aboutsummaryrefslogtreecommitdiff
path: root/init
diff options
context:
space:
mode:
authorChristoph Hellwig2020-06-07 16:18:59 +0200
committerChristoph Hellwig2020-07-16 15:34:47 +0200
commit4f5b246b37e024955c0fcca0c7f5952089052d1d (patch)
treea005ef9ca23012d565665c176e92f0e6f3047413 /init
parent881627f353754dd05a8f3e1c1941f0dbbf47a170 (diff)
md: move the early init autodetect code to drivers/md/
Just like the NFS and CIFS root code this better lives with the driver it is tightly integrated with. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'init')
-rw-r--r--init/Makefile1
-rw-r--r--init/do_mounts.c1
-rw-r--r--init/do_mounts.h10
-rw-r--r--init/do_mounts_md.c304
4 files changed, 1 insertions, 315 deletions
diff --git a/init/Makefile b/init/Makefile
index 57499b1ff471..6bc37f64b361 100644
--- a/init/Makefile
+++ b/init/Makefile
@@ -18,7 +18,6 @@ obj-y += init_task.o
mounts-y := do_mounts.o
mounts-$(CONFIG_BLK_DEV_RAM) += do_mounts_rd.o
mounts-$(CONFIG_BLK_DEV_INITRD) += do_mounts_initrd.o
-mounts-$(CONFIG_BLK_DEV_MD) += do_mounts_md.o
# dependencies on generated files need to be listed explicitly
$(obj)/version.o: include/generated/compile.h
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 29d326b6c29d..1a4dfa17fb28 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -23,6 +23,7 @@
#include <linux/nfs_fs.h>
#include <linux/nfs_fs_sb.h>
#include <linux/nfs_mount.h>
+#include <linux/raid/detect.h>
#include <uapi/linux/mount.h>
#include "do_mounts.h"
diff --git a/init/do_mounts.h b/init/do_mounts.h
index 7513d1c14d13..50d6c8941e15 100644
--- a/init/do_mounts.h
+++ b/init/do_mounts.h
@@ -41,13 +41,3 @@ bool __init initrd_load(void);
static inline bool initrd_load(void) { return false; }
#endif
-
-#ifdef CONFIG_BLK_DEV_MD
-
-void md_run_setup(void);
-
-#else
-
-static inline void md_run_setup(void) {}
-
-#endif
diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c
deleted file mode 100644
index 359363e85ccd..000000000000
--- a/init/do_mounts_md.c
+++ /dev/null
@@ -1,304 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/delay.h>
-#include <linux/raid/md_u.h>
-#include <linux/raid/md_p.h>
-
-#include "do_mounts.h"
-
-/*
- * When md (and any require personalities) are compiled into the kernel
- * (not a module), arrays can be assembles are boot time using with AUTODETECT
- * where specially marked partitions are registered with md_autodetect_dev(),
- * and with MD_BOOT where devices to be collected are given on the boot line
- * with md=.....
- * The code for that is here.
- */
-
-#ifdef CONFIG_MD_AUTODETECT
-static int __initdata raid_noautodetect;
-#else
-static int __initdata raid_noautodetect=1;
-#endif
-static int __initdata raid_autopart;
-
-static struct {
- int minor;
- int partitioned;
- int level;
- int chunk;
- char *device_names;
-} md_setup_args[256] __initdata;
-
-static int md_setup_ents __initdata;
-
-/*
- * Parse the command-line parameters given our kernel, but do not
- * actually try to invoke the MD device now; that is handled by
- * md_setup_drive after the low-level disk drivers have initialised.
- *
- * 27/11/1999: Fixed to work correctly with the 2.3 kernel (which
- * assigns the task of parsing integer arguments to the
- * invoked program now). Added ability to initialise all
- * the MD devices (by specifying multiple "md=" lines)
- * instead of just one. -- KTK
- * 18May2000: Added support for persistent-superblock arrays:
- * md=n,0,factor,fault,device-list uses RAID0 for device n
- * md=n,-1,factor,fault,device-list uses LINEAR for device n
- * md=n,device-list reads a RAID superblock from the devices
- * elements in device-list are read by name_to_kdev_t so can be
- * a hex number or something like /dev/hda1 /dev/sdb
- * 2001-06-03: Dave Cinege <dcinege@psychosis.com>
- * Shifted name_to_kdev_t() and related operations to md_set_drive()
- * for later execution. Rewrote section to make devfs compatible.
- */
-static int __init md_setup(char *str)
-{
- int minor, level, factor, fault, partitioned = 0;
- char *pername = "";
- char *str1;
- int ent;
-
- if (*str == 'd') {
- partitioned = 1;
- str++;
- }
- if (get_option(&str, &minor) != 2) { /* MD Number */
- printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
- return 0;
- }
- str1 = str;
- for (ent=0 ; ent< md_setup_ents ; ent++)
- if (md_setup_args[ent].minor == minor &&
- md_setup_args[ent].partitioned == partitioned) {
- printk(KERN_WARNING "md: md=%s%d, Specified more than once. "
- "Replacing previous definition.\n", partitioned?"d":"", minor);
- break;
- }
- if (ent >= ARRAY_SIZE(md_setup_args)) {
- printk(KERN_WARNING "md: md=%s%d - too many md initialisations\n", partitioned?"d":"", minor);
- return 0;
- }
- if (ent >= md_setup_ents)
- md_setup_ents++;
- switch (get_option(&str, &level)) { /* RAID level */
- case 2: /* could be 0 or -1.. */
- if (level == 0 || level == LEVEL_LINEAR) {
- if (get_option(&str, &factor) != 2 || /* Chunk Size */
- get_option(&str, &fault) != 2) {
- printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
- return 0;
- }
- md_setup_args[ent].level = level;
- md_setup_args[ent].chunk = 1 << (factor+12);
- if (level == LEVEL_LINEAR)
- pername = "linear";
- else
- pername = "raid0";
- break;
- }
- /* FALL THROUGH */
- case 1: /* the first device is numeric */
- str = str1;
- /* FALL THROUGH */
- case 0:
- md_setup_args[ent].level = LEVEL_NONE;
- pername="super-block";
- }
-
- printk(KERN_INFO "md: Will configure md%d (%s) from %s, below.\n",
- minor, pername, str);
- md_setup_args[ent].device_names = str;
- md_setup_args[ent].partitioned = partitioned;
- md_setup_args[ent].minor = minor;
-
- return 1;
-}
-
-static void __init md_setup_drive(void)
-{
- int minor, i, ent, partitioned;
- dev_t dev;
- dev_t devices[MD_SB_DISKS+1];
-
- for (ent = 0; ent < md_setup_ents ; ent++) {
- int fd;
- int err = 0;
- char *devname;
- mdu_disk_info_t dinfo;
- char name[16];
-
- minor = md_setup_args[ent].minor;
- partitioned = md_setup_args[ent].partitioned;
- devname = md_setup_args[ent].device_names;
-
- sprintf(name, "/dev/md%s%d", partitioned?"_d":"", minor);
- if (partitioned)
- dev = MKDEV(mdp_major, minor << MdpMinorShift);
- else
- dev = MKDEV(MD_MAJOR, minor);
- create_dev(name, dev);
- for (i = 0; i < MD_SB_DISKS && devname != NULL; i++) {
- struct kstat stat;
- char *p;
- char comp_name[64];
-
- p = strchr(devname, ',');
- if (p)
- *p++ = 0;
-
- dev = name_to_dev_t(devname);
- if (strncmp(devname, "/dev/", 5) == 0)
- devname += 5;
- snprintf(comp_name, 63, "/dev/%s", devname);
- if (vfs_stat(comp_name, &stat) == 0 &&
- S_ISBLK(stat.mode))
- dev = new_decode_dev(stat.rdev);
- if (!dev) {
- printk(KERN_WARNING "md: Unknown device name: %s\n", devname);
- break;
- }
-
- devices[i] = dev;
-
- devname = p;
- }
- devices[i] = 0;
-
- if (!i)
- continue;
-
- printk(KERN_INFO "md: Loading md%s%d: %s\n",
- partitioned ? "_d" : "", minor,
- md_setup_args[ent].device_names);
-
- fd = ksys_open(name, 0, 0);
- if (fd < 0) {
- printk(KERN_ERR "md: open failed - cannot start "
- "array %s\n", name);
- continue;
- }
- if (ksys_ioctl(fd, SET_ARRAY_INFO, 0) == -EBUSY) {
- printk(KERN_WARNING
- "md: Ignoring md=%d, already autodetected. (Use raid=noautodetect)\n",
- minor);
- ksys_close(fd);
- continue;
- }
-
- if (md_setup_args[ent].level != LEVEL_NONE) {
- /* non-persistent */
- mdu_array_info_t ainfo;
- ainfo.level = md_setup_args[ent].level;
- ainfo.size = 0;
- ainfo.nr_disks =0;
- ainfo.raid_disks =0;
- while (devices[ainfo.raid_disks])
- ainfo.raid_disks++;
- ainfo.md_minor =minor;
- ainfo.not_persistent = 1;
-
- ainfo.state = (1 << MD_SB_CLEAN);
- ainfo.layout = 0;
- ainfo.chunk_size = md_setup_args[ent].chunk;
- err = ksys_ioctl(fd, SET_ARRAY_INFO, (long)&ainfo);
- for (i = 0; !err && i <= MD_SB_DISKS; i++) {
- dev = devices[i];
- if (!dev)
- break;
- dinfo.number = i;
- dinfo.raid_disk = i;
- dinfo.state = (1<<MD_DISK_ACTIVE)|(1<<MD_DISK_SYNC);
- dinfo.major = MAJOR(dev);
- dinfo.minor = MINOR(dev);
- err = ksys_ioctl(fd, ADD_NEW_DISK,
- (long)&dinfo);
- }
- } else {
- /* persistent */
- for (i = 0; i <= MD_SB_DISKS; i++) {
- dev = devices[i];
- if (!dev)
- break;
- dinfo.major = MAJOR(dev);
- dinfo.minor = MINOR(dev);
- ksys_ioctl(fd, ADD_NEW_DISK, (long)&dinfo);
- }
- }
- if (!err)
- err = ksys_ioctl(fd, RUN_ARRAY, 0);
- if (err)
- printk(KERN_WARNING "md: starting md%d failed\n", minor);
- else {
- /* reread the partition table.
- * I (neilb) and not sure why this is needed, but I cannot
- * boot a kernel with devfs compiled in from partitioned md
- * array without it
- */
- ksys_close(fd);
- fd = ksys_open(name, 0, 0);
- ksys_ioctl(fd, BLKRRPART, 0);
- }
- ksys_close(fd);
- }
-}
-
-static int __init raid_setup(char *str)
-{
- int len, pos;
-
- len = strlen(str) + 1;
- pos = 0;
-
- while (pos < len) {
- char *comma = strchr(str+pos, ',');
- int wlen;
- if (comma)
- wlen = (comma-str)-pos;
- else wlen = (len-1)-pos;
-
- if (!strncmp(str, "noautodetect", wlen))
- raid_noautodetect = 1;
- if (!strncmp(str, "autodetect", wlen))
- raid_noautodetect = 0;
- if (strncmp(str, "partitionable", wlen)==0)
- raid_autopart = 1;
- if (strncmp(str, "part", wlen)==0)
- raid_autopart = 1;
- pos += wlen+1;
- }
- return 1;
-}
-
-__setup("raid=", raid_setup);
-__setup("md=", md_setup);
-
-static void __init autodetect_raid(void)
-{
- int fd;
-
- /*
- * Since we don't want to detect and use half a raid array, we need to
- * wait for the known devices to complete their probing
- */
- printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
- printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
-
- wait_for_device_probe();
-
- fd = ksys_open("/dev/md0", 0, 0);
- if (fd >= 0) {
- ksys_ioctl(fd, RAID_AUTORUN, raid_autopart);
- ksys_close(fd);
- }
-}
-
-void __init md_run_setup(void)
-{
- create_dev("/dev/md0", MKDEV(MD_MAJOR, 0));
-
- if (raid_noautodetect)
- printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=autodetect will force)\n");
- else
- autodetect_raid();
- md_setup_drive();
-}