Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (115 commits)
  EHCI: fix direction handling for interrupt data toggles
  USB: serial: add IDs for WinChipHead USB->RS232 adapter
  USB: OHCI: fix another regression for NVIDIA controllers
  usb: gadget: m66592-udc: add pullup function
  usb: gadget: m66592-udc: add function for external controller
  usb: gadget: r8a66597-udc: add pullup function
  usb: renesas_usbhs: support multi driver
  usb: renesas_usbhs: inaccessible pipe is not an error
  usb: renesas_usbhs: care buff alignment when dma handler
  USB: PL2303: correctly handle baudrates above 115200
  usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift
  usb: renesas_usbhs: compile/config are rescued
  usb: renesas_usbhs: fixup comment-out
  usb: update email address in ohci-sh and r8a66597-hcd
  usb: r8a66597-hcd: add function for external controller
  EHCI: only power off port if over-current is active
  USB: mon: Allow to use usbmon without debugfs
  USB: EHCI: go back to using the system clock for QH unlinks
  ehci: add pci quirk for Ordissimo and RM Slate 100 too
  ehci: refactor pci quirk to use standard dmi_check_system method
  ...

Fix up trivial conflicts in Documentation/feature-removal-schedule.txt

5 files changed, 117 insertions, 30 deletions

diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index b78cba466d3d..a316fba73518 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -59,6 +59,10 @@ struct usb_configuration;
  * @hs_descriptors: Table of high speed descriptors, using interface and
  *	string identifiers assigned during @bind().  If this pointer is null,
  *	the function will not be available at high speed.
+ * @ss_descriptors: Table of super speed descriptors, using interface and
+ *	string identifiers assigned during @bind(). If this
+ *	pointer is null after initiation, the function will not
+ *	be available at super speed.
  * @config: assigned when @usb_add_function() is called; this is the
  *	configuration with which this function is associated.
  * @bind: Before the gadget can register, all of its functions bind() to the
@@ -77,6 +81,10 @@ struct usb_configuration;
  * @setup: Used for interface-specific control requests.
  * @suspend: Notifies functions when the host stops sending USB traffic.
  * @resume: Notifies functions when the host restarts USB traffic.
+ * @get_status: Returns function status as a reply to
+ *	GetStatus() request when the recepient is Interface.
+ * @func_suspend: callback to be called when
+ *	SetFeature(FUNCTION_SUSPEND) is reseived
  *
  * A single USB function uses one or more interfaces, and should in most
  * cases support operation at both full and high speeds.  Each function is
@@ -106,6 +114,7 @@ struct usb_function {
 	struct usb_gadget_strings	**strings;
 	struct usb_descriptor_header	**descriptors;
 	struct usb_descriptor_header	**hs_descriptors;
+	struct usb_descriptor_header	**ss_descriptors;
 
 	struct usb_configuration	*config;
 
@@ -132,6 +141,10 @@ struct usb_function {
 	void			(*suspend)(struct usb_function *);
 	void			(*resume)(struct usb_function *);
 
+	/* USB 3.0 additions */
+	int			(*get_status)(struct usb_function *);
+	int			(*func_suspend)(struct usb_function *,
+						u8 suspend_opt);
 	/* private: */
 	/* internals */
 	struct list_head		list;
@@ -145,20 +158,8 @@ int usb_function_activate(struct usb_function *);
 
 int usb_interface_id(struct usb_configuration *, struct usb_function *);
 
-/**
- * ep_choose - select descriptor endpoint at current device speed
- * @g: gadget, connected and running at some speed
- * @hs: descriptor to use for high speed operation
- * @fs: descriptor to use for full or low speed operation
- */
-static inline struct usb_endpoint_descriptor *
-ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
-		struct usb_endpoint_descriptor *fs)
-{
-	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
-		return hs;
-	return fs;
-}
+int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f,
+			struct usb_ep *_ep);
 
 #define	MAX_CONFIG_INTERFACES		16	/* arbitrary; max 255 */
 
@@ -231,6 +232,7 @@ struct usb_configuration {
 	struct list_head	list;
 	struct list_head	functions;
 	u8			next_interface_id;
+	unsigned		superspeed:1;
 	unsigned		highspeed:1;
 	unsigned		fullspeed:1;
 	struct usb_function	*interface[MAX_CONFIG_INTERFACES];
@@ -252,6 +254,7 @@ int usb_add_config(struct usb_composite_dev *,
  *	identifiers.
  * @strings: tables of strings, keyed by identifiers assigned during bind()
  *	and language IDs provided in control requests
+ * @max_speed: Highest speed the driver supports.
  * @needs_serial: set to 1 if the gadget needs userspace to provide
  * 	a serial number.  If one is not provided, warning will be printed.
  * @unbind: Reverses bind; called as a side effect of unregistering
@@ -279,6 +282,7 @@ struct usb_composite_driver {
 	const char				*iManufacturer;
 	const struct usb_device_descriptor	*dev;
 	struct usb_gadget_strings		**strings;
+	enum usb_device_speed			max_speed;
 	unsigned		needs_serial:1;
 
 	int			(*unbind)(struct usb_composite_dev *);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index dd1571db55e7..087f4b931833 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -15,7 +15,13 @@
 #ifndef __LINUX_USB_GADGET_H
 #define __LINUX_USB_GADGET_H
 
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
 
 struct usb_ep;
 
@@ -27,6 +33,7 @@ struct usb_ep;
  *	field, and the usb controller needs one, it is responsible
  *	for mapping and unmapping the buffer.
  * @length: Length of that data
+ * @stream_id: The stream id, when USB3.0 bulk streams are being used
  * @no_interrupt: If true, hints that no completion irq is needed.
  *	Helpful sometimes with deep request queues that are handled
  *	directly by DMA controllers.
@@ -81,6 +88,7 @@ struct usb_request {
 	unsigned		length;
 	dma_addr_t		dma;
 
+	unsigned		stream_id:16;
 	unsigned		no_interrupt:1;
 	unsigned		zero:1;
 	unsigned		short_not_ok:1;
@@ -131,8 +139,17 @@ struct usb_ep_ops {
  * @maxpacket:The maximum packet size used on this endpoint.  The initial
  *	value can sometimes be reduced (hardware allowing), according to
  *      the endpoint descriptor used to configure the endpoint.
- * @driver_data:for use by the gadget driver.  all other fields are
- *	read-only to gadget drivers.
+ * @max_streams: The maximum number of streams supported
+ *	by this EP (0 - 16, actual number is 2^n)
+ * @mult: multiplier, 'mult' value for SS Isoc EPs
+ * @maxburst: the maximum number of bursts supported by this EP (for usb3)
+ * @driver_data:for use by the gadget driver.
+ * @address: used to identify the endpoint when finding descriptor that
+ *	matches connection speed
+ * @desc: endpoint descriptor.  This pointer is set before the endpoint is
+ *	enabled and remains valid until the endpoint is disabled.
+ * @comp_desc: In case of SuperSpeed support, this is the endpoint companion
+ *	descriptor that is used to configure the endpoint
  *
  * the bus controller driver lists all the general purpose endpoints in
  * gadget->ep_list.  the control endpoint (gadget->ep0) is not in that list,
@@ -145,6 +162,12 @@ struct usb_ep {
 	const struct usb_ep_ops	*ops;
 	struct list_head	ep_list;
 	unsigned		maxpacket:16;
+	unsigned		max_streams:16;
+	unsigned		mult:2;
+	unsigned		maxburst:4;
+	u8			address;
+	const struct usb_endpoint_descriptor	*desc;
+	const struct usb_ss_ep_comp_descriptor	*comp_desc;
 };
 
 /*-------------------------------------------------------------------------*/
@@ -153,11 +176,8 @@ struct usb_ep {
  * usb_ep_enable - configure endpoint, making it usable
  * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
  *	drivers discover endpoints through the ep_list of a usb_gadget.
- * @desc:descriptor for desired behavior.  caller guarantees this pointer
- *	remains valid until the endpoint is disabled; the data byte order
- *	is little-endian (usb-standard).
  *
- * when configurations are set, or when interface settings change, the driver
+ * When configurations are set, or when interface settings change, the driver
  * will enable or disable the relevant endpoints.  while it is enabled, an
  * endpoint may be used for i/o until the driver receives a disconnect() from
  * the host or until the endpoint is disabled.
@@ -172,10 +192,9 @@ struct usb_ep {
  *
  * returns zero, or a negative error code.
  */
-static inline int usb_ep_enable(struct usb_ep *ep,
-				const struct usb_endpoint_descriptor *desc)
+static inline int usb_ep_enable(struct usb_ep *ep)
 {
-	return ep->ops->enable(ep, desc);
+	return ep->ops->enable(ep, ep->desc);
 }
 
 /**
@@ -416,7 +435,16 @@ static inline void usb_ep_fifo_flush(struct usb_ep *ep)
 
 /*-------------------------------------------------------------------------*/
 
+struct usb_dcd_config_params {
+	__u8  bU1devExitLat;	/* U1 Device exit Latency */
+#define USB_DEFULT_U1_DEV_EXIT_LAT	0x01	/* Less then 1 microsec */
+	__le16 bU2DevExitLat;	/* U2 Device exit Latency */
+#define USB_DEFULT_U2_DEV_EXIT_LAT	0x1F4	/* Less then 500 microsec */
+};
+
+
 struct usb_gadget;
+struct usb_gadget_driver;
 
 /* the rest of the api to the controller hardware: device operations,
  * which don't involve endpoints (or i/o).
@@ -430,6 +458,16 @@ struct usb_gadget_ops {
 	int	(*pullup) (struct usb_gadget *, int is_on);
 	int	(*ioctl)(struct usb_gadget *,
 				unsigned code, unsigned long param);
+	void	(*get_config_params)(struct usb_dcd_config_params *);
+	int	(*udc_start)(struct usb_gadget *,
+			struct usb_gadget_driver *);
+	int	(*udc_stop)(struct usb_gadget *,
+			struct usb_gadget_driver *);
+
+	/* Those two are deprecated */
+	int	(*start)(struct usb_gadget_driver *,
+			int (*bind)(struct usb_gadget *));
+	int	(*stop)(struct usb_gadget_driver *);
 };
 
 /**
@@ -521,6 +559,24 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g)
 }
 
 /**
+ * gadget_is_superspeed() - return true if the hardware handles
+ * supperspeed
+ * @g: controller that might support supper speed
+ */
+static inline int gadget_is_superspeed(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_GADGET_SUPERSPEED
+	/*
+	 * runtime test would check "g->is_superspeed" ... that might be
+	 * useful to work around hardware bugs, but is mostly pointless
+	 */
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+/**
  * gadget_is_otg - return true iff the hardware is OTG-ready
  * @g: controller that might have a Mini-AB connector
  *
@@ -821,6 +877,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
  */
 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);
 
+extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
+extern void usb_del_gadget_udc(struct usb_gadget *gadget);
+
 /*-------------------------------------------------------------------------*/
 
 /* utility to simplify dealing with string descriptors */
@@ -870,12 +929,6 @@ int usb_gadget_config_buf(const struct usb_config_descriptor *config,
 struct usb_descriptor_header **usb_copy_descriptors(
 		struct usb_descriptor_header **);
 
-/* return copy of endpoint descriptor given original descriptor set */
-struct usb_endpoint_descriptor *usb_find_endpoint(
-	struct usb_descriptor_header **src,
-	struct usb_descriptor_header **copy,
-	struct usb_endpoint_descriptor *match);
-
 /**
  * usb_free_descriptors - free descriptors returned by usb_copy_descriptors()
  * @v: vector of descriptors
@@ -892,6 +945,11 @@ static inline void usb_free_descriptors(struct usb_descriptor_header **v)
 extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
 			struct usb_endpoint_descriptor *);
 
+
+extern struct usb_ep *usb_ep_autoconfig_ss(struct usb_gadget *,
+			struct usb_endpoint_descriptor *,
+			struct usb_ss_ep_comp_descriptor *);
+
 extern void usb_ep_autoconfig_reset(struct usb_gadget *);
 
 #endif /* __LINUX_USB_GADGET_H */
diff --git a/include/linux/usb/m66592.h b/include/linux/usb/m66592.h
index cda9625e7df0..a4ba31ab2fed 100644
--- a/include/linux/usb/m66592.h
+++ b/include/linux/usb/m66592.h
@@ -38,6 +38,8 @@ struct m66592_platdata {
 	/* (external controller only) one = 3.3V, zero = 1.5V */
 	unsigned	vif:1;
 
+	/* (external controller only) set one = WR0_N shorted to WR1_N */
+	unsigned	wr0_shorted_to_wr1:1;
 };
 
 #endif /* __LINUX_USB_M66592_H */
diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h
index 26d216734057..b6b8660d0c68 100644
--- a/include/linux/usb/r8a66597.h
+++ b/include/linux/usb/r8a66597.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2009  Renesas Solutions Corp.
  *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -31,6 +31,9 @@ struct r8a66597_platdata {
 	/* This callback can control port power instead of DVSTCTR register. */
 	void (*port_power)(int port, int power);
 
+	/* This parameter is for BUSWAIT */
+	u16		buswait;
+
 	/* set one = on chip controller, set zero = external controller */
 	unsigned	on_chip:1;
 
@@ -42,6 +45,9 @@ struct r8a66597_platdata {
 
 	/* set one = big endian, set zero = little endian */
 	unsigned	endian:1;
+
+	/* (external controller only) set one = WR0_N shorted to WR1_N */
+	unsigned	wr0_shorted_to_wr1:1;
 };
 
 /* Register definitions */
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 3a7f1d982dd6..8977431259c6 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -110,6 +110,23 @@ struct renesas_usbhs_driver_param {
 	 * delay time from notify_hotplug callback
 	 */
 	int detection_delay;
+
+	/*
+	 * option:
+	 *
+	 * dma id for dmaengine
+	 */
+	int d0_tx_id;
+	int d0_rx_id;
+	int d1_tx_id;
+	int d1_rx_id;
+
+	/*
+	 * option:
+	 *
+	 * pio <--> dma border.
+	 */
+	int pio_dma_border; /* default is 64byte */
 };
 
 /*