diff options
| author | Sven Eckelmann | 2019-11-25 10:46:50 +0100 |
|---|---|---|
| committer | Simon Wunderlich | 2020-05-26 09:23:33 +0200 |
| commit | 9ad346c90509ebd983f60da7d082f261ad329507 (patch) | |
| tree | 6f2f61ebedfe95a733e072907ec87d440f0bd6eb /net/batman-adv | |
| parent | cf78bb0bbcef3fbe1abf118f14b81dad36eaa94e (diff) | |
batman-adv: Revert "disable ethtool link speed detection when auto negotiation off"
The commit 8c46fcd78308 ("batman-adv: disable ethtool link speed detection
when auto negotiation off") disabled the usage of ethtool's link_ksetting
when auto negotation was enabled due to invalid values when used with
tun/tap virtual net_devices. According to the patch, automatic measurements
should be used for these kind of interfaces.
But there are major flaws with this argumentation:
* automatic measurements are not implemented
* auto negotiation has nothing to do with the validity of the retrieved
values
The first point has to be fixed by a longer patch series. The "validity"
part of the second point must be addressed in the same patch series by
dropping the usage of ethtool's link_ksetting (thus always doing automatic
measurements over ethernet).
Drop the patch again to have more default values for various net_device
types/configurations. The user can still overwrite them using the
batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE.
Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Diffstat (limited to 'net/batman-adv')
| -rw-r--r-- | net/batman-adv/bat_v_elp.c | 15 |
1 files changed, 1 insertions, 14 deletions
diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index 353e49c40e7f..0bdefa35da98 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -127,20 +127,7 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh) rtnl_lock(); ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings); rtnl_unlock(); - - /* Virtual interface drivers such as tun / tap interfaces, VLAN, etc - * tend to initialize the interface throughput with some value for the - * sake of having a throughput number to export via ethtool. This - * exported throughput leaves batman-adv to conclude the interface - * throughput is genuine (reflecting reality), thus no measurements - * are necessary. - * - * Based on the observation that those interface types also tend to set - * the link auto-negotiation to 'off', batman-adv shall check this - * setting to differentiate between genuine link throughput information - * and placeholders installed by virtual interfaces. - */ - if (ret == 0 && link_settings.base.autoneg == AUTONEG_ENABLE) { + if (ret == 0) { /* link characteristics might change over time */ if (link_settings.base.duplex == DUPLEX_FULL) hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX; |