Bluetooth: hci_sync: Split hci_dev_open_sync

This splits hci_dev_open_sync so each stage is handle by its own
function so it is easier to identify each stage.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

1 files changed, 126 insertions, 99 deletions

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index e793305beb67..36a501959b6d 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -3875,90 +3875,40 @@ static const struct {
 			 "advertised, but not supported.")
 };
 
-int hci_dev_open_sync(struct hci_dev *hdev)
+/* This function handles hdev setup stage:
+ *
+ * Calls hdev->setup
+ * Setup address if HCI_QUIRK_USE_BDADDR_PROPERTY is set.
+ */
+static int hci_dev_setup_sync(struct hci_dev *hdev)
 {
 	int ret = 0;
-
-	bt_dev_dbg(hdev, "");
-
-	if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) {
-		ret = -ENODEV;
-		goto done;
-	}
+	bool invalid_bdaddr;
+	size_t i;
 
 	if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
-	    !hci_dev_test_flag(hdev, HCI_CONFIG)) {
-		/* Check for rfkill but allow the HCI setup stage to
-		 * proceed (which in itself doesn't cause any RF activity).
-		 */
-		if (hci_dev_test_flag(hdev, HCI_RFKILLED)) {
-			ret = -ERFKILL;
-			goto done;
-		}
-
-		/* Check for valid public address or a configured static
-		 * random address, but let the HCI setup proceed to
-		 * be able to determine if there is a public address
-		 * or not.
-		 *
-		 * In case of user channel usage, it is not important
-		 * if a public address or static random address is
-		 * available.
-		 *
-		 * This check is only valid for BR/EDR controllers
-		 * since AMP controllers do not have an address.
-		 */
-		if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
-		    hdev->dev_type == HCI_PRIMARY &&
-		    !bacmp(&hdev->bdaddr, BDADDR_ANY) &&
-		    !bacmp(&hdev->static_addr, BDADDR_ANY)) {
-			ret = -EADDRNOTAVAIL;
-			goto done;
-		}
-	}
-
-	if (test_bit(HCI_UP, &hdev->flags)) {
-		ret = -EALREADY;
-		goto done;
-	}
-
-	if (hdev->open(hdev)) {
-		ret = -EIO;
-		goto done;
-	}
-
-	set_bit(HCI_RUNNING, &hdev->flags);
-	hci_sock_dev_event(hdev, HCI_DEV_OPEN);
-
-	atomic_set(&hdev->cmd_cnt, 1);
-	set_bit(HCI_INIT, &hdev->flags);
-
-	if (hci_dev_test_flag(hdev, HCI_SETUP) ||
-	    test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks)) {
-		bool invalid_bdaddr;
-		size_t i;
+	    !test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks))
+		return 0;
 
-		hci_sock_dev_event(hdev, HCI_DEV_SETUP);
+	bt_dev_dbg(hdev, "");
 
-		if (hdev->setup)
-			ret = hdev->setup(hdev);
+	hci_sock_dev_event(hdev, HCI_DEV_SETUP);
 
-		for (i = 0; i < ARRAY_SIZE(hci_broken_table); i++) {
-			if (test_bit(hci_broken_table[i].quirk, &hdev->quirks))
-				bt_dev_warn(hdev, "%s",
-					    hci_broken_table[i].desc);
-		}
+	if (hdev->setup)
+		ret = hdev->setup(hdev);
 
-		/* The transport driver can set the quirk to mark the
-		 * BD_ADDR invalid before creating the HCI device or in
-		 * its setup callback.
-		 */
-		invalid_bdaddr = test_bit(HCI_QUIRK_INVALID_BDADDR,
-					  &hdev->quirks);
+	for (i = 0; i < ARRAY_SIZE(hci_broken_table); i++) {
+		if (test_bit(hci_broken_table[i].quirk, &hdev->quirks))
+			bt_dev_warn(hdev, "%s", hci_broken_table[i].desc);
+	}
 
-		if (ret)
-			goto setup_failed;
+	/* The transport driver can set the quirk to mark the
+	 * BD_ADDR invalid before creating the HCI device or in
+	 * its setup callback.
+	 */
+	invalid_bdaddr = test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
 
+	if (!ret) {
 		if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) {
 			if (!bacmp(&hdev->public_addr, BDADDR_ANY))
 				hci_dev_get_bd_addr_from_property(hdev);
@@ -3977,33 +3927,51 @@ int hci_dev_open_sync(struct hci_dev *hdev)
 					invalid_bdaddr = false;
 			}
 		}
+	}
 
-setup_failed:
-		/* The transport driver can set these quirks before
-		 * creating the HCI device or in its setup callback.
-		 *
-		 * For the invalid BD_ADDR quirk it is possible that
-		 * it becomes a valid address if the bootloader does
-		 * provide it (see above).
-		 *
-		 * In case any of them is set, the controller has to
-		 * start up as unconfigured.
-		 */
-		if (test_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks) ||
-		    invalid_bdaddr)
-			hci_dev_set_flag(hdev, HCI_UNCONFIGURED);
+	/* The transport driver can set these quirks before
+	 * creating the HCI device or in its setup callback.
+	 *
+	 * For the invalid BD_ADDR quirk it is possible that
+	 * it becomes a valid address if the bootloader does
+	 * provide it (see above).
+	 *
+	 * In case any of them is set, the controller has to
+	 * start up as unconfigured.
+	 */
+	if (test_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks) ||
+	    invalid_bdaddr)
+		hci_dev_set_flag(hdev, HCI_UNCONFIGURED);
 
-		/* For an unconfigured controller it is required to
-		 * read at least the version information provided by
-		 * the Read Local Version Information command.
-		 *
-		 * If the set_bdaddr driver callback is provided, then
-		 * also the original Bluetooth public device address
-		 * will be read using the Read BD Address command.
-		 */
-		if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED))
-			ret = hci_unconf_init_sync(hdev);
-	}
+	/* For an unconfigured controller it is required to
+	 * read at least the version information provided by
+	 * the Read Local Version Information command.
+	 *
+	 * If the set_bdaddr driver callback is provided, then
+	 * also the original Bluetooth public device address
+	 * will be read using the Read BD Address command.
+	 */
+	if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED))
+		return hci_unconf_init_sync(hdev);
+
+	return ret;
+}
+
+/* This function handles hdev init stage:
+ *
+ * Calls hci_dev_setup_sync to perform setup stage
+ * Calls hci_init_sync to perform HCI command init sequence
+ */
+static int hci_dev_init_sync(struct hci_dev *hdev)
+{
+	int ret;
+
+	bt_dev_dbg(hdev, "");
+
+	atomic_set(&hdev->cmd_cnt, 1);
+	set_bit(HCI_INIT, &hdev->flags);
+
+	ret = hci_dev_setup_sync(hdev);
 
 	if (hci_dev_test_flag(hdev, HCI_CONFIG)) {
 		/* If public address change is configured, ensure that
@@ -4043,6 +4011,65 @@ setup_failed:
 
 	clear_bit(HCI_INIT, &hdev->flags);
 
+	return ret;
+}
+
+int hci_dev_open_sync(struct hci_dev *hdev)
+{
+	int ret;
+
+	bt_dev_dbg(hdev, "");
+
+	if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) {
+		ret = -ENODEV;
+		goto done;
+	}
+
+	if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
+	    !hci_dev_test_flag(hdev, HCI_CONFIG)) {
+		/* Check for rfkill but allow the HCI setup stage to
+		 * proceed (which in itself doesn't cause any RF activity).
+		 */
+		if (hci_dev_test_flag(hdev, HCI_RFKILLED)) {
+			ret = -ERFKILL;
+			goto done;
+		}
+
+		/* Check for valid public address or a configured static
+		 * random address, but let the HCI setup proceed to
+		 * be able to determine if there is a public address
+		 * or not.
+		 *
+		 * In case of user channel usage, it is not important
+		 * if a public address or static random address is
+		 * available.
+		 *
+		 * This check is only valid for BR/EDR controllers
+		 * since AMP controllers do not have an address.
+		 */
+		if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+		    hdev->dev_type == HCI_PRIMARY &&
+		    !bacmp(&hdev->bdaddr, BDADDR_ANY) &&
+		    !bacmp(&hdev->static_addr, BDADDR_ANY)) {
+			ret = -EADDRNOTAVAIL;
+			goto done;
+		}
+	}
+
+	if (test_bit(HCI_UP, &hdev->flags)) {
+		ret = -EALREADY;
+		goto done;
+	}
+
+	if (hdev->open(hdev)) {
+		ret = -EIO;
+		goto done;
+	}
+
+	set_bit(HCI_RUNNING, &hdev->flags);
+	hci_sock_dev_event(hdev, HCI_DEV_OPEN);
+
+	ret = hci_dev_init_sync(hdev);
 	if (!ret) {
 		hci_dev_hold(hdev);
 		hci_dev_set_flag(hdev, HCI_RPA_EXPIRED);