Merge tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB driver update for 4.8-rc1.  Lots of the normal
  stuff in here, musb, gadget, xhci, and other updates and fixes.  All
  of the details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
  cdc-acm: beautify probe()
  cdc-wdm: use the common CDC parser
  cdc-acm: cleanup error handling
  cdc-acm: use the common parser
  usbnet: move the CDC parser into USB core
  usb: musb: sunxi: Simplify dr_mode handling
  usb: musb: sunxi: make unexported symbols static
  usb: musb: cppi41: add dma channel tracepoints
  usb: musb: cppi41: move struct cppi41_dma_channel to header
  usb: musb: cleanup cppi_dma header
  usb: musb: gadget: add usb-request tracepoints
  usb: musb: host: add urb tracepoints
  usb: musb: add tracepoints to dump interrupt events
  usb: musb: add tracepoints for register access
  usb: musb: dsps: use musb register read/write wrappers instead
  usb: musb: switch dev_dbg to tracepoints
  usb: musb: add tracepoints support for debugging
  usb: quirks: Add no-lpm quirk for Elan
  phy: rcar-gen3-usb2: fix mutex_lock calling in interrupt
  phy: rockhip-usb: use devm_add_action_or_reset()
  ...

5 files changed, 83 insertions, 754 deletions

diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index a810f2a18842..f08b67238b58 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -22,12 +22,20 @@
 
 struct phy;
 
+enum phy_mode {
+	PHY_MODE_INVALID,
+	PHY_MODE_USB_HOST,
+	PHY_MODE_USB_DEVICE,
+	PHY_MODE_USB_OTG,
+};
+
 /**
  * struct phy_ops - set of function pointers for performing phy operations
  * @init: operation to be performed for initializing phy
  * @exit: operation to be performed while exiting
  * @power_on: powering on the phy
  * @power_off: powering off the phy
+ * @set_mode: set the mode of the phy
  * @owner: the module owner containing the ops
  */
 struct phy_ops {
@@ -35,6 +43,7 @@ struct phy_ops {
 	int	(*exit)(struct phy *phy);
 	int	(*power_on)(struct phy *phy);
 	int	(*power_off)(struct phy *phy);
+	int	(*set_mode)(struct phy *phy, enum phy_mode mode);
 	struct module *owner;
 };
 
@@ -126,6 +135,7 @@ int phy_init(struct phy *phy);
 int phy_exit(struct phy *phy);
 int phy_power_on(struct phy *phy);
 int phy_power_off(struct phy *phy);
+int phy_set_mode(struct phy *phy, enum phy_mode mode);
 static inline int phy_get_bus_width(struct phy *phy)
 {
 	return phy->attrs.bus_width;
@@ -233,6 +243,13 @@ static inline int phy_power_off(struct phy *phy)
 	return -ENOSYS;
 }
 
+static inline int phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
 static inline int phy_get_bus_width(struct phy *phy)
 {
 	return -ENOSYS;
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index fefe8b06a63d..612dbdfa388e 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -25,6 +25,8 @@
 #include <linux/workqueue.h>
 #include <linux/usb/ch9.h>
 
+#define UDC_TRACE_STR_MAX	512
+
 struct usb_ep;
 
 /**
@@ -228,307 +230,49 @@ struct usb_ep {
 
 /*-------------------------------------------------------------------------*/
 
-/**
- * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint
- * @ep:the endpoint being configured
- * @maxpacket_limit:value of maximum packet size limit
- *
- * This function should be used only in UDC drivers to initialize endpoint
- * (usually in probe function).
- */
+#if IS_ENABLED(CONFIG_USB_GADGET)
+void usb_ep_set_maxpacket_limit(struct usb_ep *ep, unsigned maxpacket_limit);
+int usb_ep_enable(struct usb_ep *ep);
+int usb_ep_disable(struct usb_ep *ep);
+struct usb_request *usb_ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+void usb_ep_free_request(struct usb_ep *ep, struct usb_request *req);
+int usb_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags);
+int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req);
+int usb_ep_set_halt(struct usb_ep *ep);
+int usb_ep_clear_halt(struct usb_ep *ep);
+int usb_ep_set_wedge(struct usb_ep *ep);
+int usb_ep_fifo_status(struct usb_ep *ep);
+void usb_ep_fifo_flush(struct usb_ep *ep);
+#else
 static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
-					      unsigned maxpacket_limit)
-{
-	ep->maxpacket_limit = maxpacket_limit;
-	ep->maxpacket = maxpacket_limit;
-}
-
-/**
- * usb_ep_enable - configure endpoint, making it usable
- * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
- *	drivers discover endpoints through the ep_list of a usb_gadget.
- *
- * When configurations are set, or when interface settings change, the driver
- * will enable or disable the relevant endpoints.  while it is enabled, an
- * endpoint may be used for i/o until the driver receives a disconnect() from
- * the host or until the endpoint is disabled.
- *
- * the ep0 implementation (which calls this routine) must ensure that the
- * hardware capabilities of each endpoint match the descriptor provided
- * for it.  for example, an endpoint named "ep2in-bulk" would be usable
- * for interrupt transfers as well as bulk, but it likely couldn't be used
- * for iso transfers or for endpoint 14.  some endpoints are fully
- * configurable, with more generic names like "ep-a".  (remember that for
- * USB, "in" means "towards the USB master".)
- *
- * returns zero, or a negative error code.
- */
+		unsigned maxpacket_limit)
+{ }
 static inline int usb_ep_enable(struct usb_ep *ep)
-{
-	int ret;
-
-	if (ep->enabled)
-		return 0;
-
-	ret = ep->ops->enable(ep, ep->desc);
-	if (ret)
-		return ret;
-
-	ep->enabled = true;
-
-	return 0;
-}
-
-/**
- * usb_ep_disable - endpoint is no longer usable
- * @ep:the endpoint being unconfigured.  may not be the endpoint named "ep0".
- *
- * no other task may be using this endpoint when this is called.
- * any pending and uncompleted requests will complete with status
- * indicating disconnect (-ESHUTDOWN) before this call returns.
- * gadget drivers must call usb_ep_enable() again before queueing
- * requests to the endpoint.
- *
- * returns zero, or a negative error code.
- */
+{ return 0; }
 static inline int usb_ep_disable(struct usb_ep *ep)
-{
-	int ret;
-
-	if (!ep->enabled)
-		return 0;
-
-	ret = ep->ops->disable(ep);
-	if (ret)
-		return ret;
-
-	ep->enabled = false;
-
-	return 0;
-}
-
-/**
- * usb_ep_alloc_request - allocate a request object to use with this endpoint
- * @ep:the endpoint to be used with with the request
- * @gfp_flags:GFP_* flags to use
- *
- * Request objects must be allocated with this call, since they normally
- * need controller-specific setup and may even need endpoint-specific
- * resources such as allocation of DMA descriptors.
- * Requests may be submitted with usb_ep_queue(), and receive a single
- * completion callback.  Free requests with usb_ep_free_request(), when
- * they are no longer needed.
- *
- * Returns the request, or null if one could not be allocated.
- */
+{ return 0; }
 static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
-						       gfp_t gfp_flags)
-{
-	return ep->ops->alloc_request(ep, gfp_flags);
-}
-
-/**
- * usb_ep_free_request - frees a request object
- * @ep:the endpoint associated with the request
- * @req:the request being freed
- *
- * Reverses the effect of usb_ep_alloc_request().
- * Caller guarantees the request is not queued, and that it will
- * no longer be requeued (or otherwise used).
- */
+		gfp_t gfp_flags)
+{ return NULL; }
 static inline void usb_ep_free_request(struct usb_ep *ep,
-				       struct usb_request *req)
-{
-	ep->ops->free_request(ep, req);
-}
-
-/**
- * usb_ep_queue - queues (submits) an I/O request to an endpoint.
- * @ep:the endpoint associated with the request
- * @req:the request being submitted
- * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
- *	pre-allocate all necessary memory with the request.
- *
- * This tells the device controller to perform the specified request through
- * that endpoint (reading or writing a buffer).  When the request completes,
- * including being canceled by usb_ep_dequeue(), the request's completion
- * routine is called to return the request to the driver.  Any endpoint
- * (except control endpoints like ep0) may have more than one transfer
- * request queued; they complete in FIFO order.  Once a gadget driver
- * submits a request, that request may not be examined or modified until it
- * is given back to that driver through the completion callback.
- *
- * Each request is turned into one or more packets.  The controller driver
- * never merges adjacent requests into the same packet.  OUT transfers
- * will sometimes use data that's already buffered in the hardware.
- * Drivers can rely on the fact that the first byte of the request's buffer
- * always corresponds to the first byte of some USB packet, for both
- * IN and OUT transfers.
- *
- * Bulk endpoints can queue any amount of data; the transfer is packetized
- * automatically.  The last packet will be short if the request doesn't fill it
- * out completely.  Zero length packets (ZLPs) should be avoided in portable
- * protocols since not all usb hardware can successfully handle zero length
- * packets.  (ZLPs may be explicitly written, and may be implicitly written if
- * the request 'zero' flag is set.)  Bulk endpoints may also be used
- * for interrupt transfers; but the reverse is not true, and some endpoints
- * won't support every interrupt transfer.  (Such as 768 byte packets.)
- *
- * Interrupt-only endpoints are less functional than bulk endpoints, for
- * example by not supporting queueing or not handling buffers that are
- * larger than the endpoint's maxpacket size.  They may also treat data
- * toggle differently.
- *
- * Control endpoints ... after getting a setup() callback, the driver queues
- * one response (even if it would be zero length).  That enables the
- * status ack, after transferring data as specified in the response.  Setup
- * functions may return negative error codes to generate protocol stalls.
- * (Note that some USB device controllers disallow protocol stall responses
- * in some cases.)  When control responses are deferred (the response is
- * written after the setup callback returns), then usb_ep_set_halt() may be
- * used on ep0 to trigger protocol stalls.  Depending on the controller,
- * it may not be possible to trigger a status-stage protocol stall when the
- * data stage is over, that is, from within the response's completion
- * routine.
- *
- * For periodic endpoints, like interrupt or isochronous ones, the usb host
- * arranges to poll once per interval, and the gadget driver usually will
- * have queued some data to transfer at that time.
- *
- * Returns zero, or a negative error code.  Endpoints that are not enabled
- * report errors; errors will also be
- * reported when the usb peripheral is disconnected.
- */
-static inline int usb_ep_queue(struct usb_ep *ep,
-			       struct usb_request *req, gfp_t gfp_flags)
-{
-	if (WARN_ON_ONCE(!ep->enabled && ep->address))
-		return -ESHUTDOWN;
-
-	return ep->ops->queue(ep, req, gfp_flags);
-}
-
-/**
- * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
- * @ep:the endpoint associated with the request
- * @req:the request being canceled
- *
- * If the request is still active on the endpoint, it is dequeued and its
- * completion routine is called (with status -ECONNRESET); else a negative
- * error code is returned. This is guaranteed to happen before the call to
- * usb_ep_dequeue() returns.
- *
- * Note that some hardware can't clear out write fifos (to unlink the request
- * at the head of the queue) except as part of disconnecting from usb. Such
- * restrictions prevent drivers from supporting configuration changes,
- * even to configuration zero (a "chapter 9" requirement).
- */
+		struct usb_request *req)
+{ }
+static inline int usb_ep_queue(struct usb_ep *ep, struct usb_request *req,
+		gfp_t gfp_flags)
+{ return 0; }
 static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
-{
-	return ep->ops->dequeue(ep, req);
-}
-
-/**
- * usb_ep_set_halt - sets the endpoint halt feature.
- * @ep: the non-isochronous endpoint being stalled
- *
- * Use this to stall an endpoint, perhaps as an error report.
- * Except for control endpoints,
- * the endpoint stays halted (will not stream any data) until the host
- * clears this feature; drivers may need to empty the endpoint's request
- * queue first, to make sure no inappropriate transfers happen.
- *
- * Note that while an endpoint CLEAR_FEATURE will be invisible to the
- * gadget driver, a SET_INTERFACE will not be.  To reset endpoints for the
- * current altsetting, see usb_ep_clear_halt().  When switching altsettings,
- * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
- *
- * Returns zero, or a negative error code.  On success, this call sets
- * underlying hardware state that blocks data transfers.
- * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
- * transfer requests are still queued, or if the controller hardware
- * (usually a FIFO) still holds bytes that the host hasn't collected.
- */
+{ return 0; }
 static inline int usb_ep_set_halt(struct usb_ep *ep)
-{
-	return ep->ops->set_halt(ep, 1);
-}
-
-/**
- * usb_ep_clear_halt - clears endpoint halt, and resets toggle
- * @ep:the bulk or interrupt endpoint being reset
- *
- * Use this when responding to the standard usb "set interface" request,
- * for endpoints that aren't reconfigured, after clearing any other state
- * in the endpoint's i/o queue.
- *
- * Returns zero, or a negative error code.  On success, this call clears
- * the underlying hardware state reflecting endpoint halt and data toggle.
- * Note that some hardware can't support this request (like pxa2xx_udc),
- * and accordingly can't correctly implement interface altsettings.
- */
+{ return 0; }
 static inline int usb_ep_clear_halt(struct usb_ep *ep)
-{
-	return ep->ops->set_halt(ep, 0);
-}
-
-/**
- * usb_ep_set_wedge - sets the halt feature and ignores clear requests
- * @ep: the endpoint being wedged
- *
- * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
- * requests. If the gadget driver clears the halt status, it will
- * automatically unwedge the endpoint.
- *
- * Returns zero on success, else negative errno.
- */
-static inline int
-usb_ep_set_wedge(struct usb_ep *ep)
-{
-	if (ep->ops->set_wedge)
-		return ep->ops->set_wedge(ep);
-	else
-		return ep->ops->set_halt(ep, 1);
-}
-
-/**
- * usb_ep_fifo_status - returns number of bytes in fifo, or error
- * @ep: the endpoint whose fifo status is being checked.
- *
- * FIFO endpoints may have "unclaimed data" in them in certain cases,
- * such as after aborted transfers.  Hosts may not have collected all
- * the IN data written by the gadget driver (and reported by a request
- * completion).  The gadget driver may not have collected all the data
- * written OUT to it by the host.  Drivers that need precise handling for
- * fault reporting or recovery may need to use this call.
- *
- * This returns the number of such bytes in the fifo, or a negative
- * errno if the endpoint doesn't use a FIFO or doesn't support such
- * precise handling.
- */
+{ return 0; }
+static inline int usb_ep_set_wedge(struct usb_ep *ep)
+{ return 0; }
 static inline int usb_ep_fifo_status(struct usb_ep *ep)
-{
-	if (ep->ops->fifo_status)
-		return ep->ops->fifo_status(ep);
-	else
-		return -EOPNOTSUPP;
-}
-
-/**
- * usb_ep_fifo_flush - flushes contents of a fifo
- * @ep: the endpoint whose fifo is being flushed.
- *
- * This call may be used to flush the "unclaimed data" that may exist in
- * an endpoint fifo after abnormal transaction terminations.  The call
- * must never be used except when endpoint is not being used for any
- * protocol translation.
- */
+{ return 0; }
 static inline void usb_ep_fifo_flush(struct usb_ep *ep)
-{
-	if (ep->ops->fifo_flush)
-		ep->ops->fifo_flush(ep);
-}
-
+{ }
+#endif /* USB_GADGET */
 
 /*-------------------------------------------------------------------------*/
 
@@ -582,6 +326,7 @@ struct usb_gadget_ops {
  * @dev: Driver model state for this abstract device.
  * @out_epnum: last used out ep number
  * @in_epnum: last used in ep number
+ * @mA: last set mA value
  * @otg_caps: OTG capabilities of this gadget.
  * @sg_supported: true if we can handle scatter-gather
  * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
@@ -638,6 +383,7 @@ struct usb_gadget {
 	struct device			dev;
 	unsigned			out_epnum;
 	unsigned			in_epnum;
+	unsigned			mA;
 	struct usb_otg_caps		*otg_caps;
 
 	unsigned			sg_supported:1;
@@ -760,251 +506,44 @@ static inline int gadget_is_otg(struct usb_gadget *g)
 #endif
 }
 
-/**
- * usb_gadget_frame_number - returns the current frame number
- * @gadget: controller that reports the frame number
- *
- * Returns the usb frame number, normally eleven bits from a SOF packet,
- * or negative errno if this device doesn't support this capability.
- */
-static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
-{
-	return gadget->ops->get_frame(gadget);
-}
+/*-------------------------------------------------------------------------*/
 
-/**
- * usb_gadget_wakeup - tries to wake up the host connected to this gadget
- * @gadget: controller used to wake up the host
- *
- * Returns zero on success, else negative error code if the hardware
- * doesn't support such attempts, or its support has not been enabled
- * by the usb host.  Drivers must return device descriptors that report
- * their ability to support this, or hosts won't enable it.
- *
- * This may also try to use SRP to wake the host and start enumeration,
- * even if OTG isn't otherwise in use.  OTG devices may also start
- * remote wakeup even when hosts don't explicitly enable it.
- */
+#if IS_ENABLED(CONFIG_USB_GADGET)
+int usb_gadget_frame_number(struct usb_gadget *gadget);
+int usb_gadget_wakeup(struct usb_gadget *gadget);
+int usb_gadget_set_selfpowered(struct usb_gadget *gadget);
+int usb_gadget_clear_selfpowered(struct usb_gadget *gadget);
+int usb_gadget_vbus_connect(struct usb_gadget *gadget);
+int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA);
+int usb_gadget_vbus_disconnect(struct usb_gadget *gadget);
+int usb_gadget_connect(struct usb_gadget *gadget);
+int usb_gadget_disconnect(struct usb_gadget *gadget);
+int usb_gadget_deactivate(struct usb_gadget *gadget);
+int usb_gadget_activate(struct usb_gadget *gadget);
+#else
+static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
+{ return 0; }
 static inline int usb_gadget_wakeup(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->wakeup)
-		return -EOPNOTSUPP;
-	return gadget->ops->wakeup(gadget);
-}
-
-/**
- * usb_gadget_set_selfpowered - sets the device selfpowered feature.
- * @gadget:the device being declared as self-powered
- *
- * this affects the device status reported by the hardware driver
- * to reflect that it now has a local power supply.
- *
- * returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->set_selfpowered)
-		return -EOPNOTSUPP;
-	return gadget->ops->set_selfpowered(gadget, 1);
-}
-
-/**
- * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
- * @gadget:the device being declared as bus-powered
- *
- * this affects the device status reported by the hardware driver.
- * some hardware may not support bus-powered operation, in which
- * case this feature's value can never change.
- *
- * returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->set_selfpowered)
-		return -EOPNOTSUPP;
-	return gadget->ops->set_selfpowered(gadget, 0);
-}
-
-/**
- * usb_gadget_vbus_connect - Notify controller that VBUS is powered
- * @gadget:The device which now has VBUS power.
- * Context: can sleep
- *
- * This call is used by a driver for an external transceiver (or GPIO)
- * that detects a VBUS power session starting.  Common responses include
- * resuming the controller, activating the D+ (or D-) pullup to let the
- * host detect that a USB device is attached, and starting to draw power
- * (8mA or possibly more, especially after SET_CONFIGURATION).
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_connect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->vbus_session)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_session(gadget, 1);
-}
-
-/**
- * usb_gadget_vbus_draw - constrain controller's VBUS power usage
- * @gadget:The device whose VBUS usage is being described
- * @mA:How much current to draw, in milliAmperes.  This should be twice
- *	the value listed in the configuration descriptor bMaxPower field.
- *
- * This call is used by gadget drivers during SET_CONFIGURATION calls,
- * reporting how much power the device may consume.  For example, this
- * could affect how quickly batteries are recharged.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
-{
-	if (!gadget->ops->vbus_draw)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_draw(gadget, mA);
-}
-
-/**
- * usb_gadget_vbus_disconnect - notify controller about VBUS session end
- * @gadget:the device whose VBUS supply is being described
- * Context: can sleep
- *
- * This call is used by a driver for an external transceiver (or GPIO)
- * that detects a VBUS power session ending.  Common responses include
- * reversing everything done in usb_gadget_vbus_connect().
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->vbus_session)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_session(gadget, 0);
-}
-
-/**
- * usb_gadget_connect - software-controlled connect to USB host
- * @gadget:the peripheral being connected
- *
- * Enables the D+ (or potentially D-) pullup.  The host will start
- * enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered).  This pullup is always enabled unless
- * usb_gadget_disconnect() has been used to disable it.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_connect(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (!gadget->ops->pullup)
-		return -EOPNOTSUPP;
-
-	if (gadget->deactivated) {
-		/*
-		 * If gadget is deactivated we only save new state.
-		 * Gadget will be connected automatically after activation.
-		 */
-		gadget->connected = true;
-		return 0;
-	}
-
-	ret = gadget->ops->pullup(gadget, 1);
-	if (!ret)
-		gadget->connected = 1;
-	return ret;
-}
-
-/**
- * usb_gadget_disconnect - software-controlled disconnect from USB host
- * @gadget:the peripheral being disconnected
- *
- * Disables the D+ (or potentially D-) pullup, which the host may see
- * as a disconnect (when a VBUS session is active).  Not all systems
- * support software pullup controls.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (!gadget->ops->pullup)
-		return -EOPNOTSUPP;
-
-	if (gadget->deactivated) {
-		/*
-		 * If gadget is deactivated we only save new state.
-		 * Gadget will stay disconnected after activation.
-		 */
-		gadget->connected = false;
-		return 0;
-	}
-
-	ret = gadget->ops->pullup(gadget, 0);
-	if (!ret)
-		gadget->connected = 0;
-	return ret;
-}
-
-/**
- * usb_gadget_deactivate - deactivate function which is not ready to work
- * @gadget: the peripheral being deactivated
- *
- * This routine may be used during the gadget driver bind() call to prevent
- * the peripheral from ever being visible to the USB host, unless later
- * usb_gadget_activate() is called.  For example, user mode components may
- * need to be activated before the system can talk to hosts.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_deactivate(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (gadget->deactivated)
-		return 0;
-
-	if (gadget->connected) {
-		ret = usb_gadget_disconnect(gadget);
-		if (ret)
-			return ret;
-		/*
-		 * If gadget was being connected before deactivation, we want
-		 * to reconnect it in usb_gadget_activate().
-		 */
-		gadget->connected = true;
-	}
-	gadget->deactivated = true;
-
-	return 0;
-}
-
-/**
- * usb_gadget_activate - activate function which is not ready to work
- * @gadget: the peripheral being activated
- *
- * This routine activates gadget which was previously deactivated with
- * usb_gadget_deactivate() call. It calls usb_gadget_connect() if needed.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_activate(struct usb_gadget *gadget)
-{
-	if (!gadget->deactivated)
-		return 0;
-
-	gadget->deactivated = false;
-
-	/*
-	 * If gadget has been connected before deactivation, or became connected
-	 * while it was being deactivated, we call usb_gadget_connect().
-	 */
-	if (gadget->connected)
-		return usb_gadget_connect(gadget);
-
-	return 0;
-}
+{ return 0; }
+#endif /* CONFIG_USB_GADGET */
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
deleted file mode 100644
index 8c8f6854c993..000000000000
--- a/include/linux/usb/msm_hsusb.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* linux/include/asm-arm/arch-msm/hsusb.h
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HSUSB_H
-#define __ASM_ARCH_MSM_HSUSB_H
-
-#include <linux/extcon.h>
-#include <linux/types.h>
-#include <linux/usb/otg.h>
-#include <linux/clk.h>
-
-/**
- * OTG control
- *
- * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
- *                      only configuration.
- * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
- * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
- * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
- *
- */
-enum otg_control_type {
-	OTG_NO_CONTROL = 0,
-	OTG_PHY_CONTROL,
-	OTG_PMIC_CONTROL,
-	OTG_USER_CONTROL,
-};
-
-/**
- * PHY used in
- *
- * INVALID_PHY			Unsupported PHY
- * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
- * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
- *
- */
-enum msm_usb_phy_type {
-	INVALID_PHY = 0,
-	CI_45NM_INTEGRATED_PHY,
-	SNPS_28NM_INTEGRATED_PHY,
-};
-
-#define IDEV_CHG_MAX	1500
-#define IUNIT		100
-
-/**
- * Different states involved in USB charger detection.
- *
- * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
- *                              process is not yet started.
- * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
- * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
- * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
- *                              between SDP and DCP/CDP).
- * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
- *                              between DCP and CDP).
- * USB_CHG_STATE_DETECTED	USB charger type is determined.
- *
- */
-enum usb_chg_state {
-	USB_CHG_STATE_UNDEFINED = 0,
-	USB_CHG_STATE_WAIT_FOR_DCD,
-	USB_CHG_STATE_DCD_DONE,
-	USB_CHG_STATE_PRIMARY_DONE,
-	USB_CHG_STATE_SECONDARY_DONE,
-	USB_CHG_STATE_DETECTED,
-};
-
-/**
- * USB charger types
- *
- * USB_INVALID_CHARGER	Invalid USB charger.
- * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
- *                      on USB2.0 compliant host/hub.
- * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
- * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
- *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
- *
- */
-enum usb_chg_type {
-	USB_INVALID_CHARGER = 0,
-	USB_SDP_CHARGER,
-	USB_DCP_CHARGER,
-	USB_CDP_CHARGER,
-};
-
-/**
- * struct msm_otg_platform_data - platform device data
- *              for msm_otg driver.
- * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
- *              "do not overwrite default vaule at this address".
- * @phy_init_sz: PHY configuration sequence size.
- * @vbus_power: VBUS power on/off routine.
- * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
- * @mode: Supported mode (OTG/peripheral/host).
- * @otg_control: OTG switch controlled by user/Id pin
- */
-struct msm_otg_platform_data {
-	int *phy_init_seq;
-	int phy_init_sz;
-	void (*vbus_power)(bool on);
-	unsigned power_budget;
-	enum usb_dr_mode mode;
-	enum otg_control_type otg_control;
-	enum msm_usb_phy_type phy_type;
-	void (*setup_gpio)(enum usb_otg_state state);
-};
-
-/**
- * struct msm_usb_cable - structure for exteternal connector cable
- *			  state tracking
- * @nb: hold event notification callback
- * @conn: used for notification registration
- */
-struct msm_usb_cable {
-	struct notifier_block		nb;
-	struct extcon_dev		*extcon;
-};
-
-/**
- * struct msm_otg: OTG driver data. Shared by HCD and DCD.
- * @otg: USB OTG Transceiver structure.
- * @pdata: otg device platform data.
- * @irq: IRQ number assigned for HSUSB controller.
- * @clk: clock struct of usb_hs_clk.
- * @pclk: clock struct of usb_hs_pclk.
- * @core_clk: clock struct of usb_hs_core_clk.
- * @regs: ioremapped register base address.
- * @inputs: OTG state machine inputs(Id, SessValid etc).
- * @sm_work: OTG state machine work.
- * @in_lpm: indicates low power mode (LPM) state.
- * @async_int: Async interrupt arrived.
- * @cur_power: The amount of mA available from downstream port.
- * @chg_work: Charger detection work.
- * @chg_state: The state of charger detection process.
- * @chg_type: The type of charger attached.
- * @dcd_retires: The retry count used to track Data contact
- *               detection process.
- * @manual_pullup: true if VBUS is not routed to USB controller/phy
- *	and controller driver therefore enables pull-up explicitly before
- *	starting controller using usbcmd run/stop bit.
- * @vbus: VBUS signal state trakining, using extcon framework
- * @id: ID signal state trakining, using extcon framework
- * @switch_gpio: Descriptor for GPIO used to control external Dual
- *               SPDT USB Switch.
- * @reboot: Used to inform the driver to route USB D+/D- line to Device
- *	    connector
- */
-struct msm_otg {
-	struct usb_phy phy;
-	struct msm_otg_platform_data *pdata;
-	int irq;
-	struct clk *clk;
-	struct clk *pclk;
-	struct clk *core_clk;
-	void __iomem *regs;
-#define ID		0
-#define B_SESS_VLD	1
-	unsigned long inputs;
-	struct work_struct sm_work;
-	atomic_t in_lpm;
-	int async_int;
-	unsigned cur_power;
-	int phy_number;
-	struct delayed_work chg_work;
-	enum usb_chg_state chg_state;
-	enum usb_chg_type chg_type;
-	u8 dcd_retries;
-	struct regulator *v3p3;
-	struct regulator *v1p8;
-	struct regulator *vddcx;
-
-	struct reset_control *phy_rst;
-	struct reset_control *link_rst;
-	int vdd_levels[3];
-
-	bool manual_pullup;
-
-	struct msm_usb_cable vbus;
-	struct msm_usb_cable id;
-
-	struct gpio_desc *switch_gpio;
-	struct notifier_block reboot;
-};
-
-#endif
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
index de3237fce6b2..5ff9032ee1b4 100644
--- a/include/linux/usb/of.h
+++ b/include/linux/usb/of.h
@@ -12,7 +12,7 @@
 #include <linux/usb/phy.h>
 
 #if IS_ENABLED(CONFIG_OF)
-enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np);
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0);
 bool of_usb_host_tpl_support(struct device_node *np);
 int of_usb_update_otg_caps(struct device_node *np,
 			struct usb_otg_caps *otg_caps);
@@ -20,7 +20,7 @@ struct device_node *usb_of_get_child_node(struct device_node *parent,
 			int portnum);
 #else
 static inline enum usb_dr_mode
-of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
 {
 	return USB_DR_MODE_UNKNOWN;
 }
diff --git a/include/linux/usb/xhci_pdriver.h b/include/linux/usb/xhci_pdriver.h
deleted file mode 100644
index 376654b5b0f7..000000000000
--- a/include/linux/usb/xhci_pdriver.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- */
-
-#ifndef __USB_CORE_XHCI_PDRIVER_H
-#define __USB_CORE_XHCI_PDRIVER_H
-
-/**
- * struct usb_xhci_pdata - platform_data for generic xhci platform driver
- *
- * @usb3_lpm_capable:	determines if this xhci platform supports USB3
- *			LPM capability
- *
- */
-struct usb_xhci_pdata {
-	unsigned	usb3_lpm_capable:1;
-};
-
-#endif /* __USB_CORE_XHCI_PDRIVER_H */