Merge tag 'mfd-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - Constify structures; throughout the subsystem
   - Move support to DT in; cros_ec
   - DT changes and documentation; cros-ec, max77693, max77686, arizona, da9063
   - ACPI changes and documentation; mfd-core
   - Use different platform specific API in; cros_ec_*, arizona-core
   - Remove unused parent field from; cros_ec_i2c
   - Add wake-up/reset delay in; cross_ec_spi, arizona-core
   - Staticise structures/functions in; cros_ec
   - Remove redundant code; arizona-core, max77686
   - Bugfix; twl4030-power
   - Allow compile test; aat2870, tps65910
   - MAINTAINERS adaptions; samsung, syscon
   - Resource Management (devm_*); arizona-core
   - Refactor Reset code; arizona-core
   - Insist on at least one full boot; arizona-core
   - Trivial formatting; arizona-core
   - Add low-power-sleep; arizona-core
   - IRQ ONESHOT changes; twl4030-irq, mc13xxx-core, wm831x-auxadc, htc-i2cpld,
                          wm8350-core, ab8500-debugfs, ab8500-gpadc, si476x-i2c

  (Re-)moved drivers:
   - Move protocol helpers out to drivers/platform; cros_ec

  New drivers/supported devices:
   - Add support for AXP22x into axp20x
   - Add support for OnKey into da9063-core
   - Add support for Pinctrl into mt6397-core
   - New STMicroelectronics LPC Watchdog driver
   - New STMicroelectronics LPC Real-Time Clock driver"

* tag 'mfd-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (59 commits)
  mfd: lpc_ich: Assign subdevice ids automatically
  mfd: si476x-i2c: Pass the IRQF_ONESHOT flag
  mfd: ab8500-gpadc: Pass the IRQF_ONESHOT flag
  mfd: ab8500-debugfs: Pass the IRQF_ONESHOT flag
  mfd: wm8350-core: Pass the IRQF_ONESHOT flag
  mfd: htc-i2cpld: Pass the IRQF_ONESHOT flag
  mfd: wm831x-auxadc: Pass the IRQF_ONESHOT flag
  mfd: mc13xxx-core: Pass the IRQF_ONESHOT flag
  mfd: twl4030-irq: Pass the IRQF_ONESHOT flag
  mfd: mt6397-core: Add GPIO sub-module support
  mfd: arizona: Add convience defines for micd_rate/micd_bias_starttime
  mfd: dt: Add bindings for DA9063 OnKey
  mfd: da9063: Add support for OnKey driver
  mfd: arizona: Fix incorrect Makefile conditionals
  mfd: arizona: Add stub for wm5102_patch()
  mfd: Check ACPI device companion before checking resources
  Documentation: Add WM8998/WM1814 device tree bindings
  mfd: arizona: Split INx_MODE into two fields
  mfd: wm5110: Add delay before releasing reset line
  mfd: arizona: Add better support for system suspend
  ...

11 files changed, 475 insertions, 52 deletions

diff --git a/include/dt-bindings/mfd/arizona.h b/include/dt-bindings/mfd/arizona.h
index c7af7c7ef793..555609910acb 100644
--- a/include/dt-bindings/mfd/arizona.h
+++ b/include/dt-bindings/mfd/arizona.h
@@ -90,4 +90,18 @@
 #define ARIZONA_INMODE_SE   1
 #define ARIZONA_INMODE_DMIC 2
 
+#define ARIZONA_MICD_TIME_CONTINUOUS                 0
+#define ARIZONA_MICD_TIME_250US                      1
+#define ARIZONA_MICD_TIME_500US                      2
+#define ARIZONA_MICD_TIME_1MS                        3
+#define ARIZONA_MICD_TIME_2MS                        4
+#define ARIZONA_MICD_TIME_4MS                        5
+#define ARIZONA_MICD_TIME_8MS                        6
+#define ARIZONA_MICD_TIME_16MS                       7
+#define ARIZONA_MICD_TIME_32MS                       8
+#define ARIZONA_MICD_TIME_64MS                       9
+#define ARIZONA_MICD_TIME_128MS                      10
+#define ARIZONA_MICD_TIME_256MS                      11
+#define ARIZONA_MICD_TIME_512MS                      12
+
 #endif
diff --git a/include/dt-bindings/mfd/st-lpc.h b/include/dt-bindings/mfd/st-lpc.h
new file mode 100644
index 000000000000..e3e6c75d8822
--- /dev/null
+++ b/include/dt-bindings/mfd/st-lpc.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides shared DT/Driver defines for ST's LPC device
+ *
+ * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
+ *
+ * Author: Lee Jones <lee.jones@linaro.org> for STMicroelectronics
+ */
+
+#ifndef __DT_BINDINGS_ST_LPC_H__
+#define __DT_BINDINGS_ST_LPC_H__
+
+#define ST_LPC_MODE_RTC		0
+#define ST_LPC_MODE_WDT		1
+
+#endif /* __DT_BINDINGS_ST_LPC_H__ */
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 0bc03f100d04..9ad7828d9d34 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -675,6 +675,7 @@ struct twl4030_power_data {
 	struct twl4030_resconfig *board_config;
 #define TWL4030_RESCONFIG_UNDEF	((u8)-1)
 	bool use_poweroff;	/* Board is wired for TWL poweroff */
+	bool ac_charger_quirk;	/* Disable AC charger on board */
 };
 
 extern int twl4030_remove_script(u8 flags);
diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
index 16a498f48169..2f434f4f79a1 100644
--- a/include/linux/mfd/arizona/core.h
+++ b/include/linux/mfd/arizona/core.h
@@ -117,6 +117,7 @@ struct arizona {
 	int num_core_supplies;
 	struct regulator_bulk_data core_supplies[ARIZONA_MAX_CORE_SUPPLIES];
 	struct regulator *dcvdd;
+	bool has_fully_powered_off;
 
 	struct arizona_pdata pdata;
 
@@ -153,7 +154,15 @@ int arizona_request_irq(struct arizona *arizona, int irq, char *name,
 void arizona_free_irq(struct arizona *arizona, int irq, void *data);
 int arizona_set_irq_wake(struct arizona *arizona, int irq, int on);
 
+#ifdef CONFIG_MFD_WM5102
 int wm5102_patch(struct arizona *arizona);
+#else
+static inline int wm5102_patch(struct arizona *arizona)
+{
+	return 0;
+}
+#endif
+
 int wm5110_patch(struct arizona *arizona);
 int wm8997_patch(struct arizona *arizona);
 
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 1789cb0f4f17..f6722677e6d0 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -156,7 +156,10 @@ struct arizona_pdata {
 	/** MICBIAS configurations */
 	struct arizona_micbias micbias[ARIZONA_MAX_MICBIAS];
 
-	/** Mode of input structures */
+	/**
+	 * Mode of input structures
+	 * One of the ARIZONA_INMODE_xxx values
+	 */
 	int inmode[ARIZONA_MAX_INPUT];
 
 	/** Mode for outputs */
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index aacc10d7789c..3499d36e6067 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -2515,9 +2515,12 @@
 #define ARIZONA_IN1_DMIC_SUP_MASK                0x1800  /* IN1_DMIC_SUP - [12:11] */
 #define ARIZONA_IN1_DMIC_SUP_SHIFT                   11  /* IN1_DMIC_SUP - [12:11] */
 #define ARIZONA_IN1_DMIC_SUP_WIDTH                    2  /* IN1_DMIC_SUP - [12:11] */
-#define ARIZONA_IN1_MODE_MASK                    0x0600  /* IN1_MODE - [10:9] */
-#define ARIZONA_IN1_MODE_SHIFT                        9  /* IN1_MODE - [10:9] */
-#define ARIZONA_IN1_MODE_WIDTH                        2  /* IN1_MODE - [10:9] */
+#define ARIZONA_IN1_MODE_MASK                    0x0400  /* IN1_MODE - [10] */
+#define ARIZONA_IN1_MODE_SHIFT                       10  /* IN1_MODE - [10] */
+#define ARIZONA_IN1_MODE_WIDTH                        1  /* IN1_MODE - [10] */
+#define ARIZONA_IN1_SINGLE_ENDED_MASK            0x0200  /* IN1_MODE - [9] */
+#define ARIZONA_IN1_SINGLE_ENDED_SHIFT                9  /* IN1_MODE - [9] */
+#define ARIZONA_IN1_SINGLE_ENDED_WIDTH                1  /* IN1_MODE - [9] */
 #define ARIZONA_IN1L_PGA_VOL_MASK                0x00FE  /* IN1L_PGA_VOL - [7:1] */
 #define ARIZONA_IN1L_PGA_VOL_SHIFT                    1  /* IN1L_PGA_VOL - [7:1] */
 #define ARIZONA_IN1L_PGA_VOL_WIDTH                    7  /* IN1L_PGA_VOL - [7:1] */
@@ -2588,9 +2591,12 @@
 #define ARIZONA_IN2_DMIC_SUP_MASK                0x1800  /* IN2_DMIC_SUP - [12:11] */
 #define ARIZONA_IN2_DMIC_SUP_SHIFT                   11  /* IN2_DMIC_SUP - [12:11] */
 #define ARIZONA_IN2_DMIC_SUP_WIDTH                    2  /* IN2_DMIC_SUP - [12:11] */
-#define ARIZONA_IN2_MODE_MASK                    0x0600  /* IN2_MODE - [10:9] */
-#define ARIZONA_IN2_MODE_SHIFT                        9  /* IN2_MODE - [10:9] */
-#define ARIZONA_IN2_MODE_WIDTH                        2  /* IN2_MODE - [10:9] */
+#define ARIZONA_IN2_MODE_MASK                    0x0400  /* IN2_MODE - [10] */
+#define ARIZONA_IN2_MODE_SHIFT                       10  /* IN2_MODE - [10] */
+#define ARIZONA_IN2_MODE_WIDTH                        1  /* IN2_MODE - [10] */
+#define ARIZONA_IN2_SINGLE_ENDED_MASK            0x0200  /* IN2_MODE - [9] */
+#define ARIZONA_IN2_SINGLE_ENDED_SHIFT                9  /* IN2_MODE - [9] */
+#define ARIZONA_IN2_SINGLE_ENDED_WIDTH                1  /* IN2_MODE - [9] */
 #define ARIZONA_IN2L_PGA_VOL_MASK                0x00FE  /* IN2L_PGA_VOL - [7:1] */
 #define ARIZONA_IN2L_PGA_VOL_SHIFT                    1  /* IN2L_PGA_VOL - [7:1] */
 #define ARIZONA_IN2L_PGA_VOL_WIDTH                    7  /* IN2L_PGA_VOL - [7:1] */
@@ -2661,9 +2667,12 @@
 #define ARIZONA_IN3_DMIC_SUP_MASK                0x1800  /* IN3_DMIC_SUP - [12:11] */
 #define ARIZONA_IN3_DMIC_SUP_SHIFT                   11  /* IN3_DMIC_SUP - [12:11] */
 #define ARIZONA_IN3_DMIC_SUP_WIDTH                    2  /* IN3_DMIC_SUP - [12:11] */
-#define ARIZONA_IN3_MODE_MASK                    0x0600  /* IN3_MODE - [10:9] */
-#define ARIZONA_IN3_MODE_SHIFT                        9  /* IN3_MODE - [10:9] */
-#define ARIZONA_IN3_MODE_WIDTH                        2  /* IN3_MODE - [10:9] */
+#define ARIZONA_IN3_MODE_MASK                    0x0400  /* IN3_MODE - [10] */
+#define ARIZONA_IN3_MODE_SHIFT                       10  /* IN3_MODE - [10] */
+#define ARIZONA_IN3_MODE_WIDTH                        1  /* IN3_MODE - [10] */
+#define ARIZONA_IN3_SINGLE_ENDED_MASK            0x0200  /* IN3_MODE - [9] */
+#define ARIZONA_IN3_SINGLE_ENDED_SHIFT                9  /* IN3_MODE - [9] */
+#define ARIZONA_IN3_SINGLE_ENDED_WIDTH                1  /* IN3_MODE - [9] */
 #define ARIZONA_IN3L_PGA_VOL_MASK                0x00FE  /* IN3L_PGA_VOL - [7:1] */
 #define ARIZONA_IN3L_PGA_VOL_SHIFT                    1  /* IN3L_PGA_VOL - [7:1] */
 #define ARIZONA_IN3L_PGA_VOL_WIDTH                    7  /* IN3L_PGA_VOL - [7:1] */
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index f9030df5acd1..02f97dc568ac 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -14,6 +14,7 @@
 enum {
 	AXP202_ID = 0,
 	AXP209_ID,
+	AXP221_ID,
 	AXP288_ID,
 	NR_AXP20X_VARIANTS,
 };
@@ -45,6 +46,28 @@ enum {
 #define AXP20X_V_LTF_DISCHRG		0x3c
 #define AXP20X_V_HTF_DISCHRG		0x3d
 
+#define AXP22X_PWR_OUT_CTRL1		0x10
+#define AXP22X_PWR_OUT_CTRL2		0x12
+#define AXP22X_PWR_OUT_CTRL3		0x13
+#define AXP22X_DLDO1_V_OUT		0x15
+#define AXP22X_DLDO2_V_OUT		0x16
+#define AXP22X_DLDO3_V_OUT		0x17
+#define AXP22X_DLDO4_V_OUT		0x18
+#define AXP22X_ELDO1_V_OUT		0x19
+#define AXP22X_ELDO2_V_OUT		0x1a
+#define AXP22X_ELDO3_V_OUT		0x1b
+#define AXP22X_DC5LDO_V_OUT		0x1c
+#define AXP22X_DCDC1_V_OUT		0x21
+#define AXP22X_DCDC2_V_OUT		0x22
+#define AXP22X_DCDC3_V_OUT		0x23
+#define AXP22X_DCDC4_V_OUT		0x24
+#define AXP22X_DCDC5_V_OUT		0x25
+#define AXP22X_DCDC23_V_RAMP_CTRL	0x27
+#define AXP22X_ALDO1_V_OUT		0x28
+#define AXP22X_ALDO2_V_OUT		0x29
+#define AXP22X_ALDO3_V_OUT		0x2a
+#define AXP22X_CHRG_CTRL3		0x35
+
 /* Interrupt */
 #define AXP20X_IRQ1_EN			0x40
 #define AXP20X_IRQ2_EN			0x41
@@ -100,6 +123,9 @@ enum {
 #define AXP20X_VBUS_MON			0x8b
 #define AXP20X_OVER_TMP			0x8f
 
+#define AXP22X_PWREN_CTRL1		0x8c
+#define AXP22X_PWREN_CTRL2		0x8d
+
 /* GPIO */
 #define AXP20X_GPIO0_CTRL		0x90
 #define AXP20X_LDO5_V_OUT		0x91
@@ -108,6 +134,11 @@ enum {
 #define AXP20X_GPIO20_SS		0x94
 #define AXP20X_GPIO3_CTRL		0x95
 
+#define AXP22X_LDO_IO0_V_OUT		0x91
+#define AXP22X_LDO_IO1_V_OUT		0x93
+#define AXP22X_GPIO_STATE		0x94
+#define AXP22X_GPIO_PULL_DOWN		0x95
+
 /* Battery */
 #define AXP20X_CHRG_CC_31_24		0xb0
 #define AXP20X_CHRG_CC_23_16		0xb1
@@ -120,6 +151,9 @@ enum {
 #define AXP20X_CC_CTRL			0xb8
 #define AXP20X_FG_RES			0xb9
 
+/* AXP22X specific registers */
+#define AXP22X_BATLOW_THRES1		0xe6
+
 /* AXP288 specific registers */
 #define AXP288_PMIC_ADC_H               0x56
 #define AXP288_PMIC_ADC_L               0x57
@@ -158,6 +192,30 @@ enum {
 	AXP20X_REG_ID_MAX,
 };
 
+enum {
+	AXP22X_DCDC1 = 0,
+	AXP22X_DCDC2,
+	AXP22X_DCDC3,
+	AXP22X_DCDC4,
+	AXP22X_DCDC5,
+	AXP22X_DC1SW,
+	AXP22X_DC5LDO,
+	AXP22X_ALDO1,
+	AXP22X_ALDO2,
+	AXP22X_ALDO3,
+	AXP22X_ELDO1,
+	AXP22X_ELDO2,
+	AXP22X_ELDO3,
+	AXP22X_DLDO1,
+	AXP22X_DLDO2,
+	AXP22X_DLDO3,
+	AXP22X_DLDO4,
+	AXP22X_RTC_LDO,
+	AXP22X_LDO_IO0,
+	AXP22X_LDO_IO1,
+	AXP22X_REG_ID_MAX,
+};
+
 /* IRQs */
 enum {
 	AXP20X_IRQ_ACIN_OVER_V = 1,
@@ -199,6 +257,34 @@ enum {
 	AXP20X_IRQ_GPIO0_INPUT,
 };
 
+enum axp22x_irqs {
+	AXP22X_IRQ_ACIN_OVER_V = 1,
+	AXP22X_IRQ_ACIN_PLUGIN,
+	AXP22X_IRQ_ACIN_REMOVAL,
+	AXP22X_IRQ_VBUS_OVER_V,
+	AXP22X_IRQ_VBUS_PLUGIN,
+	AXP22X_IRQ_VBUS_REMOVAL,
+	AXP22X_IRQ_VBUS_V_LOW,
+	AXP22X_IRQ_BATT_PLUGIN,
+	AXP22X_IRQ_BATT_REMOVAL,
+	AXP22X_IRQ_BATT_ENT_ACT_MODE,
+	AXP22X_IRQ_BATT_EXIT_ACT_MODE,
+	AXP22X_IRQ_CHARG,
+	AXP22X_IRQ_CHARG_DONE,
+	AXP22X_IRQ_BATT_TEMP_HIGH,
+	AXP22X_IRQ_BATT_TEMP_LOW,
+	AXP22X_IRQ_DIE_TEMP_HIGH,
+	AXP22X_IRQ_PEK_SHORT,
+	AXP22X_IRQ_PEK_LONG,
+	AXP22X_IRQ_LOW_PWR_LVL1,
+	AXP22X_IRQ_LOW_PWR_LVL2,
+	AXP22X_IRQ_TIMER,
+	AXP22X_IRQ_PEK_RIS_EDGE,
+	AXP22X_IRQ_PEK_FAL_EDGE,
+	AXP22X_IRQ_GPIO1_INPUT,
+	AXP22X_IRQ_GPIO0_INPUT,
+};
+
 enum axp288_irqs {
 	AXP288_IRQ_VBUS_FALL     = 2,
 	AXP288_IRQ_VBUS_RISE,
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index 324a34683971..da72671a42fa 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -17,10 +17,29 @@
 #define __LINUX_MFD_CROS_EC_H
 
 #include <linux/cdev.h>
+#include <linux/device.h>
 #include <linux/notifier.h>
 #include <linux/mfd/cros_ec_commands.h>
 #include <linux/mutex.h>
 
+#define CROS_EC_DEV_NAME "cros_ec"
+#define CROS_EC_DEV_PD_NAME "cros_pd"
+
+/*
+ * The EC is unresponsive for a time after a reboot command.  Add a
+ * simple delay to make sure that the bus stays locked.
+ */
+#define EC_REBOOT_DELAY_MS             50
+
+/*
+ * Max bus-specific overhead incurred by request/responses.
+ * I2C requires 1 additional byte for requests.
+ * I2C requires 2 additional bytes for responses.
+ * */
+#define EC_PROTO_VERSION_UNKNOWN	0
+#define EC_MAX_REQUEST_OVERHEAD		1
+#define EC_MAX_RESPONSE_OVERHEAD	2
+
 /*
  * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
  */
@@ -42,8 +61,7 @@ enum {
  * @outsize: Outgoing length in bytes
  * @insize: Max number of bytes to accept from EC
  * @result: EC's response to the command (separate from communication failure)
- * @outdata: Outgoing data to EC
- * @indata: Where to put the incoming data from EC
+ * @data: Where to put the incoming data from EC and outgoing data to EC
  */
 struct cros_ec_command {
 	uint32_t version;
@@ -51,18 +69,14 @@ struct cros_ec_command {
 	uint32_t outsize;
 	uint32_t insize;
 	uint32_t result;
-	uint8_t outdata[EC_PROTO2_MAX_PARAM_SIZE];
-	uint8_t indata[EC_PROTO2_MAX_PARAM_SIZE];
+	uint8_t data[0];
 };
 
 /**
  * struct cros_ec_device - Information about a ChromeOS EC device
  *
- * @ec_name: name of EC device (e.g. 'chromeos-ec')
  * @phys_name: name of physical comms layer (e.g. 'i2c-4')
  * @dev: Device pointer for physical comms device
- * @vdev: Device pointer for virtual comms device
- * @cdev: Character device structure for virtual comms device
  * @was_wake_device: true if this device was set to wake the system from
  * sleep at the last suspend
  * @cmd_readmem: direct read of the EC memory-mapped region, if supported
@@ -74,6 +88,7 @@ struct cros_ec_command {
  *
  * @priv: Private data
  * @irq: Interrupt to use
+ * @id: Device id
  * @din: input buffer (for data from EC)
  * @dout: output buffer (for data to EC)
  * \note
@@ -85,41 +100,72 @@ struct cros_ec_command {
  * to using dword.
  * @din_size: size of din buffer to allocate (zero to use static din)
  * @dout_size: size of dout buffer to allocate (zero to use static dout)
- * @parent: pointer to parent device (e.g. i2c or spi device)
  * @wake_enabled: true if this device can wake the system from sleep
  * @cmd_xfer: send command to EC and get response
  *     Returns the number of bytes received if the communication succeeded, but
  *     that doesn't mean the EC was happy with the command. The caller
  *     should check msg.result for the EC's result code.
+ * @pkt_xfer: send packet to EC and get response
  * @lock: one transaction at a time
  */
 struct cros_ec_device {
 
 	/* These are used by other drivers that want to talk to the EC */
-	const char *ec_name;
 	const char *phys_name;
 	struct device *dev;
-	struct device *vdev;
-	struct cdev cdev;
 	bool was_wake_device;
 	struct class *cros_class;
 	int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
 			   unsigned int bytes, void *dest);
 
 	/* These are used to implement the platform-specific interface */
+	u16 max_request;
+	u16 max_response;
+	u16 max_passthru;
+	u16 proto_version;
 	void *priv;
 	int irq;
-	uint8_t *din;
-	uint8_t *dout;
+	u8 *din;
+	u8 *dout;
 	int din_size;
 	int dout_size;
-	struct device *parent;
 	bool wake_enabled;
 	int (*cmd_xfer)(struct cros_ec_device *ec,
 			struct cros_ec_command *msg);
+	int (*pkt_xfer)(struct cros_ec_device *ec,
+			struct cros_ec_command *msg);
 	struct mutex lock;
 };
 
+/* struct cros_ec_platform - ChromeOS EC platform information
+ *
+ * @ec_name: name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
+ * used in /dev/ and sysfs.
+ * @cmd_offset: offset to apply for each command. Set when
+ * registering a devicde behind another one.
+ */
+struct cros_ec_platform {
+	const char *ec_name;
+	u16 cmd_offset;
+};
+
+/*
+ * struct cros_ec_dev - ChromeOS EC device entry point
+ *
+ * @class_dev: Device structure used in sysfs
+ * @cdev: Character device structure in /dev
+ * @ec_dev: cros_ec_device structure to talk to the physical device
+ * @dev: pointer to the platform device
+ * @cmd_offset: offset to apply for each command.
+ */
+struct cros_ec_dev {
+	struct device class_dev;
+	struct cdev cdev;
+	struct cros_ec_device *ec_dev;
+	struct device *dev;
+	u16 cmd_offset;
+};
+
 /**
  * cros_ec_suspend - Handle a suspend operation for the ChromeOS EC device
  *
@@ -198,4 +244,16 @@ int cros_ec_remove(struct cros_ec_device *ec_dev);
  */
 int cros_ec_register(struct cros_ec_device *ec_dev);
 
+/**
+ * cros_ec_register -  Query the protocol version supported by the ChromeOS EC
+ *
+ * @ec_dev: Device to register
+ * @return 0 if ok, -ve on error
+ */
+int cros_ec_query_all(struct cros_ec_device *ec_dev);
+
+/* sysfs stuff */
+extern struct attribute_group cros_ec_attr_group;
+extern struct attribute_group cros_ec_lightbar_attr_group;
+
 #endif /* __LINUX_MFD_CROS_EC_H */
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index a49cd41feea7..13b630c10d4c 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -515,7 +515,7 @@ struct ec_host_response {
 /*
  * Notes on commands:
  *
- * Each command is an 8-byte command value.  Commands which take params or
+ * Each command is an 16-bit command value.  Commands which take params or
  * return response data specify structs for that data.  If no struct is
  * specified, the command does not input or output data, respectively.
  * Parameter/response length is implicit in the structs.  Some underlying
@@ -966,7 +966,7 @@ struct rgb_s {
 /* List of tweakable parameters. NOTE: It's __packed so it can be sent in a
  * host command, but the alignment is the same regardless. Keep it that way.
  */
-struct lightbar_params {
+struct lightbar_params_v0 {
 	/* Timing */
 	int32_t google_ramp_up;
 	int32_t google_ramp_down;
@@ -1000,32 +1000,81 @@ struct lightbar_params {
 	struct rgb_s color[8];			/* 0-3 are Google colors */
 } __packed;
 
+struct lightbar_params_v1 {
+	/* Timing */
+	int32_t google_ramp_up;
+	int32_t google_ramp_down;
+	int32_t s3s0_ramp_up;
+	int32_t s0_tick_delay[2];		/* AC=0/1 */
+	int32_t s0a_tick_delay[2];		/* AC=0/1 */
+	int32_t s0s3_ramp_down;
+	int32_t s3_sleep_for;
+	int32_t s3_ramp_up;
+	int32_t s3_ramp_down;
+	int32_t tap_tick_delay;
+	int32_t tap_display_time;
+
+	/* Tap-for-battery params */
+	uint8_t tap_pct_red;
+	uint8_t tap_pct_green;
+	uint8_t tap_seg_min_on;
+	uint8_t tap_seg_max_on;
+	uint8_t tap_seg_osc;
+	uint8_t tap_idx[3];
+
+	/* Oscillation */
+	uint8_t osc_min[2];			/* AC=0/1 */
+	uint8_t osc_max[2];			/* AC=0/1 */
+	uint8_t w_ofs[2];			/* AC=0/1 */
+
+	/* Brightness limits based on the backlight and AC. */
+	uint8_t bright_bl_off_fixed[2];		/* AC=0/1 */
+	uint8_t bright_bl_on_min[2];		/* AC=0/1 */
+	uint8_t bright_bl_on_max[2];		/* AC=0/1 */
+
+	/* Battery level thresholds */
+	uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
+
+	/* Map [AC][battery_level] to color index */
+	uint8_t s0_idx[2][LB_BATTERY_LEVELS];	/* AP is running */
+	uint8_t s3_idx[2][LB_BATTERY_LEVELS];	/* AP is sleeping */
+
+	/* Color palette */
+	struct rgb_s color[8];			/* 0-3 are Google colors */
+} __packed;
+
 struct ec_params_lightbar {
 	uint8_t cmd;		      /* Command (see enum lightbar_command) */
 	union {
 		struct {
 			/* no args */
-		} dump, off, on, init, get_seq, get_params, version;
+		} dump, off, on, init, get_seq, get_params_v0, get_params_v1,
+			version, get_brightness, get_demo;
 
-		struct num {
+		struct {
 			uint8_t num;
-		} brightness, seq, demo;
+		} set_brightness, seq, demo;
 
-		struct reg {
+		struct {
 			uint8_t ctrl, reg, value;
 		} reg;
 
-		struct rgb {
+		struct {
 			uint8_t led, red, green, blue;
-		} rgb;
+		} set_rgb;
+
+		struct {
+			uint8_t led;
+		} get_rgb;
 
-		struct lightbar_params set_params;
+		struct lightbar_params_v0 set_params_v0;
+		struct lightbar_params_v1 set_params_v1;
 	};
 } __packed;
 
 struct ec_response_lightbar {
 	union {
-		struct dump {
+		struct {
 			struct {
 				uint8_t reg;
 				uint8_t ic0;
@@ -1033,20 +1082,26 @@ struct ec_response_lightbar {
 			} vals[23];
 		} dump;
 
-		struct get_seq {
+		struct  {
 			uint8_t num;
-		} get_seq;
+		} get_seq, get_brightness, get_demo;
 
-		struct lightbar_params get_params;
+		struct lightbar_params_v0 get_params_v0;
+		struct lightbar_params_v1 get_params_v1;
 
-		struct version {
+		struct {
 			uint32_t num;
 			uint32_t flags;
 		} version;
 
 		struct {
+			uint8_t red, green, blue;
+		} get_rgb;
+
+		struct {
 			/* no return params */
-		} off, on, init, brightness, seq, reg, rgb, demo, set_params;
+		} off, on, init, set_brightness, seq, reg, set_rgb,
+			demo, set_params_v0, set_params_v1;
 	};
 } __packed;
 
@@ -1056,15 +1111,20 @@ enum lightbar_command {
 	LIGHTBAR_CMD_OFF = 1,
 	LIGHTBAR_CMD_ON = 2,
 	LIGHTBAR_CMD_INIT = 3,
-	LIGHTBAR_CMD_BRIGHTNESS = 4,
+	LIGHTBAR_CMD_SET_BRIGHTNESS = 4,
 	LIGHTBAR_CMD_SEQ = 5,
 	LIGHTBAR_CMD_REG = 6,
-	LIGHTBAR_CMD_RGB = 7,
+	LIGHTBAR_CMD_SET_RGB = 7,
 	LIGHTBAR_CMD_GET_SEQ = 8,
 	LIGHTBAR_CMD_DEMO = 9,
-	LIGHTBAR_CMD_GET_PARAMS = 10,
-	LIGHTBAR_CMD_SET_PARAMS = 11,
+	LIGHTBAR_CMD_GET_PARAMS_V0 = 10,
+	LIGHTBAR_CMD_SET_PARAMS_V0 = 11,
 	LIGHTBAR_CMD_VERSION = 12,
+	LIGHTBAR_CMD_GET_BRIGHTNESS = 13,
+	LIGHTBAR_CMD_GET_RGB = 14,
+	LIGHTBAR_CMD_GET_DEMO = 15,
+	LIGHTBAR_CMD_GET_PARAMS_V1 = 16,
+	LIGHTBAR_CMD_SET_PARAMS_V1 = 17,
 	LIGHTBAR_NUM_CMDS
 };
 
@@ -1421,8 +1481,40 @@ struct ec_response_rtc {
 /*****************************************************************************/
 /* Port80 log access */
 
+/* Maximum entries that can be read/written in a single command */
+#define EC_PORT80_SIZE_MAX 32
+
 /* Get last port80 code from previous boot */
 #define EC_CMD_PORT80_LAST_BOOT 0x48
+#define EC_CMD_PORT80_READ 0x48
+
+enum ec_port80_subcmd {
+	EC_PORT80_GET_INFO = 0,
+	EC_PORT80_READ_BUFFER,
+};
+
+struct ec_params_port80_read {
+	uint16_t subcmd;
+	union {
+		struct {
+			uint32_t offset;
+			uint32_t num_entries;
+		} read_buffer;
+	};
+} __packed;
+
+struct ec_response_port80_read {
+	union {
+		struct {
+			uint32_t writes;
+			uint32_t history_size;
+			uint32_t last_boot;
+		} get_info;
+		struct {
+			uint16_t codes[EC_PORT80_SIZE_MAX];
+		} data;
+	};
+} __packed;
 
 struct ec_response_port80_last_boot {
 	uint16_t code;
@@ -1782,6 +1874,7 @@ struct ec_params_gpio_set {
 /* Get GPIO value */
 #define EC_CMD_GPIO_GET 0x93
 
+/* Version 0 of input params and response */
 struct ec_params_gpio_get {
 	char name[32];
 } __packed;
@@ -1789,6 +1882,38 @@ struct ec_response_gpio_get {
 	uint8_t val;
 } __packed;
 
+/* Version 1 of input params and response */
+struct ec_params_gpio_get_v1 {
+	uint8_t subcmd;
+	union {
+		struct {
+			char name[32];
+		} get_value_by_name;
+		struct {
+			uint8_t index;
+		} get_info;
+	};
+} __packed;
+
+struct ec_response_gpio_get_v1 {
+	union {
+		struct {
+			uint8_t val;
+		} get_value_by_name, get_count;
+		struct {
+			uint8_t val;
+			char name[32];
+			uint32_t flags;
+		} get_info;
+	};
+} __packed;
+
+enum gpio_get_subcmd {
+	EC_GPIO_GET_BY_NAME = 0,
+	EC_GPIO_GET_COUNT = 1,
+	EC_GPIO_GET_INFO = 2,
+};
+
 /*****************************************************************************/
 /* I2C commands. Only available when flash write protect is unlocked. */
 
@@ -1857,13 +1982,21 @@ struct ec_params_charge_control {
 /*****************************************************************************/
 
 /*
- * Cut off battery power output if the battery supports.
+ * Cut off battery power immediately or after the host has shut down.
  *
- * For unsupported battery, just don't implement this command and lets EC
- * return EC_RES_INVALID_COMMAND.
+ * return EC_RES_INVALID_COMMAND if unsupported by a board/battery.
+ *	  EC_RES_SUCCESS if the command was successful.
+ *	  EC_RES_ERROR if the cut off command failed.
  */
+
 #define EC_CMD_BATTERY_CUT_OFF 0x99
 
+#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN	(1 << 0)
+
+struct ec_params_battery_cutoff {
+	uint8_t flags;
+} __packed;
+
 /*****************************************************************************/
 /* USB port mux control. */
 
@@ -2142,6 +2275,32 @@ struct ec_params_sb_wr_block {
 } __packed;
 
 /*****************************************************************************/
+/* Battery vendor parameters
+ *
+ * Get or set vendor-specific parameters in the battery. Implementations may
+ * differ between boards or batteries. On a set operation, the response
+ * contains the actual value set, which may be rounded or clipped from the
+ * requested value.
+ */
+
+#define EC_CMD_BATTERY_VENDOR_PARAM 0xb4
+
+enum ec_battery_vendor_param_mode {
+	BATTERY_VENDOR_PARAM_MODE_GET = 0,
+	BATTERY_VENDOR_PARAM_MODE_SET,
+};
+
+struct ec_params_battery_vendor_param {
+	uint32_t param;
+	uint32_t value;
+	uint8_t mode;
+} __packed;
+
+struct ec_response_battery_vendor_param {
+	uint32_t value;
+} __packed;
+
+/*****************************************************************************/
 /* System commands */
 
 /*
@@ -2338,6 +2497,80 @@ struct ec_params_reboot_ec {
 
 /*****************************************************************************/
 /*
+ * PD commands
+ *
+ * These commands are for PD MCU communication.
+ */
+
+/* EC to PD MCU exchange status command */
+#define EC_CMD_PD_EXCHANGE_STATUS 0x100
+
+/* Status of EC being sent to PD */
+struct ec_params_pd_status {
+	int8_t batt_soc; /* battery state of charge */
+} __packed;
+
+/* Status of PD being sent back to EC */
+struct ec_response_pd_status {
+	int8_t status;        /* PD MCU status */
+	uint32_t curr_lim_ma; /* input current limit */
+} __packed;
+
+/* Set USB type-C port role and muxes */
+#define EC_CMD_USB_PD_CONTROL 0x101
+
+enum usb_pd_control_role {
+	USB_PD_CTRL_ROLE_NO_CHANGE = 0,
+	USB_PD_CTRL_ROLE_TOGGLE_ON = 1, /* == AUTO */
+	USB_PD_CTRL_ROLE_TOGGLE_OFF = 2,
+	USB_PD_CTRL_ROLE_FORCE_SINK = 3,
+	USB_PD_CTRL_ROLE_FORCE_SOURCE = 4,
+};
+
+enum usb_pd_control_mux {
+	USB_PD_CTRL_MUX_NO_CHANGE = 0,
+	USB_PD_CTRL_MUX_NONE = 1,
+	USB_PD_CTRL_MUX_USB = 2,
+	USB_PD_CTRL_MUX_DP = 3,
+	USB_PD_CTRL_MUX_DOCK = 4,
+	USB_PD_CTRL_MUX_AUTO = 5,
+};
+
+struct ec_params_usb_pd_control {
+	uint8_t port;
+	uint8_t role;
+	uint8_t mux;
+} __packed;
+
+/*****************************************************************************/
+/*
+ * Passthru commands
+ *
+ * Some platforms have sub-processors chained to each other.  For example.
+ *
+ *     AP <--> EC <--> PD MCU
+ *
+ * The top 2 bits of the command number are used to indicate which device the
+ * command is intended for.  Device 0 is always the device receiving the
+ * command; other device mapping is board-specific.
+ *
+ * When a device receives a command to be passed to a sub-processor, it passes
+ * it on with the device number set back to 0.  This allows the sub-processor
+ * to remain blissfully unaware of whether the command originated on the next
+ * device up the chain, or was passed through from the AP.
+ *
+ * In the above example, if the AP wants to send command 0x0002 to the PD MCU,
+ *     AP sends command 0x4002 to the EC
+ *     EC sends command 0x0002 to the PD MCU
+ *     EC forwards PD MCU response back to the AP
+ */
+
+/* Offset and max command number for sub-device n */
+#define EC_CMD_PASSTHRU_OFFSET(n) (0x4000 * (n))
+#define EC_CMD_PASSTHRU_MAX(n) (EC_CMD_PASSTHRU_OFFSET(n) + 0x3fff)
+
+/*****************************************************************************/
+/*
  * Deprecated constants. These constants have been renamed for clarity. The
  * meaning and size has not changed. Programs that use the old names should
  * switch to the new names soon, as the old names may not be carried forward
diff --git a/include/linux/mfd/da9055/core.h b/include/linux/mfd/da9055/core.h
index 956afa445998..5dc743fd63a6 100644
--- a/include/linux/mfd/da9055/core.h
+++ b/include/linux/mfd/da9055/core.h
@@ -89,6 +89,6 @@ static inline int da9055_reg_update(struct da9055 *da9055, unsigned char reg,
 int da9055_device_init(struct da9055 *da9055);
 void da9055_device_exit(struct da9055 *da9055);
 
-extern struct regmap_config da9055_regmap_config;
+extern const struct regmap_config da9055_regmap_config;
 
 #endif /* __DA9055_CORE_H */
diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h
index bb995ab9a575..d4b72d519115 100644
--- a/include/linux/mfd/max77686.h
+++ b/include/linux/mfd/max77686.h
@@ -125,9 +125,4 @@ enum max77686_opmode {
 	MAX77686_OPMODE_STANDBY,
 };
 
-struct max77686_opmode_data {
-	int id;
-	int mode;
-};
-
 #endif /* __LINUX_MFD_MAX77686_H */