diff options
| author | Heiko Stübner | 2013-06-25 14:55:42 +0200 |
|---|---|---|
| committer | Linus Walleij | 2013-06-25 15:33:57 +0200 |
| commit | 70637a6dcaa6e4cb707d0d50a7ea448f13438786 (patch) | |
| tree | 744b8bbb08ada890c1befa1d4c483282391d9291 /include | |
| parent | ad42fc6c84795d19972e7f7dee70fe74bec4c2d8 (diff) | |
pinctrl: more clarifications for generic pull configs
PULL_PIN_DEFAULT is meant for hardware completely hiding any pull
settings from the driver, so that it's really only possible to turn
the pull on or off, but it not being possible to determine any
pull settings from software.
Also the binding-documentation for the pull arguments did not match
the changes to the expected values.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 10ad996afee4..48aa4ba7b089 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -41,7 +41,10 @@ * impedance to GROUND). If the argument is != 0 pull-down is enabled, * if it is 0, pull-down is total, i.e. the pin is connected to GROUND. * @PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: the pin will be pulled up or down based - * on embedded knowledge of the controller, like current mux function. + * on embedded knowledge of the controller hardware, like current mux + * function. The pull direction and possibly strength too will normally + * be decided completely inside the hardware block and not be readable + * from the kernel side. * If the argument is != 0 pull up/down is enabled, if it is 0, the * configuration is ignored. The proper way to disable it is to use * @PIN_CONFIG_BIAS_DISABLE. |