Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.19-rc1.

  Lots of tiny cleanups in here, the major stuff is:

   - termbit cleanups and unification by Ilpo. A much needed change that
     goes a long way to making things simpler for all of the different
     arches

   - tty documentation cleanups and movements to their own place in the
     documentation tree

   - old tty driver cleanups and fixes from Jiri to bring some existing
     drivers into the modern world

   - RS485 cleanups and unifications to make it easier for individual
     drivers to support this mode instead of having to duplicate logic
     in each driver

   - Lots of 8250 driver updates and additions

   - new device id additions

   - n_gsm continued fixes and cleanups

   - other minor serial driver updates and cleanups

  All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
  tty: Rework receive flow control char logic
  pcmcia: synclink_cs: Don't allow CS5-6
  serial: stm32-usart: Correct CSIZE, bits, and parity
  serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  serial: sifive: Sanitize CSIZE and c_iflag
  serial: sh-sci: Don't allow CS5-6
  serial: txx9: Don't allow CS5-6
  serial: rda-uart: Don't allow CS5-6
  serial: digicolor-usart: Don't allow CS5-6
  serial: uartlite: Fix BRKINT clearing
  serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
  Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  serial: msm_serial: disable interrupts in __msm_console_write()
  serial: meson: acquire port->lock in startup()
  serial: 8250_dw: Use dev_err_probe()
  serial: 8250_dw: Use devm_add_action_or_reset()
  ...

4 files changed, 163 insertions, 145 deletions

diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d4828e69087a..cbd5070bc87f 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -232,6 +232,7 @@ struct uart_port {
 	int			hw_stopped;		/* sw-assisted CTS flow state */
 	unsigned int		mctrl;			/* current modem ctrl settings */
 	unsigned int		timeout;		/* character-based timeout */
+	unsigned int		frame_time;		/* frame timing in ns */
 	unsigned int		type;			/* port type */
 	const struct uart_ops	*ops;
 	unsigned int		custom_divisor;
diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h
index f6c3323fc4c5..dec15f5b3dec 100644
--- a/include/linux/serial_s3c.h
+++ b/include/linux/serial_s3c.h
@@ -256,6 +256,9 @@
 #define APPLE_S5L_UCON_DEFAULT		(S3C2410_UCON_TXIRQMODE | \
 					 S3C2410_UCON_RXIRQMODE | \
 					 S3C2410_UCON_RXFIFO_TOI)
+#define APPLE_S5L_UCON_MASK		(APPLE_S5L_UCON_RXTO_ENA_MSK | \
+					 APPLE_S5L_UCON_RXTHRESH_ENA_MSK | \
+					 APPLE_S5L_UCON_TXTHRESH_ENA_MSK)
 
 #define APPLE_S5L_UTRSTAT_RXTHRESH	(1<<4)
 #define APPLE_S5L_UTRSTAT_TXTHRESH	(1<<5)
diff --git a/include/uapi/asm-generic/termbits-common.h b/include/uapi/asm-generic/termbits-common.h
new file mode 100644
index 000000000000..4d084fe8def5
--- /dev/null
+++ b/include/uapi/asm-generic/termbits-common.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_GENERIC_TERMBITS_COMMON_H
+#define __ASM_GENERIC_TERMBITS_COMMON_H
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+
+/* c_iflag bits */
+#define IGNBRK	0x001			/* Ignore break condition */
+#define BRKINT	0x002			/* Signal interrupt on break */
+#define IGNPAR	0x004			/* Ignore characters with parity errors */
+#define PARMRK	0x008			/* Mark parity and framing errors */
+#define INPCK	0x010			/* Enable input parity check */
+#define ISTRIP	0x020			/* Strip 8th bit off characters */
+#define INLCR	0x040			/* Map NL to CR on input */
+#define IGNCR	0x080			/* Ignore CR */
+#define ICRNL	0x100			/* Map CR to NL on input */
+#define IXANY	0x800			/* Any character will restart after stop */
+
+/* c_oflag bits */
+#define OPOST	0x01			/* Perform output processing */
+#define OCRNL	0x08
+#define ONOCR	0x10
+#define ONLRET	0x20
+#define OFILL	0x40
+#define OFDEL	0x80
+
+/* c_cflag bit meaning */
+/* Common CBAUD rates */
+#define     B0		0x00000000	/* hang up */
+#define    B50		0x00000001
+#define    B75		0x00000002
+#define   B110		0x00000003
+#define   B134		0x00000004
+#define   B150		0x00000005
+#define   B200		0x00000006
+#define   B300		0x00000007
+#define   B600		0x00000008
+#define  B1200		0x00000009
+#define  B1800		0x0000000a
+#define  B2400		0x0000000b
+#define  B4800		0x0000000c
+#define  B9600		0x0000000d
+#define B19200		0x0000000e
+#define B38400		0x0000000f
+#define EXTA		B19200
+#define EXTB		B38400
+
+#define CMSPAR		0x40000000	/* mark or space (stick) parity */
+#define CRTSCTS		0x80000000	/* flow control */
+
+#define IBSHIFT		16		/* Shift from CBAUD to CIBAUD */
+
+/* tcflow() ACTION argument and TCXONC use these */
+#define TCOOFF		0		/* Suspend output */
+#define TCOON		1		/* Restart suspended output */
+#define TCIOFF		2		/* Send a STOP character */
+#define TCION		3		/* Send a START character */
+
+/* tcflush() QUEUE_SELECTOR argument and TCFLSH use these */
+#define TCIFLUSH	0		/* Discard data received but not yet read */
+#define TCOFLUSH	1		/* Discard data written but not yet sent */
+#define TCIOFLUSH	2		/* Discard all pending data */
+
+#endif /* __ASM_GENERIC_TERMBITS_COMMON_H */
diff --git a/include/uapi/asm-generic/termbits.h b/include/uapi/asm-generic/termbits.h
index 2fbaf9ae89dd..890ef29053e2 100644
--- a/include/uapi/asm-generic/termbits.h
+++ b/include/uapi/asm-generic/termbits.h
@@ -2,10 +2,8 @@
 #ifndef __ASM_GENERIC_TERMBITS_H
 #define __ASM_GENERIC_TERMBITS_H
 
-#include <linux/posix_types.h>
+#include <asm-generic/termbits-common.h>
 
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
 typedef unsigned int	tcflag_t;
 
 #define NCCS 19
@@ -41,156 +39,107 @@ struct ktermios {
 };
 
 /* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
+#define VINTR		 0
+#define VQUIT		 1
+#define VERASE		 2
+#define VKILL		 3
+#define VEOF		 4
+#define VTIME		 5
+#define VMIN		 6
+#define VSWTC		 7
+#define VSTART		 8
+#define VSTOP		 9
+#define VSUSP		10
+#define VEOL		11
+#define VREPRINT	12
+#define VDISCARD	13
+#define VWERASE		14
+#define VLNEXT		15
+#define VEOL2		16
 
 /* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
+#define IUCLC	0x0200
+#define IXON	0x0400
+#define IXOFF	0x1000
+#define IMAXBEL	0x2000
+#define IUTF8	0x4000
 
 /* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
+#define OLCUC	0x00002
+#define ONLCR	0x00004
+#define NLDLY	0x00100
+#define   NL0	0x00000
+#define   NL1	0x00100
+#define CRDLY	0x00600
+#define   CR0	0x00000
+#define   CR1	0x00200
+#define   CR2	0x00400
+#define   CR3	0x00600
+#define TABDLY	0x01800
+#define   TAB0	0x00000
+#define   TAB1	0x00800
+#define   TAB2	0x01000
+#define   TAB3	0x01800
+#define   XTABS	0x01800
+#define BSDLY	0x02000
+#define   BS0	0x00000
+#define   BS1	0x02000
+#define VTDLY	0x04000
+#define   VT0	0x00000
+#define   VT1	0x04000
+#define FFDLY	0x08000
+#define   FF0	0x00000
+#define   FF1	0x08000
 
 /* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate */
-#define CMSPAR	  010000000000	/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000	/* flow control */
-
-#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+#define CBAUD		0x0000100f
+#define CSIZE		0x00000030
+#define   CS5		0x00000000
+#define   CS6		0x00000010
+#define   CS7		0x00000020
+#define   CS8		0x00000030
+#define CSTOPB		0x00000040
+#define CREAD		0x00000080
+#define PARENB		0x00000100
+#define PARODD		0x00000200
+#define HUPCL		0x00000400
+#define CLOCAL		0x00000800
+#define CBAUDEX		0x00001000
+#define BOTHER		0x00001000
+#define     B57600	0x00001001
+#define    B115200	0x00001002
+#define    B230400	0x00001003
+#define    B460800	0x00001004
+#define    B500000	0x00001005
+#define    B576000	0x00001006
+#define    B921600	0x00001007
+#define   B1000000	0x00001008
+#define   B1152000	0x00001009
+#define   B1500000	0x0000100a
+#define   B2000000	0x0000100b
+#define   B2500000	0x0000100c
+#define   B3000000	0x0000100d
+#define   B3500000	0x0000100e
+#define   B4000000	0x0000100f
+#define CIBAUD		0x100f0000	/* input baud rate */
 
 /* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-#define EXTPROC	0200000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
+#define ISIG	0x00001
+#define ICANON	0x00002
+#define XCASE	0x00004
+#define ECHO	0x00008
+#define ECHOE	0x00010
+#define ECHOK	0x00020
+#define ECHONL	0x00040
+#define NOFLSH	0x00080
+#define TOSTOP	0x00100
+#define ECHOCTL	0x00200
+#define ECHOPRT	0x00400
+#define ECHOKE	0x00800
+#define FLUSHO	0x01000
+#define PENDIN	0x04000
+#define IEXTEN	0x08000
+#define EXTPROC	0x10000
 
 /* tcsetattr uses these */
 #define	TCSANOW		0