scsi: ufs: Split the drivers/scsi/ufs directory

Split the drivers/scsi/ufs directory into 'core' and 'host' directories
under the drivers/ufs/ directory. Move shared header files into the
include/ufs/ directory. This separation makes it clear which header files
UFS drivers are allowed to include (include/ufs/*.h) and which header files
UFS drivers are not allowed to include (drivers/ufs/core/*.h).

Update the MAINTAINERS file. Add myself as a UFS reviewer.

Link: https://lore.kernel.org/r/20220511212552.655341-1-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Keoseong Park <keosung.park@samsung.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

5 files changed, 2795 insertions, 0 deletions

diff --git a/include/ufs/ufs.h b/include/ufs/ufs.h
new file mode 100644
index 000000000000..1bba3fead2ce
--- /dev/null
+++ b/include/ufs/ufs.h
@@ -0,0 +1,623 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Universal Flash Storage Host controller driver
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ *	Santosh Yaraganavi <santosh.sy@samsung.com>
+ *	Vinayak Holikatti <h.vinayak@samsung.com>
+ */
+
+#ifndef _UFS_H
+#define _UFS_H
+
+#include <linux/mutex.h>
+#include <linux/types.h>
+#include <uapi/scsi/scsi_bsg_ufs.h>
+
+#define GENERAL_UPIU_REQUEST_SIZE (sizeof(struct utp_upiu_req))
+#define QUERY_DESC_MAX_SIZE       255
+#define QUERY_DESC_MIN_SIZE       2
+#define QUERY_DESC_HDR_SIZE       2
+#define QUERY_OSF_SIZE            (GENERAL_UPIU_REQUEST_SIZE - \
+					(sizeof(struct utp_upiu_header)))
+#define UFS_SENSE_SIZE	18
+
+#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
+			cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
+			 (byte1 << 8) | (byte0))
+/*
+ * UFS device may have standard LUs and LUN id could be from 0x00 to
+ * 0x7F. Standard LUs use "Peripheral Device Addressing Format".
+ * UFS device may also have the Well Known LUs (also referred as W-LU)
+ * which again could be from 0x00 to 0x7F. For W-LUs, device only use
+ * the "Extended Addressing Format" which means the W-LUNs would be
+ * from 0xc100 (SCSI_W_LUN_BASE) onwards.
+ * This means max. LUN number reported from UFS device could be 0xC17F.
+ */
+#define UFS_UPIU_MAX_UNIT_NUM_ID	0x7F
+#define UFS_MAX_LUNS		(SCSI_W_LUN_BASE + UFS_UPIU_MAX_UNIT_NUM_ID)
+#define UFS_UPIU_WLUN_ID	(1 << 7)
+#define UFS_RPMB_UNIT		0xC4
+
+/* WriteBooster buffer is available only for the logical unit from 0 to 7 */
+#define UFS_UPIU_MAX_WB_LUN_ID	8
+
+/*
+ * WriteBooster buffer lifetime has a limit setted by vendor.
+ * If it is over the limit, WriteBooster feature will be disabled.
+ */
+#define UFS_WB_EXCEED_LIFETIME		0x0B
+
+/* Well known logical unit id in LUN field of UPIU */
+enum {
+	UFS_UPIU_REPORT_LUNS_WLUN	= 0x81,
+	UFS_UPIU_UFS_DEVICE_WLUN	= 0xD0,
+	UFS_UPIU_BOOT_WLUN		= 0xB0,
+	UFS_UPIU_RPMB_WLUN		= 0xC4,
+};
+
+/*
+ * UFS Protocol Information Unit related definitions
+ */
+
+/* Task management functions */
+enum {
+	UFS_ABORT_TASK		= 0x01,
+	UFS_ABORT_TASK_SET	= 0x02,
+	UFS_CLEAR_TASK_SET	= 0x04,
+	UFS_LOGICAL_RESET	= 0x08,
+	UFS_QUERY_TASK		= 0x80,
+	UFS_QUERY_TASK_SET	= 0x81,
+};
+
+/* UTP UPIU Transaction Codes Initiator to Target */
+enum {
+	UPIU_TRANSACTION_NOP_OUT	= 0x00,
+	UPIU_TRANSACTION_COMMAND	= 0x01,
+	UPIU_TRANSACTION_DATA_OUT	= 0x02,
+	UPIU_TRANSACTION_TASK_REQ	= 0x04,
+	UPIU_TRANSACTION_QUERY_REQ	= 0x16,
+};
+
+/* UTP UPIU Transaction Codes Target to Initiator */
+enum {
+	UPIU_TRANSACTION_NOP_IN		= 0x20,
+	UPIU_TRANSACTION_RESPONSE	= 0x21,
+	UPIU_TRANSACTION_DATA_IN	= 0x22,
+	UPIU_TRANSACTION_TASK_RSP	= 0x24,
+	UPIU_TRANSACTION_READY_XFER	= 0x31,
+	UPIU_TRANSACTION_QUERY_RSP	= 0x36,
+	UPIU_TRANSACTION_REJECT_UPIU	= 0x3F,
+};
+
+/* UPIU Read/Write flags */
+enum {
+	UPIU_CMD_FLAGS_NONE	= 0x00,
+	UPIU_CMD_FLAGS_WRITE	= 0x20,
+	UPIU_CMD_FLAGS_READ	= 0x40,
+};
+
+/* UPIU Task Attributes */
+enum {
+	UPIU_TASK_ATTR_SIMPLE	= 0x00,
+	UPIU_TASK_ATTR_ORDERED	= 0x01,
+	UPIU_TASK_ATTR_HEADQ	= 0x02,
+	UPIU_TASK_ATTR_ACA	= 0x03,
+};
+
+/* UPIU Query request function */
+enum {
+	UPIU_QUERY_FUNC_STANDARD_READ_REQUEST           = 0x01,
+	UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST          = 0x81,
+};
+
+/* Flag idn for Query Requests*/
+enum flag_idn {
+	QUERY_FLAG_IDN_FDEVICEINIT			= 0x01,
+	QUERY_FLAG_IDN_PERMANENT_WPE			= 0x02,
+	QUERY_FLAG_IDN_PWR_ON_WPE			= 0x03,
+	QUERY_FLAG_IDN_BKOPS_EN				= 0x04,
+	QUERY_FLAG_IDN_LIFE_SPAN_MODE_ENABLE		= 0x05,
+	QUERY_FLAG_IDN_PURGE_ENABLE			= 0x06,
+	QUERY_FLAG_IDN_RESERVED2			= 0x07,
+	QUERY_FLAG_IDN_FPHYRESOURCEREMOVAL		= 0x08,
+	QUERY_FLAG_IDN_BUSY_RTC				= 0x09,
+	QUERY_FLAG_IDN_RESERVED3			= 0x0A,
+	QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE	= 0x0B,
+	QUERY_FLAG_IDN_WB_EN                            = 0x0E,
+	QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN                 = 0x0F,
+	QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8     = 0x10,
+	QUERY_FLAG_IDN_HPB_RESET                        = 0x11,
+	QUERY_FLAG_IDN_HPB_EN				= 0x12,
+};
+
+/* Attribute idn for Query requests */
+enum attr_idn {
+	QUERY_ATTR_IDN_BOOT_LU_EN		= 0x00,
+	QUERY_ATTR_IDN_MAX_HPB_SINGLE_CMD	= 0x01,
+	QUERY_ATTR_IDN_POWER_MODE		= 0x02,
+	QUERY_ATTR_IDN_ACTIVE_ICC_LVL		= 0x03,
+	QUERY_ATTR_IDN_OOO_DATA_EN		= 0x04,
+	QUERY_ATTR_IDN_BKOPS_STATUS		= 0x05,
+	QUERY_ATTR_IDN_PURGE_STATUS		= 0x06,
+	QUERY_ATTR_IDN_MAX_DATA_IN		= 0x07,
+	QUERY_ATTR_IDN_MAX_DATA_OUT		= 0x08,
+	QUERY_ATTR_IDN_DYN_CAP_NEEDED		= 0x09,
+	QUERY_ATTR_IDN_REF_CLK_FREQ		= 0x0A,
+	QUERY_ATTR_IDN_CONF_DESC_LOCK		= 0x0B,
+	QUERY_ATTR_IDN_MAX_NUM_OF_RTT		= 0x0C,
+	QUERY_ATTR_IDN_EE_CONTROL		= 0x0D,
+	QUERY_ATTR_IDN_EE_STATUS		= 0x0E,
+	QUERY_ATTR_IDN_SECONDS_PASSED		= 0x0F,
+	QUERY_ATTR_IDN_CNTX_CONF		= 0x10,
+	QUERY_ATTR_IDN_CORR_PRG_BLK_NUM		= 0x11,
+	QUERY_ATTR_IDN_RESERVED2		= 0x12,
+	QUERY_ATTR_IDN_RESERVED3		= 0x13,
+	QUERY_ATTR_IDN_FFU_STATUS		= 0x14,
+	QUERY_ATTR_IDN_PSA_STATE		= 0x15,
+	QUERY_ATTR_IDN_PSA_DATA_SIZE		= 0x16,
+	QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME	= 0x17,
+	QUERY_ATTR_IDN_CASE_ROUGH_TEMP          = 0x18,
+	QUERY_ATTR_IDN_HIGH_TEMP_BOUND          = 0x19,
+	QUERY_ATTR_IDN_LOW_TEMP_BOUND           = 0x1A,
+	QUERY_ATTR_IDN_WB_FLUSH_STATUS	        = 0x1C,
+	QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE       = 0x1D,
+	QUERY_ATTR_IDN_WB_BUFF_LIFE_TIME_EST    = 0x1E,
+	QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE        = 0x1F,
+};
+
+/* Descriptor idn for Query requests */
+enum desc_idn {
+	QUERY_DESC_IDN_DEVICE		= 0x0,
+	QUERY_DESC_IDN_CONFIGURATION	= 0x1,
+	QUERY_DESC_IDN_UNIT		= 0x2,
+	QUERY_DESC_IDN_RFU_0		= 0x3,
+	QUERY_DESC_IDN_INTERCONNECT	= 0x4,
+	QUERY_DESC_IDN_STRING		= 0x5,
+	QUERY_DESC_IDN_RFU_1		= 0x6,
+	QUERY_DESC_IDN_GEOMETRY		= 0x7,
+	QUERY_DESC_IDN_POWER		= 0x8,
+	QUERY_DESC_IDN_HEALTH           = 0x9,
+	QUERY_DESC_IDN_MAX,
+};
+
+enum desc_header_offset {
+	QUERY_DESC_LENGTH_OFFSET	= 0x00,
+	QUERY_DESC_DESC_TYPE_OFFSET	= 0x01,
+};
+
+/* Unit descriptor parameters offsets in bytes*/
+enum unit_desc_param {
+	UNIT_DESC_PARAM_LEN			= 0x0,
+	UNIT_DESC_PARAM_TYPE			= 0x1,
+	UNIT_DESC_PARAM_UNIT_INDEX		= 0x2,
+	UNIT_DESC_PARAM_LU_ENABLE		= 0x3,
+	UNIT_DESC_PARAM_BOOT_LUN_ID		= 0x4,
+	UNIT_DESC_PARAM_LU_WR_PROTECT		= 0x5,
+	UNIT_DESC_PARAM_LU_Q_DEPTH		= 0x6,
+	UNIT_DESC_PARAM_PSA_SENSITIVE		= 0x7,
+	UNIT_DESC_PARAM_MEM_TYPE		= 0x8,
+	UNIT_DESC_PARAM_DATA_RELIABILITY	= 0x9,
+	UNIT_DESC_PARAM_LOGICAL_BLK_SIZE	= 0xA,
+	UNIT_DESC_PARAM_LOGICAL_BLK_COUNT	= 0xB,
+	UNIT_DESC_PARAM_ERASE_BLK_SIZE		= 0x13,
+	UNIT_DESC_PARAM_PROVISIONING_TYPE	= 0x17,
+	UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT	= 0x18,
+	UNIT_DESC_PARAM_CTX_CAPABILITIES	= 0x20,
+	UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1	= 0x22,
+	UNIT_DESC_PARAM_HPB_LU_MAX_ACTIVE_RGNS	= 0x23,
+	UNIT_DESC_PARAM_HPB_PIN_RGN_START_OFF	= 0x25,
+	UNIT_DESC_PARAM_HPB_NUM_PIN_RGNS	= 0x27,
+	UNIT_DESC_PARAM_WB_BUF_ALLOC_UNITS	= 0x29,
+};
+
+/* Device descriptor parameters offsets in bytes*/
+enum device_desc_param {
+	DEVICE_DESC_PARAM_LEN			= 0x0,
+	DEVICE_DESC_PARAM_TYPE			= 0x1,
+	DEVICE_DESC_PARAM_DEVICE_TYPE		= 0x2,
+	DEVICE_DESC_PARAM_DEVICE_CLASS		= 0x3,
+	DEVICE_DESC_PARAM_DEVICE_SUB_CLASS	= 0x4,
+	DEVICE_DESC_PARAM_PRTCL			= 0x5,
+	DEVICE_DESC_PARAM_NUM_LU		= 0x6,
+	DEVICE_DESC_PARAM_NUM_WLU		= 0x7,
+	DEVICE_DESC_PARAM_BOOT_ENBL		= 0x8,
+	DEVICE_DESC_PARAM_DESC_ACCSS_ENBL	= 0x9,
+	DEVICE_DESC_PARAM_INIT_PWR_MODE		= 0xA,
+	DEVICE_DESC_PARAM_HIGH_PR_LUN		= 0xB,
+	DEVICE_DESC_PARAM_SEC_RMV_TYPE		= 0xC,
+	DEVICE_DESC_PARAM_SEC_LU		= 0xD,
+	DEVICE_DESC_PARAM_BKOP_TERM_LT		= 0xE,
+	DEVICE_DESC_PARAM_ACTVE_ICC_LVL		= 0xF,
+	DEVICE_DESC_PARAM_SPEC_VER		= 0x10,
+	DEVICE_DESC_PARAM_MANF_DATE		= 0x12,
+	DEVICE_DESC_PARAM_MANF_NAME		= 0x14,
+	DEVICE_DESC_PARAM_PRDCT_NAME		= 0x15,
+	DEVICE_DESC_PARAM_SN			= 0x16,
+	DEVICE_DESC_PARAM_OEM_ID		= 0x17,
+	DEVICE_DESC_PARAM_MANF_ID		= 0x18,
+	DEVICE_DESC_PARAM_UD_OFFSET		= 0x1A,
+	DEVICE_DESC_PARAM_UD_LEN		= 0x1B,
+	DEVICE_DESC_PARAM_RTT_CAP		= 0x1C,
+	DEVICE_DESC_PARAM_FRQ_RTC		= 0x1D,
+	DEVICE_DESC_PARAM_UFS_FEAT		= 0x1F,
+	DEVICE_DESC_PARAM_FFU_TMT		= 0x20,
+	DEVICE_DESC_PARAM_Q_DPTH		= 0x21,
+	DEVICE_DESC_PARAM_DEV_VER		= 0x22,
+	DEVICE_DESC_PARAM_NUM_SEC_WPA		= 0x24,
+	DEVICE_DESC_PARAM_PSA_MAX_DATA		= 0x25,
+	DEVICE_DESC_PARAM_PSA_TMT		= 0x29,
+	DEVICE_DESC_PARAM_PRDCT_REV		= 0x2A,
+	DEVICE_DESC_PARAM_HPB_VER		= 0x40,
+	DEVICE_DESC_PARAM_HPB_CONTROL		= 0x42,
+	DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP	= 0x4F,
+	DEVICE_DESC_PARAM_WB_PRESRV_USRSPC_EN	= 0x53,
+	DEVICE_DESC_PARAM_WB_TYPE		= 0x54,
+	DEVICE_DESC_PARAM_WB_SHARED_ALLOC_UNITS = 0x55,
+};
+
+/* Interconnect descriptor parameters offsets in bytes*/
+enum interconnect_desc_param {
+	INTERCONNECT_DESC_PARAM_LEN		= 0x0,
+	INTERCONNECT_DESC_PARAM_TYPE		= 0x1,
+	INTERCONNECT_DESC_PARAM_UNIPRO_VER	= 0x2,
+	INTERCONNECT_DESC_PARAM_MPHY_VER	= 0x4,
+};
+
+/* Geometry descriptor parameters offsets in bytes*/
+enum geometry_desc_param {
+	GEOMETRY_DESC_PARAM_LEN			= 0x0,
+	GEOMETRY_DESC_PARAM_TYPE		= 0x1,
+	GEOMETRY_DESC_PARAM_DEV_CAP		= 0x4,
+	GEOMETRY_DESC_PARAM_MAX_NUM_LUN		= 0xC,
+	GEOMETRY_DESC_PARAM_SEG_SIZE		= 0xD,
+	GEOMETRY_DESC_PARAM_ALLOC_UNIT_SIZE	= 0x11,
+	GEOMETRY_DESC_PARAM_MIN_BLK_SIZE	= 0x12,
+	GEOMETRY_DESC_PARAM_OPT_RD_BLK_SIZE	= 0x13,
+	GEOMETRY_DESC_PARAM_OPT_WR_BLK_SIZE	= 0x14,
+	GEOMETRY_DESC_PARAM_MAX_IN_BUF_SIZE	= 0x15,
+	GEOMETRY_DESC_PARAM_MAX_OUT_BUF_SIZE	= 0x16,
+	GEOMETRY_DESC_PARAM_RPMB_RW_SIZE	= 0x17,
+	GEOMETRY_DESC_PARAM_DYN_CAP_RSRC_PLC	= 0x18,
+	GEOMETRY_DESC_PARAM_DATA_ORDER		= 0x19,
+	GEOMETRY_DESC_PARAM_MAX_NUM_CTX		= 0x1A,
+	GEOMETRY_DESC_PARAM_TAG_UNIT_SIZE	= 0x1B,
+	GEOMETRY_DESC_PARAM_TAG_RSRC_SIZE	= 0x1C,
+	GEOMETRY_DESC_PARAM_SEC_RM_TYPES	= 0x1D,
+	GEOMETRY_DESC_PARAM_MEM_TYPES		= 0x1E,
+	GEOMETRY_DESC_PARAM_SCM_MAX_NUM_UNITS	= 0x20,
+	GEOMETRY_DESC_PARAM_SCM_CAP_ADJ_FCTR	= 0x24,
+	GEOMETRY_DESC_PARAM_NPM_MAX_NUM_UNITS	= 0x26,
+	GEOMETRY_DESC_PARAM_NPM_CAP_ADJ_FCTR	= 0x2A,
+	GEOMETRY_DESC_PARAM_ENM1_MAX_NUM_UNITS	= 0x2C,
+	GEOMETRY_DESC_PARAM_ENM1_CAP_ADJ_FCTR	= 0x30,
+	GEOMETRY_DESC_PARAM_ENM2_MAX_NUM_UNITS	= 0x32,
+	GEOMETRY_DESC_PARAM_ENM2_CAP_ADJ_FCTR	= 0x36,
+	GEOMETRY_DESC_PARAM_ENM3_MAX_NUM_UNITS	= 0x38,
+	GEOMETRY_DESC_PARAM_ENM3_CAP_ADJ_FCTR	= 0x3C,
+	GEOMETRY_DESC_PARAM_ENM4_MAX_NUM_UNITS	= 0x3E,
+	GEOMETRY_DESC_PARAM_ENM4_CAP_ADJ_FCTR	= 0x42,
+	GEOMETRY_DESC_PARAM_OPT_LOG_BLK_SIZE	= 0x44,
+	GEOMETRY_DESC_PARAM_HPB_REGION_SIZE	= 0x48,
+	GEOMETRY_DESC_PARAM_HPB_NUMBER_LU	= 0x49,
+	GEOMETRY_DESC_PARAM_HPB_SUBREGION_SIZE	= 0x4A,
+	GEOMETRY_DESC_PARAM_HPB_MAX_ACTIVE_REGS	= 0x4B,
+	GEOMETRY_DESC_PARAM_WB_MAX_ALLOC_UNITS	= 0x4F,
+	GEOMETRY_DESC_PARAM_WB_MAX_WB_LUNS	= 0x53,
+	GEOMETRY_DESC_PARAM_WB_BUFF_CAP_ADJ	= 0x54,
+	GEOMETRY_DESC_PARAM_WB_SUP_RED_TYPE	= 0x55,
+	GEOMETRY_DESC_PARAM_WB_SUP_WB_TYPE	= 0x56,
+};
+
+/* Health descriptor parameters offsets in bytes*/
+enum health_desc_param {
+	HEALTH_DESC_PARAM_LEN			= 0x0,
+	HEALTH_DESC_PARAM_TYPE			= 0x1,
+	HEALTH_DESC_PARAM_EOL_INFO		= 0x2,
+	HEALTH_DESC_PARAM_LIFE_TIME_EST_A	= 0x3,
+	HEALTH_DESC_PARAM_LIFE_TIME_EST_B	= 0x4,
+};
+
+/* WriteBooster buffer mode */
+enum {
+	WB_BUF_MODE_LU_DEDICATED	= 0x0,
+	WB_BUF_MODE_SHARED		= 0x1,
+};
+
+/*
+ * Logical Unit Write Protect
+ * 00h: LU not write protected
+ * 01h: LU write protected when fPowerOnWPEn =1
+ * 02h: LU permanently write protected when fPermanentWPEn =1
+ */
+enum ufs_lu_wp_type {
+	UFS_LU_NO_WP		= 0x00,
+	UFS_LU_POWER_ON_WP	= 0x01,
+	UFS_LU_PERM_WP		= 0x02,
+};
+
+/* bActiveICCLevel parameter current units */
+enum {
+	UFSHCD_NANO_AMP		= 0,
+	UFSHCD_MICRO_AMP	= 1,
+	UFSHCD_MILI_AMP		= 2,
+	UFSHCD_AMP		= 3,
+};
+
+/* Possible values for dExtendedUFSFeaturesSupport */
+enum {
+	UFS_DEV_LOW_TEMP_NOTIF		= BIT(4),
+	UFS_DEV_HIGH_TEMP_NOTIF		= BIT(5),
+	UFS_DEV_EXT_TEMP_NOTIF		= BIT(6),
+	UFS_DEV_HPB_SUPPORT		= BIT(7),
+	UFS_DEV_WRITE_BOOSTER_SUP	= BIT(8),
+};
+#define UFS_DEV_HPB_SUPPORT_VERSION		0x310
+
+#define POWER_DESC_MAX_ACTV_ICC_LVLS		16
+
+/* Attribute  bActiveICCLevel parameter bit masks definitions */
+#define ATTR_ICC_LVL_UNIT_OFFSET	14
+#define ATTR_ICC_LVL_UNIT_MASK		(0x3 << ATTR_ICC_LVL_UNIT_OFFSET)
+#define ATTR_ICC_LVL_VALUE_MASK		0x3FF
+
+/* Power descriptor parameters offsets in bytes */
+enum power_desc_param_offset {
+	PWR_DESC_LEN			= 0x0,
+	PWR_DESC_TYPE			= 0x1,
+	PWR_DESC_ACTIVE_LVLS_VCC_0	= 0x2,
+	PWR_DESC_ACTIVE_LVLS_VCCQ_0	= 0x22,
+	PWR_DESC_ACTIVE_LVLS_VCCQ2_0	= 0x42,
+};
+
+/* Exception event mask values */
+enum {
+	MASK_EE_STATUS			= 0xFFFF,
+	MASK_EE_DYNCAP_EVENT		= BIT(0),
+	MASK_EE_SYSPOOL_EVENT		= BIT(1),
+	MASK_EE_URGENT_BKOPS		= BIT(2),
+	MASK_EE_TOO_HIGH_TEMP		= BIT(3),
+	MASK_EE_TOO_LOW_TEMP		= BIT(4),
+	MASK_EE_WRITEBOOSTER_EVENT	= BIT(5),
+	MASK_EE_PERFORMANCE_THROTTLING	= BIT(6),
+};
+#define MASK_EE_URGENT_TEMP (MASK_EE_TOO_HIGH_TEMP | MASK_EE_TOO_LOW_TEMP)
+
+/* Background operation status */
+enum bkops_status {
+	BKOPS_STATUS_NO_OP               = 0x0,
+	BKOPS_STATUS_NON_CRITICAL        = 0x1,
+	BKOPS_STATUS_PERF_IMPACT         = 0x2,
+	BKOPS_STATUS_CRITICAL            = 0x3,
+	BKOPS_STATUS_MAX		 = BKOPS_STATUS_CRITICAL,
+};
+
+/* UTP QUERY Transaction Specific Fields OpCode */
+enum query_opcode {
+	UPIU_QUERY_OPCODE_NOP		= 0x0,
+	UPIU_QUERY_OPCODE_READ_DESC	= 0x1,
+	UPIU_QUERY_OPCODE_WRITE_DESC	= 0x2,
+	UPIU_QUERY_OPCODE_READ_ATTR	= 0x3,
+	UPIU_QUERY_OPCODE_WRITE_ATTR	= 0x4,
+	UPIU_QUERY_OPCODE_READ_FLAG	= 0x5,
+	UPIU_QUERY_OPCODE_SET_FLAG	= 0x6,
+	UPIU_QUERY_OPCODE_CLEAR_FLAG	= 0x7,
+	UPIU_QUERY_OPCODE_TOGGLE_FLAG	= 0x8,
+};
+
+/* bRefClkFreq attribute values */
+enum ufs_ref_clk_freq {
+	REF_CLK_FREQ_19_2_MHZ	= 0,
+	REF_CLK_FREQ_26_MHZ	= 1,
+	REF_CLK_FREQ_38_4_MHZ	= 2,
+	REF_CLK_FREQ_52_MHZ	= 3,
+	REF_CLK_FREQ_INVAL	= -1,
+};
+
+/* Query response result code */
+enum {
+	QUERY_RESULT_SUCCESS                    = 0x00,
+	QUERY_RESULT_NOT_READABLE               = 0xF6,
+	QUERY_RESULT_NOT_WRITEABLE              = 0xF7,
+	QUERY_RESULT_ALREADY_WRITTEN            = 0xF8,
+	QUERY_RESULT_INVALID_LENGTH             = 0xF9,
+	QUERY_RESULT_INVALID_VALUE              = 0xFA,
+	QUERY_RESULT_INVALID_SELECTOR           = 0xFB,
+	QUERY_RESULT_INVALID_INDEX              = 0xFC,
+	QUERY_RESULT_INVALID_IDN                = 0xFD,
+	QUERY_RESULT_INVALID_OPCODE             = 0xFE,
+	QUERY_RESULT_GENERAL_FAILURE            = 0xFF,
+};
+
+/* UTP Transfer Request Command Type (CT) */
+enum {
+	UPIU_COMMAND_SET_TYPE_SCSI	= 0x0,
+	UPIU_COMMAND_SET_TYPE_UFS	= 0x1,
+	UPIU_COMMAND_SET_TYPE_QUERY	= 0x2,
+};
+
+/* UTP Transfer Request Command Offset */
+#define UPIU_COMMAND_TYPE_OFFSET	28
+
+/* Offset of the response code in the UPIU header */
+#define UPIU_RSP_CODE_OFFSET		8
+
+enum {
+	MASK_SCSI_STATUS		= 0xFF,
+	MASK_TASK_RESPONSE              = 0xFF00,
+	MASK_RSP_UPIU_RESULT            = 0xFFFF,
+	MASK_QUERY_DATA_SEG_LEN         = 0xFFFF,
+	MASK_RSP_UPIU_DATA_SEG_LEN	= 0xFFFF,
+	MASK_RSP_EXCEPTION_EVENT        = 0x10000,
+	MASK_TM_SERVICE_RESP		= 0xFF,
+	MASK_TM_FUNC			= 0xFF,
+};
+
+/* Task management service response */
+enum {
+	UPIU_TASK_MANAGEMENT_FUNC_COMPL		= 0x00,
+	UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04,
+	UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED	= 0x08,
+	UPIU_TASK_MANAGEMENT_FUNC_FAILED	= 0x05,
+	UPIU_INCORRECT_LOGICAL_UNIT_NO		= 0x09,
+};
+
+/* UFS device power modes */
+enum ufs_dev_pwr_mode {
+	UFS_ACTIVE_PWR_MODE	= 1,
+	UFS_SLEEP_PWR_MODE	= 2,
+	UFS_POWERDOWN_PWR_MODE	= 3,
+	UFS_DEEPSLEEP_PWR_MODE	= 4,
+};
+
+#define UFS_WB_BUF_REMAIN_PERCENT(val) ((val) / 10)
+
+/**
+ * struct utp_cmd_rsp - Response UPIU structure
+ * @residual_transfer_count: Residual transfer count DW-3
+ * @reserved: Reserved double words DW-4 to DW-7
+ * @sense_data_len: Sense data length DW-8 U16
+ * @sense_data: Sense data field DW-8 to DW-12
+ */
+struct utp_cmd_rsp {
+	__be32 residual_transfer_count;
+	__be32 reserved[4];
+	__be16 sense_data_len;
+	u8 sense_data[UFS_SENSE_SIZE];
+};
+
+struct ufshpb_active_field {
+	__be16 active_rgn;
+	__be16 active_srgn;
+};
+#define HPB_ACT_FIELD_SIZE 4
+
+/**
+ * struct utp_hpb_rsp - Response UPIU structure
+ * @residual_transfer_count: Residual transfer count DW-3
+ * @reserved1: Reserved double words DW-4 to DW-7
+ * @sense_data_len: Sense data length DW-8 U16
+ * @desc_type: Descriptor type of sense data
+ * @additional_len: Additional length of sense data
+ * @hpb_op: HPB operation type
+ * @lun: LUN of response UPIU
+ * @active_rgn_cnt: Active region count
+ * @inactive_rgn_cnt: Inactive region count
+ * @hpb_active_field: Recommended to read HPB region and subregion
+ * @hpb_inactive_field: To be inactivated HPB region and subregion
+ */
+struct utp_hpb_rsp {
+	__be32 residual_transfer_count;
+	__be32 reserved1[4];
+	__be16 sense_data_len;
+	u8 desc_type;
+	u8 additional_len;
+	u8 hpb_op;
+	u8 lun;
+	u8 active_rgn_cnt;
+	u8 inactive_rgn_cnt;
+	struct ufshpb_active_field hpb_active_field[2];
+	__be16 hpb_inactive_field[2];
+};
+#define UTP_HPB_RSP_SIZE 40
+
+/**
+ * struct utp_upiu_rsp - general upiu response structure
+ * @header: UPIU header structure DW-0 to DW-2
+ * @sr: fields structure for scsi command DW-3 to DW-12
+ * @qr: fields structure for query request DW-3 to DW-7
+ */
+struct utp_upiu_rsp {
+	struct utp_upiu_header header;
+	union {
+		struct utp_cmd_rsp sr;
+		struct utp_hpb_rsp hr;
+		struct utp_upiu_query qr;
+	};
+};
+
+/**
+ * struct ufs_query_req - parameters for building a query request
+ * @query_func: UPIU header query function
+ * @upiu_req: the query request data
+ */
+struct ufs_query_req {
+	u8 query_func;
+	struct utp_upiu_query upiu_req;
+};
+
+/**
+ * struct ufs_query_resp - UPIU QUERY
+ * @response: device response code
+ * @upiu_res: query response data
+ */
+struct ufs_query_res {
+	u8 response;
+	struct utp_upiu_query upiu_res;
+};
+
+/*
+ * VCCQ & VCCQ2 current requirement when UFS device is in sleep state
+ * and link is in Hibern8 state.
+ */
+#define UFS_VREG_LPM_LOAD_UA	1000 /* uA */
+
+struct ufs_vreg {
+	struct regulator *reg;
+	const char *name;
+	bool always_on;
+	bool enabled;
+	int max_uA;
+};
+
+struct ufs_vreg_info {
+	struct ufs_vreg *vcc;
+	struct ufs_vreg *vccq;
+	struct ufs_vreg *vccq2;
+	struct ufs_vreg *vdd_hba;
+};
+
+struct ufs_dev_info {
+	bool	f_power_on_wp_en;
+	/* Keeps information if any of the LU is power on write protected */
+	bool	is_lu_power_on_wp;
+	/* Maximum number of general LU supported by the UFS device */
+	u8	max_lu_supported;
+	u16	wmanufacturerid;
+	/*UFS device Product Name */
+	u8	*model;
+	u16	wspecversion;
+	u32	clk_gating_wait_us;
+
+	/* UFS HPB related flag */
+	bool	hpb_enabled;
+
+	/* UFS WB related flags */
+	bool    wb_enabled;
+	bool    wb_buf_flush_enabled;
+	u8	wb_dedicated_lu;
+	u8      wb_buffer_type;
+
+	bool	b_rpm_dev_flush_capable;
+	u8	b_presrv_uspc_en;
+};
+
+/*
+ * This enum is used in string mapping in include/trace/events/ufs.h.
+ */
+enum ufs_trace_str_t {
+	UFS_CMD_SEND, UFS_CMD_COMP, UFS_DEV_COMP,
+	UFS_QUERY_SEND, UFS_QUERY_COMP, UFS_QUERY_ERR,
+	UFS_TM_SEND, UFS_TM_COMP, UFS_TM_ERR
+};
+
+/*
+ * Transaction Specific Fields (TSF) type in the UPIU package, this enum is
+ * used in include/trace/events/ufs.h for UFS command trace.
+ */
+enum ufs_trace_tsf_t {
+	UFS_TSF_CDB, UFS_TSF_OSF, UFS_TSF_TM_INPUT, UFS_TSF_TM_OUTPUT
+};
+
+#endif /* End of Header */
diff --git a/include/ufs/ufs_quirks.h b/include/ufs/ufs_quirks.h
new file mode 100644
index 000000000000..bcb4f004bed5
--- /dev/null
+++ b/include/ufs/ufs_quirks.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _UFS_QUIRKS_H_
+#define _UFS_QUIRKS_H_
+
+/* return true if s1 is a prefix of s2 */
+#define STR_PRFX_EQUAL(s1, s2) !strncmp(s1, s2, strlen(s1))
+
+#define UFS_ANY_VENDOR 0xFFFF
+#define UFS_ANY_MODEL  "ANY_MODEL"
+
+#define UFS_VENDOR_MICRON      0x12C
+#define UFS_VENDOR_SAMSUNG     0x1CE
+#define UFS_VENDOR_SKHYNIX     0x1AD
+#define UFS_VENDOR_TOSHIBA     0x198
+#define UFS_VENDOR_WDC         0x145
+
+/**
+ * ufs_dev_quirk - ufs device quirk info
+ * @card: ufs card details
+ * @quirk: device quirk
+ */
+struct ufs_dev_quirk {
+	u16 wmanufacturerid;
+	const u8 *model;
+	unsigned int quirk;
+};
+
+/*
+ * Some vendor's UFS device sends back to back NACs for the DL data frames
+ * causing the host controller to raise the DFES error status. Sometimes
+ * such UFS devices send back to back NAC without waiting for new
+ * retransmitted DL frame from the host and in such cases it might be possible
+ * the Host UniPro goes into bad state without raising the DFES error
+ * interrupt. If this happens then all the pending commands would timeout
+ * only after respective SW command (which is generally too large).
+ *
+ * We can workaround such device behaviour like this:
+ * - As soon as SW sees the DL NAC error, it should schedule the error handler
+ * - Error handler would sleep for 50ms to see if there are any fatal errors
+ *   raised by UFS controller.
+ *    - If there are fatal errors then SW does normal error recovery.
+ *    - If there are no fatal errors then SW sends the NOP command to device
+ *      to check if link is alive.
+ *        - If NOP command times out, SW does normal error recovery
+ *        - If NOP command succeed, skip the error handling.
+ *
+ * If DL NAC error is seen multiple times with some vendor's UFS devices then
+ * enable this quirk to initiate quick error recovery and also silence related
+ * error logs to reduce spamming of kernel logs.
+ */
+#define UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS (1 << 2)
+
+/*
+ * Few Toshiba UFS device models advertise RX_MIN_ACTIVATETIME_CAPABILITY as
+ * 600us which may not be enough for reliable hibern8 exit hardware sequence
+ * from UFS device.
+ * To workaround this issue, host should set its PA_TACTIVATE time to 1ms even
+ * if device advertises RX_MIN_ACTIVATETIME_CAPABILITY less than 1ms.
+ */
+#define UFS_DEVICE_QUIRK_PA_TACTIVATE	(1 << 4)
+
+/*
+ * It seems some UFS devices may keep drawing more than sleep current
+ * (atleast for 500us) from UFS rails (especially from VCCQ rail).
+ * To avoid this situation, add 2ms delay before putting these UFS
+ * rails in LPM mode.
+ */
+#define UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM	(1 << 6)
+
+/*
+ * Some UFS devices require host PA_TACTIVATE to be lower than device
+ * PA_TACTIVATE, enabling this quirk ensure this.
+ */
+#define UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE	(1 << 7)
+
+/*
+ * The max. value PA_SaveConfigTime is 250 (10us) but this is not enough for
+ * some vendors.
+ * Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime.
+ * Gear switch can be issued by host controller as an error recovery and any
+ * software delay will not help on this case so we need to increase
+ * PA_SaveConfigTime to >32us as per vendor recommendation.
+ */
+#define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME	(1 << 8)
+
+/*
+ * Some UFS devices require VS_DebugSaveConfigTime is 0x10,
+ * enabling this quirk ensure this.
+ */
+#define UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME	(1 << 9)
+
+/*
+ * Some pre-3.1 UFS devices can support extended features by upgrading
+ * the firmware. Enable this quirk to make UFS core driver probe and enable
+ * supported features on such devices.
+ */
+#define UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES (1 << 10)
+
+/*
+ * Some UFS devices require delay after VCC power rail is turned-off.
+ * Enable this quirk to introduce 5ms delays after VCC power-off during
+ * suspend flow.
+ */
+#define UFS_DEVICE_QUIRK_DELAY_AFTER_LPM        (1 << 11)
+
+/*
+ * Some UFS devices require L2P entry should be swapped before being sent to the
+ * UFS device for HPB READ command.
+ */
+#define UFS_DEVICE_QUIRK_SWAP_L2P_ENTRY_FOR_HPB_READ (1 << 12)
+
+#endif /* UFS_QUIRKS_H_ */
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
new file mode 100644
index 000000000000..a92271421718
--- /dev/null
+++ b/include/ufs/ufshcd.h
@@ -0,0 +1,1230 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Universal Flash Storage Host controller driver
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * Authors:
+ *	Santosh Yaraganavi <santosh.sy@samsung.com>
+ *	Vinayak Holikatti <h.vinayak@samsung.com>
+ */
+
+#ifndef _UFSHCD_H
+#define _UFSHCD_H
+
+#include <linux/bitfield.h>
+#include <linux/blk-crypto-profile.h>
+#include <linux/blk-mq.h>
+#include <linux/devfreq.h>
+#include <linux/pm_runtime.h>
+#include <scsi/scsi_device.h>
+#include <ufs/unipro.h>
+#include <ufs/ufs.h>
+#include <ufs/ufs_quirks.h>
+#include <ufs/ufshci.h>
+
+#define UFSHCD "ufshcd"
+
+struct ufs_hba;
+
+enum dev_cmd_type {
+	DEV_CMD_TYPE_NOP		= 0x0,
+	DEV_CMD_TYPE_QUERY		= 0x1,
+};
+
+enum ufs_event_type {
+	/* uic specific errors */
+	UFS_EVT_PA_ERR = 0,
+	UFS_EVT_DL_ERR,
+	UFS_EVT_NL_ERR,
+	UFS_EVT_TL_ERR,
+	UFS_EVT_DME_ERR,
+
+	/* fatal errors */
+	UFS_EVT_AUTO_HIBERN8_ERR,
+	UFS_EVT_FATAL_ERR,
+	UFS_EVT_LINK_STARTUP_FAIL,
+	UFS_EVT_RESUME_ERR,
+	UFS_EVT_SUSPEND_ERR,
+	UFS_EVT_WL_SUSP_ERR,
+	UFS_EVT_WL_RES_ERR,
+
+	/* abnormal events */
+	UFS_EVT_DEV_RESET,
+	UFS_EVT_HOST_RESET,
+	UFS_EVT_ABORT,
+
+	UFS_EVT_CNT,
+};
+
+/**
+ * struct uic_command - UIC command structure
+ * @command: UIC command
+ * @argument1: UIC command argument 1
+ * @argument2: UIC command argument 2
+ * @argument3: UIC command argument 3
+ * @cmd_active: Indicate if UIC command is outstanding
+ * @done: UIC command completion
+ */
+struct uic_command {
+	u32 command;
+	u32 argument1;
+	u32 argument2;
+	u32 argument3;
+	int cmd_active;
+	struct completion done;
+};
+
+/* Used to differentiate the power management options */
+enum ufs_pm_op {
+	UFS_RUNTIME_PM,
+	UFS_SYSTEM_PM,
+	UFS_SHUTDOWN_PM,
+};
+
+/* Host <-> Device UniPro Link state */
+enum uic_link_state {
+	UIC_LINK_OFF_STATE	= 0, /* Link powered down or disabled */
+	UIC_LINK_ACTIVE_STATE	= 1, /* Link is in Fast/Slow/Sleep state */
+	UIC_LINK_HIBERN8_STATE	= 2, /* Link is in Hibernate state */
+	UIC_LINK_BROKEN_STATE	= 3, /* Link is in broken state */
+};
+
+#define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE)
+#define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
+				    UIC_LINK_ACTIVE_STATE)
+#define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
+				    UIC_LINK_HIBERN8_STATE)
+#define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \
+				   UIC_LINK_BROKEN_STATE)
+#define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE)
+#define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
+				    UIC_LINK_ACTIVE_STATE)
+#define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
+				    UIC_LINK_HIBERN8_STATE)
+#define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \
+				    UIC_LINK_BROKEN_STATE)
+
+#define ufshcd_set_ufs_dev_active(h) \
+	((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
+#define ufshcd_set_ufs_dev_sleep(h) \
+	((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
+#define ufshcd_set_ufs_dev_poweroff(h) \
+	((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
+#define ufshcd_set_ufs_dev_deepsleep(h) \
+	((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE)
+#define ufshcd_is_ufs_dev_active(h) \
+	((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
+#define ufshcd_is_ufs_dev_sleep(h) \
+	((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
+#define ufshcd_is_ufs_dev_poweroff(h) \
+	((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
+#define ufshcd_is_ufs_dev_deepsleep(h) \
+	((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE)
+
+/*
+ * UFS Power management levels.
+ * Each level is in increasing order of power savings, except DeepSleep
+ * which is lower than PowerDown with power on but not PowerDown with
+ * power off.
+ */
+enum ufs_pm_level {
+	UFS_PM_LVL_0,
+	UFS_PM_LVL_1,
+	UFS_PM_LVL_2,
+	UFS_PM_LVL_3,
+	UFS_PM_LVL_4,
+	UFS_PM_LVL_5,
+	UFS_PM_LVL_6,
+	UFS_PM_LVL_MAX
+};
+
+struct ufs_pm_lvl_states {
+	enum ufs_dev_pwr_mode dev_state;
+	enum uic_link_state link_state;
+};
+
+/**
+ * struct ufshcd_lrb - local reference block
+ * @utr_descriptor_ptr: UTRD address of the command
+ * @ucd_req_ptr: UCD address of the command
+ * @ucd_rsp_ptr: Response UPIU address for this command
+ * @ucd_prdt_ptr: PRDT address of the command
+ * @utrd_dma_addr: UTRD dma address for debug
+ * @ucd_prdt_dma_addr: PRDT dma address for debug
+ * @ucd_rsp_dma_addr: UPIU response dma address for debug
+ * @ucd_req_dma_addr: UPIU request dma address for debug
+ * @cmd: pointer to SCSI command
+ * @scsi_status: SCSI status of the command
+ * @command_type: SCSI, UFS, Query.
+ * @task_tag: Task tag of the command
+ * @lun: LUN of the command
+ * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
+ * @issue_time_stamp: time stamp for debug purposes
+ * @compl_time_stamp: time stamp for statistics
+ * @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
+ * @data_unit_num: the data unit number for the first block for inline crypto
+ * @req_abort_skip: skip request abort task flag
+ */
+struct ufshcd_lrb {
+	struct utp_transfer_req_desc *utr_descriptor_ptr;
+	struct utp_upiu_req *ucd_req_ptr;
+	struct utp_upiu_rsp *ucd_rsp_ptr;
+	struct ufshcd_sg_entry *ucd_prdt_ptr;
+
+	dma_addr_t utrd_dma_addr;
+	dma_addr_t ucd_req_dma_addr;
+	dma_addr_t ucd_rsp_dma_addr;
+	dma_addr_t ucd_prdt_dma_addr;
+
+	struct scsi_cmnd *cmd;
+	int scsi_status;
+
+	int command_type;
+	int task_tag;
+	u8 lun; /* UPIU LUN id field is only 8-bit wide */
+	bool intr_cmd;
+	ktime_t issue_time_stamp;
+	ktime_t compl_time_stamp;
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+	int crypto_key_slot;
+	u64 data_unit_num;
+#endif
+
+	bool req_abort_skip;
+};
+
+/**
+ * struct ufs_query - holds relevant data structures for query request
+ * @request: request upiu and function
+ * @descriptor: buffer for sending/receiving descriptor
+ * @response: response upiu and response
+ */
+struct ufs_query {
+	struct ufs_query_req request;
+	u8 *descriptor;
+	struct ufs_query_res response;
+};
+
+/**
+ * struct ufs_dev_cmd - all assosiated fields with device management commands
+ * @type: device management command type - Query, NOP OUT
+ * @lock: lock to allow one command at a time
+ * @complete: internal commands completion
+ * @query: Device management query information
+ */
+struct ufs_dev_cmd {
+	enum dev_cmd_type type;
+	struct mutex lock;
+	struct completion *complete;
+	struct ufs_query query;
+};
+
+/**
+ * struct ufs_clk_info - UFS clock related info
+ * @list: list headed by hba->clk_list_head
+ * @clk: clock node
+ * @name: clock name
+ * @max_freq: maximum frequency supported by the clock
+ * @min_freq: min frequency that can be used for clock scaling
+ * @curr_freq: indicates the current frequency that it is set to
+ * @keep_link_active: indicates that the clk should not be disabled if
+ *		      link is active
+ * @enabled: variable to check against multiple enable/disable
+ */
+struct ufs_clk_info {
+	struct list_head list;
+	struct clk *clk;
+	const char *name;
+	u32 max_freq;
+	u32 min_freq;
+	u32 curr_freq;
+	bool keep_link_active;
+	bool enabled;
+};
+
+enum ufs_notify_change_status {
+	PRE_CHANGE,
+	POST_CHANGE,
+};
+
+struct ufs_pa_layer_attr {
+	u32 gear_rx;
+	u32 gear_tx;
+	u32 lane_rx;
+	u32 lane_tx;
+	u32 pwr_rx;
+	u32 pwr_tx;
+	u32 hs_rate;
+};
+
+struct ufs_pwr_mode_info {
+	bool is_valid;
+	struct ufs_pa_layer_attr info;
+};
+
+/**
+ * struct ufs_hba_variant_ops - variant specific callbacks
+ * @name: variant name
+ * @init: called when the driver is initialized
+ * @exit: called to cleanup everything done in init
+ * @get_ufs_hci_version: called to get UFS HCI version
+ * @clk_scale_notify: notifies that clks are scaled up/down
+ * @setup_clocks: called before touching any of the controller registers
+ * @hce_enable_notify: called before and after HCE enable bit is set to allow
+ *                     variant specific Uni-Pro initialization.
+ * @link_startup_notify: called before and after Link startup is carried out
+ *                       to allow variant specific Uni-Pro initialization.
+ * @pwr_change_notify: called before and after a power mode change
+ *			is carried out to allow vendor spesific capabilities
+ *			to be set.
+ * @setup_xfer_req: called before any transfer request is issued
+ *                  to set some things
+ * @setup_task_mgmt: called before any task management request is issued
+ *                  to set some things
+ * @hibern8_notify: called around hibern8 enter/exit
+ * @apply_dev_quirks: called to apply device specific quirks
+ * @fixup_dev_quirks: called to modify device specific quirks
+ * @suspend: called during host controller PM callback
+ * @resume: called during host controller PM callback
+ * @dbg_register_dump: used to dump controller debug information
+ * @phy_initialization: used to initialize phys
+ * @device_reset: called to issue a reset pulse on the UFS device
+ * @config_scaling_param: called to configure clock scaling parameters
+ * @program_key: program or evict an inline encryption key
+ * @event_notify: called to notify important events
+ */
+struct ufs_hba_variant_ops {
+	const char *name;
+	int	(*init)(struct ufs_hba *);
+	void    (*exit)(struct ufs_hba *);
+	u32	(*get_ufs_hci_version)(struct ufs_hba *);
+	int	(*clk_scale_notify)(struct ufs_hba *, bool,
+				    enum ufs_notify_change_status);
+	int	(*setup_clocks)(struct ufs_hba *, bool,
+				enum ufs_notify_change_status);
+	int	(*hce_enable_notify)(struct ufs_hba *,
+				     enum ufs_notify_change_status);
+	int	(*link_startup_notify)(struct ufs_hba *,
+				       enum ufs_notify_change_status);
+	int	(*pwr_change_notify)(struct ufs_hba *,
+					enum ufs_notify_change_status status,
+					struct ufs_pa_layer_attr *,
+					struct ufs_pa_layer_attr *);
+	void	(*setup_xfer_req)(struct ufs_hba *hba, int tag,
+				  bool is_scsi_cmd);
+	void	(*setup_task_mgmt)(struct ufs_hba *, int, u8);
+	void    (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme,
+					enum ufs_notify_change_status);
+	int	(*apply_dev_quirks)(struct ufs_hba *hba);
+	void	(*fixup_dev_quirks)(struct ufs_hba *hba);
+	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op,
+					enum ufs_notify_change_status);
+	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
+	void	(*dbg_register_dump)(struct ufs_hba *hba);
+	int	(*phy_initialization)(struct ufs_hba *);
+	int	(*device_reset)(struct ufs_hba *hba);
+	void	(*config_scaling_param)(struct ufs_hba *hba,
+				struct devfreq_dev_profile *profile,
+				struct devfreq_simple_ondemand_data *data);
+	int	(*program_key)(struct ufs_hba *hba,
+			       const union ufs_crypto_cfg_entry *cfg, int slot);
+	void	(*event_notify)(struct ufs_hba *hba,
+				enum ufs_event_type evt, void *data);
+};
+
+/* clock gating state  */
+enum clk_gating_state {
+	CLKS_OFF,
+	CLKS_ON,
+	REQ_CLKS_OFF,
+	REQ_CLKS_ON,
+};
+
+/**
+ * struct ufs_clk_gating - UFS clock gating related info
+ * @gate_work: worker to turn off clocks after some delay as specified in
+ * delay_ms
+ * @ungate_work: worker to turn on clocks that will be used in case of
+ * interrupt context
+ * @state: the current clocks state
+ * @delay_ms: gating delay in ms
+ * @is_suspended: clk gating is suspended when set to 1 which can be used
+ * during suspend/resume
+ * @delay_attr: sysfs attribute to control delay_attr
+ * @enable_attr: sysfs attribute to enable/disable clock gating
+ * @is_enabled: Indicates the current status of clock gating
+ * @is_initialized: Indicates whether clock gating is initialized or not
+ * @active_reqs: number of requests that are pending and should be waited for
+ * completion before gating clocks.
+ * @clk_gating_workq: workqueue for clock gating work.
+ */
+struct ufs_clk_gating {
+	struct delayed_work gate_work;
+	struct work_struct ungate_work;
+	enum clk_gating_state state;
+	unsigned long delay_ms;
+	bool is_suspended;
+	struct device_attribute delay_attr;
+	struct device_attribute enable_attr;
+	bool is_enabled;
+	bool is_initialized;
+	int active_reqs;
+	struct workqueue_struct *clk_gating_workq;
+};
+
+struct ufs_saved_pwr_info {
+	struct ufs_pa_layer_attr info;
+	bool is_valid;
+};
+
+/**
+ * struct ufs_clk_scaling - UFS clock scaling related data
+ * @active_reqs: number of requests that are pending. If this is zero when
+ * devfreq ->target() function is called then schedule "suspend_work" to
+ * suspend devfreq.
+ * @tot_busy_t: Total busy time in current polling window
+ * @window_start_t: Start time (in jiffies) of the current polling window
+ * @busy_start_t: Start time of current busy period
+ * @enable_attr: sysfs attribute to enable/disable clock scaling
+ * @saved_pwr_info: UFS power mode may also be changed during scaling and this
+ * one keeps track of previous power mode.
+ * @workq: workqueue to schedule devfreq suspend/resume work
+ * @suspend_work: worker to suspend devfreq
+ * @resume_work: worker to resume devfreq
+ * @min_gear: lowest HS gear to scale down to
+ * @is_enabled: tracks if scaling is currently enabled or not, controlled by
+ *		clkscale_enable sysfs node
+ * @is_allowed: tracks if scaling is currently allowed or not, used to block
+ *		clock scaling which is not invoked from devfreq governor
+ * @is_initialized: Indicates whether clock scaling is initialized or not
+ * @is_busy_started: tracks if busy period has started or not
+ * @is_suspended: tracks if devfreq is suspended or not
+ */
+struct ufs_clk_scaling {
+	int active_reqs;
+	unsigned long tot_busy_t;
+	ktime_t window_start_t;
+	ktime_t busy_start_t;
+	struct device_attribute enable_attr;
+	struct ufs_saved_pwr_info saved_pwr_info;
+	struct workqueue_struct *workq;
+	struct work_struct suspend_work;
+	struct work_struct resume_work;
+	u32 min_gear;
+	bool is_enabled;
+	bool is_allowed;
+	bool is_initialized;
+	bool is_busy_started;
+	bool is_suspended;
+};
+
+#define UFS_EVENT_HIST_LENGTH 8
+/**
+ * struct ufs_event_hist - keeps history of errors
+ * @pos: index to indicate cyclic buffer position
+ * @val: cyclic buffer for registers value
+ * @tstamp: cyclic buffer for time stamp
+ * @cnt: error counter
+ */
+struct ufs_event_hist {
+	int pos;
+	u32 val[UFS_EVENT_HIST_LENGTH];
+	ktime_t tstamp[UFS_EVENT_HIST_LENGTH];
+	unsigned long long cnt;
+};
+
+/**
+ * struct ufs_stats - keeps usage/err statistics
+ * @last_intr_status: record the last interrupt status.
+ * @last_intr_ts: record the last interrupt timestamp.
+ * @hibern8_exit_cnt: Counter to keep track of number of exits,
+ *		reset this after link-startup.
+ * @last_hibern8_exit_tstamp: Set time after the hibern8 exit.
+ *		Clear after the first successful command completion.
+ * @event: array with event history.
+ */
+struct ufs_stats {
+	u32 last_intr_status;
+	ktime_t last_intr_ts;
+
+	u32 hibern8_exit_cnt;
+	ktime_t last_hibern8_exit_tstamp;
+	struct ufs_event_hist event[UFS_EVT_CNT];
+};
+
+/**
+ * enum ufshcd_state - UFS host controller state
+ * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command
+ *	processing.
+ * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process
+ *	SCSI commands.
+ * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled.
+ *	SCSI commands may be submitted to the controller.
+ * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail
+ *	newly submitted SCSI commands with error code DID_BAD_TARGET.
+ * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery
+ *	failed. Fail all SCSI commands with error code DID_ERROR.
+ */
+enum ufshcd_state {
+	UFSHCD_STATE_RESET,
+	UFSHCD_STATE_OPERATIONAL,
+	UFSHCD_STATE_EH_SCHEDULED_NON_FATAL,
+	UFSHCD_STATE_EH_SCHEDULED_FATAL,
+	UFSHCD_STATE_ERROR,
+};
+
+enum ufshcd_quirks {
+	/* Interrupt aggregation support is broken */
+	UFSHCD_QUIRK_BROKEN_INTR_AGGR			= 1 << 0,
+
+	/*
+	 * delay before each dme command is required as the unipro
+	 * layer has shown instabilities
+	 */
+	UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS		= 1 << 1,
+
+	/*
+	 * If UFS host controller is having issue in processing LCC (Line
+	 * Control Command) coming from device then enable this quirk.
+	 * When this quirk is enabled, host controller driver should disable
+	 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
+	 * attribute of device to 0).
+	 */
+	UFSHCD_QUIRK_BROKEN_LCC				= 1 << 2,
+
+	/*
+	 * The attribute PA_RXHSUNTERMCAP specifies whether or not the
+	 * inbound Link supports unterminated line in HS mode. Setting this
+	 * attribute to 1 fixes moving to HS gear.
+	 */
+	UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP		= 1 << 3,
+
+	/*
+	 * This quirk needs to be enabled if the host controller only allows
+	 * accessing the peer dme attributes in AUTO mode (FAST AUTO or
+	 * SLOW AUTO).
+	 */
+	UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE		= 1 << 4,
+
+	/*
+	 * This quirk needs to be enabled if the host controller doesn't
+	 * advertise the correct version in UFS_VER register. If this quirk
+	 * is enabled, standard UFS host driver will call the vendor specific
+	 * ops (get_ufs_hci_version) to get the correct version.
+	 */
+	UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		= 1 << 5,
+
+	/*
+	 * Clear handling for transfer/task request list is just opposite.
+	 */
+	UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR		= 1 << 6,
+
+	/*
+	 * This quirk needs to be enabled if host controller doesn't allow
+	 * that the interrupt aggregation timer and counter are reset by s/w.
+	 */
+	UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR		= 1 << 7,
+
+	/*
+	 * This quirks needs to be enabled if host controller cannot be
+	 * enabled via HCE register.
+	 */
+	UFSHCI_QUIRK_BROKEN_HCE				= 1 << 8,
+
+	/*
+	 * This quirk needs to be enabled if the host controller regards
+	 * resolution of the values of PRDTO and PRDTL in UTRD as byte.
+	 */
+	UFSHCD_QUIRK_PRDT_BYTE_GRAN			= 1 << 9,
+
+	/*
+	 * This quirk needs to be enabled if the host controller reports
+	 * OCS FATAL ERROR with device error through sense data
+	 */
+	UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR		= 1 << 10,
+
+	/*
+	 * This quirk needs to be enabled if the host controller has
+	 * auto-hibernate capability but it doesn't work.
+	 */
+	UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8		= 1 << 11,
+
+	/*
+	 * This quirk needs to disable manual flush for write booster
+	 */
+	UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL		= 1 << 12,
+
+	/*
+	 * This quirk needs to disable unipro timeout values
+	 * before power mode change
+	 */
+	UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13,
+
+	/*
+	 * This quirk allows only sg entries aligned with page size.
+	 */
+	UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE		= 1 << 14,
+
+	/*
+	 * This quirk needs to be enabled if the host controller does not
+	 * support UIC command
+	 */
+	UFSHCD_QUIRK_BROKEN_UIC_CMD			= 1 << 15,
+
+	/*
+	 * This quirk needs to be enabled if the host controller cannot
+	 * support physical host configuration.
+	 */
+	UFSHCD_QUIRK_SKIP_PH_CONFIGURATION		= 1 << 16,
+};
+
+enum ufshcd_caps {
+	/* Allow dynamic clk gating */
+	UFSHCD_CAP_CLK_GATING				= 1 << 0,
+
+	/* Allow hiberb8 with clk gating */
+	UFSHCD_CAP_HIBERN8_WITH_CLK_GATING		= 1 << 1,
+
+	/* Allow dynamic clk scaling */
+	UFSHCD_CAP_CLK_SCALING				= 1 << 2,
+
+	/* Allow auto bkops to enabled during runtime suspend */
+	UFSHCD_CAP_AUTO_BKOPS_SUSPEND			= 1 << 3,
+
+	/*
+	 * This capability allows host controller driver to use the UFS HCI's
+	 * interrupt aggregation capability.
+	 * CAUTION: Enabling this might reduce overall UFS throughput.
+	 */
+	UFSHCD_CAP_INTR_AGGR				= 1 << 4,
+
+	/*
+	 * This capability allows the device auto-bkops to be always enabled
+	 * except during suspend (both runtime and suspend).
+	 * Enabling this capability means that device will always be allowed
+	 * to do background operation when it's active but it might degrade
+	 * the performance of ongoing read/write operations.
+	 */
+	UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
+
+	/*
+	 * This capability allows host controller driver to automatically
+	 * enable runtime power management by itself instead of waiting
+	 * for userspace to control the power management.
+	 */
+	UFSHCD_CAP_RPM_AUTOSUSPEND			= 1 << 6,
+
+	/*
+	 * This capability allows the host controller driver to turn-on
+	 * WriteBooster, if the underlying device supports it and is
+	 * provisioned to be used. This would increase the write performance.
+	 */
+	UFSHCD_CAP_WB_EN				= 1 << 7,
+
+	/*
+	 * This capability allows the host controller driver to use the
+	 * inline crypto engine, if it is present
+	 */
+	UFSHCD_CAP_CRYPTO				= 1 << 8,
+
+	/*
+	 * This capability allows the controller regulators to be put into
+	 * lpm mode aggressively during clock gating.
+	 * This would increase power savings.
+	 */
+	UFSHCD_CAP_AGGR_POWER_COLLAPSE			= 1 << 9,
+
+	/*
+	 * This capability allows the host controller driver to use DeepSleep,
+	 * if it is supported by the UFS device. The host controller driver must
+	 * support device hardware reset via the hba->device_reset() callback,
+	 * in order to exit DeepSleep state.
+	 */
+	UFSHCD_CAP_DEEPSLEEP				= 1 << 10,
+
+	/*
+	 * This capability allows the host controller driver to use temperature
+	 * notification if it is supported by the UFS device.
+	 */
+	UFSHCD_CAP_TEMP_NOTIF				= 1 << 11,
+};
+
+struct ufs_hba_variant_params {
+	struct devfreq_dev_profile devfreq_profile;
+	struct devfreq_simple_ondemand_data ondemand_data;
+	u16 hba_enable_delay_us;
+	u32 wb_flush_threshold;
+};
+
+#ifdef CONFIG_SCSI_UFS_HPB
+/**
+ * struct ufshpb_dev_info - UFSHPB device related info
+ * @num_lu: the number of user logical unit to check whether all lu finished
+ *          initialization
+ * @rgn_size: device reported HPB region size
+ * @srgn_size: device reported HPB sub-region size
+ * @slave_conf_cnt: counter to check all lu finished initialization
+ * @hpb_disabled: flag to check if HPB is disabled
+ * @max_hpb_single_cmd: device reported bMAX_DATA_SIZE_FOR_SINGLE_CMD value
+ * @is_legacy: flag to check HPB 1.0
+ * @control_mode: either host or device
+ */
+struct ufshpb_dev_info {
+	int num_lu;
+	int rgn_size;
+	int srgn_size;
+	atomic_t slave_conf_cnt;
+	bool hpb_disabled;
+	u8 max_hpb_single_cmd;
+	bool is_legacy;
+	u8 control_mode;
+};
+#endif
+
+struct ufs_hba_monitor {
+	unsigned long chunk_size;
+
+	unsigned long nr_sec_rw[2];
+	ktime_t total_busy[2];
+
+	unsigned long nr_req[2];
+	/* latencies*/
+	ktime_t lat_sum[2];
+	ktime_t lat_max[2];
+	ktime_t lat_min[2];
+
+	u32 nr_queued[2];
+	ktime_t busy_start_ts[2];
+
+	ktime_t enabled_ts;
+	bool enabled;
+};
+
+/**
+ * struct ufs_hba - per adapter private structure
+ * @mmio_base: UFSHCI base register address
+ * @ucdl_base_addr: UFS Command Descriptor base address
+ * @utrdl_base_addr: UTP Transfer Request Descriptor base address
+ * @utmrdl_base_addr: UTP Task Management Descriptor base address
+ * @ucdl_dma_addr: UFS Command Descriptor DMA address
+ * @utrdl_dma_addr: UTRDL DMA address
+ * @utmrdl_dma_addr: UTMRDL DMA address
+ * @host: Scsi_Host instance of the driver
+ * @dev: device handle
+ * @ufs_device_wlun: WLUN that controls the entire UFS device.
+ * @hwmon_device: device instance registered with the hwmon core.
+ * @curr_dev_pwr_mode: active UFS device power mode.
+ * @uic_link_state: active state of the link to the UFS device.
+ * @rpm_lvl: desired UFS power management level during runtime PM.
+ * @spm_lvl: desired UFS power management level during system PM.
+ * @pm_op_in_progress: whether or not a PM operation is in progress.
+ * @ahit: value of Auto-Hibernate Idle Timer register.
+ * @lrb: local reference block
+ * @outstanding_tasks: Bits representing outstanding task requests
+ * @outstanding_lock: Protects @outstanding_reqs.
+ * @outstanding_reqs: Bits representing outstanding transfer requests
+ * @capabilities: UFS Controller Capabilities
+ * @nutrs: Transfer Request Queue depth supported by controller
+ * @nutmrs: Task Management Queue depth supported by controller
+ * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock.
+ * @ufs_version: UFS Version to which controller complies
+ * @vops: pointer to variant specific operations
+ * @vps: pointer to variant specific parameters
+ * @priv: pointer to variant specific private data
+ * @irq: Irq number of the controller
+ * @is_irq_enabled: whether or not the UFS controller interrupt is enabled.
+ * @dev_ref_clk_freq: reference clock frequency
+ * @quirks: bitmask with information about deviations from the UFSHCI standard.
+ * @dev_quirks: bitmask with information about deviations from the UFS standard.
+ * @tmf_tag_set: TMF tag set.
+ * @tmf_queue: Used to allocate TMF tags.
+ * @tmf_rqs: array with pointers to TMF requests while these are in progress.
+ * @active_uic_cmd: handle of active UIC command
+ * @uic_cmd_mutex: mutex for UIC command
+ * @uic_async_done: completion used during UIC processing
+ * @ufshcd_state: UFSHCD state
+ * @eh_flags: Error handling flags
+ * @intr_mask: Interrupt Mask Bits
+ * @ee_ctrl_mask: Exception event control mask
+ * @ee_drv_mask: Exception event mask for driver
+ * @ee_usr_mask: Exception event mask for user (set via debugfs)
+ * @ee_ctrl_mutex: Used to serialize exception event information.
+ * @is_powered: flag to check if HBA is powered
+ * @shutting_down: flag to check if shutdown has been invoked
+ * @host_sem: semaphore used to serialize concurrent contexts
+ * @eh_wq: Workqueue that eh_work works on
+ * @eh_work: Worker to handle UFS errors that require s/w attention
+ * @eeh_work: Worker to handle exception events
+ * @errors: HBA errors
+ * @uic_error: UFS interconnect layer error status
+ * @saved_err: sticky error mask
+ * @saved_uic_err: sticky UIC error mask
+ * @ufs_stats: various error counters
+ * @force_reset: flag to force eh_work perform a full reset
+ * @force_pmc: flag to force a power mode change
+ * @silence_err_logs: flag to silence error logs
+ * @dev_cmd: ufs device management command information
+ * @last_dme_cmd_tstamp: time stamp of the last completed DME command
+ * @nop_out_timeout: NOP OUT timeout value
+ * @dev_info: information about the UFS device
+ * @auto_bkops_enabled: to track whether bkops is enabled in device
+ * @vreg_info: UFS device voltage regulator information
+ * @clk_list_head: UFS host controller clocks list node head
+ * @req_abort_count: number of times ufshcd_abort() has been called
+ * @lanes_per_direction: number of lanes per data direction between the UFS
+ *	controller and the UFS device.
+ * @pwr_info: holds current power mode
+ * @max_pwr_info: keeps the device max valid pwm
+ * @clk_gating: information related to clock gating
+ * @caps: bitmask with information about UFS controller capabilities
+ * @devfreq: frequency scaling information owned by the devfreq core
+ * @clk_scaling: frequency scaling information owned by the UFS driver
+ * @is_sys_suspended: whether or not the entire system has been suspended
+ * @urgent_bkops_lvl: keeps track of urgent bkops level for device
+ * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for
+ *  device is known or not.
+ * @clk_scaling_lock: used to serialize device commands and clock scaling
+ * @desc_size: descriptor sizes reported by device
+ * @scsi_block_reqs_cnt: reference counting for scsi block requests
+ * @bsg_dev: struct device associated with the BSG queue
+ * @bsg_queue: BSG queue associated with the UFS controller
+ * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power
+ *	management) after the UFS device has finished a WriteBooster buffer
+ *	flush or auto BKOP.
+ * @ufshpb_dev: information related to HPB (Host Performance Booster).
+ * @monitor: statistics about UFS commands
+ * @crypto_capabilities: Content of crypto capabilities register (0x100)
+ * @crypto_cap_array: Array of crypto capabilities
+ * @crypto_cfg_register: Start of the crypto cfg array
+ * @crypto_profile: the crypto profile of this hba (if applicable)
+ * @debugfs_root: UFS controller debugfs root directory
+ * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay
+ * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore
+ *	ee_ctrl_mask
+ * @luns_avail: number of regular and well known LUNs supported by the UFS
+ *	device
+ * @complete_put: whether or not to call ufshcd_rpm_put() from inside
+ *	ufshcd_resume_complete()
+ */
+struct ufs_hba {
+	void __iomem *mmio_base;
+
+	/* Virtual memory reference */
+	struct utp_transfer_cmd_desc *ucdl_base_addr;
+	struct utp_transfer_req_desc *utrdl_base_addr;
+	struct utp_task_req_desc *utmrdl_base_addr;
+
+	/* DMA memory reference */
+	dma_addr_t ucdl_dma_addr;
+	dma_addr_t utrdl_dma_addr;
+	dma_addr_t utmrdl_dma_addr;
+
+	struct Scsi_Host *host;
+	struct device *dev;
+	struct scsi_device *ufs_device_wlun;
+
+#ifdef CONFIG_SCSI_UFS_HWMON
+	struct device *hwmon_device;
+#endif
+
+	enum ufs_dev_pwr_mode curr_dev_pwr_mode;
+	enum uic_link_state uic_link_state;
+	/* Desired UFS power management level during runtime PM */
+	enum ufs_pm_level rpm_lvl;
+	/* Desired UFS power management level during system PM */
+	enum ufs_pm_level spm_lvl;
+	int pm_op_in_progress;
+
+	/* Auto-Hibernate Idle Timer register value */
+	u32 ahit;
+
+	struct ufshcd_lrb *lrb;
+
+	unsigned long outstanding_tasks;
+	spinlock_t outstanding_lock;
+	unsigned long outstanding_reqs;
+
+	u32 capabilities;
+	int nutrs;
+	int nutmrs;
+	u32 reserved_slot;
+	u32 ufs_version;
+	const struct ufs_hba_variant_ops *vops;
+	struct ufs_hba_variant_params *vps;
+	void *priv;
+	unsigned int irq;
+	bool is_irq_enabled;
+	enum ufs_ref_clk_freq dev_ref_clk_freq;
+
+	unsigned int quirks;	/* Deviations from standard UFSHCI spec. */
+
+	/* Device deviations from standard UFS device spec. */
+	unsigned int dev_quirks;
+
+	struct blk_mq_tag_set tmf_tag_set;
+	struct request_queue *tmf_queue;
+	struct request **tmf_rqs;
+
+	struct uic_command *active_uic_cmd;
+	struct mutex uic_cmd_mutex;
+	struct completion *uic_async_done;
+
+	enum ufshcd_state ufshcd_state;
+	u32 eh_flags;
+	u32 intr_mask;
+	u16 ee_ctrl_mask;
+	u16 ee_drv_mask;
+	u16 ee_usr_mask;
+	struct mutex ee_ctrl_mutex;
+	bool is_powered;
+	bool shutting_down;
+	struct semaphore host_sem;
+
+	/* Work Queues */
+	struct workqueue_struct *eh_wq;
+	struct work_struct eh_work;
+	struct work_struct eeh_work;
+
+	/* HBA Errors */
+	u32 errors;
+	u32 uic_error;
+	u32 saved_err;
+	u32 saved_uic_err;
+	struct ufs_stats ufs_stats;
+	bool force_reset;
+	bool force_pmc;
+	bool silence_err_logs;
+
+	/* Device management request data */
+	struct ufs_dev_cmd dev_cmd;
+	ktime_t last_dme_cmd_tstamp;
+	int nop_out_timeout;
+
+	/* Keeps information of the UFS device connected to this host */
+	struct ufs_dev_info dev_info;
+	bool auto_bkops_enabled;
+	struct ufs_vreg_info vreg_info;
+	struct list_head clk_list_head;
+
+	/* Number of requests aborts */
+	int req_abort_count;
+
+	/* Number of lanes available (1 or 2) for Rx/Tx */
+	u32 lanes_per_direction;
+	struct ufs_pa_layer_attr pwr_info;
+	struct ufs_pwr_mode_info max_pwr_info;
+
+	struct ufs_clk_gating clk_gating;
+	/* Control to enable/disable host capabilities */
+	u32 caps;
+
+	struct devfreq *devfreq;
+	struct ufs_clk_scaling clk_scaling;
+	bool is_sys_suspended;
+
+	enum bkops_status urgent_bkops_lvl;
+	bool is_urgent_bkops_lvl_checked;
+
+	struct rw_semaphore clk_scaling_lock;
+	unsigned char desc_size[QUERY_DESC_IDN_MAX];
+	atomic_t scsi_block_reqs_cnt;
+
+	struct device		bsg_dev;
+	struct request_queue	*bsg_queue;
+	struct delayed_work rpm_dev_flush_recheck_work;
+
+#ifdef CONFIG_SCSI_UFS_HPB
+	struct ufshpb_dev_info ufshpb_dev;
+#endif
+
+	struct ufs_hba_monitor	monitor;
+
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+	union ufs_crypto_capabilities crypto_capabilities;
+	union ufs_crypto_cap_entry *crypto_cap_array;
+	u32 crypto_cfg_register;
+	struct blk_crypto_profile crypto_profile;
+#endif
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_root;
+	struct delayed_work debugfs_ee_work;
+	u32 debugfs_ee_rate_limit_ms;
+#endif
+	u32 luns_avail;
+	bool complete_put;
+};
+
+/* Returns true if clocks can be gated. Otherwise false */
+static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_CLK_GATING;
+}
+static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
+}
+static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_CLK_SCALING;
+}
+static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
+}
+static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND;
+}
+
+static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
+{
+	return (hba->caps & UFSHCD_CAP_INTR_AGGR) &&
+		!(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR);
+}
+
+static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba)
+{
+	return !!(ufshcd_is_link_hibern8(hba) &&
+		  (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE));
+}
+
+static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba)
+{
+	return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) &&
+		!(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8);
+}
+
+static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba)
+{
+	return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit);
+}
+
+static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba)
+{
+	return hba->caps & UFSHCD_CAP_WB_EN;
+}
+
+#define ufshcd_writel(hba, val, reg)	\
+	writel((val), (hba)->mmio_base + (reg))
+#define ufshcd_readl(hba, reg)	\
+	readl((hba)->mmio_base + (reg))
+
+/**
+ * ufshcd_rmwl - perform read/modify/write for a controller register
+ * @hba: per adapter instance
+ * @mask: mask to apply on read value
+ * @val: actual value to write
+ * @reg: register address
+ */
+static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
+{
+	u32 tmp;
+
+	tmp = ufshcd_readl(hba, reg);
+	tmp &= ~mask;
+	tmp |= (val & mask);
+	ufshcd_writel(hba, tmp, reg);
+}
+
+int ufshcd_alloc_host(struct device *, struct ufs_hba **);
+void ufshcd_dealloc_host(struct ufs_hba *);
+int ufshcd_hba_enable(struct ufs_hba *hba);
+int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int);
+int ufshcd_link_recovery(struct ufs_hba *hba);
+int ufshcd_make_hba_operational(struct ufs_hba *hba);
+void ufshcd_remove(struct ufs_hba *);
+int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
+int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
+void ufshcd_delay_us(unsigned long us, unsigned long tolerance);
+void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk);
+void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val);
+void ufshcd_hba_stop(struct ufs_hba *hba);
+void ufshcd_schedule_eh_work(struct ufs_hba *hba);
+
+static inline void check_upiu_size(void)
+{
+	BUILD_BUG_ON(ALIGNED_UPIU_SIZE <
+		GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE);
+}
+
+/**
+ * ufshcd_set_variant - set variant specific data to the hba
+ * @hba: per adapter instance
+ * @variant: pointer to variant specific data
+ */
+static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant)
+{
+	BUG_ON(!hba);
+	hba->priv = variant;
+}
+
+/**
+ * ufshcd_get_variant - get variant specific data from the hba
+ * @hba: per adapter instance
+ */
+static inline void *ufshcd_get_variant(struct ufs_hba *hba)
+{
+	BUG_ON(!hba);
+	return hba->priv;
+}
+
+#ifdef CONFIG_PM
+extern int ufshcd_runtime_suspend(struct device *dev);
+extern int ufshcd_runtime_resume(struct device *dev);
+#endif
+#ifdef CONFIG_PM_SLEEP
+extern int ufshcd_system_suspend(struct device *dev);
+extern int ufshcd_system_resume(struct device *dev);
+#endif
+extern int ufshcd_shutdown(struct ufs_hba *hba);
+extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba,
+				      int agreed_gear,
+				      int adapt_val);
+extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
+			       u8 attr_set, u32 mib_val, u8 peer);
+extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
+			       u32 *mib_val, u8 peer);
+extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
+			struct ufs_pa_layer_attr *desired_pwr_mode);
+
+/* UIC command interfaces for DME primitives */
+#define DME_LOCAL	0
+#define DME_PEER	1
+#define ATTR_SET_NOR	0	/* NORMAL */
+#define ATTR_SET_ST	1	/* STATIC */
+
+static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
+				 u32 mib_val)
+{
+	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+				   mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
+				    u32 mib_val)
+{
+	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
+				   mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
+				      u32 mib_val)
+{
+	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+				   mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
+					 u32 mib_val)
+{
+	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
+				   mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_get(struct ufs_hba *hba,
+				 u32 attr_sel, u32 *mib_val)
+{
+	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
+				      u32 attr_sel, u32 *mib_val)
+{
+	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
+}
+
+static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info)
+{
+	return (pwr_info->pwr_rx == FAST_MODE ||
+		pwr_info->pwr_rx == FASTAUTO_MODE) &&
+		(pwr_info->pwr_tx == FAST_MODE ||
+		pwr_info->pwr_tx == FASTAUTO_MODE);
+}
+
+static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba)
+{
+	return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
+}
+
+/* Expose Query-Request API */
+int ufshcd_query_descriptor_retry(struct ufs_hba *hba,
+				  enum query_opcode opcode,
+				  enum desc_idn idn, u8 index,
+				  u8 selector,
+				  u8 *desc_buf, int *buf_len);
+int ufshcd_read_desc_param(struct ufs_hba *hba,
+			   enum desc_idn desc_id,
+			   int desc_index,
+			   u8 param_offset,
+			   u8 *param_read_buf,
+			   u8 param_size);
+int ufshcd_query_attr_retry(struct ufs_hba *hba, enum query_opcode opcode,
+			    enum attr_idn idn, u8 index, u8 selector,
+			    u32 *attr_val);
+int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
+		      enum attr_idn idn, u8 index, u8 selector, u32 *attr_val);
+int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
+	enum flag_idn idn, u8 index, bool *flag_res);
+
+void ufshcd_auto_hibern8_enable(struct ufs_hba *hba);
+void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
+void ufshcd_fixup_dev_quirks(struct ufs_hba *hba,
+			     const struct ufs_dev_quirk *fixups);
+#define SD_ASCII_STD true
+#define SD_RAW false
+int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index,
+			    u8 **buf, bool ascii);
+
+int ufshcd_hold(struct ufs_hba *hba, bool async);
+void ufshcd_release(struct ufs_hba *hba);
+
+void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value);
+
+void ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
+				  int *desc_length);
+
+u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba);
+
+int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd);
+
+int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
+			     struct utp_upiu_req *req_upiu,
+			     struct utp_upiu_req *rsp_upiu,
+			     int msgcode,
+			     u8 *desc_buff, int *buff_len,
+			     enum query_opcode desc_op);
+
+int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable);
+int ufshcd_suspend_prepare(struct device *dev);
+int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm);
+void ufshcd_resume_complete(struct device *dev);
+
+/* Wrapper functions for safely calling variant operations */
+static inline int ufshcd_vops_init(struct ufs_hba *hba)
+{
+	if (hba->vops && hba->vops->init)
+		return hba->vops->init(hba);
+
+	return 0;
+}
+
+static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba)
+{
+	if (hba->vops && hba->vops->phy_initialization)
+		return hba->vops->phy_initialization(hba);
+
+	return 0;
+}
+
+extern struct ufs_pm_lvl_states ufs_pm_lvl_states[];
+
+int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len,
+		     const char *prefix);
+
+int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask);
+int ufshcd_write_ee_control(struct ufs_hba *hba);
+int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask, u16 *other_mask,
+			     u16 set, u16 clr);
+
+#endif /* End of Header */
diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
new file mode 100644
index 000000000000..f81aa95ffbc4
--- /dev/null
+++ b/include/ufs/ufshci.h
@@ -0,0 +1,510 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Universal Flash Storage Host controller driver
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ *	Santosh Yaraganavi <santosh.sy@samsung.com>
+ *	Vinayak Holikatti <h.vinayak@samsung.com>
+ */
+
+#ifndef _UFSHCI_H
+#define _UFSHCI_H
+
+#include <scsi/scsi_host.h>
+
+enum {
+	TASK_REQ_UPIU_SIZE_DWORDS	= 8,
+	TASK_RSP_UPIU_SIZE_DWORDS	= 8,
+	ALIGNED_UPIU_SIZE		= 512,
+};
+
+/* UFSHCI Registers */
+enum {
+	REG_CONTROLLER_CAPABILITIES		= 0x00,
+	REG_UFS_VERSION				= 0x08,
+	REG_CONTROLLER_DEV_ID			= 0x10,
+	REG_CONTROLLER_PROD_ID			= 0x14,
+	REG_AUTO_HIBERNATE_IDLE_TIMER		= 0x18,
+	REG_INTERRUPT_STATUS			= 0x20,
+	REG_INTERRUPT_ENABLE			= 0x24,
+	REG_CONTROLLER_STATUS			= 0x30,
+	REG_CONTROLLER_ENABLE			= 0x34,
+	REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER	= 0x38,
+	REG_UIC_ERROR_CODE_DATA_LINK_LAYER	= 0x3C,
+	REG_UIC_ERROR_CODE_NETWORK_LAYER	= 0x40,
+	REG_UIC_ERROR_CODE_TRANSPORT_LAYER	= 0x44,
+	REG_UIC_ERROR_CODE_DME			= 0x48,
+	REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL	= 0x4C,
+	REG_UTP_TRANSFER_REQ_LIST_BASE_L	= 0x50,
+	REG_UTP_TRANSFER_REQ_LIST_BASE_H	= 0x54,
+	REG_UTP_TRANSFER_REQ_DOOR_BELL		= 0x58,
+	REG_UTP_TRANSFER_REQ_LIST_CLEAR		= 0x5C,
+	REG_UTP_TRANSFER_REQ_LIST_RUN_STOP	= 0x60,
+	REG_UTP_TASK_REQ_LIST_BASE_L		= 0x70,
+	REG_UTP_TASK_REQ_LIST_BASE_H		= 0x74,
+	REG_UTP_TASK_REQ_DOOR_BELL		= 0x78,
+	REG_UTP_TASK_REQ_LIST_CLEAR		= 0x7C,
+	REG_UTP_TASK_REQ_LIST_RUN_STOP		= 0x80,
+	REG_UIC_COMMAND				= 0x90,
+	REG_UIC_COMMAND_ARG_1			= 0x94,
+	REG_UIC_COMMAND_ARG_2			= 0x98,
+	REG_UIC_COMMAND_ARG_3			= 0x9C,
+
+	UFSHCI_REG_SPACE_SIZE			= 0xA0,
+
+	REG_UFS_CCAP				= 0x100,
+	REG_UFS_CRYPTOCAP			= 0x104,
+
+	UFSHCI_CRYPTO_REG_SPACE_SIZE		= 0x400,
+};
+
+/* Controller capability masks */
+enum {
+	MASK_TRANSFER_REQUESTS_SLOTS		= 0x0000001F,
+	MASK_TASK_MANAGEMENT_REQUEST_SLOTS	= 0x00070000,
+	MASK_AUTO_HIBERN8_SUPPORT		= 0x00800000,
+	MASK_64_ADDRESSING_SUPPORT		= 0x01000000,
+	MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT	= 0x02000000,
+	MASK_UIC_DME_TEST_MODE_SUPPORT		= 0x04000000,
+	MASK_CRYPTO_SUPPORT			= 0x10000000,
+};
+
+#define UFS_MASK(mask, offset)		((mask) << (offset))
+
+/* UFS Version 08h */
+#define MINOR_VERSION_NUM_MASK		UFS_MASK(0xFFFF, 0)
+#define MAJOR_VERSION_NUM_MASK		UFS_MASK(0xFFFF, 16)
+
+/*
+ * Controller UFSHCI version
+ * - 2.x and newer use the following scheme:
+ *   major << 8 + minor << 4
+ * - 1.x has been converted to match this in
+ *   ufshcd_get_ufs_version()
+ */
+static inline u32 ufshci_version(u32 major, u32 minor)
+{
+	return (major << 8) + (minor << 4);
+}
+
+/*
+ * HCDDID - Host Controller Identification Descriptor
+ *	  - Device ID and Device Class 10h
+ */
+#define DEVICE_CLASS	UFS_MASK(0xFFFF, 0)
+#define DEVICE_ID	UFS_MASK(0xFF, 24)
+
+/*
+ * HCPMID - Host Controller Identification Descriptor
+ *	  - Product/Manufacturer ID  14h
+ */
+#define MANUFACTURE_ID_MASK	UFS_MASK(0xFFFF, 0)
+#define PRODUCT_ID_MASK		UFS_MASK(0xFFFF, 16)
+
+/* AHIT - Auto-Hibernate Idle Timer */
+#define UFSHCI_AHIBERN8_TIMER_MASK		GENMASK(9, 0)
+#define UFSHCI_AHIBERN8_SCALE_MASK		GENMASK(12, 10)
+#define UFSHCI_AHIBERN8_SCALE_FACTOR		10
+#define UFSHCI_AHIBERN8_MAX			(1023 * 100000)
+
+/*
+ * IS - Interrupt Status - 20h
+ */
+#define UTP_TRANSFER_REQ_COMPL			0x1
+#define UIC_DME_END_PT_RESET			0x2
+#define UIC_ERROR				0x4
+#define UIC_TEST_MODE				0x8
+#define UIC_POWER_MODE				0x10
+#define UIC_HIBERNATE_EXIT			0x20
+#define UIC_HIBERNATE_ENTER			0x40
+#define UIC_LINK_LOST				0x80
+#define UIC_LINK_STARTUP			0x100
+#define UTP_TASK_REQ_COMPL			0x200
+#define UIC_COMMAND_COMPL			0x400
+#define DEVICE_FATAL_ERROR			0x800
+#define CONTROLLER_FATAL_ERROR			0x10000
+#define SYSTEM_BUS_FATAL_ERROR			0x20000
+#define CRYPTO_ENGINE_FATAL_ERROR		0x40000
+
+#define UFSHCD_UIC_HIBERN8_MASK	(UIC_HIBERNATE_ENTER |\
+				UIC_HIBERNATE_EXIT)
+
+#define UFSHCD_UIC_PWR_MASK	(UFSHCD_UIC_HIBERN8_MASK |\
+				UIC_POWER_MODE)
+
+#define UFSHCD_UIC_MASK		(UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK)
+
+#define UFSHCD_ERROR_MASK	(UIC_ERROR |\
+				DEVICE_FATAL_ERROR |\
+				CONTROLLER_FATAL_ERROR |\
+				SYSTEM_BUS_FATAL_ERROR |\
+				CRYPTO_ENGINE_FATAL_ERROR)
+
+#define INT_FATAL_ERRORS	(DEVICE_FATAL_ERROR |\
+				CONTROLLER_FATAL_ERROR |\
+				SYSTEM_BUS_FATAL_ERROR |\
+				CRYPTO_ENGINE_FATAL_ERROR |\
+				UIC_LINK_LOST)
+
+/* HCS - Host Controller Status 30h */
+#define DEVICE_PRESENT				0x1
+#define UTP_TRANSFER_REQ_LIST_READY		0x2
+#define UTP_TASK_REQ_LIST_READY			0x4
+#define UIC_COMMAND_READY			0x8
+#define HOST_ERROR_INDICATOR			0x10
+#define DEVICE_ERROR_INDICATOR			0x20
+#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK	UFS_MASK(0x7, 8)
+
+#define UFSHCD_STATUS_READY	(UTP_TRANSFER_REQ_LIST_READY |\
+				UTP_TASK_REQ_LIST_READY |\
+				UIC_COMMAND_READY)
+
+enum {
+	PWR_OK		= 0x0,
+	PWR_LOCAL	= 0x01,
+	PWR_REMOTE	= 0x02,
+	PWR_BUSY	= 0x03,
+	PWR_ERROR_CAP	= 0x04,
+	PWR_FATAL_ERROR	= 0x05,
+};
+
+/* HCE - Host Controller Enable 34h */
+#define CONTROLLER_ENABLE	0x1
+#define CONTROLLER_DISABLE	0x0
+#define CRYPTO_GENERAL_ENABLE	0x2
+
+/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
+#define UIC_PHY_ADAPTER_LAYER_ERROR			0x80000000
+#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK		0x1F
+#define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK		0xF
+#define UIC_PHY_ADAPTER_LAYER_GENERIC_ERROR		0x10
+
+/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
+#define UIC_DATA_LINK_LAYER_ERROR		0x80000000
+#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK	0xFFFF
+#define UIC_DATA_LINK_LAYER_ERROR_TCX_REP_TIMER_EXP	0x2
+#define UIC_DATA_LINK_LAYER_ERROR_AFCX_REQ_TIMER_EXP	0x4
+#define UIC_DATA_LINK_LAYER_ERROR_FCX_PRO_TIMER_EXP	0x8
+#define UIC_DATA_LINK_LAYER_ERROR_RX_BUF_OF	0x20
+#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT	0x2000
+#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED	0x0001
+#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
+
+/* UECN - Host UIC Error Code Network Layer 40h */
+#define UIC_NETWORK_LAYER_ERROR			0x80000000
+#define UIC_NETWORK_LAYER_ERROR_CODE_MASK	0x7
+#define UIC_NETWORK_UNSUPPORTED_HEADER_TYPE	0x1
+#define UIC_NETWORK_BAD_DEVICEID_ENC		0x2
+#define UIC_NETWORK_LHDR_TRAP_PACKET_DROPPING	0x4
+
+/* UECT - Host UIC Error Code Transport Layer 44h */
+#define UIC_TRANSPORT_LAYER_ERROR		0x80000000
+#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK	0x7F
+#define UIC_TRANSPORT_UNSUPPORTED_HEADER_TYPE	0x1
+#define UIC_TRANSPORT_UNKNOWN_CPORTID		0x2
+#define UIC_TRANSPORT_NO_CONNECTION_RX		0x4
+#define UIC_TRANSPORT_CONTROLLED_SEGMENT_DROPPING	0x8
+#define UIC_TRANSPORT_BAD_TC			0x10
+#define UIC_TRANSPORT_E2E_CREDIT_OVERFOW	0x20
+#define UIC_TRANSPORT_SAFETY_VALUE_DROPPING	0x40
+
+/* UECDME - Host UIC Error Code DME 48h */
+#define UIC_DME_ERROR			0x80000000
+#define UIC_DME_ERROR_CODE_MASK		0x1
+
+/* UTRIACR - Interrupt Aggregation control register - 0x4Ch */
+#define INT_AGGR_TIMEOUT_VAL_MASK		0xFF
+#define INT_AGGR_COUNTER_THRESHOLD_MASK		UFS_MASK(0x1F, 8)
+#define INT_AGGR_COUNTER_AND_TIMER_RESET	0x10000
+#define INT_AGGR_STATUS_BIT			0x100000
+#define INT_AGGR_PARAM_WRITE			0x1000000
+#define INT_AGGR_ENABLE				0x80000000
+
+/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
+#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT	0x1
+
+/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
+#define UTP_TASK_REQ_LIST_RUN_STOP_BIT		0x1
+
+/* UICCMD - UIC Command */
+#define COMMAND_OPCODE_MASK		0xFF
+#define GEN_SELECTOR_INDEX_MASK		0xFFFF
+
+#define MIB_ATTRIBUTE_MASK		UFS_MASK(0xFFFF, 16)
+#define RESET_LEVEL			0xFF
+
+#define ATTR_SET_TYPE_MASK		UFS_MASK(0xFF, 16)
+#define CONFIG_RESULT_CODE_MASK		0xFF
+#define GENERIC_ERROR_CODE_MASK		0xFF
+
+/* GenSelectorIndex calculation macros for M-PHY attributes */
+#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
+#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane))
+
+#define UIC_ARG_MIB_SEL(attr, sel)	((((attr) & 0xFFFF) << 16) |\
+					 ((sel) & 0xFFFF))
+#define UIC_ARG_MIB(attr)		UIC_ARG_MIB_SEL(attr, 0)
+#define UIC_ARG_ATTR_TYPE(t)		(((t) & 0xFF) << 16)
+#define UIC_GET_ATTR_ID(v)		(((v) >> 16) & 0xFFFF)
+
+/* Link Status*/
+enum link_status {
+	UFSHCD_LINK_IS_DOWN	= 1,
+	UFSHCD_LINK_IS_UP	= 2,
+};
+
+/* UIC Commands */
+enum uic_cmd_dme {
+	UIC_CMD_DME_GET			= 0x01,
+	UIC_CMD_DME_SET			= 0x02,
+	UIC_CMD_DME_PEER_GET		= 0x03,
+	UIC_CMD_DME_PEER_SET		= 0x04,
+	UIC_CMD_DME_POWERON		= 0x10,
+	UIC_CMD_DME_POWEROFF		= 0x11,
+	UIC_CMD_DME_ENABLE		= 0x12,
+	UIC_CMD_DME_RESET		= 0x14,
+	UIC_CMD_DME_END_PT_RST		= 0x15,
+	UIC_CMD_DME_LINK_STARTUP	= 0x16,
+	UIC_CMD_DME_HIBER_ENTER		= 0x17,
+	UIC_CMD_DME_HIBER_EXIT		= 0x18,
+	UIC_CMD_DME_TEST_MODE		= 0x1A,
+};
+
+/* UIC Config result code / Generic error code */
+enum {
+	UIC_CMD_RESULT_SUCCESS			= 0x00,
+	UIC_CMD_RESULT_INVALID_ATTR		= 0x01,
+	UIC_CMD_RESULT_FAILURE			= 0x01,
+	UIC_CMD_RESULT_INVALID_ATTR_VALUE	= 0x02,
+	UIC_CMD_RESULT_READ_ONLY_ATTR		= 0x03,
+	UIC_CMD_RESULT_WRITE_ONLY_ATTR		= 0x04,
+	UIC_CMD_RESULT_BAD_INDEX		= 0x05,
+	UIC_CMD_RESULT_LOCKED_ATTR		= 0x06,
+	UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX	= 0x07,
+	UIC_CMD_RESULT_PEER_COMM_FAILURE	= 0x08,
+	UIC_CMD_RESULT_BUSY			= 0x09,
+	UIC_CMD_RESULT_DME_FAILURE		= 0x0A,
+};
+
+#define MASK_UIC_COMMAND_RESULT			0xFF
+
+#define INT_AGGR_COUNTER_THLD_VAL(c)	(((c) & 0x1F) << 8)
+#define INT_AGGR_TIMEOUT_VAL(t)		(((t) & 0xFF) << 0)
+
+/* Interrupt disable masks */
+enum {
+	/* Interrupt disable mask for UFSHCI v1.0 */
+	INTERRUPT_MASK_ALL_VER_10	= 0x30FFF,
+	INTERRUPT_MASK_RW_VER_10	= 0x30000,
+
+	/* Interrupt disable mask for UFSHCI v1.1 */
+	INTERRUPT_MASK_ALL_VER_11	= 0x31FFF,
+
+	/* Interrupt disable mask for UFSHCI v2.1 */
+	INTERRUPT_MASK_ALL_VER_21	= 0x71FFF,
+};
+
+/* CCAP - Crypto Capability 100h */
+union ufs_crypto_capabilities {
+	__le32 reg_val;
+	struct {
+		u8 num_crypto_cap;
+		u8 config_count;
+		u8 reserved;
+		u8 config_array_ptr;
+	};
+};
+
+enum ufs_crypto_key_size {
+	UFS_CRYPTO_KEY_SIZE_INVALID	= 0x0,
+	UFS_CRYPTO_KEY_SIZE_128		= 0x1,
+	UFS_CRYPTO_KEY_SIZE_192		= 0x2,
+	UFS_CRYPTO_KEY_SIZE_256		= 0x3,
+	UFS_CRYPTO_KEY_SIZE_512		= 0x4,
+};
+
+enum ufs_crypto_alg {
+	UFS_CRYPTO_ALG_AES_XTS			= 0x0,
+	UFS_CRYPTO_ALG_BITLOCKER_AES_CBC	= 0x1,
+	UFS_CRYPTO_ALG_AES_ECB			= 0x2,
+	UFS_CRYPTO_ALG_ESSIV_AES_CBC		= 0x3,
+};
+
+/* x-CRYPTOCAP - Crypto Capability X */
+union ufs_crypto_cap_entry {
+	__le32 reg_val;
+	struct {
+		u8 algorithm_id;
+		u8 sdus_mask; /* Supported data unit size mask */
+		u8 key_size;
+		u8 reserved;
+	};
+};
+
+#define UFS_CRYPTO_CONFIGURATION_ENABLE (1 << 7)
+#define UFS_CRYPTO_KEY_MAX_SIZE 64
+/* x-CRYPTOCFG - Crypto Configuration X */
+union ufs_crypto_cfg_entry {
+	__le32 reg_val[32];
+	struct {
+		u8 crypto_key[UFS_CRYPTO_KEY_MAX_SIZE];
+		u8 data_unit_size;
+		u8 crypto_cap_idx;
+		u8 reserved_1;
+		u8 config_enable;
+		u8 reserved_multi_host;
+		u8 reserved_2;
+		u8 vsb[2];
+		u8 reserved_3[56];
+	};
+};
+
+/*
+ * Request Descriptor Definitions
+ */
+
+/* Transfer request command type */
+enum {
+	UTP_CMD_TYPE_SCSI		= 0x0,
+	UTP_CMD_TYPE_UFS		= 0x1,
+	UTP_CMD_TYPE_DEV_MANAGE		= 0x2,
+};
+
+/* To accommodate UFS2.0 required Command type */
+enum {
+	UTP_CMD_TYPE_UFS_STORAGE	= 0x1,
+};
+
+enum {
+	UTP_SCSI_COMMAND		= 0x00000000,
+	UTP_NATIVE_UFS_COMMAND		= 0x10000000,
+	UTP_DEVICE_MANAGEMENT_FUNCTION	= 0x20000000,
+	UTP_REQ_DESC_INT_CMD		= 0x01000000,
+	UTP_REQ_DESC_CRYPTO_ENABLE_CMD	= 0x00800000,
+};
+
+/* UTP Transfer Request Data Direction (DD) */
+enum {
+	UTP_NO_DATA_TRANSFER	= 0x00000000,
+	UTP_HOST_TO_DEVICE	= 0x02000000,
+	UTP_DEVICE_TO_HOST	= 0x04000000,
+};
+
+/* Overall command status values */
+enum utp_ocs {
+	OCS_SUCCESS			= 0x0,
+	OCS_INVALID_CMD_TABLE_ATTR	= 0x1,
+	OCS_INVALID_PRDT_ATTR		= 0x2,
+	OCS_MISMATCH_DATA_BUF_SIZE	= 0x3,
+	OCS_MISMATCH_RESP_UPIU_SIZE	= 0x4,
+	OCS_PEER_COMM_FAILURE		= 0x5,
+	OCS_ABORTED			= 0x6,
+	OCS_FATAL_ERROR			= 0x7,
+	OCS_DEVICE_FATAL_ERROR		= 0x8,
+	OCS_INVALID_CRYPTO_CONFIG	= 0x9,
+	OCS_GENERAL_CRYPTO_ERROR	= 0xA,
+	OCS_INVALID_COMMAND_STATUS	= 0x0F,
+};
+
+enum {
+	MASK_OCS			= 0x0F,
+};
+
+/* The maximum length of the data byte count field in the PRDT is 256KB */
+#define PRDT_DATA_BYTE_COUNT_MAX	(256 * 1024)
+/* The granularity of the data byte count field in the PRDT is 32-bit */
+#define PRDT_DATA_BYTE_COUNT_PAD	4
+
+/**
+ * struct ufshcd_sg_entry - UFSHCI PRD Entry
+ * @addr: Physical address; DW-0 and DW-1.
+ * @reserved: Reserved for future use DW-2
+ * @size: size of physical segment DW-3
+ */
+struct ufshcd_sg_entry {
+	__le64    addr;
+	__le32    reserved;
+	__le32    size;
+};
+
+/**
+ * struct utp_transfer_cmd_desc - UTP Command Descriptor (UCD)
+ * @command_upiu: Command UPIU Frame address
+ * @response_upiu: Response UPIU Frame address
+ * @prd_table: Physical Region Descriptor
+ */
+struct utp_transfer_cmd_desc {
+	u8 command_upiu[ALIGNED_UPIU_SIZE];
+	u8 response_upiu[ALIGNED_UPIU_SIZE];
+	struct ufshcd_sg_entry    prd_table[SG_ALL];
+};
+
+/**
+ * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
+ * @dword0: Descriptor Header DW0
+ * @dword1: Descriptor Header DW1
+ * @dword2: Descriptor Header DW2
+ * @dword3: Descriptor Header DW3
+ */
+struct request_desc_header {
+	__le32 dword_0;
+	__le32 dword_1;
+	__le32 dword_2;
+	__le32 dword_3;
+};
+
+/**
+ * struct utp_transfer_req_desc - UTP Transfer Request Descriptor (UTRD)
+ * @header: UTRD header DW-0 to DW-3
+ * @command_desc_base_addr_lo: UCD base address low DW-4
+ * @command_desc_base_addr_hi: UCD base address high DW-5
+ * @response_upiu_length: response UPIU length DW-6
+ * @response_upiu_offset: response UPIU offset DW-6
+ * @prd_table_length: Physical region descriptor length DW-7
+ * @prd_table_offset: Physical region descriptor offset DW-7
+ */
+struct utp_transfer_req_desc {
+
+	/* DW 0-3 */
+	struct request_desc_header header;
+
+	/* DW 4-5*/
+	__le32  command_desc_base_addr_lo;
+	__le32  command_desc_base_addr_hi;
+
+	/* DW 6 */
+	__le16  response_upiu_length;
+	__le16  response_upiu_offset;
+
+	/* DW 7 */
+	__le16  prd_table_length;
+	__le16  prd_table_offset;
+};
+
+/*
+ * UTMRD structure.
+ */
+struct utp_task_req_desc {
+	/* DW 0-3 */
+	struct request_desc_header header;
+
+	/* DW 4-11 - Task request UPIU structure */
+	struct {
+		struct utp_upiu_header	req_header;
+		__be32			input_param1;
+		__be32			input_param2;
+		__be32			input_param3;
+		__be32			__reserved1[2];
+	} upiu_req;
+
+	/* DW 12-19 - Task Management Response UPIU structure */
+	struct {
+		struct utp_upiu_header	rsp_header;
+		__be32			output_param1;
+		__be32			output_param2;
+		__be32			__reserved2[3];
+	} upiu_rsp;
+};
+
+#endif /* End of Header */
diff --git a/include/ufs/unipro.h b/include/ufs/unipro.h
new file mode 100644
index 000000000000..0521f887e3ac
--- /dev/null
+++ b/include/ufs/unipro.h
@@ -0,0 +1,316 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ */
+
+#ifndef _UNIPRO_H_
+#define _UNIPRO_H_
+
+/*
+ * M-TX Configuration Attributes
+ */
+#define TX_HIBERN8TIME_CAPABILITY		0x000F
+#define TX_MODE					0x0021
+#define TX_HSRATE_SERIES			0x0022
+#define TX_HSGEAR				0x0023
+#define TX_PWMGEAR				0x0024
+#define TX_AMPLITUDE				0x0025
+#define TX_HS_SLEWRATE				0x0026
+#define TX_SYNC_SOURCE				0x0027
+#define TX_HS_SYNC_LENGTH			0x0028
+#define TX_HS_PREPARE_LENGTH			0x0029
+#define TX_LS_PREPARE_LENGTH			0x002A
+#define TX_HIBERN8_CONTROL			0x002B
+#define TX_LCC_ENABLE				0x002C
+#define TX_PWM_BURST_CLOSURE_EXTENSION		0x002D
+#define TX_BYPASS_8B10B_ENABLE			0x002E
+#define TX_DRIVER_POLARITY			0x002F
+#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE	0x0030
+#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE	0x0031
+#define TX_LCC_SEQUENCER			0x0032
+#define TX_MIN_ACTIVATETIME			0x0033
+#define TX_PWM_G6_G7_SYNC_LENGTH		0x0034
+#define TX_REFCLKFREQ				0x00EB
+#define TX_CFGCLKFREQVAL			0x00EC
+#define	CFGEXTRATTR				0x00F0
+#define DITHERCTRL2				0x00F1
+
+/*
+ * M-RX Configuration Attributes
+ */
+#define RX_MODE					0x00A1
+#define RX_HSRATE_SERIES			0x00A2
+#define RX_HSGEAR				0x00A3
+#define RX_PWMGEAR				0x00A4
+#define RX_LS_TERMINATED_ENABLE			0x00A5
+#define RX_HS_UNTERMINATED_ENABLE		0x00A6
+#define RX_ENTER_HIBERN8			0x00A7
+#define RX_BYPASS_8B10B_ENABLE			0x00A8
+#define RX_TERMINATION_FORCE_ENABLE		0x00A9
+#define RX_MIN_ACTIVATETIME_CAPABILITY		0x008F
+#define RX_HIBERN8TIME_CAPABILITY		0x0092
+#define RX_REFCLKFREQ				0x00EB
+#define	RX_CFGCLKFREQVAL			0x00EC
+#define CFGWIDEINLN				0x00F0
+#define CFGRXCDR8				0x00BA
+#define ENARXDIRECTCFG4				0x00F2
+#define CFGRXOVR8				0x00BD
+#define RXDIRECTCTRL2				0x00C7
+#define ENARXDIRECTCFG3				0x00F3
+#define RXCALCTRL				0x00B4
+#define ENARXDIRECTCFG2				0x00F4
+#define CFGRXOVR4				0x00E9
+#define RXSQCTRL				0x00B5
+#define CFGRXOVR6				0x00BF
+#define RX_HS_G1_SYNC_LENGTH_CAP		0x008B
+#define RX_HS_G1_PREP_LENGTH_CAP		0x008C
+#define RX_HS_G2_SYNC_LENGTH_CAP		0x0094
+#define RX_HS_G3_SYNC_LENGTH_CAP		0x0095
+#define RX_HS_G2_PREP_LENGTH_CAP		0x0096
+#define RX_HS_G3_PREP_LENGTH_CAP		0x0097
+#define RX_ADV_GRANULARITY_CAP			0x0098
+#define RX_MIN_ACTIVATETIME_CAP			0x008F
+#define RX_HIBERN8TIME_CAP			0x0092
+#define RX_ADV_HIBERN8TIME_CAP			0x0099
+#define RX_ADV_MIN_ACTIVATETIME_CAP		0x009A
+
+
+#define is_mphy_tx_attr(attr)			(attr < RX_MODE)
+#define RX_ADV_FINE_GRAN_STEP(x)		((((x) & 0x3) << 1) | 0x1)
+#define SYNC_LEN_FINE(x)			((x) & 0x3F)
+#define SYNC_LEN_COARSE(x)			((1 << 6) | ((x) & 0x3F))
+#define PREP_LEN(x)				((x) & 0xF)
+
+#define RX_MIN_ACTIVATETIME_UNIT_US		100
+#define HIBERN8TIME_UNIT_US			100
+
+/*
+ * Common Block Attributes
+ */
+#define TX_GLOBALHIBERNATE			UNIPRO_CB_OFFSET(0x002B)
+#define REFCLKMODE				UNIPRO_CB_OFFSET(0x00BF)
+#define DIRECTCTRL19				UNIPRO_CB_OFFSET(0x00CD)
+#define DIRECTCTRL10				UNIPRO_CB_OFFSET(0x00E6)
+#define CDIRECTCTRL6				UNIPRO_CB_OFFSET(0x00EA)
+#define RTOBSERVESELECT				UNIPRO_CB_OFFSET(0x00F0)
+#define CBDIVFACTOR				UNIPRO_CB_OFFSET(0x00F1)
+#define CBDCOCTRL5				UNIPRO_CB_OFFSET(0x00F3)
+#define CBPRGPLL2				UNIPRO_CB_OFFSET(0x00F8)
+#define CBPRGTUNING				UNIPRO_CB_OFFSET(0x00FB)
+
+#define UNIPRO_CB_OFFSET(x)			(0x8000 | x)
+
+/*
+ * PHY Adapter attributes
+ */
+#define PA_ACTIVETXDATALANES	0x1560
+#define PA_ACTIVERXDATALANES	0x1580
+#define PA_TXTRAILINGCLOCKS	0x1564
+#define PA_PHY_TYPE		0x1500
+#define PA_AVAILTXDATALANES	0x1520
+#define PA_AVAILRXDATALANES	0x1540
+#define PA_MINRXTRAILINGCLOCKS	0x1543
+#define PA_TXPWRSTATUS		0x1567
+#define PA_RXPWRSTATUS		0x1582
+#define PA_TXFORCECLOCK		0x1562
+#define PA_TXPWRMODE		0x1563
+#define PA_LEGACYDPHYESCDL	0x1570
+#define PA_MAXTXSPEEDFAST	0x1521
+#define PA_MAXTXSPEEDSLOW	0x1522
+#define PA_MAXRXSPEEDFAST	0x1541
+#define PA_MAXRXSPEEDSLOW	0x1542
+#define PA_TXLINKSTARTUPHS	0x1544
+#define PA_LOCAL_TX_LCC_ENABLE	0x155E
+#define PA_TXSPEEDFAST		0x1565
+#define PA_TXSPEEDSLOW		0x1566
+#define PA_REMOTEVERINFO	0x15A0
+#define PA_TXGEAR		0x1568
+#define PA_TXTERMINATION	0x1569
+#define PA_HSSERIES		0x156A
+#define PA_PWRMODE		0x1571
+#define PA_RXGEAR		0x1583
+#define PA_RXTERMINATION	0x1584
+#define PA_MAXRXPWMGEAR		0x1586
+#define PA_MAXRXHSGEAR		0x1587
+#define PA_RXHSUNTERMCAP	0x15A5
+#define PA_RXLSTERMCAP		0x15A6
+#define PA_GRANULARITY		0x15AA
+#define PA_PACPREQTIMEOUT	0x1590
+#define PA_PACPREQEOBTIMEOUT	0x1591
+#define PA_HIBERN8TIME		0x15A7
+#define PA_LOCALVERINFO		0x15A9
+#define PA_GRANULARITY		0x15AA
+#define PA_TACTIVATE		0x15A8
+#define PA_PACPFRAMECOUNT	0x15C0
+#define PA_PACPERRORCOUNT	0x15C1
+#define PA_PHYTESTCONTROL	0x15C2
+#define PA_PWRMODEUSERDATA0	0x15B0
+#define PA_PWRMODEUSERDATA1	0x15B1
+#define PA_PWRMODEUSERDATA2	0x15B2
+#define PA_PWRMODEUSERDATA3	0x15B3
+#define PA_PWRMODEUSERDATA4	0x15B4
+#define PA_PWRMODEUSERDATA5	0x15B5
+#define PA_PWRMODEUSERDATA6	0x15B6
+#define PA_PWRMODEUSERDATA7	0x15B7
+#define PA_PWRMODEUSERDATA8	0x15B8
+#define PA_PWRMODEUSERDATA9	0x15B9
+#define PA_PWRMODEUSERDATA10	0x15BA
+#define PA_PWRMODEUSERDATA11	0x15BB
+#define PA_CONNECTEDTXDATALANES	0x1561
+#define PA_CONNECTEDRXDATALANES	0x1581
+#define PA_LOGICALLANEMAP	0x15A1
+#define PA_SLEEPNOCONFIGTIME	0x15A2
+#define PA_STALLNOCONFIGTIME	0x15A3
+#define PA_SAVECONFIGTIME	0x15A4
+#define PA_TXHSADAPTTYPE       0x15D4
+
+/* Adpat type for PA_TXHSADAPTTYPE attribute */
+#define PA_REFRESH_ADAPT       0x00
+#define PA_INITIAL_ADAPT       0x01
+#define PA_NO_ADAPT            0x03
+
+#define PA_TACTIVATE_TIME_UNIT_US	10
+#define PA_HIBERN8_TIME_UNIT_US		100
+
+/*Other attributes*/
+#define VS_MPHYCFGUPDT		0xD085
+#define VS_DEBUGOMC		0xD09E
+#define VS_POWERSTATE		0xD083
+
+#define PA_GRANULARITY_MIN_VAL	1
+#define PA_GRANULARITY_MAX_VAL	6
+
+/* PHY Adapter Protocol Constants */
+#define PA_MAXDATALANES	4
+
+#define DL_FC0ProtectionTimeOutVal_Default	8191
+#define DL_TC0ReplayTimeOutVal_Default		65535
+#define DL_AFC0ReqTimeOutVal_Default		32767
+#define DL_FC1ProtectionTimeOutVal_Default	8191
+#define DL_TC1ReplayTimeOutVal_Default		65535
+#define DL_AFC1ReqTimeOutVal_Default		32767
+
+#define DME_LocalFC0ProtectionTimeOutVal	0xD041
+#define DME_LocalTC0ReplayTimeOutVal		0xD042
+#define DME_LocalAFC0ReqTimeOutVal		0xD043
+
+/* PA power modes */
+enum {
+	FAST_MODE	= 1,
+	SLOW_MODE	= 2,
+	FASTAUTO_MODE	= 4,
+	SLOWAUTO_MODE	= 5,
+	UNCHANGED	= 7,
+};
+
+#define PWRMODE_MASK		0xF
+#define PWRMODE_RX_OFFSET	4
+
+/* PA TX/RX Frequency Series */
+enum {
+	PA_HS_MODE_A	= 1,
+	PA_HS_MODE_B	= 2,
+};
+
+enum ufs_pwm_gear_tag {
+	UFS_PWM_DONT_CHANGE,	/* Don't change Gear */
+	UFS_PWM_G1,		/* PWM Gear 1 (default for reset) */
+	UFS_PWM_G2,		/* PWM Gear 2 */
+	UFS_PWM_G3,		/* PWM Gear 3 */
+	UFS_PWM_G4,		/* PWM Gear 4 */
+	UFS_PWM_G5,		/* PWM Gear 5 */
+	UFS_PWM_G6,		/* PWM Gear 6 */
+	UFS_PWM_G7,		/* PWM Gear 7 */
+};
+
+enum ufs_hs_gear_tag {
+	UFS_HS_DONT_CHANGE,	/* Don't change Gear */
+	UFS_HS_G1,		/* HS Gear 1 (default for reset) */
+	UFS_HS_G2,		/* HS Gear 2 */
+	UFS_HS_G3,		/* HS Gear 3 */
+	UFS_HS_G4,		/* HS Gear 4 */
+};
+
+enum ufs_unipro_ver {
+	UFS_UNIPRO_VER_RESERVED = 0,
+	UFS_UNIPRO_VER_1_40 = 1, /* UniPro version 1.40 */
+	UFS_UNIPRO_VER_1_41 = 2, /* UniPro version 1.41 */
+	UFS_UNIPRO_VER_1_6  = 3, /* UniPro version 1.6 */
+	UFS_UNIPRO_VER_1_61 = 4, /* UniPro version 1.61 */
+	UFS_UNIPRO_VER_1_8  = 5, /* UniPro version 1.8 */
+	UFS_UNIPRO_VER_MAX  = 6, /* UniPro unsupported version */
+	/* UniPro version field mask in PA_LOCALVERINFO */
+	UFS_UNIPRO_VER_MASK = 0xF,
+};
+
+/*
+ * Data Link Layer Attributes
+ */
+#define DL_TC0TXFCTHRESHOLD	0x2040
+#define DL_FC0PROTTIMEOUTVAL	0x2041
+#define DL_TC0REPLAYTIMEOUTVAL	0x2042
+#define DL_AFC0REQTIMEOUTVAL	0x2043
+#define DL_AFC0CREDITTHRESHOLD	0x2044
+#define DL_TC0OUTACKTHRESHOLD	0x2045
+#define DL_TC1TXFCTHRESHOLD	0x2060
+#define DL_FC1PROTTIMEOUTVAL	0x2061
+#define DL_TC1REPLAYTIMEOUTVAL	0x2062
+#define DL_AFC1REQTIMEOUTVAL	0x2063
+#define DL_AFC1CREDITTHRESHOLD	0x2064
+#define DL_TC1OUTACKTHRESHOLD	0x2065
+#define DL_TXPREEMPTIONCAP	0x2000
+#define DL_TC0TXMAXSDUSIZE	0x2001
+#define DL_TC0RXINITCREDITVAL	0x2002
+#define DL_TC0TXBUFFERSIZE	0x2005
+#define DL_PEERTC0PRESENT	0x2046
+#define DL_PEERTC0RXINITCREVAL	0x2047
+#define DL_TC1TXMAXSDUSIZE	0x2003
+#define DL_TC1RXINITCREDITVAL	0x2004
+#define DL_TC1TXBUFFERSIZE	0x2006
+#define DL_PEERTC1PRESENT	0x2066
+#define DL_PEERTC1RXINITCREVAL	0x2067
+
+/*
+ * Network Layer Attributes
+ */
+#define N_DEVICEID		0x3000
+#define N_DEVICEID_VALID	0x3001
+#define N_TC0TXMAXSDUSIZE	0x3020
+#define N_TC1TXMAXSDUSIZE	0x3021
+
+/*
+ * Transport Layer Attributes
+ */
+#define T_NUMCPORTS		0x4000
+#define T_NUMTESTFEATURES	0x4001
+#define T_CONNECTIONSTATE	0x4020
+#define T_PEERDEVICEID		0x4021
+#define T_PEERCPORTID		0x4022
+#define T_TRAFFICCLASS		0x4023
+#define T_PROTOCOLID		0x4024
+#define T_CPORTFLAGS		0x4025
+#define T_TXTOKENVALUE		0x4026
+#define T_RXTOKENVALUE		0x4027
+#define T_LOCALBUFFERSPACE	0x4028
+#define T_PEERBUFFERSPACE	0x4029
+#define T_CREDITSTOSEND		0x402A
+#define T_CPORTMODE		0x402B
+#define T_TC0TXMAXSDUSIZE	0x4060
+#define T_TC1TXMAXSDUSIZE	0x4061
+
+/* CPort setting */
+#define E2EFC_ON	(1 << 0)
+#define E2EFC_OFF	(0 << 0)
+#define CSD_N_ON	(0 << 1)
+#define CSD_N_OFF	(1 << 1)
+#define CSV_N_ON	(0 << 2)
+#define CSV_N_OFF	(1 << 2)
+#define CPORT_DEF_FLAGS	(CSV_N_OFF | CSD_N_OFF | E2EFC_OFF)
+
+/* CPort connection state */
+enum {
+	CPORT_IDLE = 0,
+	CPORT_CONNECTED,
+};
+
+#endif /* _UNIPRO_H_ */