diff options
| author | Linus Torvalds | 2021-04-28 09:24:36 -0700 |
|---|---|---|
| committer | Linus Torvalds | 2021-04-28 09:24:36 -0700 |
| commit | 3aa139aa9fdc138a84243dc49dc18d9b40e1c6e4 (patch) | |
| tree | 5f533d8f1c48f0e8bc02b4f8079ed9ffdc14ebc1 /include | |
| parent | acd3d28594536e9096c1ea76c5867d8a68babef6 (diff) | |
| parent | 0b276e470a4d43e1365d3eb53c608a3d208cabd4 (diff) | |
Merge tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- addition of a maintainer's profile for the media subsystem
- addition of i.MX8 IP support
- qcom/camss gained support for hardware version Titan 170
- new RC keymaps
- Lots of other improvements, cleanups and bug fixes
* tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (488 commits)
media: coda: fix macroblocks count control usage
media: rkisp1: params: fix wrong bits settings
media: cedrus: Fix H265 status definitions
media: meson-ge2d: fix rotation parameters
media: v4l2-ctrls: fix reference to freed memory
media: venus : hfi: add venus image info into smem
media: venus: Fix internal buffer size calculations for v6.
media: venus: helpers: keep max bandwidth when mbps exceeds the supported range
media: venus: fix hw overload error log condition
media: venus: core: correct firmware name for sm8250
media: venus: core,pm: fix potential infinite loop
media: venus: core: Fix kerneldoc warnings
media: gscpa/stv06xx: fix memory leak
media: cx25821: remove unused including <linux/version.h>
media: staging: media/meson: remove redundant dev_err call
media: adv7842: support 1 block EDIDs, fix clearing EDID
media: adv7842: configure all pads
media: allegro: change kernel-doc comment blocks to normal comments
media: camss: ispif: Remove redundant dev_err call in msm_ispif_subdev_init()
media: i2c: rdamc21: Fix warning on u8 cast
...
Diffstat (limited to 'include')
31 files changed, 376 insertions, 276 deletions
diff --git a/include/linux/platform_data/media/camera-mx2.h b/include/linux/platform_data/media/camera-mx2.h deleted file mode 100644 index 8cfa76b6e1e1..000000000000 --- a/include/linux/platform_data/media/camera-mx2.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * mx2-cam.h - i.MX27/i.MX25 camera driver header file - * - * Copyright (C) 2003, Intel Corporation - * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de> - * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il> - */ - -#ifndef __MACH_MX2_CAM_H_ -#define __MACH_MX2_CAM_H_ - -#define MX2_CAMERA_EXT_VSYNC (1 << 1) -#define MX2_CAMERA_CCIR (1 << 2) -#define MX2_CAMERA_CCIR_INTERLACE (1 << 3) -#define MX2_CAMERA_HSYNC_HIGH (1 << 4) -#define MX2_CAMERA_GATED_CLOCK (1 << 5) -#define MX2_CAMERA_INV_DATA (1 << 6) -#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) - -/** - * struct mx2_camera_platform_data - optional platform data for mx2_camera - * @flags: any combination of MX2_CAMERA_* - * @clk: clock rate of the csi block / 2 - */ -struct mx2_camera_platform_data { - unsigned long flags; - unsigned long clk; -}; - -#endif /* __MACH_MX2_CAM_H_ */ diff --git a/include/linux/platform_data/media/camera-mx3.h b/include/linux/platform_data/media/camera-mx3.h deleted file mode 100644 index 781c004e5596..000000000000 --- a/include/linux/platform_data/media/camera-mx3.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * mx3_camera.h - i.MX3x camera driver header file - * - * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - */ - -#ifndef _MX3_CAMERA_H_ -#define _MX3_CAMERA_H_ - -#include <linux/device.h> - -#define MX3_CAMERA_CLK_SRC 1 -#define MX3_CAMERA_EXT_VSYNC 2 -#define MX3_CAMERA_DP 4 -#define MX3_CAMERA_PCP 8 -#define MX3_CAMERA_HSP 0x10 -#define MX3_CAMERA_VSP 0x20 -#define MX3_CAMERA_DATAWIDTH_4 0x40 -#define MX3_CAMERA_DATAWIDTH_8 0x80 -#define MX3_CAMERA_DATAWIDTH_10 0x100 -#define MX3_CAMERA_DATAWIDTH_15 0x200 - -#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \ - MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15) - -struct v4l2_async_subdev; - -/** - * struct mx3_camera_pdata - i.MX3x camera platform data - * @flags: MX3_CAMERA_* flags - * @mclk_10khz: master clock frequency in 10kHz units - * @dma_dev: IPU DMA device to match against in channel allocation - */ -struct mx3_camera_pdata { - unsigned long flags; - unsigned long mclk_10khz; - struct device *dma_dev; - struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */ - int *asd_sizes; /* 0-terminated array of asd group sizes */ -}; - -#endif diff --git a/include/media/cec.h b/include/media/cec.h index cd35ae6b7560..208c9613c07e 100644 --- a/include/media/cec.h +++ b/include/media/cec.h @@ -28,8 +28,8 @@ * @minor: device node minor number * @registered: the device was correctly registered * @unregistered: the device was unregistered - * @fhs_lock: lock to control access to the filehandle list * @fhs: the list of open filehandles (cec_fh) + * @lock: lock to control access to this structure * * This structure represents a cec-related device node. * diff --git a/include/media/davinci/isif.h b/include/media/davinci/isif.h index e66589c4022d..8369acd26e7e 100644 --- a/include/media/davinci/isif.h +++ b/include/media/davinci/isif.h @@ -177,7 +177,7 @@ struct isif_black_clamp { * 1 - clamp value calculated separately for all colors */ __u8 bc_mode_color; - /* Vrtical start position for bc subtraction */ + /* Vertical start position for bc subtraction */ __u16 vert_start_sub; /* Black clamp for horizontal direction */ struct isif_horz_bclamp horz; @@ -193,7 +193,7 @@ struct isif_color_space_conv { /* Enable color space conversion */ __u8 en; /* - * csc coeffient table. S8Q5, M00 at index 0, M01 at index 1, and + * csc coefficient table. S8Q5, M00 at index 0, M01 at index 1, and * so forth */ struct isif_float_8 coeff[ISIF_CSC_NUM_COEFF]; @@ -340,7 +340,7 @@ struct isif_data_formatter { }; struct isif_df_csc { - /* Color Space Conversion confguration, 0 - csc, 1 - df */ + /* Color Space Conversion configuration, 0 - csc, 1 - df */ __u8 df_or_csc; /* csc configuration valid if df_or_csc is 0 */ struct isif_color_space_conv csc; @@ -406,7 +406,7 @@ struct isif_config_params_raw { struct isif_linearize linearize; /* Data formatter or CSC */ struct isif_df_csc df_csc; - /* Defect Pixel Correction (DFC) confguration */ + /* Defect Pixel Correction (DFC) configuration */ struct isif_dfc dfc; /* Black/Digital Clamp configuration */ struct isif_black_clamp bclamp; diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h index e1b1c76aa50f..a4fc4f2a56fb 100644 --- a/include/media/davinci/vpbe_osd.h +++ b/include/media/davinci/vpbe_osd.h @@ -54,9 +54,9 @@ enum osd_win_layer { * @PIXFMT_4BPP: 4-bits-per-pixel bitmap * @PIXFMT_8BPP: 8-bits-per-pixel bitmap * @PIXFMT_RGB565: 16-bits-per-pixel RGB565 - * @PIXFMT_YCbCrI: YUV 4:2:2 + * @PIXFMT_YCBCRI: YUV 4:2:2 * @PIXFMT_RGB888: 24-bits-per-pixel RGB888 - * @PIXFMT_YCrCbI: YUV 4:2:2 with chroma swap + * @PIXFMT_YCRCBI: YUV 4:2:2 with chroma swap * @PIXFMT_NV12: YUV 4:2:0 planar * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp) * @@ -210,7 +210,7 @@ enum osd_cursor_h_width { }; /** - * enum davinci_cursor_v_width + * enum osd_cursor_v_width * @V_WIDTH_1: vertical line width is 1 line * @V_WIDTH_2: vertical line width is 2 lines * @V_WIDTH_4: vertical line width is 4 lines diff --git a/include/media/dvbdev.h b/include/media/dvbdev.h index b04a38be5183..2f6b0861322a 100644 --- a/include/media/dvbdev.h +++ b/include/media/dvbdev.h @@ -421,7 +421,7 @@ void dvb_module_release(struct i2c_client *client); * dvb_attach - attaches a DVB frontend into the DVB core. * * @FUNCTION: function on a frontend module to be called. - * @ARGS...: @FUNCTION arguments. + * @ARGS: @FUNCTION arguments. * * This ancillary function loads a frontend module in runtime and runs * the @FUNCTION function there, with @ARGS. diff --git a/include/media/i2c/adv7343.h b/include/media/i2c/adv7343.h index e4142b1ef8cd..b8937035c5d3 100644 --- a/include/media/i2c/adv7343.h +++ b/include/media/i2c/adv7343.h @@ -21,7 +21,7 @@ #define ADV7343_SVIDEO_ID (2) /** - * adv7343_power_mode - power mode configuration. + * struct adv7343_power_mode - power mode configuration. * @sleep_mode: on enable the current consumption is reduced to micro ampere * level. All DACs and the internal PLL circuit are disabled. * Registers can be read from and written in sleep mode. diff --git a/include/media/i2c/mt9t112.h b/include/media/i2c/mt9t112.h index cc80d5cc2104..e678b6ae8e2f 100644 --- a/include/media/i2c/mt9t112.h +++ b/include/media/i2c/mt9t112.h @@ -14,7 +14,7 @@ struct mt9t112_pll_divider { }; /** - * mt9t112_platform_data - mt9t112 driver interface + * struct mt9t112_platform_data - mt9t112 driver interface * @flags: Sensor media bus configuration. * @divider: Sensor PLL configuration */ diff --git a/include/media/i2c/noon010pc30.h b/include/media/i2c/noon010pc30.h index a035d2d9a564..d1b2e06a1de0 100644 --- a/include/media/i2c/noon010pc30.h +++ b/include/media/i2c/noon010pc30.h @@ -10,6 +10,7 @@ #define NOON010PC30_H /** + * struct noon010pc30_platform_data - platform data * @clk_rate: the clock frequency in Hz * @gpio_nreset: GPIO driving nRESET pin * @gpio_nstby: GPIO driving nSTBY pin diff --git a/include/media/i2c/ov772x.h b/include/media/i2c/ov772x.h index a1702d420087..26f363ea4001 100644 --- a/include/media/i2c/ov772x.h +++ b/include/media/i2c/ov772x.h @@ -46,7 +46,7 @@ struct ov772x_edge_ctrl { } /** - * ov772x_camera_info - ov772x driver interface structure + * struct ov772x_camera_info - ov772x driver interface structure * @flags: Sensor configuration flags * @edgectrl: Sensor edge control */ diff --git a/include/media/i2c/s5c73m3.h b/include/media/i2c/s5c73m3.h index ccb9e5448762..a51f1025ba1c 100644 --- a/include/media/i2c/s5c73m3.h +++ b/include/media/i2c/s5c73m3.h @@ -35,6 +35,7 @@ struct s5c73m3_gpio { * @mclk_frequency: sensor's master clock frequency in Hz * @gpio_reset: GPIO driving RESET pin * @gpio_stby: GPIO driving STBY pin + * @bus_type: bus type * @nlanes: maximum number of MIPI-CSI lanes used * @horiz_flip: default horizontal image flip value, non zero to enable * @vert_flip: default vertical image flip value, non zero to enable diff --git a/include/media/i2c/s5k4ecgx.h b/include/media/i2c/s5k4ecgx.h index fccb7be8ed8f..92202eb35249 100644 --- a/include/media/i2c/s5k4ecgx.h +++ b/include/media/i2c/s5k4ecgx.h @@ -11,7 +11,7 @@ /** * struct s5k4ecgx_gpio - data structure describing a GPIO - * @gpio : GPIO number + * @gpio: GPIO number * @level: indicates active state of the @gpio */ struct s5k4ecgx_gpio { @@ -20,9 +20,9 @@ struct s5k4ecgx_gpio { }; /** - * struct ss5k4ecgx_platform_data- s5k4ecgx driver platform data + * struct s5k4ecgx_platform_data - s5k4ecgx driver platform data * @gpio_reset: GPIO driving RESET pin - * @gpio_stby : GPIO driving STBY pin + * @gpio_stby: GPIO driving STBY pin */ struct s5k4ecgx_platform_data { diff --git a/include/media/i2c/s5k6aa.h b/include/media/i2c/s5k6aa.h index fd78e85e8b78..eb3444d8b731 100644 --- a/include/media/i2c/s5k6aa.h +++ b/include/media/i2c/s5k6aa.h @@ -28,6 +28,7 @@ struct s5k6aa_gpio { * @mclk_frequency: sensor's master clock frequency in Hz * @gpio_reset: GPIO driving RESET pin * @gpio_stby: GPIO driving STBY pin + * @bus_type: bus type * @nlanes: maximum number of MIPI-CSI lanes used * @horiz_flip: default horizontal image flip value, non zero to enable * @vert_flip: default vertical image flip value, non zero to enable diff --git a/include/media/i2c/tvp514x.h b/include/media/i2c/tvp514x.h index 0c1bb04bdbcb..837efff0a6a0 100644 --- a/include/media/i2c/tvp514x.h +++ b/include/media/i2c/tvp514x.h @@ -29,10 +29,7 @@ #define PAL_NUM_ACTIVE_PIXELS (720) #define PAL_NUM_ACTIVE_LINES (576) -/** - * enum tvp514x_input - enum for different decoder input pin - * configuration. - */ +/* enum for different decoder input pin configuration */ enum tvp514x_input { /* * CVBS input selection @@ -69,11 +66,7 @@ enum tvp514x_input { INPUT_INVALID }; -/** - * enum tvp514x_output - enum for output format - * supported. - * - */ +/* enum for output format supported. */ enum tvp514x_output { OUTPUT_10BIT_422_EMBEDDED_SYNC = 0, OUTPUT_20BIT_422_SEPERATE_SYNC, diff --git a/include/media/i2c/tw9910.h b/include/media/i2c/tw9910.h index 92d31bd1afe6..77da94f909e3 100644 --- a/include/media/i2c/tw9910.h +++ b/include/media/i2c/tw9910.h @@ -13,9 +13,7 @@ #ifndef __TW9910_H__ #define __TW9910_H__ -/** - * tw9910_mpout_pin - MPOUT (multi-purpose output) pin functions - */ +/* MPOUT (multi-purpose output) pin functions */ enum tw9910_mpout_pin { TW9910_MPO_VLOSS, TW9910_MPO_HLOCK, @@ -28,10 +26,10 @@ enum tw9910_mpout_pin { }; /** - * tw9910_video_info - tw9910 driver interface structure + * struct tw9910_video_info - tw9910 driver interface structure * @buswidth: Parallel data bus width (8 or 16). * @mpout: Selected function of MPOUT (multi-purpose output) pin. - * See &enum tw9910_mpout_pin + * See enum tw9910_mpout_pin */ struct tw9910_video_info { unsigned long buswidth; diff --git a/include/media/media-entity.h b/include/media/media-entity.h index cbdfcb79d0d0..09737b47881f 100644 --- a/include/media/media-entity.h +++ b/include/media/media-entity.h @@ -155,7 +155,7 @@ struct media_link { * uniquely identified by the pad number. * @PAD_SIGNAL_ANALOG: * The pad contains an analog signal. It can be Radio Frequency, - * Intermediate Frequency, a baseband signal or sub-cariers. + * Intermediate Frequency, a baseband signal or sub-carriers. * Tuner inputs, IF-PLL demodulators, composite and s-video signals * should use it. * @PAD_SIGNAL_DV: @@ -885,6 +885,11 @@ int media_entity_get_fwnode_pad(struct media_entity *entity, * * @graph: Media graph structure that will be used to walk the graph * @mdev: Pointer to the &media_device that contains the object + * + * The caller is required to hold the media_device graph_mutex during the graph + * walk until the graph state is released. + * + * Returns zero on success or a negative error code otherwise. */ __must_check int media_graph_walk_init( struct media_graph *graph, struct media_device *mdev); diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 30f138ebab6f..b5585d14fff4 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -277,9 +277,12 @@ struct rc_map *rc_map_get(const char *name); #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051" #define RC_MAP_LME2510 "rc-lme2510" #define RC_MAP_MANLI "rc-manli" +#define RC_MAP_MECOOL_KII_PRO "rc-mecool-kii-pro" +#define RC_MAP_MECOOL_KIII_PRO "rc-mecool-kiii-pro" #define RC_MAP_MEDION_X10 "rc-medion-x10" #define RC_MAP_MEDION_X10_DIGITAINER "rc-medion-x10-digitainer" #define RC_MAP_MEDION_X10_OR2X "rc-medion-x10-or2x" +#define RC_MAP_MINIX_NEO "rc-minix-neo" #define RC_MAP_MSI_DIGIVOX_II "rc-msi-digivox-ii" #define RC_MAP_MSI_DIGIVOX_III "rc-msi-digivox-iii" #define RC_MAP_MSI_TVANYWHERE "rc-msi-tvanywhere" @@ -338,6 +341,7 @@ struct rc_map *rc_map_get(const char *name); #define RC_MAP_WINFAST "rc-winfast" #define RC_MAP_WINFAST_USBII_DELUXE "rc-winfast-usbii-deluxe" #define RC_MAP_X96MAX "rc-x96max" +#define RC_MAP_XBOX_360 "rc-xbox-360" #define RC_MAP_XBOX_DVD "rc-xbox-dvd" #define RC_MAP_ZX_IRDEC "rc-zx-irdec" diff --git a/include/media/v4l2-async.h b/include/media/v4l2-async.h index f572e1279182..5b275a845c20 100644 --- a/include/media/v4l2-async.h +++ b/include/media/v4l2-async.h @@ -286,16 +286,16 @@ void v4l2_async_notifier_cleanup(struct v4l2_async_notifier *notifier); int v4l2_async_register_subdev(struct v4l2_subdev *sd); /** - * v4l2_async_register_subdev_sensor_common - registers a sensor sub-device to - * the asynchronous sub-device - * framework and parse set up common - * sensor related devices + * v4l2_async_register_subdev_sensor - registers a sensor sub-device to the + * asynchronous sub-device framework and + * parse set up common sensor related + * devices * * @sd: pointer to struct &v4l2_subdev * * This function is just like v4l2_async_register_subdev() with the exception * that calling it will also parse firmware interfaces for remote references - * using v4l2_async_notifier_parse_fwnode_sensor_common() and registers the + * using v4l2_async_notifier_parse_fwnode_sensor() and registers the * async sub-devices. The sub-device is similarly unregistered by calling * v4l2_async_unregister_subdev(). * @@ -305,7 +305,7 @@ int v4l2_async_register_subdev(struct v4l2_subdev *sd); * to register it. */ int __must_check -v4l2_async_register_subdev_sensor_common(struct v4l2_subdev *sd); +v4l2_async_register_subdev_sensor(struct v4l2_subdev *sd); /** * v4l2_async_unregister_subdev - unregisters a sub-device to the asynchronous diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index 167ca8c8424f..a5953b812878 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -18,7 +18,6 @@ * This will move to the public headers once this API is fully stable. */ #include <media/mpeg2-ctrls.h> -#include <media/vp8-ctrls.h> #include <media/hevc-ctrls.h> /* forward references */ @@ -50,10 +49,12 @@ struct video_device; * @p_h264_slice_params: Pointer to a struct v4l2_ctrl_h264_slice_params. * @p_h264_decode_params: Pointer to a struct v4l2_ctrl_h264_decode_params. * @p_h264_pred_weights: Pointer to a struct v4l2_ctrl_h264_pred_weights. - * @p_vp8_frame_header: Pointer to a VP8 frame header structure. + * @p_vp8_frame: Pointer to a VP8 frame params structure. * @p_hevc_sps: Pointer to an HEVC sequence parameter set structure. * @p_hevc_pps: Pointer to an HEVC picture parameter set structure. * @p_hevc_slice_params: Pointer to an HEVC slice parameters structure. + * @p_hdr10_cll: Pointer to an HDR10 Content Light Level structure. + * @p_hdr10_mastering: Pointer to an HDR10 Mastering Display structure. * @p_area: Pointer to an area. * @p: Pointer to a compound value. * @p_const: Pointer to a constant compound value. @@ -74,10 +75,12 @@ union v4l2_ctrl_ptr { struct v4l2_ctrl_h264_slice_params *p_h264_slice_params; struct v4l2_ctrl_h264_decode_params *p_h264_decode_params; struct v4l2_ctrl_h264_pred_weights *p_h264_pred_weights; - struct v4l2_ctrl_vp8_frame_header *p_vp8_frame_header; + struct v4l2_ctrl_vp8_frame *p_vp8_frame; struct v4l2_ctrl_hevc_sps *p_hevc_sps; struct v4l2_ctrl_hevc_pps *p_hevc_pps; struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params; + struct v4l2_ctrl_hdr10_cll_info *p_hdr10_cll; + struct v4l2_ctrl_hdr10_mastering_display *p_hdr10_mastering; struct v4l2_area *p_area; void *p; const void *p_const; @@ -301,12 +304,14 @@ struct v4l2_ctrl { * the control has been applied. This prevents applying controls * from a cluster with multiple controls twice (when the first * control of a cluster is applied, they all are). - * @req: If set, this refers to another request that sets this control. + * @valid_p_req: If set, then p_req contains the control value for the request. * @p_req: If the control handler containing this control reference * is bound to a media request, then this points to the - * value of the control that should be applied when the request + * value of the control that must be applied when the request * is executed, or to the value of the control at the time - * that the request was completed. + * that the request was completed. If @valid_p_req is false, + * then this control was never set for this request and the + * control will not be updated when this request is applied. * * Each control handler has a list of these refs. The list_head is used to * keep a sorted-by-control-ID list of all controls, while the next pointer @@ -319,7 +324,7 @@ struct v4l2_ctrl_ref { struct v4l2_ctrl_helper *helper; bool from_other_dev; bool req_done; - struct v4l2_ctrl_ref *req; + bool valid_p_req; union v4l2_ctrl_ptr p_req; }; @@ -346,7 +351,7 @@ struct v4l2_ctrl_ref { * @error: The error code of the first failed control addition. * @request_is_queued: True if the request was queued. * @requests: List to keep track of open control handler request objects. - * For the parent control handler (@req_obj.req == NULL) this + * For the parent control handler (@req_obj.ops == NULL) this * is the list header. When the parent control handler is * removed, it has to unbind and put all these requests since * they refer to the parent. diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h index 80d21ad8d603..7ab033b819eb 100644 --- a/include/media/v4l2-fwnode.h +++ b/include/media/v4l2-fwnode.h @@ -510,27 +510,6 @@ v4l2_async_notifier_parse_fwnode_endpoints(struct device *dev, size_t asd_struct_size, parse_endpoint_func parse_endpoint); -/** - * v4l2_async_notifier_parse_fwnode_sensor_common - parse common references on - * sensors for async sub-devices - * @dev: the device node the properties of which are parsed for references - * @notifier: the async notifier where the async subdevs will be added - * - * Parse common sensor properties for remote devices related to the - * sensor and set up async sub-devices for them. - * - * Any notifier populated using this function must be released with a call to - * v4l2_async_notifier_release() after it has been unregistered and the async - * sub-devices are no longer in use, even in the case the function returned an - * error. - * - * Return: 0 on success - * -ENOMEM if memory allocation failed - * -EINVAL if property parsing failed - */ -int v4l2_async_notifier_parse_fwnode_sensor_common(struct device *dev, - struct v4l2_async_notifier *notifier); - /* Helper macros to access the connector links. */ /** v4l2_connector_last_link - Helper macro to get the first diff --git a/include/media/v4l2-h264.h b/include/media/v4l2-h264.h index d2314f4d4490..4b1c71c935e0 100644 --- a/include/media/v4l2-h264.h +++ b/include/media/v4l2-h264.h @@ -66,11 +66,11 @@ v4l2_h264_build_b_ref_lists(const struct v4l2_h264_reflist_builder *builder, u8 *b0_reflist, u8 *b1_reflist); /** - * v4l2_h264_build_b_ref_lists() - Build the P reference list + * v4l2_h264_build_p_ref_list() - Build the P reference list * * @builder: reference list builder context - * @p_reflist: 16-bytes array used to store the P reference list. Each entry - * is an index in the DPB + * @reflist: 16-bytes array used to store the P reference list. Each entry + * is an index in the DPB * * This functions builds the P reference lists. This procedure is describe in * section '8.2.4 Decoding process for reference picture lists construction' diff --git a/include/media/v4l2-jpeg.h b/include/media/v4l2-jpeg.h index ddba2a56c321..2dba843ce3bd 100644 --- a/include/media/v4l2-jpeg.h +++ b/include/media/v4l2-jpeg.h @@ -88,10 +88,30 @@ struct v4l2_jpeg_scan_header { }; /** + * enum v4l2_jpeg_app14_tf - APP14 transform flag + * According to Rec. ITU-T T.872 (06/2012) 6.5.3 + * APP14 segment is for color encoding, it contains a transform flag, + * which may have values of 0, 1 and 2 and are interpreted as follows: + * @V4L2_JPEG_APP14_TF_CMYK_RGB: CMYK for images encoded with four components + * RGB for images encoded with three components + * @V4L2_JPEG_APP14_TF_YCBCR: an image encoded with three components using YCbCr + * @V4L2_JPEG_APP14_TF_YCCK: an image encoded with four components using YCCK + * @V4L2_JPEG_APP14_TF_UNKNOWN: indicate app14 is not present + */ +enum v4l2_jpeg_app14_tf { + V4L2_JPEG_APP14_TF_CMYK_RGB = 0, + V4L2_JPEG_APP14_TF_YCBCR = 1, + V4L2_JPEG_APP14_TF_YCCK = 2, + V4L2_JPEG_APP14_TF_UNKNOWN = -1, +}; + +/** * struct v4l2_jpeg_header - parsed JPEG header * @sof: pointer to frame header and size * @sos: pointer to scan header and size + * @num_dht: number of entries in @dht * @dht: pointers to huffman tables and sizes + * @num_dqt: number of entries in @dqt * @dqt: pointers to quantization tables and sizes * @frame: parsed frame header * @scan: pointer to parsed scan header, optional @@ -100,6 +120,7 @@ struct v4l2_jpeg_scan_header { * order, optional * @restart_interval: number of MCU per restart interval, Ri * @ecs_offset: buffer offset in bytes to the entropy coded segment + * @app14_tf: transform flag from app14 data * * When this structure is passed to v4l2_jpeg_parse_header, the optional scan, * quantization_tables, and huffman_tables pointers must be initialized to NULL @@ -119,6 +140,7 @@ struct v4l2_jpeg_header { struct v4l2_jpeg_reference *huffman_tables; u16 restart_interval; size_t ecs_offset; + enum v4l2_jpeg_app14_tf app14_tf; }; int v4l2_jpeg_parse_header(void *buf, size_t len, struct v4l2_jpeg_header *out); diff --git a/include/media/v4l2-mc.h b/include/media/v4l2-mc.h index bdaa5f2f8ca2..c181685923d5 100644 --- a/include/media/v4l2-mc.h +++ b/include/media/v4l2-mc.h @@ -91,6 +91,7 @@ int v4l_vb2q_enable_media_source(struct vb2_queue *q); * * @src_sd: pointer to a source subdev * @sink: pointer to a subdev sink pad + * @flags: the link flags * * This function searches for fwnode endpoint connections from a source * subdevice to a single sink pad, and if suitable connections are found, @@ -98,6 +99,11 @@ int v4l_vb2q_enable_media_source(struct vb2_queue *q); * called by the sink subdevice, in its v4l2-async notifier subdev bound * callback, to create links from a bound source subdevice. * + * The @flags argument specifies the link flags. The caller shall ensure that + * the flags are valid regardless of the number of links that may be created. + * For instance, setting the MEDIA_LNK_FL_ENABLED flag will cause all created + * links to be enabled, which isn't valid if more than one link is created. + * * .. note:: * * Any sink subdevice that calls this function must implement the @@ -107,7 +113,7 @@ int v4l_vb2q_enable_media_source(struct vb2_queue *q); * Return 0 on success or a negative error code on failure. */ int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, - struct media_pad *sink); + struct media_pad *sink, u32 flags); /** * v4l2_create_fwnode_links - Create fwnode-based links from a source diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index 799ba61b5b6f..12955cb460d2 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -154,9 +154,11 @@ struct vb2_mem_ops { * @dbuf: dma_buf - shared buffer object. * @dbuf_mapped: flag to show whether dbuf is mapped or not * @bytesused: number of bytes occupied by data in the plane (payload). - * @length: size of this plane (NOT the payload) in bytes. + * @length: size of this plane (NOT the payload) in bytes. The maximum + * valid size is MAX_UINT - PAGE_SIZE. * @min_length: minimum required size of this plane (NOT the payload) in bytes. - * @length is always greater or equal to @min_length. + * @length is always greater or equal to @min_length, and like + * @length, it is limited to MAX_UINT - PAGE_SIZE. * @m: Union with memtype-specific data. * @m.offset: when memory in the associated struct vb2_buffer is * %VB2_MEMORY_MMAP, equals the offset from the start of diff --git a/include/media/vp8-ctrls.h b/include/media/vp8-ctrls.h deleted file mode 100644 index 3969550df148..000000000000 --- a/include/media/vp8-ctrls.h +++ /dev/null @@ -1,114 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * These are the VP8 state controls for use with stateless VP8 - * codec drivers. - * - * It turns out that these structs are not stable yet and will undergo - * more changes. So keep them private until they are stable and ready to - * become part of the official public API. - */ - -#ifndef _VP8_CTRLS_H_ -#define _VP8_CTRLS_H_ - -#include <linux/types.h> - -#define V4L2_PIX_FMT_VP8_FRAME v4l2_fourcc('V', 'P', '8', 'F') - -#define V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER (V4L2_CID_CODEC_BASE + 2000) -#define V4L2_CTRL_TYPE_VP8_FRAME_HEADER 0x301 - -#define V4L2_VP8_SEGMENT_HEADER_FLAG_ENABLED 0x01 -#define V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_MAP 0x02 -#define V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_FEATURE_DATA 0x04 -#define V4L2_VP8_SEGMENT_HEADER_FLAG_DELTA_VALUE_MODE 0x08 - -struct v4l2_vp8_segment_header { - __s8 quant_update[4]; - __s8 lf_update[4]; - __u8 segment_probs[3]; - __u8 padding; - __u32 flags; -}; - -#define V4L2_VP8_LF_HEADER_ADJ_ENABLE 0x01 -#define V4L2_VP8_LF_HEADER_DELTA_UPDATE 0x02 -#define V4L2_VP8_LF_FILTER_TYPE_SIMPLE 0x04 -struct v4l2_vp8_loopfilter_header { - __s8 ref_frm_delta[4]; - __s8 mb_mode_delta[4]; - __u8 sharpness_level; - __u8 level; - __u16 padding; - __u32 flags; -}; - -struct v4l2_vp8_quantization_header { - __u8 y_ac_qi; - __s8 y_dc_delta; - __s8 y2_dc_delta; - __s8 y2_ac_delta; - __s8 uv_dc_delta; - __s8 uv_ac_delta; - __u16 padding; -}; - -#define V4L2_VP8_COEFF_PROB_CNT 11 -#define V4L2_VP8_MV_PROB_CNT 19 -struct v4l2_vp8_entropy_header { - __u8 coeff_probs[4][8][3][V4L2_VP8_COEFF_PROB_CNT]; - __u8 y_mode_probs[4]; - __u8 uv_mode_probs[3]; - __u8 mv_probs[2][V4L2_VP8_MV_PROB_CNT]; - __u8 padding[3]; -}; - -struct v4l2_vp8_entropy_coder_state { - __u8 range; - __u8 value; - __u8 bit_count; - __u8 padding; -}; - -#define V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME 0x01 -#define V4L2_VP8_FRAME_HEADER_FLAG_EXPERIMENTAL 0x02 -#define V4L2_VP8_FRAME_HEADER_FLAG_SHOW_FRAME 0x04 -#define V4L2_VP8_FRAME_HEADER_FLAG_MB_NO_SKIP_COEFF 0x08 -#define V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN 0x10 -#define V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT 0x20 - -#define VP8_FRAME_IS_KEY_FRAME(hdr) \ - (!!((hdr)->flags & V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME)) - -struct v4l2_ctrl_vp8_frame_header { - struct v4l2_vp8_segment_header segment_header; - struct v4l2_vp8_loopfilter_header lf_header; - struct v4l2_vp8_quantization_header quant_header; - struct v4l2_vp8_entropy_header entropy_header; - struct v4l2_vp8_entropy_coder_state coder_state; - - __u16 width; - __u16 height; - - __u8 horizontal_scale; - __u8 vertical_scale; - - __u8 version; - __u8 prob_skip_false; - __u8 prob_intra; - __u8 prob_last; - __u8 prob_gf; - __u8 num_dct_parts; - - __u32 first_part_size; - __u32 first_part_header_bits; - __u32 dct_part_sizes[8]; - - __u64 last_frame_ts; - __u64 golden_frame_ts; - __u64 alt_frame_ts; - - __u64 flags; -}; - -#endif diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h index 7d1a06c52469..dc8879d179fd 100644 --- a/include/uapi/linux/cec.h +++ b/include/uapi/linux/cec.h @@ -396,6 +396,7 @@ struct cec_drm_connector_info { * associated with the CEC adapter. * @type: connector type (if any) * @drm: drm connector info + * @raw: array to pad the union */ struct cec_connector_info { __u32 type; @@ -453,7 +454,7 @@ struct cec_event_lost_msgs { * struct cec_event - CEC event structure * @ts: the timestamp of when the event was sent. * @event: the event. - * array. + * @flags: event flags. * @state_change: the event payload for CEC_EVENT_STATE_CHANGE. * @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS. * @raw: array to pad the union. diff --git a/include/uapi/linux/rkisp1-config.h b/include/uapi/linux/rkisp1-config.h index 36e3efb81b01..583ca0d9a79d 100644 --- a/include/uapi/linux/rkisp1-config.h +++ b/include/uapi/linux/rkisp1-config.h @@ -15,7 +15,7 @@ #define RKISP1_CIF_ISP_MODULE_BLS (1U << 1) /* Sensor De-gamma */ #define RKISP1_CIF_ISP_MODULE_SDG (1U << 2) -/* Histogram */ +/* Histogram statistics configuration */ #define RKISP1_CIF_ISP_MODULE_HST (1U << 3) /* Lens Shade Control */ #define RKISP1_CIF_ISP_MODULE_LSC (1U << 4) @@ -31,13 +31,13 @@ #define RKISP1_CIF_ISP_MODULE_GOC (1U << 9) /* Color Processing */ #define RKISP1_CIF_ISP_MODULE_CPROC (1U << 10) -/* Auto Focus Control */ +/* Auto Focus Control statistics configuration */ #define RKISP1_CIF_ISP_MODULE_AFC (1U << 11) -/* Auto White Balancing */ +/* Auto White Balancing statistics configuration */ #define RKISP1_CIF_ISP_MODULE_AWB (1U << 12) /* Image Effect */ #define RKISP1_CIF_ISP_MODULE_IE (1U << 13) -/* Auto Exposure Control */ +/* Auto Exposure Control statistics configuration */ #define RKISP1_CIF_ISP_MODULE_AEC (1U << 14) /* Wide Dynamic Range */ #define RKISP1_CIF_ISP_MODULE_WDR (1U << 15) @@ -411,7 +411,7 @@ struct rkisp1_cif_isp_cproc_config { }; /** - * struct rkisp1_cif_isp_awb_meas_config - Configuration used by auto white balance + * struct rkisp1_cif_isp_awb_meas_config - Configuration for the AWB statistics * * @awb_mode: the awb meas mode. From enum rkisp1_cif_isp_awb_mode_type. * @awb_wnd: white balance measurement window (in pixels) @@ -550,7 +550,7 @@ struct rkisp1_cif_isp_goc_config { }; /** - * struct rkisp1_cif_isp_hst_config - Configuration used by Histogram + * struct rkisp1_cif_isp_hst_config - Configuration for Histogram statistics * * @mode: histogram mode (from enum rkisp1_cif_isp_histogram_mode) * @histogram_predivider: process every stepsize pixel, all other pixels are @@ -575,7 +575,7 @@ struct rkisp1_cif_isp_hst_config { }; /** - * struct rkisp1_cif_isp_aec_config - Configuration used by Auto Exposure Control + * struct rkisp1_cif_isp_aec_config - Configuration for Auto Exposure statistics * * @mode: Exposure measure mode (from enum rkisp1_cif_isp_exp_meas_mode) * @autostop: stop mode (from enum rkisp1_cif_isp_exp_ctrl_autostop) @@ -588,7 +588,7 @@ struct rkisp1_cif_isp_aec_config { }; /** - * struct rkisp1_cif_isp_afc_config - Configuration used by Auto Focus Control + * struct rkisp1_cif_isp_afc_config - Configuration for the Auto Focus statistics * * @num_afm_win: max RKISP1_CIF_ISP_AFM_MAX_WINDOWS * @afm_win: coordinates of the meas window diff --git a/include/uapi/linux/uvcvideo.h b/include/uapi/linux/uvcvideo.h index f80f05b3c423..8288137387c0 100644 --- a/include/uapi/linux/uvcvideo.h +++ b/include/uapi/linux/uvcvideo.h @@ -76,11 +76,11 @@ struct uvc_xu_control_query { /** * struct uvc_meta_buf - metadata buffer building block - * @ns - system timestamp of the payload in nanoseconds - * @sof - USB Frame Number - * @length - length of the payload header - * @flags - payload header flags - * @buf - optional device-specific header data + * @ns: system timestamp of the payload in nanoseconds + * @sof: USB Frame Number + * @length: length of the payload header + * @flags: payload header flags + * @buf: optional device-specific header data * * UVC metadata nodes fill buffers with possibly multiple instances of this * struct. The first two fields are added by the driver, they can be used for diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 039c0d7add1b..d43bec5f1afd 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -66,6 +66,7 @@ #define V4L2_CTRL_CLASS_RF_TUNER 0x00a20000 /* RF tuner controls */ #define V4L2_CTRL_CLASS_DETECT 0x00a30000 /* Detection controls */ #define V4L2_CTRL_CLASS_CODEC_STATELESS 0x00a40000 /* Stateless codecs controls */ +#define V4L2_CTRL_CLASS_COLORIMETRY 0x00a50000 /* Colorimetry controls */ /* User-class control IDs */ @@ -428,6 +429,11 @@ enum v4l2_mpeg_video_multi_slice_mode { #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_CODEC_BASE+228) #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (V4L2_CID_CODEC_BASE+229) #define V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (V4L2_CID_CODEC_BASE+230) +#define V4L2_CID_MPEG_VIDEO_AU_DELIMITER (V4L2_CID_CODEC_BASE+231) +#define V4L2_CID_MPEG_VIDEO_LTR_COUNT (V4L2_CID_CODEC_BASE+232) +#define V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (V4L2_CID_CODEC_BASE+233) +#define V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (V4L2_CID_CODEC_BASE+234) +#define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (V4L2_CID_CODEC_BASE+235) /* CIDs for the MPEG-2 Part 2 (H.262) codec */ #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_CODEC_BASE+270) @@ -797,6 +803,9 @@ enum v4l2_mpeg_video_frame_skip_mode { #define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP (V4L2_CID_CODEC_BASE + 651) #define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP (V4L2_CID_CODEC_BASE + 652) +#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY (V4L2_CID_CODEC_BASE + 653) +#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE (V4L2_CID_CODEC_BASE + 654) + /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000) #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+0) @@ -1329,7 +1338,7 @@ struct v4l2_ctrl_h264_sps { * struct v4l2_ctrl_h264_pps - H264 picture parameter set * * Except where noted, all the members on this picture parameter set - * structure match the sequence parameter set syntax as specified + * structure match the picture parameter set syntax as specified * by the H264 specification. * * In particular, V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT flag @@ -1657,6 +1666,236 @@ struct v4l2_ctrl_fwht_params { __u32 quantization; }; +/* Stateless VP8 control */ + +#define V4L2_VP8_SEGMENT_FLAG_ENABLED 0x01 +#define V4L2_VP8_SEGMENT_FLAG_UPDATE_MAP 0x02 +#define V4L2_VP8_SEGMENT_FLAG_UPDATE_FEATURE_DATA 0x04 +#define V4L2_VP8_SEGMENT_FLAG_DELTA_VALUE_MODE 0x08 + +/** + * struct v4l2_vp8_segment - VP8 segment-based adjustments parameters + * + * @quant_update: update values for the segment quantizer. + * @lf_update: update values for the loop filter level. + * @segment_probs: branch probabilities of the segment_id decoding tree. + * @padding: padding field. Should be zeroed by applications. + * @flags: see V4L2_VP8_SEGMENT_FLAG_{}. + * + * This structure contains segment-based adjustments related parameters. + * See the 'update_segmentation()' part of the frame header syntax, + * and section '9.3. Segment-Based Adjustments' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_segment { + __s8 quant_update[4]; + __s8 lf_update[4]; + __u8 segment_probs[3]; + __u8 padding; + __u32 flags; +}; + +#define V4L2_VP8_LF_ADJ_ENABLE 0x01 +#define V4L2_VP8_LF_DELTA_UPDATE 0x02 +#define V4L2_VP8_LF_FILTER_TYPE_SIMPLE 0x04 + +/** + * struct v4l2_vp8_loop_filter - VP8 loop filter parameters + * + * @ref_frm_delta: Reference frame signed delta values. + * @mb_mode_delta: MB prediction mode signed delta values. + * @sharpness_level: matches sharpness_level syntax element. + * @level: matches loop_filter_level syntax element. + * @padding: padding field. Should be zeroed by applications. + * @flags: see V4L2_VP8_LF_FLAG_{}. + * + * This structure contains loop filter related parameters. + * See the 'mb_lf_adjustments()' part of the frame header syntax, + * and section '9.4. Loop Filter Type and Levels' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_loop_filter { + __s8 ref_frm_delta[4]; + __s8 mb_mode_delta[4]; + __u8 sharpness_level; + __u8 level; + __u16 padding; + __u32 flags; +}; + +/** + * struct v4l2_vp8_quantization - VP8 quantizattion indices + * + * @y_ac_qi: luma AC coefficient table index. + * @y_dc_delta: luma DC delta vaue. + * @y2_dc_delta: y2 block DC delta value. + * @y2_ac_delta: y2 block AC delta value. + * @uv_dc_delta: chroma DC delta value. + * @uv_ac_delta: chroma AC delta value. + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the quantization indices present + * in 'quant_indices()' part of the frame header syntax. + * See section '9.6. Dequantization Indices' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_quantization { + __u8 y_ac_qi; + __s8 y_dc_delta; + __s8 y2_dc_delta; + __s8 y2_ac_delta; + __s8 uv_dc_delta; + __s8 uv_ac_delta; + __u16 padding; +}; + +#define V4L2_VP8_COEFF_PROB_CNT 11 +#define V4L2_VP8_MV_PROB_CNT 19 + +/** + * struct v4l2_vp8_entropy - VP8 update probabilities + * + * @coeff_probs: coefficient probability update values. + * @y_mode_probs: luma intra-prediction probabilities. + * @uv_mode_probs: chroma intra-prediction probabilities. + * @mv_probs: mv decoding probability. + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the update probabilities present in + * 'token_prob_update()' and 'mv_prob_update()' part of the frame header. + * See section '17.2. Probability Updates' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_entropy { + __u8 coeff_probs[4][8][3][V4L2_VP8_COEFF_PROB_CNT]; + __u8 y_mode_probs[4]; + __u8 uv_mode_probs[3]; + __u8 mv_probs[2][V4L2_VP8_MV_PROB_CNT]; + __u8 padding[3]; +}; + +/** + * struct v4l2_vp8_entropy_coder_state - VP8 boolean coder state + * + * @range: coder state value for "Range" + * @value: coder state value for "Value" + * @bit_count: number of bits left in range "Value". + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the state for the boolean coder, as + * explained in section '7. Boolean Entropy Decoder' of the VP8 specification. + */ +struct v4l2_vp8_entropy_coder_state { + __u8 range; + __u8 value; + __u8 bit_count; + __u8 padding; +}; + +#define V4L2_VP8_FRAME_FLAG_KEY_FRAME 0x01 +#define V4L2_VP8_FRAME_FLAG_EXPERIMENTAL 0x02 +#define V4L2_VP8_FRAME_FLAG_SHOW_FRAME 0x04 +#define V4L2_VP8_FRAME_FLAG_MB_NO_SKIP_COEFF 0x08 +#define V4L2_VP8_FRAME_FLAG_SIGN_BIAS_GOLDEN 0x10 +#define V4L2_VP8_FRAME_FLAG_SIGN_BIAS_ALT 0x20 + +#define V4L2_VP8_FRAME_IS_KEY_FRAME(hdr) \ + (!!((hdr)->flags & V4L2_VP8_FRAME_FLAG_KEY_FRAME)) + +#define V4L2_CID_STATELESS_VP8_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 200) +/** + * struct v4l2_ctrl_vp8_frame - VP8 frame parameters + * + * @segment: segmentation parameters. See &v4l2_vp8_segment for more details + * @lf: loop filter parameters. See &v4l2_vp8_loop_filter for more details + * @quant: quantization parameters. See &v4l2_vp8_quantization for more details + * @entropy: update probabilities. See &v4l2_vp8_entropy for more details + * @coder_state: boolean coder state. See &v4l2_vp8_entropy_coder_state for more details + * @width: frame width. + * @height: frame height. + * @horizontal_scale: horizontal scaling factor. + * @vertical_scale: vertical scaling factor. + * @version: bitstream version. + * @prob_skip_false: frame header syntax element. + * @prob_intra: frame header syntax element. + * @prob_last: frame header syntax element. + * @prob_gf: frame header syntax element. + * @num_dct_parts: number of DCT coefficients partitions. + * @first_part_size: size of the first partition, i.e. the control partition. + * @first_part_header_bits: size in bits of the first partition header portion. + * @dct_part_sizes: DCT coefficients sizes. + * @last_frame_ts: "last" reference buffer timestamp. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @golden_frame_ts: "golden" reference buffer timestamp. + * @alt_frame_ts: "alt" reference buffer timestamp. + * @flags: see V4L2_VP8_FRAME_FLAG_{}. + */ +struct v4l2_ctrl_vp8_frame { + struct v4l2_vp8_segment segment; + struct v4l2_vp8_loop_filter lf; + struct v4l2_vp8_quantization quant; + struct v4l2_vp8_entropy entropy; + struct v4l2_vp8_entropy_coder_state coder_state; + + __u16 width; + __u16 height; + + __u8 horizontal_scale; + __u8 vertical_scale; + + __u8 version; + __u8 prob_skip_false; + __u8 prob_intra; + __u8 prob_last; + __u8 prob_gf; + __u8 num_dct_parts; + + __u32 first_part_size; + __u32 first_part_header_bits; + __u32 dct_part_sizes[8]; + + __u64 last_frame_ts; + __u64 golden_frame_ts; + __u64 alt_frame_ts; + + __u64 flags; +}; + +#define V4L2_CID_COLORIMETRY_CLASS_BASE (V4L2_CTRL_CLASS_COLORIMETRY | 0x900) +#define V4L2_CID_COLORIMETRY_CLASS (V4L2_CTRL_CLASS_COLORIMETRY | 1) + +#define V4L2_CID_COLORIMETRY_HDR10_CLL_INFO (V4L2_CID_COLORIMETRY_CLASS_BASE + 0) + +struct v4l2_ctrl_hdr10_cll_info { + __u16 max_content_light_level; + __u16 max_pic_average_light_level; +}; + +#define V4L2_CID_COLORIMETRY_HDR10_MASTERING_DISPLAY (V4L2_CID_COLORIMETRY_CLASS_BASE + 1) + +#define V4L2_HDR10_MASTERING_PRIMARIES_X_LOW 5 +#define V4L2_HDR10_MASTERING_PRIMARIES_X_HIGH 37000 +#define V4L2_HDR10_MASTERING_PRIMARIES_Y_LOW 5 +#define V4L2_HDR10_MASTERING_PRIMARIES_Y_HIGH 42000 +#define V4L2_HDR10_MASTERING_WHITE_POINT_X_LOW 5 +#define V4L2_HDR10_MASTERING_WHITE_POINT_X_HIGH 37000 +#define V4L2_HDR10_MASTERING_WHITE_POINT_Y_LOW 5 +#define V4L2_HDR10_MASTERING_WHITE_POINT_Y_HIGH 42000 +#define V4L2_HDR10_MASTERING_MAX_LUMA_LOW 50000 +#define V4L2_HDR10_MASTERING_MAX_LUMA_HIGH 100000000 +#define V4L2_HDR10_MASTERING_MIN_LUMA_LOW 1 +#define V4L2_HDR10_MASTERING_MIN_LUMA_HIGH 50000 + +struct v4l2_ctrl_hdr10_mastering_display { + __u16 display_primaries_x[3]; + __u16 display_primaries_y[3]; + __u16 white_point_x; + __u16 white_point_y; + __u32 max_display_mastering_luminance; + __u32 min_display_mastering_luminance; +}; + /* MPEG-compression definitions kept for backwards compatibility */ #ifndef __KERNEL__ #define V4L2_CTRL_CLASS_MPEG V4L2_CTRL_CLASS_CODEC diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index a38454d9e0f5..658106f5b5dc 100644 --- a/include/uapi/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h @@ -44,6 +44,7 @@ enum v4l2_subdev_format_whence { * @which: format type (from enum v4l2_subdev_format_whence) * @pad: pad number, as reported by the media API * @format: media bus format (format code and frame size) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_format { __u32 which; @@ -57,6 +58,7 @@ struct v4l2_subdev_format { * @which: format type (from enum v4l2_subdev_format_whence) * @pad: pad number, as reported by the media API * @rect: pad crop rectangle boundaries + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_crop { __u32 which; @@ -78,6 +80,7 @@ struct v4l2_subdev_crop { * @code: format code (MEDIA_BUS_FMT_ definitions) * @which: format type (from enum v4l2_subdev_format_whence) * @flags: flags set by the driver, (V4L2_SUBDEV_MBUS_CODE_*) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_mbus_code_enum { __u32 pad; @@ -90,10 +93,15 @@ struct v4l2_subdev_mbus_code_enum { /** * struct v4l2_subdev_frame_size_enum - Media bus format enumeration - * @pad: pad number, as reported by the media API * @index: format index during enumeration + * @pad: pad number, as reported by the media API * @code: format code (MEDIA_BUS_FMT_ definitions) + * @min_width: minimum frame width, in pixels + * @max_width: maximum frame width, in pixels + * @min_height: minimum frame height, in pixels + * @max_height: maximum frame height, in pixels * @which: format type (from enum v4l2_subdev_format_whence) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_size_enum { __u32 index; @@ -111,6 +119,7 @@ struct v4l2_subdev_frame_size_enum { * struct v4l2_subdev_frame_interval - Pad-level frame rate * @pad: pad number, as reported by the media API * @interval: frame interval in seconds + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_interval { __u32 pad; @@ -127,6 +136,7 @@ struct v4l2_subdev_frame_interval { * @height: frame height in pixels * @interval: frame interval in seconds * @which: format type (from enum v4l2_subdev_format_whence) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_interval_enum { __u32 index; diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 79dbde3bcf8d..311a01cc5775 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -586,6 +586,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */ #define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */ #define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */ +#define V4L2_PIX_FMT_YUV24 v4l2_fourcc('Y', 'U', 'V', '3') /* 24 YUV-8-8-8 */ #define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */ #define V4L2_PIX_FMT_AYUV32 v4l2_fourcc('A', 'Y', 'U', 'V') /* 32 AYUV-8-8-8-8 */ #define V4L2_PIX_FMT_XYUV32 v4l2_fourcc('X', 'Y', 'U', 'V') /* 32 XYUV-8-8-8-8 */ @@ -694,6 +695,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ #define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */ +#define V4L2_PIX_FMT_VP8_FRAME v4l2_fourcc('V', 'P', '8', 'F') /* VP8 parsed frame */ #define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */ #define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */ #define V4L2_PIX_FMT_FWHT v4l2_fourcc('F', 'W', 'H', 'T') /* Fast Walsh Hadamard Transform (vicodec) */ @@ -975,8 +977,10 @@ struct v4l2_requestbuffers { * pointing to this plane * @fd: when memory is V4L2_MEMORY_DMABUF, a userspace file * descriptor associated with this plane + * @m: union of @mem_offset, @userptr and @fd * @data_offset: offset in the plane to the start of data; usually 0, * unless there is a header in front of the data + * @reserved: drivers and applications must zero this array * * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer * with two planes can have one plane for Y, and another for interleaved CbCr @@ -1018,10 +1022,14 @@ struct v4l2_plane { * a userspace file descriptor associated with this buffer * @planes: for multiplanar buffers; userspace pointer to the array of plane * info structs for this buffer + * @m: union of @offset, @userptr, @planes and @fd * @length: size in bytes of the buffer (NOT its payload) for single-plane * buffers (when type != *_MPLANE); number of elements in the * planes array for multi-plane buffers + * @reserved2: drivers and applications must zero this field * @request_fd: fd of the request that this buffer should use + * @reserved: for backwards compatibility with applications that do not know + * about @request_fd * * Contains data exchanged by application and driver using one of the Streaming * I/O methods. @@ -1059,7 +1067,7 @@ struct v4l2_buffer { #ifndef __KERNEL__ /** * v4l2_timeval_to_ns - Convert timeval to nanoseconds - * @ts: pointer to the timeval variable to be converted + * @tv: pointer to the timeval variable to be converted * * Returns the scalar nanosecond representation of the timeval * parameter. @@ -1120,6 +1128,7 @@ static inline __u64 v4l2_timeval_to_ns(const struct timeval *tv) * @flags: flags for newly created file, currently only O_CLOEXEC is * supported, refer to manual of open syscall for more details * @fd: file descriptor associated with DMABUF (set by driver) + * @reserved: drivers and applications must zero this array * * Contains data used for exporting a video buffer as DMABUF file descriptor. * The buffer is identified by a 'cookie' returned by VIDIOC_QUERYBUF @@ -1737,6 +1746,7 @@ struct v4l2_ext_control { struct v4l2_ctrl_h264_slice_params __user *p_h264_slice_params; struct v4l2_ctrl_h264_decode_params __user *p_h264_decode_params; struct v4l2_ctrl_fwht_params __user *p_fwht_params; + struct v4l2_ctrl_vp8_frame __user *p_vp8_frame; void __user *ptr; }; } __attribute__ ((packed)); @@ -1784,6 +1794,9 @@ enum v4l2_ctrl_type { V4L2_CTRL_TYPE_U32 = 0x0102, V4L2_CTRL_TYPE_AREA = 0x0106, + V4L2_CTRL_TYPE_HDR10_CLL_INFO = 0x0110, + V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY = 0x0111, + V4L2_CTRL_TYPE_H264_SPS = 0x0200, V4L2_CTRL_TYPE_H264_PPS = 0x0201, V4L2_CTRL_TYPE_H264_SCALING_MATRIX = 0x0202, @@ -1792,6 +1805,8 @@ enum v4l2_ctrl_type { V4L2_CTRL_TYPE_H264_PRED_WEIGHTS = 0x0205, V4L2_CTRL_TYPE_FWHT_PARAMS = 0x0220, + + V4L2_CTRL_TYPE_VP8_FRAME = 0x0240, }; /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ @@ -2229,6 +2244,7 @@ struct v4l2_mpeg_vbi_fmt_ivtv { * this plane will be used * @bytesperline: distance in bytes between the leftmost pixels in two * adjacent lines + * @reserved: drivers and applications must zero this array */ struct v4l2_plane_pix_format { __u32 sizeimage; @@ -2247,8 +2263,10 @@ struct v4l2_plane_pix_format { * @num_planes: number of planes for this format * @flags: format flags (V4L2_PIX_FMT_FLAG_*) * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding + * @hsv_enc: enum v4l2_hsv_encoding, HSV encoding * @quantization: enum v4l2_quantization, colorspace quantization * @xfer_func: enum v4l2_xfer_func, colorspace transfer function + * @reserved: drivers and applications must zero this array */ struct v4l2_pix_format_mplane { __u32 width; @@ -2273,6 +2291,7 @@ struct v4l2_pix_format_mplane { * struct v4l2_sdr_format - SDR format definition * @pixelformat: little endian four character code (fourcc) * @buffersize: maximum size in bytes required for data + * @reserved: drivers and applications must zero this array */ struct v4l2_sdr_format { __u32 pixelformat; @@ -2299,6 +2318,8 @@ struct v4l2_meta_format { * @vbi: raw VBI capture or output parameters * @sliced: sliced VBI capture or output parameters * @raw_data: placeholder for future extensions and custom formats + * @fmt: union of @pix, @pix_mp, @win, @vbi, @sliced, @sdr, @meta + * and @raw_data */ struct v4l2_format { __u32 type; |