Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits)
  dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle
  dmaengine/ep93xx_dma: add module.h include
  pch_dma: Reduce wasting memory
  pch_dma: Fix suspend issue
  dma/timberdale: free_irq() on an error path
  dma: shdma: transfer based runtime PM
  dmaengine: shdma: protect against the IRQ handler
  dmaengine i.MX DMA/SDMA: add missing include of linux/module.h
  dmaengine: delete redundant chan_id and chancnt initialization in dma drivers
  dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool
  dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers
  serial: sh-sci: don't filter on DMA device, use only channel ID
  ARM: SAMSUNG: Remove Samsung specific enum type for dma direction
  ASoC: Samsung: Update DMA interface
  spi/s3c64xx: Merge dma control code
  spi/s3c64xx: Add support DMA engine API
  ARM: SAMSUNG: Remove S3C-PL330-DMA driver
  ARM: S5P64X0: Use generic DMA PL330 driver
  ARM: S5PC100: Use generic DMA PL330 driver
  ARM: S5PV210: Use generic DMA PL330 driver
  ...

Fix up fairly trivial conflicts in
 - arch/arm/mach-exynos4/{Kconfig,clock.c}
 - arch/arm/mach-s5p64x0/dma.c

4 files changed, 37 insertions, 14 deletions

diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h
index e6e28f37d8ec..9eabffbc4e50 100644
--- a/include/linux/amba/pl08x.h
+++ b/include/linux/amba/pl08x.h
@@ -47,6 +47,9 @@ enum {
  * @muxval: a number usually used to poke into some mux regiser to
  * mux in the signal to this channel
  * @cctl_opt: default options for the channel control register
+ * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
+ * channels. Fill with 'true' if peripheral should be flow controller. Direction
+ * will be selected at Runtime.
  * @addr: source/target address in physical memory for this DMA channel,
  * can be the address of a FIFO register for burst requests for example.
  * This can be left undefined if the PrimeCell API is used for configuring
@@ -65,6 +68,7 @@ struct pl08x_channel_data {
 	int max_signal;
 	u32 muxval;
 	u32 cctl;
+	bool device_fc;
 	dma_addr_t addr;
 	bool circular_buffer;
 	bool single;
@@ -77,13 +81,11 @@ struct pl08x_channel_data {
  * @addr: current address
  * @maxwidth: the maximum width of a transfer on this bus
  * @buswidth: the width of this bus in bytes: 1, 2 or 4
- * @fill_bytes: bytes required to fill to the next bus memory boundary
  */
 struct pl08x_bus_data {
 	dma_addr_t addr;
 	u8 maxwidth;
 	u8 buswidth;
-	size_t fill_bytes;
 };
 
 /**
@@ -104,17 +106,35 @@ struct pl08x_phy_chan {
 };
 
 /**
+ * struct pl08x_sg - structure containing data per sg
+ * @src_addr: src address of sg
+ * @dst_addr: dst address of sg
+ * @len: transfer len in bytes
+ * @node: node for txd's dsg_list
+ */
+struct pl08x_sg {
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	size_t len;
+	struct list_head node;
+};
+
+/**
  * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
+ * @tx: async tx descriptor
+ * @node: node for txd list for channels
+ * @dsg_list: list of children sg's
+ * @direction: direction of transfer
  * @llis_bus: DMA memory address (physical) start for the LLIs
  * @llis_va: virtual memory address start for the LLIs
+ * @cctl: control reg values for current txd
+ * @ccfg: config reg values for current txd
  */
 struct pl08x_txd {
 	struct dma_async_tx_descriptor tx;
 	struct list_head node;
+	struct list_head dsg_list;
 	enum dma_data_direction	direction;
-	dma_addr_t src_addr;
-	dma_addr_t dst_addr;
-	size_t len;
 	dma_addr_t llis_bus;
 	struct pl08x_lli *llis_va;
 	/* Default cctl value for LLIs */
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
index cbee7de7dd36..d12f077a6daf 100644
--- a/include/linux/amba/pl330.h
+++ b/include/linux/amba/pl330.h
@@ -19,12 +19,8 @@ struct dma_pl330_peri {
 	 * Peri_Req i/f of the DMAC that is
 	 * peripheral could be reached from.
 	 */
-	u8 peri_id; /* {0, 31} */
+	u8 peri_id; /* specific dma id */
 	enum pl330_reqtype rqtype;
-
-	/* For M->D and D->M Channels */
-	int burst_sz; /* in power of 2 */
-	dma_addr_t fifo_addr;
 };
 
 struct dma_pl330_platdata {
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 8fbf40e0713c..ace51af4369f 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -24,8 +24,7 @@
 #include <linux/device.h>
 #include <linux/uio.h>
 #include <linux/dma-direction.h>
-
-struct scatterlist;
+#include <linux/scatterlist.h>
 
 /**
  * typedef dma_cookie_t - an opaque DMA cookie
@@ -519,6 +518,16 @@ static inline int dmaengine_slave_config(struct dma_chan *chan,
 			(unsigned long)config);
 }
 
+static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single(
+	struct dma_chan *chan, void *buf, size_t len,
+	enum dma_data_direction dir, unsigned long flags)
+{
+	struct scatterlist sg;
+	sg_init_one(&sg, buf, len);
+
+	return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags);
+}
+
 static inline int dmaengine_terminate_all(struct dma_chan *chan)
 {
 	return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 8bffe9ae2ca0..0efa1f10bc2b 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -131,8 +131,6 @@ struct plat_sci_port {
 
 	struct plat_sci_port_ops	*ops;
 
-	struct device	*dma_dev;
-
 	unsigned int	dma_slave_tx;
 	unsigned int	dma_slave_rx;
 };