Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

4 files changed, 95 insertions, 0 deletions

diff --git a/scripts/bpf_helpers_doc.py b/scripts/bpf_helpers_doc.py
index f43d193aff3a..91fa668fa860 100755
--- a/scripts/bpf_helpers_doc.py
+++ b/scripts/bpf_helpers_doc.py
@@ -318,6 +318,11 @@ may be interested in:
   of eBPF maps are used with a given helper function.
 * *kernel/bpf/* directory contains other files in which additional helpers are
   defined (for cgroups, sockmaps, etc.).
+* The bpftool utility can be used to probe the availability of helper functions
+  on the system (as well as supported program and map types, and a number of
+  other parameters). To do so, run **bpftool feature probe** (see
+  **bpftool-feature**\ (8) for details). Add the **unprivileged** keyword to
+  list features available to unprivileged users.
 
 Compatibility between helper functions and program types can generally be found
 in the files where helper functions are defined. Look for the **struct
@@ -338,6 +343,7 @@ SEE ALSO
 ========
 
 **bpf**\ (2),
+**bpftool**\ (8),
 **cgroups**\ (7),
 **ip**\ (8),
 **perf_event_open**\ (2),
@@ -414,6 +420,7 @@ class PrinterHelpers(Printer):
             'struct sk_reuseport_md',
             'struct sockaddr',
             'struct tcphdr',
+            'struct seq_file',
 
             'struct __sk_buff',
             'struct sk_msg_md',
@@ -450,6 +457,7 @@ class PrinterHelpers(Printer):
             'struct sk_reuseport_md',
             'struct sockaddr',
             'struct tcphdr',
+            'struct seq_file',
     }
     mapped_types = {
             'u8': '__u8',
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index b83be177edf0..bf9e0e87a6ef 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -4203,6 +4203,17 @@ sub process {
 			     "ENOSYS means 'invalid syscall nr' and nothing else\n" . $herecurr);
 		}
 
+# ENOTSUPP is not a standard error code and should be avoided in new patches.
+# Folks usually mean EOPNOTSUPP (also called ENOTSUP), when they type ENOTSUPP.
+# Similarly to ENOSYS warning a small number of false positives is expected.
+		if (!$file && $line =~ /\bENOTSUPP\b/) {
+			if (WARN("ENOTSUPP",
+				 "ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP\n" . $herecurr) &&
+			    $fix) {
+				$fixed[$fixlinenr] =~ s/\bENOTSUPP\b/EOPNOTSUPP/;
+			}
+		}
+
 # function brace can't be on same line, except for #defines of do while,
 # or if closed on same line
 		if ($perl_version_ok &&
diff --git a/scripts/coccinelle/misc/newline_in_nl_msg.cocci b/scripts/coccinelle/misc/newline_in_nl_msg.cocci
new file mode 100644
index 000000000000..c175886e4015
--- /dev/null
+++ b/scripts/coccinelle/misc/newline_in_nl_msg.cocci
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+///
+/// Catch strings ending in newline with GENL_SET_ERR_MSG, NL_SET_ERR_MSG,
+/// NL_SET_ERR_MSG_MOD.
+///
+// Confidence: Very High
+// Copyright: (C) 2020 Intel Corporation
+// URL: http://coccinelle.lip6.fr/
+// Options: --no-includes --include-headers
+
+virtual context
+virtual org
+virtual report
+
+@r depends on context || org || report@
+expression e;
+constant m;
+position p;
+@@
+  \(GENL_SET_ERR_MSG\|NL_SET_ERR_MSG\|NL_SET_ERR_MSG_MOD\)(e,m@p)
+
+@script:python@
+m << r.m;
+@@
+
+if not m.endswith("\\n\""):
+	cocci.include_match(False)
+
+@r1 depends on r@
+identifier fname;
+expression r.e;
+constant r.m;
+position r.p;
+@@
+  fname(e,m@p)
+
+//----------------------------------------------------------
+//  For context mode
+//----------------------------------------------------------
+
+@depends on context && r@
+identifier r1.fname;
+expression r.e;
+constant r.m;
+@@
+* fname(e,m)
+
+//----------------------------------------------------------
+//  For org mode
+//----------------------------------------------------------
+
+@script:python depends on org@
+fname << r1.fname;
+m << r.m;
+p << r.p;
+@@
+
+if m.endswith("\\n\""):
+	msg="WARNING avoid newline at end of message in %s" % (fname)
+	msg_safe=msg.replace("[","@(").replace("]",")")
+	coccilib.org.print_todo(p[0], msg_safe)
+
+//----------------------------------------------------------
+//  For report mode
+//----------------------------------------------------------
+
+@script:python depends on report@
+fname << r1.fname;
+m << r.m;
+p << r.p;
+@@
+
+if m.endswith("\\n\""):
+	msg="WARNING avoid newline at end of message in %s" % (fname)
+	coccilib.report.print_report(p[0], msg)
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 0053d4fea847..9a98af90e625 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -2251,6 +2251,7 @@ static void add_header(struct buffer *b, struct module *mod)
 	 * Include build-salt.h after module.h in order to
 	 * inherit the definitions.
 	 */
+	buf_printf(b, "#define INCLUDE_VERMAGIC\n");
 	buf_printf(b, "#include <linux/build-salt.h>\n");
 	buf_printf(b, "#include <linux/vermagic.h>\n");
 	buf_printf(b, "#include <linux/compiler.h>\n");