diff options
author | Doug Anderson | 2014-12-02 15:42:47 -0800 |
---|---|---|
committer | Ulf Hansson | 2015-01-19 09:56:05 +0100 |
commit | f8c58c1136349fdfa9b605c501f2f911622d3a9a (patch) | |
tree | 3f214e01a5ff8a1715dc8835a44406116146ef60 /include | |
parent | b24c8b260189fe21cca992d2f5175a33f6cc5477 (diff) |
mmc: dw_mmc: Protect read-modify-write of INTMASK with a lock
We're running into cases where our enabling of the SDIO interrupt in
dw_mmc doesn't actually take effect. Specifically, adding patch like
this:
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1076,6 +1076,9 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
mci_writel(host, INTMASK,
(int_mask | SDMMC_INT_SDIO(slot->id)));
+ int_mask = mci_readl(host, INTMASK);
+ if (!(int_mask & SDMMC_INT_SDIO(slot->id)))
+ dev_err(&mmc->class_dev, "failed to enable sdio irq\n");
} else {
...actually triggers the error message. That's because the
dw_mci_enable_sdio_irq() unsafely does a read-modify-write of the
INTMASK register.
We can't just use the standard host->lock since that lock is not irq
safe and mmc_signal_sdio_irq() (called from interrupt context) calls
dw_mci_enable_sdio_irq(). Add a new irq-safe lock to protect INTMASK.
An alternate solution to this is to punt mmc_signal_sdio_irq() to the
tasklet and then protect INTMASK modifications by the standard host
lock. This seemed like a bit more of a high-latency change.
Reported-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/mmc/dw_mmc.h | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 42b724e8d503..471fb3116dbe 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -106,6 +106,11 @@ struct mmc_data; * @cur_slot, @mrq and @state. These must always be updated * at the same time while holding @lock. * + * @irq_lock is an irq-safe spinlock protecting the INTMASK register + * to allow the interrupt handler to modify it directly. Held for only long + * enough to read-modify-write INTMASK and no other locks are grabbed when + * holding this one. + * * The @mrq field of struct dw_mci_slot is also protected by @lock, * and must always be written at the same time as the slot is added to * @queue. @@ -125,6 +130,7 @@ struct mmc_data; */ struct dw_mci { spinlock_t lock; + spinlock_t irq_lock; void __iomem *regs; struct scatterlist *sg; |