aboutsummaryrefslogtreecommitdiff
path: root/include/linux/mfd
diff options
context:
space:
mode:
authorKuppuswamy Sathyanarayanan2017-06-05 12:08:05 -0700
committerLee Jones2017-06-19 15:45:01 +0100
commit57129044f5044dcd73c22d91491906104bd331fd (patch)
treee421e86c4bf15475ac6cbd0ea04179b9563ebe4f /include/linux/mfd
parent5131f072e5bff3a6a1da6b8f4882b6747e8c2a49 (diff)
mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips
Whishkey cove PMIC has support to mask/unmask interrupts at two levels. At first level we can mask/unmask interrupt domains like TMU, GPIO, ADC, CHGR, BCU THERMAL and PWRBTN and at second level, it provides facility to mask/unmask individual interrupts belong each of this domain. For example, in case of TMU, at first level we have TMU interrupt domain, and at second level we have two interrupts, wake alarm, system alarm that belong to the TMU interrupt domain. Currently, in this driver all first level IRQs are registered as part of IRQ chip(bxtwc_regmap_irq_chip). By default, after you register the IRQ chip from your driver, all IRQs in that chip will masked and can only be enabled if that IRQ is requested using request_irq() call. This is the default Linux IRQ behavior model. And whenever a dependent device that belongs to PMIC requests only the second level IRQ and not explicitly unmask the first level IRQ, then in essence the second level IRQ will still be disabled. For example, if TMU device driver request wake_alarm IRQ and not explicitly unmask TMU level 1 IRQ then according to the default Linux IRQ model, wake_alarm IRQ will still be disabled. So the proper solution to fix this issue is to use the chained IRQ chip concept. We should chain all the second level chip IRQs to the corresponding first level IRQ. To do this, we need to create separate IRQ chips for every group of second level IRQs. In case of TMU, when adding second level IRQ chip, instead of using PMIC IRQ we should use the corresponding first level IRQ. So the following code will change from ret = regmap_add_irq_chip(pmic->regmap, pmic->irq, ...) to, virq = regmap_irq_get_virq(&pmic->irq_chip_data, BXTWC_TMU_LVL1_IRQ); ret = regmap_add_irq_chip(pmic->regmap, virq, ...) In case of Whiskey Cove Type-C driver, Since USBC IRQ is moved under charger level2 IRQ chip. We should use charger IRQ chip(irq_chip_data_chgr) to get the USBC virtual IRQ number. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Revieved-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'include/linux/mfd')
-rw-r--r--include/linux/mfd/intel_soc_pmic.h5
1 files changed, 4 insertions, 1 deletions
diff --git a/include/linux/mfd/intel_soc_pmic.h b/include/linux/mfd/intel_soc_pmic.h
index 956caa0628f5..5aacdb017a9f 100644
--- a/include/linux/mfd/intel_soc_pmic.h
+++ b/include/linux/mfd/intel_soc_pmic.h
@@ -25,8 +25,11 @@ struct intel_soc_pmic {
int irq;
struct regmap *regmap;
struct regmap_irq_chip_data *irq_chip_data;
- struct regmap_irq_chip_data *irq_chip_data_level2;
struct regmap_irq_chip_data *irq_chip_data_tmu;
+ struct regmap_irq_chip_data *irq_chip_data_bcu;
+ struct regmap_irq_chip_data *irq_chip_data_adc;
+ struct regmap_irq_chip_data *irq_chip_data_chgr;
+ struct regmap_irq_chip_data *irq_chip_data_crit;
struct device *dev;
};