aboutsummaryrefslogtreecommitdiff
path: root/net/wireless
diff options
context:
space:
mode:
authorThomas Pedersen2020-04-30 10:25:51 -0700
committerJohannes Berg2020-05-27 10:02:02 +0200
commit942ba88ba9c87f5e225574f1f0d6548f0105ed73 (patch)
tree2af9606122a76535fe092d28d974eb6cf19d43df /net/wireless
parente76fede8bf7c90d92c799d9ceb092dec48346e2c (diff)
nl80211: add KHz frequency offset for most wifi commands
cfg80211 recently gained the ability to understand a frequency offset component in KHz. Expose this in nl80211 through the new attributes NL80211_ATTR_WIPHY_FREQ_OFFSET, NL80211_FREQUENCY_ATTR_OFFSET, NL80211_ATTR_CENTER_FREQ1_OFFSET, and NL80211_BSS_FREQUENCY_OFFSET. These add support to send and receive a KHz offset component with the following NL80211 commands: - NL80211_CMD_FRAME - NL80211_CMD_GET_SCAN - NL80211_CMD_AUTHENTICATE - NL80211_CMD_ASSOCIATE - NL80211_CMD_CONNECT Along with any other command which takes a chandef, ie: - NL80211_CMD_SET_CHANNEL - NL80211_CMD_SET_WIPHY - NL80211_CMD_START_AP - NL80211_CMD_RADAR_DETECT - NL80211_CMD_NOTIFY_RADAR - NL80211_CMD_CHANNEL_SWITCH - NL80211_JOIN_IBSS - NL80211_CMD_REMAIN_ON_CHANNEL - NL80211_CMD_JOIN_OCB - NL80211_CMD_JOIN_MESH - NL80211_CMD_TDLS_CHANNEL_SWITCH If the driver advertises a band containing channels with frequency offset, it must also verify support for frequency offset channels in its cfg80211 ops, or return an error. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200430172554.18383-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Diffstat (limited to 'net/wireless')
-rw-r--r--net/wireless/nl80211.c78
1 files changed, 58 insertions, 20 deletions
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index f6523f1485a3..87d7efd186d0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -365,6 +365,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_CHANNEL_WIDTH] = { .type = NLA_U32 },
[NL80211_ATTR_CENTER_FREQ1] = { .type = NLA_U32 },
+ [NL80211_ATTR_CENTER_FREQ1_OFFSET] = NLA_POLICY_RANGE(NLA_U32, 0, 999),
[NL80211_ATTR_CENTER_FREQ2] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_RETRY_SHORT] = NLA_POLICY_MIN(NLA_U8, 1),
@@ -638,6 +639,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_PMK_LIFETIME] = NLA_POLICY_MIN(NLA_U32, 1),
[NL80211_ATTR_PMK_REAUTH_THRESHOLD] = NLA_POLICY_RANGE(NLA_U8, 1, 100),
[NL80211_ATTR_RECEIVE_MULTICAST] = { .type = NLA_FLAG },
+ [NL80211_ATTR_WIPHY_FREQ_OFFSET] = NLA_POLICY_RANGE(NLA_U32, 0, 999),
};
/* policy for the key attributes */
@@ -904,6 +906,9 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, struct wiphy *wiphy,
chan->center_freq))
goto nla_put_failure;
+ if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_OFFSET, chan->freq_offset))
+ goto nla_put_failure;
+
if ((chan->flags & IEEE80211_CHAN_DISABLED) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_DISABLED))
goto nla_put_failure;
@@ -1309,13 +1314,11 @@ static int nl80211_key_allowed(struct wireless_dev *wdev)
}
static struct ieee80211_channel *nl80211_get_valid_chan(struct wiphy *wiphy,
- struct nlattr *tb)
+ u32 freq)
{
struct ieee80211_channel *chan;
- if (tb == NULL)
- return NULL;
- chan = ieee80211_get_channel(wiphy, nla_get_u32(tb));
+ chan = ieee80211_get_channel_khz(wiphy, freq);
if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
return NULL;
return chan;
@@ -2770,13 +2773,17 @@ int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
if (!attrs[NL80211_ATTR_WIPHY_FREQ])
return -EINVAL;
- control_freq = nla_get_u32(attrs[NL80211_ATTR_WIPHY_FREQ]);
+ control_freq = MHZ_TO_KHZ(
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET])
+ control_freq +=
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]);
memset(chandef, 0, sizeof(*chandef));
-
- chandef->chan = ieee80211_get_channel(&rdev->wiphy, control_freq);
+ chandef->chan = ieee80211_get_channel_khz(&rdev->wiphy, control_freq);
chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
- chandef->center_freq1 = control_freq;
+ chandef->center_freq1 = KHZ_TO_MHZ(control_freq);
+ chandef->freq1_offset = control_freq % 1000;
chandef->center_freq2 = 0;
/* Primary channel not allowed */
@@ -2824,9 +2831,15 @@ int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
} else if (attrs[NL80211_ATTR_CHANNEL_WIDTH]) {
chandef->width =
nla_get_u32(attrs[NL80211_ATTR_CHANNEL_WIDTH]);
- if (attrs[NL80211_ATTR_CENTER_FREQ1])
+ if (attrs[NL80211_ATTR_CENTER_FREQ1]) {
chandef->center_freq1 =
nla_get_u32(attrs[NL80211_ATTR_CENTER_FREQ1]);
+ if (attrs[NL80211_ATTR_CENTER_FREQ1_OFFSET])
+ chandef->freq1_offset = nla_get_u32(
+ attrs[NL80211_ATTR_CENTER_FREQ1_OFFSET]);
+ else
+ chandef->freq1_offset = 0;
+ }
if (attrs[NL80211_ATTR_CENTER_FREQ2])
chandef->center_freq2 =
nla_get_u32(attrs[NL80211_ATTR_CENTER_FREQ2]);
@@ -3259,6 +3272,9 @@ static int nl80211_send_chandef(struct sk_buff *msg,
if (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ,
chandef->chan->center_freq))
return -ENOBUFS;
+ if (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ_OFFSET,
+ chandef->chan->freq_offset))
+ return -ENOBUFS;
switch (chandef->width) {
case NL80211_CHAN_WIDTH_20_NOHT:
case NL80211_CHAN_WIDTH_20:
@@ -8873,6 +8889,8 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb,
goto nla_put_failure;
if (nla_put_u16(msg, NL80211_BSS_CAPABILITY, res->capability) ||
nla_put_u32(msg, NL80211_BSS_FREQUENCY, res->channel->center_freq) ||
+ nla_put_u32(msg, NL80211_BSS_FREQUENCY_OFFSET,
+ res->channel->freq_offset) ||
nla_put_u32(msg, NL80211_BSS_CHAN_WIDTH, res->scan_width) ||
nla_put_u32(msg, NL80211_BSS_SEEN_MS_AGO,
jiffies_to_msecs(jiffies - intbss->ts)))
@@ -9141,6 +9159,7 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
enum nl80211_auth_type auth_type;
struct key_parse key;
bool local_state_change;
+ u32 freq;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
@@ -9197,8 +9216,12 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
return -EOPNOTSUPP;
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
- chan = nl80211_get_valid_chan(&rdev->wiphy,
- info->attrs[NL80211_ATTR_WIPHY_FREQ]);
+ freq = MHZ_TO_KHZ(nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET])
+ freq +=
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]);
+
+ chan = nl80211_get_valid_chan(&rdev->wiphy, freq);
if (!chan)
return -EINVAL;
@@ -9388,6 +9411,7 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
struct cfg80211_assoc_request req = {};
const u8 *bssid, *ssid;
int err, ssid_len = 0;
+ u32 freq;
if (dev->ieee80211_ptr->conn_owner_nlportid &&
dev->ieee80211_ptr->conn_owner_nlportid != info->snd_portid)
@@ -9407,8 +9431,11 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
- chan = nl80211_get_valid_chan(&rdev->wiphy,
- info->attrs[NL80211_ATTR_WIPHY_FREQ]);
+ freq = MHZ_TO_KHZ(nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET])
+ freq +=
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]);
+ chan = nl80211_get_valid_chan(&rdev->wiphy, freq);
if (!chan)
return -EINVAL;
@@ -10088,6 +10115,7 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
struct cfg80211_connect_params connect;
struct wiphy *wiphy;
struct cfg80211_cached_keys *connkeys = NULL;
+ u32 freq = 0;
int err;
memset(&connect, 0, sizeof(connect));
@@ -10158,14 +10186,21 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
connect.prev_bssid =
nla_data(info->attrs[NL80211_ATTR_PREV_BSSID]);
- if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
- connect.channel = nl80211_get_valid_chan(
- wiphy, info->attrs[NL80211_ATTR_WIPHY_FREQ]);
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ])
+ freq = MHZ_TO_KHZ(nla_get_u32(
+ info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET])
+ freq +=
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]);
+
+ if (freq) {
+ connect.channel = nl80211_get_valid_chan(wiphy, freq);
if (!connect.channel)
return -EINVAL;
} else if (info->attrs[NL80211_ATTR_WIPHY_FREQ_HINT]) {
- connect.channel_hint = nl80211_get_valid_chan(
- wiphy, info->attrs[NL80211_ATTR_WIPHY_FREQ_HINT]);
+ freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_HINT]);
+ freq = MHZ_TO_KHZ(freq);
+ connect.channel_hint = nl80211_get_valid_chan(wiphy, freq);
if (!connect.channel_hint)
return -EINVAL;
}
@@ -16215,6 +16250,7 @@ int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD) ||
nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, KHZ_TO_MHZ(freq)) ||
+ nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ_OFFSET, freq % 1000) ||
(sig_dbm &&
nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) ||
nla_put(msg, NL80211_ATTR_FRAME, len, buf) ||
@@ -16864,8 +16900,10 @@ void cfg80211_report_obss_beacon_khz(struct wiphy *wiphy, const u8 *frame,
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(freq &&
- nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ,
- KHZ_TO_MHZ(freq))) ||
+ (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ,
+ KHZ_TO_MHZ(freq)) ||
+ nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ_OFFSET,
+ freq % 1000))) ||
(sig_dbm &&
nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) ||
nla_put(msg, NL80211_ATTR_FRAME, len, frame))