Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.13 series:

  Core:
   - The documentation is moved over to RST.
   - We now have agreed bindings for enabling input and output buffers
     without actually enabling input and/or output on a pin. We are
     chiseling out some details of pin control electronics.

  New drivers:
   - ZTE ZX
   - Renesas RZA1
   - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
     to use this pin controller and consolidate earlier spread out code.
   - Microschip MCP23S08: this driver is migrated from the GPIO
     subsystem and totally rewritten to use proper pin control. All
     users are switched over.

  New subdrivers:
   - Renesas R8A7743 and R8A7745.
   - Allwinner Sunxi A83T R_PIO.
   - Marvell MVEBU Armada CP110 and AP806.
   - Intel Cannon Lake PCH.
   - Qualcomm IPQ8074.

  Notable improvements:
   - IRQ support on the Marvell MVEBU Armada 37xx.
   - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
   - Rockchip driver now supports iomux-route switching for RK3228,
     RK3328 and RK3399.
   - Rockchip A10 and A20 are merged into a single driver.
   - STM32 has improved GPIO support.
   - Samsung Exynos drivers are split per ARMv7 and ARMv8.
   - Marvell MVEBU is converted to use regmap for register access.

  Maintenance:
   - Several Renesas SH-PFC refactorings and updates.
   - Serious code size cut for Mediatek MT7623.
   - Misc janitorial and MAINTAINERS fixes"

* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
  pinctrl: samsung: Remove bogus irq_[un]mask from resource management
  pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
  pinctrl: rza1: Remove unneeded wrong check for wrong variable
  pinctrl: qcom: Add ipq8074 pinctrl driver
  pinctrl: freescale: imx7d: make of_device_ids const.
  pinctrl: DT: extend the pinmux property to support integers array
  pinctrl: generic: Add output-enable property
  pinctrl: armada-37xx: Fix number of pin in sdio_sb
  pinctrl: armada-37xx: Fix uart2 group selection register mask
  pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
  pinctrl: sh-pfc: r8a7795: Add PWM support
  MAINTAINERS: Add Qualcomm pinctrl drivers section
  arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
  dt-bindings: pinctrl: Add RZ/A1 bindings doc
  pinctrl: Renesas RZ/A1 pin and gpio controller
  pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
  pinctrl.txt: move it to the driver-api book
  pinctrl: ingenic: checking for NULL instead of IS_ERR()
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
  ...

1 files changed, 6 insertions, 32 deletions

diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h
index aa07d7b32568..82d96a346e6f 100644
--- a/include/linux/spi/mcp23s08.h
+++ b/include/linux/spi/mcp23s08.h
@@ -1,11 +1,3 @@
-
-/* FIXME driver should be able to handle IRQs...  */
-
-struct mcp23s08_chip_info {
-	bool		is_present;	/* true if populated */
-	unsigned	pullups;	/* BIT(x) means enable pullup x */
-};
-
 struct mcp23s08_platform_data {
 	/* For mcp23s08, up to 4 slaves (numbered 0..3) can share one SPI
 	 * chipselect, each providing 1 gpio_chip instance with 8 gpios.
@@ -13,31 +5,13 @@ struct mcp23s08_platform_data {
 	 * chipselect, each providing 1 gpio_chip (port A + port B) with
 	 * 16 gpios.
 	 */
-	struct mcp23s08_chip_info	chip[8];
+	u32 spi_present_mask;
 
-	/* "base" is the number of the first GPIO.  Dynamic assignment is
-	 * not currently supported, and even if there are gaps in chip
-	 * addressing the GPIO numbers are sequential .. so for example
-	 * if only slaves 0 and 3 are present, their GPIOs range from
-	 * base to base+15 (or base+31 for s17 variant).
+	/* "base" is the number of the first GPIO or -1 for dynamic
+	 * assignment. If there are gaps in chip addressing the GPIO
+	 * numbers are sequential .. so for example if only slaves 0
+	 * and 3 are present, their GPIOs range from base to base+15
+	 * (or base+31 for s17 variant).
 	 */
 	unsigned	base;
-	/* Marks the device as a interrupt controller.
-	 * NOTE: The interrupt functionality is only supported for i2c
-	 * versions of the chips. The spi chips can also do the interrupts,
-	 * but this is not supported by the linux driver yet.
-	 */
-	bool		irq_controller;
-
-	/* Sets the mirror flag in the IOCON register. Devices
-	 * with two interrupt outputs (these are the devices ending with 17 and
-	 * those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
-	 * IO 8-15 are bank 2. These chips have two different interrupt outputs:
-	 * One for bank 1 and another for bank 2. If irq-mirror is set, both
-	 * interrupts are generated regardless of the bank that an input change
-	 * occurred on. If it is not set, the interrupt are only generated for
-	 * the bank they belong to.
-	 * On devices with only one interrupt output this property is useless.
-	 */
-	bool		mirror;
 };