diff options
| author | Jim Cromie | 2006-06-27 02:54:26 -0700 |
|---|---|---|
| committer | Linus Torvalds | 2006-06-27 17:32:43 -0700 |
| commit | 23916a8e3d8f41aa91474e834ac99808b197c39e (patch) | |
| tree | d5d08172500e1b7bca0317bf29f6dd917b034200 /mm/slab.c | |
| parent | ec312310e43acd5bb8b49314c6d472bb60d2d30c (diff) | |
[PATCH] chardev: GPIO for SCx200 & PC-8736x: display pin values in/out in gpio_dump
Add current pin settings to gpio_dump() output. This adds the last 'word' to
the syslog lines, which displays the input and output values that the pin is
set to.
pc8736x_gpio.0: io00: 0x0044 TS OD PUE EDGE LO DEBOUNCE io:1/1
The 2 values may differ for a number of reasons:
1- the pin output circuitry is diaabled, (as the above 'TS' indicates)
2- it needs a pullup resistor to drive the attached circuit,
3- the external circuit needs a pullup so the open-drain has something
to pull-down
4- the pin is wired to Vcc or Ground
It might be appropriate to add a WARN for 2,3,4, since they could
damage the chip and/or circuit, esp if misconfig goes unnoticed.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'mm/slab.c')
0 files changed, 0 insertions, 0 deletions