Merge tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "General updates:
   - Cleanups and additional flash support for "dataflash" driver
   - new driver for mchp23k256 SPI SRAM device
   - improve handling of MTDs without eraseblocks (i.e., MTD_NO_ERASE)
   - refactor and improve "sub-partition" handling with TRX partition
     parser; partitions can now be created as sub-partitions of another
     partition

  SPINOR updates, from Cyrille Pitchen and Marek Vasut:
   - introduce support to the SPI 1-2-2 and 1-4-4 protocols.
   - introduce support to the Double Data Rate (DDR) mode.
   - introduce support to the Octo SPI protocols.
   - add support to new memory parts for Spansion, Macronix and Winbond.
   - add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers.
   - clean up the st_spi_fsm driver.

  NAND updates, from Boris Brezillon:
   - addition of on-die ECC support to Micron driver
   - addition of helpers to help drivers choose most appropriate ECC
     settings
   - deletion of dead-code (cached programming and ->errstat() hook)
   - make sure drivers that do not support the SET/GET FEATURES command
     return ENOTSUPP use a dummy ->set/get_features implementation
     returning -ENOTSUPP (required for Micron on-die ECC)
   - change the semantic of ecc->write_page() for drivers setting the
     NAND_ECC_CUSTOM_PAGE_ACCESS flag
   - support exiting 'GET STATUS' command in default ->cmdfunc()
     implementations
   - change the prototype of ->setup_data_interface()

  A bunch of driver related changes:
   - various cleanup, fixes and improvements of the MTK driver
   - OMAP DT bindings fixes
   - support for ->setup_data_interface() in the fsmc driver
   - support for imx7 in the gpmi driver
   - finalization of the denali driver rework (thanks to Masahiro for
     the work he's done on this driver)
   - fix "bitflips in erased pages" handling in the ifc driver
   - addition of PM ops and dynamic timing configuration to the atmel
     driver"

* tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd: (118 commits)
  Documentation: ABI: mtd: describe "offset" more precisely
  mtd: Fix check in mtd_unpoint()
  mtd: nand: mtk: release lock on error path
  mtd: st_spi_fsm: remove SPINOR_OP_RDSR2 and use SPINOR_OP_RDCR instead
  mtd: spi-nor: cqspi: remove duplicate const
  mtd: spi-nor: Add support for Spansion S25FL064L
  mtd: spi-nor: Add support for mx66u51235f
  mtd: nand: mtk: add ->setup_data_interface() hook
  mtd: nand: mtk: remove unneeded mtk_ecc_hw_init from mtk_ecc_resume
  mtd: nand: mtk: remove unneeded mtk_nfc_hw_init from mtk_nfc_resume
  mtd: nand: mtk: disable ecc irq when writing page with hwecc
  mtd: nand: mtk: fix incorrect register setting order about ecc irq
  mtd: partitions: fixup some allocate_partition() whitespace
  mtd: parsers: trx: fix pr_err format for printing offset
  MAINTAINERS: Update SPI NOR subsystem git repositories
  mtd: extract TRX parser out of bcm47xxpart into a separated module
  mtd: partitions: add support for partition parsers
  mtd: partitions: add support for subpartitions
  mtd: partitions: rename "master" to the "parent" where appropriate
  mtd: partitions: remove sysfs files when deleting all master's partitions
  ...

3 files changed, 230 insertions, 18 deletions

diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index de0d889e4fe1..892148c448cc 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -107,6 +107,8 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
 #define NAND_STATUS_READY	0x40
 #define NAND_STATUS_WP		0x80
 
+#define NAND_DATA_IFACE_CHECK_ONLY	-1
+
 /*
  * Constants for ECC_MODES
  */
@@ -116,6 +118,7 @@ typedef enum {
 	NAND_ECC_HW,
 	NAND_ECC_HW_SYNDROME,
 	NAND_ECC_HW_OOB_FIRST,
+	NAND_ECC_ON_DIE,
 } nand_ecc_modes_t;
 
 enum nand_ecc_algo {
@@ -257,6 +260,8 @@ struct nand_chip;
 
 /* Vendor-specific feature address (Micron) */
 #define ONFI_FEATURE_ADDR_READ_RETRY	0x89
+#define ONFI_FEATURE_ON_DIE_ECC		0x90
+#define   ONFI_FEATURE_ON_DIE_ECC_EN	BIT(3)
 
 /* ONFI subfeature parameters length */
 #define ONFI_SUBFEATURE_PARAM_LEN	4
@@ -477,6 +482,44 @@ static inline void nand_hw_control_init(struct nand_hw_control *nfc)
 }
 
 /**
+ * struct nand_ecc_step_info - ECC step information of ECC engine
+ * @stepsize: data bytes per ECC step
+ * @strengths: array of supported strengths
+ * @nstrengths: number of supported strengths
+ */
+struct nand_ecc_step_info {
+	int stepsize;
+	const int *strengths;
+	int nstrengths;
+};
+
+/**
+ * struct nand_ecc_caps - capability of ECC engine
+ * @stepinfos: array of ECC step information
+ * @nstepinfos: number of ECC step information
+ * @calc_ecc_bytes: driver's hook to calculate ECC bytes per step
+ */
+struct nand_ecc_caps {
+	const struct nand_ecc_step_info *stepinfos;
+	int nstepinfos;
+	int (*calc_ecc_bytes)(int step_size, int strength);
+};
+
+/* a shorthand to generate struct nand_ecc_caps with only one ECC stepsize */
+#define NAND_ECC_CAPS_SINGLE(__name, __calc, __step, ...)	\
+static const int __name##_strengths[] = { __VA_ARGS__ };	\
+static const struct nand_ecc_step_info __name##_stepinfo = {	\
+	.stepsize = __step,					\
+	.strengths = __name##_strengths,			\
+	.nstrengths = ARRAY_SIZE(__name##_strengths),		\
+};								\
+static const struct nand_ecc_caps __name = {			\
+	.stepinfos = &__name##_stepinfo,			\
+	.nstepinfos = 1,					\
+	.calc_ecc_bytes = __calc,				\
+}
+
+/**
  * struct nand_ecc_ctrl - Control structure for ECC
  * @mode:	ECC mode
  * @algo:	ECC algorithm
@@ -815,7 +858,10 @@ struct nand_manufacturer_ops {
  * @read_retries:	[INTERN] the number of read retry modes supported
  * @onfi_set_features:	[REPLACEABLE] set the features for ONFI nand
  * @onfi_get_features:	[REPLACEABLE] get the features for ONFI nand
- * @setup_data_interface: [OPTIONAL] setup the data interface and timing
+ * @setup_data_interface: [OPTIONAL] setup the data interface and timing. If
+ *			  chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this
+ *			  means the configuration should not be applied but
+ *			  only checked.
  * @bbt:		[INTERN] bad block table pointer
  * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash
  *			lookup.
@@ -826,9 +872,6 @@ struct nand_manufacturer_ops {
  *			structure which is shared among multiple independent
  *			devices.
  * @priv:		[OPTIONAL] pointer to private chip data
- * @errstat:		[OPTIONAL] hardware specific function to perform
- *			additional error status checks (determine if errors are
- *			correctable).
  * @manufacturer:	[INTERN] Contains manufacturer information
  */
 
@@ -852,16 +895,13 @@ struct nand_chip {
 	int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
 	int (*erase)(struct mtd_info *mtd, int page);
 	int (*scan_bbt)(struct mtd_info *mtd);
-	int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
-			int status, int page);
 	int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
 			int feature_addr, uint8_t *subfeature_para);
 	int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
 			int feature_addr, uint8_t *subfeature_para);
 	int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode);
-	int (*setup_data_interface)(struct mtd_info *mtd,
-				    const struct nand_data_interface *conf,
-				    bool check_only);
+	int (*setup_data_interface)(struct mtd_info *mtd, int chipnr,
+				    const struct nand_data_interface *conf);
 
 
 	int chip_delay;
@@ -1244,6 +1284,15 @@ int nand_check_erased_ecc_chunk(void *data, int datalen,
 				void *extraoob, int extraooblen,
 				int threshold);
 
+int nand_check_ecc_caps(struct nand_chip *chip,
+			const struct nand_ecc_caps *caps, int oobavail);
+
+int nand_match_ecc_req(struct nand_chip *chip,
+		       const struct nand_ecc_caps *caps,  int oobavail);
+
+int nand_maximize_ecc(struct nand_chip *chip,
+		      const struct nand_ecc_caps *caps, int oobavail);
+
 /* Default write_oob implementation */
 int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
 
@@ -1258,6 +1307,19 @@ int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
 int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 			   int page);
 
+/* Stub used by drivers that do not support GET/SET FEATURES operations */
+int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd,
+				       struct nand_chip *chip, int addr,
+				       u8 *subfeature_param);
+
+/* Default read_page_raw implementation */
+int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+		       uint8_t *buf, int oob_required, int page);
+
+/* Default write_page_raw implementation */
+int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+			const uint8_t *buf, int oob_required, int page);
+
 /* Reset and initialize a NAND device */
 int nand_reset(struct nand_chip *chip, int chipnr);
 
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 06df1e06b6e0..c4beb70dacbd 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -20,6 +20,12 @@
  *
  * For each partition, these fields are available:
  * name: string that will be used to label the partition's MTD device.
+ * types: some partitions can be containers using specific format to describe
+ *	embedded subpartitions / volumes. E.g. many home routers use "firmware"
+ *	partition that contains at least kernel and rootfs. In such case an
+ *	extra parser is needed that will detect these dynamic partitions and
+ *	report them to the MTD subsystem. If set this property stores an array
+ *	of parser names to use when looking for subpartitions.
  * size: the partition size; if defined as MTDPART_SIZ_FULL, the partition
  * 	will extend to the end of the master MTD device.
  * offset: absolute starting position within the master MTD device; if
@@ -38,6 +44,7 @@
 
 struct mtd_partition {
 	const char *name;		/* identifier string */
+	const char *const *types;	/* names of parsers to use if any */
 	uint64_t size;			/* partition size */
 	uint64_t offset;		/* offset within the master MTD space */
 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index f2a718030476..55faa2f07cca 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -73,6 +73,15 @@
 #define SPINOR_OP_BE_32K_4B	0x5c	/* Erase 32KiB block */
 #define SPINOR_OP_SE_4B		0xdc	/* Sector erase (usually 64KiB) */
 
+/* Double Transfer Rate opcodes - defined in JEDEC JESD216B. */
+#define SPINOR_OP_READ_1_1_1_DTR	0x0d
+#define SPINOR_OP_READ_1_2_2_DTR	0xbd
+#define SPINOR_OP_READ_1_4_4_DTR	0xed
+
+#define SPINOR_OP_READ_1_1_1_DTR_4B	0x0e
+#define SPINOR_OP_READ_1_2_2_DTR_4B	0xbe
+#define SPINOR_OP_READ_1_4_4_DTR_4B	0xee
+
 /* Used for SST flashes only. */
 #define SPINOR_OP_BP		0x02	/* Byte program */
 #define SPINOR_OP_WRDI		0x04	/* Write disable */
@@ -119,13 +128,81 @@
 /* Configuration Register bits. */
 #define CR_QUAD_EN_SPAN		BIT(1)	/* Spansion Quad I/O */
 
-enum read_mode {
-	SPI_NOR_NORMAL = 0,
-	SPI_NOR_FAST,
-	SPI_NOR_DUAL,
-	SPI_NOR_QUAD,
+/* Supported SPI protocols */
+#define SNOR_PROTO_INST_MASK	GENMASK(23, 16)
+#define SNOR_PROTO_INST_SHIFT	16
+#define SNOR_PROTO_INST(_nbits)	\
+	((((unsigned long)(_nbits)) << SNOR_PROTO_INST_SHIFT) & \
+	 SNOR_PROTO_INST_MASK)
+
+#define SNOR_PROTO_ADDR_MASK	GENMASK(15, 8)
+#define SNOR_PROTO_ADDR_SHIFT	8
+#define SNOR_PROTO_ADDR(_nbits)	\
+	((((unsigned long)(_nbits)) << SNOR_PROTO_ADDR_SHIFT) & \
+	 SNOR_PROTO_ADDR_MASK)
+
+#define SNOR_PROTO_DATA_MASK	GENMASK(7, 0)
+#define SNOR_PROTO_DATA_SHIFT	0
+#define SNOR_PROTO_DATA(_nbits)	\
+	((((unsigned long)(_nbits)) << SNOR_PROTO_DATA_SHIFT) & \
+	 SNOR_PROTO_DATA_MASK)
+
+#define SNOR_PROTO_IS_DTR	BIT(24)	/* Double Transfer Rate */
+
+#define SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits)	\
+	(SNOR_PROTO_INST(_inst_nbits) |				\
+	 SNOR_PROTO_ADDR(_addr_nbits) |				\
+	 SNOR_PROTO_DATA(_data_nbits))
+#define SNOR_PROTO_DTR(_inst_nbits, _addr_nbits, _data_nbits)	\
+	(SNOR_PROTO_IS_DTR |					\
+	 SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits))
+
+enum spi_nor_protocol {
+	SNOR_PROTO_1_1_1 = SNOR_PROTO_STR(1, 1, 1),
+	SNOR_PROTO_1_1_2 = SNOR_PROTO_STR(1, 1, 2),
+	SNOR_PROTO_1_1_4 = SNOR_PROTO_STR(1, 1, 4),
+	SNOR_PROTO_1_1_8 = SNOR_PROTO_STR(1, 1, 8),
+	SNOR_PROTO_1_2_2 = SNOR_PROTO_STR(1, 2, 2),
+	SNOR_PROTO_1_4_4 = SNOR_PROTO_STR(1, 4, 4),
+	SNOR_PROTO_1_8_8 = SNOR_PROTO_STR(1, 8, 8),
+	SNOR_PROTO_2_2_2 = SNOR_PROTO_STR(2, 2, 2),
+	SNOR_PROTO_4_4_4 = SNOR_PROTO_STR(4, 4, 4),
+	SNOR_PROTO_8_8_8 = SNOR_PROTO_STR(8, 8, 8),
+
+	SNOR_PROTO_1_1_1_DTR = SNOR_PROTO_DTR(1, 1, 1),
+	SNOR_PROTO_1_2_2_DTR = SNOR_PROTO_DTR(1, 2, 2),
+	SNOR_PROTO_1_4_4_DTR = SNOR_PROTO_DTR(1, 4, 4),
+	SNOR_PROTO_1_8_8_DTR = SNOR_PROTO_DTR(1, 8, 8),
 };
 
+static inline bool spi_nor_protocol_is_dtr(enum spi_nor_protocol proto)
+{
+	return !!(proto & SNOR_PROTO_IS_DTR);
+}
+
+static inline u8 spi_nor_get_protocol_inst_nbits(enum spi_nor_protocol proto)
+{
+	return ((unsigned long)(proto & SNOR_PROTO_INST_MASK)) >>
+		SNOR_PROTO_INST_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_addr_nbits(enum spi_nor_protocol proto)
+{
+	return ((unsigned long)(proto & SNOR_PROTO_ADDR_MASK)) >>
+		SNOR_PROTO_ADDR_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_data_nbits(enum spi_nor_protocol proto)
+{
+	return ((unsigned long)(proto & SNOR_PROTO_DATA_MASK)) >>
+		SNOR_PROTO_DATA_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto)
+{
+	return spi_nor_get_protocol_data_nbits(proto);
+}
+
 #define SPI_NOR_MAX_CMD_SIZE	8
 enum spi_nor_ops {
 	SPI_NOR_OPS_READ = 0,
@@ -154,9 +231,11 @@ enum spi_nor_option_flags {
  * @read_opcode:	the read opcode
  * @read_dummy:		the dummy needed by the read operation
  * @program_opcode:	the program opcode
- * @flash_read:		the mode of the read
  * @sst_write_second:	used by the SST write operation
  * @flags:		flag options for the current SPI-NOR (SNOR_F_*)
+ * @read_proto:		the SPI protocol for read operations
+ * @write_proto:	the SPI protocol for write operations
+ * @reg_proto		the SPI protocol for read_reg/write_reg/erase operations
  * @cmd_buf:		used by the write_reg
  * @prepare:		[OPTIONAL] do some preparations for the
  *			read/write/erase/lock/unlock operations
@@ -185,7 +264,9 @@ struct spi_nor {
 	u8			read_opcode;
 	u8			read_dummy;
 	u8			program_opcode;
-	enum read_mode		flash_read;
+	enum spi_nor_protocol	read_proto;
+	enum spi_nor_protocol	write_proto;
+	enum spi_nor_protocol	reg_proto;
 	bool			sst_write_second;
 	u32			flags;
 	u8			cmd_buf[SPI_NOR_MAX_CMD_SIZE];
@@ -220,10 +301,71 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
 }
 
 /**
+ * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
+ * supported by the SPI controller (bus master).
+ * @mask:		the bitmask listing all the supported hw capabilies
+ */
+struct spi_nor_hwcaps {
+	u32	mask;
+};
+
+/*
+ *(Fast) Read capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * As a matter of performances, it is relevant to use Octo SPI protocols first,
+ * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
+ * (Slow) Read.
+ */
+#define SNOR_HWCAPS_READ_MASK		GENMASK(14, 0)
+#define SNOR_HWCAPS_READ		BIT(0)
+#define SNOR_HWCAPS_READ_FAST		BIT(1)
+#define SNOR_HWCAPS_READ_1_1_1_DTR	BIT(2)
+
+#define SNOR_HWCAPS_READ_DUAL		GENMASK(6, 3)
+#define SNOR_HWCAPS_READ_1_1_2		BIT(3)
+#define SNOR_HWCAPS_READ_1_2_2		BIT(4)
+#define SNOR_HWCAPS_READ_2_2_2		BIT(5)
+#define SNOR_HWCAPS_READ_1_2_2_DTR	BIT(6)
+
+#define SNOR_HWCAPS_READ_QUAD		GENMASK(10, 7)
+#define SNOR_HWCAPS_READ_1_1_4		BIT(7)
+#define SNOR_HWCAPS_READ_1_4_4		BIT(8)
+#define SNOR_HWCAPS_READ_4_4_4		BIT(9)
+#define SNOR_HWCAPS_READ_1_4_4_DTR	BIT(10)
+
+#define SNOR_HWCPAS_READ_OCTO		GENMASK(14, 11)
+#define SNOR_HWCAPS_READ_1_1_8		BIT(11)
+#define SNOR_HWCAPS_READ_1_8_8		BIT(12)
+#define SNOR_HWCAPS_READ_8_8_8		BIT(13)
+#define SNOR_HWCAPS_READ_1_8_8_DTR	BIT(14)
+
+/*
+ * Page Program capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * Like (Fast) Read capabilities, Octo/Quad SPI protocols are preferred to the
+ * legacy SPI 1-1-1 protocol.
+ * Note that Dual Page Programs are not supported because there is no existing
+ * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
+ * implements such commands.
+ */
+#define SNOR_HWCAPS_PP_MASK	GENMASK(22, 16)
+#define SNOR_HWCAPS_PP		BIT(16)
+
+#define SNOR_HWCAPS_PP_QUAD	GENMASK(19, 17)
+#define SNOR_HWCAPS_PP_1_1_4	BIT(17)
+#define SNOR_HWCAPS_PP_1_4_4	BIT(18)
+#define SNOR_HWCAPS_PP_4_4_4	BIT(19)
+
+#define SNOR_HWCAPS_PP_OCTO	GENMASK(22, 20)
+#define SNOR_HWCAPS_PP_1_1_8	BIT(20)
+#define SNOR_HWCAPS_PP_1_8_8	BIT(21)
+#define SNOR_HWCAPS_PP_8_8_8	BIT(22)
+
+/**
  * spi_nor_scan() - scan the SPI NOR
  * @nor:	the spi_nor structure
  * @name:	the chip type name
- * @mode:	the read mode supported by the driver
+ * @hwcaps:	the hardware capabilities supported by the controller driver
  *
  * The drivers can use this fuction to scan the SPI NOR.
  * In the scanning, it will try to get all the necessary information to
@@ -233,6 +375,7 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
  *
  * Return: 0 for success, others for failure.
  */
-int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode);
+int spi_nor_scan(struct spi_nor *nor, const char *name,
+		 const struct spi_nor_hwcaps *hwcaps);
 
 #endif