC5T583_INTC_INTMON	0xAF
+
+#define RC5T583_INT_MON_GRP	0xAF
+#define RC5T583_INT_MON_SYS1	0x1B
+#define RC5T583_INT_MON_SYS2	0x1F
+#define RC5T583_INT_MON_DCDC	0x43
+#define RC5T583_INT_MON_RTC	0xEE
+
+/* Interrupt clearing registers */
+#define RC5T583_INT_IR_SYS1	0x1A
+#define RC5T583_INT_IR_SYS2	0x1E
+#define RC5T583_INT_IR_DCDC	0x42
+#define RC5T583_INT_IR_RTC	0xEE
+#define RC5T583_INT_IR_ADCL	0x94
+#define RC5T583_INT_IR_ADCH	0x95
+#define RC5T583_INT_IR_ADCEND	0x96
+#define RC5T583_INT_IR_GPIOR	0xA9
+#define RC5T583_INT_IR_GPIOF	0xAA
+
+/* Sleep sequence registers */
+#define RC5T583_SLPSEQ1		0x21
+#define RC5T583_SLPSEQ2		0x22
+#define RC5T583_SLPSEQ3		0x23
+#define RC5T583_SLPSEQ4		0x24
+#define RC5T583_SLPSEQ5		0x25
+#define RC5T583_SLPSEQ6		0x26
+#define RC5T583_SLPSEQ7		0x27
+#define RC5T583_SLPSEQ8		0x28
+#define RC5T583_SLPSEQ9		0x29
+#define RC5T583_SLPSEQ10	0x2A
+#define RC5T583_SLPSEQ11	0x2B
+
+/* Regulator registers */
+#define RC5T583_REG_DC0CTL	0x30
+#define RC5T583_REG_DC0DAC	0x31
+#define RC5T583_REG_DC0LATCTL	0x32
+#define RC5T583_REG_SR0CTL	0x33
+
+#define RC5T583_REG_DC1CTL	0x34
+#define RC5T583_REG_DC1DAC	0x35
+#define RC5T583_REG_DC1LATCTL	0x36
+#define RC5T583_REG_SR1CTL	0x37
+
+#define RC5T583_REG_DC2CTL	0x38
+#define RC5T583_REG_DC2DAC	0x39
+#define RC5T583_REG_DC2LATCTL	0x3A
+#define RC5T583_REG_SR2CTL	0x3B
+
+#define RC5T583_REG_DC3CTL	0x3C
+#define RC5T583_REG_DC3DAC	0x3D
+#define RC5T583_REG_DC3LATCTL	0x3E
+#define RC5T583_REG_SR3CTL	0x3F
+
+
+#define RC5T583_REG_LDOEN1	0x50
+#define RC5T583_REG_LDOEN2	0x51
+#define RC5T583_REG_LDODIS1	0x52
+#define RC5T583_REG_LDODIS2	0x53
+
+#define RC5T583_REG_LDO0DAC	0x54
+#define RC5T583_REG_LDO1DAC	0x55
+#define RC5T583_REG_LDO2DAC	0x56
+#define RC5T583_REG_LDO3DAC	0x57
+#define RC5T583_REG_LDO4DAC	0x58
+#define RC5T583_REG_LDO5DAC	0x59
+#define RC5T583_REG_LDO6DAC	0x5A
+#define RC5T583_REG_LDO7DAC	0x5B
+#define RC5T583_REG_LDO8DAC	0x5C
+#define RC5T583_REG_LDO9DAC	0x5D
+
+#define RC5T583_REG_DC0DAC_DS	0x60
+#define RC5T583_REG_DC1DAC_DS	0x61
+#define RC5T583_REG_DC2DAC_DS	0x62
+#define RC5T583_REG_DC3DAC_DS	0x63
+
+#define RC5T583_REG_LDO0DAC_DS	0x64
+#define RC5T583_REG_LDO1DAC_DS	0x65
+#define RC5T583_REG_LDO2DAC_DS	0x66
+#define RC5T583_REG_LDO3DAC_DS	0x67
+#define RC5T583_REG_LDO4DAC_DS	0x68
+#define RC5T583_REG_LDO5DAC_DS	0x69
+#define RC5T583_REG_LDO6DAC_DS	0x6A
+#define RC5T583_REG_LDO7DAC_DS	0x6B
+#define RC5T583_REG_LDO8DAC_DS	0x6C
+#define RC5T583_REG_LDO9DAC_DS	0x6D
+
+/* GPIO register base address */
+#define RC5T583_GPIO_IOSEL	0xA0
+#define RC5T583_GPIO_PDEN	0xA1
+#define RC5T583_GPIO_IOOUT	0xA2
+#define RC5T583_GPIO_PGSEL	0xA3
+#define RC5T583_GPIO_GPINV	0xA4
+#define RC5T583_GPIO_GPDEB	0xA5
+#define RC5T583_GPIO_GPEDGE1	0xA6
+#define RC5T583_GPIO_GPEDGE2	0xA7
+#define RC5T583_GPIO_EN_INT	0xA8
+#define RC5T583_GPIO_MON_IOIN	0xAB
+#define RC5T583_GPIO_GPOFUNC	0xAC
+
+/* RICOH_RC5T583 IRQ definitions */
+enum {
+	RC5T583_IRQ_ONKEY,
+	RC5T583_IRQ_ACOK,
+	RC5T583_IRQ_LIDOPEN,
+	RC5T583_IRQ_PREOT,
+	RC5T583_IRQ_CLKSTP,
+	RC5T583_IRQ_ONKEY_OFF,
+	RC5T583_IRQ_WD,
+	RC5T583_IRQ_EN_PWRREQ1,
+	RC5T583_IRQ_EN_PWRREQ2,
+	RC5T583_IRQ_PRE_VINDET,
+
+	RC5T583_IRQ_DC0LIM,
+	RC5T583_IRQ_DC1LIM,
+	RC5T583_IRQ_DC2LIM,
+	RC5T583_IRQ_DC3LIM,
+
+	RC5T583_IRQ_CTC,
+	RC5T583_IRQ_YALE,
+	RC5T583_IRQ_DALE,
+	RC5T583_IRQ_WALE,
+
+	RC5T583_IRQ_AIN1L,
+	RC5T583_IRQ_AIN2L,
+	RC5T583_IRQ_AIN3L,
+	RC5T583_IRQ_VBATL,
+	RC5T583_IRQ_VIN3L,
+	RC5T583_IRQ_VIN8L,
+	RC5T583_IRQ_AIN1H,
+	RC5T583_IRQ_AIN2H,
+	RC5T583_IRQ_AIN3H,
+	RC5T583_IRQ_VBATH,
+	RC5T583_IRQ_VIN3H,
+	RC5T583_IRQ_VIN8H,
+	RC5T583_IRQ_ADCEND,
+
+	RC5T583_IRQ_GPIO0,
+	RC5T583_IRQ_GPIO1,
+	RC5T583_IRQ_GPIO2,
+	RC5T583_IRQ_GPIO3,
+	RC5T583_IRQ_GPIO4,
+	RC5T583_IRQ_GPIO5,
+	RC5T583_IRQ_GPIO6,
+	RC5T583_IRQ_GPIO7,
+
+	/* Should be last entry */
+	RC5T583_MAX_IRQS,
+};
+
+/* Ricoh583 gpio definitions */
+enum {
+	RC5T583_GPIO0,
+	RC5T583_GPIO1,
+	RC5T583_GPIO2,
+	RC5T583_GPIO3,
+	RC5T583_GPIO4,
+	RC5T583_GPIO5,
+	RC5T583_GPIO6,
+	RC5T583_GPIO7,
+
+	/* Should be last entry */
+	RC5T583_MAX_GPIO,
+};
+
+enum {
+	RC5T583_DS_NONE,
+	RC5T583_DS_DC0,
+	RC5T583_DS_DC1,
+	RC5T583_DS_DC2,
+	RC5T583_DS_DC3,
+	RC5T583_DS_LDO0,
+	RC5T583_DS_LDO1,
+	RC5T583_DS_LDO2,
+	RC5T583_DS_LDO3,
+	RC5T583_DS_LDO4,
+	RC5T583_DS_LDO5,
+	RC5T583_DS_LDO6,
+	RC5T583_DS_LDO7,
+	RC5T583_DS_LDO8,
+	RC5T583_DS_LDO9,
+	RC5T583_DS_PSO0,
+	RC5T583_DS_PSO1,
+	RC5T583_DS_PSO2,
+	RC5T583_DS_PSO3,
+	RC5T583_DS_PSO4,
+	RC5T583_DS_PSO5,
+	RC5T583_DS_PSO6,
+	RC5T583_DS_PSO7,
+
+	/* Should be last entry */
+	RC5T583_DS_MAX,
+};
+
+/*
+ * Ricoh pmic RC5T583 supports sleep through two external controls.
+ * The output of gpios and regulator can be enable/disable through
+ * this external signals.
+ */
+enum {
+	RC5T583_EXT_PWRREQ1_CONTROL = 0x1,
+	RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
+};
+
+struct rc5t583 {
+	struct device	*dev;
+	struct regmap	*regmap;
+	int		chip_irq;
+	int		irq_base;
+	struct mutex	irq_lock;
+	unsigned long	group_irq_en[MAX_MAIN_INTERRUPT];
+
+	/* For main interrupt bits in INTC */
+	uint8_t		intc_inten_reg;
+
+	/* For group interrupt bits and address */
+	uint8_t		irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS];
+
+	/* For gpio edge */
+	uint8_t		gpedge_reg[RC5T583_MAX_GPEDGE_REG];
+};
+
+/*
+ * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
+ * The board specific data is provided through this structure.
+ * @irq_base: Irq base number on which this device registers their interrupts.
+ * @enable_shutdown: Enable shutdown through the input pin "shutdown".
+ */
+
+struct rc5t583_platform_data {
+	int		irq_base;
+	bool		enable_shutdown;
+};
+
+int rc5t583_write(struct device *dev, u8 reg, uint8_t val);
+int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val);
+int rc5t583_set_bits(struct device *dev, unsigned int reg,
+		unsigned int bit_mask);
+int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+		unsigned int bit_mask);
+int rc5t583_update(struct device *dev, unsigned int reg,
+		unsigned int val, unsigned int mask);
+int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
+	int ext_pwr_req, int deepsleep_slot_nr);
+int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
+int rc5t583_irq_exit(struct rc5t583 *rc5t583);
+
+#endif
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 8c54de674b4b..8516fd1eaabc 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -28,6 +28,7 @@ enum stmpe_partnum {
 	STMPE1601,
 	STMPE2401,
 	STMPE2403,
+	STMPE_NBR_PARTS
 };
 
 /*
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
new file mode 100644
index 000000000000..38e31c55adbb
--- /dev/null
+++ b/include/linux/mfd/tps65090.h
@@ -0,0 +1,46 @@
+/*
+ * Core driver interface for TI TPS65090 PMIC family
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_TPS65090_H
+#define __LINUX_MFD_TPS65090_H
+
+struct tps65090_subdev_info {
+	int		id;
+	const char	*name;
+	void		*platform_data;
+};
+
+struct tps65090_platform_data {
+	int irq_base;
+	int num_subdevs;
+	struct tps65090_subdev_info *subdevs;
+};
+
+/*
+ * NOTE: the functions below are not intended for use outside
+ * of the TPS65090 sub-device drivers
+ */
+extern int tps65090_write(struct device *dev, int reg, uint8_t val);
+extern int tps65090_read(struct device *dev, int reg, uint8_t *val);
+extern int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num);
+extern int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num);
+
+#endif /*__LINUX_MFD_TPS65090_H */
diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h
new file mode 100644
index 000000000000..e030ef9a64ee
--- /dev/null
+++ b/include/linux/mfd/tps65217.h
@@ -0,0 +1,283 @@
+/*
+ * linux/mfd/tps65217.h
+ *
+ * Functions to access TPS65217 power management chip.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_TPS65217_H
+#define __LINUX_MFD_TPS65217_H
+
+#include <linux/i2c.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+/* I2C ID for TPS65217 part */
+#define TPS65217_I2C_ID			0x24
+
+/* All register addresses */
+#define TPS65217_REG_CHIPID		0X00
+#define TPS65217_REG_PPATH		0X01
+#define TPS65217_REG_INT		0X02
+#define TPS65217_REG_CHGCONFIG0		0X03
+#define TPS65217_REG_CHGCONFIG1		0X04
+#define TPS65217_REG_CHGCONFIG2		0X05
+#define TPS65217_REG_CHGCONFIG3		0X06
+#define TPS65217_REG_WLEDCTRL1		0X07
+#define TPS65217_REG_WLEDCTRL2		0X08
+#define TPS65217_REG_MUXCTRL		0X09
+#define TPS65217_REG_STATUS		0X0A
+#define TPS65217_REG_PASSWORD		0X0B
+#define TPS65217_REG_PGOOD		0X0C
+#define TPS65217_REG_DEFPG		0X0D
+#define TPS65217_REG_DEFDCDC1		0X0E
+#define TPS65217_REG_DEFDCDC2		0X0F
+#define TPS65217_REG_DEFDCDC3		0X10
+#define TPS65217_REG_DEFSLEW		0X11
+#define TPS65217_REG_DEFLDO1		0X12
+#define TPS65217_REG_DEFLDO2		0X13
+#define TPS65217_REG_DEFLS1		0X14
+#define TPS65217_REG_DEFLS2		0X15
+#define TPS65217_REG_ENABLE		0X16
+#define TPS65217_REG_DEFUVLO		0X18
+#define TPS65217_REG_SEQ1		0X19
+#define TPS65217_REG_SEQ2		0X1A
+#define TPS65217_REG_SEQ3		0X1B
+#define TPS65217_REG_SEQ4		0X1C
+#define TPS65217_REG_SEQ5		0X1D
+#define TPS65217_REG_SEQ6		0X1E
+
+/* Register field definitions */
+#define TPS65217_CHIPID_CHIP_MASK	0xF0
+#define TPS65217_CHIPID_REV_MASK	0x0F
+
+#define TPS65217_PPATH_ACSINK_ENABLE	BIT(7)
+#define TPS65217_PPATH_USBSINK_ENABLE	BIT(6)
+#define TPS65217_PPATH_AC_PW_ENABLE	BIT(5)
+#define TPS65217_PPATH_USB_PW_ENABLE	BIT(4)
+#define TPS65217_PPATH_AC_CURRENT_MASK	0x0C
+#define TPS65217_PPATH_USB_CURRENT_MASK	0x03
+
+#define TPS65217_INT_PBM		BIT(6)
+#define TPS65217_INT_ACM		BIT(5)
+#define TPS65217_INT_USBM		BIT(4)
+#define TPS65217_INT_PBI		BIT(2)
+#define TPS65217_INT_ACI		BIT(1)
+#define TPS65217_INT_USBI		BIT(0)
+
+#define TPS65217_CHGCONFIG0_TREG	BIT(7)
+#define TPS65217_CHGCONFIG0_DPPM	BIT(6)
+#define TPS65217_CHGCONFIG0_TSUSP	BIT(5)
+#define TPS65217_CHGCONFIG0_TERMI	BIT(4)
+#define TPS65217_CHGCONFIG0_ACTIVE	BIT(3)
+#define TPS65217_CHGCONFIG0_CHGTOUT	BIT(2)
+#define TPS65217_CHGCONFIG0_PCHGTOUT	BIT(1)
+#define TPS65217_CHGCONFIG0_BATTEMP	BIT(0)
+
+#define TPS65217_CHGCONFIG1_TMR_MASK	0xC0
+#define TPS65217_CHGCONFIG1_TMR_ENABLE	BIT(5)
+#define TPS65217_CHGCONFIG1_NTC_TYPE	BIT(4)
+#define TPS65217_CHGCONFIG1_RESET	BIT(3)
+#define TPS65217_CHGCONFIG1_TERM	BIT(2)
+#define TPS65217_CHGCONFIG1_SUSP	BIT(1)
+#define TPS65217_CHGCONFIG1_CHG_EN	BIT(0)
+
+#define TPS65217_CHGCONFIG2_DYNTMR	BIT(7)
+#define TPS65217_CHGCONFIG2_VPREGHG	BIT(6)
+#define TPS65217_CHGCONFIG2_VOREG_MASK	0x30
+
+#define TPS65217_CHGCONFIG3_ICHRG_MASK	0xC0
+#define TPS65217_CHGCONFIG3_DPPMTH_MASK	0x30
+#define TPS65217_CHGCONFIG2_PCHRGT	BIT(3)
+#define TPS65217_CHGCONFIG2_TERMIF	0x06
+#define TPS65217_CHGCONFIG2_TRANGE	BIT(0)
+
+#define TPS65217_WLEDCTRL1_ISINK_ENABLE	BIT(3)
+#define TPS65217_WLEDCTRL1_ISEL		BIT(2)
+#define TPS65217_WLEDCTRL1_FDIM_MASK	0x03
+
+#define TPS65217_WLEDCTRL2_DUTY_MASK	0x7F
+
+#define TPS65217_MUXCTRL_MUX_MASK	0x07
+
+#define TPS65217_STATUS_OFF		BIT(7)
+#define TPS65217_STATUS_ACPWR		BIT(3)
+#define TPS65217_STATUS_USBPWR		BIT(2)
+#define TPS65217_STATUS_PB		BIT(0)
+
+#define TPS65217_PASSWORD_REGS_UNLOCK	0x7D
+
+#define TPS65217_PGOOD_LDO3_PG		BIT(6)
+#define TPS65217_PGOOD_LDO4_PG		BIT(5)
+#define TPS65217_PGOOD_DC1_PG		BIT(4)
+#define TPS65217_PGOOD_DC2_PG		BIT(3)
+#define TPS65217_PGOOD_DC3_PG		BIT(2)
+#define TPS65217_PGOOD_LDO1_PG		BIT(1)
+#define TPS65217_PGOOD_LDO2_PG		BIT(0)
+
+#define TPS65217_DEFPG_LDO1PGM		BIT(3)
+#define TPS65217_DEFPG_LDO2PGM		BIT(2)
+#define TPS65217_DEFPG_PGDLY_MASK	0x03
+
+#define TPS65217_DEFDCDCX_XADJX		BIT(7)
+#define TPS65217_DEFDCDCX_DCDC_MASK	0x3F
+
+#define TPS65217_DEFSLEW_GO		BIT(7)
+#define TPS65217_DEFSLEW_GODSBL		BIT(6)
+#define TPS65217_DEFSLEW_PFM_EN1	BIT(5)
+#define TPS65217_DEFSLEW_PFM_EN2	BIT(4)
+#define TPS65217_DEFSLEW_PFM_EN3	BIT(3)
+#define TPS65217_DEFSLEW_SLEW_MASK	0x07
+
+#define TPS65217_DEFLDO1_LDO1_MASK	0x0F
+
+#define TPS65217_DEFLDO2_TRACK		BIT(6)
+#define TPS65217_DEFLDO2_LDO2_MASK	0x3F
+
+#define TPS65217_DEFLDO3_LDO3_EN	BIT(5)
+#define TPS65217_DEFLDO3_LDO3_MASK	0x1F
+
+#define TPS65217_DEFLDO4_LDO4_EN	BIT(5)
+#define TPS65217_DEFLDO4_LDO4_MASK	0x1F
+
+#define TPS65217_ENABLE_LS1_EN		BIT(6)
+#define TPS65217_ENABLE_LS2_EN		BIT(5)
+#define TPS65217_ENABLE_DC1_EN		BIT(4)
+#define TPS65217_ENABLE_DC2_EN		BIT(3)
+#define TPS65217_ENABLE_DC3_EN		BIT(2)
+#define TPS65217_ENABLE_LDO1_EN		BIT(1)
+#define TPS65217_ENABLE_LDO2_EN		BIT(0)
+
+#define TPS65217_DEFUVLO_UVLOHYS	BIT(2)
+#define TPS65217_DEFUVLO_UVLO_MASK	0x03
+
+#define TPS65217_SEQ1_DC1_SEQ_MASK	0xF0
+#define TPS65217_SEQ1_DC2_SEQ_MASK	0x0F
+
+#define TPS65217_SEQ2_DC3_SEQ_MASK	0xF0
+#define TPS65217_SEQ2_LDO1_SEQ_MASK	0x0F
+
+#define TPS65217_SEQ3_LDO2_SEQ_MASK	0xF0
+#define TPS65217_SEQ3_LDO3_SEQ_MASK	0x0F
+
+#define TPS65217_SEQ4_LDO4_SEQ_MASK	0xF0
+
+#define TPS65217_SEQ5_DLY1_MASK		0xC0
+#define TPS65217_SEQ5_DLY2_MASK		0x30
+#define TPS65217_SEQ5_DLY3_MASK		0x0C
+#define TPS65217_SEQ5_DLY4_MASK		0x03
+
+#define TPS65217_SEQ6_DLY5_MASK		0xC0
+#define TPS65217_SEQ6_DLY6_MASK		0x30
+#define TPS65217_SEQ6_SEQUP		BIT(2)
+#define TPS65217_SEQ6_SEQDWN		BIT(1)
+#define TPS65217_SEQ6_INSTDWN		BIT(0)
+
+#define TPS65217_MAX_REGISTER		0x1E
+#define TPS65217_PROTECT_NONE		0
+#define TPS65217_PROTECT_L1		1
+#define TPS65217_PROTECT_L2		2
+
+
+enum tps65217_regulator_id {
+	/* DCDC's */
+	TPS65217_DCDC_1,
+	TPS65217_DCDC_2,
+	TPS65217_DCDC_3,
+	/* LDOs */
+	TPS65217_LDO_1,
+	TPS65217_LDO_2,
+	TPS65217_LDO_3,
+	TPS65217_LDO_4,
+};
+
+#define TPS65217_MAX_REG_ID		TPS65217_LDO_4
+
+/* Number of step-down converters available */
+#define TPS65217_NUM_DCDC		3
+/* Number of LDO voltage regulators available */
+#define TPS65217_NUM_LDO		4
+/* Number of total regulators available */
+#define TPS65217_NUM_REGULATOR		(TPS65217_NUM_DCDC + TPS65217_NUM_LDO)
+
+/**
+ * struct tps65217_board - packages regulator init data
+ * @tps65217_regulator_data: regulator initialization values
+ *
+ * Board data may be used to initialize regulator.
+ */
+struct tps65217_board {
+	struct regulator_init_data *tps65217_init_data;
+};
+
+/**
+ * struct tps_info - packages regulator constraints
+ * @name:		Voltage regulator name
+ * @min_uV:		minimum micro volts
+ * @max_uV:		minimum micro volts
+ * @vsel_to_uv:		Function pointer to get voltage from selector
+ * @uv_to_vsel:		Function pointer to get selector from voltage
+ * @table:		Table for non-uniform voltage step-size
+ * @table_len:		Length of the voltage table
+ * @enable_mask:	Regulator enable mask bits
+ * @set_vout_reg:	Regulator output voltage set register
+ * @set_vout_mask:	Regulator output voltage set mask
+ *
+ * This data is used to check the regualtor voltage limits while setting.
+ */
+struct tps_info {
+	const char *name;
+	int min_uV;
+	int max_uV;
+	int (*vsel_to_uv)(unsigned int vsel);
+	int (*uv_to_vsel)(int uV, unsigned int *vsel);
+	const int *table;
+	unsigned int table_len;
+	unsigned int enable_mask;
+	unsigned int set_vout_reg;
+	unsigned int set_vout_mask;
+};
+
+/**
+ * struct tps65217 - tps65217 sub-driver chip access routines
+ *
+ * Device data may be used to access the TPS65217 chip
+ */
+
+struct tps65217 {
+	struct device *dev;
+	struct tps65217_board *pdata;
+	struct regulator_desc desc[TPS65217_NUM_REGULATOR];
+	struct regulator_dev *rdev[TPS65217_NUM_REGULATOR];
+	struct tps_info *info[TPS65217_NUM_REGULATOR];
+	struct regmap *regmap;
+
+	/* Client devices */
+	struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR];
+};
+
+static inline struct tps65217 *dev_to_tps65217(struct device *dev)
+{
+	return dev_get_drvdata(dev);
+}
+
+int tps65217_reg_read(struct tps65217 *tps, unsigned int reg,
+					unsigned int *val);
+int tps65217_reg_write(struct tps65217 *tps, unsigned int reg,
+			unsigned int val, unsigned int level);
+int tps65217_set_bits(struct tps65217 *tps, unsigned int reg,
+		unsigned int mask, unsigned int val, unsigned int level);
+int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg,
+		unsigned int mask, unsigned int level);
+
+#endif /*  __LINUX_MFD_TPS65217_H */
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 76700b5eee92..e34886397f90 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -17,6 +17,8 @@
 #ifndef __LINUX_MFD_TPS65910_H
 #define __LINUX_MFD_TPS65910_H
 
+#include <linux/gpio.h>
+
 /* TPS chip id list */
 #define TPS65910			0
 #define TPS65911			1
@@ -796,6 +798,7 @@ struct tps65910_board {
 struct tps65910 {
 	struct device *dev;
 	struct i2c_client *i2c_client;
+	struct regmap *regmap;
 	struct mutex io_mutex;
 	unsigned int id;
 	int (*read)(struct tps65910 *tps65910, u8 reg, int size, void *dest);
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index dc3e05011689..893267bb6229 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -22,7 +22,6 @@ struct wm8994_ldo_pdata {
 	/** GPIOs to enable regulator, 0 or less if not available */
 	int enable;
 
-	const char *supply;
 	const struct regulator_init_data *init_data;
 };