Merge tag 'usb-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.8 merge window

Here's the big pull request for Peripheral stack and
all related drivers.

This time around with 109 non-merge commits mostly
concentrated on drivers/usb/gadget/udc (41.5%) and
drivers/usb/dwc3 (28.1%).

There's a big rework on dwc3's transfer handling
which gave us almost 3x faster USB3 speeds with Mass
Storage on a particular test scenario I measured. We
are also removing platform_data from dwc3 after
converting all users to built-in properties instead.

For the Gadget API, we're just adding tracepoints to
aid debugging activities.

Other than these, there's the usual set of spelling
fixes, minor bug fixes and sparse warnings cleanups.

3 files changed, 66 insertions, 727 deletions

diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index fefe8b06a63d..612dbdfa388e 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -25,6 +25,8 @@
 #include <linux/workqueue.h>
 #include <linux/usb/ch9.h>
 
+#define UDC_TRACE_STR_MAX	512
+
 struct usb_ep;
 
 /**
@@ -228,307 +230,49 @@ struct usb_ep {
 
 /*-------------------------------------------------------------------------*/
 
-/**
- * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint
- * @ep:the endpoint being configured
- * @maxpacket_limit:value of maximum packet size limit
- *
- * This function should be used only in UDC drivers to initialize endpoint
- * (usually in probe function).
- */
+#if IS_ENABLED(CONFIG_USB_GADGET)
+void usb_ep_set_maxpacket_limit(struct usb_ep *ep, unsigned maxpacket_limit);
+int usb_ep_enable(struct usb_ep *ep);
+int usb_ep_disable(struct usb_ep *ep);
+struct usb_request *usb_ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+void usb_ep_free_request(struct usb_ep *ep, struct usb_request *req);
+int usb_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags);
+int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req);
+int usb_ep_set_halt(struct usb_ep *ep);
+int usb_ep_clear_halt(struct usb_ep *ep);
+int usb_ep_set_wedge(struct usb_ep *ep);
+int usb_ep_fifo_status(struct usb_ep *ep);
+void usb_ep_fifo_flush(struct usb_ep *ep);
+#else
 static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
-					      unsigned maxpacket_limit)
-{
-	ep->maxpacket_limit = maxpacket_limit;
-	ep->maxpacket = maxpacket_limit;
-}
-
-/**
- * usb_ep_enable - configure endpoint, making it usable
- * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
- *	drivers discover endpoints through the ep_list of a usb_gadget.
- *
- * When configurations are set, or when interface settings change, the driver
- * will enable or disable the relevant endpoints.  while it is enabled, an
- * endpoint may be used for i/o until the driver receives a disconnect() from
- * the host or until the endpoint is disabled.
- *
- * the ep0 implementation (which calls this routine) must ensure that the
- * hardware capabilities of each endpoint match the descriptor provided
- * for it.  for example, an endpoint named "ep2in-bulk" would be usable
- * for interrupt transfers as well as bulk, but it likely couldn't be used
- * for iso transfers or for endpoint 14.  some endpoints are fully
- * configurable, with more generic names like "ep-a".  (remember that for
- * USB, "in" means "towards the USB master".)
- *
- * returns zero, or a negative error code.
- */
+		unsigned maxpacket_limit)
+{ }
 static inline int usb_ep_enable(struct usb_ep *ep)
-{
-	int ret;
-
-	if (ep->enabled)
-		return 0;
-
-	ret = ep->ops->enable(ep, ep->desc);
-	if (ret)
-		return ret;
-
-	ep->enabled = true;
-
-	return 0;
-}
-
-/**
- * usb_ep_disable - endpoint is no longer usable
- * @ep:the endpoint being unconfigured.  may not be the endpoint named "ep0".
- *
- * no other task may be using this endpoint when this is called.
- * any pending and uncompleted requests will complete with status
- * indicating disconnect (-ESHUTDOWN) before this call returns.
- * gadget drivers must call usb_ep_enable() again before queueing
- * requests to the endpoint.
- *
- * returns zero, or a negative error code.
- */
+{ return 0; }
 static inline int usb_ep_disable(struct usb_ep *ep)
-{
-	int ret;
-
-	if (!ep->enabled)
-		return 0;
-
-	ret = ep->ops->disable(ep);
-	if (ret)
-		return ret;
-
-	ep->enabled = false;
-
-	return 0;
-}
-
-/**
- * usb_ep_alloc_request - allocate a request object to use with this endpoint
- * @ep:the endpoint to be used with with the request
- * @gfp_flags:GFP_* flags to use
- *
- * Request objects must be allocated with this call, since they normally
- * need controller-specific setup and may even need endpoint-specific
- * resources such as allocation of DMA descriptors.
- * Requests may be submitted with usb_ep_queue(), and receive a single
- * completion callback.  Free requests with usb_ep_free_request(), when
- * they are no longer needed.
- *
- * Returns the request, or null if one could not be allocated.
- */
+{ return 0; }
 static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
-						       gfp_t gfp_flags)
-{
-	return ep->ops->alloc_request(ep, gfp_flags);
-}
-
-/**
- * usb_ep_free_request - frees a request object
- * @ep:the endpoint associated with the request
- * @req:the request being freed
- *
- * Reverses the effect of usb_ep_alloc_request().
- * Caller guarantees the request is not queued, and that it will
- * no longer be requeued (or otherwise used).
- */
+		gfp_t gfp_flags)
+{ return NULL; }
 static inline void usb_ep_free_request(struct usb_ep *ep,
-				       struct usb_request *req)
-{
-	ep->ops->free_request(ep, req);
-}
-
-/**
- * usb_ep_queue - queues (submits) an I/O request to an endpoint.
- * @ep:the endpoint associated with the request
- * @req:the request being submitted
- * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
- *	pre-allocate all necessary memory with the request.
- *
- * This tells the device controller to perform the specified request through
- * that endpoint (reading or writing a buffer).  When the request completes,
- * including being canceled by usb_ep_dequeue(), the request's completion
- * routine is called to return the request to the driver.  Any endpoint
- * (except control endpoints like ep0) may have more than one transfer
- * request queued; they complete in FIFO order.  Once a gadget driver
- * submits a request, that request may not be examined or modified until it
- * is given back to that driver through the completion callback.
- *
- * Each request is turned into one or more packets.  The controller driver
- * never merges adjacent requests into the same packet.  OUT transfers
- * will sometimes use data that's already buffered in the hardware.
- * Drivers can rely on the fact that the first byte of the request's buffer
- * always corresponds to the first byte of some USB packet, for both
- * IN and OUT transfers.
- *
- * Bulk endpoints can queue any amount of data; the transfer is packetized
- * automatically.  The last packet will be short if the request doesn't fill it
- * out completely.  Zero length packets (ZLPs) should be avoided in portable
- * protocols since not all usb hardware can successfully handle zero length
- * packets.  (ZLPs may be explicitly written, and may be implicitly written if
- * the request 'zero' flag is set.)  Bulk endpoints may also be used
- * for interrupt transfers; but the reverse is not true, and some endpoints
- * won't support every interrupt transfer.  (Such as 768 byte packets.)
- *
- * Interrupt-only endpoints are less functional than bulk endpoints, for
- * example by not supporting queueing or not handling buffers that are
- * larger than the endpoint's maxpacket size.  They may also treat data
- * toggle differently.
- *
- * Control endpoints ... after getting a setup() callback, the driver queues
- * one response (even if it would be zero length).  That enables the
- * status ack, after transferring data as specified in the response.  Setup
- * functions may return negative error codes to generate protocol stalls.
- * (Note that some USB device controllers disallow protocol stall responses
- * in some cases.)  When control responses are deferred (the response is
- * written after the setup callback returns), then usb_ep_set_halt() may be
- * used on ep0 to trigger protocol stalls.  Depending on the controller,
- * it may not be possible to trigger a status-stage protocol stall when the
- * data stage is over, that is, from within the response's completion
- * routine.
- *
- * For periodic endpoints, like interrupt or isochronous ones, the usb host
- * arranges to poll once per interval, and the gadget driver usually will
- * have queued some data to transfer at that time.
- *
- * Returns zero, or a negative error code.  Endpoints that are not enabled
- * report errors; errors will also be
- * reported when the usb peripheral is disconnected.
- */
-static inline int usb_ep_queue(struct usb_ep *ep,
-			       struct usb_request *req, gfp_t gfp_flags)
-{
-	if (WARN_ON_ONCE(!ep->enabled && ep->address))
-		return -ESHUTDOWN;
-
-	return ep->ops->queue(ep, req, gfp_flags);
-}
-
-/**
- * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
- * @ep:the endpoint associated with the request
- * @req:the request being canceled
- *
- * If the request is still active on the endpoint, it is dequeued and its
- * completion routine is called (with status -ECONNRESET); else a negative
- * error code is returned. This is guaranteed to happen before the call to
- * usb_ep_dequeue() returns.
- *
- * Note that some hardware can't clear out write fifos (to unlink the request
- * at the head of the queue) except as part of disconnecting from usb. Such
- * restrictions prevent drivers from supporting configuration changes,
- * even to configuration zero (a "chapter 9" requirement).
- */
+		struct usb_request *req)
+{ }
+static inline int usb_ep_queue(struct usb_ep *ep, struct usb_request *req,
+		gfp_t gfp_flags)
+{ return 0; }
 static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
-{
-	return ep->ops->dequeue(ep, req);
-}
-
-/**
- * usb_ep_set_halt - sets the endpoint halt feature.
- * @ep: the non-isochronous endpoint being stalled
- *
- * Use this to stall an endpoint, perhaps as an error report.
- * Except for control endpoints,
- * the endpoint stays halted (will not stream any data) until the host
- * clears this feature; drivers may need to empty the endpoint's request
- * queue first, to make sure no inappropriate transfers happen.
- *
- * Note that while an endpoint CLEAR_FEATURE will be invisible to the
- * gadget driver, a SET_INTERFACE will not be.  To reset endpoints for the
- * current altsetting, see usb_ep_clear_halt().  When switching altsettings,
- * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
- *
- * Returns zero, or a negative error code.  On success, this call sets
- * underlying hardware state that blocks data transfers.
- * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
- * transfer requests are still queued, or if the controller hardware
- * (usually a FIFO) still holds bytes that the host hasn't collected.
- */
+{ return 0; }
 static inline int usb_ep_set_halt(struct usb_ep *ep)
-{
-	return ep->ops->set_halt(ep, 1);
-}
-
-/**
- * usb_ep_clear_halt - clears endpoint halt, and resets toggle
- * @ep:the bulk or interrupt endpoint being reset
- *
- * Use this when responding to the standard usb "set interface" request,
- * for endpoints that aren't reconfigured, after clearing any other state
- * in the endpoint's i/o queue.
- *
- * Returns zero, or a negative error code.  On success, this call clears
- * the underlying hardware state reflecting endpoint halt and data toggle.
- * Note that some hardware can't support this request (like pxa2xx_udc),
- * and accordingly can't correctly implement interface altsettings.
- */
+{ return 0; }
 static inline int usb_ep_clear_halt(struct usb_ep *ep)
-{
-	return ep->ops->set_halt(ep, 0);
-}
-
-/**
- * usb_ep_set_wedge - sets the halt feature and ignores clear requests
- * @ep: the endpoint being wedged
- *
- * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
- * requests. If the gadget driver clears the halt status, it will
- * automatically unwedge the endpoint.
- *
- * Returns zero on success, else negative errno.
- */
-static inline int
-usb_ep_set_wedge(struct usb_ep *ep)
-{
-	if (ep->ops->set_wedge)
-		return ep->ops->set_wedge(ep);
-	else
-		return ep->ops->set_halt(ep, 1);
-}
-
-/**
- * usb_ep_fifo_status - returns number of bytes in fifo, or error
- * @ep: the endpoint whose fifo status is being checked.
- *
- * FIFO endpoints may have "unclaimed data" in them in certain cases,
- * such as after aborted transfers.  Hosts may not have collected all
- * the IN data written by the gadget driver (and reported by a request
- * completion).  The gadget driver may not have collected all the data
- * written OUT to it by the host.  Drivers that need precise handling for
- * fault reporting or recovery may need to use this call.
- *
- * This returns the number of such bytes in the fifo, or a negative
- * errno if the endpoint doesn't use a FIFO or doesn't support such
- * precise handling.
- */
+{ return 0; }
+static inline int usb_ep_set_wedge(struct usb_ep *ep)
+{ return 0; }
 static inline int usb_ep_fifo_status(struct usb_ep *ep)
-{
-	if (ep->ops->fifo_status)
-		return ep->ops->fifo_status(ep);
-	else
-		return -EOPNOTSUPP;
-}
-
-/**
- * usb_ep_fifo_flush - flushes contents of a fifo
- * @ep: the endpoint whose fifo is being flushed.
- *
- * This call may be used to flush the "unclaimed data" that may exist in
- * an endpoint fifo after abnormal transaction terminations.  The call
- * must never be used except when endpoint is not being used for any
- * protocol translation.
- */
+{ return 0; }
 static inline void usb_ep_fifo_flush(struct usb_ep *ep)
-{
-	if (ep->ops->fifo_flush)
-		ep->ops->fifo_flush(ep);
-}
-
+{ }
+#endif /* USB_GADGET */
 
 /*-------------------------------------------------------------------------*/
 
@@ -582,6 +326,7 @@ struct usb_gadget_ops {
  * @dev: Driver model state for this abstract device.
  * @out_epnum: last used out ep number
  * @in_epnum: last used in ep number
+ * @mA: last set mA value
  * @otg_caps: OTG capabilities of this gadget.
  * @sg_supported: true if we can handle scatter-gather
  * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
@@ -638,6 +383,7 @@ struct usb_gadget {
 	struct device			dev;
 	unsigned			out_epnum;
 	unsigned			in_epnum;
+	unsigned			mA;
 	struct usb_otg_caps		*otg_caps;
 
 	unsigned			sg_supported:1;
@@ -760,251 +506,44 @@ static inline int gadget_is_otg(struct usb_gadget *g)
 #endif
 }
 
-/**
- * usb_gadget_frame_number - returns the current frame number
- * @gadget: controller that reports the frame number
- *
- * Returns the usb frame number, normally eleven bits from a SOF packet,
- * or negative errno if this device doesn't support this capability.
- */
-static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
-{
-	return gadget->ops->get_frame(gadget);
-}
+/*-------------------------------------------------------------------------*/
 
-/**
- * usb_gadget_wakeup - tries to wake up the host connected to this gadget
- * @gadget: controller used to wake up the host
- *
- * Returns zero on success, else negative error code if the hardware
- * doesn't support such attempts, or its support has not been enabled
- * by the usb host.  Drivers must return device descriptors that report
- * their ability to support this, or hosts won't enable it.
- *
- * This may also try to use SRP to wake the host and start enumeration,
- * even if OTG isn't otherwise in use.  OTG devices may also start
- * remote wakeup even when hosts don't explicitly enable it.
- */
+#if IS_ENABLED(CONFIG_USB_GADGET)
+int usb_gadget_frame_number(struct usb_gadget *gadget);
+int usb_gadget_wakeup(struct usb_gadget *gadget);
+int usb_gadget_set_selfpowered(struct usb_gadget *gadget);
+int usb_gadget_clear_selfpowered(struct usb_gadget *gadget);
+int usb_gadget_vbus_connect(struct usb_gadget *gadget);
+int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA);
+int usb_gadget_vbus_disconnect(struct usb_gadget *gadget);
+int usb_gadget_connect(struct usb_gadget *gadget);
+int usb_gadget_disconnect(struct usb_gadget *gadget);
+int usb_gadget_deactivate(struct usb_gadget *gadget);
+int usb_gadget_activate(struct usb_gadget *gadget);
+#else
+static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
+{ return 0; }
 static inline int usb_gadget_wakeup(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->wakeup)
-		return -EOPNOTSUPP;
-	return gadget->ops->wakeup(gadget);
-}
-
-/**
- * usb_gadget_set_selfpowered - sets the device selfpowered feature.
- * @gadget:the device being declared as self-powered
- *
- * this affects the device status reported by the hardware driver
- * to reflect that it now has a local power supply.
- *
- * returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->set_selfpowered)
-		return -EOPNOTSUPP;
-	return gadget->ops->set_selfpowered(gadget, 1);
-}
-
-/**
- * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
- * @gadget:the device being declared as bus-powered
- *
- * this affects the device status reported by the hardware driver.
- * some hardware may not support bus-powered operation, in which
- * case this feature's value can never change.
- *
- * returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->set_selfpowered)
-		return -EOPNOTSUPP;
-	return gadget->ops->set_selfpowered(gadget, 0);
-}
-
-/**
- * usb_gadget_vbus_connect - Notify controller that VBUS is powered
- * @gadget:The device which now has VBUS power.
- * Context: can sleep
- *
- * This call is used by a driver for an external transceiver (or GPIO)
- * that detects a VBUS power session starting.  Common responses include
- * resuming the controller, activating the D+ (or D-) pullup to let the
- * host detect that a USB device is attached, and starting to draw power
- * (8mA or possibly more, especially after SET_CONFIGURATION).
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_connect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->vbus_session)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_session(gadget, 1);
-}
-
-/**
- * usb_gadget_vbus_draw - constrain controller's VBUS power usage
- * @gadget:The device whose VBUS usage is being described
- * @mA:How much current to draw, in milliAmperes.  This should be twice
- *	the value listed in the configuration descriptor bMaxPower field.
- *
- * This call is used by gadget drivers during SET_CONFIGURATION calls,
- * reporting how much power the device may consume.  For example, this
- * could affect how quickly batteries are recharged.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
-{
-	if (!gadget->ops->vbus_draw)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_draw(gadget, mA);
-}
-
-/**
- * usb_gadget_vbus_disconnect - notify controller about VBUS session end
- * @gadget:the device whose VBUS supply is being described
- * Context: can sleep
- *
- * This call is used by a driver for an external transceiver (or GPIO)
- * that detects a VBUS power session ending.  Common responses include
- * reversing everything done in usb_gadget_vbus_connect().
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->vbus_session)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_session(gadget, 0);
-}
-
-/**
- * usb_gadget_connect - software-controlled connect to USB host
- * @gadget:the peripheral being connected
- *
- * Enables the D+ (or potentially D-) pullup.  The host will start
- * enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered).  This pullup is always enabled unless
- * usb_gadget_disconnect() has been used to disable it.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_connect(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (!gadget->ops->pullup)
-		return -EOPNOTSUPP;
-
-	if (gadget->deactivated) {
-		/*
-		 * If gadget is deactivated we only save new state.
-		 * Gadget will be connected automatically after activation.
-		 */
-		gadget->connected = true;
-		return 0;
-	}
-
-	ret = gadget->ops->pullup(gadget, 1);
-	if (!ret)
-		gadget->connected = 1;
-	return ret;
-}
-
-/**
- * usb_gadget_disconnect - software-controlled disconnect from USB host
- * @gadget:the peripheral being disconnected
- *
- * Disables the D+ (or potentially D-) pullup, which the host may see
- * as a disconnect (when a VBUS session is active).  Not all systems
- * support software pullup controls.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (!gadget->ops->pullup)
-		return -EOPNOTSUPP;
-
-	if (gadget->deactivated) {
-		/*
-		 * If gadget is deactivated we only save new state.
-		 * Gadget will stay disconnected after activation.
-		 */
-		gadget->connected = false;
-		return 0;
-	}
-
-	ret = gadget->ops->pullup(gadget, 0);
-	if (!ret)
-		gadget->connected = 0;
-	return ret;
-}
-
-/**
- * usb_gadget_deactivate - deactivate function which is not ready to work
- * @gadget: the peripheral being deactivated
- *
- * This routine may be used during the gadget driver bind() call to prevent
- * the peripheral from ever being visible to the USB host, unless later
- * usb_gadget_activate() is called.  For example, user mode components may
- * need to be activated before the system can talk to hosts.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_deactivate(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (gadget->deactivated)
-		return 0;
-
-	if (gadget->connected) {
-		ret = usb_gadget_disconnect(gadget);
-		if (ret)
-			return ret;
-		/*
-		 * If gadget was being connected before deactivation, we want
-		 * to reconnect it in usb_gadget_activate().
-		 */
-		gadget->connected = true;
-	}
-	gadget->deactivated = true;
-
-	return 0;
-}
-
-/**
- * usb_gadget_activate - activate function which is not ready to work
- * @gadget: the peripheral being activated
- *
- * This routine activates gadget which was previously deactivated with
- * usb_gadget_deactivate() call. It calls usb_gadget_connect() if needed.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_activate(struct usb_gadget *gadget)
-{
-	if (!gadget->deactivated)
-		return 0;
-
-	gadget->deactivated = false;
-
-	/*
-	 * If gadget has been connected before deactivation, or became connected
-	 * while it was being deactivated, we call usb_gadget_connect().
-	 */
-	if (gadget->connected)
-		return usb_gadget_connect(gadget);
-
-	return 0;
-}
+{ return 0; }
+#endif /* CONFIG_USB_GADGET */
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
deleted file mode 100644
index 8c8f6854c993..000000000000
--- a/include/linux/usb/msm_hsusb.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* linux/include/asm-arm/arch-msm/hsusb.h
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HSUSB_H
-#define __ASM_ARCH_MSM_HSUSB_H
-
-#include <linux/extcon.h>
-#include <linux/types.h>
-#include <linux/usb/otg.h>
-#include <linux/clk.h>
-
-/**
- * OTG control
- *
- * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
- *                      only configuration.
- * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
- * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
- * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
- *
- */
-enum otg_control_type {
-	OTG_NO_CONTROL = 0,
-	OTG_PHY_CONTROL,
-	OTG_PMIC_CONTROL,
-	OTG_USER_CONTROL,
-};
-
-/**
- * PHY used in
- *
- * INVALID_PHY			Unsupported PHY
- * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
- * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
- *
- */
-enum msm_usb_phy_type {
-	INVALID_PHY = 0,
-	CI_45NM_INTEGRATED_PHY,
-	SNPS_28NM_INTEGRATED_PHY,
-};
-
-#define IDEV_CHG_MAX	1500
-#define IUNIT		100
-
-/**
- * Different states involved in USB charger detection.
- *
- * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
- *                              process is not yet started.
- * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
- * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
- * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
- *                              between SDP and DCP/CDP).
- * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
- *                              between DCP and CDP).
- * USB_CHG_STATE_DETECTED	USB charger type is determined.
- *
- */
-enum usb_chg_state {
-	USB_CHG_STATE_UNDEFINED = 0,
-	USB_CHG_STATE_WAIT_FOR_DCD,
-	USB_CHG_STATE_DCD_DONE,
-	USB_CHG_STATE_PRIMARY_DONE,
-	USB_CHG_STATE_SECONDARY_DONE,
-	USB_CHG_STATE_DETECTED,
-};
-
-/**
- * USB charger types
- *
- * USB_INVALID_CHARGER	Invalid USB charger.
- * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
- *                      on USB2.0 compliant host/hub.
- * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
- * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
- *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
- *
- */
-enum usb_chg_type {
-	USB_INVALID_CHARGER = 0,
-	USB_SDP_CHARGER,
-	USB_DCP_CHARGER,
-	USB_CDP_CHARGER,
-};
-
-/**
- * struct msm_otg_platform_data - platform device data
- *              for msm_otg driver.
- * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
- *              "do not overwrite default vaule at this address".
- * @phy_init_sz: PHY configuration sequence size.
- * @vbus_power: VBUS power on/off routine.
- * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
- * @mode: Supported mode (OTG/peripheral/host).
- * @otg_control: OTG switch controlled by user/Id pin
- */
-struct msm_otg_platform_data {
-	int *phy_init_seq;
-	int phy_init_sz;
-	void (*vbus_power)(bool on);
-	unsigned power_budget;
-	enum usb_dr_mode mode;
-	enum otg_control_type otg_control;
-	enum msm_usb_phy_type phy_type;
-	void (*setup_gpio)(enum usb_otg_state state);
-};
-
-/**
- * struct msm_usb_cable - structure for exteternal connector cable
- *			  state tracking
- * @nb: hold event notification callback
- * @conn: used for notification registration
- */
-struct msm_usb_cable {
-	struct notifier_block		nb;
-	struct extcon_dev		*extcon;
-};
-
-/**
- * struct msm_otg: OTG driver data. Shared by HCD and DCD.
- * @otg: USB OTG Transceiver structure.
- * @pdata: otg device platform data.
- * @irq: IRQ number assigned for HSUSB controller.
- * @clk: clock struct of usb_hs_clk.
- * @pclk: clock struct of usb_hs_pclk.
- * @core_clk: clock struct of usb_hs_core_clk.
- * @regs: ioremapped register base address.
- * @inputs: OTG state machine inputs(Id, SessValid etc).
- * @sm_work: OTG state machine work.
- * @in_lpm: indicates low power mode (LPM) state.
- * @async_int: Async interrupt arrived.
- * @cur_power: The amount of mA available from downstream port.
- * @chg_work: Charger detection work.
- * @chg_state: The state of charger detection process.
- * @chg_type: The type of charger attached.
- * @dcd_retires: The retry count used to track Data contact
- *               detection process.
- * @manual_pullup: true if VBUS is not routed to USB controller/phy
- *	and controller driver therefore enables pull-up explicitly before
- *	starting controller using usbcmd run/stop bit.
- * @vbus: VBUS signal state trakining, using extcon framework
- * @id: ID signal state trakining, using extcon framework
- * @switch_gpio: Descriptor for GPIO used to control external Dual
- *               SPDT USB Switch.
- * @reboot: Used to inform the driver to route USB D+/D- line to Device
- *	    connector
- */
-struct msm_otg {
-	struct usb_phy phy;
-	struct msm_otg_platform_data *pdata;
-	int irq;
-	struct clk *clk;
-	struct clk *pclk;
-	struct clk *core_clk;
-	void __iomem *regs;
-#define ID		0
-#define B_SESS_VLD	1
-	unsigned long inputs;
-	struct work_struct sm_work;
-	atomic_t in_lpm;
-	int async_int;
-	unsigned cur_power;
-	int phy_number;
-	struct delayed_work chg_work;
-	enum usb_chg_state chg_state;
-	enum usb_chg_type chg_type;
-	u8 dcd_retries;
-	struct regulator *v3p3;
-	struct regulator *v1p8;
-	struct regulator *vddcx;
-
-	struct reset_control *phy_rst;
-	struct reset_control *link_rst;
-	int vdd_levels[3];
-
-	bool manual_pullup;
-
-	struct msm_usb_cable vbus;
-	struct msm_usb_cable id;
-
-	struct gpio_desc *switch_gpio;
-	struct notifier_block reboot;
-};
-
-#endif
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
index de3237fce6b2..5ff9032ee1b4 100644
--- a/include/linux/usb/of.h
+++ b/include/linux/usb/of.h
@@ -12,7 +12,7 @@
 #include <linux/usb/phy.h>
 
 #if IS_ENABLED(CONFIG_OF)
-enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np);
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0);
 bool of_usb_host_tpl_support(struct device_node *np);
 int of_usb_update_otg_caps(struct device_node *np,
 			struct usb_otg_caps *otg_caps);
@@ -20,7 +20,7 @@ struct device_node *usb_of_get_child_node(struct device_node *parent,
 			int portnum);
 #else
 static inline enum usb_dr_mode
-of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
 {
 	return USB_DR_MODE_UNKNOWN;
 }