Merge tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Driver for OneXPlayer mini AMD sensors

   - Ampere's Altra smpro-hwmon driver

  New chip and attribute support in existing drivers:

   - nct6775: Support for ASUS CROSSHAIR VIII/TUF/ProArt B550M

   - pmbus/ltc2978: Support for LTC7132

   - aquacomputer_d5next: Support for temperature sensor offsets and
     flow sensor pulses

   - coretemp: Support for dynamic ttarget and tjmax

  Improvements:

   - Use devm_regulator_get_enable() where appropriate

   - Use sysfs_emit() instead of scnprintf()

   - Remove some useless #include <linux/hwmon-vid.h>

   - Include <linux/kstrtox.h> when appropriate

   - Use simple i2c probe

   - it87: Check for a valid chip before using force_id, and new new
     module parameter to ignore ACPI resource conflicts

   - jc42: Use regmap, and restore min/max/critical temperatures on
     resume

   - Add reporting power good and status to PMBus based regulators

  Last minute fixes:

   - emc2305: Fix probing of emc2301/2/3, and fix setting pwm values
     manually if THERMAL is enabled

  And various other minor fixes and improvements"

* tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits)
  hwmon: (emc2305) fix pwm never being able to set lower
  hwmon: (emc2305) fix unable to probe emc2301/2/3
  hwmon: (dell-smm) Move error message to make probing silent
  hwmon: use sysfs_emit() to instead of scnprintf()
  hwmon: (oxp-sensors) Fix pwm reading
  hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulses
  hwmon: (pmbus/core) Implement regulator get_status
  hwmon: (oxp-sensors) Add AOK ZOE and Mini PRO
  hwmon: (gsc-hwmon) Switch to flexible array to simplify code
  hwmon: (pmbus) Add power good support
  hwmon: (nct6775) add ASUS CROSSHAIR VIII/TUF/ProArt B550M
  hwmon: (coretemp) Add support for dynamic ttarget
  hwmon: (coretemp) Add support for dynamic tjmax
  hwmon: (coretemp) rearrange tjmax handing code
  hwmon: Remove some useless #include <linux/hwmon-vid.h>
  hwmon: (coretemp) Remove obsolete temp_data->valid
  hwmon: add OneXPlayer mini AMD sensors driver
  hwmon: (aquacomputer_d5next) Clear up macros and comments
  hwmon: (it87) Add DMI table for future extensions
  hwmon: Include <linux/kstrtox.h> when appropriate
  ...

2 files changed, 3 insertions, 3 deletions

diff --git a/include/linux/hwmon-sysfs.h b/include/linux/hwmon-sysfs.h
index cb26d02f52f3..d896713359cd 100644
--- a/include/linux/hwmon-sysfs.h
+++ b/include/linux/hwmon-sysfs.h
@@ -8,6 +8,7 @@
 #define _LINUX_HWMON_SYSFS_H
 
 #include <linux/device.h>
+#include <linux/kstrtox.h>
 
 struct sensor_device_attribute{
 	struct device_attribute dev_attr;
diff --git a/include/linux/platform_data/gsc_hwmon.h b/include/linux/platform_data/gsc_hwmon.h
index 281f499eda97..f2781aa7eff8 100644
--- a/include/linux/platform_data/gsc_hwmon.h
+++ b/include/linux/platform_data/gsc_hwmon.h
@@ -29,18 +29,17 @@ struct gsc_hwmon_channel {
 
 /**
  * struct gsc_hwmon_platform_data - platform data for gsc_hwmon driver
- * @channels:	pointer to array of gsc_hwmon_channel structures
- *		describing channels
  * @nchannels:	number of elements in @channels array
  * @vreference: voltage reference (mV)
  * @resolution: ADC bit resolution
  * @fan_base: register base for FAN controller
+ * @channels:	array of gsc_hwmon_channel structures describing channels
  */
 struct gsc_hwmon_platform_data {
-	const struct gsc_hwmon_channel *channels;
 	int nchannels;
 	unsigned int resolution;
 	unsigned int vreference;
 	unsigned int fan_base;
+	struct gsc_hwmon_channel channels[];
 };
 #endif