samples: bpf: Add BPF support for redirect tracepoint

This adds the shared BPF file that will be used going forward for
sharing tracepoint programs among XDP redirect samples.

Since vmlinux.h conflicts with tools/include for READ_ONCE/WRITE_ONCE
and ARRAY_SIZE, they are copied in to xdp_sample.bpf.h along with other
helpers that will be required.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210821002010.845777-5-memxor@gmail.com

1 files changed, 141 insertions, 0 deletions

diff --git a/samples/bpf/xdp_sample.bpf.h b/samples/bpf/xdp_sample.bpf.h
new file mode 100644
index 000000000000..25b1dbe9b37b
--- /dev/null
+++ b/samples/bpf/xdp_sample.bpf.h
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef _XDP_SAMPLE_BPF_H
+#define _XDP_SAMPLE_BPF_H
+
+#include "vmlinux.h"
+#include <bpf/bpf_tracing.h>
+#include <bpf/bpf_core_read.h>
+#include <bpf/bpf_helpers.h>
+
+#include "xdp_sample_shared.h"
+
+#define ETH_ALEN 6
+#define ETH_P_802_3_MIN 0x0600
+#define ETH_P_8021Q 0x8100
+#define ETH_P_8021AD 0x88A8
+#define ETH_P_IP 0x0800
+#define ETH_P_IPV6 0x86DD
+#define ETH_P_ARP 0x0806
+#define IPPROTO_ICMPV6 58
+
+#define EINVAL 22
+#define ENETDOWN 100
+#define EMSGSIZE 90
+#define EOPNOTSUPP 95
+#define ENOSPC 28
+
+typedef struct {
+	__uint(type, BPF_MAP_TYPE_ARRAY);
+	__uint(map_flags, BPF_F_MMAPABLE);
+	__type(key, unsigned int);
+	__type(value, struct datarec);
+} array_map;
+
+extern array_map rx_cnt;
+extern const volatile int nr_cpus;
+
+enum {
+	XDP_REDIRECT_SUCCESS = 0,
+	XDP_REDIRECT_ERROR = 1
+};
+
+static __always_inline void swap_src_dst_mac(void *data)
+{
+	unsigned short *p = data;
+	unsigned short dst[3];
+
+	dst[0] = p[0];
+	dst[1] = p[1];
+	dst[2] = p[2];
+	p[0] = p[3];
+	p[1] = p[4];
+	p[2] = p[5];
+	p[3] = dst[0];
+	p[4] = dst[1];
+	p[5] = dst[2];
+}
+
+#if defined(__BYTE_ORDER__) && defined(__ORDER_LITTLE_ENDIAN__) && \
+	__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+#define bpf_ntohs(x)		__builtin_bswap16(x)
+#define bpf_htons(x)		__builtin_bswap16(x)
+#elif defined(__BYTE_ORDER__) && defined(__ORDER_BIG_ENDIAN__) && \
+	__BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+#define bpf_ntohs(x)		(x)
+#define bpf_htons(x)		(x)
+#else
+# error "Endianness detection needs to be set up for your compiler?!"
+#endif
+
+/*
+ * Note: including linux/compiler.h or linux/kernel.h for the macros below
+ * conflicts with vmlinux.h include in BPF files, so we define them here.
+ *
+ * Following functions are taken from kernel sources and
+ * break aliasing rules in their original form.
+ *
+ * While kernel is compiled with -fno-strict-aliasing,
+ * perf uses -Wstrict-aliasing=3 which makes build fail
+ * under gcc 4.4.
+ *
+ * Using extra __may_alias__ type to allow aliasing
+ * in this case.
+ */
+typedef __u8  __attribute__((__may_alias__))  __u8_alias_t;
+typedef __u16 __attribute__((__may_alias__)) __u16_alias_t;
+typedef __u32 __attribute__((__may_alias__)) __u32_alias_t;
+typedef __u64 __attribute__((__may_alias__)) __u64_alias_t;
+
+static __always_inline void __read_once_size(const volatile void *p, void *res, int size)
+{
+	switch (size) {
+	case 1: *(__u8_alias_t  *) res = *(volatile __u8_alias_t  *) p; break;
+	case 2: *(__u16_alias_t *) res = *(volatile __u16_alias_t *) p; break;
+	case 4: *(__u32_alias_t *) res = *(volatile __u32_alias_t *) p; break;
+	case 8: *(__u64_alias_t *) res = *(volatile __u64_alias_t *) p; break;
+	default:
+		asm volatile ("" : : : "memory");
+		__builtin_memcpy((void *)res, (const void *)p, size);
+		asm volatile ("" : : : "memory");
+	}
+}
+
+static __always_inline void __write_once_size(volatile void *p, void *res, int size)
+{
+	switch (size) {
+	case 1: *(volatile  __u8_alias_t *) p = *(__u8_alias_t  *) res; break;
+	case 2: *(volatile __u16_alias_t *) p = *(__u16_alias_t *) res; break;
+	case 4: *(volatile __u32_alias_t *) p = *(__u32_alias_t *) res; break;
+	case 8: *(volatile __u64_alias_t *) p = *(__u64_alias_t *) res; break;
+	default:
+		asm volatile ("" : : : "memory");
+		__builtin_memcpy((void *)p, (const void *)res, size);
+		asm volatile ("" : : : "memory");
+	}
+}
+
+#define READ_ONCE(x)					\
+({							\
+	union { typeof(x) __val; char __c[1]; } __u =	\
+		{ .__c = { 0 } };			\
+	__read_once_size(&(x), __u.__c, sizeof(x));	\
+	__u.__val;					\
+})
+
+#define WRITE_ONCE(x, val)				\
+({							\
+	union { typeof(x) __val; char __c[1]; } __u =	\
+		{ .__val = (val) }; 			\
+	__write_once_size(&(x), __u.__c, sizeof(x));	\
+	__u.__val;					\
+})
+
+/* Add a value using relaxed read and relaxed write. Less expensive than
+ * fetch_add when there is no write concurrency.
+ */
+#define NO_TEAR_ADD(x, val) WRITE_ONCE((x), READ_ONCE(x) + (val))
+#define NO_TEAR_INC(x) NO_TEAR_ADD((x), 1)
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+#endif