Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (255 commits)
  [media] radio-aimslab.c: Fix gcc 4.5+ bug
  [media] cx25821: Fix compilation breakage due to BKL dependency
  [media] v4l2-compat-ioctl32: fix compile warning
  [media] zoran: fix compiler warning
  [media] tda18218: fix compile warning
  [media] ngene: fix compile warning
  [media] DVB: IR support for TechnoTrend CT-3650
  [media] cx23885, cimax2.c: Fix case of two CAM insertion irq
  [media] ir-nec-decoder: fix repeat key issue
  [media] staging: se401 depends on USB
  [media] staging: usbvideo/vicam depends on USB
  [media] soc_camera: Add the ability to bind regulators to soc_camedra devices
  [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensor
  [media] v4l: soc-camera: switch to .unlocked_ioctl
  [media] v4l: ov772x: simplify pointer dereference
  [media] ov9640: fix OmniVision OV9640 sensor driver's priv data retrieving
  [media] ov9640: use macro to request OmniVision OV9640 sensor private data
  [media] ivtv-i2c: Fix two warnings
  [media] staging/lirc: Update lirc TODO files
  [media] cx88: Remove the obsolete i2c_adapter.id field
  ...

23 files changed, 604 insertions, 829 deletions

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 97319a8fc1e0..a354c199ab98 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -367,7 +367,6 @@ header-y += utime.h
 header-y += utsname.h
 header-y += veth.h
 header-y += vhost.h
-header-y += videodev.h
 header-y += videodev2.h
 header-y += virtio_9p.h
 header-y += virtio_balloon.h
diff --git a/include/linux/input.h b/include/linux/input.h
index 9777668883be..f7a6e1966df3 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -590,6 +590,8 @@ struct input_keymap_entry {
 #define KEY_FRAMEFORWARD	0x1b5
 #define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
 #define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
+#define KEY_10CHANNELSUP        0x1b8   /* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN      0x1b9   /* 10 channels down (10-) */
 
 #define KEY_DEL_EOL		0x1c0
 #define KEY_DEL_EOS		0x1c1
diff --git a/include/linux/mfd/wl1273-core.h b/include/linux/mfd/wl1273-core.h
new file mode 100644
index 000000000000..9787293eae5f
--- /dev/null
+++ b/include/linux/mfd/wl1273-core.h
@@ -0,0 +1,288 @@
+/*
+ * include/linux/mfd/wl1273-core.h
+ *
+ * Some definitions for the wl1273 radio receiver/transmitter chip.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Author: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef WL1273_CORE_H
+#define WL1273_CORE_H
+
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+
+#define WL1273_FM_DRIVER_NAME	"wl1273-fm"
+#define RX71_FM_I2C_ADDR	0x22
+
+#define WL1273_STEREO_GET		0
+#define WL1273_RSSI_LVL_GET		1
+#define WL1273_IF_COUNT_GET		2
+#define WL1273_FLAG_GET			3
+#define WL1273_RDS_SYNC_GET		4
+#define WL1273_RDS_DATA_GET		5
+#define WL1273_FREQ_SET			10
+#define WL1273_AF_FREQ_SET		11
+#define WL1273_MOST_MODE_SET		12
+#define WL1273_MOST_BLEND_SET		13
+#define WL1273_DEMPH_MODE_SET		14
+#define WL1273_SEARCH_LVL_SET		15
+#define WL1273_BAND_SET			16
+#define WL1273_MUTE_STATUS_SET		17
+#define WL1273_RDS_PAUSE_LVL_SET	18
+#define WL1273_RDS_PAUSE_DUR_SET	19
+#define WL1273_RDS_MEM_SET		20
+#define WL1273_RDS_BLK_B_SET		21
+#define WL1273_RDS_MSK_B_SET		22
+#define WL1273_RDS_PI_MASK_SET		23
+#define WL1273_RDS_PI_SET		24
+#define WL1273_RDS_SYSTEM_SET		25
+#define WL1273_INT_MASK_SET		26
+#define WL1273_SEARCH_DIR_SET		27
+#define WL1273_VOLUME_SET		28
+#define WL1273_AUDIO_ENABLE		29
+#define WL1273_PCM_MODE_SET		30
+#define WL1273_I2S_MODE_CONFIG_SET	31
+#define WL1273_POWER_SET		32
+#define WL1273_INTX_CONFIG_SET		33
+#define WL1273_PULL_EN_SET		34
+#define WL1273_HILO_SET			35
+#define WL1273_SWITCH2FREF		36
+#define WL1273_FREQ_DRIFT_REPORT	37
+
+#define WL1273_PCE_GET			40
+#define WL1273_FIRM_VER_GET		41
+#define WL1273_ASIC_VER_GET		42
+#define WL1273_ASIC_ID_GET		43
+#define WL1273_MAN_ID_GET		44
+#define WL1273_TUNER_MODE_SET		45
+#define WL1273_STOP_SEARCH		46
+#define WL1273_RDS_CNTRL_SET		47
+
+#define WL1273_WRITE_HARDWARE_REG	100
+#define WL1273_CODE_DOWNLOAD		101
+#define WL1273_RESET			102
+
+#define WL1273_FM_POWER_MODE		254
+#define WL1273_FM_INTERRUPT		255
+
+/* Transmitter API */
+
+#define WL1273_CHANL_SET			55
+#define WL1273_SCAN_SPACING_SET			56
+#define WL1273_REF_SET				57
+#define WL1273_POWER_ENB_SET			90
+#define WL1273_POWER_ATT_SET			58
+#define WL1273_POWER_LEV_SET			59
+#define WL1273_AUDIO_DEV_SET			60
+#define WL1273_PILOT_DEV_SET			61
+#define WL1273_RDS_DEV_SET			62
+#define WL1273_PUPD_SET				91
+#define WL1273_AUDIO_IO_SET			63
+#define WL1273_PREMPH_SET			64
+#define WL1273_MONO_SET				66
+#define WL1273_MUTE				92
+#define WL1273_MPX_LMT_ENABLE			67
+#define WL1273_PI_SET				93
+#define WL1273_ECC_SET				69
+#define WL1273_PTY				70
+#define WL1273_AF				71
+#define WL1273_DISPLAY_MODE			74
+#define WL1273_RDS_REP_SET			77
+#define WL1273_RDS_CONFIG_DATA_SET		98
+#define WL1273_RDS_DATA_SET			99
+#define WL1273_RDS_DATA_ENB			94
+#define WL1273_TA_SET				78
+#define WL1273_TP_SET				79
+#define WL1273_DI_SET				80
+#define WL1273_MS_SET				81
+#define WL1273_PS_SCROLL_SPEED			82
+#define WL1273_TX_AUDIO_LEVEL_TEST		96
+#define WL1273_TX_AUDIO_LEVEL_TEST_THRESHOLD	73
+#define WL1273_TX_AUDIO_INPUT_LEVEL_RANGE_SET	54
+#define WL1273_RX_ANTENNA_SELECT		87
+#define WL1273_I2C_DEV_ADDR_SET			86
+#define WL1273_REF_ERR_CALIB_PARAM_SET		88
+#define WL1273_REF_ERR_CALIB_PERIODICITY_SET	89
+#define WL1273_SOC_INT_TRIGGER			52
+#define WL1273_SOC_AUDIO_PATH_SET		83
+#define WL1273_SOC_PCMI_OVERRIDE		84
+#define WL1273_SOC_I2S_OVERRIDE			85
+#define WL1273_RSSI_BLOCK_SCAN_FREQ_SET		95
+#define WL1273_RSSI_BLOCK_SCAN_START		97
+#define WL1273_RSSI_BLOCK_SCAN_DATA_GET		5
+#define WL1273_READ_FMANT_TUNE_VALUE		104
+
+#define WL1273_RDS_OFF		0
+#define WL1273_RDS_ON		1
+#define WL1273_RDS_RESET	2
+
+#define WL1273_AUDIO_DIGITAL	0
+#define WL1273_AUDIO_ANALOG	1
+
+#define WL1273_MODE_RX		BIT(0)
+#define WL1273_MODE_TX		BIT(1)
+#define WL1273_MODE_OFF		BIT(2)
+#define WL1273_MODE_SUSPENDED	BIT(3)
+
+#define WL1273_RADIO_CHILD	BIT(0)
+#define WL1273_CODEC_CHILD	BIT(1)
+
+#define WL1273_RX_MONO		1
+#define WL1273_RX_STEREO	0
+#define WL1273_TX_MONO		0
+#define WL1273_TX_STEREO	1
+
+#define WL1273_MAX_VOLUME	0xffff
+#define WL1273_DEFAULT_VOLUME	0x78b8
+
+/* I2S protocol, left channel first, data width 16 bits */
+#define WL1273_PCM_DEF_MODE		0x00
+
+/* Rx */
+#define WL1273_AUDIO_ENABLE_I2S		BIT(0)
+#define WL1273_AUDIO_ENABLE_ANALOG	BIT(1)
+
+/* Tx */
+#define WL1273_AUDIO_IO_SET_ANALOG	0
+#define WL1273_AUDIO_IO_SET_I2S		1
+
+#define WL1273_PUPD_SET_OFF		0x00
+#define WL1273_PUPD_SET_ON		0x01
+#define WL1273_PUPD_SET_RETENTION	0x10
+
+/* I2S mode */
+#define WL1273_IS2_WIDTH_32	0x0
+#define WL1273_IS2_WIDTH_40	0x1
+#define WL1273_IS2_WIDTH_22_23	0x2
+#define WL1273_IS2_WIDTH_23_22	0x3
+#define WL1273_IS2_WIDTH_48	0x4
+#define WL1273_IS2_WIDTH_50	0x5
+#define WL1273_IS2_WIDTH_60	0x6
+#define WL1273_IS2_WIDTH_64	0x7
+#define WL1273_IS2_WIDTH_80	0x8
+#define WL1273_IS2_WIDTH_96	0x9
+#define WL1273_IS2_WIDTH_128	0xa
+#define WL1273_IS2_WIDTH	0xf
+
+#define WL1273_IS2_FORMAT_STD	(0x0 << 4)
+#define WL1273_IS2_FORMAT_LEFT	(0x1 << 4)
+#define WL1273_IS2_FORMAT_RIGHT	(0x2 << 4)
+#define WL1273_IS2_FORMAT_USER	(0x3 << 4)
+
+#define WL1273_IS2_MASTER	(0x0 << 6)
+#define WL1273_IS2_SLAVEW	(0x1 << 6)
+
+#define WL1273_IS2_TRI_AFTER_SENDING	(0x0 << 7)
+#define WL1273_IS2_TRI_ALWAYS_ACTIVE	(0x1 << 7)
+
+#define WL1273_IS2_SDOWS_RR	(0x0 << 8)
+#define WL1273_IS2_SDOWS_RF	(0x1 << 8)
+#define WL1273_IS2_SDOWS_FR	(0x2 << 8)
+#define WL1273_IS2_SDOWS_FF	(0x3 << 8)
+
+#define WL1273_IS2_TRI_OPT	(0x0 << 10)
+#define WL1273_IS2_TRI_ALWAYS	(0x1 << 10)
+
+#define WL1273_IS2_RATE_48K	(0x0 << 12)
+#define WL1273_IS2_RATE_44_1K	(0x1 << 12)
+#define WL1273_IS2_RATE_32K	(0x2 << 12)
+#define WL1273_IS2_RATE_22_05K	(0x4 << 12)
+#define WL1273_IS2_RATE_16K	(0x5 << 12)
+#define WL1273_IS2_RATE_12K	(0x8 << 12)
+#define WL1273_IS2_RATE_11_025	(0x9 << 12)
+#define WL1273_IS2_RATE_8K	(0xa << 12)
+#define WL1273_IS2_RATE		(0xf << 12)
+
+#define WL1273_I2S_DEF_MODE	(WL1273_IS2_WIDTH_32 | \
+				 WL1273_IS2_FORMAT_STD | \
+				 WL1273_IS2_MASTER | \
+				 WL1273_IS2_TRI_AFTER_SENDING | \
+				 WL1273_IS2_SDOWS_RR | \
+				 WL1273_IS2_TRI_OPT | \
+				 WL1273_IS2_RATE_48K)
+
+#define SCHAR_MIN (-128)
+#define SCHAR_MAX 127
+
+#define WL1273_FR_EVENT			BIT(0)
+#define WL1273_BL_EVENT			BIT(1)
+#define WL1273_RDS_EVENT		BIT(2)
+#define WL1273_BBLK_EVENT		BIT(3)
+#define WL1273_LSYNC_EVENT		BIT(4)
+#define WL1273_LEV_EVENT		BIT(5)
+#define WL1273_IFFR_EVENT		BIT(6)
+#define WL1273_PI_EVENT			BIT(7)
+#define WL1273_PD_EVENT			BIT(8)
+#define WL1273_STIC_EVENT		BIT(9)
+#define WL1273_MAL_EVENT		BIT(10)
+#define WL1273_POW_ENB_EVENT		BIT(11)
+#define WL1273_SCAN_OVER_EVENT		BIT(12)
+#define WL1273_ERROR_EVENT		BIT(13)
+
+#define TUNER_MODE_STOP_SEARCH		0
+#define TUNER_MODE_PRESET		1
+#define TUNER_MODE_AUTO_SEEK		2
+#define TUNER_MODE_AF			3
+#define TUNER_MODE_AUTO_SEEK_PI		4
+#define TUNER_MODE_AUTO_SEEK_BULK	5
+
+#define RDS_BLOCK_SIZE	3
+
+struct wl1273_fm_platform_data {
+	int (*request_resources) (struct i2c_client *client);
+	void (*free_resources) (void);
+	void (*enable) (void);
+	void (*disable) (void);
+
+	u8 forbidden_modes;
+	unsigned int children;
+};
+
+#define WL1273_FM_CORE_CELLS	2
+
+#define WL1273_BAND_OTHER	0
+#define WL1273_BAND_JAPAN	1
+
+#define WL1273_BAND_JAPAN_LOW	76000
+#define WL1273_BAND_JAPAN_HIGH	90000
+#define WL1273_BAND_OTHER_LOW	87500
+#define WL1273_BAND_OTHER_HIGH	108000
+
+#define WL1273_BAND_TX_LOW	76000
+#define WL1273_BAND_TX_HIGH	108000
+
+struct wl1273_core {
+	struct mfd_cell cells[WL1273_FM_CORE_CELLS];
+	struct wl1273_fm_platform_data *pdata;
+
+	unsigned int mode;
+	unsigned int i2s_mode;
+	unsigned int volume;
+	unsigned int audio_mode;
+	unsigned int channel_number;
+	struct mutex lock; /* for serializing fm radio operations */
+
+	struct i2c_client *client;
+
+	int (*write)(struct wl1273_core *core, u8, u16);
+	int (*set_audio)(struct wl1273_core *core, unsigned int);
+	int (*set_volume)(struct wl1273_core *core, unsigned int);
+};
+
+#endif	/* ifndef WL1273_CORE_H */
diff --git a/include/linux/videodev.h b/include/linux/videodev.h
deleted file mode 100644
index b19eab140977..000000000000
--- a/include/linux/videodev.h
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- *	Video for Linux version 1 - OBSOLETE
- *
- *	Header file for v4l1 drivers and applications, for
- *	Linux kernels 2.2.x or 2.4.x.
- *
- *	Provides header for legacy drivers and applications
- *
- *	See http://linuxtv.org for more info
- *
- */
-#ifndef __LINUX_VIDEODEV_H
-#define __LINUX_VIDEODEV_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/videodev2.h>
-
-#if defined(__MIN_V4L1) && defined (__KERNEL__)
-
-/*
- * Used by those V4L2 core functions that need a minimum V4L1 support,
- * in order to allow V4L1 Compatibilty code compilation.
- */
-
-struct video_mbuf
-{
-	int	size;		/* Total memory to map */
-	int	frames;		/* Frames */
-	int	offsets[VIDEO_MAX_FRAME];
-};
-
-#define VIDIOCGMBUF		_IOR('v',20, struct video_mbuf)		/* Memory map buffer info */
-
-#else
-#if defined(CONFIG_VIDEO_V4L1_COMPAT) || !defined (__KERNEL__)
-
-#define VID_TYPE_CAPTURE	1	/* Can capture */
-#define VID_TYPE_TUNER		2	/* Can tune */
-#define VID_TYPE_TELETEXT	4	/* Does teletext */
-#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
-#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
-#define VID_TYPE_CLIPPING	32	/* Can clip */
-#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
-#define VID_TYPE_SCALES		128	/* Scalable */
-#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
-#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
-#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
-#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
-#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
-#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
-
-struct video_capability
-{
-	char name[32];
-	int type;
-	int channels;	/* Num channels */
-	int audios;	/* Num audio devices */
-	int maxwidth;	/* Supported width */
-	int maxheight;	/* And height */
-	int minwidth;	/* Supported width */
-	int minheight;	/* And height */
-};
-
-
-struct video_channel
-{
-	int channel;
-	char name[32];
-	int tuners;
-	__u32  flags;
-#define VIDEO_VC_TUNER		1	/* Channel has a tuner */
-#define VIDEO_VC_AUDIO		2	/* Channel has audio */
-	__u16  type;
-#define VIDEO_TYPE_TV		1
-#define VIDEO_TYPE_CAMERA	2
-	__u16 norm;			/* Norm set by channel */
-};
-
-struct video_tuner
-{
-	int tuner;
-	char name[32];
-	unsigned long rangelow, rangehigh;	/* Tuner range */
-	__u32 flags;
-#define VIDEO_TUNER_PAL		1
-#define VIDEO_TUNER_NTSC	2
-#define VIDEO_TUNER_SECAM	4
-#define VIDEO_TUNER_LOW		8	/* Uses KHz not MHz */
-#define VIDEO_TUNER_NORM	16	/* Tuner can set norm */
-#define VIDEO_TUNER_STEREO_ON	128	/* Tuner is seeing stereo */
-#define VIDEO_TUNER_RDS_ON      256     /* Tuner is seeing an RDS datastream */
-#define VIDEO_TUNER_MBS_ON      512     /* Tuner is seeing an MBS datastream */
-	__u16 mode;			/* PAL/NTSC/SECAM/OTHER */
-#define VIDEO_MODE_PAL		0
-#define VIDEO_MODE_NTSC		1
-#define VIDEO_MODE_SECAM	2
-#define VIDEO_MODE_AUTO		3
-	__u16 signal;			/* Signal strength 16bit scale */
-};
-
-struct video_picture
-{
-	__u16	brightness;
-	__u16	hue;
-	__u16	colour;
-	__u16	contrast;
-	__u16	whiteness;	/* Black and white only */
-	__u16	depth;		/* Capture depth */
-	__u16   palette;	/* Palette in use */
-#define VIDEO_PALETTE_GREY	1	/* Linear greyscale */
-#define VIDEO_PALETTE_HI240	2	/* High 240 cube (BT848) */
-#define VIDEO_PALETTE_RGB565	3	/* 565 16 bit RGB */
-#define VIDEO_PALETTE_RGB24	4	/* 24bit RGB */
-#define VIDEO_PALETTE_RGB32	5	/* 32bit RGB */
-#define VIDEO_PALETTE_RGB555	6	/* 555 15bit RGB */
-#define VIDEO_PALETTE_YUV422	7	/* YUV422 capture */
-#define VIDEO_PALETTE_YUYV	8
-#define VIDEO_PALETTE_UYVY	9	/* The great thing about standards is ... */
-#define VIDEO_PALETTE_YUV420	10
-#define VIDEO_PALETTE_YUV411	11	/* YUV411 capture */
-#define VIDEO_PALETTE_RAW	12	/* RAW capture (BT848) */
-#define VIDEO_PALETTE_YUV422P	13	/* YUV 4:2:2 Planar */
-#define VIDEO_PALETTE_YUV411P	14	/* YUV 4:1:1 Planar */
-#define VIDEO_PALETTE_YUV420P	15	/* YUV 4:2:0 Planar */
-#define VIDEO_PALETTE_YUV410P	16	/* YUV 4:1:0 Planar */
-#define VIDEO_PALETTE_PLANAR	13	/* start of planar entries */
-#define VIDEO_PALETTE_COMPONENT 7	/* start of component entries */
-};
-
-struct video_audio
-{
-	int	audio;		/* Audio channel */
-	__u16	volume;		/* If settable */
-	__u16	bass, treble;
-	__u32	flags;
-#define VIDEO_AUDIO_MUTE	1
-#define VIDEO_AUDIO_MUTABLE	2
-#define VIDEO_AUDIO_VOLUME	4
-#define VIDEO_AUDIO_BASS	8
-#define VIDEO_AUDIO_TREBLE	16
-#define VIDEO_AUDIO_BALANCE	32
-	char    name[16];
-#define VIDEO_SOUND_MONO	1
-#define VIDEO_SOUND_STEREO	2
-#define VIDEO_SOUND_LANG1	4
-#define VIDEO_SOUND_LANG2	8
-	__u16   mode;
-	__u16	balance;	/* Stereo balance */
-	__u16	step;		/* Step actual volume uses */
-};
-
-struct video_clip
-{
-	__s32	x,y;
-	__s32	width, height;
-	struct	video_clip *next;	/* For user use/driver use only */
-};
-
-struct video_window
-{
-	__u32	x,y;			/* Position of window */
-	__u32	width,height;		/* Its size */
-	__u32	chromakey;
-	__u32	flags;
-	struct	video_clip __user *clips;	/* Set only */
-	int	clipcount;
-#define VIDEO_WINDOW_INTERLACE	1
-#define VIDEO_WINDOW_CHROMAKEY	16	/* Overlay by chromakey */
-#define VIDEO_CLIP_BITMAP	-1
-/* bitmap is 1024x625, a '1' bit represents a clipped pixel */
-#define VIDEO_CLIPMAP_SIZE	(128 * 625)
-};
-
-struct video_capture
-{
-	__u32 	x,y;			/* Offsets into image */
-	__u32	width, height;		/* Area to capture */
-	__u16	decimation;		/* Decimation divider */
-	__u16	flags;			/* Flags for capture */
-#define VIDEO_CAPTURE_ODD		0	/* Temporal */
-#define VIDEO_CAPTURE_EVEN		1
-};
-
-struct video_buffer
-{
-	void	*base;
-	int	height,width;
-	int	depth;
-	int	bytesperline;
-};
-
-struct video_mmap
-{
-	unsigned	int frame;		/* Frame (0 - n) for double buffer */
-	int		height,width;
-	unsigned	int format;		/* should be VIDEO_PALETTE_* */
-};
-
-struct video_key
-{
-	__u8	key[8];
-	__u32	flags;
-};
-
-struct video_mbuf
-{
-	int	size;		/* Total memory to map */
-	int	frames;		/* Frames */
-	int	offsets[VIDEO_MAX_FRAME];
-};
-
-#define 	VIDEO_NO_UNIT	(-1)
-
-struct video_unit
-{
-	int 	video;		/* Video minor */
-	int	vbi;		/* VBI minor */
-	int	radio;		/* Radio minor */
-	int	audio;		/* Audio minor */
-	int	teletext;	/* Teletext minor */
-};
-
-struct vbi_format {
-	__u32	sampling_rate;	/* in Hz */
-	__u32	samples_per_line;
-	__u32	sample_format;	/* VIDEO_PALETTE_RAW only (1 byte) */
-	__s32	start[2];	/* starting line for each frame */
-	__u32	count[2];	/* count of lines for each frame */
-	__u32	flags;
-#define	VBI_UNSYNC	1	/* can distingues between top/bottom field */
-#define	VBI_INTERLACED	2	/* lines are interlaced */
-};
-
-/* video_info is biased towards hardware mpeg encode/decode */
-/* but it could apply generically to any hardware compressor/decompressor */
-struct video_info
-{
-	__u32	frame_count;	/* frames output since decode/encode began */
-	__u32	h_size;		/* current unscaled horizontal size */
-	__u32	v_size;		/* current unscaled veritcal size */
-	__u32	smpte_timecode;	/* current SMPTE timecode (for current GOP) */
-	__u32	picture_type;	/* current picture type */
-	__u32	temporal_reference;	/* current temporal reference */
-	__u8	user_data[256];	/* user data last found in compressed stream */
-	/* user_data[0] contains user data flags, user_data[1] has count */
-};
-
-/* generic structure for setting playback modes */
-struct video_play_mode
-{
-	int	mode;
-	int	p1;
-	int	p2;
-};
-
-/* for loading microcode / fpga programming */
-struct video_code
-{
-	char	loadwhat[16];	/* name or tag of file being passed */
-	int	datasize;
-	__u8	*data;
-};
-
-#define VIDIOCGCAP		_IOR('v',1,struct video_capability)	/* Get capabilities */
-#define VIDIOCGCHAN		_IOWR('v',2,struct video_channel)	/* Get channel info (sources) */
-#define VIDIOCSCHAN		_IOW('v',3,struct video_channel)	/* Set channel 	*/
-#define VIDIOCGTUNER		_IOWR('v',4,struct video_tuner)		/* Get tuner abilities */
-#define VIDIOCSTUNER		_IOW('v',5,struct video_tuner)		/* Tune the tuner for the current channel */
-#define VIDIOCGPICT		_IOR('v',6,struct video_picture)	/* Get picture properties */
-#define VIDIOCSPICT		_IOW('v',7,struct video_picture)	/* Set picture properties */
-#define VIDIOCCAPTURE		_IOW('v',8,int)				/* Start, end capture */
-#define VIDIOCGWIN		_IOR('v',9, struct video_window)	/* Get the video overlay window */
-#define VIDIOCSWIN		_IOW('v',10, struct video_window)	/* Set the video overlay window - passes clip list for hardware smarts , chromakey etc */
-#define VIDIOCGFBUF		_IOR('v',11, struct video_buffer)	/* Get frame buffer */
-#define VIDIOCSFBUF		_IOW('v',12, struct video_buffer)	/* Set frame buffer - root only */
-#define VIDIOCKEY		_IOR('v',13, struct video_key)		/* Video key event - to dev 255 is to all - cuts capture on all DMA windows with this key (0xFFFFFFFF == all) */
-#define VIDIOCGFREQ		_IOR('v',14, unsigned long)		/* Set tuner */
-#define VIDIOCSFREQ		_IOW('v',15, unsigned long)		/* Set tuner */
-#define VIDIOCGAUDIO		_IOR('v',16, struct video_audio)	/* Get audio info */
-#define VIDIOCSAUDIO		_IOW('v',17, struct video_audio)	/* Audio source, mute etc */
-#define VIDIOCSYNC		_IOW('v',18, int)			/* Sync with mmap grabbing */
-#define VIDIOCMCAPTURE		_IOW('v',19, struct video_mmap)		/* Grab frames */
-#define VIDIOCGMBUF		_IOR('v',20, struct video_mbuf)		/* Memory map buffer info */
-#define VIDIOCGUNIT		_IOR('v',21, struct video_unit)		/* Get attached units */
-#define VIDIOCGCAPTURE		_IOR('v',22, struct video_capture)	/* Get subcapture */
-#define VIDIOCSCAPTURE		_IOW('v',23, struct video_capture)	/* Set subcapture */
-#define VIDIOCSPLAYMODE		_IOW('v',24, struct video_play_mode)	/* Set output video mode/feature */
-#define VIDIOCSWRITEMODE	_IOW('v',25, int)			/* Set write mode */
-#define VIDIOCGPLAYINFO		_IOR('v',26, struct video_info)		/* Get current playback info from hardware */
-#define VIDIOCSMICROCODE	_IOW('v',27, struct video_code)		/* Load microcode into hardware */
-#define	VIDIOCGVBIFMT		_IOR('v',28, struct vbi_format)		/* Get VBI information */
-#define	VIDIOCSVBIFMT		_IOW('v',29, struct vbi_format)		/* Set VBI information */
-
-
-#define BASE_VIDIOCPRIVATE	192		/* 192-255 are private */
-
-/* VIDIOCSWRITEMODE */
-#define VID_WRITE_MPEG_AUD		0
-#define VID_WRITE_MPEG_VID		1
-#define VID_WRITE_OSD			2
-#define VID_WRITE_TTX			3
-#define VID_WRITE_CC			4
-#define VID_WRITE_MJPEG			5
-
-/* VIDIOCSPLAYMODE */
-#define VID_PLAY_VID_OUT_MODE		0
-	/* p1: = VIDEO_MODE_PAL, VIDEO_MODE_NTSC, etc ... */
-#define VID_PLAY_GENLOCK		1
-	/* p1: 0 = OFF, 1 = ON */
-	/* p2: GENLOCK FINE DELAY value */
-#define VID_PLAY_NORMAL			2
-#define VID_PLAY_PAUSE			3
-#define VID_PLAY_SINGLE_FRAME		4
-#define VID_PLAY_FAST_FORWARD		5
-#define VID_PLAY_SLOW_MOTION		6
-#define VID_PLAY_IMMEDIATE_NORMAL	7
-#define VID_PLAY_SWITCH_CHANNELS	8
-#define VID_PLAY_FREEZE_FRAME		9
-#define VID_PLAY_STILL_MODE		10
-#define VID_PLAY_MASTER_MODE		11
-	/* p1: see below */
-#define		VID_PLAY_MASTER_NONE	1
-#define		VID_PLAY_MASTER_VIDEO	2
-#define		VID_PLAY_MASTER_AUDIO	3
-#define VID_PLAY_ACTIVE_SCANLINES	12
-	/* p1 = first active; p2 = last active */
-#define VID_PLAY_RESET			13
-#define VID_PLAY_END_MARK		14
-
-#endif /* CONFIG_VIDEO_V4L1_COMPAT */
-#endif /* __MIN_V4L1 */
-
-#endif /* __LINUX_VIDEODEV_H */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/include/media/bt819.h b/include/media/bt819.h
index 38f666bde77a..8025f4bc2bb6 100644
--- a/include/media/bt819.h
+++ b/include/media/bt819.h
@@ -26,7 +26,10 @@
 /* v4l2_device notifications. */
 
 /* Needed to reset the FIFO buffer when changing the input
-   or the video standard. */
+   or the video standard.
+
+   Note: these ioctls that internal to the kernel and are never called
+   from userspace. */
 #define BT819_FIFO_RESET_LOW 	_IO('b', 0)
 #define BT819_FIFO_RESET_HIGH 	_IO('b', 1)
 
diff --git a/include/media/cx2341x.h b/include/media/cx2341x.h
index 8d08ebfe20b7..9635eebaab09 100644
--- a/include/media/cx2341x.h
+++ b/include/media/cx2341x.h
@@ -95,7 +95,7 @@ int cx2341x_update(void *priv, cx2341x_mbox_func func,
 		const struct cx2341x_mpeg_params *new);
 int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
 		struct v4l2_queryctrl *qctrl);
-const char **cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id);
+const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id);
 int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
 		struct v4l2_ext_controls *ctrls, unsigned int cmd);
 void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p);
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
deleted file mode 100644
index 528050e39ad9..000000000000
--- a/include/media/ir-common.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- *
- * some common structs and functions to handle infrared remotes via
- * input layer ...
- *
- * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _IR_COMMON
-#define _IR_COMMON
-
-#include <linux/input.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <media/ir-core.h>
-
-#define RC5_START(x)	(((x)>>12)&3)
-#define RC5_TOGGLE(x)	(((x)>>11)&1)
-#define RC5_ADDR(x)	(((x)>>6)&31)
-#define RC5_INSTR(x)	((x)&63)
-
-struct ir_input_state {
-	/* configuration */
-	u64      ir_type;
-
-	/* key info */
-	u32                ir_key;      /* ir scancode */
-	u32                keycode;     /* linux key code */
-	int                keypressed;  /* current state */
-};
-
-/* this was saa7134_ir and bttv_ir, moved here for
- * rc5 decoding. */
-struct card_ir {
-	struct input_dev        *dev;
-	struct ir_input_state   ir;
-	char                    name[32];
-	char                    phys[32];
-	int			users;
-
-	u32			running:1;
-	struct ir_dev_props	props;
-
-	/* Usual gpio signalling */
-
-	u32                     mask_keycode;
-	u32                     mask_keydown;
-	u32                     mask_keyup;
-	u32                     polling;
-	u32                     last_gpio;
-	int			shift_by;
-	int			start; // What should RC5_START() be
-	int			addr; // What RC5_ADDR() should be.
-	int			rc5_key_timeout;
-	int			rc5_remote_gap;
-	struct work_struct      work;
-	struct timer_list       timer;
-
-	/* RC5 gpio */
-	u32 rc5_gpio;
-	struct timer_list timer_end;	/* timer_end for code completion */
-	struct timer_list timer_keyup;	/* timer_end for key release */
-	u32 last_rc5;			/* last good rc5 code */
-	u32 last_bit;			/* last raw bit seen */
-	u32 code;			/* raw code under construction */
-	struct timeval base_time;	/* time of last seen code */
-	int active;			/* building raw code */
-
-	/* NEC decoding */
-	u32			nec_gpio;
-	struct tasklet_struct   tlet;
-
-	/* IR core raw decoding */
-	u32			raw_decode;
-};
-
-/* Routines from ir-functions.c */
-
-int ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
-		   const u64 ir_type);
-void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir);
-void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
-		      u32 ir_key);
-u32  ir_extract_bits(u32 data, u32 mask);
-int  ir_dump_samples(u32 *samples, int count);
-int  ir_decode_biphase(u32 *samples, int count, int low, int high);
-int  ir_decode_pulsedistance(u32 *samples, int count, int low, int high);
-u32  ir_rc5_decode(unsigned int code);
-
-void ir_rc5_timer_end(unsigned long data);
-void ir_rc5_timer_keyup(unsigned long data);
-
-#endif
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
deleted file mode 100644
index 6dc37fae6606..000000000000
--- a/include/media/ir-core.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Remote Controller core header
- *
- * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#ifndef _IR_CORE
-#define _IR_CORE
-
-#include <linux/spinlock.h>
-#include <linux/kfifo.h>
-#include <linux/time.h>
-#include <linux/timer.h>
-#include <media/rc-map.h>
-
-extern int ir_core_debug;
-#define IR_dprintk(level, fmt, arg...)	if (ir_core_debug >= level) \
-	printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
-
-enum rc_driver_type {
-	RC_DRIVER_SCANCODE = 0,	/* Driver or hardware generates a scancode */
-	RC_DRIVER_IR_RAW,	/* Needs a Infra-Red pulse/space decoder */
-};
-
-/**
- * struct ir_dev_props - Allow caller drivers to set special properties
- * @driver_type: specifies if the driver or hardware have already a decoder,
- *	or if it needs to use the IR raw event decoders to produce a scancode
- * @allowed_protos: bitmask with the supported IR_TYPE_* protocols
- * @scanmask: some hardware decoders are not capable of providing the full
- *	scancode to the application. As this is a hardware limit, we can't do
- *	anything with it. Yet, as the same keycode table can be used with other
- *	devices, a mask is provided to allow its usage. Drivers should generally
- *	leave this field in blank
- * @timeout: optional time after which device stops sending data
- * @min_timeout: minimum timeout supported by device
- * @max_timeout: maximum timeout supported by device
- * @rx_resolution : resolution (in ns) of input sampler
- * @tx_resolution: resolution (in ns) of output sampler
- * @priv: driver-specific data, to be used on the callbacks
- * @change_protocol: allow changing the protocol used on hardware decoders
- * @open: callback to allow drivers to enable polling/irq when IR input device
- *	is opened.
- * @close: callback to allow drivers to disable polling/irq when IR input device
- *	is opened.
- * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
- * @s_tx_carrier: set transmit carrier frequency
- * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
- * @s_rx_carrier: inform driver about carrier it is expected to handle
- * @tx_ir: transmit IR
- * @s_idle: optional: enable/disable hardware idle mode, upon which,
-	device doesn't interrupt host until it sees IR pulses
- * @s_learning_mode: enable wide band receiver used for learning
- * @s_carrier_report: enable carrier reports
- */
-struct ir_dev_props {
-	enum rc_driver_type	driver_type;
-	unsigned long		allowed_protos;
-	u32			scanmask;
-
-	u32			timeout;
-	u32			min_timeout;
-	u32			max_timeout;
-
-	u32			rx_resolution;
-	u32			tx_resolution;
-
-	void			*priv;
-	int			(*change_protocol)(void *priv, u64 ir_type);
-	int			(*open)(void *priv);
-	void			(*close)(void *priv);
-	int			(*s_tx_mask)(void *priv, u32 mask);
-	int			(*s_tx_carrier)(void *priv, u32 carrier);
-	int			(*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
-	int			(*s_rx_carrier_range)(void *priv, u32 min, u32 max);
-	int			(*tx_ir)(void *priv, int *txbuf, u32 n);
-	void			(*s_idle)(void *priv, bool enable);
-	int			(*s_learning_mode)(void *priv, int enable);
-	int			(*s_carrier_report) (void *priv, int enable);
-};
-
-struct ir_input_dev {
-	struct device			dev;		/* device */
-	char				*driver_name;	/* Name of the driver module */
-	struct ir_scancode_table	rc_tab;		/* scan/key table */
-	unsigned long			devno;		/* device number */
-	struct ir_dev_props		*props;		/* Device properties */
-	struct ir_raw_event_ctrl	*raw;		/* for raw pulse/space events */
-	struct input_dev		*input_dev;	/* the input device associated with this device */
-	bool				idle;
-
-	/* key info - needed by IR keycode handlers */
-	spinlock_t			keylock;	/* protects the below members */
-	bool				keypressed;	/* current state */
-	unsigned long			keyup_jiffies;	/* when should the current keypress be released? */
-	struct timer_list		timer_keyup;	/* timer for releasing a keypress */
-	u32				last_keycode;	/* keycode of last command */
-	u32				last_scancode;	/* scancode of last command */
-	u8				last_toggle;	/* toggle of last command */
-};
-
-enum raw_event_type {
-	IR_SPACE        = (1 << 0),
-	IR_PULSE        = (1 << 1),
-	IR_START_EVENT  = (1 << 2),
-	IR_STOP_EVENT   = (1 << 3),
-};
-
-#define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr)
-
-/* From ir-keytable.c */
-int __ir_input_register(struct input_dev *dev,
-		      const struct ir_scancode_table *ir_codes,
-		      struct ir_dev_props *props,
-		      const char *driver_name);
-
-static inline int ir_input_register(struct input_dev *dev,
-		      const char *map_name,
-		      struct ir_dev_props *props,
-		      const char *driver_name) {
-	struct ir_scancode_table *ir_codes;
-	struct ir_input_dev *ir_dev;
-	int rc;
-
-	if (!map_name)
-		return -EINVAL;
-
-	ir_codes = get_rc_map(map_name);
-	if (!ir_codes) {
-		ir_codes = get_rc_map(RC_MAP_EMPTY);
-
-		if (!ir_codes)
-			return -EINVAL;
-	}
-
-	rc = __ir_input_register(dev, ir_codes, props, driver_name);
-	if (rc < 0)
-		return -EINVAL;
-
-	ir_dev = input_get_drvdata(dev);
-
-	if (!rc && ir_dev->props && ir_dev->props->change_protocol)
-		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
-						    ir_codes->ir_type);
-
-	return rc;
-}
-
-void ir_input_unregister(struct input_dev *input_dev);
-
-void ir_repeat(struct input_dev *dev);
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle);
-void ir_keyup(struct ir_input_dev *ir);
-u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode);
-
-/* From ir-raw-event.c */
-
-struct ir_raw_event {
-	union {
-		u32             duration;
-
-		struct {
-			u32     carrier;
-			u8      duty_cycle;
-		};
-	};
-
-	unsigned                pulse:1;
-	unsigned                reset:1;
-	unsigned                timeout:1;
-	unsigned                carrier_report:1;
-};
-
-#define DEFINE_IR_RAW_EVENT(event) \
-	struct ir_raw_event event = { \
-		{ .duration = 0 } , \
-		.pulse = 0, \
-		.reset = 0, \
-		.timeout = 0, \
-		.carrier_report = 0 }
-
-static inline void init_ir_raw_event(struct ir_raw_event *ev)
-{
-	memset(ev, 0, sizeof(*ev));
-}
-
-#define IR_MAX_DURATION         0xFFFFFFFF      /* a bit more than 4 seconds */
-
-void ir_raw_event_handle(struct input_dev *input_dev);
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
-				struct ir_raw_event *ev);
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle);
-
-static inline void ir_raw_event_reset(struct input_dev *input_dev)
-{
-	DEFINE_IR_RAW_EVENT(ev);
-	ev.reset = true;
-
-	ir_raw_event_store(input_dev, &ev);
-	ir_raw_event_handle(input_dev);
-}
-
-#endif /* _IR_CORE */
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index 557c676ab7dc..768aa77925cd 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -1,7 +1,7 @@
 #ifndef _IR_I2C
 #define _IR_I2C
 
-#include <media/ir-common.h>
+#include <media/rc-core.h>
 
 #define DEFAULT_POLLING_INTERVAL	100	/* ms */
 
@@ -9,11 +9,9 @@ struct IR_i2c;
 
 struct IR_i2c {
 	char		       *ir_codes;
-
 	struct i2c_client      *c;
-	struct input_dev       *input;
-	struct ir_input_state  ir;
-	u64                    ir_type;
+	struct rc_dev          *rc;
+
 	/* Used to avoid fast repeating */
 	unsigned char          old;
 
@@ -39,13 +37,16 @@ enum ir_kbd_get_key_fn {
 struct IR_i2c_init_data {
 	char			*ir_codes;
 	const char		*name;
-	u64			type; /* IR_TYPE_RC5, etc */
+	u64			type; /* RC_TYPE_RC5, etc */
 	u32			polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */
+
 	/*
 	 * Specify either a function pointer or a value indicating one of
 	 * ir_kbd_i2c's internal get_key functions
 	 */
 	int                    (*get_key)(struct IR_i2c*, u32*, u32*);
 	enum ir_kbd_get_key_fn internal_get_key_func;
+
+	struct rc_dev		*rc_dev;
 };
 #endif
diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h
index 54780a560d0e..630e702c9511 100644
--- a/include/media/lirc_dev.h
+++ b/include/media/lirc_dev.h
@@ -217,9 +217,9 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file);
 int lirc_dev_fop_close(struct inode *inode, struct file *file);
 unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait);
 long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-ssize_t lirc_dev_fop_read(struct file *file, char *buffer, size_t length,
+ssize_t lirc_dev_fop_read(struct file *file, char __user *buffer, size_t length,
 			  loff_t *ppos);
-ssize_t lirc_dev_fop_write(struct file *file, const char *buffer, size_t length,
-			   loff_t *ppos);
+ssize_t lirc_dev_fop_write(struct file *file, const char __user *buffer,
+			   size_t length, loff_t *ppos);
 
 #endif
diff --git a/include/media/ovcamchip.h b/include/media/ovcamchip.h
deleted file mode 100644
index 05b9569ef1c8..000000000000
--- a/include/media/ovcamchip.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* OmniVision* camera chip driver API
- *
- * Copyright (c) 1999-2004 Mark McClelland
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- *
- * * OmniVision is a trademark of OmniVision Technologies, Inc. This driver
- * is not sponsored or developed by them.
- */
-
-#ifndef __LINUX_OVCAMCHIP_H
-#define __LINUX_OVCAMCHIP_H
-
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-
-/* --------------------------------- */
-/*           ENUMERATIONS            */
-/* --------------------------------- */
-
-/* Controls */
-enum {
-	OVCAMCHIP_CID_CONT,		/* Contrast */
-	OVCAMCHIP_CID_BRIGHT,		/* Brightness */
-	OVCAMCHIP_CID_SAT,		/* Saturation */
-	OVCAMCHIP_CID_HUE,		/* Hue */
-	OVCAMCHIP_CID_EXP,		/* Exposure */
-	OVCAMCHIP_CID_FREQ,		/* Light frequency */
-	OVCAMCHIP_CID_BANDFILT,		/* Banding filter */
-	OVCAMCHIP_CID_AUTOBRIGHT,	/* Auto brightness */
-	OVCAMCHIP_CID_AUTOEXP,		/* Auto exposure */
-	OVCAMCHIP_CID_BACKLIGHT,	/* Back light compensation */
-	OVCAMCHIP_CID_MIRROR,		/* Mirror horizontally */
-};
-
-/* Chip types */
-#define NUM_CC_TYPES	9
-enum {
-	CC_UNKNOWN,
-	CC_OV76BE,
-	CC_OV7610,
-	CC_OV7620,
-	CC_OV7620AE,
-	CC_OV6620,
-	CC_OV6630,
-	CC_OV6630AE,
-	CC_OV6630AF,
-};
-
-/* --------------------------------- */
-/*           I2C ADDRESSES           */
-/* --------------------------------- */
-
-#define OV7xx0_SID   (0x42 >> 1)
-#define OV6xx0_SID   (0xC0 >> 1)
-
-/* --------------------------------- */
-/*                API                */
-/* --------------------------------- */
-
-struct ovcamchip_control {
-	__u32 id;
-	__s32 value;
-};
-
-struct ovcamchip_window {
-	int x;
-	int y;
-	int width;
-	int height;
-	int format;
-	int quarter;		/* Scale width and height down 2x */
-
-	/* This stuff will be removed eventually */
-	int clockdiv;		/* Clock divisor setting */
-};
-
-/* Commands */
-#define OVCAMCHIP_CMD_Q_SUBTYPE     _IOR  (0x88, 0x00, int)
-#define OVCAMCHIP_CMD_INITIALIZE    _IOW  (0x88, 0x01, int)
-/* You must call OVCAMCHIP_CMD_INITIALIZE before any of commands below! */
-#define OVCAMCHIP_CMD_S_CTRL        _IOW  (0x88, 0x02, struct ovcamchip_control)
-#define OVCAMCHIP_CMD_G_CTRL        _IOWR (0x88, 0x03, struct ovcamchip_control)
-#define OVCAMCHIP_CMD_S_MODE        _IOW  (0x88, 0x04, struct ovcamchip_window)
-#define OVCAMCHIP_MAX_CMD           _IO   (0x88, 0x3f)
-
-#endif
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
new file mode 100644
index 000000000000..a23c1fc685a1
--- /dev/null
+++ b/include/media/rc-core.h
@@ -0,0 +1,220 @@
+/*
+ * Remote Controller core header
+ *
+ * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _RC_CORE
+#define _RC_CORE
+
+#include <linux/spinlock.h>
+#include <linux/kfifo.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <media/rc-map.h>
+
+extern int rc_core_debug;
+#define IR_dprintk(level, fmt, arg...)	if (rc_core_debug >= level) \
+	printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
+
+enum rc_driver_type {
+	RC_DRIVER_SCANCODE = 0,	/* Driver or hardware generates a scancode */
+	RC_DRIVER_IR_RAW,	/* Needs a Infra-Red pulse/space decoder */
+};
+
+/**
+ * struct rc_dev - represents a remote control device
+ * @dev: driver model's view of this device
+ * @input_name: name of the input child device
+ * @input_phys: physical path to the input child device
+ * @input_id: id of the input child device (struct input_id)
+ * @driver_name: name of the hardware driver which registered this device
+ * @map_name: name of the default keymap
+ * @rc_map: current scan/key table
+ * @devno: unique remote control device number
+ * @raw: additional data for raw pulse/space devices
+ * @input_dev: the input child device used to communicate events to userspace
+ * @driver_type: specifies if protocol decoding is done in hardware or software 
+ * @idle: used to keep track of RX state
+ * @allowed_protos: bitmask with the supported RC_TYPE_* protocols
+ * @scanmask: some hardware decoders are not capable of providing the full
+ *	scancode to the application. As this is a hardware limit, we can't do
+ *	anything with it. Yet, as the same keycode table can be used with other
+ *	devices, a mask is provided to allow its usage. Drivers should generally
+ *	leave this field in blank
+ * @priv: driver-specific data
+ * @keylock: protects the remaining members of the struct
+ * @keypressed: whether a key is currently pressed
+ * @keyup_jiffies: time (in jiffies) when the current keypress should be released
+ * @timer_keyup: timer for releasing a keypress
+ * @last_keycode: keycode of last keypress
+ * @last_scancode: scancode of last keypress
+ * @last_toggle: toggle value of last command
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
+ * @rx_resolution : resolution (in ns) of input sampler
+ * @tx_resolution: resolution (in ns) of output sampler
+ * @change_protocol: allow changing the protocol used on hardware decoders
+ * @open: callback to allow drivers to enable polling/irq when IR input device
+ *	is opened.
+ * @close: callback to allow drivers to disable polling/irq when IR input device
+ *	is opened.
+ * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
+ * @s_tx_carrier: set transmit carrier frequency
+ * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
+ * @s_rx_carrier: inform driver about carrier it is expected to handle
+ * @tx_ir: transmit IR
+ * @s_idle: enable/disable hardware idle mode, upon which,
+ *	device doesn't interrupt host until it sees IR pulses
+ * @s_learning_mode: enable wide band receiver used for learning
+ * @s_carrier_report: enable carrier reports
+ */
+struct rc_dev {
+	struct device			dev;
+	const char			*input_name;
+	const char			*input_phys;
+	struct input_id			input_id;
+	char				*driver_name;
+	const char			*map_name;
+	struct rc_map	rc_map;
+	unsigned long			devno;
+	struct ir_raw_event_ctrl	*raw;
+	struct input_dev		*input_dev;
+	enum rc_driver_type		driver_type;
+	bool				idle;
+	u64				allowed_protos;
+	u32				scanmask;
+	void				*priv;
+	spinlock_t			keylock;
+	bool				keypressed;
+	unsigned long			keyup_jiffies;
+	struct timer_list		timer_keyup;
+	u32				last_keycode;
+	u32				last_scancode;
+	u8				last_toggle;
+	u32				timeout;
+	u32				min_timeout;
+	u32				max_timeout;
+	u32				rx_resolution;
+	u32				tx_resolution;
+	int				(*change_protocol)(struct rc_dev *dev, u64 rc_type);
+	int				(*open)(struct rc_dev *dev);
+	void				(*close)(struct rc_dev *dev);
+	int				(*s_tx_mask)(struct rc_dev *dev, u32 mask);
+	int				(*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
+	int				(*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
+	int				(*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
+	int				(*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n);
+	void				(*s_idle)(struct rc_dev *dev, bool enable);
+	int				(*s_learning_mode)(struct rc_dev *dev, int enable);
+	int				(*s_carrier_report) (struct rc_dev *dev, int enable);
+};
+
+#define to_rc_dev(d) container_of(d, struct rc_dev, dev)
+
+/*
+ * From rc-main.c
+ * Those functions can be used on any type of Remote Controller. They
+ * basically creates an input_dev and properly reports the device as a
+ * Remote Controller, at sys/class/rc.
+ */
+
+struct rc_dev *rc_allocate_device(void);
+void rc_free_device(struct rc_dev *dev);
+int rc_register_device(struct rc_dev *dev);
+void rc_unregister_device(struct rc_dev *dev);
+
+void rc_repeat(struct rc_dev *dev);
+void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keyup(struct rc_dev *dev);
+u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
+
+/*
+ * From rc-raw.c
+ * The Raw interface is specific to InfraRed. It may be a good idea to
+ * split it later into a separate header.
+ */
+
+enum raw_event_type {
+	IR_SPACE        = (1 << 0),
+	IR_PULSE        = (1 << 1),
+	IR_START_EVENT  = (1 << 2),
+	IR_STOP_EVENT   = (1 << 3),
+};
+
+struct ir_raw_event {
+	union {
+		u32             duration;
+
+		struct {
+			u32     carrier;
+			u8      duty_cycle;
+		};
+	};
+
+	unsigned                pulse:1;
+	unsigned                reset:1;
+	unsigned                timeout:1;
+	unsigned                carrier_report:1;
+};
+
+#define DEFINE_IR_RAW_EVENT(event) \
+	struct ir_raw_event event = { \
+		{ .duration = 0 } , \
+		.pulse = 0, \
+		.reset = 0, \
+		.timeout = 0, \
+		.carrier_report = 0 }
+
+static inline void init_ir_raw_event(struct ir_raw_event *ev)
+{
+	memset(ev, 0, sizeof(*ev));
+}
+
+#define IR_MAX_DURATION         0xFFFFFFFF      /* a bit more than 4 seconds */
+
+void ir_raw_event_handle(struct rc_dev *dev);
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct rc_dev *dev,
+				struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
+
+static inline void ir_raw_event_reset(struct rc_dev *dev)
+{
+	DEFINE_IR_RAW_EVENT(ev);
+	ev.reset = true;
+
+	ir_raw_event_store(dev, &ev);
+	ir_raw_event_handle(dev);
+}
+
+/* extract mask bits out of data and pack them into the result */
+static inline u32 ir_extract_bits(u32 data, u32 mask)
+{
+	u32 vbit = 1, value = 0;
+
+	do {
+		if (mask & 1) {
+			if (data & 1)
+				value |= vbit;
+			vbit <<= 1;
+		}
+		data >>= 1;
+	} while (mask >>= 1);
+
+	return value;
+}
+
+#endif /* _RC_CORE */
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index e0f17edf38ed..ee9e2f747c76 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -11,45 +11,45 @@
 
 #include <linux/input.h>
 
-#define IR_TYPE_UNKNOWN	0
-#define IR_TYPE_RC5	(1  << 0)	/* Philips RC5 protocol */
-#define IR_TYPE_NEC	(1  << 1)
-#define IR_TYPE_RC6	(1  << 2)	/* Philips RC6 protocol */
-#define IR_TYPE_JVC	(1  << 3)	/* JVC protocol */
-#define IR_TYPE_SONY	(1  << 4)	/* Sony12/15/20 protocol */
-#define IR_TYPE_RC5_SZ	(1  << 5)	/* RC5 variant used by Streamzap */
-#define IR_TYPE_LIRC	(1  << 30)	/* Pass raw IR to lirc userspace */
-#define IR_TYPE_OTHER	(1u << 31)
+#define RC_TYPE_UNKNOWN	0
+#define RC_TYPE_RC5	(1  << 0)	/* Philips RC5 protocol */
+#define RC_TYPE_NEC	(1  << 1)
+#define RC_TYPE_RC6	(1  << 2)	/* Philips RC6 protocol */
+#define RC_TYPE_JVC	(1  << 3)	/* JVC protocol */
+#define RC_TYPE_SONY	(1  << 4)	/* Sony12/15/20 protocol */
+#define RC_TYPE_RC5_SZ	(1  << 5)	/* RC5 variant used by Streamzap */
+#define RC_TYPE_LIRC	(1  << 30)	/* Pass raw IR to lirc userspace */
+#define RC_TYPE_OTHER	(1u << 31)
 
-#define IR_TYPE_ALL (IR_TYPE_RC5 | IR_TYPE_NEC  | IR_TYPE_RC6  | \
-		     IR_TYPE_JVC | IR_TYPE_SONY | IR_TYPE_LIRC | \
-		     IR_TYPE_RC5_SZ | IR_TYPE_OTHER)
+#define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC  | RC_TYPE_RC6  | \
+		     RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \
+		     RC_TYPE_RC5_SZ | RC_TYPE_OTHER)
 
-struct ir_scancode {
+struct rc_map_table {
 	u32	scancode;
 	u32	keycode;
 };
 
-struct ir_scancode_table {
-	struct ir_scancode	*scan;
+struct rc_map {
+	struct rc_map_table	*scan;
 	unsigned int		size;	/* Max number of entries */
 	unsigned int		len;	/* Used number of entries */
 	unsigned int		alloc;	/* Size of *scan in bytes */
-	u64			ir_type;
+	u64			rc_type;
 	const char		*name;
 	spinlock_t		lock;
 };
 
-struct rc_keymap {
+struct rc_map_list {
 	struct list_head	 list;
-	struct ir_scancode_table map;
+	struct rc_map map;
 };
 
 /* Routines from rc-map.c */
 
-int ir_register_map(struct rc_keymap *map);
-void ir_unregister_map(struct rc_keymap *map);
-struct ir_scancode_table *get_rc_map(const char *name);
+int rc_map_register(struct rc_map_list *map);
+void rc_map_unregister(struct rc_map_list *map);
+struct rc_map *rc_map_get(const char *name);
 void rc_map_init(void);
 
 /* Names of the several keytables defined in-kernel */
@@ -119,6 +119,7 @@ void rc_map_init(void);
 #define RC_MAP_PINNACLE_PCTV_HD          "rc-pinnacle-pctv-hd"
 #define RC_MAP_PIXELVIEW_NEW             "rc-pixelview-new"
 #define RC_MAP_PIXELVIEW                 "rc-pixelview"
+#define RC_MAP_PIXELVIEW_002T		 "rc-pixelview-002t"
 #define RC_MAP_PIXELVIEW_MK12            "rc-pixelview-mk12"
 #define RC_MAP_POWERCOLOR_REAL_ANGEL     "rc-powercolor-real-angel"
 #define RC_MAP_PROTEUS_2309              "rc-proteus-2309"
@@ -137,6 +138,7 @@ void rc_map_init(void);
 #define RC_MAP_TREKSTOR                  "rc-trekstor"
 #define RC_MAP_TT_1500                   "rc-tt-1500"
 #define RC_MAP_TWINHAN_VP1027_DVBS       "rc-twinhan1027"
+#define RC_MAP_VIDEOMATE_M1F             "rc-videomate-m1f"
 #define RC_MAP_VIDEOMATE_S350            "rc-videomate-s350"
 #define RC_MAP_VIDEOMATE_TV_PVR          "rc-videomate-tv-pvr"
 #define RC_MAP_WINFAST                   "rc-winfast"
diff --git a/include/media/rds.h b/include/media/saa6588.h
index a89426667618..2c3c4420a4eb 100644
--- a/include/media/rds.h
+++ b/include/media/saa6588.h
@@ -4,9 +4,6 @@
     saa6588.c and every driver (e.g. bttv-driver.c) that wants
     to use the saa6588 module.
 
-    Instead of having a separate rds.h, I'd prefer to include
-    this stuff in one of the already existing files like tuner.h
-
     (c) 2005 by Hans J. Koch
 
     This program is free software; you can redistribute it and/or modify
@@ -25,10 +22,10 @@
 
 */
 
-#ifndef _RDS_H
-#define _RDS_H
+#ifndef _SAA6588_H
+#define _SAA6588_H
 
-struct rds_command {
+struct saa6588_command {
 	unsigned int  block_count;
 	int           result;
 	unsigned char __user *buffer;
@@ -36,9 +33,10 @@ struct rds_command {
 	poll_table    *event_list;
 };
 
-#define RDS_CMD_OPEN	_IOW('R',1,int)
-#define RDS_CMD_CLOSE	_IOW('R',2,int)
-#define RDS_CMD_READ	_IOR('R',3,int)
-#define RDS_CMD_POLL	_IOR('R',4,int)
+/* These ioctls are internal to the kernel */
+#define SAA6588_CMD_OPEN	_IOW('R', 1, int)
+#define SAA6588_CMD_CLOSE	_IOW('R', 2, int)
+#define SAA6588_CMD_READ	_IOR('R', 3, int)
+#define SAA6588_CMD_POLL	_IOR('R', 4, int)
 
 #endif
diff --git a/include/media/si4713.h b/include/media/si4713.h
index 99850a54ed09..ed7353e8a982 100644
--- a/include/media/si4713.h
+++ b/include/media/si4713.h
@@ -23,8 +23,7 @@
  * Platform dependent definition
  */
 struct si4713_platform_data {
-	/* Set power state, zero is off, non-zero is on. */
-	int (*set_power)(int power);
+	int gpio_reset; /* < 0 if not used */
 };
 
 /*
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 86e3631764ef..9386db829fb7 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -97,6 +97,7 @@ struct soc_camera_host_ops {
 #define SOCAM_SENSOR_INVERT_DATA	(1 << 4)
 
 struct i2c_board_info;
+struct regulator_bulk_data;
 
 struct soc_camera_link {
 	/* Camera bus id, used to match a camera and a bus */
@@ -108,6 +109,10 @@ struct soc_camera_link {
 	const char *module_name;
 	void *priv;
 
+	/* Optional regulators that have to be managed on power on/off events */
+	struct regulator_bulk_data *regulators;
+	int num_regulators;
+
 	/*
 	 * For non-I2C devices platform platform has to provide methods to
 	 * add a device to the system and to remove
diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h
index fcd32a3696ba..a59a84854dc1 100644
--- a/include/media/timb_radio.h
+++ b/include/media/timb_radio.h
@@ -24,7 +24,6 @@
 struct timb_radio_platform_data {
 	int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */
 	struct {
-		const char *module_name;
 		struct i2c_board_info *info;
 	} tuner;
 	struct {
diff --git a/include/media/timb_video.h b/include/media/timb_video.h
new file mode 100644
index 000000000000..70ae43970a49
--- /dev/null
+++ b/include/media/timb_video.h
@@ -0,0 +1,33 @@
+/*
+ * timb_video.h Platform struct for the Timberdale video driver
+ * Copyright (c) 2009-2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _TIMB_VIDEO_
+#define _TIMB_VIDEO_ 1
+
+#include <linux/i2c.h>
+
+struct timb_video_platform_data {
+	int dma_channel;
+	int i2c_adapter; /* The I2C adapter where the encoder is attached */
+	struct {
+		const char *module_name;
+		struct i2c_board_info *info;
+	} encoder;
+};
+
+#endif
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 51e89f2267b8..44fe44ec9ea7 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -74,6 +74,7 @@ enum {
 	V4L2_IDENT_SOI968 = 256,
 	V4L2_IDENT_OV9640 = 257,
 	V4L2_IDENT_OV6650 = 258,
+	V4L2_IDENT_OV2640 = 259,
 
 	/* module saa7146: reserved range 300-309 */
 	V4L2_IDENT_SAA7146 = 300,
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 239125af3ea3..2d65b35cdab2 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -98,12 +98,12 @@ int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority local);
 /* Control helper functions */
 
 int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
-		const char **menu_items);
+		const char * const *menu_items);
 const char *v4l2_ctrl_get_name(u32 id);
-const char **v4l2_ctrl_get_menu(u32 id);
+const char * const *v4l2_ctrl_get_menu(u32 id);
 int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def);
 int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu,
-		struct v4l2_queryctrl *qctrl, const char **menu_items);
+		struct v4l2_queryctrl *qctrl, const char * const *menu_items);
 #define V4L2_CTRL_MENU_IDS_END (0xffffffff)
 int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids);
 
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 9b7bea928a88..d69ab4aae032 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -112,7 +112,7 @@ struct v4l2_ctrl {
 		u32 step;
 		u32 menu_skip_mask;
 	};
-	const char **qmenu;
+	const char * const *qmenu;
 	unsigned long flags;
 	union {
 		s32 val;
@@ -202,7 +202,7 @@ struct v4l2_ctrl_config {
 	s32 def;
 	u32 flags;
 	u32 menu_skip_mask;
-	const char **qmenu;
+	const char * const *qmenu;
 	unsigned int is_private:1;
 	unsigned int is_volatile:1;
 };
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
index 06daa6e8e051..67df37542c68 100644
--- a/include/media/v4l2-ioctl.h
+++ b/include/media/v4l2-ioctl.h
@@ -14,12 +14,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/compiler.h> /* need __user */
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#define __MIN_V4L1
-#include <linux/videodev.h>
-#else
 #include <linux/videodev2.h>
-#endif
 
 struct v4l2_fh;
 
@@ -113,10 +108,6 @@ struct v4l2_ioctl_ops {
 
 
 	int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-			/* buffer type is struct vidio_mbuf * */
-	int (*vidiocgmbuf)  (struct file *file, void *fh, struct video_mbuf *p);
-#endif
 	int (*vidioc_g_fbuf)   (struct file *file, void *fh,
 				struct v4l2_framebuffer *a);
 	int (*vidioc_s_fbuf)   (struct file *file, void *fh,
@@ -300,22 +291,15 @@ extern void v4l_printk_ioctl(unsigned int cmd);
 extern const char *v4l2_field_names[];
 extern const char *v4l2_type_names[];
 
-/*  Compatibility layer interface  --  v4l1-compat module */
-typedef long (*v4l2_kioctl)(struct file *file,
-			   unsigned int cmd, void *arg);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-long v4l_compat_translate_ioctl(struct file *file,
-			       int cmd, void *arg, v4l2_kioctl driver_ioctl);
-#else
-#define v4l_compat_translate_ioctl(file, cmd, arg, ioctl) (-EINVAL)
-#endif
-
 #ifdef CONFIG_COMPAT
 /* 32 Bits compatibility layer for 64 bits processors */
 extern long v4l2_compat_ioctl32(struct file *file, unsigned int cmd,
 				unsigned long arg);
 #endif
 
+typedef long (*v4l2_kioctl)(struct file *file,
+		unsigned int cmd, void *arg);
+
 /* Include support for obsoleted stuff */
 extern long video_usercopy(struct file *file, unsigned int cmd,
 				unsigned long arg, v4l2_kioctl func);
diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h
index 1d3835fc26be..90ed895e217d 100644
--- a/include/media/videobuf-core.h
+++ b/include/media/videobuf-core.h
@@ -17,10 +17,6 @@
 #define _VIDEOBUF_CORE_H
 
 #include <linux/poll.h>
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#define __MIN_V4L1
-#include <linux/videodev.h>
-#endif
 #include <linux/videodev2.h>
 
 #define UNSET (-1U)
@@ -212,10 +208,6 @@ int videobuf_qbuf(struct videobuf_queue *q,
 		  struct v4l2_buffer *b);
 int videobuf_dqbuf(struct videobuf_queue *q,
 		   struct v4l2_buffer *b, int nonblocking);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-int videobuf_cgmbuf(struct videobuf_queue *q,
-		    struct video_mbuf *mbuf, int count);
-#endif
 int videobuf_streamon(struct videobuf_queue *q);
 int videobuf_streamoff(struct videobuf_queue *q);