UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

379 files changed, 250 insertions, 60011 deletions

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index e2a1346514a6..5b57367e28db 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -22,389 +22,10 @@ header-y += wimax/
 
 ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
 		  $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),)
-header-y += a.out.h
 endif
 ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
 		  $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),)
-header-y += kvm.h
 endif
 ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
 		  $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),)
-header-y += kvm_para.h
 endif
-
-header-y += acct.h
-header-y += adb.h
-header-y += adfs_fs.h
-header-y += affs_hardblocks.h
-header-y += agpgart.h
-header-y += aio_abi.h
-header-y += apm_bios.h
-header-y += arcfb.h
-header-y += atalk.h
-header-y += atm.h
-header-y += atm_eni.h
-header-y += atm_he.h
-header-y += atm_idt77105.h
-header-y += atm_nicstar.h
-header-y += atm_tcp.h
-header-y += atm_zatm.h
-header-y += atmapi.h
-header-y += atmarp.h
-header-y += atmbr2684.h
-header-y += atmclip.h
-header-y += atmdev.h
-header-y += atmioc.h
-header-y += atmlec.h
-header-y += atmmpc.h
-header-y += atmppp.h
-header-y += atmsap.h
-header-y += atmsvc.h
-header-y += audit.h
-header-y += auto_fs.h
-header-y += auto_fs4.h
-header-y += auxvec.h
-header-y += ax25.h
-header-y += b1lli.h
-header-y += baycom.h
-header-y += bfs_fs.h
-header-y += binfmts.h
-header-y += blkpg.h
-header-y += blktrace_api.h
-header-y += bpqether.h
-header-y += bsg.h
-header-y += can.h
-header-y += capability.h
-header-y += capi.h
-header-y += cciss_defs.h
-header-y += cciss_ioctl.h
-header-y += cdrom.h
-header-y += cgroupstats.h
-header-y += chio.h
-header-y += cm4000_cs.h
-header-y += cn_proc.h
-header-y += coda.h
-header-y += coda_psdev.h
-header-y += coff.h
-header-y += connector.h
-header-y += const.h
-header-y += cramfs_fs.h
-header-y += cuda.h
-header-y += cyclades.h
-header-y += cycx_cfm.h
-header-y += dcbnl.h
-header-y += dccp.h
-header-y += dlm.h
-header-y += dlm_device.h
-header-y += dlm_netlink.h
-header-y += dlm_plock.h
-header-y += dlmconstants.h
-header-y += dm-ioctl.h
-header-y += dm-log-userspace.h
-header-y += dn.h
-header-y += dqblk_xfs.h
-header-y += edd.h
-header-y += efs_fs_sb.h
-header-y += elf-em.h
-header-y += elf-fdpic.h
-header-y += elf.h
-header-y += elfcore.h
-header-y += errno.h
-header-y += errqueue.h
-header-y += ethtool.h
-header-y += eventpoll.h
-header-y += fadvise.h
-header-y += falloc.h
-header-y += fanotify.h
-header-y += fb.h
-header-y += fcntl.h
-header-y += fd.h
-header-y += fdreg.h
-header-y += fib_rules.h
-header-y += fiemap.h
-header-y += filter.h
-header-y += firewire-cdev.h
-header-y += firewire-constants.h
-header-y += flat.h
-header-y += fs.h
-header-y += fsl_hypervisor.h
-header-y += fuse.h
-header-y += futex.h
-header-y += gameport.h
-header-y += gen_stats.h
-header-y += genetlink.h
-header-y += gfs2_ondisk.h
-header-y += gigaset_dev.h
-header-y += hdlc.h
-header-y += hdlcdrv.h
-header-y += hdreg.h
-header-y += hid.h
-header-y += hiddev.h
-header-y += hidraw.h
-header-y += hpet.h
-header-y += hysdn_if.h
-header-y += i2c-dev.h
-header-y += i2c.h
-header-y += i2o-dev.h
-header-y += i8k.h
-header-y += icmp.h
-header-y += icmpv6.h
-header-y += if.h
-header-y += if_addr.h
-header-y += if_addrlabel.h
-header-y += if_alg.h
-header-y += if_arcnet.h
-header-y += if_arp.h
-header-y += if_bonding.h
-header-y += if_bridge.h
-header-y += if_cablemodem.h
-header-y += if_eql.h
-header-y += if_ether.h
-header-y += if_fc.h
-header-y += if_fddi.h
-header-y += if_frad.h
-header-y += if_hippi.h
-header-y += if_infiniband.h
-header-y += if_link.h
-header-y += if_ltalk.h
-header-y += if_packet.h
-header-y += if_phonet.h
-header-y += if_plip.h
-header-y += if_ppp.h
-header-y += if_pppol2tp.h
-header-y += if_pppox.h
-header-y += if_slip.h
-header-y += if_team.h
-header-y += if_tun.h
-header-y += if_tunnel.h
-header-y += if_vlan.h
-header-y += if_x25.h
-header-y += igmp.h
-header-y += in.h
-header-y += in6.h
-header-y += in_route.h
-header-y += sock_diag.h
-header-y += inet_diag.h
-header-y += unix_diag.h
-header-y += packet_diag.h
-header-y += inotify.h
-header-y += input.h
-header-y += ioctl.h
-header-y += ip.h
-header-y += ip6_tunnel.h
-header-y += ip_vs.h
-header-y += ipc.h
-header-y += ipmi.h
-header-y += ipmi_msgdefs.h
-header-y += ipsec.h
-header-y += ipv6.h
-header-y += ipv6_route.h
-header-y += ipx.h
-header-y += irda.h
-header-y += irqnr.h
-header-y += isdn.h
-header-y += isdn_divertif.h
-header-y += isdn_ppp.h
-header-y += isdnif.h
-header-y += iso_fs.h
-header-y += ivtv.h
-header-y += ivtvfb.h
-header-y += ixjuser.h
-header-y += jffs2.h
-header-y += joystick.h
-header-y += kd.h
-header-y += kdev_t.h
-header-y += kernel.h
-header-y += kernelcapi.h
-header-y += kernel-page-flags.h
-header-y += kexec.h
-header-y += keyboard.h
-header-y += keyctl.h
-header-y += l2tp.h
-header-y += limits.h
-header-y += llc.h
-header-y += loop.h
-header-y += lp.h
-header-y += magic.h
-header-y += major.h
-header-y += map_to_7segment.h
-header-y += matroxfb.h
-header-y += mdio.h
-header-y += media.h
-header-y += mei.h
-header-y += mempolicy.h
-header-y += meye.h
-header-y += mii.h
-header-y += minix_fs.h
-header-y += mman.h
-header-y += mmtimer.h
-header-y += mqueue.h
-header-y += mroute.h
-header-y += mroute6.h
-header-y += msdos_fs.h
-header-y += msg.h
-header-y += mtio.h
-header-y += n_r3964.h
-header-y += nbd.h
-header-y += ncp.h
-header-y += ncp_fs.h
-header-y += ncp_mount.h
-header-y += ncp_no.h
-header-y += neighbour.h
-header-y += net.h
-header-y += net_dropmon.h
-header-y += net_tstamp.h
-header-y += netdevice.h
-header-y += netfilter.h
-header-y += netfilter_arp.h
-header-y += netfilter_bridge.h
-header-y += netfilter_decnet.h
-header-y += netfilter_ipv4.h
-header-y += netfilter_ipv6.h
-header-y += netlink.h
-header-y += netrom.h
-header-y += nfc.h
-header-y += nfs.h
-header-y += nfs2.h
-header-y += nfs3.h
-header-y += nfs4.h
-header-y += nfs4_mount.h
-header-y += nfs_fs.h
-header-y += nfs_idmap.h
-header-y += nfs_mount.h
-header-y += nfsacl.h
-header-y += nl80211.h
-header-y += nubus.h
-header-y += nvram.h
-header-y += omap3isp.h
-header-y += omapfb.h
-header-y += oom.h
-header-y += param.h
-header-y += parport.h
-header-y += patchkey.h
-header-y += pci.h
-header-y += pci_regs.h
-header-y += perf_event.h
-header-y += personality.h
-header-y += pfkeyv2.h
-header-y += pg.h
-header-y += phantom.h
-header-y += phonet.h
-header-y += pkt_cls.h
-header-y += pkt_sched.h
-header-y += pktcdvd.h
-header-y += pmu.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ppdev.h
-header-y += ppp-comp.h
-header-y += ppp-ioctl.h
-header-y += ppp_defs.h
-header-y += pps.h
-header-y += prctl.h
-header-y += ptp_clock.h
-header-y += ptrace.h
-header-y += qnx4_fs.h
-header-y += qnxtypes.h
-header-y += quota.h
-header-y += radeonfb.h
-header-y += random.h
-header-y += raw.h
-header-y += rds.h
-header-y += reboot.h
-header-y += reiserfs_fs.h
-header-y += reiserfs_xattr.h
-header-y += resource.h
-header-y += rfkill.h
-header-y += romfs_fs.h
-header-y += rose.h
-header-y += route.h
-header-y += rtc.h
-header-y += rtnetlink.h
-header-y += scc.h
-header-y += sched.h
-header-y += screen_info.h
-header-y += sdla.h
-header-y += seccomp.h
-header-y += securebits.h
-header-y += selinux_netlink.h
-header-y += sem.h
-header-y += serial.h
-header-y += serial_core.h
-header-y += serial_reg.h
-header-y += serio.h
-header-y += shm.h
-header-y += signal.h
-header-y += signalfd.h
-header-y += snmp.h
-header-y += socket.h
-header-y += sockios.h
-header-y += som.h
-header-y += sonet.h
-header-y += sonypi.h
-header-y += sound.h
-header-y += soundcard.h
-header-y += stat.h
-header-y += stddef.h
-header-y += string.h
-header-y += suspend_ioctls.h
-header-y += swab.h
-header-y += synclink.h
-header-y += sysctl.h
-header-y += sysinfo.h
-header-y += taskstats.h
-header-y += tcp.h
-header-y += tcp_metrics.h
-header-y += telephony.h
-header-y += termios.h
-header-y += time.h
-header-y += times.h
-header-y += timex.h
-header-y += tiocl.h
-header-y += tipc.h
-header-y += tipc_config.h
-header-y += toshiba.h
-header-y += tty.h
-header-y += tty_flags.h
-header-y += types.h
-header-y += udf_fs_i.h
-header-y += udp.h
-header-y += uhid.h
-header-y += uinput.h
-header-y += uio.h
-header-y += ultrasound.h
-header-y += un.h
-header-y += unistd.h
-header-y += usbdevice_fs.h
-header-y += utime.h
-header-y += utsname.h
-header-y += uuid.h
-header-y += uvcvideo.h
-header-y += v4l2-common.h
-header-y += v4l2-controls.h
-header-y += v4l2-dv-timings.h
-header-y += v4l2-mediabus.h
-header-y += v4l2-subdev.h
-header-y += veth.h
-header-y += vfio.h
-header-y += vhost.h
-header-y += videodev2.h
-header-y += virtio_9p.h
-header-y += virtio_balloon.h
-header-y += virtio_blk.h
-header-y += virtio_config.h
-header-y += virtio_console.h
-header-y += virtio_ids.h
-header-y += virtio_net.h
-header-y += virtio_pci.h
-header-y += virtio_ring.h
-header-y += virtio_rng.h
-header-y += vt.h
-header-y += wait.h
-header-y += wanrouter.h
-header-y += watchdog.h
-header-y += wimax.h
-header-y += wireless.h
-header-y += x25.h
-header-y += xattr.h
-header-y += xfrm.h
diff --git a/include/linux/a.out.h b/include/linux/a.out.h
index e86dfca44589..220f14338895 100644
--- a/include/linux/a.out.h
+++ b/include/linux/a.out.h
@@ -1,278 +1,84 @@
 #ifndef __A_OUT_GNU_H__
 #define __A_OUT_GNU_H__
 
-#define __GNU_EXEC_MACROS__
-
-#ifndef __STRUCT_EXEC_OVERRIDE__
-
-#include <asm/a.out.h>
-
-#endif /* __STRUCT_EXEC_OVERRIDE__ */
+#include <uapi/linux/a.out.h>
 
 #ifndef __ASSEMBLY__
-
-/* these go in the N_MACHTYPE field */
-enum machine_type {
 #if defined (M_OLDSUN2)
-  M__OLDSUN2 = M_OLDSUN2,
 #else
-  M_OLDSUN2 = 0,
 #endif
 #if defined (M_68010)
-  M__68010 = M_68010,
 #else
-  M_68010 = 1,
 #endif
 #if defined (M_68020)
-  M__68020 = M_68020,
 #else
-  M_68020 = 2,
 #endif
 #if defined (M_SPARC)
-  M__SPARC = M_SPARC,
 #else
-  M_SPARC = 3,
 #endif
-  /* skip a bunch so we don't run into any of sun's numbers */
-  M_386 = 100,
-  M_MIPS1 = 151,	/* MIPS R3000/R3000 binary */
-  M_MIPS2 = 152		/* MIPS R6000/R4000 binary */
-};
-
 #if !defined (N_MAGIC)
-#define N_MAGIC(exec) ((exec).a_info & 0xffff)
 #endif
-#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
-#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
-#define N_SET_INFO(exec, magic, type, flags) \
-	((exec).a_info = ((magic) & 0xffff) \
-	 | (((int)(type) & 0xff) << 16) \
-	 | (((flags) & 0xff) << 24))
-#define N_SET_MAGIC(exec, magic) \
-	((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
-
-#define N_SET_MACHTYPE(exec, machtype) \
-	((exec).a_info = \
-	 ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
-
-#define N_SET_FLAGS(exec, flags) \
-	((exec).a_info = \
-	 ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
-
-/* Code indicating object file or impure executable.  */
-#define OMAGIC 0407
-/* Code indicating pure executable.  */
-#define NMAGIC 0410
-/* Code indicating demand-paged executable.  */
-#define ZMAGIC 0413
-/* This indicates a demand-paged executable with the header in the text. 
-   The first page is unmapped to help trap NULL pointer references */
-#define QMAGIC 0314
-
-/* Code indicating core file.  */
-#define CMAGIC 0421
-
 #if !defined (N_BADMAG)
-#define N_BADMAG(x)	  (N_MAGIC(x) != OMAGIC		\
-			&& N_MAGIC(x) != NMAGIC		\
-  			&& N_MAGIC(x) != ZMAGIC \
-		        && N_MAGIC(x) != QMAGIC)
 #endif
-
-#define _N_HDROFF(x) (1024 - sizeof (struct exec))
-
 #if !defined (N_TXTOFF)
-#define N_TXTOFF(x) \
- (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
-  (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
 #endif
-
 #if !defined (N_DATOFF)
-#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
 #endif
-
 #if !defined (N_TRELOFF)
-#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
 #endif
-
 #if !defined (N_DRELOFF)
-#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
 #endif
-
 #if !defined (N_SYMOFF)
-#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
 #endif
-
 #if !defined (N_STROFF)
-#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
 #endif
-
-/* Address of text segment in memory after it is loaded.  */
 #if !defined (N_TXTADDR)
-#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
 #endif
-
-/* Address of data segment in memory after it is loaded.
-   Note that it is up to you to define SEGMENT_SIZE
-   on machines not listed here.  */
 #if defined(vax) || defined(hp300) || defined(pyr)
-#define SEGMENT_SIZE page_size
 #endif
 #ifdef	sony
-#define	SEGMENT_SIZE	0x2000
 #endif	/* Sony.  */
 #ifdef is68k
-#define SEGMENT_SIZE 0x20000
 #endif
 #if defined(m68k) && defined(PORTAR)
-#define PAGE_SIZE 0x400
-#define SEGMENT_SIZE PAGE_SIZE
 #endif
-
 #ifdef linux
-#ifdef __KERNEL__
 #include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
 #if defined(__i386__) || defined(__mc68000__)
-#define SEGMENT_SIZE	1024
 #else
 #ifndef SEGMENT_SIZE
-#ifdef __KERNEL__
 #define SEGMENT_SIZE	PAGE_SIZE
-#else
-#define SEGMENT_SIZE   getpagesize()
-#endif
 #endif
 #endif
 #endif
-
-#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
-
-#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
-
 #ifndef N_DATADDR
-#define N_DATADDR(x) \
-    (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
-     : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
 #endif
-
-/* Address of bss segment in memory after it is loaded.  */
 #if !defined (N_BSSADDR)
-#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
 #endif
-
 #if !defined (N_NLIST_DECLARED)
-struct nlist {
-  union {
-    char *n_name;
-    struct nlist *n_next;
-    long n_strx;
-  } n_un;
-  unsigned char n_type;
-  char n_other;
-  short n_desc;
-  unsigned long n_value;
-};
 #endif /* no N_NLIST_DECLARED.  */
-
 #if !defined (N_UNDF)
-#define N_UNDF 0
 #endif
 #if !defined (N_ABS)
-#define N_ABS 2
 #endif
 #if !defined (N_TEXT)
-#define N_TEXT 4
 #endif
 #if !defined (N_DATA)
-#define N_DATA 6
 #endif
 #if !defined (N_BSS)
-#define N_BSS 8
 #endif
 #if !defined (N_FN)
-#define N_FN 15
 #endif
-
 #if !defined (N_EXT)
-#define N_EXT 1
 #endif
 #if !defined (N_TYPE)
-#define N_TYPE 036
 #endif
 #if !defined (N_STAB)
-#define N_STAB 0340
 #endif
-
-/* The following type indicates the definition of a symbol as being
-   an indirect reference to another symbol.  The other symbol
-   appears as an undefined reference, immediately following this symbol.
-
-   Indirection is asymmetrical.  The other symbol's value will be used
-   to satisfy requests for the indirect symbol, but not vice versa.
-   If the other symbol does not have a definition, libraries will
-   be searched to find a definition.  */
-#define N_INDR 0xa
-
-/* The following symbols refer to set elements.
-   All the N_SET[ATDB] symbols with the same name form one set.
-   Space is allocated for the set in the text section, and each set
-   element's value is stored into one word of the space.
-   The first word of the space is the length of the set (number of elements).
-
-   The address of the set is made into an N_SETV symbol
-   whose name is the same as the name of the set.
-   This symbol acts like a N_DATA global symbol
-   in that it can satisfy undefined external references.  */
-
-/* These appear as input to LD, in a .o file.  */
-#define	N_SETA	0x14		/* Absolute set element symbol */
-#define	N_SETT	0x16		/* Text set element symbol */
-#define	N_SETD	0x18		/* Data set element symbol */
-#define	N_SETB	0x1A		/* Bss set element symbol */
-
-/* This is output from LD.  */
-#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
-
 #if !defined (N_RELOCATION_INFO_DECLARED)
-/* This structure describes a single relocation to be performed.
-   The text-relocation section of the file is a vector of these structures,
-   all of which apply to the text section.
-   Likewise, the data-relocation section applies to the data section.  */
-
-struct relocation_info
-{
-  /* Address (within segment) to be relocated.  */
-  int r_address;
-  /* The meaning of r_symbolnum depends on r_extern.  */
-  unsigned int r_symbolnum:24;
-  /* Nonzero means value is a pc-relative offset
-     and it should be relocated for changes in its own address
-     as well as for changes in the symbol or section specified.  */
-  unsigned int r_pcrel:1;
-  /* Length (as exponent of 2) of the field to be relocated.
-     Thus, a value of 2 indicates 1<<2 bytes.  */
-  unsigned int r_length:2;
-  /* 1 => relocate with value of symbol.
-          r_symbolnum is the index of the symbol
-	  in file's the symbol table.
-     0 => relocate with the address of a segment.
-          r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
-	  (the N_EXT bit may be set also, but signifies nothing).  */
-  unsigned int r_extern:1;
-  /* Four bits that aren't used, but when writing an object file
-     it is desirable to clear them.  */
 #ifdef NS32K
-  unsigned r_bsr:1;
-  unsigned r_disp:1;
-  unsigned r_pad:2;
 #else
-  unsigned int r_pad:4;
 #endif
-};
 #endif /* no N_RELOCATION_INFO_DECLARED.  */
-
 #endif /*__ASSEMBLY__ */
 #endif /* __A_OUT_GNU_H__ */
diff --git a/include/linux/acct.h b/include/linux/acct.h
index d537aa0ec414..4a5b7cb56079 100644
--- a/include/linux/acct.h
+++ b/include/linux/acct.h
@@ -11,109 +11,11 @@
  *  Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
  *
  */
-
 #ifndef _LINUX_ACCT_H
 #define _LINUX_ACCT_H
 
-#include <linux/types.h>
-
-#include <asm/param.h>
-#include <asm/byteorder.h>
-
-/* 
- *  comp_t is a 16-bit "floating" point number with a 3-bit base 8
- *  exponent and a 13-bit fraction.
- *  comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
- *  (leading 1 not stored).
- *  See linux/kernel/acct.c for the specific encoding systems used.
- */
-
-typedef __u16	comp_t;
-typedef __u32	comp2_t;
-
-/*
- *   accounting file record
- *
- *   This structure contains all of the information written out to the
- *   process accounting file whenever a process exits.
- */
+#include <uapi/linux/acct.h>
 
-#define ACCT_COMM	16
-
-struct acct
-{
-	char		ac_flag;		/* Flags */
-	char		ac_version;		/* Always set to ACCT_VERSION */
-	/* for binary compatibility back until 2.0 */
-	__u16		ac_uid16;		/* LSB of Real User ID */
-	__u16		ac_gid16;		/* LSB of Real Group ID */
-	__u16		ac_tty;			/* Control Terminal */
-	__u32		ac_btime;		/* Process Creation Time */
-	comp_t		ac_utime;		/* User Time */
-	comp_t		ac_stime;		/* System Time */
-	comp_t		ac_etime;		/* Elapsed Time */
-	comp_t		ac_mem;			/* Average Memory Usage */
-	comp_t		ac_io;			/* Chars Transferred */
-	comp_t		ac_rw;			/* Blocks Read or Written */
-	comp_t		ac_minflt;		/* Minor Pagefaults */
-	comp_t		ac_majflt;		/* Major Pagefaults */
-	comp_t		ac_swaps;		/* Number of Swaps */
-/* m68k had no padding here. */
-#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
-	__u16		ac_ahz;			/* AHZ */
-#endif
-	__u32		ac_exitcode;		/* Exitcode */
-	char		ac_comm[ACCT_COMM + 1];	/* Command Name */
-	__u8		ac_etime_hi;		/* Elapsed Time MSB */
-	__u16		ac_etime_lo;		/* Elapsed Time LSB */
-	__u32		ac_uid;			/* Real User ID */
-	__u32		ac_gid;			/* Real Group ID */
-};
-
-struct acct_v3
-{
-	char		ac_flag;		/* Flags */
-	char		ac_version;		/* Always set to ACCT_VERSION */
-	__u16		ac_tty;			/* Control Terminal */
-	__u32		ac_exitcode;		/* Exitcode */
-	__u32		ac_uid;			/* Real User ID */
-	__u32		ac_gid;			/* Real Group ID */
-	__u32		ac_pid;			/* Process ID */
-	__u32		ac_ppid;		/* Parent Process ID */
-	__u32		ac_btime;		/* Process Creation Time */
-#ifdef __KERNEL__
-	__u32		ac_etime;		/* Elapsed Time */
-#else
-	float		ac_etime;		/* Elapsed Time */
-#endif
-	comp_t		ac_utime;		/* User Time */
-	comp_t		ac_stime;		/* System Time */
-	comp_t		ac_mem;			/* Average Memory Usage */
-	comp_t		ac_io;			/* Chars Transferred */
-	comp_t		ac_rw;			/* Blocks Read or Written */
-	comp_t		ac_minflt;		/* Minor Pagefaults */
-	comp_t		ac_majflt;		/* Major Pagefaults */
-	comp_t		ac_swaps;		/* Number of Swaps */
-	char		ac_comm[ACCT_COMM];	/* Command Name */
-};
-
-/*
- *  accounting flags
- */
-				/* bit set when the process ... */
-#define AFORK		0x01	/* ... executed fork, but did not exec */
-#define ASU		0x02	/* ... used super-user privileges */
-#define ACOMPAT		0x04	/* ... used compatibility mode (VAX only not used) */
-#define ACORE		0x08	/* ... dumped core */
-#define AXSIG		0x10	/* ... was killed by a signal */
-
-#ifdef __BIG_ENDIAN
-#define ACCT_BYTEORDER	0x80	/* accounting file is big endian */
-#else
-#define ACCT_BYTEORDER	0x00	/* accounting file is little endian */
-#endif
-
-#ifdef __KERNEL__
 
 
 #ifdef CONFIG_BSD_PROCESS_ACCT
@@ -163,12 +65,6 @@ typedef struct acct_v3 acct_t;
 typedef struct acct acct_t;
 #endif
 
-#else
-#define ACCT_VERSION	2
-#define AHZ		(HZ)
-#endif	/* __KERNEL */
-
-#ifdef __KERNEL__
 #include <linux/jiffies.h>
 /*
  * Yet another set of HZ to *HZ helper functions.
@@ -210,6 +106,4 @@ static inline u64 nsec_to_AHZ(u64 x)
 	return x;
 }
 
-#endif  /* __KERNEL */
-
 #endif	/* _LINUX_ACCT_H */
diff --git a/include/linux/adb.h b/include/linux/adb.h
index 63bca502fa55..cde41300c7ad 100644
--- a/include/linux/adb.h
+++ b/include/linux/adb.h
@@ -4,43 +4,8 @@
 #ifndef __ADB_H
 #define __ADB_H
 
-/* ADB commands */
-#define ADB_BUSRESET		0
-#define ADB_FLUSH(id)		(0x01 | ((id) << 4))
-#define ADB_WRITEREG(id, reg)	(0x08 | (reg) | ((id) << 4))
-#define ADB_READREG(id, reg)	(0x0C | (reg) | ((id) << 4))
+#include <uapi/linux/adb.h>
 
-/* ADB default device IDs (upper 4 bits of ADB command byte) */
-#define ADB_DONGLE	1	/* "software execution control" devices */
-#define ADB_KEYBOARD	2
-#define ADB_MOUSE	3
-#define ADB_TABLET	4
-#define ADB_MODEM	5
-#define ADB_MISC	7	/* maybe a monitor */
-
-#define ADB_RET_OK	0
-#define ADB_RET_TIMEOUT	3
-
-/* The kind of ADB request. The controller may emulate some
-   or all of those CUDA/PMU packet kinds */
-#define ADB_PACKET	0
-#define CUDA_PACKET	1
-#define ERROR_PACKET	2
-#define TIMER_PACKET	3
-#define POWER_PACKET	4
-#define MACIIC_PACKET	5
-#define PMU_PACKET	6
-#define ADB_QUERY	7
-
-/* ADB queries */
-
-/* ADB_QUERY_GETDEVINFO
- * Query ADB slot for device presence
- * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
- */
-#define ADB_QUERY_GETDEVINFO	1
-
-#ifdef __KERNEL__
 
 struct adb_request {
 	unsigned char data[32];
@@ -98,6 +63,4 @@ int adb_reset_bus(void);
 int adb_try_handler_change(int address, int new_id);
 int adb_get_infos(int address, int *original_address, int *handler_id);
 
-#endif /* __KERNEL__ */
-
 #endif /* __ADB_H */
diff --git a/include/linux/adfs_fs.h b/include/linux/adfs_fs.h
index b19801f73890..0d991071a9d4 100644
--- a/include/linux/adfs_fs.h
+++ b/include/linux/adfs_fs.h
@@ -1,47 +1,9 @@
 #ifndef _ADFS_FS_H
 #define _ADFS_FS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/adfs_fs.h>
 
 /*
- * Disc Record at disc address 0xc00
- */
-struct adfs_discrecord {
-    __u8  log2secsize;
-    __u8  secspertrack;
-    __u8  heads;
-    __u8  density;
-    __u8  idlen;
-    __u8  log2bpmb;
-    __u8  skew;
-    __u8  bootoption;
-    __u8  lowsector;
-    __u8  nzones;
-    __le16 zone_spare;
-    __le32 root;
-    __le32 disc_size;
-    __le16 disc_id;
-    __u8  disc_name[10];
-    __le32 disc_type;
-    __le32 disc_size_high;
-    __u8  log2sharesize:4;
-    __u8  unused40:4;
-    __u8  big_flag:1;
-    __u8  unused41:1;
-    __u8  nzones_high;
-    __le32 format_version;
-    __le32 root_size;
-    __u8  unused52[60 - 52];
-};
-
-#define ADFS_DISCRECORD		(0xc00)
-#define ADFS_DR_OFFSET		(0x1c0)
-#define ADFS_DR_SIZE		 60
-#define ADFS_DR_SIZE_BITS	(ADFS_DR_SIZE << 3)
-
-#ifdef __KERNEL__
-/*
  * Calculate the boot block checksum on an ADFS drive.  Note that this will
  * appear to be correct if the sector contains all zeros, so also check that
  * the disk size is non-zero!!!
@@ -59,5 +21,3 @@ static inline int adfs_checkbblk(unsigned char *ptr)
 	return (result & 0xff) != ptr[511];
 }
 #endif
-
-#endif
diff --git a/include/linux/affs_hardblocks.h b/include/linux/affs_hardblocks.h
deleted file mode 100644
index f1b948c1f592..000000000000
--- a/include/linux/affs_hardblocks.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef	AFFS_HARDBLOCKS_H
-#define	AFFS_HARDBLOCKS_H
-
-#include <linux/types.h>
-
-/* Just the needed definitions for the RDB of an Amiga HD. */
-
-struct RigidDiskBlock {
-	__u32	rdb_ID;
-	__be32	rdb_SummedLongs;
-	__s32	rdb_ChkSum;
-	__u32	rdb_HostID;
-	__be32	rdb_BlockBytes;
-	__u32	rdb_Flags;
-	__u32	rdb_BadBlockList;
-	__be32	rdb_PartitionList;
-	__u32	rdb_FileSysHeaderList;
-	__u32	rdb_DriveInit;
-	__u32	rdb_Reserved1[6];
-	__u32	rdb_Cylinders;
-	__u32	rdb_Sectors;
-	__u32	rdb_Heads;
-	__u32	rdb_Interleave;
-	__u32	rdb_Park;
-	__u32	rdb_Reserved2[3];
-	__u32	rdb_WritePreComp;
-	__u32	rdb_ReducedWrite;
-	__u32	rdb_StepRate;
-	__u32	rdb_Reserved3[5];
-	__u32	rdb_RDBBlocksLo;
-	__u32	rdb_RDBBlocksHi;
-	__u32	rdb_LoCylinder;
-	__u32	rdb_HiCylinder;
-	__u32	rdb_CylBlocks;
-	__u32	rdb_AutoParkSeconds;
-	__u32	rdb_HighRDSKBlock;
-	__u32	rdb_Reserved4;
-	char	rdb_DiskVendor[8];
-	char	rdb_DiskProduct[16];
-	char	rdb_DiskRevision[4];
-	char	rdb_ControllerVendor[8];
-	char	rdb_ControllerProduct[16];
-	char	rdb_ControllerRevision[4];
-	__u32	rdb_Reserved5[10];
-};
-
-#define	IDNAME_RIGIDDISK	0x5244534B	/* "RDSK" */
-
-struct PartitionBlock {
-	__be32	pb_ID;
-	__be32	pb_SummedLongs;
-	__s32	pb_ChkSum;
-	__u32	pb_HostID;
-	__be32	pb_Next;
-	__u32	pb_Flags;
-	__u32	pb_Reserved1[2];
-	__u32	pb_DevFlags;
-	__u8	pb_DriveName[32];
-	__u32	pb_Reserved2[15];
-	__be32	pb_Environment[17];
-	__u32	pb_EReserved[15];
-};
-
-#define	IDNAME_PARTITION	0x50415254	/* "PART" */
-
-#define RDB_ALLOCATION_LIMIT	16
-
-#endif	/* AFFS_HARDBLOCKS_H */
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
index f6778eceb8f4..c6b61ca97053 100644
--- a/include/linux/agpgart.h
+++ b/include/linux/agpgart.h
@@ -23,94 +23,12 @@
  * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  *
  */
-
 #ifndef _AGP_H
 #define _AGP_H 1
 
-#define AGPIOC_BASE       'A'
-#define AGPIOC_INFO       _IOR (AGPIOC_BASE, 0, struct agp_info*)
-#define AGPIOC_ACQUIRE    _IO  (AGPIOC_BASE, 1)
-#define AGPIOC_RELEASE    _IO  (AGPIOC_BASE, 2)
-#define AGPIOC_SETUP      _IOW (AGPIOC_BASE, 3, struct agp_setup*)
-#define AGPIOC_RESERVE    _IOW (AGPIOC_BASE, 4, struct agp_region*)
-#define AGPIOC_PROTECT    _IOW (AGPIOC_BASE, 5, struct agp_region*)
-#define AGPIOC_ALLOCATE   _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
-#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
-#define AGPIOC_BIND       _IOW (AGPIOC_BASE, 8, struct agp_bind*)
-#define AGPIOC_UNBIND     _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
-#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
-
-#define AGP_DEVICE      "/dev/agpgart"
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef __KERNEL__
-#include <linux/types.h>
-
-struct agp_version {
-	__u16 major;
-	__u16 minor;
-};
-
-typedef struct _agp_info {
-	struct agp_version version;	/* version of the driver        */
-	__u32 bridge_id;	/* bridge vendor/device         */
-	__u32 agp_mode;		/* mode info of bridge          */
-	unsigned long aper_base;/* base of aperture             */
-	size_t aper_size;	/* size of aperture             */
-	size_t pg_total;	/* max pages (swap + system)    */
-	size_t pg_system;	/* max pages (system)           */
-	size_t pg_used;		/* current pages used           */
-} agp_info;
-
-typedef struct _agp_setup {
-	__u32 agp_mode;		/* mode info of bridge          */
-} agp_setup;
-
-/*
- * The "prot" down below needs still a "sleep" flag somehow ...
- */
-typedef struct _agp_segment {
-	__kernel_off_t pg_start;	/* starting page to populate    */
-	__kernel_size_t pg_count;	/* number of pages              */
-	int prot;			/* prot flags for mmap          */
-} agp_segment;
-
-typedef struct _agp_region {
-	__kernel_pid_t pid;		/* pid of process       */
-	__kernel_size_t seg_count;	/* number of segments   */
-	struct _agp_segment *seg_list;
-} agp_region;
-
-typedef struct _agp_allocate {
-	int key;		/* tag of allocation            */
-	__kernel_size_t pg_count;/* number of pages             */
-	__u32 type;		/* 0 == normal, other devspec   */
-   	__u32 physical;         /* device specific (some devices  
-				 * need a phys address of the     
-				 * actual page behind the gatt    
-				 * table)                        */
-} agp_allocate;
-
-typedef struct _agp_bind {
-	int key;		/* tag of allocation            */
-	__kernel_off_t pg_start;/* starting page to populate    */
-} agp_bind;
-
-typedef struct _agp_unbind {
-	int key;		/* tag of allocation            */
-	__u32 priority;		/* priority for paging out      */
-} agp_unbind;
-
-#else				/* __KERNEL__ */
 #include <linux/mutex.h>
 #include <linux/agp_backend.h>
+#include <uapi/linux/agpgart.h>
 
 #define AGPGART_MINOR 175
 
@@ -209,6 +127,4 @@ struct agp_front_data {
 	bool backend_acquired;
 };
 
-#endif				/* __KERNEL__ */
-
 #endif				/* _AGP_H */
diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h
deleted file mode 100644
index 86fa7a71336a..000000000000
--- a/include/linux/aio_abi.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/* include/linux/aio_abi.h
- *
- * Copyright 2000,2001,2002 Red Hat.
- *
- * Written by Benjamin LaHaise <bcrl@kvack.org>
- *
- * Distribute under the terms of the GPLv2 (see ../../COPYING) or under 
- * the following terms.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied.  Red Hat makes no representations about
- * the suitability of this software for any purpose.
- *
- * IN NO EVENT SHALL RED HAT BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
- * SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
- * THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF RED HAT HAS BEEN ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * RED HAT DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS, AND
- * RED HAT HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES,
- * ENHANCEMENTS, OR MODIFICATIONS.
- */
-#ifndef __LINUX__AIO_ABI_H
-#define __LINUX__AIO_ABI_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-typedef __kernel_ulong_t aio_context_t;
-
-enum {
-	IOCB_CMD_PREAD = 0,
-	IOCB_CMD_PWRITE = 1,
-	IOCB_CMD_FSYNC = 2,
-	IOCB_CMD_FDSYNC = 3,
-	/* These two are experimental.
-	 * IOCB_CMD_PREADX = 4,
-	 * IOCB_CMD_POLL = 5,
-	 */
-	IOCB_CMD_NOOP = 6,
-	IOCB_CMD_PREADV = 7,
-	IOCB_CMD_PWRITEV = 8,
-};
-
-/*
- * Valid flags for the "aio_flags" member of the "struct iocb".
- *
- * IOCB_FLAG_RESFD - Set if the "aio_resfd" member of the "struct iocb"
- *                   is valid.
- */
-#define IOCB_FLAG_RESFD		(1 << 0)
-
-/* read() from /dev/aio returns these structures. */
-struct io_event {
-	__u64		data;		/* the data field from the iocb */
-	__u64		obj;		/* what iocb this event came from */
-	__s64		res;		/* result code for this event */
-	__s64		res2;		/* secondary result */
-};
-
-#if defined(__LITTLE_ENDIAN)
-#define PADDED(x,y)	x, y
-#elif defined(__BIG_ENDIAN)
-#define PADDED(x,y)	y, x
-#else
-#error edit for your odd byteorder.
-#endif
-
-/*
- * we always use a 64bit off_t when communicating
- * with userland.  its up to libraries to do the
- * proper padding and aio_error abstraction
- */
-
-struct iocb {
-	/* these are internal to the kernel/libc. */
-	__u64	aio_data;	/* data to be returned in event's data */
-	__u32	PADDED(aio_key, aio_reserved1);
-				/* the kernel sets aio_key to the req # */
-
-	/* common fields */
-	__u16	aio_lio_opcode;	/* see IOCB_CMD_ above */
-	__s16	aio_reqprio;
-	__u32	aio_fildes;
-
-	__u64	aio_buf;
-	__u64	aio_nbytes;
-	__s64	aio_offset;
-
-	/* extra parameters */
-	__u64	aio_reserved2;	/* TODO: use this for a (struct sigevent *) */
-
-	/* flags for the "struct iocb" */
-	__u32	aio_flags;
-
-	/*
-	 * if the IOCB_FLAG_RESFD flag of "aio_flags" is set, this is an
-	 * eventfd to signal AIO readiness to
-	 */
-	__u32	aio_resfd;
-}; /* 64 bytes */
-
-#undef IFBIG
-#undef IFLITTLE
-
-#endif /* __LINUX__AIO_ABI_H */
-
diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h
index 01a6244c9bc9..9c3a87184f48 100644
--- a/include/linux/apm_bios.h
+++ b/include/linux/apm_bios.h
@@ -1,6 +1,3 @@
-#ifndef _LINUX_APM_H
-#define _LINUX_APM_H
-
 /*
  * Include file for the interface to an APM BIOS
  * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
@@ -15,25 +12,11 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  */
+#ifndef _LINUX_APM_H
+#define _LINUX_APM_H
 
-#include <linux/types.h>
-
-typedef unsigned short	apm_event_t;
-typedef unsigned short	apm_eventinfo_t;
-
-struct apm_bios_info {
-	__u16	version;
-	__u16	cseg;
-	__u32	offset;
-	__u16	cseg_16;
-	__u16	dseg;
-	__u16	flags;
-	__u16	cseg_len;
-	__u16	cseg_16_len;
-	__u16	dseg_len;
-};
+#include <uapi/linux/apm_bios.h>
 
-#ifdef __KERNEL__
 
 #define APM_CS		(GDT_ENTRY_APMBIOS_BASE * 8)
 #define APM_CS_16	(APM_CS + 8)
@@ -110,111 +93,9 @@ struct apm_info {
  */
 extern struct apm_info	apm_info;
 
-#endif	/* __KERNEL__ */
-
-/*
- * Power states
- */
-#define APM_STATE_READY		0x0000
-#define APM_STATE_STANDBY	0x0001
-#define APM_STATE_SUSPEND	0x0002
-#define APM_STATE_OFF		0x0003
-#define APM_STATE_BUSY		0x0004
-#define APM_STATE_REJECT	0x0005
-#define APM_STATE_OEM_SYS	0x0020
-#define APM_STATE_OEM_DEV	0x0040
-
-#define APM_STATE_DISABLE	0x0000
-#define APM_STATE_ENABLE	0x0001
-
-#define APM_STATE_DISENGAGE	0x0000
-#define APM_STATE_ENGAGE	0x0001
-
-/*
- * Events (results of Get PM Event)
- */
-#define APM_SYS_STANDBY		0x0001
-#define APM_SYS_SUSPEND		0x0002
-#define APM_NORMAL_RESUME	0x0003
-#define APM_CRITICAL_RESUME	0x0004
-#define APM_LOW_BATTERY		0x0005
-#define APM_POWER_STATUS_CHANGE	0x0006
-#define APM_UPDATE_TIME		0x0007
-#define APM_CRITICAL_SUSPEND	0x0008
-#define APM_USER_STANDBY	0x0009
-#define APM_USER_SUSPEND	0x000a
-#define APM_STANDBY_RESUME	0x000b
-#define APM_CAPABILITY_CHANGE	0x000c
-
-/*
- * Error codes
- */
-#define APM_SUCCESS		0x00
-#define APM_DISABLED		0x01
-#define APM_CONNECTED		0x02
-#define APM_NOT_CONNECTED	0x03
-#define APM_16_CONNECTED	0x05
-#define APM_16_UNSUPPORTED	0x06
-#define APM_32_CONNECTED	0x07
-#define APM_32_UNSUPPORTED	0x08
-#define APM_BAD_DEVICE		0x09
-#define APM_BAD_PARAM		0x0a
-#define APM_NOT_ENGAGED		0x0b
-#define APM_BAD_FUNCTION	0x0c
-#define APM_RESUME_DISABLED	0x0d
-#define APM_NO_ERROR		0x53
-#define APM_BAD_STATE		0x60
-#define APM_NO_EVENTS		0x80
-#define APM_NOT_PRESENT		0x86
-
-/*
- * APM Device IDs
- */
-#define APM_DEVICE_BIOS		0x0000
-#define APM_DEVICE_ALL		0x0001
-#define APM_DEVICE_DISPLAY	0x0100
-#define APM_DEVICE_STORAGE	0x0200
-#define APM_DEVICE_PARALLEL	0x0300
-#define APM_DEVICE_SERIAL	0x0400
-#define APM_DEVICE_NETWORK	0x0500
-#define APM_DEVICE_PCMCIA	0x0600
-#define APM_DEVICE_BATTERY	0x8000
-#define APM_DEVICE_OEM		0xe000
-#define APM_DEVICE_OLD_ALL	0xffff
-#define APM_DEVICE_CLASS	0x00ff
-#define APM_DEVICE_MASK		0xff00
-
-#ifdef __KERNEL__
 /*
  * This is the "All Devices" ID communicated to the BIOS
  */
 #define APM_DEVICE_BALL		((apm_info.connection_version > 0x0100) ? \
 				 APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
-#endif
-
-/*
- * Battery status
- */
-#define APM_MAX_BATTERIES	2
-
-/*
- * APM defined capability bit flags
- */
-#define APM_CAP_GLOBAL_STANDBY		0x0001
-#define APM_CAP_GLOBAL_SUSPEND		0x0002
-#define APM_CAP_RESUME_STANDBY_TIMER	0x0004 /* Timer resume from standby */
-#define APM_CAP_RESUME_SUSPEND_TIMER	0x0008 /* Timer resume from suspend */
-#define APM_CAP_RESUME_STANDBY_RING	0x0010 /* Resume on Ring fr standby */
-#define APM_CAP_RESUME_SUSPEND_RING	0x0020 /* Resume on Ring fr suspend */
-#define APM_CAP_RESUME_STANDBY_PCMCIA	0x0040 /* Resume on PCMCIA Ring	*/
-#define APM_CAP_RESUME_SUSPEND_PCMCIA	0x0080 /* Resume on PCMCIA Ring	*/
-
-/*
- * ioctl operations
- */
-#include <linux/ioctl.h>
-
-#define APM_IOC_STANDBY		_IO('A', 1)
-#define APM_IOC_SUSPEND		_IO('A', 2)
-
 #endif	/* LINUX_APM_H */
diff --git a/include/linux/arcfb.h b/include/linux/arcfb.h
deleted file mode 100644
index 721e7654daeb..000000000000
--- a/include/linux/arcfb.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __LINUX_ARCFB_H__
-#define __LINUX_ARCFB_H__
-
-#define FBIO_WAITEVENT		_IO('F', 0x88)
-#define FBIO_GETCONTROL2	_IOR('F', 0x89, size_t)
-
-#endif
-
diff --git a/include/linux/atalk.h b/include/linux/atalk.h
index f57c36881c48..73fd8b7e9534 100644
--- a/include/linux/atalk.h
+++ b/include/linux/atalk.h
@@ -1,49 +1,9 @@
 #ifndef __LINUX_ATALK_H__
 #define __LINUX_ATALK_H__
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-/*
- * AppleTalk networking structures
- *
- * The following are directly referenced from the University Of Michigan
- * netatalk for compatibility reasons.
- */
-#define ATPORT_FIRST	1
-#define ATPORT_RESERVED	128
-#define ATPORT_LAST	254		/* 254 is only legal on localtalk */ 
-#define ATADDR_ANYNET	(__u16)0
-#define ATADDR_ANYNODE	(__u8)0
-#define ATADDR_ANYPORT  (__u8)0
-#define ATADDR_BCAST	(__u8)255
-#define DDP_MAXSZ	587
-#define DDP_MAXHOPS     15		/* 4 bits of hop counter */
-
-#define SIOCATALKDIFADDR       (SIOCPROTOPRIVATE + 0)
-
-struct atalk_addr {
-	__be16	s_net;
-	__u8	s_node;
-};
-
-struct sockaddr_at {
-	__kernel_sa_family_t sat_family;
-	__u8		  sat_port;
-	struct atalk_addr sat_addr;
-	char		  sat_zero[8];
-};
-
-struct atalk_netrange {
-	__u8	nr_phase;
-	__be16	nr_firstnet;
-	__be16	nr_lastnet;
-};
-
-#ifdef __KERNEL__
 
 #include <net/sock.h>
+#include <uapi/linux/atalk.h>
 
 struct atalk_route {
 	struct net_device  *dev;
@@ -205,5 +165,4 @@ extern void atalk_proc_exit(void);
 #define atalk_proc_exit()	do { } while(0)
 #endif /* CONFIG_PROC_FS */
 
-#endif /* __KERNEL__ */
 #endif /* __LINUX_ATALK_H__ */
diff --git a/include/linux/atm.h b/include/linux/atm.h
index d3b292174aeb..30006c435951 100644
--- a/include/linux/atm.h
+++ b/include/linux/atm.h
@@ -1,242 +1,9 @@
 /* atm.h - general ATM declarations */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-/*
- * WARNING: User-space programs should not #include <linux/atm.h> directly.
- *          Instead, #include <atm.h>
- */
-
 #ifndef _LINUX_ATM_H
 #define _LINUX_ATM_H
 
-/*
- * BEGIN_xx and END_xx markers are used for automatic generation of
- * documentation. Do not change them.
- */
-
-#include <linux/compiler.h>
-#include <linux/atmapi.h>
-#include <linux/atmsap.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
-
-
-/* general ATM constants */
-#define ATM_CELL_SIZE		    53	/* ATM cell size incl. header */
-#define ATM_CELL_PAYLOAD	    48	/* ATM payload size */
-#define ATM_AAL0_SDU		    52	/* AAL0 SDU size */
-#define ATM_MAX_AAL34_PDU	 65535	/* maximum AAL3/4 PDU payload */
-#define ATM_AAL5_TRAILER	     8	/* AAL5 trailer size */
-#define ATM_MAX_AAL5_PDU	 65535	/* maximum AAL5 PDU payload */
-#define ATM_MAX_CDV		  9999	/* maximum (default) CDV */
-#define ATM_NOT_RSV_VCI		    32	/* first non-reserved VCI value */
-
-#define ATM_MAX_VPI		   255	/* maximum VPI at the UNI */
-#define ATM_MAX_VPI_NNI		  4096	/* maximum VPI at the NNI */
-#define ATM_MAX_VCI		 65535	/* maximum VCI */
-
-
-/* "protcol" values for the socket system call */
-#define ATM_NO_AAL	0		/* AAL not specified */
-#define ATM_AAL0	13		/* "raw" ATM cells */
-#define ATM_AAL1	1		/* AAL1 (CBR) */
-#define ATM_AAL2	2		/* AAL2 (VBR) */
-#define ATM_AAL34	3		/* AAL3/4 (data) */
-#define ATM_AAL5	5		/* AAL5 (data) */
-
-/*
- * socket option name coding functions
- *
- * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
- * << 22 only reserves 9 bits for the level.  On some architectures
- * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
- */
-
-#define __SO_ENCODE(l,n,t)	((((l) & 0x1FF) << 22) | ((n) << 16) | \
-				sizeof(t))
-#define __SO_LEVEL_MATCH(c,m)	(((c) >> 22) == ((m) & 0x1FF))
-#define __SO_NUMBER(c)		(((c) >> 16) & 0x3f)
-#define __SO_SIZE(c)		((c) & 0x3fff)
-
-/*
- * ATM layer
- */
-
-#define SO_SETCLP	__SO_ENCODE(SOL_ATM,0,int)
-			    /* set CLP bit value - TODO */
-#define SO_CIRANGE	__SO_ENCODE(SOL_ATM,1,struct atm_cirange)
-			    /* connection identifier range; socket must be
-			       bound or connected */
-#define SO_ATMQOS	__SO_ENCODE(SOL_ATM,2,struct atm_qos)
-			    /* Quality of Service setting */
-#define SO_ATMSAP	__SO_ENCODE(SOL_ATM,3,struct atm_sap)
-			    /* Service Access Point */
-#define SO_ATMPVC	__SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
-			    /* "PVC" address (also for SVCs); get only */
-#define SO_MULTIPOINT	__SO_ENCODE(SOL_ATM, 5, int)
-			    /* make this vc a p2mp */
-
-
-/*
- * Note @@@: since the socket layers don't really distinguish the control and
- * the data plane but generally seems to be data plane-centric, any layer is
- * about equally wrong for the SAP. If you have a better idea about this,
- * please speak up ...
- */
-
-
-/* ATM cell header (for AAL0) */
-
-/* BEGIN_CH */
-#define ATM_HDR_GFC_MASK	0xf0000000
-#define ATM_HDR_GFC_SHIFT	28
-#define ATM_HDR_VPI_MASK	0x0ff00000
-#define ATM_HDR_VPI_SHIFT	20
-#define ATM_HDR_VCI_MASK	0x000ffff0
-#define ATM_HDR_VCI_SHIFT	4
-#define ATM_HDR_PTI_MASK	0x0000000e
-#define ATM_HDR_PTI_SHIFT	1
-#define ATM_HDR_CLP		0x00000001
-/* END_CH */
-
-
-/* PTI codings */
-
-/* BEGIN_PTI */
-#define ATM_PTI_US0	0  /* user data cell, congestion not exp, SDU-type 0 */
-#define ATM_PTI_US1	1  /* user data cell, congestion not exp, SDU-type 1 */
-#define ATM_PTI_UCES0	2  /* user data cell, cong. experienced, SDU-type 0 */
-#define ATM_PTI_UCES1	3  /* user data cell, cong. experienced, SDU-type 1 */
-#define ATM_PTI_SEGF5	4  /* segment OAM F5 flow related cell */
-#define ATM_PTI_E2EF5	5  /* end-to-end OAM F5 flow related cell */
-#define ATM_PTI_RSV_RM	6  /* reserved for traffic control/resource mgmt */
-#define ATM_PTI_RSV	7  /* reserved */
-/* END_PTI */
-
-
-/*
- * The following items should stay in linux/atm.h, which should be linked to
- * netatm/atm.h
- */
-
-/* Traffic description */
-
-#define ATM_NONE	0		/* no traffic */
-#define ATM_UBR		1
-#define ATM_CBR		2
-#define ATM_VBR		3
-#define ATM_ABR		4
-#define ATM_ANYCLASS	5		/* compatible with everything */
-
-#define ATM_MAX_PCR	-1		/* maximum available PCR */
-
-struct atm_trafprm {
-	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
-	int		max_pcr;	/* maximum PCR in cells per second */
-	int		pcr;		/* desired PCR in cells per second */
-	int		min_pcr;	/* minimum PCR in cells per second */
-	int		max_cdv;	/* maximum CDV in microseconds */
-	int		max_sdu;	/* maximum SDU in bytes */
-        /* extra params for ABR */
-        unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
-        unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
-        unsigned int 	frtt : 24;	/* Fixed Round Trip Time (24-bit) */
-        unsigned int 	rif  : 4;       /* Rate Increment Factor (4-bit) */
-        unsigned int 	rdf  : 4;       /* Rate Decrease Factor (4-bit) */
-        unsigned int nrm_pres  :1;      /* nrm present bit */
-        unsigned int trm_pres  :1;     	/* rm present bit */
-        unsigned int adtf_pres :1;     	/* adtf present bit */
-        unsigned int cdf_pres  :1;    	/* cdf present bit*/
-        unsigned int nrm       :3;     	/* Max # of Cells for each forward RM cell (3-bit) */
-        unsigned int trm       :3;    	/* Time between forward RM cells (3-bit) */    
-	unsigned int adtf      :10;     /* ACR Decrease Time Factor (10-bit) */
-	unsigned int cdf       :3;      /* Cutoff Decrease Factor (3-bit) */
-        unsigned int spare     :9;      /* spare bits */ 
-};
-
-struct atm_qos {
-	struct atm_trafprm txtp;	/* parameters in TX direction */
-	struct atm_trafprm rxtp __ATM_API_ALIGN;
-					/* parameters in RX direction */
-	unsigned char aal __ATM_API_ALIGN;
-};
-
-/* PVC addressing */
-
-#define ATM_ITF_ANY	-1		/* "magic" PVC address values */
-#define ATM_VPI_ANY	-1
-#define ATM_VCI_ANY	-1
-#define ATM_VPI_UNSPEC	-2
-#define ATM_VCI_UNSPEC	-2
-
-
-struct sockaddr_atmpvc {
-	unsigned short 	sap_family;	/* address family, AF_ATMPVC  */
-	struct {			/* PVC address */
-		short	itf;		/* ATM interface */
-		short	vpi;		/* VPI (only 8 bits at UNI) */
-		int	vci;		/* VCI (only 16 bits at UNI) */
-	} sap_addr __ATM_API_ALIGN;	/* PVC address */
-};
-
-/* SVC addressing */
-
-#define	ATM_ESA_LEN	20		/* ATM End System Address length */
-#define ATM_E164_LEN	12		/* maximum E.164 number length */
-
-#define ATM_AFI_DCC	0x39		/* DCC ATM Format */
-#define ATM_AFI_ICD	0x47		/* ICD ATM Format */
-#define ATM_AFI_E164	0x45		/* E.164 ATM Format */
-#define ATM_AFI_LOCAL	0x49		/* Local ATM Format */ 
-
-#define ATM_AFI_DCC_GROUP	0xBD	/* DCC ATM Group Format */
-#define ATM_AFI_ICD_GROUP	0xC5	/* ICD ATM Group Format */
-#define ATM_AFI_E164_GROUP	0xC3	/* E.164 ATM Group Format */
-#define ATM_AFI_LOCAL_GROUP	0xC7	/* Local ATM Group Format */
+#include <uapi/linux/atm.h>
 
-#define ATM_LIJ_NONE	0		/* no leaf-initiated join */
-#define ATM_LIJ		1		/* request joining */
-#define ATM_LIJ_RPJ	2		/* set to root-prompted join */
-#define ATM_LIJ_NJ	3		/* set to network join */
-
-
-struct sockaddr_atmsvc {
-    unsigned short 	sas_family;	/* address family, AF_ATMSVC */
-    struct {				/* SVC address */
-        unsigned char	prv[ATM_ESA_LEN];/* private ATM address */
-        char		pub[ATM_E164_LEN+1]; /* public address (E.164) */
-    					/* unused addresses must be bzero'ed */
-	char		lij_type;	/* role in LIJ call; one of ATM_LIJ* */
-	__u32	lij_id;		/* LIJ call identifier */
-    } sas_addr __ATM_API_ALIGN;		/* SVC address */
-};
-
-
-static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
-{
-	return *addr.sas_addr.prv || *addr.sas_addr.pub;
-}
-
-
-static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
-{
-	return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
-}
-
-
-/*
- * Some stuff for linux/sockios.h
- */
-
-struct atmif_sioc {
-	int number;
-	int length;
-	void __user *arg;
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
 struct compat_atmif_sioc {
@@ -246,6 +13,3 @@ struct compat_atmif_sioc {
 };
 #endif
 #endif
-
-typedef unsigned short atm_backend_t;
-#endif
diff --git a/include/linux/atm_eni.h b/include/linux/atm_eni.h
deleted file mode 100644
index 34f317972551..000000000000
--- a/include/linux/atm_eni.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* atm_eni.h - Driver-specific declarations of the ENI driver (for use by
-	       driver-specific utilities) */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef LINUX_ATM_ENI_H
-#define LINUX_ATM_ENI_H
-
-#include <linux/atmioc.h>
-
-
-struct eni_multipliers {
-	int tx,rx;	/* values are in percent and must be > 100 */
-};
-
-
-#define ENI_MEMDUMP     _IOW('a',ATMIOC_SARPRV,struct atmif_sioc)
-                                                /* printk memory map */
-#define ENI_SETMULT	_IOW('a',ATMIOC_SARPRV+7,struct atmif_sioc)
-						/* set buffer multipliers */
-
-#endif
diff --git a/include/linux/atm_he.h b/include/linux/atm_he.h
deleted file mode 100644
index 2a7713b597cf..000000000000
--- a/include/linux/atm_he.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* atm_he.h */
-
-#ifndef LINUX_ATM_HE_H
-#define LINUX_ATM_HE_H
-
-#include <linux/atmioc.h>
-
-#define HE_GET_REG	_IOW('a', ATMIOC_SARPRV, struct atmif_sioc)
-
-#define HE_REGTYPE_PCI	1
-#define HE_REGTYPE_RCM	2
-#define HE_REGTYPE_TCM	3
-#define HE_REGTYPE_MBOX	4
-
-struct he_ioctl_reg {
-	unsigned addr, val;
-	char type;
-};
-
-#endif /* LINUX_ATM_HE_H */
diff --git a/include/linux/atm_idt77105.h b/include/linux/atm_idt77105.h
deleted file mode 100644
index 8b724000aa50..000000000000
--- a/include/linux/atm_idt77105.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* atm_idt77105.h - Driver-specific declarations of the IDT77105 driver (for
- * use by driver-specific utilities) */
-
-/* Written 1999 by Greg Banks <gnb@linuxfan.com>. Copied from atm_suni.h. */
-
-
-#ifndef LINUX_ATM_IDT77105_H
-#define LINUX_ATM_IDT77105_H
-
-#include <linux/types.h>
-#include <linux/atmioc.h>
-#include <linux/atmdev.h>
-
-/*
- * Structure for IDT77105_GETSTAT and IDT77105_GETSTATZ ioctls.
- * Pointed to by `arg' in atmif_sioc.
- */
-struct idt77105_stats {
-        __u32 symbol_errors;  /* wire symbol errors */
-        __u32 tx_cells;       /* cells transmitted */
-        __u32 rx_cells;       /* cells received */
-        __u32 rx_hec_errors;  /* Header Error Check errors on receive */
-};
-
-#define IDT77105_GETSTAT	_IOW('a',ATMIOC_PHYPRV+2,struct atmif_sioc)	/* get stats */
-#define IDT77105_GETSTATZ	_IOW('a',ATMIOC_PHYPRV+3,struct atmif_sioc)	/* get stats and zero */
-
-#endif
diff --git a/include/linux/atm_nicstar.h b/include/linux/atm_nicstar.h
deleted file mode 100644
index 577b79f33e8d..000000000000
--- a/include/linux/atm_nicstar.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/******************************************************************************
- *
- * atm_nicstar.h
- *
- * Driver-specific declarations for use by NICSTAR driver specific utils.
- *
- * Author: Rui Prior
- *
- * (C) INESC 1998
- *
- ******************************************************************************/
-
-
-#ifndef LINUX_ATM_NICSTAR_H
-#define LINUX_ATM_NICSTAR_H
-
-/* Note: non-kernel programs including this file must also include
- * sys/types.h for struct timeval
- */
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-
-#define NS_GETPSTAT	_IOWR('a',ATMIOC_SARPRV+1,struct atmif_sioc)
-						/* get pool statistics */
-#define NS_SETBUFLEV	_IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
-						/* set buffer level markers */
-#define NS_ADJBUFLEV	_IO('a',ATMIOC_SARPRV+3)
-						/* adjust buffer level */
-
-typedef struct buf_nr
-{
-   unsigned min;
-   unsigned init;
-   unsigned max;
-}buf_nr;
-
-
-typedef struct pool_levels
-{
-   int buftype;
-   int count;		/* (At least for now) only used in NS_GETPSTAT */
-   buf_nr level;
-} pool_levels;
-
-/* type must be one of the following: */
-#define NS_BUFTYPE_SMALL 1
-#define NS_BUFTYPE_LARGE 2
-#define NS_BUFTYPE_HUGE 3
-#define NS_BUFTYPE_IOVEC 4
-
-
-#endif /* LINUX_ATM_NICSTAR_H */
diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h
index 375638f8554b..db6b65fc0aec 100644
--- a/include/linux/atm_tcp.h
+++ b/include/linux/atm_tcp.h
@@ -3,61 +3,11 @@
 
 /* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
 
-
 #ifndef LINUX_ATM_TCP_H
 #define LINUX_ATM_TCP_H
 
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
-
-
-/*
- * All values in struct atmtcp_hdr are in network byte order
- */
-
-struct atmtcp_hdr {
-	__u16	vpi;
-	__u16	vci;
-	__u32	length;		/* ... of data part */
-};
-
-/*
- * All values in struct atmtcp_command are in host byte order
- */
-
-#define ATMTCP_HDR_MAGIC	(~0)	/* this length indicates a command */
-#define ATMTCP_CTRL_OPEN	1	/* request/reply */
-#define ATMTCP_CTRL_CLOSE	2	/* request/reply */
+#include <uapi/linux/atm_tcp.h>
 
-struct atmtcp_control {
-	struct atmtcp_hdr hdr;	/* must be first */
-	int type;		/* message type; both directions */
-	atm_kptr_t vcc;		/* both directions */
-	struct sockaddr_atmpvc addr; /* suggested value from kernel */
-	struct atm_qos	qos;	/* both directions */
-	int result;		/* to kernel only */
-} __ATM_API_ALIGN;
-
-/*
- * Field usage:
- * Messge type	dir.	hdr.v?i	type	addr	qos	vcc	result
- * -----------  ----	------- ----	----	---	---	------
- * OPEN		K->D	Y	Y	Y	Y	Y	0
- * OPEN		D->K	-	Y	Y	Y	Y	Y
- * CLOSE	K->D	-	-	Y	-	Y	0
- * CLOSE	D->K	-	-	-	-	Y	Y
- */
-
-#define SIOCSIFATMTCP	_IO('a',ATMIOC_ITF)	/* set ATMTCP mode */
-#define ATMTCP_CREATE	_IO('a',ATMIOC_ITF+14)	/* create persistent ATMTCP
-						   interface */
-#define ATMTCP_REMOVE	_IO('a',ATMIOC_ITF+15)	/* destroy persistent ATMTCP
-						   interface */
-
-
-#ifdef __KERNEL__
 
 struct atm_tcp_ops {
 	int (*attach)(struct atm_vcc *vcc,int itf);
@@ -69,5 +19,3 @@ struct atm_tcp_ops {
 extern struct atm_tcp_ops atm_tcp_ops;
 
 #endif
-
-#endif
diff --git a/include/linux/atm_zatm.h b/include/linux/atm_zatm.h
deleted file mode 100644
index 10f0fa29454f..000000000000
--- a/include/linux/atm_zatm.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by
-		driver-specific utilities) */
-
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef LINUX_ATM_ZATM_H
-#define LINUX_ATM_ZATM_H
-
-/*
- * Note: non-kernel programs including this file must also include
- * sys/types.h for struct timeval
- */
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-
-#define ZATM_GETPOOL	_IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc)
-						/* get pool statistics */
-#define ZATM_GETPOOLZ	_IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
-						/* get statistics and zero */
-#define ZATM_SETPOOL	_IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc)
-						/* set pool parameters */
-
-struct zatm_pool_info {
-	int ref_count;			/* free buffer pool usage counters */
-	int low_water,high_water;	/* refill parameters */
-	int rqa_count,rqu_count;	/* queue condition counters */
-	int offset,next_off;		/* alignment optimizations: offset */
-	int next_cnt,next_thres;	/* repetition counter and threshold */
-};
-
-struct zatm_pool_req {
-	int pool_num;			/* pool number */
-	struct zatm_pool_info info;	/* actual information */
-};
-
-struct zatm_t_hist {
-	struct timeval real;		/* real (wall-clock) time */
-	struct timeval expected;	/* expected real time */
-};
-
-
-#define ZATM_OAM_POOL		0	/* free buffer pool for OAM cells */
-#define ZATM_AAL0_POOL		1	/* free buffer pool for AAL0 cells */
-#define ZATM_AAL5_POOL_BASE	2	/* first AAL5 free buffer pool */
-#define ZATM_LAST_POOL	ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */
-
-#define ZATM_TIMER_HISTORY_SIZE	16	/* number of timer adjustments to
-					   record; must be 2^n */
-
-#endif
diff --git a/include/linux/atmapi.h b/include/linux/atmapi.h
deleted file mode 100644
index 8fe54d90d95b..000000000000
--- a/include/linux/atmapi.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* atmapi.h - ATM API user space/kernel compatibility */
- 
-/* Written 1999,2000 by Werner Almesberger, EPFL ICA */
- 
-
-#ifndef _LINUX_ATMAPI_H
-#define _LINUX_ATMAPI_H
-
-#if defined(__sparc__) || defined(__ia64__)
-/* such alignment is not required on 32 bit sparcs, but we can't
-   figure that we are on a sparc64 while compiling user-space programs. */
-#define __ATM_API_ALIGN	__attribute__((aligned(8)))
-#else
-#define __ATM_API_ALIGN
-#endif
-
-
-/*
- * Opaque type for kernel pointers. Note that _ is never accessed. We need
- * the struct in order hide the array, so that we can make simple assignments
- * instead of being forced to use memcpy. It also improves error reporting for
- * code that still assumes that we're passing unsigned longs.
- *
- * Convention: NULL pointers are passed as a field of all zeroes.
- */
- 
-typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t;
-
-#endif
diff --git a/include/linux/atmarp.h b/include/linux/atmarp.h
deleted file mode 100644
index 231f4bdec730..000000000000
--- a/include/linux/atmarp.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* atmarp.h - ATM ARP protocol and kernel-demon interface definitions */
- 
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-#ifndef _LINUX_ATMARP_H
-#define _LINUX_ATMARP_H
-
-#include <linux/types.h>
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-
-
-#define ATMARP_RETRY_DELAY 30		/* request next resolution or forget
-					   NAK after 30 sec - should go into
-					   atmclip.h */
-#define ATMARP_MAX_UNRES_PACKETS 5	/* queue that many packets while
-					   waiting for the resolver */
-
-
-#define ATMARPD_CTRL	_IO('a',ATMIOC_CLIP+1)	/* become atmarpd ctrl sock */
-#define ATMARP_MKIP	_IO('a',ATMIOC_CLIP+2)	/* attach socket to IP */
-#define ATMARP_SETENTRY	_IO('a',ATMIOC_CLIP+3)	/* fill or hide ARP entry */
-#define ATMARP_ENCAP	_IO('a',ATMIOC_CLIP+5)	/* change encapsulation */
-
-
-enum atmarp_ctrl_type {
-	act_invalid,		/* catch uninitialized structures */
-	act_need,		/* need address resolution */
-	act_up,			/* interface is coming up */
-	act_down,		/* interface is going down */
-	act_change		/* interface configuration has changed */
-};
-
-struct atmarp_ctrl {
-	enum atmarp_ctrl_type	type;	/* message type */
-	int			itf_num;/* interface number (if present) */
-	__be32			ip;	/* IP address (act_need only) */
-};
-
-#endif
diff --git a/include/linux/atmbr2684.h b/include/linux/atmbr2684.h
deleted file mode 100644
index fdb2629b6189..000000000000
--- a/include/linux/atmbr2684.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef _LINUX_ATMBR2684_H
-#define _LINUX_ATMBR2684_H
-
-#include <linux/types.h>
-#include <linux/atm.h>
-#include <linux/if.h>		/* For IFNAMSIZ */
-
-/*
- * Type of media we're bridging (ethernet, token ring, etc)  Currently only
- * ethernet is supported
- */
-#define BR2684_MEDIA_ETHERNET	(0)	/* 802.3 */
-#define BR2684_MEDIA_802_4	(1)	/* 802.4 */
-#define BR2684_MEDIA_TR		(2)	/* 802.5 - token ring */
-#define BR2684_MEDIA_FDDI	(3)
-#define BR2684_MEDIA_802_6	(4)	/* 802.6 */
-
-					/* used only at device creation:  */
-#define BR2684_FLAG_ROUTED	(1<<16)	/* payload is routed, not bridged */
-
-/*
- * Is there FCS inbound on this VC?  This currently isn't supported.
- */
-#define BR2684_FCSIN_NO		(0)
-#define BR2684_FCSIN_IGNORE	(1)
-#define BR2684_FCSIN_VERIFY	(2)
-
-/*
- * Is there FCS outbound on this VC?  This currently isn't supported.
- */
-#define BR2684_FCSOUT_NO	(0)
-#define BR2684_FCSOUT_SENDZERO	(1)
-#define BR2684_FCSOUT_GENERATE	(2)
-
-/*
- * Does this VC include LLC encapsulation?
- */
-#define BR2684_ENCAPS_VC	(0)	/* VC-mux */
-#define BR2684_ENCAPS_LLC	(1)
-#define BR2684_ENCAPS_AUTODETECT (2)	/* Unsuported */
-
-/*
- * Is this VC bridged or routed?
- */
-
-#define BR2684_PAYLOAD_ROUTED   (0)
-#define BR2684_PAYLOAD_BRIDGED  (1)
-
-/*
- * This is for the ATM_NEWBACKENDIF call - these are like socket families:
- * the first element of the structure is the backend number and the rest
- * is per-backend specific
- */
-struct atm_newif_br2684 {
-	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
-	int media;		/* BR2684_MEDIA_*, flags in upper bits */
-	char ifname[IFNAMSIZ];
-	int mtu;
-};
-
-/*
- * This structure is used to specify a br2684 interface - either by a
- * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
- */
-#define BR2684_FIND_BYNOTHING	(0)
-#define BR2684_FIND_BYNUM	(1)
-#define BR2684_FIND_BYIFNAME	(2)
-struct br2684_if_spec {
-	int method;		/* BR2684_FIND_* */
-	union {
-		char ifname[IFNAMSIZ];
-		int devnum;
-	} spec;
-};
-
-/*
- * This is for the ATM_SETBACKEND call - these are like socket families:
- * the first element of the structure is the backend number and the rest
- * is per-backend specific
- */
-struct atm_backend_br2684 {
-	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
-	struct br2684_if_spec ifspec;
-	int fcs_in;		/* BR2684_FCSIN_* */
-	int fcs_out;		/* BR2684_FCSOUT_* */
-	int fcs_auto;		/* 1: fcs_{in,out} disabled if no FCS rx'ed */
-	int encaps;		/* BR2684_ENCAPS_* */
-	int has_vpiid;		/* 1: use vpn_id - Unsupported */
-	__u8 vpn_id[7];
-	int send_padding;	/* unsupported */
-	int min_size;		/* we will pad smaller packets than this */
-};
-
-/*
- * The BR2684_SETFILT ioctl is an experimental mechanism for folks
- * terminating a large number of IP-only vcc's.  When netfilter allows
- * efficient per-if in/out filters, this support will be removed
- */
-struct br2684_filter {
-	__be32 prefix;		/* network byte order */
-	__be32 netmask;		/* 0 = disable filter */
-};
-
-struct br2684_filter_set {
-	struct br2684_if_spec ifspec;
-	struct br2684_filter filter;
-};
-
-enum br2684_payload {
-	p_routed = BR2684_PAYLOAD_ROUTED,
-	p_bridged = BR2684_PAYLOAD_BRIDGED,
-};
-
-#define BR2684_SETFILT	_IOW( 'a', ATMIOC_BACKEND + 0, \
-				struct br2684_filter_set)
-
-#endif /* _LINUX_ATMBR2684_H */
diff --git a/include/linux/atmclip.h b/include/linux/atmclip.h
deleted file mode 100644
index 02c94c448dd6..000000000000
--- a/include/linux/atmclip.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* atmclip.h - Classical IP over ATM */
- 
-/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-#ifndef LINUX_ATMCLIP_H
-#define LINUX_ATMCLIP_H
-
-#include <linux/sockios.h>
-#include <linux/atmioc.h>
-
-
-#define RFC1483LLC_LEN	8		/* LLC+OUI+PID = 8 */
-#define RFC1626_MTU	9180		/* RFC1626 default MTU */
-
-#define CLIP_DEFAULT_IDLETIMER 1200	/* 20 minutes, see RFC1755 */
-#define CLIP_CHECK_INTERVAL	 10	/* check every ten seconds */
-
-#define	SIOCMKCLIP	_IO('a',ATMIOC_CLIP)	/* create IP interface */
-
-#endif
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index 06fd4bbc58f6..22ef21c33d0c 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -1,218 +1,8 @@
 /* atmdev.h - ATM device driver declarations and various related items */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
 #ifndef LINUX_ATMDEV_H
 #define LINUX_ATMDEV_H
 
 
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-
-
-#define ESI_LEN		6
-
-#define ATM_OC3_PCR	(155520000/270*260/8/53)
-			/* OC3 link rate:  155520000 bps
-			   SONET overhead: /270*260 (9 section, 1 path)
-			   bits per cell:  /8/53
-			   max cell rate:  353207.547 cells/sec */
-#define ATM_25_PCR	((25600000/8-8000)/54)
-			/* 25 Mbps ATM cell rate (59111) */
-#define ATM_OC12_PCR	(622080000/1080*1040/8/53)
-			/* OC12 link rate: 622080000 bps
-			   SONET overhead: /1080*1040
-			   bits per cell:  /8/53
-			   max cell rate:  1412830.188 cells/sec */
-#define ATM_DS3_PCR	(8000*12)
-			/* DS3: 12 cells in a 125 usec time slot */
-
-
-#define __AAL_STAT_ITEMS \
-    __HANDLE_ITEM(tx);			/* TX okay */ \
-    __HANDLE_ITEM(tx_err);		/* TX errors */ \
-    __HANDLE_ITEM(rx);			/* RX okay */ \
-    __HANDLE_ITEM(rx_err);		/* RX errors */ \
-    __HANDLE_ITEM(rx_drop);		/* RX out of memory */
-
-struct atm_aal_stats {
-#define __HANDLE_ITEM(i) int i
-	__AAL_STAT_ITEMS
-#undef __HANDLE_ITEM
-};
-
-
-struct atm_dev_stats {
-	struct atm_aal_stats aal0;
-	struct atm_aal_stats aal34;
-	struct atm_aal_stats aal5;
-} __ATM_API_ALIGN;
-
-
-#define ATM_GETLINKRATE	_IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
-					/* get link rate */
-#define ATM_GETNAMES	_IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
-					/* get interface names (numbers) */
-#define ATM_GETTYPE	_IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
-					/* get interface type name */
-#define ATM_GETESI	_IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
-					/* get interface ESI */
-#define ATM_GETADDR	_IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
-					/* get itf's local ATM addr. list */
-#define ATM_RSTADDR	_IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
-					/* reset itf's ATM address list */
-#define ATM_ADDADDR	_IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
-					/* add a local ATM address */
-#define ATM_DELADDR	_IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
-					/* remove a local ATM address */
-#define ATM_GETCIRANGE	_IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
-					/* get connection identifier range */
-#define ATM_SETCIRANGE	_IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
-					/* set connection identifier range */
-#define ATM_SETESI	_IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
-					/* set interface ESI */
-#define ATM_SETESIF	_IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
-					/* force interface ESI */
-#define ATM_ADDLECSADDR	_IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
-					/* register a LECS address */
-#define ATM_DELLECSADDR	_IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
-					/* unregister a LECS address */
-#define ATM_GETLECSADDR	_IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
-					/* retrieve LECS address(es) */
-
-#define ATM_GETSTAT	_IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
-					/* get AAL layer statistics */
-#define ATM_GETSTATZ	_IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
-					/* get AAL layer statistics and zero */
-#define ATM_GETLOOP	_IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
-					/* get loopback mode */
-#define ATM_SETLOOP	_IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
-					/* set loopback mode */
-#define ATM_QUERYLOOP	_IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
-					/* query supported loopback modes */
-#define ATM_SETSC	_IOW('a',ATMIOC_SPECIAL+1,int)
-					/* enable or disable single-copy */
-#define ATM_SETBACKEND	_IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
-					/* set backend handler */
-#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
-					/* use backend to make new if */
-#define ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
- 					/* add party to p2mp call */
-#ifdef CONFIG_COMPAT
-/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
-#define COMPAT_ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
-#endif
-#define ATM_DROPPARTY 	_IOW('a', ATMIOC_SPECIAL+5,int)
-					/* drop party from p2mp call */
-
-/*
- * These are backend handkers that can be set via the ATM_SETBACKEND call
- * above.  In the future we may support dynamic loading of these - for now,
- * they're just being used to share the ATMIOC_BACKEND ioctls
- */
-#define ATM_BACKEND_RAW		0	
-#define ATM_BACKEND_PPP		1	/* PPPoATM - RFC2364 */
-#define ATM_BACKEND_BR2684	2	/* Bridged RFC1483/2684 */
-
-/* for ATM_GETTYPE */
-#define ATM_ITFTYP_LEN	8	/* maximum length of interface type name */
-
-/*
- * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
- */
-
-/* Point of loopback				CPU-->SAR-->PHY-->line--> ... */
-#define __ATM_LM_NONE	0	/* no loop back     ^     ^     ^      ^      */
-#define __ATM_LM_AAL	1	/* loop back PDUs --'     |     |      |      */
-#define __ATM_LM_ATM	2	/* loop back ATM cells ---'     |      |      */
-/* RESERVED		4	loop back on PHY side  ---'		      */
-#define __ATM_LM_PHY	8	/* loop back bits (digital) ----'      |      */
-#define __ATM_LM_ANALOG 16	/* loop back the analog signal --------'      */
-
-/* Direction of loopback */
-#define __ATM_LM_MKLOC(n)	((n))	    /* Local (i.e. loop TX to RX) */
-#define __ATM_LM_MKRMT(n)	((n) << 8)  /* Remote (i.e. loop RX to TX) */
-
-#define __ATM_LM_XTLOC(n)	((n) & 0xff)
-#define __ATM_LM_XTRMT(n)	(((n) >> 8) & 0xff)
-
-#define ATM_LM_NONE	0	/* no loopback */
-
-#define ATM_LM_LOC_AAL	__ATM_LM_MKLOC(__ATM_LM_AAL)
-#define ATM_LM_LOC_ATM	__ATM_LM_MKLOC(__ATM_LM_ATM)
-#define ATM_LM_LOC_PHY	__ATM_LM_MKLOC(__ATM_LM_PHY)
-#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
-
-#define ATM_LM_RMT_AAL	__ATM_LM_MKRMT(__ATM_LM_AAL)
-#define ATM_LM_RMT_ATM	__ATM_LM_MKRMT(__ATM_LM_ATM)
-#define ATM_LM_RMT_PHY	__ATM_LM_MKRMT(__ATM_LM_PHY)
-#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
-
-/*
- * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
- * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
- */
-
-
-struct atm_iobuf {
-	int length;
-	void __user *buffer;
-};
-
-/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
-
-#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
- 
-struct atm_cirange {
-	signed char	vpi_bits;	/* 1..8, ATM_CI_MAX (-1) for maximum */
-	signed char	vci_bits;	/* 1..16, ATM_CI_MAX (-1) for maximum */
-};
-
-/* for ATM_SETSC; actually taken from the ATM_VF number space */
-
-#define ATM_SC_RX	1024		/* enable RX single-copy */
-#define ATM_SC_TX	2048		/* enable TX single-copy */
-
-#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
-				  anyway */
-
-/* MF: change_qos (Modify) flags */
-
-#define ATM_MF_IMMED	 1	/* Block until change is effective */
-#define ATM_MF_INC_RSV	 2	/* Change reservation on increase */
-#define ATM_MF_INC_SHP	 4	/* Change shaping on increase */
-#define ATM_MF_DEC_RSV	 8	/* Change reservation on decrease */
-#define ATM_MF_DEC_SHP	16	/* Change shaping on decrease */
-#define ATM_MF_BWD	32	/* Set the backward direction parameters */
-
-#define ATM_MF_SET	(ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
-			  ATM_MF_DEC_SHP | ATM_MF_BWD)
-
-/*
- * ATM_VS_* are used to express VC state in a human-friendly way.
- */
-
-#define ATM_VS_IDLE	0	/* VC is not used */
-#define ATM_VS_CONNECTED 1	/* VC is connected */
-#define ATM_VS_CLOSING	2	/* VC is closing */
-#define ATM_VS_LISTEN	3	/* VC is listening for incoming setups */
-#define ATM_VS_INUSE	4	/* VC is in use (registered with atmsigd) */
-#define ATM_VS_BOUND	5	/* VC is bound */
-
-#define ATM_VS2TXT_MAP \
-    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
-
-#define ATM_VF2TXT_MAP \
-    "ADDR",	"READY",	"PARTIAL",	"REGIS", \
-    "RELEASED", "HASQOS",	"LISTEN",	"META", \
-    "256",	"512",		"1024",		"2048", \
-    "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
-
-
-#ifdef __KERNEL__
-
 #include <linux/wait.h> /* wait_queue_head_t */
 #include <linux/time.h> /* struct timeval */
 #include <linux/net.h>
@@ -221,6 +11,7 @@ struct atm_cirange {
 #include <linux/uio.h>
 #include <net/sock.h>
 #include <linux/atomic.h>
+#include <uapi/linux/atmdev.h>
 
 #ifdef CONFIG_PROC_FS
 #include <linux/proc_fs.h>
@@ -521,6 +312,4 @@ void deregister_atm_ioctl(struct atm_ioctl *);
 int register_atmdevice_notifier(struct notifier_block *nb);
 void unregister_atmdevice_notifier(struct notifier_block *nb);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/atmioc.h b/include/linux/atmioc.h
deleted file mode 100644
index 37f67aa8f1c1..000000000000
--- a/include/linux/atmioc.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* atmioc.h - ranges for ATM-related ioctl numbers */
- 
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
-
-
-/*
- * See http://icawww1.epfl.ch/linux-atm/magic.html for the complete list of
- * "magic" ioctl numbers.
- */
-
-
-#ifndef _LINUX_ATMIOC_H
-#define _LINUX_ATMIOC_H
-
-#include <asm/ioctl.h>
-		/* everybody including atmioc.h will also need _IO{,R,W,WR} */
-
-#define ATMIOC_PHYCOM	  0x00 /* PHY device common ioctls, globally unique */
-#define ATMIOC_PHYCOM_END 0x0f
-#define ATMIOC_PHYTYP	  0x10 /* PHY dev type ioctls, unique per PHY type */
-#define ATMIOC_PHYTYP_END 0x2f
-#define ATMIOC_PHYPRV	  0x30 /* PHY dev private ioctls, unique per driver */
-#define ATMIOC_PHYPRV_END 0x4f
-#define ATMIOC_SARCOM	  0x50 /* SAR device common ioctls, globally unique */
-#define ATMIOC_SARCOM_END 0x50
-#define ATMIOC_SARPRV	  0x60 /* SAR dev private ioctls, unique per driver */
-#define ATMIOC_SARPRV_END 0x7f
-#define ATMIOC_ITF	  0x80 /* Interface ioctls, globally unique */
-#define ATMIOC_ITF_END	  0x8f
-#define ATMIOC_BACKEND	  0x90 /* ATM generic backend ioctls, u. per backend */
-#define ATMIOC_BACKEND_END 0xaf
-/* 0xb0-0xbf: Reserved for future use */
-#define ATMIOC_AREQUIPA	  0xc0 /* Application requested IP over ATM, glob. u. */
-#define ATMIOC_LANE	  0xd0 /* LAN Emulation, globally unique */
-#define ATMIOC_MPOA       0xd8 /* MPOA, globally unique */
-#define	ATMIOC_CLIP	  0xe0 /* Classical IP over ATM control, globally u. */
-#define	ATMIOC_CLIP_END	  0xef
-#define	ATMIOC_SPECIAL	  0xf0 /* Special-purpose controls, globally unique */
-#define	ATMIOC_SPECIAL_END 0xff
-
-#endif
diff --git a/include/linux/atmlec.h b/include/linux/atmlec.h
deleted file mode 100644
index 302791e3ab2b..000000000000
--- a/include/linux/atmlec.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * ATM Lan Emulation Daemon driver interface
- *
- * Marko Kiiskila <mkiiskila@yahoo.com>
- */
-
-#ifndef _ATMLEC_H_
-#define _ATMLEC_H_
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-#include <linux/atm.h>
-#include <linux/if_ether.h>
-#include <linux/types.h>
-
-/* ATM lec daemon control socket */
-#define ATMLEC_CTRL	_IO('a', ATMIOC_LANE)
-#define ATMLEC_DATA	_IO('a', ATMIOC_LANE+1)
-#define ATMLEC_MCAST	_IO('a', ATMIOC_LANE+2)
-
-/* Maximum number of LEC interfaces (tweakable) */
-#define MAX_LEC_ITF 48
-
-typedef enum {
-	l_set_mac_addr,
-	l_del_mac_addr,
-	l_svc_setup,
-	l_addr_delete,
-	l_topology_change,
-	l_flush_complete,
-	l_arp_update,
-	l_narp_req,		/* LANE2 mandates the use of this */
-	l_config,
-	l_flush_tran_id,
-	l_set_lecid,
-	l_arp_xmt,
-	l_rdesc_arp_xmt,
-	l_associate_req,
-	l_should_bridge		/* should we bridge this MAC? */
-} atmlec_msg_type;
-
-#define ATMLEC_MSG_TYPE_MAX l_should_bridge
-
-struct atmlec_config_msg {
-	unsigned int maximum_unknown_frame_count;
-	unsigned int max_unknown_frame_time;
-	unsigned short max_retry_count;
-	unsigned int aging_time;
-	unsigned int forward_delay_time;
-	unsigned int arp_response_time;
-	unsigned int flush_timeout;
-	unsigned int path_switching_delay;
-	unsigned int lane_version;	/* LANE2: 1 for LANEv1, 2 for LANEv2 */
-	int mtu;
-	int is_proxy;
-};
-
-struct atmlec_msg {
-	atmlec_msg_type type;
-	int sizeoftlvs;		/* LANE2: if != 0, tlvs follow */
-	union {
-		struct {
-			unsigned char mac_addr[ETH_ALEN];
-			unsigned char atm_addr[ATM_ESA_LEN];
-			unsigned int flag;	/*
-						 * Topology_change flag,
-						 * remoteflag, permanent flag,
-						 * lecid, transaction id
-						 */
-			unsigned int targetless_le_arp;	/* LANE2 */
-			unsigned int no_source_le_narp;	/* LANE2 */
-		} normal;
-		struct atmlec_config_msg config;
-		struct {
-			__u16 lec_id;				/* requestor lec_id  */
-			__u32 tran_id;				/* transaction id    */
-			unsigned char mac_addr[ETH_ALEN];	/* dst mac addr      */
-			unsigned char atm_addr[ATM_ESA_LEN];	/* reqestor ATM addr */
-		} proxy;	/*
-				 * For mapping LE_ARP requests to responses. Filled by
-				 * zeppelin, returned by kernel. Used only when proxying
-				 */
-	} content;
-} __ATM_API_ALIGN;
-
-struct atmlec_ioc {
-	int dev_num;
-	unsigned char atm_addr[ATM_ESA_LEN];
-	unsigned char receive;	/* 1= receive vcc, 0 = send vcc */
-};
-#endif /* _ATMLEC_H_ */
diff --git a/include/linux/atmmpc.h b/include/linux/atmmpc.h
deleted file mode 100644
index 2aba5787fa63..000000000000
--- a/include/linux/atmmpc.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef _ATMMPC_H_
-#define _ATMMPC_H_
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-#include <linux/atm.h>
-#include <linux/types.h>
-
-#define ATMMPC_CTRL _IO('a', ATMIOC_MPOA)
-#define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1)
-
-#define MPC_SOCKET_INGRESS 1
-#define MPC_SOCKET_EGRESS  2
-
-struct atmmpc_ioc {
-        int dev_num;
-        __be32 ipaddr;              /* the IP address of the shortcut    */
-        int type;                     /* ingress or egress                 */
-};
-
-typedef struct in_ctrl_info {
-        __u8   Last_NHRP_CIE_code;
-        __u8   Last_Q2931_cause_value;
-        __u8   eg_MPC_ATM_addr[ATM_ESA_LEN];
-        __be32  tag;
-        __be32  in_dst_ip;      /* IP address this ingress MPC sends packets to */
-        __u16  holding_time;
-        __u32  request_id;
-} in_ctrl_info;
-
-typedef struct eg_ctrl_info {
-        __u8   DLL_header[256];
-        __u8   DH_length;
-        __be32  cache_id;
-        __be32  tag;
-        __be32  mps_ip;
-        __be32  eg_dst_ip;      /* IP address to which ingress MPC sends packets */
-        __u8   in_MPC_data_ATM_addr[ATM_ESA_LEN];
-        __u16  holding_time;
-} eg_ctrl_info;
-
-struct mpc_parameters {
-        __u16 mpc_p1;   /* Shortcut-Setup Frame Count    */
-        __u16 mpc_p2;   /* Shortcut-Setup Frame Time     */
-        __u8 mpc_p3[8]; /* Flow-detection Protocols      */
-        __u16 mpc_p4;   /* MPC Initial Retry Time        */
-        __u16 mpc_p5;   /* MPC Retry Time Maximum        */
-        __u16 mpc_p6;   /* Hold Down Time                */
-} ;
-
-struct k_message {
-        __u16 type;
-        __be32 ip_mask;
-        __u8  MPS_ctrl[ATM_ESA_LEN];
-        union {
-                in_ctrl_info in_info;
-                eg_ctrl_info eg_info;
-                struct mpc_parameters params;
-        } content;
-        struct atm_qos qos;       
-} __ATM_API_ALIGN;
-
-struct llc_snap_hdr {
-	/* RFC 1483 LLC/SNAP encapsulation for routed IP PDUs */
-        __u8  dsap;    /* Destination Service Access Point (0xAA)     */
-        __u8  ssap;    /* Source Service Access Point      (0xAA)     */
-        __u8  ui;      /* Unnumbered Information           (0x03)     */
-        __u8  org[3];  /* Organizational identification    (0x000000) */
-        __u8  type[2]; /* Ether type (for IP)              (0x0800)   */
-};
-
-/* TLVs this MPC recognizes */
-#define TLV_MPOA_DEVICE_TYPE         0x00a03e2a  
-
-/* MPOA device types in MPOA Device Type TLV */
-#define NON_MPOA    0
-#define MPS         1
-#define MPC         2
-#define MPS_AND_MPC 3
-
-
-/* MPC parameter defaults */
-
-#define MPC_P1 10  /* Shortcut-Setup Frame Count  */ 
-#define MPC_P2 1   /* Shortcut-Setup Frame Time   */
-#define MPC_P3 0   /* Flow-detection Protocols    */
-#define MPC_P4 5   /* MPC Initial Retry Time      */
-#define MPC_P5 40  /* MPC Retry Time Maximum      */
-#define MPC_P6 160 /* Hold Down Time              */
-#define HOLDING_TIME_DEFAULT 1200 /* same as MPS-p7 */
-
-/* MPC constants */
-
-#define MPC_C1 2   /* Retry Time Multiplier       */
-#define MPC_C2 60  /* Initial Keep-Alive Lifetime */
-
-/* Message types - to MPOA daemon */
-
-#define SND_MPOA_RES_RQST    201
-#define SET_MPS_CTRL_ADDR    202
-#define SND_MPOA_RES_RTRY    203 /* Different type in a retry due to req id         */
-#define STOP_KEEP_ALIVE_SM   204
-#define EGRESS_ENTRY_REMOVED 205
-#define SND_EGRESS_PURGE     206
-#define DIE                  207 /* tell the daemon to exit()                       */
-#define DATA_PLANE_PURGE     208 /* Data plane purge because of egress cache hit miss or dead MPS */
-#define OPEN_INGRESS_SVC     209
-
-/* Message types - from MPOA daemon */
-
-#define MPOA_TRIGGER_RCVD     101
-#define MPOA_RES_REPLY_RCVD   102
-#define INGRESS_PURGE_RCVD    103
-#define EGRESS_PURGE_RCVD     104
-#define MPS_DEATH             105
-#define CACHE_IMPOS_RCVD      106
-#define SET_MPC_CTRL_ADDR     107 /* Our MPC's control ATM address   */
-#define SET_MPS_MAC_ADDR      108
-#define CLEAN_UP_AND_EXIT     109
-#define SET_MPC_PARAMS        110 /* MPC configuration parameters    */
-
-/* Message types - bidirectional */       
-
-#define RELOAD                301 /* kill -HUP the daemon for reload */
-
-#endif /* _ATMMPC_H_ */
diff --git a/include/linux/atmppp.h b/include/linux/atmppp.h
deleted file mode 100644
index 300dcce0c83f..000000000000
--- a/include/linux/atmppp.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* atmppp.h - RFC2364 PPPoATM */
-
-/* Written 2000 by Mitchell Blank Jr */
-
-#ifndef _LINUX_ATMPPP_H
-#define _LINUX_ATMPPP_H
-
-#include <linux/atm.h>
-
-#define PPPOATM_ENCAPS_AUTODETECT	(0)
-#define PPPOATM_ENCAPS_VC		(1)
-#define PPPOATM_ENCAPS_LLC		(2)
-
-/*
- * This is for the ATM_SETBACKEND call - these are like socket families:
- * the first element of the structure is the backend number and the rest
- * is per-backend specific
- */
-struct atm_backend_ppp {
-	atm_backend_t	backend_num;	/* ATM_BACKEND_PPP */
-	int		encaps;		/* PPPOATM_ENCAPS_* */
-};
-
-#endif	/* _LINUX_ATMPPP_H */
diff --git a/include/linux/atmsap.h b/include/linux/atmsap.h
deleted file mode 100644
index 799b104515d7..000000000000
--- a/include/linux/atmsap.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* atmsap.h - ATM Service Access Point addressing definitions */
-
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef _LINUX_ATMSAP_H
-#define _LINUX_ATMSAP_H
-
-#include <linux/atmapi.h>
-
-/*
- * BEGIN_xx and END_xx markers are used for automatic generation of
- * documentation. Do not change them.
- */
-
-
-/*
- * Layer 2 protocol identifiers
- */
-
-/* BEGIN_L2 */
-#define ATM_L2_NONE	0	/* L2 not specified */
-#define ATM_L2_ISO1745  0x01	/* Basic mode ISO 1745 */
-#define ATM_L2_Q291	0x02	/* ITU-T Q.291 (Rec. I.441) */
-#define ATM_L2_X25_LL	0x06	/* ITU-T X.25, link layer */
-#define ATM_L2_X25_ML	0x07	/* ITU-T X.25, multilink */
-#define ATM_L2_LAPB	0x08	/* Extended LAPB, half-duplex (Rec. T.71) */
-#define ATM_L2_HDLC_ARM	0x09	/* HDLC ARM (ISO/IEC 4335) */
-#define ATM_L2_HDLC_NRM	0x0a	/* HDLC NRM (ISO/IEC 4335) */
-#define ATM_L2_HDLC_ABM	0x0b	/* HDLC ABM (ISO/IEC 4335) */
-#define ATM_L2_ISO8802	0x0c	/* LAN LLC (ISO/IEC 8802/2) */
-#define ATM_L2_X75	0x0d	/* ITU-T X.75, SLP */
-#define ATM_L2_Q922	0x0e	/* ITU-T Q.922 */
-#define ATM_L2_USER	0x10	/* user-specified */
-#define ATM_L2_ISO7776	0x11	/* ISO 7776 DTE-DTE */
-/* END_L2 */
-
-
-/*
- * Layer 3 protocol identifiers
- */
-
-/* BEGIN_L3 */
-#define ATM_L3_NONE	0	/* L3 not specified */
-#define ATM_L3_X25	0x06	/* ITU-T X.25, packet layer */
-#define ATM_L3_ISO8208	0x07	/* ISO/IEC 8208 */
-#define ATM_L3_X223	0x08	/* ITU-T X.223 | ISO/IEC 8878 */
-#define ATM_L3_ISO8473	0x09	/* ITU-T X.233 | ISO/IEC 8473 */
-#define ATM_L3_T70	0x0a	/* ITU-T T.70 minimum network layer */
-#define ATM_L3_TR9577	0x0b	/* ISO/IEC TR 9577 */
-#define ATM_L3_H310	0x0c	/* ITU-T Recommendation H.310 */
-#define ATM_L3_H321	0x0d	/* ITU-T Recommendation H.321 */
-#define ATM_L3_USER	0x10	/* user-specified */
-/* END_L3 */
-
-
-/*
- * High layer identifiers
- */
-
-/* BEGIN_HL */
-#define ATM_HL_NONE	0	/* HL not specified */
-#define ATM_HL_ISO	0x01	/* ISO */
-#define ATM_HL_USER	0x02	/* user-specific */
-#define ATM_HL_HLP	0x03	/* high layer profile - UNI 3.0 only */
-#define ATM_HL_VENDOR	0x04	/* vendor-specific application identifier */
-/* END_HL */
-
-
-/*
- * ITU-T coded mode of operation
- */
-
-/* BEGIN_IMD */
-#define ATM_IMD_NONE	 0	/* mode not specified */
-#define ATM_IMD_NORMAL	 1	/* normal mode of operation */
-#define ATM_IMD_EXTENDED 2	/* extended mode of operation */
-/* END_IMD */
-
-/*
- * H.310 code points
- */
-
-#define ATM_TT_NONE	0	/* terminal type not specified */
-#define ATM_TT_RX	1	/* receive only */
-#define ATM_TT_TX	2	/* send only */
-#define ATM_TT_RXTX	3	/* receive and send */
-
-#define ATM_MC_NONE	0	/* no multiplexing */
-#define ATM_MC_TS	1	/* transport stream (TS) */
-#define ATM_MC_TS_FEC	2	/* transport stream with forward error corr. */
-#define ATM_MC_PS	3	/* program stream (PS) */
-#define ATM_MC_PS_FEC	4	/* program stream with forward error corr. */
-#define ATM_MC_H221	5	/* ITU-T Rec. H.221 */
-
-/*
- * SAP structures
- */
-
-#define ATM_MAX_HLI	8	/* maximum high-layer information length */
-
-
-struct atm_blli {
-    unsigned char l2_proto;	/* layer 2 protocol */
-    union {
-	struct {
-	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
-				/* absent */
-	    unsigned char window; /* window size (k), 1-127 (0 to omit) */
-	} itu;			/* ITU-T encoding */
-	unsigned char user;	/* user-specified l2 information */
-    } l2;
-    unsigned char l3_proto;	/* layer 3 protocol */
-    union {
-	struct {
-	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
-				/* absent */
-	    unsigned char def_size; /* default packet size (log2), 4-12 (0 to */
-				    /* omit) */
-	    unsigned char window;/* packet window size, 1-127 (0 to omit) */
-	} itu;			/* ITU-T encoding */
-	unsigned char user;	/* user specified l3 information */
-	struct {		      /* if l3_proto = ATM_L3_H310 */
-	    unsigned char term_type;  /* terminal type */
-	    unsigned char fw_mpx_cap; /* forward multiplexing capability */
-				      /* only if term_type != ATM_TT_NONE */
-	    unsigned char bw_mpx_cap; /* backward multiplexing capability */
-				      /* only if term_type != ATM_TT_NONE */
-	} h310;
-	struct {		  /* if l3_proto = ATM_L3_TR9577 */
-	    unsigned char ipi;	  /* initial protocol id */
-	    unsigned char snap[5];/* IEEE 802.1 SNAP identifier */
-				  /* (only if ipi == NLPID_IEEE802_1_SNAP) */
-	} tr9577;
-    } l3;
-} __ATM_API_ALIGN;
-
-
-struct atm_bhli {
-    unsigned char hl_type;	/* high layer information type */
-    unsigned char hl_length;	/* length (only if hl_type == ATM_HL_USER || */
-				/* hl_type == ATM_HL_ISO) */
-    unsigned char hl_info[ATM_MAX_HLI];/* high layer information */
-};
-
-
-#define ATM_MAX_BLLI	3		/* maximum number of BLLI elements */
-
-
-struct atm_sap {
-	struct atm_bhli bhli;		/* local SAP, high-layer information */
-	struct atm_blli blli[ATM_MAX_BLLI] __ATM_API_ALIGN;
-					/* local SAP, low-layer info */
-};
-
-
-static __inline__ int blli_in_use(struct atm_blli blli)
-{
-	return blli.l2_proto || blli.l3_proto;
-}
-
-#endif
diff --git a/include/linux/atmsvc.h b/include/linux/atmsvc.h
deleted file mode 100644
index aa71583b8da7..000000000000
--- a/include/linux/atmsvc.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* atmsvc.h - ATM signaling kernel-demon interface definitions */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-#ifndef _LINUX_ATMSVC_H
-#define _LINUX_ATMSVC_H
-
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-
-
-#define ATMSIGD_CTRL _IO('a',ATMIOC_SPECIAL)
-				/* become ATM signaling demon control socket */
-
-enum atmsvc_msg_type { as_catch_null, as_bind, as_connect, as_accept, as_reject,
-		       as_listen, as_okay, as_error, as_indicate, as_close,
-		       as_itf_notify, as_modify, as_identify, as_terminate,
-		       as_addparty, as_dropparty };
-
-struct atmsvc_msg {
-	enum atmsvc_msg_type type;
-	atm_kptr_t vcc;
-	atm_kptr_t listen_vcc;		/* indicate */
-	int reply;			/* for okay and close:		   */
-					/*   < 0: error before active	   */
-					/*        (sigd has discarded ctx) */
-					/*   ==0: success		   */
-				        /*   > 0: error when active (still */
-					/*        need to close)	   */
-	struct sockaddr_atmpvc pvc;	/* indicate, okay (connect) */
-	struct sockaddr_atmsvc local;	/* local SVC address */
-	struct atm_qos qos;		/* QOS parameters */
-	struct atm_sap sap;		/* SAP */
-	unsigned int session;		/* for p2pm */
-	struct sockaddr_atmsvc svc;	/* SVC address */
-} __ATM_API_ALIGN;
-
-/*
- * Message contents: see ftp://icaftp.epfl.ch/pub/linux/atm/docs/isp-*.tar.gz
- */
-
-/*
- * Some policy stuff for atmsigd and for net/atm/svc.c. Both have to agree on
- * what PCR is used to request bandwidth from the device driver. net/atm/svc.c
- * tries to do better than that, but only if there's no routing decision (i.e.
- * if signaling only uses one ATM interface).
- */
-
-#define SELECT_TOP_PCR(tp) ((tp).pcr ? (tp).pcr : \
-  (tp).max_pcr && (tp).max_pcr != ATM_MAX_PCR ? (tp).max_pcr : \
-  (tp).min_pcr ? (tp).min_pcr : ATM_MAX_PCR)
-
-#endif
diff --git a/include/linux/audit.h b/include/linux/audit.h
index b889fa64b0e0..bce729afbcf9 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -20,389 +20,11 @@
  * Written by Rickard E. (Rik) Faith <faith@redhat.com>
  *
  */
-
 #ifndef _LINUX_AUDIT_H_
 #define _LINUX_AUDIT_H_
 
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#include <linux/ptrace.h>
-
-/* The netlink messages for the audit system is divided into blocks:
- * 1000 - 1099 are for commanding the audit system
- * 1100 - 1199 user space trusted application messages
- * 1200 - 1299 messages internal to the audit daemon
- * 1300 - 1399 audit event messages
- * 1400 - 1499 SE Linux use
- * 1500 - 1599 kernel LSPP events
- * 1600 - 1699 kernel crypto events
- * 1700 - 1799 kernel anomaly records
- * 1800 - 1899 kernel integrity events
- * 1900 - 1999 future kernel use
- * 2000 is for otherwise unclassified kernel audit messages (legacy)
- * 2001 - 2099 unused (kernel)
- * 2100 - 2199 user space anomaly records
- * 2200 - 2299 user space actions taken in response to anomalies
- * 2300 - 2399 user space generated LSPP events
- * 2400 - 2499 user space crypto events
- * 2500 - 2999 future user space (maybe integrity labels and related events)
- *
- * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
- * exclusively user space. 1300-2099 is kernel --> user space 
- * communication.
- */
-#define AUDIT_GET		1000	/* Get status */
-#define AUDIT_SET		1001	/* Set status (enable/disable/auditd) */
-#define AUDIT_LIST		1002	/* List syscall rules -- deprecated */
-#define AUDIT_ADD		1003	/* Add syscall rule -- deprecated */
-#define AUDIT_DEL		1004	/* Delete syscall rule -- deprecated */
-#define AUDIT_USER		1005	/* Message from userspace -- deprecated */
-#define AUDIT_LOGIN		1006	/* Define the login id and information */
-#define AUDIT_WATCH_INS		1007	/* Insert file/dir watch entry */
-#define AUDIT_WATCH_REM		1008	/* Remove file/dir watch entry */
-#define AUDIT_WATCH_LIST	1009	/* List all file/dir watches */
-#define AUDIT_SIGNAL_INFO	1010	/* Get info about sender of signal to auditd */
-#define AUDIT_ADD_RULE		1011	/* Add syscall filtering rule */
-#define AUDIT_DEL_RULE		1012	/* Delete syscall filtering rule */
-#define AUDIT_LIST_RULES	1013	/* List syscall filtering rules */
-#define AUDIT_TRIM		1014	/* Trim junk from watched tree */
-#define AUDIT_MAKE_EQUIV	1015	/* Append to watched tree */
-#define AUDIT_TTY_GET		1016	/* Get TTY auditing status */
-#define AUDIT_TTY_SET		1017	/* Set TTY auditing status */
-
-#define AUDIT_FIRST_USER_MSG	1100	/* Userspace messages mostly uninteresting to kernel */
-#define AUDIT_USER_AVC		1107	/* We filter this differently */
-#define AUDIT_USER_TTY		1124	/* Non-ICANON TTY input meaning */
-#define AUDIT_LAST_USER_MSG	1199
-#define AUDIT_FIRST_USER_MSG2	2100	/* More user space messages */
-#define AUDIT_LAST_USER_MSG2	2999
- 
-#define AUDIT_DAEMON_START      1200    /* Daemon startup record */
-#define AUDIT_DAEMON_END        1201    /* Daemon normal stop record */
-#define AUDIT_DAEMON_ABORT      1202    /* Daemon error stop record */
-#define AUDIT_DAEMON_CONFIG     1203    /* Daemon config change */
-
-#define AUDIT_SYSCALL		1300	/* Syscall event */
-/* #define AUDIT_FS_WATCH	1301	 * Deprecated */
-#define AUDIT_PATH		1302	/* Filename path information */
-#define AUDIT_IPC		1303	/* IPC record */
-#define AUDIT_SOCKETCALL	1304	/* sys_socketcall arguments */
-#define AUDIT_CONFIG_CHANGE	1305	/* Audit system configuration change */
-#define AUDIT_SOCKADDR		1306	/* sockaddr copied as syscall arg */
-#define AUDIT_CWD		1307	/* Current working directory */
-#define AUDIT_EXECVE		1309	/* execve arguments */
-#define AUDIT_IPC_SET_PERM	1311	/* IPC new permissions record type */
-#define AUDIT_MQ_OPEN		1312	/* POSIX MQ open record type */
-#define AUDIT_MQ_SENDRECV	1313	/* POSIX MQ send/receive record type */
-#define AUDIT_MQ_NOTIFY		1314	/* POSIX MQ notify record type */
-#define AUDIT_MQ_GETSETATTR	1315	/* POSIX MQ get/set attribute record type */
-#define AUDIT_KERNEL_OTHER	1316	/* For use by 3rd party modules */
-#define AUDIT_FD_PAIR		1317    /* audit record for pipe/socketpair */
-#define AUDIT_OBJ_PID		1318	/* ptrace target */
-#define AUDIT_TTY		1319	/* Input on an administrative TTY */
-#define AUDIT_EOE		1320	/* End of multi-record event */
-#define AUDIT_BPRM_FCAPS	1321	/* Information about fcaps increasing perms */
-#define AUDIT_CAPSET		1322	/* Record showing argument to sys_capset */
-#define AUDIT_MMAP		1323	/* Record showing descriptor and flags in mmap */
-#define AUDIT_NETFILTER_PKT	1324	/* Packets traversing netfilter chains */
-#define AUDIT_NETFILTER_CFG	1325	/* Netfilter chain modifications */
-
-#define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
-#define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
-#define AUDIT_AVC_PATH		1402	/* dentry, vfsmount pair from avc */
-#define AUDIT_MAC_POLICY_LOAD	1403	/* Policy file load */
-#define AUDIT_MAC_STATUS	1404	/* Changed enforcing,permissive,off */
-#define AUDIT_MAC_CONFIG_CHANGE	1405	/* Changes to booleans */
-#define AUDIT_MAC_UNLBL_ALLOW	1406	/* NetLabel: allow unlabeled traffic */
-#define AUDIT_MAC_CIPSOV4_ADD	1407	/* NetLabel: add CIPSOv4 DOI entry */
-#define AUDIT_MAC_CIPSOV4_DEL	1408	/* NetLabel: del CIPSOv4 DOI entry */
-#define AUDIT_MAC_MAP_ADD	1409	/* NetLabel: add LSM domain mapping */
-#define AUDIT_MAC_MAP_DEL	1410	/* NetLabel: del LSM domain mapping */
-#define AUDIT_MAC_IPSEC_ADDSA	1411	/* Not used */
-#define AUDIT_MAC_IPSEC_DELSA	1412	/* Not used  */
-#define AUDIT_MAC_IPSEC_ADDSPD	1413	/* Not used */
-#define AUDIT_MAC_IPSEC_DELSPD	1414	/* Not used */
-#define AUDIT_MAC_IPSEC_EVENT	1415	/* Audit an IPSec event */
-#define AUDIT_MAC_UNLBL_STCADD	1416	/* NetLabel: add a static label */
-#define AUDIT_MAC_UNLBL_STCDEL	1417	/* NetLabel: del a static label */
-
-#define AUDIT_FIRST_KERN_ANOM_MSG   1700
-#define AUDIT_LAST_KERN_ANOM_MSG    1799
-#define AUDIT_ANOM_PROMISCUOUS      1700 /* Device changed promiscuous mode */
-#define AUDIT_ANOM_ABEND            1701 /* Process ended abnormally */
-#define AUDIT_ANOM_LINK		    1702 /* Suspicious use of file links */
-#define AUDIT_INTEGRITY_DATA	    1800 /* Data integrity verification */
-#define AUDIT_INTEGRITY_METADATA    1801 /* Metadata integrity verification */
-#define AUDIT_INTEGRITY_STATUS	    1802 /* Integrity enable status */
-#define AUDIT_INTEGRITY_HASH	    1803 /* Integrity HASH type */
-#define AUDIT_INTEGRITY_PCR	    1804 /* PCR invalidation msgs */
-#define AUDIT_INTEGRITY_RULE	    1805 /* policy rule */
-
-#define AUDIT_KERNEL		2000	/* Asynchronous audit record. NOT A REQUEST. */
-
-/* Rule flags */
-#define AUDIT_FILTER_USER	0x00	/* Apply rule to user-generated messages */
-#define AUDIT_FILTER_TASK	0x01	/* Apply rule at task creation (not syscall) */
-#define AUDIT_FILTER_ENTRY	0x02	/* Apply rule at syscall entry */
-#define AUDIT_FILTER_WATCH	0x03	/* Apply rule to file system watches */
-#define AUDIT_FILTER_EXIT	0x04	/* Apply rule at syscall exit */
-#define AUDIT_FILTER_TYPE	0x05	/* Apply rule at audit_log_start */
-
-#define AUDIT_NR_FILTERS	6
-
-#define AUDIT_FILTER_PREPEND	0x10	/* Prepend to front of list */
-
-/* Rule actions */
-#define AUDIT_NEVER    0	/* Do not build context if rule matches */
-#define AUDIT_POSSIBLE 1	/* Build context if rule matches  */
-#define AUDIT_ALWAYS   2	/* Generate audit record if rule matches */
-
-/* Rule structure sizes -- if these change, different AUDIT_ADD and
- * AUDIT_LIST commands must be implemented. */
-#define AUDIT_MAX_FIELDS   64
-#define AUDIT_MAX_KEY_LEN  256
-#define AUDIT_BITMASK_SIZE 64
-#define AUDIT_WORD(nr) ((__u32)((nr)/32))
-#define AUDIT_BIT(nr)  (1 << ((nr) - AUDIT_WORD(nr)*32))
-
-#define AUDIT_SYSCALL_CLASSES 16
-#define AUDIT_CLASS_DIR_WRITE 0
-#define AUDIT_CLASS_DIR_WRITE_32 1
-#define AUDIT_CLASS_CHATTR 2
-#define AUDIT_CLASS_CHATTR_32 3
-#define AUDIT_CLASS_READ 4
-#define AUDIT_CLASS_READ_32 5
-#define AUDIT_CLASS_WRITE 6
-#define AUDIT_CLASS_WRITE_32 7
-#define AUDIT_CLASS_SIGNAL 8
-#define AUDIT_CLASS_SIGNAL_32 9
-
-/* This bitmask is used to validate user input.  It represents all bits that
- * are currently used in an audit field constant understood by the kernel.
- * If you are adding a new #define AUDIT_<whatever>, please ensure that
- * AUDIT_UNUSED_BITS is updated if need be. */
-#define AUDIT_UNUSED_BITS	0x07FFFC00
-
-/* AUDIT_FIELD_COMPARE rule list */
-#define AUDIT_COMPARE_UID_TO_OBJ_UID	1
-#define AUDIT_COMPARE_GID_TO_OBJ_GID	2
-#define AUDIT_COMPARE_EUID_TO_OBJ_UID	3
-#define AUDIT_COMPARE_EGID_TO_OBJ_GID	4
-#define AUDIT_COMPARE_AUID_TO_OBJ_UID	5
-#define AUDIT_COMPARE_SUID_TO_OBJ_UID	6
-#define AUDIT_COMPARE_SGID_TO_OBJ_GID	7
-#define AUDIT_COMPARE_FSUID_TO_OBJ_UID	8
-#define AUDIT_COMPARE_FSGID_TO_OBJ_GID	9
-
-#define AUDIT_COMPARE_UID_TO_AUID	10
-#define AUDIT_COMPARE_UID_TO_EUID	11
-#define AUDIT_COMPARE_UID_TO_FSUID	12
-#define AUDIT_COMPARE_UID_TO_SUID	13
-
-#define AUDIT_COMPARE_AUID_TO_FSUID	14
-#define AUDIT_COMPARE_AUID_TO_SUID	15
-#define AUDIT_COMPARE_AUID_TO_EUID	16
-
-#define AUDIT_COMPARE_EUID_TO_SUID	17
-#define AUDIT_COMPARE_EUID_TO_FSUID	18
-
-#define AUDIT_COMPARE_SUID_TO_FSUID	19
-
-#define AUDIT_COMPARE_GID_TO_EGID	20
-#define AUDIT_COMPARE_GID_TO_FSGID	21
-#define AUDIT_COMPARE_GID_TO_SGID	22
-
-#define AUDIT_COMPARE_EGID_TO_FSGID	23
-#define AUDIT_COMPARE_EGID_TO_SGID	24
-#define AUDIT_COMPARE_SGID_TO_FSGID	25
-
-#define AUDIT_MAX_FIELD_COMPARE		AUDIT_COMPARE_SGID_TO_FSGID
-
-/* Rule fields */
-				/* These are useful when checking the
-				 * task structure at task creation time
-				 * (AUDIT_PER_TASK).  */
-#define AUDIT_PID	0
-#define AUDIT_UID	1
-#define AUDIT_EUID	2
-#define AUDIT_SUID	3
-#define AUDIT_FSUID	4
-#define AUDIT_GID	5
-#define AUDIT_EGID	6
-#define AUDIT_SGID	7
-#define AUDIT_FSGID	8
-#define AUDIT_LOGINUID	9
-#define AUDIT_PERS	10
-#define AUDIT_ARCH	11
-#define AUDIT_MSGTYPE	12
-#define AUDIT_SUBJ_USER	13	/* security label user */
-#define AUDIT_SUBJ_ROLE	14	/* security label role */
-#define AUDIT_SUBJ_TYPE	15	/* security label type */
-#define AUDIT_SUBJ_SEN	16	/* security label sensitivity label */
-#define AUDIT_SUBJ_CLR	17	/* security label clearance label */
-#define AUDIT_PPID	18
-#define AUDIT_OBJ_USER	19
-#define AUDIT_OBJ_ROLE	20
-#define AUDIT_OBJ_TYPE	21
-#define AUDIT_OBJ_LEV_LOW	22
-#define AUDIT_OBJ_LEV_HIGH	23
-
-				/* These are ONLY useful when checking
-				 * at syscall exit time (AUDIT_AT_EXIT). */
-#define AUDIT_DEVMAJOR	100
-#define AUDIT_DEVMINOR	101
-#define AUDIT_INODE	102
-#define AUDIT_EXIT	103
-#define AUDIT_SUCCESS   104	/* exit >= 0; value ignored */
-#define AUDIT_WATCH	105
-#define AUDIT_PERM	106
-#define AUDIT_DIR	107
-#define AUDIT_FILETYPE	108
-#define AUDIT_OBJ_UID	109
-#define AUDIT_OBJ_GID	110
-#define AUDIT_FIELD_COMPARE	111
-
-#define AUDIT_ARG0      200
-#define AUDIT_ARG1      (AUDIT_ARG0+1)
-#define AUDIT_ARG2      (AUDIT_ARG0+2)
-#define AUDIT_ARG3      (AUDIT_ARG0+3)
-
-#define AUDIT_FILTERKEY	210
-
-#define AUDIT_NEGATE			0x80000000
-
-/* These are the supported operators.
- *	4  2  1  8
- *	=  >  <  ?
- *	----------
- *	0  0  0	 0	00	nonsense
- *	0  0  0	 1	08	&  bit mask
- *	0  0  1	 0	10	<
- *	0  1  0	 0	20	>
- *	0  1  1	 0	30	!=
- *	1  0  0	 0	40	=
- *	1  0  0	 1	48	&=  bit test
- *	1  0  1	 0	50	<=
- *	1  1  0	 0	60	>=
- *	1  1  1	 1	78	all operators
- */
-#define AUDIT_BIT_MASK			0x08000000
-#define AUDIT_LESS_THAN			0x10000000
-#define AUDIT_GREATER_THAN		0x20000000
-#define AUDIT_NOT_EQUAL			0x30000000
-#define AUDIT_EQUAL			0x40000000
-#define AUDIT_BIT_TEST			(AUDIT_BIT_MASK|AUDIT_EQUAL)
-#define AUDIT_LESS_THAN_OR_EQUAL	(AUDIT_LESS_THAN|AUDIT_EQUAL)
-#define AUDIT_GREATER_THAN_OR_EQUAL	(AUDIT_GREATER_THAN|AUDIT_EQUAL)
-#define AUDIT_OPERATORS			(AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
-
-enum {
-	Audit_equal,
-	Audit_not_equal,
-	Audit_bitmask,
-	Audit_bittest,
-	Audit_lt,
-	Audit_gt,
-	Audit_le,
-	Audit_ge,
-	Audit_bad
-};
-
-/* Status symbols */
-				/* Mask values */
-#define AUDIT_STATUS_ENABLED		0x0001
-#define AUDIT_STATUS_FAILURE		0x0002
-#define AUDIT_STATUS_PID		0x0004
-#define AUDIT_STATUS_RATE_LIMIT		0x0008
-#define AUDIT_STATUS_BACKLOG_LIMIT	0x0010
-				/* Failure-to-log actions */
-#define AUDIT_FAIL_SILENT	0
-#define AUDIT_FAIL_PRINTK	1
-#define AUDIT_FAIL_PANIC	2
-
-/* distinguish syscall tables */
-#define __AUDIT_ARCH_64BIT 0x80000000
-#define __AUDIT_ARCH_LE	   0x40000000
-#define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARMEB	(EM_ARM)
-#define AUDIT_ARCH_CRIS		(EM_CRIS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_FRV		(EM_FRV)
-#define AUDIT_ARCH_H8300	(EM_H8_300)
-#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_IA64		(EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_M32R		(EM_M32R)
-#define AUDIT_ARCH_M68K		(EM_68K)
-#define AUDIT_ARCH_MIPS		(EM_MIPS)
-#define AUDIT_ARCH_MIPSEL	(EM_MIPS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_MIPS64	(EM_MIPS|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_MIPSEL64	(EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_OPENRISC	(EM_OPENRISC)
-#define AUDIT_ARCH_PARISC	(EM_PARISC)
-#define AUDIT_ARCH_PARISC64	(EM_PARISC|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_PPC		(EM_PPC)
-#define AUDIT_ARCH_PPC64	(EM_PPC64|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_S390		(EM_S390)
-#define AUDIT_ARCH_S390X	(EM_S390|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SH		(EM_SH)
-#define AUDIT_ARCH_SHEL		(EM_SH|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SH64		(EM_SH|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SHEL64	(EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SPARC	(EM_SPARC)
-#define AUDIT_ARCH_SPARC64	(EM_SPARCV9|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-
-#define AUDIT_PERM_EXEC		1
-#define AUDIT_PERM_WRITE	2
-#define AUDIT_PERM_READ		4
-#define AUDIT_PERM_ATTR		8
-
-struct audit_status {
-	__u32		mask;		/* Bit mask for valid entries */
-	__u32		enabled;	/* 1 = enabled, 0 = disabled */
-	__u32		failure;	/* Failure-to-log action */
-	__u32		pid;		/* pid of auditd process */
-	__u32		rate_limit;	/* messages rate limit (per second) */
-	__u32		backlog_limit;	/* waiting messages limit */
-	__u32		lost;		/* messages lost */
-	__u32		backlog;	/* messages waiting in queue */
-};
-
-struct audit_tty_status {
-	__u32		enabled; /* 1 = enabled, 0 = disabled */
-};
-
-/* audit_rule_data supports filter rules with both integer and string
- * fields.  It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
- * AUDIT_LIST_RULES requests.
- */
-struct audit_rule_data {
-	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
-	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
-	__u32		field_count;
-	__u32		mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
-	__u32		fields[AUDIT_MAX_FIELDS];
-	__u32		values[AUDIT_MAX_FIELDS];
-	__u32		fieldflags[AUDIT_MAX_FIELDS];
-	__u32		buflen;	/* total length of string fields */
-	char		buf[0];	/* string fields buffer */
-};
-
-/* audit_rule is supported to maintain backward compatibility with
- * userspace.  It supports integer fields only and corresponds to
- * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
- */
-struct audit_rule {		/* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
-	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
-	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
-	__u32		field_count;
-	__u32		mask[AUDIT_BITMASK_SIZE];
-	__u32		fields[AUDIT_MAX_FIELDS];
-	__u32		values[AUDIT_MAX_FIELDS];
-};
-
-#ifdef __KERNEL__
 #include <linux/sched.h>
+#include <uapi/linux/audit.h>
 
 struct audit_sig_info {
 	uid_t		uid;
@@ -860,4 +482,3 @@ static inline void audit_log_string(struct audit_buffer *ab, const char *buf)
 }
 
 #endif
-#endif
diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h
index da64e15004b6..fcd704d354c4 100644
--- a/include/linux/auto_fs.h
+++ b/include/linux/auto_fs.h
@@ -10,77 +10,11 @@
  *
  * ----------------------------------------------------------------------- */
 
-
 #ifndef _LINUX_AUTO_FS_H
 #define _LINUX_AUTO_FS_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/fs.h>
 #include <linux/limits.h>
 #include <linux/ioctl.h>
-#else
-#include <sys/ioctl.h>
-#endif /* __KERNEL__ */
-
-/* This file describes autofs v3 */
-#define AUTOFS_PROTO_VERSION	3
-
-/* Range of protocol versions defined */
-#define AUTOFS_MAX_PROTO_VERSION	AUTOFS_PROTO_VERSION
-#define AUTOFS_MIN_PROTO_VERSION	AUTOFS_PROTO_VERSION
-
-/*
- * Architectures where both 32- and 64-bit binaries can be executed
- * on 64-bit kernels need this.  This keeps the structure format
- * uniform, and makes sure the wait_queue_token isn't too big to be
- * passed back down to the kernel.
- *
- * This assumes that on these architectures:
- * mode     32 bit    64 bit
- * -------------------------
- * int      32 bit    32 bit
- * long     32 bit    64 bit
- *
- * If so, 32-bit user-space code should be backwards compatible.
- */
-
-#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
- || defined(__powerpc__) || defined(__s390__)
-typedef unsigned int autofs_wqt_t;
-#else
-typedef unsigned long autofs_wqt_t;
-#endif
-
-/* Packet types */
-#define autofs_ptype_missing	0	/* Missing entry (mount request) */
-#define autofs_ptype_expire	1	/* Expire entry (umount request) */
-
-struct autofs_packet_hdr {
-	int proto_version;		/* Protocol version */
-	int type;			/* Type of packet */
-};
-
-struct autofs_packet_missing {
-	struct autofs_packet_hdr hdr;
-        autofs_wqt_t wait_queue_token;
-	int len;
-	char name[NAME_MAX+1];
-};	
-
-/* v3 expire (via ioctl) */
-struct autofs_packet_expire {
-	struct autofs_packet_hdr hdr;
-	int len;
-	char name[NAME_MAX+1];
-};
-
-#define AUTOFS_IOC_READY      _IO(0x93,0x60)
-#define AUTOFS_IOC_FAIL       _IO(0x93,0x61)
-#define AUTOFS_IOC_CATATONIC  _IO(0x93,0x62)
-#define AUTOFS_IOC_PROTOVER   _IOR(0x93,0x63,int)
-#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
-#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
-#define AUTOFS_IOC_EXPIRE     _IOR(0x93,0x65,struct autofs_packet_expire)
-
+#include <uapi/linux/auto_fs.h>
 #endif /* _LINUX_AUTO_FS_H */
diff --git a/include/linux/auto_fs4.h b/include/linux/auto_fs4.h
deleted file mode 100644
index e02982fa2953..000000000000
--- a/include/linux/auto_fs4.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/* -*- c -*-
- * linux/include/linux/auto_fs4.h
- *
- * Copyright 1999-2000 Jeremy Fitzhardinge <jeremy@goop.org>
- *
- * This file is part of the Linux kernel and is made available under
- * the terms of the GNU General Public License, version 2, or at your
- * option, any later version, incorporated herein by reference.
- */
-
-#ifndef _LINUX_AUTO_FS4_H
-#define _LINUX_AUTO_FS4_H
-
-/* Include common v3 definitions */
-#include <linux/types.h>
-#include <linux/auto_fs.h>
-
-/* autofs v4 definitions */
-#undef AUTOFS_PROTO_VERSION
-#undef AUTOFS_MIN_PROTO_VERSION
-#undef AUTOFS_MAX_PROTO_VERSION
-
-#define AUTOFS_PROTO_VERSION		5
-#define AUTOFS_MIN_PROTO_VERSION	3
-#define AUTOFS_MAX_PROTO_VERSION	5
-
-#define AUTOFS_PROTO_SUBVERSION		2
-
-/* Mask for expire behaviour */
-#define AUTOFS_EXP_IMMEDIATE		1
-#define AUTOFS_EXP_LEAVES		2
-
-#define AUTOFS_TYPE_ANY			0U
-#define AUTOFS_TYPE_INDIRECT		1U
-#define AUTOFS_TYPE_DIRECT		2U
-#define AUTOFS_TYPE_OFFSET		4U
-
-static inline void set_autofs_type_indirect(unsigned int *type)
-{
-	*type = AUTOFS_TYPE_INDIRECT;
-	return;
-}
-
-static inline unsigned int autofs_type_indirect(unsigned int type)
-{
-	return (type == AUTOFS_TYPE_INDIRECT);
-}
-
-static inline void set_autofs_type_direct(unsigned int *type)
-{
-	*type = AUTOFS_TYPE_DIRECT;
-	return;
-}
-
-static inline unsigned int autofs_type_direct(unsigned int type)
-{
-	return (type == AUTOFS_TYPE_DIRECT);
-}
-
-static inline void set_autofs_type_offset(unsigned int *type)
-{
-	*type = AUTOFS_TYPE_OFFSET;
-	return;
-}
-
-static inline unsigned int autofs_type_offset(unsigned int type)
-{
-	return (type == AUTOFS_TYPE_OFFSET);
-}
-
-static inline unsigned int autofs_type_trigger(unsigned int type)
-{
-	return (type == AUTOFS_TYPE_DIRECT || type == AUTOFS_TYPE_OFFSET);
-}
-
-/*
- * This isn't really a type as we use it to say "no type set" to
- * indicate we want to search for "any" mount in the
- * autofs_dev_ioctl_ismountpoint() device ioctl function.
- */
-static inline void set_autofs_type_any(unsigned int *type)
-{
-	*type = AUTOFS_TYPE_ANY;
-	return;
-}
-
-static inline unsigned int autofs_type_any(unsigned int type)
-{
-	return (type == AUTOFS_TYPE_ANY);
-}
-
-/* Daemon notification packet types */
-enum autofs_notify {
-	NFY_NONE,
-	NFY_MOUNT,
-	NFY_EXPIRE
-};
-
-/* Kernel protocol version 4 packet types */
-
-/* Expire entry (umount request) */
-#define autofs_ptype_expire_multi	2
-
-/* Kernel protocol version 5 packet types */
-
-/* Indirect mount missing and expire requests. */
-#define autofs_ptype_missing_indirect	3
-#define autofs_ptype_expire_indirect	4
-
-/* Direct mount missing and expire requests */
-#define autofs_ptype_missing_direct	5
-#define autofs_ptype_expire_direct	6
-
-/* v4 multi expire (via pipe) */
-struct autofs_packet_expire_multi {
-	struct autofs_packet_hdr hdr;
-        autofs_wqt_t wait_queue_token;
-	int len;
-	char name[NAME_MAX+1];
-};
-
-union autofs_packet_union {
-	struct autofs_packet_hdr hdr;
-	struct autofs_packet_missing missing;
-	struct autofs_packet_expire expire;
-	struct autofs_packet_expire_multi expire_multi;
-};
-
-/* autofs v5 common packet struct */
-struct autofs_v5_packet {
-	struct autofs_packet_hdr hdr;
-	autofs_wqt_t wait_queue_token;
-	__u32 dev;
-	__u64 ino;
-	__u32 uid;
-	__u32 gid;
-	__u32 pid;
-	__u32 tgid;
-	__u32 len;
-	char name[NAME_MAX+1];
-};
-
-typedef struct autofs_v5_packet autofs_packet_missing_indirect_t;
-typedef struct autofs_v5_packet autofs_packet_expire_indirect_t;
-typedef struct autofs_v5_packet autofs_packet_missing_direct_t;
-typedef struct autofs_v5_packet autofs_packet_expire_direct_t;
-
-union autofs_v5_packet_union {
-	struct autofs_packet_hdr hdr;
-	struct autofs_v5_packet v5_packet;
-	autofs_packet_missing_indirect_t missing_indirect;
-	autofs_packet_expire_indirect_t expire_indirect;
-	autofs_packet_missing_direct_t missing_direct;
-	autofs_packet_expire_direct_t expire_direct;
-};
-
-#define AUTOFS_IOC_EXPIRE_MULTI		_IOW(0x93,0x66,int)
-#define AUTOFS_IOC_EXPIRE_INDIRECT	AUTOFS_IOC_EXPIRE_MULTI
-#define AUTOFS_IOC_EXPIRE_DIRECT	AUTOFS_IOC_EXPIRE_MULTI
-#define AUTOFS_IOC_PROTOSUBVER		_IOR(0x93,0x67,int)
-#define AUTOFS_IOC_ASKUMOUNT		_IOR(0x93,0x70,int)
-
-
-#endif /* _LINUX_AUTO_FS4_H */
diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h
index f3b5d4e3a2ac..669fef5c745a 100644
--- a/include/linux/auxvec.h
+++ b/include/linux/auxvec.h
@@ -1,39 +1,8 @@
 #ifndef _LINUX_AUXVEC_H
 #define _LINUX_AUXVEC_H
 
-#include <asm/auxvec.h>
+#include <uapi/linux/auxvec.h>
 
-/* Symbolic values for the entries in the auxiliary table
-   put on the initial stack */
-#define AT_NULL   0	/* end of vector */
-#define AT_IGNORE 1	/* entry should be ignored */
-#define AT_EXECFD 2	/* file descriptor of program */
-#define AT_PHDR   3	/* program headers for program */
-#define AT_PHENT  4	/* size of program header entry */
-#define AT_PHNUM  5	/* number of program headers */
-#define AT_PAGESZ 6	/* system page size */
-#define AT_BASE   7	/* base address of interpreter */
-#define AT_FLAGS  8	/* flags */
-#define AT_ENTRY  9	/* entry point of program */
-#define AT_NOTELF 10	/* program is not ELF */
-#define AT_UID    11	/* real uid */
-#define AT_EUID   12	/* effective uid */
-#define AT_GID    13	/* real gid */
-#define AT_EGID   14	/* effective gid */
-#define AT_PLATFORM 15  /* string identifying CPU for optimizations */
-#define AT_HWCAP  16    /* arch dependent hints at CPU capabilities */
-#define AT_CLKTCK 17	/* frequency at which times() increments */
-/* AT_* values 18 through 22 are reserved */
-#define AT_SECURE 23   /* secure mode boolean */
-#define AT_BASE_PLATFORM 24	/* string identifying real platform, may
-				 * differ from AT_PLATFORM. */
-#define AT_RANDOM 25	/* address of 16 random bytes */
-
-#define AT_EXECFN  31	/* filename of program */
-
-#ifdef __KERNEL__
 #define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */
   /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
-#endif
-
 #endif /* _LINUX_AUXVEC_H */
diff --git a/include/linux/ax25.h b/include/linux/ax25.h
deleted file mode 100644
index 74c89a41732d..000000000000
--- a/include/linux/ax25.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * These are the public elements of the Linux kernel AX.25 code. A similar
- * file netrom.h exists for the NET/ROM protocol.
- */
-
-#ifndef	AX25_KERNEL_H
-#define	AX25_KERNEL_H
-
-#include <linux/socket.h>
-
-#define AX25_MTU	256
-#define AX25_MAX_DIGIS  8
-
-#define AX25_WINDOW	1
-#define AX25_T1		2
-#define AX25_N2		3
-#define AX25_T3		4
-#define AX25_T2		5
-#define	AX25_BACKOFF	6
-#define	AX25_EXTSEQ	7
-#define	AX25_PIDINCL	8
-#define AX25_IDLE	9
-#define AX25_PACLEN	10
-#define AX25_IAMDIGI	12
-
-#define AX25_KILL	99
-
-#define SIOCAX25GETUID		(SIOCPROTOPRIVATE+0)
-#define SIOCAX25ADDUID		(SIOCPROTOPRIVATE+1)
-#define SIOCAX25DELUID		(SIOCPROTOPRIVATE+2)
-#define SIOCAX25NOUID		(SIOCPROTOPRIVATE+3)
-#define SIOCAX25OPTRT		(SIOCPROTOPRIVATE+7)
-#define SIOCAX25CTLCON		(SIOCPROTOPRIVATE+8)
-#define SIOCAX25GETINFOOLD	(SIOCPROTOPRIVATE+9)
-#define SIOCAX25ADDFWD		(SIOCPROTOPRIVATE+10)
-#define SIOCAX25DELFWD		(SIOCPROTOPRIVATE+11)
-#define SIOCAX25DEVCTL          (SIOCPROTOPRIVATE+12)
-#define SIOCAX25GETINFO         (SIOCPROTOPRIVATE+13)
-
-#define AX25_SET_RT_IPMODE	2
-
-#define AX25_NOUID_DEFAULT	0
-#define AX25_NOUID_BLOCK	1
-
-typedef struct {
-	char		ax25_call[7];	/* 6 call + SSID (shifted ascii!) */
-} ax25_address;
-
-struct sockaddr_ax25 {
-	__kernel_sa_family_t sax25_family;
-	ax25_address	sax25_call;
-	int		sax25_ndigis;
-	/* Digipeater ax25_address sets follow */
-};
-
-#define sax25_uid	sax25_ndigis
-
-struct full_sockaddr_ax25 {
-	struct sockaddr_ax25 fsa_ax25;
-	ax25_address	fsa_digipeater[AX25_MAX_DIGIS];
-};
-
-struct ax25_routes_struct {
-	ax25_address	port_addr;
-	ax25_address	dest_addr;
-	unsigned char	digi_count;
-	ax25_address	digi_addr[AX25_MAX_DIGIS];
-};
-
-struct ax25_route_opt_struct {
-	ax25_address	port_addr;
-	ax25_address	dest_addr;
-	int		cmd;
-	int		arg;
-};
-
-struct ax25_ctl_struct {
-        ax25_address            port_addr;
-        ax25_address            source_addr;
-        ax25_address            dest_addr;
-        unsigned int            cmd;
-        unsigned long           arg;
-        unsigned char           digi_count;
-        ax25_address            digi_addr[AX25_MAX_DIGIS];
-};
-
-/* this will go away. Please do not export to user land */
-struct ax25_info_struct_deprecated {
-	unsigned int	n2, n2count;
-	unsigned int	t1, t1timer;
-	unsigned int	t2, t2timer;
-	unsigned int	t3, t3timer;
-	unsigned int	idle, idletimer;
-	unsigned int	state;
-	unsigned int	rcv_q, snd_q;
-};
-
-struct ax25_info_struct {
-	unsigned int	n2, n2count;
-	unsigned int	t1, t1timer;
-	unsigned int	t2, t2timer;
-	unsigned int	t3, t3timer;
-	unsigned int	idle, idletimer;
-	unsigned int	state;
-	unsigned int	rcv_q, snd_q;
-	unsigned int	vs, vr, va, vs_max;
-	unsigned int	paclen;
-	unsigned int	window;
-};
-
-struct ax25_fwd_struct {
-	ax25_address	port_from;
-	ax25_address	port_to;
-};
-
-#endif
diff --git a/include/linux/b1lli.h b/include/linux/b1lli.h
deleted file mode 100644
index 713f712685d3..000000000000
--- a/include/linux/b1lli.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* $Id: b1lli.h,v 1.8.8.3 2001/09/23 22:25:05 kai Exp $
- *
- * ISDN lowlevel-module for AVM B1-card.
- *
- * Copyright 1996 by Carsten Paeth (calle@calle.in-berlin.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef _B1LLI_H_
-#define _B1LLI_H_
-/*
- * struct for loading t4 file 
- */
-typedef struct avmb1_t4file {
-	int len;
-	unsigned char *data;
-} avmb1_t4file;
-
-typedef struct avmb1_loaddef {
-	int contr;
-	avmb1_t4file t4file;
-} avmb1_loaddef;
-
-typedef struct avmb1_loadandconfigdef {
-	int contr;
-	avmb1_t4file t4file;
-        avmb1_t4file t4config; 
-} avmb1_loadandconfigdef;
-
-typedef struct avmb1_resetdef {
-	int contr;
-} avmb1_resetdef;
-
-typedef struct avmb1_getdef {
-	int contr;
-	int cardtype;
-	int cardstate;
-} avmb1_getdef;
-
-/*
- * struct for adding new cards 
- */
-typedef struct avmb1_carddef {
-	int port;
-	int irq;
-} avmb1_carddef;
-
-#define AVM_CARDTYPE_B1		0
-#define AVM_CARDTYPE_T1		1
-#define AVM_CARDTYPE_M1		2
-#define AVM_CARDTYPE_M2		3
-
-typedef struct avmb1_extcarddef {
-	int port;
-	int irq;
-        int cardtype;
-        int cardnr;  /* for HEMA/T1 */
-} avmb1_extcarddef;
-
-#define	AVMB1_LOAD		0	/* load image to card */
-#define AVMB1_ADDCARD		1	/* add a new card - OBSOLETE */
-#define AVMB1_RESETCARD		2	/* reset a card */
-#define	AVMB1_LOAD_AND_CONFIG	3	/* load image and config to card */
-#define	AVMB1_ADDCARD_WITH_TYPE	4	/* add a new card, with cardtype */
-#define AVMB1_GET_CARDINFO	5	/* get cardtype */
-#define AVMB1_REMOVECARD	6	/* remove a card - OBSOLETE */
-
-#define	AVMB1_REGISTERCARD_IS_OBSOLETE
-
-#endif				/* _B1LLI_H_ */
diff --git a/include/linux/baycom.h b/include/linux/baycom.h
deleted file mode 100644
index 81249e029dad..000000000000
--- a/include/linux/baycom.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * The Linux BAYCOM driver for the Baycom serial 1200 baud modem
- * and the parallel 9600 baud modem
- * (C) 1997-1998 by Thomas Sailer, HB9JNX/AE4WA
- */
-
-#ifndef _BAYCOM_H
-#define _BAYCOM_H
-
-/* -------------------------------------------------------------------- */
-/*
- * structs for the IOCTL commands
- */
-
-struct baycom_debug_data {
-	unsigned long debug1;
-	unsigned long debug2;
-	long debug3;
-};
-
-struct baycom_ioctl {
-	int cmd;
-	union {
-		struct baycom_debug_data dbg;
-	} data;
-};
-
-/* -------------------------------------------------------------------- */
-
-/*
- * ioctl values change for baycom
- */
-#define BAYCOMCTL_GETDEBUG       0x92
-
-/* -------------------------------------------------------------------- */
-
-#endif /* _BAYCOM_H */
-
-/* --------------------------------------------------------------------- */
diff --git a/include/linux/bfs_fs.h b/include/linux/bfs_fs.h
deleted file mode 100644
index 1c0b355aa515..000000000000
--- a/include/linux/bfs_fs.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *	include/linux/bfs_fs.h - BFS data structures on disk.
- *	Copyright (C) 1999 Tigran Aivazian <tigran@veritas.com>
- */
-
-#ifndef _LINUX_BFS_FS_H
-#define _LINUX_BFS_FS_H
-
-#include <linux/types.h>
-
-#define BFS_BSIZE_BITS		9
-#define BFS_BSIZE		(1<<BFS_BSIZE_BITS)
-
-#define BFS_MAGIC		0x1BADFACE
-#define BFS_ROOT_INO		2
-#define BFS_INODES_PER_BLOCK	8
-
-/* SVR4 vnode type values (bfs_inode->i_vtype) */
-#define BFS_VDIR 2L
-#define BFS_VREG 1L
-
-/* BFS inode layout on disk */
-struct bfs_inode {
-	__le16 i_ino;
-	__u16 i_unused;
-	__le32 i_sblock;
-	__le32 i_eblock;
-	__le32 i_eoffset;
-	__le32 i_vtype;
-	__le32 i_mode;
-	__le32 i_uid;
-	__le32 i_gid;
-	__le32 i_nlink;
-	__le32 i_atime;
-	__le32 i_mtime;
-	__le32 i_ctime;
-	__u32 i_padding[4];
-};
-
-#define BFS_NAMELEN		14	
-#define BFS_DIRENT_SIZE		16
-#define BFS_DIRS_PER_BLOCK	32
-
-struct bfs_dirent {
-	__le16 ino;
-	char name[BFS_NAMELEN];
-};
-
-/* BFS superblock layout on disk */
-struct bfs_super_block {
-	__le32 s_magic;
-	__le32 s_start;
-	__le32 s_end;
-	__le32 s_from;
-	__le32 s_to;
-	__s32 s_bfrom;
-	__s32 s_bto;
-	char  s_fsname[6];
-	char  s_volume[6];
-	__u32 s_padding[118];
-};
-
-
-#define BFS_OFF2INO(offset) \
-        ((((offset) - BFS_BSIZE) / sizeof(struct bfs_inode)) + BFS_ROOT_INO)
-
-#define BFS_INO2OFF(ino) \
-	((__u32)(((ino) - BFS_ROOT_INO) * sizeof(struct bfs_inode)) + BFS_BSIZE)
-#define BFS_NZFILESIZE(ip) \
-        ((le32_to_cpu((ip)->i_eoffset) + 1) -  le32_to_cpu((ip)->i_sblock) * BFS_BSIZE)
-
-#define BFS_FILESIZE(ip) \
-        ((ip)->i_sblock == 0 ? 0 : BFS_NZFILESIZE(ip))
-
-#define BFS_FILEBLOCKS(ip) \
-        ((ip)->i_sblock == 0 ? 0 : (le32_to_cpu((ip)->i_eblock) + 1) -  le32_to_cpu((ip)->i_sblock))
-#define BFS_UNCLEAN(bfs_sb, sb)	\
-	((le32_to_cpu(bfs_sb->s_from) != -1) && (le32_to_cpu(bfs_sb->s_to) != -1) && !(sb->s_flags & MS_RDONLY))
-
-
-#endif	/* _LINUX_BFS_FS_H */
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index 26531f32bbb2..cfcc6bfcaec0 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -1,26 +1,10 @@
 #ifndef _LINUX_BINFMTS_H
 #define _LINUX_BINFMTS_H
 
-#include <linux/capability.h>
-
-struct pt_regs;
-
-/*
- * These are the maximum length and maximum number of strings passed to the
- * execve() system call.  MAX_ARG_STRLEN is essentially random but serves to
- * prevent the kernel from being unduly impacted by misaddressed pointers.
- * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
- */
-#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
-#define MAX_ARG_STRINGS 0x7FFFFFFF
-
-/* sizeof(linux_binprm->buf) */
-#define BINPRM_BUF_SIZE 128
-
-#ifdef __KERNEL__
 #include <linux/sched.h>
 #include <linux/unistd.h>
 #include <asm/exec.h>
+#include <uapi/linux/binfmts.h>
 
 #define CORENAME_MAX_SIZE 128
 
@@ -141,5 +125,4 @@ extern void free_bprm(struct linux_binprm *);
 extern void ret_from_kernel_execve(struct pt_regs *normal) __noreturn;
 #endif
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_BINFMTS_H */
diff --git a/include/linux/blkpg.h b/include/linux/blkpg.h
deleted file mode 100644
index a8519446c111..000000000000
--- a/include/linux/blkpg.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _LINUX_BLKPG_H
-#define _LINUX_BLKPG_H
-
-/*
- * Partition table and disk geometry handling
- *
- * A single ioctl with lots of subfunctions:
- *
- * Device number stuff:
- *    get_whole_disk()		(given the device number of a partition,
- *                               find the device number of the encompassing disk)
- *    get_all_partitions()	(given the device number of a disk, return the
- *				 device numbers of all its known partitions)
- *
- * Partition stuff:
- *    add_partition()
- *    delete_partition()
- *    test_partition_in_use()	(also for test_disk_in_use)
- *
- * Geometry stuff:
- *    get_geometry()
- *    set_geometry()
- *    get_bios_drivedata()
- *
- * For today, only the partition stuff - aeb, 990515
- */
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-
-#define BLKPG      _IO(0x12,105)
-
-/* The argument structure */
-struct blkpg_ioctl_arg {
-        int op;
-        int flags;
-        int datalen;
-        void __user *data;
-};
-
-/* The subfunctions (for the op field) */
-#define BLKPG_ADD_PARTITION	1
-#define BLKPG_DEL_PARTITION	2
-#define BLKPG_RESIZE_PARTITION	3
-
-/* Sizes of name fields. Unused at present. */
-#define BLKPG_DEVNAMELTH	64
-#define BLKPG_VOLNAMELTH	64
-
-/* The data structure for ADD_PARTITION and DEL_PARTITION */
-struct blkpg_partition {
-	long long start;		/* starting offset in bytes */
-	long long length;		/* length in bytes */
-	int pno;			/* partition number */
-	char devname[BLKPG_DEVNAMELTH];	/* partition name, like sda5 or c0d1p2,
-					   to be used in kernel messages */
-	char volname[BLKPG_VOLNAMELTH];	/* volume label */
-};
-
-#endif /* _LINUX_BLKPG_H */
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 4d1a0748eaf8..7c2e030e72f1 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -1,150 +1,11 @@
 #ifndef BLKTRACE_H
 #define BLKTRACE_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/blkdev.h>
 #include <linux/relay.h>
 #include <linux/compat.h>
-#endif
-
-/*
- * Trace categories
- */
-enum blktrace_cat {
-	BLK_TC_READ	= 1 << 0,	/* reads */
-	BLK_TC_WRITE	= 1 << 1,	/* writes */
-	BLK_TC_FLUSH	= 1 << 2,	/* flush */
-	BLK_TC_SYNC	= 1 << 3,	/* sync IO */
-	BLK_TC_SYNCIO	= BLK_TC_SYNC,
-	BLK_TC_QUEUE	= 1 << 4,	/* queueing/merging */
-	BLK_TC_REQUEUE	= 1 << 5,	/* requeueing */
-	BLK_TC_ISSUE	= 1 << 6,	/* issue */
-	BLK_TC_COMPLETE	= 1 << 7,	/* completions */
-	BLK_TC_FS	= 1 << 8,	/* fs requests */
-	BLK_TC_PC	= 1 << 9,	/* pc requests */
-	BLK_TC_NOTIFY	= 1 << 10,	/* special message */
-	BLK_TC_AHEAD	= 1 << 11,	/* readahead */
-	BLK_TC_META	= 1 << 12,	/* metadata */
-	BLK_TC_DISCARD	= 1 << 13,	/* discard requests */
-	BLK_TC_DRV_DATA	= 1 << 14,	/* binary per-driver data */
-	BLK_TC_FUA	= 1 << 15,	/* fua requests */
-
-	BLK_TC_END	= 1 << 15,	/* we've run out of bits! */
-};
-
-#define BLK_TC_SHIFT		(16)
-#define BLK_TC_ACT(act)		((act) << BLK_TC_SHIFT)
-
-/*
- * Basic trace actions
- */
-enum blktrace_act {
-	__BLK_TA_QUEUE = 1,		/* queued */
-	__BLK_TA_BACKMERGE,		/* back merged to existing rq */
-	__BLK_TA_FRONTMERGE,		/* front merge to existing rq */
-	__BLK_TA_GETRQ,			/* allocated new request */
-	__BLK_TA_SLEEPRQ,		/* sleeping on rq allocation */
-	__BLK_TA_REQUEUE,		/* request requeued */
-	__BLK_TA_ISSUE,			/* sent to driver */
-	__BLK_TA_COMPLETE,		/* completed by driver */
-	__BLK_TA_PLUG,			/* queue was plugged */
-	__BLK_TA_UNPLUG_IO,		/* queue was unplugged by io */
-	__BLK_TA_UNPLUG_TIMER,		/* queue was unplugged by timer */
-	__BLK_TA_INSERT,		/* insert request */
-	__BLK_TA_SPLIT,			/* bio was split */
-	__BLK_TA_BOUNCE,		/* bio was bounced */
-	__BLK_TA_REMAP,			/* bio was remapped */
-	__BLK_TA_ABORT,			/* request aborted */
-	__BLK_TA_DRV_DATA,		/* driver-specific binary data */
-};
-
-/*
- * Notify events.
- */
-enum blktrace_notify {
-	__BLK_TN_PROCESS = 0,		/* establish pid/name mapping */
-	__BLK_TN_TIMESTAMP,		/* include system clock */
-	__BLK_TN_MESSAGE,		/* Character string message */
-};
-
-
-/*
- * Trace actions in full. Additionally, read or write is masked
- */
-#define BLK_TA_QUEUE		(__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_BACKMERGE	(__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_FRONTMERGE	(__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_GETRQ		(__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_SLEEPRQ		(__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_REQUEUE		(__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
-#define BLK_TA_ISSUE		(__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
-#define BLK_TA_COMPLETE		(__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
-#define BLK_TA_PLUG		(__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_IO	(__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_TIMER	(__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_INSERT		(__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_SPLIT		(__BLK_TA_SPLIT)
-#define BLK_TA_BOUNCE		(__BLK_TA_BOUNCE)
-#define BLK_TA_REMAP		(__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_ABORT		(__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_DRV_DATA	(__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
-
-#define BLK_TN_PROCESS		(__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_TIMESTAMP	(__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_MESSAGE		(__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
-
-#define BLK_IO_TRACE_MAGIC	0x65617400
-#define BLK_IO_TRACE_VERSION	0x07
-
-/*
- * The trace itself
- */
-struct blk_io_trace {
-	__u32 magic;		/* MAGIC << 8 | version */
-	__u32 sequence;		/* event number */
-	__u64 time;		/* in microseconds */
-	__u64 sector;		/* disk offset */
-	__u32 bytes;		/* transfer length */
-	__u32 action;		/* what happened */
-	__u32 pid;		/* who did it */
-	__u32 device;		/* device number */
-	__u32 cpu;		/* on what cpu did it happen */
-	__u16 error;		/* completion error */
-	__u16 pdu_len;		/* length of data after this trace */
-};
-
-/*
- * The remap event
- */
-struct blk_io_trace_remap {
-	__be32 device_from;
-	__be32 device_to;
-	__be64 sector_from;
-};
-
-enum {
-	Blktrace_setup = 1,
-	Blktrace_running,
-	Blktrace_stopped,
-};
-
-#define BLKTRACE_BDEV_SIZE	32
-
-/*
- * User setup structure passed with BLKTRACESTART
- */
-struct blk_user_trace_setup {
-	char name[BLKTRACE_BDEV_SIZE];	/* output */
-	__u16 act_mask;			/* input */
-	__u32 buf_size;			/* input */
-	__u32 buf_nr;			/* input */
-	__u64 start_lba;
-	__u64 end_lba;
-	__u32 pid;
-};
+#include <uapi/linux/blktrace_api.h>
 
-#ifdef __KERNEL__
 #if defined(CONFIG_BLK_DEV_IO_TRACE)
 
 #include <linux/sysfs.h>
@@ -250,5 +111,4 @@ extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes);
 
 #endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/bpqether.h b/include/linux/bpqether.h
deleted file mode 100644
index a6c35e1a89ad..000000000000
--- a/include/linux/bpqether.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef	__BPQETHER_H
-#define	__BPQETHER_H
-
-/*
- * 	Defines for the BPQETHER pseudo device driver
- */
-
-#ifndef __LINUX_IF_ETHER_H
-#include <linux/if_ether.h>
-#endif
-
-#define SIOCSBPQETHOPT		(SIOCDEVPRIVATE+0)	/* reserved */
-#define SIOCSBPQETHADDR		(SIOCDEVPRIVATE+1)
- 
-struct bpq_ethaddr {
-	unsigned char destination[ETH_ALEN];
-	unsigned char accept[ETH_ALEN];
-};
-
-/* 
- * For SIOCSBPQETHOPT - this is compatible with PI2/PacketTwin card drivers,
- * currently not implemented, though. If someone wants to hook a radio
- * to his Ethernet card he may find this useful. ;-)
- */
-
-#define SIOCGBPQETHPARAM	0x5000  /* get Level 1 parameters */
-#define SIOCSBPQETHPARAM	0x5001  /* set */
-
-struct bpq_req  {
-    int cmd;
-    int speed;			/* unused */
-    int clockmode;		/* unused */
-    int txdelay;
-    unsigned char persist;	/* unused */
-    int slotime;		/* unused */
-    int squeldelay;
-    int dmachan;		/* unused */
-    int irq;			/* unused */
-};
-
-#endif
diff --git a/include/linux/bsg.h b/include/linux/bsg.h
index ecb4730d0868..7173f6e9d2dd 100644
--- a/include/linux/bsg.h
+++ b/include/linux/bsg.h
@@ -1,67 +1,8 @@
 #ifndef BSG_H
 #define BSG_H
 
-#include <linux/types.h>
+#include <uapi/linux/bsg.h>
 
-#define BSG_PROTOCOL_SCSI		0
-
-#define BSG_SUB_PROTOCOL_SCSI_CMD	0
-#define BSG_SUB_PROTOCOL_SCSI_TMF	1
-#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT	2
-
-/*
- * For flags member below
- * sg.h sg_io_hdr also has bits defined for it's flags member. However
- * none of these bits are implemented/used by bsg. The bits below are
- * allocated to not conflict with sg.h ones anyway.
- */
-#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
-
-struct sg_io_v4 {
-	__s32 guard;		/* [i] 'Q' to differentiate from v3 */
-	__u32 protocol;		/* [i] 0 -> SCSI , .... */
-	__u32 subprotocol;	/* [i] 0 -> SCSI command, 1 -> SCSI task
-				   management function, .... */
-
-	__u32 request_len;	/* [i] in bytes */
-	__u64 request;		/* [i], [*i] {SCSI: cdb} */
-	__u64 request_tag;	/* [i] {SCSI: task tag (only if flagged)} */
-	__u32 request_attr;	/* [i] {SCSI: task attribute} */
-	__u32 request_priority;	/* [i] {SCSI: task priority} */
-	__u32 request_extra;	/* [i] {spare, for padding} */
-	__u32 max_response_len;	/* [i] in bytes */
-	__u64 response;		/* [i], [*o] {SCSI: (auto)sense data} */
-
-        /* "dout_": data out (to device); "din_": data in (from device) */
-	__u32 dout_iovec_count;	/* [i] 0 -> "flat" dout transfer else
-				   dout_xfer points to array of iovec */
-	__u32 dout_xfer_len;	/* [i] bytes to be transferred to device */
-	__u32 din_iovec_count;	/* [i] 0 -> "flat" din transfer */
-	__u32 din_xfer_len;	/* [i] bytes to be transferred from device */
-	__u64 dout_xferp;	/* [i], [*i] */
-	__u64 din_xferp;	/* [i], [*o] */
-
-	__u32 timeout;		/* [i] units: millisecond */
-	__u32 flags;		/* [i] bit mask */
-	__u64 usr_ptr;		/* [i->o] unused internally */
-	__u32 spare_in;		/* [i] */
-
-	__u32 driver_status;	/* [o] 0 -> ok */
-	__u32 transport_status;	/* [o] 0 -> ok */
-	__u32 device_status;	/* [o] {SCSI: command completion status} */
-	__u32 retry_delay;	/* [o] {SCSI: status auxiliary information} */
-	__u32 info;		/* [o] additional information */
-	__u32 duration;		/* [o] time to complete, in milliseconds */
-	__u32 response_len;	/* [o] bytes of response actually written */
-	__s32 din_resid;	/* [o] din_xfer_len - actual_din_xfer_len */
-	__s32 dout_resid;	/* [o] dout_xfer_len - actual_dout_xfer_len */
-	__u64 generated_tag;	/* [o] {SCSI: transport generated task tag} */
-	__u32 spare_out;	/* [o] */
-
-	__u32 padding;
-};
-
-#ifdef __KERNEL__
 
 #if defined(CONFIG_BLK_DEV_BSG)
 struct bsg_class_device {
@@ -89,6 +30,4 @@ static inline void bsg_unregister_queue(struct request_queue *q)
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/can.h b/include/linux/can.h
deleted file mode 100644
index e52958d7c2d1..000000000000
--- a/include/linux/can.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * linux/can.h
- *
- * Definitions for CAN network layer (socket addr / CAN frame / CAN filter)
- *
- * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- *          Urs Thuermann   <urs.thuermann@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_H
-#define CAN_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* controller area network (CAN) kernel definitions */
-
-/* special address description flags for the CAN_ID */
-#define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */
-#define CAN_RTR_FLAG 0x40000000U /* remote transmission request */
-#define CAN_ERR_FLAG 0x20000000U /* error message frame */
-
-/* valid bits in CAN ID for frame formats */
-#define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */
-#define CAN_EFF_MASK 0x1FFFFFFFU /* extended frame format (EFF) */
-#define CAN_ERR_MASK 0x1FFFFFFFU /* omit EFF, RTR, ERR flags */
-
-/*
- * Controller Area Network Identifier structure
- *
- * bit 0-28	: CAN identifier (11/29 bit)
- * bit 29	: error message frame flag (0 = data frame, 1 = error message)
- * bit 30	: remote transmission request flag (1 = rtr frame)
- * bit 31	: frame format flag (0 = standard 11 bit, 1 = extended 29 bit)
- */
-typedef __u32 canid_t;
-
-#define CAN_SFF_ID_BITS		11
-#define CAN_EFF_ID_BITS		29
-
-/*
- * Controller Area Network Error Message Frame Mask structure
- *
- * bit 0-28	: error class mask (see include/linux/can/error.h)
- * bit 29-31	: set to zero
- */
-typedef __u32 can_err_mask_t;
-
-/* CAN payload length and DLC definitions according to ISO 11898-1 */
-#define CAN_MAX_DLC 8
-#define CAN_MAX_DLEN 8
-
-/* CAN FD payload length and DLC definitions according to ISO 11898-7 */
-#define CANFD_MAX_DLC 15
-#define CANFD_MAX_DLEN 64
-
-/**
- * struct can_frame - basic CAN frame structure
- * @can_id:  CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition
- * @can_dlc: frame payload length in byte (0 .. 8) aka data length code
- *           N.B. the DLC field from ISO 11898-1 Chapter 8.4.2.3 has a 1:1
- *           mapping of the 'data length code' to the real payload length
- * @data:    CAN frame payload (up to 8 byte)
- */
-struct can_frame {
-	canid_t can_id;  /* 32 bit CAN_ID + EFF/RTR/ERR flags */
-	__u8    can_dlc; /* frame payload length in byte (0 .. CAN_MAX_DLEN) */
-	__u8    data[CAN_MAX_DLEN] __attribute__((aligned(8)));
-};
-
-/*
- * defined bits for canfd_frame.flags
- *
- * The use of struct canfd_frame implies the Extended Data Length (EDL) bit to
- * be set in the CAN frame bitstream on the wire. The EDL bit switch turns
- * the CAN controllers bitstream processor into the CAN FD mode which creates
- * two new options within the CAN FD frame specification:
- *
- * Bit Rate Switch - to indicate a second bitrate is/was used for the payload
- * Error State Indicator - represents the error state of the transmitting node
- *
- * As the CANFD_ESI bit is internally generated by the transmitting CAN
- * controller only the CANFD_BRS bit is relevant for real CAN controllers when
- * building a CAN FD frame for transmission. Setting the CANFD_ESI bit can make
- * sense for virtual CAN interfaces to test applications with echoed frames.
- */
-#define CANFD_BRS 0x01 /* bit rate switch (second bitrate for payload data) */
-#define CANFD_ESI 0x02 /* error state indicator of the transmitting node */
-
-/**
- * struct canfd_frame - CAN flexible data rate frame structure
- * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition
- * @len:    frame payload length in byte (0 .. CANFD_MAX_DLEN)
- * @flags:  additional flags for CAN FD
- * @__res0: reserved / padding
- * @__res1: reserved / padding
- * @data:   CAN FD frame payload (up to CANFD_MAX_DLEN byte)
- */
-struct canfd_frame {
-	canid_t can_id;  /* 32 bit CAN_ID + EFF/RTR/ERR flags */
-	__u8    len;     /* frame payload length in byte */
-	__u8    flags;   /* additional flags for CAN FD */
-	__u8    __res0;  /* reserved / padding */
-	__u8    __res1;  /* reserved / padding */
-	__u8    data[CANFD_MAX_DLEN] __attribute__((aligned(8)));
-};
-
-#define CAN_MTU		(sizeof(struct can_frame))
-#define CANFD_MTU	(sizeof(struct canfd_frame))
-
-/* particular protocols of the protocol family PF_CAN */
-#define CAN_RAW		1 /* RAW sockets */
-#define CAN_BCM		2 /* Broadcast Manager */
-#define CAN_TP16	3 /* VAG Transport Protocol v1.6 */
-#define CAN_TP20	4 /* VAG Transport Protocol v2.0 */
-#define CAN_MCNET	5 /* Bosch MCNet */
-#define CAN_ISOTP	6 /* ISO 15765-2 Transport Protocol */
-#define CAN_NPROTO	7
-
-#define SOL_CAN_BASE 100
-
-/**
- * struct sockaddr_can - the sockaddr structure for CAN sockets
- * @can_family:  address family number AF_CAN.
- * @can_ifindex: CAN network interface index.
- * @can_addr:    protocol specific address information
- */
-struct sockaddr_can {
-	__kernel_sa_family_t can_family;
-	int         can_ifindex;
-	union {
-		/* transport protocol class address information (e.g. ISOTP) */
-		struct { canid_t rx_id, tx_id; } tp;
-
-		/* reserved for future CAN protocols address information */
-	} can_addr;
-};
-
-/**
- * struct can_filter - CAN ID based filter in can_register().
- * @can_id:   relevant bits of CAN ID which are not masked out.
- * @can_mask: CAN mask (see description)
- *
- * Description:
- * A filter matches, when
- *
- *          <received_can_id> & mask == can_id & mask
- *
- * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can
- * filter for error message frames (CAN_ERR_FLAG bit set in mask).
- */
-struct can_filter {
-	canid_t can_id;
-	canid_t can_mask;
-};
-
-#define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */
-
-#endif /* CAN_H */
diff --git a/include/linux/capability.h b/include/linux/capability.h
index d10b7ed595b1..98503b792369 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -9,82 +9,11 @@
  *
  * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
  */
-
 #ifndef _LINUX_CAPABILITY_H
 #define _LINUX_CAPABILITY_H
 
-#include <linux/types.h>
-
-struct task_struct;
-
-/* User-level do most of the mapping between kernel and user
-   capabilities based on the version tag given by the kernel. The
-   kernel might be somewhat backwards compatible, but don't bet on
-   it. */
-
-/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
-   a set of three capability sets.  The transposition of 3*the
-   following structure to such a composite is better handled in a user
-   library since the draft standard requires the use of malloc/free
-   etc.. */
-
-#define _LINUX_CAPABILITY_VERSION_1  0x19980330
-#define _LINUX_CAPABILITY_U32S_1     1
-
-#define _LINUX_CAPABILITY_VERSION_2  0x20071026  /* deprecated - use v3 */
-#define _LINUX_CAPABILITY_U32S_2     2
-
-#define _LINUX_CAPABILITY_VERSION_3  0x20080522
-#define _LINUX_CAPABILITY_U32S_3     2
-
-typedef struct __user_cap_header_struct {
-	__u32 version;
-	int pid;
-} __user *cap_user_header_t;
-
-typedef struct __user_cap_data_struct {
-        __u32 effective;
-        __u32 permitted;
-        __u32 inheritable;
-} __user *cap_user_data_t;
-
-
-#define VFS_CAP_REVISION_MASK	0xFF000000
-#define VFS_CAP_REVISION_SHIFT	24
-#define VFS_CAP_FLAGS_MASK	~VFS_CAP_REVISION_MASK
-#define VFS_CAP_FLAGS_EFFECTIVE	0x000001
-
-#define VFS_CAP_REVISION_1	0x01000000
-#define VFS_CAP_U32_1           1
-#define XATTR_CAPS_SZ_1         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
-
-#define VFS_CAP_REVISION_2	0x02000000
-#define VFS_CAP_U32_2           2
-#define XATTR_CAPS_SZ_2         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
+#include <uapi/linux/capability.h>
 
-#define XATTR_CAPS_SZ           XATTR_CAPS_SZ_2
-#define VFS_CAP_U32             VFS_CAP_U32_2
-#define VFS_CAP_REVISION	VFS_CAP_REVISION_2
-
-struct vfs_cap_data {
-	__le32 magic_etc;            /* Little endian */
-	struct {
-		__le32 permitted;    /* Little endian */
-		__le32 inheritable;  /* Little endian */
-	} data[VFS_CAP_U32];
-};
-
-#ifndef __KERNEL__
-
-/*
- * Backwardly compatible definition for source code - trapped in a
- * 32-bit world. If you find you need this, please consider using
- * libcap to untrap yourself...
- */
-#define _LINUX_CAPABILITY_VERSION  _LINUX_CAPABILITY_VERSION_1
-#define _LINUX_CAPABILITY_U32S     _LINUX_CAPABILITY_U32S_1
-
-#else
 
 #define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
 #define _KERNEL_CAPABILITY_U32S    _LINUX_CAPABILITY_U32S_3
@@ -105,277 +34,6 @@ struct cpu_vfs_cap_data {
 #define _USER_CAP_HEADER_SIZE  (sizeof(struct __user_cap_header_struct))
 #define _KERNEL_CAP_T_SIZE     (sizeof(kernel_cap_t))
 
-#endif
-
-
-/**
- ** POSIX-draft defined capabilities.
- **/
-
-/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
-   overrides the restriction of changing file ownership and group
-   ownership. */
-
-#define CAP_CHOWN            0
-
-/* Override all DAC access, including ACL execute access if
-   [_POSIX_ACL] is defined. Excluding DAC access covered by
-   CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_OVERRIDE     1
-
-/* Overrides all DAC restrictions regarding read and search on files
-   and directories, including ACL restrictions if [_POSIX_ACL] is
-   defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_READ_SEARCH  2
-
-/* Overrides all restrictions about allowed operations on files, where
-   file owner ID must be equal to the user ID, except where CAP_FSETID
-   is applicable. It doesn't override MAC and DAC restrictions. */
-
-#define CAP_FOWNER           3
-
-/* Overrides the following restrictions that the effective user ID
-   shall match the file owner ID when setting the S_ISUID and S_ISGID
-   bits on that file; that the effective group ID (or one of the
-   supplementary group IDs) shall match the file owner ID when setting
-   the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
-   cleared on successful return from chown(2) (not implemented). */
-
-#define CAP_FSETID           4
-
-/* Overrides the restriction that the real or effective user ID of a
-   process sending a signal must match the real or effective user ID
-   of the process receiving the signal. */
-
-#define CAP_KILL             5
-
-/* Allows setgid(2) manipulation */
-/* Allows setgroups(2) */
-/* Allows forged gids on socket credentials passing. */
-
-#define CAP_SETGID           6
-
-/* Allows set*uid(2) manipulation (including fsuid). */
-/* Allows forged pids on socket credentials passing. */
-
-#define CAP_SETUID           7
-
-
-/**
- ** Linux-specific capabilities
- **/
-
-/* Without VFS support for capabilities:
- *   Transfer any capability in your permitted set to any pid,
- *   remove any capability in your permitted set from any pid
- * With VFS support for capabilities (neither of above, but)
- *   Add any capability from current's capability bounding set
- *       to the current process' inheritable set
- *   Allow taking bits out of capability bounding set
- *   Allow modification of the securebits for a process
- */
-
-#define CAP_SETPCAP          8
-
-/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
-
-#define CAP_LINUX_IMMUTABLE  9
-
-/* Allows binding to TCP/UDP sockets below 1024 */
-/* Allows binding to ATM VCIs below 32 */
-
-#define CAP_NET_BIND_SERVICE 10
-
-/* Allow broadcasting, listen to multicast */
-
-#define CAP_NET_BROADCAST    11
-
-/* Allow interface configuration */
-/* Allow administration of IP firewall, masquerading and accounting */
-/* Allow setting debug option on sockets */
-/* Allow modification of routing tables */
-/* Allow setting arbitrary process / process group ownership on
-   sockets */
-/* Allow binding to any address for transparent proxying (also via NET_RAW) */
-/* Allow setting TOS (type of service) */
-/* Allow setting promiscuous mode */
-/* Allow clearing driver statistics */
-/* Allow multicasting */
-/* Allow read/write of device-specific registers */
-/* Allow activation of ATM control sockets */
-
-#define CAP_NET_ADMIN        12
-
-/* Allow use of RAW sockets */
-/* Allow use of PACKET sockets */
-/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
-
-#define CAP_NET_RAW          13
-
-/* Allow locking of shared memory segments */
-/* Allow mlock and mlockall (which doesn't really have anything to do
-   with IPC) */
-
-#define CAP_IPC_LOCK         14
-
-/* Override IPC ownership checks */
-
-#define CAP_IPC_OWNER        15
-
-/* Insert and remove kernel modules - modify kernel without limit */
-#define CAP_SYS_MODULE       16
-
-/* Allow ioperm/iopl access */
-/* Allow sending USB messages to any device via /proc/bus/usb */
-
-#define CAP_SYS_RAWIO        17
-
-/* Allow use of chroot() */
-
-#define CAP_SYS_CHROOT       18
-
-/* Allow ptrace() of any process */
-
-#define CAP_SYS_PTRACE       19
-
-/* Allow configuration of process accounting */
-
-#define CAP_SYS_PACCT        20
-
-/* Allow configuration of the secure attention key */
-/* Allow administration of the random device */
-/* Allow examination and configuration of disk quotas */
-/* Allow setting the domainname */
-/* Allow setting the hostname */
-/* Allow calling bdflush() */
-/* Allow mount() and umount(), setting up new smb connection */
-/* Allow some autofs root ioctls */
-/* Allow nfsservctl */
-/* Allow VM86_REQUEST_IRQ */
-/* Allow to read/write pci config on alpha */
-/* Allow irix_prctl on mips (setstacksize) */
-/* Allow flushing all cache on m68k (sys_cacheflush) */
-/* Allow removing semaphores */
-/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
-   and shared memory */
-/* Allow locking/unlocking of shared memory segment */
-/* Allow turning swap on/off */
-/* Allow forged pids on socket credentials passing */
-/* Allow setting readahead and flushing buffers on block devices */
-/* Allow setting geometry in floppy driver */
-/* Allow turning DMA on/off in xd driver */
-/* Allow administration of md devices (mostly the above, but some
-   extra ioctls) */
-/* Allow tuning the ide driver */
-/* Allow access to the nvram device */
-/* Allow administration of apm_bios, serial and bttv (TV) device */
-/* Allow manufacturer commands in isdn CAPI support driver */
-/* Allow reading non-standardized portions of pci configuration space */
-/* Allow DDI debug ioctl on sbpcd driver */
-/* Allow setting up serial ports */
-/* Allow sending raw qic-117 commands */
-/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
-   arbitrary SCSI commands */
-/* Allow setting encryption key on loopback filesystem */
-/* Allow setting zone reclaim policy */
-
-#define CAP_SYS_ADMIN        21
-
-/* Allow use of reboot() */
-
-#define CAP_SYS_BOOT         22
-
-/* Allow raising priority and setting priority on other (different
-   UID) processes */
-/* Allow use of FIFO and round-robin (realtime) scheduling on own
-   processes and setting the scheduling algorithm used by another
-   process. */
-/* Allow setting cpu affinity on other processes */
-
-#define CAP_SYS_NICE         23
-
-/* Override resource limits. Set resource limits. */
-/* Override quota limits. */
-/* Override reserved space on ext2 filesystem */
-/* Modify data journaling mode on ext3 filesystem (uses journaling
-   resources) */
-/* NOTE: ext2 honors fsuid when checking for resource overrides, so
-   you can override using fsuid too */
-/* Override size restrictions on IPC message queues */
-/* Allow more than 64hz interrupts from the real-time clock */
-/* Override max number of consoles on console allocation */
-/* Override max number of keymaps */
-
-#define CAP_SYS_RESOURCE     24
-
-/* Allow manipulation of system clock */
-/* Allow irix_stime on mips */
-/* Allow setting the real-time clock */
-
-#define CAP_SYS_TIME         25
-
-/* Allow configuration of tty devices */
-/* Allow vhangup() of tty */
-
-#define CAP_SYS_TTY_CONFIG   26
-
-/* Allow the privileged aspects of mknod() */
-
-#define CAP_MKNOD            27
-
-/* Allow taking of leases on files */
-
-#define CAP_LEASE            28
-
-#define CAP_AUDIT_WRITE      29
-
-#define CAP_AUDIT_CONTROL    30
-
-#define CAP_SETFCAP	     31
-
-/* Override MAC access.
-   The base kernel enforces no MAC policy.
-   An LSM may enforce a MAC policy, and if it does and it chooses
-   to implement capability based overrides of that policy, this is
-   the capability it should use to do so. */
-
-#define CAP_MAC_OVERRIDE     32
-
-/* Allow MAC configuration or state changes.
-   The base kernel requires no MAC configuration.
-   An LSM may enforce a MAC policy, and if it does and it chooses
-   to implement capability based checks on modifications to that
-   policy or the data required to maintain it, this is the
-   capability it should use to do so. */
-
-#define CAP_MAC_ADMIN        33
-
-/* Allow configuring the kernel's syslog (printk behaviour) */
-
-#define CAP_SYSLOG           34
-
-/* Allow triggering something that will wake the system */
-
-#define CAP_WAKE_ALARM            35
-
-/* Allow preventing system suspends */
-
-#define CAP_BLOCK_SUSPEND    36
-
-#define CAP_LAST_CAP         CAP_BLOCK_SUSPEND
-
-#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
-
-/*
- * Bit location of each capability (used by user-space library and kernel)
- */
-
-#define CAP_TO_INDEX(x)     ((x) >> 5)        /* 1 << 5 == bits in __u32 */
-#define CAP_TO_MASK(x)      (1 << ((x) & 31)) /* mask for indexed __u32 */
-
-#ifdef __KERNEL__
 
 struct inode;
 struct dentry;
@@ -557,6 +215,4 @@ extern bool inode_capable(const struct inode *inode, int cap);
 /* audit system wants to get cap info from files as well */
 extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
 
-#endif /* __KERNEL__ */
-
 #endif /* !_LINUX_CAPABILITY_H */
diff --git a/include/linux/capi.h b/include/linux/capi.h
deleted file mode 100644
index 65100d6cb89b..000000000000
--- a/include/linux/capi.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* $Id: capi.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
- * 
- * CAPI 2.0 Interface for Linux
- * 
- * Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
- * 
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef __LINUX_CAPI_H__
-#define __LINUX_CAPI_H__
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#ifndef __KERNEL__
-#include <linux/kernelcapi.h>
-#endif
-
-/*
- * CAPI_REGISTER
- */
-
-typedef struct capi_register_params {	/* CAPI_REGISTER */
-	__u32 level3cnt;	/* No. of simulatneous user data connections */
-	__u32 datablkcnt;	/* No. of buffered data messages */
-	__u32 datablklen;	/* Size of buffered data messages */
-} capi_register_params;
-
-#define	CAPI_REGISTER	_IOW('C',0x01,struct capi_register_params)
-
-/*
- * CAPI_GET_MANUFACTURER
- */
-
-#define CAPI_MANUFACTURER_LEN		64
-
-#define	CAPI_GET_MANUFACTURER	_IOWR('C',0x06,int)	/* broken: wanted size 64 (CAPI_MANUFACTURER_LEN) */
-
-/*
- * CAPI_GET_VERSION
- */
-
-typedef struct capi_version {
-	__u32 majorversion;
-	__u32 minorversion;
-	__u32 majormanuversion;
-	__u32 minormanuversion;
-} capi_version;
-
-#define CAPI_GET_VERSION	_IOWR('C',0x07,struct capi_version)
-
-/*
- * CAPI_GET_SERIAL
- */
-
-#define CAPI_SERIAL_LEN		8
-#define CAPI_GET_SERIAL		_IOWR('C',0x08,int)	/* broken: wanted size 8 (CAPI_SERIAL_LEN) */
-
-/*
- * CAPI_GET_PROFILE
- */
-
-typedef struct capi_profile {
-	__u16 ncontroller;	/* number of installed controller */
-	__u16 nbchannel;	/* number of B-Channels */
-	__u32 goptions;		/* global options */
-	__u32 support1;		/* B1 protocols support */
-	__u32 support2;		/* B2 protocols support */
-	__u32 support3;		/* B3 protocols support */
-	__u32 reserved[6];	/* reserved */
-	__u32 manu[5];		/* manufacturer specific information */
-} capi_profile;
-
-#define CAPI_GET_PROFILE	_IOWR('C',0x09,struct capi_profile)
-
-typedef struct capi_manufacturer_cmd {
-	unsigned long cmd;
-	void __user *data;
-} capi_manufacturer_cmd;
-
-/*
- * CAPI_MANUFACTURER_CMD
- */
-
-#define CAPI_MANUFACTURER_CMD	_IOWR('C',0x20, struct capi_manufacturer_cmd)
-
-/*
- * CAPI_GET_ERRCODE
- * capi errcode is set, * if read, write, or ioctl returns EIO,
- * ioctl returns errcode directly, and in arg, if != 0
- */
-
-#define CAPI_GET_ERRCODE	_IOR('C',0x21, __u16)
-
-/*
- * CAPI_INSTALLED
- */
-#define CAPI_INSTALLED		_IOR('C',0x22, __u16)
-
-
-/*
- * member contr is input for
- * CAPI_GET_MANUFACTURER, CAPI_VERSION, CAPI_GET_SERIAL
- * and CAPI_GET_PROFILE
- */
-typedef union capi_ioctl_struct {
-	__u32 contr;
-	capi_register_params rparams;
-	__u8 manufacturer[CAPI_MANUFACTURER_LEN];
-	capi_version version;
-	__u8 serial[CAPI_SERIAL_LEN];
-	capi_profile profile;
-	capi_manufacturer_cmd cmd;
-	__u16 errcode;
-} capi_ioctl_struct;
-
-/*
- * Middleware extension
- */
-
-#define CAPIFLAG_HIGHJACKING	0x0001
-
-#define CAPI_GET_FLAGS		_IOR('C',0x23, unsigned)
-#define CAPI_SET_FLAGS		_IOR('C',0x24, unsigned)
-#define CAPI_CLR_FLAGS		_IOR('C',0x25, unsigned)
-
-#define CAPI_NCCI_OPENCOUNT	_IOR('C',0x26, unsigned)
-
-#define CAPI_NCCI_GETUNIT	_IOR('C',0x27, unsigned)
-
-#endif				/* __LINUX_CAPI_H__ */
diff --git a/include/linux/cciss_defs.h b/include/linux/cciss_defs.h
deleted file mode 100644
index 316b670d4e33..000000000000
--- a/include/linux/cciss_defs.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef CCISS_DEFS_H
-#define CCISS_DEFS_H
-
-#include <linux/types.h>
-
-/* general boundary definitions */
-#define SENSEINFOBYTES          32 /* note that this value may vary
-				      between host implementations */
-
-/* Command Status value */
-#define CMD_SUCCESS             0x0000
-#define CMD_TARGET_STATUS       0x0001
-#define CMD_DATA_UNDERRUN       0x0002
-#define CMD_DATA_OVERRUN        0x0003
-#define CMD_INVALID             0x0004
-#define CMD_PROTOCOL_ERR        0x0005
-#define CMD_HARDWARE_ERR        0x0006
-#define CMD_CONNECTION_LOST     0x0007
-#define CMD_ABORTED             0x0008
-#define CMD_ABORT_FAILED        0x0009
-#define CMD_UNSOLICITED_ABORT   0x000A
-#define CMD_TIMEOUT             0x000B
-#define CMD_UNABORTABLE		0x000C
-
-/* transfer direction */
-#define XFER_NONE               0x00
-#define XFER_WRITE              0x01
-#define XFER_READ               0x02
-#define XFER_RSVD               0x03
-
-/* task attribute */
-#define ATTR_UNTAGGED           0x00
-#define ATTR_SIMPLE             0x04
-#define ATTR_HEADOFQUEUE        0x05
-#define ATTR_ORDERED            0x06
-#define ATTR_ACA                0x07
-
-/* cdb type */
-#define TYPE_CMD				0x00
-#define TYPE_MSG				0x01
-
-/* Type defs used in the following structs */
-#define BYTE __u8
-#define WORD __u16
-#define HWORD __u16
-#define DWORD __u32
-
-#define CISS_MAX_LUN	1024
-
-#define LEVEL2LUN   1 /* index into Target(x) structure, due to byte swapping */
-#define LEVEL3LUN   0
-
-#pragma pack(1)
-
-/* Command List Structure */
-typedef union _SCSI3Addr_struct {
-   struct {
-    BYTE Dev;
-    BYTE Bus:6;
-    BYTE Mode:2;        /* b00 */
-  } PeripDev;
-   struct {
-    BYTE DevLSB;
-    BYTE DevMSB:6;
-    BYTE Mode:2;        /* b01 */
-  } LogDev;
-   struct {
-    BYTE Dev:5;
-    BYTE Bus:3;
-    BYTE Targ:6;
-    BYTE Mode:2;        /* b10 */
-  } LogUnit;
-} SCSI3Addr_struct;
-
-typedef struct _PhysDevAddr_struct {
-  DWORD             TargetId:24;
-  DWORD             Bus:6;
-  DWORD             Mode:2;
-  SCSI3Addr_struct  Target[2]; /* 2 level target device addr */
-} PhysDevAddr_struct;
-
-typedef struct _LogDevAddr_struct {
-  DWORD            VolId:30;
-  DWORD            Mode:2;
-  BYTE             reserved[4];
-} LogDevAddr_struct;
-
-typedef union _LUNAddr_struct {
-  BYTE               LunAddrBytes[8];
-  SCSI3Addr_struct   SCSI3Lun[4];
-  PhysDevAddr_struct PhysDev;
-  LogDevAddr_struct  LogDev;
-} LUNAddr_struct;
-
-typedef struct _RequestBlock_struct {
-  BYTE   CDBLen;
-  struct {
-    BYTE Type:3;
-    BYTE Attribute:3;
-    BYTE Direction:2;
-  } Type;
-  HWORD  Timeout;
-  BYTE   CDB[16];
-} RequestBlock_struct;
-
-typedef union _MoreErrInfo_struct{
-  struct {
-    BYTE  Reserved[3];
-    BYTE  Type;
-    DWORD ErrorInfo;
-  } Common_Info;
-  struct{
-    BYTE  Reserved[2];
-    BYTE  offense_size; /* size of offending entry */
-    BYTE  offense_num;  /* byte # of offense 0-base */
-    DWORD offense_value;
-  } Invalid_Cmd;
-} MoreErrInfo_struct;
-typedef struct _ErrorInfo_struct {
-  BYTE               ScsiStatus;
-  BYTE               SenseLen;
-  HWORD              CommandStatus;
-  DWORD              ResidualCnt;
-  MoreErrInfo_struct MoreErrInfo;
-  BYTE               SenseInfo[SENSEINFOBYTES];
-} ErrorInfo_struct;
-
-#pragma pack()
-
-#endif /* CCISS_DEFS_H */
diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h
index 986493f5b92b..84b6e2d0f44d 100644
--- a/include/linux/cciss_ioctl.h
+++ b/include/linux/cciss_ioctl.h
@@ -1,91 +1,8 @@
 #ifndef CCISS_IOCTLH
 #define CCISS_IOCTLH
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/cciss_defs.h>
+#include <uapi/linux/cciss_ioctl.h>
 
-#define CCISS_IOC_MAGIC 'B'
-
-
-typedef struct _cciss_pci_info_struct
-{
-	unsigned char 	bus;
-	unsigned char 	dev_fn;
-	unsigned short	domain;
-	__u32 		board_id;
-} cciss_pci_info_struct; 
-
-typedef struct _cciss_coalint_struct
-{
-	__u32  delay;
-	__u32  count;
-} cciss_coalint_struct;
-
-typedef char NodeName_type[16];
-
-typedef __u32 Heartbeat_type;
-
-#define CISS_PARSCSIU2 	0x0001
-#define CISS_PARCSCIU3 	0x0002
-#define CISS_FIBRE1G	0x0100
-#define CISS_FIBRE2G	0x0200
-typedef __u32 BusTypes_type;
-
-typedef char FirmwareVer_type[4];
-typedef __u32 DriverVer_type;
-
-#define MAX_KMALLOC_SIZE 128000
-
-typedef struct _IOCTL_Command_struct {
-  LUNAddr_struct	   LUN_info;
-  RequestBlock_struct      Request;
-  ErrorInfo_struct  	   error_info; 
-  WORD			   buf_size;  /* size in bytes of the buf */
-  BYTE			   __user *buf;
-} IOCTL_Command_struct;
-
-typedef struct _BIG_IOCTL_Command_struct {
-  LUNAddr_struct	   LUN_info;
-  RequestBlock_struct      Request;
-  ErrorInfo_struct  	   error_info;
-  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
-  DWORD			   buf_size;    /* size in bytes of the buf */
-  				        /* < malloc_size * MAXSGENTRIES */
-  BYTE			   __user *buf;
-} BIG_IOCTL_Command_struct;
-
-typedef struct _LogvolInfo_struct{
-	__u32	LunID;
-	int	num_opens;  /* number of opens on the logical volume */
-	int	num_parts;  /* number of partitions configured on logvol */
-} LogvolInfo_struct;
-
-#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
-
-#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
-#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
-
-#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
-#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
-
-#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
-#define CCISS_GETBUSTYPES  _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
-#define CCISS_GETFIRMVER   _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
-#define CCISS_GETDRIVVER   _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
-#define CCISS_REVALIDVOLS  _IO(CCISS_IOC_MAGIC, 10)
-#define CCISS_PASSTHRU	   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
-#define CCISS_DEREGDISK	   _IO(CCISS_IOC_MAGIC, 12)
-
-/* no longer used... use REGNEWD instead */ 
-#define CCISS_REGNEWDISK  _IOW(CCISS_IOC_MAGIC, 13, int)
-
-#define CCISS_REGNEWD	   _IO(CCISS_IOC_MAGIC, 14)
-#define CCISS_RESCANDISK   _IO(CCISS_IOC_MAGIC, 16)
-#define CCISS_GETLUNINFO   _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
-#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 
 /* 32 bit compatible ioctl structs */
@@ -111,5 +28,4 @@ typedef struct _BIG_IOCTL32_Command_struct {
 #define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct)
 
 #endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
 #endif  
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
index dfd7f187c351..8609d577bb66 100644
--- a/include/linux/cdrom.h
+++ b/include/linux/cdrom.h
@@ -7,910 +7,12 @@
  *               1997, 1998   Erik Andersen, andersee@debian.org
  *               1998-2002    Jens Axboe, axboe@suse.de
  */
- 
 #ifndef	_LINUX_CDROM_H
 #define	_LINUX_CDROM_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*******************************************************
- * As of Linux 2.1.x, all Linux CD-ROM application programs will use this 
- * (and only this) include file.  It is my hope to provide Linux with
- * a uniform interface between software accessing CD-ROMs and the various 
- * device drivers that actually talk to the drives.  There may still be
- * 23 different kinds of strange CD-ROM drives, but at least there will 
- * now be one, and only one, Linux CD-ROM interface.
- *
- * Additionally, as of Linux 2.1.x, all Linux application programs 
- * should use the O_NONBLOCK option when opening a CD-ROM device 
- * for subsequent ioctl commands.  This allows for neat system errors 
- * like "No medium found" or "Wrong medium type" upon attempting to 
- * mount or play an empty slot, mount an audio disc, or play a data disc.
- * Generally, changing an application program to support O_NONBLOCK
- * is as easy as the following:
- *       -    drive = open("/dev/cdrom", O_RDONLY);
- *       +    drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
- * It is worth the small change.
- *
- *  Patches for many common CD programs (provided by David A. van Leeuwen)
- *  can be found at:  ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
- * 
- *******************************************************/
-
-/* When a driver supports a certain function, but the cdrom drive we are 
- * using doesn't, we will return the error EDRIVE_CANT_DO_THIS.  We will 
- * borrow the "Operation not supported" error from the network folks to 
- * accomplish this.  Maybe someday we will get a more targeted error code, 
- * but this will do for now... */
-#define EDRIVE_CANT_DO_THIS  EOPNOTSUPP
-
-/*******************************************************
- * The CD-ROM IOCTL commands  -- these should be supported by 
- * all the various cdrom drivers.  For the CD-ROM ioctls, we 
- * will commandeer byte 0x53, or 'S'.
- *******************************************************/
-#define CDROMPAUSE		0x5301 /* Pause Audio Operation */ 
-#define CDROMRESUME		0x5302 /* Resume paused Audio Operation */
-#define CDROMPLAYMSF		0x5303 /* Play Audio MSF (struct cdrom_msf) */
-#define CDROMPLAYTRKIND		0x5304 /* Play Audio Track/index 
-                                           (struct cdrom_ti) */
-#define CDROMREADTOCHDR		0x5305 /* Read TOC header 
-                                           (struct cdrom_tochdr) */
-#define CDROMREADTOCENTRY	0x5306 /* Read TOC entry 
-                                           (struct cdrom_tocentry) */
-#define CDROMSTOP		0x5307 /* Stop the cdrom drive */
-#define CDROMSTART		0x5308 /* Start the cdrom drive */
-#define CDROMEJECT		0x5309 /* Ejects the cdrom media */
-#define CDROMVOLCTRL		0x530a /* Control output volume 
-                                           (struct cdrom_volctrl) */
-#define CDROMSUBCHNL		0x530b /* Read subchannel data 
-                                           (struct cdrom_subchnl) */
-#define CDROMREADMODE2		0x530c /* Read CDROM mode 2 data (2336 Bytes) 
-                                           (struct cdrom_read) */
-#define CDROMREADMODE1		0x530d /* Read CDROM mode 1 data (2048 Bytes)
-                                           (struct cdrom_read) */
-#define CDROMREADAUDIO		0x530e /* (struct cdrom_read_audio) */
-#define CDROMEJECT_SW		0x530f /* enable(1)/disable(0) auto-ejecting */
-#define CDROMMULTISESSION	0x5310 /* Obtain the start-of-last-session 
-                                           address of multi session disks 
-                                           (struct cdrom_multisession) */
-#define CDROM_GET_MCN		0x5311 /* Obtain the "Universal Product Code" 
-                                           if available (struct cdrom_mcn) */
-#define CDROM_GET_UPC		CDROM_GET_MCN  /* This one is deprecated, 
-                                          but here anyway for compatibility */
-#define CDROMRESET		0x5312 /* hard-reset the drive */
-#define CDROMVOLREAD		0x5313 /* Get the drive's volume setting 
-                                          (struct cdrom_volctrl) */
-#define CDROMREADRAW		0x5314	/* read data in raw mode (2352 Bytes)
-                                           (struct cdrom_read) */
-/* 
- * These ioctls are used only used in aztcd.c and optcd.c
- */
-#define CDROMREADCOOKED		0x5315	/* read data in cooked mode */
-#define CDROMSEEK		0x5316  /* seek msf address */
-  
-/*
- * This ioctl is only used by the scsi-cd driver.  
-   It is for playing audio in logical block addressing mode.
- */
-#define CDROMPLAYBLK		0x5317	/* (struct cdrom_blk) */
-
-/* 
- * These ioctls are only used in optcd.c
- */
-#define CDROMREADALL		0x5318	/* read all 2646 bytes */
-
-/* 
- * These ioctls are (now) only in ide-cd.c for controlling 
- * drive spindown time.  They should be implemented in the
- * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
- * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
- *  -Erik
- */
-#define CDROMGETSPINDOWN        0x531d
-#define CDROMSETSPINDOWN        0x531e
-
-/* 
- * These ioctls are implemented through the uniform CD-ROM driver
- * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
- * drivers are eventually ported to the uniform CD-ROM driver interface.
- */
-#define CDROMCLOSETRAY		0x5319	/* pendant of CDROMEJECT */
-#define CDROM_SET_OPTIONS	0x5320  /* Set behavior options */
-#define CDROM_CLEAR_OPTIONS	0x5321  /* Clear behavior options */
-#define CDROM_SELECT_SPEED	0x5322  /* Set the CD-ROM speed */
-#define CDROM_SELECT_DISC	0x5323  /* Select disc (for juke-boxes) */
-#define CDROM_MEDIA_CHANGED	0x5325  /* Check is media changed  */
-#define CDROM_DRIVE_STATUS	0x5326  /* Get tray position, etc. */
-#define CDROM_DISC_STATUS	0x5327  /* Get disc type, etc. */
-#define CDROM_CHANGER_NSLOTS    0x5328  /* Get number of slots */
-#define CDROM_LOCKDOOR		0x5329  /* lock or unlock door */
-#define CDROM_DEBUG		0x5330	/* Turn debug messages on/off */
-#define CDROM_GET_CAPABILITY	0x5331	/* get capabilities */
-
-/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
- * Future CDROM ioctls should be kept below 0x537F
- */
-
-/* This ioctl is only used by sbpcd at the moment */
-#define CDROMAUDIOBUFSIZ        0x5382	/* set the audio buffer size */
-					/* conflict with SCSI_IOCTL_GET_IDLUN */
-
-/* DVD-ROM Specific ioctls */
-#define DVD_READ_STRUCT		0x5390  /* Read structure */
-#define DVD_WRITE_STRUCT	0x5391  /* Write structure */
-#define DVD_AUTH		0x5392  /* Authentication */
-
-#define CDROM_SEND_PACKET	0x5393	/* send a packet to the drive */
-#define CDROM_NEXT_WRITABLE	0x5394	/* get next writable block */
-#define CDROM_LAST_WRITTEN	0x5395	/* get last block written on disc */
-
-/*******************************************************
- * CDROM IOCTL structures
- *******************************************************/
-
-/* Address in MSF format */
-struct cdrom_msf0		
-{
-	__u8	minute;
-	__u8	second;
-	__u8	frame;
-};
-
-/* Address in either MSF or logical format */
-union cdrom_addr		
-{
-	struct cdrom_msf0	msf;
-	int			lba;
-};
-
-/* This struct is used by the CDROMPLAYMSF ioctl */ 
-struct cdrom_msf 
-{
-	__u8	cdmsf_min0;	/* start minute */
-	__u8	cdmsf_sec0;	/* start second */
-	__u8	cdmsf_frame0;	/* start frame */
-	__u8	cdmsf_min1;	/* end minute */
-	__u8	cdmsf_sec1;	/* end second */
-	__u8	cdmsf_frame1;	/* end frame */
-};
-
-/* This struct is used by the CDROMPLAYTRKIND ioctl */
-struct cdrom_ti 
-{
-	__u8	cdti_trk0;	/* start track */
-	__u8	cdti_ind0;	/* start index */
-	__u8	cdti_trk1;	/* end track */
-	__u8	cdti_ind1;	/* end index */
-};
-
-/* This struct is used by the CDROMREADTOCHDR ioctl */
-struct cdrom_tochdr 	
-{
-	__u8	cdth_trk0;	/* start track */
-	__u8	cdth_trk1;	/* end track */
-};
-
-/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
-struct cdrom_volctrl
-{
-	__u8	channel0;
-	__u8	channel1;
-	__u8	channel2;
-	__u8	channel3;
-};
-
-/* This struct is used by the CDROMSUBCHNL ioctl */
-struct cdrom_subchnl 
-{
-	__u8	cdsc_format;
-	__u8	cdsc_audiostatus;
-	__u8	cdsc_adr:	4;
-	__u8	cdsc_ctrl:	4;
-	__u8	cdsc_trk;
-	__u8	cdsc_ind;
-	union cdrom_addr cdsc_absaddr;
-	union cdrom_addr cdsc_reladdr;
-};
-
-
-/* This struct is used by the CDROMREADTOCENTRY ioctl */
-struct cdrom_tocentry 
-{
-	__u8	cdte_track;
-	__u8	cdte_adr	:4;
-	__u8	cdte_ctrl	:4;
-	__u8	cdte_format;
-	union cdrom_addr cdte_addr;
-	__u8	cdte_datamode;
-};
-
-/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
-struct cdrom_read      
-{
-	int	cdread_lba;
-	char 	*cdread_bufaddr;
-	int	cdread_buflen;
-};
-
-/* This struct is used by the CDROMREADAUDIO ioctl */
-struct cdrom_read_audio
-{
-	union cdrom_addr addr; /* frame address */
-	__u8 addr_format;      /* CDROM_LBA or CDROM_MSF */
-	int nframes;           /* number of 2352-byte-frames to read at once */
-	__u8 __user *buf;      /* frame buffer (size: nframes*2352 bytes) */
-};
-
-/* This struct is used with the CDROMMULTISESSION ioctl */
-struct cdrom_multisession
-{
-	union cdrom_addr addr; /* frame address: start-of-last-session 
-	                           (not the new "frame 16"!).  Only valid
-	                           if the "xa_flag" is true. */
-	__u8 xa_flag;        /* 1: "is XA disk" */
-	__u8 addr_format;    /* CDROM_LBA or CDROM_MSF */
-};
-
-/* This struct is used with the CDROM_GET_MCN ioctl.  
- * Very few audio discs actually have Universal Product Code information, 
- * which should just be the Medium Catalog Number on the box.  Also note 
- * that the way the codeis written on CD is _not_ uniform across all discs!
- */  
-struct cdrom_mcn 
-{
-  __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
-};
-
-/* This is used by the CDROMPLAYBLK ioctl */
-struct cdrom_blk 
-{
-	unsigned from;
-	unsigned short len;
-};
-
-#define CDROM_PACKET_SIZE	12
-
-#define CGC_DATA_UNKNOWN	0
-#define CGC_DATA_WRITE		1
-#define CGC_DATA_READ		2
-#define CGC_DATA_NONE		3
-
-/* for CDROM_PACKET_COMMAND ioctl */
-struct cdrom_generic_command
-{
-	unsigned char 		cmd[CDROM_PACKET_SIZE];
-	unsigned char		__user *buffer;
-	unsigned int 		buflen;
-	int			stat;
-	struct request_sense	__user *sense;
-	unsigned char		data_direction;
-	int			quiet;
-	int			timeout;
-	void			__user *reserved[1];	/* unused, actually */
-};
-
-/*
- * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, 
- * 2340, or 2352 bytes long.  
-
-*         Sector types of the standard CD-ROM data formats:
- *
- * format   sector type               user data size (bytes)
- * -----------------------------------------------------------------------------
- *   1     (Red Book)    CD-DA          2352    (CD_FRAMESIZE_RAW)
- *   2     (Yellow Book) Mode1 Form1    2048    (CD_FRAMESIZE)
- *   3     (Yellow Book) Mode1 Form2    2336    (CD_FRAMESIZE_RAW0)
- *   4     (Green Book)  Mode2 Form1    2048    (CD_FRAMESIZE)
- *   5     (Green Book)  Mode2 Form2    2328    (2324+4 spare bytes)
- *
- *
- *       The layout of the standard CD-ROM data formats:
- * -----------------------------------------------------------------------------
- * - audio (red):                  | audio_sample_bytes |
- *                                 |        2352        |
- *
- * - data (yellow, mode1):         | sync - head - data - EDC - zero - ECC |
- *                                 |  12  -   4  - 2048 -  4  -   8  - 276 |
- *
- * - data (yellow, mode2):         | sync - head - data |
- *                                 |  12  -   4  - 2336 |
- *
- * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
- *                                 |  12  -   4  -  8  - 2048 -  4  - 276 |
- *
- * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
- *                                 |  12  -   4  -  8  - 2324 -  4    |
- *
- */
-
-/* Some generally useful CD-ROM information -- mostly based on the above */
-#define CD_MINS              74 /* max. minutes per CD, not really a limit */
-#define CD_SECS              60 /* seconds per minute */
-#define CD_FRAMES            75 /* frames per second */
-#define CD_SYNC_SIZE         12 /* 12 sync bytes per raw data frame */
-#define CD_MSF_OFFSET       150 /* MSF numbering offset of first frame */
-#define CD_CHUNK_SIZE        24 /* lowest-level "data bytes piece" */
-#define CD_NUM_OF_CHUNKS     98 /* chunks per frame */
-#define CD_FRAMESIZE_SUB     96 /* subchannel data "frame" size */
-#define CD_HEAD_SIZE          4 /* header (address) bytes per raw data frame */
-#define CD_SUBHEAD_SIZE       8 /* subheader bytes per raw XA data frame */
-#define CD_EDC_SIZE           4 /* bytes EDC per most raw data frame types */
-#define CD_ZERO_SIZE          8 /* bytes zero per yellow book mode 1 frame */
-#define CD_ECC_SIZE         276 /* bytes ECC per most raw data frame types */
-#define CD_FRAMESIZE       2048 /* bytes per frame, "cooked" mode */
-#define CD_FRAMESIZE_RAW   2352 /* bytes per frame, "raw" mode */
-#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ 
-/* most drives don't deliver everything: */
-#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
-#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
-
-#define CD_XA_HEAD        (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
-#define CD_XA_TAIL        (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
-#define CD_XA_SYNC_HEAD   (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
-
-/* CD-ROM address types (cdrom_tocentry.cdte_format) */
-#define	CDROM_LBA 0x01 /* "logical block": first frame is #0 */
-#define	CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
-
-/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
-#define	CDROM_DATA_TRACK	0x04
-
-/* The leadout track is always 0xAA, regardless of # of tracks on disc */
-#define	CDROM_LEADOUT		0xAA
-
-/* audio states (from SCSI-2, but seen with other drives, too) */
-#define	CDROM_AUDIO_INVALID	0x00	/* audio status not supported */
-#define	CDROM_AUDIO_PLAY	0x11	/* audio play operation in progress */
-#define	CDROM_AUDIO_PAUSED	0x12	/* audio play operation paused */
-#define	CDROM_AUDIO_COMPLETED	0x13	/* audio play successfully completed */
-#define	CDROM_AUDIO_ERROR	0x14	/* audio play stopped due to error */
-#define	CDROM_AUDIO_NO_STATUS	0x15	/* no current audio status to return */
-
-/* capability flags used with the uniform CD-ROM driver */ 
-#define CDC_CLOSE_TRAY		0x1     /* caddy systems _can't_ close */
-#define CDC_OPEN_TRAY		0x2     /* but _can_ eject.  */
-#define CDC_LOCK		0x4     /* disable manual eject */
-#define CDC_SELECT_SPEED 	0x8     /* programmable speed */
-#define CDC_SELECT_DISC		0x10    /* select disc from juke-box */
-#define CDC_MULTI_SESSION 	0x20    /* read sessions>1 */
-#define CDC_MCN			0x40    /* Medium Catalog Number */
-#define CDC_MEDIA_CHANGED 	0x80    /* media changed */
-#define CDC_PLAY_AUDIO		0x100   /* audio functions */
-#define CDC_RESET               0x200   /* hard reset device */
-#define CDC_DRIVE_STATUS        0x800   /* driver implements drive status */
-#define CDC_GENERIC_PACKET	0x1000	/* driver implements generic packets */
-#define CDC_CD_R		0x2000	/* drive is a CD-R */
-#define CDC_CD_RW		0x4000	/* drive is a CD-RW */
-#define CDC_DVD			0x8000	/* drive is a DVD */
-#define CDC_DVD_R		0x10000	/* drive can write DVD-R */
-#define CDC_DVD_RAM		0x20000	/* drive can write DVD-RAM */
-#define CDC_MO_DRIVE		0x40000 /* drive is an MO device */
-#define CDC_MRW			0x80000 /* drive can read MRW */
-#define CDC_MRW_W		0x100000 /* drive can write MRW */
-#define CDC_RAM			0x200000 /* ok to open for WRITE */
-
-/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
-#define CDS_NO_INFO		0	/* if not implemented */
-#define CDS_NO_DISC		1
-#define CDS_TRAY_OPEN		2
-#define CDS_DRIVE_NOT_READY	3
-#define CDS_DISC_OK		4
-
-/* return values for the CDROM_DISC_STATUS ioctl */
-/* can also return CDS_NO_[INFO|DISC], from above */
-#define CDS_AUDIO		100
-#define CDS_DATA_1		101
-#define CDS_DATA_2		102
-#define CDS_XA_2_1		103
-#define CDS_XA_2_2		104
-#define CDS_MIXED		105
-
-/* User-configurable behavior options for the uniform CD-ROM driver */
-#define CDO_AUTO_CLOSE		0x1     /* close tray on first open() */
-#define CDO_AUTO_EJECT		0x2     /* open tray on last release() */
-#define CDO_USE_FFLAGS		0x4     /* use O_NONBLOCK information on open */
-#define CDO_LOCK		0x8     /* lock tray on open files */
-#define CDO_CHECK_TYPE		0x10    /* check type on open for data */
-
-/* Special codes used when specifying changer slots. */
-#define CDSL_NONE       	(INT_MAX-1)
-#define CDSL_CURRENT    	INT_MAX
-
-/* For partition based multisession access. IDE can handle 64 partitions
- * per drive - SCSI CD-ROM's use minors to differentiate between the
- * various drives, so we can't do multisessions the same way there.
- * Use the -o session=x option to mount on them.
- */
-#define CD_PART_MAX		64
-#define CD_PART_MASK		(CD_PART_MAX - 1)
-
-/*********************************************************************
- * Generic Packet commands, MMC commands, and such
- *********************************************************************/
-
- /* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-#define GPCMD_BLANK			    0xa1
-#define GPCMD_CLOSE_TRACK		    0x5b
-#define GPCMD_FLUSH_CACHE		    0x35
-#define GPCMD_FORMAT_UNIT		    0x04
-#define GPCMD_GET_CONFIGURATION		    0x46
-#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define GPCMD_GET_PERFORMANCE		    0xac
-#define GPCMD_INQUIRY			    0x12
-#define GPCMD_LOAD_UNLOAD		    0xa6
-#define GPCMD_MECHANISM_STATUS		    0xbd
-#define GPCMD_MODE_SELECT_10		    0x55
-#define GPCMD_MODE_SENSE_10		    0x5a
-#define GPCMD_PAUSE_RESUME		    0x4b
-#define GPCMD_PLAY_AUDIO_10		    0x45
-#define GPCMD_PLAY_AUDIO_MSF		    0x47
-#define GPCMD_PLAY_AUDIO_TI		    0x48
-#define GPCMD_PLAY_CD			    0xbc
-#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
-#define GPCMD_READ_10			    0x28
-#define GPCMD_READ_12			    0xa8
-#define GPCMD_READ_BUFFER		    0x3c
-#define GPCMD_READ_BUFFER_CAPACITY	    0x5c
-#define GPCMD_READ_CDVD_CAPACITY	    0x25
-#define GPCMD_READ_CD			    0xbe
-#define GPCMD_READ_CD_MSF		    0xb9
-#define GPCMD_READ_DISC_INFO		    0x51
-#define GPCMD_READ_DVD_STRUCTURE	    0xad
-#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
-#define GPCMD_READ_HEADER		    0x44
-#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
-#define GPCMD_READ_SUBCHANNEL		    0x42
-#define GPCMD_READ_TOC_PMA_ATIP		    0x43
-#define GPCMD_REPAIR_RZONE_TRACK	    0x58
-#define GPCMD_REPORT_KEY		    0xa4
-#define GPCMD_REQUEST_SENSE		    0x03
-#define GPCMD_RESERVE_RZONE_TRACK	    0x53
-#define GPCMD_SEND_CUE_SHEET		    0x5d
-#define GPCMD_SCAN			    0xba
-#define GPCMD_SEEK			    0x2b
-#define GPCMD_SEND_DVD_STRUCTURE	    0xbf
-#define GPCMD_SEND_EVENT		    0xa2
-#define GPCMD_SEND_KEY			    0xa3
-#define GPCMD_SEND_OPC			    0x54
-#define GPCMD_SET_READ_AHEAD		    0xa7
-#define GPCMD_SET_STREAMING		    0xb6
-#define GPCMD_START_STOP_UNIT		    0x1b
-#define GPCMD_STOP_PLAY_SCAN		    0x4e
-#define GPCMD_TEST_UNIT_READY		    0x00
-#define GPCMD_VERIFY_10			    0x2f
-#define GPCMD_WRITE_10			    0x2a
-#define GPCMD_WRITE_12			    0xaa
-#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
-#define GPCMD_WRITE_BUFFER		    0x3b
-/* This is listed as optional in ATAPI 2.6, but is (curiously) 
- * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
- * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
- * drives support it. */
-#define GPCMD_SET_SPEED			    0xbb
-/* This seems to be a SCSI specific CD-ROM opcode 
- * to play data at track/index */
-#define GPCMD_PLAYAUDIO_TI		    0x48
-/*
- * From MS Media Status Notification Support Specification. For
- * older drives only.
- */
-#define GPCMD_GET_MEDIA_STATUS		    0xda
-
-/* Mode page codes for mode sense/set */
-#define GPMODE_VENDOR_PAGE		0x00
-#define GPMODE_R_W_ERROR_PAGE		0x01
-#define GPMODE_WRITE_PARMS_PAGE		0x05
-#define GPMODE_WCACHING_PAGE		0x08
-#define GPMODE_AUDIO_CTL_PAGE		0x0e
-#define GPMODE_POWER_PAGE		0x1a
-#define GPMODE_FAULT_FAIL_PAGE		0x1c
-#define GPMODE_TO_PROTECT_PAGE		0x1d
-#define GPMODE_CAPABILITIES_PAGE	0x2a
-#define GPMODE_ALL_PAGES		0x3f
-/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
- * of MODE_SENSE_POWER_PAGE */
-#define GPMODE_CDROM_PAGE		0x0d
-
-
-
-/* DVD struct types */
-#define DVD_STRUCT_PHYSICAL	0x00
-#define DVD_STRUCT_COPYRIGHT	0x01
-#define DVD_STRUCT_DISCKEY	0x02
-#define DVD_STRUCT_BCA		0x03
-#define DVD_STRUCT_MANUFACT	0x04
-
-struct dvd_layer {
-	__u8 book_version	: 4;
-	__u8 book_type		: 4;
-	__u8 min_rate		: 4;
-	__u8 disc_size		: 4;
-	__u8 layer_type		: 4;
-	__u8 track_path		: 1;
-	__u8 nlayers		: 2;
-	__u8 track_density	: 4;
-	__u8 linear_density	: 4;
-	__u8 bca		: 1;
-	__u32 start_sector;
-	__u32 end_sector;
-	__u32 end_sector_l0;
-};
-
-#define DVD_LAYERS	4
-
-struct dvd_physical {
-	__u8 type;
-	__u8 layer_num;
-	struct dvd_layer layer[DVD_LAYERS];
-};
-
-struct dvd_copyright {
-	__u8 type;
-
-	__u8 layer_num;
-	__u8 cpst;
-	__u8 rmi;
-};
-
-struct dvd_disckey {
-	__u8 type;
-
-	unsigned agid		: 2;
-	__u8 value[2048];
-};
-
-struct dvd_bca {
-	__u8 type;
-
-	int len;
-	__u8 value[188];
-};
-
-struct dvd_manufact {
-	__u8 type;
-
-	__u8 layer_num;
-	int len;
-	__u8 value[2048];
-};
-
-typedef union {
-	__u8 type;
-
-	struct dvd_physical	physical;
-	struct dvd_copyright	copyright;
-	struct dvd_disckey	disckey;
-	struct dvd_bca		bca;
-	struct dvd_manufact	manufact;
-} dvd_struct;
-
-/*
- * DVD authentication ioctl
- */
-
-/* Authentication states */
-#define DVD_LU_SEND_AGID	0
-#define DVD_HOST_SEND_CHALLENGE	1
-#define DVD_LU_SEND_KEY1	2
-#define DVD_LU_SEND_CHALLENGE	3
-#define DVD_HOST_SEND_KEY2	4
-
-/* Termination states */
-#define DVD_AUTH_ESTABLISHED	5
-#define DVD_AUTH_FAILURE	6
-
-/* Other functions */
-#define DVD_LU_SEND_TITLE_KEY	7
-#define DVD_LU_SEND_ASF		8
-#define DVD_INVALIDATE_AGID	9
-#define DVD_LU_SEND_RPC_STATE	10
-#define DVD_HOST_SEND_RPC_STATE	11
-
-/* State data */
-typedef __u8 dvd_key[5];		/* 40-bit value, MSB is first elem. */
-typedef __u8 dvd_challenge[10];	/* 80-bit value, MSB is first elem. */
-
-struct dvd_lu_send_agid {
-	__u8 type;
-	unsigned agid		: 2;
-};
-
-struct dvd_host_send_challenge {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_challenge chal;
-};
-
-struct dvd_send_key {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_key key;
-};
-
-struct dvd_lu_send_challenge {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_challenge chal;
-};
-
-#define DVD_CPM_NO_COPYRIGHT	0
-#define DVD_CPM_COPYRIGHTED	1
-
-#define DVD_CP_SEC_NONE		0
-#define DVD_CP_SEC_EXIST	1
-
-#define DVD_CGMS_UNRESTRICTED	0
-#define DVD_CGMS_SINGLE		2
-#define DVD_CGMS_RESTRICTED	3
-
-struct dvd_lu_send_title_key {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_key title_key;
-	int lba;
-	unsigned cpm		: 1;
-	unsigned cp_sec		: 1;
-	unsigned cgms		: 2;
-};
-
-struct dvd_lu_send_asf {
-	__u8 type;
-	unsigned agid		: 2;
-
-	unsigned asf		: 1;
-};
-
-struct dvd_host_send_rpcstate {
-	__u8 type;
-	__u8 pdrc;
-};
-
-struct dvd_lu_send_rpcstate {
-	__u8 type		: 2;
-	__u8 vra		: 3;
-	__u8 ucca		: 3;
-	__u8 region_mask;
-	__u8 rpc_scheme;
-};
-
-typedef union {
-	__u8 type;
-
-	struct dvd_lu_send_agid		lsa;
-	struct dvd_host_send_challenge	hsc;
-	struct dvd_send_key		lsk;
-	struct dvd_lu_send_challenge	lsc;
-	struct dvd_send_key		hsk;
-	struct dvd_lu_send_title_key	lstk;
-	struct dvd_lu_send_asf		lsasf;
-	struct dvd_host_send_rpcstate	hrpcs;
-	struct dvd_lu_send_rpcstate	lrpcs;
-} dvd_authinfo;
-
-struct request_sense {
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 valid		: 1;
-	__u8 error_code		: 7;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 error_code		: 7;
-	__u8 valid		: 1;
-#endif
-	__u8 segment_number;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 ili		: 1;
-	__u8 reserved2		: 1;
-	__u8 sense_key		: 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 sense_key		: 4;
-	__u8 reserved2		: 1;
-	__u8 ili		: 1;
-	__u8 reserved1		: 2;
-#endif
-	__u8 information[4];
-	__u8 add_sense_len;
-	__u8 command_info[4];
-	__u8 asc;
-	__u8 ascq;
-	__u8 fruc;
-	__u8 sks[3];
-	__u8 asb[46];
-};
-
-/*
- * feature profile
- */
-#define CDF_RWRT	0x0020	/* "Random Writable" */
-#define CDF_HWDM	0x0024	/* "Hardware Defect Management" */
-#define CDF_MRW 	0x0028
-
-/*
- * media status bits
- */
-#define CDM_MRW_NOTMRW			0
-#define CDM_MRW_BGFORMAT_INACTIVE	1
-#define CDM_MRW_BGFORMAT_ACTIVE		2
-#define CDM_MRW_BGFORMAT_COMPLETE	3
-
-/*
- * mrw address spaces
- */
-#define MRW_LBA_DMA			0
-#define MRW_LBA_GAA			1
-
-/*
- * mrw mode pages (first is deprecated) -- probed at init time and
- * cdi->mrw_mode_page is set
- */
-#define MRW_MODE_PC_PRE1		0x2c
-#define MRW_MODE_PC			0x03
-
-struct mrw_feature_desc {
-	__be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 feature_version	: 4;
-	__u8 persistent		: 1;
-	__u8 curr		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 curr		: 1;
-	__u8 persistent		: 1;
-	__u8 feature_version	: 4;
-	__u8 reserved1		: 2;
-#endif
-	__u8 add_len;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2		: 7;
-	__u8 write		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 write		: 1;
-	__u8 reserved2		: 7;
-#endif
-	__u8 reserved3;
-	__u8 reserved4;
-	__u8 reserved5;
-};
-
-/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
-struct rwrt_feature_desc {
-	__be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 feature_version	: 4;
-	__u8 persistent		: 1;
-	__u8 curr		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 curr		: 1;
-	__u8 persistent		: 1;
-	__u8 feature_version	: 4;
-	__u8 reserved1		: 2;
-#endif
-	__u8 add_len;
-	__u32 last_lba;
-	__u32 block_size;
-	__u16 blocking;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2		: 7;
-	__u8 page_present	: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 page_present	: 1;
-	__u8 reserved2		: 7;
-#endif
-	__u8 reserved3;
-};
-
-typedef struct {
-	__be16 disc_information_length;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1			: 3;
-        __u8 erasable			: 1;
-        __u8 border_status		: 2;
-        __u8 disc_status		: 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-        __u8 disc_status		: 2;
-        __u8 border_status		: 2;
-        __u8 erasable			: 1;
-	__u8 reserved1			: 3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	__u8 n_first_track;
-	__u8 n_sessions_lsb;
-	__u8 first_track_lsb;
-	__u8 last_track_lsb;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 did_v			: 1;
-        __u8 dbc_v			: 1;
-        __u8 uru			: 1;
-        __u8 reserved2			: 2;
-	__u8 dbit			: 1;
-	__u8 mrw_status			: 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 mrw_status			: 2;
-	__u8 dbit			: 1;
-        __u8 reserved2			: 2;
-        __u8 uru			: 1;
-        __u8 dbc_v			: 1;
-	__u8 did_v			: 1;
-#endif
-	__u8 disc_type;
-	__u8 n_sessions_msb;
-	__u8 first_track_msb;
-	__u8 last_track_msb;
-	__u32 disc_id;
-	__u32 lead_in;
-	__u32 lead_out;
-	__u8 disc_bar_code[8];
-	__u8 reserved3;
-	__u8 n_opc;
-} disc_information;
-
-typedef struct {
-	__be16 track_information_length;
-	__u8 track_lsb;
-	__u8 session_lsb;
-	__u8 reserved1;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2			: 2;
-        __u8 damage			: 1;
-        __u8 copy			: 1;
-        __u8 track_mode			: 4;
-	__u8 rt				: 1;
-	__u8 blank			: 1;
-	__u8 packet			: 1;
-	__u8 fp				: 1;
-	__u8 data_mode			: 4;
-	__u8 reserved3			: 6;
-	__u8 lra_v			: 1;
-	__u8 nwa_v			: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-        __u8 track_mode			: 4;
-        __u8 copy			: 1;
-        __u8 damage			: 1;
-	__u8 reserved2			: 2;
-	__u8 data_mode			: 4;
-	__u8 fp				: 1;
-	__u8 packet			: 1;
-	__u8 blank			: 1;
-	__u8 rt				: 1;
-	__u8 nwa_v			: 1;
-	__u8 lra_v			: 1;
-	__u8 reserved3			: 6;
-#endif
-	__be32 track_start;
-	__be32 next_writable;
-	__be32 free_blocks;
-	__be32 fixed_packet_size;
-	__be32 track_size;
-	__be32 last_rec_address;
-} track_information;
-
-struct feature_header {
-	__u32 data_len;
-	__u8 reserved1;
-	__u8 reserved2;
-	__u16 curr_profile;
-};
-
-struct mode_page_header {
-	__be16 mode_data_length;
-	__u8 medium_type;
-	__u8 reserved1;
-	__u8 reserved2;
-	__u8 reserved3;
-	__be16 desc_length;
-};
-
-#ifdef __KERNEL__
 #include <linux/fs.h>		/* not really needed, later.. */
 #include <linux/list.h>
+#include <uapi/linux/cdrom.h>
 
 struct packet_command
 {
@@ -1209,6 +311,4 @@ static inline int msf_to_lba(u8 m, u8 s, u8 f)
 {
 	return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
 }
-#endif  /* End of kernel only stuff */ 
-
 #endif  /* _LINUX_CDROM_H */
diff --git a/include/linux/cgroupstats.h b/include/linux/cgroupstats.h
deleted file mode 100644
index 3753c33160d1..000000000000
--- a/include/linux/cgroupstats.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* cgroupstats.h - exporting per-cgroup statistics
- *
- * Copyright IBM Corporation, 2007
- * Author Balbir Singh <balbir@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2.1 of the GNU Lesser General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _LINUX_CGROUPSTATS_H
-#define _LINUX_CGROUPSTATS_H
-
-#include <linux/types.h>
-#include <linux/taskstats.h>
-
-/*
- * Data shared between user space and kernel space on a per cgroup
- * basis. This data is shared using taskstats.
- *
- * Most of these states are derived by looking at the task->state value
- * For the nr_io_wait state, a flag in the delay accounting structure
- * indicates that the task is waiting on IO
- *
- * Each member is aligned to a 8 byte boundary.
- */
-struct cgroupstats {
-	__u64	nr_sleeping;		/* Number of tasks sleeping */
-	__u64	nr_running;		/* Number of tasks running */
-	__u64	nr_stopped;		/* Number of tasks in stopped state */
-	__u64	nr_uninterruptible;	/* Number of tasks in uninterruptible */
-					/* state */
-	__u64	nr_io_wait;		/* Number of tasks waiting on IO */
-};
-
-/*
- * Commands sent from userspace
- * Not versioned. New commands should only be inserted at the enum's end
- * prior to __CGROUPSTATS_CMD_MAX
- */
-
-enum {
-	CGROUPSTATS_CMD_UNSPEC = __TASKSTATS_CMD_MAX,	/* Reserved */
-	CGROUPSTATS_CMD_GET,		/* user->kernel request/get-response */
-	CGROUPSTATS_CMD_NEW,		/* kernel->user event */
-	__CGROUPSTATS_CMD_MAX,
-};
-
-#define CGROUPSTATS_CMD_MAX (__CGROUPSTATS_CMD_MAX - 1)
-
-enum {
-	CGROUPSTATS_TYPE_UNSPEC = 0,	/* Reserved */
-	CGROUPSTATS_TYPE_CGROUP_STATS,	/* contains name + stats */
-	__CGROUPSTATS_TYPE_MAX,
-};
-
-#define CGROUPSTATS_TYPE_MAX (__CGROUPSTATS_TYPE_MAX - 1)
-
-enum {
-	CGROUPSTATS_CMD_ATTR_UNSPEC = 0,
-	CGROUPSTATS_CMD_ATTR_FD,
-	__CGROUPSTATS_CMD_ATTR_MAX,
-};
-
-#define CGROUPSTATS_CMD_ATTR_MAX (__CGROUPSTATS_CMD_ATTR_MAX - 1)
-
-#endif /* _LINUX_CGROUPSTATS_H */
diff --git a/include/linux/chio.h b/include/linux/chio.h
deleted file mode 100644
index d9bac7f97282..000000000000
--- a/include/linux/chio.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * ioctl interface for the scsi media changer driver
- */
-
-/* changer element types */
-#define CHET_MT   0	/* media transport element (robot) */
-#define CHET_ST   1	/* storage element (media slots) */
-#define CHET_IE   2	/* import/export element */
-#define CHET_DT   3	/* data transfer element (tape/cdrom/whatever) */
-#define CHET_V1   4	/* vendor specific #1 */
-#define CHET_V2   5	/* vendor specific #2 */
-#define CHET_V3   6	/* vendor specific #3 */
-#define CHET_V4   7	/* vendor specific #4 */
-
-
-/*
- * CHIOGPARAMS
- *    query changer properties
- *
- * CHIOVGPARAMS
- *    query vendor-specific element types
- *
- *    accessing elements works by specifing type and unit of the element.
- *    for example, storage elements are addressed with type = CHET_ST and
- *    unit = 0 .. cp_nslots-1
- *
- */
-struct changer_params {
-	int cp_curpicker;  /* current transport element */
-	int cp_npickers;   /* number of transport elements      (CHET_MT) */
-	int cp_nslots;     /* number of storage elements        (CHET_ST) */
-	int cp_nportals;   /* number of import/export elements  (CHET_IE) */
-	int cp_ndrives;    /* number of data transfer elements  (CHET_DT) */
-};
-struct changer_vendor_params {
-	int  cvp_n1;       /* number of vendor specific elems   (CHET_V1) */
-	char cvp_label1[16];
-	int  cvp_n2;       /* number of vendor specific elems   (CHET_V2) */
-	char cvp_label2[16];
-	int  cvp_n3;       /* number of vendor specific elems   (CHET_V3) */
-	char cvp_label3[16];
-	int  cvp_n4;       /* number of vendor specific elems   (CHET_V4) */
-	char cvp_label4[16];
-	int  reserved[8];
-};
-
-
-/*
- * CHIOMOVE
- *    move a medium from one element to another
- */
-struct changer_move {
-	int cm_fromtype;	/* type/unit of source element */
-	int cm_fromunit;	
-	int cm_totype;	/* type/unit of destination element */
-	int cm_tounit;
-	int cm_flags;
-};
-#define CM_INVERT   1   /* flag: rotate media (for double-sided like MOD) */
-
-
-/*
- * CHIOEXCHANGE
- *    move one medium from element #1 to element #2,
- *    and another one from element #2 to element #3.
- *    element #1 and #3 are allowed to be identical.
- */
-struct changer_exchange {
-	int ce_srctype;	    /* type/unit of element #1 */
-	int ce_srcunit;
-	int ce_fdsttype;    /* type/unit of element #2 */
-	int ce_fdstunit;
-	int ce_sdsttype;    /* type/unit of element #3 */
-	int ce_sdstunit;
-	int ce_flags;
-};
-#define CE_INVERT1   1
-#define CE_INVERT2   2
-
-
-/*
- * CHIOPOSITION
- *    move the transport element (robot arm) to a specific element.
- */
-struct changer_position {
-	int cp_type;
-	int cp_unit;
-	int cp_flags;
-};
-#define CP_INVERT   1
-
-
-/*
- * CHIOGSTATUS
- *    get element status for all elements of a specific type
- */
-struct changer_element_status {
-	int             ces_type;
-	unsigned char   __user *ces_data;
-};
-#define CESTATUS_FULL     0x01 /* full */
-#define CESTATUS_IMPEXP   0x02	/* media was imported (inserted by sysop) */
-#define CESTATUS_EXCEPT   0x04	/* error condition */
-#define CESTATUS_ACCESS   0x08	/* access allowed */
-#define CESTATUS_EXENAB   0x10	/* element can export media */
-#define CESTATUS_INENAB   0x20	/* element can import media */
-
-
-/*
- * CHIOGELEM
- *    get more detailed status information for a single element
- */
-struct changer_get_element {
-	int	cge_type;	 /* type/unit */
-	int	cge_unit;
-	int	cge_status;      /* status */
-	int     cge_errno;       /* errno */
-	int     cge_srctype;     /* source element of the last move/exchange */
-	int     cge_srcunit;
-	int     cge_id;          /* scsi id  (for data transfer elements) */
-	int     cge_lun;         /* scsi lun (for data transfer elements) */
-	char    cge_pvoltag[36]; /* primary volume tag */
-	char    cge_avoltag[36]; /* alternate volume tag */
-	int     cge_flags;
-};
-/* flags */
-#define CGE_ERRNO     0x01       /* errno available       */
-#define CGE_INVERT    0x02       /* media inverted        */
-#define CGE_SRC       0x04       /* media src available   */
-#define CGE_IDLUN     0x08       /* ID+LUN available      */
-#define CGE_PVOLTAG   0x10       /* primary volume tag available */
-#define CGE_AVOLTAG   0x20       /* alternate volume tag available */
-
-
-/*
- * CHIOSVOLTAG
- *    set volume tag
- */
-struct changer_set_voltag {
-	int	csv_type;	 /* type/unit */
-	int	csv_unit;
-	char    csv_voltag[36];  /* volume tag */
-	int     csv_flags;
-};
-#define CSV_PVOLTAG   0x01       /* primary volume tag */
-#define CSV_AVOLTAG   0x02       /* alternate volume tag */
-#define CSV_CLEARTAG  0x04       /* clear volume tag */
-
-/* ioctls */
-#define CHIOMOVE       _IOW('c', 1,struct changer_move)
-#define CHIOEXCHANGE   _IOW('c', 2,struct changer_exchange)
-#define CHIOPOSITION   _IOW('c', 3,struct changer_position)
-#define CHIOGPICKER    _IOR('c', 4,int)                        /* not impl. */
-#define CHIOSPICKER    _IOW('c', 5,int)                        /* not impl. */
-#define CHIOGPARAMS    _IOR('c', 6,struct changer_params)
-#define CHIOGSTATUS    _IOW('c', 8,struct changer_element_status)
-#define CHIOGELEM      _IOW('c',16,struct changer_get_element)
-#define CHIOINITELEM   _IO('c',17)
-#define CHIOSVOLTAG    _IOW('c',18,struct changer_set_voltag)
-#define CHIOGVPARAMS   _IOR('c',19,struct changer_vendor_params)
-
-/* ---------------------------------------------------------------------- */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h
index 3c4aac406175..88bee3a33090 100644
--- a/include/linux/cm4000_cs.h
+++ b/include/linux/cm4000_cs.h
@@ -1,68 +1,10 @@
 #ifndef	_CM4000_H_
 #define	_CM4000_H_
 
-#include <linux/types.h>
+#include <uapi/linux/cm4000_cs.h>
 
-#define	MAX_ATR			33
-
-#define	CM4000_MAX_DEV		4
-
-/* those two structures are passed via ioctl() from/to userspace.  They are
- * used by existing userspace programs, so I kepth the awkward "bIFSD" naming
- * not to break compilation of userspace apps. -HW */
-
-typedef struct atreq {
-	__s32 atr_len;
-	unsigned char atr[64];
-	__s32 power_act;
-	unsigned char bIFSD;
-	unsigned char bIFSC;
-} atreq_t;
-
-
-/* what is particularly stupid in the original driver is the arch-dependent
- * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
- * will lay out the structure members differently than the 64bit kernel.
- *
- * I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
- * On 32bit this will make no difference.  With 64bit kernels, it will make
- * 32bit apps work, too.
- */
-
-typedef struct ptsreq {
-	__u32 protocol; /*T=0: 2^0, T=1:  2^1*/
- 	unsigned char flags;
- 	unsigned char pts1;
- 	unsigned char pts2;
-	unsigned char pts3;
-} ptsreq_t;
-
-#define	CM_IOC_MAGIC		'c'
-#define	CM_IOC_MAXNR	        255
-
-#define	CM_IOCGSTATUS		_IOR (CM_IOC_MAGIC, 0, unsigned char *)
-#define	CM_IOCGATR		_IOWR(CM_IOC_MAGIC, 1, atreq_t *)
-#define	CM_IOCSPTS		_IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
-#define	CM_IOCSRDR		_IO  (CM_IOC_MAGIC, 3)
-#define CM_IOCARDOFF            _IO  (CM_IOC_MAGIC, 4)
-
-#define CM_IOSDBGLVL            _IOW(CM_IOC_MAGIC, 250, int*)
-
-/* card and device states */
-#define	CM_CARD_INSERTED		0x01
-#define	CM_CARD_POWERED			0x02
-#define	CM_ATR_PRESENT			0x04
-#define	CM_ATR_VALID	 		0x08
-#define	CM_STATE_VALID			0x0f
-/* extra info only from CM4000 */
-#define	CM_NO_READER			0x10
-#define	CM_BAD_CARD			0x20
-
-
-#ifdef __KERNEL__
 
 #define	DEVICE_NAME		"cmm"
 #define	MODULE_NAME		"cm4000_cs"
 
-#endif	/* __KERNEL__ */
 #endif	/* _CM4000_H_ */
diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h
index d03612b196e1..2c1bc1ea04ee 100644
--- a/include/linux/cn_proc.h
+++ b/include/linux/cn_proc.h
@@ -14,111 +14,11 @@
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  */
-
 #ifndef CN_PROC_H
 #define CN_PROC_H
 
-#include <linux/types.h>
-
-/*
- * Userspace sends this enum to register with the kernel that it is listening
- * for events on the connector.
- */
-enum proc_cn_mcast_op {
-	PROC_CN_MCAST_LISTEN = 1,
-	PROC_CN_MCAST_IGNORE = 2
-};
-
-/*
- * From the user's point of view, the process
- * ID is the thread group ID and thread ID is the internal
- * kernel "pid". So, fields are assigned as follow:
- *
- *  In user space     -  In  kernel space
- *
- * parent process ID  =  parent->tgid
- * parent thread  ID  =  parent->pid
- * child  process ID  =  child->tgid
- * child  thread  ID  =  child->pid
- */
-
-struct proc_event {
-	enum what {
-		/* Use successive bits so the enums can be used to record
-		 * sets of events as well
-		 */
-		PROC_EVENT_NONE = 0x00000000,
-		PROC_EVENT_FORK = 0x00000001,
-		PROC_EVENT_EXEC = 0x00000002,
-		PROC_EVENT_UID  = 0x00000004,
-		PROC_EVENT_GID  = 0x00000040,
-		PROC_EVENT_SID  = 0x00000080,
-		PROC_EVENT_PTRACE = 0x00000100,
-		PROC_EVENT_COMM = 0x00000200,
-		/* "next" should be 0x00000400 */
-		/* "last" is the last process event: exit */
-		PROC_EVENT_EXIT = 0x80000000
-	} what;
-	__u32 cpu;
-	__u64 __attribute__((aligned(8))) timestamp_ns;
-		/* Number of nano seconds since system boot */
-	union { /* must be last field of proc_event struct */
-		struct {
-			__u32 err;
-		} ack;
-
-		struct fork_proc_event {
-			__kernel_pid_t parent_pid;
-			__kernel_pid_t parent_tgid;
-			__kernel_pid_t child_pid;
-			__kernel_pid_t child_tgid;
-		} fork;
-
-		struct exec_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-		} exec;
-
-		struct id_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			union {
-				__u32 ruid; /* task uid */
-				__u32 rgid; /* task gid */
-			} r;
-			union {
-				__u32 euid;
-				__u32 egid;
-			} e;
-		} id;
-
-		struct sid_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-		} sid;
-
-		struct ptrace_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			__kernel_pid_t tracer_pid;
-			__kernel_pid_t tracer_tgid;
-		} ptrace;
-
-		struct comm_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			char           comm[16];
-		} comm;
-
-		struct exit_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			__u32 exit_code, exit_signal;
-		} exit;
-	} event_data;
-};
+#include <uapi/linux/cn_proc.h>
 
-#ifdef __KERNEL__
 #ifdef CONFIG_PROC_EVENTS
 void proc_fork_connector(struct task_struct *task);
 void proc_exec_connector(struct task_struct *task);
@@ -151,5 +51,4 @@ static inline void proc_ptrace_connector(struct task_struct *task,
 static inline void proc_exit_connector(struct task_struct *task)
 {}
 #endif	/* CONFIG_PROC_EVENTS */
-#endif	/* __KERNEL__ */
 #endif	/* CN_PROC_H */
diff --git a/include/linux/coda.h b/include/linux/coda.h
index 96c87693800b..cff544f81105 100644
--- a/include/linux/coda.h
+++ b/include/linux/coda.h
@@ -55,690 +55,12 @@ Mellon the rights to redistribute these changes without encumbrance.
  * Linux modifications by 
  * Peter Braam, Aug 1996
  */
-
 #ifndef _CODA_HEADER_
 #define _CODA_HEADER_
 
-
-/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
-#if defined(__NetBSD__) || \
-  ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
-#include <sys/types.h>
-#endif 
-
-#ifndef CODA_MAXSYMLINKS
-#define CODA_MAXSYMLINKS 10
-#endif
-
-#if defined(DJGPP) || defined(__CYGWIN32__)
-#ifdef KERNEL
-typedef unsigned long u_long;
-typedef unsigned int u_int;
-typedef unsigned short u_short;
-typedef u_long ino_t;
-typedef u_long dev_t;
-typedef void * caddr_t;
-#ifdef DOS
-typedef unsigned __int64 u_quad_t;
-#else 
-typedef unsigned long long u_quad_t;
-#endif
-
-#define inline
-
-struct timespec {
-        long       ts_sec;
-        long       ts_nsec;
-};
-#else  /* DJGPP but not KERNEL */
-#include <sys/time.h>
-typedef unsigned long long u_quad_t;
-#endif /* !KERNEL */
-#endif /* !DJGPP */
-
-
 #if defined(__linux__)
-#include <linux/time.h>
-#define cdev_t u_quad_t
-#ifndef __KERNEL__
-#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
-#define _UQUAD_T_ 1
 typedef unsigned long long u_quad_t;
-#endif
-#else /*__KERNEL__ */
-typedef unsigned long long u_quad_t;
-#endif /* __KERNEL__ */
 #else
-#define cdev_t dev_t
-#endif
-
-#ifdef __CYGWIN32__
-struct timespec {
-        time_t  tv_sec;         /* seconds */
-        long    tv_nsec;        /* nanoseconds */
-};
-#endif
-
-#ifndef __BIT_TYPES_DEFINED__
-#define __BIT_TYPES_DEFINED__
-typedef signed char	      int8_t;
-typedef unsigned char	    u_int8_t;
-typedef short		     int16_t;
-typedef unsigned short	   u_int16_t;
-typedef int		     int32_t;
-typedef unsigned int	   u_int32_t;
-#endif
-
-
-/*
- * Cfs constants
- */
-#define CODA_MAXNAMLEN   255
-#define CODA_MAXPATHLEN  1024
-#define CODA_MAXSYMLINK  10
-
-/* these are Coda's version of O_RDONLY etc combinations
- * to deal with VFS open modes
- */
-#define	C_O_READ	0x001
-#define	C_O_WRITE       0x002
-#define C_O_TRUNC       0x010
-#define C_O_EXCL	0x100
-#define C_O_CREAT	0x200
-
-/* these are to find mode bits in Venus */ 
-#define C_M_READ  00400
-#define C_M_WRITE 00200
-
-/* for access Venus will use */
-#define C_A_C_OK    8               /* Test for writing upon create.  */
-#define C_A_R_OK    4               /* Test for read permission.  */
-#define C_A_W_OK    2               /* Test for write permission.  */
-#define C_A_X_OK    1               /* Test for execute permission.  */
-#define C_A_F_OK    0               /* Test for existence.  */
-
-
-
-#ifndef _VENUS_DIRENT_T_
-#define _VENUS_DIRENT_T_ 1
-struct venus_dirent {
-        u_int32_t d_fileno;		/* file number of entry */
-        u_int16_t d_reclen;		/* length of this record */
-        u_int8_t  d_type;			/* file type, see below */
-        u_int8_t  d_namlen;		/* length of string in d_name */
-        char	  d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
-};
-#undef DIRSIZ
-#define DIRSIZ(dp)      ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
-                         (((dp)->d_namlen+1 + 3) &~ 3))
-
-/*
- * File types
- */
-#define	CDT_UNKNOWN	 0
-#define	CDT_FIFO	 1
-#define	CDT_CHR		 2
-#define	CDT_DIR		 4
-#define	CDT_BLK		 6
-#define	CDT_REG		 8
-#define	CDT_LNK		10
-#define	CDT_SOCK	12
-#define	CDT_WHT		14
-
-/*
- * Convert between stat structure types and directory types.
- */
-#define	IFTOCDT(mode)	(((mode) & 0170000) >> 12)
-#define	CDTTOIF(dirtype)	((dirtype) << 12)
-
 #endif
-
-#ifndef _VUID_T_
-#define _VUID_T_
-typedef u_int32_t vuid_t;
-typedef u_int32_t vgid_t;
-#endif /*_VUID_T_ */
-
-struct CodaFid {
-	u_int32_t opaque[4];
-};
-
-#define coda_f2i(fid)\
-	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
-
-#ifndef _VENUS_VATTR_T_
-#define _VENUS_VATTR_T_
-/*
- * Vnode types.  VNON means no type.
- */
-enum coda_vtype	{ C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
-
-struct coda_vattr {
-	long     	va_type;	/* vnode type (for create) */
-	u_short		va_mode;	/* files access mode and type */
-	short		va_nlink;	/* number of references to file */
-	vuid_t		va_uid;		/* owner user id */
-	vgid_t		va_gid;		/* owner group id */
-	long		va_fileid;	/* file id */
-	u_quad_t	va_size;	/* file size in bytes */
-	long		va_blocksize;	/* blocksize preferred for i/o */
-	struct timespec	va_atime;	/* time of last access */
-	struct timespec	va_mtime;	/* time of last modification */
-	struct timespec	va_ctime;	/* time file changed */
-	u_long		va_gen;		/* generation number of file */
-	u_long		va_flags;	/* flags defined for file */
-	cdev_t	        va_rdev;	/* device special file represents */
-	u_quad_t	va_bytes;	/* bytes of disk space held by file */
-	u_quad_t	va_filerev;	/* file modification number */
-};
-
+#include <uapi/linux/coda.h>
 #endif 
-
-/* structure used by CODA_STATFS for getting cache information from venus */
-struct coda_statfs {
-    int32_t f_blocks;
-    int32_t f_bfree;
-    int32_t f_bavail;
-    int32_t f_files;
-    int32_t f_ffree;
-};
-
-/*
- * Kernel <--> Venus communications.
- */
-
-#define CODA_ROOT	2
-#define CODA_OPEN_BY_FD	3
-#define CODA_OPEN	4
-#define CODA_CLOSE	5
-#define CODA_IOCTL	6
-#define CODA_GETATTR	7
-#define CODA_SETATTR	8
-#define CODA_ACCESS	9
-#define CODA_LOOKUP	10
-#define CODA_CREATE	11
-#define CODA_REMOVE	12
-#define CODA_LINK	13
-#define CODA_RENAME	14
-#define CODA_MKDIR	15
-#define CODA_RMDIR	16
-#define CODA_SYMLINK	18
-#define CODA_READLINK	19
-#define CODA_FSYNC	20
-#define CODA_VGET	22
-#define CODA_SIGNAL	23
-#define CODA_REPLACE	 24 /* DOWNCALL */
-#define CODA_FLUSH       25 /* DOWNCALL */
-#define CODA_PURGEUSER   26 /* DOWNCALL */
-#define CODA_ZAPFILE     27 /* DOWNCALL */
-#define CODA_ZAPDIR      28 /* DOWNCALL */
-#define CODA_PURGEFID    30 /* DOWNCALL */
-#define CODA_OPEN_BY_PATH 31
-#define CODA_RESOLVE     32
-#define CODA_REINTEGRATE 33
-#define CODA_STATFS	 34
-#define CODA_STORE	 35
-#define CODA_RELEASE	 36
-#define CODA_NCALLS 37
-
-#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
-
-#define VC_MAXDATASIZE	    8192
-#define VC_MAXMSGSIZE      sizeof(union inputArgs)+sizeof(union outputArgs) +\
-                            VC_MAXDATASIZE  
-
-#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
-
-#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
-
-/*
- *        Venus <-> Coda  RPC arguments
- */
-struct coda_in_hdr {
-    u_int32_t opcode;
-    u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
-    pid_t pid;
-    pid_t pgid;
-    vuid_t uid;
-};
-
-/* Really important that opcode and unique are 1st two fields! */
-struct coda_out_hdr {
-    u_int32_t opcode;
-    u_int32_t unique;	
-    u_int32_t result;
-};
-
-/* coda_root: NO_IN */
-struct coda_root_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-};
-
-struct coda_root_in {
-    struct coda_in_hdr in;
-};
-
-/* coda_open: */
-struct coda_open_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_open_out {
-    struct coda_out_hdr oh;
-    cdev_t	dev;
-    ino_t	inode;
-};
-
-
-/* coda_store: */
-struct coda_store_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_store_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_release: */
-struct coda_release_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_release_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_close: */
-struct coda_close_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_close_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_ioctl: */
-struct coda_ioctl_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	cmd;
-    int	len;
-    int	rwflag;
-    char *data;			/* Place holder for data. */
-};
-
-struct coda_ioctl_out {
-    struct coda_out_hdr oh;
-    int	len;
-    caddr_t	data;		/* Place holder for data. */
-};
-
-
-/* coda_getattr: */
-struct coda_getattr_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_getattr_out {
-    struct coda_out_hdr oh;
-    struct coda_vattr attr;
-};
-
-
-/* coda_setattr: NO_OUT */
-struct coda_setattr_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-struct coda_setattr_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_access: NO_OUT */
-struct coda_access_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_access_out {
-    struct coda_out_hdr out;
-};
-
-
-/* lookup flags */
-#define CLU_CASE_SENSITIVE     0x01
-#define CLU_CASE_INSENSITIVE   0x02
-
-/* coda_lookup: */
-struct  coda_lookup_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int         name;		/* Place holder for data. */
-    int         flags;	
-};
-
-struct coda_lookup_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    int	vtype;
-};
-
-
-/* coda_create: */
-struct coda_create_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-    int excl;
-    int mode;
-    int 	name;		/* Place holder for data. */
-};
-
-struct coda_create_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-
-/* coda_remove: NO_OUT */
-struct coda_remove_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int name;		/* Place holder for data. */
-};
-
-struct coda_remove_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_link: NO_OUT */
-struct coda_link_in {
-    struct coda_in_hdr ih;
-    struct CodaFid sourceFid;	/* cnode to link *to* */
-    struct CodaFid destFid;	/* Directory in which to place link */
-    int tname;		/* Place holder for data. */
-};
-
-struct coda_link_out {
-    struct coda_out_hdr out;
-};
-
-
-/* coda_rename: NO_OUT */
-struct coda_rename_in {
-    struct coda_in_hdr ih;
-    struct CodaFid sourceFid;
-    int 	srcname;
-    struct CodaFid destFid;
-    int 	destname;
-};
-
-struct coda_rename_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_mkdir: */
-struct coda_mkdir_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-    int	   name;		/* Place holder for data. */
-};
-
-struct coda_mkdir_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-
-/* coda_rmdir: NO_OUT */
-struct coda_rmdir_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int name;		/* Place holder for data. */
-};
-
-struct coda_rmdir_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_symlink: NO_OUT */
-struct coda_symlink_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;	/* Directory to put symlink in */
-    int srcname;
-    struct coda_vattr attr;
-    int tname;
-};
-
-struct coda_symlink_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_readlink: */
-struct coda_readlink_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_readlink_out {
-    struct coda_out_hdr oh;
-    int	count;
-    caddr_t	data;		/* Place holder for data. */
-};
-
-
-/* coda_fsync: NO_OUT */
-struct coda_fsync_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_fsync_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_vget: */
-struct coda_vget_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_vget_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    int	vtype;
-};
-
-
-/* CODA_SIGNAL is out-of-band, doesn't need data. */
-/* CODA_INVALIDATE is a venus->kernel call */
-/* CODA_FLUSH is a venus->kernel call */
-
-/* coda_purgeuser: */
-/* CODA_PURGEUSER is a venus->kernel call */
-struct coda_purgeuser_out {
-    struct coda_out_hdr oh;
-    vuid_t uid;
-};
-
-/* coda_zapfile: */
-/* CODA_ZAPFILE is a venus->kernel call */
-struct coda_zapfile_out {  
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_zapdir: */
-/* CODA_ZAPDIR is a venus->kernel call */	
-struct coda_zapdir_out {	  
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_purgefid: */
-/* CODA_PURGEFID is a venus->kernel call */	
-struct coda_purgefid_out { 
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_replace: */
-/* CODA_REPLACE is a venus->kernel call */	
-struct coda_replace_out { /* coda_replace is a venus->kernel call */
-    struct coda_out_hdr oh;
-    struct CodaFid NewFid;
-    struct CodaFid OldFid;
-};
-
-/* coda_open_by_fd: */
-struct coda_open_by_fd_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int        flags;
-};
-
-struct coda_open_by_fd_out {
-    struct coda_out_hdr oh;
-    int fd;
-
-#ifdef __KERNEL__
-    struct file *fh; /* not passed from userspace but used in-kernel only */
-#endif
-};
-
-/* coda_open_by_path: */
-struct coda_open_by_path_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_open_by_path_out {
-    struct coda_out_hdr oh;
-	int path;
-};
-
-/* coda_statfs: NO_IN */
-struct coda_statfs_in {
-    struct coda_in_hdr in;
-};
-
-struct coda_statfs_out {
-    struct coda_out_hdr oh;
-    struct coda_statfs stat;
-};
-
-/* 
- * Occasionally, we don't cache the fid returned by CODA_LOOKUP. 
- * For instance, if the fid is inconsistent. 
- * This case is handled by setting the top bit of the type result parameter.
- */
-#define CODA_NOCACHE          0x80000000
-
-union inputArgs {
-    struct coda_in_hdr ih;		/* NB: every struct below begins with an ih */
-    struct coda_open_in coda_open;
-    struct coda_store_in coda_store;
-    struct coda_release_in coda_release;
-    struct coda_close_in coda_close;
-    struct coda_ioctl_in coda_ioctl;
-    struct coda_getattr_in coda_getattr;
-    struct coda_setattr_in coda_setattr;
-    struct coda_access_in coda_access;
-    struct coda_lookup_in coda_lookup;
-    struct coda_create_in coda_create;
-    struct coda_remove_in coda_remove;
-    struct coda_link_in coda_link;
-    struct coda_rename_in coda_rename;
-    struct coda_mkdir_in coda_mkdir;
-    struct coda_rmdir_in coda_rmdir;
-    struct coda_symlink_in coda_symlink;
-    struct coda_readlink_in coda_readlink;
-    struct coda_fsync_in coda_fsync;
-    struct coda_vget_in coda_vget;
-    struct coda_open_by_fd_in coda_open_by_fd;
-    struct coda_open_by_path_in coda_open_by_path;
-    struct coda_statfs_in coda_statfs;
-};
-
-union outputArgs {
-    struct coda_out_hdr oh;		/* NB: every struct below begins with an oh */
-    struct coda_root_out coda_root;
-    struct coda_open_out coda_open;
-    struct coda_ioctl_out coda_ioctl;
-    struct coda_getattr_out coda_getattr;
-    struct coda_lookup_out coda_lookup;
-    struct coda_create_out coda_create;
-    struct coda_mkdir_out coda_mkdir;
-    struct coda_readlink_out coda_readlink;
-    struct coda_vget_out coda_vget;
-    struct coda_purgeuser_out coda_purgeuser;
-    struct coda_zapfile_out coda_zapfile;
-    struct coda_zapdir_out coda_zapdir;
-    struct coda_purgefid_out coda_purgefid;
-    struct coda_replace_out coda_replace;
-    struct coda_open_by_fd_out coda_open_by_fd;
-    struct coda_open_by_path_out coda_open_by_path;
-    struct coda_statfs_out coda_statfs;
-};    
-
-union coda_downcalls {
-    /* CODA_INVALIDATE is a venus->kernel call */
-    /* CODA_FLUSH is a venus->kernel call */
-    struct coda_purgeuser_out purgeuser;
-    struct coda_zapfile_out zapfile;
-    struct coda_zapdir_out zapdir;
-    struct coda_purgefid_out purgefid;
-    struct coda_replace_out replace;
-};
-
-
-/*
- * Used for identifying usage of "Control" and pioctls
- */
-
-#define PIOCPARM_MASK 0x0000ffff
-struct ViceIoctl {
-        void __user *in;        /* Data to be transferred in */
-        void __user *out;       /* Data to be transferred out */
-        u_short in_size;        /* Size of input buffer <= 2K */
-        u_short out_size;       /* Maximum size of output buffer, <= 2K */
-};
-
-struct PioctlData {
-        const char __user *path;
-        int follow;
-        struct ViceIoctl vi;
-};
-
-#define CODA_CONTROL		".CONTROL"
-#define CODA_CONTROLLEN		8
-#define CTL_INO			-1
-
-/* Data passed to mount */
-
-#define CODA_MOUNT_VERSION 1
-
-struct coda_mount_data {
-	int		version;
-	int		fd;       /* Opened device */
-};
-
-#endif 
-
diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h
index 72f2d2f0af91..8031d6eef102 100644
--- a/include/linux/coda_psdev.h
+++ b/include/linux/coda_psdev.h
@@ -1,14 +1,9 @@
 #ifndef __CODA_PSDEV_H
 #define __CODA_PSDEV_H
 
-#include <linux/magic.h>
-
-#define CODA_PSDEV_MAJOR 67
-#define MAX_CODADEVS  5	   /* how many do we allow */
-
-#ifdef __KERNEL__
 #include <linux/backing-dev.h>
 #include <linux/mutex.h>
+#include <uapi/linux/coda_psdev.h>
 
 struct kstatfs;
 
@@ -74,23 +69,4 @@ int venus_statfs(struct dentry *dentry, struct kstatfs *sfs);
  */
 
 extern struct venus_comm coda_comms[];
-#endif /* __KERNEL__ */
-
-/* messages between coda filesystem in kernel and Venus */
-struct upc_req {
-	struct list_head    uc_chain;
-	caddr_t	            uc_data;
-	u_short	            uc_flags;
-	u_short             uc_inSize;  /* Size is at most 5000 bytes */
-	u_short	            uc_outSize;
-	u_short	            uc_opcode;  /* copied from data to save lookup */
-	int		    uc_unique;
-	wait_queue_head_t   uc_sleep;   /* process' wait queue */
-};
-
-#define CODA_REQ_ASYNC  0x1
-#define CODA_REQ_READ   0x2
-#define CODA_REQ_WRITE  0x4
-#define CODA_REQ_ABORT  0x8
-
 #endif
diff --git a/include/linux/coff.h b/include/linux/coff.h
deleted file mode 100644
index 6354a7fe22b2..000000000000
--- a/include/linux/coff.h
+++ /dev/null
@@ -1,351 +0,0 @@
-/* This file is derived from the GAS 2.1.4 assembler control file.
-   The GAS product is under the GNU General Public License, version 2 or later.
-   As such, this file is also under that license.
-
-   If the file format changes in the COFF object, this file should be
-   subsequently updated to reflect the changes.
-
-   The actual loader module only uses a few of these structures. The full
-   set is documented here because I received the full set. If you wish
-   more information about COFF, then O'Reilly has a very excellent book.
-*/
-
-#define  E_SYMNMLEN  8   /* Number of characters in a symbol name         */
-#define  E_FILNMLEN 14   /* Number of characters in a file name           */
-#define  E_DIMNUM    4   /* Number of array dimensions in auxiliary entry */
-
-/*
- * These defines are byte order independent. There is no alignment of fields
- * permitted in the structures. Therefore they are declared as characters
- * and the values loaded from the character positions. It also makes it
- * nice to have it "endian" independent.
- */
- 
-/* Load a short int from the following tables with little-endian formats */
-#define COFF_SHORT_L(ps) ((short)(((unsigned short)((unsigned char)ps[1])<<8)|\
-				  ((unsigned short)((unsigned char)ps[0]))))
-
-/* Load a long int from the following tables with little-endian formats */
-#define COFF_LONG_L(ps) (((long)(((unsigned long)((unsigned char)ps[3])<<24) |\
-				 ((unsigned long)((unsigned char)ps[2])<<16) |\
-				 ((unsigned long)((unsigned char)ps[1])<<8)  |\
-				 ((unsigned long)((unsigned char)ps[0])))))
- 
-/* Load a short int from the following tables with big-endian formats */
-#define COFF_SHORT_H(ps) ((short)(((unsigned short)((unsigned char)ps[0])<<8)|\
-				  ((unsigned short)((unsigned char)ps[1]))))
-
-/* Load a long int from the following tables with big-endian formats */
-#define COFF_LONG_H(ps) (((long)(((unsigned long)((unsigned char)ps[0])<<24) |\
-				 ((unsigned long)((unsigned char)ps[1])<<16) |\
-				 ((unsigned long)((unsigned char)ps[2])<<8)  |\
-				 ((unsigned long)((unsigned char)ps[3])))))
-
-/* These may be overridden later by brain dead implementations which generate
-   a big-endian header with little-endian data. In that case, generate a
-   replacement macro which tests a flag and uses either of the two above
-   as appropriate. */
-
-#define COFF_LONG(v)   COFF_LONG_L(v)
-#define COFF_SHORT(v)  COFF_SHORT_L(v)
-
-/*** coff information for Intel 386/486.  */
-
-/********************** FILE HEADER **********************/
-
-struct COFF_filehdr {
-	char f_magic[2];	/* magic number			*/
-	char f_nscns[2];	/* number of sections		*/
-	char f_timdat[4];	/* time & date stamp		*/
-	char f_symptr[4];	/* file pointer to symtab	*/
-	char f_nsyms[4];	/* number of symtab entries	*/
-	char f_opthdr[2];	/* sizeof(optional hdr)		*/
-	char f_flags[2];	/* flags			*/
-};
-
-/*
- *   Bits for f_flags:
- *
- *	F_RELFLG	relocation info stripped from file
- *	F_EXEC		file is executable  (i.e. no unresolved external
- *			references)
- *	F_LNNO		line numbers stripped from file
- *	F_LSYMS		local symbols stripped from file
- *	F_MINMAL	this is a minimal object file (".m") output of fextract
- *	F_UPDATE	this is a fully bound update file, output of ogen
- *	F_SWABD		this file has had its bytes swabbed (in names)
- *	F_AR16WR	this file has the byte ordering of an AR16WR
- *			(e.g. 11/70) machine
- *	F_AR32WR	this file has the byte ordering of an AR32WR machine
- *			(e.g. vax and iNTEL 386)
- *	F_AR32W		this file has the byte ordering of an AR32W machine
- *			(e.g. 3b,maxi)
- *	F_PATCH		file contains "patch" list in optional header
- *	F_NODF		(minimal file only) no decision functions for
- *			replaced functions
- */
-
-#define  COFF_F_RELFLG		0000001
-#define  COFF_F_EXEC		0000002
-#define  COFF_F_LNNO		0000004
-#define  COFF_F_LSYMS		0000010
-#define  COFF_F_MINMAL		0000020
-#define  COFF_F_UPDATE		0000040
-#define  COFF_F_SWABD		0000100
-#define  COFF_F_AR16WR		0000200
-#define  COFF_F_AR32WR		0000400
-#define  COFF_F_AR32W		0001000
-#define  COFF_F_PATCH		0002000
-#define  COFF_F_NODF		0002000
-
-#define	COFF_I386MAGIC	        0x14c   /* Linux's system    */
-
-#if 0   /* Perhaps, someday, these formats may be used.      */
-#define COFF_I386PTXMAGIC	0x154
-#define COFF_I386AIXMAGIC	0x175   /* IBM's AIX system  */
-#define COFF_I386BADMAG(x) ((COFF_SHORT((x).f_magic) != COFF_I386MAGIC) \
-			  && COFF_SHORT((x).f_magic) != COFF_I386PTXMAGIC \
-			  && COFF_SHORT((x).f_magic) != COFF_I386AIXMAGIC)
-#else
-#define COFF_I386BADMAG(x) (COFF_SHORT((x).f_magic) != COFF_I386MAGIC)
-#endif
-
-#define	COFF_FILHDR	struct COFF_filehdr
-#define	COFF_FILHSZ	sizeof(COFF_FILHDR)
-
-/********************** AOUT "OPTIONAL HEADER" **********************/
-
-/* Linux COFF must have this "optional" header. Standard COFF has no entry
-   location for the "entry" point. They normally would start with the first
-   location of the .text section. This is not a good idea for linux. So,
-   the use of this "optional" header is not optional. It is required.
-
-   Do not be tempted to assume that the size of the optional header is
-   a constant and simply index the next byte by the size of this structure.
-   Use the 'f_opthdr' field in the main coff header for the size of the
-   structure actually written to the file!!
-*/
-
-typedef struct 
-{
-  char 	magic[2];		/* type of file				 */
-  char	vstamp[2];		/* version stamp			 */
-  char	tsize[4];		/* text size in bytes, padded to FW bdry */
-  char	dsize[4];		/* initialized   data "   "		 */
-  char	bsize[4];		/* uninitialized data "   "		 */
-  char	entry[4];		/* entry pt.				 */
-  char 	text_start[4];		/* base of text used for this file       */
-  char 	data_start[4];		/* base of data used for this file       */
-}
-COFF_AOUTHDR;
-
-#define COFF_AOUTSZ (sizeof(COFF_AOUTHDR))
-
-#define COFF_STMAGIC	0401
-#define COFF_OMAGIC     0404
-#define COFF_JMAGIC     0407    /* dirty text and data image, can't share  */
-#define COFF_DMAGIC     0410    /* dirty text segment, data aligned        */
-#define COFF_ZMAGIC     0413    /* The proper magic number for executables  */
-#define COFF_SHMAGIC	0443	/* shared library header                   */
-
-/********************** SECTION HEADER **********************/
-
-struct COFF_scnhdr {
-  char		s_name[8];	/* section name			    */
-  char		s_paddr[4];	/* physical address, aliased s_nlib */
-  char		s_vaddr[4];	/* virtual address		    */
-  char		s_size[4];	/* section size			    */
-  char		s_scnptr[4];	/* file ptr to raw data for section */
-  char		s_relptr[4];	/* file ptr to relocation	    */
-  char		s_lnnoptr[4];	/* file ptr to line numbers	    */
-  char		s_nreloc[2];	/* number of relocation entries	    */
-  char		s_nlnno[2];	/* number of line number entries    */
-  char		s_flags[4];	/* flags			    */
-};
-
-#define	COFF_SCNHDR	struct COFF_scnhdr
-#define	COFF_SCNHSZ	sizeof(COFF_SCNHDR)
-
-/*
- * names of "special" sections
- */
-
-#define COFF_TEXT	".text"
-#define COFF_DATA	".data"
-#define COFF_BSS	".bss"
-#define COFF_COMMENT    ".comment"
-#define COFF_LIB        ".lib"
-
-#define COFF_SECT_TEXT  0      /* Section for instruction code             */
-#define COFF_SECT_DATA  1      /* Section for initialized globals          */
-#define COFF_SECT_BSS   2      /* Section for un-initialized globals       */
-#define COFF_SECT_REQD  3      /* Minimum number of sections for good file */
-
-#define COFF_STYP_REG     0x00 /* regular segment                          */
-#define COFF_STYP_DSECT   0x01 /* dummy segment                            */
-#define COFF_STYP_NOLOAD  0x02 /* no-load segment                          */
-#define COFF_STYP_GROUP   0x04 /* group segment                            */
-#define COFF_STYP_PAD     0x08 /* .pad segment                             */
-#define COFF_STYP_COPY    0x10 /* copy section                             */
-#define COFF_STYP_TEXT    0x20 /* .text segment                            */
-#define COFF_STYP_DATA    0x40 /* .data segment                            */
-#define COFF_STYP_BSS     0x80 /* .bss segment                             */
-#define COFF_STYP_INFO   0x200 /* .comment section                         */
-#define COFF_STYP_OVER   0x400 /* overlay section                          */
-#define COFF_STYP_LIB    0x800 /* library section                          */
-
-/*
- * Shared libraries have the following section header in the data field for
- * each library.
- */
-
-struct COFF_slib {
-  char		sl_entsz[4];	/* Size of this entry               */
-  char		sl_pathndx[4];	/* size of the header field         */
-};
-
-#define	COFF_SLIBHD	struct COFF_slib
-#define	COFF_SLIBSZ	sizeof(COFF_SLIBHD)
-
-/********************** LINE NUMBERS **********************/
-
-/* 1 line number entry for every "breakpointable" source line in a section.
- * Line numbers are grouped on a per function basis; first entry in a function
- * grouping will have l_lnno = 0 and in place of physical address will be the
- * symbol table index of the function name.
- */
-
-struct COFF_lineno {
-  union {
-    char l_symndx[4];	/* function name symbol index, iff l_lnno == 0*/
-    char l_paddr[4];	/* (physical) address of line number	*/
-  } l_addr;
-  char l_lnno[2];	/* line number		*/
-};
-
-#define	COFF_LINENO	struct COFF_lineno
-#define	COFF_LINESZ	6
-
-/********************** SYMBOLS **********************/
-
-#define COFF_E_SYMNMLEN	 8	/* # characters in a short symbol name	*/
-#define COFF_E_FILNMLEN	14	/* # characters in a file name		*/
-#define COFF_E_DIMNUM	 4	/* # array dimensions in auxiliary entry */
-
-/*
- *  All symbols and sections have the following definition
- */
-
-struct COFF_syment 
-{
-  union {
-    char e_name[E_SYMNMLEN];    /* Symbol name (first 8 characters) */
-    struct {
-      char e_zeroes[4];         /* Leading zeros */
-      char e_offset[4];         /* Offset if this is a header section */
-    } e;
-  } e;
-
-  char e_value[4];              /* Value (address) of the segment */
-  char e_scnum[2];              /* Section number */
-  char e_type[2];               /* Type of section */
-  char e_sclass[1];             /* Loader class */
-  char e_numaux[1];             /* Number of auxiliary entries which follow */
-};
-
-#define COFF_N_BTMASK	(0xf)   /* Mask for important class bits */
-#define COFF_N_TMASK	(0x30)  /* Mask for important type bits  */
-#define COFF_N_BTSHFT	(4)     /* # bits to shift class field   */
-#define COFF_N_TSHIFT	(2)     /* # bits to shift type field    */
-
-/*
- *  Auxiliary entries because the main table is too limiting.
- */
-  
-union COFF_auxent {
-
-/*
- *  Debugger information
- */
-
-  struct {
-    char x_tagndx[4];	        /* str, un, or enum tag indx */
-    union {
-      struct {
-	char  x_lnno[2];        /* declaration line number */
-	char  x_size[2];        /* str/union/array size */
-      } x_lnsz;
-      char x_fsize[4];	        /* size of function */
-    } x_misc;
-
-    union {
-      struct {		        /* if ISFCN, tag, or .bb */
-	char x_lnnoptr[4];	/* ptr to fcn line # */
-	char x_endndx[4];	/* entry ndx past block end */
-      } x_fcn;
-
-      struct {		        /* if ISARY, up to 4 dimen. */
-	char x_dimen[E_DIMNUM][2];
-      } x_ary;
-    } x_fcnary;
-
-    char x_tvndx[2];	/* tv index */
-  } x_sym;
-
-/*
- *   Source file names (debugger information)
- */
-
-  union {
-    char x_fname[E_FILNMLEN];
-    struct {
-      char x_zeroes[4];
-      char x_offset[4];
-    } x_n;
-  } x_file;
-
-/*
- *   Section information
- */
-
-  struct {
-    char x_scnlen[4];	/* section length */
-    char x_nreloc[2];	/* # relocation entries */
-    char x_nlinno[2];	/* # line numbers */
-  } x_scn;
-
-/*
- *   Transfer vector (branch table)
- */
-  
-  struct {
-    char x_tvfill[4];	/* tv fill value */
-    char x_tvlen[2];	/* length of .tv */
-    char x_tvran[2][2];	/* tv range */
-  } x_tv;		/* info about .tv section (in auxent of symbol .tv)) */
-};
-
-#define	COFF_SYMENT	struct COFF_syment
-#define	COFF_SYMESZ	18	
-#define	COFF_AUXENT	union COFF_auxent
-#define	COFF_AUXESZ	18
-
-#define COFF_ETEXT	"etext"
-
-/********************** RELOCATION DIRECTIVES **********************/
-
-struct COFF_reloc {
-  char r_vaddr[4];        /* Virtual address of item    */
-  char r_symndx[4];       /* Symbol index in the symtab */
-  char r_type[2];         /* Relocation type            */
-};
-
-#define COFF_RELOC struct COFF_reloc
-#define COFF_RELSZ 10
-
-#define COFF_DEF_DATA_SECTION_ALIGNMENT  4
-#define COFF_DEF_BSS_SECTION_ALIGNMENT   4
-#define COFF_DEF_TEXT_SECTION_ALIGNMENT  4
-
-/* For new sections we haven't heard of before */
-#define COFF_DEF_SECTION_ALIGNMENT       4
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 76384074262d..b2b5a41b6a24 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -18,63 +18,9 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-
 #ifndef __CONNECTOR_H
 #define __CONNECTOR_H
 
-#include <linux/types.h>
-
-/*
- * Process Events connector unique ids -- used for message routing
- */
-#define CN_IDX_PROC			0x1
-#define CN_VAL_PROC			0x1
-#define CN_IDX_CIFS			0x2
-#define CN_VAL_CIFS                     0x1
-#define CN_W1_IDX			0x3	/* w1 communication */
-#define CN_W1_VAL			0x1
-#define CN_IDX_V86D			0x4
-#define CN_VAL_V86D_UVESAFB		0x1
-#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
-#define CN_DST_IDX			0x6
-#define CN_DST_VAL			0x1
-#define CN_IDX_DM			0x7	/* Device Mapper */
-#define CN_VAL_DM_USERSPACE_LOG		0x1
-#define CN_IDX_DRBD			0x8
-#define CN_VAL_DRBD			0x1
-#define CN_KVP_IDX			0x9	/* HyperV KVP */
-#define CN_KVP_VAL			0x1	/* queries from the kernel */
-
-#define CN_NETLINK_USERS		10	/* Highest index + 1 */
-
-/*
- * Maximum connector's message size.
- */
-#define CONNECTOR_MAX_MSG_SIZE		16384
-
-/*
- * idx and val are unique identifiers which 
- * are used for message routing and 
- * must be registered in connector.h for in-kernel usage.
- */
-
-struct cb_id {
-	__u32 idx;
-	__u32 val;
-};
-
-struct cn_msg {
-	struct cb_id id;
-
-	__u32 seq;
-	__u32 ack;
-
-	__u16 len;		/* Length of the following data */
-	__u16 flags;
-	__u8 data[0];
-};
-
-#ifdef __KERNEL__
 
 #include <linux/atomic.h>
 
@@ -82,6 +28,7 @@ struct cn_msg {
 #include <linux/workqueue.h>
 
 #include <net/sock.h>
+#include <uapi/linux/connector.h>
 
 #define CN_CBQ_NAMELEN		32
 
@@ -137,5 +84,4 @@ void cn_queue_free_dev(struct cn_queue_dev *dev);
 
 int cn_cb_equal(struct cb_id *, struct cb_id *);
 
-#endif				/* __KERNEL__ */
 #endif				/* __CONNECTOR_H */
diff --git a/include/linux/const.h b/include/linux/const.h
deleted file mode 100644
index c22c707c455d..000000000000
--- a/include/linux/const.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* const.h: Macros for dealing with constants.  */
-
-#ifndef _LINUX_CONST_H
-#define _LINUX_CONST_H
-
-/* Some constant macros are used in both assembler and
- * C code.  Therefore we cannot annotate them always with
- * 'UL' and other type specifiers unilaterally.  We
- * use the following macros to deal with this.
- *
- * Similarly, _AT() will cast an expression with a type in C, but
- * leave it unchanged in asm.
- */
-
-#ifdef __ASSEMBLY__
-#define _AC(X,Y)	X
-#define _AT(T,X)	X
-#else
-#define __AC(X,Y)	(X##Y)
-#define _AC(X,Y)	__AC(X,Y)
-#define _AT(T,X)	((T)(X))
-#endif
-
-#endif /* !(_LINUX_CONST_H) */
diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h
index 0e7bf272ec2f..133789609f23 100644
--- a/include/linux/cramfs_fs.h
+++ b/include/linux/cramfs_fs.h
@@ -1,94 +1,10 @@
 #ifndef __CRAMFS_H
 #define __CRAMFS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/cramfs_fs.h>
 
-#define CRAMFS_SIGNATURE	"Compressed ROMFS"
-
-/*
- * Width of various bitfields in struct cramfs_inode.
- * Primarily used to generate warnings in mkcramfs.
- */
-#define CRAMFS_MODE_WIDTH 16
-#define CRAMFS_UID_WIDTH 16
-#define CRAMFS_SIZE_WIDTH 24
-#define CRAMFS_GID_WIDTH 8
-#define CRAMFS_NAMELEN_WIDTH 6
-#define CRAMFS_OFFSET_WIDTH 26
-
-/*
- * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
- * path length is 63 << 2 = 252.
- */
-#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
-
-/*
- * Reasonably terse representation of the inode data.
- */
-struct cramfs_inode {
-	__u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
-	/* SIZE for device files is i_rdev */
-	__u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
-	/* NAMELEN is the length of the file name, divided by 4 and
-           rounded up.  (cramfs doesn't support hard links.) */
-	/* OFFSET: For symlinks and non-empty regular files, this
-	   contains the offset (divided by 4) of the file data in
-	   compressed form (starting with an array of block pointers;
-	   see README).  For non-empty directories it is the offset
-	   (divided by 4) of the inode of the first file in that
-	   directory.  For anything else, offset is zero. */
-	__u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
-};
-
-struct cramfs_info {
-	__u32 crc;
-	__u32 edition;
-	__u32 blocks;
-	__u32 files;
-};
-
-/*
- * Superblock information at the beginning of the FS.
- */
-struct cramfs_super {
-	__u32 magic;			/* 0x28cd3d45 - random number */
-	__u32 size;			/* length in bytes */
-	__u32 flags;			/* feature flags */
-	__u32 future;			/* reserved for future use */
-	__u8 signature[16];		/* "Compressed ROMFS" */
-	struct cramfs_info fsid;	/* unique filesystem info */
-	__u8 name[16];			/* user-defined name */
-	struct cramfs_inode root;	/* root inode data */
-};
-
-/*
- * Feature flags
- *
- * 0x00000000 - 0x000000ff: features that work for all past kernels
- * 0x00000100 - 0xffffffff: features that don't work for past kernels
- */
-#define CRAMFS_FLAG_FSID_VERSION_2	0x00000001	/* fsid version #2 */
-#define CRAMFS_FLAG_SORTED_DIRS		0x00000002	/* sorted dirs */
-#define CRAMFS_FLAG_HOLES		0x00000100	/* support for holes */
-#define CRAMFS_FLAG_WRONG_SIGNATURE	0x00000200	/* reserved */
-#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET	0x00000400	/* shifted root fs */
-
-/*
- * Valid values in super.flags.  Currently we refuse to mount
- * if (flags & ~CRAMFS_SUPPORTED_FLAGS).  Maybe that should be
- * changed to test super.future instead.
- */
-#define CRAMFS_SUPPORTED_FLAGS	( 0x000000ff \
-				| CRAMFS_FLAG_HOLES \
-				| CRAMFS_FLAG_WRONG_SIGNATURE \
-				| CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
-
-#ifdef __KERNEL__
 /* Uncompression interfaces to the underlying zlib */
 int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen);
 int cramfs_uncompress_init(void);
 void cramfs_uncompress_exit(void);
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/cuda.h b/include/linux/cuda.h
index 9f9865ff781e..b72332823807 100644
--- a/include/linux/cuda.h
+++ b/include/linux/cuda.h
@@ -4,38 +4,15 @@
  *
  * Copyright (C) 1996 Paul Mackerras.
  */
-
 #ifndef _LINUX_CUDA_H
 #define _LINUX_CUDA_H
 
-/* CUDA commands (2nd byte) */
-#define CUDA_WARM_START		0
-#define CUDA_AUTOPOLL		1
-#define CUDA_GET_6805_ADDR	2
-#define CUDA_GET_TIME		3
-#define CUDA_GET_PRAM		7
-#define CUDA_SET_6805_ADDR	8
-#define CUDA_SET_TIME		9
-#define CUDA_POWERDOWN		0xa
-#define CUDA_POWERUP_TIME	0xb
-#define CUDA_SET_PRAM		0xc
-#define CUDA_MS_RESET		0xd
-#define CUDA_SEND_DFAC		0xe
-#define CUDA_RESET_SYSTEM	0x11
-#define CUDA_SET_IPL		0x12
-#define CUDA_SET_AUTO_RATE	0x14
-#define CUDA_GET_AUTO_RATE	0x16
-#define CUDA_SET_DEVICE_LIST	0x19
-#define CUDA_GET_DEVICE_LIST	0x1a
-#define CUDA_GET_SET_IIC	0x22
+#include <uapi/linux/cuda.h>
 
-#ifdef __KERNEL__
 
 extern int find_via_cuda(void);
 extern int cuda_request(struct adb_request *req,
 			void (*done)(struct adb_request *), int nbytes, ...);
 extern void cuda_poll(void);
 
-#endif	/* __KERNEL */
-
 #endif /* _LINUX_CUDA_H */
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index a5049eaf782d..19ae518f5471 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -63,434 +63,11 @@
  *
  *
  */
-
 #ifndef _LINUX_CYCLADES_H
 #define _LINUX_CYCLADES_H
 
-#include <linux/types.h>
-
-struct cyclades_monitor {
-        unsigned long           int_count;
-        unsigned long           char_count;
-        unsigned long           char_max;
-        unsigned long           char_last;
-};
-
-/*
- * These stats all reflect activity since the device was last initialized.
- * (i.e., since the port was opened with no other processes already having it
- * open)
- */
-struct cyclades_idle_stats {
-    __kernel_time_t in_use;	/* Time device has been in use (secs) */
-    __kernel_time_t recv_idle;	/* Time since last char received (secs) */
-    __kernel_time_t xmit_idle;	/* Time since last char transmitted (secs) */
-    unsigned long  recv_bytes;	/* Bytes received */
-    unsigned long  xmit_bytes;	/* Bytes transmitted */
-    unsigned long  overruns;	/* Input overruns */
-    unsigned long  frame_errs;	/* Input framing errors */
-    unsigned long  parity_errs;	/* Input parity errors */
-};
-
-#define CYCLADES_MAGIC  0x4359
-
-#define CYGETMON                0x435901
-#define CYGETTHRESH             0x435902
-#define CYSETTHRESH             0x435903
-#define CYGETDEFTHRESH          0x435904
-#define CYSETDEFTHRESH          0x435905
-#define CYGETTIMEOUT            0x435906
-#define CYSETTIMEOUT            0x435907
-#define CYGETDEFTIMEOUT         0x435908
-#define CYSETDEFTIMEOUT         0x435909
-#define CYSETRFLOW		0x43590a
-#define CYGETRFLOW		0x43590b
-#define CYSETRTSDTR_INV		0x43590c
-#define CYGETRTSDTR_INV		0x43590d
-#define CYZSETPOLLCYCLE		0x43590e
-#define CYZGETPOLLCYCLE		0x43590f
-#define CYGETCD1400VER		0x435910
-#define	CYSETWAIT		0x435912
-#define	CYGETWAIT		0x435913
-
-/*************** CYCLOM-Z ADDITIONS ***************/
-
-#define CZIOC           ('M' << 8)
-#define CZ_NBOARDS      (CZIOC|0xfa)
-#define CZ_BOOT_START   (CZIOC|0xfb)
-#define CZ_BOOT_DATA    (CZIOC|0xfc)
-#define CZ_BOOT_END     (CZIOC|0xfd)
-#define CZ_TEST         (CZIOC|0xfe)
-
-#define CZ_DEF_POLL	(HZ/25)
-
-#define MAX_BOARD       4       /* Max number of boards */
-#define MAX_DEV         256     /* Max number of ports total */
-#define	CYZ_MAX_SPEED	921600
-
-#define	CYZ_FIFO_SIZE	16
-
-#define CYZ_BOOT_NWORDS 0x100
-struct CYZ_BOOT_CTRL {
-        unsigned short  nboard;
-        int             status[MAX_BOARD];
-        int             nchannel[MAX_BOARD];
-        int             fw_rev[MAX_BOARD];
-        unsigned long   offset;
-        unsigned long   data[CYZ_BOOT_NWORDS];
-};
-
-
-#ifndef DP_WINDOW_SIZE
-/*
- *	Memory Window Sizes
- */
-
-#define	DP_WINDOW_SIZE		(0x00080000)	/* window size 512 Kb */
-#define	ZE_DP_WINDOW_SIZE	(0x00100000)	/* window size 1 Mb (Ze and
-						  8Zo V.2 */
-#define	CTRL_WINDOW_SIZE	(0x00000080)	/* runtime regs 128 bytes */
-
-/*
- *	CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
- *	normally will access only interested on the fpga_id, fpga_version,
- *	start_cpu and stop_cpu.
- */
-
-struct	CUSTOM_REG {
-	__u32	fpga_id;		/* FPGA Identification Register */
-	__u32	fpga_version;		/* FPGA Version Number Register */
-	__u32	cpu_start;		/* CPU start Register (write) */
-	__u32	cpu_stop;		/* CPU stop Register (write) */
-	__u32	misc_reg;		/* Miscellaneous Register */
-	__u32	idt_mode;		/* IDT mode Register */
-	__u32	uart_irq_status;	/* UART IRQ status Register */
-	__u32	clear_timer0_irq;	/* Clear timer interrupt Register */
-	__u32	clear_timer1_irq;	/* Clear timer interrupt Register */
-	__u32	clear_timer2_irq;	/* Clear timer interrupt Register */
-	__u32	test_register;		/* Test Register */
-	__u32	test_count;		/* Test Count Register */
-	__u32	timer_select;		/* Timer select register */
-	__u32	pr_uart_irq_status;	/* Prioritized UART IRQ stat Reg */
-	__u32	ram_wait_state;		/* RAM wait-state Register */
-	__u32	uart_wait_state;	/* UART wait-state Register */
-	__u32	timer_wait_state;	/* timer wait-state Register */
-	__u32	ack_wait_state;		/* ACK wait State Register */
-};
-
-/*
- *	RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
- *	registers. This structure can be used to access the 9060 registers
- *	(memory mapped).
- */
-
-struct RUNTIME_9060 {
-	__u32	loc_addr_range;	/* 00h - Local Address Range */
-	__u32	loc_addr_base;	/* 04h - Local Address Base */
-	__u32	loc_arbitr;	/* 08h - Local Arbitration */
-	__u32	endian_descr;	/* 0Ch - Big/Little Endian Descriptor */
-	__u32	loc_rom_range;	/* 10h - Local ROM Range */
-	__u32	loc_rom_base;	/* 14h - Local ROM Base */
-	__u32	loc_bus_descr;	/* 18h - Local Bus descriptor */
-	__u32	loc_range_mst;	/* 1Ch - Local Range for Master to PCI */
-	__u32	loc_base_mst;	/* 20h - Local Base for Master PCI */
-	__u32	loc_range_io;	/* 24h - Local Range for Master IO */
-	__u32	pci_base_mst;	/* 28h - PCI Base for Master PCI */
-	__u32	pci_conf_io;	/* 2Ch - PCI configuration for Master IO */
-	__u32	filler1;	/* 30h */
-	__u32	filler2;	/* 34h */
-	__u32	filler3;	/* 38h */
-	__u32	filler4;	/* 3Ch */
-	__u32	mail_box_0;	/* 40h - Mail Box 0 */
-	__u32	mail_box_1;	/* 44h - Mail Box 1 */
-	__u32	mail_box_2;	/* 48h - Mail Box 2 */
-	__u32	mail_box_3;	/* 4Ch - Mail Box 3 */
-	__u32	filler5;	/* 50h */
-	__u32	filler6;	/* 54h */
-	__u32	filler7;	/* 58h */
-	__u32	filler8;	/* 5Ch */
-	__u32	pci_doorbell;	/* 60h - PCI to Local Doorbell */
-	__u32	loc_doorbell;	/* 64h - Local to PCI Doorbell */
-	__u32	intr_ctrl_stat;	/* 68h - Interrupt Control/Status */
-	__u32	init_ctrl;	/* 6Ch - EEPROM control, Init Control, etc */
-};
-
-/* Values for the Local Base Address re-map register */
-
-#define	WIN_RAM		0x00000001L	/* set the sliding window to RAM */
-#define	WIN_CREG	0x14000001L	/* set the window to custom Registers */
-
-/* Values timer select registers */
-
-#define	TIMER_BY_1M	0x00		/* clock divided by 1M */
-#define	TIMER_BY_256K	0x01		/* clock divided by 256k */
-#define	TIMER_BY_128K	0x02		/* clock divided by 128k */
-#define	TIMER_BY_32K	0x03		/* clock divided by 32k */
-
-/****************** ****************** *******************/
-#endif
-
-#ifndef ZFIRM_ID
-/* #include "zfwint.h" */
-/****************** ****************** *******************/
-/*
- *	This file contains the definitions for interfacing with the
- *	Cyclom-Z ZFIRM Firmware.
- */
-
-/* General Constant definitions */
-
-#define	MAX_CHAN	64		/* max number of channels per board */
-
-/* firmware id structure (set after boot) */
-
-#define ID_ADDRESS	0x00000180L	/* signature/pointer address */
-#define	ZFIRM_ID	0x5557465AL	/* ZFIRM/U signature */
-#define	ZFIRM_HLT	0x59505B5CL	/* ZFIRM needs external power supply */
-#define	ZFIRM_RST	0x56040674L	/* RST signal (due to FW reset) */
-
-#define	ZF_TINACT_DEF	1000		/* default inactivity timeout 
-					   (1000 ms) */
-#define	ZF_TINACT	ZF_TINACT_DEF
-
-struct	FIRM_ID {
-	__u32	signature;		/* ZFIRM/U signature */
-	__u32	zfwctrl_addr;		/* pointer to ZFW_CTRL structure */
-};
-
-/* Op. System id */
-
-#define	C_OS_LINUX	0x00000030	/* generic Linux system */
-
-/* channel op_mode */
-
-#define	C_CH_DISABLE	0x00000000	/* channel is disabled */
-#define	C_CH_TXENABLE	0x00000001	/* channel Tx enabled */
-#define	C_CH_RXENABLE	0x00000002	/* channel Rx enabled */
-#define	C_CH_ENABLE	0x00000003	/* channel Tx/Rx enabled */
-#define	C_CH_LOOPBACK	0x00000004	/* Loopback mode */
-
-/* comm_parity - parity */
-
-#define	C_PR_NONE	0x00000000	/* None */
-#define	C_PR_ODD	0x00000001	/* Odd */
-#define C_PR_EVEN	0x00000002	/* Even */
-#define C_PR_MARK	0x00000004	/* Mark */
-#define C_PR_SPACE	0x00000008	/* Space */
-#define C_PR_PARITY	0x000000ff
-
-#define	C_PR_DISCARD	0x00000100	/* discard char with frame/par error */
-#define C_PR_IGNORE	0x00000200	/* ignore frame/par error */
-
-/* comm_data_l - data length and stop bits */
-
-#define C_DL_CS5	0x00000001
-#define C_DL_CS6	0x00000002
-#define C_DL_CS7	0x00000004
-#define C_DL_CS8	0x00000008
-#define	C_DL_CS		0x0000000f
-#define C_DL_1STOP	0x00000010
-#define C_DL_15STOP	0x00000020
-#define C_DL_2STOP	0x00000040
-#define	C_DL_STOP	0x000000f0
-
-/* interrupt enabling/status */
-
-#define	C_IN_DISABLE	0x00000000	/* zero, disable interrupts */
-#define	C_IN_TXBEMPTY	0x00000001	/* tx buffer empty */
-#define	C_IN_TXLOWWM	0x00000002	/* tx buffer below LWM */
-#define	C_IN_RXHIWM	0x00000010	/* rx buffer above HWM */
-#define	C_IN_RXNNDT	0x00000020	/* rx no new data timeout */
-#define	C_IN_MDCD	0x00000100	/* modem DCD change */
-#define	C_IN_MDSR	0x00000200	/* modem DSR change */
-#define	C_IN_MRI	0x00000400	/* modem RI change */
-#define	C_IN_MCTS	0x00000800	/* modem CTS change */
-#define	C_IN_RXBRK	0x00001000	/* Break received */
-#define	C_IN_PR_ERROR	0x00002000	/* parity error */
-#define	C_IN_FR_ERROR	0x00004000	/* frame error */
-#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
-#define C_IN_RXOFL	0x00010000      /* RX buffer overflow */
-#define C_IN_IOCTLW	0x00020000      /* I/O control w/ wait */
-#define C_IN_MRTS	0x00040000	/* modem RTS drop */
-#define C_IN_ICHAR	0x00080000
- 
-/* flow control */
-
-#define	C_FL_OXX	0x00000001	/* output Xon/Xoff flow control */
-#define	C_FL_IXX	0x00000002	/* output Xon/Xoff flow control */
-#define C_FL_OIXANY	0x00000004	/* output Xon/Xoff (any xon) */
-#define	C_FL_SWFLOW	0x0000000f
-
-/* flow status */
-
-#define	C_FS_TXIDLE	0x00000000	/* no Tx data in the buffer or UART */
-#define	C_FS_SENDING	0x00000001	/* UART is sending data */
-#define	C_FS_SWFLOW	0x00000002	/* Tx is stopped by received Xoff */
-
-/* rs_control/rs_status RS-232 signals */
-
-#define C_RS_PARAM	0x80000000	/* Indicates presence of parameter in 
-					   IOCTLM command */
-#define	C_RS_RTS	0x00000001	/* RTS */
-#define	C_RS_DTR	0x00000004	/* DTR */
-#define	C_RS_DCD	0x00000100	/* CD */
-#define	C_RS_DSR	0x00000200	/* DSR */
-#define	C_RS_RI		0x00000400	/* RI */
-#define	C_RS_CTS	0x00000800	/* CTS */
-
-/* commands Host <-> Board */
-
-#define	C_CM_RESET	0x01		/* reset/flush buffers */
-#define	C_CM_IOCTL	0x02		/* re-read CH_CTRL */
-#define	C_CM_IOCTLW	0x03		/* re-read CH_CTRL, intr when done */
-#define	C_CM_IOCTLM	0x04		/* RS-232 outputs change */
-#define	C_CM_SENDXOFF	0x10		/* send Xoff */
-#define	C_CM_SENDXON	0x11		/* send Xon */
-#define C_CM_CLFLOW	0x12		/* Clear flow control (resume) */
-#define	C_CM_SENDBRK	0x41		/* send break */
-#define	C_CM_INTBACK	0x42		/* Interrupt back */
-#define	C_CM_SET_BREAK	0x43		/* Tx break on */
-#define	C_CM_CLR_BREAK	0x44		/* Tx break off */
-#define	C_CM_CMD_DONE	0x45		/* Previous command done */
-#define C_CM_INTBACK2	0x46		/* Alternate Interrupt back */
-#define	C_CM_TINACT	0x51		/* set inactivity detection */
-#define	C_CM_IRQ_ENBL	0x52		/* enable generation of interrupts */
-#define	C_CM_IRQ_DSBL	0x53		/* disable generation of interrupts */
-#define	C_CM_ACK_ENBL	0x54		/* enable acknowledged interrupt mode */
-#define	C_CM_ACK_DSBL	0x55		/* disable acknowledged intr mode */
-#define	C_CM_FLUSH_RX	0x56		/* flushes Rx buffer */
-#define	C_CM_FLUSH_TX	0x57		/* flushes Tx buffer */
-#define C_CM_Q_ENABLE	0x58		/* enables queue access from the 
-					   driver */
-#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
-					   driver */
-
-#define	C_CM_TXBEMPTY	0x60		/* Tx buffer is empty */
-#define	C_CM_TXLOWWM	0x61		/* Tx buffer low water mark */
-#define	C_CM_RXHIWM	0x62		/* Rx buffer high water mark */
-#define	C_CM_RXNNDT	0x63		/* rx no new data timeout */
-#define	C_CM_TXFEMPTY	0x64
-#define	C_CM_ICHAR	0x65
-#define	C_CM_MDCD	0x70		/* modem DCD change */
-#define	C_CM_MDSR	0x71		/* modem DSR change */
-#define	C_CM_MRI	0x72		/* modem RI change */
-#define	C_CM_MCTS	0x73		/* modem CTS change */
-#define C_CM_MRTS	0x74		/* modem RTS drop */
-#define	C_CM_RXBRK	0x84		/* Break received */
-#define	C_CM_PR_ERROR	0x85		/* Parity error */
-#define	C_CM_FR_ERROR	0x86		/* Frame error */
-#define C_CM_OVR_ERROR  0x87            /* Overrun error */
-#define C_CM_RXOFL	0x88            /* RX buffer overflow */
-#define	C_CM_CMDERROR	0x90		/* command error */
-#define	C_CM_FATAL	0x91		/* fatal error */
-#define	C_CM_HW_RESET	0x92		/* reset board */
-
-/*
- *	CH_CTRL - This per port structure contains all parameters
- *	that control an specific port. It can be seen as the
- *	configuration registers of a "super-serial-controller".
- */
-
-struct CH_CTRL {
-	__u32	op_mode;	/* operation mode */
-	__u32	intr_enable;	/* interrupt masking */
-	__u32	sw_flow;	/* SW flow control */
-	__u32	flow_status;	/* output flow status */
-	__u32	comm_baud;	/* baud rate  - numerically specified */
-	__u32	comm_parity;	/* parity */
-	__u32	comm_data_l;	/* data length/stop */
-	__u32	comm_flags;	/* other flags */
-	__u32	hw_flow;	/* HW flow control */
-	__u32	rs_control;	/* RS-232 outputs */
-	__u32	rs_status;	/* RS-232 inputs */
-	__u32	flow_xon;	/* xon char */
-	__u32	flow_xoff;	/* xoff char */
-	__u32	hw_overflow;	/* hw overflow counter */
-	__u32	sw_overflow;	/* sw overflow counter */
-	__u32	comm_error;	/* frame/parity error counter */
-	__u32 ichar;
-	__u32 filler[7];
-};
-
-
-/*
- *	BUF_CTRL - This per channel structure contains
- *	all Tx and Rx buffer control for a given channel.
- */
-
-struct	BUF_CTRL	{
-	__u32	flag_dma;	/* buffers are in Host memory */
-	__u32	tx_bufaddr;	/* address of the tx buffer */
-	__u32	tx_bufsize;	/* tx buffer size */
-	__u32	tx_threshold;	/* tx low water mark */
-	__u32	tx_get;		/* tail index tx buf */
-	__u32	tx_put;		/* head index tx buf */
-	__u32	rx_bufaddr;	/* address of the rx buffer */
-	__u32	rx_bufsize;	/* rx buffer size */
-	__u32	rx_threshold;	/* rx high water mark */
-	__u32	rx_get;		/* tail index rx buf */
-	__u32	rx_put;		/* head index rx buf */
-	__u32	filler[5];	/* filler to align structures */
-};
-
-/*
- *	BOARD_CTRL - This per board structure contains all global 
- *	control fields related to the board.
- */
-
-struct BOARD_CTRL {
-
-	/* static info provided by the on-board CPU */
-	__u32	n_channel;	/* number of channels */
-	__u32	fw_version;	/* firmware version */
-
-	/* static info provided by the driver */
-	__u32	op_system;	/* op_system id */
-	__u32	dr_version;	/* driver version */
-
-	/* board control area */
-	__u32	inactivity;	/* inactivity control */
-
-	/* host to FW commands */
-	__u32	hcmd_channel;	/* channel number */
-	__u32	hcmd_param;	/* pointer to parameters */
-
-	/* FW to Host commands */
-	__u32	fwcmd_channel;	/* channel number */
-	__u32	fwcmd_param;	/* pointer to parameters */
-	__u32	zf_int_queue_addr; /* offset for INT_QUEUE structure */
-
-	/* filler so the structures are aligned */
-	__u32	filler[6];
-};
-
-/* Host Interrupt Queue */
-
-#define QUEUE_SIZE	(10*MAX_CHAN)
-
-struct	INT_QUEUE {
-	unsigned char	intr_code[QUEUE_SIZE];
-	unsigned long	channel[QUEUE_SIZE];
-	unsigned long	param[QUEUE_SIZE];
-	unsigned long	put;
-	unsigned long	get;
-};
-
-/*
- *	ZFW_CTRL - This is the data structure that includes all other
- *	data structures used by the Firmware.
- */
- 
-struct ZFW_CTRL {
-	struct BOARD_CTRL	board_ctrl;
-	struct CH_CTRL		ch_ctrl[MAX_CHAN];
-	struct BUF_CTRL		buf_ctrl[MAX_CHAN];
-};
-
-/****************** ****************** *******************/
-#endif
+#include <uapi/linux/cyclades.h>
 
-#ifdef __KERNEL__
 
 /* Per card data structure */
 struct cyclades_card {
@@ -780,5 +357,4 @@ struct cyclades_port {
 
 /***************************************************************************/
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_CYCLADES_H */
diff --git a/include/linux/cycx_cfm.h b/include/linux/cycx_cfm.h
deleted file mode 100644
index 032d26ed8384..000000000000
--- a/include/linux/cycx_cfm.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-* cycx_cfm.h	Cyclom 2X WAN Link Driver.
-*		Definitions for the Cyclom 2X Firmware Module (CFM).
-*
-* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on sdlasfm.h by Gene Kozin <74604.152@compuserve.com>
-*
-*		This program is free software; you can redistribute it and/or
-*		modify it under the terms of the GNU General Public License
-*		as published by the Free Software Foundation; either version
-*		2 of the License, or (at your option) any later version.
-* ============================================================================
-* 1998/08/08	acme		Initial version.
-*/
-#ifndef	_CYCX_CFM_H
-#define	_CYCX_CFM_H
-
-/* Defines */
-
-#define	CFM_VERSION	2
-#define	CFM_SIGNATURE	"CFM - Cyclades CYCX Firmware Module"
-
-/* min/max */
-#define	CFM_IMAGE_SIZE	0x20000	/* max size of CYCX code image file */
-#define	CFM_DESCR_LEN	256	/* max length of description string */
-#define	CFM_MAX_CYCX	1	/* max number of compatible adapters */
-#define	CFM_LOAD_BUFSZ	0x400	/* buffer size for reset code (buffer_load) */
-
-/* Firmware Commands */
-#define GEN_POWER_ON	0x1280
-
-#define GEN_SET_SEG	0x1401	/* boot segment setting. */
-#define GEN_BOOT_DAT	0x1402	/* boot data. */
-#define GEN_START	0x1403	/* board start. */
-#define GEN_DEFPAR	0x1404	/* buffer length for boot. */
-
-/* Adapter Types */
-#define CYCX_2X		2
-/* for now only the 2X is supported, no plans to support 8X or 16X */
-#define CYCX_8X		8
-#define CYCX_16X	16
-
-#define	CFID_X25_2X	5200
-
-/**
- *	struct cycx_fw_info - firmware module information.
- *	@codeid - firmware ID
- *	@version - firmware version number
- *	@adapter - compatible adapter types
- *	@memsize - minimum memory size
- *	@reserved - reserved
- *	@startoffs - entry point offset
- *	@winoffs - dual-port memory window offset
- *	@codeoffs - code load offset
- *	@codesize - code size
- *	@dataoffs - configuration data load offset
- *	@datasize - configuration data size
- */
-struct cycx_fw_info {
-	unsigned short	codeid;
-	unsigned short	version;
-	unsigned short	adapter[CFM_MAX_CYCX];
-	unsigned long	memsize;
-	unsigned short	reserved[2];
-	unsigned short	startoffs;
-	unsigned short	winoffs;
-	unsigned short	codeoffs;
-	unsigned long	codesize;
-	unsigned short	dataoffs;
-	unsigned long	datasize;
-};
-
-/**
- *	struct cycx_firmware - CYCX firmware file structure
- *	@signature - CFM file signature
- *	@version - file format version
- *	@checksum - info + image
- *	@reserved - reserved
- *	@descr - description string
- *	@info - firmware module info
- *	@image - code image (variable size)
- */
-struct cycx_firmware {
-	char		    signature[80];
-	unsigned short	    version;
-	unsigned short	    checksum;
-	unsigned short	    reserved[6];
-	char		    descr[CFM_DESCR_LEN];
-	struct cycx_fw_info info;
-	unsigned char	    image[0];
-};
-
-struct cycx_fw_header {
-	unsigned long  reset_size;
-	unsigned long  data_size;
-	unsigned long  code_size;
-};
-#endif	/* _CYCX_CFM_H */
diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h
deleted file mode 100644
index 6bb43382f3f3..000000000000
--- a/include/linux/dcbnl.h
+++ /dev/null
@@ -1,684 +0,0 @@
-/*
- * Copyright (c) 2008-2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- * Author: Lucy Liu <lucy.liu@intel.com>
- */
-
-#ifndef __LINUX_DCBNL_H__
-#define __LINUX_DCBNL_H__
-
-#include <linux/types.h>
-
-/* IEEE 802.1Qaz std supported values */
-#define IEEE_8021QAZ_MAX_TCS	8
-
-#define IEEE_8021QAZ_TSA_STRICT		0
-#define IEEE_8021QAZ_TSA_CB_SHAPER	1
-#define IEEE_8021QAZ_TSA_ETS		2
-#define IEEE_8021QAZ_TSA_VENDOR		255
-
-/* This structure contains the IEEE 802.1Qaz ETS managed object
- *
- * @willing: willing bit in ETS configuration TLV
- * @ets_cap: indicates supported capacity of ets feature
- * @cbs: credit based shaper ets algorithm supported
- * @tc_tx_bw: tc tx bandwidth indexed by traffic class
- * @tc_rx_bw: tc rx bandwidth indexed by traffic class
- * @tc_tsa: TSA Assignment table, indexed by traffic class
- * @prio_tc: priority assignment table mapping 8021Qp to traffic class
- * @tc_reco_bw: recommended tc bandwidth indexed by traffic class for TLV
- * @tc_reco_tsa: recommended tc bandwidth indexed by traffic class for TLV
- * @reco_prio_tc: recommended tc tx bandwidth indexed by traffic class for TLV
- *
- * Recommended values are used to set fields in the ETS recommendation TLV
- * with hardware offloaded LLDP.
- *
- * ----
- *  TSA Assignment 8 bit identifiers
- *	0	strict priority
- *	1	credit-based shaper
- *	2	enhanced transmission selection
- *	3-254	reserved
- *	255	vendor specific
- */
-struct ieee_ets {
-	__u8	willing;
-	__u8	ets_cap;
-	__u8	cbs;
-	__u8	tc_tx_bw[IEEE_8021QAZ_MAX_TCS];
-	__u8	tc_rx_bw[IEEE_8021QAZ_MAX_TCS];
-	__u8	tc_tsa[IEEE_8021QAZ_MAX_TCS];
-	__u8	prio_tc[IEEE_8021QAZ_MAX_TCS];
-	__u8	tc_reco_bw[IEEE_8021QAZ_MAX_TCS];
-	__u8	tc_reco_tsa[IEEE_8021QAZ_MAX_TCS];
-	__u8	reco_prio_tc[IEEE_8021QAZ_MAX_TCS];
-};
-
-/* This structure contains rate limit extension to the IEEE 802.1Qaz ETS
- * managed object.
- * Values are 64 bits long and specified in Kbps to enable usage over both
- * slow and very fast networks.
- *
- * @tc_maxrate: maximal tc tx bandwidth indexed by traffic class
- */
-struct ieee_maxrate {
-	__u64	tc_maxrate[IEEE_8021QAZ_MAX_TCS];
-};
-
-/* This structure contains the IEEE 802.1Qaz PFC managed object
- *
- * @pfc_cap: Indicates the number of traffic classes on the local device
- *	     that may simultaneously have PFC enabled.
- * @pfc_en: bitmap indicating pfc enabled traffic classes
- * @mbc: enable macsec bypass capability
- * @delay: the allowance made for a round-trip propagation delay of the
- *	   link in bits.
- * @requests: count of the sent pfc frames
- * @indications: count of the received pfc frames
- */
-struct ieee_pfc {
-	__u8	pfc_cap;
-	__u8	pfc_en;
-	__u8	mbc;
-	__u16	delay;
-	__u64	requests[IEEE_8021QAZ_MAX_TCS];
-	__u64	indications[IEEE_8021QAZ_MAX_TCS];
-};
-
-/* CEE DCBX std supported values */
-#define CEE_DCBX_MAX_PGS	8
-#define CEE_DCBX_MAX_PRIO	8
-
-/**
- * struct cee_pg - CEE Priority-Group managed object
- *
- * @willing: willing bit in the PG tlv
- * @error: error bit in the PG tlv
- * @pg_en: enable bit of the PG feature
- * @tcs_supported: number of traffic classes supported
- * @pg_bw: bandwidth percentage for each priority group
- * @prio_pg: priority to PG mapping indexed by priority
- */
-struct cee_pg {
-	__u8    willing;
-	__u8    error;
-	__u8    pg_en;
-	__u8    tcs_supported;
-	__u8    pg_bw[CEE_DCBX_MAX_PGS];
-	__u8    prio_pg[CEE_DCBX_MAX_PGS];
-};
-
-/**
- * struct cee_pfc - CEE PFC managed object
- *
- * @willing: willing bit in the PFC tlv
- * @error: error bit in the PFC tlv
- * @pfc_en: bitmap indicating pfc enabled traffic classes
- * @tcs_supported: number of traffic classes supported
- */
-struct cee_pfc {
-	__u8    willing;
-	__u8    error;
-	__u8    pfc_en;
-	__u8    tcs_supported;
-};
-
-/* IEEE 802.1Qaz std supported values */
-#define IEEE_8021QAZ_APP_SEL_ETHERTYPE	1
-#define IEEE_8021QAZ_APP_SEL_STREAM	2
-#define IEEE_8021QAZ_APP_SEL_DGRAM	3
-#define IEEE_8021QAZ_APP_SEL_ANY	4
-
-/* This structure contains the IEEE 802.1Qaz APP managed object. This
- * object is also used for the CEE std as well. There is no difference
- * between the objects.
- *
- * @selector: protocol identifier type
- * @protocol: protocol of type indicated
- * @priority: 3-bit unsigned integer indicating priority
- *
- * ----
- *  Selector field values
- *	0	Reserved
- *	1	Ethertype
- *	2	Well known port number over TCP or SCTP
- *	3	Well known port number over UDP or DCCP
- *	4	Well known port number over TCP, SCTP, UDP, or DCCP
- *	5-7	Reserved
- */
-struct dcb_app {
-	__u8	selector;
-	__u8	priority;
-	__u16	protocol;
-};
-
-/**
- * struct dcb_peer_app_info - APP feature information sent by the peer
- *
- * @willing: willing bit in the peer APP tlv
- * @error: error bit in the peer APP tlv
- *
- * In addition to this information the full peer APP tlv also contains
- * a table of 'app_count' APP objects defined above.
- */
-struct dcb_peer_app_info {
-	__u8	willing;
-	__u8	error;
-};
-
-struct dcbmsg {
-	__u8               dcb_family;
-	__u8               cmd;
-	__u16              dcb_pad;
-};
-
-/**
- * enum dcbnl_commands - supported DCB commands
- *
- * @DCB_CMD_UNDEFINED: unspecified command to catch errors
- * @DCB_CMD_GSTATE: request the state of DCB in the device
- * @DCB_CMD_SSTATE: set the state of DCB in the device
- * @DCB_CMD_PGTX_GCFG: request the priority group configuration for Tx
- * @DCB_CMD_PGTX_SCFG: set the priority group configuration for Tx
- * @DCB_CMD_PGRX_GCFG: request the priority group configuration for Rx
- * @DCB_CMD_PGRX_SCFG: set the priority group configuration for Rx
- * @DCB_CMD_PFC_GCFG: request the priority flow control configuration
- * @DCB_CMD_PFC_SCFG: set the priority flow control configuration
- * @DCB_CMD_SET_ALL: apply all changes to the underlying device
- * @DCB_CMD_GPERM_HWADDR: get the permanent MAC address of the underlying
- *                        device.  Only useful when using bonding.
- * @DCB_CMD_GCAP: request the DCB capabilities of the device
- * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported
- * @DCB_CMD_SNUMTCS: set the number of traffic classes
- * @DCB_CMD_GBCN: set backward congestion notification configuration
- * @DCB_CMD_SBCN: get backward congestion notification configration.
- * @DCB_CMD_GAPP: get application protocol configuration
- * @DCB_CMD_SAPP: set application protocol configuration
- * @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration
- * @DCB_CMD_IEEE_GET: get IEEE 802.1Qaz configuration
- * @DCB_CMD_GDCBX: get DCBX engine configuration
- * @DCB_CMD_SDCBX: set DCBX engine configuration
- * @DCB_CMD_GFEATCFG: get DCBX features flags
- * @DCB_CMD_SFEATCFG: set DCBX features negotiation flags
- * @DCB_CMD_CEE_GET: get CEE aggregated configuration
- * @DCB_CMD_IEEE_DEL: delete IEEE 802.1Qaz configuration
- */
-enum dcbnl_commands {
-	DCB_CMD_UNDEFINED,
-
-	DCB_CMD_GSTATE,
-	DCB_CMD_SSTATE,
-
-	DCB_CMD_PGTX_GCFG,
-	DCB_CMD_PGTX_SCFG,
-	DCB_CMD_PGRX_GCFG,
-	DCB_CMD_PGRX_SCFG,
-
-	DCB_CMD_PFC_GCFG,
-	DCB_CMD_PFC_SCFG,
-
-	DCB_CMD_SET_ALL,
-
-	DCB_CMD_GPERM_HWADDR,
-
-	DCB_CMD_GCAP,
-
-	DCB_CMD_GNUMTCS,
-	DCB_CMD_SNUMTCS,
-
-	DCB_CMD_PFC_GSTATE,
-	DCB_CMD_PFC_SSTATE,
-
-	DCB_CMD_BCN_GCFG,
-	DCB_CMD_BCN_SCFG,
-
-	DCB_CMD_GAPP,
-	DCB_CMD_SAPP,
-
-	DCB_CMD_IEEE_SET,
-	DCB_CMD_IEEE_GET,
-
-	DCB_CMD_GDCBX,
-	DCB_CMD_SDCBX,
-
-	DCB_CMD_GFEATCFG,
-	DCB_CMD_SFEATCFG,
-
-	DCB_CMD_CEE_GET,
-	DCB_CMD_IEEE_DEL,
-
-	__DCB_CMD_ENUM_MAX,
-	DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_attrs - DCB top-level netlink attributes
- *
- * @DCB_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_ATTR_IFNAME: interface name of the underlying device (NLA_STRING)
- * @DCB_ATTR_STATE: enable state of DCB in the device (NLA_U8)
- * @DCB_ATTR_PFC_STATE: enable state of PFC in the device (NLA_U8)
- * @DCB_ATTR_PFC_CFG: priority flow control configuration (NLA_NESTED)
- * @DCB_ATTR_NUM_TC: number of traffic classes supported in the device (NLA_U8)
- * @DCB_ATTR_PG_CFG: priority group configuration (NLA_NESTED)
- * @DCB_ATTR_SET_ALL: bool to commit changes to hardware or not (NLA_U8)
- * @DCB_ATTR_PERM_HWADDR: MAC address of the physical device (NLA_NESTED)
- * @DCB_ATTR_CAP: DCB capabilities of the device (NLA_NESTED)
- * @DCB_ATTR_NUMTCS: number of traffic classes supported (NLA_NESTED)
- * @DCB_ATTR_BCN: backward congestion notification configuration (NLA_NESTED)
- * @DCB_ATTR_IEEE: IEEE 802.1Qaz supported attributes (NLA_NESTED)
- * @DCB_ATTR_DCBX: DCBX engine configuration in the device (NLA_U8)
- * @DCB_ATTR_FEATCFG: DCBX features flags (NLA_NESTED)
- * @DCB_ATTR_CEE: CEE std supported attributes (NLA_NESTED)
- */
-enum dcbnl_attrs {
-	DCB_ATTR_UNDEFINED,
-
-	DCB_ATTR_IFNAME,
-	DCB_ATTR_STATE,
-	DCB_ATTR_PFC_STATE,
-	DCB_ATTR_PFC_CFG,
-	DCB_ATTR_NUM_TC,
-	DCB_ATTR_PG_CFG,
-	DCB_ATTR_SET_ALL,
-	DCB_ATTR_PERM_HWADDR,
-	DCB_ATTR_CAP,
-	DCB_ATTR_NUMTCS,
-	DCB_ATTR_BCN,
-	DCB_ATTR_APP,
-
-	/* IEEE std attributes */
-	DCB_ATTR_IEEE,
-
-	DCB_ATTR_DCBX,
-	DCB_ATTR_FEATCFG,
-
-	/* CEE nested attributes */
-	DCB_ATTR_CEE,
-
-	__DCB_ATTR_ENUM_MAX,
-	DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum ieee_attrs - IEEE 802.1Qaz get/set attributes
- *
- * @DCB_ATTR_IEEE_UNSPEC: unspecified
- * @DCB_ATTR_IEEE_ETS: negotiated ETS configuration
- * @DCB_ATTR_IEEE_PFC: negotiated PFC configuration
- * @DCB_ATTR_IEEE_APP_TABLE: negotiated APP configuration
- * @DCB_ATTR_IEEE_PEER_ETS: peer ETS configuration - get only
- * @DCB_ATTR_IEEE_PEER_PFC: peer PFC configuration - get only
- * @DCB_ATTR_IEEE_PEER_APP: peer APP tlv - get only
- */
-enum ieee_attrs {
-	DCB_ATTR_IEEE_UNSPEC,
-	DCB_ATTR_IEEE_ETS,
-	DCB_ATTR_IEEE_PFC,
-	DCB_ATTR_IEEE_APP_TABLE,
-	DCB_ATTR_IEEE_PEER_ETS,
-	DCB_ATTR_IEEE_PEER_PFC,
-	DCB_ATTR_IEEE_PEER_APP,
-	DCB_ATTR_IEEE_MAXRATE,
-	__DCB_ATTR_IEEE_MAX
-};
-#define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1)
-
-enum ieee_attrs_app {
-	DCB_ATTR_IEEE_APP_UNSPEC,
-	DCB_ATTR_IEEE_APP,
-	__DCB_ATTR_IEEE_APP_MAX
-};
-#define DCB_ATTR_IEEE_APP_MAX (__DCB_ATTR_IEEE_APP_MAX - 1)
-
-/**
- * enum cee_attrs - CEE DCBX get attributes.
- *
- * @DCB_ATTR_CEE_UNSPEC: unspecified
- * @DCB_ATTR_CEE_PEER_PG: peer PG configuration - get only
- * @DCB_ATTR_CEE_PEER_PFC: peer PFC configuration - get only
- * @DCB_ATTR_CEE_PEER_APP_TABLE: peer APP tlv - get only
- * @DCB_ATTR_CEE_TX_PG: TX PG configuration (DCB_CMD_PGTX_GCFG)
- * @DCB_ATTR_CEE_RX_PG: RX PG configuration (DCB_CMD_PGRX_GCFG)
- * @DCB_ATTR_CEE_PFC: PFC configuration (DCB_CMD_PFC_GCFG)
- * @DCB_ATTR_CEE_APP_TABLE: APP configuration (multi DCB_CMD_GAPP)
- * @DCB_ATTR_CEE_FEAT: DCBX features flags (DCB_CMD_GFEATCFG)
- *
- * An aggregated collection of the cee std negotiated parameters.
- */
-enum cee_attrs {
-	DCB_ATTR_CEE_UNSPEC,
-	DCB_ATTR_CEE_PEER_PG,
-	DCB_ATTR_CEE_PEER_PFC,
-	DCB_ATTR_CEE_PEER_APP_TABLE,
-	DCB_ATTR_CEE_TX_PG,
-	DCB_ATTR_CEE_RX_PG,
-	DCB_ATTR_CEE_PFC,
-	DCB_ATTR_CEE_APP_TABLE,
-	DCB_ATTR_CEE_FEAT,
-	__DCB_ATTR_CEE_MAX
-};
-#define DCB_ATTR_CEE_MAX (__DCB_ATTR_CEE_MAX - 1)
-
-enum peer_app_attr {
-	DCB_ATTR_CEE_PEER_APP_UNSPEC,
-	DCB_ATTR_CEE_PEER_APP_INFO,
-	DCB_ATTR_CEE_PEER_APP,
-	__DCB_ATTR_CEE_PEER_APP_MAX
-};
-#define DCB_ATTR_CEE_PEER_APP_MAX (__DCB_ATTR_CEE_PEER_APP_MAX - 1)
-
-enum cee_attrs_app {
-	DCB_ATTR_CEE_APP_UNSPEC,
-	DCB_ATTR_CEE_APP,
-	__DCB_ATTR_CEE_APP_MAX
-};
-#define DCB_ATTR_CEE_APP_MAX (__DCB_ATTR_CEE_APP_MAX - 1)
-
-/**
- * enum dcbnl_pfc_attrs - DCB Priority Flow Control user priority nested attrs
- *
- * @DCB_PFC_UP_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_PFC_UP_ATTR_0: Priority Flow Control value for User Priority 0 (NLA_U8)
- * @DCB_PFC_UP_ATTR_1: Priority Flow Control value for User Priority 1 (NLA_U8)
- * @DCB_PFC_UP_ATTR_2: Priority Flow Control value for User Priority 2 (NLA_U8)
- * @DCB_PFC_UP_ATTR_3: Priority Flow Control value for User Priority 3 (NLA_U8)
- * @DCB_PFC_UP_ATTR_4: Priority Flow Control value for User Priority 4 (NLA_U8)
- * @DCB_PFC_UP_ATTR_5: Priority Flow Control value for User Priority 5 (NLA_U8)
- * @DCB_PFC_UP_ATTR_6: Priority Flow Control value for User Priority 6 (NLA_U8)
- * @DCB_PFC_UP_ATTR_7: Priority Flow Control value for User Priority 7 (NLA_U8)
- * @DCB_PFC_UP_ATTR_MAX: highest attribute number currently defined
- * @DCB_PFC_UP_ATTR_ALL: apply to all priority flow control attrs (NLA_FLAG)
- *
- */
-enum dcbnl_pfc_up_attrs {
-	DCB_PFC_UP_ATTR_UNDEFINED,
-
-	DCB_PFC_UP_ATTR_0,
-	DCB_PFC_UP_ATTR_1,
-	DCB_PFC_UP_ATTR_2,
-	DCB_PFC_UP_ATTR_3,
-	DCB_PFC_UP_ATTR_4,
-	DCB_PFC_UP_ATTR_5,
-	DCB_PFC_UP_ATTR_6,
-	DCB_PFC_UP_ATTR_7,
-	DCB_PFC_UP_ATTR_ALL,
-
-	__DCB_PFC_UP_ATTR_ENUM_MAX,
-	DCB_PFC_UP_ATTR_MAX = __DCB_PFC_UP_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_pg_attrs - DCB Priority Group attributes
- *
- * @DCB_PG_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_PG_ATTR_TC_0: Priority Group Traffic Class 0 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_1: Priority Group Traffic Class 1 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_2: Priority Group Traffic Class 2 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_3: Priority Group Traffic Class 3 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_4: Priority Group Traffic Class 4 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_5: Priority Group Traffic Class 5 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_6: Priority Group Traffic Class 6 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_7: Priority Group Traffic Class 7 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_MAX: highest attribute number currently defined
- * @DCB_PG_ATTR_TC_ALL: apply to all traffic classes (NLA_NESTED)
- * @DCB_PG_ATTR_BW_ID_0: Percent of link bandwidth for Priority Group 0 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_1: Percent of link bandwidth for Priority Group 1 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_2: Percent of link bandwidth for Priority Group 2 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_3: Percent of link bandwidth for Priority Group 3 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_4: Percent of link bandwidth for Priority Group 4 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_5: Percent of link bandwidth for Priority Group 5 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_6: Percent of link bandwidth for Priority Group 6 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_7: Percent of link bandwidth for Priority Group 7 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_MAX: highest attribute number currently defined
- * @DCB_PG_ATTR_BW_ID_ALL: apply to all priority groups (NLA_FLAG)
- *
- */
-enum dcbnl_pg_attrs {
-	DCB_PG_ATTR_UNDEFINED,
-
-	DCB_PG_ATTR_TC_0,
-	DCB_PG_ATTR_TC_1,
-	DCB_PG_ATTR_TC_2,
-	DCB_PG_ATTR_TC_3,
-	DCB_PG_ATTR_TC_4,
-	DCB_PG_ATTR_TC_5,
-	DCB_PG_ATTR_TC_6,
-	DCB_PG_ATTR_TC_7,
-	DCB_PG_ATTR_TC_MAX,
-	DCB_PG_ATTR_TC_ALL,
-
-	DCB_PG_ATTR_BW_ID_0,
-	DCB_PG_ATTR_BW_ID_1,
-	DCB_PG_ATTR_BW_ID_2,
-	DCB_PG_ATTR_BW_ID_3,
-	DCB_PG_ATTR_BW_ID_4,
-	DCB_PG_ATTR_BW_ID_5,
-	DCB_PG_ATTR_BW_ID_6,
-	DCB_PG_ATTR_BW_ID_7,
-	DCB_PG_ATTR_BW_ID_MAX,
-	DCB_PG_ATTR_BW_ID_ALL,
-
-	__DCB_PG_ATTR_ENUM_MAX,
-	DCB_PG_ATTR_MAX = __DCB_PG_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_tc_attrs - DCB Traffic Class attributes
- *
- * @DCB_TC_ATTR_PARAM_UNDEFINED: unspecified attribute to catch errors
- * @DCB_TC_ATTR_PARAM_PGID: (NLA_U8) Priority group the traffic class belongs to
- *                          Valid values are:  0-7
- * @DCB_TC_ATTR_PARAM_UP_MAPPING: (NLA_U8) Traffic class to user priority map
- *                                Some devices may not support changing the
- *                                user priority map of a TC.
- * @DCB_TC_ATTR_PARAM_STRICT_PRIO: (NLA_U8) Strict priority setting
- *                                 0 - none
- *                                 1 - group strict
- *                                 2 - link strict
- * @DCB_TC_ATTR_PARAM_BW_PCT: optional - (NLA_U8) If supported by the device and
- *                            not configured to use link strict priority,
- *                            this is the percentage of bandwidth of the
- *                            priority group this traffic class belongs to
- * @DCB_TC_ATTR_PARAM_ALL: (NLA_FLAG) all traffic class parameters
- *
- */
-enum dcbnl_tc_attrs {
-	DCB_TC_ATTR_PARAM_UNDEFINED,
-
-	DCB_TC_ATTR_PARAM_PGID,
-	DCB_TC_ATTR_PARAM_UP_MAPPING,
-	DCB_TC_ATTR_PARAM_STRICT_PRIO,
-	DCB_TC_ATTR_PARAM_BW_PCT,
-	DCB_TC_ATTR_PARAM_ALL,
-
-	__DCB_TC_ATTR_PARAM_ENUM_MAX,
-	DCB_TC_ATTR_PARAM_MAX = __DCB_TC_ATTR_PARAM_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_cap_attrs - DCB Capability attributes
- *
- * @DCB_CAP_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_CAP_ATTR_ALL: (NLA_FLAG) all capability parameters
- * @DCB_CAP_ATTR_PG: (NLA_U8) device supports Priority Groups
- * @DCB_CAP_ATTR_PFC: (NLA_U8) device supports Priority Flow Control
- * @DCB_CAP_ATTR_UP2TC: (NLA_U8) device supports user priority to
- *                               traffic class mapping
- * @DCB_CAP_ATTR_PG_TCS: (NLA_U8) bitmap where each bit represents a
- *                                number of traffic classes the device
- *                                can be configured to use for Priority Groups
- * @DCB_CAP_ATTR_PFC_TCS: (NLA_U8) bitmap where each bit represents a
- *                                 number of traffic classes the device can be
- *                                 configured to use for Priority Flow Control
- * @DCB_CAP_ATTR_GSP: (NLA_U8) device supports group strict priority
- * @DCB_CAP_ATTR_BCN: (NLA_U8) device supports Backwards Congestion
- *                             Notification
- * @DCB_CAP_ATTR_DCBX: (NLA_U8) device supports DCBX engine
- *
- */
-enum dcbnl_cap_attrs {
-	DCB_CAP_ATTR_UNDEFINED,
-	DCB_CAP_ATTR_ALL,
-	DCB_CAP_ATTR_PG,
-	DCB_CAP_ATTR_PFC,
-	DCB_CAP_ATTR_UP2TC,
-	DCB_CAP_ATTR_PG_TCS,
-	DCB_CAP_ATTR_PFC_TCS,
-	DCB_CAP_ATTR_GSP,
-	DCB_CAP_ATTR_BCN,
-	DCB_CAP_ATTR_DCBX,
-
-	__DCB_CAP_ATTR_ENUM_MAX,
-	DCB_CAP_ATTR_MAX = __DCB_CAP_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * DCBX capability flags
- *
- * @DCB_CAP_DCBX_HOST: DCBX negotiation is performed by the host LLDP agent.
- *                     'set' routines are used to configure the device with
- *                     the negotiated parameters
- *
- * @DCB_CAP_DCBX_LLD_MANAGED: DCBX negotiation is not performed in the host but
- *                            by another entity
- *                            'get' routines are used to retrieve the
- *                            negotiated parameters
- *                            'set' routines can be used to set the initial
- *                            negotiation configuration
- *
- * @DCB_CAP_DCBX_VER_CEE: for a non-host DCBX engine, indicates the engine
- *                        supports the CEE protocol flavor
- *
- * @DCB_CAP_DCBX_VER_IEEE: for a non-host DCBX engine, indicates the engine
- *                         supports the IEEE protocol flavor
- *
- * @DCB_CAP_DCBX_STATIC: for a non-host DCBX engine, indicates the engine
- *                       supports static configuration (i.e no actual
- *                       negotiation is performed negotiated parameters equal
- *                       the initial configuration)
- *
- */
-#define DCB_CAP_DCBX_HOST		0x01
-#define DCB_CAP_DCBX_LLD_MANAGED	0x02
-#define DCB_CAP_DCBX_VER_CEE		0x04
-#define DCB_CAP_DCBX_VER_IEEE		0x08
-#define DCB_CAP_DCBX_STATIC		0x10
-
-/**
- * enum dcbnl_numtcs_attrs - number of traffic classes
- *
- * @DCB_NUMTCS_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_NUMTCS_ATTR_ALL: (NLA_FLAG) all traffic class attributes
- * @DCB_NUMTCS_ATTR_PG: (NLA_U8) number of traffic classes used for
- *                               priority groups
- * @DCB_NUMTCS_ATTR_PFC: (NLA_U8) number of traffic classes which can
- *                                support priority flow control
- */
-enum dcbnl_numtcs_attrs {
-	DCB_NUMTCS_ATTR_UNDEFINED,
-	DCB_NUMTCS_ATTR_ALL,
-	DCB_NUMTCS_ATTR_PG,
-	DCB_NUMTCS_ATTR_PFC,
-
-	__DCB_NUMTCS_ATTR_ENUM_MAX,
-	DCB_NUMTCS_ATTR_MAX = __DCB_NUMTCS_ATTR_ENUM_MAX - 1,
-};
-
-enum dcbnl_bcn_attrs{
-	DCB_BCN_ATTR_UNDEFINED = 0,
-
-	DCB_BCN_ATTR_RP_0,
-	DCB_BCN_ATTR_RP_1,
-	DCB_BCN_ATTR_RP_2,
-	DCB_BCN_ATTR_RP_3,
-	DCB_BCN_ATTR_RP_4,
-	DCB_BCN_ATTR_RP_5,
-	DCB_BCN_ATTR_RP_6,
-	DCB_BCN_ATTR_RP_7,
-	DCB_BCN_ATTR_RP_ALL,
-
-	DCB_BCN_ATTR_BCNA_0,
-	DCB_BCN_ATTR_BCNA_1,
-	DCB_BCN_ATTR_ALPHA,
-	DCB_BCN_ATTR_BETA,
-	DCB_BCN_ATTR_GD,
-	DCB_BCN_ATTR_GI,
-	DCB_BCN_ATTR_TMAX,
-	DCB_BCN_ATTR_TD,
-	DCB_BCN_ATTR_RMIN,
-	DCB_BCN_ATTR_W,
-	DCB_BCN_ATTR_RD,
-	DCB_BCN_ATTR_RU,
-	DCB_BCN_ATTR_WRTT,
-	DCB_BCN_ATTR_RI,
-	DCB_BCN_ATTR_C,
-	DCB_BCN_ATTR_ALL,
-
-	__DCB_BCN_ATTR_ENUM_MAX,
-	DCB_BCN_ATTR_MAX = __DCB_BCN_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcb_general_attr_values - general DCB attribute values
- *
- * @DCB_ATTR_UNDEFINED: value used to indicate an attribute is not supported
- *
- */
-enum dcb_general_attr_values {
-	DCB_ATTR_VALUE_UNDEFINED = 0xff
-};
-
-#define DCB_APP_IDTYPE_ETHTYPE	0x00
-#define DCB_APP_IDTYPE_PORTNUM	0x01
-enum dcbnl_app_attrs {
-	DCB_APP_ATTR_UNDEFINED,
-
-	DCB_APP_ATTR_IDTYPE,
-	DCB_APP_ATTR_ID,
-	DCB_APP_ATTR_PRIORITY,
-
-	__DCB_APP_ATTR_ENUM_MAX,
-	DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_featcfg_attrs - features conifiguration flags
- *
- * @DCB_FEATCFG_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_FEATCFG_ATTR_ALL: (NLA_FLAG) all features configuration attributes
- * @DCB_FEATCFG_ATTR_PG: (NLA_U8) configuration flags for priority groups
- * @DCB_FEATCFG_ATTR_PFC: (NLA_U8) configuration flags for priority
- *                                 flow control
- * @DCB_FEATCFG_ATTR_APP: (NLA_U8) configuration flags for application TLV
- *
- */
-#define DCB_FEATCFG_ERROR	0x01	/* error in feature resolution */
-#define DCB_FEATCFG_ENABLE	0x02	/* enable feature */
-#define DCB_FEATCFG_WILLING	0x04	/* feature is willing */
-#define DCB_FEATCFG_ADVERTISE	0x08	/* advertise feature */
-enum dcbnl_featcfg_attrs {
-	DCB_FEATCFG_ATTR_UNDEFINED,
-	DCB_FEATCFG_ATTR_ALL,
-	DCB_FEATCFG_ATTR_PG,
-	DCB_FEATCFG_ATTR_PFC,
-	DCB_FEATCFG_ATTR_APP,
-
-	__DCB_FEATCFG_ATTR_ENUM_MAX,
-	DCB_FEATCFG_ATTR_MAX = __DCB_FEATCFG_ATTR_ENUM_MAX - 1,
-};
-
-#endif /* __LINUX_DCBNL_H__ */
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index d16294e2a118..439ff698000a 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -1,239 +1,6 @@
 #ifndef _LINUX_DCCP_H
 #define _LINUX_DCCP_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/**
- * struct dccp_hdr - generic part of DCCP packet header
- *
- * @dccph_sport - Relevant port on the endpoint that sent this packet
- * @dccph_dport - Relevant port on the other endpoint
- * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words
- * @dccph_ccval - Used by the HC-Sender CCID
- * @dccph_cscov - Parts of the packet that are covered by the Checksum field
- * @dccph_checksum - Internet checksum, depends on dccph_cscov
- * @dccph_x - 0 = 24 bit sequence number, 1 = 48
- * @dccph_type - packet type, see DCCP_PKT_ prefixed macros
- * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x
- */
-struct dccp_hdr {
-	__be16	dccph_sport,
-		dccph_dport;
-	__u8	dccph_doff;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	dccph_cscov:4,
-		dccph_ccval:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	dccph_ccval:4,
-		dccph_cscov:4;
-#else
-#error  "Adjust your <asm/byteorder.h> defines"
-#endif
-	__sum16	dccph_checksum;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	dccph_x:1,
-		dccph_type:4,
-		dccph_reserved:3;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	dccph_reserved:3,
-		dccph_type:4,
-		dccph_x:1;
-#else
-#error  "Adjust your <asm/byteorder.h> defines"
-#endif
-	__u8	dccph_seq2;
-	__be16	dccph_seq;
-};
-
-/**
- * struct dccp_hdr_ext - the low bits of a 48 bit seq packet
- *
- * @dccph_seq_low - low 24 bits of a 48 bit seq packet
- */
-struct dccp_hdr_ext {
-	__be32	dccph_seq_low;
-};
-
-/**
- * struct dccp_hdr_request - Connection initiation request header
- *
- * @dccph_req_service - Service to which the client app wants to connect
- */
-struct dccp_hdr_request {
-	__be32	dccph_req_service;
-};
-/**
- * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets
- *
- * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
- * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
- */
-struct dccp_hdr_ack_bits {
-	__be16	dccph_reserved1;
-	__be16	dccph_ack_nr_high;
-	__be32	dccph_ack_nr_low;
-};
-/**
- * struct dccp_hdr_response - Connection initiation response header
- *
- * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
- * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
- */
-struct dccp_hdr_response {
-	struct dccp_hdr_ack_bits	dccph_resp_ack;
-	__be32				dccph_resp_service;
-};
-
-/**
- * struct dccp_hdr_reset - Unconditionally shut down a connection
- *
- * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
- * @dccph_reset_code - one of %dccp_reset_codes
- * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
- */
-struct dccp_hdr_reset {
-	struct dccp_hdr_ack_bits	dccph_reset_ack;
-	__u8				dccph_reset_code,
-					dccph_reset_data[3];
-};
-
-enum dccp_pkt_type {
-	DCCP_PKT_REQUEST = 0,
-	DCCP_PKT_RESPONSE,
-	DCCP_PKT_DATA,
-	DCCP_PKT_ACK,
-	DCCP_PKT_DATAACK,
-	DCCP_PKT_CLOSEREQ,
-	DCCP_PKT_CLOSE,
-	DCCP_PKT_RESET,
-	DCCP_PKT_SYNC,
-	DCCP_PKT_SYNCACK,
-	DCCP_PKT_INVALID,
-};
-
-#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID
-
-static inline unsigned int dccp_packet_hdr_len(const __u8 type)
-{
-	if (type == DCCP_PKT_DATA)
-		return 0;
-	if (type == DCCP_PKT_DATAACK	||
-	    type == DCCP_PKT_ACK	||
-	    type == DCCP_PKT_SYNC	||
-	    type == DCCP_PKT_SYNCACK	||
-	    type == DCCP_PKT_CLOSE	||
-	    type == DCCP_PKT_CLOSEREQ)
-		return sizeof(struct dccp_hdr_ack_bits);
-	if (type == DCCP_PKT_REQUEST)
-		return sizeof(struct dccp_hdr_request);
-	if (type == DCCP_PKT_RESPONSE)
-		return sizeof(struct dccp_hdr_response);
-	return sizeof(struct dccp_hdr_reset);
-}
-enum dccp_reset_codes {
-	DCCP_RESET_CODE_UNSPECIFIED = 0,
-	DCCP_RESET_CODE_CLOSED,
-	DCCP_RESET_CODE_ABORTED,
-	DCCP_RESET_CODE_NO_CONNECTION,
-	DCCP_RESET_CODE_PACKET_ERROR,
-	DCCP_RESET_CODE_OPTION_ERROR,
-	DCCP_RESET_CODE_MANDATORY_ERROR,
-	DCCP_RESET_CODE_CONNECTION_REFUSED,
-	DCCP_RESET_CODE_BAD_SERVICE_CODE,
-	DCCP_RESET_CODE_TOO_BUSY,
-	DCCP_RESET_CODE_BAD_INIT_COOKIE,
-	DCCP_RESET_CODE_AGGRESSION_PENALTY,
-
-	DCCP_MAX_RESET_CODES		/* Leave at the end!  */
-};
-
-/* DCCP options */
-enum {
-	DCCPO_PADDING = 0,
-	DCCPO_MANDATORY = 1,
-	DCCPO_MIN_RESERVED = 3,
-	DCCPO_MAX_RESERVED = 31,
-	DCCPO_CHANGE_L = 32,
-	DCCPO_CONFIRM_L = 33,
-	DCCPO_CHANGE_R = 34,
-	DCCPO_CONFIRM_R = 35,
-	DCCPO_NDP_COUNT = 37,
-	DCCPO_ACK_VECTOR_0 = 38,
-	DCCPO_ACK_VECTOR_1 = 39,
-	DCCPO_TIMESTAMP = 41,
-	DCCPO_TIMESTAMP_ECHO = 42,
-	DCCPO_ELAPSED_TIME = 43,
-	DCCPO_MAX = 45,
-	DCCPO_MIN_RX_CCID_SPECIFIC = 128,	/* from sender to receiver */
-	DCCPO_MAX_RX_CCID_SPECIFIC = 191,
-	DCCPO_MIN_TX_CCID_SPECIFIC = 192,	/* from receiver to sender */
-	DCCPO_MAX_TX_CCID_SPECIFIC = 255,
-};
-/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
-#define DCCP_SINGLE_OPT_MAXLEN	253
-
-/* DCCP CCIDS */
-enum {
-	DCCPC_CCID2 = 2,
-	DCCPC_CCID3 = 3,
-};
-
-/* DCCP features (RFC 4340 section 6.4) */
-enum dccp_feature_numbers {
-	DCCPF_RESERVED = 0,
-	DCCPF_CCID = 1,
-	DCCPF_SHORT_SEQNOS = 2,
-	DCCPF_SEQUENCE_WINDOW = 3,
-	DCCPF_ECN_INCAPABLE = 4,
-	DCCPF_ACK_RATIO = 5,
-	DCCPF_SEND_ACK_VECTOR = 6,
-	DCCPF_SEND_NDP_COUNT = 7,
-	DCCPF_MIN_CSUM_COVER = 8,
-	DCCPF_DATA_CHECKSUM = 9,
-	/* 10-127 reserved */
-	DCCPF_MIN_CCID_SPECIFIC = 128,
-	DCCPF_SEND_LEV_RATE = 192,	/* RFC 4342, sec. 8.4 */
-	DCCPF_MAX_CCID_SPECIFIC = 255,
-};
-
-/* DCCP socket control message types for cmsg */
-enum dccp_cmsg_type {
-	DCCP_SCM_PRIORITY = 1,
-	DCCP_SCM_QPOLICY_MAX = 0xFFFF,
-	/* ^-- Up to here reserved exclusively for qpolicy parameters */
-	DCCP_SCM_MAX
-};
-
-/* DCCP priorities for outgoing/queued packets */
-enum dccp_packet_dequeueing_policy {
-	DCCPQ_POLICY_SIMPLE,
-	DCCPQ_POLICY_PRIO,
-	DCCPQ_POLICY_MAX
-};
-
-/* DCCP socket options */
-#define DCCP_SOCKOPT_PACKET_SIZE	1 /* XXX deprecated, without effect */
-#define DCCP_SOCKOPT_SERVICE		2
-#define DCCP_SOCKOPT_CHANGE_L		3
-#define DCCP_SOCKOPT_CHANGE_R		4
-#define DCCP_SOCKOPT_GET_CUR_MPS	5
-#define DCCP_SOCKOPT_SERVER_TIMEWAIT	6
-#define DCCP_SOCKOPT_SEND_CSCOV		10
-#define DCCP_SOCKOPT_RECV_CSCOV		11
-#define DCCP_SOCKOPT_AVAILABLE_CCIDS	12
-#define DCCP_SOCKOPT_CCID		13
-#define DCCP_SOCKOPT_TX_CCID		14
-#define DCCP_SOCKOPT_RX_CCID		15
-#define DCCP_SOCKOPT_QPOLICY_ID		16
-#define DCCP_SOCKOPT_QPOLICY_TXQLEN	17
-#define DCCP_SOCKOPT_CCID_RX_INFO	128
-#define DCCP_SOCKOPT_CCID_TX_INFO	192
-
-/* maximum number of services provided on the same listening port */
-#define DCCP_SERVICE_LIST_MAX_LEN      32
-
-#ifdef __KERNEL__
 
 #include <linux/in.h>
 #include <linux/interrupt.h>
@@ -246,6 +13,7 @@ enum dccp_packet_dequeueing_policy {
 #include <net/inet_sock.h>
 #include <net/inet_timewait_sock.h>
 #include <net/tcp_states.h>
+#include <uapi/linux/dccp.h>
 
 enum dccp_state {
 	DCCP_OPEN	     = TCP_ESTABLISHED,
@@ -551,6 +319,4 @@ static inline const char *dccp_role(const struct sock *sk)
 
 extern void dccp_syn_ack_timeout(struct sock *sk, struct request_sock *req);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_DCCP_H */
diff --git a/include/linux/dlm.h b/include/linux/dlm.h
index 520152411cd1..1d47dcce11e1 100644
--- a/include/linux/dlm.h
+++ b/include/linux/dlm.h
@@ -10,68 +10,11 @@
 **
 *******************************************************************************
 ******************************************************************************/
-
 #ifndef __DLM_DOT_H__
 #define __DLM_DOT_H__
 
-/*
- * Interface to Distributed Lock Manager (DLM)
- * routines and structures to use DLM lockspaces
- */
-
-/* Lock levels and flags are here */
-#include <linux/dlmconstants.h>
-#include <linux/types.h>
-
-typedef void dlm_lockspace_t;
-
-/*
- * Lock status block
- *
- * Use this structure to specify the contents of the lock value block.  For a
- * conversion request, this structure is used to specify the lock ID of the
- * lock.  DLM writes the status of the lock request and the lock ID assigned
- * to the request in the lock status block.
- *
- * sb_lkid: the returned lock ID.  It is set on new (non-conversion) requests.
- * It is available when dlm_lock returns.
- *
- * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
- * shown for the DLM_LKF_VALBLK flag.
- *
- * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
- * it was first demoted to NL to avoid conversion deadlock.
- * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
- *
- * sb_status: the returned status of the lock request set prior to AST
- * execution.  Possible return values:
- *
- * 0 if lock request was successful
- * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
- * -DLM_EUNLOCK if unlock request was successful
- * -DLM_ECANCEL if a cancel completed successfully
- * -EDEADLK if a deadlock was detected
- * -ETIMEDOUT if the lock request was canceled due to a timeout
- */
-
-#define DLM_SBF_DEMOTED		0x01
-#define DLM_SBF_VALNOTVALID	0x02
-#define DLM_SBF_ALTMODE		0x04
+#include <uapi/linux/dlm.h>
 
-struct dlm_lksb {
-	int 	 sb_status;
-	__u32	 sb_lkid;
-	char 	 sb_flags;
-	char *	 sb_lvbptr;
-};
-
-/* dlm_new_lockspace() flags */
-
-#define DLM_LSFL_TIMEWARN	0x00000002
-#define DLM_LSFL_FS     	0x00000004
-#define DLM_LSFL_NEWEXCL     	0x00000008
-
-#ifdef __KERNEL__
 
 struct dlm_slot {
 	int nodeid; /* 1 to MAX_INT */
@@ -226,7 +169,4 @@ int dlm_unlock(dlm_lockspace_t *lockspace,
 	       struct dlm_lksb *lksb,
 	       void *astarg);
 
-#endif				/* __KERNEL__ */
-
 #endif				/* __DLM_DOT_H__ */
-
diff --git a/include/linux/dlm_device.h b/include/linux/dlm_device.h
deleted file mode 100644
index 3060783c4191..000000000000
--- a/include/linux/dlm_device.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/******************************************************************************
-*******************************************************************************
-**
-**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
-**  Copyright (C) 2004-2007 Red Hat, Inc.  All rights reserved.
-**
-**  This copyrighted material is made available to anyone wishing to use,
-**  modify, copy, or redistribute it subject to the terms and conditions
-**  of the GNU General Public License v.2.
-**
-*******************************************************************************
-******************************************************************************/
-
-#ifndef _LINUX_DLM_DEVICE_H
-#define _LINUX_DLM_DEVICE_H
-
-/* This is the device interface for dlm, most users will use a library
- * interface.
- */
-
-#include <linux/dlm.h>
-#include <linux/types.h>
-
-#define DLM_USER_LVB_LEN	32
-
-/* Version of the device interface */
-#define DLM_DEVICE_VERSION_MAJOR 6
-#define DLM_DEVICE_VERSION_MINOR 0
-#define DLM_DEVICE_VERSION_PATCH 1
-
-/* struct passed to the lock write */
-struct dlm_lock_params {
-	__u8 mode;
-	__u8 namelen;
-	__u16 unused;
-	__u32 flags;
-	__u32 lkid;
-	__u32 parent;
-	__u64 xid;
-	__u64 timeout;
-	void __user *castparam;
-	void __user *castaddr;
-	void __user *bastparam;
-	void __user *bastaddr;
-	struct dlm_lksb __user *lksb;
-	char lvb[DLM_USER_LVB_LEN];
-	char name[0];
-};
-
-struct dlm_lspace_params {
-	__u32 flags;
-	__u32 minor;
-	char name[0];
-};
-
-struct dlm_purge_params {
-	__u32 nodeid;
-	__u32 pid;
-};
-
-struct dlm_write_request {
-	__u32 version[3];
-	__u8 cmd;
-	__u8 is64bit;
-	__u8 unused[2];
-
-	union  {
-		struct dlm_lock_params   lock;
-		struct dlm_lspace_params lspace;
-		struct dlm_purge_params  purge;
-	} i;
-};
-
-struct dlm_device_version {
-	__u32 version[3];
-};
-
-/* struct read from the "device" fd,
-   consists mainly of userspace pointers for the library to use */
-
-struct dlm_lock_result {
-	__u32 version[3];
-	__u32 length;
-	void __user * user_astaddr;
-	void __user * user_astparam;
-	struct dlm_lksb __user * user_lksb;
-	struct dlm_lksb lksb;
-	__u8 bast_mode;
-	__u8 unused[3];
-	/* Offsets may be zero if no data is present */
-	__u32 lvb_offset;
-};
-
-/* Commands passed to the device */
-#define DLM_USER_LOCK         1
-#define DLM_USER_UNLOCK       2
-#define DLM_USER_QUERY        3
-#define DLM_USER_CREATE_LOCKSPACE  4
-#define DLM_USER_REMOVE_LOCKSPACE  5
-#define DLM_USER_PURGE        6
-#define DLM_USER_DEADLOCK     7
-
-/* Lockspace flags */
-#define DLM_USER_LSFLG_AUTOFREE   1
-#define DLM_USER_LSFLG_FORCEFREE  2
-
-#endif
-
diff --git a/include/linux/dlm_netlink.h b/include/linux/dlm_netlink.h
deleted file mode 100644
index 647c8ef27227..000000000000
--- a/include/linux/dlm_netlink.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2007 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- */
-
-#ifndef _DLM_NETLINK_H
-#define _DLM_NETLINK_H
-
-#include <linux/types.h>
-
-enum {
-	DLM_STATUS_WAITING = 1,
-	DLM_STATUS_GRANTED = 2,
-	DLM_STATUS_CONVERT = 3,
-};
-
-#define DLM_LOCK_DATA_VERSION 1
-
-struct dlm_lock_data {
-	__u16 version;
-	__u32 lockspace_id;
-	int nodeid;
-	int ownpid;
-	__u32 id;
-	__u32 remid;
-	__u64 xid;
-	__s8 status;
-	__s8 grmode;
-	__s8 rqmode;
-	unsigned long timestamp;
-	int resource_namelen;
-	char resource_name[DLM_RESNAME_MAXLEN];
-};
-
-enum {
-	DLM_CMD_UNSPEC = 0,
-	DLM_CMD_HELLO,		/* user->kernel */
-	DLM_CMD_TIMEOUT,	/* kernel->user */
-	__DLM_CMD_MAX,
-};
-
-#define DLM_CMD_MAX (__DLM_CMD_MAX - 1)
-
-enum {
-	DLM_TYPE_UNSPEC = 0,
-	DLM_TYPE_LOCK,
-	__DLM_TYPE_MAX,
-};
-
-#define DLM_TYPE_MAX (__DLM_TYPE_MAX - 1)
-
-#define DLM_GENL_VERSION 0x1
-#define DLM_GENL_NAME "DLM"
-
-#endif /* _DLM_NETLINK_H */
diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h
index 3b1cc1be419f..95ad387a7769 100644
--- a/include/linux/dlm_plock.h
+++ b/include/linux/dlm_plock.h
@@ -5,50 +5,15 @@
  * modify, copy, or redistribute it subject to the terms and conditions
  * of the GNU General Public License v.2.
  */
-
 #ifndef __DLM_PLOCK_DOT_H__
 #define __DLM_PLOCK_DOT_H__
 
-#include <linux/types.h>
-
-#define DLM_PLOCK_MISC_NAME		"dlm_plock"
-
-#define DLM_PLOCK_VERSION_MAJOR	1
-#define DLM_PLOCK_VERSION_MINOR	2
-#define DLM_PLOCK_VERSION_PATCH	0
-
-enum {
-	DLM_PLOCK_OP_LOCK = 1,
-	DLM_PLOCK_OP_UNLOCK,
-	DLM_PLOCK_OP_GET,
-};
+#include <uapi/linux/dlm_plock.h>
 
-#define DLM_PLOCK_FL_CLOSE 1
-
-struct dlm_plock_info {
-	__u32 version[3];
-	__u8 optype;
-	__u8 ex;
-	__u8 wait;
-	__u8 flags;
-	__u32 pid;
-	__s32 nodeid;
-	__s32 rv;
-	__u32 fsid;
-	__u64 number;
-	__u64 start;
-	__u64 end;
-	__u64 owner;
-};
-
-#ifdef __KERNEL__
 int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
 		int cmd, struct file_lock *fl);
 int dlm_posix_unlock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
 		struct file_lock *fl);
 int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file,
 		struct file_lock *fl);
-#endif /* __KERNEL__ */
-
 #endif
-
diff --git a/include/linux/dlmconstants.h b/include/linux/dlmconstants.h
deleted file mode 100644
index 47bf08dc7566..000000000000
--- a/include/linux/dlmconstants.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/******************************************************************************
-*******************************************************************************
-**
-**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
-**  Copyright (C) 2004-2007 Red Hat, Inc.  All rights reserved.
-**
-**  This copyrighted material is made available to anyone wishing to use,
-**  modify, copy, or redistribute it subject to the terms and conditions
-**  of the GNU General Public License v.2.
-**
-*******************************************************************************
-******************************************************************************/
-
-#ifndef __DLMCONSTANTS_DOT_H__
-#define __DLMCONSTANTS_DOT_H__
-
-/*
- * Constants used by DLM interface.
- */
-
-#define DLM_LOCKSPACE_LEN       64
-#define DLM_RESNAME_MAXLEN      64
-
-
-/*
- * Lock Modes
- */
-
-#define DLM_LOCK_IV		(-1)	/* invalid */
-#define DLM_LOCK_NL		0	/* null */
-#define DLM_LOCK_CR		1	/* concurrent read */
-#define DLM_LOCK_CW		2	/* concurrent write */
-#define DLM_LOCK_PR		3	/* protected read */
-#define DLM_LOCK_PW		4	/* protected write */
-#define DLM_LOCK_EX		5	/* exclusive */
-
-
-/*
- * Flags to dlm_lock
- *
- * DLM_LKF_NOQUEUE
- *
- * Do not queue the lock request on the wait queue if it cannot be granted
- * immediately.  If the lock cannot be granted because of this flag, DLM will
- * either return -EAGAIN from the dlm_lock call or will return 0 from
- * dlm_lock and -EAGAIN in the lock status block when the AST is executed.
- *
- * DLM_LKF_CANCEL
- *
- * Used to cancel a pending lock request or conversion.  A converting lock is
- * returned to its previously granted mode.
- *
- * DLM_LKF_CONVERT
- *
- * Indicates a lock conversion request.  For conversions the name and namelen
- * are ignored and the lock ID in the LKSB is used to identify the lock.
- *
- * DLM_LKF_VALBLK
- *
- * Requests DLM to return the current contents of the lock value block in the
- * lock status block.  When this flag is set in a lock conversion from PW or EX
- * modes, DLM assigns the value specified in the lock status block to the lock
- * value block of the lock resource.  The LVB is a DLM_LVB_LEN size array
- * containing application-specific information.
- *
- * DLM_LKF_QUECVT
- *
- * Force a conversion request to be queued, even if it is compatible with
- * the granted modes of other locks on the same resource.
- *
- * DLM_LKF_IVVALBLK
- *
- * Invalidate the lock value block.
- *
- * DLM_LKF_CONVDEADLK
- *
- * Allows the dlm to resolve conversion deadlocks internally by demoting the
- * granted mode of a converting lock to NL.  The DLM_SBF_DEMOTED flag is
- * returned for a conversion that's been effected by this.
- *
- * DLM_LKF_PERSISTENT
- *
- * Only relevant to locks originating in userspace.  A persistent lock will not
- * be removed if the process holding the lock exits.
- *
- * DLM_LKF_NODLCKWT
- *
- * Do not cancel the lock if it gets into conversion deadlock.
- * Exclude this lock from being monitored due to DLM_LSFL_TIMEWARN.
- *
- * DLM_LKF_NODLCKBLK
- *
- * net yet implemented
- *
- * DLM_LKF_EXPEDITE
- *
- * Used only with new requests for NL mode locks.  Tells the lock manager
- * to grant the lock, ignoring other locks in convert and wait queues.
- *
- * DLM_LKF_NOQUEUEBAST
- *
- * Send blocking AST's before returning -EAGAIN to the caller.  It is only
- * used along with the NOQUEUE flag.  Blocking AST's are not sent for failed
- * NOQUEUE requests otherwise.
- *
- * DLM_LKF_HEADQUE
- *
- * Add a lock to the head of the convert or wait queue rather than the tail.
- *
- * DLM_LKF_NOORDER
- *
- * Disregard the standard grant order rules and grant a lock as soon as it
- * is compatible with other granted locks.
- *
- * DLM_LKF_ORPHAN
- *
- * not yet implemented
- *
- * DLM_LKF_ALTPR
- *
- * If the requested mode cannot be granted immediately, try to grant the lock
- * in PR mode instead.  If this alternate mode is granted instead of the
- * requested mode, DLM_SBF_ALTMODE is returned in the lksb.
- *
- * DLM_LKF_ALTCW
- *
- * The same as ALTPR, but the alternate mode is CW.
- *
- * DLM_LKF_FORCEUNLOCK
- *
- * Unlock the lock even if it is converting or waiting or has sublocks.
- * Only really for use by the userland device.c code.
- *
- */
-
-#define DLM_LKF_NOQUEUE		0x00000001
-#define DLM_LKF_CANCEL		0x00000002
-#define DLM_LKF_CONVERT		0x00000004
-#define DLM_LKF_VALBLK		0x00000008
-#define DLM_LKF_QUECVT		0x00000010
-#define DLM_LKF_IVVALBLK	0x00000020
-#define DLM_LKF_CONVDEADLK	0x00000040
-#define DLM_LKF_PERSISTENT	0x00000080
-#define DLM_LKF_NODLCKWT	0x00000100
-#define DLM_LKF_NODLCKBLK	0x00000200
-#define DLM_LKF_EXPEDITE	0x00000400
-#define DLM_LKF_NOQUEUEBAST	0x00000800
-#define DLM_LKF_HEADQUE		0x00001000
-#define DLM_LKF_NOORDER		0x00002000
-#define DLM_LKF_ORPHAN		0x00004000
-#define DLM_LKF_ALTPR		0x00008000
-#define DLM_LKF_ALTCW		0x00010000
-#define DLM_LKF_FORCEUNLOCK	0x00020000
-#define DLM_LKF_TIMEOUT		0x00040000
-
-/*
- * Some return codes that are not in errno.h
- */
-
-#define DLM_ECANCEL		0x10001
-#define DLM_EUNLOCK		0x10002
-
-#endif  /* __DLMCONSTANTS_DOT_H__ */
diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h
deleted file mode 100644
index 91e3a360f611..000000000000
--- a/include/linux/dm-ioctl.h
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * Copyright (C) 2001 - 2003 Sistina Software (UK) Limited.
- * Copyright (C) 2004 - 2009 Red Hat, Inc. All rights reserved.
- *
- * This file is released under the LGPL.
- */
-
-#ifndef _LINUX_DM_IOCTL_V4_H
-#define _LINUX_DM_IOCTL_V4_H
-
-#include <linux/types.h>
-
-#define DM_DIR "mapper"		/* Slashes not supported */
-#define DM_CONTROL_NODE "control"
-#define DM_MAX_TYPE_NAME 16
-#define DM_NAME_LEN 128
-#define DM_UUID_LEN 129
-
-/*
- * A traditional ioctl interface for the device mapper.
- *
- * Each device can have two tables associated with it, an
- * 'active' table which is the one currently used by io passing
- * through the device, and an 'inactive' one which is a table
- * that is being prepared as a replacement for the 'active' one.
- *
- * DM_VERSION:
- * Just get the version information for the ioctl interface.
- *
- * DM_REMOVE_ALL:
- * Remove all dm devices, destroy all tables.  Only really used
- * for debug.
- *
- * DM_LIST_DEVICES:
- * Get a list of all the dm device names.
- *
- * DM_DEV_CREATE:
- * Create a new device, neither the 'active' or 'inactive' table
- * slots will be filled.  The device will be in suspended state
- * after creation, however any io to the device will get errored
- * since it will be out-of-bounds.
- *
- * DM_DEV_REMOVE:
- * Remove a device, destroy any tables.
- *
- * DM_DEV_RENAME:
- * Rename a device or set its uuid if none was previously supplied.
- *
- * DM_SUSPEND:
- * This performs both suspend and resume, depending which flag is
- * passed in.
- * Suspend: This command will not return until all pending io to
- * the device has completed.  Further io will be deferred until
- * the device is resumed.
- * Resume: It is no longer an error to issue this command on an
- * unsuspended device.  If a table is present in the 'inactive'
- * slot, it will be moved to the active slot, then the old table
- * from the active slot will be _destroyed_.  Finally the device
- * is resumed.
- *
- * DM_DEV_STATUS:
- * Retrieves the status for the table in the 'active' slot.
- *
- * DM_DEV_WAIT:
- * Wait for a significant event to occur to the device.  This
- * could either be caused by an event triggered by one of the
- * targets of the table in the 'active' slot, or a table change.
- *
- * DM_TABLE_LOAD:
- * Load a table into the 'inactive' slot for the device.  The
- * device does _not_ need to be suspended prior to this command.
- *
- * DM_TABLE_CLEAR:
- * Destroy any table in the 'inactive' slot (ie. abort).
- *
- * DM_TABLE_DEPS:
- * Return a set of device dependencies for the 'active' table.
- *
- * DM_TABLE_STATUS:
- * Return the targets status for the 'active' table.
- *
- * DM_TARGET_MSG:
- * Pass a message string to the target at a specific offset of a device.
- *
- * DM_DEV_SET_GEOMETRY:
- * Set the geometry of a device by passing in a string in this format:
- *
- * "cylinders heads sectors_per_track start_sector"
- *
- * Beware that CHS geometry is nearly obsolete and only provided
- * for compatibility with dm devices that can be booted by a PC
- * BIOS.  See struct hd_geometry for range limits.  Also note that
- * the geometry is erased if the device size changes.
- */
-
-/*
- * All ioctl arguments consist of a single chunk of memory, with
- * this structure at the start.  If a uuid is specified any
- * lookup (eg. for a DM_INFO) will be done on that, *not* the
- * name.
- */
-struct dm_ioctl {
-	/*
-	 * The version number is made up of three parts:
-	 * major - no backward or forward compatibility,
-	 * minor - only backwards compatible,
-	 * patch - both backwards and forwards compatible.
-	 *
-	 * All clients of the ioctl interface should fill in the
-	 * version number of the interface that they were
-	 * compiled with.
-	 *
-	 * All recognised ioctl commands (ie. those that don't
-	 * return -ENOTTY) fill out this field, even if the
-	 * command failed.
-	 */
-	__u32 version[3];	/* in/out */
-	__u32 data_size;	/* total size of data passed in
-				 * including this struct */
-
-	__u32 data_start;	/* offset to start of data
-				 * relative to start of this struct */
-
-	__u32 target_count;	/* in/out */
-	__s32 open_count;	/* out */
-	__u32 flags;		/* in/out */
-
-	/*
-	 * event_nr holds either the event number (input and output) or the
-	 * udev cookie value (input only).
-	 * The DM_DEV_WAIT ioctl takes an event number as input.
-	 * The DM_SUSPEND, DM_DEV_REMOVE and DM_DEV_RENAME ioctls
-	 * use the field as a cookie to return in the DM_COOKIE
-	 * variable with the uevents they issue.
-	 * For output, the ioctls return the event number, not the cookie.
-	 */
-	__u32 event_nr;      	/* in/out */
-	__u32 padding;
-
-	__u64 dev;		/* in/out */
-
-	char name[DM_NAME_LEN];	/* device name */
-	char uuid[DM_UUID_LEN];	/* unique identifier for
-				 * the block device */
-	char data[7];		/* padding or data */
-};
-
-/*
- * Used to specify tables.  These structures appear after the
- * dm_ioctl.
- */
-struct dm_target_spec {
-	__u64 sector_start;
-	__u64 length;
-	__s32 status;		/* used when reading from kernel only */
-
-	/*
-	 * Location of the next dm_target_spec.
-	 * - When specifying targets on a DM_TABLE_LOAD command, this value is
-	 *   the number of bytes from the start of the "current" dm_target_spec
-	 *   to the start of the "next" dm_target_spec.
-	 * - When retrieving targets on a DM_TABLE_STATUS command, this value
-	 *   is the number of bytes from the start of the first dm_target_spec
-	 *   (that follows the dm_ioctl struct) to the start of the "next"
-	 *   dm_target_spec.
-	 */
-	__u32 next;
-
-	char target_type[DM_MAX_TYPE_NAME];
-
-	/*
-	 * Parameter string starts immediately after this object.
-	 * Be careful to add padding after string to ensure correct
-	 * alignment of subsequent dm_target_spec.
-	 */
-};
-
-/*
- * Used to retrieve the target dependencies.
- */
-struct dm_target_deps {
-	__u32 count;	/* Array size */
-	__u32 padding;	/* unused */
-	__u64 dev[0];	/* out */
-};
-
-/*
- * Used to get a list of all dm devices.
- */
-struct dm_name_list {
-	__u64 dev;
-	__u32 next;		/* offset to the next record from
-				   the _start_ of this */
-	char name[0];
-};
-
-/*
- * Used to retrieve the target versions
- */
-struct dm_target_versions {
-        __u32 next;
-        __u32 version[3];
-
-        char name[0];
-};
-
-/*
- * Used to pass message to a target
- */
-struct dm_target_msg {
-	__u64 sector;	/* Device sector */
-
-	char message[0];
-};
-
-/*
- * If you change this make sure you make the corresponding change
- * to dm-ioctl.c:lookup_ioctl()
- */
-enum {
-	/* Top level cmds */
-	DM_VERSION_CMD = 0,
-	DM_REMOVE_ALL_CMD,
-	DM_LIST_DEVICES_CMD,
-
-	/* device level cmds */
-	DM_DEV_CREATE_CMD,
-	DM_DEV_REMOVE_CMD,
-	DM_DEV_RENAME_CMD,
-	DM_DEV_SUSPEND_CMD,
-	DM_DEV_STATUS_CMD,
-	DM_DEV_WAIT_CMD,
-
-	/* Table level cmds */
-	DM_TABLE_LOAD_CMD,
-	DM_TABLE_CLEAR_CMD,
-	DM_TABLE_DEPS_CMD,
-	DM_TABLE_STATUS_CMD,
-
-	/* Added later */
-	DM_LIST_VERSIONS_CMD,
-	DM_TARGET_MSG_CMD,
-	DM_DEV_SET_GEOMETRY_CMD
-};
-
-#define DM_IOCTL 0xfd
-
-#define DM_VERSION       _IOWR(DM_IOCTL, DM_VERSION_CMD, struct dm_ioctl)
-#define DM_REMOVE_ALL    _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, struct dm_ioctl)
-#define DM_LIST_DEVICES  _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, struct dm_ioctl)
-
-#define DM_DEV_CREATE    _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, struct dm_ioctl)
-#define DM_DEV_REMOVE    _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, struct dm_ioctl)
-#define DM_DEV_RENAME    _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, struct dm_ioctl)
-#define DM_DEV_SUSPEND   _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, struct dm_ioctl)
-#define DM_DEV_STATUS    _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, struct dm_ioctl)
-#define DM_DEV_WAIT      _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, struct dm_ioctl)
-
-#define DM_TABLE_LOAD    _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, struct dm_ioctl)
-#define DM_TABLE_CLEAR   _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, struct dm_ioctl)
-#define DM_TABLE_DEPS    _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
-#define DM_TABLE_STATUS  _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, struct dm_ioctl)
-
-#define DM_LIST_VERSIONS _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, struct dm_ioctl)
-
-#define DM_TARGET_MSG	 _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl)
-#define DM_DEV_SET_GEOMETRY	_IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
-
-#define DM_VERSION_MAJOR	4
-#define DM_VERSION_MINOR	23
-#define DM_VERSION_PATCHLEVEL	0
-#define DM_VERSION_EXTRA	"-ioctl (2012-07-25)"
-
-/* Status bits */
-#define DM_READONLY_FLAG	(1 << 0) /* In/Out */
-#define DM_SUSPEND_FLAG		(1 << 1) /* In/Out */
-#define DM_PERSISTENT_DEV_FLAG	(1 << 3) /* In */
-
-/*
- * Flag passed into ioctl STATUS command to get table information
- * rather than current status.
- */
-#define DM_STATUS_TABLE_FLAG	(1 << 4) /* In */
-
-/*
- * Flags that indicate whether a table is present in either of
- * the two table slots that a device has.
- */
-#define DM_ACTIVE_PRESENT_FLAG   (1 << 5) /* Out */
-#define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */
-
-/*
- * Indicates that the buffer passed in wasn't big enough for the
- * results.
- */
-#define DM_BUFFER_FULL_FLAG	(1 << 8) /* Out */
-
-/*
- * This flag is now ignored.
- */
-#define DM_SKIP_BDGET_FLAG	(1 << 9) /* In */
-
-/*
- * Set this to avoid attempting to freeze any filesystem when suspending.
- */
-#define DM_SKIP_LOCKFS_FLAG	(1 << 10) /* In */
-
-/*
- * Set this to suspend without flushing queued ios.
- * Also disables flushing uncommitted changes in the thin target before
- * generating statistics for DM_TABLE_STATUS and DM_DEV_WAIT.
- */
-#define DM_NOFLUSH_FLAG		(1 << 11) /* In */
-
-/*
- * If set, any table information returned will relate to the inactive
- * table instead of the live one.  Always check DM_INACTIVE_PRESENT_FLAG
- * is set before using the data returned.
- */
-#define DM_QUERY_INACTIVE_TABLE_FLAG	(1 << 12) /* In */
-
-/*
- * If set, a uevent was generated for which the caller may need to wait.
- */
-#define DM_UEVENT_GENERATED_FLAG	(1 << 13) /* Out */
-
-/*
- * If set, rename changes the uuid not the name.  Only permitted
- * if no uuid was previously supplied: an existing uuid cannot be changed.
- */
-#define DM_UUID_FLAG			(1 << 14) /* In */
-
-/*
- * If set, all buffers are wiped after use. Use when sending
- * or requesting sensitive data such as an encryption key.
- */
-#define DM_SECURE_DATA_FLAG		(1 << 15) /* In */
-
-#endif				/* _LINUX_DM_IOCTL_H */
diff --git a/include/linux/dm-log-userspace.h b/include/linux/dm-log-userspace.h
deleted file mode 100644
index 0678c2adc421..000000000000
--- a/include/linux/dm-log-userspace.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * Copyright (C) 2006-2009 Red Hat, Inc.
- *
- * This file is released under the LGPL.
- */
-
-#ifndef __DM_LOG_USERSPACE_H__
-#define __DM_LOG_USERSPACE_H__
-
-#include <linux/dm-ioctl.h> /* For DM_UUID_LEN */
-
-/*
- * The device-mapper userspace log module consists of a kernel component and
- * a user-space component.  The kernel component implements the API defined
- * in dm-dirty-log.h.  Its purpose is simply to pass the parameters and
- * return values of those API functions between kernel and user-space.
- *
- * Below are defined the 'request_types' - DM_ULOG_CTR, DM_ULOG_DTR, etc.
- * These request types represent the different functions in the device-mapper
- * dirty log API.  Each of these is described in more detail below.
- *
- * The user-space program must listen for requests from the kernel (representing
- * the various API functions) and process them.
- *
- * User-space begins by setting up the communication link (error checking
- * removed for clarity):
- *	fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
- *	addr.nl_family = AF_NETLINK;
- *	addr.nl_groups = CN_IDX_DM;
- *	addr.nl_pid = 0;
- *	r = bind(fd, (struct sockaddr *) &addr, sizeof(addr));
- *	opt = addr.nl_groups;
- *	setsockopt(fd, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &opt, sizeof(opt));
- *
- * User-space will then wait to receive requests form the kernel, which it
- * will process as described below.  The requests are received in the form,
- * ((struct dm_ulog_request) + (additional data)).  Depending on the request
- * type, there may or may not be 'additional data'.  In the descriptions below,
- * you will see 'Payload-to-userspace' and 'Payload-to-kernel'.  The
- * 'Payload-to-userspace' is what the kernel sends in 'additional data' as
- * necessary parameters to complete the request.  The 'Payload-to-kernel' is
- * the 'additional data' returned to the kernel that contains the necessary
- * results of the request.  The 'data_size' field in the dm_ulog_request
- * structure denotes the availability and amount of payload data.
- */
-
-/*
- * DM_ULOG_CTR corresponds to (found in dm-dirty-log.h):
- * int (*ctr)(struct dm_dirty_log *log, struct dm_target *ti,
- *	      unsigned argc, char **argv);
- *
- * Payload-to-userspace:
- *	A single string containing all the argv arguments separated by ' 's
- * Payload-to-kernel:
- *	A NUL-terminated string that is the name of the device that is used
- *	as the backing store for the log data.  'dm_get_device' will be called
- *	on this device.  ('dm_put_device' will be called on this device
- *	automatically after calling DM_ULOG_DTR.)  If there is no device needed
- *	for log data, 'data_size' in the dm_ulog_request struct should be 0.
- *
- * The UUID contained in the dm_ulog_request structure is the reference that
- * will be used by all request types to a specific log.  The constructor must
- * record this association with the instance created.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field, filling the
- * data field with the log device if necessary, and setting 'data_size'
- * appropriately.
- */
-#define DM_ULOG_CTR                    1
-
-/*
- * DM_ULOG_DTR corresponds to (found in dm-dirty-log.h):
- * void (*dtr)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	A single string containing all the argv arguments separated by ' 's
- * Payload-to-kernel:
- *	None.  ('data_size' in the dm_ulog_request struct should be 0.)
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being destroyed.  There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_DTR                    2
-
-/*
- * DM_ULOG_PRESUSPEND corresponds to (found in dm-dirty-log.h):
- * int (*presuspend)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	None.
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being presuspended.  There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_PRESUSPEND             3
-
-/*
- * DM_ULOG_POSTSUSPEND corresponds to (found in dm-dirty-log.h):
- * int (*postsuspend)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	None.
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being postsuspended.  There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_POSTSUSPEND            4
-
-/*
- * DM_ULOG_RESUME corresponds to (found in dm-dirty-log.h):
- * int (*resume)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	None.
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being resumed.  There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_RESUME                 5
-
-/*
- * DM_ULOG_GET_REGION_SIZE corresponds to (found in dm-dirty-log.h):
- * uint32_t (*get_region_size)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	uint64_t - contains the region size
- *
- * The region size is something that was determined at constructor time.
- * It is returned in the payload area and 'data_size' is set to
- * reflect this.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field appropriately.
- */
-#define DM_ULOG_GET_REGION_SIZE        6
-
-/*
- * DM_ULOG_IS_CLEAN corresponds to (found in dm-dirty-log.h):
- * int (*is_clean)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- *	uint64_t - the region to get clean status on
- * Payload-to-kernel:
- *	int64_t  - 1 if clean, 0 otherwise
- *
- * Payload is sizeof(uint64_t) and contains the region for which the clean
- * status is being made.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - filling the payload with 0 (not clean) or
- * 1 (clean), setting 'data_size' and 'error' appropriately.
- */
-#define DM_ULOG_IS_CLEAN               7
-
-/*
- * DM_ULOG_IN_SYNC corresponds to (found in dm-dirty-log.h):
- * int (*in_sync)(struct dm_dirty_log *log, region_t region,
- *		  int can_block);
- *
- * Payload-to-userspace:
- *	uint64_t - the region to get sync status on
- * Payload-to-kernel:
- *	int64_t - 1 if in-sync, 0 otherwise
- *
- * Exactly the same as 'is_clean' above, except this time asking "has the
- * region been recovered?" vs. "is the region not being modified?"
- */
-#define DM_ULOG_IN_SYNC                8
-
-/*
- * DM_ULOG_FLUSH corresponds to (found in dm-dirty-log.h):
- * int (*flush)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	None.
- *
- * No incoming or outgoing payload.  Simply flush log state to disk.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_FLUSH                  9
-
-/*
- * DM_ULOG_MARK_REGION corresponds to (found in dm-dirty-log.h):
- * void (*mark_region)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- *	uint64_t [] - region(s) to mark
- * Payload-to-kernel:
- *	None.
- *
- * Incoming payload contains the one or more regions to mark dirty.
- * The number of regions contained in the payload can be determined from
- * 'data_size/sizeof(uint64_t)'.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_MARK_REGION           10
-
-/*
- * DM_ULOG_CLEAR_REGION corresponds to (found in dm-dirty-log.h):
- * void (*clear_region)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- *	uint64_t [] - region(s) to clear
- * Payload-to-kernel:
- *	None.
- *
- * Incoming payload contains the one or more regions to mark clean.
- * The number of regions contained in the payload can be determined from
- * 'data_size/sizeof(uint64_t)'.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_CLEAR_REGION          11
-
-/*
- * DM_ULOG_GET_RESYNC_WORK corresponds to (found in dm-dirty-log.h):
- * int (*get_resync_work)(struct dm_dirty_log *log, region_t *region);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	{
- *		int64_t i; -- 1 if recovery necessary, 0 otherwise
- *		uint64_t r; -- The region to recover if i=1
- *	}
- * 'data_size' should be set appropriately.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field appropriately.
- */
-#define DM_ULOG_GET_RESYNC_WORK       12
-
-/*
- * DM_ULOG_SET_REGION_SYNC corresponds to (found in dm-dirty-log.h):
- * void (*set_region_sync)(struct dm_dirty_log *log,
- *			   region_t region, int in_sync);
- *
- * Payload-to-userspace:
- *	{
- *		uint64_t - region to set sync state on
- *		int64_t  - 0 if not-in-sync, 1 if in-sync
- *	}
- * Payload-to-kernel:
- *	None.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_SET_REGION_SYNC       13
-
-/*
- * DM_ULOG_GET_SYNC_COUNT corresponds to (found in dm-dirty-log.h):
- * region_t (*get_sync_count)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	uint64_t - the number of in-sync regions
- *
- * No incoming payload.  Kernel-bound payload contains the number of
- * regions that are in-sync (in a size_t).
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_GET_SYNC_COUNT        14
-
-/*
- * DM_ULOG_STATUS_INFO corresponds to (found in dm-dirty-log.h):
- * int (*status)(struct dm_dirty_log *log, STATUSTYPE_INFO,
- *		 char *result, unsigned maxlen);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	Character string containing STATUSTYPE_INFO
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_STATUS_INFO           15
-
-/*
- * DM_ULOG_STATUS_TABLE corresponds to (found in dm-dirty-log.h):
- * int (*status)(struct dm_dirty_log *log, STATUSTYPE_TABLE,
- *		 char *result, unsigned maxlen);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	Character string containing STATUSTYPE_TABLE
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_STATUS_TABLE          16
-
-/*
- * DM_ULOG_IS_REMOTE_RECOVERING corresponds to (found in dm-dirty-log.h):
- * int (*is_remote_recovering)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- *	uint64_t - region to determine recovery status on
- * Payload-to-kernel:
- *	{
- *		int64_t is_recovering;  -- 0 if no, 1 if yes
- *		uint64_t in_sync_hint;  -- lowest region still needing resync
- *	}
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_IS_REMOTE_RECOVERING  17
-
-/*
- * (DM_ULOG_REQUEST_MASK & request_type) to get the request type
- *
- * Payload-to-userspace:
- *	A single string containing all the argv arguments separated by ' 's
- * Payload-to-kernel:
- *	None.  ('data_size' in the dm_ulog_request struct should be 0.)
- *
- * We are reserving 8 bits of the 32-bit 'request_type' field for the
- * various request types above.  The remaining 24-bits are currently
- * set to zero and are reserved for future use and compatibility concerns.
- *
- * User-space should always use DM_ULOG_REQUEST_TYPE to acquire the
- * request type from the 'request_type' field to maintain forward compatibility.
- */
-#define DM_ULOG_REQUEST_MASK 0xFF
-#define DM_ULOG_REQUEST_TYPE(request_type) \
-	(DM_ULOG_REQUEST_MASK & (request_type))
-
-/*
- * DM_ULOG_REQUEST_VERSION is incremented when there is a
- * change to the way information is passed between kernel
- * and userspace.  This could be a structure change of
- * dm_ulog_request or a change in the way requests are
- * issued/handled.  Changes are outlined here:
- *	version 1:  Initial implementation
- *	version 2:  DM_ULOG_CTR allowed to return a string containing a
- *	            device name that is to be registered with DM via
- *	            'dm_get_device'.
- */
-#define DM_ULOG_REQUEST_VERSION 2
-
-struct dm_ulog_request {
-	/*
-	 * The local unique identifier (luid) and the universally unique
-	 * identifier (uuid) are used to tie a request to a specific
-	 * mirror log.  A single machine log could probably make due with
-	 * just the 'luid', but a cluster-aware log must use the 'uuid' and
-	 * the 'luid'.  The uuid is what is required for node to node
-	 * communication concerning a particular log, but the 'luid' helps
-	 * differentiate between logs that are being swapped and have the
-	 * same 'uuid'.  (Think "live" and "inactive" device-mapper tables.)
-	 */
-	uint64_t luid;
-	char uuid[DM_UUID_LEN];
-	char padding[3];        /* Padding because DM_UUID_LEN = 129 */
-
-	uint32_t version;       /* See DM_ULOG_REQUEST_VERSION */
-	int32_t error;          /* Used to report back processing errors */
-
-	uint32_t seq;           /* Sequence number for request */
-	uint32_t request_type;  /* DM_ULOG_* defined above */
-	uint32_t data_size;     /* How much data (not including this struct) */
-
-	char data[0];
-};
-
-#endif /* __DM_LOG_USERSPACE_H__ */
diff --git a/include/linux/dn.h b/include/linux/dn.h
deleted file mode 100644
index 9c50445462d9..000000000000
--- a/include/linux/dn.h
+++ /dev/null
@@ -1,146 +0,0 @@
-#ifndef _LINUX_DN_H
-#define _LINUX_DN_H
-
-#include <linux/types.h>
-
-/*
-
-	DECnet Data Structures and Constants
-
-*/
-
-/* 
- * DNPROTO_NSP can't be the same as SOL_SOCKET, 
- * so increment each by one (compared to ULTRIX)
- */
-#define DNPROTO_NSP     2                       /* NSP protocol number       */
-#define DNPROTO_ROU     3                       /* Routing protocol number   */
-#define DNPROTO_NML     4                       /* Net mgt protocol number   */
-#define DNPROTO_EVL     5                       /* Evl protocol number (usr) */
-#define DNPROTO_EVR     6                       /* Evl protocol number (evl) */
-#define DNPROTO_NSPT    7                       /* NSP trace protocol number */
-
-
-#define DN_ADDL		2
-#define DN_MAXADDL	2 /* ULTRIX headers have 20 here, but pathworks has 2 */
-#define DN_MAXOPTL	16
-#define DN_MAXOBJL	16
-#define DN_MAXACCL	40
-#define DN_MAXALIASL	128
-#define DN_MAXNODEL	256
-#define DNBUFSIZE	65023
-
-/* 
- * SET/GET Socket options  - must match the DSO_ numbers below
- */
-#define SO_CONDATA      1
-#define SO_CONACCESS    2
-#define SO_PROXYUSR     3
-#define SO_LINKINFO     7
-
-#define DSO_CONDATA     1        /* Set/Get connect data                */
-#define DSO_DISDATA     10       /* Set/Get disconnect data             */
-#define DSO_CONACCESS   2        /* Set/Get connect access data         */
-#define DSO_ACCEPTMODE  4        /* Set/Get accept mode                 */
-#define DSO_CONACCEPT   5        /* Accept deferred connection          */
-#define DSO_CONREJECT   6        /* Reject deferred connection          */
-#define DSO_LINKINFO    7        /* Set/Get link information            */
-#define DSO_STREAM      8        /* Set socket type to stream           */
-#define DSO_SEQPACKET   9        /* Set socket type to sequenced packet */
-#define DSO_MAXWINDOW   11       /* Maximum window size allowed         */
-#define DSO_NODELAY	12       /* Turn off nagle                      */
-#define DSO_CORK        13       /* Wait for more data!                 */
-#define DSO_SERVICES	14       /* NSP Services field                  */
-#define DSO_INFO	15       /* NSP Info field                      */
-#define DSO_MAX         15       /* Maximum option number               */
-
-
-/* LINK States */
-#define LL_INACTIVE	0
-#define LL_CONNECTING	1
-#define LL_RUNNING	2
-#define LL_DISCONNECTING 3
-
-#define ACC_IMMED 0
-#define ACC_DEFER 1
-
-#define SDF_WILD        1                  /* Wild card object          */
-#define SDF_PROXY       2                  /* Addr eligible for proxy   */
-#define SDF_UICPROXY    4                  /* Use uic-based proxy       */
-
-/* Structures */
-
-
-struct dn_naddr {
-	__le16		a_len;
-	__u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */
-};
-
-struct sockaddr_dn {
-	__u16		sdn_family;
-	__u8		sdn_flags;
-	__u8		sdn_objnum;
-	__le16		sdn_objnamel;
-	__u8		sdn_objname[DN_MAXOBJL];
-	struct   dn_naddr	sdn_add;
-};
-#define sdn_nodeaddrl   sdn_add.a_len   /* Node address length  */
-#define sdn_nodeaddr    sdn_add.a_addr  /* Node address         */
-
-
-
-/*
- * DECnet set/get DSO_CONDATA, DSO_DISDATA (optional data) structure
- */
-struct optdata_dn {
-        __le16  opt_status;     /* Extended status return */
-#define opt_sts opt_status
-        __le16  opt_optl;       /* Length of user data    */
-        __u8   opt_data[16];   /* User data              */
-};
-
-struct accessdata_dn {
-	__u8		acc_accl;
-	__u8		acc_acc[DN_MAXACCL];
-	__u8 		acc_passl;
-	__u8		acc_pass[DN_MAXACCL];
-	__u8 		acc_userl;
-	__u8		acc_user[DN_MAXACCL];
-};
-
-/*
- * DECnet logical link information structure
- */
-struct linkinfo_dn {
-        __u16  idn_segsize;    /* Segment size for link */
-        __u8   idn_linkstate;  /* Logical link state    */
-};
-
-/*
- * Ethernet address format (for DECnet)
- */
-union etheraddress {
-        __u8 dne_addr[6];             /* Full ethernet address */
-  struct {
-                __u8 dne_hiord[4];    /* DECnet HIORD prefix   */
-                __u8 dne_nodeaddr[2]; /* DECnet node address   */
-  } dne_remote;
-};
-
-
-/*
- * DECnet physical socket address format
- */
-struct dn_addr {
-        __le16 dna_family;      /* AF_DECnet               */
-        union etheraddress dna_netaddr; /* DECnet ethernet address */
-};
-
-#define DECNET_IOCTL_BASE 0x89 /* PROTOPRIVATE range */
-
-#define SIOCSNETADDR  _IOW(DECNET_IOCTL_BASE, 0xe0, struct dn_naddr)
-#define SIOCGNETADDR  _IOR(DECNET_IOCTL_BASE, 0xe1, struct dn_naddr)
-#define OSIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, int)
-#define OSIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, int)
-
-#endif /* _LINUX_DN_H */
diff --git a/include/linux/dqblk_xfs.h b/include/linux/dqblk_xfs.h
deleted file mode 100644
index 86552807aed9..000000000000
--- a/include/linux/dqblk_xfs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (c) 1995-2001,2004 Silicon Graphics, Inc.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesset General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifndef _LINUX_DQBLK_XFS_H
-#define _LINUX_DQBLK_XFS_H
-
-#include <linux/types.h>
-
-/*
- * Disk quota - quotactl(2) commands for the XFS Quota Manager (XQM).
- */
-
-#define XQM_CMD(x)	(('X'<<8)+(x))	/* note: forms first QCMD argument */
-#define XQM_COMMAND(x)	(((x) & (0xff<<8)) == ('X'<<8))	/* test if for XFS */
-
-#define XQM_USRQUOTA	0	/* system call user quota type */
-#define XQM_GRPQUOTA	1	/* system call group quota type */
-#define XQM_PRJQUOTA	2	/* system call project quota type */
-#define XQM_MAXQUOTAS	3
-
-#define Q_XQUOTAON	XQM_CMD(1)	/* enable accounting/enforcement */
-#define Q_XQUOTAOFF	XQM_CMD(2)	/* disable accounting/enforcement */
-#define Q_XGETQUOTA	XQM_CMD(3)	/* get disk limits and usage */
-#define Q_XSETQLIM	XQM_CMD(4)	/* set disk limits */
-#define Q_XGETQSTAT	XQM_CMD(5)	/* get quota subsystem status */
-#define Q_XQUOTARM	XQM_CMD(6)	/* free disk space used by dquots */
-#define Q_XQUOTASYNC	XQM_CMD(7)	/* delalloc flush, updates dquots */
-
-/*
- * fs_disk_quota structure:
- *
- * This contains the current quota information regarding a user/proj/group.
- * It is 64-bit aligned, and all the blk units are in BBs (Basic Blocks) of
- * 512 bytes.
- */
-#define FS_DQUOT_VERSION	1	/* fs_disk_quota.d_version */
-typedef struct fs_disk_quota {
-	__s8		d_version;	/* version of this structure */
-	__s8		d_flags;	/* FS_{USER,PROJ,GROUP}_QUOTA */
-	__u16		d_fieldmask;	/* field specifier */
-	__u32		d_id;		/* user, project, or group ID */
-	__u64		d_blk_hardlimit;/* absolute limit on disk blks */
-	__u64		d_blk_softlimit;/* preferred limit on disk blks */
-	__u64		d_ino_hardlimit;/* maximum # allocated inodes */
-	__u64		d_ino_softlimit;/* preferred inode limit */
-	__u64		d_bcount;	/* # disk blocks owned by the user */
-	__u64		d_icount;	/* # inodes owned by the user */
-	__s32		d_itimer;	/* zero if within inode limits */
-					/* if not, we refuse service */
-	__s32		d_btimer;	/* similar to above; for disk blocks */
-	__u16	  	d_iwarns;       /* # warnings issued wrt num inodes */
-	__u16	  	d_bwarns;       /* # warnings issued wrt disk blocks */
-	__s32		d_padding2;	/* padding2 - for future use */
-	__u64		d_rtb_hardlimit;/* absolute limit on realtime blks */
-	__u64		d_rtb_softlimit;/* preferred limit on RT disk blks */
-	__u64		d_rtbcount;	/* # realtime blocks owned */
-	__s32		d_rtbtimer;	/* similar to above; for RT disk blks */
-	__u16	  	d_rtbwarns;     /* # warnings issued wrt RT disk blks */
-	__s16		d_padding3;	/* padding3 - for future use */	
-	char		d_padding4[8];	/* yet more padding */
-} fs_disk_quota_t;
-
-/*
- * These fields are sent to Q_XSETQLIM to specify fields that need to change.
- */
-#define FS_DQ_ISOFT	(1<<0)
-#define FS_DQ_IHARD	(1<<1)
-#define FS_DQ_BSOFT	(1<<2)
-#define FS_DQ_BHARD 	(1<<3)
-#define FS_DQ_RTBSOFT	(1<<4)
-#define FS_DQ_RTBHARD	(1<<5)
-#define FS_DQ_LIMIT_MASK	(FS_DQ_ISOFT | FS_DQ_IHARD | FS_DQ_BSOFT | \
-				 FS_DQ_BHARD | FS_DQ_RTBSOFT | FS_DQ_RTBHARD)
-/*
- * These timers can only be set in super user's dquot. For others, timers are
- * automatically started and stopped. Superusers timer values set the limits
- * for the rest.  In case these values are zero, the DQ_{F,B}TIMELIMIT values
- * defined below are used. 
- * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
- */
-#define FS_DQ_BTIMER	(1<<6)
-#define FS_DQ_ITIMER	(1<<7)
-#define FS_DQ_RTBTIMER 	(1<<8)
-#define FS_DQ_TIMER_MASK	(FS_DQ_BTIMER | FS_DQ_ITIMER | FS_DQ_RTBTIMER)
-
-/*
- * Warning counts are set in both super user's dquot and others. For others,
- * warnings are set/cleared by the administrators (or automatically by going
- * below the soft limit).  Superusers warning values set the warning limits
- * for the rest.  In case these values are zero, the DQ_{F,B}WARNLIMIT values
- * defined below are used. 
- * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
- */
-#define FS_DQ_BWARNS	(1<<9)
-#define FS_DQ_IWARNS	(1<<10)
-#define FS_DQ_RTBWARNS	(1<<11)
-#define FS_DQ_WARNS_MASK	(FS_DQ_BWARNS | FS_DQ_IWARNS | FS_DQ_RTBWARNS)
-
-/*
- * Accounting values.  These can only be set for filesystem with
- * non-transactional quotas that require quotacheck(8) in userspace.
- */
-#define FS_DQ_BCOUNT		(1<<12)
-#define FS_DQ_ICOUNT		(1<<13)
-#define FS_DQ_RTBCOUNT		(1<<14)
-#define FS_DQ_ACCT_MASK		(FS_DQ_BCOUNT | FS_DQ_ICOUNT | FS_DQ_RTBCOUNT)
-
-/*
- * Various flags related to quotactl(2).
- */
-#define FS_QUOTA_UDQ_ACCT	(1<<0)  /* user quota accounting */
-#define FS_QUOTA_UDQ_ENFD	(1<<1)  /* user quota limits enforcement */
-#define FS_QUOTA_GDQ_ACCT	(1<<2)  /* group quota accounting */
-#define FS_QUOTA_GDQ_ENFD	(1<<3)  /* group quota limits enforcement */
-#define FS_QUOTA_PDQ_ACCT	(1<<4)  /* project quota accounting */
-#define FS_QUOTA_PDQ_ENFD	(1<<5)  /* project quota limits enforcement */
-
-#define FS_USER_QUOTA		(1<<0)	/* user quota type */
-#define FS_PROJ_QUOTA		(1<<1)	/* project quota type */
-#define FS_GROUP_QUOTA		(1<<2)	/* group quota type */
-
-/*
- * fs_quota_stat is the struct returned in Q_XGETQSTAT for a given file system.
- * Provides a centralized way to get meta information about the quota subsystem.
- * eg. space taken up for user and group quotas, number of dquots currently
- * incore.
- */
-#define FS_QSTAT_VERSION	1	/* fs_quota_stat.qs_version */
-
-/*
- * Some basic information about 'quota files'.
- */
-typedef struct fs_qfilestat {
-	__u64		qfs_ino;	/* inode number */
-	__u64		qfs_nblks;	/* number of BBs 512-byte-blks */
-	__u32		qfs_nextents;	/* number of extents */
-} fs_qfilestat_t;
-
-typedef struct fs_quota_stat {
-	__s8		qs_version;	/* version number for future changes */
-	__u16		qs_flags;	/* FS_QUOTA_{U,P,G}DQ_{ACCT,ENFD} */
-	__s8		qs_pad;		/* unused */
-	fs_qfilestat_t	qs_uquota;	/* user quota storage information */
-	fs_qfilestat_t	qs_gquota;	/* group quota storage information */
-	__u32		qs_incoredqs;	/* number of dquots incore */
-	__s32		qs_btimelimit;  /* limit for blks timer */	
-	__s32		qs_itimelimit;  /* limit for inodes timer */	
-	__s32		qs_rtbtimelimit;/* limit for rt blks timer */	
-	__u16		qs_bwarnlimit;	/* limit for num warnings */
-	__u16		qs_iwarnlimit;	/* limit for num warnings */
-} fs_quota_stat_t;
-
-#endif	/* _LINUX_DQBLK_XFS_H */
diff --git a/include/linux/edd.h b/include/linux/edd.h
index 4cbd0fe9df08..83d4371ec996 100644
--- a/include/linux/edd.h
+++ b/include/linux/edd.h
@@ -30,165 +30,9 @@
 #ifndef _LINUX_EDD_H
 #define _LINUX_EDD_H
 
-#include <linux/types.h>
-
-#define EDDNR 0x1e9		/* addr of number of edd_info structs at EDDBUF
-				   in boot_params - treat this as 1 byte  */
-#define EDDBUF	0xd00		/* addr of edd_info structs in boot_params */
-#define EDDMAXNR 6		/* number of edd_info structs starting at EDDBUF  */
-#define EDDEXTSIZE 8		/* change these if you muck with the structures */
-#define EDDPARMSIZE 74
-#define CHECKEXTENSIONSPRESENT 0x41
-#define GETDEVICEPARAMETERS 0x48
-#define LEGACYGETDEVICEPARAMETERS 0x08
-#define EDDMAGIC1 0x55AA
-#define EDDMAGIC2 0xAA55
-
-
-#define READ_SECTORS 0x02         /* int13 AH=0x02 is READ_SECTORS command */
-#define EDD_MBR_SIG_OFFSET 0x1B8  /* offset of signature in the MBR */
-#define EDD_MBR_SIG_BUF    0x290  /* addr in boot params */
-#define EDD_MBR_SIG_MAX 16        /* max number of signatures to store */
-#define EDD_MBR_SIG_NR_BUF 0x1ea  /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
-				     in boot_params - treat this as 1 byte  */
+#include <uapi/linux/edd.h>
 
 #ifndef __ASSEMBLY__
-
-#define EDD_EXT_FIXED_DISK_ACCESS           (1 << 0)
-#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
-#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
-#define EDD_EXT_64BIT_EXTENSIONS            (1 << 3)
-
-#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
-#define EDD_INFO_GEOMETRY_VALID                (1 << 1)
-#define EDD_INFO_REMOVABLE                     (1 << 2)
-#define EDD_INFO_WRITE_VERIFY                  (1 << 3)
-#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION     (1 << 4)
-#define EDD_INFO_LOCKABLE                      (1 << 5)
-#define EDD_INFO_NO_MEDIA_PRESENT              (1 << 6)
-#define EDD_INFO_USE_INT13_FN50                (1 << 7)
-
-struct edd_device_params {
-	__u16 length;
-	__u16 info_flags;
-	__u32 num_default_cylinders;
-	__u32 num_default_heads;
-	__u32 sectors_per_track;
-	__u64 number_of_sectors;
-	__u16 bytes_per_sector;
-	__u32 dpte_ptr;		/* 0xFFFFFFFF for our purposes */
-	__u16 key;		/* = 0xBEDD */
-	__u8 device_path_info_length;	/* = 44 */
-	__u8 reserved2;
-	__u16 reserved3;
-	__u8 host_bus_type[4];
-	__u8 interface_type[8];
-	union {
-		struct {
-			__u16 base_address;
-			__u16 reserved1;
-			__u32 reserved2;
-		} __attribute__ ((packed)) isa;
-		struct {
-			__u8 bus;
-			__u8 slot;
-			__u8 function;
-			__u8 channel;
-			__u32 reserved;
-		} __attribute__ ((packed)) pci;
-		/* pcix is same as pci */
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) ibnd;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) xprs;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) htpt;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) unknown;
-	} interface_path;
-	union {
-		struct {
-			__u8 device;
-			__u8 reserved1;
-			__u16 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) ata;
-		struct {
-			__u8 device;
-			__u8 lun;
-			__u8 reserved1;
-			__u8 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) atapi;
-		struct {
-			__u16 id;
-			__u64 lun;
-			__u16 reserved1;
-			__u32 reserved2;
-		} __attribute__ ((packed)) scsi;
-		struct {
-			__u64 serial_number;
-			__u64 reserved;
-		} __attribute__ ((packed)) usb;
-		struct {
-			__u64 eui;
-			__u64 reserved;
-		} __attribute__ ((packed)) i1394;
-		struct {
-			__u64 wwid;
-			__u64 lun;
-		} __attribute__ ((packed)) fibre;
-		struct {
-			__u64 identity_tag;
-			__u64 reserved;
-		} __attribute__ ((packed)) i2o;
-		struct {
-			__u32 array_number;
-			__u32 reserved1;
-			__u64 reserved2;
-		} __attribute__ ((packed)) raid;
-		struct {
-			__u8 device;
-			__u8 reserved1;
-			__u16 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) sata;
-		struct {
-			__u64 reserved1;
-			__u64 reserved2;
-		} __attribute__ ((packed)) unknown;
-	} device_path;
-	__u8 reserved4;
-	__u8 checksum;
-} __attribute__ ((packed));
-
-struct edd_info {
-	__u8 device;
-	__u8 version;
-	__u16 interface_support;
-	__u16 legacy_max_cylinder;
-	__u8 legacy_max_head;
-	__u8 legacy_sectors_per_track;
-	struct edd_device_params params;
-} __attribute__ ((packed));
-
-struct edd {
-	unsigned int mbr_signature[EDD_MBR_SIG_MAX];
-	struct edd_info edd_info[EDDMAXNR];
-	unsigned char mbr_signature_nr;
-	unsigned char edd_info_nr;
-};
-
-#ifdef __KERNEL__
 extern struct edd edd;
-#endif /* __KERNEL__ */
 #endif				/*!__ASSEMBLY__ */
-
 #endif				/* _LINUX_EDD_H */
diff --git a/include/linux/efs_fs_sb.h b/include/linux/efs_fs_sb.h
deleted file mode 100644
index a01be90c58cc..000000000000
--- a/include/linux/efs_fs_sb.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * efs_fs_sb.h
- *
- * Copyright (c) 1999 Al Smith
- *
- * Portions derived from IRIX header files (c) 1988 Silicon Graphics
- */
-
-#ifndef __EFS_FS_SB_H__
-#define __EFS_FS_SB_H__
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/* EFS superblock magic numbers */
-#define EFS_MAGIC	0x072959
-#define EFS_NEWMAGIC	0x07295a
-
-#define IS_EFS_MAGIC(x)	((x == EFS_MAGIC) || (x == EFS_NEWMAGIC))
-
-#define EFS_SUPER		1
-#define EFS_ROOTINODE		2
-
-/* efs superblock on disk */
-struct efs_super {
-	__be32		fs_size;        /* size of filesystem, in sectors */
-	__be32		fs_firstcg;     /* bb offset to first cg */
-	__be32		fs_cgfsize;     /* size of cylinder group in bb's */
-	__be16		fs_cgisize;     /* bb's of inodes per cylinder group */
-	__be16		fs_sectors;     /* sectors per track */
-	__be16		fs_heads;       /* heads per cylinder */
-	__be16		fs_ncg;         /* # of cylinder groups in filesystem */
-	__be16		fs_dirty;       /* fs needs to be fsck'd */
-	__be32		fs_time;        /* last super-block update */
-	__be32		fs_magic;       /* magic number */
-	char		fs_fname[6];    /* file system name */
-	char		fs_fpack[6];    /* file system pack name */
-	__be32		fs_bmsize;      /* size of bitmap in bytes */
-	__be32		fs_tfree;       /* total free data blocks */
-	__be32		fs_tinode;      /* total free inodes */
-	__be32		fs_bmblock;     /* bitmap location. */
-	__be32		fs_replsb;      /* Location of replicated superblock. */
-	__be32		fs_lastialloc;  /* last allocated inode */
-	char		fs_spare[20];   /* space for expansion - MUST BE ZERO */
-	__be32		fs_checksum;    /* checksum of volume portion of fs */
-};
-
-/* efs superblock information in memory */
-struct efs_sb_info {
-	__u32	fs_magic;	/* superblock magic number */
-	__u32	fs_start;	/* first block of filesystem */
-	__u32	first_block;	/* first data block in filesystem */
-	__u32	total_blocks;	/* total number of blocks in filesystem */
-	__u32	group_size;	/* # of blocks a group consists of */ 
-	__u32	data_free;	/* # of free data blocks */
-	__u32	inode_free;	/* # of free inodes */
-	__u16	inode_blocks;	/* # of blocks used for inodes in every grp */
-	__u16	total_groups;	/* # of groups */
-};
-
-#endif /* __EFS_FS_SB_H__ */
-
diff --git a/include/linux/elf-em.h b/include/linux/elf-em.h
deleted file mode 100644
index 8e2b7bac4378..000000000000
--- a/include/linux/elf-em.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef _LINUX_ELF_EM_H
-#define _LINUX_ELF_EM_H
-
-/* These constants define the various ELF target machines */
-#define EM_NONE		0
-#define EM_M32		1
-#define EM_SPARC	2
-#define EM_386		3
-#define EM_68K		4
-#define EM_88K		5
-#define EM_486		6	/* Perhaps disused */
-#define EM_860		7
-#define EM_MIPS		8	/* MIPS R3000 (officially, big-endian only) */
-				/* Next two are historical and binaries and
-				   modules of these types will be rejected by
-				   Linux.  */
-#define EM_MIPS_RS3_LE	10	/* MIPS R3000 little-endian */
-#define EM_MIPS_RS4_BE	10	/* MIPS R4000 big-endian */
-
-#define EM_PARISC	15	/* HPPA */
-#define EM_SPARC32PLUS	18	/* Sun's "v8plus" */
-#define EM_PPC		20	/* PowerPC */
-#define EM_PPC64	21	 /* PowerPC64 */
-#define EM_SPU		23	/* Cell BE SPU */
-#define EM_SH		42	/* SuperH */
-#define EM_SPARCV9	43	/* SPARC v9 64-bit */
-#define EM_IA_64	50	/* HP/Intel IA-64 */
-#define EM_X86_64	62	/* AMD x86-64 */
-#define EM_S390		22	/* IBM S/390 */
-#define EM_CRIS		76	/* Axis Communications 32-bit embedded processor */
-#define EM_V850		87	/* NEC v850 */
-#define EM_M32R		88	/* Renesas M32R */
-#define EM_H8_300	46	/* Renesas H8/300,300H,H8S */
-#define EM_MN10300	89	/* Panasonic/MEI MN10300, AM33 */
-#define EM_BLACKFIN     106     /* ADI Blackfin Processor */
-#define EM_TI_C6000	140	/* TI C6X DSPs */
-#define EM_FRV		0x5441	/* Fujitsu FR-V */
-#define EM_AVR32	0x18ad	/* Atmel AVR32 */
-
-/*
- * This is an interim value that we will use until the committee comes
- * up with a final number.
- */
-#define EM_ALPHA	0x9026
-
-/* Bogus old v850 magic number, used by old tools. */
-#define EM_CYGNUS_V850	0x9080
-/* Bogus old m32r magic number, used by old tools. */
-#define EM_CYGNUS_M32R	0x9041
-/* This is the old interim value for S/390 architecture */
-#define EM_S390_OLD	0xA390
-/* Also Panasonic/MEI MN10300, AM33 */
-#define EM_CYGNUS_MN10300 0xbeef
-
-
-#endif /* _LINUX_ELF_EM_H */
diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h
deleted file mode 100644
index 7cd2e80cebc8..000000000000
--- a/include/linux/elf-fdpic.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* elf-fdpic.h: FDPIC ELF load map
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_ELF_FDPIC_H
-#define _LINUX_ELF_FDPIC_H
-
-#include <linux/elf.h>
-
-#define PT_GNU_STACK    (PT_LOOS + 0x474e551)
-
-/* segment mappings for ELF FDPIC libraries/executables/interpreters */
-struct elf32_fdpic_loadseg {
-	Elf32_Addr	addr;		/* core address to which mapped */
-	Elf32_Addr	p_vaddr;	/* VMA recorded in file */
-	Elf32_Word	p_memsz;	/* allocation size recorded in file */
-};
-
-struct elf32_fdpic_loadmap {
-	Elf32_Half	version;	/* version of these structures, just in case... */
-	Elf32_Half	nsegs;		/* number of segments */
-	struct elf32_fdpic_loadseg segs[];
-};
-
-#define ELF32_FDPIC_LOADMAP_VERSION	0x0000
-
-/*
- * binfmt binary parameters structure
- */
-struct elf_fdpic_params {
-	struct elfhdr			hdr;		/* ref copy of ELF header */
-	struct elf_phdr			*phdrs;		/* ref copy of PT_PHDR table */
-	struct elf32_fdpic_loadmap	*loadmap;	/* loadmap to be passed to userspace */
-	unsigned long			elfhdr_addr;	/* mapped ELF header user address */
-	unsigned long			ph_addr;	/* mapped PT_PHDR user address */
-	unsigned long			map_addr;	/* mapped loadmap user address */
-	unsigned long			entry_addr;	/* mapped entry user address */
-	unsigned long			stack_size;	/* stack size requested (PT_GNU_STACK) */
-	unsigned long			dynamic_addr;	/* mapped PT_DYNAMIC user address */
-	unsigned long			load_addr;	/* user address at which to map binary */
-	unsigned long			flags;
-#define ELF_FDPIC_FLAG_ARRANGEMENT	0x0000000f	/* PT_LOAD arrangement flags */
-#define ELF_FDPIC_FLAG_INDEPENDENT	0x00000000	/* PT_LOADs can be put anywhere */
-#define ELF_FDPIC_FLAG_HONOURVADDR	0x00000001	/* PT_LOAD.vaddr must be honoured */
-#define ELF_FDPIC_FLAG_CONSTDISP	0x00000002	/* PT_LOADs require constant
-							 * displacement */
-#define ELF_FDPIC_FLAG_CONTIGUOUS	0x00000003	/* PT_LOADs should be contiguous */
-#define ELF_FDPIC_FLAG_EXEC_STACK	0x00000010	/* T if stack to be executable */
-#define ELF_FDPIC_FLAG_NOEXEC_STACK	0x00000020	/* T if stack not to be executable */
-#define ELF_FDPIC_FLAG_EXECUTABLE	0x00000040	/* T if this object is the executable */
-#define ELF_FDPIC_FLAG_PRESENT		0x80000000	/* T if this object is present */
-};
-
-#ifdef __KERNEL__
-#ifdef CONFIG_MMU
-extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
-				      struct elf_fdpic_params *interp_params,
-				      unsigned long *start_stack,
-				      unsigned long *start_brk);
-#endif
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_ELF_FDPIC_H */
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 59ef40650e1e..8c9048e33463 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -1,420 +1,9 @@
 #ifndef _LINUX_ELF_H
 #define _LINUX_ELF_H
 
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#ifdef __KERNEL__
 #include <asm/elf.h>
-#endif
-
-/* 32-bit ELF base types. */
-typedef __u32	Elf32_Addr;
-typedef __u16	Elf32_Half;
-typedef __u32	Elf32_Off;
-typedef __s32	Elf32_Sword;
-typedef __u32	Elf32_Word;
-
-/* 64-bit ELF base types. */
-typedef __u64	Elf64_Addr;
-typedef __u16	Elf64_Half;
-typedef __s16	Elf64_SHalf;
-typedef __u64	Elf64_Off;
-typedef __s32	Elf64_Sword;
-typedef __u32	Elf64_Word;
-typedef __u64	Elf64_Xword;
-typedef __s64	Elf64_Sxword;
-
-/* These constants are for the segment types stored in the image headers */
-#define PT_NULL    0
-#define PT_LOAD    1
-#define PT_DYNAMIC 2
-#define PT_INTERP  3
-#define PT_NOTE    4
-#define PT_SHLIB   5
-#define PT_PHDR    6
-#define PT_TLS     7               /* Thread local storage segment */
-#define PT_LOOS    0x60000000      /* OS-specific */
-#define PT_HIOS    0x6fffffff      /* OS-specific */
-#define PT_LOPROC  0x70000000
-#define PT_HIPROC  0x7fffffff
-#define PT_GNU_EH_FRAME		0x6474e550
-
-#define PT_GNU_STACK	(PT_LOOS + 0x474e551)
-
-/*
- * Extended Numbering
- *
- * If the real number of program header table entries is larger than
- * or equal to PN_XNUM(0xffff), it is set to sh_info field of the
- * section header at index 0, and PN_XNUM is set to e_phnum
- * field. Otherwise, the section header at index 0 is zero
- * initialized, if it exists.
- *
- * Specifications are available in:
- *
- * - Sun microsystems: Linker and Libraries.
- *   Part No: 817-1984-17, September 2008.
- *   URL: http://docs.sun.com/app/docs/doc/817-1984
- *
- * - System V ABI AMD64 Architecture Processor Supplement
- *   Draft Version 0.99.,
- *   May 11, 2009.
- *   URL: http://www.x86-64.org/
- */
-#define PN_XNUM 0xffff
-
-/* These constants define the different elf file types */
-#define ET_NONE   0
-#define ET_REL    1
-#define ET_EXEC   2
-#define ET_DYN    3
-#define ET_CORE   4
-#define ET_LOPROC 0xff00
-#define ET_HIPROC 0xffff
-
-/* This is the info that is needed to parse the dynamic section of the file */
-#define DT_NULL		0
-#define DT_NEEDED	1
-#define DT_PLTRELSZ	2
-#define DT_PLTGOT	3
-#define DT_HASH		4
-#define DT_STRTAB	5
-#define DT_SYMTAB	6
-#define DT_RELA		7
-#define DT_RELASZ	8
-#define DT_RELAENT	9
-#define DT_STRSZ	10
-#define DT_SYMENT	11
-#define DT_INIT		12
-#define DT_FINI		13
-#define DT_SONAME	14
-#define DT_RPATH 	15
-#define DT_SYMBOLIC	16
-#define DT_REL	        17
-#define DT_RELSZ	18
-#define DT_RELENT	19
-#define DT_PLTREL	20
-#define DT_DEBUG	21
-#define DT_TEXTREL	22
-#define DT_JMPREL	23
-#define DT_ENCODING	32
-#define OLD_DT_LOOS	0x60000000
-#define DT_LOOS		0x6000000d
-#define DT_HIOS		0x6ffff000
-#define DT_VALRNGLO	0x6ffffd00
-#define DT_VALRNGHI	0x6ffffdff
-#define DT_ADDRRNGLO	0x6ffffe00
-#define DT_ADDRRNGHI	0x6ffffeff
-#define DT_VERSYM	0x6ffffff0
-#define DT_RELACOUNT	0x6ffffff9
-#define DT_RELCOUNT	0x6ffffffa
-#define DT_FLAGS_1	0x6ffffffb
-#define DT_VERDEF	0x6ffffffc
-#define	DT_VERDEFNUM	0x6ffffffd
-#define DT_VERNEED	0x6ffffffe
-#define	DT_VERNEEDNUM	0x6fffffff
-#define OLD_DT_HIOS     0x6fffffff
-#define DT_LOPROC	0x70000000
-#define DT_HIPROC	0x7fffffff
-
-/* This info is needed when parsing the symbol table */
-#define STB_LOCAL  0
-#define STB_GLOBAL 1
-#define STB_WEAK   2
-
-#define STT_NOTYPE  0
-#define STT_OBJECT  1
-#define STT_FUNC    2
-#define STT_SECTION 3
-#define STT_FILE    4
-#define STT_COMMON  5
-#define STT_TLS     6
-
-#define ELF_ST_BIND(x)		((x) >> 4)
-#define ELF_ST_TYPE(x)		(((unsigned int) x) & 0xf)
-#define ELF32_ST_BIND(x)	ELF_ST_BIND(x)
-#define ELF32_ST_TYPE(x)	ELF_ST_TYPE(x)
-#define ELF64_ST_BIND(x)	ELF_ST_BIND(x)
-#define ELF64_ST_TYPE(x)	ELF_ST_TYPE(x)
-
-typedef struct dynamic{
-  Elf32_Sword d_tag;
-  union{
-    Elf32_Sword	d_val;
-    Elf32_Addr	d_ptr;
-  } d_un;
-} Elf32_Dyn;
-
-typedef struct {
-  Elf64_Sxword d_tag;		/* entry tag value */
-  union {
-    Elf64_Xword d_val;
-    Elf64_Addr d_ptr;
-  } d_un;
-} Elf64_Dyn;
-
-/* The following are used with relocations */
-#define ELF32_R_SYM(x) ((x) >> 8)
-#define ELF32_R_TYPE(x) ((x) & 0xff)
-
-#define ELF64_R_SYM(i)			((i) >> 32)
-#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
-
-typedef struct elf32_rel {
-  Elf32_Addr	r_offset;
-  Elf32_Word	r_info;
-} Elf32_Rel;
-
-typedef struct elf64_rel {
-  Elf64_Addr r_offset;	/* Location at which to apply the action */
-  Elf64_Xword r_info;	/* index and type of relocation */
-} Elf64_Rel;
-
-typedef struct elf32_rela{
-  Elf32_Addr	r_offset;
-  Elf32_Word	r_info;
-  Elf32_Sword	r_addend;
-} Elf32_Rela;
-
-typedef struct elf64_rela {
-  Elf64_Addr r_offset;	/* Location at which to apply the action */
-  Elf64_Xword r_info;	/* index and type of relocation */
-  Elf64_Sxword r_addend;	/* Constant addend used to compute value */
-} Elf64_Rela;
-
-typedef struct elf32_sym{
-  Elf32_Word	st_name;
-  Elf32_Addr	st_value;
-  Elf32_Word	st_size;
-  unsigned char	st_info;
-  unsigned char	st_other;
-  Elf32_Half	st_shndx;
-} Elf32_Sym;
-
-typedef struct elf64_sym {
-  Elf64_Word st_name;		/* Symbol name, index in string tbl */
-  unsigned char	st_info;	/* Type and binding attributes */
-  unsigned char	st_other;	/* No defined meaning, 0 */
-  Elf64_Half st_shndx;		/* Associated section index */
-  Elf64_Addr st_value;		/* Value of the symbol */
-  Elf64_Xword st_size;		/* Associated symbol size */
-} Elf64_Sym;
-
-
-#define EI_NIDENT	16
-
-typedef struct elf32_hdr{
-  unsigned char	e_ident[EI_NIDENT];
-  Elf32_Half	e_type;
-  Elf32_Half	e_machine;
-  Elf32_Word	e_version;
-  Elf32_Addr	e_entry;  /* Entry point */
-  Elf32_Off	e_phoff;
-  Elf32_Off	e_shoff;
-  Elf32_Word	e_flags;
-  Elf32_Half	e_ehsize;
-  Elf32_Half	e_phentsize;
-  Elf32_Half	e_phnum;
-  Elf32_Half	e_shentsize;
-  Elf32_Half	e_shnum;
-  Elf32_Half	e_shstrndx;
-} Elf32_Ehdr;
-
-typedef struct elf64_hdr {
-  unsigned char	e_ident[EI_NIDENT];	/* ELF "magic number" */
-  Elf64_Half e_type;
-  Elf64_Half e_machine;
-  Elf64_Word e_version;
-  Elf64_Addr e_entry;		/* Entry point virtual address */
-  Elf64_Off e_phoff;		/* Program header table file offset */
-  Elf64_Off e_shoff;		/* Section header table file offset */
-  Elf64_Word e_flags;
-  Elf64_Half e_ehsize;
-  Elf64_Half e_phentsize;
-  Elf64_Half e_phnum;
-  Elf64_Half e_shentsize;
-  Elf64_Half e_shnum;
-  Elf64_Half e_shstrndx;
-} Elf64_Ehdr;
-
-/* These constants define the permissions on sections in the program
-   header, p_flags. */
-#define PF_R		0x4
-#define PF_W		0x2
-#define PF_X		0x1
-
-typedef struct elf32_phdr{
-  Elf32_Word	p_type;
-  Elf32_Off	p_offset;
-  Elf32_Addr	p_vaddr;
-  Elf32_Addr	p_paddr;
-  Elf32_Word	p_filesz;
-  Elf32_Word	p_memsz;
-  Elf32_Word	p_flags;
-  Elf32_Word	p_align;
-} Elf32_Phdr;
-
-typedef struct elf64_phdr {
-  Elf64_Word p_type;
-  Elf64_Word p_flags;
-  Elf64_Off p_offset;		/* Segment file offset */
-  Elf64_Addr p_vaddr;		/* Segment virtual address */
-  Elf64_Addr p_paddr;		/* Segment physical address */
-  Elf64_Xword p_filesz;		/* Segment size in file */
-  Elf64_Xword p_memsz;		/* Segment size in memory */
-  Elf64_Xword p_align;		/* Segment alignment, file & memory */
-} Elf64_Phdr;
-
-/* sh_type */
-#define SHT_NULL	0
-#define SHT_PROGBITS	1
-#define SHT_SYMTAB	2
-#define SHT_STRTAB	3
-#define SHT_RELA	4
-#define SHT_HASH	5
-#define SHT_DYNAMIC	6
-#define SHT_NOTE	7
-#define SHT_NOBITS	8
-#define SHT_REL		9
-#define SHT_SHLIB	10
-#define SHT_DYNSYM	11
-#define SHT_NUM		12
-#define SHT_LOPROC	0x70000000
-#define SHT_HIPROC	0x7fffffff
-#define SHT_LOUSER	0x80000000
-#define SHT_HIUSER	0xffffffff
-
-/* sh_flags */
-#define SHF_WRITE	0x1
-#define SHF_ALLOC	0x2
-#define SHF_EXECINSTR	0x4
-#define SHF_MASKPROC	0xf0000000
-
-/* special section indexes */
-#define SHN_UNDEF	0
-#define SHN_LORESERVE	0xff00
-#define SHN_LOPROC	0xff00
-#define SHN_HIPROC	0xff1f
-#define SHN_ABS		0xfff1
-#define SHN_COMMON	0xfff2
-#define SHN_HIRESERVE	0xffff
- 
-typedef struct elf32_shdr {
-  Elf32_Word	sh_name;
-  Elf32_Word	sh_type;
-  Elf32_Word	sh_flags;
-  Elf32_Addr	sh_addr;
-  Elf32_Off	sh_offset;
-  Elf32_Word	sh_size;
-  Elf32_Word	sh_link;
-  Elf32_Word	sh_info;
-  Elf32_Word	sh_addralign;
-  Elf32_Word	sh_entsize;
-} Elf32_Shdr;
-
-typedef struct elf64_shdr {
-  Elf64_Word sh_name;		/* Section name, index in string tbl */
-  Elf64_Word sh_type;		/* Type of section */
-  Elf64_Xword sh_flags;		/* Miscellaneous section attributes */
-  Elf64_Addr sh_addr;		/* Section virtual addr at execution */
-  Elf64_Off sh_offset;		/* Section file offset */
-  Elf64_Xword sh_size;		/* Size of section in bytes */
-  Elf64_Word sh_link;		/* Index of another section */
-  Elf64_Word sh_info;		/* Additional section information */
-  Elf64_Xword sh_addralign;	/* Section alignment */
-  Elf64_Xword sh_entsize;	/* Entry size if section holds table */
-} Elf64_Shdr;
-
-#define	EI_MAG0		0		/* e_ident[] indexes */
-#define	EI_MAG1		1
-#define	EI_MAG2		2
-#define	EI_MAG3		3
-#define	EI_CLASS	4
-#define	EI_DATA		5
-#define	EI_VERSION	6
-#define	EI_OSABI	7
-#define	EI_PAD		8
-
-#define	ELFMAG0		0x7f		/* EI_MAG */
-#define	ELFMAG1		'E'
-#define	ELFMAG2		'L'
-#define	ELFMAG3		'F'
-#define	ELFMAG		"\177ELF"
-#define	SELFMAG		4
-
-#define	ELFCLASSNONE	0		/* EI_CLASS */
-#define	ELFCLASS32	1
-#define	ELFCLASS64	2
-#define	ELFCLASSNUM	3
-
-#define ELFDATANONE	0		/* e_ident[EI_DATA] */
-#define ELFDATA2LSB	1
-#define ELFDATA2MSB	2
-
-#define EV_NONE		0		/* e_version, EI_VERSION */
-#define EV_CURRENT	1
-#define EV_NUM		2
-
-#define ELFOSABI_NONE	0
-#define ELFOSABI_LINUX	3
-
-#ifndef ELF_OSABI
-#define ELF_OSABI ELFOSABI_NONE
-#endif
-
-/*
- * Notes used in ET_CORE. Architectures export some of the arch register sets
- * using the corresponding note types via the PTRACE_GETREGSET and
- * PTRACE_SETREGSET requests.
- */
-#define NT_PRSTATUS	1
-#define NT_PRFPREG	2
-#define NT_PRPSINFO	3
-#define NT_TASKSTRUCT	4
-#define NT_AUXV		6
-/*
- * Note to userspace developers: size of NT_SIGINFO note may increase
- * in the future to accomodate more fields, don't assume it is fixed!
- */
-#define NT_SIGINFO      0x53494749
-#define NT_FILE         0x46494c45
-#define NT_PRXFPREG     0x46e62b7f      /* copied from gdb5.1/include/elf/common.h */
-#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
-#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
-#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
-#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
-#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
-#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
-#define NT_S390_HIGH_GPRS	0x300	/* s390 upper register halves */
-#define NT_S390_TIMER	0x301		/* s390 timer register */
-#define NT_S390_TODCMP	0x302		/* s390 TOD clock comparator register */
-#define NT_S390_TODPREG	0x303		/* s390 TOD programmable register */
-#define NT_S390_CTRS	0x304		/* s390 control registers */
-#define NT_S390_PREFIX	0x305		/* s390 prefix register */
-#define NT_S390_LAST_BREAK	0x306	/* s390 breaking event address */
-#define NT_S390_SYSTEM_CALL	0x307	/* s390 system call restart data */
-#define NT_S390_TDB	0x308		/* s390 transaction diagnostic block */
-#define NT_ARM_VFP	0x400		/* ARM VFP/NEON registers */
-#define NT_ARM_TLS	0x401		/* ARM TLS register */
-#define NT_ARM_HW_BREAK	0x402		/* ARM hardware breakpoint registers */
-#define NT_ARM_HW_WATCH	0x403		/* ARM hardware watchpoint registers */
-
-
-/* Note header in a PT_NOTE section */
-typedef struct elf32_note {
-  Elf32_Word	n_namesz;	/* Name size */
-  Elf32_Word	n_descsz;	/* Content size */
-  Elf32_Word	n_type;		/* Content type */
-} Elf32_Nhdr;
-
-/* Note header in a PT_NOTE section */
-typedef struct elf64_note {
-  Elf64_Word n_namesz;	/* Name size */
-  Elf64_Word n_descsz;	/* Content size */
-  Elf64_Word n_type;	/* Content type */
-} Elf64_Nhdr;
+#include <uapi/linux/elf.h>
 
-#ifdef __KERNEL__
 #ifndef elf_read_implies_exec
   /* Executables for which elf_read_implies_exec() returns TRUE will
      have the READ_IMPLIES_EXEC personality flag set automatically.
@@ -455,5 +44,4 @@ static inline int elf_coredump_extra_notes_write(struct file *file,
 extern int elf_coredump_extra_notes_size(void);
 extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset);
 #endif
-#endif /* __KERNEL__ */
 #endif /* _LINUX_ELF_H */
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
index 0698c79fbcb2..cdd3d13efce7 100644
--- a/include/linux/elfcore.h
+++ b/include/linux/elfcore.h
@@ -1,109 +1,11 @@
 #ifndef _LINUX_ELFCORE_H
 #define _LINUX_ELFCORE_H
 
-#include <linux/types.h>
-#include <linux/signal.h>
-#include <linux/time.h>
-#ifdef __KERNEL__
 #include <linux/user.h>
 #include <linux/bug.h>
-#endif
-#include <linux/ptrace.h>
-#include <linux/elf.h>
-#include <linux/fs.h>
-
-struct elf_siginfo
-{
-	int	si_signo;			/* signal number */
-	int	si_code;			/* extra code */
-	int	si_errno;			/* errno */
-};
-
-#ifdef __KERNEL__
 #include <asm/elf.h>
-#endif
+#include <uapi/linux/elfcore.h>
 
-#ifndef __KERNEL__
-typedef elf_greg_t greg_t;
-typedef elf_gregset_t gregset_t;
-typedef elf_fpregset_t fpregset_t;
-typedef elf_fpxregset_t fpxregset_t;
-#define NGREG ELF_NGREG
-#endif
-
-/*
- * Definitions to generate Intel SVR4-like core files.
- * These mostly have the same names as the SVR4 types with "elf_"
- * tacked on the front to prevent clashes with linux definitions,
- * and the typedef forms have been avoided.  This is mostly like
- * the SVR4 structure, but more Linuxy, with things that Linux does
- * not support and which gdb doesn't really use excluded.
- * Fields present but not used are marked with "XXX".
- */
-struct elf_prstatus
-{
-#if 0
-	long	pr_flags;	/* XXX Process flags */
-	short	pr_why;		/* XXX Reason for process halt */
-	short	pr_what;	/* XXX More detailed reason */
-#endif
-	struct elf_siginfo pr_info;	/* Info associated with signal */
-	short	pr_cursig;		/* Current signal */
-	unsigned long pr_sigpend;	/* Set of pending signals */
-	unsigned long pr_sighold;	/* Set of held signals */
-#if 0
-	struct sigaltstack pr_altstack;	/* Alternate stack info */
-	struct sigaction pr_action;	/* Signal action for current sig */
-#endif
-	pid_t	pr_pid;
-	pid_t	pr_ppid;
-	pid_t	pr_pgrp;
-	pid_t	pr_sid;
-	struct timeval pr_utime;	/* User time */
-	struct timeval pr_stime;	/* System time */
-	struct timeval pr_cutime;	/* Cumulative user time */
-	struct timeval pr_cstime;	/* Cumulative system time */
-#if 0
-	long	pr_instr;		/* Current instruction */
-#endif
-	elf_gregset_t pr_reg;	/* GP registers */
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-	/* When using FDPIC, the loadmap addresses need to be communicated
-	 * to GDB in order for GDB to do the necessary relocations.  The
-	 * fields (below) used to communicate this information are placed
-	 * immediately after ``pr_reg'', so that the loadmap addresses may
-	 * be viewed as part of the register set if so desired.
-	 */
-	unsigned long pr_exec_fdpic_loadmap;
-	unsigned long pr_interp_fdpic_loadmap;
-#endif
-	int pr_fpvalid;		/* True if math co-processor being used.  */
-};
-
-#define ELF_PRARGSZ	(80)	/* Number of chars for args */
-
-struct elf_prpsinfo
-{
-	char	pr_state;	/* numeric process state */
-	char	pr_sname;	/* char for pr_state */
-	char	pr_zomb;	/* zombie */
-	char	pr_nice;	/* nice val */
-	unsigned long pr_flag;	/* flags */
-	__kernel_uid_t	pr_uid;
-	__kernel_gid_t	pr_gid;
-	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
-	/* Lots missing */
-	char	pr_fname[16];	/* filename of executable */
-	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
-};
-
-#ifndef __KERNEL__
-typedef struct elf_prstatus prstatus_t;
-typedef struct elf_prpsinfo prpsinfo_t;
-#define PRARGSZ ELF_PRARGSZ 
-#endif
-
-#ifdef __KERNEL__
 static inline void elf_core_copy_regs(elf_gregset_t *elfregs, struct pt_regs *regs)
 {
 #ifdef ELF_CORE_COPY_REGS
@@ -167,6 +69,4 @@ extern int
 elf_core_write_extra_data(struct file *file, size_t *size, unsigned long limit);
 extern size_t elf_core_extra_data_size(void);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_ELFCORE_H */
diff --git a/include/linux/errno.h b/include/linux/errno.h
index e0de516374da..f6bf082d4d4f 100644
--- a/include/linux/errno.h
+++ b/include/linux/errno.h
@@ -1,9 +1,8 @@
 #ifndef _LINUX_ERRNO_H
 #define _LINUX_ERRNO_H
 
-#include <asm/errno.h>
+#include <uapi/linux/errno.h>
 
-#ifdef __KERNEL__
 
 /*
  * These should never be seen by user programs.  To return one of ERESTART*
@@ -32,5 +31,3 @@
 #define EIOCBRETRY	530	/* iocb queued, will trigger a retry */
 
 #endif
-
-#endif
diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h
index fd0628be45ce..9ca23fcfb5d7 100644
--- a/include/linux/errqueue.h
+++ b/include/linux/errqueue.h
@@ -1,33 +1,12 @@
 #ifndef _LINUX_ERRQUEUE_H
 #define _LINUX_ERRQUEUE_H 1
 
-#include <linux/types.h>
-
-struct sock_extended_err {
-	__u32	ee_errno;	
-	__u8	ee_origin;
-	__u8	ee_type;
-	__u8	ee_code;
-	__u8	ee_pad;
-	__u32   ee_info;
-	__u32   ee_data;
-};
-
-#define SO_EE_ORIGIN_NONE	0
-#define SO_EE_ORIGIN_LOCAL	1
-#define SO_EE_ORIGIN_ICMP	2
-#define SO_EE_ORIGIN_ICMP6	3
-#define SO_EE_ORIGIN_TXSTATUS	4
-#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS
-
-#define SO_EE_OFFENDER(ee)	((struct sockaddr*)((ee)+1))
-
-#ifdef __KERNEL__
 
 #include <net/ip.h>
 #if IS_ENABLED(CONFIG_IPV6)
 #include <linux/ipv6.h>
 #endif
+#include <uapi/linux/errqueue.h>
 
 #define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb))
 
@@ -44,5 +23,3 @@ struct sock_exterr_skb {
 };
 
 #endif
-
-#endif
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index fcb4f8e60c1c..c8e3e7e39c6b 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -9,596 +9,12 @@
  *                                scott.feldman@intel.com)
  * Portions Copyright (C) Sun Microsystems 2008
  */
-
 #ifndef _LINUX_ETHTOOL_H
 #define _LINUX_ETHTOOL_H
 
-#ifdef __KERNEL__
 #include <linux/compat.h>
-#endif
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-/* This should work for both 32 and 64 bit userland. */
-struct ethtool_cmd {
-	__u32	cmd;
-	__u32	supported;	/* Features this interface supports */
-	__u32	advertising;	/* Features this interface advertises */
-	__u16	speed;	        /* The forced speed (lower bits) in
-				 * Mbps. Please use
-				 * ethtool_cmd_speed()/_set() to
-				 * access it */
-	__u8	duplex;		/* Duplex, half or full */
-	__u8	port;		/* Which connector port */
-	__u8	phy_address;	/* MDIO PHY address (PRTAD for clause 45).
-				 * May be read-only or read-write
-				 * depending on the driver.
-				 */
-	__u8	transceiver;	/* Which transceiver to use */
-	__u8	autoneg;	/* Enable or disable autonegotiation */
-	__u8	mdio_support;	/* MDIO protocols supported.  Read-only.
-				 * Not set by all drivers.
-				 */
-	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
-	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u16	speed_hi;       /* The forced speed (upper
-				 * bits) in Mbps. Please use
-				 * ethtool_cmd_speed()/_set() to
-				 * access it */
-	__u8	eth_tp_mdix;	/* twisted pair MDI-X status */
-	__u8    eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
-				   * link should be renegotiated if necessary
-				   */
-	__u32	lp_advertising;	/* Features the link partner advertises */
-	__u32	reserved[2];
-};
-
-static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
-					 __u32 speed)
-{
-
-	ep->speed = (__u16)speed;
-	ep->speed_hi = (__u16)(speed >> 16);
-}
-
-static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
-{
-	return (ep->speed_hi << 16) | ep->speed;
-}
-
-/* Device supports clause 22 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h>.  This should not be
- * set if there are known to be no such peripherals present or if
- * the driver only emulates clause 22 registers for compatibility.
- */
-#define ETH_MDIO_SUPPORTS_C22	1
-
-/* Device supports clause 45 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
- * This should not be set if there are known to be no such peripherals
- * present.
- */
-#define ETH_MDIO_SUPPORTS_C45	2
-
-#define ETHTOOL_FWVERS_LEN	32
-#define ETHTOOL_BUSINFO_LEN	32
-/* these strings are set to whatever the driver author decides... */
-struct ethtool_drvinfo {
-	__u32	cmd;
-	char	driver[32];	/* driver short name, "tulip", "eepro100" */
-	char	version[32];	/* driver version string */
-	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
-	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
-				/* For PCI devices, use pci_name(pci_dev). */
-	char	reserved1[32];
-	char	reserved2[12];
-				/*
-				 * Some struct members below are filled in
-				 * using ops->get_sset_count().  Obtaining
-				 * this info from ethtool_drvinfo is now
-				 * deprecated; Use ETHTOOL_GSSET_INFO
-				 * instead.
-				 */
-	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
-	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
-	__u32	testinfo_len;
-	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
-	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
-};
-
-#define SOPASS_MAX	6
-/* wake-on-lan settings */
-struct ethtool_wolinfo {
-	__u32	cmd;
-	__u32	supported;
-	__u32	wolopts;
-	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
-};
-
-/* for passing single values */
-struct ethtool_value {
-	__u32	cmd;
-	__u32	data;
-};
-
-/* for passing big chunks of data */
-struct ethtool_regs {
-	__u32	cmd;
-	__u32	version; /* driver-specific, indicates different chips/revs */
-	__u32	len; /* bytes */
-	__u8	data[0];
-};
-
-/* for passing EEPROM chunks */
-struct ethtool_eeprom {
-	__u32	cmd;
-	__u32	magic;
-	__u32	offset; /* in bytes */
-	__u32	len; /* in bytes */
-	__u8	data[0];
-};
-
-/**
- * struct ethtool_eee - Energy Efficient Ethernet information
- * @cmd: ETHTOOL_{G,S}EEE
- * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
- *	for which there is EEE support.
- * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
- *	advertised as eee capable.
- * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
- *	combinations advertised by the link partner as eee capable.
- * @eee_active: Result of the eee auto negotiation.
- * @eee_enabled: EEE configured mode (enabled/disabled).
- * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
- *	that eee was negotiated.
- * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
- *	its tx lpi (after reaching 'idle' state). Effective only when eee
- *	was negotiated and tx_lpi_enabled was set.
- */
-struct ethtool_eee {
-	__u32	cmd;
-	__u32	supported;
-	__u32	advertised;
-	__u32	lp_advertised;
-	__u32	eee_active;
-	__u32	eee_enabled;
-	__u32	tx_lpi_enabled;
-	__u32	tx_lpi_timer;
-	__u32	reserved[2];
-};
-
-/**
- * struct ethtool_modinfo - plugin module eeprom information
- * @cmd: %ETHTOOL_GMODULEINFO
- * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
- * @eeprom_len: Length of the eeprom
- *
- * This structure is used to return the information to
- * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
- * The type code indicates the eeprom data format
- */
-struct ethtool_modinfo {
-	__u32   cmd;
-	__u32   type;
-	__u32   eeprom_len;
-	__u32   reserved[8];
-};
-
-/**
- * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
- * @cmd: ETHTOOL_{G,S}COALESCE
- * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
- *	a packet arrives.
- * @rx_max_coalesced_frames: Maximum number of packets to receive
- *	before an RX interrupt.
- * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
- *	this value applies while an IRQ is being serviced by the host.
- * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
- *	except that this value applies while an IRQ is being serviced
- *	by the host.
- * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
- *	a packet is sent.
- * @tx_max_coalesced_frames: Maximum number of packets to be sent
- *	before a TX interrupt.
- * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
- *	this value applies while an IRQ is being serviced by the host.
- * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
- *	except that this value applies while an IRQ is being serviced
- *	by the host.
- * @stats_block_coalesce_usecs: How many usecs to delay in-memory
- *	statistics block updates.  Some drivers do not have an
- *	in-memory statistic block, and in such cases this value is
- *	ignored.  This value must not be zero.
- * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
- * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
- * @pkt_rate_low: Threshold for low packet rate (packets per second).
- * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
- *	a packet arrives, when the packet rate is below @pkt_rate_low.
- * @rx_max_coalesced_frames_low: Maximum number of packets to be received
- *	before an RX interrupt, when the packet rate is below @pkt_rate_low.
- * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
- *	a packet is sent, when the packet rate is below @pkt_rate_low.
- * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
- *	a TX interrupt, when the packet rate is below @pkt_rate_low.
- * @pkt_rate_high: Threshold for high packet rate (packets per second).
- * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
- *	a packet arrives, when the packet rate is above @pkt_rate_high.
- * @rx_max_coalesced_frames_high: Maximum number of packets to be received
- *	before an RX interrupt, when the packet rate is above @pkt_rate_high.
- * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
- *	a packet is sent, when the packet rate is above @pkt_rate_high.
- * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
- *	a TX interrupt, when the packet rate is above @pkt_rate_high.
- * @rate_sample_interval: How often to do adaptive coalescing packet rate
- *	sampling, measured in seconds.  Must not be zero.
- *
- * Each pair of (usecs, max_frames) fields specifies this exit
- * condition for interrupt coalescing:
- *	(usecs > 0 && time_since_first_completion >= usecs) ||
- *	(max_frames > 0 && completed_frames >= max_frames)
- * It is illegal to set both usecs and max_frames to zero as this
- * would cause interrupts to never be generated.  To disable
- * coalescing, set usecs = 0 and max_frames = 1.
- *
- * Some implementations ignore the value of max_frames and use the
- * condition:
- *	time_since_first_completion >= usecs
- * This is deprecated.  Drivers for hardware that does not support
- * counting completions should validate that max_frames == !rx_usecs.
- *
- * Adaptive RX/TX coalescing is an algorithm implemented by some
- * drivers to improve latency under low packet rates and improve
- * throughput under high packet rates.  Some drivers only implement
- * one of RX or TX adaptive coalescing.  Anything not implemented by
- * the driver causes these values to be silently ignored.
- *
- * When the packet rate is below @pkt_rate_high but above
- * @pkt_rate_low (both measured in packets per second) the
- * normal {rx,tx}_* coalescing parameters are used.
- */
-struct ethtool_coalesce {
-	__u32	cmd;
-	__u32	rx_coalesce_usecs;
-	__u32	rx_max_coalesced_frames;
-	__u32	rx_coalesce_usecs_irq;
-	__u32	rx_max_coalesced_frames_irq;
-	__u32	tx_coalesce_usecs;
-	__u32	tx_max_coalesced_frames;
-	__u32	tx_coalesce_usecs_irq;
-	__u32	tx_max_coalesced_frames_irq;
-	__u32	stats_block_coalesce_usecs;
-	__u32	use_adaptive_rx_coalesce;
-	__u32	use_adaptive_tx_coalesce;
-	__u32	pkt_rate_low;
-	__u32	rx_coalesce_usecs_low;
-	__u32	rx_max_coalesced_frames_low;
-	__u32	tx_coalesce_usecs_low;
-	__u32	tx_max_coalesced_frames_low;
-	__u32	pkt_rate_high;
-	__u32	rx_coalesce_usecs_high;
-	__u32	rx_max_coalesced_frames_high;
-	__u32	tx_coalesce_usecs_high;
-	__u32	tx_max_coalesced_frames_high;
-	__u32	rate_sample_interval;
-};
-
-/* for configuring RX/TX ring parameters */
-struct ethtool_ringparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
-
-	/* Read only attributes.  These indicate the maximum number
-	 * of pending RX/TX ring entries the driver will allow the
-	 * user to set.
-	 */
-	__u32	rx_max_pending;
-	__u32	rx_mini_max_pending;
-	__u32	rx_jumbo_max_pending;
-	__u32	tx_max_pending;
-
-	/* Values changeable by the user.  The valid values are
-	 * in the range 1 to the "*_max_pending" counterpart above.
-	 */
-	__u32	rx_pending;
-	__u32	rx_mini_pending;
-	__u32	rx_jumbo_pending;
-	__u32	tx_pending;
-};
-
-/**
- * struct ethtool_channels - configuring number of network channel
- * @cmd: ETHTOOL_{G,S}CHANNELS
- * @max_rx: Read only. Maximum number of receive channel the driver support.
- * @max_tx: Read only. Maximum number of transmit channel the driver support.
- * @max_other: Read only. Maximum number of other channel the driver support.
- * @max_combined: Read only. Maximum number of combined channel the driver
- *	support. Set of queues RX, TX or other.
- * @rx_count: Valid values are in the range 1 to the max_rx.
- * @tx_count: Valid values are in the range 1 to the max_tx.
- * @other_count: Valid values are in the range 1 to the max_other.
- * @combined_count: Valid values are in the range 1 to the max_combined.
- *
- * This can be used to configure RX, TX and other channels.
- */
-
-struct ethtool_channels {
-	__u32	cmd;
-	__u32	max_rx;
-	__u32	max_tx;
-	__u32	max_other;
-	__u32	max_combined;
-	__u32	rx_count;
-	__u32	tx_count;
-	__u32	other_count;
-	__u32	combined_count;
-};
-
-/* for configuring link flow control parameters */
-struct ethtool_pauseparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
-
-	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
-	 * being true) the user may set 'autoneg' here non-zero to have the
-	 * pause parameters be auto-negotiated too.  In such a case, the
-	 * {rx,tx}_pause values below determine what capabilities are
-	 * advertised.
-	 *
-	 * If 'autoneg' is zero or the link is not being auto-negotiated,
-	 * then {rx,tx}_pause force the driver to use/not-use pause
-	 * flow control.
-	 */
-	__u32	autoneg;
-	__u32	rx_pause;
-	__u32	tx_pause;
-};
-
-#define ETH_GSTRING_LEN		32
-enum ethtool_stringset {
-	ETH_SS_TEST		= 0,
-	ETH_SS_STATS,
-	ETH_SS_PRIV_FLAGS,
-	ETH_SS_NTUPLE_FILTERS,	/* Do not use, GRXNTUPLE is now deprecated */
-	ETH_SS_FEATURES,
-};
-
-/* for passing string sets for data tagging */
-struct ethtool_gstrings {
-	__u32	cmd;		/* ETHTOOL_GSTRINGS */
-	__u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
-	__u32	len;		/* number of strings in the string set */
-	__u8	data[0];
-};
-
-struct ethtool_sset_info {
-	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
-	__u32	reserved;
-	__u64	sset_mask;	/* input: each bit selects an sset to query */
-				/* output: each bit a returned sset */
-	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
-				   in sset_mask.  One bit implies one
-				   __u32, two bits implies two
-				   __u32's, etc. */
-};
-
-/**
- * enum ethtool_test_flags - flags definition of ethtool_test
- * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
- *	only online tests.
- * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
- * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
- *	test.
- * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
- */
-
-enum ethtool_test_flags {
-	ETH_TEST_FL_OFFLINE	= (1 << 0),
-	ETH_TEST_FL_FAILED	= (1 << 1),
-	ETH_TEST_FL_EXTERNAL_LB	= (1 << 2),
-	ETH_TEST_FL_EXTERNAL_LB_DONE	= (1 << 3),
-};
-
-/* for requesting NIC test and getting results*/
-struct ethtool_test {
-	__u32	cmd;		/* ETHTOOL_TEST */
-	__u32	flags;		/* ETH_TEST_FL_xxx */
-	__u32	reserved;
-	__u32	len;		/* result length, in number of u64 elements */
-	__u64	data[0];
-};
-
-/* for dumping NIC-specific statistics */
-struct ethtool_stats {
-	__u32	cmd;		/* ETHTOOL_GSTATS */
-	__u32	n_stats;	/* number of u64's being returned */
-	__u64	data[0];
-};
-
-struct ethtool_perm_addr {
-	__u32	cmd;		/* ETHTOOL_GPERMADDR */
-	__u32	size;
-	__u8	data[0];
-};
-
-/* boolean flags controlling per-interface behavior characteristics.
- * When reading, the flag indicates whether or not a certain behavior
- * is enabled/present.  When writing, the flag indicates whether
- * or not the driver should turn on (set) or off (clear) a behavior.
- *
- * Some behaviors may read-only (unconditionally absent or present).
- * If such is the case, return EINVAL in the set-flags operation if the
- * flag differs from the read-only value.
- */
-enum ethtool_flags {
-	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
-	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
-	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
-	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
-	ETH_FLAG_RXHASH		= (1 << 28),
-};
+#include <uapi/linux/ethtool.h>
 
-/* The following structures are for supporting RX network flow
- * classification and RX n-tuple configuration. Note, all multibyte
- * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
- * be in network byte order.
- */
-
-/**
- * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @psrc: Source port
- * @pdst: Destination port
- * @tos: Type-of-service
- *
- * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
- */
-struct ethtool_tcpip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be16	psrc;
-	__be16	pdst;
-	__u8    tos;
-};
-
-/**
- * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @spi: Security parameters index
- * @tos: Type-of-service
- *
- * This can be used to specify an IPsec transport or tunnel over IPv4.
- */
-struct ethtool_ah_espip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be32	spi;
-	__u8    tos;
-};
-
-#define	ETH_RX_NFC_IP4	1
-
-/**
- * struct ethtool_usrip4_spec - general flow specification for IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @l4_4_bytes: First 4 bytes of transport (layer 4) header
- * @tos: Type-of-service
- * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
- * @proto: Transport protocol number; mask must be 0
- */
-struct ethtool_usrip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be32	l4_4_bytes;
-	__u8    tos;
-	__u8    ip_ver;
-	__u8    proto;
-};
-
-union ethtool_flow_union {
-	struct ethtool_tcpip4_spec		tcp_ip4_spec;
-	struct ethtool_tcpip4_spec		udp_ip4_spec;
-	struct ethtool_tcpip4_spec		sctp_ip4_spec;
-	struct ethtool_ah_espip4_spec		ah_ip4_spec;
-	struct ethtool_ah_espip4_spec		esp_ip4_spec;
-	struct ethtool_usrip4_spec		usr_ip4_spec;
-	struct ethhdr				ether_spec;
-	__u8					hdata[60];
-};
-
-struct ethtool_flow_ext {
-	__be16	vlan_etype;
-	__be16	vlan_tci;
-	__be32	data[2];
-};
-
-/**
- * struct ethtool_rx_flow_spec - classification rule for RX flows
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow fields to match (dependent on @flow_type)
- * @h_ext: Additional fields to match
- * @m_u: Masks for flow field bits to be matched
- * @m_ext: Masks for additional field bits to be matched
- *	Note, all additional fields must be ignored unless @flow_type
- *	includes the %FLOW_EXT flag.
- * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
- *	if packets should be discarded
- * @location: Location of rule in the table.  Locations must be
- *	numbered such that a flow matching multiple rules will be
- *	classified according to the first (lowest numbered) rule.
- */
-struct ethtool_rx_flow_spec {
-	__u32		flow_type;
-	union ethtool_flow_union h_u;
-	struct ethtool_flow_ext h_ext;
-	union ethtool_flow_union m_u;
-	struct ethtool_flow_ext m_ext;
-	__u64		ring_cookie;
-	__u32		location;
-};
-
-/**
- * struct ethtool_rxnfc - command to get or set RX flow classification rules
- * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
- *	%ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
- *	%ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
- * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
- * @data: Command-dependent value
- * @fs: Flow classification rule
- * @rule_cnt: Number of rules to be affected
- * @rule_locs: Array of used rule locations
- *
- * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
- * the fields included in the flow hash, e.g. %RXH_IP_SRC.  The following
- * structure fields must not be used.
- *
- * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
- * on return.
- *
- * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
- * rules on return.  If @data is non-zero on return then it is the
- * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
- * driver supports any special location values.  If that flag is not
- * set in @data then special location values should not be used.
- *
- * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
- * existing rule on entry and @fs contains the rule on return.
- *
- * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
- * user buffer for @rule_locs on entry.  On return, @data is the size
- * of the rule table, @rule_cnt is the number of defined rules, and
- * @rule_locs contains the locations of the defined rules.  Drivers
- * must use the second parameter to get_rxnfc() instead of @rule_locs.
- *
- * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
- * @fs.@location either specifies the location to use or is a special
- * location value with %RX_CLS_LOC_SPECIAL flag set.  On return,
- * @fs.@location is the actual rule location.
- *
- * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
- * existing rule on entry.
- *
- * A driver supporting the special location values for
- * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
- * location, and may remove a rule at a later location (lower
- * priority) that matches exactly the same set of flows.  The special
- * values are: %RX_CLS_LOC_ANY, selecting any location;
- * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
- * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
- * location (minimum priority).  Additional special values may be
- * defined in future and drivers must return -%EINVAL for any
- * unrecognised value.
- */
-struct ethtool_rxnfc {
-	__u32				cmd;
-	__u32				flow_type;
-	__u64				data;
-	struct ethtool_rx_flow_spec	fs;
-	__u32				rule_cnt;
-	__u32				rule_locs[0];
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 
 struct compat_ethtool_rx_flow_spec {
@@ -621,223 +37,6 @@ struct compat_ethtool_rxnfc {
 };
 
 #endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
-
-/**
- * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
- * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
- * @size: On entry, the array size of the user buffer, which may be zero.
- *	On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
- *	indirection table.
- * @ring_index: RX ring/queue index for each hash value
- *
- * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
- * should be returned.  For %ETHTOOL_SRXFHINDIR, a @size of zero means
- * the table should be reset to default values.  This last feature
- * is not supported by the original implementations.
- */
-struct ethtool_rxfh_indir {
-	__u32	cmd;
-	__u32	size;
-	__u32	ring_index[0];
-};
-
-/**
- * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow field values to match (dependent on @flow_type)
- * @m_u: Masks for flow field value bits to be ignored
- * @vlan_tag: VLAN tag to match
- * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
- * @data: Driver-dependent data to match
- * @data_mask: Mask for driver-dependent data bits to be ignored
- * @action: RX ring/queue index to deliver to (non-negative) or other action
- *	(negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
- *
- * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
- * a field value and mask are both zero this is treated as if all mask
- * bits are set i.e. the field is ignored.
- */
-struct ethtool_rx_ntuple_flow_spec {
-	__u32		 flow_type;
-	union {
-		struct ethtool_tcpip4_spec		tcp_ip4_spec;
-		struct ethtool_tcpip4_spec		udp_ip4_spec;
-		struct ethtool_tcpip4_spec		sctp_ip4_spec;
-		struct ethtool_ah_espip4_spec		ah_ip4_spec;
-		struct ethtool_ah_espip4_spec		esp_ip4_spec;
-		struct ethtool_usrip4_spec		usr_ip4_spec;
-		struct ethhdr				ether_spec;
-		__u8					hdata[72];
-	} h_u, m_u;
-
-	__u16	        vlan_tag;
-	__u16	        vlan_tag_mask;
-	__u64		data;
-	__u64		data_mask;
-
-	__s32		action;
-#define ETHTOOL_RXNTUPLE_ACTION_DROP	(-1)	/* drop packet */
-#define ETHTOOL_RXNTUPLE_ACTION_CLEAR	(-2)	/* clear filter */
-};
-
-/**
- * struct ethtool_rx_ntuple - command to set or clear RX flow filter
- * @cmd: Command number - %ETHTOOL_SRXNTUPLE
- * @fs: Flow filter specification
- */
-struct ethtool_rx_ntuple {
-	__u32					cmd;
-	struct ethtool_rx_ntuple_flow_spec	fs;
-};
-
-#define ETHTOOL_FLASH_MAX_FILENAME	128
-enum ethtool_flash_op_type {
-	ETHTOOL_FLASH_ALL_REGIONS	= 0,
-};
-
-/* for passing firmware flashing related parameters */
-struct ethtool_flash {
-	__u32	cmd;
-	__u32	region;
-	char	data[ETHTOOL_FLASH_MAX_FILENAME];
-};
-
-/**
- * struct ethtool_dump - used for retrieving, setting device dump
- * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
- * 	%ETHTOOL_SET_DUMP
- * @version: FW version of the dump, filled in by driver
- * @flag: driver dependent flag for dump setting, filled in by driver during
- *        get and filled in by ethtool for set operation.
- *        flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
- *        firmware dump is disabled.
- * @len: length of dump data, used as the length of the user buffer on entry to
- * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
- * 	 for %ETHTOOL_GET_DUMP_FLAG command
- * @data: data collected for get dump data operation
- */
-
-#define ETH_FW_DUMP_DISABLE 0
-
-struct ethtool_dump {
-	__u32	cmd;
-	__u32	version;
-	__u32	flag;
-	__u32	len;
-	__u8	data[0];
-};
-
-/* for returning and changing feature sets */
-
-/**
- * struct ethtool_get_features_block - block with state of 32 features
- * @available: mask of changeable features
- * @requested: mask of features requested to be enabled if possible
- * @active: mask of currently enabled features
- * @never_changed: mask of features not changeable for any device
- */
-struct ethtool_get_features_block {
-	__u32	available;
-	__u32	requested;
-	__u32	active;
-	__u32	never_changed;
-};
-
-/**
- * struct ethtool_gfeatures - command to get state of device's features
- * @cmd: command number = %ETHTOOL_GFEATURES
- * @size: in: number of elements in the features[] array;
- *       out: number of elements in features[] needed to hold all features
- * @features: state of features
- */
-struct ethtool_gfeatures {
-	__u32	cmd;
-	__u32	size;
-	struct ethtool_get_features_block features[0];
-};
-
-/**
- * struct ethtool_set_features_block - block with request for 32 features
- * @valid: mask of features to be changed
- * @requested: values of features to be changed
- */
-struct ethtool_set_features_block {
-	__u32	valid;
-	__u32	requested;
-};
-
-/**
- * struct ethtool_sfeatures - command to request change in device's features
- * @cmd: command number = %ETHTOOL_SFEATURES
- * @size: array size of the features[] array
- * @features: feature change masks
- */
-struct ethtool_sfeatures {
-	__u32	cmd;
-	__u32	size;
-	struct ethtool_set_features_block features[0];
-};
-
-/**
- * struct ethtool_ts_info - holds a device's timestamping and PHC association
- * @cmd: command number = %ETHTOOL_GET_TS_INFO
- * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
- * @phc_index: device index of the associated PHC, or -1 if there is none
- * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
- * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
- *
- * The bits in the 'tx_types' and 'rx_filters' fields correspond to
- * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
- * respectively.  For example, if the device supports HWTSTAMP_TX_ON,
- * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
- */
-struct ethtool_ts_info {
-	__u32	cmd;
-	__u32	so_timestamping;
-	__s32	phc_index;
-	__u32	tx_types;
-	__u32	tx_reserved[3];
-	__u32	rx_filters;
-	__u32	rx_reserved[3];
-};
-
-/*
- * %ETHTOOL_SFEATURES changes features present in features[].valid to the
- * values of corresponding bits in features[].requested. Bits in .requested
- * not set in .valid or not changeable are ignored.
- *
- * Returns %EINVAL when .valid contains undefined or never-changeable bits
- * or size is not equal to required number of features words (32-bit blocks).
- * Returns >= 0 if request was completed; bits set in the value mean:
- *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
- *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
- *	those bits were ignored.
- *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
- *      resulting state of bits masked by .valid is not equal to .requested.
- *      Probably there are other device-specific constraints on some features
- *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
- *      here as though ignored bits were cleared.
- *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
- *      compatibility functions. Requested offload state cannot be properly
- *      managed by kernel.
- *
- * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
- * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
- * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
- * significant bit in features[0] fields. Empty strings mark undefined features.
- */
-enum ethtool_sfeatures_retval_bits {
-	ETHTOOL_F_UNSUPPORTED__BIT,
-	ETHTOOL_F_WISH__BIT,
-	ETHTOOL_F_COMPAT__BIT,
-};
-
-#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
-#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
-#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
-
-#ifdef __KERNEL__
 
 #include <linux/rculist.h>
 
@@ -1049,277 +248,4 @@ struct ethtool_ops {
 
 
 };
-#endif /* __KERNEL__ */
-
-/* CMDs currently supported */
-#define ETHTOOL_GSET		0x00000001 /* Get settings. */
-#define ETHTOOL_SSET		0x00000002 /* Set settings. */
-#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
-#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
-#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
-#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
-#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
-#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
-#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
-/* Get link status for host, i.e. whether the interface *and* the
- * physical port (if there is one) are up (ethtool_value). */
-#define ETHTOOL_GLINK		0x0000000a
-#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
-#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
-#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
-#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
-#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
-#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
-#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
-#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
-#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
-#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
-#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
-#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
-#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
-					    * (ethtool_value) */
-#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
-					    * (ethtool_value). */
-#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
-#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
-#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
-#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
-#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
-#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
-#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
-#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
-#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
-#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
-#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
-#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
-#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
-#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
-#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
-
-#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
-#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
-#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
-#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
-#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
-#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
-#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
-#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
-#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
-#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
-#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
-#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
-#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE	0x00000036 /* deprecated */
-#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
-#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
-#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
-
-#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
-#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
-#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
-#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
-#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
-#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
-#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
-#define ETHTOOL_GET_TS_INFO	0x00000041 /* Get time stamping and PHC info */
-#define ETHTOOL_GMODULEINFO	0x00000042 /* Get plug-in module information */
-#define ETHTOOL_GMODULEEEPROM	0x00000043 /* Get plug-in module eeprom */
-#define ETHTOOL_GEEE		0x00000044 /* Get EEE settings */
-#define ETHTOOL_SEEE		0x00000045 /* Set EEE settings */
-
-/* compatibility with older code */
-#define SPARC_ETH_GSET		ETHTOOL_GSET
-#define SPARC_ETH_SSET		ETHTOOL_SSET
-
-/* Indicates what features are supported by the interface. */
-#define SUPPORTED_10baseT_Half		(1 << 0)
-#define SUPPORTED_10baseT_Full		(1 << 1)
-#define SUPPORTED_100baseT_Half		(1 << 2)
-#define SUPPORTED_100baseT_Full		(1 << 3)
-#define SUPPORTED_1000baseT_Half	(1 << 4)
-#define SUPPORTED_1000baseT_Full	(1 << 5)
-#define SUPPORTED_Autoneg		(1 << 6)
-#define SUPPORTED_TP			(1 << 7)
-#define SUPPORTED_AUI			(1 << 8)
-#define SUPPORTED_MII			(1 << 9)
-#define SUPPORTED_FIBRE			(1 << 10)
-#define SUPPORTED_BNC			(1 << 11)
-#define SUPPORTED_10000baseT_Full	(1 << 12)
-#define SUPPORTED_Pause			(1 << 13)
-#define SUPPORTED_Asym_Pause		(1 << 14)
-#define SUPPORTED_2500baseX_Full	(1 << 15)
-#define SUPPORTED_Backplane		(1 << 16)
-#define SUPPORTED_1000baseKX_Full	(1 << 17)
-#define SUPPORTED_10000baseKX4_Full	(1 << 18)
-#define SUPPORTED_10000baseKR_Full	(1 << 19)
-#define SUPPORTED_10000baseR_FEC	(1 << 20)
-#define SUPPORTED_20000baseMLD2_Full	(1 << 21)
-#define SUPPORTED_20000baseKR2_Full	(1 << 22)
-#define SUPPORTED_40000baseKR4_Full	(1 << 23)
-#define SUPPORTED_40000baseCR4_Full	(1 << 24)
-#define SUPPORTED_40000baseSR4_Full	(1 << 25)
-#define SUPPORTED_40000baseLR4_Full	(1 << 26)
-
-/* Indicates what features are advertised by the interface. */
-#define ADVERTISED_10baseT_Half		(1 << 0)
-#define ADVERTISED_10baseT_Full		(1 << 1)
-#define ADVERTISED_100baseT_Half	(1 << 2)
-#define ADVERTISED_100baseT_Full	(1 << 3)
-#define ADVERTISED_1000baseT_Half	(1 << 4)
-#define ADVERTISED_1000baseT_Full	(1 << 5)
-#define ADVERTISED_Autoneg		(1 << 6)
-#define ADVERTISED_TP			(1 << 7)
-#define ADVERTISED_AUI			(1 << 8)
-#define ADVERTISED_MII			(1 << 9)
-#define ADVERTISED_FIBRE		(1 << 10)
-#define ADVERTISED_BNC			(1 << 11)
-#define ADVERTISED_10000baseT_Full	(1 << 12)
-#define ADVERTISED_Pause		(1 << 13)
-#define ADVERTISED_Asym_Pause		(1 << 14)
-#define ADVERTISED_2500baseX_Full	(1 << 15)
-#define ADVERTISED_Backplane		(1 << 16)
-#define ADVERTISED_1000baseKX_Full	(1 << 17)
-#define ADVERTISED_10000baseKX4_Full	(1 << 18)
-#define ADVERTISED_10000baseKR_Full	(1 << 19)
-#define ADVERTISED_10000baseR_FEC	(1 << 20)
-#define ADVERTISED_20000baseMLD2_Full	(1 << 21)
-#define ADVERTISED_20000baseKR2_Full	(1 << 22)
-#define ADVERTISED_40000baseKR4_Full	(1 << 23)
-#define ADVERTISED_40000baseCR4_Full	(1 << 24)
-#define ADVERTISED_40000baseSR4_Full	(1 << 25)
-#define ADVERTISED_40000baseLR4_Full	(1 << 26)
-
-/* The following are all involved in forcing a particular link
- * mode for the device for setting things.  When getting the
- * devices settings, these indicate the current mode and whether
- * it was forced up into this mode or autonegotiated.
- */
-
-/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
-#define SPEED_10		10
-#define SPEED_100		100
-#define SPEED_1000		1000
-#define SPEED_2500		2500
-#define SPEED_10000		10000
-#define SPEED_UNKNOWN		-1
-
-/* Duplex, half or full. */
-#define DUPLEX_HALF		0x00
-#define DUPLEX_FULL		0x01
-#define DUPLEX_UNKNOWN		0xff
-
-/* Which connector port. */
-#define PORT_TP			0x00
-#define PORT_AUI		0x01
-#define PORT_MII		0x02
-#define PORT_FIBRE		0x03
-#define PORT_BNC		0x04
-#define PORT_DA			0x05
-#define PORT_NONE		0xef
-#define PORT_OTHER		0xff
-
-/* Which transceiver to use. */
-#define XCVR_INTERNAL		0x00
-#define XCVR_EXTERNAL		0x01
-#define XCVR_DUMMY1		0x02
-#define XCVR_DUMMY2		0x03
-#define XCVR_DUMMY3		0x04
-
-/* Enable or disable autonegotiation.  If this is set to enable,
- * the forced link modes above are completely ignored.
- */
-#define AUTONEG_DISABLE		0x00
-#define AUTONEG_ENABLE		0x01
-
-/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
- * the driver is required to renegotiate link
- */
-#define ETH_TP_MDI_INVALID	0x00 /* status: unknown; control: unsupported */
-#define ETH_TP_MDI		0x01 /* status: MDI;     control: force MDI */
-#define ETH_TP_MDI_X		0x02 /* status: MDI-X;   control: force MDI-X */
-#define ETH_TP_MDI_AUTO		0x03 /*                  control: auto-select */
-
-/* Wake-On-Lan options. */
-#define WAKE_PHY		(1 << 0)
-#define WAKE_UCAST		(1 << 1)
-#define WAKE_MCAST		(1 << 2)
-#define WAKE_BCAST		(1 << 3)
-#define WAKE_ARP		(1 << 4)
-#define WAKE_MAGIC		(1 << 5)
-#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
-
-/* L2-L4 network traffic flow types */
-#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
-#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
-#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
-#define	AH_ESP_V4_FLOW	0x04	/* hash only */
-#define	TCP_V6_FLOW	0x05	/* hash only */
-#define	UDP_V6_FLOW	0x06	/* hash only */
-#define	SCTP_V6_FLOW	0x07	/* hash only */
-#define	AH_ESP_V6_FLOW	0x08	/* hash only */
-#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
-#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
-#define	AH_V6_FLOW	0x0b	/* hash only */
-#define	ESP_V6_FLOW	0x0c	/* hash only */
-#define	IP_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
-#define	IPV4_FLOW	0x10	/* hash only */
-#define	IPV6_FLOW	0x11	/* hash only */
-#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
-/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
-#define	FLOW_EXT	0x80000000
-
-/* L3-L4 network traffic flow hash options */
-#define	RXH_L2DA	(1 << 1)
-#define	RXH_VLAN	(1 << 2)
-#define	RXH_L3_PROTO	(1 << 3)
-#define	RXH_IP_SRC	(1 << 4)
-#define	RXH_IP_DST	(1 << 5)
-#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
-#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
-#define	RXH_DISCARD	(1 << 31)
-
-#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
-
-/* Special RX classification rule insert location values */
-#define RX_CLS_LOC_SPECIAL	0x80000000	/* flag */
-#define RX_CLS_LOC_ANY		0xffffffff
-#define RX_CLS_LOC_FIRST	0xfffffffe
-#define RX_CLS_LOC_LAST		0xfffffffd
-
-/* EEPROM Standards for plug in modules */
-#define ETH_MODULE_SFF_8079		0x1
-#define ETH_MODULE_SFF_8079_LEN		256
-#define ETH_MODULE_SFF_8472		0x2
-#define ETH_MODULE_SFF_8472_LEN		512
-
-/* Reset flags */
-/* The reset() operation must clear the flags for the components which
- * were actually reset.  On successful return, the flags indicate the
- * components which were not reset, either because they do not exist
- * in the hardware or because they cannot be reset independently.  The
- * driver must never reset any components that were not requested.
- */
-enum ethtool_reset_flags {
-	/* These flags represent components dedicated to the interface
-	 * the command is addressed to.  Shift any flag left by
-	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
-	 * same type.
-	 */
-	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
-	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
-	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
-	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
-	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
-	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
-	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
-	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
-						 * multiple components */
-
-	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
-						 * this interface */
-	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
-						 * interface, even if shared */
-};
-#define ETH_RESET_SHARED_SHIFT	16
-
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index 41085d0f3955..6daf6d4971f6 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -10,59 +10,11 @@
  *  Davide Libenzi <davidel@xmailserver.org>
  *
  */
-
 #ifndef _LINUX_EVENTPOLL_H
 #define _LINUX_EVENTPOLL_H
 
-/* For O_CLOEXEC */
-#include <linux/fcntl.h>
-#include <linux/types.h>
-
-/* Flags for epoll_create1.  */
-#define EPOLL_CLOEXEC O_CLOEXEC
-
-/* Valid opcodes to issue to sys_epoll_ctl() */
-#define EPOLL_CTL_ADD 1
-#define EPOLL_CTL_DEL 2
-#define EPOLL_CTL_MOD 3
-#define EPOLL_CTL_DISABLE 4
-
-/*
- * Request the handling of system wakeup events so as to prevent system suspends
- * from happening while those events are being processed.
- *
- * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
- * re-allowed until epoll_wait is called again after consuming the wakeup
- * event(s).
- *
- * Requires CAP_BLOCK_SUSPEND
- */
-#define EPOLLWAKEUP (1 << 29)
-
-/* Set the One Shot behaviour for the target file descriptor */
-#define EPOLLONESHOT (1 << 30)
+#include <uapi/linux/eventpoll.h>
 
-/* Set the Edge Triggered behaviour for the target file descriptor */
-#define EPOLLET (1 << 31)
-
-/* 
- * On x86-64 make the 64bit structure have the same alignment as the
- * 32bit structure. This makes 32bit emulation easier.
- *
- * UML/x86_64 needs the same packing as x86_64
- */
-#ifdef __x86_64__
-#define EPOLL_PACKED __attribute__((packed))
-#else
-#define EPOLL_PACKED
-#endif
-
-struct epoll_event {
-	__u32 events;
-	__u64 data;
-} EPOLL_PACKED;
-
-#ifdef __KERNEL__
 
 /* Forward declarations to avoid compiler errors */
 struct file;
@@ -116,7 +68,4 @@ static inline void eventpoll_release(struct file *file) {}
 
 #endif
 
-#endif /* #ifdef __KERNEL__ */
-
 #endif /* #ifndef _LINUX_EVENTPOLL_H */
-
diff --git a/include/linux/fadvise.h b/include/linux/fadvise.h
deleted file mode 100644
index e8e747139b9a..000000000000
--- a/include/linux/fadvise.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef FADVISE_H_INCLUDED
-#define FADVISE_H_INCLUDED
-
-#define POSIX_FADV_NORMAL	0 /* No further special treatment.  */
-#define POSIX_FADV_RANDOM	1 /* Expect random page references.  */
-#define POSIX_FADV_SEQUENTIAL	2 /* Expect sequential page references.  */
-#define POSIX_FADV_WILLNEED	3 /* Will need these pages.  */
-
-/*
- * The advise values for POSIX_FADV_DONTNEED and POSIX_ADV_NOREUSE
- * for s390-64 differ from the values for the rest of the world.
- */
-#if defined(__s390x__)
-#define POSIX_FADV_DONTNEED	6 /* Don't need these pages.  */
-#define POSIX_FADV_NOREUSE	7 /* Data will be accessed once.  */
-#else
-#define POSIX_FADV_DONTNEED	4 /* Don't need these pages.  */
-#define POSIX_FADV_NOREUSE	5 /* Data will be accessed once.  */
-#endif
-
-#endif	/* FADVISE_H_INCLUDED */
diff --git a/include/linux/falloc.h b/include/linux/falloc.h
index d39b824a780c..31591686ac2d 100644
--- a/include/linux/falloc.h
+++ b/include/linux/falloc.h
@@ -1,11 +1,8 @@
 #ifndef _FALLOC_H_
 #define _FALLOC_H_
 
-#define FALLOC_FL_KEEP_SIZE	0x01 /* default is extend size */
-#define FALLOC_FL_PUNCH_HOLE	0x02 /* de-allocates range */
-#define FALLOC_FL_NO_HIDE_STALE	0x04 /* reserved codepoint */
+#include <uapi/linux/falloc.h>
 
-#ifdef __KERNEL__
 
 /*
  * Space reservation ioctls and argument structure
@@ -24,6 +21,4 @@ struct space_resv {
 #define FS_IOC_RESVSP		_IOW('X', 40, struct space_resv)
 #define FS_IOC_RESVSP64		_IOW('X', 42, struct space_resv)
 
-#endif /* __KERNEL__ */
-
 #endif /* _FALLOC_H_ */
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 6c6133f76e16..cef93ddcc5a0 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -1,120 +1,8 @@
 #ifndef _LINUX_FANOTIFY_H
 #define _LINUX_FANOTIFY_H
 
-#include <linux/types.h>
+#include <uapi/linux/fanotify.h>
 
-/* the following events that user-space can register for */
-#define FAN_ACCESS		0x00000001	/* File was accessed */
-#define FAN_MODIFY		0x00000002	/* File was modified */
-#define FAN_CLOSE_WRITE		0x00000008	/* Writtable file closed */
-#define FAN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
-#define FAN_OPEN		0x00000020	/* File was opened */
-
-#define FAN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
-
-#define FAN_OPEN_PERM		0x00010000	/* File open in perm check */
-#define FAN_ACCESS_PERM		0x00020000	/* File accessed in perm check */
-
-#define FAN_ONDIR		0x40000000	/* event occurred against dir */
-
-#define FAN_EVENT_ON_CHILD	0x08000000	/* interested in child events */
-
-/* helper events */
-#define FAN_CLOSE		(FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
-
-/* flags used for fanotify_init() */
-#define FAN_CLOEXEC		0x00000001
-#define FAN_NONBLOCK		0x00000002
-
-/* These are NOT bitwise flags.  Both bits are used togther.  */
-#define FAN_CLASS_NOTIF		0x00000000
-#define FAN_CLASS_CONTENT	0x00000004
-#define FAN_CLASS_PRE_CONTENT	0x00000008
-#define FAN_ALL_CLASS_BITS	(FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \
-				 FAN_CLASS_PRE_CONTENT)
-
-#define FAN_UNLIMITED_QUEUE	0x00000010
-#define FAN_UNLIMITED_MARKS	0x00000020
-
-#define FAN_ALL_INIT_FLAGS	(FAN_CLOEXEC | FAN_NONBLOCK | \
-				 FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\
-				 FAN_UNLIMITED_MARKS)
-
-/* flags used for fanotify_modify_mark() */
-#define FAN_MARK_ADD		0x00000001
-#define FAN_MARK_REMOVE		0x00000002
-#define FAN_MARK_DONT_FOLLOW	0x00000004
-#define FAN_MARK_ONLYDIR	0x00000008
-#define FAN_MARK_MOUNT		0x00000010
-#define FAN_MARK_IGNORED_MASK	0x00000020
-#define FAN_MARK_IGNORED_SURV_MODIFY	0x00000040
-#define FAN_MARK_FLUSH		0x00000080
-#ifdef __KERNEL__
 /* not valid from userspace, only kernel internal */
 #define FAN_MARK_ONDIR		0x00000100
-#endif
-
-#define FAN_ALL_MARK_FLAGS	(FAN_MARK_ADD |\
-				 FAN_MARK_REMOVE |\
-				 FAN_MARK_DONT_FOLLOW |\
-				 FAN_MARK_ONLYDIR |\
-				 FAN_MARK_MOUNT |\
-				 FAN_MARK_IGNORED_MASK |\
-				 FAN_MARK_IGNORED_SURV_MODIFY |\
-				 FAN_MARK_FLUSH)
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility.  Apps will get only the
- * events that they originally wanted.  Be sure to add new events here!
- */
-#define FAN_ALL_EVENTS (FAN_ACCESS |\
-			FAN_MODIFY |\
-			FAN_CLOSE |\
-			FAN_OPEN)
-
-/*
- * All events which require a permission response from userspace
- */
-#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
-			     FAN_ACCESS_PERM)
-
-#define FAN_ALL_OUTGOING_EVENTS	(FAN_ALL_EVENTS |\
-				 FAN_ALL_PERM_EVENTS |\
-				 FAN_Q_OVERFLOW)
-
-#define FANOTIFY_METADATA_VERSION	3
-
-struct fanotify_event_metadata {
-	__u32 event_len;
-	__u8 vers;
-	__u8 reserved;
-	__u16 metadata_len;
-	__aligned_u64 mask;
-	__s32 fd;
-	__s32 pid;
-};
-
-struct fanotify_response {
-	__s32 fd;
-	__u32 response;
-};
-
-/* Legit userspace responses to a _PERM event */
-#define FAN_ALLOW	0x01
-#define FAN_DENY	0x02
-/* No fd set in event */
-#define FAN_NOFD	-1
-
-/* Helper functions to deal with fanotify_event_metadata buffers */
-#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
-
-#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
-				   (struct fanotify_event_metadata*)(((char *)(meta)) + \
-				   (meta)->event_len))
-
-#define FAN_EVENT_OK(meta, len)	((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
-				(long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
-				(long)(meta)->event_len <= (long)(len))
-
 #endif /* _LINUX_FANOTIFY_H */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index ac3f1c605843..c7a95714b1fe 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1,409 +1,10 @@
 #ifndef _LINUX_FB_H
 #define _LINUX_FB_H
 
-#include <linux/types.h>
-#include <linux/i2c.h>
-#ifdef __KERNEL__
 #include <linux/kgdb.h>
-#endif /* __KERNEL__ */
+#include <uapi/linux/fb.h>
 
-/* Definitions of frame buffers						*/
-
-#define FB_MAX			32	/* sufficient for now */
-
-/* ioctls
-   0x46 is 'F'								*/
-#define FBIOGET_VSCREENINFO	0x4600
-#define FBIOPUT_VSCREENINFO	0x4601
-#define FBIOGET_FSCREENINFO	0x4602
-#define FBIOGETCMAP		0x4604
-#define FBIOPUTCMAP		0x4605
-#define FBIOPAN_DISPLAY		0x4606
-#ifdef __KERNEL__
 #define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor_user)
-#else
-#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor)
-#endif
-/* 0x4607-0x460B are defined below */
-/* #define FBIOGET_MONITORSPEC	0x460C */
-/* #define FBIOPUT_MONITORSPEC	0x460D */
-/* #define FBIOSWITCH_MONIBIT	0x460E */
-#define FBIOGET_CON2FBMAP	0x460F
-#define FBIOPUT_CON2FBMAP	0x4610
-#define FBIOBLANK		0x4611		/* arg: 0 or vesa level + 1 */
-#define FBIOGET_VBLANK		_IOR('F', 0x12, struct fb_vblank)
-#define FBIO_ALLOC              0x4613
-#define FBIO_FREE               0x4614
-#define FBIOGET_GLYPH           0x4615
-#define FBIOGET_HWCINFO         0x4616
-#define FBIOPUT_MODEINFO        0x4617
-#define FBIOGET_DISPINFO        0x4618
-#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, __u32)
-
-#define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
-#define FB_TYPE_PLANES			1	/* Non interleaved planes */
-#define FB_TYPE_INTERLEAVED_PLANES	2	/* Interleaved planes	*/
-#define FB_TYPE_TEXT			3	/* Text/attributes	*/
-#define FB_TYPE_VGA_PLANES		4	/* EGA/VGA planes	*/
-#define FB_TYPE_FOURCC			5	/* Type identified by a V4L2 FOURCC */
-
-#define FB_AUX_TEXT_MDA		0	/* Monochrome text */
-#define FB_AUX_TEXT_CGA		1	/* CGA/EGA/VGA Color text */
-#define FB_AUX_TEXT_S3_MMIO	2	/* S3 MMIO fasttext */
-#define FB_AUX_TEXT_MGA_STEP16	3	/* MGA Millenium I: text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_MGA_STEP8	4	/* other MGAs:      text, attr,  6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_GROUP	8	/* 8-15: SVGA tileblit compatible modes */
-#define FB_AUX_TEXT_SVGA_MASK	7	/* lower three bits says step */
-#define FB_AUX_TEXT_SVGA_STEP2	8	/* SVGA text mode:  text, attr */
-#define FB_AUX_TEXT_SVGA_STEP4	9	/* SVGA text mode:  text, attr,  2 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP8	10	/* SVGA text mode:  text, attr,  6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP16	11	/* SVGA text mode:  text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_SVGA_LAST	15	/* reserved up to 15 */
-
-#define FB_AUX_VGA_PLANES_VGA4		0	/* 16 color planes (EGA/VGA) */
-#define FB_AUX_VGA_PLANES_CFB4		1	/* CFB4 in planes (VGA) */
-#define FB_AUX_VGA_PLANES_CFB8		2	/* CFB8 in planes (VGA) */
-
-#define FB_VISUAL_MONO01		0	/* Monochr. 1=Black 0=White */
-#define FB_VISUAL_MONO10		1	/* Monochr. 1=White 0=Black */
-#define FB_VISUAL_TRUECOLOR		2	/* True color	*/
-#define FB_VISUAL_PSEUDOCOLOR		3	/* Pseudo color (like atari) */
-#define FB_VISUAL_DIRECTCOLOR		4	/* Direct color */
-#define FB_VISUAL_STATIC_PSEUDOCOLOR	5	/* Pseudo color readonly */
-#define FB_VISUAL_FOURCC		6	/* Visual identified by a V4L2 FOURCC */
-
-#define FB_ACCEL_NONE		0	/* no hardware accelerator	*/
-#define FB_ACCEL_ATARIBLITT	1	/* Atari Blitter		*/
-#define FB_ACCEL_AMIGABLITT	2	/* Amiga Blitter                */
-#define FB_ACCEL_S3_TRIO64	3	/* Cybervision64 (S3 Trio64)    */
-#define FB_ACCEL_NCR_77C32BLT	4	/* RetinaZ3 (NCR 77C32BLT)      */
-#define FB_ACCEL_S3_VIRGE	5	/* Cybervision64/3D (S3 ViRGE)	*/
-#define FB_ACCEL_ATI_MACH64GX	6	/* ATI Mach 64GX family		*/
-#define FB_ACCEL_DEC_TGA	7	/* DEC 21030 TGA		*/
-#define FB_ACCEL_ATI_MACH64CT	8	/* ATI Mach 64CT family		*/
-#define FB_ACCEL_ATI_MACH64VT	9	/* ATI Mach 64CT family VT class */
-#define FB_ACCEL_ATI_MACH64GT	10	/* ATI Mach 64CT family GT class */
-#define FB_ACCEL_SUN_CREATOR	11	/* Sun Creator/Creator3D	*/
-#define FB_ACCEL_SUN_CGSIX	12	/* Sun cg6			*/
-#define FB_ACCEL_SUN_LEO	13	/* Sun leo/zx			*/
-#define FB_ACCEL_IMS_TWINTURBO	14	/* IMS Twin Turbo		*/
-#define FB_ACCEL_3DLABS_PERMEDIA2 15	/* 3Dlabs Permedia 2		*/
-#define FB_ACCEL_MATROX_MGA2064W 16	/* Matrox MGA2064W (Millenium)	*/
-#define FB_ACCEL_MATROX_MGA1064SG 17	/* Matrox MGA1064SG (Mystique)	*/
-#define FB_ACCEL_MATROX_MGA2164W 18	/* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGA2164W_AGP 19	/* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGAG100	20	/* Matrox G100 (Productiva G100) */
-#define FB_ACCEL_MATROX_MGAG200	21	/* Matrox G200 (Myst, Mill, ...) */
-#define FB_ACCEL_SUN_CG14	22	/* Sun cgfourteen		 */
-#define FB_ACCEL_SUN_BWTWO	23	/* Sun bwtwo			*/
-#define FB_ACCEL_SUN_CGTHREE	24	/* Sun cgthree			*/
-#define FB_ACCEL_SUN_TCX	25	/* Sun tcx			*/
-#define FB_ACCEL_MATROX_MGAG400	26	/* Matrox G400			*/
-#define FB_ACCEL_NV3		27	/* nVidia RIVA 128              */
-#define FB_ACCEL_NV4		28	/* nVidia RIVA TNT		*/
-#define FB_ACCEL_NV5		29	/* nVidia RIVA TNT2		*/
-#define FB_ACCEL_CT_6555x	30	/* C&T 6555x			*/
-#define FB_ACCEL_3DFX_BANSHEE	31	/* 3Dfx Banshee			*/
-#define FB_ACCEL_ATI_RAGE128	32	/* ATI Rage128 family		*/
-#define FB_ACCEL_IGS_CYBER2000	33	/* CyberPro 2000		*/
-#define FB_ACCEL_IGS_CYBER2010	34	/* CyberPro 2010		*/
-#define FB_ACCEL_IGS_CYBER5000	35	/* CyberPro 5000		*/
-#define FB_ACCEL_SIS_GLAMOUR    36	/* SiS 300/630/540              */
-#define FB_ACCEL_3DLABS_PERMEDIA3 37	/* 3Dlabs Permedia 3		*/
-#define FB_ACCEL_ATI_RADEON	38	/* ATI Radeon family		*/
-#define FB_ACCEL_I810           39      /* Intel 810/815                */
-#define FB_ACCEL_SIS_GLAMOUR_2  40	/* SiS 315, 650, 740		*/
-#define FB_ACCEL_SIS_XABRE      41	/* SiS 330 ("Xabre")		*/
-#define FB_ACCEL_I830           42      /* Intel 830M/845G/85x/865G     */
-#define FB_ACCEL_NV_10          43      /* nVidia Arch 10               */
-#define FB_ACCEL_NV_20          44      /* nVidia Arch 20               */
-#define FB_ACCEL_NV_30          45      /* nVidia Arch 30               */
-#define FB_ACCEL_NV_40          46      /* nVidia Arch 40               */
-#define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
-#define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
-#define FB_ACCEL_OMAP1610	49	/* TI OMAP16xx                  */
-#define FB_ACCEL_TRIDENT_TGUI	50	/* Trident TGUI			*/
-#define FB_ACCEL_TRIDENT_3DIMAGE 51	/* Trident 3DImage		*/
-#define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
-#define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
-#define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
-#define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
-#define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
-#define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
-#define FB_ACCEL_NEOMAGIC_NM2097 93	/* NeoMagic NM2097              */
-#define FB_ACCEL_NEOMAGIC_NM2160 94	/* NeoMagic NM2160              */
-#define FB_ACCEL_NEOMAGIC_NM2200 95	/* NeoMagic NM2200              */
-#define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
-#define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
-#define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
-#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
-
-#define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
-#define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
-#define FB_ACCEL_SAVAGE3D_MV    0x82	/* S3 Savage3D-MV               */
-#define FB_ACCEL_SAVAGE2000     0x83	/* S3 Savage2000                */
-#define FB_ACCEL_SAVAGE_MX_MV   0x84	/* S3 Savage/MX-MV              */
-#define FB_ACCEL_SAVAGE_MX      0x85	/* S3 Savage/MX                 */
-#define FB_ACCEL_SAVAGE_IX_MV   0x86	/* S3 Savage/IX-MV              */
-#define FB_ACCEL_SAVAGE_IX      0x87	/* S3 Savage/IX                 */
-#define FB_ACCEL_PROSAVAGE_PM   0x88	/* S3 ProSavage PM133           */
-#define FB_ACCEL_PROSAVAGE_KM   0x89	/* S3 ProSavage KM133           */
-#define FB_ACCEL_S3TWISTER_P    0x8a	/* S3 Twister                   */
-#define FB_ACCEL_S3TWISTER_K    0x8b	/* S3 TwisterK                  */
-#define FB_ACCEL_SUPERSAVAGE    0x8c    /* S3 Supersavage               */
-#define FB_ACCEL_PROSAVAGE_DDR  0x8d	/* S3 ProSavage DDR             */
-#define FB_ACCEL_PROSAVAGE_DDRK 0x8e	/* S3 ProSavage DDR-K           */
-
-#define FB_ACCEL_PUV3_UNIGFX	0xa0	/* PKUnity-v3 Unigfx		*/
-
-#define FB_CAP_FOURCC		1	/* Device supports FOURCC-based formats */
-
-struct fb_fix_screeninfo {
-	char id[16];			/* identification string eg "TT Builtin" */
-	unsigned long smem_start;	/* Start of frame buffer mem */
-					/* (physical address) */
-	__u32 smem_len;			/* Length of frame buffer mem */
-	__u32 type;			/* see FB_TYPE_*		*/
-	__u32 type_aux;			/* Interleave for interleaved Planes */
-	__u32 visual;			/* see FB_VISUAL_*		*/ 
-	__u16 xpanstep;			/* zero if no hardware panning  */
-	__u16 ypanstep;			/* zero if no hardware panning  */
-	__u16 ywrapstep;		/* zero if no hardware ywrap    */
-	__u32 line_length;		/* length of a line in bytes    */
-	unsigned long mmio_start;	/* Start of Memory Mapped I/O   */
-					/* (physical address) */
-	__u32 mmio_len;			/* Length of Memory Mapped I/O  */
-	__u32 accel;			/* Indicate to driver which	*/
-					/*  specific chip/card we have	*/
-	__u16 capabilities;		/* see FB_CAP_*			*/
-	__u16 reserved[2];		/* Reserved for future compatibility */
-};
-
-/* Interpretation of offset for color fields: All offsets are from the right,
- * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
- * can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified.
- *
- * For pseudocolor: offset and length should be the same for all color
- * components. Offset specifies the position of the least significant bit
- * of the pallette index in a pixel value. Length indicates the number
- * of available palette entries (i.e. # of entries = 1 << length).
- */
-struct fb_bitfield {
-	__u32 offset;			/* beginning of bitfield	*/
-	__u32 length;			/* length of bitfield		*/
-	__u32 msb_right;		/* != 0 : Most significant bit is */ 
-					/* right */ 
-};
-
-#define FB_NONSTD_HAM		1	/* Hold-And-Modify (HAM)        */
-#define FB_NONSTD_REV_PIX_IN_B	2	/* order of pixels in each byte is reversed */
-
-#define FB_ACTIVATE_NOW		0	/* set values immediately (or vbl)*/
-#define FB_ACTIVATE_NXTOPEN	1	/* activate on next open	*/
-#define FB_ACTIVATE_TEST	2	/* don't set, round up impossible */
-#define FB_ACTIVATE_MASK       15
-					/* values			*/
-#define FB_ACTIVATE_VBL	       16	/* activate values on next vbl  */
-#define FB_CHANGE_CMAP_VBL     32	/* change colormap on vbl	*/
-#define FB_ACTIVATE_ALL	       64	/* change all VCs on this fb	*/
-#define FB_ACTIVATE_FORCE     128	/* force apply even when no change*/
-#define FB_ACTIVATE_INV_MODE  256       /* invalidate videomode */
-
-#define FB_ACCELF_TEXT		1	/* (OBSOLETE) see fb_info.flags and vc_mode */
-
-#define FB_SYNC_HOR_HIGH_ACT	1	/* horizontal sync high active	*/
-#define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
-#define FB_SYNC_EXT		4	/* external sync		*/
-#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
-#define FB_SYNC_BROADCAST	16	/* broadcast video timings      */
-					/* vtotal = 144d/288n/576i => PAL  */
-					/* vtotal = 121d/242n/484i => NTSC */
-#define FB_SYNC_ON_GREEN	32	/* sync on green */
-
-#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
-#define FB_VMODE_INTERLACED	1	/* interlaced	*/
-#define FB_VMODE_DOUBLE		2	/* double scan */
-#define FB_VMODE_ODD_FLD_FIRST	4	/* interlaced: top line first */
-#define FB_VMODE_MASK		255
-
-#define FB_VMODE_YWRAP		256	/* ywrap instead of panning     */
-#define FB_VMODE_SMOOTH_XPAN	512	/* smooth xpan possible (internally used) */
-#define FB_VMODE_CONUPDATE	512	/* don't update x/yoffset	*/
-
-/*
- * Display rotation support
- */
-#define FB_ROTATE_UR      0
-#define FB_ROTATE_CW      1
-#define FB_ROTATE_UD      2
-#define FB_ROTATE_CCW     3
-
-#define PICOS2KHZ(a) (1000000000UL/(a))
-#define KHZ2PICOS(a) (1000000000UL/(a))
-
-struct fb_var_screeninfo {
-	__u32 xres;			/* visible resolution		*/
-	__u32 yres;
-	__u32 xres_virtual;		/* virtual resolution		*/
-	__u32 yres_virtual;
-	__u32 xoffset;			/* offset from virtual to visible */
-	__u32 yoffset;			/* resolution			*/
-
-	__u32 bits_per_pixel;		/* guess what			*/
-	__u32 grayscale;		/* 0 = color, 1 = grayscale,	*/
-					/* >1 = FOURCC			*/
-	struct fb_bitfield red;		/* bitfield in fb mem if true color, */
-	struct fb_bitfield green;	/* else only length is significant */
-	struct fb_bitfield blue;
-	struct fb_bitfield transp;	/* transparency			*/	
-
-	__u32 nonstd;			/* != 0 Non standard pixel format */
-
-	__u32 activate;			/* see FB_ACTIVATE_*		*/
-
-	__u32 height;			/* height of picture in mm    */
-	__u32 width;			/* width of picture in mm     */
-
-	__u32 accel_flags;		/* (OBSOLETE) see fb_info.flags */
-
-	/* Timing: All values in pixclocks, except pixclock (of course) */
-	__u32 pixclock;			/* pixel clock in ps (pico seconds) */
-	__u32 left_margin;		/* time from sync to picture	*/
-	__u32 right_margin;		/* time from picture to sync	*/
-	__u32 upper_margin;		/* time from sync to picture	*/
-	__u32 lower_margin;
-	__u32 hsync_len;		/* length of horizontal sync	*/
-	__u32 vsync_len;		/* length of vertical sync	*/
-	__u32 sync;			/* see FB_SYNC_*		*/
-	__u32 vmode;			/* see FB_VMODE_*		*/
-	__u32 rotate;			/* angle we rotate counter clockwise */
-	__u32 colorspace;		/* colorspace for FOURCC-based modes */
-	__u32 reserved[4];		/* Reserved for future compatibility */
-};
-
-struct fb_cmap {
-	__u32 start;			/* First entry	*/
-	__u32 len;			/* Number of entries */
-	__u16 *red;			/* Red values	*/
-	__u16 *green;
-	__u16 *blue;
-	__u16 *transp;			/* transparency, can be NULL */
-};
-
-struct fb_con2fbmap {
-	__u32 console;
-	__u32 framebuffer;
-};
-
-/* VESA Blanking Levels */
-#define VESA_NO_BLANKING        0
-#define VESA_VSYNC_SUSPEND      1
-#define VESA_HSYNC_SUSPEND      2
-#define VESA_POWERDOWN          3
-
-
-enum {
-	/* screen: unblanked, hsync: on,  vsync: on */
-	FB_BLANK_UNBLANK       = VESA_NO_BLANKING,
-
-	/* screen: blanked,   hsync: on,  vsync: on */
-	FB_BLANK_NORMAL        = VESA_NO_BLANKING + 1,
-
-	/* screen: blanked,   hsync: on,  vsync: off */
-	FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
-
-	/* screen: blanked,   hsync: off, vsync: on */
-	FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
-
-	/* screen: blanked,   hsync: off, vsync: off */
-	FB_BLANK_POWERDOWN     = VESA_POWERDOWN + 1
-};
-
-#define FB_VBLANK_VBLANKING	0x001	/* currently in a vertical blank */
-#define FB_VBLANK_HBLANKING	0x002	/* currently in a horizontal blank */
-#define FB_VBLANK_HAVE_VBLANK	0x004	/* vertical blanks can be detected */
-#define FB_VBLANK_HAVE_HBLANK	0x008	/* horizontal blanks can be detected */
-#define FB_VBLANK_HAVE_COUNT	0x010	/* global retrace counter is available */
-#define FB_VBLANK_HAVE_VCOUNT	0x020	/* the vcount field is valid */
-#define FB_VBLANK_HAVE_HCOUNT	0x040	/* the hcount field is valid */
-#define FB_VBLANK_VSYNCING	0x080	/* currently in a vsync */
-#define FB_VBLANK_HAVE_VSYNC	0x100	/* verical syncs can be detected */
-
-struct fb_vblank {
-	__u32 flags;			/* FB_VBLANK flags */
-	__u32 count;			/* counter of retraces since boot */
-	__u32 vcount;			/* current scanline position */
-	__u32 hcount;			/* current scandot position */
-	__u32 reserved[4];		/* reserved for future compatibility */
-};
-
-/* Internal HW accel */
-#define ROP_COPY 0
-#define ROP_XOR  1
-
-struct fb_copyarea {
-	__u32 dx;
-	__u32 dy;
-	__u32 width;
-	__u32 height;
-	__u32 sx;
-	__u32 sy;
-};
-
-struct fb_fillrect {
-	__u32 dx;	/* screen-relative */
-	__u32 dy;
-	__u32 width;
-	__u32 height;
-	__u32 color;
-	__u32 rop;
-};
-
-struct fb_image {
-	__u32 dx;		/* Where to place image */
-	__u32 dy;
-	__u32 width;		/* Size of image */
-	__u32 height;
-	__u32 fg_color;		/* Only used when a mono bitmap */
-	__u32 bg_color;
-	__u8  depth;		/* Depth of the image */
-	const char *data;	/* Pointer to image data */
-	struct fb_cmap cmap;	/* color map info */
-};
-
-/*
- * hardware cursor control
- */
-
-#define FB_CUR_SETIMAGE 0x01
-#define FB_CUR_SETPOS   0x02
-#define FB_CUR_SETHOT   0x04
-#define FB_CUR_SETCMAP  0x08
-#define FB_CUR_SETSHAPE 0x10
-#define FB_CUR_SETSIZE	0x20
-#define FB_CUR_SETALL   0xFF
-
-struct fbcurpos {
-	__u16 x, y;
-};
-
-struct fb_cursor {
-	__u16 set;		/* what to set */
-	__u16 enable;		/* cursor on/off */
-	__u16 rop;		/* bitop operation */
-	const char *mask;	/* cursor mask bits */
-	struct fbcurpos hot;	/* cursor hot spot */
-	struct fb_image	image;	/* Cursor image */
-};
-
-#ifdef CONFIG_FB_BACKLIGHT
-/* Settings for the generic backlight code */
-#define FB_BACKLIGHT_LEVELS	128
-#define FB_BACKLIGHT_MAX	0xFF
-#endif
-
-#ifdef __KERNEL__
 
 #include <linux/fs.h>
 #include <linux/init.h>
@@ -1181,6 +782,4 @@ extern int fb_find_mode(struct fb_var_screeninfo *var,
 			const struct fb_videomode *default_mode,
 			unsigned int default_bpp);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_FB_H */
diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h
index f550f894ba15..76ce329e656d 100644
--- a/include/linux/fcntl.h
+++ b/include/linux/fcntl.h
@@ -1,54 +1,8 @@
 #ifndef _LINUX_FCNTL_H
 #define _LINUX_FCNTL_H
 
-#include <asm/fcntl.h>
+#include <uapi/linux/fcntl.h>
 
-#define F_SETLEASE	(F_LINUX_SPECIFIC_BASE + 0)
-#define F_GETLEASE	(F_LINUX_SPECIFIC_BASE + 1)
-
-/*
- * Cancel a blocking posix lock; internal use only until we expose an
- * asynchronous lock api to userspace:
- */
-#define F_CANCELLK	(F_LINUX_SPECIFIC_BASE + 5)
-
-/* Create a file descriptor with FD_CLOEXEC set. */
-#define F_DUPFD_CLOEXEC	(F_LINUX_SPECIFIC_BASE + 6)
-
-/*
- * Request nofications on a directory.
- * See below for events that may be notified.
- */
-#define F_NOTIFY	(F_LINUX_SPECIFIC_BASE+2)
-
-/*
- * Set and get of pipe page size array
- */
-#define F_SETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 7)
-#define F_GETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 8)
-
-/*
- * Types of directory notifications that may be requested.
- */
-#define DN_ACCESS	0x00000001	/* File accessed */
-#define DN_MODIFY	0x00000002	/* File modified */
-#define DN_CREATE	0x00000004	/* File created */
-#define DN_DELETE	0x00000008	/* File removed */
-#define DN_RENAME	0x00000010	/* File renamed */
-#define DN_ATTRIB	0x00000020	/* File changed attibutes */
-#define DN_MULTISHOT	0x80000000	/* Don't remove notifier */
-
-#define AT_FDCWD		-100    /* Special value used to indicate
-                                           openat should use the current
-                                           working directory. */
-#define AT_SYMLINK_NOFOLLOW	0x100   /* Do not follow symbolic links.  */
-#define AT_REMOVEDIR		0x200   /* Remove directory instead of
-                                           unlinking file.  */
-#define AT_SYMLINK_FOLLOW	0x400   /* Follow symbolic links.  */
-#define AT_NO_AUTOMOUNT		0x800	/* Suppress terminal automount traversal */
-#define AT_EMPTY_PATH		0x1000	/* Allow empty relative pathname */
-
-#ifdef __KERNEL__
 
 #ifndef force_o_largefile
 #define force_o_largefile() (BITS_PER_LONG != 32)
@@ -74,6 +28,4 @@
 #define IS_SETLK(cmd)	(IS_SETLK32(cmd)  || IS_SETLK64(cmd))
 #define IS_SETLKW(cmd)	(IS_SETLKW32(cmd) || IS_SETLKW64(cmd))
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/fd.h b/include/linux/fd.h
index 72202b1b9a6a..69275bccc3e4 100644
--- a/include/linux/fd.h
+++ b/include/linux/fd.h
@@ -1,384 +1,8 @@
 #ifndef _LINUX_FD_H
 #define _LINUX_FD_H
 
-#include <linux/ioctl.h>
-#include <linux/compiler.h>
+#include <uapi/linux/fd.h>
 
-/* New file layout: Now the ioctl definitions immediately follow the
- * definitions of the structures that they use */
-
-/*
- * Geometry
- */
-struct floppy_struct {
-	unsigned int	size,		/* nr of sectors total */
-			sect,		/* sectors per track */
-			head,		/* nr of heads */
-			track,		/* nr of tracks */
-			stretch;	/* bit 0 !=0 means double track steps */
-					/* bit 1 != 0 means swap sides */
-					/* bits 2..9 give the first sector */
-					/*  number (the LSB is flipped) */
-#define FD_STRETCH 1
-#define FD_SWAPSIDES 2
-#define FD_ZEROBASED 4
-#define FD_SECTBASEMASK 0x3FC
-#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
-#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
-
-	unsigned char	gap,		/* gap1 size */
-
-			rate,		/* data rate. |= 0x40 for perpendicular */
-#define FD_2M 0x4
-#define FD_SIZECODEMASK 0x38
-#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
-#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
-			     512 : 128 << FD_SIZECODE(floppy) )
-#define FD_PERP 0x40
-
-			spec1,		/* stepping rate, head unload time */
-			fmt_gap;	/* gap2 size */
-	const char	* name; /* used only for predefined formats */
-};
-
-
-/* commands needing write access have 0x40 set */
-/* commands needing super user access have 0x80 set */
-
-#define FDCLRPRM _IO(2, 0x41)
-/* clear user-defined parameters */
-
-#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 
-#define FDSETMEDIAPRM FDSETPRM
-/* set user-defined parameters for current media */
-
-#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 
-#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
-#define FDDEFMEDIAPRM FDDEFPRM
-#define FDGETMEDIAPRM FDGETPRM
-/* set/get disk parameters */
-
-
-#define	FDMSGON  _IO(2,0x45)
-#define	FDMSGOFF _IO(2,0x46)
-/* issue/don't issue kernel messages on media type change */
-
-
-/* 
- * Formatting (obsolete)
- */
-#define FD_FILL_BYTE 0xF6 /* format fill byte. */
-
-struct format_descr {
-	unsigned int device,head,track;
-};
-
-#define FDFMTBEG _IO(2,0x47)
-/* begin formatting a disk */
-#define	FDFMTTRK _IOW(2,0x48, struct format_descr)
-/* format the specified track */
-#define FDFMTEND _IO(2,0x49)
-/* end formatting a disk */
-
-
-/*
- * Error thresholds
- */
-struct floppy_max_errors {
-	unsigned int
-	  abort,      /* number of errors to be reached before aborting */
-	  read_track, /* maximal number of errors permitted to read an
-		       * entire track at once */
-	  reset,      /* maximal number of errors before a reset is tried */
-	  recal,      /* maximal number of errors before a recalibrate is
-		       * tried */
-
-	  /*
-	   * Threshold for reporting FDC errors to the console.
-	   * Setting this to zero may flood your screen when using
-	   * ultra cheap floppies ;-)
-	   */
-	  reporting;
-
-};
-
-#define FDSETEMSGTRESH	_IO(2,0x4a)
-/* set fdc error reporting threshold */
-
-#define FDFLUSH  _IO(2,0x4b)
-/* flush buffers for media; either for verifying media, or for
- * handling a media change without closing the file descriptor */
-
-#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
-#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
-/* set/get abortion and read_track threshold. See also floppy_drive_params
- * structure */
-
-
-typedef char floppy_drive_name[16];
-#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
-/* get drive type: 5 1/4 or 3 1/2 */
-
-
-/*
- * Drive parameters (user modifiable)
- */
-struct floppy_drive_params {
-	signed char cmos;		/* CMOS type */
-	
-	/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 
-	 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
-	 */
-	unsigned long max_dtr;		/* Step rate, usec */
-	unsigned long hlt;     		/* Head load/settle time, msec */
-	unsigned long hut;     		/* Head unload time (remnant of 
-					 * 8" drives) */
-	unsigned long srt;     		/* Step rate, usec */
-
-	unsigned long spinup;		/* time needed for spinup (expressed
-					 * in jiffies) */
-	unsigned long spindown;		/* timeout needed for spindown */
-	unsigned char spindown_offset;	/* decides in which position the disk
-					 * will stop */
-	unsigned char select_delay;	/* delay to wait after select */
-	unsigned char rps;		/* rotations per second */
-	unsigned char tracks;		/* maximum number of tracks */
-	unsigned long timeout;		/* timeout for interrupt requests */
-	
-	unsigned char interleave_sect;	/* if there are more sectors, use 
-					 * interleave */
-	
-	struct floppy_max_errors max_errors;
-	
-	char flags;			/* various flags, including ftd_msg */
-/*
- * Announce successful media type detection and media information loss after
- * disk changes.
- * Also used to enable/disable printing of overrun warnings.
- */
-
-#define FTD_MSG 0x10
-#define FD_BROKEN_DCL 0x20
-#define FD_DEBUG 0x02
-#define FD_SILENT_DCL_CLEAR 0x4
-#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 
-				considerations */
-
-	char read_track;		/* use readtrack during probing? */
-
-/*
- * Auto-detection. Each drive type has eight formats which are
- * used in succession to try to read the disk. If the FDC cannot lock onto
- * the disk, the next format is tried. This uses the variable 'probing'.
- */
-	short autodetect[8];		/* autodetected formats */
-	
-	int checkfreq; /* how often should the drive be checked for disk 
-			* changes */
-	int native_format; /* native format of this drive */
-};
-
-enum {
-	FD_NEED_TWADDLE_BIT,	/* more magic */
-	FD_VERIFY_BIT,		/* inquire for write protection */
-	FD_DISK_NEWCHANGE_BIT,	/* change detected, and no action undertaken yet
-				 * to clear media change status */
-	FD_UNUSED_BIT,
-	FD_DISK_CHANGED_BIT,	/* disk has been changed since last i/o */
-	FD_DISK_WRITABLE_BIT	/* disk is writable */
-};
-
-#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
-#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
-/* set/get drive parameters */
-
-
-/*
- * Current drive state (not directly modifiable by user, readonly)
- */
-struct floppy_drive_struct {
-	unsigned long flags;
-/* values for these flags */
-#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
-#define FD_VERIFY (1 << FD_VERIFY_BIT)
-#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
-#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
-#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
-
-	unsigned long spinup_date;
-	unsigned long select_date;
-	unsigned long first_read_date;
-	short probed_format;
-	short track; /* current track */
-	short maxblock; /* id of highest block read */
-	short maxtrack; /* id of highest half track read */
-	int generation; /* how many diskchanges? */
-
-/*
- * (User-provided) media information is _not_ discarded after a media change
- * if the corresponding keep_data flag is non-zero. Positive values are
- * decremented after each probe.
- */
-	int keep_data;
-	
-	/* Prevent "aliased" accesses. */
-	int fd_ref;
-	int fd_device;
-	unsigned long last_checked; /* when was the drive last checked for a disk 
-			   * change? */
-	
-	char *dmabuf;
-	int bufblocks;
-};
-
-#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
-#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
-/* get drive state: GET returns the cached state, POLL polls for new state */
-
-
-/*
- * reset FDC
- */
-enum reset_mode {
-	FD_RESET_IF_NEEDED,	/* reset only if the reset flags is set */
-	FD_RESET_IF_RAWCMD,	/* obsolete */
-	FD_RESET_ALWAYS		/* reset always */
-};
-#define FDRESET _IO(2, 0x54)
-
-
-/*
- * FDC state
- */
-struct floppy_fdc_state {	
-	int spec1;		/* spec1 value last used */
-	int spec2;		/* spec2 value last used */
-	int dtr;
-	unsigned char version;	/* FDC version code */
-	unsigned char dor;
-	unsigned long address;	/* io address */
-	unsigned int rawcmd:2;
-	unsigned int reset:1;
-	unsigned int need_configure:1;
-	unsigned int perp_mode:2;
-	unsigned int has_fifo:1;
-	unsigned int driver_version;	/* version code for floppy driver */
-#define FD_DRIVER_VERSION 0x100
-/* user programs using the floppy API should use floppy_fdc_state to
- * get the version number of the floppy driver that they are running
- * on. If this version number is bigger than the one compiled into the
- * user program (the FD_DRIVER_VERSION define), it should be prepared
- * to bigger structures
- */
-
-	unsigned char track[4];
-	/* Position of the heads of the 4 units attached to this FDC,
-	 * as stored on the FDC. In the future, the position as stored
-	 * on the FDC might not agree with the actual physical
-	 * position of these drive heads. By allowing such
-	 * disagreement, it will be possible to reset the FDC without
-	 * incurring the expensive cost of repositioning all heads.
-	 * Right now, these positions are hard wired to 0. */
-
-};
-
-#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
-
-
-/*
- * Asynchronous Write error tracking
- */
-struct floppy_write_errors {
-	/* Write error logging.
-	 *
-	 * These fields can be cleared with the FDWERRORCLR ioctl.
-	 * Only writes that were attempted but failed due to a physical media
-	 * error are logged.  write(2) calls that fail and return an error code
-	 * to the user process are not counted.
-	 */
-
-	unsigned int write_errors;  /* number of physical write errors 
-				     * encountered */
-	
-	/* position of first and last write errors */
-	unsigned long first_error_sector;
-	int           first_error_generation;
-	unsigned long last_error_sector;
-	int           last_error_generation;
-	
-	unsigned int badness; /* highest retry count for a read or write 
-			       * operation */
-};
-
-#define FDWERRORCLR  _IO(2, 0x56)
-/* clear write error and badness information */
-#define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
-/* get write error and badness information */
-
-
-/*
- * Raw commands
- */
-/* new interface flag: now we can do them in batches */
-#define FDHAVEBATCHEDRAWCMD
-
-struct floppy_raw_cmd {
-	unsigned int flags;
-#define FD_RAW_READ 1
-#define FD_RAW_WRITE 2
-#define FD_RAW_NO_MOTOR 4
-#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
-#define FD_RAW_INTR 8    /* wait for an interrupt */
-#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
-#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 
-				    * completion */
-#define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
-#define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
-
-/* more "in" flags */
-#define FD_RAW_MORE 0x100  /* more records follow */
-#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
-#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
-#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
-				  * detection too */
-
-/* more "out" flags */
-#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
-#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
-
-	void __user *data;
-	char *kernel_data; /* location of data buffer in the kernel */
-	struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 
-				      * within the kernel */
-	long length; /* in: length of dma transfer. out: remaining bytes */
-	long phys_length; /* physical length, if different from dma length */
-	int buffer_length; /* length of allocated buffer */
-
-	unsigned char rate;
-	unsigned char cmd_count;
-	unsigned char cmd[16];
-	unsigned char reply_count;
-	unsigned char reply[16];
-	int track;
-	int resultcode;
-
-	int reserved1;
-	int reserved2;
-};
-
-#define FDRAWCMD _IO(2, 0x58)
-/* send a raw command to the fdc. Structure size not included, because of
- * batches */
-
-#define FDTWADDLE _IO(2, 0x59)
-/* flicker motor-on bit before reading a sector. Experimental */
-
-
-#define FDEJECT _IO(2, 0x5a)
-/* eject the disk */
-
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
 
@@ -398,5 +22,3 @@ struct compat_floppy_struct {
 #define FDGETPRM32 _IOR(2, 0x04, struct compat_floppy_struct)
 #endif
 #endif
-
-#endif
diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h
deleted file mode 100644
index 61ce64169004..000000000000
--- a/include/linux/fdreg.h
+++ /dev/null
@@ -1,137 +0,0 @@
-#ifndef _LINUX_FDREG_H
-#define _LINUX_FDREG_H
-/*
- * This file contains some defines for the floppy disk controller.
- * Various sources. Mostly "IBM Microcomputers: A Programmers
- * Handbook", Sanches and Canton.
- */
-
-#ifdef FDPATCHES
-#define FD_IOPORT fdc_state[fdc].address
-#else
-/* It would be a lot saner just to force fdc_state[fdc].address to always
-   be set ! FIXME */
-#define FD_IOPORT 0x3f0
-#endif
-
-/* Fd controller regs. S&C, about page 340 */
-#define FD_STATUS	(4 + FD_IOPORT )
-#define FD_DATA		(5 + FD_IOPORT )
-
-/* Digital Output Register */
-#define FD_DOR		(2 + FD_IOPORT )
-
-/* Digital Input Register (read) */
-#define FD_DIR		(7 + FD_IOPORT )
-
-/* Diskette Control Register (write)*/
-#define FD_DCR		(7 + FD_IOPORT )
-
-/* Bits of main status register */
-#define STATUS_BUSYMASK	0x0F		/* drive busy mask */
-#define STATUS_BUSY	0x10		/* FDC busy */
-#define STATUS_DMA	0x20		/* 0- DMA mode */
-#define STATUS_DIR	0x40		/* 0- cpu->fdc */
-#define STATUS_READY	0x80		/* Data reg ready */
-
-/* Bits of FD_ST0 */
-#define ST0_DS		0x03		/* drive select mask */
-#define ST0_HA		0x04		/* Head (Address) */
-#define ST0_NR		0x08		/* Not Ready */
-#define ST0_ECE		0x10		/* Equipment check error */
-#define ST0_SE		0x20		/* Seek end */
-#define ST0_INTR	0xC0		/* Interrupt code mask */
-
-/* Bits of FD_ST1 */
-#define ST1_MAM		0x01		/* Missing Address Mark */
-#define ST1_WP		0x02		/* Write Protect */
-#define ST1_ND		0x04		/* No Data - unreadable */
-#define ST1_OR		0x10		/* OverRun */
-#define ST1_CRC		0x20		/* CRC error in data or addr */
-#define ST1_EOC		0x80		/* End Of Cylinder */
-
-/* Bits of FD_ST2 */
-#define ST2_MAM		0x01		/* Missing Address Mark (again) */
-#define ST2_BC		0x02		/* Bad Cylinder */
-#define ST2_SNS		0x04		/* Scan Not Satisfied */
-#define ST2_SEH		0x08		/* Scan Equal Hit */
-#define ST2_WC		0x10		/* Wrong Cylinder */
-#define ST2_CRC		0x20		/* CRC error in data field */
-#define ST2_CM		0x40		/* Control Mark = deleted */
-
-/* Bits of FD_ST3 */
-#define ST3_HA		0x04		/* Head (Address) */
-#define ST3_DS		0x08		/* drive is double-sided */
-#define ST3_TZ		0x10		/* Track Zero signal (1=track 0) */
-#define ST3_RY		0x20		/* drive is ready */
-#define ST3_WP		0x40		/* Write Protect */
-#define ST3_FT		0x80		/* Drive Fault */
-
-/* Values for FD_COMMAND */
-#define FD_RECALIBRATE		0x07	/* move to track 0 */
-#define FD_SEEK			0x0F	/* seek track */
-#define FD_READ			0xE6	/* read with MT, MFM, SKip deleted */
-#define FD_WRITE		0xC5	/* write with MT, MFM */
-#define FD_SENSEI		0x08	/* Sense Interrupt Status */
-#define FD_SPECIFY		0x03	/* specify HUT etc */
-#define FD_FORMAT		0x4D	/* format one track */
-#define FD_VERSION		0x10	/* get version code */
-#define FD_CONFIGURE		0x13	/* configure FIFO operation */
-#define FD_PERPENDICULAR	0x12	/* perpendicular r/w mode */
-#define FD_GETSTATUS		0x04	/* read ST3 */
-#define FD_DUMPREGS		0x0E	/* dump the contents of the fdc regs */
-#define FD_READID		0xEA	/* prints the header of a sector */
-#define FD_UNLOCK		0x14	/* Fifo config unlock */
-#define FD_LOCK			0x94	/* Fifo config lock */
-#define FD_RSEEK_OUT		0x8f	/* seek out (i.e. to lower tracks) */
-#define FD_RSEEK_IN		0xcf	/* seek in (i.e. to higher tracks) */
-
-/* the following commands are new in the 82078. They are not used in the
- * floppy driver, except the first three. These commands may be useful for apps
- * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at
- * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */
-
-#define FD_PARTID		0x18	/* part id ("extended" version cmd) */
-#define FD_SAVE			0x2e	/* save fdc regs for later restore */
-#define FD_DRIVESPEC		0x8e	/* drive specification: Access to the
-					 * 2 Mbps data transfer rate for tape
-					 * drives */
-
-#define FD_RESTORE		0x4e    /* later restore */
-#define FD_POWERDOWN		0x27	/* configure FDC's powersave features */
-#define FD_FORMAT_N_WRITE	0xef    /* format and write in one go. */
-#define FD_OPTION		0x33	/* ISO format (which is a clean way to
-					 * pack more sectors on a track) */
-
-/* DMA commands */
-#define DMA_READ	0x46
-#define DMA_WRITE	0x4A
-
-/* FDC version return types */
-#define FDC_NONE	0x00
-#define FDC_UNKNOWN	0x10	/* DO NOT USE THIS TYPE EXCEPT IF IDENTIFICATION
-				   FAILS EARLY */
-#define FDC_8272A	0x20	/* Intel 8272a, NEC 765 */
-#define FDC_765ED	0x30	/* Non-Intel 1MB-compatible FDC, can't detect */
-#define FDC_82072	0x40	/* Intel 82072; 8272a + FIFO + DUMPREGS */
-#define FDC_82072A	0x45	/* 82072A (on Sparcs) */
-#define FDC_82077_ORIG	0x51	/* Original version of 82077AA, sans LOCK */
-#define FDC_82077	0x52	/* 82077AA-1 */
-#define FDC_82078_UNKN	0x5f	/* Unknown 82078 variant */
-#define FDC_82078	0x60	/* 44pin 82078 or 64pin 82078SL */
-#define FDC_82078_1	0x61	/* 82078-1 (2Mbps fdc) */
-#define FDC_S82078B	0x62	/* S82078B (first seen on Adaptec AVA-2825 VLB
-				 * SCSI/EIDE/Floppy controller) */
-#define FDC_87306	0x63	/* National Semiconductor PC 87306 */
-
-/*
- * Beware: the fdc type list is roughly sorted by increasing features.
- * Presence of features is tested by comparing the FDC version id with the
- * "oldest" version that has the needed feature.
- * If during FDC detection, an obscure test fails late in the sequence, don't
- * assign FDC_UNKNOWN. Else the FDC will be treated as a dumb 8272a, or worse.
- * This is especially true if the tests are unneeded.
- */
-
-#define FD_RESET_DELAY 20
-#endif
diff --git a/include/linux/fib_rules.h b/include/linux/fib_rules.h
deleted file mode 100644
index 51da65b68b85..000000000000
--- a/include/linux/fib_rules.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __LINUX_FIB_RULES_H
-#define __LINUX_FIB_RULES_H
-
-#include <linux/types.h>
-#include <linux/rtnetlink.h>
-
-/* rule is permanent, and cannot be deleted */
-#define FIB_RULE_PERMANENT	0x00000001
-#define FIB_RULE_INVERT		0x00000002
-#define FIB_RULE_UNRESOLVED	0x00000004
-#define FIB_RULE_IIF_DETACHED	0x00000008
-#define FIB_RULE_DEV_DETACHED	FIB_RULE_IIF_DETACHED
-#define FIB_RULE_OIF_DETACHED	0x00000010
-
-/* try to find source address in routing lookups */
-#define FIB_RULE_FIND_SADDR	0x00010000
-
-struct fib_rule_hdr {
-	__u8		family;
-	__u8		dst_len;
-	__u8		src_len;
-	__u8		tos;
-
-	__u8		table;
-	__u8		res1;	/* reserved */
-	__u8		res2;	/* reserved */
-	__u8		action;
-
-	__u32		flags;
-};
-
-enum {
-	FRA_UNSPEC,
-	FRA_DST,	/* destination address */
-	FRA_SRC,	/* source address */
-	FRA_IIFNAME,	/* interface name */
-#define FRA_IFNAME	FRA_IIFNAME
-	FRA_GOTO,	/* target to jump to (FR_ACT_GOTO) */
-	FRA_UNUSED2,
-	FRA_PRIORITY,	/* priority/preference */
-	FRA_UNUSED3,
-	FRA_UNUSED4,
-	FRA_UNUSED5,
-	FRA_FWMARK,	/* mark */
-	FRA_FLOW,	/* flow/class id */
-	FRA_UNUSED6,
-	FRA_UNUSED7,
-	FRA_UNUSED8,
-	FRA_TABLE,	/* Extended table id */
-	FRA_FWMASK,	/* mask for netfilter mark */
-	FRA_OIFNAME,
-	__FRA_MAX
-};
-
-#define FRA_MAX (__FRA_MAX - 1)
-
-enum {
-	FR_ACT_UNSPEC,
-	FR_ACT_TO_TBL,		/* Pass to fixed table */
-	FR_ACT_GOTO,		/* Jump to another rule */
-	FR_ACT_NOP,		/* No operation */
-	FR_ACT_RES3,
-	FR_ACT_RES4,
-	FR_ACT_BLACKHOLE,	/* Drop without notification */
-	FR_ACT_UNREACHABLE,	/* Drop with ENETUNREACH */
-	FR_ACT_PROHIBIT,	/* Drop with EACCES */
-	__FR_ACT_MAX,
-};
-
-#define FR_ACT_MAX (__FR_ACT_MAX - 1)
-
-#endif
diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h
deleted file mode 100644
index d830747f5c0b..000000000000
--- a/include/linux/fiemap.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * FS_IOC_FIEMAP ioctl infrastructure.
- *
- * Some portions copyright (C) 2007 Cluster File Systems, Inc
- *
- * Authors: Mark Fasheh <mfasheh@suse.com>
- *          Kalpak Shah <kalpak.shah@sun.com>
- *          Andreas Dilger <adilger@sun.com>
- */
-
-#ifndef _LINUX_FIEMAP_H
-#define _LINUX_FIEMAP_H
-
-#include <linux/types.h>
-
-struct fiemap_extent {
-	__u64 fe_logical;  /* logical offset in bytes for the start of
-			    * the extent from the beginning of the file */
-	__u64 fe_physical; /* physical offset in bytes for the start
-			    * of the extent from the beginning of the disk */
-	__u64 fe_length;   /* length in bytes for this extent */
-	__u64 fe_reserved64[2];
-	__u32 fe_flags;    /* FIEMAP_EXTENT_* flags for this extent */
-	__u32 fe_reserved[3];
-};
-
-struct fiemap {
-	__u64 fm_start;		/* logical offset (inclusive) at
-				 * which to start mapping (in) */
-	__u64 fm_length;	/* logical length of mapping which
-				 * userspace wants (in) */
-	__u32 fm_flags;		/* FIEMAP_FLAG_* flags for request (in/out) */
-	__u32 fm_mapped_extents;/* number of extents that were mapped (out) */
-	__u32 fm_extent_count;  /* size of fm_extents array (in) */
-	__u32 fm_reserved;
-	struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */
-};
-
-#define FIEMAP_MAX_OFFSET	(~0ULL)
-
-#define FIEMAP_FLAG_SYNC	0x00000001 /* sync file data before map */
-#define FIEMAP_FLAG_XATTR	0x00000002 /* map extended attribute tree */
-
-#define FIEMAP_FLAGS_COMPAT	(FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR)
-
-#define FIEMAP_EXTENT_LAST		0x00000001 /* Last extent in file. */
-#define FIEMAP_EXTENT_UNKNOWN		0x00000002 /* Data location unknown. */
-#define FIEMAP_EXTENT_DELALLOC		0x00000004 /* Location still pending.
-						    * Sets EXTENT_UNKNOWN. */
-#define FIEMAP_EXTENT_ENCODED		0x00000008 /* Data can not be read
-						    * while fs is unmounted */
-#define FIEMAP_EXTENT_DATA_ENCRYPTED	0x00000080 /* Data is encrypted by fs.
-						    * Sets EXTENT_NO_BYPASS. */
-#define FIEMAP_EXTENT_NOT_ALIGNED	0x00000100 /* Extent offsets may not be
-						    * block aligned. */
-#define FIEMAP_EXTENT_DATA_INLINE	0x00000200 /* Data mixed with metadata.
-						    * Sets EXTENT_NOT_ALIGNED.*/
-#define FIEMAP_EXTENT_DATA_TAIL		0x00000400 /* Multiple files in block.
-						    * Sets EXTENT_NOT_ALIGNED.*/
-#define FIEMAP_EXTENT_UNWRITTEN		0x00000800 /* Space allocated, but
-						    * no data (i.e. zero). */
-#define FIEMAP_EXTENT_MERGED		0x00001000 /* File does not natively
-						    * support extents. Result
-						    * merged for efficiency. */
-#define FIEMAP_EXTENT_SHARED		0x00002000 /* Space shared with other
-						    * files. */
-
-#endif /* _LINUX_FIEMAP_H */
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 2ded090e10f4..24d251f3bab0 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -1,141 +1,12 @@
 /*
  * Linux Socket Filter Data Structures
  */
-
 #ifndef __LINUX_FILTER_H__
 #define __LINUX_FILTER_H__
 
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#ifdef __KERNEL__
 #include <linux/atomic.h>
 #include <linux/compat.h>
-#endif
-
-/*
- * Current version of the filter code architecture.
- */
-#define BPF_MAJOR_VERSION 1
-#define BPF_MINOR_VERSION 1
-
-/*
- *	Try and keep these values and structures similar to BSD, especially
- *	the BPF code definitions which need to match so you can share filters
- */
- 
-struct sock_filter {	/* Filter block */
-	__u16	code;   /* Actual filter code */
-	__u8	jt;	/* Jump true */
-	__u8	jf;	/* Jump false */
-	__u32	k;      /* Generic multiuse field */
-};
-
-struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
-	unsigned short		len;	/* Number of filter blocks */
-	struct sock_filter __user *filter;
-};
-
-/*
- * Instruction classes
- */
-
-#define BPF_CLASS(code) ((code) & 0x07)
-#define         BPF_LD          0x00
-#define         BPF_LDX         0x01
-#define         BPF_ST          0x02
-#define         BPF_STX         0x03
-#define         BPF_ALU         0x04
-#define         BPF_JMP         0x05
-#define         BPF_RET         0x06
-#define         BPF_MISC        0x07
-
-/* ld/ldx fields */
-#define BPF_SIZE(code)  ((code) & 0x18)
-#define         BPF_W           0x00
-#define         BPF_H           0x08
-#define         BPF_B           0x10
-#define BPF_MODE(code)  ((code) & 0xe0)
-#define         BPF_IMM         0x00
-#define         BPF_ABS         0x20
-#define         BPF_IND         0x40
-#define         BPF_MEM         0x60
-#define         BPF_LEN         0x80
-#define         BPF_MSH         0xa0
-
-/* alu/jmp fields */
-#define BPF_OP(code)    ((code) & 0xf0)
-#define         BPF_ADD         0x00
-#define         BPF_SUB         0x10
-#define         BPF_MUL         0x20
-#define         BPF_DIV         0x30
-#define         BPF_OR          0x40
-#define         BPF_AND         0x50
-#define         BPF_LSH         0x60
-#define         BPF_RSH         0x70
-#define         BPF_NEG         0x80
-#define		BPF_MOD		0x90
-#define		BPF_XOR		0xa0
-
-#define         BPF_JA          0x00
-#define         BPF_JEQ         0x10
-#define         BPF_JGT         0x20
-#define         BPF_JGE         0x30
-#define         BPF_JSET        0x40
-#define BPF_SRC(code)   ((code) & 0x08)
-#define         BPF_K           0x00
-#define         BPF_X           0x08
-
-/* ret - BPF_K and BPF_X also apply */
-#define BPF_RVAL(code)  ((code) & 0x18)
-#define         BPF_A           0x10
-
-/* misc */
-#define BPF_MISCOP(code) ((code) & 0xf8)
-#define         BPF_TAX         0x00
-#define         BPF_TXA         0x80
-
-#ifndef BPF_MAXINSNS
-#define BPF_MAXINSNS 4096
-#endif
-
-/*
- * Macros for filter block array initializers.
- */
-#ifndef BPF_STMT
-#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
-#endif
-#ifndef BPF_JUMP
-#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
-#endif
-
-/*
- * Number of scratch memory words for: BPF_ST and BPF_STX
- */
-#define BPF_MEMWORDS 16
-
-/* RATIONALE. Negative offsets are invalid in BPF.
-   We use them to reference ancillary data.
-   Unlike introduction new instructions, it does not break
-   existing compilers/optimizers.
- */
-#define SKF_AD_OFF    (-0x1000)
-#define SKF_AD_PROTOCOL 0
-#define SKF_AD_PKTTYPE 	4
-#define SKF_AD_IFINDEX 	8
-#define SKF_AD_NLATTR	12
-#define SKF_AD_NLATTR_NEST	16
-#define SKF_AD_MARK 	20
-#define SKF_AD_QUEUE	24
-#define SKF_AD_HATYPE	28
-#define SKF_AD_RXHASH	32
-#define SKF_AD_CPU	36
-#define SKF_AD_ALU_XOR_X	40
-#define SKF_AD_MAX	44
-#define SKF_NET_OFF   (-0x100000)
-#define SKF_LL_OFF    (-0x200000)
-
-#ifdef __KERNEL__
+#include <uapi/linux/filter.h>
 
 #ifdef CONFIG_COMPAT
 /*
@@ -254,6 +125,4 @@ enum {
 	BPF_S_ANC_SECCOMP_LD_W,
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* __LINUX_FILTER_H__ */
diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h
deleted file mode 100644
index d50036953497..000000000000
--- a/include/linux/firewire-cdev.h
+++ /dev/null
@@ -1,1039 +0,0 @@
-/*
- * Char device interface.
- *
- * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- */
-
-#ifndef _LINUX_FIREWIRE_CDEV_H
-#define _LINUX_FIREWIRE_CDEV_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/firewire-constants.h>
-
-/* available since kernel version 2.6.22 */
-#define FW_CDEV_EVENT_BUS_RESET				0x00
-#define FW_CDEV_EVENT_RESPONSE				0x01
-#define FW_CDEV_EVENT_REQUEST				0x02
-#define FW_CDEV_EVENT_ISO_INTERRUPT			0x03
-
-/* available since kernel version 2.6.30 */
-#define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED		0x04
-#define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED		0x05
-
-/* available since kernel version 2.6.36 */
-#define FW_CDEV_EVENT_REQUEST2				0x06
-#define FW_CDEV_EVENT_PHY_PACKET_SENT			0x07
-#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED		0x08
-#define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL	0x09
-
-/**
- * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
- * @closure:	For arbitrary use by userspace
- * @type:	Discriminates the fw_cdev_event_ types
- *
- * This struct may be used to access generic members of all fw_cdev_event_
- * types regardless of the specific type.
- *
- * Data passed in the @closure field for a request will be returned in the
- * corresponding event.  It is big enough to hold a pointer on all platforms.
- * The ioctl used to set @closure depends on the @type of event.
- */
-struct fw_cdev_event_common {
-	__u64 closure;
-	__u32 type;
-};
-
-/**
- * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred
- * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl
- * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET
- * @node_id:       New node ID of this node
- * @local_node_id: Node ID of the local node, i.e. of the controller
- * @bm_node_id:    Node ID of the bus manager
- * @irm_node_id:   Node ID of the iso resource manager
- * @root_node_id:  Node ID of the root node
- * @generation:    New bus generation
- *
- * This event is sent when the bus the device belongs to goes through a bus
- * reset.  It provides information about the new bus configuration, such as
- * new node ID for this device, new root ID, and others.
- *
- * If @bm_node_id is 0xffff right after bus reset it can be reread by an
- * %FW_CDEV_IOC_GET_INFO ioctl after bus manager selection was finished.
- * Kernels with ABI version < 4 do not set @bm_node_id.
- */
-struct fw_cdev_event_bus_reset {
-	__u64 closure;
-	__u32 type;
-	__u32 node_id;
-	__u32 local_node_id;
-	__u32 bm_node_id;
-	__u32 irm_node_id;
-	__u32 root_node_id;
-	__u32 generation;
-};
-
-/**
- * struct fw_cdev_event_response - Sent when a response packet was received
- * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST
- *		or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST
- *		or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl
- * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
- * @rcode:	Response code returned by the remote node
- * @length:	Data length, i.e. the response's payload size in bytes
- * @data:	Payload data, if any
- *
- * This event is sent when the stack receives a response to an outgoing request
- * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl.  The payload data for responses
- * carrying data (read and lock responses) follows immediately and can be
- * accessed through the @data field.
- *
- * The event is also generated after conclusions of transactions that do not
- * involve response packets.  This includes unified write transactions,
- * broadcast write transactions, and transmission of asynchronous stream
- * packets.  @rcode indicates success or failure of such transmissions.
- */
-struct fw_cdev_event_response {
-	__u64 closure;
-	__u32 type;
-	__u32 rcode;
-	__u32 length;
-	__u32 data[0];
-};
-
-/**
- * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2
- * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
- *
- * This event is sent instead of &fw_cdev_event_request2 if the kernel or
- * the client implements ABI version <= 3.  &fw_cdev_event_request lacks
- * essential information; use &fw_cdev_event_request2 instead.
- */
-struct fw_cdev_event_request {
-	__u64 closure;
-	__u32 type;
-	__u32 tcode;
-	__u64 offset;
-	__u32 handle;
-	__u32 length;
-	__u32 data[0];
-};
-
-/**
- * struct fw_cdev_event_request2 - Sent on incoming request to an address region
- * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
- * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2
- * @tcode:	Transaction code of the incoming request
- * @offset:	The offset into the 48-bit per-node address space
- * @source_node_id: Sender node ID
- * @destination_node_id: Destination node ID
- * @card:	The index of the card from which the request came
- * @generation:	Bus generation in which the request is valid
- * @handle:	Reference to the kernel-side pending request
- * @length:	Data length, i.e. the request's payload size in bytes
- * @data:	Incoming data, if any
- *
- * This event is sent when the stack receives an incoming request to an address
- * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl.  The request is
- * guaranteed to be completely contained in the specified region.  Userspace is
- * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl,
- * using the same @handle.
- *
- * The payload data for requests carrying data (write and lock requests)
- * follows immediately and can be accessed through the @data field.
- *
- * Unlike &fw_cdev_event_request, @tcode of lock requests is one of the
- * firewire-core specific %TCODE_LOCK_MASK_SWAP...%TCODE_LOCK_VENDOR_DEPENDENT,
- * i.e. encodes the extended transaction code.
- *
- * @card may differ from &fw_cdev_get_info.card because requests are received
- * from all cards of the Linux host.  @source_node_id, @destination_node_id, and
- * @generation pertain to that card.  Destination node ID and bus generation may
- * therefore differ from the corresponding fields of the last
- * &fw_cdev_event_bus_reset.
- *
- * @destination_node_id may also differ from the current node ID because of a
- * non-local bus ID part or in case of a broadcast write request.  Note, a
- * client must call an %FW_CDEV_IOC_SEND_RESPONSE ioctl even in case of a
- * broadcast write request; the kernel will then release the kernel-side pending
- * request but will not actually send a response packet.
- *
- * In case of a write request to FCP_REQUEST or FCP_RESPONSE, the kernel already
- * sent a write response immediately after the request was received; in this
- * case the client must still call an %FW_CDEV_IOC_SEND_RESPONSE ioctl to
- * release the kernel-side pending request, though another response won't be
- * sent.
- *
- * If the client subsequently needs to initiate requests to the sender node of
- * an &fw_cdev_event_request2, it needs to use a device file with matching
- * card index, node ID, and generation for outbound requests.
- */
-struct fw_cdev_event_request2 {
-	__u64 closure;
-	__u32 type;
-	__u32 tcode;
-	__u64 offset;
-	__u32 source_node_id;
-	__u32 destination_node_id;
-	__u32 card;
-	__u32 generation;
-	__u32 handle;
-	__u32 length;
-	__u32 data[0];
-};
-
-/**
- * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed
- * @closure:	See &fw_cdev_event_common;
- *		set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
- * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT
- * @cycle:	Cycle counter of the last completed packet
- * @header_length: Total length of following headers, in bytes
- * @header:	Stripped headers, if any
- *
- * This event is sent when the controller has completed an &fw_cdev_iso_packet
- * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with
- * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets
- * without the interrupt bit set that the kernel's internal buffer for @header
- * is about to overflow.  (In the last case, kernels with ABI version < 5 drop
- * header data up to the next interrupt packet.)
- *
- * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT):
- *
- * In version 3 and some implementations of version 2 of the ABI, &header_length
- * is a multiple of 4 and &header contains timestamps of all packets up until
- * the interrupt packet.  The format of the timestamps is as described below for
- * isochronous reception.  In version 1 of the ABI, &header_length was 0.
- *
- * Isochronous receive events (context type %FW_CDEV_ISO_CONTEXT_RECEIVE):
- *
- * The headers stripped of all packets up until and including the interrupt
- * packet are returned in the @header field.  The amount of header data per
- * packet is as specified at iso context creation by
- * &fw_cdev_create_iso_context.header_size.
- *
- * Hence, _interrupt.header_length / _context.header_size is the number of
- * packets received in this interrupt event.  The client can now iterate
- * through the mmap()'ed DMA buffer according to this number of packets and
- * to the buffer sizes as the client specified in &fw_cdev_queue_iso.
- *
- * Since version 2 of this ABI, the portion for each packet in _interrupt.header
- * consists of the 1394 isochronous packet header, followed by a timestamp
- * quadlet if &fw_cdev_create_iso_context.header_size > 4, followed by quadlets
- * from the packet payload if &fw_cdev_create_iso_context.header_size > 8.
- *
- * Format of 1394 iso packet header:  16 bits data_length, 2 bits tag, 6 bits
- * channel, 4 bits tcode, 4 bits sy, in big endian byte order.
- * data_length is the actual received size of the packet without the four
- * 1394 iso packet header bytes.
- *
- * Format of timestamp:  16 bits invalid, 3 bits cycleSeconds, 13 bits
- * cycleCount, in big endian byte order.
- *
- * In version 1 of the ABI, no timestamp quadlet was inserted; instead, payload
- * data followed directly after the 1394 is header if header_size > 4.
- * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
- */
-struct fw_cdev_event_iso_interrupt {
-	__u64 closure;
-	__u32 type;
-	__u32 cycle;
-	__u32 header_length;
-	__u32 header[0];
-};
-
-/**
- * struct fw_cdev_event_iso_interrupt_mc - An iso buffer chunk was completed
- * @closure:	See &fw_cdev_event_common;
- *		set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
- * @type:	%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
- * @completed:	Offset into the receive buffer; data before this offset is valid
- *
- * This event is sent in multichannel contexts (context type
- * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer
- * chunks that have been completely filled and that have the
- * %FW_CDEV_ISO_INTERRUPT bit set, or when explicitly requested with
- * %FW_CDEV_IOC_FLUSH_ISO.
- *
- * The buffer is continuously filled with the following data, per packet:
- *  - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt,
- *    but in little endian byte order,
- *  - packet payload (as many bytes as specified in the data_length field of
- *    the 1394 iso packet header) in big endian byte order,
- *  - 0...3 padding bytes as needed to align the following trailer quadlet,
- *  - trailer quadlet, containing the reception timestamp as described at
- *    &fw_cdev_event_iso_interrupt, but in little endian byte order.
- *
- * Hence the per-packet size is data_length (rounded up to a multiple of 4) + 8.
- * When processing the data, stop before a packet that would cross the
- * @completed offset.
- *
- * A packet near the end of a buffer chunk will typically spill over into the
- * next queued buffer chunk.  It is the responsibility of the client to check
- * for this condition, assemble a broken-up packet from its parts, and not to
- * re-queue any buffer chunks in which as yet unread packet parts reside.
- */
-struct fw_cdev_event_iso_interrupt_mc {
-	__u64 closure;
-	__u32 type;
-	__u32 completed;
-};
-
-/**
- * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
- * @closure:	See &fw_cdev_event_common;
- *		set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
- * @type:	%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
- *		%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
- * @handle:	Reference by which an allocated resource can be deallocated
- * @channel:	Isochronous channel which was (de)allocated, if any
- * @bandwidth:	Bandwidth allocation units which were (de)allocated, if any
- *
- * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous
- * resource was allocated at the IRM.  The client has to check @channel and
- * @bandwidth for whether the allocation actually succeeded.
- *
- * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous
- * resource was deallocated at the IRM.  It is also sent when automatic
- * reallocation after a bus reset failed.
- *
- * @channel is <0 if no channel was (de)allocated or if reallocation failed.
- * @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed.
- */
-struct fw_cdev_event_iso_resource {
-	__u64 closure;
-	__u32 type;
-	__u32 handle;
-	__s32 channel;
-	__s32 bandwidth;
-};
-
-/**
- * struct fw_cdev_event_phy_packet - A PHY packet was transmitted or received
- * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET
- *		or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl
- * @type:	%FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED
- * @rcode:	%RCODE_..., indicates success or failure of transmission
- * @length:	Data length in bytes
- * @data:	Incoming data
- *
- * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty,
- * except in case of a ping packet:  Then, @length is 4, and @data[0] is the
- * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE.
- *
- * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data
- * consists of the two PHY packet quadlets, in host byte order.
- */
-struct fw_cdev_event_phy_packet {
-	__u64 closure;
-	__u32 type;
-	__u32 rcode;
-	__u32 length;
-	__u32 data[0];
-};
-
-/**
- * union fw_cdev_event - Convenience union of fw_cdev_event_ types
- * @common:		Valid for all types
- * @bus_reset:		Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
- * @response:		Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
- * @request:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST
- * @request2:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST2
- * @iso_interrupt:	Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
- * @iso_interrupt_mc:	Valid if @common.type ==
- *				%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
- * @iso_resource:	Valid if @common.type ==
- *				%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
- *				%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
- * @phy_packet:		Valid if @common.type ==
- *				%FW_CDEV_EVENT_PHY_PACKET_SENT or
- *				%FW_CDEV_EVENT_PHY_PACKET_RECEIVED
- *
- * Convenience union for userspace use.  Events could be read(2) into an
- * appropriately aligned char buffer and then cast to this union for further
- * processing.  Note that for a request, response or iso_interrupt event,
- * the data[] or header[] may make the size of the full event larger than
- * sizeof(union fw_cdev_event).  Also note that if you attempt to read(2)
- * an event into a buffer that is not large enough for it, the data that does
- * not fit will be discarded so that the next read(2) will return a new event.
- */
-union fw_cdev_event {
-	struct fw_cdev_event_common		common;
-	struct fw_cdev_event_bus_reset		bus_reset;
-	struct fw_cdev_event_response		response;
-	struct fw_cdev_event_request		request;
-	struct fw_cdev_event_request2		request2;		/* added in 2.6.36 */
-	struct fw_cdev_event_iso_interrupt	iso_interrupt;
-	struct fw_cdev_event_iso_interrupt_mc	iso_interrupt_mc;	/* added in 2.6.36 */
-	struct fw_cdev_event_iso_resource	iso_resource;		/* added in 2.6.30 */
-	struct fw_cdev_event_phy_packet		phy_packet;		/* added in 2.6.36 */
-};
-
-/* available since kernel version 2.6.22 */
-#define FW_CDEV_IOC_GET_INFO           _IOWR('#', 0x00, struct fw_cdev_get_info)
-#define FW_CDEV_IOC_SEND_REQUEST        _IOW('#', 0x01, struct fw_cdev_send_request)
-#define FW_CDEV_IOC_ALLOCATE           _IOWR('#', 0x02, struct fw_cdev_allocate)
-#define FW_CDEV_IOC_DEALLOCATE          _IOW('#', 0x03, struct fw_cdev_deallocate)
-#define FW_CDEV_IOC_SEND_RESPONSE       _IOW('#', 0x04, struct fw_cdev_send_response)
-#define FW_CDEV_IOC_INITIATE_BUS_RESET  _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset)
-#define FW_CDEV_IOC_ADD_DESCRIPTOR     _IOWR('#', 0x06, struct fw_cdev_add_descriptor)
-#define FW_CDEV_IOC_REMOVE_DESCRIPTOR   _IOW('#', 0x07, struct fw_cdev_remove_descriptor)
-#define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context)
-#define FW_CDEV_IOC_QUEUE_ISO          _IOWR('#', 0x09, struct fw_cdev_queue_iso)
-#define FW_CDEV_IOC_START_ISO           _IOW('#', 0x0a, struct fw_cdev_start_iso)
-#define FW_CDEV_IOC_STOP_ISO            _IOW('#', 0x0b, struct fw_cdev_stop_iso)
-
-/* available since kernel version 2.6.24 */
-#define FW_CDEV_IOC_GET_CYCLE_TIMER     _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer)
-
-/* available since kernel version 2.6.30 */
-#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE       _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource)
-#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE      _IOW('#', 0x0e, struct fw_cdev_deallocate)
-#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE   _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource)
-#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource)
-#define FW_CDEV_IOC_GET_SPEED                     _IO('#', 0x11) /* returns speed code */
-#define FW_CDEV_IOC_SEND_BROADCAST_REQUEST       _IOW('#', 0x12, struct fw_cdev_send_request)
-#define FW_CDEV_IOC_SEND_STREAM_PACKET           _IOW('#', 0x13, struct fw_cdev_send_stream_packet)
-
-/* available since kernel version 2.6.34 */
-#define FW_CDEV_IOC_GET_CYCLE_TIMER2   _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2)
-
-/* available since kernel version 2.6.36 */
-#define FW_CDEV_IOC_SEND_PHY_PACKET    _IOWR('#', 0x15, struct fw_cdev_send_phy_packet)
-#define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets)
-#define FW_CDEV_IOC_SET_ISO_CHANNELS    _IOW('#', 0x17, struct fw_cdev_set_iso_channels)
-
-/* available since kernel version 3.4 */
-#define FW_CDEV_IOC_FLUSH_ISO           _IOW('#', 0x18, struct fw_cdev_flush_iso)
-
-/*
- * ABI version history
- *  1  (2.6.22)  - initial version
- *     (2.6.24)  - added %FW_CDEV_IOC_GET_CYCLE_TIMER
- *  2  (2.6.30)  - changed &fw_cdev_event_iso_interrupt.header if
- *                 &fw_cdev_create_iso_context.header_size is 8 or more
- *               - added %FW_CDEV_IOC_*_ISO_RESOURCE*,
- *                 %FW_CDEV_IOC_GET_SPEED, %FW_CDEV_IOC_SEND_BROADCAST_REQUEST,
- *                 %FW_CDEV_IOC_SEND_STREAM_PACKET
- *     (2.6.32)  - added time stamp to xmit &fw_cdev_event_iso_interrupt
- *     (2.6.33)  - IR has always packet-per-buffer semantics now, not one of
- *                 dual-buffer or packet-per-buffer depending on hardware
- *               - shared use and auto-response for FCP registers
- *  3  (2.6.34)  - made &fw_cdev_get_cycle_timer reliable
- *               - added %FW_CDEV_IOC_GET_CYCLE_TIMER2
- *  4  (2.6.36)  - added %FW_CDEV_EVENT_REQUEST2, %FW_CDEV_EVENT_PHY_PACKET_*,
- *                 and &fw_cdev_allocate.region_end
- *               - implemented &fw_cdev_event_bus_reset.bm_node_id
- *               - added %FW_CDEV_IOC_SEND_PHY_PACKET, _RECEIVE_PHY_PACKETS
- *               - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL,
- *                 %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and
- *                 %FW_CDEV_IOC_SET_ISO_CHANNELS
- *  5  (3.4)     - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to
- *                 avoid dropping data
- *               - added %FW_CDEV_IOC_FLUSH_ISO
- */
-
-/**
- * struct fw_cdev_get_info - General purpose information ioctl
- * @version:	The version field is just a running serial number.  Both an
- *		input parameter (ABI version implemented by the client) and
- *		output parameter (ABI version implemented by the kernel).
- *		A client shall fill in the ABI @version for which the client
- *		was implemented.  This is necessary for forward compatibility.
- * @rom_length:	If @rom is non-zero, up to @rom_length bytes of Configuration
- *		ROM will be copied into that user space address.  In either
- *		case, @rom_length is updated with the actual length of the
- *		Configuration ROM.
- * @rom:	If non-zero, address of a buffer to be filled by a copy of the
- *		device's Configuration ROM
- * @bus_reset:	If non-zero, address of a buffer to be filled by a
- *		&struct fw_cdev_event_bus_reset with the current state
- *		of the bus.  This does not cause a bus reset to happen.
- * @bus_reset_closure: Value of &closure in this and subsequent bus reset events
- * @card:	The index of the card this device belongs to
- *
- * The %FW_CDEV_IOC_GET_INFO ioctl is usually the very first one which a client
- * performs right after it opened a /dev/fw* file.
- *
- * As a side effect, reception of %FW_CDEV_EVENT_BUS_RESET events to be read(2)
- * is started by this ioctl.
- */
-struct fw_cdev_get_info {
-	__u32 version;
-	__u32 rom_length;
-	__u64 rom;
-	__u64 bus_reset;
-	__u64 bus_reset_closure;
-	__u32 card;
-};
-
-/**
- * struct fw_cdev_send_request - Send an asynchronous request packet
- * @tcode:	Transaction code of the request
- * @length:	Length of outgoing payload, in bytes
- * @offset:	48-bit offset at destination node
- * @closure:	Passed back to userspace in the response event
- * @data:	Userspace pointer to payload
- * @generation:	The bus generation where packet is valid
- *
- * Send a request to the device.  This ioctl implements all outgoing requests.
- * Both quadlet and block request specify the payload as a pointer to the data
- * in the @data field.  Once the transaction completes, the kernel writes an
- * &fw_cdev_event_response event back.  The @closure field is passed back to
- * user space in the response event.
- */
-struct fw_cdev_send_request {
-	__u32 tcode;
-	__u32 length;
-	__u64 offset;
-	__u64 closure;
-	__u64 data;
-	__u32 generation;
-};
-
-/**
- * struct fw_cdev_send_response - Send an asynchronous response packet
- * @rcode:	Response code as determined by the userspace handler
- * @length:	Length of outgoing payload, in bytes
- * @data:	Userspace pointer to payload
- * @handle:	The handle from the &fw_cdev_event_request
- *
- * Send a response to an incoming request.  By setting up an address range using
- * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests.  An
- * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must
- * send a reply using this ioctl.  The event has a handle to the kernel-side
- * pending transaction, which should be used with this ioctl.
- */
-struct fw_cdev_send_response {
-	__u32 rcode;
-	__u32 length;
-	__u64 data;
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_allocate - Allocate a CSR in an address range
- * @offset:	Start offset of the address range
- * @closure:	To be passed back to userspace in request events
- * @length:	Length of the CSR, in bytes
- * @handle:	Handle to the allocation, written by the kernel
- * @region_end:	First address above the address range (added in ABI v4, 2.6.36)
- *
- * Allocate an address range in the 48-bit address space on the local node
- * (the controller).  This allows userspace to listen for requests with an
- * offset within that address range.  Every time when the kernel receives a
- * request within the range, an &fw_cdev_event_request2 event will be emitted.
- * (If the kernel or the client implements ABI version <= 3, an
- * &fw_cdev_event_request will be generated instead.)
- *
- * The @closure field is passed back to userspace in these request events.
- * The @handle field is an out parameter, returning a handle to the allocated
- * range to be used for later deallocation of the range.
- *
- * The address range is allocated on all local nodes.  The address allocation
- * is exclusive except for the FCP command and response registers.  If an
- * exclusive address region is already in use, the ioctl fails with errno set
- * to %EBUSY.
- *
- * If kernel and client implement ABI version >= 4, the kernel looks up a free
- * spot of size @length inside [@offset..@region_end) and, if found, writes
- * the start address of the new CSR back in @offset.  I.e. @offset is an
- * in and out parameter.  If this automatic placement of a CSR in a bigger
- * address range is not desired, the client simply needs to set @region_end
- * = @offset + @length.
- *
- * If the kernel or the client implements ABI version <= 3, @region_end is
- * ignored and effectively assumed to be @offset + @length.
- *
- * @region_end is only present in a kernel header >= 2.6.36.  If necessary,
- * this can for example be tested by #ifdef FW_CDEV_EVENT_REQUEST2.
- */
-struct fw_cdev_allocate {
-	__u64 offset;
-	__u64 closure;
-	__u32 length;
-	__u32 handle;
-	__u64 region_end;	/* available since kernel version 2.6.36 */
-};
-
-/**
- * struct fw_cdev_deallocate - Free a CSR address range or isochronous resource
- * @handle:	Handle to the address range or iso resource, as returned by the
- *		kernel when the range or resource was allocated
- */
-struct fw_cdev_deallocate {
-	__u32 handle;
-};
-
-#define FW_CDEV_LONG_RESET	0
-#define FW_CDEV_SHORT_RESET	1
-
-/**
- * struct fw_cdev_initiate_bus_reset - Initiate a bus reset
- * @type:	%FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET
- *
- * Initiate a bus reset for the bus this device is on.  The bus reset can be
- * either the original (long) bus reset or the arbitrated (short) bus reset
- * introduced in 1394a-2000.
- *
- * The ioctl returns immediately.  A subsequent &fw_cdev_event_bus_reset
- * indicates when the reset actually happened.  Since ABI v4, this may be
- * considerably later than the ioctl because the kernel ensures a grace period
- * between subsequent bus resets as per IEEE 1394 bus management specification.
- */
-struct fw_cdev_initiate_bus_reset {
-	__u32 type;
-};
-
-/**
- * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM
- * @immediate:	If non-zero, immediate key to insert before pointer
- * @key:	Upper 8 bits of root directory pointer
- * @data:	Userspace pointer to contents of descriptor block
- * @length:	Length of descriptor block data, in quadlets
- * @handle:	Handle to the descriptor, written by the kernel
- *
- * Add a descriptor block and optionally a preceding immediate key to the local
- * node's Configuration ROM.
- *
- * The @key field specifies the upper 8 bits of the descriptor root directory
- * pointer and the @data and @length fields specify the contents. The @key
- * should be of the form 0xXX000000. The offset part of the root directory entry
- * will be filled in by the kernel.
- *
- * If not 0, the @immediate field specifies an immediate key which will be
- * inserted before the root directory pointer.
- *
- * @immediate, @key, and @data array elements are CPU-endian quadlets.
- *
- * If successful, the kernel adds the descriptor and writes back a @handle to
- * the kernel-side object to be used for later removal of the descriptor block
- * and immediate key.  The kernel will also generate a bus reset to signal the
- * change of the Configuration ROM to other nodes.
- *
- * This ioctl affects the Configuration ROMs of all local nodes.
- * The ioctl only succeeds on device files which represent a local node.
- */
-struct fw_cdev_add_descriptor {
-	__u32 immediate;
-	__u32 key;
-	__u64 data;
-	__u32 length;
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_remove_descriptor - Remove contents from the Configuration ROM
- * @handle:	Handle to the descriptor, as returned by the kernel when the
- *		descriptor was added
- *
- * Remove a descriptor block and accompanying immediate key from the local
- * nodes' Configuration ROMs.  The kernel will also generate a bus reset to
- * signal the change of the Configuration ROM to other nodes.
- */
-struct fw_cdev_remove_descriptor {
-	__u32 handle;
-};
-
-#define FW_CDEV_ISO_CONTEXT_TRANSMIT			0
-#define FW_CDEV_ISO_CONTEXT_RECEIVE			1
-#define FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL	2 /* added in 2.6.36 */
-
-/**
- * struct fw_cdev_create_iso_context - Create a context for isochronous I/O
- * @type:	%FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE or
- *		%FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL
- * @header_size: Header size to strip in single-channel reception
- * @channel:	Channel to bind to in single-channel reception or transmission
- * @speed:	Transmission speed
- * @closure:	To be returned in &fw_cdev_event_iso_interrupt or
- *		&fw_cdev_event_iso_interrupt_multichannel
- * @handle:	Handle to context, written back by kernel
- *
- * Prior to sending or receiving isochronous I/O, a context must be created.
- * The context records information about the transmit or receive configuration
- * and typically maps to an underlying hardware resource.  A context is set up
- * for either sending or receiving.  It is bound to a specific isochronous
- * @channel.
- *
- * In case of multichannel reception, @header_size and @channel are ignored
- * and the channels are selected by %FW_CDEV_IOC_SET_ISO_CHANNELS.
- *
- * For %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, @header_size must be at least 4
- * and must be a multiple of 4.  It is ignored in other context types.
- *
- * @speed is ignored in receive context types.
- *
- * If a context was successfully created, the kernel writes back a handle to the
- * context, which must be passed in for subsequent operations on that context.
- *
- * Limitations:
- * No more than one iso context can be created per fd.
- * The total number of contexts that all userspace and kernelspace drivers can
- * create on a card at a time is a hardware limit, typically 4 or 8 contexts per
- * direction, and of them at most one multichannel receive context.
- */
-struct fw_cdev_create_iso_context {
-	__u32 type;
-	__u32 header_size;
-	__u32 channel;
-	__u32 speed;
-	__u64 closure;
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_set_iso_channels - Select channels in multichannel reception
- * @channels:	Bitmask of channels to listen to
- * @handle:	Handle of the mutichannel receive context
- *
- * @channels is the bitwise or of 1ULL << n for each channel n to listen to.
- *
- * The ioctl fails with errno %EBUSY if there is already another receive context
- * on a channel in @channels.  In that case, the bitmask of all unoccupied
- * channels is returned in @channels.
- */
-struct fw_cdev_set_iso_channels {
-	__u64 channels;
-	__u32 handle;
-};
-
-#define FW_CDEV_ISO_PAYLOAD_LENGTH(v)	(v)
-#define FW_CDEV_ISO_INTERRUPT		(1 << 16)
-#define FW_CDEV_ISO_SKIP		(1 << 17)
-#define FW_CDEV_ISO_SYNC		(1 << 17)
-#define FW_CDEV_ISO_TAG(v)		((v) << 18)
-#define FW_CDEV_ISO_SY(v)		((v) << 20)
-#define FW_CDEV_ISO_HEADER_LENGTH(v)	((v) << 24)
-
-/**
- * struct fw_cdev_iso_packet - Isochronous packet
- * @control:	Contains the header length (8 uppermost bits),
- *		the sy field (4 bits), the tag field (2 bits), a sync flag
- *		or a skip flag (1 bit), an interrupt flag (1 bit), and the
- *		payload length (16 lowermost bits)
- * @header:	Header and payload in case of a transmit context.
- *
- * &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
- * Use the FW_CDEV_ISO_ macros to fill in @control.
- * The @header array is empty in case of receive contexts.
- *
- * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT:
- *
- * @control.HEADER_LENGTH must be a multiple of 4.  It specifies the numbers of
- * bytes in @header that will be prepended to the packet's payload.  These bytes
- * are copied into the kernel and will not be accessed after the ioctl has
- * returned.
- *
- * The @control.SY and TAG fields are copied to the iso packet header.  These
- * fields are specified by IEEE 1394a and IEC 61883-1.
- *
- * The @control.SKIP flag specifies that no packet is to be sent in a frame.
- * When using this, all other fields except @control.INTERRUPT must be zero.
- *
- * When a packet with the @control.INTERRUPT flag set has been completed, an
- * &fw_cdev_event_iso_interrupt event will be sent.
- *
- * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE:
- *
- * @control.HEADER_LENGTH must be a multiple of the context's header_size.
- * If the HEADER_LENGTH is larger than the context's header_size, multiple
- * packets are queued for this entry.
- *
- * The @control.SY and TAG fields are ignored.
- *
- * If the @control.SYNC flag is set, the context drops all packets until a
- * packet with a sy field is received which matches &fw_cdev_start_iso.sync.
- *
- * @control.PAYLOAD_LENGTH defines how many payload bytes can be received for
- * one packet (in addition to payload quadlets that have been defined as headers
- * and are stripped and returned in the &fw_cdev_event_iso_interrupt structure).
- * If more bytes are received, the additional bytes are dropped.  If less bytes
- * are received, the remaining bytes in this part of the payload buffer will not
- * be written to, not even by the next packet.  I.e., packets received in
- * consecutive frames will not necessarily be consecutive in memory.  If an
- * entry has queued multiple packets, the PAYLOAD_LENGTH is divided equally
- * among them.
- *
- * When a packet with the @control.INTERRUPT flag set has been completed, an
- * &fw_cdev_event_iso_interrupt event will be sent.  An entry that has queued
- * multiple receive packets is completed when its last packet is completed.
- *
- * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
- *
- * Here, &fw_cdev_iso_packet would be more aptly named _iso_buffer_chunk since
- * it specifies a chunk of the mmap()'ed buffer, while the number and alignment
- * of packets to be placed into the buffer chunk is not known beforehand.
- *
- * @control.PAYLOAD_LENGTH is the size of the buffer chunk and specifies room
- * for header, payload, padding, and trailer bytes of one or more packets.
- * It must be a multiple of 4.
- *
- * @control.HEADER_LENGTH, TAG and SY are ignored.  SYNC is treated as described
- * for single-channel reception.
- *
- * When a buffer chunk with the @control.INTERRUPT flag set has been filled
- * entirely, an &fw_cdev_event_iso_interrupt_mc event will be sent.
- */
-struct fw_cdev_iso_packet {
-	__u32 control;
-	__u32 header[0];
-};
-
-/**
- * struct fw_cdev_queue_iso - Queue isochronous packets for I/O
- * @packets:	Userspace pointer to an array of &fw_cdev_iso_packet
- * @data:	Pointer into mmap()'ed payload buffer
- * @size:	Size of the @packets array, in bytes
- * @handle:	Isochronous context handle
- *
- * Queue a number of isochronous packets for reception or transmission.
- * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
- * which describe how to transmit from or receive into a contiguous region
- * of a mmap()'ed payload buffer.  As part of transmit packet descriptors,
- * a series of headers can be supplied, which will be prepended to the
- * payload during DMA.
- *
- * The kernel may or may not queue all packets, but will write back updated
- * values of the @packets, @data and @size fields, so the ioctl can be
- * resubmitted easily.
- *
- * In case of a multichannel receive context, @data must be quadlet-aligned
- * relative to the buffer start.
- */
-struct fw_cdev_queue_iso {
-	__u64 packets;
-	__u64 data;
-	__u32 size;
-	__u32 handle;
-};
-
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG0		 1
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG1		 2
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG2		 4
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG3		 8
-#define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS	15
-
-/**
- * struct fw_cdev_start_iso - Start an isochronous transmission or reception
- * @cycle:	Cycle in which to start I/O.  If @cycle is greater than or
- *		equal to 0, the I/O will start on that cycle.
- * @sync:	Determines the value to wait for for receive packets that have
- *		the %FW_CDEV_ISO_SYNC bit set
- * @tags:	Tag filter bit mask.  Only valid for isochronous reception.
- *		Determines the tag values for which packets will be accepted.
- *		Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags.
- * @handle:	Isochronous context handle within which to transmit or receive
- */
-struct fw_cdev_start_iso {
-	__s32 cycle;
-	__u32 sync;
-	__u32 tags;
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception
- * @handle:	Handle of isochronous context to stop
- */
-struct fw_cdev_stop_iso {
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_flush_iso - flush completed iso packets
- * @handle:	handle of isochronous context to flush
- *
- * For %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE contexts,
- * report any completed packets.
- *
- * For %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL contexts, report the current
- * offset in the receive buffer, if it has changed; this is typically in the
- * middle of some buffer chunk.
- *
- * Any %FW_CDEV_EVENT_ISO_INTERRUPT or %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
- * events generated by this ioctl are sent synchronously, i.e., are available
- * for reading from the file descriptor when this ioctl returns.
- */
-struct fw_cdev_flush_iso {
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_get_cycle_timer - read cycle timer register
- * @local_time:   system time, in microseconds since the Epoch
- * @cycle_timer:  Cycle Time register contents
- *
- * Same as %FW_CDEV_IOC_GET_CYCLE_TIMER2, but fixed to use %CLOCK_REALTIME
- * and only with microseconds resolution.
- *
- * In version 1 and 2 of the ABI, this ioctl returned unreliable (non-
- * monotonic) @cycle_timer values on certain controllers.
- */
-struct fw_cdev_get_cycle_timer {
-	__u64 local_time;
-	__u32 cycle_timer;
-};
-
-/**
- * struct fw_cdev_get_cycle_timer2 - read cycle timer register
- * @tv_sec:       system time, seconds
- * @tv_nsec:      system time, sub-seconds part in nanoseconds
- * @clk_id:       input parameter, clock from which to get the system time
- * @cycle_timer:  Cycle Time register contents
- *
- * The %FW_CDEV_IOC_GET_CYCLE_TIMER2 ioctl reads the isochronous cycle timer
- * and also the system clock.  This allows to correlate reception time of
- * isochronous packets with system time.
- *
- * @clk_id lets you choose a clock like with POSIX' clock_gettime function.
- * Supported @clk_id values are POSIX' %CLOCK_REALTIME and %CLOCK_MONOTONIC
- * and Linux' %CLOCK_MONOTONIC_RAW.
- *
- * @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and
- * 12 bits cycleOffset, in host byte order.  Cf. the Cycle Time register
- * per IEEE 1394 or Isochronous Cycle Timer register per OHCI-1394.
- */
-struct fw_cdev_get_cycle_timer2 {
-	__s64 tv_sec;
-	__s32 tv_nsec;
-	__s32 clk_id;
-	__u32 cycle_timer;
-};
-
-/**
- * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
- * @closure:	Passed back to userspace in corresponding iso resource events
- * @channels:	Isochronous channels of which one is to be (de)allocated
- * @bandwidth:	Isochronous bandwidth units to be (de)allocated
- * @handle:	Handle to the allocation, written by the kernel (only valid in
- *		case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls)
- *
- * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an
- * isochronous channel and/or of isochronous bandwidth at the isochronous
- * resource manager (IRM).  Only one of the channels specified in @channels is
- * allocated.  An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after
- * communication with the IRM, indicating success or failure in the event data.
- * The kernel will automatically reallocate the resources after bus resets.
- * Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event
- * will be sent.  The kernel will also automatically deallocate the resources
- * when the file descriptor is closed.
- *
- * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate
- * deallocation of resources which were allocated as described above.
- * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
- *
- * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation
- * without automatic re- or deallocation.
- * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation,
- * indicating success or failure in its data.
- *
- * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like
- * %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed
- * instead of allocated.
- * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
- *
- * To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources
- * for the lifetime of the fd or @handle.
- * In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources
- * for the duration of a bus generation.
- *
- * @channels is a host-endian bitfield with the least significant bit
- * representing channel 0 and the most significant bit representing channel 63:
- * 1ULL << c for each channel c that is a candidate for (de)allocation.
- *
- * @bandwidth is expressed in bandwidth allocation units, i.e. the time to send
- * one quadlet of data (payload or header data) at speed S1600.
- */
-struct fw_cdev_allocate_iso_resource {
-	__u64 closure;
-	__u64 channels;
-	__u32 bandwidth;
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_send_stream_packet - send an asynchronous stream packet
- * @length:	Length of outgoing payload, in bytes
- * @tag:	Data format tag
- * @channel:	Isochronous channel to transmit to
- * @sy:		Synchronization code
- * @closure:	Passed back to userspace in the response event
- * @data:	Userspace pointer to payload
- * @generation:	The bus generation where packet is valid
- * @speed:	Speed to transmit at
- *
- * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet
- * to every device which is listening to the specified channel.  The kernel
- * writes an &fw_cdev_event_response event which indicates success or failure of
- * the transmission.
- */
-struct fw_cdev_send_stream_packet {
-	__u32 length;
-	__u32 tag;
-	__u32 channel;
-	__u32 sy;
-	__u64 closure;
-	__u64 data;
-	__u32 generation;
-	__u32 speed;
-};
-
-/**
- * struct fw_cdev_send_phy_packet - send a PHY packet
- * @closure:	Passed back to userspace in the PHY-packet-sent event
- * @data:	First and second quadlet of the PHY packet
- * @generation:	The bus generation where packet is valid
- *
- * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes
- * on the same card as this device.  After transmission, an
- * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated.
- *
- * The payload @data[] shall be specified in host byte order.  Usually,
- * @data[1] needs to be the bitwise inverse of @data[0].  VersaPHY packets
- * are an exception to this rule.
- *
- * The ioctl is only permitted on device files which represent a local node.
- */
-struct fw_cdev_send_phy_packet {
-	__u64 closure;
-	__u32 data[2];
-	__u32 generation;
-};
-
-/**
- * struct fw_cdev_receive_phy_packets - start reception of PHY packets
- * @closure: Passed back to userspace in phy packet events
- *
- * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to
- * incoming PHY packets from any node on the same bus as the device.
- *
- * The ioctl is only permitted on device files which represent a local node.
- */
-struct fw_cdev_receive_phy_packets {
-	__u64 closure;
-};
-
-#define FW_CDEV_VERSION 3 /* Meaningless legacy macro; don't use it. */
-
-#endif /* _LINUX_FIREWIRE_CDEV_H */
diff --git a/include/linux/firewire-constants.h b/include/linux/firewire-constants.h
deleted file mode 100644
index 9b4bb5fbba4b..000000000000
--- a/include/linux/firewire-constants.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * IEEE 1394 constants.
- *
- * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- */
-
-#ifndef _LINUX_FIREWIRE_CONSTANTS_H
-#define _LINUX_FIREWIRE_CONSTANTS_H
-
-#define TCODE_WRITE_QUADLET_REQUEST	0x0
-#define TCODE_WRITE_BLOCK_REQUEST	0x1
-#define TCODE_WRITE_RESPONSE		0x2
-#define TCODE_READ_QUADLET_REQUEST	0x4
-#define TCODE_READ_BLOCK_REQUEST	0x5
-#define TCODE_READ_QUADLET_RESPONSE	0x6
-#define TCODE_READ_BLOCK_RESPONSE	0x7
-#define TCODE_CYCLE_START		0x8
-#define TCODE_LOCK_REQUEST		0x9
-#define TCODE_STREAM_DATA		0xa
-#define TCODE_LOCK_RESPONSE		0xb
-
-#define EXTCODE_MASK_SWAP		0x1
-#define EXTCODE_COMPARE_SWAP		0x2
-#define EXTCODE_FETCH_ADD		0x3
-#define EXTCODE_LITTLE_ADD		0x4
-#define EXTCODE_BOUNDED_ADD		0x5
-#define EXTCODE_WRAP_ADD		0x6
-#define EXTCODE_VENDOR_DEPENDENT	0x7
-
-/* Linux firewire-core (Juju) specific tcodes */
-#define TCODE_LOCK_MASK_SWAP		(0x10 | EXTCODE_MASK_SWAP)
-#define TCODE_LOCK_COMPARE_SWAP		(0x10 | EXTCODE_COMPARE_SWAP)
-#define TCODE_LOCK_FETCH_ADD		(0x10 | EXTCODE_FETCH_ADD)
-#define TCODE_LOCK_LITTLE_ADD		(0x10 | EXTCODE_LITTLE_ADD)
-#define TCODE_LOCK_BOUNDED_ADD		(0x10 | EXTCODE_BOUNDED_ADD)
-#define TCODE_LOCK_WRAP_ADD		(0x10 | EXTCODE_WRAP_ADD)
-#define TCODE_LOCK_VENDOR_DEPENDENT	(0x10 | EXTCODE_VENDOR_DEPENDENT)
-
-#define RCODE_COMPLETE			0x0
-#define RCODE_CONFLICT_ERROR		0x4
-#define RCODE_DATA_ERROR		0x5
-#define RCODE_TYPE_ERROR		0x6
-#define RCODE_ADDRESS_ERROR		0x7
-
-/* Linux firewire-core (Juju) specific rcodes */
-#define RCODE_SEND_ERROR		0x10
-#define RCODE_CANCELLED			0x11
-#define RCODE_BUSY			0x12
-#define RCODE_GENERATION		0x13
-#define RCODE_NO_ACK			0x14
-
-#define SCODE_100			0x0
-#define SCODE_200			0x1
-#define SCODE_400			0x2
-#define SCODE_800			0x3
-#define SCODE_1600			0x4
-#define SCODE_3200			0x5
-#define SCODE_BETA			0x3
-
-#define ACK_COMPLETE			0x1
-#define ACK_PENDING			0x2
-#define ACK_BUSY_X			0x4
-#define ACK_BUSY_A			0x5
-#define ACK_BUSY_B			0x6
-#define ACK_DATA_ERROR			0xd
-#define ACK_TYPE_ERROR			0xe
-
-#define RETRY_1				0x00
-#define RETRY_X				0x01
-#define RETRY_A				0x02
-#define RETRY_B				0x03
-
-#endif /* _LINUX_FIREWIRE_CONSTANTS_H */
diff --git a/include/linux/flat.h b/include/linux/flat.h
index ec56852e2659..2c1eb15c4ba4 100644
--- a/include/linux/flat.h
+++ b/include/linux/flat.h
@@ -6,58 +6,12 @@
  * This file provides the definitions and structures needed to
  * support uClinux flat-format executables.
  */
-
 #ifndef _LINUX_FLAT_H
 #define _LINUX_FLAT_H
 
-#ifdef __KERNEL__
 #include <asm/flat.h>
-#endif
-
-#define	FLAT_VERSION			0x00000004L
-
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-#define	MAX_SHARED_LIBS			(4)
-#else
-#define	MAX_SHARED_LIBS			(1)
-#endif
-
-/*
- * To make everything easier to port and manage cross platform
- * development,  all fields are in network byte order.
- */
+#include <uapi/linux/flat.h>
 
-struct flat_hdr {
-	char magic[4];
-	unsigned long rev;          /* version (as above) */
-	unsigned long entry;        /* Offset of first executable instruction
-	                               with text segment from beginning of file */
-	unsigned long data_start;   /* Offset of data segment from beginning of
-	                               file */
-	unsigned long data_end;     /* Offset of end of data segment
-	                               from beginning of file */
-	unsigned long bss_end;      /* Offset of end of bss segment from beginning
-	                               of file */
-
-	/* (It is assumed that data_end through bss_end forms the bss segment.) */
-
-	unsigned long stack_size;   /* Size of stack, in bytes */
-	unsigned long reloc_start;  /* Offset of relocation records from
-	                               beginning of file */
-	unsigned long reloc_count;  /* Number of relocation records */
-	unsigned long flags;       
-	unsigned long build_date;   /* When the program/library was built */
-	unsigned long filler[5];    /* Reservered, set to zero */
-};
-
-#define FLAT_FLAG_RAM    0x0001 /* load program entirely into RAM */
-#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
-#define FLAT_FLAG_GZIP   0x0004 /* all but the header is compressed */
-#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
-#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
-
-
-#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */
 /*
  * While it would be nice to keep this header clean,  users of older
  * tools still need this support in the kernel.  So this section is
@@ -95,6 +49,4 @@ typedef union {
 	} reloc;
 } flat_v2_reloc_t;
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_FLAT_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 8cb86cfc9719..001c7cff2d48 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1,337 +1,6 @@
 #ifndef _LINUX_FS_H
 #define _LINUX_FS_H
 
-/*
- * This file has definitions for some important file table
- * structures etc.
- */
-
-#include <linux/limits.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/*
- * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
- * the file limit at runtime and only root can increase the per-process
- * nr_file rlimit, so it's safe to set up a ridiculously high absolute
- * upper limit on files-per-process.
- *
- * Some programs (notably those using select()) may have to be 
- * recompiled to take full advantage of the new limits..  
- */
-
-/* Fixed constants first: */
-#undef NR_OPEN
-#define INR_OPEN_CUR 1024	/* Initial setting for nfile rlimits */
-#define INR_OPEN_MAX 4096	/* Hard limit for nfile rlimits */
-
-#define BLOCK_SIZE_BITS 10
-#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
-
-#define SEEK_SET	0	/* seek relative to beginning of file */
-#define SEEK_CUR	1	/* seek relative to current file position */
-#define SEEK_END	2	/* seek relative to end of file */
-#define SEEK_DATA	3	/* seek to the next data */
-#define SEEK_HOLE	4	/* seek to the next hole */
-#define SEEK_MAX	SEEK_HOLE
-
-struct fstrim_range {
-	__u64 start;
-	__u64 len;
-	__u64 minlen;
-};
-
-/* And dynamically-tunable limits and defaults: */
-struct files_stat_struct {
-	unsigned long nr_files;		/* read only */
-	unsigned long nr_free_files;	/* read only */
-	unsigned long max_files;		/* tunable */
-};
-
-struct inodes_stat_t {
-	int nr_inodes;
-	int nr_unused;
-	int dummy[5];		/* padding for sysctl ABI compatibility */
-};
-
-
-#define NR_FILE  8192	/* this can well be larger on a larger system */
-
-#define MAY_EXEC		0x00000001
-#define MAY_WRITE		0x00000002
-#define MAY_READ		0x00000004
-#define MAY_APPEND		0x00000008
-#define MAY_ACCESS		0x00000010
-#define MAY_OPEN		0x00000020
-#define MAY_CHDIR		0x00000040
-/* called from RCU mode, don't block */
-#define MAY_NOT_BLOCK		0x00000080
-
-/*
- * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
- * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
- */
-
-/* file is open for reading */
-#define FMODE_READ		((__force fmode_t)0x1)
-/* file is open for writing */
-#define FMODE_WRITE		((__force fmode_t)0x2)
-/* file is seekable */
-#define FMODE_LSEEK		((__force fmode_t)0x4)
-/* file can be accessed using pread */
-#define FMODE_PREAD		((__force fmode_t)0x8)
-/* file can be accessed using pwrite */
-#define FMODE_PWRITE		((__force fmode_t)0x10)
-/* File is opened for execution with sys_execve / sys_uselib */
-#define FMODE_EXEC		((__force fmode_t)0x20)
-/* File is opened with O_NDELAY (only set for block devices) */
-#define FMODE_NDELAY		((__force fmode_t)0x40)
-/* File is opened with O_EXCL (only set for block devices) */
-#define FMODE_EXCL		((__force fmode_t)0x80)
-/* File is opened using open(.., 3, ..) and is writeable only for ioctls
-   (specialy hack for floppy.c) */
-#define FMODE_WRITE_IOCTL	((__force fmode_t)0x100)
-/* 32bit hashes as llseek() offset (for directories) */
-#define FMODE_32BITHASH         ((__force fmode_t)0x200)
-/* 64bit hashes as llseek() offset (for directories) */
-#define FMODE_64BITHASH         ((__force fmode_t)0x400)
-
-/*
- * Don't update ctime and mtime.
- *
- * Currently a special hack for the XFS open_by_handle ioctl, but we'll
- * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
- */
-#define FMODE_NOCMTIME		((__force fmode_t)0x800)
-
-/* Expect random access pattern */
-#define FMODE_RANDOM		((__force fmode_t)0x1000)
-
-/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
-#define FMODE_UNSIGNED_OFFSET	((__force fmode_t)0x2000)
-
-/* File is opened with O_PATH; almost nothing can be done with it */
-#define FMODE_PATH		((__force fmode_t)0x4000)
-
-/* File was opened by fanotify and shouldn't generate fanotify events */
-#define FMODE_NONOTIFY		((__force fmode_t)0x1000000)
-
-/*
- * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
- * that indicates that they should check the contents of the iovec are
- * valid, but not check the memory that the iovec elements
- * points too.
- */
-#define CHECK_IOVEC_ONLY -1
-
-#define SEL_IN		1
-#define SEL_OUT		2
-#define SEL_EX		4
-
-/* public flags for file_system_type */
-#define FS_REQUIRES_DEV 1 
-#define FS_BINARY_MOUNTDATA 2
-#define FS_HAS_SUBTYPE 4
-#define FS_REVAL_DOT	16384	/* Check the paths ".", ".." for staleness */
-#define FS_RENAME_DOES_D_MOVE	32768	/* FS will handle d_move()
-					 * during rename() internally.
-					 */
-
-/*
- * These are the fs-independent mount-flags: up to 32 flags are supported
- */
-#define MS_RDONLY	 1	/* Mount read-only */
-#define MS_NOSUID	 2	/* Ignore suid and sgid bits */
-#define MS_NODEV	 4	/* Disallow access to device special files */
-#define MS_NOEXEC	 8	/* Disallow program execution */
-#define MS_SYNCHRONOUS	16	/* Writes are synced at once */
-#define MS_REMOUNT	32	/* Alter flags of a mounted FS */
-#define MS_MANDLOCK	64	/* Allow mandatory locks on an FS */
-#define MS_DIRSYNC	128	/* Directory modifications are synchronous */
-#define MS_NOATIME	1024	/* Do not update access times. */
-#define MS_NODIRATIME	2048	/* Do not update directory access times */
-#define MS_BIND		4096
-#define MS_MOVE		8192
-#define MS_REC		16384
-#define MS_VERBOSE	32768	/* War is peace. Verbosity is silence.
-				   MS_VERBOSE is deprecated. */
-#define MS_SILENT	32768
-#define MS_POSIXACL	(1<<16)	/* VFS does not apply the umask */
-#define MS_UNBINDABLE	(1<<17)	/* change to unbindable */
-#define MS_PRIVATE	(1<<18)	/* change to private */
-#define MS_SLAVE	(1<<19)	/* change to slave */
-#define MS_SHARED	(1<<20)	/* change to shared */
-#define MS_RELATIME	(1<<21)	/* Update atime relative to mtime/ctime. */
-#define MS_KERNMOUNT	(1<<22) /* this is a kern_mount call */
-#define MS_I_VERSION	(1<<23) /* Update inode I_version field */
-#define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
-#define MS_NOSEC	(1<<28)
-#define MS_BORN		(1<<29)
-#define MS_ACTIVE	(1<<30)
-#define MS_NOUSER	(1<<31)
-
-/*
- * Superblock flags that can be altered by MS_REMOUNT
- */
-#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
-
-/*
- * Old magic mount flag and mask
- */
-#define MS_MGC_VAL 0xC0ED0000
-#define MS_MGC_MSK 0xffff0000
-
-/* Inode flags - they have nothing to superblock flags now */
-
-#define S_SYNC		1	/* Writes are synced at once */
-#define S_NOATIME	2	/* Do not update access times */
-#define S_APPEND	4	/* Append-only file */
-#define S_IMMUTABLE	8	/* Immutable file */
-#define S_DEAD		16	/* removed, but still open directory */
-#define S_NOQUOTA	32	/* Inode is not counted to quota */
-#define S_DIRSYNC	64	/* Directory modifications are synchronous */
-#define S_NOCMTIME	128	/* Do not update file c/mtime */
-#define S_SWAPFILE	256	/* Do not truncate: swapon got its bmaps */
-#define S_PRIVATE	512	/* Inode is fs-internal */
-#define S_IMA		1024	/* Inode has an associated IMA struct */
-#define S_AUTOMOUNT	2048	/* Automount/referral quasi-directory */
-#define S_NOSEC		4096	/* no suid or xattr security attributes */
-
-/*
- * Note that nosuid etc flags are inode-specific: setting some file-system
- * flags just means all the inodes inherit those flags by default. It might be
- * possible to override it selectively if you really wanted to with some
- * ioctl() that is not currently implemented.
- *
- * Exception: MS_RDONLY is always applied to the entire file system.
- *
- * Unfortunately, it is possible to change a filesystems flags with it mounted
- * with files in use.  This means that all of the inodes will not have their
- * i_flags updated.  Hence, i_flags no longer inherit the superblock mount
- * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
- */
-#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
-
-#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
-#define IS_SYNC(inode)		(__IS_FLG(inode, MS_SYNCHRONOUS) || \
-					((inode)->i_flags & S_SYNC))
-#define IS_DIRSYNC(inode)	(__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
-					((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
-#define IS_MANDLOCK(inode)	__IS_FLG(inode, MS_MANDLOCK)
-#define IS_NOATIME(inode)   __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
-#define IS_I_VERSION(inode)   __IS_FLG(inode, MS_I_VERSION)
-
-#define IS_NOQUOTA(inode)	((inode)->i_flags & S_NOQUOTA)
-#define IS_APPEND(inode)	((inode)->i_flags & S_APPEND)
-#define IS_IMMUTABLE(inode)	((inode)->i_flags & S_IMMUTABLE)
-#define IS_POSIXACL(inode)	__IS_FLG(inode, MS_POSIXACL)
-
-#define IS_DEADDIR(inode)	((inode)->i_flags & S_DEAD)
-#define IS_NOCMTIME(inode)	((inode)->i_flags & S_NOCMTIME)
-#define IS_SWAPFILE(inode)	((inode)->i_flags & S_SWAPFILE)
-#define IS_PRIVATE(inode)	((inode)->i_flags & S_PRIVATE)
-#define IS_IMA(inode)		((inode)->i_flags & S_IMA)
-#define IS_AUTOMOUNT(inode)	((inode)->i_flags & S_AUTOMOUNT)
-#define IS_NOSEC(inode)		((inode)->i_flags & S_NOSEC)
-
-/* the read-only stuff doesn't really belong here, but any other place is
-   probably as bad and I don't want to create yet another include file. */
-
-#define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */
-#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */
-#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */
-#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */
-#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */
-#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */
-#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */
-#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
-#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
-#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
-#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
-#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
-#if 0
-#define BLKPG      _IO(0x12,105)/* See blkpg.h */
-
-/* Some people are morons.  Do not use sizeof! */
-
-#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
-#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
-/* This was here just to show that the number is taken -
-   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
-#endif
-/* A jump here: 108-111 have been used for various private purposes. */
-#define BLKBSZGET  _IOR(0x12,112,size_t)
-#define BLKBSZSET  _IOW(0x12,113,size_t)
-#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */
-#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
-#define BLKTRACESTART _IO(0x12,116)
-#define BLKTRACESTOP _IO(0x12,117)
-#define BLKTRACETEARDOWN _IO(0x12,118)
-#define BLKDISCARD _IO(0x12,119)
-#define BLKIOMIN _IO(0x12,120)
-#define BLKIOOPT _IO(0x12,121)
-#define BLKALIGNOFF _IO(0x12,122)
-#define BLKPBSZGET _IO(0x12,123)
-#define BLKDISCARDZEROES _IO(0x12,124)
-#define BLKSECDISCARD _IO(0x12,125)
-#define BLKROTATIONAL _IO(0x12,126)
-#define BLKZEROOUT _IO(0x12,127)
-
-#define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
-#define FIBMAP	   _IO(0x00,1)	/* bmap access */
-#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
-#define FIFREEZE	_IOWR('X', 119, int)	/* Freeze */
-#define FITHAW		_IOWR('X', 120, int)	/* Thaw */
-#define FITRIM		_IOWR('X', 121, struct fstrim_range)	/* Trim */
-
-#define	FS_IOC_GETFLAGS			_IOR('f', 1, long)
-#define	FS_IOC_SETFLAGS			_IOW('f', 2, long)
-#define	FS_IOC_GETVERSION		_IOR('v', 1, long)
-#define	FS_IOC_SETVERSION		_IOW('v', 2, long)
-#define FS_IOC_FIEMAP			_IOWR('f', 11, struct fiemap)
-#define FS_IOC32_GETFLAGS		_IOR('f', 1, int)
-#define FS_IOC32_SETFLAGS		_IOW('f', 2, int)
-#define FS_IOC32_GETVERSION		_IOR('v', 1, int)
-#define FS_IOC32_SETVERSION		_IOW('v', 2, int)
-
-/*
- * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
- */
-#define	FS_SECRM_FL			0x00000001 /* Secure deletion */
-#define	FS_UNRM_FL			0x00000002 /* Undelete */
-#define	FS_COMPR_FL			0x00000004 /* Compress file */
-#define FS_SYNC_FL			0x00000008 /* Synchronous updates */
-#define FS_IMMUTABLE_FL			0x00000010 /* Immutable file */
-#define FS_APPEND_FL			0x00000020 /* writes to file may only append */
-#define FS_NODUMP_FL			0x00000040 /* do not dump file */
-#define FS_NOATIME_FL			0x00000080 /* do not update atime */
-/* Reserved for compression usage... */
-#define FS_DIRTY_FL			0x00000100
-#define FS_COMPRBLK_FL			0x00000200 /* One or more compressed clusters */
-#define FS_NOCOMP_FL			0x00000400 /* Don't compress */
-#define FS_ECOMPR_FL			0x00000800 /* Compression error */
-/* End compression flags --- maybe not all used */
-#define FS_BTREE_FL			0x00001000 /* btree format dir */
-#define FS_INDEX_FL			0x00001000 /* hash-indexed directory */
-#define FS_IMAGIC_FL			0x00002000 /* AFS directory */
-#define FS_JOURNAL_DATA_FL		0x00004000 /* Reserved for ext3 */
-#define FS_NOTAIL_FL			0x00008000 /* file tail should not be merged */
-#define FS_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */
-#define FS_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
-#define FS_EXTENT_FL			0x00080000 /* Extents */
-#define FS_DIRECTIO_FL			0x00100000 /* Use direct i/o */
-#define FS_NOCOW_FL			0x00800000 /* Do not cow file */
-#define FS_RESERVED_FL			0x80000000 /* reserved for ext2 lib */
-
-#define FS_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
-#define FS_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */
-
-
-#define SYNC_FILE_RANGE_WAIT_BEFORE	1
-#define SYNC_FILE_RANGE_WRITE		2
-#define SYNC_FILE_RANGE_WAIT_AFTER	4
-
-#ifdef __KERNEL__
 
 #include <linux/linkage.h>
 #include <linux/wait.h>
@@ -360,6 +29,7 @@ struct inodes_stat_t {
 #include <linux/blk_types.h>
 
 #include <asm/byteorder.h>
+#include <uapi/linux/fs.h>
 
 struct export_operations;
 struct hd_geometry;
@@ -2876,5 +2546,4 @@ static inline void inode_has_no_xattr(struct inode *inode)
 		inode->i_flags |= S_NOSEC;
 }
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_FS_H */
diff --git a/include/linux/fsl_hypervisor.h b/include/linux/fsl_hypervisor.h
index 1cebaeeeef57..2a707d7fb32c 100644
--- a/include/linux/fsl_hypervisor.h
+++ b/include/linux/fsl_hypervisor.h
@@ -36,187 +36,11 @@
  * also be included by applications that need to communicate with the driver
  * via the ioctl interface.
  */
-
 #ifndef FSL_HYPERVISOR_H
 #define FSL_HYPERVISOR_H
 
-#include <linux/types.h>
-
-/**
- * struct fsl_hv_ioctl_restart - restart a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to restart, or -1 for the
- *             calling partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_RESTART
- */
-struct fsl_hv_ioctl_restart {
-	__u32 ret;
-	__u32 partition;
-};
+#include <uapi/linux/fsl_hypervisor.h>
 
-/**
- * struct fsl_hv_ioctl_status - get a partition's status
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to query, or -1 for the
- *             calling partition
- * @status: The returned status of the partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS
- *
- * Values of 'status':
- *    0 = Stopped
- *    1 = Running
- *    2 = Starting
- *    3 = Stopping
- */
-struct fsl_hv_ioctl_status {
-	__u32 ret;
-	__u32 partition;
-	__u32 status;
-};
-
-/**
- * struct fsl_hv_ioctl_start - start a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to control
- * @entry_point: The offset within the guest IMA to start execution
- * @load: If non-zero, reload the partition's images before starting
- *
- * Used by FSL_HV_IOCTL_PARTITION_START
- */
-struct fsl_hv_ioctl_start {
-	__u32 ret;
-	__u32 partition;
-	__u32 entry_point;
-	__u32 load;
-};
-
-/**
- * struct fsl_hv_ioctl_stop - stop a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to stop, or -1 for the calling
- *             partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_STOP
- */
-struct fsl_hv_ioctl_stop {
-	__u32 ret;
-	__u32 partition;
-};
-
-/**
- * struct fsl_hv_ioctl_memcpy - copy memory between partitions
- * @ret: return error code from the hypervisor
- * @source: the partition ID of the source partition, or -1 for this
- *          partition
- * @target: the partition ID of the target partition, or -1 for this
- *          partition
- * @reserved: reserved, must be set to 0
- * @local_addr: user-space virtual address of a buffer in the local
- *              partition
- * @remote_addr: guest physical address of a buffer in the
- *           remote partition
- * @count: the number of bytes to copy.  Both the local and remote
- *         buffers must be at least 'count' bytes long
- *
- * Used by FSL_HV_IOCTL_MEMCPY
- *
- * The 'local' partition is the partition that calls this ioctl.  The
- * 'remote' partition is a different partition.  The data is copied from
- * the 'source' paritition' to the 'target' partition.
- *
- * The buffer in the remote partition must be guest physically
- * contiguous.
- *
- * This ioctl does not support copying memory between two remote
- * partitions or within the same partition, so either 'source' or
- * 'target' (but not both) must be -1.  In other words, either
- *
- *      source == local and target == remote
- * or
- *      source == remote and target == local
- */
-struct fsl_hv_ioctl_memcpy {
-	__u32 ret;
-	__u32 source;
-	__u32 target;
-	__u32 reserved;	/* padding to ensure local_vaddr is aligned */
-	__u64 local_vaddr;
-	__u64 remote_paddr;
-	__u64 count;
-};
-
-/**
- * struct fsl_hv_ioctl_doorbell - ring a doorbell
- * @ret: return error code from the hypervisor
- * @doorbell: the handle of the doorbell to ring doorbell
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_doorbell {
-	__u32 ret;
-	__u32 doorbell;
-};
-
-/**
- * struct fsl_hv_ioctl_prop - get/set a device tree property
- * @ret: return error code from the hypervisor
- * @handle: handle of partition whose tree to access
- * @path: virtual address of path name of node to access
- * @propname: virtual address of name of property to access
- * @propval: virtual address of property data buffer
- * @proplen: Size of property data buffer
- * @reserved: reserved, must be set to 0
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_prop {
-	__u32 ret;
-	__u32 handle;
-	__u64 path;
-	__u64 propname;
-	__u64 propval;
-	__u32 proplen;
-	__u32 reserved;	/* padding to ensure structure is aligned */
-};
-
-/* The ioctl type, documented in ioctl-number.txt */
-#define FSL_HV_IOCTL_TYPE	0xAF
-
-/* Restart another partition */
-#define FSL_HV_IOCTL_PARTITION_RESTART \
-	_IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart)
-
-/* Get a partition's status */
-#define FSL_HV_IOCTL_PARTITION_GET_STATUS \
-	_IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status)
-
-/* Boot another partition */
-#define FSL_HV_IOCTL_PARTITION_START \
-	_IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start)
-
-/* Stop this or another partition */
-#define FSL_HV_IOCTL_PARTITION_STOP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop)
-
-/* Copy data from one partition to another */
-#define FSL_HV_IOCTL_MEMCPY \
-	_IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy)
-
-/* Ring a doorbell */
-#define FSL_HV_IOCTL_DOORBELL \
-	_IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell)
-
-/* Get a property from another guest's device tree */
-#define FSL_HV_IOCTL_GETPROP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop)
-
-/* Set a property in another guest's device tree */
-#define FSL_HV_IOCTL_SETPROP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop)
-
-#ifdef __KERNEL__
 
 /**
  * fsl_hv_event_register() - register a callback for failover events
@@ -237,5 +61,3 @@ int fsl_hv_failover_register(struct notifier_block *nb);
 int fsl_hv_failover_unregister(struct notifier_block *nb);
 
 #endif
-
-#endif
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
deleted file mode 100644
index d8c713e148e3..000000000000
--- a/include/linux/fuse.h
+++ /dev/null
@@ -1,677 +0,0 @@
-/*
-    FUSE: Filesystem in Userspace
-    Copyright (C) 2001-2008  Miklos Szeredi <miklos@szeredi.hu>
-
-    This program can be distributed under the terms of the GNU GPL.
-    See the file COPYING.
-*/
-
-/*
- * This file defines the kernel interface of FUSE
- *
- * Protocol changelog:
- *
- * 7.9:
- *  - new fuse_getattr_in input argument of GETATTR
- *  - add lk_flags in fuse_lk_in
- *  - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in
- *  - add blksize field to fuse_attr
- *  - add file flags field to fuse_read_in and fuse_write_in
- *
- * 7.10
- *  - add nonseekable open flag
- *
- * 7.11
- *  - add IOCTL message
- *  - add unsolicited notification support
- *  - add POLL message and NOTIFY_POLL notification
- *
- * 7.12
- *  - add umask flag to input argument of open, mknod and mkdir
- *  - add notification messages for invalidation of inodes and
- *    directory entries
- *
- * 7.13
- *  - make max number of background requests and congestion threshold
- *    tunables
- *
- * 7.14
- *  - add splice support to fuse device
- *
- * 7.15
- *  - add store notify
- *  - add retrieve notify
- *
- * 7.16
- *  - add BATCH_FORGET request
- *  - FUSE_IOCTL_UNRESTRICTED shall now return with array of 'struct
- *    fuse_ioctl_iovec' instead of ambiguous 'struct iovec'
- *  - add FUSE_IOCTL_32BIT flag
- *
- * 7.17
- *  - add FUSE_FLOCK_LOCKS and FUSE_RELEASE_FLOCK_UNLOCK
- *
- * 7.18
- *  - add FUSE_IOCTL_DIR flag
- *  - add FUSE_NOTIFY_DELETE
- *
- * 7.19
- *  - add FUSE_FALLOCATE
- *
- * 7.20
- *  - add FUSE_AUTO_INVAL_DATA
- */
-
-#ifndef _LINUX_FUSE_H
-#define _LINUX_FUSE_H
-
-#include <linux/types.h>
-
-/*
- * Version negotiation:
- *
- * Both the kernel and userspace send the version they support in the
- * INIT request and reply respectively.
- *
- * If the major versions match then both shall use the smallest
- * of the two minor versions for communication.
- *
- * If the kernel supports a larger major version, then userspace shall
- * reply with the major version it supports, ignore the rest of the
- * INIT message and expect a new INIT message from the kernel with a
- * matching major version.
- *
- * If the library supports a larger major version, then it shall fall
- * back to the major protocol version sent by the kernel for
- * communication and reply with that major version (and an arbitrary
- * supported minor version).
- */
-
-/** Version number of this interface */
-#define FUSE_KERNEL_VERSION 7
-
-/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 20
-
-/** The node ID of the root inode */
-#define FUSE_ROOT_ID 1
-
-/* Make sure all structures are padded to 64bit boundary, so 32bit
-   userspace works under 64bit kernels */
-
-struct fuse_attr {
-	__u64	ino;
-	__u64	size;
-	__u64	blocks;
-	__u64	atime;
-	__u64	mtime;
-	__u64	ctime;
-	__u32	atimensec;
-	__u32	mtimensec;
-	__u32	ctimensec;
-	__u32	mode;
-	__u32	nlink;
-	__u32	uid;
-	__u32	gid;
-	__u32	rdev;
-	__u32	blksize;
-	__u32	padding;
-};
-
-struct fuse_kstatfs {
-	__u64	blocks;
-	__u64	bfree;
-	__u64	bavail;
-	__u64	files;
-	__u64	ffree;
-	__u32	bsize;
-	__u32	namelen;
-	__u32	frsize;
-	__u32	padding;
-	__u32	spare[6];
-};
-
-struct fuse_file_lock {
-	__u64	start;
-	__u64	end;
-	__u32	type;
-	__u32	pid; /* tgid */
-};
-
-/**
- * Bitmasks for fuse_setattr_in.valid
- */
-#define FATTR_MODE	(1 << 0)
-#define FATTR_UID	(1 << 1)
-#define FATTR_GID	(1 << 2)
-#define FATTR_SIZE	(1 << 3)
-#define FATTR_ATIME	(1 << 4)
-#define FATTR_MTIME	(1 << 5)
-#define FATTR_FH	(1 << 6)
-#define FATTR_ATIME_NOW	(1 << 7)
-#define FATTR_MTIME_NOW	(1 << 8)
-#define FATTR_LOCKOWNER	(1 << 9)
-
-/**
- * Flags returned by the OPEN request
- *
- * FOPEN_DIRECT_IO: bypass page cache for this open file
- * FOPEN_KEEP_CACHE: don't invalidate the data cache on open
- * FOPEN_NONSEEKABLE: the file is not seekable
- */
-#define FOPEN_DIRECT_IO		(1 << 0)
-#define FOPEN_KEEP_CACHE	(1 << 1)
-#define FOPEN_NONSEEKABLE	(1 << 2)
-
-/**
- * INIT request/reply flags
- *
- * FUSE_ASYNC_READ: asynchronous read requests
- * FUSE_POSIX_LOCKS: remote locking for POSIX file locks
- * FUSE_FILE_OPS: kernel sends file handle for fstat, etc... (not yet supported)
- * FUSE_ATOMIC_O_TRUNC: handles the O_TRUNC open flag in the filesystem
- * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
- * FUSE_BIG_WRITES: filesystem can handle write size larger than 4kB
- * FUSE_DONT_MASK: don't apply umask to file mode on create operations
- * FUSE_SPLICE_WRITE: kernel supports splice write on the device
- * FUSE_SPLICE_MOVE: kernel supports splice move on the device
- * FUSE_SPLICE_READ: kernel supports splice read on the device
- * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks
- * FUSE_HAS_IOCTL_DIR: kernel supports ioctl on directories
- * FUSE_AUTO_INVAL_DATA: automatically invalidate cached pages
- */
-#define FUSE_ASYNC_READ		(1 << 0)
-#define FUSE_POSIX_LOCKS	(1 << 1)
-#define FUSE_FILE_OPS		(1 << 2)
-#define FUSE_ATOMIC_O_TRUNC	(1 << 3)
-#define FUSE_EXPORT_SUPPORT	(1 << 4)
-#define FUSE_BIG_WRITES		(1 << 5)
-#define FUSE_DONT_MASK		(1 << 6)
-#define FUSE_SPLICE_WRITE	(1 << 7)
-#define FUSE_SPLICE_MOVE	(1 << 8)
-#define FUSE_SPLICE_READ	(1 << 9)
-#define FUSE_FLOCK_LOCKS	(1 << 10)
-#define FUSE_HAS_IOCTL_DIR	(1 << 11)
-#define FUSE_AUTO_INVAL_DATA	(1 << 12)
-
-/**
- * CUSE INIT request/reply flags
- *
- * CUSE_UNRESTRICTED_IOCTL:  use unrestricted ioctl
- */
-#define CUSE_UNRESTRICTED_IOCTL	(1 << 0)
-
-/**
- * Release flags
- */
-#define FUSE_RELEASE_FLUSH	(1 << 0)
-#define FUSE_RELEASE_FLOCK_UNLOCK	(1 << 1)
-
-/**
- * Getattr flags
- */
-#define FUSE_GETATTR_FH		(1 << 0)
-
-/**
- * Lock flags
- */
-#define FUSE_LK_FLOCK		(1 << 0)
-
-/**
- * WRITE flags
- *
- * FUSE_WRITE_CACHE: delayed write from page cache, file handle is guessed
- * FUSE_WRITE_LOCKOWNER: lock_owner field is valid
- */
-#define FUSE_WRITE_CACHE	(1 << 0)
-#define FUSE_WRITE_LOCKOWNER	(1 << 1)
-
-/**
- * Read flags
- */
-#define FUSE_READ_LOCKOWNER	(1 << 1)
-
-/**
- * Ioctl flags
- *
- * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine
- * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed
- * FUSE_IOCTL_RETRY: retry with new iovecs
- * FUSE_IOCTL_32BIT: 32bit ioctl
- * FUSE_IOCTL_DIR: is a directory
- *
- * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs
- */
-#define FUSE_IOCTL_COMPAT	(1 << 0)
-#define FUSE_IOCTL_UNRESTRICTED	(1 << 1)
-#define FUSE_IOCTL_RETRY	(1 << 2)
-#define FUSE_IOCTL_32BIT	(1 << 3)
-#define FUSE_IOCTL_DIR		(1 << 4)
-
-#define FUSE_IOCTL_MAX_IOV	256
-
-/**
- * Poll flags
- *
- * FUSE_POLL_SCHEDULE_NOTIFY: request poll notify
- */
-#define FUSE_POLL_SCHEDULE_NOTIFY (1 << 0)
-
-enum fuse_opcode {
-	FUSE_LOOKUP	   = 1,
-	FUSE_FORGET	   = 2,  /* no reply */
-	FUSE_GETATTR	   = 3,
-	FUSE_SETATTR	   = 4,
-	FUSE_READLINK	   = 5,
-	FUSE_SYMLINK	   = 6,
-	FUSE_MKNOD	   = 8,
-	FUSE_MKDIR	   = 9,
-	FUSE_UNLINK	   = 10,
-	FUSE_RMDIR	   = 11,
-	FUSE_RENAME	   = 12,
-	FUSE_LINK	   = 13,
-	FUSE_OPEN	   = 14,
-	FUSE_READ	   = 15,
-	FUSE_WRITE	   = 16,
-	FUSE_STATFS	   = 17,
-	FUSE_RELEASE       = 18,
-	FUSE_FSYNC         = 20,
-	FUSE_SETXATTR      = 21,
-	FUSE_GETXATTR      = 22,
-	FUSE_LISTXATTR     = 23,
-	FUSE_REMOVEXATTR   = 24,
-	FUSE_FLUSH         = 25,
-	FUSE_INIT          = 26,
-	FUSE_OPENDIR       = 27,
-	FUSE_READDIR       = 28,
-	FUSE_RELEASEDIR    = 29,
-	FUSE_FSYNCDIR      = 30,
-	FUSE_GETLK         = 31,
-	FUSE_SETLK         = 32,
-	FUSE_SETLKW        = 33,
-	FUSE_ACCESS        = 34,
-	FUSE_CREATE        = 35,
-	FUSE_INTERRUPT     = 36,
-	FUSE_BMAP          = 37,
-	FUSE_DESTROY       = 38,
-	FUSE_IOCTL         = 39,
-	FUSE_POLL          = 40,
-	FUSE_NOTIFY_REPLY  = 41,
-	FUSE_BATCH_FORGET  = 42,
-	FUSE_FALLOCATE     = 43,
-
-	/* CUSE specific operations */
-	CUSE_INIT          = 4096,
-};
-
-enum fuse_notify_code {
-	FUSE_NOTIFY_POLL   = 1,
-	FUSE_NOTIFY_INVAL_INODE = 2,
-	FUSE_NOTIFY_INVAL_ENTRY = 3,
-	FUSE_NOTIFY_STORE = 4,
-	FUSE_NOTIFY_RETRIEVE = 5,
-	FUSE_NOTIFY_DELETE = 6,
-	FUSE_NOTIFY_CODE_MAX,
-};
-
-/* The read buffer is required to be at least 8k, but may be much larger */
-#define FUSE_MIN_READ_BUFFER 8192
-
-#define FUSE_COMPAT_ENTRY_OUT_SIZE 120
-
-struct fuse_entry_out {
-	__u64	nodeid;		/* Inode ID */
-	__u64	generation;	/* Inode generation: nodeid:gen must
-				   be unique for the fs's lifetime */
-	__u64	entry_valid;	/* Cache timeout for the name */
-	__u64	attr_valid;	/* Cache timeout for the attributes */
-	__u32	entry_valid_nsec;
-	__u32	attr_valid_nsec;
-	struct fuse_attr attr;
-};
-
-struct fuse_forget_in {
-	__u64	nlookup;
-};
-
-struct fuse_forget_one {
-	__u64	nodeid;
-	__u64	nlookup;
-};
-
-struct fuse_batch_forget_in {
-	__u32	count;
-	__u32	dummy;
-};
-
-struct fuse_getattr_in {
-	__u32	getattr_flags;
-	__u32	dummy;
-	__u64	fh;
-};
-
-#define FUSE_COMPAT_ATTR_OUT_SIZE 96
-
-struct fuse_attr_out {
-	__u64	attr_valid;	/* Cache timeout for the attributes */
-	__u32	attr_valid_nsec;
-	__u32	dummy;
-	struct fuse_attr attr;
-};
-
-#define FUSE_COMPAT_MKNOD_IN_SIZE 8
-
-struct fuse_mknod_in {
-	__u32	mode;
-	__u32	rdev;
-	__u32	umask;
-	__u32	padding;
-};
-
-struct fuse_mkdir_in {
-	__u32	mode;
-	__u32	umask;
-};
-
-struct fuse_rename_in {
-	__u64	newdir;
-};
-
-struct fuse_link_in {
-	__u64	oldnodeid;
-};
-
-struct fuse_setattr_in {
-	__u32	valid;
-	__u32	padding;
-	__u64	fh;
-	__u64	size;
-	__u64	lock_owner;
-	__u64	atime;
-	__u64	mtime;
-	__u64	unused2;
-	__u32	atimensec;
-	__u32	mtimensec;
-	__u32	unused3;
-	__u32	mode;
-	__u32	unused4;
-	__u32	uid;
-	__u32	gid;
-	__u32	unused5;
-};
-
-struct fuse_open_in {
-	__u32	flags;
-	__u32	unused;
-};
-
-struct fuse_create_in {
-	__u32	flags;
-	__u32	mode;
-	__u32	umask;
-	__u32	padding;
-};
-
-struct fuse_open_out {
-	__u64	fh;
-	__u32	open_flags;
-	__u32	padding;
-};
-
-struct fuse_release_in {
-	__u64	fh;
-	__u32	flags;
-	__u32	release_flags;
-	__u64	lock_owner;
-};
-
-struct fuse_flush_in {
-	__u64	fh;
-	__u32	unused;
-	__u32	padding;
-	__u64	lock_owner;
-};
-
-struct fuse_read_in {
-	__u64	fh;
-	__u64	offset;
-	__u32	size;
-	__u32	read_flags;
-	__u64	lock_owner;
-	__u32	flags;
-	__u32	padding;
-};
-
-#define FUSE_COMPAT_WRITE_IN_SIZE 24
-
-struct fuse_write_in {
-	__u64	fh;
-	__u64	offset;
-	__u32	size;
-	__u32	write_flags;
-	__u64	lock_owner;
-	__u32	flags;
-	__u32	padding;
-};
-
-struct fuse_write_out {
-	__u32	size;
-	__u32	padding;
-};
-
-#define FUSE_COMPAT_STATFS_SIZE 48
-
-struct fuse_statfs_out {
-	struct fuse_kstatfs st;
-};
-
-struct fuse_fsync_in {
-	__u64	fh;
-	__u32	fsync_flags;
-	__u32	padding;
-};
-
-struct fuse_setxattr_in {
-	__u32	size;
-	__u32	flags;
-};
-
-struct fuse_getxattr_in {
-	__u32	size;
-	__u32	padding;
-};
-
-struct fuse_getxattr_out {
-	__u32	size;
-	__u32	padding;
-};
-
-struct fuse_lk_in {
-	__u64	fh;
-	__u64	owner;
-	struct fuse_file_lock lk;
-	__u32	lk_flags;
-	__u32	padding;
-};
-
-struct fuse_lk_out {
-	struct fuse_file_lock lk;
-};
-
-struct fuse_access_in {
-	__u32	mask;
-	__u32	padding;
-};
-
-struct fuse_init_in {
-	__u32	major;
-	__u32	minor;
-	__u32	max_readahead;
-	__u32	flags;
-};
-
-struct fuse_init_out {
-	__u32	major;
-	__u32	minor;
-	__u32	max_readahead;
-	__u32	flags;
-	__u16   max_background;
-	__u16   congestion_threshold;
-	__u32	max_write;
-};
-
-#define CUSE_INIT_INFO_MAX 4096
-
-struct cuse_init_in {
-	__u32	major;
-	__u32	minor;
-	__u32	unused;
-	__u32	flags;
-};
-
-struct cuse_init_out {
-	__u32	major;
-	__u32	minor;
-	__u32	unused;
-	__u32	flags;
-	__u32	max_read;
-	__u32	max_write;
-	__u32	dev_major;		/* chardev major */
-	__u32	dev_minor;		/* chardev minor */
-	__u32	spare[10];
-};
-
-struct fuse_interrupt_in {
-	__u64	unique;
-};
-
-struct fuse_bmap_in {
-	__u64	block;
-	__u32	blocksize;
-	__u32	padding;
-};
-
-struct fuse_bmap_out {
-	__u64	block;
-};
-
-struct fuse_ioctl_in {
-	__u64	fh;
-	__u32	flags;
-	__u32	cmd;
-	__u64	arg;
-	__u32	in_size;
-	__u32	out_size;
-};
-
-struct fuse_ioctl_iovec {
-	__u64	base;
-	__u64	len;
-};
-
-struct fuse_ioctl_out {
-	__s32	result;
-	__u32	flags;
-	__u32	in_iovs;
-	__u32	out_iovs;
-};
-
-struct fuse_poll_in {
-	__u64	fh;
-	__u64	kh;
-	__u32	flags;
-	__u32   padding;
-};
-
-struct fuse_poll_out {
-	__u32	revents;
-	__u32	padding;
-};
-
-struct fuse_notify_poll_wakeup_out {
-	__u64	kh;
-};
-
-struct fuse_fallocate_in {
-	__u64	fh;
-	__u64	offset;
-	__u64	length;
-	__u32	mode;
-	__u32	padding;
-};
-
-struct fuse_in_header {
-	__u32	len;
-	__u32	opcode;
-	__u64	unique;
-	__u64	nodeid;
-	__u32	uid;
-	__u32	gid;
-	__u32	pid;
-	__u32	padding;
-};
-
-struct fuse_out_header {
-	__u32	len;
-	__s32	error;
-	__u64	unique;
-};
-
-struct fuse_dirent {
-	__u64	ino;
-	__u64	off;
-	__u32	namelen;
-	__u32	type;
-	char name[];
-};
-
-#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
-#define FUSE_DIRENT_ALIGN(x) (((x) + sizeof(__u64) - 1) & ~(sizeof(__u64) - 1))
-#define FUSE_DIRENT_SIZE(d) \
-	FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
-
-struct fuse_notify_inval_inode_out {
-	__u64	ino;
-	__s64	off;
-	__s64	len;
-};
-
-struct fuse_notify_inval_entry_out {
-	__u64	parent;
-	__u32	namelen;
-	__u32	padding;
-};
-
-struct fuse_notify_delete_out {
-	__u64	parent;
-	__u64	child;
-	__u32	namelen;
-	__u32	padding;
-};
-
-struct fuse_notify_store_out {
-	__u64	nodeid;
-	__u64	offset;
-	__u32	size;
-	__u32	padding;
-};
-
-struct fuse_notify_retrieve_out {
-	__u64	notify_unique;
-	__u64	nodeid;
-	__u64	offset;
-	__u32	size;
-	__u32	padding;
-};
-
-/* Matches the size of fuse_write_in */
-struct fuse_notify_retrieve_in {
-	__u64	dummy1;
-	__u64	offset;
-	__u32	size;
-	__u32	dummy2;
-	__u64	dummy3;
-	__u64	dummy4;
-};
-
-#endif /* _LINUX_FUSE_H */
diff --git a/include/linux/futex.h b/include/linux/futex.h
index 1e5a26d79232..b0d95cac826e 100644
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -1,129 +1,8 @@
 #ifndef _LINUX_FUTEX_H
 #define _LINUX_FUTEX_H
 
-#include <linux/compiler.h>
-#include <linux/types.h>
+#include <uapi/linux/futex.h>
 
-/* Second argument to futex syscall */
-
-
-#define FUTEX_WAIT		0
-#define FUTEX_WAKE		1
-#define FUTEX_FD		2
-#define FUTEX_REQUEUE		3
-#define FUTEX_CMP_REQUEUE	4
-#define FUTEX_WAKE_OP		5
-#define FUTEX_LOCK_PI		6
-#define FUTEX_UNLOCK_PI		7
-#define FUTEX_TRYLOCK_PI	8
-#define FUTEX_WAIT_BITSET	9
-#define FUTEX_WAKE_BITSET	10
-#define FUTEX_WAIT_REQUEUE_PI	11
-#define FUTEX_CMP_REQUEUE_PI	12
-
-#define FUTEX_PRIVATE_FLAG	128
-#define FUTEX_CLOCK_REALTIME	256
-#define FUTEX_CMD_MASK		~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
-
-#define FUTEX_WAIT_PRIVATE	(FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_PRIVATE	(FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_REQUEUE_PRIVATE	(FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_OP_PRIVATE	(FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
-#define FUTEX_LOCK_PI_PRIVATE	(FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_UNLOCK_PI_PRIVATE	(FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_BITSET_PRIVATE	(FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_BITSET_PRIVATE	(FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_REQUEUE_PI_PRIVATE	(FUTEX_WAIT_REQUEUE_PI | \
-					 FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PI_PRIVATE	(FUTEX_CMP_REQUEUE_PI | \
-					 FUTEX_PRIVATE_FLAG)
-
-/*
- * Support for robust futexes: the kernel cleans up held futexes at
- * thread exit time.
- */
-
-/*
- * Per-lock list entry - embedded in user-space locks, somewhere close
- * to the futex field. (Note: user-space uses a double-linked list to
- * achieve O(1) list add and remove, but the kernel only needs to know
- * about the forward link)
- *
- * NOTE: this structure is part of the syscall ABI, and must not be
- * changed.
- */
-struct robust_list {
-	struct robust_list __user *next;
-};
-
-/*
- * Per-thread list head:
- *
- * NOTE: this structure is part of the syscall ABI, and must only be
- * changed if the change is first communicated with the glibc folks.
- * (When an incompatible change is done, we'll increase the structure
- *  size, which glibc will detect)
- */
-struct robust_list_head {
-	/*
-	 * The head of the list. Points back to itself if empty:
-	 */
-	struct robust_list list;
-
-	/*
-	 * This relative offset is set by user-space, it gives the kernel
-	 * the relative position of the futex field to examine. This way
-	 * we keep userspace flexible, to freely shape its data-structure,
-	 * without hardcoding any particular offset into the kernel:
-	 */
-	long futex_offset;
-
-	/*
-	 * The death of the thread may race with userspace setting
-	 * up a lock's links. So to handle this race, userspace first
-	 * sets this field to the address of the to-be-taken lock,
-	 * then does the lock acquire, and then adds itself to the
-	 * list, and then clears this field. Hence the kernel will
-	 * always have full knowledge of all locks that the thread
-	 * _might_ have taken. We check the owner TID in any case,
-	 * so only truly owned locks will be handled.
-	 */
-	struct robust_list __user *list_op_pending;
-};
-
-/*
- * Are there any waiters for this robust futex:
- */
-#define FUTEX_WAITERS		0x80000000
-
-/*
- * The kernel signals via this bit that a thread holding a futex
- * has exited without unlocking the futex. The kernel also does
- * a FUTEX_WAKE on such futexes, after setting the bit, to wake
- * up any possible waiters:
- */
-#define FUTEX_OWNER_DIED	0x40000000
-
-/*
- * The rest of the robust-futex field is for the TID:
- */
-#define FUTEX_TID_MASK		0x3fffffff
-
-/*
- * This limit protects against a deliberately circular list.
- * (Not worth introducing an rlimit for it)
- */
-#define ROBUST_LIST_LIMIT	2048
-
-/*
- * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
- * match of any bit.
- */
-#define FUTEX_BITSET_MATCH_ANY	0xffffffff
-
-#ifdef __KERNEL__
 struct inode;
 struct mm_struct;
 struct task_struct;
@@ -185,31 +64,4 @@ static inline void exit_pi_state_list(struct task_struct *curr)
 {
 }
 #endif
-#endif /* __KERNEL__ */
-
-#define FUTEX_OP_SET		0	/* *(int *)UADDR2 = OPARG; */
-#define FUTEX_OP_ADD		1	/* *(int *)UADDR2 += OPARG; */
-#define FUTEX_OP_OR		2	/* *(int *)UADDR2 |= OPARG; */
-#define FUTEX_OP_ANDN		3	/* *(int *)UADDR2 &= ~OPARG; */
-#define FUTEX_OP_XOR		4	/* *(int *)UADDR2 ^= OPARG; */
-
-#define FUTEX_OP_OPARG_SHIFT	8	/* Use (1 << OPARG) instead of OPARG.  */
-
-#define FUTEX_OP_CMP_EQ		0	/* if (oldval == CMPARG) wake */
-#define FUTEX_OP_CMP_NE		1	/* if (oldval != CMPARG) wake */
-#define FUTEX_OP_CMP_LT		2	/* if (oldval < CMPARG) wake */
-#define FUTEX_OP_CMP_LE		3	/* if (oldval <= CMPARG) wake */
-#define FUTEX_OP_CMP_GT		4	/* if (oldval > CMPARG) wake */
-#define FUTEX_OP_CMP_GE		5	/* if (oldval >= CMPARG) wake */
-
-/* FUTEX_WAKE_OP will perform atomically
-   int oldval = *(int *)UADDR2;
-   *(int *)UADDR2 = oldval OP OPARG;
-   if (oldval CMP CMPARG)
-     wake UADDR2;  */
-
-#define FUTEX_OP(op, oparg, cmp, cmparg) \
-  (((op & 0xf) << 28) | ((cmp & 0xf) << 24)		\
-   | ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
-
 #endif
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index b986be513406..bb7de09e8d57 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -1,6 +1,3 @@
-#ifndef _GAMEPORT_H
-#define _GAMEPORT_H
-
 /*
  *  Copyright (c) 1999-2002 Vojtech Pavlik
  *
@@ -8,8 +5,9 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
+#ifndef _GAMEPORT_H
+#define _GAMEPORT_H
 
-#ifdef __KERNEL__
 #include <asm/io.h>
 #include <linux/types.h>
 #include <linux/list.h>
@@ -17,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/timer.h>
 #include <linux/slab.h>
+#include <uapi/linux/gameport.h>
 
 struct gameport {
 
@@ -166,24 +165,6 @@ void gameport_unregister_driver(struct gameport_driver *drv);
 	module_driver(__gameport_driver, gameport_register_driver, \
 		       gameport_unregister_driver)
 
-#endif /* __KERNEL__ */
-
-#define GAMEPORT_MODE_DISABLED		0
-#define GAMEPORT_MODE_RAW		1
-#define GAMEPORT_MODE_COOKED		2
-
-#define GAMEPORT_ID_VENDOR_ANALOG	0x0001
-#define GAMEPORT_ID_VENDOR_MADCATZ	0x0002
-#define GAMEPORT_ID_VENDOR_LOGITECH	0x0003
-#define GAMEPORT_ID_VENDOR_CREATIVE	0x0004
-#define GAMEPORT_ID_VENDOR_GENIUS	0x0005
-#define GAMEPORT_ID_VENDOR_INTERACT	0x0006
-#define GAMEPORT_ID_VENDOR_MICROSOFT	0x0007
-#define GAMEPORT_ID_VENDOR_THRUSTMASTER	0x0008
-#define GAMEPORT_ID_VENDOR_GRAVIS	0x0009
-#define GAMEPORT_ID_VENDOR_GUILLEMOT	0x000a
-
-#ifdef __KERNEL__
 
 static inline void gameport_trigger(struct gameport *gameport)
 {
@@ -235,5 +216,4 @@ static inline void gameport_set_poll_interval(struct gameport *gameport, unsigne
 void gameport_start_polling(struct gameport *gameport);
 void gameport_stop_polling(struct gameport *gameport);
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/gen_stats.h b/include/linux/gen_stats.h
deleted file mode 100644
index 552c8a0a12d1..000000000000
--- a/include/linux/gen_stats.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef __LINUX_GEN_STATS_H
-#define __LINUX_GEN_STATS_H
-
-#include <linux/types.h>
-
-enum {
-	TCA_STATS_UNSPEC,
-	TCA_STATS_BASIC,
-	TCA_STATS_RATE_EST,
-	TCA_STATS_QUEUE,
-	TCA_STATS_APP,
-	__TCA_STATS_MAX,
-};
-#define TCA_STATS_MAX (__TCA_STATS_MAX - 1)
-
-/**
- * struct gnet_stats_basic - byte/packet throughput statistics
- * @bytes: number of seen bytes
- * @packets: number of seen packets
- */
-struct gnet_stats_basic {
-	__u64	bytes;
-	__u32	packets;
-};
-struct gnet_stats_basic_packed {
-	__u64	bytes;
-	__u32	packets;
-} __attribute__ ((packed));
-
-/**
- * struct gnet_stats_rate_est - rate estimator
- * @bps: current byte rate
- * @pps: current packet rate
- */
-struct gnet_stats_rate_est {
-	__u32	bps;
-	__u32	pps;
-};
-
-/**
- * struct gnet_stats_queue - queuing statistics
- * @qlen: queue length
- * @backlog: backlog size of queue
- * @drops: number of dropped packets
- * @requeues: number of requeues
- * @overlimits: number of enqueues over the limit
- */
-struct gnet_stats_queue {
-	__u32	qlen;
-	__u32	backlog;
-	__u32	drops;
-	__u32	requeues;
-	__u32	overlimits;
-};
-
-/**
- * struct gnet_estimator - rate estimator configuration
- * @interval: sampling period
- * @ewma_log: the log of measurement window weight
- */
-struct gnet_estimator {
-	signed char	interval;
-	unsigned char	ewma_log;
-};
-
-
-#endif /* __LINUX_GEN_STATS_H */
diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h
index 5ab61c1eb6bf..55b685719d52 100644
--- a/include/linux/genetlink.h
+++ b/include/linux/genetlink.h
@@ -1,86 +1,8 @@
 #ifndef __LINUX_GENERIC_NETLINK_H
 #define __LINUX_GENERIC_NETLINK_H
 
-#include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/genetlink.h>
 
-#define GENL_NAMSIZ	16	/* length of family name */
-
-#define GENL_MIN_ID	NLMSG_MIN_TYPE
-#define GENL_MAX_ID	1023
-
-struct genlmsghdr {
-	__u8	cmd;
-	__u8	version;
-	__u16	reserved;
-};
-
-#define GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct genlmsghdr))
-
-#define GENL_ADMIN_PERM		0x01
-#define GENL_CMD_CAP_DO		0x02
-#define GENL_CMD_CAP_DUMP	0x04
-#define GENL_CMD_CAP_HASPOL	0x08
-
-/*
- * List of reserved static generic netlink identifiers:
- */
-#define GENL_ID_GENERATE	0
-#define GENL_ID_CTRL		NLMSG_MIN_TYPE
-
-/**************************************************************************
- * Controller
- **************************************************************************/
-
-enum {
-	CTRL_CMD_UNSPEC,
-	CTRL_CMD_NEWFAMILY,
-	CTRL_CMD_DELFAMILY,
-	CTRL_CMD_GETFAMILY,
-	CTRL_CMD_NEWOPS,
-	CTRL_CMD_DELOPS,
-	CTRL_CMD_GETOPS,
-	CTRL_CMD_NEWMCAST_GRP,
-	CTRL_CMD_DELMCAST_GRP,
-	CTRL_CMD_GETMCAST_GRP, /* unused */
-	__CTRL_CMD_MAX,
-};
-
-#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1)
-
-enum {
-	CTRL_ATTR_UNSPEC,
-	CTRL_ATTR_FAMILY_ID,
-	CTRL_ATTR_FAMILY_NAME,
-	CTRL_ATTR_VERSION,
-	CTRL_ATTR_HDRSIZE,
-	CTRL_ATTR_MAXATTR,
-	CTRL_ATTR_OPS,
-	CTRL_ATTR_MCAST_GROUPS,
-	__CTRL_ATTR_MAX,
-};
-
-#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1)
-
-enum {
-	CTRL_ATTR_OP_UNSPEC,
-	CTRL_ATTR_OP_ID,
-	CTRL_ATTR_OP_FLAGS,
-	__CTRL_ATTR_OP_MAX,
-};
-
-#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1)
-
-enum {
-	CTRL_ATTR_MCAST_GRP_UNSPEC,
-	CTRL_ATTR_MCAST_GRP_NAME,
-	CTRL_ATTR_MCAST_GRP_ID,
-	__CTRL_ATTR_MCAST_GRP_MAX,
-};
-
-#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
-
-#ifdef __KERNEL__
 
 /* All generic netlink requests are serialized by a global lock.  */
 extern void genl_lock(void);
@@ -113,6 +35,4 @@ extern int lockdep_genl_is_held(void);
 #define MODULE_ALIAS_GENL_FAMILY(family)\
  MODULE_ALIAS_NET_PF_PROTO_NAME(PF_NETLINK, NETLINK_GENERIC, "-family-" family)
 
-#endif /* __KERNEL__ */
-
 #endif	/* __LINUX_GENERIC_NETLINK_H */
diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h
deleted file mode 100644
index b2de1f9a88d6..000000000000
--- a/include/linux/gfs2_ondisk.h
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc.  1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- */
-
-#ifndef __GFS2_ONDISK_DOT_H__
-#define __GFS2_ONDISK_DOT_H__
-
-#include <linux/types.h>
-
-#define GFS2_MAGIC		0x01161970
-#define GFS2_BASIC_BLOCK	512
-#define GFS2_BASIC_BLOCK_SHIFT	9
-
-/* Lock numbers of the LM_TYPE_NONDISK type */
-
-#define GFS2_MOUNT_LOCK		0
-#define GFS2_LIVE_LOCK		1
-#define GFS2_TRANS_LOCK		2
-#define GFS2_RENAME_LOCK	3
-#define GFS2_CONTROL_LOCK	4
-#define GFS2_MOUNTED_LOCK	5
-
-/* Format numbers for various metadata types */
-
-#define GFS2_FORMAT_NONE	0
-#define GFS2_FORMAT_SB		100
-#define GFS2_FORMAT_RG		200
-#define GFS2_FORMAT_RB		300
-#define GFS2_FORMAT_DI		400
-#define GFS2_FORMAT_IN		500
-#define GFS2_FORMAT_LF		600
-#define GFS2_FORMAT_JD		700
-#define GFS2_FORMAT_LH		800
-#define GFS2_FORMAT_LD		900
-#define GFS2_FORMAT_LB		1000
-#define GFS2_FORMAT_EA		1600
-#define GFS2_FORMAT_ED		1700
-#define GFS2_FORMAT_QC		1400
-/* These are format numbers for entities contained in files */
-#define GFS2_FORMAT_RI		1100
-#define GFS2_FORMAT_DE		1200
-#define GFS2_FORMAT_QU		1500
-/* These are part of the superblock */
-#define GFS2_FORMAT_FS		1801
-#define GFS2_FORMAT_MULTI	1900
-
-/*
- * An on-disk inode number
- */
-
-struct gfs2_inum {
-	__be64 no_formal_ino;
-	__be64 no_addr;
-};
-
-/*
- * Generic metadata head structure
- * Every inplace buffer logged in the journal must start with this.
- */
-
-#define GFS2_METATYPE_NONE	0
-#define GFS2_METATYPE_SB	1
-#define GFS2_METATYPE_RG	2
-#define GFS2_METATYPE_RB	3
-#define GFS2_METATYPE_DI	4
-#define GFS2_METATYPE_IN	5
-#define GFS2_METATYPE_LF	6
-#define GFS2_METATYPE_JD	7
-#define GFS2_METATYPE_LH	8
-#define GFS2_METATYPE_LD	9
-#define GFS2_METATYPE_LB	12
-#define GFS2_METATYPE_EA	10
-#define GFS2_METATYPE_ED	11
-#define GFS2_METATYPE_QC	14
-
-struct gfs2_meta_header {
-	__be32 mh_magic;
-	__be32 mh_type;
-	__be64 __pad0;		/* Was generation number in gfs1 */
-	__be32 mh_format;
-	/* This union is to keep userspace happy */
-	union {
-		__be32 mh_jid;		/* Was incarnation number in gfs1 */
-		__be32 __pad1;
-	};
-};
-
-/*
- * super-block structure
- *
- * It's probably good if SIZEOF_SB <= GFS2_BASIC_BLOCK (512 bytes)
- *
- * Order is important, need to be able to read old superblocks to do on-disk
- * version upgrades.
- */
-
-/* Address of superblock in GFS2 basic blocks */
-#define GFS2_SB_ADDR		128
-
-/* The lock number for the superblock (must be zero) */
-#define GFS2_SB_LOCK		0
-
-/* Requirement:  GFS2_LOCKNAME_LEN % 8 == 0
-   Includes: the fencing zero at the end */
-#define GFS2_LOCKNAME_LEN	64
-
-struct gfs2_sb {
-	struct gfs2_meta_header sb_header;
-
-	__be32 sb_fs_format;
-	__be32 sb_multihost_format;
-	__u32  __pad0;	/* Was superblock flags in gfs1 */
-
-	__be32 sb_bsize;
-	__be32 sb_bsize_shift;
-	__u32 __pad1;	/* Was journal segment size in gfs1 */
-
-	struct gfs2_inum sb_master_dir; /* Was jindex dinode in gfs1 */
-	struct gfs2_inum __pad2; /* Was rindex dinode in gfs1 */
-	struct gfs2_inum sb_root_dir;
-
-	char sb_lockproto[GFS2_LOCKNAME_LEN];
-	char sb_locktable[GFS2_LOCKNAME_LEN];
-
-	struct gfs2_inum __pad3; /* Was quota inode in gfs1 */
-	struct gfs2_inum __pad4; /* Was licence inode in gfs1 */
-#define GFS2_HAS_UUID 1
-	__u8 sb_uuid[16]; /* The UUID, maybe 0 for backwards compat */
-};
-
-/*
- * resource index structure
- */
-
-struct gfs2_rindex {
-	__be64 ri_addr;	/* grp block disk address */
-	__be32 ri_length;	/* length of rgrp header in fs blocks */
-	__u32 __pad;
-
-	__be64 ri_data0;	/* first data location */
-	__be32 ri_data;	/* num of data blocks in rgrp */
-
-	__be32 ri_bitbytes;	/* number of bytes in data bitmaps */
-
-	__u8 ri_reserved[64];
-};
-
-/*
- * resource group header structure
- */
-
-/* Number of blocks per byte in rgrp */
-#define GFS2_NBBY		4
-#define GFS2_BIT_SIZE		2
-#define GFS2_BIT_MASK		0x00000003
-
-#define GFS2_BLKST_FREE		0
-#define GFS2_BLKST_USED		1
-#define GFS2_BLKST_UNLINKED	2
-#define GFS2_BLKST_DINODE	3
-
-#define GFS2_RGF_JOURNAL	0x00000001
-#define GFS2_RGF_METAONLY	0x00000002
-#define GFS2_RGF_DATAONLY	0x00000004
-#define GFS2_RGF_NOALLOC	0x00000008
-#define GFS2_RGF_TRIMMED	0x00000010
-
-struct gfs2_rgrp_lvb {
-	__be32 rl_magic;
-	__be32 rl_flags;
-	__be32 rl_free;
-	__be32 rl_dinodes;
-	__be64 rl_igeneration;
-	__be32 rl_unlinked;
-	__be32 __pad;
-};
-
-struct gfs2_rgrp {
-	struct gfs2_meta_header rg_header;
-
-	__be32 rg_flags;
-	__be32 rg_free;
-	__be32 rg_dinodes;
-	__be32 __pad;
-	__be64 rg_igeneration;
-
-	__u8 rg_reserved[80]; /* Several fields from gfs1 now reserved */
-};
-
-/*
- * quota structure
- */
-
-struct gfs2_quota {
-	__be64 qu_limit;
-	__be64 qu_warn;
-	__be64 qu_value;
-	__u8 qu_reserved[64];
-};
-
-/*
- * dinode structure
- */
-
-#define GFS2_MAX_META_HEIGHT	10
-#define GFS2_DIR_MAX_DEPTH	17
-
-#define DT2IF(dt) (((dt) << 12) & S_IFMT)
-#define IF2DT(sif) (((sif) & S_IFMT) >> 12)
-
-enum {
-	gfs2fl_Jdata		= 0,
-	gfs2fl_ExHash		= 1,
-	gfs2fl_Unused		= 2,
-	gfs2fl_EaIndirect	= 3,
-	gfs2fl_Directio		= 4,
-	gfs2fl_Immutable	= 5,
-	gfs2fl_AppendOnly	= 6,
-	gfs2fl_NoAtime		= 7,
-	gfs2fl_Sync		= 8,
-	gfs2fl_System		= 9,
-	gfs2fl_TopLevel		= 10,
-	gfs2fl_TruncInProg	= 29,
-	gfs2fl_InheritDirectio	= 30,
-	gfs2fl_InheritJdata	= 31,
-};
-
-/* Dinode flags */
-#define GFS2_DIF_JDATA			0x00000001
-#define GFS2_DIF_EXHASH			0x00000002
-#define GFS2_DIF_UNUSED			0x00000004  /* only in gfs1 */
-#define GFS2_DIF_EA_INDIRECT		0x00000008
-#define GFS2_DIF_DIRECTIO		0x00000010
-#define GFS2_DIF_IMMUTABLE		0x00000020
-#define GFS2_DIF_APPENDONLY		0x00000040
-#define GFS2_DIF_NOATIME		0x00000080
-#define GFS2_DIF_SYNC			0x00000100
-#define GFS2_DIF_SYSTEM			0x00000200 /* New in gfs2 */
-#define GFS2_DIF_TOPDIR			0x00000400 /* New in gfs2 */
-#define GFS2_DIF_TRUNC_IN_PROG		0x20000000 /* New in gfs2 */
-#define GFS2_DIF_INHERIT_DIRECTIO	0x40000000 /* only in gfs1 */
-#define GFS2_DIF_INHERIT_JDATA		0x80000000
-
-struct gfs2_dinode {
-	struct gfs2_meta_header di_header;
-
-	struct gfs2_inum di_num;
-
-	__be32 di_mode;	/* mode of file */
-	__be32 di_uid;	/* owner's user id */
-	__be32 di_gid;	/* owner's group id */
-	__be32 di_nlink;	/* number of links to this file */
-	__be64 di_size;	/* number of bytes in file */
-	__be64 di_blocks;	/* number of blocks in file */
-	__be64 di_atime;	/* time last accessed */
-	__be64 di_mtime;	/* time last modified */
-	__be64 di_ctime;	/* time last changed */
-	__be32 di_major;	/* device major number */
-	__be32 di_minor;	/* device minor number */
-
-	/* This section varies from gfs1. Padding added to align with
-         * remainder of dinode
-	 */
-	__be64 di_goal_meta;	/* rgrp to alloc from next */
-	__be64 di_goal_data;	/* data block goal */
-	__be64 di_generation;	/* generation number for NFS */
-
-	__be32 di_flags;	/* GFS2_DIF_... */
-	__be32 di_payload_format;  /* GFS2_FORMAT_... */
-	__u16 __pad1;	/* Was ditype in gfs1 */
-	__be16 di_height;	/* height of metadata */
-	__u32 __pad2;	/* Unused incarnation number from gfs1 */
-
-	/* These only apply to directories  */
-	__u16 __pad3;	/* Padding */
-	__be16 di_depth;	/* Number of bits in the table */
-	__be32 di_entries;	/* The number of entries in the directory */
-
-	struct gfs2_inum __pad4; /* Unused even in current gfs1 */
-
-	__be64 di_eattr;	/* extended attribute block number */
-	__be32 di_atime_nsec;   /* nsec portion of atime */
-	__be32 di_mtime_nsec;   /* nsec portion of mtime */
-	__be32 di_ctime_nsec;   /* nsec portion of ctime */
-
-	__u8 di_reserved[44];
-};
-
-/*
- * directory structure - many of these per directory file
- */
-
-#define GFS2_FNAMESIZE		255
-#define GFS2_DIRENT_SIZE(name_len) ((sizeof(struct gfs2_dirent) + (name_len) + 7) & ~7)
-
-struct gfs2_dirent {
-	struct gfs2_inum de_inum;
-	__be32 de_hash;
-	__be16 de_rec_len;
-	__be16 de_name_len;
-	__be16 de_type;
-	__u8 __pad[14];
-};
-
-/*
- * Header of leaf directory nodes
- */
-
-struct gfs2_leaf {
-	struct gfs2_meta_header lf_header;
-
-	__be16 lf_depth;		/* Depth of leaf */
-	__be16 lf_entries;		/* Number of dirents in leaf */
-	__be32 lf_dirent_format;	/* Format of the dirents */
-	__be64 lf_next;			/* Next leaf, if overflow */
-
-	__u8 lf_reserved[64];
-};
-
-/*
- * Extended attribute header format
- *
- * This works in a similar way to dirents. There is a fixed size header
- * followed by a variable length section made up of the name and the
- * associated data. In the case of a "stuffed" entry, the value is
- * inline directly after the name, the ea_num_ptrs entry will be
- * zero in that case. For non-"stuffed" entries, there will be
- * a set of pointers (aligned to 8 byte boundary) to the block(s)
- * containing the value.
- *
- * The blocks containing the values and the blocks containing the
- * extended attribute headers themselves all start with the common
- * metadata header. Each inode, if it has extended attributes, will
- * have either a single block containing the extended attribute headers
- * or a single indirect block pointing to blocks containing the
- * extended attribure headers.
- *
- * The maximim size of the data part of an extended attribute is 64k
- * so the number of blocks required depends upon block size. Since the
- * block size also determines the number of pointers in an indirect
- * block, its a fairly complicated calculation to work out the maximum
- * number of blocks that an inode may have relating to extended attributes.
- *
- */
-
-#define GFS2_EA_MAX_NAME_LEN	255
-#define GFS2_EA_MAX_DATA_LEN	65536
-
-#define GFS2_EATYPE_UNUSED	0
-#define GFS2_EATYPE_USR		1
-#define GFS2_EATYPE_SYS		2
-#define GFS2_EATYPE_SECURITY	3
-
-#define GFS2_EATYPE_LAST	3
-#define GFS2_EATYPE_VALID(x)	((x) <= GFS2_EATYPE_LAST)
-
-#define GFS2_EAFLAG_LAST	0x01	/* last ea in block */
-
-struct gfs2_ea_header {
-	__be32 ea_rec_len;
-	__be32 ea_data_len;
-	__u8 ea_name_len;	/* no NULL pointer after the string */
-	__u8 ea_type;		/* GFS2_EATYPE_... */
-	__u8 ea_flags;		/* GFS2_EAFLAG_... */
-	__u8 ea_num_ptrs;
-	__u32 __pad;
-};
-
-/*
- * Log header structure
- */
-
-#define GFS2_LOG_HEAD_UNMOUNT	0x00000001	/* log is clean */
-
-struct gfs2_log_header {
-	struct gfs2_meta_header lh_header;
-
-	__be64 lh_sequence;	/* Sequence number of this transaction */
-	__be32 lh_flags;	/* GFS2_LOG_HEAD_... */
-	__be32 lh_tail;		/* Block number of log tail */
-	__be32 lh_blkno;
-	__be32 lh_hash;
-};
-
-/*
- * Log type descriptor
- */
-
-#define GFS2_LOG_DESC_METADATA	300
-/* ld_data1 is the number of metadata blocks in the descriptor.
-   ld_data2 is unused. */
-
-#define GFS2_LOG_DESC_REVOKE	301
-/* ld_data1 is the number of revoke blocks in the descriptor.
-   ld_data2 is unused. */
-
-#define GFS2_LOG_DESC_JDATA	302
-/* ld_data1 is the number of data blocks in the descriptor.
-   ld_data2 is unused. */
-
-struct gfs2_log_descriptor {
-	struct gfs2_meta_header ld_header;
-
-	__be32 ld_type;		/* GFS2_LOG_DESC_... */
-	__be32 ld_length;	/* Number of buffers in this chunk */
-	__be32 ld_data1;	/* descriptor-specific field */
-	__be32 ld_data2;	/* descriptor-specific field */
-
-	__u8 ld_reserved[32];
-};
-
-/*
- * Inum Range
- * Describe a range of formal inode numbers allocated to
- * one machine to assign to inodes.
- */
-
-#define GFS2_INUM_QUANTUM	1048576
-
-struct gfs2_inum_range {
-	__be64 ir_start;
-	__be64 ir_length;
-};
-
-/*
- * Statfs change
- * Describes an change to the pool of free and allocated
- * blocks.
- */
-
-struct gfs2_statfs_change {
-	__be64 sc_total;
-	__be64 sc_free;
-	__be64 sc_dinodes;
-};
-
-/*
- * Quota change
- * Describes an allocation change for a particular
- * user or group.
- */
-
-#define GFS2_QCF_USER		0x00000001
-
-struct gfs2_quota_change {
-	__be64 qc_change;
-	__be32 qc_flags;	/* GFS2_QCF_... */
-	__be32 qc_id;
-};
-
-struct gfs2_quota_lvb {
-        __be32 qb_magic;
-        __u32 __pad;
-        __be64 qb_limit;      /* Hard limit of # blocks to alloc */
-        __be64 qb_warn;       /* Warn user when alloc is above this # */
-        __be64 qb_value;       /* Current # blocks allocated */
-};
-
-#endif /* __GFS2_ONDISK_DOT_H__ */
diff --git a/include/linux/gigaset_dev.h b/include/linux/gigaset_dev.h
deleted file mode 100644
index 258ba82937e7..000000000000
--- a/include/linux/gigaset_dev.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * interface to user space for the gigaset driver
- *
- * Copyright (c) 2004 by Hansjoerg Lipp <hjlipp@web.de>
- *
- * =====================================================================
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License as
- *    published by the Free Software Foundation; either version 2 of
- *    the License, or (at your option) any later version.
- * =====================================================================
- */
-
-#ifndef GIGASET_INTERFACE_H
-#define GIGASET_INTERFACE_H
-
-#include <linux/ioctl.h>
-
-/* The magic IOCTL value for this interface. */
-#define GIGASET_IOCTL 0x47
-
-/* enable/disable device control via character device (lock out ISDN subsys) */
-#define GIGASET_REDIR    _IOWR(GIGASET_IOCTL, 0, int)
-
-/* enable adapter configuration mode (M10x only) */
-#define GIGASET_CONFIG   _IOWR(GIGASET_IOCTL, 1, int)
-
-/* set break characters (M105 only) */
-#define GIGASET_BRKCHARS _IOW(GIGASET_IOCTL, 2, unsigned char[6])
-
-/* get version information selected by arg[0] */
-#define GIGASET_VERSION  _IOWR(GIGASET_IOCTL, 3, unsigned[4])
-/* values for GIGASET_VERSION arg[0] */
-#define GIGVER_DRIVER 0		/* get driver version */
-#define GIGVER_COMPAT 1		/* get interface compatibility version */
-#define GIGVER_FWBASE 2		/* get base station firmware version */
-
-#endif
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index ee275c8b3df1..1acb1445e05f 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -7,24 +7,14 @@
  * under the terms of version 2 of the GNU General Public License
  * as published by the Free Software Foundation.
  */
-
 #ifndef __HDLC_H
 #define __HDLC_H
 
 
-#define HDLC_MAX_MTU 1500	/* Ethernet 1500 bytes */
-#if 0
-#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
-#else
-#define HDLC_MAX_MRU 1600 /* as required for FR network */
-#endif
-
-
-#ifdef __KERNEL__
-
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 #include <linux/hdlc/ioctl.h>
+#include <uapi/linux/hdlc.h>
 
 /* This structure is a private property of HDLC protocols.
    Hardware drivers have no interest here */
@@ -127,5 +117,4 @@ static __inline__ __be16 hdlc_type_trans(struct sk_buff *skb,
 		return htons(ETH_P_HDLC);
 }
 
-#endif /* __KERNEL */
 #endif /* __HDLC_H */
diff --git a/include/linux/hdlcdrv.h b/include/linux/hdlcdrv.h
index c010b4a785b8..be3be25bb898 100644
--- a/include/linux/hdlcdrv.h
+++ b/include/linux/hdlcdrv.h
@@ -3,110 +3,14 @@
  * The Linux soundcard driver for 1200 baud and 9600 baud packet radio
  * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
  */
-
 #ifndef _HDLCDRV_H
 #define _HDLCDRV_H
 
-/* -------------------------------------------------------------------- */
-/*
- * structs for the IOCTL commands
- */
-
-struct hdlcdrv_params {
-	int iobase;
-	int irq;
-	int dma;
-	int dma2;
-	int seriobase;
-	int pariobase;
-	int midiiobase;
-};	
-
-struct hdlcdrv_channel_params {
-	int tx_delay;  /* the transmitter keyup delay in 10ms units */
-	int tx_tail;   /* the transmitter keyoff delay in 10ms units */
-	int slottime;  /* the slottime in 10ms; usually 10 = 100ms */
-	int ppersist;  /* the p-persistence 0..255 */
-	int fulldup;   /* some driver do not support full duplex, setting */
-	               /* this just makes them send even if DCD is on */
-};	
-
-struct hdlcdrv_old_channel_state {
-  	int ptt;
-  	int dcd;
-  	int ptt_keyed;
-};
-
-struct hdlcdrv_channel_state {
- 	int ptt;
- 	int dcd;
- 	int ptt_keyed;
- 	unsigned long tx_packets;
- 	unsigned long tx_errors;
- 	unsigned long rx_packets;
- 	unsigned long rx_errors;
-};
-
-struct hdlcdrv_ioctl {
-	int cmd;
-	union {
-		struct hdlcdrv_params mp;
-		struct hdlcdrv_channel_params cp;
-		struct hdlcdrv_channel_state cs;
-		struct hdlcdrv_old_channel_state ocs;
-		unsigned int calibrate;
-		unsigned char bits;
-		char modename[128];
-		char drivername[32];
-	} data;
-};
-
-/* -------------------------------------------------------------------- */
-
-/*
- * ioctl values
- */
-#define HDLCDRVCTL_GETMODEMPAR       0
-#define HDLCDRVCTL_SETMODEMPAR       1
-#define HDLCDRVCTL_MODEMPARMASK      2  /* not handled by hdlcdrv */
-#define HDLCDRVCTL_GETCHANNELPAR    10
-#define HDLCDRVCTL_SETCHANNELPAR    11
-#define HDLCDRVCTL_OLDGETSTAT       20
-#define HDLCDRVCTL_CALIBRATE        21
-#define HDLCDRVCTL_GETSTAT          22
-
-/*
- * these are mainly for debugging purposes
- */
-#define HDLCDRVCTL_GETSAMPLES       30
-#define HDLCDRVCTL_GETBITS          31
-
-/*
- * not handled by hdlcdrv, but by its depending drivers
- */
-#define HDLCDRVCTL_GETMODE          40
-#define HDLCDRVCTL_SETMODE          41
-#define HDLCDRVCTL_MODELIST         42
-#define HDLCDRVCTL_DRIVERNAME       43
-
-/*
- * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
- */
-#define HDLCDRV_PARMASK_IOBASE      (1<<0)
-#define HDLCDRV_PARMASK_IRQ         (1<<1)
-#define HDLCDRV_PARMASK_DMA         (1<<2)
-#define HDLCDRV_PARMASK_DMA2        (1<<3)
-#define HDLCDRV_PARMASK_SERIOBASE   (1<<4)
-#define HDLCDRV_PARMASK_PARIOBASE   (1<<5)
-#define HDLCDRV_PARMASK_MIDIIOBASE  (1<<6)
-
-/* -------------------------------------------------------------------- */
-
-#ifdef __KERNEL__
 
 #include <linux/netdevice.h>
 #include <linux/if.h>
 #include <linux/spinlock.h>
+#include <uapi/linux/hdlcdrv.h>
 
 #define HDLCDRV_MAGIC      0x5ac6e778
 #define HDLCDRV_HDLCBUFFER  32 /* should be a power of 2 for speed reasons */
@@ -368,10 +272,4 @@ void hdlcdrv_unregister(struct net_device *dev);
 
 
 
-#endif /* __KERNEL__ */
-
-/* -------------------------------------------------------------------- */
-
 #endif /* _HDLCDRV_H */
-
-/* -------------------------------------------------------------------- */
diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
deleted file mode 100644
index 29ee2873f4a8..000000000000
--- a/include/linux/hdreg.h
+++ /dev/null
@@ -1,658 +0,0 @@
-#ifndef _LINUX_HDREG_H
-#define _LINUX_HDREG_H
-
-#include <linux/types.h>
-
-/*
- * Command Header sizes for IOCTL commands
- */
-
-#define HDIO_DRIVE_CMD_HDR_SIZE		(4 * sizeof(__u8))
-#define HDIO_DRIVE_HOB_HDR_SIZE		(8 * sizeof(__u8))
-#define HDIO_DRIVE_TASK_HDR_SIZE	(8 * sizeof(__u8))
-
-#define IDE_DRIVE_TASK_NO_DATA		0
-#ifndef __KERNEL__
-#define IDE_DRIVE_TASK_INVALID		-1
-#define IDE_DRIVE_TASK_SET_XFER		1
-#define IDE_DRIVE_TASK_IN		2
-#define IDE_DRIVE_TASK_OUT		3
-#endif
-#define IDE_DRIVE_TASK_RAW_WRITE	4
-
-/*
- * Define standard taskfile in/out register
- */
-#define IDE_TASKFILE_STD_IN_FLAGS	0xFE
-#define IDE_HOB_STD_IN_FLAGS		0x3C
-#ifndef __KERNEL__
-#define IDE_TASKFILE_STD_OUT_FLAGS	0xFE
-#define IDE_HOB_STD_OUT_FLAGS		0x3C
-
-typedef unsigned char task_ioreg_t;
-typedef unsigned long sata_ioreg_t;
-#endif
-
-typedef union ide_reg_valid_s {
-	unsigned all				: 16;
-	struct {
-		unsigned data			: 1;
-		unsigned error_feature		: 1;
-		unsigned sector			: 1;
-		unsigned nsector		: 1;
-		unsigned lcyl			: 1;
-		unsigned hcyl			: 1;
-		unsigned select			: 1;
-		unsigned status_command		: 1;
-
-		unsigned data_hob		: 1;
-		unsigned error_feature_hob	: 1;
-		unsigned sector_hob		: 1;
-		unsigned nsector_hob		: 1;
-		unsigned lcyl_hob		: 1;
-		unsigned hcyl_hob		: 1;
-		unsigned select_hob		: 1;
-		unsigned control_hob		: 1;
-	} b;
-} ide_reg_valid_t;
-
-typedef struct ide_task_request_s {
-	__u8		io_ports[8];
-	__u8		hob_ports[8]; /* bytes 6 and 7 are unused */
-	ide_reg_valid_t	out_flags;
-	ide_reg_valid_t	in_flags;
-	int		data_phase;
-	int		req_cmd;
-	unsigned long	out_size;
-	unsigned long	in_size;
-} ide_task_request_t;
-
-typedef struct ide_ioctl_request_s {
-	ide_task_request_t	*task_request;
-	unsigned char		*out_buffer;
-	unsigned char		*in_buffer;
-} ide_ioctl_request_t;
-
-struct hd_drive_cmd_hdr {
-	__u8 command;
-	__u8 sector_number;
-	__u8 feature;
-	__u8 sector_count;
-};
-
-#ifndef __KERNEL__
-typedef struct hd_drive_task_hdr {
-	__u8 data;
-	__u8 feature;
-	__u8 sector_count;
-	__u8 sector_number;
-	__u8 low_cylinder;
-	__u8 high_cylinder;
-	__u8 device_head;
-	__u8 command;
-} task_struct_t;
-
-typedef struct hd_drive_hob_hdr {
-	__u8 data;
-	__u8 feature;
-	__u8 sector_count;
-	__u8 sector_number;
-	__u8 low_cylinder;
-	__u8 high_cylinder;
-	__u8 device_head;
-	__u8 control;
-} hob_struct_t;
-#endif
-
-#define TASKFILE_NO_DATA		0x0000
-
-#define TASKFILE_IN			0x0001
-#define TASKFILE_MULTI_IN		0x0002
-
-#define TASKFILE_OUT			0x0004
-#define TASKFILE_MULTI_OUT		0x0008
-#define TASKFILE_IN_OUT			0x0010
-
-#define TASKFILE_IN_DMA			0x0020
-#define TASKFILE_OUT_DMA		0x0040
-#define TASKFILE_IN_DMAQ		0x0080
-#define TASKFILE_OUT_DMAQ		0x0100
-
-#ifndef __KERNEL__
-#define TASKFILE_P_IN			0x0200
-#define TASKFILE_P_OUT			0x0400
-#define TASKFILE_P_IN_DMA		0x0800
-#define TASKFILE_P_OUT_DMA		0x1000
-#define TASKFILE_P_IN_DMAQ		0x2000
-#define TASKFILE_P_OUT_DMAQ		0x4000
-#define TASKFILE_48			0x8000
-#define TASKFILE_INVALID		0x7fff
-#endif
-
-#ifndef __KERNEL__
-/* ATA/ATAPI Commands pre T13 Spec */
-#define WIN_NOP				0x00
-/*
- *	0x01->0x02 Reserved
- */
-#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
-/*
- *	0x04->0x07 Reserved
- */
-#define WIN_SRST			0x08 /* ATAPI soft reset command */
-#define WIN_DEVICE_RESET		0x08
-/*
- *	0x09->0x0F Reserved
- */
-#define WIN_RECAL			0x10
-#define WIN_RESTORE			WIN_RECAL
-/*
- *	0x10->0x1F Reserved
- */
-#define WIN_READ			0x20 /* 28-Bit */
-#define WIN_READ_ONCE			0x21 /* 28-Bit without retries */
-#define WIN_READ_LONG			0x22 /* 28-Bit */
-#define WIN_READ_LONG_ONCE		0x23 /* 28-Bit without retries */
-#define WIN_READ_EXT			0x24 /* 48-Bit */
-#define WIN_READDMA_EXT			0x25 /* 48-Bit */
-#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
-#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
-/*
- *	0x28
- */
-#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
-/*
- *	0x2A->0x2F Reserved
- */
-#define WIN_WRITE			0x30 /* 28-Bit */
-#define WIN_WRITE_ONCE			0x31 /* 28-Bit without retries */
-#define WIN_WRITE_LONG			0x32 /* 28-Bit */
-#define WIN_WRITE_LONG_ONCE		0x33 /* 28-Bit without retries */
-#define WIN_WRITE_EXT			0x34 /* 48-Bit */
-#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
-#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
-#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
-#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
-#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
-/*
- *	0x3A->0x3B Reserved
- */
-#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
-/*
- *	0x3D->0x3F Reserved
- */
-#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
-#define WIN_VERIFY_ONCE			0x41 /* 28-Bit - without retries */
-#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
-/*
- *	0x43->0x4F Reserved
- */
-#define WIN_FORMAT			0x50
-/*
- *	0x51->0x5F Reserved
- */
-#define WIN_INIT			0x60
-/*
- *	0x61->0x5F Reserved
- */
-#define WIN_SEEK			0x70 /* 0x70-0x7F Reserved */
-
-#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
-#define WIN_DIAGNOSE			0x90
-#define WIN_SPECIFY			0x91 /* set drive geometry translation */
-#define WIN_DOWNLOAD_MICROCODE		0x92
-#define WIN_STANDBYNOW2			0x94
-#define WIN_STANDBY2			0x96
-#define WIN_SETIDLE2			0x97
-#define WIN_CHECKPOWERMODE2		0x98
-#define WIN_SLEEPNOW2			0x99
-/*
- *	0x9A VENDOR
- */
-#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
-#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
-#define WIN_QUEUED_SERVICE		0xA2
-#define WIN_SMART			0xB0 /* self-monitoring and reporting */
-#define CFA_ERASE_SECTORS		0xC0
-#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
-#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
-#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
-#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
-#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
-#define WIN_READDMA_ONCE		0xC9 /* 28-Bit - without retries */
-#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
-#define WIN_WRITEDMA_ONCE		0xCB /* 28-Bit - without retries */
-#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
-#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
-#define WIN_GETMEDIASTATUS		0xDA
-#define WIN_ACKMEDIACHANGE		0xDB /* ATA-1, ATA-2 vendor */
-#define WIN_POSTBOOT			0xDC
-#define WIN_PREBOOT 			0xDD
-#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
-#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
-#define WIN_STANDBYNOW1			0xE0
-#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
-#define WIN_STANDBY			0xE2 /* Set device in Standby Mode */
-#define WIN_SETIDLE1			0xE3
-#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
-#define WIN_CHECKPOWERMODE1		0xE5
-#define WIN_SLEEPNOW1			0xE6
-#define WIN_FLUSH_CACHE			0xE7
-#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
-#define WIN_WRITE_SAME			0xE9 /* read ata-2 to use */
-	/* SET_FEATURES 0x22 or 0xDD */
-#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
-#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
-#define WIN_MEDIAEJECT			0xED
-#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
-#define WIN_SETFEATURES			0xEF /* set special drive features */
-#define EXABYTE_ENABLE_NEST		0xF0
-#define WIN_SECURITY_SET_PASS		0xF1
-#define WIN_SECURITY_UNLOCK		0xF2
-#define WIN_SECURITY_ERASE_PREPARE	0xF3
-#define WIN_SECURITY_ERASE_UNIT		0xF4
-#define WIN_SECURITY_FREEZE_LOCK	0xF5
-#define WIN_SECURITY_DISABLE		0xF6
-#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
-#define WIN_SET_MAX			0xF9
-#define DISABLE_SEAGATE			0xFB
-
-/* WIN_SMART sub-commands */
-
-#define SMART_READ_VALUES		0xD0
-#define SMART_READ_THRESHOLDS		0xD1
-#define SMART_AUTOSAVE			0xD2
-#define SMART_SAVE			0xD3
-#define SMART_IMMEDIATE_OFFLINE		0xD4
-#define SMART_READ_LOG_SECTOR		0xD5
-#define SMART_WRITE_LOG_SECTOR		0xD6
-#define SMART_WRITE_THRESHOLDS		0xD7
-#define SMART_ENABLE			0xD8
-#define SMART_DISABLE			0xD9
-#define SMART_STATUS			0xDA
-#define SMART_AUTO_OFFLINE		0xDB
-
-/* Password used in TF4 & TF5 executing SMART commands */
-
-#define SMART_LCYL_PASS			0x4F
-#define SMART_HCYL_PASS			0xC2
-
-/* WIN_SETFEATURES sub-commands */
-#define SETFEATURES_EN_8BIT	0x01	/* Enable 8-Bit Transfers */
-#define SETFEATURES_EN_WCACHE	0x02	/* Enable write cache */
-#define SETFEATURES_DIS_DEFECT	0x04	/* Disable Defect Management */
-#define SETFEATURES_EN_APM	0x05	/* Enable advanced power management */
-#define SETFEATURES_EN_SAME_R	0x22	/* for a region ATA-1 */
-#define SETFEATURES_DIS_MSN	0x31	/* Disable Media Status Notification */
-#define SETFEATURES_DIS_RETRY	0x33	/* Disable Retry */
-#define SETFEATURES_EN_AAM	0x42	/* Enable Automatic Acoustic Management */
-#define SETFEATURES_RW_LONG	0x44	/* Set Length of VS bytes */
-#define SETFEATURES_SET_CACHE	0x54	/* Set Cache segments to SC Reg. Val */
-#define SETFEATURES_DIS_RLA	0x55	/* Disable read look-ahead feature */
-#define SETFEATURES_EN_RI	0x5D	/* Enable release interrupt */
-#define SETFEATURES_EN_SI	0x5E	/* Enable SERVICE interrupt */
-#define SETFEATURES_DIS_RPOD	0x66	/* Disable reverting to power on defaults */
-#define SETFEATURES_DIS_ECC	0x77	/* Disable ECC byte count */
-#define SETFEATURES_DIS_8BIT	0x81	/* Disable 8-Bit Transfers */
-#define SETFEATURES_DIS_WCACHE	0x82	/* Disable write cache */
-#define SETFEATURES_EN_DEFECT	0x84	/* Enable Defect Management */
-#define SETFEATURES_DIS_APM	0x85	/* Disable advanced power management */
-#define SETFEATURES_EN_ECC	0x88	/* Enable ECC byte count */
-#define SETFEATURES_EN_MSN	0x95	/* Enable Media Status Notification */
-#define SETFEATURES_EN_RETRY	0x99	/* Enable Retry */
-#define SETFEATURES_EN_RLA	0xAA	/* Enable read look-ahead feature */
-#define SETFEATURES_PREFETCH	0xAB	/* Sets drive prefetch value */
-#define SETFEATURES_EN_REST	0xAC	/* ATA-1 */
-#define SETFEATURES_4B_RW_LONG	0xBB	/* Set Length of 4 bytes */
-#define SETFEATURES_DIS_AAM	0xC2	/* Disable Automatic Acoustic Management */
-#define SETFEATURES_EN_RPOD	0xCC	/* Enable reverting to power on defaults */
-#define SETFEATURES_DIS_RI	0xDD	/* Disable release interrupt ATAPI */
-#define SETFEATURES_EN_SAME_M	0xDD	/* for a entire device ATA-1 */
-#define SETFEATURES_DIS_SI	0xDE	/* Disable SERVICE interrupt ATAPI */
-
-/* WIN_SECURITY sub-commands */
-
-#define SECURITY_SET_PASSWORD		0xBA
-#define SECURITY_UNLOCK			0xBB
-#define SECURITY_ERASE_PREPARE		0xBC
-#define SECURITY_ERASE_UNIT		0xBD
-#define SECURITY_FREEZE_LOCK		0xBE
-#define SECURITY_DISABLE_PASSWORD	0xBF
-#endif /* __KERNEL__ */
-
-struct hd_geometry {
-      unsigned char heads;
-      unsigned char sectors;
-      unsigned short cylinders;
-      unsigned long start;
-};
-
-/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
-#define HDIO_GETGEO		0x0301	/* get device geometry */
-#define HDIO_GET_UNMASKINTR	0x0302	/* get current unmask setting */
-#define HDIO_GET_MULTCOUNT	0x0304	/* get current IDE blockmode setting */
-#define HDIO_GET_QDMA		0x0305	/* get use-qdma flag */
-
-#define HDIO_SET_XFER		0x0306  /* set transfer rate via proc */
-
-#define HDIO_OBSOLETE_IDENTITY	0x0307	/* OBSOLETE, DO NOT USE: returns 142 bytes */
-#define HDIO_GET_KEEPSETTINGS	0x0308	/* get keep-settings-on-reset flag */
-#define HDIO_GET_32BIT		0x0309	/* get current io_32bit setting */
-#define HDIO_GET_NOWERR		0x030a	/* get ignore-write-error flag */
-#define HDIO_GET_DMA		0x030b	/* get use-dma flag */
-#define HDIO_GET_NICE		0x030c	/* get nice flags */
-#define HDIO_GET_IDENTITY	0x030d	/* get IDE identification info */
-#define HDIO_GET_WCACHE		0x030e	/* get write cache mode on|off */
-#define HDIO_GET_ACOUSTIC	0x030f	/* get acoustic value */
-#define	HDIO_GET_ADDRESS	0x0310	/* */
-
-#define HDIO_GET_BUSSTATE	0x031a	/* get the bus state of the hwif */
-#define HDIO_TRISTATE_HWIF	0x031b	/* execute a channel tristate */
-#define HDIO_DRIVE_RESET	0x031c	/* execute a device reset */
-#define HDIO_DRIVE_TASKFILE	0x031d	/* execute raw taskfile */
-#define HDIO_DRIVE_TASK		0x031e	/* execute task and special drive command */
-#define HDIO_DRIVE_CMD		0x031f	/* execute a special drive command */
-#define HDIO_DRIVE_CMD_AEB	HDIO_DRIVE_TASK
-
-/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
-#define HDIO_SET_MULTCOUNT	0x0321	/* change IDE blockmode */
-#define HDIO_SET_UNMASKINTR	0x0322	/* permit other irqs during I/O */
-#define HDIO_SET_KEEPSETTINGS	0x0323	/* keep ioctl settings on reset */
-#define HDIO_SET_32BIT		0x0324	/* change io_32bit flags */
-#define HDIO_SET_NOWERR		0x0325	/* change ignore-write-error flag */
-#define HDIO_SET_DMA		0x0326	/* change use-dma flag */
-#define HDIO_SET_PIO_MODE	0x0327	/* reconfig interface to new speed */
-#ifndef __KERNEL__
-#define HDIO_SCAN_HWIF		0x0328	/* register and (re)scan interface */
-#define HDIO_UNREGISTER_HWIF	0x032a  /* unregister interface */
-#endif
-#define HDIO_SET_NICE		0x0329	/* set nice flags */
-#define HDIO_SET_WCACHE		0x032b	/* change write cache enable-disable */
-#define HDIO_SET_ACOUSTIC	0x032c	/* change acoustic behavior */
-#define HDIO_SET_BUSSTATE	0x032d	/* set the bus state of the hwif */
-#define HDIO_SET_QDMA		0x032e	/* change use-qdma flag */
-#define HDIO_SET_ADDRESS	0x032f	/* change lba addressing modes */
-
-/* bus states */
-enum {
-	BUSSTATE_OFF = 0,
-	BUSSTATE_ON,
-	BUSSTATE_TRISTATE
-};
-
-/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
-/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
-/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */
-/* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */
-/* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */
-
-#define __NEW_HD_DRIVE_ID
-
-#ifndef __KERNEL__
-/*
- * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
- *
- * If you change something here, please remember to update fix_driveid() in
- * ide/probe.c.
- */
-struct hd_driveid {
-	unsigned short	config;		/* lots of obsolete bit flags */
-	unsigned short	cyls;		/* Obsolete, "physical" cyls */
-	unsigned short	reserved2;	/* reserved (word 2) */
-	unsigned short	heads;		/* Obsolete, "physical" heads */
-	unsigned short	track_bytes;	/* unformatted bytes per track */
-	unsigned short	sector_bytes;	/* unformatted bytes per sector */
-	unsigned short	sectors;	/* Obsolete, "physical" sectors per track */
-	unsigned short	vendor0;	/* vendor unique */
-	unsigned short	vendor1;	/* vendor unique */
-	unsigned short	vendor2;	/* Retired vendor unique */
-	unsigned char	serial_no[20];	/* 0 = not_specified */
-	unsigned short	buf_type;	/* Retired */
-	unsigned short	buf_size;	/* Retired, 512 byte increments
-					 * 0 = not_specified
-					 */
-	unsigned short	ecc_bytes;	/* for r/w long cmds; 0 = not_specified */
-	unsigned char	fw_rev[8];	/* 0 = not_specified */
-	unsigned char	model[40];	/* 0 = not_specified */
-	unsigned char	max_multsect;	/* 0=not_implemented */
-	unsigned char	vendor3;	/* vendor unique */
-	unsigned short	dword_io;	/* 0=not_implemented; 1=implemented */
-	unsigned char	vendor4;	/* vendor unique */
-	unsigned char	capability;	/* (upper byte of word 49)
-					 *  3:	IORDYsup
-					 *  2:	IORDYsw
-					 *  1:	LBA
-					 *  0:	DMA
-					 */
-	unsigned short	reserved50;	/* reserved (word 50) */
-	unsigned char	vendor5;	/* Obsolete, vendor unique */
-	unsigned char	tPIO;		/* Obsolete, 0=slow, 1=medium, 2=fast */
-	unsigned char	vendor6;	/* Obsolete, vendor unique */
-	unsigned char	tDMA;		/* Obsolete, 0=slow, 1=medium, 2=fast */
-	unsigned short	field_valid;	/* (word 53)
-					 *  2:	ultra_ok	word  88
-					 *  1:	eide_ok		words 64-70
-					 *  0:	cur_ok		words 54-58
-					 */
-	unsigned short	cur_cyls;	/* Obsolete, logical cylinders */
-	unsigned short	cur_heads;	/* Obsolete, l heads */
-	unsigned short	cur_sectors;	/* Obsolete, l sectors per track */
-	unsigned short	cur_capacity0;	/* Obsolete, l total sectors on drive */
-	unsigned short	cur_capacity1;	/* Obsolete, (2 words, misaligned int)     */
-	unsigned char	multsect;	/* current multiple sector count */
-	unsigned char	multsect_valid;	/* when (bit0==1) multsect is ok */
-	unsigned int	lba_capacity;	/* Obsolete, total number of sectors */
-	unsigned short	dma_1word;	/* Obsolete, single-word dma info */
-	unsigned short	dma_mword;	/* multiple-word dma info */
-	unsigned short  eide_pio_modes; /* bits 0:mode3 1:mode4 */
-	unsigned short  eide_dma_min;	/* min mword dma cycle time (ns) */
-	unsigned short  eide_dma_time;	/* recommended mword dma cycle time (ns) */
-	unsigned short  eide_pio;       /* min cycle time (ns), no IORDY  */
-	unsigned short  eide_pio_iordy; /* min cycle time (ns), with IORDY */
-	unsigned short	words69_70[2];	/* reserved words 69-70
-					 * future command overlap and queuing
-					 */
-	unsigned short	words71_74[4];	/* reserved words 71-74
-					 * for IDENTIFY PACKET DEVICE command
-					 */
-	unsigned short  queue_depth;	/* (word 75)
-					 * 15:5	reserved
-					 *  4:0	Maximum queue depth -1
-					 */
-	unsigned short  words76_79[4];	/* reserved words 76-79 */
-	unsigned short  major_rev_num;	/* (word 80) */
-	unsigned short  minor_rev_num;	/* (word 81) */
-	unsigned short  command_set_1;	/* (word 82) supported
-					 * 15:	Obsolete
-					 * 14:	NOP command
-					 * 13:	READ_BUFFER
-					 * 12:	WRITE_BUFFER
-					 * 11:	Obsolete
-					 * 10:	Host Protected Area
-					 *  9:	DEVICE Reset
-					 *  8:	SERVICE Interrupt
-					 *  7:	Release Interrupt
-					 *  6:	look-ahead
-					 *  5:	write cache
-					 *  4:	PACKET Command
-					 *  3:	Power Management Feature Set
-					 *  2:	Removable Feature Set
-					 *  1:	Security Feature Set
-					 *  0:	SMART Feature Set
-					 */
-	unsigned short  command_set_2;	/* (word 83)
-					 * 15:	Shall be ZERO
-					 * 14:	Shall be ONE
-					 * 13:	FLUSH CACHE EXT
-					 * 12:	FLUSH CACHE
-					 * 11:	Device Configuration Overlay
-					 * 10:	48-bit Address Feature Set
-					 *  9:	Automatic Acoustic Management
-					 *  8:	SET MAX security
-					 *  7:	reserved 1407DT PARTIES
-					 *  6:	SetF sub-command Power-Up
-					 *  5:	Power-Up in Standby Feature Set
-					 *  4:	Removable Media Notification
-					 *  3:	APM Feature Set
-					 *  2:	CFA Feature Set
-					 *  1:	READ/WRITE DMA QUEUED
-					 *  0:	Download MicroCode
-					 */
-	unsigned short  cfsse;		/* (word 84)
-					 * cmd set-feature supported extensions
-					 * 15:	Shall be ZERO
-					 * 14:	Shall be ONE
-					 * 13:6	reserved
-					 *  5:	General Purpose Logging
-					 *  4:	Streaming Feature Set
-					 *  3:	Media Card Pass Through
-					 *  2:	Media Serial Number Valid
-					 *  1:	SMART selt-test supported
-					 *  0:	SMART error logging
-					 */
-	unsigned short  cfs_enable_1;	/* (word 85)
-					 * command set-feature enabled
-					 * 15:	Obsolete
-					 * 14:	NOP command
-					 * 13:	READ_BUFFER
-					 * 12:	WRITE_BUFFER
-					 * 11:	Obsolete
-					 * 10:	Host Protected Area
-					 *  9:	DEVICE Reset
-					 *  8:	SERVICE Interrupt
-					 *  7:	Release Interrupt
-					 *  6:	look-ahead
-					 *  5:	write cache
-					 *  4:	PACKET Command
-					 *  3:	Power Management Feature Set
-					 *  2:	Removable Feature Set
-					 *  1:	Security Feature Set
-					 *  0:	SMART Feature Set
-					 */
-	unsigned short  cfs_enable_2;	/* (word 86)
-					 * command set-feature enabled
-					 * 15:	Shall be ZERO
-					 * 14:	Shall be ONE
-					 * 13:	FLUSH CACHE EXT
-					 * 12:	FLUSH CACHE
-					 * 11:	Device Configuration Overlay
-					 * 10:	48-bit Address Feature Set
-					 *  9:	Automatic Acoustic Management
-					 *  8:	SET MAX security
-					 *  7:	reserved 1407DT PARTIES
-					 *  6:	SetF sub-command Power-Up
-					 *  5:	Power-Up in Standby Feature Set
-					 *  4:	Removable Media Notification
-					 *  3:	APM Feature Set
-					 *  2:	CFA Feature Set
-					 *  1:	READ/WRITE DMA QUEUED
-					 *  0:	Download MicroCode
-					 */
-	unsigned short  csf_default;	/* (word 87)
-					 * command set-feature default
-					 * 15:	Shall be ZERO
-					 * 14:	Shall be ONE
-					 * 13:6	reserved
-					 *  5:	General Purpose Logging enabled
-					 *  4:	Valid CONFIGURE STREAM executed
-					 *  3:	Media Card Pass Through enabled
-					 *  2:	Media Serial Number Valid
-					 *  1:	SMART selt-test supported
-					 *  0:	SMART error logging
-					 */
-	unsigned short  dma_ultra;	/* (word 88) */
-	unsigned short	trseuc;		/* time required for security erase */
-	unsigned short	trsEuc;		/* time required for enhanced erase */
-	unsigned short	CurAPMvalues;	/* current APM values */
-	unsigned short	mprc;		/* master password revision code */
-	unsigned short	hw_config;	/* hardware config (word 93)
-					 * 15:	Shall be ZERO
-					 * 14:	Shall be ONE
-					 * 13:
-					 * 12:
-					 * 11:
-					 * 10:
-					 *  9:
-					 *  8:
-					 *  7:
-					 *  6:
-					 *  5:
-					 *  4:
-					 *  3:
-					 *  2:
-					 *  1:
-					 *  0:	Shall be ONE
-					 */
-	unsigned short	acoustic;	/* (word 94)
-					 * 15:8	Vendor's recommended value
-					 *  7:0	current value
-					 */
-	unsigned short	msrqs;		/* min stream request size */
-	unsigned short	sxfert;		/* stream transfer time */
-	unsigned short	sal;		/* stream access latency */
-	unsigned int	spg;		/* stream performance granularity */
-	unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
-	unsigned short	words104_125[22];/* reserved words 104-125 */
-	unsigned short	last_lun;	/* (word 126) */
-	unsigned short	word127;	/* (word 127) Feature Set
-					 * Removable Media Notification
-					 * 15:2	reserved
-					 *  1:0	00 = not supported
-					 *	01 = supported
-					 *	10 = reserved
-					 *	11 = reserved
-					 */
-	unsigned short	dlf;		/* (word 128)
-					 * device lock function
-					 * 15:9	reserved
-					 *  8	security level 1:max 0:high
-					 *  7:6	reserved
-					 *  5	enhanced erase
-					 *  4	expire
-					 *  3	frozen
-					 *  2	locked
-					 *  1	en/disabled
-					 *  0	capability
-					 */
-	unsigned short  csfo;		/*  (word 129)
-					 * current set features options
-					 * 15:4	reserved
-					 *  3:	auto reassign
-					 *  2:	reverting
-					 *  1:	read-look-ahead
-					 *  0:	write cache
-					 */
-	unsigned short	words130_155[26];/* reserved vendor words 130-155 */
-	unsigned short	word156;	/* reserved vendor word 156 */
-	unsigned short	words157_159[3];/* reserved vendor words 157-159 */
-	unsigned short	cfa_power;	/* (word 160) CFA Power Mode
-					 * 15 word 160 supported
-					 * 14 reserved
-					 * 13
-					 * 12
-					 * 11:0
-					 */
-	unsigned short	words161_175[15];/* Reserved for CFA */
-	unsigned short	words176_205[30];/* Current Media Serial Number */
-	unsigned short	words206_254[49];/* reserved words 206-254 */
-	unsigned short	integrity_word;	/* (word 255)
-					 * 15:8 Checksum
-					 *  7:0 Signature
-					 */
-};
-#endif /* __KERNEL__ */
-
-/*
- * IDE "nice" flags. These are used on a per drive basis to determine
- * when to be nice and give more bandwidth to the other devices which
- * share the same IDE bus.
- */
-#define IDE_NICE_DSC_OVERLAP	(0)	/* per the DSC overlap protocol */
-#define IDE_NICE_ATAPI_OVERLAP	(1)	/* not supported yet */
-#define IDE_NICE_1		(3)	/* when probably won't affect us much */
-#ifndef __KERNEL__
-#define IDE_NICE_0		(2)	/* when sure that it won't affect us */
-#define IDE_NICE_2		(4)	/* when we know it's on our expense */
-#endif
-
-#endif	/* _LINUX_HDREG_H */
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 7e1f37db7582..c076041a069e 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -1,12 +1,8 @@
-#ifndef __HID_H
-#define __HID_H
-
 /*
  *  Copyright (c) 1999 Andreas Gal
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  *  Copyright (c) 2006-2007 Jiri Kosina
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,43 +22,9 @@
  * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */
+#ifndef __HID_H
+#define __HID_H
 
-/*
- * USB HID (Human Interface Device) interface class code
- */
-
-#define USB_INTERFACE_CLASS_HID		3
-
-/*
- * USB HID interface subclass and protocol codes
- */
-
-#define USB_INTERFACE_SUBCLASS_BOOT	1
-#define USB_INTERFACE_PROTOCOL_KEYBOARD	1
-#define USB_INTERFACE_PROTOCOL_MOUSE	2
-
-/*
- * HID class requests
- */
-
-#define HID_REQ_GET_REPORT		0x01
-#define HID_REQ_GET_IDLE		0x02
-#define HID_REQ_GET_PROTOCOL		0x03
-#define HID_REQ_SET_REPORT		0x09
-#define HID_REQ_SET_IDLE		0x0A
-#define HID_REQ_SET_PROTOCOL		0x0B
-
-/*
- * HID class descriptor types
- */
-
-#define HID_DT_HID			(USB_TYPE_CLASS | 0x01)
-#define HID_DT_REPORT			(USB_TYPE_CLASS | 0x02)
-#define HID_DT_PHYSICAL			(USB_TYPE_CLASS | 0x03)
-
-#define HID_MAX_DESCRIPTOR_SIZE		4096
-
-#ifdef __KERNEL__
 
 #include <linux/types.h>
 #include <linux/slab.h>
@@ -73,6 +35,7 @@
 #include <linux/input.h>
 #include <linux/semaphore.h>
 #include <linux/power_supply.h>
+#include <uapi/linux/hid.h>
 
 /*
  * We parse each description item into this structure. Short items data
@@ -943,7 +906,4 @@ do {									\
 #define hid_dbg(hid, fmt, arg...)			\
 	dev_dbg(&(hid)->dev, fmt, ##arg)
 
-#endif /* __KERNEL__ */
-
 #endif
-
diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h
index a3f481a3063b..a5dd8148660b 100644
--- a/include/linux/hiddev.h
+++ b/include/linux/hiddev.h
@@ -1,12 +1,8 @@
-#ifndef _HIDDEV_H
-#define _HIDDEV_H
-
 /*
  *  Copyright (c) 1999-2000 Vojtech Pavlik
  *
  *  Sponsored by SuSE
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,190 +22,11 @@
  * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
  * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
  */
+#ifndef _HIDDEV_H
+#define _HIDDEV_H
 
-#include <linux/types.h>
-
-/*
- * The event structure itself
- */
-
-struct hiddev_event {
-	unsigned hid;
-	signed int value;
-};
-
-struct hiddev_devinfo {
-	__u32 bustype;
-	__u32 busnum;
-	__u32 devnum;
-	__u32 ifnum;
-	__s16 vendor;
-	__s16 product;
-	__s16 version;
-	__u32 num_applications;
-};
-
-struct hiddev_collection_info {
-	__u32 index;
-	__u32 type;
-	__u32 usage;
-	__u32 level;
-};
-
-#define HID_STRING_SIZE 256
-struct hiddev_string_descriptor {
-	__s32 index;
-	char value[HID_STRING_SIZE];
-};
-
-struct hiddev_report_info {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 num_fields;
-};
-
-/* To do a GUSAGE/SUSAGE, fill in at least usage_code,  report_type and 
- * report_id.  Set report_id to REPORT_ID_UNKNOWN if the rest of the fields 
- * are unknown.  Otherwise use a usage_ref struct filled in from a previous 
- * successful GUSAGE call to save time.  To actually send a value to the
- * device, perform a SUSAGE first, followed by a SREPORT.  An INITREPORT or a
- * GREPORT isn't necessary for a GUSAGE to return valid data.
- */
-#define HID_REPORT_ID_UNKNOWN 0xffffffff
-#define HID_REPORT_ID_FIRST   0x00000100
-#define HID_REPORT_ID_NEXT    0x00000200
-#define HID_REPORT_ID_MASK    0x000000ff
-#define HID_REPORT_ID_MAX     0x000000ff
-
-#define HID_REPORT_TYPE_INPUT	1
-#define HID_REPORT_TYPE_OUTPUT	2
-#define HID_REPORT_TYPE_FEATURE	3
-#define HID_REPORT_TYPE_MIN     1
-#define HID_REPORT_TYPE_MAX     3
-
-struct hiddev_field_info {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 field_index;
-	__u32 maxusage;
-	__u32 flags;
-	__u32 physical;		/* physical usage for this field */
-	__u32 logical;		/* logical usage for this field */
-	__u32 application;		/* application usage for this field */
-	__s32 logical_minimum;
-	__s32 logical_maximum;
-	__s32 physical_minimum;
-	__s32 physical_maximum;
-	__u32 unit_exponent;
-	__u32 unit;
-};
-
-/* Fill in report_type, report_id and field_index to get the information on a
- * field.
- */
-#define HID_FIELD_CONSTANT		0x001
-#define HID_FIELD_VARIABLE		0x002
-#define HID_FIELD_RELATIVE		0x004
-#define HID_FIELD_WRAP			0x008	
-#define HID_FIELD_NONLINEAR		0x010
-#define HID_FIELD_NO_PREFERRED		0x020
-#define HID_FIELD_NULL_STATE		0x040
-#define HID_FIELD_VOLATILE		0x080
-#define HID_FIELD_BUFFERED_BYTE		0x100
-
-struct hiddev_usage_ref {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 field_index;
-	__u32 usage_index;
-	__u32 usage_code;
-	__s32 value;
-};
-
-/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
- * It really manifests itself as setting the value of consecutive usages */
-#define HID_MAX_MULTI_USAGES 1024
-struct hiddev_usage_ref_multi {
-	struct hiddev_usage_ref uref;
-	__u32 num_values;
-	__s32 values[HID_MAX_MULTI_USAGES];
-};
-
-/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
- * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
- * been sent by the device 
- */
-#define HID_FIELD_INDEX_NONE 0xffffffff
-
-/*
- * Protocol version.
- */
-
-#define HID_VERSION		0x010004
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-#define HIDIOCGVERSION		_IOR('H', 0x01, int)
-#define HIDIOCAPPLICATION	_IO('H', 0x02)
-#define HIDIOCGDEVINFO		_IOR('H', 0x03, struct hiddev_devinfo)
-#define HIDIOCGSTRING		_IOR('H', 0x04, struct hiddev_string_descriptor)
-#define HIDIOCINITREPORT	_IO('H', 0x05)
-#define HIDIOCGNAME(len)	_IOC(_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGREPORT		_IOW('H', 0x07, struct hiddev_report_info)
-#define HIDIOCSREPORT		_IOW('H', 0x08, struct hiddev_report_info)
-#define HIDIOCGREPORTINFO	_IOWR('H', 0x09, struct hiddev_report_info)
-#define HIDIOCGFIELDINFO	_IOWR('H', 0x0A, struct hiddev_field_info)
-#define HIDIOCGUSAGE		_IOWR('H', 0x0B, struct hiddev_usage_ref)
-#define HIDIOCSUSAGE		_IOW('H', 0x0C, struct hiddev_usage_ref)
-#define HIDIOCGUCODE		_IOWR('H', 0x0D, struct hiddev_usage_ref)
-#define HIDIOCGFLAG		_IOR('H', 0x0E, int)
-#define HIDIOCSFLAG		_IOW('H', 0x0F, int)
-#define HIDIOCGCOLLECTIONINDEX	_IOW('H', 0x10, struct hiddev_usage_ref)
-#define HIDIOCGCOLLECTIONINFO	_IOWR('H', 0x11, struct hiddev_collection_info)
-#define HIDIOCGPHYS(len)	_IOC(_IOC_READ, 'H', 0x12, len)
-
-/* For writing/reading to multiple/consecutive usages */
-#define HIDIOCGUSAGES		_IOWR('H', 0x13, struct hiddev_usage_ref_multi)
-#define HIDIOCSUSAGES		_IOW('H', 0x14, struct hiddev_usage_ref_multi)
-
-/* 
- * Flags to be used in HIDIOCSFLAG
- */
-#define HIDDEV_FLAG_UREF	0x1
-#define HIDDEV_FLAG_REPORT	0x2
-#define HIDDEV_FLAGS		0x3
-
-/* To traverse the input report descriptor info for a HID device, perform the 
- * following:
- *
- * rinfo.report_type = HID_REPORT_TYPE_INPUT;
- * rinfo.report_id = HID_REPORT_ID_FIRST;
- * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- *
- * while (ret >= 0) {
- * 	for (i = 0; i < rinfo.num_fields; i++) {
- * 		finfo.report_type = rinfo.report_type;
- * 		finfo.report_id = rinfo.report_id;
- * 		finfo.field_index = i;
- * 		ioctl(fd, HIDIOCGFIELDINFO, &finfo);
- * 		for (j = 0; j < finfo.maxusage; j++) {
- * 			uref.report_type = rinfo.report_type;
- * 			uref.report_id = rinfo.report_id;
- * 			uref.field_index = i;
- * 			uref.usage_index = j;
- * 			ioctl(fd, HIDIOCGUCODE, &uref);
- * 			ioctl(fd, HIDIOCGUSAGE, &uref);
- * 		}
- * 	}
- * 	rinfo.report_id |= HID_REPORT_ID_NEXT;
- * 	ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- * }
- */
-
+#include <uapi/linux/hiddev.h>
 
-#ifdef __KERNEL__
 
 /*
  * In-kernel definitions.
@@ -237,4 +54,3 @@ static inline void hiddev_report_event(struct hid_device *hid, struct hid_report
 #endif
 
 #endif
-#endif
diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h
index 45e9fcb8d877..2451662c728a 100644
--- a/include/linux/hidraw.h
+++ b/include/linux/hidraw.h
@@ -1,10 +1,6 @@
-#ifndef _HIDRAW_H
-#define _HIDRAW_H
-
 /*
  *  Copyright (c) 2007 Jiri Kosina
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -14,39 +10,11 @@
  * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  */
+#ifndef _HIDRAW_H
+#define _HIDRAW_H
 
-#include <linux/hid.h>
-#include <linux/types.h>
-
-struct hidraw_report_descriptor {
-	__u32 size;
-	__u8 value[HID_MAX_DESCRIPTOR_SIZE];
-};
-
-struct hidraw_devinfo {
-	__u32 bustype;
-	__s16 vendor;
-	__s16 product;
-};
-
-/* ioctl interface */
-#define HIDIOCGRDESCSIZE	_IOR('H', 0x01, int)
-#define HIDIOCGRDESC		_IOR('H', 0x02, struct hidraw_report_descriptor)
-#define HIDIOCGRAWINFO		_IOR('H', 0x03, struct hidraw_devinfo)
-#define HIDIOCGRAWNAME(len)     _IOC(_IOC_READ, 'H', 0x04, len)
-#define HIDIOCGRAWPHYS(len)     _IOC(_IOC_READ, 'H', 0x05, len)
-/* The first byte of SFEATURE and GFEATURE is the report number */
-#define HIDIOCSFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
-
-#define HIDRAW_FIRST_MINOR 0
-#define HIDRAW_MAX_DEVICES 64
-/* number of reports to buffer */
-#define HIDRAW_BUFFER_SIZE 64
-
+#include <uapi/linux/hidraw.h>
 
-/* kernel-only API declarations */
-#ifdef __KERNEL__
 
 struct hidraw {
 	unsigned int minor;
@@ -88,5 +56,3 @@ static inline void hidraw_disconnect(struct hid_device *hid) { }
 #endif
 
 #endif
-
-#endif
diff --git a/include/linux/hpet.h b/include/linux/hpet.h
index 219ca4f6bea6..9427ab4e01c3 100644
--- a/include/linux/hpet.h
+++ b/include/linux/hpet.h
@@ -1,9 +1,8 @@
 #ifndef	__HPET__
 #define	__HPET__ 1
 
-#include <linux/compiler.h>
+#include <uapi/linux/hpet.h>
 
-#ifdef __KERNEL__
 
 /*
  * Offsets into HPET Registers
@@ -108,24 +107,4 @@ static inline void hpet_reserve_timer(struct hpet_data *hd, int timer)
 
 int hpet_alloc(struct hpet_data *);
 
-#endif /* __KERNEL__ */
-
-struct hpet_info {
-	unsigned long hi_ireqfreq;	/* Hz */
-	unsigned long hi_flags;	/* information */
-	unsigned short hi_hpet;
-	unsigned short hi_timer;
-};
-
-#define HPET_INFO_PERIODIC	0x0010	/* periodic-capable comparator */
-
-#define	HPET_IE_ON	_IO('h', 0x01)	/* interrupt on */
-#define	HPET_IE_OFF	_IO('h', 0x02)	/* interrupt off */
-#define	HPET_INFO	_IOR('h', 0x03, struct hpet_info)
-#define	HPET_EPI	_IO('h', 0x04)	/* enable periodic */
-#define	HPET_DPI	_IO('h', 0x05)	/* disable periodic */
-#define	HPET_IRQFREQ	_IOW('h', 0x6, unsigned long)	/* IRQFREQ usec */
-
-#define MAX_HPET_TBS	8		/* maximum hpet timer blocks */
-
 #endif				/* !__HPET__ */
diff --git a/include/linux/hysdn_if.h b/include/linux/hysdn_if.h
deleted file mode 100644
index 00236ae3b04e..000000000000
--- a/include/linux/hysdn_if.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* $Id: hysdn_if.h,v 1.1.8.3 2001/09/23 22:25:05 kai Exp $
- *
- * Linux driver for HYSDN cards
- * ioctl definitions shared by hynetmgr and driver.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-/****************/
-/* error values */
-/****************/
-#define ERR_NONE             0 /* no error occurred */
-#define ERR_ALREADY_BOOT  1000 /* we are already booting */
-#define EPOF_BAD_MAGIC    1001 /* bad magic in POF header */
-#define ERR_BOARD_DPRAM   1002 /* board DPRAM failed */
-#define EPOF_INTERNAL     1003 /* internal POF handler error */
-#define EPOF_BAD_IMG_SIZE 1004 /* POF boot image size invalid */
-#define ERR_BOOTIMG_FAIL  1005 /* 1. stage boot image did not start */
-#define ERR_BOOTSEQ_FAIL  1006 /* 2. stage boot seq handshake timeout */
-#define ERR_POF_TIMEOUT   1007 /* timeout waiting for card pof ready */
-#define ERR_NOT_BOOTED    1008 /* operation only allowed when booted */
-#define ERR_CONF_LONG     1009 /* conf line is too long */ 
-#define ERR_INV_CHAN      1010 /* invalid channel number */ 
-#define ERR_ASYNC_TIME    1011 /* timeout sending async data */ 
-
-
-
-
diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h
index 8a7406b2114d..79727144c5cd 100644
--- a/include/linux/i2c-dev.h
+++ b/include/linux/i2c-dev.h
@@ -19,57 +19,10 @@
     Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
     MA 02110-1301 USA.
 */
-
 #ifndef _LINUX_I2C_DEV_H
 #define _LINUX_I2C_DEV_H
 
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-/* /dev/i2c-X ioctl commands.  The ioctl's parameter is always an
- * unsigned long, except for:
- *	- I2C_FUNCS, takes pointer to an unsigned long
- *	- I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
- *	- I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
- */
-#define I2C_RETRIES	0x0701	/* number of times a device address should
-				   be polled when not acknowledging */
-#define I2C_TIMEOUT	0x0702	/* set timeout in units of 10 ms */
-
-/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
- * are NOT supported! (due to code brokenness)
- */
-#define I2C_SLAVE	0x0703	/* Use this slave address */
-#define I2C_SLAVE_FORCE	0x0706	/* Use this slave address, even if it
-				   is already in use by a driver! */
-#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit */
-
-#define I2C_FUNCS	0x0705	/* Get the adapter functionality mask */
-
-#define I2C_RDWR	0x0707	/* Combined R/W transfer (one STOP only) */
-
-#define I2C_PEC		0x0708	/* != 0 to use PEC with SMBus */
-#define I2C_SMBUS	0x0720	/* SMBus transfer */
+#include <uapi/linux/i2c-dev.h>
 
-
-/* This is the structure as used in the I2C_SMBUS ioctl call */
-struct i2c_smbus_ioctl_data {
-	__u8 read_write;
-	__u8 command;
-	__u32 size;
-	union i2c_smbus_data __user *data;
-};
-
-/* This is the structure as used in the I2C_RDWR ioctl call */
-struct i2c_rdwr_ioctl_data {
-	struct i2c_msg __user *msgs;	/* pointers to i2c_msgs */
-	__u32 nmsgs;			/* number of i2c_msgs */
-};
-
-#define  I2C_RDRW_IOCTL_MAX_MSGS	42
-
-#ifdef __KERNEL__
 #define I2C_MAJOR	89		/* Device major number		*/
-#endif
-
 #endif /* _LINUX_I2C_DEV_H */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 94aed0c85bb0..800de224336b 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -23,18 +23,16 @@
 
 /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
    Frodo Looijaard <frodol@dds.nl> */
-
 #ifndef _LINUX_I2C_H
 #define _LINUX_I2C_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/mod_devicetable.h>
 #include <linux/device.h>	/* for struct device */
 #include <linux/sched.h>	/* for completion */
 #include <linux/mutex.h>
 #include <linux/of.h>		/* for struct device_node */
 #include <linux/swab.h>		/* for swab16 */
+#include <uapi/linux/i2c.h>
 
 extern struct bus_type i2c_bus_type;
 extern struct device_type i2c_adapter_type;
@@ -503,125 +501,4 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap)
 			i2c_del_driver)
 
 #endif /* I2C */
-#endif /* __KERNEL__ */
-
-/**
- * struct i2c_msg - an I2C transaction segment beginning with START
- * @addr: Slave address, either seven or ten bits.  When this is a ten
- *	bit address, I2C_M_TEN must be set in @flags and the adapter
- *	must support I2C_FUNC_10BIT_ADDR.
- * @flags: I2C_M_RD is handled by all adapters.  No other flags may be
- *	provided unless the adapter exported the relevant I2C_FUNC_*
- *	flags through i2c_check_functionality().
- * @len: Number of data bytes in @buf being read from or written to the
- *	I2C slave address.  For read transactions where I2C_M_RECV_LEN
- *	is set, the caller guarantees that this buffer can hold up to
- *	32 bytes in addition to the initial length byte sent by the
- *	slave (plus, if used, the SMBus PEC); and this value will be
- *	incremented by the number of block data bytes received.
- * @buf: The buffer into which data is read, or from which it's written.
- *
- * An i2c_msg is the low level representation of one segment of an I2C
- * transaction.  It is visible to drivers in the @i2c_transfer() procedure,
- * to userspace from i2c-dev, and to I2C adapter drivers through the
- * @i2c_adapter.@master_xfer() method.
- *
- * Except when I2C "protocol mangling" is used, all I2C adapters implement
- * the standard rules for I2C transactions.  Each transaction begins with a
- * START.  That is followed by the slave address, and a bit encoding read
- * versus write.  Then follow all the data bytes, possibly including a byte
- * with SMBus PEC.  The transfer terminates with a NAK, or when all those
- * bytes have been transferred and ACKed.  If this is the last message in a
- * group, it is followed by a STOP.  Otherwise it is followed by the next
- * @i2c_msg transaction segment, beginning with a (repeated) START.
- *
- * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
- * passing certain @flags may have changed those standard protocol behaviors.
- * Those flags are only for use with broken/nonconforming slaves, and with
- * adapters which are known to support the specific mangling options they
- * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
- */
-struct i2c_msg {
-	__u16 addr;	/* slave address			*/
-	__u16 flags;
-#define I2C_M_TEN		0x0010	/* this is a ten bit chip address */
-#define I2C_M_RD		0x0001	/* read data, from slave to master */
-#define I2C_M_STOP		0x8000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NOSTART		0x4000	/* if I2C_FUNC_NOSTART */
-#define I2C_M_REV_DIR_ADDR	0x2000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_IGNORE_NAK	0x1000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NO_RD_ACK		0x0800	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_RECV_LEN		0x0400	/* length will be first received byte */
-	__u16 len;		/* msg length				*/
-	__u8 *buf;		/* pointer to msg data			*/
-};
-
-/* To determine what functionality is present */
-
-#define I2C_FUNC_I2C			0x00000001
-#define I2C_FUNC_10BIT_ADDR		0x00000002
-#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_IGNORE_NAK etc. */
-#define I2C_FUNC_SMBUS_PEC		0x00000008
-#define I2C_FUNC_NOSTART		0x00000010 /* I2C_M_NOSTART */
-#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_QUICK		0x00010000
-#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000
-#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000
-#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000
-#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
-#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
-#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
-
-#define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
-					 I2C_FUNC_SMBUS_WRITE_BYTE)
-#define I2C_FUNC_SMBUS_BYTE_DATA	(I2C_FUNC_SMBUS_READ_BYTE_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
-#define I2C_FUNC_SMBUS_WORD_DATA	(I2C_FUNC_SMBUS_READ_WORD_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_WORD_DATA)
-#define I2C_FUNC_SMBUS_BLOCK_DATA	(I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
-#define I2C_FUNC_SMBUS_I2C_BLOCK	(I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
-					 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
-
-#define I2C_FUNC_SMBUS_EMUL		(I2C_FUNC_SMBUS_QUICK | \
-					 I2C_FUNC_SMBUS_BYTE | \
-					 I2C_FUNC_SMBUS_BYTE_DATA | \
-					 I2C_FUNC_SMBUS_WORD_DATA | \
-					 I2C_FUNC_SMBUS_PROC_CALL | \
-					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
-					 I2C_FUNC_SMBUS_I2C_BLOCK | \
-					 I2C_FUNC_SMBUS_PEC)
-
-/*
- * Data for SMBus Messages
- */
-#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */
-union i2c_smbus_data {
-	__u8 byte;
-	__u16 word;
-	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
-			       /* and one more for user-space compatibility */
-};
-
-/* i2c_smbus_xfer read or write markers */
-#define I2C_SMBUS_READ	1
-#define I2C_SMBUS_WRITE	0
-
-/* SMBus transaction types (size parameter in the above functions)
-   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
-#define I2C_SMBUS_QUICK		    0
-#define I2C_SMBUS_BYTE		    1
-#define I2C_SMBUS_BYTE_DATA	    2
-#define I2C_SMBUS_WORD_DATA	    3
-#define I2C_SMBUS_PROC_CALL	    4
-#define I2C_SMBUS_BLOCK_DATA	    5
-#define I2C_SMBUS_I2C_BLOCK_BROKEN  6
-#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
-#define I2C_SMBUS_I2C_BLOCK_DATA    8
-
 #endif /* _LINUX_I2C_H */
diff --git a/include/linux/i2o-dev.h b/include/linux/i2o-dev.h
deleted file mode 100644
index a8093bfec3a6..000000000000
--- a/include/linux/i2o-dev.h
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * I2O user space accessible structures/APIs
- *
- * (c) Copyright 1999, 2000 Red Hat Software
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- *************************************************************************
- *
- * This header file defines the I2O APIs that are available to both
- * the kernel and user level applications.  Kernel specific structures
- * are defined in i2o_osm. OSMs should include _only_ i2o_osm.h which
- * automatically includes this file.
- *
- */
-
-#ifndef _I2O_DEV_H
-#define _I2O_DEV_H
-
-/* How many controllers are we allowing */
-#define MAX_I2O_CONTROLLERS	32
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/*
- * I2O Control IOCTLs and structures
- */
-#define I2O_MAGIC_NUMBER	'i'
-#define I2OGETIOPS		_IOR(I2O_MAGIC_NUMBER,0,__u8[MAX_I2O_CONTROLLERS])
-#define I2OHRTGET		_IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct)
-#define I2OLCTGET		_IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct)
-#define I2OPARMSET		_IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget)
-#define I2OPARMGET		_IOWR(I2O_MAGIC_NUMBER,4,struct i2o_cmd_psetget)
-#define I2OSWDL 		_IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer)
-#define I2OSWUL 		_IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer)
-#define I2OSWDEL		_IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer)
-#define I2OVALIDATE		_IOR(I2O_MAGIC_NUMBER,8,__u32)
-#define I2OHTML 		_IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html)
-#define I2OEVTREG		_IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id)
-#define I2OEVTGET		_IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info)
-#define I2OPASSTHRU		_IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru)
-#define I2OPASSTHRU32		_IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru32)
-
-struct i2o_cmd_passthru32 {
-	unsigned int iop;	/* IOP unit number */
-	__u32 msg;		/* message */
-};
-
-struct i2o_cmd_passthru {
-	unsigned int iop;	/* IOP unit number */
-	void __user *msg;	/* message */
-};
-
-struct i2o_cmd_hrtlct {
-	unsigned int iop;	/* IOP unit number */
-	void __user *resbuf;	/* Buffer for result */
-	unsigned int __user *reslen;	/* Buffer length in bytes */
-};
-
-struct i2o_cmd_psetget {
-	unsigned int iop;	/* IOP unit number */
-	unsigned int tid;	/* Target device TID */
-	void __user *opbuf;	/* Operation List buffer */
-	unsigned int oplen;	/* Operation List buffer length in bytes */
-	void __user *resbuf;	/* Result List buffer */
-	unsigned int __user *reslen;	/* Result List buffer length in bytes */
-};
-
-struct i2o_sw_xfer {
-	unsigned int iop;	/* IOP unit number */
-	unsigned char flags;	/* Flags field */
-	unsigned char sw_type;	/* Software type */
-	unsigned int sw_id;	/* Software ID */
-	void __user *buf;	/* Pointer to software buffer */
-	unsigned int __user *swlen;	/* Length of software data */
-	unsigned int __user *maxfrag;	/* Maximum fragment count */
-	unsigned int __user *curfrag;	/* Current fragment count */
-};
-
-struct i2o_html {
-	unsigned int iop;	/* IOP unit number */
-	unsigned int tid;	/* Target device ID */
-	unsigned int page;	/* HTML page */
-	void __user *resbuf;	/* Buffer for reply HTML page */
-	unsigned int __user *reslen;	/* Length in bytes of reply buffer */
-	void __user *qbuf;	/* Pointer to HTTP query string */
-	unsigned int qlen;	/* Length in bytes of query string buffer */
-};
-
-#define I2O_EVT_Q_LEN 32
-
-struct i2o_evt_id {
-	unsigned int iop;
-	unsigned int tid;
-	unsigned int evt_mask;
-};
-
-/* Event data size = frame size - message header + evt indicator */
-#define I2O_EVT_DATA_SIZE 88
-
-struct i2o_evt_info {
-	struct i2o_evt_id id;
-	unsigned char evt_data[I2O_EVT_DATA_SIZE];
-	unsigned int data_size;
-};
-
-struct i2o_evt_get {
-	struct i2o_evt_info info;
-	int pending;
-	int lost;
-};
-
-typedef struct i2o_sg_io_hdr {
-	unsigned int flags;	/* see I2O_DPT_SG_IO_FLAGS */
-} i2o_sg_io_hdr_t;
-
-/**************************************************************************
- * HRT related constants and structures
- **************************************************************************/
-#define I2O_BUS_LOCAL	0
-#define I2O_BUS_ISA	1
-#define I2O_BUS_EISA	2
-/* was  I2O_BUS_MCA	3 */
-#define I2O_BUS_PCI	4
-#define I2O_BUS_PCMCIA	5
-#define I2O_BUS_NUBUS	6
-#define I2O_BUS_CARDBUS 7
-#define I2O_BUS_UNKNOWN 0x80
-
-typedef struct _i2o_pci_bus {
-	__u8 PciFunctionNumber;
-	__u8 PciDeviceNumber;
-	__u8 PciBusNumber;
-	__u8 reserved;
-	__u16 PciVendorID;
-	__u16 PciDeviceID;
-} i2o_pci_bus;
-
-typedef struct _i2o_local_bus {
-	__u16 LbBaseIOPort;
-	__u16 reserved;
-	__u32 LbBaseMemoryAddress;
-} i2o_local_bus;
-
-typedef struct _i2o_isa_bus {
-	__u16 IsaBaseIOPort;
-	__u8 CSN;
-	__u8 reserved;
-	__u32 IsaBaseMemoryAddress;
-} i2o_isa_bus;
-
-typedef struct _i2o_eisa_bus_info {
-	__u16 EisaBaseIOPort;
-	__u8 reserved;
-	__u8 EisaSlotNumber;
-	__u32 EisaBaseMemoryAddress;
-} i2o_eisa_bus;
-
-typedef struct _i2o_mca_bus {
-	__u16 McaBaseIOPort;
-	__u8 reserved;
-	__u8 McaSlotNumber;
-	__u32 McaBaseMemoryAddress;
-} i2o_mca_bus;
-
-typedef struct _i2o_other_bus {
-	__u16 BaseIOPort;
-	__u16 reserved;
-	__u32 BaseMemoryAddress;
-} i2o_other_bus;
-
-typedef struct _i2o_hrt_entry {
-	__u32 adapter_id;
-	__u32 parent_tid:12;
-	__u32 state:4;
-	__u32 bus_num:8;
-	__u32 bus_type:8;
-	union {
-		i2o_pci_bus pci_bus;
-		i2o_local_bus local_bus;
-		i2o_isa_bus isa_bus;
-		i2o_eisa_bus eisa_bus;
-		i2o_mca_bus mca_bus;
-		i2o_other_bus other_bus;
-	} bus;
-} i2o_hrt_entry;
-
-typedef struct _i2o_hrt {
-	__u16 num_entries;
-	__u8 entry_len;
-	__u8 hrt_version;
-	__u32 change_ind;
-	i2o_hrt_entry hrt_entry[1];
-} i2o_hrt;
-
-typedef struct _i2o_lct_entry {
-	__u32 entry_size:16;
-	__u32 tid:12;
-	__u32 reserved:4;
-	__u32 change_ind;
-	__u32 device_flags;
-	__u32 class_id:12;
-	__u32 version:4;
-	__u32 vendor_id:16;
-	__u32 sub_class;
-	__u32 user_tid:12;
-	__u32 parent_tid:12;
-	__u32 bios_info:8;
-	__u8 identity_tag[8];
-	__u32 event_capabilities;
-} i2o_lct_entry;
-
-typedef struct _i2o_lct {
-	__u32 table_size:16;
-	__u32 boot_tid:12;
-	__u32 lct_ver:4;
-	__u32 iop_flags;
-	__u32 change_ind;
-	i2o_lct_entry lct_entry[1];
-} i2o_lct;
-
-typedef struct _i2o_status_block {
-	__u16 org_id;
-	__u16 reserved;
-	__u16 iop_id:12;
-	__u16 reserved1:4;
-	__u16 host_unit_id;
-	__u16 segment_number:12;
-	__u16 i2o_version:4;
-	__u8 iop_state;
-	__u8 msg_type;
-	__u16 inbound_frame_size;
-	__u8 init_code;
-	__u8 reserved2;
-	__u32 max_inbound_frames;
-	__u32 cur_inbound_frames;
-	__u32 max_outbound_frames;
-	char product_id[24];
-	__u32 expected_lct_size;
-	__u32 iop_capabilities;
-	__u32 desired_mem_size;
-	__u32 current_mem_size;
-	__u32 current_mem_base;
-	__u32 desired_io_size;
-	__u32 current_io_size;
-	__u32 current_io_base;
-	__u32 reserved3:24;
-	__u32 cmd_status:8;
-} i2o_status_block;
-
-/* Event indicator mask flags */
-#define I2O_EVT_IND_STATE_CHANGE		0x80000000
-#define I2O_EVT_IND_GENERAL_WARNING		0x40000000
-#define I2O_EVT_IND_CONFIGURATION_FLAG		0x20000000
-#define I2O_EVT_IND_LOCK_RELEASE		0x10000000
-#define I2O_EVT_IND_CAPABILITY_CHANGE		0x08000000
-#define I2O_EVT_IND_DEVICE_RESET		0x04000000
-#define I2O_EVT_IND_EVT_MASK_MODIFIED		0x02000000
-#define I2O_EVT_IND_FIELD_MODIFIED		0x01000000
-#define I2O_EVT_IND_VENDOR_EVT			0x00800000
-#define I2O_EVT_IND_DEVICE_STATE		0x00400000
-
-/* Executive event indicitors */
-#define I2O_EVT_IND_EXEC_RESOURCE_LIMITS	0x00000001
-#define I2O_EVT_IND_EXEC_CONNECTION_FAIL	0x00000002
-#define I2O_EVT_IND_EXEC_ADAPTER_FAULT		0x00000004
-#define I2O_EVT_IND_EXEC_POWER_FAIL		0x00000008
-#define I2O_EVT_IND_EXEC_RESET_PENDING		0x00000010
-#define I2O_EVT_IND_EXEC_RESET_IMMINENT 	0x00000020
-#define I2O_EVT_IND_EXEC_HW_FAIL		0x00000040
-#define I2O_EVT_IND_EXEC_XCT_CHANGE		0x00000080
-#define I2O_EVT_IND_EXEC_NEW_LCT_ENTRY		0x00000100
-#define I2O_EVT_IND_EXEC_MODIFIED_LCT		0x00000200
-#define I2O_EVT_IND_EXEC_DDM_AVAILABILITY	0x00000400
-
-/* Random Block Storage Event Indicators */
-#define I2O_EVT_IND_BSA_VOLUME_LOAD		0x00000001
-#define I2O_EVT_IND_BSA_VOLUME_UNLOAD		0x00000002
-#define I2O_EVT_IND_BSA_VOLUME_UNLOAD_REQ	0x00000004
-#define I2O_EVT_IND_BSA_CAPACITY_CHANGE 	0x00000008
-#define I2O_EVT_IND_BSA_SCSI_SMART		0x00000010
-
-/* Event data for generic events */
-#define I2O_EVT_STATE_CHANGE_NORMAL		0x00
-#define I2O_EVT_STATE_CHANGE_SUSPENDED		0x01
-#define I2O_EVT_STATE_CHANGE_RESTART		0x02
-#define I2O_EVT_STATE_CHANGE_NA_RECOVER 	0x03
-#define I2O_EVT_STATE_CHANGE_NA_NO_RECOVER	0x04
-#define I2O_EVT_STATE_CHANGE_QUIESCE_REQUEST	0x05
-#define I2O_EVT_STATE_CHANGE_FAILED		0x10
-#define I2O_EVT_STATE_CHANGE_FAULTED		0x11
-
-#define I2O_EVT_GEN_WARNING_NORMAL		0x00
-#define I2O_EVT_GEN_WARNING_ERROR_THRESHOLD	0x01
-#define I2O_EVT_GEN_WARNING_MEDIA_FAULT 	0x02
-
-#define I2O_EVT_CAPABILITY_OTHER		0x01
-#define I2O_EVT_CAPABILITY_CHANGED		0x02
-
-#define I2O_EVT_SENSOR_STATE_CHANGED		0x01
-
-/*
- *	I2O classes / subclasses
- */
-
-/*  Class ID and Code Assignments
- *  (LCT.ClassID.Version field)
- */
-#define I2O_CLASS_VERSION_10			0x00
-#define I2O_CLASS_VERSION_11			0x01
-
-/*  Class code names
- *  (from v1.5 Table 6-1 Class Code Assignments.)
- */
-
-#define I2O_CLASS_EXECUTIVE			0x000
-#define I2O_CLASS_DDM				0x001
-#define I2O_CLASS_RANDOM_BLOCK_STORAGE		0x010
-#define I2O_CLASS_SEQUENTIAL_STORAGE		0x011
-#define I2O_CLASS_LAN				0x020
-#define I2O_CLASS_WAN				0x030
-#define I2O_CLASS_FIBRE_CHANNEL_PORT		0x040
-#define I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL	0x041
-#define I2O_CLASS_SCSI_PERIPHERAL		0x051
-#define I2O_CLASS_ATE_PORT			0x060
-#define I2O_CLASS_ATE_PERIPHERAL		0x061
-#define I2O_CLASS_FLOPPY_CONTROLLER		0x070
-#define I2O_CLASS_FLOPPY_DEVICE 		0x071
-#define I2O_CLASS_BUS_ADAPTER			0x080
-#define I2O_CLASS_PEER_TRANSPORT_AGENT		0x090
-#define I2O_CLASS_PEER_TRANSPORT		0x091
-#define	I2O_CLASS_END				0xfff
-
-/*
- *  Rest of 0x092 - 0x09f reserved for peer-to-peer classes
- */
-
-#define I2O_CLASS_MATCH_ANYCLASS		0xffffffff
-
-/*
- *  Subclasses
- */
-
-#define I2O_SUBCLASS_i960			0x001
-#define I2O_SUBCLASS_HDM			0x020
-#define I2O_SUBCLASS_ISM			0x021
-
-/* Operation functions */
-
-#define I2O_PARAMS_FIELD_GET			0x0001
-#define I2O_PARAMS_LIST_GET			0x0002
-#define I2O_PARAMS_MORE_GET			0x0003
-#define I2O_PARAMS_SIZE_GET			0x0004
-#define I2O_PARAMS_TABLE_GET			0x0005
-#define I2O_PARAMS_FIELD_SET			0x0006
-#define I2O_PARAMS_LIST_SET			0x0007
-#define I2O_PARAMS_ROW_ADD			0x0008
-#define I2O_PARAMS_ROW_DELETE			0x0009
-#define I2O_PARAMS_TABLE_CLEAR			0x000A
-
-/*
- * I2O serial number conventions / formats
- * (circa v1.5)
- */
-
-#define I2O_SNFORMAT_UNKNOWN			0
-#define I2O_SNFORMAT_BINARY			1
-#define I2O_SNFORMAT_ASCII			2
-#define I2O_SNFORMAT_UNICODE			3
-#define I2O_SNFORMAT_LAN48_MAC			4
-#define I2O_SNFORMAT_WAN			5
-
-/*
- * Plus new in v2.0 (Yellowstone pdf doc)
- */
-
-#define I2O_SNFORMAT_LAN64_MAC			6
-#define I2O_SNFORMAT_DDM			7
-#define I2O_SNFORMAT_IEEE_REG64 		8
-#define I2O_SNFORMAT_IEEE_REG128		9
-#define I2O_SNFORMAT_UNKNOWN2			0xff
-
-/*
- *	I2O Get Status State values
- */
-
-#define ADAPTER_STATE_INITIALIZING		0x01
-#define ADAPTER_STATE_RESET			0x02
-#define ADAPTER_STATE_HOLD			0x04
-#define ADAPTER_STATE_READY			0x05
-#define ADAPTER_STATE_OPERATIONAL		0x08
-#define ADAPTER_STATE_FAILED			0x10
-#define ADAPTER_STATE_FAULTED			0x11
-
-/*
- *	Software module types
- */
-#define I2O_SOFTWARE_MODULE_IRTOS		0x11
-#define I2O_SOFTWARE_MODULE_IOP_PRIVATE		0x22
-#define I2O_SOFTWARE_MODULE_IOP_CONFIG		0x23
-
-/*
- *	Vendors
- */
-#define I2O_VENDOR_DPT				0x001b
-
-/*
- * DPT / Adaptec specific values for i2o_sg_io_hdr flags.
- */
-#define I2O_DPT_SG_FLAG_INTERPRET		0x00010000
-#define I2O_DPT_SG_FLAG_PHYSICAL		0x00020000
-
-#define I2O_DPT_FLASH_FRAG_SIZE			0x10000
-#define I2O_DPT_FLASH_READ			0x0101
-#define I2O_DPT_FLASH_WRITE			0x0102
-
-#endif				/* _I2O_DEV_H */
diff --git a/include/linux/i8k.h b/include/linux/i8k.h
deleted file mode 100644
index 1c45ba505115..000000000000
--- a/include/linux/i8k.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * i8k.h -- Linux driver for accessing the SMM BIOS on Dell laptops
- *
- * Copyright (C) 2001  Massimo Dal Zotto <dz@debian.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#ifndef _LINUX_I8K_H
-#define _LINUX_I8K_H
-
-#define I8K_PROC		"/proc/i8k"
-#define I8K_PROC_FMT		"1.0"
-
-#define I8K_BIOS_VERSION	_IOR ('i', 0x80, int)	/* broken: meant 4 bytes */
-#define I8K_MACHINE_ID		_IOR ('i', 0x81, int)	/* broken: meant 16 bytes */
-#define I8K_POWER_STATUS	_IOR ('i', 0x82, size_t)
-#define I8K_FN_STATUS		_IOR ('i', 0x83, size_t)
-#define I8K_GET_TEMP		_IOR ('i', 0x84, size_t)
-#define I8K_GET_SPEED		_IOWR('i', 0x85, size_t)
-#define I8K_GET_FAN		_IOWR('i', 0x86, size_t)
-#define I8K_SET_FAN		_IOWR('i', 0x87, size_t)
-
-#define I8K_FAN_LEFT		1
-#define I8K_FAN_RIGHT		0
-#define I8K_FAN_OFF		0
-#define I8K_FAN_LOW		1
-#define I8K_FAN_HIGH		2
-#define I8K_FAN_MAX		I8K_FAN_HIGH
-
-#define I8K_VOL_UP		1
-#define I8K_VOL_DOWN		2
-#define I8K_VOL_MUTE		4
-
-#define I8K_AC			1
-#define I8K_BATTERY		0
-
-#endif
diff --git a/include/linux/icmp.h b/include/linux/icmp.h
index 474f2a51cf0a..efc18490627a 100644
--- a/include/linux/icmp.h
+++ b/include/linux/icmp.h
@@ -17,89 +17,11 @@
 #ifndef _LINUX_ICMP_H
 #define	_LINUX_ICMP_H
 
-#include <linux/types.h>
-
-#define ICMP_ECHOREPLY		0	/* Echo Reply			*/
-#define ICMP_DEST_UNREACH	3	/* Destination Unreachable	*/
-#define ICMP_SOURCE_QUENCH	4	/* Source Quench		*/
-#define ICMP_REDIRECT		5	/* Redirect (change route)	*/
-#define ICMP_ECHO		8	/* Echo Request			*/
-#define ICMP_TIME_EXCEEDED	11	/* Time Exceeded		*/
-#define ICMP_PARAMETERPROB	12	/* Parameter Problem		*/
-#define ICMP_TIMESTAMP		13	/* Timestamp Request		*/
-#define ICMP_TIMESTAMPREPLY	14	/* Timestamp Reply		*/
-#define ICMP_INFO_REQUEST	15	/* Information Request		*/
-#define ICMP_INFO_REPLY		16	/* Information Reply		*/
-#define ICMP_ADDRESS		17	/* Address Mask Request		*/
-#define ICMP_ADDRESSREPLY	18	/* Address Mask Reply		*/
-#define NR_ICMP_TYPES		18
-
-
-/* Codes for UNREACH. */
-#define ICMP_NET_UNREACH	0	/* Network Unreachable		*/
-#define ICMP_HOST_UNREACH	1	/* Host Unreachable		*/
-#define ICMP_PROT_UNREACH	2	/* Protocol Unreachable		*/
-#define ICMP_PORT_UNREACH	3	/* Port Unreachable		*/
-#define ICMP_FRAG_NEEDED	4	/* Fragmentation Needed/DF set	*/
-#define ICMP_SR_FAILED		5	/* Source Route failed		*/
-#define ICMP_NET_UNKNOWN	6
-#define ICMP_HOST_UNKNOWN	7
-#define ICMP_HOST_ISOLATED	8
-#define ICMP_NET_ANO		9
-#define ICMP_HOST_ANO		10
-#define ICMP_NET_UNR_TOS	11
-#define ICMP_HOST_UNR_TOS	12
-#define ICMP_PKT_FILTERED	13	/* Packet filtered */
-#define ICMP_PREC_VIOLATION	14	/* Precedence violation */
-#define ICMP_PREC_CUTOFF	15	/* Precedence cut off */
-#define NR_ICMP_UNREACH		15	/* instead of hardcoding immediate value */
-
-/* Codes for REDIRECT. */
-#define ICMP_REDIR_NET		0	/* Redirect Net			*/
-#define ICMP_REDIR_HOST		1	/* Redirect Host		*/
-#define ICMP_REDIR_NETTOS	2	/* Redirect Net for TOS		*/
-#define ICMP_REDIR_HOSTTOS	3	/* Redirect Host for TOS	*/
-
-/* Codes for TIME_EXCEEDED. */
-#define ICMP_EXC_TTL		0	/* TTL count exceeded		*/
-#define ICMP_EXC_FRAGTIME	1	/* Fragment Reass time exceeded	*/
-
-
-struct icmphdr {
-  __u8		type;
-  __u8		code;
-  __sum16	checksum;
-  union {
-	struct {
-		__be16	id;
-		__be16	sequence;
-	} echo;
-	__be32	gateway;
-	struct {
-		__be16	__unused;
-		__be16	mtu;
-	} frag;
-  } un;
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/icmp.h>
 
 static inline struct icmphdr *icmp_hdr(const struct sk_buff *skb)
 {
 	return (struct icmphdr *)skb_transport_header(skb);
 }
-#endif
-
-/*
- *	constants for (set|get)sockopt
- */
-
-#define ICMP_FILTER			1
-
-struct icmp_filter {
-	__u32		data;
-};
-
-
 #endif	/* _LINUX_ICMP_H */
diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
index ba45e6bc0764..b4f6c29caced 100644
--- a/include/linux/icmpv6.h
+++ b/include/linux/icmpv6.h
@@ -1,174 +1,13 @@
 #ifndef _LINUX_ICMPV6_H
 #define _LINUX_ICMPV6_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-struct icmp6hdr {
-
-	__u8		icmp6_type;
-	__u8		icmp6_code;
-	__sum16		icmp6_cksum;
-
-
-	union {
-		__be32			un_data32[1];
-		__be16			un_data16[2];
-		__u8			un_data8[4];
-
-		struct icmpv6_echo {
-			__be16		identifier;
-			__be16		sequence;
-		} u_echo;
-
-                struct icmpv6_nd_advt {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-                        __u32		reserved:5,
-                        		override:1,
-                        		solicited:1,
-                        		router:1,
-					reserved2:24;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-                        __u32		router:1,
-					solicited:1,
-                        		override:1,
-                        		reserved:29;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif						
-                } u_nd_advt;
-
-                struct icmpv6_nd_ra {
-			__u8		hop_limit;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-			__u8		reserved:3,
-					router_pref:2,
-					home_agent:1,
-					other:1,
-					managed:1;
-
-#elif defined(__BIG_ENDIAN_BITFIELD)
-			__u8		managed:1,
-					other:1,
-					home_agent:1,
-					router_pref:2,
-					reserved:3;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-			__be16		rt_lifetime;
-                } u_nd_ra;
-
-	} icmp6_dataun;
-
-#define icmp6_identifier	icmp6_dataun.u_echo.identifier
-#define icmp6_sequence		icmp6_dataun.u_echo.sequence
-#define icmp6_pointer		icmp6_dataun.un_data32[0]
-#define icmp6_mtu		icmp6_dataun.un_data32[0]
-#define icmp6_unused		icmp6_dataun.un_data32[0]
-#define icmp6_maxdelay		icmp6_dataun.un_data16[0]
-#define icmp6_router		icmp6_dataun.u_nd_advt.router
-#define icmp6_solicited		icmp6_dataun.u_nd_advt.solicited
-#define icmp6_override		icmp6_dataun.u_nd_advt.override
-#define icmp6_ndiscreserved	icmp6_dataun.u_nd_advt.reserved
-#define icmp6_hop_limit		icmp6_dataun.u_nd_ra.hop_limit
-#define icmp6_addrconf_managed	icmp6_dataun.u_nd_ra.managed
-#define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
-#define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
-#define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/icmpv6.h>
 
 static inline struct icmp6hdr *icmp6_hdr(const struct sk_buff *skb)
 {
 	return (struct icmp6hdr *)skb_transport_header(skb);
 }
-#endif
-
-#define ICMPV6_ROUTER_PREF_LOW		0x3
-#define ICMPV6_ROUTER_PREF_MEDIUM	0x0
-#define ICMPV6_ROUTER_PREF_HIGH		0x1
-#define ICMPV6_ROUTER_PREF_INVALID	0x2
-
-#define ICMPV6_DEST_UNREACH		1
-#define ICMPV6_PKT_TOOBIG		2
-#define ICMPV6_TIME_EXCEED		3
-#define ICMPV6_PARAMPROB		4
-
-#define ICMPV6_INFOMSG_MASK		0x80
-
-#define ICMPV6_ECHO_REQUEST		128
-#define ICMPV6_ECHO_REPLY		129
-#define ICMPV6_MGM_QUERY		130
-#define ICMPV6_MGM_REPORT       	131
-#define ICMPV6_MGM_REDUCTION    	132
-
-#define ICMPV6_NI_QUERY			139
-#define ICMPV6_NI_REPLY			140
-
-#define ICMPV6_MLD2_REPORT		143
-
-#define ICMPV6_DHAAD_REQUEST		144
-#define ICMPV6_DHAAD_REPLY		145
-#define ICMPV6_MOBILE_PREFIX_SOL	146
-#define ICMPV6_MOBILE_PREFIX_ADV	147
-
-/*
- *	Codes for Destination Unreachable
- */
-#define ICMPV6_NOROUTE			0
-#define ICMPV6_ADM_PROHIBITED		1
-#define ICMPV6_NOT_NEIGHBOUR		2
-#define ICMPV6_ADDR_UNREACH		3
-#define ICMPV6_PORT_UNREACH		4
-
-/*
- *	Codes for Time Exceeded
- */
-#define ICMPV6_EXC_HOPLIMIT		0
-#define ICMPV6_EXC_FRAGTIME		1
-
-/*
- *	Codes for Parameter Problem
- */
-#define ICMPV6_HDR_FIELD		0
-#define ICMPV6_UNK_NEXTHDR		1
-#define ICMPV6_UNK_OPTION		2
-
-/*
- *	constants for (set|get)sockopt
- */
-
-#define ICMPV6_FILTER			1
-
-/*
- *	ICMPV6 filter
- */
-
-#define ICMPV6_FILTER_BLOCK		1
-#define ICMPV6_FILTER_PASS		2
-#define ICMPV6_FILTER_BLOCKOTHERS	3
-#define ICMPV6_FILTER_PASSONLY		4
-
-struct icmp6_filter {
-	__u32		data[8];
-};
-
-/*
- *	Definitions for MLDv2
- */
-#define MLD2_MODE_IS_INCLUDE	1
-#define MLD2_MODE_IS_EXCLUDE	2
-#define MLD2_CHANGE_TO_INCLUDE	3
-#define MLD2_CHANGE_TO_EXCLUDE	4
-#define MLD2_ALLOW_NEW_SOURCES	5
-#define MLD2_BLOCK_OLD_SOURCES	6
-
-#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
-
-#ifdef __KERNEL__
 
 #include <linux/netdevice.h>
 
@@ -192,5 +31,3 @@ extern void				icmpv6_flow_init(struct sock *sk,
 							 const struct in6_addr *daddr,
 							 int oif);
 #endif
-
-#endif
diff --git a/include/linux/if.h b/include/linux/if.h
deleted file mode 100644
index 1ec407b01e46..000000000000
--- a/include/linux/if.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the INET interface module.
- *
- * Version:	@(#)if.h	1.0.2	04/18/93
- *
- * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
- *		Ross Biro
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_H
-#define _LINUX_IF_H
-
-#include <linux/types.h>		/* for "__kernel_caddr_t" et al	*/
-#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
-#include <linux/compiler.h>		/* for "__user" et al           */
-
-#define	IFNAMSIZ	16
-#define	IFALIASZ	256
-#include <linux/hdlc/ioctl.h>
-
-/* Standard interface flags (netdevice->flags). */
-#define	IFF_UP		0x1		/* interface is up		*/
-#define	IFF_BROADCAST	0x2		/* broadcast address valid	*/
-#define	IFF_DEBUG	0x4		/* turn on debugging		*/
-#define	IFF_LOOPBACK	0x8		/* is a loopback net		*/
-#define	IFF_POINTOPOINT	0x10		/* interface is has p-p link	*/
-#define	IFF_NOTRAILERS	0x20		/* avoid use of trailers	*/
-#define	IFF_RUNNING	0x40		/* interface RFC2863 OPER_UP	*/
-#define	IFF_NOARP	0x80		/* no ARP protocol		*/
-#define	IFF_PROMISC	0x100		/* receive all packets		*/
-#define	IFF_ALLMULTI	0x200		/* receive all multicast packets*/
-
-#define IFF_MASTER	0x400		/* master of a load balancer 	*/
-#define IFF_SLAVE	0x800		/* slave of a load balancer	*/
-
-#define IFF_MULTICAST	0x1000		/* Supports multicast		*/
-
-#define IFF_PORTSEL	0x2000          /* can set media type		*/
-#define IFF_AUTOMEDIA	0x4000		/* auto media select active	*/
-#define IFF_DYNAMIC	0x8000		/* dialup device with changing addresses*/
-
-#define IFF_LOWER_UP	0x10000		/* driver signals L1 up		*/
-#define IFF_DORMANT	0x20000		/* driver signals dormant	*/
-
-#define IFF_ECHO	0x40000		/* echo sent packets		*/
-
-#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
-		IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
-
-/* Private (from user) interface flags (netdevice->priv_flags). */
-#define IFF_802_1Q_VLAN 0x1             /* 802.1Q VLAN device.          */
-#define IFF_EBRIDGE	0x2		/* Ethernet bridging device.	*/
-#define IFF_SLAVE_INACTIVE	0x4	/* bonding slave not the curr. active */
-#define IFF_MASTER_8023AD	0x8	/* bonding master, 802.3ad. 	*/
-#define IFF_MASTER_ALB	0x10		/* bonding master, balance-alb.	*/
-#define IFF_BONDING	0x20		/* bonding master or slave	*/
-#define IFF_SLAVE_NEEDARP 0x40		/* need ARPs for validation	*/
-#define IFF_ISATAP	0x80		/* ISATAP interface (RFC4214)	*/
-#define IFF_MASTER_ARPMON 0x100		/* bonding master, ARP mon in use */
-#define IFF_WAN_HDLC	0x200		/* WAN HDLC device		*/
-#define IFF_XMIT_DST_RELEASE 0x400	/* dev_hard_start_xmit() is allowed to
-					 * release skb->dst
-					 */
-#define IFF_DONT_BRIDGE 0x800		/* disallow bridging this ether dev */
-#define IFF_DISABLE_NETPOLL	0x1000	/* disable netpoll at run-time */
-#define IFF_MACVLAN_PORT	0x2000	/* device used as macvlan port */
-#define IFF_BRIDGE_PORT	0x4000		/* device used as bridge port */
-#define IFF_OVS_DATAPATH	0x8000	/* device used as Open vSwitch
-					 * datapath port */
-#define IFF_TX_SKB_SHARING	0x10000	/* The interface supports sharing
-					 * skbs on transmit */
-#define IFF_UNICAST_FLT	0x20000		/* Supports unicast filtering	*/
-#define IFF_TEAM_PORT	0x40000		/* device used as team port */
-#define IFF_SUPP_NOFCS	0x80000		/* device supports sending custom FCS */
-#define IFF_LIVE_ADDR_CHANGE 0x100000	/* device supports hardware address
-					 * change when it's running */
-
-
-#define IF_GET_IFACE	0x0001		/* for querying only */
-#define IF_GET_PROTO	0x0002
-
-/* For definitions see hdlc.h */
-#define IF_IFACE_V35	0x1000		/* V.35 serial interface	*/
-#define IF_IFACE_V24	0x1001		/* V.24 serial interface	*/
-#define IF_IFACE_X21	0x1002		/* X.21 serial interface	*/
-#define IF_IFACE_T1	0x1003		/* T1 telco serial interface	*/
-#define IF_IFACE_E1	0x1004		/* E1 telco serial interface	*/
-#define IF_IFACE_SYNC_SERIAL 0x1005	/* can't be set by software	*/
-#define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */
-
-/* For definitions see hdlc.h */
-#define IF_PROTO_HDLC	0x2000		/* raw HDLC protocol		*/
-#define IF_PROTO_PPP	0x2001		/* PPP protocol			*/
-#define IF_PROTO_CISCO	0x2002		/* Cisco HDLC protocol		*/
-#define IF_PROTO_FR	0x2003		/* Frame Relay protocol		*/
-#define IF_PROTO_FR_ADD_PVC 0x2004	/*    Create FR PVC		*/
-#define IF_PROTO_FR_DEL_PVC 0x2005	/*    Delete FR PVC		*/
-#define IF_PROTO_X25	0x2006		/* X.25				*/
-#define IF_PROTO_HDLC_ETH 0x2007	/* raw HDLC, Ethernet emulation	*/
-#define IF_PROTO_FR_ADD_ETH_PVC 0x2008	/*  Create FR Ethernet-bridged PVC */
-#define IF_PROTO_FR_DEL_ETH_PVC 0x2009	/*  Delete FR Ethernet-bridged PVC */
-#define IF_PROTO_FR_PVC	0x200A		/* for reading PVC status	*/
-#define IF_PROTO_FR_ETH_PVC 0x200B
-#define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
-
-/* RFC 2863 operational status */
-enum {
-	IF_OPER_UNKNOWN,
-	IF_OPER_NOTPRESENT,
-	IF_OPER_DOWN,
-	IF_OPER_LOWERLAYERDOWN,
-	IF_OPER_TESTING,
-	IF_OPER_DORMANT,
-	IF_OPER_UP,
-};
-
-/* link modes */
-enum {
-	IF_LINK_MODE_DEFAULT,
-	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */
-};
-
-/*
- *	Device mapping structure. I'd just gone off and designed a 
- *	beautiful scheme using only loadable modules with arguments
- *	for driver options and along come the PCMCIA people 8)
- *
- *	Ah well. The get() side of this is good for WDSETUP, and it'll
- *	be handy for debugging things. The set side is fine for now and
- *	being very small might be worth keeping for clean configuration.
- */
-
-struct ifmap {
-	unsigned long mem_start;
-	unsigned long mem_end;
-	unsigned short base_addr; 
-	unsigned char irq;
-	unsigned char dma;
-	unsigned char port;
-	/* 3 bytes spare */
-};
-
-struct if_settings {
-	unsigned int type;	/* Type of physical device or protocol */
-	unsigned int size;	/* Size of the data allocated by the caller */
-	union {
-		/* {atm/eth/dsl}_settings anyone ? */
-		raw_hdlc_proto		__user *raw_hdlc;
-		cisco_proto		__user *cisco;
-		fr_proto		__user *fr;
-		fr_proto_pvc		__user *fr_pvc;
-		fr_proto_pvc_info	__user *fr_pvc_info;
-
-		/* interface settings */
-		sync_serial_settings	__user *sync;
-		te1_settings		__user *te1;
-	} ifs_ifsu;
-};
-
-/*
- * Interface request structure used for socket
- * ioctl's.  All interface ioctl's must have parameter
- * definitions which begin with ifr_name.  The
- * remainder may be interface specific.
- */
-
-struct ifreq {
-#define IFHWADDRLEN	6
-	union
-	{
-		char	ifrn_name[IFNAMSIZ];		/* if name, e.g. "en0" */
-	} ifr_ifrn;
-	
-	union {
-		struct	sockaddr ifru_addr;
-		struct	sockaddr ifru_dstaddr;
-		struct	sockaddr ifru_broadaddr;
-		struct	sockaddr ifru_netmask;
-		struct  sockaddr ifru_hwaddr;
-		short	ifru_flags;
-		int	ifru_ivalue;
-		int	ifru_mtu;
-		struct  ifmap ifru_map;
-		char	ifru_slave[IFNAMSIZ];	/* Just fits the size */
-		char	ifru_newname[IFNAMSIZ];
-		void __user *	ifru_data;
-		struct	if_settings ifru_settings;
-	} ifr_ifru;
-};
-
-#define ifr_name	ifr_ifrn.ifrn_name	/* interface name 	*/
-#define ifr_hwaddr	ifr_ifru.ifru_hwaddr	/* MAC address 		*/
-#define	ifr_addr	ifr_ifru.ifru_addr	/* address		*/
-#define	ifr_dstaddr	ifr_ifru.ifru_dstaddr	/* other end of p-p lnk	*/
-#define	ifr_broadaddr	ifr_ifru.ifru_broadaddr	/* broadcast address	*/
-#define	ifr_netmask	ifr_ifru.ifru_netmask	/* interface net mask	*/
-#define	ifr_flags	ifr_ifru.ifru_flags	/* flags		*/
-#define	ifr_metric	ifr_ifru.ifru_ivalue	/* metric		*/
-#define	ifr_mtu		ifr_ifru.ifru_mtu	/* mtu			*/
-#define ifr_map		ifr_ifru.ifru_map	/* device map		*/
-#define ifr_slave	ifr_ifru.ifru_slave	/* slave device		*/
-#define	ifr_data	ifr_ifru.ifru_data	/* for use by interface	*/
-#define ifr_ifindex	ifr_ifru.ifru_ivalue	/* interface index	*/
-#define ifr_bandwidth	ifr_ifru.ifru_ivalue    /* link bandwidth	*/
-#define ifr_qlen	ifr_ifru.ifru_ivalue	/* Queue length 	*/
-#define ifr_newname	ifr_ifru.ifru_newname	/* New name		*/
-#define ifr_settings	ifr_ifru.ifru_settings	/* Device/proto settings*/
-
-/*
- * Structure used in SIOCGIFCONF request.
- * Used to retrieve interface configuration
- * for machine (useful for programs which
- * must know all networks accessible).
- */
-
-struct ifconf  {
-	int	ifc_len;			/* size of buffer	*/
-	union {
-		char __user *ifcu_buf;
-		struct ifreq __user *ifcu_req;
-	} ifc_ifcu;
-};
-#define	ifc_buf	ifc_ifcu.ifcu_buf		/* buffer address	*/
-#define	ifc_req	ifc_ifcu.ifcu_req		/* array of structures	*/
-
-#endif /* _LINUX_IF_H */
diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h
deleted file mode 100644
index 23357ab81a77..000000000000
--- a/include/linux/if_addr.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef __LINUX_IF_ADDR_H
-#define __LINUX_IF_ADDR_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-
-struct ifaddrmsg {
-	__u8		ifa_family;
-	__u8		ifa_prefixlen;	/* The prefix length		*/
-	__u8		ifa_flags;	/* Flags			*/
-	__u8		ifa_scope;	/* Address scope		*/
-	__u32		ifa_index;	/* Link index			*/
-};
-
-/*
- * Important comment:
- * IFA_ADDRESS is prefix address, rather than local interface address.
- * It makes no difference for normally configured broadcast interfaces,
- * but for point-to-point IFA_ADDRESS is DESTINATION address,
- * local address is supplied in IFA_LOCAL attribute.
- */
-enum {
-	IFA_UNSPEC,
-	IFA_ADDRESS,
-	IFA_LOCAL,
-	IFA_LABEL,
-	IFA_BROADCAST,
-	IFA_ANYCAST,
-	IFA_CACHEINFO,
-	IFA_MULTICAST,
-	__IFA_MAX,
-};
-
-#define IFA_MAX (__IFA_MAX - 1)
-
-/* ifa_flags */
-#define IFA_F_SECONDARY		0x01
-#define IFA_F_TEMPORARY		IFA_F_SECONDARY
-
-#define	IFA_F_NODAD		0x02
-#define IFA_F_OPTIMISTIC	0x04
-#define IFA_F_DADFAILED		0x08
-#define	IFA_F_HOMEADDRESS	0x10
-#define IFA_F_DEPRECATED	0x20
-#define IFA_F_TENTATIVE		0x40
-#define IFA_F_PERMANENT		0x80
-
-struct ifa_cacheinfo {
-	__u32	ifa_prefered;
-	__u32	ifa_valid;
-	__u32	cstamp; /* created timestamp, hundredths of seconds */
-	__u32	tstamp; /* updated timestamp, hundredths of seconds */
-};
-
-/* backwards compatibility for userspace */
-#ifndef __KERNEL__
-#define IFA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg))))
-#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg))
-#endif
-
-#endif
diff --git a/include/linux/if_addrlabel.h b/include/linux/if_addrlabel.h
deleted file mode 100644
index 54580c298187..000000000000
--- a/include/linux/if_addrlabel.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * if_addrlabel.h - netlink interface for address labels
- *
- * Copyright (C)2007 USAGI/WIDE Project,  All Rights Reserved.
- *
- * Authors:
- *	YOSHIFUJI Hideaki @ USAGI/WIDE <yoshfuji@linux-ipv6.org>
- */
-
-#ifndef __LINUX_IF_ADDRLABEL_H
-#define __LINUX_IF_ADDRLABEL_H
-
-#include <linux/types.h>
-
-struct ifaddrlblmsg {
-	__u8		ifal_family;		/* Address family */
-	__u8		__ifal_reserved;	/* Reserved */
-	__u8		ifal_prefixlen;		/* Prefix length */
-	__u8		ifal_flags;		/* Flags */
-	__u32		ifal_index;		/* Link index */
-	__u32		ifal_seq;		/* sequence number */
-};
-
-enum {
-	IFAL_ADDRESS = 1,
-	IFAL_LABEL = 2,
-	__IFAL_MAX
-};
-
-#define IFAL_MAX	(__IFAL_MAX - 1)
-
-#endif
diff --git a/include/linux/if_alg.h b/include/linux/if_alg.h
deleted file mode 100644
index 0f9acce5b1ff..000000000000
--- a/include/linux/if_alg.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * if_alg: User-space algorithm interface
- *
- * Copyright (c) 2010 Herbert Xu <herbert@gondor.apana.org.au>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- */
-
-#ifndef _LINUX_IF_ALG_H
-#define _LINUX_IF_ALG_H
-
-#include <linux/types.h>
-
-struct sockaddr_alg {
-	__u16	salg_family;
-	__u8	salg_type[14];
-	__u32	salg_feat;
-	__u32	salg_mask;
-	__u8	salg_name[64];
-};
-
-struct af_alg_iv {
-	__u32	ivlen;
-	__u8	iv[0];
-};
-
-/* Socket options */
-#define ALG_SET_KEY			1
-#define ALG_SET_IV			2
-#define ALG_SET_OP			3
-
-/* Operations */
-#define ALG_OP_DECRYPT			0
-#define ALG_OP_ENCRYPT			1
-
-#endif	/* _LINUX_IF_ALG_H */
diff --git a/include/linux/if_arcnet.h b/include/linux/if_arcnet.h
deleted file mode 100644
index 46e34bd0e783..000000000000
--- a/include/linux/if_arcnet.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * INET         An implementation of the TCP/IP protocol suite for the LINUX
- *              operating system.  INET is implemented using the  BSD Socket
- *              interface as the means of communication with the user level.
- *
- *              Global definitions for the ARCnet interface.
- *
- * Authors:     David Woodhouse and Avery Pennarun
- *
- *              This program is free software; you can redistribute it and/or
- *              modify it under the terms of the GNU General Public License
- *              as published by the Free Software Foundation; either version
- *              2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_IF_ARCNET_H
-#define _LINUX_IF_ARCNET_H
-
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-
-/*
- *    These are the defined ARCnet Protocol ID's.
- */
-
-/* CAP mode */
-/* No macro but uses 1-8 */
-
-/* RFC1201 Protocol ID's */
-#define ARC_P_IP		212	/* 0xD4 */
-#define ARC_P_IPV6		196	/* 0xC4: RFC2497 */
-#define ARC_P_ARP		213	/* 0xD5 */
-#define ARC_P_RARP		214	/* 0xD6 */
-#define ARC_P_IPX		250	/* 0xFA */
-#define ARC_P_NOVELL_EC		236	/* 0xEC */
-
-/* Old RFC1051 Protocol ID's */
-#define ARC_P_IP_RFC1051	240	/* 0xF0 */
-#define ARC_P_ARP_RFC1051	241	/* 0xF1 */
-
-/* MS LanMan/WfWg "NDIS" encapsulation */
-#define ARC_P_ETHER		232	/* 0xE8 */
-
-/* Unsupported/indirectly supported protocols */
-#define ARC_P_DATAPOINT_BOOT	0	/* very old Datapoint equipment */
-#define ARC_P_DATAPOINT_MOUNT	1
-#define ARC_P_POWERLAN_BEACON	8	/* Probably ATA-Netbios related */
-#define ARC_P_POWERLAN_BEACON2	243	/* 0xF3 */
-#define ARC_P_LANSOFT		251	/* 0xFB - what is this? */
-#define ARC_P_ATALK		0xDD
-
-/* Hardware address length */
-#define ARCNET_ALEN	1
-
-/*
- * The RFC1201-specific components of an arcnet packet header.
- */
-struct arc_rfc1201 {
-    __u8  proto;		/* protocol ID field - varies		*/
-    __u8  split_flag;	/* for use with split packets		*/
-    __be16   sequence;		/* sequence number			*/
-    __u8  payload[0];	/* space remaining in packet (504 bytes)*/
-};
-#define RFC1201_HDR_SIZE 4
-
-
-/*
- * The RFC1051-specific components.
- */
-struct arc_rfc1051 {
-    __u8 proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
-    __u8 payload[0];		/* 507 bytes			*/
-};
-#define RFC1051_HDR_SIZE 1
-
-
-/*
- * The ethernet-encap-specific components.  We have a real ethernet header
- * and some data.
- */
-struct arc_eth_encap {
-    __u8 proto;		/* Always ARC_P_ETHER			*/
-    struct ethhdr eth;		/* standard ethernet header (yuck!)	*/
-    __u8 payload[0];		/* 493 bytes				*/
-};
-#define ETH_ENCAP_HDR_SIZE 14
-
-
-struct arc_cap {
-	__u8 proto;
-	__u8 cookie[sizeof(int)];   /* Actually NOT sent over the network */
-	union {
-		__u8 ack;
-		__u8 raw[0];		/* 507 bytes */
-	} mes;
-};
-
-/*
- * The data needed by the actual arcnet hardware.
- *
- * Now, in the real arcnet hardware, the third and fourth bytes are the
- * 'offset' specification instead of the length, and the soft data is at
- * the _end_ of the 512-byte buffer.  We hide this complexity inside the
- * driver.
- */
-struct arc_hardware {
-    __u8  source,		/* source ARCnet - filled in automagically */
-             dest,		/* destination ARCnet - 0 for broadcast    */
-    	     offset[2];		/* offset bytes (some weird semantics)     */
-};
-#define ARC_HDR_SIZE 4
-
-/*
- * This is an ARCnet frame header, as seen by the kernel (and userspace,
- * when you do a raw packet capture).
- */
-struct archdr {
-    /* hardware requirements */
-    struct arc_hardware hard;
-     
-    /* arcnet encapsulation-specific bits */
-    union {
-	struct arc_rfc1201   rfc1201;
-	struct arc_rfc1051   rfc1051;
-	struct arc_eth_encap eth_encap;
-	struct arc_cap       cap;
-	__u8 raw[0];		/* 508 bytes				*/
-    } soft;
-};
-
-#endif				/* _LINUX_IF_ARCNET_H */
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 9adcc29f084a..89b4614a4722 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -23,140 +23,8 @@
 #ifndef _LINUX_IF_ARP_H
 #define _LINUX_IF_ARP_H
 
-#include <linux/netdevice.h>
-
-/* ARP protocol HARDWARE identifiers. */
-#define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/
-#define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/
-#define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/
-#define	ARPHRD_AX25	3		/* AX.25 Level 2		*/
-#define	ARPHRD_PRONET	4		/* PROnet token ring		*/
-#define	ARPHRD_CHAOS	5		/* Chaosnet			*/
-#define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/
-#define	ARPHRD_ARCNET	7		/* ARCnet			*/
-#define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/
-#define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/
-#define ARPHRD_ATM	19		/* ATM 				*/
-#define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/
-#define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/
-#define ARPHRD_EUI64	27		/* EUI-64                       */
-#define ARPHRD_INFINIBAND 32		/* InfiniBand			*/
-
-/* Dummy types for non ARP hardware */
-#define ARPHRD_SLIP	256
-#define ARPHRD_CSLIP	257
-#define ARPHRD_SLIP6	258
-#define ARPHRD_CSLIP6	259
-#define ARPHRD_RSRVD	260		/* Notional KISS type 		*/
-#define ARPHRD_ADAPT	264
-#define ARPHRD_ROSE	270
-#define ARPHRD_X25	271		/* CCITT X.25			*/
-#define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/
-#define ARPHRD_CAN	280		/* Controller Area Network      */
-#define ARPHRD_PPP	512
-#define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/
-#define ARPHRD_HDLC	ARPHRD_CISCO
-#define ARPHRD_LAPB	516		/* LAPB				*/
-#define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */
-#define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/
-
-#define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/
-#define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/
-#define ARPHRD_FRAD	770             /* Frame Relay Access Device    */
-#define ARPHRD_SKIP	771		/* SKIP vif			*/
-#define ARPHRD_LOOPBACK	772		/* Loopback device		*/
-#define ARPHRD_LOCALTLK 773		/* Localtalk device		*/
-#define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */
-#define ARPHRD_BIF      775             /* AP1000 BIF                   */
-#define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/
-#define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/
-#define ARPHRD_IPGRE	778		/* GRE over IP			*/
-#define ARPHRD_PIMREG	779		/* PIMSM register interface	*/
-#define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */
-#define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/
-#define ARPHRD_ECONET	782		/* Acorn Econet			*/
-#define ARPHRD_IRDA 	783		/* Linux-IrDA			*/
-/* ARP works differently on different FC media .. so  */
-#define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/
-#define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */
-#define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/
-#define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/
-	/* 787->799 reserved for fibrechannel media types */
-#define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/
-#define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
-#define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
-#define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */
-#define ARPHRD_IEEE802154	  804
-#define ARPHRD_IEEE802154_MONITOR 805	/* IEEE 802.15.4 network monitor */
-
-#define ARPHRD_PHONET	820		/* PhoNet media type		*/
-#define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/
-#define ARPHRD_CAIF	822		/* CAIF media type		*/
-#define ARPHRD_IP6GRE	823		/* GRE over IPv6		*/
-
-#define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */
-#define ARPHRD_NONE	  0xFFFE	/* zero header length */
-
-/* ARP protocol opcodes. */
-#define	ARPOP_REQUEST	1		/* ARP request			*/
-#define	ARPOP_REPLY	2		/* ARP reply			*/
-#define	ARPOP_RREQUEST	3		/* RARP request			*/
-#define	ARPOP_RREPLY	4		/* RARP reply			*/
-#define	ARPOP_InREQUEST	8		/* InARP request		*/
-#define	ARPOP_InREPLY	9		/* InARP reply			*/
-#define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/
-
-
-/* ARP ioctl request. */
-struct arpreq {
-  struct sockaddr	arp_pa;		/* protocol address		*/
-  struct sockaddr	arp_ha;		/* hardware address		*/
-  int			arp_flags;	/* flags			*/
-  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
-  char			arp_dev[16];
-};
-
-struct arpreq_old {
-  struct sockaddr	arp_pa;		/* protocol address		*/
-  struct sockaddr	arp_ha;		/* hardware address		*/
-  int			arp_flags;	/* flags			*/
-  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
-};
-
-/* ARP Flag values. */
-#define ATF_COM		0x02		/* completed entry (ha valid)	*/
-#define	ATF_PERM	0x04		/* permanent entry		*/
-#define	ATF_PUBL	0x08		/* publish entry		*/
-#define	ATF_USETRAILERS	0x10		/* has requested trailers	*/
-#define ATF_NETMASK     0x20            /* want to use a netmask (only
-					   for proxy entries) */
-#define ATF_DONTPUB	0x40		/* don't answer this addresses	*/
-
-/*
- *	This structure defines an ethernet arp header.
- */
-
-struct arphdr {
-	__be16		ar_hrd;		/* format of hardware address	*/
-	__be16		ar_pro;		/* format of protocol address	*/
-	unsigned char	ar_hln;		/* length of hardware address	*/
-	unsigned char	ar_pln;		/* length of protocol address	*/
-	__be16		ar_op;		/* ARP opcode (command)		*/
-
-#if 0
-	 /*
-	  *	 Ethernet looks like this : This bit is variable sized however...
-	  */
-	unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/
-	unsigned char		ar_sip[4];		/* sender IP address		*/
-	unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/
-	unsigned char		ar_tip[4];		/* target IP address		*/
-#endif
-
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/if_arp.h>
 
 static inline struct arphdr *arp_hdr(const struct sk_buff *skb)
 {
@@ -168,6 +36,4 @@ static inline int arp_hdr_len(struct net_device *dev)
 	/* ARP header, plus 2 device addresses, plus 2 IP addresses. */
 	return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2;
 }
-#endif
-
 #endif	/* _LINUX_IF_ARP_H */
diff --git a/include/linux/if_bonding.h b/include/linux/if_bonding.h
deleted file mode 100644
index a17edda8a781..000000000000
--- a/include/linux/if_bonding.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'.
- *
- *
- * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
- * NCM: Network and Communications Management, Inc.
- *
- * BUT, I'm the one who modified it for ethernet, so:
- * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov
- *
- *	This software may be used and distributed according to the terms
- *	of the GNU Public License, incorporated herein by reference.
- *
- * 2003/03/18 - Amir Noam <amir.noam at intel dot com>
- *	- Added support for getting slave's speed and duplex via ethtool.
- *	  Needed for 802.3ad and other future modes.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- *		Shmulik Hen <shmulik.hen at intel dot com>
- *	- Enable support of modes that need to use the unique mac address of
- *	  each slave.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- *		Amir Noam <amir.noam at intel dot com>
- *	- Moved driver's private data types to bonding.h
- *
- * 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
- *		Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- *		Shmulik Hen <shmulik.hen at intel dot com>
- *	- Added support for IEEE 802.3ad Dynamic link aggregation mode.
- *
- * 2003/05/01 - Amir Noam <amir.noam at intel dot com>
- *	- Added ABI version control to restore compatibility between
- *	  new/old ifenslave and new/old bonding.
- *
- * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- *	- Code cleanup and style changes
- *
- * 2005/05/05 - Jason Gabler <jygabler at lbl dot gov>
- *      - added definitions for various XOR hashing policies
- */
-
-#ifndef _LINUX_IF_BONDING_H
-#define _LINUX_IF_BONDING_H
-
-#include <linux/if.h>
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-/* userland - kernel ABI version (2003/05/08) */
-#define BOND_ABI_VERSION 2
-
-/*
- * We can remove these ioctl definitions in 2.5.  People should use the
- * SIOC*** versions of them instead
- */
-#define BOND_ENSLAVE_OLD		(SIOCDEVPRIVATE)
-#define BOND_RELEASE_OLD		(SIOCDEVPRIVATE + 1)
-#define BOND_SETHWADDR_OLD		(SIOCDEVPRIVATE + 2)
-#define BOND_SLAVE_INFO_QUERY_OLD	(SIOCDEVPRIVATE + 11)
-#define BOND_INFO_QUERY_OLD		(SIOCDEVPRIVATE + 12)
-#define BOND_CHANGE_ACTIVE_OLD		(SIOCDEVPRIVATE + 13)
-
-#define BOND_CHECK_MII_STATUS	(SIOCGMIIPHY)
-
-#define BOND_MODE_ROUNDROBIN	0
-#define BOND_MODE_ACTIVEBACKUP	1
-#define BOND_MODE_XOR		2
-#define BOND_MODE_BROADCAST	3
-#define BOND_MODE_8023AD        4
-#define BOND_MODE_TLB           5
-#define BOND_MODE_ALB		6 /* TLB + RLB (receive load balancing) */
-
-/* each slave's link has 4 states */
-#define BOND_LINK_UP    0           /* link is up and running */
-#define BOND_LINK_FAIL  1           /* link has just gone down */
-#define BOND_LINK_DOWN  2           /* link has been down for too long time */
-#define BOND_LINK_BACK  3           /* link is going back */
-
-/* each slave has several states */
-#define BOND_STATE_ACTIVE       0   /* link is active */
-#define BOND_STATE_BACKUP       1   /* link is backup */
-
-#define BOND_DEFAULT_MAX_BONDS  1   /* Default maximum number of devices to support */
-
-#define BOND_DEFAULT_TX_QUEUES 16   /* Default number of tx queues per device */
-
-#define BOND_DEFAULT_RESEND_IGMP	1 /* Default number of IGMP membership reports */
-
-/* hashing types */
-#define BOND_XMIT_POLICY_LAYER2		0 /* layer 2 (MAC only), default */
-#define BOND_XMIT_POLICY_LAYER34	1 /* layer 3+4 (IP ^ (TCP || UDP)) */
-#define BOND_XMIT_POLICY_LAYER23	2 /* layer 2+3 (IP ^ MAC) */
-
-typedef struct ifbond {
-	__s32 bond_mode;
-	__s32 num_slaves;
-	__s32 miimon;
-} ifbond;
-
-typedef struct ifslave {
-	__s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */
-	char slave_name[IFNAMSIZ];
-	__s8 link;
-	__s8 state;
-	__u32  link_failure_count;
-} ifslave;
-
-struct ad_info {
-	__u16 aggregator_id;
-	__u16 ports;
-	__u16 actor_key;
-	__u16 partner_key;
-	__u8 partner_system[ETH_ALEN];
-};
-
-#endif /* _LINUX_IF_BONDING_H */
-
-/*
- * Local variables:
- *  version-control: t
- *  kept-new-versions: 5
- *  c-indent-level: 8
- *  c-basic-offset: 8
- *  tab-width: 8
- * End:
- */
-
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
index dd3f20139640..1085ffeef956 100644
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -9,97 +9,12 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IF_BRIDGE_H
 #define _LINUX_IF_BRIDGE_H
 
-#include <linux/types.h>
-
-#define SYSFS_BRIDGE_ATTR	"bridge"
-#define SYSFS_BRIDGE_FDB	"brforward"
-#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
-#define SYSFS_BRIDGE_PORT_ATTR	"brport"
-#define SYSFS_BRIDGE_PORT_LINK	"bridge"
-
-#define BRCTL_VERSION 1
-
-#define BRCTL_GET_VERSION 0
-#define BRCTL_GET_BRIDGES 1
-#define BRCTL_ADD_BRIDGE 2
-#define BRCTL_DEL_BRIDGE 3
-#define BRCTL_ADD_IF 4
-#define BRCTL_DEL_IF 5
-#define BRCTL_GET_BRIDGE_INFO 6
-#define BRCTL_GET_PORT_LIST 7
-#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
-#define BRCTL_SET_BRIDGE_HELLO_TIME 9
-#define BRCTL_SET_BRIDGE_MAX_AGE 10
-#define BRCTL_SET_AGEING_TIME 11
-#define BRCTL_SET_GC_INTERVAL 12
-#define BRCTL_GET_PORT_INFO 13
-#define BRCTL_SET_BRIDGE_STP_STATE 14
-#define BRCTL_SET_BRIDGE_PRIORITY 15
-#define BRCTL_SET_PORT_PRIORITY 16
-#define BRCTL_SET_PATH_COST 17
-#define BRCTL_GET_FDB_ENTRIES 18
-
-#define BR_STATE_DISABLED 0
-#define BR_STATE_LISTENING 1
-#define BR_STATE_LEARNING 2
-#define BR_STATE_FORWARDING 3
-#define BR_STATE_BLOCKING 4
-
-struct __bridge_info {
-	__u64 designated_root;
-	__u64 bridge_id;
-	__u32 root_path_cost;
-	__u32 max_age;
-	__u32 hello_time;
-	__u32 forward_delay;
-	__u32 bridge_max_age;
-	__u32 bridge_hello_time;
-	__u32 bridge_forward_delay;
-	__u8 topology_change;
-	__u8 topology_change_detected;
-	__u8 root_port;
-	__u8 stp_enabled;
-	__u32 ageing_time;
-	__u32 gc_interval;
-	__u32 hello_timer_value;
-	__u32 tcn_timer_value;
-	__u32 topology_change_timer_value;
-	__u32 gc_timer_value;
-};
-
-struct __port_info {
-	__u64 designated_root;
-	__u64 designated_bridge;
-	__u16 port_id;
-	__u16 designated_port;
-	__u32 path_cost;
-	__u32 designated_cost;
-	__u8 state;
-	__u8 top_change_ack;
-	__u8 config_pending;
-	__u8 unused0;
-	__u32 message_age_timer_value;
-	__u32 forward_delay_timer_value;
-	__u32 hold_timer_value;
-};
-
-struct __fdb_entry {
-	__u8 mac_addr[6];
-	__u8 port_no;
-	__u8 is_local;
-	__u32 ageing_timer_value;
-	__u8 port_hi;
-	__u8 pad0;
-	__u16 unused;
-};
-
-#ifdef __KERNEL__
 
 #include <linux/netdevice.h>
+#include <uapi/linux/if_bridge.h>
 
 extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *));
 
@@ -107,5 +22,3 @@ typedef int br_should_route_hook_t(struct sk_buff *skb);
 extern br_should_route_hook_t __rcu *br_should_route_hook;
 
 #endif
-
-#endif
diff --git a/include/linux/if_cablemodem.h b/include/linux/if_cablemodem.h
deleted file mode 100644
index 9ca1007edd93..000000000000
--- a/include/linux/if_cablemodem.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _LINUX_CABLEMODEM_H_
-#define _LINUX_CABLEMODEM_H_
-/*
- *		Author: Franco Venturi <fventuri@mediaone.net>
- *		Copyright 1998 Franco Venturi
- *
- *		This program is free software; you can redistribute it
- *		and/or  modify it under  the terms of  the GNU General
- *		Public  License as  published  by  the  Free  Software
- *		Foundation;  either  version 2 of the License, or  (at
- *		your option) any later version.
- */
-
-/* some useful defines for sb1000.c e cmconfig.c - fv */
-#define SIOCGCMSTATS		SIOCDEVPRIVATE+0	/* get cable modem stats */
-#define SIOCGCMFIRMWARE		SIOCDEVPRIVATE+1	/* get cm firmware version */
-#define SIOCGCMFREQUENCY	SIOCDEVPRIVATE+2	/* get cable modem frequency */
-#define SIOCSCMFREQUENCY	SIOCDEVPRIVATE+3	/* set cable modem frequency */
-#define SIOCGCMPIDS			SIOCDEVPRIVATE+4	/* get cable modem PIDs */
-#define SIOCSCMPIDS			SIOCDEVPRIVATE+5	/* set cable modem PIDs */
-
-#endif
diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h
index 18a5d02a8644..d984694c384d 100644
--- a/include/linux/if_eql.h
+++ b/include/linux/if_eql.h
@@ -15,28 +15,13 @@
  *    McLean VA 22101
  *    Phone: 1-703-847-0040 ext 103
  */
-
 #ifndef _LINUX_IF_EQL_H
 #define _LINUX_IF_EQL_H
 
-#define EQL_DEFAULT_SLAVE_PRIORITY 28800
-#define EQL_DEFAULT_MAX_SLAVES     4
-#define EQL_DEFAULT_MTU            576
-#define EQL_DEFAULT_RESCHED_IVAL   HZ
-
-#define EQL_ENSLAVE     (SIOCDEVPRIVATE)
-#define EQL_EMANCIPATE  (SIOCDEVPRIVATE + 1)
-
-#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
-#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
-
-#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
-#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
-
-#ifdef __KERNEL__
 
 #include <linux/timer.h>
 #include <linux/spinlock.h>
+#include <uapi/linux/if_eql.h>
 
 typedef struct slave {
 	struct list_head	list;
@@ -61,23 +46,4 @@ typedef struct equalizer {
 	struct timer_list	timer;
 } equalizer_t;  
 
-#endif /* __KERNEL__ */
-
-typedef struct master_config {
-	char	master_name[16];
-	int	max_slaves;
-	int	min_slaves;
-} master_config_t;
-
-typedef struct slave_config {
-	char	slave_name[16];
-	long	priority;
-} slave_config_t;
-
-typedef struct slaving_request {
-	char	slave_name[16];
-	long	priority;
-} slaving_request_t;
-
-
 #endif /* _LINUX_EQL_H */
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 167ce5b363d2..12b4d55a02af 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -17,122 +17,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IF_ETHER_H
 #define _LINUX_IF_ETHER_H
 
-#include <linux/types.h>
-
-/*
- *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
- *	and FCS/CRC (frame check sequence).
- */
-
-#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
-#define ETH_HLEN	14		/* Total octets in header.	 */
-#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
-#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
-#define ETH_FCS_LEN	4		/* Octets in the FCS		 */
-
-/*
- *	These are the defined Ethernet Protocol ID's.
- */
-
-#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
-#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
-#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
-#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
-#define ETH_P_X25	0x0805		/* CCITT X.25			*/
-#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
-#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet	[ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
-#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr Trans packet */
-#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
-#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
-#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
-#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
-#define ETH_P_LAT       0x6004          /* DEC LAT                      */
-#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
-#define ETH_P_CUST      0x6006          /* DEC Customer use             */
-#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
-#define ETH_P_TEB	0x6558		/* Trans Ether Bridging		*/
-#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
-#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
-#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
-#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
-#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
-#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
-#define ETH_P_PAUSE	0x8808		/* IEEE Pause frames. See 802.3 31B */
-#define ETH_P_SLOW	0x8809		/* Slow Protocol. See 802.3ad 43B */
-#define ETH_P_WCCP	0x883E		/* Web-cache coordination protocol
-					 * defined in draft-wilson-wrec-wccp-v2-00.txt */
-#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
-#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
-#define ETH_P_MPLS_UC	0x8847		/* MPLS Unicast traffic		*/
-#define ETH_P_MPLS_MC	0x8848		/* MPLS Multicast traffic	*/
-#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
-#define ETH_P_LINK_CTL	0x886c		/* HPNA, wlan link local tunnel */
-#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
-					 * over Ethernet
-					 */
-#define ETH_P_PAE	0x888E		/* Port Access Entity (IEEE 802.1X) */
-#define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
-#define ETH_P_8021AD	0x88A8          /* 802.1ad Service VLAN		*/
-#define ETH_P_802_EX1	0x88B5		/* 802.1 Local Experimental 1.  */
-#define ETH_P_TIPC	0x88CA		/* TIPC 			*/
-#define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
-#define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
-#define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
-#define ETH_P_TDLS	0x890D          /* TDLS */
-#define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
-#define ETH_P_QINQ1	0x9100		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ2	0x9200		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ3	0x9300		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_AF_IUCV   0xFBFB		/* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
-
-/*
- *	Non DIX types. Won't clash for 1500 types.
- */
-
-#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
-#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
-#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
-#define ETH_P_802_2	0x0004		/* 802.2 frames 		*/
-#define ETH_P_SNAP	0x0005		/* Internal only		*/
-#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
-#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type 	*/
-#define ETH_P_CAN	0x000C		/* CAN: Controller Area Network */
-#define ETH_P_CANFD	0x000D		/* CANFD: CAN flexible data rate*/
-#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2	0x0011		/* 802.2 frames 		*/
-#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
-#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
-#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
-#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
-#define ETH_P_HDLC	0x0019		/* HDLC frames			*/
-#define ETH_P_ARCNET	0x001A		/* 1A for ArcNet :-)            */
-#define ETH_P_DSA	0x001B		/* Distributed Switch Arch.	*/
-#define ETH_P_TRAILER	0x001C		/* Trailer switch tagging	*/
-#define ETH_P_PHONET	0x00F5		/* Nokia Phonet frames          */
-#define ETH_P_IEEE802154 0x00F6		/* IEEE802.15.4 frame		*/
-#define ETH_P_CAIF	0x00F7		/* ST-Ericsson CAIF protocol	*/
-
-/*
- *	This is an Ethernet frame header.
- */
-
-struct ethhdr {
-	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
-	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
-	__be16		h_proto;		/* packet type ID field	*/
-} __attribute__((packed));
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/if_ether.h>
 
 static inline struct ethhdr *eth_hdr(const struct sk_buff *skb)
 {
@@ -144,6 +33,4 @@ int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
 int mac_pton(const char *s, u8 *mac);
 extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
 
-#endif
-
 #endif	/* _LINUX_IF_ETHER_H */
diff --git a/include/linux/if_fc.h b/include/linux/if_fc.h
deleted file mode 100644
index 6ed7f1bf35c8..000000000000
--- a/include/linux/if_fc.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for Fibre Channel.
- *
- * Version:	@(#)if_fc.h	0.0	11/20/98
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *		Donald Becker, <becker@super.org>
- *    Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
- *	  Vineet Abraham, <vma@iol.unh.edu>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_FC_H
-#define _LINUX_IF_FC_H
-
-#include <linux/types.h>
-
-#define FC_ALEN	6		/* Octets in one ethernet addr	 */
-#define FC_HLEN   (sizeof(struct fch_hdr)+sizeof(struct fcllc))
-#define FC_ID_LEN 3		/* Octets in a Fibre Channel Address */
-
-/* LLC and SNAP constants */
-#define EXTENDED_SAP 0xAA
-#define UI_CMD       0x03
-
-/* This is NOT the Fibre Channel frame header. The FC frame header is
- *  constructed in the driver as the Tachyon needs certain fields in
- *  certains positions. So, it can't be generalized here.*/
-
-struct fch_hdr {
-	__u8  daddr[FC_ALEN];		/* destination address */
-	__u8  saddr[FC_ALEN];		/* source address */
-};
-
-/* This is a Fibre Channel LLC structure */
-struct fcllc {
-	__u8  dsap;			/* destination SAP */
-	__u8  ssap;			/* source SAP */
-	__u8  llc;			/* LLC control field */
-	__u8  protid[3];		/* protocol id */
-	__be16 ethertype;		/* ether type field */
-};
-
-#endif	/* _LINUX_IF_FC_H */
diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h
index e6dc11e7f9a5..f5550b3eeeab 100644
--- a/include/linux/if_fddi.h
+++ b/include/linux/if_fddi.h
@@ -24,84 +24,8 @@
 #ifndef _LINUX_IF_FDDI_H
 #define _LINUX_IF_FDDI_H
 
-#include <linux/types.h>
-
-/*
- *  Define max and min legal sizes.  The frame sizes do not include
- *  4 byte FCS/CRC (frame check sequence).
- */
-#define FDDI_K_ALEN			6		/* Octets in one FDDI address */
-#define FDDI_K_8022_HLEN	16		/* Total octets in 802.2 header */
-#define FDDI_K_SNAP_HLEN	21		/* Total octets in 802.2 SNAP header */
-#define FDDI_K_8022_ZLEN	16		/* Min octets in 802.2 frame sans FCS */
-#define FDDI_K_SNAP_ZLEN	21		/* Min octets in 802.2 SNAP frame sans FCS */
-#define FDDI_K_8022_DLEN	4475	/* Max octets in 802.2 payload */
-#define FDDI_K_SNAP_DLEN	4470	/* Max octets in 802.2 SNAP payload */
-#define FDDI_K_LLC_ZLEN		13		/* Min octets in LLC frame sans FCS */
-#define FDDI_K_LLC_LEN		4491	/* Max octets in LLC frame sans FCS */
-
-/* Define FDDI Frame Control (FC) Byte values */
-#define FDDI_FC_K_VOID					0x00	
-#define FDDI_FC_K_NON_RESTRICTED_TOKEN	0x80	
-#define FDDI_FC_K_RESTRICTED_TOKEN		0xC0	
-#define FDDI_FC_K_SMT_MIN				0x41
-#define FDDI_FC_K_SMT_MAX		   		0x4F
-#define FDDI_FC_K_MAC_MIN				0xC1
-#define FDDI_FC_K_MAC_MAX		  		0xCF	
-#define FDDI_FC_K_ASYNC_LLC_MIN			0x50
-#define FDDI_FC_K_ASYNC_LLC_DEF			0x54
-#define FDDI_FC_K_ASYNC_LLC_MAX			0x5F
-#define FDDI_FC_K_SYNC_LLC_MIN			0xD0
-#define FDDI_FC_K_SYNC_LLC_MAX			0xD7
-#define FDDI_FC_K_IMPLEMENTOR_MIN		0x60
-#define FDDI_FC_K_IMPLEMENTOR_MAX  		0x6F
-#define FDDI_FC_K_RESERVED_MIN			0x70
-#define FDDI_FC_K_RESERVED_MAX			0x7F
-
-/* Define LLC and SNAP constants */
-#define FDDI_EXTENDED_SAP	0xAA
-#define FDDI_UI_CMD			0x03
-
-/* Define 802.2 Type 1 header */
-struct fddi_8022_1_hdr {
-	__u8	dsap;					/* destination service access point */
-	__u8	ssap;					/* source service access point */
-	__u8	ctrl;					/* control byte #1 */
-} __attribute__((packed));
-
-/* Define 802.2 Type 2 header */
-struct fddi_8022_2_hdr {
-	__u8	dsap;					/* destination service access point */
-	__u8	ssap;					/* source service access point */
-	__u8	ctrl_1;					/* control byte #1 */
-	__u8	ctrl_2;					/* control byte #2 */
-} __attribute__((packed));
-
-/* Define 802.2 SNAP header */
-#define FDDI_K_OUI_LEN	3
-struct fddi_snap_hdr {
-	__u8	dsap;					/* always 0xAA */
-	__u8	ssap;					/* always 0xAA */
-	__u8	ctrl;					/* always 0x03 */
-	__u8	oui[FDDI_K_OUI_LEN];	/* organizational universal id */
-	__be16	ethertype;				/* packet type ID field */
-} __attribute__((packed));
-
-/* Define FDDI LLC frame header */
-struct fddihdr {
-	__u8	fc;						/* frame control */
-	__u8	daddr[FDDI_K_ALEN];		/* destination address */
-	__u8	saddr[FDDI_K_ALEN];		/* source address */
-	union
-		{
-		struct fddi_8022_1_hdr		llc_8022_1;
-		struct fddi_8022_2_hdr		llc_8022_2;
-		struct fddi_snap_hdr		llc_snap;
-		} hdr;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
 #include <linux/netdevice.h>
+#include <uapi/linux/if_fddi.h>
 
 /* Define FDDI statistics structure */
 struct fddi_statistics {
@@ -194,6 +118,4 @@ struct fddi_statistics {
 	__u32	port_ler_flag[2];
 	__u32	port_hardware_present[2];
 };
-#endif /* __KERNEL__ */
-
 #endif	/* _LINUX_IF_FDDI_H */
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
index 191ee0869bc1..4316aa173dde 100644
--- a/include/linux/if_frad.h
+++ b/include/linux/if_frad.h
@@ -20,105 +20,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
-
 #ifndef _FRAD_H_
 #define _FRAD_H_
 
-#include <linux/if.h>
-
-/* Structures and constants associated with the DLCI device driver */
-
-struct dlci_add
-{
-   char  devname[IFNAMSIZ];
-   short dlci;
-};
-
-#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
-#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
-
-/* 
- * These are related to the Sangoma SDLA and should remain in order. 
- * Code within the SDLA module is based on the specifics of this 
- * structure.  Change at your own peril.
- */
-struct dlci_conf {
-   short flags;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-
-/* these are part of the status read */
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-
-/* add any new fields here above is a mirror of sdla_dlci_conf */
-};
-
-#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
-
-/* configuration flags for DLCI */
-#define DLCI_IGNORE_CIR_OUT	0x0001
-#define DLCI_ACCOUNT_CIR_IN	0x0002
-#define DLCI_BUFFER_IF		0x0008
-
-#define DLCI_VALID_FLAGS	0x000B
+#include <uapi/linux/if_frad.h>
 
-/* defines for the actual Frame Relay hardware */
-#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
-#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
-
-#define FRAD_LAST_IOCTL	FRAD_SET_CONF
-
-/*
- * Based on the setup for the Sangoma SDLA.  If changes are 
- * necessary to this structure, a routine will need to be 
- * added to that module to copy fields.
- */
-struct frad_conf 
-{
-   short station;
-   short flags;
-   short kbaud;
-   short clocking;
-   short mtu;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-
-/* Add new fields here, above is a mirror of the sdla_conf */
-
-};
-
-#define FRAD_STATION_CPE	0x0000
-#define FRAD_STATION_NODE	0x0001
-
-#define FRAD_TX_IGNORE_CIR	0x0001
-#define FRAD_RX_ACCOUNT_CIR	0x0002
-#define FRAD_DROP_ABORTED	0x0004
-#define FRAD_BUFFERIF		0x0008
-#define FRAD_STATS		0x0010
-#define FRAD_MCI		0x0100
-#define FRAD_AUTODLCI		0x8000
-#define FRAD_VALID_FLAGS	0x811F
-
-#define FRAD_CLOCK_INT		0x0001
-#define FRAD_CLOCK_EXT		0x0000
-
-#ifdef __KERNEL__
 
 #if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
 
@@ -188,6 +94,4 @@ struct frad_local
 
 extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/if_hippi.h b/include/linux/if_hippi.h
deleted file mode 100644
index cdc049f1829a..000000000000
--- a/include/linux/if_hippi.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the HIPPI interface.
- *
- * Version:	@(#)if_hippi.h	1.0.0	05/26/97
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *		Donald Becker, <becker@super.org>
- *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
- *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
- *		Jes Sorensen, <Jes.Sorensen@cern.ch>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
- 
-#ifndef _LINUX_IF_HIPPI_H
-#define _LINUX_IF_HIPPI_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*
- *	HIPPI magic constants.
- */
-
-#define HIPPI_ALEN	6		/* Bytes in one HIPPI hw-addr	   */
-#define HIPPI_HLEN	sizeof(struct hippi_hdr)
-#define HIPPI_ZLEN	0		/* Min. bytes in frame without FCS */
-#define HIPPI_DATA_LEN	65280		/* Max. bytes in payload	   */
-#define HIPPI_FRAME_LEN	(HIPPI_DATA_LEN + HIPPI_HLEN)
-					/* Max. bytes in frame without FCS */
-
-/*
- * Define LLC and SNAP constants.
- */
-#define HIPPI_EXTENDED_SAP	0xAA
-#define HIPPI_UI_CMD		0x03
-
-
-/*
- *	Do we need to list some sort of ID's here?
- */
-
-/*
- *	HIPPI statistics collection data. 
- */
- 
-struct hipnet_statistics {
-	int	rx_packets;		/* total packets received	*/
-	int	tx_packets;		/* total packets transmitted	*/
-	int	rx_errors;		/* bad packets received		*/
-	int	tx_errors;		/* packet transmit problems	*/
-	int	rx_dropped;		/* no space in linux buffers	*/
-	int	tx_dropped;		/* no space available in linux	*/
-
-	/* detailed rx_errors: */
-	int	rx_length_errors;
-	int	rx_over_errors;		/* receiver ring buff overflow	*/
-	int	rx_crc_errors;		/* recved pkt with crc error	*/
-	int	rx_frame_errors;	/* recv'd frame alignment error */
-	int	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	int	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	int	tx_aborted_errors;
-	int	tx_carrier_errors;
-	int	tx_fifo_errors;
-	int	tx_heartbeat_errors;
-	int	tx_window_errors;
-};
-
-
-struct hippi_fp_hdr {
-#if 0
-	__u8		ulp;				/* must contain 4 */
-#if defined (__BIG_ENDIAN_BITFIELD)
-	__u8		d1_data_present:1;		/* must be 1 */
-	__u8		start_d2_burst_boundary:1;	/* must be zero */
-	__u8		reserved:6;			/* must be zero */
-#if 0
-	__u16		reserved1:5;
-	__u16		d1_area_size:8;			/* must be 3 */
-	__u16		d2_offset:3;			/* must be zero */
-#endif
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8		reserved:6;			/* must be zero */
-	__u8	 	start_d2_burst_boundary:1;	/* must be zero */
-	__u8		d1_data_present:1;		/* must be 1 */
-#if 0
-	__u16		d2_offset:3;			/* must be zero */
-	__u16		d1_area_size:8;			/* must be 3 */
-	__u16		reserved1:5;			/* must be zero */
-#endif
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-#else
-	__be32		fixed;
-#endif
-	__be32		d2_size;
-} __attribute__((packed));
-
-struct hippi_le_hdr {
-#if defined (__BIG_ENDIAN_BITFIELD)
-	__u8		fc:3;
-	__u8		double_wide:1;
-	__u8		message_type:4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8		message_type:4;
-	__u8		double_wide:1;
-	__u8		fc:3;
-#endif
-	__u8		dest_switch_addr[3];
-#if defined (__BIG_ENDIAN_BITFIELD)
-	__u8		dest_addr_type:4,
-			src_addr_type:4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8		src_addr_type:4,
-			dest_addr_type:4;
-#endif
-	__u8		src_switch_addr[3];
-	__u16		reserved;
-	__u8		daddr[HIPPI_ALEN];
-	__u16		locally_administered;
-	__u8		saddr[HIPPI_ALEN];
-} __attribute__((packed));
-
-#define HIPPI_OUI_LEN	3
-/*
- * Looks like the dsap and ssap fields have been swapped by mistake in
- * RFC 2067 "IP over HIPPI".
- */
-struct hippi_snap_hdr {
-	__u8	dsap;			/* always 0xAA */
-	__u8	ssap;			/* always 0xAA */
-	__u8	ctrl;			/* always 0x03 */
-	__u8	oui[HIPPI_OUI_LEN];	/* organizational universal id (zero)*/
-	__be16	ethertype;		/* packet type ID field */
-} __attribute__((packed));
-
-struct hippi_hdr {
-	struct hippi_fp_hdr	fp;
-	struct hippi_le_hdr	le;
-	struct hippi_snap_hdr	snap;
-} __attribute__((packed));
-
-#endif	/* _LINUX_IF_HIPPI_H */
diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h
deleted file mode 100644
index 7d958475d4ac..000000000000
--- a/include/linux/if_infiniband.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available at
- * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
- * license, available in the LICENSE.TXT file accompanying this
- * software.  These details are also available at
- * <http://www.openfabrics.org/software_license.htm>.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- * Copyright (c) 2004 Topspin Communications.  All rights reserved.
- *
- * $Id$
- */
-
-#ifndef _LINUX_IF_INFINIBAND_H
-#define _LINUX_IF_INFINIBAND_H
-
-#define INFINIBAND_ALEN		20	/* Octets in IPoIB HW addr	*/
-
-#endif /* _LINUX_IF_INFINIBAND_H */
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index 3265f332998a..c3f817c3eb45 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -1,341 +1,8 @@
 #ifndef _LINUX_IF_LINK_H
 #define _LINUX_IF_LINK_H
 
-#include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/if_link.h>
 
-/* This struct should be in sync with struct rtnl_link_stats64 */
-struct rtnl_link_stats {
-	__u32	rx_packets;		/* total packets received	*/
-	__u32	tx_packets;		/* total packets transmitted	*/
-	__u32	rx_bytes;		/* total bytes received 	*/
-	__u32	tx_bytes;		/* total bytes transmitted	*/
-	__u32	rx_errors;		/* bad packets received		*/
-	__u32	tx_errors;		/* packet transmit problems	*/
-	__u32	rx_dropped;		/* no space in linux buffers	*/
-	__u32	tx_dropped;		/* no space available in linux	*/
-	__u32	multicast;		/* multicast packets received	*/
-	__u32	collisions;
-
-	/* detailed rx_errors: */
-	__u32	rx_length_errors;
-	__u32	rx_over_errors;		/* receiver ring buff overflow	*/
-	__u32	rx_crc_errors;		/* recved pkt with crc error	*/
-	__u32	rx_frame_errors;	/* recv'd frame alignment error */
-	__u32	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	__u32	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	__u32	tx_aborted_errors;
-	__u32	tx_carrier_errors;
-	__u32	tx_fifo_errors;
-	__u32	tx_heartbeat_errors;
-	__u32	tx_window_errors;
-
-	/* for cslip etc */
-	__u32	rx_compressed;
-	__u32	tx_compressed;
-};
-
-/* The main device statistics structure */
-struct rtnl_link_stats64 {
-	__u64	rx_packets;		/* total packets received	*/
-	__u64	tx_packets;		/* total packets transmitted	*/
-	__u64	rx_bytes;		/* total bytes received 	*/
-	__u64	tx_bytes;		/* total bytes transmitted	*/
-	__u64	rx_errors;		/* bad packets received		*/
-	__u64	tx_errors;		/* packet transmit problems	*/
-	__u64	rx_dropped;		/* no space in linux buffers	*/
-	__u64	tx_dropped;		/* no space available in linux	*/
-	__u64	multicast;		/* multicast packets received	*/
-	__u64	collisions;
-
-	/* detailed rx_errors: */
-	__u64	rx_length_errors;
-	__u64	rx_over_errors;		/* receiver ring buff overflow	*/
-	__u64	rx_crc_errors;		/* recved pkt with crc error	*/
-	__u64	rx_frame_errors;	/* recv'd frame alignment error */
-	__u64	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	__u64	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	__u64	tx_aborted_errors;
-	__u64	tx_carrier_errors;
-	__u64	tx_fifo_errors;
-	__u64	tx_heartbeat_errors;
-	__u64	tx_window_errors;
-
-	/* for cslip etc */
-	__u64	rx_compressed;
-	__u64	tx_compressed;
-};
-
-/* The struct should be in sync with struct ifmap */
-struct rtnl_link_ifmap {
-	__u64	mem_start;
-	__u64	mem_end;
-	__u64	base_addr;
-	__u16	irq;
-	__u8	dma;
-	__u8	port;
-};
-
-/*
- * IFLA_AF_SPEC
- *   Contains nested attributes for address family specific attributes.
- *   Each address family may create a attribute with the address family
- *   number as type and create its own attribute structure in it.
- *
- *   Example:
- *   [IFLA_AF_SPEC] = {
- *       [AF_INET] = {
- *           [IFLA_INET_CONF] = ...,
- *       },
- *       [AF_INET6] = {
- *           [IFLA_INET6_FLAGS] = ...,
- *           [IFLA_INET6_CONF] = ...,
- *       }
- *   }
- */
-
-enum {
-	IFLA_UNSPEC,
-	IFLA_ADDRESS,
-	IFLA_BROADCAST,
-	IFLA_IFNAME,
-	IFLA_MTU,
-	IFLA_LINK,
-	IFLA_QDISC,
-	IFLA_STATS,
-	IFLA_COST,
-#define IFLA_COST IFLA_COST
-	IFLA_PRIORITY,
-#define IFLA_PRIORITY IFLA_PRIORITY
-	IFLA_MASTER,
-#define IFLA_MASTER IFLA_MASTER
-	IFLA_WIRELESS,		/* Wireless Extension event - see wireless.h */
-#define IFLA_WIRELESS IFLA_WIRELESS
-	IFLA_PROTINFO,		/* Protocol specific information for a link */
-#define IFLA_PROTINFO IFLA_PROTINFO
-	IFLA_TXQLEN,
-#define IFLA_TXQLEN IFLA_TXQLEN
-	IFLA_MAP,
-#define IFLA_MAP IFLA_MAP
-	IFLA_WEIGHT,
-#define IFLA_WEIGHT IFLA_WEIGHT
-	IFLA_OPERSTATE,
-	IFLA_LINKMODE,
-	IFLA_LINKINFO,
-#define IFLA_LINKINFO IFLA_LINKINFO
-	IFLA_NET_NS_PID,
-	IFLA_IFALIAS,
-	IFLA_NUM_VF,		/* Number of VFs if device is SR-IOV PF */
-	IFLA_VFINFO_LIST,
-	IFLA_STATS64,
-	IFLA_VF_PORTS,
-	IFLA_PORT_SELF,
-	IFLA_AF_SPEC,
-	IFLA_GROUP,		/* Group the device belongs to */
-	IFLA_NET_NS_FD,
-	IFLA_EXT_MASK,		/* Extended info mask, VFs, etc */
-	IFLA_PROMISCUITY,	/* Promiscuity count: > 0 means acts PROMISC */
-#define IFLA_PROMISCUITY IFLA_PROMISCUITY
-	IFLA_NUM_TX_QUEUES,
-	IFLA_NUM_RX_QUEUES,
-	__IFLA_MAX
-};
-
-
-#define IFLA_MAX (__IFLA_MAX - 1)
-
-/* backwards compatibility for userspace */
-#ifndef __KERNEL__
-#define IFLA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
-#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
-#endif
-
-enum {
-	IFLA_INET_UNSPEC,
-	IFLA_INET_CONF,
-	__IFLA_INET_MAX,
-};
-
-#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
-
-/* ifi_flags.
-
-   IFF_* flags.
-
-   The only change is:
-   IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
-   more not changeable by user. They describe link media
-   characteristics and set by device driver.
-
-   Comments:
-   - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
-   - If neither of these three flags are set;
-     the interface is NBMA.
-
-   - IFF_MULTICAST does not mean anything special:
-   multicasts can be used on all not-NBMA links.
-   IFF_MULTICAST means that this media uses special encapsulation
-   for multicast frames. Apparently, all IFF_POINTOPOINT and
-   IFF_BROADCAST devices are able to use multicasts too.
- */
-
-/* IFLA_LINK.
-   For usual devices it is equal ifi_index.
-   If it is a "virtual interface" (f.e. tunnel), ifi_link
-   can point to real physical interface (f.e. for bandwidth calculations),
-   or maybe 0, what means, that real media is unknown (usual
-   for IPIP tunnels, when route to endpoint is allowed to change)
- */
-
-/* Subtype attributes for IFLA_PROTINFO */
-enum {
-	IFLA_INET6_UNSPEC,
-	IFLA_INET6_FLAGS,	/* link flags			*/
-	IFLA_INET6_CONF,	/* sysctl parameters		*/
-	IFLA_INET6_STATS,	/* statistics			*/
-	IFLA_INET6_MCAST,	/* MC things. What of them?	*/
-	IFLA_INET6_CACHEINFO,	/* time values and max reasm size */
-	IFLA_INET6_ICMP6STATS,	/* statistics (icmpv6)		*/
-	__IFLA_INET6_MAX
-};
-
-#define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
-
-struct ifla_cacheinfo {
-	__u32	max_reasm_len;
-	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
-	__u32	reachable_time;
-	__u32	retrans_time;
-};
-
-enum {
-	IFLA_INFO_UNSPEC,
-	IFLA_INFO_KIND,
-	IFLA_INFO_DATA,
-	IFLA_INFO_XSTATS,
-	__IFLA_INFO_MAX,
-};
-
-#define IFLA_INFO_MAX	(__IFLA_INFO_MAX - 1)
-
-/* VLAN section */
-
-enum {
-	IFLA_VLAN_UNSPEC,
-	IFLA_VLAN_ID,
-	IFLA_VLAN_FLAGS,
-	IFLA_VLAN_EGRESS_QOS,
-	IFLA_VLAN_INGRESS_QOS,
-	__IFLA_VLAN_MAX,
-};
-
-#define IFLA_VLAN_MAX	(__IFLA_VLAN_MAX - 1)
-
-struct ifla_vlan_flags {
-	__u32	flags;
-	__u32	mask;
-};
-
-enum {
-	IFLA_VLAN_QOS_UNSPEC,
-	IFLA_VLAN_QOS_MAPPING,
-	__IFLA_VLAN_QOS_MAX
-};
-
-#define IFLA_VLAN_QOS_MAX	(__IFLA_VLAN_QOS_MAX - 1)
-
-struct ifla_vlan_qos_mapping {
-	__u32 from;
-	__u32 to;
-};
-
-/* MACVLAN section */
-enum {
-	IFLA_MACVLAN_UNSPEC,
-	IFLA_MACVLAN_MODE,
-	IFLA_MACVLAN_FLAGS,
-	__IFLA_MACVLAN_MAX,
-};
-
-#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
-
-enum macvlan_mode {
-	MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
-	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
-	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
-	MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
-};
-
-#define MACVLAN_FLAG_NOPROMISC	1
-
-/* VXLAN section */
-enum {
-	IFLA_VXLAN_UNSPEC,
-	IFLA_VXLAN_ID,
-	IFLA_VXLAN_GROUP,
-	IFLA_VXLAN_LINK,
-	IFLA_VXLAN_LOCAL,
-	IFLA_VXLAN_TTL,
-	IFLA_VXLAN_TOS,
-	IFLA_VXLAN_LEARNING,
-	IFLA_VXLAN_AGEING,
-	IFLA_VXLAN_LIMIT,
-	IFLA_VXLAN_PORT_RANGE,
-	__IFLA_VXLAN_MAX
-};
-#define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
-
-struct ifla_vxlan_port_range {
-	__be16	low;
-	__be16	high;
-};
-
-/* SR-IOV virtual function management section */
-
-enum {
-	IFLA_VF_INFO_UNSPEC,
-	IFLA_VF_INFO,
-	__IFLA_VF_INFO_MAX,
-};
-
-#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
-
-enum {
-	IFLA_VF_UNSPEC,
-	IFLA_VF_MAC,		/* Hardware queue specific attributes */
-	IFLA_VF_VLAN,
-	IFLA_VF_TX_RATE,	/* TX Bandwidth Allocation */
-	IFLA_VF_SPOOFCHK,	/* Spoof Checking on/off switch */
-	__IFLA_VF_MAX,
-};
-
-#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
-
-struct ifla_vf_mac {
-	__u32 vf;
-	__u8 mac[32]; /* MAX_ADDR_LEN */
-};
-
-struct ifla_vf_vlan {
-	__u32 vf;
-	__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
-	__u32 qos;
-};
-
-struct ifla_vf_tx_rate {
-	__u32 vf;
-	__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
-};
-
-struct ifla_vf_spoofchk {
-	__u32 vf;
-	__u32 setting;
-};
-#ifdef __KERNEL__
 
 /* We don't want this structure exposed to user space */
 struct ifla_vf_info {
@@ -346,96 +13,4 @@ struct ifla_vf_info {
 	__u32 tx_rate;
 	__u32 spoofchk;
 };
-#endif
-
-/* VF ports management section
- *
- *	Nested layout of set/get msg is:
- *
- *		[IFLA_NUM_VF]
- *		[IFLA_VF_PORTS]
- *			[IFLA_VF_PORT]
- *				[IFLA_PORT_*], ...
- *			[IFLA_VF_PORT]
- *				[IFLA_PORT_*], ...
- *			...
- *		[IFLA_PORT_SELF]
- *			[IFLA_PORT_*], ...
- */
-
-enum {
-	IFLA_VF_PORT_UNSPEC,
-	IFLA_VF_PORT,			/* nest */
-	__IFLA_VF_PORT_MAX,
-};
-
-#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
-
-enum {
-	IFLA_PORT_UNSPEC,
-	IFLA_PORT_VF,			/* __u32 */
-	IFLA_PORT_PROFILE,		/* string */
-	IFLA_PORT_VSI_TYPE,		/* 802.1Qbg (pre-)standard VDP */
-	IFLA_PORT_INSTANCE_UUID,	/* binary UUID */
-	IFLA_PORT_HOST_UUID,		/* binary UUID */
-	IFLA_PORT_REQUEST,		/* __u8 */
-	IFLA_PORT_RESPONSE,		/* __u16, output only */
-	__IFLA_PORT_MAX,
-};
-
-#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
-
-#define PORT_PROFILE_MAX	40
-#define PORT_UUID_MAX		16
-#define PORT_SELF_VF		-1
-
-enum {
-	PORT_REQUEST_PREASSOCIATE = 0,
-	PORT_REQUEST_PREASSOCIATE_RR,
-	PORT_REQUEST_ASSOCIATE,
-	PORT_REQUEST_DISASSOCIATE,
-};
-
-enum {
-	PORT_VDP_RESPONSE_SUCCESS = 0,
-	PORT_VDP_RESPONSE_INVALID_FORMAT,
-	PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
-	PORT_VDP_RESPONSE_UNUSED_VTID,
-	PORT_VDP_RESPONSE_VTID_VIOLATION,
-	PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
-	PORT_VDP_RESPONSE_OUT_OF_SYNC,
-	/* 0x08-0xFF reserved for future VDP use */
-	PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
-	PORT_PROFILE_RESPONSE_INPROGRESS,
-	PORT_PROFILE_RESPONSE_INVALID,
-	PORT_PROFILE_RESPONSE_BADSTATE,
-	PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
-	PORT_PROFILE_RESPONSE_ERROR,
-};
-
-struct ifla_port_vsi {
-	__u8 vsi_mgr_id;
-	__u8 vsi_type_id[3];
-	__u8 vsi_type_version;
-	__u8 pad[3];
-};
-
-
-/* IPoIB section */
-
-enum {
-	IFLA_IPOIB_UNSPEC,
-	IFLA_IPOIB_PKEY,
-	IFLA_IPOIB_MODE,
-	IFLA_IPOIB_UMCAST,
-	__IFLA_IPOIB_MAX
-};
-
-enum {
-	IPOIB_MODE_DATAGRAM  = 0, /* using unreliable datagram QPs */
-	IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
-};
-
-#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
-
 #endif /* _LINUX_IF_LINK_H */
diff --git a/include/linux/if_ltalk.h b/include/linux/if_ltalk.h
index 76525760ba48..81e434c50790 100644
--- a/include/linux/if_ltalk.h
+++ b/include/linux/if_ltalk.h
@@ -1,12 +1,7 @@
 #ifndef __LINUX_LTALK_H
 #define __LINUX_LTALK_H
 
-#define LTALK_HLEN		1
-#define LTALK_MTU		600
-#define LTALK_ALEN		1
+#include <uapi/linux/if_ltalk.h>
 
-#ifdef __KERNEL__
 extern struct net_device *alloc_ltalkdev(int sizeof_priv);
 #endif
-
-#endif
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
deleted file mode 100644
index f3799295d231..000000000000
--- a/include/linux/if_packet.h
+++ /dev/null
@@ -1,272 +0,0 @@
-#ifndef __LINUX_IF_PACKET_H
-#define __LINUX_IF_PACKET_H
-
-#include <linux/types.h>
-
-struct sockaddr_pkt {
-	unsigned short spkt_family;
-	unsigned char spkt_device[14];
-	__be16 spkt_protocol;
-};
-
-struct sockaddr_ll {
-	unsigned short	sll_family;
-	__be16		sll_protocol;
-	int		sll_ifindex;
-	unsigned short	sll_hatype;
-	unsigned char	sll_pkttype;
-	unsigned char	sll_halen;
-	unsigned char	sll_addr[8];
-};
-
-/* Packet types */
-
-#define PACKET_HOST		0		/* To us		*/
-#define PACKET_BROADCAST	1		/* To all		*/
-#define PACKET_MULTICAST	2		/* To group		*/
-#define PACKET_OTHERHOST	3		/* To someone else 	*/
-#define PACKET_OUTGOING		4		/* Outgoing of any type */
-/* These ones are invisible by user level */
-#define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
-#define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
-
-/* Packet socket options */
-
-#define PACKET_ADD_MEMBERSHIP		1
-#define PACKET_DROP_MEMBERSHIP		2
-#define PACKET_RECV_OUTPUT		3
-/* Value 4 is still used by obsolete turbo-packet. */
-#define PACKET_RX_RING			5
-#define PACKET_STATISTICS		6
-#define PACKET_COPY_THRESH		7
-#define PACKET_AUXDATA			8
-#define PACKET_ORIGDEV			9
-#define PACKET_VERSION			10
-#define PACKET_HDRLEN			11
-#define PACKET_RESERVE			12
-#define PACKET_TX_RING			13
-#define PACKET_LOSS			14
-#define PACKET_VNET_HDR			15
-#define PACKET_TX_TIMESTAMP		16
-#define PACKET_TIMESTAMP		17
-#define PACKET_FANOUT			18
-
-#define PACKET_FANOUT_HASH		0
-#define PACKET_FANOUT_LB		1
-#define PACKET_FANOUT_CPU		2
-#define PACKET_FANOUT_FLAG_DEFRAG	0x8000
-
-struct tpacket_stats {
-	unsigned int	tp_packets;
-	unsigned int	tp_drops;
-};
-
-struct tpacket_stats_v3 {
-	unsigned int	tp_packets;
-	unsigned int	tp_drops;
-	unsigned int	tp_freeze_q_cnt;
-};
-
-union tpacket_stats_u {
-	struct tpacket_stats stats1;
-	struct tpacket_stats_v3 stats3;
-};
-
-struct tpacket_auxdata {
-	__u32		tp_status;
-	__u32		tp_len;
-	__u32		tp_snaplen;
-	__u16		tp_mac;
-	__u16		tp_net;
-	__u16		tp_vlan_tci;
-	__u16		tp_padding;
-};
-
-/* Rx ring - header status */
-#define TP_STATUS_KERNEL	0x0
-#define TP_STATUS_USER		0x1
-#define TP_STATUS_COPY		0x2
-#define TP_STATUS_LOSING	0x4
-#define TP_STATUS_CSUMNOTREADY	0x8
-#define TP_STATUS_VLAN_VALID   0x10 /* auxdata has valid tp_vlan_tci */
-#define TP_STATUS_BLK_TMO	0x20
-
-/* Tx ring - header status */
-#define TP_STATUS_AVAILABLE	0x0
-#define TP_STATUS_SEND_REQUEST	0x1
-#define TP_STATUS_SENDING	0x2
-#define TP_STATUS_WRONG_FORMAT	0x4
-
-/* Rx ring - feature request bits */
-#define TP_FT_REQ_FILL_RXHASH	0x1
-
-struct tpacket_hdr {
-	unsigned long	tp_status;
-	unsigned int	tp_len;
-	unsigned int	tp_snaplen;
-	unsigned short	tp_mac;
-	unsigned short	tp_net;
-	unsigned int	tp_sec;
-	unsigned int	tp_usec;
-};
-
-#define TPACKET_ALIGNMENT	16
-#define TPACKET_ALIGN(x)	(((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1))
-#define TPACKET_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll))
-
-struct tpacket2_hdr {
-	__u32		tp_status;
-	__u32		tp_len;
-	__u32		tp_snaplen;
-	__u16		tp_mac;
-	__u16		tp_net;
-	__u32		tp_sec;
-	__u32		tp_nsec;
-	__u16		tp_vlan_tci;
-	__u16		tp_padding;
-};
-
-struct tpacket_hdr_variant1 {
-	__u32	tp_rxhash;
-	__u32	tp_vlan_tci;
-};
-
-struct tpacket3_hdr {
-	__u32		tp_next_offset;
-	__u32		tp_sec;
-	__u32		tp_nsec;
-	__u32		tp_snaplen;
-	__u32		tp_len;
-	__u32		tp_status;
-	__u16		tp_mac;
-	__u16		tp_net;
-	/* pkt_hdr variants */
-	union {
-		struct tpacket_hdr_variant1 hv1;
-	};
-};
-
-struct tpacket_bd_ts {
-	unsigned int ts_sec;
-	union {
-		unsigned int ts_usec;
-		unsigned int ts_nsec;
-	};
-};
-
-struct tpacket_hdr_v1 {
-	__u32	block_status;
-	__u32	num_pkts;
-	__u32	offset_to_first_pkt;
-
-	/* Number of valid bytes (including padding)
-	 * blk_len <= tp_block_size
-	 */
-	__u32	blk_len;
-
-	/*
-	 * Quite a few uses of sequence number:
-	 * 1. Make sure cache flush etc worked.
-	 *    Well, one can argue - why not use the increasing ts below?
-	 *    But look at 2. below first.
-	 * 2. When you pass around blocks to other user space decoders,
-	 *    you can see which blk[s] is[are] outstanding etc.
-	 * 3. Validate kernel code.
-	 */
-	__aligned_u64	seq_num;
-
-	/*
-	 * ts_last_pkt:
-	 *
-	 * Case 1.	Block has 'N'(N >=1) packets and TMO'd(timed out)
-	 *		ts_last_pkt == 'time-stamp of last packet' and NOT the
-	 *		time when the timer fired and the block was closed.
-	 *		By providing the ts of the last packet we can absolutely
-	 *		guarantee that time-stamp wise, the first packet in the
-	 *		next block will never precede the last packet of the
-	 *		previous block.
-	 * Case 2.	Block has zero packets and TMO'd
-	 *		ts_last_pkt = time when the timer fired and the block
-	 *		was closed.
-	 * Case 3.	Block has 'N' packets and NO TMO.
-	 *		ts_last_pkt = time-stamp of the last pkt in the block.
-	 *
-	 * ts_first_pkt:
-	 *		Is always the time-stamp when the block was opened.
-	 *		Case a)	ZERO packets
-	 *			No packets to deal with but atleast you know the
-	 *			time-interval of this block.
-	 *		Case b) Non-zero packets
-	 *			Use the ts of the first packet in the block.
-	 *
-	 */
-	struct tpacket_bd_ts	ts_first_pkt, ts_last_pkt;
-};
-
-union tpacket_bd_header_u {
-	struct tpacket_hdr_v1 bh1;
-};
-
-struct tpacket_block_desc {
-	__u32 version;
-	__u32 offset_to_priv;
-	union tpacket_bd_header_u hdr;
-};
-
-#define TPACKET2_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
-#define TPACKET3_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket3_hdr)) + sizeof(struct sockaddr_ll))
-
-enum tpacket_versions {
-	TPACKET_V1,
-	TPACKET_V2,
-	TPACKET_V3
-};
-
-/*
-   Frame structure:
-
-   - Start. Frame must be aligned to TPACKET_ALIGNMENT=16
-   - struct tpacket_hdr
-   - pad to TPACKET_ALIGNMENT=16
-   - struct sockaddr_ll
-   - Gap, chosen so that packet data (Start+tp_net) alignes to TPACKET_ALIGNMENT=16
-   - Start+tp_mac: [ Optional MAC header ]
-   - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
-   - Pad to align to TPACKET_ALIGNMENT=16
- */
-
-struct tpacket_req {
-	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
-	unsigned int	tp_block_nr;	/* Number of blocks */
-	unsigned int	tp_frame_size;	/* Size of frame */
-	unsigned int	tp_frame_nr;	/* Total number of frames */
-};
-
-struct tpacket_req3 {
-	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
-	unsigned int	tp_block_nr;	/* Number of blocks */
-	unsigned int	tp_frame_size;	/* Size of frame */
-	unsigned int	tp_frame_nr;	/* Total number of frames */
-	unsigned int	tp_retire_blk_tov; /* timeout in msecs */
-	unsigned int	tp_sizeof_priv; /* offset to private data area */
-	unsigned int	tp_feature_req_word;
-};
-
-union tpacket_req_u {
-	struct tpacket_req	req;
-	struct tpacket_req3	req3;
-};
-
-struct packet_mreq {
-	int		mr_ifindex;
-	unsigned short	mr_type;
-	unsigned short	mr_alen;
-	unsigned char	mr_address[8];
-};
-
-#define PACKET_MR_MULTICAST	0
-#define PACKET_MR_PROMISC	1
-#define PACKET_MR_ALLMULTI	2
-#define PACKET_MR_UNICAST	3
-
-#endif
diff --git a/include/linux/if_phonet.h b/include/linux/if_phonet.h
index d70034bcec05..bbcdb0a767d8 100644
--- a/include/linux/if_phonet.h
+++ b/include/linux/if_phonet.h
@@ -8,12 +8,7 @@
 #ifndef LINUX_IF_PHONET_H
 #define LINUX_IF_PHONET_H
 
-#define PHONET_MIN_MTU		6	/* pn_length = 0 */
-#define PHONET_MAX_MTU		65541	/* pn_length = 0xffff */
-#define PHONET_DEV_MTU		PHONET_MAX_MTU
+#include <uapi/linux/if_phonet.h>
 
-#ifdef __KERNEL__
 extern struct header_ops phonet_header_ops;
 #endif
-
-#endif
diff --git a/include/linux/if_plip.h b/include/linux/if_plip.h
deleted file mode 100644
index 6298c7e88b2b..000000000000
--- a/include/linux/if_plip.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *	NET3	PLIP tuning facilities for the new Niibe PLIP.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- */
- 
-#ifndef _LINUX_IF_PLIP_H
-#define _LINUX_IF_PLIP_H
-
-#include <linux/sockios.h>
-
-#define	SIOCDEVPLIP	SIOCDEVPRIVATE
-
-struct plipconf {
-	unsigned short pcmd;
-	unsigned long  nibble;
-	unsigned long  trigger;
-};
-
-#define PLIP_GET_TIMEOUT	0x1
-#define PLIP_SET_TIMEOUT	0x2
-
-#endif
diff --git a/include/linux/if_ppp.h b/include/linux/if_ppp.h
deleted file mode 100644
index 9048fabb7a4e..000000000000
--- a/include/linux/if_ppp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/ppp-ioctl.h>
diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h
index b4775418d525..0fb71e532b2c 100644
--- a/include/linux/if_pppol2tp.h
+++ b/include/linux/if_pppol2tp.h
@@ -11,98 +11,11 @@
  *		2 of the License, or (at your option) any later version.
  *
  */
-
 #ifndef __LINUX_IF_PPPOL2TP_H
 #define __LINUX_IF_PPPOL2TP_H
 
-#include <linux/types.h>
-
-#ifdef __KERNEL__
 #include <linux/in.h>
 #include <linux/in6.h>
-#endif
-
-/* Structure used to connect() the socket to a particular tunnel UDP
- * socket over IPv4.
- */
-struct pppol2tp_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP socket to use */
-
-	struct sockaddr_in addr;	/* IP address and port to send to */
-
-	__u16 s_tunnel, s_session;	/* For matching incoming packets */
-	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
-};
-
-/* Structure used to connect() the socket to a particular tunnel UDP
- * socket over IPv6.
- */
-struct pppol2tpin6_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP socket to use */
-
-	__u16 s_tunnel, s_session;	/* For matching incoming packets */
-	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
-
-	struct sockaddr_in6 addr;	/* IP address and port to send to */
-};
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct pppol2tpv3_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP or IP socket to use */
-
-	struct sockaddr_in addr;	/* IP address and port to send to */
-
-	__u32 s_tunnel, s_session;	/* For matching incoming packets */
-	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
-};
-
-struct pppol2tpv3in6_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP or IP socket to use */
-
-	__u32 s_tunnel, s_session;	/* For matching incoming packets */
-	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
-
-	struct sockaddr_in6 addr;	/* IP address and port to send to */
-};
-
-/* Socket options:
- * DEBUG	- bitmask of debug message categories
- * SENDSEQ	- 0 => don't send packets with sequence numbers
- *		  1 => send packets with sequence numbers
- * RECVSEQ	- 0 => receive packet sequence numbers are optional
- *		  1 => drop receive packets without sequence numbers
- * LNSMODE	- 0 => act as LAC.
- *		  1 => act as LNS.
- * REORDERTO	- reorder timeout (in millisecs). If 0, don't try to reorder.
- */
-enum {
-	PPPOL2TP_SO_DEBUG	= 1,
-	PPPOL2TP_SO_RECVSEQ	= 2,
-	PPPOL2TP_SO_SENDSEQ	= 3,
-	PPPOL2TP_SO_LNSMODE	= 4,
-	PPPOL2TP_SO_REORDERTO	= 5,
-};
-
-/* Debug message categories for the DEBUG socket option */
-enum {
-	PPPOL2TP_MSG_DEBUG	= (1 << 0),	/* verbose debug (if
-						 * compiled in) */
-	PPPOL2TP_MSG_CONTROL	= (1 << 1),	/* userspace - kernel
-						 * interface */
-	PPPOL2TP_MSG_SEQ	= (1 << 2),	/* sequence numbers */
-	PPPOL2TP_MSG_DATA	= (1 << 3),	/* data packets */
-};
-
-
+#include <uapi/linux/if_pppol2tp.h>
 
 #endif
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
index 09c474c480cd..aff7ad8a4ea3 100644
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -12,153 +12,14 @@
  *		2 of the License, or (at your option) any later version.
  *
  */
-
 #ifndef __LINUX_IF_PPPOX_H
 #define __LINUX_IF_PPPOX_H
 
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#include <linux/socket.h>
-#include <linux/if_ether.h>
-#ifdef  __KERNEL__
 #include <linux/if.h>
 #include <linux/netdevice.h>
 #include <linux/ppp_channel.h>
-#endif /* __KERNEL__ */
-#include <linux/if_pppol2tp.h>
-
-/* For user-space programs to pick up these definitions
- * which they wouldn't get otherwise without defining __KERNEL__
- */
-#ifndef AF_PPPOX
-#define AF_PPPOX	24
-#define PF_PPPOX	AF_PPPOX
-#endif /* !(AF_PPPOX) */
-
-/************************************************************************ 
- * PPPoE addressing definition 
- */ 
-typedef __be16 sid_t;
-struct pppoe_addr {
-	sid_t         sid;                    /* Session identifier */
-	unsigned char remote[ETH_ALEN];       /* Remote address */
-	char          dev[IFNAMSIZ];          /* Local device to use */
-}; 
- 
-/************************************************************************ 
- * PPTP addressing definition
- */
-struct pptp_addr {
-	__be16		call_id;
-	struct in_addr	sin_addr;
-};
-
-/************************************************************************
- * Protocols supported by AF_PPPOX
- */
-#define PX_PROTO_OE    0 /* Currently just PPPoE */
-#define PX_PROTO_OL2TP 1 /* Now L2TP also */
-#define PX_PROTO_PPTP  2
-#define PX_MAX_PROTO   3
-
-struct sockaddr_pppox {
-	__kernel_sa_family_t sa_family;       /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;          /* protocol identifier */
-	union {
-		struct pppoe_addr  pppoe;
-		struct pptp_addr   pptp;
-	} sa_addr;
-} __packed;
-
-/* The use of the above union isn't viable because the size of this
- * struct must stay fixed over time -- applications use sizeof(struct
- * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
- * type instead.
- */
-struct sockaddr_pppol2tp {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tp_addr pppol2tp;
-} __packed;
-
-struct sockaddr_pppol2tpin6 {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tpin6_addr pppol2tp;
-} __packed;
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct sockaddr_pppol2tpv3 {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tpv3_addr pppol2tp;
-} __packed;
-
-struct sockaddr_pppol2tpv3in6 {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tpv3in6_addr pppol2tp;
-} __packed;
-
-/*********************************************************************
- *
- * ioctl interface for defining forwarding of connections
- *
- ********************************************************************/
-
-#define PPPOEIOCSFWD	_IOW(0xB1 ,0, size_t)
-#define PPPOEIOCDFWD	_IO(0xB1 ,1)
-/*#define PPPOEIOCGFWD	_IOWR(0xB1,2, size_t)*/
-
-/* Codes to identify message types */
-#define PADI_CODE	0x09
-#define PADO_CODE	0x07
-#define PADR_CODE	0x19
-#define PADS_CODE	0x65
-#define PADT_CODE	0xa7
-struct pppoe_tag {
-	__be16 tag_type;
-	__be16 tag_len;
-	char tag_data[0];
-} __attribute__ ((packed));
-
-/* Tag identifiers */
-#define PTT_EOL		__cpu_to_be16(0x0000)
-#define PTT_SRV_NAME	__cpu_to_be16(0x0101)
-#define PTT_AC_NAME	__cpu_to_be16(0x0102)
-#define PTT_HOST_UNIQ	__cpu_to_be16(0x0103)
-#define PTT_AC_COOKIE	__cpu_to_be16(0x0104)
-#define PTT_VENDOR 	__cpu_to_be16(0x0105)
-#define PTT_RELAY_SID	__cpu_to_be16(0x0110)
-#define PTT_SRV_ERR     __cpu_to_be16(0x0201)
-#define PTT_SYS_ERR  	__cpu_to_be16(0x0202)
-#define PTT_GEN_ERR  	__cpu_to_be16(0x0203)
-
-struct pppoe_hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 ver : 4;
-	__u8 type : 4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8 type : 4;
-	__u8 ver : 4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8 code;
-	__be16 sid;
-	__be16 length;
-	struct pppoe_tag tag[0];
-} __packed;
-
-/* Length of entire PPPoE + PPP header */
-#define PPPOE_SES_HLEN	8
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/if_pppox.h>
 
 static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb)
 {
@@ -232,6 +93,4 @@ enum {
     PPPOX_DEAD		= 16  /* dead, useless, please clean me up!*/
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* !(__LINUX_IF_PPPOX_H) */
diff --git a/include/linux/if_slip.h b/include/linux/if_slip.h
deleted file mode 100644
index 1eb4e3a8397a..000000000000
--- a/include/linux/if_slip.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *	Swansea University Computer Society	NET3
- *	
- *	This file declares the constants of special use with the SLIP/CSLIP/
- *	KISS TNC driver.
- */
- 
-#ifndef __LINUX_SLIP_H
-#define __LINUX_SLIP_H
-
-#define		SL_MODE_SLIP		0
-#define		SL_MODE_CSLIP		1
-#define 	SL_MODE_KISS		4
-
-#define		SL_OPT_SIXBIT		2
-#define		SL_OPT_ADAPTIVE		8
-
-/*
- *	VSV = ioctl for keepalive & outfill in SLIP driver 
- */
- 
-#define SIOCSKEEPALIVE	(SIOCDEVPRIVATE)		/* Set keepalive timeout in sec */
-#define SIOCGKEEPALIVE	(SIOCDEVPRIVATE+1)		/* Get keepalive timeout */
-#define SIOCSOUTFILL	(SIOCDEVPRIVATE+2)		/* Set outfill timeout */
-#define	SIOCGOUTFILL	(SIOCDEVPRIVATE+3)		/* Get outfill timeout */
-#define SIOCSLEASE	(SIOCDEVPRIVATE+4)		/* Set "leased" line type */
-#define	SIOCGLEASE	(SIOCDEVPRIVATE+5)		/* Get line type */
-
-
-#endif
diff --git a/include/linux/if_team.h b/include/linux/if_team.h
index 6d88a7f57680..0245def2aa93 100644
--- a/include/linux/if_team.h
+++ b/include/linux/if_team.h
@@ -7,14 +7,13 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
 #ifndef _LINUX_IF_TEAM_H_
 #define _LINUX_IF_TEAM_H_
 
-#ifdef __KERNEL__
 
 #include <linux/netpoll.h>
 #include <net/sch_generic.h>
+#include <uapi/linux/if_team.h>
 
 struct team_pcpu_stats {
 	u64			rx_packets;
@@ -251,98 +250,4 @@ extern void team_mode_unregister(const struct team_mode *mode);
 #define TEAM_DEFAULT_NUM_TX_QUEUES 16
 #define TEAM_DEFAULT_NUM_RX_QUEUES 16
 
-#endif /* __KERNEL__ */
-
-#define TEAM_STRING_MAX_LEN 32
-
-/**********************************
- * NETLINK_GENERIC netlink family.
- **********************************/
-
-enum {
-	TEAM_CMD_NOOP,
-	TEAM_CMD_OPTIONS_SET,
-	TEAM_CMD_OPTIONS_GET,
-	TEAM_CMD_PORT_LIST_GET,
-
-	__TEAM_CMD_MAX,
-	TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
-};
-
-enum {
-	TEAM_ATTR_UNSPEC,
-	TEAM_ATTR_TEAM_IFINDEX,		/* u32 */
-	TEAM_ATTR_LIST_OPTION,		/* nest */
-	TEAM_ATTR_LIST_PORT,		/* nest */
-
-	__TEAM_ATTR_MAX,
-	TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
-};
-
-/* Nested layout of get/set msg:
- *
- *	[TEAM_ATTR_LIST_OPTION]
- *		[TEAM_ATTR_ITEM_OPTION]
- *			[TEAM_ATTR_OPTION_*], ...
- *		[TEAM_ATTR_ITEM_OPTION]
- *			[TEAM_ATTR_OPTION_*], ...
- *		...
- *	[TEAM_ATTR_LIST_PORT]
- *		[TEAM_ATTR_ITEM_PORT]
- *			[TEAM_ATTR_PORT_*], ...
- *		[TEAM_ATTR_ITEM_PORT]
- *			[TEAM_ATTR_PORT_*], ...
- *		...
- */
-
-enum {
-	TEAM_ATTR_ITEM_OPTION_UNSPEC,
-	TEAM_ATTR_ITEM_OPTION,		/* nest */
-
-	__TEAM_ATTR_ITEM_OPTION_MAX,
-	TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_OPTION_UNSPEC,
-	TEAM_ATTR_OPTION_NAME,		/* string */
-	TEAM_ATTR_OPTION_CHANGED,	/* flag */
-	TEAM_ATTR_OPTION_TYPE,		/* u8 */
-	TEAM_ATTR_OPTION_DATA,		/* dynamic */
-	TEAM_ATTR_OPTION_REMOVED,	/* flag */
-	TEAM_ATTR_OPTION_PORT_IFINDEX,	/* u32 */ /* for per-port options */
-	TEAM_ATTR_OPTION_ARRAY_INDEX,	/* u32 */ /* for array options */
-
-	__TEAM_ATTR_OPTION_MAX,
-	TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_ITEM_PORT_UNSPEC,
-	TEAM_ATTR_ITEM_PORT,		/* nest */
-
-	__TEAM_ATTR_ITEM_PORT_MAX,
-	TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_PORT_UNSPEC,
-	TEAM_ATTR_PORT_IFINDEX,		/* u32 */
-	TEAM_ATTR_PORT_CHANGED,		/* flag */
-	TEAM_ATTR_PORT_LINKUP,		/* flag */
-	TEAM_ATTR_PORT_SPEED,		/* u32 */
-	TEAM_ATTR_PORT_DUPLEX,		/* u8 */
-	TEAM_ATTR_PORT_REMOVED,		/* flag */
-
-	__TEAM_ATTR_PORT_MAX,
-	TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define TEAM_GENL_NAME "team"
-#define TEAM_GENL_VERSION 0x1
-#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
-
 #endif /* _LINUX_IF_TEAM_H_ */
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 06b1829731fd..ed6da2e6df90 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -12,86 +12,11 @@
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  *  GNU General Public License for more details.
  */
-
 #ifndef __IF_TUN_H
 #define __IF_TUN_H
 
-#include <linux/types.h>
-#include <linux/if_ether.h>
-#include <linux/filter.h>
-
-/* Read queue size */
-#define TUN_READQ_SIZE	500
-
-/* TUN device flags */
-#define TUN_TUN_DEV 	0x0001	
-#define TUN_TAP_DEV	0x0002
-#define TUN_TYPE_MASK   0x000f
-
-#define TUN_FASYNC	0x0010
-#define TUN_NOCHECKSUM	0x0020
-#define TUN_NO_PI	0x0040
-#define TUN_ONE_QUEUE	0x0080
-#define TUN_PERSIST 	0x0100	
-#define TUN_VNET_HDR 	0x0200
-
-/* Ioctl defines */
-#define TUNSETNOCSUM  _IOW('T', 200, int) 
-#define TUNSETDEBUG   _IOW('T', 201, int) 
-#define TUNSETIFF     _IOW('T', 202, int) 
-#define TUNSETPERSIST _IOW('T', 203, int) 
-#define TUNSETOWNER   _IOW('T', 204, int)
-#define TUNSETLINK    _IOW('T', 205, int)
-#define TUNSETGROUP   _IOW('T', 206, int)
-#define TUNGETFEATURES _IOR('T', 207, unsigned int)
-#define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
-#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
-#define TUNGETIFF      _IOR('T', 210, unsigned int)
-#define TUNGETSNDBUF   _IOR('T', 211, int)
-#define TUNSETSNDBUF   _IOW('T', 212, int)
-#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
-#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
-#define TUNGETVNETHDRSZ _IOR('T', 215, int)
-#define TUNSETVNETHDRSZ _IOW('T', 216, int)
-
-/* TUNSETIFF ifr flags */
-#define IFF_TUN		0x0001
-#define IFF_TAP		0x0002
-#define IFF_NO_PI	0x1000
-#define IFF_ONE_QUEUE	0x2000
-#define IFF_VNET_HDR	0x4000
-#define IFF_TUN_EXCL	0x8000
-
-/* Features for GSO (TUNSETOFFLOAD). */
-#define TUN_F_CSUM	0x01	/* You can hand me unchecksummed packets. */
-#define TUN_F_TSO4	0x02	/* I can handle TSO for IPv4 packets */
-#define TUN_F_TSO6	0x04	/* I can handle TSO for IPv6 packets */
-#define TUN_F_TSO_ECN	0x08	/* I can handle TSO with ECN bits. */
-#define TUN_F_UFO	0x10	/* I can handle UFO packets */
-
-/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
-#define TUN_PKT_STRIP	0x0001
-struct tun_pi {
-	__u16  flags;
-	__be16 proto;
-};
-
-/*
- * Filter spec (used for SETXXFILTER ioctls)
- * This stuff is applicable only to the TAP (Ethernet) devices.
- * If the count is zero the filter is disabled and the driver accepts
- * all packets (promisc mode).
- * If the filter is enabled in order to accept broadcast packets
- * broadcast addr must be explicitly included in the addr list.
- */
-#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
-struct tun_filter {
-	__u16  flags; /* TUN_FLT_ flags see above */
-	__u16  count; /* Number of addresses */
-	__u8   addr[0][ETH_ALEN];
-};
+#include <uapi/linux/if_tun.h>
 
-#ifdef __KERNEL__
 #if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE)
 struct socket *tun_get_socket(struct file *);
 #else
@@ -104,5 +29,4 @@ static inline struct socket *tun_get_socket(struct file *f)
 	return ERR_PTR(-EINVAL);
 }
 #endif /* CONFIG_TUN */
-#endif /* __KERNEL__ */
 #endif /* __IF_TUN_H */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 8c5035ac3142..1cc595a67cc9 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -1,100 +1,8 @@
 #ifndef _IF_TUNNEL_H_
 #define _IF_TUNNEL_H_
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#ifdef __KERNEL__
 #include <linux/ip.h>
 #include <linux/in6.h>
-#endif
-
-#define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
-#define SIOCADDTUNNEL   (SIOCDEVPRIVATE + 1)
-#define SIOCDELTUNNEL   (SIOCDEVPRIVATE + 2)
-#define SIOCCHGTUNNEL   (SIOCDEVPRIVATE + 3)
-#define SIOCGETPRL      (SIOCDEVPRIVATE + 4)
-#define SIOCADDPRL      (SIOCDEVPRIVATE + 5)
-#define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
-#define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)
-#define SIOCGET6RD      (SIOCDEVPRIVATE + 8)
-#define SIOCADD6RD      (SIOCDEVPRIVATE + 9)
-#define SIOCDEL6RD      (SIOCDEVPRIVATE + 10)
-#define SIOCCHG6RD      (SIOCDEVPRIVATE + 11)
-
-#define GRE_CSUM	__cpu_to_be16(0x8000)
-#define GRE_ROUTING	__cpu_to_be16(0x4000)
-#define GRE_KEY		__cpu_to_be16(0x2000)
-#define GRE_SEQ		__cpu_to_be16(0x1000)
-#define GRE_STRICT	__cpu_to_be16(0x0800)
-#define GRE_REC		__cpu_to_be16(0x0700)
-#define GRE_FLAGS	__cpu_to_be16(0x00F8)
-#define GRE_VERSION	__cpu_to_be16(0x0007)
-
-struct ip_tunnel_parm {
-	char			name[IFNAMSIZ];
-	int			link;
-	__be16			i_flags;
-	__be16			o_flags;
-	__be32			i_key;
-	__be32			o_key;
-	struct iphdr		iph;
-};
-
-/* SIT-mode i_flags */
-#define	SIT_ISATAP	0x0001
-
-struct ip_tunnel_prl {
-	__be32			addr;
-	__u16			flags;
-	__u16			__reserved;
-	__u32			datalen;
-	__u32			__reserved2;
-	/* data follows */
-};
-
-/* PRL flags */
-#define	PRL_DEFAULT		0x0001
-
-struct ip_tunnel_6rd {
-	struct in6_addr		prefix;
-	__be32			relay_prefix;
-	__u16			prefixlen;
-	__u16			relay_prefixlen;
-};
-
-enum {
-	IFLA_GRE_UNSPEC,
-	IFLA_GRE_LINK,
-	IFLA_GRE_IFLAGS,
-	IFLA_GRE_OFLAGS,
-	IFLA_GRE_IKEY,
-	IFLA_GRE_OKEY,
-	IFLA_GRE_LOCAL,
-	IFLA_GRE_REMOTE,
-	IFLA_GRE_TTL,
-	IFLA_GRE_TOS,
-	IFLA_GRE_PMTUDISC,
-	IFLA_GRE_ENCAP_LIMIT,
-	IFLA_GRE_FLOWINFO,
-	IFLA_GRE_FLAGS,
-	__IFLA_GRE_MAX,
-};
-
-#define IFLA_GRE_MAX	(__IFLA_GRE_MAX - 1)
-
-/* VTI-mode i_flags */
-#define VTI_ISVTI 0x0001
-
-enum {
-	IFLA_VTI_UNSPEC,
-	IFLA_VTI_LINK,
-	IFLA_VTI_IKEY,
-	IFLA_VTI_OKEY,
-	IFLA_VTI_LOCAL,
-	IFLA_VTI_REMOTE,
-	__IFLA_VTI_MAX,
-};
+#include <uapi/linux/if_tunnel.h>
 
-#define IFLA_VTI_MAX	(__IFLA_VTI_MAX - 1)
 #endif /* _IF_TUNNEL_H_ */
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index c0ff748d0aa5..d06cc5c8f58c 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -9,15 +9,14 @@
  *		2 of the License, or (at your option) any later version.
  *
  */
-
 #ifndef _LINUX_IF_VLAN_H_
 #define _LINUX_IF_VLAN_H_
 
-#ifdef __KERNEL__
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/rtnetlink.h>
 #include <linux/bug.h>
+#include <uapi/linux/if_vlan.h>
 
 #define VLAN_HLEN	4		/* The additional bytes required by VLAN
 					 * (in addition to the Ethernet header)
@@ -361,52 +360,4 @@ static inline void vlan_set_encap_proto(struct sk_buff *skb,
 		 */
 		skb->protocol = htons(ETH_P_802_2);
 }
-#endif /* __KERNEL__ */
-
-/* VLAN IOCTLs are found in sockios.h */
-
-/* Passed in vlan_ioctl_args structure to determine behaviour. */
-enum vlan_ioctl_cmds {
-	ADD_VLAN_CMD,
-	DEL_VLAN_CMD,
-	SET_VLAN_INGRESS_PRIORITY_CMD,
-	SET_VLAN_EGRESS_PRIORITY_CMD,
-	GET_VLAN_INGRESS_PRIORITY_CMD,
-	GET_VLAN_EGRESS_PRIORITY_CMD,
-	SET_VLAN_NAME_TYPE_CMD,
-	SET_VLAN_FLAG_CMD,
-	GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
-	GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
-};
-
-enum vlan_flags {
-	VLAN_FLAG_REORDER_HDR	= 0x1,
-	VLAN_FLAG_GVRP		= 0x2,
-	VLAN_FLAG_LOOSE_BINDING	= 0x4,
-};
-
-enum vlan_name_types {
-	VLAN_NAME_TYPE_PLUS_VID, /* Name will look like:  vlan0005 */
-	VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like:  eth1.0005 */
-	VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like:  vlan5 */
-	VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like:  eth0.5 */
-	VLAN_NAME_TYPE_HIGHEST
-};
-
-struct vlan_ioctl_args {
-	int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
-	char device1[24];
-
-        union {
-		char device2[24];
-		int VID;
-		unsigned int skb_priority;
-		unsigned int name_type;
-		unsigned int bind_type;
-		unsigned int flag; /* Matches vlan_dev_priv flags */
-        } u;
-
-	short vlan_qos;   
-};
-
 #endif /* !(_LINUX_IF_VLAN_H_) */
diff --git a/include/linux/if_x25.h b/include/linux/if_x25.h
deleted file mode 100644
index 897765f5feb8..000000000000
--- a/include/linux/if_x25.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  Linux X.25 packet to device interface
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *  GNU General Public License for more details.
- */
-
-#ifndef _IF_X25_H
-#define _IF_X25_H
-
-#include <linux/types.h>
-
-/* Documentation/networking/x25-iface.txt */
-#define X25_IFACE_DATA		0x00
-#define X25_IFACE_CONNECT	0x01
-#define X25_IFACE_DISCONNECT	0x02
-#define X25_IFACE_PARAMS	0x03
-
-#endif /* _IF_X25_H */
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index 82de336b8155..7f2bf1518480 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -12,123 +12,13 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IGMP_H
 #define _LINUX_IGMP_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*
- *	IGMP protocol structures
- */
-
-/*
- *	Header in on cable format
- */
-
-struct igmphdr {
-	__u8 type;
-	__u8 code;		/* For newer IGMP */
-	__sum16 csum;
-	__be32 group;
-};
-
-/* V3 group record types [grec_type] */
-#define IGMPV3_MODE_IS_INCLUDE		1
-#define IGMPV3_MODE_IS_EXCLUDE		2
-#define IGMPV3_CHANGE_TO_INCLUDE	3
-#define IGMPV3_CHANGE_TO_EXCLUDE	4
-#define IGMPV3_ALLOW_NEW_SOURCES	5
-#define IGMPV3_BLOCK_OLD_SOURCES	6
-
-struct igmpv3_grec {
-	__u8	grec_type;
-	__u8	grec_auxwords;
-	__be16	grec_nsrcs;
-	__be32	grec_mca;
-	__be32	grec_src[0];
-};
-
-struct igmpv3_report {
-	__u8 type;
-	__u8 resv1;
-	__be16 csum;
-	__be16 resv2;
-	__be16 ngrec;
-	struct igmpv3_grec grec[0];
-};
-
-struct igmpv3_query {
-	__u8 type;
-	__u8 code;
-	__be16 csum;
-	__be32 group;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 qrv:3,
-	     suppress:1,
-	     resv:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8 resv:4,
-	     suppress:1,
-	     qrv:3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	__u8 qqic;
-	__be16 nsrcs;
-	__be32 srcs[0];
-};
-
-#define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
-#define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
-#define IGMP_DVMRP			0x13	/* DVMRP routing */
-#define IGMP_PIM			0x14	/* PIM routing */
-#define IGMP_TRACE			0x15
-#define IGMPV2_HOST_MEMBERSHIP_REPORT	0x16	/* V2 version of 0x12 */
-#define IGMP_HOST_LEAVE_MESSAGE 	0x17
-#define IGMPV3_HOST_MEMBERSHIP_REPORT	0x22	/* V3 version of 0x12 */
-
-#define IGMP_MTRACE_RESP		0x1e
-#define IGMP_MTRACE			0x1f
-
-
-/*
- *	Use the BSD names for these for compatibility
- */
-
-#define IGMP_DELAYING_MEMBER		0x01
-#define IGMP_IDLE_MEMBER		0x02
-#define IGMP_LAZY_MEMBER		0x03
-#define IGMP_SLEEPING_MEMBER		0x04
-#define IGMP_AWAKENING_MEMBER		0x05
-
-#define IGMP_MINLEN			8
-
-#define IGMP_MAX_HOST_REPORT_DELAY	10	/* max delay for response to */
-						/* query (in seconds)	*/
-
-#define IGMP_TIMER_SCALE		10	/* denotes that the igmphdr->timer field */
-						/* specifies time in 10th of seconds	 */
-
-#define IGMP_AGE_THRESHOLD		400	/* If this host don't hear any IGMP V1	*/
-						/* message in this period of time,	*/
-						/* revert to IGMP v2 router.		*/
-
-#define IGMP_ALL_HOSTS		htonl(0xE0000001L)
-#define IGMP_ALL_ROUTER 	htonl(0xE0000002L)
-#define IGMPV3_ALL_MCR	 	htonl(0xE0000016L)
-#define IGMP_LOCAL_GROUP	htonl(0xE0000000L)
-#define IGMP_LOCAL_GROUP_MASK	htonl(0xFFFFFF00L)
-
-/*
- * struct for keeping the multicast list in
- */
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
 #include <linux/timer.h>
 #include <linux/in.h>
+#include <uapi/linux/igmp.h>
 
 static inline struct igmphdr *igmp_hdr(const struct sk_buff *skb)
 {
@@ -241,4 +131,3 @@ extern void ip_mc_inc_group(struct in_device *in_dev, __be32 addr);
 extern void ip_mc_rejoin_groups(struct in_device *in_dev);
 
 #endif
-#endif
diff --git a/include/linux/in.h b/include/linux/in.h
index e0337f11d92e..31b493734763 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -18,240 +18,9 @@
 #ifndef _LINUX_IN_H
 #define _LINUX_IN_H
 
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Standard well-defined IP protocols.  */
-enum {
-  IPPROTO_IP = 0,		/* Dummy protocol for TCP		*/
-  IPPROTO_ICMP = 1,		/* Internet Control Message Protocol	*/
-  IPPROTO_IGMP = 2,		/* Internet Group Management Protocol	*/
-  IPPROTO_IPIP = 4,		/* IPIP tunnels (older KA9Q tunnels use 94) */
-  IPPROTO_TCP = 6,		/* Transmission Control Protocol	*/
-  IPPROTO_EGP = 8,		/* Exterior Gateway Protocol		*/
-  IPPROTO_PUP = 12,		/* PUP protocol				*/
-  IPPROTO_UDP = 17,		/* User Datagram Protocol		*/
-  IPPROTO_IDP = 22,		/* XNS IDP protocol			*/
-  IPPROTO_DCCP = 33,		/* Datagram Congestion Control Protocol */
-  IPPROTO_RSVP = 46,		/* RSVP protocol			*/
-  IPPROTO_GRE = 47,		/* Cisco GRE tunnels (rfc 1701,1702)	*/
-
-  IPPROTO_IPV6	 = 41,		/* IPv6-in-IPv4 tunnelling		*/
-
-  IPPROTO_ESP = 50,            /* Encapsulation Security Payload protocol */
-  IPPROTO_AH = 51,             /* Authentication Header protocol       */
-  IPPROTO_BEETPH = 94,	       /* IP option pseudo header for BEET */
-  IPPROTO_PIM    = 103,		/* Protocol Independent Multicast	*/
-
-  IPPROTO_COMP   = 108,                /* Compression Header protocol */
-  IPPROTO_SCTP   = 132,		/* Stream Control Transport Protocol	*/
-  IPPROTO_UDPLITE = 136,	/* UDP-Lite (RFC 3828)			*/
-
-  IPPROTO_RAW	 = 255,		/* Raw IP packets			*/
-  IPPROTO_MAX
-};
-
-
-/* Internet address. */
-struct in_addr {
-	__be32	s_addr;
-};
-
-#define IP_TOS		1
-#define IP_TTL		2
-#define IP_HDRINCL	3
-#define IP_OPTIONS	4
-#define IP_ROUTER_ALERT	5
-#define IP_RECVOPTS	6
-#define IP_RETOPTS	7
-#define IP_PKTINFO	8
-#define IP_PKTOPTIONS	9
-#define IP_MTU_DISCOVER	10
-#define IP_RECVERR	11
-#define IP_RECVTTL	12
-#define	IP_RECVTOS	13
-#define IP_MTU		14
-#define IP_FREEBIND	15
-#define IP_IPSEC_POLICY	16
-#define IP_XFRM_POLICY	17
-#define IP_PASSSEC	18
-#define IP_TRANSPARENT	19
-
-/* BSD compatibility */
-#define IP_RECVRETOPTS	IP_RETOPTS
-
-/* TProxy original addresses */
-#define IP_ORIGDSTADDR       20
-#define IP_RECVORIGDSTADDR   IP_ORIGDSTADDR
-
-#define IP_MINTTL       21
-#define IP_NODEFRAG     22
-
-/* IP_MTU_DISCOVER values */
-#define IP_PMTUDISC_DONT		0	/* Never send DF frames */
-#define IP_PMTUDISC_WANT		1	/* Use per route hints	*/
-#define IP_PMTUDISC_DO			2	/* Always DF		*/
-#define IP_PMTUDISC_PROBE		3       /* Ignore dst pmtu      */
-
-#define IP_MULTICAST_IF			32
-#define IP_MULTICAST_TTL 		33
-#define IP_MULTICAST_LOOP 		34
-#define IP_ADD_MEMBERSHIP		35
-#define IP_DROP_MEMBERSHIP		36
-#define IP_UNBLOCK_SOURCE		37
-#define IP_BLOCK_SOURCE			38
-#define IP_ADD_SOURCE_MEMBERSHIP	39
-#define IP_DROP_SOURCE_MEMBERSHIP	40
-#define IP_MSFILTER			41
-#define MCAST_JOIN_GROUP		42
-#define MCAST_BLOCK_SOURCE		43
-#define MCAST_UNBLOCK_SOURCE		44
-#define MCAST_LEAVE_GROUP		45
-#define MCAST_JOIN_SOURCE_GROUP		46
-#define MCAST_LEAVE_SOURCE_GROUP	47
-#define MCAST_MSFILTER			48
-#define IP_MULTICAST_ALL		49
-#define IP_UNICAST_IF			50
-
-#define MCAST_EXCLUDE	0
-#define MCAST_INCLUDE	1
-
-/* These need to appear somewhere around here */
-#define IP_DEFAULT_MULTICAST_TTL        1
-#define IP_DEFAULT_MULTICAST_LOOP       1
-
-/* Request struct for multicast socket ops */
-
-struct ip_mreq  {
-	struct in_addr imr_multiaddr;	/* IP multicast address of group */
-	struct in_addr imr_interface;	/* local IP address of interface */
-};
-
-struct ip_mreqn {
-	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
-	struct in_addr	imr_address;		/* local IP address of interface */
-	int		imr_ifindex;		/* Interface index */
-};
-
-struct ip_mreq_source {
-	__be32		imr_multiaddr;
-	__be32		imr_interface;
-	__be32		imr_sourceaddr;
-};
-
-struct ip_msfilter {
-	__be32		imsf_multiaddr;
-	__be32		imsf_interface;
-	__u32		imsf_fmode;
-	__u32		imsf_numsrc;
-	__be32		imsf_slist[1];
-};
-
-#define IP_MSFILTER_SIZE(numsrc) \
-	(sizeof(struct ip_msfilter) - sizeof(__u32) \
-	+ (numsrc) * sizeof(__u32))
-
-struct group_req {
-	__u32				 gr_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gr_group;	/* group address */
-};
-
-struct group_source_req {
-	__u32				 gsr_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gsr_group;	/* group address */
-	struct __kernel_sockaddr_storage gsr_source;	/* source address */
-};
-
-struct group_filter {
-	__u32				 gf_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
-	__u32				 gf_fmode;	/* filter mode */
-	__u32				 gf_numsrc;	/* number of sources */
-	struct __kernel_sockaddr_storage gf_slist[1];	/* interface index */
-};
-
-#define GROUP_FILTER_SIZE(numsrc) \
-	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
-	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
-
-struct in_pktinfo {
-	int		ipi_ifindex;
-	struct in_addr	ipi_spec_dst;
-	struct in_addr	ipi_addr;
-};
-
-/* Structure describing an Internet (IP) socket address. */
-#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
-struct sockaddr_in {
-  __kernel_sa_family_t	sin_family;	/* Address family		*/
-  __be16		sin_port;	/* Port number			*/
-  struct in_addr	sin_addr;	/* Internet address		*/
-
-  /* Pad to size of `struct sockaddr'. */
-  unsigned char		__pad[__SOCK_SIZE__ - sizeof(short int) -
-			sizeof(unsigned short int) - sizeof(struct in_addr)];
-};
-#define sin_zero	__pad		/* for BSD UNIX comp. -FvK	*/
-
-
-/*
- * Definitions of the bits in an Internet address integer.
- * On subnets, host and network parts are found according
- * to the subnet mask, not these masks.
- */
-#define	IN_CLASSA(a)		((((long int) (a)) & 0x80000000) == 0)
-#define	IN_CLASSA_NET		0xff000000
-#define	IN_CLASSA_NSHIFT	24
-#define	IN_CLASSA_HOST		(0xffffffff & ~IN_CLASSA_NET)
-#define	IN_CLASSA_MAX		128
-
-#define	IN_CLASSB(a)		((((long int) (a)) & 0xc0000000) == 0x80000000)
-#define	IN_CLASSB_NET		0xffff0000
-#define	IN_CLASSB_NSHIFT	16
-#define	IN_CLASSB_HOST		(0xffffffff & ~IN_CLASSB_NET)
-#define	IN_CLASSB_MAX		65536
-
-#define	IN_CLASSC(a)		((((long int) (a)) & 0xe0000000) == 0xc0000000)
-#define	IN_CLASSC_NET		0xffffff00
-#define	IN_CLASSC_NSHIFT	8
-#define	IN_CLASSC_HOST		(0xffffffff & ~IN_CLASSC_NET)
-
-#define	IN_CLASSD(a)		((((long int) (a)) & 0xf0000000) == 0xe0000000)
-#define	IN_MULTICAST(a)		IN_CLASSD(a)
-#define IN_MULTICAST_NET	0xF0000000
-
-#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
-#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
-
-/* Address to accept any incoming messages. */
-#define	INADDR_ANY		((unsigned long int) 0x00000000)
-
-/* Address to send to all hosts. */
-#define	INADDR_BROADCAST	((unsigned long int) 0xffffffff)
-
-/* Address indicating an error return. */
-#define	INADDR_NONE		((unsigned long int) 0xffffffff)
-
-/* Network number for local host loopback. */
-#define	IN_LOOPBACKNET		127
-
-/* Address to loopback in software to local host.  */
-#define	INADDR_LOOPBACK		0x7f000001	/* 127.0.0.1   */
-#define	IN_LOOPBACK(a)		((((long int) (a)) & 0xff000000) == 0x7f000000)
-
-/* Defines for Multicast INADDR */
-#define INADDR_UNSPEC_GROUP   	0xe0000000U	/* 224.0.0.0   */
-#define INADDR_ALLHOSTS_GROUP 	0xe0000001U	/* 224.0.0.1   */
-#define INADDR_ALLRTRS_GROUP    0xe0000002U	/* 224.0.0.2 */
-#define INADDR_MAX_LOCAL_GROUP  0xe00000ffU	/* 224.0.0.255 */
-
-
-/* <asm/byteorder.h> contains the htonl type stuff.. */
-#include <asm/byteorder.h> 
-
-#ifdef __KERNEL__
 
 #include <linux/errno.h>
+#include <uapi/linux/in.h>
 
 static inline int proto_ports_offset(int proto)
 {
@@ -332,6 +101,4 @@ static inline bool ipv4_is_test_198(__be32 addr)
 {
 	return (addr & htonl(0xfffe0000)) == htonl(0xc6120000);
 }
-#endif
-
 #endif	/* _LINUX_IN_H */
diff --git a/include/linux/in6.h b/include/linux/in6.h
index cba469ba11a4..9e2ae26fb598 100644
--- a/include/linux/in6.h
+++ b/include/linux/in6.h
@@ -17,32 +17,11 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IN6_H
 #define _LINUX_IN6_H
 
-#include <linux/types.h>
-
-/*
- *	IPv6 address structure
- */
-
-struct in6_addr {
-	union {
-		__u8		u6_addr8[16];
-		__be16		u6_addr16[8];
-		__be32		u6_addr32[4];
-	} in6_u;
-#define s6_addr			in6_u.u6_addr8
-#define s6_addr16		in6_u.u6_addr16
-#define s6_addr32		in6_u.u6_addr32
-};
+#include <uapi/linux/in6.h>
 
-/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
- * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
- * in network byte order, not in host byte order as are the IPv4 equivalents
- */
-#ifdef __KERNEL__
 extern const struct in6_addr in6addr_any;
 #define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } }
 extern const struct in6_addr in6addr_loopback;
@@ -54,238 +33,3 @@ extern const struct in6_addr in6addr_linklocal_allrouters;
 #define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \
 		{ { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } }
 #endif
-
-struct sockaddr_in6 {
-	unsigned short int	sin6_family;    /* AF_INET6 */
-	__be16			sin6_port;      /* Transport layer port # */
-	__be32			sin6_flowinfo;  /* IPv6 flow information */
-	struct in6_addr		sin6_addr;      /* IPv6 address */
-	__u32			sin6_scope_id;  /* scope id (new in RFC2553) */
-};
-
-struct ipv6_mreq {
-	/* IPv6 multicast address of group */
-	struct in6_addr ipv6mr_multiaddr;
-
-	/* local IPv6 address of interface */
-	int		ipv6mr_ifindex;
-};
-
-#define ipv6mr_acaddr	ipv6mr_multiaddr
-
-struct in6_flowlabel_req {
-	struct in6_addr	flr_dst;
-	__be32	flr_label;
-	__u8	flr_action;
-	__u8	flr_share;
-	__u16	flr_flags;
-	__u16 	flr_expires;
-	__u16	flr_linger;
-	__u32	__flr_pad;
-	/* Options in format of IPV6_PKTOPTIONS */
-};
-
-#define IPV6_FL_A_GET	0
-#define IPV6_FL_A_PUT	1
-#define IPV6_FL_A_RENEW	2
-
-#define IPV6_FL_F_CREATE	1
-#define IPV6_FL_F_EXCL		2
-
-#define IPV6_FL_S_NONE		0
-#define IPV6_FL_S_EXCL		1
-#define IPV6_FL_S_PROCESS	2
-#define IPV6_FL_S_USER		3
-#define IPV6_FL_S_ANY		255
-
-
-/*
- *	Bitmask constant declarations to help applications select out the 
- *	flow label and priority fields.
- *
- *	Note that this are in host byte order while the flowinfo field of
- *	sockaddr_in6 is in network byte order.
- */
-
-#define IPV6_FLOWINFO_FLOWLABEL		0x000fffff
-#define IPV6_FLOWINFO_PRIORITY		0x0ff00000
-
-/* These definitions are obsolete */
-#define IPV6_PRIORITY_UNCHARACTERIZED	0x0000
-#define IPV6_PRIORITY_FILLER		0x0100
-#define IPV6_PRIORITY_UNATTENDED	0x0200
-#define IPV6_PRIORITY_RESERVED1		0x0300
-#define IPV6_PRIORITY_BULK		0x0400
-#define IPV6_PRIORITY_RESERVED2		0x0500
-#define IPV6_PRIORITY_INTERACTIVE	0x0600
-#define IPV6_PRIORITY_CONTROL		0x0700
-#define IPV6_PRIORITY_8			0x0800
-#define IPV6_PRIORITY_9			0x0900
-#define IPV6_PRIORITY_10		0x0a00
-#define IPV6_PRIORITY_11		0x0b00
-#define IPV6_PRIORITY_12		0x0c00
-#define IPV6_PRIORITY_13		0x0d00
-#define IPV6_PRIORITY_14		0x0e00
-#define IPV6_PRIORITY_15		0x0f00
-
-/*
- *	IPV6 extension headers
- */
-#define IPPROTO_HOPOPTS		0	/* IPv6 hop-by-hop options	*/
-#define IPPROTO_ROUTING		43	/* IPv6 routing header		*/
-#define IPPROTO_FRAGMENT	44	/* IPv6 fragmentation header	*/
-#define IPPROTO_ICMPV6		58	/* ICMPv6			*/
-#define IPPROTO_NONE		59	/* IPv6 no next header		*/
-#define IPPROTO_DSTOPTS		60	/* IPv6 destination options	*/
-#define IPPROTO_MH		135	/* IPv6 mobility header		*/
-
-/*
- *	IPv6 TLV options.
- */
-#define IPV6_TLV_PAD1		0
-#define IPV6_TLV_PADN		1
-#define IPV6_TLV_ROUTERALERT	5
-#define IPV6_TLV_JUMBO		194
-#define IPV6_TLV_HAO		201	/* home address option */
-
-/*
- *	IPV6 socket options
- */
-
-#define IPV6_ADDRFORM		1
-#define IPV6_2292PKTINFO	2
-#define IPV6_2292HOPOPTS	3
-#define IPV6_2292DSTOPTS	4
-#define IPV6_2292RTHDR		5
-#define IPV6_2292PKTOPTIONS	6
-#define IPV6_CHECKSUM		7
-#define IPV6_2292HOPLIMIT	8
-#define IPV6_NEXTHOP		9
-#define IPV6_AUTHHDR		10	/* obsolete */
-#define IPV6_FLOWINFO		11
-
-#define IPV6_UNICAST_HOPS	16
-#define IPV6_MULTICAST_IF	17
-#define IPV6_MULTICAST_HOPS	18
-#define IPV6_MULTICAST_LOOP	19
-#define IPV6_ADD_MEMBERSHIP	20
-#define IPV6_DROP_MEMBERSHIP	21
-#define IPV6_ROUTER_ALERT	22
-#define IPV6_MTU_DISCOVER	23
-#define IPV6_MTU		24
-#define IPV6_RECVERR		25
-#define IPV6_V6ONLY		26
-#define IPV6_JOIN_ANYCAST	27
-#define IPV6_LEAVE_ANYCAST	28
-
-/* IPV6_MTU_DISCOVER values */
-#define IPV6_PMTUDISC_DONT		0
-#define IPV6_PMTUDISC_WANT		1
-#define IPV6_PMTUDISC_DO		2
-#define IPV6_PMTUDISC_PROBE		3
-
-/* Flowlabel */
-#define IPV6_FLOWLABEL_MGR	32
-#define IPV6_FLOWINFO_SEND	33
-
-#define IPV6_IPSEC_POLICY	34
-#define IPV6_XFRM_POLICY	35
-
-/*
- * Multicast:
- * Following socket options are shared between IPv4 and IPv6.
- *
- * MCAST_JOIN_GROUP		42
- * MCAST_BLOCK_SOURCE		43
- * MCAST_UNBLOCK_SOURCE		44
- * MCAST_LEAVE_GROUP		45
- * MCAST_JOIN_SOURCE_GROUP	46
- * MCAST_LEAVE_SOURCE_GROUP	47
- * MCAST_MSFILTER		48
- */
-
-/*
- * Advanced API (RFC3542) (1)
- *
- * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c.
- */
-
-#define IPV6_RECVPKTINFO	49
-#define IPV6_PKTINFO		50
-#define IPV6_RECVHOPLIMIT	51
-#define IPV6_HOPLIMIT		52
-#define IPV6_RECVHOPOPTS	53
-#define IPV6_HOPOPTS		54
-#define IPV6_RTHDRDSTOPTS	55
-#define IPV6_RECVRTHDR		56
-#define IPV6_RTHDR		57
-#define IPV6_RECVDSTOPTS	58
-#define IPV6_DSTOPTS		59
-#define IPV6_RECVPATHMTU	60
-#define IPV6_PATHMTU		61
-#define IPV6_DONTFRAG		62
-#if 0	/* not yet */
-#define IPV6_USE_MIN_MTU	63
-#endif
-
-/*
- * Netfilter (1)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO		64
- * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES	65
- */
-
-/*
- * Advanced API (RFC3542) (2)
- */
-#define IPV6_RECVTCLASS		66
-#define IPV6_TCLASS		67
-
-/*
- * Netfilter (2)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_GET_REVISION_MATCH	68
- * IP6T_SO_GET_REVISION_TARGET	69
- */
-
-/* RFC5014: Source address selection */
-#define IPV6_ADDR_PREFERENCES	72
-
-#define IPV6_PREFER_SRC_TMP		0x0001
-#define IPV6_PREFER_SRC_PUBLIC		0x0002
-#define IPV6_PREFER_SRC_PUBTMP_DEFAULT	0x0100
-#define IPV6_PREFER_SRC_COA		0x0004
-#define IPV6_PREFER_SRC_HOME		0x0400
-#define IPV6_PREFER_SRC_CGA		0x0008
-#define IPV6_PREFER_SRC_NONCGA		0x0800
-
-/* RFC5082: Generalized Ttl Security Mechanism */
-#define IPV6_MINHOPCOUNT		73
-
-#define IPV6_ORIGDSTADDR        74
-#define IPV6_RECVORIGDSTADDR    IPV6_ORIGDSTADDR
-#define IPV6_TRANSPARENT        75
-#define IPV6_UNICAST_IF         76
-
-/*
- * Multicast Routing:
- * see include/linux/mroute6.h.
- *
- * MRT6_INIT			200
- * MRT6_DONE			201
- * MRT6_ADD_MIF			202
- * MRT6_DEL_MIF			203
- * MRT6_ADD_MFC			204
- * MRT6_DEL_MFC			205
- * MRT6_VERSION			206
- * MRT6_ASSERT			207
- * MRT6_PIM			208
- * (reserved)			209
- */
-#endif
diff --git a/include/linux/in_route.h b/include/linux/in_route.h
deleted file mode 100644
index b261b8c915f0..000000000000
--- a/include/linux/in_route.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _LINUX_IN_ROUTE_H
-#define _LINUX_IN_ROUTE_H
-
-/* IPv4 routing cache flags */
-
-#define RTCF_DEAD	RTNH_F_DEAD
-#define RTCF_ONLINK	RTNH_F_ONLINK
-
-/* Obsolete flag. About to be deleted */
-#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC
-
-#define RTCF_NOTIFY	0x00010000
-#define RTCF_DIRECTDST	0x00020000 /* unused */
-#define RTCF_REDIRECTED	0x00040000
-#define RTCF_TPROXY	0x00080000 /* unused */
-
-#define RTCF_FAST	0x00200000 /* unused */
-#define RTCF_MASQ	0x00400000 /* unused */
-#define RTCF_SNAT	0x00800000 /* unused */
-#define RTCF_DOREDIRECT 0x01000000
-#define RTCF_DIRECTSRC	0x04000000
-#define RTCF_DNAT	0x08000000
-#define RTCF_BROADCAST	0x10000000
-#define RTCF_MULTICAST	0x20000000
-#define RTCF_REJECT	0x40000000 /* unused */
-#define RTCF_LOCAL	0x80000000
-
-#define RTCF_NAT	(RTCF_DNAT|RTCF_SNAT)
-
-#define RT_TOS(tos)	((tos)&IPTOS_TOS_MASK)
-
-#endif /* _LINUX_IN_ROUTE_H */
diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h
index e788c186ed3a..46da02410a09 100644
--- a/include/linux/inet_diag.h
+++ b/include/linux/inet_diag.h
@@ -1,138 +1,8 @@
 #ifndef _INET_DIAG_H_
 #define _INET_DIAG_H_ 1
 
-#include <linux/types.h>
+#include <uapi/linux/inet_diag.h>
 
-/* Just some random number */
-#define TCPDIAG_GETSOCK 18
-#define DCCPDIAG_GETSOCK 19
-
-#define INET_DIAG_GETSOCK_MAX 24
-
-/* Socket identity */
-struct inet_diag_sockid {
-	__be16	idiag_sport;
-	__be16	idiag_dport;
-	__be32	idiag_src[4];
-	__be32	idiag_dst[4];
-	__u32	idiag_if;
-	__u32	idiag_cookie[2];
-#define INET_DIAG_NOCOOKIE (~0U)
-};
-
-/* Request structure */
-
-struct inet_diag_req {
-	__u8	idiag_family;		/* Family of addresses. */
-	__u8	idiag_src_len;
-	__u8	idiag_dst_len;
-	__u8	idiag_ext;		/* Query extended information */
-
-	struct inet_diag_sockid id;
-
-	__u32	idiag_states;		/* States to dump */
-	__u32	idiag_dbs;		/* Tables to dump (NI) */
-};
-
-struct inet_diag_req_v2 {
-	__u8	sdiag_family;
-	__u8	sdiag_protocol;
-	__u8	idiag_ext;
-	__u8	pad;
-	__u32	idiag_states;
-	struct inet_diag_sockid id;
-};
-
-enum {
-	INET_DIAG_REQ_NONE,
-	INET_DIAG_REQ_BYTECODE,
-};
-
-#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE
-
-/* Bytecode is sequence of 4 byte commands followed by variable arguments.
- * All the commands identified by "code" are conditional jumps forward:
- * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
- * length of the command and its arguments.
- */
- 
-struct inet_diag_bc_op {
-	unsigned char	code;
-	unsigned char	yes;
-	unsigned short	no;
-};
-
-enum {
-	INET_DIAG_BC_NOP,
-	INET_DIAG_BC_JMP,
-	INET_DIAG_BC_S_GE,
-	INET_DIAG_BC_S_LE,
-	INET_DIAG_BC_D_GE,
-	INET_DIAG_BC_D_LE,
-	INET_DIAG_BC_AUTO,
-	INET_DIAG_BC_S_COND,
-	INET_DIAG_BC_D_COND,
-};
-
-struct inet_diag_hostcond {
-	__u8	family;
-	__u8	prefix_len;
-	int	port;
-	__be32	addr[0];
-};
-
-/* Base info structure. It contains socket identity (addrs/ports/cookie)
- * and, alas, the information shown by netstat. */
-struct inet_diag_msg {
-	__u8	idiag_family;
-	__u8	idiag_state;
-	__u8	idiag_timer;
-	__u8	idiag_retrans;
-
-	struct inet_diag_sockid id;
-
-	__u32	idiag_expires;
-	__u32	idiag_rqueue;
-	__u32	idiag_wqueue;
-	__u32	idiag_uid;
-	__u32	idiag_inode;
-};
-
-/* Extensions */
-
-enum {
-	INET_DIAG_NONE,
-	INET_DIAG_MEMINFO,
-	INET_DIAG_INFO,
-	INET_DIAG_VEGASINFO,
-	INET_DIAG_CONG,
-	INET_DIAG_TOS,
-	INET_DIAG_TCLASS,
-	INET_DIAG_SKMEMINFO,
-};
-
-#define INET_DIAG_MAX INET_DIAG_SKMEMINFO
-
-
-/* INET_DIAG_MEM */
-
-struct inet_diag_meminfo {
-	__u32	idiag_rmem;
-	__u32	idiag_wmem;
-	__u32	idiag_fmem;
-	__u32	idiag_tmem;
-};
-
-/* INET_DIAG_VEGASINFO */
-
-struct tcpvegas_info {
-	__u32	tcpv_enabled;
-	__u32	tcpv_rttcnt;
-	__u32	tcpv_rtt;
-	__u32	tcpv_minrtt;
-};
-
-#ifdef __KERNEL__
 struct sock;
 struct inet_hashinfo;
 struct nlattr;
@@ -173,6 +43,4 @@ int inet_diag_bc_sk(const struct nlattr *_bc, struct sock *sk);
 
 extern int  inet_diag_register(const struct inet_diag_handler *handler);
 extern void inet_diag_unregister(const struct inet_diag_handler *handler);
-#endif /* __KERNEL__ */
-
 #endif /* _INET_DIAG_H_ */
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index d33041e2a42a..23aede0b5843 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -3,75 +3,12 @@
  *
  * Copyright (C) 2005 John McCutchan
  */
-
 #ifndef _LINUX_INOTIFY_H
 #define _LINUX_INOTIFY_H
 
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
-#include <linux/types.h>
-
-/*
- * struct inotify_event - structure read from the inotify device for each event
- *
- * When you are watching a directory, you will receive the filename for events
- * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd.
- */
-struct inotify_event {
-	__s32		wd;		/* watch descriptor */
-	__u32		mask;		/* watch mask */
-	__u32		cookie;		/* cookie to synchronize two events */
-	__u32		len;		/* length (including nulls) of name */
-	char		name[0];	/* stub for possible name */
-};
-
-/* the following are legal, implemented events that user-space can watch for */
-#define IN_ACCESS		0x00000001	/* File was accessed */
-#define IN_MODIFY		0x00000002	/* File was modified */
-#define IN_ATTRIB		0x00000004	/* Metadata changed */
-#define IN_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
-#define IN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
-#define IN_OPEN			0x00000020	/* File was opened */
-#define IN_MOVED_FROM		0x00000040	/* File was moved from X */
-#define IN_MOVED_TO		0x00000080	/* File was moved to Y */
-#define IN_CREATE		0x00000100	/* Subfile was created */
-#define IN_DELETE		0x00000200	/* Subfile was deleted */
-#define IN_DELETE_SELF		0x00000400	/* Self was deleted */
-#define IN_MOVE_SELF		0x00000800	/* Self was moved */
-
-/* the following are legal events.  they are sent as needed to any watch */
-#define IN_UNMOUNT		0x00002000	/* Backing fs was unmounted */
-#define IN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
-#define IN_IGNORED		0x00008000	/* File was ignored */
-
-/* helper events */
-#define IN_CLOSE		(IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */
-#define IN_MOVE			(IN_MOVED_FROM | IN_MOVED_TO) /* moves */
-
-/* special flags */
-#define IN_ONLYDIR		0x01000000	/* only watch the path if it is a directory */
-#define IN_DONT_FOLLOW		0x02000000	/* don't follow a sym link */
-#define IN_EXCL_UNLINK		0x04000000	/* exclude events on unlinked objects */
-#define IN_MASK_ADD		0x20000000	/* add to the mask of an already existing watch */
-#define IN_ISDIR		0x40000000	/* event occurred against dir */
-#define IN_ONESHOT		0x80000000	/* only send event once */
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility.  Apps will get only the
- * events that they originally wanted.  Be sure to add new events here!
- */
-#define IN_ALL_EVENTS	(IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
-			 IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
-			 IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
-			 IN_MOVE_SELF)
-
-/* Flags for sys_inotify_init1.  */
-#define IN_CLOEXEC O_CLOEXEC
-#define IN_NONBLOCK O_NONBLOCK
-
-#ifdef __KERNEL__
 #include <linux/sysctl.h>
+#include <uapi/linux/inotify.h>
+
 extern struct ctl_table inotify_table[]; /* for sysctl */
 
 #define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
@@ -82,6 +19,4 @@ extern struct ctl_table inotify_table[]; /* for sysctl */
 			  IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \
 			  IN_ISDIR | IN_ONESHOT)
 
-#endif
-
 #endif	/* _LINUX_INOTIFY_H */
diff --git a/include/linux/input.h b/include/linux/input.h
index 15464ba6bf53..cab994ba6d91 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -1,6 +1,3 @@
-#ifndef _INPUT_H
-#define _INPUT_H
-
 /*
  * Copyright (c) 1999-2002 Vojtech Pavlik
  *
@@ -8,1156 +5,15 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
+#ifndef _INPUT_H
+#define _INPUT_H
 
-#ifdef __KERNEL__
 #include <linux/time.h>
 #include <linux/list.h>
-#else
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <linux/types.h>
-#endif
-
-/*
- * The event structure itself
- */
-
-struct input_event {
-	struct timeval time;
-	__u16 type;
-	__u16 code;
-	__s32 value;
-};
-
-/*
- * Protocol version.
- */
-
-#define EV_VERSION		0x010001
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-struct input_id {
-	__u16 bustype;
-	__u16 vendor;
-	__u16 product;
-	__u16 version;
-};
-
-/**
- * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
- * @value: latest reported value for the axis.
- * @minimum: specifies minimum value for the axis.
- * @maximum: specifies maximum value for the axis.
- * @fuzz: specifies fuzz value that is used to filter noise from
- *	the event stream.
- * @flat: values that are within this value will be discarded by
- *	joydev interface and reported as 0 instead.
- * @resolution: specifies resolution for the values reported for
- *	the axis.
- *
- * Note that input core does not clamp reported values to the
- * [minimum, maximum] limits, such task is left to userspace.
- *
- * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
- * units per millimeter (units/mm), resolution for rotational axes
- * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
- */
-struct input_absinfo {
-	__s32 value;
-	__s32 minimum;
-	__s32 maximum;
-	__s32 fuzz;
-	__s32 flat;
-	__s32 resolution;
-};
-
-/**
- * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
- * @scancode: scancode represented in machine-endian form.
- * @len: length of the scancode that resides in @scancode buffer.
- * @index: index in the keymap, may be used instead of scancode
- * @flags: allows to specify how kernel should handle the request. For
- *	example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
- *	should perform lookup in keymap by @index instead of @scancode
- * @keycode: key code assigned to this scancode
- *
- * The structure is used to retrieve and modify keymap data. Users have
- * option of performing lookup either by @scancode itself or by @index
- * in keymap entry. EVIOCGKEYCODE will also return scancode or index
- * (depending on which element was used to perform lookup).
- */
-struct input_keymap_entry {
-#define INPUT_KEYMAP_BY_INDEX	(1 << 0)
-	__u8  flags;
-	__u8  len;
-	__u16 index;
-	__u32 keycode;
-	__u8  scancode[32];
-};
-
-#define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
-#define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
-#define EVIOCGREP		_IOR('E', 0x03, unsigned int[2])	/* get repeat settings */
-#define EVIOCSREP		_IOW('E', 0x03, unsigned int[2])	/* set repeat settings */
-
-#define EVIOCGKEYCODE		_IOR('E', 0x04, unsigned int[2])        /* get keycode */
-#define EVIOCGKEYCODE_V2	_IOR('E', 0x04, struct input_keymap_entry)
-#define EVIOCSKEYCODE		_IOW('E', 0x04, unsigned int[2])        /* set keycode */
-#define EVIOCSKEYCODE_V2	_IOW('E', 0x04, struct input_keymap_entry)
-
-#define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
-#define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
-#define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
-#define EVIOCGPROP(len)		_IOC(_IOC_READ, 'E', 0x09, len)		/* get device properties */
-
-/**
- * EVIOCGMTSLOTS(len) - get MT slot values
- * @len: size of the data buffer in bytes
- *
- * The ioctl buffer argument should be binary equivalent to
- *
- * struct input_mt_request_layout {
- *	__u32 code;
- *	__s32 values[num_slots];
- * };
- *
- * where num_slots is the (arbitrary) number of MT slots to extract.
- *
- * The ioctl size argument (len) is the size of the buffer, which
- * should satisfy len = (num_slots + 1) * sizeof(__s32).  If len is
- * too small to fit all available slots, the first num_slots are
- * returned.
- *
- * Before the call, code is set to the wanted ABS_MT event type. On
- * return, values[] is filled with the slot values for the specified
- * ABS_MT code.
- *
- * If the request code is not an ABS_MT value, -EINVAL is returned.
- */
-#define EVIOCGMTSLOTS(len)	_IOC(_IOC_READ, 'E', 0x0a, len)
-
-#define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global key state */
-#define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
-#define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
-#define EVIOCGSW(len)		_IOC(_IOC_READ, 'E', 0x1b, len)		/* get all switch states */
-
-#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + (ev), len)	/* get event bits */
-#define EVIOCGABS(abs)		_IOR('E', 0x40 + (abs), struct input_absinfo)	/* get abs value/limits */
-#define EVIOCSABS(abs)		_IOW('E', 0xc0 + (abs), struct input_absinfo)	/* set abs value/limits */
-
-#define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
-#define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
-#define EVIOCGEFFECTS		_IOR('E', 0x84, int)			/* Report number of effects playable at the same time */
-
-#define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
-
-#define EVIOCSCLOCKID		_IOW('E', 0xa0, int)			/* Set clockid to be used for timestamps */
-
-/*
- * Device properties and quirks
- */
-
-#define INPUT_PROP_POINTER		0x00	/* needs a pointer */
-#define INPUT_PROP_DIRECT		0x01	/* direct input devices */
-#define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
-#define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
-
-#define INPUT_PROP_MAX			0x1f
-#define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
-
-/*
- * Event types
- */
-
-#define EV_SYN			0x00
-#define EV_KEY			0x01
-#define EV_REL			0x02
-#define EV_ABS			0x03
-#define EV_MSC			0x04
-#define EV_SW			0x05
-#define EV_LED			0x11
-#define EV_SND			0x12
-#define EV_REP			0x14
-#define EV_FF			0x15
-#define EV_PWR			0x16
-#define EV_FF_STATUS		0x17
-#define EV_MAX			0x1f
-#define EV_CNT			(EV_MAX+1)
-
-/*
- * Synchronization events.
- */
-
-#define SYN_REPORT		0
-#define SYN_CONFIG		1
-#define SYN_MT_REPORT		2
-#define SYN_DROPPED		3
-
-/*
- * Keys and buttons
- *
- * Most of the keys/buttons are modeled after USB HUT 1.12
- * (see http://www.usb.org/developers/hidpage).
- * Abbreviations in the comments:
- * AC - Application Control
- * AL - Application Launch Button
- * SC - System Control
- */
-
-#define KEY_RESERVED		0
-#define KEY_ESC			1
-#define KEY_1			2
-#define KEY_2			3
-#define KEY_3			4
-#define KEY_4			5
-#define KEY_5			6
-#define KEY_6			7
-#define KEY_7			8
-#define KEY_8			9
-#define KEY_9			10
-#define KEY_0			11
-#define KEY_MINUS		12
-#define KEY_EQUAL		13
-#define KEY_BACKSPACE		14
-#define KEY_TAB			15
-#define KEY_Q			16
-#define KEY_W			17
-#define KEY_E			18
-#define KEY_R			19
-#define KEY_T			20
-#define KEY_Y			21
-#define KEY_U			22
-#define KEY_I			23
-#define KEY_O			24
-#define KEY_P			25
-#define KEY_LEFTBRACE		26
-#define KEY_RIGHTBRACE		27
-#define KEY_ENTER		28
-#define KEY_LEFTCTRL		29
-#define KEY_A			30
-#define KEY_S			31
-#define KEY_D			32
-#define KEY_F			33
-#define KEY_G			34
-#define KEY_H			35
-#define KEY_J			36
-#define KEY_K			37
-#define KEY_L			38
-#define KEY_SEMICOLON		39
-#define KEY_APOSTROPHE		40
-#define KEY_GRAVE		41
-#define KEY_LEFTSHIFT		42
-#define KEY_BACKSLASH		43
-#define KEY_Z			44
-#define KEY_X			45
-#define KEY_C			46
-#define KEY_V			47
-#define KEY_B			48
-#define KEY_N			49
-#define KEY_M			50
-#define KEY_COMMA		51
-#define KEY_DOT			52
-#define KEY_SLASH		53
-#define KEY_RIGHTSHIFT		54
-#define KEY_KPASTERISK		55
-#define KEY_LEFTALT		56
-#define KEY_SPACE		57
-#define KEY_CAPSLOCK		58
-#define KEY_F1			59
-#define KEY_F2			60
-#define KEY_F3			61
-#define KEY_F4			62
-#define KEY_F5			63
-#define KEY_F6			64
-#define KEY_F7			65
-#define KEY_F8			66
-#define KEY_F9			67
-#define KEY_F10			68
-#define KEY_NUMLOCK		69
-#define KEY_SCROLLLOCK		70
-#define KEY_KP7			71
-#define KEY_KP8			72
-#define KEY_KP9			73
-#define KEY_KPMINUS		74
-#define KEY_KP4			75
-#define KEY_KP5			76
-#define KEY_KP6			77
-#define KEY_KPPLUS		78
-#define KEY_KP1			79
-#define KEY_KP2			80
-#define KEY_KP3			81
-#define KEY_KP0			82
-#define KEY_KPDOT		83
-
-#define KEY_ZENKAKUHANKAKU	85
-#define KEY_102ND		86
-#define KEY_F11			87
-#define KEY_F12			88
-#define KEY_RO			89
-#define KEY_KATAKANA		90
-#define KEY_HIRAGANA		91
-#define KEY_HENKAN		92
-#define KEY_KATAKANAHIRAGANA	93
-#define KEY_MUHENKAN		94
-#define KEY_KPJPCOMMA		95
-#define KEY_KPENTER		96
-#define KEY_RIGHTCTRL		97
-#define KEY_KPSLASH		98
-#define KEY_SYSRQ		99
-#define KEY_RIGHTALT		100
-#define KEY_LINEFEED		101
-#define KEY_HOME		102
-#define KEY_UP			103
-#define KEY_PAGEUP		104
-#define KEY_LEFT		105
-#define KEY_RIGHT		106
-#define KEY_END			107
-#define KEY_DOWN		108
-#define KEY_PAGEDOWN		109
-#define KEY_INSERT		110
-#define KEY_DELETE		111
-#define KEY_MACRO		112
-#define KEY_MUTE		113
-#define KEY_VOLUMEDOWN		114
-#define KEY_VOLUMEUP		115
-#define KEY_POWER		116	/* SC System Power Down */
-#define KEY_KPEQUAL		117
-#define KEY_KPPLUSMINUS		118
-#define KEY_PAUSE		119
-#define KEY_SCALE		120	/* AL Compiz Scale (Expose) */
-
-#define KEY_KPCOMMA		121
-#define KEY_HANGEUL		122
-#define KEY_HANGUEL		KEY_HANGEUL
-#define KEY_HANJA		123
-#define KEY_YEN			124
-#define KEY_LEFTMETA		125
-#define KEY_RIGHTMETA		126
-#define KEY_COMPOSE		127
-
-#define KEY_STOP		128	/* AC Stop */
-#define KEY_AGAIN		129
-#define KEY_PROPS		130	/* AC Properties */
-#define KEY_UNDO		131	/* AC Undo */
-#define KEY_FRONT		132
-#define KEY_COPY		133	/* AC Copy */
-#define KEY_OPEN		134	/* AC Open */
-#define KEY_PASTE		135	/* AC Paste */
-#define KEY_FIND		136	/* AC Search */
-#define KEY_CUT			137	/* AC Cut */
-#define KEY_HELP		138	/* AL Integrated Help Center */
-#define KEY_MENU		139	/* Menu (show menu) */
-#define KEY_CALC		140	/* AL Calculator */
-#define KEY_SETUP		141
-#define KEY_SLEEP		142	/* SC System Sleep */
-#define KEY_WAKEUP		143	/* System Wake Up */
-#define KEY_FILE		144	/* AL Local Machine Browser */
-#define KEY_SENDFILE		145
-#define KEY_DELETEFILE		146
-#define KEY_XFER		147
-#define KEY_PROG1		148
-#define KEY_PROG2		149
-#define KEY_WWW			150	/* AL Internet Browser */
-#define KEY_MSDOS		151
-#define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
-#define KEY_SCREENLOCK		KEY_COFFEE
-#define KEY_DIRECTION		153
-#define KEY_CYCLEWINDOWS	154
-#define KEY_MAIL		155
-#define KEY_BOOKMARKS		156	/* AC Bookmarks */
-#define KEY_COMPUTER		157
-#define KEY_BACK		158	/* AC Back */
-#define KEY_FORWARD		159	/* AC Forward */
-#define KEY_CLOSECD		160
-#define KEY_EJECTCD		161
-#define KEY_EJECTCLOSECD	162
-#define KEY_NEXTSONG		163
-#define KEY_PLAYPAUSE		164
-#define KEY_PREVIOUSSONG	165
-#define KEY_STOPCD		166
-#define KEY_RECORD		167
-#define KEY_REWIND		168
-#define KEY_PHONE		169	/* Media Select Telephone */
-#define KEY_ISO			170
-#define KEY_CONFIG		171	/* AL Consumer Control Configuration */
-#define KEY_HOMEPAGE		172	/* AC Home */
-#define KEY_REFRESH		173	/* AC Refresh */
-#define KEY_EXIT		174	/* AC Exit */
-#define KEY_MOVE		175
-#define KEY_EDIT		176
-#define KEY_SCROLLUP		177
-#define KEY_SCROLLDOWN		178
-#define KEY_KPLEFTPAREN		179
-#define KEY_KPRIGHTPAREN	180
-#define KEY_NEW			181	/* AC New */
-#define KEY_REDO		182	/* AC Redo/Repeat */
-
-#define KEY_F13			183
-#define KEY_F14			184
-#define KEY_F15			185
-#define KEY_F16			186
-#define KEY_F17			187
-#define KEY_F18			188
-#define KEY_F19			189
-#define KEY_F20			190
-#define KEY_F21			191
-#define KEY_F22			192
-#define KEY_F23			193
-#define KEY_F24			194
-
-#define KEY_PLAYCD		200
-#define KEY_PAUSECD		201
-#define KEY_PROG3		202
-#define KEY_PROG4		203
-#define KEY_DASHBOARD		204	/* AL Dashboard */
-#define KEY_SUSPEND		205
-#define KEY_CLOSE		206	/* AC Close */
-#define KEY_PLAY		207
-#define KEY_FASTFORWARD		208
-#define KEY_BASSBOOST		209
-#define KEY_PRINT		210	/* AC Print */
-#define KEY_HP			211
-#define KEY_CAMERA		212
-#define KEY_SOUND		213
-#define KEY_QUESTION		214
-#define KEY_EMAIL		215
-#define KEY_CHAT		216
-#define KEY_SEARCH		217
-#define KEY_CONNECT		218
-#define KEY_FINANCE		219	/* AL Checkbook/Finance */
-#define KEY_SPORT		220
-#define KEY_SHOP		221
-#define KEY_ALTERASE		222
-#define KEY_CANCEL		223	/* AC Cancel */
-#define KEY_BRIGHTNESSDOWN	224
-#define KEY_BRIGHTNESSUP	225
-#define KEY_MEDIA		226
-
-#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
-					   outputs (Monitor/LCD/TV-out/etc) */
-#define KEY_KBDILLUMTOGGLE	228
-#define KEY_KBDILLUMDOWN	229
-#define KEY_KBDILLUMUP		230
-
-#define KEY_SEND		231	/* AC Send */
-#define KEY_REPLY		232	/* AC Reply */
-#define KEY_FORWARDMAIL		233	/* AC Forward Msg */
-#define KEY_SAVE		234	/* AC Save */
-#define KEY_DOCUMENTS		235
-
-#define KEY_BATTERY		236
-
-#define KEY_BLUETOOTH		237
-#define KEY_WLAN		238
-#define KEY_UWB			239
-
-#define KEY_UNKNOWN		240
-
-#define KEY_VIDEO_NEXT		241	/* drive next video source */
-#define KEY_VIDEO_PREV		242	/* drive previous video source */
-#define KEY_BRIGHTNESS_CYCLE	243	/* brightness up, after max is min */
-#define KEY_BRIGHTNESS_ZERO	244	/* brightness off, use ambient */
-#define KEY_DISPLAY_OFF		245	/* display device to off state */
-
-#define KEY_WIMAX		246
-#define KEY_RFKILL		247	/* Key that controls all radios */
-
-#define KEY_MICMUTE		248	/* Mute / unmute the microphone */
-
-/* Code 255 is reserved for special needs of AT keyboard driver */
-
-#define BTN_MISC		0x100
-#define BTN_0			0x100
-#define BTN_1			0x101
-#define BTN_2			0x102
-#define BTN_3			0x103
-#define BTN_4			0x104
-#define BTN_5			0x105
-#define BTN_6			0x106
-#define BTN_7			0x107
-#define BTN_8			0x108
-#define BTN_9			0x109
-
-#define BTN_MOUSE		0x110
-#define BTN_LEFT		0x110
-#define BTN_RIGHT		0x111
-#define BTN_MIDDLE		0x112
-#define BTN_SIDE		0x113
-#define BTN_EXTRA		0x114
-#define BTN_FORWARD		0x115
-#define BTN_BACK		0x116
-#define BTN_TASK		0x117
-
-#define BTN_JOYSTICK		0x120
-#define BTN_TRIGGER		0x120
-#define BTN_THUMB		0x121
-#define BTN_THUMB2		0x122
-#define BTN_TOP			0x123
-#define BTN_TOP2		0x124
-#define BTN_PINKIE		0x125
-#define BTN_BASE		0x126
-#define BTN_BASE2		0x127
-#define BTN_BASE3		0x128
-#define BTN_BASE4		0x129
-#define BTN_BASE5		0x12a
-#define BTN_BASE6		0x12b
-#define BTN_DEAD		0x12f
-
-#define BTN_GAMEPAD		0x130
-#define BTN_A			0x130
-#define BTN_B			0x131
-#define BTN_C			0x132
-#define BTN_X			0x133
-#define BTN_Y			0x134
-#define BTN_Z			0x135
-#define BTN_TL			0x136
-#define BTN_TR			0x137
-#define BTN_TL2			0x138
-#define BTN_TR2			0x139
-#define BTN_SELECT		0x13a
-#define BTN_START		0x13b
-#define BTN_MODE		0x13c
-#define BTN_THUMBL		0x13d
-#define BTN_THUMBR		0x13e
-
-#define BTN_DIGI		0x140
-#define BTN_TOOL_PEN		0x140
-#define BTN_TOOL_RUBBER		0x141
-#define BTN_TOOL_BRUSH		0x142
-#define BTN_TOOL_PENCIL		0x143
-#define BTN_TOOL_AIRBRUSH	0x144
-#define BTN_TOOL_FINGER		0x145
-#define BTN_TOOL_MOUSE		0x146
-#define BTN_TOOL_LENS		0x147
-#define BTN_TOOL_QUINTTAP	0x148	/* Five fingers on trackpad */
-#define BTN_TOUCH		0x14a
-#define BTN_STYLUS		0x14b
-#define BTN_STYLUS2		0x14c
-#define BTN_TOOL_DOUBLETAP	0x14d
-#define BTN_TOOL_TRIPLETAP	0x14e
-#define BTN_TOOL_QUADTAP	0x14f	/* Four fingers on trackpad */
-
-#define BTN_WHEEL		0x150
-#define BTN_GEAR_DOWN		0x150
-#define BTN_GEAR_UP		0x151
-
-#define KEY_OK			0x160
-#define KEY_SELECT		0x161
-#define KEY_GOTO		0x162
-#define KEY_CLEAR		0x163
-#define KEY_POWER2		0x164
-#define KEY_OPTION		0x165
-#define KEY_INFO		0x166	/* AL OEM Features/Tips/Tutorial */
-#define KEY_TIME		0x167
-#define KEY_VENDOR		0x168
-#define KEY_ARCHIVE		0x169
-#define KEY_PROGRAM		0x16a	/* Media Select Program Guide */
-#define KEY_CHANNEL		0x16b
-#define KEY_FAVORITES		0x16c
-#define KEY_EPG			0x16d
-#define KEY_PVR			0x16e	/* Media Select Home */
-#define KEY_MHP			0x16f
-#define KEY_LANGUAGE		0x170
-#define KEY_TITLE		0x171
-#define KEY_SUBTITLE		0x172
-#define KEY_ANGLE		0x173
-#define KEY_ZOOM		0x174
-#define KEY_MODE		0x175
-#define KEY_KEYBOARD		0x176
-#define KEY_SCREEN		0x177
-#define KEY_PC			0x178	/* Media Select Computer */
-#define KEY_TV			0x179	/* Media Select TV */
-#define KEY_TV2			0x17a	/* Media Select Cable */
-#define KEY_VCR			0x17b	/* Media Select VCR */
-#define KEY_VCR2		0x17c	/* VCR Plus */
-#define KEY_SAT			0x17d	/* Media Select Satellite */
-#define KEY_SAT2		0x17e
-#define KEY_CD			0x17f	/* Media Select CD */
-#define KEY_TAPE		0x180	/* Media Select Tape */
-#define KEY_RADIO		0x181
-#define KEY_TUNER		0x182	/* Media Select Tuner */
-#define KEY_PLAYER		0x183
-#define KEY_TEXT		0x184
-#define KEY_DVD			0x185	/* Media Select DVD */
-#define KEY_AUX			0x186
-#define KEY_MP3			0x187
-#define KEY_AUDIO		0x188	/* AL Audio Browser */
-#define KEY_VIDEO		0x189	/* AL Movie Browser */
-#define KEY_DIRECTORY		0x18a
-#define KEY_LIST		0x18b
-#define KEY_MEMO		0x18c	/* Media Select Messages */
-#define KEY_CALENDAR		0x18d
-#define KEY_RED			0x18e
-#define KEY_GREEN		0x18f
-#define KEY_YELLOW		0x190
-#define KEY_BLUE		0x191
-#define KEY_CHANNELUP		0x192	/* Channel Increment */
-#define KEY_CHANNELDOWN		0x193	/* Channel Decrement */
-#define KEY_FIRST		0x194
-#define KEY_LAST		0x195	/* Recall Last */
-#define KEY_AB			0x196
-#define KEY_NEXT		0x197
-#define KEY_RESTART		0x198
-#define KEY_SLOW		0x199
-#define KEY_SHUFFLE		0x19a
-#define KEY_BREAK		0x19b
-#define KEY_PREVIOUS		0x19c
-#define KEY_DIGITS		0x19d
-#define KEY_TEEN		0x19e
-#define KEY_TWEN		0x19f
-#define KEY_VIDEOPHONE		0x1a0	/* Media Select Video Phone */
-#define KEY_GAMES		0x1a1	/* Media Select Games */
-#define KEY_ZOOMIN		0x1a2	/* AC Zoom In */
-#define KEY_ZOOMOUT		0x1a3	/* AC Zoom Out */
-#define KEY_ZOOMRESET		0x1a4	/* AC Zoom */
-#define KEY_WORDPROCESSOR	0x1a5	/* AL Word Processor */
-#define KEY_EDITOR		0x1a6	/* AL Text Editor */
-#define KEY_SPREADSHEET		0x1a7	/* AL Spreadsheet */
-#define KEY_GRAPHICSEDITOR	0x1a8	/* AL Graphics Editor */
-#define KEY_PRESENTATION	0x1a9	/* AL Presentation App */
-#define KEY_DATABASE		0x1aa	/* AL Database App */
-#define KEY_NEWS		0x1ab	/* AL Newsreader */
-#define KEY_VOICEMAIL		0x1ac	/* AL Voicemail */
-#define KEY_ADDRESSBOOK		0x1ad	/* AL Contacts/Address Book */
-#define KEY_MESSENGER		0x1ae	/* AL Instant Messaging */
-#define KEY_DISPLAYTOGGLE	0x1af	/* Turn display (LCD) on and off */
-#define KEY_SPELLCHECK		0x1b0   /* AL Spell Check */
-#define KEY_LOGOFF		0x1b1   /* AL Logoff */
-
-#define KEY_DOLLAR		0x1b2
-#define KEY_EURO		0x1b3
-
-#define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
-#define KEY_FRAMEFORWARD	0x1b5
-#define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
-#define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
-#define KEY_10CHANNELSUP	0x1b8	/* 10 channels up (10+) */
-#define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
-#define KEY_IMAGES		0x1ba	/* AL Image Browser */
-
-#define KEY_DEL_EOL		0x1c0
-#define KEY_DEL_EOS		0x1c1
-#define KEY_INS_LINE		0x1c2
-#define KEY_DEL_LINE		0x1c3
-
-#define KEY_FN			0x1d0
-#define KEY_FN_ESC		0x1d1
-#define KEY_FN_F1		0x1d2
-#define KEY_FN_F2		0x1d3
-#define KEY_FN_F3		0x1d4
-#define KEY_FN_F4		0x1d5
-#define KEY_FN_F5		0x1d6
-#define KEY_FN_F6		0x1d7
-#define KEY_FN_F7		0x1d8
-#define KEY_FN_F8		0x1d9
-#define KEY_FN_F9		0x1da
-#define KEY_FN_F10		0x1db
-#define KEY_FN_F11		0x1dc
-#define KEY_FN_F12		0x1dd
-#define KEY_FN_1		0x1de
-#define KEY_FN_2		0x1df
-#define KEY_FN_D		0x1e0
-#define KEY_FN_E		0x1e1
-#define KEY_FN_F		0x1e2
-#define KEY_FN_S		0x1e3
-#define KEY_FN_B		0x1e4
-
-#define KEY_BRL_DOT1		0x1f1
-#define KEY_BRL_DOT2		0x1f2
-#define KEY_BRL_DOT3		0x1f3
-#define KEY_BRL_DOT4		0x1f4
-#define KEY_BRL_DOT5		0x1f5
-#define KEY_BRL_DOT6		0x1f6
-#define KEY_BRL_DOT7		0x1f7
-#define KEY_BRL_DOT8		0x1f8
-#define KEY_BRL_DOT9		0x1f9
-#define KEY_BRL_DOT10		0x1fa
-
-#define KEY_NUMERIC_0		0x200	/* used by phones, remote controls, */
-#define KEY_NUMERIC_1		0x201	/* and other keypads */
-#define KEY_NUMERIC_2		0x202
-#define KEY_NUMERIC_3		0x203
-#define KEY_NUMERIC_4		0x204
-#define KEY_NUMERIC_5		0x205
-#define KEY_NUMERIC_6		0x206
-#define KEY_NUMERIC_7		0x207
-#define KEY_NUMERIC_8		0x208
-#define KEY_NUMERIC_9		0x209
-#define KEY_NUMERIC_STAR	0x20a
-#define KEY_NUMERIC_POUND	0x20b
-
-#define KEY_CAMERA_FOCUS	0x210
-#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
-
-#define KEY_TOUCHPAD_TOGGLE	0x212	/* Request switch touchpad on or off */
-#define KEY_TOUCHPAD_ON		0x213
-#define KEY_TOUCHPAD_OFF	0x214
-
-#define KEY_CAMERA_ZOOMIN	0x215
-#define KEY_CAMERA_ZOOMOUT	0x216
-#define KEY_CAMERA_UP		0x217
-#define KEY_CAMERA_DOWN		0x218
-#define KEY_CAMERA_LEFT		0x219
-#define KEY_CAMERA_RIGHT	0x21a
-
-#define BTN_TRIGGER_HAPPY		0x2c0
-#define BTN_TRIGGER_HAPPY1		0x2c0
-#define BTN_TRIGGER_HAPPY2		0x2c1
-#define BTN_TRIGGER_HAPPY3		0x2c2
-#define BTN_TRIGGER_HAPPY4		0x2c3
-#define BTN_TRIGGER_HAPPY5		0x2c4
-#define BTN_TRIGGER_HAPPY6		0x2c5
-#define BTN_TRIGGER_HAPPY7		0x2c6
-#define BTN_TRIGGER_HAPPY8		0x2c7
-#define BTN_TRIGGER_HAPPY9		0x2c8
-#define BTN_TRIGGER_HAPPY10		0x2c9
-#define BTN_TRIGGER_HAPPY11		0x2ca
-#define BTN_TRIGGER_HAPPY12		0x2cb
-#define BTN_TRIGGER_HAPPY13		0x2cc
-#define BTN_TRIGGER_HAPPY14		0x2cd
-#define BTN_TRIGGER_HAPPY15		0x2ce
-#define BTN_TRIGGER_HAPPY16		0x2cf
-#define BTN_TRIGGER_HAPPY17		0x2d0
-#define BTN_TRIGGER_HAPPY18		0x2d1
-#define BTN_TRIGGER_HAPPY19		0x2d2
-#define BTN_TRIGGER_HAPPY20		0x2d3
-#define BTN_TRIGGER_HAPPY21		0x2d4
-#define BTN_TRIGGER_HAPPY22		0x2d5
-#define BTN_TRIGGER_HAPPY23		0x2d6
-#define BTN_TRIGGER_HAPPY24		0x2d7
-#define BTN_TRIGGER_HAPPY25		0x2d8
-#define BTN_TRIGGER_HAPPY26		0x2d9
-#define BTN_TRIGGER_HAPPY27		0x2da
-#define BTN_TRIGGER_HAPPY28		0x2db
-#define BTN_TRIGGER_HAPPY29		0x2dc
-#define BTN_TRIGGER_HAPPY30		0x2dd
-#define BTN_TRIGGER_HAPPY31		0x2de
-#define BTN_TRIGGER_HAPPY32		0x2df
-#define BTN_TRIGGER_HAPPY33		0x2e0
-#define BTN_TRIGGER_HAPPY34		0x2e1
-#define BTN_TRIGGER_HAPPY35		0x2e2
-#define BTN_TRIGGER_HAPPY36		0x2e3
-#define BTN_TRIGGER_HAPPY37		0x2e4
-#define BTN_TRIGGER_HAPPY38		0x2e5
-#define BTN_TRIGGER_HAPPY39		0x2e6
-#define BTN_TRIGGER_HAPPY40		0x2e7
-
-/* We avoid low common keys in module aliases so they don't get huge. */
-#define KEY_MIN_INTERESTING	KEY_MUTE
-#define KEY_MAX			0x2ff
-#define KEY_CNT			(KEY_MAX+1)
-
-/*
- * Relative axes
- */
-
-#define REL_X			0x00
-#define REL_Y			0x01
-#define REL_Z			0x02
-#define REL_RX			0x03
-#define REL_RY			0x04
-#define REL_RZ			0x05
-#define REL_HWHEEL		0x06
-#define REL_DIAL		0x07
-#define REL_WHEEL		0x08
-#define REL_MISC		0x09
-#define REL_MAX			0x0f
-#define REL_CNT			(REL_MAX+1)
-
-/*
- * Absolute axes
- */
-
-#define ABS_X			0x00
-#define ABS_Y			0x01
-#define ABS_Z			0x02
-#define ABS_RX			0x03
-#define ABS_RY			0x04
-#define ABS_RZ			0x05
-#define ABS_THROTTLE		0x06
-#define ABS_RUDDER		0x07
-#define ABS_WHEEL		0x08
-#define ABS_GAS			0x09
-#define ABS_BRAKE		0x0a
-#define ABS_HAT0X		0x10
-#define ABS_HAT0Y		0x11
-#define ABS_HAT1X		0x12
-#define ABS_HAT1Y		0x13
-#define ABS_HAT2X		0x14
-#define ABS_HAT2Y		0x15
-#define ABS_HAT3X		0x16
-#define ABS_HAT3Y		0x17
-#define ABS_PRESSURE		0x18
-#define ABS_DISTANCE		0x19
-#define ABS_TILT_X		0x1a
-#define ABS_TILT_Y		0x1b
-#define ABS_TOOL_WIDTH		0x1c
-
-#define ABS_VOLUME		0x20
-
-#define ABS_MISC		0x28
-
-#define ABS_MT_SLOT		0x2f	/* MT slot being modified */
-#define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
-#define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */
-#define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
-#define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
-#define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
-#define ABS_MT_POSITION_X	0x35	/* Center X touch position */
-#define ABS_MT_POSITION_Y	0x36	/* Center Y touch position */
-#define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
-#define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
-#define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
-#define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
-#define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
-#define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
-#define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */
-
-#ifdef __KERNEL__
+#include <uapi/linux/input.h>
 /* Implementation details, userspace should not care about these */
 #define ABS_MT_FIRST		ABS_MT_TOUCH_MAJOR
 #define ABS_MT_LAST		ABS_MT_TOOL_Y
-#endif
-
-#define ABS_MAX			0x3f
-#define ABS_CNT			(ABS_MAX+1)
-
-/*
- * Switch events
- */
-
-#define SW_LID			0x00  /* set = lid shut */
-#define SW_TABLET_MODE		0x01  /* set = tablet mode */
-#define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
-#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
-					 set = radio enabled */
-#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
-#define SW_MICROPHONE_INSERT	0x04  /* set = inserted */
-#define SW_DOCK			0x05  /* set = plugged into dock */
-#define SW_LINEOUT_INSERT	0x06  /* set = inserted */
-#define SW_JACK_PHYSICAL_INSERT 0x07  /* set = mechanical switch set */
-#define SW_VIDEOOUT_INSERT	0x08  /* set = inserted */
-#define SW_CAMERA_LENS_COVER	0x09  /* set = lens covered */
-#define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
-#define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
-#define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
-#define SW_LINEIN_INSERT	0x0d  /* set = inserted */
-#define SW_MAX			0x0f
-#define SW_CNT			(SW_MAX+1)
-
-/*
- * Misc events
- */
-
-#define MSC_SERIAL		0x00
-#define MSC_PULSELED		0x01
-#define MSC_GESTURE		0x02
-#define MSC_RAW			0x03
-#define MSC_SCAN		0x04
-#define MSC_MAX			0x07
-#define MSC_CNT			(MSC_MAX+1)
-
-/*
- * LEDs
- */
-
-#define LED_NUML		0x00
-#define LED_CAPSL		0x01
-#define LED_SCROLLL		0x02
-#define LED_COMPOSE		0x03
-#define LED_KANA		0x04
-#define LED_SLEEP		0x05
-#define LED_SUSPEND		0x06
-#define LED_MUTE		0x07
-#define LED_MISC		0x08
-#define LED_MAIL		0x09
-#define LED_CHARGING		0x0a
-#define LED_MAX			0x0f
-#define LED_CNT			(LED_MAX+1)
-
-/*
- * Autorepeat values
- */
-
-#define REP_DELAY		0x00
-#define REP_PERIOD		0x01
-#define REP_MAX			0x01
-#define REP_CNT			(REP_MAX+1)
-
-/*
- * Sounds
- */
-
-#define SND_CLICK		0x00
-#define SND_BELL		0x01
-#define SND_TONE		0x02
-#define SND_MAX			0x07
-#define SND_CNT			(SND_MAX+1)
-
-/*
- * IDs.
- */
-
-#define ID_BUS			0
-#define ID_VENDOR		1
-#define ID_PRODUCT		2
-#define ID_VERSION		3
-
-#define BUS_PCI			0x01
-#define BUS_ISAPNP		0x02
-#define BUS_USB			0x03
-#define BUS_HIL			0x04
-#define BUS_BLUETOOTH		0x05
-#define BUS_VIRTUAL		0x06
-
-#define BUS_ISA			0x10
-#define BUS_I8042		0x11
-#define BUS_XTKBD		0x12
-#define BUS_RS232		0x13
-#define BUS_GAMEPORT		0x14
-#define BUS_PARPORT		0x15
-#define BUS_AMIGA		0x16
-#define BUS_ADB			0x17
-#define BUS_I2C			0x18
-#define BUS_HOST		0x19
-#define BUS_GSC			0x1A
-#define BUS_ATARI		0x1B
-#define BUS_SPI			0x1C
-
-/*
- * MT_TOOL types
- */
-#define MT_TOOL_FINGER		0
-#define MT_TOOL_PEN		1
-#define MT_TOOL_MAX		1
-
-/*
- * Values describing the status of a force-feedback effect
- */
-#define FF_STATUS_STOPPED	0x00
-#define FF_STATUS_PLAYING	0x01
-#define FF_STATUS_MAX		0x01
-
-/*
- * Structures used in ioctls to upload effects to a device
- * They are pieces of a bigger structure (called ff_effect)
- */
-
-/*
- * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
- * should not be used and have unspecified results.
- */
-
-/**
- * struct ff_replay - defines scheduling of the force-feedback effect
- * @length: duration of the effect
- * @delay: delay before effect should start playing
- */
-struct ff_replay {
-	__u16 length;
-	__u16 delay;
-};
-
-/**
- * struct ff_trigger - defines what triggers the force-feedback effect
- * @button: number of the button triggering the effect
- * @interval: controls how soon the effect can be re-triggered
- */
-struct ff_trigger {
-	__u16 button;
-	__u16 interval;
-};
-
-/**
- * struct ff_envelope - generic force-feedback effect envelope
- * @attack_length: duration of the attack (ms)
- * @attack_level: level at the beginning of the attack
- * @fade_length: duration of fade (ms)
- * @fade_level: level at the end of fade
- *
- * The @attack_level and @fade_level are absolute values; when applying
- * envelope force-feedback core will convert to positive/negative
- * value based on polarity of the default level of the effect.
- * Valid range for the attack and fade levels is 0x0000 - 0x7fff
- */
-struct ff_envelope {
-	__u16 attack_length;
-	__u16 attack_level;
-	__u16 fade_length;
-	__u16 fade_level;
-};
-
-/**
- * struct ff_constant_effect - defines parameters of a constant force-feedback effect
- * @level: strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_constant_effect {
-	__s16 level;
-	struct ff_envelope envelope;
-};
-
-/**
- * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
- * @start_level: beginning strength of the effect; may be negative
- * @end_level: final strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_ramp_effect {
-	__s16 start_level;
-	__s16 end_level;
-	struct ff_envelope envelope;
-};
-
-/**
- * struct ff_condition_effect - defines a spring or friction force-feedback effect
- * @right_saturation: maximum level when joystick moved all way to the right
- * @left_saturation: same for the left side
- * @right_coeff: controls how fast the force grows when the joystick moves
- *	to the right
- * @left_coeff: same for the left side
- * @deadband: size of the dead zone, where no force is produced
- * @center: position of the dead zone
- */
-struct ff_condition_effect {
-	__u16 right_saturation;
-	__u16 left_saturation;
-
-	__s16 right_coeff;
-	__s16 left_coeff;
-
-	__u16 deadband;
-	__s16 center;
-};
-
-/**
- * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
- * @waveform: kind of the effect (wave)
- * @period: period of the wave (ms)
- * @magnitude: peak value
- * @offset: mean value of the wave (roughly)
- * @phase: 'horizontal' shift
- * @envelope: envelope data
- * @custom_len: number of samples (FF_CUSTOM only)
- * @custom_data: buffer of samples (FF_CUSTOM only)
- *
- * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
- * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
- * for the time being as no driver supports it yet.
- *
- * Note: the data pointed by custom_data is copied by the driver.
- * You can therefore dispose of the memory after the upload/update.
- */
-struct ff_periodic_effect {
-	__u16 waveform;
-	__u16 period;
-	__s16 magnitude;
-	__s16 offset;
-	__u16 phase;
-
-	struct ff_envelope envelope;
-
-	__u32 custom_len;
-	__s16 __user *custom_data;
-};
-
-/**
- * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
- * @strong_magnitude: magnitude of the heavy motor
- * @weak_magnitude: magnitude of the light one
- *
- * Some rumble pads have two motors of different weight. Strong_magnitude
- * represents the magnitude of the vibration generated by the heavy one.
- */
-struct ff_rumble_effect {
-	__u16 strong_magnitude;
-	__u16 weak_magnitude;
-};
-
-/**
- * struct ff_effect - defines force feedback effect
- * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
- *	FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
- * @id: an unique id assigned to an effect
- * @direction: direction of the effect
- * @trigger: trigger conditions (struct ff_trigger)
- * @replay: scheduling of the effect (struct ff_replay)
- * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
- *	ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
- *	defining effect parameters
- *
- * This structure is sent through ioctl from the application to the driver.
- * To create a new effect application should set its @id to -1; the kernel
- * will return assigned @id which can later be used to update or delete
- * this effect.
- *
- * Direction of the effect is encoded as follows:
- *	0 deg -> 0x0000 (down)
- *	90 deg -> 0x4000 (left)
- *	180 deg -> 0x8000 (up)
- *	270 deg -> 0xC000 (right)
- */
-struct ff_effect {
-	__u16 type;
-	__s16 id;
-	__u16 direction;
-	struct ff_trigger trigger;
-	struct ff_replay replay;
-
-	union {
-		struct ff_constant_effect constant;
-		struct ff_ramp_effect ramp;
-		struct ff_periodic_effect periodic;
-		struct ff_condition_effect condition[2]; /* One for each axis */
-		struct ff_rumble_effect rumble;
-	} u;
-};
-
-/*
- * Force feedback effect types
- */
-
-#define FF_RUMBLE	0x50
-#define FF_PERIODIC	0x51
-#define FF_CONSTANT	0x52
-#define FF_SPRING	0x53
-#define FF_FRICTION	0x54
-#define FF_DAMPER	0x55
-#define FF_INERTIA	0x56
-#define FF_RAMP		0x57
-
-#define FF_EFFECT_MIN	FF_RUMBLE
-#define FF_EFFECT_MAX	FF_RAMP
-
-/*
- * Force feedback periodic effect types
- */
-
-#define FF_SQUARE	0x58
-#define FF_TRIANGLE	0x59
-#define FF_SINE		0x5a
-#define FF_SAW_UP	0x5b
-#define FF_SAW_DOWN	0x5c
-#define FF_CUSTOM	0x5d
-
-#define FF_WAVEFORM_MIN	FF_SQUARE
-#define FF_WAVEFORM_MAX	FF_CUSTOM
-
-/*
- * Set ff device properties
- */
-
-#define FF_GAIN		0x60
-#define FF_AUTOCENTER	0x61
-
-#define FF_MAX		0x7f
-#define FF_CNT		(FF_MAX+1)
-
-#ifdef __KERNEL__
 
 /*
  * In-kernel definitions.
@@ -1668,4 +524,3 @@ int input_ff_create_memless(struct input_dev *dev, void *data,
 		int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
 
 #endif
-#endif
diff --git a/include/linux/ioctl.h b/include/linux/ioctl.h
deleted file mode 100644
index aa91eb3951ef..000000000000
--- a/include/linux/ioctl.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _LINUX_IOCTL_H
-#define _LINUX_IOCTL_H
-
-#include <asm/ioctl.h>
-
-#endif /* _LINUX_IOCTL_H */
-
diff --git a/include/linux/ip.h b/include/linux/ip.h
index bd0a2a8631c6..58b82a22a52b 100644
--- a/include/linux/ip.h
+++ b/include/linux/ip.h
@@ -16,96 +16,9 @@
  */
 #ifndef _LINUX_IP_H
 #define _LINUX_IP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
 
-#define IPTOS_TOS_MASK		0x1E
-#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
-#define	IPTOS_LOWDELAY		0x10
-#define	IPTOS_THROUGHPUT	0x08
-#define	IPTOS_RELIABILITY	0x04
-#define	IPTOS_MINCOST		0x02
-
-#define IPTOS_PREC_MASK		0xE0
-#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
-#define IPTOS_PREC_NETCONTROL           0xe0
-#define IPTOS_PREC_INTERNETCONTROL      0xc0
-#define IPTOS_PREC_CRITIC_ECP           0xa0
-#define IPTOS_PREC_FLASHOVERRIDE        0x80
-#define IPTOS_PREC_FLASH                0x60
-#define IPTOS_PREC_IMMEDIATE            0x40
-#define IPTOS_PREC_PRIORITY             0x20
-#define IPTOS_PREC_ROUTINE              0x00
-
-
-/* IP options */
-#define IPOPT_COPY		0x80
-#define IPOPT_CLASS_MASK	0x60
-#define IPOPT_NUMBER_MASK	0x1f
-
-#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
-#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
-#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
-
-#define	IPOPT_CONTROL		0x00
-#define	IPOPT_RESERVED1		0x20
-#define	IPOPT_MEASUREMENT	0x40
-#define	IPOPT_RESERVED2		0x60
-
-#define IPOPT_END	(0 |IPOPT_CONTROL)
-#define IPOPT_NOOP	(1 |IPOPT_CONTROL)
-#define IPOPT_SEC	(2 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_LSRR	(3 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_TIMESTAMP	(4 |IPOPT_MEASUREMENT)
-#define IPOPT_CIPSO	(6 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RR	(7 |IPOPT_CONTROL)
-#define IPOPT_SID	(8 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_SSRR	(9 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RA	(20|IPOPT_CONTROL|IPOPT_COPY)
-
-#define IPVERSION	4
-#define MAXTTL		255
-#define IPDEFTTL	64
-
-#define IPOPT_OPTVAL 0
-#define IPOPT_OLEN   1
-#define IPOPT_OFFSET 2
-#define IPOPT_MINOFF 4
-#define MAX_IPOPTLEN 40
-#define IPOPT_NOP IPOPT_NOOP
-#define IPOPT_EOL IPOPT_END
-#define IPOPT_TS  IPOPT_TIMESTAMP
-
-#define	IPOPT_TS_TSONLY		0		/* timestamps only */
-#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
-#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
-
-#define IPV4_BEET_PHMAXLEN 8
-
-struct iphdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	ihl:4,
-		version:4;
-#elif defined (__BIG_ENDIAN_BITFIELD)
-	__u8	version:4,
-  		ihl:4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8	tos;
-	__be16	tot_len;
-	__be16	id;
-	__be16	frag_off;
-	__u8	ttl;
-	__u8	protocol;
-	__sum16	check;
-	__be32	saddr;
-	__be32	daddr;
-	/*The options start here. */
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/ip.h>
 
 static inline struct iphdr *ip_hdr(const struct sk_buff *skb)
 {
@@ -116,34 +29,4 @@ static inline struct iphdr *ipip_hdr(const struct sk_buff *skb)
 {
 	return (struct iphdr *)skb_transport_header(skb);
 }
-#endif
-
-struct ip_auth_hdr {
-	__u8  nexthdr;
-	__u8  hdrlen;		/* This one is measured in 32 bit units! */
-	__be16 reserved;
-	__be32 spi;
-	__be32 seq_no;		/* Sequence number */
-	__u8  auth_data[0];	/* Variable len but >=4. Mind the 64 bit alignment! */
-};
-
-struct ip_esp_hdr {
-	__be32 spi;
-	__be32 seq_no;		/* Sequence number */
-	__u8  enc_data[0];	/* Variable len but >=8. Mind the 64 bit alignment! */
-};
-
-struct ip_comp_hdr {
-	__u8 nexthdr;
-	__u8 flags;
-	__be16 cpi;
-};
-
-struct ip_beet_phdr {
-	__u8 nexthdr;
-	__u8 hdrlen;
-	__u8 padlen;
-	__u8 reserved;
-};
-
 #endif	/* _LINUX_IP_H */
diff --git a/include/linux/ip6_tunnel.h b/include/linux/ip6_tunnel.h
deleted file mode 100644
index 48af63c9a48d..000000000000
--- a/include/linux/ip6_tunnel.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _IP6_TUNNEL_H
-#define _IP6_TUNNEL_H
-
-#include <linux/types.h>
-
-#define IPV6_TLV_TNL_ENCAP_LIMIT 4
-#define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4
-
-/* don't add encapsulation limit if one isn't present in inner packet */
-#define IP6_TNL_F_IGN_ENCAP_LIMIT 0x1
-/* copy the traffic class field from the inner packet */
-#define IP6_TNL_F_USE_ORIG_TCLASS 0x2
-/* copy the flowlabel from the inner packet */
-#define IP6_TNL_F_USE_ORIG_FLOWLABEL 0x4
-/* being used for Mobile IPv6 */
-#define IP6_TNL_F_MIP6_DEV 0x8
-/* copy DSCP from the outer packet */
-#define IP6_TNL_F_RCV_DSCP_COPY 0x10
-/* copy fwmark from inner packet */
-#define IP6_TNL_F_USE_ORIG_FWMARK 0x20
-
-struct ip6_tnl_parm {
-	char name[IFNAMSIZ];	/* name of tunnel device */
-	int link;		/* ifindex of underlying L2 interface */
-	__u8 proto;		/* tunnel protocol */
-	__u8 encap_limit;	/* encapsulation limit for tunnel */
-	__u8 hop_limit;		/* hop limit for tunnel */
-	__be32 flowinfo;	/* traffic class and flowlabel for tunnel */
-	__u32 flags;		/* tunnel flags */
-	struct in6_addr laddr;	/* local tunnel end-point address */
-	struct in6_addr raddr;	/* remote tunnel end-point address */
-};
-
-struct ip6_tnl_parm2 {
-	char name[IFNAMSIZ];	/* name of tunnel device */
-	int link;		/* ifindex of underlying L2 interface */
-	__u8 proto;		/* tunnel protocol */
-	__u8 encap_limit;	/* encapsulation limit for tunnel */
-	__u8 hop_limit;		/* hop limit for tunnel */
-	__be32 flowinfo;	/* traffic class and flowlabel for tunnel */
-	__u32 flags;		/* tunnel flags */
-	struct in6_addr laddr;	/* local tunnel end-point address */
-	struct in6_addr raddr;	/* remote tunnel end-point address */
-
-	__be16			i_flags;
-	__be16			o_flags;
-	__be32			i_key;
-	__be32			o_key;
-};
-
-#endif
diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h
deleted file mode 100644
index 8a2d438dc499..000000000000
--- a/include/linux/ip_vs.h
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- *      IP Virtual Server
- *      data structure and functionality definitions
- */
-
-#ifndef _IP_VS_H
-#define _IP_VS_H
-
-#include <linux/types.h>	/* For __beXX types in userland */
-
-#define IP_VS_VERSION_CODE	0x010201
-#define NVERSION(version)			\
-	(version >> 16) & 0xFF,			\
-	(version >> 8) & 0xFF,			\
-	version & 0xFF
-
-/*
- *      Virtual Service Flags
- */
-#define IP_VS_SVC_F_PERSISTENT	0x0001		/* persistent port */
-#define IP_VS_SVC_F_HASHED	0x0002		/* hashed entry */
-#define IP_VS_SVC_F_ONEPACKET	0x0004		/* one-packet scheduling */
-
-/*
- *      Destination Server Flags
- */
-#define IP_VS_DEST_F_AVAILABLE	0x0001		/* server is available */
-#define IP_VS_DEST_F_OVERLOAD	0x0002		/* server is overloaded */
-
-/*
- *      IPVS sync daemon states
- */
-#define IP_VS_STATE_NONE	0x0000		/* daemon is stopped */
-#define IP_VS_STATE_MASTER	0x0001		/* started as master */
-#define IP_VS_STATE_BACKUP	0x0002		/* started as backup */
-
-/*
- *      IPVS socket options
- */
-#define IP_VS_BASE_CTL		(64+1024+64)		/* base */
-
-#define IP_VS_SO_SET_NONE	IP_VS_BASE_CTL		/* just peek */
-#define IP_VS_SO_SET_INSERT	(IP_VS_BASE_CTL+1)
-#define IP_VS_SO_SET_ADD	(IP_VS_BASE_CTL+2)
-#define IP_VS_SO_SET_EDIT	(IP_VS_BASE_CTL+3)
-#define IP_VS_SO_SET_DEL	(IP_VS_BASE_CTL+4)
-#define IP_VS_SO_SET_FLUSH	(IP_VS_BASE_CTL+5)
-#define IP_VS_SO_SET_LIST	(IP_VS_BASE_CTL+6)
-#define IP_VS_SO_SET_ADDDEST	(IP_VS_BASE_CTL+7)
-#define IP_VS_SO_SET_DELDEST	(IP_VS_BASE_CTL+8)
-#define IP_VS_SO_SET_EDITDEST	(IP_VS_BASE_CTL+9)
-#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)
-#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
-#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
-#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
-#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
-#define IP_VS_SO_SET_ZERO	(IP_VS_BASE_CTL+15)
-#define IP_VS_SO_SET_MAX	IP_VS_SO_SET_ZERO
-
-#define IP_VS_SO_GET_VERSION	IP_VS_BASE_CTL
-#define IP_VS_SO_GET_INFO	(IP_VS_BASE_CTL+1)
-#define IP_VS_SO_GET_SERVICES	(IP_VS_BASE_CTL+2)
-#define IP_VS_SO_GET_SERVICE	(IP_VS_BASE_CTL+3)
-#define IP_VS_SO_GET_DESTS	(IP_VS_BASE_CTL+4)
-#define IP_VS_SO_GET_DEST	(IP_VS_BASE_CTL+5)	/* not used now */
-#define IP_VS_SO_GET_TIMEOUT	(IP_VS_BASE_CTL+6)
-#define IP_VS_SO_GET_DAEMON	(IP_VS_BASE_CTL+7)
-#define IP_VS_SO_GET_MAX	IP_VS_SO_GET_DAEMON
-
-
-/*
- *      IPVS Connection Flags
- *      Only flags 0..15 are sent to backup server
- */
-#define IP_VS_CONN_F_FWD_MASK	0x0007		/* mask for the fwd methods */
-#define IP_VS_CONN_F_MASQ	0x0000		/* masquerading/NAT */
-#define IP_VS_CONN_F_LOCALNODE	0x0001		/* local node */
-#define IP_VS_CONN_F_TUNNEL	0x0002		/* tunneling */
-#define IP_VS_CONN_F_DROUTE	0x0003		/* direct routing */
-#define IP_VS_CONN_F_BYPASS	0x0004		/* cache bypass */
-#define IP_VS_CONN_F_SYNC	0x0020		/* entry created by sync */
-#define IP_VS_CONN_F_HASHED	0x0040		/* hashed entry */
-#define IP_VS_CONN_F_NOOUTPUT	0x0080		/* no output packets */
-#define IP_VS_CONN_F_INACTIVE	0x0100		/* not established */
-#define IP_VS_CONN_F_OUT_SEQ	0x0200		/* must do output seq adjust */
-#define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
-#define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
-#define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
-#define IP_VS_CONN_F_TEMPLATE	0x1000		/* template, not connection */
-#define IP_VS_CONN_F_ONE_PACKET	0x2000		/* forward only one packet */
-
-/* Initial bits allowed in backup server */
-#define IP_VS_CONN_F_BACKUP_MASK (IP_VS_CONN_F_FWD_MASK | \
-				  IP_VS_CONN_F_NOOUTPUT | \
-				  IP_VS_CONN_F_INACTIVE | \
-				  IP_VS_CONN_F_SEQ_MASK | \
-				  IP_VS_CONN_F_NO_CPORT | \
-				  IP_VS_CONN_F_TEMPLATE \
-				 )
-
-/* Bits allowed to update in backup server */
-#define IP_VS_CONN_F_BACKUP_UPD_MASK (IP_VS_CONN_F_INACTIVE | \
-				      IP_VS_CONN_F_SEQ_MASK)
-
-/* Flags that are not sent to backup server start from bit 16 */
-#define IP_VS_CONN_F_NFCT	(1 << 16)	/* use netfilter conntrack */
-
-/* Connection flags from destination that can be changed by user space */
-#define IP_VS_CONN_F_DEST_MASK (IP_VS_CONN_F_FWD_MASK | \
-				IP_VS_CONN_F_ONE_PACKET | \
-				IP_VS_CONN_F_NFCT | \
-				0)
-
-#define IP_VS_SCHEDNAME_MAXLEN	16
-#define IP_VS_PENAME_MAXLEN	16
-#define IP_VS_IFNAME_MAXLEN	16
-
-#define IP_VS_PEDATA_MAXLEN     255
-
-/*
- *	The struct ip_vs_service_user and struct ip_vs_dest_user are
- *	used to set IPVS rules through setsockopt.
- */
-struct ip_vs_service_user {
-	/* virtual service addresses */
-	__u16		protocol;
-	__be32			addr;		/* virtual ip address */
-	__be16			port;
-	__u32		fwmark;		/* firwall mark of service */
-
-	/* virtual service options */
-	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
-	unsigned int		flags;		/* virtual service flags */
-	unsigned int		timeout;	/* persistent timeout in sec */
-	__be32			netmask;	/* persistent netmask */
-};
-
-
-struct ip_vs_dest_user {
-	/* destination server address */
-	__be32			addr;
-	__be16			port;
-
-	/* real server options */
-	unsigned int		conn_flags;	/* connection flags */
-	int			weight;		/* destination weight */
-
-	/* thresholds for active connections */
-	__u32		u_threshold;	/* upper threshold */
-	__u32		l_threshold;	/* lower threshold */
-};
-
-
-/*
- *	IPVS statistics object (for user space)
- */
-struct ip_vs_stats_user {
-	__u32                   conns;          /* connections scheduled */
-	__u32                   inpkts;         /* incoming packets */
-	__u32                   outpkts;        /* outgoing packets */
-	__u64                   inbytes;        /* incoming bytes */
-	__u64                   outbytes;       /* outgoing bytes */
-
-	__u32			cps;		/* current connection rate */
-	__u32			inpps;		/* current in packet rate */
-	__u32			outpps;		/* current out packet rate */
-	__u32			inbps;		/* current in byte rate */
-	__u32			outbps;		/* current out byte rate */
-};
-
-
-/* The argument to IP_VS_SO_GET_INFO */
-struct ip_vs_getinfo {
-	/* version number */
-	unsigned int		version;
-
-	/* size of connection hash table */
-	unsigned int		size;
-
-	/* number of virtual services */
-	unsigned int		num_services;
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICE */
-struct ip_vs_service_entry {
-	/* which service: user fills in these */
-	__u16		protocol;
-	__be32			addr;		/* virtual address */
-	__be16			port;
-	__u32		fwmark;		/* firwall mark of service */
-
-	/* service options */
-	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
-	unsigned int		flags;          /* virtual service flags */
-	unsigned int		timeout;	/* persistent timeout */
-	__be32			netmask;	/* persistent netmask */
-
-	/* number of real servers */
-	unsigned int		num_dests;
-
-	/* statistics */
-	struct ip_vs_stats_user stats;
-};
-
-
-struct ip_vs_dest_entry {
-	__be32			addr;		/* destination address */
-	__be16			port;
-	unsigned int		conn_flags;	/* connection flags */
-	int			weight;		/* destination weight */
-
-	__u32		u_threshold;	/* upper threshold */
-	__u32		l_threshold;	/* lower threshold */
-
-	__u32		activeconns;	/* active connections */
-	__u32		inactconns;	/* inactive connections */
-	__u32		persistconns;	/* persistent connections */
-
-	/* statistics */
-	struct ip_vs_stats_user stats;
-};
-
-
-/* The argument to IP_VS_SO_GET_DESTS */
-struct ip_vs_get_dests {
-	/* which service: user fills in these */
-	__u16		protocol;
-	__be32			addr;		/* virtual address */
-	__be16			port;
-	__u32		fwmark;		/* firwall mark of service */
-
-	/* number of real servers */
-	unsigned int		num_dests;
-
-	/* the real servers */
-	struct ip_vs_dest_entry	entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICES */
-struct ip_vs_get_services {
-	/* number of virtual services */
-	unsigned int		num_services;
-
-	/* service table */
-	struct ip_vs_service_entry entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_TIMEOUT */
-struct ip_vs_timeout_user {
-	int			tcp_timeout;
-	int			tcp_fin_timeout;
-	int			udp_timeout;
-};
-
-
-/* The argument to IP_VS_SO_GET_DAEMON */
-struct ip_vs_daemon_user {
-	/* sync daemon state (master/backup) */
-	int			state;
-
-	/* multicast interface name */
-	char			mcast_ifn[IP_VS_IFNAME_MAXLEN];
-
-	/* SyncID we belong to */
-	int			syncid;
-};
-
-/*
- *
- * IPVS Generic Netlink interface definitions
- *
- */
-
-/* Generic Netlink family info */
-
-#define IPVS_GENL_NAME		"IPVS"
-#define IPVS_GENL_VERSION	0x1
-
-struct ip_vs_flags {
-	__be32 flags;
-	__be32 mask;
-};
-
-/* Generic Netlink command attributes */
-enum {
-	IPVS_CMD_UNSPEC = 0,
-
-	IPVS_CMD_NEW_SERVICE,		/* add service */
-	IPVS_CMD_SET_SERVICE,		/* modify service */
-	IPVS_CMD_DEL_SERVICE,		/* delete service */
-	IPVS_CMD_GET_SERVICE,		/* get service info */
-
-	IPVS_CMD_NEW_DEST,		/* add destination */
-	IPVS_CMD_SET_DEST,		/* modify destination */
-	IPVS_CMD_DEL_DEST,		/* delete destination */
-	IPVS_CMD_GET_DEST,		/* get destination info */
-
-	IPVS_CMD_NEW_DAEMON,		/* start sync daemon */
-	IPVS_CMD_DEL_DAEMON,		/* stop sync daemon */
-	IPVS_CMD_GET_DAEMON,		/* get sync daemon status */
-
-	IPVS_CMD_SET_CONFIG,		/* set config settings */
-	IPVS_CMD_GET_CONFIG,		/* get config settings */
-
-	IPVS_CMD_SET_INFO,		/* only used in GET_INFO reply */
-	IPVS_CMD_GET_INFO,		/* get general IPVS info */
-
-	IPVS_CMD_ZERO,			/* zero all counters and stats */
-	IPVS_CMD_FLUSH,			/* flush services and dests */
-
-	__IPVS_CMD_MAX,
-};
-
-#define IPVS_CMD_MAX (__IPVS_CMD_MAX - 1)
-
-/* Attributes used in the first level of commands */
-enum {
-	IPVS_CMD_ATTR_UNSPEC = 0,
-	IPVS_CMD_ATTR_SERVICE,		/* nested service attribute */
-	IPVS_CMD_ATTR_DEST,		/* nested destination attribute */
-	IPVS_CMD_ATTR_DAEMON,		/* nested sync daemon attribute */
-	IPVS_CMD_ATTR_TIMEOUT_TCP,	/* TCP connection timeout */
-	IPVS_CMD_ATTR_TIMEOUT_TCP_FIN,	/* TCP FIN wait timeout */
-	IPVS_CMD_ATTR_TIMEOUT_UDP,	/* UDP timeout */
-	__IPVS_CMD_ATTR_MAX,
-};
-
-#define IPVS_CMD_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1)
-
-/*
- * Attributes used to describe a service
- *
- * Used inside nested attribute IPVS_CMD_ATTR_SERVICE
- */
-enum {
-	IPVS_SVC_ATTR_UNSPEC = 0,
-	IPVS_SVC_ATTR_AF,		/* address family */
-	IPVS_SVC_ATTR_PROTOCOL,		/* virtual service protocol */
-	IPVS_SVC_ATTR_ADDR,		/* virtual service address */
-	IPVS_SVC_ATTR_PORT,		/* virtual service port */
-	IPVS_SVC_ATTR_FWMARK,		/* firewall mark of service */
-
-	IPVS_SVC_ATTR_SCHED_NAME,	/* name of scheduler */
-	IPVS_SVC_ATTR_FLAGS,		/* virtual service flags */
-	IPVS_SVC_ATTR_TIMEOUT,		/* persistent timeout */
-	IPVS_SVC_ATTR_NETMASK,		/* persistent netmask */
-
-	IPVS_SVC_ATTR_STATS,		/* nested attribute for service stats */
-
-	IPVS_SVC_ATTR_PE_NAME,		/* name of ct retriever */
-
-	__IPVS_SVC_ATTR_MAX,
-};
-
-#define IPVS_SVC_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1)
-
-/*
- * Attributes used to describe a destination (real server)
- *
- * Used inside nested attribute IPVS_CMD_ATTR_DEST
- */
-enum {
-	IPVS_DEST_ATTR_UNSPEC = 0,
-	IPVS_DEST_ATTR_ADDR,		/* real server address */
-	IPVS_DEST_ATTR_PORT,		/* real server port */
-
-	IPVS_DEST_ATTR_FWD_METHOD,	/* forwarding method */
-	IPVS_DEST_ATTR_WEIGHT,		/* destination weight */
-
-	IPVS_DEST_ATTR_U_THRESH,	/* upper threshold */
-	IPVS_DEST_ATTR_L_THRESH,	/* lower threshold */
-
-	IPVS_DEST_ATTR_ACTIVE_CONNS,	/* active connections */
-	IPVS_DEST_ATTR_INACT_CONNS,	/* inactive connections */
-	IPVS_DEST_ATTR_PERSIST_CONNS,	/* persistent connections */
-
-	IPVS_DEST_ATTR_STATS,		/* nested attribute for dest stats */
-	__IPVS_DEST_ATTR_MAX,
-};
-
-#define IPVS_DEST_ATTR_MAX (__IPVS_DEST_ATTR_MAX - 1)
-
-/*
- * Attributes describing a sync daemon
- *
- * Used inside nested attribute IPVS_CMD_ATTR_DAEMON
- */
-enum {
-	IPVS_DAEMON_ATTR_UNSPEC = 0,
-	IPVS_DAEMON_ATTR_STATE,		/* sync daemon state (master/backup) */
-	IPVS_DAEMON_ATTR_MCAST_IFN,	/* multicast interface name */
-	IPVS_DAEMON_ATTR_SYNC_ID,	/* SyncID we belong to */
-	__IPVS_DAEMON_ATTR_MAX,
-};
-
-#define IPVS_DAEMON_ATTR_MAX (__IPVS_DAEMON_ATTR_MAX - 1)
-
-/*
- * Attributes used to describe service or destination entry statistics
- *
- * Used inside nested attributes IPVS_SVC_ATTR_STATS and IPVS_DEST_ATTR_STATS
- */
-enum {
-	IPVS_STATS_ATTR_UNSPEC = 0,
-	IPVS_STATS_ATTR_CONNS,		/* connections scheduled */
-	IPVS_STATS_ATTR_INPKTS,		/* incoming packets */
-	IPVS_STATS_ATTR_OUTPKTS,	/* outgoing packets */
-	IPVS_STATS_ATTR_INBYTES,	/* incoming bytes */
-	IPVS_STATS_ATTR_OUTBYTES,	/* outgoing bytes */
-
-	IPVS_STATS_ATTR_CPS,		/* current connection rate */
-	IPVS_STATS_ATTR_INPPS,		/* current in packet rate */
-	IPVS_STATS_ATTR_OUTPPS,		/* current out packet rate */
-	IPVS_STATS_ATTR_INBPS,		/* current in byte rate */
-	IPVS_STATS_ATTR_OUTBPS,		/* current out byte rate */
-	__IPVS_STATS_ATTR_MAX,
-};
-
-#define IPVS_STATS_ATTR_MAX (__IPVS_STATS_ATTR_MAX - 1)
-
-/* Attributes used in response to IPVS_CMD_GET_INFO command */
-enum {
-	IPVS_INFO_ATTR_UNSPEC = 0,
-	IPVS_INFO_ATTR_VERSION,		/* IPVS version number */
-	IPVS_INFO_ATTR_CONN_TAB_SIZE,	/* size of connection hash table */
-	__IPVS_INFO_ATTR_MAX,
-};
-
-#define IPVS_INFO_ATTR_MAX (__IPVS_INFO_ATTR_MAX - 1)
-
-#endif	/* _IP_VS_H */
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
index ca833fdc3138..8d861b2651f7 100644
--- a/include/linux/ipc.h
+++ b/include/linux/ipc.h
@@ -1,85 +1,9 @@
 #ifndef _LINUX_IPC_H
 #define _LINUX_IPC_H
 
-#include <linux/types.h>
-
-#define IPC_PRIVATE ((__kernel_key_t) 0)  
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct ipc_perm
-{
-	__kernel_key_t	key;
-	__kernel_uid_t	uid;
-	__kernel_gid_t	gid;
-	__kernel_uid_t	cuid;
-	__kernel_gid_t	cgid;
-	__kernel_mode_t	mode; 
-	unsigned short	seq;
-};
-
-/* Include the definition of ipc64_perm */
-#include <asm/ipcbuf.h>
-
-/* resource get request flags */
-#define IPC_CREAT  00001000   /* create if key is nonexistent */
-#define IPC_EXCL   00002000   /* fail if key exists */
-#define IPC_NOWAIT 00004000   /* return error on wait */
-
-/* these fields are used by the DIPC package so the kernel as standard
-   should avoid using them if possible */
-   
-#define IPC_DIPC 00010000  /* make it distributed */
-#define IPC_OWN  00020000  /* this machine is the DIPC owner */
-
-/* 
- * Control commands used with semctl, msgctl and shmctl 
- * see also specific commands in sem.h, msg.h and shm.h
- */
-#define IPC_RMID 0     /* remove resource */
-#define IPC_SET  1     /* set ipc_perm options */
-#define IPC_STAT 2     /* get ipc_perm options */
-#define IPC_INFO 3     /* see ipcs */
-
-/*
- * Version flags for semctl, msgctl, and shmctl commands
- * These are passed as bitflags or-ed with the actual command
- */
-#define IPC_OLD 0	/* Old version (no 32-bit UID support on many
-			   architectures) */
-#define IPC_64  0x0100  /* New version (support 32-bit UIDs, bigger
-			   message sizes, etc. */
-
-/*
- * These are used to wrap system calls.
- *
- * See architecture code for ugly details..
- */
-struct ipc_kludge {
-	struct msgbuf __user *msgp;
-	long msgtyp;
-};
-
-#define SEMOP		 1
-#define SEMGET		 2
-#define SEMCTL		 3
-#define SEMTIMEDOP	 4
-#define MSGSND		11
-#define MSGRCV		12
-#define MSGGET		13
-#define MSGCTL		14
-#define SHMAT		21
-#define SHMDT		22
-#define SHMGET		23
-#define SHMCTL		24
-
-/* Used by the DIPC package, try and avoid reusing it */
-#define DIPC            25
-
-#define IPCCALL(version,op)	((version)<<16 | (op))
-
-#ifdef __KERNEL__
 #include <linux/spinlock.h>
 #include <linux/uidgid.h>
+#include <uapi/linux/ipc.h>
 
 #define IPCMNI 32768  /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
 
@@ -99,6 +23,4 @@ struct kern_ipc_perm
 	void		*security;
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_IPC_H */
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index 48dcba9b2065..1487e7906bbd 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -30,191 +30,11 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-
 #ifndef __LINUX_IPMI_H
 #define __LINUX_IPMI_H
 
-#include <linux/ipmi_msgdefs.h>
-#include <linux/compiler.h>
-
-/*
- * This file describes an interface to an IPMI driver.  You have to
- * have a fairly good understanding of IPMI to use this, so go read
- * the specs first before actually trying to do anything.
- *
- * With that said, this driver provides a multi-user interface to the
- * IPMI driver, and it allows multiple IPMI physical interfaces below
- * the driver.  The physical interfaces bind as a lower layer on the
- * driver.  They appear as interfaces to the application using this
- * interface.
- *
- * Multi-user means that multiple applications may use the driver,
- * send commands, receive responses, etc.  The driver keeps track of
- * commands the user sends and tracks the responses.  The responses
- * will go back to the application that send the command.  If the
- * response doesn't come back in time, the driver will return a
- * timeout error response to the application.  Asynchronous events
- * from the BMC event queue will go to all users bound to the driver.
- * The incoming event queue in the BMC will automatically be flushed
- * if it becomes full and it is queried once a second to see if
- * anything is in it.  Incoming commands to the driver will get
- * delivered as commands.
- *
- * This driver provides two main interfaces: one for in-kernel
- * applications and another for userland applications.  The
- * capabilities are basically the same for both interface, although
- * the interfaces are somewhat different.  The stuff in the
- * #ifdef __KERNEL__ below is the in-kernel interface.  The userland
- * interface is defined later in the file.  */
-
-
-
-/*
- * This is an overlay for all the address types, so it's easy to
- * determine the actual address type.  This is kind of like addresses
- * work for sockets.
- */
-#define IPMI_MAX_ADDR_SIZE 32
-struct ipmi_addr {
-	 /* Try to take these from the "Channel Medium Type" table
-	    in section 6.5 of the IPMI 1.5 manual. */
-	int   addr_type;
-	short channel;
-	char  data[IPMI_MAX_ADDR_SIZE];
-};
-
-/*
- * When the address is not used, the type will be set to this value.
- * The channel is the BMC's channel number for the channel (usually
- * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
- */
-#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE	0x0c
-struct ipmi_system_interface_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char lun;
-};
-
-/* An IPMB Address. */
-#define IPMI_IPMB_ADDR_TYPE		0x01
-/* Used for broadcast get device id as described in section 17.9 of the
-   IPMI 1.5 manual. */
-#define IPMI_IPMB_BROADCAST_ADDR_TYPE	0x41
-struct ipmi_ipmb_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char slave_addr;
-	unsigned char lun;
-};
-
-/*
- * A LAN Address.  This is an address to/from a LAN interface bridged
- * by the BMC, not an address actually out on the LAN.
- *
- * A conscious decision was made here to deviate slightly from the IPMI
- * spec.  We do not use rqSWID and rsSWID like it shows in the
- * message.  Instead, we use remote_SWID and local_SWID.  This means
- * that any message (a request or response) from another device will
- * always have exactly the same address.  If you didn't do this,
- * requests and responses from the same device would have different
- * addresses, and that's not too cool.
- *
- * In this address, the remote_SWID is always the SWID the remote
- * message came from, or the SWID we are sending the message to.
- * local_SWID is always our SWID.  Note that having our SWID in the
- * message is a little weird, but this is required.
- */
-#define IPMI_LAN_ADDR_TYPE		0x04
-struct ipmi_lan_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char privilege;
-	unsigned char session_handle;
-	unsigned char remote_SWID;
-	unsigned char local_SWID;
-	unsigned char lun;
-};
-
-
-/*
- * Channel for talking directly with the BMC.  When using this
- * channel, This is for the system interface address type only.  FIXME
- * - is this right, or should we use -1?
- */
-#define IPMI_BMC_CHANNEL  0xf
-#define IPMI_NUM_CHANNELS 0x10
-
-/*
- * Used to signify an "all channel" bitmask.  This is more than the
- * actual number of channels because this is used in userland and
- * will cover us if the number of channels is extended.
- */
-#define IPMI_CHAN_ALL     (~0)
-
-
-/*
- * A raw IPMI message without any addressing.  This covers both
- * commands and responses.  The completion code is always the first
- * byte of data in the response (as the spec shows the messages laid
- * out).
- */
-struct ipmi_msg {
-	unsigned char  netfn;
-	unsigned char  cmd;
-	unsigned short data_len;
-	unsigned char  __user *data;
-};
-
-struct kernel_ipmi_msg {
-	unsigned char  netfn;
-	unsigned char  cmd;
-	unsigned short data_len;
-	unsigned char  *data;
-};
-
-/*
- * Various defines that are useful for IPMI applications.
- */
-#define IPMI_INVALID_CMD_COMPLETION_CODE	0xC1
-#define IPMI_TIMEOUT_COMPLETION_CODE		0xC3
-#define IPMI_UNKNOWN_ERR_COMPLETION_CODE	0xff
-
+#include <uapi/linux/ipmi.h>
 
-/*
- * Receive types for messages coming from the receive interface.  This
- * is used for the receive in-kernel interface and in the receive
- * IOCTL.
- *
- * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
- * it allows you to get the message results when you send a response
- * message.
- */
-#define IPMI_RESPONSE_RECV_TYPE		1 /* A response to a command */
-#define IPMI_ASYNC_EVENT_RECV_TYPE	2 /* Something from the event queue */
-#define IPMI_CMD_RECV_TYPE		3 /* A command from somewhere else */
-#define IPMI_RESPONSE_RESPONSE_TYPE	4 /* The response for
-					      a sent response, giving any
-					      error status for sending the
-					      response.  When you send a
-					      response message, this will
-					      be returned. */
-#define IPMI_OEM_RECV_TYPE		5 /* The response for OEM Channels */
-
-/* Note that async events and received commands do not have a completion
-   code as the first byte of the incoming data, unlike a response. */
-
-
-/*
- * Modes for ipmi_set_maint_mode() and the userland IOCTL.  The AUTO
- * setting is the default and means it will be set on certain
- * commands.  Hard setting it on and off will override automatic
- * operation.
- */
-#define IPMI_MAINTENANCE_MODE_AUTO	0
-#define IPMI_MAINTENANCE_MODE_OFF	1
-#define IPMI_MAINTENANCE_MODE_ON	2
-
-#ifdef __KERNEL__
 
 /*
  * The in-kernel interface.
@@ -493,244 +313,4 @@ struct ipmi_smi_info {
 /* This is to get the private info of ipmi_smi_t */
 extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data);
 
-#endif /* __KERNEL__ */
-
-
-/*
- * The userland interface
- */
-
-/*
- * The userland interface for the IPMI driver is a standard character
- * device, with each instance of an interface registered as a minor
- * number under the major character device.
- *
- * The read and write calls do not work, to get messages in and out
- * requires ioctl calls because of the complexity of the data.  select
- * and poll do work, so you can wait for input using the file
- * descriptor, you just can use read to get it.
- *
- * In general, you send a command down to the interface and receive
- * responses back.  You can use the msgid value to correlate commands
- * and responses, the driver will take care of figuring out which
- * incoming messages are for which command and find the proper msgid
- * value to report.  You will only receive reponses for commands you
- * send.  Asynchronous events, however, go to all open users, so you
- * must be ready to handle these (or ignore them if you don't care).
- *
- * The address type depends upon the channel type.  When talking
- * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
- * (IPMI_UNUSED_ADDR_TYPE).  When talking to an IPMB channel, you must
- * supply a valid IPMB address with the addr_type set properly.
- *
- * When talking to normal channels, the driver takes care of the
- * details of formatting and sending messages on that channel.  You do
- * not, for instance, have to format a send command, you just send
- * whatever command you want to the channel, the driver will create
- * the send command, automatically issue receive command and get even
- * commands, and pass those up to the proper user.
- */
-
-
-/* The magic IOCTL value for this interface. */
-#define IPMI_IOC_MAGIC 'i'
-
-
-/* Messages sent to the interface are this format. */
-struct ipmi_req {
-	unsigned char __user *addr; /* Address to send the message to. */
-	unsigned int  addr_len;
-
-	long    msgid; /* The sequence number for the message.  This
-			  exact value will be reported back in the
-			  response to this request if it is a command.
-			  If it is a response, this will be used as
-			  the sequence value for the response.  */
-
-	struct ipmi_msg msg;
-};
-/*
- * Send a message to the interfaces.  error values are:
- *   - EFAULT - an address supplied was invalid.
- *   - EINVAL - The address supplied was not valid, or the command
- *              was not allowed.
- *   - EMSGSIZE - The message to was too large.
- *   - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND		_IOR(IPMI_IOC_MAGIC, 13,	\
-					     struct ipmi_req)
-
-/* Messages sent to the interface with timing parameters are this
-   format. */
-struct ipmi_req_settime {
-	struct ipmi_req req;
-
-	/* See ipmi_request_settime() above for details on these
-	   values. */
-	int          retries;
-	unsigned int retry_time_ms;
-};
-/*
- * Send a message to the interfaces with timing parameters.  error values
- * are:
- *   - EFAULT - an address supplied was invalid.
- *   - EINVAL - The address supplied was not valid, or the command
- *              was not allowed.
- *   - EMSGSIZE - The message to was too large.
- *   - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND_SETTIME	_IOR(IPMI_IOC_MAGIC, 21,	\
-					     struct ipmi_req_settime)
-
-/* Messages received from the interface are this format. */
-struct ipmi_recv {
-	int     recv_type; /* Is this a command, response or an
-			      asyncronous event. */
-
-	unsigned char __user *addr;    /* Address the message was from is put
-				   here.  The caller must supply the
-				   memory. */
-	unsigned int  addr_len; /* The size of the address buffer.
-				   The caller supplies the full buffer
-				   length, this value is updated to
-				   the actual message length when the
-				   message is received. */
-
-	long    msgid; /* The sequence number specified in the request
-			  if this is a response.  If this is a command,
-			  this will be the sequence number from the
-			  command. */
-
-	struct ipmi_msg msg; /* The data field must point to a buffer.
-				The data_size field must be set to the
-				size of the message buffer.  The
-				caller supplies the full buffer
-				length, this value is updated to the
-				actual message length when the message
-				is received. */
-};
-
-/*
- * Receive a message.  error values:
- *  - EAGAIN - no messages in the queue.
- *  - EFAULT - an address supplied was invalid.
- *  - EINVAL - The address supplied was not valid.
- *  - EMSGSIZE - The message to was too large to fit into the message buffer,
- *               the message will be left in the buffer. */
-#define IPMICTL_RECEIVE_MSG		_IOWR(IPMI_IOC_MAGIC, 12,	\
-					      struct ipmi_recv)
-
-/*
- * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
- * will truncate the contents instead of leaving the data in the
- * buffer.
- */
-#define IPMICTL_RECEIVE_MSG_TRUNC	_IOWR(IPMI_IOC_MAGIC, 11,	\
-					      struct ipmi_recv)
-
-/* Register to get commands from other entities on this interface. */
-struct ipmi_cmdspec {
-	unsigned char netfn;
-	unsigned char cmd;
-};
-
-/*
- * Register to receive a specific command.  error values:
- *   - EFAULT - an address supplied was invalid.
- *   - EBUSY - The netfn/cmd supplied was already in use.
- *   - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
-					     struct ipmi_cmdspec)
-/*
- * Unregister a regsitered command.  error values:
- *  - EFAULT - an address supplied was invalid.
- *  - ENOENT - The netfn/cmd was not found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 15,	\
-					     struct ipmi_cmdspec)
-
-/*
- * Register to get commands from other entities on specific channels.
- * This way, you can only listen on specific channels, or have messages
- * from some channels go to one place and other channels to someplace
- * else.  The chans field is a bitmask, (1 << channel) for each channel.
- * It may be IPMI_CHAN_ALL for all channels.
- */
-struct ipmi_cmdspec_chans {
-	unsigned int netfn;
-	unsigned int cmd;
-	unsigned int chans;
-};
-
-/*
- * Register to receive a specific command on specific channels.  error values:
- *   - EFAULT - an address supplied was invalid.
- *   - EBUSY - One of the netfn/cmd/chans supplied was already in use.
- *   - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD_CHANS	_IOR(IPMI_IOC_MAGIC, 28,	\
-					     struct ipmi_cmdspec_chans)
-/*
- * Unregister some netfn/cmd/chans.  error values:
- *  - EFAULT - an address supplied was invalid.
- *  - ENOENT - None of the netfn/cmd/chans were found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29,	\
-					     struct ipmi_cmdspec_chans)
-
-/*
- * Set whether this interface receives events.  Note that the first
- * user registered for events will get all pending events for the
- * interface.  error values:
- *  - EFAULT - an address supplied was invalid.
- */
-#define IPMICTL_SET_GETS_EVENTS_CMD	_IOR(IPMI_IOC_MAGIC, 16, int)
-
-/*
- * Set and get the slave address and LUN that we will use for our
- * source messages.  Note that this affects the interface, not just
- * this user, so it will affect all users of this interface.  This is
- * so some initialization code can come in and do the OEM-specific
- * things it takes to determine your address (if not the BMC) and set
- * it for everyone else.  You should probably leave the LUN alone.
- */
-struct ipmi_channel_lun_address_set {
-	unsigned short channel;
-	unsigned char  value;
-};
-#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
-	_IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
-	_IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
-#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
-	_IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
-	_IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
-/* Legacy interfaces, these only set IPMB 0. */
-#define IPMICTL_SET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 17, unsigned int)
-#define IPMICTL_GET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 18, unsigned int)
-#define IPMICTL_SET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 19, unsigned int)
-#define IPMICTL_GET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 20, unsigned int)
-
-/*
- * Get/set the default timing values for an interface.  You shouldn't
- * generally mess with these.
- */
-struct ipmi_timing_parms {
-	int          retries;
-	unsigned int retry_time_ms;
-};
-#define IPMICTL_SET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 22, \
-					     struct ipmi_timing_parms)
-#define IPMICTL_GET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 23, \
-					     struct ipmi_timing_parms)
-
-/*
- * Set the maintenance mode.  See ipmi_set_maintenance_mode() above
- * for a description of what this does.
- */
-#define IPMICTL_GET_MAINTENANCE_MODE_CMD	_IOR(IPMI_IOC_MAGIC, 30, int)
-#define IPMICTL_SET_MAINTENANCE_MODE_CMD	_IOW(IPMI_IOC_MAGIC, 31, int)
-
 #endif /* __LINUX_IPMI_H */
diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h
deleted file mode 100644
index df97e6e31e87..000000000000
--- a/include/linux/ipmi_msgdefs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * ipmi_smi.h
- *
- * MontaVista IPMI system management interface
- *
- * Author: MontaVista Software, Inc.
- *         Corey Minyard <minyard@mvista.com>
- *         source@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_IPMI_MSGDEFS_H
-#define __LINUX_IPMI_MSGDEFS_H
-
-/* Various definitions for IPMI messages used by almost everything in
-   the IPMI stack. */
-
-/* NetFNs and commands used inside the IPMI stack. */
-
-#define IPMI_NETFN_SENSOR_EVENT_REQUEST		0x04
-#define IPMI_NETFN_SENSOR_EVENT_RESPONSE	0x05
-#define IPMI_GET_EVENT_RECEIVER_CMD	0x01
-
-#define IPMI_NETFN_APP_REQUEST			0x06
-#define IPMI_NETFN_APP_RESPONSE			0x07
-#define IPMI_GET_DEVICE_ID_CMD		0x01
-#define IPMI_COLD_RESET_CMD		0x02
-#define IPMI_WARM_RESET_CMD		0x03
-#define IPMI_CLEAR_MSG_FLAGS_CMD	0x30
-#define IPMI_GET_DEVICE_GUID_CMD	0x08
-#define IPMI_GET_MSG_FLAGS_CMD		0x31
-#define IPMI_SEND_MSG_CMD		0x34
-#define IPMI_GET_MSG_CMD		0x33
-#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD	0x2e
-#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD	0x2f
-#define IPMI_READ_EVENT_MSG_BUFFER_CMD	0x35
-#define IPMI_GET_CHANNEL_INFO_CMD	0x42
-
-/* Bit for BMC global enables. */
-#define IPMI_BMC_RCV_MSG_INTR     0x01
-#define IPMI_BMC_EVT_MSG_INTR     0x02
-#define IPMI_BMC_EVT_MSG_BUFF     0x04
-#define IPMI_BMC_SYS_LOG          0x08
-
-#define IPMI_NETFN_STORAGE_REQUEST		0x0a
-#define IPMI_NETFN_STORAGE_RESPONSE		0x0b
-#define IPMI_ADD_SEL_ENTRY_CMD		0x44
-
-#define IPMI_NETFN_FIRMWARE_REQUEST		0x08
-#define IPMI_NETFN_FIRMWARE_RESPONSE		0x09
-
-/* The default slave address */
-#define IPMI_BMC_SLAVE_ADDR	0x20
-
-/* The BT interface on high-end HP systems supports up to 255 bytes in
- * one transfer.  Its "virtual" BMC supports some commands that are longer
- * than 128 bytes.  Use the full 256, plus NetFn/LUN, Cmd, cCode, plus
- * some overhead; it's not worth the effort to dynamically size this based
- * on the results of the "Get BT Capabilities" command. */
-#define IPMI_MAX_MSG_LENGTH	272	/* multiple of 16 */
-
-#define IPMI_CC_NO_ERROR		0x00
-#define IPMI_NODE_BUSY_ERR		0xc0
-#define IPMI_INVALID_COMMAND_ERR	0xc1
-#define IPMI_TIMEOUT_ERR		0xc3
-#define IPMI_ERR_MSG_TRUNCATED		0xc6
-#define IPMI_REQ_LEN_INVALID_ERR	0xc7
-#define IPMI_REQ_LEN_EXCEEDED_ERR	0xc8
-#define IPMI_NOT_IN_MY_STATE_ERR	0xd5	/* IPMI 2.0 */
-#define IPMI_LOST_ARBITRATION_ERR	0x81
-#define IPMI_BUS_ERR			0x82
-#define IPMI_NAK_ON_WRITE_ERR		0x83
-#define IPMI_ERR_UNSPECIFIED		0xff
-
-#define IPMI_CHANNEL_PROTOCOL_IPMB	1
-#define IPMI_CHANNEL_PROTOCOL_ICMB	2
-#define IPMI_CHANNEL_PROTOCOL_SMBUS	4
-#define IPMI_CHANNEL_PROTOCOL_KCS	5
-#define IPMI_CHANNEL_PROTOCOL_SMIC	6
-#define IPMI_CHANNEL_PROTOCOL_BT10	7
-#define IPMI_CHANNEL_PROTOCOL_BT15	8
-#define IPMI_CHANNEL_PROTOCOL_TMODE	9
-
-#define IPMI_CHANNEL_MEDIUM_IPMB	1
-#define IPMI_CHANNEL_MEDIUM_ICMB10	2
-#define IPMI_CHANNEL_MEDIUM_ICMB09	3
-#define IPMI_CHANNEL_MEDIUM_8023LAN	4
-#define IPMI_CHANNEL_MEDIUM_ASYNC	5
-#define IPMI_CHANNEL_MEDIUM_OTHER_LAN	6
-#define IPMI_CHANNEL_MEDIUM_PCI_SMBUS	7
-#define IPMI_CHANNEL_MEDIUM_SMBUS1	8
-#define IPMI_CHANNEL_MEDIUM_SMBUS2	9
-#define IPMI_CHANNEL_MEDIUM_USB1	10
-#define IPMI_CHANNEL_MEDIUM_USB2	11
-#define IPMI_CHANNEL_MEDIUM_SYSINTF	12
-#define IPMI_CHANNEL_MEDIUM_OEM_MIN	0x60
-#define IPMI_CHANNEL_MEDIUM_OEM_MAX	0x7f
-
-#endif /* __LINUX_IPMI_MSGDEFS_H */
diff --git a/include/linux/ipsec.h b/include/linux/ipsec.h
deleted file mode 100644
index d17a6302a0e9..000000000000
--- a/include/linux/ipsec.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef _LINUX_IPSEC_H
-#define _LINUX_IPSEC_H
-
-/* The definitions, required to talk to KAME racoon IKE. */
-
-#include <linux/pfkeyv2.h>
-
-#define IPSEC_PORT_ANY		0
-#define IPSEC_ULPROTO_ANY	255
-#define IPSEC_PROTO_ANY		255
-
-enum {
-	IPSEC_MODE_ANY		= 0,	/* We do not support this for SA */
-	IPSEC_MODE_TRANSPORT	= 1,
-	IPSEC_MODE_TUNNEL	= 2,
-	IPSEC_MODE_BEET         = 3
-};
-
-enum {
-	IPSEC_DIR_ANY		= 0,
-	IPSEC_DIR_INBOUND	= 1,
-	IPSEC_DIR_OUTBOUND	= 2,
-	IPSEC_DIR_FWD		= 3,	/* It is our own */
-	IPSEC_DIR_MAX		= 4,
-	IPSEC_DIR_INVALID	= 5
-};
-
-enum {
-	IPSEC_POLICY_DISCARD	= 0,
-	IPSEC_POLICY_NONE	= 1,
-	IPSEC_POLICY_IPSEC	= 2,
-	IPSEC_POLICY_ENTRUST	= 3,
-	IPSEC_POLICY_BYPASS	= 4
-};
-
-enum {
-	IPSEC_LEVEL_DEFAULT	= 0,
-	IPSEC_LEVEL_USE		= 1,
-	IPSEC_LEVEL_REQUIRE	= 2,
-	IPSEC_LEVEL_UNIQUE	= 3
-};
-
-#define IPSEC_MANUAL_REQID_MAX	0x3fff
-
-#define IPSEC_REPLAYWSIZE  32
-
-#endif	/* _LINUX_IPSEC_H */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 0b94e91ed685..bcba48a97868 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -1,134 +1,9 @@
 #ifndef _IPV6_H
 #define _IPV6_H
 
-#include <linux/types.h>
-#include <linux/in6.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/ipv6.h>
 
-/* The latest drafts declared increase in minimal mtu up to 1280. */
-
-#define IPV6_MIN_MTU	1280
-
-/*
- *	Advanced API
- *	source interface/address selection, source routing, etc...
- *	*under construction*
- */
-
-
-struct in6_pktinfo {
-	struct in6_addr	ipi6_addr;
-	int		ipi6_ifindex;
-};
-
-struct ip6_mtuinfo {
-	struct sockaddr_in6	ip6m_addr;
-	__u32			ip6m_mtu;
-};
-
-struct in6_ifreq {
-	struct in6_addr	ifr6_addr;
-	__u32		ifr6_prefixlen;
-	int		ifr6_ifindex; 
-};
-
-#define IPV6_SRCRT_STRICT	0x01	/* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_0	0	/* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_2	2	/* IPv6 type 2 Routing Header	*/
-
-/*
- *	routing header
- */
-struct ipv6_rt_hdr {
-	__u8		nexthdr;
-	__u8		hdrlen;
-	__u8		type;
-	__u8		segments_left;
-
-	/*
-	 *	type specific data
-	 *	variable length field
-	 */
-};
-
-
-struct ipv6_opt_hdr {
-	__u8 		nexthdr;
-	__u8 		hdrlen;
-	/* 
-	 * TLV encoded option data follows.
-	 */
-} __attribute__((packed));	/* required for some archs */
-
-#define ipv6_destopt_hdr ipv6_opt_hdr
-#define ipv6_hopopt_hdr  ipv6_opt_hdr
-
-#ifdef __KERNEL__
 #define ipv6_optlen(p)  (((p)->hdrlen+1) << 3)
-#endif
-
-/*
- *	routing header type 0 (used in cmsghdr struct)
- */
-
-struct rt0_hdr {
-	struct ipv6_rt_hdr	rt_hdr;
-	__u32			reserved;
-	struct in6_addr		addr[0];
-
-#define rt0_type		rt_hdr.type
-};
-
-/*
- *	routing header type 2
- */
-
-struct rt2_hdr {
-	struct ipv6_rt_hdr	rt_hdr;
-	__u32			reserved;
-	struct in6_addr		addr;
-
-#define rt2_type		rt_hdr.type
-};
-
-/*
- *	home address option in destination options header
- */
-
-struct ipv6_destopt_hao {
-	__u8			type;
-	__u8			length;
-	struct in6_addr		addr;
-} __attribute__((packed));
-
-/*
- *	IPv6 fixed header
- *
- *	BEWARE, it is incorrect. The first 4 bits of flow_lbl
- *	are glued to priority now, forming "class".
- */
-
-struct ipv6hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8			priority:4,
-				version:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8			version:4,
-				priority:4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8			flow_lbl[3];
-
-	__be16			payload_len;
-	__u8			nexthdr;
-	__u8			hop_limit;
-
-	struct	in6_addr	saddr;
-	struct	in6_addr	daddr;
-};
-
-#ifdef __KERNEL__
 /*
  * This structure contains configuration options per IPv6 link.
  */
@@ -180,43 +55,6 @@ struct ipv6_params {
 	__s32 autoconf;
 };
 extern struct ipv6_params ipv6_defaults;
-#endif
-
-/* index values for the variables in ipv6_devconf */
-enum {
-	DEVCONF_FORWARDING = 0,
-	DEVCONF_HOPLIMIT,
-	DEVCONF_MTU6,
-	DEVCONF_ACCEPT_RA,
-	DEVCONF_ACCEPT_REDIRECTS,
-	DEVCONF_AUTOCONF,
-	DEVCONF_DAD_TRANSMITS,
-	DEVCONF_RTR_SOLICITS,
-	DEVCONF_RTR_SOLICIT_INTERVAL,
-	DEVCONF_RTR_SOLICIT_DELAY,
-	DEVCONF_USE_TEMPADDR,
-	DEVCONF_TEMP_VALID_LFT,
-	DEVCONF_TEMP_PREFERED_LFT,
-	DEVCONF_REGEN_MAX_RETRY,
-	DEVCONF_MAX_DESYNC_FACTOR,
-	DEVCONF_MAX_ADDRESSES,
-	DEVCONF_FORCE_MLD_VERSION,
-	DEVCONF_ACCEPT_RA_DEFRTR,
-	DEVCONF_ACCEPT_RA_PINFO,
-	DEVCONF_ACCEPT_RA_RTR_PREF,
-	DEVCONF_RTR_PROBE_INTERVAL,
-	DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
-	DEVCONF_PROXY_NDP,
-	DEVCONF_OPTIMISTIC_DAD,
-	DEVCONF_ACCEPT_SOURCE_ROUTE,
-	DEVCONF_MC_FORWARDING,
-	DEVCONF_DISABLE_IPV6,
-	DEVCONF_ACCEPT_DAD,
-	DEVCONF_FORCE_TLLAO,
-	DEVCONF_MAX
-};
-
-#ifdef __KERNEL__
 #include <linux/icmpv6.h>
 #include <linux/tcp.h>
 #include <linux/udp.h>
@@ -541,6 +379,4 @@ static inline struct raw6_sock *raw6_sk(const struct sock *sk)
 	 (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr))) && \
 	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
 
-#endif /* __KERNEL__ */
-
 #endif /* _IPV6_H */
diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h
index 1e7d8af2defe..25b5f1f5e780 100644
--- a/include/linux/ipv6_route.h
+++ b/include/linux/ipv6_route.h
@@ -9,54 +9,11 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IPV6_ROUTE_H
 #define _LINUX_IPV6_ROUTE_H
 
-#include <linux/types.h>
-
-#define RTF_DEFAULT	0x00010000	/* default - learned via ND	*/
-#define RTF_ALLONLINK	0x00020000	/* (deprecated and will be removed)
-					   fallback, no routers on link */
-#define RTF_ADDRCONF	0x00040000	/* addrconf route - RA		*/
-#define RTF_PREFIX_RT	0x00080000	/* A prefix only route - RA	*/
-#define RTF_ANYCAST	0x00100000	/* Anycast			*/
-
-#define RTF_NONEXTHOP	0x00200000	/* route with no nexthop	*/
-#define RTF_EXPIRES	0x00400000
-
-#define RTF_ROUTEINFO	0x00800000	/* route information - RA	*/
-
-#define RTF_CACHE	0x01000000	/* cache entry			*/
-#define RTF_FLOW	0x02000000	/* flow significant route	*/
-#define RTF_POLICY	0x04000000	/* policy route			*/
-
-#define RTF_PREF(pref)	((pref) << 27)
-#define RTF_PREF_MASK	0x18000000
+#include <uapi/linux/ipv6_route.h>
 
-#define RTF_LOCAL	0x80000000
-
-#ifdef __KERNEL__
 #define IPV6_EXTRACT_PREF(flag)	(((flag) & RTF_PREF_MASK) >> 27)
 #define IPV6_DECODE_PREF(pref)	((pref) ^ 2)	/* 1:low,2:med,3:high */
 #endif
-
-struct in6_rtmsg {
-	struct in6_addr		rtmsg_dst;
-	struct in6_addr		rtmsg_src;
-	struct in6_addr		rtmsg_gateway;
-	__u32			rtmsg_type;
-	__u16			rtmsg_dst_len;
-	__u16			rtmsg_src_len;
-	__u32			rtmsg_metric;
-	unsigned long		rtmsg_info;
-        __u32			rtmsg_flags;
-	int			rtmsg_ifindex;
-};
-
-#define RTMSG_NEWDEVICE		0x11
-#define RTMSG_DELDEVICE		0x12
-#define RTMSG_NEWROUTE		0x21
-#define RTMSG_DELROUTE		0x22
-
-#endif
diff --git a/include/linux/ipx.h b/include/linux/ipx.h
deleted file mode 100644
index 3d48014cdd71..000000000000
--- a/include/linux/ipx.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef _IPX_H_
-#define _IPX_H_
-#include <linux/types.h>
-#include <linux/sockios.h>
-#include <linux/socket.h>
-#define IPX_NODE_LEN	6
-#define IPX_MTU		576
-
-struct sockaddr_ipx {
-	__kernel_sa_family_t sipx_family;
-	__be16		sipx_port;
-	__be32		sipx_network;
-	unsigned char 	sipx_node[IPX_NODE_LEN];
-	__u8		sipx_type;
-	unsigned char	sipx_zero;	/* 16 byte fill */
-};
-
-/*
- * So we can fit the extra info for SIOCSIFADDR into the address nicely
- */
-#define sipx_special	sipx_port
-#define sipx_action	sipx_zero
-#define IPX_DLTITF	0
-#define IPX_CRTITF	1
-
-struct ipx_route_definition {
-	__be32        ipx_network;
-	__be32        ipx_router_network;
-	unsigned char ipx_router_node[IPX_NODE_LEN];
-};
-
-struct ipx_interface_definition {
-	__be32        ipx_network;
-	unsigned char ipx_device[16];
-	unsigned char ipx_dlink_type;
-#define IPX_FRAME_NONE		0
-#define IPX_FRAME_SNAP		1
-#define IPX_FRAME_8022		2
-#define IPX_FRAME_ETHERII	3
-#define IPX_FRAME_8023		4
-#define IPX_FRAME_TR_8022       5 /* obsolete */
-	unsigned char ipx_special;
-#define IPX_SPECIAL_NONE	0
-#define IPX_PRIMARY		1
-#define IPX_INTERNAL		2
-	unsigned char ipx_node[IPX_NODE_LEN];
-};
-	
-struct ipx_config_data {
-	unsigned char	ipxcfg_auto_select_primary;
-	unsigned char	ipxcfg_auto_create_interfaces;
-};
-
-/*
- * OLD Route Definition for backward compatibility.
- */
-
-struct ipx_route_def {
-	__be32		ipx_network;
-	__be32		ipx_router_network;
-#define IPX_ROUTE_NO_ROUTER	0
-	unsigned char	ipx_router_node[IPX_NODE_LEN];
-	unsigned char	ipx_device[16];
-	unsigned short	ipx_flags;
-#define IPX_RT_SNAP		8
-#define IPX_RT_8022		4
-#define IPX_RT_BLUEBOOK		2
-#define IPX_RT_ROUTED		1
-};
-
-#define SIOCAIPXITFCRT		(SIOCPROTOPRIVATE)
-#define SIOCAIPXPRISLT		(SIOCPROTOPRIVATE + 1)
-#define SIOCIPXCFGDATA		(SIOCPROTOPRIVATE + 2)
-#define SIOCIPXNCPCONN		(SIOCPROTOPRIVATE + 3)
-#endif /* _IPX_H_ */
diff --git a/include/linux/irda.h b/include/linux/irda.h
deleted file mode 100644
index a014c3252311..000000000000
--- a/include/linux/irda.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      irda.h
- * Version:       
- * Description:   
- * Status:        Experimental.
- * Author:        Dag Brattli <dagb@cs.uit.no>
- * Created at:    Mon Mar  8 14:06:12 1999
- * Modified at:   Sat Dec 25 16:06:42 1999
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- *     Neither Dag Brattli nor University of Tromsø admit liability nor
- *     provide warranty for any of this software. This material is 
- *     provided "AS-IS" and at no charge.
- *
- ********************************************************************/
-
-#ifndef KERNEL_IRDA_H
-#define KERNEL_IRDA_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Note that this file is shared with user space. */
-
-/* Hint bit positions for first hint byte */
-#define HINT_PNP         0x01
-#define HINT_PDA         0x02
-#define HINT_COMPUTER    0x04
-#define HINT_PRINTER     0x08
-#define HINT_MODEM       0x10
-#define HINT_FAX         0x20
-#define HINT_LAN         0x40
-#define HINT_EXTENSION   0x80
-
-/* Hint bit positions for second hint byte (first extension byte) */
-#define HINT_TELEPHONY   0x01
-#define HINT_FILE_SERVER 0x02
-#define HINT_COMM        0x04
-#define HINT_MESSAGE     0x08
-#define HINT_HTTP        0x10
-#define HINT_OBEX        0x20
-
-/* IrLMP character code values */
-#define CS_ASCII         0x00
-#define	CS_ISO_8859_1    0x01
-#define	CS_ISO_8859_2    0x02
-#define	CS_ISO_8859_3    0x03
-#define	CS_ISO_8859_4    0x04
-#define	CS_ISO_8859_5    0x05
-#define	CS_ISO_8859_6    0x06
-#define	CS_ISO_8859_7    0x07
-#define	CS_ISO_8859_8    0x08
-#define	CS_ISO_8859_9    0x09
-#define CS_UNICODE       0xff
-
-/* These are the currently known dongles */
-typedef enum {
-	IRDA_TEKRAM_DONGLE       = 0,
-	IRDA_ESI_DONGLE          = 1,
-	IRDA_ACTISYS_DONGLE      = 2,
-	IRDA_ACTISYS_PLUS_DONGLE = 3,
-	IRDA_GIRBIL_DONGLE       = 4,
-	IRDA_LITELINK_DONGLE     = 5,
-	IRDA_AIRPORT_DONGLE      = 6,
-	IRDA_OLD_BELKIN_DONGLE   = 7,
-	IRDA_EP7211_IR           = 8,
-	IRDA_MCP2120_DONGLE      = 9,
-	IRDA_ACT200L_DONGLE      = 10,
-	IRDA_MA600_DONGLE        = 11,
-	IRDA_TOIM3232_DONGLE     = 12,
-	IRDA_EP7211_DONGLE       = 13,
-} IRDA_DONGLE;
-
-/* Protocol types to be used for SOCK_DGRAM */
-enum {
-	IRDAPROTO_UNITDATA = 0,
-	IRDAPROTO_ULTRA    = 1,
-	IRDAPROTO_MAX
-};
-
-#define SOL_IRLMP      266 /* Same as SOL_IRDA for now */
-#define SOL_IRTTP      266 /* Same as SOL_IRDA for now */
-
-#define IRLMP_ENUMDEVICES        1	/* Return discovery log */
-#define IRLMP_IAS_SET            2	/* Set an attribute in local IAS */
-#define IRLMP_IAS_QUERY          3	/* Query remote IAS for attribute */
-#define IRLMP_HINTS_SET          4	/* Set hint bits advertised */
-#define IRLMP_QOS_SET            5
-#define IRLMP_QOS_GET            6
-#define IRLMP_MAX_SDU_SIZE       7
-#define IRLMP_IAS_GET            8	/* Get an attribute from local IAS */
-#define IRLMP_IAS_DEL		 9	/* Remove attribute from local IAS */
-#define IRLMP_HINT_MASK_SET	10	/* Set discovery filter */
-#define IRLMP_WAITDEVICE	11	/* Wait for a new discovery */
-
-#define IRTTP_MAX_SDU_SIZE IRLMP_MAX_SDU_SIZE /* Compatibility */
-
-#define IAS_MAX_STRING         256	/* See IrLMP 1.1, 4.3.3.2 */
-#define IAS_MAX_OCTET_STRING  1024	/* See IrLMP 1.1, 4.3.3.2 */
-#define IAS_MAX_CLASSNAME       60	/* See IrLMP 1.1, 4.3.1 */
-#define IAS_MAX_ATTRIBNAME      60	/* See IrLMP 1.1, 4.3.3.1 */
-#define IAS_MAX_ATTRIBNUMBER   256	/* See IrLMP 1.1, 4.3.3.1 */
-/* For user space backward compatibility - may be fixed in kernel 2.5.X
- * Note : need 60+1 ('\0'), make it 64 for alignement - Jean II */
-#define IAS_EXPORT_CLASSNAME       64
-#define IAS_EXPORT_ATTRIBNAME     256
-
-/* Attribute type needed for struct irda_ias_set */
-#define IAS_MISSING 0
-#define IAS_INTEGER 1
-#define IAS_OCT_SEQ 2
-#define IAS_STRING  3
-
-#define LSAP_ANY              0xff
-
-struct sockaddr_irda {
-	__kernel_sa_family_t sir_family; /* AF_IRDA */
-	__u8        sir_lsap_sel; /* LSAP selector */
-	__u32       sir_addr;     /* Device address */
-	char        sir_name[25]; /* Usually <service>:IrDA:TinyTP */
-};
-
-struct irda_device_info {
-	__u32       saddr;    /* Address of local interface */
-	__u32       daddr;    /* Address of remote device */
-	char        info[22]; /* Description */
-	__u8        charset;  /* Charset used for description */
-	__u8        hints[2]; /* Hint bits */
-};
-
-struct irda_device_list {
-       __u32 len;
-       struct irda_device_info dev[1];
-};
-
-struct irda_ias_set {
-	char irda_class_name[IAS_EXPORT_CLASSNAME];
-	char irda_attrib_name[IAS_EXPORT_ATTRIBNAME];
-	unsigned int irda_attrib_type;
-	union {
-		unsigned int irda_attrib_int;
-		struct {
-			unsigned short len;
-			__u8 octet_seq[IAS_MAX_OCTET_STRING];
-		} irda_attrib_octet_seq;
-		struct {
-			__u8 len;
-			__u8 charset;
-			__u8 string[IAS_MAX_STRING];
-		} irda_attrib_string;
-	} attribute;
-	__u32       daddr;    /* Address of device (for some queries only) */
-};
-
-/* Some private IOCTL's (max 16) */
-#define SIOCSDONGLE    (SIOCDEVPRIVATE + 0)
-#define SIOCGDONGLE    (SIOCDEVPRIVATE + 1)
-#define SIOCSBANDWIDTH (SIOCDEVPRIVATE + 2)
-#define SIOCSMEDIABUSY (SIOCDEVPRIVATE + 3)
-#define SIOCGMEDIABUSY (SIOCDEVPRIVATE + 4)
-#define SIOCGRECEIVING (SIOCDEVPRIVATE + 5)
-#define SIOCSMODE      (SIOCDEVPRIVATE + 6)
-#define SIOCGMODE      (SIOCDEVPRIVATE + 7)
-#define SIOCSDTRRTS    (SIOCDEVPRIVATE + 8)
-#define SIOCGQOS       (SIOCDEVPRIVATE + 9)
-
-/* No reason to include <linux/if.h> just because of this one ;-) */
-#define IRNAMSIZ 16 
-
-/* IrDA quality of service information (must not exceed 16 bytes) */
-struct if_irda_qos {
-	unsigned long  baudrate;
-	unsigned short data_size;
-	unsigned short window_size;
-	unsigned short min_turn_time;
-	unsigned short max_turn_time;
-	unsigned char  add_bofs;
-	unsigned char  link_disc;
-};
-
-/* For setting RTS and DTR lines of a dongle */
-struct if_irda_line {
-	__u8 dtr;
-	__u8 rts;
-};
-
-/* IrDA interface configuration (data part must not exceed 16 bytes) */
-struct if_irda_req {
-	union {
-		char ifrn_name[IRNAMSIZ];  /* if name, e.g. "irda0" */
-	} ifr_ifrn;
-	
-	/* Data part */
-	union {
-		struct if_irda_line ifru_line;
-		struct if_irda_qos  ifru_qos;
-		unsigned short      ifru_flags;
-		unsigned int        ifru_receiving;
-		unsigned int        ifru_mode;
-		unsigned int        ifru_dongle;
-	} ifr_ifru;
-};
-
-#define ifr_baudrate  ifr_ifru.ifru_qos.baudrate
-#define ifr_receiving ifr_ifru.ifru_receiving 
-#define ifr_dongle    ifr_ifru.ifru_dongle
-#define ifr_mode      ifr_ifru.ifru_mode
-#define ifr_dtr       ifr_ifru.ifru_line.dtr
-#define ifr_rts       ifr_ifru.ifru_line.rts
-
-
-/* IrDA netlink definitions */
-#define IRDA_NL_NAME "irda"
-#define IRDA_NL_VERSION 1
-
-enum irda_nl_commands {
-	IRDA_NL_CMD_UNSPEC,
-	IRDA_NL_CMD_SET_MODE,
-	IRDA_NL_CMD_GET_MODE,
-
-	__IRDA_NL_CMD_AFTER_LAST
-};
-#define IRDA_NL_CMD_MAX (__IRDA_NL_CMD_AFTER_LAST - 1)
-
-enum nl80211_attrs {
-	IRDA_NL_ATTR_UNSPEC,
-	IRDA_NL_ATTR_IFNAME,
-	IRDA_NL_ATTR_MODE,
-
-	__IRDA_NL_ATTR_AFTER_LAST
-};
-#define IRDA_NL_ATTR_MAX (__IRDA_NL_ATTR_AFTER_LAST - 1)
-
-/* IrDA modes */
-#define IRDA_MODE_PRIMARY   0x1
-#define IRDA_MODE_SECONDARY 0x2
-#define IRDA_MODE_MONITOR   0x4
-
-#endif /* KERNEL_IRDA_H */
-
-
-
-
diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h
index 3bc4dcab6e82..0a2dc46cdaf6 100644
--- a/include/linux/irqnr.h
+++ b/include/linux/irqnr.h
@@ -1,10 +1,8 @@
 #ifndef _LINUX_IRQNR_H
 #define _LINUX_IRQNR_H
 
-/*
- * Generic irq_desc iterators:
- */
-#ifdef __KERNEL__
+#include <uapi/linux/irqnr.h>
+
 
 #ifndef CONFIG_GENERIC_HARDIRQS
 #include <asm/irq.h>
@@ -57,6 +55,4 @@ unsigned int irq_get_next_irq(unsigned int offset);
 #define for_each_irq_nr(irq)                   \
        for (irq = 0; irq < nr_irqs; irq++)
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
index 215c41602af8..1e9a0f2a8626 100644
--- a/include/linux/isdn.h
+++ b/include/linux/isdn.h
@@ -10,136 +10,9 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef __ISDN_H__
 #define __ISDN_H__
 
-#include <linux/ioctl.h>
-#include <linux/tty.h>
-
-#define ISDN_MAX_DRIVERS    32
-#define ISDN_MAX_CHANNELS   64
-
-/* New ioctl-codes */
-#define IIOCNETAIF  _IO('I',1)
-#define IIOCNETDIF  _IO('I',2)
-#define IIOCNETSCF  _IO('I',3)
-#define IIOCNETGCF  _IO('I',4)
-#define IIOCNETANM  _IO('I',5)
-#define IIOCNETDNM  _IO('I',6)
-#define IIOCNETGNM  _IO('I',7)
-#define IIOCGETSET  _IO('I',8) /* no longer supported */
-#define IIOCSETSET  _IO('I',9) /* no longer supported */
-#define IIOCSETVER  _IO('I',10)
-#define IIOCNETHUP  _IO('I',11)
-#define IIOCSETGST  _IO('I',12)
-#define IIOCSETBRJ  _IO('I',13)
-#define IIOCSIGPRF  _IO('I',14)
-#define IIOCGETPRF  _IO('I',15)
-#define IIOCSETPRF  _IO('I',16)
-#define IIOCGETMAP  _IO('I',17)
-#define IIOCSETMAP  _IO('I',18)
-#define IIOCNETASL  _IO('I',19)
-#define IIOCNETDIL  _IO('I',20)
-#define IIOCGETCPS  _IO('I',21)
-#define IIOCGETDVR  _IO('I',22)
-#define IIOCNETLCR  _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
-#define IIOCNETDWRSET  _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
-
-#define IIOCNETALN  _IO('I',32)
-#define IIOCNETDLN  _IO('I',33)
-
-#define IIOCNETGPN  _IO('I',34)
-
-#define IIOCDBGVAR  _IO('I',127)
-
-#define IIOCDRVCTL  _IO('I',128)
-
-/* cisco hdlck device private ioctls */
-#define SIOCGKEEPPERIOD	(SIOCDEVPRIVATE + 0)
-#define SIOCSKEEPPERIOD	(SIOCDEVPRIVATE + 1)
-#define SIOCGDEBSERINT	(SIOCDEVPRIVATE + 2)
-#define SIOCSDEBSERINT	(SIOCDEVPRIVATE + 3)
-
-/* Packet encapsulations for net-interfaces */
-#define ISDN_NET_ENCAP_ETHER      0
-#define ISDN_NET_ENCAP_RAWIP      1
-#define ISDN_NET_ENCAP_IPTYP      2
-#define ISDN_NET_ENCAP_CISCOHDLC  3 /* Without SLARP and keepalive */
-#define ISDN_NET_ENCAP_SYNCPPP    4
-#define ISDN_NET_ENCAP_UIHDLC     5
-#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive    */
-#define ISDN_NET_ENCAP_X25IFACE   7 /* Documentation/networking/x25-iface.txt */
-#define ISDN_NET_ENCAP_MAX_ENCAP  ISDN_NET_ENCAP_X25IFACE
-
-/* Facility which currently uses an ISDN-channel */
-#define ISDN_USAGE_NONE       0
-#define ISDN_USAGE_RAW        1
-#define ISDN_USAGE_MODEM      2
-#define ISDN_USAGE_NET        3
-#define ISDN_USAGE_VOICE      4
-#define ISDN_USAGE_FAX        5
-#define ISDN_USAGE_MASK       7 /* Mask to get plain usage */
-#define ISDN_USAGE_DISABLED  32 /* This bit is set, if channel is disabled */
-#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
-#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing  */
-
-#define ISDN_MODEM_NUMREG    24        /* Number of Modem-Registers        */
-#define ISDN_LMSNLEN         255 /* Length of tty's Listen-MSN string */
-#define ISDN_CMSGLEN	     50	 /* Length of CONNECT-Message to add for Modem */
-
-#define ISDN_MSNLEN          32
-#define NET_DV 0x06  /* Data version for isdn_net_ioctl_cfg   */
-#define TTY_DV 0x06  /* Data version for iprofd etc.          */
-
-#define INF_DV 0x01  /* Data version for /dev/isdninfo        */
-
-typedef struct {
-  char drvid[25];
-  unsigned long arg;
-} isdn_ioctl_struct;
-
-typedef struct {
-  char name[10];
-  char phone[ISDN_MSNLEN];
-  int  outgoing;
-} isdn_net_ioctl_phone;
-
-typedef struct {
-  char name[10];     /* Name of interface                     */
-  char master[10];   /* Name of Master for Bundling           */
-  char slave[10];    /* Name of Slave for Bundling            */
-  char eaz[256];     /* EAZ/MSN                               */
-  char drvid[25];    /* DriverId for Bindings                 */
-  int  onhtime;      /* Hangup-Timeout                        */
-  int  charge;       /* Charge-Units                          */
-  int  l2_proto;     /* Layer-2 protocol                      */
-  int  l3_proto;     /* Layer-3 protocol                      */
-  int  p_encap;      /* Encapsulation                         */
-  int  exclusive;    /* Channel, if bound exclusive           */
-  int  dialmax;      /* Dial Retry-Counter                    */
-  int  slavedelay;   /* Delay until slave starts up           */
-  int  cbdelay;      /* Delay before Callback                 */
-  int  chargehup;    /* Flag: Charge-Hangup                   */
-  int  ihup;         /* Flag: Hangup-Timeout on incoming line */
-  int  secure;       /* Flag: Secure                          */
-  int  callback;     /* Flag: Callback                        */
-  int  cbhup;        /* Flag: Reject Call before Callback     */
-  int  pppbind;      /* ippp device for bindings              */
-  int  chargeint;    /* Use fixed charge interval length      */
-  int  triggercps;   /* BogoCPS needed for triggering slave   */
-  int  dialtimeout;  /* Dial-Timeout                          */
-  int  dialwait;     /* Time to wait after failed dial        */
-  int  dialmode;     /* Flag: off / on / auto                 */
-} isdn_net_ioctl_cfg;
-
-#define ISDN_NET_DIALMODE_MASK  0xC0    /* bits for status                */
-#define ISDN_NET_DM_OFF	        0x00    /* this interface is stopped      */
-#define ISDN_NET_DM_MANUAL	0x40    /* this interface is on (manual)  */
-#define ISDN_NET_DM_AUTO	0x80    /* this interface is autodial     */
-#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
-
-#ifdef __KERNEL__
 
 #include <linux/errno.h>
 #include <linux/fs.h>
@@ -163,6 +36,7 @@ typedef struct {
 #include <linux/skbuff.h>
 #include <linux/tcp.h>
 #include <linux/mutex.h>
+#include <uapi/linux/isdn.h>
 
 #define ISDN_TTY_MAJOR    43
 #define ISDN_TTYAUX_MAJOR 44
@@ -595,6 +469,4 @@ typedef struct isdn_devt {
 extern isdn_dev *dev;
 
 
-#endif /* __KERNEL__ */
-
 #endif /* __ISDN_H__ */
diff --git a/include/linux/isdn_divertif.h b/include/linux/isdn_divertif.h
index a5a50f523807..19ab361f9f07 100644
--- a/include/linux/isdn_divertif.h
+++ b/include/linux/isdn_divertif.h
@@ -9,26 +9,12 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef _LINUX_ISDN_DIVERTIF_H
 #define _LINUX_ISDN_DIVERTIF_H
 
-/***********************************************************/
-/* magic value is also used to control version information */
-/***********************************************************/
-#define DIVERT_IF_MAGIC 0x25873401
-#define DIVERT_CMD_REG  0x00  /* register command */
-#define DIVERT_CMD_REL  0x01  /* release command */
-#define DIVERT_NO_ERR   0x00  /* return value no error */
-#define DIVERT_CMD_ERR  0x01  /* invalid cmd */
-#define DIVERT_VER_ERR  0x02  /* magic/version invalid */
-#define DIVERT_REG_ERR  0x03  /* module already registered */
-#define DIVERT_REL_ERR  0x04  /* module not registered */
-#define DIVERT_REG_NAME isdn_register_divert
-
-#ifdef __KERNEL__
 #include <linux/isdnif.h>
 #include <linux/types.h>
+#include <uapi/linux/isdn_divertif.h>
 
 /***************************************************************/
 /* structure exchanging data between isdn hl and divert module */
@@ -46,6 +32,4 @@ typedef struct
 /* function register */
 /*********************/
 extern int DIVERT_REG_NAME(isdn_divert_if *);
-#endif
-
 #endif /* _LINUX_ISDN_DIVERTIF_H */
diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h
index 8687a7dc0632..d5f62bc5f4be 100644
--- a/include/linux/isdn_ppp.h
+++ b/include/linux/isdn_ppp.h
@@ -9,68 +9,16 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef _LINUX_ISDN_PPP_H
 #define _LINUX_ISDN_PPP_H
 
-#define CALLTYPE_INCOMING 0x1
-#define CALLTYPE_OUTGOING 0x2
-#define CALLTYPE_CALLBACK 0x4
-
-#define IPPP_VERSION    "2.2.0"
-
-struct pppcallinfo
-{
-  int calltype;
-  unsigned char local_num[64];
-  unsigned char remote_num[64];
-  int charge_units;
-};
-
-#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
-#define PPPIOCBUNDLE   _IOW('t',129,int)
-#define PPPIOCGMPFLAGS _IOR('t',130,int)
-#define PPPIOCSMPFLAGS _IOW('t',131,int)
-#define PPPIOCSMPMTU   _IOW('t',132,int)
-#define PPPIOCSMPMRU   _IOW('t',133,int)
-#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
-#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
-#define PPPIOCGIFNAME      _IOR('t',136, char [IFNAMSIZ] )
-
-
-#define SC_MP_PROT       0x00000200
-#define SC_REJ_MP_PROT   0x00000400
-#define SC_OUT_SHORT_SEQ 0x00000800
-#define SC_IN_SHORT_SEQ  0x00004000
-
-#define SC_DECOMP_ON		0x01
-#define SC_COMP_ON		0x02
-#define SC_DECOMP_DISCARD	0x04
-#define SC_COMP_DISCARD		0x08
-#define SC_LINK_DECOMP_ON	0x10
-#define SC_LINK_COMP_ON		0x20
-#define SC_LINK_DECOMP_DISCARD	0x40
-#define SC_LINK_COMP_DISCARD	0x80
-
-#define ISDN_PPP_COMP_MAX_OPTIONS 16
-
-#define IPPP_COMP_FLAG_XMIT 0x1
-#define IPPP_COMP_FLAG_LINK 0x2
-
-struct isdn_ppp_comp_data {
-  int num;
-  unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
-  int optlen;
-  int flags;
-};
-
-#ifdef __KERNEL__
 
 
 
 #ifdef CONFIG_IPPP_FILTER
 #include <linux/filter.h>
 #endif
+#include <uapi/linux/isdn_ppp.h>
 
 #define DECOMP_ERR_NOMEM	(-10)
 
@@ -244,5 +192,4 @@ struct ippp_struct {
   unsigned long compflags;
 };
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_ISDN_PPP_H */
diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h
index b8c23f88dd54..0fc6ff276221 100644
--- a/include/linux/isdnif.h
+++ b/include/linux/isdnif.h
@@ -10,51 +10,12 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef __ISDNIF_H__
 #define __ISDNIF_H__
 
 
-/*
- * Values for general protocol-selection
- */
-#define ISDN_PTYPE_UNKNOWN   0   /* Protocol undefined   */
-#define ISDN_PTYPE_1TR6      1   /* german 1TR6-protocol */
-#define ISDN_PTYPE_EURO      2   /* EDSS1-protocol       */
-#define ISDN_PTYPE_LEASED    3   /* for leased lines     */
-#define ISDN_PTYPE_NI1       4   /* US NI-1 protocol     */
-#define ISDN_PTYPE_MAX       7   /* Max. 8 Protocols     */
-
-/*
- * Values for Layer-2-protocol-selection
- */
-#define ISDN_PROTO_L2_X75I   0   /* X75/LAPB with I-Frames            */
-#define ISDN_PROTO_L2_X75UI  1   /* X75/LAPB with UI-Frames           */
-#define ISDN_PROTO_L2_X75BUI 2   /* X75/LAPB with UI-Frames           */
-#define ISDN_PROTO_L2_HDLC   3   /* HDLC                              */
-#define ISDN_PROTO_L2_TRANS  4   /* Transparent (Voice)               */
-#define ISDN_PROTO_L2_X25DTE 5   /* X25/LAPB DTE mode                 */
-#define ISDN_PROTO_L2_X25DCE 6   /* X25/LAPB DCE mode                 */
-#define ISDN_PROTO_L2_V11096 7   /* V.110 bitrate adaption 9600 Baud  */
-#define ISDN_PROTO_L2_V11019 8   /* V.110 bitrate adaption 19200 Baud */
-#define ISDN_PROTO_L2_V11038 9   /* V.110 bitrate adaption 38400 Baud */
-#define ISDN_PROTO_L2_MODEM  10  /* Analog Modem on Board */
-#define ISDN_PROTO_L2_FAX    11  /* Fax Group 2/3         */
-#define ISDN_PROTO_L2_HDLC_56K 12   /* HDLC 56k                          */
-#define ISDN_PROTO_L2_MAX    15  /* Max. 16 Protocols                 */
-
-/*
- * Values for Layer-3-protocol-selection
- */
-#define ISDN_PROTO_L3_TRANS	0	/* Transparent */
-#define ISDN_PROTO_L3_TRANSDSP	1	/* Transparent with DSP */
-#define ISDN_PROTO_L3_FCLASS2	2	/* Fax Group 2/3 CLASS 2 */
-#define ISDN_PROTO_L3_FCLASS1	3	/* Fax Group 2/3 CLASS 1 */
-#define ISDN_PROTO_L3_MAX	7	/* Max. 8 Protocols */
-
-#ifdef __KERNEL__
-
 #include <linux/skbuff.h>
+#include <uapi/linux/isdnif.h>
 
 /***************************************************************************/
 /* Extensions made by Werner Cornelius (werner@ikt.de)                     */
@@ -541,6 +502,4 @@ typedef struct {
 extern int register_isdn(isdn_if*);
 #include <asm/uaccess.h>
 
-#endif /* __KERNEL__ */
-
 #endif /* __ISDNIF_H__ */
diff --git a/include/linux/iso_fs.h b/include/linux/iso_fs.h
deleted file mode 100644
index 4688ac4284e2..000000000000
--- a/include/linux/iso_fs.h
+++ /dev/null
@@ -1,165 +0,0 @@
-#ifndef _ISOFS_FS_H
-#define _ISOFS_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/*
- * The isofs filesystem constants/structures
- */
-
-/* This part borrowed from the bsd386 isofs */
-#define ISODCL(from, to) (to - from + 1)
-
-struct iso_volume_descriptor {
-	char type[ISODCL(1,1)]; /* 711 */
-	char id[ISODCL(2,6)];
-	char version[ISODCL(7,7)];
-	char data[ISODCL(8,2048)];
-};
-
-/* volume descriptor types */
-#define ISO_VD_PRIMARY 1
-#define ISO_VD_SUPPLEMENTARY 2
-#define ISO_VD_END 255
-
-#define ISO_STANDARD_ID "CD001"
-
-struct iso_primary_descriptor {
-	char type			[ISODCL (  1,   1)]; /* 711 */
-	char id				[ISODCL (  2,   6)];
-	char version			[ISODCL (  7,   7)]; /* 711 */
-	char unused1			[ISODCL (  8,   8)];
-	char system_id			[ISODCL (  9,  40)]; /* achars */
-	char volume_id			[ISODCL ( 41,  72)]; /* dchars */
-	char unused2			[ISODCL ( 73,  80)];
-	char volume_space_size		[ISODCL ( 81,  88)]; /* 733 */
-	char unused3			[ISODCL ( 89, 120)];
-	char volume_set_size		[ISODCL (121, 124)]; /* 723 */
-	char volume_sequence_number	[ISODCL (125, 128)]; /* 723 */
-	char logical_block_size		[ISODCL (129, 132)]; /* 723 */
-	char path_table_size		[ISODCL (133, 140)]; /* 733 */
-	char type_l_path_table		[ISODCL (141, 144)]; /* 731 */
-	char opt_type_l_path_table	[ISODCL (145, 148)]; /* 731 */
-	char type_m_path_table		[ISODCL (149, 152)]; /* 732 */
-	char opt_type_m_path_table	[ISODCL (153, 156)]; /* 732 */
-	char root_directory_record	[ISODCL (157, 190)]; /* 9.1 */
-	char volume_set_id		[ISODCL (191, 318)]; /* dchars */
-	char publisher_id		[ISODCL (319, 446)]; /* achars */
-	char preparer_id		[ISODCL (447, 574)]; /* achars */
-	char application_id		[ISODCL (575, 702)]; /* achars */
-	char copyright_file_id		[ISODCL (703, 739)]; /* 7.5 dchars */
-	char abstract_file_id		[ISODCL (740, 776)]; /* 7.5 dchars */
-	char bibliographic_file_id	[ISODCL (777, 813)]; /* 7.5 dchars */
-	char creation_date		[ISODCL (814, 830)]; /* 8.4.26.1 */
-	char modification_date		[ISODCL (831, 847)]; /* 8.4.26.1 */
-	char expiration_date		[ISODCL (848, 864)]; /* 8.4.26.1 */
-	char effective_date		[ISODCL (865, 881)]; /* 8.4.26.1 */
-	char file_structure_version	[ISODCL (882, 882)]; /* 711 */
-	char unused4			[ISODCL (883, 883)];
-	char application_data		[ISODCL (884, 1395)];
-	char unused5			[ISODCL (1396, 2048)];
-};
-
-/* Almost the same as the primary descriptor but two fields are specified */
-struct iso_supplementary_descriptor {
-	char type			[ISODCL (  1,   1)]; /* 711 */
-	char id				[ISODCL (  2,   6)];
-	char version			[ISODCL (  7,   7)]; /* 711 */
-	char flags			[ISODCL (  8,   8)]; /* 853 */
-	char system_id			[ISODCL (  9,  40)]; /* achars */
-	char volume_id			[ISODCL ( 41,  72)]; /* dchars */
-	char unused2			[ISODCL ( 73,  80)];
-	char volume_space_size		[ISODCL ( 81,  88)]; /* 733 */
-	char escape			[ISODCL ( 89, 120)]; /* 856 */
-	char volume_set_size		[ISODCL (121, 124)]; /* 723 */
-	char volume_sequence_number	[ISODCL (125, 128)]; /* 723 */
-	char logical_block_size		[ISODCL (129, 132)]; /* 723 */
-	char path_table_size		[ISODCL (133, 140)]; /* 733 */
-	char type_l_path_table		[ISODCL (141, 144)]; /* 731 */
-	char opt_type_l_path_table	[ISODCL (145, 148)]; /* 731 */
-	char type_m_path_table		[ISODCL (149, 152)]; /* 732 */
-	char opt_type_m_path_table	[ISODCL (153, 156)]; /* 732 */
-	char root_directory_record	[ISODCL (157, 190)]; /* 9.1 */
-	char volume_set_id		[ISODCL (191, 318)]; /* dchars */
-	char publisher_id		[ISODCL (319, 446)]; /* achars */
-	char preparer_id		[ISODCL (447, 574)]; /* achars */
-	char application_id		[ISODCL (575, 702)]; /* achars */
-	char copyright_file_id		[ISODCL (703, 739)]; /* 7.5 dchars */
-	char abstract_file_id		[ISODCL (740, 776)]; /* 7.5 dchars */
-	char bibliographic_file_id	[ISODCL (777, 813)]; /* 7.5 dchars */
-	char creation_date		[ISODCL (814, 830)]; /* 8.4.26.1 */
-	char modification_date		[ISODCL (831, 847)]; /* 8.4.26.1 */
-	char expiration_date		[ISODCL (848, 864)]; /* 8.4.26.1 */
-	char effective_date		[ISODCL (865, 881)]; /* 8.4.26.1 */
-	char file_structure_version	[ISODCL (882, 882)]; /* 711 */
-	char unused4			[ISODCL (883, 883)];
-	char application_data		[ISODCL (884, 1395)];
-	char unused5			[ISODCL (1396, 2048)];
-};
-
-
-#define HS_STANDARD_ID "CDROM"
-
-struct  hs_volume_descriptor {
-	char foo			[ISODCL (  1,   8)]; /* 733 */
-	char type			[ISODCL (  9,   9)]; /* 711 */
-	char id				[ISODCL ( 10,  14)];
-	char version			[ISODCL ( 15,  15)]; /* 711 */
-	char data[ISODCL(16,2048)];
-};
-
-
-struct hs_primary_descriptor {
-	char foo			[ISODCL (  1,   8)]; /* 733 */
-	char type			[ISODCL (  9,   9)]; /* 711 */
-	char id				[ISODCL ( 10,  14)];
-	char version			[ISODCL ( 15,  15)]; /* 711 */
-	char unused1			[ISODCL ( 16,  16)]; /* 711 */
-	char system_id			[ISODCL ( 17,  48)]; /* achars */
-	char volume_id			[ISODCL ( 49,  80)]; /* dchars */
-	char unused2			[ISODCL ( 81,  88)]; /* 733 */
-	char volume_space_size		[ISODCL ( 89,  96)]; /* 733 */
-	char unused3			[ISODCL ( 97, 128)]; /* 733 */
-	char volume_set_size		[ISODCL (129, 132)]; /* 723 */
-	char volume_sequence_number	[ISODCL (133, 136)]; /* 723 */
-	char logical_block_size		[ISODCL (137, 140)]; /* 723 */
-	char path_table_size		[ISODCL (141, 148)]; /* 733 */
-	char type_l_path_table		[ISODCL (149, 152)]; /* 731 */
-	char unused4			[ISODCL (153, 180)]; /* 733 */
-	char root_directory_record	[ISODCL (181, 214)]; /* 9.1 */
-};
-
-/* We use this to help us look up the parent inode numbers. */
-
-struct iso_path_table{
-	unsigned char  name_len[2];	/* 721 */
-	char extent[4];		/* 731 */
-	char  parent[2];	/* 721 */
-	char name[0];
-} __attribute__((packed));
-
-/* high sierra is identical to iso, except that the date is only 6 bytes, and
-   there is an extra reserved byte after the flags */
-
-struct iso_directory_record {
-	char length			[ISODCL (1, 1)]; /* 711 */
-	char ext_attr_length		[ISODCL (2, 2)]; /* 711 */
-	char extent			[ISODCL (3, 10)]; /* 733 */
-	char size			[ISODCL (11, 18)]; /* 733 */
-	char date			[ISODCL (19, 25)]; /* 7 by 711 */
-	char flags			[ISODCL (26, 26)];
-	char file_unit_size		[ISODCL (27, 27)]; /* 711 */
-	char interleave			[ISODCL (28, 28)]; /* 711 */
-	char volume_sequence_number	[ISODCL (29, 32)]; /* 723 */
-	unsigned char name_len		[ISODCL (33, 33)]; /* 711 */
-	char name			[0];
-} __attribute__((packed));
-
-#define ISOFS_BLOCK_BITS 11
-#define ISOFS_BLOCK_SIZE 2048
-
-#define ISOFS_BUFFER_SIZE(INODE) ((INODE)->i_sb->s_blocksize)
-#define ISOFS_BUFFER_BITS(INODE) ((INODE)->i_sb->s_blocksize_bits)
-
-#endif /* _ISOFS_FS_H */
diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h
deleted file mode 100644
index 42bf725751af..000000000000
--- a/include/linux/ivtv.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-    Public ivtv API header
-    Copyright (C) 2003-2004  Kevin Thayer <nufan_wfk at yahoo.com>
-    Copyright (C) 2004-2007  Hans Verkuil <hverkuil@xs4all.nl>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_IVTV_H__
-#define __LINUX_IVTV_H__
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-
-/* ivtv knows several distinct output modes: MPEG streaming,
-   YUV streaming, YUV updates through user DMA and the passthrough
-   mode.
-
-   In order to clearly tell the driver that we are in user DMA
-   YUV mode you need to call IVTV_IOC_DMA_FRAME with y_source == NULL
-   first (althrough if you don't then the first time
-   DMA_FRAME is called the mode switch is done automatically).
-
-   When you close the file handle the user DMA mode is exited again.
-
-   While in one mode, you cannot use another mode (EBUSY is returned).
-
-   All this means that if you want to change the YUV interlacing
-   for the user DMA YUV mode you first need to do call IVTV_IOC_DMA_FRAME
-   with y_source == NULL before you can set the correct format using
-   VIDIOC_S_FMT.
-
-   Eventually all this should be replaced with a proper V4L2 API,
-   but for now we have to do it this way. */
-
-struct ivtv_dma_frame {
-	enum v4l2_buf_type type; /* V4L2_BUF_TYPE_VIDEO_OUTPUT */
-	__u32 pixelformat;	 /* 0 == same as destination */
-	void __user *y_source;   /* if NULL and type == V4L2_BUF_TYPE_VIDEO_OUTPUT,
-				    then just switch to user DMA YUV output mode */
-	void __user *uv_source;  /* Unused for RGB pixelformats */
-	struct v4l2_rect src;
-	struct v4l2_rect dst;
-	__u32 src_width;
-	__u32 src_height;
-};
-
-#define IVTV_IOC_DMA_FRAME		_IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame)
-
-/* Select the passthrough mode (if the argument is non-zero). In the passthrough
-   mode the output of the encoder is passed immediately into the decoder. */
-#define IVTV_IOC_PASSTHROUGH_MODE	_IOW ('V', BASE_VIDIOC_PRIVATE+1, int)
-
-/* Deprecated defines: applications should use the defines from videodev2.h */
-#define IVTV_SLICED_TYPE_TELETEXT_B     V4L2_MPEG_VBI_IVTV_TELETEXT_B
-#define IVTV_SLICED_TYPE_CAPTION_525    V4L2_MPEG_VBI_IVTV_CAPTION_525
-#define IVTV_SLICED_TYPE_WSS_625        V4L2_MPEG_VBI_IVTV_WSS_625
-#define IVTV_SLICED_TYPE_VPS            V4L2_MPEG_VBI_IVTV_VPS
-
-#endif /* _LINUX_IVTV_H */
diff --git a/include/linux/ivtvfb.h b/include/linux/ivtvfb.h
deleted file mode 100644
index e8b92f67f10d..000000000000
--- a/include/linux/ivtvfb.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
-    On Screen Display cx23415 Framebuffer driver
-
-    Copyright (C) 2006, 2007  Ian Armstrong <ian@iarmst.demon.co.uk>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_IVTVFB_H__
-#define __LINUX_IVTVFB_H__
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-/* Framebuffer external API */
-
-struct ivtvfb_dma_frame {
-	void __user *source;
-	unsigned long dest_offset;
-	int count;
-};
-
-#define IVTVFB_IOC_DMA_FRAME 	_IOW('V', BASE_VIDIOC_PRIVATE+0, struct ivtvfb_dma_frame)
-
-#endif
diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
deleted file mode 100644
index 94ab5e942e53..000000000000
--- a/include/linux/ixjuser.h
+++ /dev/null
@@ -1,720 +0,0 @@
-#ifndef __LINUX_IXJUSER_H
-#define __LINUX_IXJUSER_H
-
-/******************************************************************************
- *
- *    ixjuser.h
- *
- * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
- * including the Internet PhoneJACK, Internet PhoneJACK Lite,
- * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
- * SmartCABLE
- *
- *    (c) Copyright 1999-2001  Quicknet Technologies, Inc.
- *
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License
- *    as published by the Free Software Foundation; either version
- *    2 of the License, or (at your option) any later version.
- *
- * Author:          Ed Okerson, <eokerson@quicknet.net>
- *    
- * Contributors:    Greg Herlein, <gherlein@quicknet.net>
- *                  David W. Erhart, <derhart@quicknet.net>
- *                  John Sellers, <jsellers@quicknet.net>
- *                  Mike Preston, <mpreston@quicknet.net>
- *
- * More information about the hardware related to this driver can be found
- * at our website:    http://www.quicknet.net
- *
- * Fixes:
- *
- * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
- * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION 
- * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- *****************************************************************************/
-
-#include <linux/telephony.h>
-
-
-/******************************************************************************
-*
-* IOCTL's used for the Quicknet Telephony Cards
-*
-* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
-* reset the SRAM values before further use.
-*
-******************************************************************************/
-
-#define IXJCTL_DSP_RESET 		_IO  ('q', 0xC0)
-
-#define IXJCTL_RING                     PHONE_RING
-#define IXJCTL_HOOKSTATE                PHONE_HOOKSTATE
-#define IXJCTL_MAXRINGS			PHONE_MAXRINGS
-#define IXJCTL_RING_CADENCE		PHONE_RING_CADENCE
-#define IXJCTL_RING_START		PHONE_RING_START
-#define IXJCTL_RING_STOP		PHONE_RING_STOP
-
-#define IXJCTL_CARDTYPE			_IOR ('q', 0xC1, int)
-#define IXJCTL_SERIAL			_IOR ('q', 0xC2, int)
-#define IXJCTL_DSP_TYPE                 _IOR ('q', 0xC3, int)
-#define IXJCTL_DSP_VERSION              _IOR ('q', 0xC4, int)
-#define IXJCTL_VERSION              	_IOR ('q', 0xDA, char *)
-#define IXJCTL_DSP_IDLE			_IO  ('q', 0xC5)
-#define IXJCTL_TESTRAM			_IO  ('q', 0xC6)
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the record settings of the DSP
-*
-* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
-* Setting a lower depth reduces latency, but increases the demand of the
-* application to service the driver without frame loss.  The DSP has 480
-* bytes of physical buffer memory for the record channel so the true
-* maximum limit is determined by how many frames will fit in the buffer.
-*
-* 1 uncompressed (480 byte) 16-bit linear frame.
-* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
-* 15 TrueSpeech 8.5 frames.
-* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
-*
-* The default in the driver is currently set to 2 frames.
-*
-* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
-* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
-* signal by 2.0, 0x80 scales the signal by 0.5.  No protection is given
-* against over-scaling, if the multiplication factor times the input
-* signal exceeds 16 bits, overflow distortion will occur.  The default
-* setting is 0x100 (1.0).
-*
-* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
-* the most recently recorded frame as a 16 bit value.
-******************************************************************************/
-
-#define IXJCTL_REC_CODEC                PHONE_REC_CODEC
-#define IXJCTL_REC_START                PHONE_REC_START
-#define IXJCTL_REC_STOP                 PHONE_REC_STOP
-#define IXJCTL_REC_DEPTH		PHONE_REC_DEPTH
-#define IXJCTL_FRAME			PHONE_FRAME
-#define IXJCTL_REC_VOLUME		PHONE_REC_VOLUME
-#define IXJCTL_REC_LEVEL		PHONE_REC_LEVEL
-
-typedef enum {
-	f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
-	f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
-	f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
-	f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
-	f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
-	f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
-	f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
-	f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
-	lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
-} IXJ_FILTER_FREQ;
-
-typedef struct {
-	unsigned int filter;
-	IXJ_FILTER_FREQ freq;
-	char enable;
-} IXJ_FILTER;
-
-typedef struct {
-	char enable;
-	char en_filter;
-	unsigned int filter;
-	unsigned int on1;
-	unsigned int off1;
-	unsigned int on2;
-	unsigned int off2;
-	unsigned int on3;
-	unsigned int off3;
-} IXJ_FILTER_CADENCE;
-
-#define IXJCTL_SET_FILTER		_IOW ('q', 0xC7, IXJ_FILTER *)
-#define IXJCTL_SET_FILTER_RAW		_IOW ('q', 0xDD, IXJ_FILTER_RAW *)
-#define IXJCTL_GET_FILTER_HIST		_IOW ('q', 0xC8, int)
-#define IXJCTL_FILTER_CADENCE		_IOW ('q', 0xD6, IXJ_FILTER_CADENCE *)
-#define IXJCTL_PLAY_CID			_IO  ('q', 0xD7)
-/******************************************************************************
-*
-* This IOCTL allows you to reassign values in the tone index table.  The
-* tone table has 32 entries (0 - 31), but the driver only allows entries
-* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
-* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
-* The positions used internally for Call Progress Tones are as follows:
-*    Dial Tone   - 25
-*    Ring Back   - 26
-*    Busy Signal - 27
-*
-* The freq values are calculated as:
-* freq = cos(2 * PI * frequency / 8000)
-*
-* The most commonly needed values are already calculated and listed in the
-* enum IXJ_TONE_FREQ.  Each tone index can have two frequencies with
-* different gains, if you are only using a single frequency set the unused
-* one to 0.
-*
-* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
-* increments.
-*
-******************************************************************************/
-
-typedef enum {
-	hz20 = 0x7ffa,
-	hz50 = 0x7fe5,
-	hz133 = 0x7f4c,
-	hz200 = 0x7e6b,
-	hz261 = 0x7d50,		/* .63 C1  */
-	hz277 = 0x7cfa,		/* .18 CS1 */
-	hz293 = 0x7c9f,		/* .66 D1  */
-	hz300 = 0x7c75,
-	hz311 = 0x7c32,		/* .13 DS1 */
-	hz329 = 0x7bbf,		/* .63 E1  */
-	hz330 = 0x7bb8,
-	hz340 = 0x7b75,
-	hz349 = 0x7b37,		/* .23 F1  */
-	hz350 = 0x7b30,
-	hz360 = 0x7ae9,
-	hz369 = 0x7aa8,		/* .99 FS1 */
-	hz380 = 0x7a56,
-	hz392 = 0x79fa,		/* .00 G1  */
-	hz400 = 0x79bb,
-	hz415 = 0x7941,		/* .30 GS1 */
-	hz420 = 0x7918,
-	hz425 = 0x78ee,
-	hz435 = 0x7899,
-	hz440 = 0x786d,		/* .00 A1  */
-	hz445 = 0x7842,
-	hz450 = 0x7815,
-	hz452 = 0x7803,
-	hz466 = 0x7784,		/* .16 AS1 */
-	hz475 = 0x7731,
-	hz480 = 0x7701,
-	hz493 = 0x7685,		/* .88 B1  */
-	hz494 = 0x767b,
-	hz500 = 0x7640,
-	hz520 = 0x7578,
-	hz523 = 0x7559,		/* .25 C2  */
-	hz525 = 0x7544,
-	hz540 = 0x74a7,
-	hz554 = 0x7411,		/* .37 CS2 */
-	hz587 = 0x72a1,		/* .33 D2  */
-	hz590 = 0x727f,
-	hz600 = 0x720b,
-	hz620 = 0x711e,
-	hz622 = 0x7106,		/* .25 DS2 */
-	hz659 = 0x6f3b,		/* .26 E2  */
-	hz660 = 0x6f2e,
-	hz698 = 0x6d3d,		/* .46 F2  */
-	hz700 = 0x6d22,
-	hz739 = 0x6b09,		/* .99 FS2 */
-	hz740 = 0x6afa,
-	hz750 = 0x6a6c,
-	hz770 = 0x694b,
-	hz783 = 0x688b,		/* .99 G2  */
-	hz800 = 0x678d,
-	hz816 = 0x6698,
-	hz830 = 0x65bf,		/* .61 GS2 */
-	hz850 = 0x6484,
-	hz857 = 0x6414,
-	hz880 = 0x629f,		/* .00 A2  */
-	hz900 = 0x6154,
-	hz932 = 0x5f35,		/* .33 AS2 */
-	hz935 = 0x5f01,
-	hz941 = 0x5e9a,
-	hz942 = 0x5e88,
-	hz950 = 0x5dfd,
-	hz975 = 0x5c44,
-	hz1000 = 0x5a81,
-	hz1020 = 0x5912,
-	hz1050 = 0x56e2,
-	hz1100 = 0x5320,
-	hz1140 = 0x5007,
-	hz1200 = 0x4b3b,
-	hz1209 = 0x4a80,
-	hz1215 = 0x4a02,
-	hz1250 = 0x471c,
-	hz1300 = 0x42e0,
-	hz1330 = 0x4049,
-	hz1336 = 0x3fc4,
-	hz1366 = 0x3d22,
-	hz1380 = 0x3be4,
-	hz1400 = 0x3a1b,
-	hz1450 = 0x3596,
-	hz1477 = 0x331c,
-	hz1500 = 0x30fb,
-	hz1600 = 0x278d,
-	hz1633 = 0x2462,
-	hz1638 = 0x23e7,
-	hz1645 = 0x233a,
-	hz1750 = 0x18f8,
-	hz1800 = 0x1405,
-	hz1860 = 0xe0b,
-	hz2100 = 0xf5f6,
-	hz2130 = 0xf2f5,
-	hz2450 = 0xd3b3,
-	hz2750 = 0xb8e4
-} IXJ_FREQ;
-
-typedef enum {
-	C1 = hz261,
-	CS1 = hz277,
-	D1 = hz293,
-	DS1 = hz311,
-	E1 = hz329,
-	F1 = hz349,
-	FS1 = hz369,
-	G1 = hz392,
-	GS1 = hz415,
-	A1 = hz440,
-	AS1 = hz466,
-	B1 = hz493,
-	C2 = hz523,
-	CS2 = hz554,
-	D2 = hz587,
-	DS2 = hz622,
-	E2 = hz659,
-	F2 = hz698,
-	FS2 = hz739,
-	G2 = hz783,
-	GS2 = hz830,
-	A2 = hz880,
-	AS2 = hz932,
-} IXJ_NOTE;
-
-typedef struct {
-	int tone_index;
-	int freq0;
-	int gain0;
-	int freq1;
-	int gain1;
-} IXJ_TONE;
-
-#define IXJCTL_INIT_TONE		_IOW ('q', 0xC9, IXJ_TONE *)
-
-/******************************************************************************
-*
-* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
-* Call Progress Tones (CPT).  This is accomplished by setting up an array of
-* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
-* the tone sequence.  The tone_on_time and tone_off time are in
-* 250 microsecond intervals.  A pointer to this array is passed to the
-* driver as the ce element of an IXJ_CADENCE structure.  The elements_used
-* must be set to the number of IXJ_CADENCE_ELEMENTS in the array.  The
-* termination variable defines what to do at the end of a cadence, the
-* options are to play the cadence once and stop, to repeat the last
-* element of the cadence indefinitely, or to repeat the entire cadence
-* indefinitely.  The ce variable is a pointer to the array of IXJ_TONE
-* structures.  If the freq0 variable is non-zero, the tone table contents
-* for the tone_index are updated to the frequencies and gains defined.  It
-* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
-* table indexes are used in a cadence the frequency and gain variables will
-* be ignored.
-*
-* If the array elements contain frequency parameters the driver will
-* initialize the needed tone table elements and begin playing the tone,
-* there is no preset limit on the number of elements in the cadence.  If
-* there is more than one frequency used in the cadence, sequential elements
-* of different frequencies MUST use different tone table indexes.  Only one
-* cadence can be played at a time.  It is possible to build complex
-* cadences with multiple frequencies using 2 tone table indexes by
-* alternating between them.
-*
-******************************************************************************/
-
-typedef struct {
-	int index;
-	int tone_on_time;
-	int tone_off_time;
-	int freq0;
-	int gain0;
-	int freq1;
-	int gain1;
-} IXJ_CADENCE_ELEMENT;
-
-typedef enum {
-	PLAY_ONCE,
-	REPEAT_LAST_ELEMENT,
-	REPEAT_ALL
-} IXJ_CADENCE_TERM;
-
-typedef struct {
-	int elements_used;
-	IXJ_CADENCE_TERM termination;
-	IXJ_CADENCE_ELEMENT __user *ce;
-} IXJ_CADENCE;
-
-#define IXJCTL_TONE_CADENCE		_IOW ('q', 0xCA, IXJ_CADENCE *)
-/******************************************************************************
-*
-* This group of IOCTLs deal with the playback settings of the DSP
-*
-******************************************************************************/
-
-#define IXJCTL_PLAY_CODEC               PHONE_PLAY_CODEC
-#define IXJCTL_PLAY_START               PHONE_PLAY_START
-#define IXJCTL_PLAY_STOP                PHONE_PLAY_STOP
-#define IXJCTL_PLAY_DEPTH		PHONE_PLAY_DEPTH
-#define IXJCTL_PLAY_VOLUME		PHONE_PLAY_VOLUME
-#define IXJCTL_PLAY_LEVEL		PHONE_PLAY_LEVEL
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
-* of the DSP
-*
-* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the
-* same effect as IXJCTL_AEC_STOP.  This is to simplify slider bar
-* controls.  IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC.
-******************************************************************************/
-#define IXJCTL_AEC_START		_IOW ('q', 0xCB, int)
-#define IXJCTL_AEC_STOP			_IO  ('q', 0xCC)
-#define IXJCTL_AEC_GET_LEVEL		_IO  ('q', 0xCD)
-
-#define AEC_OFF   0
-#define AEC_LOW   1
-#define AEC_MED   2
-#define AEC_HIGH  3
-#define AEC_AUTO  4
-#define AEC_AGC   5
-/******************************************************************************
-*
-* Call Progress Tones, DTMF, etc.
-* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band
-* only.  If you pass a 1, DTMF is suppressed from the audio stream.
-* Tone on and off times are in 250 microsecond intervals so
-* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
-* will set the tone on time of board ixj1 to 360 * 250us = 90ms
-* the default values of tone on and off times is 840 or 210ms
-******************************************************************************/
-
-#define IXJCTL_DTMF_READY		PHONE_DTMF_READY
-#define IXJCTL_GET_DTMF                 PHONE_GET_DTMF
-#define IXJCTL_GET_DTMF_ASCII           PHONE_GET_DTMF_ASCII
-#define IXJCTL_DTMF_OOB			PHONE_DTMF_OOB
-#define IXJCTL_EXCEPTION		PHONE_EXCEPTION
-#define IXJCTL_PLAY_TONE		PHONE_PLAY_TONE
-#define IXJCTL_SET_TONE_ON_TIME		PHONE_SET_TONE_ON_TIME
-#define IXJCTL_SET_TONE_OFF_TIME	PHONE_SET_TONE_OFF_TIME
-#define IXJCTL_GET_TONE_ON_TIME		PHONE_GET_TONE_ON_TIME
-#define IXJCTL_GET_TONE_OFF_TIME	PHONE_GET_TONE_OFF_TIME
-#define IXJCTL_GET_TONE_STATE		PHONE_GET_TONE_STATE
-#define IXJCTL_BUSY			PHONE_BUSY
-#define IXJCTL_RINGBACK			PHONE_RINGBACK
-#define IXJCTL_DIALTONE			PHONE_DIALTONE
-#define IXJCTL_CPT_STOP			PHONE_CPT_STOP
-
-/******************************************************************************
-* LineJACK specific IOCTLs
-*
-* The lsb 4 bits of the LED argument represent the state of each of the 4
-* LED's on the LineJACK
-******************************************************************************/
-
-#define IXJCTL_SET_LED			_IOW ('q', 0xCE, int)
-#define IXJCTL_MIXER			_IOW ('q', 0xCF, int)
-
-/******************************************************************************
-* 
-* The master volume controls use attenuation with 32 levels from 0 to -62dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-* 
-******************************************************************************/
-#define MIXER_MASTER_L		0x0000
-#define MIXER_MASTER_R		0x0100
-#define ATT00DB			0x00
-#define ATT02DB			0x01
-#define ATT04DB			0x02
-#define ATT06DB			0x03
-#define ATT08DB			0x04
-#define ATT10DB			0x05
-#define ATT12DB			0x06
-#define ATT14DB			0x07
-#define ATT16DB			0x08
-#define ATT18DB			0x09
-#define ATT20DB			0x0A
-#define ATT22DB			0x0B
-#define ATT24DB			0x0C
-#define ATT26DB			0x0D
-#define ATT28DB			0x0E
-#define ATT30DB			0x0F
-#define ATT32DB			0x10
-#define ATT34DB			0x11
-#define ATT36DB			0x12
-#define ATT38DB			0x13
-#define ATT40DB			0x14
-#define ATT42DB			0x15
-#define ATT44DB			0x16
-#define ATT46DB			0x17
-#define ATT48DB			0x18
-#define ATT50DB			0x19
-#define ATT52DB			0x1A
-#define ATT54DB			0x1B
-#define ATT56DB			0x1C
-#define ATT58DB			0x1D
-#define ATT60DB			0x1E
-#define ATT62DB			0x1F
-#define MASTER_MUTE		0x80
-
-/******************************************************************************
-* 
-* The input volume controls use gain with 32 levels from +12dB to -50dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-* 
-******************************************************************************/
-#define MIXER_PORT_CD_L		0x0600
-#define MIXER_PORT_CD_R		0x0700
-#define MIXER_PORT_LINE_IN_L	0x0800
-#define MIXER_PORT_LINE_IN_R	0x0900
-#define MIXER_PORT_POTS_REC	0x0C00
-#define MIXER_PORT_MIC		0x0E00
-
-#define GAIN12DB		0x00
-#define GAIN10DB		0x01
-#define GAIN08DB		0x02
-#define GAIN06DB		0x03
-#define GAIN04DB		0x04
-#define GAIN02DB		0x05
-#define GAIN00DB		0x06
-#define GAIN_02DB		0x07
-#define GAIN_04DB		0x08
-#define GAIN_06DB		0x09
-#define GAIN_08DB		0x0A
-#define GAIN_10DB		0x0B
-#define GAIN_12DB		0x0C
-#define GAIN_14DB		0x0D
-#define GAIN_16DB		0x0E
-#define GAIN_18DB		0x0F
-#define GAIN_20DB		0x10
-#define GAIN_22DB		0x11
-#define GAIN_24DB		0x12
-#define GAIN_26DB		0x13
-#define GAIN_28DB		0x14
-#define GAIN_30DB		0x15
-#define GAIN_32DB		0x16
-#define GAIN_34DB		0x17
-#define GAIN_36DB		0x18
-#define GAIN_38DB		0x19
-#define GAIN_40DB		0x1A
-#define GAIN_42DB		0x1B
-#define GAIN_44DB		0x1C
-#define GAIN_46DB		0x1D
-#define GAIN_48DB		0x1E
-#define GAIN_50DB		0x1F
-#define INPUT_MUTE		0x80
-
-/******************************************************************************
-* 
-* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
-* with steps of 4dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-* 
-******************************************************************************/
-#define MIXER_PORT_POTS_PLAY	0x0F00
-
-#define POTS_ATT_00DB		0x00
-#define POTS_ATT_04DB		0x01
-#define POTS_ATT_08DB		0x02
-#define POTS_ATT_12DB		0x03
-#define POTS_ATT_16DB		0x04
-#define POTS_ATT_20DB		0x05
-#define POTS_ATT_24DB		0x06
-#define POTS_ATT_28DB		0x07
-#define POTS_MUTE		0x80
-
-/******************************************************************************
-* 
-* The DAA controls the interface to the PSTN port.  The driver loads the
-* US coefficients by default, so if you live in a different country you
-* need to load the set for your countries phone system.
-* 
-******************************************************************************/
-#define IXJCTL_DAA_COEFF_SET		_IOW ('q', 0xD0, int)
-
-#define DAA_US 		1	/*PITA 8kHz */
-#define DAA_UK 		2	/*ISAR34 8kHz */
-#define DAA_FRANCE 	3	/* */
-#define DAA_GERMANY	4
-#define DAA_AUSTRALIA	5
-#define DAA_JAPAN	6
-
-/******************************************************************************
-* 
-* Use IXJCTL_PORT to set or query the port the card is set to.  If the
-* argument is set to PORT_QUERY, the return value of the ioctl will
-* indicate which port is currently in use, otherwise it will change the
-* port.
-* 
-******************************************************************************/
-#define IXJCTL_PORT			_IOW ('q', 0xD1, int)
-
-#define PORT_QUERY	0
-#define PORT_POTS	1
-#define PORT_PSTN	2
-#define PORT_SPEAKER	3
-#define PORT_HANDSET	4
-
-#define IXJCTL_PSTN_SET_STATE		PHONE_PSTN_SET_STATE
-#define IXJCTL_PSTN_GET_STATE		PHONE_PSTN_GET_STATE
-
-#define PSTN_ON_HOOK	0
-#define PSTN_RINGING	1
-#define PSTN_OFF_HOOK	2
-#define PSTN_PULSE_DIAL	3
-
-/******************************************************************************
-* 
-* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR), 
-* and the transmit gain (AGX).  OR together the components and pass them
-* as the parameter to IXJCTL_DAA_AGAIN.  The default setting is both at 0dB.
-* 
-******************************************************************************/
-#define IXJCTL_DAA_AGAIN		_IOW ('q', 0xD2, int)
-
-#define AGRR00DB	0x00	/* Analog gain in receive direction 0dB */
-#define AGRR3_5DB	0x10	/* Analog gain in receive direction 3.5dB */
-#define AGRR06DB	0x30	/* Analog gain in receive direction 6dB */
-
-#define AGX00DB		0x00	/* Analog gain in transmit direction 0dB */
-#define AGX_6DB		0x04	/* Analog gain in transmit direction -6dB */
-#define AGX3_5DB	0x08	/* Analog gain in transmit direction 3.5dB */
-#define AGX_2_5B	0x0C	/* Analog gain in transmit direction -2.5dB */
-
-#define IXJCTL_PSTN_LINETEST		_IO  ('q', 0xD3)
-
-#define IXJCTL_CID			_IOR ('q', 0xD4, PHONE_CID *)
-#define IXJCTL_VMWI			_IOR ('q', 0xD8, int)
-#define IXJCTL_CIDCW			_IOW ('q', 0xD9, PHONE_CID *)
-/******************************************************************************
-* 
-* The wink duration is tunable with this ioctl.  The default wink duration  
-* is 320ms.  You do not need to use this ioctl if you do not require a
-* different wink duration.
-* 
-******************************************************************************/
-#define IXJCTL_WINK_DURATION		PHONE_WINK_DURATION
-
-/******************************************************************************
-* 
-* This ioctl will connect the POTS port to the PSTN port on the LineJACK
-* In order for this to work properly the port selection should be set to
-* the PSTN port with IXJCTL_PORT prior to calling this ioctl.  This will
-* enable conference calls between PSTN callers and network callers.
-* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
-* passing a 0 turns it back off.
-* 
-******************************************************************************/
-#define IXJCTL_POTS_PSTN		_IOW ('q', 0xD5, int)
-
-/******************************************************************************
-*
-* IOCTLs added by request.
-*
-* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
-*           /usr/include/asm/param.h, this determines the fundamental
-*           frequency of the clock ticks on your Linux system.  The kernel
-*           must be rebuilt if you change this value, also all modules you
-*           use (except this one) must be recompiled.  The default value
-*           is 100, and you only need to use this IOCTL if you use some
-*           other value.
-*
-*
-* IXJCTL_RATE sets the number of times per second that the driver polls
-*             the DSP.  This value cannot be larger than HZ.  By
-*             increasing both of these values, you may be able to reduce
-*             latency because the max hang time that can exist between the
-*             driver and the DSP will be reduced.
-*
-******************************************************************************/
-
-#define IXJCTL_HZ                       _IOW ('q', 0xE0, int)
-#define IXJCTL_RATE                     _IOW ('q', 0xE1, int)
-#define IXJCTL_FRAMES_READ		_IOR ('q', 0xE2, unsigned long)
-#define IXJCTL_FRAMES_WRITTEN		_IOR ('q', 0xE3, unsigned long)
-#define IXJCTL_READ_WAIT		_IOR ('q', 0xE4, unsigned long)
-#define IXJCTL_WRITE_WAIT		_IOR ('q', 0xE5, unsigned long)
-#define IXJCTL_DRYBUFFER_READ		_IOR ('q', 0xE6, unsigned long)
-#define IXJCTL_DRYBUFFER_CLEAR		_IO  ('q', 0xE7)
-#define IXJCTL_DTMF_PRESCALE		_IOW ('q', 0xE8, int)
-
-/******************************************************************************
-*
-* This ioctl allows the user application to control what events the driver
-* will send signals for, and what signals it will send for which event.
-* By default, if signaling is enabled, all events will send SIGIO when
-* they occur.  To disable signals for an event set the signal to 0.
-*
-******************************************************************************/
-typedef enum {
-	SIG_DTMF_READY,
-	SIG_HOOKSTATE,
-	SIG_FLASH,
-	SIG_PSTN_RING,
-	SIG_CALLER_ID,
-	SIG_PSTN_WINK,
-	SIG_F0, SIG_F1, SIG_F2, SIG_F3,
-	SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3,
-	SIG_READ_READY = 33,
-	SIG_WRITE_READY = 34
-} IXJ_SIGEVENT;
-
-typedef struct {
-	unsigned int event;
-	int signal;
-} IXJ_SIGDEF;
-
-#define IXJCTL_SIGCTL			_IOW ('q', 0xE9, IXJ_SIGDEF *)
-
-/******************************************************************************
-*
-* These ioctls allow the user application to change the gain in the 
-* Smart Cable of the Internet Phone Card.  Sending -1 as a value will cause
-* return value to be the current setting.  Valid values to set are 0x00 - 0x1F
-*
-* 11111 = +12 dB
-* 10111 =   0 dB
-* 00000 = -34.5 dB
-*
-* IXJCTL_SC_RXG sets the Receive gain
-* IXJCTL_SC_TXG sets the Transmit gain
-*
-******************************************************************************/
-#define IXJCTL_SC_RXG			_IOW ('q', 0xEA, int)
-#define IXJCTL_SC_TXG			_IOW ('q', 0xEB, int)
-
-/******************************************************************************
-*
-* The intercom IOCTL's short the output from one card to the input of the
-* other and vice versa (actually done in the DSP read function).  It is only
-* necessary to execute the IOCTL on one card, but it is necessary to have
-* both devices open to be able to detect hook switch changes.  The record
-* codec and rate of each card must match the playback codec and rate of
-* the other card for this to work properly.
-*
-******************************************************************************/
-
-#define IXJCTL_INTERCOM_START 		_IOW ('q', 0xFD, int)
-#define IXJCTL_INTERCOM_STOP  		_IOW ('q', 0xFE, int)
-
-/******************************************************************************
- *
- * new structure for accessing raw filter information
- *
- ******************************************************************************/
-
-typedef struct {
-	unsigned int filter;
-	char enable;
-	unsigned int coeff[19];
-} IXJ_FILTER_RAW;
-
-#endif
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
deleted file mode 100644
index a18b719f49d4..000000000000
--- a/include/linux/jffs2.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * JFFS2 -- Journalling Flash File System, Version 2.
- *
- * Copyright © 2001-2007 Red Hat, Inc.
- * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
- *
- * Created by David Woodhouse <dwmw2@infradead.org>
- *
- * For licensing information, see the file 'LICENCE' in the
- * jffs2 directory.
- */
-
-#ifndef __LINUX_JFFS2_H__
-#define __LINUX_JFFS2_H__
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/* You must include something which defines the C99 uintXX_t types. 
-   We don't do it from here because this file is used in too many
-   different environments. */
-
-/* Values we may expect to find in the 'magic' field */
-#define JFFS2_OLD_MAGIC_BITMASK 0x1984
-#define JFFS2_MAGIC_BITMASK 0x1985
-#define KSAMTIB_CIGAM_2SFFJ 0x8519 /* For detecting wrong-endian fs */
-#define JFFS2_EMPTY_BITMASK 0xffff
-#define JFFS2_DIRTY_BITMASK 0x0000
-
-/* Summary node MAGIC marker */
-#define JFFS2_SUM_MAGIC	0x02851885
-
-/* We only allow a single char for length, and 0xFF is empty flash so
-   we don't want it confused with a real length. Hence max 254.
-*/
-#define JFFS2_MAX_NAME_LEN 254
-
-/* How small can we sensibly write nodes? */
-#define JFFS2_MIN_DATA_LEN 128
-
-#define JFFS2_COMPR_NONE	0x00
-#define JFFS2_COMPR_ZERO	0x01
-#define JFFS2_COMPR_RTIME	0x02
-#define JFFS2_COMPR_RUBINMIPS	0x03
-#define JFFS2_COMPR_COPY	0x04
-#define JFFS2_COMPR_DYNRUBIN	0x05
-#define JFFS2_COMPR_ZLIB	0x06
-#define JFFS2_COMPR_LZO		0x07
-/* Compatibility flags. */
-#define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
-#define JFFS2_NODE_ACCURATE 0x2000
-/* INCOMPAT: Fail to mount the filesystem */
-#define JFFS2_FEATURE_INCOMPAT 0xc000
-/* ROCOMPAT: Mount read-only */
-#define JFFS2_FEATURE_ROCOMPAT 0x8000
-/* RWCOMPAT_COPY: Mount read/write, and copy the node when it's GC'd */
-#define JFFS2_FEATURE_RWCOMPAT_COPY 0x4000
-/* RWCOMPAT_DELETE: Mount read/write, and delete the node when it's GC'd */
-#define JFFS2_FEATURE_RWCOMPAT_DELETE 0x0000
-
-#define JFFS2_NODETYPE_DIRENT (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 1)
-#define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2)
-#define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
-#define JFFS2_NODETYPE_PADDING (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 4)
-
-#define JFFS2_NODETYPE_SUMMARY (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 6)
-
-#define JFFS2_NODETYPE_XATTR (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 8)
-#define JFFS2_NODETYPE_XREF (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 9)
-
-/* XATTR Related */
-#define JFFS2_XPREFIX_USER		1	/* for "user." */
-#define JFFS2_XPREFIX_SECURITY		2	/* for "security." */
-#define JFFS2_XPREFIX_ACL_ACCESS	3	/* for "system.posix_acl_access" */
-#define JFFS2_XPREFIX_ACL_DEFAULT	4	/* for "system.posix_acl_default" */
-#define JFFS2_XPREFIX_TRUSTED		5	/* for "trusted.*" */
-
-#define JFFS2_ACL_VERSION		0x0001
-
-// Maybe later...
-//#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
-//#define JFFS2_NODETYPE_OPTIONS (JFFS2_FEATURE_RWCOMPAT_COPY | JFFS2_NODE_ACCURATE | 4)
-
-
-#define JFFS2_INO_FLAG_PREREAD	  1	/* Do read_inode() for this one at
-					   mount time, don't wait for it to
-					   happen later */
-#define JFFS2_INO_FLAG_USERCOMPR  2	/* User has requested a specific
-					   compression type */
-
-
-/* These can go once we've made sure we've caught all uses without
-   byteswapping */
-
-typedef struct {
-	__u32 v32;
-} __attribute__((packed)) jint32_t;
-
-typedef struct {
-	__u32 m;
-} __attribute__((packed)) jmode_t;
-
-typedef struct {
-	__u16 v16;
-} __attribute__((packed)) jint16_t;
-
-struct jffs2_unknown_node
-{
-	/* All start like this */
-	jint16_t magic;
-	jint16_t nodetype;
-	jint32_t totlen; /* So we can skip over nodes we don't grok */
-	jint32_t hdr_crc;
-};
-
-struct jffs2_raw_dirent
-{
-	jint16_t magic;
-	jint16_t nodetype;	/* == JFFS2_NODETYPE_DIRENT */
-	jint32_t totlen;
-	jint32_t hdr_crc;
-	jint32_t pino;
-	jint32_t version;
-	jint32_t ino; /* == zero for unlink */
-	jint32_t mctime;
-	__u8 nsize;
-	__u8 type;
-	__u8 unused[2];
-	jint32_t node_crc;
-	jint32_t name_crc;
-	__u8 name[0];
-};
-
-/* The JFFS2 raw inode structure: Used for storage on physical media.  */
-/* The uid, gid, atime, mtime and ctime members could be longer, but
-   are left like this for space efficiency. If and when people decide
-   they really need them extended, it's simple enough to add support for
-   a new type of raw node.
-*/
-struct jffs2_raw_inode
-{
-	jint16_t magic;      /* A constant magic number.  */
-	jint16_t nodetype;   /* == JFFS2_NODETYPE_INODE */
-	jint32_t totlen;     /* Total length of this node (inc data, etc.) */
-	jint32_t hdr_crc;
-	jint32_t ino;        /* Inode number.  */
-	jint32_t version;    /* Version number.  */
-	jmode_t mode;       /* The file's type or mode.  */
-	jint16_t uid;        /* The file's owner.  */
-	jint16_t gid;        /* The file's group.  */
-	jint32_t isize;      /* Total resultant size of this inode (used for truncations)  */
-	jint32_t atime;      /* Last access time.  */
-	jint32_t mtime;      /* Last modification time.  */
-	jint32_t ctime;      /* Change time.  */
-	jint32_t offset;     /* Where to begin to write.  */
-	jint32_t csize;      /* (Compressed) data size */
-	jint32_t dsize;	     /* Size of the node's data. (after decompression) */
-	__u8 compr;       /* Compression algorithm used */
-	__u8 usercompr;   /* Compression algorithm requested by the user */
-	jint16_t flags;	     /* See JFFS2_INO_FLAG_* */
-	jint32_t data_crc;   /* CRC for the (compressed) data.  */
-	jint32_t node_crc;   /* CRC for the raw inode (excluding data)  */
-	__u8 data[0];
-};
-
-struct jffs2_raw_xattr {
-	jint16_t magic;
-	jint16_t nodetype;	/* = JFFS2_NODETYPE_XATTR */
-	jint32_t totlen;
-	jint32_t hdr_crc;
-	jint32_t xid;		/* XATTR identifier number */
-	jint32_t version;
-	__u8 xprefix;
-	__u8 name_len;
-	jint16_t value_len;
-	jint32_t data_crc;
-	jint32_t node_crc;
-	__u8 data[0];
-} __attribute__((packed));
-
-struct jffs2_raw_xref
-{
-	jint16_t magic;
-	jint16_t nodetype;	/* = JFFS2_NODETYPE_XREF */
-	jint32_t totlen;
-	jint32_t hdr_crc;
-	jint32_t ino;		/* inode number */
-	jint32_t xid;		/* XATTR identifier number */
-	jint32_t xseqno;	/* xref sequential number */
-	jint32_t node_crc;
-} __attribute__((packed));
-
-struct jffs2_raw_summary
-{
-	jint16_t magic;
-	jint16_t nodetype; 	/* = JFFS2_NODETYPE_SUMMARY */
-	jint32_t totlen;
-	jint32_t hdr_crc;
-	jint32_t sum_num;	/* number of sum entries*/
-	jint32_t cln_mkr;	/* clean marker size, 0 = no cleanmarker */
-	jint32_t padded;	/* sum of the size of padding nodes */
-	jint32_t sum_crc;	/* summary information crc */
-	jint32_t node_crc; 	/* node crc */
-	jint32_t sum[0]; 	/* inode summary info */
-};
-
-union jffs2_node_union
-{
-	struct jffs2_raw_inode i;
-	struct jffs2_raw_dirent d;
-	struct jffs2_raw_xattr x;
-	struct jffs2_raw_xref r;
-	struct jffs2_raw_summary s;
-	struct jffs2_unknown_node u;
-};
-
-/* Data payload for device nodes. */
-union jffs2_device_node {
-	jint16_t old_id;
-	jint32_t new_id;
-};
-
-#endif /* __LINUX_JFFS2_H__ */
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
index 47199b13e0eb..cbf2aa9e93b9 100644
--- a/include/linux/joystick.h
+++ b/include/linux/joystick.h
@@ -1,12 +1,8 @@
-#ifndef _LINUX_JOYSTICK_H
-#define _LINUX_JOYSTICK_H
-
 /*
  *  Copyright (C) 1996-2000 Vojtech Pavlik
  *
  *  Sponsored by SuSE
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,113 +22,11 @@
  * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
  * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
  */
+#ifndef _LINUX_JOYSTICK_H
+#define _LINUX_JOYSTICK_H
 
-#include <linux/types.h>
-#include <linux/input.h>
-
-/*
- * Version
- */
-
-#define JS_VERSION		0x020100
-
-/*
- * Types and constants for reading from /dev/js
- */
-
-#define JS_EVENT_BUTTON		0x01	/* button pressed/released */
-#define JS_EVENT_AXIS		0x02	/* joystick moved */
-#define JS_EVENT_INIT		0x80	/* initial state of device */
-
-struct js_event {
-	__u32 time;	/* event timestamp in milliseconds */
-	__s16 value;	/* value */
-	__u8 type;	/* event type */
-	__u8 number;	/* axis/button number */
-};
-
-/*
- * IOCTL commands for joystick driver
- */
-
-#define JSIOCGVERSION		_IOR('j', 0x01, __u32)				/* get driver version */
-
-#define JSIOCGAXES		_IOR('j', 0x11, __u8)				/* get number of axes */
-#define JSIOCGBUTTONS		_IOR('j', 0x12, __u8)				/* get number of buttons */
-#define JSIOCGNAME(len)		_IOC(_IOC_READ, 'j', 0x13, len)			/* get identifier string */
-
-#define JSIOCSCORR		_IOW('j', 0x21, struct js_corr)			/* set correction values */
-#define JSIOCGCORR		_IOR('j', 0x22, struct js_corr)			/* get correction values */
-
-#define JSIOCSAXMAP		_IOW('j', 0x31, __u8[ABS_CNT])			/* set axis mapping */
-#define JSIOCGAXMAP		_IOR('j', 0x32, __u8[ABS_CNT])			/* get axis mapping */
-#define JSIOCSBTNMAP		_IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1])	/* set button mapping */
-#define JSIOCGBTNMAP		_IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1])	/* get button mapping */
-
-/*
- * Types and constants for get/set correction
- */
-
-#define JS_CORR_NONE		0x00	/* returns raw values */
-#define JS_CORR_BROKEN		0x01	/* broken line */
-
-struct js_corr {
-	__s32 coef[8];
-	__s16 prec;
-	__u16 type;
-};
-
-/*
- * v0.x compatibility definitions
- */
-
-#define JS_RETURN		sizeof(struct JS_DATA_TYPE)
-#define JS_TRUE			1
-#define JS_FALSE		0
-#define JS_X_0			0x01
-#define JS_Y_0			0x02
-#define JS_X_1			0x04
-#define JS_Y_1			0x08
-#define JS_MAX			2
-
-#define JS_DEF_TIMEOUT		0x1300
-#define JS_DEF_CORR		0
-#define JS_DEF_TIMELIMIT	10L
-
-#define JS_SET_CAL		1
-#define JS_GET_CAL		2
-#define JS_SET_TIMEOUT		3
-#define JS_GET_TIMEOUT		4
-#define JS_SET_TIMELIMIT	5
-#define JS_GET_TIMELIMIT	6
-#define JS_GET_ALL		7
-#define JS_SET_ALL		8
-
-struct JS_DATA_TYPE {
-	__s32 buttons;
-	__s32 x;
-	__s32 y;
-};
-
-struct JS_DATA_SAVE_TYPE_32 {
-	__s32 JS_TIMEOUT;
-	__s32 BUSY;
-	__s32 JS_EXPIRETIME;
-	__s32 JS_TIMELIMIT;
-	struct JS_DATA_TYPE JS_SAVE;
-	struct JS_DATA_TYPE JS_CORR;
-};
-
-struct JS_DATA_SAVE_TYPE_64 {
-	__s32 JS_TIMEOUT;
-	__s32 BUSY;
-	__s64 JS_EXPIRETIME;
-	__s64 JS_TIMELIMIT;
-	struct JS_DATA_TYPE JS_SAVE;
-	struct JS_DATA_TYPE JS_CORR;
-};
+#include <uapi/linux/joystick.h>
 
-#ifdef __KERNEL__
 #if BITS_PER_LONG == 64
 #define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_64
 #elif BITS_PER_LONG == 32
@@ -140,6 +34,4 @@ struct JS_DATA_SAVE_TYPE_64 {
 #else
 #error Unexpected BITS_PER_LONG
 #endif
-#endif
-
 #endif /* _LINUX_JOYSTICK_H */
diff --git a/include/linux/kd.h b/include/linux/kd.h
index c36d8476db55..25bd17fad239 100644
--- a/include/linux/kd.h
+++ b/include/linux/kd.h
@@ -1,186 +1,7 @@
 #ifndef _LINUX_KD_H
 #define _LINUX_KD_H
-#include <linux/types.h>
-#include <linux/compiler.h>
 
-/* 0x4B is 'K', to avoid collision with termios and vt */
+#include <uapi/linux/kd.h>
 
-#define GIO_FONT	0x4B60	/* gets font in expanded form */
-#define PIO_FONT	0x4B61	/* use font in expanded form */
-
-#define GIO_FONTX	0x4B6B	/* get font using struct consolefontdesc */
-#define PIO_FONTX	0x4B6C	/* set font using struct consolefontdesc */
-struct consolefontdesc {
-	unsigned short charcount;	/* characters in font (256 or 512) */
-	unsigned short charheight;	/* scan lines per character (1-32) */
-	char __user *chardata;		/* font data in expanded form */
-};
-
-#define PIO_FONTRESET   0x4B6D	/* reset to default font */
-
-#define GIO_CMAP	0x4B70	/* gets colour palette on VGA+ */
-#define PIO_CMAP	0x4B71	/* sets colour palette on VGA+ */
-
-#define KIOCSOUND	0x4B2F	/* start sound generation (0 for off) */
-#define KDMKTONE	0x4B30	/* generate tone */
-
-#define KDGETLED	0x4B31	/* return current led state */
-#define KDSETLED	0x4B32	/* set led state [lights, not flags] */
-#define 	LED_SCR		0x01	/* scroll lock led */
-#define 	LED_NUM		0x02	/* num lock led */
-#define 	LED_CAP		0x04	/* caps lock led */
-
-#define KDGKBTYPE	0x4B33	/* get keyboard type */
-#define 	KB_84		0x01
-#define 	KB_101		0x02 	/* this is what we always answer */
-#define 	KB_OTHER	0x03
-
-#define KDADDIO		0x4B34	/* add i/o port as valid */
-#define KDDELIO		0x4B35	/* del i/o port as valid */
-#define KDENABIO	0x4B36	/* enable i/o to video board */
-#define KDDISABIO	0x4B37	/* disable i/o to video board */
-
-#define KDSETMODE	0x4B3A	/* set text/graphics mode */
-#define		KD_TEXT		0x00
-#define		KD_GRAPHICS	0x01
-#define		KD_TEXT0	0x02	/* obsolete */
-#define		KD_TEXT1	0x03	/* obsolete */
-#define KDGETMODE	0x4B3B	/* get current mode */
-
-#define KDMAPDISP	0x4B3C	/* map display into address space */
-#define KDUNMAPDISP	0x4B3D	/* unmap display from address space */
-
-typedef char scrnmap_t;
-#define		E_TABSZ		256
-#define GIO_SCRNMAP	0x4B40	/* get screen mapping from kernel */
-#define PIO_SCRNMAP	0x4B41	/* put screen mapping table in kernel */
-#define GIO_UNISCRNMAP  0x4B69	/* get full Unicode screen mapping */
-#define PIO_UNISCRNMAP  0x4B6A  /* set full Unicode screen mapping */
-
-#define GIO_UNIMAP	0x4B66	/* get unicode-to-font mapping from kernel */
-struct unipair {
-	unsigned short unicode;
-	unsigned short fontpos;
-};
-struct unimapdesc {
-	unsigned short entry_ct;
-	struct unipair __user *entries;
-};
-#define PIO_UNIMAP	0x4B67	/* put unicode-to-font mapping in kernel */
-#define PIO_UNIMAPCLR	0x4B68	/* clear table, possibly advise hash algorithm */
-struct unimapinit {
-	unsigned short advised_hashsize;  /* 0 if no opinion */
-	unsigned short advised_hashstep;  /* 0 if no opinion */
-	unsigned short advised_hashlevel; /* 0 if no opinion */
-};
-
-#define UNI_DIRECT_BASE 0xF000	/* start of Direct Font Region */
-#define UNI_DIRECT_MASK 0x01FF	/* Direct Font Region bitmask */
-
-#define		K_RAW		0x00
-#define		K_XLATE		0x01
-#define		K_MEDIUMRAW	0x02
-#define		K_UNICODE	0x03
-#define		K_OFF		0x04
-#define KDGKBMODE	0x4B44	/* gets current keyboard mode */
-#define KDSKBMODE	0x4B45	/* sets current keyboard mode */
-
-#define		K_METABIT	0x03
-#define		K_ESCPREFIX	0x04
-#define KDGKBMETA	0x4B62	/* gets meta key handling mode */
-#define KDSKBMETA	0x4B63	/* sets meta key handling mode */
-
-#define		K_SCROLLLOCK	0x01
-#define		K_NUMLOCK	0x02
-#define		K_CAPSLOCK	0x04
-#define	KDGKBLED	0x4B64	/* get led flags (not lights) */
-#define	KDSKBLED	0x4B65	/* set led flags (not lights) */
-
-struct kbentry {
-	unsigned char kb_table;
-	unsigned char kb_index;
-	unsigned short kb_value;
-};
-#define		K_NORMTAB	0x00
-#define		K_SHIFTTAB	0x01
-#define		K_ALTTAB	0x02
-#define		K_ALTSHIFTTAB	0x03
-
-#define KDGKBENT	0x4B46	/* gets one entry in translation table */
-#define KDSKBENT	0x4B47	/* sets one entry in translation table */
-
-struct kbsentry {
-	unsigned char kb_func;
-	unsigned char kb_string[512];
-};
-#define KDGKBSENT	0x4B48	/* gets one function key string entry */
-#define KDSKBSENT	0x4B49	/* sets one function key string entry */
-
-struct kbdiacr {
-        unsigned char diacr, base, result;
-};
-struct kbdiacrs {
-        unsigned int kb_cnt;    /* number of entries in following array */
-	struct kbdiacr kbdiacr[256];    /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACR      0x4B4A  /* read kernel accent table */
-#define KDSKBDIACR      0x4B4B  /* write kernel accent table */
-
-struct kbdiacruc {
-	unsigned int diacr, base, result;
-};
-struct kbdiacrsuc {
-        unsigned int kb_cnt;    /* number of entries in following array */
-	struct kbdiacruc kbdiacruc[256];    /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACRUC    0x4BFA  /* read kernel accent table - UCS */
-#define KDSKBDIACRUC    0x4BFB  /* write kernel accent table - UCS */
-
-struct kbkeycode {
-	unsigned int scancode, keycode;
-};
-#define KDGETKEYCODE	0x4B4C	/* read kernel keycode table entry */
-#define KDSETKEYCODE	0x4B4D	/* write kernel keycode table entry */
-
-#define KDSIGACCEPT	0x4B4E	/* accept kbd generated signals */
-
-struct kbd_repeat {
-	int delay;	/* in msec; <= 0: don't change */
-	int period;	/* in msec; <= 0: don't change */
-			/* earlier this field was misnamed "rate" */
-};
-
-#define KDKBDREP        0x4B52  /* set keyboard delay/repeat rate;
-				 * actually used values are returned */
-
-#define KDFONTOP	0x4B72	/* font operations */
-
-struct console_font_op {
-	unsigned int op;	/* operation code KD_FONT_OP_* */
-	unsigned int flags;	/* KD_FONT_FLAG_* */
-	unsigned int width, height;	/* font size */
-	unsigned int charcount;
-	unsigned char __user *data;	/* font data with height fixed to 32 */
-};
-
-struct console_font {
-	unsigned int width, height;	/* font size */
-	unsigned int charcount;
-	unsigned char *data;	/* font data with height fixed to 32 */
-};
-
-#define KD_FONT_OP_SET		0	/* Set font */
-#define KD_FONT_OP_GET		1	/* Get font */
-#define KD_FONT_OP_SET_DEFAULT	2	/* Set font to default, data points to name / NULL */
-#define KD_FONT_OP_COPY		3	/* Copy from another console */
-
-#define KD_FONT_FLAG_DONT_RECALC 	1	/* Don't recalculate hw charcell size [compat] */
-#ifdef __KERNEL__
 #define KD_FONT_FLAG_OLD		0x80000000	/* Invoked via old interface [compat] */
-#endif
-
-/* note: 0x4B00-0x4B4E all have had a value at some time;
-   don't reuse for the time being */
-/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
-
 #endif /* _LINUX_KD_H */
diff --git a/include/linux/kdev_t.h b/include/linux/kdev_t.h
index 2dacab8beccb..c838abe3ee0a 100644
--- a/include/linux/kdev_t.h
+++ b/include/linux/kdev_t.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_KDEV_T_H
 #define _LINUX_KDEV_T_H
-#ifdef __KERNEL__
+
+#include <uapi/linux/kdev_t.h>
+
 #define MINORBITS	20
 #define MINORMASK	((1U << MINORBITS) - 1)
 
@@ -87,14 +89,4 @@ static inline unsigned sysv_minor(u32 dev)
 	return dev & 0x3ffff;
 }
 
-#else /* __KERNEL__ */
-
-/*
-Some programs want their definitions of MAJOR and MINOR and MKDEV
-from the kernel sources. These must be the externally visible ones.
-*/
-#define MAJOR(dev)	((dev)>>8)
-#define MINOR(dev)	((dev) & 0xff)
-#define MKDEV(ma,mi)	((ma)<<8 | (mi))
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/kernel-page-flags.h b/include/linux/kernel-page-flags.h
index a1bdf6966357..546eb6a76934 100644
--- a/include/linux/kernel-page-flags.h
+++ b/include/linux/kernel-page-flags.h
@@ -1,38 +1,8 @@
 #ifndef LINUX_KERNEL_PAGE_FLAGS_H
 #define LINUX_KERNEL_PAGE_FLAGS_H
 
-/*
- * Stable page flag bits exported to user space
- */
-
-#define KPF_LOCKED		0
-#define KPF_ERROR		1
-#define KPF_REFERENCED		2
-#define KPF_UPTODATE		3
-#define KPF_DIRTY		4
-#define KPF_LRU			5
-#define KPF_ACTIVE		6
-#define KPF_SLAB		7
-#define KPF_WRITEBACK		8
-#define KPF_RECLAIM		9
-#define KPF_BUDDY		10
-
-/* 11-20: new additions in 2.6.31 */
-#define KPF_MMAP		11
-#define KPF_ANON		12
-#define KPF_SWAPCACHE		13
-#define KPF_SWAPBACKED		14
-#define KPF_COMPOUND_HEAD	15
-#define KPF_COMPOUND_TAIL	16
-#define KPF_HUGE		17
-#define KPF_UNEVICTABLE		18
-#define KPF_HWPOISON		19
-#define KPF_NOPAGE		20
+#include <uapi/linux/kernel-page-flags.h>
 
-#define KPF_KSM			21
-#define KPF_THP			22
-
-#ifdef __KERNEL__
 
 /* kernel hacking assistances
  * WARNING: subject to change, never rely on them!
@@ -46,6 +16,4 @@
 #define KPF_ARCH		38
 #define KPF_UNCACHED		39
 
-#endif /* __KERNEL__ */
-
 #endif /* LINUX_KERNEL_PAGE_FLAGS_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 2451f1f7a1d9..a123b13b70fd 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -1,15 +1,6 @@
 #ifndef _LINUX_KERNEL_H
 #define _LINUX_KERNEL_H
 
-#include <linux/sysinfo.h>
-
-/*
- * 'kernel.h' contains some often-used function prototypes etc
- */
-#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
-#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
-
-#ifdef __KERNEL__
 
 #include <stdarg.h>
 #include <linux/linkage.h>
@@ -22,6 +13,7 @@
 #include <linux/printk.h>
 #include <linux/dynamic_debug.h>
 #include <asm/byteorder.h>
+#include <uapi/linux/kernel.h>
 
 #define USHRT_MAX	((u16)(~0U))
 #define SHRT_MAX	((s16)(USHRT_MAX>>1))
@@ -716,6 +708,4 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { }
 
 extern int do_sysinfo(struct sysinfo *info);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h
index 9c2683929fd3..9be37da93680 100644
--- a/include/linux/kernelcapi.h
+++ b/include/linux/kernelcapi.h
@@ -6,49 +6,15 @@
  * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
  * 
  */
-
 #ifndef __KERNELCAPI_H__
 #define __KERNELCAPI_H__
 
-#define CAPI_MAXAPPL	240	/* maximum number of applications  */
-#define CAPI_MAXCONTR	32	/* maximum number of controller    */
-#define CAPI_MAXDATAWINDOW	8
-
-
-typedef struct kcapi_flagdef {
-	int contr;
-	int flag;
-} kcapi_flagdef;
-
-typedef struct kcapi_carddef {
-	char		driver[32];
-	unsigned int	port;
-	unsigned	irq;
-	unsigned int	membase;
-	int		cardnr;
-} kcapi_carddef;
-
-/* new ioctls >= 10 */
-#define KCAPI_CMD_TRACE		10
-#define KCAPI_CMD_ADDCARD	11	/* OBSOLETE */
-
-/* 
- * flag > 2 => trace also data
- * flag & 1 => show trace
- */
-#define KCAPI_TRACE_OFF			0
-#define KCAPI_TRACE_SHORT_NO_DATA	1
-#define KCAPI_TRACE_FULL_NO_DATA	2
-#define KCAPI_TRACE_SHORT		3
-#define KCAPI_TRACE_FULL		4
-
-
-#ifdef __KERNEL__
 
 #include <linux/list.h>
 #include <linux/skbuff.h>
 #include <linux/workqueue.h>
 #include <linux/notifier.h>
+#include <uapi/linux/kernelcapi.h>
 
 struct capi20_appl {
 	u16 applid;
@@ -150,6 +116,4 @@ typedef enum {
 	CapiCallGivenToOtherApplication                 = 0x3304,
 } CAPI_REASON;
 
-#endif				/* __KERNEL__ */
-
 #endif				/* __KERNELCAPI_H__ */
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 37c5f7261142..d0b8458a703a 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -1,57 +1,8 @@
 #ifndef LINUX_KEXEC_H
 #define LINUX_KEXEC_H
 
-/* kexec system call -  It loads the new kernel to boot into.
- * kexec does not sync, or unmount filesystems so if you need
- * that to happen you need to do that yourself.
- */
-
-#include <linux/types.h>
-
-/* kexec flags for different usage scenarios */
-#define KEXEC_ON_CRASH		0x00000001
-#define KEXEC_PRESERVE_CONTEXT	0x00000002
-#define KEXEC_ARCH_MASK		0xffff0000
-
-/* These values match the ELF architecture values.
- * Unless there is a good reason that should continue to be the case.
- */
-#define KEXEC_ARCH_DEFAULT ( 0 << 16)
-#define KEXEC_ARCH_386     ( 3 << 16)
-#define KEXEC_ARCH_X86_64  (62 << 16)
-#define KEXEC_ARCH_PPC     (20 << 16)
-#define KEXEC_ARCH_PPC64   (21 << 16)
-#define KEXEC_ARCH_IA_64   (50 << 16)
-#define KEXEC_ARCH_ARM     (40 << 16)
-#define KEXEC_ARCH_S390    (22 << 16)
-#define KEXEC_ARCH_SH      (42 << 16)
-#define KEXEC_ARCH_MIPS_LE (10 << 16)
-#define KEXEC_ARCH_MIPS    ( 8 << 16)
-
-/* The artificial cap on the number of segments passed to kexec_load. */
-#define KEXEC_SEGMENT_MAX 16
-
-#ifndef __KERNEL__
-/*
- * This structure is used to hold the arguments that are used when
- * loading  kernel binaries.
- */
-struct kexec_segment {
-	const void *buf;
-	size_t bufsz;
-	const void *mem;
-	size_t memsz;
-};
-
-/* Load a new kernel image as described by the kexec_segment array
- * consisting of passed number of segments at the entry-point address.
- * The flags allow different useage types.
- */
-extern int kexec_load(void *, size_t, struct kexec_segment *,
-		unsigned long int);
-#endif /* __KERNEL__ */
+#include <uapi/linux/kexec.h>
 
-#ifdef __KERNEL__
 #ifdef CONFIG_KEXEC
 #include <linux/list.h>
 #include <linux/linkage.h>
@@ -258,5 +209,4 @@ struct task_struct;
 static inline void crash_kexec(struct pt_regs *regs) { }
 static inline int kexec_should_crash(struct task_struct *p) { return 0; }
 #endif /* CONFIG_KEXEC */
-#endif /* __KERNEL__ */
 #endif /* LINUX_KEXEC_H */
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
index 86e5214ae735..131ed5146521 100644
--- a/include/linux/keyboard.h
+++ b/include/linux/keyboard.h
@@ -1,28 +1,8 @@
 #ifndef __LINUX_KEYBOARD_H
 #define __LINUX_KEYBOARD_H
 
-#include <linux/wait.h>
+#include <uapi/linux/keyboard.h>
 
-#define KG_SHIFT	0
-#define KG_CTRL		2
-#define KG_ALT		3
-#define KG_ALTGR	1
-#define KG_SHIFTL	4
-#define KG_KANASHIFT	4
-#define KG_SHIFTR	5
-#define KG_CTRLL	6
-#define KG_CTRLR	7
-#define KG_CAPSSHIFT	8
-
-#define NR_SHIFT	9
-
-#define NR_KEYS		256
-#define MAX_NR_KEYMAPS	256
-/* This means 128Kb if all keymaps are allocated. Only the superuser
-	may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
-#define MAX_NR_OF_USER_KEYMAPS 256 	/* should be at least 7 */
-
-#ifdef __KERNEL__
 struct notifier_block;
 extern unsigned short *key_maps[MAX_NR_KEYMAPS];
 extern unsigned short plain_map[NR_KEYS];
@@ -38,422 +18,3 @@ struct keyboard_notifier_param {
 extern int register_keyboard_notifier(struct notifier_block *nb);
 extern int unregister_keyboard_notifier(struct notifier_block *nb);
 #endif
-
-#define MAX_NR_FUNC	256	/* max nr of strings assigned to keys */
-
-#define KT_LATIN	0	/* we depend on this being zero */
-#define KT_LETTER	11	/* symbol that can be acted upon by CapsLock */
-#define KT_FN		1
-#define KT_SPEC		2
-#define KT_PAD		3
-#define KT_DEAD		4
-#define KT_CONS		5
-#define KT_CUR		6
-#define KT_SHIFT	7
-#define KT_META		8
-#define KT_ASCII	9
-#define KT_LOCK		10
-#define KT_SLOCK	12
-#define KT_DEAD2	13
-#define KT_BRL		14
-
-#define K(t,v)		(((t)<<8)|(v))
-#define KTYP(x)		((x) >> 8)
-#define KVAL(x)		((x) & 0xff)
-
-#define K_F1		K(KT_FN,0)
-#define K_F2		K(KT_FN,1)
-#define K_F3		K(KT_FN,2)
-#define K_F4		K(KT_FN,3)
-#define K_F5		K(KT_FN,4)
-#define K_F6		K(KT_FN,5)
-#define K_F7		K(KT_FN,6)
-#define K_F8		K(KT_FN,7)
-#define K_F9		K(KT_FN,8)
-#define K_F10		K(KT_FN,9)
-#define K_F11		K(KT_FN,10)
-#define K_F12		K(KT_FN,11)
-#define K_F13		K(KT_FN,12)
-#define K_F14		K(KT_FN,13)
-#define K_F15		K(KT_FN,14)
-#define K_F16		K(KT_FN,15)
-#define K_F17		K(KT_FN,16)
-#define K_F18		K(KT_FN,17)
-#define K_F19		K(KT_FN,18)
-#define K_F20		K(KT_FN,19)
-#define K_FIND		K(KT_FN,20)
-#define K_INSERT	K(KT_FN,21)
-#define K_REMOVE	K(KT_FN,22)
-#define K_SELECT	K(KT_FN,23)
-#define K_PGUP		K(KT_FN,24) /* PGUP is a synonym for PRIOR */
-#define K_PGDN		K(KT_FN,25) /* PGDN is a synonym for NEXT */
-#define K_MACRO	 	K(KT_FN,26)
-#define K_HELP		K(KT_FN,27)
-#define K_DO		K(KT_FN,28)
-#define K_PAUSE	 	K(KT_FN,29)
-#define K_F21		K(KT_FN,30)
-#define K_F22		K(KT_FN,31)
-#define K_F23		K(KT_FN,32)
-#define K_F24		K(KT_FN,33)
-#define K_F25		K(KT_FN,34)
-#define K_F26		K(KT_FN,35)
-#define K_F27		K(KT_FN,36)
-#define K_F28		K(KT_FN,37)
-#define K_F29		K(KT_FN,38)
-#define K_F30		K(KT_FN,39)
-#define K_F31		K(KT_FN,40)
-#define K_F32		K(KT_FN,41)
-#define K_F33		K(KT_FN,42)
-#define K_F34		K(KT_FN,43)
-#define K_F35		K(KT_FN,44)
-#define K_F36		K(KT_FN,45)
-#define K_F37		K(KT_FN,46)
-#define K_F38		K(KT_FN,47)
-#define K_F39		K(KT_FN,48)
-#define K_F40		K(KT_FN,49)
-#define K_F41		K(KT_FN,50)
-#define K_F42		K(KT_FN,51)
-#define K_F43		K(KT_FN,52)
-#define K_F44		K(KT_FN,53)
-#define K_F45		K(KT_FN,54)
-#define K_F46		K(KT_FN,55)
-#define K_F47		K(KT_FN,56)
-#define K_F48		K(KT_FN,57)
-#define K_F49		K(KT_FN,58)
-#define K_F50		K(KT_FN,59)
-#define K_F51		K(KT_FN,60)
-#define K_F52		K(KT_FN,61)
-#define K_F53		K(KT_FN,62)
-#define K_F54		K(KT_FN,63)
-#define K_F55		K(KT_FN,64)
-#define K_F56		K(KT_FN,65)
-#define K_F57		K(KT_FN,66)
-#define K_F58		K(KT_FN,67)
-#define K_F59		K(KT_FN,68)
-#define K_F60		K(KT_FN,69)
-#define K_F61		K(KT_FN,70)
-#define K_F62		K(KT_FN,71)
-#define K_F63		K(KT_FN,72)
-#define K_F64		K(KT_FN,73)
-#define K_F65		K(KT_FN,74)
-#define K_F66		K(KT_FN,75)
-#define K_F67		K(KT_FN,76)
-#define K_F68		K(KT_FN,77)
-#define K_F69		K(KT_FN,78)
-#define K_F70		K(KT_FN,79)
-#define K_F71		K(KT_FN,80)
-#define K_F72		K(KT_FN,81)
-#define K_F73		K(KT_FN,82)
-#define K_F74		K(KT_FN,83)
-#define K_F75		K(KT_FN,84)
-#define K_F76		K(KT_FN,85)
-#define K_F77		K(KT_FN,86)
-#define K_F78		K(KT_FN,87)
-#define K_F79		K(KT_FN,88)
-#define K_F80		K(KT_FN,89)
-#define K_F81		K(KT_FN,90)
-#define K_F82		K(KT_FN,91)
-#define K_F83		K(KT_FN,92)
-#define K_F84		K(KT_FN,93)
-#define K_F85		K(KT_FN,94)
-#define K_F86		K(KT_FN,95)
-#define K_F87		K(KT_FN,96)
-#define K_F88		K(KT_FN,97)
-#define K_F89		K(KT_FN,98)
-#define K_F90		K(KT_FN,99)
-#define K_F91		K(KT_FN,100)
-#define K_F92		K(KT_FN,101)
-#define K_F93		K(KT_FN,102)
-#define K_F94		K(KT_FN,103)
-#define K_F95		K(KT_FN,104)
-#define K_F96		K(KT_FN,105)
-#define K_F97		K(KT_FN,106)
-#define K_F98		K(KT_FN,107)
-#define K_F99		K(KT_FN,108)
-#define K_F100		K(KT_FN,109)
-#define K_F101		K(KT_FN,110)
-#define K_F102		K(KT_FN,111)
-#define K_F103		K(KT_FN,112)
-#define K_F104		K(KT_FN,113)
-#define K_F105		K(KT_FN,114)
-#define K_F106		K(KT_FN,115)
-#define K_F107		K(KT_FN,116)
-#define K_F108		K(KT_FN,117)
-#define K_F109		K(KT_FN,118)
-#define K_F110		K(KT_FN,119)
-#define K_F111		K(KT_FN,120)
-#define K_F112		K(KT_FN,121)
-#define K_F113		K(KT_FN,122)
-#define K_F114		K(KT_FN,123)
-#define K_F115		K(KT_FN,124)
-#define K_F116		K(KT_FN,125)
-#define K_F117		K(KT_FN,126)
-#define K_F118		K(KT_FN,127)
-#define K_F119		K(KT_FN,128)
-#define K_F120		K(KT_FN,129)
-#define K_F121		K(KT_FN,130)
-#define K_F122		K(KT_FN,131)
-#define K_F123		K(KT_FN,132)
-#define K_F124		K(KT_FN,133)
-#define K_F125		K(KT_FN,134)
-#define K_F126		K(KT_FN,135)
-#define K_F127		K(KT_FN,136)
-#define K_F128		K(KT_FN,137)
-#define K_F129		K(KT_FN,138)
-#define K_F130		K(KT_FN,139)
-#define K_F131		K(KT_FN,140)
-#define K_F132		K(KT_FN,141)
-#define K_F133		K(KT_FN,142)
-#define K_F134		K(KT_FN,143)
-#define K_F135		K(KT_FN,144)
-#define K_F136		K(KT_FN,145)
-#define K_F137		K(KT_FN,146)
-#define K_F138		K(KT_FN,147)
-#define K_F139		K(KT_FN,148)
-#define K_F140		K(KT_FN,149)
-#define K_F141		K(KT_FN,150)
-#define K_F142		K(KT_FN,151)
-#define K_F143		K(KT_FN,152)
-#define K_F144		K(KT_FN,153)
-#define K_F145		K(KT_FN,154)
-#define K_F146		K(KT_FN,155)
-#define K_F147		K(KT_FN,156)
-#define K_F148		K(KT_FN,157)
-#define K_F149		K(KT_FN,158)
-#define K_F150		K(KT_FN,159)
-#define K_F151		K(KT_FN,160)
-#define K_F152		K(KT_FN,161)
-#define K_F153		K(KT_FN,162)
-#define K_F154		K(KT_FN,163)
-#define K_F155		K(KT_FN,164)
-#define K_F156		K(KT_FN,165)
-#define K_F157		K(KT_FN,166)
-#define K_F158		K(KT_FN,167)
-#define K_F159		K(KT_FN,168)
-#define K_F160		K(KT_FN,169)
-#define K_F161		K(KT_FN,170)
-#define K_F162		K(KT_FN,171)
-#define K_F163		K(KT_FN,172)
-#define K_F164		K(KT_FN,173)
-#define K_F165		K(KT_FN,174)
-#define K_F166		K(KT_FN,175)
-#define K_F167		K(KT_FN,176)
-#define K_F168		K(KT_FN,177)
-#define K_F169		K(KT_FN,178)
-#define K_F170		K(KT_FN,179)
-#define K_F171		K(KT_FN,180)
-#define K_F172		K(KT_FN,181)
-#define K_F173		K(KT_FN,182)
-#define K_F174		K(KT_FN,183)
-#define K_F175		K(KT_FN,184)
-#define K_F176		K(KT_FN,185)
-#define K_F177		K(KT_FN,186)
-#define K_F178		K(KT_FN,187)
-#define K_F179		K(KT_FN,188)
-#define K_F180		K(KT_FN,189)
-#define K_F181		K(KT_FN,190)
-#define K_F182		K(KT_FN,191)
-#define K_F183		K(KT_FN,192)
-#define K_F184		K(KT_FN,193)
-#define K_F185		K(KT_FN,194)
-#define K_F186		K(KT_FN,195)
-#define K_F187		K(KT_FN,196)
-#define K_F188		K(KT_FN,197)
-#define K_F189		K(KT_FN,198)
-#define K_F190		K(KT_FN,199)
-#define K_F191		K(KT_FN,200)
-#define K_F192		K(KT_FN,201)
-#define K_F193		K(KT_FN,202)
-#define K_F194		K(KT_FN,203)
-#define K_F195		K(KT_FN,204)
-#define K_F196		K(KT_FN,205)
-#define K_F197		K(KT_FN,206)
-#define K_F198		K(KT_FN,207)
-#define K_F199		K(KT_FN,208)
-#define K_F200		K(KT_FN,209)
-#define K_F201		K(KT_FN,210)
-#define K_F202		K(KT_FN,211)
-#define K_F203		K(KT_FN,212)
-#define K_F204		K(KT_FN,213)
-#define K_F205		K(KT_FN,214)
-#define K_F206		K(KT_FN,215)
-#define K_F207		K(KT_FN,216)
-#define K_F208		K(KT_FN,217)
-#define K_F209		K(KT_FN,218)
-#define K_F210		K(KT_FN,219)
-#define K_F211		K(KT_FN,220)
-#define K_F212		K(KT_FN,221)
-#define K_F213		K(KT_FN,222)
-#define K_F214		K(KT_FN,223)
-#define K_F215		K(KT_FN,224)
-#define K_F216		K(KT_FN,225)
-#define K_F217		K(KT_FN,226)
-#define K_F218		K(KT_FN,227)
-#define K_F219		K(KT_FN,228)
-#define K_F220		K(KT_FN,229)
-#define K_F221		K(KT_FN,230)
-#define K_F222		K(KT_FN,231)
-#define K_F223		K(KT_FN,232)
-#define K_F224		K(KT_FN,233)
-#define K_F225		K(KT_FN,234)
-#define K_F226		K(KT_FN,235)
-#define K_F227		K(KT_FN,236)
-#define K_F228		K(KT_FN,237)
-#define K_F229		K(KT_FN,238)
-#define K_F230		K(KT_FN,239)
-#define K_F231		K(KT_FN,240)
-#define K_F232		K(KT_FN,241)
-#define K_F233		K(KT_FN,242)
-#define K_F234		K(KT_FN,243)
-#define K_F235		K(KT_FN,244)
-#define K_F236		K(KT_FN,245)
-#define K_F237		K(KT_FN,246)
-#define K_F238		K(KT_FN,247)
-#define K_F239		K(KT_FN,248)
-#define K_F240		K(KT_FN,249)
-#define K_F241		K(KT_FN,250)
-#define K_F242		K(KT_FN,251)
-#define K_F243		K(KT_FN,252)
-#define K_F244		K(KT_FN,253)
-#define K_F245		K(KT_FN,254)
-#define K_UNDO		K(KT_FN,255)
-
-
-#define K_HOLE		K(KT_SPEC,0)
-#define K_ENTER		K(KT_SPEC,1)
-#define K_SH_REGS	K(KT_SPEC,2)
-#define K_SH_MEM	K(KT_SPEC,3)
-#define K_SH_STAT	K(KT_SPEC,4)
-#define K_BREAK		K(KT_SPEC,5)
-#define K_CONS		K(KT_SPEC,6)
-#define K_CAPS		K(KT_SPEC,7)
-#define K_NUM		K(KT_SPEC,8)
-#define K_HOLD		K(KT_SPEC,9)
-#define K_SCROLLFORW	K(KT_SPEC,10)
-#define K_SCROLLBACK	K(KT_SPEC,11)
-#define K_BOOT		K(KT_SPEC,12)
-#define K_CAPSON	K(KT_SPEC,13)
-#define K_COMPOSE	K(KT_SPEC,14)
-#define K_SAK		K(KT_SPEC,15)
-#define K_DECRCONSOLE	K(KT_SPEC,16)
-#define K_INCRCONSOLE	K(KT_SPEC,17)
-#define K_SPAWNCONSOLE	K(KT_SPEC,18)
-#define K_BARENUMLOCK	K(KT_SPEC,19)
-
-#define K_ALLOCATED	K(KT_SPEC,126) /* dynamically allocated keymap */
-#define K_NOSUCHMAP	K(KT_SPEC,127) /* returned by KDGKBENT */
-
-#define K_P0		K(KT_PAD,0)
-#define K_P1		K(KT_PAD,1)
-#define K_P2		K(KT_PAD,2)
-#define K_P3		K(KT_PAD,3)
-#define K_P4		K(KT_PAD,4)
-#define K_P5		K(KT_PAD,5)
-#define K_P6		K(KT_PAD,6)
-#define K_P7		K(KT_PAD,7)
-#define K_P8		K(KT_PAD,8)
-#define K_P9		K(KT_PAD,9)
-#define K_PPLUS		K(KT_PAD,10)	/* key-pad plus */
-#define K_PMINUS	K(KT_PAD,11)	/* key-pad minus */
-#define K_PSTAR		K(KT_PAD,12)	/* key-pad asterisk (star) */
-#define K_PSLASH	K(KT_PAD,13)	/* key-pad slash */
-#define K_PENTER	K(KT_PAD,14)	/* key-pad enter */
-#define K_PCOMMA	K(KT_PAD,15)	/* key-pad comma: kludge... */
-#define K_PDOT		K(KT_PAD,16)	/* key-pad dot (period): kludge... */
-#define K_PPLUSMINUS	K(KT_PAD,17)	/* key-pad plus/minus */
-#define K_PPARENL	K(KT_PAD,18)	/* key-pad left parenthesis */
-#define K_PPARENR	K(KT_PAD,19)	/* key-pad right parenthesis */
-
-#define NR_PAD		20
-
-#define K_DGRAVE	K(KT_DEAD,0)
-#define K_DACUTE	K(KT_DEAD,1)
-#define K_DCIRCM	K(KT_DEAD,2)
-#define K_DTILDE	K(KT_DEAD,3)
-#define K_DDIERE	K(KT_DEAD,4)
-#define K_DCEDIL	K(KT_DEAD,5)
-
-#define NR_DEAD		6
-
-#define K_DOWN		K(KT_CUR,0)
-#define K_LEFT		K(KT_CUR,1)
-#define K_RIGHT		K(KT_CUR,2)
-#define K_UP		K(KT_CUR,3)
-
-#define K_SHIFT		K(KT_SHIFT,KG_SHIFT)
-#define K_CTRL		K(KT_SHIFT,KG_CTRL)
-#define K_ALT		K(KT_SHIFT,KG_ALT)
-#define K_ALTGR		K(KT_SHIFT,KG_ALTGR)
-#define K_SHIFTL	K(KT_SHIFT,KG_SHIFTL)
-#define K_SHIFTR	K(KT_SHIFT,KG_SHIFTR)
-#define K_CTRLL	 	K(KT_SHIFT,KG_CTRLL)
-#define K_CTRLR	 	K(KT_SHIFT,KG_CTRLR)
-#define K_CAPSSHIFT	K(KT_SHIFT,KG_CAPSSHIFT)
-
-#define K_ASC0		K(KT_ASCII,0)
-#define K_ASC1		K(KT_ASCII,1)
-#define K_ASC2		K(KT_ASCII,2)
-#define K_ASC3		K(KT_ASCII,3)
-#define K_ASC4		K(KT_ASCII,4)
-#define K_ASC5		K(KT_ASCII,5)
-#define K_ASC6		K(KT_ASCII,6)
-#define K_ASC7		K(KT_ASCII,7)
-#define K_ASC8		K(KT_ASCII,8)
-#define K_ASC9		K(KT_ASCII,9)
-#define K_HEX0		K(KT_ASCII,10)
-#define K_HEX1		K(KT_ASCII,11)
-#define K_HEX2		K(KT_ASCII,12)
-#define K_HEX3		K(KT_ASCII,13)
-#define K_HEX4		K(KT_ASCII,14)
-#define K_HEX5		K(KT_ASCII,15)
-#define K_HEX6		K(KT_ASCII,16)
-#define K_HEX7		K(KT_ASCII,17)
-#define K_HEX8		K(KT_ASCII,18)
-#define K_HEX9		K(KT_ASCII,19)
-#define K_HEXa		K(KT_ASCII,20)
-#define K_HEXb		K(KT_ASCII,21)
-#define K_HEXc		K(KT_ASCII,22)
-#define K_HEXd		K(KT_ASCII,23)
-#define K_HEXe		K(KT_ASCII,24)
-#define K_HEXf		K(KT_ASCII,25)
-
-#define NR_ASCII	26
-
-#define K_SHIFTLOCK	K(KT_LOCK,KG_SHIFT)
-#define K_CTRLLOCK	K(KT_LOCK,KG_CTRL)
-#define K_ALTLOCK	K(KT_LOCK,KG_ALT)
-#define K_ALTGRLOCK	K(KT_LOCK,KG_ALTGR)
-#define K_SHIFTLLOCK	K(KT_LOCK,KG_SHIFTL)
-#define K_SHIFTRLOCK	K(KT_LOCK,KG_SHIFTR)
-#define K_CTRLLLOCK	K(KT_LOCK,KG_CTRLL)
-#define K_CTRLRLOCK	K(KT_LOCK,KG_CTRLR)
-#define K_CAPSSHIFTLOCK	K(KT_LOCK,KG_CAPSSHIFT)
-
-#define K_SHIFT_SLOCK	K(KT_SLOCK,KG_SHIFT)
-#define K_CTRL_SLOCK	K(KT_SLOCK,KG_CTRL)
-#define K_ALT_SLOCK	K(KT_SLOCK,KG_ALT)
-#define K_ALTGR_SLOCK	K(KT_SLOCK,KG_ALTGR)
-#define K_SHIFTL_SLOCK	K(KT_SLOCK,KG_SHIFTL)
-#define K_SHIFTR_SLOCK	K(KT_SLOCK,KG_SHIFTR)
-#define K_CTRLL_SLOCK	K(KT_SLOCK,KG_CTRLL)
-#define K_CTRLR_SLOCK	K(KT_SLOCK,KG_CTRLR)
-#define K_CAPSSHIFT_SLOCK	K(KT_SLOCK,KG_CAPSSHIFT)
-
-#define NR_LOCK		9
-
-#define K_BRL_BLANK     K(KT_BRL, 0)
-#define K_BRL_DOT1      K(KT_BRL, 1)
-#define K_BRL_DOT2      K(KT_BRL, 2)
-#define K_BRL_DOT3      K(KT_BRL, 3)
-#define K_BRL_DOT4      K(KT_BRL, 4)
-#define K_BRL_DOT5      K(KT_BRL, 5)
-#define K_BRL_DOT6      K(KT_BRL, 6)
-#define K_BRL_DOT7      K(KT_BRL, 7)
-#define K_BRL_DOT8      K(KT_BRL, 8)
-#define K_BRL_DOT9      K(KT_BRL, 9)
-#define K_BRL_DOT10     K(KT_BRL, 10)
-
-#define NR_BRL		11
-
-#define MAX_DIACR	256
-#endif
diff --git a/include/linux/keyctl.h b/include/linux/keyctl.h
deleted file mode 100644
index c9b7f4faf97a..000000000000
--- a/include/linux/keyctl.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* keyctl.h: keyctl command IDs
- *
- * Copyright (C) 2004, 2008 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_KEYCTL_H
-#define _LINUX_KEYCTL_H
-
-/* special process keyring shortcut IDs */
-#define KEY_SPEC_THREAD_KEYRING		-1	/* - key ID for thread-specific keyring */
-#define KEY_SPEC_PROCESS_KEYRING	-2	/* - key ID for process-specific keyring */
-#define KEY_SPEC_SESSION_KEYRING	-3	/* - key ID for session-specific keyring */
-#define KEY_SPEC_USER_KEYRING		-4	/* - key ID for UID-specific keyring */
-#define KEY_SPEC_USER_SESSION_KEYRING	-5	/* - key ID for UID-session keyring */
-#define KEY_SPEC_GROUP_KEYRING		-6	/* - key ID for GID-specific keyring */
-#define KEY_SPEC_REQKEY_AUTH_KEY	-7	/* - key ID for assumed request_key auth key */
-#define KEY_SPEC_REQUESTOR_KEYRING	-8	/* - key ID for request_key() dest keyring */
-
-/* request-key default keyrings */
-#define KEY_REQKEY_DEFL_NO_CHANGE		-1
-#define KEY_REQKEY_DEFL_DEFAULT			0
-#define KEY_REQKEY_DEFL_THREAD_KEYRING		1
-#define KEY_REQKEY_DEFL_PROCESS_KEYRING		2
-#define KEY_REQKEY_DEFL_SESSION_KEYRING		3
-#define KEY_REQKEY_DEFL_USER_KEYRING		4
-#define KEY_REQKEY_DEFL_USER_SESSION_KEYRING	5
-#define KEY_REQKEY_DEFL_GROUP_KEYRING		6
-#define KEY_REQKEY_DEFL_REQUESTOR_KEYRING	7
-
-/* keyctl commands */
-#define KEYCTL_GET_KEYRING_ID		0	/* ask for a keyring's ID */
-#define KEYCTL_JOIN_SESSION_KEYRING	1	/* join or start named session keyring */
-#define KEYCTL_UPDATE			2	/* update a key */
-#define KEYCTL_REVOKE			3	/* revoke a key */
-#define KEYCTL_CHOWN			4	/* set ownership of a key */
-#define KEYCTL_SETPERM			5	/* set perms on a key */
-#define KEYCTL_DESCRIBE			6	/* describe a key */
-#define KEYCTL_CLEAR			7	/* clear contents of a keyring */
-#define KEYCTL_LINK			8	/* link a key into a keyring */
-#define KEYCTL_UNLINK			9	/* unlink a key from a keyring */
-#define KEYCTL_SEARCH			10	/* search for a key in a keyring */
-#define KEYCTL_READ			11	/* read a key or keyring's contents */
-#define KEYCTL_INSTANTIATE		12	/* instantiate a partially constructed key */
-#define KEYCTL_NEGATE			13	/* negate a partially constructed key */
-#define KEYCTL_SET_REQKEY_KEYRING	14	/* set default request-key keyring */
-#define KEYCTL_SET_TIMEOUT		15	/* set key timeout */
-#define KEYCTL_ASSUME_AUTHORITY		16	/* assume request_key() authorisation */
-#define KEYCTL_GET_SECURITY		17	/* get key security label */
-#define KEYCTL_SESSION_TO_PARENT	18	/* apply session keyring to parent process */
-#define KEYCTL_REJECT			19	/* reject a partially constructed key */
-#define KEYCTL_INSTANTIATE_IOV		20	/* instantiate a partially constructed key */
-#define KEYCTL_INVALIDATE		21	/* invalidate a key */
-
-#endif /*  _LINUX_KEYCTL_H */
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
deleted file mode 100644
index 0a6d6ba44c85..000000000000
--- a/include/linux/kvm.h
+++ /dev/null
@@ -1,975 +0,0 @@
-#ifndef __LINUX_KVM_H
-#define __LINUX_KVM_H
-
-/*
- * Userspace interface for /dev/kvm - kernel based virtual machine
- *
- * Note: you must update KVM_API_VERSION if you change this interface.
- */
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <asm/kvm.h>
-
-#define KVM_API_VERSION 12
-
-/* *** Deprecated interfaces *** */
-
-#define KVM_TRC_SHIFT           16
-
-#define KVM_TRC_ENTRYEXIT       (1 << KVM_TRC_SHIFT)
-#define KVM_TRC_HANDLER         (1 << (KVM_TRC_SHIFT + 1))
-
-#define KVM_TRC_VMENTRY         (KVM_TRC_ENTRYEXIT + 0x01)
-#define KVM_TRC_VMEXIT          (KVM_TRC_ENTRYEXIT + 0x02)
-#define KVM_TRC_PAGE_FAULT      (KVM_TRC_HANDLER + 0x01)
-
-#define KVM_TRC_HEAD_SIZE       12
-#define KVM_TRC_CYCLE_SIZE      8
-#define KVM_TRC_EXTRA_MAX       7
-
-#define KVM_TRC_INJ_VIRQ         (KVM_TRC_HANDLER + 0x02)
-#define KVM_TRC_REDELIVER_EVT    (KVM_TRC_HANDLER + 0x03)
-#define KVM_TRC_PEND_INTR        (KVM_TRC_HANDLER + 0x04)
-#define KVM_TRC_IO_READ          (KVM_TRC_HANDLER + 0x05)
-#define KVM_TRC_IO_WRITE         (KVM_TRC_HANDLER + 0x06)
-#define KVM_TRC_CR_READ          (KVM_TRC_HANDLER + 0x07)
-#define KVM_TRC_CR_WRITE         (KVM_TRC_HANDLER + 0x08)
-#define KVM_TRC_DR_READ          (KVM_TRC_HANDLER + 0x09)
-#define KVM_TRC_DR_WRITE         (KVM_TRC_HANDLER + 0x0A)
-#define KVM_TRC_MSR_READ         (KVM_TRC_HANDLER + 0x0B)
-#define KVM_TRC_MSR_WRITE        (KVM_TRC_HANDLER + 0x0C)
-#define KVM_TRC_CPUID            (KVM_TRC_HANDLER + 0x0D)
-#define KVM_TRC_INTR             (KVM_TRC_HANDLER + 0x0E)
-#define KVM_TRC_NMI              (KVM_TRC_HANDLER + 0x0F)
-#define KVM_TRC_VMMCALL          (KVM_TRC_HANDLER + 0x10)
-#define KVM_TRC_HLT              (KVM_TRC_HANDLER + 0x11)
-#define KVM_TRC_CLTS             (KVM_TRC_HANDLER + 0x12)
-#define KVM_TRC_LMSW             (KVM_TRC_HANDLER + 0x13)
-#define KVM_TRC_APIC_ACCESS      (KVM_TRC_HANDLER + 0x14)
-#define KVM_TRC_TDP_FAULT        (KVM_TRC_HANDLER + 0x15)
-#define KVM_TRC_GTLB_WRITE       (KVM_TRC_HANDLER + 0x16)
-#define KVM_TRC_STLB_WRITE       (KVM_TRC_HANDLER + 0x17)
-#define KVM_TRC_STLB_INVAL       (KVM_TRC_HANDLER + 0x18)
-#define KVM_TRC_PPC_INSTR        (KVM_TRC_HANDLER + 0x19)
-
-struct kvm_user_trace_setup {
-	__u32 buf_size;
-	__u32 buf_nr;
-};
-
-#define __KVM_DEPRECATED_MAIN_W_0x06 \
-	_IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
-#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
-#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
-
-#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
-
-struct kvm_breakpoint {
-	__u32 enabled;
-	__u32 padding;
-	__u64 address;
-};
-
-struct kvm_debug_guest {
-	__u32 enabled;
-	__u32 pad;
-	struct kvm_breakpoint breakpoints[4];
-	__u32 singlestep;
-};
-
-#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
-
-/* *** End of deprecated interfaces *** */
-
-
-/* for KVM_CREATE_MEMORY_REGION */
-struct kvm_memory_region {
-	__u32 slot;
-	__u32 flags;
-	__u64 guest_phys_addr;
-	__u64 memory_size; /* bytes */
-};
-
-/* for KVM_SET_USER_MEMORY_REGION */
-struct kvm_userspace_memory_region {
-	__u32 slot;
-	__u32 flags;
-	__u64 guest_phys_addr;
-	__u64 memory_size; /* bytes */
-	__u64 userspace_addr; /* start of the userspace allocated memory */
-};
-
-/*
- * The bit 0 ~ bit 15 of kvm_memory_region::flags are visible for userspace,
- * other bits are reserved for kvm internal use which are defined in
- * include/linux/kvm_host.h.
- */
-#define KVM_MEM_LOG_DIRTY_PAGES	(1UL << 0)
-#define KVM_MEM_READONLY	(1UL << 1)
-
-/* for KVM_IRQ_LINE */
-struct kvm_irq_level {
-	/*
-	 * ACPI gsi notion of irq.
-	 * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
-	 * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
-	 */
-	union {
-		__u32 irq;
-		__s32 status;
-	};
-	__u32 level;
-};
-
-
-struct kvm_irqchip {
-	__u32 chip_id;
-	__u32 pad;
-        union {
-		char dummy[512];  /* reserving space */
-#ifdef __KVM_HAVE_PIT
-		struct kvm_pic_state pic;
-#endif
-#ifdef __KVM_HAVE_IOAPIC
-		struct kvm_ioapic_state ioapic;
-#endif
-	} chip;
-};
-
-/* for KVM_CREATE_PIT2 */
-struct kvm_pit_config {
-	__u32 flags;
-	__u32 pad[15];
-};
-
-#define KVM_PIT_SPEAKER_DUMMY     1
-
-#define KVM_EXIT_UNKNOWN          0
-#define KVM_EXIT_EXCEPTION        1
-#define KVM_EXIT_IO               2
-#define KVM_EXIT_HYPERCALL        3
-#define KVM_EXIT_DEBUG            4
-#define KVM_EXIT_HLT              5
-#define KVM_EXIT_MMIO             6
-#define KVM_EXIT_IRQ_WINDOW_OPEN  7
-#define KVM_EXIT_SHUTDOWN         8
-#define KVM_EXIT_FAIL_ENTRY       9
-#define KVM_EXIT_INTR             10
-#define KVM_EXIT_SET_TPR          11
-#define KVM_EXIT_TPR_ACCESS       12
-#define KVM_EXIT_S390_SIEIC       13
-#define KVM_EXIT_S390_RESET       14
-#define KVM_EXIT_DCR              15
-#define KVM_EXIT_NMI              16
-#define KVM_EXIT_INTERNAL_ERROR   17
-#define KVM_EXIT_OSI              18
-#define KVM_EXIT_PAPR_HCALL	  19
-#define KVM_EXIT_S390_UCONTROL	  20
-
-/* For KVM_EXIT_INTERNAL_ERROR */
-#define KVM_INTERNAL_ERROR_EMULATION 1
-#define KVM_INTERNAL_ERROR_SIMUL_EX 2
-
-/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
-struct kvm_run {
-	/* in */
-	__u8 request_interrupt_window;
-	__u8 padding1[7];
-
-	/* out */
-	__u32 exit_reason;
-	__u8 ready_for_interrupt_injection;
-	__u8 if_flag;
-	__u8 padding2[2];
-
-	/* in (pre_kvm_run), out (post_kvm_run) */
-	__u64 cr8;
-	__u64 apic_base;
-
-#ifdef __KVM_S390
-	/* the processor status word for s390 */
-	__u64 psw_mask; /* psw upper half */
-	__u64 psw_addr; /* psw lower half */
-#endif
-	union {
-		/* KVM_EXIT_UNKNOWN */
-		struct {
-			__u64 hardware_exit_reason;
-		} hw;
-		/* KVM_EXIT_FAIL_ENTRY */
-		struct {
-			__u64 hardware_entry_failure_reason;
-		} fail_entry;
-		/* KVM_EXIT_EXCEPTION */
-		struct {
-			__u32 exception;
-			__u32 error_code;
-		} ex;
-		/* KVM_EXIT_IO */
-		struct {
-#define KVM_EXIT_IO_IN  0
-#define KVM_EXIT_IO_OUT 1
-			__u8 direction;
-			__u8 size; /* bytes */
-			__u16 port;
-			__u32 count;
-			__u64 data_offset; /* relative to kvm_run start */
-		} io;
-		struct {
-			struct kvm_debug_exit_arch arch;
-		} debug;
-		/* KVM_EXIT_MMIO */
-		struct {
-			__u64 phys_addr;
-			__u8  data[8];
-			__u32 len;
-			__u8  is_write;
-		} mmio;
-		/* KVM_EXIT_HYPERCALL */
-		struct {
-			__u64 nr;
-			__u64 args[6];
-			__u64 ret;
-			__u32 longmode;
-			__u32 pad;
-		} hypercall;
-		/* KVM_EXIT_TPR_ACCESS */
-		struct {
-			__u64 rip;
-			__u32 is_write;
-			__u32 pad;
-		} tpr_access;
-		/* KVM_EXIT_S390_SIEIC */
-		struct {
-			__u8 icptcode;
-			__u16 ipa;
-			__u32 ipb;
-		} s390_sieic;
-		/* KVM_EXIT_S390_RESET */
-#define KVM_S390_RESET_POR       1
-#define KVM_S390_RESET_CLEAR     2
-#define KVM_S390_RESET_SUBSYSTEM 4
-#define KVM_S390_RESET_CPU_INIT  8
-#define KVM_S390_RESET_IPL       16
-		__u64 s390_reset_flags;
-		/* KVM_EXIT_S390_UCONTROL */
-		struct {
-			__u64 trans_exc_code;
-			__u32 pgm_code;
-		} s390_ucontrol;
-		/* KVM_EXIT_DCR */
-		struct {
-			__u32 dcrn;
-			__u32 data;
-			__u8  is_write;
-		} dcr;
-		struct {
-			__u32 suberror;
-			/* Available with KVM_CAP_INTERNAL_ERROR_DATA: */
-			__u32 ndata;
-			__u64 data[16];
-		} internal;
-		/* KVM_EXIT_OSI */
-		struct {
-			__u64 gprs[32];
-		} osi;
-		struct {
-			__u64 nr;
-			__u64 ret;
-			__u64 args[9];
-		} papr_hcall;
-		/* Fix the size of the union. */
-		char padding[256];
-	};
-
-	/*
-	 * shared registers between kvm and userspace.
-	 * kvm_valid_regs specifies the register classes set by the host
-	 * kvm_dirty_regs specified the register classes dirtied by userspace
-	 * struct kvm_sync_regs is architecture specific, as well as the
-	 * bits for kvm_valid_regs and kvm_dirty_regs
-	 */
-	__u64 kvm_valid_regs;
-	__u64 kvm_dirty_regs;
-	union {
-		struct kvm_sync_regs regs;
-		char padding[1024];
-	} s;
-};
-
-/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */
-
-struct kvm_coalesced_mmio_zone {
-	__u64 addr;
-	__u32 size;
-	__u32 pad;
-};
-
-struct kvm_coalesced_mmio {
-	__u64 phys_addr;
-	__u32 len;
-	__u32 pad;
-	__u8  data[8];
-};
-
-struct kvm_coalesced_mmio_ring {
-	__u32 first, last;
-	struct kvm_coalesced_mmio coalesced_mmio[0];
-};
-
-#define KVM_COALESCED_MMIO_MAX \
-	((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \
-	 sizeof(struct kvm_coalesced_mmio))
-
-/* for KVM_TRANSLATE */
-struct kvm_translation {
-	/* in */
-	__u64 linear_address;
-
-	/* out */
-	__u64 physical_address;
-	__u8  valid;
-	__u8  writeable;
-	__u8  usermode;
-	__u8  pad[5];
-};
-
-/* for KVM_INTERRUPT */
-struct kvm_interrupt {
-	/* in */
-	__u32 irq;
-};
-
-/* for KVM_GET_DIRTY_LOG */
-struct kvm_dirty_log {
-	__u32 slot;
-	__u32 padding1;
-	union {
-		void __user *dirty_bitmap; /* one bit per page */
-		__u64 padding2;
-	};
-};
-
-/* for KVM_SET_SIGNAL_MASK */
-struct kvm_signal_mask {
-	__u32 len;
-	__u8  sigset[0];
-};
-
-/* for KVM_TPR_ACCESS_REPORTING */
-struct kvm_tpr_access_ctl {
-	__u32 enabled;
-	__u32 flags;
-	__u32 reserved[8];
-};
-
-/* for KVM_SET_VAPIC_ADDR */
-struct kvm_vapic_addr {
-	__u64 vapic_addr;
-};
-
-/* for KVM_SET_MPSTATE */
-
-#define KVM_MP_STATE_RUNNABLE          0
-#define KVM_MP_STATE_UNINITIALIZED     1
-#define KVM_MP_STATE_INIT_RECEIVED     2
-#define KVM_MP_STATE_HALTED            3
-#define KVM_MP_STATE_SIPI_RECEIVED     4
-
-struct kvm_mp_state {
-	__u32 mp_state;
-};
-
-struct kvm_s390_psw {
-	__u64 mask;
-	__u64 addr;
-};
-
-/* valid values for type in kvm_s390_interrupt */
-#define KVM_S390_SIGP_STOP		0xfffe0000u
-#define KVM_S390_PROGRAM_INT		0xfffe0001u
-#define KVM_S390_SIGP_SET_PREFIX	0xfffe0002u
-#define KVM_S390_RESTART		0xfffe0003u
-#define KVM_S390_INT_VIRTIO		0xffff2603u
-#define KVM_S390_INT_SERVICE		0xffff2401u
-#define KVM_S390_INT_EMERGENCY		0xffff1201u
-#define KVM_S390_INT_EXTERNAL_CALL	0xffff1202u
-
-struct kvm_s390_interrupt {
-	__u32 type;
-	__u32 parm;
-	__u64 parm64;
-};
-
-/* for KVM_SET_GUEST_DEBUG */
-
-#define KVM_GUESTDBG_ENABLE		0x00000001
-#define KVM_GUESTDBG_SINGLESTEP		0x00000002
-
-struct kvm_guest_debug {
-	__u32 control;
-	__u32 pad;
-	struct kvm_guest_debug_arch arch;
-};
-
-enum {
-	kvm_ioeventfd_flag_nr_datamatch,
-	kvm_ioeventfd_flag_nr_pio,
-	kvm_ioeventfd_flag_nr_deassign,
-	kvm_ioeventfd_flag_nr_max,
-};
-
-#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
-#define KVM_IOEVENTFD_FLAG_PIO       (1 << kvm_ioeventfd_flag_nr_pio)
-#define KVM_IOEVENTFD_FLAG_DEASSIGN  (1 << kvm_ioeventfd_flag_nr_deassign)
-
-#define KVM_IOEVENTFD_VALID_FLAG_MASK  ((1 << kvm_ioeventfd_flag_nr_max) - 1)
-
-struct kvm_ioeventfd {
-	__u64 datamatch;
-	__u64 addr;        /* legal pio/mmio address */
-	__u32 len;         /* 1, 2, 4, or 8 bytes    */
-	__s32 fd;
-	__u32 flags;
-	__u8  pad[36];
-};
-
-/* for KVM_ENABLE_CAP */
-struct kvm_enable_cap {
-	/* in */
-	__u32 cap;
-	__u32 flags;
-	__u64 args[4];
-	__u8  pad[64];
-};
-
-/* for KVM_PPC_GET_PVINFO */
-struct kvm_ppc_pvinfo {
-	/* out */
-	__u32 flags;
-	__u32 hcall[4];
-	__u8  pad[108];
-};
-
-/* for KVM_PPC_GET_SMMU_INFO */
-#define KVM_PPC_PAGE_SIZES_MAX_SZ	8
-
-struct kvm_ppc_one_page_size {
-	__u32 page_shift;	/* Page shift (or 0) */
-	__u32 pte_enc;		/* Encoding in the HPTE (>>12) */
-};
-
-struct kvm_ppc_one_seg_page_size {
-	__u32 page_shift;	/* Base page shift of segment (or 0) */
-	__u32 slb_enc;		/* SLB encoding for BookS */
-	struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ];
-};
-
-#define KVM_PPC_PAGE_SIZES_REAL		0x00000001
-#define KVM_PPC_1T_SEGMENTS		0x00000002
-
-struct kvm_ppc_smmu_info {
-	__u64 flags;
-	__u32 slb_size;
-	__u32 pad;
-	struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ];
-};
-
-#define KVMIO 0xAE
-
-/* machine type bits, to be used as argument to KVM_CREATE_VM */
-#define KVM_VM_S390_UCONTROL	1
-
-#define KVM_S390_SIE_PAGE_OFFSET 1
-
-/*
- * ioctls for /dev/kvm fds:
- */
-#define KVM_GET_API_VERSION       _IO(KVMIO,   0x00)
-#define KVM_CREATE_VM             _IO(KVMIO,   0x01) /* returns a VM fd */
-#define KVM_GET_MSR_INDEX_LIST    _IOWR(KVMIO, 0x02, struct kvm_msr_list)
-
-#define KVM_S390_ENABLE_SIE       _IO(KVMIO,   0x06)
-/*
- * Check if a kvm extension is available.  Argument is extension number,
- * return is 1 (yes) or 0 (no, sorry).
- */
-#define KVM_CHECK_EXTENSION       _IO(KVMIO,   0x03)
-/*
- * Get size for mmap(vcpu_fd)
- */
-#define KVM_GET_VCPU_MMAP_SIZE    _IO(KVMIO,   0x04) /* in bytes */
-#define KVM_GET_SUPPORTED_CPUID   _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
-#define KVM_TRACE_ENABLE          __KVM_DEPRECATED_MAIN_W_0x06
-#define KVM_TRACE_PAUSE           __KVM_DEPRECATED_MAIN_0x07
-#define KVM_TRACE_DISABLE         __KVM_DEPRECATED_MAIN_0x08
-
-/*
- * Extension capability list.
- */
-#define KVM_CAP_IRQCHIP	  0
-#define KVM_CAP_HLT	  1
-#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2
-#define KVM_CAP_USER_MEMORY 3
-#define KVM_CAP_SET_TSS_ADDR 4
-#define KVM_CAP_VAPIC 6
-#define KVM_CAP_EXT_CPUID 7
-#define KVM_CAP_CLOCKSOURCE 8
-#define KVM_CAP_NR_VCPUS 9       /* returns recommended max vcpus per vm */
-#define KVM_CAP_NR_MEMSLOTS 10   /* returns max memory slots per vm */
-#define KVM_CAP_PIT 11
-#define KVM_CAP_NOP_IO_DELAY 12
-#define KVM_CAP_PV_MMU 13
-#define KVM_CAP_MP_STATE 14
-#define KVM_CAP_COALESCED_MMIO 15
-#define KVM_CAP_SYNC_MMU 16  /* Changes to host mmap are reflected in guest */
-#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
-#define KVM_CAP_DEVICE_ASSIGNMENT 17
-#endif
-#define KVM_CAP_IOMMU 18
-#ifdef __KVM_HAVE_MSI
-#define KVM_CAP_DEVICE_MSI 20
-#endif
-/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
-#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
-#ifdef __KVM_HAVE_USER_NMI
-#define KVM_CAP_USER_NMI 22
-#endif
-#ifdef __KVM_HAVE_GUEST_DEBUG
-#define KVM_CAP_SET_GUEST_DEBUG 23
-#endif
-#ifdef __KVM_HAVE_PIT
-#define KVM_CAP_REINJECT_CONTROL 24
-#endif
-#ifdef __KVM_HAVE_IOAPIC
-#define KVM_CAP_IRQ_ROUTING 25
-#endif
-#define KVM_CAP_IRQ_INJECT_STATUS 26
-#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
-#define KVM_CAP_DEVICE_DEASSIGNMENT 27
-#endif
-#ifdef __KVM_HAVE_MSIX
-#define KVM_CAP_DEVICE_MSIX 28
-#endif
-#define KVM_CAP_ASSIGN_DEV_IRQ 29
-/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
-#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
-#ifdef __KVM_HAVE_MCE
-#define KVM_CAP_MCE 31
-#endif
-#define KVM_CAP_IRQFD 32
-#ifdef __KVM_HAVE_PIT
-#define KVM_CAP_PIT2 33
-#endif
-#define KVM_CAP_SET_BOOT_CPU_ID 34
-#ifdef __KVM_HAVE_PIT_STATE2
-#define KVM_CAP_PIT_STATE2 35
-#endif
-#define KVM_CAP_IOEVENTFD 36
-#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
-#ifdef __KVM_HAVE_XEN_HVM
-#define KVM_CAP_XEN_HVM 38
-#endif
-#define KVM_CAP_ADJUST_CLOCK 39
-#define KVM_CAP_INTERNAL_ERROR_DATA 40
-#ifdef __KVM_HAVE_VCPU_EVENTS
-#define KVM_CAP_VCPU_EVENTS 41
-#endif
-#define KVM_CAP_S390_PSW 42
-#define KVM_CAP_PPC_SEGSTATE 43
-#define KVM_CAP_HYPERV 44
-#define KVM_CAP_HYPERV_VAPIC 45
-#define KVM_CAP_HYPERV_SPIN 46
-#define KVM_CAP_PCI_SEGMENT 47
-#define KVM_CAP_PPC_PAIRED_SINGLES 48
-#define KVM_CAP_INTR_SHADOW 49
-#ifdef __KVM_HAVE_DEBUGREGS
-#define KVM_CAP_DEBUGREGS 50
-#endif
-#define KVM_CAP_X86_ROBUST_SINGLESTEP 51
-#define KVM_CAP_PPC_OSI 52
-#define KVM_CAP_PPC_UNSET_IRQ 53
-#define KVM_CAP_ENABLE_CAP 54
-#ifdef __KVM_HAVE_XSAVE
-#define KVM_CAP_XSAVE 55
-#endif
-#ifdef __KVM_HAVE_XCRS
-#define KVM_CAP_XCRS 56
-#endif
-#define KVM_CAP_PPC_GET_PVINFO 57
-#define KVM_CAP_PPC_IRQ_LEVEL 58
-#define KVM_CAP_ASYNC_PF 59
-#define KVM_CAP_TSC_CONTROL 60
-#define KVM_CAP_GET_TSC_KHZ 61
-#define KVM_CAP_PPC_BOOKE_SREGS 62
-#define KVM_CAP_SPAPR_TCE 63
-#define KVM_CAP_PPC_SMT 64
-#define KVM_CAP_PPC_RMA	65
-#define KVM_CAP_MAX_VCPUS 66       /* returns max vcpus per vm */
-#define KVM_CAP_PPC_HIOR 67
-#define KVM_CAP_PPC_PAPR 68
-#define KVM_CAP_SW_TLB 69
-#define KVM_CAP_ONE_REG 70
-#define KVM_CAP_S390_GMAP 71
-#define KVM_CAP_TSC_DEADLINE_TIMER 72
-#define KVM_CAP_S390_UCONTROL 73
-#define KVM_CAP_SYNC_REGS 74
-#define KVM_CAP_PCI_2_3 75
-#define KVM_CAP_KVMCLOCK_CTRL 76
-#define KVM_CAP_SIGNAL_MSI 77
-#define KVM_CAP_PPC_GET_SMMU_INFO 78
-#define KVM_CAP_S390_COW 79
-#define KVM_CAP_PPC_ALLOC_HTAB 80
-#ifdef __KVM_HAVE_READONLY_MEM
-#define KVM_CAP_READONLY_MEM 81
-#endif
-#define KVM_CAP_IRQFD_RESAMPLE 82
-
-#ifdef KVM_CAP_IRQ_ROUTING
-
-struct kvm_irq_routing_irqchip {
-	__u32 irqchip;
-	__u32 pin;
-};
-
-struct kvm_irq_routing_msi {
-	__u32 address_lo;
-	__u32 address_hi;
-	__u32 data;
-	__u32 pad;
-};
-
-/* gsi routing entry types */
-#define KVM_IRQ_ROUTING_IRQCHIP 1
-#define KVM_IRQ_ROUTING_MSI 2
-
-struct kvm_irq_routing_entry {
-	__u32 gsi;
-	__u32 type;
-	__u32 flags;
-	__u32 pad;
-	union {
-		struct kvm_irq_routing_irqchip irqchip;
-		struct kvm_irq_routing_msi msi;
-		__u32 pad[8];
-	} u;
-};
-
-struct kvm_irq_routing {
-	__u32 nr;
-	__u32 flags;
-	struct kvm_irq_routing_entry entries[0];
-};
-
-#endif
-
-#ifdef KVM_CAP_MCE
-/* x86 MCE */
-struct kvm_x86_mce {
-	__u64 status;
-	__u64 addr;
-	__u64 misc;
-	__u64 mcg_status;
-	__u8 bank;
-	__u8 pad1[7];
-	__u64 pad2[3];
-};
-#endif
-
-#ifdef KVM_CAP_XEN_HVM
-struct kvm_xen_hvm_config {
-	__u32 flags;
-	__u32 msr;
-	__u64 blob_addr_32;
-	__u64 blob_addr_64;
-	__u8 blob_size_32;
-	__u8 blob_size_64;
-	__u8 pad2[30];
-};
-#endif
-
-#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
-/*
- * Available with KVM_CAP_IRQFD_RESAMPLE
- *
- * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
- * the irqfd to operate in resampling mode for level triggered interrupt
- * emlation.  See Documentation/virtual/kvm/api.txt.
- */
-#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
-
-struct kvm_irqfd {
-	__u32 fd;
-	__u32 gsi;
-	__u32 flags;
-	__u32 resamplefd;
-	__u8  pad[16];
-};
-
-struct kvm_clock_data {
-	__u64 clock;
-	__u32 flags;
-	__u32 pad[9];
-};
-
-#define KVM_MMU_FSL_BOOKE_NOHV		0
-#define KVM_MMU_FSL_BOOKE_HV		1
-
-struct kvm_config_tlb {
-	__u64 params;
-	__u64 array;
-	__u32 mmu_type;
-	__u32 array_len;
-};
-
-struct kvm_dirty_tlb {
-	__u64 bitmap;
-	__u32 num_dirty;
-};
-
-/* Available with KVM_CAP_ONE_REG */
-
-#define KVM_REG_ARCH_MASK	0xff00000000000000ULL
-#define KVM_REG_GENERIC		0x0000000000000000ULL
-
-/*
- * Architecture specific registers are to be defined in arch headers and
- * ORed with the arch identifier.
- */
-#define KVM_REG_PPC		0x1000000000000000ULL
-#define KVM_REG_X86		0x2000000000000000ULL
-#define KVM_REG_IA64		0x3000000000000000ULL
-#define KVM_REG_ARM		0x4000000000000000ULL
-#define KVM_REG_S390		0x5000000000000000ULL
-
-#define KVM_REG_SIZE_SHIFT	52
-#define KVM_REG_SIZE_MASK	0x00f0000000000000ULL
-#define KVM_REG_SIZE_U8		0x0000000000000000ULL
-#define KVM_REG_SIZE_U16	0x0010000000000000ULL
-#define KVM_REG_SIZE_U32	0x0020000000000000ULL
-#define KVM_REG_SIZE_U64	0x0030000000000000ULL
-#define KVM_REG_SIZE_U128	0x0040000000000000ULL
-#define KVM_REG_SIZE_U256	0x0050000000000000ULL
-#define KVM_REG_SIZE_U512	0x0060000000000000ULL
-#define KVM_REG_SIZE_U1024	0x0070000000000000ULL
-
-struct kvm_one_reg {
-	__u64 id;
-	__u64 addr;
-};
-
-struct kvm_msi {
-	__u32 address_lo;
-	__u32 address_hi;
-	__u32 data;
-	__u32 flags;
-	__u8  pad[16];
-};
-
-/*
- * ioctls for VM fds
- */
-#define KVM_SET_MEMORY_REGION     _IOW(KVMIO,  0x40, struct kvm_memory_region)
-/*
- * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
- * a vcpu fd.
- */
-#define KVM_CREATE_VCPU           _IO(KVMIO,   0x41)
-#define KVM_GET_DIRTY_LOG         _IOW(KVMIO,  0x42, struct kvm_dirty_log)
-/* KVM_SET_MEMORY_ALIAS is obsolete: */
-#define KVM_SET_MEMORY_ALIAS      _IOW(KVMIO,  0x43, struct kvm_memory_alias)
-#define KVM_SET_NR_MMU_PAGES      _IO(KVMIO,   0x44)
-#define KVM_GET_NR_MMU_PAGES      _IO(KVMIO,   0x45)
-#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
-					struct kvm_userspace_memory_region)
-#define KVM_SET_TSS_ADDR          _IO(KVMIO,   0x47)
-#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO,  0x48, __u64)
-
-/* enable ucontrol for s390 */
-struct kvm_s390_ucas_mapping {
-	__u64 user_addr;
-	__u64 vcpu_addr;
-	__u64 length;
-};
-#define KVM_S390_UCAS_MAP        _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping)
-#define KVM_S390_UCAS_UNMAP      _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping)
-#define KVM_S390_VCPU_FAULT	 _IOW(KVMIO, 0x52, unsigned long)
-
-/* Device model IOC */
-#define KVM_CREATE_IRQCHIP        _IO(KVMIO,   0x60)
-#define KVM_IRQ_LINE              _IOW(KVMIO,  0x61, struct kvm_irq_level)
-#define KVM_GET_IRQCHIP           _IOWR(KVMIO, 0x62, struct kvm_irqchip)
-#define KVM_SET_IRQCHIP           _IOR(KVMIO,  0x63, struct kvm_irqchip)
-#define KVM_CREATE_PIT            _IO(KVMIO,   0x64)
-#define KVM_GET_PIT               _IOWR(KVMIO, 0x65, struct kvm_pit_state)
-#define KVM_SET_PIT               _IOR(KVMIO,  0x66, struct kvm_pit_state)
-#define KVM_IRQ_LINE_STATUS       _IOWR(KVMIO, 0x67, struct kvm_irq_level)
-#define KVM_REGISTER_COALESCED_MMIO \
-			_IOW(KVMIO,  0x67, struct kvm_coalesced_mmio_zone)
-#define KVM_UNREGISTER_COALESCED_MMIO \
-			_IOW(KVMIO,  0x68, struct kvm_coalesced_mmio_zone)
-#define KVM_ASSIGN_PCI_DEVICE     _IOR(KVMIO,  0x69, \
-				       struct kvm_assigned_pci_dev)
-#define KVM_SET_GSI_ROUTING       _IOW(KVMIO,  0x6a, struct kvm_irq_routing)
-/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
-#define KVM_ASSIGN_IRQ            __KVM_DEPRECATED_VM_R_0x70
-#define KVM_ASSIGN_DEV_IRQ        _IOW(KVMIO,  0x70, struct kvm_assigned_irq)
-#define KVM_REINJECT_CONTROL      _IO(KVMIO,   0x71)
-#define KVM_DEASSIGN_PCI_DEVICE   _IOW(KVMIO,  0x72, \
-				       struct kvm_assigned_pci_dev)
-#define KVM_ASSIGN_SET_MSIX_NR    _IOW(KVMIO,  0x73, \
-				       struct kvm_assigned_msix_nr)
-#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO,  0x74, \
-				       struct kvm_assigned_msix_entry)
-#define KVM_DEASSIGN_DEV_IRQ      _IOW(KVMIO,  0x75, struct kvm_assigned_irq)
-#define KVM_IRQFD                 _IOW(KVMIO,  0x76, struct kvm_irqfd)
-#define KVM_CREATE_PIT2		  _IOW(KVMIO,  0x77, struct kvm_pit_config)
-#define KVM_SET_BOOT_CPU_ID       _IO(KVMIO,   0x78)
-#define KVM_IOEVENTFD             _IOW(KVMIO,  0x79, struct kvm_ioeventfd)
-#define KVM_XEN_HVM_CONFIG        _IOW(KVMIO,  0x7a, struct kvm_xen_hvm_config)
-#define KVM_SET_CLOCK             _IOW(KVMIO,  0x7b, struct kvm_clock_data)
-#define KVM_GET_CLOCK             _IOR(KVMIO,  0x7c, struct kvm_clock_data)
-/* Available with KVM_CAP_PIT_STATE2 */
-#define KVM_GET_PIT2              _IOR(KVMIO,  0x9f, struct kvm_pit_state2)
-#define KVM_SET_PIT2              _IOW(KVMIO,  0xa0, struct kvm_pit_state2)
-/* Available with KVM_CAP_PPC_GET_PVINFO */
-#define KVM_PPC_GET_PVINFO	  _IOW(KVMIO,  0xa1, struct kvm_ppc_pvinfo)
-/* Available with KVM_CAP_TSC_CONTROL */
-#define KVM_SET_TSC_KHZ           _IO(KVMIO,  0xa2)
-#define KVM_GET_TSC_KHZ           _IO(KVMIO,  0xa3)
-/* Available with KVM_CAP_PCI_2_3 */
-#define KVM_ASSIGN_SET_INTX_MASK  _IOW(KVMIO,  0xa4, \
-				       struct kvm_assigned_pci_dev)
-/* Available with KVM_CAP_SIGNAL_MSI */
-#define KVM_SIGNAL_MSI            _IOW(KVMIO,  0xa5, struct kvm_msi)
-/* Available with KVM_CAP_PPC_GET_SMMU_INFO */
-#define KVM_PPC_GET_SMMU_INFO	  _IOR(KVMIO,  0xa6, struct kvm_ppc_smmu_info)
-/* Available with KVM_CAP_PPC_ALLOC_HTAB */
-#define KVM_PPC_ALLOCATE_HTAB	  _IOWR(KVMIO, 0xa7, __u32)
-
-/*
- * ioctls for vcpu fds
- */
-#define KVM_RUN                   _IO(KVMIO,   0x80)
-#define KVM_GET_REGS              _IOR(KVMIO,  0x81, struct kvm_regs)
-#define KVM_SET_REGS              _IOW(KVMIO,  0x82, struct kvm_regs)
-#define KVM_GET_SREGS             _IOR(KVMIO,  0x83, struct kvm_sregs)
-#define KVM_SET_SREGS             _IOW(KVMIO,  0x84, struct kvm_sregs)
-#define KVM_TRANSLATE             _IOWR(KVMIO, 0x85, struct kvm_translation)
-#define KVM_INTERRUPT             _IOW(KVMIO,  0x86, struct kvm_interrupt)
-/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
-#define KVM_DEBUG_GUEST           __KVM_DEPRECATED_VCPU_W_0x87
-#define KVM_GET_MSRS              _IOWR(KVMIO, 0x88, struct kvm_msrs)
-#define KVM_SET_MSRS              _IOW(KVMIO,  0x89, struct kvm_msrs)
-#define KVM_SET_CPUID             _IOW(KVMIO,  0x8a, struct kvm_cpuid)
-#define KVM_SET_SIGNAL_MASK       _IOW(KVMIO,  0x8b, struct kvm_signal_mask)
-#define KVM_GET_FPU               _IOR(KVMIO,  0x8c, struct kvm_fpu)
-#define KVM_SET_FPU               _IOW(KVMIO,  0x8d, struct kvm_fpu)
-#define KVM_GET_LAPIC             _IOR(KVMIO,  0x8e, struct kvm_lapic_state)
-#define KVM_SET_LAPIC             _IOW(KVMIO,  0x8f, struct kvm_lapic_state)
-#define KVM_SET_CPUID2            _IOW(KVMIO,  0x90, struct kvm_cpuid2)
-#define KVM_GET_CPUID2            _IOWR(KVMIO, 0x91, struct kvm_cpuid2)
-/* Available with KVM_CAP_VAPIC */
-#define KVM_TPR_ACCESS_REPORTING  _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl)
-/* Available with KVM_CAP_VAPIC */
-#define KVM_SET_VAPIC_ADDR        _IOW(KVMIO,  0x93, struct kvm_vapic_addr)
-/* valid for virtual machine (for floating interrupt)_and_ vcpu */
-#define KVM_S390_INTERRUPT        _IOW(KVMIO,  0x94, struct kvm_s390_interrupt)
-/* store status for s390 */
-#define KVM_S390_STORE_STATUS_NOADDR    (-1ul)
-#define KVM_S390_STORE_STATUS_PREFIXED  (-2ul)
-#define KVM_S390_STORE_STATUS	  _IOW(KVMIO,  0x95, unsigned long)
-/* initial ipl psw for s390 */
-#define KVM_S390_SET_INITIAL_PSW  _IOW(KVMIO,  0x96, struct kvm_s390_psw)
-/* initial reset for s390 */
-#define KVM_S390_INITIAL_RESET    _IO(KVMIO,   0x97)
-#define KVM_GET_MP_STATE          _IOR(KVMIO,  0x98, struct kvm_mp_state)
-#define KVM_SET_MP_STATE          _IOW(KVMIO,  0x99, struct kvm_mp_state)
-/* Available with KVM_CAP_NMI */
-#define KVM_NMI                   _IO(KVMIO,   0x9a)
-/* Available with KVM_CAP_SET_GUEST_DEBUG */
-#define KVM_SET_GUEST_DEBUG       _IOW(KVMIO,  0x9b, struct kvm_guest_debug)
-/* MCE for x86 */
-#define KVM_X86_SETUP_MCE         _IOW(KVMIO,  0x9c, __u64)
-#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO,  0x9d, __u64)
-#define KVM_X86_SET_MCE           _IOW(KVMIO,  0x9e, struct kvm_x86_mce)
-/* IA64 stack access */
-#define KVM_IA64_VCPU_GET_STACK   _IOR(KVMIO,  0x9a, void *)
-#define KVM_IA64_VCPU_SET_STACK   _IOW(KVMIO,  0x9b, void *)
-/* Available with KVM_CAP_VCPU_EVENTS */
-#define KVM_GET_VCPU_EVENTS       _IOR(KVMIO,  0x9f, struct kvm_vcpu_events)
-#define KVM_SET_VCPU_EVENTS       _IOW(KVMIO,  0xa0, struct kvm_vcpu_events)
-/* Available with KVM_CAP_DEBUGREGS */
-#define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
-#define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
-#define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
-/* Available with KVM_CAP_XSAVE */
-#define KVM_GET_XSAVE		  _IOR(KVMIO,  0xa4, struct kvm_xsave)
-#define KVM_SET_XSAVE		  _IOW(KVMIO,  0xa5, struct kvm_xsave)
-/* Available with KVM_CAP_XCRS */
-#define KVM_GET_XCRS		  _IOR(KVMIO,  0xa6, struct kvm_xcrs)
-#define KVM_SET_XCRS		  _IOW(KVMIO,  0xa7, struct kvm_xcrs)
-#define KVM_CREATE_SPAPR_TCE	  _IOW(KVMIO,  0xa8, struct kvm_create_spapr_tce)
-/* Available with KVM_CAP_RMA */
-#define KVM_ALLOCATE_RMA	  _IOR(KVMIO,  0xa9, struct kvm_allocate_rma)
-/* Available with KVM_CAP_SW_TLB */
-#define KVM_DIRTY_TLB		  _IOW(KVMIO,  0xaa, struct kvm_dirty_tlb)
-/* Available with KVM_CAP_ONE_REG */
-#define KVM_GET_ONE_REG		  _IOW(KVMIO,  0xab, struct kvm_one_reg)
-#define KVM_SET_ONE_REG		  _IOW(KVMIO,  0xac, struct kvm_one_reg)
-/* VM is being stopped by host */
-#define KVM_KVMCLOCK_CTRL	  _IO(KVMIO,   0xad)
-
-#define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
-#define KVM_DEV_ASSIGN_PCI_2_3		(1 << 1)
-#define KVM_DEV_ASSIGN_MASK_INTX	(1 << 2)
-
-struct kvm_assigned_pci_dev {
-	__u32 assigned_dev_id;
-	__u32 busnr;
-	__u32 devfn;
-	__u32 flags;
-	__u32 segnr;
-	union {
-		__u32 reserved[11];
-	};
-};
-
-#define KVM_DEV_IRQ_HOST_INTX    (1 << 0)
-#define KVM_DEV_IRQ_HOST_MSI     (1 << 1)
-#define KVM_DEV_IRQ_HOST_MSIX    (1 << 2)
-
-#define KVM_DEV_IRQ_GUEST_INTX   (1 << 8)
-#define KVM_DEV_IRQ_GUEST_MSI    (1 << 9)
-#define KVM_DEV_IRQ_GUEST_MSIX   (1 << 10)
-
-#define KVM_DEV_IRQ_HOST_MASK	 0x00ff
-#define KVM_DEV_IRQ_GUEST_MASK   0xff00
-
-struct kvm_assigned_irq {
-	__u32 assigned_dev_id;
-	__u32 host_irq; /* ignored (legacy field) */
-	__u32 guest_irq;
-	__u32 flags;
-	union {
-		__u32 reserved[12];
-	};
-};
-
-struct kvm_assigned_msix_nr {
-	__u32 assigned_dev_id;
-	__u16 entry_nr;
-	__u16 padding;
-};
-
-#define KVM_MAX_MSIX_PER_DEV		256
-struct kvm_assigned_msix_entry {
-	__u32 assigned_dev_id;
-	__u32 gsi;
-	__u16 entry; /* The index of entry in the MSI-X table */
-	__u16 padding[3];
-};
-
-#endif /* __LINUX_KVM_H */
diff --git a/include/linux/kvm_para.h b/include/linux/kvm_para.h
index ff476ddaf310..00a97bb905db 100644
--- a/include/linux/kvm_para.h
+++ b/include/linux/kvm_para.h
@@ -1,31 +1,8 @@
 #ifndef __LINUX_KVM_PARA_H
 #define __LINUX_KVM_PARA_H
 
-/*
- * This header file provides a method for making a hypercall to the host
- * Architectures should define:
- * - kvm_hypercall0, kvm_hypercall1...
- * - kvm_arch_para_features
- * - kvm_para_available
- */
+#include <uapi/linux/kvm_para.h>
 
-/* Return values for hypercalls */
-#define KVM_ENOSYS		1000
-#define KVM_EFAULT		EFAULT
-#define KVM_E2BIG		E2BIG
-#define KVM_EPERM		EPERM
-
-#define KVM_HC_VAPIC_POLL_IRQ		1
-#define KVM_HC_MMU_OP			2
-#define KVM_HC_FEATURES			3
-#define KVM_HC_PPC_MAP_MAGIC_PAGE	4
-
-/*
- * hypercalls use architecture specific
- */
-#include <asm/kvm_para.h>
-
-#ifdef __KERNEL__
 
 static inline int kvm_para_has_feature(unsigned int feature)
 {
@@ -33,5 +10,4 @@ static inline int kvm_para_has_feature(unsigned int feature)
 		return 1;
 	return 0;
 }
-#endif /* __KERNEL__ */
 #endif /* __LINUX_KVM_PARA_H */
diff --git a/include/linux/l2tp.h b/include/linux/l2tp.h
index 7eab668f60f3..bffdb962f1a6 100644
--- a/include/linux/l2tp.h
+++ b/include/linux/l2tp.h
@@ -3,181 +3,11 @@
  *
  * Author: James Chapman <jchapman@katalix.com>
  */
-
 #ifndef _LINUX_L2TP_H_
 #define _LINUX_L2TP_H_
 
-#include <linux/types.h>
-#include <linux/socket.h>
-#ifdef __KERNEL__
 #include <linux/in.h>
 #include <linux/in6.h>
-#else
-#include <netinet/in.h>
-#endif
-
-#define IPPROTO_L2TP		115
-
-/**
- * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets
- * @l2tp_family:  address family number AF_L2TPIP.
- * @l2tp_addr:    protocol specific address information
- * @l2tp_conn_id: connection id of tunnel
- */
-#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
-struct sockaddr_l2tpip {
-	/* The first fields must match struct sockaddr_in */
-	__kernel_sa_family_t l2tp_family; /* AF_INET */
-	__be16		l2tp_unused;	/* INET port number (unused) */
-	struct in_addr	l2tp_addr;	/* Internet address */
-
-	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
-
-	/* Pad to size of `struct sockaddr'. */
-	unsigned char	__pad[sizeof(struct sockaddr) -
-			      sizeof(__kernel_sa_family_t) -
-			      sizeof(__be16) - sizeof(struct in_addr) -
-			      sizeof(__u32)];
-};
-
-/**
- * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets
- * @l2tp_family:  address family number AF_L2TPIP.
- * @l2tp_addr:    protocol specific address information
- * @l2tp_conn_id: connection id of tunnel
- */
-struct sockaddr_l2tpip6 {
-	/* The first fields must match struct sockaddr_in6 */
-	__kernel_sa_family_t l2tp_family; /* AF_INET6 */
-	__be16		l2tp_unused;	/* INET port number (unused) */
-	__be32		l2tp_flowinfo;	/* IPv6 flow information */
-	struct in6_addr	l2tp_addr;	/* IPv6 address */
-	__u32		l2tp_scope_id;	/* scope id (new in RFC2553) */
-	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
-};
-
-/*****************************************************************************
- *  NETLINK_GENERIC netlink family.
- *****************************************************************************/
-
-/*
- * Commands.
- * Valid TLVs of each command are:-
- * TUNNEL_CREATE	- CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid
- * TUNNEL_DELETE	- CONN_ID
- * TUNNEL_MODIFY	- CONN_ID, udpcsum
- * TUNNEL_GETSTATS	- CONN_ID, (stats)
- * TUNNEL_GET		- CONN_ID, (...)
- * SESSION_CREATE	- SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec
- * SESSION_DELETE	- SESSION_ID
- * SESSION_MODIFY	- SESSION_ID, data_seq
- * SESSION_GET		- SESSION_ID, (...)
- * SESSION_GETSTATS	- SESSION_ID, (stats)
- *
- */
-enum {
-	L2TP_CMD_NOOP,
-	L2TP_CMD_TUNNEL_CREATE,
-	L2TP_CMD_TUNNEL_DELETE,
-	L2TP_CMD_TUNNEL_MODIFY,
-	L2TP_CMD_TUNNEL_GET,
-	L2TP_CMD_SESSION_CREATE,
-	L2TP_CMD_SESSION_DELETE,
-	L2TP_CMD_SESSION_MODIFY,
-	L2TP_CMD_SESSION_GET,
-	__L2TP_CMD_MAX,
-};
-
-#define L2TP_CMD_MAX			(__L2TP_CMD_MAX - 1)
-
-/*
- * ATTR types defined for L2TP
- */
-enum {
-	L2TP_ATTR_NONE,			/* no data */
-	L2TP_ATTR_PW_TYPE,		/* u16, enum l2tp_pwtype */
-	L2TP_ATTR_ENCAP_TYPE,		/* u16, enum l2tp_encap_type */
-	L2TP_ATTR_OFFSET,		/* u16 */
-	L2TP_ATTR_DATA_SEQ,		/* u16 */
-	L2TP_ATTR_L2SPEC_TYPE,		/* u8, enum l2tp_l2spec_type */
-	L2TP_ATTR_L2SPEC_LEN,		/* u8, enum l2tp_l2spec_type */
-	L2TP_ATTR_PROTO_VERSION,	/* u8 */
-	L2TP_ATTR_IFNAME,		/* string */
-	L2TP_ATTR_CONN_ID,		/* u32 */
-	L2TP_ATTR_PEER_CONN_ID,		/* u32 */
-	L2TP_ATTR_SESSION_ID,		/* u32 */
-	L2TP_ATTR_PEER_SESSION_ID,	/* u32 */
-	L2TP_ATTR_UDP_CSUM,		/* u8 */
-	L2TP_ATTR_VLAN_ID,		/* u16 */
-	L2TP_ATTR_COOKIE,		/* 0, 4 or 8 bytes */
-	L2TP_ATTR_PEER_COOKIE,		/* 0, 4 or 8 bytes */
-	L2TP_ATTR_DEBUG,		/* u32 */
-	L2TP_ATTR_RECV_SEQ,		/* u8 */
-	L2TP_ATTR_SEND_SEQ,		/* u8 */
-	L2TP_ATTR_LNS_MODE,		/* u8 */
-	L2TP_ATTR_USING_IPSEC,		/* u8 */
-	L2TP_ATTR_RECV_TIMEOUT,		/* msec */
-	L2TP_ATTR_FD,			/* int */
-	L2TP_ATTR_IP_SADDR,		/* u32 */
-	L2TP_ATTR_IP_DADDR,		/* u32 */
-	L2TP_ATTR_UDP_SPORT,		/* u16 */
-	L2TP_ATTR_UDP_DPORT,		/* u16 */
-	L2TP_ATTR_MTU,			/* u16 */
-	L2TP_ATTR_MRU,			/* u16 */
-	L2TP_ATTR_STATS,		/* nested */
-	L2TP_ATTR_IP6_SADDR,		/* struct in6_addr */
-	L2TP_ATTR_IP6_DADDR,		/* struct in6_addr */
-	__L2TP_ATTR_MAX,
-};
-
-#define L2TP_ATTR_MAX			(__L2TP_ATTR_MAX - 1)
-
-/* Nested in L2TP_ATTR_STATS */
-enum {
-	L2TP_ATTR_STATS_NONE,		/* no data */
-	L2TP_ATTR_TX_PACKETS,		/* u64 */
-	L2TP_ATTR_TX_BYTES,		/* u64 */
-	L2TP_ATTR_TX_ERRORS,		/* u64 */
-	L2TP_ATTR_RX_PACKETS,		/* u64 */
-	L2TP_ATTR_RX_BYTES,		/* u64 */
-	L2TP_ATTR_RX_SEQ_DISCARDS,	/* u64 */
-	L2TP_ATTR_RX_OOS_PACKETS,	/* u64 */
-	L2TP_ATTR_RX_ERRORS,		/* u64 */
-	__L2TP_ATTR_STATS_MAX,
-};
-
-#define L2TP_ATTR_STATS_MAX		(__L2TP_ATTR_STATS_MAX - 1)
-
-enum l2tp_pwtype {
-	L2TP_PWTYPE_NONE = 0x0000,
-	L2TP_PWTYPE_ETH_VLAN = 0x0004,
-	L2TP_PWTYPE_ETH = 0x0005,
-	L2TP_PWTYPE_PPP = 0x0007,
-	L2TP_PWTYPE_PPP_AC = 0x0008,
-	L2TP_PWTYPE_IP = 0x000b,
-	__L2TP_PWTYPE_MAX
-};
-
-enum l2tp_l2spec_type {
-	L2TP_L2SPECTYPE_NONE,
-	L2TP_L2SPECTYPE_DEFAULT,
-};
-
-enum l2tp_encap_type {
-	L2TP_ENCAPTYPE_UDP,
-	L2TP_ENCAPTYPE_IP,
-};
-
-enum l2tp_seqmode {
-	L2TP_SEQ_NONE = 0,
-	L2TP_SEQ_IP = 1,
-	L2TP_SEQ_ALL = 2,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define L2TP_GENL_NAME		"l2tp"
-#define L2TP_GENL_VERSION	0x1
+#include <uapi/linux/l2tp.h>
 
 #endif
diff --git a/include/linux/limits.h b/include/linux/limits.h
deleted file mode 100644
index 2d0f94162fb3..000000000000
--- a/include/linux/limits.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _LINUX_LIMITS_H
-#define _LINUX_LIMITS_H
-
-#define NR_OPEN	        1024
-
-#define NGROUPS_MAX    65536	/* supplemental group IDs are available */
-#define ARG_MAX       131072	/* # bytes of args + environ for exec() */
-#define LINK_MAX         127	/* # links a file may have */
-#define MAX_CANON        255	/* size of the canonical input queue */
-#define MAX_INPUT        255	/* size of the type-ahead buffer */
-#define NAME_MAX         255	/* # chars in a file name */
-#define PATH_MAX        4096	/* # chars in a path name including nul */
-#define PIPE_BUF        4096	/* # bytes in atomic write to a pipe */
-#define XATTR_NAME_MAX   255	/* # chars in an extended attribute name */
-#define XATTR_SIZE_MAX 65536	/* size of an extended attribute value (64k) */
-#define XATTR_LIST_MAX 65536	/* size of extended attribute namelist (64k) */
-
-#define RTSIG_MAX	  32
-
-#endif
diff --git a/include/linux/llc.h b/include/linux/llc.h
index a2418ae13ee9..b965314d017f 100644
--- a/include/linux/llc.h
+++ b/include/linux/llc.h
@@ -1,5 +1,3 @@
-#ifndef __LINUX_LLC_H
-#define __LINUX_LLC_H
 /*
  * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
  *
@@ -12,80 +10,14 @@
  *
  * See the GNU General Public License for more details.
  */
+#ifndef __LINUX_LLC_H
+#define __LINUX_LLC_H
 
-#include <linux/socket.h>
-
-#define __LLC_SOCK_SIZE__ 16	/* sizeof(sockaddr_llc), word align. */
-struct sockaddr_llc {
-	__kernel_sa_family_t sllc_family; /* AF_LLC */
-	__kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
-	unsigned char   sllc_test;
-	unsigned char   sllc_xid;
-	unsigned char	sllc_ua;	/* UA data, only for SOCK_STREAM. */
-	unsigned char   sllc_sap;
-	unsigned char   sllc_mac[IFHWADDRLEN];
-	unsigned char   __pad[__LLC_SOCK_SIZE__ -
-			      sizeof(__kernel_sa_family_t) * 2 -
-			      sizeof(unsigned char) * 4 - IFHWADDRLEN];
-};
-
-/* sockopt definitions. */
-enum llc_sockopts {
-	LLC_OPT_UNKNOWN = 0,
-	LLC_OPT_RETRY,		/* max retrans attempts. */
-	LLC_OPT_SIZE,		/* max PDU size (octets). */
-	LLC_OPT_ACK_TMR_EXP,	/* ack expire time (secs). */
-	LLC_OPT_P_TMR_EXP,	/* pf cycle expire time (secs). */
-	LLC_OPT_REJ_TMR_EXP,	/* rej sent expire time (secs). */
-	LLC_OPT_BUSY_TMR_EXP,	/* busy state expire time (secs). */
-	LLC_OPT_TX_WIN,		/* tx window size. */
-	LLC_OPT_RX_WIN,		/* rx window size. */
-	LLC_OPT_PKTINFO,	/* ancillary packet information. */
-	LLC_OPT_MAX
-};
-
-#define LLC_OPT_MAX_RETRY	 100
-#define LLC_OPT_MAX_SIZE	4196
-#define LLC_OPT_MAX_WIN		 127
-#define LLC_OPT_MAX_ACK_TMR_EXP	  60
-#define LLC_OPT_MAX_P_TMR_EXP	  60
-#define LLC_OPT_MAX_REJ_TMR_EXP	  60
-#define LLC_OPT_MAX_BUSY_TMR_EXP  60
-
-/* LLC SAP types. */
-#define LLC_SAP_NULL	0x00		/* NULL SAP. 			*/
-#define LLC_SAP_LLC	0x02		/* LLC Sublayer Management. 	*/
-#define LLC_SAP_SNA	0x04		/* SNA Path Control. 		*/
-#define LLC_SAP_PNM	0x0E		/* Proway Network Management.	*/	
-#define LLC_SAP_IP	0x06		/* TCP/IP. 			*/
-#define LLC_SAP_BSPAN	0x42		/* Bridge Spanning Tree Proto	*/
-#define LLC_SAP_MMS	0x4E		/* Manufacturing Message Srv.	*/
-#define LLC_SAP_8208	0x7E		/* ISO 8208			*/
-#define LLC_SAP_3COM	0x80		/* 3COM. 			*/
-#define LLC_SAP_PRO	0x8E		/* Proway Active Station List	*/
-#define LLC_SAP_SNAP	0xAA		/* SNAP. 			*/
-#define LLC_SAP_BANYAN	0xBC		/* Banyan. 			*/
-#define LLC_SAP_IPX	0xE0		/* IPX/SPX. 			*/
-#define LLC_SAP_NETBEUI	0xF0		/* NetBEUI. 			*/
-#define LLC_SAP_LANMGR	0xF4		/* LanManager. 			*/
-#define LLC_SAP_IMPL	0xF8		/* IMPL				*/
-#define LLC_SAP_DISC	0xFC		/* Discovery			*/
-#define LLC_SAP_OSI	0xFE		/* OSI Network Layers. 		*/
-#define LLC_SAP_LAR	0xDC		/* LAN Address Resolution 	*/
-#define LLC_SAP_RM	0xD4		/* Resource Management 		*/
-#define LLC_SAP_GLOBAL	0xFF		/* Global SAP. 			*/
-
-struct llc_pktinfo {
-	int lpi_ifindex;
-	unsigned char lpi_sap;
-	unsigned char lpi_mac[IFHWADDRLEN];
-};
+#include <uapi/linux/llc.h>
 
-#ifdef __KERNEL__
 #define LLC_SAP_DYN_START	0xC0
 #define LLC_SAP_DYN_STOP	0xDE
 #define LLC_SAP_DYN_TRIES	4
 
 #define llc_ui_skb_cb(__skb) ((struct sockaddr_llc *)&((__skb)->cb[0]))
-#endif /* __KERNEL__ */
 #endif /* __LINUX_LLC_H */
diff --git a/include/linux/loop.h b/include/linux/loop.h
index 9635116dd830..6492181bcb1d 100644
--- a/include/linux/loop.h
+++ b/include/linux/loop.h
@@ -1,6 +1,3 @@
-#ifndef _LINUX_LOOP_H
-#define _LINUX_LOOP_H
-
 /*
  * include/linux/loop.h
  *
@@ -9,15 +6,14 @@
  * Copyright 1993 by Theodore Ts'o.  Redistribution of this file is
  * permitted under the GNU General Public License.
  */
+#ifndef _LINUX_LOOP_H
+#define _LINUX_LOOP_H
 
-#define LO_NAME_SIZE	64
-#define LO_KEY_SIZE	32
-
-#ifdef __KERNEL__
 #include <linux/bio.h>
 #include <linux/blkdev.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
+#include <uapi/linux/loop.h>
 
 /* Possible states of device */
 enum {
@@ -66,69 +62,6 @@ struct loop_device {
 	struct gendisk		*lo_disk;
 };
 
-#endif /* __KERNEL__ */
-
-/*
- * Loop flags
- */
-enum {
-	LO_FLAGS_READ_ONLY	= 1,
-	LO_FLAGS_AUTOCLEAR	= 4,
-	LO_FLAGS_PARTSCAN	= 8,
-};
-
-#include <asm/posix_types.h>	/* for __kernel_old_dev_t */
-#include <linux/types.h>	/* for __u64 */
-
-/* Backwards compatibility version */
-struct loop_info {
-	int		   lo_number;		/* ioctl r/o */
-	__kernel_old_dev_t lo_device; 		/* ioctl r/o */
-	unsigned long	   lo_inode; 		/* ioctl r/o */
-	__kernel_old_dev_t lo_rdevice; 		/* ioctl r/o */
-	int		   lo_offset;
-	int		   lo_encrypt_type;
-	int		   lo_encrypt_key_size; 	/* ioctl w/o */
-	int		   lo_flags;			/* ioctl r/o */
-	char		   lo_name[LO_NAME_SIZE];
-	unsigned char	   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	unsigned long	   lo_init[2];
-	char		   reserved[4];
-};
-
-struct loop_info64 {
-	__u64		   lo_device;			/* ioctl r/o */
-	__u64		   lo_inode;			/* ioctl r/o */
-	__u64		   lo_rdevice;			/* ioctl r/o */
-	__u64		   lo_offset;
-	__u64		   lo_sizelimit;/* bytes, 0 == max available */
-	__u32		   lo_number;			/* ioctl r/o */
-	__u32		   lo_encrypt_type;
-	__u32		   lo_encrypt_key_size;		/* ioctl w/o */
-	__u32		   lo_flags;			/* ioctl r/o */
-	__u8		   lo_file_name[LO_NAME_SIZE];
-	__u8		   lo_crypt_name[LO_NAME_SIZE];
-	__u8		   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	__u64		   lo_init[2];
-};
-
-/*
- * Loop filter types
- */
-
-#define LO_CRYPT_NONE		0
-#define LO_CRYPT_XOR		1
-#define LO_CRYPT_DES		2
-#define LO_CRYPT_FISH2		3    /* Twofish encryption */
-#define LO_CRYPT_BLOW		4
-#define LO_CRYPT_CAST128	5
-#define LO_CRYPT_IDEA		6
-#define LO_CRYPT_DUMMY		9
-#define LO_CRYPT_SKIPJACK	10
-#define LO_CRYPT_CRYPTOAPI	18
-#define MAX_LO_CRYPT		20
-
-#ifdef __KERNEL__
 /* Support for loadable transfer modules */
 struct loop_func_table {
 	int number;	/* filter type */ 
@@ -147,21 +80,3 @@ int loop_register_transfer(struct loop_func_table *funcs);
 int loop_unregister_transfer(int number); 
 
 #endif
-/*
- * IOCTL commands --- we will commandeer 0x4C ('L')
- */
-
-#define LOOP_SET_FD		0x4C00
-#define LOOP_CLR_FD		0x4C01
-#define LOOP_SET_STATUS		0x4C02
-#define LOOP_GET_STATUS		0x4C03
-#define LOOP_SET_STATUS64	0x4C04
-#define LOOP_GET_STATUS64	0x4C05
-#define LOOP_CHANGE_FD		0x4C06
-#define LOOP_SET_CAPACITY	0x4C07
-
-/* /dev/loop-control interface */
-#define LOOP_CTL_ADD		0x4C80
-#define LOOP_CTL_REMOVE		0x4C81
-#define LOOP_CTL_GET_FREE	0x4C82
-#endif
diff --git a/include/linux/lp.h b/include/linux/lp.h
index 0df024bfd6f0..0dd276af9e4e 100644
--- a/include/linux/lp.h
+++ b/include/linux/lp.h
@@ -1,105 +1,16 @@
-#ifndef _LINUX_LP_H
-#define _LINUX_LP_H
-
 /*
  * usr/include/linux/lp.h c.1991-1992 James Wiegand
  * many modifications copyright (C) 1992 Michael K. Johnson
  * Interrupt support added 1993 Nigel Gamble
  * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti 
  */
+#ifndef _LINUX_LP_H
+#define _LINUX_LP_H
 
-/*
- * Per POSIX guidelines, this module reserves the LP and lp prefixes
- * These are the lp_table[minor].flags flags...
- */
-#define LP_EXIST 0x0001
-#define LP_SELEC 0x0002
-#define LP_BUSY	 0x0004
-#define LP_BUSY_BIT_POS 2
-#define LP_OFFL	 0x0008
-#define LP_NOPA  0x0010
-#define LP_ERR   0x0020
-#define LP_ABORT 0x0040
-#define LP_CAREFUL 0x0080 /* obsoleted -arca */
-#define LP_ABORTOPEN 0x0100
-
-#define LP_TRUST_IRQ_  0x0200 /* obsolete */
-#define LP_NO_REVERSE  0x0400 /* No reverse mode available. */
-#define LP_DATA_AVAIL  0x0800 /* Data is available. */
-
-/* 
- * bit defines for 8255 status port
- * base + 1
- * accessed with LP_S(minor), which gets the byte...
- */
-#define LP_PBUSY	0x80  /* inverted input, active high */
-#define LP_PACK		0x40  /* unchanged input, active low */
-#define LP_POUTPA	0x20  /* unchanged input, active high */
-#define LP_PSELECD	0x10  /* unchanged input, active high */
-#define LP_PERRORP	0x08  /* unchanged input, active low */
-
-/* timeout for each character.  This is relative to bus cycles -- it
- * is the count in a busy loop.  THIS IS THE VALUE TO CHANGE if you
- * have extremely slow printing, or if the machine seems to slow down
- * a lot when you print.  If you have slow printing, increase this
- * number and recompile, and if your system gets bogged down, decrease
- * this number.  This can be changed with the tunelp(8) command as well.
- */
-
-#define LP_INIT_CHAR 1000
-
-/* The parallel port specs apparently say that there needs to be
- * a .5usec wait before and after the strobe.
- */
-
-#define LP_INIT_WAIT 1
-
-/* This is the amount of time that the driver waits for the printer to
- * catch up when the printer's buffer appears to be filled.  If you
- * want to tune this and have a fast printer (i.e. HPIIIP), decrease
- * this number, and if you have a slow printer, increase this number.
- * This is in hundredths of a second, the default 2 being .05 second.
- * Or use the tunelp(8) command, which is especially nice if you want
- * change back and forth between character and graphics printing, which
- * are wildly different...
- */
-
-#define LP_INIT_TIME 2
-
-/* IOCTL numbers */
-#define LPCHAR   0x0601  /* corresponds to LP_INIT_CHAR */
-#define LPTIME   0x0602  /* corresponds to LP_INIT_TIME */
-#define LPABORT  0x0604  /* call with TRUE arg to abort on error,
-			    FALSE to retry.  Default is retry.  */
-#define LPSETIRQ 0x0605  /* call with new IRQ number,
-			    or 0 for polling (no IRQ) */
-#define LPGETIRQ 0x0606  /* get the current IRQ number */
-#define LPWAIT   0x0608  /* corresponds to LP_INIT_WAIT */
-/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
-#define LPCAREFUL   0x0609  /* call with TRUE arg to require out-of-paper, off-
-			    line, and error indicators good on all writes,
-			    FALSE to ignore them.  Default is ignore. */
-#define LPABORTOPEN 0x060a  /* call with TRUE arg to abort open() on error,
-			    FALSE to ignore error.  Default is ignore.  */
-#define LPGETSTATUS 0x060b  /* return LP_S(minor) */
-#define LPRESET     0x060c  /* reset printer */
-#ifdef LP_STATS
-#define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */
-#endif
-#define LPGETFLAGS  0x060e  /* get status flags */
-#define LPSETTIMEOUT 0x060f /* set parport timeout */
-
-/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
-   This is also used for re-checking error conditions if LP_ABORT is
-   not set.  This is the default behavior. */
-
-#define LP_TIMEOUT_INTERRUPT	(60 * HZ)
-#define LP_TIMEOUT_POLLED	(10 * HZ)
-
-#ifdef __KERNEL__
 
 #include <linux/wait.h>
 #include <linux/mutex.h>
+#include <uapi/linux/lp.h>
 
 /* Magic numbers for defining port-device mappings */
 #define LP_PARPORT_UNSPEC -4
@@ -187,5 +98,3 @@ struct lp_struct {
 #define LP_DELAY 	50
 
 #endif
-
-#endif
diff --git a/include/linux/magic.h b/include/linux/magic.h
deleted file mode 100644
index e15192cb9cf4..000000000000
--- a/include/linux/magic.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __LINUX_MAGIC_H__
-#define __LINUX_MAGIC_H__
-
-#define ADFS_SUPER_MAGIC	0xadf5
-#define AFFS_SUPER_MAGIC	0xadff
-#define AFS_SUPER_MAGIC                0x5346414F
-#define AUTOFS_SUPER_MAGIC	0x0187
-#define CODA_SUPER_MAGIC	0x73757245
-#define CRAMFS_MAGIC		0x28cd3d45	/* some random number */
-#define CRAMFS_MAGIC_WEND	0x453dcd28	/* magic number with the wrong endianess */
-#define DEBUGFS_MAGIC          0x64626720
-#define SECURITYFS_MAGIC	0x73636673
-#define SELINUX_MAGIC		0xf97cff8c
-#define RAMFS_MAGIC		0x858458f6	/* some random number */
-#define TMPFS_MAGIC		0x01021994
-#define HUGETLBFS_MAGIC 	0x958458f6	/* some random number */
-#define SQUASHFS_MAGIC		0x73717368
-#define ECRYPTFS_SUPER_MAGIC	0xf15f
-#define EFS_SUPER_MAGIC		0x414A53
-#define EXT2_SUPER_MAGIC	0xEF53
-#define EXT3_SUPER_MAGIC	0xEF53
-#define XENFS_SUPER_MAGIC	0xabba1974
-#define EXT4_SUPER_MAGIC	0xEF53
-#define BTRFS_SUPER_MAGIC	0x9123683E
-#define NILFS_SUPER_MAGIC	0x3434
-#define HPFS_SUPER_MAGIC	0xf995e849
-#define ISOFS_SUPER_MAGIC	0x9660
-#define JFFS2_SUPER_MAGIC	0x72b6
-#define PSTOREFS_MAGIC		0x6165676C
-
-#define MINIX_SUPER_MAGIC	0x137F		/* minix v1 fs, 14 char names */
-#define MINIX_SUPER_MAGIC2	0x138F		/* minix v1 fs, 30 char names */
-#define MINIX2_SUPER_MAGIC	0x2468		/* minix v2 fs, 14 char names */
-#define MINIX2_SUPER_MAGIC2	0x2478		/* minix v2 fs, 30 char names */
-#define MINIX3_SUPER_MAGIC	0x4d5a		/* minix v3 fs, 60 char names */
-
-#define MSDOS_SUPER_MAGIC	0x4d44		/* MD */
-#define NCP_SUPER_MAGIC		0x564c		/* Guess, what 0x564c is :-) */
-#define NFS_SUPER_MAGIC		0x6969
-#define OPENPROM_SUPER_MAGIC	0x9fa1
-#define QNX4_SUPER_MAGIC	0x002f		/* qnx4 fs detection */
-#define QNX6_SUPER_MAGIC	0x68191122	/* qnx6 fs detection */
-
-#define REISERFS_SUPER_MAGIC	0x52654973	/* used by gcc */
-					/* used by file system utilities that
-	                                   look at the superblock, etc.  */
-#define REISERFS_SUPER_MAGIC_STRING	"ReIsErFs"
-#define REISER2FS_SUPER_MAGIC_STRING	"ReIsEr2Fs"
-#define REISER2FS_JR_SUPER_MAGIC_STRING	"ReIsEr3Fs"
-
-#define SMB_SUPER_MAGIC		0x517B
-#define CGROUP_SUPER_MAGIC	0x27e0eb
-
-
-#define STACK_END_MAGIC		0x57AC6E9D
-
-#define V9FS_MAGIC		0x01021997
-
-#define BDEVFS_MAGIC            0x62646576
-#define BINFMTFS_MAGIC          0x42494e4d
-#define DEVPTS_SUPER_MAGIC	0x1cd1
-#define FUTEXFS_SUPER_MAGIC	0xBAD1DEA
-#define PIPEFS_MAGIC            0x50495045
-#define PROC_SUPER_MAGIC	0x9fa0
-#define SOCKFS_MAGIC		0x534F434B
-#define SYSFS_MAGIC		0x62656572
-#define USBDEVICE_SUPER_MAGIC	0x9fa2
-#define MTD_INODE_FS_MAGIC      0x11307854
-#define ANON_INODE_FS_MAGIC	0x09041934
-
-
-#endif /* __LINUX_MAGIC_H__ */
diff --git a/include/linux/major.h b/include/linux/major.h
deleted file mode 100644
index 6a8ca98c9a96..000000000000
--- a/include/linux/major.h
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef _LINUX_MAJOR_H
-#define _LINUX_MAJOR_H
-
-/*
- * This file has definitions for major device numbers.
- * For the device number assignments, see Documentation/devices.txt.
- */
-
-#define UNNAMED_MAJOR		0
-#define MEM_MAJOR		1
-#define RAMDISK_MAJOR		1
-#define FLOPPY_MAJOR		2
-#define PTY_MASTER_MAJOR	2
-#define IDE0_MAJOR		3
-#define HD_MAJOR		IDE0_MAJOR
-#define PTY_SLAVE_MAJOR		3
-#define TTY_MAJOR		4
-#define TTYAUX_MAJOR		5
-#define LP_MAJOR		6
-#define VCS_MAJOR		7
-#define LOOP_MAJOR		7
-#define SCSI_DISK0_MAJOR	8
-#define SCSI_TAPE_MAJOR		9
-#define MD_MAJOR		9
-#define MISC_MAJOR		10
-#define SCSI_CDROM_MAJOR	11
-#define MUX_MAJOR		11	/* PA-RISC only */
-#define XT_DISK_MAJOR		13
-#define INPUT_MAJOR		13
-#define SOUND_MAJOR		14
-#define CDU31A_CDROM_MAJOR	15
-#define JOYSTICK_MAJOR		15
-#define GOLDSTAR_CDROM_MAJOR	16
-#define OPTICS_CDROM_MAJOR	17
-#define SANYO_CDROM_MAJOR	18
-#define CYCLADES_MAJOR		19
-#define CYCLADESAUX_MAJOR	20
-#define MITSUMI_X_CDROM_MAJOR	20
-#define MFM_ACORN_MAJOR		21	/* ARM Linux /dev/mfm */
-#define SCSI_GENERIC_MAJOR	21
-#define IDE1_MAJOR		22
-#define DIGICU_MAJOR		22
-#define DIGI_MAJOR		23
-#define MITSUMI_CDROM_MAJOR	23
-#define CDU535_CDROM_MAJOR	24
-#define STL_SERIALMAJOR		24
-#define MATSUSHITA_CDROM_MAJOR	25
-#define STL_CALLOUTMAJOR	25
-#define MATSUSHITA_CDROM2_MAJOR	26
-#define QIC117_TAPE_MAJOR	27
-#define MATSUSHITA_CDROM3_MAJOR	27
-#define MATSUSHITA_CDROM4_MAJOR	28
-#define STL_SIOMEMMAJOR		28
-#define ACSI_MAJOR		28
-#define AZTECH_CDROM_MAJOR	29
-#define FB_MAJOR		29   /* /dev/fb* framebuffers */
-#define CM206_CDROM_MAJOR	32
-#define IDE2_MAJOR		33
-#define IDE3_MAJOR		34
-#define Z8530_MAJOR		34
-#define XPRAM_MAJOR		35   /* Expanded storage on S/390: "slow ram"*/
-#define NETLINK_MAJOR		36
-#define PS2ESDI_MAJOR		36
-#define IDETAPE_MAJOR		37
-#define Z2RAM_MAJOR		37
-#define APBLOCK_MAJOR		38   /* AP1000 Block device */
-#define DDV_MAJOR		39   /* AP1000 DDV block device */
-#define NBD_MAJOR		43   /* Network block device	*/
-#define RISCOM8_NORMAL_MAJOR	48
-#define DAC960_MAJOR		48   /* 48..55 */
-#define RISCOM8_CALLOUT_MAJOR	49
-#define MKISS_MAJOR		55
-#define DSP56K_MAJOR		55   /* DSP56001 processor device */
-
-#define IDE4_MAJOR		56
-#define IDE5_MAJOR		57
-
-#define SCSI_DISK1_MAJOR	65
-#define SCSI_DISK2_MAJOR	66
-#define SCSI_DISK3_MAJOR	67
-#define SCSI_DISK4_MAJOR	68
-#define SCSI_DISK5_MAJOR	69
-#define SCSI_DISK6_MAJOR	70
-#define SCSI_DISK7_MAJOR	71
-
-#define COMPAQ_SMART2_MAJOR	72
-#define COMPAQ_SMART2_MAJOR1	73
-#define COMPAQ_SMART2_MAJOR2	74
-#define COMPAQ_SMART2_MAJOR3	75
-#define COMPAQ_SMART2_MAJOR4	76
-#define COMPAQ_SMART2_MAJOR5	77
-#define COMPAQ_SMART2_MAJOR6	78
-#define COMPAQ_SMART2_MAJOR7	79
-
-#define SPECIALIX_NORMAL_MAJOR	75
-#define SPECIALIX_CALLOUT_MAJOR	76
-
-#define AURORA_MAJOR		79
-
-#define I2O_MAJOR		80	/* 80->87 */
-
-#define SHMIQ_MAJOR		85   /* Linux/mips, SGI /dev/shmiq */
-#define SCSI_CHANGER_MAJOR      86
-
-#define IDE6_MAJOR		88
-#define IDE7_MAJOR		89
-#define IDE8_MAJOR		90
-#define IDE9_MAJOR		91
-
-#define DASD_MAJOR		94
-
-#define MDISK_MAJOR		95
-
-#define UBD_MAJOR		98
-
-#define PP_MAJOR		99
-#define JSFD_MAJOR		99
-
-#define PHONE_MAJOR		100
-
-#define COMPAQ_CISS_MAJOR	104
-#define COMPAQ_CISS_MAJOR1	105
-#define COMPAQ_CISS_MAJOR2      106
-#define COMPAQ_CISS_MAJOR3      107
-#define COMPAQ_CISS_MAJOR4      108
-#define COMPAQ_CISS_MAJOR5      109
-#define COMPAQ_CISS_MAJOR6      110
-#define COMPAQ_CISS_MAJOR7      111
-
-#define VIODASD_MAJOR		112
-#define VIOCD_MAJOR		113
-
-#define ATARAID_MAJOR		114
-
-#define SCSI_DISK8_MAJOR	128
-#define SCSI_DISK9_MAJOR	129
-#define SCSI_DISK10_MAJOR	130
-#define SCSI_DISK11_MAJOR	131
-#define SCSI_DISK12_MAJOR	132
-#define SCSI_DISK13_MAJOR	133
-#define SCSI_DISK14_MAJOR	134
-#define SCSI_DISK15_MAJOR	135
-
-#define UNIX98_PTY_MASTER_MAJOR	128
-#define UNIX98_PTY_MAJOR_COUNT	8
-#define UNIX98_PTY_SLAVE_MAJOR	(UNIX98_PTY_MASTER_MAJOR+UNIX98_PTY_MAJOR_COUNT)
-
-#define DRBD_MAJOR		147
-#define RTF_MAJOR		150
-#define RAW_MAJOR		162
-
-#define USB_ACM_MAJOR		166
-#define USB_ACM_AUX_MAJOR	167
-#define USB_CHAR_MAJOR		180
-
-#define MMC_BLOCK_MAJOR		179
-
-#define VXVM_MAJOR		199	/* VERITAS volume i/o driver    */
-#define VXSPEC_MAJOR		200	/* VERITAS volume config driver */
-#define VXDMP_MAJOR		201	/* VERITAS volume multipath driver */
-
-#define XENVBD_MAJOR		202	/* Xen virtual block device */
-
-#define MSR_MAJOR		202
-#define CPUID_MAJOR		203
-
-#define OSST_MAJOR		206	/* OnStream-SCx0 SCSI tape */
-
-#define IBM_TTY3270_MAJOR	227
-#define IBM_FS3270_MAJOR	228
-
-#define VIOTAPE_MAJOR		230
-
-#define BLOCK_EXT_MAJOR		259
-#define SCSI_OSD_MAJOR		260	/* open-osd's OSD scsi device */
-
-#endif
diff --git a/include/linux/map_to_7segment.h b/include/linux/map_to_7segment.h
deleted file mode 100644
index 12d62a54d470..000000000000
--- a/include/linux/map_to_7segment.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef MAP_TO_7SEGMENT_H
-#define MAP_TO_7SEGMENT_H
-
-/* This file provides translation primitives and tables for the conversion
- * of (ASCII) characters to a 7-segments notation.
- *
- * The 7 segment's wikipedia notation below is used as standard.
- * See: http://en.wikipedia.org/wiki/Seven_segment_display
- *
- * Notation:	+-a-+
- *		f   b
- *		+-g-+
- *		e   c
- *		+-d-+
- *
- * Usage:
- *
- *   Register a map variable, and fill it with a character set:
- *	static SEG7_DEFAULT_MAP(map_seg7);
- *
- *
- *   Then use for conversion:
- *	seg7 = map_to_seg7(&map_seg7, some_char);
- *	...
- *
- * In device drivers it is recommended, if required, to make the char map
- * accessible via the sysfs interface using the following scheme:
- *
- * static ssize_t show_map(struct device *dev, char *buf) {
- *	memcpy(buf, &map_seg7, sizeof(map_seg7));
- *	return sizeof(map_seg7);
- * }
- * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
- *	if(cnt != sizeof(map_seg7))
- *		return -EINVAL;
- *	memcpy(&map_seg7, buf, cnt);
- *	return cnt;
- * }
- * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
- *
- * History:
- * 2005-05-31	RFC linux-kernel@vger.kernel.org
- */
-#include <linux/errno.h>
-
-
-#define BIT_SEG7_A		0
-#define BIT_SEG7_B		1
-#define BIT_SEG7_C		2
-#define BIT_SEG7_D		3
-#define BIT_SEG7_E		4
-#define BIT_SEG7_F		5
-#define BIT_SEG7_G		6
-#define BIT_SEG7_RESERVED	7
-
-struct seg7_conversion_map {
-	unsigned char	table[128];
-};
-
-static __inline__ int map_to_seg7(struct seg7_conversion_map *map, int c)
-{
-	return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
-}
-
-#define SEG7_CONVERSION_MAP(_name, _map)	\
-	struct seg7_conversion_map _name = { .table = { _map } }
-
-/*
- * It is recommended to use a facility that allows user space to redefine
- * custom character sets for LCD devices. Please use a sysfs interface
- * as described above.
- */
-#define MAP_TO_SEG7_SYSFS_FILE	"map_seg7"
-
-/*******************************************************************************
- * ASCII conversion table
- ******************************************************************************/
-
-#define _SEG7(l,a,b,c,d,e,f,g)	\
-      (	a<<BIT_SEG7_A |	b<<BIT_SEG7_B |	c<<BIT_SEG7_C |	d<<BIT_SEG7_D |	\
-	e<<BIT_SEG7_E |	f<<BIT_SEG7_F |	g<<BIT_SEG7_G )
-
-#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
-	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-
-#define _MAP_33_47_ASCII_SEG7_SYMBOL		\
- _SEG7('!',0,0,0,0,1,1,0), _SEG7('"',0,1,0,0,0,1,0), _SEG7('#',0,1,1,0,1,1,0),\
- _SEG7('$',1,0,1,1,0,1,1), _SEG7('%',0,0,1,0,0,1,0), _SEG7('&',1,0,1,1,1,1,1),\
- _SEG7('\'',0,0,0,0,0,1,0),_SEG7('(',1,0,0,1,1,1,0), _SEG7(')',1,1,1,1,0,0,0),\
- _SEG7('*',0,1,1,0,1,1,1), _SEG7('+',0,1,1,0,0,0,1), _SEG7(',',0,0,0,0,1,0,0),\
- _SEG7('-',0,0,0,0,0,0,1), _SEG7('.',0,0,0,0,1,0,0), _SEG7('/',0,1,0,0,1,0,1),
-
-#define _MAP_48_57_ASCII_SEG7_NUMERIC		\
- _SEG7('0',1,1,1,1,1,1,0), _SEG7('1',0,1,1,0,0,0,0), _SEG7('2',1,1,0,1,1,0,1),\
- _SEG7('3',1,1,1,1,0,0,1), _SEG7('4',0,1,1,0,0,1,1), _SEG7('5',1,0,1,1,0,1,1),\
- _SEG7('6',1,0,1,1,1,1,1), _SEG7('7',1,1,1,0,0,0,0), _SEG7('8',1,1,1,1,1,1,1),\
- _SEG7('9',1,1,1,1,0,1,1),
-
-#define _MAP_58_64_ASCII_SEG7_SYMBOL		\
- _SEG7(':',0,0,0,1,0,0,1), _SEG7(';',0,0,0,1,0,0,1), _SEG7('<',1,0,0,0,0,1,1),\
- _SEG7('=',0,0,0,1,0,0,1), _SEG7('>',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\
- _SEG7('@',1,1,0,1,1,1,1),
-
-#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
- _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\
- _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
- _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\
- _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
- _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\
- _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\
- _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\
- _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
- _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
-
-#define _MAP_91_96_ASCII_SEG7_SYMBOL		\
- _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\
- _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0),
-
-#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
- _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\
- _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
- _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\
- _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
- _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\
- _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\
- _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\
- _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
- _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
-
-#define _MAP_123_126_ASCII_SEG7_SYMBOL		\
- _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\
- _SEG7('~',1,0,0,0,0,0,0),
-
-/* Maps */
-
-/* This set tries to map as close as possible to the visible characteristics
- * of the ASCII symbol, lowercase and uppercase letters may differ in
- * presentation on the display.
- */
-#define MAP_ASCII7SEG_ALPHANUM			\
-	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
-	_MAP_33_47_ASCII_SEG7_SYMBOL		\
-	_MAP_48_57_ASCII_SEG7_NUMERIC		\
-	_MAP_58_64_ASCII_SEG7_SYMBOL		\
-	_MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
-	_MAP_91_96_ASCII_SEG7_SYMBOL		\
-	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
-	_MAP_123_126_ASCII_SEG7_SYMBOL
-
-/* This set tries to map as close as possible to the symbolic characteristics
- * of the ASCII character for maximum discrimination.
- * For now this means all alpha chars are in lower case representations.
- * (This for example facilitates the use of hex numbers with uppercase input.)
- */
-#define MAP_ASCII7SEG_ALPHANUM_LC			\
-	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
-	_MAP_33_47_ASCII_SEG7_SYMBOL		\
-	_MAP_48_57_ASCII_SEG7_NUMERIC		\
-	_MAP_58_64_ASCII_SEG7_SYMBOL		\
-	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
-	_MAP_91_96_ASCII_SEG7_SYMBOL		\
-	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
-	_MAP_123_126_ASCII_SEG7_SYMBOL
-
-#define SEG7_DEFAULT_MAP(_name)		\
-	SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM)
-
-#endif	/* MAP_TO_7SEGMENT_H */
-
diff --git a/include/linux/matroxfb.h b/include/linux/matroxfb.h
deleted file mode 100644
index 8c22a8938642..000000000000
--- a/include/linux/matroxfb.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __LINUX_MATROXFB_H__
-#define __LINUX_MATROXFB_H__
-
-#include <asm/ioctl.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-#include <linux/fb.h>
-
-struct matroxioc_output_mode {
-	__u32	output;		/* which output */
-#define MATROXFB_OUTPUT_PRIMARY		0x0000
-#define MATROXFB_OUTPUT_SECONDARY	0x0001
-#define MATROXFB_OUTPUT_DFP		0x0002
-	__u32	mode;		/* which mode */
-#define MATROXFB_OUTPUT_MODE_PAL	0x0001
-#define MATROXFB_OUTPUT_MODE_NTSC	0x0002
-#define MATROXFB_OUTPUT_MODE_MONITOR	0x0080
-};
-#define MATROXFB_SET_OUTPUT_MODE	_IOW('n',0xFA,size_t)
-#define MATROXFB_GET_OUTPUT_MODE	_IOWR('n',0xFA,size_t)
-
-/* bitfield */
-#define MATROXFB_OUTPUT_CONN_PRIMARY	(1 << MATROXFB_OUTPUT_PRIMARY)
-#define MATROXFB_OUTPUT_CONN_SECONDARY	(1 << MATROXFB_OUTPUT_SECONDARY)
-#define MATROXFB_OUTPUT_CONN_DFP	(1 << MATROXFB_OUTPUT_DFP)
-/* connect these outputs to this framebuffer */
-#define MATROXFB_SET_OUTPUT_CONNECTION	_IOW('n',0xF8,size_t)
-/* which outputs are connected to this framebuffer */
-#define MATROXFB_GET_OUTPUT_CONNECTION	_IOR('n',0xF8,size_t)
-/* which outputs are available for this framebuffer */
-#define MATROXFB_GET_AVAILABLE_OUTPUTS	_IOR('n',0xF9,size_t)
-/* which outputs exist on this framebuffer */
-#define MATROXFB_GET_ALL_OUTPUTS	_IOR('n',0xFB,size_t)
-
-enum matroxfb_ctrl_id {
-  MATROXFB_CID_TESTOUT	 = V4L2_CID_PRIVATE_BASE,
-  MATROXFB_CID_DEFLICKER,
-  MATROXFB_CID_LAST
-};
-
-#endif
-
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 6c406845f7e2..3d15c838116c 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -6,295 +6,11 @@
  * under the terms of the GNU General Public License version 2 as published
  * by the Free Software Foundation, incorporated herein by reference.
  */
-
 #ifndef __LINUX_MDIO_H__
 #define __LINUX_MDIO_H__
 
-#include <linux/types.h>
-#include <linux/mii.h>
-
-/* MDIO Manageable Devices (MMDs). */
-#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
-					 * Physical Medium Dependent */
-#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
-#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
-#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
-#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
-#define MDIO_MMD_TC		6	/* Transmission Convergence */
-#define MDIO_MMD_AN		7	/* Auto-Negotiation */
-#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
-#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
-#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
-
-/* Generic MDIO registers. */
-#define MDIO_CTRL1		MII_BMCR
-#define MDIO_STAT1		MII_BMSR
-#define MDIO_DEVID1		MII_PHYSID1
-#define MDIO_DEVID2		MII_PHYSID2
-#define MDIO_SPEED		4	/* Speed ability */
-#define MDIO_DEVS1		5	/* Devices in package */
-#define MDIO_DEVS2		6
-#define MDIO_CTRL2		7	/* 10G control 2 */
-#define MDIO_STAT2		8	/* 10G status 2 */
-#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
-#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
-#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
-#define MDIO_PKGID1		14	/* Package identifier */
-#define MDIO_PKGID2		15
-#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
-#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
-#define MDIO_PCS_EEE_ABLE	20	/* EEE Capability register */
-#define MDIO_PCS_EEE_WK_ERR	22	/* EEE wake error counter */
-#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
-#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
-#define MDIO_AN_EEE_LPABLE	61	/* EEE link partner ability */
-
-/* Media-dependent registers. */
-#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
-#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
-					 * Lanes B-D are numbered 134-136. */
-#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
-#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
-#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
-#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
-
-/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
-#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
-#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
-#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
-#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
-#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
-#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
-
-/* Control register 1. */
-/* Enable extended speed selection */
-#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
-/* All speed selection bits */
-#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
-#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
-#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
-#define MDIO_CTRL1_RESET		BMCR_RESET
-#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
-#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
-#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
-#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
-#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
-#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
-#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
-#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
-#define MDIO_PCS_CTRL1_CLKSTOP_EN	0x400	/* Stop the clock during LPI */
-
-/* 10 Gb/s */
-#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
-/* 10PASS-TS/2BASE-TL */
-#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
-
-/* Status register 1. */
-#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
-#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
-#define MDIO_STAT1_FAULT		0x0080	/* Fault */
-#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
-#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
-#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
-#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
-#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
-#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
-
-/* Speed register. */
-#define MDIO_SPEED_10G			0x0001	/* 10G capable */
-#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
-#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
-#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
-#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
-#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
-#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
-
-/* Device present registers. */
-#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
-#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
-#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
-#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
-#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
-#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
-#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
-#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
-#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
-
-/* Control register 2. */
-#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
-#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
-#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
-#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
-#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
-#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
-#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
-#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
-#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
-#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
-#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
-#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
-#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
-#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
-#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
-#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
-#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
-#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
-#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
-#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
-#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
-#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
-
-/* Status register 2. */
-#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
-#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
-#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
-#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
-#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
-#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
-#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
-#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
-#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
-#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
-#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
-#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
-#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
-#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
-#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
-#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
-#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
-#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
-#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
-#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
-#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
-
-/* Transmit disable register. */
-#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
-#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
-#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
-#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
-#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
-
-/* Receive signal detect register. */
-#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
-#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
-#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
-#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
-#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
-
-/* Extended abilities register. */
-#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
-#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
-#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
-#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
-#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
-#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
-#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
-#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
-#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
-
-/* PHY XGXS lane state register. */
-#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
-#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
-#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
-#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
-#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
-
-/* PMA 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
-
-/* PMA 10GBASE-T TX power register. */
-#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
-
-/* PMA 10GBASE-T SNR registers. */
-/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
-#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
-#define MDIO_PMA_10GBT_SNR_MAX		127
-
-/* PMA 10GBASE-R FEC ability register. */
-#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
-#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
-
-/* PCS 10GBASE-R/-T status register 1. */
-#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
-
-/* PCS 10GBASE-R/-T status register 2. */
-#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
-#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
-
-/* AN 10GBASE-T control register. */
-#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
-
-/* AN 10GBASE-T status register. */
-#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
-#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
-#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
-#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
-#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
-#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
-#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
-
-/* EEE Supported/Advertisement/LP Advertisement registers.
- *
- * EEE capability Register (3.20), Advertisement (7.60) and
- * Link partner ability (7.61) registers have and can use the same identical
- * bit masks.
- */
-#define MDIO_AN_EEE_ADV_100TX	0x0002	/* Advertise 100TX EEE cap */
-#define MDIO_AN_EEE_ADV_1000T	0x0004	/* Advertise 1000T EEE cap */
-/* Note: the two defines above can be potentially used by the user-land
- * and cannot remove them now.
- * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
- * using the previous ones (that can be considered obsolete).
- */
-#define MDIO_EEE_100TX		MDIO_AN_EEE_ADV_100TX	/* 100TX EEE cap */
-#define MDIO_EEE_1000T		MDIO_AN_EEE_ADV_1000T	/* 1000T EEE cap */
-#define MDIO_EEE_10GT		0x0008	/* 10GT EEE cap */
-#define MDIO_EEE_1000KX		0x0010	/* 1000KX EEE cap */
-#define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
-#define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
-
-/* LASI RX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
-#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
-#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
-#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
-#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
-
-/* LASI TX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
-#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
-#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
-#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
-#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
-#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
-
-/* LASI control/status registers. */
-#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
-#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
-#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
-
-/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
-
-#define MDIO_PHY_ID_C45			0x8000
-#define MDIO_PHY_ID_PRTAD		0x03e0
-#define MDIO_PHY_ID_DEVAD		0x001f
-#define MDIO_PHY_ID_C45_MASK						\
-	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
-
-static inline __u16 mdio_phy_id_c45(int prtad, int devad)
-{
-	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
-}
+#include <uapi/linux/mdio.h>
 
-#ifdef __KERNEL__
 
 static inline bool mdio_phy_id_is_c45(int phy_id)
 {
@@ -460,5 +176,4 @@ static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv)
 	return reg;
 }
 
-#endif /* __KERNEL__ */
 #endif /* __LINUX_MDIO_H__ */
diff --git a/include/linux/media.h b/include/linux/media.h
deleted file mode 100644
index 0ef883327de2..000000000000
--- a/include/linux/media.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Multimedia device API
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *	     Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_MEDIA_H
-#define __LINUX_MEDIA_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/version.h>
-
-#define MEDIA_API_VERSION	KERNEL_VERSION(0, 1, 0)
-
-struct media_device_info {
-	char driver[16];
-	char model[32];
-	char serial[40];
-	char bus_info[32];
-	__u32 media_version;
-	__u32 hw_revision;
-	__u32 driver_version;
-	__u32 reserved[31];
-};
-
-#define MEDIA_ENT_ID_FLAG_NEXT		(1 << 31)
-
-#define MEDIA_ENT_TYPE_SHIFT		16
-#define MEDIA_ENT_TYPE_MASK		0x00ff0000
-#define MEDIA_ENT_SUBTYPE_MASK		0x0000ffff
-
-#define MEDIA_ENT_T_DEVNODE		(1 << MEDIA_ENT_TYPE_SHIFT)
-#define MEDIA_ENT_T_DEVNODE_V4L		(MEDIA_ENT_T_DEVNODE + 1)
-#define MEDIA_ENT_T_DEVNODE_FB		(MEDIA_ENT_T_DEVNODE + 2)
-#define MEDIA_ENT_T_DEVNODE_ALSA	(MEDIA_ENT_T_DEVNODE + 3)
-#define MEDIA_ENT_T_DEVNODE_DVB		(MEDIA_ENT_T_DEVNODE + 4)
-
-#define MEDIA_ENT_T_V4L2_SUBDEV		(2 << MEDIA_ENT_TYPE_SHIFT)
-#define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR	(MEDIA_ENT_T_V4L2_SUBDEV + 1)
-#define MEDIA_ENT_T_V4L2_SUBDEV_FLASH	(MEDIA_ENT_T_V4L2_SUBDEV + 2)
-#define MEDIA_ENT_T_V4L2_SUBDEV_LENS	(MEDIA_ENT_T_V4L2_SUBDEV + 3)
-
-#define MEDIA_ENT_FL_DEFAULT		(1 << 0)
-
-struct media_entity_desc {
-	__u32 id;
-	char name[32];
-	__u32 type;
-	__u32 revision;
-	__u32 flags;
-	__u32 group_id;
-	__u16 pads;
-	__u16 links;
-
-	__u32 reserved[4];
-
-	union {
-		/* Node specifications */
-		struct {
-			__u32 major;
-			__u32 minor;
-		} v4l;
-		struct {
-			__u32 major;
-			__u32 minor;
-		} fb;
-		struct {
-			__u32 card;
-			__u32 device;
-			__u32 subdevice;
-		} alsa;
-		int dvb;
-
-		/* Sub-device specifications */
-		/* Nothing needed yet */
-		__u8 raw[184];
-	};
-};
-
-#define MEDIA_PAD_FL_SINK		(1 << 0)
-#define MEDIA_PAD_FL_SOURCE		(1 << 1)
-
-struct media_pad_desc {
-	__u32 entity;		/* entity ID */
-	__u16 index;		/* pad index */
-	__u32 flags;		/* pad flags */
-	__u32 reserved[2];
-};
-
-#define MEDIA_LNK_FL_ENABLED		(1 << 0)
-#define MEDIA_LNK_FL_IMMUTABLE		(1 << 1)
-#define MEDIA_LNK_FL_DYNAMIC		(1 << 2)
-
-struct media_link_desc {
-	struct media_pad_desc source;
-	struct media_pad_desc sink;
-	__u32 flags;
-	__u32 reserved[2];
-};
-
-struct media_links_enum {
-	__u32 entity;
-	/* Should have enough room for pads elements */
-	struct media_pad_desc __user *pads;
-	/* Should have enough room for links elements */
-	struct media_link_desc __user *links;
-	__u32 reserved[4];
-};
-
-#define MEDIA_IOC_DEVICE_INFO		_IOWR('|', 0x00, struct media_device_info)
-#define MEDIA_IOC_ENUM_ENTITIES		_IOWR('|', 0x01, struct media_entity_desc)
-#define MEDIA_IOC_ENUM_LINKS		_IOWR('|', 0x02, struct media_links_enum)
-#define MEDIA_IOC_SETUP_LINK		_IOWR('|', 0x03, struct media_link_desc)
-
-#endif /* __LINUX_MEDIA_H */
diff --git a/include/linux/mei.h b/include/linux/mei.h
deleted file mode 100644
index bc0d8b69c49e..000000000000
--- a/include/linux/mei.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/******************************************************************************
- * Intel Management Engine Interface (Intel MEI) Linux driver
- * Intel MEI Interface Header
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *	Intel Corporation.
- *	linux-mei@linux.intel.com
- *	http://www.intel.com
- *
- * BSD LICENSE
- *
- * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-
-#ifndef _LINUX_MEI_H
-#define _LINUX_MEI_H
-
-#include <linux/uuid.h>
-
-/*
- * This IOCTL is used to associate the current file descriptor with a
- * FW Client (given by UUID). This opens a communication channel
- * between a host client and a FW client. From this point every read and write
- * will communicate with the associated FW client.
- * Only in close() (file_operation release()) the communication between
- * the clients is disconnected
- *
- * The IOCTL argument is a struct with a union that contains
- * the input parameter and the output parameter for this IOCTL.
- *
- * The input parameter is UUID of the FW Client.
- * The output parameter is the properties of the FW client
- * (FW protocol version and max message size).
- *
- */
-#define IOCTL_MEI_CONNECT_CLIENT \
-	_IOWR('H' , 0x01, struct mei_connect_client_data)
-
-/*
- * Intel MEI client information struct
- */
-struct mei_client {
-	__u32 max_msg_length;
-	__u8 protocol_version;
-	__u8 reserved[3];
-};
-
-/*
- * IOCTL Connect Client Data structure
- */
-struct mei_connect_client_data {
-	union {
-		uuid_le in_client_uuid;
-		struct mei_client out_client_properties;
-	};
-};
-
-#endif /* _LINUX_MEI_H  */
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index cec569325608..e5ccb9ddd90e 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -1,66 +1,10 @@
-#ifndef _LINUX_MEMPOLICY_H
-#define _LINUX_MEMPOLICY_H 1
-
-#include <linux/errno.h>
-
 /*
  * NUMA memory policies for Linux.
  * Copyright 2003,2004 Andi Kleen SuSE Labs
  */
+#ifndef _LINUX_MEMPOLICY_H
+#define _LINUX_MEMPOLICY_H 1
 
-/*
- * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are
- * passed by the user to either set_mempolicy() or mbind() in an 'int' actual.
- * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags.
- */
-
-/* Policies */
-enum {
-	MPOL_DEFAULT,
-	MPOL_PREFERRED,
-	MPOL_BIND,
-	MPOL_INTERLEAVE,
-	MPOL_MAX,	/* always last member of enum */
-};
-
-enum mpol_rebind_step {
-	MPOL_REBIND_ONCE,	/* do rebind work at once(not by two step) */
-	MPOL_REBIND_STEP1,	/* first step(set all the newly nodes) */
-	MPOL_REBIND_STEP2,	/* second step(clean all the disallowed nodes)*/
-	MPOL_REBIND_NSTEP,
-};
-
-/* Flags for set_mempolicy */
-#define MPOL_F_STATIC_NODES	(1 << 15)
-#define MPOL_F_RELATIVE_NODES	(1 << 14)
-
-/*
- * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
- * either set_mempolicy() or mbind().
- */
-#define MPOL_MODE_FLAGS	(MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
-
-/* Flags for get_mempolicy */
-#define MPOL_F_NODE	(1<<0)	/* return next IL mode instead of node mask */
-#define MPOL_F_ADDR	(1<<1)	/* look up vma using address */
-#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */
-
-/* Flags for mbind */
-#define MPOL_MF_STRICT	(1<<0)	/* Verify existing pages in the mapping */
-#define MPOL_MF_MOVE	(1<<1)	/* Move pages owned by this process to conform to mapping */
-#define MPOL_MF_MOVE_ALL (1<<2)	/* Move every page to conform to mapping */
-#define MPOL_MF_INTERNAL (1<<3)	/* Internal flags start here */
-
-/*
- * Internal flags that share the struct mempolicy flags word with
- * "mode flags".  These flags are allocated from bit 0 up, as they
- * are never OR'ed into the mode in mempolicy API arguments.
- */
-#define MPOL_F_SHARED  (1 << 0)	/* identify shared policies */
-#define MPOL_F_LOCAL   (1 << 1)	/* preferred local allocation */
-#define MPOL_F_REBINDING (1 << 2)	/* identify policies in rebinding */
-
-#ifdef __KERNEL__
 
 #include <linux/mmzone.h>
 #include <linux/slab.h>
@@ -68,6 +12,7 @@ enum mpol_rebind_step {
 #include <linux/spinlock.h>
 #include <linux/nodemask.h>
 #include <linux/pagemap.h>
+#include <uapi/linux/mempolicy.h>
 
 struct mm_struct;
 
@@ -379,6 +324,4 @@ static inline int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol,
 }
 
 #endif /* CONFIG_NUMA */
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/meye.h b/include/linux/meye.h
deleted file mode 100644
index 0dd49954f746..000000000000
--- a/include/linux/meye.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Motion Eye video4linux driver for Sony Vaio PictureBook
- *
- * Copyright (C) 2001-2003 Stelian Pop <stelian@popies.net>
- *
- * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
- *
- * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
- *
- * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
- *
- * Some parts borrowed from various video4linux drivers, especially
- * bttv-driver.c and zoran.c, see original files for credits.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _MEYE_H_
-#define _MEYE_H_
-
-/****************************************************************************/
-/* Private API for handling mjpeg capture / playback.                       */
-/****************************************************************************/
-
-struct meye_params {
-	unsigned char subsample;
-	unsigned char quality;
-	unsigned char sharpness;
-	unsigned char agc;
-	unsigned char picture;
-	unsigned char framerate;
-};
-
-/* query the extended parameters */
-#define MEYEIOC_G_PARAMS	_IOR ('v', BASE_VIDIOC_PRIVATE+0, struct meye_params)
-/* set the extended parameters */
-#define MEYEIOC_S_PARAMS	_IOW ('v', BASE_VIDIOC_PRIVATE+1, struct meye_params)
-/* queue a buffer for mjpeg capture */
-#define MEYEIOC_QBUF_CAPT	_IOW ('v', BASE_VIDIOC_PRIVATE+2, int)
-/* sync a previously queued mjpeg buffer */
-#define MEYEIOC_SYNC		_IOWR('v', BASE_VIDIOC_PRIVATE+3, int)
-/* get a still uncompressed snapshot */
-#define MEYEIOC_STILLCAPT	_IO  ('v', BASE_VIDIOC_PRIVATE+4)
-/* get a jpeg compressed snapshot */
-#define MEYEIOC_STILLJCAPT	_IOR ('v', BASE_VIDIOC_PRIVATE+5, int)
-
-/* V4L2 private controls */
-#define V4L2_CID_AGC		V4L2_CID_PRIVATE_BASE
-#define V4L2_CID_MEYE_SHARPNESS	(V4L2_CID_PRIVATE_BASE + 1)
-#define V4L2_CID_PICTURE	(V4L2_CID_PRIVATE_BASE + 2)
-#define V4L2_CID_JPEGQUAL	(V4L2_CID_PRIVATE_BASE + 3)
-#define V4L2_CID_FRAMERATE	(V4L2_CID_PRIVATE_BASE + 4)
-
-#endif
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 8ef3a7a11592..47492c9631b3 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -4,163 +4,12 @@
  *
  * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
  */
-
 #ifndef __LINUX_MII_H__
 #define __LINUX_MII_H__
 
-#include <linux/types.h>
-#include <linux/ethtool.h>
-
-/* Generic MII registers. */
-#define MII_BMCR		0x00	/* Basic mode control register */
-#define MII_BMSR		0x01	/* Basic mode status register  */
-#define MII_PHYSID1		0x02	/* PHYS ID 1                   */
-#define MII_PHYSID2		0x03	/* PHYS ID 2                   */
-#define MII_ADVERTISE		0x04	/* Advertisement control reg   */
-#define MII_LPA			0x05	/* Link partner ability reg    */
-#define MII_EXPANSION		0x06	/* Expansion register          */
-#define MII_CTRL1000		0x09	/* 1000BASE-T control          */
-#define MII_STAT1000		0x0a	/* 1000BASE-T status           */
-#define	MII_MMD_CTRL		0x0d	/* MMD Access Control Register */
-#define	MII_MMD_DATA		0x0e	/* MMD Access Data Register */
-#define MII_ESTATUS		0x0f	/* Extended Status             */
-#define MII_DCOUNTER		0x12	/* Disconnect counter          */
-#define MII_FCSCOUNTER		0x13	/* False carrier counter       */
-#define MII_NWAYTEST		0x14	/* N-way auto-neg test reg     */
-#define MII_RERRCOUNTER		0x15	/* Receive error counter       */
-#define MII_SREVISION		0x16	/* Silicon revision            */
-#define MII_RESV1		0x17	/* Reserved...                 */
-#define MII_LBRERROR		0x18	/* Lpback, rx, bypass error    */
-#define MII_PHYADDR		0x19	/* PHY address                 */
-#define MII_RESV2		0x1a	/* Reserved...                 */
-#define MII_TPISTATUS		0x1b	/* TPI status for 10mbps       */
-#define MII_NCONFIG		0x1c	/* Network interface config    */
-
-/* Basic mode control register. */
-#define BMCR_RESV		0x003f	/* Unused...                   */
-#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)         */
-#define BMCR_CTST		0x0080	/* Collision test              */
-#define BMCR_FULLDPLX		0x0100	/* Full duplex                 */
-#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
-#define BMCR_ISOLATE		0x0400	/* Isolate data paths from MII */
-#define BMCR_PDOWN		0x0800	/* Enable low power state      */
-#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
-#define BMCR_SPEED100		0x2000	/* Select 100Mbps              */
-#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits           */
-#define BMCR_RESET		0x8000	/* Reset to default state      */
-
-/* Basic mode status register. */
-#define BMSR_ERCAP		0x0001	/* Ext-reg capability          */
-#define BMSR_JCD		0x0002	/* Jabber detected             */
-#define BMSR_LSTATUS		0x0004	/* Link status                 */
-#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
-#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
-#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
-#define BMSR_RESV		0x00c0	/* Unused...                   */
-#define BMSR_ESTATEN		0x0100	/* Extended Status in R15      */
-#define BMSR_100HALF2		0x0200	/* Can do 100BASE-T2 HDX       */
-#define BMSR_100FULL2		0x0400	/* Can do 100BASE-T2 FDX       */
-#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
-#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
-#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
-#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
-
-/* Advertisement control register. */
-#define ADVERTISE_SLCT		0x001f	/* Selector bits               */
-#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
-#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
-#define ADVERTISE_1000XFULL	0x0020	/* Try for 1000BASE-X full-duplex */
-#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
-#define ADVERTISE_1000XHALF	0x0040	/* Try for 1000BASE-X half-duplex */
-#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
-#define ADVERTISE_1000XPAUSE	0x0080	/* Try for 1000BASE-X pause    */
-#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
-#define ADVERTISE_1000XPSE_ASYM	0x0100	/* Try for 1000BASE-X asym pause */
-#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
-#define ADVERTISE_PAUSE_CAP	0x0400	/* Try for pause               */
-#define ADVERTISE_PAUSE_ASYM	0x0800	/* Try for asymetric pause     */
-#define ADVERTISE_RESV		0x1000	/* Unused...                   */
-#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
-#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
-#define ADVERTISE_NPAGE		0x8000	/* Next page bit               */
-
-#define ADVERTISE_FULL		(ADVERTISE_100FULL | ADVERTISE_10FULL | \
-				  ADVERTISE_CSMA)
-#define ADVERTISE_ALL		(ADVERTISE_10HALF | ADVERTISE_10FULL | \
-				  ADVERTISE_100HALF | ADVERTISE_100FULL)
-
-/* Link partner ability register. */
-#define LPA_SLCT		0x001f	/* Same as advertise selector  */
-#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
-#define LPA_1000XFULL		0x0020	/* Can do 1000BASE-X full-duplex */
-#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
-#define LPA_1000XHALF		0x0040	/* Can do 1000BASE-X half-duplex */
-#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
-#define LPA_1000XPAUSE		0x0080	/* Can do 1000BASE-X pause     */
-#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
-#define LPA_1000XPAUSE_ASYM	0x0100	/* Can do 1000BASE-X pause asym*/
-#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
-#define LPA_PAUSE_CAP		0x0400	/* Can pause                   */
-#define LPA_PAUSE_ASYM		0x0800	/* Can pause asymetrically     */
-#define LPA_RESV		0x1000	/* Unused...                   */
-#define LPA_RFAULT		0x2000	/* Link partner faulted        */
-#define LPA_LPACK		0x4000	/* Link partner acked us       */
-#define LPA_NPAGE		0x8000	/* Next page bit               */
-
-#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
-#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
-
-/* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
-#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
-#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
-#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
-#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
-#define EXPANSION_RESV		0xffe0	/* Unused...                   */
-
-#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full          */
-#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half          */
-
-/* N-way test register. */
-#define NWAYTEST_RESV1		0x00ff	/* Unused...                   */
-#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
-#define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
-
-/* 1000BASE-T Control register */
-#define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
-#define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
-#define CTL1000_AS_MASTER	0x0800
-#define CTL1000_ENABLE_MASTER	0x1000
-
-/* 1000BASE-T Status register */
-#define LPA_1000LOCALRXOK	0x2000	/* Link partner local receiver status */
-#define LPA_1000REMRXOK		0x1000	/* Link partner remote receiver status */
-#define LPA_1000FULL		0x0800	/* Link partner 1000BASE-T full duplex */
-#define LPA_1000HALF		0x0400	/* Link partner 1000BASE-T half duplex */
-
-/* Flow control flags */
-#define FLOW_CTRL_TX		0x01
-#define FLOW_CTRL_RX		0x02
-
-/* MMD Access Control register fields */
-#define MII_MMD_CTRL_DEVAD_MASK	0x1f	/* Mask MMD DEVAD*/
-#define MII_MMD_CTRL_ADDR	0x0000	/* Address */
-#define MII_MMD_CTRL_NOINCR	0x4000	/* no post increment */
-#define MII_MMD_CTRL_INCR_RDWT	0x8000	/* post increment on reads & writes */
-#define MII_MMD_CTRL_INCR_ON_WT	0xC000	/* post increment on writes only */
-
-/* This structure is used in all SIOCxMIIxxx ioctl calls */
-struct mii_ioctl_data {
-	__u16		phy_id;
-	__u16		reg_num;
-	__u16		val_in;
-	__u16		val_out;
-};
-
-#ifdef __KERNEL__
 
 #include <linux/if.h>
+#include <uapi/linux/mii.h>
 
 struct ethtool_cmd;
 
@@ -487,5 +336,4 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
 	return cap;
 }
 
-#endif /* __KERNEL__ */
 #endif /* __LINUX_MII_H__ */
diff --git a/include/linux/minix_fs.h b/include/linux/minix_fs.h
deleted file mode 100644
index 13fe09e0576a..000000000000
--- a/include/linux/minix_fs.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef _LINUX_MINIX_FS_H
-#define _LINUX_MINIX_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/*
- * The minix filesystem constants/structures
- */
-
-/*
- * Thanks to Kees J Bot for sending me the definitions of the new
- * minix filesystem (aka V2) with bigger inodes and 32-bit block
- * pointers.
- */
-
-#define MINIX_ROOT_INO 1
-
-/* Not the same as the bogus LINK_MAX in <linux/limits.h>. Oh well. */
-#define MINIX_LINK_MAX	250
-#define MINIX2_LINK_MAX	65530
-
-#define MINIX_I_MAP_SLOTS	8
-#define MINIX_Z_MAP_SLOTS	64
-#define MINIX_VALID_FS		0x0001		/* Clean fs. */
-#define MINIX_ERROR_FS		0x0002		/* fs has errors. */
-
-#define MINIX_INODES_PER_BLOCK ((BLOCK_SIZE)/(sizeof (struct minix_inode)))
-
-/*
- * This is the original minix inode layout on disk.
- * Note the 8-bit gid and atime and ctime.
- */
-struct minix_inode {
-	__u16 i_mode;
-	__u16 i_uid;
-	__u32 i_size;
-	__u32 i_time;
-	__u8  i_gid;
-	__u8  i_nlinks;
-	__u16 i_zone[9];
-};
-
-/*
- * The new minix inode has all the time entries, as well as
- * long block numbers and a third indirect block (7+1+1+1
- * instead of 7+1+1). Also, some previously 8-bit values are
- * now 16-bit. The inode is now 64 bytes instead of 32.
- */
-struct minix2_inode {
-	__u16 i_mode;
-	__u16 i_nlinks;
-	__u16 i_uid;
-	__u16 i_gid;
-	__u32 i_size;
-	__u32 i_atime;
-	__u32 i_mtime;
-	__u32 i_ctime;
-	__u32 i_zone[10];
-};
-
-/*
- * minix super-block data on disk
- */
-struct minix_super_block {
-	__u16 s_ninodes;
-	__u16 s_nzones;
-	__u16 s_imap_blocks;
-	__u16 s_zmap_blocks;
-	__u16 s_firstdatazone;
-	__u16 s_log_zone_size;
-	__u32 s_max_size;
-	__u16 s_magic;
-	__u16 s_state;
-	__u32 s_zones;
-};
-
-/*
- * V3 minix super-block data on disk
- */
-struct minix3_super_block {
-	__u32 s_ninodes;
-	__u16 s_pad0;
-	__u16 s_imap_blocks;
-	__u16 s_zmap_blocks;
-	__u16 s_firstdatazone;
-	__u16 s_log_zone_size;
-	__u16 s_pad1;
-	__u32 s_max_size;
-	__u32 s_zones;
-	__u16 s_magic;
-	__u16 s_pad2;
-	__u16 s_blocksize;
-	__u8  s_disk_version;
-};
-
-struct minix_dir_entry {
-	__u16 inode;
-	char name[0];
-};
-
-struct minix3_dir_entry {
-	__u32 inode;
-	char name[0];
-};
-#endif
diff --git a/include/linux/mman.h b/include/linux/mman.h
index 77cec2f45cb7..d09dde1e57fb 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -1,20 +1,11 @@
 #ifndef _LINUX_MMAN_H
 #define _LINUX_MMAN_H
 
-#include <asm/mman.h>
-
-#define MREMAP_MAYMOVE	1
-#define MREMAP_FIXED	2
-
-#define OVERCOMMIT_GUESS		0
-#define OVERCOMMIT_ALWAYS		1
-#define OVERCOMMIT_NEVER		2
-
-#ifdef __KERNEL__
 #include <linux/mm.h>
 #include <linux/percpu_counter.h>
 
 #include <linux/atomic.h>
+#include <uapi/linux/mman.h>
 
 extern int sysctl_overcommit_memory;
 extern int sysctl_overcommit_ratio;
@@ -88,5 +79,4 @@ calc_vm_flag_bits(unsigned long flags)
 	       _calc_vm_trans(flags, MAP_DENYWRITE,  VM_DENYWRITE ) |
 	       _calc_vm_trans(flags, MAP_LOCKED,     VM_LOCKED    );
 }
-#endif /* __KERNEL__ */
 #endif /* _LINUX_MMAN_H */
diff --git a/include/linux/mmtimer.h b/include/linux/mmtimer.h
deleted file mode 100644
index 884cabf16088..000000000000
--- a/include/linux/mmtimer.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Intel Multimedia Timer device interface
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
- *
- * This file should define an interface compatible with the IA-PC Multimedia
- * Timers Draft Specification (rev. 0.97) from Intel.  Note that some
- * hardware may not be able to safely export its registers to userspace,
- * so the ioctl interface should support all necessary functionality.
- *
- * 11/01/01 - jbarnes - initial revision
- * 9/10/04 - Christoph Lameter - remove interrupt support
- * 9/17/04 - jbarnes - remove test program, move some #defines to the driver
- */
-
-#ifndef _LINUX_MMTIMER_H
-#define _LINUX_MMTIMER_H
-
-/*
- * Breakdown of the ioctl's available.  An 'optional' next to the command
- * indicates that supporting this command is optional, while 'required'
- * commands must be implemented if conformance is desired.
- *
- * MMTIMER_GETOFFSET - optional
- *   Should return the offset (relative to the start of the page where the
- *   registers are mapped) for the counter in question.
- *
- * MMTIMER_GETRES - required
- *   The resolution of the clock in femto (10^-15) seconds
- *
- * MMTIMER_GETFREQ - required
- *   Frequency of the clock in Hz
- *
- * MMTIMER_GETBITS - required
- *   Number of bits in the clock's counter
- *
- * MMTIMER_MMAPAVAIL - required
- *   Returns nonzero if the registers can be mmap'd into userspace, 0 otherwise
- *
- * MMTIMER_GETCOUNTER - required
- *   Gets the current value in the counter
- */
-#define MMTIMER_IOCTL_BASE 'm'
-
-#define MMTIMER_GETOFFSET _IO(MMTIMER_IOCTL_BASE, 0)
-#define MMTIMER_GETRES _IOR(MMTIMER_IOCTL_BASE, 1, unsigned long)
-#define MMTIMER_GETFREQ _IOR(MMTIMER_IOCTL_BASE, 2, unsigned long)
-#define MMTIMER_GETBITS _IO(MMTIMER_IOCTL_BASE, 4)
-#define MMTIMER_MMAPAVAIL _IO(MMTIMER_IOCTL_BASE, 6)
-#define MMTIMER_GETCOUNTER _IOR(MMTIMER_IOCTL_BASE, 9, unsigned long)
-
-#endif /* _LINUX_MMTIMER_H */
diff --git a/include/linux/mqueue.h b/include/linux/mqueue.h
deleted file mode 100644
index 8b5a79615fbf..000000000000
--- a/include/linux/mqueue.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Copyright (C) 2003 Krzysztof Benedyczak & Michal Wronski
-
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   It is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with this software; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _LINUX_MQUEUE_H
-#define _LINUX_MQUEUE_H
-
-#define MQ_PRIO_MAX 	32768
-/* per-uid limit of kernel memory used by mqueue, in bytes */
-#define MQ_BYTES_MAX	819200
-
-struct mq_attr {
-	long	mq_flags;	/* message queue flags			*/
-	long	mq_maxmsg;	/* maximum number of messages		*/
-	long	mq_msgsize;	/* maximum message size			*/
-	long	mq_curmsgs;	/* number of messages currently queued	*/
-	long	__reserved[4];	/* ignored for input, zeroed for output */
-};
-
-/*
- * SIGEV_THREAD implementation:
- * SIGEV_THREAD must be implemented in user space. If SIGEV_THREAD is passed
- * to mq_notify, then
- * - sigev_signo must be the file descriptor of an AF_NETLINK socket. It's not
- *   necessary that the socket is bound.
- * - sigev_value.sival_ptr must point to a cookie that is NOTIFY_COOKIE_LEN
- *   bytes long.
- * If the notification is triggered, then the cookie is sent to the netlink
- * socket. The last byte of the cookie is replaced with the NOTIFY_?? codes:
- * NOTIFY_WOKENUP if the notification got triggered, NOTIFY_REMOVED if it was
- * removed, either due to a close() on the message queue fd or due to a
- * mq_notify() that removed the notification.
- */
-#define NOTIFY_NONE	0
-#define NOTIFY_WOKENUP	1
-#define NOTIFY_REMOVED	2
-
-#define NOTIFY_COOKIE_LEN	32
-
-#endif
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 46caaf44339d..ea00d9162ee5 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -1,138 +1,10 @@
 #ifndef __LINUX_MROUTE_H
 #define __LINUX_MROUTE_H
 
-#include <linux/sockios.h>
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/in.h>
-#endif
-
-/*
- *	Based on the MROUTING 3.5 defines primarily to keep
- *	source compatibility with BSD.
- *
- *	See the mrouted code for the original history.
- *
- *      Protocol Independent Multicast (PIM) data structures included
- *      Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT_BASE	200
-#define MRT_INIT	(MRT_BASE)	/* Activate the kernel mroute code 	*/
-#define MRT_DONE	(MRT_BASE+1)	/* Shutdown the kernel mroute		*/
-#define MRT_ADD_VIF	(MRT_BASE+2)	/* Add a virtual interface		*/
-#define MRT_DEL_VIF	(MRT_BASE+3)	/* Delete a virtual interface		*/
-#define MRT_ADD_MFC	(MRT_BASE+4)	/* Add a multicast forwarding entry	*/
-#define MRT_DEL_MFC	(MRT_BASE+5)	/* Delete a multicast forwarding entry	*/
-#define MRT_VERSION	(MRT_BASE+6)	/* Get the kernel multicast version	*/
-#define MRT_ASSERT	(MRT_BASE+7)	/* Activate PIM assert mode		*/
-#define MRT_PIM		(MRT_BASE+8)	/* enable PIM code			*/
-#define MRT_TABLE	(MRT_BASE+9)	/* Specify mroute table ID		*/
-
-#define SIOCGETVIFCNT	SIOCPROTOPRIVATE	/* IP protocol privates */
-#define SIOCGETSGCNT	(SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
-
-#define MAXVIFS		32	
-typedef unsigned long vifbitmap_t;	/* User mode code depends on this lot */
-typedef unsigned short vifi_t;
-#define ALL_VIFS	((vifi_t)(-1))
-
-/*
- *	Same idea as select
- */
- 
-#define VIFM_SET(n,m)	((m)|=(1<<(n)))
-#define VIFM_CLR(n,m)	((m)&=~(1<<(n)))
-#define VIFM_ISSET(n,m)	((m)&(1<<(n)))
-#define VIFM_CLRALL(m)	((m)=0)
-#define VIFM_COPY(mfrom,mto)	((mto)=(mfrom))
-#define VIFM_SAME(m1,m2)	((m1)==(m2))
-
-/*
- *	Passed by mrouted for an MRT_ADD_VIF - again we use the
- *	mrouted 3.6 structures for compatibility
- */
- 
-struct vifctl {
-	vifi_t	vifc_vifi;		/* Index of VIF */
-	unsigned char vifc_flags;	/* VIFF_ flags */
-	unsigned char vifc_threshold;	/* ttl limit */
-	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
-	union {
-		struct in_addr vifc_lcl_addr;     /* Local interface address */
-		int            vifc_lcl_ifindex;  /* Local interface index   */
-	};
-	struct in_addr vifc_rmt_addr;	/* IPIP tunnel addr */
-};
-
-#define VIFF_TUNNEL		0x1	/* IPIP tunnel */
-#define VIFF_SRCRT		0x2	/* NI */
-#define VIFF_REGISTER		0x4	/* register vif	*/
-#define VIFF_USE_IFINDEX	0x8	/* use vifc_lcl_ifindex instead of
-					   vifc_lcl_addr to find an interface */
-
-/*
- *	Cache manipulation structures for mrouted and PIMd
- */
- 
-struct mfcctl {
-	struct in_addr mfcc_origin;		/* Origin of mcast	*/
-	struct in_addr mfcc_mcastgrp;		/* Group in question	*/
-	vifi_t	mfcc_parent;			/* Where it arrived	*/
-	unsigned char mfcc_ttls[MAXVIFS];	/* Where it is going	*/
-	unsigned int mfcc_pkt_cnt;		/* pkt count for src-grp */
-	unsigned int mfcc_byte_cnt;
-	unsigned int mfcc_wrong_if;
-	int	     mfcc_expire;
-};
-
-/* 
- *	Group count retrieval for mrouted
- */
- 
-struct sioc_sg_req {
-	struct in_addr src;
-	struct in_addr grp;
-	unsigned long pktcnt;
-	unsigned long bytecnt;
-	unsigned long wrong_if;
-};
-
-/*
- *	To get vif packet counts
- */
-
-struct sioc_vif_req {
-	vifi_t	vifi;		/* Which iface */
-	unsigned long icount;	/* In packets */
-	unsigned long ocount;	/* Out packets */
-	unsigned long ibytes;	/* In bytes */
-	unsigned long obytes;	/* Out bytes */
-};
-
-/*
- *	This is the format the mroute daemon expects to see IGMP control
- *	data. Magically happens to be like an IP packet as per the original
- */
- 
-struct igmpmsg {
-	__u32 unused1,unused2;
-	unsigned char im_msgtype;		/* What is this */
-	unsigned char im_mbz;			/* Must be zero */
-	unsigned char im_vif;			/* Interface (this ought to be a vifi_t!) */
-	unsigned char unused3;
-	struct in_addr im_src,im_dst;
-};
-
-/*
- *	That's all usermode folks
- */
-
-#ifdef __KERNEL__
 #include <linux/pim.h>
 #include <net/sock.h>
+#include <uapi/linux/mroute.h>
 
 #ifdef CONFIG_IP_MROUTE
 static inline int ip_mroute_opt(int opt)
@@ -228,24 +100,8 @@ struct mfc_cache {
 #define MFC_HASH(a,b)	((((__force u32)(__be32)a)^(((__force u32)(__be32)b)>>2))&(MFC_LINES-1))
 #endif		
 
-#endif
-
-
-#define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
-
-/*
- *	Pseudo messages used by mrouted
- */
-
-#define IGMPMSG_NOCACHE		1		/* Kern cache fill request to mrouted */
-#define IGMPMSG_WRONGVIF	2		/* For PIM assert processing (unused) */
-#define IGMPMSG_WHOLEPKT	3		/* For PIM Register processing */
-
-#ifdef __KERNEL__
 struct rtmsg;
 extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
 			  __be32 saddr, __be32 daddr,
 			  struct rtmsg *rtm, int nowait);
 #endif
-
-#endif
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 6d8c7251eb8d..a223561ba12e 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -1,123 +1,11 @@
 #ifndef __LINUX_MROUTE6_H
 #define __LINUX_MROUTE6_H
 
-#include <linux/types.h>
-#include <linux/sockios.h>
-
-/*
- *	Based on the MROUTING 3.5 defines primarily to keep
- *	source compatibility with BSD.
- *
- *	See the pim6sd code for the original history.
- *
- *      Protocol Independent Multicast (PIM) data structures included
- *      Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT6_BASE	200
-#define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/
-#define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/
-#define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/
-#define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/
-#define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/
-#define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/
-#define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/
-#define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
-#define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
-#define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
-
-#define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
-#define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
-
-#define MAXMIFS		32
-typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */
-typedef unsigned short mifi_t;
-#define ALL_MIFS	((mifi_t)(-1))
-
-#ifndef IF_SETSIZE
-#define IF_SETSIZE	256
-#endif
-
-typedef	__u32		if_mask;
-#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
-
-#if !defined(__KERNEL__)
-#if !defined(DIV_ROUND_UP)
-#define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y))
-#endif
-#endif
-
-typedef struct if_set {
-	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
-} if_set;
-
-#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
-#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
-#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
-#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
-#define IF_ZERO(p)      bzero(p, sizeof(*(p)))
-
-/*
- *	Passed by mrouted for an MRT_ADD_MIF - again we use the
- *	mrouted 3.6 structures for compatibility
- */
-
-struct mif6ctl {
-	mifi_t	mif6c_mifi;		/* Index of MIF */
-	unsigned char mif6c_flags;	/* MIFF_ flags */
-	unsigned char vifc_threshold;	/* ttl limit */
-	__u16	 mif6c_pifi;		/* the index of the physical IF */
-	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
-};
-
-#define MIFF_REGISTER	0x1	/* register vif	*/
-
-/*
- *	Cache manipulation structures for mrouted and PIMd
- */
-
-struct mf6cctl {
-	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
-	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
-	mifi_t	mf6cc_parent;			/* Where it arrived	*/
-	struct if_set mf6cc_ifset;		/* Where it is going */
-};
-
-/*
- *	Group count retrieval for pim6sd
- */
-
-struct sioc_sg_req6 {
-	struct sockaddr_in6 src;
-	struct sockaddr_in6 grp;
-	unsigned long pktcnt;
-	unsigned long bytecnt;
-	unsigned long wrong_if;
-};
-
-/*
- *	To get vif packet counts
- */
-
-struct sioc_mif_req6 {
-	mifi_t	mifi;		/* Which iface */
-	unsigned long icount;	/* In packets */
-	unsigned long ocount;	/* Out packets */
-	unsigned long ibytes;	/* In bytes */
-	unsigned long obytes;	/* Out bytes */
-};
-
-/*
- *	That's all usermode folks
- */
-
-#ifdef __KERNEL__
 
 #include <linux/pim.h>
 #include <linux/skbuff.h>	/* for struct sk_buff_head */
 #include <net/net_namespace.h>
+#include <uapi/linux/mroute6.h>
 
 #ifdef CONFIG_IPV6_MROUTE
 static inline int ip6_mroute_opt(int opt)
@@ -225,9 +113,6 @@ struct mfc6_cache {
 
 #define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
 
-#endif
-
-#ifdef __KERNEL__
 struct rtmsg;
 extern int ip6mr_get_route(struct net *net, struct sk_buff *skb,
 			   struct rtmsg *rtm, int nowait);
@@ -246,24 +131,3 @@ static inline int ip6mr_sk_done(struct sock *sk)
 }
 #endif
 #endif
-
-/*
- * Structure used to communicate from kernel to multicast router.
- * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
- * used for IPv4 implementation). This is because this structure will be passed via an
- * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
- * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
- */
-
-struct mrt6msg {
-#define MRT6MSG_NOCACHE		1
-#define MRT6MSG_WRONGMIF	2
-#define MRT6MSG_WHOLEPKT	3		/* used for use level encap */
-	__u8		im6_mbz;		/* must be zero		   */
-	__u8		im6_msgtype;		/* what type of message    */
-	__u16		im6_mif;		/* mif rec'd on		   */
-	__u32		im6_pad;		/* padding for 64 bit arch */
-	struct in6_addr	im6_src, im6_dst;
-};
-
-#endif
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index 11cc2ac67e75..e1b163f912fb 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -1,174 +1,11 @@
 #ifndef _LINUX_MSDOS_FS_H
 #define _LINUX_MSDOS_FS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/msdos_fs.h>
 
-/*
- * The MS-DOS filesystem constants/structures
- */
-
-#define SECTOR_SIZE	512		/* sector size (bytes) */
-#define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
-#define MSDOS_DPB	(MSDOS_DPS)	/* dir entries per block */
-#define MSDOS_DPB_BITS	4		/* log2(MSDOS_DPB) */
-#define MSDOS_DPS	(SECTOR_SIZE / sizeof(struct msdos_dir_entry))
-#define MSDOS_DPS_BITS	4		/* log2(MSDOS_DPS) */
-#define MSDOS_LONGNAME	256		/* maximum name length */
-#define CF_LE_W(v)	le16_to_cpu(v)
-#define CF_LE_L(v)	le32_to_cpu(v)
-#define CT_LE_W(v)	cpu_to_le16(v)
-#define CT_LE_L(v)	cpu_to_le32(v)
-
-#define MSDOS_ROOT_INO	 1	/* The root inode number */
-#define MSDOS_FSINFO_INO 2	/* Used for managing the FSINFO block */
-
-#define MSDOS_DIR_BITS	5	/* log2(sizeof(struct msdos_dir_entry)) */
-
-/* directory limit */
-#define FAT_MAX_DIR_ENTRIES	(65536)
-#define FAT_MAX_DIR_SIZE	(FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
-
-#define ATTR_NONE	0	/* no attribute bits */
-#define ATTR_RO		1	/* read-only */
-#define ATTR_HIDDEN	2	/* hidden */
-#define ATTR_SYS	4	/* system */
-#define ATTR_VOLUME	8	/* volume label */
-#define ATTR_DIR	16	/* directory */
-#define ATTR_ARCH	32	/* archived */
-
-/* attribute bits that are copied "as is" */
-#define ATTR_UNUSED	(ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
-/* bits that are used by the Windows 95/Windows NT extended FAT */
-#define ATTR_EXT	(ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
-
-#define CASE_LOWER_BASE	8	/* base is lower case */
-#define CASE_LOWER_EXT	16	/* extension is lower case */
-
-#define DELETED_FLAG	0xe5	/* marks file as deleted when in name[0] */
-#define IS_FREE(n)	(!*(n) || *(n) == DELETED_FLAG)
-
-#define FAT_LFN_LEN	255	/* maximum long name length */
-#define MSDOS_NAME	11	/* maximum name length */
-#define MSDOS_SLOTS	21	/* max # of slots for short and long names */
-#define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
-#define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
-
-#define FAT_FIRST_ENT(s, x)	((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
-	MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
-
-/* start of data cluster's entry (number of reserved clusters) */
-#define FAT_START_ENT	2
-
-/* maximum number of clusters */
-#define MAX_FAT12	0xFF4
-#define MAX_FAT16	0xFFF4
-#define MAX_FAT32	0x0FFFFFF6
-#define MAX_FAT(s)	(MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
-	MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
-
-/* bad cluster mark */
-#define BAD_FAT12	0xFF7
-#define BAD_FAT16	0xFFF7
-#define BAD_FAT32	0x0FFFFFF7
-
-/* standard EOF */
-#define EOF_FAT12	0xFFF
-#define EOF_FAT16	0xFFFF
-#define EOF_FAT32	0x0FFFFFFF
-
-#define FAT_ENT_FREE	(0)
-#define FAT_ENT_BAD	(BAD_FAT32)
-#define FAT_ENT_EOF	(EOF_FAT32)
-
-#define FAT_FSINFO_SIG1	0x41615252
-#define FAT_FSINFO_SIG2	0x61417272
-#define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
-			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
-
-struct __fat_dirent {
-	long		d_ino;
-	__kernel_off_t	d_off;
-	unsigned short	d_reclen;
-	char		d_name[256]; /* We must not include limits.h! */
-};
-
-/*
- * ioctl commands
- */
-#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct __fat_dirent[2])
-#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct __fat_dirent[2])
-/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
-#define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
-#define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
-
-struct fat_boot_sector {
-	__u8	ignored[3];	/* Boot strap short or near jump */
-	__u8	system_id[8];	/* Name - can be used to special case
-				   partition manager volumes */
-	__u8	sector_size[2];	/* bytes per logical sector */
-	__u8	sec_per_clus;	/* sectors/cluster */
-	__le16	reserved;	/* reserved sectors */
-	__u8	fats;		/* number of FATs */
-	__u8	dir_entries[2];	/* root directory entries */
-	__u8	sectors[2];	/* number of sectors */
-	__u8	media;		/* media code */
-	__le16	fat_length;	/* sectors/FAT */
-	__le16	secs_track;	/* sectors per track */
-	__le16	heads;		/* number of heads */
-	__le32	hidden;		/* hidden sectors (unused) */
-	__le32	total_sect;	/* number of sectors (if sectors == 0) */
-
-	/* The following fields are only used by FAT32 */
-	__le32	fat32_length;	/* sectors/FAT */
-	__le16	flags;		/* bit 8: fat mirroring, low 4: active fat */
-	__u8	version[2];	/* major, minor filesystem version */
-	__le32	root_cluster;	/* first cluster in root directory */
-	__le16	info_sector;	/* filesystem info sector */
-	__le16	backup_boot;	/* backup boot sector */
-	__le16	reserved2[6];	/* Unused */
-};
-
-struct fat_boot_fsinfo {
-	__le32   signature1;	/* 0x41615252L */
-	__le32   reserved1[120];	/* Nothing as far as I can tell */
-	__le32   signature2;	/* 0x61417272L */
-	__le32   free_clusters;	/* Free cluster count.  -1 if unknown */
-	__le32   next_cluster;	/* Most recently allocated cluster */
-	__le32   reserved2[4];
-};
-
-struct msdos_dir_entry {
-	__u8	name[MSDOS_NAME];/* name and extension */
-	__u8	attr;		/* attribute bits */
-	__u8    lcase;		/* Case for base and extension */
-	__u8	ctime_cs;	/* Creation time, centiseconds (0-199) */
-	__le16	ctime;		/* Creation time */
-	__le16	cdate;		/* Creation date */
-	__le16	adate;		/* Last access date */
-	__le16	starthi;	/* High 16 bits of cluster in FAT32 */
-	__le16	time,date,start;/* time, date and first cluster */
-	__le32	size;		/* file size (in bytes) */
-};
-
-/* Up to 13 characters of the name */
-struct msdos_dir_slot {
-	__u8    id;		/* sequence number for slot */
-	__u8    name0_4[10];	/* first 5 characters in name */
-	__u8    attr;		/* attribute byte */
-	__u8    reserved;	/* always 0 */
-	__u8    alias_checksum;	/* checksum for 8.3 alias */
-	__u8    name5_10[12];	/* 6 more characters in name */
-	__le16   start;		/* starting cluster number, 0 in long slots */
-	__u8    name11_12[4];	/* last 2 characters in name */
-};
-
-#ifdef __KERNEL__
 /* media of boot sector */
 static inline int fat_valid_media(u8 media)
 {
 	return 0xf8 <= media || media == 0xf0;
 }
-#endif /* !__KERNEL__ */
 #endif /* !_LINUX_MSDOS_FS_H */
diff --git a/include/linux/msg.h b/include/linux/msg.h
index 56abf1558fdd..7a4b9e97d29a 100644
--- a/include/linux/msg.h
+++ b/include/linux/msg.h
@@ -1,78 +1,8 @@
 #ifndef _LINUX_MSG_H
 #define _LINUX_MSG_H
 
-#include <linux/ipc.h>
-
-/* ipcs ctl commands */
-#define MSG_STAT 11
-#define MSG_INFO 12
-
-/* msgrcv options */
-#define MSG_NOERROR     010000  /* no error if message is too big */
-#define MSG_EXCEPT      020000  /* recv any msg except of specified type.*/
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct msqid_ds {
-	struct ipc_perm msg_perm;
-	struct msg *msg_first;		/* first message on queue,unused  */
-	struct msg *msg_last;		/* last message in queue,unused */
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long  msg_lcbytes;	/* Reuse junk fields for 32 bit */
-	unsigned long  msg_lqbytes;	/* ditto */
-	unsigned short msg_cbytes;	/* current number of bytes on queue */
-	unsigned short msg_qnum;	/* number of messages in queue */
-	unsigned short msg_qbytes;	/* max number of bytes on queue */
-	__kernel_ipc_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_ipc_pid_t msg_lrpid;	/* last receive pid */
-};
-
-/* Include the definition of msqid64_ds */
-#include <asm/msgbuf.h>
-
-/* message buffer for msgsnd and msgrcv calls */
-struct msgbuf {
-	long mtype;         /* type of message */
-	char mtext[1];      /* message text */
-};
-
-/* buffer for msgctl calls IPC_INFO, MSG_INFO */
-struct msginfo {
-	int msgpool;
-	int msgmap; 
-	int msgmax; 
-	int msgmnb; 
-	int msgmni; 
-	int msgssz; 
-	int msgtql; 
-	unsigned short  msgseg; 
-};
-
-/*
- * Scaling factor to compute msgmni:
- * the memory dedicated to msg queues (msgmni * msgmnb) should occupy
- * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c):
- * up to 8MB       : msgmni = 16 (MSGMNI)
- * 4 GB            : msgmni = 8K
- * more than 16 GB : msgmni = 32K (IPCMNI)
- */
-#define MSG_MEM_SCALE 32
-
-#define MSGMNI    16   /* <= IPCMNI */     /* max # of msg queue identifiers */
-#define MSGMAX  8192   /* <= INT_MAX */   /* max size of message (bytes) */
-#define MSGMNB 16384   /* <= INT_MAX */   /* default max size of a message queue */
-
-/* unused */
-#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
-#define MSGTQL  MSGMNB            /* number of system message headers */
-#define MSGMAP  MSGMNB            /* number of entries in message map */
-#define MSGSSZ  16                /* message segment size */
-#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
-#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
-
-#ifdef __KERNEL__
 #include <linux/list.h>
+#include <uapi/linux/msg.h>
 
 /* one msg_msg structure for each message */
 struct msg_msg {
@@ -107,6 +37,4 @@ extern long do_msgsnd(int msqid, long mtype, void __user *mtext,
 extern long do_msgrcv(int msqid, long *pmtype, void __user *mtext,
 			size_t msgsz, long msgtyp, int msgflg);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_MSG_H */
diff --git a/include/linux/mtio.h b/include/linux/mtio.h
deleted file mode 100644
index 18543e2db06f..000000000000
--- a/include/linux/mtio.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/* 
- * linux/mtio.h header file for Linux. Written by H. Bergman
- *
- * Modified for special ioctls provided by zftape in September 1997
- * by C.-J. Heine.
- */
-
-#ifndef _LINUX_MTIO_H
-#define _LINUX_MTIO_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-/*
- * Structures and definitions for mag tape io control commands
- */
-
-/* structure for MTIOCTOP - mag tape op command */
-struct	mtop {
-	short	mt_op;		/* operations defined below */
-	int	mt_count;	/* how many of them */
-};
-
-/* Magnetic Tape operations [Not all operations supported by all drivers]: */
-#define MTRESET 0	/* +reset drive in case of problems */
-#define MTFSF	1	/* forward space over FileMark,
-			 * position at first record of next file 
-			 */
-#define MTBSF	2	/* backward space FileMark (position before FM) */
-#define MTFSR	3	/* forward space record */
-#define MTBSR	4	/* backward space record */
-#define MTWEOF	5	/* write an end-of-file record (mark) */
-#define MTREW	6	/* rewind */
-#define MTOFFL	7	/* rewind and put the drive offline (eject?) */
-#define MTNOP	8	/* no op, set status only (read with MTIOCGET) */
-#define MTRETEN 9	/* retension tape */
-#define MTBSFM	10	/* +backward space FileMark, position at FM */
-#define MTFSFM  11	/* +forward space FileMark, position at FM */
-#define MTEOM	12	/* goto end of recorded media (for appending files).
-			 * MTEOM positions after the last FM, ready for
-			 * appending another file.
-			 */
-#define MTERASE 13	/* erase tape -- be careful! */
-
-#define MTRAS1  14	/* run self test 1 (nondestructive) */
-#define MTRAS2	15	/* run self test 2 (destructive) */
-#define MTRAS3  16	/* reserved for self test 3 */
-
-#define MTSETBLK 20	/* set block length (SCSI) */
-#define MTSETDENSITY 21	/* set tape density (SCSI) */
-#define MTSEEK	22	/* seek to block (Tandberg, etc.) */
-#define MTTELL	23	/* tell block (Tandberg, etc.) */
-#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */
-			/* ordinary buffered operation with code 1 */
-#define MTFSS	25	/* space forward over setmarks */
-#define MTBSS	26	/* space backward over setmarks */
-#define MTWSM	27	/* write setmarks */
-
-#define MTLOCK  28	/* lock the drive door */
-#define MTUNLOCK 29	/* unlock the drive door */
-#define MTLOAD  30	/* execute the SCSI load command */
-#define MTUNLOAD 31	/* execute the SCSI unload command */
-#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */
-#define MTSETPART 33	/* Change the active tape partition */
-#define MTMKPART  34	/* Format the tape with one or two partitions */
-#define MTWEOFI	35	/* write an end-of-file record (mark) in immediate mode */
-
-/* structure for MTIOCGET - mag tape get status command */
-
-struct	mtget {
-	long	mt_type;	/* type of magtape device */
-	long	mt_resid;	/* residual count: (not sure)
-				 *	number of bytes ignored, or
-				 *	number of files not skipped, or
-				 *	number of records not skipped.
-				 */
-	/* the following registers are device dependent */
-	long	mt_dsreg;	/* status register */
-	long	mt_gstat;	/* generic (device independent) status */
-	long	mt_erreg;	/* error register */
-	/* The next two fields are not always used */
-	__kernel_daddr_t mt_fileno;	/* number of current file on tape */
-	__kernel_daddr_t mt_blkno;	/* current block number */
-};
-
-
-
-/*
- * Constants for mt_type. Not all of these are supported,
- * and these are not all of the ones that are supported.
- */
-#define MT_ISUNKNOWN		0x01
-#define MT_ISQIC02		0x02	/* Generic QIC-02 tape streamer */
-#define MT_ISWT5150		0x03	/* Wangtek 5150EQ, QIC-150, QIC-02 */
-#define MT_ISARCHIVE_5945L2	0x04	/* Archive 5945L-2, QIC-24, QIC-02? */
-#define MT_ISCMSJ500		0x05	/* CMS Jumbo 500 (QIC-02?) */
-#define MT_ISTDC3610		0x06	/* Tandberg 6310, QIC-24 */
-#define MT_ISARCHIVE_VP60I	0x07	/* Archive VP60i, QIC-02 */
-#define MT_ISARCHIVE_2150L	0x08	/* Archive Viper 2150L */
-#define MT_ISARCHIVE_2060L	0x09	/* Archive Viper 2060L */
-#define MT_ISARCHIVESC499	0x0A	/* Archive SC-499 QIC-36 controller */
-#define MT_ISQIC02_ALL_FEATURES	0x0F	/* Generic QIC-02 with all features */
-#define MT_ISWT5099EEN24	0x11	/* Wangtek 5099-een24, 60MB, QIC-24 */
-#define MT_ISTEAC_MT2ST		0x12	/* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */
-#define MT_ISEVEREX_FT40A	0x32	/* Everex FT40A (QIC-40) */
-#define MT_ISDDS1		0x51	/* DDS device without partitions */
-#define MT_ISDDS2		0x52	/* DDS device with partitions */
-#define MT_ISONSTREAM_SC        0x61   /* OnStream SCSI tape drives (SC-x0)
-					  and SCSI emulated (DI, DP, USB) */
-#define MT_ISSCSI1		0x71	/* Generic ANSI SCSI-1 tape unit */
-#define MT_ISSCSI2		0x72	/* Generic ANSI SCSI-2 tape unit */
-
-/* QIC-40/80/3010/3020 ftape supported drives.
- * 20bit vendor ID + 0x800000 (see ftape-vendors.h)
- */
-#define MT_ISFTAPE_UNKNOWN	0x800000 /* obsolete */
-#define MT_ISFTAPE_FLAG	0x800000
-
-
-/* structure for MTIOCPOS - mag tape get position command */
-
-struct	mtpos {
-	long 	mt_blkno;	/* current block number */
-};
-
-
-/* mag tape io control commands */
-#define	MTIOCTOP	_IOW('m', 1, struct mtop)	/* do a mag tape op */
-#define	MTIOCGET	_IOR('m', 2, struct mtget)	/* get tape status */
-#define	MTIOCPOS	_IOR('m', 3, struct mtpos)	/* get tape position */
-
-
-/* Generic Mag Tape (device independent) status macros for examining
- * mt_gstat -- HP-UX compatible.
- * There is room for more generic status bits here, but I don't
- * know which of them are reserved. At least three or so should
- * be added to make this really useful.
- */
-#define GMT_EOF(x)              ((x) & 0x80000000)
-#define GMT_BOT(x)              ((x) & 0x40000000)
-#define GMT_EOT(x)              ((x) & 0x20000000)
-#define GMT_SM(x)               ((x) & 0x10000000)  /* DDS setmark */
-#define GMT_EOD(x)              ((x) & 0x08000000)  /* DDS EOD */
-#define GMT_WR_PROT(x)          ((x) & 0x04000000)
-/* #define GMT_ ? 		((x) & 0x02000000) */
-#define GMT_ONLINE(x)           ((x) & 0x01000000)
-#define GMT_D_6250(x)           ((x) & 0x00800000)
-#define GMT_D_1600(x)           ((x) & 0x00400000)
-#define GMT_D_800(x)            ((x) & 0x00200000)
-/* #define GMT_ ? 		((x) & 0x00100000) */
-/* #define GMT_ ? 		((x) & 0x00080000) */
-#define GMT_DR_OPEN(x)          ((x) & 0x00040000)  /* door open (no tape) */
-/* #define GMT_ ? 		((x) & 0x00020000) */
-#define GMT_IM_REP_EN(x)        ((x) & 0x00010000)  /* immediate report mode */
-#define GMT_CLN(x)              ((x) & 0x00008000)  /* cleaning requested */
-/* 15 generic status bits unused */
-
-
-/* SCSI-tape specific definitions */
-/* Bitfield shifts in the status  */
-#define MT_ST_BLKSIZE_SHIFT	0
-#define MT_ST_BLKSIZE_MASK	0xffffff
-#define MT_ST_DENSITY_SHIFT	24
-#define MT_ST_DENSITY_MASK	0xff000000
-
-#define MT_ST_SOFTERR_SHIFT	0
-#define MT_ST_SOFTERR_MASK	0xffff
-
-/* Bitfields for the MTSETDRVBUFFER ioctl */
-#define MT_ST_OPTIONS		0xf0000000
-#define MT_ST_BOOLEANS		0x10000000
-#define MT_ST_SETBOOLEANS	0x30000000
-#define MT_ST_CLEARBOOLEANS	0x40000000
-#define MT_ST_WRITE_THRESHOLD	0x20000000
-#define MT_ST_DEF_BLKSIZE	0x50000000
-#define MT_ST_DEF_OPTIONS	0x60000000
-#define MT_ST_TIMEOUTS		0x70000000
-#define MT_ST_SET_TIMEOUT	(MT_ST_TIMEOUTS | 0x000000)
-#define MT_ST_SET_LONG_TIMEOUT	(MT_ST_TIMEOUTS | 0x100000)
-#define MT_ST_SET_CLN		0x80000000
-
-#define MT_ST_BUFFER_WRITES	0x1
-#define MT_ST_ASYNC_WRITES	0x2
-#define MT_ST_READ_AHEAD	0x4
-#define MT_ST_DEBUGGING		0x8
-#define MT_ST_TWO_FM		0x10
-#define MT_ST_FAST_MTEOM	0x20
-#define MT_ST_AUTO_LOCK		0x40
-#define MT_ST_DEF_WRITES	0x80
-#define MT_ST_CAN_BSR		0x100
-#define MT_ST_NO_BLKLIMS	0x200
-#define MT_ST_CAN_PARTITIONS    0x400
-#define MT_ST_SCSI2LOGICAL      0x800
-#define MT_ST_SYSV              0x1000
-#define MT_ST_NOWAIT            0x2000
-#define MT_ST_SILI		0x4000
-#define MT_ST_NOWAIT_EOF	0x8000
-
-/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */
-#define MT_ST_CLEAR_DEFAULT	0xfffff
-#define MT_ST_DEF_DENSITY	(MT_ST_DEF_OPTIONS | 0x100000)
-#define MT_ST_DEF_COMPRESSION	(MT_ST_DEF_OPTIONS | 0x200000)
-#define MT_ST_DEF_DRVBUFFER	(MT_ST_DEF_OPTIONS | 0x300000)
-
-/* The offset for the arguments for the special HP changer load command. */
-#define MT_ST_HPLOADER_OFFSET 10000
-
-#endif /* _LINUX_MTIO_H */
diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
index 54b8e0d8d916..5d0b2a1dee69 100644
--- a/include/linux/n_r3964.h
+++ b/include/linux/n_r3964.h
@@ -43,15 +43,12 @@
  *
  *
  */
-
 #ifndef __LINUX_N_R3964_H__
 #define __LINUX_N_R3964_H__
 
-/* line disciplines for r3964 protocol */
-
-#ifdef __KERNEL__
 
 #include <linux/param.h>
+#include <uapi/linux/n_r3964.h>
 
 /*
  * Common ascii handshake characters:
@@ -73,32 +70,6 @@
 #define R3964_TO_RX_PANIC ((4000)*HZ/1000)
 #define R3964_MAX_RETRIES 5
 
-#endif
-
-/*
- * Ioctl-commands
- */
-
-#define R3964_ENABLE_SIGNALS      0x5301
-#define R3964_SETPRIORITY         0x5302
-#define R3964_USE_BCC             0x5303
-#define R3964_READ_TELEGRAM       0x5304
-
-/* Options for R3964_SETPRIORITY */
-#define R3964_MASTER   0
-#define R3964_SLAVE    1
-
-/* Options for R3964_ENABLE_SIGNALS */
-#define R3964_SIG_ACK   0x0001
-#define R3964_SIG_DATA  0x0002
-#define R3964_SIG_ALL   0x000f
-#define R3964_SIG_NONE  0x0000
-#define R3964_USE_SIGIO 0x1000
-
-/*
- * r3964 operation states:
- */
-#ifdef __KERNEL__
 
 enum { R3964_IDLE, 
 	   R3964_TX_REQUEST, R3964_TRANSMITTING, 
@@ -127,29 +98,6 @@ struct r3964_client_info {
 };
 
 
-#endif
-
-/* types for msg_id: */
-enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
-
-#define R3964_MAX_MSG_COUNT 32
-
-/* error codes for client messages */
-#define R3964_OK 0        /* no error. */
-#define R3964_TX_FAIL -1  /* transmission error, block NOT sent */
-#define R3964_OVERFLOW -2 /* msg queue overflow */
-
-/* the client gets this struct when calling read(fd,...): */
-struct r3964_client_message {
-	  int     msg_id;
-	  int     arg;
-	  int     error_code;
-};
-
-#define R3964_MTU      256
-
-
-#ifdef __KERNEL__
 
 struct r3964_block_header;
 
@@ -226,6 +174,4 @@ struct r3964_info {
 	int nRetry;
 };
 
-#endif	
-
 #endif
diff --git a/include/linux/nbd.h b/include/linux/nbd.h
index 5c86e2b33e2d..4871170a04a0 100644
--- a/include/linux/nbd.h
+++ b/include/linux/nbd.h
@@ -11,45 +11,13 @@
  * 2004/02/19 Paul Clements
  *            Removed PARANOIA, plus various cleanup and comments
  */
-
 #ifndef LINUX_NBD_H
 #define LINUX_NBD_H
 
-#include <linux/types.h>
-
-#define NBD_SET_SOCK	_IO( 0xab, 0 )
-#define NBD_SET_BLKSIZE	_IO( 0xab, 1 )
-#define NBD_SET_SIZE	_IO( 0xab, 2 )
-#define NBD_DO_IT	_IO( 0xab, 3 )
-#define NBD_CLEAR_SOCK	_IO( 0xab, 4 )
-#define NBD_CLEAR_QUE	_IO( 0xab, 5 )
-#define NBD_PRINT_DEBUG	_IO( 0xab, 6 )
-#define NBD_SET_SIZE_BLOCKS	_IO( 0xab, 7 )
-#define NBD_DISCONNECT  _IO( 0xab, 8 )
-#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
-#define NBD_SET_FLAGS   _IO( 0xab, 10)
-
-enum {
-	NBD_CMD_READ = 0,
-	NBD_CMD_WRITE = 1,
-	NBD_CMD_DISC = 2,
-	/* there is a gap here to match userspace */
-	NBD_CMD_TRIM = 4
-};
-
-/* values for flags field */
-#define NBD_FLAG_HAS_FLAGS    (1 << 0) /* nbd-server supports flags */
-#define NBD_FLAG_READ_ONLY    (1 << 1) /* device is read-only */
-/* there is a gap here to match userspace */
-#define NBD_FLAG_SEND_TRIM    (1 << 5) /* send trim/discard */
-
-#define nbd_cmd(req) ((req)->cmd[0])
-
-/* userspace doesn't need the nbd_device structure */
-#ifdef __KERNEL__
 
 #include <linux/wait.h>
 #include <linux/mutex.h>
+#include <uapi/linux/nbd.h>
 
 struct request;
 
@@ -76,32 +44,3 @@ struct nbd_device {
 };
 
 #endif
-
-/* These are sent over the network in the request/reply magic fields */
-
-#define NBD_REQUEST_MAGIC 0x25609513
-#define NBD_REPLY_MAGIC 0x67446698
-/* Do *not* use magics: 0x12560953 0x96744668. */
-
-/*
- * This is the packet used for communication between client and
- * server. All data are in network byte order.
- */
-struct nbd_request {
-	__be32 magic;
-	__be32 type;	/* == READ || == WRITE 	*/
-	char handle[8];
-	__be64 from;
-	__be32 len;
-} __attribute__((packed));
-
-/*
- * This is the reply packet that nbd-server sends back to the client after
- * it has completed an I/O request (or an error occurs).
- */
-struct nbd_reply {
-	__be32 magic;
-	__be32 error;		/* 0 = ok, else error	*/
-	char handle[8];		/* handle you got from request	*/
-};
-#endif
diff --git a/include/linux/ncp.h b/include/linux/ncp.h
deleted file mode 100644
index 99f0adeeb3f3..000000000000
--- a/include/linux/ncp.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- *  ncp.h
- *
- *  Copyright (C) 1995 by Volker Lendecke
- *  Modified for sparc by J.F. Chadima
- *  Modified for __constant_ntoh by Frank A. Vorstenbosch
- *
- */
-
-#ifndef _LINUX_NCP_H
-#define _LINUX_NCP_H
-
-#include <linux/types.h>
-
-#define NCP_PTYPE                (0x11)
-#define NCP_PORT                 (0x0451)
-
-#define NCP_ALLOC_SLOT_REQUEST   (0x1111)
-#define NCP_REQUEST              (0x2222)
-#define NCP_DEALLOC_SLOT_REQUEST (0x5555)
-
-struct ncp_request_header {
-	__u16 type;
-	__u8 sequence;
-	__u8 conn_low;
-	__u8 task;
-	__u8 conn_high;
-	__u8 function;
-	__u8 data[0];
-} __attribute__((packed));
-
-#define NCP_REPLY                (0x3333)
-#define NCP_WATCHDOG		 (0x3E3E)
-#define NCP_POSITIVE_ACK         (0x9999)
-
-struct ncp_reply_header {
-	__u16 type;
-	__u8 sequence;
-	__u8 conn_low;
-	__u8 task;
-	__u8 conn_high;
-	__u8 completion_code;
-	__u8 connection_state;
-	__u8 data[0];
-} __attribute__((packed));
-
-#define NCP_VOLNAME_LEN (16)
-#define NCP_NUMBER_OF_VOLUMES (256)
-struct ncp_volume_info {
-	__u32 total_blocks;
-	__u32 free_blocks;
-	__u32 purgeable_blocks;
-	__u32 not_yet_purgeable_blocks;
-	__u32 total_dir_entries;
-	__u32 available_dir_entries;
-	__u8 sectors_per_block;
-	char volume_name[NCP_VOLNAME_LEN + 1];
-};
-
-#define AR_READ      (cpu_to_le16(1))
-#define AR_WRITE     (cpu_to_le16(2))
-#define AR_EXCLUSIVE (cpu_to_le16(0x20))
-
-#define NCP_FILE_ID_LEN 6
-
-/* Defines for Name Spaces */
-#define NW_NS_DOS     0
-#define NW_NS_MAC     1
-#define NW_NS_NFS     2
-#define NW_NS_FTAM    3
-#define NW_NS_OS2     4
-
-/*  Defines for ReturnInformationMask */
-#define RIM_NAME	      (cpu_to_le32(1))
-#define RIM_SPACE_ALLOCATED   (cpu_to_le32(2))
-#define RIM_ATTRIBUTES	      (cpu_to_le32(4))
-#define RIM_DATA_SIZE	      (cpu_to_le32(8))
-#define RIM_TOTAL_SIZE	      (cpu_to_le32(0x10))
-#define RIM_EXT_ATTR_INFO     (cpu_to_le32(0x20))
-#define RIM_ARCHIVE	      (cpu_to_le32(0x40))
-#define RIM_MODIFY	      (cpu_to_le32(0x80))
-#define RIM_CREATION	      (cpu_to_le32(0x100))
-#define RIM_OWNING_NAMESPACE  (cpu_to_le32(0x200))
-#define RIM_DIRECTORY	      (cpu_to_le32(0x400))
-#define RIM_RIGHTS	      (cpu_to_le32(0x800))
-#define RIM_ALL 	      (cpu_to_le32(0xFFF))
-#define RIM_COMPRESSED_INFO   (cpu_to_le32(0x80000000))
-
-/* Defines for NSInfoBitMask */
-#define NSIBM_NFS_NAME		0x0001
-#define NSIBM_NFS_MODE		0x0002
-#define NSIBM_NFS_GID		0x0004
-#define NSIBM_NFS_NLINKS	0x0008
-#define NSIBM_NFS_RDEV		0x0010
-#define NSIBM_NFS_LINK		0x0020
-#define NSIBM_NFS_CREATED	0x0040
-#define NSIBM_NFS_UID		0x0080
-#define NSIBM_NFS_ACSFLAG	0x0100
-#define NSIBM_NFS_MYFLAG	0x0200
-
-/* open/create modes */
-#define OC_MODE_OPEN	  0x01
-#define OC_MODE_TRUNCATE  0x02
-#define OC_MODE_REPLACE   0x02
-#define OC_MODE_CREATE	  0x08
-
-/* open/create results */
-#define OC_ACTION_NONE	   0x00
-#define OC_ACTION_OPEN	   0x01
-#define OC_ACTION_CREATE   0x02
-#define OC_ACTION_TRUNCATE 0x04
-#define OC_ACTION_REPLACE  0x04
-
-/* access rights attributes */
-#ifndef AR_READ_ONLY
-#define AR_READ_ONLY	   0x0001
-#define AR_WRITE_ONLY	   0x0002
-#define AR_DENY_READ	   0x0004
-#define AR_DENY_WRITE	   0x0008
-#define AR_COMPATIBILITY   0x0010
-#define AR_WRITE_THROUGH   0x0040
-#define AR_OPEN_COMPRESSED 0x0100
-#endif
-
-struct nw_nfs_info {
-	__u32 mode;
-	__u32 rdev;
-};
-
-struct nw_info_struct {
-	__u32 spaceAlloc;
-	__le32 attributes;
-	__u16 flags;
-	__le32 dataStreamSize;
-	__le32 totalStreamSize;
-	__u16 numberOfStreams;
-	__le16 creationTime;
-	__le16 creationDate;
-	__u32 creatorID;
-	__le16 modifyTime;
-	__le16 modifyDate;
-	__u32 modifierID;
-	__le16 lastAccessDate;
-	__u16 archiveTime;
-	__u16 archiveDate;
-	__u32 archiverID;
-	__u16 inheritedRightsMask;
-	__le32 dirEntNum;
-	__le32 DosDirNum;
-	__u32 volNumber;
-	__u32 EADataSize;
-	__u32 EAKeyCount;
-	__u32 EAKeySize;
-	__u32 NSCreator;
-	__u8 nameLen;
-	__u8 entryName[256];
-	/* libncp may depend on there being nothing after entryName */
-#ifdef __KERNEL__
-	struct nw_nfs_info nfs;
-#endif
-} __attribute__((packed));
-
-/* modify mask - use with MODIFY_DOS_INFO structure */
-#define DM_ATTRIBUTES		  (cpu_to_le32(0x02))
-#define DM_CREATE_DATE		  (cpu_to_le32(0x04))
-#define DM_CREATE_TIME		  (cpu_to_le32(0x08))
-#define DM_CREATOR_ID		  (cpu_to_le32(0x10))
-#define DM_ARCHIVE_DATE 	  (cpu_to_le32(0x20))
-#define DM_ARCHIVE_TIME 	  (cpu_to_le32(0x40))
-#define DM_ARCHIVER_ID		  (cpu_to_le32(0x80))
-#define DM_MODIFY_DATE		  (cpu_to_le32(0x0100))
-#define DM_MODIFY_TIME		  (cpu_to_le32(0x0200))
-#define DM_MODIFIER_ID		  (cpu_to_le32(0x0400))
-#define DM_LAST_ACCESS_DATE	  (cpu_to_le32(0x0800))
-#define DM_INHERITED_RIGHTS_MASK  (cpu_to_le32(0x1000))
-#define DM_MAXIMUM_SPACE	  (cpu_to_le32(0x2000))
-
-struct nw_modify_dos_info {
-	__le32 attributes;
-	__le16 creationDate;
-	__le16 creationTime;
-	__u32 creatorID;
-	__le16 modifyDate;
-	__le16 modifyTime;
-	__u32 modifierID;
-	__u16 archiveDate;
-	__u16 archiveTime;
-	__u32 archiverID;
-	__le16 lastAccessDate;
-	__u16 inheritanceGrantMask;
-	__u16 inheritanceRevokeMask;
-	__u32 maximumSpace;
-} __attribute__((packed));
-
-struct nw_search_sequence {
-	__u8 volNumber;
-	__u32 dirBase;
-	__u32 sequence;
-} __attribute__((packed));
-
-#endif				/* _LINUX_NCP_H */
diff --git a/include/linux/ncp_fs.h b/include/linux/ncp_fs.h
deleted file mode 100644
index e13eefef0653..000000000000
--- a/include/linux/ncp_fs.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- *  ncp_fs.h
- *
- *  Copyright (C) 1995, 1996 by Volker Lendecke
- *
- */
-
-#ifndef _LINUX_NCP_FS_H
-#define _LINUX_NCP_FS_H
-
-#include <linux/fs.h>
-#include <linux/in.h>
-#include <linux/types.h>
-#include <linux/magic.h>
-
-#include <linux/ipx.h>
-#include <linux/ncp_no.h>
-
-/*
- * ioctl commands
- */
-
-struct ncp_ioctl_request {
-	unsigned int function;
-	unsigned int size;
-	char __user *data;
-};
-
-struct ncp_fs_info {
-	int version;
-	struct sockaddr_ipx addr;
-	__kernel_uid_t mounted_uid;
-	int connection;		/* Connection number the server assigned us */
-	int buffer_size;	/* The negotiated buffer size, to be
-				   used for read/write requests! */
-
-	int volume_number;
-	__le32 directory_id;
-};
-
-struct ncp_fs_info_v2 {
-	int version;
-	unsigned long mounted_uid;
-	unsigned int connection;
-	unsigned int buffer_size;
-
-	unsigned int volume_number;
-	__le32 directory_id;
-
-	__u32 dummy1;
-	__u32 dummy2;
-	__u32 dummy3;
-};
-
-struct ncp_sign_init
-{
-	char sign_root[8];
-	char sign_last[16];
-};
-
-struct ncp_lock_ioctl
-{
-#define NCP_LOCK_LOG	0
-#define NCP_LOCK_SH	1
-#define NCP_LOCK_EX	2
-#define NCP_LOCK_CLEAR	256
-	int		cmd;
-	int		origin;
-	unsigned int	offset;
-	unsigned int	length;
-#define NCP_LOCK_DEFAULT_TIMEOUT	18
-#define NCP_LOCK_MAX_TIMEOUT		180
-	int		timeout;
-};
-
-struct ncp_setroot_ioctl
-{
-	int		volNumber;
-	int		namespace;
-	__le32		dirEntNum;
-};
-
-struct ncp_objectname_ioctl
-{
-#define NCP_AUTH_NONE	0x00
-#define NCP_AUTH_BIND	0x31
-#define NCP_AUTH_NDS	0x32
-	int		auth_type;
-	size_t		object_name_len;
-	void __user *	object_name;	/* a userspace data, in most cases user name */
-};
-
-struct ncp_privatedata_ioctl
-{
-	size_t		len;
-	void __user *	data;		/* ~1000 for NDS */
-};
-
-/* NLS charsets by ioctl */
-#define NCP_IOCSNAME_LEN 20
-struct ncp_nls_ioctl
-{
-	unsigned char codepage[NCP_IOCSNAME_LEN+1];
-	unsigned char iocharset[NCP_IOCSNAME_LEN+1];
-};
-
-#define	NCP_IOC_NCPREQUEST		_IOR('n', 1, struct ncp_ioctl_request)
-#define	NCP_IOC_GETMOUNTUID		_IOW('n', 2, __kernel_old_uid_t)
-#define NCP_IOC_GETMOUNTUID2		_IOW('n', 2, unsigned long)
-
-#define NCP_IOC_CONN_LOGGED_IN          _IO('n', 3)
-
-#define NCP_GET_FS_INFO_VERSION    (1)
-#define NCP_IOC_GET_FS_INFO             _IOWR('n', 4, struct ncp_fs_info)
-#define NCP_GET_FS_INFO_VERSION_V2 (2)
-#define NCP_IOC_GET_FS_INFO_V2		_IOWR('n', 4, struct ncp_fs_info_v2)
-
-#define NCP_IOC_SIGN_INIT		_IOR('n', 5, struct ncp_sign_init)
-#define NCP_IOC_SIGN_WANTED		_IOR('n', 6, int)
-#define NCP_IOC_SET_SIGN_WANTED		_IOW('n', 6, int)
-
-#define NCP_IOC_LOCKUNLOCK		_IOR('n', 7, struct ncp_lock_ioctl)
-
-#define NCP_IOC_GETROOT			_IOW('n', 8, struct ncp_setroot_ioctl)
-#define NCP_IOC_SETROOT			_IOR('n', 8, struct ncp_setroot_ioctl)
-
-#define NCP_IOC_GETOBJECTNAME		_IOWR('n', 9, struct ncp_objectname_ioctl)
-#define NCP_IOC_SETOBJECTNAME		_IOR('n', 9, struct ncp_objectname_ioctl)
-#define NCP_IOC_GETPRIVATEDATA		_IOWR('n', 10, struct ncp_privatedata_ioctl)
-#define NCP_IOC_SETPRIVATEDATA		_IOR('n', 10, struct ncp_privatedata_ioctl)
-
-#define NCP_IOC_GETCHARSETS		_IOWR('n', 11, struct ncp_nls_ioctl)
-#define NCP_IOC_SETCHARSETS		_IOR('n', 11, struct ncp_nls_ioctl)
-
-#define NCP_IOC_GETDENTRYTTL		_IOW('n', 12, __u32)
-#define NCP_IOC_SETDENTRYTTL		_IOR('n', 12, __u32)
-
-/*
- * The packet size to allocate. One page should be enough.
- */
-#define NCP_PACKET_SIZE 4070
-
-#define NCP_MAXPATHLEN 255
-#define NCP_MAXNAMELEN 14
-
-#endif				/* _LINUX_NCP_FS_H */
diff --git a/include/linux/ncp_mount.h b/include/linux/ncp_mount.h
deleted file mode 100644
index dfcbea2d889f..000000000000
--- a/include/linux/ncp_mount.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  ncp_mount.h
- *
- *  Copyright (C) 1995, 1996 by Volker Lendecke
- *
- */
-
-#ifndef _LINUX_NCP_MOUNT_H
-#define _LINUX_NCP_MOUNT_H
-
-#include <linux/types.h>
-#include <linux/ncp.h>
-
-#define NCP_MOUNT_VERSION 3	/* Binary */
-
-/* Values for flags */
-#define NCP_MOUNT_SOFT		0x0001
-#define NCP_MOUNT_INTR		0x0002
-#define NCP_MOUNT_STRONG	0x0004	/* enable delete/rename of r/o files */
-#define NCP_MOUNT_NO_OS2	0x0008	/* do not use OS/2 (LONG) namespace */
-#define NCP_MOUNT_NO_NFS	0x0010	/* do not use NFS namespace */
-#define NCP_MOUNT_EXTRAS	0x0020
-#define NCP_MOUNT_SYMLINKS	0x0040	/* enable symlinks */
-#define NCP_MOUNT_NFS_EXTRAS	0x0080	/* Enable use of NFS NS meta-info */
-
-struct ncp_mount_data {
-	int version;
-	unsigned int ncp_fd;	/* The socket to the ncp port */
-	__kernel_uid_t mounted_uid;	/* Who may umount() this filesystem? */
-	__kernel_pid_t wdog_pid;		/* Who cares for our watchdog packets? */
-
-	unsigned char mounted_vol[NCP_VOLNAME_LEN + 1];
-	unsigned int time_out;	/* How long should I wait after
-				   sending a NCP request? */
-	unsigned int retry_count;	/* And how often should I retry? */
-	unsigned int flags;
-
-	__kernel_uid_t uid;
-	__kernel_gid_t gid;
-	__kernel_mode_t file_mode;
-	__kernel_mode_t dir_mode;
-};
-
-#define NCP_MOUNT_VERSION_V4	(4)	/* Binary or text */
-
-struct ncp_mount_data_v4 {
-	int version;
-	unsigned long flags;	/* NCP_MOUNT_* flags */
-	/* MIPS uses long __kernel_uid_t, but... */
-	/* we neever pass -1, so it is safe */
-	unsigned long mounted_uid;	/* Who may umount() this filesystem? */
-	/* MIPS uses long __kernel_pid_t */
-	long wdog_pid;		/* Who cares for our watchdog packets? */
-
-	unsigned int ncp_fd;	/* The socket to the ncp port */
-	unsigned int time_out;	/* How long should I wait after
-				   sending a NCP request? */
-	unsigned int retry_count;	/* And how often should I retry? */
-
-	/* MIPS uses long __kernel_uid_t... */
-	/* we never pass -1, so it is safe */
-	unsigned long uid;
-	unsigned long gid;
-	/* MIPS uses unsigned long __kernel_mode_t */
-	unsigned long file_mode;
-	unsigned long dir_mode;
-};
-
-#define NCP_MOUNT_VERSION_V5	(5)	/* Text only */
-
-#endif
diff --git a/include/linux/ncp_no.h b/include/linux/ncp_no.h
deleted file mode 100644
index cddaa48fb182..000000000000
--- a/include/linux/ncp_no.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _NCP_NO
-#define _NCP_NO
-
-/* these define the attribute byte as seen by NCP */
-#define aRONLY			(__cpu_to_le32(1))
-#define aHIDDEN			(__cpu_to_le32(2))
-#define aSYSTEM			(__cpu_to_le32(4))
-#define aEXECUTE		(__cpu_to_le32(8))
-#define aDIR			(__cpu_to_le32(0x10))
-#define aARCH			(__cpu_to_le32(0x20))
-#define aSHARED			(__cpu_to_le32(0x80))
-#define aDONTSUBALLOCATE	(__cpu_to_le32(1L<<11))
-#define aTRANSACTIONAL		(__cpu_to_le32(1L<<12))
-#define aPURGE			(__cpu_to_le32(1L<<16))
-#define aRENAMEINHIBIT		(__cpu_to_le32(1L<<17))
-#define aDELETEINHIBIT		(__cpu_to_le32(1L<<18))
-#define aDONTCOMPRESS		(__cpu_to_le32(1L<<27))
-
-#endif /* _NCP_NO */
diff --git a/include/linux/neighbour.h b/include/linux/neighbour.h
deleted file mode 100644
index 275e5d65dcb2..000000000000
--- a/include/linux/neighbour.h
+++ /dev/null
@@ -1,159 +0,0 @@
-#ifndef __LINUX_NEIGHBOUR_H
-#define __LINUX_NEIGHBOUR_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-
-struct ndmsg {
-	__u8		ndm_family;
-	__u8		ndm_pad1;
-	__u16		ndm_pad2;
-	__s32		ndm_ifindex;
-	__u16		ndm_state;
-	__u8		ndm_flags;
-	__u8		ndm_type;
-};
-
-enum {
-	NDA_UNSPEC,
-	NDA_DST,
-	NDA_LLADDR,
-	NDA_CACHEINFO,
-	NDA_PROBES,
-	__NDA_MAX
-};
-
-#define NDA_MAX (__NDA_MAX - 1)
-
-/*
- *	Neighbor Cache Entry Flags
- */
-
-#define NTF_USE		0x01
-#define NTF_PROXY	0x08	/* == ATF_PUBL */
-#define NTF_ROUTER	0x80
-
-#define NTF_SELF	0x02
-#define NTF_MASTER	0x04
-
-/*
- *	Neighbor Cache Entry States.
- */
-
-#define NUD_INCOMPLETE	0x01
-#define NUD_REACHABLE	0x02
-#define NUD_STALE	0x04
-#define NUD_DELAY	0x08
-#define NUD_PROBE	0x10
-#define NUD_FAILED	0x20
-
-/* Dummy states */
-#define NUD_NOARP	0x40
-#define NUD_PERMANENT	0x80
-#define NUD_NONE	0x00
-
-/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change
-   and make no address resolution or NUD.
-   NUD_PERMANENT is also cannot be deleted by garbage collectors.
- */
-
-struct nda_cacheinfo {
-	__u32		ndm_confirmed;
-	__u32		ndm_used;
-	__u32		ndm_updated;
-	__u32		ndm_refcnt;
-};
-
-/*****************************************************************
- *		Neighbour tables specific messages.
- *
- * To retrieve the neighbour tables send RTM_GETNEIGHTBL with the
- * NLM_F_DUMP flag set. Every neighbour table configuration is
- * spread over multiple messages to avoid running into message
- * size limits on systems with many interfaces. The first message
- * in the sequence transports all not device specific data such as
- * statistics, configuration, and the default parameter set.
- * This message is followed by 0..n messages carrying device
- * specific parameter sets.
- * Although the ordering should be sufficient, NDTA_NAME can be
- * used to identify sequences. The initial message can be identified
- * by checking for NDTA_CONFIG. The device specific messages do
- * not contain this TLV but have NDTPA_IFINDEX set to the
- * corresponding interface index.
- *
- * To change neighbour table attributes, send RTM_SETNEIGHTBL
- * with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3],
- * NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked
- * otherwise. Device specific parameter sets can be changed by
- * setting NDTPA_IFINDEX to the interface index of the corresponding
- * device.
- ****/
-
-struct ndt_stats {
-	__u64		ndts_allocs;
-	__u64		ndts_destroys;
-	__u64		ndts_hash_grows;
-	__u64		ndts_res_failed;
-	__u64		ndts_lookups;
-	__u64		ndts_hits;
-	__u64		ndts_rcv_probes_mcast;
-	__u64		ndts_rcv_probes_ucast;
-	__u64		ndts_periodic_gc_runs;
-	__u64		ndts_forced_gc_runs;
-};
-
-enum {
-	NDTPA_UNSPEC,
-	NDTPA_IFINDEX,			/* u32, unchangeable */
-	NDTPA_REFCNT,			/* u32, read-only */
-	NDTPA_REACHABLE_TIME,		/* u64, read-only, msecs */
-	NDTPA_BASE_REACHABLE_TIME,	/* u64, msecs */
-	NDTPA_RETRANS_TIME,		/* u64, msecs */
-	NDTPA_GC_STALETIME,		/* u64, msecs */
-	NDTPA_DELAY_PROBE_TIME,		/* u64, msecs */
-	NDTPA_QUEUE_LEN,		/* u32 */
-	NDTPA_APP_PROBES,		/* u32 */
-	NDTPA_UCAST_PROBES,		/* u32 */
-	NDTPA_MCAST_PROBES,		/* u32 */
-	NDTPA_ANYCAST_DELAY,		/* u64, msecs */
-	NDTPA_PROXY_DELAY,		/* u64, msecs */
-	NDTPA_PROXY_QLEN,		/* u32 */
-	NDTPA_LOCKTIME,			/* u64, msecs */
-	NDTPA_QUEUE_LENBYTES,		/* u32 */
-	__NDTPA_MAX
-};
-#define NDTPA_MAX (__NDTPA_MAX - 1)
-
-struct ndtmsg {
-	__u8		ndtm_family;
-	__u8		ndtm_pad1;
-	__u16		ndtm_pad2;
-};
-
-struct ndt_config {
-	__u16		ndtc_key_len;
-	__u16		ndtc_entry_size;
-	__u32		ndtc_entries;
-	__u32		ndtc_last_flush;	/* delta to now in msecs */
-	__u32		ndtc_last_rand;		/* delta to now in msecs */
-	__u32		ndtc_hash_rnd;
-	__u32		ndtc_hash_mask;
-	__u32		ndtc_hash_chain_gc;
-	__u32		ndtc_proxy_qlen;
-};
-
-enum {
-	NDTA_UNSPEC,
-	NDTA_NAME,			/* char *, unchangeable */
-	NDTA_THRESH1,			/* u32 */
-	NDTA_THRESH2,			/* u32 */
-	NDTA_THRESH3,			/* u32 */
-	NDTA_CONFIG,			/* struct ndt_config, read-only */
-	NDTA_PARMS,			/* nested TLV NDTPA_* */
-	NDTA_STATS,			/* struct ndt_stats, read-only */
-	NDTA_GC_INTERVAL,		/* u64, msecs */
-	__NDTA_MAX
-};
-#define NDTA_MAX (__NDTA_MAX - 1)
-
-#endif
diff --git a/include/linux/net.h b/include/linux/net.h
index 6ab31cabef7c..aa1673160a45 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -18,49 +18,13 @@
 #ifndef _LINUX_NET_H
 #define _LINUX_NET_H
 
-#include <linux/socket.h>
-#include <asm/socket.h>
-
-#define NPROTO		AF_MAX
-
-#define SYS_SOCKET	1		/* sys_socket(2)		*/
-#define SYS_BIND	2		/* sys_bind(2)			*/
-#define SYS_CONNECT	3		/* sys_connect(2)		*/
-#define SYS_LISTEN	4		/* sys_listen(2)		*/
-#define SYS_ACCEPT	5		/* sys_accept(2)		*/
-#define SYS_GETSOCKNAME	6		/* sys_getsockname(2)		*/
-#define SYS_GETPEERNAME	7		/* sys_getpeername(2)		*/
-#define SYS_SOCKETPAIR	8		/* sys_socketpair(2)		*/
-#define SYS_SEND	9		/* sys_send(2)			*/
-#define SYS_RECV	10		/* sys_recv(2)			*/
-#define SYS_SENDTO	11		/* sys_sendto(2)		*/
-#define SYS_RECVFROM	12		/* sys_recvfrom(2)		*/
-#define SYS_SHUTDOWN	13		/* sys_shutdown(2)		*/
-#define SYS_SETSOCKOPT	14		/* sys_setsockopt(2)		*/
-#define SYS_GETSOCKOPT	15		/* sys_getsockopt(2)		*/
-#define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
-#define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
-#define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
-#define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
-#define SYS_SENDMMSG	20		/* sys_sendmmsg(2)		*/
-
-typedef enum {
-	SS_FREE = 0,			/* not allocated		*/
-	SS_UNCONNECTED,			/* unconnected to any socket	*/
-	SS_CONNECTING,			/* in process of connecting	*/
-	SS_CONNECTED,			/* connected to socket		*/
-	SS_DISCONNECTING		/* in process of disconnecting	*/
-} socket_state;
-
-#define __SO_ACCEPTCON	(1 << 16)	/* performed a listen		*/
-
-#ifdef __KERNEL__
 #include <linux/stringify.h>
 #include <linux/random.h>
 #include <linux/wait.h>
 #include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
 #include <linux/kmemcheck.h>
 #include <linux/rcupdate.h>
+#include <uapi/linux/net.h>
 
 struct poll_table_struct;
 struct pipe_inode_info;
@@ -319,5 +283,4 @@ extern int kernel_sock_shutdown(struct socket *sock,
 #define MODULE_ALIAS_NET_PF_PROTO_NAME(pf, proto, name) \
 	MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto) \
 		     name)
-#endif /* __KERNEL__ */
 #endif	/* _LINUX_NET_H */
diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h
deleted file mode 100644
index 2a739462caeb..000000000000
--- a/include/linux/net_dropmon.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __NET_DROPMON_H
-#define __NET_DROPMON_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-
-struct net_dm_drop_point {
-	__u8 pc[8];
-	__u32 count;
-};
-
-#define is_drop_point_hw(x) do {\
-	int ____i, ____j;\
-	for (____i = 0; ____i < 8; i ____i++)\
-		____j |= x[____i];\
-	____j;\
-} while (0)
-
-#define NET_DM_CFG_VERSION  0
-#define NET_DM_CFG_ALERT_COUNT  1
-#define NET_DM_CFG_ALERT_DELAY 2
-#define NET_DM_CFG_MAX 3
-
-struct net_dm_config_entry {
-	__u32 type;
-	__u64 data __attribute__((aligned(8)));
-};
-
-struct net_dm_config_msg {
-	__u32 entries;
-	struct net_dm_config_entry options[0];
-};
-
-struct net_dm_alert_msg {
-	__u32 entries;
-	struct net_dm_drop_point points[0];
-};
-
-struct net_dm_user_msg {
-	union {
-		struct net_dm_config_msg user;
-		struct net_dm_alert_msg alert;
-	} u;
-};
-
-
-/* These are the netlink message types for this protocol */
-
-enum {
-	NET_DM_CMD_UNSPEC = 0,
-	NET_DM_CMD_ALERT,
-	NET_DM_CMD_CONFIG,
-	NET_DM_CMD_START,
-	NET_DM_CMD_STOP,
-	_NET_DM_CMD_MAX,
-};
-
-#define NET_DM_CMD_MAX (_NET_DM_CMD_MAX - 1)
-
-/*
- * Our group identifiers
- */
-#define NET_DM_GRP_ALERT 1
-#endif
diff --git a/include/linux/net_tstamp.h b/include/linux/net_tstamp.h
deleted file mode 100644
index ae5df122e42f..000000000000
--- a/include/linux/net_tstamp.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Userspace API for hardware time stamping of network packets
- *
- * Copyright (C) 2008,2009 Intel Corporation
- * Author: Patrick Ohly <patrick.ohly@intel.com>
- *
- */
-
-#ifndef _NET_TIMESTAMPING_H
-#define _NET_TIMESTAMPING_H
-
-#include <linux/socket.h>   /* for SO_TIMESTAMPING */
-
-/* SO_TIMESTAMPING gets an integer bit field comprised of these values */
-enum {
-	SOF_TIMESTAMPING_TX_HARDWARE = (1<<0),
-	SOF_TIMESTAMPING_TX_SOFTWARE = (1<<1),
-	SOF_TIMESTAMPING_RX_HARDWARE = (1<<2),
-	SOF_TIMESTAMPING_RX_SOFTWARE = (1<<3),
-	SOF_TIMESTAMPING_SOFTWARE = (1<<4),
-	SOF_TIMESTAMPING_SYS_HARDWARE = (1<<5),
-	SOF_TIMESTAMPING_RAW_HARDWARE = (1<<6),
-	SOF_TIMESTAMPING_MASK =
-	(SOF_TIMESTAMPING_RAW_HARDWARE - 1) |
-	SOF_TIMESTAMPING_RAW_HARDWARE
-};
-
-/**
- * struct hwtstamp_config - %SIOCSHWTSTAMP parameter
- *
- * @flags:	no flags defined right now, must be zero
- * @tx_type:	one of HWTSTAMP_TX_*
- * @rx_type:	one of one of HWTSTAMP_FILTER_*
- *
- * %SIOCSHWTSTAMP expects a &struct ifreq with a ifr_data pointer to
- * this structure. dev_ifsioc() in the kernel takes care of the
- * translation between 32 bit userspace and 64 bit kernel. The
- * structure is intentionally chosen so that it has the same layout on
- * 32 and 64 bit systems, don't break this!
- */
-struct hwtstamp_config {
-	int flags;
-	int tx_type;
-	int rx_filter;
-};
-
-/* possible values for hwtstamp_config->tx_type */
-enum hwtstamp_tx_types {
-	/*
-	 * No outgoing packet will need hardware time stamping;
-	 * should a packet arrive which asks for it, no hardware
-	 * time stamping will be done.
-	 */
-	HWTSTAMP_TX_OFF,
-
-	/*
-	 * Enables hardware time stamping for outgoing packets;
-	 * the sender of the packet decides which are to be
-	 * time stamped by setting %SOF_TIMESTAMPING_TX_SOFTWARE
-	 * before sending the packet.
-	 */
-	HWTSTAMP_TX_ON,
-
-	/*
-	 * Enables time stamping for outgoing packets just as
-	 * HWTSTAMP_TX_ON does, but also enables time stamp insertion
-	 * directly into Sync packets. In this case, transmitted Sync
-	 * packets will not received a time stamp via the socket error
-	 * queue.
-	 */
-	HWTSTAMP_TX_ONESTEP_SYNC,
-};
-
-/* possible values for hwtstamp_config->rx_filter */
-enum hwtstamp_rx_filters {
-	/* time stamp no incoming packet at all */
-	HWTSTAMP_FILTER_NONE,
-
-	/* time stamp any incoming packet */
-	HWTSTAMP_FILTER_ALL,
-
-	/* return value: time stamp all packets requested plus some others */
-	HWTSTAMP_FILTER_SOME,
-
-	/* PTP v1, UDP, any kind of event packet */
-	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
-	/* PTP v1, UDP, Sync packet */
-	HWTSTAMP_FILTER_PTP_V1_L4_SYNC,
-	/* PTP v1, UDP, Delay_req packet */
-	HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ,
-	/* PTP v2, UDP, any kind of event packet */
-	HWTSTAMP_FILTER_PTP_V2_L4_EVENT,
-	/* PTP v2, UDP, Sync packet */
-	HWTSTAMP_FILTER_PTP_V2_L4_SYNC,
-	/* PTP v2, UDP, Delay_req packet */
-	HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ,
-
-	/* 802.AS1, Ethernet, any kind of event packet */
-	HWTSTAMP_FILTER_PTP_V2_L2_EVENT,
-	/* 802.AS1, Ethernet, Sync packet */
-	HWTSTAMP_FILTER_PTP_V2_L2_SYNC,
-	/* 802.AS1, Ethernet, Delay_req packet */
-	HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ,
-
-	/* PTP v2/802.AS1, any layer, any kind of event packet */
-	HWTSTAMP_FILTER_PTP_V2_EVENT,
-	/* PTP v2/802.AS1, any layer, Sync packet */
-	HWTSTAMP_FILTER_PTP_V2_SYNC,
-	/* PTP v2/802.AS1, any layer, Delay_req packet */
-	HWTSTAMP_FILTER_PTP_V2_DELAY_REQ,
-};
-
-#endif /* _NET_TIMESTAMPING_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 561c8bc8976d..f8eda0276f03 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -25,12 +25,6 @@
 #ifndef _LINUX_NETDEVICE_H
 #define _LINUX_NETDEVICE_H
 
-#include <linux/if.h>
-#include <linux/if_ether.h>
-#include <linux/if_packet.h>
-#include <linux/if_link.h>
-
-#ifdef __KERNEL__
 #include <linux/pm_qos.h>
 #include <linux/timer.h>
 #include <linux/bug.h>
@@ -55,6 +49,7 @@
 
 #include <linux/netdev_features.h>
 #include <linux/neighbour.h>
+#include <uapi/linux/netdevice.h>
 
 struct netpoll_info;
 struct device;
@@ -133,14 +128,6 @@ static inline bool dev_xmit_complete(int rc)
 	return false;
 }
 
-#endif
-
-#define MAX_ADDR_LEN	32		/* Largest hardware address length */
-
-/* Initial net device group. All devices belong to group 0 by default. */
-#define INIT_NETDEV_GROUP	0
-
-#ifdef  __KERNEL__
 /*
  *	Compute the worst case header length according to the protocols
  *	used.
@@ -196,21 +183,6 @@ struct net_device_stats {
 	unsigned long	tx_compressed;
 };
 
-#endif  /*  __KERNEL__  */
-
-
-/* Media selection options. */
-enum {
-        IF_PORT_UNKNOWN = 0,
-        IF_PORT_10BASE2,
-        IF_PORT_10BASET,
-        IF_PORT_AUI,
-        IF_PORT_100BASET,
-        IF_PORT_100BASETX,
-        IF_PORT_100BASEFX
-};
-
-#ifdef __KERNEL__
 
 #include <linux/cache.h>
 #include <linux/skbuff.h>
@@ -2844,6 +2816,4 @@ do {								\
 })
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif	/* _LINUX_NETDEVICE_H */
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index 1dcf2a38e51f..ee142846f56a 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -1,7 +1,6 @@
 #ifndef __LINUX_NETFILTER_H
 #define __LINUX_NETFILTER_H
 
-#ifdef __KERNEL__
 #include <linux/init.h>
 #include <linux/skbuff.h>
 #include <linux/net.h>
@@ -10,75 +9,7 @@
 #include <linux/in6.h>
 #include <linux/wait.h>
 #include <linux/list.h>
-#endif
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/sysctl.h>
-
-/* Responses from hook functions. */
-#define NF_DROP 0
-#define NF_ACCEPT 1
-#define NF_STOLEN 2
-#define NF_QUEUE 3
-#define NF_REPEAT 4
-#define NF_STOP 5
-#define NF_MAX_VERDICT NF_STOP
-
-/* we overload the higher bits for encoding auxiliary data such as the queue
- * number or errno values. Not nice, but better than additional function
- * arguments. */
-#define NF_VERDICT_MASK 0x000000ff
-
-/* extra verdict flags have mask 0x0000ff00 */
-#define NF_VERDICT_FLAG_QUEUE_BYPASS	0x00008000
-
-/* queue number (NF_QUEUE) or errno (NF_DROP) */
-#define NF_VERDICT_QMASK 0xffff0000
-#define NF_VERDICT_QBITS 16
-
-#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
-
-#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-/* Generic cache responses from hook functions.
-   <= 0x2000 is used for protocol-flags. */
-#define NFC_UNKNOWN 0x4000
-#define NFC_ALTERED 0x8000
-
-/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
-#define NF_VERDICT_BITS 16
-#endif
-
-enum nf_inet_hooks {
-	NF_INET_PRE_ROUTING,
-	NF_INET_LOCAL_IN,
-	NF_INET_FORWARD,
-	NF_INET_LOCAL_OUT,
-	NF_INET_POST_ROUTING,
-	NF_INET_NUMHOOKS
-};
-
-enum {
-	NFPROTO_UNSPEC =  0,
-	NFPROTO_IPV4   =  2,
-	NFPROTO_ARP    =  3,
-	NFPROTO_BRIDGE =  7,
-	NFPROTO_IPV6   = 10,
-	NFPROTO_DECNET = 12,
-	NFPROTO_NUMPROTO,
-};
-
-union nf_inet_addr {
-	__u32		all[4];
-	__be32		ip;
-	__be32		ip6[4];
-	struct in_addr	in;
-	struct in6_addr	in6;
-};
-
-#ifdef __KERNEL__
+#include <uapi/linux/netfilter.h>
 #ifdef CONFIG_NETFILTER
 static inline int NF_DROP_GETERR(int verdict)
 {
@@ -411,5 +342,4 @@ extern struct nfq_ct_nat_hook __rcu *nfq_ct_nat_hook;
 static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {}
 #endif
 
-#endif /*__KERNEL__*/
 #endif /*__LINUX_NETFILTER_H*/
diff --git a/include/linux/netfilter_arp.h b/include/linux/netfilter_arp.h
deleted file mode 100644
index 92bc6ddcbf73..000000000000
--- a/include/linux/netfilter_arp.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __LINUX_ARP_NETFILTER_H
-#define __LINUX_ARP_NETFILTER_H
-
-/* ARP-specific defines for netfilter.
- * (C)2002 Rusty Russell IBM -- This code is GPL.
- */
-
-#include <linux/netfilter.h>
-
-/* There is no PF_ARP. */
-#define NF_ARP		0
-
-/* ARP Hooks */
-#define NF_ARP_IN	0
-#define NF_ARP_OUT	1
-#define NF_ARP_FORWARD	2
-#define NF_ARP_NUMHOOKS	3
-
-#endif /* __LINUX_ARP_NETFILTER_H */
diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h
index 31d2844e6572..dfb4d9e52bcb 100644
--- a/include/linux/netfilter_bridge.h
+++ b/include/linux/netfilter_bridge.h
@@ -1,30 +1,8 @@
 #ifndef __LINUX_BRIDGE_NETFILTER_H
 #define __LINUX_BRIDGE_NETFILTER_H
 
-/* bridge-specific defines for netfilter. 
- */
-
-#include <linux/netfilter.h>
-#include <linux/if_ether.h>
-#include <linux/if_vlan.h>
-#include <linux/if_pppox.h>
-
-/* Bridge Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_BR_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_BR_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_BR_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_BR_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_BR_POST_ROUTING	4
-/* Not really a hook, but used for the ebtables broute table */
-#define NF_BR_BROUTING		5
-#define NF_BR_NUMHOOKS		6
-
-#ifdef __KERNEL__
+#include <uapi/linux/netfilter_bridge.h>
+
 
 enum nf_br_hook_priorities {
 	NF_BR_PRI_FIRST = INT_MIN,
@@ -118,5 +96,4 @@ static inline void br_drop_fake_rtable(struct sk_buff *skb)
 #define br_drop_fake_rtable(skb)	        do { } while (0)
 #endif /* CONFIG_BRIDGE_NETFILTER */
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/netfilter_decnet.h b/include/linux/netfilter_decnet.h
deleted file mode 100644
index 0b09732aacd5..000000000000
--- a/include/linux/netfilter_decnet.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef __LINUX_DECNET_NETFILTER_H
-#define __LINUX_DECNET_NETFILTER_H
-
-/* DECnet-specific defines for netfilter. 
- * This file (C) Steve Whitehouse 1999 derived from the
- * ipv4 netfilter header file which is
- * (C)1998 Rusty Russell -- This code is GPL.
- */
-
-#include <linux/netfilter.h>
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_DN_SRC		0x0001
-/* Dest IP address. */
-#define NFC_DN_DST		0x0002
-/* Input device. */
-#define NFC_DN_IF_IN		0x0004
-/* Output device. */
-#define NFC_DN_IF_OUT		0x0008
-#endif /* ! __KERNEL__ */
-
-/* DECnet Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_DN_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_DN_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_DN_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_DN_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_DN_POST_ROUTING	4
-/* Input Hello Packets */
-#define NF_DN_HELLO		5
-/* Input Routing Packets */
-#define NF_DN_ROUTE		6
-#define NF_DN_NUMHOOKS		7
-
-enum nf_dn_hook_priorities {
-	NF_DN_PRI_FIRST = INT_MIN,
-	NF_DN_PRI_CONNTRACK = -200,
-	NF_DN_PRI_MANGLE = -150,
-	NF_DN_PRI_NAT_DST = -100,
-	NF_DN_PRI_FILTER = 0,
-	NF_DN_PRI_NAT_SRC = 100,
-	NF_DN_PRI_DNRTMSG = 200,
-	NF_DN_PRI_LAST = INT_MAX,
-};
-
-struct nf_dn_rtmsg {
-	int nfdn_ifindex;
-};
-
-#define NFDN_RTMSG(r) ((unsigned char *)(r) + NLMSG_ALIGN(sizeof(struct nf_dn_rtmsg)))
-
-#ifndef __KERNEL__
-/* backwards compatibility for userspace */
-#define DNRMG_L1_GROUP 0x01
-#define DNRMG_L2_GROUP 0x02
-#endif
-
-enum {
-	DNRNG_NLGRP_NONE,
-#define DNRNG_NLGRP_NONE	DNRNG_NLGRP_NONE
-	DNRNG_NLGRP_L1,
-#define DNRNG_NLGRP_L1		DNRNG_NLGRP_L1
-	DNRNG_NLGRP_L2,
-#define DNRNG_NLGRP_L2		DNRNG_NLGRP_L2
-	__DNRNG_NLGRP_MAX
-};
-#define DNRNG_NLGRP_MAX	(__DNRNG_NLGRP_MAX - 1)
-
-#endif /*__LINUX_DECNET_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h
index b962dfc695ae..dfaf116b3e81 100644
--- a/include/linux/netfilter_ipv4.h
+++ b/include/linux/netfilter_ipv4.h
@@ -1,86 +1,12 @@
-#ifndef __LINUX_IP_NETFILTER_H
-#define __LINUX_IP_NETFILTER_H
-
 /* IPv4-specific defines for netfilter. 
  * (C)1998 Rusty Russell -- This code is GPL.
  */
+#ifndef __LINUX_IP_NETFILTER_H
+#define __LINUX_IP_NETFILTER_H
 
-#include <linux/netfilter.h>
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP_SRC		0x0001
-/* Dest IP address. */
-#define NFC_IP_DST		0x0002
-/* Input device. */
-#define NFC_IP_IF_IN		0x0004
-/* Output device. */
-#define NFC_IP_IF_OUT		0x0008
-/* TOS. */
-#define NFC_IP_TOS		0x0010
-/* Protocol. */
-#define NFC_IP_PROTO		0x0020
-/* IP options. */
-#define NFC_IP_OPTIONS		0x0040
-/* Frag & flags. */
-#define NFC_IP_FRAG		0x0080
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP_TCPFLAGS		0x0100
-/* Source port. */
-#define NFC_IP_SRC_PT		0x0200
-/* Dest port. */
-#define NFC_IP_DST_PT		0x0400
-/* Something else about the proto */
-#define NFC_IP_PROTO_UNKNOWN	0x2000
-
-/* IP Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_IP_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_IP_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_IP_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_IP_POST_ROUTING	4
-#define NF_IP_NUMHOOKS		5
-#endif /* ! __KERNEL__ */
-
-enum nf_ip_hook_priorities {
-	NF_IP_PRI_FIRST = INT_MIN,
-	NF_IP_PRI_CONNTRACK_DEFRAG = -400,
-	NF_IP_PRI_RAW = -300,
-	NF_IP_PRI_SELINUX_FIRST = -225,
-	NF_IP_PRI_CONNTRACK = -200,
-	NF_IP_PRI_MANGLE = -150,
-	NF_IP_PRI_NAT_DST = -100,
-	NF_IP_PRI_FILTER = 0,
-	NF_IP_PRI_SECURITY = 50,
-	NF_IP_PRI_NAT_SRC = 100,
-	NF_IP_PRI_SELINUX_LAST = 225,
-	NF_IP_PRI_CONNTRACK_HELPER = 300,
-	NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
-	NF_IP_PRI_LAST = INT_MAX,
-};
-
-/* Arguments for setsockopt SOL_IP: */
-/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
-/* 2.2 firewalling (+ masq) went from 64 through 76 */
-/* 2.4 firewalling went 64 through 67. */
-#define SO_ORIGINAL_DST 80
+#include <uapi/linux/netfilter_ipv4.h>
 
-#ifdef __KERNEL__
 extern int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type);
 extern __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook,
 				   unsigned int dataoff, u_int8_t protocol);
-#endif /*__KERNEL__*/
-
 #endif /*__LINUX_IP_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
index 7c8a513ce7a3..98ffb54988b6 100644
--- a/include/linux/netfilter_ipv6.h
+++ b/include/linux/netfilter_ipv6.h
@@ -1,81 +1,14 @@
-#ifndef __LINUX_IP6_NETFILTER_H
-#define __LINUX_IP6_NETFILTER_H
-
 /* IPv6-specific defines for netfilter. 
  * (C)1998 Rusty Russell -- This code is GPL.
  * (C)1999 David Jeffery
  *   this header was blatantly ripped from netfilter_ipv4.h 
  *   it's amazing what adding a bunch of 6s can do =8^)
  */
+#ifndef __LINUX_IP6_NETFILTER_H
+#define __LINUX_IP6_NETFILTER_H
 
-#include <linux/netfilter.h>
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP6_SRC              0x0001
-/* Dest IP address. */
-#define NFC_IP6_DST              0x0002
-/* Input device. */
-#define NFC_IP6_IF_IN            0x0004
-/* Output device. */
-#define NFC_IP6_IF_OUT           0x0008
-/* TOS. */
-#define NFC_IP6_TOS              0x0010
-/* Protocol. */
-#define NFC_IP6_PROTO            0x0020
-/* IP options. */
-#define NFC_IP6_OPTIONS          0x0040
-/* Frag & flags. */
-#define NFC_IP6_FRAG             0x0080
-
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP6_TCPFLAGS         0x0100
-/* Source port. */
-#define NFC_IP6_SRC_PT           0x0200
-/* Dest port. */
-#define NFC_IP6_DST_PT           0x0400
-/* Something else about the proto */
-#define NFC_IP6_PROTO_UNKNOWN    0x2000
-
-/* IP6 Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP6_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_IP6_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_IP6_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_IP6_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_IP6_POST_ROUTING	4
-#define NF_IP6_NUMHOOKS		5
-#endif /* ! __KERNEL__ */
-
-
-enum nf_ip6_hook_priorities {
-	NF_IP6_PRI_FIRST = INT_MIN,
-	NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
-	NF_IP6_PRI_RAW = -300,
-	NF_IP6_PRI_SELINUX_FIRST = -225,
-	NF_IP6_PRI_CONNTRACK = -200,
-	NF_IP6_PRI_MANGLE = -150,
-	NF_IP6_PRI_NAT_DST = -100,
-	NF_IP6_PRI_FILTER = 0,
-	NF_IP6_PRI_SECURITY = 50,
-	NF_IP6_PRI_NAT_SRC = 100,
-	NF_IP6_PRI_SELINUX_LAST = 225,
-	NF_IP6_PRI_CONNTRACK_HELPER = 300,
-	NF_IP6_PRI_LAST = INT_MAX,
-};
+#include <uapi/linux/netfilter_ipv6.h>
 
-#ifdef  __KERNEL__
 
 #ifdef CONFIG_NETFILTER
 extern int ip6_route_me_harder(struct sk_buff *skb);
@@ -89,6 +22,4 @@ static inline int ipv6_netfilter_init(void) { return 0; }
 static inline void ipv6_netfilter_fini(void) { return; }
 #endif /* CONFIG_NETFILTER */
 
-#endif /* __KERNEL__ */
-
 #endif /*__LINUX_IP6_NETFILTER_H*/
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 6d3af05c107c..e0f746b7b95c 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -1,160 +1,12 @@
 #ifndef __LINUX_NETLINK_H
 #define __LINUX_NETLINK_H
 
-#include <linux/socket.h> /* for __kernel_sa_family_t */
-#include <linux/types.h>
-
-#define NETLINK_ROUTE		0	/* Routing/device hook				*/
-#define NETLINK_UNUSED		1	/* Unused number				*/
-#define NETLINK_USERSOCK	2	/* Reserved for user mode socket protocols 	*/
-#define NETLINK_FIREWALL	3	/* Unused number, formerly ip_queue		*/
-#define NETLINK_SOCK_DIAG	4	/* socket monitoring				*/
-#define NETLINK_NFLOG		5	/* netfilter/iptables ULOG */
-#define NETLINK_XFRM		6	/* ipsec */
-#define NETLINK_SELINUX		7	/* SELinux event notifications */
-#define NETLINK_ISCSI		8	/* Open-iSCSI */
-#define NETLINK_AUDIT		9	/* auditing */
-#define NETLINK_FIB_LOOKUP	10	
-#define NETLINK_CONNECTOR	11
-#define NETLINK_NETFILTER	12	/* netfilter subsystem */
-#define NETLINK_IP6_FW		13
-#define NETLINK_DNRTMSG		14	/* DECnet routing messages */
-#define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
-#define NETLINK_GENERIC		16
-/* leave room for NETLINK_DM (DM Events) */
-#define NETLINK_SCSITRANSPORT	18	/* SCSI Transports */
-#define NETLINK_ECRYPTFS	19
-#define NETLINK_RDMA		20
-#define NETLINK_CRYPTO		21	/* Crypto layer */
-
-#define NETLINK_INET_DIAG	NETLINK_SOCK_DIAG
-
-#define MAX_LINKS 32		
-
-struct sockaddr_nl {
-	__kernel_sa_family_t	nl_family;	/* AF_NETLINK	*/
-	unsigned short	nl_pad;		/* zero		*/
-	__u32		nl_pid;		/* port ID	*/
-       	__u32		nl_groups;	/* multicast groups mask */
-};
-
-struct nlmsghdr {
-	__u32		nlmsg_len;	/* Length of message including header */
-	__u16		nlmsg_type;	/* Message content */
-	__u16		nlmsg_flags;	/* Additional flags */
-	__u32		nlmsg_seq;	/* Sequence number */
-	__u32		nlmsg_pid;	/* Sending process port ID */
-};
-
-/* Flags values */
-
-#define NLM_F_REQUEST		1	/* It is request message. 	*/
-#define NLM_F_MULTI		2	/* Multipart message, terminated by NLMSG_DONE */
-#define NLM_F_ACK		4	/* Reply with ack, with zero or error code */
-#define NLM_F_ECHO		8	/* Echo this request 		*/
-#define NLM_F_DUMP_INTR		16	/* Dump was inconsistent due to sequence change */
-
-/* Modifiers to GET request */
-#define NLM_F_ROOT	0x100	/* specify tree	root	*/
-#define NLM_F_MATCH	0x200	/* return all matching	*/
-#define NLM_F_ATOMIC	0x400	/* atomic GET		*/
-#define NLM_F_DUMP	(NLM_F_ROOT|NLM_F_MATCH)
-
-/* Modifiers to NEW request */
-#define NLM_F_REPLACE	0x100	/* Override existing		*/
-#define NLM_F_EXCL	0x200	/* Do not touch, if it exists	*/
-#define NLM_F_CREATE	0x400	/* Create, if it does not exist	*/
-#define NLM_F_APPEND	0x800	/* Add to end of list		*/
-
-/*
-   4.4BSD ADD		NLM_F_CREATE|NLM_F_EXCL
-   4.4BSD CHANGE	NLM_F_REPLACE
-
-   True CHANGE		NLM_F_CREATE|NLM_F_REPLACE
-   Append		NLM_F_CREATE
-   Check		NLM_F_EXCL
- */
-
-#define NLMSG_ALIGNTO	4U
-#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
-#define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
-#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
-#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
-#define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
-#define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
-				  (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
-#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
-			   (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
-			   (nlh)->nlmsg_len <= (len))
-#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
-
-#define NLMSG_NOOP		0x1	/* Nothing.		*/
-#define NLMSG_ERROR		0x2	/* Error		*/
-#define NLMSG_DONE		0x3	/* End of a dump	*/
-#define NLMSG_OVERRUN		0x4	/* Data lost		*/
-
-#define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */
-
-struct nlmsgerr {
-	int		error;
-	struct nlmsghdr msg;
-};
-
-#define NETLINK_ADD_MEMBERSHIP	1
-#define NETLINK_DROP_MEMBERSHIP	2
-#define NETLINK_PKTINFO		3
-#define NETLINK_BROADCAST_ERROR	4
-#define NETLINK_NO_ENOBUFS	5
-
-struct nl_pktinfo {
-	__u32	group;
-};
-
-#define NET_MAJOR 36		/* Major 36 is reserved for networking 						*/
-
-enum {
-	NETLINK_UNCONNECTED = 0,
-	NETLINK_CONNECTED,
-};
-
-/*
- *  <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- * |        Header       | Pad |     Payload       | Pad |
- * |   (struct nlattr)   | ing |                   | ing |
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- *  <-------------- nlattr->nla_len -------------->
- */
-
-struct nlattr {
-	__u16           nla_len;
-	__u16           nla_type;
-};
-
-/*
- * nla_type (16 bits)
- * +---+---+-------------------------------+
- * | N | O | Attribute Type                |
- * +---+---+-------------------------------+
- * N := Carries nested attributes
- * O := Payload stored in network byte order
- *
- * Note: The N and O flag are mutually exclusive.
- */
-#define NLA_F_NESTED		(1 << 15)
-#define NLA_F_NET_BYTEORDER	(1 << 14)
-#define NLA_TYPE_MASK		~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
-
-#define NLA_ALIGNTO		4
-#define NLA_ALIGN(len)		(((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
-#define NLA_HDRLEN		((int) NLA_ALIGN(sizeof(struct nlattr)))
-
-#ifdef __KERNEL__
 
 #include <linux/capability.h>
 #include <linux/skbuff.h>
 #include <linux/export.h>
 #include <net/scm.h>
+#include <uapi/linux/netlink.h>
 
 struct net;
 
@@ -283,6 +135,4 @@ static inline int netlink_dump_start(struct sock *ssk, struct sk_buff *skb,
 	return __netlink_dump_start(ssk, skb, nlh, control);
 }
 
-#endif /* __KERNEL__ */
-
 #endif	/* __LINUX_NETLINK_H */
diff --git a/include/linux/netrom.h b/include/linux/netrom.h
deleted file mode 100644
index af7313cc9cb6..000000000000
--- a/include/linux/netrom.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * These are the public elements of the Linux kernel NET/ROM implementation.
- * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
- * definition of the ax25_address structure.
- */
-
-#ifndef	NETROM_KERNEL_H
-#define	NETROM_KERNEL_H
-
-#include <linux/ax25.h>
-
-#define NETROM_MTU	236
-
-#define NETROM_T1	1
-#define NETROM_T2	2
-#define NETROM_N2	3
-#define	NETROM_T4	6
-#define	NETROM_IDLE	7
-
-#define	SIOCNRDECOBS		(SIOCPROTOPRIVATE+2)
-
-struct nr_route_struct {
-#define	NETROM_NEIGH	0
-#define	NETROM_NODE	1
-	int		type;
-	ax25_address	callsign;
-	char		device[16];
-	unsigned int	quality;
-	char		mnemonic[7];
-	ax25_address	neighbour;
-	unsigned int	obs_count;
-	unsigned int	ndigis;
-	ax25_address	digipeaters[AX25_MAX_DIGIS];
-};
-
-#endif
diff --git a/include/linux/nfc.h b/include/linux/nfc.h
deleted file mode 100644
index d908d17da56d..000000000000
--- a/include/linux/nfc.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * Copyright (C) 2011 Instituto Nokia de Tecnologia
- *
- * Authors:
- *    Lauro Ramos Venancio <lauro.venancio@openbossa.org>
- *    Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __LINUX_NFC_H
-#define __LINUX_NFC_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-#define NFC_GENL_NAME "nfc"
-#define NFC_GENL_VERSION 1
-
-#define NFC_GENL_MCAST_EVENT_NAME "events"
-
-/**
- * enum nfc_commands - supported nfc commands
- *
- * @NFC_CMD_UNSPEC: unspecified command
- *
- * @NFC_CMD_GET_DEVICE: request information about a device (requires
- *	%NFC_ATTR_DEVICE_INDEX) or dump request to get a list of all nfc devices
- * @NFC_CMD_DEV_UP: turn on the nfc device
- *	(requires %NFC_ATTR_DEVICE_INDEX)
- * @NFC_CMD_DEV_DOWN: turn off the nfc device
- *	(requires %NFC_ATTR_DEVICE_INDEX)
- * @NFC_CMD_START_POLL: start polling for targets using the given protocols
- *	(requires %NFC_ATTR_DEVICE_INDEX and %NFC_ATTR_PROTOCOLS)
- * @NFC_CMD_STOP_POLL: stop polling for targets (requires
- *	%NFC_ATTR_DEVICE_INDEX)
- * @NFC_CMD_GET_TARGET: dump all targets found by the previous poll (requires
- *	%NFC_ATTR_DEVICE_INDEX)
- * @NFC_EVENT_TARGETS_FOUND: event emitted when a new target is found
- *	(it sends %NFC_ATTR_DEVICE_INDEX)
- * @NFC_EVENT_DEVICE_ADDED: event emitted when a new device is registred
- *	(it sends %NFC_ATTR_DEVICE_NAME, %NFC_ATTR_DEVICE_INDEX and
- *	%NFC_ATTR_PROTOCOLS)
- * @NFC_EVENT_DEVICE_REMOVED: event emitted when a device is removed
- *	(it sends %NFC_ATTR_DEVICE_INDEX)
- * @NFC_EVENT_TM_ACTIVATED: event emitted when the adapter is activated in
- *      target mode.
- * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated
- *      from target mode.
- */
-enum nfc_commands {
-	NFC_CMD_UNSPEC,
-	NFC_CMD_GET_DEVICE,
-	NFC_CMD_DEV_UP,
-	NFC_CMD_DEV_DOWN,
-	NFC_CMD_DEP_LINK_UP,
-	NFC_CMD_DEP_LINK_DOWN,
-	NFC_CMD_START_POLL,
-	NFC_CMD_STOP_POLL,
-	NFC_CMD_GET_TARGET,
-	NFC_EVENT_TARGETS_FOUND,
-	NFC_EVENT_DEVICE_ADDED,
-	NFC_EVENT_DEVICE_REMOVED,
-	NFC_EVENT_TARGET_LOST,
-	NFC_EVENT_TM_ACTIVATED,
-	NFC_EVENT_TM_DEACTIVATED,
-/* private: internal use only */
-	__NFC_CMD_AFTER_LAST
-};
-#define NFC_CMD_MAX (__NFC_CMD_AFTER_LAST - 1)
-
-/**
- * enum nfc_attrs - supported nfc attributes
- *
- * @NFC_ATTR_UNSPEC: unspecified attribute
- *
- * @NFC_ATTR_DEVICE_INDEX: index of nfc device
- * @NFC_ATTR_DEVICE_NAME: device name, max 8 chars
- * @NFC_ATTR_PROTOCOLS: nfc protocols - bitwise or-ed combination from
- *	NFC_PROTO_*_MASK constants
- * @NFC_ATTR_TARGET_INDEX: index of the nfc target
- * @NFC_ATTR_TARGET_SENS_RES: NFC-A targets extra information such as NFCID
- * @NFC_ATTR_TARGET_SEL_RES: NFC-A targets extra information (useful if the
- *	target is not NFC-Forum compliant)
- * @NFC_ATTR_TARGET_NFCID1: NFC-A targets identifier, max 10 bytes
- * @NFC_ATTR_TARGET_SENSB_RES: NFC-B targets extra information, max 12 bytes
- * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes
- * @NFC_ATTR_COMM_MODE: Passive or active mode
- * @NFC_ATTR_RF_MODE: Initiator or target
- * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for
- * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for
- */
-enum nfc_attrs {
-	NFC_ATTR_UNSPEC,
-	NFC_ATTR_DEVICE_INDEX,
-	NFC_ATTR_DEVICE_NAME,
-	NFC_ATTR_PROTOCOLS,
-	NFC_ATTR_TARGET_INDEX,
-	NFC_ATTR_TARGET_SENS_RES,
-	NFC_ATTR_TARGET_SEL_RES,
-	NFC_ATTR_TARGET_NFCID1,
-	NFC_ATTR_TARGET_SENSB_RES,
-	NFC_ATTR_TARGET_SENSF_RES,
-	NFC_ATTR_COMM_MODE,
-	NFC_ATTR_RF_MODE,
-	NFC_ATTR_DEVICE_POWERED,
-	NFC_ATTR_IM_PROTOCOLS,
-	NFC_ATTR_TM_PROTOCOLS,
-/* private: internal use only */
-	__NFC_ATTR_AFTER_LAST
-};
-#define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1)
-
-#define NFC_DEVICE_NAME_MAXSIZE 8
-#define NFC_NFCID1_MAXSIZE 10
-#define NFC_SENSB_RES_MAXSIZE 12
-#define NFC_SENSF_RES_MAXSIZE 18
-#define NFC_GB_MAXSIZE        48
-
-/* NFC protocols */
-#define NFC_PROTO_JEWEL		1
-#define NFC_PROTO_MIFARE	2
-#define NFC_PROTO_FELICA	3
-#define NFC_PROTO_ISO14443	4
-#define NFC_PROTO_NFC_DEP	5
-#define NFC_PROTO_ISO14443_B	6
-
-#define NFC_PROTO_MAX		7
-
-/* NFC communication modes */
-#define NFC_COMM_ACTIVE  0
-#define NFC_COMM_PASSIVE 1
-
-/* NFC RF modes */
-#define NFC_RF_INITIATOR 0
-#define NFC_RF_TARGET    1
-#define NFC_RF_NONE      2
-
-/* NFC protocols masks used in bitsets */
-#define NFC_PROTO_JEWEL_MASK      (1 << NFC_PROTO_JEWEL)
-#define NFC_PROTO_MIFARE_MASK     (1 << NFC_PROTO_MIFARE)
-#define NFC_PROTO_FELICA_MASK	  (1 << NFC_PROTO_FELICA)
-#define NFC_PROTO_ISO14443_MASK	  (1 << NFC_PROTO_ISO14443)
-#define NFC_PROTO_NFC_DEP_MASK	  (1 << NFC_PROTO_NFC_DEP)
-#define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B)
-
-struct sockaddr_nfc {
-	sa_family_t sa_family;
-	__u32 dev_idx;
-	__u32 target_idx;
-	__u32 nfc_protocol;
-};
-
-#define NFC_LLCP_MAX_SERVICE_NAME 63
-struct sockaddr_nfc_llcp {
-	sa_family_t sa_family;
-	__u32 dev_idx;
-	__u32 target_idx;
-	__u32 nfc_protocol;
-	__u8 dsap; /* Destination SAP, if known */
-	__u8 ssap; /* Source SAP to be bound to */
-	char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */;
-	size_t service_name_len;
-};
-
-/* NFC socket protocols */
-#define NFC_SOCKPROTO_RAW	0
-#define NFC_SOCKPROTO_LLCP	1
-#define NFC_SOCKPROTO_MAX	2
-
-#define NFC_HEADER_SIZE 1
-
-/**
- * Pseudo-header info for raw socket packets
- * First byte is the adapter index
- * Second byte contains flags
- *  - 0x01 - Direction (0=RX, 1=TX)
- *  - 0x02-0x80 - Reserved
- **/
-#define NFC_LLCP_RAW_HEADER_SIZE	2
-#define NFC_LLCP_DIRECTION_RX		0x00
-#define NFC_LLCP_DIRECTION_TX		0x01
-
-#endif /*__LINUX_NFC_H */
diff --git a/include/linux/nfs.h b/include/linux/nfs.h
index 6d1fb63f5922..3e794c12e90a 100644
--- a/include/linux/nfs.h
+++ b/include/linux/nfs.h
@@ -7,130 +7,9 @@
 #ifndef _LINUX_NFS_H
 #define _LINUX_NFS_H
 
-#define NFS_PROGRAM	100003
-#define NFS_PORT	2049
-#define NFS_MAXDATA	8192
-#define NFS_MAXPATHLEN	1024
-#define NFS_MAXNAMLEN	255
-#define NFS_MAXGROUPS	16
-#define NFS_FHSIZE	32
-#define NFS_COOKIESIZE	4
-#define NFS_FIFO_DEV	(-1)
-#define NFSMODE_FMT	0170000
-#define NFSMODE_DIR	0040000
-#define NFSMODE_CHR	0020000
-#define NFSMODE_BLK	0060000
-#define NFSMODE_REG	0100000
-#define NFSMODE_LNK	0120000
-#define NFSMODE_SOCK	0140000
-#define NFSMODE_FIFO	0010000
-
-#define NFS_MNT_PROGRAM		100005
-#define NFS_MNT_VERSION		1
-#define NFS_MNT3_VERSION	3
-
-#define NFS_PIPE_DIRNAME "nfs"
-
-/*
- * NFS stats. The good thing with these values is that NFSv3 errors are
- * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
- * no-one uses anyway), so we can happily mix code as long as we make sure
- * no NFSv3 errors are returned to NFSv2 clients.
- * Error codes that have a `--' in the v2 column are not part of the
- * standard, but seem to be widely used nevertheless.
- */
- enum nfs_stat {
-	NFS_OK = 0,			/* v2 v3 v4 */
-	NFSERR_PERM = 1,		/* v2 v3 v4 */
-	NFSERR_NOENT = 2,		/* v2 v3 v4 */
-	NFSERR_IO = 5,			/* v2 v3 v4 */
-	NFSERR_NXIO = 6,		/* v2 v3 v4 */
-	NFSERR_EAGAIN = 11,		/* v2 v3 */
-	NFSERR_ACCES = 13,		/* v2 v3 v4 */
-	NFSERR_EXIST = 17,		/* v2 v3 v4 */
-	NFSERR_XDEV = 18,		/*    v3 v4 */
-	NFSERR_NODEV = 19,		/* v2 v3 v4 */
-	NFSERR_NOTDIR = 20,		/* v2 v3 v4 */
-	NFSERR_ISDIR = 21,		/* v2 v3 v4 */
-	NFSERR_INVAL = 22,		/* v2 v3 v4 */
-	NFSERR_FBIG = 27,		/* v2 v3 v4 */
-	NFSERR_NOSPC = 28,		/* v2 v3 v4 */
-	NFSERR_ROFS = 30,		/* v2 v3 v4 */
-	NFSERR_MLINK = 31,		/*    v3 v4 */
-	NFSERR_OPNOTSUPP = 45,		/* v2 v3 */
-	NFSERR_NAMETOOLONG = 63,	/* v2 v3 v4 */
-	NFSERR_NOTEMPTY = 66,		/* v2 v3 v4 */
-	NFSERR_DQUOT = 69,		/* v2 v3 v4 */
-	NFSERR_STALE = 70,		/* v2 v3 v4 */
-	NFSERR_REMOTE = 71,		/* v2 v3 */
-	NFSERR_WFLUSH = 99,		/* v2    */
-	NFSERR_BADHANDLE = 10001,	/*    v3 v4 */
-	NFSERR_NOT_SYNC = 10002,	/*    v3 */
-	NFSERR_BAD_COOKIE = 10003,	/*    v3 v4 */
-	NFSERR_NOTSUPP = 10004,		/*    v3 v4 */
-	NFSERR_TOOSMALL = 10005,	/*    v3 v4 */
-	NFSERR_SERVERFAULT = 10006,	/*    v3 v4 */
-	NFSERR_BADTYPE = 10007,		/*    v3 v4 */
-	NFSERR_JUKEBOX = 10008,		/*    v3 v4 */
-	NFSERR_SAME = 10009,		/*       v4 */
-	NFSERR_DENIED = 10010,		/*       v4 */
-	NFSERR_EXPIRED = 10011,		/*       v4 */
-	NFSERR_LOCKED = 10012,		/*       v4 */
-	NFSERR_GRACE = 10013,		/*       v4 */
-	NFSERR_FHEXPIRED = 10014,	/*       v4 */
-	NFSERR_SHARE_DENIED = 10015,	/*       v4 */
-	NFSERR_WRONGSEC = 10016,	/*       v4 */
-	NFSERR_CLID_INUSE = 10017,	/*       v4 */
-	NFSERR_RESOURCE = 10018,	/*       v4 */
-	NFSERR_MOVED = 10019,		/*       v4 */
-	NFSERR_NOFILEHANDLE = 10020,	/*       v4 */
-	NFSERR_MINOR_VERS_MISMATCH = 10021,   /* v4 */
-	NFSERR_STALE_CLIENTID = 10022,	/*       v4 */
-	NFSERR_STALE_STATEID = 10023,   /*       v4 */
-	NFSERR_OLD_STATEID = 10024,     /*       v4 */
-	NFSERR_BAD_STATEID = 10025,     /*       v4 */  
-	NFSERR_BAD_SEQID = 10026,	/*       v4 */
-	NFSERR_NOT_SAME = 10027,	/*       v4 */
-	NFSERR_LOCK_RANGE = 10028,	/*       v4 */
-	NFSERR_SYMLINK = 10029,		/*       v4 */
-	NFSERR_RESTOREFH = 10030,	/*       v4 */
-	NFSERR_LEASE_MOVED = 10031,	/*       v4 */
-	NFSERR_ATTRNOTSUPP = 10032,	/*       v4 */
-	NFSERR_NO_GRACE = 10033,	/*       v4 */
-	NFSERR_RECLAIM_BAD = 10034,	/*       v4 */
-	NFSERR_RECLAIM_CONFLICT = 10035,/*       v4 */
-	NFSERR_BAD_XDR = 10036,		/*       v4 */
-	NFSERR_LOCKS_HELD = 10037,	/*       v4 */
-	NFSERR_OPENMODE = 10038,       /*       v4 */
-	NFSERR_BADOWNER = 10039,       /*       v4 */
-	NFSERR_BADCHAR = 10040,        /*       v4 */
-	NFSERR_BADNAME = 10041,        /*       v4 */
-	NFSERR_BAD_RANGE = 10042,      /*       v4 */
-	NFSERR_LOCK_NOTSUPP = 10043,   /*       v4 */
-	NFSERR_OP_ILLEGAL = 10044,     /*       v4 */
-	NFSERR_DEADLOCK = 10045,       /*       v4 */
-	NFSERR_FILE_OPEN = 10046,      /*       v4 */
-	NFSERR_ADMIN_REVOKED = 10047,  /*       v4 */
-	NFSERR_CB_PATH_DOWN = 10048,   /*       v4 */
-};
-
-/* NFSv2 file types - beware, these are not the same in NFSv3 */
-
-enum nfs_ftype {
-	NFNON = 0,
-	NFREG = 1,
-	NFDIR = 2,
-	NFBLK = 3,
-	NFCHR = 4,
-	NFLNK = 5,
-	NFSOCK = 6,
-	NFBAD = 7,
-	NFFIFO = 8
-};
-
-#ifdef __KERNEL__
 #include <linux/sunrpc/msg_prot.h>
 #include <linux/string.h>
+#include <uapi/linux/nfs.h>
 
 /*
  * This is the kernel NFS client file handle representation
@@ -169,5 +48,4 @@ enum nfs3_stable_how {
 	NFS_DATA_SYNC = 1,
 	NFS_FILE_SYNC = 2
 };
-#endif /* __KERNEL__ */
 #endif /* _LINUX_NFS_H */
diff --git a/include/linux/nfs2.h b/include/linux/nfs2.h
deleted file mode 100644
index fde24b30cc9e..000000000000
--- a/include/linux/nfs2.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * NFS protocol definitions
- *
- * This file contains constants for Version 2 of the protocol.
- */
-#ifndef _LINUX_NFS2_H
-#define _LINUX_NFS2_H
-
-#define NFS2_PORT	2049
-#define NFS2_MAXDATA	8192
-#define NFS2_MAXPATHLEN	1024
-#define NFS2_MAXNAMLEN	255
-#define NFS2_MAXGROUPS	16
-#define NFS2_FHSIZE	32
-#define NFS2_COOKIESIZE	4
-#define NFS2_FIFO_DEV	(-1)
-#define NFS2MODE_FMT	0170000
-#define NFS2MODE_DIR	0040000
-#define NFS2MODE_CHR	0020000
-#define NFS2MODE_BLK	0060000
-#define NFS2MODE_REG	0100000
-#define NFS2MODE_LNK	0120000
-#define NFS2MODE_SOCK	0140000
-#define NFS2MODE_FIFO	0010000
-
-
-/* NFSv2 file types - beware, these are not the same in NFSv3 */
-enum nfs2_ftype {
-	NF2NON = 0,
-	NF2REG = 1,
-	NF2DIR = 2,
-	NF2BLK = 3,
-	NF2CHR = 4,
-	NF2LNK = 5,
-	NF2SOCK = 6,
-	NF2BAD = 7,
-	NF2FIFO = 8
-};
-
-struct nfs2_fh {
-	char			data[NFS2_FHSIZE];
-};
-
-/*
- * Procedure numbers for NFSv2
- */
-#define NFS2_VERSION		2
-#define NFSPROC_NULL		0
-#define NFSPROC_GETATTR		1
-#define NFSPROC_SETATTR		2
-#define NFSPROC_ROOT		3
-#define NFSPROC_LOOKUP		4
-#define NFSPROC_READLINK	5
-#define NFSPROC_READ		6
-#define NFSPROC_WRITECACHE	7
-#define NFSPROC_WRITE		8
-#define NFSPROC_CREATE		9
-#define NFSPROC_REMOVE		10
-#define NFSPROC_RENAME		11
-#define NFSPROC_LINK		12
-#define NFSPROC_SYMLINK		13
-#define NFSPROC_MKDIR		14
-#define NFSPROC_RMDIR		15
-#define NFSPROC_READDIR		16
-#define NFSPROC_STATFS		17
-
-#endif /* _LINUX_NFS2_H */
diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h
index 6ccfe3b641e1..a778ad8e3afd 100644
--- a/include/linux/nfs3.h
+++ b/include/linux/nfs3.h
@@ -4,100 +4,10 @@
 #ifndef _LINUX_NFS3_H
 #define _LINUX_NFS3_H
 
-#define NFS3_PORT		2049
-#define NFS3_MAXDATA		32768
-#define NFS3_MAXPATHLEN		PATH_MAX
-#define NFS3_MAXNAMLEN		NAME_MAX
-#define NFS3_MAXGROUPS		16
-#define NFS3_FHSIZE		64
-#define NFS3_COOKIESIZE		4
-#define NFS3_CREATEVERFSIZE	8
-#define NFS3_COOKIEVERFSIZE	8
-#define NFS3_WRITEVERFSIZE	8
-#define NFS3_FIFO_DEV		(-1)
-#define NFS3MODE_FMT		0170000
-#define NFS3MODE_DIR		0040000
-#define NFS3MODE_CHR		0020000
-#define NFS3MODE_BLK		0060000
-#define NFS3MODE_REG		0100000
-#define NFS3MODE_LNK		0120000
-#define NFS3MODE_SOCK		0140000
-#define NFS3MODE_FIFO		0010000
+#include <uapi/linux/nfs3.h>
 
-/* Flags for access() call */
-#define NFS3_ACCESS_READ	0x0001
-#define NFS3_ACCESS_LOOKUP	0x0002
-#define NFS3_ACCESS_MODIFY	0x0004
-#define NFS3_ACCESS_EXTEND	0x0008
-#define NFS3_ACCESS_DELETE	0x0010
-#define NFS3_ACCESS_EXECUTE	0x0020
-#define NFS3_ACCESS_FULL	0x003f
-
-/* Flags for create mode */
-enum nfs3_createmode {
-	NFS3_CREATE_UNCHECKED = 0,
-	NFS3_CREATE_GUARDED = 1,
-	NFS3_CREATE_EXCLUSIVE = 2
-};
-
-/* NFSv3 file system properties */
-#define NFS3_FSF_LINK		0x0001
-#define NFS3_FSF_SYMLINK	0x0002
-#define NFS3_FSF_HOMOGENEOUS	0x0008
-#define NFS3_FSF_CANSETTIME	0x0010
-/* Some shorthands. See fs/nfsd/nfs3proc.c */
-#define NFS3_FSF_DEFAULT	0x001B
-#define NFS3_FSF_BILLYBOY	0x0018
-#define NFS3_FSF_READONLY	0x0008
-
-enum nfs3_ftype {
-	NF3NON  = 0,
-	NF3REG  = 1,
-	NF3DIR  = 2,
-	NF3BLK  = 3,
-	NF3CHR  = 4,
-	NF3LNK  = 5,
-	NF3SOCK = 6,
-	NF3FIFO = 7,	/* changed from NFSv2 (was 8) */
-	NF3BAD  = 8
-};
-
-struct nfs3_fh {
-	unsigned short size;
-	unsigned char  data[NFS3_FHSIZE];
-};
-
-#define NFS3_VERSION		3
-#define NFS3PROC_NULL		0
-#define NFS3PROC_GETATTR	1
-#define NFS3PROC_SETATTR	2
-#define NFS3PROC_LOOKUP		3
-#define NFS3PROC_ACCESS		4
-#define NFS3PROC_READLINK	5
-#define NFS3PROC_READ		6
-#define NFS3PROC_WRITE		7
-#define NFS3PROC_CREATE		8
-#define NFS3PROC_MKDIR		9
-#define NFS3PROC_SYMLINK	10
-#define NFS3PROC_MKNOD		11
-#define NFS3PROC_REMOVE		12
-#define NFS3PROC_RMDIR		13
-#define NFS3PROC_RENAME		14
-#define NFS3PROC_LINK		15
-#define NFS3PROC_READDIR	16
-#define NFS3PROC_READDIRPLUS	17
-#define NFS3PROC_FSSTAT		18
-#define NFS3PROC_FSINFO		19
-#define NFS3PROC_PATHCONF	20
-#define NFS3PROC_COMMIT		21
-
-#define NFS_MNT3_VERSION	3
- 
-
-#if defined(__KERNEL__)
 
 /* Number of 32bit words in post_op_attr */
 #define NFS3_POST_OP_ATTR_WORDS		22
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_NFS3_H */
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index af2d2fa30eee..e111fa419a4e 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -9,168 +9,11 @@
  *  Kendrick Smith <kmsmith@umich.edu>
  *  Andy Adamson   <andros@umich.edu>
  */
-
 #ifndef _LINUX_NFS4_H
 #define _LINUX_NFS4_H
 
-#include <linux/types.h>
-
-#define NFS4_BITMAP_SIZE	2
-#define NFS4_VERIFIER_SIZE	8
-#define NFS4_STATEID_SEQID_SIZE 4
-#define NFS4_STATEID_OTHER_SIZE 12
-#define NFS4_STATEID_SIZE	(NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE)
-#define NFS4_FHSIZE		128
-#define NFS4_MAXPATHLEN		PATH_MAX
-#define NFS4_MAXNAMLEN		NAME_MAX
-#define NFS4_OPAQUE_LIMIT	1024
-#define NFS4_MAX_SESSIONID_LEN	16
-
-#define NFS4_ACCESS_READ        0x0001
-#define NFS4_ACCESS_LOOKUP      0x0002
-#define NFS4_ACCESS_MODIFY      0x0004
-#define NFS4_ACCESS_EXTEND      0x0008
-#define NFS4_ACCESS_DELETE      0x0010
-#define NFS4_ACCESS_EXECUTE     0x0020
-
-#define NFS4_FH_PERSISTENT		0x0000
-#define NFS4_FH_NOEXPIRE_WITH_OPEN	0x0001
-#define NFS4_FH_VOLATILE_ANY		0x0002
-#define NFS4_FH_VOL_MIGRATION		0x0004
-#define NFS4_FH_VOL_RENAME		0x0008
-
-#define NFS4_OPEN_RESULT_CONFIRM 0x0002
-#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
-
-#define NFS4_SHARE_ACCESS_MASK	0x000F
-#define NFS4_SHARE_ACCESS_READ	0x0001
-#define NFS4_SHARE_ACCESS_WRITE	0x0002
-#define NFS4_SHARE_ACCESS_BOTH	0x0003
-#define NFS4_SHARE_DENY_READ	0x0001
-#define NFS4_SHARE_DENY_WRITE	0x0002
-#define NFS4_SHARE_DENY_BOTH	0x0003
-
-/* nfs41 */
-#define NFS4_SHARE_WANT_MASK		0xFF00
-#define NFS4_SHARE_WANT_NO_PREFERENCE	0x0000
-#define NFS4_SHARE_WANT_READ_DELEG	0x0100
-#define NFS4_SHARE_WANT_WRITE_DELEG	0x0200
-#define NFS4_SHARE_WANT_ANY_DELEG	0x0300
-#define NFS4_SHARE_WANT_NO_DELEG	0x0400
-#define NFS4_SHARE_WANT_CANCEL		0x0500
-
-#define NFS4_SHARE_WHEN_MASK		0xF0000
-#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL	0x10000
-#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED		0x20000
-
-#define NFS4_CDFC4_FORE	0x1
-#define NFS4_CDFC4_BACK 0x2
-#define NFS4_CDFC4_BOTH 0x3
-#define NFS4_CDFC4_FORE_OR_BOTH 0x3
-#define NFS4_CDFC4_BACK_OR_BOTH 0x7
-
-#define NFS4_CDFS4_FORE 0x1
-#define NFS4_CDFS4_BACK 0x2
-#define NFS4_CDFS4_BOTH 0x3
-
-#define NFS4_SET_TO_SERVER_TIME	0
-#define NFS4_SET_TO_CLIENT_TIME	1
-
-#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
-#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE  1
-#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE   2
-#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE   3
-
-#define ACL4_SUPPORT_ALLOW_ACL 0x01
-#define ACL4_SUPPORT_DENY_ACL  0x02
-#define ACL4_SUPPORT_AUDIT_ACL 0x04
-#define ACL4_SUPPORT_ALARM_ACL 0x08
-
-#define NFS4_ACE_FILE_INHERIT_ACE             0x00000001
-#define NFS4_ACE_DIRECTORY_INHERIT_ACE        0x00000002
-#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE     0x00000004
-#define NFS4_ACE_INHERIT_ONLY_ACE             0x00000008
-#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG   0x00000010
-#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG       0x00000020
-#define NFS4_ACE_IDENTIFIER_GROUP             0x00000040
-
-#define NFS4_ACE_READ_DATA                    0x00000001
-#define NFS4_ACE_LIST_DIRECTORY               0x00000001
-#define NFS4_ACE_WRITE_DATA                   0x00000002
-#define NFS4_ACE_ADD_FILE                     0x00000002
-#define NFS4_ACE_APPEND_DATA                  0x00000004
-#define NFS4_ACE_ADD_SUBDIRECTORY             0x00000004
-#define NFS4_ACE_READ_NAMED_ATTRS             0x00000008
-#define NFS4_ACE_WRITE_NAMED_ATTRS            0x00000010
-#define NFS4_ACE_EXECUTE                      0x00000020
-#define NFS4_ACE_DELETE_CHILD                 0x00000040
-#define NFS4_ACE_READ_ATTRIBUTES              0x00000080
-#define NFS4_ACE_WRITE_ATTRIBUTES             0x00000100
-#define NFS4_ACE_DELETE                       0x00010000
-#define NFS4_ACE_READ_ACL                     0x00020000
-#define NFS4_ACE_WRITE_ACL                    0x00040000
-#define NFS4_ACE_WRITE_OWNER                  0x00080000
-#define NFS4_ACE_SYNCHRONIZE                  0x00100000
-#define NFS4_ACE_GENERIC_READ                 0x00120081
-#define NFS4_ACE_GENERIC_WRITE                0x00160106
-#define NFS4_ACE_GENERIC_EXECUTE              0x001200A0
-#define NFS4_ACE_MASK_ALL                     0x001F01FF
-
-#define EXCHGID4_FLAG_SUPP_MOVED_REFER		0x00000001
-#define EXCHGID4_FLAG_SUPP_MOVED_MIGR		0x00000002
-#define EXCHGID4_FLAG_BIND_PRINC_STATEID	0x00000100
-
-#define EXCHGID4_FLAG_USE_NON_PNFS		0x00010000
-#define EXCHGID4_FLAG_USE_PNFS_MDS		0x00020000
-#define EXCHGID4_FLAG_USE_PNFS_DS		0x00040000
-#define EXCHGID4_FLAG_MASK_PNFS			0x00070000
-
-#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A	0x40000000
-#define EXCHGID4_FLAG_CONFIRMED_R		0x80000000
-/*
- * Since the validity of these bits depends on whether
- * they're set in the argument or response, have separate
- * invalid flag masks for arg (_A) and resp (_R).
- */
-#define EXCHGID4_FLAG_MASK_A			0x40070103
-#define EXCHGID4_FLAG_MASK_R			0x80070103
-
-#define SEQ4_STATUS_CB_PATH_DOWN		0x00000001
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING	0x00000002
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED	0x00000004
-#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED	0x00000008
-#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED	0x00000010
-#define SEQ4_STATUS_ADMIN_STATE_REVOKED		0x00000020
-#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED	0x00000040
-#define SEQ4_STATUS_LEASE_MOVED			0x00000080
-#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED	0x00000100
-#define SEQ4_STATUS_CB_PATH_DOWN_SESSION	0x00000200
-#define SEQ4_STATUS_BACKCHANNEL_FAULT		0x00000400
-
-#define NFS4_SECINFO_STYLE4_CURRENT_FH	0
-#define NFS4_SECINFO_STYLE4_PARENT	1
-
-#define NFS4_MAX_UINT64	(~(u64)0)
-
-/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
- * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
- */
-#define NFS4_MAX_OPS   8
-
-/* Our NFS4 client back channel server only wants the cb_sequene and the
- * actual operation per compound
- */
-#define NFS4_MAX_BACK_CHANNEL_OPS 2
-
-enum nfs4_acl_whotype {
-	NFS4_ACL_WHO_NAMED = 0,
-	NFS4_ACL_WHO_OWNER,
-	NFS4_ACL_WHO_GROUP,
-	NFS4_ACL_WHO_EVERYONE,
-};
-
-#ifdef __KERNEL__
 #include <linux/list.h>
+#include <uapi/linux/nfs4.h>
 
 struct nfs4_ace {
 	uint32_t	type;
@@ -673,10 +516,3 @@ struct nfs4_deviceid {
 };
 
 #endif
-#endif
-
-/*
- * Local variables:
- *  c-basic-offset: 8
- * End:
- */
diff --git a/include/linux/nfs4_mount.h b/include/linux/nfs4_mount.h
deleted file mode 100644
index a0dcf6655657..000000000000
--- a/include/linux/nfs4_mount.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _LINUX_NFS4_MOUNT_H
-#define _LINUX_NFS4_MOUNT_H
-
-/*
- *  linux/include/linux/nfs4_mount.h
- *
- *  Copyright (C) 2002  Trond Myklebust
- *
- *  structure passed from user-space to kernel-space during an nfsv4 mount
- */
-
-/*
- * WARNING!  Do not delete or change the order of these fields.  If
- * a new field is required then add it to the end.  The version field
- * tracks which fields are present.  This will ensure some measure of
- * mount-to-kernel version compatibility.  Some of these aren't used yet
- * but here they are anyway.
- */
-#define NFS4_MOUNT_VERSION	1
-
-struct nfs_string {
-	unsigned int len;
-	const char __user * data;
-};
-
-struct nfs4_mount_data {
-	int version;				/* 1 */
-	int flags;				/* 1 */
-	int rsize;				/* 1 */
-	int wsize;				/* 1 */
-	int timeo;				/* 1 */
-	int retrans;				/* 1 */
-	int acregmin;				/* 1 */
-	int acregmax;				/* 1 */
-	int acdirmin;				/* 1 */
-	int acdirmax;				/* 1 */
-
-	/* see the definition of 'struct clientaddr4' in RFC3010 */
-	struct nfs_string client_addr;		/* 1 */
-
-	/* Mount path */
-	struct nfs_string mnt_path;		/* 1 */
-
-	/* Server details */
-	struct nfs_string hostname;		/* 1 */
-	/* Server IP address */
-	unsigned int host_addrlen;		/* 1 */
-	struct sockaddr __user * host_addr;	/* 1 */
-
-	/* Transport protocol to use */
-	int proto;				/* 1 */
-
-	/* Pseudo-flavours to use for authentication. See RFC2623 */
-	int auth_flavourlen;			/* 1 */
-	int __user *auth_flavours;		/* 1 */
-};
-
-/* bits in the flags field */
-/* Note: the fields that correspond to existing NFSv2/v3 mount options
- * 	 should mirror the values from include/linux/nfs_mount.h
- */
-
-#define NFS4_MOUNT_SOFT		0x0001	/* 1 */
-#define NFS4_MOUNT_INTR		0x0002	/* 1 */
-#define NFS4_MOUNT_NOCTO	0x0010	/* 1 */
-#define NFS4_MOUNT_NOAC		0x0020	/* 1 */
-#define NFS4_MOUNT_STRICTLOCK	0x1000	/* 1 */
-#define NFS4_MOUNT_UNSHARED	0x8000	/* 1 */
-#define NFS4_MOUNT_FLAGMASK	0x9033
-
-#endif
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 334a2f5f6bf1..1cc25682b20b 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -5,38 +5,11 @@
  *
  *  OS-specific nfs filesystem definitions and declarations
  */
-
 #ifndef _LINUX_NFS_FS_H
 #define _LINUX_NFS_FS_H
 
-#include <linux/magic.h>
-
-/* Default timeout values */
-#define NFS_DEF_UDP_TIMEO	(11)
-#define NFS_DEF_UDP_RETRANS	(3)
-#define NFS_DEF_TCP_TIMEO	(600)
-#define NFS_DEF_TCP_RETRANS	(2)
-
-#define NFS_MAX_UDP_TIMEOUT	(60*HZ)
-#define NFS_MAX_TCP_TIMEOUT	(600*HZ)
+#include <uapi/linux/nfs_fs.h>
 
-#define NFS_DEF_ACREGMIN	(3)
-#define NFS_DEF_ACREGMAX	(60)
-#define NFS_DEF_ACDIRMIN	(30)
-#define NFS_DEF_ACDIRMAX	(60)
-
-/*
- * When flushing a cluster of dirty pages, there can be different
- * strategies:
- */
-#define FLUSH_SYNC		1	/* file being synced, or contention */
-#define FLUSH_STABLE		4	/* commit to stable storage */
-#define FLUSH_LOWPRI		8	/* low priority background flush */
-#define FLUSH_HIGHPRI		16	/* high priority memory reclaim flush */
-#define FLUSH_COND_STABLE	32	/* conditional stable write - only stable
-					 * if everything fits in one RPC */
-
-#ifdef __KERNEL__
 
 /*
  * Enable dprintk() debugging support for nfs client.
@@ -613,29 +586,6 @@ nfs_fileid_to_ino_t(u64 fileid)
 
 #define NFS_JUKEBOX_RETRY_TIME (5 * HZ)
 
-#endif /* __KERNEL__ */
-
-/*
- * NFS debug flags
- */
-#define NFSDBG_VFS		0x0001
-#define NFSDBG_DIRCACHE		0x0002
-#define NFSDBG_LOOKUPCACHE	0x0004
-#define NFSDBG_PAGECACHE	0x0008
-#define NFSDBG_PROC		0x0010
-#define NFSDBG_XDR		0x0020
-#define NFSDBG_FILE		0x0040
-#define NFSDBG_ROOT		0x0080
-#define NFSDBG_CALLBACK		0x0100
-#define NFSDBG_CLIENT		0x0200
-#define NFSDBG_MOUNT		0x0400
-#define NFSDBG_FSCACHE		0x0800
-#define NFSDBG_PNFS		0x1000
-#define NFSDBG_PNFS_LD		0x2000
-#define NFSDBG_STATE		0x4000
-#define NFSDBG_ALL		0xFFFF
-
-#ifdef __KERNEL__
 
 # undef ifdebug
 # ifdef NFS_DEBUG
@@ -645,6 +595,4 @@ nfs_fileid_to_ino_t(u64 fileid)
 #  define ifdebug(fac)		if (0)
 #  define NFS_IFDEBUG(x)
 # endif
-#endif /* __KERNEL */
-
 #endif
diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h
index ece91c57ad79..2dcef3ab58b6 100644
--- a/include/linux/nfs_idmap.h
+++ b/include/linux/nfs_idmap.h
@@ -33,35 +33,11 @@
  *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
-
 #ifndef NFS_IDMAP_H
 #define NFS_IDMAP_H
 
-#include <linux/types.h>
-
-/* XXX from bits/utmp.h  */
-#define IDMAP_NAMESZ  128
-
-#define IDMAP_TYPE_USER  0
-#define IDMAP_TYPE_GROUP 1
-
-#define IDMAP_CONV_IDTONAME 0
-#define IDMAP_CONV_NAMETOID 1
+#include <uapi/linux/nfs_idmap.h>
 
-#define IDMAP_STATUS_INVALIDMSG 0x01
-#define IDMAP_STATUS_AGAIN      0x02
-#define IDMAP_STATUS_LOOKUPFAIL 0x04
-#define IDMAP_STATUS_SUCCESS    0x08
-
-struct idmap_msg {
-	__u8  im_type;
-	__u8  im_conv;
-	char  im_name[IDMAP_NAMESZ];
-	__u32 im_id;
-	__u8  im_status;
-};
-
-#ifdef __KERNEL__
 
 /* Forward declaration to make this header independent of others */
 struct nfs_client;
@@ -97,6 +73,4 @@ int nfs_map_uid_to_name(const struct nfs_server *, __u32, char *, size_t);
 int nfs_map_gid_to_group(const struct nfs_server *, __u32, char *, size_t);
 
 extern unsigned int nfs_idmap_cache_timeout;
-#endif /* __KERNEL__ */
-
 #endif /* NFS_IDMAP_H */
diff --git a/include/linux/nfs_mount.h b/include/linux/nfs_mount.h
deleted file mode 100644
index 576bddd72e04..000000000000
--- a/include/linux/nfs_mount.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _LINUX_NFS_MOUNT_H
-#define _LINUX_NFS_MOUNT_H
-
-/*
- *  linux/include/linux/nfs_mount.h
- *
- *  Copyright (C) 1992  Rick Sladkey
- *
- *  structure passed from user-space to kernel-space during an nfs mount
- */
-#include <linux/in.h>
-#include <linux/nfs.h>
-#include <linux/nfs2.h>
-#include <linux/nfs3.h>
-
-/*
- * WARNING!  Do not delete or change the order of these fields.  If
- * a new field is required then add it to the end.  The version field
- * tracks which fields are present.  This will ensure some measure of
- * mount-to-kernel version compatibility.  Some of these aren't used yet
- * but here they are anyway.
- */
-#define NFS_MOUNT_VERSION	6
-#define NFS_MAX_CONTEXT_LEN	256
-
-struct nfs_mount_data {
-	int		version;		/* 1 */
-	int		fd;			/* 1 */
-	struct nfs2_fh	old_root;		/* 1 */
-	int		flags;			/* 1 */
-	int		rsize;			/* 1 */
-	int		wsize;			/* 1 */
-	int		timeo;			/* 1 */
-	int		retrans;		/* 1 */
-	int		acregmin;		/* 1 */
-	int		acregmax;		/* 1 */
-	int		acdirmin;		/* 1 */
-	int		acdirmax;		/* 1 */
-	struct sockaddr_in addr;		/* 1 */
-	char		hostname[NFS_MAXNAMLEN + 1];		/* 1 */
-	int		namlen;			/* 2 */
-	unsigned int	bsize;			/* 3 */
-	struct nfs3_fh	root;			/* 4 */
-	int		pseudoflavor;		/* 5 */
-	char		context[NFS_MAX_CONTEXT_LEN + 1];	/* 6 */
-};
-
-/* bits in the flags field visible to user space */
-
-#define NFS_MOUNT_SOFT		0x0001	/* 1 */
-#define NFS_MOUNT_INTR		0x0002	/* 1 */ /* now unused, but ABI */
-#define NFS_MOUNT_SECURE	0x0004	/* 1 */
-#define NFS_MOUNT_POSIX		0x0008	/* 1 */
-#define NFS_MOUNT_NOCTO		0x0010	/* 1 */
-#define NFS_MOUNT_NOAC		0x0020	/* 1 */
-#define NFS_MOUNT_TCP		0x0040	/* 2 */
-#define NFS_MOUNT_VER3		0x0080	/* 3 */
-#define NFS_MOUNT_KERBEROS	0x0100	/* 3 */
-#define NFS_MOUNT_NONLM		0x0200	/* 3 */
-#define NFS_MOUNT_BROKEN_SUID	0x0400	/* 4 */
-#define NFS_MOUNT_NOACL		0x0800	/* 4 */
-#define NFS_MOUNT_STRICTLOCK	0x1000	/* reserved for NFSv4 */
-#define NFS_MOUNT_SECFLAVOUR	0x2000	/* 5 */
-#define NFS_MOUNT_NORDIRPLUS	0x4000	/* 5 */
-#define NFS_MOUNT_UNSHARED	0x8000	/* 5 */
-#define NFS_MOUNT_FLAGMASK	0xFFFF
-
-/* The following are for internal use only */
-#define NFS_MOUNT_LOOKUP_CACHE_NONEG	0x10000
-#define NFS_MOUNT_LOOKUP_CACHE_NONE	0x20000
-#define NFS_MOUNT_NORESVPORT		0x40000
-#define NFS_MOUNT_LEGACY_INTERFACE	0x80000
-
-#define NFS_MOUNT_LOCAL_FLOCK	0x100000
-#define NFS_MOUNT_LOCAL_FCNTL	0x200000
-
-#endif
diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h
index fabcb1e5c460..5e69e67b31ab 100644
--- a/include/linux/nfsacl.h
+++ b/include/linux/nfsacl.h
@@ -6,30 +6,10 @@
 #ifndef __LINUX_NFSACL_H
 #define __LINUX_NFSACL_H
 
-#define NFS_ACL_PROGRAM	100227
-
-#define ACLPROC2_GETACL		1
-#define ACLPROC2_SETACL		2
-#define ACLPROC2_GETATTR	3
-#define ACLPROC2_ACCESS		4
-
-#define ACLPROC3_GETACL		1
-#define ACLPROC3_SETACL		2
-
-
-/* Flags for the getacl/setacl mode */
-#define NFS_ACL			0x0001
-#define NFS_ACLCNT		0x0002
-#define NFS_DFACL		0x0004
-#define NFS_DFACLCNT		0x0008
-
-/* Flag for Default ACL entries */
-#define NFS_ACL_DEFAULT		0x1000
-
-#ifdef __KERNEL__
 
 #include <linux/posix_acl.h>
 #include <linux/sunrpc/xdr.h>
+#include <uapi/linux/nfsacl.h>
 
 /* Maximum number of ACL entries over NFS */
 #define NFS_ACL_MAX_ENTRIES	1024
@@ -58,5 +38,4 @@ extern int
 nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt,
 	      struct posix_acl **pacl);
 
-#endif /* __KERNEL__ */
 #endif  /* __LINUX_NFSACL_H */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
deleted file mode 100644
index 7df9b500c804..000000000000
--- a/include/linux/nl80211.h
+++ /dev/null
@@ -1,3072 +0,0 @@
-#ifndef __LINUX_NL80211_H
-#define __LINUX_NL80211_H
-/*
- * 802.11 netlink interface public header
- *
- * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
- * Copyright 2008 Michael Buesch <m@bues.ch>
- * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
- * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
- * Copyright 2008 Colin McCabe <colin@cozybit.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/types.h>
-
-/**
- * DOC: Station handling
- *
- * Stations are added per interface, but a special case exists with VLAN
- * interfaces. When a station is bound to an AP interface, it may be moved
- * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
- * The station is still assumed to belong to the AP interface it was added
- * to.
- *
- * TODO: need more info?
- */
-
-/**
- * DOC: Frame transmission/registration support
- *
- * Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
- * that are not being handled by the kernel. This includes, for example,
- * certain classes of action frames that cannot be handled in the kernel
- * for various reasons.
- *
- * Frame registration is done on a per-interface basis and registrations
- * cannot be removed other than by closing the socket. It is possible to
- * specify a registration filter to register, for example, only for a
- * certain type of action frame. In particular with action frames, those
- * that userspace registers for will not be returned as unhandled by the
- * driver, so that the registered application has to take responsibility
- * for doing that.
- *
- * The type of frame that can be registered for is also dependent on the
- * driver and interface type. The frame types are advertised in wiphy
- * attributes so applications know what to expect.
- *
- * NOTE: When an interface changes type while registrations are active,
- *       these registrations are ignored until the interface type is
- *       changed again. This means that changing the interface type can
- *       lead to a situation that couldn't otherwise be produced, but
- *       any such registrations will be dormant in the sense that they
- *       will not be serviced, i.e. they will not receive any frames.
- *
- * Frame transmission allows userspace to send for example the required
- * responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
- * status is indicated to the sending socket.
- *
- * For more technical details, see the corresponding command descriptions
- * below.
- */
-
-/**
- * DOC: Virtual interface / concurrency capabilities
- *
- * Some devices are able to operate with virtual MACs, they can have
- * more than one virtual interface. The capability handling for this
- * is a bit complex though, as there may be a number of restrictions
- * on the types of concurrency that are supported.
- *
- * To start with, each device supports the interface types listed in
- * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
- * types there no concurrency is implied.
- *
- * Once concurrency is desired, more attributes must be observed:
- * To start with, since some interface types are purely managed in
- * software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
- * are only restricted by some semantic restrictions (e.g. AP-VLAN
- * cannot be added without a corresponding AP interface). This list
- * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
- *
- * Further, the list of supported combinations is exported. This is
- * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
- * it exports a list of "groups", and at any point in time the
- * interfaces that are currently active must fall into any one of
- * the advertised groups. Within each group, there are restrictions
- * on the number of interfaces of different types that are supported
- * and also the number of different channels, along with potentially
- * some other restrictions. See &enum nl80211_if_combination_attrs.
- *
- * All together, these attributes define the concurrency of virtual
- * interfaces that a given device supports.
- */
-
-/**
- * enum nl80211_commands - supported nl80211 commands
- *
- * @NL80211_CMD_UNSPEC: unspecified command to catch errors
- *
- * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
- *	to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
- *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
- *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
- *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
- *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
- *	instead, the support here is for backward compatibility only.
- * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
- *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
- *	%NL80211_ATTR_WIPHY_NAME.
- * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
- *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
- *
- * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
- *	either a dump request on a %NL80211_ATTR_WIPHY or a specific get
- *	on an %NL80211_ATTR_IFINDEX is supported.
- * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
- * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
- *	to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
- *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
- *	be sent from userspace to request creation of a new virtual interface,
- *	then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
- *	%NL80211_ATTR_IFNAME.
- * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
- *	userspace to request deletion of a virtual interface, then requires
- *	attribute %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
- *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
- * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
- *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
- * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
- *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
- *	and %NL80211_ATTR_KEY_SEQ attributes.
- * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
- *	or %NL80211_ATTR_MAC.
- *
- * @NL80211_CMD_GET_BEACON: (not used)
- * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
- *	using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
- *	attributes. For drivers that generate the beacon and probe responses
- *	internally, the following attributes must be provided: %NL80211_ATTR_IE,
- *	%NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
- * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
- *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
- *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
- *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
- *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- *	%NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
- *	The channel to use can be set on the interface or be given using the
- *	%NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs.
- * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
- * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
- * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
- *
- * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
- *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
- *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
- *	the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all stations, on the interface identified
- *	by %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
- *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
- * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
- *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- *	the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all mesh paths, on the interface identified
- *	by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
- *	%NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
- * 	regulatory domain.
- * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
- *	after being queried by the kernel. CRDA replies by sending a regulatory
- *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
- *	current alpha2 if it found a match. It also provides
- * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * 	regulatory rule is a nested set of attributes  given by
- * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
- * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * 	store this as a valid request and then query userspace for it.
- *
- * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
- *	interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
- *      interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
- *	interface is identified with %NL80211_ATTR_IFINDEX and the management
- *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
- *	added to the end of the specified management frame is specified with
- *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
- *	added to all specified management frames generated by
- *	kernel/firmware/driver.
- *	Note: This command has been removed and it is only reserved at this
- *	point to avoid re-using existing command number. The functionality this
- *	command was planned for has been provided with cleaner design with the
- *	option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
- *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
- *	NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_CMD_GET_SCAN: get scan results
- * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
- *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- *	probe requests at CCK rate or not.
- * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
- *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
- * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
- *	partial scan results may be available
- *
- * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
- *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
- *	are passed, they are used in the probe requests.  For
- *	broadcast, a broadcast SSID must be passed (ie. an empty
- *	string).  If no SSID is passed, no probe requests are sent and
- *	a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
- *	if passed, define which channels should be scanned; if not
- *	passed, all channels allowed for the current regulatory domain
- *	are used.  Extra IEs can also be passed from the userspace by
- *	using the %NL80211_ATTR_IE attribute.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan.  Returns -ENOENT
- *	if scheduled scan is not running.
- * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
- *	results available.
- * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
- *	stopped.  The driver may issue this event at any time during a
- *	scheduled scan.  One reason for stopping the scan is if the hardware
- *	does not support starting an association or a normal scan while running
- *	a scheduled scan.  This event is also sent when the
- *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
- *	is brought down while a scheduled scan was running.
- *
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
- *      or noise level
- * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
- *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
- *
- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
- *	(for the BSSID) and %NL80211_ATTR_PMKID.
- * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
- *	(for the BSSID) and %NL80211_ATTR_PMKID.
- * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
- *
- * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * 	has been changed and provides details of the request information
- * 	that caused the change such as who initiated the regulatory request
- * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * 	to (%NL80211_ATTR_REG_ALPHA2).
- * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * 	has been found while world roaming thus enabling active scan or
- * 	any mode of operation that initiates TX (beacons) on a channel
- * 	where we would not have been able to do either before. As an example
- * 	if you are world roaming (regulatory domain set to world or if your
- * 	driver is using a custom world roaming regulatory domain) and while
- * 	doing a passive scan on the 5 GHz band you find an AP there (if not
- * 	on a DFS channel) you will now be able to actively scan for that AP
- * 	or use AP mode on your card on that same channel. Note that this will
- * 	never be used for channels 1-11 on the 2 GHz band as they are always
- * 	enabled world wide. This beacon hint is only sent if your device had
- * 	either disabled active scanning or beaconing on a channel. We send to
- * 	userspace the wiphy on which we removed a restriction from
- * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * 	the beacon hint was processed.
- *
- * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
- *	This command is used both as a command (request to authenticate) and
- *	as an event on the "mlme" multicast group indicating completion of the
- *	authentication process.
- *	When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
- *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
- *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
- *	the SSID (mainly for association, but is included in authentication
- *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
- *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
- *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
- *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
- *	to be added to the frame.
- *	When used as an event, this reports reception of an Authentication
- *	frame in station and IBSS modes when the local MLME processed the
- *	frame, i.e., it was for the local STA and was received in correct
- *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
- *	MLME SAP interface (kernel providing MLME, userspace SME). The
- *	included %NL80211_ATTR_FRAME attribute contains the management frame
- *	(including both the header and frame body, but not FCS). This event is
- *	also used to indicate if the authentication attempt timed out. In that
- *	case the %NL80211_ATTR_FRAME attribute is replaced with a
- *	%NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
- *	pending authentication timed out).
- * @NL80211_CMD_ASSOCIATE: association request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
- *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
- *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
- * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
- *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
- *	primitives).
- * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
- *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
- *
- * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
- *	MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
- *	event includes %NL80211_ATTR_MAC to describe the source MAC address of
- *	the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
- *	type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
- *	%NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
- *	event matches with MLME-MICHAELMICFAILURE.indication() primitive
- *
- * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
- *	FREQ attribute (for the initial frequency if no peer can be found)
- *	and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
- *	should be fixed rather than automatically determined. Can only be
- *	executed on a network interface that is UP, and fixed BSSID/FREQ
- *	may be rejected. Another optional parameter is the beacon interval,
- *	given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
- *	given defaults to 100 TU (102.4ms).
- * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
- *	determined by the network interface.
- *
- * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
- *	to identify the device, and the TESTDATA blob attribute to pass through
- *	to the driver.
- *
- * @NL80211_CMD_CONNECT: connection request and notification; this command
- *	requests to connect to a specified network but without separating
- *	auth and assoc steps. For this, you need to specify the SSID in a
- *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
- *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
- *	%NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
- *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
- *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
- *	Background scan period can optionally be
- *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
- *	if not specified default background scan configuration
- *	in driver is used and if period value is 0, bg scan will be disabled.
- *	This attribute is ignored if driver does not support roam scan.
- *	It is also sent as an event, with the BSSID and response IEs when the
- *	connection is established or failed to be established. This can be
- *	determined by the STATUS_CODE attribute.
- * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
- *	sent as an event when the card/driver roamed by itself.
- * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
- *	userspace that a connection was dropped by the AP or due to other
- *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
- *	%NL80211_ATTR_REASON_CODE attributes are used.
- *
- * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
- *	associated with this wiphy must be down and will follow.
- *
- * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
- *	channel for the specified amount of time. This can be used to do
- *	off-channel operations like transmit a Public Action frame and wait for
- *	a response while being associated to an AP on another channel.
- *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
- *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
- *	frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
- *	optionally used to specify additional channel parameters.
- *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
- *	to remain on the channel. This command is also used as an event to
- *	notify when the requested duration starts (it may take a while for the
- *	driver to schedule this time due to other concurrent needs for the
- *	radio).
- *	When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
- *	that will be included with any events pertaining to this request;
- *	the cookie is also used to cancel the request.
- * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
- *	pending remain-on-channel duration if the desired operation has been
- *	completed prior to expiration of the originally requested duration.
- *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
- *	radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
- *	uniquely identify the request.
- *	This command is also used as an event to notify when a requested
- *	remain-on-channel duration has expired.
- *
- * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
- *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
- *	and @NL80211_ATTR_TX_RATES the set of allowed rates.
- *
- * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
- *	(via @NL80211_CMD_FRAME) for processing in userspace. This command
- *	requires an interface index, a frame type attribute (optional for
- *	backward compatibility reasons, if not given assumes action frames)
- *	and a match attribute containing the first few bytes of the frame
- *	that should match, e.g. a single byte for only a category match or
- *	four bytes for vendor frames including the OUI. The registration
- *	cannot be dropped, but is removed automatically when the netlink
- *	socket is closed. Multiple registrations can be made.
- * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
- *	backward compatibility
- * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
- *	command is used both as a request to transmit a management frame and
- *	as an event indicating reception of a frame that was not processed in
- *	kernel code, but is for us (i.e., which may need to be processed in a
- *	user space application). %NL80211_ATTR_FRAME is used to specify the
- *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
- *	optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
- *	which channel the frame is to be transmitted or was received. If this
- *	channel is not the current channel (remain-on-channel or the
- *	operational channel) the device will switch to the given channel and
- *	transmit the frame, optionally waiting for a response for the time
- *	specified using %NL80211_ATTR_DURATION. When called, this operation
- *	returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
- *	TX status event pertaining to the TX request.
- *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- *	management frames at CCK rate or not in 2GHz band.
- * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
- *	command may be used with the corresponding cookie to cancel the wait
- *	time if it is known that it is no longer necessary.
- * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
- * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
- *	transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
- *	the TX command and %NL80211_ATTR_FRAME includes the contents of the
- *	frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
- *	the frame.
- * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
- *	backward compatibility.
- *
- * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
- * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
- *
- * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
- *	is used to configure connection quality monitoring notification trigger
- *	levels.
- * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
- *	command is used as an event to indicate the that a trigger level was
- *	reached.
- * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
- *	and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
- *	by %NL80211_ATTR_IFINDEX) shall operate on.
- *	In case multiple channels are supported by the device, the mechanism
- *	with which it switches channels is implementation-defined.
- *	When a monitor interface is given, it can only switch channel while
- *	no other interfaces are operating to avoid disturbing the operation
- *	of any other interfaces, and other interfaces will again take
- *	precedence when they are used.
- *
- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
- *
- * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
- *	mesh config parameters may be given.
- * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
- *	network is determined by the network interface.
- *
- * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
- *	notification. This event is used to indicate that an unprotected
- *	deauthentication frame was dropped when MFP is in use.
- * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
- *	notification. This event is used to indicate that an unprotected
- *	disassociation frame was dropped when MFP is in use.
- *
- * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
- *      beacon or probe response from a compatible mesh peer.  This is only
- *      sent while no station information (sta_info) exists for the new peer
- *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set.  On
- *      reception of this notification, userspace may decide to create a new
- *      station (@NL80211_CMD_NEW_STATION).  To stop this notification from
- *      reoccurring, the userspace authentication daemon may want to create the
- *      new station with the AUTHENTICATED flag unset and maybe change it later
- *      depending on the authentication result.
- *
- * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
- * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
- *	Since wireless is more complex than wired ethernet, it supports
- *	various triggers. These triggers can be configured through this
- *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
- *	more background information, see
- *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
- *
- * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
- *	the necessary information for supporting GTK rekey offload. This
- *	feature is typically used during WoWLAN. The configuration data
- *	is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
- *	contains the data in sub-attributes). After rekeying happened,
- *	this command may also be sent by the driver as an MLME event to
- *	inform userspace of the new replay counter.
- *
- * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- *	of PMKSA caching dandidates.
- *
- * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
- * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
- *
- * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
- *	(or GO) interface (i.e. hostapd) to ask for unexpected frames to
- *	implement sending deauth to stations that send unexpected class 3
- *	frames. Also used as the event sent by the kernel when such a frame
- *	is received.
- *	For the event, the %NL80211_ATTR_MAC attribute carries the TA and
- *	other attributes like the interface index are present.
- *	If used as the command it must have an interface index and you can
- *	only unsubscribe from the event by closing the socket. Subscription
- *	is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
- *
- * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
- *	associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
- *	and wasn't already in a 4-addr VLAN. The event will be sent similarly
- *	to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
- *
- * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
- *	by sending a null data frame to it and reporting when the frame is
- *	acknowleged. This is used to allow timing out inactive clients. Uses
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
- *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
- *	up the event with the request. The event includes the same data and
- *	has %NL80211_ATTR_ACK set if the frame was ACKed.
- *
- * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
- *	other BSSes when any interfaces are in AP mode. This helps implement
- *	OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
- *	messages. Note that per PHY only one application may register.
- *
- * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
- *      No Acknowledgement Policy should be applied.
- *
- * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
- *	independently of the userspace SME, send this event indicating
- *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
- *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE.
- *
- * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
- *	its %NL80211_ATTR_WDEV identifier. It must have been created with
- *	%NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
- *	P2P Device can be used for P2P operations, e.g. remain-on-channel and
- *	public action frame TX.
- * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
- *	its %NL80211_ATTR_WDEV identifier.
- *
- * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to
- *	notify userspace that AP has rejected the connection request from a
- *	station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
- *	is used for this.
- *
- * @NL80211_CMD_MAX: highest used command number
- * @__NL80211_CMD_AFTER_LAST: internal use
- */
-enum nl80211_commands {
-/* don't change the order or add anything between, this is ABI! */
-	NL80211_CMD_UNSPEC,
-
-	NL80211_CMD_GET_WIPHY,		/* can dump */
-	NL80211_CMD_SET_WIPHY,
-	NL80211_CMD_NEW_WIPHY,
-	NL80211_CMD_DEL_WIPHY,
-
-	NL80211_CMD_GET_INTERFACE,	/* can dump */
-	NL80211_CMD_SET_INTERFACE,
-	NL80211_CMD_NEW_INTERFACE,
-	NL80211_CMD_DEL_INTERFACE,
-
-	NL80211_CMD_GET_KEY,
-	NL80211_CMD_SET_KEY,
-	NL80211_CMD_NEW_KEY,
-	NL80211_CMD_DEL_KEY,
-
-	NL80211_CMD_GET_BEACON,
-	NL80211_CMD_SET_BEACON,
-	NL80211_CMD_START_AP,
-	NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
-	NL80211_CMD_STOP_AP,
-	NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
-
-	NL80211_CMD_GET_STATION,
-	NL80211_CMD_SET_STATION,
-	NL80211_CMD_NEW_STATION,
-	NL80211_CMD_DEL_STATION,
-
-	NL80211_CMD_GET_MPATH,
-	NL80211_CMD_SET_MPATH,
-	NL80211_CMD_NEW_MPATH,
-	NL80211_CMD_DEL_MPATH,
-
-	NL80211_CMD_SET_BSS,
-
-	NL80211_CMD_SET_REG,
-	NL80211_CMD_REQ_SET_REG,
-
-	NL80211_CMD_GET_MESH_CONFIG,
-	NL80211_CMD_SET_MESH_CONFIG,
-
-	NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
-
-	NL80211_CMD_GET_REG,
-
-	NL80211_CMD_GET_SCAN,
-	NL80211_CMD_TRIGGER_SCAN,
-	NL80211_CMD_NEW_SCAN_RESULTS,
-	NL80211_CMD_SCAN_ABORTED,
-
-	NL80211_CMD_REG_CHANGE,
-
-	NL80211_CMD_AUTHENTICATE,
-	NL80211_CMD_ASSOCIATE,
-	NL80211_CMD_DEAUTHENTICATE,
-	NL80211_CMD_DISASSOCIATE,
-
-	NL80211_CMD_MICHAEL_MIC_FAILURE,
-
-	NL80211_CMD_REG_BEACON_HINT,
-
-	NL80211_CMD_JOIN_IBSS,
-	NL80211_CMD_LEAVE_IBSS,
-
-	NL80211_CMD_TESTMODE,
-
-	NL80211_CMD_CONNECT,
-	NL80211_CMD_ROAM,
-	NL80211_CMD_DISCONNECT,
-
-	NL80211_CMD_SET_WIPHY_NETNS,
-
-	NL80211_CMD_GET_SURVEY,
-	NL80211_CMD_NEW_SURVEY_RESULTS,
-
-	NL80211_CMD_SET_PMKSA,
-	NL80211_CMD_DEL_PMKSA,
-	NL80211_CMD_FLUSH_PMKSA,
-
-	NL80211_CMD_REMAIN_ON_CHANNEL,
-	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
-
-	NL80211_CMD_SET_TX_BITRATE_MASK,
-
-	NL80211_CMD_REGISTER_FRAME,
-	NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
-	NL80211_CMD_FRAME,
-	NL80211_CMD_ACTION = NL80211_CMD_FRAME,
-	NL80211_CMD_FRAME_TX_STATUS,
-	NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
-
-	NL80211_CMD_SET_POWER_SAVE,
-	NL80211_CMD_GET_POWER_SAVE,
-
-	NL80211_CMD_SET_CQM,
-	NL80211_CMD_NOTIFY_CQM,
-
-	NL80211_CMD_SET_CHANNEL,
-	NL80211_CMD_SET_WDS_PEER,
-
-	NL80211_CMD_FRAME_WAIT_CANCEL,
-
-	NL80211_CMD_JOIN_MESH,
-	NL80211_CMD_LEAVE_MESH,
-
-	NL80211_CMD_UNPROT_DEAUTHENTICATE,
-	NL80211_CMD_UNPROT_DISASSOCIATE,
-
-	NL80211_CMD_NEW_PEER_CANDIDATE,
-
-	NL80211_CMD_GET_WOWLAN,
-	NL80211_CMD_SET_WOWLAN,
-
-	NL80211_CMD_START_SCHED_SCAN,
-	NL80211_CMD_STOP_SCHED_SCAN,
-	NL80211_CMD_SCHED_SCAN_RESULTS,
-	NL80211_CMD_SCHED_SCAN_STOPPED,
-
-	NL80211_CMD_SET_REKEY_OFFLOAD,
-
-	NL80211_CMD_PMKSA_CANDIDATE,
-
-	NL80211_CMD_TDLS_OPER,
-	NL80211_CMD_TDLS_MGMT,
-
-	NL80211_CMD_UNEXPECTED_FRAME,
-
-	NL80211_CMD_PROBE_CLIENT,
-
-	NL80211_CMD_REGISTER_BEACONS,
-
-	NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
-
-	NL80211_CMD_SET_NOACK_MAP,
-
-	NL80211_CMD_CH_SWITCH_NOTIFY,
-
-	NL80211_CMD_START_P2P_DEVICE,
-	NL80211_CMD_STOP_P2P_DEVICE,
-
-	NL80211_CMD_CONN_FAILED,
-
-	/* add new commands above here */
-
-	/* used to define NL80211_CMD_MAX below */
-	__NL80211_CMD_AFTER_LAST,
-	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
-};
-
-/*
- * Allow user space programs to use #ifdef on new commands by defining them
- * here
- */
-#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
-#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
-#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
-#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
-#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
-#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
-#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
-#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
-
-#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
-
-/* source-level API compatibility */
-#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
-#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
-#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
-
-/**
- * enum nl80211_attrs - nl80211 netlink attributes
- *
- * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
- *
- * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
- *	/sys/class/ieee80211/<phyname>/index
- * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
- * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
- * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
- * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
- *	if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
- *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
- *		this attribute)
- *	NL80211_CHAN_HT20 = HT20 only
- *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
- *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
- * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
- *	less than or equal to the RTS threshold; allowed range: 1..255;
- *	dot11ShortRetryLimit; u8
- * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
- *	greater than the RTS threshold; allowed range: 1..255;
- *	dot11ShortLongLimit; u8
- * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
- *	length in octets for frames; allowed range: 256..8000, disable
- *	fragmentation with (u32)-1; dot11FragmentationThreshold; u32
- * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
- *	larger than or equal to this use RTS/CTS handshake); allowed range:
- *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
- * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
- *	section 7.3.2.9; dot11CoverageClass; u8
- *
- * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
- * @NL80211_ATTR_IFNAME: network interface name
- * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
- *
- * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices
- *	that don't have a netdev (u64)
- *
- * @NL80211_ATTR_MAC: MAC address (various uses)
- *
- * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
- *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- *	keys
- * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- *	section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- *	CCMP keys, each six bytes in little endian
- * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
- * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
- *	default management key
- * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
- *	other commands, indicates which pairwise cipher suites are used
- * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
- *	other commands, indicates which group cipher suite is used
- *
- * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
- * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
- * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
- * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
- *
- * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
- * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
- *	&enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
- * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
- *	IEEE 802.11 7.3.1.6 (u16).
- * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
- *	rates as defined by IEEE 802.11 7.3.2.2 but without the length
- *	restriction (at most %NL80211_MAX_SUPP_RATES).
- * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
- *	to, or the AP interface the station was originally added to to.
- * @NL80211_ATTR_STA_INFO: information about a station, part of station info
- *	given for %NL80211_CMD_GET_STATION, nested attribute containing
- *	info as possible, see &enum nl80211_sta_info.
- *
- * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
- *	consisting of a nested array.
- *
- * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
- * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
- * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
- *	&enum nl80211_mpath_info.
- *
- * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
- *      &enum nl80211_mntr_flags.
- *
- * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * 	current regulatory domain should be set to or is already set to.
- * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * 	to query the CRDA to retrieve one regulatory domain. This attribute can
- * 	also be used by userspace to query the kernel for the currently set
- * 	regulatory domain. We chose an alpha2 as that is also used by the
- * 	IEEE-802.11d country information element to identify a country.
- * 	Users can also simply ask the wireless core to set regulatory domain
- * 	to a specific alpha2.
- * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
- *	rules.
- *
- * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
- *	(u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
- *	(u8, 0 or 1)
- * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
- *	rates in format defined by IEEE 802.11 7.3.2.2 but without the length
- *	restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
- *	association request when used with NL80211_CMD_NEW_STATION)
- *
- * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
- *	supported interface types, each a flag attribute with the number
- *	of the interface mode.
- *
- * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
- *	%NL80211_CMD_SET_MGMT_EXTRA_IE.
- *
- * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
- *	%NL80211_CMD_SET_MGMT_EXTRA_IE).
- *
- * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
- *	a single scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
- *	scan with a single scheduled scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
- *	that can be added to a scan request
- * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
- *	elements that can be added to a scheduled scan request
- * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
- *	used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
- *
- * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
- * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
- *	scanning and include a zero-length SSID (wildcard) for wildcard scan
- * @NL80211_ATTR_BSS: scan result BSS
- *
- * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
- * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
- *
- * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
- *	an array of command numbers (i.e. a mapping index to command number)
- *	that the driver for the given wiphy supports.
- *
- * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
- *	and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
- *	NL80211_CMD_ASSOCIATE events
- * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
- * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
- *	represented as a u32
- * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
- *	%NL80211_CMD_DISASSOCIATE, u16
- *
- * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
- *	a u32
- *
- * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _before_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
- * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _after_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
- *
- * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
- *	cipher suites
- *
- * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
- *	for other networks on different channels
- *
- * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
- *	is used, e.g., with %NL80211_CMD_AUTHENTICATE event
- *
- * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
- *	used for the association (&enum nl80211_mfp, represented as a u32);
- *	this attribute can be used
- *	with %NL80211_CMD_ASSOCIATE request
- *
- * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
- *	&struct nl80211_sta_flag_update.
- *
- * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
- *	IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
- *	station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
- *	request, the driver will assume that the port is unauthorized until
- *	authorized by user space. Otherwise, port is marked authorized by
- *	default in station mode.
- * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
- *	ethertype that will be used for key negotiation. It can be
- *	specified with the associate and connect commands. If it is not
- *	specified, the value defaults to 0x888E (PAE, 802.1X). This
- *	attribute is also used as a flag in the wiphy information to
- *	indicate that protocols other than PAE are supported.
- * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
- *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
- *	ethertype frames used for key negotiation must not be encrypted.
- *
- * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
- *	We recommend using nested, driver-specific attributes within this.
- *
- * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
- *	event was due to the AP disconnecting the station, and not due to
- *	a local disconnect request.
- * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
- *	event (u16)
- * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
- *	that protected APs should be used. This is also used with NEW_BEACON to
- *	indicate that the BSS is to use protection.
- *
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- *	to indicate which unicast key ciphers will be used with the connection
- *	(an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which group key cipher will be used with the connection (a
- *	u32).
- * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which WPA version(s) the AP we want to associate with is using
- *	(a u32 with flags from &enum nl80211_wpa_versions).
- * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which key management algorithm(s) to use (an array of u32).
- *
- * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
- *	sent out by the card, for ROAM and successful CONNECT events.
- * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
- *	sent by peer, for ROAM and successful CONNECT events.
- *
- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
- *	commands to specify using a reassociate frame
- *
- * @NL80211_ATTR_KEY: key information in a nested attribute with
- *	%NL80211_KEY_* sub-attributes
- * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
- *	and join_ibss(), key information is in a nested attribute each
- *	with %NL80211_KEY_* sub-attributes
- *
- * @NL80211_ATTR_PID: Process ID of a network namespace.
- *
- * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
- *	dumps. This number increases whenever the object list being
- *	dumped changes, and as such userspace can verify that it has
- *	obtained a complete and consistent snapshot by verifying that
- *	all dump messages contain the same generation number. If it
- *	changed then the list changed and the dump should be repeated
- *	completely from scratch.
- *
- * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
- *
- * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
- *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
- *      containing info as possible, see &enum survey_info.
- *
- * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
- * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
- *	cache, a wiphy attribute.
- *
- * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
- * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
- *	specifies the maximum duration that can be requested with the
- *	remain-on-channel operation, in milliseconds, u32.
- *
- * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
- *
- * @NL80211_ATTR_TX_RATES: Nested set of attributes
- *	(enum nl80211_tx_rate_attributes) describing TX rates per band. The
- *	enum nl80211_band value is used as the index (nla_type() of the nested
- *	data. If a band is not included, it will be configured to allow all
- *	rates based on negotiated supported rates information. This attribute
- *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
- *
- * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
- *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
- * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
- *	@NL80211_CMD_REGISTER_FRAME command.
- * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
- *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- *	information about which frame types can be transmitted with
- *	%NL80211_CMD_FRAME.
- * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
- *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- *	information about which frame types can be registered for RX.
- *
- * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
- *	acknowledged by the recipient.
- *
- * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
- *
- * @NL80211_ATTR_CQM: connection quality monitor configuration in a
- *	nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
- *
- * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
- *	is requesting a local authentication/association state change without
- *	invoking actual management frame exchange. This can be used with
- *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
- *	NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
- *	connected to this BSS.
- *
- * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
- *      &enum nl80211_tx_power_setting for possible values.
- * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
- *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
- *      for non-automatic settings.
- *
- * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
- *	means support for per-station GTKs.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
- *	This can be used to mask out antennas which are not attached or should
- *	not be used for transmitting. If an antenna is not selected in this
- *	bitmap the hardware is not allowed to transmit on this antenna.
- *
- *	Each bit represents one antenna, starting with antenna 1 at the first
- *	bit. Depending on which antennas are selected in the bitmap, 802.11n
- *	drivers can derive which chainmasks to use (if all antennas belonging to
- *	a particular chain are disabled this chain should be disabled) and if
- *	a chain has diversity antennas wether diversity should be used or not.
- *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
- *	derived from the available chains after applying the antenna mask.
- *	Non-802.11n drivers can derive wether to use diversity or not.
- *	Drivers may reject configurations or RX/TX mask combinations they cannot
- *	support by returning -EINVAL.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
- *	This can be used to mask out antennas which are not attached or should
- *	not be used for receiving. If an antenna is not selected in this bitmap
- *	the hardware should not be configured to receive on this antenna.
- *	For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
- *	for configuration as TX antennas via the above parameters.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
- *	for configuration as RX antennas via the above parameters.
- *
- * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
- *
- * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
- *	transmitted on another channel when the channel given doesn't match
- *	the current channel. If the current channel doesn't match and this
- *	flag isn't set, the frame will be rejected. This is also used as an
- *	nl80211 capability flag.
- *
- * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
- *
- * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
- *	attributes, specifying what a key should be set as default as.
- *	See &enum nl80211_key_default_types.
- *
- * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
- *	changed once the mesh is active.
- * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
- *	containing attributes from &enum nl80211_meshconf_params.
- * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
- *	allows auth frames in a mesh to be passed to userspace for processing via
- *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
- * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
- *	defined in &enum nl80211_plink_state. Used when userspace is
- *	driving the peer link management state machine.
- *	@NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
- *
- * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
- *	capabilities, the supported WoWLAN triggers
- * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
- *	indicate which WoW triggers should be enabled. This is also
- *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
- *	triggers.
- *
- * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
- *	cycles, in msecs.
- *
- * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
- *	sets of attributes to match during scheduled scans.  Only BSSs
- *	that match any of the sets will be reported.  These are
- *	pass-thru filter rules.
- *	For a match to succeed, the BSS must match all attributes of a
- *	set.  Since not every hardware supports matching all types of
- *	attributes, there is no guarantee that the reported BSSs are
- *	fully complying with the match sets and userspace needs to be
- *	able to ignore them by itself.
- *	Thus, the implementation is somewhat hardware-dependent, but
- *	this is only an optimization and the userspace application
- *	needs to handle all the non-filtered results anyway.
- *	If the match attributes don't make sense when combined with
- *	the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
- *	is included in the probe request, but the match attributes
- *	will never let it go through), -EINVAL may be returned.
- *	If ommited, no filtering is done.
- *
- * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
- *	interface combinations. In each nested item, it contains attributes
- *	defined in &enum nl80211_if_combination_attrs.
- * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
- *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
- *	are managed in software: interfaces of these types aren't subject to
- *	any restrictions in their number or combinations.
- *
- * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
- *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
- *
- * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
- *	nested array attribute containing an entry for each band, with the entry
- *	being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
- *	without the length restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
- *	and Probe Response (when response to wildcard Probe Request); see
- *	&enum nl80211_hidden_ssid, represented as a u32
- *
- * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
- *	This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
- *	provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
- *	driver (or firmware) replies to Probe Request frames.
- * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
- *	Response frames. This is used with %NL80211_CMD_NEW_BEACON and
- *	%NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
- *	(Re)Association Response frames when the driver (or firmware) replies to
- *	(Re)Association Request frames.
- *
- * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
- *	of the station, see &enum nl80211_sta_wme_attr.
- * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
- *	as AP.
- *
- * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
- *	roaming to another AP in the same ESS if the signal lever is low.
- *
- * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
- *	candidate information, see &enum nl80211_pmksa_candidate_attr.
- *
- * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
- *	for management frames transmission. In order to avoid p2p probe/action
- *	frames are being transmitted at CCK rate in 2GHz band, the user space
- *	applications use this attribute.
- *	This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
- *	%NL80211_CMD_FRAME commands.
- *
- * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
- *	request, link setup confirm, link teardown, etc.). Values are
- *	described in the TDLS (802.11z) specification.
- * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
- *	TDLS conversation between two devices.
- * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
- *	&enum nl80211_tdls_operation, represented as a u8.
- * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
- *	as a TDLS peer sta.
- * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
- *	procedures should be performed by sending TDLS packets via
- *	%NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
- *	used for asking the driver to perform a TDLS operation.
- *
- * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
- *	that have AP support to indicate that they have the AP SME integrated
- *	with support for the features listed in this attribute, see
- *	&enum nl80211_ap_sme_features.
- *
- * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
- *	the driver to not wait for an acknowledgement. Note that due to this,
- *	it will also not give a status callback nor return a cookie. This is
- *	mostly useful for probe responses to save airtime.
- *
- * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
- *	&enum nl80211_feature_flags and is advertised in wiphy information.
- * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
- *	requests while operating in AP-mode.
- *	This attribute holds a bitmap of the supported protocols for
- *	offloading (see &enum nl80211_probe_resp_offload_support_attr).
- *
- * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
- *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
- *	to be filled by the FW.
- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
- *      this feature.  Currently, only supported in mac80211 drivers.
- * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
- *      ATTR_HT_CAPABILITY to which attention should be paid.
- *      Currently, only mac80211 NICs support this feature.
- *      The values that may be configured are:
- *       MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
- *       AMPDU density and AMPDU factor.
- *      All values are treated as suggestions and may be ignored
- *      by the driver as required.  The actual values may be seen in
- *      the station debugfs ht_caps file.
- *
- * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
- *    abides to when initiating radiation on DFS channels. A country maps
- *    to one DFS region.
- *
- * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
- *      up to 16 TIDs.
- *
- * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
- *	used by the drivers which has MLME in firmware and does not have support
- *	to report per station tx/rx activity to free up the staion entry from
- *	the list. This needs to be used when the driver advertises the
- *	capability to timeout the stations.
- *
- * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
- *	this attribute is (depending on the driver capabilities) added to
- *	received frames indicated with %NL80211_CMD_FRAME.
- *
- * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
- *      or 0 to disable background scan.
- *
- * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from
- *	userspace. If unset it is assumed the hint comes directly from
- *	a user. If set code could specify exactly what type of source
- *	was used to provide the hint. For the different types of
- *	allowed user regulatory hints see nl80211_user_reg_hint_type.
- *
- * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected
- *	the connection request from a station. nl80211_connect_failed_reason
- *	enum has different reasons of connection failure.
- *
- * @NL80211_ATTR_MAX: highest attribute number currently defined
- * @__NL80211_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_attrs {
-/* don't change the order or add anything between, this is ABI! */
-	NL80211_ATTR_UNSPEC,
-
-	NL80211_ATTR_WIPHY,
-	NL80211_ATTR_WIPHY_NAME,
-
-	NL80211_ATTR_IFINDEX,
-	NL80211_ATTR_IFNAME,
-	NL80211_ATTR_IFTYPE,
-
-	NL80211_ATTR_MAC,
-
-	NL80211_ATTR_KEY_DATA,
-	NL80211_ATTR_KEY_IDX,
-	NL80211_ATTR_KEY_CIPHER,
-	NL80211_ATTR_KEY_SEQ,
-	NL80211_ATTR_KEY_DEFAULT,
-
-	NL80211_ATTR_BEACON_INTERVAL,
-	NL80211_ATTR_DTIM_PERIOD,
-	NL80211_ATTR_BEACON_HEAD,
-	NL80211_ATTR_BEACON_TAIL,
-
-	NL80211_ATTR_STA_AID,
-	NL80211_ATTR_STA_FLAGS,
-	NL80211_ATTR_STA_LISTEN_INTERVAL,
-	NL80211_ATTR_STA_SUPPORTED_RATES,
-	NL80211_ATTR_STA_VLAN,
-	NL80211_ATTR_STA_INFO,
-
-	NL80211_ATTR_WIPHY_BANDS,
-
-	NL80211_ATTR_MNTR_FLAGS,
-
-	NL80211_ATTR_MESH_ID,
-	NL80211_ATTR_STA_PLINK_ACTION,
-	NL80211_ATTR_MPATH_NEXT_HOP,
-	NL80211_ATTR_MPATH_INFO,
-
-	NL80211_ATTR_BSS_CTS_PROT,
-	NL80211_ATTR_BSS_SHORT_PREAMBLE,
-	NL80211_ATTR_BSS_SHORT_SLOT_TIME,
-
-	NL80211_ATTR_HT_CAPABILITY,
-
-	NL80211_ATTR_SUPPORTED_IFTYPES,
-
-	NL80211_ATTR_REG_ALPHA2,
-	NL80211_ATTR_REG_RULES,
-
-	NL80211_ATTR_MESH_CONFIG,
-
-	NL80211_ATTR_BSS_BASIC_RATES,
-
-	NL80211_ATTR_WIPHY_TXQ_PARAMS,
-	NL80211_ATTR_WIPHY_FREQ,
-	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
-
-	NL80211_ATTR_KEY_DEFAULT_MGMT,
-
-	NL80211_ATTR_MGMT_SUBTYPE,
-	NL80211_ATTR_IE,
-
-	NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
-
-	NL80211_ATTR_SCAN_FREQUENCIES,
-	NL80211_ATTR_SCAN_SSIDS,
-	NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
-	NL80211_ATTR_BSS,
-
-	NL80211_ATTR_REG_INITIATOR,
-	NL80211_ATTR_REG_TYPE,
-
-	NL80211_ATTR_SUPPORTED_COMMANDS,
-
-	NL80211_ATTR_FRAME,
-	NL80211_ATTR_SSID,
-	NL80211_ATTR_AUTH_TYPE,
-	NL80211_ATTR_REASON_CODE,
-
-	NL80211_ATTR_KEY_TYPE,
-
-	NL80211_ATTR_MAX_SCAN_IE_LEN,
-	NL80211_ATTR_CIPHER_SUITES,
-
-	NL80211_ATTR_FREQ_BEFORE,
-	NL80211_ATTR_FREQ_AFTER,
-
-	NL80211_ATTR_FREQ_FIXED,
-
-
-	NL80211_ATTR_WIPHY_RETRY_SHORT,
-	NL80211_ATTR_WIPHY_RETRY_LONG,
-	NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
-	NL80211_ATTR_WIPHY_RTS_THRESHOLD,
-
-	NL80211_ATTR_TIMED_OUT,
-
-	NL80211_ATTR_USE_MFP,
-
-	NL80211_ATTR_STA_FLAGS2,
-
-	NL80211_ATTR_CONTROL_PORT,
-
-	NL80211_ATTR_TESTDATA,
-
-	NL80211_ATTR_PRIVACY,
-
-	NL80211_ATTR_DISCONNECTED_BY_AP,
-	NL80211_ATTR_STATUS_CODE,
-
-	NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
-	NL80211_ATTR_CIPHER_SUITE_GROUP,
-	NL80211_ATTR_WPA_VERSIONS,
-	NL80211_ATTR_AKM_SUITES,
-
-	NL80211_ATTR_REQ_IE,
-	NL80211_ATTR_RESP_IE,
-
-	NL80211_ATTR_PREV_BSSID,
-
-	NL80211_ATTR_KEY,
-	NL80211_ATTR_KEYS,
-
-	NL80211_ATTR_PID,
-
-	NL80211_ATTR_4ADDR,
-
-	NL80211_ATTR_SURVEY_INFO,
-
-	NL80211_ATTR_PMKID,
-	NL80211_ATTR_MAX_NUM_PMKIDS,
-
-	NL80211_ATTR_DURATION,
-
-	NL80211_ATTR_COOKIE,
-
-	NL80211_ATTR_WIPHY_COVERAGE_CLASS,
-
-	NL80211_ATTR_TX_RATES,
-
-	NL80211_ATTR_FRAME_MATCH,
-
-	NL80211_ATTR_ACK,
-
-	NL80211_ATTR_PS_STATE,
-
-	NL80211_ATTR_CQM,
-
-	NL80211_ATTR_LOCAL_STATE_CHANGE,
-
-	NL80211_ATTR_AP_ISOLATE,
-
-	NL80211_ATTR_WIPHY_TX_POWER_SETTING,
-	NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
-
-	NL80211_ATTR_TX_FRAME_TYPES,
-	NL80211_ATTR_RX_FRAME_TYPES,
-	NL80211_ATTR_FRAME_TYPE,
-
-	NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
-	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
-
-	NL80211_ATTR_SUPPORT_IBSS_RSN,
-
-	NL80211_ATTR_WIPHY_ANTENNA_TX,
-	NL80211_ATTR_WIPHY_ANTENNA_RX,
-
-	NL80211_ATTR_MCAST_RATE,
-
-	NL80211_ATTR_OFFCHANNEL_TX_OK,
-
-	NL80211_ATTR_BSS_HT_OPMODE,
-
-	NL80211_ATTR_KEY_DEFAULT_TYPES,
-
-	NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
-
-	NL80211_ATTR_MESH_SETUP,
-
-	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
-	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
-
-	NL80211_ATTR_SUPPORT_MESH_AUTH,
-	NL80211_ATTR_STA_PLINK_STATE,
-
-	NL80211_ATTR_WOWLAN_TRIGGERS,
-	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
-
-	NL80211_ATTR_SCHED_SCAN_INTERVAL,
-
-	NL80211_ATTR_INTERFACE_COMBINATIONS,
-	NL80211_ATTR_SOFTWARE_IFTYPES,
-
-	NL80211_ATTR_REKEY_DATA,
-
-	NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
-	NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
-
-	NL80211_ATTR_SCAN_SUPP_RATES,
-
-	NL80211_ATTR_HIDDEN_SSID,
-
-	NL80211_ATTR_IE_PROBE_RESP,
-	NL80211_ATTR_IE_ASSOC_RESP,
-
-	NL80211_ATTR_STA_WME,
-	NL80211_ATTR_SUPPORT_AP_UAPSD,
-
-	NL80211_ATTR_ROAM_SUPPORT,
-
-	NL80211_ATTR_SCHED_SCAN_MATCH,
-	NL80211_ATTR_MAX_MATCH_SETS,
-
-	NL80211_ATTR_PMKSA_CANDIDATE,
-
-	NL80211_ATTR_TX_NO_CCK_RATE,
-
-	NL80211_ATTR_TDLS_ACTION,
-	NL80211_ATTR_TDLS_DIALOG_TOKEN,
-	NL80211_ATTR_TDLS_OPERATION,
-	NL80211_ATTR_TDLS_SUPPORT,
-	NL80211_ATTR_TDLS_EXTERNAL_SETUP,
-
-	NL80211_ATTR_DEVICE_AP_SME,
-
-	NL80211_ATTR_DONT_WAIT_FOR_ACK,
-
-	NL80211_ATTR_FEATURE_FLAGS,
-
-	NL80211_ATTR_PROBE_RESP_OFFLOAD,
-
-	NL80211_ATTR_PROBE_RESP,
-
-	NL80211_ATTR_DFS_REGION,
-
-	NL80211_ATTR_DISABLE_HT,
-	NL80211_ATTR_HT_CAPABILITY_MASK,
-
-	NL80211_ATTR_NOACK_MAP,
-
-	NL80211_ATTR_INACTIVITY_TIMEOUT,
-
-	NL80211_ATTR_RX_SIGNAL_DBM,
-
-	NL80211_ATTR_BG_SCAN_PERIOD,
-
-	NL80211_ATTR_WDEV,
-
-	NL80211_ATTR_USER_REG_HINT_TYPE,
-
-	NL80211_ATTR_CONN_FAILED_REASON,
-
-	/* add attributes here, update the policy in nl80211.c */
-
-	__NL80211_ATTR_AFTER_LAST,
-	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
-};
-
-/* source-level API compatibility */
-#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
-#define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
-
-/*
- * Allow user space programs to use #ifdef on new attributes by defining them
- * here
- */
-#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
-#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
-#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
-#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
-#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
-#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
-#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
-#define NL80211_ATTR_IE NL80211_ATTR_IE
-#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
-#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
-#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
-#define NL80211_ATTR_SSID NL80211_ATTR_SSID
-#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
-#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
-#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
-#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
-#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
-#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
-#define NL80211_ATTR_KEY NL80211_ATTR_KEY
-#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
-#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
-
-#define NL80211_MAX_SUPP_RATES			32
-#define NL80211_MAX_SUPP_HT_RATES		77
-#define NL80211_MAX_SUPP_REG_RULES		32
-#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
-#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
-#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
-#define NL80211_HT_CAPABILITY_LEN		26
-
-#define NL80211_MAX_NR_CIPHER_SUITES		5
-#define NL80211_MAX_NR_AKM_SUITES		2
-
-#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME	10
-
-/* default RSSI threshold for scan results if none specified. */
-#define NL80211_SCAN_RSSI_THOLD_OFF		-300
-
-#define NL80211_CQM_TXE_MAX_INTVL		1800
-
-/**
- * enum nl80211_iftype - (virtual) interface types
- *
- * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
- * @NL80211_IFTYPE_ADHOC: independent BSS member
- * @NL80211_IFTYPE_STATION: managed BSS member
- * @NL80211_IFTYPE_AP: access point
- * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
- *	are a bit special in that they must always be tied to a pre-existing
- *	AP type interface.
- * @NL80211_IFTYPE_WDS: wireless distribution interface
- * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
- * @NL80211_IFTYPE_MESH_POINT: mesh point
- * @NL80211_IFTYPE_P2P_CLIENT: P2P client
- * @NL80211_IFTYPE_P2P_GO: P2P group owner
- * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
- *	and therefore can't be created in the normal ways, use the
- *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
- *	commands to create and destroy one
- * @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @NUM_NL80211_IFTYPES: number of defined interface types
- *
- * These values are used with the %NL80211_ATTR_IFTYPE
- * to set the type of an interface.
- *
- */
-enum nl80211_iftype {
-	NL80211_IFTYPE_UNSPECIFIED,
-	NL80211_IFTYPE_ADHOC,
-	NL80211_IFTYPE_STATION,
-	NL80211_IFTYPE_AP,
-	NL80211_IFTYPE_AP_VLAN,
-	NL80211_IFTYPE_WDS,
-	NL80211_IFTYPE_MONITOR,
-	NL80211_IFTYPE_MESH_POINT,
-	NL80211_IFTYPE_P2P_CLIENT,
-	NL80211_IFTYPE_P2P_GO,
-	NL80211_IFTYPE_P2P_DEVICE,
-
-	/* keep last */
-	NUM_NL80211_IFTYPES,
-	NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
-};
-
-/**
- * enum nl80211_sta_flags - station flags
- *
- * Station flags. When a station is added to an AP interface, it is
- * assumed to be already associated (and hence authenticated.)
- *
- * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
- * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
- * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
- *	with short barker preamble
- * @NL80211_STA_FLAG_WME: station is WME/QoS capable
- * @NL80211_STA_FLAG_MFP: station uses management frame protection
- * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
- * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
- *	only be used in managed mode (even in the flags mask). Note that the
- *	flag can't be changed, it is only valid while adding a station, and
- *	attempts to change it will silently be ignored (rather than rejected
- *	as errors.)
- * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
- * @__NL80211_STA_FLAG_AFTER_LAST: internal use
- */
-enum nl80211_sta_flags {
-	__NL80211_STA_FLAG_INVALID,
-	NL80211_STA_FLAG_AUTHORIZED,
-	NL80211_STA_FLAG_SHORT_PREAMBLE,
-	NL80211_STA_FLAG_WME,
-	NL80211_STA_FLAG_MFP,
-	NL80211_STA_FLAG_AUTHENTICATED,
-	NL80211_STA_FLAG_TDLS_PEER,
-
-	/* keep last */
-	__NL80211_STA_FLAG_AFTER_LAST,
-	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
-};
-
-#define NL80211_STA_FLAG_MAX_OLD_API	NL80211_STA_FLAG_TDLS_PEER
-
-/**
- * struct nl80211_sta_flag_update - station flags mask/set
- * @mask: mask of station flags to set
- * @set: which values to set them to
- *
- * Both mask and set contain bits as per &enum nl80211_sta_flags.
- */
-struct nl80211_sta_flag_update {
-	__u32 mask;
-	__u32 set;
-} __attribute__((packed));
-
-/**
- * enum nl80211_rate_info - bitrate information
- *
- * These attribute types are used with %NL80211_STA_INFO_TXRATE
- * when getting information about the bitrate of a station.
- * There are 2 attributes for bitrate, a legacy one that represents
- * a 16-bit value, and new one that represents a 32-bit value.
- * If the rate value fits into 16 bit, both attributes are reported
- * with the same value. If the rate is too high to fit into 16 bits
- * (>6.5535Gbps) only 32-bit attribute is included.
- * User space tools encouraged to use the 32-bit attribute and fall
- * back to the 16-bit one for compatibility with older kernels.
- *
- * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
- * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
- * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
- * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
- * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
- * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
- * @__NL80211_RATE_INFO_AFTER_LAST: internal use
- */
-enum nl80211_rate_info {
-	__NL80211_RATE_INFO_INVALID,
-	NL80211_RATE_INFO_BITRATE,
-	NL80211_RATE_INFO_MCS,
-	NL80211_RATE_INFO_40_MHZ_WIDTH,
-	NL80211_RATE_INFO_SHORT_GI,
-	NL80211_RATE_INFO_BITRATE32,
-
-	/* keep last */
-	__NL80211_RATE_INFO_AFTER_LAST,
-	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_bss_param - BSS information collected by STA
- *
- * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
- * when getting information about the bitrate of a station.
- *
- * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
- * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
- * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled
- *	(flag)
- * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled
- *	(flag)
- * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
- * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
- * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
- * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
- */
-enum nl80211_sta_bss_param {
-	__NL80211_STA_BSS_PARAM_INVALID,
-	NL80211_STA_BSS_PARAM_CTS_PROT,
-	NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
-	NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
-	NL80211_STA_BSS_PARAM_DTIM_PERIOD,
-	NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
-
-	/* keep last */
-	__NL80211_STA_BSS_PARAM_AFTER_LAST,
-	NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_info - station information
- *
- * These attribute types are used with %NL80211_ATTR_STA_INFO
- * when getting information about a station.
- *
- * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
- * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * 	containing info as possible, see &enum nl80211_rate_info
- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
- *	station)
- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
- * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
- * @NL80211_STA_INFO_LLID: the station's mesh LLID
- * @NL80211_STA_INFO_PLID: the station's mesh PLID
- * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
- *	(see %enum nl80211_plink_state)
- * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
- *	attribute, like NL80211_STA_INFO_TX_BITRATE.
- * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
- *     containing info as possible, see &enum nl80211_sta_bss_param
- * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
- * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
- * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
- * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
- */
-enum nl80211_sta_info {
-	__NL80211_STA_INFO_INVALID,
-	NL80211_STA_INFO_INACTIVE_TIME,
-	NL80211_STA_INFO_RX_BYTES,
-	NL80211_STA_INFO_TX_BYTES,
-	NL80211_STA_INFO_LLID,
-	NL80211_STA_INFO_PLID,
-	NL80211_STA_INFO_PLINK_STATE,
-	NL80211_STA_INFO_SIGNAL,
-	NL80211_STA_INFO_TX_BITRATE,
-	NL80211_STA_INFO_RX_PACKETS,
-	NL80211_STA_INFO_TX_PACKETS,
-	NL80211_STA_INFO_TX_RETRIES,
-	NL80211_STA_INFO_TX_FAILED,
-	NL80211_STA_INFO_SIGNAL_AVG,
-	NL80211_STA_INFO_RX_BITRATE,
-	NL80211_STA_INFO_BSS_PARAM,
-	NL80211_STA_INFO_CONNECTED_TIME,
-	NL80211_STA_INFO_STA_FLAGS,
-	NL80211_STA_INFO_BEACON_LOSS,
-	NL80211_STA_INFO_T_OFFSET,
-
-	/* keep last */
-	__NL80211_STA_INFO_AFTER_LAST,
-	NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mpath_flags - nl80211 mesh path flags
- *
- * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
- * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
- * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
- * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
- * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
- */
-enum nl80211_mpath_flags {
-	NL80211_MPATH_FLAG_ACTIVE =	1<<0,
-	NL80211_MPATH_FLAG_RESOLVING =	1<<1,
-	NL80211_MPATH_FLAG_SN_VALID =	1<<2,
-	NL80211_MPATH_FLAG_FIXED =	1<<3,
-	NL80211_MPATH_FLAG_RESOLVED =	1<<4,
-};
-
-/**
- * enum nl80211_mpath_info - mesh path information
- *
- * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
- * information about a mesh path.
- *
- * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_MPATH_INFO_SN: destination sequence number
- * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
- * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
- * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * 	&enum nl80211_mpath_flags;
- * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
- * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
- * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
- *	currently defind
- * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
- */
-enum nl80211_mpath_info {
-	__NL80211_MPATH_INFO_INVALID,
-	NL80211_MPATH_INFO_FRAME_QLEN,
-	NL80211_MPATH_INFO_SN,
-	NL80211_MPATH_INFO_METRIC,
-	NL80211_MPATH_INFO_EXPTIME,
-	NL80211_MPATH_INFO_FLAGS,
-	NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
-	NL80211_MPATH_INFO_DISCOVERY_RETRIES,
-
-	/* keep last */
-	__NL80211_MPATH_INFO_AFTER_LAST,
-	NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_band_attr - band attributes
- * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
- *	an array of nested frequency attributes
- * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
- *	an array of nested bitrate attributes
- * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
- *	defined in 802.11n
- * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
- * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
- * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
- * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
- *	defined in 802.11ac
- * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
- * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
- * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_band_attr {
-	__NL80211_BAND_ATTR_INVALID,
-	NL80211_BAND_ATTR_FREQS,
-	NL80211_BAND_ATTR_RATES,
-
-	NL80211_BAND_ATTR_HT_MCS_SET,
-	NL80211_BAND_ATTR_HT_CAPA,
-	NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
-	NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
-
-	NL80211_BAND_ATTR_VHT_MCS_SET,
-	NL80211_BAND_ATTR_VHT_CAPA,
-
-	/* keep last */
-	__NL80211_BAND_ATTR_AFTER_LAST,
-	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
-};
-
-#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
-
-/**
- * enum nl80211_frequency_attr - frequency attributes
- * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
- * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
- *	regulatory domain.
- * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
- *	permitted on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
- *	on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
- *	on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
- *	(100 * dBm).
- * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
- *	currently defined
- * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_frequency_attr {
-	__NL80211_FREQUENCY_ATTR_INVALID,
-	NL80211_FREQUENCY_ATTR_FREQ,
-	NL80211_FREQUENCY_ATTR_DISABLED,
-	NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
-	NL80211_FREQUENCY_ATTR_NO_IBSS,
-	NL80211_FREQUENCY_ATTR_RADAR,
-	NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
-
-	/* keep last */
-	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
-	NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
-};
-
-#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
-
-/**
- * enum nl80211_bitrate_attr - bitrate attributes
- * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
- * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
- *	in 2.4 GHz band.
- * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
- *	currently defined
- * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_bitrate_attr {
-	__NL80211_BITRATE_ATTR_INVALID,
-	NL80211_BITRATE_ATTR_RATE,
-	NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
-
-	/* keep last */
-	__NL80211_BITRATE_ATTR_AFTER_LAST,
-	NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
- * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * 	regulatory domain.
- * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * 	regulatory domain.
- * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * 	wireless core it thinks its knows the regulatory domain we should be in.
- * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 	802.11 country information element with regulatory information it
- * 	thinks we should consider. cfg80211 only processes the country
- *	code from the IE, and relies on the regulatory domain information
- *	structure passed by userspace (CRDA) from our wireless-regdb.
- *	If a channel is enabled but the country code indicates it should
- *	be disabled we disable the channel and re-enable it upon disassociation.
- */
-enum nl80211_reg_initiator {
-	NL80211_REGDOM_SET_BY_CORE,
-	NL80211_REGDOM_SET_BY_USER,
-	NL80211_REGDOM_SET_BY_DRIVER,
-	NL80211_REGDOM_SET_BY_COUNTRY_IE,
-};
-
-/**
- * enum nl80211_reg_type - specifies the type of regulatory domain
- * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
- *	to a specific country. When this is set you can count on the
- *	ISO / IEC 3166 alpha2 country code being valid.
- * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * 	domain.
- * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * 	driver specific world regulatory domain. These do not apply system-wide
- * 	and are only applicable to the individual devices which have requested
- * 	them to be applied.
- * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
- *	of an intersection between two regulatory domains -- the previously
- *	set regulatory domain on the system and the last accepted regulatory
- *	domain request to be processed.
- */
-enum nl80211_reg_type {
-	NL80211_REGDOM_TYPE_COUNTRY,
-	NL80211_REGDOM_TYPE_WORLD,
-	NL80211_REGDOM_TYPE_CUSTOM_WORLD,
-	NL80211_REGDOM_TYPE_INTERSECTION,
-};
-
-/**
- * enum nl80211_reg_rule_attr - regulatory rule attributes
- * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * 	considerations for a given frequency range. These are the
- * 	&enum nl80211_reg_rule_flags.
- * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * 	rule in KHz. This is not a center of frequency but an actual regulatory
- * 	band edge.
- * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * 	in KHz. This is not a center a frequency but an actual regulatory
- * 	band edge.
- * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- * 	frequency range, in KHz.
- * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * 	for a given frequency range. The value is in mBi (100 * dBi).
- * 	If you don't have one then don't send this.
- * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * 	a given frequency range. The value is in mBm (100 * dBm).
- * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
- *	currently defined
- * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_reg_rule_attr {
-	__NL80211_REG_RULE_ATTR_INVALID,
-	NL80211_ATTR_REG_RULE_FLAGS,
-
-	NL80211_ATTR_FREQ_RANGE_START,
-	NL80211_ATTR_FREQ_RANGE_END,
-	NL80211_ATTR_FREQ_RANGE_MAX_BW,
-
-	NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
-	NL80211_ATTR_POWER_RULE_MAX_EIRP,
-
-	/* keep last */
-	__NL80211_REG_RULE_ATTR_AFTER_LAST,
-	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
- * only report BSS with matching SSID.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
- *	BSS in scan results. Filtering is turned off if not specified.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
- *	attribute number currently defined
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_sched_scan_match_attr {
-	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
-
-	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
-	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
-
-	/* keep last */
-	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
-	NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
-		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
-};
-
-/* only for backward compatibility */
-#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID
-
-/**
- * enum nl80211_reg_rule_flags - regulatory rule flags
- *
- * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
- * @NL80211_RRF_NO_CCK: CCK modulation not allowed
- * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
- * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
- * @NL80211_RRF_DFS: DFS support is required to be used
- * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
- * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
- * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
- * @NL80211_RRF_NO_IBSS: no IBSS is allowed
- */
-enum nl80211_reg_rule_flags {
-	NL80211_RRF_NO_OFDM		= 1<<0,
-	NL80211_RRF_NO_CCK		= 1<<1,
-	NL80211_RRF_NO_INDOOR		= 1<<2,
-	NL80211_RRF_NO_OUTDOOR		= 1<<3,
-	NL80211_RRF_DFS			= 1<<4,
-	NL80211_RRF_PTP_ONLY		= 1<<5,
-	NL80211_RRF_PTMP_ONLY		= 1<<6,
-	NL80211_RRF_PASSIVE_SCAN	= 1<<7,
-	NL80211_RRF_NO_IBSS		= 1<<8,
-};
-
-/**
- * enum nl80211_dfs_regions - regulatory DFS regions
- *
- * @NL80211_DFS_UNSET: Country has no DFS master region specified
- * @NL80211_DFS_FCC: Country follows DFS master rules from FCC
- * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI
- * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec
- */
-enum nl80211_dfs_regions {
-	NL80211_DFS_UNSET	= 0,
-	NL80211_DFS_FCC		= 1,
-	NL80211_DFS_ETSI	= 2,
-	NL80211_DFS_JP		= 3,
-};
-
-/**
- * enum nl80211_user_reg_hint_type - type of user regulatory hint
- *
- * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always
- *	assumed if the attribute is not set.
- * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular
- *	base station. Device drivers that have been tested to work
- *	properly to support this type of hint can enable these hints
- *	by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature
- *	capability on the struct wiphy. The wireless core will
- *	ignore all cell base station hints until at least one device
- *	present has been registered with the wireless core that
- *	has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
- *	supported feature.
- */
-enum nl80211_user_reg_hint_type {
-	NL80211_USER_REG_HINT_USER	= 0,
-	NL80211_USER_REG_HINT_CELL_BASE = 1,
-};
-
-/**
- * enum nl80211_survey_info - survey information
- *
- * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
- * when getting information about a survey.
- *
- * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
- * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
- * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
- *	spent on this channel
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
- *	channel was sensed busy (either due to activity or energy detect)
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
- *	channel was sensed busy
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
- *	receiving data
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
- *	transmitting data
- * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
- *	currently defined
- * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
- */
-enum nl80211_survey_info {
-	__NL80211_SURVEY_INFO_INVALID,
-	NL80211_SURVEY_INFO_FREQUENCY,
-	NL80211_SURVEY_INFO_NOISE,
-	NL80211_SURVEY_INFO_IN_USE,
-	NL80211_SURVEY_INFO_CHANNEL_TIME,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
-
-	/* keep last */
-	__NL80211_SURVEY_INFO_AFTER_LAST,
-	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mntr_flags - monitor configuration flags
- *
- * Monitor configuration flags.
- *
- * @__NL80211_MNTR_FLAG_INVALID: reserved
- *
- * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
- * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
- * @NL80211_MNTR_FLAG_CONTROL: pass control frames
- * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
- * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
- *	overrides all other flags.
- *
- * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
- * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
- */
-enum nl80211_mntr_flags {
-	__NL80211_MNTR_FLAG_INVALID,
-	NL80211_MNTR_FLAG_FCSFAIL,
-	NL80211_MNTR_FLAG_PLCPFAIL,
-	NL80211_MNTR_FLAG_CONTROL,
-	NL80211_MNTR_FLAG_OTHER_BSS,
-	NL80211_MNTR_FLAG_COOK_FRAMES,
-
-	/* keep last */
-	__NL80211_MNTR_FLAG_AFTER_LAST,
-	NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_meshconf_params - mesh configuration parameters
- *
- * Mesh configuration parameters. These can be changed while the mesh is
- * active.
- *
- * @__NL80211_MESHCONF_INVALID: internal use
- *
- * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
- *	millisecond units, used by the Peer Link Open message
- *
- * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
- *	millisecond units, used by the peer link management to close a peer link
- *
- * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
- *	millisecond units
- *
- * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
- *	on this mesh interface
- *
- * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
- *	open retries that can be sent to establish a new peer link instance in a
- *	mesh
- *
- * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
- *	point.
- *
- * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
- *	open peer links when we detect compatible mesh peers.
- *
- * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
- *	containing a PREQ that an MP can send to a particular destination (path
- *	target)
- *
- * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
- *	(in milliseconds)
- *
- * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
- *	until giving up on a path discovery (in milliseconds)
- *
- * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
- *	points receiving a PREQ shall consider the forwarding information from
- *	the root to be valid. (TU = time unit)
- *
- * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
- *	TUs) during which an MP can send only one action frame containing a PREQ
- *	reference element
- *
- * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
- *	that it takes for an HWMP information element to propagate across the
- *	mesh
- *
- * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
- *
- * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
- *	source mesh point for path selection elements.
- *
- * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
- *	root announcements are transmitted.
- *
- * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
- *	access to a broader network beyond the MBSS.  This is done via Root
- *	Announcement frames.
- *
- * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
- *	TUs) during which a mesh STA can send only one Action frame containing a
- *	PERR element.
- *
- * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
- *	or forwarding entity (default is TRUE - forwarding entity)
- *
- * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
- *	threshold for average signal strength of candidate station to establish
- *	a peer link.
- *
- * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
- *	to synchronize to for 11s default synchronization method
- *	(see 11C.12.2.2)
- *
- * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
- *
- * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
- *
- * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for
- *	which mesh STAs receiving a proactive PREQ shall consider the forwarding
- *	information to the root mesh STA to be valid.
- *
- * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
- *	proactive PREQs are transmitted.
- *
- * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time
- *	(in TUs) during which a mesh STA can send only one Action frame
- *	containing a PREQ element for root path confirmation.
- *
- * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_meshconf_params {
-	__NL80211_MESHCONF_INVALID,
-	NL80211_MESHCONF_RETRY_TIMEOUT,
-	NL80211_MESHCONF_CONFIRM_TIMEOUT,
-	NL80211_MESHCONF_HOLDING_TIMEOUT,
-	NL80211_MESHCONF_MAX_PEER_LINKS,
-	NL80211_MESHCONF_MAX_RETRIES,
-	NL80211_MESHCONF_TTL,
-	NL80211_MESHCONF_AUTO_OPEN_PLINKS,
-	NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
-	NL80211_MESHCONF_PATH_REFRESH_TIME,
-	NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
-	NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
-	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
-	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
-	NL80211_MESHCONF_HWMP_ROOTMODE,
-	NL80211_MESHCONF_ELEMENT_TTL,
-	NL80211_MESHCONF_HWMP_RANN_INTERVAL,
-	NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
-	NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
-	NL80211_MESHCONF_FORWARDING,
-	NL80211_MESHCONF_RSSI_THRESHOLD,
-	NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
-	NL80211_MESHCONF_HT_OPMODE,
-	NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
-	NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
-	NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
-
-	/* keep last */
-	__NL80211_MESHCONF_ATTR_AFTER_LAST,
-	NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mesh_setup_params - mesh setup parameters
- *
- * Mesh setup parameters.  These are used to start/join a mesh and cannot be
- * changed while the mesh is active.
- *
- * @__NL80211_MESH_SETUP_INVALID: Internal use
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
- *	vendor specific path selection algorithm or disable it to use the
- *	default HWMP.
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
- *	vendor specific path metric or disable it to use the default Airtime
- *	metric.
- *
- * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
- *	robust security network ie, or a vendor specific information element
- *	that vendors will use to identify the path selection methods and
- *	metrics in use.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
- *	daemon will be authenticating mesh candidates.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
- *	daemon will be securing peer link frames.  AMPE is a secured version of
- *	Mesh Peering Management (MPM) and is implemented with the assistance of
- *	a userspace daemon.  When this flag is set, the kernel will send peer
- *	management frames to a userspace daemon that will implement AMPE
- *	functionality (security capabilities selection, key confirmation, and
- *	key management).  When the flag is unset (default), the kernel can
- *	autonomously complete (unsecured) mesh peering without the need of a
- *	userspace daemon.
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
- *	vendor specific synchronization method or disable it to use the default
- *	neighbor offset synchronization
- *
- * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
- *
- * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
- */
-enum nl80211_mesh_setup_params {
-	__NL80211_MESH_SETUP_INVALID,
-	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
-	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
-	NL80211_MESH_SETUP_IE,
-	NL80211_MESH_SETUP_USERSPACE_AUTH,
-	NL80211_MESH_SETUP_USERSPACE_AMPE,
-	NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
-
-	/* keep last */
-	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
-	NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_txq_attr - TX queue parameter attributes
- * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
- * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
- * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
- *	disabled
- * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
- *	2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
- *	2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
- * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
- * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
- */
-enum nl80211_txq_attr {
-	__NL80211_TXQ_ATTR_INVALID,
-	NL80211_TXQ_ATTR_AC,
-	NL80211_TXQ_ATTR_TXOP,
-	NL80211_TXQ_ATTR_CWMIN,
-	NL80211_TXQ_ATTR_CWMAX,
-	NL80211_TXQ_ATTR_AIFS,
-
-	/* keep last */
-	__NL80211_TXQ_ATTR_AFTER_LAST,
-	NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
-};
-
-enum nl80211_ac {
-	NL80211_AC_VO,
-	NL80211_AC_VI,
-	NL80211_AC_BE,
-	NL80211_AC_BK,
-	NL80211_NUM_ACS
-};
-
-/* backward compat */
-#define NL80211_TXQ_ATTR_QUEUE	NL80211_TXQ_ATTR_AC
-#define NL80211_TXQ_Q_VO	NL80211_AC_VO
-#define NL80211_TXQ_Q_VI	NL80211_AC_VI
-#define NL80211_TXQ_Q_BE	NL80211_AC_BE
-#define NL80211_TXQ_Q_BK	NL80211_AC_BK
-
-enum nl80211_channel_type {
-	NL80211_CHAN_NO_HT,
-	NL80211_CHAN_HT20,
-	NL80211_CHAN_HT40MINUS,
-	NL80211_CHAN_HT40PLUS
-};
-
-/**
- * enum nl80211_bss - netlink attributes for a BSS
- *
- * @__NL80211_BSS_INVALID: invalid
- * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
- * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
- * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
- * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
- * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
- * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
- *	raw information elements from the probe response/beacon (bin);
- *	if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
- *	from a Probe Response frame; otherwise they are from a Beacon frame.
- *	However, if the driver does not indicate the source of the IEs, these
- *	IEs may be from either frame subtype.
- * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
- *	in mBm (100 * dBm) (s32)
- * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
- *	in unspecified units, scaled to 0..100 (u8)
- * @NL80211_BSS_STATUS: status, if this BSS is "used"
- * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
- * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
- *	elements from a Beacon frame (bin); not present if no Beacon frame has
- *	yet been received
- * @__NL80211_BSS_AFTER_LAST: internal
- * @NL80211_BSS_MAX: highest BSS attribute
- */
-enum nl80211_bss {
-	__NL80211_BSS_INVALID,
-	NL80211_BSS_BSSID,
-	NL80211_BSS_FREQUENCY,
-	NL80211_BSS_TSF,
-	NL80211_BSS_BEACON_INTERVAL,
-	NL80211_BSS_CAPABILITY,
-	NL80211_BSS_INFORMATION_ELEMENTS,
-	NL80211_BSS_SIGNAL_MBM,
-	NL80211_BSS_SIGNAL_UNSPEC,
-	NL80211_BSS_STATUS,
-	NL80211_BSS_SEEN_MS_AGO,
-	NL80211_BSS_BEACON_IES,
-
-	/* keep last */
-	__NL80211_BSS_AFTER_LAST,
-	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_bss_status - BSS "status"
- * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
- * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
- * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
- *
- * The BSS status is a BSS attribute in scan dumps, which
- * indicates the status the interface has wrt. this BSS.
- */
-enum nl80211_bss_status {
-	NL80211_BSS_STATUS_AUTHENTICATED,
-	NL80211_BSS_STATUS_ASSOCIATED,
-	NL80211_BSS_STATUS_IBSS_JOINED,
-};
-
-/**
- * enum nl80211_auth_type - AuthenticationType
- *
- * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
- * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
- * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
- * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
- * @__NL80211_AUTHTYPE_NUM: internal
- * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
- * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
- *	trying multiple times); this is invalid in netlink -- leave out
- *	the attribute for this on CONNECT commands.
- */
-enum nl80211_auth_type {
-	NL80211_AUTHTYPE_OPEN_SYSTEM,
-	NL80211_AUTHTYPE_SHARED_KEY,
-	NL80211_AUTHTYPE_FT,
-	NL80211_AUTHTYPE_NETWORK_EAP,
-
-	/* keep last */
-	__NL80211_AUTHTYPE_NUM,
-	NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
-	NL80211_AUTHTYPE_AUTOMATIC
-};
-
-/**
- * enum nl80211_key_type - Key Type
- * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
- * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
- * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
- * @NUM_NL80211_KEYTYPES: number of defined key types
- */
-enum nl80211_key_type {
-	NL80211_KEYTYPE_GROUP,
-	NL80211_KEYTYPE_PAIRWISE,
-	NL80211_KEYTYPE_PEERKEY,
-
-	NUM_NL80211_KEYTYPES
-};
-
-/**
- * enum nl80211_mfp - Management frame protection state
- * @NL80211_MFP_NO: Management frame protection not used
- * @NL80211_MFP_REQUIRED: Management frame protection required
- */
-enum nl80211_mfp {
-	NL80211_MFP_NO,
-	NL80211_MFP_REQUIRED,
-};
-
-enum nl80211_wpa_versions {
-	NL80211_WPA_VERSION_1 = 1 << 0,
-	NL80211_WPA_VERSION_2 = 1 << 1,
-};
-
-/**
- * enum nl80211_key_default_types - key default types
- * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
- * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
- *	unicast key
- * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
- *	multicast key
- * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
- */
-enum nl80211_key_default_types {
-	__NL80211_KEY_DEFAULT_TYPE_INVALID,
-	NL80211_KEY_DEFAULT_TYPE_UNICAST,
-	NL80211_KEY_DEFAULT_TYPE_MULTICAST,
-
-	NUM_NL80211_KEY_DEFAULT_TYPES
-};
-
-/**
- * enum nl80211_key_attributes - key attributes
- * @__NL80211_KEY_INVALID: invalid
- * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
- *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- *	keys
- * @NL80211_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- *	section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- *	CCMP keys, each six bytes in little endian
- * @NL80211_KEY_DEFAULT: flag indicating default key
- * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
- * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
- *	specified the default depends on whether a MAC address was
- *	given with the command using the key or not (u32)
- * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
- *	attributes, specifying what a key should be set as default as.
- *	See &enum nl80211_key_default_types.
- * @__NL80211_KEY_AFTER_LAST: internal
- * @NL80211_KEY_MAX: highest key attribute
- */
-enum nl80211_key_attributes {
-	__NL80211_KEY_INVALID,
-	NL80211_KEY_DATA,
-	NL80211_KEY_IDX,
-	NL80211_KEY_CIPHER,
-	NL80211_KEY_SEQ,
-	NL80211_KEY_DEFAULT,
-	NL80211_KEY_DEFAULT_MGMT,
-	NL80211_KEY_TYPE,
-	NL80211_KEY_DEFAULT_TYPES,
-
-	/* keep last */
-	__NL80211_KEY_AFTER_LAST,
-	NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_tx_rate_attributes - TX rate set attributes
- * @__NL80211_TXRATE_INVALID: invalid
- * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
- *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
- *	1 = 500 kbps) but without the IE length restriction (at most
- *	%NL80211_MAX_SUPP_RATES in a single array).
- * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection
- *	in an array of MCS numbers.
- * @__NL80211_TXRATE_AFTER_LAST: internal
- * @NL80211_TXRATE_MAX: highest TX rate attribute
- */
-enum nl80211_tx_rate_attributes {
-	__NL80211_TXRATE_INVALID,
-	NL80211_TXRATE_LEGACY,
-	NL80211_TXRATE_MCS,
-
-	/* keep last */
-	__NL80211_TXRATE_AFTER_LAST,
-	NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_band - Frequency band
- * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
- * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
- * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
- */
-enum nl80211_band {
-	NL80211_BAND_2GHZ,
-	NL80211_BAND_5GHZ,
-	NL80211_BAND_60GHZ,
-};
-
-/**
- * enum nl80211_ps_state - powersave state
- * @NL80211_PS_DISABLED: powersave is disabled
- * @NL80211_PS_ENABLED: powersave is enabled
- */
-enum nl80211_ps_state {
-	NL80211_PS_DISABLED,
-	NL80211_PS_ENABLED,
-};
-
-/**
- * enum nl80211_attr_cqm - connection quality monitor attributes
- * @__NL80211_ATTR_CQM_INVALID: invalid
- * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
- *	the threshold for the RSSI level at which an event will be sent. Zero
- *	to disable.
- * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
- *	the minimum amount the RSSI level must change after an event before a
- *	new event may be issued (to reduce effects of RSSI oscillation).
- * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
- * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
- *	consecutive packets were not acknowledged by the peer
- * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures
- *	during the given %NL80211_ATTR_CQM_TXE_INTVL before an
- *	%NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and
- *	%NL80211_ATTR_CQM_TXE_PKTS is generated.
- * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given
- *	%NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is
- *	checked.
- * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic
- *	interval in which %NL80211_ATTR_CQM_TXE_PKTS and
- *	%NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
- *	%NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
- * @__NL80211_ATTR_CQM_AFTER_LAST: internal
- * @NL80211_ATTR_CQM_MAX: highest key attribute
- */
-enum nl80211_attr_cqm {
-	__NL80211_ATTR_CQM_INVALID,
-	NL80211_ATTR_CQM_RSSI_THOLD,
-	NL80211_ATTR_CQM_RSSI_HYST,
-	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
-	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
-	NL80211_ATTR_CQM_TXE_RATE,
-	NL80211_ATTR_CQM_TXE_PKTS,
-	NL80211_ATTR_CQM_TXE_INTVL,
-
-	/* keep last */
-	__NL80211_ATTR_CQM_AFTER_LAST,
-	NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
- *      configured threshold
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
- *      configured threshold
- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss.
- *	(Note that deauth/disassoc will still follow if the AP is not
- *	available. This event might get used as roaming event, etc.)
- */
-enum nl80211_cqm_rssi_threshold_event {
-	NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
-	NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
-	NL80211_CQM_RSSI_BEACON_LOSS_EVENT,
-};
-
-
-/**
- * enum nl80211_tx_power_setting - TX power adjustment
- * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
- * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
- * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
- */
-enum nl80211_tx_power_setting {
-	NL80211_TX_POWER_AUTOMATIC,
-	NL80211_TX_POWER_LIMITED,
-	NL80211_TX_POWER_FIXED,
-};
-
-/**
- * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
- * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
- * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
- *	a zero bit are ignored
- * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
- *	a bit for each byte in the pattern. The lowest-order bit corresponds
- *	to the first byte of the pattern, but the bytes of the pattern are
- *	in a little-endian-like format, i.e. the 9th byte of the pattern
- *	corresponds to the lowest-order bit in the second byte of the mask.
- *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
- *	xx indicates "don't care") would be represented by a pattern of
- *	twelve zero bytes, and a mask of "0xed,0x07".
- *	Note that the pattern matching is done as though frames were not
- *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
- *	first (including SNAP header unpacking) and then matched.
- * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
- * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
- */
-enum nl80211_wowlan_packet_pattern_attr {
-	__NL80211_WOWLAN_PKTPAT_INVALID,
-	NL80211_WOWLAN_PKTPAT_MASK,
-	NL80211_WOWLAN_PKTPAT_PATTERN,
-
-	NUM_NL80211_WOWLAN_PKTPAT,
-	MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
-};
-
-/**
- * struct nl80211_wowlan_pattern_support - pattern support information
- * @max_patterns: maximum number of patterns supported
- * @min_pattern_len: minimum length of each pattern
- * @max_pattern_len: maximum length of each pattern
- *
- * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
- * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
- * capability information given by the kernel to userspace.
- */
-struct nl80211_wowlan_pattern_support {
-	__u32 max_patterns;
-	__u32 min_pattern_len;
-	__u32 max_pattern_len;
-} __attribute__((packed));
-
-/**
- * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
- * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
- * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
- *	the chip into a special state -- works best with chips that have
- *	support for low-power operation already (flag)
- * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
- *	is detected is implementation-specific (flag)
- * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
- *	by 16 repetitions of MAC addr, anywhere in payload) (flag)
- * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
- *	which are passed in an array of nested attributes, each nested attribute
- *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
- *	Each pattern defines a wakeup packet. The matching is done on the MSDU,
- *	i.e. as though the packet was an 802.3 packet, so the pattern matching
- *	is done after the packet is converted to the MSDU.
- *
- *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
- *	carrying a &struct nl80211_wowlan_pattern_support.
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
- *	used when setting, used only to indicate that GTK rekeying is supported
- *	by the device (flag)
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
- *	done by the device) (flag)
- * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
- *	packet (flag)
- * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
- * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
- *	(on devices that have rfkill in the device) (flag)
- * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
- * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
- */
-enum nl80211_wowlan_triggers {
-	__NL80211_WOWLAN_TRIG_INVALID,
-	NL80211_WOWLAN_TRIG_ANY,
-	NL80211_WOWLAN_TRIG_DISCONNECT,
-	NL80211_WOWLAN_TRIG_MAGIC_PKT,
-	NL80211_WOWLAN_TRIG_PKT_PATTERN,
-	NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
-	NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
-	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
-	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
-	NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
-
-	/* keep last */
-	NUM_NL80211_WOWLAN_TRIG,
-	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
-};
-
-/**
- * enum nl80211_iface_limit_attrs - limit attributes
- * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
- * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
- *	can be chosen from this set of interface types (u32)
- * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
- *	flag attribute for each interface type in this set
- * @NUM_NL80211_IFACE_LIMIT: number of attributes
- * @MAX_NL80211_IFACE_LIMIT: highest attribute number
- */
-enum nl80211_iface_limit_attrs {
-	NL80211_IFACE_LIMIT_UNSPEC,
-	NL80211_IFACE_LIMIT_MAX,
-	NL80211_IFACE_LIMIT_TYPES,
-
-	/* keep last */
-	NUM_NL80211_IFACE_LIMIT,
-	MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
-};
-
-/**
- * enum nl80211_if_combination_attrs -- interface combination attributes
- *
- * @NL80211_IFACE_COMB_UNSPEC: (reserved)
- * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
- *	for given interface types, see &enum nl80211_iface_limit_attrs.
- * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
- *	interfaces that can be created in this group. This number doesn't
- *	apply to interfaces purely managed in software, which are listed
- *	in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
- * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
- *	beacon intervals within this group must be all the same even for
- *	infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
- *	the infrastructure network's beacon interval.
- * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
- *	different channels may be used within this group.
- * @NUM_NL80211_IFACE_COMB: number of attributes
- * @MAX_NL80211_IFACE_COMB: highest attribute number
- *
- * Examples:
- *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
- *	=> allows an AP and a STA that must match BIs
- *
- *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
- *	=> allows 8 of AP/GO
- *
- *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
- *	=> allows two STAs on different channels
- *
- *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
- *	=> allows a STA plus three P2P interfaces
- *
- * The list of these four possiblities could completely be contained
- * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
- * that any of these groups must match.
- *
- * "Combinations" of just a single interface will not be listed here,
- * a single interface of any valid interface type is assumed to always
- * be possible by itself. This means that implicitly, for each valid
- * interface type, the following group always exists:
- *	numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
- */
-enum nl80211_if_combination_attrs {
-	NL80211_IFACE_COMB_UNSPEC,
-	NL80211_IFACE_COMB_LIMITS,
-	NL80211_IFACE_COMB_MAXNUM,
-	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
-	NL80211_IFACE_COMB_NUM_CHANNELS,
-
-	/* keep last */
-	NUM_NL80211_IFACE_COMB,
-	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
-};
-
-
-/**
- * enum nl80211_plink_state - state of a mesh peer link finite state machine
- *
- * @NL80211_PLINK_LISTEN: initial state, considered the implicit
- *	state of non existant mesh peer links
- * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
- *	this mesh peer
- * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
- *	from this mesh peer
- * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
- *	received from this mesh peer
- * @NL80211_PLINK_ESTAB: mesh peer link is established
- * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
- * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
- *	plink are discarded
- * @NUM_NL80211_PLINK_STATES: number of peer link states
- * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
- */
-enum nl80211_plink_state {
-	NL80211_PLINK_LISTEN,
-	NL80211_PLINK_OPN_SNT,
-	NL80211_PLINK_OPN_RCVD,
-	NL80211_PLINK_CNF_RCVD,
-	NL80211_PLINK_ESTAB,
-	NL80211_PLINK_HOLDING,
-	NL80211_PLINK_BLOCKED,
-
-	/* keep last */
-	NUM_NL80211_PLINK_STATES,
-	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
-};
-
-#define NL80211_KCK_LEN			16
-#define NL80211_KEK_LEN			16
-#define NL80211_REPLAY_CTR_LEN		8
-
-/**
- * enum nl80211_rekey_data - attributes for GTK rekey offload
- * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
- * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
- * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
- * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
- * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
- * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
- */
-enum nl80211_rekey_data {
-	__NL80211_REKEY_DATA_INVALID,
-	NL80211_REKEY_DATA_KEK,
-	NL80211_REKEY_DATA_KCK,
-	NL80211_REKEY_DATA_REPLAY_CTR,
-
-	/* keep last */
-	NUM_NL80211_REKEY_DATA,
-	MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
-};
-
-/**
- * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
- * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
- *	Beacon frames)
- * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
- *	in Beacon frames
- * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
- *	element in Beacon frames but zero out each byte in the SSID
- */
-enum nl80211_hidden_ssid {
-	NL80211_HIDDEN_SSID_NOT_IN_USE,
-	NL80211_HIDDEN_SSID_ZERO_LEN,
-	NL80211_HIDDEN_SSID_ZERO_CONTENTS
-};
-
-/**
- * enum nl80211_sta_wme_attr - station WME attributes
- * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
- * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
- *	is the same as the AC bitmap in the QoS info field.
- * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
- *	as the MAX_SP field in the QoS info field (but already shifted down).
- * @__NL80211_STA_WME_AFTER_LAST: internal
- * @NL80211_STA_WME_MAX: highest station WME attribute
- */
-enum nl80211_sta_wme_attr {
-	__NL80211_STA_WME_INVALID,
-	NL80211_STA_WME_UAPSD_QUEUES,
-	NL80211_STA_WME_MAX_SP,
-
-	/* keep last */
-	__NL80211_STA_WME_AFTER_LAST,
-	NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
- * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
- * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
- *	priority)
- * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
- * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
- * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
- *	(internal)
- * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
- *	(internal)
- */
-enum nl80211_pmksa_candidate_attr {
-	__NL80211_PMKSA_CANDIDATE_INVALID,
-	NL80211_PMKSA_CANDIDATE_INDEX,
-	NL80211_PMKSA_CANDIDATE_BSSID,
-	NL80211_PMKSA_CANDIDATE_PREAUTH,
-
-	/* keep last */
-	NUM_NL80211_PMKSA_CANDIDATE,
-	MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
-};
-
-/**
- * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
- * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
- * @NL80211_TDLS_SETUP: Setup TDLS link
- * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
- * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
- * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
- */
-enum nl80211_tdls_operation {
-	NL80211_TDLS_DISCOVERY_REQ,
-	NL80211_TDLS_SETUP,
-	NL80211_TDLS_TEARDOWN,
-	NL80211_TDLS_ENABLE_LINK,
-	NL80211_TDLS_DISABLE_LINK,
-};
-
-/*
- * enum nl80211_ap_sme_features - device-integrated AP features
- * Reserved for future use, no bits are defined in
- * NL80211_ATTR_DEVICE_AP_SME yet.
-enum nl80211_ap_sme_features {
-};
- */
-
-/**
- * enum nl80211_feature_flags - device/driver features
- * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
- *	TX status to the socket error queue when requested with the
- *	socket option.
- * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
- * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
- *	the connected inactive stations in AP mode.
- * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
- *	to work properly to suppport receiving regulatory hints from
- *	cellular base stations.
- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
- *	P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
- *	in the interface combinations, even when it's only used for scan
- *	and remain-on-channel. This could be due to, for example, the
- *	remain-on-channel implementation requiring a channel context.
- */
-enum nl80211_feature_flags {
-	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
-	NL80211_FEATURE_HT_IBSS				= 1 << 1,
-	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
-	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
-	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
-};
-
-/**
- * enum nl80211_probe_resp_offload_support_attr - optional supported
- *	protocols for probe-response offloading by the driver/FW.
- *	To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
- *	Each enum value represents a bit in the bitmap of supported
- *	protocols. Typically a subset of probe-requests belonging to a
- *	supported protocol will be excluded from offload and uploaded
- *	to the host.
- *
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
- */
-enum nl80211_probe_resp_offload_support_attr {
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =	1<<0,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =	1<<1,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =	1<<2,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =	1<<3,
-};
-
-/**
- * enum nl80211_connect_failed_reason - connection request failed reasons
- * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
- *	handled by the AP is reached.
- * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist.
- */
-enum nl80211_connect_failed_reason {
-	NL80211_CONN_FAIL_MAX_CLIENTS,
-	NL80211_CONN_FAIL_BLOCKED_CLIENT,
-};
-
-#endif /* __LINUX_NL80211_H */
diff --git a/include/linux/nubus.h b/include/linux/nubus.h
index e137b3c486a7..a8696bbdfbc4 100644
--- a/include/linux/nubus.h
+++ b/include/linux/nubus.h
@@ -8,236 +8,12 @@
   Some of the constants in here are from the corresponding
   NetBSD/OpenBSD header file, by Allen Briggs.  We figured out the
   rest of them on our own. */
-
 #ifndef LINUX_NUBUS_H
 #define LINUX_NUBUS_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <asm/nubus.h>
-#endif
-
-enum nubus_category {
-	NUBUS_CAT_BOARD          = 0x0001,
-	NUBUS_CAT_DISPLAY        = 0x0003,
-	NUBUS_CAT_NETWORK        = 0x0004,
-	NUBUS_CAT_COMMUNICATIONS = 0x0006,
-	NUBUS_CAT_FONT           = 0x0009,
-	NUBUS_CAT_CPU            = 0x000A,
-	/* For lack of a better name */
-	NUBUS_CAT_DUODOCK        = 0x0020
-};
-
-enum nubus_type_network {
-	NUBUS_TYPE_ETHERNET      = 0x0001,
-	NUBUS_TYPE_RS232         = 0x0002
-};
-
-enum nubus_type_display {
-	NUBUS_TYPE_VIDEO         = 0x0001
-};
-
-enum nubus_type_cpu {
-	NUBUS_TYPE_68020         = 0x0003,
-	NUBUS_TYPE_68030         = 0x0004,
-	NUBUS_TYPE_68040         = 0x0005
-};
-
-/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
- *  68030 motherboards: <10,4,0,24>
- *  68040 motherboards: <10,5,0,24>
- *  DuoDock Plus: <32,1,1,2>
- *
- *  Toby Frame Buffer card: <3,1,1,1>
- *  RBV built-in video (IIci): <3,1,1,24>
- *  Valkyrie built-in video (Q630): <3,1,1,46>
- *  Macintosh Display Card: <3,1,1,25>
- *  Sonora built-in video (P460): <3,1,1,34>
- *  Jet framebuffer (DuoDock Plus): <3,1,1,41>
- *
- *  SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
- *  SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
- *  Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281>
- *  Sonic Systems Ethernet A-Series Card: <4,1,268,256>
- *  Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
- *   ROM on the above card: <2,1,0,0>
- *  Cabletron ethernet card: <4,1,1,265>
- *  Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
- *  Kinetics EtherPort IIN: <4,1,259,262>
- *  API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
- *
- *  Add your devices to the list!  You can obtain the "Slots" utility
- *  from Apple's FTP site at:
- *  ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
- *
- *  Alternately, TattleTech can be found at any Info-Mac mirror site.  
- *  or from its distribution site: ftp://ftp.decismkr.com/dms
- */
-
-/* DrSW: Uniquely identifies the software interface to a board.  This
-   is usually the one you want to look at when writing a driver.  It's
-   not as useful as you think, though, because as we should know by
-   now (duh), "Apple Compatible" can mean a lot of things... */
-
-/* Add known DrSW values here */
-enum nubus_drsw {
-	/* NUBUS_CAT_DISPLAY */
-	NUBUS_DRSW_APPLE        = 0x0001,
-	NUBUS_DRSW_APPLE_HIRES  = 0x0013, /* MacII HiRes card driver */
-	
-	/* NUBUS_CAT_NETWORK */
-	NUBUS_DRSW_3COM         = 0x0000,
-	NUBUS_DRSW_CABLETRON    = 0x0001,
-	NUBUS_DRSW_SONIC_LC     = 0x0001,
-	NUBUS_DRSW_KINETICS     = 0x0103,
-	NUBUS_DRSW_ASANTE       = 0x0104,
-	NUBUS_DRSW_TECHWORKS    = 0x0109,
-	NUBUS_DRSW_DAYNA        = 0x010b,
-	NUBUS_DRSW_FARALLON     = 0x010c,
-	NUBUS_DRSW_APPLE_SN     = 0x010f,
-	NUBUS_DRSW_DAYNA2       = 0x0115,
-	NUBUS_DRSW_FOCUS        = 0x011a,
-	NUBUS_DRSW_ASANTE_CS    = 0x011d, /* use asante SMC9194 driver */
-	NUBUS_DRSW_DAYNA_LC     = 0x011e,
-
-	/* NUBUS_CAT_CPU */
-	NUBUS_DRSW_NONE         = 0x0000,
-};
-
-/* DrHW: Uniquely identifies the hardware interface to a board (or at
-   least, it should...  some video cards are known to incorrectly
-   identify themselves as Toby cards) */
-
-/* Add known DrHW values here */
-enum nubus_drhw {
-	/* NUBUS_CAT_DISPLAY */
-	NUBUS_DRHW_APPLE_TFB      = 0x0001, /* Toby frame buffer card */
-	NUBUS_DRHW_APPLE_WVC      = 0x0006, /* Apple Workstation Video Card */
-	NUBUS_DRHW_SIGMA_CLRMAX   = 0x0007, /* Sigma Design ColorMax */
-	NUBUS_DRHW_APPLE_SE30     = 0x0009, /* Apple SE/30 video */
-	NUBUS_DRHW_APPLE_HRVC     = 0x0013, /* Mac II High-Res Video Card */
-	NUBUS_DRHW_APPLE_PVC      = 0x0017, /* Mac II Portrait Video Card */
-	NUBUS_DRHW_APPLE_RBV1     = 0x0018, /* IIci RBV video */
-	NUBUS_DRHW_APPLE_MDC      = 0x0019, /* Macintosh Display Card */
-	NUBUS_DRHW_APPLE_SONORA   = 0x0022, /* Sonora built-in video */
-	NUBUS_DRHW_APPLE_24AC     = 0x002b, /* Mac 24AC Video Card */
-	NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
-	NUBUS_DRHW_APPLE_JET      = 0x0029, /* Jet framebuffer (DuoDock) */
-	NUBUS_DRHW_SMAC_GFX       = 0x0105, /* SuperMac GFX */
-	NUBUS_DRHW_RASTER_CB264   = 0x013B, /* RasterOps ColorBoard 264 */
-	NUBUS_DRHW_MICRON_XCEED   = 0x0146, /* Micron Exceed color */
-	NUBUS_DRHW_RDIUS_GSC      = 0x0153, /* Radius GS/C */
-	NUBUS_DRHW_SMAC_SPEC8     = 0x017B, /* SuperMac Spectrum/8 */
-	NUBUS_DRHW_SMAC_SPEC24    = 0x017C, /* SuperMac Spectrum/24 */
-	NUBUS_DRHW_RASTER_CB364   = 0x026F, /* RasterOps ColorBoard 364 */
-	NUBUS_DRHW_RDIUS_DCGX     = 0x027C, /* Radius DirectColor/GX */
-	NUBUS_DRHW_RDIUS_PC8      = 0x0291, /* Radius PrecisionColor 8 */
-	NUBUS_DRHW_LAPIS_PCS8     = 0x0292, /* Lapis ProColorServer 8 */
-	NUBUS_DRHW_RASTER_24XLI   = 0x02A0, /* RasterOps 8/24 XLi */
-	NUBUS_DRHW_RASTER_PBPGT   = 0x02A5, /* RasterOps PaintBoard Prism GT */
-	NUBUS_DRHW_EMACH_FSX      = 0x02AE, /* E-Machines Futura SX */
-	NUBUS_DRHW_RASTER_24XLTV  = 0x02B7, /* RasterOps 24XLTV */
-	NUBUS_DRHW_SMAC_THUND24   = 0x02CB, /* SuperMac Thunder/24 */
-	NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */
-	NUBUS_DRHW_RDIUS_PC24XP   = 0x0406, /* Radius PrecisionColor 24Xp */
-	NUBUS_DRHW_RDIUS_PC24X    = 0x040A, /* Radius PrecisionColor 24X */
-	NUBUS_DRHW_RDIUS_PC8XJ    = 0x040B, /* Radius PrecisionColor 8XJ */
-	
-	/* NUBUS_CAT_NETWORK */
-	NUBUS_DRHW_INTERLAN       = 0x0100,
-	NUBUS_DRHW_SMC9194        = 0x0101,
-	NUBUS_DRHW_KINETICS       = 0x0106,
-	NUBUS_DRHW_CABLETRON      = 0x0109,
-	NUBUS_DRHW_ASANTE_LC      = 0x010f,
-	NUBUS_DRHW_SONIC          = 0x0110,
-	NUBUS_DRHW_TECHWORKS      = 0x0112,
-	NUBUS_DRHW_APPLE_SONIC_NB = 0x0118,
-	NUBUS_DRHW_APPLE_SONIC_LC = 0x0119,
-	NUBUS_DRHW_FOCUS          = 0x011c,
-	NUBUS_DRHW_SONNET         = 0x011d,
-};
+#include <uapi/linux/nubus.h>
 
-/* Resource IDs: These are the identifiers for the various weird and
-   wonderful tidbits of information that may or may not reside in the
-   NuBus ROM directory. */
-enum nubus_res_id {
-	NUBUS_RESID_TYPE         = 0x0001,
-	NUBUS_RESID_NAME         = 0x0002,
-	NUBUS_RESID_ICON         = 0x0003,
-	NUBUS_RESID_DRVRDIR      = 0x0004,
-	NUBUS_RESID_LOADREC      = 0x0005,
-	NUBUS_RESID_BOOTREC      = 0x0006,
-	NUBUS_RESID_FLAGS        = 0x0007,
-	NUBUS_RESID_HWDEVID      = 0x0008,
-	NUBUS_RESID_MINOR_BASEOS = 0x000a,
-	NUBUS_RESID_MINOR_LENGTH = 0x000b,
-	NUBUS_RESID_MAJOR_BASEOS = 0x000c,
-	NUBUS_RESID_MAJOR_LENGTH = 0x000d,
-	NUBUS_RESID_CICN         = 0x000f,
-	NUBUS_RESID_ICL8         = 0x0010,
-	NUBUS_RESID_ICL4         = 0x0011,
-};
-
-/* Category-specific resources. */
-enum nubus_board_res_id {
-	NUBUS_RESID_BOARDID      = 0x0020,
-	NUBUS_RESID_PRAMINITDATA = 0x0021,
-	NUBUS_RESID_PRIMARYINIT  = 0x0022,
-	NUBUS_RESID_TIMEOUTCONST = 0x0023,
-	NUBUS_RESID_VENDORINFO   = 0x0024,
-	NUBUS_RESID_BOARDFLAGS   = 0x0025,
-	NUBUS_RESID_SECONDINIT   = 0x0026,
-
-	/* Not sure why Apple put these next two in here */
-	NUBUS_RESID_VIDNAMES     = 0x0041,
-	NUBUS_RESID_VIDMODES     = 0x007e
-};
-
-/* Fields within the vendor info directory */
-enum nubus_vendor_res_id {
-	NUBUS_RESID_VEND_ID     = 0x0001,
-	NUBUS_RESID_VEND_SERIAL = 0x0002,
-	NUBUS_RESID_VEND_REV    = 0x0003,
-	NUBUS_RESID_VEND_PART   = 0x0004,
-	NUBUS_RESID_VEND_DATE   = 0x0005
-};
-
-enum nubus_net_res_id {
-	NUBUS_RESID_MAC_ADDRESS  = 0x0080
-};
-
-enum nubus_cpu_res_id {
-	NUBUS_RESID_MEMINFO      = 0x0081,
-	NUBUS_RESID_ROMINFO      = 0x0082
-};
-
-enum nubus_display_res_id {
-	NUBUS_RESID_GAMMADIR    = 0x0040,
-	NUBUS_RESID_FIRSTMODE   = 0x0080,
-	NUBUS_RESID_SECONDMODE  = 0x0081,
-	NUBUS_RESID_THIRDMODE   = 0x0082,
-	NUBUS_RESID_FOURTHMODE  = 0x0083,
-	NUBUS_RESID_FIFTHMODE   = 0x0084,
-	NUBUS_RESID_SIXTHMODE   = 0x0085
-};
-
-struct nubus_dir
-{
-	unsigned char *base;
-	unsigned char *ptr;
-	int done;
-	int mask;
-};
-
-struct nubus_dirent
-{
-	unsigned char *base;
-	unsigned char type;
-	__u32 data;	/* Actually 24bits used */
-	int mask;
-};
-
-#ifdef __KERNEL__
 struct nubus_board {
 	struct nubus_board* next;
 	struct nubus_dev* first_dev;
@@ -352,12 +128,4 @@ void nubus_get_rsrc_mem(void* dest,
 void nubus_get_rsrc_str(void* dest,
 			const struct nubus_dirent *dirent,
 			int maxlen);
-#endif /* __KERNEL__ */
-
-/* We'd like to get rid of this eventually.  Only daynaport.c uses it now. */
-static inline void *nubus_slot_addr(int slot)
-{
-	return (void *)(0xF0000000|(slot<<24));
-}
-
 #endif /* LINUX_NUBUS_H */
diff --git a/include/linux/nvram.h b/include/linux/nvram.h
index 9189829c131c..cf0ff555a6ac 100644
--- a/include/linux/nvram.h
+++ b/include/linux/nvram.h
@@ -1,18 +1,8 @@
 #ifndef _LINUX_NVRAM_H
 #define _LINUX_NVRAM_H
 
-#include <linux/ioctl.h>
+#include <uapi/linux/nvram.h>
 
-/* /dev/nvram ioctls */
-#define NVRAM_INIT	_IO('p', 0x40) /* initialize NVRAM and set checksum */
-#define NVRAM_SETCKS	_IO('p', 0x41) /* recalculate checksum */
-
-/* for all current systems, this is where NVRAM starts */
-#define NVRAM_FIRST_BYTE    14
-/* all these functions expect an NVRAM offset, not an absolute */
-#define NVRAM_OFFSET(x)   ((x)-NVRAM_FIRST_BYTE)
-
-#ifdef __KERNEL__
 /* __foo is foo without grabbing the rtc_lock - get it yourself */
 extern unsigned char __nvram_read_byte(int i);
 extern unsigned char nvram_read_byte(int i);
@@ -20,6 +10,4 @@ extern void __nvram_write_byte(unsigned char c, int i);
 extern void nvram_write_byte(unsigned char c, int i);
 extern int __nvram_check_checksum(void);
 extern int nvram_check_checksum(void);
-#endif
-
 #endif  /* _LINUX_NVRAM_H */
diff --git a/include/linux/omap3isp.h b/include/linux/omap3isp.h
deleted file mode 100644
index c090cf9249bb..000000000000
--- a/include/linux/omap3isp.h
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * omap3isp.h
- *
- * TI OMAP3 ISP - User-space API
- *
- * Copyright (C) 2010 Nokia Corporation
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *	     Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef OMAP3_ISP_USER_H
-#define OMAP3_ISP_USER_H
-
-#include <linux/types.h>
-#include <linux/videodev2.h>
-
-/*
- * Private IOCTLs
- *
- * VIDIOC_OMAP3ISP_CCDC_CFG: Set CCDC configuration
- * VIDIOC_OMAP3ISP_PRV_CFG: Set preview engine configuration
- * VIDIOC_OMAP3ISP_AEWB_CFG: Set AEWB module configuration
- * VIDIOC_OMAP3ISP_HIST_CFG: Set histogram module configuration
- * VIDIOC_OMAP3ISP_AF_CFG: Set auto-focus module configuration
- * VIDIOC_OMAP3ISP_STAT_REQ: Read statistics (AEWB/AF/histogram) data
- * VIDIOC_OMAP3ISP_STAT_EN: Enable/disable a statistics module
- */
-
-#define VIDIOC_OMAP3ISP_CCDC_CFG \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 1, struct omap3isp_ccdc_update_config)
-#define VIDIOC_OMAP3ISP_PRV_CFG \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 2, struct omap3isp_prev_update_config)
-#define VIDIOC_OMAP3ISP_AEWB_CFG \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 3, struct omap3isp_h3a_aewb_config)
-#define VIDIOC_OMAP3ISP_HIST_CFG \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 4, struct omap3isp_hist_config)
-#define VIDIOC_OMAP3ISP_AF_CFG \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 5, struct omap3isp_h3a_af_config)
-#define VIDIOC_OMAP3ISP_STAT_REQ \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 6, struct omap3isp_stat_data)
-#define VIDIOC_OMAP3ISP_STAT_EN \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 7, unsigned long)
-
-/*
- * Events
- *
- * V4L2_EVENT_OMAP3ISP_AEWB: AEWB statistics data ready
- * V4L2_EVENT_OMAP3ISP_AF: AF statistics data ready
- * V4L2_EVENT_OMAP3ISP_HIST: Histogram statistics data ready
- */
-
-#define V4L2_EVENT_OMAP3ISP_CLASS	(V4L2_EVENT_PRIVATE_START | 0x100)
-#define V4L2_EVENT_OMAP3ISP_AEWB	(V4L2_EVENT_OMAP3ISP_CLASS | 0x1)
-#define V4L2_EVENT_OMAP3ISP_AF		(V4L2_EVENT_OMAP3ISP_CLASS | 0x2)
-#define V4L2_EVENT_OMAP3ISP_HIST	(V4L2_EVENT_OMAP3ISP_CLASS | 0x3)
-
-struct omap3isp_stat_event_status {
-	__u32 frame_number;
-	__u16 config_counter;
-	__u8 buf_err;
-};
-
-/* AE/AWB related structures and flags*/
-
-/* H3A Range Constants */
-#define OMAP3ISP_AEWB_MAX_SATURATION_LIM	1023
-#define OMAP3ISP_AEWB_MIN_WIN_H			2
-#define OMAP3ISP_AEWB_MAX_WIN_H			256
-#define OMAP3ISP_AEWB_MIN_WIN_W			6
-#define OMAP3ISP_AEWB_MAX_WIN_W			256
-#define OMAP3ISP_AEWB_MIN_WINVC			1
-#define OMAP3ISP_AEWB_MIN_WINHC			1
-#define OMAP3ISP_AEWB_MAX_WINVC			128
-#define OMAP3ISP_AEWB_MAX_WINHC			36
-#define OMAP3ISP_AEWB_MAX_WINSTART		4095
-#define OMAP3ISP_AEWB_MIN_SUB_INC		2
-#define OMAP3ISP_AEWB_MAX_SUB_INC		32
-#define OMAP3ISP_AEWB_MAX_BUF_SIZE		83600
-
-#define OMAP3ISP_AF_IIRSH_MIN			0
-#define OMAP3ISP_AF_IIRSH_MAX			4095
-#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN	1
-#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MAX	36
-#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN	1
-#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MAX	128
-#define OMAP3ISP_AF_PAXEL_INCREMENT_MIN		2
-#define OMAP3ISP_AF_PAXEL_INCREMENT_MAX		32
-#define OMAP3ISP_AF_PAXEL_HEIGHT_MIN		2
-#define OMAP3ISP_AF_PAXEL_HEIGHT_MAX		256
-#define OMAP3ISP_AF_PAXEL_WIDTH_MIN		16
-#define OMAP3ISP_AF_PAXEL_WIDTH_MAX		256
-#define OMAP3ISP_AF_PAXEL_HZSTART_MIN		1
-#define OMAP3ISP_AF_PAXEL_HZSTART_MAX		4095
-#define OMAP3ISP_AF_PAXEL_VTSTART_MIN		0
-#define OMAP3ISP_AF_PAXEL_VTSTART_MAX		4095
-#define OMAP3ISP_AF_THRESHOLD_MAX		255
-#define OMAP3ISP_AF_COEF_MAX			4095
-#define OMAP3ISP_AF_PAXEL_SIZE			48
-#define OMAP3ISP_AF_MAX_BUF_SIZE		221184
-
-/**
- * struct omap3isp_h3a_aewb_config - AE AWB configuration reset values
- * saturation_limit: Saturation limit.
- * @win_height: Window Height. Range 2 - 256, even values only.
- * @win_width: Window Width. Range 6 - 256, even values only.
- * @ver_win_count: Vertical Window Count. Range 1 - 128.
- * @hor_win_count: Horizontal Window Count. Range 1 - 36.
- * @ver_win_start: Vertical Window Start. Range 0 - 4095.
- * @hor_win_start: Horizontal Window Start. Range 0 - 4095.
- * @blk_ver_win_start: Black Vertical Windows Start. Range 0 - 4095.
- * @blk_win_height: Black Window Height. Range 2 - 256, even values only.
- * @subsample_ver_inc: Subsample Vertical points increment Range 2 - 32, even
- *                     values only.
- * @subsample_hor_inc: Subsample Horizontal points increment Range 2 - 32, even
- *                     values only.
- * @alaw_enable: AEW ALAW EN flag.
- */
-struct omap3isp_h3a_aewb_config {
-	/*
-	 * Common fields.
-	 * They should be the first ones and must be in the same order as in
-	 * ispstat_generic_config struct.
-	 */
-	__u32 buf_size;
-	__u16 config_counter;
-
-	/* Private fields */
-	__u16 saturation_limit;
-	__u16 win_height;
-	__u16 win_width;
-	__u16 ver_win_count;
-	__u16 hor_win_count;
-	__u16 ver_win_start;
-	__u16 hor_win_start;
-	__u16 blk_ver_win_start;
-	__u16 blk_win_height;
-	__u16 subsample_ver_inc;
-	__u16 subsample_hor_inc;
-	__u8 alaw_enable;
-};
-
-/**
- * struct omap3isp_stat_data - Statistic data sent to or received from user
- * @ts: Timestamp of returned framestats.
- * @buf: Pointer to pass to user.
- * @frame_number: Frame number of requested stats.
- * @cur_frame: Current frame number being processed.
- * @config_counter: Number of the configuration associated with the data.
- */
-struct omap3isp_stat_data {
-	struct timeval ts;
-	void __user *buf;
-	__u32 buf_size;
-	__u16 frame_number;
-	__u16 cur_frame;
-	__u16 config_counter;
-};
-
-
-/* Histogram related structs */
-
-/* Flags for number of bins */
-#define OMAP3ISP_HIST_BINS_32		0
-#define OMAP3ISP_HIST_BINS_64		1
-#define OMAP3ISP_HIST_BINS_128		2
-#define OMAP3ISP_HIST_BINS_256		3
-
-/* Number of bins * 4 colors * 4-bytes word */
-#define OMAP3ISP_HIST_MEM_SIZE_BINS(n)	((1 << ((n)+5))*4*4)
-
-#define OMAP3ISP_HIST_MEM_SIZE		1024
-#define OMAP3ISP_HIST_MIN_REGIONS	1
-#define OMAP3ISP_HIST_MAX_REGIONS	4
-#define OMAP3ISP_HIST_MAX_WB_GAIN	255
-#define OMAP3ISP_HIST_MIN_WB_GAIN	0
-#define OMAP3ISP_HIST_MAX_BIT_WIDTH	14
-#define OMAP3ISP_HIST_MIN_BIT_WIDTH	8
-#define OMAP3ISP_HIST_MAX_WG		4
-#define OMAP3ISP_HIST_MAX_BUF_SIZE	4096
-
-/* Source */
-#define OMAP3ISP_HIST_SOURCE_CCDC	0
-#define OMAP3ISP_HIST_SOURCE_MEM	1
-
-/* CFA pattern */
-#define OMAP3ISP_HIST_CFA_BAYER		0
-#define OMAP3ISP_HIST_CFA_FOVEONX3	1
-
-struct omap3isp_hist_region {
-	__u16 h_start;
-	__u16 h_end;
-	__u16 v_start;
-	__u16 v_end;
-};
-
-struct omap3isp_hist_config {
-	/*
-	 * Common fields.
-	 * They should be the first ones and must be in the same order as in
-	 * ispstat_generic_config struct.
-	 */
-	__u32 buf_size;
-	__u16 config_counter;
-
-	__u8 num_acc_frames;	/* Num of image frames to be processed and
-				   accumulated for each histogram frame */
-	__u16 hist_bins;	/* number of bins: 32, 64, 128, or 256 */
-	__u8 cfa;		/* BAYER or FOVEON X3 */
-	__u8 wg[OMAP3ISP_HIST_MAX_WG];	/* White Balance Gain */
-	__u8 num_regions;	/* number of regions to be configured */
-	struct omap3isp_hist_region region[OMAP3ISP_HIST_MAX_REGIONS];
-};
-
-/* Auto Focus related structs */
-
-#define OMAP3ISP_AF_NUM_COEF		11
-
-enum omap3isp_h3a_af_fvmode {
-	OMAP3ISP_AF_MODE_SUMMED = 0,
-	OMAP3ISP_AF_MODE_PEAK = 1
-};
-
-/* Red, Green, and blue pixel location in the AF windows */
-enum omap3isp_h3a_af_rgbpos {
-	OMAP3ISP_AF_GR_GB_BAYER = 0,	/* GR and GB as Bayer pattern */
-	OMAP3ISP_AF_RG_GB_BAYER = 1,	/* RG and GB as Bayer pattern */
-	OMAP3ISP_AF_GR_BG_BAYER = 2,	/* GR and BG as Bayer pattern */
-	OMAP3ISP_AF_RG_BG_BAYER = 3,	/* RG and BG as Bayer pattern */
-	OMAP3ISP_AF_GG_RB_CUSTOM = 4,	/* GG and RB as custom pattern */
-	OMAP3ISP_AF_RB_GG_CUSTOM = 5	/* RB and GG as custom pattern */
-};
-
-/* Contains the information regarding the Horizontal Median Filter */
-struct omap3isp_h3a_af_hmf {
-	__u8 enable;	/* Status of Horizontal Median Filter */
-	__u8 threshold;	/* Threshold Value for Horizontal Median Filter */
-};
-
-/* Contains the information regarding the IIR Filters */
-struct omap3isp_h3a_af_iir {
-	__u16 h_start;			/* IIR horizontal start */
-	__u16 coeff_set0[OMAP3ISP_AF_NUM_COEF];	/* Filter coefficient, set 0 */
-	__u16 coeff_set1[OMAP3ISP_AF_NUM_COEF];	/* Filter coefficient, set 1 */
-};
-
-/* Contains the information regarding the Paxels Structure in AF Engine */
-struct omap3isp_h3a_af_paxel {
-	__u16 h_start;	/* Horizontal Start Position */
-	__u16 v_start;	/* Vertical Start Position */
-	__u8 width;	/* Width of the Paxel */
-	__u8 height;	/* Height of the Paxel */
-	__u8 h_cnt;	/* Horizontal Count */
-	__u8 v_cnt;	/* vertical Count */
-	__u8 line_inc;	/* Line Increment */
-};
-
-/* Contains the parameters required for hardware set up of AF Engine */
-struct omap3isp_h3a_af_config {
-	/*
-	 * Common fields.
-	 * They should be the first ones and must be in the same order as in
-	 * ispstat_generic_config struct.
-	 */
-	__u32 buf_size;
-	__u16 config_counter;
-
-	struct omap3isp_h3a_af_hmf hmf;		/* HMF configurations */
-	struct omap3isp_h3a_af_iir iir;		/* IIR filter configurations */
-	struct omap3isp_h3a_af_paxel paxel;	/* Paxel parameters */
-	enum omap3isp_h3a_af_rgbpos rgb_pos;	/* RGB Positions */
-	enum omap3isp_h3a_af_fvmode fvmode;	/* Accumulator mode */
-	__u8 alaw_enable;			/* AF ALAW status */
-};
-
-/* ISP CCDC structs */
-
-/* Abstraction layer CCDC configurations */
-#define OMAP3ISP_CCDC_ALAW		(1 << 0)
-#define OMAP3ISP_CCDC_LPF		(1 << 1)
-#define OMAP3ISP_CCDC_BLCLAMP		(1 << 2)
-#define OMAP3ISP_CCDC_BCOMP		(1 << 3)
-#define OMAP3ISP_CCDC_FPC		(1 << 4)
-#define OMAP3ISP_CCDC_CULL		(1 << 5)
-#define OMAP3ISP_CCDC_CONFIG_LSC	(1 << 7)
-#define OMAP3ISP_CCDC_TBL_LSC		(1 << 8)
-
-#define OMAP3ISP_RGB_MAX		3
-
-/* Enumeration constants for Alaw input width */
-enum omap3isp_alaw_ipwidth {
-	OMAP3ISP_ALAW_BIT12_3 = 0x3,
-	OMAP3ISP_ALAW_BIT11_2 = 0x4,
-	OMAP3ISP_ALAW_BIT10_1 = 0x5,
-	OMAP3ISP_ALAW_BIT9_0 = 0x6
-};
-
-/**
- * struct omap3isp_ccdc_lsc_config - LSC configuration
- * @offset: Table Offset of the gain table.
- * @gain_mode_n: Vertical dimension of a paxel in LSC configuration.
- * @gain_mode_m: Horizontal dimension of a paxel in LSC configuration.
- * @gain_format: Gain table format.
- * @fmtsph: Start pixel horizontal from start of the HS sync pulse.
- * @fmtlnh: Number of pixels in horizontal direction to use for the data
- *          reformatter.
- * @fmtslv: Start line from start of VS sync pulse for the data reformatter.
- * @fmtlnv: Number of lines in vertical direction for the data reformatter.
- * @initial_x: X position, in pixels, of the first active pixel in reference
- *             to the first active paxel. Must be an even number.
- * @initial_y: Y position, in pixels, of the first active pixel in reference
- *             to the first active paxel. Must be an even number.
- * @size: Size of LSC gain table. Filled when loaded from userspace.
- */
-struct omap3isp_ccdc_lsc_config {
-	__u16 offset;
-	__u8 gain_mode_n;
-	__u8 gain_mode_m;
-	__u8 gain_format;
-	__u16 fmtsph;
-	__u16 fmtlnh;
-	__u16 fmtslv;
-	__u16 fmtlnv;
-	__u8 initial_x;
-	__u8 initial_y;
-	__u32 size;
-};
-
-/**
- * struct omap3isp_ccdc_bclamp - Optical & Digital black clamp subtract
- * @obgain: Optical black average gain.
- * @obstpixel: Start Pixel w.r.t. HS pulse in Optical black sample.
- * @oblines: Optical Black Sample lines.
- * @oblen: Optical Black Sample Length.
- * @dcsubval: Digital Black Clamp subtract value.
- */
-struct omap3isp_ccdc_bclamp {
-	__u8 obgain;
-	__u8 obstpixel;
-	__u8 oblines;
-	__u8 oblen;
-	__u16 dcsubval;
-};
-
-/**
- * struct omap3isp_ccdc_fpc - Faulty Pixels Correction
- * @fpnum: Number of faulty pixels to be corrected in the frame.
- * @fpcaddr: Memory address of the FPC Table
- */
-struct omap3isp_ccdc_fpc {
-	__u16 fpnum;
-	__u32 fpcaddr;
-};
-
-/**
- * struct omap3isp_ccdc_blcomp - Black Level Compensation parameters
- * @b_mg: B/Mg pixels. 2's complement. -128 to +127.
- * @gb_g: Gb/G pixels. 2's complement. -128 to +127.
- * @gr_cy: Gr/Cy pixels. 2's complement. -128 to +127.
- * @r_ye: R/Ye pixels. 2's complement. -128 to +127.
- */
-struct omap3isp_ccdc_blcomp {
-	__u8 b_mg;
-	__u8 gb_g;
-	__u8 gr_cy;
-	__u8 r_ye;
-};
-
-/**
- * omap3isp_ccdc_culling - Culling parameters
- * @v_pattern: Vertical culling pattern.
- * @h_odd: Horizontal Culling pattern for odd lines.
- * @h_even: Horizontal Culling pattern for even lines.
- */
-struct omap3isp_ccdc_culling {
-	__u8 v_pattern;
-	__u16 h_odd;
-	__u16 h_even;
-};
-
-/**
- * omap3isp_ccdc_update_config - CCDC configuration
- * @update: Specifies which CCDC registers should be updated.
- * @flag: Specifies which CCDC functions should be enabled.
- * @alawip: Enable/Disable A-Law compression.
- * @bclamp: Black clamp control register.
- * @blcomp: Black level compensation value for RGrGbB Pixels. 2's complement.
- * @fpc: Number of faulty pixels corrected in the frame, address of FPC table.
- * @cull: Cull control register.
- * @lsc: Pointer to LSC gain table.
- */
-struct omap3isp_ccdc_update_config {
-	__u16 update;
-	__u16 flag;
-	enum omap3isp_alaw_ipwidth alawip;
-	struct omap3isp_ccdc_bclamp __user *bclamp;
-	struct omap3isp_ccdc_blcomp __user *blcomp;
-	struct omap3isp_ccdc_fpc __user *fpc;
-	struct omap3isp_ccdc_lsc_config __user *lsc_cfg;
-	struct omap3isp_ccdc_culling __user *cull;
-	__u8 __user *lsc;
-};
-
-/* Preview configurations */
-#define OMAP3ISP_PREV_LUMAENH		(1 << 0)
-#define OMAP3ISP_PREV_INVALAW		(1 << 1)
-#define OMAP3ISP_PREV_HRZ_MED		(1 << 2)
-#define OMAP3ISP_PREV_CFA		(1 << 3)
-#define OMAP3ISP_PREV_CHROMA_SUPP	(1 << 4)
-#define OMAP3ISP_PREV_WB		(1 << 5)
-#define OMAP3ISP_PREV_BLKADJ		(1 << 6)
-#define OMAP3ISP_PREV_RGB2RGB		(1 << 7)
-#define OMAP3ISP_PREV_COLOR_CONV	(1 << 8)
-#define OMAP3ISP_PREV_YC_LIMIT		(1 << 9)
-#define OMAP3ISP_PREV_DEFECT_COR	(1 << 10)
-/* Bit 11 was OMAP3ISP_PREV_GAMMABYPASS, now merged with OMAP3ISP_PREV_GAMMA */
-#define OMAP3ISP_PREV_DRK_FRM_CAPTURE	(1 << 12)
-#define OMAP3ISP_PREV_DRK_FRM_SUBTRACT	(1 << 13)
-#define OMAP3ISP_PREV_LENS_SHADING	(1 << 14)
-#define OMAP3ISP_PREV_NF		(1 << 15)
-#define OMAP3ISP_PREV_GAMMA		(1 << 16)
-
-#define OMAP3ISP_PREV_NF_TBL_SIZE	64
-#define OMAP3ISP_PREV_CFA_TBL_SIZE	576
-#define OMAP3ISP_PREV_CFA_BLK_SIZE	(OMAP3ISP_PREV_CFA_TBL_SIZE / 4)
-#define OMAP3ISP_PREV_GAMMA_TBL_SIZE	1024
-#define OMAP3ISP_PREV_YENH_TBL_SIZE	128
-
-#define OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS	4
-
-/**
- * struct omap3isp_prev_hmed - Horizontal Median Filter
- * @odddist: Distance between consecutive pixels of same color in the odd line.
- * @evendist: Distance between consecutive pixels of same color in the even
- *            line.
- * @thres: Horizontal median filter threshold.
- */
-struct omap3isp_prev_hmed {
-	__u8 odddist;
-	__u8 evendist;
-	__u8 thres;
-};
-
-/*
- * Enumeration for CFA Formats supported by preview
- */
-enum omap3isp_cfa_fmt {
-	OMAP3ISP_CFAFMT_BAYER,
-	OMAP3ISP_CFAFMT_SONYVGA,
-	OMAP3ISP_CFAFMT_RGBFOVEON,
-	OMAP3ISP_CFAFMT_DNSPL,
-	OMAP3ISP_CFAFMT_HONEYCOMB,
-	OMAP3ISP_CFAFMT_RRGGBBFOVEON
-};
-
-/**
- * struct omap3isp_prev_cfa - CFA Interpolation
- * @format: CFA Format Enum value supported by preview.
- * @gradthrs_vert: CFA Gradient Threshold - Vertical.
- * @gradthrs_horz: CFA Gradient Threshold - Horizontal.
- * @table: Pointer to the CFA table.
- */
-struct omap3isp_prev_cfa {
-	enum omap3isp_cfa_fmt format;
-	__u8 gradthrs_vert;
-	__u8 gradthrs_horz;
-	__u32 table[4][OMAP3ISP_PREV_CFA_BLK_SIZE];
-};
-
-/**
- * struct omap3isp_prev_csup - Chrominance Suppression
- * @gain: Gain.
- * @thres: Threshold.
- * @hypf_en: Flag to enable/disable the High Pass Filter.
- */
-struct omap3isp_prev_csup {
-	__u8 gain;
-	__u8 thres;
-	__u8 hypf_en;
-};
-
-/**
- * struct omap3isp_prev_wbal - White Balance
- * @dgain: Digital gain (U10Q8).
- * @coef3: White balance gain - COEF 3 (U8Q5).
- * @coef2: White balance gain - COEF 2 (U8Q5).
- * @coef1: White balance gain - COEF 1 (U8Q5).
- * @coef0: White balance gain - COEF 0 (U8Q5).
- */
-struct omap3isp_prev_wbal {
-	__u16 dgain;
-	__u8 coef3;
-	__u8 coef2;
-	__u8 coef1;
-	__u8 coef0;
-};
-
-/**
- * struct omap3isp_prev_blkadj - Black Level Adjustment
- * @red: Black level offset adjustment for Red in 2's complement format
- * @green: Black level offset adjustment for Green in 2's complement format
- * @blue: Black level offset adjustment for Blue in 2's complement format
- */
-struct omap3isp_prev_blkadj {
-	/*Black level offset adjustment for Red in 2's complement format */
-	__u8 red;
-	/*Black level offset adjustment for Green in 2's complement format */
-	__u8 green;
-	/* Black level offset adjustment for Blue in 2's complement format */
-	__u8 blue;
-};
-
-/**
- * struct omap3isp_prev_rgbtorgb - RGB to RGB Blending
- * @matrix: Blending values(S12Q8 format)
- *              [RR] [GR] [BR]
- *              [RG] [GG] [BG]
- *              [RB] [GB] [BB]
- * @offset: Blending offset value for R,G,B in 2's complement integer format.
- */
-struct omap3isp_prev_rgbtorgb {
-	__u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
-	__u16 offset[OMAP3ISP_RGB_MAX];
-};
-
-/**
- * struct omap3isp_prev_csc - Color Space Conversion from RGB-YCbYCr
- * @matrix: Color space conversion coefficients(S10Q8)
- *              [CSCRY]  [CSCGY]  [CSCBY]
- *              [CSCRCB] [CSCGCB] [CSCBCB]
- *              [CSCRCR] [CSCGCR] [CSCBCR]
- * @offset: CSC offset values for Y offset, CB offset and CR offset respectively
- */
-struct omap3isp_prev_csc {
-	__u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
-	__s16 offset[OMAP3ISP_RGB_MAX];
-};
-
-/**
- * struct omap3isp_prev_yclimit - Y, C Value Limit
- * @minC: Minimum C value
- * @maxC: Maximum C value
- * @minY: Minimum Y value
- * @maxY: Maximum Y value
- */
-struct omap3isp_prev_yclimit {
-	__u8 minC;
-	__u8 maxC;
-	__u8 minY;
-	__u8 maxY;
-};
-
-/**
- * struct omap3isp_prev_dcor - Defect correction
- * @couplet_mode_en: Flag to enable or disable the couplet dc Correction in NF
- * @detect_correct: Thresholds for correction bit 0:10 detect 16:25 correct
- */
-struct omap3isp_prev_dcor {
-	__u8 couplet_mode_en;
-	__u32 detect_correct[OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS];
-};
-
-/**
- * struct omap3isp_prev_nf - Noise Filter
- * @spread: Spread value to be used in Noise Filter
- * @table: Pointer to the Noise Filter table
- */
-struct omap3isp_prev_nf {
-	__u8 spread;
-	__u32 table[OMAP3ISP_PREV_NF_TBL_SIZE];
-};
-
-/**
- * struct omap3isp_prev_gtables - Gamma correction tables
- * @red: Array for red gamma table.
- * @green: Array for green gamma table.
- * @blue: Array for blue gamma table.
- */
-struct omap3isp_prev_gtables {
-	__u32 red[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
-	__u32 green[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
-	__u32 blue[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
-};
-
-/**
- * struct omap3isp_prev_luma - Luma enhancement
- * @table: Array for luma enhancement table.
- */
-struct omap3isp_prev_luma {
-	__u32 table[OMAP3ISP_PREV_YENH_TBL_SIZE];
-};
-
-/**
- * struct omap3isp_prev_update_config - Preview engine configuration (user)
- * @update: Specifies which ISP Preview registers should be updated.
- * @flag: Specifies which ISP Preview functions should be enabled.
- * @shading_shift: 3bit value of shift used in shading compensation.
- * @luma: Pointer to luma enhancement structure.
- * @hmed: Pointer to structure containing the odd and even distance.
- *        between the pixels in the image along with the filter threshold.
- * @cfa: Pointer to structure containing the CFA interpolation table, CFA.
- *       format in the image, vertical and horizontal gradient threshold.
- * @csup: Pointer to Structure for Chrominance Suppression coefficients.
- * @wbal: Pointer to structure for White Balance.
- * @blkadj: Pointer to structure for Black Adjustment.
- * @rgb2rgb: Pointer to structure for RGB to RGB Blending.
- * @csc: Pointer to structure for Color Space Conversion from RGB-YCbYCr.
- * @yclimit: Pointer to structure for Y, C Value Limit.
- * @dcor: Pointer to structure for defect correction.
- * @nf: Pointer to structure for Noise Filter
- * @gamma: Pointer to gamma structure.
- */
-struct omap3isp_prev_update_config {
-	__u32 update;
-	__u32 flag;
-	__u32 shading_shift;
-	struct omap3isp_prev_luma __user *luma;
-	struct omap3isp_prev_hmed __user *hmed;
-	struct omap3isp_prev_cfa __user *cfa;
-	struct omap3isp_prev_csup __user *csup;
-	struct omap3isp_prev_wbal __user *wbal;
-	struct omap3isp_prev_blkadj __user *blkadj;
-	struct omap3isp_prev_rgbtorgb __user *rgb2rgb;
-	struct omap3isp_prev_csc __user *csc;
-	struct omap3isp_prev_yclimit __user *yclimit;
-	struct omap3isp_prev_dcor __user *dcor;
-	struct omap3isp_prev_nf __user *nf;
-	struct omap3isp_prev_gtables __user *gamma;
-};
-
-#endif	/* OMAP3_ISP_USER_H */
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 85af8184691a..d1f4dccaeede 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -20,205 +20,11 @@
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
-
 #ifndef __LINUX_OMAPFB_H__
 #define __LINUX_OMAPFB_H__
 
-#include <linux/fb.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
-#define OMAP_IO(num)		_IO('O', num)
-
-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
-#define OMAPFB_VSYNC		OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
-#define OMAPFB_WAITFORVSYNC	OMAP_IO(57)
-#define OMAPFB_MEMORY_READ	OMAP_IOR(58, struct omapfb_memory_read)
-#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
-#define OMAPFB_WAITFORGO	OMAP_IO(60)
-#define OMAPFB_GET_VRAM_INFO	OMAP_IOR(61, struct omapfb_vram_info)
-#define OMAPFB_SET_TEARSYNC	OMAP_IOW(62, struct omapfb_tearsync_info)
-#define OMAPFB_GET_DISPLAY_INFO	OMAP_IOR(63, struct omapfb_display_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
-#define OMAPFB_CAPS_TEARSYNC		0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
-#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK		0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
-
-#define OMAPFB_MEMTYPE_SDRAM		0
-#define OMAPFB_MEMTYPE_SRAM		1
-#define OMAPFB_MEMTYPE_MAX		1
-
-#define OMAPFB_MEM_IDX_ENABLED	0x80
-#define OMAPFB_MEM_IDX_MASK	0x7f
-
-enum omapfb_color_format {
-	OMAPFB_COLOR_RGB565 = 0,
-	OMAPFB_COLOR_YUV422,
-	OMAPFB_COLOR_YUV420,
-	OMAPFB_COLOR_CLUT_8BPP,
-	OMAPFB_COLOR_CLUT_4BPP,
-	OMAPFB_COLOR_CLUT_2BPP,
-	OMAPFB_COLOR_CLUT_1BPP,
-	OMAPFB_COLOR_RGB444,
-	OMAPFB_COLOR_YUY422,
-
-	OMAPFB_COLOR_ARGB16,
-	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
-	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
-	OMAPFB_COLOR_ARGB32,
-	OMAPFB_COLOR_RGBA32,
-	OMAPFB_COLOR_RGBX32,
-};
-
-struct omapfb_update_window {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-	__u32 out_x, out_y;
-	__u32 out_width, out_height;
-	__u32 reserved[8];
-};
+#include <uapi/linux/omapfb.h>
 
-struct omapfb_update_window_old {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-};
-
-enum omapfb_plane {
-	OMAPFB_PLANE_GFX = 0,
-	OMAPFB_PLANE_VID1,
-	OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
-	OMAPFB_CHANNEL_OUT_LCD = 0,
-	OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
-	__u32 pos_x;
-	__u32 pos_y;
-	__u8  enabled;
-	__u8  channel_out;
-	__u8  mirror;
-	__u8  mem_idx;
-	__u32 out_width;
-	__u32 out_height;
-	__u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
-	__u32 size;
-	__u8  type;
-	__u8  reserved[3];
-};
-
-struct omapfb_caps {
-	__u32 ctrl;
-	__u32 plane_color;
-	__u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
-	OMAPFB_COLOR_KEY_DISABLED = 0,
-	OMAPFB_COLOR_KEY_GFX_DST,
-	OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
-	__u8  channel_out;
-	__u32 background;
-	__u32 trans_key;
-	__u8  key_type;
-};
-
-enum omapfb_update_mode {
-	OMAPFB_UPDATE_DISABLED = 0,
-	OMAPFB_AUTO_UPDATE,
-	OMAPFB_MANUAL_UPDATE
-};
-
-struct omapfb_memory_read {
-	__u16 x;
-	__u16 y;
-	__u16 w;
-	__u16 h;
-	size_t buffer_size;
-	void __user *buffer;
-};
-
-struct omapfb_ovl_colormode {
-	__u8 overlay_idx;
-	__u8 mode_idx;
-	__u32 bits_per_pixel;
-	__u32 nonstd;
-	struct fb_bitfield red;
-	struct fb_bitfield green;
-	struct fb_bitfield blue;
-	struct fb_bitfield transp;
-};
-
-struct omapfb_vram_info {
-	__u32 total;
-	__u32 free;
-	__u32 largest_free_block;
-	__u32 reserved[5];
-};
-
-struct omapfb_tearsync_info {
-	__u8 enabled;
-	__u8 reserved1[3];
-	__u16 line;
-	__u16 reserved2;
-};
-
-struct omapfb_display_info {
-	__u16 xres;
-	__u16 yres;
-	__u32 width;	/* phys width of the display in micrometers */
-	__u32 height;	/* phys height of the display in micrometers */
-	__u32 reserved[5];
-};
-
-#ifdef __KERNEL__
 
 struct omap_lcd_config {
 	char panel_name[16];
@@ -233,6 +39,4 @@ struct omapfb_platform_data {
 
 void __init omapfb_set_lcd_config(const struct omap_lcd_config *config);
 
-#endif
-
 #endif /* __OMAPFB_H */
diff --git a/include/linux/oom.h b/include/linux/oom.h
index d36a8221f58b..fb9826847b89 100644
--- a/include/linux/oom.h
+++ b/include/linux/oom.h
@@ -1,18 +1,11 @@
 #ifndef __INCLUDE_LINUX_OOM_H
 #define __INCLUDE_LINUX_OOM_H
 
-/*
- * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
- * pid.
- */
-#define OOM_SCORE_ADJ_MIN	(-1000)
-#define OOM_SCORE_ADJ_MAX	1000
-
-#ifdef __KERNEL__
 
 #include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/nodemask.h>
+#include <uapi/linux/oom.h>
 
 struct zonelist;
 struct notifier_block;
@@ -82,5 +75,4 @@ extern struct task_struct *find_lock_task_mm(struct task_struct *p);
 extern int sysctl_oom_dump_tasks;
 extern int sysctl_oom_kill_allocating_task;
 extern int sysctl_panic_on_oom;
-#endif /* __KERNEL__*/
 #endif /* _INCLUDE_LINUX_OOM_H */
diff --git a/include/linux/packet_diag.h b/include/linux/packet_diag.h
deleted file mode 100644
index 93f5fa94a431..000000000000
--- a/include/linux/packet_diag.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __PACKET_DIAG_H__
-#define __PACKET_DIAG_H__
-
-#include <linux/types.h>
-
-struct packet_diag_req {
-	__u8	sdiag_family;
-	__u8	sdiag_protocol;
-	__u16	pad;
-	__u32	pdiag_ino;
-	__u32	pdiag_show;
-	__u32	pdiag_cookie[2];
-};
-
-#define PACKET_SHOW_INFO	0x00000001 /* Basic packet_sk information */
-#define PACKET_SHOW_MCLIST	0x00000002 /* A set of packet_diag_mclist-s */
-#define PACKET_SHOW_RING_CFG	0x00000004 /* Rings configuration parameters */
-#define PACKET_SHOW_FANOUT	0x00000008
-
-struct packet_diag_msg {
-	__u8	pdiag_family;
-	__u8	pdiag_type;
-	__u16	pdiag_num;
-
-	__u32	pdiag_ino;
-	__u32	pdiag_cookie[2];
-};
-
-enum {
-	PACKET_DIAG_INFO,
-	PACKET_DIAG_MCLIST,
-	PACKET_DIAG_RX_RING,
-	PACKET_DIAG_TX_RING,
-	PACKET_DIAG_FANOUT,
-
-	PACKET_DIAG_MAX,
-};
-
-struct packet_diag_info {
-	__u32	pdi_index;
-	__u32	pdi_version;
-	__u32	pdi_reserve;
-	__u32	pdi_copy_thresh;
-	__u32	pdi_tstamp;
-	__u32	pdi_flags;
-
-#define PDI_RUNNING	0x1
-#define PDI_AUXDATA	0x2
-#define PDI_ORIGDEV	0x4
-#define PDI_VNETHDR	0x8
-#define PDI_LOSS	0x10
-};
-
-struct packet_diag_mclist {
-	__u32	pdmc_index;
-	__u32	pdmc_count;
-	__u16	pdmc_type;
-	__u16	pdmc_alen;
-	__u8	pdmc_addr[MAX_ADDR_LEN];
-};
-
-struct packet_diag_ring {
-	__u32	pdr_block_size;
-	__u32	pdr_block_nr;
-	__u32	pdr_frame_size;
-	__u32	pdr_frame_nr;
-	__u32	pdr_retire_tmo;
-	__u32	pdr_sizeof_priv;
-	__u32	pdr_features;
-};
-
-#endif
diff --git a/include/linux/param.h b/include/linux/param.h
deleted file mode 100644
index 092e92f67b50..000000000000
--- a/include/linux/param.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _LINUX_PARAM_H
-#define _LINUX_PARAM_H
-
-#include <asm/param.h>
-
-#endif
diff --git a/include/linux/parport.h b/include/linux/parport.h
index 106c2ca9440b..c22f12547324 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -3,96 +3,9 @@
  * the GNU Free Documentation License, Version 1.1 or any later version
  * published by the Free Software Foundation.
  */
-
 #ifndef _PARPORT_H_
 #define _PARPORT_H_
 
-/* Start off with user-visible constants */
-
-/* Maximum of 16 ports per machine */
-#define PARPORT_MAX  16
-
-/* Magic numbers */
-#define PARPORT_IRQ_NONE  -1
-#define PARPORT_DMA_NONE  -1
-#define PARPORT_IRQ_AUTO  -2
-#define PARPORT_DMA_AUTO  -2
-#define PARPORT_DMA_NOFIFO -3
-#define PARPORT_DISABLE   -2
-#define PARPORT_IRQ_PROBEONLY -3
-#define PARPORT_IOHI_AUTO -1
-
-#define PARPORT_CONTROL_STROBE    0x1
-#define PARPORT_CONTROL_AUTOFD    0x2
-#define PARPORT_CONTROL_INIT      0x4
-#define PARPORT_CONTROL_SELECT    0x8
-
-#define PARPORT_STATUS_ERROR      0x8
-#define PARPORT_STATUS_SELECT     0x10
-#define PARPORT_STATUS_PAPEROUT   0x20
-#define PARPORT_STATUS_ACK        0x40
-#define PARPORT_STATUS_BUSY       0x80
-
-/* Type classes for Plug-and-Play probe.  */
-typedef enum {
-	PARPORT_CLASS_LEGACY = 0,       /* Non-IEEE1284 device */
-	PARPORT_CLASS_PRINTER,
-	PARPORT_CLASS_MODEM,
-	PARPORT_CLASS_NET,
-	PARPORT_CLASS_HDC,              /* Hard disk controller */
-	PARPORT_CLASS_PCMCIA,
-	PARPORT_CLASS_MEDIA,            /* Multimedia device */
-	PARPORT_CLASS_FDC,              /* Floppy disk controller */
-	PARPORT_CLASS_PORTS,
-	PARPORT_CLASS_SCANNER,
-	PARPORT_CLASS_DIGCAM,
-	PARPORT_CLASS_OTHER,            /* Anything else */
-	PARPORT_CLASS_UNSPEC,           /* No CLS field in ID */
-	PARPORT_CLASS_SCSIADAPTER
-} parport_device_class;
-
-/* The "modes" entry in parport is a bit field representing the
-   capabilities of the hardware. */
-#define PARPORT_MODE_PCSPP	(1<<0) /* IBM PC registers available. */
-#define PARPORT_MODE_TRISTATE	(1<<1) /* Can tristate. */
-#define PARPORT_MODE_EPP	(1<<2) /* Hardware EPP. */
-#define PARPORT_MODE_ECP	(1<<3) /* Hardware ECP. */
-#define PARPORT_MODE_COMPAT	(1<<4) /* Hardware 'printer protocol'. */
-#define PARPORT_MODE_DMA	(1<<5) /* Hardware can DMA. */
-#define PARPORT_MODE_SAFEININT	(1<<6) /* SPP registers accessible in IRQ. */
-
-/* IEEE1284 modes: 
-   Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
-   'extensibility request' values.  Others are special.
-   'Real' ECP modes must have the IEEE1284_MODE_ECP bit set.  */
-#define IEEE1284_MODE_NIBBLE             0
-#define IEEE1284_MODE_BYTE              (1<<0)
-#define IEEE1284_MODE_COMPAT            (1<<8)
-#define IEEE1284_MODE_BECP              (1<<9) /* Bounded ECP mode */
-#define IEEE1284_MODE_ECP               (1<<4)
-#define IEEE1284_MODE_ECPRLE            (IEEE1284_MODE_ECP | (1<<5))
-#define IEEE1284_MODE_ECPSWE            (1<<10) /* Software-emulated */
-#define IEEE1284_MODE_EPP               (1<<6)
-#define IEEE1284_MODE_EPPSL             (1<<11) /* EPP 1.7 */
-#define IEEE1284_MODE_EPPSWE            (1<<12) /* Software-emulated */
-#define IEEE1284_DEVICEID               (1<<2)  /* This is a flag */
-#define IEEE1284_EXT_LINK               (1<<14) /* This flag causes the
-						 * extensibility link to
-						 * be requested, using
-						 * bits 0-6. */
-
-/* For the benefit of parport_read/write, you can use these with
- * parport_negotiate to use address operations.  They have no effect
- * other than to make parport_read/write use address transfers. */
-#define IEEE1284_ADDR			(1<<13)	/* This is a flag */
-#define IEEE1284_DATA			 0	/* So is this */
-
-/* Flags for block transfer operations. */
-#define PARPORT_EPP_FAST		(1<<0) /* Unreliable counts. */
-#define PARPORT_W91284PIC		(1<<1) /* have a Warp9 w91284pic in the device */
-
-/* The rest is for the kernel only */
-#ifdef __KERNEL__
 
 #include <linux/jiffies.h>
 #include <linux/proc_fs.h>
@@ -101,6 +14,7 @@ typedef enum {
 #include <linux/irqreturn.h>
 #include <linux/semaphore.h>
 #include <asm/ptrace.h>
+#include <uapi/linux/parport.h>
 
 /* Define this later. */
 struct parport;
@@ -564,5 +478,4 @@ extern int parport_device_proc_unregister(struct pardevice *device);
 extern unsigned long parport_default_timeslice;
 extern int parport_default_spintime;
 
-#endif /* __KERNEL__ */
 #endif /* _PARPORT_H_ */
diff --git a/include/linux/patchkey.h b/include/linux/patchkey.h
index aefda0ec6e62..97a919fc9927 100644
--- a/include/linux/patchkey.h
+++ b/include/linux/patchkey.h
@@ -9,22 +9,12 @@
  * Do not include this file directly.  Please use <sys/soundcard.h> instead.
  * For kernel code, use <linux/soundcard.h>
  */
-
-#ifndef _LINUX_PATCHKEY_H_INDIRECT
-#error "patchkey.h included directly"
-#endif
-
 #ifndef _LINUX_PATCHKEY_H
 #define _LINUX_PATCHKEY_H
 
-/* Endian macros. */
-#ifdef __KERNEL__
 #  include <asm/byteorder.h>
-#else
-#  include <endian.h>
-#endif
+#include <uapi/linux/patchkey.h>
 
-#if defined(__KERNEL__)
 #  if defined(__BIG_ENDIAN)
 #    define _PATCHKEY(id) (0xfd00|id)
 #  elif defined(__LITTLE_ENDIAN)
@@ -32,16 +22,4 @@
 #  else
 #    error "could not determine byte order"
 #  endif
-#else
-#if defined(__BYTE_ORDER)
-#  if __BYTE_ORDER == __BIG_ENDIAN
-#    define _PATCHKEY(id) (0xfd00|id)
-#  elif __BYTE_ORDER == __LITTLE_ENDIAN
-#    define _PATCHKEY(id) ((id<<8)|0x00fd)
-#  else
-#    error "could not determine byte order"
-#  endif
-#endif
-#endif
-
 #endif /* _LINUX_PATCHKEY_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index be1de01de1c4..ee2179546c63 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -13,32 +13,9 @@
  *	PCI to PCI Bridge Specification
  *	PCI System Design Guide
  */
-
 #ifndef LINUX_PCI_H
 #define LINUX_PCI_H
 
-#include <linux/pci_regs.h>	/* The pci register defines */
-
-/*
- * The PCI interface treats multi-function devices as independent
- * devices.  The slot/function address of each device is encoded
- * in a single byte as follows:
- *
- *	7:3 = slot
- *	2:0 = function
- */
-#define PCI_DEVFN(slot, func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
-#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
-#define PCI_FUNC(devfn)		((devfn) & 0x07)
-
-/* Ioctls for /proc/bus/pci/X/Y nodes. */
-#define PCIIOC_BASE		('P' << 24 | 'C' << 16 | 'I' << 8)
-#define PCIIOC_CONTROLLER	(PCIIOC_BASE | 0x00)	/* Get controller for PCI device. */
-#define PCIIOC_MMAP_IS_IO	(PCIIOC_BASE | 0x01)	/* Set mmap state to I/O space. */
-#define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
-#define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */
-
-#ifdef __KERNEL__
 
 #include <linux/mod_devicetable.h>
 
@@ -53,6 +30,7 @@
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/irqreturn.h>
+#include <uapi/linux/pci.h>
 
 /* Include the ID list */
 #include <linux/pci_ids.h>
@@ -1831,5 +1809,4 @@ static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev)
  */
 struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
 
-#endif /* __KERNEL__ */
 #endif /* LINUX_PCI_H */
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
deleted file mode 100644
index 20ae747ddf34..000000000000
--- a/include/linux/pci_regs.h
+++ /dev/null
@@ -1,846 +0,0 @@
-/*
- *	pci_regs.h
- *
- *	PCI standard defines
- *	Copyright 1994, Drew Eckhardt
- *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
- *
- *	For more information, please consult the following manuals (look at
- *	http://www.pcisig.com/ for how to get them):
- *
- *	PCI BIOS Specification
- *	PCI Local Bus Specification
- *	PCI to PCI Bridge Specification
- *	PCI System Design Guide
- *
- * 	For hypertransport information, please consult the following manuals
- * 	from http://www.hypertransport.org
- *
- *	The Hypertransport I/O Link Specification
- */
-
-#ifndef LINUX_PCI_REGS_H
-#define LINUX_PCI_REGS_H
-
-/*
- * Under PCI, each device has 256 bytes of configuration address space,
- * of which the first 64 bytes are standardized as follows:
- */
-#define PCI_STD_HEADER_SIZEOF	64
-#define PCI_VENDOR_ID		0x00	/* 16 bits */
-#define PCI_DEVICE_ID		0x02	/* 16 bits */
-#define PCI_COMMAND		0x04	/* 16 bits */
-#define  PCI_COMMAND_IO		0x1	/* Enable response in I/O space */
-#define  PCI_COMMAND_MEMORY	0x2	/* Enable response in Memory space */
-#define  PCI_COMMAND_MASTER	0x4	/* Enable bus mastering */
-#define  PCI_COMMAND_SPECIAL	0x8	/* Enable response to special cycles */
-#define  PCI_COMMAND_INVALIDATE	0x10	/* Use memory write and invalidate */
-#define  PCI_COMMAND_VGA_PALETTE 0x20	/* Enable palette snooping */
-#define  PCI_COMMAND_PARITY	0x40	/* Enable parity checking */
-#define  PCI_COMMAND_WAIT 	0x80	/* Enable address/data stepping */
-#define  PCI_COMMAND_SERR	0x100	/* Enable SERR */
-#define  PCI_COMMAND_FAST_BACK	0x200	/* Enable back-to-back writes */
-#define  PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
-
-#define PCI_STATUS		0x06	/* 16 bits */
-#define  PCI_STATUS_INTERRUPT	0x08	/* Interrupt status */
-#define  PCI_STATUS_CAP_LIST	0x10	/* Support Capability List */
-#define  PCI_STATUS_66MHZ	0x20	/* Support 66 Mhz PCI 2.1 bus */
-#define  PCI_STATUS_UDF		0x40	/* Support User Definable Features [obsolete] */
-#define  PCI_STATUS_FAST_BACK	0x80	/* Accept fast-back to back */
-#define  PCI_STATUS_PARITY	0x100	/* Detected parity error */
-#define  PCI_STATUS_DEVSEL_MASK	0x600	/* DEVSEL timing */
-#define  PCI_STATUS_DEVSEL_FAST		0x000
-#define  PCI_STATUS_DEVSEL_MEDIUM	0x200
-#define  PCI_STATUS_DEVSEL_SLOW		0x400
-#define  PCI_STATUS_SIG_TARGET_ABORT	0x800 /* Set on target abort */
-#define  PCI_STATUS_REC_TARGET_ABORT	0x1000 /* Master ack of " */
-#define  PCI_STATUS_REC_MASTER_ABORT	0x2000 /* Set on master abort */
-#define  PCI_STATUS_SIG_SYSTEM_ERROR	0x4000 /* Set when we drive SERR */
-#define  PCI_STATUS_DETECTED_PARITY	0x8000 /* Set on parity error */
-
-#define PCI_CLASS_REVISION	0x08	/* High 24 bits are class, low 8 revision */
-#define PCI_REVISION_ID		0x08	/* Revision ID */
-#define PCI_CLASS_PROG		0x09	/* Reg. Level Programming Interface */
-#define PCI_CLASS_DEVICE	0x0a	/* Device class */
-
-#define PCI_CACHE_LINE_SIZE	0x0c	/* 8 bits */
-#define PCI_LATENCY_TIMER	0x0d	/* 8 bits */
-#define PCI_HEADER_TYPE		0x0e	/* 8 bits */
-#define  PCI_HEADER_TYPE_NORMAL		0
-#define  PCI_HEADER_TYPE_BRIDGE		1
-#define  PCI_HEADER_TYPE_CARDBUS	2
-
-#define PCI_BIST		0x0f	/* 8 bits */
-#define  PCI_BIST_CODE_MASK	0x0f	/* Return result */
-#define  PCI_BIST_START		0x40	/* 1 to start BIST, 2 secs or less */
-#define  PCI_BIST_CAPABLE	0x80	/* 1 if BIST capable */
-
-/*
- * Base addresses specify locations in memory or I/O space.
- * Decoded size can be determined by writing a value of
- * 0xffffffff to the register, and reading it back.  Only
- * 1 bits are decoded.
- */
-#define PCI_BASE_ADDRESS_0	0x10	/* 32 bits */
-#define PCI_BASE_ADDRESS_1	0x14	/* 32 bits [htype 0,1 only] */
-#define PCI_BASE_ADDRESS_2	0x18	/* 32 bits [htype 0 only] */
-#define PCI_BASE_ADDRESS_3	0x1c	/* 32 bits */
-#define PCI_BASE_ADDRESS_4	0x20	/* 32 bits */
-#define PCI_BASE_ADDRESS_5	0x24	/* 32 bits */
-#define  PCI_BASE_ADDRESS_SPACE		0x01	/* 0 = memory, 1 = I/O */
-#define  PCI_BASE_ADDRESS_SPACE_IO	0x01
-#define  PCI_BASE_ADDRESS_SPACE_MEMORY	0x00
-#define  PCI_BASE_ADDRESS_MEM_TYPE_MASK	0x06
-#define  PCI_BASE_ADDRESS_MEM_TYPE_32	0x00	/* 32 bit address */
-#define  PCI_BASE_ADDRESS_MEM_TYPE_1M	0x02	/* Below 1M [obsolete] */
-#define  PCI_BASE_ADDRESS_MEM_TYPE_64	0x04	/* 64 bit address */
-#define  PCI_BASE_ADDRESS_MEM_PREFETCH	0x08	/* prefetchable? */
-#define  PCI_BASE_ADDRESS_MEM_MASK	(~0x0fUL)
-#define  PCI_BASE_ADDRESS_IO_MASK	(~0x03UL)
-/* bit 1 is reserved if address_space = 1 */
-
-/* Header type 0 (normal devices) */
-#define PCI_CARDBUS_CIS		0x28
-#define PCI_SUBSYSTEM_VENDOR_ID	0x2c
-#define PCI_SUBSYSTEM_ID	0x2e
-#define PCI_ROM_ADDRESS		0x30	/* Bits 31..11 are address, 10..1 reserved */
-#define  PCI_ROM_ADDRESS_ENABLE	0x01
-#define PCI_ROM_ADDRESS_MASK	(~0x7ffUL)
-
-#define PCI_CAPABILITY_LIST	0x34	/* Offset of first capability list entry */
-
-/* 0x35-0x3b are reserved */
-#define PCI_INTERRUPT_LINE	0x3c	/* 8 bits */
-#define PCI_INTERRUPT_PIN	0x3d	/* 8 bits */
-#define PCI_MIN_GNT		0x3e	/* 8 bits */
-#define PCI_MAX_LAT		0x3f	/* 8 bits */
-
-/* Header type 1 (PCI-to-PCI bridges) */
-#define PCI_PRIMARY_BUS		0x18	/* Primary bus number */
-#define PCI_SECONDARY_BUS	0x19	/* Secondary bus number */
-#define PCI_SUBORDINATE_BUS	0x1a	/* Highest bus number behind the bridge */
-#define PCI_SEC_LATENCY_TIMER	0x1b	/* Latency timer for secondary interface */
-#define PCI_IO_BASE		0x1c	/* I/O range behind the bridge */
-#define PCI_IO_LIMIT		0x1d
-#define  PCI_IO_RANGE_TYPE_MASK	0x0fUL	/* I/O bridging type */
-#define  PCI_IO_RANGE_TYPE_16	0x00
-#define  PCI_IO_RANGE_TYPE_32	0x01
-#define  PCI_IO_RANGE_MASK	(~0x0fUL) /* Standard 4K I/O windows */
-#define  PCI_IO_1K_RANGE_MASK	(~0x03UL) /* Intel 1K I/O windows */
-#define PCI_SEC_STATUS		0x1e	/* Secondary status register, only bit 14 used */
-#define PCI_MEMORY_BASE		0x20	/* Memory range behind */
-#define PCI_MEMORY_LIMIT	0x22
-#define  PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL
-#define  PCI_MEMORY_RANGE_MASK	(~0x0fUL)
-#define PCI_PREF_MEMORY_BASE	0x24	/* Prefetchable memory range behind */
-#define PCI_PREF_MEMORY_LIMIT	0x26
-#define  PCI_PREF_RANGE_TYPE_MASK 0x0fUL
-#define  PCI_PREF_RANGE_TYPE_32	0x00
-#define  PCI_PREF_RANGE_TYPE_64	0x01
-#define  PCI_PREF_RANGE_MASK	(~0x0fUL)
-#define PCI_PREF_BASE_UPPER32	0x28	/* Upper half of prefetchable memory range */
-#define PCI_PREF_LIMIT_UPPER32	0x2c
-#define PCI_IO_BASE_UPPER16	0x30	/* Upper half of I/O addresses */
-#define PCI_IO_LIMIT_UPPER16	0x32
-/* 0x34 same as for htype 0 */
-/* 0x35-0x3b is reserved */
-#define PCI_ROM_ADDRESS1	0x38	/* Same as PCI_ROM_ADDRESS, but for htype 1 */
-/* 0x3c-0x3d are same as for htype 0 */
-#define PCI_BRIDGE_CONTROL	0x3e
-#define  PCI_BRIDGE_CTL_PARITY	0x01	/* Enable parity detection on secondary interface */
-#define  PCI_BRIDGE_CTL_SERR	0x02	/* The same for SERR forwarding */
-#define  PCI_BRIDGE_CTL_ISA	0x04	/* Enable ISA mode */
-#define  PCI_BRIDGE_CTL_VGA	0x08	/* Forward VGA addresses */
-#define  PCI_BRIDGE_CTL_MASTER_ABORT	0x20  /* Report master aborts */
-#define  PCI_BRIDGE_CTL_BUS_RESET	0x40	/* Secondary bus reset */
-#define  PCI_BRIDGE_CTL_FAST_BACK	0x80	/* Fast Back2Back enabled on secondary interface */
-
-/* Header type 2 (CardBus bridges) */
-#define PCI_CB_CAPABILITY_LIST	0x14
-/* 0x15 reserved */
-#define PCI_CB_SEC_STATUS	0x16	/* Secondary status */
-#define PCI_CB_PRIMARY_BUS	0x18	/* PCI bus number */
-#define PCI_CB_CARD_BUS		0x19	/* CardBus bus number */
-#define PCI_CB_SUBORDINATE_BUS	0x1a	/* Subordinate bus number */
-#define PCI_CB_LATENCY_TIMER	0x1b	/* CardBus latency timer */
-#define PCI_CB_MEMORY_BASE_0	0x1c
-#define PCI_CB_MEMORY_LIMIT_0	0x20
-#define PCI_CB_MEMORY_BASE_1	0x24
-#define PCI_CB_MEMORY_LIMIT_1	0x28
-#define PCI_CB_IO_BASE_0	0x2c
-#define PCI_CB_IO_BASE_0_HI	0x2e
-#define PCI_CB_IO_LIMIT_0	0x30
-#define PCI_CB_IO_LIMIT_0_HI	0x32
-#define PCI_CB_IO_BASE_1	0x34
-#define PCI_CB_IO_BASE_1_HI	0x36
-#define PCI_CB_IO_LIMIT_1	0x38
-#define PCI_CB_IO_LIMIT_1_HI	0x3a
-#define  PCI_CB_IO_RANGE_MASK	(~0x03UL)
-/* 0x3c-0x3d are same as for htype 0 */
-#define PCI_CB_BRIDGE_CONTROL	0x3e
-#define  PCI_CB_BRIDGE_CTL_PARITY	0x01	/* Similar to standard bridge control register */
-#define  PCI_CB_BRIDGE_CTL_SERR		0x02
-#define  PCI_CB_BRIDGE_CTL_ISA		0x04
-#define  PCI_CB_BRIDGE_CTL_VGA		0x08
-#define  PCI_CB_BRIDGE_CTL_MASTER_ABORT	0x20
-#define  PCI_CB_BRIDGE_CTL_CB_RESET	0x40	/* CardBus reset */
-#define  PCI_CB_BRIDGE_CTL_16BIT_INT	0x80	/* Enable interrupt for 16-bit cards */
-#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100	/* Prefetch enable for both memory regions */
-#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
-#define  PCI_CB_BRIDGE_CTL_POST_WRITES	0x400
-#define PCI_CB_SUBSYSTEM_VENDOR_ID	0x40
-#define PCI_CB_SUBSYSTEM_ID		0x42
-#define PCI_CB_LEGACY_MODE_BASE		0x44	/* 16-bit PC Card legacy mode base address (ExCa) */
-/* 0x48-0x7f reserved */
-
-/* Capability lists */
-
-#define PCI_CAP_LIST_ID		0	/* Capability ID */
-#define  PCI_CAP_ID_PM		0x01	/* Power Management */
-#define  PCI_CAP_ID_AGP		0x02	/* Accelerated Graphics Port */
-#define  PCI_CAP_ID_VPD		0x03	/* Vital Product Data */
-#define  PCI_CAP_ID_SLOTID	0x04	/* Slot Identification */
-#define  PCI_CAP_ID_MSI		0x05	/* Message Signalled Interrupts */
-#define  PCI_CAP_ID_CHSWP	0x06	/* CompactPCI HotSwap */
-#define  PCI_CAP_ID_PCIX	0x07	/* PCI-X */
-#define  PCI_CAP_ID_HT		0x08	/* HyperTransport */
-#define  PCI_CAP_ID_VNDR	0x09	/* Vendor specific */
-#define  PCI_CAP_ID_DBG		0x0A	/* Debug port */
-#define  PCI_CAP_ID_CCRC	0x0B	/* CompactPCI Central Resource Control */
-#define  PCI_CAP_ID_SHPC 	0x0C	/* PCI Standard Hot-Plug Controller */
-#define  PCI_CAP_ID_SSVID	0x0D	/* Bridge subsystem vendor/device ID */
-#define  PCI_CAP_ID_AGP3	0x0E	/* AGP Target PCI-PCI bridge */
-#define  PCI_CAP_ID_SECDEV	0x0F	/* Secure Device */
-#define  PCI_CAP_ID_EXP 	0x10	/* PCI Express */
-#define  PCI_CAP_ID_MSIX	0x11	/* MSI-X */
-#define  PCI_CAP_ID_SATA	0x12	/* SATA Data/Index Conf. */
-#define  PCI_CAP_ID_AF		0x13	/* PCI Advanced Features */
-#define  PCI_CAP_ID_MAX		PCI_CAP_ID_AF
-#define PCI_CAP_LIST_NEXT	1	/* Next capability in the list */
-#define PCI_CAP_FLAGS		2	/* Capability defined flags (16 bits) */
-#define PCI_CAP_SIZEOF		4
-
-/* Power Management Registers */
-
-#define PCI_PM_PMC		2	/* PM Capabilities Register */
-#define  PCI_PM_CAP_VER_MASK	0x0007	/* Version */
-#define  PCI_PM_CAP_PME_CLOCK	0x0008	/* PME clock required */
-#define  PCI_PM_CAP_RESERVED    0x0010  /* Reserved field */
-#define  PCI_PM_CAP_DSI		0x0020	/* Device specific initialization */
-#define  PCI_PM_CAP_AUX_POWER	0x01C0	/* Auxiliary power support mask */
-#define  PCI_PM_CAP_D1		0x0200	/* D1 power state support */
-#define  PCI_PM_CAP_D2		0x0400	/* D2 power state support */
-#define  PCI_PM_CAP_PME		0x0800	/* PME pin supported */
-#define  PCI_PM_CAP_PME_MASK	0xF800	/* PME Mask of all supported states */
-#define  PCI_PM_CAP_PME_D0	0x0800	/* PME# from D0 */
-#define  PCI_PM_CAP_PME_D1	0x1000	/* PME# from D1 */
-#define  PCI_PM_CAP_PME_D2	0x2000	/* PME# from D2 */
-#define  PCI_PM_CAP_PME_D3	0x4000	/* PME# from D3 (hot) */
-#define  PCI_PM_CAP_PME_D3cold	0x8000	/* PME# from D3 (cold) */
-#define  PCI_PM_CAP_PME_SHIFT	11	/* Start of the PME Mask in PMC */
-#define PCI_PM_CTRL		4	/* PM control and status register */
-#define  PCI_PM_CTRL_STATE_MASK	0x0003	/* Current power state (D0 to D3) */
-#define  PCI_PM_CTRL_NO_SOFT_RESET	0x0008	/* No reset for D3hot->D0 */
-#define  PCI_PM_CTRL_PME_ENABLE	0x0100	/* PME pin enable */
-#define  PCI_PM_CTRL_DATA_SEL_MASK	0x1e00	/* Data select (??) */
-#define  PCI_PM_CTRL_DATA_SCALE_MASK	0x6000	/* Data scale (??) */
-#define  PCI_PM_CTRL_PME_STATUS	0x8000	/* PME pin status */
-#define PCI_PM_PPB_EXTENSIONS	6	/* PPB support extensions (??) */
-#define  PCI_PM_PPB_B2_B3	0x40	/* Stop clock when in D3hot (??) */
-#define  PCI_PM_BPCC_ENABLE	0x80	/* Bus power/clock control enable (??) */
-#define PCI_PM_DATA_REGISTER	7	/* (??) */
-#define PCI_PM_SIZEOF		8
-
-/* AGP registers */
-
-#define PCI_AGP_VERSION		2	/* BCD version number */
-#define PCI_AGP_RFU		3	/* Rest of capability flags */
-#define PCI_AGP_STATUS		4	/* Status register */
-#define  PCI_AGP_STATUS_RQ_MASK	0xff000000	/* Maximum number of requests - 1 */
-#define  PCI_AGP_STATUS_SBA	0x0200	/* Sideband addressing supported */
-#define  PCI_AGP_STATUS_64BIT	0x0020	/* 64-bit addressing supported */
-#define  PCI_AGP_STATUS_FW	0x0010	/* FW transfers supported */
-#define  PCI_AGP_STATUS_RATE4	0x0004	/* 4x transfer rate supported */
-#define  PCI_AGP_STATUS_RATE2	0x0002	/* 2x transfer rate supported */
-#define  PCI_AGP_STATUS_RATE1	0x0001	/* 1x transfer rate supported */
-#define PCI_AGP_COMMAND		8	/* Control register */
-#define  PCI_AGP_COMMAND_RQ_MASK 0xff000000  /* Master: Maximum number of requests */
-#define  PCI_AGP_COMMAND_SBA	0x0200	/* Sideband addressing enabled */
-#define  PCI_AGP_COMMAND_AGP	0x0100	/* Allow processing of AGP transactions */
-#define  PCI_AGP_COMMAND_64BIT	0x0020 	/* Allow processing of 64-bit addresses */
-#define  PCI_AGP_COMMAND_FW	0x0010 	/* Force FW transfers */
-#define  PCI_AGP_COMMAND_RATE4	0x0004	/* Use 4x rate */
-#define  PCI_AGP_COMMAND_RATE2	0x0002	/* Use 2x rate */
-#define  PCI_AGP_COMMAND_RATE1	0x0001	/* Use 1x rate */
-#define PCI_AGP_SIZEOF		12
-
-/* Vital Product Data */
-
-#define PCI_VPD_ADDR		2	/* Address to access (15 bits!) */
-#define  PCI_VPD_ADDR_MASK	0x7fff	/* Address mask */
-#define  PCI_VPD_ADDR_F		0x8000	/* Write 0, 1 indicates completion */
-#define PCI_VPD_DATA		4	/* 32-bits of data returned here */
-#define PCI_CAP_VPD_SIZEOF	8
-
-/* Slot Identification */
-
-#define PCI_SID_ESR		2	/* Expansion Slot Register */
-#define  PCI_SID_ESR_NSLOTS	0x1f	/* Number of expansion slots available */
-#define  PCI_SID_ESR_FIC	0x20	/* First In Chassis Flag */
-#define PCI_SID_CHASSIS_NR	3	/* Chassis Number */
-
-/* Message Signalled Interrupts registers */
-
-#define PCI_MSI_FLAGS		2	/* Various flags */
-#define  PCI_MSI_FLAGS_64BIT	0x80	/* 64-bit addresses allowed */
-#define  PCI_MSI_FLAGS_QSIZE	0x70	/* Message queue size configured */
-#define  PCI_MSI_FLAGS_QMASK	0x0e	/* Maximum queue size available */
-#define  PCI_MSI_FLAGS_ENABLE	0x01	/* MSI feature enabled */
-#define  PCI_MSI_FLAGS_MASKBIT	0x100	/* 64-bit mask bits allowed */
-#define PCI_MSI_RFU		3	/* Rest of capability flags */
-#define PCI_MSI_ADDRESS_LO	4	/* Lower 32 bits */
-#define PCI_MSI_ADDRESS_HI	8	/* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
-#define PCI_MSI_DATA_32		8	/* 16 bits of data for 32-bit devices */
-#define PCI_MSI_MASK_32		12	/* Mask bits register for 32-bit devices */
-#define PCI_MSI_PENDING_32	16	/* Pending intrs for 32-bit devices */
-#define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
-#define PCI_MSI_MASK_64		16	/* Mask bits register for 64-bit devices */
-#define PCI_MSI_PENDING_64	20	/* Pending intrs for 64-bit devices */
-
-/* MSI-X registers */
-#define PCI_MSIX_FLAGS		2
-#define  PCI_MSIX_FLAGS_QSIZE	0x7FF
-#define  PCI_MSIX_FLAGS_ENABLE	(1 << 15)
-#define  PCI_MSIX_FLAGS_MASKALL	(1 << 14)
-#define PCI_MSIX_TABLE		4
-#define PCI_MSIX_PBA		8
-#define  PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
-#define PCI_CAP_MSIX_SIZEOF	12	/* size of MSIX registers */
-
-/* MSI-X entry's format */
-#define PCI_MSIX_ENTRY_SIZE		16
-#define  PCI_MSIX_ENTRY_LOWER_ADDR	0
-#define  PCI_MSIX_ENTRY_UPPER_ADDR	4
-#define  PCI_MSIX_ENTRY_DATA		8
-#define  PCI_MSIX_ENTRY_VECTOR_CTRL	12
-#define   PCI_MSIX_ENTRY_CTRL_MASKBIT	1
-
-/* CompactPCI Hotswap Register */
-
-#define PCI_CHSWP_CSR		2	/* Control and Status Register */
-#define  PCI_CHSWP_DHA		0x01	/* Device Hiding Arm */
-#define  PCI_CHSWP_EIM		0x02	/* ENUM# Signal Mask */
-#define  PCI_CHSWP_PIE		0x04	/* Pending Insert or Extract */
-#define  PCI_CHSWP_LOO		0x08	/* LED On / Off */
-#define  PCI_CHSWP_PI		0x30	/* Programming Interface */
-#define  PCI_CHSWP_EXT		0x40	/* ENUM# status - extraction */
-#define  PCI_CHSWP_INS		0x80	/* ENUM# status - insertion */
-
-/* PCI Advanced Feature registers */
-
-#define PCI_AF_LENGTH		2
-#define PCI_AF_CAP		3
-#define  PCI_AF_CAP_TP		0x01
-#define  PCI_AF_CAP_FLR		0x02
-#define PCI_AF_CTRL		4
-#define  PCI_AF_CTRL_FLR	0x01
-#define PCI_AF_STATUS		5
-#define  PCI_AF_STATUS_TP	0x01
-#define PCI_CAP_AF_SIZEOF	6	/* size of AF registers */
-
-/* PCI-X registers */
-
-#define PCI_X_CMD		2	/* Modes & Features */
-#define  PCI_X_CMD_DPERR_E	0x0001	/* Data Parity Error Recovery Enable */
-#define  PCI_X_CMD_ERO		0x0002	/* Enable Relaxed Ordering */
-#define  PCI_X_CMD_READ_512	0x0000	/* 512 byte maximum read byte count */
-#define  PCI_X_CMD_READ_1K	0x0004	/* 1Kbyte maximum read byte count */
-#define  PCI_X_CMD_READ_2K	0x0008	/* 2Kbyte maximum read byte count */
-#define  PCI_X_CMD_READ_4K	0x000c	/* 4Kbyte maximum read byte count */
-#define  PCI_X_CMD_MAX_READ	0x000c	/* Max Memory Read Byte Count */
-				/* Max # of outstanding split transactions */
-#define  PCI_X_CMD_SPLIT_1	0x0000	/* Max 1 */
-#define  PCI_X_CMD_SPLIT_2	0x0010	/* Max 2 */
-#define  PCI_X_CMD_SPLIT_3	0x0020	/* Max 3 */
-#define  PCI_X_CMD_SPLIT_4	0x0030	/* Max 4 */
-#define  PCI_X_CMD_SPLIT_8	0x0040	/* Max 8 */
-#define  PCI_X_CMD_SPLIT_12	0x0050	/* Max 12 */
-#define  PCI_X_CMD_SPLIT_16	0x0060	/* Max 16 */
-#define  PCI_X_CMD_SPLIT_32	0x0070	/* Max 32 */
-#define  PCI_X_CMD_MAX_SPLIT	0x0070	/* Max Outstanding Split Transactions */
-#define  PCI_X_CMD_VERSION(x) 	(((x) >> 12) & 3) /* Version */
-#define PCI_X_STATUS		4	/* PCI-X capabilities */
-#define  PCI_X_STATUS_DEVFN	0x000000ff	/* A copy of devfn */
-#define  PCI_X_STATUS_BUS	0x0000ff00	/* A copy of bus nr */
-#define  PCI_X_STATUS_64BIT	0x00010000	/* 64-bit device */
-#define  PCI_X_STATUS_133MHZ	0x00020000	/* 133 MHz capable */
-#define  PCI_X_STATUS_SPL_DISC	0x00040000	/* Split Completion Discarded */
-#define  PCI_X_STATUS_UNX_SPL	0x00080000	/* Unexpected Split Completion */
-#define  PCI_X_STATUS_COMPLEX	0x00100000	/* Device Complexity */
-#define  PCI_X_STATUS_MAX_READ	0x00600000	/* Designed Max Memory Read Count */
-#define  PCI_X_STATUS_MAX_SPLIT	0x03800000	/* Designed Max Outstanding Split Transactions */
-#define  PCI_X_STATUS_MAX_CUM	0x1c000000	/* Designed Max Cumulative Read Size */
-#define  PCI_X_STATUS_SPL_ERR	0x20000000	/* Rcvd Split Completion Error Msg */
-#define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
-#define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */
-#define PCI_X_ECC_CSR		8	/* ECC control and status */
-#define PCI_CAP_PCIX_SIZEOF_V0	8	/* size of registers for Version 0 */
-#define PCI_CAP_PCIX_SIZEOF_V1	24	/* size for Version 1 */
-#define PCI_CAP_PCIX_SIZEOF_V2	PCI_CAP_PCIX_SIZEOF_V1	/* Same for v2 */
-
-/* PCI Bridge Subsystem ID registers */
-
-#define PCI_SSVID_VENDOR_ID     4	/* PCI-Bridge subsystem vendor id register */
-#define PCI_SSVID_DEVICE_ID     6	/* PCI-Bridge subsystem device id register */
-
-/* PCI Express capability registers */
-
-#define PCI_EXP_FLAGS		2	/* Capabilities register */
-#define PCI_EXP_FLAGS_VERS	0x000f	/* Capability version */
-#define PCI_EXP_FLAGS_TYPE	0x00f0	/* Device/Port type */
-#define  PCI_EXP_TYPE_ENDPOINT	0x0	/* Express Endpoint */
-#define  PCI_EXP_TYPE_LEG_END	0x1	/* Legacy Endpoint */
-#define  PCI_EXP_TYPE_ROOT_PORT 0x4	/* Root Port */
-#define  PCI_EXP_TYPE_UPSTREAM	0x5	/* Upstream Port */
-#define  PCI_EXP_TYPE_DOWNSTREAM 0x6	/* Downstream Port */
-#define  PCI_EXP_TYPE_PCI_BRIDGE 0x7	/* PCI/PCI-X Bridge */
-#define  PCI_EXP_TYPE_PCIE_BRIDGE 0x8	/* PCI/PCI-X to PCIE Bridge */
-#define  PCI_EXP_TYPE_RC_END	0x9	/* Root Complex Integrated Endpoint */
-#define  PCI_EXP_TYPE_RC_EC	0xa	/* Root Complex Event Collector */
-#define PCI_EXP_FLAGS_SLOT	0x0100	/* Slot implemented */
-#define PCI_EXP_FLAGS_IRQ	0x3e00	/* Interrupt message number */
-#define PCI_EXP_DEVCAP		4	/* Device capabilities */
-#define  PCI_EXP_DEVCAP_PAYLOAD	0x07	/* Max_Payload_Size */
-#define  PCI_EXP_DEVCAP_PHANTOM	0x18	/* Phantom functions */
-#define  PCI_EXP_DEVCAP_EXT_TAG	0x20	/* Extended tags */
-#define  PCI_EXP_DEVCAP_L0S	0x1c0	/* L0s Acceptable Latency */
-#define  PCI_EXP_DEVCAP_L1	0xe00	/* L1 Acceptable Latency */
-#define  PCI_EXP_DEVCAP_ATN_BUT	0x1000	/* Attention Button Present */
-#define  PCI_EXP_DEVCAP_ATN_IND	0x2000	/* Attention Indicator Present */
-#define  PCI_EXP_DEVCAP_PWR_IND	0x4000	/* Power Indicator Present */
-#define  PCI_EXP_DEVCAP_RBER	0x8000	/* Role-Based Error Reporting */
-#define  PCI_EXP_DEVCAP_PWR_VAL	0x3fc0000 /* Slot Power Limit Value */
-#define  PCI_EXP_DEVCAP_PWR_SCL	0xc000000 /* Slot Power Limit Scale */
-#define  PCI_EXP_DEVCAP_FLR     0x10000000 /* Function Level Reset */
-#define PCI_EXP_DEVCTL		8	/* Device Control */
-#define  PCI_EXP_DEVCTL_CERE	0x0001	/* Correctable Error Reporting En. */
-#define  PCI_EXP_DEVCTL_NFERE	0x0002	/* Non-Fatal Error Reporting Enable */
-#define  PCI_EXP_DEVCTL_FERE	0x0004	/* Fatal Error Reporting Enable */
-#define  PCI_EXP_DEVCTL_URRE	0x0008	/* Unsupported Request Reporting En. */
-#define  PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
-#define  PCI_EXP_DEVCTL_PAYLOAD	0x00e0	/* Max_Payload_Size */
-#define  PCI_EXP_DEVCTL_EXT_TAG	0x0100	/* Extended Tag Field Enable */
-#define  PCI_EXP_DEVCTL_PHANTOM	0x0200	/* Phantom Functions Enable */
-#define  PCI_EXP_DEVCTL_AUX_PME	0x0400	/* Auxiliary Power PM Enable */
-#define  PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800  /* Enable No Snoop */
-#define  PCI_EXP_DEVCTL_READRQ	0x7000	/* Max_Read_Request_Size */
-#define  PCI_EXP_DEVCTL_BCR_FLR 0x8000  /* Bridge Configuration Retry / FLR */
-#define PCI_EXP_DEVSTA		10	/* Device Status */
-#define  PCI_EXP_DEVSTA_CED	0x01	/* Correctable Error Detected */
-#define  PCI_EXP_DEVSTA_NFED	0x02	/* Non-Fatal Error Detected */
-#define  PCI_EXP_DEVSTA_FED	0x04	/* Fatal Error Detected */
-#define  PCI_EXP_DEVSTA_URD	0x08	/* Unsupported Request Detected */
-#define  PCI_EXP_DEVSTA_AUXPD	0x10	/* AUX Power Detected */
-#define  PCI_EXP_DEVSTA_TRPND	0x20	/* Transactions Pending */
-#define PCI_EXP_LNKCAP		12	/* Link Capabilities */
-#define  PCI_EXP_LNKCAP_SLS	0x0000000f /* Supported Link Speeds */
-#define  PCI_EXP_LNKCAP_MLW	0x000003f0 /* Maximum Link Width */
-#define  PCI_EXP_LNKCAP_ASPMS	0x00000c00 /* ASPM Support */
-#define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
-#define  PCI_EXP_LNKCAP_L1EL	0x00038000 /* L1 Exit Latency */
-#define  PCI_EXP_LNKCAP_CLKPM	0x00040000 /* L1 Clock Power Management */
-#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Surprise Down Error Reporting Capable */
-#define  PCI_EXP_LNKCAP_DLLLARC	0x00100000 /* Data Link Layer Link Active Reporting Capable */
-#define  PCI_EXP_LNKCAP_LBNC	0x00200000 /* Link Bandwidth Notification Capability */
-#define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
-#define PCI_EXP_LNKCTL		16	/* Link Control */
-#define  PCI_EXP_LNKCTL_ASPMC	0x0003	/* ASPM Control */
-#define  PCI_EXP_LNKCTL_RCB	0x0008	/* Read Completion Boundary */
-#define  PCI_EXP_LNKCTL_LD	0x0010	/* Link Disable */
-#define  PCI_EXP_LNKCTL_RL	0x0020	/* Retrain Link */
-#define  PCI_EXP_LNKCTL_CCC	0x0040	/* Common Clock Configuration */
-#define  PCI_EXP_LNKCTL_ES	0x0080	/* Extended Synch */
-#define  PCI_EXP_LNKCTL_CLKREQ_EN 0x100	/* Enable clkreq */
-#define  PCI_EXP_LNKCTL_HAWD	0x0200	/* Hardware Autonomous Width Disable */
-#define  PCI_EXP_LNKCTL_LBMIE	0x0400	/* Link Bandwidth Management Interrupt Enable */
-#define  PCI_EXP_LNKCTL_LABIE	0x0800	/* Lnk Autonomous Bandwidth Interrupt Enable */
-#define PCI_EXP_LNKSTA		18	/* Link Status */
-#define  PCI_EXP_LNKSTA_CLS	0x000f	/* Current Link Speed */
-#define  PCI_EXP_LNKSTA_CLS_2_5GB 0x01	/* Current Link Speed 2.5GT/s */
-#define  PCI_EXP_LNKSTA_CLS_5_0GB 0x02	/* Current Link Speed 5.0GT/s */
-#define  PCI_EXP_LNKSTA_NLW	0x03f0	/* Nogotiated Link Width */
-#define  PCI_EXP_LNKSTA_NLW_SHIFT 4	/* start of NLW mask in link status */
-#define  PCI_EXP_LNKSTA_LT	0x0800	/* Link Training */
-#define  PCI_EXP_LNKSTA_SLC	0x1000	/* Slot Clock Configuration */
-#define  PCI_EXP_LNKSTA_DLLLA	0x2000	/* Data Link Layer Link Active */
-#define  PCI_EXP_LNKSTA_LBMS	0x4000	/* Link Bandwidth Management Status */
-#define  PCI_EXP_LNKSTA_LABS	0x8000	/* Link Autonomous Bandwidth Status */
-#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1	20	/* v1 endpoints end here */
-#define PCI_EXP_SLTCAP		20	/* Slot Capabilities */
-#define  PCI_EXP_SLTCAP_ABP	0x00000001 /* Attention Button Present */
-#define  PCI_EXP_SLTCAP_PCP	0x00000002 /* Power Controller Present */
-#define  PCI_EXP_SLTCAP_MRLSP	0x00000004 /* MRL Sensor Present */
-#define  PCI_EXP_SLTCAP_AIP	0x00000008 /* Attention Indicator Present */
-#define  PCI_EXP_SLTCAP_PIP	0x00000010 /* Power Indicator Present */
-#define  PCI_EXP_SLTCAP_HPS	0x00000020 /* Hot-Plug Surprise */
-#define  PCI_EXP_SLTCAP_HPC	0x00000040 /* Hot-Plug Capable */
-#define  PCI_EXP_SLTCAP_SPLV	0x00007f80 /* Slot Power Limit Value */
-#define  PCI_EXP_SLTCAP_SPLS	0x00018000 /* Slot Power Limit Scale */
-#define  PCI_EXP_SLTCAP_EIP	0x00020000 /* Electromechanical Interlock Present */
-#define  PCI_EXP_SLTCAP_NCCS	0x00040000 /* No Command Completed Support */
-#define  PCI_EXP_SLTCAP_PSN	0xfff80000 /* Physical Slot Number */
-#define PCI_EXP_SLTCTL		24	/* Slot Control */
-#define  PCI_EXP_SLTCTL_ABPE	0x0001	/* Attention Button Pressed Enable */
-#define  PCI_EXP_SLTCTL_PFDE	0x0002	/* Power Fault Detected Enable */
-#define  PCI_EXP_SLTCTL_MRLSCE	0x0004	/* MRL Sensor Changed Enable */
-#define  PCI_EXP_SLTCTL_PDCE	0x0008	/* Presence Detect Changed Enable */
-#define  PCI_EXP_SLTCTL_CCIE	0x0010	/* Command Completed Interrupt Enable */
-#define  PCI_EXP_SLTCTL_HPIE	0x0020	/* Hot-Plug Interrupt Enable */
-#define  PCI_EXP_SLTCTL_AIC	0x00c0	/* Attention Indicator Control */
-#define  PCI_EXP_SLTCTL_PIC	0x0300	/* Power Indicator Control */
-#define  PCI_EXP_SLTCTL_PCC	0x0400	/* Power Controller Control */
-#define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
-#define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
-#define PCI_EXP_SLTSTA		26	/* Slot Status */
-#define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */
-#define  PCI_EXP_SLTSTA_PFD	0x0002	/* Power Fault Detected */
-#define  PCI_EXP_SLTSTA_MRLSC	0x0004	/* MRL Sensor Changed */
-#define  PCI_EXP_SLTSTA_PDC	0x0008	/* Presence Detect Changed */
-#define  PCI_EXP_SLTSTA_CC	0x0010	/* Command Completed */
-#define  PCI_EXP_SLTSTA_MRLSS	0x0020	/* MRL Sensor State */
-#define  PCI_EXP_SLTSTA_PDS	0x0040	/* Presence Detect State */
-#define  PCI_EXP_SLTSTA_EIS	0x0080	/* Electromechanical Interlock Status */
-#define  PCI_EXP_SLTSTA_DLLSC	0x0100	/* Data Link Layer State Changed */
-#define PCI_EXP_RTCTL		28	/* Root Control */
-#define  PCI_EXP_RTCTL_SECEE	0x01	/* System Error on Correctable Error */
-#define  PCI_EXP_RTCTL_SENFEE	0x02	/* System Error on Non-Fatal Error */
-#define  PCI_EXP_RTCTL_SEFEE	0x04	/* System Error on Fatal Error */
-#define  PCI_EXP_RTCTL_PMEIE	0x08	/* PME Interrupt Enable */
-#define  PCI_EXP_RTCTL_CRSSVE	0x10	/* CRS Software Visibility Enable */
-#define PCI_EXP_RTCAP		30	/* Root Capabilities */
-#define PCI_EXP_RTSTA		32	/* Root Status */
-#define PCI_EXP_RTSTA_PME	0x10000 /* PME status */
-#define PCI_EXP_RTSTA_PENDING	0x20000 /* PME pending */
-/*
- * Note that the following PCI Express 'Capability Structure' registers
- * were introduced with 'Capability Version' 0x2 (v2).  These registers
- * do not exist on devices with Capability Version 1.  Use pci_pcie_cap2()
- * to use these fields safely.
- */
-#define PCI_EXP_DEVCAP2		36	/* Device Capabilities 2 */
-#define  PCI_EXP_DEVCAP2_ARI	0x20	/* Alternative Routing-ID */
-#define  PCI_EXP_DEVCAP2_LTR	0x800	/* Latency tolerance reporting */
-#define  PCI_EXP_OBFF_MASK	0xc0000 /* OBFF support mechanism */
-#define  PCI_EXP_OBFF_MSG	0x40000 /* New message signaling */
-#define  PCI_EXP_OBFF_WAKE	0x80000 /* Re-use WAKE# for OBFF */
-#define PCI_EXP_DEVCTL2		40	/* Device Control 2 */
-#define  PCI_EXP_DEVCTL2_ARI	0x20	/* Alternative Routing-ID */
-#define  PCI_EXP_IDO_REQ_EN	0x100	/* ID-based ordering request enable */
-#define  PCI_EXP_IDO_CMP_EN	0x200	/* ID-based ordering completion enable */
-#define  PCI_EXP_LTR_EN		0x400	/* Latency tolerance reporting */
-#define  PCI_EXP_OBFF_MSGA_EN	0x2000	/* OBFF enable with Message type A */
-#define  PCI_EXP_OBFF_MSGB_EN	0x4000	/* OBFF enable with Message type B */
-#define  PCI_EXP_OBFF_WAKE_EN	0x6000	/* OBFF using WAKE# signaling */
-#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	44	/* v2 endpoints end here */
-#define PCI_EXP_LNKCAP2		44	/* Link Capability 2 */
-#define  PCI_EXP_LNKCAP2_SLS_2_5GB 0x01	/* Current Link Speed 2.5GT/s */
-#define  PCI_EXP_LNKCAP2_SLS_5_0GB 0x02	/* Current Link Speed 5.0GT/s */
-#define  PCI_EXP_LNKCAP2_SLS_8_0GB 0x04	/* Current Link Speed 8.0GT/s */
-#define  PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */
-#define PCI_EXP_LNKCTL2		48	/* Link Control 2 */
-#define PCI_EXP_LNKSTA2		50	/* Link Status 2 */
-#define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
-
-/* Extended Capabilities (PCI-X 2.0 and Express) */
-#define PCI_EXT_CAP_ID(header)		(header & 0x0000ffff)
-#define PCI_EXT_CAP_VER(header)		((header >> 16) & 0xf)
-#define PCI_EXT_CAP_NEXT(header)	((header >> 20) & 0xffc)
-
-#define PCI_EXT_CAP_ID_ERR	0x01	/* Advanced Error Reporting */
-#define PCI_EXT_CAP_ID_VC	0x02	/* Virtual Channel Capability */
-#define PCI_EXT_CAP_ID_DSN	0x03	/* Device Serial Number */
-#define PCI_EXT_CAP_ID_PWR	0x04	/* Power Budgeting */
-#define PCI_EXT_CAP_ID_RCLD	0x05	/* Root Complex Link Declaration */
-#define PCI_EXT_CAP_ID_RCILC	0x06	/* Root Complex Internal Link Control */
-#define PCI_EXT_CAP_ID_RCEC	0x07	/* Root Complex Event Collector */
-#define PCI_EXT_CAP_ID_MFVC	0x08	/* Multi-Function VC Capability */
-#define PCI_EXT_CAP_ID_VC9	0x09	/* same as _VC */
-#define PCI_EXT_CAP_ID_RCRB	0x0A	/* Root Complex RB? */
-#define PCI_EXT_CAP_ID_VNDR	0x0B	/* Vendor Specific */
-#define PCI_EXT_CAP_ID_CAC	0x0C	/* Config Access - obsolete */
-#define PCI_EXT_CAP_ID_ACS	0x0D	/* Access Control Services */
-#define PCI_EXT_CAP_ID_ARI	0x0E	/* Alternate Routing ID */
-#define PCI_EXT_CAP_ID_ATS	0x0F	/* Address Translation Services */
-#define PCI_EXT_CAP_ID_SRIOV	0x10	/* Single Root I/O Virtualization */
-#define PCI_EXT_CAP_ID_MRIOV	0x11	/* Multi Root I/O Virtualization */
-#define PCI_EXT_CAP_ID_MCAST	0x12	/* Multicast */
-#define PCI_EXT_CAP_ID_PRI	0x13	/* Page Request Interface */
-#define PCI_EXT_CAP_ID_AMD_XXX	0x14	/* reserved for AMD */
-#define PCI_EXT_CAP_ID_REBAR	0x15	/* resizable BAR */
-#define PCI_EXT_CAP_ID_DPA	0x16	/* dynamic power alloc */
-#define PCI_EXT_CAP_ID_TPH	0x17	/* TPH request */
-#define PCI_EXT_CAP_ID_LTR	0x18	/* latency tolerance reporting */
-#define PCI_EXT_CAP_ID_SECPCI	0x19	/* Secondary PCIe */
-#define PCI_EXT_CAP_ID_PMUX	0x1A	/* Protocol Multiplexing */
-#define PCI_EXT_CAP_ID_PASID	0x1B	/* Process Address Space ID */
-#define PCI_EXT_CAP_ID_MAX	PCI_EXT_CAP_ID_PASID
-
-#define PCI_EXT_CAP_DSN_SIZEOF	12
-#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
-
-/* Advanced Error Reporting */
-#define PCI_ERR_UNCOR_STATUS	4	/* Uncorrectable Error Status */
-#define  PCI_ERR_UNC_TRAIN	0x00000001	/* Training */
-#define  PCI_ERR_UNC_DLP	0x00000010	/* Data Link Protocol */
-#define  PCI_ERR_UNC_SURPDN	0x00000020	/* Surprise Down */
-#define  PCI_ERR_UNC_POISON_TLP	0x00001000	/* Poisoned TLP */
-#define  PCI_ERR_UNC_FCP	0x00002000	/* Flow Control Protocol */
-#define  PCI_ERR_UNC_COMP_TIME	0x00004000	/* Completion Timeout */
-#define  PCI_ERR_UNC_COMP_ABORT	0x00008000	/* Completer Abort */
-#define  PCI_ERR_UNC_UNX_COMP	0x00010000	/* Unexpected Completion */
-#define  PCI_ERR_UNC_RX_OVER	0x00020000	/* Receiver Overflow */
-#define  PCI_ERR_UNC_MALF_TLP	0x00040000	/* Malformed TLP */
-#define  PCI_ERR_UNC_ECRC	0x00080000	/* ECRC Error Status */
-#define  PCI_ERR_UNC_UNSUP	0x00100000	/* Unsupported Request */
-#define  PCI_ERR_UNC_ACSV	0x00200000	/* ACS Violation */
-#define  PCI_ERR_UNC_INTN	0x00400000	/* internal error */
-#define  PCI_ERR_UNC_MCBTLP	0x00800000	/* MC blocked TLP */
-#define  PCI_ERR_UNC_ATOMEG	0x01000000	/* Atomic egress blocked */
-#define  PCI_ERR_UNC_TLPPRE	0x02000000	/* TLP prefix blocked */
-#define PCI_ERR_UNCOR_MASK	8	/* Uncorrectable Error Mask */
-	/* Same bits as above */
-#define PCI_ERR_UNCOR_SEVER	12	/* Uncorrectable Error Severity */
-	/* Same bits as above */
-#define PCI_ERR_COR_STATUS	16	/* Correctable Error Status */
-#define  PCI_ERR_COR_RCVR	0x00000001	/* Receiver Error Status */
-#define  PCI_ERR_COR_BAD_TLP	0x00000040	/* Bad TLP Status */
-#define  PCI_ERR_COR_BAD_DLLP	0x00000080	/* Bad DLLP Status */
-#define  PCI_ERR_COR_REP_ROLL	0x00000100	/* REPLAY_NUM Rollover */
-#define  PCI_ERR_COR_REP_TIMER	0x00001000	/* Replay Timer Timeout */
-#define  PCI_ERR_COR_ADV_NFAT	0x00002000	/* Advisory Non-Fatal */
-#define  PCI_ERR_COR_INTERNAL	0x00004000	/* Corrected Internal */
-#define  PCI_ERR_COR_LOG_OVER	0x00008000	/* Header Log Overflow */
-#define PCI_ERR_COR_MASK	20	/* Correctable Error Mask */
-	/* Same bits as above */
-#define PCI_ERR_CAP		24	/* Advanced Error Capabilities */
-#define  PCI_ERR_CAP_FEP(x)	((x) & 31)	/* First Error Pointer */
-#define  PCI_ERR_CAP_ECRC_GENC	0x00000020	/* ECRC Generation Capable */
-#define  PCI_ERR_CAP_ECRC_GENE	0x00000040	/* ECRC Generation Enable */
-#define  PCI_ERR_CAP_ECRC_CHKC	0x00000080	/* ECRC Check Capable */
-#define  PCI_ERR_CAP_ECRC_CHKE	0x00000100	/* ECRC Check Enable */
-#define PCI_ERR_HEADER_LOG	28	/* Header Log Register (16 bytes) */
-#define PCI_ERR_ROOT_COMMAND	44	/* Root Error Command */
-/* Correctable Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_COR_EN		0x00000001
-/* Non-fatal Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_NONFATAL_EN	0x00000002
-/* Fatal Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_FATAL_EN	0x00000004
-#define PCI_ERR_ROOT_STATUS	48
-#define PCI_ERR_ROOT_COR_RCV		0x00000001	/* ERR_COR Received */
-/* Multi ERR_COR Received */
-#define PCI_ERR_ROOT_MULTI_COR_RCV	0x00000002
-/* ERR_FATAL/NONFATAL Recevied */
-#define PCI_ERR_ROOT_UNCOR_RCV		0x00000004
-/* Multi ERR_FATAL/NONFATAL Recevied */
-#define PCI_ERR_ROOT_MULTI_UNCOR_RCV	0x00000008
-#define PCI_ERR_ROOT_FIRST_FATAL	0x00000010	/* First Fatal */
-#define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020	/* Non-Fatal Received */
-#define PCI_ERR_ROOT_FATAL_RCV		0x00000040	/* Fatal Received */
-#define PCI_ERR_ROOT_ERR_SRC	52	/* Error Source Identification */
-
-/* Virtual Channel */
-#define PCI_VC_PORT_REG1	4
-#define  PCI_VC_REG1_EVCC	0x7	/* extended vc count */
-#define PCI_VC_PORT_REG2	8
-#define  PCI_VC_REG2_32_PHASE	0x2
-#define  PCI_VC_REG2_64_PHASE	0x4
-#define  PCI_VC_REG2_128_PHASE	0x8
-#define PCI_VC_PORT_CTRL	12
-#define PCI_VC_PORT_STATUS	14
-#define PCI_VC_RES_CAP		16
-#define PCI_VC_RES_CTRL		20
-#define PCI_VC_RES_STATUS	26
-#define PCI_CAP_VC_BASE_SIZEOF		0x10
-#define PCI_CAP_VC_PER_VC_SIZEOF	0x0C
-
-/* Power Budgeting */
-#define PCI_PWR_DSR		4	/* Data Select Register */
-#define PCI_PWR_DATA		8	/* Data Register */
-#define  PCI_PWR_DATA_BASE(x)	((x) & 0xff)	    /* Base Power */
-#define  PCI_PWR_DATA_SCALE(x)	(((x) >> 8) & 3)    /* Data Scale */
-#define  PCI_PWR_DATA_PM_SUB(x)	(((x) >> 10) & 7)   /* PM Sub State */
-#define  PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
-#define  PCI_PWR_DATA_TYPE(x)	(((x) >> 15) & 7)   /* Type */
-#define  PCI_PWR_DATA_RAIL(x)	(((x) >> 18) & 7)   /* Power Rail */
-#define PCI_PWR_CAP		12	/* Capability */
-#define  PCI_PWR_CAP_BUDGET(x)	((x) & 1)	/* Included in system budget */
-#define PCI_EXT_CAP_PWR_SIZEOF	16
-
-/* Vendor-Specific (VSEC, PCI_EXT_CAP_ID_VNDR) */
-#define PCI_VNDR_HEADER		4	/* Vendor-Specific Header */
-#define  PCI_VNDR_HEADER_ID(x)	((x) & 0xffff)
-#define  PCI_VNDR_HEADER_REV(x)	(((x) >> 16) & 0xf)
-#define  PCI_VNDR_HEADER_LEN(x)	(((x) >> 20) & 0xfff)
-
-/*
- * Hypertransport sub capability types
- *
- * Unfortunately there are both 3 bit and 5 bit capability types defined
- * in the HT spec, catering for that is a little messy. You probably don't
- * want to use these directly, just use pci_find_ht_capability() and it
- * will do the right thing for you.
- */
-#define HT_3BIT_CAP_MASK	0xE0
-#define HT_CAPTYPE_SLAVE	0x00	/* Slave/Primary link configuration */
-#define HT_CAPTYPE_HOST		0x20	/* Host/Secondary link configuration */
-
-#define HT_5BIT_CAP_MASK	0xF8
-#define HT_CAPTYPE_IRQ		0x80	/* IRQ Configuration */
-#define HT_CAPTYPE_REMAPPING_40	0xA0	/* 40 bit address remapping */
-#define HT_CAPTYPE_REMAPPING_64 0xA2	/* 64 bit address remapping */
-#define HT_CAPTYPE_UNITID_CLUMP	0x90	/* Unit ID clumping */
-#define HT_CAPTYPE_EXTCONF	0x98	/* Extended Configuration Space Access */
-#define HT_CAPTYPE_MSI_MAPPING	0xA8	/* MSI Mapping Capability */
-#define  HT_MSI_FLAGS		0x02		/* Offset to flags */
-#define  HT_MSI_FLAGS_ENABLE	0x1		/* Mapping enable */
-#define  HT_MSI_FLAGS_FIXED	0x2		/* Fixed mapping only */
-#define  HT_MSI_FIXED_ADDR	0x00000000FEE00000ULL	/* Fixed addr */
-#define  HT_MSI_ADDR_LO		0x04		/* Offset to low addr bits */
-#define  HT_MSI_ADDR_LO_MASK	0xFFF00000	/* Low address bit mask */
-#define  HT_MSI_ADDR_HI		0x08		/* Offset to high addr bits */
-#define HT_CAPTYPE_DIRECT_ROUTE	0xB0	/* Direct routing configuration */
-#define HT_CAPTYPE_VCSET	0xB8	/* Virtual Channel configuration */
-#define HT_CAPTYPE_ERROR_RETRY	0xC0	/* Retry on error configuration */
-#define HT_CAPTYPE_GEN3		0xD0	/* Generation 3 hypertransport configuration */
-#define HT_CAPTYPE_PM		0xE0	/* Hypertransport powermanagement configuration */
-#define HT_CAP_SIZEOF_LONG	28	/* slave & primary */
-#define HT_CAP_SIZEOF_SHORT	24	/* host & secondary */
-
-/* Alternative Routing-ID Interpretation */
-#define PCI_ARI_CAP		0x04	/* ARI Capability Register */
-#define  PCI_ARI_CAP_MFVC	0x0001	/* MFVC Function Groups Capability */
-#define  PCI_ARI_CAP_ACS	0x0002	/* ACS Function Groups Capability */
-#define  PCI_ARI_CAP_NFN(x)	(((x) >> 8) & 0xff) /* Next Function Number */
-#define PCI_ARI_CTRL		0x06	/* ARI Control Register */
-#define  PCI_ARI_CTRL_MFVC	0x0001	/* MFVC Function Groups Enable */
-#define  PCI_ARI_CTRL_ACS	0x0002	/* ACS Function Groups Enable */
-#define  PCI_ARI_CTRL_FG(x)	(((x) >> 4) & 7) /* Function Group */
-#define PCI_EXT_CAP_ARI_SIZEOF	8
-
-/* Address Translation Service */
-#define PCI_ATS_CAP		0x04	/* ATS Capability Register */
-#define  PCI_ATS_CAP_QDEP(x)	((x) & 0x1f)	/* Invalidate Queue Depth */
-#define  PCI_ATS_MAX_QDEP	32	/* Max Invalidate Queue Depth */
-#define PCI_ATS_CTRL		0x06	/* ATS Control Register */
-#define  PCI_ATS_CTRL_ENABLE	0x8000	/* ATS Enable */
-#define  PCI_ATS_CTRL_STU(x)	((x) & 0x1f)	/* Smallest Translation Unit */
-#define  PCI_ATS_MIN_STU	12	/* shift of minimum STU block */
-#define PCI_EXT_CAP_ATS_SIZEOF	8
-
-/* Page Request Interface */
-#define PCI_PRI_CTRL		0x04	/* PRI control register */
-#define  PCI_PRI_CTRL_ENABLE	0x01	/* Enable */
-#define  PCI_PRI_CTRL_RESET	0x02	/* Reset */
-#define PCI_PRI_STATUS		0x06	/* PRI status register */
-#define  PCI_PRI_STATUS_RF	0x001	/* Response Failure */
-#define  PCI_PRI_STATUS_UPRGI	0x002	/* Unexpected PRG index */
-#define  PCI_PRI_STATUS_STOPPED	0x100	/* PRI Stopped */
-#define PCI_PRI_MAX_REQ		0x08	/* PRI max reqs supported */
-#define PCI_PRI_ALLOC_REQ	0x0c	/* PRI max reqs allowed */
-#define PCI_EXT_CAP_PRI_SIZEOF	16
-
-/* PASID capability */
-#define PCI_PASID_CAP		0x04    /* PASID feature register */
-#define  PCI_PASID_CAP_EXEC	0x02	/* Exec permissions Supported */
-#define  PCI_PASID_CAP_PRIV	0x04	/* Priviledge Mode Supported */
-#define PCI_PASID_CTRL		0x06    /* PASID control register */
-#define  PCI_PASID_CTRL_ENABLE	0x01	/* Enable bit */
-#define  PCI_PASID_CTRL_EXEC	0x02	/* Exec permissions Enable */
-#define  PCI_PASID_CTRL_PRIV	0x04	/* Priviledge Mode Enable */
-#define PCI_EXT_CAP_PASID_SIZEOF	8
-
-/* Single Root I/O Virtualization */
-#define PCI_SRIOV_CAP		0x04	/* SR-IOV Capabilities */
-#define  PCI_SRIOV_CAP_VFM	0x01	/* VF Migration Capable */
-#define  PCI_SRIOV_CAP_INTR(x)	((x) >> 21) /* Interrupt Message Number */
-#define PCI_SRIOV_CTRL		0x08	/* SR-IOV Control */
-#define  PCI_SRIOV_CTRL_VFE	0x01	/* VF Enable */
-#define  PCI_SRIOV_CTRL_VFM	0x02	/* VF Migration Enable */
-#define  PCI_SRIOV_CTRL_INTR	0x04	/* VF Migration Interrupt Enable */
-#define  PCI_SRIOV_CTRL_MSE	0x08	/* VF Memory Space Enable */
-#define  PCI_SRIOV_CTRL_ARI	0x10	/* ARI Capable Hierarchy */
-#define PCI_SRIOV_STATUS	0x0a	/* SR-IOV Status */
-#define  PCI_SRIOV_STATUS_VFM	0x01	/* VF Migration Status */
-#define PCI_SRIOV_INITIAL_VF	0x0c	/* Initial VFs */
-#define PCI_SRIOV_TOTAL_VF	0x0e	/* Total VFs */
-#define PCI_SRIOV_NUM_VF	0x10	/* Number of VFs */
-#define PCI_SRIOV_FUNC_LINK	0x12	/* Function Dependency Link */
-#define PCI_SRIOV_VF_OFFSET	0x14	/* First VF Offset */
-#define PCI_SRIOV_VF_STRIDE	0x16	/* Following VF Stride */
-#define PCI_SRIOV_VF_DID	0x1a	/* VF Device ID */
-#define PCI_SRIOV_SUP_PGSIZE	0x1c	/* Supported Page Sizes */
-#define PCI_SRIOV_SYS_PGSIZE	0x20	/* System Page Size */
-#define PCI_SRIOV_BAR		0x24	/* VF BAR0 */
-#define  PCI_SRIOV_NUM_BARS	6	/* Number of VF BARs */
-#define PCI_SRIOV_VFM		0x3c	/* VF Migration State Array Offset*/
-#define  PCI_SRIOV_VFM_BIR(x)	((x) & 7)	/* State BIR */
-#define  PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7)	/* State Offset */
-#define  PCI_SRIOV_VFM_UA	0x0	/* Inactive.Unavailable */
-#define  PCI_SRIOV_VFM_MI	0x1	/* Dormant.MigrateIn */
-#define  PCI_SRIOV_VFM_MO	0x2	/* Active.MigrateOut */
-#define  PCI_SRIOV_VFM_AV	0x3	/* Active.Available */
-#define PCI_EXT_CAP_SRIOV_SIZEOF 64
-
-#define PCI_LTR_MAX_SNOOP_LAT	0x4
-#define PCI_LTR_MAX_NOSNOOP_LAT	0x6
-#define  PCI_LTR_VALUE_MASK	0x000003ff
-#define  PCI_LTR_SCALE_MASK	0x00001c00
-#define  PCI_LTR_SCALE_SHIFT	10
-#define PCI_EXT_CAP_LTR_SIZEOF	8
-
-/* Access Control Service */
-#define PCI_ACS_CAP		0x04	/* ACS Capability Register */
-#define  PCI_ACS_SV		0x01	/* Source Validation */
-#define  PCI_ACS_TB		0x02	/* Translation Blocking */
-#define  PCI_ACS_RR		0x04	/* P2P Request Redirect */
-#define  PCI_ACS_CR		0x08	/* P2P Completion Redirect */
-#define  PCI_ACS_UF		0x10	/* Upstream Forwarding */
-#define  PCI_ACS_EC		0x20	/* P2P Egress Control */
-#define  PCI_ACS_DT		0x40	/* Direct Translated P2P */
-#define PCI_ACS_EGRESS_BITS	0x05	/* ACS Egress Control Vector Size */
-#define PCI_ACS_CTRL		0x06	/* ACS Control Register */
-#define PCI_ACS_EGRESS_CTL_V	0x08	/* ACS Egress Control Vector */
-
-#define PCI_VSEC_HDR		4	/* extended cap - vendor specific */
-#define  PCI_VSEC_HDR_LEN_SHIFT	20	/* shift for length field */
-
-/* sata capability */
-#define PCI_SATA_REGS		4	/* SATA REGs specifier */
-#define  PCI_SATA_REGS_MASK	0xF	/* location - BAR#/inline */
-#define  PCI_SATA_REGS_INLINE	0xF	/* REGS in config space */
-#define PCI_SATA_SIZEOF_SHORT	8
-#define PCI_SATA_SIZEOF_LONG	16
-
-/* resizable BARs */
-#define PCI_REBAR_CTRL		8	/* control register */
-#define  PCI_REBAR_CTRL_NBAR_MASK	(7 << 5)	/* mask for # bars */
-#define  PCI_REBAR_CTRL_NBAR_SHIFT	5	/* shift for # bars */
-
-/* dynamic power allocation */
-#define PCI_DPA_CAP		4	/* capability register */
-#define  PCI_DPA_CAP_SUBSTATE_MASK	0x1F	/* # substates - 1 */
-#define PCI_DPA_BASE_SIZEOF	16	/* size with 0 substates */
-
-/* TPH Requester */
-#define PCI_TPH_CAP		4	/* capability register */
-#define  PCI_TPH_CAP_LOC_MASK	0x600	/* location mask */
-#define   PCI_TPH_LOC_NONE	0x000	/* no location */
-#define   PCI_TPH_LOC_CAP	0x200	/* in capability */
-#define   PCI_TPH_LOC_MSIX	0x400	/* in MSI-X */
-#define PCI_TPH_CAP_ST_MASK	0x07FF0000	/* st table mask */
-#define PCI_TPH_CAP_ST_SHIFT	16	/* st table shift */
-#define PCI_TPH_BASE_SIZEOF	12	/* size with no st table */
-
-#endif /* LINUX_PCI_REGS_H */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index b4166cdfa7a2..2e902359aee5 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -14,606 +14,9 @@
 #ifndef _LINUX_PERF_EVENT_H
 #define _LINUX_PERF_EVENT_H
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/perf_event.h>
 
 /*
- * User-space ABI bits:
- */
-
-/*
- * attr.type
- */
-enum perf_type_id {
-	PERF_TYPE_HARDWARE			= 0,
-	PERF_TYPE_SOFTWARE			= 1,
-	PERF_TYPE_TRACEPOINT			= 2,
-	PERF_TYPE_HW_CACHE			= 3,
-	PERF_TYPE_RAW				= 4,
-	PERF_TYPE_BREAKPOINT			= 5,
-
-	PERF_TYPE_MAX,				/* non-ABI */
-};
-
-/*
- * Generalized performance event event_id types, used by the
- * attr.event_id parameter of the sys_perf_event_open()
- * syscall:
- */
-enum perf_hw_id {
-	/*
-	 * Common hardware events, generalized by the kernel:
-	 */
-	PERF_COUNT_HW_CPU_CYCLES		= 0,
-	PERF_COUNT_HW_INSTRUCTIONS		= 1,
-	PERF_COUNT_HW_CACHE_REFERENCES		= 2,
-	PERF_COUNT_HW_CACHE_MISSES		= 3,
-	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
-	PERF_COUNT_HW_BRANCH_MISSES		= 5,
-	PERF_COUNT_HW_BUS_CYCLES		= 6,
-	PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	= 7,
-	PERF_COUNT_HW_STALLED_CYCLES_BACKEND	= 8,
-	PERF_COUNT_HW_REF_CPU_CYCLES		= 9,
-
-	PERF_COUNT_HW_MAX,			/* non-ABI */
-};
-
-/*
- * Generalized hardware cache events:
- *
- *       { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
- *       { read, write, prefetch } x
- *       { accesses, misses }
- */
-enum perf_hw_cache_id {
-	PERF_COUNT_HW_CACHE_L1D			= 0,
-	PERF_COUNT_HW_CACHE_L1I			= 1,
-	PERF_COUNT_HW_CACHE_LL			= 2,
-	PERF_COUNT_HW_CACHE_DTLB		= 3,
-	PERF_COUNT_HW_CACHE_ITLB		= 4,
-	PERF_COUNT_HW_CACHE_BPU			= 5,
-	PERF_COUNT_HW_CACHE_NODE		= 6,
-
-	PERF_COUNT_HW_CACHE_MAX,		/* non-ABI */
-};
-
-enum perf_hw_cache_op_id {
-	PERF_COUNT_HW_CACHE_OP_READ		= 0,
-	PERF_COUNT_HW_CACHE_OP_WRITE		= 1,
-	PERF_COUNT_HW_CACHE_OP_PREFETCH		= 2,
-
-	PERF_COUNT_HW_CACHE_OP_MAX,		/* non-ABI */
-};
-
-enum perf_hw_cache_op_result_id {
-	PERF_COUNT_HW_CACHE_RESULT_ACCESS	= 0,
-	PERF_COUNT_HW_CACHE_RESULT_MISS		= 1,
-
-	PERF_COUNT_HW_CACHE_RESULT_MAX,		/* non-ABI */
-};
-
-/*
- * Special "software" events provided by the kernel, even if the hardware
- * does not support performance events. These events measure various
- * physical and sw events of the kernel (and allow the profiling of them as
- * well):
- */
-enum perf_sw_ids {
-	PERF_COUNT_SW_CPU_CLOCK			= 0,
-	PERF_COUNT_SW_TASK_CLOCK		= 1,
-	PERF_COUNT_SW_PAGE_FAULTS		= 2,
-	PERF_COUNT_SW_CONTEXT_SWITCHES		= 3,
-	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
-	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
-	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
-	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
-	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
-
-	PERF_COUNT_SW_MAX,			/* non-ABI */
-};
-
-/*
- * Bits that can be set in attr.sample_type to request information
- * in the overflow packets.
- */
-enum perf_event_sample_format {
-	PERF_SAMPLE_IP				= 1U << 0,
-	PERF_SAMPLE_TID				= 1U << 1,
-	PERF_SAMPLE_TIME			= 1U << 2,
-	PERF_SAMPLE_ADDR			= 1U << 3,
-	PERF_SAMPLE_READ			= 1U << 4,
-	PERF_SAMPLE_CALLCHAIN			= 1U << 5,
-	PERF_SAMPLE_ID				= 1U << 6,
-	PERF_SAMPLE_CPU				= 1U << 7,
-	PERF_SAMPLE_PERIOD			= 1U << 8,
-	PERF_SAMPLE_STREAM_ID			= 1U << 9,
-	PERF_SAMPLE_RAW				= 1U << 10,
-	PERF_SAMPLE_BRANCH_STACK		= 1U << 11,
-	PERF_SAMPLE_REGS_USER			= 1U << 12,
-	PERF_SAMPLE_STACK_USER			= 1U << 13,
-
-	PERF_SAMPLE_MAX = 1U << 14,		/* non-ABI */
-};
-
-/*
- * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
- *
- * If the user does not pass priv level information via branch_sample_type,
- * the kernel uses the event's priv level. Branch and event priv levels do
- * not have to match. Branch priv level is checked for permissions.
- *
- * The branch types can be combined, however BRANCH_ANY covers all types
- * of branches and therefore it supersedes all the other types.
- */
-enum perf_branch_sample_type {
-	PERF_SAMPLE_BRANCH_USER		= 1U << 0, /* user branches */
-	PERF_SAMPLE_BRANCH_KERNEL	= 1U << 1, /* kernel branches */
-	PERF_SAMPLE_BRANCH_HV		= 1U << 2, /* hypervisor branches */
-
-	PERF_SAMPLE_BRANCH_ANY		= 1U << 3, /* any branch types */
-	PERF_SAMPLE_BRANCH_ANY_CALL	= 1U << 4, /* any call branch */
-	PERF_SAMPLE_BRANCH_ANY_RETURN	= 1U << 5, /* any return branch */
-	PERF_SAMPLE_BRANCH_IND_CALL	= 1U << 6, /* indirect calls */
-
-	PERF_SAMPLE_BRANCH_MAX		= 1U << 7, /* non-ABI */
-};
-
-#define PERF_SAMPLE_BRANCH_PLM_ALL \
-	(PERF_SAMPLE_BRANCH_USER|\
-	 PERF_SAMPLE_BRANCH_KERNEL|\
-	 PERF_SAMPLE_BRANCH_HV)
-
-/*
- * Values to determine ABI of the registers dump.
- */
-enum perf_sample_regs_abi {
-	PERF_SAMPLE_REGS_ABI_NONE	= 0,
-	PERF_SAMPLE_REGS_ABI_32		= 1,
-	PERF_SAMPLE_REGS_ABI_64		= 2,
-};
-
-/*
- * The format of the data returned by read() on a perf event fd,
- * as specified by attr.read_format:
- *
- * struct read_format {
- *	{ u64		value;
- *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- *	  { u64		id;           } && PERF_FORMAT_ID
- *	} && !PERF_FORMAT_GROUP
- *
- *	{ u64		nr;
- *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- *	  { u64		value;
- *	    { u64	id;           } && PERF_FORMAT_ID
- *	  }		cntr[nr];
- *	} && PERF_FORMAT_GROUP
- * };
- */
-enum perf_event_read_format {
-	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
-	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
-	PERF_FORMAT_ID				= 1U << 2,
-	PERF_FORMAT_GROUP			= 1U << 3,
-
-	PERF_FORMAT_MAX = 1U << 4,		/* non-ABI */
-};
-
-#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
-#define PERF_ATTR_SIZE_VER1	72	/* add: config2 */
-#define PERF_ATTR_SIZE_VER2	80	/* add: branch_sample_type */
-#define PERF_ATTR_SIZE_VER3	96	/* add: sample_regs_user */
-					/* add: sample_stack_user */
-
-/*
- * Hardware event_id to monitor via a performance monitoring event:
- */
-struct perf_event_attr {
-
-	/*
-	 * Major type: hardware/software/tracepoint/etc.
-	 */
-	__u32			type;
-
-	/*
-	 * Size of the attr structure, for fwd/bwd compat.
-	 */
-	__u32			size;
-
-	/*
-	 * Type specific configuration information.
-	 */
-	__u64			config;
-
-	union {
-		__u64		sample_period;
-		__u64		sample_freq;
-	};
-
-	__u64			sample_type;
-	__u64			read_format;
-
-	__u64			disabled       :  1, /* off by default        */
-				inherit	       :  1, /* children inherit it   */
-				pinned	       :  1, /* must always be on PMU */
-				exclusive      :  1, /* only group on PMU     */
-				exclude_user   :  1, /* don't count user      */
-				exclude_kernel :  1, /* ditto kernel          */
-				exclude_hv     :  1, /* ditto hypervisor      */
-				exclude_idle   :  1, /* don't count when idle */
-				mmap           :  1, /* include mmap data     */
-				comm	       :  1, /* include comm data     */
-				freq           :  1, /* use freq, not period  */
-				inherit_stat   :  1, /* per task counts       */
-				enable_on_exec :  1, /* next exec enables     */
-				task           :  1, /* trace fork/exit       */
-				watermark      :  1, /* wakeup_watermark      */
-				/*
-				 * precise_ip:
-				 *
-				 *  0 - SAMPLE_IP can have arbitrary skid
-				 *  1 - SAMPLE_IP must have constant skid
-				 *  2 - SAMPLE_IP requested to have 0 skid
-				 *  3 - SAMPLE_IP must have 0 skid
-				 *
-				 *  See also PERF_RECORD_MISC_EXACT_IP
-				 */
-				precise_ip     :  2, /* skid constraint       */
-				mmap_data      :  1, /* non-exec mmap data    */
-				sample_id_all  :  1, /* sample_type all events */
-
-				exclude_host   :  1, /* don't count in host   */
-				exclude_guest  :  1, /* don't count in guest  */
-
-				exclude_callchain_kernel : 1, /* exclude kernel callchains */
-				exclude_callchain_user   : 1, /* exclude user callchains */
-
-				__reserved_1   : 41;
-
-	union {
-		__u32		wakeup_events;	  /* wakeup every n events */
-		__u32		wakeup_watermark; /* bytes before wakeup   */
-	};
-
-	__u32			bp_type;
-	union {
-		__u64		bp_addr;
-		__u64		config1; /* extension of config */
-	};
-	union {
-		__u64		bp_len;
-		__u64		config2; /* extension of config1 */
-	};
-	__u64	branch_sample_type; /* enum perf_branch_sample_type */
-
-	/*
-	 * Defines set of user regs to dump on samples.
-	 * See asm/perf_regs.h for details.
-	 */
-	__u64	sample_regs_user;
-
-	/*
-	 * Defines size of the user stack to dump on samples.
-	 */
-	__u32	sample_stack_user;
-
-	/* Align to u64. */
-	__u32	__reserved_2;
-};
-
-#define perf_flags(attr)	(*(&(attr)->read_format + 1))
-
-/*
- * Ioctls that can be done on a perf event fd:
- */
-#define PERF_EVENT_IOC_ENABLE		_IO ('$', 0)
-#define PERF_EVENT_IOC_DISABLE		_IO ('$', 1)
-#define PERF_EVENT_IOC_REFRESH		_IO ('$', 2)
-#define PERF_EVENT_IOC_RESET		_IO ('$', 3)
-#define PERF_EVENT_IOC_PERIOD		_IOW('$', 4, __u64)
-#define PERF_EVENT_IOC_SET_OUTPUT	_IO ('$', 5)
-#define PERF_EVENT_IOC_SET_FILTER	_IOW('$', 6, char *)
-
-enum perf_event_ioc_flags {
-	PERF_IOC_FLAG_GROUP		= 1U << 0,
-};
-
-/*
- * Structure of the page that can be mapped via mmap
- */
-struct perf_event_mmap_page {
-	__u32	version;		/* version number of this structure */
-	__u32	compat_version;		/* lowest version this is compat with */
-
-	/*
-	 * Bits needed to read the hw events in user-space.
-	 *
-	 *   u32 seq, time_mult, time_shift, idx, width;
-	 *   u64 count, enabled, running;
-	 *   u64 cyc, time_offset;
-	 *   s64 pmc = 0;
-	 *
-	 *   do {
-	 *     seq = pc->lock;
-	 *     barrier()
-	 *
-	 *     enabled = pc->time_enabled;
-	 *     running = pc->time_running;
-	 *
-	 *     if (pc->cap_usr_time && enabled != running) {
-	 *       cyc = rdtsc();
-	 *       time_offset = pc->time_offset;
-	 *       time_mult   = pc->time_mult;
-	 *       time_shift  = pc->time_shift;
-	 *     }
-	 *
-	 *     idx = pc->index;
-	 *     count = pc->offset;
-	 *     if (pc->cap_usr_rdpmc && idx) {
-	 *       width = pc->pmc_width;
-	 *       pmc = rdpmc(idx - 1);
-	 *     }
-	 *
-	 *     barrier();
-	 *   } while (pc->lock != seq);
-	 *
-	 * NOTE: for obvious reason this only works on self-monitoring
-	 *       processes.
-	 */
-	__u32	lock;			/* seqlock for synchronization */
-	__u32	index;			/* hardware event identifier */
-	__s64	offset;			/* add to hardware event value */
-	__u64	time_enabled;		/* time event active */
-	__u64	time_running;		/* time event on cpu */
-	union {
-		__u64	capabilities;
-		__u64	cap_usr_time  : 1,
-			cap_usr_rdpmc : 1,
-			cap_____res   : 62;
-	};
-
-	/*
-	 * If cap_usr_rdpmc this field provides the bit-width of the value
-	 * read using the rdpmc() or equivalent instruction. This can be used
-	 * to sign extend the result like:
-	 *
-	 *   pmc <<= 64 - width;
-	 *   pmc >>= 64 - width; // signed shift right
-	 *   count += pmc;
-	 */
-	__u16	pmc_width;
-
-	/*
-	 * If cap_usr_time the below fields can be used to compute the time
-	 * delta since time_enabled (in ns) using rdtsc or similar.
-	 *
-	 *   u64 quot, rem;
-	 *   u64 delta;
-	 *
-	 *   quot = (cyc >> time_shift);
-	 *   rem = cyc & ((1 << time_shift) - 1);
-	 *   delta = time_offset + quot * time_mult +
-	 *              ((rem * time_mult) >> time_shift);
-	 *
-	 * Where time_offset,time_mult,time_shift and cyc are read in the
-	 * seqcount loop described above. This delta can then be added to
-	 * enabled and possible running (if idx), improving the scaling:
-	 *
-	 *   enabled += delta;
-	 *   if (idx)
-	 *     running += delta;
-	 *
-	 *   quot = count / running;
-	 *   rem  = count % running;
-	 *   count = quot * enabled + (rem * enabled) / running;
-	 */
-	__u16	time_shift;
-	__u32	time_mult;
-	__u64	time_offset;
-
-		/*
-		 * Hole for extension of the self monitor capabilities
-		 */
-
-	__u64	__reserved[120];	/* align to 1k */
-
-	/*
-	 * Control data for the mmap() data buffer.
-	 *
-	 * User-space reading the @data_head value should issue an rmb(), on
-	 * SMP capable platforms, after reading this value -- see
-	 * perf_event_wakeup().
-	 *
-	 * When the mapping is PROT_WRITE the @data_tail value should be
-	 * written by userspace to reflect the last read data. In this case
-	 * the kernel will not over-write unread data.
-	 */
-	__u64   data_head;		/* head in the data section */
-	__u64	data_tail;		/* user-space written tail */
-};
-
-#define PERF_RECORD_MISC_CPUMODE_MASK		(7 << 0)
-#define PERF_RECORD_MISC_CPUMODE_UNKNOWN	(0 << 0)
-#define PERF_RECORD_MISC_KERNEL			(1 << 0)
-#define PERF_RECORD_MISC_USER			(2 << 0)
-#define PERF_RECORD_MISC_HYPERVISOR		(3 << 0)
-#define PERF_RECORD_MISC_GUEST_KERNEL		(4 << 0)
-#define PERF_RECORD_MISC_GUEST_USER		(5 << 0)
-
-/*
- * Indicates that the content of PERF_SAMPLE_IP points to
- * the actual instruction that triggered the event. See also
- * perf_event_attr::precise_ip.
- */
-#define PERF_RECORD_MISC_EXACT_IP		(1 << 14)
-/*
- * Reserve the last bit to indicate some extended misc field
- */
-#define PERF_RECORD_MISC_EXT_RESERVED		(1 << 15)
-
-struct perf_event_header {
-	__u32	type;
-	__u16	misc;
-	__u16	size;
-};
-
-enum perf_event_type {
-
-	/*
-	 * If perf_event_attr.sample_id_all is set then all event types will
-	 * have the sample_type selected fields related to where/when
-	 * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
-	 * described in PERF_RECORD_SAMPLE below, it will be stashed just after
-	 * the perf_event_header and the fields already present for the existing
-	 * fields, i.e. at the end of the payload. That way a newer perf.data
-	 * file will be supported by older perf tools, with these new optional
-	 * fields being ignored.
-	 *
-	 * The MMAP events record the PROT_EXEC mappings so that we can
-	 * correlate userspace IPs to code. They have the following structure:
-	 *
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	u32				pid, tid;
-	 *	u64				addr;
-	 *	u64				len;
-	 *	u64				pgoff;
-	 *	char				filename[];
-	 * };
-	 */
-	PERF_RECORD_MMAP			= 1,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u64				id;
-	 *	u64				lost;
-	 * };
-	 */
-	PERF_RECORD_LOST			= 2,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	u32				pid, tid;
-	 *	char				comm[];
-	 * };
-	 */
-	PERF_RECORD_COMM			= 3,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, ppid;
-	 *	u32				tid, ptid;
-	 *	u64				time;
-	 * };
-	 */
-	PERF_RECORD_EXIT			= 4,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u64				time;
-	 *	u64				id;
-	 *	u64				stream_id;
-	 * };
-	 */
-	PERF_RECORD_THROTTLE			= 5,
-	PERF_RECORD_UNTHROTTLE			= 6,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, ppid;
-	 *	u32				tid, ptid;
-	 *	u64				time;
-	 * };
-	 */
-	PERF_RECORD_FORK			= 7,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, tid;
-	 *
-	 *	struct read_format		values;
-	 * };
-	 */
-	PERF_RECORD_READ			= 8,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	{ u64			ip;	  } && PERF_SAMPLE_IP
-	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
-	 *	{ u64			time;     } && PERF_SAMPLE_TIME
-	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
-	 *	{ u64			id;	  } && PERF_SAMPLE_ID
-	 *	{ u64			stream_id;} && PERF_SAMPLE_STREAM_ID
-	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
-	 *	{ u64			period;   } && PERF_SAMPLE_PERIOD
-	 *
-	 *	{ struct read_format	values;	  } && PERF_SAMPLE_READ
-	 *
-	 *	{ u64			nr,
-	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
-	 *
-	 *	#
-	 *	# The RAW record below is opaque data wrt the ABI
-	 *	#
-	 *	# That is, the ABI doesn't make any promises wrt to
-	 *	# the stability of its content, it may vary depending
-	 *	# on event, hardware, kernel version and phase of
-	 *	# the moon.
-	 *	#
-	 *	# In other words, PERF_SAMPLE_RAW contents are not an ABI.
-	 *	#
-	 *
-	 *	{ u32			size;
-	 *	  char                  data[size];}&& PERF_SAMPLE_RAW
-	 *
-	 *	{ u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
-	 *
-	 * 	{ u64			abi; # enum perf_sample_regs_abi
-	 * 	  u64			regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER
-	 *
-	 * 	{ u64			size;
-	 * 	  char			data[size];
-	 * 	  u64			dyn_size; } && PERF_SAMPLE_STACK_USER
-	 * };
-	 */
-	PERF_RECORD_SAMPLE			= 9,
-
-	PERF_RECORD_MAX,			/* non-ABI */
-};
-
-#define PERF_MAX_STACK_DEPTH		127
-
-enum perf_callchain_context {
-	PERF_CONTEXT_HV			= (__u64)-32,
-	PERF_CONTEXT_KERNEL		= (__u64)-128,
-	PERF_CONTEXT_USER		= (__u64)-512,
-
-	PERF_CONTEXT_GUEST		= (__u64)-2048,
-	PERF_CONTEXT_GUEST_KERNEL	= (__u64)-2176,
-	PERF_CONTEXT_GUEST_USER		= (__u64)-2560,
-
-	PERF_CONTEXT_MAX		= (__u64)-4095,
-};
-
-#define PERF_FLAG_FD_NO_GROUP		(1U << 0)
-#define PERF_FLAG_FD_OUTPUT		(1U << 1)
-#define PERF_FLAG_PID_CGROUP		(1U << 2) /* pid=cgroup id, per-cpu mode only */
-
-#ifdef __KERNEL__
-/*
  * Kernel-internal data types and definitions:
  */
 
@@ -1422,5 +825,4 @@ _name##_show(struct device *dev,					\
 									\
 static struct device_attribute format_attr_##_name = __ATTR_RO(_name)
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_PERF_EVENT_H */
diff --git a/include/linux/personality.h b/include/linux/personality.h
index 8fc7dd1a57ff..646c0a7d50fa 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -1,7 +1,8 @@
 #ifndef _LINUX_PERSONALITY_H
 #define _LINUX_PERSONALITY_H
 
-#ifdef __KERNEL__
+#include <uapi/linux/personality.h>
+
 
 /*
  * Handling of different ABIs (personalities).
@@ -14,72 +15,6 @@ extern int		register_exec_domain(struct exec_domain *);
 extern int		unregister_exec_domain(struct exec_domain *);
 extern int		__set_personality(unsigned int);
 
-#endif /* __KERNEL__ */
-
-/*
- * Flags for bug emulation.
- *
- * These occupy the top three bytes.
- */
-enum {
-	UNAME26	=               0x0020000,
-	ADDR_NO_RANDOMIZE = 	0x0040000,	/* disable randomization of VA space */
-	FDPIC_FUNCPTRS =	0x0080000,	/* userspace function ptrs point to descriptors
-						 * (signal handling)
-						 */
-	MMAP_PAGE_ZERO =	0x0100000,
-	ADDR_COMPAT_LAYOUT =	0x0200000,
-	READ_IMPLIES_EXEC =	0x0400000,
-	ADDR_LIMIT_32BIT =	0x0800000,
-	SHORT_INODE =		0x1000000,
-	WHOLE_SECONDS =		0x2000000,
-	STICKY_TIMEOUTS	=	0x4000000,
-	ADDR_LIMIT_3GB = 	0x8000000,
-};
-
-/*
- * Security-relevant compatibility flags that must be
- * cleared upon setuid or setgid exec:
- */
-#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC  | \
-			    ADDR_NO_RANDOMIZE  | \
-			    ADDR_COMPAT_LAYOUT | \
-			    MMAP_PAGE_ZERO)
-
-/*
- * Personality types.
- *
- * These go in the low byte.  Avoid using the top bit, it will
- * conflict with error returns.
- */
-enum {
-	PER_LINUX =		0x0000,
-	PER_LINUX_32BIT =	0x0000 | ADDR_LIMIT_32BIT,
-	PER_LINUX_FDPIC =	0x0000 | FDPIC_FUNCPTRS,
-	PER_SVR4 =		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-	PER_SVR3 =		0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_SCOSVR3 =		0x0003 | STICKY_TIMEOUTS |
-					 WHOLE_SECONDS | SHORT_INODE,
-	PER_OSR5 =		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
-	PER_WYSEV386 =		0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_ISCR4 =		0x0005 | STICKY_TIMEOUTS,
-	PER_BSD =		0x0006,
-	PER_SUNOS =		0x0006 | STICKY_TIMEOUTS,
-	PER_XENIX =		0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_LINUX32 =		0x0008,
-	PER_LINUX32_3GB =	0x0008 | ADDR_LIMIT_3GB,
-	PER_IRIX32 =		0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
-	PER_IRIXN32 =		0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
-	PER_IRIX64 =		0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
-	PER_RISCOS =		0x000c,
-	PER_SOLARIS =		0x000d | STICKY_TIMEOUTS,
-	PER_UW7 =		0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-	PER_OSF4 =		0x000f,			 /* OSF/1 v4 */
-	PER_HPUX =		0x0010,
-	PER_MASK =		0x00ff,
-};
-
-#ifdef __KERNEL__
 
 /*
  * Description of an execution domain.
@@ -116,6 +51,4 @@ struct exec_domain {
 #define set_personality(pers) \
 	((current->personality == (pers)) ? 0 : __set_personality(pers))
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_PERSONALITY_H */
diff --git a/include/linux/pfkeyv2.h b/include/linux/pfkeyv2.h
deleted file mode 100644
index 0b80c806631f..000000000000
--- a/include/linux/pfkeyv2.h
+++ /dev/null
@@ -1,370 +0,0 @@
-/* PF_KEY user interface, this is defined by rfc2367 so
- * do not make arbitrary modifications or else this header
- * file will not be compliant.
- */
-
-#ifndef _LINUX_PFKEY2_H
-#define _LINUX_PFKEY2_H
-
-#include <linux/types.h>
-
-#define PF_KEY_V2		2
-#define PFKEYV2_REVISION	199806L
-
-struct sadb_msg {
-	__u8		sadb_msg_version;
-	__u8		sadb_msg_type;
-	__u8		sadb_msg_errno;
-	__u8		sadb_msg_satype;
-	__u16	sadb_msg_len;
-	__u16	sadb_msg_reserved;
-	__u32	sadb_msg_seq;
-	__u32	sadb_msg_pid;
-} __attribute__((packed));
-/* sizeof(struct sadb_msg) == 16 */
-
-struct sadb_ext {
-	__u16	sadb_ext_len;
-	__u16	sadb_ext_type;
-} __attribute__((packed));
-/* sizeof(struct sadb_ext) == 4 */
-
-struct sadb_sa {
-	__u16	sadb_sa_len;
-	__u16	sadb_sa_exttype;
-	__be32		sadb_sa_spi;
-	__u8		sadb_sa_replay;
-	__u8		sadb_sa_state;
-	__u8		sadb_sa_auth;
-	__u8		sadb_sa_encrypt;
-	__u32	sadb_sa_flags;
-} __attribute__((packed));
-/* sizeof(struct sadb_sa) == 16 */
-
-struct sadb_lifetime {
-	__u16	sadb_lifetime_len;
-	__u16	sadb_lifetime_exttype;
-	__u32	sadb_lifetime_allocations;
-	__u64	sadb_lifetime_bytes;
-	__u64	sadb_lifetime_addtime;
-	__u64	sadb_lifetime_usetime;
-} __attribute__((packed));
-/* sizeof(struct sadb_lifetime) == 32 */
-
-struct sadb_address {
-	__u16	sadb_address_len;
-	__u16	sadb_address_exttype;
-	__u8		sadb_address_proto;
-	__u8		sadb_address_prefixlen;
-	__u16	sadb_address_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_address) == 8 */
-
-struct sadb_key {
-	__u16	sadb_key_len;
-	__u16	sadb_key_exttype;
-	__u16	sadb_key_bits;
-	__u16	sadb_key_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_key) == 8 */
-
-struct sadb_ident {
-	__u16	sadb_ident_len;
-	__u16	sadb_ident_exttype;
-	__u16	sadb_ident_type;
-	__u16	sadb_ident_reserved;
-	__u64	sadb_ident_id;
-} __attribute__((packed));
-/* sizeof(struct sadb_ident) == 16 */
-
-struct sadb_sens {
-	__u16	sadb_sens_len;
-	__u16	sadb_sens_exttype;
-	__u32	sadb_sens_dpd;
-	__u8		sadb_sens_sens_level;
-	__u8		sadb_sens_sens_len;
-	__u8		sadb_sens_integ_level;
-	__u8		sadb_sens_integ_len;
-	__u32	sadb_sens_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_sens) == 16 */
-
-/* followed by:
-	__u64	sadb_sens_bitmap[sens_len];
-	__u64	sadb_integ_bitmap[integ_len];  */
-
-struct sadb_prop {
-	__u16	sadb_prop_len;
-	__u16	sadb_prop_exttype;
-	__u8		sadb_prop_replay;
-	__u8		sadb_prop_reserved[3];
-} __attribute__((packed));
-/* sizeof(struct sadb_prop) == 8 */
-
-/* followed by:
-	struct sadb_comb sadb_combs[(sadb_prop_len +
-		sizeof(__u64) - sizeof(struct sadb_prop)) /
-		sizeof(struct sadb_comb)]; */
-
-struct sadb_comb {
-	__u8		sadb_comb_auth;
-	__u8		sadb_comb_encrypt;
-	__u16	sadb_comb_flags;
-	__u16	sadb_comb_auth_minbits;
-	__u16	sadb_comb_auth_maxbits;
-	__u16	sadb_comb_encrypt_minbits;
-	__u16	sadb_comb_encrypt_maxbits;
-	__u32	sadb_comb_reserved;
-	__u32	sadb_comb_soft_allocations;
-	__u32	sadb_comb_hard_allocations;
-	__u64	sadb_comb_soft_bytes;
-	__u64	sadb_comb_hard_bytes;
-	__u64	sadb_comb_soft_addtime;
-	__u64	sadb_comb_hard_addtime;
-	__u64	sadb_comb_soft_usetime;
-	__u64	sadb_comb_hard_usetime;
-} __attribute__((packed));
-/* sizeof(struct sadb_comb) == 72 */
-
-struct sadb_supported {
-	__u16	sadb_supported_len;
-	__u16	sadb_supported_exttype;
-	__u32	sadb_supported_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_supported) == 8 */
-
-/* followed by:
-	struct sadb_alg sadb_algs[(sadb_supported_len +
-		sizeof(__u64) - sizeof(struct sadb_supported)) /
-		sizeof(struct sadb_alg)]; */
-
-struct sadb_alg {
-	__u8		sadb_alg_id;
-	__u8		sadb_alg_ivlen;
-	__u16	sadb_alg_minbits;
-	__u16	sadb_alg_maxbits;
-	__u16	sadb_alg_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_alg) == 8 */
-
-struct sadb_spirange {
-	__u16	sadb_spirange_len;
-	__u16	sadb_spirange_exttype;
-	__u32	sadb_spirange_min;
-	__u32	sadb_spirange_max;
-	__u32	sadb_spirange_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_spirange) == 16 */
-
-struct sadb_x_kmprivate {
-	__u16	sadb_x_kmprivate_len;
-	__u16	sadb_x_kmprivate_exttype;
-	__u32	sadb_x_kmprivate_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_kmprivate) == 8 */
-
-struct sadb_x_sa2 {
-	__u16	sadb_x_sa2_len;
-	__u16	sadb_x_sa2_exttype;
-	__u8		sadb_x_sa2_mode;
-	__u8		sadb_x_sa2_reserved1;
-	__u16	sadb_x_sa2_reserved2;
-	__u32	sadb_x_sa2_sequence;
-	__u32	sadb_x_sa2_reqid;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_sa2) == 16 */
-
-struct sadb_x_policy {
-	__u16	sadb_x_policy_len;
-	__u16	sadb_x_policy_exttype;
-	__u16	sadb_x_policy_type;
-	__u8		sadb_x_policy_dir;
-	__u8		sadb_x_policy_reserved;
-	__u32	sadb_x_policy_id;
-	__u32	sadb_x_policy_priority;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_policy) == 16 */
-
-struct sadb_x_ipsecrequest {
-	__u16	sadb_x_ipsecrequest_len;
-	__u16	sadb_x_ipsecrequest_proto;
-	__u8		sadb_x_ipsecrequest_mode;
-	__u8		sadb_x_ipsecrequest_level;
-	__u16	sadb_x_ipsecrequest_reserved1;
-	__u32	sadb_x_ipsecrequest_reqid;
-	__u32	sadb_x_ipsecrequest_reserved2;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_ipsecrequest) == 16 */
-
-/* This defines the TYPE of Nat Traversal in use.  Currently only one
- * type of NAT-T is supported, draft-ietf-ipsec-udp-encaps-06
- */
-struct sadb_x_nat_t_type {
-	__u16	sadb_x_nat_t_type_len;
-	__u16	sadb_x_nat_t_type_exttype;
-	__u8		sadb_x_nat_t_type_type;
-	__u8		sadb_x_nat_t_type_reserved[3];
-} __attribute__((packed));
-/* sizeof(struct sadb_x_nat_t_type) == 8 */
-
-/* Pass a NAT Traversal port (Source or Dest port) */
-struct sadb_x_nat_t_port {
-	__u16	sadb_x_nat_t_port_len;
-	__u16	sadb_x_nat_t_port_exttype;
-	__be16		sadb_x_nat_t_port_port;
-	__u16	sadb_x_nat_t_port_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_nat_t_port) == 8 */
-
-/* Generic LSM security context */
-struct sadb_x_sec_ctx {
-	__u16	sadb_x_sec_len;
-	__u16	sadb_x_sec_exttype;
-	__u8		sadb_x_ctx_alg;  /* LSMs: e.g., selinux == 1 */
-	__u8		sadb_x_ctx_doi;
-	__u16	sadb_x_ctx_len;
-} __attribute__((packed));
-/* sizeof(struct sadb_sec_ctx) = 8 */
-
-/* Used by MIGRATE to pass addresses IKE will use to perform
- * negotiation with the peer */
-struct sadb_x_kmaddress {
-	__u16	sadb_x_kmaddress_len;
-	__u16	sadb_x_kmaddress_exttype;
-	__u32	sadb_x_kmaddress_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_kmaddress) == 8 */
-
-/* Message types */
-#define SADB_RESERVED		0
-#define SADB_GETSPI		1
-#define SADB_UPDATE		2
-#define SADB_ADD		3
-#define SADB_DELETE		4
-#define SADB_GET		5
-#define SADB_ACQUIRE		6
-#define SADB_REGISTER		7
-#define SADB_EXPIRE		8
-#define SADB_FLUSH		9
-#define SADB_DUMP		10
-#define SADB_X_PROMISC		11
-#define SADB_X_PCHANGE		12
-#define SADB_X_SPDUPDATE	13
-#define SADB_X_SPDADD		14
-#define SADB_X_SPDDELETE	15
-#define SADB_X_SPDGET		16
-#define SADB_X_SPDACQUIRE	17
-#define SADB_X_SPDDUMP		18
-#define SADB_X_SPDFLUSH		19
-#define SADB_X_SPDSETIDX	20
-#define SADB_X_SPDEXPIRE	21
-#define SADB_X_SPDDELETE2	22
-#define SADB_X_NAT_T_NEW_MAPPING	23
-#define SADB_X_MIGRATE		24
-#define SADB_MAX		24
-
-/* Security Association flags */
-#define SADB_SAFLAGS_PFS	1
-#define SADB_SAFLAGS_NOPMTUDISC	0x20000000
-#define SADB_SAFLAGS_DECAP_DSCP	0x40000000
-#define SADB_SAFLAGS_NOECN	0x80000000
-
-/* Security Association states */
-#define SADB_SASTATE_LARVAL	0
-#define SADB_SASTATE_MATURE	1
-#define SADB_SASTATE_DYING	2
-#define SADB_SASTATE_DEAD	3
-#define SADB_SASTATE_MAX	3
-
-/* Security Association types */
-#define SADB_SATYPE_UNSPEC	0
-#define SADB_SATYPE_AH		2
-#define SADB_SATYPE_ESP		3
-#define SADB_SATYPE_RSVP	5
-#define SADB_SATYPE_OSPFV2	6
-#define SADB_SATYPE_RIPV2	7
-#define SADB_SATYPE_MIP		8
-#define SADB_X_SATYPE_IPCOMP	9
-#define SADB_SATYPE_MAX		9
-
-/* Authentication algorithms */
-#define SADB_AALG_NONE			0
-#define SADB_AALG_MD5HMAC		2
-#define SADB_AALG_SHA1HMAC		3
-#define SADB_X_AALG_SHA2_256HMAC	5
-#define SADB_X_AALG_SHA2_384HMAC	6
-#define SADB_X_AALG_SHA2_512HMAC	7
-#define SADB_X_AALG_RIPEMD160HMAC	8
-#define SADB_X_AALG_AES_XCBC_MAC	9
-#define SADB_X_AALG_NULL		251	/* kame */
-#define SADB_AALG_MAX			251
-
-/* Encryption algorithms */
-#define SADB_EALG_NONE			0
-#define SADB_EALG_DESCBC		2
-#define SADB_EALG_3DESCBC		3
-#define SADB_X_EALG_CASTCBC		6
-#define SADB_X_EALG_BLOWFISHCBC		7
-#define SADB_EALG_NULL			11
-#define SADB_X_EALG_AESCBC		12
-#define SADB_X_EALG_AESCTR		13
-#define SADB_X_EALG_AES_CCM_ICV8	14
-#define SADB_X_EALG_AES_CCM_ICV12	15
-#define SADB_X_EALG_AES_CCM_ICV16	16
-#define SADB_X_EALG_AES_GCM_ICV8	18
-#define SADB_X_EALG_AES_GCM_ICV12	19
-#define SADB_X_EALG_AES_GCM_ICV16	20
-#define SADB_X_EALG_CAMELLIACBC		22
-#define SADB_X_EALG_NULL_AES_GMAC	23
-#define SADB_EALG_MAX                   253 /* last EALG */
-/* private allocations should use 249-255 (RFC2407) */
-#define SADB_X_EALG_SERPENTCBC  252     /* draft-ietf-ipsec-ciph-aes-cbc-00 */
-#define SADB_X_EALG_TWOFISHCBC  253     /* draft-ietf-ipsec-ciph-aes-cbc-00 */
-
-/* Compression algorithms */
-#define SADB_X_CALG_NONE		0
-#define SADB_X_CALG_OUI			1
-#define SADB_X_CALG_DEFLATE		2
-#define SADB_X_CALG_LZS			3
-#define SADB_X_CALG_LZJH		4
-#define SADB_X_CALG_MAX			4
-
-/* Extension Header values */
-#define SADB_EXT_RESERVED		0
-#define SADB_EXT_SA			1
-#define SADB_EXT_LIFETIME_CURRENT	2
-#define SADB_EXT_LIFETIME_HARD		3
-#define SADB_EXT_LIFETIME_SOFT		4
-#define SADB_EXT_ADDRESS_SRC		5
-#define SADB_EXT_ADDRESS_DST		6
-#define SADB_EXT_ADDRESS_PROXY		7
-#define SADB_EXT_KEY_AUTH		8
-#define SADB_EXT_KEY_ENCRYPT		9
-#define SADB_EXT_IDENTITY_SRC		10
-#define SADB_EXT_IDENTITY_DST		11
-#define SADB_EXT_SENSITIVITY		12
-#define SADB_EXT_PROPOSAL		13
-#define SADB_EXT_SUPPORTED_AUTH		14
-#define SADB_EXT_SUPPORTED_ENCRYPT	15
-#define SADB_EXT_SPIRANGE		16
-#define SADB_X_EXT_KMPRIVATE		17
-#define SADB_X_EXT_POLICY		18
-#define SADB_X_EXT_SA2			19
-/* The next four entries are for setting up NAT Traversal */
-#define SADB_X_EXT_NAT_T_TYPE		20
-#define SADB_X_EXT_NAT_T_SPORT		21
-#define SADB_X_EXT_NAT_T_DPORT		22
-#define SADB_X_EXT_NAT_T_OA		23
-#define SADB_X_EXT_SEC_CTX		24
-/* Used with MIGRATE to pass @ to IKE for negotiation */
-#define SADB_X_EXT_KMADDRESS		25
-#define SADB_EXT_MAX			25
-
-/* Identity Extension values */
-#define SADB_IDENTTYPE_RESERVED	0
-#define SADB_IDENTTYPE_PREFIX	1
-#define SADB_IDENTTYPE_FQDN	2
-#define SADB_IDENTTYPE_USERFQDN	3
-#define SADB_IDENTTYPE_MAX	3
-
-#endif /* !(_LINUX_PFKEY2_H) */
diff --git a/include/linux/pg.h b/include/linux/pg.h
deleted file mode 100644
index db994bb0c794..000000000000
--- a/include/linux/pg.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* 	pg.h (c) 1998  Grant R. Guenther <grant@torque.net>
- 		       Under the terms of the GNU General Public License
-
-
-	pg.h defines the user interface to the generic ATAPI packet
-        command driver for parallel port ATAPI devices (pg). The
-	driver is loosely modelled after the generic SCSI driver, sg,
-	although the actual interface is different.
-
-	The pg driver provides a simple character device interface for
-        sending ATAPI commands to a device.  With the exception of the
-	ATAPI reset operation, all operations are performed by a pair
-        of read and write operations to the appropriate /dev/pgN device.
-	A write operation delivers a command and any outbound data in
-        a single buffer.  Normally, the write will succeed unless the
-        device is offline or malfunctioning, or there is already another
-	command pending.  If the write succeeds, it should be followed
-        immediately by a read operation, to obtain any returned data and
-        status information.  A read will fail if there is no operation
-        in progress.
-
-	As a special case, the device can be reset with a write operation,
-        and in this case, no following read is expected, or permitted.
-
-	There are no ioctl() operations.  Any single operation
-	may transfer at most PG_MAX_DATA bytes.  Note that the driver must
-        copy the data through an internal buffer.  In keeping with all
-	current ATAPI devices, command packets are assumed to be exactly
-	12 bytes in length.
-
-	To permit future changes to this interface, the headers in the
-	read and write buffers contain a single character "magic" flag.
-        Currently this flag must be the character "P".
-
-*/
-
-#define PG_MAGIC	'P'
-#define PG_RESET	'Z'
-#define PG_COMMAND	'C'
-
-#define PG_MAX_DATA	32768
-
-struct pg_write_hdr {
-
-	char	magic;		/* == PG_MAGIC */
-	char	func;		/* PG_RESET or PG_COMMAND */
-	int     dlen;		/* number of bytes expected to transfer */
-	int     timeout;	/* number of seconds before timeout */
-	char	packet[12];	/* packet command */
-
-};
-
-struct pg_read_hdr {
-
-	char	magic;		/* == PG_MAGIC */
-	char	scsi;		/* "scsi" status == sense key */
-	int	dlen;		/* size of device transfer request */
-	int     duration;	/* time in seconds command took */
-	char    pad[12];	/* not used */
-
-};
-
-/* end of pg.h */
diff --git a/include/linux/phantom.h b/include/linux/phantom.h
deleted file mode 100644
index 94dd6645c60a..000000000000
--- a/include/linux/phantom.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  Copyright (C) 2005-2007 Jiri Slaby <jirislaby@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- */
-
-#ifndef __PHANTOM_H
-#define __PHANTOM_H
-
-#include <linux/types.h>
-
-/* PHN_(G/S)ET_REG param */
-struct phm_reg {
-	__u32 reg;
-	__u32 value;
-};
-
-/* PHN_(G/S)ET_REGS param */
-struct phm_regs {
-	__u32 count;
-	__u32 mask;
-	__u32 values[8];
-};
-
-#define PH_IOC_MAGIC		'p'
-#define PHN_GET_REG		_IOWR(PH_IOC_MAGIC, 0, struct phm_reg *)
-#define PHN_SET_REG		_IOW(PH_IOC_MAGIC, 1, struct phm_reg *)
-#define PHN_GET_REGS		_IOWR(PH_IOC_MAGIC, 2, struct phm_regs *)
-#define PHN_SET_REGS		_IOW(PH_IOC_MAGIC, 3, struct phm_regs *)
-/* this ioctl tells the driver, that the caller is not OpenHaptics and might
- * use improved registers update (no more phantom switchoffs when using
- * libphantom) */
-#define PHN_NOT_OH		_IO(PH_IOC_MAGIC, 4)
-#define PHN_GETREG		_IOWR(PH_IOC_MAGIC, 5, struct phm_reg)
-#define PHN_SETREG		_IOW(PH_IOC_MAGIC, 6, struct phm_reg)
-#define PHN_GETREGS		_IOWR(PH_IOC_MAGIC, 7, struct phm_regs)
-#define PHN_SETREGS		_IOW(PH_IOC_MAGIC, 8, struct phm_regs)
-
-#define PHN_CONTROL		0x6     /* control byte in iaddr space */
-#define PHN_CTL_AMP		0x1     /*   switch after torques change */
-#define PHN_CTL_BUT		0x2     /*   is button switched */
-#define PHN_CTL_IRQ		0x10    /*   is irq enabled */
-
-#define PHN_ZERO_FORCE		2048	/* zero torque on motor */
-
-#endif
diff --git a/include/linux/phonet.h b/include/linux/phonet.h
index f48bfc80cb4b..f691b04fc5ce 100644
--- a/include/linux/phonet.h
+++ b/include/linux/phonet.h
@@ -19,169 +19,11 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  * 02110-1301 USA
  */
-
 #ifndef LINUX_PHONET_H
 #define LINUX_PHONET_H
 
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Automatic protocol selection */
-#define PN_PROTO_TRANSPORT	0
-/* Phonet datagram socket */
-#define PN_PROTO_PHONET		1
-/* Phonet pipe */
-#define PN_PROTO_PIPE		2
-#define PHONET_NPROTO		3
-
-/* Socket options for SOL_PNPIPE level */
-#define PNPIPE_ENCAP		1
-#define PNPIPE_IFINDEX		2
-#define PNPIPE_HANDLE		3
-#define PNPIPE_INITSTATE	4
-
-#define PNADDR_ANY		0
-#define PNADDR_BROADCAST	0xFC
-#define PNPORT_RESOURCE_ROUTING	0
-
-/* Values for PNPIPE_ENCAP option */
-#define PNPIPE_ENCAP_NONE	0
-#define PNPIPE_ENCAP_IP		1
-
-/* ioctls */
-#define SIOCPNGETOBJECT		(SIOCPROTOPRIVATE + 0)
-#define SIOCPNENABLEPIPE	(SIOCPROTOPRIVATE + 13)
-#define SIOCPNADDRESOURCE	(SIOCPROTOPRIVATE + 14)
-#define SIOCPNDELRESOURCE	(SIOCPROTOPRIVATE + 15)
-
-/* Phonet protocol header */
-struct phonethdr {
-	__u8	pn_rdev;
-	__u8	pn_sdev;
-	__u8	pn_res;
-	__be16	pn_length;
-	__u8	pn_robj;
-	__u8	pn_sobj;
-} __attribute__((packed));
-
-/* Common Phonet payload header */
-struct phonetmsg {
-	__u8	pn_trans_id;	/* transaction ID */
-	__u8	pn_msg_id;	/* message type */
-	union {
-		struct {
-			__u8	pn_submsg_id;	/* message subtype */
-			__u8	pn_data[5];
-		} base;
-		struct {
-			__u16	pn_e_res_id;	/* extended resource ID */
-			__u8	pn_e_submsg_id;	/* message subtype */
-			__u8	pn_e_data[3];
-		} ext;
-	} pn_msg_u;
-};
-#define PN_COMMON_MESSAGE	0xF0
-#define PN_COMMGR		0x10
-#define PN_PREFIX		0xE0 /* resource for extended messages */
-#define pn_submsg_id		pn_msg_u.base.pn_submsg_id
-#define pn_e_submsg_id		pn_msg_u.ext.pn_e_submsg_id
-#define pn_e_res_id		pn_msg_u.ext.pn_e_res_id
-#define pn_data			pn_msg_u.base.pn_data
-#define pn_e_data		pn_msg_u.ext.pn_e_data
-
-/* data for unreachable errors */
-#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP	0x01
-#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP	0x14
-#define pn_orig_msg_id		pn_data[0]
-#define pn_status		pn_data[1]
-#define pn_e_orig_msg_id	pn_e_data[0]
-#define pn_e_status		pn_e_data[1]
-
-/* Phonet socket address structure */
-struct sockaddr_pn {
-	__kernel_sa_family_t spn_family;
-	__u8 spn_obj;
-	__u8 spn_dev;
-	__u8 spn_resource;
-	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
-} __attribute__((packed));
-
-/* Well known address */
-#define PN_DEV_PC	0x10
-
-static inline __u16 pn_object(__u8 addr, __u16 port)
-{
-	return (addr << 8) | (port & 0x3ff);
-}
+#include <uapi/linux/phonet.h>
 
-static inline __u8 pn_obj(__u16 handle)
-{
-	return handle & 0xff;
-}
-
-static inline __u8 pn_dev(__u16 handle)
-{
-	return handle >> 8;
-}
-
-static inline __u16 pn_port(__u16 handle)
-{
-	return handle & 0x3ff;
-}
-
-static inline __u8 pn_addr(__u16 handle)
-{
-	return (handle >> 8) & 0xfc;
-}
-
-static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr)
-{
-	spn->spn_dev &= 0x03;
-	spn->spn_dev |= addr & 0xfc;
-}
-
-static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port)
-{
-	spn->spn_dev &= 0xfc;
-	spn->spn_dev |= (port >> 8) & 0x03;
-	spn->spn_obj = port & 0xff;
-}
-
-static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn,
-						__u16 handle)
-{
-	spn->spn_dev = pn_dev(handle);
-	spn->spn_obj = pn_obj(handle);
-}
-
-static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn,
-						__u8 resource)
-{
-	spn->spn_resource = resource;
-}
-
-static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn)
-{
-	return spn->spn_dev & 0xfc;
-}
-
-static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn)
-{
-	return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj;
-}
-
-static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn)
-{
-	return pn_object(spn->spn_dev, spn->spn_obj);
-}
-
-static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
-{
-	return spn->spn_resource;
-}
-
-/* Phonet device ioctl requests */
-#ifdef __KERNEL__
 #define SIOCPNGAUTOCONF		(SIOCDEVPRIVATE + 0)
 
 struct if_phonet_autoconf {
@@ -195,6 +37,4 @@ struct if_phonet_req {
 	} ifr_ifru;
 };
 #define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h
deleted file mode 100644
index 082eafaf026b..000000000000
--- a/include/linux/pkt_cls.h
+++ /dev/null
@@ -1,469 +0,0 @@
-#ifndef __LINUX_PKT_CLS_H
-#define __LINUX_PKT_CLS_H
-
-#include <linux/types.h>
-#include <linux/pkt_sched.h>
-
-/* I think i could have done better macros ; for now this is stolen from
- * some arch/mips code - jhs
-*/
-#define _TC_MAKE32(x) ((x))
-
-#define _TC_MAKEMASK1(n) (_TC_MAKE32(1) << _TC_MAKE32(n))
-#define _TC_MAKEMASK(v,n) (_TC_MAKE32((_TC_MAKE32(1)<<(v))-1) << _TC_MAKE32(n))
-#define _TC_MAKEVALUE(v,n) (_TC_MAKE32(v) << _TC_MAKE32(n))
-#define _TC_GETVALUE(v,n,m) ((_TC_MAKE32(v) & _TC_MAKE32(m)) >> _TC_MAKE32(n))
-
-/* verdict bit breakdown 
- *
-bit 0: when set -> this packet has been munged already
-
-bit 1: when set -> It is ok to munge this packet
-
-bit 2,3,4,5: Reclassify counter - sort of reverse TTL - if exceeded
-assume loop
-
-bit 6,7: Where this packet was last seen 
-0: Above the transmit example at the socket level
-1: on the Ingress
-2: on the Egress
-
-bit 8: when set --> Request not to classify on ingress. 
-
-bits 9,10,11: redirect counter -  redirect TTL. Loop avoidance
-
- *
- * */
-
-#define TC_MUNGED          _TC_MAKEMASK1(0)
-#define SET_TC_MUNGED(v)   ( TC_MUNGED | (v & ~TC_MUNGED))
-#define CLR_TC_MUNGED(v)   ( v & ~TC_MUNGED)
-
-#define TC_OK2MUNGE        _TC_MAKEMASK1(1)
-#define SET_TC_OK2MUNGE(v)   ( TC_OK2MUNGE | (v & ~TC_OK2MUNGE))
-#define CLR_TC_OK2MUNGE(v)   ( v & ~TC_OK2MUNGE)
-
-#define S_TC_VERD          _TC_MAKE32(2)
-#define M_TC_VERD          _TC_MAKEMASK(4,S_TC_VERD)
-#define G_TC_VERD(x)       _TC_GETVALUE(x,S_TC_VERD,M_TC_VERD)
-#define V_TC_VERD(x)       _TC_MAKEVALUE(x,S_TC_VERD)
-#define SET_TC_VERD(v,n)   ((V_TC_VERD(n)) | (v & ~M_TC_VERD))
-
-#define S_TC_FROM          _TC_MAKE32(6)
-#define M_TC_FROM          _TC_MAKEMASK(2,S_TC_FROM)
-#define G_TC_FROM(x)       _TC_GETVALUE(x,S_TC_FROM,M_TC_FROM)
-#define V_TC_FROM(x)       _TC_MAKEVALUE(x,S_TC_FROM)
-#define SET_TC_FROM(v,n)   ((V_TC_FROM(n)) | (v & ~M_TC_FROM))
-#define AT_STACK	0x0
-#define AT_INGRESS	0x1
-#define AT_EGRESS	0x2
-
-#define TC_NCLS          _TC_MAKEMASK1(8)
-#define SET_TC_NCLS(v)   ( TC_NCLS | (v & ~TC_NCLS))
-#define CLR_TC_NCLS(v)   ( v & ~TC_NCLS)
-
-#define S_TC_RTTL          _TC_MAKE32(9)
-#define M_TC_RTTL          _TC_MAKEMASK(3,S_TC_RTTL)
-#define G_TC_RTTL(x)       _TC_GETVALUE(x,S_TC_RTTL,M_TC_RTTL)
-#define V_TC_RTTL(x)       _TC_MAKEVALUE(x,S_TC_RTTL)
-#define SET_TC_RTTL(v,n)   ((V_TC_RTTL(n)) | (v & ~M_TC_RTTL))
-
-#define S_TC_AT          _TC_MAKE32(12)
-#define M_TC_AT          _TC_MAKEMASK(2,S_TC_AT)
-#define G_TC_AT(x)       _TC_GETVALUE(x,S_TC_AT,M_TC_AT)
-#define V_TC_AT(x)       _TC_MAKEVALUE(x,S_TC_AT)
-#define SET_TC_AT(v,n)   ((V_TC_AT(n)) | (v & ~M_TC_AT))
-
-/* Action attributes */
-enum {
-	TCA_ACT_UNSPEC,
-	TCA_ACT_KIND,
-	TCA_ACT_OPTIONS,
-	TCA_ACT_INDEX,
-	TCA_ACT_STATS,
-	__TCA_ACT_MAX
-};
-
-#define TCA_ACT_MAX __TCA_ACT_MAX
-#define TCA_OLD_COMPAT (TCA_ACT_MAX+1)
-#define TCA_ACT_MAX_PRIO 32
-#define TCA_ACT_BIND	1
-#define TCA_ACT_NOBIND	0
-#define TCA_ACT_UNBIND	1
-#define TCA_ACT_NOUNBIND	0
-#define TCA_ACT_REPLACE		1
-#define TCA_ACT_NOREPLACE	0
-#define MAX_REC_LOOP 4
-#define MAX_RED_LOOP 4
-
-#define TC_ACT_UNSPEC	(-1)
-#define TC_ACT_OK		0
-#define TC_ACT_RECLASSIFY	1
-#define TC_ACT_SHOT		2
-#define TC_ACT_PIPE		3
-#define TC_ACT_STOLEN		4
-#define TC_ACT_QUEUED		5
-#define TC_ACT_REPEAT		6
-#define TC_ACT_JUMP		0x10000000
-
-/* Action type identifiers*/
-enum {
-	TCA_ID_UNSPEC=0,
-	TCA_ID_POLICE=1,
-	/* other actions go here */
-	__TCA_ID_MAX=255
-};
-
-#define TCA_ID_MAX __TCA_ID_MAX
-
-struct tc_police {
-	__u32			index;
-	int			action;
-#define TC_POLICE_UNSPEC	TC_ACT_UNSPEC
-#define TC_POLICE_OK		TC_ACT_OK
-#define TC_POLICE_RECLASSIFY	TC_ACT_RECLASSIFY
-#define TC_POLICE_SHOT		TC_ACT_SHOT
-#define TC_POLICE_PIPE		TC_ACT_PIPE
-
-	__u32			limit;
-	__u32			burst;
-	__u32			mtu;
-	struct tc_ratespec	rate;
-	struct tc_ratespec	peakrate;
-	int 			refcnt;
-	int 			bindcnt;
-	__u32			capab;
-};
-
-struct tcf_t {
-	__u64   install;
-	__u64   lastuse;
-	__u64   expires;
-};
-
-struct tc_cnt {
-	int                   refcnt; 
-	int                   bindcnt;
-};
-
-#define tc_gen \
-	__u32                 index; \
-	__u32                 capab; \
-	int                   action; \
-	int                   refcnt; \
-	int                   bindcnt
-
-enum {
-	TCA_POLICE_UNSPEC,
-	TCA_POLICE_TBF,
-	TCA_POLICE_RATE,
-	TCA_POLICE_PEAKRATE,
-	TCA_POLICE_AVRATE,
-	TCA_POLICE_RESULT,
-	__TCA_POLICE_MAX
-#define TCA_POLICE_RESULT TCA_POLICE_RESULT
-};
-
-#define TCA_POLICE_MAX (__TCA_POLICE_MAX - 1)
-
-/* U32 filters */
-
-#define TC_U32_HTID(h) ((h)&0xFFF00000)
-#define TC_U32_USERHTID(h) (TC_U32_HTID(h)>>20)
-#define TC_U32_HASH(h) (((h)>>12)&0xFF)
-#define TC_U32_NODE(h) ((h)&0xFFF)
-#define TC_U32_KEY(h) ((h)&0xFFFFF)
-#define TC_U32_UNSPEC	0
-#define TC_U32_ROOT	(0xFFF00000)
-
-enum {
-	TCA_U32_UNSPEC,
-	TCA_U32_CLASSID,
-	TCA_U32_HASH,
-	TCA_U32_LINK,
-	TCA_U32_DIVISOR,
-	TCA_U32_SEL,
-	TCA_U32_POLICE,
-	TCA_U32_ACT,   
-	TCA_U32_INDEV,
-	TCA_U32_PCNT,
-	TCA_U32_MARK,
-	__TCA_U32_MAX
-};
-
-#define TCA_U32_MAX (__TCA_U32_MAX - 1)
-
-struct tc_u32_key {
-	__be32		mask;
-	__be32		val;
-	int		off;
-	int		offmask;
-};
-
-struct tc_u32_sel {
-	unsigned char		flags;
-	unsigned char		offshift;
-	unsigned char		nkeys;
-
-	__be16			offmask;
-	__u16			off;
-	short			offoff;
-
-	short			hoff;
-	__be32			hmask;
-	struct tc_u32_key	keys[0];
-};
-
-struct tc_u32_mark {
-	__u32		val;
-	__u32		mask;
-	__u32		success;
-};
-
-struct tc_u32_pcnt {
-	__u64 rcnt;
-	__u64 rhit;
-	__u64 kcnts[0];
-};
-
-/* Flags */
-
-#define TC_U32_TERMINAL		1
-#define TC_U32_OFFSET		2
-#define TC_U32_VAROFFSET	4
-#define TC_U32_EAT		8
-
-#define TC_U32_MAXDEPTH 8
-
-
-/* RSVP filter */
-
-enum {
-	TCA_RSVP_UNSPEC,
-	TCA_RSVP_CLASSID,
-	TCA_RSVP_DST,
-	TCA_RSVP_SRC,
-	TCA_RSVP_PINFO,
-	TCA_RSVP_POLICE,
-	TCA_RSVP_ACT,
-	__TCA_RSVP_MAX
-};
-
-#define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 )
-
-struct tc_rsvp_gpi {
-	__u32	key;
-	__u32	mask;
-	int	offset;
-};
-
-struct tc_rsvp_pinfo {
-	struct tc_rsvp_gpi dpi;
-	struct tc_rsvp_gpi spi;
-	__u8	protocol;
-	__u8	tunnelid;
-	__u8	tunnelhdr;
-	__u8	pad;
-};
-
-/* ROUTE filter */
-
-enum {
-	TCA_ROUTE4_UNSPEC,
-	TCA_ROUTE4_CLASSID,
-	TCA_ROUTE4_TO,
-	TCA_ROUTE4_FROM,
-	TCA_ROUTE4_IIF,
-	TCA_ROUTE4_POLICE,
-	TCA_ROUTE4_ACT,
-	__TCA_ROUTE4_MAX
-};
-
-#define TCA_ROUTE4_MAX (__TCA_ROUTE4_MAX - 1)
-
-
-/* FW filter */
-
-enum {
-	TCA_FW_UNSPEC,
-	TCA_FW_CLASSID,
-	TCA_FW_POLICE,
-	TCA_FW_INDEV, /*  used by CONFIG_NET_CLS_IND */
-	TCA_FW_ACT, /* used by CONFIG_NET_CLS_ACT */
-	TCA_FW_MASK,
-	__TCA_FW_MAX
-};
-
-#define TCA_FW_MAX (__TCA_FW_MAX - 1)
-
-/* TC index filter */
-
-enum {
-	TCA_TCINDEX_UNSPEC,
-	TCA_TCINDEX_HASH,
-	TCA_TCINDEX_MASK,
-	TCA_TCINDEX_SHIFT,
-	TCA_TCINDEX_FALL_THROUGH,
-	TCA_TCINDEX_CLASSID,
-	TCA_TCINDEX_POLICE,
-	TCA_TCINDEX_ACT,
-	__TCA_TCINDEX_MAX
-};
-
-#define TCA_TCINDEX_MAX     (__TCA_TCINDEX_MAX - 1)
-
-/* Flow filter */
-
-enum {
-	FLOW_KEY_SRC,
-	FLOW_KEY_DST,
-	FLOW_KEY_PROTO,
-	FLOW_KEY_PROTO_SRC,
-	FLOW_KEY_PROTO_DST,
-	FLOW_KEY_IIF,
-	FLOW_KEY_PRIORITY,
-	FLOW_KEY_MARK,
-	FLOW_KEY_NFCT,
-	FLOW_KEY_NFCT_SRC,
-	FLOW_KEY_NFCT_DST,
-	FLOW_KEY_NFCT_PROTO_SRC,
-	FLOW_KEY_NFCT_PROTO_DST,
-	FLOW_KEY_RTCLASSID,
-	FLOW_KEY_SKUID,
-	FLOW_KEY_SKGID,
-	FLOW_KEY_VLAN_TAG,
-	FLOW_KEY_RXHASH,
-	__FLOW_KEY_MAX,
-};
-
-#define FLOW_KEY_MAX	(__FLOW_KEY_MAX - 1)
-
-enum {
-	FLOW_MODE_MAP,
-	FLOW_MODE_HASH,
-};
-
-enum {
-	TCA_FLOW_UNSPEC,
-	TCA_FLOW_KEYS,
-	TCA_FLOW_MODE,
-	TCA_FLOW_BASECLASS,
-	TCA_FLOW_RSHIFT,
-	TCA_FLOW_ADDEND,
-	TCA_FLOW_MASK,
-	TCA_FLOW_XOR,
-	TCA_FLOW_DIVISOR,
-	TCA_FLOW_ACT,
-	TCA_FLOW_POLICE,
-	TCA_FLOW_EMATCHES,
-	TCA_FLOW_PERTURB,
-	__TCA_FLOW_MAX
-};
-
-#define TCA_FLOW_MAX	(__TCA_FLOW_MAX - 1)
-
-/* Basic filter */
-
-enum {
-	TCA_BASIC_UNSPEC,
-	TCA_BASIC_CLASSID,
-	TCA_BASIC_EMATCHES,
-	TCA_BASIC_ACT,
-	TCA_BASIC_POLICE,
-	__TCA_BASIC_MAX
-};
-
-#define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1)
-
-
-/* Cgroup classifier */
-
-enum {
-	TCA_CGROUP_UNSPEC,
-	TCA_CGROUP_ACT,
-	TCA_CGROUP_POLICE,
-	TCA_CGROUP_EMATCHES,
-	__TCA_CGROUP_MAX,
-};
-
-#define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1)
-
-/* Extended Matches */
-
-struct tcf_ematch_tree_hdr {
-	__u16		nmatches;
-	__u16		progid;
-};
-
-enum {
-	TCA_EMATCH_TREE_UNSPEC,
-	TCA_EMATCH_TREE_HDR,
-	TCA_EMATCH_TREE_LIST,
-	__TCA_EMATCH_TREE_MAX
-};
-#define TCA_EMATCH_TREE_MAX (__TCA_EMATCH_TREE_MAX - 1)
-
-struct tcf_ematch_hdr {
-	__u16		matchid;
-	__u16		kind;
-	__u16		flags;
-	__u16		pad; /* currently unused */
-};
-
-/*  0                   1
- *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 
- * +-----------------------+-+-+---+
- * |         Unused        |S|I| R |
- * +-----------------------+-+-+---+
- *
- * R(2) ::= relation to next ematch
- *          where: 0 0 END (last ematch)
- *                 0 1 AND
- *                 1 0 OR
- *                 1 1 Unused (invalid)
- * I(1) ::= invert result
- * S(1) ::= simple payload
- */
-#define TCF_EM_REL_END	0
-#define TCF_EM_REL_AND	(1<<0)
-#define TCF_EM_REL_OR	(1<<1)
-#define TCF_EM_INVERT	(1<<2)
-#define TCF_EM_SIMPLE	(1<<3)
-
-#define TCF_EM_REL_MASK	3
-#define TCF_EM_REL_VALID(v) (((v) & TCF_EM_REL_MASK) != TCF_EM_REL_MASK)
-
-enum {
-	TCF_LAYER_LINK,
-	TCF_LAYER_NETWORK,
-	TCF_LAYER_TRANSPORT,
-	__TCF_LAYER_MAX
-};
-#define TCF_LAYER_MAX (__TCF_LAYER_MAX - 1)
-
-/* Ematch type assignments
- *   1..32767		Reserved for ematches inside kernel tree
- *   32768..65535	Free to use, not reliable
- */
-#define	TCF_EM_CONTAINER	0
-#define	TCF_EM_CMP		1
-#define	TCF_EM_NBYTE		2
-#define	TCF_EM_U32		3
-#define	TCF_EM_META		4
-#define	TCF_EM_TEXT		5
-#define	TCF_EM_VLAN		6
-#define	TCF_EM_CANID		7
-#define	TCF_EM_IPSET		8
-#define	TCF_EM_MAX		8
-
-enum {
-	TCF_EM_PROG_TC
-};
-
-enum {
-	TCF_EM_OPND_EQ,
-	TCF_EM_OPND_GT,
-	TCF_EM_OPND_LT
-};
-
-#endif
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
deleted file mode 100644
index 32aef0a439ef..000000000000
--- a/include/linux/pkt_sched.h
+++ /dev/null
@@ -1,738 +0,0 @@
-#ifndef __LINUX_PKT_SCHED_H
-#define __LINUX_PKT_SCHED_H
-
-#include <linux/types.h>
-
-/* Logical priority bands not depending on specific packet scheduler.
-   Every scheduler will map them to real traffic classes, if it has
-   no more precise mechanism to classify packets.
-
-   These numbers have no special meaning, though their coincidence
-   with obsolete IPv6 values is not occasional :-). New IPv6 drafts
-   preferred full anarchy inspired by diffserv group.
-
-   Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy
-   class, actually, as rule it will be handled with more care than
-   filler or even bulk.
- */
-
-#define TC_PRIO_BESTEFFORT		0
-#define TC_PRIO_FILLER			1
-#define TC_PRIO_BULK			2
-#define TC_PRIO_INTERACTIVE_BULK	4
-#define TC_PRIO_INTERACTIVE		6
-#define TC_PRIO_CONTROL			7
-
-#define TC_PRIO_MAX			15
-
-/* Generic queue statistics, available for all the elements.
-   Particular schedulers may have also their private records.
- */
-
-struct tc_stats {
-	__u64	bytes;			/* Number of enqueued bytes */
-	__u32	packets;		/* Number of enqueued packets	*/
-	__u32	drops;			/* Packets dropped because of lack of resources */
-	__u32	overlimits;		/* Number of throttle events when this
-					 * flow goes out of allocated bandwidth */
-	__u32	bps;			/* Current flow byte rate */
-	__u32	pps;			/* Current flow packet rate */
-	__u32	qlen;
-	__u32	backlog;
-};
-
-struct tc_estimator {
-	signed char	interval;
-	unsigned char	ewma_log;
-};
-
-/* "Handles"
-   ---------
-
-    All the traffic control objects have 32bit identifiers, or "handles".
-
-    They can be considered as opaque numbers from user API viewpoint,
-    but actually they always consist of two fields: major and
-    minor numbers, which are interpreted by kernel specially,
-    that may be used by applications, though not recommended.
-
-    F.e. qdisc handles always have minor number equal to zero,
-    classes (or flows) have major equal to parent qdisc major, and
-    minor uniquely identifying class inside qdisc.
-
-    Macros to manipulate handles:
- */
-
-#define TC_H_MAJ_MASK (0xFFFF0000U)
-#define TC_H_MIN_MASK (0x0000FFFFU)
-#define TC_H_MAJ(h) ((h)&TC_H_MAJ_MASK)
-#define TC_H_MIN(h) ((h)&TC_H_MIN_MASK)
-#define TC_H_MAKE(maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK))
-
-#define TC_H_UNSPEC	(0U)
-#define TC_H_ROOT	(0xFFFFFFFFU)
-#define TC_H_INGRESS    (0xFFFFFFF1U)
-
-struct tc_ratespec {
-	unsigned char	cell_log;
-	unsigned char	__reserved;
-	unsigned short	overhead;
-	short		cell_align;
-	unsigned short	mpu;
-	__u32		rate;
-};
-
-#define TC_RTAB_SIZE	1024
-
-struct tc_sizespec {
-	unsigned char	cell_log;
-	unsigned char	size_log;
-	short		cell_align;
-	int		overhead;
-	unsigned int	linklayer;
-	unsigned int	mpu;
-	unsigned int	mtu;
-	unsigned int	tsize;
-};
-
-enum {
-	TCA_STAB_UNSPEC,
-	TCA_STAB_BASE,
-	TCA_STAB_DATA,
-	__TCA_STAB_MAX
-};
-
-#define TCA_STAB_MAX (__TCA_STAB_MAX - 1)
-
-/* FIFO section */
-
-struct tc_fifo_qopt {
-	__u32	limit;	/* Queue length: bytes for bfifo, packets for pfifo */
-};
-
-/* PRIO section */
-
-#define TCQ_PRIO_BANDS	16
-#define TCQ_MIN_PRIO_BANDS 2
-
-struct tc_prio_qopt {
-	int	bands;			/* Number of bands */
-	__u8	priomap[TC_PRIO_MAX+1];	/* Map: logical priority -> PRIO band */
-};
-
-/* MULTIQ section */
-
-struct tc_multiq_qopt {
-	__u16	bands;			/* Number of bands */
-	__u16	max_bands;		/* Maximum number of queues */
-};
-
-/* PLUG section */
-
-#define TCQ_PLUG_BUFFER                0
-#define TCQ_PLUG_RELEASE_ONE           1
-#define TCQ_PLUG_RELEASE_INDEFINITE    2
-#define TCQ_PLUG_LIMIT                 3
-
-struct tc_plug_qopt {
-	/* TCQ_PLUG_BUFFER: Inset a plug into the queue and
-	 *  buffer any incoming packets
-	 * TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head
-	 *   to beginning of the next plug.
-	 * TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue.
-	 *   Stop buffering packets until the next TCQ_PLUG_BUFFER
-	 *   command is received (just act as a pass-thru queue).
-	 * TCQ_PLUG_LIMIT: Increase/decrease queue size
-	 */
-	int             action;
-	__u32           limit;
-};
-
-/* TBF section */
-
-struct tc_tbf_qopt {
-	struct tc_ratespec rate;
-	struct tc_ratespec peakrate;
-	__u32		limit;
-	__u32		buffer;
-	__u32		mtu;
-};
-
-enum {
-	TCA_TBF_UNSPEC,
-	TCA_TBF_PARMS,
-	TCA_TBF_RTAB,
-	TCA_TBF_PTAB,
-	__TCA_TBF_MAX,
-};
-
-#define TCA_TBF_MAX (__TCA_TBF_MAX - 1)
-
-
-/* TEQL section */
-
-/* TEQL does not require any parameters */
-
-/* SFQ section */
-
-struct tc_sfq_qopt {
-	unsigned	quantum;	/* Bytes per round allocated to flow */
-	int		perturb_period;	/* Period of hash perturbation */
-	__u32		limit;		/* Maximal packets in queue */
-	unsigned	divisor;	/* Hash divisor  */
-	unsigned	flows;		/* Maximal number of flows  */
-};
-
-struct tc_sfqred_stats {
-	__u32           prob_drop;      /* Early drops, below max threshold */
-	__u32           forced_drop;	/* Early drops, after max threshold */
-	__u32           prob_mark;      /* Marked packets, below max threshold */
-	__u32           forced_mark;    /* Marked packets, after max threshold */
-	__u32           prob_mark_head; /* Marked packets, below max threshold */
-	__u32           forced_mark_head;/* Marked packets, after max threshold */
-};
-
-struct tc_sfq_qopt_v1 {
-	struct tc_sfq_qopt v0;
-	unsigned int	depth;		/* max number of packets per flow */
-	unsigned int	headdrop;
-/* SFQRED parameters */
-	__u32		limit;		/* HARD maximal flow queue length (bytes) */
-	__u32		qth_min;	/* Min average length threshold (bytes) */
-	__u32		qth_max;	/* Max average length threshold (bytes) */
-	unsigned char   Wlog;		/* log(W)		*/
-	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
-	unsigned char   Scell_log;	/* cell size for idle damping */
-	unsigned char	flags;
-	__u32		max_P;		/* probability, high resolution */
-/* SFQRED stats */
-	struct tc_sfqred_stats stats;
-};
-
-
-struct tc_sfq_xstats {
-	__s32		allot;
-};
-
-/* RED section */
-
-enum {
-	TCA_RED_UNSPEC,
-	TCA_RED_PARMS,
-	TCA_RED_STAB,
-	TCA_RED_MAX_P,
-	__TCA_RED_MAX,
-};
-
-#define TCA_RED_MAX (__TCA_RED_MAX - 1)
-
-struct tc_red_qopt {
-	__u32		limit;		/* HARD maximal queue length (bytes)	*/
-	__u32		qth_min;	/* Min average length threshold (bytes) */
-	__u32		qth_max;	/* Max average length threshold (bytes) */
-	unsigned char   Wlog;		/* log(W)		*/
-	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
-	unsigned char   Scell_log;	/* cell size for idle damping */
-	unsigned char	flags;
-#define TC_RED_ECN		1
-#define TC_RED_HARDDROP		2
-#define TC_RED_ADAPTATIVE	4
-};
-
-struct tc_red_xstats {
-	__u32           early;          /* Early drops */
-	__u32           pdrop;          /* Drops due to queue limits */
-	__u32           other;          /* Drops due to drop() calls */
-	__u32           marked;         /* Marked packets */
-};
-
-/* GRED section */
-
-#define MAX_DPs 16
-
-enum {
-       TCA_GRED_UNSPEC,
-       TCA_GRED_PARMS,
-       TCA_GRED_STAB,
-       TCA_GRED_DPS,
-       TCA_GRED_MAX_P,
-	   __TCA_GRED_MAX,
-};
-
-#define TCA_GRED_MAX (__TCA_GRED_MAX - 1)
-
-struct tc_gred_qopt {
-	__u32		limit;        /* HARD maximal queue length (bytes)    */
-	__u32		qth_min;      /* Min average length threshold (bytes) */
-	__u32		qth_max;      /* Max average length threshold (bytes) */
-	__u32		DP;           /* up to 2^32 DPs */
-	__u32		backlog;
-	__u32		qave;
-	__u32		forced;
-	__u32		early;
-	__u32		other;
-	__u32		pdrop;
-	__u8		Wlog;         /* log(W)               */
-	__u8		Plog;         /* log(P_max/(qth_max-qth_min)) */
-	__u8		Scell_log;    /* cell size for idle damping */
-	__u8		prio;         /* prio of this VQ */
-	__u32		packets;
-	__u32		bytesin;
-};
-
-/* gred setup */
-struct tc_gred_sopt {
-	__u32		DPs;
-	__u32		def_DP;
-	__u8		grio;
-	__u8		flags;
-	__u16		pad1;
-};
-
-/* CHOKe section */
-
-enum {
-	TCA_CHOKE_UNSPEC,
-	TCA_CHOKE_PARMS,
-	TCA_CHOKE_STAB,
-	TCA_CHOKE_MAX_P,
-	__TCA_CHOKE_MAX,
-};
-
-#define TCA_CHOKE_MAX (__TCA_CHOKE_MAX - 1)
-
-struct tc_choke_qopt {
-	__u32		limit;		/* Hard queue length (packets)	*/
-	__u32		qth_min;	/* Min average threshold (packets) */
-	__u32		qth_max;	/* Max average threshold (packets) */
-	unsigned char   Wlog;		/* log(W)		*/
-	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
-	unsigned char   Scell_log;	/* cell size for idle damping */
-	unsigned char	flags;		/* see RED flags */
-};
-
-struct tc_choke_xstats {
-	__u32		early;          /* Early drops */
-	__u32		pdrop;          /* Drops due to queue limits */
-	__u32		other;          /* Drops due to drop() calls */
-	__u32		marked;         /* Marked packets */
-	__u32		matched;	/* Drops due to flow match */
-};
-
-/* HTB section */
-#define TC_HTB_NUMPRIO		8
-#define TC_HTB_MAXDEPTH		8
-#define TC_HTB_PROTOVER		3 /* the same as HTB and TC's major */
-
-struct tc_htb_opt {
-	struct tc_ratespec 	rate;
-	struct tc_ratespec 	ceil;
-	__u32	buffer;
-	__u32	cbuffer;
-	__u32	quantum;
-	__u32	level;		/* out only */
-	__u32	prio;
-};
-struct tc_htb_glob {
-	__u32 version;		/* to match HTB/TC */
-    	__u32 rate2quantum;	/* bps->quantum divisor */
-    	__u32 defcls;		/* default class number */
-	__u32 debug;		/* debug flags */
-
-	/* stats */
-	__u32 direct_pkts; /* count of non shaped packets */
-};
-enum {
-	TCA_HTB_UNSPEC,
-	TCA_HTB_PARMS,
-	TCA_HTB_INIT,
-	TCA_HTB_CTAB,
-	TCA_HTB_RTAB,
-	__TCA_HTB_MAX,
-};
-
-#define TCA_HTB_MAX (__TCA_HTB_MAX - 1)
-
-struct tc_htb_xstats {
-	__u32 lends;
-	__u32 borrows;
-	__u32 giants;	/* too big packets (rate will not be accurate) */
-	__u32 tokens;
-	__u32 ctokens;
-};
-
-/* HFSC section */
-
-struct tc_hfsc_qopt {
-	__u16	defcls;		/* default class */
-};
-
-struct tc_service_curve {
-	__u32	m1;		/* slope of the first segment in bps */
-	__u32	d;		/* x-projection of the first segment in us */
-	__u32	m2;		/* slope of the second segment in bps */
-};
-
-struct tc_hfsc_stats {
-	__u64	work;		/* total work done */
-	__u64	rtwork;		/* work done by real-time criteria */
-	__u32	period;		/* current period */
-	__u32	level;		/* class level in hierarchy */
-};
-
-enum {
-	TCA_HFSC_UNSPEC,
-	TCA_HFSC_RSC,
-	TCA_HFSC_FSC,
-	TCA_HFSC_USC,
-	__TCA_HFSC_MAX,
-};
-
-#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1)
-
-
-/* CBQ section */
-
-#define TC_CBQ_MAXPRIO		8
-#define TC_CBQ_MAXLEVEL		8
-#define TC_CBQ_DEF_EWMA		5
-
-struct tc_cbq_lssopt {
-	unsigned char	change;
-	unsigned char	flags;
-#define TCF_CBQ_LSS_BOUNDED	1
-#define TCF_CBQ_LSS_ISOLATED	2
-	unsigned char  	ewma_log;
-	unsigned char  	level;
-#define TCF_CBQ_LSS_FLAGS	1
-#define TCF_CBQ_LSS_EWMA	2
-#define TCF_CBQ_LSS_MAXIDLE	4
-#define TCF_CBQ_LSS_MINIDLE	8
-#define TCF_CBQ_LSS_OFFTIME	0x10
-#define TCF_CBQ_LSS_AVPKT	0x20
-	__u32		maxidle;
-	__u32		minidle;
-	__u32		offtime;
-	__u32		avpkt;
-};
-
-struct tc_cbq_wrropt {
-	unsigned char	flags;
-	unsigned char	priority;
-	unsigned char	cpriority;
-	unsigned char	__reserved;
-	__u32		allot;
-	__u32		weight;
-};
-
-struct tc_cbq_ovl {
-	unsigned char	strategy;
-#define	TC_CBQ_OVL_CLASSIC	0
-#define	TC_CBQ_OVL_DELAY	1
-#define	TC_CBQ_OVL_LOWPRIO	2
-#define	TC_CBQ_OVL_DROP		3
-#define	TC_CBQ_OVL_RCLASSIC	4
-	unsigned char	priority2;
-	__u16		pad;
-	__u32		penalty;
-};
-
-struct tc_cbq_police {
-	unsigned char	police;
-	unsigned char	__res1;
-	unsigned short	__res2;
-};
-
-struct tc_cbq_fopt {
-	__u32		split;
-	__u32		defmap;
-	__u32		defchange;
-};
-
-struct tc_cbq_xstats {
-	__u32		borrows;
-	__u32		overactions;
-	__s32		avgidle;
-	__s32		undertime;
-};
-
-enum {
-	TCA_CBQ_UNSPEC,
-	TCA_CBQ_LSSOPT,
-	TCA_CBQ_WRROPT,
-	TCA_CBQ_FOPT,
-	TCA_CBQ_OVL_STRATEGY,
-	TCA_CBQ_RATE,
-	TCA_CBQ_RTAB,
-	TCA_CBQ_POLICE,
-	__TCA_CBQ_MAX,
-};
-
-#define TCA_CBQ_MAX	(__TCA_CBQ_MAX - 1)
-
-/* dsmark section */
-
-enum {
-	TCA_DSMARK_UNSPEC,
-	TCA_DSMARK_INDICES,
-	TCA_DSMARK_DEFAULT_INDEX,
-	TCA_DSMARK_SET_TC_INDEX,
-	TCA_DSMARK_MASK,
-	TCA_DSMARK_VALUE,
-	__TCA_DSMARK_MAX,
-};
-
-#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1)
-
-/* ATM  section */
-
-enum {
-	TCA_ATM_UNSPEC,
-	TCA_ATM_FD,		/* file/socket descriptor */
-	TCA_ATM_PTR,		/* pointer to descriptor - later */
-	TCA_ATM_HDR,		/* LL header */
-	TCA_ATM_EXCESS,		/* excess traffic class (0 for CLP)  */
-	TCA_ATM_ADDR,		/* PVC address (for output only) */
-	TCA_ATM_STATE,		/* VC state (ATM_VS_*; for output only) */
-	__TCA_ATM_MAX,
-};
-
-#define TCA_ATM_MAX	(__TCA_ATM_MAX - 1)
-
-/* Network emulator */
-
-enum {
-	TCA_NETEM_UNSPEC,
-	TCA_NETEM_CORR,
-	TCA_NETEM_DELAY_DIST,
-	TCA_NETEM_REORDER,
-	TCA_NETEM_CORRUPT,
-	TCA_NETEM_LOSS,
-	TCA_NETEM_RATE,
-	TCA_NETEM_ECN,
-	__TCA_NETEM_MAX,
-};
-
-#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1)
-
-struct tc_netem_qopt {
-	__u32	latency;	/* added delay (us) */
-	__u32   limit;		/* fifo limit (packets) */
-	__u32	loss;		/* random packet loss (0=none ~0=100%) */
-	__u32	gap;		/* re-ordering gap (0 for none) */
-	__u32   duplicate;	/* random packet dup  (0=none ~0=100%) */
-	__u32	jitter;		/* random jitter in latency (us) */
-};
-
-struct tc_netem_corr {
-	__u32	delay_corr;	/* delay correlation */
-	__u32	loss_corr;	/* packet loss correlation */
-	__u32	dup_corr;	/* duplicate correlation  */
-};
-
-struct tc_netem_reorder {
-	__u32	probability;
-	__u32	correlation;
-};
-
-struct tc_netem_corrupt {
-	__u32	probability;
-	__u32	correlation;
-};
-
-struct tc_netem_rate {
-	__u32	rate;	/* byte/s */
-	__s32	packet_overhead;
-	__u32	cell_size;
-	__s32	cell_overhead;
-};
-
-enum {
-	NETEM_LOSS_UNSPEC,
-	NETEM_LOSS_GI,		/* General Intuitive - 4 state model */
-	NETEM_LOSS_GE,		/* Gilbert Elliot models */
-	__NETEM_LOSS_MAX
-};
-#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1)
-
-/* State transition probabilities for 4 state model */
-struct tc_netem_gimodel {
-	__u32	p13;
-	__u32	p31;
-	__u32	p32;
-	__u32	p14;
-	__u32	p23;
-};
-
-/* Gilbert-Elliot models */
-struct tc_netem_gemodel {
-	__u32 p;
-	__u32 r;
-	__u32 h;
-	__u32 k1;
-};
-
-#define NETEM_DIST_SCALE	8192
-#define NETEM_DIST_MAX		16384
-
-/* DRR */
-
-enum {
-	TCA_DRR_UNSPEC,
-	TCA_DRR_QUANTUM,
-	__TCA_DRR_MAX
-};
-
-#define TCA_DRR_MAX	(__TCA_DRR_MAX - 1)
-
-struct tc_drr_stats {
-	__u32	deficit;
-};
-
-/* MQPRIO */
-#define TC_QOPT_BITMASK 15
-#define TC_QOPT_MAX_QUEUE 16
-
-struct tc_mqprio_qopt {
-	__u8	num_tc;
-	__u8	prio_tc_map[TC_QOPT_BITMASK + 1];
-	__u8	hw;
-	__u16	count[TC_QOPT_MAX_QUEUE];
-	__u16	offset[TC_QOPT_MAX_QUEUE];
-};
-
-/* SFB */
-
-enum {
-	TCA_SFB_UNSPEC,
-	TCA_SFB_PARMS,
-	__TCA_SFB_MAX,
-};
-
-#define TCA_SFB_MAX (__TCA_SFB_MAX - 1)
-
-/*
- * Note: increment, decrement are Q0.16 fixed-point values.
- */
-struct tc_sfb_qopt {
-	__u32 rehash_interval;	/* delay between hash move, in ms */
-	__u32 warmup_time;	/* double buffering warmup time in ms (warmup_time < rehash_interval) */
-	__u32 max;		/* max len of qlen_min */
-	__u32 bin_size;		/* maximum queue length per bin */
-	__u32 increment;	/* probability increment, (d1 in Blue) */
-	__u32 decrement;	/* probability decrement, (d2 in Blue) */
-	__u32 limit;		/* max SFB queue length */
-	__u32 penalty_rate;	/* inelastic flows are rate limited to 'rate' pps */
-	__u32 penalty_burst;
-};
-
-struct tc_sfb_xstats {
-	__u32 earlydrop;
-	__u32 penaltydrop;
-	__u32 bucketdrop;
-	__u32 queuedrop;
-	__u32 childdrop; /* drops in child qdisc */
-	__u32 marked;
-	__u32 maxqlen;
-	__u32 maxprob;
-	__u32 avgprob;
-};
-
-#define SFB_MAX_PROB 0xFFFF
-
-/* QFQ */
-enum {
-	TCA_QFQ_UNSPEC,
-	TCA_QFQ_WEIGHT,
-	TCA_QFQ_LMAX,
-	__TCA_QFQ_MAX
-};
-
-#define TCA_QFQ_MAX	(__TCA_QFQ_MAX - 1)
-
-struct tc_qfq_stats {
-	__u32 weight;
-	__u32 lmax;
-};
-
-/* CODEL */
-
-enum {
-	TCA_CODEL_UNSPEC,
-	TCA_CODEL_TARGET,
-	TCA_CODEL_LIMIT,
-	TCA_CODEL_INTERVAL,
-	TCA_CODEL_ECN,
-	__TCA_CODEL_MAX
-};
-
-#define TCA_CODEL_MAX	(__TCA_CODEL_MAX - 1)
-
-struct tc_codel_xstats {
-	__u32	maxpacket; /* largest packet we've seen so far */
-	__u32	count;	   /* how many drops we've done since the last time we
-			    * entered dropping state
-			    */
-	__u32	lastcount; /* count at entry to dropping state */
-	__u32	ldelay;    /* in-queue delay seen by most recently dequeued packet */
-	__s32	drop_next; /* time to drop next packet */
-	__u32	drop_overlimit; /* number of time max qdisc packet limit was hit */
-	__u32	ecn_mark;  /* number of packets we ECN marked instead of dropped */
-	__u32	dropping;  /* are we in dropping state ? */
-};
-
-/* FQ_CODEL */
-
-enum {
-	TCA_FQ_CODEL_UNSPEC,
-	TCA_FQ_CODEL_TARGET,
-	TCA_FQ_CODEL_LIMIT,
-	TCA_FQ_CODEL_INTERVAL,
-	TCA_FQ_CODEL_ECN,
-	TCA_FQ_CODEL_FLOWS,
-	TCA_FQ_CODEL_QUANTUM,
-	__TCA_FQ_CODEL_MAX
-};
-
-#define TCA_FQ_CODEL_MAX	(__TCA_FQ_CODEL_MAX - 1)
-
-enum {
-	TCA_FQ_CODEL_XSTATS_QDISC,
-	TCA_FQ_CODEL_XSTATS_CLASS,
-};
-
-struct tc_fq_codel_qd_stats {
-	__u32	maxpacket;	/* largest packet we've seen so far */
-	__u32	drop_overlimit; /* number of time max qdisc
-				 * packet limit was hit
-				 */
-	__u32	ecn_mark;	/* number of packets we ECN marked
-				 * instead of being dropped
-				 */
-	__u32	new_flow_count; /* number of time packets
-				 * created a 'new flow'
-				 */
-	__u32	new_flows_len;	/* count of flows in new list */
-	__u32	old_flows_len;	/* count of flows in old list */
-};
-
-struct tc_fq_codel_cl_stats {
-	__s32	deficit;
-	__u32	ldelay;		/* in-queue delay seen by most recently
-				 * dequeued packet
-				 */
-	__u32	count;
-	__u32	lastcount;
-	__u32	dropping;
-	__s32	drop_next;
-};
-
-struct tc_fq_codel_xstats {
-	__u32	type;
-	union {
-		struct tc_fq_codel_qd_stats qdisc_stats;
-		struct tc_fq_codel_cl_stats class_stats;
-	};
-};
-
-#endif
diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
index 721301b0a908..93d142ad1528 100644
--- a/include/linux/pktcdvd.h
+++ b/include/linux/pktcdvd.h
@@ -12,108 +12,13 @@
 #ifndef __PKTCDVD_H
 #define __PKTCDVD_H
 
-#include <linux/types.h>
-
-/*
- * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
- */
-#define PACKET_DEBUG		1
-
-#define	MAX_WRITERS		8
-
-#define PKT_RB_POOL_SIZE	512
-
-/*
- * How long we should hold a non-full packet before starting data gathering.
- */
-#define PACKET_WAIT_TIME	(HZ * 5 / 1000)
-
-/*
- * use drive write caching -- we need deferred error handling to be
- * able to successfully recover with this option (drive will return good
- * status as soon as the cdb is validated).
- */
-#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
-#define USE_WCACHING		1
-#else
-#define USE_WCACHING		0
-#endif
-
-/*
- * No user-servicable parts beyond this point ->
- */
-
-/*
- * device types
- */
-#define PACKET_CDR		1
-#define	PACKET_CDRW		2
-#define PACKET_DVDR		3
-#define PACKET_DVDRW		4
-
-/*
- * flags
- */
-#define PACKET_WRITABLE		1	/* pd is writable */
-#define PACKET_NWA_VALID	2	/* next writable address valid */
-#define PACKET_LRA_VALID	3	/* last recorded address valid */
-#define PACKET_MERGE_SEGS	4	/* perform segment merging to keep */
-					/* underlying cdrom device happy */
-
-/*
- * Disc status -- from READ_DISC_INFO
- */
-#define PACKET_DISC_EMPTY	0
-#define PACKET_DISC_INCOMPLETE	1
-#define PACKET_DISC_COMPLETE	2
-#define PACKET_DISC_OTHER	3
-
-/*
- * write type, and corresponding data block type
- */
-#define PACKET_MODE1		1
-#define PACKET_MODE2		2
-#define PACKET_BLOCK_MODE1	8
-#define PACKET_BLOCK_MODE2	10
-
-/*
- * Last session/border status
- */
-#define PACKET_SESSION_EMPTY		0
-#define PACKET_SESSION_INCOMPLETE	1
-#define PACKET_SESSION_RESERVED		2
-#define PACKET_SESSION_COMPLETE		3
-
-#define PACKET_MCN			"4a656e734178626f65323030300000"
-
-#undef PACKET_USE_LS
-
-#define PKT_CTRL_CMD_SETUP	0
-#define PKT_CTRL_CMD_TEARDOWN	1
-#define PKT_CTRL_CMD_STATUS	2
-
-struct pkt_ctrl_command {
-	__u32 command;				/* in: Setup, teardown, status */
-	__u32 dev_index;			/* in/out: Device index */
-	__u32 dev;				/* in/out: Device nr for cdrw device */
-	__u32 pkt_dev;				/* in/out: Device nr for packet device */
-	__u32 num_devices;			/* out: Largest device index + 1 */
-	__u32 padding;				/* Not used */
-};
-
-/*
- * packet ioctls
- */
-#define PACKET_IOCTL_MAGIC	('X')
-#define PACKET_CTRL_CMD		_IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
-
-#ifdef __KERNEL__
 #include <linux/blkdev.h>
 #include <linux/completion.h>
 #include <linux/cdrom.h>
 #include <linux/kobject.h>
 #include <linux/sysfs.h>
 #include <linux/mempool.h>
+#include <uapi/linux/pktcdvd.h>
 
 /* default bio write queue congestion marks */
 #define PKT_WRITE_CONGESTION_ON    10000
@@ -297,6 +202,4 @@ struct pktcdvd_device
 	struct dentry		*dfs_f_info;	/* debugfs: info file */
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* __PKTCDVD_H */
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
index 84e6a55a1202..99b400b8a241 100644
--- a/include/linux/pmu.h
+++ b/include/linux/pmu.h
@@ -5,137 +5,11 @@
  *
  * Copyright (C) 1998 Paul Mackerras.
  */
-
 #ifndef _LINUX_PMU_H
 #define _LINUX_PMU_H
 
-#define PMU_DRIVER_VERSION	2
-
-/*
- * PMU commands
- */
-#define PMU_POWER_CTRL0		0x10	/* control power of some devices */
-#define PMU_POWER_CTRL		0x11	/* control power of some devices */
-#define PMU_ADB_CMD		0x20	/* send ADB packet */
-#define PMU_ADB_POLL_OFF	0x21	/* disable ADB auto-poll */
-#define PMU_WRITE_NVRAM		0x33	/* write non-volatile RAM */
-#define PMU_READ_NVRAM		0x3b	/* read non-volatile RAM */
-#define PMU_SET_RTC		0x30	/* set real-time clock */
-#define PMU_READ_RTC		0x38	/* read real-time clock */
-#define PMU_SET_VOLBUTTON	0x40	/* set volume up/down position */
-#define PMU_BACKLIGHT_BRIGHT	0x41	/* set backlight brightness */
-#define PMU_GET_VOLBUTTON	0x48	/* get volume up/down position */
-#define PMU_PCEJECT		0x4c	/* eject PC-card from slot */
-#define PMU_BATTERY_STATE	0x6b	/* report battery state etc. */
-#define PMU_SMART_BATTERY_STATE	0x6f	/* report battery state (new way) */
-#define PMU_SET_INTR_MASK	0x70	/* set PMU interrupt mask */
-#define PMU_INT_ACK		0x78	/* read interrupt bits */
-#define PMU_SHUTDOWN		0x7e	/* turn power off */
-#define PMU_CPU_SPEED		0x7d	/* control CPU speed on some models */
-#define PMU_SLEEP		0x7f	/* put CPU to sleep */
-#define PMU_POWER_EVENTS	0x8f	/* Send power-event commands to PMU */
-#define PMU_I2C_CMD		0x9a	/* I2C operations */
-#define PMU_RESET		0xd0	/* reset CPU */
-#define PMU_GET_BRIGHTBUTTON	0xd9	/* report brightness up/down pos */
-#define PMU_GET_COVER		0xdc	/* report cover open/closed */
-#define PMU_SYSTEM_READY	0xdf	/* tell PMU we are awake */
-#define PMU_GET_VERSION		0xea	/* read the PMU version */
-
-/* Bits to use with the PMU_POWER_CTRL0 command */
-#define PMU_POW0_ON		0x80	/* OR this to power ON the device */
-#define PMU_POW0_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
-#define PMU_POW0_HARD_DRIVE	0x04	/* Hard drive power (on wallstreet/lombard ?) */
-
-/* Bits to use with the PMU_POWER_CTRL command */
-#define PMU_POW_ON		0x80	/* OR this to power ON the device */
-#define PMU_POW_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
-#define PMU_POW_BACKLIGHT	0x01	/* backlight power */
-#define PMU_POW_CHARGER		0x02	/* battery charger power */
-#define PMU_POW_IRLED		0x04	/* IR led power (on wallstreet) */
-#define PMU_POW_MEDIABAY	0x08	/* media bay power (wallstreet/lombard ?) */
-
-/* Bits in PMU interrupt and interrupt mask bytes */
-#define PMU_INT_PCEJECT		0x04	/* PC-card eject buttons */
-#define PMU_INT_SNDBRT		0x08	/* sound/brightness up/down buttons */
-#define PMU_INT_ADB		0x10	/* ADB autopoll or reply data */
-#define PMU_INT_BATTERY		0x20	/* Battery state change */
-#define PMU_INT_ENVIRONMENT	0x40	/* Environment interrupts */
-#define PMU_INT_TICK		0x80	/* 1-second tick interrupt */
-
-/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
-#define PMU_INT_ADB_AUTO	0x04	/* ADB autopoll, when PMU_INT_ADB */
-#define PMU_INT_WAITING_CHARGER	0x01	/* ??? */
-#define PMU_INT_AUTO_SRQ_POLL	0x02	/* ??? */
-
-/* Bits in the environement message (either obtained via PMU_GET_COVER,
- * or via PMU_INT_ENVIRONMENT on core99 */
-#define PMU_ENV_LID_CLOSED	0x01	/* The lid is closed */
-
-/* I2C related definitions */
-#define PMU_I2C_MODE_SIMPLE	0
-#define PMU_I2C_MODE_STDSUB	1
-#define PMU_I2C_MODE_COMBINED	2
-
-#define PMU_I2C_BUS_STATUS	0
-#define PMU_I2C_BUS_SYSCLK	1
-#define PMU_I2C_BUS_POWER	2
-
-#define PMU_I2C_STATUS_OK	0
-#define PMU_I2C_STATUS_DATAREAD	1
-#define PMU_I2C_STATUS_BUSY	0xfe
-
-
-/* Kind of PMU (model) */
-enum {
-	PMU_UNKNOWN,
-	PMU_OHARE_BASED,	/* 2400, 3400, 3500 (old G3 powerbook) */
-	PMU_HEATHROW_BASED,	/* PowerBook G3 series */
-	PMU_PADDINGTON_BASED,	/* 1999 PowerBook G3 */
-	PMU_KEYLARGO_BASED,	/* Core99 motherboard (PMU99) */
-	PMU_68K_V1,		/* 68K PMU, version 1 */
-	PMU_68K_V2, 		/* 68K PMU, version 2 */
-};
+#include <uapi/linux/pmu.h>
 
-/* PMU PMU_POWER_EVENTS commands */
-enum {
-	PMU_PWR_GET_POWERUP_EVENTS	= 0x00,
-	PMU_PWR_SET_POWERUP_EVENTS	= 0x01,
-	PMU_PWR_CLR_POWERUP_EVENTS	= 0x02,
-	PMU_PWR_GET_WAKEUP_EVENTS	= 0x03,
-	PMU_PWR_SET_WAKEUP_EVENTS	= 0x04,
-	PMU_PWR_CLR_WAKEUP_EVENTS	= 0x05,
-};
-
-/* Power events wakeup bits */
-enum {
-	PMU_PWR_WAKEUP_KEY		= 0x01,	/* Wake on key press */
-	PMU_PWR_WAKEUP_AC_INSERT	= 0x02, /* Wake on AC adapter plug */
-	PMU_PWR_WAKEUP_AC_CHANGE	= 0x04,
-	PMU_PWR_WAKEUP_LID_OPEN		= 0x08,
-	PMU_PWR_WAKEUP_RING		= 0x10,
-};
-	
-/*
- * Ioctl commands for the /dev/pmu device
- */
-#include <linux/ioctl.h>
-
-/* no param */
-#define PMU_IOC_SLEEP		_IO('B', 0)
-/* out param: u32*	backlight value: 0 to 15 */
-#define PMU_IOC_GET_BACKLIGHT	_IOR('B', 1, size_t)
-/* in param: u32	backlight value: 0 to 15 */
-#define PMU_IOC_SET_BACKLIGHT	_IOW('B', 2, size_t)
-/* out param: u32*	PMU model */
-#define PMU_IOC_GET_MODEL	_IOR('B', 3, size_t)
-/* out param: u32*	has_adb: 0 or 1 */
-#define PMU_IOC_HAS_ADB		_IOR('B', 4, size_t) 
-/* out param: u32*	can_sleep: 0 or 1 */
-#define PMU_IOC_CAN_SLEEP	_IOR('B', 5, size_t) 
-/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
-#define PMU_IOC_GRAB_BACKLIGHT	_IOR('B', 6, size_t) 
-
-#ifdef __KERNEL__
 
 extern int find_via_pmu(void);
 
@@ -208,6 +82,4 @@ extern int pmu_sys_suspended;
 #define pmu_sys_suspended	0
 #endif
 
-#endif	/* __KERNEL__ */
-
 #endif /* _LINUX_PMU_H */
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 48fe8bc398d1..c08386fb3e08 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -1,9 +1,6 @@
 #ifndef _LINUX_POLL_H
 #define _LINUX_POLL_H
 
-#include <asm/poll.h>
-
-#ifdef __KERNEL__
 
 #include <linux/compiler.h>
 #include <linux/ktime.h>
@@ -12,6 +9,7 @@
 #include <linux/fs.h>
 #include <linux/sysctl.h>
 #include <asm/uaccess.h>
+#include <uapi/linux/poll.h>
 
 extern struct ctl_table epoll_table[]; /* for sysctl */
 /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
@@ -163,6 +161,4 @@ extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 
 extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec);
 
-#endif /* KERNEL */
-
 #endif /* _LINUX_POLL_H */
diff --git a/include/linux/posix_types.h b/include/linux/posix_types.h
deleted file mode 100644
index 988f76e636e3..000000000000
--- a/include/linux/posix_types.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _LINUX_POSIX_TYPES_H
-#define _LINUX_POSIX_TYPES_H
-
-#include <linux/stddef.h>
-
-/*
- * This allows for 1024 file descriptors: if NR_OPEN is ever grown
- * beyond that you'll have to change this too. But 1024 fd's seem to be
- * enough even for such "real" unices like OSF/1, so hopefully this is
- * one limit that doesn't have to be changed [again].
- *
- * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in
- * <sys/time.h> (and thus <linux/time.h>) - but this is a more logical
- * place for them. Solved by having dummy defines in <sys/time.h>.
- */
-
-/*
- * This macro may have been defined in <gnu/types.h>. But we always
- * use the one here.
- */
-#undef __FD_SETSIZE
-#define __FD_SETSIZE	1024
-
-typedef struct {
-	unsigned long fds_bits[__FD_SETSIZE / (8 * sizeof(long))];
-} __kernel_fd_set;
-
-/* Type of a signal handler.  */
-typedef void (*__kernel_sighandler_t)(int);
-
-/* Type of a SYSV IPC key.  */
-typedef int __kernel_key_t;
-typedef int __kernel_mqd_t;
-
-#include <asm/posix_types.h>
-
-#endif /* _LINUX_POSIX_TYPES_H */
diff --git a/include/linux/ppdev.h b/include/linux/ppdev.h
deleted file mode 100644
index dc18c5d23ebe..000000000000
--- a/include/linux/ppdev.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/include/linux/ppdev.h
- *
- * User-space parallel port device driver (header file).
- *
- * Copyright (C) 1998-9 Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Added PPGETTIME/PPSETTIME, Fred Barnes, 1999
- * Added PPGETMODES/PPGETMODE/PPGETPHASE, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001
- */
-
-#define PP_IOCTL	'p'
-
-/* Set mode for read/write (e.g. IEEE1284_MODE_EPP) */
-#define PPSETMODE	_IOW(PP_IOCTL, 0x80, int)
-
-/* Read status */
-#define PPRSTATUS	_IOR(PP_IOCTL, 0x81, unsigned char)
-#define PPWSTATUS	OBSOLETE__IOW(PP_IOCTL, 0x82, unsigned char)
-
-/* Read/write control */
-#define PPRCONTROL	_IOR(PP_IOCTL, 0x83, unsigned char)
-#define PPWCONTROL	_IOW(PP_IOCTL, 0x84, unsigned char)
-
-struct ppdev_frob_struct {
-	unsigned char mask;
-	unsigned char val;
-};
-#define PPFCONTROL      _IOW(PP_IOCTL, 0x8e, struct ppdev_frob_struct)
-
-/* Read/write data */
-#define PPRDATA		_IOR(PP_IOCTL, 0x85, unsigned char)
-#define PPWDATA		_IOW(PP_IOCTL, 0x86, unsigned char)
-
-/* Read/write econtrol (not used) */
-#define PPRECONTROL	OBSOLETE__IOR(PP_IOCTL, 0x87, unsigned char)
-#define PPWECONTROL	OBSOLETE__IOW(PP_IOCTL, 0x88, unsigned char)
-
-/* Read/write FIFO (not used) */
-#define PPRFIFO		OBSOLETE__IOR(PP_IOCTL, 0x89, unsigned char)
-#define PPWFIFO		OBSOLETE__IOW(PP_IOCTL, 0x8a, unsigned char)
-
-/* Claim the port to start using it */
-#define PPCLAIM		_IO(PP_IOCTL, 0x8b)
-
-/* Release the port when you aren't using it */
-#define PPRELEASE	_IO(PP_IOCTL, 0x8c)
-
-/* Yield the port (release it if another driver is waiting,
- * then reclaim) */
-#define PPYIELD		_IO(PP_IOCTL, 0x8d)
-
-/* Register device exclusively (must be before PPCLAIM). */
-#define PPEXCL		_IO(PP_IOCTL, 0x8f)
-
-/* Data line direction: non-zero for input mode. */
-#define PPDATADIR	_IOW(PP_IOCTL, 0x90, int)
-
-/* Negotiate a particular IEEE 1284 mode. */
-#define PPNEGOT		_IOW(PP_IOCTL, 0x91, int)
-
-/* Set control lines when an interrupt occurs. */
-#define PPWCTLONIRQ	_IOW(PP_IOCTL, 0x92, unsigned char)
-
-/* Clear (and return) interrupt count. */
-#define PPCLRIRQ	_IOR(PP_IOCTL, 0x93, int)
-
-/* Set the IEEE 1284 phase that we're in (e.g. IEEE1284_PH_FWD_IDLE) */
-#define PPSETPHASE	_IOW(PP_IOCTL, 0x94, int)
-
-/* Set and get port timeout (struct timeval's) */
-#define PPGETTIME	_IOR(PP_IOCTL, 0x95, struct timeval)
-#define PPSETTIME	_IOW(PP_IOCTL, 0x96, struct timeval)
-
-/* Get available modes (what the hardware can do) */
-#define PPGETMODES	_IOR(PP_IOCTL, 0x97, unsigned int)
-
-/* Get the current mode and phaze */
-#define PPGETMODE	_IOR(PP_IOCTL, 0x98, int)
-#define PPGETPHASE	_IOR(PP_IOCTL, 0x99, int)
-
-/* get/set flags */
-#define PPGETFLAGS	_IOR(PP_IOCTL, 0x9a, int)
-#define PPSETFLAGS	_IOW(PP_IOCTL, 0x9b, int)
-
-/* flags visible to the world */
-#define PP_FASTWRITE	(1<<2)
-#define PP_FASTREAD	(1<<3)
-#define PP_W91284PIC	(1<<4)
-
-/* only masks user-visible flags */
-#define PP_FLAGMASK	(PP_FASTWRITE | PP_FASTREAD | PP_W91284PIC)
-
-
diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h
index b7dc06f7f1d1..4ea1d377e1ad 100644
--- a/include/linux/ppp-comp.h
+++ b/include/linux/ppp-comp.h
@@ -10,7 +10,8 @@
 #ifndef _NET_PPP_COMP_H
 #define _NET_PPP_COMP_H
 
-#ifdef __KERNEL__
+#include <uapi/linux/ppp-comp.h>
+
 
 struct module;
 
@@ -100,89 +101,6 @@ struct compressor {
 #define DECOMP_ERROR		-1	/* error detected before decomp. */
 #define DECOMP_FATALERROR	-2	/* error detected after decomp. */
 
-#endif /* __KERNEL__ */
-
-/*
- * CCP codes.
- */
-
-#define CCP_CONFREQ	1
-#define CCP_CONFACK	2
-#define CCP_TERMREQ	5
-#define CCP_TERMACK	6
-#define CCP_RESETREQ	14
-#define CCP_RESETACK	15
-
-/*
- * Max # bytes for a CCP option
- */
-
-#define CCP_MAX_OPTION_LENGTH	32
-
-/*
- * Parts of a CCP packet.
- */
-
-#define CCP_CODE(dp)		((dp)[0])
-#define CCP_ID(dp)		((dp)[1])
-#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN		4
-
-#define CCP_OPT_CODE(dp)	((dp)[0])
-#define CCP_OPT_LENGTH(dp)	((dp)[1])
-#define CCP_OPT_MINLEN		2
-
-/*
- * Definitions for BSD-Compress.
- */
-
-#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS	3	/* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
-#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
-#define BSD_CURRENT_VERSION	1		/* current version number */
-#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
-
-#define BSD_MIN_BITS		9	/* smallest code size supported */
-#define BSD_MAX_BITS		15	/* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-
-#define CI_DEFLATE		26	/* config option for Deflate */
-#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
-#define CILEN_DEFLATE		4	/* length of its config option */
-
-#define DEFLATE_MIN_SIZE	9
-#define DEFLATE_MAX_SIZE	15
-#define DEFLATE_METHOD_VAL	8
-#define DEFLATE_SIZE(x)		(((x) >> 4) + 8)
-#define DEFLATE_METHOD(x)	((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w)	((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE	0
-
-/*
- * Definitions for MPPE.
- */
-
-#define CI_MPPE                18      /* config option for MPPE */
-#define CILEN_MPPE              6      /* length of config option */
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-
-#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1	2	/* length of its config option */
-#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2	2	/* length of its config option */
-
-#ifdef __KERNEL__
 extern int ppp_register_compressor(struct compressor *);
 extern void ppp_unregister_compressor(struct compressor *);
-#endif /* __KERNEL__ */
-
 #endif /* _NET_PPP_COMP_H */
diff --git a/include/linux/ppp-ioctl.h b/include/linux/ppp-ioctl.h
deleted file mode 100644
index 2d9a8859550a..000000000000
--- a/include/linux/ppp-ioctl.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * ppp-ioctl.h - PPP ioctl definitions.
- *
- * Copyright 1999-2002 Paul Mackerras.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- */
-#ifndef _PPP_IOCTL_H
-#define _PPP_IOCTL_H
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-/*
- * Bit definitions for flags argument to PPPIOCGFLAGS/PPPIOCSFLAGS.
- */
-#define SC_COMP_PROT	0x00000001	/* protocol compression (output) */
-#define SC_COMP_AC	0x00000002	/* header compression (output) */
-#define	SC_COMP_TCP	0x00000004	/* TCP (VJ) compression (output) */
-#define SC_NO_TCP_CCID	0x00000008	/* disable VJ connection-id comp. */
-#define SC_REJ_COMP_AC	0x00000010	/* reject adrs/ctrl comp. on input */
-#define SC_REJ_COMP_TCP	0x00000020	/* reject TCP (VJ) comp. on input */
-#define SC_CCP_OPEN	0x00000040	/* Look at CCP packets */
-#define SC_CCP_UP	0x00000080	/* May send/recv compressed packets */
-#define SC_ENABLE_IP	0x00000100	/* IP packets may be exchanged */
-#define SC_LOOP_TRAFFIC	0x00000200	/* send traffic to pppd */
-#define SC_MULTILINK	0x00000400	/* do multilink encapsulation */
-#define SC_MP_SHORTSEQ	0x00000800	/* use short MP sequence numbers */
-#define SC_COMP_RUN	0x00001000	/* compressor has been inited */
-#define SC_DECOMP_RUN	0x00002000	/* decompressor has been inited */
-#define SC_MP_XSHORTSEQ	0x00004000	/* transmit short MP seq numbers */
-#define SC_DEBUG	0x00010000	/* enable debug messages */
-#define SC_LOG_INPKT	0x00020000	/* log contents of good pkts recvd */
-#define SC_LOG_OUTPKT	0x00040000	/* log contents of pkts sent */
-#define SC_LOG_RAWIN	0x00080000	/* log all chars received */
-#define SC_LOG_FLUSH	0x00100000	/* log all chars flushed */
-#define	SC_SYNC		0x00200000	/* synchronous serial mode */
-#define	SC_MUST_COMP    0x00400000	/* no uncompressed packets may be sent or received */
-#define	SC_MASK		0x0f600fff	/* bits that user can change */
-
-/* state bits */
-#define SC_XMIT_BUSY	0x10000000	/* (used by isdn_ppp?) */
-#define SC_RCV_ODDP	0x08000000	/* have rcvd char with odd parity */
-#define SC_RCV_EVNP	0x04000000	/* have rcvd char with even parity */
-#define SC_RCV_B7_1	0x02000000	/* have rcvd char with bit 7 = 1 */
-#define SC_RCV_B7_0	0x01000000	/* have rcvd char with bit 7 = 0 */
-#define SC_DC_FERROR	0x00800000	/* fatal decomp error detected */
-#define SC_DC_ERROR	0x00400000	/* non-fatal decomp error detected */
-
-/* Used with PPPIOCGNPMODE/PPPIOCSNPMODE */
-struct npioctl {
-	int		protocol;	/* PPP protocol, e.g. PPP_IP */
-	enum NPmode	mode;
-};
-
-/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
-struct ppp_option_data {
-	__u8	__user *ptr;
-	__u32	length;
-	int	transmit;
-};
-
-/* For PPPIOCGL2TPSTATS */
-struct pppol2tp_ioc_stats {
-	__u16		tunnel_id;	/* redundant */
-	__u16		session_id;	/* if zero, get tunnel stats */
-	__u32		using_ipsec:1;	/* valid only for session_id == 0 */
-	__aligned_u64	tx_packets;
-	__aligned_u64	tx_bytes;
-	__aligned_u64	tx_errors;
-	__aligned_u64	rx_packets;
-	__aligned_u64	rx_bytes;
-	__aligned_u64	rx_seq_discards;
-	__aligned_u64	rx_oos_packets;
-	__aligned_u64	rx_errors;
-};
-
-/*
- * Ioctl definitions.
- */
-
-#define	PPPIOCGFLAGS	_IOR('t', 90, int)	/* get configuration flags */
-#define	PPPIOCSFLAGS	_IOW('t', 89, int)	/* set configuration flags */
-#define	PPPIOCGASYNCMAP	_IOR('t', 88, int)	/* get async map */
-#define	PPPIOCSASYNCMAP	_IOW('t', 87, int)	/* set async map */
-#define	PPPIOCGUNIT	_IOR('t', 86, int)	/* get ppp unit number */
-#define	PPPIOCGRASYNCMAP _IOR('t', 85, int)	/* get receive async map */
-#define	PPPIOCSRASYNCMAP _IOW('t', 84, int)	/* set receive async map */
-#define	PPPIOCGMRU	_IOR('t', 83, int)	/* get max receive unit */
-#define	PPPIOCSMRU	_IOW('t', 82, int)	/* set max receive unit */
-#define	PPPIOCSMAXCID	_IOW('t', 81, int)	/* set VJ max slot ID */
-#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
-#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
-#define PPPIOCXFERUNIT	_IO('t', 78)		/* transfer PPP unit */
-#define PPPIOCSCOMPRESS	_IOW('t', 77, struct ppp_option_data)
-#define PPPIOCGNPMODE	_IOWR('t', 76, struct npioctl) /* get NP mode */
-#define PPPIOCSNPMODE	_IOW('t', 75, struct npioctl)  /* set NP mode */
-#define PPPIOCSPASS	_IOW('t', 71, struct sock_fprog) /* set pass filter */
-#define PPPIOCSACTIVE	_IOW('t', 70, struct sock_fprog) /* set active filt */
-#define PPPIOCGDEBUG	_IOR('t', 65, int)	/* Read debug level */
-#define PPPIOCSDEBUG	_IOW('t', 64, int)	/* Set debug level */
-#define PPPIOCGIDLE	_IOR('t', 63, struct ppp_idle) /* get idle time */
-#define PPPIOCNEWUNIT	_IOWR('t', 62, int)	/* create new ppp unit */
-#define PPPIOCATTACH	_IOW('t', 61, int)	/* attach to ppp unit */
-#define PPPIOCDETACH	_IOW('t', 60, int)	/* detach from ppp unit/chan */
-#define PPPIOCSMRRU	_IOW('t', 59, int)	/* set multilink MRU */
-#define PPPIOCCONNECT	_IOW('t', 58, int)	/* connect channel to unit */
-#define PPPIOCDISCONN	_IO('t', 57)		/* disconnect channel */
-#define PPPIOCATTCHAN	_IOW('t', 56, int)	/* attach to ppp channel */
-#define PPPIOCGCHAN	_IOR('t', 55, int)	/* get ppp channel number */
-#define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats)
-
-#define SIOCGPPPSTATS   (SIOCDEVPRIVATE + 0)
-#define SIOCGPPPVER     (SIOCDEVPRIVATE + 1)	/* NEVER change this!! */
-#define SIOCGPPPCSTATS  (SIOCDEVPRIVATE + 2)
-
-#endif /* _PPP_IOCTL_H */
diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h
index ba416f67eb62..28aa0237c8c3 100644
--- a/include/linux/ppp_defs.h
+++ b/include/linux/ppp_defs.h
@@ -7,148 +7,11 @@
  *  modify it under the terms of the GNU General Public License
  *  version 2 as published by the Free Software Foundation.
  */
-#include <linux/types.h>
-
 #ifndef _PPP_DEFS_H_
 #define _PPP_DEFS_H_
 
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN	4	/* octets for standard ppp header */
-#define PPP_FCSLEN	2	/* octets for FCS */
-#define PPP_MRU		1500	/* default MRU = max length of info field */
-
-#define PPP_ADDRESS(p)	(((__u8 *)(p))[0])
-#define PPP_CONTROL(p)	(((__u8 *)(p))[1])
-#define PPP_PROTOCOL(p)	((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
-#define	PPP_UI		0x03	/* Unnumbered Information */
-#define	PPP_FLAG	0x7e	/* Flag Sequence */
-#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
-#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP		0x21	/* Internet Protocol */
-#define PPP_AT		0x29	/* AppleTalk Protocol */
-#define PPP_IPX		0x2b	/* IPX protocol */
-#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
-#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
-#define PPP_MP		0x3d	/* Multilink protocol */
-#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
-#define PPP_COMPFRAG	0xfb	/* fragment compressed below bundle */
-#define PPP_COMP	0xfd	/* compressed packet */
-#define PPP_MPLS_UC	0x0281	/* Multi Protocol Label Switching - Unicast */
-#define PPP_MPLS_MC	0x0283	/* Multi Protocol Label Switching - Multicast */
-#define PPP_IPCP	0x8021	/* IP Control Protocol */
-#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
-#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
-#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
-#define PPP_CCPFRAG	0x80fb	/* CCP at link level (below MP bundle) */
-#define PPP_CCP		0x80fd	/* Compression Control Protocol */
-#define PPP_MPLSCP	0x80fd	/* MPLS Control Protocol */
-#define PPP_LCP		0xc021	/* Link Control Protocol */
-#define PPP_PAP		0xc023	/* Password Authentication Protocol */
-#define PPP_LQR		0xc025	/* Link Quality Report protocol */
-#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP	0xc029	/* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-
-#define PPP_INITFCS	0xffff	/* Initial FCS value */
-#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
-
-#ifdef __KERNEL__
 #include <linux/crc-ccitt.h>
-#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c)
-#endif
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-
-typedef __u32		ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
-    NPMODE_PASS,		/* pass the packet through */
-    NPMODE_DROP,		/* silently drop the packet */
-    NPMODE_ERROR,		/* return an error */
-    NPMODE_QUEUE		/* save it up for later. */
-};
-
-/*
- * Statistics for LQRP and pppstats
- */
-struct pppstat	{
-    __u32	ppp_discards;	/* # frames discarded */
-
-    __u32	ppp_ibytes;	/* bytes received */
-    __u32	ppp_ioctects;	/* bytes received not in error */
-    __u32	ppp_ipackets;	/* packets received */
-    __u32	ppp_ierrors;	/* receive errors */
-    __u32	ppp_ilqrs;	/* # LQR frames received */
-
-    __u32	ppp_obytes;	/* raw bytes sent */
-    __u32	ppp_ooctects;	/* frame bytes sent */
-    __u32	ppp_opackets;	/* packets sent */
-    __u32	ppp_oerrors;	/* transmit errors */ 
-    __u32	ppp_olqrs;	/* # LQR frames sent */
-};
-
-struct vjstat {
-    __u32	vjs_packets;	/* outbound packets */
-    __u32	vjs_compressed;	/* outbound compressed packets */
-    __u32	vjs_searches;	/* searches for connection state */
-    __u32	vjs_misses;	/* times couldn't find conn. state */
-    __u32	vjs_uncompressedin; /* inbound uncompressed packets */
-    __u32	vjs_compressedin;   /* inbound compressed packets */
-    __u32	vjs_errorin;	/* inbound unknown type packets */
-    __u32	vjs_tossed;	/* inbound packets tossed because of error */
-};
-
-struct compstat {
-    __u32	unc_bytes;	/* total uncompressed bytes */
-    __u32	unc_packets;	/* total uncompressed packets */
-    __u32	comp_bytes;	/* compressed bytes */
-    __u32	comp_packets;	/* compressed packets */
-    __u32	inc_bytes;	/* incompressible bytes */
-    __u32	inc_packets;	/* incompressible packets */
-
-    /* the compression ratio is defined as in_count / bytes_out */
-    __u32       in_count;	/* Bytes received */
-    __u32       bytes_out;	/* Bytes transmitted */
-
-    double	ratio;		/* not computed in kernel. */
-};
-
-struct ppp_stats {
-    struct pppstat	p;	/* basic PPP statistics */
-    struct vjstat	vj;	/* VJ header compression statistics */
-};
-
-struct ppp_comp_stats {
-    struct compstat	c;	/* packet compression statistics */
-    struct compstat	d;	/* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
-    __kernel_time_t xmit_idle;	/* time since last NP packet sent */
-    __kernel_time_t recv_idle;	/* time since last NP packet received */
-};
+#include <uapi/linux/ppp_defs.h>
 
+#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c)
 #endif /* _PPP_DEFS_H_ */
diff --git a/include/linux/pps.h b/include/linux/pps.h
deleted file mode 100644
index a9bb1d93451a..000000000000
--- a/include/linux/pps.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * PPS API header
- *
- * Copyright (C) 2005-2009   Rodolfo Giometti <giometti@linux.it>
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#ifndef _PPS_H_
-#define _PPS_H_
-
-#include <linux/types.h>
-
-#define PPS_VERSION		"5.3.6"
-#define PPS_MAX_SOURCES		16		/* should be enough... */
-
-/* Implementation note: the logical states ``assert'' and ``clear''
- * are implemented in terms of the chip register, i.e. ``assert''
- * means the bit is set.  */
-
-/*
- * 3.2 New data structures
- */
-
-#define PPS_API_VERS_1		1
-#define PPS_API_VERS		PPS_API_VERS_1	/* we use API version 1 */
-#define PPS_MAX_NAME_LEN	32
-
-/* 32-bit vs. 64-bit compatibility.
- *
- * 0n i386, the alignment of a uint64_t is only 4 bytes, while on most other
- * architectures it's 8 bytes. On i386, there will be no padding between the
- * two consecutive 'struct pps_ktime' members of struct pps_kinfo and struct
- * pps_kparams. But on most platforms there will be padding to ensure correct
- * alignment.
- *
- * The simple fix is probably to add an explicit padding.
- *					 		[David Woodhouse]
- */
-struct pps_ktime {
-	__s64 sec;
-	__s32 nsec;
-	__u32 flags;
-};
-#define PPS_TIME_INVALID	(1<<0)	/* used to specify timeout==NULL */
-
-struct pps_kinfo {
-	__u32 assert_sequence;		/* seq. num. of assert event */
-	__u32 clear_sequence; 		/* seq. num. of clear event */
-	struct pps_ktime assert_tu;	/* time of assert event */
-	struct pps_ktime clear_tu;	/* time of clear event */
-	int current_mode;		/* current mode bits */
-};
-
-struct pps_kparams {
-	int api_version;		/* API version # */
-	int mode;			/* mode bits */
-	struct pps_ktime assert_off_tu;	/* offset compensation for assert */
-	struct pps_ktime clear_off_tu;	/* offset compensation for clear */
-};
-
-/*
- * 3.3 Mode bit definitions
- */
-
-/* Device/implementation parameters */
-#define PPS_CAPTUREASSERT	0x01	/* capture assert events */
-#define PPS_CAPTURECLEAR	0x02	/* capture clear events */
-#define PPS_CAPTUREBOTH		0x03	/* capture assert and clear events */
-
-#define PPS_OFFSETASSERT	0x10	/* apply compensation for assert ev. */
-#define PPS_OFFSETCLEAR		0x20	/* apply compensation for clear ev. */
-
-#define PPS_CANWAIT		0x100	/* can we wait for an event? */
-#define PPS_CANPOLL		0x200	/* bit reserved for future use */
-
-/* Kernel actions */
-#define PPS_ECHOASSERT		0x40	/* feed back assert event to output */
-#define PPS_ECHOCLEAR		0x80	/* feed back clear event to output */
-
-/* Timestamp formats */
-#define PPS_TSFMT_TSPEC		0x1000	/* select timespec format */
-#define PPS_TSFMT_NTPFP		0x2000	/* select NTP format */
-
-/*
- * 3.4.4 New functions: disciplining the kernel timebase
- */
-
-/* Kernel consumers */
-#define PPS_KC_HARDPPS		0	/* hardpps() (or equivalent) */
-#define PPS_KC_HARDPPS_PLL	1	/* hardpps() constrained to
-					   use a phase-locked loop */
-#define PPS_KC_HARDPPS_FLL	2	/* hardpps() constrained to
-					   use a frequency-locked loop */
-/*
- * Here begins the implementation-specific part!
- */
-
-struct pps_fdata {
-	struct pps_kinfo info;
-	struct pps_ktime timeout;
-};
-
-struct pps_bind_args {
-	int tsformat;	/* format of time stamps */
-	int edge;	/* selected event type */
-	int consumer;	/* selected kernel consumer */
-};
-
-#include <linux/ioctl.h>
-
-#define PPS_GETPARAMS		_IOR('p', 0xa1, struct pps_kparams *)
-#define PPS_SETPARAMS		_IOW('p', 0xa2, struct pps_kparams *)
-#define PPS_GETCAP		_IOR('p', 0xa3, int *)
-#define PPS_FETCH		_IOWR('p', 0xa4, struct pps_fdata *)
-#define PPS_KC_BIND		_IOW('p', 0xa5, struct pps_bind_args *)
-
-#endif /* _PPS_H_ */
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
deleted file mode 100644
index 289760f424aa..000000000000
--- a/include/linux/prctl.h
+++ /dev/null
@@ -1,152 +0,0 @@
-#ifndef _LINUX_PRCTL_H
-#define _LINUX_PRCTL_H
-
-/* Values to pass as first argument to prctl() */
-
-#define PR_SET_PDEATHSIG  1  /* Second arg is a signal */
-#define PR_GET_PDEATHSIG  2  /* Second arg is a ptr to return the signal */
-
-/* Get/set current->mm->dumpable */
-#define PR_GET_DUMPABLE   3
-#define PR_SET_DUMPABLE   4
-
-/* Get/set unaligned access control bits (if meaningful) */
-#define PR_GET_UNALIGN	  5
-#define PR_SET_UNALIGN	  6
-# define PR_UNALIGN_NOPRINT	1	/* silently fix up unaligned user accesses */
-# define PR_UNALIGN_SIGBUS	2	/* generate SIGBUS on unaligned user access */
-
-/* Get/set whether or not to drop capabilities on setuid() away from
- * uid 0 (as per security/commoncap.c) */
-#define PR_GET_KEEPCAPS   7
-#define PR_SET_KEEPCAPS   8
-
-/* Get/set floating-point emulation control bits (if meaningful) */
-#define PR_GET_FPEMU  9
-#define PR_SET_FPEMU 10
-# define PR_FPEMU_NOPRINT	1	/* silently emulate fp operations accesses */
-# define PR_FPEMU_SIGFPE	2	/* don't emulate fp operations, send SIGFPE instead */
-
-/* Get/set floating-point exception mode (if meaningful) */
-#define PR_GET_FPEXC	11
-#define PR_SET_FPEXC	12
-# define PR_FP_EXC_SW_ENABLE	0x80	/* Use FPEXC for FP exception enables */
-# define PR_FP_EXC_DIV		0x010000	/* floating point divide by zero */
-# define PR_FP_EXC_OVF		0x020000	/* floating point overflow */
-# define PR_FP_EXC_UND		0x040000	/* floating point underflow */
-# define PR_FP_EXC_RES		0x080000	/* floating point inexact result */
-# define PR_FP_EXC_INV		0x100000	/* floating point invalid operation */
-# define PR_FP_EXC_DISABLED	0	/* FP exceptions disabled */
-# define PR_FP_EXC_NONRECOV	1	/* async non-recoverable exc. mode */
-# define PR_FP_EXC_ASYNC	2	/* async recoverable exception mode */
-# define PR_FP_EXC_PRECISE	3	/* precise exception mode */
-
-/* Get/set whether we use statistical process timing or accurate timestamp
- * based process timing */
-#define PR_GET_TIMING   13
-#define PR_SET_TIMING   14
-# define PR_TIMING_STATISTICAL  0       /* Normal, traditional,
-                                                   statistical process timing */
-# define PR_TIMING_TIMESTAMP    1       /* Accurate timestamp based
-                                                   process timing */
-
-#define PR_SET_NAME    15		/* Set process name */
-#define PR_GET_NAME    16		/* Get process name */
-
-/* Get/set process endian */
-#define PR_GET_ENDIAN	19
-#define PR_SET_ENDIAN	20
-# define PR_ENDIAN_BIG		0
-# define PR_ENDIAN_LITTLE	1	/* True little endian mode */
-# define PR_ENDIAN_PPC_LITTLE	2	/* "PowerPC" pseudo little endian */
-
-/* Get/set process seccomp mode */
-#define PR_GET_SECCOMP	21
-#define PR_SET_SECCOMP	22
-
-/* Get/set the capability bounding set (as per security/commoncap.c) */
-#define PR_CAPBSET_READ 23
-#define PR_CAPBSET_DROP 24
-
-/* Get/set the process' ability to use the timestamp counter instruction */
-#define PR_GET_TSC 25
-#define PR_SET_TSC 26
-# define PR_TSC_ENABLE		1	/* allow the use of the timestamp counter */
-# define PR_TSC_SIGSEGV		2	/* throw a SIGSEGV instead of reading the TSC */
-
-/* Get/set securebits (as per security/commoncap.c) */
-#define PR_GET_SECUREBITS 27
-#define PR_SET_SECUREBITS 28
-
-/*
- * Get/set the timerslack as used by poll/select/nanosleep
- * A value of 0 means "use default"
- */
-#define PR_SET_TIMERSLACK 29
-#define PR_GET_TIMERSLACK 30
-
-#define PR_TASK_PERF_EVENTS_DISABLE		31
-#define PR_TASK_PERF_EVENTS_ENABLE		32
-
-/*
- * Set early/late kill mode for hwpoison memory corruption.
- * This influences when the process gets killed on a memory corruption.
- */
-#define PR_MCE_KILL	33
-# define PR_MCE_KILL_CLEAR   0
-# define PR_MCE_KILL_SET     1
-
-# define PR_MCE_KILL_LATE    0
-# define PR_MCE_KILL_EARLY   1
-# define PR_MCE_KILL_DEFAULT 2
-
-#define PR_MCE_KILL_GET 34
-
-/*
- * Tune up process memory map specifics.
- */
-#define PR_SET_MM		35
-# define PR_SET_MM_START_CODE		1
-# define PR_SET_MM_END_CODE		2
-# define PR_SET_MM_START_DATA		3
-# define PR_SET_MM_END_DATA		4
-# define PR_SET_MM_START_STACK		5
-# define PR_SET_MM_START_BRK		6
-# define PR_SET_MM_BRK			7
-# define PR_SET_MM_ARG_START		8
-# define PR_SET_MM_ARG_END		9
-# define PR_SET_MM_ENV_START		10
-# define PR_SET_MM_ENV_END		11
-# define PR_SET_MM_AUXV			12
-# define PR_SET_MM_EXE_FILE		13
-
-/*
- * Set specific pid that is allowed to ptrace the current task.
- * A value of 0 mean "no process".
- */
-#define PR_SET_PTRACER 0x59616d61
-# define PR_SET_PTRACER_ANY ((unsigned long)-1)
-
-#define PR_SET_CHILD_SUBREAPER	36
-#define PR_GET_CHILD_SUBREAPER	37
-
-/*
- * If no_new_privs is set, then operations that grant new privileges (i.e.
- * execve) will either fail or not grant them.  This affects suid/sgid,
- * file capabilities, and LSMs.
- *
- * Operations that merely manipulate or drop existing privileges (setresuid,
- * capset, etc.) will still work.  Drop those privileges if you want them gone.
- *
- * Changing LSM security domain is considered a new privilege.  So, for example,
- * asking selinux for a specific new context (e.g. with runcon) will result
- * in execve returning -EPERM.
- *
- * See Documentation/prctl/no_new_privs.txt for more details.
- */
-#define PR_SET_NO_NEW_PRIVS	38
-#define PR_GET_NO_NEW_PRIVS	39
-
-#define PR_GET_TID_ADDRESS	40
-
-#endif /* _LINUX_PRCTL_H */
diff --git a/include/linux/ptp_clock.h b/include/linux/ptp_clock.h
deleted file mode 100644
index 94e981f810a2..000000000000
--- a/include/linux/ptp_clock.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * PTP 1588 clock support - user space interface
- *
- * Copyright (C) 2010 OMICRON electronics GmbH
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _PTP_CLOCK_H_
-#define _PTP_CLOCK_H_
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/* PTP_xxx bits, for the flags field within the request structures. */
-#define PTP_ENABLE_FEATURE (1<<0)
-#define PTP_RISING_EDGE    (1<<1)
-#define PTP_FALLING_EDGE   (1<<2)
-
-/*
- * struct ptp_clock_time - represents a time value
- *
- * The sign of the seconds field applies to the whole value. The
- * nanoseconds field is always unsigned. The reserved field is
- * included for sub-nanosecond resolution, should the demand for
- * this ever appear.
- *
- */
-struct ptp_clock_time {
-	__s64 sec;  /* seconds */
-	__u32 nsec; /* nanoseconds */
-	__u32 reserved;
-};
-
-struct ptp_clock_caps {
-	int max_adj;   /* Maximum frequency adjustment in parts per billon. */
-	int n_alarm;   /* Number of programmable alarms. */
-	int n_ext_ts;  /* Number of external time stamp channels. */
-	int n_per_out; /* Number of programmable periodic signals. */
-	int pps;       /* Whether the clock supports a PPS callback. */
-	int rsv[15];   /* Reserved for future use. */
-};
-
-struct ptp_extts_request {
-	unsigned int index;  /* Which channel to configure. */
-	unsigned int flags;  /* Bit field for PTP_xxx flags. */
-	unsigned int rsv[2]; /* Reserved for future use. */
-};
-
-struct ptp_perout_request {
-	struct ptp_clock_time start;  /* Absolute start time. */
-	struct ptp_clock_time period; /* Desired period, zero means disable. */
-	unsigned int index;           /* Which channel to configure. */
-	unsigned int flags;           /* Reserved for future use. */
-	unsigned int rsv[4];          /* Reserved for future use. */
-};
-
-#define PTP_CLK_MAGIC '='
-
-#define PTP_CLOCK_GETCAPS  _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps)
-#define PTP_EXTTS_REQUEST  _IOW(PTP_CLK_MAGIC, 2, struct ptp_extts_request)
-#define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request)
-#define PTP_ENABLE_PPS     _IOW(PTP_CLK_MAGIC, 4, int)
-
-struct ptp_extts_event {
-	struct ptp_clock_time t; /* Time event occured. */
-	unsigned int index;      /* Which channel produced the event. */
-	unsigned int flags;      /* Reserved for future use. */
-	unsigned int rsv[2];     /* Reserved for future use. */
-};
-
-#endif
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 1d24ffad59c5..e0ff4689d35a 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -1,83 +1,13 @@
 #ifndef _LINUX_PTRACE_H
 #define _LINUX_PTRACE_H
-/* ptrace.h */
-/* structs and defines to help the user use the ptrace system call. */
 
-/* has the defines to get at the registers. */
-
-#define PTRACE_TRACEME		   0
-#define PTRACE_PEEKTEXT		   1
-#define PTRACE_PEEKDATA		   2
-#define PTRACE_PEEKUSR		   3
-#define PTRACE_POKETEXT		   4
-#define PTRACE_POKEDATA		   5
-#define PTRACE_POKEUSR		   6
-#define PTRACE_CONT		   7
-#define PTRACE_KILL		   8
-#define PTRACE_SINGLESTEP	   9
-
-#define PTRACE_ATTACH		  16
-#define PTRACE_DETACH		  17
-
-#define PTRACE_SYSCALL		  24
-
-/* 0x4200-0x4300 are reserved for architecture-independent additions.  */
-#define PTRACE_SETOPTIONS	0x4200
-#define PTRACE_GETEVENTMSG	0x4201
-#define PTRACE_GETSIGINFO	0x4202
-#define PTRACE_SETSIGINFO	0x4203
+#include <linux/compiler.h>		/* For unlikely.  */
+#include <linux/sched.h>		/* For struct task_struct.  */
+#include <linux/err.h>			/* for IS_ERR_VALUE */
+#include <linux/bug.h>			/* For BUG_ON.  */
+#include <uapi/linux/ptrace.h>
 
 /*
- * Generic ptrace interface that exports the architecture specific regsets
- * using the corresponding NT_* types (which are also used in the core dump).
- * Please note that the NT_PRSTATUS note type in a core dump contains a full
- * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
- * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
- * other user_regset flavors, the user_regset layout and the ELF core dump note
- * payload are exactly the same layout.
- *
- * This interface usage is as follows:
- *	struct iovec iov = { buf, len};
- *
- *	ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
- *
- * On the successful completion, iov.len will be updated by the kernel,
- * specifying how much the kernel has written/read to/from the user's iov.buf.
- */
-#define PTRACE_GETREGSET	0x4204
-#define PTRACE_SETREGSET	0x4205
-
-#define PTRACE_SEIZE		0x4206
-#define PTRACE_INTERRUPT	0x4207
-#define PTRACE_LISTEN		0x4208
-
-/* Wait extended result codes for the above trace options.  */
-#define PTRACE_EVENT_FORK	1
-#define PTRACE_EVENT_VFORK	2
-#define PTRACE_EVENT_CLONE	3
-#define PTRACE_EVENT_EXEC	4
-#define PTRACE_EVENT_VFORK_DONE	5
-#define PTRACE_EVENT_EXIT	6
-#define PTRACE_EVENT_SECCOMP	7
-/* Extended result codes which enabled by means other than options.  */
-#define PTRACE_EVENT_STOP	128
-
-/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
-#define PTRACE_O_TRACESYSGOOD	1
-#define PTRACE_O_TRACEFORK	(1 << PTRACE_EVENT_FORK)
-#define PTRACE_O_TRACEVFORK	(1 << PTRACE_EVENT_VFORK)
-#define PTRACE_O_TRACECLONE	(1 << PTRACE_EVENT_CLONE)
-#define PTRACE_O_TRACEEXEC	(1 << PTRACE_EVENT_EXEC)
-#define PTRACE_O_TRACEVFORKDONE	(1 << PTRACE_EVENT_VFORK_DONE)
-#define PTRACE_O_TRACEEXIT	(1 << PTRACE_EVENT_EXIT)
-#define PTRACE_O_TRACESECCOMP	(1 << PTRACE_EVENT_SECCOMP)
-
-#define PTRACE_O_MASK		0x000000ff
-
-#include <asm/ptrace.h>
-
-#ifdef __KERNEL__
-/*
  * Ptrace flags
  *
  * The owner ship rules for task->ptrace which holds the ptrace
@@ -108,12 +38,6 @@
 #define PT_BLOCKSTEP_BIT	30
 #define PT_BLOCKSTEP		(1<<PT_BLOCKSTEP_BIT)
 
-#include <linux/compiler.h>		/* For unlikely.  */
-#include <linux/sched.h>		/* For struct task_struct.  */
-#include <linux/err.h>			/* for IS_ERR_VALUE */
-#include <linux/bug.h>			/* For BUG_ON.  */
-
-
 extern long arch_ptrace(struct task_struct *child, long request,
 			unsigned long addr, unsigned long data);
 extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
@@ -416,6 +340,4 @@ extern void ptrace_put_breakpoints(struct task_struct *tsk);
 static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
-#endif /* __KERNEL */
-
 #endif
diff --git a/include/linux/qnx4_fs.h b/include/linux/qnx4_fs.h
deleted file mode 100644
index 8b9aee1a9ce3..000000000000
--- a/include/linux/qnx4_fs.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *  Name                         : qnx4_fs.h
- *  Author                       : Richard Frowijn
- *  Function                     : qnx4 global filesystem definitions
- *  History                      : 23-03-1998 created
- */
-#ifndef _LINUX_QNX4_FS_H
-#define _LINUX_QNX4_FS_H
-
-#include <linux/types.h>
-#include <linux/qnxtypes.h>
-#include <linux/magic.h>
-
-#define QNX4_ROOT_INO 1
-
-#define QNX4_MAX_XTNTS_PER_XBLK	60
-/* for di_status */
-#define QNX4_FILE_USED          0x01
-#define QNX4_FILE_MODIFIED      0x02
-#define QNX4_FILE_BUSY          0x04
-#define QNX4_FILE_LINK          0x08
-#define QNX4_FILE_INODE         0x10
-#define QNX4_FILE_FSYSCLEAN     0x20
-
-#define QNX4_I_MAP_SLOTS	8
-#define QNX4_Z_MAP_SLOTS	64
-#define QNX4_VALID_FS		0x0001	/* Clean fs. */
-#define QNX4_ERROR_FS		0x0002	/* fs has errors. */
-#define QNX4_BLOCK_SIZE         0x200	/* blocksize of 512 bytes */
-#define QNX4_BLOCK_SIZE_BITS    9	/* blocksize shift */
-#define QNX4_DIR_ENTRY_SIZE     0x040	/* dir entry size of 64 bytes */
-#define QNX4_DIR_ENTRY_SIZE_BITS 6	/* dir entry size shift */
-#define QNX4_XBLK_ENTRY_SIZE    0x200	/* xblk entry size */
-#define QNX4_INODES_PER_BLOCK   0x08	/* 512 / 64 */
-
-/* for filenames */
-#define QNX4_SHORT_NAME_MAX	16
-#define QNX4_NAME_MAX		48
-
-/*
- * This is the original qnx4 inode layout on disk.
- */
-struct qnx4_inode_entry {
-	char		di_fname[QNX4_SHORT_NAME_MAX];
-	qnx4_off_t	di_size;
-	qnx4_xtnt_t	di_first_xtnt;
-	__le32		di_xblk;
-	__le32		di_ftime;
-	__le32		di_mtime;
-	__le32		di_atime;
-	__le32		di_ctime;
-	qnx4_nxtnt_t	di_num_xtnts;
-	qnx4_mode_t	di_mode;
-	qnx4_muid_t	di_uid;
-	qnx4_mgid_t	di_gid;
-	qnx4_nlink_t	di_nlink;
-	__u8		di_zero[4];
-	qnx4_ftype_t	di_type;
-	__u8		di_status;
-};
-
-struct qnx4_link_info {
-	char		dl_fname[QNX4_NAME_MAX];
-	__le32		dl_inode_blk;
-	__u8		dl_inode_ndx;
-	__u8		dl_spare[10];
-	__u8		dl_status;
-};
-
-struct qnx4_xblk {
-	__le32		xblk_next_xblk;
-	__le32		xblk_prev_xblk;
-	__u8		xblk_num_xtnts;
-	__u8		xblk_spare[3];
-	__le32		xblk_num_blocks;
-	qnx4_xtnt_t	xblk_xtnts[QNX4_MAX_XTNTS_PER_XBLK];
-	char		xblk_signature[8];
-	qnx4_xtnt_t	xblk_first_xtnt;
-};
-
-struct qnx4_super_block {
-	struct qnx4_inode_entry RootDir;
-	struct qnx4_inode_entry Inode;
-	struct qnx4_inode_entry Boot;
-	struct qnx4_inode_entry AltBoot;
-};
-
-#endif
diff --git a/include/linux/qnxtypes.h b/include/linux/qnxtypes.h
deleted file mode 100644
index bebbe5cc4fb8..000000000000
--- a/include/linux/qnxtypes.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  Name                         : qnxtypes.h
- *  Author                       : Richard Frowijn
- *  Function                     : standard qnx types
- *  History                      : 22-03-1998 created
- *
- */
-
-#ifndef _QNX4TYPES_H
-#define _QNX4TYPES_H
-
-#include <linux/types.h>
-
-typedef __le16 qnx4_nxtnt_t;
-typedef __u8  qnx4_ftype_t;
-
-typedef struct {
-	__le32 xtnt_blk;
-	__le32 xtnt_size;
-} qnx4_xtnt_t;
-
-typedef __le16 qnx4_mode_t;
-typedef __le16 qnx4_muid_t;
-typedef __le16 qnx4_mgid_t;
-typedef __le32 qnx4_off_t;
-typedef __le16 qnx4_nlink_t;
-
-#endif
diff --git a/include/linux/quota.h b/include/linux/quota.h
index dcd5721e626d..58fdef125252 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -29,146 +29,9 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  */
-
 #ifndef _LINUX_QUOTA_
 #define _LINUX_QUOTA_
 
-#include <linux/errno.h>
-#include <linux/types.h>
-
-#define __DQUOT_VERSION__	"dquot_6.5.2"
-
-#define MAXQUOTAS 2
-#define USRQUOTA  0		/* element used for user quotas */
-#define GRPQUOTA  1		/* element used for group quotas */
-
-/*
- * Definitions for the default names of the quotas files.
- */
-#define INITQFNAMES { \
-	"user",    /* USRQUOTA */ \
-	"group",   /* GRPQUOTA */ \
-	"undefined", \
-};
-
-/*
- * Command definitions for the 'quotactl' system call.
- * The commands are broken into a main command defined below
- * and a subcommand that is used to convey the type of
- * quota that is being manipulated (see above).
- */
-#define SUBCMDMASK  0x00ff
-#define SUBCMDSHIFT 8
-#define QCMD(cmd, type)  (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
-
-#define Q_SYNC     0x800001	/* sync disk copy of a filesystems quotas */
-#define Q_QUOTAON  0x800002	/* turn quotas on */
-#define Q_QUOTAOFF 0x800003	/* turn quotas off */
-#define Q_GETFMT   0x800004	/* get quota format used on given filesystem */
-#define Q_GETINFO  0x800005	/* get information about quota files */
-#define Q_SETINFO  0x800006	/* set information about quota files */
-#define Q_GETQUOTA 0x800007	/* get user quota structure */
-#define Q_SETQUOTA 0x800008	/* set user quota structure */
-
-/* Quota format type IDs */
-#define	QFMT_VFS_OLD 1
-#define	QFMT_VFS_V0 2
-#define QFMT_OCFS2 3
-#define	QFMT_VFS_V1 4
-
-/* Size of block in which space limits are passed through the quota
- * interface */
-#define QIF_DQBLKSIZE_BITS 10
-#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS)
-
-/*
- * Quota structure used for communication with userspace via quotactl
- * Following flags are used to specify which fields are valid
- */
-enum {
-	QIF_BLIMITS_B = 0,
-	QIF_SPACE_B,
-	QIF_ILIMITS_B,
-	QIF_INODES_B,
-	QIF_BTIME_B,
-	QIF_ITIME_B,
-};
-
-#define QIF_BLIMITS	(1 << QIF_BLIMITS_B)
-#define QIF_SPACE	(1 << QIF_SPACE_B)
-#define QIF_ILIMITS	(1 << QIF_ILIMITS_B)
-#define QIF_INODES	(1 << QIF_INODES_B)
-#define QIF_BTIME	(1 << QIF_BTIME_B)
-#define QIF_ITIME	(1 << QIF_ITIME_B)
-#define QIF_LIMITS	(QIF_BLIMITS | QIF_ILIMITS)
-#define QIF_USAGE	(QIF_SPACE | QIF_INODES)
-#define QIF_TIMES	(QIF_BTIME | QIF_ITIME)
-#define QIF_ALL		(QIF_LIMITS | QIF_USAGE | QIF_TIMES)
-
-struct if_dqblk {
-	__u64 dqb_bhardlimit;
-	__u64 dqb_bsoftlimit;
-	__u64 dqb_curspace;
-	__u64 dqb_ihardlimit;
-	__u64 dqb_isoftlimit;
-	__u64 dqb_curinodes;
-	__u64 dqb_btime;
-	__u64 dqb_itime;
-	__u32 dqb_valid;
-};
-
-/*
- * Structure used for setting quota information about file via quotactl
- * Following flags are used to specify which fields are valid
- */
-#define IIF_BGRACE	1
-#define IIF_IGRACE	2
-#define IIF_FLAGS	4
-#define IIF_ALL		(IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
-
-struct if_dqinfo {
-	__u64 dqi_bgrace;
-	__u64 dqi_igrace;
-	__u32 dqi_flags;
-	__u32 dqi_valid;
-};
-
-/*
- * Definitions for quota netlink interface
- */
-#define QUOTA_NL_NOWARN 0
-#define QUOTA_NL_IHARDWARN 1		/* Inode hardlimit reached */
-#define QUOTA_NL_ISOFTLONGWARN 2 	/* Inode grace time expired */
-#define QUOTA_NL_ISOFTWARN 3		/* Inode softlimit reached */
-#define QUOTA_NL_BHARDWARN 4		/* Block hardlimit reached */
-#define QUOTA_NL_BSOFTLONGWARN 5	/* Block grace time expired */
-#define QUOTA_NL_BSOFTWARN 6		/* Block softlimit reached */
-#define QUOTA_NL_IHARDBELOW 7		/* Usage got below inode hardlimit */
-#define QUOTA_NL_ISOFTBELOW 8		/* Usage got below inode softlimit */
-#define QUOTA_NL_BHARDBELOW 9		/* Usage got below block hardlimit */
-#define QUOTA_NL_BSOFTBELOW 10		/* Usage got below block softlimit */
-
-enum {
-	QUOTA_NL_C_UNSPEC,
-	QUOTA_NL_C_WARNING,
-	__QUOTA_NL_C_MAX,
-};
-#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1)
-
-enum {
-	QUOTA_NL_A_UNSPEC,
-	QUOTA_NL_A_QTYPE,
-	QUOTA_NL_A_EXCESS_ID,
-	QUOTA_NL_A_WARNING,
-	QUOTA_NL_A_DEV_MAJOR,
-	QUOTA_NL_A_DEV_MINOR,
-	QUOTA_NL_A_CAUSED_ID,
-	__QUOTA_NL_A_MAX,
-};
-#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1)
-
-
-#ifdef __KERNEL__
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/rwsem.h>
@@ -183,6 +46,7 @@ enum {
 #include <linux/atomic.h>
 #include <linux/uidgid.h>
 #include <linux/projid.h>
+#include <uapi/linux/quota.h>
 
 #undef USRQUOTA
 #undef GRPQUOTA
@@ -543,5 +407,4 @@ struct quota_module_name {
 	{QFMT_VFS_V0, "quota_v2"},\
 	{0, NULL}}
 
-#endif /* __KERNEL__ */
 #endif /* _QUOTA_ */
diff --git a/include/linux/radeonfb.h b/include/linux/radeonfb.h
deleted file mode 100644
index 8c4bbdecc44f..000000000000
--- a/include/linux/radeonfb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __LINUX_RADEONFB_H__
-#define __LINUX_RADEONFB_H__
-
-#include <asm/ioctl.h>
-#include <linux/types.h>
-
-#define ATY_RADEON_LCD_ON	0x00000001
-#define ATY_RADEON_CRT_ON	0x00000002
-
-
-#define FBIO_RADEON_GET_MIRROR	_IOR('@', 3, size_t)
-#define FBIO_RADEON_SET_MIRROR	_IOW('@', 4, size_t)
-
-#endif
-
diff --git a/include/linux/random.h b/include/linux/random.h
index ac621ce886ca..6330ed47b38b 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -3,50 +3,11 @@
  *
  * Include file for the random number generator.
  */
-
 #ifndef _LINUX_RANDOM_H
 #define _LINUX_RANDOM_H
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/irqnr.h>
-
-/* ioctl()'s for the random number generator */
-
-/* Get the entropy count. */
-#define RNDGETENTCNT	_IOR( 'R', 0x00, int )
-
-/* Add to (or subtract from) the entropy count.  (Superuser only.) */
-#define RNDADDTOENTCNT	_IOW( 'R', 0x01, int )
-
-/* Get the contents of the entropy pool.  (Superuser only.) */
-#define RNDGETPOOL	_IOR( 'R', 0x02, int [2] )
-
-/* 
- * Write bytes into the entropy pool and add to the entropy count.
- * (Superuser only.)
- */
-#define RNDADDENTROPY	_IOW( 'R', 0x03, int [2] )
+#include <uapi/linux/random.h>
 
-/* Clear entropy count to 0.  (Superuser only.) */
-#define RNDZAPENTCNT	_IO( 'R', 0x04 )
-
-/* Clear the entropy pool and associated counters.  (Superuser only.) */
-#define RNDCLEARPOOL	_IO( 'R', 0x06 )
-
-struct rand_pool_info {
-	int	entropy_count;
-	int	buf_size;
-	__u32	buf[0];
-};
-
-struct rnd_state {
-	__u32 s1, s2, s3;
-};
-
-/* Exported functions */
-
-#ifdef __KERNEL__
 
 extern void add_device_randomness(const void *, unsigned int);
 extern void add_input_randomness(unsigned int type, unsigned int code,
@@ -104,6 +65,4 @@ static inline int arch_get_random_int(unsigned int *v)
 }
 #endif
 
-#endif /* __KERNEL___ */
-
 #endif /* _LINUX_RANDOM_H */
diff --git a/include/linux/raw.h b/include/linux/raw.h
deleted file mode 100644
index 62d543e70603..000000000000
--- a/include/linux/raw.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __LINUX_RAW_H
-#define __LINUX_RAW_H
-
-#include <linux/types.h>
-
-#define RAW_SETBIND	_IO( 0xac, 0 )
-#define RAW_GETBIND	_IO( 0xac, 1 )
-
-struct raw_config_request 
-{
-	int	raw_minor;
-	__u64	block_major;
-	__u64	block_minor;
-};
-
-#define MAX_RAW_MINORS CONFIG_MAX_RAW_DEVS
-
-#endif /* __LINUX_RAW_H */
diff --git a/include/linux/rds.h b/include/linux/rds.h
deleted file mode 100644
index 91950950aa59..000000000000
--- a/include/linux/rds.h
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * Copyright (c) 2008 Oracle.  All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- */
-
-#ifndef _LINUX_RDS_H
-#define _LINUX_RDS_H
-
-#include <linux/types.h>
-
-#define RDS_IB_ABI_VERSION		0x301
-
-/*
- * setsockopt/getsockopt for SOL_RDS
- */
-#define RDS_CANCEL_SENT_TO      	1
-#define RDS_GET_MR			2
-#define RDS_FREE_MR			3
-/* deprecated: RDS_BARRIER 4 */
-#define RDS_RECVERR			5
-#define RDS_CONG_MONITOR		6
-#define RDS_GET_MR_FOR_DEST		7
-
-/*
- * Control message types for SOL_RDS.
- *
- * CMSG_RDMA_ARGS (sendmsg)
- *	Request a RDMA transfer to/from the specified
- *	memory ranges.
- *	The cmsg_data is a struct rds_rdma_args.
- * RDS_CMSG_RDMA_DEST (recvmsg, sendmsg)
- *	Kernel informs application about intended
- *	source/destination of a RDMA transfer
- * RDS_CMSG_RDMA_MAP (sendmsg)
- *	Application asks kernel to map the given
- *	memory range into a IB MR, and send the
- *	R_Key along in an RDS extension header.
- *	The cmsg_data is a struct rds_get_mr_args,
- *	the same as for the GET_MR setsockopt.
- * RDS_CMSG_RDMA_STATUS (recvmsg)
- *	Returns the status of a completed RDMA operation.
- */
-#define RDS_CMSG_RDMA_ARGS		1
-#define RDS_CMSG_RDMA_DEST		2
-#define RDS_CMSG_RDMA_MAP		3
-#define RDS_CMSG_RDMA_STATUS		4
-#define RDS_CMSG_CONG_UPDATE		5
-#define RDS_CMSG_ATOMIC_FADD		6
-#define RDS_CMSG_ATOMIC_CSWP		7
-#define RDS_CMSG_MASKED_ATOMIC_FADD	8
-#define RDS_CMSG_MASKED_ATOMIC_CSWP	9
-
-#define RDS_INFO_FIRST			10000
-#define RDS_INFO_COUNTERS		10000
-#define RDS_INFO_CONNECTIONS		10001
-/* 10002 aka RDS_INFO_FLOWS is deprecated */
-#define RDS_INFO_SEND_MESSAGES		10003
-#define RDS_INFO_RETRANS_MESSAGES       10004
-#define RDS_INFO_RECV_MESSAGES          10005
-#define RDS_INFO_SOCKETS                10006
-#define RDS_INFO_TCP_SOCKETS            10007
-#define RDS_INFO_IB_CONNECTIONS		10008
-#define RDS_INFO_CONNECTION_STATS	10009
-#define RDS_INFO_IWARP_CONNECTIONS	10010
-#define RDS_INFO_LAST			10010
-
-struct rds_info_counter {
-	uint8_t	name[32];
-	uint64_t	value;
-} __attribute__((packed));
-
-#define RDS_INFO_CONNECTION_FLAG_SENDING	0x01
-#define RDS_INFO_CONNECTION_FLAG_CONNECTING	0x02
-#define RDS_INFO_CONNECTION_FLAG_CONNECTED	0x04
-
-#define TRANSNAMSIZ	16
-
-struct rds_info_connection {
-	uint64_t	next_tx_seq;
-	uint64_t	next_rx_seq;
-	__be32		laddr;
-	__be32		faddr;
-	uint8_t	transport[TRANSNAMSIZ];		/* null term ascii */
-	uint8_t	flags;
-} __attribute__((packed));
-
-#define RDS_INFO_MESSAGE_FLAG_ACK               0x01
-#define RDS_INFO_MESSAGE_FLAG_FAST_ACK          0x02
-
-struct rds_info_message {
-	uint64_t	seq;
-	uint32_t	len;
-	__be32		laddr;
-	__be32		faddr;
-	__be16		lport;
-	__be16		fport;
-	uint8_t	flags;
-} __attribute__((packed));
-
-struct rds_info_socket {
-	uint32_t	sndbuf;
-	__be32		bound_addr;
-	__be32		connected_addr;
-	__be16		bound_port;
-	__be16		connected_port;
-	uint32_t	rcvbuf;
-	uint64_t	inum;
-} __attribute__((packed));
-
-struct rds_info_tcp_socket {
-	__be32          local_addr;
-	__be16          local_port;
-	__be32          peer_addr;
-	__be16          peer_port;
-	uint64_t       hdr_rem;
-	uint64_t       data_rem;
-	uint32_t       last_sent_nxt;
-	uint32_t       last_expected_una;
-	uint32_t       last_seen_una;
-} __attribute__((packed));
-
-#define RDS_IB_GID_LEN	16
-struct rds_info_rdma_connection {
-	__be32		src_addr;
-	__be32		dst_addr;
-	uint8_t		src_gid[RDS_IB_GID_LEN];
-	uint8_t		dst_gid[RDS_IB_GID_LEN];
-
-	uint32_t	max_send_wr;
-	uint32_t	max_recv_wr;
-	uint32_t	max_send_sge;
-	uint32_t	rdma_mr_max;
-	uint32_t	rdma_mr_size;
-};
-
-/*
- * Congestion monitoring.
- * Congestion control in RDS happens at the host connection
- * level by exchanging a bitmap marking congested ports.
- * By default, a process sleeping in poll() is always woken
- * up when the congestion map is updated.
- * With explicit monitoring, an application can have more
- * fine-grained control.
- * The application installs a 64bit mask value in the socket,
- * where each bit corresponds to a group of ports.
- * When a congestion update arrives, RDS checks the set of
- * ports that are now uncongested against the list bit mask
- * installed in the socket, and if they overlap, we queue a
- * cong_notification on the socket.
- *
- * To install the congestion monitor bitmask, use RDS_CONG_MONITOR
- * with the 64bit mask.
- * Congestion updates are received via RDS_CMSG_CONG_UPDATE
- * control messages.
- *
- * The correspondence between bits and ports is
- *	1 << (portnum % 64)
- */
-#define RDS_CONG_MONITOR_SIZE	64
-#define RDS_CONG_MONITOR_BIT(port)  (((unsigned int) port) % RDS_CONG_MONITOR_SIZE)
-#define RDS_CONG_MONITOR_MASK(port) (1ULL << RDS_CONG_MONITOR_BIT(port))
-
-/*
- * RDMA related types
- */
-
-/*
- * This encapsulates a remote memory location.
- * In the current implementation, it contains the R_Key
- * of the remote memory region, and the offset into it
- * (so that the application does not have to worry about
- * alignment).
- */
-typedef uint64_t	rds_rdma_cookie_t;
-
-struct rds_iovec {
-	uint64_t	addr;
-	uint64_t	bytes;
-};
-
-struct rds_get_mr_args {
-	struct rds_iovec vec;
-	uint64_t	cookie_addr;
-	uint64_t	flags;
-};
-
-struct rds_get_mr_for_dest_args {
-	struct sockaddr_storage	dest_addr;
-	struct rds_iovec 	vec;
-	uint64_t		cookie_addr;
-	uint64_t		flags;
-};
-
-struct rds_free_mr_args {
-	rds_rdma_cookie_t cookie;
-	uint64_t	flags;
-};
-
-struct rds_rdma_args {
-	rds_rdma_cookie_t cookie;
-	struct rds_iovec remote_vec;
-	uint64_t	local_vec_addr;
-	uint64_t	nr_local;
-	uint64_t	flags;
-	uint64_t	user_token;
-};
-
-struct rds_atomic_args {
-	rds_rdma_cookie_t cookie;
-	uint64_t 	local_addr;
-	uint64_t 	remote_addr;
-	union {
-		struct {
-			uint64_t	compare;
-			uint64_t	swap;
-		} cswp;
-		struct {
-			uint64_t	add;
-		} fadd;
-		struct {
-			uint64_t	compare;
-			uint64_t	swap;
-			uint64_t	compare_mask;
-			uint64_t	swap_mask;
-		} m_cswp;
-		struct {
-			uint64_t	add;
-			uint64_t	nocarry_mask;
-		} m_fadd;
-	};
-	uint64_t	flags;
-	uint64_t	user_token;
-};
-
-struct rds_rdma_notify {
-	uint64_t	user_token;
-	int32_t		status;
-};
-
-#define RDS_RDMA_SUCCESS	0
-#define RDS_RDMA_REMOTE_ERROR	1
-#define RDS_RDMA_CANCELED	2
-#define RDS_RDMA_DROPPED	3
-#define RDS_RDMA_OTHER_ERROR	4
-
-/*
- * Common set of flags for all RDMA related structs
- */
-#define RDS_RDMA_READWRITE	0x0001
-#define RDS_RDMA_FENCE		0x0002	/* use FENCE for immediate send */
-#define RDS_RDMA_INVALIDATE	0x0004	/* invalidate R_Key after freeing MR */
-#define RDS_RDMA_USE_ONCE	0x0008	/* free MR after use */
-#define RDS_RDMA_DONTWAIT	0x0010	/* Don't wait in SET_BARRIER */
-#define RDS_RDMA_NOTIFY_ME	0x0020	/* Notify when operation completes */
-#define RDS_RDMA_SILENT		0x0040	/* Do not interrupt remote */
-
-#endif /* IB_RDS_H */
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index e0879a70e830..23b36304cd88 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -1,43 +1,9 @@
 #ifndef _LINUX_REBOOT_H
 #define _LINUX_REBOOT_H
 
-/*
- * Magic values required to use _reboot() system call.
- */
-
-#define	LINUX_REBOOT_MAGIC1	0xfee1dead
-#define	LINUX_REBOOT_MAGIC2	672274793
-#define	LINUX_REBOOT_MAGIC2A	85072278
-#define	LINUX_REBOOT_MAGIC2B	369367448
-#define	LINUX_REBOOT_MAGIC2C	537993216
-
-
-/*
- * Commands accepted by the _reboot() system call.
- *
- * RESTART     Restart system using default command and mode.
- * HALT        Stop OS and give system control to ROM monitor, if any.
- * CAD_ON      Ctrl-Alt-Del sequence causes RESTART command.
- * CAD_OFF     Ctrl-Alt-Del sequence sends SIGINT to init task.
- * POWER_OFF   Stop OS and remove all power from system, if possible.
- * RESTART2    Restart system using given command string.
- * SW_SUSPEND  Suspend system using software suspend if compiled in.
- * KEXEC       Restart system using a previously loaded Linux kernel
- */
-
-#define	LINUX_REBOOT_CMD_RESTART	0x01234567
-#define	LINUX_REBOOT_CMD_HALT		0xCDEF0123
-#define	LINUX_REBOOT_CMD_CAD_ON		0x89ABCDEF
-#define	LINUX_REBOOT_CMD_CAD_OFF	0x00000000
-#define	LINUX_REBOOT_CMD_POWER_OFF	0x4321FEDC
-#define	LINUX_REBOOT_CMD_RESTART2	0xA1B2C3D4
-#define	LINUX_REBOOT_CMD_SW_SUSPEND	0xD000FCE2
-#define	LINUX_REBOOT_CMD_KEXEC		0x45584543
-
-
-#ifdef __KERNEL__
 
 #include <linux/notifier.h>
+#include <uapi/linux/reboot.h>
 
 #define SYS_DOWN	0x0001	/* Notify of system down */
 #define SYS_RESTART	SYS_DOWN
@@ -84,6 +50,4 @@ extern int orderly_poweroff(bool force);
 extern void emergency_restart(void);
 #include <asm/emergency-restart.h>
 
-#endif
-
 #endif /* _LINUX_REBOOT_H */
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
deleted file mode 100644
index ea3700cd7367..000000000000
--- a/include/linux/reiserfs_fs.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 1996, 1997, 1998 Hans Reiser, see reiserfs/README for licensing and copyright details
- */
-#ifndef _LINUX_REISER_FS_H
-#define _LINUX_REISER_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/*
- *  include/linux/reiser_fs.h
- *
- *  Reiser File System constants and structures
- *
- */
-
-/* ioctl's command */
-#define REISERFS_IOC_UNPACK		_IOW(0xCD,1,long)
-/* define following flags to be the same as in ext2, so that chattr(1),
-   lsattr(1) will work with us. */
-#define REISERFS_IOC_GETFLAGS		FS_IOC_GETFLAGS
-#define REISERFS_IOC_SETFLAGS		FS_IOC_SETFLAGS
-#define REISERFS_IOC_GETVERSION		FS_IOC_GETVERSION
-#define REISERFS_IOC_SETVERSION		FS_IOC_SETVERSION
-
-#endif				/* _LINUX_REISER_FS_H */
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
deleted file mode 100644
index d8ce17c2459a..000000000000
--- a/include/linux/reiserfs_xattr.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-  File: linux/reiserfs_xattr.h
-*/
-
-#ifndef _LINUX_REISERFS_XATTR_H
-#define _LINUX_REISERFS_XATTR_H
-
-#include <linux/types.h>
-
-/* Magic value in header */
-#define REISERFS_XATTR_MAGIC 0x52465841	/* "RFXA" */
-
-struct reiserfs_xattr_header {
-	__le32 h_magic;		/* magic number for identification */
-	__le32 h_hash;		/* hash of the value */
-};
-
-struct reiserfs_security_handle {
-	char *name;
-	void *value;
-	size_t length;
-};
-
-#endif  /*  _LINUX_REISERFS_XATTR_H  */
diff --git a/include/linux/resource.h b/include/linux/resource.h
index d01c96c1966e..5bc3116e649c 100644
--- a/include/linux/resource.h
+++ b/include/linux/resource.h
@@ -1,82 +1,8 @@
 #ifndef _LINUX_RESOURCE_H
 #define _LINUX_RESOURCE_H
 
-#include <linux/time.h>
-#include <linux/types.h>
+#include <uapi/linux/resource.h>
 
-/*
- * Resource control/accounting header file for linux
- */
-
-/*
- * Definition of struct rusage taken from BSD 4.3 Reno
- * 
- * We don't support all of these yet, but we might as well have them....
- * Otherwise, each time we add new items, programs which depend on this
- * structure will lose.  This reduces the chances of that happening.
- */
-#define	RUSAGE_SELF	0
-#define	RUSAGE_CHILDREN	(-1)
-#define RUSAGE_BOTH	(-2)		/* sys_wait4() uses this */
-#define	RUSAGE_THREAD	1		/* only the calling thread */
-
-struct	rusage {
-	struct timeval ru_utime;	/* user time used */
-	struct timeval ru_stime;	/* system time used */
-	long	ru_maxrss;		/* maximum resident set size */
-	long	ru_ixrss;		/* integral shared memory size */
-	long	ru_idrss;		/* integral unshared data size */
-	long	ru_isrss;		/* integral unshared stack size */
-	long	ru_minflt;		/* page reclaims */
-	long	ru_majflt;		/* page faults */
-	long	ru_nswap;		/* swaps */
-	long	ru_inblock;		/* block input operations */
-	long	ru_oublock;		/* block output operations */
-	long	ru_msgsnd;		/* messages sent */
-	long	ru_msgrcv;		/* messages received */
-	long	ru_nsignals;		/* signals received */
-	long	ru_nvcsw;		/* voluntary context switches */
-	long	ru_nivcsw;		/* involuntary " */
-};
-
-struct rlimit {
-	unsigned long	rlim_cur;
-	unsigned long	rlim_max;
-};
-
-#define RLIM64_INFINITY		(~0ULL)
-
-struct rlimit64 {
-	__u64 rlim_cur;
-	__u64 rlim_max;
-};
-
-#define	PRIO_MIN	(-20)
-#define	PRIO_MAX	20
-
-#define	PRIO_PROCESS	0
-#define	PRIO_PGRP	1
-#define	PRIO_USER	2
-
-/*
- * Limit the stack by to some sane default: root can always
- * increase this limit if needed..  8MB seems reasonable.
- */
-#define _STK_LIM	(8*1024*1024)
-
-/*
- * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
- * and other sensitive information are never written to disk.
- */
-#define MLOCK_LIMIT	((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
-
-/*
- * Due to binary compatibility, the actual resource numbers
- * may be different for different linux versions..
- */
-#include <asm/resource.h>
-
-#ifdef __KERNEL__
 
 struct task_struct;
 
@@ -84,6 +10,4 @@ int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
 int do_prlimit(struct task_struct *tsk, unsigned int resource,
 		struct rlimit *new_rlim, struct rlimit *old_rlim);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 0ec590bb3611..d9010789b4e8 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -1,6 +1,3 @@
-#ifndef __RFKILL_H
-#define __RFKILL_H
-
 /*
  * Copyright (C) 2006 - 2007 Ivo van Doorn
  * Copyright (C) 2007 Dmitry Torokhov
@@ -18,92 +15,11 @@
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
+#ifndef __RFKILL_H
+#define __RFKILL_H
 
-#include <linux/types.h>
-
-/* define userspace visible states */
-#define RFKILL_STATE_SOFT_BLOCKED	0
-#define RFKILL_STATE_UNBLOCKED		1
-#define RFKILL_STATE_HARD_BLOCKED	2
-
-/**
- * enum rfkill_type - type of rfkill switch.
- *
- * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
- * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
- * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
- * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
- * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
- * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
- * @RFKILL_TYPE_GPS: switch is on a GPS device.
- * @RFKILL_TYPE_FM: switch is on a FM radio device.
- * @NUM_RFKILL_TYPES: number of defined rfkill types
- */
-enum rfkill_type {
-	RFKILL_TYPE_ALL = 0,
-	RFKILL_TYPE_WLAN,
-	RFKILL_TYPE_BLUETOOTH,
-	RFKILL_TYPE_UWB,
-	RFKILL_TYPE_WIMAX,
-	RFKILL_TYPE_WWAN,
-	RFKILL_TYPE_GPS,
-	RFKILL_TYPE_FM,
-	NUM_RFKILL_TYPES,
-};
-
-/**
- * enum rfkill_operation - operation types
- * @RFKILL_OP_ADD: a device was added
- * @RFKILL_OP_DEL: a device was removed
- * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
- * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
- */
-enum rfkill_operation {
-	RFKILL_OP_ADD = 0,
-	RFKILL_OP_DEL,
-	RFKILL_OP_CHANGE,
-	RFKILL_OP_CHANGE_ALL,
-};
-
-/**
- * struct rfkill_event - events for userspace on /dev/rfkill
- * @idx: index of dev rfkill
- * @type: type of the rfkill struct
- * @op: operation code
- * @hard: hard state (0/1)
- * @soft: soft state (0/1)
- *
- * Structure used for userspace communication on /dev/rfkill,
- * used for events from the kernel and control to the kernel.
- */
-struct rfkill_event {
-	__u32 idx;
-	__u8  type;
-	__u8  op;
-	__u8  soft, hard;
-} __attribute__((packed));
-
-/*
- * We are planning to be backward and forward compatible with changes
- * to the event struct, by adding new, optional, members at the end.
- * When reading an event (whether the kernel from userspace or vice
- * versa) we need to accept anything that's at least as large as the
- * version 1 event size, but might be able to accept other sizes in
- * the future.
- *
- * One exception is the kernel -- we already have two event sizes in
- * that we've made the 'hard' member optional since our only option
- * is to ignore it anyway.
- */
-#define RFKILL_EVENT_SIZE_V1	8
-
-/* ioctl for turning off rfkill-input (if present) */
-#define RFKILL_IOC_MAGIC	'R'
-#define RFKILL_IOC_NOINPUT	1
-#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+#include <uapi/linux/rfkill.h>
 
-/* and that's all userspace gets */
-#ifdef __KERNEL__
 /* don't allow anyone to use these in the kernel */
 enum rfkill_user_states {
 	RFKILL_USER_STATE_SOFT_BLOCKED	= RFKILL_STATE_SOFT_BLOCKED,
@@ -385,6 +301,4 @@ rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name)
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* RFKILL_H */
diff --git a/include/linux/romfs_fs.h b/include/linux/romfs_fs.h
deleted file mode 100644
index 5f57f93b284f..000000000000
--- a/include/linux/romfs_fs.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __LINUX_ROMFS_FS_H
-#define __LINUX_ROMFS_FS_H
-
-#include <linux/types.h>
-#include <linux/fs.h>
-
-/* The basic structures of the romfs filesystem */
-
-#define ROMBSIZE BLOCK_SIZE
-#define ROMBSBITS BLOCK_SIZE_BITS
-#define ROMBMASK (ROMBSIZE-1)
-#define ROMFS_MAGIC 0x7275
-
-#define ROMFS_MAXFN 128
-
-#define __mkw(h,l) (((h)&0x00ff)<< 8|((l)&0x00ff))
-#define __mkl(h,l) (((h)&0xffff)<<16|((l)&0xffff))
-#define __mk4(a,b,c,d) cpu_to_be32(__mkl(__mkw(a,b),__mkw(c,d)))
-#define ROMSB_WORD0 __mk4('-','r','o','m')
-#define ROMSB_WORD1 __mk4('1','f','s','-')
-
-/* On-disk "super block" */
-
-struct romfs_super_block {
-	__be32 word0;
-	__be32 word1;
-	__be32 size;
-	__be32 checksum;
-	char name[0];		/* volume name */
-};
-
-/* On disk inode */
-
-struct romfs_inode {
-	__be32 next;		/* low 4 bits see ROMFH_ */
-	__be32 spec;
-	__be32 size;
-	__be32 checksum;
-	char name[0];
-};
-
-#define ROMFH_TYPE 7
-#define ROMFH_HRD 0
-#define ROMFH_DIR 1
-#define ROMFH_REG 2
-#define ROMFH_SYM 3
-#define ROMFH_BLK 4
-#define ROMFH_CHR 5
-#define ROMFH_SCK 6
-#define ROMFH_FIF 7
-#define ROMFH_EXEC 8
-
-/* Alignment */
-
-#define ROMFH_SIZE 16
-#define ROMFH_PAD (ROMFH_SIZE-1)
-#define ROMFH_MASK (~ROMFH_PAD)
-
-#endif
diff --git a/include/linux/rose.h b/include/linux/rose.h
deleted file mode 100644
index 1fcfe95893b8..000000000000
--- a/include/linux/rose.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * These are the public elements of the Linux kernel Rose implementation.
- * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
- * definition of the ax25_address structure.
- */
-
-#ifndef	ROSE_KERNEL_H
-#define	ROSE_KERNEL_H
-
-#include <linux/socket.h>
-#include <linux/ax25.h>
-
-#define ROSE_MTU	251
-
-#define ROSE_MAX_DIGIS 6
-
-#define	ROSE_DEFER	1
-#define ROSE_T1		2
-#define	ROSE_T2		3
-#define	ROSE_T3		4
-#define	ROSE_IDLE	5
-#define	ROSE_QBITINCL	6
-#define	ROSE_HOLDBACK	7
-
-#define	SIOCRSGCAUSE		(SIOCPROTOPRIVATE+0)
-#define	SIOCRSSCAUSE		(SIOCPROTOPRIVATE+1)
-#define	SIOCRSL2CALL		(SIOCPROTOPRIVATE+2)
-#define	SIOCRSSL2CALL		(SIOCPROTOPRIVATE+2)
-#define	SIOCRSACCEPT		(SIOCPROTOPRIVATE+3)
-#define	SIOCRSCLRRT		(SIOCPROTOPRIVATE+4)
-#define	SIOCRSGL2CALL		(SIOCPROTOPRIVATE+5)
-#define	SIOCRSGFACILITIES	(SIOCPROTOPRIVATE+6)
-
-#define	ROSE_DTE_ORIGINATED	0x00
-#define	ROSE_NUMBER_BUSY	0x01
-#define	ROSE_INVALID_FACILITY	0x03
-#define	ROSE_NETWORK_CONGESTION	0x05
-#define	ROSE_OUT_OF_ORDER	0x09
-#define	ROSE_ACCESS_BARRED	0x0B
-#define	ROSE_NOT_OBTAINABLE	0x0D
-#define	ROSE_REMOTE_PROCEDURE	0x11
-#define	ROSE_LOCAL_PROCEDURE	0x13
-#define	ROSE_SHIP_ABSENT	0x39
-
-typedef struct {
-	char		rose_addr[5];
-} rose_address;
-
-struct sockaddr_rose {
-	__kernel_sa_family_t srose_family;
-	rose_address	srose_addr;
-	ax25_address	srose_call;
-	int		srose_ndigis;
-	ax25_address	srose_digi;
-};
-
-struct full_sockaddr_rose {
-	__kernel_sa_family_t srose_family;
-	rose_address	srose_addr;
-	ax25_address	srose_call;
-	unsigned int	srose_ndigis;
-	ax25_address	srose_digis[ROSE_MAX_DIGIS];
-};
-
-struct rose_route_struct {
-	rose_address	address;
-	unsigned short	mask;
-	ax25_address	neighbour;
-	char		device[16];
-	unsigned char	ndigis;
-	ax25_address	digipeaters[AX25_MAX_DIGIS];
-};
-
-struct rose_cause_struct {
-	unsigned char	cause;
-	unsigned char	diagnostic;
-};
-
-struct rose_facilities_struct {
-	rose_address	source_addr,   dest_addr;
-	ax25_address	source_call,   dest_call;
-	unsigned char	source_ndigis, dest_ndigis;
-	ax25_address	source_digis[ROSE_MAX_DIGIS];
-	ax25_address	dest_digis[ROSE_MAX_DIGIS];
-	unsigned int	rand;
-	rose_address	fail_addr;
-	ax25_address	fail_call;
-};
-
-#endif
diff --git a/include/linux/route.h b/include/linux/route.h
deleted file mode 100644
index 6600708311c8..000000000000
--- a/include/linux/route.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the IP router interface.
- *
- * Version:	@(#)route.h	1.0.3	05/27/93
- *
- * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
- *		for the purposes of compatibility only.
- *
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- * Changes:
- *              Mike McLagan    :       Routing by source
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_ROUTE_H
-#define _LINUX_ROUTE_H
-
-#include <linux/if.h>
-#include <linux/compiler.h>
-
-/* This structure gets passed by the SIOCADDRT and SIOCDELRT calls. */
-struct rtentry {
-	unsigned long	rt_pad1;
-	struct sockaddr	rt_dst;		/* target address		*/
-	struct sockaddr	rt_gateway;	/* gateway addr (RTF_GATEWAY)	*/
-	struct sockaddr	rt_genmask;	/* target network mask (IP)	*/
-	unsigned short	rt_flags;
-	short		rt_pad2;
-	unsigned long	rt_pad3;
-	void		*rt_pad4;
-	short		rt_metric;	/* +1 for binary compatibility!	*/
-	char __user	*rt_dev;	/* forcing the device at add	*/
-	unsigned long	rt_mtu;		/* per route MTU/Window 	*/
-#ifndef __KERNEL__
-#define rt_mss	rt_mtu			/* Compatibility :-(            */
-#endif
-	unsigned long	rt_window;	/* Window clamping 		*/
-	unsigned short	rt_irtt;	/* Initial RTT			*/
-};
-
-
-#define	RTF_UP		0x0001		/* route usable		  	*/
-#define	RTF_GATEWAY	0x0002		/* destination is a gateway	*/
-#define	RTF_HOST	0x0004		/* host entry (net otherwise)	*/
-#define RTF_REINSTATE	0x0008		/* reinstate route after tmout	*/
-#define	RTF_DYNAMIC	0x0010		/* created dyn. (by redirect)	*/
-#define	RTF_MODIFIED	0x0020		/* modified dyn. (by redirect)	*/
-#define RTF_MTU		0x0040		/* specific MTU for this route	*/
-#define RTF_MSS		RTF_MTU		/* Compatibility :-(		*/
-#define RTF_WINDOW	0x0080		/* per route window clamping	*/
-#define RTF_IRTT	0x0100		/* Initial round trip time	*/
-#define RTF_REJECT	0x0200		/* Reject route			*/
-
-/*
- *	<linux/ipv6_route.h> uses RTF values >= 64k
- */
-
-
-
-#endif	/* _LINUX_ROUTE_H */
-
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 20ec4d3bed73..9531845c419f 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -11,102 +11,10 @@
 #ifndef _LINUX_RTC_H_
 #define _LINUX_RTC_H_
 
-/*
- * The struct used to pass data via the following ioctl. Similar to the
- * struct tm in <time.h>, but it needs to be here so that the kernel
- * source is self contained, allowing cross-compiles, etc. etc.
- */
-
-struct rtc_time {
-	int tm_sec;
-	int tm_min;
-	int tm_hour;
-	int tm_mday;
-	int tm_mon;
-	int tm_year;
-	int tm_wday;
-	int tm_yday;
-	int tm_isdst;
-};
-
-/*
- * This data structure is inspired by the EFI (v0.92) wakeup
- * alarm API.
- */
-struct rtc_wkalrm {
-	unsigned char enabled;	/* 0 = alarm disabled, 1 = alarm enabled */
-	unsigned char pending;  /* 0 = alarm not pending, 1 = alarm pending */
-	struct rtc_time time;	/* time the alarm is set to */
-};
-
-/*
- * Data structure to control PLL correction some better RTC feature
- * pll_value is used to get or set current value of correction,
- * the rest of the struct is used to query HW capabilities.
- * This is modeled after the RTC used in Q40/Q60 computers but
- * should be sufficiently flexible for other devices
- *
- * +ve pll_value means clock will run faster by
- *   pll_value*pll_posmult/pll_clock
- * -ve pll_value means clock will run slower by
- *   pll_value*pll_negmult/pll_clock
- */
-
-struct rtc_pll_info {
-	int pll_ctrl;       /* placeholder for fancier control */
-	int pll_value;      /* get/set correction value */
-	int pll_max;        /* max +ve (faster) adjustment value */
-	int pll_min;        /* max -ve (slower) adjustment value */
-	int pll_posmult;    /* factor for +ve correction */
-	int pll_negmult;    /* factor for -ve correction */
-	long pll_clock;     /* base PLL frequency */
-};
-
-/*
- * ioctl calls that are permitted to the /dev/rtc interface, if
- * any of the RTC drivers are enabled.
- */
-
-#define RTC_AIE_ON	_IO('p', 0x01)	/* Alarm int. enable on		*/
-#define RTC_AIE_OFF	_IO('p', 0x02)	/* ... off			*/
-#define RTC_UIE_ON	_IO('p', 0x03)	/* Update int. enable on	*/
-#define RTC_UIE_OFF	_IO('p', 0x04)	/* ... off			*/
-#define RTC_PIE_ON	_IO('p', 0x05)	/* Periodic int. enable on	*/
-#define RTC_PIE_OFF	_IO('p', 0x06)	/* ... off			*/
-#define RTC_WIE_ON	_IO('p', 0x0f)  /* Watchdog int. enable on	*/
-#define RTC_WIE_OFF	_IO('p', 0x10)  /* ... off			*/
-
-#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
-#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) /* Read alarm time */
-#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time) /* Read RTC time   */
-#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */
-#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 /* Read IRQ rate   */
-#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 /* Set IRQ rate    */
-#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 /* Read epoch      */
-#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 /* Set epoch       */
-
-#define RTC_WKALM_SET	_IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
-#define RTC_WKALM_RD	_IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
-
-#define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
-#define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
-
-#define RTC_VL_READ	_IOR('p', 0x13, int)	/* Voltage low detector */
-#define RTC_VL_CLR	_IO('p', 0x14)		/* Clear voltage low information */
-
-/* interrupt flags */
-#define RTC_IRQF 0x80	/* Any of the following is active */
-#define RTC_PF 0x40	/* Periodic interrupt */
-#define RTC_AF 0x20	/* Alarm interrupt */
-#define RTC_UF 0x10	/* Update interrupt for 1Hz RTC */
-
-
-#define RTC_MAX_FREQ	8192
-
-#ifdef __KERNEL__
 
 #include <linux/types.h>
 #include <linux/interrupt.h>
+#include <uapi/linux/rtc.h>
 
 extern int rtc_month_days(unsigned int month, unsigned int year);
 extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year);
@@ -282,6 +190,4 @@ extern int rtc_hctosys_ret;
 #define rtc_hctosys_ret -ENODEV
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_RTC_H_ */
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index db71c4ad8624..7002bbfd5d4a 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -1,616 +1,10 @@
 #ifndef __LINUX_RTNETLINK_H
 #define __LINUX_RTNETLINK_H
 
-#include <linux/types.h>
-#include <linux/netlink.h>
-#include <linux/if_link.h>
-#include <linux/if_addr.h>
-#include <linux/neighbour.h>
-
-/* rtnetlink families. Values up to 127 are reserved for real address
- * families, values above 128 may be used arbitrarily.
- */
-#define RTNL_FAMILY_IPMR		128
-#define RTNL_FAMILY_IP6MR		129
-#define RTNL_FAMILY_MAX			129
-
-/****
- *		Routing/neighbour discovery messages.
- ****/
-
-/* Types of messages */
-
-enum {
-	RTM_BASE	= 16,
-#define RTM_BASE	RTM_BASE
-
-	RTM_NEWLINK	= 16,
-#define RTM_NEWLINK	RTM_NEWLINK
-	RTM_DELLINK,
-#define RTM_DELLINK	RTM_DELLINK
-	RTM_GETLINK,
-#define RTM_GETLINK	RTM_GETLINK
-	RTM_SETLINK,
-#define RTM_SETLINK	RTM_SETLINK
-
-	RTM_NEWADDR	= 20,
-#define RTM_NEWADDR	RTM_NEWADDR
-	RTM_DELADDR,
-#define RTM_DELADDR	RTM_DELADDR
-	RTM_GETADDR,
-#define RTM_GETADDR	RTM_GETADDR
-
-	RTM_NEWROUTE	= 24,
-#define RTM_NEWROUTE	RTM_NEWROUTE
-	RTM_DELROUTE,
-#define RTM_DELROUTE	RTM_DELROUTE
-	RTM_GETROUTE,
-#define RTM_GETROUTE	RTM_GETROUTE
-
-	RTM_NEWNEIGH	= 28,
-#define RTM_NEWNEIGH	RTM_NEWNEIGH
-	RTM_DELNEIGH,
-#define RTM_DELNEIGH	RTM_DELNEIGH
-	RTM_GETNEIGH,
-#define RTM_GETNEIGH	RTM_GETNEIGH
-
-	RTM_NEWRULE	= 32,
-#define RTM_NEWRULE	RTM_NEWRULE
-	RTM_DELRULE,
-#define RTM_DELRULE	RTM_DELRULE
-	RTM_GETRULE,
-#define RTM_GETRULE	RTM_GETRULE
-
-	RTM_NEWQDISC	= 36,
-#define RTM_NEWQDISC	RTM_NEWQDISC
-	RTM_DELQDISC,
-#define RTM_DELQDISC	RTM_DELQDISC
-	RTM_GETQDISC,
-#define RTM_GETQDISC	RTM_GETQDISC
-
-	RTM_NEWTCLASS	= 40,
-#define RTM_NEWTCLASS	RTM_NEWTCLASS
-	RTM_DELTCLASS,
-#define RTM_DELTCLASS	RTM_DELTCLASS
-	RTM_GETTCLASS,
-#define RTM_GETTCLASS	RTM_GETTCLASS
-
-	RTM_NEWTFILTER	= 44,
-#define RTM_NEWTFILTER	RTM_NEWTFILTER
-	RTM_DELTFILTER,
-#define RTM_DELTFILTER	RTM_DELTFILTER
-	RTM_GETTFILTER,
-#define RTM_GETTFILTER	RTM_GETTFILTER
-
-	RTM_NEWACTION	= 48,
-#define RTM_NEWACTION   RTM_NEWACTION
-	RTM_DELACTION,
-#define RTM_DELACTION   RTM_DELACTION
-	RTM_GETACTION,
-#define RTM_GETACTION   RTM_GETACTION
-
-	RTM_NEWPREFIX	= 52,
-#define RTM_NEWPREFIX	RTM_NEWPREFIX
-
-	RTM_GETMULTICAST = 58,
-#define RTM_GETMULTICAST RTM_GETMULTICAST
-
-	RTM_GETANYCAST	= 62,
-#define RTM_GETANYCAST	RTM_GETANYCAST
-
-	RTM_NEWNEIGHTBL	= 64,
-#define RTM_NEWNEIGHTBL	RTM_NEWNEIGHTBL
-	RTM_GETNEIGHTBL	= 66,
-#define RTM_GETNEIGHTBL	RTM_GETNEIGHTBL
-	RTM_SETNEIGHTBL,
-#define RTM_SETNEIGHTBL	RTM_SETNEIGHTBL
-
-	RTM_NEWNDUSEROPT = 68,
-#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
-
-	RTM_NEWADDRLABEL = 72,
-#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
-	RTM_DELADDRLABEL,
-#define RTM_DELADDRLABEL RTM_DELADDRLABEL
-	RTM_GETADDRLABEL,
-#define RTM_GETADDRLABEL RTM_GETADDRLABEL
-
-	RTM_GETDCB = 78,
-#define RTM_GETDCB RTM_GETDCB
-	RTM_SETDCB,
-#define RTM_SETDCB RTM_SETDCB
-
-	__RTM_MAX,
-#define RTM_MAX		(((__RTM_MAX + 3) & ~3) - 1)
-};
-
-#define RTM_NR_MSGTYPES	(RTM_MAX + 1 - RTM_BASE)
-#define RTM_NR_FAMILIES	(RTM_NR_MSGTYPES >> 2)
-#define RTM_FAM(cmd)	(((cmd) - RTM_BASE) >> 2)
-
-/* 
-   Generic structure for encapsulation of optional route information.
-   It is reminiscent of sockaddr, but with sa_family replaced
-   with attribute type.
- */
-
-struct rtattr {
-	unsigned short	rta_len;
-	unsigned short	rta_type;
-};
-
-/* Macros to handle rtattributes */
-
-#define RTA_ALIGNTO	4
-#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
-#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
-			 (rta)->rta_len >= sizeof(struct rtattr) && \
-			 (rta)->rta_len <= (len))
-#define RTA_NEXT(rta,attrlen)	((attrlen) -= RTA_ALIGN((rta)->rta_len), \
-				 (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
-#define RTA_LENGTH(len)	(RTA_ALIGN(sizeof(struct rtattr)) + (len))
-#define RTA_SPACE(len)	RTA_ALIGN(RTA_LENGTH(len))
-#define RTA_DATA(rta)   ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
-#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
-
-
-
-
-/******************************************************************************
- *		Definitions used in routing table administration.
- ****/
-
-struct rtmsg {
-	unsigned char		rtm_family;
-	unsigned char		rtm_dst_len;
-	unsigned char		rtm_src_len;
-	unsigned char		rtm_tos;
-
-	unsigned char		rtm_table;	/* Routing table id */
-	unsigned char		rtm_protocol;	/* Routing protocol; see below	*/
-	unsigned char		rtm_scope;	/* See below */	
-	unsigned char		rtm_type;	/* See below	*/
-
-	unsigned		rtm_flags;
-};
-
-/* rtm_type */
-
-enum {
-	RTN_UNSPEC,
-	RTN_UNICAST,		/* Gateway or direct route	*/
-	RTN_LOCAL,		/* Accept locally		*/
-	RTN_BROADCAST,		/* Accept locally as broadcast,
-				   send as broadcast */
-	RTN_ANYCAST,		/* Accept locally as broadcast,
-				   but send as unicast */
-	RTN_MULTICAST,		/* Multicast route		*/
-	RTN_BLACKHOLE,		/* Drop				*/
-	RTN_UNREACHABLE,	/* Destination is unreachable   */
-	RTN_PROHIBIT,		/* Administratively prohibited	*/
-	RTN_THROW,		/* Not in this table		*/
-	RTN_NAT,		/* Translate this address	*/
-	RTN_XRESOLVE,		/* Use external resolver	*/
-	__RTN_MAX
-};
-
-#define RTN_MAX (__RTN_MAX - 1)
-
-
-/* rtm_protocol */
-
-#define RTPROT_UNSPEC	0
-#define RTPROT_REDIRECT	1	/* Route installed by ICMP redirects;
-				   not used by current IPv4 */
-#define RTPROT_KERNEL	2	/* Route installed by kernel		*/
-#define RTPROT_BOOT	3	/* Route installed during boot		*/
-#define RTPROT_STATIC	4	/* Route installed by administrator	*/
-
-/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
-   they are just passed from user and back as is.
-   It will be used by hypothetical multiple routing daemons.
-   Note that protocol values should be standardized in order to
-   avoid conflicts.
- */
-
-#define RTPROT_GATED	8	/* Apparently, GateD */
-#define RTPROT_RA	9	/* RDISC/ND router advertisements */
-#define RTPROT_MRT	10	/* Merit MRT */
-#define RTPROT_ZEBRA	11	/* Zebra */
-#define RTPROT_BIRD	12	/* BIRD */
-#define RTPROT_DNROUTED	13	/* DECnet routing daemon */
-#define RTPROT_XORP	14	/* XORP */
-#define RTPROT_NTK	15	/* Netsukuku */
-#define RTPROT_DHCP	16      /* DHCP client */
-
-/* rtm_scope
-
-   Really it is not scope, but sort of distance to the destination.
-   NOWHERE are reserved for not existing destinations, HOST is our
-   local addresses, LINK are destinations, located on directly attached
-   link and UNIVERSE is everywhere in the Universe.
-
-   Intermediate values are also possible f.e. interior routes
-   could be assigned a value between UNIVERSE and LINK.
-*/
-
-enum rt_scope_t {
-	RT_SCOPE_UNIVERSE=0,
-/* User defined values  */
-	RT_SCOPE_SITE=200,
-	RT_SCOPE_LINK=253,
-	RT_SCOPE_HOST=254,
-	RT_SCOPE_NOWHERE=255
-};
-
-/* rtm_flags */
-
-#define RTM_F_NOTIFY		0x100	/* Notify user of route change	*/
-#define RTM_F_CLONED		0x200	/* This route is cloned		*/
-#define RTM_F_EQUALIZE		0x400	/* Multipath equalizer: NI	*/
-#define RTM_F_PREFIX		0x800	/* Prefix addresses		*/
-
-/* Reserved table identifiers */
-
-enum rt_class_t {
-	RT_TABLE_UNSPEC=0,
-/* User defined values */
-	RT_TABLE_COMPAT=252,
-	RT_TABLE_DEFAULT=253,
-	RT_TABLE_MAIN=254,
-	RT_TABLE_LOCAL=255,
-	RT_TABLE_MAX=0xFFFFFFFF
-};
-
-
-/* Routing message attributes */
-
-enum rtattr_type_t {
-	RTA_UNSPEC,
-	RTA_DST,
-	RTA_SRC,
-	RTA_IIF,
-	RTA_OIF,
-	RTA_GATEWAY,
-	RTA_PRIORITY,
-	RTA_PREFSRC,
-	RTA_METRICS,
-	RTA_MULTIPATH,
-	RTA_PROTOINFO, /* no longer used */
-	RTA_FLOW,
-	RTA_CACHEINFO,
-	RTA_SESSION, /* no longer used */
-	RTA_MP_ALGO, /* no longer used */
-	RTA_TABLE,
-	RTA_MARK,
-	__RTA_MAX
-};
-
-#define RTA_MAX (__RTA_MAX - 1)
-
-#define RTM_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
-#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
-
-/* RTM_MULTIPATH --- array of struct rtnexthop.
- *
- * "struct rtnexthop" describes all necessary nexthop information,
- * i.e. parameters of path to a destination via this nexthop.
- *
- * At the moment it is impossible to set different prefsrc, mtu, window
- * and rtt for different paths from multipath.
- */
-
-struct rtnexthop {
-	unsigned short		rtnh_len;
-	unsigned char		rtnh_flags;
-	unsigned char		rtnh_hops;
-	int			rtnh_ifindex;
-};
-
-/* rtnh_flags */
-
-#define RTNH_F_DEAD		1	/* Nexthop is dead (used by multipath)	*/
-#define RTNH_F_PERVASIVE	2	/* Do recursive gateway lookup	*/
-#define RTNH_F_ONLINK		4	/* Gateway is forced on link	*/
-
-/* Macros to handle hexthops */
-
-#define RTNH_ALIGNTO	4
-#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
-#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
-			   ((int)(rtnh)->rtnh_len) <= (len))
-#define RTNH_NEXT(rtnh)	((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
-#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
-#define RTNH_SPACE(len)	RTNH_ALIGN(RTNH_LENGTH(len))
-#define RTNH_DATA(rtnh)   ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
-
-/* RTM_CACHEINFO */
-
-struct rta_cacheinfo {
-	__u32	rta_clntref;
-	__u32	rta_lastuse;
-	__s32	rta_expires;
-	__u32	rta_error;
-	__u32	rta_used;
-
-#define RTNETLINK_HAVE_PEERINFO 1
-	__u32	rta_id;
-	__u32	rta_ts;
-	__u32	rta_tsage;
-};
-
-/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
-
-enum {
-	RTAX_UNSPEC,
-#define RTAX_UNSPEC RTAX_UNSPEC
-	RTAX_LOCK,
-#define RTAX_LOCK RTAX_LOCK
-	RTAX_MTU,
-#define RTAX_MTU RTAX_MTU
-	RTAX_WINDOW,
-#define RTAX_WINDOW RTAX_WINDOW
-	RTAX_RTT,
-#define RTAX_RTT RTAX_RTT
-	RTAX_RTTVAR,
-#define RTAX_RTTVAR RTAX_RTTVAR
-	RTAX_SSTHRESH,
-#define RTAX_SSTHRESH RTAX_SSTHRESH
-	RTAX_CWND,
-#define RTAX_CWND RTAX_CWND
-	RTAX_ADVMSS,
-#define RTAX_ADVMSS RTAX_ADVMSS
-	RTAX_REORDERING,
-#define RTAX_REORDERING RTAX_REORDERING
-	RTAX_HOPLIMIT,
-#define RTAX_HOPLIMIT RTAX_HOPLIMIT
-	RTAX_INITCWND,
-#define RTAX_INITCWND RTAX_INITCWND
-	RTAX_FEATURES,
-#define RTAX_FEATURES RTAX_FEATURES
-	RTAX_RTO_MIN,
-#define RTAX_RTO_MIN RTAX_RTO_MIN
-	RTAX_INITRWND,
-#define RTAX_INITRWND RTAX_INITRWND
-	__RTAX_MAX
-};
-
-#define RTAX_MAX (__RTAX_MAX - 1)
-
-#define RTAX_FEATURE_ECN	0x00000001
-#define RTAX_FEATURE_SACK	0x00000002
-#define RTAX_FEATURE_TIMESTAMP	0x00000004
-#define RTAX_FEATURE_ALLFRAG	0x00000008
-
-struct rta_session {
-	__u8	proto;
-	__u8	pad1;
-	__u16	pad2;
-
-	union {
-		struct {
-			__u16	sport;
-			__u16	dport;
-		} ports;
-
-		struct {
-			__u8	type;
-			__u8	code;
-			__u16	ident;
-		} icmpt;
-
-		__u32		spi;
-	} u;
-};
-
-/****
- *		General form of address family dependent message.
- ****/
-
-struct rtgenmsg {
-	unsigned char		rtgen_family;
-};
-
-/*****************************************************************
- *		Link layer specific messages.
- ****/
-
-/* struct ifinfomsg
- * passes link level specific information, not dependent
- * on network protocol.
- */
-
-struct ifinfomsg {
-	unsigned char	ifi_family;
-	unsigned char	__ifi_pad;
-	unsigned short	ifi_type;		/* ARPHRD_* */
-	int		ifi_index;		/* Link index	*/
-	unsigned	ifi_flags;		/* IFF_* flags	*/
-	unsigned	ifi_change;		/* IFF_* change mask */
-};
-
-/********************************************************************
- *		prefix information 
- ****/
-
-struct prefixmsg {
-	unsigned char	prefix_family;
-	unsigned char	prefix_pad1;
-	unsigned short	prefix_pad2;
-	int		prefix_ifindex;
-	unsigned char	prefix_type;
-	unsigned char	prefix_len;
-	unsigned char	prefix_flags;
-	unsigned char	prefix_pad3;
-};
-
-enum 
-{
-	PREFIX_UNSPEC,
-	PREFIX_ADDRESS,
-	PREFIX_CACHEINFO,
-	__PREFIX_MAX
-};
-
-#define PREFIX_MAX	(__PREFIX_MAX - 1)
-
-struct prefix_cacheinfo {
-	__u32	preferred_time;
-	__u32	valid_time;
-};
-
-
-/*****************************************************************
- *		Traffic control messages.
- ****/
-
-struct tcmsg {
-	unsigned char	tcm_family;
-	unsigned char	tcm__pad1;
-	unsigned short	tcm__pad2;
-	int		tcm_ifindex;
-	__u32		tcm_handle;
-	__u32		tcm_parent;
-	__u32		tcm_info;
-};
-
-enum {
-	TCA_UNSPEC,
-	TCA_KIND,
-	TCA_OPTIONS,
-	TCA_STATS,
-	TCA_XSTATS,
-	TCA_RATE,
-	TCA_FCNT,
-	TCA_STATS2,
-	TCA_STAB,
-	__TCA_MAX
-};
-
-#define TCA_MAX (__TCA_MAX - 1)
-
-#define TCA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
-#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
-
-/********************************************************************
- *		Neighbor Discovery userland options
- ****/
-
-struct nduseroptmsg {
-	unsigned char	nduseropt_family;
-	unsigned char	nduseropt_pad1;
-	unsigned short	nduseropt_opts_len;	/* Total length of options */
-	int		nduseropt_ifindex;
-	__u8		nduseropt_icmp_type;
-	__u8		nduseropt_icmp_code;
-	unsigned short	nduseropt_pad2;
-	unsigned int	nduseropt_pad3;
-	/* Followed by one or more ND options */
-};
-
-enum {
-	NDUSEROPT_UNSPEC,
-	NDUSEROPT_SRCADDR,
-	__NDUSEROPT_MAX
-};
-
-#define NDUSEROPT_MAX	(__NDUSEROPT_MAX - 1)
-
-#ifndef __KERNEL__
-/* RTnetlink multicast groups - backwards compatibility for userspace */
-#define RTMGRP_LINK		1
-#define RTMGRP_NOTIFY		2
-#define RTMGRP_NEIGH		4
-#define RTMGRP_TC		8
-
-#define RTMGRP_IPV4_IFADDR	0x10
-#define RTMGRP_IPV4_MROUTE	0x20
-#define RTMGRP_IPV4_ROUTE	0x40
-#define RTMGRP_IPV4_RULE	0x80
-
-#define RTMGRP_IPV6_IFADDR	0x100
-#define RTMGRP_IPV6_MROUTE	0x200
-#define RTMGRP_IPV6_ROUTE	0x400
-#define RTMGRP_IPV6_IFINFO	0x800
-
-#define RTMGRP_DECnet_IFADDR    0x1000
-#define RTMGRP_DECnet_ROUTE     0x4000
-
-#define RTMGRP_IPV6_PREFIX	0x20000
-#endif
-
-/* RTnetlink multicast groups */
-enum rtnetlink_groups {
-	RTNLGRP_NONE,
-#define RTNLGRP_NONE		RTNLGRP_NONE
-	RTNLGRP_LINK,
-#define RTNLGRP_LINK		RTNLGRP_LINK
-	RTNLGRP_NOTIFY,
-#define RTNLGRP_NOTIFY		RTNLGRP_NOTIFY
-	RTNLGRP_NEIGH,
-#define RTNLGRP_NEIGH		RTNLGRP_NEIGH
-	RTNLGRP_TC,
-#define RTNLGRP_TC		RTNLGRP_TC
-	RTNLGRP_IPV4_IFADDR,
-#define RTNLGRP_IPV4_IFADDR	RTNLGRP_IPV4_IFADDR
-	RTNLGRP_IPV4_MROUTE,
-#define	RTNLGRP_IPV4_MROUTE	RTNLGRP_IPV4_MROUTE
-	RTNLGRP_IPV4_ROUTE,
-#define RTNLGRP_IPV4_ROUTE	RTNLGRP_IPV4_ROUTE
-	RTNLGRP_IPV4_RULE,
-#define RTNLGRP_IPV4_RULE	RTNLGRP_IPV4_RULE
-	RTNLGRP_IPV6_IFADDR,
-#define RTNLGRP_IPV6_IFADDR	RTNLGRP_IPV6_IFADDR
-	RTNLGRP_IPV6_MROUTE,
-#define RTNLGRP_IPV6_MROUTE	RTNLGRP_IPV6_MROUTE
-	RTNLGRP_IPV6_ROUTE,
-#define RTNLGRP_IPV6_ROUTE	RTNLGRP_IPV6_ROUTE
-	RTNLGRP_IPV6_IFINFO,
-#define RTNLGRP_IPV6_IFINFO	RTNLGRP_IPV6_IFINFO
-	RTNLGRP_DECnet_IFADDR,
-#define RTNLGRP_DECnet_IFADDR	RTNLGRP_DECnet_IFADDR
-	RTNLGRP_NOP2,
-	RTNLGRP_DECnet_ROUTE,
-#define RTNLGRP_DECnet_ROUTE	RTNLGRP_DECnet_ROUTE
-	RTNLGRP_DECnet_RULE,
-#define RTNLGRP_DECnet_RULE	RTNLGRP_DECnet_RULE
-	RTNLGRP_NOP4,
-	RTNLGRP_IPV6_PREFIX,
-#define RTNLGRP_IPV6_PREFIX	RTNLGRP_IPV6_PREFIX
-	RTNLGRP_IPV6_RULE,
-#define RTNLGRP_IPV6_RULE	RTNLGRP_IPV6_RULE
-	RTNLGRP_ND_USEROPT,
-#define RTNLGRP_ND_USEROPT	RTNLGRP_ND_USEROPT
-	RTNLGRP_PHONET_IFADDR,
-#define RTNLGRP_PHONET_IFADDR	RTNLGRP_PHONET_IFADDR
-	RTNLGRP_PHONET_ROUTE,
-#define RTNLGRP_PHONET_ROUTE	RTNLGRP_PHONET_ROUTE
-	RTNLGRP_DCB,
-#define RTNLGRP_DCB		RTNLGRP_DCB
-	__RTNLGRP_MAX
-};
-#define RTNLGRP_MAX	(__RTNLGRP_MAX - 1)
-
-/* TC action piece */
-struct tcamsg {
-	unsigned char	tca_family;
-	unsigned char	tca__pad1;
-	unsigned short	tca__pad2;
-};
-#define TA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
-#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
-#define TCA_ACT_TAB 1 /* attr type must be >=1 */	
-#define TCAA_MAX 1
-
-/* New extended info filters for IFLA_EXT_MASK */
-#define RTEXT_FILTER_VF		(1 << 0)
-
-/* End of information exported to user level */
-
-#ifdef __KERNEL__
 
 #include <linux/mutex.h>
 #include <linux/netdevice.h>
+#include <uapi/linux/rtnetlink.h>
 
 extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo);
 extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid);
@@ -675,7 +69,4 @@ extern int ndo_dflt_fdb_dump(struct sk_buff *skb,
 			     struct netlink_callback *cb,
 			     struct net_device *dev,
 			     int idx);
-#endif /* __KERNEL__ */
-
-
 #endif	/* __LINUX_RTNETLINK_H */
diff --git a/include/linux/scc.h b/include/linux/scc.h
index 3495bd953cc6..c5a004962679 100644
--- a/include/linux/scc.h
+++ b/include/linux/scc.h
@@ -1,175 +1,9 @@
 /* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
-
 #ifndef	_SCC_H
 #define	_SCC_H
 
+#include <uapi/linux/scc.h>
 
-/* selection of hardware types */
-
-#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
-#define EAGLE		0x01    /* hardware type for EAGLE card */
-#define PC100		0x02	/* hardware type for PC100 card */
-#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
-#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
-#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
-
-/* DEV ioctl() commands */
-
-enum SCC_ioctl_cmds {
-	SIOCSCCRESERVED = SIOCDEVPRIVATE,
-	SIOCSCCCFG,
-	SIOCSCCINI,
-	SIOCSCCCHANINI,
-	SIOCSCCSMEM,
-	SIOCSCCGKISS,
-	SIOCSCCSKISS,
-	SIOCSCCGSTAT,
-	SIOCSCCCAL
-};
-
-/* Device parameter control (from WAMPES) */
-
-enum L1_params {
-	PARAM_DATA,
-	PARAM_TXDELAY,
-	PARAM_PERSIST,
-	PARAM_SLOTTIME,
-	PARAM_TXTAIL,
-	PARAM_FULLDUP,
-	PARAM_SOFTDCD,		/* was: PARAM_HW */
-	PARAM_MUTE,		/* ??? */
-	PARAM_DTR,
-	PARAM_RTS,
-	PARAM_SPEED,
-	PARAM_ENDDELAY,		/* ??? */
-	PARAM_GROUP,
-	PARAM_IDLE,
-	PARAM_MIN,
-	PARAM_MAXKEY,
-	PARAM_WAIT,
-	PARAM_MAXDEFER,
-	PARAM_TX,
-	PARAM_HWEVENT = 31,
-	PARAM_RETURN = 255	/* reset kiss mode */
-};
-
-/* fulldup parameter */
-
-enum FULLDUP_modes {
-	KISS_DUPLEX_HALF,	/* normal CSMA operation */
-	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
-	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
-	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
-};
-
-/* misc. parameters */
-
-#define TIMER_OFF	65535U	/* to switch off timers */
-#define NO_SUCH_PARAM	65534U	/* param not implemented */
-
-/* HWEVENT parameter */
-
-enum HWEVENT_opts {
-	HWEV_DCD_ON,
-	HWEV_DCD_OFF,
-	HWEV_ALL_SENT
-};
-
-/* channel grouping */
-
-#define RXGROUP		0100	/* if set, only tx when all channels clear */
-#define TXGROUP		0200	/* if set, don't transmit simultaneously */
-
-/* Tx/Rx clock sources */
-
-enum CLOCK_sources {
-	CLK_DPLL,	/* normal halfduplex operation */
-	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
-	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
-			/* modems without clock regeneration */
-	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
-			/* MODEMs without clock recovery */
-};
-
-/* Tx state */
-
-enum TX_state {
-	TXS_IDLE,	/* Transmitter off, no data pending */
-	TXS_BUSY,	/* waiting for permission to send / tailtime */
-	TXS_ACTIVE,	/* Transmitter on, sending data */
-	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
-	TXS_IDLE2,	/* Transmitter on, no data pending */
-	TXS_WAIT,	/* Waiting for Mintime to expire */
-	TXS_TIMEOUT	/* We had a transmission timeout */
-};
-
-typedef unsigned long io_port;	/* type definition for an 'io port address' */
-
-/* SCC statistical information */
-
-struct scc_stat {
-        long rxints;            /* Receiver interrupts */
-        long txints;            /* Transmitter interrupts */
-        long exints;            /* External/status interrupts */
-        long spints;            /* Special receiver interrupts */
-
-        long txframes;          /* Packets sent */
-        long rxframes;          /* Number of Frames Actually Received */
-        long rxerrs;            /* CRC Errors */
-        long txerrs;		/* KISS errors */
-        
-	unsigned int nospace;	/* "Out of buffers" */
-	unsigned int rx_over;	/* Receiver Overruns */
-	unsigned int tx_under;	/* Transmitter Underruns */
-
-	unsigned int tx_state;	/* Transmitter state */
-	int tx_queued;		/* tx frames enqueued */
-
-	unsigned int maxqueue;	/* allocated tx_buffers */
-	unsigned int bufsize;	/* used buffersize */
-};
-
-struct scc_modem {
-	long speed;		/* Line speed, bps */
-	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
-	char nrz;		/* NRZ instead of NRZI */	
-};
-
-struct scc_kiss_cmd {
-	int  	 command;	/* one of the KISS-Commands defined above */
-	unsigned param;		/* KISS-Param */
-};
-
-struct scc_hw_config {
-	io_port data_a;		/* data port channel A */
-	io_port ctrl_a;		/* control port channel A */
-	io_port data_b;		/* data port channel B */
-	io_port ctrl_b;		/* control port channel B */
-	io_port vector_latch;	/* INTACK-Latch (#) */
-	io_port	special;	/* special function port */
-
-	int	irq;		/* irq */
-	long	clock;		/* clock */
-	char	option;		/* command for function port */
-
-	char brand;		/* hardware type */
-	char escc;		/* use ext. features of a 8580/85180/85280 */
-};
-
-/* (#) only one INTACK latch allowed. */
-
-
-struct scc_mem_config {
-	unsigned int dummy;
-	unsigned int bufsize;
-};
-
-struct scc_calibrate {
-	unsigned int time;
-	unsigned char pattern;
-};
-
-#ifdef __KERNEL__
 
 enum {TX_OFF, TX_ON};	/* command for scc_key_trx() */
 
@@ -248,5 +82,4 @@ struct scc_channel {
 	spinlock_t	lock;		/* Channel guard lock */
 };
 
-#endif /* defined(__KERNEL__) */
 #endif /* defined(_SCC_H) */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index a83ca5816ecb..0dd42a02df2e 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1,48 +1,8 @@
 #ifndef _LINUX_SCHED_H
 #define _LINUX_SCHED_H
 
-/*
- * cloning flags:
- */
-#define CSIGNAL		0x000000ff	/* signal mask to be sent at exit */
-#define CLONE_VM	0x00000100	/* set if VM shared between processes */
-#define CLONE_FS	0x00000200	/* set if fs info shared between processes */
-#define CLONE_FILES	0x00000400	/* set if open files shared between processes */
-#define CLONE_SIGHAND	0x00000800	/* set if signal handlers and blocked signals shared */
-#define CLONE_PTRACE	0x00002000	/* set if we want to let tracing continue on the child too */
-#define CLONE_VFORK	0x00004000	/* set if the parent wants the child to wake it up on mm_release */
-#define CLONE_PARENT	0x00008000	/* set if we want to have the same parent as the cloner */
-#define CLONE_THREAD	0x00010000	/* Same thread group? */
-#define CLONE_NEWNS	0x00020000	/* New namespace group? */
-#define CLONE_SYSVSEM	0x00040000	/* share system V SEM_UNDO semantics */
-#define CLONE_SETTLS	0x00080000	/* create a new TLS for the child */
-#define CLONE_PARENT_SETTID	0x00100000	/* set the TID in the parent */
-#define CLONE_CHILD_CLEARTID	0x00200000	/* clear the TID in the child */
-#define CLONE_DETACHED		0x00400000	/* Unused, ignored */
-#define CLONE_UNTRACED		0x00800000	/* set if the tracing process can't force CLONE_PTRACE on this clone */
-#define CLONE_CHILD_SETTID	0x01000000	/* set the TID in the child */
-/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
-   and is now available for re-use. */
-#define CLONE_NEWUTS		0x04000000	/* New utsname group? */
-#define CLONE_NEWIPC		0x08000000	/* New ipcs */
-#define CLONE_NEWUSER		0x10000000	/* New user namespace */
-#define CLONE_NEWPID		0x20000000	/* New pid namespace */
-#define CLONE_NEWNET		0x40000000	/* New network namespace */
-#define CLONE_IO		0x80000000	/* Clone io context */
-
-/*
- * Scheduling policies
- */
-#define SCHED_NORMAL		0
-#define SCHED_FIFO		1
-#define SCHED_RR		2
-#define SCHED_BATCH		3
-/* SCHED_ISO: reserved but not implemented yet */
-#define SCHED_IDLE		5
-/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
-#define SCHED_RESET_ON_FORK     0x40000000
+#include <uapi/linux/sched.h>
 
-#ifdef __KERNEL__
 
 struct sched_param {
 	int sched_priority;
@@ -2828,6 +2788,4 @@ static inline unsigned long rlimit_max(unsigned int limit)
 	return task_rlimit_max(current, limit);
 }
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index fb3c5a8fef3d..005bf3e38db5 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -1,76 +1,8 @@
 #ifndef _SCREEN_INFO_H
 #define _SCREEN_INFO_H
 
-#include <linux/types.h>
+#include <uapi/linux/screen_info.h>
 
-/*
- * These are set up by the setup-routine at boot-time:
- */
-
-struct screen_info {
-	__u8  orig_x;		/* 0x00 */
-	__u8  orig_y;		/* 0x01 */
-	__u16 ext_mem_k;	/* 0x02 */
-	__u16 orig_video_page;	/* 0x04 */
-	__u8  orig_video_mode;	/* 0x06 */
-	__u8  orig_video_cols;	/* 0x07 */
-	__u8  flags;		/* 0x08 */
-	__u8  unused2;		/* 0x09 */
-	__u16 orig_video_ega_bx;/* 0x0a */
-	__u16 unused3;		/* 0x0c */
-	__u8  orig_video_lines;	/* 0x0e */
-	__u8  orig_video_isVGA;	/* 0x0f */
-	__u16 orig_video_points;/* 0x10 */
-
-	/* VESA graphic mode -- linear frame buffer */
-	__u16 lfb_width;	/* 0x12 */
-	__u16 lfb_height;	/* 0x14 */
-	__u16 lfb_depth;	/* 0x16 */
-	__u32 lfb_base;		/* 0x18 */
-	__u32 lfb_size;		/* 0x1c */
-	__u16 cl_magic, cl_offset; /* 0x20 */
-	__u16 lfb_linelength;	/* 0x24 */
-	__u8  red_size;		/* 0x26 */
-	__u8  red_pos;		/* 0x27 */
-	__u8  green_size;	/* 0x28 */
-	__u8  green_pos;	/* 0x29 */
-	__u8  blue_size;	/* 0x2a */
-	__u8  blue_pos;		/* 0x2b */
-	__u8  rsvd_size;	/* 0x2c */
-	__u8  rsvd_pos;		/* 0x2d */
-	__u16 vesapm_seg;	/* 0x2e */
-	__u16 vesapm_off;	/* 0x30 */
-	__u16 pages;		/* 0x32 */
-	__u16 vesa_attributes;	/* 0x34 */
-	__u32 capabilities;     /* 0x36 */
-	__u8  _reserved[6];	/* 0x3a */
-} __attribute__((packed));
-
-#define VIDEO_TYPE_MDA		0x10	/* Monochrome Text Display	*/
-#define VIDEO_TYPE_CGA		0x11	/* CGA Display 			*/
-#define VIDEO_TYPE_EGAM		0x20	/* EGA/VGA in Monochrome Mode	*/
-#define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
-#define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
-#define VIDEO_TYPE_VLFB		0x23	/* VESA VGA in graphic mode	*/
-
-#define VIDEO_TYPE_PICA_S3	0x30	/* ACER PICA-61 local S3 video	*/
-#define VIDEO_TYPE_MIPS_G364	0x31    /* MIPS Magnum 4000 G364 video  */
-#define VIDEO_TYPE_SGI          0x33    /* Various SGI graphics hardware */
-
-#define VIDEO_TYPE_TGAC		0x40	/* DEC TGA */
-
-#define VIDEO_TYPE_SUN          0x50    /* Sun frame buffer. */
-#define VIDEO_TYPE_SUNPCI       0x51    /* Sun PCI based frame buffer. */
-
-#define VIDEO_TYPE_PMAC		0x60	/* PowerMacintosh frame buffer. */
-
-#define VIDEO_TYPE_EFI		0x70	/* EFI graphic mode		*/
-
-#define VIDEO_FLAGS_NOCURSOR	(1 << 0) /* The video mode has no cursor set */
-
-#define VIDEO_CAPABILITY_SKIP_QUIRKS	(1 << 0)
-
-#ifdef __KERNEL__
 extern struct screen_info screen_info;
 
 #define ORIG_X			(screen_info.orig_x)
@@ -81,6 +13,4 @@ extern struct screen_info screen_info;
 #define ORIG_VIDEO_LINES	(screen_info.orig_video_lines)
 #define ORIG_VIDEO_ISVGA	(screen_info.orig_video_isVGA)
 #define ORIG_VIDEO_POINTS       (screen_info.orig_video_points)
-#endif /* __KERNEL__ */
-
 #endif /* _SCREEN_INFO_H */
diff --git a/include/linux/sdla.h b/include/linux/sdla.h
index 9995c7fc3f60..fe7a967d7de4 100644
--- a/include/linux/sdla.h
+++ b/include/linux/sdla.h
@@ -19,100 +19,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
-
 #ifndef SDLA_H
 #define SDLA_H
 
-/* adapter type */
-#define SDLA_TYPES
-#define SDLA_S502A			5020
-#define SDLA_S502E			5021
-#define SDLA_S503			5030
-#define SDLA_S507			5070
-#define SDLA_S508			5080
-#define SDLA_S509			5090
-#define SDLA_UNKNOWN			-1
-
-/* port selection flags for the S508 */
-#define SDLA_S508_PORT_V35		0x00
-#define SDLA_S508_PORT_RS232		0x02
-
-/* Z80 CPU speeds */
-#define SDLA_CPU_3M			0x00
-#define SDLA_CPU_5M			0x01
-#define SDLA_CPU_7M			0x02
-#define SDLA_CPU_8M			0x03
-#define SDLA_CPU_10M			0x04
-#define SDLA_CPU_16M			0x05
-#define SDLA_CPU_12M			0x06
-
-/* some private IOCTLs */
-#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
-#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
-#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
-
-#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
-#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
-#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
-
-struct sdla_mem {
-   int  addr;
-   int  len;
-   void __user *data;
-};
-
-#define SDLA_START			(FRAD_LAST_IOCTL + 7)
-#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
+#include <uapi/linux/sdla.h>
 
-/* some offsets in the Z80's memory space */
-#define SDLA_NMIADDR			0x0000
-#define SDLA_CONF_ADDR			0x0010
-#define SDLA_S502A_NMIADDR		0x0066
-#define SDLA_CODE_BASEADDR		0x0100
-#define SDLA_WINDOW_SIZE		0x2000
-#define SDLA_ADDR_MASK			0x1FFF
-
-/* largest handleable block of data */
-#define SDLA_MAX_DATA			4080
-#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
-#define SDLA_MAX_DLCI			24
-
-/* this should be the same as frad_conf */
-struct sdla_conf {
-   short station;
-   short config;
-   short kbaud;
-   short clocking;
-   short max_frm;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-};
-
-/* this should be the same as dlci_conf */
-struct sdla_dlci_conf {
-   short config;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-};
-
-#ifdef __KERNEL__
 
 /* important Z80 window addresses */
 #define SDLA_CONTROL_WND		0xE000
@@ -331,5 +242,3 @@ struct buf_entry {
 } __attribute__((packed));
 
 #endif
-
-#endif
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 84f6320da50f..6f19cfd1840e 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -1,50 +1,8 @@
 #ifndef _LINUX_SECCOMP_H
 #define _LINUX_SECCOMP_H
 
-#include <linux/compiler.h>
-#include <linux/types.h>
+#include <uapi/linux/seccomp.h>
 
-
-/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */
-#define SECCOMP_MODE_DISABLED	0 /* seccomp is not in use. */
-#define SECCOMP_MODE_STRICT	1 /* uses hard-coded filter. */
-#define SECCOMP_MODE_FILTER	2 /* uses user-supplied filter. */
-
-/*
- * All BPF programs must return a 32-bit value.
- * The bottom 16-bits are for optional return data.
- * The upper 16-bits are ordered from least permissive values to most.
- *
- * The ordering ensures that a min_t() over composed return values always
- * selects the least permissive choice.
- */
-#define SECCOMP_RET_KILL	0x00000000U /* kill the task immediately */
-#define SECCOMP_RET_TRAP	0x00030000U /* disallow and force a SIGSYS */
-#define SECCOMP_RET_ERRNO	0x00050000U /* returns an errno */
-#define SECCOMP_RET_TRACE	0x7ff00000U /* pass to a tracer or disallow */
-#define SECCOMP_RET_ALLOW	0x7fff0000U /* allow */
-
-/* Masks for the return value sections. */
-#define SECCOMP_RET_ACTION	0x7fff0000U
-#define SECCOMP_RET_DATA	0x0000ffffU
-
-/**
- * struct seccomp_data - the format the BPF program executes over.
- * @nr: the system call number
- * @arch: indicates system call convention as an AUDIT_ARCH_* value
- *        as defined in <linux/audit.h>.
- * @instruction_pointer: at the time of the system call.
- * @args: up to 6 system call arguments always stored as 64-bit values
- *        regardless of the architecture.
- */
-struct seccomp_data {
-	int nr;
-	__u32 arch;
-	__u64 instruction_pointer;
-	__u64 args[6];
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_SECCOMP
 
 #include <linux/thread_info.h>
@@ -129,5 +87,4 @@ static inline void get_seccomp_filter(struct task_struct *tsk)
 	return;
 }
 #endif /* CONFIG_SECCOMP_FILTER */
-#endif /* __KERNEL__ */
 #endif /* _LINUX_SECCOMP_H */
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
index 33406174cbe8..da1b33b33af7 100644
--- a/include/linux/securebits.h
+++ b/include/linux/securebits.h
@@ -1,54 +1,7 @@
 #ifndef _LINUX_SECUREBITS_H
 #define _LINUX_SECUREBITS_H 1
 
-/* Each securesetting is implemented using two bits. One bit specifies
-   whether the setting is on or off. The other bit specify whether the
-   setting is locked or not. A setting which is locked cannot be
-   changed from user-level. */
-#define issecure_mask(X)	(1 << (X))
-#ifdef __KERNEL__
-#define issecure(X)		(issecure_mask(X) & current_cred_xxx(securebits))
-#endif
-
-#define SECUREBITS_DEFAULT 0x00000000
-
-/* When set UID 0 has no special privileges. When unset, we support
-   inheritance of root-permissions and suid-root executable under
-   compatibility mode. We raise the effective and inheritable bitmasks
-   *of the executable file* if the effective uid of the new process is
-   0. If the real uid is 0, we raise the effective (legacy) bit of the
-   executable file. */
-#define SECURE_NOROOT			0
-#define SECURE_NOROOT_LOCKED		1  /* make bit-0 immutable */
-
-#define SECBIT_NOROOT		(issecure_mask(SECURE_NOROOT))
-#define SECBIT_NOROOT_LOCKED	(issecure_mask(SECURE_NOROOT_LOCKED))
-
-/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
-   When unset, to provide compatiblility with old programs relying on
-   set*uid to gain/lose privilege, transitions to/from uid 0 cause
-   capabilities to be gained/lost. */
-#define SECURE_NO_SETUID_FIXUP		2
-#define SECURE_NO_SETUID_FIXUP_LOCKED	3  /* make bit-2 immutable */
-
-#define SECBIT_NO_SETUID_FIXUP	(issecure_mask(SECURE_NO_SETUID_FIXUP))
-#define SECBIT_NO_SETUID_FIXUP_LOCKED \
-			(issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
-
-/* When set, a process can retain its capabilities even after
-   transitioning to a non-root user (the set-uid fixup suppressed by
-   bit 2). Bit-4 is cleared when a process calls exec(); setting both
-   bit 4 and 5 will create a barrier through exec that no exec()'d
-   child can use this feature again. */
-#define SECURE_KEEP_CAPS		4
-#define SECURE_KEEP_CAPS_LOCKED		5  /* make bit-4 immutable */
-
-#define SECBIT_KEEP_CAPS	(issecure_mask(SECURE_KEEP_CAPS))
-#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
-
-#define SECURE_ALL_BITS		(issecure_mask(SECURE_NOROOT) | \
-				 issecure_mask(SECURE_NO_SETUID_FIXUP) | \
-				 issecure_mask(SECURE_KEEP_CAPS))
-#define SECURE_ALL_LOCKS	(SECURE_ALL_BITS << 1)
+#include <uapi/linux/securebits.h>
 
+#define issecure(X)		(issecure_mask(X) & current_cred_xxx(securebits))
 #endif /* !_LINUX_SECUREBITS_H */
diff --git a/include/linux/selinux_netlink.h b/include/linux/selinux_netlink.h
deleted file mode 100644
index d239797785cf..000000000000
--- a/include/linux/selinux_netlink.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Netlink event notifications for SELinux.
- *
- * Author: James Morris <jmorris@redhat.com>
- *
- * Copyright (C) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2,
- * as published by the Free Software Foundation.
- */
-#ifndef _LINUX_SELINUX_NETLINK_H
-#define _LINUX_SELINUX_NETLINK_H
-
-#include <linux/types.h>
-
-/* Message types. */
-#define SELNL_MSG_BASE 0x10
-enum {
-	SELNL_MSG_SETENFORCE = SELNL_MSG_BASE,
-	SELNL_MSG_POLICYLOAD,
-	SELNL_MSG_MAX
-};
-
-#ifndef __KERNEL__
-/* Multicast groups - backwards compatiblility for userspace */
-#define SELNL_GRP_NONE		0x00000000
-#define SELNL_GRP_AVC		0x00000001	/* AVC notifications */
-#define SELNL_GRP_ALL		0xffffffff
-#endif
-
-enum selinux_nlgroups {
-	SELNLGRP_NONE,
-#define SELNLGRP_NONE	SELNLGRP_NONE
-	SELNLGRP_AVC,
-#define SELNLGRP_AVC	SELNLGRP_AVC
-	__SELNLGRP_MAX
-};
-#define SELNLGRP_MAX	(__SELNLGRP_MAX - 1)
-
-/* Message structures */
-struct selnl_msg_setenforce {
-	__s32		val;
-};
-
-struct selnl_msg_policyload {
-	__u32	seqno;
-};
-
-#endif /* _LINUX_SELINUX_NETLINK_H */
diff --git a/include/linux/sem.h b/include/linux/sem.h
index 10d6b226afc5..53d42650b193 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -1,85 +1,10 @@
 #ifndef _LINUX_SEM_H
 #define _LINUX_SEM_H
 
-#include <linux/ipc.h>
-
-/* semop flags */
-#define SEM_UNDO        0x1000  /* undo the operation on exit */
-
-/* semctl Command Definitions. */
-#define GETPID  11       /* get sempid */
-#define GETVAL  12       /* get semval */
-#define GETALL  13       /* get all semval's */
-#define GETNCNT 14       /* get semncnt */
-#define GETZCNT 15       /* get semzcnt */
-#define SETVAL  16       /* set semval */
-#define SETALL  17       /* set all semval's */
-
-/* ipcs ctl cmds */
-#define SEM_STAT 18
-#define SEM_INFO 19
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct semid_ds {
-	struct ipc_perm	sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	__kernel_time_t	sem_ctime;		/* last change time */
-	struct sem	*sem_base;		/* ptr to first semaphore in array */
-	struct sem_queue *sem_pending;		/* pending operations to be processed */
-	struct sem_queue **sem_pending_last;	/* last pending operation */
-	struct sem_undo	*undo;			/* undo requests on this array */
-	unsigned short	sem_nsems;		/* no. of semaphores in array */
-};
-
-/* Include the definition of semid64_ds */
-#include <asm/sembuf.h>
-
-/* semop system calls takes an array of these. */
-struct sembuf {
-	unsigned short  sem_num;	/* semaphore index in array */
-	short		sem_op;		/* semaphore operation */
-	short		sem_flg;	/* operation flags */
-};
-
-/* arg for semctl system calls. */
-union semun {
-	int val;			/* value for SETVAL */
-	struct semid_ds __user *buf;	/* buffer for IPC_STAT & IPC_SET */
-	unsigned short __user *array;	/* array for GETALL & SETALL */
-	struct seminfo __user *__buf;	/* buffer for IPC_INFO */
-	void __user *__pad;
-};
-
-struct  seminfo {
-	int semmap;
-	int semmni;
-	int semmns;
-	int semmnu;
-	int semmsl;
-	int semopm;
-	int semume;
-	int semusz;
-	int semvmx;
-	int semaem;
-};
-
-#define SEMMNI  128             /* <= IPCMNI  max # of semaphore identifiers */
-#define SEMMSL  250             /* <= 8 000 max num of semaphores per id */
-#define SEMMNS  (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
-#define SEMOPM  32	        /* <= 1 000 max num of ops per semop call */
-#define SEMVMX  32767           /* <= 32767 semaphore maximum value */
-#define SEMAEM  SEMVMX          /* adjust on exit max value */
-
-/* unused */
-#define SEMUME  SEMOPM          /* max num of undo entries per process */
-#define SEMMNU  SEMMNS          /* num of undo structures system wide */
-#define SEMMAP  SEMMNS          /* # of entries in semaphore map */
-#define SEMUSZ  20		/* sizeof struct sem_undo */
-
-#ifdef __KERNEL__
 #include <linux/atomic.h>
 #include <linux/rcupdate.h>
 #include <linux/cache.h>
+#include <uapi/linux/sem.h>
 
 struct task_struct;
 
@@ -122,6 +47,4 @@ static inline void exit_sem(struct task_struct *tsk)
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SEM_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 861e51de476b..0916107c77f9 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -6,16 +6,11 @@
  * Redistribution of this file is permitted under the terms of the GNU 
  * Public License (GPL)
  */
-
 #ifndef _LINUX_SERIAL_H
 #define _LINUX_SERIAL_H
 
-#include <linux/types.h>
-
-#include <linux/tty_flags.h>
-
-#ifdef __KERNEL__
 #include <asm/page.h>
+#include <uapi/linux/serial.h>
 
 
 /*
@@ -33,118 +28,6 @@ struct async_icount {
  */
 #define SERIAL_XMIT_SIZE PAGE_SIZE
 
-#endif
-
-struct serial_struct {
-	int	type;
-	int	line;
-	unsigned int	port;
-	int	irq;
-	int	flags;
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	baud_base;
-	unsigned short	close_delay;
-	char	io_type;
-	char	reserved_char[1];
-	int	hub6;
-	unsigned short	closing_wait; /* time to wait before closing */
-	unsigned short	closing_wait2; /* no longer used... */
-	unsigned char	*iomem_base;
-	unsigned short	iomem_reg_shift;
-	unsigned int	port_high;
-	unsigned long	iomap_base;	/* cookie passed into ioremap */
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output.  65535 means don't wait at all.
- */
-#define ASYNC_CLOSING_WAIT_INF	0
-#define ASYNC_CLOSING_WAIT_NONE	65535
-
-/*
- * These are the supported serial types.
- */
-#define PORT_UNKNOWN	0
-#define PORT_8250	1
-#define PORT_16450	2
-#define PORT_16550	3
-#define PORT_16550A	4
-#define PORT_CIRRUS     5	/* usurped by cyclades.c */
-#define PORT_16650	6
-#define PORT_16650V2	7
-#define PORT_16750	8
-#define PORT_STARTECH	9	/* usurped by cyclades.c */
-#define PORT_16C950	10	/* Oxford Semiconductor */
-#define PORT_16654	11
-#define PORT_16850	12
-#define PORT_RSA	13	/* RSA-DV II/S card */
-#define PORT_MAX	13
-
-#define SERIAL_IO_PORT	0
-#define SERIAL_IO_HUB6	1
-#define SERIAL_IO_MEM	2
-
-#define UART_CLEAR_FIFO		0x01
-#define UART_USE_FIFO		0x02
-#define UART_STARTECH		0x04
-#define UART_NATSEMI		0x08
-
-
-/*
- * Multiport serial configuration structure --- external structure
- */
-struct serial_multiport_struct {
-	int		irq;
-	int		port1;
-	unsigned char	mask1, match1;
-	int		port2;
-	unsigned char	mask2, match2;
-	int		port3;
-	unsigned char	mask3, match3;
-	int		port4;
-	unsigned char	mask4, match4;
-	int		port_monitor;
-	int	reserved[32];
-};
-
-/*
- * Serial input interrupt line counters -- external structure
- * Four lines can interrupt: CTS, DSR, RI, DCD
- */
-struct serial_icounter_struct {
-	int cts, dsr, rng, dcd;
-	int rx, tx;
-	int frame, overrun, parity, brk;
-	int buf_overrun;
-	int reserved[9];
-};
-
-/*
- * Serial interface for controlling RS485 settings on chips with suitable
- * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
- * platform. The set function returns the new state, with any unsupported bits
- * reverted appropriately.
- */
-
-struct serial_rs485 {
-	__u32	flags;			/* RS485 feature flags */
-#define SER_RS485_ENABLED		(1 << 0)	/* If enabled */
-#define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for
-							   RTS pin when
-							   sending */
-#define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for
-							   RTS pin after sent*/
-#define SER_RS485_RX_DURING_TX		(1 << 4)
-	__u32	delay_rts_before_send;	/* Delay before send (milliseconds) */
-	__u32	delay_rts_after_send;	/* Delay after send (milliseconds) */
-	__u32	padding[5];		/* Memory is cheap, new structs
-					   are a royal PITA .. */
-};
-
-#ifdef __KERNEL__
 #include <linux/compiler.h>
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_SERIAL_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f9b22ec7a9f3..3c430228d232 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -20,202 +20,6 @@
 #ifndef LINUX_SERIAL_CORE_H
 #define LINUX_SERIAL_CORE_H
 
-#include <linux/serial.h>
-
-/*
- * The type definitions.  These are from Ted Ts'o's serial.h
- */
-#define PORT_UNKNOWN	0
-#define PORT_8250	1
-#define PORT_16450	2
-#define PORT_16550	3
-#define PORT_16550A	4
-#define PORT_CIRRUS	5
-#define PORT_16650	6
-#define PORT_16650V2	7
-#define PORT_16750	8
-#define PORT_STARTECH	9
-#define PORT_16C950	10
-#define PORT_16654	11
-#define PORT_16850	12
-#define PORT_RSA	13
-#define PORT_NS16550A	14
-#define PORT_XSCALE	15
-#define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
-#define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
-#define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
-#define PORT_U6_16550A	19	/* ST-Ericsson U6xxx internal UART */
-#define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
-#define PORT_XR17D15X	21	/* Exar XR17D15x UART */
-#define PORT_LPC3220	22	/* NXP LPC32xx SoC "Standard" UART */
-#define PORT_8250_CIR	23	/* CIR infrared port, has its own driver */
-#define PORT_MAX_8250	23	/* max port ID */
-
-/*
- * ARM specific type numbers.  These are not currently guaranteed
- * to be implemented, and will change in the future.  These are
- * separate so any additions to the old serial.c that occur before
- * we are merged can be easily merged here.
- */
-#define PORT_PXA	31
-#define PORT_AMBA	32
-#define PORT_CLPS711X	33
-#define PORT_SA1100	34
-#define PORT_UART00	35
-#define PORT_21285	37
-
-/* Sparc type numbers.  */
-#define PORT_SUNZILOG	38
-#define PORT_SUNSAB	39
-
-/* DEC */
-#define PORT_DZ		46
-#define PORT_ZS		47
-
-/* Parisc type numbers. */
-#define PORT_MUX	48
-
-/* Atmel AT91 / AT32 SoC */
-#define PORT_ATMEL	49
-
-/* Macintosh Zilog type numbers */
-#define PORT_MAC_ZILOG	50	/* m68k : not yet implemented */
-#define PORT_PMAC_ZILOG	51
-
-/* SH-SCI */
-#define PORT_SCI	52
-#define PORT_SCIF	53
-#define PORT_IRDA	54
-
-/* Samsung S3C2410 SoC and derivatives thereof */
-#define PORT_S3C2410    55
-
-/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
-#define PORT_IP22ZILOG	56
-
-/* Sharp LH7a40x -- an ARM9 SoC series */
-#define PORT_LH7A40X	57
-
-/* PPC CPM type number */
-#define PORT_CPM        58
-
-/* MPC52xx (and MPC512x) type numbers */
-#define PORT_MPC52xx	59
-
-/* IBM icom */
-#define PORT_ICOM	60
-
-/* Samsung S3C2440 SoC */
-#define PORT_S3C2440	61
-
-/* Motorola i.MX SoC */
-#define PORT_IMX	62
-
-/* Marvell MPSC */
-#define PORT_MPSC	63
-
-/* TXX9 type number */
-#define PORT_TXX9	64
-
-/* NEC VR4100 series SIU/DSIU */
-#define PORT_VR41XX_SIU		65
-#define PORT_VR41XX_DSIU	66
-
-/* Samsung S3C2400 SoC */
-#define PORT_S3C2400	67
-
-/* M32R SIO */
-#define PORT_M32R_SIO	68
-
-/*Digi jsm */
-#define PORT_JSM        69
-
-#define PORT_PNX8XXX	70
-
-/* Hilscher netx */
-#define PORT_NETX	71
-
-/* SUN4V Hypervisor Console */
-#define PORT_SUNHV	72
-
-#define PORT_S3C2412	73
-
-/* Xilinx uartlite */
-#define PORT_UARTLITE	74
-
-/* Blackfin bf5xx */
-#define PORT_BFIN	75
-
-/* Micrel KS8695 */
-#define PORT_KS8695	76
-
-/* Broadcom SB1250, etc. SOC */
-#define PORT_SB1250_DUART	77
-
-/* Freescale ColdFire */
-#define PORT_MCF	78
-
-/* Blackfin SPORT */
-#define PORT_BFIN_SPORT		79
-
-/* MN10300 on-chip UART numbers */
-#define PORT_MN10300		80
-#define PORT_MN10300_CTS	81
-
-#define PORT_SC26XX	82
-
-/* SH-SCI */
-#define PORT_SCIFA	83
-
-#define PORT_S3C6400	84
-
-/* NWPSERIAL */
-#define PORT_NWPSERIAL	85
-
-/* MAX3100 */
-#define PORT_MAX3100    86
-
-/* Timberdale UART */
-#define PORT_TIMBUART	87
-
-/* Qualcomm MSM SoCs */
-#define PORT_MSM	88
-
-/* BCM63xx family SoCs */
-#define PORT_BCM63XX	89
-
-/* Aeroflex Gaisler GRLIB APBUART */
-#define PORT_APBUART    90
-
-/* Altera UARTs */
-#define PORT_ALTERA_JTAGUART	91
-#define PORT_ALTERA_UART	92
-
-/* SH-SCI */
-#define PORT_SCIFB	93
-
-/* MAX310X */
-#define PORT_MAX310X	94
-
-/* High Speed UART for Medfield */
-#define PORT_MFD	95
-
-/* TI OMAP-UART */
-#define PORT_OMAP	96
-
-/* VIA VT8500 SoC */
-#define PORT_VT8500	97
-
-/* Xilinx PSS UART */
-#define PORT_XUARTPS	98
-
-/* Atheros AR933X SoC */
-#define PORT_AR933X	99
-
-/* Energy Micro efm32 SoC */
-#define PORT_EFMUART   100
-
-#ifdef __KERNEL__
 
 #include <linux/compiler.h>
 #include <linux/interrupt.h>
@@ -226,6 +30,7 @@
 #include <linux/mutex.h>
 #include <linux/sysrq.h>
 #include <linux/pps_kernel.h>
+#include <uapi/linux/serial_core.h>
 
 struct uart_port;
 struct serial_struct;
@@ -562,6 +367,4 @@ static inline int uart_handle_break(struct uart_port *port)
 					 (cflag) & CRTSCTS || \
 					 !((cflag) & CLOCAL))
 
-#endif
-
 #endif /* LINUX_SERIAL_CORE_H */
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
deleted file mode 100644
index 5ed325e88a81..000000000000
--- a/include/linux/serial_reg.h
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * include/linux/serial_reg.h
- *
- * Copyright (C) 1992, 1994 by Theodore Ts'o.
- * 
- * Redistribution of this file is permitted under the terms of the GNU 
- * Public License (GPL)
- * 
- * These are the UART port assignments, expressed as offsets from the base
- * register.  These assignments should hold for any serial port based on
- * a 8250, 16450, or 16550(A).
- */
-
-#ifndef _LINUX_SERIAL_REG_H
-#define _LINUX_SERIAL_REG_H
-
-/*
- * DLAB=0
- */
-#define UART_RX		0	/* In:  Receive buffer */
-#define UART_TX		0	/* Out: Transmit buffer */
-
-#define UART_IER	1	/* Out: Interrupt Enable Register */
-#define UART_IER_MSI		0x08 /* Enable Modem status interrupt */
-#define UART_IER_RLSI		0x04 /* Enable receiver line status interrupt */
-#define UART_IER_THRI		0x02 /* Enable Transmitter holding register int. */
-#define UART_IER_RDI		0x01 /* Enable receiver data interrupt */
-/*
- * Sleep mode for ST16650 and TI16750.  For the ST16650, EFR[4]=1
- */
-#define UART_IERX_SLEEP		0x10 /* Enable sleep mode */
-
-#define UART_IIR	2	/* In:  Interrupt ID Register */
-#define UART_IIR_NO_INT		0x01 /* No interrupts pending */
-#define UART_IIR_ID		0x06 /* Mask for the interrupt ID */
-#define UART_IIR_MSI		0x00 /* Modem status interrupt */
-#define UART_IIR_THRI		0x02 /* Transmitter holding register empty */
-#define UART_IIR_RDI		0x04 /* Receiver data interrupt */
-#define UART_IIR_RLSI		0x06 /* Receiver line status interrupt */
-
-#define UART_IIR_BUSY		0x07 /* DesignWare APB Busy Detect */
-
-#define UART_IIR_RX_TIMEOUT	0x0c /* OMAP RX Timeout interrupt */
-#define UART_IIR_XOFF		0x10 /* OMAP XOFF/Special Character */
-#define UART_IIR_CTS_RTS_DSR	0x20 /* OMAP CTS/RTS/DSR Change */
-
-#define UART_FCR	2	/* Out: FIFO Control Register */
-#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
-#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
-#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
-#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
-/*
- * Note: The FIFO trigger levels are chip specific:
- *	RX:76 = 00  01  10  11	TX:54 = 00  01  10  11
- * PC16550D:	 1   4   8  14		xx  xx  xx  xx
- * TI16C550A:	 1   4   8  14          xx  xx  xx  xx
- * TI16C550C:	 1   4   8  14          xx  xx  xx  xx
- * ST16C550:	 1   4   8  14		xx  xx  xx  xx
- * ST16C650:	 8  16  24  28		16   8  24  30	PORT_16650V2
- * NS16C552:	 1   4   8  14		xx  xx  xx  xx
- * ST16C654:	 8  16  56  60		 8  16  32  56	PORT_16654
- * TI16C750:	 1  16  32  56		xx  xx  xx  xx	PORT_16750
- * TI16C752:	 8  16  56  60		 8  16  32  56
- * Tegra:	 1   4   8  14		16   8   4   1	PORT_TEGRA
- */
-#define UART_FCR_R_TRIG_00	0x00
-#define UART_FCR_R_TRIG_01	0x40
-#define UART_FCR_R_TRIG_10	0x80
-#define UART_FCR_R_TRIG_11	0xc0
-#define UART_FCR_T_TRIG_00	0x00
-#define UART_FCR_T_TRIG_01	0x10
-#define UART_FCR_T_TRIG_10	0x20
-#define UART_FCR_T_TRIG_11	0x30
-
-#define UART_FCR_TRIGGER_MASK	0xC0 /* Mask for the FIFO trigger range */
-#define UART_FCR_TRIGGER_1	0x00 /* Mask for trigger set at 1 */
-#define UART_FCR_TRIGGER_4	0x40 /* Mask for trigger set at 4 */
-#define UART_FCR_TRIGGER_8	0x80 /* Mask for trigger set at 8 */
-#define UART_FCR_TRIGGER_14	0xC0 /* Mask for trigger set at 14 */
-/* 16650 definitions */
-#define UART_FCR6_R_TRIGGER_8	0x00 /* Mask for receive trigger set at 1 */
-#define UART_FCR6_R_TRIGGER_16	0x40 /* Mask for receive trigger set at 4 */
-#define UART_FCR6_R_TRIGGER_24  0x80 /* Mask for receive trigger set at 8 */
-#define UART_FCR6_R_TRIGGER_28	0xC0 /* Mask for receive trigger set at 14 */
-#define UART_FCR6_T_TRIGGER_16	0x00 /* Mask for transmit trigger set at 16 */
-#define UART_FCR6_T_TRIGGER_8	0x10 /* Mask for transmit trigger set at 8 */
-#define UART_FCR6_T_TRIGGER_24  0x20 /* Mask for transmit trigger set at 24 */
-#define UART_FCR6_T_TRIGGER_30	0x30 /* Mask for transmit trigger set at 30 */
-#define UART_FCR7_64BYTE	0x20 /* Go into 64 byte mode (TI16C750) */
-
-#define UART_LCR	3	/* Out: Line Control Register */
-/*
- * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting 
- * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
- */
-#define UART_LCR_DLAB		0x80 /* Divisor latch access bit */
-#define UART_LCR_SBC		0x40 /* Set break control */
-#define UART_LCR_SPAR		0x20 /* Stick parity (?) */
-#define UART_LCR_EPAR		0x10 /* Even parity select */
-#define UART_LCR_PARITY		0x08 /* Parity Enable */
-#define UART_LCR_STOP		0x04 /* Stop bits: 0=1 bit, 1=2 bits */
-#define UART_LCR_WLEN5		0x00 /* Wordlength: 5 bits */
-#define UART_LCR_WLEN6		0x01 /* Wordlength: 6 bits */
-#define UART_LCR_WLEN7		0x02 /* Wordlength: 7 bits */
-#define UART_LCR_WLEN8		0x03 /* Wordlength: 8 bits */
-
-/*
- * Access to some registers depends on register access / configuration
- * mode.
- */
-#define UART_LCR_CONF_MODE_A	UART_LCR_DLAB	/* Configutation mode A */
-#define UART_LCR_CONF_MODE_B	0xBF		/* Configutation mode B */
-
-#define UART_MCR	4	/* Out: Modem Control Register */
-#define UART_MCR_CLKSEL		0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
-#define UART_MCR_TCRTLR		0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
-#define UART_MCR_XONANY		0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
-#define UART_MCR_AFE		0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
-#define UART_MCR_LOOP		0x10 /* Enable loopback test mode */
-#define UART_MCR_OUT2		0x08 /* Out2 complement */
-#define UART_MCR_OUT1		0x04 /* Out1 complement */
-#define UART_MCR_RTS		0x02 /* RTS complement */
-#define UART_MCR_DTR		0x01 /* DTR complement */
-
-#define UART_LSR	5	/* In:  Line Status Register */
-#define UART_LSR_FIFOE		0x80 /* Fifo error */
-#define UART_LSR_TEMT		0x40 /* Transmitter empty */
-#define UART_LSR_THRE		0x20 /* Transmit-hold-register empty */
-#define UART_LSR_BI		0x10 /* Break interrupt indicator */
-#define UART_LSR_FE		0x08 /* Frame error indicator */
-#define UART_LSR_PE		0x04 /* Parity error indicator */
-#define UART_LSR_OE		0x02 /* Overrun error indicator */
-#define UART_LSR_DR		0x01 /* Receiver data ready */
-#define UART_LSR_BRK_ERROR_BITS	0x1E /* BI, FE, PE, OE bits */
-
-#define UART_MSR	6	/* In:  Modem Status Register */
-#define UART_MSR_DCD		0x80 /* Data Carrier Detect */
-#define UART_MSR_RI		0x40 /* Ring Indicator */
-#define UART_MSR_DSR		0x20 /* Data Set Ready */
-#define UART_MSR_CTS		0x10 /* Clear to Send */
-#define UART_MSR_DDCD		0x08 /* Delta DCD */
-#define UART_MSR_TERI		0x04 /* Trailing edge ring indicator */
-#define UART_MSR_DDSR		0x02 /* Delta DSR */
-#define UART_MSR_DCTS		0x01 /* Delta CTS */
-#define UART_MSR_ANY_DELTA	0x0F /* Any of the delta bits! */
-
-#define UART_SCR	7	/* I/O: Scratch Register */
-
-/*
- * DLAB=1
- */
-#define UART_DLL	0	/* Out: Divisor Latch Low */
-#define UART_DLM	1	/* Out: Divisor Latch High */
-
-/*
- * LCR=0xBF (or DLAB=1 for 16C660)
- */
-#define UART_EFR	2	/* I/O: Extended Features Register */
-#define UART_XR_EFR	9	/* I/O: Extended Features Register (XR17D15x) */
-#define UART_EFR_CTS		0x80 /* CTS flow control */
-#define UART_EFR_RTS		0x40 /* RTS flow control */
-#define UART_EFR_SCD		0x20 /* Special character detect */
-#define UART_EFR_ECB		0x10 /* Enhanced control bit */
-/*
- * the low four bits control software flow control
- */
-
-/*
- * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
- */
-#define UART_XON1	4	/* I/O: Xon character 1 */
-#define UART_XON2	5	/* I/O: Xon character 2 */
-#define UART_XOFF1	6	/* I/O: Xoff character 1 */
-#define UART_XOFF2	7	/* I/O: Xoff character 2 */
-
-/*
- * EFR[4]=1 MCR[6]=1, TI16C752
- */
-#define UART_TI752_TCR	6	/* I/O: transmission control register */
-#define UART_TI752_TLR	7	/* I/O: trigger level register */
-
-/*
- * LCR=0xBF, XR16C85x
- */
-#define UART_TRG	0	/* FCTR bit 7 selects Rx or Tx
-				 * In: Fifo count
-				 * Out: Fifo custom trigger levels */
-/*
- * These are the definitions for the Programmable Trigger Register
- */
-#define UART_TRG_1		0x01
-#define UART_TRG_4		0x04
-#define UART_TRG_8		0x08
-#define UART_TRG_16		0x10
-#define UART_TRG_32		0x20
-#define UART_TRG_64		0x40
-#define UART_TRG_96		0x60
-#define UART_TRG_120		0x78
-#define UART_TRG_128		0x80
-
-#define UART_FCTR	1	/* Feature Control Register */
-#define UART_FCTR_RTS_NODELAY	0x00  /* RTS flow control delay */
-#define UART_FCTR_RTS_4DELAY	0x01
-#define UART_FCTR_RTS_6DELAY	0x02
-#define UART_FCTR_RTS_8DELAY	0x03
-#define UART_FCTR_IRDA		0x04  /* IrDa data encode select */
-#define UART_FCTR_TX_INT	0x08  /* Tx interrupt type select */
-#define UART_FCTR_TRGA		0x00  /* Tx/Rx 550 trigger table select */
-#define UART_FCTR_TRGB		0x10  /* Tx/Rx 650 trigger table select */
-#define UART_FCTR_TRGC		0x20  /* Tx/Rx 654 trigger table select */
-#define UART_FCTR_TRGD		0x30  /* Tx/Rx 850 programmable trigger select */
-#define UART_FCTR_SCR_SWAP	0x40  /* Scratch pad register swap */
-#define UART_FCTR_RX		0x00  /* Programmable trigger mode select */
-#define UART_FCTR_TX		0x80  /* Programmable trigger mode select */
-
-/*
- * LCR=0xBF, FCTR[6]=1
- */
-#define UART_EMSR	7	/* Extended Mode Select Register */
-#define UART_EMSR_FIFO_COUNT	0x01  /* Rx/Tx select */
-#define UART_EMSR_ALT_COUNT	0x02  /* Alternating count select */
-
-/*
- * The Intel XScale on-chip UARTs define these bits
- */
-#define UART_IER_DMAE	0x80	/* DMA Requests Enable */
-#define UART_IER_UUE	0x40	/* UART Unit Enable */
-#define UART_IER_NRZE	0x20	/* NRZ coding Enable */
-#define UART_IER_RTOIE	0x10	/* Receiver Time Out Interrupt Enable */
-
-#define UART_IIR_TOD	0x08	/* Character Timeout Indication Detected */
-
-#define UART_FCR_PXAR1	0x00	/* receive FIFO threshold = 1 */
-#define UART_FCR_PXAR8	0x40	/* receive FIFO threshold = 8 */
-#define UART_FCR_PXAR16	0x80	/* receive FIFO threshold = 16 */
-#define UART_FCR_PXAR32	0xc0	/* receive FIFO threshold = 32 */
-
-/*
- * Intel MID on-chip HSU (High Speed UART) defined bits
- */
-#define UART_FCR_HSU_64_1B	0x00	/* receive FIFO treshold = 1 */
-#define UART_FCR_HSU_64_16B	0x40	/* receive FIFO treshold = 16 */
-#define UART_FCR_HSU_64_32B	0x80	/* receive FIFO treshold = 32 */
-#define UART_FCR_HSU_64_56B	0xc0	/* receive FIFO treshold = 56 */
-
-#define UART_FCR_HSU_16_1B	0x00	/* receive FIFO treshold = 1 */
-#define UART_FCR_HSU_16_4B	0x40	/* receive FIFO treshold = 4 */
-#define UART_FCR_HSU_16_8B	0x80	/* receive FIFO treshold = 8 */
-#define UART_FCR_HSU_16_14B	0xc0	/* receive FIFO treshold = 14 */
-
-#define UART_FCR_HSU_64B_FIFO	0x20	/* chose 64 bytes FIFO */
-#define UART_FCR_HSU_16B_FIFO	0x00	/* chose 16 bytes FIFO */
-
-#define UART_FCR_HALF_EMPT_TXI	0x00	/* trigger TX_EMPT IRQ for half empty */
-#define UART_FCR_FULL_EMPT_TXI	0x08	/* trigger TX_EMPT IRQ for full empty */
-
-/*
- * These register definitions are for the 16C950
- */
-#define UART_ASR	0x01	/* Additional Status Register */
-#define UART_RFL	0x03	/* Receiver FIFO level */
-#define UART_TFL 	0x04	/* Transmitter FIFO level */
-#define UART_ICR	0x05	/* Index Control Register */
-
-/* The 16950 ICR registers */
-#define UART_ACR	0x00	/* Additional Control Register */
-#define UART_CPR	0x01	/* Clock Prescalar Register */
-#define UART_TCR	0x02	/* Times Clock Register */
-#define UART_CKS	0x03	/* Clock Select Register */
-#define UART_TTL	0x04	/* Transmitter Interrupt Trigger Level */
-#define UART_RTL	0x05	/* Receiver Interrupt Trigger Level */
-#define UART_FCL	0x06	/* Flow Control Level Lower */
-#define UART_FCH	0x07	/* Flow Control Level Higher */
-#define UART_ID1	0x08	/* ID #1 */
-#define UART_ID2	0x09	/* ID #2 */
-#define UART_ID3	0x0A	/* ID #3 */
-#define UART_REV	0x0B	/* Revision */
-#define UART_CSR	0x0C	/* Channel Software Reset */
-#define UART_NMR	0x0D	/* Nine-bit Mode Register */
-#define UART_CTR	0xFF
-
-/*
- * The 16C950 Additional Control Register
- */
-#define UART_ACR_RXDIS	0x01	/* Receiver disable */
-#define UART_ACR_TXDIS	0x02	/* Transmitter disable */
-#define UART_ACR_DSRFC	0x04	/* DSR Flow Control */
-#define UART_ACR_TLENB	0x20	/* 950 trigger levels enable */
-#define UART_ACR_ICRRD	0x40	/* ICR Read enable */
-#define UART_ACR_ASREN	0x80	/* Additional status enable */
-
-
-
-/*
- * These definitions are for the RSA-DV II/S card, from
- *
- * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
- */
-
-#define UART_RSA_BASE (-8)
-
-#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
-
-#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
-#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
-#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
-#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
-
-#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
-
-#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
-#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
-#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
-#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
-#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
-
-#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
-
-#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
-#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
-#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
-#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
-#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
-#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
-#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
-#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
-
-#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
-
-#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
-
-#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
-
-#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
-
-/*
- * The RSA DSV/II board has two fixed clock frequencies.  One is the
- * standard rate, and the other is 8 times faster.
- */
-#define SERIAL_RSA_BAUD_BASE (921600)
-#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
-
-/*
- * Extra serial register definitions for the internal UARTs
- * in TI OMAP processors.
- */
-#define UART_OMAP_MDR1		0x08	/* Mode definition register */
-#define UART_OMAP_MDR2		0x09	/* Mode definition register 2 */
-#define UART_OMAP_SCR		0x10	/* Supplementary control register */
-#define UART_OMAP_SSR		0x11	/* Supplementary status register */
-#define UART_OMAP_EBLR		0x12	/* BOF length register */
-#define UART_OMAP_OSC_12M_SEL	0x13	/* OMAP1510 12MHz osc select */
-#define UART_OMAP_MVER		0x14	/* Module version register */
-#define UART_OMAP_SYSC		0x15	/* System configuration register */
-#define UART_OMAP_SYSS		0x16	/* System status register */
-#define UART_OMAP_WER		0x17	/* Wake-up enable register */
-
-/*
- * These are the definitions for the MDR1 register
- */
-#define UART_OMAP_MDR1_16X_MODE		0x00	/* UART 16x mode */
-#define UART_OMAP_MDR1_SIR_MODE		0x01	/* SIR mode */
-#define UART_OMAP_MDR1_16X_ABAUD_MODE	0x02	/* UART 16x auto-baud */
-#define UART_OMAP_MDR1_13X_MODE		0x03	/* UART 13x mode */
-#define UART_OMAP_MDR1_MIR_MODE		0x04	/* MIR mode */
-#define UART_OMAP_MDR1_FIR_MODE		0x05	/* FIR mode */
-#define UART_OMAP_MDR1_CIR_MODE		0x06	/* CIR mode */
-#define UART_OMAP_MDR1_DISABLE		0x07	/* Disable (default state) */
-
-#endif /* _LINUX_SERIAL_REG_H */
-
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 6d6cfd3e94a3..36aac733840a 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -1,6 +1,3 @@
-#ifndef _SERIO_H
-#define _SERIO_H
-
 /*
  * Copyright (C) 1999-2002 Vojtech Pavlik
 *
@@ -8,12 +5,9 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
+#ifndef _SERIO_H
+#define _SERIO_H
 
-#include <linux/ioctl.h>
-
-#define SPIOCSTYPE	_IOW('q', 0x01, unsigned long)
-
-#ifdef __KERNEL__
 
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -22,6 +16,7 @@
 #include <linux/mutex.h>
 #include <linux/device.h>
 #include <linux/mod_devicetable.h>
+#include <uapi/linux/serio.h>
 
 struct serio {
 	void *port_data;
@@ -152,68 +147,3 @@ static inline void serio_continue_rx(struct serio *serio)
 }
 
 #endif
-
-/*
- * bit masks for use in "interrupt" flags (3rd argument)
- */
-#define SERIO_TIMEOUT	1
-#define SERIO_PARITY	2
-#define SERIO_FRAME	4
-
-/*
- * Serio types
- */
-#define SERIO_XT	0x00
-#define SERIO_8042	0x01
-#define SERIO_RS232	0x02
-#define SERIO_HIL_MLC	0x03
-#define SERIO_PS_PSTHRU	0x05
-#define SERIO_8042_XL	0x06
-
-/*
- * Serio protocols
- */
-#define SERIO_UNKNOWN	0x00
-#define SERIO_MSC	0x01
-#define SERIO_SUN	0x02
-#define SERIO_MS	0x03
-#define SERIO_MP	0x04
-#define SERIO_MZ	0x05
-#define SERIO_MZP	0x06
-#define SERIO_MZPP	0x07
-#define SERIO_VSXXXAA	0x08
-#define SERIO_SUNKBD	0x10
-#define SERIO_WARRIOR	0x18
-#define SERIO_SPACEORB	0x19
-#define SERIO_MAGELLAN	0x1a
-#define SERIO_SPACEBALL	0x1b
-#define SERIO_GUNZE	0x1c
-#define SERIO_IFORCE	0x1d
-#define SERIO_STINGER	0x1e
-#define SERIO_NEWTON	0x1f
-#define SERIO_STOWAWAY	0x20
-#define SERIO_H3600	0x21
-#define SERIO_PS2SER	0x22
-#define SERIO_TWIDKBD	0x23
-#define SERIO_TWIDJOY	0x24
-#define SERIO_HIL	0x25
-#define SERIO_SNES232	0x26
-#define SERIO_SEMTECH	0x27
-#define SERIO_LKKBD	0x28
-#define SERIO_ELO	0x29
-#define SERIO_MICROTOUCH	0x30
-#define SERIO_PENMOUNT	0x31
-#define SERIO_TOUCHRIGHT	0x32
-#define SERIO_TOUCHWIN	0x33
-#define SERIO_TAOSEVM	0x34
-#define SERIO_FUJITSU	0x35
-#define SERIO_ZHENHUA	0x36
-#define SERIO_INEXIO	0x37
-#define SERIO_TOUCHIT213	0x38
-#define SERIO_W8001	0x39
-#define SERIO_DYNAPRO	0x3a
-#define SERIO_HAMPSHIRE	0x3b
-#define SERIO_PS2MULT	0x3c
-#define SERIO_TSC40	0x3d
-
-#endif
diff --git a/include/linux/shm.h b/include/linux/shm.h
index edd086883ccb..bcf8a6a3ec00 100644
--- a/include/linux/shm.h
+++ b/include/linux/shm.h
@@ -1,88 +1,11 @@
 #ifndef _LINUX_SHM_H_
 #define _LINUX_SHM_H_
 
-#include <linux/ipc.h>
-#include <linux/errno.h>
-#ifdef __KERNEL__
 #include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
-
-/*
- * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
- * be increased by sysctl
- */
+#include <uapi/linux/shm.h>
 
-#define SHMMAX 0x2000000		 /* max shared seg size (bytes) */
-#define SHMMIN 1			 /* min shared seg size (bytes) */
-#define SHMMNI 4096			 /* max num of segs system wide */
-#ifdef __KERNEL__
 #define SHMALL (SHMMAX/PAGE_SIZE*(SHMMNI/16)) /* max shm system wide (pages) */
-#else
-#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16))
-#endif
-#define SHMSEG SHMMNI			 /* max shared segs per process */
-
-#ifdef __KERNEL__
 #include <asm/shmparam.h>
-#endif
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct shmid_ds {
-	struct ipc_perm		shm_perm;	/* operation perms */
-	int			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	__kernel_time_t		shm_ctime;	/* last change time */
-	__kernel_ipc_pid_t	shm_cpid;	/* pid of creator */
-	__kernel_ipc_pid_t	shm_lpid;	/* pid of last operator */
-	unsigned short		shm_nattch;	/* no. of current attaches */
-	unsigned short 		shm_unused;	/* compatibility */
-	void 			*shm_unused2;	/* ditto - used by DIPC */
-	void			*shm_unused3;	/* unused */
-};
-
-/* Include the definition of shmid64_ds and shminfo64 */
-#include <asm/shmbuf.h>
-
-/* permission flag for shmget */
-#define SHM_R		0400	/* or S_IRUGO from <linux/stat.h> */
-#define SHM_W		0200	/* or S_IWUGO from <linux/stat.h> */
-
-/* mode for attach */
-#define	SHM_RDONLY	010000	/* read-only access */
-#define	SHM_RND		020000	/* round attach address to SHMLBA boundary */
-#define	SHM_REMAP	040000	/* take-over region on attach */
-#define	SHM_EXEC	0100000	/* execution access */
-
-/* super user shmctl commands */
-#define SHM_LOCK 	11
-#define SHM_UNLOCK 	12
-
-/* ipcs ctl commands */
-#define SHM_STAT 	13
-#define SHM_INFO 	14
-
-/* Obsolete, used only for backwards compatibility */
-struct	shminfo {
-	int shmmax;
-	int shmmin;
-	int shmmni;
-	int shmseg;
-	int shmall;
-};
-
-struct shm_info {
-	int used_ids;
-	unsigned long shm_tot;	/* total allocated shm */
-	unsigned long shm_rss;	/* total resident shm */
-	unsigned long shm_swp;	/* total swapped shm */
-	unsigned long swap_attempts;
-	unsigned long swap_successes;
-};
-
-#ifdef __KERNEL__
 struct shmid_kernel /* private to the kernel */
 {	
 	struct kern_ipc_perm	shm_perm;
@@ -127,6 +50,4 @@ static inline void exit_shm(struct task_struct *task)
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SHM_H_ */
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 26b424adc842..e19a011b43b7 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -1,11 +1,8 @@
 #ifndef _LINUX_SIGNAL_H
 #define _LINUX_SIGNAL_H
 
-#include <asm/signal.h>
-#include <asm/siginfo.h>
-
-#ifdef __KERNEL__
 #include <linux/list.h>
+#include <uapi/linux/signal.h>
 
 struct task_struct;
 
@@ -388,6 +385,4 @@ int unhandled_signal(struct task_struct *tsk, int sig);
 
 void signals_init(void);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SIGNAL_H */
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index 247399b2979a..eadbe227c256 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h
@@ -4,51 +4,11 @@
  *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
  *
  */
-
 #ifndef _LINUX_SIGNALFD_H
 #define _LINUX_SIGNALFD_H
 
-#include <linux/types.h>
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
-
-/* Flags for signalfd4.  */
-#define SFD_CLOEXEC O_CLOEXEC
-#define SFD_NONBLOCK O_NONBLOCK
-
-struct signalfd_siginfo {
-	__u32 ssi_signo;
-	__s32 ssi_errno;
-	__s32 ssi_code;
-	__u32 ssi_pid;
-	__u32 ssi_uid;
-	__s32 ssi_fd;
-	__u32 ssi_tid;
-	__u32 ssi_band;
-	__u32 ssi_overrun;
-	__u32 ssi_trapno;
-	__s32 ssi_status;
-	__s32 ssi_int;
-	__u64 ssi_ptr;
-	__u64 ssi_utime;
-	__u64 ssi_stime;
-	__u64 ssi_addr;
-	__u16 ssi_addr_lsb;
+#include <uapi/linux/signalfd.h>
 
-	/*
-	 * Pad strcture to 128 bytes. Remember to update the
-	 * pad size when you add new members. We use a fixed
-	 * size structure to avoid compatibility problems with
-	 * future versions, and we leave extra space for additional
-	 * members. We use fixed size members because this strcture
-	 * comes out of a read(2) and we really don't want to have
-	 * a compat on read(2).
-	 */
-	__u8 __pad[46];
-};
-
-
-#ifdef __KERNEL__
 
 #ifdef CONFIG_SIGNALFD
 
@@ -71,6 +31,4 @@ static inline void signalfd_cleanup(struct sighand_struct *sighand) { }
 
 #endif /* CONFIG_SIGNALFD */
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SIGNALFD_H */
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
deleted file mode 100644
index fdfba235f9f1..000000000000
--- a/include/linux/snmp.h
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Definitions for MIBs
- *
- * Author: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
- */
-
-#ifndef _LINUX_SNMP_H
-#define _LINUX_SNMP_H
-
-/* ipstats mib definitions */
-/*
- * RFC 1213:  MIB-II
- * RFC 2011 (updates 1213):  SNMPv2-MIB-IP
- * RFC 2863:  Interfaces Group MIB
- * RFC 2465:  IPv6 MIB: General Group
- * draft-ietf-ipv6-rfc2011-update-10.txt: MIB for IP: IP Statistics Tables
- */
-enum
-{
-	IPSTATS_MIB_NUM = 0,
-/* frequently written fields in fast path, kept in same cache line */
-	IPSTATS_MIB_INPKTS,			/* InReceives */
-	IPSTATS_MIB_INOCTETS,			/* InOctets */
-	IPSTATS_MIB_INDELIVERS,			/* InDelivers */
-	IPSTATS_MIB_OUTFORWDATAGRAMS,		/* OutForwDatagrams */
-	IPSTATS_MIB_OUTPKTS,			/* OutRequests */
-	IPSTATS_MIB_OUTOCTETS,			/* OutOctets */
-/* other fields */
-	IPSTATS_MIB_INHDRERRORS,		/* InHdrErrors */
-	IPSTATS_MIB_INTOOBIGERRORS,		/* InTooBigErrors */
-	IPSTATS_MIB_INNOROUTES,			/* InNoRoutes */
-	IPSTATS_MIB_INADDRERRORS,		/* InAddrErrors */
-	IPSTATS_MIB_INUNKNOWNPROTOS,		/* InUnknownProtos */
-	IPSTATS_MIB_INTRUNCATEDPKTS,		/* InTruncatedPkts */
-	IPSTATS_MIB_INDISCARDS,			/* InDiscards */
-	IPSTATS_MIB_OUTDISCARDS,		/* OutDiscards */
-	IPSTATS_MIB_OUTNOROUTES,		/* OutNoRoutes */
-	IPSTATS_MIB_REASMTIMEOUT,		/* ReasmTimeout */
-	IPSTATS_MIB_REASMREQDS,			/* ReasmReqds */
-	IPSTATS_MIB_REASMOKS,			/* ReasmOKs */
-	IPSTATS_MIB_REASMFAILS,			/* ReasmFails */
-	IPSTATS_MIB_FRAGOKS,			/* FragOKs */
-	IPSTATS_MIB_FRAGFAILS,			/* FragFails */
-	IPSTATS_MIB_FRAGCREATES,		/* FragCreates */
-	IPSTATS_MIB_INMCASTPKTS,		/* InMcastPkts */
-	IPSTATS_MIB_OUTMCASTPKTS,		/* OutMcastPkts */
-	IPSTATS_MIB_INBCASTPKTS,		/* InBcastPkts */
-	IPSTATS_MIB_OUTBCASTPKTS,		/* OutBcastPkts */
-	IPSTATS_MIB_INMCASTOCTETS,		/* InMcastOctets */
-	IPSTATS_MIB_OUTMCASTOCTETS,		/* OutMcastOctets */
-	IPSTATS_MIB_INBCASTOCTETS,		/* InBcastOctets */
-	IPSTATS_MIB_OUTBCASTOCTETS,		/* OutBcastOctets */
-	__IPSTATS_MIB_MAX
-};
-
-/* icmp mib definitions */
-/*
- * RFC 1213:  MIB-II ICMP Group
- * RFC 2011 (updates 1213):  SNMPv2 MIB for IP: ICMP group
- */
-enum
-{
-	ICMP_MIB_NUM = 0,
-	ICMP_MIB_INMSGS,			/* InMsgs */
-	ICMP_MIB_INERRORS,			/* InErrors */
-	ICMP_MIB_INDESTUNREACHS,		/* InDestUnreachs */
-	ICMP_MIB_INTIMEEXCDS,			/* InTimeExcds */
-	ICMP_MIB_INPARMPROBS,			/* InParmProbs */
-	ICMP_MIB_INSRCQUENCHS,			/* InSrcQuenchs */
-	ICMP_MIB_INREDIRECTS,			/* InRedirects */
-	ICMP_MIB_INECHOS,			/* InEchos */
-	ICMP_MIB_INECHOREPS,			/* InEchoReps */
-	ICMP_MIB_INTIMESTAMPS,			/* InTimestamps */
-	ICMP_MIB_INTIMESTAMPREPS,		/* InTimestampReps */
-	ICMP_MIB_INADDRMASKS,			/* InAddrMasks */
-	ICMP_MIB_INADDRMASKREPS,		/* InAddrMaskReps */
-	ICMP_MIB_OUTMSGS,			/* OutMsgs */
-	ICMP_MIB_OUTERRORS,			/* OutErrors */
-	ICMP_MIB_OUTDESTUNREACHS,		/* OutDestUnreachs */
-	ICMP_MIB_OUTTIMEEXCDS,			/* OutTimeExcds */
-	ICMP_MIB_OUTPARMPROBS,			/* OutParmProbs */
-	ICMP_MIB_OUTSRCQUENCHS,			/* OutSrcQuenchs */
-	ICMP_MIB_OUTREDIRECTS,			/* OutRedirects */
-	ICMP_MIB_OUTECHOS,			/* OutEchos */
-	ICMP_MIB_OUTECHOREPS,			/* OutEchoReps */
-	ICMP_MIB_OUTTIMESTAMPS,			/* OutTimestamps */
-	ICMP_MIB_OUTTIMESTAMPREPS,		/* OutTimestampReps */
-	ICMP_MIB_OUTADDRMASKS,			/* OutAddrMasks */
-	ICMP_MIB_OUTADDRMASKREPS,		/* OutAddrMaskReps */
-	__ICMP_MIB_MAX
-};
-
-#define __ICMPMSG_MIB_MAX 512	/* Out+In for all 8-bit ICMP types */
-
-/* icmp6 mib definitions */
-/*
- * RFC 2466:  ICMPv6-MIB
- */
-enum
-{
-	ICMP6_MIB_NUM = 0,
-	ICMP6_MIB_INMSGS,			/* InMsgs */
-	ICMP6_MIB_INERRORS,			/* InErrors */
-	ICMP6_MIB_OUTMSGS,			/* OutMsgs */
-	ICMP6_MIB_OUTERRORS,			/* OutErrors */
-	__ICMP6_MIB_MAX
-};
-
-#define __ICMP6MSG_MIB_MAX 512 /* Out+In for all 8-bit ICMPv6 types */
-
-/* tcp mib definitions */
-/*
- * RFC 1213:  MIB-II TCP group
- * RFC 2012 (updates 1213):  SNMPv2-MIB-TCP
- */
-enum
-{
-	TCP_MIB_NUM = 0,
-	TCP_MIB_RTOALGORITHM,			/* RtoAlgorithm */
-	TCP_MIB_RTOMIN,				/* RtoMin */
-	TCP_MIB_RTOMAX,				/* RtoMax */
-	TCP_MIB_MAXCONN,			/* MaxConn */
-	TCP_MIB_ACTIVEOPENS,			/* ActiveOpens */
-	TCP_MIB_PASSIVEOPENS,			/* PassiveOpens */
-	TCP_MIB_ATTEMPTFAILS,			/* AttemptFails */
-	TCP_MIB_ESTABRESETS,			/* EstabResets */
-	TCP_MIB_CURRESTAB,			/* CurrEstab */
-	TCP_MIB_INSEGS,				/* InSegs */
-	TCP_MIB_OUTSEGS,			/* OutSegs */
-	TCP_MIB_RETRANSSEGS,			/* RetransSegs */
-	TCP_MIB_INERRS,				/* InErrs */
-	TCP_MIB_OUTRSTS,			/* OutRsts */
-	__TCP_MIB_MAX
-};
-
-/* udp mib definitions */
-/*
- * RFC 1213:  MIB-II UDP group
- * RFC 2013 (updates 1213):  SNMPv2-MIB-UDP
- */
-enum
-{
-	UDP_MIB_NUM = 0,
-	UDP_MIB_INDATAGRAMS,			/* InDatagrams */
-	UDP_MIB_NOPORTS,			/* NoPorts */
-	UDP_MIB_INERRORS,			/* InErrors */
-	UDP_MIB_OUTDATAGRAMS,			/* OutDatagrams */
-	UDP_MIB_RCVBUFERRORS,			/* RcvbufErrors */
-	UDP_MIB_SNDBUFERRORS,			/* SndbufErrors */
-	__UDP_MIB_MAX
-};
-
-/* linux mib definitions */
-enum
-{
-	LINUX_MIB_NUM = 0,
-	LINUX_MIB_SYNCOOKIESSENT,		/* SyncookiesSent */
-	LINUX_MIB_SYNCOOKIESRECV,		/* SyncookiesRecv */
-	LINUX_MIB_SYNCOOKIESFAILED,		/* SyncookiesFailed */
-	LINUX_MIB_EMBRYONICRSTS,		/* EmbryonicRsts */
-	LINUX_MIB_PRUNECALLED,			/* PruneCalled */
-	LINUX_MIB_RCVPRUNED,			/* RcvPruned */
-	LINUX_MIB_OFOPRUNED,			/* OfoPruned */
-	LINUX_MIB_OUTOFWINDOWICMPS,		/* OutOfWindowIcmps */
-	LINUX_MIB_LOCKDROPPEDICMPS,		/* LockDroppedIcmps */
-	LINUX_MIB_ARPFILTER,			/* ArpFilter */
-	LINUX_MIB_TIMEWAITED,			/* TimeWaited */
-	LINUX_MIB_TIMEWAITRECYCLED,		/* TimeWaitRecycled */
-	LINUX_MIB_TIMEWAITKILLED,		/* TimeWaitKilled */
-	LINUX_MIB_PAWSPASSIVEREJECTED,		/* PAWSPassiveRejected */
-	LINUX_MIB_PAWSACTIVEREJECTED,		/* PAWSActiveRejected */
-	LINUX_MIB_PAWSESTABREJECTED,		/* PAWSEstabRejected */
-	LINUX_MIB_DELAYEDACKS,			/* DelayedACKs */
-	LINUX_MIB_DELAYEDACKLOCKED,		/* DelayedACKLocked */
-	LINUX_MIB_DELAYEDACKLOST,		/* DelayedACKLost */
-	LINUX_MIB_LISTENOVERFLOWS,		/* ListenOverflows */
-	LINUX_MIB_LISTENDROPS,			/* ListenDrops */
-	LINUX_MIB_TCPPREQUEUED,			/* TCPPrequeued */
-	LINUX_MIB_TCPDIRECTCOPYFROMBACKLOG,	/* TCPDirectCopyFromBacklog */
-	LINUX_MIB_TCPDIRECTCOPYFROMPREQUEUE,	/* TCPDirectCopyFromPrequeue */
-	LINUX_MIB_TCPPREQUEUEDROPPED,		/* TCPPrequeueDropped */
-	LINUX_MIB_TCPHPHITS,			/* TCPHPHits */
-	LINUX_MIB_TCPHPHITSTOUSER,		/* TCPHPHitsToUser */
-	LINUX_MIB_TCPPUREACKS,			/* TCPPureAcks */
-	LINUX_MIB_TCPHPACKS,			/* TCPHPAcks */
-	LINUX_MIB_TCPRENORECOVERY,		/* TCPRenoRecovery */
-	LINUX_MIB_TCPSACKRECOVERY,		/* TCPSackRecovery */
-	LINUX_MIB_TCPSACKRENEGING,		/* TCPSACKReneging */
-	LINUX_MIB_TCPFACKREORDER,		/* TCPFACKReorder */
-	LINUX_MIB_TCPSACKREORDER,		/* TCPSACKReorder */
-	LINUX_MIB_TCPRENOREORDER,		/* TCPRenoReorder */
-	LINUX_MIB_TCPTSREORDER,			/* TCPTSReorder */
-	LINUX_MIB_TCPFULLUNDO,			/* TCPFullUndo */
-	LINUX_MIB_TCPPARTIALUNDO,		/* TCPPartialUndo */
-	LINUX_MIB_TCPDSACKUNDO,			/* TCPDSACKUndo */
-	LINUX_MIB_TCPLOSSUNDO,			/* TCPLossUndo */
-	LINUX_MIB_TCPLOSTRETRANSMIT,		/* TCPLostRetransmit */
-	LINUX_MIB_TCPRENOFAILURES,		/* TCPRenoFailures */
-	LINUX_MIB_TCPSACKFAILURES,		/* TCPSackFailures */
-	LINUX_MIB_TCPLOSSFAILURES,		/* TCPLossFailures */
-	LINUX_MIB_TCPFASTRETRANS,		/* TCPFastRetrans */
-	LINUX_MIB_TCPFORWARDRETRANS,		/* TCPForwardRetrans */
-	LINUX_MIB_TCPSLOWSTARTRETRANS,		/* TCPSlowStartRetrans */
-	LINUX_MIB_TCPTIMEOUTS,			/* TCPTimeouts */
-	LINUX_MIB_TCPRENORECOVERYFAIL,		/* TCPRenoRecoveryFail */
-	LINUX_MIB_TCPSACKRECOVERYFAIL,		/* TCPSackRecoveryFail */
-	LINUX_MIB_TCPSCHEDULERFAILED,		/* TCPSchedulerFailed */
-	LINUX_MIB_TCPRCVCOLLAPSED,		/* TCPRcvCollapsed */
-	LINUX_MIB_TCPDSACKOLDSENT,		/* TCPDSACKOldSent */
-	LINUX_MIB_TCPDSACKOFOSENT,		/* TCPDSACKOfoSent */
-	LINUX_MIB_TCPDSACKRECV,			/* TCPDSACKRecv */
-	LINUX_MIB_TCPDSACKOFORECV,		/* TCPDSACKOfoRecv */
-	LINUX_MIB_TCPABORTONDATA,		/* TCPAbortOnData */
-	LINUX_MIB_TCPABORTONCLOSE,		/* TCPAbortOnClose */
-	LINUX_MIB_TCPABORTONMEMORY,		/* TCPAbortOnMemory */
-	LINUX_MIB_TCPABORTONTIMEOUT,		/* TCPAbortOnTimeout */
-	LINUX_MIB_TCPABORTONLINGER,		/* TCPAbortOnLinger */
-	LINUX_MIB_TCPABORTFAILED,		/* TCPAbortFailed */
-	LINUX_MIB_TCPMEMORYPRESSURES,		/* TCPMemoryPressures */
-	LINUX_MIB_TCPSACKDISCARD,		/* TCPSACKDiscard */
-	LINUX_MIB_TCPDSACKIGNOREDOLD,		/* TCPSACKIgnoredOld */
-	LINUX_MIB_TCPDSACKIGNOREDNOUNDO,	/* TCPSACKIgnoredNoUndo */
-	LINUX_MIB_TCPSPURIOUSRTOS,		/* TCPSpuriousRTOs */
-	LINUX_MIB_TCPMD5NOTFOUND,		/* TCPMD5NotFound */
-	LINUX_MIB_TCPMD5UNEXPECTED,		/* TCPMD5Unexpected */
-	LINUX_MIB_SACKSHIFTED,
-	LINUX_MIB_SACKMERGED,
-	LINUX_MIB_SACKSHIFTFALLBACK,
-	LINUX_MIB_TCPBACKLOGDROP,
-	LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */
-	LINUX_MIB_TCPDEFERACCEPTDROP,
-	LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
-	LINUX_MIB_TCPTIMEWAITOVERFLOW,		/* TCPTimeWaitOverflow */
-	LINUX_MIB_TCPREQQFULLDOCOOKIES,		/* TCPReqQFullDoCookies */
-	LINUX_MIB_TCPREQQFULLDROP,		/* TCPReqQFullDrop */
-	LINUX_MIB_TCPRETRANSFAIL,		/* TCPRetransFail */
-	LINUX_MIB_TCPRCVCOALESCE,		/* TCPRcvCoalesce */
-	LINUX_MIB_TCPOFOQUEUE,			/* TCPOFOQueue */
-	LINUX_MIB_TCPOFODROP,			/* TCPOFODrop */
-	LINUX_MIB_TCPOFOMERGE,			/* TCPOFOMerge */
-	LINUX_MIB_TCPCHALLENGEACK,		/* TCPChallengeACK */
-	LINUX_MIB_TCPSYNCHALLENGE,		/* TCPSYNChallenge */
-	LINUX_MIB_TCPFASTOPENACTIVE,		/* TCPFastOpenActive */
-	LINUX_MIB_TCPFASTOPENPASSIVE,		/* TCPFastOpenPassive*/
-	LINUX_MIB_TCPFASTOPENPASSIVEFAIL,	/* TCPFastOpenPassiveFail */
-	LINUX_MIB_TCPFASTOPENLISTENOVERFLOW,	/* TCPFastOpenListenOverflow */
-	LINUX_MIB_TCPFASTOPENCOOKIEREQD,	/* TCPFastOpenCookieReqd */
-	__LINUX_MIB_MAX
-};
-
-/* linux Xfrm mib definitions */
-enum
-{
-	LINUX_MIB_XFRMNUM = 0,
-	LINUX_MIB_XFRMINERROR,			/* XfrmInError */
-	LINUX_MIB_XFRMINBUFFERERROR,		/* XfrmInBufferError */
-	LINUX_MIB_XFRMINHDRERROR,		/* XfrmInHdrError */
-	LINUX_MIB_XFRMINNOSTATES,		/* XfrmInNoStates */
-	LINUX_MIB_XFRMINSTATEPROTOERROR,	/* XfrmInStateProtoError */
-	LINUX_MIB_XFRMINSTATEMODEERROR,		/* XfrmInStateModeError */
-	LINUX_MIB_XFRMINSTATESEQERROR,		/* XfrmInStateSeqError */
-	LINUX_MIB_XFRMINSTATEEXPIRED,		/* XfrmInStateExpired */
-	LINUX_MIB_XFRMINSTATEMISMATCH,		/* XfrmInStateMismatch */
-	LINUX_MIB_XFRMINSTATEINVALID,		/* XfrmInStateInvalid */
-	LINUX_MIB_XFRMINTMPLMISMATCH,		/* XfrmInTmplMismatch */
-	LINUX_MIB_XFRMINNOPOLS,			/* XfrmInNoPols */
-	LINUX_MIB_XFRMINPOLBLOCK,		/* XfrmInPolBlock */
-	LINUX_MIB_XFRMINPOLERROR,		/* XfrmInPolError */
-	LINUX_MIB_XFRMOUTERROR,			/* XfrmOutError */
-	LINUX_MIB_XFRMOUTBUNDLEGENERROR,	/* XfrmOutBundleGenError */
-	LINUX_MIB_XFRMOUTBUNDLECHECKERROR,	/* XfrmOutBundleCheckError */
-	LINUX_MIB_XFRMOUTNOSTATES,		/* XfrmOutNoStates */
-	LINUX_MIB_XFRMOUTSTATEPROTOERROR,	/* XfrmOutStateProtoError */
-	LINUX_MIB_XFRMOUTSTATEMODEERROR,	/* XfrmOutStateModeError */
-	LINUX_MIB_XFRMOUTSTATESEQERROR,		/* XfrmOutStateSeqError */
-	LINUX_MIB_XFRMOUTSTATEEXPIRED,		/* XfrmOutStateExpired */
-	LINUX_MIB_XFRMOUTPOLBLOCK,		/* XfrmOutPolBlock */
-	LINUX_MIB_XFRMOUTPOLDEAD,		/* XfrmOutPolDead */
-	LINUX_MIB_XFRMOUTPOLERROR,		/* XfrmOutPolError */
-	LINUX_MIB_XFRMFWDHDRERROR,		/* XfrmFwdHdrError*/
-	__LINUX_MIB_XFRMMAX
-};
-
-#endif	/* _LINUX_SNMP_H */
diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h
index e3e395acc2fd..e8d702e0fd89 100644
--- a/include/linux/sock_diag.h
+++ b/include/linux/sock_diag.h
@@ -1,29 +1,8 @@
 #ifndef __SOCK_DIAG_H__
 #define __SOCK_DIAG_H__
 
-#include <linux/types.h>
+#include <uapi/linux/sock_diag.h>
 
-#define SOCK_DIAG_BY_FAMILY 20
-
-struct sock_diag_req {
-	__u8	sdiag_family;
-	__u8	sdiag_protocol;
-};
-
-enum {
-	SK_MEMINFO_RMEM_ALLOC,
-	SK_MEMINFO_RCVBUF,
-	SK_MEMINFO_WMEM_ALLOC,
-	SK_MEMINFO_SNDBUF,
-	SK_MEMINFO_FWD_ALLOC,
-	SK_MEMINFO_WMEM_QUEUED,
-	SK_MEMINFO_OPTMEM,
-	SK_MEMINFO_BACKLOG,
-
-	SK_MEMINFO_VARS,
-};
-
-#ifdef __KERNEL__
 struct sk_buff;
 struct nlmsghdr;
 struct sock;
@@ -44,5 +23,4 @@ void sock_diag_save_cookie(void *sk, __u32 *cookie);
 
 int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr);
 
-#endif /* KERNEL */
 #endif
diff --git a/include/linux/socket.h b/include/linux/socket.h
index ba7b2e817cfa..9a546ff853dc 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -1,30 +1,13 @@
 #ifndef _LINUX_SOCKET_H
 #define _LINUX_SOCKET_H
 
-/*
- * Desired design of maximum size and alignment (see RFC2553)
- */
-#define _K_SS_MAXSIZE	128	/* Implementation specific max size */
-#define _K_SS_ALIGNSIZE	(__alignof__ (struct sockaddr *))
-				/* Implementation specific desired alignment */
-
-typedef unsigned short __kernel_sa_family_t;
-
-struct __kernel_sockaddr_storage {
-	__kernel_sa_family_t	ss_family;		/* address family */
-	/* Following field(s) are implementation specific */
-	char		__data[_K_SS_MAXSIZE - sizeof(unsigned short)];
-				/* space to achieve desired size, */
-				/* _SS_MAXSIZE value minus size of ss_family */
-} __attribute__ ((aligned(_K_SS_ALIGNSIZE)));	/* force desired alignment */
-
-#ifdef __KERNEL__
 
 #include <asm/socket.h>			/* arch-dependent defines	*/
 #include <linux/sockios.h>		/* the SIOCxxx I/O controls	*/
 #include <linux/uio.h>			/* iovec support		*/
 #include <linux/types.h>		/* pid_t			*/
 #include <linux/compiler.h>		/* __user			*/
+#include <uapi/linux/socket.h>
 
 struct pid;
 struct cred;
@@ -340,5 +323,4 @@ extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen
 			  unsigned int flags, struct timespec *timeout);
 extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
 			  unsigned int vlen, unsigned int flags);
-#endif /* not kernel and not glibc */
 #endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/sockios.h b/include/linux/sockios.h
deleted file mode 100644
index 7997a506ad41..000000000000
--- a/include/linux/sockios.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions of the socket-level I/O control calls.
- *
- * Version:	@(#)sockios.h	1.0.2	03/09/93
- *
- * Authors:	Ross Biro
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_SOCKIOS_H
-#define _LINUX_SOCKIOS_H
-
-#include <asm/sockios.h>
-
-/* Linux-specific socket ioctls */
-#define SIOCINQ		FIONREAD
-#define SIOCOUTQ	TIOCOUTQ        /* output queue size (not sent + not acked) */
-
-/* Routing table calls. */
-#define SIOCADDRT	0x890B		/* add routing table entry	*/
-#define SIOCDELRT	0x890C		/* delete routing table entry	*/
-#define SIOCRTMSG	0x890D		/* call to routing system	*/
-
-/* Socket configuration controls. */
-#define SIOCGIFNAME	0x8910		/* get iface name		*/
-#define SIOCSIFLINK	0x8911		/* set iface channel		*/
-#define SIOCGIFCONF	0x8912		/* get iface list		*/
-#define SIOCGIFFLAGS	0x8913		/* get flags			*/
-#define SIOCSIFFLAGS	0x8914		/* set flags			*/
-#define SIOCGIFADDR	0x8915		/* get PA address		*/
-#define SIOCSIFADDR	0x8916		/* set PA address		*/
-#define SIOCGIFDSTADDR	0x8917		/* get remote PA address	*/
-#define SIOCSIFDSTADDR	0x8918		/* set remote PA address	*/
-#define SIOCGIFBRDADDR	0x8919		/* get broadcast PA address	*/
-#define SIOCSIFBRDADDR	0x891a		/* set broadcast PA address	*/
-#define SIOCGIFNETMASK	0x891b		/* get network PA mask		*/
-#define SIOCSIFNETMASK	0x891c		/* set network PA mask		*/
-#define SIOCGIFMETRIC	0x891d		/* get metric			*/
-#define SIOCSIFMETRIC	0x891e		/* set metric			*/
-#define SIOCGIFMEM	0x891f		/* get memory address (BSD)	*/
-#define SIOCSIFMEM	0x8920		/* set memory address (BSD)	*/
-#define SIOCGIFMTU	0x8921		/* get MTU size			*/
-#define SIOCSIFMTU	0x8922		/* set MTU size			*/
-#define SIOCSIFNAME	0x8923		/* set interface name */
-#define	SIOCSIFHWADDR	0x8924		/* set hardware address 	*/
-#define SIOCGIFENCAP	0x8925		/* get/set encapsulations       */
-#define SIOCSIFENCAP	0x8926		
-#define SIOCGIFHWADDR	0x8927		/* Get hardware address		*/
-#define SIOCGIFSLAVE	0x8929		/* Driver slaving support	*/
-#define SIOCSIFSLAVE	0x8930
-#define SIOCADDMULTI	0x8931		/* Multicast address lists	*/
-#define SIOCDELMULTI	0x8932
-#define SIOCGIFINDEX	0x8933		/* name -> if_index mapping	*/
-#define SIOGIFINDEX	SIOCGIFINDEX	/* misprint compatibility :-)	*/
-#define SIOCSIFPFLAGS	0x8934		/* set/get extended flags set	*/
-#define SIOCGIFPFLAGS	0x8935
-#define SIOCDIFADDR	0x8936		/* delete PA address		*/
-#define	SIOCSIFHWBROADCAST	0x8937	/* set hardware broadcast addr	*/
-#define SIOCGIFCOUNT	0x8938		/* get number of devices */
-
-#define SIOCGIFBR	0x8940		/* Bridging support		*/
-#define SIOCSIFBR	0x8941		/* Set bridging options 	*/
-
-#define SIOCGIFTXQLEN	0x8942		/* Get the tx queue length	*/
-#define SIOCSIFTXQLEN	0x8943		/* Set the tx queue length 	*/
-
-/* SIOCGIFDIVERT was:	0x8944		Frame diversion support */
-/* SIOCSIFDIVERT was:	0x8945		Set frame diversion options */
-
-#define SIOCETHTOOL	0x8946		/* Ethtool interface		*/
-
-#define SIOCGMIIPHY	0x8947		/* Get address of MII PHY in use. */
-#define SIOCGMIIREG	0x8948		/* Read MII PHY register.	*/
-#define SIOCSMIIREG	0x8949		/* Write MII PHY register.	*/
-
-#define SIOCWANDEV	0x894A		/* get/set netdev parameters	*/
-
-#define SIOCOUTQNSD	0x894B		/* output queue size (not sent only) */
-
-/* ARP cache control calls. */
-		    /*  0x8950 - 0x8952  * obsolete calls, don't re-use */
-#define SIOCDARP	0x8953		/* delete ARP table entry	*/
-#define SIOCGARP	0x8954		/* get ARP table entry		*/
-#define SIOCSARP	0x8955		/* set ARP table entry		*/
-
-/* RARP cache control calls. */
-#define SIOCDRARP	0x8960		/* delete RARP table entry	*/
-#define SIOCGRARP	0x8961		/* get RARP table entry		*/
-#define SIOCSRARP	0x8962		/* set RARP table entry		*/
-
-/* Driver configuration calls */
-
-#define SIOCGIFMAP	0x8970		/* Get device parameters	*/
-#define SIOCSIFMAP	0x8971		/* Set device parameters	*/
-
-/* DLCI configuration calls */
-
-#define SIOCADDDLCI	0x8980		/* Create new DLCI device	*/
-#define SIOCDELDLCI	0x8981		/* Delete DLCI device		*/
-
-#define SIOCGIFVLAN	0x8982		/* 802.1Q VLAN support		*/
-#define SIOCSIFVLAN	0x8983		/* Set 802.1Q VLAN options 	*/
-
-/* bonding calls */
-
-#define SIOCBONDENSLAVE	0x8990		/* enslave a device to the bond */
-#define SIOCBONDRELEASE 0x8991		/* release a slave from the bond*/
-#define SIOCBONDSETHWADDR      0x8992	/* set the hw addr of the bond  */
-#define SIOCBONDSLAVEINFOQUERY 0x8993   /* rtn info about slave state   */
-#define SIOCBONDINFOQUERY      0x8994	/* rtn info about bond state    */
-#define SIOCBONDCHANGEACTIVE   0x8995   /* update to a new active slave */
-			
-/* bridge calls */
-#define SIOCBRADDBR     0x89a0		/* create new bridge device     */
-#define SIOCBRDELBR     0x89a1		/* remove bridge device         */
-#define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
-#define SIOCBRDELIF	0x89a3		/* remove interface from bridge */
-
-/* hardware time stamping: parameters in linux/net_tstamp.h */
-#define SIOCSHWTSTAMP   0x89b0
-
-/* Device private ioctl calls */
-
-/*
- *	These 16 ioctls are available to devices via the do_ioctl() device
- *	vector. Each device should include this file and redefine these names
- *	as their own. Because these are device dependent it is a good idea
- *	_NOT_ to issue them to random objects and hope.
- *
- *	THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
- */
- 
-#define SIOCDEVPRIVATE	0x89F0	/* to 89FF */
-
-/*
- *	These 16 ioctl calls are protocol private
- */
- 
-#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */
-#endif	/* _LINUX_SOCKIOS_H */
diff --git a/include/linux/som.h b/include/linux/som.h
deleted file mode 100644
index 166594e4e7be..000000000000
--- a/include/linux/som.h
+++ /dev/null
@@ -1,154 +0,0 @@
-#ifndef _LINUX_SOM_H
-#define _LINUX_SOM_H
-
-/* File format definition for SOM executables / shared libraries */
-
-/* we need struct timespec */
-#include <linux/time.h>
-
-#define SOM_PAGESIZE 4096
-
-/* this is the SOM header */
-struct som_hdr {
-	short		system_id;		/* magic number - system */
-	short		a_magic;		/* magic number - file type */
-	unsigned int	version_id;		/* versiod ID: YYMMDDHH */
-	struct timespec	file_time;		/* system clock */
-	unsigned int	entry_space;		/* space for entry point */
-	unsigned int	entry_subspace;		/* subspace for entry point */
-	unsigned int	entry_offset;		/* offset of entry point */
-	unsigned int	aux_header_location;	/* auxiliary header location */
-	unsigned int	aux_header_size;	/* auxiliary header size */
-	unsigned int	som_length;		/* length of entire SOM */
-	unsigned int	presumed_dp;		/* compiler's DP value */
-	unsigned int	space_location;		/* space dictionary location */
-	unsigned int	space_total;		/* number of space entries */
-	unsigned int	subspace_location;	/* subspace entries location */
-	unsigned int	subspace_total;		/* number of subspace entries */
-	unsigned int	loader_fixup_location;	/* MPE/iX loader fixup */
-	unsigned int	loader_fixup_total;	/* number of fixup records */
-	unsigned int	space_strings_location;	/* (sub)space names */
-	unsigned int	space_strings_size;	/* size of strings area */
-	unsigned int	init_array_location;	/* reserved */
-	unsigned int	init_array_total;	/* reserved */
-	unsigned int	compiler_location;	/* module dictionary */
-	unsigned int	compiler_total;		/* number of modules */
-	unsigned int	symbol_location;	/* symbol dictionary */
-	unsigned int	symbol_total;		/* number of symbols */
-	unsigned int	fixup_request_location;	/* fixup requests */
-	unsigned int	fixup_request_total;	/* number of fixup requests */
-	unsigned int	symbol_strings_location;/* module & symbol names area */
-	unsigned int	symbol_strings_size;	/* size of strings area */
-	unsigned int	unloadable_sp_location;	/* unloadable spaces location */
-	unsigned int	unloadable_sp_size;	/* size of data */
-	unsigned int	checksum;
-};
-
-/* values for system_id */
-
-#define SOM_SID_PARISC_1_0	0x020b
-#define SOM_SID_PARISC_1_1	0x0210
-#define SOM_SID_PARISC_2_0	0x0214
-
-/* values for a_magic */
-
-#define SOM_LIB_EXEC		0x0104
-#define SOM_RELOCATABLE		0x0106
-#define SOM_EXEC_NONSHARE	0x0107
-#define SOM_EXEC_SHARE		0x0108
-#define SOM_EXEC_DEMAND		0x010B
-#define SOM_LIB_DYN		0x010D
-#define SOM_LIB_SHARE		0x010E
-#define SOM_LIB_RELOC		0x0619
-
-/* values for version_id.  Decimal not hex, yes.  Grr. */
-
-#define SOM_ID_OLD		85082112
-#define SOM_ID_NEW		87102412
-
-struct aux_id {
-	unsigned int	mandatory :1;	/* the linker must understand this */
-	unsigned int	copy	  :1;	/* Must be copied by the linker */
-	unsigned int	append	  :1;	/* Must be merged by the linker */
-	unsigned int	ignore	  :1;	/* Discard section if unknown */
-	unsigned int	reserved  :12;
-	unsigned int	type	  :16;	/* Header type */
-	unsigned int	length;		/* length of _following_ data */
-};
-
-/* The Exec Auxiliary Header.  Called The HP-UX Header within HP apparently. */
-struct som_exec_auxhdr {
-	struct aux_id	som_auxhdr;
-	int		exec_tsize;	/* Text size in bytes */
-	int		exec_tmem;	/* Address to load text at */
-	int		exec_tfile;	/* Location of text in file */
-	int		exec_dsize;	/* Data size in bytes */
-	int		exec_dmem;	/* Address to load data at */
-	int		exec_dfile;	/* Location of data in file */
-	int		exec_bsize;	/* Uninitialised data (bss) */
-	int		exec_entry;	/* Address to start executing */
-	int		exec_flags;	/* loader flags */
-	int		exec_bfill;	/* initialisation value for bss */
-};
-
-/* Oh, the things people do to avoid casts.  Shame it'll break with gcc's
- * new aliasing rules really.
- */
-union name_pt {
-	char *		n_name;
-	unsigned int	n_strx;
-};
-
-/* The Space Dictionary */
-struct space_dictionary_record {
-	union name_pt	name;			/* index to subspace name */
-	unsigned int	is_loadable	:1;	/* loadable */
-	unsigned int	is_defined	:1;	/* defined within file */
-	unsigned int	is_private	:1;	/* not sharable */
-	unsigned int	has_intermediate_code :1; /* contains intermediate code */
-	unsigned int	is_tspecific	:1;	/* thread specific */
-	unsigned int	reserved	:11;	/* for future expansion */
-	unsigned int	sort_key	:8;	/* for linker */
-	unsigned int	reserved2	:8;	/* for future expansion */
-
-	int		space_number;		/* index */
-	int		subspace_index;		/* index into subspace dict */
-	unsigned int	subspace_quantity;	/* number of subspaces */
-	int		loader_fix_index;	/* for loader */
-	unsigned int	loader_fix_quantity;	/* for loader */
-	int		init_pointer_index;	/* data pointer array index */
-	unsigned int	init_pointer_quantity;	/* number of data pointers */
-};
-
-/* The Subspace Dictionary */
-struct subspace_dictionary_record {
-	int		space_index;
-	unsigned int	access_control_bits :7;
-	unsigned int	memory_resident	:1;
-	unsigned int	dup_common	:1;
-	unsigned int	is_common	:1;
-	unsigned int	quadrant	:2;
-	unsigned int	initially_frozen :1;
-	unsigned int	is_first	:1;
-	unsigned int	code_only	:1;
-	unsigned int	sort_key	:8;
-	unsigned int	replicate_init	:1;
-	unsigned int	continuation	:1;
-	unsigned int	is_tspecific	:1;
-	unsigned int	is_comdat	:1;
-	unsigned int	reserved	:4;
-
-	int		file_loc_init_value;
-	unsigned int	initialization_length;
-	unsigned int	subspace_start;
-	unsigned int	subspace_length;
-
-	unsigned int	reserved2	:5;
-	unsigned int	alignment	:27;
-
-	union name_pt	name;
-	int		fixup_request_index;
-	unsigned int	fixup_request_quantity;
-};
-
-#endif /* _LINUX_SOM_H */
diff --git a/include/linux/sonet.h b/include/linux/sonet.h
index de8832dd272b..680f9a31df25 100644
--- a/include/linux/sonet.h
+++ b/include/linux/sonet.h
@@ -1,64 +1,10 @@
 /* sonet.h - SONET/SHD physical layer control */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
 #ifndef LINUX_SONET_H
 #define LINUX_SONET_H
 
-#define __SONET_ITEMS \
-    __HANDLE_ITEM(section_bip); 	/* section parity errors (B1) */ \
-    __HANDLE_ITEM(line_bip);		/* line parity errors (B2) */ \
-    __HANDLE_ITEM(path_bip);		/* path parity errors (B3) */ \
-    __HANDLE_ITEM(line_febe);		/* line parity errors at remote */ \
-    __HANDLE_ITEM(path_febe);		/* path parity errors at remote */ \
-    __HANDLE_ITEM(corr_hcs);		/* correctable header errors */ \
-    __HANDLE_ITEM(uncorr_hcs);		/* uncorrectable header errors */ \
-    __HANDLE_ITEM(tx_cells);		/* cells sent */ \
-    __HANDLE_ITEM(rx_cells);		/* cells received */
-
-struct sonet_stats {
-#define __HANDLE_ITEM(i) int i
-	__SONET_ITEMS
-#undef __HANDLE_ITEM
-} __attribute__ ((packed));
-
-
-#define SONET_GETSTAT	_IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
-					/* get statistics */
-#define SONET_GETSTATZ	_IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
-					/* ... and zero counters */
-#define SONET_SETDIAG	_IOWR('a',ATMIOC_PHYTYP+2,int)
-					/* set error insertion */
-#define SONET_CLRDIAG	_IOWR('a',ATMIOC_PHYTYP+3,int)
-					/* clear error insertion */
-#define SONET_GETDIAG	_IOR('a',ATMIOC_PHYTYP+4,int)
-					/* query error insertion */
-#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
-					/* set framing mode (SONET/SDH) */
-#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
-					/* get framing mode */
-#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
-  unsigned char[SONET_FRSENSE_SIZE])	/* get framing sense information */
-
-#define SONET_INS_SBIP	  1		/* section BIP */
-#define SONET_INS_LBIP	  2		/* line BIP */
-#define SONET_INS_PBIP	  4		/* path BIP */
-#define SONET_INS_FRAME	  8		/* out of frame */
-#define SONET_INS_LOS	 16		/* set line to zero */
-#define SONET_INS_LAIS	 32		/* line alarm indication signal */
-#define SONET_INS_PAIS	 64		/* path alarm indication signal */
-#define SONET_INS_HCS	128		/* insert HCS error */
-
-#define SONET_FRAME_SONET 0		/* SONET STS-3 framing */
-#define SONET_FRAME_SDH   1		/* SDH STM-1 framing */
-
-#define SONET_FRSENSE_SIZE 6		/* C1[3],H1[3] (0xff for unknown) */
-
-
-#ifdef __KERNEL__
 
 #include <linux/atomic.h>
+#include <uapi/linux/sonet.h>
 
 struct k_sonet_stats {
 #define __HANDLE_ITEM(i) atomic_t i
@@ -71,5 +17,3 @@ extern void sonet_subtract_stats(struct k_sonet_stats *from,
     struct sonet_stats *to);
 
 #endif
-
-#endif
diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h
index c0f87da78f8a..0b7cc265cc0b 100644
--- a/include/linux/sonypi.h
+++ b/include/linux/sonypi.h
@@ -32,117 +32,11 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
-
 #ifndef _SONYPI_H_
 #define _SONYPI_H_
 
-#include <linux/types.h>
-
-/* events the user application reading /dev/sonypi can use */
-
-#define SONYPI_EVENT_IGNORE			 0
-#define SONYPI_EVENT_JOGDIAL_DOWN		 1
-#define SONYPI_EVENT_JOGDIAL_UP			 2
-#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED	 3
-#define SONYPI_EVENT_JOGDIAL_UP_PRESSED		 4
-#define SONYPI_EVENT_JOGDIAL_PRESSED		 5
-#define SONYPI_EVENT_JOGDIAL_RELEASED		 6	/* obsolete */
-#define SONYPI_EVENT_CAPTURE_PRESSED		 7
-#define SONYPI_EVENT_CAPTURE_RELEASED		 8	/* obsolete */
-#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED	 9
-#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED	10
-#define SONYPI_EVENT_FNKEY_ESC			11
-#define SONYPI_EVENT_FNKEY_F1			12
-#define SONYPI_EVENT_FNKEY_F2			13
-#define SONYPI_EVENT_FNKEY_F3			14
-#define SONYPI_EVENT_FNKEY_F4			15
-#define SONYPI_EVENT_FNKEY_F5			16
-#define SONYPI_EVENT_FNKEY_F6			17
-#define SONYPI_EVENT_FNKEY_F7			18
-#define SONYPI_EVENT_FNKEY_F8			19
-#define SONYPI_EVENT_FNKEY_F9			20
-#define SONYPI_EVENT_FNKEY_F10			21
-#define SONYPI_EVENT_FNKEY_F11			22
-#define SONYPI_EVENT_FNKEY_F12			23
-#define SONYPI_EVENT_FNKEY_1			24
-#define SONYPI_EVENT_FNKEY_2			25
-#define SONYPI_EVENT_FNKEY_D			26
-#define SONYPI_EVENT_FNKEY_E			27
-#define SONYPI_EVENT_FNKEY_F			28
-#define SONYPI_EVENT_FNKEY_S			29
-#define SONYPI_EVENT_FNKEY_B			30
-#define SONYPI_EVENT_BLUETOOTH_PRESSED		31
-#define SONYPI_EVENT_PKEY_P1			32
-#define SONYPI_EVENT_PKEY_P2			33
-#define SONYPI_EVENT_PKEY_P3			34
-#define SONYPI_EVENT_BACK_PRESSED		35
-#define SONYPI_EVENT_LID_CLOSED			36
-#define SONYPI_EVENT_LID_OPENED			37
-#define SONYPI_EVENT_BLUETOOTH_ON		38
-#define SONYPI_EVENT_BLUETOOTH_OFF		39
-#define SONYPI_EVENT_HELP_PRESSED		40
-#define SONYPI_EVENT_FNKEY_ONLY			41
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN		42
-#define SONYPI_EVENT_JOGDIAL_FAST_UP		43
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED	44
-#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED	45
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN		46
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP		47
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED	48
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED	49
-#define SONYPI_EVENT_ZOOM_PRESSED		50
-#define SONYPI_EVENT_THUMBPHRASE_PRESSED	51
-#define SONYPI_EVENT_MEYE_FACE			52
-#define SONYPI_EVENT_MEYE_OPPOSITE		53
-#define SONYPI_EVENT_MEMORYSTICK_INSERT		54
-#define SONYPI_EVENT_MEMORYSTICK_EJECT		55
-#define SONYPI_EVENT_ANYBUTTON_RELEASED		56
-#define SONYPI_EVENT_BATTERY_INSERT		57
-#define SONYPI_EVENT_BATTERY_REMOVE		58
-#define SONYPI_EVENT_FNKEY_RELEASED		59
-#define SONYPI_EVENT_WIRELESS_ON		60
-#define SONYPI_EVENT_WIRELESS_OFF		61
-#define SONYPI_EVENT_ZOOM_IN_PRESSED		62
-#define SONYPI_EVENT_ZOOM_OUT_PRESSED		63
-#define SONYPI_EVENT_CD_EJECT_PRESSED		64
-#define SONYPI_EVENT_MODEKEY_PRESSED		65
-#define SONYPI_EVENT_PKEY_P4			66
-#define SONYPI_EVENT_PKEY_P5			67
-#define SONYPI_EVENT_SETTINGKEY_PRESSED		68
-#define SONYPI_EVENT_VOLUME_INC_PRESSED		69
-#define SONYPI_EVENT_VOLUME_DEC_PRESSED		70
-#define SONYPI_EVENT_BRIGHTNESS_PRESSED		71
-#define SONYPI_EVENT_MEDIA_PRESSED		72
-#define SONYPI_EVENT_VENDOR_PRESSED		73
-
-/* get/set brightness */
-#define SONYPI_IOCGBRT		_IOR('v', 0, __u8)
-#define SONYPI_IOCSBRT		_IOW('v', 0, __u8)
-
-/* get battery full capacity/remaining capacity */
-#define SONYPI_IOCGBAT1CAP	_IOR('v', 2, __u16)
-#define SONYPI_IOCGBAT1REM	_IOR('v', 3, __u16)
-#define SONYPI_IOCGBAT2CAP	_IOR('v', 4, __u16)
-#define SONYPI_IOCGBAT2REM	_IOR('v', 5, __u16)
+#include <uapi/linux/sonypi.h>
 
-/* get battery flags: battery1/battery2/ac adapter present */
-#define SONYPI_BFLAGS_B1	0x01
-#define SONYPI_BFLAGS_B2	0x02
-#define SONYPI_BFLAGS_AC	0x04
-#define SONYPI_IOCGBATFLAGS	_IOR('v', 7, __u8)
-
-/* get/set bluetooth subsystem state on/off */
-#define SONYPI_IOCGBLUE		_IOR('v', 8, __u8)
-#define SONYPI_IOCSBLUE		_IOW('v', 9, __u8)
-
-/* get/set fan state on/off */
-#define SONYPI_IOCGFAN		_IOR('v', 10, __u8)
-#define SONYPI_IOCSFAN		_IOW('v', 11, __u8)
-
-/* get temperature (C) */
-#define SONYPI_IOCGTEMP		_IOR('v', 12, __u8)
-
-#ifdef __KERNEL__
 
 /* used only for communication between v4l and sonypi */
 
@@ -166,6 +60,4 @@
 #define SONYPI_COMMAND_GETCAMERAROMVERSION	18	/* obsolete */
 #define SONYPI_COMMAND_GETCAMERAREVISION	19	/* obsolete */
 
-#endif				/* __KERNEL__ */
-
 #endif				/* _SONYPI_H_ */
diff --git a/include/linux/sound.h b/include/linux/sound.h
index fae20ba01fbf..73ded040f1d7 100644
--- a/include/linux/sound.h
+++ b/include/linux/sound.h
@@ -1,33 +1,8 @@
 #ifndef _LINUX_SOUND_H
 #define _LINUX_SOUND_H
 
-/*
- * Minor numbers for the sound driver.
- */
-
-#include <linux/fs.h>
+#include <uapi/linux/sound.h>
 
-#define SND_DEV_CTL		0	/* Control port /dev/mixer */
-#define SND_DEV_SEQ		1	/* Sequencer output /dev/sequencer (FM
-						synthesizer and MIDI output) */
-#define SND_DEV_MIDIN		2	/* Raw midi access */
-#define SND_DEV_DSP		3	/* Digitized voice /dev/dsp */
-#define SND_DEV_AUDIO		4	/* Sparc compatible /dev/audio */
-#define SND_DEV_DSP16		5	/* Like /dev/dsp but 16 bits/sample */
-/* #define SND_DEV_STATUS	6 */	/* /dev/sndstat (obsolete) */
-#define SND_DEV_UNUSED		6
-#define SND_DEV_AWFM		7	/* Reserved */
-#define SND_DEV_SEQ2		8	/* /dev/sequencer, level 2 interface */
-/* #define SND_DEV_SNDPROC	9 */	/* /dev/sndproc for programmable devices (not used) */
-/* #define SND_DEV_DMMIDI	9 */
-#define SND_DEV_SYNTH		9	/* Raw synth access /dev/synth (same as /dev/dmfm) */
-#define SND_DEV_DMFM		10	/* Raw synth access /dev/dmfm */
-#define SND_DEV_UNKNOWN11	11
-#define SND_DEV_ADSP		12	/* Like /dev/dsp (obsolete) */
-#define SND_DEV_AMIDI		13	/* Like /dev/midi (obsolete) */
-#define SND_DEV_ADMMIDI		14	/* Like /dev/dmmidi (onsolete) */
-
-#ifdef __KERNEL__
 /*
  *	Sound core interface functions
  */
@@ -43,6 +18,4 @@ extern void unregister_sound_special(int unit);
 extern void unregister_sound_mixer(int unit);
 extern void unregister_sound_midi(int unit);
 extern void unregister_sound_dsp(int unit);
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SOUND_H */
diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h
index dfcf86f013a9..96c79cbd79ef 100644
--- a/include/linux/soundcard.h
+++ b/include/linux/soundcard.h
@@ -1,5 +1,3 @@
-#ifndef SOUNDCARD_H
-#define SOUNDCARD_H
 /*
  * Copyright by Hannu Savolainen 1993-1997
  *
@@ -23,174 +21,12 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  */
+#ifndef SOUNDCARD_H
+#define SOUNDCARD_H
 
-
-/*
- * OSS interface version. With versions earlier than 3.6 this value is
- * an integer with value less than 361. In versions 3.6 and later
- * it's a six digit hexadecimal value. For example value
- * of 0x030600 represents OSS version 3.6.0.
- * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
- * the currently active driver.
- */
-#define SOUND_VERSION	0x030802
-#define OPEN_SOUND_SYSTEM
-
-/* In Linux we need to be prepared for cross compiling */
-#include <linux/ioctl.h>
-
-/* Endian macros. */
-#ifdef __KERNEL__
 #  include <asm/byteorder.h>
-#else
-#  include <endian.h>
-#endif
-
-/*
- *	Supported card ID numbers (Should be somewhere else?)
- */
-
-#define SNDCARD_ADLIB		1
-#define SNDCARD_SB		2
-#define SNDCARD_PAS		3
-#define SNDCARD_GUS		4
-#define SNDCARD_MPU401		5
-#define SNDCARD_SB16		6
-#define SNDCARD_SB16MIDI	7
-#define SNDCARD_UART6850	8
-#define SNDCARD_GUS16		9
-#define SNDCARD_MSS		10
-#define SNDCARD_PSS     	11
-#define SNDCARD_SSCAPE		12
-#define SNDCARD_PSS_MPU     	13
-#define SNDCARD_PSS_MSS     	14
-#define SNDCARD_SSCAPE_MSS	15
-#define SNDCARD_TRXPRO		16
-#define SNDCARD_TRXPRO_SB	17
-#define SNDCARD_TRXPRO_MPU	18
-#define SNDCARD_MAD16		19
-#define SNDCARD_MAD16_MPU	20
-#define SNDCARD_CS4232		21
-#define SNDCARD_CS4232_MPU	22
-#define SNDCARD_MAUI		23
-#define SNDCARD_PSEUDO_MSS	24
-#define SNDCARD_GUSPNP		25
-#define SNDCARD_UART401		26
-/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
-
-/***********************************
- * IOCTL Commands for /dev/sequencer
- */
-
-#ifndef _SIOWR
-#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
-/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
-#define	SIOCPARM_MASK	IOCPARM_MASK
-#define	SIOC_VOID	IOC_VOID
-#define	SIOC_OUT	IOC_OUT
-#define	SIOC_IN		IOC_IN
-#define	SIOC_INOUT	IOC_INOUT
-#define _SIOC_SIZE	_IOC_SIZE
-#define _SIOC_DIR	_IOC_DIR
-#define _SIOC_NONE	_IOC_NONE
-#define _SIOC_READ	_IOC_READ
-#define _SIOC_WRITE	_IOC_WRITE
-#define	_SIO		_IO
-#define	_SIOR		_IOR
-#define	_SIOW		_IOW
-#define	_SIOWR		_IOWR
-#else
+#include <uapi/linux/soundcard.h>
 
-/* Ioctl's have the command encoded in the lower word,
- * and the size of any in or out parameters in the upper
- * word.  The high 2 bits of the upper word are used
- * to encode the in/out status of the parameter; for now
- * we restrict parameters to at most 8191 bytes.
- */
-/* #define	SIOCTYPE		(0xff<<8) */
-#define	SIOCPARM_MASK	0x1fff		/* parameters must be < 8192 bytes */
-#define	SIOC_VOID	0x00000000	/* no parameters */
-#define	SIOC_OUT	0x20000000	/* copy out parameters */
-#define	SIOC_IN		0x40000000	/* copy in parameters */
-#define	SIOC_INOUT	(SIOC_IN|SIOC_OUT)
-/* the 0x20000000 is so we can distinguish new ioctl's from old */
-#define	_SIO(x,y)	((int)(SIOC_VOID|(x<<8)|y))
-#define	_SIOR(x,y,t)	((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define	_SIOW(x,y,t)	((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-/* this should be _SIORW, but stdio got there first */
-#define	_SIOWR(x,y,t)	((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define _SIOC_SIZE(x)	((x>>16)&SIOCPARM_MASK)	
-#define _SIOC_DIR(x)	(x & 0xf0000000)
-#define _SIOC_NONE	SIOC_VOID
-#define _SIOC_READ	SIOC_OUT
-#define _SIOC_WRITE	SIOC_IN
-#  endif /* _IOWR */
-#endif  /* !_SIOWR */
-
-#define SNDCTL_SEQ_RESET		_SIO  ('Q', 0)
-#define SNDCTL_SEQ_SYNC			_SIO  ('Q', 1)
-#define SNDCTL_SYNTH_INFO		_SIOWR('Q', 2, struct synth_info)
-#define SNDCTL_SEQ_CTRLRATE		_SIOWR('Q', 3, int)	/* Set/get timer resolution (HZ) */
-#define SNDCTL_SEQ_GETOUTCOUNT		_SIOR ('Q', 4, int)
-#define SNDCTL_SEQ_GETINCOUNT		_SIOR ('Q', 5, int)
-#define SNDCTL_SEQ_PERCMODE		_SIOW ('Q', 6, int)
-#define SNDCTL_FM_LOAD_INSTR		_SIOW ('Q', 7, struct sbi_instrument)	/* Obsolete. Don't use!!!!!! */
-#define SNDCTL_SEQ_TESTMIDI		_SIOW ('Q', 8, int)
-#define SNDCTL_SEQ_RESETSAMPLES		_SIOW ('Q', 9, int)
-#define SNDCTL_SEQ_NRSYNTHS		_SIOR ('Q',10, int)
-#define SNDCTL_SEQ_NRMIDIS		_SIOR ('Q',11, int)
-#define SNDCTL_MIDI_INFO		_SIOWR('Q',12, struct midi_info)
-#define SNDCTL_SEQ_THRESHOLD		_SIOW ('Q',13, int)
-#define SNDCTL_SYNTH_MEMAVL		_SIOWR('Q',14, int)	/* in=dev#, out=memsize */
-#define SNDCTL_FM_4OP_ENABLE		_SIOW ('Q',15, int)	/* in=dev# */
-#define SNDCTL_SEQ_PANIC		_SIO  ('Q',17)
-#define SNDCTL_SEQ_OUTOFBAND		_SIOW ('Q',18, struct seq_event_rec)
-#define SNDCTL_SEQ_GETTIME		_SIOR ('Q',19, int)
-#define SNDCTL_SYNTH_ID			_SIOWR('Q',20, struct synth_info)
-#define SNDCTL_SYNTH_CONTROL		_SIOWR('Q',21, struct synth_control)
-#define SNDCTL_SYNTH_REMOVESAMPLE	_SIOWR('Q',22, struct remove_sample)
-
-typedef struct synth_control
-{
-	int devno;	/* Synthesizer # */
-	char data[4000]; /* Device spesific command/data record */
-}synth_control;
-
-typedef struct remove_sample
-{
-	int devno;	/* Synthesizer # */
-	int bankno;	/* MIDI bank # (0=General MIDI) */
-	int instrno;	/* MIDI instrument number */
-} remove_sample;
-
-typedef struct seq_event_rec {
-		unsigned char arr[8];
-} seq_event_rec;
-
-#define SNDCTL_TMR_TIMEBASE		_SIOWR('T', 1, int)
-#define SNDCTL_TMR_START		_SIO  ('T', 2)
-#define SNDCTL_TMR_STOP			_SIO  ('T', 3)
-#define SNDCTL_TMR_CONTINUE		_SIO  ('T', 4)
-#define SNDCTL_TMR_TEMPO		_SIOWR('T', 5, int)
-#define SNDCTL_TMR_SOURCE		_SIOWR('T', 6, int)
-#	define TMR_INTERNAL		0x00000001
-#	define TMR_EXTERNAL		0x00000002
-#		define TMR_MODE_MIDI	0x00000010
-#		define TMR_MODE_FSK	0x00000020
-#		define TMR_MODE_CLS	0x00000040
-#		define TMR_MODE_SMPTE	0x00000080
-#define SNDCTL_TMR_METRONOME		_SIOW ('T', 7, int)
-#define SNDCTL_TMR_SELECT		_SIOW ('T', 8, int)
-
-/*
- * Some big endian/little endian handling macros
- */
-
-#define _LINUX_PATCHKEY_H_INDIRECT
-#include <linux/patchkey.h>
-#undef _LINUX_PATCHKEY_H_INDIRECT
-
-#if defined(__KERNEL__)
 #  if defined(__BIG_ENDIAN)
 #    define AFMT_S16_NE AFMT_S16_BE
 #  elif defined(__LITTLE_ENDIAN)
@@ -198,1095 +34,4 @@ typedef struct seq_event_rec {
 #  else
 #    error "could not determine byte order"
 #  endif
-#else
-# if defined(__BYTE_ORDER)
-#  if __BYTE_ORDER == __BIG_ENDIAN
-#    define AFMT_S16_NE AFMT_S16_BE
-#  elif __BYTE_ORDER == __LITTLE_ENDIAN
-#    define AFMT_S16_NE AFMT_S16_LE
-#  else
-#    error "could not determine byte order"
-#  endif
-# endif
-#endif
-
-/*
- *	Sample loading mechanism for internal synthesizers (/dev/sequencer)
- *	The following patch_info structure has been designed to support
- *	Gravis UltraSound. It tries to be universal format for uploading
- *	sample based patches but is probably too limited.
- *
- *      (PBD) As Hannu guessed, the GUS structure is too limited for 
- *      the WaveFront, but this is the right place for a constant definition.
- */
-
-struct patch_info {
-		unsigned short key;		/* Use WAVE_PATCH here */
-#define WAVE_PATCH	   _PATCHKEY(0x04)
-#define GUS_PATCH	   WAVE_PATCH
-#define WAVEFRONT_PATCH    _PATCHKEY(0x06)
-
-		short device_no;	/* Synthesizer number */
-		short instr_no;		/* Midi pgm# */
-
-		unsigned int mode;
-/*
- * The least significant byte has the same format than the GUS .PAT
- * files
- */
-#define WAVE_16_BITS	0x01	/* bit 0 = 8 or 16 bit wave data. */
-#define WAVE_UNSIGNED	0x02	/* bit 1 = Signed - Unsigned data. */
-#define WAVE_LOOPING	0x04	/* bit 2 = looping enabled-1. */
-#define WAVE_BIDIR_LOOP	0x08	/* bit 3 = Set is bidirectional looping. */
-#define WAVE_LOOP_BACK	0x10	/* bit 4 = Set is looping backward. */
-#define WAVE_SUSTAIN_ON	0x20	/* bit 5 = Turn sustaining on. (Env. pts. 3)*/
-#define WAVE_ENVELOPES	0x40	/* bit 6 = Enable envelopes - 1 */
-#define WAVE_FAST_RELEASE 0x80	/* bit 7 = Shut off immediately after note off */
-				/* 	(use the env_rate/env_offs fields). */
-/* Linux specific bits */
-#define WAVE_VIBRATO	0x00010000	/* The vibrato info is valid */
-#define WAVE_TREMOLO	0x00020000	/* The tremolo info is valid */
-#define WAVE_SCALE	0x00040000	/* The scaling info is valid */
-#define WAVE_FRACTIONS	0x00080000	/* Fraction information is valid */
-/* Reserved bits */
-#define WAVE_ROM	0x40000000	/* For future use */
-#define WAVE_MULAW	0x20000000	/* For future use */
-/* Other bits must be zeroed */
-
-		int len;	/* Size of the wave data in bytes */
-		int loop_start, loop_end; /* Byte offsets from the beginning */
-
-/* 
- * The base_freq and base_note fields are used when computing the
- * playback speed for a note. The base_note defines the tone frequency
- * which is heard if the sample is played using the base_freq as the
- * playback speed.
- *
- * The low_note and high_note fields define the minimum and maximum note
- * frequencies for which this sample is valid. It is possible to define
- * more than one samples for an instrument number at the same time. The
- * low_note and high_note fields are used to select the most suitable one.
- *
- * The fields base_note, high_note and low_note should contain
- * the note frequency multiplied by 1000. For example value for the
- * middle A is 440*1000.
- */
-
-		unsigned int base_freq;
-		unsigned int base_note;
-		unsigned int high_note;
-		unsigned int low_note;
-		int panning;	/* -128=left, 127=right */
-		int detuning;
-
-/*	New fields introduced in version 1.99.5	*/
-
-       /* Envelope. Enabled by mode bit WAVE_ENVELOPES	*/
-		unsigned char	env_rate[ 6 ];	 /* GUS HW ramping rate */
-		unsigned char	env_offset[ 6 ]; /* 255 == 100% */
-
-	/* 
-	 * The tremolo, vibrato and scale info are not supported yet.
-	 * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
-	 * WAVE_SCALE
-	 */
-
-		unsigned char	tremolo_sweep;
-		unsigned char	tremolo_rate;
-		unsigned char	tremolo_depth;
-	
-		unsigned char	vibrato_sweep;
-		unsigned char	vibrato_rate;
-		unsigned char	vibrato_depth;
-
-		int		scale_frequency;
-		unsigned int	scale_factor;		/* from 0 to 2048 or 0 to 2 */
-	
-	        int		volume;
-		int		fractions;
-		int		reserved1;
-	        int		spare[2];
-		char data[1];	/* The waveform data starts here */
-	};
-
-struct sysex_info {
-		short key;		/* Use SYSEX_PATCH or MAUI_PATCH here */
-#define SYSEX_PATCH	_PATCHKEY(0x05)
-#define MAUI_PATCH	_PATCHKEY(0x06)
-		short device_no;	/* Synthesizer number */
-		int len;	/* Size of the sysex data in bytes */
-		unsigned char data[1];	/* Sysex data starts here */
-	};
-
-/*
- * /dev/sequencer input events.
- *
- * The data written to the /dev/sequencer is a stream of events. Events
- * are records of 4 or 8 bytes. The first byte defines the size. 
- * Any number of events can be written with a write call. There
- * is a set of macros for sending these events. Use these macros if you
- * want to maximize portability of your program.
- *
- * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
- * (All input events are currently 4 bytes long. Be prepared to support
- * 8 byte events also. If you receive any event having first byte >= 128,
- * it's a 8 byte event.
- *
- * The events are documented at the end of this file.
- *
- * Normal events (4 bytes)
- * There is also a 8 byte version of most of the 4 byte events. The
- * 8 byte one is recommended.
- */
-#define SEQ_NOTEOFF		0
-#define SEQ_FMNOTEOFF		SEQ_NOTEOFF	/* Just old name */
-#define SEQ_NOTEON		1
-#define	SEQ_FMNOTEON		SEQ_NOTEON
-#define SEQ_WAIT		TMR_WAIT_ABS
-#define SEQ_PGMCHANGE		3
-#define SEQ_FMPGMCHANGE		SEQ_PGMCHANGE
-#define SEQ_SYNCTIMER		TMR_START
-#define SEQ_MIDIPUTC		5
-#define SEQ_DRUMON		6	/*** OBSOLETE ***/
-#define SEQ_DRUMOFF		7	/*** OBSOLETE ***/
-#define SEQ_ECHO		TMR_ECHO	/* For synching programs with output */
-#define SEQ_AFTERTOUCH		9
-#define SEQ_CONTROLLER		10
-
-/*******************************************
- *	Midi controller numbers
- *******************************************
- * Controllers 0 to 31 (0x00 to 0x1f) and
- * 32 to 63 (0x20 to 0x3f) are continuous
- * controllers.
- * In the MIDI 1.0 these controllers are sent using
- * two messages. Controller numbers 0 to 31 are used
- * to send the MSB and the controller numbers 32 to 63
- * are for the LSB. Note that just 7 bits are used in MIDI bytes.
- */
-
-#define	   CTL_BANK_SELECT		0x00
-#define	   CTL_MODWHEEL			0x01
-#define    CTL_BREATH			0x02
-/*		undefined		0x03 */
-#define    CTL_FOOT			0x04
-#define    CTL_PORTAMENTO_TIME		0x05
-#define    CTL_DATA_ENTRY		0x06
-#define    CTL_MAIN_VOLUME		0x07
-#define    CTL_BALANCE			0x08
-/*		undefined		0x09 */
-#define    CTL_PAN			0x0a
-#define    CTL_EXPRESSION		0x0b
-/*		undefined		0x0c */
-/*		undefined		0x0d */
-/*		undefined		0x0e */
-/*		undefined		0x0f */
-#define    CTL_GENERAL_PURPOSE1	0x10
-#define    CTL_GENERAL_PURPOSE2	0x11
-#define    CTL_GENERAL_PURPOSE3	0x12
-#define    CTL_GENERAL_PURPOSE4	0x13
-/*		undefined		0x14 - 0x1f */
-
-/*		undefined		0x20 */
-/* The controller numbers 0x21 to 0x3f are reserved for the */
-/* least significant bytes of the controllers 0x00 to 0x1f. */
-/* These controllers are not recognised by the driver. */
-
-/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
-/* 0=OFF and 127=ON (intermediate values are possible) */
-#define    CTL_DAMPER_PEDAL		0x40
-#define    CTL_SUSTAIN			0x40	/* Alias */
-#define    CTL_HOLD			0x40	/* Alias */
-#define    CTL_PORTAMENTO		0x41
-#define    CTL_SOSTENUTO		0x42
-#define    CTL_SOFT_PEDAL		0x43
-/*		undefined		0x44 */
-#define    CTL_HOLD2			0x45
-/*		undefined		0x46 - 0x4f */
-
-#define    CTL_GENERAL_PURPOSE5	0x50
-#define    CTL_GENERAL_PURPOSE6	0x51
-#define    CTL_GENERAL_PURPOSE7	0x52
-#define    CTL_GENERAL_PURPOSE8	0x53
-/*		undefined		0x54 - 0x5a */
-#define    CTL_EXT_EFF_DEPTH		0x5b
-#define    CTL_TREMOLO_DEPTH		0x5c
-#define    CTL_CHORUS_DEPTH		0x5d
-#define    CTL_DETUNE_DEPTH		0x5e
-#define    CTL_CELESTE_DEPTH		0x5e	/* Alias for the above one */
-#define    CTL_PHASER_DEPTH		0x5f
-#define    CTL_DATA_INCREMENT		0x60
-#define    CTL_DATA_DECREMENT		0x61
-#define    CTL_NONREG_PARM_NUM_LSB	0x62
-#define    CTL_NONREG_PARM_NUM_MSB	0x63
-#define    CTL_REGIST_PARM_NUM_LSB	0x64
-#define    CTL_REGIST_PARM_NUM_MSB	0x65
-/*		undefined		0x66 - 0x78 */
-/*		reserved		0x79 - 0x7f */
-
-/* Pseudo controllers (not midi compatible) */
-#define    CTRL_PITCH_BENDER		255
-#define    CTRL_PITCH_BENDER_RANGE	254
-#define    CTRL_EXPRESSION		253	/* Obsolete */
-#define    CTRL_MAIN_VOLUME		252	/* Obsolete */
-#define SEQ_BALANCE		11
-#define SEQ_VOLMODE             12
-
-/*
- * Volume mode decides how volumes are used
- */
-
-#define VOL_METHOD_ADAGIO	1
-#define VOL_METHOD_LINEAR	2
-
-/*
- * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
- *	 input events.
- */
-
-/*
- * Event codes 0xf0 to 0xfc are reserved for future extensions.
- */
-
-#define SEQ_FULLSIZE		0xfd	/* Long events */
-/*
- *	SEQ_FULLSIZE events are used for loading patches/samples to the
- *	synthesizer devices. These events are passed directly to the driver
- *	of the associated synthesizer device. There is no limit to the size
- *	of the extended events. These events are not queued but executed
- *	immediately when the write() is called (execution can take several
- *	seconds of time). 
- *
- *	When a SEQ_FULLSIZE message is written to the device, it must
- *	be written using exactly one write() call. Other events cannot
- *	be mixed to the same write.
- *	
- *	For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the 
- *	/dev/sequencer. Don't write other data together with the instrument structure
- *	Set the key field of the structure to FM_PATCH. The device field is used to
- *	route the patch to the corresponding device.
- *
- *	For wave table use struct patch_info. Initialize the key field
- *      to WAVE_PATCH.
- */
-#define SEQ_PRIVATE		0xfe	/* Low level HW dependent events (8 bytes) */
-#define SEQ_EXTENDED		0xff	/* Extended events (8 bytes) OBSOLETE */
-
-/*
- * Record for FM patches
- */
-
-typedef unsigned char sbi_instr_data[32];
-
-struct sbi_instrument {
-		unsigned short	key;	/* FM_PATCH or OPL3_PATCH */
-#define FM_PATCH	_PATCHKEY(0x01)
-#define OPL3_PATCH	_PATCHKEY(0x03)
-		short		device;		/*	Synth# (0-4)	*/
-		int 		channel;	/*	Program# to be initialized 	*/
-		sbi_instr_data	operators;	/*	Register settings for operator cells (.SBI format)	*/
-	};
-
-struct synth_info {	/* Read only */
-		char	name[30];
-		int	device;		/* 0-N. INITIALIZE BEFORE CALLING */
-		int	synth_type;
-#define SYNTH_TYPE_FM			0
-#define SYNTH_TYPE_SAMPLE		1
-#define SYNTH_TYPE_MIDI			2	/* Midi interface */
-
-		int	synth_subtype;
-#define FM_TYPE_ADLIB			0x00
-#define FM_TYPE_OPL3			0x01
-#define MIDI_TYPE_MPU401		0x401
-
-#define SAMPLE_TYPE_BASIC		0x10
-#define SAMPLE_TYPE_GUS			SAMPLE_TYPE_BASIC
-#define SAMPLE_TYPE_WAVEFRONT           0x11
-
-		int	perc_mode;	/* No longer supported */
-		int	nr_voices;
-		int	nr_drums;	/* Obsolete field */
-		int	instr_bank_size;
-		unsigned int	capabilities;	
-#define SYNTH_CAP_PERCMODE		0x00000001 /* No longer used */
-#define SYNTH_CAP_OPL3			0x00000002 /* Set if OPL3 supported */
-#define SYNTH_CAP_INPUT			0x00000004 /* Input (MIDI) device */
-		int	dummies[19];	/* Reserve space */
-	};
-
-struct sound_timer_info {
-		char name[32];
-		int caps;
-	};
-
-#define MIDI_CAP_MPU401		1		/* MPU-401 intelligent mode */
-
-struct midi_info {
-		char		name[30];
-		int		device;		/* 0-N. INITIALIZE BEFORE CALLING */
-		unsigned int	capabilities;	/* To be defined later */
-		int		dev_type;
-		int		dummies[18];	/* Reserve space */
-	};
-
-/********************************************
- * ioctl commands for the /dev/midi##
- */
-typedef struct {
-		unsigned char cmd;
-		char nr_args, nr_returns;
-		unsigned char data[30];
-	} mpu_command_rec;
-
-#define SNDCTL_MIDI_PRETIME		_SIOWR('m', 0, int)
-#define SNDCTL_MIDI_MPUMODE		_SIOWR('m', 1, int)
-#define SNDCTL_MIDI_MPUCMD		_SIOWR('m', 2, mpu_command_rec)
-
-/********************************************
- * IOCTL commands for /dev/dsp and /dev/audio
- */
-
-#define SNDCTL_DSP_RESET		_SIO  ('P', 0)
-#define SNDCTL_DSP_SYNC			_SIO  ('P', 1)
-#define SNDCTL_DSP_SPEED		_SIOWR('P', 2, int)
-#define SNDCTL_DSP_STEREO		_SIOWR('P', 3, int)
-#define SNDCTL_DSP_GETBLKSIZE		_SIOWR('P', 4, int)
-#define SNDCTL_DSP_SAMPLESIZE		SNDCTL_DSP_SETFMT
-#define SNDCTL_DSP_CHANNELS		_SIOWR('P', 6, int)
-#define SOUND_PCM_WRITE_CHANNELS	SNDCTL_DSP_CHANNELS
-#define SOUND_PCM_WRITE_FILTER		_SIOWR('P', 7, int)
-#define SNDCTL_DSP_POST			_SIO  ('P', 8)
-#define SNDCTL_DSP_SUBDIVIDE		_SIOWR('P', 9, int)
-#define SNDCTL_DSP_SETFRAGMENT		_SIOWR('P',10, int)
-
-/*	Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
-#define SNDCTL_DSP_GETFMTS		_SIOR ('P',11, int) /* Returns a mask */
-#define SNDCTL_DSP_SETFMT		_SIOWR('P',5, int) /* Selects ONE fmt*/
-#	define AFMT_QUERY		0x00000000	/* Return current fmt */
-#	define AFMT_MU_LAW		0x00000001
-#	define AFMT_A_LAW		0x00000002
-#	define AFMT_IMA_ADPCM		0x00000004
-#	define AFMT_U8			0x00000008
-#	define AFMT_S16_LE		0x00000010	/* Little endian signed 16*/
-#	define AFMT_S16_BE		0x00000020	/* Big endian signed 16 */
-#	define AFMT_S8			0x00000040
-#	define AFMT_U16_LE		0x00000080	/* Little endian U16 */
-#	define AFMT_U16_BE		0x00000100	/* Big endian U16 */
-#	define AFMT_MPEG		0x00000200	/* MPEG (2) audio */
-#	define AFMT_AC3		0x00000400	/* Dolby Digital AC3 */
-
-/*
- * Buffer status queries.
- */
-typedef struct audio_buf_info {
-			int fragments;	/* # of available fragments (partially usend ones not counted) */
-			int fragstotal;	/* Total # of fragments allocated */
-			int fragsize;	/* Size of a fragment in bytes */
-
-			int bytes;	/* Available space in bytes (includes partially used fragments) */
-			/* Note! 'bytes' could be more than fragments*fragsize */
-		} audio_buf_info;
-
-#define SNDCTL_DSP_GETOSPACE		_SIOR ('P',12, audio_buf_info)
-#define SNDCTL_DSP_GETISPACE		_SIOR ('P',13, audio_buf_info)
-#define SNDCTL_DSP_NONBLOCK		_SIO  ('P',14)
-#define SNDCTL_DSP_GETCAPS		_SIOR ('P',15, int)
-#	define DSP_CAP_REVISION		0x000000ff	/* Bits for revision level (0 to 255) */
-#	define DSP_CAP_DUPLEX		0x00000100	/* Full duplex record/playback */
-#	define DSP_CAP_REALTIME		0x00000200	/* Real time capability */
-#	define DSP_CAP_BATCH		0x00000400	/* Device has some kind of */
-							/* internal buffers which may */
-							/* cause some delays and */
-							/* decrease precision of timing */
-#	define DSP_CAP_COPROC		0x00000800	/* Has a coprocessor */
-							/* Sometimes it's a DSP */
-							/* but usually not */
-#	define DSP_CAP_TRIGGER		0x00001000	/* Supports SETTRIGGER */
-#	define DSP_CAP_MMAP		0x00002000	/* Supports mmap() */
-#	define DSP_CAP_MULTI		0x00004000	/* support multiple open */
-#	define DSP_CAP_BIND		0x00008000	/* channel binding to front/rear/cneter/lfe */
-
-
-#define SNDCTL_DSP_GETTRIGGER		_SIOR ('P',16, int)
-#define SNDCTL_DSP_SETTRIGGER		_SIOW ('P',16, int)
-#	define PCM_ENABLE_INPUT		0x00000001
-#	define PCM_ENABLE_OUTPUT		0x00000002
-
-typedef struct count_info {
-		int bytes;	/* Total # of bytes processed */
-		int blocks;	/* # of fragment transitions since last time */
-		int ptr;	/* Current DMA pointer value */
-	} count_info;
-
-#define SNDCTL_DSP_GETIPTR		_SIOR ('P',17, count_info)
-#define SNDCTL_DSP_GETOPTR		_SIOR ('P',18, count_info)
-
-typedef struct buffmem_desc {
-		unsigned *buffer;
-		int size;
-	} buffmem_desc;
-#define SNDCTL_DSP_MAPINBUF		_SIOR ('P', 19, buffmem_desc)
-#define SNDCTL_DSP_MAPOUTBUF		_SIOR ('P', 20, buffmem_desc)
-#define SNDCTL_DSP_SETSYNCRO		_SIO  ('P', 21)
-#define SNDCTL_DSP_SETDUPLEX		_SIO  ('P', 22)
-#define SNDCTL_DSP_GETODELAY		_SIOR ('P', 23, int)
-
-#define SNDCTL_DSP_GETCHANNELMASK		_SIOWR('P', 64, int)
-#define SNDCTL_DSP_BIND_CHANNEL		_SIOWR('P', 65, int)
-#	define DSP_BIND_QUERY		0x00000000
-#	define DSP_BIND_FRONT		0x00000001
-#	define DSP_BIND_SURR		0x00000002
-#	define DSP_BIND_CENTER_LFE	0x00000004
-#	define DSP_BIND_HANDSET		0x00000008
-#	define DSP_BIND_MIC		0x00000010
-#	define DSP_BIND_MODEM1		0x00000020
-#	define DSP_BIND_MODEM2		0x00000040
-#	define DSP_BIND_I2S		0x00000080
-#	define DSP_BIND_SPDIF		0x00000100
-
-#define SNDCTL_DSP_SETSPDIF		_SIOW ('P', 66, int)
-#define SNDCTL_DSP_GETSPDIF		_SIOR ('P', 67, int)
-#	define SPDIF_PRO	0x0001
-#	define SPDIF_N_AUD	0x0002
-#	define SPDIF_COPY	0x0004
-#	define SPDIF_PRE	0x0008
-#	define SPDIF_CC		0x07f0
-#	define SPDIF_L		0x0800
-#	define SPDIF_DRS	0x4000
-#	define SPDIF_V		0x8000
-
-/*
- * Application's profile defines the way how playback underrun situations should be handled.
- * 
- *	APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
- *	playback buffer whenever an underrun occurs. This consumes some time
- *	prevents looping the existing buffer.
- *	APF_CPUINTENS is intended to be set by CPU intensive applications which
- *	are likely to run out of time occasionally. In this mode the buffer cleanup is
- *	disabled which saves CPU time but also let's the previous buffer content to
- *	be played during the "pause" after the underrun.
- */
-#define SNDCTL_DSP_PROFILE		_SIOW ('P', 23, int)
-#define	  APF_NORMAL	0	/* Normal applications */
-#define	  APF_NETWORK	1	/* Underruns probably caused by an "external" delay */
-#define   APF_CPUINTENS 2	/* Underruns probably caused by "overheating" the CPU */
-
-#define SOUND_PCM_READ_RATE		_SIOR ('P', 2, int)
-#define SOUND_PCM_READ_CHANNELS		_SIOR ('P', 6, int)
-#define SOUND_PCM_READ_BITS		_SIOR ('P', 5, int)
-#define SOUND_PCM_READ_FILTER		_SIOR ('P', 7, int)
-
-/* Some alias names */
-#define SOUND_PCM_WRITE_BITS		SNDCTL_DSP_SETFMT
-#define SOUND_PCM_WRITE_RATE		SNDCTL_DSP_SPEED
-#define SOUND_PCM_POST			SNDCTL_DSP_POST
-#define SOUND_PCM_RESET			SNDCTL_DSP_RESET
-#define SOUND_PCM_SYNC			SNDCTL_DSP_SYNC
-#define SOUND_PCM_SUBDIVIDE		SNDCTL_DSP_SUBDIVIDE
-#define SOUND_PCM_SETFRAGMENT		SNDCTL_DSP_SETFRAGMENT
-#define SOUND_PCM_GETFMTS		SNDCTL_DSP_GETFMTS
-#define SOUND_PCM_SETFMT		SNDCTL_DSP_SETFMT
-#define SOUND_PCM_GETOSPACE		SNDCTL_DSP_GETOSPACE
-#define SOUND_PCM_GETISPACE		SNDCTL_DSP_GETISPACE
-#define SOUND_PCM_NONBLOCK		SNDCTL_DSP_NONBLOCK
-#define SOUND_PCM_GETCAPS		SNDCTL_DSP_GETCAPS
-#define SOUND_PCM_GETTRIGGER		SNDCTL_DSP_GETTRIGGER
-#define SOUND_PCM_SETTRIGGER		SNDCTL_DSP_SETTRIGGER
-#define SOUND_PCM_SETSYNCRO		SNDCTL_DSP_SETSYNCRO
-#define SOUND_PCM_GETIPTR		SNDCTL_DSP_GETIPTR
-#define SOUND_PCM_GETOPTR		SNDCTL_DSP_GETOPTR
-#define SOUND_PCM_MAPINBUF		SNDCTL_DSP_MAPINBUF
-#define SOUND_PCM_MAPOUTBUF		SNDCTL_DSP_MAPOUTBUF
-
-/*
- * ioctl calls to be used in communication with coprocessors and
- * DSP chips.
- */
-
-typedef struct copr_buffer {
-		int command;	/* Set to 0 if not used */
-		int flags;
-#define CPF_NONE		0x0000
-#define CPF_FIRST		0x0001	/* First block */
-#define CPF_LAST		0x0002	/* Last block */
-		int len;
-		int offs;	/* If required by the device (0 if not used) */
-
-		unsigned char data[4000]; /* NOTE! 4000 is not 4k */
-	} copr_buffer;
-
-typedef struct copr_debug_buf {
-		int command;	/* Used internally. Set to 0 */
-		int parm1;
-		int parm2;
-		int flags;	
-		int len;	/* Length of data in bytes */
-	} copr_debug_buf;
-
-typedef struct copr_msg {
-		int len;
-		unsigned char data[4000];
-	} copr_msg;
-
-#define SNDCTL_COPR_RESET             _SIO  ('C',  0)
-#define SNDCTL_COPR_LOAD	      _SIOWR('C',  1, copr_buffer)
-#define SNDCTL_COPR_RDATA	      _SIOWR('C',  2, copr_debug_buf)
-#define SNDCTL_COPR_RCODE	      _SIOWR('C',  3, copr_debug_buf)
-#define SNDCTL_COPR_WDATA	      _SIOW ('C',  4, copr_debug_buf)
-#define SNDCTL_COPR_WCODE	      _SIOW ('C',  5, copr_debug_buf)
-#define SNDCTL_COPR_RUN		      _SIOWR('C',  6, copr_debug_buf)
-#define SNDCTL_COPR_HALT	      _SIOWR('C',  7, copr_debug_buf)
-#define SNDCTL_COPR_SENDMSG	      _SIOWR('C',  8, copr_msg)
-#define SNDCTL_COPR_RCVMSG	      _SIOR ('C',  9, copr_msg)
-
-/*********************************************
- * IOCTL commands for /dev/mixer
- */
-	
-/* 
- * Mixer devices
- *
- * There can be up to 20 different analog mixer channels. The
- * SOUND_MIXER_NRDEVICES gives the currently supported maximum. 
- * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
- * the devices supported by the particular mixer.
- */
-
-#define SOUND_MIXER_NRDEVICES	25
-#define SOUND_MIXER_VOLUME	0
-#define SOUND_MIXER_BASS	1
-#define SOUND_MIXER_TREBLE	2
-#define SOUND_MIXER_SYNTH	3
-#define SOUND_MIXER_PCM		4
-#define SOUND_MIXER_SPEAKER	5
-#define SOUND_MIXER_LINE	6
-#define SOUND_MIXER_MIC		7
-#define SOUND_MIXER_CD		8
-#define SOUND_MIXER_IMIX	9	/*  Recording monitor  */
-#define SOUND_MIXER_ALTPCM	10
-#define SOUND_MIXER_RECLEV	11	/* Recording level */
-#define SOUND_MIXER_IGAIN	12	/* Input gain */
-#define SOUND_MIXER_OGAIN	13	/* Output gain */
-/* 
- * The AD1848 codec and compatibles have three line level inputs
- * (line, aux1 and aux2). Since each card manufacturer have assigned
- * different meanings to these inputs, it's inpractical to assign
- * specific meanings (line, cd, synth etc.) to them.
- */
-#define SOUND_MIXER_LINE1	14	/* Input source 1  (aux1) */
-#define SOUND_MIXER_LINE2	15	/* Input source 2  (aux2) */
-#define SOUND_MIXER_LINE3	16	/* Input source 3  (line) */
-#define SOUND_MIXER_DIGITAL1	17	/* Digital (input) 1 */
-#define SOUND_MIXER_DIGITAL2	18	/* Digital (input) 2 */
-#define SOUND_MIXER_DIGITAL3	19	/* Digital (input) 3 */
-#define SOUND_MIXER_PHONEIN	20	/* Phone input */
-#define SOUND_MIXER_PHONEOUT	21	/* Phone output */
-#define SOUND_MIXER_VIDEO	22	/* Video/TV (audio) in */
-#define SOUND_MIXER_RADIO	23	/* Radio in */
-#define SOUND_MIXER_MONITOR	24	/* Monitor (usually mic) volume */
-
-/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
-/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
-#define SOUND_ONOFF_MIN		28
-#define SOUND_ONOFF_MAX		30
-
-/* Note!	Number 31 cannot be used since the sign bit is reserved */
-#define SOUND_MIXER_NONE	31
-
-/*
- * The following unsupported macros are no longer functional.
- * Use SOUND_MIXER_PRIVATE# macros in future.
- */
-#define SOUND_MIXER_ENHANCE	SOUND_MIXER_NONE
-#define SOUND_MIXER_MUTE	SOUND_MIXER_NONE
-#define SOUND_MIXER_LOUD	SOUND_MIXER_NONE
-
-
-#define SOUND_DEVICE_LABELS	{"Vol  ", "Bass ", "Trebl", "Synth", "Pcm  ", "Spkr ", "Line ", \
-				 "Mic  ", "CD   ", "Mix  ", "Pcm2 ", "Rec  ", "IGain", "OGain", \
-				 "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
-				 "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
-
-#define SOUND_DEVICE_NAMES	{"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
-				 "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
-				 "line1", "line2", "line3", "dig1", "dig2", "dig3", \
-				 "phin", "phout", "video", "radio", "monitor"}
-
-/*	Device bitmask identifiers	*/
-
-#define SOUND_MIXER_RECSRC	0xff	/* Arg contains a bit for each recording source */
-#define SOUND_MIXER_DEVMASK	0xfe	/* Arg contains a bit for each supported device */
-#define SOUND_MIXER_RECMASK	0xfd	/* Arg contains a bit for each supported recording source */
-#define SOUND_MIXER_CAPS	0xfc
-#	define SOUND_CAP_EXCL_INPUT	0x00000001	/* Only one recording source at a time */
-#define SOUND_MIXER_STEREODEVS	0xfb	/* Mixer channels supporting stereo */
-#define SOUND_MIXER_OUTSRC	0xfa	/* Arg contains a bit for each input source to output */
-#define SOUND_MIXER_OUTMASK	0xf9	/* Arg contains a bit for each supported input source to output */
-
-/*	Device mask bits	*/
-
-#define SOUND_MASK_VOLUME	(1 << SOUND_MIXER_VOLUME)
-#define SOUND_MASK_BASS		(1 << SOUND_MIXER_BASS)
-#define SOUND_MASK_TREBLE	(1 << SOUND_MIXER_TREBLE)
-#define SOUND_MASK_SYNTH	(1 << SOUND_MIXER_SYNTH)
-#define SOUND_MASK_PCM		(1 << SOUND_MIXER_PCM)
-#define SOUND_MASK_SPEAKER	(1 << SOUND_MIXER_SPEAKER)
-#define SOUND_MASK_LINE		(1 << SOUND_MIXER_LINE)
-#define SOUND_MASK_MIC		(1 << SOUND_MIXER_MIC)
-#define SOUND_MASK_CD		(1 << SOUND_MIXER_CD)
-#define SOUND_MASK_IMIX		(1 << SOUND_MIXER_IMIX)
-#define SOUND_MASK_ALTPCM	(1 << SOUND_MIXER_ALTPCM)
-#define SOUND_MASK_RECLEV	(1 << SOUND_MIXER_RECLEV)
-#define SOUND_MASK_IGAIN	(1 << SOUND_MIXER_IGAIN)
-#define SOUND_MASK_OGAIN	(1 << SOUND_MIXER_OGAIN)
-#define SOUND_MASK_LINE1	(1 << SOUND_MIXER_LINE1)
-#define SOUND_MASK_LINE2	(1 << SOUND_MIXER_LINE2)
-#define SOUND_MASK_LINE3	(1 << SOUND_MIXER_LINE3)
-#define SOUND_MASK_DIGITAL1	(1 << SOUND_MIXER_DIGITAL1)
-#define SOUND_MASK_DIGITAL2	(1 << SOUND_MIXER_DIGITAL2)
-#define SOUND_MASK_DIGITAL3	(1 << SOUND_MIXER_DIGITAL3)
-#define SOUND_MASK_PHONEIN	(1 << SOUND_MIXER_PHONEIN)
-#define SOUND_MASK_PHONEOUT	(1 << SOUND_MIXER_PHONEOUT)
-#define SOUND_MASK_RADIO	(1 << SOUND_MIXER_RADIO)
-#define SOUND_MASK_VIDEO	(1 << SOUND_MIXER_VIDEO)
-#define SOUND_MASK_MONITOR	(1 << SOUND_MIXER_MONITOR)
-
-/* Obsolete macros */
-#define SOUND_MASK_MUTE		(1 << SOUND_MIXER_MUTE)
-#define SOUND_MASK_ENHANCE	(1 << SOUND_MIXER_ENHANCE)
-#define SOUND_MASK_LOUD		(1 << SOUND_MIXER_LOUD)
-
-#define MIXER_READ(dev)		_SIOR('M', dev, int)
-#define SOUND_MIXER_READ_VOLUME		MIXER_READ(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_READ_BASS		MIXER_READ(SOUND_MIXER_BASS)
-#define SOUND_MIXER_READ_TREBLE		MIXER_READ(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_READ_SYNTH		MIXER_READ(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_READ_PCM		MIXER_READ(SOUND_MIXER_PCM)
-#define SOUND_MIXER_READ_SPEAKER	MIXER_READ(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_READ_LINE		MIXER_READ(SOUND_MIXER_LINE)
-#define SOUND_MIXER_READ_MIC		MIXER_READ(SOUND_MIXER_MIC)
-#define SOUND_MIXER_READ_CD		MIXER_READ(SOUND_MIXER_CD)
-#define SOUND_MIXER_READ_IMIX		MIXER_READ(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_READ_ALTPCM		MIXER_READ(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_READ_RECLEV		MIXER_READ(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_READ_IGAIN		MIXER_READ(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_READ_OGAIN		MIXER_READ(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_READ_LINE1		MIXER_READ(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_READ_LINE2		MIXER_READ(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_READ_LINE3		MIXER_READ(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_READ_MUTE		MIXER_READ(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_READ_ENHANCE	MIXER_READ(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_READ_LOUD		MIXER_READ(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_READ_RECSRC		MIXER_READ(SOUND_MIXER_RECSRC)
-#define SOUND_MIXER_READ_DEVMASK	MIXER_READ(SOUND_MIXER_DEVMASK)
-#define SOUND_MIXER_READ_RECMASK	MIXER_READ(SOUND_MIXER_RECMASK)
-#define SOUND_MIXER_READ_STEREODEVS	MIXER_READ(SOUND_MIXER_STEREODEVS)
-#define SOUND_MIXER_READ_CAPS		MIXER_READ(SOUND_MIXER_CAPS)
-
-#define MIXER_WRITE(dev)		_SIOWR('M', dev, int)
-#define SOUND_MIXER_WRITE_VOLUME	MIXER_WRITE(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_WRITE_BASS		MIXER_WRITE(SOUND_MIXER_BASS)
-#define SOUND_MIXER_WRITE_TREBLE	MIXER_WRITE(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_WRITE_SYNTH		MIXER_WRITE(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_WRITE_PCM		MIXER_WRITE(SOUND_MIXER_PCM)
-#define SOUND_MIXER_WRITE_SPEAKER	MIXER_WRITE(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_WRITE_LINE		MIXER_WRITE(SOUND_MIXER_LINE)
-#define SOUND_MIXER_WRITE_MIC		MIXER_WRITE(SOUND_MIXER_MIC)
-#define SOUND_MIXER_WRITE_CD		MIXER_WRITE(SOUND_MIXER_CD)
-#define SOUND_MIXER_WRITE_IMIX		MIXER_WRITE(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_WRITE_ALTPCM	MIXER_WRITE(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_WRITE_RECLEV	MIXER_WRITE(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_WRITE_IGAIN		MIXER_WRITE(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_WRITE_OGAIN		MIXER_WRITE(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_WRITE_LINE1		MIXER_WRITE(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_WRITE_LINE2		MIXER_WRITE(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_WRITE_LINE3		MIXER_WRITE(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_WRITE_MUTE		MIXER_WRITE(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_WRITE_ENHANCE	MIXER_WRITE(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_WRITE_LOUD		MIXER_WRITE(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_WRITE_RECSRC	MIXER_WRITE(SOUND_MIXER_RECSRC)
-
-typedef struct mixer_info
-{
-  char id[16];
-  char name[32];
-  int  modify_counter;
-  int fillers[10];
-} mixer_info;
-
-typedef struct _old_mixer_info /* Obsolete */
-{
-  char id[16];
-  char name[32];
-} _old_mixer_info;
-
-#define SOUND_MIXER_INFO		_SIOR ('M', 101, mixer_info)
-#define SOUND_OLD_MIXER_INFO		_SIOR ('M', 101, _old_mixer_info)
-
-/*
- * A mechanism for accessing "proprietary" mixer features. This method
- * permits passing 128 bytes of arbitrary data between a mixer application
- * and the mixer driver. Interpretation of the record is defined by
- * the particular mixer driver.
- */
-typedef unsigned char mixer_record[128];
-
-#define SOUND_MIXER_ACCESS		_SIOWR('M', 102, mixer_record)
-
-/*
- * Two ioctls for special souncard function
- */
-#define SOUND_MIXER_AGC  _SIOWR('M', 103, int)
-#define SOUND_MIXER_3DSE  _SIOWR('M', 104, int)
-
-/*
- * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
- * These features can be used when accessing device specific features.
- */
-#define SOUND_MIXER_PRIVATE1		_SIOWR('M', 111, int)
-#define SOUND_MIXER_PRIVATE2		_SIOWR('M', 112, int)
-#define SOUND_MIXER_PRIVATE3		_SIOWR('M', 113, int)
-#define SOUND_MIXER_PRIVATE4		_SIOWR('M', 114, int)
-#define SOUND_MIXER_PRIVATE5		_SIOWR('M', 115, int)
-
-/*
- * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
- * for querying current mixer settings from the driver and for loading
- * default volume settings _prior_ activating the mixer (loading
- * doesn't affect current state of the mixer hardware). These calls
- * are for internal use only.
- */
-
-typedef struct mixer_vol_table {
-  int num;	/* Index to volume table */
-  char name[32];
-  int levels[32];
-} mixer_vol_table;
-
-#define SOUND_MIXER_GETLEVELS		_SIOWR('M', 116, mixer_vol_table)
-#define SOUND_MIXER_SETLEVELS		_SIOWR('M', 117, mixer_vol_table)
-
-/* 
- * An ioctl for identifying the driver version. It will return value
- * of the SOUND_VERSION macro used when compiling the driver.
- * This call was introduced in OSS version 3.6 and it will not work
- * with earlier versions (returns EINVAL).
- */
-#define OSS_GETVERSION			_SIOR ('M', 118, int)
-
-/*
- * Level 2 event types for /dev/sequencer
- */
-
-/*
- * The 4 most significant bits of byte 0 specify the class of
- * the event: 
- *
- *	0x8X = system level events,
- *	0x9X = device/port specific events, event[1] = device/port,
- *		The last 4 bits give the subtype:
- *			0x02	= Channel event (event[3] = chn).
- *			0x01	= note event (event[4] = note).
- *			(0x01 is not used alone but always with bit 0x02).
- *	       event[2] = MIDI message code (0x80=note off etc.)
- *
- */
-
-#define EV_SEQ_LOCAL		0x80
-#define EV_TIMING		0x81
-#define EV_CHN_COMMON		0x92
-#define EV_CHN_VOICE		0x93
-#define EV_SYSEX		0x94
-/*
- * Event types 200 to 220 are reserved for application use.
- * These numbers will not be used by the driver.
- */
-
-/*
- * Events for event type EV_CHN_VOICE
- */
-
-#define MIDI_NOTEOFF		0x80
-#define MIDI_NOTEON		0x90
-#define MIDI_KEY_PRESSURE	0xA0
-
-/*
- * Events for event type EV_CHN_COMMON
- */
-
-#define MIDI_CTL_CHANGE		0xB0
-#define MIDI_PGM_CHANGE		0xC0
-#define MIDI_CHN_PRESSURE	0xD0
-#define MIDI_PITCH_BEND		0xE0
-
-#define MIDI_SYSTEM_PREFIX	0xF0
-
-/*
- * Timer event types
- */
-#define TMR_WAIT_REL		1	/* Time relative to the prev time */
-#define TMR_WAIT_ABS		2	/* Absolute time since TMR_START */
-#define TMR_STOP		3
-#define TMR_START		4
-#define TMR_CONTINUE		5
-#define TMR_TEMPO		6
-#define TMR_ECHO		8
-#define TMR_CLOCK		9	/* MIDI clock */
-#define TMR_SPP			10	/* Song position pointer */
-#define TMR_TIMESIG		11	/* Time signature */
-
-/*
- *	Local event types
- */
-#define LOCL_STARTAUDIO		1
-
-#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
-/*
- *	Some convenience macros to simplify programming of the
- *	/dev/sequencer interface
- *
- *	This is a legacy interface for applications written against
- *	the OSSlib-3.8 style interface. It is no longer possible
- *	to actually link against OSSlib with this header, but we
- *	still provide these macros for programs using them.
- *
- *	If you want to use OSSlib, it is recommended that you get
- *	the GPL version of OSS-4.x and build against that version
- *	of the header.
- *
- *	We redefine the extern keyword so that make headers_check
- *	does not complain about SEQ_USE_EXTBUF.
- */
-#define SEQ_DECLAREBUF()		SEQ_USE_EXTBUF()
-
-void seqbuf_dump(void);	/* This function must be provided by programs */
-
-#define SEQ_PM_DEFINES int __foo_bar___
-
-#define SEQ_LOAD_GMINSTR(dev, instr)
-#define SEQ_LOAD_GMDRUM(dev, drum)
-
-#define _SEQ_EXTERN extern
-#define SEQ_USE_EXTBUF() \
-		_SEQ_EXTERN unsigned char _seqbuf[]; \
-		_SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
-
-#ifndef USE_SIMPLE_MACROS
-/* Sample seqbuf_dump() implementation:
- *
- *	SEQ_DEFINEBUF (2048);	-- Defines a buffer for 2048 bytes
- *
- *	int seqfd;		-- The file descriptor for /dev/sequencer.
- *
- *	void
- *	seqbuf_dump ()
- *	{
- *	  if (_seqbufptr)
- *	    if (write (seqfd, _seqbuf, _seqbufptr) == -1)
- *	      {
- *		perror ("write /dev/sequencer");
- *		exit (-1);
- *	      }
- *	  _seqbufptr = 0;
- *	}
- */
-
-#define SEQ_DEFINEBUF(len)		unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
-#define _SEQ_NEEDBUF(len)		if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
-#define _SEQ_ADVBUF(len)		_seqbufptr += len
-#define SEQ_DUMPBUF			seqbuf_dump
-#else
-/*
- * This variation of the sequencer macros is used just to format one event
- * using fixed buffer.
- * 
- * The program using the macro library must define the following macros before
- * using this library.
- *
- * #define _seqbuf 		 name of the buffer (unsigned char[]) 
- * #define _SEQ_ADVBUF(len)	 If the applic needs to know the exact
- *				 size of the event, this macro can be used.
- *				 Otherwise this must be defined as empty.
- * #define _seqbufptr		 Define the name of index variable or 0 if
- *				 not required. 
- */
-#define _SEQ_NEEDBUF(len)	/* empty */
-#endif
-
-#define SEQ_VOLUME_MODE(dev, mode)	{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
-					_seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
-					_seqbuf[_seqbufptr+2] = (dev);\
-					_seqbuf[_seqbufptr+3] = (mode);\
-					_seqbuf[_seqbufptr+4] = 0;\
-					_seqbuf[_seqbufptr+5] = 0;\
-					_seqbuf[_seqbufptr+6] = 0;\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-
-/*
- * Midi voice messages
- */
-
-#define _CHN_VOICE(dev, event, chn, note, parm) \
-					{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_CHN_VOICE;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					_seqbuf[_seqbufptr+2] = (event);\
-					_seqbuf[_seqbufptr+3] = (chn);\
-					_seqbuf[_seqbufptr+4] = (note);\
-					_seqbuf[_seqbufptr+5] = (parm);\
-					_seqbuf[_seqbufptr+6] = (0);\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_START_NOTE(dev, chn, note, vol) \
-		_CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
-
-#define SEQ_STOP_NOTE(dev, chn, note, vol) \
-		_CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
-
-#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
-		_CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
-
-/*
- * Midi channel messages
- */
-
-#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
-					{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_CHN_COMMON;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					_seqbuf[_seqbufptr+2] = (event);\
-					_seqbuf[_seqbufptr+3] = (chn);\
-					_seqbuf[_seqbufptr+4] = (p1);\
-					_seqbuf[_seqbufptr+5] = (p2);\
-					*(short *)&_seqbuf[_seqbufptr+6] = (w14);\
-					_SEQ_ADVBUF(8);}
-/*
- * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
- * sending any MIDI bytes but it's absolutely not possible. Trying to do
- * so _will_ cause problems with MPU401 intelligent mode).
- *
- * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be 
- * sent by calling SEQ_SYSEX() several times (there must be no other events
- * between them). First sysex fragment must have 0xf0 in the first byte
- * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
- * between these sysex start and end markers cannot be larger than 0x7f. Also
- * lengths of each fragments (except the last one) must be 6.
- *
- * Breaking the above rules may work with some MIDI ports but is likely to
- * cause fatal problems with some other devices (such as MPU401).
- */
-#define SEQ_SYSEX(dev, buf, len) \
-					{int ii, ll=(len); \
-					 unsigned char *bufp=buf;\
-					 if (ll>6)ll=6;\
-					_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_SYSEX;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					for(ii=0;ii<ll;ii++)\
-					   _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
-					for(ii=ll;ii<6;ii++)\
-					   _seqbuf[_seqbufptr+ii+2] = 0xff;\
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
-		_CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
-
-#define SEQ_SET_PATCH SEQ_PGM_CHANGE
-#define SEQ_PGM_CHANGE(dev, chn, patch) \
-		_CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
-
-#define SEQ_CONTROL(dev, chn, controller, value) \
-		_CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
-
-#define SEQ_BENDER(dev, chn, value) \
-		_CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
-
-
-#define SEQ_V2_X_CONTROL(dev, voice, controller, value)	{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
-					_seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
-					_seqbuf[_seqbufptr+2] = (dev);\
-					_seqbuf[_seqbufptr+3] = (voice);\
-					_seqbuf[_seqbufptr+4] = (controller);\
-					_seqbuf[_seqbufptr+5] = ((value)&0xff);\
-					_seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-/*
- * The following 5 macros are incorrectly implemented and obsolete.
- * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
- */
-#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
-#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
-#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
-#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
-#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
-
-/*
- * Timing and synchronization macros
- */
-
-#define _TIMER_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
-				 	_seqbuf[_seqbufptr+0] = EV_TIMING; \
-				 	_seqbuf[_seqbufptr+1] = (ev); \
-					_seqbuf[_seqbufptr+2] = 0;\
-					_seqbuf[_seqbufptr+3] = 0;\
-				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_START_TIMER()		_TIMER_EVENT(TMR_START, 0)
-#define SEQ_STOP_TIMER()		_TIMER_EVENT(TMR_STOP, 0)
-#define SEQ_CONTINUE_TIMER()		_TIMER_EVENT(TMR_CONTINUE, 0)
-#define SEQ_WAIT_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_ABS, ticks)
-#define SEQ_DELTA_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_REL, ticks)
-#define SEQ_ECHO_BACK(key)		_TIMER_EVENT(TMR_ECHO, key)
-#define SEQ_SET_TEMPO(value)		_TIMER_EVENT(TMR_TEMPO, value)
-#define SEQ_SONGPOS(pos)		_TIMER_EVENT(TMR_SPP, pos)
-#define SEQ_TIME_SIGNATURE(sig)		_TIMER_EVENT(TMR_TIMESIG, sig)
-
-/*
- * Local control events
- */
-
-#define _LOCAL_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
-				 	_seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
-				 	_seqbuf[_seqbufptr+1] = (ev); \
-					_seqbuf[_seqbufptr+2] = 0;\
-					_seqbuf[_seqbufptr+3] = 0;\
-				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_PLAYAUDIO(devmask)		_LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
-/*
- * Events for the level 1 interface only 
- */
-
-#define SEQ_MIDIOUT(device, byte)	{_SEQ_NEEDBUF(4);\
-					_seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
-					_seqbuf[_seqbufptr+1] = (byte);\
-					_seqbuf[_seqbufptr+2] = (device);\
-					_seqbuf[_seqbufptr+3] = 0;\
-					_SEQ_ADVBUF(4);}
-
-/*
- * Patch loading.
- */
-#define SEQ_WRPATCH(patchx, len) \
-		{if (_seqbufptr) SEQ_DUMPBUF();\
-		 if (write(seqfd, (char*)(patchx), len)==-1) \
-		    perror("Write patch: /dev/sequencer");}
-#define SEQ_WRPATCH2(patchx, len) \
-		(SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
-
-#endif
 #endif
diff --git a/include/linux/stat.h b/include/linux/stat.h
index 46132409a3f7..075cb0c7eb2a 100644
--- a/include/linux/stat.h
+++ b/include/linux/stat.h
@@ -1,52 +1,10 @@
 #ifndef _LINUX_STAT_H
 #define _LINUX_STAT_H
 
-#ifdef __KERNEL__
 
 #include <asm/stat.h>
+#include <uapi/linux/stat.h>
 
-#endif
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#define S_IFMT  00170000
-#define S_IFSOCK 0140000
-#define S_IFLNK	 0120000
-#define S_IFREG  0100000
-#define S_IFBLK  0060000
-#define S_IFDIR  0040000
-#define S_IFCHR  0020000
-#define S_IFIFO  0010000
-#define S_ISUID  0004000
-#define S_ISGID  0002000
-#define S_ISVTX  0001000
-
-#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
-#define S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
-#define S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
-#define S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
-#define S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
-#define S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
-#define S_ISSOCK(m)	(((m) & S_IFMT) == S_IFSOCK)
-
-#define S_IRWXU 00700
-#define S_IRUSR 00400
-#define S_IWUSR 00200
-#define S_IXUSR 00100
-
-#define S_IRWXG 00070
-#define S_IRGRP 00040
-#define S_IWGRP 00020
-#define S_IXGRP 00010
-
-#define S_IRWXO 00007
-#define S_IROTH 00004
-#define S_IWOTH 00002
-#define S_IXOTH 00001
-
-#endif
-
-#ifdef __KERNEL__
 #define S_IRWXUGO	(S_IRWXU|S_IRWXG|S_IRWXO)
 #define S_IALLUGO	(S_ISUID|S_ISGID|S_ISVTX|S_IRWXUGO)
 #define S_IRUGO		(S_IRUSR|S_IRGRP|S_IROTH)
@@ -77,5 +35,3 @@ struct kstat {
 };
 
 #endif
-
-#endif
diff --git a/include/linux/stddef.h b/include/linux/stddef.h
index 1747b6787b9e..f4aec0e75c3a 100644
--- a/include/linux/stddef.h
+++ b/include/linux/stddef.h
@@ -1,9 +1,8 @@
 #ifndef _LINUX_STDDEF_H
 #define _LINUX_STDDEF_H
 
-#include <linux/compiler.h>
+#include <uapi/linux/stddef.h>
 
-#ifdef __KERNEL__
 
 #undef NULL
 #define NULL ((void *)0)
@@ -19,6 +18,4 @@ enum {
 #else
 #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
 #endif
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/string.h b/include/linux/string.h
index b9178812d9df..630125818ca8 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -1,16 +1,12 @@
 #ifndef _LINUX_STRING_H_
 #define _LINUX_STRING_H_
 
-/* We don't want strings.h stuff being used by user stuff by accident */
-
-#ifndef __KERNEL__
-#include <string.h>
-#else
 
 #include <linux/compiler.h>	/* for inline */
 #include <linux/types.h>	/* for size_t */
 #include <linux/stddef.h>	/* for NULL */
 #include <stdarg.h>
+#include <uapi/linux/string.h>
 
 extern char *strndup_user(const char __user *, long);
 extern void *memdup_user(const void __user *, size_t);
@@ -147,5 +143,4 @@ static inline bool strstarts(const char *str, const char *prefix)
 
 extern size_t memweight(const void *ptr, size_t bytes);
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/suspend_ioctls.h b/include/linux/suspend_ioctls.h
deleted file mode 100644
index 0b30382984fe..000000000000
--- a/include/linux/suspend_ioctls.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _LINUX_SUSPEND_IOCTLS_H
-#define _LINUX_SUSPEND_IOCTLS_H
-
-#include <linux/types.h>
-/*
- * This structure is used to pass the values needed for the identification
- * of the resume swap area from a user space to the kernel via the
- * SNAPSHOT_SET_SWAP_AREA ioctl
- */
-struct resume_swap_area {
-	__kernel_loff_t offset;
-	__u32 dev;
-} __attribute__((packed));
-
-#define SNAPSHOT_IOC_MAGIC	'3'
-#define SNAPSHOT_FREEZE			_IO(SNAPSHOT_IOC_MAGIC, 1)
-#define SNAPSHOT_UNFREEZE		_IO(SNAPSHOT_IOC_MAGIC, 2)
-#define SNAPSHOT_ATOMIC_RESTORE		_IO(SNAPSHOT_IOC_MAGIC, 4)
-#define SNAPSHOT_FREE			_IO(SNAPSHOT_IOC_MAGIC, 5)
-#define SNAPSHOT_FREE_SWAP_PAGES	_IO(SNAPSHOT_IOC_MAGIC, 9)
-#define SNAPSHOT_S2RAM			_IO(SNAPSHOT_IOC_MAGIC, 11)
-#define SNAPSHOT_SET_SWAP_AREA		_IOW(SNAPSHOT_IOC_MAGIC, 13, \
-							struct resume_swap_area)
-#define SNAPSHOT_GET_IMAGE_SIZE		_IOR(SNAPSHOT_IOC_MAGIC, 14, __kernel_loff_t)
-#define SNAPSHOT_PLATFORM_SUPPORT	_IO(SNAPSHOT_IOC_MAGIC, 15)
-#define SNAPSHOT_POWER_OFF		_IO(SNAPSHOT_IOC_MAGIC, 16)
-#define SNAPSHOT_CREATE_IMAGE		_IOW(SNAPSHOT_IOC_MAGIC, 17, int)
-#define SNAPSHOT_PREF_IMAGE_SIZE	_IO(SNAPSHOT_IOC_MAGIC, 18)
-#define SNAPSHOT_AVAIL_SWAP_SIZE	_IOR(SNAPSHOT_IOC_MAGIC, 19, __kernel_loff_t)
-#define SNAPSHOT_ALLOC_SWAP_PAGE	_IOR(SNAPSHOT_IOC_MAGIC, 20, __kernel_loff_t)
-#define SNAPSHOT_IOC_MAXNR	20
-
-#endif /* _LINUX_SUSPEND_IOCTLS_H */
diff --git a/include/linux/swab.h b/include/linux/swab.h
index ea0c02fd5163..9ad3c60f6cae 100644
--- a/include/linux/swab.h
+++ b/include/linux/swab.h
@@ -1,284 +1,8 @@
 #ifndef _LINUX_SWAB_H
 #define _LINUX_SWAB_H
 
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <asm/swab.h>
+#include <uapi/linux/swab.h>
 
-/*
- * casts are necessary for constants, because we never know how for sure
- * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
- */
-#define ___constant_swab16(x) ((__u16)(				\
-	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
-	(((__u16)(x) & (__u16)0xff00U) >> 8)))
-
-#define ___constant_swab32(x) ((__u32)(				\
-	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
-	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
-	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
-	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
-
-#define ___constant_swab64(x) ((__u64)(				\
-	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
-	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
-	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
-	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
-	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
-	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
-	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
-	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
-
-#define ___constant_swahw32(x) ((__u32)(			\
-	(((__u32)(x) & (__u32)0x0000ffffUL) << 16) |		\
-	(((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
-
-#define ___constant_swahb32(x) ((__u32)(			\
-	(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) |		\
-	(((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
-
-/*
- * Implement the following as inlines, but define the interface using
- * macros to allow constant folding when possible:
- * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
- */
-
-static inline __attribute_const__ __u16 __fswab16(__u16 val)
-{
-#ifdef __arch_swab16
-	return __arch_swab16(val);
-#else
-	return ___constant_swab16(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswab32(__u32 val)
-{
-#ifdef __arch_swab32
-	return __arch_swab32(val);
-#else
-	return ___constant_swab32(val);
-#endif
-}
-
-static inline __attribute_const__ __u64 __fswab64(__u64 val)
-{
-#ifdef __arch_swab64
-	return __arch_swab64(val);
-#elif defined(__SWAB_64_THRU_32__)
-	__u32 h = val >> 32;
-	__u32 l = val & ((1ULL << 32) - 1);
-	return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
-#else
-	return ___constant_swab64(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahw32(__u32 val)
-{
-#ifdef __arch_swahw32
-	return __arch_swahw32(val);
-#else
-	return ___constant_swahw32(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahb32(__u32 val)
-{
-#ifdef __arch_swahb32
-	return __arch_swahb32(val);
-#else
-	return ___constant_swahb32(val);
-#endif
-}
-
-/**
- * __swab16 - return a byteswapped 16-bit value
- * @x: value to byteswap
- */
-#define __swab16(x)				\
-	(__builtin_constant_p((__u16)(x)) ?	\
-	___constant_swab16(x) :			\
-	__fswab16(x))
-
-/**
- * __swab32 - return a byteswapped 32-bit value
- * @x: value to byteswap
- */
-#define __swab32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swab32(x) :			\
-	__fswab32(x))
-
-/**
- * __swab64 - return a byteswapped 64-bit value
- * @x: value to byteswap
- */
-#define __swab64(x)				\
-	(__builtin_constant_p((__u64)(x)) ?	\
-	___constant_swab64(x) :			\
-	__fswab64(x))
-
-/**
- * __swahw32 - return a word-swapped 32-bit value
- * @x: value to wordswap
- *
- * __swahw32(0x12340000) is 0x00001234
- */
-#define __swahw32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swahw32(x) :		\
-	__fswahw32(x))
-
-/**
- * __swahb32 - return a high and low byte-swapped 32-bit value
- * @x: value to byteswap
- *
- * __swahb32(0x12345678) is 0x34127856
- */
-#define __swahb32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swahb32(x) :		\
-	__fswahb32(x))
-
-/**
- * __swab16p - return a byteswapped 16-bit value from a pointer
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline __u16 __swab16p(const __u16 *p)
-{
-#ifdef __arch_swab16p
-	return __arch_swab16p(p);
-#else
-	return __swab16(*p);
-#endif
-}
-
-/**
- * __swab32p - return a byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline __u32 __swab32p(const __u32 *p)
-{
-#ifdef __arch_swab32p
-	return __arch_swab32p(p);
-#else
-	return __swab32(*p);
-#endif
-}
-
-/**
- * __swab64p - return a byteswapped 64-bit value from a pointer
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline __u64 __swab64p(const __u64 *p)
-{
-#ifdef __arch_swab64p
-	return __arch_swab64p(p);
-#else
-	return __swab64(*p);
-#endif
-}
-
-/**
- * __swahw32p - return a wordswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping.
- */
-static inline __u32 __swahw32p(const __u32 *p)
-{
-#ifdef __arch_swahw32p
-	return __arch_swahw32p(p);
-#else
-	return __swahw32(*p);
-#endif
-}
-
-/**
- * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high/low byteswapping.
- */
-static inline __u32 __swahb32p(const __u32 *p)
-{
-#ifdef __arch_swahb32p
-	return __arch_swahb32p(p);
-#else
-	return __swahb32(*p);
-#endif
-}
-
-/**
- * __swab16s - byteswap a 16-bit value in-place
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline void __swab16s(__u16 *p)
-{
-#ifdef __arch_swab16s
-	__arch_swab16s(p);
-#else
-	*p = __swab16p(p);
-#endif
-}
-/**
- * __swab32s - byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline void __swab32s(__u32 *p)
-{
-#ifdef __arch_swab32s
-	__arch_swab32s(p);
-#else
-	*p = __swab32p(p);
-#endif
-}
-
-/**
- * __swab64s - byteswap a 64-bit value in-place
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline void __swab64s(__u64 *p)
-{
-#ifdef __arch_swab64s
-	__arch_swab64s(p);
-#else
-	*p = __swab64p(p);
-#endif
-}
-
-/**
- * __swahw32s - wordswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping
- */
-static inline void __swahw32s(__u32 *p)
-{
-#ifdef __arch_swahw32s
-	__arch_swahw32s(p);
-#else
-	*p = __swahw32p(p);
-#endif
-}
-
-/**
- * __swahb32s - high and low byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high and low byte swapping
- */
-static inline void __swahb32s(__u32 *p)
-{
-#ifdef __arch_swahb32s
-	__arch_swahb32s(p);
-#else
-	*p = __swahb32p(p);
-#endif
-}
-
-#ifdef __KERNEL__
 # define swab16 __swab16
 # define swab32 __swab32
 # define swab64 __swab64
@@ -294,6 +18,4 @@ static inline void __swahb32s(__u32 *p)
 # define swab64s __swab64s
 # define swahw32s __swahw32s
 # define swahb32s __swahb32s
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SWAB_H */
diff --git a/include/linux/synclink.h b/include/linux/synclink.h
index 2e7d81c4e5ad..f1405b1c71ba 100644
--- a/include/linux/synclink.h
+++ b/include/linux/synclink.h
@@ -8,295 +8,11 @@
  * Redistribution of this file is permitted under
  * the terms of the GNU Public License (GPL)
  */
-
 #ifndef _SYNCLINK_H_
 #define _SYNCLINK_H_
-#define SYNCLINK_H_VERSION 3.6
-
-#include <linux/types.h>
-
-#define BIT0	0x0001
-#define BIT1	0x0002
-#define BIT2	0x0004
-#define BIT3	0x0008
-#define BIT4	0x0010
-#define BIT5	0x0020
-#define BIT6	0x0040
-#define BIT7	0x0080
-#define BIT8	0x0100
-#define BIT9	0x0200
-#define BIT10	0x0400
-#define BIT11	0x0800
-#define BIT12	0x1000
-#define BIT13	0x2000
-#define BIT14	0x4000
-#define BIT15	0x8000
-#define BIT16	0x00010000
-#define BIT17	0x00020000
-#define BIT18	0x00040000
-#define BIT19	0x00080000
-#define BIT20	0x00100000
-#define BIT21	0x00200000
-#define BIT22	0x00400000
-#define BIT23	0x00800000
-#define BIT24	0x01000000
-#define BIT25	0x02000000
-#define BIT26	0x04000000
-#define BIT27	0x08000000
-#define BIT28	0x10000000
-#define BIT29	0x20000000
-#define BIT30	0x40000000
-#define BIT31	0x80000000
-
-
-#define HDLC_MAX_FRAME_SIZE	65535
-#define MAX_ASYNC_TRANSMIT	4096
-#define MAX_ASYNC_BUFFER_SIZE	4096
-
-#define ASYNC_PARITY_NONE		0
-#define ASYNC_PARITY_EVEN		1
-#define ASYNC_PARITY_ODD		2
-#define ASYNC_PARITY_SPACE		3
-
-#define HDLC_FLAG_UNDERRUN_ABORT7	0x0000
-#define HDLC_FLAG_UNDERRUN_ABORT15	0x0001
-#define HDLC_FLAG_UNDERRUN_FLAG		0x0002
-#define HDLC_FLAG_UNDERRUN_CRC		0x0004
-#define HDLC_FLAG_SHARE_ZERO		0x0010
-#define HDLC_FLAG_AUTO_CTS		0x0020
-#define HDLC_FLAG_AUTO_DCD		0x0040
-#define HDLC_FLAG_AUTO_RTS		0x0080
-#define HDLC_FLAG_RXC_DPLL		0x0100
-#define HDLC_FLAG_RXC_BRG		0x0200
-#define HDLC_FLAG_RXC_TXCPIN		0x8000
-#define HDLC_FLAG_RXC_RXCPIN		0x0000
-#define HDLC_FLAG_TXC_DPLL		0x0400
-#define HDLC_FLAG_TXC_BRG		0x0800
-#define HDLC_FLAG_TXC_TXCPIN		0x0000
-#define HDLC_FLAG_TXC_RXCPIN		0x0008
-#define HDLC_FLAG_DPLL_DIV8		0x1000
-#define HDLC_FLAG_DPLL_DIV16		0x2000
-#define HDLC_FLAG_DPLL_DIV32		0x0000
-#define HDLC_FLAG_HDLC_LOOPMODE		0x4000
-
-#define HDLC_CRC_NONE			0
-#define HDLC_CRC_16_CCITT		1
-#define HDLC_CRC_32_CCITT		2
-#define HDLC_CRC_MASK			0x00ff
-#define HDLC_CRC_RETURN_EX		0x8000
-
-#define RX_OK				0
-#define RX_CRC_ERROR			1
-
-#define HDLC_TXIDLE_FLAGS		0
-#define HDLC_TXIDLE_ALT_ZEROS_ONES	1
-#define HDLC_TXIDLE_ZEROS		2
-#define HDLC_TXIDLE_ONES		3
-#define HDLC_TXIDLE_ALT_MARK_SPACE	4
-#define HDLC_TXIDLE_SPACE		5
-#define HDLC_TXIDLE_MARK		6
-#define HDLC_TXIDLE_CUSTOM_8            0x10000000
-#define HDLC_TXIDLE_CUSTOM_16           0x20000000
-
-#define HDLC_ENCODING_NRZ			0
-#define HDLC_ENCODING_NRZB			1
-#define HDLC_ENCODING_NRZI_MARK			2
-#define HDLC_ENCODING_NRZI_SPACE		3
-#define HDLC_ENCODING_NRZI			HDLC_ENCODING_NRZI_SPACE
-#define HDLC_ENCODING_BIPHASE_MARK		4
-#define HDLC_ENCODING_BIPHASE_SPACE		5
-#define HDLC_ENCODING_BIPHASE_LEVEL		6
-#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL	7
-
-#define HDLC_PREAMBLE_LENGTH_8BITS	0
-#define HDLC_PREAMBLE_LENGTH_16BITS	1
-#define HDLC_PREAMBLE_LENGTH_32BITS	2
-#define HDLC_PREAMBLE_LENGTH_64BITS	3
-
-#define HDLC_PREAMBLE_PATTERN_NONE	0
-#define HDLC_PREAMBLE_PATTERN_ZEROS	1
-#define HDLC_PREAMBLE_PATTERN_FLAGS	2
-#define HDLC_PREAMBLE_PATTERN_10	3
-#define HDLC_PREAMBLE_PATTERN_01	4
-#define HDLC_PREAMBLE_PATTERN_ONES	5
-
-#define MGSL_MODE_ASYNC		1
-#define MGSL_MODE_HDLC		2
-#define MGSL_MODE_MONOSYNC	3
-#define MGSL_MODE_BISYNC	4
-#define MGSL_MODE_RAW		6
-#define MGSL_MODE_BASE_CLOCK    7
-#define MGSL_MODE_XSYNC         8
-
-#define MGSL_BUS_TYPE_ISA	1
-#define MGSL_BUS_TYPE_EISA	2
-#define MGSL_BUS_TYPE_PCI	5
-
-#define MGSL_INTERFACE_MASK     0xf
-#define MGSL_INTERFACE_DISABLE  0
-#define MGSL_INTERFACE_RS232    1
-#define MGSL_INTERFACE_V35      2
-#define MGSL_INTERFACE_RS422    3
-#define MGSL_INTERFACE_RTS_EN   0x10
-#define MGSL_INTERFACE_LL       0x20
-#define MGSL_INTERFACE_RL       0x40
-#define MGSL_INTERFACE_MSB_FIRST 0x80
-
-typedef struct _MGSL_PARAMS
-{
-	/* Common */
-
-	unsigned long	mode;		/* Asynchronous or HDLC */
-	unsigned char	loopback;	/* internal loopback mode */
-
-	/* HDLC Only */
-
-	unsigned short	flags;
-	unsigned char	encoding;	/* NRZ, NRZI, etc. */
-	unsigned long	clock_speed;	/* external clock speed in bits per second */
-	unsigned char	addr_filter;	/* receive HDLC address filter, 0xFF = disable */
-	unsigned short	crc_type;	/* None, CRC16-CCITT, or CRC32-CCITT */
-	unsigned char	preamble_length;
-	unsigned char	preamble;
 
-	/* Async Only */
+#include <uapi/linux/synclink.h>
 
-	unsigned long	data_rate;	/* bits per second */
-	unsigned char	data_bits;	/* 7 or 8 data bits */
-	unsigned char	stop_bits;	/* 1 or 2 stop bits */
-	unsigned char	parity;		/* none, even, or odd */
-
-} MGSL_PARAMS, *PMGSL_PARAMS;
-
-#define MICROGATE_VENDOR_ID 0x13c0
-#define SYNCLINK_DEVICE_ID 0x0010
-#define MGSCC_DEVICE_ID 0x0020
-#define SYNCLINK_SCA_DEVICE_ID 0x0030
-#define SYNCLINK_GT_DEVICE_ID 0x0070
-#define SYNCLINK_GT4_DEVICE_ID 0x0080
-#define SYNCLINK_AC_DEVICE_ID  0x0090
-#define SYNCLINK_GT2_DEVICE_ID 0x00A0
-#define MGSL_MAX_SERIAL_NUMBER 30
-
-/*
-** device diagnostics status
-*/
-
-#define DiagStatus_OK				0
-#define DiagStatus_AddressFailure		1
-#define DiagStatus_AddressConflict		2
-#define DiagStatus_IrqFailure			3
-#define DiagStatus_IrqConflict			4
-#define DiagStatus_DmaFailure			5
-#define DiagStatus_DmaConflict			6
-#define DiagStatus_PciAdapterNotFound		7
-#define DiagStatus_CantAssignPciResources	8
-#define DiagStatus_CantAssignPciMemAddr		9
-#define DiagStatus_CantAssignPciIoAddr		10
-#define DiagStatus_CantAssignPciIrq		11
-#define DiagStatus_MemoryError			12
-
-#define SerialSignal_DCD            0x01     /* Data Carrier Detect */
-#define SerialSignal_TXD            0x02     /* Transmit Data */
-#define SerialSignal_RI             0x04     /* Ring Indicator */
-#define SerialSignal_RXD            0x08     /* Receive Data */
-#define SerialSignal_CTS            0x10     /* Clear to Send */
-#define SerialSignal_RTS            0x20     /* Request to Send */
-#define SerialSignal_DSR            0x40     /* Data Set Ready */
-#define SerialSignal_DTR            0x80     /* Data Terminal Ready */
-
-
-/*
- * Counters of the input lines (CTS, DSR, RI, CD) interrupts
- */
-struct mgsl_icount {
-	__u32	cts, dsr, rng, dcd, tx, rx;
-	__u32	frame, parity, overrun, brk;
-	__u32	buf_overrun;
-	__u32	txok;
-	__u32	txunder;
-	__u32	txabort;
-	__u32	txtimeout;
-	__u32	rxshort;
-	__u32	rxlong;
-	__u32	rxabort;
-	__u32	rxover;
-	__u32	rxcrc;
-	__u32	rxok;
-	__u32	exithunt;
-	__u32	rxidle;
-};
-
-struct gpio_desc {
-	__u32 state;
-	__u32 smask;
-	__u32 dir;
-	__u32 dmask;
-};
-
-#define DEBUG_LEVEL_DATA	1
-#define DEBUG_LEVEL_ERROR 	2
-#define DEBUG_LEVEL_INFO  	3
-#define DEBUG_LEVEL_BH    	4
-#define DEBUG_LEVEL_ISR		5
-
-/*
-** Event bit flags for use with MgslWaitEvent
-*/
-
-#define MgslEvent_DsrActive	0x0001
-#define MgslEvent_DsrInactive	0x0002
-#define MgslEvent_Dsr		0x0003
-#define MgslEvent_CtsActive	0x0004
-#define MgslEvent_CtsInactive	0x0008
-#define MgslEvent_Cts		0x000c
-#define MgslEvent_DcdActive	0x0010
-#define MgslEvent_DcdInactive	0x0020
-#define MgslEvent_Dcd		0x0030
-#define MgslEvent_RiActive	0x0040
-#define MgslEvent_RiInactive	0x0080
-#define MgslEvent_Ri		0x00c0
-#define MgslEvent_ExitHuntMode	0x0100
-#define MgslEvent_IdleReceived	0x0200
-
-/* Private IOCTL codes:
- *
- * MGSL_IOCSPARAMS	set MGSL_PARAMS structure values
- * MGSL_IOCGPARAMS	get current MGSL_PARAMS structure values
- * MGSL_IOCSTXIDLE	set current transmit idle mode
- * MGSL_IOCGTXIDLE	get current transmit idle mode
- * MGSL_IOCTXENABLE	enable or disable transmitter
- * MGSL_IOCRXENABLE	enable or disable receiver
- * MGSL_IOCTXABORT	abort transmitting frame (HDLC)
- * MGSL_IOCGSTATS	return current statistics
- * MGSL_IOCWAITEVENT	wait for specified event to occur
- * MGSL_LOOPTXDONE	transmit in HDLC LoopMode done
- * MGSL_IOCSIF          set the serial interface type
- * MGSL_IOCGIF          get the serial interface type
- */
-#define MGSL_MAGIC_IOC	'm'
-#define MGSL_IOCSPARAMS		_IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
-#define MGSL_IOCGPARAMS		_IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
-#define MGSL_IOCSTXIDLE		_IO(MGSL_MAGIC_IOC,2)
-#define MGSL_IOCGTXIDLE		_IO(MGSL_MAGIC_IOC,3)
-#define MGSL_IOCTXENABLE	_IO(MGSL_MAGIC_IOC,4)
-#define MGSL_IOCRXENABLE	_IO(MGSL_MAGIC_IOC,5)
-#define MGSL_IOCTXABORT		_IO(MGSL_MAGIC_IOC,6)
-#define MGSL_IOCGSTATS		_IO(MGSL_MAGIC_IOC,7)
-#define MGSL_IOCWAITEVENT	_IOWR(MGSL_MAGIC_IOC,8,int)
-#define MGSL_IOCCLRMODCOUNT	_IO(MGSL_MAGIC_IOC,15)
-#define MGSL_IOCLOOPTXDONE	_IO(MGSL_MAGIC_IOC,9)
-#define MGSL_IOCSIF		_IO(MGSL_MAGIC_IOC,10)
-#define MGSL_IOCGIF		_IO(MGSL_MAGIC_IOC,11)
-#define MGSL_IOCSGPIO		_IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
-#define MGSL_IOCGGPIO		_IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
-#define MGSL_IOCWAITGPIO	_IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
-#define MGSL_IOCSXSYNC		_IO(MGSL_MAGIC_IOC, 19)
-#define MGSL_IOCGXSYNC		_IO(MGSL_MAGIC_IOC, 20)
-#define MGSL_IOCSXCTRL		_IO(MGSL_MAGIC_IOC, 21)
-#define MGSL_IOCGXCTRL		_IO(MGSL_MAGIC_IOC, 22)
-
-#ifdef __KERNEL__
 /* provide 32 bit ioctl compatibility on 64 bit systems */
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
@@ -318,6 +34,4 @@ struct MGSL_PARAMS32 {
 #define MGSL_IOCSPARAMS32 _IOW(MGSL_MAGIC_IOC,0,struct MGSL_PARAMS32)
 #define MGSL_IOCGPARAMS32 _IOR(MGSL_MAGIC_IOC,1,struct MGSL_PARAMS32)
 #endif
-#endif
-
 #endif /* _SYNCLINK_H_ */
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index c34b4c82b0dc..cd844a6a8d5f 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -18,921 +18,14 @@
  ****************************************************************
  ****************************************************************
  */
-
 #ifndef _LINUX_SYSCTL_H
 #define _LINUX_SYSCTL_H
 
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-struct completion;
-
-#define CTL_MAXNAME 10		/* how many path components do we allow in a
-				   call to sysctl?   In other words, what is
-				   the largest acceptable value for the nlen
-				   member of a struct __sysctl_args to have? */
-
-struct __sysctl_args {
-	int __user *name;
-	int nlen;
-	void __user *oldval;
-	size_t __user *oldlenp;
-	void __user *newval;
-	size_t newlen;
-	unsigned long __unused[4];
-};
-
-/* Define sysctl names first */
-
-/* Top-level names: */
-
-enum
-{
-	CTL_KERN=1,		/* General kernel info and control */
-	CTL_VM=2,		/* VM management */
-	CTL_NET=3,		/* Networking */
-	CTL_PROC=4,		/* removal breaks strace(1) compilation */
-	CTL_FS=5,		/* Filesystems */
-	CTL_DEBUG=6,		/* Debugging */
-	CTL_DEV=7,		/* Devices */
-	CTL_BUS=8,		/* Busses */
-	CTL_ABI=9,		/* Binary emulation */
-	CTL_CPU=10,		/* CPU stuff (speed scaling, etc) */
-	CTL_ARLAN=254,		/* arlan wireless driver */
-	CTL_S390DBF=5677,	/* s390 debug */
-	CTL_SUNRPC=7249,	/* sunrpc debug */
-	CTL_PM=9899,		/* frv power management */
-	CTL_FRV=9898,		/* frv specific sysctls */
-};
-
-/* CTL_BUS names: */
-enum
-{
-	CTL_BUS_ISA=1		/* ISA */
-};
-
-/* /proc/sys/fs/inotify/ */
-enum
-{
-	INOTIFY_MAX_USER_INSTANCES=1,	/* max instances per user */
-	INOTIFY_MAX_USER_WATCHES=2,	/* max watches per user */
-	INOTIFY_MAX_QUEUED_EVENTS=3	/* max queued events per instance */
-};
-
-/* CTL_KERN names: */
-enum
-{
-	KERN_OSTYPE=1,		/* string: system version */
-	KERN_OSRELEASE=2,	/* string: system release */
-	KERN_OSREV=3,		/* int: system revision */
-	KERN_VERSION=4,		/* string: compile time info */
-	KERN_SECUREMASK=5,	/* struct: maximum rights mask */
-	KERN_PROF=6,		/* table: profiling information */
-	KERN_NODENAME=7,	/* string: hostname */
-	KERN_DOMAINNAME=8,	/* string: domainname */
-
-	KERN_PANIC=15,		/* int: panic timeout */
-	KERN_REALROOTDEV=16,	/* real root device to mount after initrd */
-
-	KERN_SPARC_REBOOT=21,	/* reboot command on Sparc */
-	KERN_CTLALTDEL=22,	/* int: allow ctl-alt-del to reboot */
-	KERN_PRINTK=23,		/* struct: control printk logging parameters */
-	KERN_NAMETRANS=24,	/* Name translation */
-	KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
-	KERN_PPC_ZEROPAGED=26,	/* turn idle page zeroing on/off on PPC */
-	KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
-	KERN_MODPROBE=28,	/* string: modprobe path */
-	KERN_SG_BIG_BUFF=29,	/* int: sg driver reserved buffer size */
-	KERN_ACCT=30,		/* BSD process accounting parameters */
-	KERN_PPC_L2CR=31,	/* l2cr register on PPC */
-
-	KERN_RTSIGNR=32,	/* Number of rt sigs queued */
-	KERN_RTSIGMAX=33,	/* Max queuable */
-	
-	KERN_SHMMAX=34,         /* long: Maximum shared memory segment */
-	KERN_MSGMAX=35,         /* int: Maximum size of a messege */
-	KERN_MSGMNB=36,         /* int: Maximum message queue size */
-	KERN_MSGPOOL=37,        /* int: Maximum system message pool size */
-	KERN_SYSRQ=38,		/* int: Sysreq enable */
-	KERN_MAX_THREADS=39,	/* int: Maximum nr of threads in the system */
- 	KERN_RANDOM=40,		/* Random driver */
- 	KERN_SHMALL=41,		/* int: Maximum size of shared memory */
- 	KERN_MSGMNI=42,		/* int: msg queue identifiers */
- 	KERN_SEM=43,		/* struct: sysv semaphore limits */
- 	KERN_SPARC_STOP_A=44,	/* int: Sparc Stop-A enable */
- 	KERN_SHMMNI=45,		/* int: shm array identifiers */
-	KERN_OVERFLOWUID=46,	/* int: overflow UID */
-	KERN_OVERFLOWGID=47,	/* int: overflow GID */
-	KERN_SHMPATH=48,	/* string: path to shm fs */
-	KERN_HOTPLUG=49,	/* string: path to uevent helper (deprecated) */
-	KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
-	KERN_S390_USER_DEBUG_LOGGING=51,  /* int: dumps of user faults */
-	KERN_CORE_USES_PID=52,		/* int: use core or core.%pid */
-	KERN_TAINTED=53,	/* int: various kernel tainted flags */
-	KERN_CADPID=54,		/* int: PID of the process to notify on CAD */
-	KERN_PIDMAX=55,		/* int: PID # limit */
-  	KERN_CORE_PATTERN=56,	/* string: pattern for core-file names */
-	KERN_PANIC_ON_OOPS=57,  /* int: whether we will panic on an oops */
-	KERN_HPPA_PWRSW=58,	/* int: hppa soft-power enable */
-	KERN_HPPA_UNALIGNED=59,	/* int: hppa unaligned-trap enable */
-	KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
-	KERN_PRINTK_RATELIMIT_BURST=61,	/* int: tune printk ratelimiting */
-	KERN_PTY=62,		/* dir: pty driver */
-	KERN_NGROUPS_MAX=63,	/* int: NGROUPS_MAX */
-	KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
-	KERN_HZ_TIMER=65,	/* int: hz timer on or off */
-	KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
-	KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
-	KERN_RANDOMIZE=68, /* int: randomize virtual address space */
-	KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
-	KERN_SPIN_RETRY=70,	/* int: number of spinlock retries */
-	KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
-	KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
-	KERN_COMPAT_LOG=73,	/* int: print compat layer  messages */
-	KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
-	KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
-	KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
-};
-
-
-
-/* CTL_VM names: */
-enum
-{
-	VM_UNUSED1=1,		/* was: struct: Set vm swapping control */
-	VM_UNUSED2=2,		/* was; int: Linear or sqrt() swapout for hogs */
-	VM_UNUSED3=3,		/* was: struct: Set free page thresholds */
-	VM_UNUSED4=4,		/* Spare */
-	VM_OVERCOMMIT_MEMORY=5,	/* Turn off the virtual memory safety limit */
-	VM_UNUSED5=6,		/* was: struct: Set buffer memory thresholds */
-	VM_UNUSED7=7,		/* was: struct: Set cache memory thresholds */
-	VM_UNUSED8=8,		/* was: struct: Control kswapd behaviour */
-	VM_UNUSED9=9,		/* was: struct: Set page table cache parameters */
-	VM_PAGE_CLUSTER=10,	/* int: set number of pages to swap together */
-	VM_DIRTY_BACKGROUND=11,	/* dirty_background_ratio */
-	VM_DIRTY_RATIO=12,	/* dirty_ratio */
-	VM_DIRTY_WB_CS=13,	/* dirty_writeback_centisecs */
-	VM_DIRTY_EXPIRE_CS=14,	/* dirty_expire_centisecs */
-	VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
-	VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
-	VM_PAGEBUF=17,		/* struct: Control pagebuf parameters */
-	VM_HUGETLB_PAGES=18,	/* int: Number of available Huge Pages */
-	VM_SWAPPINESS=19,	/* Tendency to steal mapped memory */
-	VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
-	VM_MIN_FREE_KBYTES=21,	/* Minimum free kilobytes to maintain */
-	VM_MAX_MAP_COUNT=22,	/* int: Maximum number of mmaps/address-space */
-	VM_LAPTOP_MODE=23,	/* vm laptop mode */
-	VM_BLOCK_DUMP=24,	/* block dump mode */
-	VM_HUGETLB_GROUP=25,	/* permitted hugetlb group */
-	VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
-	VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
-	VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
-	VM_DROP_PAGECACHE=29,	/* int: nuke lots of pagecache */
-	VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
-	VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
-	VM_MIN_UNMAPPED=32,	/* Set min percent of unmapped pages */
-	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
-	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
-	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
-};
-
-
-/* CTL_NET names: */
-enum
-{
-	NET_CORE=1,
-	NET_ETHER=2,
-	NET_802=3,
-	NET_UNIX=4,
-	NET_IPV4=5,
-	NET_IPX=6,
-	NET_ATALK=7,
-	NET_NETROM=8,
-	NET_AX25=9,
-	NET_BRIDGE=10,
-	NET_ROSE=11,
-	NET_IPV6=12,
-	NET_X25=13,
-	NET_TR=14,
-	NET_DECNET=15,
-	NET_ECONET=16,
-	NET_SCTP=17,
-	NET_LLC=18,
-	NET_NETFILTER=19,
-	NET_DCCP=20,
-	NET_IRDA=412,
-};
-
-/* /proc/sys/kernel/random */
-enum
-{
-	RANDOM_POOLSIZE=1,
-	RANDOM_ENTROPY_COUNT=2,
-	RANDOM_READ_THRESH=3,
-	RANDOM_WRITE_THRESH=4,
-	RANDOM_BOOT_ID=5,
-	RANDOM_UUID=6
-};
-
-/* /proc/sys/kernel/pty */
-enum
-{
-	PTY_MAX=1,
-	PTY_NR=2
-};
-
-/* /proc/sys/bus/isa */
-enum
-{
-	BUS_ISA_MEM_BASE=1,
-	BUS_ISA_PORT_BASE=2,
-	BUS_ISA_PORT_SHIFT=3
-};
-
-/* /proc/sys/net/core */
-enum
-{
-	NET_CORE_WMEM_MAX=1,
-	NET_CORE_RMEM_MAX=2,
-	NET_CORE_WMEM_DEFAULT=3,
-	NET_CORE_RMEM_DEFAULT=4,
-/* was	NET_CORE_DESTROY_DELAY */
-	NET_CORE_MAX_BACKLOG=6,
-	NET_CORE_FASTROUTE=7,
-	NET_CORE_MSG_COST=8,
-	NET_CORE_MSG_BURST=9,
-	NET_CORE_OPTMEM_MAX=10,
-	NET_CORE_HOT_LIST_LENGTH=11,
-	NET_CORE_DIVERT_VERSION=12,
-	NET_CORE_NO_CONG_THRESH=13,
-	NET_CORE_NO_CONG=14,
-	NET_CORE_LO_CONG=15,
-	NET_CORE_MOD_CONG=16,
-	NET_CORE_DEV_WEIGHT=17,
-	NET_CORE_SOMAXCONN=18,
-	NET_CORE_BUDGET=19,
-	NET_CORE_AEVENT_ETIME=20,
-	NET_CORE_AEVENT_RSEQTH=21,
-	NET_CORE_WARNINGS=22,
-};
-
-/* /proc/sys/net/ethernet */
-
-/* /proc/sys/net/802 */
-
-/* /proc/sys/net/unix */
-
-enum
-{
-	NET_UNIX_DESTROY_DELAY=1,
-	NET_UNIX_DELETE_DELAY=2,
-	NET_UNIX_MAX_DGRAM_QLEN=3,
-};
-
-/* /proc/sys/net/netfilter */
-enum
-{
-	NET_NF_CONNTRACK_MAX=1,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
-	NET_NF_CONNTRACK_UDP_TIMEOUT=10,
-	NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
-	NET_NF_CONNTRACK_ICMP_TIMEOUT=12,
-	NET_NF_CONNTRACK_GENERIC_TIMEOUT=13,
-	NET_NF_CONNTRACK_BUCKETS=14,
-	NET_NF_CONNTRACK_LOG_INVALID=15,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
-	NET_NF_CONNTRACK_TCP_LOOSE=17,
-	NET_NF_CONNTRACK_TCP_BE_LIBERAL=18,
-	NET_NF_CONNTRACK_TCP_MAX_RETRANS=19,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
-	NET_NF_CONNTRACK_COUNT=27,
-	NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28,
-	NET_NF_CONNTRACK_FRAG6_TIMEOUT=29,
-	NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30,
-	NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31,
-	NET_NF_CONNTRACK_CHECKSUM=32,
-};
-
-/* /proc/sys/net/ipv4 */
-enum
-{
-	/* v2.0 compatibile variables */
-	NET_IPV4_FORWARD=8,
-	NET_IPV4_DYNADDR=9,
-
-	NET_IPV4_CONF=16,
-	NET_IPV4_NEIGH=17,
-	NET_IPV4_ROUTE=18,
-	NET_IPV4_FIB_HASH=19,
-	NET_IPV4_NETFILTER=20,
-
-	NET_IPV4_TCP_TIMESTAMPS=33,
-	NET_IPV4_TCP_WINDOW_SCALING=34,
-	NET_IPV4_TCP_SACK=35,
-	NET_IPV4_TCP_RETRANS_COLLAPSE=36,
-	NET_IPV4_DEFAULT_TTL=37,
-	NET_IPV4_AUTOCONFIG=38,
-	NET_IPV4_NO_PMTU_DISC=39,
-	NET_IPV4_TCP_SYN_RETRIES=40,
-	NET_IPV4_IPFRAG_HIGH_THRESH=41,
-	NET_IPV4_IPFRAG_LOW_THRESH=42,
-	NET_IPV4_IPFRAG_TIME=43,
-	NET_IPV4_TCP_MAX_KA_PROBES=44,
-	NET_IPV4_TCP_KEEPALIVE_TIME=45,
-	NET_IPV4_TCP_KEEPALIVE_PROBES=46,
-	NET_IPV4_TCP_RETRIES1=47,
-	NET_IPV4_TCP_RETRIES2=48,
-	NET_IPV4_TCP_FIN_TIMEOUT=49,
-	NET_IPV4_IP_MASQ_DEBUG=50,
-	NET_TCP_SYNCOOKIES=51,
-	NET_TCP_STDURG=52,
-	NET_TCP_RFC1337=53,
-	NET_TCP_SYN_TAILDROP=54,
-	NET_TCP_MAX_SYN_BACKLOG=55,
-	NET_IPV4_LOCAL_PORT_RANGE=56,
-	NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
-	NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
-	NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
-	NET_IPV4_ICMP_DESTUNREACH_RATE=60,
-	NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
-	NET_IPV4_ICMP_PARAMPROB_RATE=62,
-	NET_IPV4_ICMP_ECHOREPLY_RATE=63,
-	NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
-	NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
-	NET_TCP_TW_RECYCLE=66,
-	NET_IPV4_ALWAYS_DEFRAG=67,
-	NET_IPV4_TCP_KEEPALIVE_INTVL=68,
-	NET_IPV4_INET_PEER_THRESHOLD=69,
-	NET_IPV4_INET_PEER_MINTTL=70,
-	NET_IPV4_INET_PEER_MAXTTL=71,
-	NET_IPV4_INET_PEER_GC_MINTIME=72,
-	NET_IPV4_INET_PEER_GC_MAXTIME=73,
-	NET_TCP_ORPHAN_RETRIES=74,
-	NET_TCP_ABORT_ON_OVERFLOW=75,
-	NET_TCP_SYNACK_RETRIES=76,
-	NET_TCP_MAX_ORPHANS=77,
-	NET_TCP_MAX_TW_BUCKETS=78,
-	NET_TCP_FACK=79,
-	NET_TCP_REORDERING=80,
-	NET_TCP_ECN=81,
-	NET_TCP_DSACK=82,
-	NET_TCP_MEM=83,
-	NET_TCP_WMEM=84,
-	NET_TCP_RMEM=85,
-	NET_TCP_APP_WIN=86,
-	NET_TCP_ADV_WIN_SCALE=87,
-	NET_IPV4_NONLOCAL_BIND=88,
-	NET_IPV4_ICMP_RATELIMIT=89,
-	NET_IPV4_ICMP_RATEMASK=90,
-	NET_TCP_TW_REUSE=91,
-	NET_TCP_FRTO=92,
-	NET_TCP_LOW_LATENCY=93,
-	NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
-	NET_IPV4_IGMP_MAX_MSF=96,
-	NET_TCP_NO_METRICS_SAVE=97,
-	NET_TCP_DEFAULT_WIN_SCALE=105,
-	NET_TCP_MODERATE_RCVBUF=106,
-	NET_TCP_TSO_WIN_DIVISOR=107,
-	NET_TCP_BIC_BETA=108,
-	NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
-	NET_TCP_CONG_CONTROL=110,
-	NET_TCP_ABC=111,
-	NET_IPV4_IPFRAG_MAX_DIST=112,
- 	NET_TCP_MTU_PROBING=113,
-	NET_TCP_BASE_MSS=114,
-	NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115,
-	NET_TCP_DMA_COPYBREAK=116,
-	NET_TCP_SLOW_START_AFTER_IDLE=117,
-	NET_CIPSOV4_CACHE_ENABLE=118,
-	NET_CIPSOV4_CACHE_BUCKET_SIZE=119,
-	NET_CIPSOV4_RBM_OPTFMT=120,
-	NET_CIPSOV4_RBM_STRICTVALID=121,
-	NET_TCP_AVAIL_CONG_CONTROL=122,
-	NET_TCP_ALLOWED_CONG_CONTROL=123,
-	NET_TCP_MAX_SSTHRESH=124,
-	NET_TCP_FRTO_RESPONSE=125,
-};
-
-enum {
-	NET_IPV4_ROUTE_FLUSH=1,
-	NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */
-	NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */
-	NET_IPV4_ROUTE_GC_THRESH=4,
-	NET_IPV4_ROUTE_MAX_SIZE=5,
-	NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
-	NET_IPV4_ROUTE_GC_TIMEOUT=7,
-	NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */
-	NET_IPV4_ROUTE_REDIRECT_LOAD=9,
-	NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
-	NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
-	NET_IPV4_ROUTE_ERROR_COST=12,
-	NET_IPV4_ROUTE_ERROR_BURST=13,
-	NET_IPV4_ROUTE_GC_ELASTICITY=14,
-	NET_IPV4_ROUTE_MTU_EXPIRES=15,
-	NET_IPV4_ROUTE_MIN_PMTU=16,
-	NET_IPV4_ROUTE_MIN_ADVMSS=17,
-	NET_IPV4_ROUTE_SECRET_INTERVAL=18,
-	NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
-};
-
-enum
-{
-	NET_PROTO_CONF_ALL=-2,
-	NET_PROTO_CONF_DEFAULT=-3
-
-	/* And device ifindices ... */
-};
-
-enum
-{
-	NET_IPV4_CONF_FORWARDING=1,
-	NET_IPV4_CONF_MC_FORWARDING=2,
-	NET_IPV4_CONF_PROXY_ARP=3,
-	NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
-	NET_IPV4_CONF_SECURE_REDIRECTS=5,
-	NET_IPV4_CONF_SEND_REDIRECTS=6,
-	NET_IPV4_CONF_SHARED_MEDIA=7,
-	NET_IPV4_CONF_RP_FILTER=8,
-	NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
-	NET_IPV4_CONF_BOOTP_RELAY=10,
-	NET_IPV4_CONF_LOG_MARTIANS=11,
-	NET_IPV4_CONF_TAG=12,
-	NET_IPV4_CONF_ARPFILTER=13,
-	NET_IPV4_CONF_MEDIUM_ID=14,
-	NET_IPV4_CONF_NOXFRM=15,
-	NET_IPV4_CONF_NOPOLICY=16,
-	NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
-	NET_IPV4_CONF_ARP_ANNOUNCE=18,
-	NET_IPV4_CONF_ARP_IGNORE=19,
-	NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
-	NET_IPV4_CONF_ARP_ACCEPT=21,
-	NET_IPV4_CONF_ARP_NOTIFY=22,
-};
-
-/* /proc/sys/net/ipv4/netfilter */
-enum
-{
-	NET_IPV4_NF_CONNTRACK_MAX=1,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
-	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
-	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
-	NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
-	NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
-	NET_IPV4_NF_CONNTRACK_BUCKETS=14,
-	NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
-	NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
-	NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
-	NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
-	NET_IPV4_NF_CONNTRACK_COUNT=27,
-	NET_IPV4_NF_CONNTRACK_CHECKSUM=28,
-};
- 
-/* /proc/sys/net/ipv6 */
-enum {
-	NET_IPV6_CONF=16,
-	NET_IPV6_NEIGH=17,
-	NET_IPV6_ROUTE=18,
-	NET_IPV6_ICMP=19,
-	NET_IPV6_BINDV6ONLY=20,
-	NET_IPV6_IP6FRAG_HIGH_THRESH=21,
-	NET_IPV6_IP6FRAG_LOW_THRESH=22,
-	NET_IPV6_IP6FRAG_TIME=23,
-	NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
-	NET_IPV6_MLD_MAX_MSF=25,
-};
-
-enum {
-	NET_IPV6_ROUTE_FLUSH=1,
-	NET_IPV6_ROUTE_GC_THRESH=2,
-	NET_IPV6_ROUTE_MAX_SIZE=3,
-	NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
-	NET_IPV6_ROUTE_GC_TIMEOUT=5,
-	NET_IPV6_ROUTE_GC_INTERVAL=6,
-	NET_IPV6_ROUTE_GC_ELASTICITY=7,
-	NET_IPV6_ROUTE_MTU_EXPIRES=8,
-	NET_IPV6_ROUTE_MIN_ADVMSS=9,
-	NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
-};
-
-enum {
-	NET_IPV6_FORWARDING=1,
-	NET_IPV6_HOP_LIMIT=2,
-	NET_IPV6_MTU=3,
-	NET_IPV6_ACCEPT_RA=4,
-	NET_IPV6_ACCEPT_REDIRECTS=5,
-	NET_IPV6_AUTOCONF=6,
-	NET_IPV6_DAD_TRANSMITS=7,
-	NET_IPV6_RTR_SOLICITS=8,
-	NET_IPV6_RTR_SOLICIT_INTERVAL=9,
-	NET_IPV6_RTR_SOLICIT_DELAY=10,
-	NET_IPV6_USE_TEMPADDR=11,
-	NET_IPV6_TEMP_VALID_LFT=12,
-	NET_IPV6_TEMP_PREFERED_LFT=13,
-	NET_IPV6_REGEN_MAX_RETRY=14,
-	NET_IPV6_MAX_DESYNC_FACTOR=15,
-	NET_IPV6_MAX_ADDRESSES=16,
-	NET_IPV6_FORCE_MLD_VERSION=17,
-	NET_IPV6_ACCEPT_RA_DEFRTR=18,
-	NET_IPV6_ACCEPT_RA_PINFO=19,
-	NET_IPV6_ACCEPT_RA_RTR_PREF=20,
-	NET_IPV6_RTR_PROBE_INTERVAL=21,
-	NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
-	NET_IPV6_PROXY_NDP=23,
-	NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
-	__NET_IPV6_MAX
-};
-
-/* /proc/sys/net/ipv6/icmp */
-enum {
-	NET_IPV6_ICMP_RATELIMIT=1
-};
-
-/* /proc/sys/net/<protocol>/neigh/<dev> */
-enum {
-	NET_NEIGH_MCAST_SOLICIT=1,
-	NET_NEIGH_UCAST_SOLICIT=2,
-	NET_NEIGH_APP_SOLICIT=3,
-	NET_NEIGH_RETRANS_TIME=4,
-	NET_NEIGH_REACHABLE_TIME=5,
-	NET_NEIGH_DELAY_PROBE_TIME=6,
-	NET_NEIGH_GC_STALE_TIME=7,
-	NET_NEIGH_UNRES_QLEN=8,
-	NET_NEIGH_PROXY_QLEN=9,
-	NET_NEIGH_ANYCAST_DELAY=10,
-	NET_NEIGH_PROXY_DELAY=11,
-	NET_NEIGH_LOCKTIME=12,
-	NET_NEIGH_GC_INTERVAL=13,
-	NET_NEIGH_GC_THRESH1=14,
-	NET_NEIGH_GC_THRESH2=15,
-	NET_NEIGH_GC_THRESH3=16,
-	NET_NEIGH_RETRANS_TIME_MS=17,
-	NET_NEIGH_REACHABLE_TIME_MS=18,
-};
-
-/* /proc/sys/net/dccp */
-enum {
-	NET_DCCP_DEFAULT=1,
-};
-
-/* /proc/sys/net/ipx */
-enum {
-	NET_IPX_PPROP_BROADCASTING=1,
-	NET_IPX_FORWARDING=2
-};
-
-/* /proc/sys/net/llc */
-enum {
-	NET_LLC2=1,
-	NET_LLC_STATION=2,
-};
-
-/* /proc/sys/net/llc/llc2 */
-enum {
-	NET_LLC2_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/station */
-enum {
-	NET_LLC_STATION_ACK_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/llc2/timeout */
-enum {
-	NET_LLC2_ACK_TIMEOUT=1,
-	NET_LLC2_P_TIMEOUT=2,
-	NET_LLC2_REJ_TIMEOUT=3,
-	NET_LLC2_BUSY_TIMEOUT=4,
-};
-
-/* /proc/sys/net/appletalk */
-enum {
-	NET_ATALK_AARP_EXPIRY_TIME=1,
-	NET_ATALK_AARP_TICK_TIME=2,
-	NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
-	NET_ATALK_AARP_RESOLVE_TIME=4
-};
-
-
-/* /proc/sys/net/netrom */
-enum {
-	NET_NETROM_DEFAULT_PATH_QUALITY=1,
-	NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
-	NET_NETROM_NETWORK_TTL_INITIALISER=3,
-	NET_NETROM_TRANSPORT_TIMEOUT=4,
-	NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
-	NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
-	NET_NETROM_TRANSPORT_BUSY_DELAY=7,
-	NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
-	NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
-	NET_NETROM_ROUTING_CONTROL=10,
-	NET_NETROM_LINK_FAILS_COUNT=11,
-	NET_NETROM_RESET=12
-};
-
-/* /proc/sys/net/ax25 */
-enum {
-	NET_AX25_IP_DEFAULT_MODE=1,
-	NET_AX25_DEFAULT_MODE=2,
-	NET_AX25_BACKOFF_TYPE=3,
-	NET_AX25_CONNECT_MODE=4,
-	NET_AX25_STANDARD_WINDOW=5,
-	NET_AX25_EXTENDED_WINDOW=6,
-	NET_AX25_T1_TIMEOUT=7,
-	NET_AX25_T2_TIMEOUT=8,
-	NET_AX25_T3_TIMEOUT=9,
-	NET_AX25_IDLE_TIMEOUT=10,
-	NET_AX25_N2=11,
-	NET_AX25_PACLEN=12,
-	NET_AX25_PROTOCOL=13,
-	NET_AX25_DAMA_SLAVE_TIMEOUT=14
-};
-
-/* /proc/sys/net/rose */
-enum {
-	NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
-	NET_ROSE_CALL_REQUEST_TIMEOUT=2,
-	NET_ROSE_RESET_REQUEST_TIMEOUT=3,
-	NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
-	NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
-	NET_ROSE_ROUTING_CONTROL=6,
-	NET_ROSE_LINK_FAIL_TIMEOUT=7,
-	NET_ROSE_MAX_VCS=8,
-	NET_ROSE_WINDOW_SIZE=9,
-	NET_ROSE_NO_ACTIVITY_TIMEOUT=10
-};
-
-/* /proc/sys/net/x25 */
-enum {
-	NET_X25_RESTART_REQUEST_TIMEOUT=1,
-	NET_X25_CALL_REQUEST_TIMEOUT=2,
-	NET_X25_RESET_REQUEST_TIMEOUT=3,
-	NET_X25_CLEAR_REQUEST_TIMEOUT=4,
-	NET_X25_ACK_HOLD_BACK_TIMEOUT=5,
-	NET_X25_FORWARD=6
-};
-
-/* /proc/sys/net/token-ring */
-enum
-{
-	NET_TR_RIF_TIMEOUT=1
-};
-
-/* /proc/sys/net/decnet/ */
-enum {
-	NET_DECNET_NODE_TYPE = 1,
-	NET_DECNET_NODE_ADDRESS = 2,
-	NET_DECNET_NODE_NAME = 3,
-	NET_DECNET_DEFAULT_DEVICE = 4,
-	NET_DECNET_TIME_WAIT = 5,
-	NET_DECNET_DN_COUNT = 6,
-	NET_DECNET_DI_COUNT = 7,
-	NET_DECNET_DR_COUNT = 8,
-	NET_DECNET_DST_GC_INTERVAL = 9,
-	NET_DECNET_CONF = 10,
-	NET_DECNET_NO_FC_MAX_CWND = 11,
-	NET_DECNET_MEM = 12,
-	NET_DECNET_RMEM = 13,
-	NET_DECNET_WMEM = 14,
-	NET_DECNET_DEBUG_LEVEL = 255
-};
-
-/* /proc/sys/net/decnet/conf/<dev> */
-enum {
-	NET_DECNET_CONF_LOOPBACK = -2,
-	NET_DECNET_CONF_DDCMP = -3,
-	NET_DECNET_CONF_PPP = -4,
-	NET_DECNET_CONF_X25 = -5,
-	NET_DECNET_CONF_GRE = -6,
-	NET_DECNET_CONF_ETHER = -7
-
-	/* ... and ifindex of devices */
-};
-
-/* /proc/sys/net/decnet/conf/<dev>/ */
-enum {
-	NET_DECNET_CONF_DEV_PRIORITY = 1,
-	NET_DECNET_CONF_DEV_T1 = 2,
-	NET_DECNET_CONF_DEV_T2 = 3,
-	NET_DECNET_CONF_DEV_T3 = 4,
-	NET_DECNET_CONF_DEV_FORWARDING = 5,
-	NET_DECNET_CONF_DEV_BLKSIZE = 6,
-	NET_DECNET_CONF_DEV_STATE = 7
-};
-
-/* /proc/sys/net/sctp */
-enum {
-	NET_SCTP_RTO_INITIAL = 1,
-	NET_SCTP_RTO_MIN     = 2,
-	NET_SCTP_RTO_MAX     = 3,
-	NET_SCTP_RTO_ALPHA   = 4,
-	NET_SCTP_RTO_BETA    = 5,
-	NET_SCTP_VALID_COOKIE_LIFE       =  6,
-	NET_SCTP_ASSOCIATION_MAX_RETRANS =  7,
-	NET_SCTP_PATH_MAX_RETRANS        =  8,
-	NET_SCTP_MAX_INIT_RETRANSMITS    =  9,
-	NET_SCTP_HB_INTERVAL             = 10,
-	NET_SCTP_PRESERVE_ENABLE         = 11,
-	NET_SCTP_MAX_BURST               = 12,
-	NET_SCTP_ADDIP_ENABLE		 = 13,
-	NET_SCTP_PRSCTP_ENABLE		 = 14,
-	NET_SCTP_SNDBUF_POLICY		 = 15,
-	NET_SCTP_SACK_TIMEOUT		 = 16,
-	NET_SCTP_RCVBUF_POLICY		 = 17,
-};
-
-/* /proc/sys/net/bridge */
-enum {
-	NET_BRIDGE_NF_CALL_ARPTABLES = 1,
-	NET_BRIDGE_NF_CALL_IPTABLES = 2,
-	NET_BRIDGE_NF_CALL_IP6TABLES = 3,
-	NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
-	NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5,
-};
-
-/* proc/sys/net/irda */
-enum {
-	NET_IRDA_DISCOVERY=1,
-	NET_IRDA_DEVNAME=2,
-	NET_IRDA_DEBUG=3,
-	NET_IRDA_FAST_POLL=4,
-	NET_IRDA_DISCOVERY_SLOTS=5,
-	NET_IRDA_DISCOVERY_TIMEOUT=6,
-	NET_IRDA_SLOT_TIMEOUT=7,
-	NET_IRDA_MAX_BAUD_RATE=8,
-	NET_IRDA_MIN_TX_TURN_TIME=9,
-	NET_IRDA_MAX_TX_DATA_SIZE=10,
-	NET_IRDA_MAX_TX_WINDOW=11,
-	NET_IRDA_MAX_NOREPLY_TIME=12,
-	NET_IRDA_WARN_NOREPLY_TIME=13,
-	NET_IRDA_LAP_KEEPALIVE_TIME=14,
-};
-
-
-/* CTL_FS names: */
-enum
-{
-	FS_NRINODE=1,	/* int:current number of allocated inodes */
-	FS_STATINODE=2,
-	FS_MAXINODE=3,	/* int:maximum number of inodes that can be allocated */
-	FS_NRDQUOT=4,	/* int:current number of allocated dquots */
-	FS_MAXDQUOT=5,	/* int:maximum number of dquots that can be allocated */
-	FS_NRFILE=6,	/* int:current number of allocated filedescriptors */
-	FS_MAXFILE=7,	/* int:maximum number of filedescriptors that can be allocated */
-	FS_DENTRY=8,
-	FS_NRSUPER=9,	/* int:current number of allocated super_blocks */
-	FS_MAXSUPER=10,	/* int:maximum number of super_blocks that can be allocated */
-	FS_OVERFLOWUID=11,	/* int: overflow UID */
-	FS_OVERFLOWGID=12,	/* int: overflow GID */
-	FS_LEASES=13,	/* int: leases enabled */
-	FS_DIR_NOTIFY=14,	/* int: directory notification enabled */
-	FS_LEASE_TIME=15,	/* int: maximum time to wait for a lease break */
-	FS_DQSTATS=16,	/* disc quota usage statistics and control */
-	FS_XFS=17,	/* struct: control xfs parameters */
-	FS_AIO_NR=18,	/* current system-wide number of aio requests */
-	FS_AIO_MAX_NR=19,	/* system-wide maximum number of aio requests */
-	FS_INOTIFY=20,	/* inotify submenu */
-	FS_OCFS2=988,	/* ocfs2 */
-};
-
-/* /proc/sys/fs/quota/ */
-enum {
-	FS_DQ_LOOKUPS = 1,
-	FS_DQ_DROPS = 2,
-	FS_DQ_READS = 3,
-	FS_DQ_WRITES = 4,
-	FS_DQ_CACHE_HITS = 5,
-	FS_DQ_ALLOCATED = 6,
-	FS_DQ_FREE = 7,
-	FS_DQ_SYNCS = 8,
-	FS_DQ_WARNINGS = 9,
-};
-
-/* CTL_DEBUG names: */
-
-/* CTL_DEV names: */
-enum {
-	DEV_CDROM=1,
-	DEV_HWMON=2,
-	DEV_PARPORT=3,
-	DEV_RAID=4,
-	DEV_MAC_HID=5,
-	DEV_SCSI=6,
-	DEV_IPMI=7,
-};
-
-/* /proc/sys/dev/cdrom */
-enum {
-	DEV_CDROM_INFO=1,
-	DEV_CDROM_AUTOCLOSE=2,
-	DEV_CDROM_AUTOEJECT=3,
-	DEV_CDROM_DEBUG=4,
-	DEV_CDROM_LOCK=5,
-	DEV_CDROM_CHECK_MEDIA=6
-};
-
-/* /proc/sys/dev/parport */
-enum {
-	DEV_PARPORT_DEFAULT=-3
-};
-
-/* /proc/sys/dev/raid */
-enum {
-	DEV_RAID_SPEED_LIMIT_MIN=1,
-	DEV_RAID_SPEED_LIMIT_MAX=2
-};
-
-/* /proc/sys/dev/parport/default */
-enum {
-	DEV_PARPORT_DEFAULT_TIMESLICE=1,
-	DEV_PARPORT_DEFAULT_SPINTIME=2
-};
-
-/* /proc/sys/dev/parport/parport n */
-enum {
-	DEV_PARPORT_SPINTIME=1,
-	DEV_PARPORT_BASE_ADDR=2,
-	DEV_PARPORT_IRQ=3,
-	DEV_PARPORT_DMA=4,
-	DEV_PARPORT_MODES=5,
-	DEV_PARPORT_DEVICES=6,
-	DEV_PARPORT_AUTOPROBE=16
-};
-
-/* /proc/sys/dev/parport/parport n/devices/ */
-enum {
-	DEV_PARPORT_DEVICES_ACTIVE=-3,
-};
-
-/* /proc/sys/dev/parport/parport n/devices/device n */
-enum {
-	DEV_PARPORT_DEVICE_TIMESLICE=1,
-};
-
-/* /proc/sys/dev/mac_hid */
-enum {
-	DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
-	DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
-	DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
-	DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
-	DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
-	DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
-};
-
-/* /proc/sys/dev/scsi */
-enum {
-	DEV_SCSI_LOGGING_LEVEL=1,
-};
-
-/* /proc/sys/dev/ipmi */
-enum {
-	DEV_IPMI_POWEROFF_POWERCYCLE=1,
-};
-
-/* /proc/sys/abi */
-enum
-{
-	ABI_DEFHANDLER_COFF=1,	/* default handler for coff binaries */
-	ABI_DEFHANDLER_ELF=2, 	/* default handler for ELF binaries */
-	ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
-	ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
-	ABI_TRACE=5,		/* tracing flags */
-	ABI_FAKE_UTSNAME=6,	/* fake target utsname information */
-};
-
-#ifdef __KERNEL__
 #include <linux/list.h>
 #include <linux/rcupdate.h>
 #include <linux/wait.h>
 #include <linux/rbtree.h>
+#include <uapi/linux/sysctl.h>
 
 /* For the /proc/sys support */
 struct ctl_table;
@@ -1122,6 +215,4 @@ static inline void setup_sysctl_set(struct ctl_table_set *p,
 
 #endif /* CONFIG_SYSCTL */
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SYSCTL_H */
diff --git a/include/linux/sysinfo.h b/include/linux/sysinfo.h
deleted file mode 100644
index 934335a22522..000000000000
--- a/include/linux/sysinfo.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _LINUX_SYSINFO_H
-#define _LINUX_SYSINFO_H
-
-#include <linux/types.h>
-
-#define SI_LOAD_SHIFT	16
-struct sysinfo {
-	__kernel_long_t uptime;		/* Seconds since boot */
-	__kernel_ulong_t loads[3];	/* 1, 5, and 15 minute load averages */
-	__kernel_ulong_t totalram;	/* Total usable main memory size */
-	__kernel_ulong_t freeram;	/* Available memory size */
-	__kernel_ulong_t sharedram;	/* Amount of shared memory */
-	__kernel_ulong_t bufferram;	/* Memory used by buffers */
-	__kernel_ulong_t totalswap;	/* Total swap space size */
-	__kernel_ulong_t freeswap;	/* swap space still available */
-	__u16 procs;		   	/* Number of current processes */
-	__u16 pad;		   	/* Explicit padding for m68k */
-	__kernel_ulong_t totalhigh;	/* Total high memory size */
-	__kernel_ulong_t freehigh;	/* Available high memory size */
-	__u32 mem_unit;			/* Memory unit size in bytes */
-	char _f[20-2*sizeof(__kernel_ulong_t)-sizeof(__u32)];	/* Padding: libc5 uses this.. */
-};
-
-#endif /* _LINUX_SYSINFO_H */
diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h
deleted file mode 100644
index 2466e550a41d..000000000000
--- a/include/linux/taskstats.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* taskstats.h - exporting per-task statistics
- *
- * Copyright (C) Shailabh Nagar, IBM Corp. 2006
- *           (C) Balbir Singh,   IBM Corp. 2006
- *           (C) Jay Lan,        SGI, 2006
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2.1 of the GNU Lesser General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _LINUX_TASKSTATS_H
-#define _LINUX_TASKSTATS_H
-
-#include <linux/types.h>
-
-/* Format for per-task data returned to userland when
- *	- a task exits
- *	- listener requests stats for a task
- *
- * The struct is versioned. Newer versions should only add fields to
- * the bottom of the struct to maintain backward compatibility.
- *
- *
- * To add new fields
- *	a) bump up TASKSTATS_VERSION
- *	b) add comment indicating new version number at end of struct
- *	c) add new fields after version comment; maintain 64-bit alignment
- */
-
-
-#define TASKSTATS_VERSION	8
-#define TS_COMM_LEN		32	/* should be >= TASK_COMM_LEN
-					 * in linux/sched.h */
-
-struct taskstats {
-
-	/* The version number of this struct. This field is always set to
-	 * TAKSTATS_VERSION, which is defined in <linux/taskstats.h>.
-	 * Each time the struct is changed, the value should be incremented.
-	 */
-	__u16	version;
-	__u32	ac_exitcode;		/* Exit status */
-
-	/* The accounting flags of a task as defined in <linux/acct.h>
-	 * Defined values are AFORK, ASU, ACOMPAT, ACORE, and AXSIG.
-	 */
-	__u8	ac_flag;		/* Record flags */
-	__u8	ac_nice;		/* task_nice */
-
-	/* Delay accounting fields start
-	 *
-	 * All values, until comment "Delay accounting fields end" are
-	 * available only if delay accounting is enabled, even though the last
-	 * few fields are not delays
-	 *
-	 * xxx_count is the number of delay values recorded
-	 * xxx_delay_total is the corresponding cumulative delay in nanoseconds
-	 *
-	 * xxx_delay_total wraps around to zero on overflow
-	 * xxx_count incremented regardless of overflow
-	 */
-
-	/* Delay waiting for cpu, while runnable
-	 * count, delay_total NOT updated atomically
-	 */
-	__u64	cpu_count __attribute__((aligned(8)));
-	__u64	cpu_delay_total;
-
-	/* Following four fields atomically updated using task->delays->lock */
-
-	/* Delay waiting for synchronous block I/O to complete
-	 * does not account for delays in I/O submission
-	 */
-	__u64	blkio_count;
-	__u64	blkio_delay_total;
-
-	/* Delay waiting for page fault I/O (swap in only) */
-	__u64	swapin_count;
-	__u64	swapin_delay_total;
-
-	/* cpu "wall-clock" running time
-	 * On some architectures, value will adjust for cpu time stolen
-	 * from the kernel in involuntary waits due to virtualization.
-	 * Value is cumulative, in nanoseconds, without a corresponding count
-	 * and wraps around to zero silently on overflow
-	 */
-	__u64	cpu_run_real_total;
-
-	/* cpu "virtual" running time
-	 * Uses time intervals seen by the kernel i.e. no adjustment
-	 * for kernel's involuntary waits due to virtualization.
-	 * Value is cumulative, in nanoseconds, without a corresponding count
-	 * and wraps around to zero silently on overflow
-	 */
-	__u64	cpu_run_virtual_total;
-	/* Delay accounting fields end */
-	/* version 1 ends here */
-
-	/* Basic Accounting Fields start */
-	char	ac_comm[TS_COMM_LEN];	/* Command name */
-	__u8	ac_sched __attribute__((aligned(8)));
-					/* Scheduling discipline */
-	__u8	ac_pad[3];
-	__u32	ac_uid __attribute__((aligned(8)));
-					/* User ID */
-	__u32	ac_gid;			/* Group ID */
-	__u32	ac_pid;			/* Process ID */
-	__u32	ac_ppid;		/* Parent process ID */
-	__u32	ac_btime;		/* Begin time [sec since 1970] */
-	__u64	ac_etime __attribute__((aligned(8)));
-					/* Elapsed time [usec] */
-	__u64	ac_utime;		/* User CPU time [usec] */
-	__u64	ac_stime;		/* SYstem CPU time [usec] */
-	__u64	ac_minflt;		/* Minor Page Fault Count */
-	__u64	ac_majflt;		/* Major Page Fault Count */
-	/* Basic Accounting Fields end */
-
-	/* Extended accounting fields start */
-	/* Accumulated RSS usage in duration of a task, in MBytes-usecs.
-	 * The current rss usage is added to this counter every time
-	 * a tick is charged to a task's system time. So, at the end we
-	 * will have memory usage multiplied by system time. Thus an
-	 * average usage per system time unit can be calculated.
-	 */
-	__u64	coremem;		/* accumulated RSS usage in MB-usec */
-	/* Accumulated virtual memory usage in duration of a task.
-	 * Same as acct_rss_mem1 above except that we keep track of VM usage.
-	 */
-	__u64	virtmem;		/* accumulated VM  usage in MB-usec */
-
-	/* High watermark of RSS and virtual memory usage in duration of
-	 * a task, in KBytes.
-	 */
-	__u64	hiwater_rss;		/* High-watermark of RSS usage, in KB */
-	__u64	hiwater_vm;		/* High-water VM usage, in KB */
-
-	/* The following four fields are I/O statistics of a task. */
-	__u64	read_char;		/* bytes read */
-	__u64	write_char;		/* bytes written */
-	__u64	read_syscalls;		/* read syscalls */
-	__u64	write_syscalls;		/* write syscalls */
-	/* Extended accounting fields end */
-
-#define TASKSTATS_HAS_IO_ACCOUNTING
-	/* Per-task storage I/O accounting starts */
-	__u64	read_bytes;		/* bytes of read I/O */
-	__u64	write_bytes;		/* bytes of write I/O */
-	__u64	cancelled_write_bytes;	/* bytes of cancelled write I/O */
-
-	__u64  nvcsw;			/* voluntary_ctxt_switches */
-	__u64  nivcsw;			/* nonvoluntary_ctxt_switches */
-
-	/* time accounting for SMT machines */
-	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
-	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
-	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
-
-	/* Delay waiting for memory reclaim */
-	__u64	freepages_count;
-	__u64	freepages_delay_total;
-};
-
-
-/*
- * Commands sent from userspace
- * Not versioned. New commands should only be inserted at the enum's end
- * prior to __TASKSTATS_CMD_MAX
- */
-
-enum {
-	TASKSTATS_CMD_UNSPEC = 0,	/* Reserved */
-	TASKSTATS_CMD_GET,		/* user->kernel request/get-response */
-	TASKSTATS_CMD_NEW,		/* kernel->user event */
-	__TASKSTATS_CMD_MAX,
-};
-
-#define TASKSTATS_CMD_MAX (__TASKSTATS_CMD_MAX - 1)
-
-enum {
-	TASKSTATS_TYPE_UNSPEC = 0,	/* Reserved */
-	TASKSTATS_TYPE_PID,		/* Process id */
-	TASKSTATS_TYPE_TGID,		/* Thread group id */
-	TASKSTATS_TYPE_STATS,		/* taskstats structure */
-	TASKSTATS_TYPE_AGGR_PID,	/* contains pid + stats */
-	TASKSTATS_TYPE_AGGR_TGID,	/* contains tgid + stats */
-	TASKSTATS_TYPE_NULL,		/* contains nothing */
-	__TASKSTATS_TYPE_MAX,
-};
-
-#define TASKSTATS_TYPE_MAX (__TASKSTATS_TYPE_MAX - 1)
-
-enum {
-	TASKSTATS_CMD_ATTR_UNSPEC = 0,
-	TASKSTATS_CMD_ATTR_PID,
-	TASKSTATS_CMD_ATTR_TGID,
-	TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
-	TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
-	__TASKSTATS_CMD_ATTR_MAX,
-};
-
-#define TASKSTATS_CMD_ATTR_MAX (__TASKSTATS_CMD_ATTR_MAX - 1)
-
-/* NETLINK_GENERIC related info */
-
-#define TASKSTATS_GENL_NAME	"TASKSTATS"
-#define TASKSTATS_GENL_VERSION	0x1
-
-#endif /* _LINUX_TASKSTATS_H */
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 67c789ae719c..8a7fc4be2d75 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -17,217 +17,13 @@
 #ifndef _LINUX_TCP_H
 #define _LINUX_TCP_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-struct tcphdr {
-	__be16	source;
-	__be16	dest;
-	__be32	seq;
-	__be32	ack_seq;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u16	res1:4,
-		doff:4,
-		fin:1,
-		syn:1,
-		rst:1,
-		psh:1,
-		ack:1,
-		urg:1,
-		ece:1,
-		cwr:1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u16	doff:4,
-		res1:4,
-		cwr:1,
-		ece:1,
-		urg:1,
-		ack:1,
-		psh:1,
-		rst:1,
-		syn:1,
-		fin:1;
-#else
-#error	"Adjust your <asm/byteorder.h> defines"
-#endif	
-	__be16	window;
-	__sum16	check;
-	__be16	urg_ptr;
-};
-
-/*
- *	The union cast uses a gcc extension to avoid aliasing problems
- *  (union is compatible to any of its members)
- *  This means this part of the code is -fstrict-aliasing safe now.
- */
-union tcp_word_hdr { 
-	struct tcphdr hdr;
-	__be32 		  words[5];
-}; 
-
-#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
-
-enum { 
-	TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
-	TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
-	TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
-	TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
-	TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
-	TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
-	TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
-	TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
-	TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
-	TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
-}; 
-
-/*
- * TCP general constants
- */
-#define TCP_MSS_DEFAULT		 536U	/* IPv4 (RFC1122, RFC2581) */
-#define TCP_MSS_DESIRED		1220U	/* IPv6 (tunneled), EDNS0 (RFC3226) */
-
-/* TCP socket options */
-#define TCP_NODELAY		1	/* Turn off Nagle's algorithm. */
-#define TCP_MAXSEG		2	/* Limit MSS */
-#define TCP_CORK		3	/* Never send partially complete segments */
-#define TCP_KEEPIDLE		4	/* Start keeplives after this period */
-#define TCP_KEEPINTVL		5	/* Interval between keepalives */
-#define TCP_KEEPCNT		6	/* Number of keepalives before death */
-#define TCP_SYNCNT		7	/* Number of SYN retransmits */
-#define TCP_LINGER2		8	/* Life time of orphaned FIN-WAIT-2 state */
-#define TCP_DEFER_ACCEPT	9	/* Wake up listener only when data arrive */
-#define TCP_WINDOW_CLAMP	10	/* Bound advertised window */
-#define TCP_INFO		11	/* Information about this connection. */
-#define TCP_QUICKACK		12	/* Block/reenable quick acks */
-#define TCP_CONGESTION		13	/* Congestion control algorithm */
-#define TCP_MD5SIG		14	/* TCP MD5 Signature (RFC2385) */
-#define TCP_COOKIE_TRANSACTIONS	15	/* TCP Cookie Transactions */
-#define TCP_THIN_LINEAR_TIMEOUTS 16      /* Use linear timeouts for thin streams*/
-#define TCP_THIN_DUPACK         17      /* Fast retrans. after 1 dupack */
-#define TCP_USER_TIMEOUT	18	/* How long for loss retry before timeout */
-#define TCP_REPAIR		19	/* TCP sock is under repair right now */
-#define TCP_REPAIR_QUEUE	20
-#define TCP_QUEUE_SEQ		21
-#define TCP_REPAIR_OPTIONS	22
-#define TCP_FASTOPEN		23	/* Enable FastOpen on listeners */
-
-struct tcp_repair_opt {
-	__u32	opt_code;
-	__u32	opt_val;
-};
-
-enum {
-	TCP_NO_QUEUE,
-	TCP_RECV_QUEUE,
-	TCP_SEND_QUEUE,
-	TCP_QUEUES_NR,
-};
-
-/* for TCP_INFO socket option */
-#define TCPI_OPT_TIMESTAMPS	1
-#define TCPI_OPT_SACK		2
-#define TCPI_OPT_WSCALE		4
-#define TCPI_OPT_ECN		8 /* ECN was negociated at TCP session init */
-#define TCPI_OPT_ECN_SEEN	16 /* we received at least one packet with ECT */
-
-enum tcp_ca_state {
-	TCP_CA_Open = 0,
-#define TCPF_CA_Open	(1<<TCP_CA_Open)
-	TCP_CA_Disorder = 1,
-#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
-	TCP_CA_CWR = 2,
-#define TCPF_CA_CWR	(1<<TCP_CA_CWR)
-	TCP_CA_Recovery = 3,
-#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
-	TCP_CA_Loss = 4
-#define TCPF_CA_Loss	(1<<TCP_CA_Loss)
-};
-
-struct tcp_info {
-	__u8	tcpi_state;
-	__u8	tcpi_ca_state;
-	__u8	tcpi_retransmits;
-	__u8	tcpi_probes;
-	__u8	tcpi_backoff;
-	__u8	tcpi_options;
-	__u8	tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
-
-	__u32	tcpi_rto;
-	__u32	tcpi_ato;
-	__u32	tcpi_snd_mss;
-	__u32	tcpi_rcv_mss;
-
-	__u32	tcpi_unacked;
-	__u32	tcpi_sacked;
-	__u32	tcpi_lost;
-	__u32	tcpi_retrans;
-	__u32	tcpi_fackets;
-
-	/* Times. */
-	__u32	tcpi_last_data_sent;
-	__u32	tcpi_last_ack_sent;     /* Not remembered, sorry. */
-	__u32	tcpi_last_data_recv;
-	__u32	tcpi_last_ack_recv;
-
-	/* Metrics. */
-	__u32	tcpi_pmtu;
-	__u32	tcpi_rcv_ssthresh;
-	__u32	tcpi_rtt;
-	__u32	tcpi_rttvar;
-	__u32	tcpi_snd_ssthresh;
-	__u32	tcpi_snd_cwnd;
-	__u32	tcpi_advmss;
-	__u32	tcpi_reordering;
-
-	__u32	tcpi_rcv_rtt;
-	__u32	tcpi_rcv_space;
-
-	__u32	tcpi_total_retrans;
-};
-
-/* for TCP_MD5SIG socket option */
-#define TCP_MD5SIG_MAXKEYLEN	80
-
-struct tcp_md5sig {
-	struct __kernel_sockaddr_storage tcpm_addr;	/* address associated */
-	__u16	__tcpm_pad1;				/* zero */
-	__u16	tcpm_keylen;				/* key length */
-	__u32	__tcpm_pad2;				/* zero */
-	__u8	tcpm_key[TCP_MD5SIG_MAXKEYLEN];		/* key (binary) */
-};
-
-/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
-#define TCP_COOKIE_MIN		 8		/*  64-bits */
-#define TCP_COOKIE_MAX		16		/* 128-bits */
-#define TCP_COOKIE_PAIR_SIZE	(2*TCP_COOKIE_MAX)
-
-/* Flags for both getsockopt and setsockopt */
-#define TCP_COOKIE_IN_ALWAYS	(1 << 0)	/* Discard SYN without cookie */
-#define TCP_COOKIE_OUT_NEVER	(1 << 1)	/* Prohibit outgoing cookies,
-						 * supercedes everything. */
-
-/* Flags for getsockopt */
-#define TCP_S_DATA_IN		(1 << 2)	/* Was data received? */
-#define TCP_S_DATA_OUT		(1 << 3)	/* Was data sent? */
-
-/* TCP_COOKIE_TRANSACTIONS data */
-struct tcp_cookie_transactions {
-	__u16	tcpct_flags;			/* see above */
-	__u8	__tcpct_pad1;			/* zero */
-	__u8	tcpct_cookie_desired;		/* bytes */
-	__u16	tcpct_s_data_desired;		/* bytes of variable data */
-	__u16	tcpct_used;			/* bytes in value */
-	__u8	tcpct_value[TCP_MSS_DEFAULT];
-};
-
-#ifdef __KERNEL__
 
 #include <linux/skbuff.h>
 #include <linux/dmaengine.h>
 #include <net/sock.h>
 #include <net/inet_connection_sock.h>
 #include <net/inet_timewait_sock.h>
+#include <uapi/linux/tcp.h>
 
 static inline struct tcphdr *tcp_hdr(const struct sk_buff *skb)
 {
@@ -595,6 +391,4 @@ static inline int fastopen_init_queue(struct sock *sk, int backlog)
 	return 0;
 }
 
-#endif	/* __KERNEL__ */
-
 #endif	/* _LINUX_TCP_H */
diff --git a/include/linux/tcp_metrics.h b/include/linux/tcp_metrics.h
deleted file mode 100644
index cb5157b55f32..000000000000
--- a/include/linux/tcp_metrics.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* tcp_metrics.h - TCP Metrics Interface */
-
-#ifndef _LINUX_TCP_METRICS_H
-#define _LINUX_TCP_METRICS_H
-
-#include <linux/types.h>
-
-/* NETLINK_GENERIC related info
- */
-#define TCP_METRICS_GENL_NAME		"tcp_metrics"
-#define TCP_METRICS_GENL_VERSION	0x1
-
-enum tcp_metric_index {
-	TCP_METRIC_RTT,
-	TCP_METRIC_RTTVAR,
-	TCP_METRIC_SSTHRESH,
-	TCP_METRIC_CWND,
-	TCP_METRIC_REORDERING,
-
-	/* Always last.  */
-	__TCP_METRIC_MAX,
-};
-
-#define TCP_METRIC_MAX	(__TCP_METRIC_MAX - 1)
-
-enum {
-	TCP_METRICS_ATTR_UNSPEC,
-	TCP_METRICS_ATTR_ADDR_IPV4,		/* u32 */
-	TCP_METRICS_ATTR_ADDR_IPV6,		/* binary */
-	TCP_METRICS_ATTR_AGE,			/* msecs */
-	TCP_METRICS_ATTR_TW_TSVAL,		/* u32, raw, rcv tsval */
-	TCP_METRICS_ATTR_TW_TS_STAMP,		/* s32, sec age */
-	TCP_METRICS_ATTR_VALS,			/* nested +1, u32 */
-	TCP_METRICS_ATTR_FOPEN_MSS,		/* u16 */
-	TCP_METRICS_ATTR_FOPEN_SYN_DROPS,	/* u16, count of drops */
-	TCP_METRICS_ATTR_FOPEN_SYN_DROP_TS,	/* msecs age */
-	TCP_METRICS_ATTR_FOPEN_COOKIE,		/* binary */
-
-	__TCP_METRICS_ATTR_MAX,
-};
-
-#define TCP_METRICS_ATTR_MAX	(__TCP_METRICS_ATTR_MAX - 1)
-
-enum {
-	TCP_METRICS_CMD_UNSPEC,
-	TCP_METRICS_CMD_GET,
-	TCP_METRICS_CMD_DEL,
-
-	__TCP_METRICS_CMD_MAX,
-};
-
-#define TCP_METRICS_CMD_MAX	(__TCP_METRICS_CMD_MAX - 1)
-
-#endif /* _LINUX_TCP_METRICS_H */
diff --git a/include/linux/telephony.h b/include/linux/telephony.h
deleted file mode 100644
index f63afe330add..000000000000
--- a/include/linux/telephony.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/******************************************************************************
- *
- *		telephony.h
- *
- *		Basic Linux Telephony Interface
- *
- *		(c) Copyright 1999-2001 Quicknet Technologies, Inc.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- *    Authors:       Ed Okerson, <eokerson@quicknet.net>
- *                   Greg Herlein, <gherlein@quicknet.net>
- *
- *    Contributors:  Alan Cox, <alan@lxorguk.ukuu.org.uk>
- *                   David W. Erhart, <derhart@quicknet.net>
- *
- * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
- * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
- * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- *****************************************************************************/
-
-#ifndef TELEPHONY_H
-#define TELEPHONY_H
-
-#define TELEPHONY_VERSION 3013
-
-#define PHONE_VENDOR_IXJ          1
-#define PHONE_VENDOR_QUICKNET	  PHONE_VENDOR_IXJ
-#define PHONE_VENDOR_VOICETRONIX  2
-#define PHONE_VENDOR_ACULAB       3
-#define PHONE_VENDOR_DIGI         4
-#define PHONE_VENDOR_FRANKLIN     5
-
-/******************************************************************************
- *  Vendor Summary Information Area
- *
- *  Quicknet Technologies, Inc. - makes low density analog telephony cards
- *    with audio compression, POTS and PSTN interfaces (www.quicknet.net)
- *
- *  (other vendors following this API shuld add a short description of
- *  the telephony products they support under Linux)
- *
- *****************************************************************************/
-#define QTI_PHONEJACK		100
-#define QTI_LINEJACK		300
-#define QTI_PHONEJACK_LITE	400
-#define QTI_PHONEJACK_PCI	500
-#define QTI_PHONECARD		600
-
-/******************************************************************************
-*
-* The capabilities ioctls can inform you of the capabilities of each phone
-* device installed in your system.  The PHONECTL_CAPABILITIES ioctl
-* returns an integer value indicating the number of capabilities the   
-* device has.  The PHONECTL_CAPABILITIES_LIST will fill an array of 
-* capability structs with all of its capabilities.  The
-* PHONECTL_CAPABILITIES_CHECK takes a single capability struct and returns
-* a TRUE if the device has that capability, otherwise it returns false.
-* 
-******************************************************************************/
-typedef enum {
-	vendor = 0,
-	device,
-	port,
-	codec,
-	dsp
-} phone_cap;
-
-struct phone_capability {
-	char desc[80];
-	phone_cap captype;
-	int cap;
-	int handle;
-};
-
-typedef enum {
-	pots = 0,
-	pstn,
-	handset,
-	speaker
-} phone_ports;
-
-#define PHONE_CAPABILITIES              _IO  ('q', 0x80)
-#define PHONE_CAPABILITIES_LIST         _IOR ('q', 0x81, struct phone_capability *)
-#define PHONE_CAPABILITIES_CHECK        _IOW ('q', 0x82, struct phone_capability *)
-
-typedef struct {
-        char month[3];
-        char day[3];
-        char hour[3];
-        char min[3];
-        int numlen;
-        char number[11];
-        int namelen;
-        char name[80];
-} PHONE_CID;
- 
-#define PHONE_RING			_IO  ('q', 0x83)
-#define PHONE_HOOKSTATE			_IO  ('q', 0x84)
-#define PHONE_MAXRINGS			_IOW ('q', 0x85, char)
-#define PHONE_RING_CADENCE		_IOW ('q', 0x86, short)
-#define OLD_PHONE_RING_START            _IO  ('q', 0x87)
-#define PHONE_RING_START		_IOW ('q', 0x87, PHONE_CID *)
-#define PHONE_RING_STOP			_IO  ('q', 0x88)
-
-#define USA_RING_CADENCE	 0xC0C0
-
-#define PHONE_REC_CODEC			_IOW ('q', 0x89, int)
-#define PHONE_REC_START			_IO  ('q', 0x8A)
-#define PHONE_REC_STOP			_IO  ('q', 0x8B)
-#define PHONE_REC_DEPTH			_IOW ('q', 0x8C, int)
-#define PHONE_FRAME			_IOW ('q', 0x8D, int)
-#define PHONE_REC_VOLUME		_IOW ('q', 0x8E, int)
-#define PHONE_REC_VOLUME_LINEAR		_IOW ('q', 0xDB, int)
-#define PHONE_REC_LEVEL			_IO  ('q', 0x8F)
-
-#define PHONE_PLAY_CODEC		_IOW ('q', 0x90, int)
-#define PHONE_PLAY_START		_IO  ('q', 0x91)
-#define PHONE_PLAY_STOP			_IO  ('q', 0x92)
-#define PHONE_PLAY_DEPTH		_IOW ('q', 0x93, int)
-#define PHONE_PLAY_VOLUME		_IOW ('q', 0x94, int)
-#define PHONE_PLAY_VOLUME_LINEAR	_IOW ('q', 0xDC, int)
-#define PHONE_PLAY_LEVEL		_IO  ('q', 0x95)
-#define PHONE_DTMF_READY		_IOR ('q', 0x96, int)
-#define PHONE_GET_DTMF			_IOR ('q', 0x97, int)
-#define PHONE_GET_DTMF_ASCII		_IOR ('q', 0x98, int)
-#define PHONE_DTMF_OOB			_IOW ('q', 0x99, int)
-#define PHONE_EXCEPTION			_IOR ('q', 0x9A, int)
-#define PHONE_PLAY_TONE			_IOW ('q', 0x9B, char)
-#define PHONE_SET_TONE_ON_TIME		_IOW ('q', 0x9C, int)
-#define PHONE_SET_TONE_OFF_TIME		_IOW ('q', 0x9D, int)
-#define PHONE_GET_TONE_ON_TIME		_IO  ('q', 0x9E)
-#define PHONE_GET_TONE_OFF_TIME		_IO  ('q', 0x9F)
-#define PHONE_GET_TONE_STATE		_IO  ('q', 0xA0)
-#define PHONE_BUSY			_IO  ('q', 0xA1)
-#define PHONE_RINGBACK			_IO  ('q', 0xA2)
-#define PHONE_DIALTONE			_IO  ('q', 0xA3)
-#define PHONE_CPT_STOP			_IO  ('q', 0xA4)
-
-#define PHONE_PSTN_SET_STATE		_IOW ('q', 0xA4, int)
-#define PHONE_PSTN_GET_STATE		_IO  ('q', 0xA5)
-
-#define PSTN_ON_HOOK		0
-#define PSTN_RINGING		1
-#define PSTN_OFF_HOOK		2
-#define PSTN_PULSE_DIAL		3
-
-/******************************************************************************
-* 
-* The wink duration is tunable with this ioctl.  The default wink duration  
-* is 320ms.  You do not need to use this ioctl if you do not require a
-* different wink duration.
-* 
-******************************************************************************/
-#define PHONE_WINK_DURATION		_IOW ('q', 0xA6, int)
-#define PHONE_WINK			_IOW ('q', 0xAA, int)
-
-/******************************************************************************
-* 
-*  Codec Definitions
-* 
-******************************************************************************/
-typedef enum {
-	G723_63 = 1,
-	G723_53 = 2,
-	TS85 = 3,
-	TS48 = 4,
-	TS41 = 5,
-	G728 = 6,
-	G729 = 7,
-	ULAW = 8,
-	ALAW = 9,
-	LINEAR16 = 10,
-	LINEAR8 = 11,
-	WSS = 12,
-	G729B = 13
-} phone_codec;
-
-struct phone_codec_data
-{
-        phone_codec type;
-        unsigned short buf_min, buf_opt, buf_max;
-};
-
-#define PHONE_QUERY_CODEC               _IOWR ('q', 0xA7, struct phone_codec_data *)
-#define PHONE_PSTN_LINETEST             _IO ('q', 0xA8)
-
-/******************************************************************************
-* 
-* This controls the VAD/CNG functionality of G.723.1.  The driver will
-* always pass full size frames, any unused bytes will be padded with zeros,
-* and frames passed to the driver should also be padded with zeros.  The
-* frame type is encoded in the least significant two bits of the first
-* WORD of the frame as follows:
-*
-* bits 1-0	Frame Type	Data Rate		Significant Words
-* 00		0		G.723.1 6.3		12
-* 01		1		G.723.1 5.3		10
-* 10		2		VAD/CNG			 2
-* 11		3		Repeat last CNG		 2 bits
-* 
-******************************************************************************/
-#define PHONE_VAD			_IOW ('q', 0xA9, int)
-
-
-/******************************************************************************
-*
-* The exception structure allows us to multiplex multiple events onto the
-* select() exception set.  If any of these flags are set select() will
-* return with a positive indication on the exception set.  The dtmf_ready
-* bit indicates if there is data waiting in the DTMF buffer.  The
-* hookstate bit is set if there is a change in hookstate status, it does not
-* indicate the current state of the hookswitch.  The pstn_ring bit
-* indicates that the DAA on a LineJACK card has detected ring voltage on
-* the PSTN port.  The caller_id bit indicates that caller_id data has been
-* received and is available.  The pstn_wink bit indicates that the DAA on
-* the LineJACK has received a wink from the telco switch.  The f0, f1, f2
-* and f3 bits indicate that the filter has been triggered by detecting the
-* frequency programmed into that filter.
-*
-* The remaining bits should be set to zero. They will become defined over time
-* for other interface cards and their needs.
-*
-******************************************************************************/
-struct phone_except
-{
-	unsigned int dtmf_ready:1;
-	unsigned int hookstate:1;
-	unsigned int pstn_ring:1;
-	unsigned int caller_id:1;
-	unsigned int pstn_wink:1;
-	unsigned int f0:1;
-	unsigned int f1:1;
-	unsigned int f2:1;
-	unsigned int f3:1;
-	unsigned int flash:1;
-	unsigned int fc0:1;
-	unsigned int fc1:1;
-	unsigned int fc2:1;
-	unsigned int fc3:1;
-	unsigned int reserved:18;
-};
-
-union telephony_exception {
-	struct phone_except bits;
-	unsigned int bytes;
-};
-
-
-#endif		/* TELEPHONY_H */
-
diff --git a/include/linux/termios.h b/include/linux/termios.h
deleted file mode 100644
index 2acd0c1f8a2a..000000000000
--- a/include/linux/termios.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _LINUX_TERMIOS_H
-#define _LINUX_TERMIOS_H
-
-#include <linux/types.h>
-#include <asm/termios.h>
-
-#define NFF	5
-
-struct termiox
-{
-	__u16	x_hflag;
-	__u16	x_cflag;
-	__u16	x_rflag[NFF];
-	__u16	x_sflag;
-};
-
-#define	RTSXOFF		0x0001		/* RTS flow control on input */
-#define	CTSXON		0x0002		/* CTS flow control on output */
-#define	DTRXOFF		0x0004		/* DTR flow control on input */
-#define DSRXON		0x0008		/* DCD flow control on output */
-
-#endif
diff --git a/include/linux/time.h b/include/linux/time.h
index b51e664c83e7..4d358e9d10f1 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -1,33 +1,10 @@
 #ifndef _LINUX_TIME_H
 #define _LINUX_TIME_H
 
-#include <linux/types.h>
-
-#ifdef __KERNEL__
 # include <linux/cache.h>
 # include <linux/seqlock.h>
 # include <linux/math64.h>
-#endif
-
-#ifndef _STRUCT_TIMESPEC
-#define _STRUCT_TIMESPEC
-struct timespec {
-	__kernel_time_t	tv_sec;			/* seconds */
-	long		tv_nsec;		/* nanoseconds */
-};
-#endif
-
-struct timeval {
-	__kernel_time_t		tv_sec;		/* seconds */
-	__kernel_suseconds_t	tv_usec;	/* microseconds */
-};
-
-struct timezone {
-	int	tz_minuteswest;	/* minutes west of Greenwich */
-	int	tz_dsttime;	/* type of dst correction */
-};
-
-#ifdef __KERNEL__
+#include <uapi/linux/time.h>
 
 extern struct timezone sys_tz;
 
@@ -280,51 +257,4 @@ static __always_inline void timespec_add_ns(struct timespec *a, u64 ns)
 	a->tv_nsec = ns;
 }
 
-#endif /* __KERNEL__ */
-
-/*
- * Names of the interval timers, and structure
- * defining a timer setting:
- */
-#define	ITIMER_REAL		0
-#define	ITIMER_VIRTUAL		1
-#define	ITIMER_PROF		2
-
-struct itimerspec {
-	struct timespec it_interval;	/* timer period */
-	struct timespec it_value;	/* timer expiration */
-};
-
-struct itimerval {
-	struct timeval it_interval;	/* timer interval */
-	struct timeval it_value;	/* current value */
-};
-
-/*
- * The IDs of the various system clocks (for POSIX.1b interval timers):
- */
-#define CLOCK_REALTIME			0
-#define CLOCK_MONOTONIC			1
-#define CLOCK_PROCESS_CPUTIME_ID	2
-#define CLOCK_THREAD_CPUTIME_ID		3
-#define CLOCK_MONOTONIC_RAW		4
-#define CLOCK_REALTIME_COARSE		5
-#define CLOCK_MONOTONIC_COARSE		6
-#define CLOCK_BOOTTIME			7
-#define CLOCK_REALTIME_ALARM		8
-#define CLOCK_BOOTTIME_ALARM		9
-
-/*
- * The IDs of various hardware clocks:
- */
-#define CLOCK_SGI_CYCLE			10
-#define MAX_CLOCKS			16
-#define CLOCKS_MASK			(CLOCK_REALTIME | CLOCK_MONOTONIC)
-#define CLOCKS_MONO			CLOCK_MONOTONIC
-
-/*
- * The various flags for setting POSIX.1b interval timers:
- */
-#define TIMER_ABSTIME			0x01
-
 #endif
diff --git a/include/linux/times.h b/include/linux/times.h
deleted file mode 100644
index 87b62615cedd..000000000000
--- a/include/linux/times.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _LINUX_TIMES_H
-#define _LINUX_TIMES_H
-
-#include <linux/types.h>
-
-struct tms {
-	__kernel_clock_t tms_utime;
-	__kernel_clock_t tms_stime;
-	__kernel_clock_t tms_cutime;
-	__kernel_clock_t tms_cstime;
-};
-
-#endif
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 7c5ceb20e03a..5ec87c60b97c 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -53,120 +53,11 @@
 #ifndef _LINUX_TIMEX_H
 #define _LINUX_TIMEX_H
 
-#include <linux/time.h>
+#include <uapi/linux/timex.h>
 
-#define NTP_API		4	/* NTP API version */
-
-/*
- * syscall interface - used (mainly by NTP daemon)
- * to discipline kernel clock oscillator
- */
-struct timex {
-	unsigned int modes;	/* mode selector */
-	long offset;		/* time offset (usec) */
-	long freq;		/* frequency offset (scaled ppm) */
-	long maxerror;		/* maximum error (usec) */
-	long esterror;		/* estimated error (usec) */
-	int status;		/* clock command/status */
-	long constant;		/* pll time constant */
-	long precision;		/* clock precision (usec) (read only) */
-	long tolerance;		/* clock frequency tolerance (ppm)
-				 * (read only)
-				 */
-	struct timeval time;	/* (read only, except for ADJ_SETOFFSET) */
-	long tick;		/* (modified) usecs between clock ticks */
-
-	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
-	long jitter;            /* pps jitter (us) (ro) */
-	int shift;              /* interval duration (s) (shift) (ro) */
-	long stabil;            /* pps stability (scaled ppm) (ro) */
-	long jitcnt;            /* jitter limit exceeded (ro) */
-	long calcnt;            /* calibration intervals (ro) */
-	long errcnt;            /* calibration errors (ro) */
-	long stbcnt;            /* stability limit exceeded (ro) */
-
-	int tai;		/* TAI offset (ro) */
-
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32;
-};
-
-/*
- * Mode codes (timex.mode)
- */
-#define ADJ_OFFSET		0x0001	/* time offset */
-#define ADJ_FREQUENCY		0x0002	/* frequency offset */
-#define ADJ_MAXERROR		0x0004	/* maximum time error */
-#define ADJ_ESTERROR		0x0008	/* estimated time error */
-#define ADJ_STATUS		0x0010	/* clock status */
-#define ADJ_TIMECONST		0x0020	/* pll time constant */
-#define ADJ_TAI			0x0080	/* set TAI offset */
-#define ADJ_SETOFFSET		0x0100  /* add 'time' to current time */
-#define ADJ_MICRO		0x1000	/* select microsecond resolution */
-#define ADJ_NANO		0x2000	/* select nanosecond resolution */
-#define ADJ_TICK		0x4000	/* tick value */
-
-#ifdef __KERNEL__
 #define ADJ_ADJTIME		0x8000	/* switch between adjtime/adjtimex modes */
 #define ADJ_OFFSET_SINGLESHOT	0x0001	/* old-fashioned adjtime */
 #define ADJ_OFFSET_READONLY	0x2000	/* read-only adjtime */
-#else
-#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
-#define ADJ_OFFSET_SS_READ	0xa001	/* read-only adjtime */
-#endif
-
-/* NTP userland likes the MOD_ prefix better */
-#define MOD_OFFSET	ADJ_OFFSET
-#define MOD_FREQUENCY	ADJ_FREQUENCY
-#define MOD_MAXERROR	ADJ_MAXERROR
-#define MOD_ESTERROR	ADJ_ESTERROR
-#define MOD_STATUS	ADJ_STATUS
-#define MOD_TIMECONST	ADJ_TIMECONST
-#define MOD_TAI	ADJ_TAI
-#define MOD_MICRO	ADJ_MICRO
-#define MOD_NANO	ADJ_NANO
-
-
-/*
- * Status codes (timex.status)
- */
-#define STA_PLL		0x0001	/* enable PLL updates (rw) */
-#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
-#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
-#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */
-
-#define STA_INS		0x0010	/* insert leap (rw) */
-#define STA_DEL		0x0020	/* delete leap (rw) */
-#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
-#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */
-
-#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
-#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
-#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
-#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
-
-#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
-#define STA_NANO	0x2000	/* resolution (0 = us, 1 = ns) (ro) */
-#define STA_MODE	0x4000	/* mode (0 = PLL, 1 = FLL) (ro) */
-#define STA_CLK		0x8000	/* clock source (0 = A, 1 = B) (ro) */
-
-/* read-only bits */
-#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
-	STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
-
-/*
- * Clock states (time_state)
- */
-#define TIME_OK		0	/* clock synchronized, no leap second */
-#define TIME_INS	1	/* insert leap second */
-#define TIME_DEL	2	/* delete leap second */
-#define TIME_OOP	3	/* leap second in progress */
-#define TIME_WAIT	4	/* leap second has occurred */
-#define TIME_ERROR	5	/* clock not synchronized */
-#define TIME_BAD	TIME_ERROR /* bw compat */
-
-#ifdef __KERNEL__
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/param.h>
@@ -261,6 +152,4 @@ int read_current_timer(unsigned long *timer_val);
 /* The clock frequency of the i8253/i8254 PIT */
 #define PIT_TICK_RATE 1193182ul
 
-#endif /* KERNEL */
-
 #endif /* LINUX_TIMEX_H */
diff --git a/include/linux/tiocl.h b/include/linux/tiocl.h
deleted file mode 100644
index 4756862c4ed4..000000000000
--- a/include/linux/tiocl.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef _LINUX_TIOCL_H
-#define _LINUX_TIOCL_H
-
-#define TIOCL_SETSEL	2	/* set a selection */
-#define 	TIOCL_SELCHAR	0	/* select characters */
-#define 	TIOCL_SELWORD	1	/* select whole words */
-#define 	TIOCL_SELLINE	2	/* select whole lines */
-#define 	TIOCL_SELPOINTER	3	/* show the pointer */
-#define 	TIOCL_SELCLEAR	4	/* clear visibility of selection */
-#define 	TIOCL_SELMOUSEREPORT	16	/* report beginning of selection */
-#define 	TIOCL_SELBUTTONMASK	15	/* button mask for report */
-/* selection extent */
-struct tiocl_selection {
-	unsigned short xs;	/* X start */
-	unsigned short ys;	/* Y start */
-	unsigned short xe;	/* X end */
-	unsigned short ye;	/* Y end */
-	unsigned short sel_mode;	/* selection mode */
-};
-
-#define TIOCL_PASTESEL	3	/* paste previous selection */
-#define TIOCL_UNBLANKSCREEN	4	/* unblank screen */
-
-#define TIOCL_SELLOADLUT	5
-	/* set characters to be considered alphabetic when selecting */
-	/* u32[8] bit array, 4 bytes-aligned with type */
-
-/* these two don't return a value: they write it back in the type */
-#define TIOCL_GETSHIFTSTATE	6	/* write shift state */
-#define TIOCL_GETMOUSEREPORTING	7	/* write whether mouse event are reported */
-#define TIOCL_SETVESABLANK	10	/* set vesa blanking mode */
-#define TIOCL_SETKMSGREDIRECT	11	/* restrict kernel messages to a vt */
-#define TIOCL_GETFGCONSOLE	12	/* get foreground vt */
-#define TIOCL_SCROLLCONSOLE	13	/* scroll console */
-#define TIOCL_BLANKSCREEN	14	/* keep screen blank even if a key is pressed */
-#define TIOCL_BLANKEDSCREEN	15	/* return which vt was blanked */
-#define TIOCL_GETKMSGREDIRECT	17	/* get the vt the kernel messages are restricted to */
-
-#endif /* _LINUX_TIOCL_H */
diff --git a/include/linux/tipc.h b/include/linux/tipc.h
deleted file mode 100644
index f2d90091cc20..000000000000
--- a/include/linux/tipc.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * include/linux/tipc.h: Include file for TIPC socket interface
- *
- * Copyright (c) 2003-2006, Ericsson AB
- * Copyright (c) 2005, 2010-2011, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _LINUX_TIPC_H_
-#define _LINUX_TIPC_H_
-
-#include <linux/types.h>
-
-/*
- * TIPC addressing primitives
- */
-
-struct tipc_portid {
-	__u32 ref;
-	__u32 node;
-};
-
-struct tipc_name {
-	__u32 type;
-	__u32 instance;
-};
-
-struct tipc_name_seq {
-	__u32 type;
-	__u32 lower;
-	__u32 upper;
-};
-
-static inline __u32 tipc_addr(unsigned int zone,
-			      unsigned int cluster,
-			      unsigned int node)
-{
-	return (zone << 24) | (cluster << 12) | node;
-}
-
-static inline unsigned int tipc_zone(__u32 addr)
-{
-	return addr >> 24;
-}
-
-static inline unsigned int tipc_cluster(__u32 addr)
-{
-	return (addr >> 12) & 0xfff;
-}
-
-static inline unsigned int tipc_node(__u32 addr)
-{
-	return addr & 0xfff;
-}
-
-/*
- * Application-accessible port name types
- */
-
-#define TIPC_CFG_SRV		0	/* configuration service name type */
-#define TIPC_TOP_SRV		1	/* topology service name type */
-#define TIPC_RESERVED_TYPES	64	/* lowest user-publishable name type */
-
-/*
- * Publication scopes when binding port names and port name sequences
- */
-
-#define TIPC_ZONE_SCOPE		1
-#define TIPC_CLUSTER_SCOPE	2
-#define TIPC_NODE_SCOPE		3
-
-/*
- * Limiting values for messages
- */
-
-#define TIPC_MAX_USER_MSG_SIZE	66000U
-
-/*
- * Message importance levels
- */
-
-#define TIPC_LOW_IMPORTANCE		0
-#define TIPC_MEDIUM_IMPORTANCE		1
-#define TIPC_HIGH_IMPORTANCE		2
-#define TIPC_CRITICAL_IMPORTANCE	3
-
-/*
- * Msg rejection/connection shutdown reasons
- */
-
-#define TIPC_OK			0
-#define TIPC_ERR_NO_NAME	1
-#define TIPC_ERR_NO_PORT	2
-#define TIPC_ERR_NO_NODE	3
-#define TIPC_ERR_OVERLOAD	4
-#define TIPC_CONN_SHUTDOWN	5
-
-/*
- * TIPC topology subscription service definitions
- */
-
-#define TIPC_SUB_PORTS		0x01	/* filter for port availability */
-#define TIPC_SUB_SERVICE	0x02	/* filter for service availability */
-#define TIPC_SUB_CANCEL		0x04	/* cancel a subscription */
-
-#define TIPC_WAIT_FOREVER	(~0)	/* timeout for permanent subscription */
-
-struct tipc_subscr {
-	struct tipc_name_seq seq;	/* name sequence of interest */
-	__u32 timeout;			/* subscription duration (in ms) */
-	__u32 filter;			/* bitmask of filter options */
-	char usr_handle[8];		/* available for subscriber use */
-};
-
-#define TIPC_PUBLISHED		1	/* publication event */
-#define TIPC_WITHDRAWN		2	/* withdraw event */
-#define TIPC_SUBSCR_TIMEOUT	3	/* subscription timeout event */
-
-struct tipc_event {
-	__u32 event;			/* event type */
-	__u32 found_lower;		/* matching name seq instances */
-	__u32 found_upper;		/*    "      "    "     "      */
-	struct tipc_portid port;	/* associated port */
-	struct tipc_subscr s;		/* associated subscription */
-};
-
-/*
- * Socket API
- */
-
-#ifndef AF_TIPC
-#define AF_TIPC		30
-#endif
-
-#ifndef PF_TIPC
-#define PF_TIPC		AF_TIPC
-#endif
-
-#ifndef SOL_TIPC
-#define SOL_TIPC	271
-#endif
-
-#define TIPC_ADDR_NAMESEQ	1
-#define TIPC_ADDR_MCAST		1
-#define TIPC_ADDR_NAME		2
-#define TIPC_ADDR_ID		3
-
-struct sockaddr_tipc {
-	unsigned short family;
-	unsigned char  addrtype;
-	signed   char  scope;
-	union {
-		struct tipc_portid id;
-		struct tipc_name_seq nameseq;
-		struct {
-			struct tipc_name name;
-			__u32 domain;
-		} name;
-	} addr;
-};
-
-/*
- * Ancillary data objects supported by recvmsg()
- */
-
-#define TIPC_ERRINFO	1	/* error info */
-#define TIPC_RETDATA	2	/* returned data */
-#define TIPC_DESTNAME	3	/* destination name */
-
-/*
- * TIPC-specific socket option values
- */
-
-#define TIPC_IMPORTANCE		127	/* Default: TIPC_LOW_IMPORTANCE */
-#define TIPC_SRC_DROPPABLE	128	/* Default: based on socket type */
-#define TIPC_DEST_DROPPABLE	129	/* Default: based on socket type */
-#define TIPC_CONN_TIMEOUT	130	/* Default: 8000 (ms)  */
-#define TIPC_NODE_RECVQ_DEPTH	131	/* Default: none (read only) */
-#define TIPC_SOCK_RECVQ_DEPTH	132	/* Default: none (read only) */
-
-#endif
diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h
deleted file mode 100644
index 0b1e3f218a36..000000000000
--- a/include/linux/tipc_config.h
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * include/linux/tipc_config.h: Include file for TIPC configuration interface
- *
- * Copyright (c) 2003-2006, Ericsson AB
- * Copyright (c) 2005-2007, 2010-2011, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _LINUX_TIPC_CONFIG_H_
-#define _LINUX_TIPC_CONFIG_H_
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
-
-#ifndef __KERNEL__
-#include <arpa/inet.h> /* for ntohs etc. */
-#endif
-
-/*
- * Configuration
- *
- * All configuration management messaging involves sending a request message
- * to the TIPC configuration service on a node, which sends a reply message
- * back.  (In the future multi-message replies may be supported.)
- *
- * Both request and reply messages consist of a transport header and payload.
- * The transport header contains info about the desired operation;
- * the payload consists of zero or more type/length/value (TLV) items
- * which specify parameters or results for the operation.
- *
- * For many operations, the request and reply messages have a fixed number
- * of TLVs (usually zero or one); however, some reply messages may return
- * a variable number of TLVs.  A failed request is denoted by the presence
- * of an "error string" TLV in the reply message instead of the TLV(s) the
- * reply should contain if the request succeeds.
- */
-
-/*
- * Public commands:
- * May be issued by any process.
- * Accepted by own node, or by remote node only if remote management enabled.
- */
-
-#define  TIPC_CMD_NOOP              0x0000    /* tx none, rx none */
-#define  TIPC_CMD_GET_NODES         0x0001    /* tx net_addr, rx node_info(s) */
-#define  TIPC_CMD_GET_MEDIA_NAMES   0x0002    /* tx none, rx media_name(s) */
-#define  TIPC_CMD_GET_BEARER_NAMES  0x0003    /* tx none, rx bearer_name(s) */
-#define  TIPC_CMD_GET_LINKS         0x0004    /* tx net_addr, rx link_info(s) */
-#define  TIPC_CMD_SHOW_NAME_TABLE   0x0005    /* tx name_tbl_query, rx ultra_string */
-#define  TIPC_CMD_SHOW_PORTS        0x0006    /* tx none, rx ultra_string */
-#define  TIPC_CMD_SHOW_LINK_STATS   0x000B    /* tx link_name, rx ultra_string */
-#define  TIPC_CMD_SHOW_STATS        0x000F    /* tx unsigned, rx ultra_string */
-
-/*
- * Protected commands:
- * May only be issued by "network administration capable" process.
- * Accepted by own node, or by remote node only if remote management enabled
- * and this node is zone manager.
- */
-
-#define  TIPC_CMD_GET_REMOTE_MNG    0x4003    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_PORTS     0x4004    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_PUBL      0x4005    /* obsoleted */
-#define  TIPC_CMD_GET_MAX_SUBSCR    0x4006    /* obsoleted */
-#define  TIPC_CMD_GET_MAX_ZONES     0x4007    /* obsoleted */
-#define  TIPC_CMD_GET_MAX_CLUSTERS  0x4008    /* obsoleted */
-#define  TIPC_CMD_GET_MAX_NODES     0x4009    /* obsoleted */
-#define  TIPC_CMD_GET_MAX_SLAVES    0x400A    /* obsoleted */
-#define  TIPC_CMD_GET_NETID         0x400B    /* tx none, rx unsigned */
-
-#define  TIPC_CMD_ENABLE_BEARER     0x4101    /* tx bearer_config, rx none */
-#define  TIPC_CMD_DISABLE_BEARER    0x4102    /* tx bearer_name, rx none */
-#define  TIPC_CMD_SET_LINK_TOL      0x4107    /* tx link_config, rx none */
-#define  TIPC_CMD_SET_LINK_PRI      0x4108    /* tx link_config, rx none */
-#define  TIPC_CMD_SET_LINK_WINDOW   0x4109    /* tx link_config, rx none */
-#define  TIPC_CMD_SET_LOG_SIZE      0x410A    /* obsoleted */
-#define  TIPC_CMD_DUMP_LOG          0x410B    /* obsoleted */
-#define  TIPC_CMD_RESET_LINK_STATS  0x410C    /* tx link_name, rx none */
-
-/*
- * Private commands:
- * May only be issued by "network administration capable" process.
- * Accepted by own node only; cannot be used on a remote node.
- */
-
-#define  TIPC_CMD_SET_NODE_ADDR     0x8001    /* tx net_addr, rx none */
-#define  TIPC_CMD_SET_REMOTE_MNG    0x8003    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_PORTS     0x8004    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_PUBL      0x8005    /* obsoleted */
-#define  TIPC_CMD_SET_MAX_SUBSCR    0x8006    /* obsoleted */
-#define  TIPC_CMD_SET_MAX_ZONES     0x8007    /* obsoleted */
-#define  TIPC_CMD_SET_MAX_CLUSTERS  0x8008    /* obsoleted */
-#define  TIPC_CMD_SET_MAX_NODES     0x8009    /* obsoleted */
-#define  TIPC_CMD_SET_MAX_SLAVES    0x800A    /* obsoleted */
-#define  TIPC_CMD_SET_NETID         0x800B    /* tx unsigned, rx none */
-
-/*
- * Reserved commands:
- * May not be issued by any process.
- * Used internally by TIPC.
- */
-
-#define  TIPC_CMD_NOT_NET_ADMIN     0xC001    /* tx none, rx none */
-
-/*
- * TLV types defined for TIPC
- */
-
-#define TIPC_TLV_NONE		0	/* no TLV present */
-#define TIPC_TLV_VOID		1	/* empty TLV (0 data bytes)*/
-#define TIPC_TLV_UNSIGNED	2	/* 32-bit integer */
-#define TIPC_TLV_STRING		3	/* char[128] (max) */
-#define TIPC_TLV_LARGE_STRING	4	/* char[2048] (max) */
-#define TIPC_TLV_ULTRA_STRING	5	/* char[32768] (max) */
-
-#define TIPC_TLV_ERROR_STRING	16	/* char[128] containing "error code" */
-#define TIPC_TLV_NET_ADDR	17	/* 32-bit integer denoting <Z.C.N> */
-#define TIPC_TLV_MEDIA_NAME	18	/* char[TIPC_MAX_MEDIA_NAME] */
-#define TIPC_TLV_BEARER_NAME	19	/* char[TIPC_MAX_BEARER_NAME] */
-#define TIPC_TLV_LINK_NAME	20	/* char[TIPC_MAX_LINK_NAME] */
-#define TIPC_TLV_NODE_INFO	21	/* struct tipc_node_info */
-#define TIPC_TLV_LINK_INFO	22	/* struct tipc_link_info */
-#define TIPC_TLV_BEARER_CONFIG	23	/* struct tipc_bearer_config */
-#define TIPC_TLV_LINK_CONFIG	24	/* struct tipc_link_config */
-#define TIPC_TLV_NAME_TBL_QUERY	25	/* struct tipc_name_table_query */
-#define TIPC_TLV_PORT_REF	26	/* 32-bit port reference */
-
-/*
- * Maximum sizes of TIPC bearer-related names (including terminating NUL)
- */
-
-#define TIPC_MAX_MEDIA_NAME	16	/* format = media */
-#define TIPC_MAX_IF_NAME	16	/* format = interface */
-#define TIPC_MAX_BEARER_NAME	32	/* format = media:interface */
-#define TIPC_MAX_LINK_NAME	60	/* format = Z.C.N:interface-Z.C.N:interface */
-
-/*
- * Link priority limits (min, default, max, media default)
- */
-
-#define TIPC_MIN_LINK_PRI	0
-#define TIPC_DEF_LINK_PRI	10
-#define TIPC_MAX_LINK_PRI	31
-#define TIPC_MEDIA_LINK_PRI	(TIPC_MAX_LINK_PRI + 1)
-
-/*
- * Link tolerance limits (min, default, max), in ms
- */
-
-#define TIPC_MIN_LINK_TOL 50
-#define TIPC_DEF_LINK_TOL 1500
-#define TIPC_MAX_LINK_TOL 30000
-
-#if (TIPC_MIN_LINK_TOL < 16)
-#error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)"
-#endif
-
-/*
- * Link window limits (min, default, max), in packets
- */
-
-#define TIPC_MIN_LINK_WIN 16
-#define TIPC_DEF_LINK_WIN 50
-#define TIPC_MAX_LINK_WIN 150
-
-
-struct tipc_node_info {
-	__be32 addr;			/* network address of node */
-	__be32 up;			/* 0=down, 1= up */
-};
-
-struct tipc_link_info {
-	__be32 dest;			/* network address of peer node */
-	__be32 up;			/* 0=down, 1=up */
-	char str[TIPC_MAX_LINK_NAME];	/* link name */
-};
-
-struct tipc_bearer_config {
-	__be32 priority;		/* Range [1,31]. Override per link  */
-	__be32 disc_domain;		/* <Z.C.N> describing desired nodes */
-	char name[TIPC_MAX_BEARER_NAME];
-};
-
-struct tipc_link_config {
-	__be32 value;
-	char name[TIPC_MAX_LINK_NAME];
-};
-
-#define TIPC_NTQ_ALLTYPES 0x80000000
-
-struct tipc_name_table_query {
-	__be32 depth;	/* 1:type, 2:+name info, 3:+port info, 4+:+debug info */
-	__be32 type;	/* {t,l,u} info ignored if high bit of "depth" is set */
-	__be32 lowbound; /* (i.e. displays all entries of name table) */
-	__be32 upbound;
-};
-
-/*
- * The error string TLV is a null-terminated string describing the cause
- * of the request failure.  To simplify error processing (and to save space)
- * the first character of the string can be a special error code character
- * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
- */
-
-#define TIPC_CFG_TLV_ERROR      "\x80"  /* request contains incorrect TLV(s) */
-#define TIPC_CFG_NOT_NET_ADMIN  "\x81"	/* must be network administrator */
-#define TIPC_CFG_NOT_ZONE_MSTR	"\x82"	/* must be zone master */
-#define TIPC_CFG_NO_REMOTE	"\x83"	/* remote management not enabled */
-#define TIPC_CFG_NOT_SUPPORTED  "\x84"	/* request is not supported by TIPC */
-#define TIPC_CFG_INVALID_VALUE  "\x85"  /* request has invalid argument value */
-
-/*
- * A TLV consists of a descriptor, followed by the TLV value.
- * TLV descriptor fields are stored in network byte order;
- * TLV values must also be stored in network byte order (where applicable).
- * TLV descriptors must be aligned to addresses which are multiple of 4,
- * so up to 3 bytes of padding may exist at the end of the TLV value area.
- * There must not be any padding between the TLV descriptor and its value.
- */
-
-struct tlv_desc {
-	__be16 tlv_len;		/* TLV length (descriptor + value) */
-	__be16 tlv_type;		/* TLV identifier */
-};
-
-#define TLV_ALIGNTO 4
-
-#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1))
-#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen))
-#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen)))
-#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0)))
-
-static inline int TLV_OK(const void *tlv, __u16 space)
-{
-	/*
-	 * Would also like to check that "tlv" is a multiple of 4,
-	 * but don't know how to do this in a portable way.
-	 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler
-	 *   won't allow binary "&" with a pointer.
-	 * - Tried casting "tlv" to integer type, but causes warning about size
-	 *   mismatch when pointer is bigger than chosen type (int, long, ...).
-	 */
-
-	return (space >= TLV_SPACE(0)) &&
-		(ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space);
-}
-
-static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
-{
-	return TLV_OK(tlv, space) &&
-		(ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
-}
-
-static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
-{
-	struct tlv_desc *tlv_ptr;
-	int tlv_len;
-
-	tlv_len = TLV_LENGTH(len);
-	tlv_ptr = (struct tlv_desc *)tlv;
-	tlv_ptr->tlv_type = htons(type);
-	tlv_ptr->tlv_len  = htons(tlv_len);
-	if (len && data)
-		memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
-	return TLV_SPACE(len);
-}
-
-/*
- * A TLV list descriptor simplifies processing of messages
- * containing multiple TLVs.
- */
-
-struct tlv_list_desc {
-	struct tlv_desc *tlv_ptr;	/* ptr to current TLV */
-	__u32 tlv_space;		/* # bytes from curr TLV to list end */
-};
-
-static inline void TLV_LIST_INIT(struct tlv_list_desc *list,
-				 void *data, __u32 space)
-{
-	list->tlv_ptr = (struct tlv_desc *)data;
-	list->tlv_space = space;
-}
-
-static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list)
-{
-	return (list->tlv_space == 0);
-}
-
-static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type)
-{
-	return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type);
-}
-
-static inline void *TLV_LIST_DATA(struct tlv_list_desc *list)
-{
-	return TLV_DATA(list->tlv_ptr);
-}
-
-static inline void TLV_LIST_STEP(struct tlv_list_desc *list)
-{
-	__u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len));
-
-	list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
-	list->tlv_space -= tlv_space;
-}
-
-/*
- * Configuration messages exchanged via NETLINK_GENERIC use the following
- * family id, name, version and command.
- */
-#define TIPC_GENL_NAME		"TIPC"
-#define TIPC_GENL_VERSION	0x1
-#define TIPC_GENL_CMD		0x1
-
-/*
- * TIPC specific header used in NETLINK_GENERIC requests.
- */
-struct tipc_genlmsghdr {
-	__u32 dest;		/* Destination address */
-	__u16 cmd;		/* Command */
-	__u16 reserved;		/* Unused */
-};
-
-#define TIPC_GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))
-
-/*
- * Configuration messages exchanged via TIPC sockets use the TIPC configuration
- * message header, which is defined below.  This structure is analogous
- * to the Netlink message header, but fields are stored in network byte order
- * and no padding is permitted between the header and the message data
- * that follows.
- */
-
-struct tipc_cfg_msg_hdr {
-	__be32 tcm_len;		/* Message length (including header) */
-	__be16 tcm_type;	/* Command type */
-	__be16 tcm_flags;	/* Additional flags */
-	char  tcm_reserved[8];	/* Unused */
-};
-
-#define TCM_F_REQUEST	0x1	/* Flag: Request message */
-#define TCM_F_MORE	0x2	/* Flag: Message to be continued */
-
-#define TCM_ALIGN(datalen)  (((datalen)+3) & ~3)
-#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen)
-#define TCM_SPACE(datalen)  (TCM_ALIGN(TCM_LENGTH(datalen)))
-#define TCM_DATA(tcm_hdr)   ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0)))
-
-static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags,
-			  void *data, __u16 data_len)
-{
-	struct tipc_cfg_msg_hdr *tcm_hdr;
-	int msg_len;
-
-	msg_len = TCM_LENGTH(data_len);
-	tcm_hdr = (struct tipc_cfg_msg_hdr *)msg;
-	tcm_hdr->tcm_len   = htonl(msg_len);
-	tcm_hdr->tcm_type  = htons(cmd);
-	tcm_hdr->tcm_flags = htons(flags);
-	if (data_len && data)
-		memcpy(TCM_DATA(msg), data, data_len);
-	return TCM_SPACE(data_len);
-}
-
-#endif
diff --git a/include/linux/toshiba.h b/include/linux/toshiba.h
index 772dedbc3a22..915c3bb164ac 100644
--- a/include/linux/toshiba.h
+++ b/include/linux/toshiba.h
@@ -16,25 +16,10 @@
  * General Public License for more details.
  *
  */
-
 #ifndef _LINUX_TOSHIBA_H
 #define _LINUX_TOSHIBA_H
 
-#define TOSH_PROC "/proc/toshiba"
-#define TOSH_DEVICE "/dev/toshiba"
-#define TOSH_SMM _IOWR('t', 0x90, int)	/* broken: meant 24 bytes */
-
-typedef struct {
-	unsigned int eax;
-	unsigned int ebx __attribute__ ((packed));
-	unsigned int ecx __attribute__ ((packed));
-	unsigned int edx __attribute__ ((packed));
-	unsigned int esi __attribute__ ((packed));
-	unsigned int edi __attribute__ ((packed));
-} SMMRegisters;
+#include <uapi/linux/toshiba.h>
 
-#ifdef __KERNEL__
 int tosh_smm(SMMRegisters *regs);
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 4f6c59a5fb79..f0b4eb47297c 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -1,41 +1,6 @@
 #ifndef _LINUX_TTY_H
 #define _LINUX_TTY_H
 
-/*
- * 'tty.h' defines some structures used by tty_io.c and some defines.
- */
-
-#define NR_LDISCS		30
-
-/* line disciplines */
-#define N_TTY		0
-#define N_SLIP		1
-#define N_MOUSE		2
-#define N_PPP		3
-#define N_STRIP		4
-#define N_AX25		5
-#define N_X25		6	/* X.25 async */
-#define N_6PACK		7
-#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964		9	/* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL	10	/* Reserved for Profibus */
-#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data */
-				/* cards about SMS messages */
-#define N_HDLC		13	/* synchronous HDLC */
-#define N_SYNC_PPP	14	/* synchronous PPP */
-#define N_HCI		15	/* Bluetooth HCI UART */
-#define N_GIGASET_M101	16	/* Siemens Gigaset M101 serial DECT adapter */
-#define N_SLCAN		17	/* Serial / USB serial CAN Adaptors */
-#define N_PPS		18	/* Pulse per Second */
-#define N_V253		19	/* Codec control over voice modem */
-#define N_CAIF		20      /* CAIF protocol for talking to modems */
-#define N_GSM0710	21	/* GSM 0710 Mux */
-#define N_TI_WL		22	/* for TI's WL BT, FM, GPS combo chips */
-#define N_TRACESINK	23	/* Trace data routing for MIPI P1149.7 */
-#define N_TRACEROUTER	24	/* Trace data routing for MIPI P1149.7 */
-
-#ifdef __KERNEL__
 #include <linux/fs.h>
 #include <linux/major.h>
 #include <linux/termios.h>
@@ -44,6 +9,7 @@
 #include <linux/tty_ldisc.h>
 #include <linux/mutex.h>
 #include <linux/tty_flags.h>
+#include <uapi/linux/tty.h>
 
 
 
@@ -694,5 +660,4 @@ do {									\
 } while (0)
 
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h
deleted file mode 100644
index eefcb483a2c0..000000000000
--- a/include/linux/tty_flags.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef _LINUX_TTY_FLAGS_H
-#define _LINUX_TTY_FLAGS_H
-
-/*
- * Definitions for async_struct (and serial_struct) flags field also
- * shared by the tty_port flags structures.
- *
- * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
- */
-#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
-				    * on the callout port */
-#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
-#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
-#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
-#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
-#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
-#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
-				    * autoconfiguration */
-#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
-#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
-#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
-#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
-#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
-#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
-#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
-				    * checks.  Note: can be dangerous! */
-#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
-#define ASYNCB_LAST_USER	15
-
-/* Internal flags used only by kernel */
-#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
-#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
-#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
-#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
-#define ASYNCB_CLOSING		27 /* Serial port is closing */
-#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
-#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
-#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
-#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
-#define ASYNCB_FIRST_KERNEL	22
-
-#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
-#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
-#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
-#define ASYNC_SAK		(1U << ASYNCB_SAK)
-#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
-#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
-#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
-#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
-#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
-#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
-#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
-#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
-#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
-#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
-#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
-#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
-#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
-
-#define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_USR_MASK		(ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
-		ASYNC_LOW_LATENCY)
-#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
-#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
-#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-
-#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
-#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
-#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
-#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
-#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
-#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
-#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
-#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
-#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
-
-#endif
diff --git a/include/linux/types.h b/include/linux/types.h
index bf0dd7524b2a..1cc0e4b9a048 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -1,22 +1,13 @@
 #ifndef _LINUX_TYPES_H
 #define _LINUX_TYPES_H
 
-#include <asm/types.h>
+#define __EXPORTED_HEADERS__
+#include <uapi/linux/types.h>
 
 #ifndef __ASSEMBLY__
-#ifdef	__KERNEL__
 
 #define DECLARE_BITMAP(name,bits) \
 	unsigned long name[BITS_TO_LONGS(bits)]
-#else
-#ifndef __EXPORTED_HEADERS__
-#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
-#endif /* __EXPORTED_HEADERS__ */
-#endif
-
-#include <linux/posix_types.h>
-
-#ifdef __KERNEL__
 
 typedef __u32 __kernel_dev_t;
 
@@ -157,48 +148,12 @@ typedef u64 dma_addr_t;
 typedef u32 dma_addr_t;
 #endif /* dma_addr_t */
 
-#endif /* __KERNEL__ */
-
-/*
- * Below are truly Linux-specific types that should never collide with
- * any application/library that wants linux/types.h.
- */
-
 #ifdef __CHECKER__
-#define __bitwise__ __attribute__((bitwise))
 #else
-#define __bitwise__
 #endif
 #ifdef __CHECK_ENDIAN__
-#define __bitwise __bitwise__
 #else
-#define __bitwise
 #endif
-
-typedef __u16 __bitwise __le16;
-typedef __u16 __bitwise __be16;
-typedef __u32 __bitwise __le32;
-typedef __u32 __bitwise __be32;
-typedef __u64 __bitwise __le64;
-typedef __u64 __bitwise __be64;
-
-typedef __u16 __bitwise __sum16;
-typedef __u32 __bitwise __wsum;
-
-/*
- * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
- * common 32/64-bit compat problems.
- * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
- * architectures) and to 8-byte boundaries on 64-bit architectures.  The new
- * aligned_64 type enforces 8-byte alignment so that structs containing
- * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
- * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
- */
-#define __aligned_u64 __u64 __attribute__((aligned(8)))
-#define __aligned_be64 __be64 __attribute__((aligned(8)))
-#define __aligned_le64 __le64 __attribute__((aligned(8)))
-
-#ifdef __KERNEL__
 typedef unsigned __bitwise__ gfp_t;
 typedef unsigned __bitwise__ fmode_t;
 
@@ -256,6 +211,5 @@ struct callback_head {
 };
 #define rcu_head callback_head
 
-#endif	/* __KERNEL__ */
 #endif /*  __ASSEMBLY__ */
 #endif /* _LINUX_TYPES_H */
diff --git a/include/linux/udf_fs_i.h b/include/linux/udf_fs_i.h
deleted file mode 100644
index 3536965913b0..000000000000
--- a/include/linux/udf_fs_i.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * udf_fs_i.h
- *
- * This file is intended for the Linux kernel/module. 
- *
- * COPYRIGHT
- *	This file is distributed under the terms of the GNU General Public
- *	License (GPL). Copies of the GPL can be obtained from:
- *		ftp://prep.ai.mit.edu/pub/gnu/GPL
- *	Each contributing author retains all rights to their own work.
- */
-#ifndef _UDF_FS_I_H
-#define _UDF_FS_I_H 1
-
-/* exported IOCTLs, we have 'l', 0x40-0x7f */
-#define UDF_GETEASIZE   _IOR('l', 0x40, int)
-#define UDF_GETEABLOCK  _IOR('l', 0x41, void *)
-#define UDF_GETVOLIDENT _IOR('l', 0x42, void *)
-#define UDF_RELOCATE_BLOCKS _IOWR('l', 0x43, long)
-
-#endif /* _UDF_FS_I_H */
diff --git a/include/linux/udp.h b/include/linux/udp.h
index 03f72a2ba028..0b67d7793520 100644
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -17,28 +17,10 @@
 #ifndef _LINUX_UDP_H
 #define _LINUX_UDP_H
 
-#include <linux/types.h>
-
-struct udphdr {
-	__be16	source;
-	__be16	dest;
-	__be16	len;
-	__sum16	check;
-};
-
-/* UDP socket options */
-#define UDP_CORK	1	/* Never send partially complete segments */
-#define UDP_ENCAP	100	/* Set the socket to accept encapsulated packets */
-
-/* UDP encapsulation types */
-#define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
-#define UDP_ENCAP_ESPINUDP	2 /* draft-ietf-ipsec-udp-encaps-06 */
-#define UDP_ENCAP_L2TPINUDP	3 /* rfc2661 */
-
-#ifdef __KERNEL__
 #include <net/inet_sock.h>
 #include <linux/skbuff.h>
 #include <net/netns/hash.h>
+#include <uapi/linux/udp.h>
 
 static inline struct udphdr *udp_hdr(const struct sk_buff *skb)
 {
@@ -96,6 +78,4 @@ static inline struct udp_sock *udp_sk(const struct sock *sk)
 
 #define IS_UDPLITE(__sk) (udp_sk(__sk)->pcflag)
 
-#endif
-
 #endif	/* _LINUX_UDP_H */
diff --git a/include/linux/uhid.h b/include/linux/uhid.h
deleted file mode 100644
index 9c6974f16966..000000000000
--- a/include/linux/uhid.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef __UHID_H_
-#define __UHID_H_
-
-/*
- * User-space I/O driver support for HID subsystem
- * Copyright (c) 2012 David Herrmann
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/*
- * Public header for user-space communication. We try to keep every structure
- * aligned but to be safe we also use __attribute__((__packed__)). Therefore,
- * the communication should be ABI compatible even between architectures.
- */
-
-#include <linux/input.h>
-#include <linux/types.h>
-
-enum uhid_event_type {
-	UHID_CREATE,
-	UHID_DESTROY,
-	UHID_START,
-	UHID_STOP,
-	UHID_OPEN,
-	UHID_CLOSE,
-	UHID_OUTPUT,
-	UHID_OUTPUT_EV,
-	UHID_INPUT,
-	UHID_FEATURE,
-	UHID_FEATURE_ANSWER,
-};
-
-struct uhid_create_req {
-	__u8 name[128];
-	__u8 phys[64];
-	__u8 uniq[64];
-	__u8 __user *rd_data;
-	__u16 rd_size;
-
-	__u16 bus;
-	__u32 vendor;
-	__u32 product;
-	__u32 version;
-	__u32 country;
-} __attribute__((__packed__));
-
-#define UHID_DATA_MAX 4096
-
-enum uhid_report_type {
-	UHID_FEATURE_REPORT,
-	UHID_OUTPUT_REPORT,
-	UHID_INPUT_REPORT,
-};
-
-struct uhid_input_req {
-	__u8 data[UHID_DATA_MAX];
-	__u16 size;
-} __attribute__((__packed__));
-
-struct uhid_output_req {
-	__u8 data[UHID_DATA_MAX];
-	__u16 size;
-	__u8 rtype;
-} __attribute__((__packed__));
-
-struct uhid_output_ev_req {
-	__u16 type;
-	__u16 code;
-	__s32 value;
-} __attribute__((__packed__));
-
-struct uhid_feature_req {
-	__u32 id;
-	__u8 rnum;
-	__u8 rtype;
-} __attribute__((__packed__));
-
-struct uhid_feature_answer_req {
-	__u32 id;
-	__u16 err;
-	__u16 size;
-	__u8 data[UHID_DATA_MAX];
-};
-
-struct uhid_event {
-	__u32 type;
-
-	union {
-		struct uhid_create_req create;
-		struct uhid_input_req input;
-		struct uhid_output_req output;
-		struct uhid_output_ev_req output_ev;
-		struct uhid_feature_req feature;
-		struct uhid_feature_answer_req feature_answer;
-	} u;
-} __attribute__((__packed__));
-
-#endif /* __UHID_H_ */
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index c454bbe39ee7..0a4487d3fb1e 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -1,5 +1,3 @@
-#ifndef __UINPUT_H_
-#define __UINPUT_H_
 /*
  *  User level driver support for input subsystem
  *
@@ -31,13 +29,11 @@
  *	0.1	20/06/2002
  *		- first public version
  */
+#ifndef __UINPUT_H_
+#define __UINPUT_H_
 
-#include <linux/types.h>
-#include <linux/input.h>
-
-#define UINPUT_VERSION		3
+#include <uapi/linux/uinput.h>
 
-#ifdef __KERNEL__
 #define UINPUT_NAME		"uinput"
 #define UINPUT_BUFFER_SIZE	16
 #define UINPUT_NUM_REQUESTS	16
@@ -75,103 +71,4 @@ struct uinput_device {
 	wait_queue_head_t	requests_waitq;
 	spinlock_t		requests_lock;
 };
-#endif	/* __KERNEL__ */
-
-struct uinput_ff_upload {
-	__u32			request_id;
-	__s32			retval;
-	struct ff_effect	effect;
-	struct ff_effect	old;
-};
-
-struct uinput_ff_erase {
-	__u32			request_id;
-	__s32			retval;
-	__u32			effect_id;
-};
-
-/* ioctl */
-#define UINPUT_IOCTL_BASE	'U'
-#define UI_DEV_CREATE		_IO(UINPUT_IOCTL_BASE, 1)
-#define UI_DEV_DESTROY		_IO(UINPUT_IOCTL_BASE, 2)
-
-#define UI_SET_EVBIT		_IOW(UINPUT_IOCTL_BASE, 100, int)
-#define UI_SET_KEYBIT		_IOW(UINPUT_IOCTL_BASE, 101, int)
-#define UI_SET_RELBIT		_IOW(UINPUT_IOCTL_BASE, 102, int)
-#define UI_SET_ABSBIT		_IOW(UINPUT_IOCTL_BASE, 103, int)
-#define UI_SET_MSCBIT		_IOW(UINPUT_IOCTL_BASE, 104, int)
-#define UI_SET_LEDBIT		_IOW(UINPUT_IOCTL_BASE, 105, int)
-#define UI_SET_SNDBIT		_IOW(UINPUT_IOCTL_BASE, 106, int)
-#define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
-#define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
-#define UI_SET_SWBIT		_IOW(UINPUT_IOCTL_BASE, 109, int)
-#define UI_SET_PROPBIT		_IOW(UINPUT_IOCTL_BASE, 110, int)
-
-#define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
-#define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
-#define UI_BEGIN_FF_ERASE	_IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
-#define UI_END_FF_ERASE		_IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
-
-/*
- * To write a force-feedback-capable driver, the upload_effect
- * and erase_effect callbacks in input_dev must be implemented.
- * The uinput driver will generate a fake input event when one of
- * these callbacks are invoked. The userspace code then uses
- * ioctls to retrieve additional parameters and send the return code.
- * The callback blocks until this return code is sent.
- *
- * The described callback mechanism is only used if ff_effects_max
- * is set.
- *
- * To implement upload_effect():
- *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
- *      A request ID will be given in 'value'.
- *   2. Allocate a uinput_ff_upload struct, fill in request_id with
- *      the 'value' from the EV_UINPUT event.
- *   3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
- *      uinput_ff_upload struct. It will be filled in with the
- *      ff_effects passed to upload_effect().
- *   4. Perform the effect upload, and place a return code back into
-        the uinput_ff_upload struct.
- *   5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
- *      uinput_ff_upload_effect struct. This will complete execution
- *      of our upload_effect() handler.
- *
- * To implement erase_effect():
- *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
- *      A request ID will be given in 'value'.
- *   2. Allocate a uinput_ff_erase struct, fill in request_id with
- *      the 'value' from the EV_UINPUT event.
- *   3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
- *      uinput_ff_erase struct. It will be filled in with the
- *      effect ID passed to erase_effect().
- *   4. Perform the effect erasure, and place a return code back
- *      into the uinput_ff_erase struct.
- *   5. Issue a UI_END_FF_ERASE ioctl, also giving it the
- *      uinput_ff_erase_effect struct. This will complete execution
- *      of our erase_effect() handler.
- */
-
-/*
- * This is the new event type, used only by uinput.
- * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
- * is the unique request ID. This number was picked
- * arbitrarily, above EV_MAX (since the input system
- * never sees it) but in the range of a 16-bit int.
- */
-#define EV_UINPUT		0x0101
-#define UI_FF_UPLOAD		1
-#define UI_FF_ERASE		2
-
-#define UINPUT_MAX_NAME_SIZE	80
-struct uinput_user_dev {
-	char name[UINPUT_MAX_NAME_SIZE];
-	struct input_id id;
-	__u32 ff_effects_max;
-	__s32 absmax[ABS_CNT];
-	__s32 absmin[ABS_CNT];
-	__s32 absfuzz[ABS_CNT];
-	__s32 absflat[ABS_CNT];
-};
 #endif	/* __UINPUT_H_ */
-
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 98c114323a8b..629aaf51f30b 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -1,9 +1,3 @@
-#ifndef __LINUX_UIO_H
-#define __LINUX_UIO_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
 /*
  *	Berkeley style UIO structures	-	Alan Cox 1994.
  *
@@ -12,21 +6,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
+#ifndef __LINUX_UIO_H
+#define __LINUX_UIO_H
 
-struct iovec
-{
-	void __user *iov_base;	/* BSD uses caddr_t (1003.1g requires void *) */
-	__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
-};
-
-/*
- *	UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
- */
- 
-#define UIO_FASTIOV	8
-#define UIO_MAXIOV	1024
+#include <uapi/linux/uio.h>
 
-#ifdef __KERNEL__
 
 struct kvec {
 	void *iov_base; /* and that should *never* hold a userland pointer */
@@ -52,5 +36,3 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
 
 unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
 #endif
-
-#endif
diff --git a/include/linux/ultrasound.h b/include/linux/ultrasound.h
deleted file mode 100644
index 71339dc531c5..000000000000
--- a/include/linux/ultrasound.h
+++ /dev/null
@@ -1,103 +0,0 @@
-#ifndef _ULTRASOUND_H_
-#define _ULTRASOUND_H_
-/*
- *	ultrasound.h - Macros for programming the Gravis Ultrasound
- *			These macros are extremely device dependent
- *			and not portable.
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-
-
-/*
- *	Private events for Gravis Ultrasound (GUS)
- *
- *	Format:
- *		byte 0 		- SEQ_PRIVATE (0xfe)
- *		byte 1 		- Synthesizer device number (0-N)
- *		byte 2 		- Command (see below)
- *		byte 3 		- Voice number (0-31)
- *		bytes 4 and 5	- parameter P1 (unsigned short)
- *		bytes 6 and 7	- parameter P2 (unsigned short)
- *
- *	Commands:
- *		Each command affects one voice defined in byte 3.
- *		Unused parameters (P1 and/or P2 *MUST* be initialized to zero).
- *		_GUS_NUMVOICES	- Sets max. number of concurrent voices (P1=14-31, default 16)
- *		_GUS_VOICESAMPLE- ************ OBSOLETE *************
- *		_GUS_VOICEON	- Starts voice (P1=voice mode)
- *		_GUS_VOICEOFF	- Stops voice (no parameters)
- *		_GUS_VOICEFADE	- Stops the voice smoothly.
- *		_GUS_VOICEMODE	- Alters the voice mode, don't start or stop voice (P1=voice mode)
- *		_GUS_VOICEBALA	- Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7)
- *		_GUS_VOICEFREQ	- Sets voice (sample) playback frequency (P1=Hz)
- *		_GUS_VOICEVOL	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
- *		_GUS_VOICEVOL2	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
- *				  (Like GUS_VOICEVOL but doesn't change the hw
- *				  volume. It just updates volume in the voice table).
- *
- *		_GUS_RAMPRANGE	- Sets limits for volume ramping (P1=low volume, P2=high volume)
- *		_GUS_RAMPRATE	- Sets the speed for volume ramping (P1=scale, P2=rate)
- *		_GUS_RAMPMODE	- Sets the volume ramping mode (P1=ramping mode)
- *		_GUS_RAMPON	- Starts volume ramping (no parameters)
- *		_GUS_RAMPOFF	- Stops volume ramping (no parameters)
- *		_GUS_VOLUME_SCALE - Changes the volume calculation constants
- *				  for all voices.
- */
-
-#define _GUS_NUMVOICES		0x00
-#define _GUS_VOICESAMPLE	0x01	/* OBSOLETE */
-#define _GUS_VOICEON		0x02
-#define _GUS_VOICEOFF		0x03
-#define _GUS_VOICEMODE		0x04
-#define _GUS_VOICEBALA		0x05
-#define _GUS_VOICEFREQ		0x06
-#define _GUS_VOICEVOL		0x07
-#define _GUS_RAMPRANGE		0x08
-#define _GUS_RAMPRATE		0x09
-#define _GUS_RAMPMODE		0x0a
-#define _GUS_RAMPON		0x0b
-#define _GUS_RAMPOFF		0x0c
-#define _GUS_VOICEFADE		0x0d
-#define _GUS_VOLUME_SCALE	0x0e
-#define _GUS_VOICEVOL2		0x0f
-#define _GUS_VOICE_POS		0x10
-
-/*
- *	GUS API macros
- */
-
-#define _GUS_CMD(chn, voice, cmd, p1, p2) \
-					{_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\
-					_seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\
-					_seqbuf[_seqbufptr+3] = voice;\
-					*(unsigned short*)&_seqbuf[_seqbufptr+4] = p1;\
-					*(unsigned short*)&_seqbuf[_seqbufptr+6] = p2;\
-					_SEQ_ADVBUF(8);}
-
-#define GUS_NUMVOICES(chn, p1)			_GUS_CMD(chn, 0, _GUS_NUMVOICES, (p1), 0)
-#define GUS_VOICESAMPLE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICESAMPLE, (p1), 0)	/* OBSOLETE */
-#define GUS_VOICEON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEON, (p1), 0)
-#define GUS_VOICEOFF(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEOFF, 0, 0)
-#define GUS_VOICEFADE(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEFADE, 0, 0)
-#define GUS_VOICEMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEMODE, (p1), 0)
-#define GUS_VOICEBALA(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEBALA, (p1), 0)
-#define GUS_VOICEFREQ(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICEFREQ, \
-							(p) & 0xffff, ((p) >> 16) & 0xffff)
-#define GUS_VOICEVOL(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL, (p1), 0)
-#define GUS_VOICEVOL2(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL2, (p1), 0)
-#define GUS_RAMPRANGE(chn, voice, low, high)	_GUS_CMD(chn, voice, _GUS_RAMPRANGE, (low), (high))
-#define GUS_RAMPRATE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_RAMPRATE, (p1), (p2))
-#define GUS_RAMPMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPMODE, (p1), 0)
-#define GUS_RAMPON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPON, (p1), 0)
-#define GUS_RAMPOFF(chn, voice)			_GUS_CMD(chn, voice, _GUS_RAMPOFF, 0, 0)
-#define GUS_VOLUME_SCALE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_VOLUME_SCALE, (p1), (p2))
-#define GUS_VOICE_POS(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICE_POS, \
-							(p) & 0xffff, ((p) >> 16) & 0xffff)
-
-#endif
diff --git a/include/linux/un.h b/include/linux/un.h
deleted file mode 100644
index 3ed3e46c1b1f..000000000000
--- a/include/linux/un.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _LINUX_UN_H
-#define _LINUX_UN_H
-
-#include <linux/socket.h>
-
-#define UNIX_PATH_MAX	108
-
-struct sockaddr_un {
-	__kernel_sa_family_t sun_family; /* AF_UNIX */
-	char sun_path[UNIX_PATH_MAX];	/* pathname */
-};
-
-#endif /* _LINUX_UN_H */
diff --git a/include/linux/unistd.h b/include/linux/unistd.h
deleted file mode 100644
index aa8d5b5e2e3e..000000000000
--- a/include/linux/unistd.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _LINUX_UNISTD_H_
-#define _LINUX_UNISTD_H_
-
-/*
- * Include machine specific syscall numbers
- */
-#include <asm/unistd.h>
-
-#endif /* _LINUX_UNISTD_H_ */
diff --git a/include/linux/unix_diag.h b/include/linux/unix_diag.h
deleted file mode 100644
index b1d2bf16b33c..000000000000
--- a/include/linux/unix_diag.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef __UNIX_DIAG_H__
-#define __UNIX_DIAG_H__
-
-#include <linux/types.h>
-
-struct unix_diag_req {
-	__u8	sdiag_family;
-	__u8	sdiag_protocol;
-	__u16	pad;
-	__u32	udiag_states;
-	__u32	udiag_ino;
-	__u32	udiag_show;
-	__u32	udiag_cookie[2];
-};
-
-#define UDIAG_SHOW_NAME		0x00000001	/* show name (not path) */
-#define UDIAG_SHOW_VFS		0x00000002	/* show VFS inode info */
-#define UDIAG_SHOW_PEER		0x00000004	/* show peer socket info */
-#define UDIAG_SHOW_ICONS	0x00000008	/* show pending connections */
-#define UDIAG_SHOW_RQLEN	0x00000010	/* show skb receive queue len */
-#define UDIAG_SHOW_MEMINFO	0x00000020	/* show memory info of a socket */
-
-struct unix_diag_msg {
-	__u8	udiag_family;
-	__u8	udiag_type;
-	__u8	udiag_state;
-	__u8	pad;
-
-	__u32	udiag_ino;
-	__u32	udiag_cookie[2];
-};
-
-enum {
-	UNIX_DIAG_NAME,
-	UNIX_DIAG_VFS,
-	UNIX_DIAG_PEER,
-	UNIX_DIAG_ICONS,
-	UNIX_DIAG_RQLEN,
-	UNIX_DIAG_MEMINFO,
-
-	UNIX_DIAG_MAX,
-};
-
-struct unix_diag_vfs {
-	__u32	udiag_vfs_ino;
-	__u32	udiag_vfs_dev;
-};
-
-struct unix_diag_rqlen {
-	__u32	udiag_rqueue;
-	__u32	udiag_wqueue;
-};
-
-#endif
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 4abe28e41cbc..04a26285416c 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -25,126 +25,11 @@
  */
 
 /*****************************************************************************/
-
 #ifndef _LINUX_USBDEVICE_FS_H
 #define _LINUX_USBDEVICE_FS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/* --------------------------------------------------------------------- */
-
-/* usbdevfs ioctl codes */
-
-struct usbdevfs_ctrltransfer {
-	__u8 bRequestType;
-	__u8 bRequest;
-	__u16 wValue;
-	__u16 wIndex;
-	__u16 wLength;
-	__u32 timeout;  /* in milliseconds */
- 	void __user *data;
-};
-
-struct usbdevfs_bulktransfer {
-	unsigned int ep;
-	unsigned int len;
-	unsigned int timeout; /* in milliseconds */
-	void __user *data;
-};
-
-struct usbdevfs_setinterface {
-	unsigned int interface;
-	unsigned int altsetting;
-};
-
-struct usbdevfs_disconnectsignal {
-	unsigned int signr;
-	void __user *context;
-};
-
-#define USBDEVFS_MAXDRIVERNAME 255
-
-struct usbdevfs_getdriver {
-	unsigned int interface;
-	char driver[USBDEVFS_MAXDRIVERNAME + 1];
-};
-
-struct usbdevfs_connectinfo {
-	unsigned int devnum;
-	unsigned char slow;
-};
-
-#define USBDEVFS_URB_SHORT_NOT_OK	0x01
-#define USBDEVFS_URB_ISO_ASAP		0x02
-#define USBDEVFS_URB_BULK_CONTINUATION	0x04
-#define USBDEVFS_URB_NO_FSBR		0x20
-#define USBDEVFS_URB_ZERO_PACKET	0x40
-#define USBDEVFS_URB_NO_INTERRUPT	0x80
-
-#define USBDEVFS_URB_TYPE_ISO		   0
-#define USBDEVFS_URB_TYPE_INTERRUPT	   1
-#define USBDEVFS_URB_TYPE_CONTROL	   2
-#define USBDEVFS_URB_TYPE_BULK		   3
+#include <uapi/linux/usbdevice_fs.h>
 
-struct usbdevfs_iso_packet_desc {
-	unsigned int length;
-	unsigned int actual_length;
-	unsigned int status;
-};
-
-struct usbdevfs_urb {
-	unsigned char type;
-	unsigned char endpoint;
-	int status;
-	unsigned int flags;
-	void __user *buffer;
-	int buffer_length;
-	int actual_length;
-	int start_frame;
-	int number_of_packets;
-	int error_count;
-	unsigned int signr;	/* signal to be sent on completion,
-				  or 0 if none should be sent. */
-	void __user *usercontext;
-	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
-};
-
-/* ioctls for talking directly to drivers */
-struct usbdevfs_ioctl {
-	int	ifno;		/* interface 0..N ; negative numbers reserved */
-	int	ioctl_code;	/* MUST encode size + direction of data so the
-				 * macros in <asm/ioctl.h> give correct values */
-	void __user *data;	/* param buffer (in, or out) */
-};
-
-/* You can do most things with hubs just through control messages,
- * except find out what device connects to what port. */
-struct usbdevfs_hub_portinfo {
-	char nports;		/* number of downstream ports in this hub */
-	char port [127];	/* e.g. port 3 connects to device 27 */
-};
-
-/* Device capability flags */
-#define USBDEVFS_CAP_ZERO_PACKET		0x01
-#define USBDEVFS_CAP_BULK_CONTINUATION		0x02
-#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM		0x04
-#define USBDEVFS_CAP_BULK_SCATTER_GATHER	0x08
-
-/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
-
-/* disconnect-and-claim if the driver matches the driver field */
-#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER	0x01
-/* disconnect-and-claim except when the driver matches the driver field */
-#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER	0x02
-
-struct usbdevfs_disconnect_claim {
-	unsigned int interface;
-	unsigned int flags;
-	char driver[USBDEVFS_MAXDRIVERNAME + 1];
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
 
@@ -192,38 +77,4 @@ struct usbdevfs_ioctl32 {
 	compat_caddr_t data;
 };
 #endif
-#endif /* __KERNEL__ */
-
-#define USBDEVFS_CONTROL           _IOWR('U', 0, struct usbdevfs_ctrltransfer)
-#define USBDEVFS_CONTROL32           _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
-#define USBDEVFS_BULK              _IOWR('U', 2, struct usbdevfs_bulktransfer)
-#define USBDEVFS_BULK32              _IOWR('U', 2, struct usbdevfs_bulktransfer32)
-#define USBDEVFS_RESETEP           _IOR('U', 3, unsigned int)
-#define USBDEVFS_SETINTERFACE      _IOR('U', 4, struct usbdevfs_setinterface)
-#define USBDEVFS_SETCONFIGURATION  _IOR('U', 5, unsigned int)
-#define USBDEVFS_GETDRIVER         _IOW('U', 8, struct usbdevfs_getdriver)
-#define USBDEVFS_SUBMITURB         _IOR('U', 10, struct usbdevfs_urb)
-#define USBDEVFS_SUBMITURB32       _IOR('U', 10, struct usbdevfs_urb32)
-#define USBDEVFS_DISCARDURB        _IO('U', 11)
-#define USBDEVFS_REAPURB           _IOW('U', 12, void *)
-#define USBDEVFS_REAPURB32         _IOW('U', 12, __u32)
-#define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
-#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, __u32)
-#define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
-#define USBDEVFS_DISCSIGNAL32      _IOR('U', 14, struct usbdevfs_disconnectsignal32)
-#define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
-#define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)
-#define USBDEVFS_CONNECTINFO       _IOW('U', 17, struct usbdevfs_connectinfo)
-#define USBDEVFS_IOCTL             _IOWR('U', 18, struct usbdevfs_ioctl)
-#define USBDEVFS_IOCTL32           _IOWR('U', 18, struct usbdevfs_ioctl32)
-#define USBDEVFS_HUB_PORTINFO      _IOR('U', 19, struct usbdevfs_hub_portinfo)
-#define USBDEVFS_RESET             _IO('U', 20)
-#define USBDEVFS_CLEAR_HALT        _IOR('U', 21, unsigned int)
-#define USBDEVFS_DISCONNECT        _IO('U', 22)
-#define USBDEVFS_CONNECT           _IO('U', 23)
-#define USBDEVFS_CLAIM_PORT        _IOR('U', 24, unsigned int)
-#define USBDEVFS_RELEASE_PORT      _IOR('U', 25, unsigned int)
-#define USBDEVFS_GET_CAPABILITIES  _IOR('U', 26, __u32)
-#define USBDEVFS_DISCONNECT_CLAIM  _IOR('U', 27, struct usbdevfs_disconnect_claim)
-
 #endif /* _LINUX_USBDEVICE_FS_H */
diff --git a/include/linux/utime.h b/include/linux/utime.h
deleted file mode 100644
index 5cdf673afbdb..000000000000
--- a/include/linux/utime.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _LINUX_UTIME_H
-#define _LINUX_UTIME_H
-
-#include <linux/types.h>
-
-struct utimbuf {
-	__kernel_time_t actime;
-	__kernel_time_t modtime;
-};
-
-#endif
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
index c714ed75eae2..2b345206722a 100644
--- a/include/linux/utsname.h
+++ b/include/linux/utsname.h
@@ -1,41 +1,12 @@
 #ifndef _LINUX_UTSNAME_H
 #define _LINUX_UTSNAME_H
 
-#define __OLD_UTS_LEN 8
-
-struct oldold_utsname {
-	char sysname[9];
-	char nodename[9];
-	char release[9];
-	char version[9];
-	char machine[9];
-};
-
-#define __NEW_UTS_LEN 64
-
-struct old_utsname {
-	char sysname[65];
-	char nodename[65];
-	char release[65];
-	char version[65];
-	char machine[65];
-};
-
-struct new_utsname {
-	char sysname[__NEW_UTS_LEN + 1];
-	char nodename[__NEW_UTS_LEN + 1];
-	char release[__NEW_UTS_LEN + 1];
-	char version[__NEW_UTS_LEN + 1];
-	char machine[__NEW_UTS_LEN + 1];
-	char domainname[__NEW_UTS_LEN + 1];
-};
-
-#ifdef __KERNEL__
 
 #include <linux/sched.h>
 #include <linux/kref.h>
 #include <linux/nsproxy.h>
 #include <linux/err.h>
+#include <uapi/linux/utsname.h>
 
 enum uts_proc {
 	UTS_PROC_OSTYPE,
@@ -108,6 +79,4 @@ static inline struct new_utsname *init_utsname(void)
 
 extern struct rw_semaphore uts_sem;
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_UTSNAME_H */
diff --git a/include/linux/uuid.h b/include/linux/uuid.h
index f86c37bfd4a0..6df2509033d7 100644
--- a/include/linux/uuid.h
+++ b/include/linux/uuid.h
@@ -17,44 +17,11 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-
 #ifndef _LINUX_UUID_H_
 #define _LINUX_UUID_H_
 
-#include <linux/types.h>
-#include <linux/string.h>
-
-typedef struct {
-	__u8 b[16];
-} uuid_le;
-
-typedef struct {
-	__u8 b[16];
-} uuid_be;
-
-#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
-((uuid_le)								\
-{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
-   (b) & 0xff, ((b) >> 8) & 0xff,					\
-   (c) & 0xff, ((c) >> 8) & 0xff,					\
-   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+#include <uapi/linux/uuid.h>
 
-#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
-((uuid_be)								\
-{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
-   ((b) >> 8) & 0xff, (b) & 0xff,					\
-   ((c) >> 8) & 0xff, (c) & 0xff,					\
-   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
-
-#define NULL_UUID_LE							\
-	UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
-		0x00, 0x00, 0x00, 0x00)
-
-#define NULL_UUID_BE							\
-	UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
-		0x00, 0x00, 0x00, 0x00)
-
-#ifdef __KERNEL__
 
 static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2)
 {
@@ -69,6 +36,4 @@ static inline int uuid_be_cmp(const uuid_be u1, const uuid_be u2)
 extern void uuid_le_gen(uuid_le *u);
 extern void uuid_be_gen(uuid_be *u);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/uvcvideo.h b/include/linux/uvcvideo.h
deleted file mode 100644
index 3b081862b9e8..000000000000
--- a/include/linux/uvcvideo.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __LINUX_UVCVIDEO_H_
-#define __LINUX_UVCVIDEO_H_
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/*
- * Dynamic controls
- */
-
-/* Data types for UVC control data */
-#define UVC_CTRL_DATA_TYPE_RAW		0
-#define UVC_CTRL_DATA_TYPE_SIGNED	1
-#define UVC_CTRL_DATA_TYPE_UNSIGNED	2
-#define UVC_CTRL_DATA_TYPE_BOOLEAN	3
-#define UVC_CTRL_DATA_TYPE_ENUM		4
-#define UVC_CTRL_DATA_TYPE_BITMASK	5
-
-/* Control flags */
-#define UVC_CTRL_FLAG_SET_CUR		(1 << 0)
-#define UVC_CTRL_FLAG_GET_CUR		(1 << 1)
-#define UVC_CTRL_FLAG_GET_MIN		(1 << 2)
-#define UVC_CTRL_FLAG_GET_MAX		(1 << 3)
-#define UVC_CTRL_FLAG_GET_RES		(1 << 4)
-#define UVC_CTRL_FLAG_GET_DEF		(1 << 5)
-/* Control should be saved at suspend and restored at resume. */
-#define UVC_CTRL_FLAG_RESTORE		(1 << 6)
-/* Control can be updated by the camera. */
-#define UVC_CTRL_FLAG_AUTO_UPDATE	(1 << 7)
-
-#define UVC_CTRL_FLAG_GET_RANGE \
-	(UVC_CTRL_FLAG_GET_CUR | UVC_CTRL_FLAG_GET_MIN | \
-	 UVC_CTRL_FLAG_GET_MAX | UVC_CTRL_FLAG_GET_RES | \
-	 UVC_CTRL_FLAG_GET_DEF)
-
-struct uvc_menu_info {
-	__u32 value;
-	__u8 name[32];
-};
-
-struct uvc_xu_control_mapping {
-	__u32 id;
-	__u8 name[32];
-	__u8 entity[16];
-	__u8 selector;
-
-	__u8 size;
-	__u8 offset;
-	__u32 v4l2_type;
-	__u32 data_type;
-
-	struct uvc_menu_info __user *menu_info;
-	__u32 menu_count;
-
-	__u32 reserved[4];
-};
-
-struct uvc_xu_control_query {
-	__u8 unit;
-	__u8 selector;
-	__u8 query;		/* Video Class-Specific Request Code, */
-				/* defined in linux/usb/video.h A.8.  */
-	__u16 size;
-	__u8 __user *data;
-};
-
-#define UVCIOC_CTRL_MAP		_IOWR('u', 0x20, struct uvc_xu_control_mapping)
-#define UVCIOC_CTRL_QUERY	_IOWR('u', 0x21, struct uvc_xu_control_query)
-
-#endif
diff --git a/include/linux/v4l2-common.h b/include/linux/v4l2-common.h
deleted file mode 100644
index 4f0667e010dd..000000000000
--- a/include/linux/v4l2-common.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * include/linux/v4l2-common.h
- *
- * Common V4L2 and V4L2 subdev definitions.
- *
- * Users are advised to #include this file either through videodev2.h
- * (V4L2) or through v4l2-subdev.h (V4L2 subdev) rather than to refer
- * to this file directly.
- *
- * Copyright (C) 2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __V4L2_COMMON__
-#define __V4L2_COMMON__
-
-/*
- *
- * Selection interface definitions
- *
- */
-
-/* Current cropping area */
-#define V4L2_SEL_TGT_CROP		0x0000
-/* Default cropping area */
-#define V4L2_SEL_TGT_CROP_DEFAULT	0x0001
-/* Cropping bounds */
-#define V4L2_SEL_TGT_CROP_BOUNDS	0x0002
-/* Current composing area */
-#define V4L2_SEL_TGT_COMPOSE		0x0100
-/* Default composing area */
-#define V4L2_SEL_TGT_COMPOSE_DEFAULT	0x0101
-/* Composing bounds */
-#define V4L2_SEL_TGT_COMPOSE_BOUNDS	0x0102
-/* Current composing area plus all padding pixels */
-#define V4L2_SEL_TGT_COMPOSE_PADDED	0x0103
-
-/* Backward compatibility target definitions --- to be removed. */
-#define V4L2_SEL_TGT_CROP_ACTIVE	V4L2_SEL_TGT_CROP
-#define V4L2_SEL_TGT_COMPOSE_ACTIVE	V4L2_SEL_TGT_COMPOSE
-#define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL	V4L2_SEL_TGT_CROP
-#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL V4L2_SEL_TGT_COMPOSE
-#define V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS	V4L2_SEL_TGT_CROP_BOUNDS
-#define V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS V4L2_SEL_TGT_COMPOSE_BOUNDS
-
-/* Selection flags */
-#define V4L2_SEL_FLAG_GE		(1 << 0)
-#define V4L2_SEL_FLAG_LE		(1 << 1)
-#define V4L2_SEL_FLAG_KEEP_CONFIG	(1 << 2)
-
-/* Backward compatibility flag definitions --- to be removed. */
-#define V4L2_SUBDEV_SEL_FLAG_SIZE_GE	V4L2_SEL_FLAG_GE
-#define V4L2_SUBDEV_SEL_FLAG_SIZE_LE	V4L2_SEL_FLAG_LE
-#define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG V4L2_SEL_FLAG_KEEP_CONFIG
-
-#endif /* __V4L2_COMMON__ */
diff --git a/include/linux/v4l2-controls.h b/include/linux/v4l2-controls.h
deleted file mode 100644
index f56c945cecd4..000000000000
--- a/include/linux/v4l2-controls.h
+++ /dev/null
@@ -1,803 +0,0 @@
-/*
- *  Video for Linux Two controls header file
- *
- *  Copyright (C) 1999-2012 the contributors
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  Alternatively you can redistribute this file under the terms of the
- *  BSD license as stated below:
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *  1. Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *  2. Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *  3. The names of its contributors may not be used to endorse or promote
- *     products derived from this software without specific prior written
- *     permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  The contents of this header was split off from videodev2.h. All control
- *  definitions should be added to this header, which is included by
- *  videodev2.h.
- */
-
-#ifndef __LINUX_V4L2_CONTROLS_H
-#define __LINUX_V4L2_CONTROLS_H
-
-/* Control classes */
-#define V4L2_CTRL_CLASS_USER		0x00980000	/* Old-style 'user' controls */
-#define V4L2_CTRL_CLASS_MPEG		0x00990000	/* MPEG-compression controls */
-#define V4L2_CTRL_CLASS_CAMERA		0x009a0000	/* Camera class controls */
-#define V4L2_CTRL_CLASS_FM_TX		0x009b0000	/* FM Modulator control class */
-#define V4L2_CTRL_CLASS_FLASH		0x009c0000	/* Camera flash controls */
-#define V4L2_CTRL_CLASS_JPEG		0x009d0000	/* JPEG-compression controls */
-#define V4L2_CTRL_CLASS_IMAGE_SOURCE	0x009e0000	/* Image source controls */
-#define V4L2_CTRL_CLASS_IMAGE_PROC	0x009f0000	/* Image processing controls */
-#define V4L2_CTRL_CLASS_DV		0x00a00000	/* Digital Video controls */
-
-/* User-class control IDs */
-
-#define V4L2_CID_BASE			(V4L2_CTRL_CLASS_USER | 0x900)
-#define V4L2_CID_USER_BASE 		V4L2_CID_BASE
-#define V4L2_CID_USER_CLASS 		(V4L2_CTRL_CLASS_USER | 1)
-#define V4L2_CID_BRIGHTNESS		(V4L2_CID_BASE+0)
-#define V4L2_CID_CONTRAST		(V4L2_CID_BASE+1)
-#define V4L2_CID_SATURATION		(V4L2_CID_BASE+2)
-#define V4L2_CID_HUE			(V4L2_CID_BASE+3)
-#define V4L2_CID_AUDIO_VOLUME		(V4L2_CID_BASE+5)
-#define V4L2_CID_AUDIO_BALANCE		(V4L2_CID_BASE+6)
-#define V4L2_CID_AUDIO_BASS		(V4L2_CID_BASE+7)
-#define V4L2_CID_AUDIO_TREBLE		(V4L2_CID_BASE+8)
-#define V4L2_CID_AUDIO_MUTE		(V4L2_CID_BASE+9)
-#define V4L2_CID_AUDIO_LOUDNESS		(V4L2_CID_BASE+10)
-#define V4L2_CID_BLACK_LEVEL		(V4L2_CID_BASE+11) /* Deprecated */
-#define V4L2_CID_AUTO_WHITE_BALANCE	(V4L2_CID_BASE+12)
-#define V4L2_CID_DO_WHITE_BALANCE	(V4L2_CID_BASE+13)
-#define V4L2_CID_RED_BALANCE		(V4L2_CID_BASE+14)
-#define V4L2_CID_BLUE_BALANCE		(V4L2_CID_BASE+15)
-#define V4L2_CID_GAMMA			(V4L2_CID_BASE+16)
-#define V4L2_CID_WHITENESS		(V4L2_CID_GAMMA) /* Deprecated */
-#define V4L2_CID_EXPOSURE		(V4L2_CID_BASE+17)
-#define V4L2_CID_AUTOGAIN		(V4L2_CID_BASE+18)
-#define V4L2_CID_GAIN			(V4L2_CID_BASE+19)
-#define V4L2_CID_HFLIP			(V4L2_CID_BASE+20)
-#define V4L2_CID_VFLIP			(V4L2_CID_BASE+21)
-
-/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
-#define V4L2_CID_HCENTER		(V4L2_CID_BASE+22)
-#define V4L2_CID_VCENTER		(V4L2_CID_BASE+23)
-
-#define V4L2_CID_POWER_LINE_FREQUENCY	(V4L2_CID_BASE+24)
-enum v4l2_power_line_frequency {
-	V4L2_CID_POWER_LINE_FREQUENCY_DISABLED	= 0,
-	V4L2_CID_POWER_LINE_FREQUENCY_50HZ	= 1,
-	V4L2_CID_POWER_LINE_FREQUENCY_60HZ	= 2,
-	V4L2_CID_POWER_LINE_FREQUENCY_AUTO	= 3,
-};
-#define V4L2_CID_HUE_AUTO			(V4L2_CID_BASE+25)
-#define V4L2_CID_WHITE_BALANCE_TEMPERATURE	(V4L2_CID_BASE+26)
-#define V4L2_CID_SHARPNESS			(V4L2_CID_BASE+27)
-#define V4L2_CID_BACKLIGHT_COMPENSATION 	(V4L2_CID_BASE+28)
-#define V4L2_CID_CHROMA_AGC                     (V4L2_CID_BASE+29)
-#define V4L2_CID_COLOR_KILLER                   (V4L2_CID_BASE+30)
-#define V4L2_CID_COLORFX			(V4L2_CID_BASE+31)
-enum v4l2_colorfx {
-	V4L2_COLORFX_NONE			= 0,
-	V4L2_COLORFX_BW				= 1,
-	V4L2_COLORFX_SEPIA			= 2,
-	V4L2_COLORFX_NEGATIVE			= 3,
-	V4L2_COLORFX_EMBOSS			= 4,
-	V4L2_COLORFX_SKETCH			= 5,
-	V4L2_COLORFX_SKY_BLUE			= 6,
-	V4L2_COLORFX_GRASS_GREEN		= 7,
-	V4L2_COLORFX_SKIN_WHITEN		= 8,
-	V4L2_COLORFX_VIVID			= 9,
-	V4L2_COLORFX_AQUA			= 10,
-	V4L2_COLORFX_ART_FREEZE			= 11,
-	V4L2_COLORFX_SILHOUETTE			= 12,
-	V4L2_COLORFX_SOLARIZATION		= 13,
-	V4L2_COLORFX_ANTIQUE			= 14,
-	V4L2_COLORFX_SET_CBCR			= 15,
-};
-#define V4L2_CID_AUTOBRIGHTNESS			(V4L2_CID_BASE+32)
-#define V4L2_CID_BAND_STOP_FILTER		(V4L2_CID_BASE+33)
-
-#define V4L2_CID_ROTATE				(V4L2_CID_BASE+34)
-#define V4L2_CID_BG_COLOR			(V4L2_CID_BASE+35)
-
-#define V4L2_CID_CHROMA_GAIN                    (V4L2_CID_BASE+36)
-
-#define V4L2_CID_ILLUMINATORS_1			(V4L2_CID_BASE+37)
-#define V4L2_CID_ILLUMINATORS_2			(V4L2_CID_BASE+38)
-
-#define V4L2_CID_MIN_BUFFERS_FOR_CAPTURE	(V4L2_CID_BASE+39)
-#define V4L2_CID_MIN_BUFFERS_FOR_OUTPUT		(V4L2_CID_BASE+40)
-
-#define V4L2_CID_ALPHA_COMPONENT		(V4L2_CID_BASE+41)
-#define V4L2_CID_COLORFX_CBCR			(V4L2_CID_BASE+42)
-
-/* last CID + 1 */
-#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+43)
-
-
-/* MPEG-class control IDs */
-
-#define V4L2_CID_MPEG_BASE 			(V4L2_CTRL_CLASS_MPEG | 0x900)
-#define V4L2_CID_MPEG_CLASS 			(V4L2_CTRL_CLASS_MPEG | 1)
-
-/*  MPEG streams, specific to multiplexed streams */
-#define V4L2_CID_MPEG_STREAM_TYPE 		(V4L2_CID_MPEG_BASE+0)
-enum v4l2_mpeg_stream_type {
-	V4L2_MPEG_STREAM_TYPE_MPEG2_PS   = 0, /* MPEG-2 program stream */
-	V4L2_MPEG_STREAM_TYPE_MPEG2_TS   = 1, /* MPEG-2 transport stream */
-	V4L2_MPEG_STREAM_TYPE_MPEG1_SS   = 2, /* MPEG-1 system stream */
-	V4L2_MPEG_STREAM_TYPE_MPEG2_DVD  = 3, /* MPEG-2 DVD-compatible stream */
-	V4L2_MPEG_STREAM_TYPE_MPEG1_VCD  = 4, /* MPEG-1 VCD-compatible stream */
-	V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD = 5, /* MPEG-2 SVCD-compatible stream */
-};
-#define V4L2_CID_MPEG_STREAM_PID_PMT 		(V4L2_CID_MPEG_BASE+1)
-#define V4L2_CID_MPEG_STREAM_PID_AUDIO 		(V4L2_CID_MPEG_BASE+2)
-#define V4L2_CID_MPEG_STREAM_PID_VIDEO 		(V4L2_CID_MPEG_BASE+3)
-#define V4L2_CID_MPEG_STREAM_PID_PCR 		(V4L2_CID_MPEG_BASE+4)
-#define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO 	(V4L2_CID_MPEG_BASE+5)
-#define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO 	(V4L2_CID_MPEG_BASE+6)
-#define V4L2_CID_MPEG_STREAM_VBI_FMT 		(V4L2_CID_MPEG_BASE+7)
-enum v4l2_mpeg_stream_vbi_fmt {
-	V4L2_MPEG_STREAM_VBI_FMT_NONE = 0,  /* No VBI in the MPEG stream */
-	V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1,  /* VBI in private packets, IVTV format */
-};
-
-/*  MPEG audio controls specific to multiplexed streams  */
-#define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ 	(V4L2_CID_MPEG_BASE+100)
-enum v4l2_mpeg_audio_sampling_freq {
-	V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0,
-	V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000 = 1,
-	V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000 = 2,
-};
-#define V4L2_CID_MPEG_AUDIO_ENCODING 		(V4L2_CID_MPEG_BASE+101)
-enum v4l2_mpeg_audio_encoding {
-	V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0,
-	V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1,
-	V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2,
-	V4L2_MPEG_AUDIO_ENCODING_AAC     = 3,
-	V4L2_MPEG_AUDIO_ENCODING_AC3     = 4,
-};
-#define V4L2_CID_MPEG_AUDIO_L1_BITRATE 		(V4L2_CID_MPEG_BASE+102)
-enum v4l2_mpeg_audio_l1_bitrate {
-	V4L2_MPEG_AUDIO_L1_BITRATE_32K  = 0,
-	V4L2_MPEG_AUDIO_L1_BITRATE_64K  = 1,
-	V4L2_MPEG_AUDIO_L1_BITRATE_96K  = 2,
-	V4L2_MPEG_AUDIO_L1_BITRATE_128K = 3,
-	V4L2_MPEG_AUDIO_L1_BITRATE_160K = 4,
-	V4L2_MPEG_AUDIO_L1_BITRATE_192K = 5,
-	V4L2_MPEG_AUDIO_L1_BITRATE_224K = 6,
-	V4L2_MPEG_AUDIO_L1_BITRATE_256K = 7,
-	V4L2_MPEG_AUDIO_L1_BITRATE_288K = 8,
-	V4L2_MPEG_AUDIO_L1_BITRATE_320K = 9,
-	V4L2_MPEG_AUDIO_L1_BITRATE_352K = 10,
-	V4L2_MPEG_AUDIO_L1_BITRATE_384K = 11,
-	V4L2_MPEG_AUDIO_L1_BITRATE_416K = 12,
-	V4L2_MPEG_AUDIO_L1_BITRATE_448K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_L2_BITRATE 		(V4L2_CID_MPEG_BASE+103)
-enum v4l2_mpeg_audio_l2_bitrate {
-	V4L2_MPEG_AUDIO_L2_BITRATE_32K  = 0,
-	V4L2_MPEG_AUDIO_L2_BITRATE_48K  = 1,
-	V4L2_MPEG_AUDIO_L2_BITRATE_56K  = 2,
-	V4L2_MPEG_AUDIO_L2_BITRATE_64K  = 3,
-	V4L2_MPEG_AUDIO_L2_BITRATE_80K  = 4,
-	V4L2_MPEG_AUDIO_L2_BITRATE_96K  = 5,
-	V4L2_MPEG_AUDIO_L2_BITRATE_112K = 6,
-	V4L2_MPEG_AUDIO_L2_BITRATE_128K = 7,
-	V4L2_MPEG_AUDIO_L2_BITRATE_160K = 8,
-	V4L2_MPEG_AUDIO_L2_BITRATE_192K = 9,
-	V4L2_MPEG_AUDIO_L2_BITRATE_224K = 10,
-	V4L2_MPEG_AUDIO_L2_BITRATE_256K = 11,
-	V4L2_MPEG_AUDIO_L2_BITRATE_320K = 12,
-	V4L2_MPEG_AUDIO_L2_BITRATE_384K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_L3_BITRATE 		(V4L2_CID_MPEG_BASE+104)
-enum v4l2_mpeg_audio_l3_bitrate {
-	V4L2_MPEG_AUDIO_L3_BITRATE_32K  = 0,
-	V4L2_MPEG_AUDIO_L3_BITRATE_40K  = 1,
-	V4L2_MPEG_AUDIO_L3_BITRATE_48K  = 2,
-	V4L2_MPEG_AUDIO_L3_BITRATE_56K  = 3,
-	V4L2_MPEG_AUDIO_L3_BITRATE_64K  = 4,
-	V4L2_MPEG_AUDIO_L3_BITRATE_80K  = 5,
-	V4L2_MPEG_AUDIO_L3_BITRATE_96K  = 6,
-	V4L2_MPEG_AUDIO_L3_BITRATE_112K = 7,
-	V4L2_MPEG_AUDIO_L3_BITRATE_128K = 8,
-	V4L2_MPEG_AUDIO_L3_BITRATE_160K = 9,
-	V4L2_MPEG_AUDIO_L3_BITRATE_192K = 10,
-	V4L2_MPEG_AUDIO_L3_BITRATE_224K = 11,
-	V4L2_MPEG_AUDIO_L3_BITRATE_256K = 12,
-	V4L2_MPEG_AUDIO_L3_BITRATE_320K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_MODE 		(V4L2_CID_MPEG_BASE+105)
-enum v4l2_mpeg_audio_mode {
-	V4L2_MPEG_AUDIO_MODE_STEREO       = 0,
-	V4L2_MPEG_AUDIO_MODE_JOINT_STEREO = 1,
-	V4L2_MPEG_AUDIO_MODE_DUAL         = 2,
-	V4L2_MPEG_AUDIO_MODE_MONO         = 3,
-};
-#define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION 	(V4L2_CID_MPEG_BASE+106)
-enum v4l2_mpeg_audio_mode_extension {
-	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4  = 0,
-	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8  = 1,
-	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12 = 2,
-	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16 = 3,
-};
-#define V4L2_CID_MPEG_AUDIO_EMPHASIS 		(V4L2_CID_MPEG_BASE+107)
-enum v4l2_mpeg_audio_emphasis {
-	V4L2_MPEG_AUDIO_EMPHASIS_NONE         = 0,
-	V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS = 1,
-	V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17    = 2,
-};
-#define V4L2_CID_MPEG_AUDIO_CRC 		(V4L2_CID_MPEG_BASE+108)
-enum v4l2_mpeg_audio_crc {
-	V4L2_MPEG_AUDIO_CRC_NONE  = 0,
-	V4L2_MPEG_AUDIO_CRC_CRC16 = 1,
-};
-#define V4L2_CID_MPEG_AUDIO_MUTE 		(V4L2_CID_MPEG_BASE+109)
-#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE		(V4L2_CID_MPEG_BASE+110)
-#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE		(V4L2_CID_MPEG_BASE+111)
-enum v4l2_mpeg_audio_ac3_bitrate {
-	V4L2_MPEG_AUDIO_AC3_BITRATE_32K  = 0,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_40K  = 1,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_48K  = 2,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_56K  = 3,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_64K  = 4,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_80K  = 5,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_96K  = 6,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_112K = 7,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_128K = 8,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_160K = 9,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_192K = 10,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_224K = 11,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_256K = 12,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_320K = 13,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_384K = 14,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_448K = 15,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_512K = 16,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18,
-};
-#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK	(V4L2_CID_MPEG_BASE+112)
-enum v4l2_mpeg_audio_dec_playback {
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO	    = 0,
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO	    = 1,
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT	    = 2,
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT	    = 3,
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO	    = 4,
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5,
-};
-#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113)
-
-/*  MPEG video controls specific to multiplexed streams */
-#define V4L2_CID_MPEG_VIDEO_ENCODING 		(V4L2_CID_MPEG_BASE+200)
-enum v4l2_mpeg_video_encoding {
-	V4L2_MPEG_VIDEO_ENCODING_MPEG_1     = 0,
-	V4L2_MPEG_VIDEO_ENCODING_MPEG_2     = 1,
-	V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2,
-};
-#define V4L2_CID_MPEG_VIDEO_ASPECT 		(V4L2_CID_MPEG_BASE+201)
-enum v4l2_mpeg_video_aspect {
-	V4L2_MPEG_VIDEO_ASPECT_1x1     = 0,
-	V4L2_MPEG_VIDEO_ASPECT_4x3     = 1,
-	V4L2_MPEG_VIDEO_ASPECT_16x9    = 2,
-	V4L2_MPEG_VIDEO_ASPECT_221x100 = 3,
-};
-#define V4L2_CID_MPEG_VIDEO_B_FRAMES 		(V4L2_CID_MPEG_BASE+202)
-#define V4L2_CID_MPEG_VIDEO_GOP_SIZE 		(V4L2_CID_MPEG_BASE+203)
-#define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE 	(V4L2_CID_MPEG_BASE+204)
-#define V4L2_CID_MPEG_VIDEO_PULLDOWN 		(V4L2_CID_MPEG_BASE+205)
-#define V4L2_CID_MPEG_VIDEO_BITRATE_MODE 	(V4L2_CID_MPEG_BASE+206)
-enum v4l2_mpeg_video_bitrate_mode {
-	V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0,
-	V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1,
-};
-#define V4L2_CID_MPEG_VIDEO_BITRATE 		(V4L2_CID_MPEG_BASE+207)
-#define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK 	(V4L2_CID_MPEG_BASE+208)
-#define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209)
-#define V4L2_CID_MPEG_VIDEO_MUTE 		(V4L2_CID_MPEG_BASE+210)
-#define V4L2_CID_MPEG_VIDEO_MUTE_YUV 		(V4L2_CID_MPEG_BASE+211)
-#define V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE		(V4L2_CID_MPEG_BASE+212)
-#define V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER	(V4L2_CID_MPEG_BASE+213)
-#define V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB		(V4L2_CID_MPEG_BASE+214)
-#define V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE			(V4L2_CID_MPEG_BASE+215)
-#define V4L2_CID_MPEG_VIDEO_HEADER_MODE				(V4L2_CID_MPEG_BASE+216)
-enum v4l2_mpeg_video_header_mode {
-	V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE			= 0,
-	V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME	= 1,
-
-};
-#define V4L2_CID_MPEG_VIDEO_MAX_REF_PIC			(V4L2_CID_MPEG_BASE+217)
-#define V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE		(V4L2_CID_MPEG_BASE+218)
-#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES	(V4L2_CID_MPEG_BASE+219)
-#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB		(V4L2_CID_MPEG_BASE+220)
-#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE		(V4L2_CID_MPEG_BASE+221)
-enum v4l2_mpeg_video_multi_slice_mode {
-	V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE		= 0,
-	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB		= 1,
-	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES	= 2,
-};
-#define V4L2_CID_MPEG_VIDEO_VBV_SIZE			(V4L2_CID_MPEG_BASE+222)
-#define V4L2_CID_MPEG_VIDEO_DEC_PTS			(V4L2_CID_MPEG_BASE+223)
-#define V4L2_CID_MPEG_VIDEO_DEC_FRAME			(V4L2_CID_MPEG_BASE+224)
-#define V4L2_CID_MPEG_VIDEO_VBV_DELAY			(V4L2_CID_MPEG_BASE+225)
-
-#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP		(V4L2_CID_MPEG_BASE+300)
-#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP		(V4L2_CID_MPEG_BASE+301)
-#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP		(V4L2_CID_MPEG_BASE+302)
-#define V4L2_CID_MPEG_VIDEO_H263_MIN_QP			(V4L2_CID_MPEG_BASE+303)
-#define V4L2_CID_MPEG_VIDEO_H263_MAX_QP			(V4L2_CID_MPEG_BASE+304)
-#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP		(V4L2_CID_MPEG_BASE+350)
-#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP		(V4L2_CID_MPEG_BASE+351)
-#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP		(V4L2_CID_MPEG_BASE+352)
-#define V4L2_CID_MPEG_VIDEO_H264_MIN_QP			(V4L2_CID_MPEG_BASE+353)
-#define V4L2_CID_MPEG_VIDEO_H264_MAX_QP			(V4L2_CID_MPEG_BASE+354)
-#define V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM		(V4L2_CID_MPEG_BASE+355)
-#define V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE		(V4L2_CID_MPEG_BASE+356)
-#define V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE		(V4L2_CID_MPEG_BASE+357)
-enum v4l2_mpeg_video_h264_entropy_mode {
-	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC	= 0,
-	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC	= 1,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_I_PERIOD		(V4L2_CID_MPEG_BASE+358)
-#define V4L2_CID_MPEG_VIDEO_H264_LEVEL			(V4L2_CID_MPEG_BASE+359)
-enum v4l2_mpeg_video_h264_level {
-	V4L2_MPEG_VIDEO_H264_LEVEL_1_0	= 0,
-	V4L2_MPEG_VIDEO_H264_LEVEL_1B	= 1,
-	V4L2_MPEG_VIDEO_H264_LEVEL_1_1	= 2,
-	V4L2_MPEG_VIDEO_H264_LEVEL_1_2	= 3,
-	V4L2_MPEG_VIDEO_H264_LEVEL_1_3	= 4,
-	V4L2_MPEG_VIDEO_H264_LEVEL_2_0	= 5,
-	V4L2_MPEG_VIDEO_H264_LEVEL_2_1	= 6,
-	V4L2_MPEG_VIDEO_H264_LEVEL_2_2	= 7,
-	V4L2_MPEG_VIDEO_H264_LEVEL_3_0	= 8,
-	V4L2_MPEG_VIDEO_H264_LEVEL_3_1	= 9,
-	V4L2_MPEG_VIDEO_H264_LEVEL_3_2	= 10,
-	V4L2_MPEG_VIDEO_H264_LEVEL_4_0	= 11,
-	V4L2_MPEG_VIDEO_H264_LEVEL_4_1	= 12,
-	V4L2_MPEG_VIDEO_H264_LEVEL_4_2	= 13,
-	V4L2_MPEG_VIDEO_H264_LEVEL_5_0	= 14,
-	V4L2_MPEG_VIDEO_H264_LEVEL_5_1	= 15,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA	(V4L2_CID_MPEG_BASE+360)
-#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA	(V4L2_CID_MPEG_BASE+361)
-#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE	(V4L2_CID_MPEG_BASE+362)
-enum v4l2_mpeg_video_h264_loop_filter_mode {
-	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED				= 0,
-	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED				= 1,
-	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY	= 2,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_PROFILE		(V4L2_CID_MPEG_BASE+363)
-enum v4l2_mpeg_video_h264_profile {
-	V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE			= 0,
-	V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE	= 1,
-	V4L2_MPEG_VIDEO_H264_PROFILE_MAIN			= 2,
-	V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED			= 3,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH			= 4,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10			= 5,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422			= 6,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE	= 7,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA		= 8,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA		= 9,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA		= 10,
-	V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA		= 11,
-	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE		= 12,
-	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH		= 13,
-	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA	= 14,
-	V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH		= 15,
-	V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH		= 16,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT	(V4L2_CID_MPEG_BASE+364)
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH	(V4L2_CID_MPEG_BASE+365)
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE		(V4L2_CID_MPEG_BASE+366)
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC		(V4L2_CID_MPEG_BASE+367)
-enum v4l2_mpeg_video_h264_vui_sar_idc {
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED	= 0,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1		= 1,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11		= 2,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11		= 3,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11		= 4,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33		= 5,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11		= 6,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11		= 7,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11		= 8,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33		= 9,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11		= 10,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11		= 11,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33		= 12,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99		= 13,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3		= 14,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2		= 15,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1		= 16,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED	= 17,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING		(V4L2_CID_MPEG_BASE+368)
-#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0		(V4L2_CID_MPEG_BASE+369)
-#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE	(V4L2_CID_MPEG_BASE+370)
-enum v4l2_mpeg_video_h264_sei_fp_arrangement_type {
-	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHECKERBOARD	= 0,
-	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN		= 1,
-	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW		= 2,
-	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE	= 3,
-	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM		= 4,
-	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL		= 5,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_FMO			(V4L2_CID_MPEG_BASE+371)
-#define V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE		(V4L2_CID_MPEG_BASE+372)
-enum v4l2_mpeg_video_h264_fmo_map_type {
-	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES		= 0,
-	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES		= 1,
-	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER	= 2,
-	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT			= 3,
-	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN			= 4,
-	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN			= 5,
-	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT			= 6,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP	(V4L2_CID_MPEG_BASE+373)
-#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION	(V4L2_CID_MPEG_BASE+374)
-enum v4l2_mpeg_video_h264_fmo_change_dir {
-	V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT	= 0,
-	V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT	= 1,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE	(V4L2_CID_MPEG_BASE+375)
-#define V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH		(V4L2_CID_MPEG_BASE+376)
-#define V4L2_CID_MPEG_VIDEO_H264_ASO			(V4L2_CID_MPEG_BASE+377)
-#define V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER	(V4L2_CID_MPEG_BASE+378)
-#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING		(V4L2_CID_MPEG_BASE+379)
-#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE	(V4L2_CID_MPEG_BASE+380)
-enum v4l2_mpeg_video_h264_hierarchical_coding_type {
-	V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B	= 0,
-	V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P	= 1,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER	(V4L2_CID_MPEG_BASE+381)
-#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP	(V4L2_CID_MPEG_BASE+382)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP	(V4L2_CID_MPEG_BASE+400)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP	(V4L2_CID_MPEG_BASE+401)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP	(V4L2_CID_MPEG_BASE+402)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP	(V4L2_CID_MPEG_BASE+403)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP	(V4L2_CID_MPEG_BASE+404)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL		(V4L2_CID_MPEG_BASE+405)
-enum v4l2_mpeg_video_mpeg4_level {
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0	= 0,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B	= 1,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_1	= 2,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_2	= 3,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3	= 4,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B	= 5,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_4	= 6,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_5	= 7,
-};
-#define V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE	(V4L2_CID_MPEG_BASE+406)
-enum v4l2_mpeg_video_mpeg4_profile {
-	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE				= 0,
-	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE			= 1,
-	V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE				= 2,
-	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE			= 3,
-	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY	= 4,
-};
-#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL		(V4L2_CID_MPEG_BASE+407)
-
-/*  MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
-#define V4L2_CID_MPEG_CX2341X_BASE 				(V4L2_CTRL_CLASS_MPEG | 0x1000)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE 	(V4L2_CID_MPEG_CX2341X_BASE+0)
-enum v4l2_mpeg_cx2341x_video_spatial_filter_mode {
-	V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0,
-	V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO   = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER 		(V4L2_CID_MPEG_CX2341X_BASE+1)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE 	(V4L2_CID_MPEG_CX2341X_BASE+2)
-enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type {
-	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF                  = 0,
-	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR               = 1,
-	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT              = 2,
-	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE      = 3,
-	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE = 4,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE 	(V4L2_CID_MPEG_CX2341X_BASE+3)
-enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type {
-	V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF    = 0,
-	V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE 	(V4L2_CID_MPEG_CX2341X_BASE+4)
-enum v4l2_mpeg_cx2341x_video_temporal_filter_mode {
-	V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL = 0,
-	V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO   = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER 		(V4L2_CID_MPEG_CX2341X_BASE+5)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE 		(V4L2_CID_MPEG_CX2341X_BASE+6)
-enum v4l2_mpeg_cx2341x_video_median_filter_type {
-	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF      = 0,
-	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR      = 1,
-	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT     = 2,
-	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT = 3,
-	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG     = 4,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM 	(V4L2_CID_MPEG_CX2341X_BASE+7)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP 	(V4L2_CID_MPEG_CX2341X_BASE+8)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM	(V4L2_CID_MPEG_CX2341X_BASE+9)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP 	(V4L2_CID_MPEG_CX2341X_BASE+10)
-#define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS 	(V4L2_CID_MPEG_CX2341X_BASE+11)
-
-/*  MPEG-class control IDs specific to the Samsung MFC 5.1 driver as defined by V4L2 */
-#define V4L2_CID_MPEG_MFC51_BASE				(V4L2_CTRL_CLASS_MPEG | 0x1100)
-
-#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY		(V4L2_CID_MPEG_MFC51_BASE+0)
-#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE	(V4L2_CID_MPEG_MFC51_BASE+1)
-#define V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE			(V4L2_CID_MPEG_MFC51_BASE+2)
-enum v4l2_mpeg_mfc51_video_frame_skip_mode {
-	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED		= 0,
-	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT	= 1,
-	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT		= 2,
-};
-#define V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE			(V4L2_CID_MPEG_MFC51_BASE+3)
-enum v4l2_mpeg_mfc51_video_force_frame_type {
-	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED		= 0,
-	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME		= 1,
-	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED	= 2,
-};
-#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING				(V4L2_CID_MPEG_MFC51_BASE+4)
-#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV				(V4L2_CID_MPEG_MFC51_BASE+5)
-#define V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT			(V4L2_CID_MPEG_MFC51_BASE+6)
-#define V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF			(V4L2_CID_MPEG_MFC51_BASE+7)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY		(V4L2_CID_MPEG_MFC51_BASE+50)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK			(V4L2_CID_MPEG_MFC51_BASE+51)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH		(V4L2_CID_MPEG_MFC51_BASE+52)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC		(V4L2_CID_MPEG_MFC51_BASE+53)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P		(V4L2_CID_MPEG_MFC51_BASE+54)
-
-
-/*  Camera class control IDs */
-
-#define V4L2_CID_CAMERA_CLASS_BASE 	(V4L2_CTRL_CLASS_CAMERA | 0x900)
-#define V4L2_CID_CAMERA_CLASS 		(V4L2_CTRL_CLASS_CAMERA | 1)
-
-#define V4L2_CID_EXPOSURE_AUTO			(V4L2_CID_CAMERA_CLASS_BASE+1)
-enum  v4l2_exposure_auto_type {
-	V4L2_EXPOSURE_AUTO = 0,
-	V4L2_EXPOSURE_MANUAL = 1,
-	V4L2_EXPOSURE_SHUTTER_PRIORITY = 2,
-	V4L2_EXPOSURE_APERTURE_PRIORITY = 3
-};
-#define V4L2_CID_EXPOSURE_ABSOLUTE		(V4L2_CID_CAMERA_CLASS_BASE+2)
-#define V4L2_CID_EXPOSURE_AUTO_PRIORITY		(V4L2_CID_CAMERA_CLASS_BASE+3)
-
-#define V4L2_CID_PAN_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+4)
-#define V4L2_CID_TILT_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+5)
-#define V4L2_CID_PAN_RESET			(V4L2_CID_CAMERA_CLASS_BASE+6)
-#define V4L2_CID_TILT_RESET			(V4L2_CID_CAMERA_CLASS_BASE+7)
-
-#define V4L2_CID_PAN_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+8)
-#define V4L2_CID_TILT_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+9)
-
-#define V4L2_CID_FOCUS_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+10)
-#define V4L2_CID_FOCUS_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+11)
-#define V4L2_CID_FOCUS_AUTO			(V4L2_CID_CAMERA_CLASS_BASE+12)
-
-#define V4L2_CID_ZOOM_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+13)
-#define V4L2_CID_ZOOM_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+14)
-#define V4L2_CID_ZOOM_CONTINUOUS		(V4L2_CID_CAMERA_CLASS_BASE+15)
-
-#define V4L2_CID_PRIVACY			(V4L2_CID_CAMERA_CLASS_BASE+16)
-
-#define V4L2_CID_IRIS_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+17)
-#define V4L2_CID_IRIS_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+18)
-
-#define V4L2_CID_AUTO_EXPOSURE_BIAS		(V4L2_CID_CAMERA_CLASS_BASE+19)
-
-#define V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE	(V4L2_CID_CAMERA_CLASS_BASE+20)
-enum v4l2_auto_n_preset_white_balance {
-	V4L2_WHITE_BALANCE_MANUAL		= 0,
-	V4L2_WHITE_BALANCE_AUTO			= 1,
-	V4L2_WHITE_BALANCE_INCANDESCENT		= 2,
-	V4L2_WHITE_BALANCE_FLUORESCENT		= 3,
-	V4L2_WHITE_BALANCE_FLUORESCENT_H	= 4,
-	V4L2_WHITE_BALANCE_HORIZON		= 5,
-	V4L2_WHITE_BALANCE_DAYLIGHT		= 6,
-	V4L2_WHITE_BALANCE_FLASH		= 7,
-	V4L2_WHITE_BALANCE_CLOUDY		= 8,
-	V4L2_WHITE_BALANCE_SHADE		= 9,
-};
-
-#define V4L2_CID_WIDE_DYNAMIC_RANGE		(V4L2_CID_CAMERA_CLASS_BASE+21)
-#define V4L2_CID_IMAGE_STABILIZATION		(V4L2_CID_CAMERA_CLASS_BASE+22)
-
-#define V4L2_CID_ISO_SENSITIVITY		(V4L2_CID_CAMERA_CLASS_BASE+23)
-#define V4L2_CID_ISO_SENSITIVITY_AUTO		(V4L2_CID_CAMERA_CLASS_BASE+24)
-enum v4l2_iso_sensitivity_auto_type {
-	V4L2_ISO_SENSITIVITY_MANUAL		= 0,
-	V4L2_ISO_SENSITIVITY_AUTO		= 1,
-};
-
-#define V4L2_CID_EXPOSURE_METERING		(V4L2_CID_CAMERA_CLASS_BASE+25)
-enum v4l2_exposure_metering {
-	V4L2_EXPOSURE_METERING_AVERAGE		= 0,
-	V4L2_EXPOSURE_METERING_CENTER_WEIGHTED	= 1,
-	V4L2_EXPOSURE_METERING_SPOT		= 2,
-};
-
-#define V4L2_CID_SCENE_MODE			(V4L2_CID_CAMERA_CLASS_BASE+26)
-enum v4l2_scene_mode {
-	V4L2_SCENE_MODE_NONE			= 0,
-	V4L2_SCENE_MODE_BACKLIGHT		= 1,
-	V4L2_SCENE_MODE_BEACH_SNOW		= 2,
-	V4L2_SCENE_MODE_CANDLE_LIGHT		= 3,
-	V4L2_SCENE_MODE_DAWN_DUSK		= 4,
-	V4L2_SCENE_MODE_FALL_COLORS		= 5,
-	V4L2_SCENE_MODE_FIREWORKS		= 6,
-	V4L2_SCENE_MODE_LANDSCAPE		= 7,
-	V4L2_SCENE_MODE_NIGHT			= 8,
-	V4L2_SCENE_MODE_PARTY_INDOOR		= 9,
-	V4L2_SCENE_MODE_PORTRAIT		= 10,
-	V4L2_SCENE_MODE_SPORTS			= 11,
-	V4L2_SCENE_MODE_SUNSET			= 12,
-	V4L2_SCENE_MODE_TEXT			= 13,
-};
-
-#define V4L2_CID_3A_LOCK			(V4L2_CID_CAMERA_CLASS_BASE+27)
-#define V4L2_LOCK_EXPOSURE			(1 << 0)
-#define V4L2_LOCK_WHITE_BALANCE			(1 << 1)
-#define V4L2_LOCK_FOCUS				(1 << 2)
-
-#define V4L2_CID_AUTO_FOCUS_START		(V4L2_CID_CAMERA_CLASS_BASE+28)
-#define V4L2_CID_AUTO_FOCUS_STOP		(V4L2_CID_CAMERA_CLASS_BASE+29)
-#define V4L2_CID_AUTO_FOCUS_STATUS		(V4L2_CID_CAMERA_CLASS_BASE+30)
-#define V4L2_AUTO_FOCUS_STATUS_IDLE		(0 << 0)
-#define V4L2_AUTO_FOCUS_STATUS_BUSY		(1 << 0)
-#define V4L2_AUTO_FOCUS_STATUS_REACHED		(1 << 1)
-#define V4L2_AUTO_FOCUS_STATUS_FAILED		(1 << 2)
-
-#define V4L2_CID_AUTO_FOCUS_RANGE		(V4L2_CID_CAMERA_CLASS_BASE+31)
-enum v4l2_auto_focus_range {
-	V4L2_AUTO_FOCUS_RANGE_AUTO		= 0,
-	V4L2_AUTO_FOCUS_RANGE_NORMAL		= 1,
-	V4L2_AUTO_FOCUS_RANGE_MACRO		= 2,
-	V4L2_AUTO_FOCUS_RANGE_INFINITY		= 3,
-};
-
-
-/* FM Modulator class control IDs */
-
-#define V4L2_CID_FM_TX_CLASS_BASE		(V4L2_CTRL_CLASS_FM_TX | 0x900)
-#define V4L2_CID_FM_TX_CLASS			(V4L2_CTRL_CLASS_FM_TX | 1)
-
-#define V4L2_CID_RDS_TX_DEVIATION		(V4L2_CID_FM_TX_CLASS_BASE + 1)
-#define V4L2_CID_RDS_TX_PI			(V4L2_CID_FM_TX_CLASS_BASE + 2)
-#define V4L2_CID_RDS_TX_PTY			(V4L2_CID_FM_TX_CLASS_BASE + 3)
-#define V4L2_CID_RDS_TX_PS_NAME			(V4L2_CID_FM_TX_CLASS_BASE + 5)
-#define V4L2_CID_RDS_TX_RADIO_TEXT		(V4L2_CID_FM_TX_CLASS_BASE + 6)
-
-#define V4L2_CID_AUDIO_LIMITER_ENABLED		(V4L2_CID_FM_TX_CLASS_BASE + 64)
-#define V4L2_CID_AUDIO_LIMITER_RELEASE_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 65)
-#define V4L2_CID_AUDIO_LIMITER_DEVIATION	(V4L2_CID_FM_TX_CLASS_BASE + 66)
-
-#define V4L2_CID_AUDIO_COMPRESSION_ENABLED	(V4L2_CID_FM_TX_CLASS_BASE + 80)
-#define V4L2_CID_AUDIO_COMPRESSION_GAIN		(V4L2_CID_FM_TX_CLASS_BASE + 81)
-#define V4L2_CID_AUDIO_COMPRESSION_THRESHOLD	(V4L2_CID_FM_TX_CLASS_BASE + 82)
-#define V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 83)
-#define V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 84)
-
-#define V4L2_CID_PILOT_TONE_ENABLED		(V4L2_CID_FM_TX_CLASS_BASE + 96)
-#define V4L2_CID_PILOT_TONE_DEVIATION		(V4L2_CID_FM_TX_CLASS_BASE + 97)
-#define V4L2_CID_PILOT_TONE_FREQUENCY		(V4L2_CID_FM_TX_CLASS_BASE + 98)
-
-#define V4L2_CID_TUNE_PREEMPHASIS		(V4L2_CID_FM_TX_CLASS_BASE + 112)
-enum v4l2_preemphasis {
-	V4L2_PREEMPHASIS_DISABLED	= 0,
-	V4L2_PREEMPHASIS_50_uS		= 1,
-	V4L2_PREEMPHASIS_75_uS		= 2,
-};
-#define V4L2_CID_TUNE_POWER_LEVEL		(V4L2_CID_FM_TX_CLASS_BASE + 113)
-#define V4L2_CID_TUNE_ANTENNA_CAPACITOR		(V4L2_CID_FM_TX_CLASS_BASE + 114)
-
-
-/* Flash and privacy (indicator) light controls */
-
-#define V4L2_CID_FLASH_CLASS_BASE		(V4L2_CTRL_CLASS_FLASH | 0x900)
-#define V4L2_CID_FLASH_CLASS			(V4L2_CTRL_CLASS_FLASH | 1)
-
-#define V4L2_CID_FLASH_LED_MODE			(V4L2_CID_FLASH_CLASS_BASE + 1)
-enum v4l2_flash_led_mode {
-	V4L2_FLASH_LED_MODE_NONE,
-	V4L2_FLASH_LED_MODE_FLASH,
-	V4L2_FLASH_LED_MODE_TORCH,
-};
-
-#define V4L2_CID_FLASH_STROBE_SOURCE		(V4L2_CID_FLASH_CLASS_BASE + 2)
-enum v4l2_flash_strobe_source {
-	V4L2_FLASH_STROBE_SOURCE_SOFTWARE,
-	V4L2_FLASH_STROBE_SOURCE_EXTERNAL,
-};
-
-#define V4L2_CID_FLASH_STROBE			(V4L2_CID_FLASH_CLASS_BASE + 3)
-#define V4L2_CID_FLASH_STROBE_STOP		(V4L2_CID_FLASH_CLASS_BASE + 4)
-#define V4L2_CID_FLASH_STROBE_STATUS		(V4L2_CID_FLASH_CLASS_BASE + 5)
-
-#define V4L2_CID_FLASH_TIMEOUT			(V4L2_CID_FLASH_CLASS_BASE + 6)
-#define V4L2_CID_FLASH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 7)
-#define V4L2_CID_FLASH_TORCH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 8)
-#define V4L2_CID_FLASH_INDICATOR_INTENSITY	(V4L2_CID_FLASH_CLASS_BASE + 9)
-
-#define V4L2_CID_FLASH_FAULT			(V4L2_CID_FLASH_CLASS_BASE + 10)
-#define V4L2_FLASH_FAULT_OVER_VOLTAGE		(1 << 0)
-#define V4L2_FLASH_FAULT_TIMEOUT		(1 << 1)
-#define V4L2_FLASH_FAULT_OVER_TEMPERATURE	(1 << 2)
-#define V4L2_FLASH_FAULT_SHORT_CIRCUIT		(1 << 3)
-#define V4L2_FLASH_FAULT_OVER_CURRENT		(1 << 4)
-#define V4L2_FLASH_FAULT_INDICATOR		(1 << 5)
-
-#define V4L2_CID_FLASH_CHARGE			(V4L2_CID_FLASH_CLASS_BASE + 11)
-#define V4L2_CID_FLASH_READY			(V4L2_CID_FLASH_CLASS_BASE + 12)
-
-
-/* JPEG-class control IDs */
-
-#define V4L2_CID_JPEG_CLASS_BASE		(V4L2_CTRL_CLASS_JPEG | 0x900)
-#define V4L2_CID_JPEG_CLASS			(V4L2_CTRL_CLASS_JPEG | 1)
-
-#define	V4L2_CID_JPEG_CHROMA_SUBSAMPLING	(V4L2_CID_JPEG_CLASS_BASE + 1)
-enum v4l2_jpeg_chroma_subsampling {
-	V4L2_JPEG_CHROMA_SUBSAMPLING_444	= 0,
-	V4L2_JPEG_CHROMA_SUBSAMPLING_422	= 1,
-	V4L2_JPEG_CHROMA_SUBSAMPLING_420	= 2,
-	V4L2_JPEG_CHROMA_SUBSAMPLING_411	= 3,
-	V4L2_JPEG_CHROMA_SUBSAMPLING_410	= 4,
-	V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY	= 5,
-};
-#define	V4L2_CID_JPEG_RESTART_INTERVAL		(V4L2_CID_JPEG_CLASS_BASE + 2)
-#define	V4L2_CID_JPEG_COMPRESSION_QUALITY	(V4L2_CID_JPEG_CLASS_BASE + 3)
-
-#define	V4L2_CID_JPEG_ACTIVE_MARKER		(V4L2_CID_JPEG_CLASS_BASE + 4)
-#define	V4L2_JPEG_ACTIVE_MARKER_APP0		(1 << 0)
-#define	V4L2_JPEG_ACTIVE_MARKER_APP1		(1 << 1)
-#define	V4L2_JPEG_ACTIVE_MARKER_COM		(1 << 16)
-#define	V4L2_JPEG_ACTIVE_MARKER_DQT		(1 << 17)
-#define	V4L2_JPEG_ACTIVE_MARKER_DHT		(1 << 18)
-
-/* Image source controls */
-#define V4L2_CID_IMAGE_SOURCE_CLASS_BASE	(V4L2_CTRL_CLASS_IMAGE_SOURCE | 0x900)
-#define V4L2_CID_IMAGE_SOURCE_CLASS		(V4L2_CTRL_CLASS_IMAGE_SOURCE | 1)
-
-#define V4L2_CID_VBLANK				(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 1)
-#define V4L2_CID_HBLANK				(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 2)
-#define V4L2_CID_ANALOGUE_GAIN			(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 3)
-
-
-/* Image processing controls */
-
-#define V4L2_CID_IMAGE_PROC_CLASS_BASE		(V4L2_CTRL_CLASS_IMAGE_PROC | 0x900)
-#define V4L2_CID_IMAGE_PROC_CLASS		(V4L2_CTRL_CLASS_IMAGE_PROC | 1)
-
-#define V4L2_CID_LINK_FREQ			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 1)
-#define V4L2_CID_PIXEL_RATE			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 2)
-#define V4L2_CID_TEST_PATTERN			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 3)
-
-#endif
diff --git a/include/linux/v4l2-dv-timings.h b/include/linux/v4l2-dv-timings.h
deleted file mode 100644
index 9ef8172e5ed0..000000000000
--- a/include/linux/v4l2-dv-timings.h
+++ /dev/null
@@ -1,816 +0,0 @@
-/*
- * V4L2 DV timings header.
- *
- * Copyright (C) 2012  Hans Verkuil <hans.verkuil@cisco.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef _V4L2_DV_TIMINGS_H
-#define _V4L2_DV_TIMINGS_H
-
-#if __GNUC__ < 4 || (__GNUC__ == 4 && (__GNUC_MINOR__ < 6))
-/* Sadly gcc versions older than 4.6 have a bug in how they initialize
-   anonymous unions where they require additional curly brackets.
-   This violates the C1x standard. This workaround adds the curly brackets
-   if needed. */
-#define V4L2_INIT_BT_TIMINGS(_width, args...) \
-	{ .bt = { _width , ## args } }
-#else
-#define V4L2_INIT_BT_TIMINGS(_width, args...) \
-	.bt = { _width , ## args }
-#endif
-
-/* CEA-861-E timings (i.e. standard HDTV timings) */
-
-#define V4L2_DV_BT_CEA_640X480P59_94 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
-		25175000, 16, 96, 48, 10, 2, 33, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_720X480P59_94 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(720, 480, 0, 0, \
-		27000000, 16, 62, 60, 9, 6, 30, 0, 0, 0, \
-		V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_720X576P50 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(720, 576, 0, 0, \
-		27000000, 12, 64, 68, 5, 5, 39, 0, 0, 0, \
-		V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_1280X720P24 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		59400000, 1760, 40, 220, 5, 5, 20, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, \
-		V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-#define V4L2_DV_BT_CEA_1280X720P25 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		74250000, 2420, 40, 220, 5, 5, 20, 0, 0, 0, \
-		V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_1280X720P30 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		74250000, 1760, 40, 220, 5, 5, 20, 0, 0, 0, \
-		V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-#define V4L2_DV_BT_CEA_1280X720P50 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		74250000, 440, 40, 220, 5, 5, 20, 0, 0, 0, \
-		V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_1280X720P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 720, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		74250000, 110, 40, 220, 5, 5, 20, 0, 0, 0, \
-		V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080P24 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		74250000, 638, 44, 148, 4, 5, 36, 0, 0, 0, \
-		V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080P25 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		74250000, 528, 44, 148, 4, 5, 36, 0, 0, 0, \
-		V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080P30 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		74250000, 88, 44, 148, 4, 5, 36, 0, 0, 0, \
-		V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080I50 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1080, 1, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		74250000, 528, 44, 148, 2, 5, 15, 2, 5, 16, \
-		V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_HALF_LINE) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080P50 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		148500000, 528, 44, 148, 4, 5, 36, 0, 0, 0, \
-		V4L2_DV_BT_STD_CEA861, 0) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080I60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1080, 1, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		74250000, 88, 44, 148, 2, 5, 15, 2, 5, 16, \
-		V4L2_DV_BT_STD_CEA861, \
-		V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_HALF_LINE) \
-}
-
-#define V4L2_DV_BT_CEA_1920X1080P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		148500000, 88, 44, 148, 4, 5, 36, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, \
-		V4L2_DV_FL_CAN_REDUCE_FPS) \
-}
-
-
-/* VESA Discrete Monitor Timings as per version 1.0, revision 12 */
-
-#define V4L2_DV_BT_DMT_640X350P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(640, 350, 0, V4L2_DV_HSYNC_POS_POL, \
-		31500000, 32, 64, 96, 32, 3, 60, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_640X400P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(640, 400, 0, V4L2_DV_VSYNC_POS_POL, \
-		31500000, 32, 64, 96, 1, 3, 41, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_720X400P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(720, 400, 0, V4L2_DV_VSYNC_POS_POL, \
-		35500000, 36, 72, 108, 1, 3, 42, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-/* VGA resolutions */
-#define V4L2_DV_BT_DMT_640X480P60 V4L2_DV_BT_CEA_640X480P59_94
-
-#define V4L2_DV_BT_DMT_640X480P72 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
-		31500000, 24, 40, 128, 9, 3, 28, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_640X480P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
-		31500000, 16, 64, 120, 1, 3, 16, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_640X480P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \
-		36000000, 56, 56, 80, 1, 3, 25, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-/* SVGA resolutions */
-#define V4L2_DV_BT_DMT_800X600P56 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(800, 600, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		36000000, 24, 72, 128, 1, 2, 22, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_800X600P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(800, 600, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		40000000, 40, 128, 88, 1, 4, 23, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_800X600P72 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(800, 600, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		50000000, 56, 120, 64, 37, 6, 23, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_800X600P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(800, 600, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		49500000, 16, 80, 160, 1, 3, 21, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_800X600P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(800, 600, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		56250000, 32, 64, 152, 1, 3, 27, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_800X600P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(800, 600, 0, V4L2_DV_HSYNC_POS_POL, \
-		73250000, 48, 32, 80, 3, 4, 29, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_848X480P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(848, 480, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		33750000, 16, 112, 112, 6, 8, 23, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1024X768I43 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1024, 768, 1, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		44900000, 8, 176, 56, 0, 4, 20, 0, 4, 21, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-/* XGA resolutions */
-#define V4L2_DV_BT_DMT_1024X768P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1024, 768, 0, 0, \
-		65000000, 24, 136, 160, 3, 6, 29, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1024X768P70 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1024, 768, 0, 0, \
-		75000000, 24, 136, 144, 3, 6, 29, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1024X768P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1024, 768, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		78750000, 16, 96, 176, 1, 3, 28, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1024X768P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1024, 768, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		94500000, 48, 96, 208, 1, 3, 36, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1024X768P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1024, 768, 0, V4L2_DV_HSYNC_POS_POL, \
-		115500000, 48, 32, 80, 3, 4, 38, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* XGA+ resolution */
-#define V4L2_DV_BT_DMT_1152X864P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1152, 864, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		108000000, 64, 128, 256, 1, 3, 32, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X720P60 V4L2_DV_BT_CEA_1280X720P60
-
-/* WXGA resolutions */
-#define V4L2_DV_BT_DMT_1280X768P60_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_HSYNC_POS_POL, \
-		68250000, 48, 32, 80, 3, 7, 12, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1280X768P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \
-		79500000, 64, 128, 192, 3, 7, 20, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X768P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \
-		102250000, 80, 128, 208, 3, 7, 27, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X768P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \
-		117500000, 80, 136, 216, 3, 7, 31, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X768P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_HSYNC_POS_POL, \
-		140250000, 48, 32, 80, 3, 7, 35, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1280X800P60_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_HSYNC_POS_POL, \
-		71000000, 48, 32, 80, 3, 6, 14, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1280X800P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \
-		83500000, 72, 128, 200, 3, 6, 22, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X800P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \
-		106500000, 80, 128, 208, 3, 6, 29, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X800P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \
-		122500000, 80, 136, 216, 3, 6, 34, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X800P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_HSYNC_POS_POL, \
-		146250000, 48, 32, 80, 3, 6, 38, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1280X960P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 960, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		108000000, 96, 112, 312, 1, 3, 36, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X960P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 960, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		148500000, 64, 160, 224, 1, 3, 47, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X960P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 960, 0, V4L2_DV_HSYNC_POS_POL, \
-		175500000, 48, 32, 80, 3, 4, 50, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* SXGA resolutions */
-#define V4L2_DV_BT_DMT_1280X1024P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		108000000, 48, 112, 248, 1, 3, 38, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X1024P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		135000000, 16, 144, 248, 1, 3, 38, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X1024P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		157500000, 64, 160, 224, 1, 3, 44, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1280X1024P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1280, 1024, 0, V4L2_DV_HSYNC_POS_POL, \
-		187250000, 48, 32, 80, 3, 7, 50, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1360X768P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1360, 768, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		85500000, 64, 112, 256, 3, 6, 18, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1360X768P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1360, 768, 0, V4L2_DV_HSYNC_POS_POL, \
-		148250000, 48, 32, 80, 3, 5, 37, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1366X768P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1366, 768, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		85500000, 70, 143, 213, 3, 3, 24, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1366X768P60_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1366, 768, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		72000000, 14, 56, 64, 1, 3, 28, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* SXGA+ resolutions */
-#define V4L2_DV_BT_DMT_1400X1050P60_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
-		101000000, 48, 32, 80, 3, 4, 23, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1400X1050P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
-		121750000, 88, 144, 232, 3, 4, 32, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1400X1050P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
-		156000000, 104, 144, 248, 3, 4, 42, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1400X1050P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
-		179500000, 104, 152, 256, 3, 4, 48, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1400X1050P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
-		208000000, 48, 32, 80, 3, 4, 55, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* WXGA+ resolutions */
-#define V4L2_DV_BT_DMT_1440X900P60_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_HSYNC_POS_POL, \
-		88750000, 48, 32, 80, 3, 6, 17, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1440X900P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \
-		106500000, 80, 152, 232, 3, 6, 25, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1440X900P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \
-		136750000, 96, 152, 248, 3, 6, 33, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1440X900P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \
-		157000000, 104, 152, 256, 3, 6, 39, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1440X900P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_HSYNC_POS_POL, \
-		182750000, 48, 32, 80, 3, 6, 44, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1600X900P60_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1600, 900, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		108000000, 24, 80, 96, 1, 3, 96, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* UXGA resolutions */
-#define V4L2_DV_BT_DMT_1600X1200P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		162000000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1600X1200P65 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		175500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1600X1200P70 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		189000000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1600X1200P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		202500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1600X1200P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		229500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1600X1200P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1600, 1200, 0, V4L2_DV_HSYNC_POS_POL, \
-		268250000, 48, 32, 80, 3, 4, 64, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* WSXGA+ resolutions */
-#define V4L2_DV_BT_DMT_1680X1050P60_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
-		119000000, 48, 32, 80, 3, 6, 21, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1680X1050P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
-		146250000, 104, 176, 280, 3, 6, 30, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1680X1050P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
-		187000000, 120, 176, 296, 3, 6, 40, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1680X1050P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \
-		214750000, 128, 176, 304, 3, 6, 46, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1680X1050P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_HSYNC_POS_POL, \
-		245500000, 48, 32, 80, 3, 6, 53, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1792X1344P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_VSYNC_POS_POL, \
-		204750000, 128, 200, 328, 1, 3, 46, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1792X1344P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_VSYNC_POS_POL, \
-		261000000, 96, 216, 352, 1, 3, 69, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1792X1344P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_HSYNC_POS_POL, \
-		333250000, 48, 32, 80, 3, 4, 72, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1856X1392P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_VSYNC_POS_POL, \
-		218250000, 96, 224, 352, 1, 3, 43, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1856X1392P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_VSYNC_POS_POL, \
-		288000000, 128, 224, 352, 1, 3, 104, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1856X1392P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_HSYNC_POS_POL, \
-		356500000, 48, 32, 80, 3, 4, 75, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1080P60 V4L2_DV_BT_CEA_1920X1080P60
-
-/* WUXGA resolutions */
-#define V4L2_DV_BT_DMT_1920X1200P60_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_HSYNC_POS_POL, \
-		154000000, 48, 32, 80, 3, 6, 26, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1200P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \
-		193250000, 136, 200, 336, 3, 6, 36, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1200P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \
-		245250000, 136, 208, 344, 3, 6, 46, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1200P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \
-		281250000, 144, 208, 352, 3, 6, 53, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1200P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_HSYNC_POS_POL, \
-		317000000, 48, 32, 80, 3, 6, 62, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1440P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_VSYNC_POS_POL, \
-		234000000, 128, 208, 344, 1, 3, 56, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1440P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_VSYNC_POS_POL, \
-		297000000, 144, 224, 352, 1, 3, 56, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_1920X1440P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_HSYNC_POS_POL, \
-		380500000, 48, 32, 80, 3, 4, 78, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_2048X1152P60_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(2048, 1152, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		162000000, 26, 80, 96, 1, 3, 44, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-/* WQXGA resolutions */
-#define V4L2_DV_BT_DMT_2560X1600P60_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_HSYNC_POS_POL, \
-		268500000, 48, 32, 80, 3, 6, 37, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_2560X1600P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \
-		348500000, 192, 280, 472, 3, 6, 49, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_2560X1600P75 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \
-		443250000, 208, 280, 488, 3, 6, 63, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_2560X1600P85 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \
-		505250000, 208, 280, 488, 3, 6, 73, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \
-}
-
-#define V4L2_DV_BT_DMT_2560X1600P120_RB { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_HSYNC_POS_POL, \
-		552750000, 48, 32, 80, 3, 6, 85, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \
-		V4L2_DV_FL_REDUCED_BLANKING) \
-}
-
-#define V4L2_DV_BT_DMT_1366X768P60 { \
-	.type = V4L2_DV_BT_656_1120, \
-	V4L2_INIT_BT_TIMINGS(1366, 768, 0, \
-		V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
-		85500000, 70, 143, 213, 3, 3, 24, 0, 0, 0, \
-		V4L2_DV_BT_STD_DMT, 0) \
-}
-
-#endif
diff --git a/include/linux/v4l2-mediabus.h b/include/linux/v4l2-mediabus.h
deleted file mode 100644
index 7d64e0e1a18b..000000000000
--- a/include/linux/v4l2-mediabus.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Media Bus API header
- *
- * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_V4L2_MEDIABUS_H
-#define __LINUX_V4L2_MEDIABUS_H
-
-#include <linux/types.h>
-#include <linux/videodev2.h>
-
-/*
- * These pixel codes uniquely identify data formats on the media bus. Mostly
- * they correspond to similarly named V4L2_PIX_FMT_* formats, format 0 is
- * reserved, V4L2_MBUS_FMT_FIXED shall be used by host-client pairs, where the
- * data format is fixed. Additionally, "2X8" means that one pixel is transferred
- * in two 8-bit samples, "BE" or "LE" specify in which order those samples are
- * transferred over the bus: "LE" means that the least significant bits are
- * transferred first, "BE" means that the most significant bits are transferred
- * first, and "PADHI" and "PADLO" define which bits - low or high, in the
- * incomplete high byte, are filled with padding bits.
- *
- * The pixel codes are grouped by type, bus_width, bits per component, samples
- * per pixel and order of subsamples. Numerical values are sorted using generic
- * numerical sort order (8 thus comes before 10).
- *
- * As their value can't change when a new pixel code is inserted in the
- * enumeration, the pixel codes are explicitly given a numerical value. The next
- * free values for each category are listed below, update them when inserting
- * new pixel codes.
- */
-enum v4l2_mbus_pixelcode {
-	V4L2_MBUS_FMT_FIXED = 0x0001,
-
-	/* RGB - next is 0x1009 */
-	V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE = 0x1001,
-	V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE = 0x1002,
-	V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE = 0x1003,
-	V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE = 0x1004,
-	V4L2_MBUS_FMT_BGR565_2X8_BE = 0x1005,
-	V4L2_MBUS_FMT_BGR565_2X8_LE = 0x1006,
-	V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007,
-	V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008,
-
-	/* YUV (including grey) - next is 0x2014 */
-	V4L2_MBUS_FMT_Y8_1X8 = 0x2001,
-	V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002,
-	V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003,
-	V4L2_MBUS_FMT_YUYV8_1_5X8 = 0x2004,
-	V4L2_MBUS_FMT_YVYU8_1_5X8 = 0x2005,
-	V4L2_MBUS_FMT_UYVY8_2X8 = 0x2006,
-	V4L2_MBUS_FMT_VYUY8_2X8 = 0x2007,
-	V4L2_MBUS_FMT_YUYV8_2X8 = 0x2008,
-	V4L2_MBUS_FMT_YVYU8_2X8 = 0x2009,
-	V4L2_MBUS_FMT_Y10_1X10 = 0x200a,
-	V4L2_MBUS_FMT_YUYV10_2X10 = 0x200b,
-	V4L2_MBUS_FMT_YVYU10_2X10 = 0x200c,
-	V4L2_MBUS_FMT_Y12_1X12 = 0x2013,
-	V4L2_MBUS_FMT_UYVY8_1X16 = 0x200f,
-	V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010,
-	V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011,
-	V4L2_MBUS_FMT_YVYU8_1X16 = 0x2012,
-	V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d,
-	V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e,
-
-	/* Bayer - next is 0x3015 */
-	V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001,
-	V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013,
-	V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002,
-	V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014,
-	V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b,
-	V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c,
-	V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009,
-	V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8 = 0x300d,
-	V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE = 0x3003,
-	V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE = 0x3004,
-	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE = 0x3005,
-	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE = 0x3006,
-	V4L2_MBUS_FMT_SBGGR10_1X10 = 0x3007,
-	V4L2_MBUS_FMT_SGBRG10_1X10 = 0x300e,
-	V4L2_MBUS_FMT_SGRBG10_1X10 = 0x300a,
-	V4L2_MBUS_FMT_SRGGB10_1X10 = 0x300f,
-	V4L2_MBUS_FMT_SBGGR12_1X12 = 0x3008,
-	V4L2_MBUS_FMT_SGBRG12_1X12 = 0x3010,
-	V4L2_MBUS_FMT_SGRBG12_1X12 = 0x3011,
-	V4L2_MBUS_FMT_SRGGB12_1X12 = 0x3012,
-
-	/* JPEG compressed formats - next is 0x4002 */
-	V4L2_MBUS_FMT_JPEG_1X8 = 0x4001,
-
-	/* Vendor specific formats - next is 0x5002 */
-
-	/* S5C73M3 sensor specific interleaved UYVY and JPEG */
-	V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 = 0x5001,
-};
-
-/**
- * struct v4l2_mbus_framefmt - frame format on the media bus
- * @width:	frame width
- * @height:	frame height
- * @code:	data format code (from enum v4l2_mbus_pixelcode)
- * @field:	used interlacing type (from enum v4l2_field)
- * @colorspace:	colorspace of the data (from enum v4l2_colorspace)
- */
-struct v4l2_mbus_framefmt {
-	__u32			width;
-	__u32			height;
-	__u32			code;
-	__u32			field;
-	__u32			colorspace;
-	__u32			reserved[7];
-};
-
-#endif
diff --git a/include/linux/v4l2-subdev.h b/include/linux/v4l2-subdev.h
deleted file mode 100644
index a33c4daadce3..000000000000
--- a/include/linux/v4l2-subdev.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * V4L2 subdev userspace API
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *	     Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_V4L2_SUBDEV_H
-#define __LINUX_V4L2_SUBDEV_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/v4l2-common.h>
-#include <linux/v4l2-mediabus.h>
-
-/**
- * enum v4l2_subdev_format_whence - Media bus format type
- * @V4L2_SUBDEV_FORMAT_TRY: try format, for negotiation only
- * @V4L2_SUBDEV_FORMAT_ACTIVE: active format, applied to the device
- */
-enum v4l2_subdev_format_whence {
-	V4L2_SUBDEV_FORMAT_TRY = 0,
-	V4L2_SUBDEV_FORMAT_ACTIVE = 1,
-};
-
-/**
- * struct v4l2_subdev_format - Pad-level media bus format
- * @which: format type (from enum v4l2_subdev_format_whence)
- * @pad: pad number, as reported by the media API
- * @format: media bus format (format code and frame size)
- */
-struct v4l2_subdev_format {
-	__u32 which;
-	__u32 pad;
-	struct v4l2_mbus_framefmt format;
-	__u32 reserved[8];
-};
-
-/**
- * struct v4l2_subdev_crop - Pad-level crop settings
- * @which: format type (from enum v4l2_subdev_format_whence)
- * @pad: pad number, as reported by the media API
- * @rect: pad crop rectangle boundaries
- */
-struct v4l2_subdev_crop {
-	__u32 which;
-	__u32 pad;
-	struct v4l2_rect rect;
-	__u32 reserved[8];
-};
-
-/**
- * struct v4l2_subdev_mbus_code_enum - Media bus format enumeration
- * @pad: pad number, as reported by the media API
- * @index: format index during enumeration
- * @code: format code (from enum v4l2_mbus_pixelcode)
- */
-struct v4l2_subdev_mbus_code_enum {
-	__u32 pad;
-	__u32 index;
-	__u32 code;
-	__u32 reserved[9];
-};
-
-/**
- * struct v4l2_subdev_frame_size_enum - Media bus format enumeration
- * @pad: pad number, as reported by the media API
- * @index: format index during enumeration
- * @code: format code (from enum v4l2_mbus_pixelcode)
- */
-struct v4l2_subdev_frame_size_enum {
-	__u32 index;
-	__u32 pad;
-	__u32 code;
-	__u32 min_width;
-	__u32 max_width;
-	__u32 min_height;
-	__u32 max_height;
-	__u32 reserved[9];
-};
-
-/**
- * struct v4l2_subdev_frame_interval - Pad-level frame rate
- * @pad: pad number, as reported by the media API
- * @interval: frame interval in seconds
- */
-struct v4l2_subdev_frame_interval {
-	__u32 pad;
-	struct v4l2_fract interval;
-	__u32 reserved[9];
-};
-
-/**
- * struct v4l2_subdev_frame_interval_enum - Frame interval enumeration
- * @pad: pad number, as reported by the media API
- * @index: frame interval index during enumeration
- * @code: format code (from enum v4l2_mbus_pixelcode)
- * @width: frame width in pixels
- * @height: frame height in pixels
- * @interval: frame interval in seconds
- */
-struct v4l2_subdev_frame_interval_enum {
-	__u32 index;
-	__u32 pad;
-	__u32 code;
-	__u32 width;
-	__u32 height;
-	struct v4l2_fract interval;
-	__u32 reserved[9];
-};
-
-/**
- * struct v4l2_subdev_selection - selection info
- *
- * @which: either V4L2_SUBDEV_FORMAT_ACTIVE or V4L2_SUBDEV_FORMAT_TRY
- * @pad: pad number, as reported by the media API
- * @target: Selection target, used to choose one of possible rectangles,
- *	    defined in v4l2-common.h; V4L2_SEL_TGT_* .
- * @flags: constraint flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
- * @r: coordinates of the selection window
- * @reserved: for future use, set to zero for now
- *
- * Hardware may use multiple helper windows to process a video stream.
- * The structure is used to exchange this selection areas between
- * an application and a driver.
- */
-struct v4l2_subdev_selection {
-	__u32 which;
-	__u32 pad;
-	__u32 target;
-	__u32 flags;
-	struct v4l2_rect r;
-	__u32 reserved[8];
-};
-
-struct v4l2_subdev_edid {
-	__u32 pad;
-	__u32 start_block;
-	__u32 blocks;
-	__u32 reserved[5];
-	__u8 __user *edid;
-};
-
-#define VIDIOC_SUBDEV_G_FMT	_IOWR('V',  4, struct v4l2_subdev_format)
-#define VIDIOC_SUBDEV_S_FMT	_IOWR('V',  5, struct v4l2_subdev_format)
-#define VIDIOC_SUBDEV_G_FRAME_INTERVAL \
-			_IOWR('V', 21, struct v4l2_subdev_frame_interval)
-#define VIDIOC_SUBDEV_S_FRAME_INTERVAL \
-			_IOWR('V', 22, struct v4l2_subdev_frame_interval)
-#define VIDIOC_SUBDEV_ENUM_MBUS_CODE \
-			_IOWR('V',  2, struct v4l2_subdev_mbus_code_enum)
-#define VIDIOC_SUBDEV_ENUM_FRAME_SIZE \
-			_IOWR('V', 74, struct v4l2_subdev_frame_size_enum)
-#define VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \
-			_IOWR('V', 75, struct v4l2_subdev_frame_interval_enum)
-#define VIDIOC_SUBDEV_G_CROP	_IOWR('V', 59, struct v4l2_subdev_crop)
-#define VIDIOC_SUBDEV_S_CROP	_IOWR('V', 60, struct v4l2_subdev_crop)
-#define VIDIOC_SUBDEV_G_SELECTION \
-	_IOWR('V', 61, struct v4l2_subdev_selection)
-#define VIDIOC_SUBDEV_S_SELECTION \
-	_IOWR('V', 62, struct v4l2_subdev_selection)
-#define VIDIOC_SUBDEV_G_EDID	_IOWR('V', 40, struct v4l2_subdev_edid)
-#define VIDIOC_SUBDEV_S_EDID	_IOWR('V', 41, struct v4l2_subdev_edid)
-
-#endif
diff --git a/include/linux/veth.h b/include/linux/veth.h
deleted file mode 100644
index 3354c1eb424e..000000000000
--- a/include/linux/veth.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __NET_VETH_H_
-#define __NET_VETH_H_
-
-enum {
-	VETH_INFO_UNSPEC,
-	VETH_INFO_PEER,
-
-	__VETH_INFO_MAX
-#define VETH_INFO_MAX	(__VETH_INFO_MAX - 1)
-};
-
-#endif
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index 0a4f180a11d8..ab9e86224c54 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -11,15 +11,10 @@
 #ifndef VFIO_H
 #define VFIO_H
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#define VFIO_API_VERSION	0
-
-#ifdef __KERNEL__	/* Internal VFIO-core/bus driver API */
 
 #include <linux/iommu.h>
 #include <linux/mm.h>
+#include <uapi/linux/vfio.h>
 
 /**
  * struct vfio_device_ops - VFIO bus driver device callbacks
@@ -92,354 +87,4 @@ extern void vfio_unregister_iommu_driver(
 	TYPE tmp;						\
 	offsetof(TYPE, MEMBER) + sizeof(tmp.MEMBER); })		\
 
-#endif /* __KERNEL__ */
-
-/* Kernel & User level defines for VFIO IOCTLs. */
-
-/* Extensions */
-
-#define VFIO_TYPE1_IOMMU		1
-
-/*
- * The IOCTL interface is designed for extensibility by embedding the
- * structure length (argsz) and flags into structures passed between
- * kernel and userspace.  We therefore use the _IO() macro for these
- * defines to avoid implicitly embedding a size into the ioctl request.
- * As structure fields are added, argsz will increase to match and flag
- * bits will be defined to indicate additional fields with valid data.
- * It's *always* the caller's responsibility to indicate the size of
- * the structure passed by setting argsz appropriately.
- */
-
-#define VFIO_TYPE	(';')
-#define VFIO_BASE	100
-
-/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
-
-/**
- * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
- *
- * Report the version of the VFIO API.  This allows us to bump the entire
- * API version should we later need to add or change features in incompatible
- * ways.
- * Return: VFIO_API_VERSION
- * Availability: Always
- */
-#define VFIO_GET_API_VERSION		_IO(VFIO_TYPE, VFIO_BASE + 0)
-
-/**
- * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
- *
- * Check whether an extension is supported.
- * Return: 0 if not supported, 1 (or some other positive integer) if supported.
- * Availability: Always
- */
-#define VFIO_CHECK_EXTENSION		_IO(VFIO_TYPE, VFIO_BASE + 1)
-
-/**
- * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
- *
- * Set the iommu to the given type.  The type must be supported by an
- * iommu driver as verified by calling CHECK_EXTENSION using the same
- * type.  A group must be set to this file descriptor before this
- * ioctl is available.  The IOMMU interfaces enabled by this call are
- * specific to the value set.
- * Return: 0 on success, -errno on failure
- * Availability: When VFIO group attached
- */
-#define VFIO_SET_IOMMU			_IO(VFIO_TYPE, VFIO_BASE + 2)
-
-/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
-
-/**
- * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
- *						struct vfio_group_status)
- *
- * Retrieve information about the group.  Fills in provided
- * struct vfio_group_info.  Caller sets argsz.
- * Return: 0 on succes, -errno on failure.
- * Availability: Always
- */
-struct vfio_group_status {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_GROUP_FLAGS_VIABLE		(1 << 0)
-#define VFIO_GROUP_FLAGS_CONTAINER_SET	(1 << 1)
-};
-#define VFIO_GROUP_GET_STATUS		_IO(VFIO_TYPE, VFIO_BASE + 3)
-
-/**
- * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
- *
- * Set the container for the VFIO group to the open VFIO file
- * descriptor provided.  Groups may only belong to a single
- * container.  Containers may, at their discretion, support multiple
- * groups.  Only when a container is set are all of the interfaces
- * of the VFIO file descriptor and the VFIO group file descriptor
- * available to the user.
- * Return: 0 on success, -errno on failure.
- * Availability: Always
- */
-#define VFIO_GROUP_SET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 4)
-
-/**
- * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
- *
- * Remove the group from the attached container.  This is the
- * opposite of the SET_CONTAINER call and returns the group to
- * an initial state.  All device file descriptors must be released
- * prior to calling this interface.  When removing the last group
- * from a container, the IOMMU will be disabled and all state lost,
- * effectively also returning the VFIO file descriptor to an initial
- * state.
- * Return: 0 on success, -errno on failure.
- * Availability: When attached to container
- */
-#define VFIO_GROUP_UNSET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 5)
-
-/**
- * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
- *
- * Return a new file descriptor for the device object described by
- * the provided string.  The string should match a device listed in
- * the devices subdirectory of the IOMMU group sysfs entry.  The
- * group containing the device must already be added to this context.
- * Return: new file descriptor on success, -errno on failure.
- * Availability: When attached to container
- */
-#define VFIO_GROUP_GET_DEVICE_FD	_IO(VFIO_TYPE, VFIO_BASE + 6)
-
-/* --------------- IOCTLs for DEVICE file descriptors --------------- */
-
-/**
- * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
- *						struct vfio_device_info)
- *
- * Retrieve information about the device.  Fills in provided
- * struct vfio_device_info.  Caller sets argsz.
- * Return: 0 on success, -errno on failure.
- */
-struct vfio_device_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_DEVICE_FLAGS_RESET	(1 << 0)	/* Device supports reset */
-#define VFIO_DEVICE_FLAGS_PCI	(1 << 1)	/* vfio-pci device */
-	__u32	num_regions;	/* Max region index + 1 */
-	__u32	num_irqs;	/* Max IRQ index + 1 */
-};
-#define VFIO_DEVICE_GET_INFO		_IO(VFIO_TYPE, VFIO_BASE + 7)
-
-/**
- * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
- *				       struct vfio_region_info)
- *
- * Retrieve information about a device region.  Caller provides
- * struct vfio_region_info with index value set.  Caller sets argsz.
- * Implementation of region mapping is bus driver specific.  This is
- * intended to describe MMIO, I/O port, as well as bus specific
- * regions (ex. PCI config space).  Zero sized regions may be used
- * to describe unimplemented regions (ex. unimplemented PCI BARs).
- * Return: 0 on success, -errno on failure.
- */
-struct vfio_region_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_REGION_INFO_FLAG_READ	(1 << 0) /* Region supports read */
-#define VFIO_REGION_INFO_FLAG_WRITE	(1 << 1) /* Region supports write */
-#define VFIO_REGION_INFO_FLAG_MMAP	(1 << 2) /* Region supports mmap */
-	__u32	index;		/* Region index */
-	__u32	resv;		/* Reserved for alignment */
-	__u64	size;		/* Region size (bytes) */
-	__u64	offset;		/* Region offset from start of device fd */
-};
-#define VFIO_DEVICE_GET_REGION_INFO	_IO(VFIO_TYPE, VFIO_BASE + 8)
-
-/**
- * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
- *				    struct vfio_irq_info)
- *
- * Retrieve information about a device IRQ.  Caller provides
- * struct vfio_irq_info with index value set.  Caller sets argsz.
- * Implementation of IRQ mapping is bus driver specific.  Indexes
- * using multiple IRQs are primarily intended to support MSI-like
- * interrupt blocks.  Zero count irq blocks may be used to describe
- * unimplemented interrupt types.
- *
- * The EVENTFD flag indicates the interrupt index supports eventfd based
- * signaling.
- *
- * The MASKABLE flags indicates the index supports MASK and UNMASK
- * actions described below.
- *
- * AUTOMASKED indicates that after signaling, the interrupt line is
- * automatically masked by VFIO and the user needs to unmask the line
- * to receive new interrupts.  This is primarily intended to distinguish
- * level triggered interrupts.
- *
- * The NORESIZE flag indicates that the interrupt lines within the index
- * are setup as a set and new subindexes cannot be enabled without first
- * disabling the entire index.  This is used for interrupts like PCI MSI
- * and MSI-X where the driver may only use a subset of the available
- * indexes, but VFIO needs to enable a specific number of vectors
- * upfront.  In the case of MSI-X, where the user can enable MSI-X and
- * then add and unmask vectors, it's up to userspace to make the decision
- * whether to allocate the maximum supported number of vectors or tear
- * down setup and incrementally increase the vectors as each is enabled.
- */
-struct vfio_irq_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_IRQ_INFO_EVENTFD		(1 << 0)
-#define VFIO_IRQ_INFO_MASKABLE		(1 << 1)
-#define VFIO_IRQ_INFO_AUTOMASKED	(1 << 2)
-#define VFIO_IRQ_INFO_NORESIZE		(1 << 3)
-	__u32	index;		/* IRQ index */
-	__u32	count;		/* Number of IRQs within this index */
-};
-#define VFIO_DEVICE_GET_IRQ_INFO	_IO(VFIO_TYPE, VFIO_BASE + 9)
-
-/**
- * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
- *
- * Set signaling, masking, and unmasking of interrupts.  Caller provides
- * struct vfio_irq_set with all fields set.  'start' and 'count' indicate
- * the range of subindexes being specified.
- *
- * The DATA flags specify the type of data provided.  If DATA_NONE, the
- * operation performs the specified action immediately on the specified
- * interrupt(s).  For example, to unmask AUTOMASKED interrupt [0,0]:
- * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
- *
- * DATA_BOOL allows sparse support for the same on arrays of interrupts.
- * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
- * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
- * data = {1,0,1}
- *
- * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
- * A value of -1 can be used to either de-assign interrupts if already
- * assigned or skip un-assigned interrupts.  For example, to set an eventfd
- * to be trigger for interrupts [0,0] and [0,2]:
- * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
- * data = {fd1, -1, fd2}
- * If index [0,1] is previously set, two count = 1 ioctls calls would be
- * required to set [0,0] and [0,2] without changing [0,1].
- *
- * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
- * with ACTION_TRIGGER to perform kernel level interrupt loopback testing
- * from userspace (ie. simulate hardware triggering).
- *
- * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
- * enables the interrupt index for the device.  Individual subindex interrupts
- * can be disabled using the -1 value for DATA_EVENTFD or the index can be
- * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
- *
- * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
- * ACTION_TRIGGER specifies kernel->user signaling.
- */
-struct vfio_irq_set {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_IRQ_SET_DATA_NONE		(1 << 0) /* Data not present */
-#define VFIO_IRQ_SET_DATA_BOOL		(1 << 1) /* Data is bool (u8) */
-#define VFIO_IRQ_SET_DATA_EVENTFD	(1 << 2) /* Data is eventfd (s32) */
-#define VFIO_IRQ_SET_ACTION_MASK	(1 << 3) /* Mask interrupt */
-#define VFIO_IRQ_SET_ACTION_UNMASK	(1 << 4) /* Unmask interrupt */
-#define VFIO_IRQ_SET_ACTION_TRIGGER	(1 << 5) /* Trigger interrupt */
-	__u32	index;
-	__u32	start;
-	__u32	count;
-	__u8	data[];
-};
-#define VFIO_DEVICE_SET_IRQS		_IO(VFIO_TYPE, VFIO_BASE + 10)
-
-#define VFIO_IRQ_SET_DATA_TYPE_MASK	(VFIO_IRQ_SET_DATA_NONE | \
-					 VFIO_IRQ_SET_DATA_BOOL | \
-					 VFIO_IRQ_SET_DATA_EVENTFD)
-#define VFIO_IRQ_SET_ACTION_TYPE_MASK	(VFIO_IRQ_SET_ACTION_MASK | \
-					 VFIO_IRQ_SET_ACTION_UNMASK | \
-					 VFIO_IRQ_SET_ACTION_TRIGGER)
-/**
- * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
- *
- * Reset a device.
- */
-#define VFIO_DEVICE_RESET		_IO(VFIO_TYPE, VFIO_BASE + 11)
-
-/*
- * The VFIO-PCI bus driver makes use of the following fixed region and
- * IRQ index mapping.  Unimplemented regions return a size of zero.
- * Unimplemented IRQ types return a count of zero.
- */
-
-enum {
-	VFIO_PCI_BAR0_REGION_INDEX,
-	VFIO_PCI_BAR1_REGION_INDEX,
-	VFIO_PCI_BAR2_REGION_INDEX,
-	VFIO_PCI_BAR3_REGION_INDEX,
-	VFIO_PCI_BAR4_REGION_INDEX,
-	VFIO_PCI_BAR5_REGION_INDEX,
-	VFIO_PCI_ROM_REGION_INDEX,
-	VFIO_PCI_CONFIG_REGION_INDEX,
-	VFIO_PCI_NUM_REGIONS
-};
-
-enum {
-	VFIO_PCI_INTX_IRQ_INDEX,
-	VFIO_PCI_MSI_IRQ_INDEX,
-	VFIO_PCI_MSIX_IRQ_INDEX,
-	VFIO_PCI_NUM_IRQS
-};
-
-/* -------- API for Type1 VFIO IOMMU -------- */
-
-/**
- * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
- *
- * Retrieve information about the IOMMU object. Fills in provided
- * struct vfio_iommu_info. Caller sets argsz.
- *
- * XXX Should we do these by CHECK_EXTENSION too?
- */
-struct vfio_iommu_type1_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_IOMMU_INFO_PGSIZES (1 << 0)	/* supported page sizes info */
-	__u64	iova_pgsizes;		/* Bitmap of supported page sizes */
-};
-
-#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
-
-/**
- * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
- *
- * Map process virtual addresses to IO virtual addresses using the
- * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
- */
-struct vfio_iommu_type1_dma_map {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_DMA_MAP_FLAG_READ (1 << 0)		/* readable from device */
-#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1)	/* writable from device */
-	__u64	vaddr;				/* Process virtual address */
-	__u64	iova;				/* IO virtual address */
-	__u64	size;				/* Size of mapping (bytes) */
-};
-
-#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
-
-/**
- * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap)
- *
- * Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
- * Caller sets argsz.
- */
-struct vfio_iommu_type1_dma_unmap {
-	__u32	argsz;
-	__u32	flags;
-	__u64	iova;				/* IO virtual address */
-	__u64	size;				/* Size of mapping (bytes) */
-};
-
-#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
-
 #endif /* VFIO_H */
diff --git a/include/linux/vhost.h b/include/linux/vhost.h
deleted file mode 100644
index e847f1e30756..000000000000
--- a/include/linux/vhost.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef _LINUX_VHOST_H
-#define _LINUX_VHOST_H
-/* Userspace interface for in-kernel virtio accelerators. */
-
-/* vhost is used to reduce the number of system calls involved in virtio.
- *
- * Existing virtio net code is used in the guest without modification.
- *
- * This header includes interface used by userspace hypervisor for
- * device configuration.
- */
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/virtio_config.h>
-#include <linux/virtio_ring.h>
-
-struct vhost_vring_state {
-	unsigned int index;
-	unsigned int num;
-};
-
-struct vhost_vring_file {
-	unsigned int index;
-	int fd; /* Pass -1 to unbind from file. */
-
-};
-
-struct vhost_vring_addr {
-	unsigned int index;
-	/* Option flags. */
-	unsigned int flags;
-	/* Flag values: */
-	/* Whether log address is valid. If set enables logging. */
-#define VHOST_VRING_F_LOG 0
-
-	/* Start of array of descriptors (virtually contiguous) */
-	__u64 desc_user_addr;
-	/* Used structure address. Must be 32 bit aligned */
-	__u64 used_user_addr;
-	/* Available structure address. Must be 16 bit aligned */
-	__u64 avail_user_addr;
-	/* Logging support. */
-	/* Log writes to used structure, at offset calculated from specified
-	 * address. Address must be 32 bit aligned. */
-	__u64 log_guest_addr;
-};
-
-struct vhost_memory_region {
-	__u64 guest_phys_addr;
-	__u64 memory_size; /* bytes */
-	__u64 userspace_addr;
-	__u64 flags_padding; /* No flags are currently specified. */
-};
-
-/* All region addresses and sizes must be 4K aligned. */
-#define VHOST_PAGE_SIZE 0x1000
-
-struct vhost_memory {
-	__u32 nregions;
-	__u32 padding;
-	struct vhost_memory_region regions[0];
-};
-
-/* ioctls */
-
-#define VHOST_VIRTIO 0xAF
-
-/* Features bitmask for forward compatibility.  Transport bits are used for
- * vhost specific features. */
-#define VHOST_GET_FEATURES	_IOR(VHOST_VIRTIO, 0x00, __u64)
-#define VHOST_SET_FEATURES	_IOW(VHOST_VIRTIO, 0x00, __u64)
-
-/* Set current process as the (exclusive) owner of this file descriptor.  This
- * must be called before any other vhost command.  Further calls to
- * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
-#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
-/* Give up ownership, and reset the device to default values.
- * Allows subsequent call to VHOST_OWNER_SET to succeed. */
-#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
-
-/* Set up/modify memory layout */
-#define VHOST_SET_MEM_TABLE	_IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
-
-/* Write logging setup. */
-/* Memory writes can optionally be logged by setting bit at an offset
- * (calculated from the physical address) from specified log base.
- * The bit is set using an atomic 32 bit operation. */
-/* Set base address for logging. */
-#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
-/* Specify an eventfd file descriptor to signal on log write. */
-#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
-
-/* Ring setup. */
-/* Set number of descriptors in ring. This parameter can not
- * be modified while ring is running (bound to a device). */
-#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
-/* Set addresses for the ring. */
-#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
-/* Base value where queue looks for available descriptors */
-#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
-/* Get accessor: reads index, writes value in num */
-#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
-
-/* The following ioctls use eventfd file descriptors to signal and poll
- * for events. */
-
-/* Set eventfd to poll for added buffers */
-#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
-/* Set eventfd to signal when buffers have beed used */
-#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
-/* Set eventfd to signal an error */
-#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
-
-/* VHOST_NET specific defines */
-
-/* Attach virtio net ring to a raw socket, or tap device.
- * The socket must be already bound to an ethernet device, this device will be
- * used for transmit.  Pass fd -1 to unbind from the socket and the transmit
- * device.  This can be used to stop the ring (e.g. for migration). */
-#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
-
-/* Feature bits */
-/* Log all write descriptors. Can be changed while device is active. */
-#define VHOST_F_LOG_ALL 26
-/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
-#define VHOST_NET_F_VIRTIO_NET_HDR 27
-
-#endif
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 873adbe82988..73ea2fb04731 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -56,1945 +56,7 @@
 #ifndef __LINUX_VIDEODEV2_H
 #define __LINUX_VIDEODEV2_H
 
-#ifdef __KERNEL__
 #include <linux/time.h>     /* need struct timeval */
-#else
-#include <sys/time.h>
-#endif
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/v4l2-common.h>
-#include <linux/v4l2-controls.h>
-
-/*
- * Common stuff for both V4L1 and V4L2
- * Moved from videodev.h
- */
-#define VIDEO_MAX_FRAME               32
-#define VIDEO_MAX_PLANES               8
-
-#ifndef __KERNEL__
-
-/* These defines are V4L1 specific and should not be used with the V4L2 API!
-   They will be removed from this header in the future. */
-
-#define VID_TYPE_CAPTURE	1	/* Can capture */
-#define VID_TYPE_TUNER		2	/* Can tune */
-#define VID_TYPE_TELETEXT	4	/* Does teletext */
-#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
-#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
-#define VID_TYPE_CLIPPING	32	/* Can clip */
-#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
-#define VID_TYPE_SCALES		128	/* Scalable */
-#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
-#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
-#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
-#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
-#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
-#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
-#endif
-
-/*
- *	M I S C E L L A N E O U S
- */
-
-/*  Four-character-code (FOURCC) */
-#define v4l2_fourcc(a, b, c, d)\
-	((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
-
-/*
- *	E N U M S
- */
-enum v4l2_field {
-	V4L2_FIELD_ANY           = 0, /* driver can choose from none,
-					 top, bottom, interlaced
-					 depending on whatever it thinks
-					 is approximate ... */
-	V4L2_FIELD_NONE          = 1, /* this device has no fields ... */
-	V4L2_FIELD_TOP           = 2, /* top field only */
-	V4L2_FIELD_BOTTOM        = 3, /* bottom field only */
-	V4L2_FIELD_INTERLACED    = 4, /* both fields interlaced */
-	V4L2_FIELD_SEQ_TB        = 5, /* both fields sequential into one
-					 buffer, top-bottom order */
-	V4L2_FIELD_SEQ_BT        = 6, /* same as above + bottom-top order */
-	V4L2_FIELD_ALTERNATE     = 7, /* both fields alternating into
-					 separate buffers */
-	V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
-					 first and the top field is
-					 transmitted first */
-	V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
-					 first and the bottom field is
-					 transmitted first */
-};
-#define V4L2_FIELD_HAS_TOP(field)	\
-	((field) == V4L2_FIELD_TOP 	||\
-	 (field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB	||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTTOM(field)	\
-	((field) == V4L2_FIELD_BOTTOM 	||\
-	 (field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB	||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTH(field)	\
-	((field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB ||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-
-enum v4l2_buf_type {
-	V4L2_BUF_TYPE_VIDEO_CAPTURE        = 1,
-	V4L2_BUF_TYPE_VIDEO_OUTPUT         = 2,
-	V4L2_BUF_TYPE_VIDEO_OVERLAY        = 3,
-	V4L2_BUF_TYPE_VBI_CAPTURE          = 4,
-	V4L2_BUF_TYPE_VBI_OUTPUT           = 5,
-	V4L2_BUF_TYPE_SLICED_VBI_CAPTURE   = 6,
-	V4L2_BUF_TYPE_SLICED_VBI_OUTPUT    = 7,
-#if 1
-	/* Experimental */
-	V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
-#endif
-	V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
-	V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE  = 10,
-	/* Deprecated, do not use */
-	V4L2_BUF_TYPE_PRIVATE              = 0x80,
-};
-
-#define V4L2_TYPE_IS_MULTIPLANAR(type)			\
-	((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE	\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
-
-#define V4L2_TYPE_IS_OUTPUT(type)				\
-	((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT			\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE		\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY		\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY	\
-	 || (type) == V4L2_BUF_TYPE_VBI_OUTPUT			\
-	 || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
-
-enum v4l2_tuner_type {
-	V4L2_TUNER_RADIO	     = 1,
-	V4L2_TUNER_ANALOG_TV	     = 2,
-	V4L2_TUNER_DIGITAL_TV	     = 3,
-};
-
-enum v4l2_memory {
-	V4L2_MEMORY_MMAP             = 1,
-	V4L2_MEMORY_USERPTR          = 2,
-	V4L2_MEMORY_OVERLAY          = 3,
-};
-
-/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
-enum v4l2_colorspace {
-	/* ITU-R 601 -- broadcast NTSC/PAL */
-	V4L2_COLORSPACE_SMPTE170M     = 1,
-
-	/* 1125-Line (US) HDTV */
-	V4L2_COLORSPACE_SMPTE240M     = 2,
-
-	/* HD and modern captures. */
-	V4L2_COLORSPACE_REC709        = 3,
-
-	/* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
-	V4L2_COLORSPACE_BT878         = 4,
-
-	/* These should be useful.  Assume 601 extents. */
-	V4L2_COLORSPACE_470_SYSTEM_M  = 5,
-	V4L2_COLORSPACE_470_SYSTEM_BG = 6,
-
-	/* I know there will be cameras that send this.  So, this is
-	 * unspecified chromaticities and full 0-255 on each of the
-	 * Y'CbCr components
-	 */
-	V4L2_COLORSPACE_JPEG          = 7,
-
-	/* For RGB colourspaces, this is probably a good start. */
-	V4L2_COLORSPACE_SRGB          = 8,
-};
-
-enum v4l2_priority {
-	V4L2_PRIORITY_UNSET       = 0,  /* not initialized */
-	V4L2_PRIORITY_BACKGROUND  = 1,
-	V4L2_PRIORITY_INTERACTIVE = 2,
-	V4L2_PRIORITY_RECORD      = 3,
-	V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE,
-};
-
-struct v4l2_rect {
-	__s32   left;
-	__s32   top;
-	__s32   width;
-	__s32   height;
-};
-
-struct v4l2_fract {
-	__u32   numerator;
-	__u32   denominator;
-};
-
-/**
-  * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
-  *
-  * @driver:	   name of the driver module (e.g. "bttv")
-  * @card:	   name of the card (e.g. "Hauppauge WinTV")
-  * @bus_info:	   name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
-  * @version:	   KERNEL_VERSION
-  * @capabilities: capabilities of the physical device as a whole
-  * @device_caps:  capabilities accessed via this particular device (node)
-  * @reserved:	   reserved fields for future extensions
-  */
-struct v4l2_capability {
-	__u8	driver[16];
-	__u8	card[32];
-	__u8	bus_info[32];
-	__u32   version;
-	__u32	capabilities;
-	__u32	device_caps;
-	__u32	reserved[3];
-};
-
-/* Values for 'capabilities' field */
-#define V4L2_CAP_VIDEO_CAPTURE		0x00000001  /* Is a video capture device */
-#define V4L2_CAP_VIDEO_OUTPUT		0x00000002  /* Is a video output device */
-#define V4L2_CAP_VIDEO_OVERLAY		0x00000004  /* Can do video overlay */
-#define V4L2_CAP_VBI_CAPTURE		0x00000010  /* Is a raw VBI capture device */
-#define V4L2_CAP_VBI_OUTPUT		0x00000020  /* Is a raw VBI output device */
-#define V4L2_CAP_SLICED_VBI_CAPTURE	0x00000040  /* Is a sliced VBI capture device */
-#define V4L2_CAP_SLICED_VBI_OUTPUT	0x00000080  /* Is a sliced VBI output device */
-#define V4L2_CAP_RDS_CAPTURE		0x00000100  /* RDS data capture */
-#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY	0x00000200  /* Can do video output overlay */
-#define V4L2_CAP_HW_FREQ_SEEK		0x00000400  /* Can do hardware frequency seek  */
-#define V4L2_CAP_RDS_OUTPUT		0x00000800  /* Is an RDS encoder */
-
-/* Is a video capture device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_CAPTURE_MPLANE	0x00001000
-/* Is a video output device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_OUTPUT_MPLANE	0x00002000
-/* Is a video mem-to-mem device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_M2M_MPLANE	0x00004000
-/* Is a video mem-to-mem device */
-#define V4L2_CAP_VIDEO_M2M		0x00008000
-
-#define V4L2_CAP_TUNER			0x00010000  /* has a tuner */
-#define V4L2_CAP_AUDIO			0x00020000  /* has audio support */
-#define V4L2_CAP_RADIO			0x00040000  /* is a radio device */
-#define V4L2_CAP_MODULATOR		0x00080000  /* has a modulator */
-
-#define V4L2_CAP_READWRITE              0x01000000  /* read/write systemcalls */
-#define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
-#define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */
-
-#define V4L2_CAP_DEVICE_CAPS            0x80000000  /* sets device capabilities field */
-
-/*
- *	V I D E O   I M A G E   F O R M A T
- */
-struct v4l2_pix_format {
-	__u32         		width;
-	__u32			height;
-	__u32			pixelformat;
-	__u32			field;		/* enum v4l2_field */
-	__u32            	bytesperline;	/* for padding, zero if unused */
-	__u32          		sizeimage;
-	__u32			colorspace;	/* enum v4l2_colorspace */
-	__u32			priv;		/* private data, depends on pixelformat */
-};
-
-/*      Pixel format         FOURCC                          depth  Description  */
-
-/* RGB formats */
-#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
-#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
-#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
-#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
-#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
-#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
-#define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
-#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
-#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
-#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
-#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
-
-/* Grey formats */
-#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
-#define V4L2_PIX_FMT_Y4      v4l2_fourcc('Y', '0', '4', ' ') /*  4  Greyscale     */
-#define V4L2_PIX_FMT_Y6      v4l2_fourcc('Y', '0', '6', ' ') /*  6  Greyscale     */
-#define V4L2_PIX_FMT_Y10     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
-#define V4L2_PIX_FMT_Y12     v4l2_fourcc('Y', '1', '2', ' ') /* 12  Greyscale     */
-#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
-
-/* Grey bit-packed formats */
-#define V4L2_PIX_FMT_Y10BPACK    v4l2_fourcc('Y', '1', '0', 'B') /* 10  Greyscale bit-packed */
-
-/* Palette formats */
-#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
-
-/* Luminance+Chrominance formats */
-#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
-#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
-#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
-#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_VYUY    v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
-#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
-#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
-#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
-#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
-#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
-#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
-#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
-#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
-#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
-#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
-#define V4L2_PIX_FMT_M420    v4l2_fourcc('M', '4', '2', '0') /* 12  YUV 4:2:0 2 lines y, 1 line uv interleaved */
-
-/* two planes -- one Y, one Cr + Cb interleaved  */
-#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
-#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
-#define V4L2_PIX_FMT_NV16    v4l2_fourcc('N', 'V', '1', '6') /* 16  Y/CbCr 4:2:2  */
-#define V4L2_PIX_FMT_NV61    v4l2_fourcc('N', 'V', '6', '1') /* 16  Y/CrCb 4:2:2  */
-#define V4L2_PIX_FMT_NV24    v4l2_fourcc('N', 'V', '2', '4') /* 24  Y/CbCr 4:4:4  */
-#define V4L2_PIX_FMT_NV42    v4l2_fourcc('N', 'V', '4', '2') /* 24  Y/CrCb 4:4:4  */
-
-/* two non contiguous planes - one Y, one Cr + Cb interleaved  */
-#define V4L2_PIX_FMT_NV12M   v4l2_fourcc('N', 'M', '1', '2') /* 12  Y/CbCr 4:2:0  */
-#define V4L2_PIX_FMT_NV21M   v4l2_fourcc('N', 'M', '2', '1') /* 21  Y/CrCb 4:2:0  */
-#define V4L2_PIX_FMT_NV12MT  v4l2_fourcc('T', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 64x32 macroblocks */
-#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 16x16 macroblocks */
-
-/* three non contiguous planes - Y, Cb, Cr */
-#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12  YUV420 planar */
-#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12  YVU420 planar */
-
-/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
-#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG8  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB8  v4l2_fourcc('R', 'G', 'G', 'B') /*  8  RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10  RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12  RGRG.. GBGB.. */
-	/* 10bit raw bayer DPCM compressed to 8 bits */
-#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
-#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
-#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
-#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
-	/*
-	 * 10bit raw bayer, expanded to 16 bits
-	 * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
-	 */
-#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
-
-/* compressed formats */
-#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
-#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
-#define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
-#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
-#define V4L2_PIX_FMT_H264     v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
-#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
-#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */
-#define V4L2_PIX_FMT_H263     v4l2_fourcc('H', '2', '6', '3') /* H263          */
-#define V4L2_PIX_FMT_MPEG1    v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES     */
-#define V4L2_PIX_FMT_MPEG2    v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES     */
-#define V4L2_PIX_FMT_MPEG4    v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES     */
-#define V4L2_PIX_FMT_XVID     v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid           */
-#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
-#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
-#define V4L2_PIX_FMT_VP8      v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
-
-/*  Vendor-specific formats   */
-#define V4L2_PIX_FMT_CPIA1    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
-#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
-#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
-#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
-#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
-#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
-#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
-#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
-#define V4L2_PIX_FMT_SPCA505  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
-#define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
-#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
-#define V4L2_PIX_FMT_OV511    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
-#define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
-#define V4L2_PIX_FMT_STV0680  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
-#define V4L2_PIX_FMT_TM6000   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
-#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
-#define V4L2_PIX_FMT_KONICA420  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
-#define V4L2_PIX_FMT_JPGL	v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
-#define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
-#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
-
-/*
- *	F O R M A T   E N U M E R A T I O N
- */
-struct v4l2_fmtdesc {
-	__u32		    index;             /* Format number      */
-	__u32		    type;              /* enum v4l2_buf_type */
-	__u32               flags;
-	__u8		    description[32];   /* Description string */
-	__u32		    pixelformat;       /* Format fourcc      */
-	__u32		    reserved[4];
-};
-
-#define V4L2_FMT_FLAG_COMPRESSED 0x0001
-#define V4L2_FMT_FLAG_EMULATED   0x0002
-
-#if 1
-	/* Experimental Frame Size and frame rate enumeration */
-/*
- *	F R A M E   S I Z E   E N U M E R A T I O N
- */
-enum v4l2_frmsizetypes {
-	V4L2_FRMSIZE_TYPE_DISCRETE	= 1,
-	V4L2_FRMSIZE_TYPE_CONTINUOUS	= 2,
-	V4L2_FRMSIZE_TYPE_STEPWISE	= 3,
-};
-
-struct v4l2_frmsize_discrete {
-	__u32			width;		/* Frame width [pixel] */
-	__u32			height;		/* Frame height [pixel] */
-};
-
-struct v4l2_frmsize_stepwise {
-	__u32			min_width;	/* Minimum frame width [pixel] */
-	__u32			max_width;	/* Maximum frame width [pixel] */
-	__u32			step_width;	/* Frame width step size [pixel] */
-	__u32			min_height;	/* Minimum frame height [pixel] */
-	__u32			max_height;	/* Maximum frame height [pixel] */
-	__u32			step_height;	/* Frame height step size [pixel] */
-};
-
-struct v4l2_frmsizeenum {
-	__u32			index;		/* Frame size number */
-	__u32			pixel_format;	/* Pixel format */
-	__u32			type;		/* Frame size type the device supports. */
-
-	union {					/* Frame size */
-		struct v4l2_frmsize_discrete	discrete;
-		struct v4l2_frmsize_stepwise	stepwise;
-	};
-
-	__u32   reserved[2];			/* Reserved space for future use */
-};
-
-/*
- *	F R A M E   R A T E   E N U M E R A T I O N
- */
-enum v4l2_frmivaltypes {
-	V4L2_FRMIVAL_TYPE_DISCRETE	= 1,
-	V4L2_FRMIVAL_TYPE_CONTINUOUS	= 2,
-	V4L2_FRMIVAL_TYPE_STEPWISE	= 3,
-};
-
-struct v4l2_frmival_stepwise {
-	struct v4l2_fract	min;		/* Minimum frame interval [s] */
-	struct v4l2_fract	max;		/* Maximum frame interval [s] */
-	struct v4l2_fract	step;		/* Frame interval step size [s] */
-};
-
-struct v4l2_frmivalenum {
-	__u32			index;		/* Frame format index */
-	__u32			pixel_format;	/* Pixel format */
-	__u32			width;		/* Frame width */
-	__u32			height;		/* Frame height */
-	__u32			type;		/* Frame interval type the device supports. */
-
-	union {					/* Frame interval */
-		struct v4l2_fract		discrete;
-		struct v4l2_frmival_stepwise	stepwise;
-	};
-
-	__u32	reserved[2];			/* Reserved space for future use */
-};
-#endif
-
-/*
- *	T I M E C O D E
- */
-struct v4l2_timecode {
-	__u32	type;
-	__u32	flags;
-	__u8	frames;
-	__u8	seconds;
-	__u8	minutes;
-	__u8	hours;
-	__u8	userbits[4];
-};
-
-/*  Type  */
-#define V4L2_TC_TYPE_24FPS		1
-#define V4L2_TC_TYPE_25FPS		2
-#define V4L2_TC_TYPE_30FPS		3
-#define V4L2_TC_TYPE_50FPS		4
-#define V4L2_TC_TYPE_60FPS		5
-
-/*  Flags  */
-#define V4L2_TC_FLAG_DROPFRAME		0x0001 /* "drop-frame" mode */
-#define V4L2_TC_FLAG_COLORFRAME		0x0002
-#define V4L2_TC_USERBITS_field		0x000C
-#define V4L2_TC_USERBITS_USERDEFINED	0x0000
-#define V4L2_TC_USERBITS_8BITCHARS	0x0008
-/* The above is based on SMPTE timecodes */
-
-struct v4l2_jpegcompression {
-	int quality;
-
-	int  APPn;              /* Number of APP segment to be written,
-				 * must be 0..15 */
-	int  APP_len;           /* Length of data in JPEG APPn segment */
-	char APP_data[60];      /* Data in the JPEG APPn segment. */
-
-	int  COM_len;           /* Length of data in JPEG COM segment */
-	char COM_data[60];      /* Data in JPEG COM segment */
-
-	__u32 jpeg_markers;     /* Which markers should go into the JPEG
-				 * output. Unless you exactly know what
-				 * you do, leave them untouched.
-				 * Inluding less markers will make the
-				 * resulting code smaller, but there will
-				 * be fewer applications which can read it.
-				 * The presence of the APP and COM marker
-				 * is influenced by APP_len and COM_len
-				 * ONLY, not by this property! */
-
-#define V4L2_JPEG_MARKER_DHT (1<<3)    /* Define Huffman Tables */
-#define V4L2_JPEG_MARKER_DQT (1<<4)    /* Define Quantization Tables */
-#define V4L2_JPEG_MARKER_DRI (1<<5)    /* Define Restart Interval */
-#define V4L2_JPEG_MARKER_COM (1<<6)    /* Comment segment */
-#define V4L2_JPEG_MARKER_APP (1<<7)    /* App segment, driver will
-					* allways use APP0 */
-};
-
-/*
- *	M E M O R Y - M A P P I N G   B U F F E R S
- */
-struct v4l2_requestbuffers {
-	__u32			count;
-	__u32			type;		/* enum v4l2_buf_type */
-	__u32			memory;		/* enum v4l2_memory */
-	__u32			reserved[2];
-};
-
-/**
- * struct v4l2_plane - plane info for multi-planar buffers
- * @bytesused:		number of bytes occupied by data in the plane (payload)
- * @length:		size of this plane (NOT the payload) in bytes
- * @mem_offset:		when memory in the associated struct v4l2_buffer is
- *			V4L2_MEMORY_MMAP, equals the offset from the start of
- *			the device memory for this plane (or is a "cookie" that
- *			should be passed to mmap() called on the video node)
- * @userptr:		when memory is V4L2_MEMORY_USERPTR, a userspace pointer
- *			pointing to this plane
- * @data_offset:	offset in the plane to the start of data; usually 0,
- *			unless there is a header in front of the data
- *
- * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
- * with two planes can have one plane for Y, and another for interleaved CbCr
- * components. Each plane can reside in a separate memory buffer, or even in
- * a completely separate memory node (e.g. in embedded devices).
- */
-struct v4l2_plane {
-	__u32			bytesused;
-	__u32			length;
-	union {
-		__u32		mem_offset;
-		unsigned long	userptr;
-	} m;
-	__u32			data_offset;
-	__u32			reserved[11];
-};
-
-/**
- * struct v4l2_buffer - video buffer info
- * @index:	id number of the buffer
- * @type:	enum v4l2_buf_type; buffer type (type == *_MPLANE for
- *		multiplanar buffers);
- * @bytesused:	number of bytes occupied by data in the buffer (payload);
- *		unused (set to 0) for multiplanar buffers
- * @flags:	buffer informational flags
- * @field:	enum v4l2_field; field order of the image in the buffer
- * @timestamp:	frame timestamp
- * @timecode:	frame timecode
- * @sequence:	sequence count of this frame
- * @memory:	enum v4l2_memory; the method, in which the actual video data is
- *		passed
- * @offset:	for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
- *		offset from the start of the device memory for this plane,
- *		(or a "cookie" that should be passed to mmap() as offset)
- * @userptr:	for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
- *		a userspace pointer pointing to this buffer
- * @planes:	for multiplanar buffers; userspace pointer to the array of plane
- *		info structs for this buffer
- * @length:	size in bytes of the buffer (NOT its payload) for single-plane
- *		buffers (when type != *_MPLANE); number of elements in the
- *		planes array for multi-plane buffers
- * @input:	input number from which the video data has has been captured
- *
- * Contains data exchanged by application and driver using one of the Streaming
- * I/O methods.
- */
-struct v4l2_buffer {
-	__u32			index;
-	__u32			type;
-	__u32			bytesused;
-	__u32			flags;
-	__u32			field;
-	struct timeval		timestamp;
-	struct v4l2_timecode	timecode;
-	__u32			sequence;
-
-	/* memory location */
-	__u32			memory;
-	union {
-		__u32           offset;
-		unsigned long   userptr;
-		struct v4l2_plane *planes;
-	} m;
-	__u32			length;
-	__u32			reserved2;
-	__u32			reserved;
-};
-
-/*  Flags for 'flags' field */
-#define V4L2_BUF_FLAG_MAPPED	0x0001  /* Buffer is mapped (flag) */
-#define V4L2_BUF_FLAG_QUEUED	0x0002	/* Buffer is queued for processing */
-#define V4L2_BUF_FLAG_DONE	0x0004	/* Buffer is ready */
-#define V4L2_BUF_FLAG_KEYFRAME	0x0008	/* Image is a keyframe (I-frame) */
-#define V4L2_BUF_FLAG_PFRAME	0x0010	/* Image is a P-frame */
-#define V4L2_BUF_FLAG_BFRAME	0x0020	/* Image is a B-frame */
-/* Buffer is ready, but the data contained within is corrupted. */
-#define V4L2_BUF_FLAG_ERROR	0x0040
-#define V4L2_BUF_FLAG_TIMECODE	0x0100	/* timecode field is valid */
-#define V4L2_BUF_FLAG_PREPARED	0x0400	/* Buffer is prepared for queuing */
-/* Cache handling flags */
-#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE	0x0800
-#define V4L2_BUF_FLAG_NO_CACHE_CLEAN		0x1000
-
-/*
- *	O V E R L A Y   P R E V I E W
- */
-struct v4l2_framebuffer {
-	__u32			capability;
-	__u32			flags;
-/* FIXME: in theory we should pass something like PCI device + memory
- * region + offset instead of some physical address */
-	void                    *base;
-	struct v4l2_pix_format	fmt;
-};
-/*  Flags for the 'capability' field. Read only */
-#define V4L2_FBUF_CAP_EXTERNOVERLAY	0x0001
-#define V4L2_FBUF_CAP_CHROMAKEY		0x0002
-#define V4L2_FBUF_CAP_LIST_CLIPPING     0x0004
-#define V4L2_FBUF_CAP_BITMAP_CLIPPING	0x0008
-#define V4L2_FBUF_CAP_LOCAL_ALPHA	0x0010
-#define V4L2_FBUF_CAP_GLOBAL_ALPHA	0x0020
-#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA	0x0040
-#define V4L2_FBUF_CAP_SRC_CHROMAKEY	0x0080
-/*  Flags for the 'flags' field. */
-#define V4L2_FBUF_FLAG_PRIMARY		0x0001
-#define V4L2_FBUF_FLAG_OVERLAY		0x0002
-#define V4L2_FBUF_FLAG_CHROMAKEY	0x0004
-#define V4L2_FBUF_FLAG_LOCAL_ALPHA	0x0008
-#define V4L2_FBUF_FLAG_GLOBAL_ALPHA	0x0010
-#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA	0x0020
-#define V4L2_FBUF_FLAG_SRC_CHROMAKEY	0x0040
-
-struct v4l2_clip {
-	struct v4l2_rect        c;
-	struct v4l2_clip	__user *next;
-};
-
-struct v4l2_window {
-	struct v4l2_rect        w;
-	__u32			field;	 /* enum v4l2_field */
-	__u32			chromakey;
-	struct v4l2_clip	__user *clips;
-	__u32			clipcount;
-	void			__user *bitmap;
-	__u8                    global_alpha;
-};
-
-/*
- *	C A P T U R E   P A R A M E T E R S
- */
-struct v4l2_captureparm {
-	__u32		   capability;	  /*  Supported modes */
-	__u32		   capturemode;	  /*  Current mode */
-	struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
-	__u32		   extendedmode;  /*  Driver-specific extensions */
-	__u32              readbuffers;   /*  # of buffers for read */
-	__u32		   reserved[4];
-};
-
-/*  Flags for 'capability' and 'capturemode' fields */
-#define V4L2_MODE_HIGHQUALITY	0x0001	/*  High quality imaging mode */
-#define V4L2_CAP_TIMEPERFRAME	0x1000	/*  timeperframe field is supported */
-
-struct v4l2_outputparm {
-	__u32		   capability;	 /*  Supported modes */
-	__u32		   outputmode;	 /*  Current mode */
-	struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
-	__u32		   extendedmode; /*  Driver-specific extensions */
-	__u32              writebuffers; /*  # of buffers for write */
-	__u32		   reserved[4];
-};
-
-/*
- *	I N P U T   I M A G E   C R O P P I N G
- */
-struct v4l2_cropcap {
-	__u32			type;	/* enum v4l2_buf_type */
-	struct v4l2_rect        bounds;
-	struct v4l2_rect        defrect;
-	struct v4l2_fract       pixelaspect;
-};
-
-struct v4l2_crop {
-	__u32			type;	/* enum v4l2_buf_type */
-	struct v4l2_rect        c;
-};
-
-/**
- * struct v4l2_selection - selection info
- * @type:	buffer type (do not use *_MPLANE types)
- * @target:	Selection target, used to choose one of possible rectangles;
- *		defined in v4l2-common.h; V4L2_SEL_TGT_* .
- * @flags:	constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
- * @r:		coordinates of selection window
- * @reserved:	for future use, rounds structure size to 64 bytes, set to zero
- *
- * Hardware may use multiple helper windows to process a video stream.
- * The structure is used to exchange this selection areas between
- * an application and a driver.
- */
-struct v4l2_selection {
-	__u32			type;
-	__u32			target;
-	__u32                   flags;
-	struct v4l2_rect        r;
-	__u32                   reserved[9];
-};
-
-
-/*
- *      A N A L O G   V I D E O   S T A N D A R D
- */
-
-typedef __u64 v4l2_std_id;
-
-/* one bit for each */
-#define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
-#define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
-#define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
-#define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
-#define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
-#define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
-#define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
-#define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
-
-#define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
-#define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
-#define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
-#define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
-
-#define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)	/* BTSC */
-#define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)	/* EIA-J */
-#define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
-#define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)	/* FM A2 */
-
-#define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
-#define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
-#define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
-#define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
-#define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
-#define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
-#define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
-#define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)
-
-/* ATSC/HDTV */
-#define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
-#define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
-
-/* FIXME:
-   Although std_id is 64 bits, there is an issue on PPC32 architecture that
-   makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
-   this value to 32 bits.
-   As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
-   it should work fine. However, if needed to add more than two standards,
-   v4l2-common.c should be fixed.
- */
-
-/*
- * Some macros to merge video standards in order to make live easier for the
- * drivers and V4L2 applications
- */
-
-/*
- * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
- * Missing here.
- */
-#define V4L2_STD_NTSC           (V4L2_STD_NTSC_M	|\
-				 V4L2_STD_NTSC_M_JP     |\
-				 V4L2_STD_NTSC_M_KR)
-/* Secam macros */
-#define V4L2_STD_SECAM_DK      	(V4L2_STD_SECAM_D	|\
-				 V4L2_STD_SECAM_K	|\
-				 V4L2_STD_SECAM_K1)
-/* All Secam Standards */
-#define V4L2_STD_SECAM		(V4L2_STD_SECAM_B	|\
-				 V4L2_STD_SECAM_G	|\
-				 V4L2_STD_SECAM_H	|\
-				 V4L2_STD_SECAM_DK	|\
-				 V4L2_STD_SECAM_L       |\
-				 V4L2_STD_SECAM_LC)
-/* PAL macros */
-#define V4L2_STD_PAL_BG		(V4L2_STD_PAL_B		|\
-				 V4L2_STD_PAL_B1	|\
-				 V4L2_STD_PAL_G)
-#define V4L2_STD_PAL_DK		(V4L2_STD_PAL_D		|\
-				 V4L2_STD_PAL_D1	|\
-				 V4L2_STD_PAL_K)
-/*
- * "Common" PAL - This macro is there to be compatible with the old
- * V4L1 concept of "PAL": /BGDKHI.
- * Several PAL standards are mising here: /M, /N and /Nc
- */
-#define V4L2_STD_PAL		(V4L2_STD_PAL_BG	|\
-				 V4L2_STD_PAL_DK	|\
-				 V4L2_STD_PAL_H		|\
-				 V4L2_STD_PAL_I)
-/* Chroma "agnostic" standards */
-#define V4L2_STD_B		(V4L2_STD_PAL_B		|\
-				 V4L2_STD_PAL_B1	|\
-				 V4L2_STD_SECAM_B)
-#define V4L2_STD_G		(V4L2_STD_PAL_G		|\
-				 V4L2_STD_SECAM_G)
-#define V4L2_STD_H		(V4L2_STD_PAL_H		|\
-				 V4L2_STD_SECAM_H)
-#define V4L2_STD_L		(V4L2_STD_SECAM_L	|\
-				 V4L2_STD_SECAM_LC)
-#define V4L2_STD_GH		(V4L2_STD_G		|\
-				 V4L2_STD_H)
-#define V4L2_STD_DK		(V4L2_STD_PAL_DK	|\
-				 V4L2_STD_SECAM_DK)
-#define V4L2_STD_BG		(V4L2_STD_B		|\
-				 V4L2_STD_G)
-#define V4L2_STD_MN		(V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc	|\
-				 V4L2_STD_NTSC)
-
-/* Standards where MTS/BTSC stereo could be found */
-#define V4L2_STD_MTS		(V4L2_STD_NTSC_M	|\
-				 V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc)
-
-/* Standards for Countries with 60Hz Line frequency */
-#define V4L2_STD_525_60		(V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_60	|\
-				 V4L2_STD_NTSC		|\
-				 V4L2_STD_NTSC_443)
-/* Standards for Countries with 50Hz Line frequency */
-#define V4L2_STD_625_50		(V4L2_STD_PAL		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc	|\
-				 V4L2_STD_SECAM)
-
-#define V4L2_STD_ATSC           (V4L2_STD_ATSC_8_VSB    |\
-				 V4L2_STD_ATSC_16_VSB)
-/* Macros with none and all analog standards */
-#define V4L2_STD_UNKNOWN        0
-#define V4L2_STD_ALL            (V4L2_STD_525_60	|\
-				 V4L2_STD_625_50)
-
-struct v4l2_standard {
-	__u32		     index;
-	v4l2_std_id          id;
-	__u8		     name[24];
-	struct v4l2_fract    frameperiod; /* Frames, not fields */
-	__u32		     framelines;
-	__u32		     reserved[4];
-};
-
-/* The DV Preset API is deprecated in favor of the DV Timings API.
-   New drivers shouldn't use this anymore! */
-
-/*
- *	V I D E O	T I M I N G S	D V	P R E S E T
- */
-struct v4l2_dv_preset {
-	__u32	preset;
-	__u32	reserved[4];
-};
-
-/*
- *	D V	P R E S E T S	E N U M E R A T I O N
- */
-struct v4l2_dv_enum_preset {
-	__u32	index;
-	__u32	preset;
-	__u8	name[32]; /* Name of the preset timing */
-	__u32	width;
-	__u32	height;
-	__u32	reserved[4];
-};
-
-/*
- * 	D V	P R E S E T	V A L U E S
- */
-#define		V4L2_DV_INVALID		0
-#define		V4L2_DV_480P59_94	1 /* BT.1362 */
-#define		V4L2_DV_576P50		2 /* BT.1362 */
-#define		V4L2_DV_720P24		3 /* SMPTE 296M */
-#define		V4L2_DV_720P25		4 /* SMPTE 296M */
-#define		V4L2_DV_720P30		5 /* SMPTE 296M */
-#define		V4L2_DV_720P50		6 /* SMPTE 296M */
-#define		V4L2_DV_720P59_94	7 /* SMPTE 274M */
-#define		V4L2_DV_720P60		8 /* SMPTE 274M/296M */
-#define		V4L2_DV_1080I29_97	9 /* BT.1120/ SMPTE 274M */
-#define		V4L2_DV_1080I30		10 /* BT.1120/ SMPTE 274M */
-#define		V4L2_DV_1080I25		11 /* BT.1120 */
-#define		V4L2_DV_1080I50		12 /* SMPTE 296M */
-#define		V4L2_DV_1080I60		13 /* SMPTE 296M */
-#define		V4L2_DV_1080P24		14 /* SMPTE 296M */
-#define		V4L2_DV_1080P25		15 /* SMPTE 296M */
-#define		V4L2_DV_1080P30		16 /* SMPTE 296M */
-#define		V4L2_DV_1080P50		17 /* BT.1120 */
-#define		V4L2_DV_1080P60		18 /* BT.1120 */
-
-/*
- *	D V 	B T	T I M I N G S
- */
-
-/** struct v4l2_bt_timings - BT.656/BT.1120 timing data
- * @width:	total width of the active video in pixels
- * @height:	total height of the active video in lines
- * @interlaced:	Interlaced or progressive
- * @polarities:	Positive or negative polarities
- * @pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @hfrontporch:Horizontal front porch in pixels
- * @hsync:	Horizontal Sync length in pixels
- * @hbackporch:	Horizontal back porch in pixels
- * @vfrontporch:Vertical front porch in lines
- * @vsync:	Vertical Sync length in lines
- * @vbackporch:	Vertical back porch in lines
- * @il_vfrontporch:Vertical front porch for the even field
- *		(aka field 2) of interlaced field formats
- * @il_vsync:	Vertical Sync length for the even field
- *		(aka field 2) of interlaced field formats
- * @il_vbackporch:Vertical back porch for the even field
- *		(aka field 2) of interlaced field formats
- * @standards:	Standards the timing belongs to
- * @flags:	Flags
- * @reserved:	Reserved fields, must be zeroed.
- *
- * A note regarding vertical interlaced timings: height refers to the total
- * height of the active video frame (= two fields). The blanking timings refer
- * to the blanking of each field. So the height of the total frame is
- * calculated as follows:
- *
- * tot_height = height + vfrontporch + vsync + vbackporch +
- *                       il_vfrontporch + il_vsync + il_vbackporch
- *
- * The active height of each field is height / 2.
- */
-struct v4l2_bt_timings {
-	__u32	width;
-	__u32	height;
-	__u32	interlaced;
-	__u32	polarities;
-	__u64	pixelclock;
-	__u32	hfrontporch;
-	__u32	hsync;
-	__u32	hbackporch;
-	__u32	vfrontporch;
-	__u32	vsync;
-	__u32	vbackporch;
-	__u32	il_vfrontporch;
-	__u32	il_vsync;
-	__u32	il_vbackporch;
-	__u32	standards;
-	__u32	flags;
-	__u32	reserved[14];
-} __attribute__ ((packed));
-
-/* Interlaced or progressive format */
-#define	V4L2_DV_PROGRESSIVE	0
-#define	V4L2_DV_INTERLACED	1
-
-/* Polarities. If bit is not set, it is assumed to be negative polarity */
-#define V4L2_DV_VSYNC_POS_POL	0x00000001
-#define V4L2_DV_HSYNC_POS_POL	0x00000002
-
-/* Timings standards */
-#define V4L2_DV_BT_STD_CEA861	(1 << 0)  /* CEA-861 Digital TV Profile */
-#define V4L2_DV_BT_STD_DMT	(1 << 1)  /* VESA Discrete Monitor Timings */
-#define V4L2_DV_BT_STD_CVT	(1 << 2)  /* VESA Coordinated Video Timings */
-#define V4L2_DV_BT_STD_GTF	(1 << 3)  /* VESA Generalized Timings Formula */
-
-/* Flags */
-
-/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
-   GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
-   intervals are reduced, allowing a higher resolution over the same
-   bandwidth. This is a read-only flag. */
-#define V4L2_DV_FL_REDUCED_BLANKING		(1 << 0)
-/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
-   of six. These formats can be optionally played at 1 / 1.001 speed.
-   This is a read-only flag. */
-#define V4L2_DV_FL_CAN_REDUCE_FPS		(1 << 1)
-/* CEA-861 specific: only valid for video transmitters, the flag is cleared
-   by receivers.
-   If the framerate of the format is a multiple of six, then the pixelclock
-   used to set up the transmitter is divided by 1.001 to make it compatible
-   with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
-   29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
-   such frequencies, then the flag will also be cleared. */
-#define V4L2_DV_FL_REDUCED_FPS			(1 << 2)
-/* Specific to interlaced formats: if set, then field 1 is really one half-line
-   longer and field 2 is really one half-line shorter, so each field has
-   exactly the same number of half-lines. Whether half-lines can be detected
-   or used depends on the hardware. */
-#define V4L2_DV_FL_HALF_LINE			(1 << 0)
-
-
-/** struct v4l2_dv_timings - DV timings
- * @type:	the type of the timings
- * @bt:	BT656/1120 timings
- */
-struct v4l2_dv_timings {
-	__u32 type;
-	union {
-		struct v4l2_bt_timings	bt;
-		__u32	reserved[32];
-	};
-} __attribute__ ((packed));
-
-/* Values for the type field */
-#define V4L2_DV_BT_656_1120	0	/* BT.656/1120 timing type */
-
-
-/** struct v4l2_enum_dv_timings - DV timings enumeration
- * @index:	enumeration index
- * @reserved:	must be zeroed
- * @timings:	the timings for the given index
- */
-struct v4l2_enum_dv_timings {
-	__u32 index;
-	__u32 reserved[3];
-	struct v4l2_dv_timings timings;
-};
-
-/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities
- * @min_width:		width in pixels
- * @max_width:		width in pixels
- * @min_height:		height in lines
- * @max_height:		height in lines
- * @min_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @max_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @standards:		Supported standards
- * @capabilities:	Supported capabilities
- * @reserved:		Must be zeroed
- */
-struct v4l2_bt_timings_cap {
-	__u32	min_width;
-	__u32	max_width;
-	__u32	min_height;
-	__u32	max_height;
-	__u64	min_pixelclock;
-	__u64	max_pixelclock;
-	__u32	standards;
-	__u32	capabilities;
-	__u32	reserved[16];
-} __attribute__ ((packed));
-
-/* Supports interlaced formats */
-#define V4L2_DV_BT_CAP_INTERLACED	(1 << 0)
-/* Supports progressive formats */
-#define V4L2_DV_BT_CAP_PROGRESSIVE	(1 << 1)
-/* Supports CVT/GTF reduced blanking */
-#define V4L2_DV_BT_CAP_REDUCED_BLANKING	(1 << 2)
-/* Supports custom formats */
-#define V4L2_DV_BT_CAP_CUSTOM		(1 << 3)
-
-/** struct v4l2_dv_timings_cap - DV timings capabilities
- * @type:	the type of the timings (same as in struct v4l2_dv_timings)
- * @bt:		the BT656/1120 timings capabilities
- */
-struct v4l2_dv_timings_cap {
-	__u32 type;
-	__u32 reserved[3];
-	union {
-		struct v4l2_bt_timings_cap bt;
-		__u32 raw_data[32];
-	};
-};
-
-
-/*
- *	V I D E O   I N P U T S
- */
-struct v4l2_input {
-	__u32	     index;		/*  Which input */
-	__u8	     name[32];		/*  Label */
-	__u32	     type;		/*  Type of input */
-	__u32	     audioset;		/*  Associated audios (bitfield) */
-	__u32        tuner;             /*  enum v4l2_tuner_type */
-	v4l2_std_id  std;
-	__u32	     status;
-	__u32	     capabilities;
-	__u32	     reserved[3];
-};
-
-/*  Values for the 'type' field */
-#define V4L2_INPUT_TYPE_TUNER		1
-#define V4L2_INPUT_TYPE_CAMERA		2
-
-/* field 'status' - general */
-#define V4L2_IN_ST_NO_POWER    0x00000001  /* Attached device is off */
-#define V4L2_IN_ST_NO_SIGNAL   0x00000002
-#define V4L2_IN_ST_NO_COLOR    0x00000004
-
-/* field 'status' - sensor orientation */
-/* If sensor is mounted upside down set both bits */
-#define V4L2_IN_ST_HFLIP       0x00000010 /* Frames are flipped horizontally */
-#define V4L2_IN_ST_VFLIP       0x00000020 /* Frames are flipped vertically */
-
-/* field 'status' - analog */
-#define V4L2_IN_ST_NO_H_LOCK   0x00000100  /* No horizontal sync lock */
-#define V4L2_IN_ST_COLOR_KILL  0x00000200  /* Color killer is active */
-
-/* field 'status' - digital */
-#define V4L2_IN_ST_NO_SYNC     0x00010000  /* No synchronization lock */
-#define V4L2_IN_ST_NO_EQU      0x00020000  /* No equalizer lock */
-#define V4L2_IN_ST_NO_CARRIER  0x00040000  /* Carrier recovery failed */
-
-/* field 'status' - VCR and set-top box */
-#define V4L2_IN_ST_MACROVISION 0x01000000  /* Macrovision detected */
-#define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
-#define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
-
-/* capabilities flags */
-#define V4L2_IN_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_IN_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_IN_CAP_CUSTOM_TIMINGS	V4L2_IN_CAP_DV_TIMINGS /* For compatibility */
-#define V4L2_IN_CAP_STD			0x00000004 /* Supports S_STD */
-
-/*
- *	V I D E O   O U T P U T S
- */
-struct v4l2_output {
-	__u32	     index;		/*  Which output */
-	__u8	     name[32];		/*  Label */
-	__u32	     type;		/*  Type of output */
-	__u32	     audioset;		/*  Associated audios (bitfield) */
-	__u32	     modulator;         /*  Associated modulator */
-	v4l2_std_id  std;
-	__u32	     capabilities;
-	__u32	     reserved[3];
-};
-/*  Values for the 'type' field */
-#define V4L2_OUTPUT_TYPE_MODULATOR		1
-#define V4L2_OUTPUT_TYPE_ANALOG			2
-#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY	3
-
-/* capabilities flags */
-#define V4L2_OUT_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_OUT_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_OUT_CAP_CUSTOM_TIMINGS	V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */
-#define V4L2_OUT_CAP_STD		0x00000004 /* Supports S_STD */
-
-/*
- *	C O N T R O L S
- */
-struct v4l2_control {
-	__u32		     id;
-	__s32		     value;
-};
-
-struct v4l2_ext_control {
-	__u32 id;
-	__u32 size;
-	__u32 reserved2[1];
-	union {
-		__s32 value;
-		__s64 value64;
-		char *string;
-	};
-} __attribute__ ((packed));
-
-struct v4l2_ext_controls {
-	__u32 ctrl_class;
-	__u32 count;
-	__u32 error_idx;
-	__u32 reserved[2];
-	struct v4l2_ext_control *controls;
-};
-
-#define V4L2_CTRL_ID_MASK      	  (0x0fffffff)
-#define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
-#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
-
-enum v4l2_ctrl_type {
-	V4L2_CTRL_TYPE_INTEGER	     = 1,
-	V4L2_CTRL_TYPE_BOOLEAN	     = 2,
-	V4L2_CTRL_TYPE_MENU	     = 3,
-	V4L2_CTRL_TYPE_BUTTON	     = 4,
-	V4L2_CTRL_TYPE_INTEGER64     = 5,
-	V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
-	V4L2_CTRL_TYPE_STRING        = 7,
-	V4L2_CTRL_TYPE_BITMASK       = 8,
-	V4L2_CTRL_TYPE_INTEGER_MENU = 9,
-};
-
-/*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
-struct v4l2_queryctrl {
-	__u32		     id;
-	__u32		     type;	/* enum v4l2_ctrl_type */
-	__u8		     name[32];	/* Whatever */
-	__s32		     minimum;	/* Note signedness */
-	__s32		     maximum;
-	__s32		     step;
-	__s32		     default_value;
-	__u32                flags;
-	__u32		     reserved[2];
-};
-
-/*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
-struct v4l2_querymenu {
-	__u32		id;
-	__u32		index;
-	union {
-		__u8	name[32];	/* Whatever */
-		__s64	value;
-	};
-	__u32		reserved;
-} __attribute__ ((packed));
-
-/*  Control flags  */
-#define V4L2_CTRL_FLAG_DISABLED		0x0001
-#define V4L2_CTRL_FLAG_GRABBED		0x0002
-#define V4L2_CTRL_FLAG_READ_ONLY 	0x0004
-#define V4L2_CTRL_FLAG_UPDATE 		0x0008
-#define V4L2_CTRL_FLAG_INACTIVE 	0x0010
-#define V4L2_CTRL_FLAG_SLIDER 		0x0020
-#define V4L2_CTRL_FLAG_WRITE_ONLY 	0x0040
-#define V4L2_CTRL_FLAG_VOLATILE		0x0080
-
-/*  Query flag, to be ORed with the control ID */
-#define V4L2_CTRL_FLAG_NEXT_CTRL	0x80000000
-
-/*  User-class control IDs defined by V4L2 */
-#define V4L2_CID_MAX_CTRLS		1024
-/*  IDs reserved for driver specific controls */
-#define V4L2_CID_PRIVATE_BASE		0x08000000
-
-
-/*  DV-class control IDs defined by V4L2 */
-#define V4L2_CID_DV_CLASS_BASE			(V4L2_CTRL_CLASS_DV | 0x900)
-#define V4L2_CID_DV_CLASS			(V4L2_CTRL_CLASS_DV | 1)
-
-#define	V4L2_CID_DV_TX_HOTPLUG			(V4L2_CID_DV_CLASS_BASE + 1)
-#define	V4L2_CID_DV_TX_RXSENSE			(V4L2_CID_DV_CLASS_BASE + 2)
-#define	V4L2_CID_DV_TX_EDID_PRESENT		(V4L2_CID_DV_CLASS_BASE + 3)
-#define	V4L2_CID_DV_TX_MODE			(V4L2_CID_DV_CLASS_BASE + 4)
-enum v4l2_dv_tx_mode {
-	V4L2_DV_TX_MODE_DVI_D	= 0,
-	V4L2_DV_TX_MODE_HDMI	= 1,
-};
-#define V4L2_CID_DV_TX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 5)
-enum v4l2_dv_rgb_range {
-	V4L2_DV_RGB_RANGE_AUTO	  = 0,
-	V4L2_DV_RGB_RANGE_LIMITED = 1,
-	V4L2_DV_RGB_RANGE_FULL	  = 2,
-};
-
-#define	V4L2_CID_DV_RX_POWER_PRESENT		(V4L2_CID_DV_CLASS_BASE + 100)
-#define V4L2_CID_DV_RX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 101)
-
-/*
- *	T U N I N G
- */
-struct v4l2_tuner {
-	__u32                   index;
-	__u8			name[32];
-	__u32			type;	/* enum v4l2_tuner_type */
-	__u32			capability;
-	__u32			rangelow;
-	__u32			rangehigh;
-	__u32			rxsubchans;
-	__u32			audmode;
-	__s32			signal;
-	__s32			afc;
-	__u32			reserved[4];
-};
-
-struct v4l2_modulator {
-	__u32			index;
-	__u8			name[32];
-	__u32			capability;
-	__u32			rangelow;
-	__u32			rangehigh;
-	__u32			txsubchans;
-	__u32			reserved[4];
-};
-
-/*  Flags for the 'capability' field */
-#define V4L2_TUNER_CAP_LOW		0x0001
-#define V4L2_TUNER_CAP_NORM		0x0002
-#define V4L2_TUNER_CAP_HWSEEK_BOUNDED	0x0004
-#define V4L2_TUNER_CAP_HWSEEK_WRAP	0x0008
-#define V4L2_TUNER_CAP_STEREO		0x0010
-#define V4L2_TUNER_CAP_LANG2		0x0020
-#define V4L2_TUNER_CAP_SAP		0x0020
-#define V4L2_TUNER_CAP_LANG1		0x0040
-#define V4L2_TUNER_CAP_RDS		0x0080
-#define V4L2_TUNER_CAP_RDS_BLOCK_IO	0x0100
-#define V4L2_TUNER_CAP_RDS_CONTROLS	0x0200
-#define V4L2_TUNER_CAP_FREQ_BANDS	0x0400
-#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM	0x0800
-
-/*  Flags for the 'rxsubchans' field */
-#define V4L2_TUNER_SUB_MONO		0x0001
-#define V4L2_TUNER_SUB_STEREO		0x0002
-#define V4L2_TUNER_SUB_LANG2		0x0004
-#define V4L2_TUNER_SUB_SAP		0x0004
-#define V4L2_TUNER_SUB_LANG1		0x0008
-#define V4L2_TUNER_SUB_RDS		0x0010
-
-/*  Values for the 'audmode' field */
-#define V4L2_TUNER_MODE_MONO		0x0000
-#define V4L2_TUNER_MODE_STEREO		0x0001
-#define V4L2_TUNER_MODE_LANG2		0x0002
-#define V4L2_TUNER_MODE_SAP		0x0002
-#define V4L2_TUNER_MODE_LANG1		0x0003
-#define V4L2_TUNER_MODE_LANG1_LANG2	0x0004
-
-struct v4l2_frequency {
-	__u32	tuner;
-	__u32	type;	/* enum v4l2_tuner_type */
-	__u32	frequency;
-	__u32	reserved[8];
-};
-
-#define V4L2_BAND_MODULATION_VSB	(1 << 1)
-#define V4L2_BAND_MODULATION_FM		(1 << 2)
-#define V4L2_BAND_MODULATION_AM		(1 << 3)
-
-struct v4l2_frequency_band {
-	__u32	tuner;
-	__u32	type;	/* enum v4l2_tuner_type */
-	__u32	index;
-	__u32	capability;
-	__u32	rangelow;
-	__u32	rangehigh;
-	__u32	modulation;
-	__u32	reserved[9];
-};
-
-struct v4l2_hw_freq_seek {
-	__u32	tuner;
-	__u32	type;	/* enum v4l2_tuner_type */
-	__u32	seek_upward;
-	__u32	wrap_around;
-	__u32	spacing;
-	__u32	rangelow;
-	__u32	rangehigh;
-	__u32	reserved[5];
-};
-
-/*
- *	R D S
- */
-
-struct v4l2_rds_data {
-	__u8 	lsb;
-	__u8 	msb;
-	__u8 	block;
-} __attribute__ ((packed));
-
-#define V4L2_RDS_BLOCK_MSK 	 0x7
-#define V4L2_RDS_BLOCK_A 	 0
-#define V4L2_RDS_BLOCK_B 	 1
-#define V4L2_RDS_BLOCK_C 	 2
-#define V4L2_RDS_BLOCK_D 	 3
-#define V4L2_RDS_BLOCK_C_ALT 	 4
-#define V4L2_RDS_BLOCK_INVALID 	 7
-
-#define V4L2_RDS_BLOCK_CORRECTED 0x40
-#define V4L2_RDS_BLOCK_ERROR 	 0x80
-
-/*
- *	A U D I O
- */
-struct v4l2_audio {
-	__u32	index;
-	__u8	name[32];
-	__u32	capability;
-	__u32	mode;
-	__u32	reserved[2];
-};
-
-/*  Flags for the 'capability' field */
-#define V4L2_AUDCAP_STEREO		0x00001
-#define V4L2_AUDCAP_AVL			0x00002
-
-/*  Flags for the 'mode' field */
-#define V4L2_AUDMODE_AVL		0x00001
-
-struct v4l2_audioout {
-	__u32	index;
-	__u8	name[32];
-	__u32	capability;
-	__u32	mode;
-	__u32	reserved[2];
-};
-
-/*
- *	M P E G   S E R V I C E S
- *
- *	NOTE: EXPERIMENTAL API
- */
-#if 1
-#define V4L2_ENC_IDX_FRAME_I    (0)
-#define V4L2_ENC_IDX_FRAME_P    (1)
-#define V4L2_ENC_IDX_FRAME_B    (2)
-#define V4L2_ENC_IDX_FRAME_MASK (0xf)
-
-struct v4l2_enc_idx_entry {
-	__u64 offset;
-	__u64 pts;
-	__u32 length;
-	__u32 flags;
-	__u32 reserved[2];
-};
-
-#define V4L2_ENC_IDX_ENTRIES (64)
-struct v4l2_enc_idx {
-	__u32 entries;
-	__u32 entries_cap;
-	__u32 reserved[4];
-	struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
-};
-
-
-#define V4L2_ENC_CMD_START      (0)
-#define V4L2_ENC_CMD_STOP       (1)
-#define V4L2_ENC_CMD_PAUSE      (2)
-#define V4L2_ENC_CMD_RESUME     (3)
-
-/* Flags for V4L2_ENC_CMD_STOP */
-#define V4L2_ENC_CMD_STOP_AT_GOP_END    (1 << 0)
-
-struct v4l2_encoder_cmd {
-	__u32 cmd;
-	__u32 flags;
-	union {
-		struct {
-			__u32 data[8];
-		} raw;
-	};
-};
-
-/* Decoder commands */
-#define V4L2_DEC_CMD_START       (0)
-#define V4L2_DEC_CMD_STOP        (1)
-#define V4L2_DEC_CMD_PAUSE       (2)
-#define V4L2_DEC_CMD_RESUME      (3)
-
-/* Flags for V4L2_DEC_CMD_START */
-#define V4L2_DEC_CMD_START_MUTE_AUDIO	(1 << 0)
-
-/* Flags for V4L2_DEC_CMD_PAUSE */
-#define V4L2_DEC_CMD_PAUSE_TO_BLACK	(1 << 0)
-
-/* Flags for V4L2_DEC_CMD_STOP */
-#define V4L2_DEC_CMD_STOP_TO_BLACK	(1 << 0)
-#define V4L2_DEC_CMD_STOP_IMMEDIATELY	(1 << 1)
-
-/* Play format requirements (returned by the driver): */
-
-/* The decoder has no special format requirements */
-#define V4L2_DEC_START_FMT_NONE		(0)
-/* The decoder requires full GOPs */
-#define V4L2_DEC_START_FMT_GOP		(1)
-
-/* The structure must be zeroed before use by the application
-   This ensures it can be extended safely in the future. */
-struct v4l2_decoder_cmd {
-	__u32 cmd;
-	__u32 flags;
-	union {
-		struct {
-			__u64 pts;
-		} stop;
-
-		struct {
-			/* 0 or 1000 specifies normal speed,
-			   1 specifies forward single stepping,
-			   -1 specifies backward single stepping,
-			   >1: playback at speed/1000 of the normal speed,
-			   <-1: reverse playback at (-speed/1000) of the normal speed. */
-			__s32 speed;
-			__u32 format;
-		} start;
-
-		struct {
-			__u32 data[16];
-		} raw;
-	};
-};
-#endif
-
-
-/*
- *	D A T A   S E R V I C E S   ( V B I )
- *
- *	Data services API by Michael Schimek
- */
-
-/* Raw VBI */
-struct v4l2_vbi_format {
-	__u32	sampling_rate;		/* in 1 Hz */
-	__u32	offset;
-	__u32	samples_per_line;
-	__u32	sample_format;		/* V4L2_PIX_FMT_* */
-	__s32	start[2];
-	__u32	count[2];
-	__u32	flags;			/* V4L2_VBI_* */
-	__u32	reserved[2];		/* must be zero */
-};
-
-/*  VBI flags  */
-#define V4L2_VBI_UNSYNC		(1 << 0)
-#define V4L2_VBI_INTERLACED	(1 << 1)
-
-/* Sliced VBI
- *
- *    This implements is a proposal V4L2 API to allow SLICED VBI
- * required for some hardware encoders. It should change without
- * notice in the definitive implementation.
- */
-
-struct v4l2_sliced_vbi_format {
-	__u16   service_set;
-	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
-	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
-				 (equals frame lines 313-336 for 625 line video
-				  standards, 263-286 for 525 line standards) */
-	__u16   service_lines[2][24];
-	__u32   io_size;
-	__u32   reserved[2];            /* must be zero */
-};
-
-/* Teletext World System Teletext
-   (WST), defined on ITU-R BT.653-2 */
-#define V4L2_SLICED_TELETEXT_B          (0x0001)
-/* Video Program System, defined on ETS 300 231*/
-#define V4L2_SLICED_VPS                 (0x0400)
-/* Closed Caption, defined on EIA-608 */
-#define V4L2_SLICED_CAPTION_525         (0x1000)
-/* Wide Screen System, defined on ITU-R BT1119.1 */
-#define V4L2_SLICED_WSS_625             (0x4000)
-
-#define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
-#define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
-
-struct v4l2_sliced_vbi_cap {
-	__u16   service_set;
-	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
-	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
-				 (equals frame lines 313-336 for 625 line video
-				  standards, 263-286 for 525 line standards) */
-	__u16   service_lines[2][24];
-	__u32	type;		/* enum v4l2_buf_type */
-	__u32   reserved[3];    /* must be 0 */
-};
-
-struct v4l2_sliced_vbi_data {
-	__u32   id;
-	__u32   field;          /* 0: first field, 1: second field */
-	__u32   line;           /* 1-23 */
-	__u32   reserved;       /* must be 0 */
-	__u8    data[48];
-};
-
-/*
- * Sliced VBI data inserted into MPEG Streams
- */
-
-/*
- * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
- *
- * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
- * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
- * data
- *
- * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
- * definitions are not included here.  See the MPEG-2 specifications for details
- * on these headers.
- */
-
-/* Line type IDs */
-#define V4L2_MPEG_VBI_IVTV_TELETEXT_B     (1)
-#define V4L2_MPEG_VBI_IVTV_CAPTION_525    (4)
-#define V4L2_MPEG_VBI_IVTV_WSS_625        (5)
-#define V4L2_MPEG_VBI_IVTV_VPS            (7)
-
-struct v4l2_mpeg_vbi_itv0_line {
-	__u8 id;	/* One of V4L2_MPEG_VBI_IVTV_* above */
-	__u8 data[42];	/* Sliced VBI data for the line */
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_itv0 {
-	__le32 linemask[2]; /* Bitmasks of VBI service lines present */
-	struct v4l2_mpeg_vbi_itv0_line line[35];
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_ITV0 {
-	struct v4l2_mpeg_vbi_itv0_line line[36];
-} __attribute__ ((packed));
-
-#define V4L2_MPEG_VBI_IVTV_MAGIC0	"itv0"
-#define V4L2_MPEG_VBI_IVTV_MAGIC1	"ITV0"
-
-struct v4l2_mpeg_vbi_fmt_ivtv {
-	__u8 magic[4];
-	union {
-		struct v4l2_mpeg_vbi_itv0 itv0;
-		struct v4l2_mpeg_vbi_ITV0 ITV0;
-	};
-} __attribute__ ((packed));
-
-/*
- *	A G G R E G A T E   S T R U C T U R E S
- */
-
-/**
- * struct v4l2_plane_pix_format - additional, per-plane format definition
- * @sizeimage:		maximum size in bytes required for data, for which
- *			this plane will be used
- * @bytesperline:	distance in bytes between the leftmost pixels in two
- *			adjacent lines
- */
-struct v4l2_plane_pix_format {
-	__u32		sizeimage;
-	__u16		bytesperline;
-	__u16		reserved[7];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_pix_format_mplane - multiplanar format definition
- * @width:		image width in pixels
- * @height:		image height in pixels
- * @pixelformat:	little endian four character code (fourcc)
- * @field:		enum v4l2_field; field order (for interlaced video)
- * @colorspace:		enum v4l2_colorspace; supplemental to pixelformat
- * @plane_fmt:		per-plane information
- * @num_planes:		number of planes for this format
- */
-struct v4l2_pix_format_mplane {
-	__u32				width;
-	__u32				height;
-	__u32				pixelformat;
-	__u32				field;
-	__u32				colorspace;
-
-	struct v4l2_plane_pix_format	plane_fmt[VIDEO_MAX_PLANES];
-	__u8				num_planes;
-	__u8				reserved[11];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_format - stream data format
- * @type:	enum v4l2_buf_type; type of the data stream
- * @pix:	definition of an image format
- * @pix_mp:	definition of a multiplanar image format
- * @win:	definition of an overlaid image
- * @vbi:	raw VBI capture or output parameters
- * @sliced:	sliced VBI capture or output parameters
- * @raw_data:	placeholder for future extensions and custom formats
- */
-struct v4l2_format {
-	__u32	 type;
-	union {
-		struct v4l2_pix_format		pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
-		struct v4l2_pix_format_mplane	pix_mp;  /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
-		struct v4l2_window		win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
-		struct v4l2_vbi_format		vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
-		struct v4l2_sliced_vbi_format	sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
-		__u8	raw_data[200];                   /* user-defined */
-	} fmt;
-};
-
-/*	Stream type-dependent parameters
- */
-struct v4l2_streamparm {
-	__u32	 type;			/* enum v4l2_buf_type */
-	union {
-		struct v4l2_captureparm	capture;
-		struct v4l2_outputparm	output;
-		__u8	raw_data[200];  /* user-defined */
-	} parm;
-};
-
-/*
- *	E V E N T S
- */
-
-#define V4L2_EVENT_ALL				0
-#define V4L2_EVENT_VSYNC			1
-#define V4L2_EVENT_EOS				2
-#define V4L2_EVENT_CTRL				3
-#define V4L2_EVENT_FRAME_SYNC			4
-#define V4L2_EVENT_PRIVATE_START		0x08000000
-
-/* Payload for V4L2_EVENT_VSYNC */
-struct v4l2_event_vsync {
-	/* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
-	__u8 field;
-} __attribute__ ((packed));
-
-/* Payload for V4L2_EVENT_CTRL */
-#define V4L2_EVENT_CTRL_CH_VALUE		(1 << 0)
-#define V4L2_EVENT_CTRL_CH_FLAGS		(1 << 1)
-
-struct v4l2_event_ctrl {
-	__u32 changes;
-	__u32 type;
-	union {
-		__s32 value;
-		__s64 value64;
-	};
-	__u32 flags;
-	__s32 minimum;
-	__s32 maximum;
-	__s32 step;
-	__s32 default_value;
-};
-
-struct v4l2_event_frame_sync {
-	__u32 frame_sequence;
-};
-
-struct v4l2_event {
-	__u32				type;
-	union {
-		struct v4l2_event_vsync		vsync;
-		struct v4l2_event_ctrl		ctrl;
-		struct v4l2_event_frame_sync	frame_sync;
-		__u8				data[64];
-	} u;
-	__u32				pending;
-	__u32				sequence;
-	struct timespec			timestamp;
-	__u32				id;
-	__u32				reserved[8];
-};
-
-#define V4L2_EVENT_SUB_FL_SEND_INITIAL		(1 << 0)
-#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK	(1 << 1)
-
-struct v4l2_event_subscription {
-	__u32				type;
-	__u32				id;
-	__u32				flags;
-	__u32				reserved[5];
-};
-
-/*
- *	A D V A N C E D   D E B U G G I N G
- *
- *	NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
- *	FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
- */
-
-/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
-
-#define V4L2_CHIP_MATCH_HOST       0  /* Match against chip ID on host (0 for the host) */
-#define V4L2_CHIP_MATCH_I2C_DRIVER 1  /* Match against I2C driver name */
-#define V4L2_CHIP_MATCH_I2C_ADDR   2  /* Match against I2C 7-bit address */
-#define V4L2_CHIP_MATCH_AC97       3  /* Match against anciliary AC97 chip */
-
-struct v4l2_dbg_match {
-	__u32 type; /* Match type */
-	union {     /* Match this chip, meaning determined by type */
-		__u32 addr;
-		char name[32];
-	};
-} __attribute__ ((packed));
-
-struct v4l2_dbg_register {
-	struct v4l2_dbg_match match;
-	__u32 size;	/* register size in bytes */
-	__u64 reg;
-	__u64 val;
-} __attribute__ ((packed));
-
-/* VIDIOC_DBG_G_CHIP_IDENT */
-struct v4l2_dbg_chip_ident {
-	struct v4l2_dbg_match match;
-	__u32 ident;       /* chip identifier as specified in <media/v4l2-chip-ident.h> */
-	__u32 revision;    /* chip revision, chip specific */
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
- * @index:	on return, index of the first created buffer
- * @count:	entry: number of requested buffers,
- *		return: number of created buffers
- * @memory:	enum v4l2_memory; buffer memory type
- * @format:	frame format, for which buffers are requested
- * @reserved:	future extensions
- */
-struct v4l2_create_buffers {
-	__u32			index;
-	__u32			count;
-	__u32			memory;
-	struct v4l2_format	format;
-	__u32			reserved[8];
-};
-
-/*
- *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
- *
- */
-#define VIDIOC_QUERYCAP		 _IOR('V',  0, struct v4l2_capability)
-#define VIDIOC_RESERVED		  _IO('V',  1)
-#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct v4l2_fmtdesc)
-#define VIDIOC_G_FMT		_IOWR('V',  4, struct v4l2_format)
-#define VIDIOC_S_FMT		_IOWR('V',  5, struct v4l2_format)
-#define VIDIOC_REQBUFS		_IOWR('V',  8, struct v4l2_requestbuffers)
-#define VIDIOC_QUERYBUF		_IOWR('V',  9, struct v4l2_buffer)
-#define VIDIOC_G_FBUF		 _IOR('V', 10, struct v4l2_framebuffer)
-#define VIDIOC_S_FBUF		 _IOW('V', 11, struct v4l2_framebuffer)
-#define VIDIOC_OVERLAY		 _IOW('V', 14, int)
-#define VIDIOC_QBUF		_IOWR('V', 15, struct v4l2_buffer)
-#define VIDIOC_DQBUF		_IOWR('V', 17, struct v4l2_buffer)
-#define VIDIOC_STREAMON		 _IOW('V', 18, int)
-#define VIDIOC_STREAMOFF	 _IOW('V', 19, int)
-#define VIDIOC_G_PARM		_IOWR('V', 21, struct v4l2_streamparm)
-#define VIDIOC_S_PARM		_IOWR('V', 22, struct v4l2_streamparm)
-#define VIDIOC_G_STD		 _IOR('V', 23, v4l2_std_id)
-#define VIDIOC_S_STD		 _IOW('V', 24, v4l2_std_id)
-#define VIDIOC_ENUMSTD		_IOWR('V', 25, struct v4l2_standard)
-#define VIDIOC_ENUMINPUT	_IOWR('V', 26, struct v4l2_input)
-#define VIDIOC_G_CTRL		_IOWR('V', 27, struct v4l2_control)
-#define VIDIOC_S_CTRL		_IOWR('V', 28, struct v4l2_control)
-#define VIDIOC_G_TUNER		_IOWR('V', 29, struct v4l2_tuner)
-#define VIDIOC_S_TUNER		 _IOW('V', 30, struct v4l2_tuner)
-#define VIDIOC_G_AUDIO		 _IOR('V', 33, struct v4l2_audio)
-#define VIDIOC_S_AUDIO		 _IOW('V', 34, struct v4l2_audio)
-#define VIDIOC_QUERYCTRL	_IOWR('V', 36, struct v4l2_queryctrl)
-#define VIDIOC_QUERYMENU	_IOWR('V', 37, struct v4l2_querymenu)
-#define VIDIOC_G_INPUT		 _IOR('V', 38, int)
-#define VIDIOC_S_INPUT		_IOWR('V', 39, int)
-#define VIDIOC_G_OUTPUT		 _IOR('V', 46, int)
-#define VIDIOC_S_OUTPUT		_IOWR('V', 47, int)
-#define VIDIOC_ENUMOUTPUT	_IOWR('V', 48, struct v4l2_output)
-#define VIDIOC_G_AUDOUT		 _IOR('V', 49, struct v4l2_audioout)
-#define VIDIOC_S_AUDOUT		 _IOW('V', 50, struct v4l2_audioout)
-#define VIDIOC_G_MODULATOR	_IOWR('V', 54, struct v4l2_modulator)
-#define VIDIOC_S_MODULATOR	 _IOW('V', 55, struct v4l2_modulator)
-#define VIDIOC_G_FREQUENCY	_IOWR('V', 56, struct v4l2_frequency)
-#define VIDIOC_S_FREQUENCY	 _IOW('V', 57, struct v4l2_frequency)
-#define VIDIOC_CROPCAP		_IOWR('V', 58, struct v4l2_cropcap)
-#define VIDIOC_G_CROP		_IOWR('V', 59, struct v4l2_crop)
-#define VIDIOC_S_CROP		 _IOW('V', 60, struct v4l2_crop)
-#define VIDIOC_G_JPEGCOMP	 _IOR('V', 61, struct v4l2_jpegcompression)
-#define VIDIOC_S_JPEGCOMP	 _IOW('V', 62, struct v4l2_jpegcompression)
-#define VIDIOC_QUERYSTD      	 _IOR('V', 63, v4l2_std_id)
-#define VIDIOC_TRY_FMT      	_IOWR('V', 64, struct v4l2_format)
-#define VIDIOC_ENUMAUDIO	_IOWR('V', 65, struct v4l2_audio)
-#define VIDIOC_ENUMAUDOUT	_IOWR('V', 66, struct v4l2_audioout)
-#define VIDIOC_G_PRIORITY	 _IOR('V', 67, __u32) /* enum v4l2_priority */
-#define VIDIOC_S_PRIORITY	 _IOW('V', 68, __u32) /* enum v4l2_priority */
-#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
-#define VIDIOC_LOG_STATUS         _IO('V', 70)
-#define VIDIOC_G_EXT_CTRLS	_IOWR('V', 71, struct v4l2_ext_controls)
-#define VIDIOC_S_EXT_CTRLS	_IOWR('V', 72, struct v4l2_ext_controls)
-#define VIDIOC_TRY_EXT_CTRLS	_IOWR('V', 73, struct v4l2_ext_controls)
-#if 1
-#define VIDIOC_ENUM_FRAMESIZES	_IOWR('V', 74, struct v4l2_frmsizeenum)
-#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
-#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct v4l2_enc_idx)
-#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct v4l2_encoder_cmd)
-#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct v4l2_encoder_cmd)
-#endif
-
-#if 1
-/* Experimental, meant for debugging, testing and internal use.
-   Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
-   You must be root to use these ioctls. Never use these in applications! */
-#define	VIDIOC_DBG_S_REGISTER 	 _IOW('V', 79, struct v4l2_dbg_register)
-#define	VIDIOC_DBG_G_REGISTER 	_IOWR('V', 80, struct v4l2_dbg_register)
-
-/* Experimental, meant for debugging, testing and internal use.
-   Never use this ioctl in applications! */
-#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident)
-#endif
-
-#define VIDIOC_S_HW_FREQ_SEEK	 _IOW('V', 82, struct v4l2_hw_freq_seek)
-
-/* These four DV Preset ioctls are deprecated in favor of the DV Timings
-   ioctls. */
-#define	VIDIOC_ENUM_DV_PRESETS	_IOWR('V', 83, struct v4l2_dv_enum_preset)
-#define	VIDIOC_S_DV_PRESET	_IOWR('V', 84, struct v4l2_dv_preset)
-#define	VIDIOC_G_DV_PRESET	_IOWR('V', 85, struct v4l2_dv_preset)
-#define	VIDIOC_QUERY_DV_PRESET	_IOR('V',  86, struct v4l2_dv_preset)
-#define	VIDIOC_S_DV_TIMINGS	_IOWR('V', 87, struct v4l2_dv_timings)
-#define	VIDIOC_G_DV_TIMINGS	_IOWR('V', 88, struct v4l2_dv_timings)
-#define	VIDIOC_DQEVENT		 _IOR('V', 89, struct v4l2_event)
-#define	VIDIOC_SUBSCRIBE_EVENT	 _IOW('V', 90, struct v4l2_event_subscription)
-#define	VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
-
-/* Experimental, the below two ioctls may change over the next couple of kernel
-   versions */
-#define VIDIOC_CREATE_BUFS	_IOWR('V', 92, struct v4l2_create_buffers)
-#define VIDIOC_PREPARE_BUF	_IOWR('V', 93, struct v4l2_buffer)
-
-/* Experimental selection API */
-#define VIDIOC_G_SELECTION	_IOWR('V', 94, struct v4l2_selection)
-#define VIDIOC_S_SELECTION	_IOWR('V', 95, struct v4l2_selection)
-
-/* Experimental, these two ioctls may change over the next couple of kernel
-   versions. */
-#define VIDIOC_DECODER_CMD	_IOWR('V', 96, struct v4l2_decoder_cmd)
-#define VIDIOC_TRY_DECODER_CMD	_IOWR('V', 97, struct v4l2_decoder_cmd)
-
-/* Experimental, these three ioctls may change over the next couple of kernel
-   versions. */
-#define VIDIOC_ENUM_DV_TIMINGS  _IOWR('V', 98, struct v4l2_enum_dv_timings)
-#define VIDIOC_QUERY_DV_TIMINGS  _IOR('V', 99, struct v4l2_dv_timings)
-#define VIDIOC_DV_TIMINGS_CAP   _IOWR('V', 100, struct v4l2_dv_timings_cap)
-
-/* Experimental, this ioctl may change over the next couple of kernel
-   versions. */
-#define VIDIOC_ENUM_FREQ_BANDS	_IOWR('V', 101, struct v4l2_frequency_band)
-
-/* Reminder: when adding new ioctls please add support for them to
-   drivers/media/video/v4l2-compat-ioctl32.c as well! */
-
-#define BASE_VIDIOC_PRIVATE	192		/* 192-255 are private */
+#include <uapi/linux/videodev2.h>
 
 #endif /* __LINUX_VIDEODEV2_H */
diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h
deleted file mode 100644
index 277c4ad44e84..000000000000
--- a/include/linux/virtio_9p.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _LINUX_VIRTIO_9P_H
-#define _LINUX_VIRTIO_9P_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-/* The feature bitmap for virtio 9P */
-
-/* The mount point is specified in a config variable */
-#define VIRTIO_9P_MOUNT_TAG 0
-
-struct virtio_9p_config {
-	/* length of the tag name */
-	__u16 tag_len;
-	/* non-NULL terminated tag name */
-	__u8 tag[0];
-} __attribute__((packed));
-
-#endif /* _LINUX_VIRTIO_9P_H */
diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h
deleted file mode 100644
index 652dc8bea921..000000000000
--- a/include/linux/virtio_balloon.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _LINUX_VIRTIO_BALLOON_H
-#define _LINUX_VIRTIO_BALLOON_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-/* The feature bitmap for virtio balloon */
-#define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
-#define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
-
-/* Size of a PFN in the balloon interface. */
-#define VIRTIO_BALLOON_PFN_SHIFT 12
-
-struct virtio_balloon_config
-{
-	/* Number of pages host wants Guest to give up. */
-	__le32 num_pages;
-	/* Number of pages we've actually got in balloon. */
-	__le32 actual;
-};
-
-#define VIRTIO_BALLOON_S_SWAP_IN  0   /* Amount of memory swapped in */
-#define VIRTIO_BALLOON_S_SWAP_OUT 1   /* Amount of memory swapped out */
-#define VIRTIO_BALLOON_S_MAJFLT   2   /* Number of major faults */
-#define VIRTIO_BALLOON_S_MINFLT   3   /* Number of minor faults */
-#define VIRTIO_BALLOON_S_MEMFREE  4   /* Total amount of free memory */
-#define VIRTIO_BALLOON_S_MEMTOT   5   /* Total amount of memory */
-#define VIRTIO_BALLOON_S_NR       6
-
-struct virtio_balloon_stat {
-	u16 tag;
-	u64 val;
-} __attribute__((packed));
-
-#endif /* _LINUX_VIRTIO_BALLOON_H */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
deleted file mode 100644
index 6d8e61c48563..000000000000
--- a/include/linux/virtio_blk.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef _LINUX_VIRTIO_BLK_H
-#define _LINUX_VIRTIO_BLK_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-/* Feature bits */
-#define VIRTIO_BLK_F_BARRIER	0	/* Does host support barriers? */
-#define VIRTIO_BLK_F_SIZE_MAX	1	/* Indicates maximum segment size */
-#define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
-#define VIRTIO_BLK_F_GEOMETRY	4	/* Legacy geometry available  */
-#define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
-#define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
-#define VIRTIO_BLK_F_SCSI	7	/* Supports scsi command passthru */
-#define VIRTIO_BLK_F_WCE	9	/* Writeback mode enabled after reset */
-#define VIRTIO_BLK_F_TOPOLOGY	10	/* Topology information is available */
-#define VIRTIO_BLK_F_CONFIG_WCE	11	/* Writeback mode available in config */
-
-#ifndef __KERNEL__
-/* Old (deprecated) name for VIRTIO_BLK_F_WCE. */
-#define VIRTIO_BLK_F_FLUSH VIRTIO_BLK_F_WCE
-#endif
-
-#define VIRTIO_BLK_ID_BYTES	20	/* ID string length */
-
-struct virtio_blk_config {
-	/* The capacity (in 512-byte sectors). */
-	__u64 capacity;
-	/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
-	__u32 size_max;
-	/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
-	__u32 seg_max;
-	/* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
-	struct virtio_blk_geometry {
-		__u16 cylinders;
-		__u8 heads;
-		__u8 sectors;
-	} geometry;
-
-	/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
-	__u32 blk_size;
-
-	/* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY  */
-	/* exponent for physical block per logical block. */
-	__u8 physical_block_exp;
-	/* alignment offset in logical blocks. */
-	__u8 alignment_offset;
-	/* minimum I/O size without performance penalty in logical blocks. */
-	__u16 min_io_size;
-	/* optimal sustained I/O size in logical blocks. */
-	__u32 opt_io_size;
-
-	/* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */
-	__u8 wce;
-} __attribute__((packed));
-
-/*
- * Command types
- *
- * Usage is a bit tricky as some bits are used as flags and some are not.
- *
- * Rules:
- *   VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or
- *   VIRTIO_BLK_T_BARRIER.  VIRTIO_BLK_T_FLUSH is a command of its own
- *   and may not be combined with any of the other flags.
- */
-
-/* These two define direction. */
-#define VIRTIO_BLK_T_IN		0
-#define VIRTIO_BLK_T_OUT	1
-
-/* This bit says it's a scsi command, not an actual read or write. */
-#define VIRTIO_BLK_T_SCSI_CMD	2
-
-/* Cache flush command */
-#define VIRTIO_BLK_T_FLUSH	4
-
-/* Get device ID command */
-#define VIRTIO_BLK_T_GET_ID    8
-
-/* Barrier before this op. */
-#define VIRTIO_BLK_T_BARRIER	0x80000000
-
-/* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr {
-	/* VIRTIO_BLK_T* */
-	__u32 type;
-	/* io priority. */
-	__u32 ioprio;
-	/* Sector (ie. 512 byte offset) */
-	__u64 sector;
-};
-
-struct virtio_scsi_inhdr {
-	__u32 errors;
-	__u32 data_len;
-	__u32 sense_len;
-	__u32 residual;
-};
-
-/* And this is the final byte of the write scatter-gather list. */
-#define VIRTIO_BLK_S_OK		0
-#define VIRTIO_BLK_S_IOERR	1
-#define VIRTIO_BLK_S_UNSUPP	2
-#endif /* _LINUX_VIRTIO_BLK_H */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index e2850a7ea276..29b9104232b4 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -1,60 +1,10 @@
 #ifndef _LINUX_VIRTIO_CONFIG_H
 #define _LINUX_VIRTIO_CONFIG_H
-/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-
-/* Virtio devices use a standardized configuration space to define their
- * features and pass configuration information, but each implementation can
- * store and access that space differently. */
-#include <linux/types.h>
-
-/* Status byte for guest to report progress, and synchronize features. */
-/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
-#define VIRTIO_CONFIG_S_ACKNOWLEDGE	1
-/* We have found a driver for the device. */
-#define VIRTIO_CONFIG_S_DRIVER		2
-/* Driver has used its parts of the config, and is happy */
-#define VIRTIO_CONFIG_S_DRIVER_OK	4
-/* We've given up on this device. */
-#define VIRTIO_CONFIG_S_FAILED		0x80
-
-/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
- * transport being used (eg. virtio_ring), the rest are per-device feature
- * bits. */
-#define VIRTIO_TRANSPORT_F_START	28
-#define VIRTIO_TRANSPORT_F_END		32
-
-/* Do we get callbacks when the ring is completely used, even if we've
- * suppressed them? */
-#define VIRTIO_F_NOTIFY_ON_EMPTY	24
 
-#ifdef __KERNEL__
 #include <linux/err.h>
 #include <linux/bug.h>
 #include <linux/virtio.h>
+#include <uapi/linux/virtio_config.h>
 
 /**
  * virtio_config_ops - operations for configuring a virtio device
@@ -213,5 +163,4 @@ int virtqueue_set_affinity(struct virtqueue *vq, int cpu)
 }
 
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index bdf4b0034739..d2e2785af602 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -1,8 +1,3 @@
-#ifndef _LINUX_VIRTIO_CONSOLE_H
-#define _LINUX_VIRTIO_CONSOLE_H
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
 /*
  * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
  * anyone can use the definitions to implement compatible drivers/servers:
@@ -34,44 +29,10 @@
  * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
  * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
  */
+#ifndef _LINUX_VIRTIO_CONSOLE_H
+#define _LINUX_VIRTIO_CONSOLE_H
 
-/* Feature bits */
-#define VIRTIO_CONSOLE_F_SIZE	0	/* Does host provide console size? */
-#define VIRTIO_CONSOLE_F_MULTIPORT 1	/* Does host provide multiple ports? */
-
-#define VIRTIO_CONSOLE_BAD_ID		(~(u32)0)
-
-struct virtio_console_config {
-	/* colums of the screens */
-	__u16 cols;
-	/* rows of the screens */
-	__u16 rows;
-	/* max. number of ports this device can hold */
-	__u32 max_nr_ports;
-} __attribute__((packed));
-
-/*
- * A message that's passed between the Host and the Guest for a
- * particular port.
- */
-struct virtio_console_control {
-	__u32 id;		/* Port number */
-	__u16 event;		/* The kind of control event (see below) */
-	__u16 value;		/* Extra information for the key */
-};
-
-/* Some events for control messages */
-#define VIRTIO_CONSOLE_DEVICE_READY	0
-#define VIRTIO_CONSOLE_PORT_ADD		1
-#define VIRTIO_CONSOLE_PORT_REMOVE	2
-#define VIRTIO_CONSOLE_PORT_READY	3
-#define VIRTIO_CONSOLE_CONSOLE_PORT	4
-#define VIRTIO_CONSOLE_RESIZE		5
-#define VIRTIO_CONSOLE_PORT_OPEN	6
-#define VIRTIO_CONSOLE_PORT_NAME	7
+#include <uapi/linux/virtio_console.h>
 
-#ifdef __KERNEL__
 int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_VIRTIO_CONSOLE_H */
diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h
deleted file mode 100644
index 270fb22c5811..000000000000
--- a/include/linux/virtio_ids.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _LINUX_VIRTIO_IDS_H
-#define _LINUX_VIRTIO_IDS_H
-/*
- * Virtio IDs
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-
-#define VIRTIO_ID_NET		1 /* virtio net */
-#define VIRTIO_ID_BLOCK		2 /* virtio block */
-#define VIRTIO_ID_CONSOLE	3 /* virtio console */
-#define VIRTIO_ID_RNG		4 /* virtio rng */
-#define VIRTIO_ID_BALLOON	5 /* virtio balloon */
-#define VIRTIO_ID_RPMSG		7 /* virtio remote processor messaging */
-#define VIRTIO_ID_SCSI		8 /* virtio scsi */
-#define VIRTIO_ID_9P		9 /* 9p virtio console */
-
-#endif /* _LINUX_VIRTIO_IDS_H */
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
deleted file mode 100644
index 2470f541af50..000000000000
--- a/include/linux/virtio_net.h
+++ /dev/null
@@ -1,169 +0,0 @@
-#ifndef _LINUX_VIRTIO_NET_H
-#define _LINUX_VIRTIO_NET_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-#include <linux/if_ether.h>
-
-/* The feature bitmap for virtio net */
-#define VIRTIO_NET_F_CSUM	0	/* Host handles pkts w/ partial csum */
-#define VIRTIO_NET_F_GUEST_CSUM	1	/* Guest handles pkts w/ partial csum */
-#define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
-#define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
-#define VIRTIO_NET_F_GUEST_TSO4	7	/* Guest can handle TSOv4 in. */
-#define VIRTIO_NET_F_GUEST_TSO6	8	/* Guest can handle TSOv6 in. */
-#define VIRTIO_NET_F_GUEST_ECN	9	/* Guest can handle TSO[6] w/ ECN in. */
-#define VIRTIO_NET_F_GUEST_UFO	10	/* Guest can handle UFO in. */
-#define VIRTIO_NET_F_HOST_TSO4	11	/* Host can handle TSOv4 in. */
-#define VIRTIO_NET_F_HOST_TSO6	12	/* Host can handle TSOv6 in. */
-#define VIRTIO_NET_F_HOST_ECN	13	/* Host can handle TSO[6] w/ ECN in. */
-#define VIRTIO_NET_F_HOST_UFO	14	/* Host can handle UFO in. */
-#define VIRTIO_NET_F_MRG_RXBUF	15	/* Host can merge receive buffers. */
-#define VIRTIO_NET_F_STATUS	16	/* virtio_net_config.status available */
-#define VIRTIO_NET_F_CTRL_VQ	17	/* Control channel available */
-#define VIRTIO_NET_F_CTRL_RX	18	/* Control channel RX mode support */
-#define VIRTIO_NET_F_CTRL_VLAN	19	/* Control channel VLAN filtering */
-#define VIRTIO_NET_F_CTRL_RX_EXTRA 20	/* Extra RX mode control support */
-#define VIRTIO_NET_F_GUEST_ANNOUNCE 21	/* Guest can announce device on the
-					 * network */
-
-#define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
-#define VIRTIO_NET_S_ANNOUNCE	2	/* Announcement is needed */
-
-struct virtio_net_config {
-	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
-	__u8 mac[6];
-	/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
-	__u16 status;
-} __attribute__((packed));
-
-/* This is the first element of the scatter-gather list.  If you don't
- * specify GSO or CSUM features, you can simply ignore the header. */
-struct virtio_net_hdr {
-#define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	// Use csum_start, csum_offset
-#define VIRTIO_NET_HDR_F_DATA_VALID	2	// Csum is valid
-	__u8 flags;
-#define VIRTIO_NET_HDR_GSO_NONE		0	// Not a GSO frame
-#define VIRTIO_NET_HDR_GSO_TCPV4	1	// GSO frame, IPv4 TCP (TSO)
-#define VIRTIO_NET_HDR_GSO_UDP		3	// GSO frame, IPv4 UDP (UFO)
-#define VIRTIO_NET_HDR_GSO_TCPV6	4	// GSO frame, IPv6 TCP
-#define VIRTIO_NET_HDR_GSO_ECN		0x80	// TCP has ECN set
-	__u8 gso_type;
-	__u16 hdr_len;		/* Ethernet + IP + tcp/udp hdrs */
-	__u16 gso_size;		/* Bytes to append to hdr_len per frame */
-	__u16 csum_start;	/* Position to start checksumming from */
-	__u16 csum_offset;	/* Offset after that to place checksum */
-};
-
-/* This is the version of the header to use when the MRG_RXBUF
- * feature has been negotiated. */
-struct virtio_net_hdr_mrg_rxbuf {
-	struct virtio_net_hdr hdr;
-	__u16 num_buffers;	/* Number of merged rx buffers */
-};
-
-/*
- * Control virtqueue data structures
- *
- * The control virtqueue expects a header in the first sg entry
- * and an ack/status response in the last entry.  Data for the
- * command goes in between.
- */
-struct virtio_net_ctrl_hdr {
-	__u8 class;
-	__u8 cmd;
-} __attribute__((packed));
-
-typedef __u8 virtio_net_ctrl_ack;
-
-#define VIRTIO_NET_OK     0
-#define VIRTIO_NET_ERR    1
-
-/*
- * Control the RX mode, ie. promisucous, allmulti, etc...
- * All commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable.  Commands
- * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
- * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
- */
-#define VIRTIO_NET_CTRL_RX    0
- #define VIRTIO_NET_CTRL_RX_PROMISC      0
- #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
- #define VIRTIO_NET_CTRL_RX_ALLUNI       2
- #define VIRTIO_NET_CTRL_RX_NOMULTI      3
- #define VIRTIO_NET_CTRL_RX_NOUNI        4
- #define VIRTIO_NET_CTRL_RX_NOBCAST      5
-
-/*
- * Control the MAC filter table.
- *
- * The MAC filter table is managed by the hypervisor, the guest should
- * assume the size is infinite.  Filtering should be considered
- * non-perfect, ie. based on hypervisor resources, the guest may
- * received packets from sources not specified in the filter list.
- *
- * In addition to the class/cmd header, the TABLE_SET command requires
- * two out scatterlists.  Each contains a 4 byte count of entries followed
- * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
- * first sg list contains unicast addresses, the second is for multicast.
- * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
- * is available.
- */
-struct virtio_net_ctrl_mac {
-	__u32 entries;
-	__u8 macs[][ETH_ALEN];
-} __attribute__((packed));
-
-#define VIRTIO_NET_CTRL_MAC    1
- #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
-
-/*
- * Control VLAN filtering
- *
- * The VLAN filter table is controlled via a simple ADD/DEL interface.
- * VLAN IDs not added may be filterd by the hypervisor.  Del is the
- * opposite of add.  Both commands expect an out entry containing a 2
- * byte VLAN ID.  VLAN filterting is available with the
- * VIRTIO_NET_F_CTRL_VLAN feature bit.
- */
-#define VIRTIO_NET_CTRL_VLAN       2
- #define VIRTIO_NET_CTRL_VLAN_ADD             0
- #define VIRTIO_NET_CTRL_VLAN_DEL             1
-
-/*
- * Control link announce acknowledgement
- *
- * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
- * driver has recevied the notification; device would clear the
- * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
- * this command.
- */
-#define VIRTIO_NET_CTRL_ANNOUNCE       3
- #define VIRTIO_NET_CTRL_ANNOUNCE_ACK         0
-
-#endif /* _LINUX_VIRTIO_NET_H */
diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h
deleted file mode 100644
index ea66f3f60d63..000000000000
--- a/include/linux/virtio_pci.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Virtio PCI driver
- *
- * This module allows virtio devices to be used over a virtual PCI device.
- * This can be used with QEMU based VMMs like KVM or Xen.
- *
- * Copyright IBM Corp. 2007
- *
- * Authors:
- *  Anthony Liguori  <aliguori@us.ibm.com>
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _LINUX_VIRTIO_PCI_H
-#define _LINUX_VIRTIO_PCI_H
-
-#include <linux/virtio_config.h>
-
-/* A 32-bit r/o bitmask of the features supported by the host */
-#define VIRTIO_PCI_HOST_FEATURES	0
-
-/* A 32-bit r/w bitmask of features activated by the guest */
-#define VIRTIO_PCI_GUEST_FEATURES	4
-
-/* A 32-bit r/w PFN for the currently selected queue */
-#define VIRTIO_PCI_QUEUE_PFN		8
-
-/* A 16-bit r/o queue size for the currently selected queue */
-#define VIRTIO_PCI_QUEUE_NUM		12
-
-/* A 16-bit r/w queue selector */
-#define VIRTIO_PCI_QUEUE_SEL		14
-
-/* A 16-bit r/w queue notifier */
-#define VIRTIO_PCI_QUEUE_NOTIFY		16
-
-/* An 8-bit device status register.  */
-#define VIRTIO_PCI_STATUS		18
-
-/* An 8-bit r/o interrupt status register.  Reading the value will return the
- * current contents of the ISR and will also clear it.  This is effectively
- * a read-and-acknowledge. */
-#define VIRTIO_PCI_ISR			19
-
-/* The bit of the ISR which indicates a device configuration change. */
-#define VIRTIO_PCI_ISR_CONFIG		0x2
-
-/* MSI-X registers: only enabled if MSI-X is enabled. */
-/* A 16-bit vector for configuration changes. */
-#define VIRTIO_MSI_CONFIG_VECTOR        20
-/* A 16-bit vector for selected queue notifications. */
-#define VIRTIO_MSI_QUEUE_VECTOR         22
-/* Vector value used to disable MSI for queue */
-#define VIRTIO_MSI_NO_VECTOR            0xffff
-
-/* The remaining space is defined by each driver as the per-driver
- * configuration space */
-#define VIRTIO_PCI_CONFIG(dev)		((dev)->msix_enabled ? 24 : 20)
-
-/* Virtio ABI version, this must match exactly */
-#define VIRTIO_PCI_ABI_VERSION		0
-
-/* How many bits to shift physical queue address written to QUEUE_PFN.
- * 12 is historical, and due to x86 page size. */
-#define VIRTIO_PCI_QUEUE_ADDR_SHIFT	12
-
-/* The alignment to use between consumer and producer parts of vring.
- * x86 pagesize again. */
-#define VIRTIO_PCI_VRING_ALIGN		4096
-#endif
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index c2d793a06ad7..63c6ea199519 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -1,167 +1,9 @@
 #ifndef _LINUX_VIRTIO_RING_H
 #define _LINUX_VIRTIO_RING_H
-/* An interface for efficient virtio implementation, currently for use by KVM
- * and lguest, but hopefully others soon.  Do NOT change this since it will
- * break existing servers and clients.
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Copyright Rusty Russell IBM Corporation 2007. */
-#include <linux/types.h>
 
-/* This marks a buffer as continuing via the next field. */
-#define VRING_DESC_F_NEXT	1
-/* This marks a buffer as write-only (otherwise read-only). */
-#define VRING_DESC_F_WRITE	2
-/* This means the buffer contains a list of buffer descriptors. */
-#define VRING_DESC_F_INDIRECT	4
-
-/* The Host uses this in used->flags to advise the Guest: don't kick me when
- * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
- * will still kick if it's out of buffers. */
-#define VRING_USED_F_NO_NOTIFY	1
-/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
- * when you consume a buffer.  It's unreliable, so it's simply an
- * optimization.  */
-#define VRING_AVAIL_F_NO_INTERRUPT	1
-
-/* We support indirect buffer descriptors */
-#define VIRTIO_RING_F_INDIRECT_DESC	28
-
-/* The Guest publishes the used index for which it expects an interrupt
- * at the end of the avail ring. Host should ignore the avail->flags field. */
-/* The Host publishes the avail index for which it expects a kick
- * at the end of the used ring. Guest should ignore the used->flags field. */
-#define VIRTIO_RING_F_EVENT_IDX		29
-
-/* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
-struct vring_desc {
-	/* Address (guest-physical). */
-	__u64 addr;
-	/* Length. */
-	__u32 len;
-	/* The flags as indicated above. */
-	__u16 flags;
-	/* We chain unused descriptors via this, too */
-	__u16 next;
-};
-
-struct vring_avail {
-	__u16 flags;
-	__u16 idx;
-	__u16 ring[];
-};
-
-/* u32 is used here for ids for padding reasons. */
-struct vring_used_elem {
-	/* Index of start of used descriptor chain. */
-	__u32 id;
-	/* Total length of the descriptor chain which was used (written to) */
-	__u32 len;
-};
-
-struct vring_used {
-	__u16 flags;
-	__u16 idx;
-	struct vring_used_elem ring[];
-};
-
-struct vring {
-	unsigned int num;
-
-	struct vring_desc *desc;
-
-	struct vring_avail *avail;
-
-	struct vring_used *used;
-};
-
-/* The standard layout for the ring is a continuous chunk of memory which looks
- * like this.  We assume num is a power of 2.
- *
- * struct vring
- * {
- *	// The actual descriptors (16 bytes each)
- *	struct vring_desc desc[num];
- *
- *	// A ring of available descriptor heads with free-running index.
- *	__u16 avail_flags;
- *	__u16 avail_idx;
- *	__u16 available[num];
- *	__u16 used_event_idx;
- *
- *	// Padding to the next align boundary.
- *	char pad[];
- *
- *	// A ring of used descriptor heads with free-running index.
- *	__u16 used_flags;
- *	__u16 used_idx;
- *	struct vring_used_elem used[num];
- *	__u16 avail_event_idx;
- * };
- */
-/* We publish the used event index at the end of the available ring, and vice
- * versa. They are at the end for backwards compatibility. */
-#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
-#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
-
-static inline void vring_init(struct vring *vr, unsigned int num, void *p,
-			      unsigned long align)
-{
-	vr->num = num;
-	vr->desc = p;
-	vr->avail = p + num*sizeof(struct vring_desc);
-	vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
-		+ align-1) & ~(align - 1));
-}
-
-static inline unsigned vring_size(unsigned int num, unsigned long align)
-{
-	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
-		 + align - 1) & ~(align - 1))
-		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
-}
-
-/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
-/* Assuming a given event_idx value from the other size, if
- * we have just incremented index from old to new_idx,
- * should we trigger an event? */
-static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
-{
-	/* Note: Xen has similar logic for notification hold-off
-	 * in include/xen/interface/io/ring.h with req_event and req_prod
-	 * corresponding to event_idx + 1 and new_idx respectively.
-	 * Note also that req_event and req_prod in Xen start at 1,
-	 * event indexes in virtio start at 0. */
-	return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
-}
-
-#ifdef __KERNEL__
 #include <linux/irqreturn.h>
+#include <uapi/linux/virtio_ring.h>
+
 struct virtio_device;
 struct virtqueue;
 
@@ -179,5 +21,4 @@ void vring_del_virtqueue(struct virtqueue *vq);
 void vring_transport_features(struct virtio_device *vdev);
 
 irqreturn_t vring_interrupt(int irq, void *_vq);
-#endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_RING_H */
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
deleted file mode 100644
index c4d5de896f0c..000000000000
--- a/include/linux/virtio_rng.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _LINUX_VIRTIO_RNG_H
-#define _LINUX_VIRTIO_RNG_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers. */
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-#endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/include/linux/vt.h b/include/linux/vt.h
index 30a8dd9c83ff..b186e0435239 100644
--- a/include/linux/vt.h
+++ b/include/linux/vt.h
@@ -1,90 +1,8 @@
 #ifndef _LINUX_VT_H
 #define _LINUX_VT_H
 
+#include <uapi/linux/vt.h>
 
-/*
- * These constants are also useful for user-level apps (e.g., VC
- * resizing).
- */
-#define MIN_NR_CONSOLES 1       /* must be at least 1 */
-#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
-#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
-		/* Note: the ioctl VT_GETSTATE does not work for
-		   consoles 16 and higher (since it returns a short) */
-
-/* 0x56 is 'V', to avoid collision with termios and kd */
-
-#define VT_OPENQRY	0x5600	/* find available vt */
-
-struct vt_mode {
-	char mode;		/* vt mode */
-	char waitv;		/* if set, hang on writes if not active */
-	short relsig;		/* signal to raise on release req */
-	short acqsig;		/* signal to raise on acquisition */
-	short frsig;		/* unused (set to 0) */
-};
-#define VT_GETMODE	0x5601	/* get mode of active vt */
-#define VT_SETMODE	0x5602	/* set mode of active vt */
-#define		VT_AUTO		0x00	/* auto vt switching */
-#define		VT_PROCESS	0x01	/* process controls switching */
-#define		VT_ACKACQ	0x02	/* acknowledge switch */
-
-struct vt_stat {
-	unsigned short v_active;	/* active vt */
-	unsigned short v_signal;	/* signal to send */
-	unsigned short v_state;		/* vt bitmask */
-};
-#define VT_GETSTATE	0x5603	/* get global vt state info */
-#define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
-
-#define VT_RELDISP	0x5605	/* release display */
-
-#define VT_ACTIVATE	0x5606	/* make vt active */
-#define VT_WAITACTIVE	0x5607	/* wait for vt active */
-#define VT_DISALLOCATE	0x5608  /* free memory associated to vt */
-
-struct vt_sizes {
-	unsigned short v_rows;		/* number of rows */
-	unsigned short v_cols;		/* number of columns */
-	unsigned short v_scrollsize;	/* number of lines of scrollback */
-};
-#define VT_RESIZE	0x5609	/* set kernel's idea of screensize */
-
-struct vt_consize {
-	unsigned short v_rows;	/* number of rows */
-	unsigned short v_cols;	/* number of columns */
-	unsigned short v_vlin;	/* number of pixel rows on screen */
-	unsigned short v_clin;	/* number of pixel rows per character */
-	unsigned short v_vcol;	/* number of pixel columns on screen */
-	unsigned short v_ccol;	/* number of pixel columns per character */
-};
-#define VT_RESIZEX      0x560A  /* set kernel's idea of screensize + more */
-#define VT_LOCKSWITCH   0x560B  /* disallow vt switching */
-#define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
-#define VT_GETHIFONTMASK 0x560D  /* return hi font mask */
-
-struct vt_event {
-	unsigned int event;
-#define VT_EVENT_SWITCH		0x0001	/* Console switch */
-#define VT_EVENT_BLANK		0x0002	/* Screen blank */
-#define VT_EVENT_UNBLANK	0x0004	/* Screen unblank */
-#define VT_EVENT_RESIZE		0x0008	/* Resize display */
-#define VT_MAX_EVENT		0x000F
-	unsigned int oldev;		/* Old console */
-	unsigned int newev;		/* New console (if changing) */
-	unsigned int pad[4];		/* Padding for expansion */
-};
-
-#define VT_WAITEVENT	0x560E	/* Wait for an event */
-
-struct vt_setactivate {
-	unsigned int console;
-	struct vt_mode mode;
-};
-
-#define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
-
-#ifdef __KERNEL__
 
 /* Virtual Terminal events. */
 #define VT_ALLOCATE		0x0001 /* Console got allocated */
@@ -106,8 +24,4 @@ static inline int vt_kmsg_redirect(int new)
 
 #endif
 
-#endif /* __KERNEL__ */
-
-#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
-
 #endif /* _LINUX_VT_H */
diff --git a/include/linux/wait.h b/include/linux/wait.h
index 1dee81c41ff1..168dfe122dd3 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -1,28 +1,12 @@
 #ifndef _LINUX_WAIT_H
 #define _LINUX_WAIT_H
 
-#define WNOHANG		0x00000001
-#define WUNTRACED	0x00000002
-#define WSTOPPED	WUNTRACED
-#define WEXITED		0x00000004
-#define WCONTINUED	0x00000008
-#define WNOWAIT		0x01000000	/* Don't reap, just poll status.  */
-
-#define __WNOTHREAD	0x20000000	/* Don't wait on children of other threads in this group */
-#define __WALL		0x40000000	/* Wait on all children, regardless of type */
-#define __WCLONE	0x80000000	/* Wait only on non-SIGCHLD children */
-
-/* First argument to waitid: */
-#define P_ALL		0
-#define P_PID		1
-#define P_PGID		2
-
-#ifdef __KERNEL__
 
 #include <linux/list.h>
 #include <linux/stddef.h>
 #include <linux/spinlock.h>
 #include <asm/current.h>
+#include <uapi/linux/wait.h>
 
 typedef struct __wait_queue wait_queue_t;
 typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key);
@@ -663,6 +647,4 @@ static inline int wait_on_bit_lock(void *word, int bit,
 	return out_of_line_wait_on_bit_lock(word, bit, action, mode);
 }
 	
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h
index 3157cc1fada6..cec4b4159767 100644
--- a/include/linux/wanrouter.h
+++ b/include/linux/wanrouter.h
@@ -43,413 +43,11 @@
 * Jan 16, 1997	Gene Kozin	router_devlist made public
 * Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
 *****************************************************************************/
-
 #ifndef	_ROUTER_H
 #define	_ROUTER_H
 
-#define	ROUTER_NAME	"wanrouter"	/* in case we ever change it */
-#define	ROUTER_VERSION	1		/* version number */
-#define	ROUTER_RELEASE	1		/* release (minor version) number */
-#define	ROUTER_IOCTL	'W'		/* for IOCTL calls */
-#define	ROUTER_MAGIC	0x524D4157L	/* signature: 'WANR' reversed */
-
-/* IOCTL codes for /proc/router/<device> entries (up to 255) */
-enum router_ioctls
-{
-	ROUTER_SETUP	= ROUTER_IOCTL<<8,	/* configure device */
-	ROUTER_DOWN,				/* shut down device */
-	ROUTER_STAT,				/* get device status */
-	ROUTER_IFNEW,				/* add interface */
-	ROUTER_IFDEL,				/* delete interface */
-	ROUTER_IFSTAT,				/* get interface status */
-	ROUTER_USER	= (ROUTER_IOCTL<<8)+16,	/* driver-specific calls */
-	ROUTER_USER_MAX	= (ROUTER_IOCTL<<8)+31
-};
-
-/* identifiers for displaying proc file data for dual port adapters */
-#define PROC_DATA_PORT_0 0x8000	/* the data is for port 0 */
-#define PROC_DATA_PORT_1 0x8001	/* the data is for port 1 */
-
-/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
-#define	NLPID_IP	0xCC	/* Internet Protocol Datagram */
-#define	NLPID_SNAP	0x80	/* IEEE Subnetwork Access Protocol */
-#define	NLPID_CLNP	0x81	/* ISO/IEC 8473 */
-#define	NLPID_ESIS	0x82	/* ISO/IEC 9542 */
-#define	NLPID_ISIS	0x83	/* ISO/IEC ISIS */
-#define	NLPID_Q933	0x08	/* CCITT Q.933 */
-
-/* Miscellaneous */
-#define	WAN_IFNAME_SZ	15	/* max length of the interface name */
-#define	WAN_DRVNAME_SZ	15	/* max length of the link driver name */
-#define	WAN_ADDRESS_SZ	31	/* max length of the WAN media address */
-#define USED_BY_FIELD	8	/* max length of the used by field */
-
-/* Defines for UDP PACKET TYPE */
-#define UDP_PTPIPE_TYPE 	0x01
-#define UDP_FPIPE_TYPE		0x02
-#define UDP_CPIPE_TYPE		0x03
-#define UDP_DRVSTATS_TYPE 	0x04
-#define UDP_INVALID_TYPE  	0x05
-
-/* Command return code */
-#define CMD_OK		0		/* normal firmware return code */
-#define CMD_TIMEOUT	0xFF		/* firmware command timed out */
-
-/* UDP Packet Management */
-#define UDP_PKT_FRM_STACK	0x00
-#define UDP_PKT_FRM_NETWORK	0x01
-
-/* Maximum interrupt test counter */
-#define MAX_INTR_TEST_COUNTER	100
-
-/* Critical Values for RACE conditions*/
-#define CRITICAL_IN_ISR		0xA1
-#define CRITICAL_INTR_HANDLED	0xB1
-
-/****** Data Types **********************************************************/
-
-/*----------------------------------------------------------------------------
- * X.25-specific link-level configuration.
- */
-typedef struct wan_x25_conf
-{
-	unsigned lo_pvc;	/* lowest permanent circuit number */
-	unsigned hi_pvc;	/* highest permanent circuit number */
-	unsigned lo_svc;	/* lowest switched circuit number */
-	unsigned hi_svc;	/* highest switched circuit number */
-	unsigned hdlc_window;	/* HDLC window size (1..7) */
-	unsigned pkt_window;	/* X.25 packet window size (1..7) */
-	unsigned t1;		/* HDLC timer T1, sec (1..30) */
-	unsigned t2;		/* HDLC timer T2, sec (0..29) */
-	unsigned t4;		/* HDLC supervisory frame timer = T4 * T1 */
-	unsigned n2;		/* HDLC retransmission limit (1..30) */
-	unsigned t10_t20;	/* X.25 RESTART timeout, sec (1..255) */
-	unsigned t11_t21;	/* X.25 CALL timeout, sec (1..255) */
-	unsigned t12_t22;	/* X.25 RESET timeout, sec (1..255) */
-	unsigned t13_t23;	/* X.25 CLEAR timeout, sec (1..255) */
-	unsigned t16_t26;	/* X.25 INTERRUPT timeout, sec (1..255) */
-	unsigned t28;		/* X.25 REGISTRATION timeout, sec (1..255) */
-	unsigned r10_r20;	/* RESTART retransmission limit (0..250) */
-	unsigned r12_r22;	/* RESET retransmission limit (0..250) */
-	unsigned r13_r23;	/* CLEAR retransmission limit (0..250) */
-	unsigned ccitt_compat;	/* compatibility mode: 1988/1984/1980 */
-	unsigned x25_conf_opt;   /* User defined x25 config optoins */
-	unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
-	unsigned char logging;   /* Control connection logging */  
-	unsigned char oob_on_modem; /* Whether to send modem status to the user app */
-} wan_x25_conf_t;
-
-/*----------------------------------------------------------------------------
- * Frame relay specific link-level configuration.
- */
-typedef struct wan_fr_conf
-{
-	unsigned signalling;	/* local in-channel signalling type */
-	unsigned t391;		/* link integrity verification timer */
-	unsigned t392;		/* polling verification timer */
-	unsigned n391;		/* full status polling cycle counter */
-	unsigned n392;		/* error threshold counter */
-	unsigned n393;		/* monitored events counter */
-	unsigned dlci_num;	/* number of DLCs (access node) */
-	unsigned  dlci[100];    /* List of all DLCIs */
-} wan_fr_conf_t;
-
-/*----------------------------------------------------------------------------
- * PPP-specific link-level configuration.
- */
-typedef struct wan_ppp_conf
-{
-	unsigned restart_tmr;	/* restart timer */
-	unsigned auth_rsrt_tmr;	/* authentication timer */
-	unsigned auth_wait_tmr;	/* authentication timer */
-	unsigned mdm_fail_tmr;	/* modem failure timer */
-	unsigned dtr_drop_tmr;	/* DTR drop timer */
-	unsigned connect_tmout;	/* connection timeout */
-	unsigned conf_retry;	/* max. retry */
-	unsigned term_retry;	/* max. retry */
-	unsigned fail_retry;	/* max. retry */
-	unsigned auth_retry;	/* max. retry */
-	unsigned auth_options;	/* authentication opt. */
-	unsigned ip_options;	/* IP options */
-	char	authenticator;	/* AUTHENTICATOR or not */
-	char	ip_mode;	/* Static/Host/Peer */
-} wan_ppp_conf_t;
-
-/*----------------------------------------------------------------------------
- * CHDLC-specific link-level configuration.
- */
-typedef struct wan_chdlc_conf
-{
-	unsigned char ignore_dcd;	/* Protocol options:		*/
-	unsigned char ignore_cts;	/*  Ignore these to determine	*/
-	unsigned char ignore_keepalive;	/*  link status (Yes or No)	*/
-	unsigned char hdlc_streaming;	/*  hdlc_streaming mode (Y/N) */
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-} wan_chdlc_conf_t;
-
-
-/*----------------------------------------------------------------------------
- * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
- */
-typedef struct wandev_conf
-{
-	unsigned magic;		/* magic number (for verification) */
-	unsigned config_id;	/* configuration structure identifier */
-				/****** hardware configuration ******/
-	unsigned ioport;	/* adapter I/O port base */
-	unsigned long maddr;	/* dual-port memory address */
-	unsigned msize;		/* dual-port memory size */
-	int irq;		/* interrupt request level */
-	int dma;		/* DMA request level */
-        char S514_CPU_no[1];	/* S514 PCI adapter CPU number ('A' or 'B') */
-        unsigned PCI_slot_no;	/* S514 PCI adapter slot number */
-	char auto_pci_cfg;	/* S515 PCI automatic slot detection */
-	char comm_port;		/* Communication Port (PRI=0, SEC=1) */ 
-	unsigned bps;		/* data transfer rate */
-	unsigned mtu;		/* maximum transmit unit size */
-        unsigned udp_port;      /* UDP port for management */
-	unsigned char ttl;	/* Time To Live for UDP security */
-	unsigned char ft1;	/* FT1 Configurator Option */
-        char interface;		/* RS-232/V.35, etc. */
-	char clocking;		/* external/internal */
-	char line_coding;	/* NRZ/NRZI/FM0/FM1, etc. */
-	char station;		/* DTE/DCE, primary/secondary, etc. */
-	char connection;	/* permanent/switched/on-demand */
-	char read_mode;		/* read mode: Polling or interrupt */
-	char receive_only;	/* disable tx buffers */
-	char tty;		/* Create a fake tty device */
-	unsigned tty_major;	/* Major number for wanpipe tty device */
-	unsigned tty_minor; 	/* Minor number for wanpipe tty device */
-	unsigned tty_mode;	/* TTY operation mode SYNC or ASYNC */
-	char backup;		/* Backup Mode */
-	unsigned hw_opt[4];	/* other hardware options */
-	unsigned reserved[4];
-				/****** arbitrary data ***************/
-	unsigned data_size;	/* data buffer size */
-	void* data;		/* data buffer, e.g. firmware */
-	union			/****** protocol-specific ************/
-	{
-		wan_x25_conf_t x25;	/* X.25 configuration */
-		wan_ppp_conf_t ppp;	/* PPP configuration */
-		wan_fr_conf_t fr;	/* frame relay configuration */
-		wan_chdlc_conf_t chdlc;	/* Cisco HDLC configuration */
-	} u;
-} wandev_conf_t;
-
-/* 'config_id' definitions */
-#define	WANCONFIG_X25	101	/* X.25 link */
-#define	WANCONFIG_FR	102	/* frame relay link */
-#define	WANCONFIG_PPP	103	/* synchronous PPP link */
-#define WANCONFIG_CHDLC	104	/* Cisco HDLC Link */
-#define WANCONFIG_BSC	105	/* BiSync Streaming */
-#define WANCONFIG_HDLC	106	/* HDLC Support */
-#define WANCONFIG_MPPP  107	/* Multi Port PPP over RAW CHDLC */
-
-/*
- * Configuration options defines.
- */
-/* general options */
-#define	WANOPT_OFF	0
-#define	WANOPT_ON	1
-#define	WANOPT_NO	0
-#define	WANOPT_YES	1
-
-/* intercace options */
-#define	WANOPT_RS232	0
-#define	WANOPT_V35	1
-
-/* data encoding options */
-#define	WANOPT_NRZ	0
-#define	WANOPT_NRZI	1
-#define	WANOPT_FM0	2
-#define	WANOPT_FM1	3
-
-/* link type options */
-#define	WANOPT_POINTTOPOINT	0	/* RTS always active */
-#define	WANOPT_MULTIDROP	1	/* RTS is active when transmitting */
-
-/* clocking options */
-#define	WANOPT_EXTERNAL	0
-#define	WANOPT_INTERNAL	1
-
-/* station options */
-#define	WANOPT_DTE		0
-#define	WANOPT_DCE		1
-#define	WANOPT_CPE		0
-#define	WANOPT_NODE		1
-#define	WANOPT_SECONDARY	0
-#define	WANOPT_PRIMARY		1
-
-/* connection options */
-#define	WANOPT_PERMANENT	0	/* DTR always active */
-#define	WANOPT_SWITCHED		1	/* use DTR to setup link (dial-up) */
-#define	WANOPT_ONDEMAND		2	/* activate DTR only before sending */
-
-/* frame relay in-channel signalling */
-#define	WANOPT_FR_ANSI		1	/* ANSI T1.617 Annex D */
-#define	WANOPT_FR_Q933		2	/* ITU Q.933A */
-#define	WANOPT_FR_LMI		3	/* LMI */
-
-/* PPP IP Mode Options */
-#define	WANOPT_PPP_STATIC	0
-#define	WANOPT_PPP_HOST		1
-#define	WANOPT_PPP_PEER		2
-
-/* ASY Mode Options */
-#define WANOPT_ONE 		1
-#define WANOPT_TWO		2
-#define WANOPT_ONE_AND_HALF	3
-
-#define WANOPT_NONE	0
-#define WANOPT_ODD      1
-#define WANOPT_EVEN	2
-
-/* CHDLC Protocol Options */
-/* DF Commented out for now.
-
-#define WANOPT_CHDLC_NO_DCD		IGNORE_DCD_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_CTS		IGNORE_CTS_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_KEEPALIVE	IGNORE_KPALV_FOR_LINK_STAT
-*/
-
-/* Port options */
-#define WANOPT_PRI 0
-#define WANOPT_SEC 1
-/* read mode */
-#define	WANOPT_INTR	0
-#define WANOPT_POLL	1
-
-
-#define WANOPT_TTY_SYNC  0
-#define WANOPT_TTY_ASYNC 1
-/*----------------------------------------------------------------------------
- * WAN Link Status Info (for ROUTER_STAT IOCTL).
- */
-typedef struct wandev_stat
-{
-	unsigned state;		/* link state */
-	unsigned ndev;		/* number of configured interfaces */
-
-	/* link/interface configuration */
-	unsigned connection;	/* permanent/switched/on-demand */
-	unsigned media_type;	/* Frame relay/PPP/X.25/SDLC, etc. */
-	unsigned mtu;		/* max. transmit unit for this device */
-
-	/* physical level statistics */
-	unsigned modem_status;	/* modem status */
-	unsigned rx_frames;	/* received frames count */
-	unsigned rx_overruns;	/* receiver overrun error count */
-	unsigned rx_crc_err;	/* receive CRC error count */
-	unsigned rx_aborts;	/* received aborted frames count */
-	unsigned rx_bad_length;	/* unexpetedly long/short frames count */
-	unsigned rx_dropped;	/* frames discarded at device level */
-	unsigned tx_frames;	/* transmitted frames count */
-	unsigned tx_underruns;	/* aborted transmissions (underruns) count */
-	unsigned tx_timeouts;	/* transmission timeouts */
-	unsigned tx_rejects;	/* other transmit errors */
-
-	/* media level statistics */
-	unsigned rx_bad_format;	/* frames with invalid format */
-	unsigned rx_bad_addr;	/* frames with invalid media address */
-	unsigned tx_retries;	/* frames re-transmitted */
-	unsigned reserved[16];	/* reserved for future use */
-} wandev_stat_t;
-
-/* 'state' defines */
-enum wan_states
-{
-	WAN_UNCONFIGURED,	/* link/channel is not configured */
-	WAN_DISCONNECTED,	/* link/channel is disconnected */
-	WAN_CONNECTING,		/* connection is in progress */
-	WAN_CONNECTED,		/* link/channel is operational */
-	WAN_LIMIT,		/* for verification only */
-	WAN_DUALPORT,		/* for Dual Port cards */
-	WAN_DISCONNECTING,
-	WAN_FT1_READY		/* FT1 Configurator Ready */
-};
-
-enum {
-	WAN_LOCAL_IP,
-	WAN_POINTOPOINT_IP,
-	WAN_NETMASK_IP,
-	WAN_BROADCAST_IP
-};
-
-/* 'modem_status' masks */
-#define	WAN_MODEM_CTS	0x0001	/* CTS line active */
-#define	WAN_MODEM_DCD	0x0002	/* DCD line active */
-#define	WAN_MODEM_DTR	0x0010	/* DTR line active */
-#define	WAN_MODEM_RTS	0x0020	/* RTS line active */
-
-/*----------------------------------------------------------------------------
- * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
- */
-typedef struct wanif_conf
-{
-	unsigned magic;			/* magic number */
-	unsigned config_id;		/* configuration identifier */
-	char name[WAN_IFNAME_SZ+1];	/* interface name, ASCIIZ */
-	char addr[WAN_ADDRESS_SZ+1];	/* media address, ASCIIZ */
-	char usedby[USED_BY_FIELD];	/* used by API or WANPIPE */
-	unsigned idle_timeout;		/* sec, before disconnecting */
-	unsigned hold_timeout;		/* sec, before re-connecting */
-	unsigned cir;			/* Committed Information Rate fwd,bwd*/
-	unsigned bc;			/* Committed Burst Size fwd, bwd */
-	unsigned be;			/* Excess Burst Size fwd, bwd */ 
-	unsigned char enable_IPX;	/* Enable or Disable IPX */
-	unsigned char inarp;		/* Send Inverse ARP requests Y/N */
-	unsigned inarp_interval;	/* sec, between InARP requests */
-	unsigned long network_number;	/* Network Number for IPX */
-	char mc;			/* Multicast on or off */
-	char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
-	unsigned char port;		/* board port */
-	unsigned char protocol;		/* prococol used in this channel (TCPOX25 or X25) */
-	char pap;			/* PAP enabled or disabled */
-	char chap;			/* CHAP enabled or disabled */
-	unsigned char userid[511];	/* List of User Id */
-	unsigned char passwd[511];	/* List of passwords */
-	unsigned char sysname[31];	/* Name of the system */
-	unsigned char ignore_dcd;	/* Protocol options: */
-	unsigned char ignore_cts;	/*  Ignore these to determine */
-	unsigned char ignore_keepalive;	/*  link status (Yes or No) */
-	unsigned char hdlc_streaming;	/*  Hdlc streaming mode (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-	unsigned char ttl;		/* Time To Live for UDP security */
-	char interface;			/* RS-232/V.35, etc. */
-	char clocking;			/* external/internal */
-	unsigned bps;			/* data transfer rate */
-	unsigned mtu;			/* maximum transmit unit size */
-	unsigned char if_down;		/* brind down interface when disconnected */
-	unsigned char gateway;		/* Is this interface a gateway */
-	unsigned char true_if_encoding;	/* Set the dev->type to true board protocol */
-
-	unsigned char asy_data_trans;     /* async API options */
-        unsigned char rts_hs_for_receive; /* async Protocol options */
-        unsigned char xon_xoff_hs_for_receive;
-	unsigned char xon_xoff_hs_for_transmit;
-	unsigned char dcd_hs_for_transmit;
-	unsigned char cts_hs_for_transmit;
-	unsigned char async_mode;
-	unsigned tx_bits_per_char;
-	unsigned rx_bits_per_char;
-	unsigned stop_bits;  
-	unsigned char parity;
- 	unsigned break_timer;
-        unsigned inter_char_timer;
-	unsigned rx_complete_length;
-	unsigned xon_char;
-	unsigned xoff_char;
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-} wanif_conf_t;
+#include <uapi/linux/wanrouter.h>
 
-#ifdef	__KERNEL__
 /****** Kernel Interface ****************************************************/
 
 #include <linux/fs.h>		/* support for device drivers */
@@ -528,5 +126,4 @@ extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long a
 /* list of registered devices */
 extern struct wan_device *wanrouter_router_devlist;
 
-#endif	/* __KERNEL__ */
 #endif	/* _ROUTER_H */
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index da70f0facd2b..b7f45d48b2de 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -5,59 +5,14 @@
  * by Ken Hollis <khollis@bitgate.com>
  *
  */
-
 #ifndef _LINUX_WATCHDOG_H
 #define _LINUX_WATCHDOG_H
 
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-#define	WATCHDOG_IOCTL_BASE	'W'
-
-struct watchdog_info {
-	__u32 options;		/* Options the card/driver supports */
-	__u32 firmware_version;	/* Firmware version of the card */
-	__u8  identity[32];	/* Identity of the board */
-};
-
-#define	WDIOC_GETSUPPORT	_IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
-#define	WDIOC_GETSTATUS		_IOR(WATCHDOG_IOCTL_BASE, 1, int)
-#define	WDIOC_GETBOOTSTATUS	_IOR(WATCHDOG_IOCTL_BASE, 2, int)
-#define	WDIOC_GETTEMP		_IOR(WATCHDOG_IOCTL_BASE, 3, int)
-#define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
-#define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
-#define	WDIOC_SETTIMEOUT        _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
-#define	WDIOC_GETTIMEOUT        _IOR(WATCHDOG_IOCTL_BASE, 7, int)
-#define	WDIOC_SETPRETIMEOUT	_IOWR(WATCHDOG_IOCTL_BASE, 8, int)
-#define	WDIOC_GETPRETIMEOUT	_IOR(WATCHDOG_IOCTL_BASE, 9, int)
-#define	WDIOC_GETTIMELEFT	_IOR(WATCHDOG_IOCTL_BASE, 10, int)
-
-#define	WDIOF_UNKNOWN		-1	/* Unknown flag error */
-#define	WDIOS_UNKNOWN		-1	/* Unknown status error */
-
-#define	WDIOF_OVERHEAT		0x0001	/* Reset due to CPU overheat */
-#define	WDIOF_FANFAULT		0x0002	/* Fan failed */
-#define	WDIOF_EXTERN1		0x0004	/* External relay 1 */
-#define	WDIOF_EXTERN2		0x0008	/* External relay 2 */
-#define	WDIOF_POWERUNDER	0x0010	/* Power bad/power fault */
-#define	WDIOF_CARDRESET		0x0020	/* Card previously reset the CPU */
-#define	WDIOF_POWEROVER		0x0040	/* Power over voltage */
-#define	WDIOF_SETTIMEOUT	0x0080  /* Set timeout (in seconds) */
-#define	WDIOF_MAGICCLOSE	0x0100	/* Supports magic close char */
-#define	WDIOF_PRETIMEOUT	0x0200  /* Pretimeout (in seconds), get/set */
-#define	WDIOF_ALARMONLY		0x0400	/* Watchdog triggers a management or
-					   other external alarm not a reboot */
-#define	WDIOF_KEEPALIVEPING	0x8000	/* Keep alive ping reply */
-
-#define	WDIOS_DISABLECARD	0x0001	/* Turn off the watchdog timer */
-#define	WDIOS_ENABLECARD	0x0002	/* Turn on the watchdog timer */
-#define	WDIOS_TEMPPANIC		0x0004	/* Kernel panic on temperature trip */
-
-#ifdef __KERNEL__
 
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/cdev.h>
+#include <uapi/linux/watchdog.h>
 
 struct watchdog_ops;
 struct watchdog_device;
@@ -178,6 +133,4 @@ static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
 extern int watchdog_register_device(struct watchdog_device *);
 extern void watchdog_unregister_device(struct watchdog_device *);
 
-#endif	/* __KERNEL__ */
-
 #endif  /* ifndef _LINUX_WATCHDOG_H */
diff --git a/include/linux/wimax.h b/include/linux/wimax.h
deleted file mode 100644
index 9f6b77af2f6d..000000000000
--- a/include/linux/wimax.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Linux WiMax
- * API for user space
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *  - Initial implementation
- *
- *
- * This file declares the user/kernel protocol that is spoken over
- * Generic Netlink, as well as any type declaration that is to be used
- * by kernel and user space.
- *
- * It is intended for user space to clone it verbatim to use it as a
- * primary reference for definitions.
- *
- * Stuff intended for kernel usage as well as full protocol and stack
- * documentation is rooted in include/net/wimax.h.
- */
-
-#ifndef __LINUX__WIMAX_H__
-#define __LINUX__WIMAX_H__
-
-#include <linux/types.h>
-
-enum {
-	/**
-	 * Version of the interface (unsigned decimal, MMm, max 25.5)
-	 * M - Major: change if removing or modifying an existing call.
-	 * m - minor: change when adding a new call
-	 */
-	WIMAX_GNL_VERSION = 01,
-	/* Generic NetLink attributes */
-	WIMAX_GNL_ATTR_INVALID = 0x00,
-	WIMAX_GNL_ATTR_MAX = 10,
-};
-
-
-/*
- * Generic NetLink operations
- *
- * Most of these map to an API call; _OP_ stands for operation, _RP_
- * for reply and _RE_ for report (aka: signal).
- */
-enum {
-	WIMAX_GNL_OP_MSG_FROM_USER,	/* User to kernel message */
-	WIMAX_GNL_OP_MSG_TO_USER,	/* Kernel to user message */
-	WIMAX_GNL_OP_RFKILL,	/* Run wimax_rfkill() */
-	WIMAX_GNL_OP_RESET,	/* Run wimax_rfkill() */
-	WIMAX_GNL_RE_STATE_CHANGE,	/* Report: status change */
-	WIMAX_GNL_OP_STATE_GET,		/* Request for current state */
-};
-
-
-/* Message from user / to user */
-enum {
-	WIMAX_GNL_MSG_IFIDX = 1,
-	WIMAX_GNL_MSG_PIPE_NAME,
-	WIMAX_GNL_MSG_DATA,
-};
-
-
-/*
- * wimax_rfkill()
- *
- * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's
- * switch state (DISABLED/ENABLED).
- */
-enum wimax_rf_state {
-	WIMAX_RF_OFF = 0,	/* Radio is off, rfkill on/enabled */
-	WIMAX_RF_ON = 1,	/* Radio is on, rfkill off/disabled */
-	WIMAX_RF_QUERY = 2,
-};
-
-/* Attributes */
-enum {
-	WIMAX_GNL_RFKILL_IFIDX = 1,
-	WIMAX_GNL_RFKILL_STATE,
-};
-
-
-/* Attributes for wimax_reset() */
-enum {
-	WIMAX_GNL_RESET_IFIDX = 1,
-};
-
-/* Attributes for wimax_state_get() */
-enum {
-	WIMAX_GNL_STGET_IFIDX = 1,
-};
-
-/*
- * Attributes for the Report State Change
- *
- * For now we just have the old and new states; new attributes might
- * be added later on.
- */
-enum {
-	WIMAX_GNL_STCH_IFIDX = 1,
-	WIMAX_GNL_STCH_STATE_OLD,
-	WIMAX_GNL_STCH_STATE_NEW,
-};
-
-
-/**
- * enum wimax_st - The different states of a WiMAX device
- * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed,
- *     but still wimax_dev_add() hasn't been called. There is no state.
- *
- * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and
- *     networking stacks, but it is not initialized (normally that is
- *     done with 'ifconfig DEV up' [or equivalent], which can upload
- *     firmware and enable communications with the device).
- *     In this state, the device is powered down and using as less
- *     power as possible.
- *     This state is the default after a call to wimax_dev_add(). It
- *     is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED
- *     or %WIMAX_ST_RADIO_OFF in _probe() after the call to
- *     wimax_dev_add().
- *     It is recommended that the driver leaves this state when
- *     calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV
- *     down'.
- *
- * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API
- *     operations are allowed to proceed except the ones needed to
- *     complete the device clean up process.
- *
- * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device
- *     is setup, but the device still requires some configuration
- *     before being operational.
- *     Some WiMAX API calls might work.
- *
- * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether
- *     by hardware or software switches).
- *     It is recommended to always leave the device in this state
- *     after initialization.
- *
- * @WIMAX_ST_READY: The device is fully up and radio is on.
- *
- * @WIMAX_ST_SCANNING: [optional] The device has been instructed to
- *     scan. In this state, the device cannot be actively connected to
- *     a network.
- *
- * @WIMAX_ST_CONNECTING: The device is connecting to a network. This
- *     state exists because in some devices, the connect process can
- *     include a number of negotiations between user space, kernel
- *     space and the device. User space needs to know what the device
- *     is doing. If the connect sequence in a device is atomic and
- *     fast, the device can transition directly to CONNECTED
- *
- * @WIMAX_ST_CONNECTED: The device is connected to a network.
- *
- * @__WIMAX_ST_INVALID: This is an invalid state used to mark the
- *     maximum numeric value of states.
- *
- * Description:
- *
- * Transitions from one state to another one are atomic and can only
- * be caused in kernel space with wimax_state_change(). To read the
- * state, use wimax_state_get().
- *
- * States starting with __ are internal and shall not be used or
- * referred to by drivers or userspace. They look ugly, but that's the
- * point -- if any use is made non-internal to the stack, it is easier
- * to catch on review.
- *
- * All API operations [with well defined exceptions] will take the
- * device mutex before starting and then check the state. If the state
- * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or
- * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with
- * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN.
- *
- * The order of the definitions is important, so we can do numerical
- * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready
- * to operate).
- */
-/*
- * The allowed state transitions are described in the table below
- * (states in rows can go to states in columns where there is an X):
- *
- *                                  UNINI   RADIO READY SCAN CONNEC CONNEC
- *             NULL DOWN QUIESCING TIALIZED  OFF        NING  TING   TED
- * NULL         -    x
- * DOWN              -      x        x       x
- * QUIESCING         x      -
- * UNINITIALIZED            x        -       x
- * RADIO_OFF                x                -     x
- * READY                    x                x     -     x     x      x
- * SCANNING                 x                x     x     -     x      x
- * CONNECTING               x                x     x     x     -      x
- * CONNECTED                x                x     x                  -
- *
- * This table not available in kernel-doc because the formatting messes it up.
- */
- enum wimax_st {
-	__WIMAX_ST_NULL = 0,
-	WIMAX_ST_DOWN,
-	__WIMAX_ST_QUIESCING,
-	WIMAX_ST_UNINITIALIZED,
-	WIMAX_ST_RADIO_OFF,
-	WIMAX_ST_READY,
-	WIMAX_ST_SCANNING,
-	WIMAX_ST_CONNECTING,
-	WIMAX_ST_CONNECTED,
-	__WIMAX_ST_INVALID			/* Always keep last */
-};
-
-
-#endif /* #ifndef __LINUX__WIMAX_H__ */
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index 4395b28bb86c..4ea4c6e2383d 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -6,690 +6,11 @@
  * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
  * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
  */
-
 #ifndef _LINUX_WIRELESS_H
 #define _LINUX_WIRELESS_H
 
-/************************** DOCUMENTATION **************************/
-/*
- * Initial APIs (1996 -> onward) :
- * -----------------------------
- * Basically, the wireless extensions are for now a set of standard ioctl
- * call + /proc/net/wireless
- *
- * The entry /proc/net/wireless give statistics and information on the
- * driver.
- * This is better than having each driver having its entry because
- * its centralised and we may remove the driver module safely.
- *
- * Ioctl are used to configure the driver and issue commands.  This is
- * better than command line options of insmod because we may want to
- * change dynamically (while the driver is running) some parameters.
- *
- * The ioctl mechanimsm are copied from standard devices ioctl.
- * We have the list of command plus a structure descibing the
- * data exchanged...
- * Note that to add these ioctl, I was obliged to modify :
- *	# net/core/dev.c (two place + add include)
- *	# net/ipv4/af_inet.c (one place + add include)
- *
- * /proc/net/wireless is a copy of /proc/net/dev.
- * We have a structure for data passed from the driver to /proc/net/wireless
- * Too add this, I've modified :
- *	# net/core/dev.c (two other places)
- *	# include/linux/netdevice.h (one place)
- *	# include/linux/proc_fs.h (one place)
- *
- * New driver API (2002 -> onward) :
- * -------------------------------
- * This file is only concerned with the user space API and common definitions.
- * The new driver API is defined and documented in :
- *	# include/net/iw_handler.h
- *
- * Note as well that /proc/net/wireless implementation has now moved in :
- *	# net/core/wireless.c
- *
- * Wireless Events (2002 -> onward) :
- * --------------------------------
- * Events are defined at the end of this file, and implemented in :
- *	# net/core/wireless.c
- *
- * Other comments :
- * --------------
- * Do not add here things that are redundant with other mechanisms
- * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
- * wireless specific.
- *
- * These wireless extensions are not magic : each driver has to provide
- * support for them...
- *
- * IMPORTANT NOTE : As everything in the kernel, this is very much a
- * work in progress. Contact me if you have ideas of improvements...
- */
-
-/***************************** INCLUDES *****************************/
-
-#include <linux/types.h>		/* for __u* and __s* typedefs */
-#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
-#include <linux/if.h>			/* for IFNAMSIZ and co... */
-
-/***************************** VERSION *****************************/
-/*
- * This constant is used to know the availability of the wireless
- * extensions and to know which version of wireless extensions it is
- * (there is some stuff that will be added in the future...)
- * I just plan to increment with each new version.
- */
-#define WIRELESS_EXT	22
-
-/*
- * Changes :
- *
- * V2 to V3
- * --------
- *	Alan Cox start some incompatibles changes. I've integrated a bit more.
- *	- Encryption renamed to Encode to avoid US regulation problems
- *	- Frequency changed from float to struct to avoid problems on old 386
- *
- * V3 to V4
- * --------
- *	- Add sensitivity
- *
- * V4 to V5
- * --------
- *	- Missing encoding definitions in range
- *	- Access points stuff
- *
- * V5 to V6
- * --------
- *	- 802.11 support (ESSID ioctls)
- *
- * V6 to V7
- * --------
- *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
- *
- * V7 to V8
- * --------
- *	- Changed my e-mail address
- *	- More 802.11 support (nickname, rate, rts, frag)
- *	- List index in frequencies
- *
- * V8 to V9
- * --------
- *	- Support for 'mode of operation' (ad-hoc, managed...)
- *	- Support for unicast and multicast power saving
- *	- Change encoding to support larger tokens (>64 bits)
- *	- Updated iw_params (disable, flags) and use it for NWID
- *	- Extracted iw_point from iwreq for clarity
- *
- * V9 to V10
- * ---------
- *	- Add PM capability to range structure
- *	- Add PM modifier : MAX/MIN/RELATIVE
- *	- Add encoding option : IW_ENCODE_NOKEY
- *	- Add TxPower ioctls (work like TxRate)
- *
- * V10 to V11
- * ----------
- *	- Add WE version in range (help backward/forward compatibility)
- *	- Add retry ioctls (work like PM)
- *
- * V11 to V12
- * ----------
- *	- Add SIOCSIWSTATS to get /proc/net/wireless programatically
- *	- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
- *	- Add new statistics (frag, retry, beacon)
- *	- Add average quality (for user space calibration)
- *
- * V12 to V13
- * ----------
- *	- Document creation of new driver API.
- *	- Extract union iwreq_data from struct iwreq (for new driver API).
- *	- Rename SIOCSIWNAME as SIOCSIWCOMMIT
- *
- * V13 to V14
- * ----------
- *	- Wireless Events support : define struct iw_event
- *	- Define additional specific event numbers
- *	- Add "addr" and "param" fields in union iwreq_data
- *	- AP scanning stuff (SIOCSIWSCAN and friends)
- *
- * V14 to V15
- * ----------
- *	- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
- *	- Make struct iw_freq signed (both m & e), add explicit padding
- *	- Add IWEVCUSTOM for driver specific event/scanning token
- *	- Add IW_MAX_GET_SPY for driver returning a lot of addresses
- *	- Add IW_TXPOW_RANGE for range of Tx Powers
- *	- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
- *	- Add IW_MODE_MONITOR for passive monitor
- *
- * V15 to V16
- * ----------
- *	- Increase the number of bitrates in iw_range to 32 (for 802.11g)
- *	- Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
- *	- Reshuffle struct iw_range for increases, add filler
- *	- Increase IW_MAX_AP to 64 for driver returning a lot of addresses
- *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
- *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
- *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
- *
- * V16 to V17
- * ----------
- *	- Add flags to frequency -> auto/fixed
- *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
- *	- Wireless Event capability in struct iw_range
- *	- Add support for relative TxPower (yick !)
- *
- * V17 to V18 (From Jouni Malinen <j@w1.fi>)
- * ----------
- *	- Add support for WPA/WPA2
- *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
- *	  SIOCGIWENCODEEXT)
- *	- Add SIOCSIWGENIE/SIOCGIWGENIE
- *	- Add SIOCSIWMLME
- *	- Add SIOCSIWPMKSA
- *	- Add struct iw_range bit field for supported encoding capabilities
- *	- Add optional scan request parameters for SIOCSIWSCAN
- *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
- *	  related parameters (extensible up to 4096 parameter values)
- *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
- *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
- *
- * V18 to V19
- * ----------
- *	- Remove (struct iw_point *)->pointer from events and streams
- *	- Remove header includes to help user space
- *	- Increase IW_ENCODING_TOKEN_MAX from 32 to 64
- *	- Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
- *	- Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
- *	- Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
- *
- * V19 to V20
- * ----------
- *	- RtNetlink requests support (SET/GET)
- *
- * V20 to V21
- * ----------
- *	- Remove (struct net_device *)->get_wireless_stats()
- *	- Change length in ESSID and NICK to strlen() instead of strlen()+1
- *	- Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
- *	- Power/Retry relative values no longer * 100000
- *	- Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
- *
- * V21 to V22
- * ----------
- *	- Prevent leaking of kernel space in stream on 64 bits.
- */
-
-/**************************** CONSTANTS ****************************/
-
-/* -------------------------- IOCTL LIST -------------------------- */
-
-/* Wireless Identification */
-#define SIOCSIWCOMMIT	0x8B00		/* Commit pending changes to driver */
-#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
-/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
- * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
- * Don't put the name of your driver there, it's useless. */
-
-/* Basic operations */
-#define SIOCSIWNWID	0x8B02		/* set network id (pre-802.11) */
-#define SIOCGIWNWID	0x8B03		/* get network id (the cell) */
-#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
-#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
-#define SIOCSIWMODE	0x8B06		/* set operation mode */
-#define SIOCGIWMODE	0x8B07		/* get operation mode */
-#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
-#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
-
-/* Informative stuff */
-#define SIOCSIWRANGE	0x8B0A		/* Unused */
-#define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
-#define SIOCSIWPRIV	0x8B0C		/* Unused */
-#define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
-#define SIOCSIWSTATS	0x8B0E		/* Unused */
-#define SIOCGIWSTATS	0x8B0F		/* Get /proc/net/wireless stats */
-/* SIOCGIWSTATS is strictly used between user space and the kernel, and
- * is never passed to the driver (i.e. the driver will never see it). */
-
-/* Spy support (statistics per MAC address - used for Mobile IP support) */
-#define SIOCSIWSPY	0x8B10		/* set spy addresses */
-#define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
-#define SIOCSIWTHRSPY	0x8B12		/* set spy threshold (spy event) */
-#define SIOCGIWTHRSPY	0x8B13		/* get spy threshold */
-
-/* Access Point manipulation */
-#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
-#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
-#define SIOCGIWAPLIST	0x8B17		/* Deprecated in favor of scanning */
-#define SIOCSIWSCAN	0x8B18		/* trigger scanning (list cells) */
-#define SIOCGIWSCAN	0x8B19		/* get scanning results */
-
-/* 802.11 specific support */
-#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
-#define SIOCGIWESSID	0x8B1B		/* get ESSID */
-#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
-#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
-/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
- * within the 'iwreq' structure, so we need to use the 'data' member to
- * point to a string in user space, like it is done for RANGE... */
-
-/* Other parameters useful in 802.11 and some other devices */
-#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
-#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
-#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
-#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
-#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
-#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
-#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
-#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
-#define SIOCSIWRETRY	0x8B28		/* set retry limits and lifetime */
-#define SIOCGIWRETRY	0x8B29		/* get retry limits and lifetime */
-
-/* Encoding stuff (scrambling, hardware security, WEP...) */
-#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
-#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
-/* Power saving stuff (power management, unicast and multicast) */
-#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
-#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
-
-/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
- * This ioctl uses struct iw_point and data buffer that includes IE id and len
- * fields. More than one IE may be included in the request. Setting the generic
- * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
- * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
- * are required to report the used IE as a wireless event, e.g., when
- * associating with an AP. */
-#define SIOCSIWGENIE	0x8B30		/* set generic IE */
-#define SIOCGIWGENIE	0x8B31		/* get generic IE */
-
-/* WPA : IEEE 802.11 MLME requests */
-#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
-					 * struct iw_mlme */
-/* WPA : Authentication mode parameters */
-#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
-#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
-
-/* WPA : Extended version of encoding configuration */
-#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
-#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
-
-/* WPA2 : PMKSA cache management */
-#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
-
-/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
-
-/* These 32 ioctl are wireless device private, for 16 commands.
- * Each driver is free to use them for whatever purpose it chooses,
- * however the driver *must* export the description of those ioctls
- * with SIOCGIWPRIV and *must* use arguments as defined below.
- * If you don't follow those rules, DaveM is going to hate you (reason :
- * it make mixed 32/64bit operation impossible).
- */
-#define SIOCIWFIRSTPRIV	0x8BE0
-#define SIOCIWLASTPRIV	0x8BFF
-/* Previously, we were using SIOCDEVPRIVATE, but we now have our
- * separate range because of collisions with other tools such as
- * 'mii-tool'.
- * We now have 32 commands, so a bit more space ;-).
- * Also, all 'even' commands are only usable by root and don't return the
- * content of ifr/iwr to user (but you are not obliged to use the set/get
- * convention, just use every other two command). More details in iwpriv.c.
- * And I repeat : you are not forced to use them with iwpriv, but you
- * must be compliant with it.
- */
-
-/* ------------------------- IOCTL STUFF ------------------------- */
-
-/* The first and the last (range) */
-#define SIOCIWFIRST	0x8B00
-#define SIOCIWLAST	SIOCIWLASTPRIV		/* 0x8BFF */
-#define IW_IOCTL_IDX(cmd)	((cmd) - SIOCIWFIRST)
-#define IW_HANDLER(id, func)			\
-	[IW_IOCTL_IDX(id)] = func
-
-/* Odd : get (world access), even : set (root access) */
-#define IW_IS_SET(cmd)	(!((cmd) & 0x1))
-#define IW_IS_GET(cmd)	((cmd) & 0x1)
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/* Those are *NOT* ioctls, do not issue request on them !!! */
-/* Most events use the same identifier as ioctl requests */
-
-#define IWEVTXDROP	0x8C00		/* Packet dropped to excessive retry */
-#define IWEVQUAL	0x8C01		/* Quality part of statistics (scan) */
-#define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
-#define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
-#define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
-#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
-					 * (scan results); This includes id and
-					 * length fields. One IWEVGENIE may
-					 * contain more than one IE. Scan
-					 * results may contain one or more
-					 * IWEVGENIE events. */
-#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
-					 * (struct iw_michaelmicfailure)
-					 */
-#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
-					 * The data includes id and length
-					 * fields and may contain more than one
-					 * IE. This event is required in
-					 * Managed mode if the driver
-					 * generates its own WPA/RSN IE. This
-					 * should be sent just before
-					 * IWEVREGISTERED event for the
-					 * association. */
-#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
-					 * Response. The data includes id and
-					 * length fields and may contain more
-					 * than one IE. This may be sent
-					 * between IWEVASSOCREQIE and
-					 * IWEVREGISTERED events for the
-					 * association. */
-#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
-					 * pre-authentication
-					 * (struct iw_pmkid_cand) */
-
-#define IWEVFIRST	0x8C00
-#define IW_EVENT_IDX(cmd)	((cmd) - IWEVFIRST)
-
-/* ------------------------- PRIVATE INFO ------------------------- */
-/*
- * The following is used with SIOCGIWPRIV. It allow a driver to define
- * the interface (name, type of data) for its private ioctl.
- * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
- */
-
-#define IW_PRIV_TYPE_MASK	0x7000	/* Type of arguments */
-#define IW_PRIV_TYPE_NONE	0x0000
-#define IW_PRIV_TYPE_BYTE	0x1000	/* Char as number */
-#define IW_PRIV_TYPE_CHAR	0x2000	/* Char as character */
-#define IW_PRIV_TYPE_INT	0x4000	/* 32 bits int */
-#define IW_PRIV_TYPE_FLOAT	0x5000	/* struct iw_freq */
-#define IW_PRIV_TYPE_ADDR	0x6000	/* struct sockaddr */
-
-#define IW_PRIV_SIZE_FIXED	0x0800	/* Variable or fixed number of args */
-
-#define IW_PRIV_SIZE_MASK	0x07FF	/* Max number of those args */
-
-/*
- * Note : if the number of args is fixed and the size < 16 octets,
- * instead of passing a pointer we will put args in the iwreq struct...
- */
-
-/* ----------------------- OTHER CONSTANTS ----------------------- */
-
-/* Maximum frequencies in the range struct */
-#define IW_MAX_FREQUENCIES	32
-/* Note : if you have something like 80 frequencies,
- * don't increase this constant and don't fill the frequency list.
- * The user will be able to set by channel anyway... */
-
-/* Maximum bit rates in the range struct */
-#define IW_MAX_BITRATES		32
-
-/* Maximum tx powers in the range struct */
-#define IW_MAX_TXPOWER		8
-/* Note : if you more than 8 TXPowers, just set the max and min or
- * a few of them in the struct iw_range. */
-
-/* Maximum of address that you may set with SPY */
-#define IW_MAX_SPY		8
-
-/* Maximum of address that you may get in the
-   list of access points in range */
-#define IW_MAX_AP		64
-
-/* Maximum size of the ESSID and NICKN strings */
-#define IW_ESSID_MAX_SIZE	32
-
-/* Modes of operation */
-#define IW_MODE_AUTO	0	/* Let the driver decides */
-#define IW_MODE_ADHOC	1	/* Single cell network */
-#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
-#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
-#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
-#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
-#define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
-#define IW_MODE_MESH	7	/* Mesh (IEEE 802.11s) network */
-
-/* Statistics flags (bitmask in updated) */
-#define IW_QUAL_QUAL_UPDATED	0x01	/* Value was updated since last read */
-#define IW_QUAL_LEVEL_UPDATED	0x02
-#define IW_QUAL_NOISE_UPDATED	0x04
-#define IW_QUAL_ALL_UPDATED	0x07
-#define IW_QUAL_DBM		0x08	/* Level + Noise are dBm */
-#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
-#define IW_QUAL_LEVEL_INVALID	0x20
-#define IW_QUAL_NOISE_INVALID	0x40
-#define IW_QUAL_RCPI		0x80	/* Level + Noise are 802.11k RCPI */
-#define IW_QUAL_ALL_INVALID	0x70
-
-/* Frequency flags */
-#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
-#define IW_FREQ_FIXED		0x01	/* Force a specific value */
-
-/* Maximum number of size of encoding token available
- * they are listed in the range structure */
-#define IW_MAX_ENCODING_SIZES	8
-
-/* Maximum size of the encoding token in bytes */
-#define IW_ENCODING_TOKEN_MAX	64	/* 512 bits (for now) */
-
-/* Flags for encoding (along with the token) */
-#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
-#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
-#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
-#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
-#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
-#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
-#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
-#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
-#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
-
-/* Power management flags available (along with the value, if any) */
-#define IW_POWER_ON		0x0000	/* No details... */
-#define IW_POWER_TYPE		0xF000	/* Type of parameter */
-#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
-#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
-#define IW_POWER_MODE		0x0F00	/* Power Management mode */
-#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
-#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
-#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
-#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
-#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
-#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
-#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
-#define IW_POWER_MAX		0x0002	/* Value is a maximum */
-#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
-
-/* Transmit Power flags available */
-#define IW_TXPOW_TYPE		0x00FF	/* Type of value */
-#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
-#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
-#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
-#define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
-
-/* Retry limits and lifetime flags available */
-#define IW_RETRY_ON		0x0000	/* No details... */
-#define IW_RETRY_TYPE		0xF000	/* Type of parameter */
-#define IW_RETRY_LIMIT		0x1000	/* Maximum number of retries*/
-#define IW_RETRY_LIFETIME	0x2000	/* Maximum duration of retries in us */
-#define IW_RETRY_MODIFIER	0x00FF	/* Modify a parameter */
-#define IW_RETRY_MIN		0x0001	/* Value is a minimum  */
-#define IW_RETRY_MAX		0x0002	/* Value is a maximum */
-#define IW_RETRY_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
-#define IW_RETRY_SHORT		0x0010	/* Value is for short packets  */
-#define IW_RETRY_LONG		0x0020	/* Value is for long packets */
-
-/* Scanning request flags */
-#define IW_SCAN_DEFAULT		0x0000	/* Default scan of the driver */
-#define IW_SCAN_ALL_ESSID	0x0001	/* Scan all ESSIDs */
-#define IW_SCAN_THIS_ESSID	0x0002	/* Scan only this ESSID */
-#define IW_SCAN_ALL_FREQ	0x0004	/* Scan all Frequencies */
-#define IW_SCAN_THIS_FREQ	0x0008	/* Scan only this Frequency */
-#define IW_SCAN_ALL_MODE	0x0010	/* Scan all Modes */
-#define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
-#define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
-#define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
-/* struct iw_scan_req scan_type */
-#define IW_SCAN_TYPE_ACTIVE 0
-#define IW_SCAN_TYPE_PASSIVE 1
-/* Maximum size of returned data */
-#define IW_SCAN_MAX_DATA	4096	/* In bytes */
-
-/* Scan capability flags - in (struct iw_range *)->scan_capa */
-#define IW_SCAN_CAPA_NONE		0x00
-#define IW_SCAN_CAPA_ESSID		0x01
-#define IW_SCAN_CAPA_BSSID		0x02
-#define IW_SCAN_CAPA_CHANNEL	0x04
-#define IW_SCAN_CAPA_MODE		0x08
-#define IW_SCAN_CAPA_RATE		0x10
-#define IW_SCAN_CAPA_TYPE		0x20
-#define IW_SCAN_CAPA_TIME		0x40
-
-/* Max number of char in custom event - use multiple of them if needed */
-#define IW_CUSTOM_MAX		256	/* In bytes */
-
-/* Generic information element */
-#define IW_GENERIC_IE_MAX	1024
-
-/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
-#define IW_MLME_DEAUTH		0
-#define IW_MLME_DISASSOC	1
-#define IW_MLME_AUTH		2
-#define IW_MLME_ASSOC		3
-
-/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
-#define IW_AUTH_INDEX		0x0FFF
-#define IW_AUTH_FLAGS		0xF000
-/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
- * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
- * parameter that is being set/get to; value will be read/written to
- * struct iw_param value field) */
-#define IW_AUTH_WPA_VERSION		0
-#define IW_AUTH_CIPHER_PAIRWISE		1
-#define IW_AUTH_CIPHER_GROUP		2
-#define IW_AUTH_KEY_MGMT		3
-#define IW_AUTH_TKIP_COUNTERMEASURES	4
-#define IW_AUTH_DROP_UNENCRYPTED	5
-#define IW_AUTH_80211_AUTH_ALG		6
-#define IW_AUTH_WPA_ENABLED		7
-#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
-#define IW_AUTH_ROAMING_CONTROL		9
-#define IW_AUTH_PRIVACY_INVOKED		10
-#define IW_AUTH_CIPHER_GROUP_MGMT	11
-#define IW_AUTH_MFP			12
-
-/* IW_AUTH_WPA_VERSION values (bit field) */
-#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
-#define IW_AUTH_WPA_VERSION_WPA		0x00000002
-#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
-
-/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
- * values (bit field) */
-#define IW_AUTH_CIPHER_NONE	0x00000001
-#define IW_AUTH_CIPHER_WEP40	0x00000002
-#define IW_AUTH_CIPHER_TKIP	0x00000004
-#define IW_AUTH_CIPHER_CCMP	0x00000008
-#define IW_AUTH_CIPHER_WEP104	0x00000010
-#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
-
-/* IW_AUTH_KEY_MGMT values (bit field) */
-#define IW_AUTH_KEY_MGMT_802_1X	1
-#define IW_AUTH_KEY_MGMT_PSK	2
-
-/* IW_AUTH_80211_AUTH_ALG values (bit field) */
-#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
-#define IW_AUTH_ALG_SHARED_KEY	0x00000002
-#define IW_AUTH_ALG_LEAP	0x00000004
-
-/* IW_AUTH_ROAMING_CONTROL values */
-#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
-#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
-					 * control */
-
-/* IW_AUTH_MFP (management frame protection) values */
-#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
-#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
-#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
-
-/* SIOCSIWENCODEEXT definitions */
-#define IW_ENCODE_SEQ_MAX_SIZE	8
-/* struct iw_encode_ext ->alg */
-#define IW_ENCODE_ALG_NONE	0
-#define IW_ENCODE_ALG_WEP	1
-#define IW_ENCODE_ALG_TKIP	2
-#define IW_ENCODE_ALG_CCMP	3
-#define IW_ENCODE_ALG_PMK	4
-#define IW_ENCODE_ALG_AES_CMAC	5
-/* struct iw_encode_ext ->ext_flags */
-#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
-#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
-#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
-#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
-
-/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
-#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
-#define IW_MICFAILURE_GROUP	0x00000004
-#define IW_MICFAILURE_PAIRWISE	0x00000008
-#define IW_MICFAILURE_STAKEY	0x00000010
-#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
-					    */
-
-/* Bit field values for enc_capa in struct iw_range */
-#define IW_ENC_CAPA_WPA		0x00000001
-#define IW_ENC_CAPA_WPA2	0x00000002
-#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
-#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
-#define IW_ENC_CAPA_4WAY_HANDSHAKE	0x00000010
-
-/* Event capability macros - in (struct iw_range *)->event_capa
- * Because we have more than 32 possible events, we use an array of
- * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
-#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
-					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
-					 (cmd - SIOCIWFIRST))
-#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
-#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
-/* Event capability constants - event autogenerated by the kernel
- * This list is valid for most 802.11 devices, customise as needed... */
-#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
-				 IW_EVENT_CAPA_MASK(0x8B06) | \
-				 IW_EVENT_CAPA_MASK(0x8B1A))
-#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
-/* "Easy" macro to set events in iw_range (less efficient) */
-#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
-#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
-
-
-/****************************** TYPES ******************************/
-
-/* --------------------------- SUBTYPES --------------------------- */
-/*
- *	Generic format for most parameters that fit in an int
- */
-struct	iw_param
-{
-  __s32		value;		/* The value of the parameter itself */
-  __u8		fixed;		/* Hardware should not use auto select */
-  __u8		disabled;	/* Disable the feature */
-  __u16		flags;		/* Various specifc flags (if any) */
-};
-
-/*
- *	For all data larger than 16 octets, we need to use a
- *	pointer to memory allocated in user space.
- */
-struct	iw_point
-{
-  void __user	*pointer;	/* Pointer to the data  (in user space) */
-  __u16		length;		/* number of fields or size in bytes */
-  __u16		flags;		/* Optional params */
-};
+#include <uapi/linux/wireless.h>
 
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 
 #include <linux/compat.h>
@@ -700,432 +21,6 @@ struct compat_iw_point {
 	__u16 flags;
 };
 #endif
-#endif
-
-/*
- *	A frequency
- *	For numbers lower than 10^9, we encode the number in 'm' and
- *	set 'e' to 0
- *	For number greater than 10^9, we divide it by the lowest power
- *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
- *	The power of 10 is in 'e', the result of the division is in 'm'.
- */
-struct	iw_freq
-{
-	__s32		m;		/* Mantissa */
-	__s16		e;		/* Exponent */
-	__u8		i;		/* List index (when in range struct) */
-	__u8		flags;		/* Flags (fixed/auto) */
-};
-
-/*
- *	Quality of the link
- */
-struct	iw_quality
-{
-	__u8		qual;		/* link quality (%retries, SNR,
-					   %missed beacons or better...) */
-	__u8		level;		/* signal level (dBm) */
-	__u8		noise;		/* noise level (dBm) */
-	__u8		updated;	/* Flags to know if updated */
-};
-
-/*
- *	Packet discarded in the wireless adapter due to
- *	"wireless" specific problems...
- *	Note : the list of counter and statistics in net_device_stats
- *	is already pretty exhaustive, and you should use that first.
- *	This is only additional stats...
- */
-struct	iw_discarded
-{
-	__u32		nwid;		/* Rx : Wrong nwid/essid */
-	__u32		code;		/* Rx : Unable to code/decode (WEP) */
-	__u32		fragment;	/* Rx : Can't perform MAC reassembly */
-	__u32		retries;	/* Tx : Max MAC retries num reached */
-	__u32		misc;		/* Others cases */
-};
-
-/*
- *	Packet/Time period missed in the wireless adapter due to
- *	"wireless" specific problems...
- */
-struct	iw_missed
-{
-	__u32		beacon;		/* Missed beacons/superframe */
-};
-
-/*
- *	Quality range (for spy threshold)
- */
-struct	iw_thrspy
-{
-	struct sockaddr		addr;		/* Source address (hw/mac) */
-	struct iw_quality	qual;		/* Quality of the link */
-	struct iw_quality	low;		/* Low threshold */
-	struct iw_quality	high;		/* High threshold */
-};
-
-/*
- *	Optional data for scan request
- *
- *	Note: these optional parameters are controlling parameters for the
- *	scanning behavior, these do not apply to getting scan results
- *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
- *	provide a merged results with all BSSes even if the previous scan
- *	request limited scanning to a subset, e.g., by specifying an SSID.
- *	Especially, scan results are required to include an entry for the
- *	current BSS if the driver is in Managed mode and associated with an AP.
- */
-struct	iw_scan_req
-{
-	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
-	__u8		essid_len;
-	__u8		num_channels; /* num entries in channel_list;
-				       * 0 = scan all allowed channels */
-	__u8		flags; /* reserved as padding; use zero, this may
-				* be used in the future for adding flags
-				* to request different scan behavior */
-	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
-				* individual address of a specific BSS */
-
-	/*
-	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
-	 * the current ESSID. This allows scan requests for specific ESSID
-	 * without having to change the current ESSID and potentially breaking
-	 * the current association.
-	 */
-	__u8		essid[IW_ESSID_MAX_SIZE];
-
-	/*
-	 * Optional parameters for changing the default scanning behavior.
-	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
-	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
-	 * reasonable default values. min_channel_time defines the time that
-	 * will be used to wait for the first reply on each channel. If no
-	 * replies are received, next channel will be scanned after this. If
-	 * replies are received, total time waited on the channel is defined by
-	 * max_channel_time.
-	 */
-	__u32		min_channel_time; /* in TU */
-	__u32		max_channel_time; /* in TU */
-
-	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
-};
-
-/* ------------------------- WPA SUPPORT ------------------------- */
-
-/*
- *	Extended data structure for get/set encoding (this is used with
- *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
- *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
- *	only the data contents changes (key data -> this structure, including
- *	key data).
- *
- *	If the new key is the first group key, it will be set as the default
- *	TX key. Otherwise, default TX key index is only changed if
- *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
- *
- *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
- *	special "change TX key index" operation which is indicated by setting
- *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
- *
- *	tx_seq/rx_seq are only used when respective
- *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
- *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
- *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
- *	used only by an Authenticator (AP or an IBSS station) to get the
- *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
- *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
- *	debugging/testing.
- */
-struct	iw_encode_ext
-{
-	__u32		ext_flags; /* IW_ENCODE_EXT_* */
-	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
-			       * (group) keys or unicast address for
-			       * individual keys */
-	__u16		alg; /* IW_ENCODE_ALG_* */
-	__u16		key_len;
-	__u8		key[0];
-};
-
-/* SIOCSIWMLME data */
-struct	iw_mlme
-{
-	__u16		cmd; /* IW_MLME_* */
-	__u16		reason_code;
-	struct sockaddr	addr;
-};
-
-/* SIOCSIWPMKSA data */
-#define IW_PMKSA_ADD		1
-#define IW_PMKSA_REMOVE		2
-#define IW_PMKSA_FLUSH		3
-
-#define IW_PMKID_LEN	16
-
-struct	iw_pmksa
-{
-	__u32		cmd; /* IW_PMKSA_* */
-	struct sockaddr	bssid;
-	__u8		pmkid[IW_PMKID_LEN];
-};
-
-/* IWEVMICHAELMICFAILURE data */
-struct	iw_michaelmicfailure
-{
-	__u32		flags;
-	struct sockaddr	src_addr;
-	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-};
-
-/* IWEVPMKIDCAND data */
-#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
-struct	iw_pmkid_cand
-{
-	__u32		flags; /* IW_PMKID_CAND_* */
-	__u32		index; /* the smaller the index, the higher the
-				* priority */
-	struct sockaddr	bssid;
-};
-
-/* ------------------------ WIRELESS STATS ------------------------ */
-/*
- * Wireless statistics (used for /proc/net/wireless)
- */
-struct	iw_statistics
-{
-	__u16		status;		/* Status
-					 * - device dependent for now */
-
-	struct iw_quality	qual;		/* Quality of the link
-						 * (instant/mean/max) */
-	struct iw_discarded	discard;	/* Packet discarded counts */
-	struct iw_missed	miss;		/* Packet missed counts */
-};
-
-/* ------------------------ IOCTL REQUEST ------------------------ */
-/*
- * This structure defines the payload of an ioctl, and is used 
- * below.
- *
- * Note that this structure should fit on the memory footprint
- * of iwreq (which is the same as ifreq), which mean a max size of
- * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
- * You should check this when increasing the structures defined
- * above in this file...
- */
-union	iwreq_data
-{
-	/* Config - generic */
-	char		name[IFNAMSIZ];
-	/* Name : used to verify the presence of  wireless extensions.
-	 * Name of the protocol/provider... */
-
-	struct iw_point	essid;		/* Extended network name */
-	struct iw_param	nwid;		/* network id (or domain - the cell) */
-	struct iw_freq	freq;		/* frequency or channel :
-					 * 0-1000 = channel
-					 * > 1000 = frequency in Hz */
-
-	struct iw_param	sens;		/* signal level threshold */
-	struct iw_param	bitrate;	/* default bit rate */
-	struct iw_param	txpower;	/* default transmit power */
-	struct iw_param	rts;		/* RTS threshold threshold */
-	struct iw_param	frag;		/* Fragmentation threshold */
-	__u32		mode;		/* Operation mode */
-	struct iw_param	retry;		/* Retry limits & lifetime */
-
-	struct iw_point	encoding;	/* Encoding stuff : tokens */
-	struct iw_param	power;		/* PM duration/timeout */
-	struct iw_quality qual;		/* Quality part of statistics */
-
-	struct sockaddr	ap_addr;	/* Access point address */
-	struct sockaddr	addr;		/* Destination address (hw/mac) */
-
-	struct iw_param	param;		/* Other small parameters */
-	struct iw_point	data;		/* Other large parameters */
-};
-
-/*
- * The structure to exchange data for ioctl.
- * This structure is the same as 'struct ifreq', but (re)defined for
- * convenience...
- * Do I need to remind you about structure size (32 octets) ?
- */
-struct	iwreq 
-{
-	union
-	{
-		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
-	} ifr_ifrn;
-
-	/* Data part (defined just above) */
-	union	iwreq_data	u;
-};
-
-/* -------------------------- IOCTL DATA -------------------------- */
-/*
- *	For those ioctl which want to exchange mode data that what could
- *	fit in the above structure...
- */
-
-/*
- *	Range of parameters
- */
-
-struct	iw_range
-{
-	/* Informative stuff (to choose between different interface) */
-	__u32		throughput;	/* To give an idea... */
-	/* In theory this value should be the maximum benchmarked
-	 * TCP/IP throughput, because with most of these devices the
-	 * bit rate is meaningless (overhead an co) to estimate how
-	 * fast the connection will go and pick the fastest one.
-	 * I suggest people to play with Netperf or any benchmark...
-	 */
-
-	/* NWID (or domain id) */
-	__u32		min_nwid;	/* Minimal NWID we are able to set */
-	__u32		max_nwid;	/* Maximal NWID we are able to set */
-
-	/* Old Frequency (backward compat - moved lower ) */
-	__u16		old_num_channels;
-	__u8		old_num_frequency;
-
-	/* Scan capabilities */
-	__u8		scan_capa; 	/* IW_SCAN_CAPA_* bit field */
-
-	/* Wireless event capability bitmasks */
-	__u32		event_capa[6];
-
-	/* signal level threshold range */
-	__s32		sensitivity;
-
-	/* Quality of link & SNR stuff */
-	/* Quality range (link, level, noise)
-	 * If the quality is absolute, it will be in the range [0 ; max_qual],
-	 * if the quality is dBm, it will be in the range [max_qual ; 0].
-	 * Don't forget that we use 8 bit arithmetics... */
-	struct iw_quality	max_qual;	/* Quality of the link */
-	/* This should contain the average/typical values of the quality
-	 * indicator. This should be the threshold between a "good" and
-	 * a "bad" link (example : monitor going from green to orange).
-	 * Currently, user space apps like quality monitors don't have any
-	 * way to calibrate the measurement. With this, they can split
-	 * the range between 0 and max_qual in different quality level
-	 * (using a geometric subdivision centered on the average).
-	 * I expect that people doing the user space apps will feedback
-	 * us on which value we need to put in each driver... */
-	struct iw_quality	avg_qual;	/* Quality of the link */
-
-	/* Rates */
-	__u8		num_bitrates;	/* Number of entries in the list */
-	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
-
-	/* RTS threshold */
-	__s32		min_rts;	/* Minimal RTS threshold */
-	__s32		max_rts;	/* Maximal RTS threshold */
-
-	/* Frag threshold */
-	__s32		min_frag;	/* Minimal frag threshold */
-	__s32		max_frag;	/* Maximal frag threshold */
-
-	/* Power Management duration & timeout */
-	__s32		min_pmp;	/* Minimal PM period */
-	__s32		max_pmp;	/* Maximal PM period */
-	__s32		min_pmt;	/* Minimal PM timeout */
-	__s32		max_pmt;	/* Maximal PM timeout */
-	__u16		pmp_flags;	/* How to decode max/min PM period */
-	__u16		pmt_flags;	/* How to decode max/min PM timeout */
-	__u16		pm_capa;	/* What PM options are supported */
-
-	/* Encoder stuff */
-	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
-	__u8	num_encoding_sizes;	/* Number of entry in the list */
-	__u8	max_encoding_tokens;	/* Max number of tokens */
-	/* For drivers that need a "login/passwd" form */
-	__u8	encoding_login_index;	/* token index for login token */
-
-	/* Transmit power */
-	__u16		txpower_capa;	/* What options are supported */
-	__u8		num_txpower;	/* Number of entries in the list */
-	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
-
-	/* Wireless Extension version info */
-	__u8		we_version_compiled;	/* Must be WIRELESS_EXT */
-	__u8		we_version_source;	/* Last update of source */
-
-	/* Retry limits and lifetime */
-	__u16		retry_capa;	/* What retry options are supported */
-	__u16		retry_flags;	/* How to decode max/min retry limit */
-	__u16		r_time_flags;	/* How to decode max/min retry life */
-	__s32		min_retry;	/* Minimal number of retries */
-	__s32		max_retry;	/* Maximal number of retries */
-	__s32		min_r_time;	/* Minimal retry lifetime */
-	__s32		max_r_time;	/* Maximal retry lifetime */
-
-	/* Frequency */
-	__u16		num_channels;	/* Number of channels [0; num - 1] */
-	__u8		num_frequency;	/* Number of entry in the list */
-	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
-	/* Note : this frequency list doesn't need to fit channel numbers,
-	 * because each entry contain its channel index */
-
-	__u32		enc_capa;	/* IW_ENC_CAPA_* bit field */
-};
-
-/*
- * Private ioctl interface information
- */
- 
-struct	iw_priv_args
-{
-	__u32		cmd;		/* Number of the ioctl to issue */
-	__u16		set_args;	/* Type and number of args */
-	__u16		get_args;	/* Type and number of args */
-	char		name[IFNAMSIZ];	/* Name of the extension */
-};
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/*
- * Wireless events are carried through the rtnetlink socket to user
- * space. They are encapsulated in the IFLA_WIRELESS field of
- * a RTM_NEWLINK message.
- */
-
-/*
- * A Wireless Event. Contains basically the same data as the ioctl...
- */
-struct iw_event
-{
-	__u16		len;			/* Real length of this stuff */
-	__u16		cmd;			/* Wireless IOCTL */
-	union iwreq_data	u;		/* IOCTL fixed payload */
-};
-
-/* Size of the Event prefix (including padding and alignement junk) */
-#define IW_EV_LCP_LEN	(sizeof(struct iw_event) - sizeof(union iwreq_data))
-/* Size of the various events */
-#define IW_EV_CHAR_LEN	(IW_EV_LCP_LEN + IFNAMSIZ)
-#define IW_EV_UINT_LEN	(IW_EV_LCP_LEN + sizeof(__u32))
-#define IW_EV_FREQ_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_LEN	(IW_EV_LCP_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_quality))
-
-/* iw_point events are special. First, the payload (extra data) come at
- * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
- * we omit the pointer, so start at an offset. */
-#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
-			  (char *) NULL)
-#define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point) - \
-			 IW_EV_POINT_OFF)
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 struct __compat_iw_event {
 	__u16		len;			/* Real length of this stuff */
@@ -1146,17 +41,4 @@ struct __compat_iw_event {
 	(IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \
 	 IW_EV_COMPAT_POINT_OFF)
 #endif
-#endif
-
-/* Size of the Event prefix when packed in stream */
-#define IW_EV_LCP_PK_LEN	(4)
-/* Size of the various events when packed in stream */
-#define IW_EV_CHAR_PK_LEN	(IW_EV_LCP_PK_LEN + IFNAMSIZ)
-#define IW_EV_UINT_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(__u32))
-#define IW_EV_FREQ_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
-#define IW_EV_POINT_PK_LEN	(IW_EV_LCP_PK_LEN + 4)
-
 #endif	/* _LINUX_WIRELESS_H */
diff --git a/include/linux/x25.h b/include/linux/x25.h
deleted file mode 100644
index 810cce6737ea..000000000000
--- a/include/linux/x25.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * These are the public elements of the Linux kernel X.25 implementation.
- *
- * 	History
- *	mar/20/00	Daniela Squassoni Disabling/enabling of facilities 
- *					  negotiation.
- *	apr/02/05	Shaun Pereira Selective sub address matching with
- *					call user data
- */
-
-#ifndef	X25_KERNEL_H
-#define	X25_KERNEL_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-#define	SIOCX25GSUBSCRIP	(SIOCPROTOPRIVATE + 0)
-#define	SIOCX25SSUBSCRIP	(SIOCPROTOPRIVATE + 1)
-#define	SIOCX25GFACILITIES	(SIOCPROTOPRIVATE + 2)
-#define	SIOCX25SFACILITIES	(SIOCPROTOPRIVATE + 3)
-#define	SIOCX25GCALLUSERDATA	(SIOCPROTOPRIVATE + 4)
-#define	SIOCX25SCALLUSERDATA	(SIOCPROTOPRIVATE + 5)
-#define	SIOCX25GCAUSEDIAG	(SIOCPROTOPRIVATE + 6)
-#define SIOCX25SCUDMATCHLEN	(SIOCPROTOPRIVATE + 7)
-#define SIOCX25CALLACCPTAPPRV   (SIOCPROTOPRIVATE + 8)
-#define SIOCX25SENDCALLACCPT    (SIOCPROTOPRIVATE + 9)
-#define SIOCX25GDTEFACILITIES (SIOCPROTOPRIVATE + 10)
-#define SIOCX25SDTEFACILITIES (SIOCPROTOPRIVATE + 11)
-#define SIOCX25SCAUSEDIAG	(SIOCPROTOPRIVATE + 12)
-
-/*
- *	Values for {get,set}sockopt.
- */
-#define	X25_QBITINCL		1
-
-/*
- *	X.25 Packet Size values.
- */
-#define	X25_PS16		4
-#define	X25_PS32		5
-#define	X25_PS64		6
-#define	X25_PS128		7
-#define	X25_PS256		8
-#define	X25_PS512		9
-#define	X25_PS1024		10
-#define	X25_PS2048		11
-#define	X25_PS4096		12
-
-/*
- * An X.121 address, it is held as ASCII text, null terminated, up to 15
- * digits and a null terminator.
- */
-struct x25_address {
-	char x25_addr[16];
-};
-
-/*
- *	Linux X.25 Address structure, used for bind, and connect mostly.
- */
-struct sockaddr_x25 {
-	__kernel_sa_family_t sx25_family;	/* Must be AF_X25 */
-	struct x25_address sx25_addr;		/* X.121 Address */
-};
-
-/*
- *	DTE/DCE subscription options.
- *
- *      As this is missing lots of options, user should expect major
- *	changes of this structure in 2.5.x which might break compatibilty.
- *      The somewhat ugly dimension 200-sizeof() is needed to maintain
- *	backward compatibility.
- */
-struct x25_subscrip_struct {
-	char device[200-sizeof(unsigned long)];
-	unsigned long	global_facil_mask;	/* 0 to disable negotiation */
-	unsigned int	extended;
-};
-
-/* values for above global_facil_mask */
-
-#define	X25_MASK_REVERSE	0x01	
-#define	X25_MASK_THROUGHPUT	0x02
-#define	X25_MASK_PACKET_SIZE	0x04
-#define	X25_MASK_WINDOW_SIZE	0x08
-
-#define X25_MASK_CALLING_AE 0x10
-#define X25_MASK_CALLED_AE 0x20
-
-
-/*
- *	Routing table control structure.
- */
-struct x25_route_struct {
-	struct x25_address address;
-	unsigned int	   sigdigits;
-	char		   device[200];
-};
-
-/*
- *	Facilities structure.
- */
-struct x25_facilities {
-	unsigned int	winsize_in, winsize_out;
-	unsigned int	pacsize_in, pacsize_out;
-	unsigned int	throughput;
-	unsigned int	reverse;
-};
-
-/*
-* ITU DTE facilities
-* Only the called and calling address
-* extension are currently implemented.
-* The rest are in place to avoid the struct
-* changing size if someone needs them later
-*/
-
-struct x25_dte_facilities {
-	__u16 delay_cumul;
-	__u16 delay_target;
-	__u16 delay_max;
-	__u8 min_throughput;
-	__u8 expedited;
-	__u8 calling_len;
-	__u8 called_len;
-	__u8 calling_ae[20];
-	__u8 called_ae[20];
-};
-
-/*
- *	Call User Data structure.
- */
-struct x25_calluserdata {
-	unsigned int	cudlength;
-	unsigned char	cuddata[128];
-};
-
-/*
- *	Call clearing Cause and Diagnostic structure.
- */
-struct x25_causediag {
-	unsigned char	cause;
-	unsigned char	diagnostic;
-};
-
-/*
- *	Further optional call user data match length selection
- */
-struct x25_subaddr {
-	unsigned int cudmatchlength;
-};
-
-#endif
diff --git a/include/linux/xattr.h b/include/linux/xattr.h
index cc13e1115970..fdbafc6841cf 100644
--- a/include/linux/xattr.h
+++ b/include/linux/xattr.h
@@ -10,61 +10,11 @@
 #ifndef _LINUX_XATTR_H
 #define _LINUX_XATTR_H
 
-#define XATTR_CREATE	0x1	/* set value, fail if attr already exists */
-#define XATTR_REPLACE	0x2	/* set value, fail if attr does not exist */
-
-/* Namespaces */
-#define XATTR_OS2_PREFIX "os2."
-#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1)
-
-#define XATTR_SECURITY_PREFIX	"security."
-#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1)
-
-#define XATTR_SYSTEM_PREFIX "system."
-#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1)
-
-#define XATTR_TRUSTED_PREFIX "trusted."
-#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1)
-
-#define XATTR_USER_PREFIX "user."
-#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
-
-/* Security namespace */
-#define XATTR_EVM_SUFFIX "evm"
-#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX
-
-#define XATTR_IMA_SUFFIX "ima"
-#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX
-
-#define XATTR_SELINUX_SUFFIX "selinux"
-#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
-
-#define XATTR_SMACK_SUFFIX "SMACK64"
-#define XATTR_SMACK_IPIN "SMACK64IPIN"
-#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
-#define XATTR_SMACK_EXEC "SMACK64EXEC"
-#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE"
-#define XATTR_SMACK_MMAP "SMACK64MMAP"
-#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
-#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
-#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
-#define XATTR_NAME_SMACKEXEC	XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC
-#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE
-#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP
-
-#define XATTR_CAPS_SUFFIX "capability"
-#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
-
-#define XATTR_POSIX_ACL_ACCESS  "posix_acl_access"
-#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS
-#define XATTR_POSIX_ACL_DEFAULT  "posix_acl_default"
-#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT
-
-#ifdef  __KERNEL__
 
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/spinlock.h>
+#include <uapi/linux/xattr.h>
 
 struct inode;
 struct dentry;
@@ -147,6 +97,4 @@ ssize_t simple_xattr_list(struct simple_xattrs *xattrs, char *buffer,
 void simple_xattr_list_add(struct simple_xattrs *xattrs,
 			   struct simple_xattr *new_xattr);
 
-#endif  /*  __KERNEL__  */
-
 #endif	/* _LINUX_XATTR_H */
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
deleted file mode 100644
index 28e493b5b94c..000000000000
--- a/include/linux/xfrm.h
+++ /dev/null
@@ -1,506 +0,0 @@
-#ifndef _LINUX_XFRM_H
-#define _LINUX_XFRM_H
-
-#include <linux/types.h>
-
-/* All of the structures in this file may not change size as they are
- * passed into the kernel from userspace via netlink sockets.
- */
-
-/* Structure to encapsulate addresses. I do not want to use
- * "standard" structure. My apologies.
- */
-typedef union {
-	__be32		a4;
-	__be32		a6[4];
-} xfrm_address_t;
-
-/* Ident of a specific xfrm_state. It is used on input to lookup
- * the state by (spi,daddr,ah/esp) or to store information about
- * spi, protocol and tunnel address on output.
- */
-struct xfrm_id {
-	xfrm_address_t	daddr;
-	__be32		spi;
-	__u8		proto;
-};
-
-struct xfrm_sec_ctx {
-	__u8	ctx_doi;
-	__u8	ctx_alg;
-	__u16	ctx_len;
-	__u32	ctx_sid;
-	char	ctx_str[0];
-};
-
-/* Security Context Domains of Interpretation */
-#define XFRM_SC_DOI_RESERVED 0
-#define XFRM_SC_DOI_LSM 1
-
-/* Security Context Algorithms */
-#define XFRM_SC_ALG_RESERVED 0
-#define XFRM_SC_ALG_SELINUX 1
-
-/* Selector, used as selector both on policy rules (SPD) and SAs. */
-
-struct xfrm_selector {
-	xfrm_address_t	daddr;
-	xfrm_address_t	saddr;
-	__be16	dport;
-	__be16	dport_mask;
-	__be16	sport;
-	__be16	sport_mask;
-	__u16	family;
-	__u8	prefixlen_d;
-	__u8	prefixlen_s;
-	__u8	proto;
-	int	ifindex;
-	__kernel_uid32_t	user;
-};
-
-#define XFRM_INF (~(__u64)0)
-
-struct xfrm_lifetime_cfg {
-	__u64	soft_byte_limit;
-	__u64	hard_byte_limit;
-	__u64	soft_packet_limit;
-	__u64	hard_packet_limit;
-	__u64	soft_add_expires_seconds;
-	__u64	hard_add_expires_seconds;
-	__u64	soft_use_expires_seconds;
-	__u64	hard_use_expires_seconds;
-};
-
-struct xfrm_lifetime_cur {
-	__u64	bytes;
-	__u64	packets;
-	__u64	add_time;
-	__u64	use_time;
-};
-
-struct xfrm_replay_state {
-	__u32	oseq;
-	__u32	seq;
-	__u32	bitmap;
-};
-
-#define XFRMA_REPLAY_ESN_MAX	4096
-
-struct xfrm_replay_state_esn {
-	unsigned int	bmp_len;
-	__u32		oseq;
-	__u32		seq;
-	__u32		oseq_hi;
-	__u32		seq_hi;
-	__u32		replay_window;
-	__u32		bmp[0];
-};
-
-struct xfrm_algo {
-	char		alg_name[64];
-	unsigned int	alg_key_len;    /* in bits */
-	char		alg_key[0];
-};
-
-struct xfrm_algo_auth {
-	char		alg_name[64];
-	unsigned int	alg_key_len;    /* in bits */
-	unsigned int	alg_trunc_len;  /* in bits */
-	char		alg_key[0];
-};
-
-struct xfrm_algo_aead {
-	char		alg_name[64];
-	unsigned int	alg_key_len;	/* in bits */
-	unsigned int	alg_icv_len;	/* in bits */
-	char		alg_key[0];
-};
-
-struct xfrm_stats {
-	__u32	replay_window;
-	__u32	replay;
-	__u32	integrity_failed;
-};
-
-enum {
-	XFRM_POLICY_TYPE_MAIN	= 0,
-	XFRM_POLICY_TYPE_SUB	= 1,
-	XFRM_POLICY_TYPE_MAX	= 2,
-	XFRM_POLICY_TYPE_ANY	= 255
-};
-
-enum {
-	XFRM_POLICY_IN	= 0,
-	XFRM_POLICY_OUT	= 1,
-	XFRM_POLICY_FWD	= 2,
-	XFRM_POLICY_MASK = 3,
-	XFRM_POLICY_MAX	= 3
-};
-
-enum {
-	XFRM_SHARE_ANY,		/* No limitations */
-	XFRM_SHARE_SESSION,	/* For this session only */
-	XFRM_SHARE_USER,	/* For this user only */
-	XFRM_SHARE_UNIQUE	/* Use once */
-};
-
-#define XFRM_MODE_TRANSPORT 0
-#define XFRM_MODE_TUNNEL 1
-#define XFRM_MODE_ROUTEOPTIMIZATION 2
-#define XFRM_MODE_IN_TRIGGER 3
-#define XFRM_MODE_BEET 4
-#define XFRM_MODE_MAX 5
-
-/* Netlink configuration messages.  */
-enum {
-	XFRM_MSG_BASE = 0x10,
-
-	XFRM_MSG_NEWSA = 0x10,
-#define XFRM_MSG_NEWSA XFRM_MSG_NEWSA
-	XFRM_MSG_DELSA,
-#define XFRM_MSG_DELSA XFRM_MSG_DELSA
-	XFRM_MSG_GETSA,
-#define XFRM_MSG_GETSA XFRM_MSG_GETSA
-
-	XFRM_MSG_NEWPOLICY,
-#define XFRM_MSG_NEWPOLICY XFRM_MSG_NEWPOLICY
-	XFRM_MSG_DELPOLICY,
-#define XFRM_MSG_DELPOLICY XFRM_MSG_DELPOLICY
-	XFRM_MSG_GETPOLICY,
-#define XFRM_MSG_GETPOLICY XFRM_MSG_GETPOLICY
-
-	XFRM_MSG_ALLOCSPI,
-#define XFRM_MSG_ALLOCSPI XFRM_MSG_ALLOCSPI
-	XFRM_MSG_ACQUIRE,
-#define XFRM_MSG_ACQUIRE XFRM_MSG_ACQUIRE
-	XFRM_MSG_EXPIRE,
-#define XFRM_MSG_EXPIRE XFRM_MSG_EXPIRE
-
-	XFRM_MSG_UPDPOLICY,
-#define XFRM_MSG_UPDPOLICY XFRM_MSG_UPDPOLICY
-	XFRM_MSG_UPDSA,
-#define XFRM_MSG_UPDSA XFRM_MSG_UPDSA
-
-	XFRM_MSG_POLEXPIRE,
-#define XFRM_MSG_POLEXPIRE XFRM_MSG_POLEXPIRE
-
-	XFRM_MSG_FLUSHSA,
-#define XFRM_MSG_FLUSHSA XFRM_MSG_FLUSHSA
-	XFRM_MSG_FLUSHPOLICY,
-#define XFRM_MSG_FLUSHPOLICY XFRM_MSG_FLUSHPOLICY
-
-	XFRM_MSG_NEWAE,
-#define XFRM_MSG_NEWAE XFRM_MSG_NEWAE
-	XFRM_MSG_GETAE,
-#define XFRM_MSG_GETAE XFRM_MSG_GETAE
-
-	XFRM_MSG_REPORT,
-#define XFRM_MSG_REPORT XFRM_MSG_REPORT
-
-	XFRM_MSG_MIGRATE,
-#define XFRM_MSG_MIGRATE XFRM_MSG_MIGRATE
-
-	XFRM_MSG_NEWSADINFO,
-#define XFRM_MSG_NEWSADINFO XFRM_MSG_NEWSADINFO
-	XFRM_MSG_GETSADINFO,
-#define XFRM_MSG_GETSADINFO XFRM_MSG_GETSADINFO
-
-	XFRM_MSG_NEWSPDINFO,
-#define XFRM_MSG_NEWSPDINFO XFRM_MSG_NEWSPDINFO
-	XFRM_MSG_GETSPDINFO,
-#define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO
-
-	XFRM_MSG_MAPPING,
-#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING
-	__XFRM_MSG_MAX
-};
-#define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1)
-
-#define XFRM_NR_MSGTYPES (XFRM_MSG_MAX + 1 - XFRM_MSG_BASE)
-
-/*
- * Generic LSM security context for comunicating to user space
- * NOTE: Same format as sadb_x_sec_ctx
- */
-struct xfrm_user_sec_ctx {
-	__u16			len;
-	__u16			exttype;
-	__u8			ctx_alg;  /* LSMs: e.g., selinux == 1 */
-	__u8			ctx_doi;
-	__u16			ctx_len;
-};
-
-struct xfrm_user_tmpl {
-	struct xfrm_id		id;
-	__u16			family;
-	xfrm_address_t		saddr;
-	__u32			reqid;
-	__u8			mode;
-	__u8			share;
-	__u8			optional;
-	__u32			aalgos;
-	__u32			ealgos;
-	__u32			calgos;
-};
-
-struct xfrm_encap_tmpl {
-	__u16		encap_type;
-	__be16		encap_sport;
-	__be16		encap_dport;
-	xfrm_address_t	encap_oa;
-};
-
-/* AEVENT flags  */
-enum xfrm_ae_ftype_t {
-	XFRM_AE_UNSPEC,
-	XFRM_AE_RTHR=1,	/* replay threshold*/
-	XFRM_AE_RVAL=2, /* replay value */
-	XFRM_AE_LVAL=4, /* lifetime value */
-	XFRM_AE_ETHR=8, /* expiry timer threshold */
-	XFRM_AE_CR=16, /* Event cause is replay update */
-	XFRM_AE_CE=32, /* Event cause is timer expiry */
-	XFRM_AE_CU=64, /* Event cause is policy update */
-	__XFRM_AE_MAX
-
-#define XFRM_AE_MAX (__XFRM_AE_MAX - 1)
-};
-
-struct xfrm_userpolicy_type {
-	__u8		type;
-	__u16		reserved1;
-	__u8		reserved2;
-};
-
-/* Netlink message attributes.  */
-enum xfrm_attr_type_t {
-	XFRMA_UNSPEC,
-	XFRMA_ALG_AUTH,		/* struct xfrm_algo */
-	XFRMA_ALG_CRYPT,	/* struct xfrm_algo */
-	XFRMA_ALG_COMP,		/* struct xfrm_algo */
-	XFRMA_ENCAP,		/* struct xfrm_algo + struct xfrm_encap_tmpl */
-	XFRMA_TMPL,		/* 1 or more struct xfrm_user_tmpl */
-	XFRMA_SA,		/* struct xfrm_usersa_info  */
-	XFRMA_POLICY,		/*struct xfrm_userpolicy_info */
-	XFRMA_SEC_CTX,		/* struct xfrm_sec_ctx */
-	XFRMA_LTIME_VAL,
-	XFRMA_REPLAY_VAL,
-	XFRMA_REPLAY_THRESH,
-	XFRMA_ETIMER_THRESH,
-	XFRMA_SRCADDR,		/* xfrm_address_t */
-	XFRMA_COADDR,		/* xfrm_address_t */
-	XFRMA_LASTUSED,		/* unsigned long  */
-	XFRMA_POLICY_TYPE,	/* struct xfrm_userpolicy_type */
-	XFRMA_MIGRATE,
-	XFRMA_ALG_AEAD,		/* struct xfrm_algo_aead */
-	XFRMA_KMADDRESS,        /* struct xfrm_user_kmaddress */
-	XFRMA_ALG_AUTH_TRUNC,	/* struct xfrm_algo_auth */
-	XFRMA_MARK,		/* struct xfrm_mark */
-	XFRMA_TFCPAD,		/* __u32 */
-	XFRMA_REPLAY_ESN_VAL,	/* struct xfrm_replay_esn */
-	__XFRMA_MAX
-
-#define XFRMA_MAX (__XFRMA_MAX - 1)
-};
-
-struct xfrm_mark {
-	__u32           v; /* value */
-	__u32           m; /* mask */
-};
-
-enum xfrm_sadattr_type_t {
-	XFRMA_SAD_UNSPEC,
-	XFRMA_SAD_CNT,
-	XFRMA_SAD_HINFO,
-	__XFRMA_SAD_MAX
-
-#define XFRMA_SAD_MAX (__XFRMA_SAD_MAX - 1)
-};
-
-struct xfrmu_sadhinfo {
-	__u32 sadhcnt; /* current hash bkts */
-	__u32 sadhmcnt; /* max allowed hash bkts */
-};
-
-enum xfrm_spdattr_type_t {
-	XFRMA_SPD_UNSPEC,
-	XFRMA_SPD_INFO,
-	XFRMA_SPD_HINFO,
-	__XFRMA_SPD_MAX
-
-#define XFRMA_SPD_MAX (__XFRMA_SPD_MAX - 1)
-};
-
-struct xfrmu_spdinfo {
-	__u32 incnt;
-	__u32 outcnt;
-	__u32 fwdcnt;
-	__u32 inscnt;
-	__u32 outscnt;
-	__u32 fwdscnt;
-};
-
-struct xfrmu_spdhinfo {
-	__u32 spdhcnt;
-	__u32 spdhmcnt;
-};
-
-struct xfrm_usersa_info {
-	struct xfrm_selector		sel;
-	struct xfrm_id			id;
-	xfrm_address_t			saddr;
-	struct xfrm_lifetime_cfg	lft;
-	struct xfrm_lifetime_cur	curlft;
-	struct xfrm_stats		stats;
-	__u32				seq;
-	__u32				reqid;
-	__u16				family;
-	__u8				mode;		/* XFRM_MODE_xxx */
-	__u8				replay_window;
-	__u8				flags;
-#define XFRM_STATE_NOECN	1
-#define XFRM_STATE_DECAP_DSCP	2
-#define XFRM_STATE_NOPMTUDISC	4
-#define XFRM_STATE_WILDRECV	8
-#define XFRM_STATE_ICMP		16
-#define XFRM_STATE_AF_UNSPEC	32
-#define XFRM_STATE_ALIGN4	64
-#define XFRM_STATE_ESN		128
-};
-
-struct xfrm_usersa_id {
-	xfrm_address_t			daddr;
-	__be32				spi;
-	__u16				family;
-	__u8				proto;
-};
-
-struct xfrm_aevent_id {
-	struct xfrm_usersa_id		sa_id;
-	xfrm_address_t			saddr;
-	__u32				flags;
-	__u32				reqid;
-};
-
-struct xfrm_userspi_info {
-	struct xfrm_usersa_info		info;
-	__u32				min;
-	__u32				max;
-};
-
-struct xfrm_userpolicy_info {
-	struct xfrm_selector		sel;
-	struct xfrm_lifetime_cfg	lft;
-	struct xfrm_lifetime_cur	curlft;
-	__u32				priority;
-	__u32				index;
-	__u8				dir;
-	__u8				action;
-#define XFRM_POLICY_ALLOW	0
-#define XFRM_POLICY_BLOCK	1
-	__u8				flags;
-#define XFRM_POLICY_LOCALOK	1	/* Allow user to override global policy */
-	/* Automatically expand selector to include matching ICMP payloads. */
-#define XFRM_POLICY_ICMP	2
-	__u8				share;
-};
-
-struct xfrm_userpolicy_id {
-	struct xfrm_selector		sel;
-	__u32				index;
-	__u8				dir;
-};
-
-struct xfrm_user_acquire {
-	struct xfrm_id			id;
-	xfrm_address_t			saddr;
-	struct xfrm_selector		sel;
-	struct xfrm_userpolicy_info	policy;
-	__u32				aalgos;
-	__u32				ealgos;
-	__u32				calgos;
-	__u32				seq;
-};
-
-struct xfrm_user_expire {
-	struct xfrm_usersa_info		state;
-	__u8				hard;
-};
-
-struct xfrm_user_polexpire {
-	struct xfrm_userpolicy_info	pol;
-	__u8				hard;
-};
-
-struct xfrm_usersa_flush {
-	__u8				proto;
-};
-
-struct xfrm_user_report {
-	__u8				proto;
-	struct xfrm_selector		sel;
-};
-
-/* Used by MIGRATE to pass addresses IKE should use to perform
- * SA negotiation with the peer */
-struct xfrm_user_kmaddress {
-	xfrm_address_t                  local;
-	xfrm_address_t                  remote;
-	__u32				reserved;
-	__u16				family;
-};
-
-struct xfrm_user_migrate {
-	xfrm_address_t			old_daddr;
-	xfrm_address_t			old_saddr;
-	xfrm_address_t			new_daddr;
-	xfrm_address_t			new_saddr;
-	__u8				proto;
-	__u8				mode;
-	__u16				reserved;
-	__u32				reqid;
-	__u16				old_family;
-	__u16				new_family;
-};
-
-struct xfrm_user_mapping {
-	struct xfrm_usersa_id		id;
-	__u32				reqid;
-	xfrm_address_t			old_saddr;
-	xfrm_address_t			new_saddr;
-	__be16				old_sport;
-	__be16				new_sport;
-};
-
-#ifndef __KERNEL__
-/* backwards compatibility for userspace */
-#define XFRMGRP_ACQUIRE		1
-#define XFRMGRP_EXPIRE		2
-#define XFRMGRP_SA		4
-#define XFRMGRP_POLICY		8
-#define XFRMGRP_REPORT		0x20
-#endif
-
-enum xfrm_nlgroups {
-	XFRMNLGRP_NONE,
-#define XFRMNLGRP_NONE		XFRMNLGRP_NONE
-	XFRMNLGRP_ACQUIRE,
-#define XFRMNLGRP_ACQUIRE	XFRMNLGRP_ACQUIRE
-	XFRMNLGRP_EXPIRE,
-#define XFRMNLGRP_EXPIRE	XFRMNLGRP_EXPIRE
-	XFRMNLGRP_SA,
-#define XFRMNLGRP_SA		XFRMNLGRP_SA
-	XFRMNLGRP_POLICY,
-#define XFRMNLGRP_POLICY	XFRMNLGRP_POLICY
-	XFRMNLGRP_AEVENTS,
-#define XFRMNLGRP_AEVENTS	XFRMNLGRP_AEVENTS
-	XFRMNLGRP_REPORT,
-#define XFRMNLGRP_REPORT	XFRMNLGRP_REPORT
-	XFRMNLGRP_MIGRATE,
-#define XFRMNLGRP_MIGRATE	XFRMNLGRP_MIGRATE
-	XFRMNLGRP_MAPPING,
-#define XFRMNLGRP_MAPPING	XFRMNLGRP_MAPPING
-	__XFRMNLGRP_MAX
-};
-#define XFRMNLGRP_MAX	(__XFRMNLGRP_MAX - 1)
-
-#endif /* _LINUX_XFRM_H */