aboutsummaryrefslogtreecommitdiff
path: root/include/net
diff options
context:
space:
mode:
authorJohn W. Linville2012-03-09 14:57:30 -0500
committerJohn W. Linville2012-03-09 14:57:30 -0500
commit74dd1521d0b4f940cdd3ce7b9d988836bef589b8 (patch)
tree42f3d4ee1d4e6d60a91aaadab771f766a3024bc0 /include/net
parent2f2d76cc3e938389feee671b46252dde6880b3b7 (diff)
parent1745e4405b2c0da6db2ec4b6bc0ad930612d8295 (diff)
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Diffstat (limited to 'include/net')
-rw-r--r--include/net/cfg80211.h29
-rw-r--r--include/net/mac80211.h12
-rw-r--r--include/net/nfc/nci_core.h10
-rw-r--r--include/net/nfc/nfc.h30
4 files changed, 47 insertions, 34 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 0178c7489373..57c9fddc2acf 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -413,6 +413,7 @@ struct cfg80211_beacon_data {
* @crypto: crypto settings
* @privacy: the BSS uses privacy
* @auth_type: Authentication type (algorithm)
+ * @inactivity_timeout: time in seconds to determine station's inactivity.
*/
struct cfg80211_ap_settings {
struct cfg80211_beacon_data beacon;
@@ -424,6 +425,7 @@ struct cfg80211_ap_settings {
struct cfg80211_crypto_settings crypto;
bool privacy;
enum nl80211_auth_type auth_type;
+ int inactivity_timeout;
};
/**
@@ -809,6 +811,7 @@ struct mesh_config {
* Still keeping the same nomenclature to be in sync with the spec. */
bool dot11MeshGateAnnouncementProtocol;
bool dot11MeshForwarding;
+ s32 rssi_threshold;
};
/**
@@ -1356,12 +1359,10 @@ struct cfg80211_gtk_rekey_data {
*
* @set_rekey_data: give the data necessary for GTK rekeying to the driver
*
- * @add_beacon: Add a beacon with given parameters, @head, @interval
- * and @dtim_period will be valid, @tail is optional.
- * @set_beacon: Change the beacon parameters for an access point mode
- * interface. This should reject the call when no beacon has been
- * configured.
- * @del_beacon: Remove beacon configuration and stop sending the beacon.
+ * @start_ap: Start acting in AP mode defined by the parameters.
+ * @change_beacon: Change the beacon parameters for an access point mode
+ * interface. This should reject the call when AP mode wasn't started.
+ * @stop_ap: Stop being an AP, including stopping beaconing.
*
* @add_station: Add a new station.
* @del_station: Remove a station; @mac may be NULL to remove all stations.
@@ -3188,6 +3189,7 @@ void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp);
* cfg80211_rx_mgmt - notification of received, unprocessed management frame
* @dev: network device
* @freq: Frequency on which the frame was received in MHz
+ * @sig_dbm: signal strength in mBm, or 0 if unknown
* @buf: Management frame (header + body)
* @len: length of the frame data
* @gfp: context flags
@@ -3200,8 +3202,8 @@ void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp);
* This function is called whenever an Action frame is received for a station
* mode interface, but is not processed in kernel.
*/
-bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
- size_t len, gfp_t gfp);
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, int sig_dbm,
+ const u8 *buf, size_t len, gfp_t gfp);
/**
* cfg80211_mgmt_tx_status - notification of TX status for management frame
@@ -3314,6 +3316,7 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
* @frame: the frame
* @len: length of the frame
* @freq: frequency the frame was received on
+ * @sig_dbm: signal strength in mBm, or 0 if unknown
* @gfp: allocation flags
*
* Use this function to report to userspace when a beacon was
@@ -3322,7 +3325,7 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
*/
void cfg80211_report_obss_beacon(struct wiphy *wiphy,
const u8 *frame, size_t len,
- int freq, gfp_t gfp);
+ int freq, int sig_dbm, gfp_t gfp);
/*
* cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used
@@ -3334,6 +3337,14 @@ int cfg80211_can_beacon_sec_chan(struct wiphy *wiphy,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type);
+/*
+ * cfg80211_calculate_bitrate - calculate actual bitrate (in 100Kbps units)
+ * @rate: given rate_info to calculate bitrate from
+ *
+ * return 0 if MCS index >= 32
+ */
+u16 cfg80211_calculate_bitrate(struct rate_info *rate);
+
/* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 7477f020ee7a..f7917f765cbc 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -659,6 +659,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
* @RX_FLAG_40MHZ: HT40 (40 MHz) was used
* @RX_FLAG_SHORT_GI: Short guard interval was used
+ * @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present.
+ * Valid only for data frames (mainly A-MPDU)
*/
enum mac80211_rx_flags {
RX_FLAG_MMIC_ERROR = 1<<0,
@@ -672,6 +674,7 @@ enum mac80211_rx_flags {
RX_FLAG_HT = 1<<9,
RX_FLAG_40MHZ = 1<<10,
RX_FLAG_SHORT_GI = 1<<11,
+ RX_FLAG_NO_SIGNAL_VAL = 1<<12,
};
/**
@@ -3565,6 +3568,8 @@ enum rate_control_changed {
* @hw: The hardware the algorithm is invoked for.
* @sband: The band this frame is being transmitted on.
* @bss_conf: the current BSS configuration
+ * @skb: the skb that will be transmitted, the control information in it needs
+ * to be filled in
* @reported_rate: The rate control algorithm can fill this in to indicate
* which rate should be reported to userspace as the current rate and
* used for rate calculations in the mesh network.
@@ -3572,12 +3577,11 @@ enum rate_control_changed {
* RTS threshold
* @short_preamble: whether mac80211 will request short-preamble transmission
* if the selected rate supports it
- * @max_rate_idx: user-requested maximum rate (not MCS for now)
+ * @max_rate_idx: user-requested maximum (legacy) rate
* (deprecated; this will be removed once drivers get updated to use
* rate_idx_mask)
- * @rate_idx_mask: user-requested rate mask (not MCS for now)
- * @skb: the skb that will be transmitted, the control information in it needs
- * to be filled in
+ * @rate_idx_mask: user-requested (legacy) rate mask
+ * @rate_idx_mcs_mask: user-requested MCS rate mask
* @bss: whether this frame is sent out in AP or IBSS mode
*/
struct ieee80211_tx_rate_control {
diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
index 86fee8b5c65c..feba74027ff8 100644
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -141,17 +141,17 @@ struct nci_dev {
/* ----- NCI Devices ----- */
struct nci_dev *nci_allocate_device(struct nci_ops *ops,
- __u32 supported_protocols,
- int tx_headroom,
- int tx_tailroom);
+ __u32 supported_protocols,
+ int tx_headroom,
+ int tx_tailroom);
void nci_free_device(struct nci_dev *ndev);
int nci_register_device(struct nci_dev *ndev);
void nci_unregister_device(struct nci_dev *ndev);
int nci_recv_frame(struct sk_buff *skb);
static inline struct sk_buff *nci_skb_alloc(struct nci_dev *ndev,
- unsigned int len,
- gfp_t how)
+ unsigned int len,
+ gfp_t how)
{
struct sk_buff *skb;
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
index d253278e5a96..bac070bf3514 100644
--- a/include/net/nfc/nfc.h
+++ b/include/net/nfc/nfc.h
@@ -53,15 +53,15 @@ struct nfc_ops {
int (*dev_down)(struct nfc_dev *dev);
int (*start_poll)(struct nfc_dev *dev, u32 protocols);
void (*stop_poll)(struct nfc_dev *dev);
- int (*dep_link_up)(struct nfc_dev *dev, int target_idx,
- u8 comm_mode, u8 rf_mode);
+ int (*dep_link_up)(struct nfc_dev *dev, int target_idx, u8 comm_mode,
+ u8 *gb, size_t gb_len);
int (*dep_link_down)(struct nfc_dev *dev);
int (*activate_target)(struct nfc_dev *dev, u32 target_idx,
- u32 protocol);
+ u32 protocol);
void (*deactivate_target)(struct nfc_dev *dev, u32 target_idx);
int (*data_exchange)(struct nfc_dev *dev, u32 target_idx,
- struct sk_buff *skb, data_exchange_cb_t cb,
- void *cb_context);
+ struct sk_buff *skb, data_exchange_cb_t cb,
+ void *cb_context);
};
#define NFC_TARGET_IDX_ANY -1
@@ -110,9 +110,9 @@ struct nfc_dev {
extern struct class nfc_class;
struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops,
- u32 supported_protocols,
- int tx_headroom,
- int tx_tailroom);
+ u32 supported_protocols,
+ int tx_headroom,
+ int tx_tailroom);
/**
* nfc_free_device - free nfc device
@@ -135,7 +135,7 @@ void nfc_unregister_device(struct nfc_dev *dev);
* @dev: The parent device
*/
static inline void nfc_set_parent_dev(struct nfc_dev *nfc_dev,
- struct device *dev)
+ struct device *dev)
{
nfc_dev->dev.parent = dev;
}
@@ -172,17 +172,15 @@ static inline const char *nfc_device_name(struct nfc_dev *dev)
}
struct sk_buff *nfc_alloc_send_skb(struct nfc_dev *dev, struct sock *sk,
- unsigned int flags, unsigned int size,
- unsigned int *err);
+ unsigned int flags, unsigned int size,
+ unsigned int *err);
struct sk_buff *nfc_alloc_recv_skb(unsigned int size, gfp_t gfp);
int nfc_set_remote_general_bytes(struct nfc_dev *dev,
- u8 *gt, u8 gt_len);
+ u8 *gt, u8 gt_len);
-u8 *nfc_get_local_general_bytes(struct nfc_dev *dev, u8 *gt_len);
-
-int nfc_targets_found(struct nfc_dev *dev, struct nfc_target *targets,
- int ntargets);
+int nfc_targets_found(struct nfc_dev *dev,
+ struct nfc_target *targets, int ntargets);
int nfc_dep_link_is_up(struct nfc_dev *dev, u32 target_idx,
u8 comm_mode, u8 rf_mode);