Merge branch 'rcu/idle' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull the RCU adaptive-idle feature from Paul E. McKenney:

 "This series adds RCU APIs that allow non-idle tasks to
  enter RCU idle mode and provides x86 code to make use of them, allowing
  RCU to treat user-mode execution as an extended quiescent state when the
  new RCU_USER_QS kernel configuration parameter is specified.  Work is
  in progress to port this to a few other architectures, but is not part
  of this series."

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 183 insertions, 27 deletions

diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 7387e46009d9..4fb2376ddf06 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -206,6 +206,9 @@ EXPORT_SYMBOL_GPL(rcu_note_context_switch);
 DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
 	.dynticks_nesting = DYNTICK_TASK_EXIT_IDLE,
 	.dynticks = ATOMIC_INIT(1),
+#if defined(CONFIG_RCU_USER_QS) && !defined(CONFIG_RCU_USER_QS_FORCE)
+	.ignore_user_qs = true,
+#endif
 };
 
 static int blimit = 10;		/* Maximum callbacks per rcu_do_batch. */
@@ -322,16 +325,17 @@ static struct rcu_node *rcu_get_root(struct rcu_state *rsp)
 }
 
 /*
- * rcu_idle_enter_common - inform RCU that current CPU is moving towards idle
+ * rcu_eqs_enter_common - current CPU is moving towards extended quiescent state
  *
  * If the new value of the ->dynticks_nesting counter now is zero,
  * we really have entered idle, and must do the appropriate accounting.
  * The caller must have disabled interrupts.
  */
-static void rcu_idle_enter_common(struct rcu_dynticks *rdtp, long long oldval)
+static void rcu_eqs_enter_common(struct rcu_dynticks *rdtp, long long oldval,
+				bool user)
 {
 	trace_rcu_dyntick("Start", oldval, 0);
-	if (!is_idle_task(current)) {
+	if (!user && !is_idle_task(current)) {
 		struct task_struct *idle = idle_task(smp_processor_id());
 
 		trace_rcu_dyntick("Error on entry: not idle task", oldval, 0);
@@ -348,7 +352,7 @@ static void rcu_idle_enter_common(struct rcu_dynticks *rdtp, long long oldval)
 	WARN_ON_ONCE(atomic_read(&rdtp->dynticks) & 0x1);
 
 	/*
-	 * The idle task is not permitted to enter the idle loop while
+	 * It is illegal to enter an extended quiescent state while
 	 * in an RCU read-side critical section.
 	 */
 	rcu_lockdep_assert(!lock_is_held(&rcu_lock_map),
@@ -359,6 +363,25 @@ static void rcu_idle_enter_common(struct rcu_dynticks *rdtp, long long oldval)
 			   "Illegal idle entry in RCU-sched read-side critical section.");
 }
 
+/*
+ * Enter an RCU extended quiescent state, which can be either the
+ * idle loop or adaptive-tickless usermode execution.
+ */
+static void rcu_eqs_enter(bool user)
+{
+	long long oldval;
+	struct rcu_dynticks *rdtp;
+
+	rdtp = &__get_cpu_var(rcu_dynticks);
+	oldval = rdtp->dynticks_nesting;
+	WARN_ON_ONCE((oldval & DYNTICK_TASK_NEST_MASK) == 0);
+	if ((oldval & DYNTICK_TASK_NEST_MASK) == DYNTICK_TASK_NEST_VALUE)
+		rdtp->dynticks_nesting = 0;
+	else
+		rdtp->dynticks_nesting -= DYNTICK_TASK_NEST_VALUE;
+	rcu_eqs_enter_common(rdtp, oldval, user);
+}
+
 /**
  * rcu_idle_enter - inform RCU that current CPU is entering idle
  *
@@ -374,21 +397,70 @@ static void rcu_idle_enter_common(struct rcu_dynticks *rdtp, long long oldval)
 void rcu_idle_enter(void)
 {
 	unsigned long flags;
-	long long oldval;
+
+	local_irq_save(flags);
+	rcu_eqs_enter(false);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(rcu_idle_enter);
+
+#ifdef CONFIG_RCU_USER_QS
+/**
+ * rcu_user_enter - inform RCU that we are resuming userspace.
+ *
+ * Enter RCU idle mode right before resuming userspace.  No use of RCU
+ * is permitted between this call and rcu_user_exit(). This way the
+ * CPU doesn't need to maintain the tick for RCU maintenance purposes
+ * when the CPU runs in userspace.
+ */
+void rcu_user_enter(void)
+{
+	unsigned long flags;
 	struct rcu_dynticks *rdtp;
 
+	/*
+	 * Some contexts may involve an exception occuring in an irq,
+	 * leading to that nesting:
+	 * rcu_irq_enter() rcu_user_exit() rcu_user_exit() rcu_irq_exit()
+	 * This would mess up the dyntick_nesting count though. And rcu_irq_*()
+	 * helpers are enough to protect RCU uses inside the exception. So
+	 * just return immediately if we detect we are in an IRQ.
+	 */
+	if (in_interrupt())
+		return;
+
+	WARN_ON_ONCE(!current->mm);
+
 	local_irq_save(flags);
 	rdtp = &__get_cpu_var(rcu_dynticks);
-	oldval = rdtp->dynticks_nesting;
-	WARN_ON_ONCE((oldval & DYNTICK_TASK_NEST_MASK) == 0);
-	if ((oldval & DYNTICK_TASK_NEST_MASK) == DYNTICK_TASK_NEST_VALUE)
-		rdtp->dynticks_nesting = 0;
-	else
-		rdtp->dynticks_nesting -= DYNTICK_TASK_NEST_VALUE;
-	rcu_idle_enter_common(rdtp, oldval);
+	if (!rdtp->ignore_user_qs && !rdtp->in_user) {
+		rdtp->in_user = true;
+		rcu_eqs_enter(true);
+	}
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL_GPL(rcu_idle_enter);
+
+/**
+ * rcu_user_enter_after_irq - inform RCU that we are going to resume userspace
+ * after the current irq returns.
+ *
+ * This is similar to rcu_user_enter() but in the context of a non-nesting
+ * irq. After this call, RCU enters into idle mode when the interrupt
+ * returns.
+ */
+void rcu_user_enter_after_irq(void)
+{
+	unsigned long flags;
+	struct rcu_dynticks *rdtp;
+
+	local_irq_save(flags);
+	rdtp = &__get_cpu_var(rcu_dynticks);
+	/* Ensure this irq is interrupting a non-idle RCU state.  */
+	WARN_ON_ONCE(!(rdtp->dynticks_nesting & DYNTICK_TASK_MASK));
+	rdtp->dynticks_nesting = 1;
+	local_irq_restore(flags);
+}
+#endif /* CONFIG_RCU_USER_QS */
 
 /**
  * rcu_irq_exit - inform RCU that current CPU is exiting irq towards idle
@@ -420,18 +492,19 @@ void rcu_irq_exit(void)
 	if (rdtp->dynticks_nesting)
 		trace_rcu_dyntick("--=", oldval, rdtp->dynticks_nesting);
 	else
-		rcu_idle_enter_common(rdtp, oldval);
+		rcu_eqs_enter_common(rdtp, oldval, true);
 	local_irq_restore(flags);
 }
 
 /*
- * rcu_idle_exit_common - inform RCU that current CPU is moving away from idle
+ * rcu_eqs_exit_common - current CPU moving away from extended quiescent state
  *
  * If the new value of the ->dynticks_nesting counter was previously zero,
  * we really have exited idle, and must do the appropriate accounting.
  * The caller must have disabled interrupts.
  */
-static void rcu_idle_exit_common(struct rcu_dynticks *rdtp, long long oldval)
+static void rcu_eqs_exit_common(struct rcu_dynticks *rdtp, long long oldval,
+			       int user)
 {
 	smp_mb__before_atomic_inc();  /* Force ordering w/previous sojourn. */
 	atomic_inc(&rdtp->dynticks);
@@ -440,7 +513,7 @@ static void rcu_idle_exit_common(struct rcu_dynticks *rdtp, long long oldval)
 	WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1));
 	rcu_cleanup_after_idle(smp_processor_id());
 	trace_rcu_dyntick("End", oldval, rdtp->dynticks_nesting);
-	if (!is_idle_task(current)) {
+	if (!user && !is_idle_task(current)) {
 		struct task_struct *idle = idle_task(smp_processor_id());
 
 		trace_rcu_dyntick("Error on exit: not idle task",
@@ -452,6 +525,25 @@ static void rcu_idle_exit_common(struct rcu_dynticks *rdtp, long long oldval)
 	}
 }
 
+/*
+ * Exit an RCU extended quiescent state, which can be either the
+ * idle loop or adaptive-tickless usermode execution.
+ */
+static void rcu_eqs_exit(bool user)
+{
+	struct rcu_dynticks *rdtp;
+	long long oldval;
+
+	rdtp = &__get_cpu_var(rcu_dynticks);
+	oldval = rdtp->dynticks_nesting;
+	WARN_ON_ONCE(oldval < 0);
+	if (oldval & DYNTICK_TASK_NEST_MASK)
+		rdtp->dynticks_nesting += DYNTICK_TASK_NEST_VALUE;
+	else
+		rdtp->dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
+	rcu_eqs_exit_common(rdtp, oldval, user);
+}
+
 /**
  * rcu_idle_exit - inform RCU that current CPU is leaving idle
  *
@@ -466,21 +558,67 @@ static void rcu_idle_exit_common(struct rcu_dynticks *rdtp, long long oldval)
 void rcu_idle_exit(void)
 {
 	unsigned long flags;
+
+	local_irq_save(flags);
+	rcu_eqs_exit(false);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(rcu_idle_exit);
+
+#ifdef CONFIG_RCU_USER_QS
+/**
+ * rcu_user_exit - inform RCU that we are exiting userspace.
+ *
+ * Exit RCU idle mode while entering the kernel because it can
+ * run a RCU read side critical section anytime.
+ */
+void rcu_user_exit(void)
+{
+	unsigned long flags;
 	struct rcu_dynticks *rdtp;
-	long long oldval;
+
+	/*
+	 * Some contexts may involve an exception occuring in an irq,
+	 * leading to that nesting:
+	 * rcu_irq_enter() rcu_user_exit() rcu_user_exit() rcu_irq_exit()
+	 * This would mess up the dyntick_nesting count though. And rcu_irq_*()
+	 * helpers are enough to protect RCU uses inside the exception. So
+	 * just return immediately if we detect we are in an IRQ.
+	 */
+	if (in_interrupt())
+		return;
 
 	local_irq_save(flags);
 	rdtp = &__get_cpu_var(rcu_dynticks);
-	oldval = rdtp->dynticks_nesting;
-	WARN_ON_ONCE(oldval < 0);
-	if (oldval & DYNTICK_TASK_NEST_MASK)
-		rdtp->dynticks_nesting += DYNTICK_TASK_NEST_VALUE;
-	else
-		rdtp->dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
-	rcu_idle_exit_common(rdtp, oldval);
+	if (rdtp->in_user) {
+		rdtp->in_user = false;
+		rcu_eqs_exit(true);
+	}
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL_GPL(rcu_idle_exit);
+
+/**
+ * rcu_user_exit_after_irq - inform RCU that we won't resume to userspace
+ * idle mode after the current non-nesting irq returns.
+ *
+ * This is similar to rcu_user_exit() but in the context of an irq.
+ * This is called when the irq has interrupted a userspace RCU idle mode
+ * context. When the current non-nesting interrupt returns after this call,
+ * the CPU won't restore the RCU idle mode.
+ */
+void rcu_user_exit_after_irq(void)
+{
+	unsigned long flags;
+	struct rcu_dynticks *rdtp;
+
+	local_irq_save(flags);
+	rdtp = &__get_cpu_var(rcu_dynticks);
+	/* Ensure we are interrupting an RCU idle mode. */
+	WARN_ON_ONCE(rdtp->dynticks_nesting & DYNTICK_TASK_NEST_MASK);
+	rdtp->dynticks_nesting += DYNTICK_TASK_EXIT_IDLE;
+	local_irq_restore(flags);
+}
+#endif /* CONFIG_RCU_USER_QS */
 
 /**
  * rcu_irq_enter - inform RCU that current CPU is entering irq away from idle
@@ -515,7 +653,7 @@ void rcu_irq_enter(void)
 	if (oldval)
 		trace_rcu_dyntick("++=", oldval, rdtp->dynticks_nesting);
 	else
-		rcu_idle_exit_common(rdtp, oldval);
+		rcu_eqs_exit_common(rdtp, oldval, true);
 	local_irq_restore(flags);
 }
 
@@ -579,6 +717,21 @@ int rcu_is_cpu_idle(void)
 }
 EXPORT_SYMBOL(rcu_is_cpu_idle);
 
+#ifdef CONFIG_RCU_USER_QS
+void rcu_user_hooks_switch(struct task_struct *prev,
+			   struct task_struct *next)
+{
+	struct rcu_dynticks *rdtp;
+
+	/* Interrupts are disabled in context switch */
+	rdtp = &__get_cpu_var(rcu_dynticks);
+	if (!rdtp->ignore_user_qs) {
+		clear_tsk_thread_flag(prev, TIF_NOHZ);
+		set_tsk_thread_flag(next, TIF_NOHZ);
+	}
+}
+#endif /* #ifdef CONFIG_RCU_USER_QS */
+
 #if defined(CONFIG_PROVE_RCU) && defined(CONFIG_HOTPLUG_CPU)
 
 /*
@@ -2473,6 +2626,9 @@ rcu_boot_init_percpu_data(int cpu, struct rcu_state *rsp)
 	rdp->dynticks = &per_cpu(rcu_dynticks, cpu);
 	WARN_ON_ONCE(rdp->dynticks->dynticks_nesting != DYNTICK_TASK_EXIT_IDLE);
 	WARN_ON_ONCE(atomic_read(&rdp->dynticks->dynticks) != 1);
+#ifdef CONFIG_RCU_USER_QS
+	WARN_ON_ONCE(rdp->dynticks->in_user);
+#endif
 	rdp->cpu = cpu;
 	rdp->rsp = rsp;
 	raw_spin_unlock_irqrestore(&rnp->lock, flags);