Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking update from David Miller:

 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP
    timestamp offset.  From Andrey Vagin.

 2) VMWARE VM VSOCK layer, from Andy King.

 3) Much improved support for virtual functions and SR-IOV in bnx2x,
    from Ariel ELior.

 4) All protocols on ipv4 and ipv6 are now network namespace aware, and
    all the compatability checks for initial-namespace-only protocols is
    removed.  Thanks to Tom Parkin for helping deal with the last major
    holdout, L2TP.

 5) IPV6 support in netpoll and network namespace support in pktgen,
    from Cong Wang.

 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration
    Protocol (MVRP) support, from David Ward.

 7) Compute packet lengths more accurately in the packet scheduler, from
    Eric Dumazet.

 8) Use per-task page fragment allocator in skb_append_datato_frags(),
    also from Eric Dumazet.

 9) Add support for connection tracking labels in netfilter, from
    Florian Westphal.

10) Fix default multicast group joining on ipv6, and add anti-spoofing
    checks to 6to4 and 6rd.  From Hannes Frederic Sowa.

11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern
    times, rearrange inet frag datastructures for better cacheline
    locality, and move more operations outside of locking.  From Jesper
    Dangaard Brouer.

12) Instead of strict master <--> slave relationships, allow arbitrary
    scenerios with "upper device lists".  From Jiri Pirko.

13) Improve rate limiting accuracy in TBF and act_police, also from Jiri
    Pirko.

14) Add a BPF filter netfilter match target, from Willem de Bruijn.

15) Orphan and delete a bunch of pre-historic networking drivers from
    Paul Gortmaker.

16) Add TSO support for GRE tunnels, from Pravin B SHelar.  Although
    this still needs some minor bug fixing before it's %100 correct in
    all cases.

17) Handle unresolved IPSEC states like ARP, with a resolution packet
    queue.  From Steffen Klassert.

18) Remove TCP Appropriate Byte Count support (ABC), from Stephen
    Hemminger.  This was long overdue.

19) Support SO_REUSEPORT, from Tom Herbert.

20) Allow locking a socket BPF filter, so that it cannot change after a
    process drops capabilities.

21) Add VLAN filtering to bridge, from Vlad Yasevich.

22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in
    the ipv6 routes, from YOSHIFUJI Hideaki.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits)
  ipv6: fix race condition regarding dst->expires and dst->from.
  net: fix a wrong assignment in skb_split()
  ip_gre: remove an extra dst_release()
  ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
  atl1c: restore buffer state
  net: fix a build failure when !CONFIG_PROC_FS
  net: ipv4: fix waring -Wunused-variable
  net: proc: fix build failed when procfs is not configured
  Revert "xen: netback: remove redundant xenvif_put"
  net: move procfs code to net/core/net-procfs.c
  qmi_wwan, cdc-ether: add ADU960S
  bonding: set sysfs device_type to 'bond'
  bonding: fix bond_release_all inconsistencies
  b44: use netdev_alloc_skb_ip_align()
  xen: netback: remove redundant xenvif_put
  net: fec: Do a sanity check on the gpio number
  ip_gre: propogate target device GSO capability to the tunnel device
  ip_gre: allow CSUM capable devices to handle packets
  bonding: Fix initialize after use for 3ad machine state spinlock
  bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
  ...

1 files changed, 225 insertions, 88 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ee50c5eba50c..f7eba1300d82 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -147,10 +147,12 @@ struct ieee80211_low_level_stats {
  * enum ieee80211_chanctx_change - change flag for channel context
  * @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed
  * @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed
+ * @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed
  */
 enum ieee80211_chanctx_change {
 	IEEE80211_CHANCTX_CHANGE_WIDTH		= BIT(0),
 	IEEE80211_CHANCTX_CHANGE_RX_CHAINS	= BIT(1),
+	IEEE80211_CHANCTX_CHANGE_RADAR		= BIT(2),
 };
 
 /**
@@ -165,6 +167,7 @@ enum ieee80211_chanctx_change {
  * @rx_chains_dynamic: The number of RX chains that must be enabled
  *	after RTS/CTS handshake to receive SMPS MIMO transmissions;
  *	this will always be >= @rx_chains_static.
+ * @radar_enabled: whether radar detection is enabled on this channel.
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void *), size is determined in hw information.
  */
@@ -173,7 +176,9 @@ struct ieee80211_chanctx_conf {
 
 	u8 rx_chains_static, rx_chains_dynamic;
 
-	u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+	bool radar_enabled;
+
+	u8 drv_priv[0] __aligned(sizeof(void *));
 };
 
 /**
@@ -208,6 +213,11 @@ struct ieee80211_chanctx_conf {
  * @BSS_CHANGED_TXPOWER: TX power setting changed for this interface
  * @BSS_CHANGED_P2P_PS: P2P powersave settings (CTWindow, opportunistic PS)
  *	changed (currently only in P2P client mode, GO mode will be later)
+ * @BSS_CHANGED_DTIM_PERIOD: the DTIM period value was changed (set when
+ *	it becomes valid, managed mode only)
+ * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed,
+ *	note that this is only called when it changes after the channel
+ *	context had been assigned.
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -230,6 +240,8 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_PS			= 1<<17,
 	BSS_CHANGED_TXPOWER		= 1<<18,
 	BSS_CHANGED_P2P_PS		= 1<<19,
+	BSS_CHANGED_DTIM_PERIOD		= 1<<20,
+	BSS_CHANGED_BANDWIDTH		= 1<<21,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -271,13 +283,19 @@ enum ieee80211_rssi_event {
  *	if the hardware cannot handle this it must set the
  *	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
  * @dtim_period: num of beacons before the next DTIM, for beaconing,
- *	valid in station mode only while @assoc is true and if also
- *	requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf
- *	@ps_dtim_period)
+ *	valid in station mode only if after the driver was notified
+ *	with the %BSS_CHANGED_DTIM_PERIOD flag, will be non-zero then.
  * @sync_tsf: last beacon's/probe response's TSF timestamp (could be old
- *	as it may have been received during scanning long ago)
+ *	as it may have been received during scanning long ago). If the
+ *	HW flag %IEEE80211_HW_TIMING_BEACON_ONLY is set, then this can
+ *	only come from a beacon, but might not become valid until after
+ *	association when a beacon is received (which is notified with the
+ *	%BSS_CHANGED_DTIM flag.)
  * @sync_device_ts: the device timestamp corresponding to the sync_tsf,
  *	the driver/device can use this to calculate synchronisation
+ *	(see @sync_tsf)
+ * @sync_dtim_count: Only valid when %IEEE80211_HW_TIMING_BEACON_ONLY
+ *	is requested, see @sync_tsf/@sync_device_ts.
  * @beacon_int: beacon interval
  * @assoc_capability: capabilities taken from assoc resp
  * @basic_rates: bitmap of basic rates, each bit stands for an
@@ -297,11 +315,9 @@ enum ieee80211_rssi_event {
  *	may filter ARP queries targeted for other addresses than listed here.
  *	The driver must allow ARP queries targeted for all address listed here
  *	to pass through. An empty list implies no ARP queries need to pass.
- * @arp_addr_cnt: Number of addresses currently on the list.
- * @arp_filter_enabled: Enable ARP filtering - if enabled, the hardware may
- *	filter ARP queries based on the @arp_addr_list, if disabled, the
- *	hardware must not perform any ARP filtering. Note, that the filter will
- *	be enabled also in promiscuous mode.
+ * @arp_addr_cnt: Number of addresses currently on the list. Note that this
+ *	may be larger than %IEEE80211_BSS_ARP_ADDR_LIST_LEN (the arp_addr_list
+ *	array size), it's up to the driver what to do in that case.
  * @qos: This is a QoS-enabled BSS.
  * @idle: This interface is idle. There's also a global idle flag in the
  *	hardware config which may be more appropriate depending on what
@@ -331,6 +347,7 @@ struct ieee80211_bss_conf {
 	u16 assoc_capability;
 	u64 sync_tsf;
 	u32 sync_device_ts;
+	u8 sync_dtim_count;
 	u32 basic_rates;
 	int mcast_rate[IEEE80211_NUM_BANDS];
 	u16 ht_operation_mode;
@@ -338,8 +355,7 @@ struct ieee80211_bss_conf {
 	u32 cqm_rssi_hyst;
 	struct cfg80211_chan_def chandef;
 	__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
-	u8 arp_addr_cnt;
-	bool arp_filter_enabled;
+	int arp_addr_cnt;
 	bool qos;
 	bool idle;
 	bool ps;
@@ -392,6 +408,9 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
  *	set by rate control algorithms to indicate probe rate, will
  *	be cleared for fragmented frames (except on the last fragment)
+ * @IEEE80211_TX_INTFL_OFFCHAN_TX_OK: Internal to mac80211. Used to indicate
+ *	that a frame can be transmitted while the queues are stopped for
+ *	off-channel operation.
  * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
  *	used to indicate that a pending frame requires TX processing before
  *	it can be sent out.
@@ -409,6 +428,9 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted
  *	after TX status because the destination was asleep, it must not
  *	be modified again (no seqno assignment, crypto, etc.)
+ * @IEEE80211_TX_INTFL_MLME_CONN_TX: This frame was transmitted by the MLME
+ *	code for connection establishment, this indicates that its status
+ *	should kick the MLME state machine.
  * @IEEE80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211
  *	MLME command (internal to mac80211 to figure out whether to send TX
  *	status to user space)
@@ -454,13 +476,14 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_STAT_AMPDU			= BIT(10),
 	IEEE80211_TX_STAT_AMPDU_NO_BACK		= BIT(11),
 	IEEE80211_TX_CTL_RATE_CTRL_PROBE	= BIT(12),
+	IEEE80211_TX_INTFL_OFFCHAN_TX_OK	= BIT(13),
 	IEEE80211_TX_INTFL_NEED_TXPROCESSING	= BIT(14),
 	IEEE80211_TX_INTFL_RETRIED		= BIT(15),
 	IEEE80211_TX_INTFL_DONT_ENCRYPT		= BIT(16),
 	IEEE80211_TX_CTL_NO_PS_BUFFER		= BIT(17),
 	IEEE80211_TX_CTL_MORE_FRAMES		= BIT(18),
 	IEEE80211_TX_INTFL_RETRANSMISSION	= BIT(19),
-	/* hole at 20, use later */
+	IEEE80211_TX_INTFL_MLME_CONN_TX		= BIT(20),
 	IEEE80211_TX_INTFL_NL80211_FRAME_TX	= BIT(21),
 	IEEE80211_TX_CTL_LDPC			= BIT(22),
 	IEEE80211_TX_CTL_STBC			= BIT(23) | BIT(24),
@@ -953,6 +976,7 @@ enum ieee80211_smps_mode {
  *
  * @channel: the channel to tune to
  * @channel_type: the channel (HT) type
+ * @radar_enabled: whether radar detection is enabled
  *
  * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
  *    (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
@@ -979,6 +1003,7 @@ struct ieee80211_conf {
 
 	struct ieee80211_channel *channel;
 	enum nl80211_channel_type channel_type;
+	bool radar_enabled;
 	enum ieee80211_smps_mode smps_mode;
 };
 
@@ -1059,7 +1084,7 @@ struct ieee80211_vif {
 	u32 driver_flags;
 
 	/* must be last */
-	u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+	u8 drv_priv[0] __aligned(sizeof(void *));
 };
 
 static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
@@ -1176,6 +1201,24 @@ enum ieee80211_sta_state {
 };
 
 /**
+ * enum ieee80211_sta_rx_bandwidth - station RX bandwidth
+ * @IEEE80211_STA_RX_BW_20: station can only receive 20 MHz
+ * @IEEE80211_STA_RX_BW_40: station can receive up to 40 MHz
+ * @IEEE80211_STA_RX_BW_80: station can receive up to 80 MHz
+ * @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz
+ *	(including 80+80 MHz)
+ *
+ * Implementation note: 20 must be zero to be initialized
+ *	correctly, the values must be sorted.
+ */
+enum ieee80211_sta_rx_bandwidth {
+	IEEE80211_STA_RX_BW_20 = 0,
+	IEEE80211_STA_RX_BW_40,
+	IEEE80211_STA_RX_BW_80,
+	IEEE80211_STA_RX_BW_160,
+};
+
+/**
  * struct ieee80211_sta - station table entry
  *
  * A station table entry represents a station we are possibly
@@ -1197,6 +1240,12 @@ enum ieee80211_sta_state {
  * @uapsd_queues: bitmap of queues configured for uapsd. Only valid
  *	if wme is supported.
  * @max_sp: max Service Period. Only valid if wme is supported.
+ * @bandwidth: current bandwidth the station can receive with
+ * @rx_nss: in HT/VHT, the maximum number of spatial streams the
+ *	station can receive at the moment, changed by operating mode
+ *	notifications and capabilities. The value is only valid after
+ *	the station moves to associated state.
+ * @smps_mode: current SMPS mode (off, static or dynamic)
  */
 struct ieee80211_sta {
 	u32 supp_rates[IEEE80211_NUM_BANDS];
@@ -1207,9 +1256,12 @@ struct ieee80211_sta {
 	bool wme;
 	u8 uapsd_queues;
 	u8 max_sp;
+	u8 rx_nss;
+	enum ieee80211_sta_rx_bandwidth bandwidth;
+	enum ieee80211_smps_mode smps_mode;
 
 	/* must be last */
-	u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+	u8 drv_priv[0] __aligned(sizeof(void *));
 };
 
 /**
@@ -1331,9 +1383,9 @@ struct ieee80211_tx_control {
  *      When this flag is set, signaling beacon-loss will cause an immediate
  *      change to disassociated state.
  *
- * @IEEE80211_HW_NEED_DTIM_PERIOD:
- *	This device needs to know the DTIM period for the BSS before
- *	associating.
+ * @IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC:
+ *	This device needs to get data from beacon before association (i.e.
+ *	dtim_period).
  *
  * @IEEE80211_HW_SUPPORTS_PER_STA_GTK: The device's crypto engine supports
  *	per-station GTKs as used by IBSS RSN or during fast transition. If
@@ -1353,10 +1405,6 @@ struct ieee80211_tx_control {
  *	setup strictly in HW. mac80211 should not attempt to do this in
  *	software.
  *
- * @IEEE80211_HW_SCAN_WHILE_IDLE: The device can do hw scan while
- *	being idle (i.e. mac80211 doesn't have to go idle-off during the
- *	the scan).
- *
  * @IEEE80211_HW_WANT_MONITOR_VIF: The driver would like to be informed of
  *	a virtual monitor interface when monitor interfaces are the only
  *	active interfaces.
@@ -1370,9 +1418,8 @@ struct ieee80211_tx_control {
  *	P2P Interface. This will be honoured even if more than one interface
  *	is supported.
  *
- * @IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL: On this hardware TX BA session
- *	should be tear down once BAR frame will not be acked.
- *
+ * @IEEE80211_HW_TIMING_BEACON_ONLY: Use sync timing from beacon frames
+ *	only, to allow getting TBTT of a DTIM beacon.
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -1382,7 +1429,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE	= 1<<4,
 	IEEE80211_HW_SIGNAL_UNSPEC			= 1<<5,
 	IEEE80211_HW_SIGNAL_DBM				= 1<<6,
-	IEEE80211_HW_NEED_DTIM_PERIOD			= 1<<7,
+	IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC		= 1<<7,
 	IEEE80211_HW_SPECTRUM_MGMT			= 1<<8,
 	IEEE80211_HW_AMPDU_AGGREGATION			= 1<<9,
 	IEEE80211_HW_SUPPORTS_PS			= 1<<10,
@@ -1399,9 +1446,8 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_SUPPORTS_PER_STA_GTK		= 1<<21,
 	IEEE80211_HW_AP_LINK_PS				= 1<<22,
 	IEEE80211_HW_TX_AMPDU_SETUP_IN_HW		= 1<<23,
-	IEEE80211_HW_SCAN_WHILE_IDLE			= 1<<24,
 	IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF		= 1<<25,
-	IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL		= 1<<26,
+	IEEE80211_HW_TIMING_BEACON_ONLY			= 1<<26,
 };
 
 /**
@@ -1522,6 +1568,8 @@ struct ieee80211_hw {
  * structure can then access it via hw->priv. Note that mac802111 drivers should
  * not use wiphy_priv() to try to get their private driver structure as this
  * is already used internally by mac80211.
+ *
+ * Return: The mac80211 driver hw struct of @wiphy.
  */
 struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy);
 
@@ -1628,6 +1676,10 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is
  * provided by update_tkip_key only. The trigger that makes mac80211 call this
  * handler is software decryption with wrap around of iv16.
+ *
+ * The set_default_unicast_key() call updates the default WEP key index
+ * configured to the hardware for WEP encryption type. This is required
+ * for devices that support offload of data packets (e.g. ARP responses).
  */
 
 /**
@@ -1680,15 +1732,6 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS
  * enabled whenever user has enabled powersave.
  *
- * Some hardware need to toggle a single shared antenna between WLAN and
- * Bluetooth to facilitate co-existence. These types of hardware set
- * limitations on the use of host controlled dynamic powersave whenever there
- * is simultaneous WLAN and Bluetooth traffic. For these types of hardware, the
- * driver may request temporarily going into full power save, in order to
- * enable toggling the antenna between BT and WLAN. If the driver requests
- * disabling dynamic powersave, the @dynamic_ps_timeout value will be
- * temporarily set to zero until the driver re-enables dynamic powersave.
- *
  * Driver informs U-APSD client support by enabling
  * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
  * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS
@@ -2033,17 +2076,29 @@ enum ieee80211_filter_flags {
  * calling ieee80211_start_tx_ba_cb_irqsafe, because the peer
  * might receive the addBA frame and send a delBA right away!
  *
- * @IEEE80211_AMPDU_RX_START: start Rx aggregation
- * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation
- * @IEEE80211_AMPDU_TX_START: start Tx aggregation
- * @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation
+ * @IEEE80211_AMPDU_RX_START: start RX aggregation
+ * @IEEE80211_AMPDU_RX_STOP: stop RX aggregation
+ * @IEEE80211_AMPDU_TX_START: start TX aggregation
  * @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational
+ * @IEEE80211_AMPDU_TX_STOP_CONT: stop TX aggregation but continue transmitting
+ *	queued packets, now unaggregated. After all packets are transmitted the
+ *	driver has to call ieee80211_stop_tx_ba_cb_irqsafe().
+ * @IEEE80211_AMPDU_TX_STOP_FLUSH: stop TX aggregation and flush all packets,
+ *	called when the station is removed. There's no need or reason to call
+ *	ieee80211_stop_tx_ba_cb_irqsafe() in this case as mac80211 assumes the
+ *	session is gone and removes the station.
+ * @IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: called when TX aggregation is stopped
+ *	but the driver hasn't called ieee80211_stop_tx_ba_cb_irqsafe() yet and
+ *	now the connection is dropped and the station will be removed. Drivers
+ *	should clean up and drop remaining packets when this is called.
  */
 enum ieee80211_ampdu_mlme_action {
 	IEEE80211_AMPDU_RX_START,
 	IEEE80211_AMPDU_RX_STOP,
 	IEEE80211_AMPDU_TX_START,
-	IEEE80211_AMPDU_TX_STOP,
+	IEEE80211_AMPDU_TX_STOP_CONT,
+	IEEE80211_AMPDU_TX_STOP_FLUSH,
+	IEEE80211_AMPDU_TX_STOP_FLUSH_CONT,
 	IEEE80211_AMPDU_TX_OPERATIONAL,
 };
 
@@ -2062,16 +2117,21 @@ enum ieee80211_frame_release_type {
  * enum ieee80211_rate_control_changed - flags to indicate what changed
  *
  * @IEEE80211_RC_BW_CHANGED: The bandwidth that can be used to transmit
- *	to this station changed.
+ *	to this station changed. The actual bandwidth is in the station
+ *	information -- for HT20/40 the IEEE80211_HT_CAP_SUP_WIDTH_20_40
+ *	flag changes, for HT and VHT the bandwidth field changes.
  * @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed.
  * @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer
  *	changed (in IBSS mode) due to discovering more information about
  *	the peer.
+ * @IEEE80211_RC_NSS_CHANGED: N_SS (number of spatial streams) was changed
+ *	by the peer
  */
 enum ieee80211_rate_control_changed {
 	IEEE80211_RC_BW_CHANGED		= BIT(0),
 	IEEE80211_RC_SMPS_CHANGED	= BIT(1),
 	IEEE80211_RC_SUPP_RATES_CHANGED	= BIT(2),
+	IEEE80211_RC_NSS_CHANGED	= BIT(3),
 };
 
 /**
@@ -2152,6 +2212,18 @@ enum ieee80211_rate_control_changed {
  *	MAC address of the device going away.
  *	Hence, this callback must be implemented. It can sleep.
  *
+ * @add_interface_debugfs: Drivers can use this callback to add debugfs files
+ *	when a vif is added to mac80211. This callback and
+ *	@remove_interface_debugfs should be within a CONFIG_MAC80211_DEBUGFS
+ *	conditional. @remove_interface_debugfs must be provided for cleanup.
+ *	This callback can sleep.
+ *
+ * @remove_interface_debugfs: Remove the debugfs files which were added using
+ *	@add_interface_debugfs. This callback must remove all debugfs entries
+ *	that were added because mac80211 only removes interface debugfs when the
+ *	interface is destroyed, not when it is removed from the driver.
+ *	This callback can sleep.
+ *
  * @config: Handler for configuration requests. IEEE 802.11 code calls this
  *	function to change hardware configuration, e.g., channel.
  *	This function should never fail but returns a negative error code
@@ -2194,6 +2266,10 @@ enum ieee80211_rate_control_changed {
  *	After rekeying was done it should (for example during resume) notify
  *	userspace of the new replay counter using ieee80211_gtk_rekey_notify().
  *
+ * @set_default_unicast_key: Set the default (unicast) key index, useful for
+ *	WEP when the device sends data packets autonomously, e.g. for ARP
+ *	offloading. The index can be 0-3, or -1 for unsetting it.
+ *
  * @hw_scan: Ask the hardware to service the scan request, no need to start
  *	the scan state machine in stack. The scan must honour the channel
  *	configuration done by the regulatory agent in the wiphy's
@@ -2474,7 +2550,13 @@ enum ieee80211_rate_control_changed {
  *
  * @restart_complete: Called after a call to ieee80211_restart_hw(), when the
  *	reconfiguration has completed. This can help the driver implement the
- *	reconfiguration step. This callback may sleep.
+ *	reconfiguration step. Also called when reconfiguring because the
+ *	driver's resume function returned 1, as this is just like an "inline"
+ *	hardware restart. This callback may sleep.
+ *
+ * @ipv6_addr_change: IPv6 address assignment on the given interface changed.
+ *	Currently, this is only called for managed or P2P client interfaces.
+ *	This callback is optional; it must not sleep.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -2522,6 +2604,8 @@ struct ieee80211_ops {
 	void (*set_rekey_data)(struct ieee80211_hw *hw,
 			       struct ieee80211_vif *vif,
 			       struct cfg80211_gtk_rekey_data *data);
+	void (*set_default_unicast_key)(struct ieee80211_hw *hw,
+					struct ieee80211_vif *vif, int idx);
 	int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		       struct cfg80211_scan_request *req);
 	void (*cancel_hw_scan)(struct ieee80211_hw *hw,
@@ -2553,6 +2637,12 @@ struct ieee80211_ops {
 				   struct ieee80211_vif *vif,
 				   struct ieee80211_sta *sta,
 				   struct dentry *dir);
+	void (*add_interface_debugfs)(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif,
+				      struct dentry *dir);
+	void (*remove_interface_debugfs)(struct ieee80211_hw *hw,
+					 struct ieee80211_vif *vif,
+					 struct dentry *dir);
 #endif
 	void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			enum sta_notify_cmd, struct ieee80211_sta *sta);
@@ -2606,6 +2696,7 @@ struct ieee80211_ops {
 	int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 				const struct cfg80211_bitrate_mask *mask);
 	void (*rssi_callback)(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
 			      enum ieee80211_rssi_event rssi_event);
 
 	void (*allow_buffered_frames)(struct ieee80211_hw *hw,
@@ -2648,6 +2739,12 @@ struct ieee80211_ops {
 				     struct ieee80211_chanctx_conf *ctx);
 
 	void (*restart_complete)(struct ieee80211_hw *hw);
+
+#if IS_ENABLED(CONFIG_IPV6)
+	void (*ipv6_addr_change)(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct inet6_dev *idev);
+#endif
 };
 
 /**
@@ -2661,6 +2758,8 @@ struct ieee80211_ops {
  *
  * @priv_data_len: length of private data
  * @ops: callbacks for this device
+ *
+ * Return: A pointer to the new hardware device, or %NULL on error.
  */
 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 					const struct ieee80211_ops *ops);
@@ -2673,6 +2772,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
  * need to fill the contained wiphy's information.
  *
  * @hw: the device to register as returned by ieee80211_alloc_hw()
+ *
+ * Return: 0 on success. An error code otherwise.
  */
 int ieee80211_register_hw(struct ieee80211_hw *hw);
 
@@ -2719,6 +2820,8 @@ extern char *__ieee80211_create_tpt_led_trigger(
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
 {
@@ -2738,6 +2841,8 @@ static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
 {
@@ -2757,6 +2862,8 @@ static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
 {
@@ -2776,6 +2883,8 @@ static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
 {
@@ -2793,9 +2902,10 @@ static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
  * @blink_table: the blink table -- needs to be ordered by throughput
  * @blink_table_len: size of the blink table
  *
- * This function returns %NULL (in case of error, or if no LED
- * triggers are configured) or the name of the new trigger.
- * This function must be called before ieee80211_register_hw().
+ * Return: %NULL (in case of error, or if no LED triggers are
+ * configured) or the name of the new trigger.
+ *
+ * Note: This function must be called before ieee80211_register_hw().
  */
 static inline char *
 ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
@@ -2928,10 +3038,10 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
  * Calls to this function for a single hardware must be synchronized against
  * each other.
  *
- * The function returns -EINVAL when the requested PS mode is already set.
- *
  * @sta: currently connected sta
  * @start: start or stop PS
+ *
+ * Return: 0 on success. -EINVAL when the requested PS mode is already set.
  */
 int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
 
@@ -2945,6 +3055,8 @@ int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
  *
  * @sta: currently connected sta
  * @start: start or stop PS
+ *
+ * Return: Like ieee80211_sta_ps_transition().
  */
 static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
 						  bool start)
@@ -3082,6 +3194,8 @@ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
  * according to the current DTIM parameters/TIM bitmap.
  *
  * The driver is responsible for freeing the returned skb.
+ *
+ * Return: The beacon template. %NULL on error.
  */
 struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 					 struct ieee80211_vif *vif,
@@ -3093,6 +3207,8 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  *
  * See ieee80211_beacon_get_tim().
+ *
+ * Return: See ieee80211_beacon_get_tim().
  */
 static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 						   struct ieee80211_vif *vif)
@@ -3109,6 +3225,8 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
  * hardware. The destination address should be set by the caller.
  *
  * Can only be called in AP mode.
+ *
+ * Return: The Probe Response template. %NULL on error.
  */
 struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
 					struct ieee80211_vif *vif);
@@ -3124,6 +3242,8 @@ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
  *
  * Note: Caller (or hardware) is responsible for setting the
  * &IEEE80211_FCTL_PM bit.
+ *
+ * Return: The PS Poll template. %NULL on error.
  */
 struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
 				     struct ieee80211_vif *vif);
@@ -3139,6 +3259,8 @@ struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
  *
  * Note: Caller (or hardware) is responsible for setting the
  * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields.
+ *
+ * Return: The nullfunc template. %NULL on error.
  */
 struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif);
@@ -3153,6 +3275,8 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
  *
  * Creates a Probe Request template which can, for example, be uploaded to
  * hardware.
+ *
+ * Return: The Probe Request template. %NULL on error.
  */
 struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif,
@@ -3188,6 +3312,8 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
  * If the RTS is generated in firmware, but the host system must provide
  * the duration field, the low-level driver uses this function to receive
  * the duration field value in little-endian byteorder.
+ *
+ * Return: The duration.
  */
 __le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
 			      struct ieee80211_vif *vif, size_t frame_len,
@@ -3223,6 +3349,8 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
  * If the CTS-to-self is generated in firmware, but the host system must provide
  * the duration field, the low-level driver uses this function to receive
  * the duration field value in little-endian byteorder.
+ *
+ * Return: The duration.
  */
 __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
 				    struct ieee80211_vif *vif,
@@ -3239,6 +3367,8 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
  *
  * Calculate the duration field of some generic frame, given its
  * length and transmission rate (in 100kbps).
+ *
+ * Return: The duration.
  */
 __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
 					struct ieee80211_vif *vif,
@@ -3255,9 +3385,10 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
  * hardware/firmware does not implement buffering of broadcast/multicast
  * frames when power saving is used, 802.11 code buffers them in the host
  * memory. The low-level driver uses this function to fetch next buffered
- * frame. In most cases, this is used when generating beacon frame. This
- * function returns a pointer to the next buffered skb or NULL if no more
- * buffered frames are available.
+ * frame. In most cases, this is used when generating beacon frame.
+ *
+ * Return: A pointer to the next buffered skb or NULL if no more buffered
+ * frames are available.
  *
  * Note: buffered frames are returned only after DTIM beacon frame was
  * generated with ieee80211_beacon_get() and the low-level driver must thus
@@ -3437,6 +3568,8 @@ void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
  * @queue: queue number (counted from zero).
  *
  * Drivers should use this function instead of netif_stop_queue.
+ *
+ * Return: %true if the queue is stopped. %false otherwise.
  */
 
 int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue);
@@ -3634,7 +3767,9 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
  * @vif: virtual interface to look for station on
  * @addr: station's address
  *
- * This function must be called under RCU lock and the
+ * Return: The station, if found. %NULL otherwise.
+ *
+ * Note: This function must be called under RCU lock and the
  * resulting pointer is only valid under RCU lock as well.
  */
 struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
@@ -3647,7 +3782,9 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
  * @addr: remote station's address
  * @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'.
  *
- * This function must be called under RCU lock and the
+ * Return: The station, if found. %NULL otherwise.
+ *
+ * Note: This function must be called under RCU lock and the
  * resulting pointer is only valid under RCU lock as well.
  *
  * NOTE: You may pass NULL for localaddr, but then you will just get
@@ -3754,6 +3891,11 @@ void ieee80211_iter_keys(struct ieee80211_hw *hw,
  * The iterator will not find a context that's being added (during
  * the driver callback to add it) but will find it while it's being
  * removed.
+ *
+ * Note that during hardware restart, all contexts that existed
+ * before the restart are considered already present so will be
+ * found while iterating, whether they've been re-added already
+ * or not.
  */
 void ieee80211_iter_chan_contexts_atomic(
 	struct ieee80211_hw *hw,
@@ -3772,7 +3914,9 @@ void ieee80211_iter_chan_contexts_atomic(
  * information. This function must only be called from within the
  * .bss_info_changed callback function and only in managed mode. The function
  * is only useful when the interface is associated, otherwise it will return
- * NULL.
+ * %NULL.
+ *
+ * Return: The Probe Request template. %NULL on error.
  */
 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
 					  struct ieee80211_vif *vif);
@@ -3796,6 +3940,8 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif);
  * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER, and
  * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver
  * needs to inform if the connection to the AP has been lost.
+ * The function may also be called if the connection needs to be terminated
+ * for some other reason, even if %IEEE80211_HW_CONNECTION_MONITOR isn't set.
  *
  * This function will cause immediate change to disassociated state,
  * without connection recovery attempts.
@@ -3826,36 +3972,6 @@ void ieee80211_connection_loss(struct ieee80211_vif *vif);
 void ieee80211_resume_disconnect(struct ieee80211_vif *vif);
 
 /**
- * ieee80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm
- *
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
- *
- * Some hardware require full power save to manage simultaneous BT traffic
- * on the WLAN frequency. Full PSM is required periodically, whenever there are
- * burst of BT traffic. The hardware gets information of BT traffic via
- * hardware co-existence lines, and consequentially requests mac80211 to
- * (temporarily) enter full psm.
- * This function will only temporarily disable dynamic PS, not enable PSM if
- * it was not already enabled.
- * The driver must make sure to re-enable dynamic PS using
- * ieee80211_enable_dyn_ps() if the driver has disabled it.
- *
- */
-void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif);
-
-/**
- * ieee80211_enable_dyn_ps - restore dynamic psm after being disabled
- *
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
- *
- * This function restores dynamic PS after being temporarily disabled via
- * ieee80211_disable_dyn_ps(). Each ieee80211_disable_dyn_ps() call must
- * be coupled with an eventual call to this function.
- *
- */
-void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif);
-
-/**
  * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring
  *	rssi threshold triggered
  *
@@ -3872,6 +3988,13 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
 			       gfp_t gfp);
 
 /**
+ * ieee80211_radar_detected - inform that a radar was detected
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ */
+void ieee80211_radar_detected(struct ieee80211_hw *hw);
+
+/**
  * ieee80211_chswitch_done - Complete channel switch process
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @success: make the channel switch successful or not
@@ -4119,13 +4242,27 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
 void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
 
 /**
- * ieee80211_ave_rssi - report the average rssi for the specified interface
+ * ieee80211_ave_rssi - report the average RSSI for the specified interface
  *
  * @vif: the specified virtual interface
  *
- * This function return the average rssi value for the requested interface.
- * It assumes that the given vif is valid.
+ * Note: This function assumes that the given vif is valid.
+ *
+ * Return: The average RSSI value for the requested interface, or 0 if not
+ * applicable.
  */
 int ieee80211_ave_rssi(struct ieee80211_vif *vif);
 
+/**
+ * ieee80211_report_wowlan_wakeup - report WoWLAN wakeup
+ * @vif: virtual interface
+ * @wakeup: wakeup reason(s)
+ * @gfp: allocation flags
+ *
+ * See cfg80211_report_wowlan_wakeup().
+ */
+void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif,
+				    struct cfg80211_wowlan_wakeup *wakeup,
+				    gfp_t gfp);
+
 #endif /* MAC80211_H */