diff options
author | Takashi Iwai | 2014-06-26 17:54:37 +0200 |
---|---|---|
committer | Takashi Iwai | 2014-06-26 18:00:02 +0200 |
commit | fb1d8ac29971fc48144abe5bc760f9eb3e537b9f (patch) | |
tree | 8720c2fb077f1aba0698fe2c765e3d1b8046b56b /sound/pci/hda/hda_priv.h | |
parent | c6bf1d8e8c08d37d42a3a96606470fc012cc30e7 (diff) |
ALSA: hda - Replace ICH6_ prefix
ICH6_ prefix doesn't mean that it's specific to ICH6 chipset but
rather its generic for all HD-audio (or "Azalia") devices.
Use AZX_ prefix instead to align with other constants.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/pci/hda/hda_priv.h')
-rw-r--r-- | sound/pci/hda/hda_priv.h | 172 |
1 files changed, 86 insertions, 86 deletions
diff --git a/sound/pci/hda/hda_priv.h b/sound/pci/hda/hda_priv.h index da2d3a41f8f3..33eb5d027d38 100644 --- a/sound/pci/hda/hda_priv.h +++ b/sound/pci/hda/hda_priv.h @@ -22,82 +22,82 @@ /* * registers */ -#define ICH6_REG_GCAP 0x00 -#define ICH6_GCAP_64OK (1 << 0) /* 64bit address support */ -#define ICH6_GCAP_NSDO (3 << 1) /* # of serial data out signals */ -#define ICH6_GCAP_BSS (31 << 3) /* # of bidirectional streams */ -#define ICH6_GCAP_ISS (15 << 8) /* # of input streams */ -#define ICH6_GCAP_OSS (15 << 12) /* # of output streams */ -#define ICH6_REG_VMIN 0x02 -#define ICH6_REG_VMAJ 0x03 -#define ICH6_REG_OUTPAY 0x04 -#define ICH6_REG_INPAY 0x06 -#define ICH6_REG_GCTL 0x08 -#define ICH6_GCTL_RESET (1 << 0) /* controller reset */ -#define ICH6_GCTL_FCNTRL (1 << 1) /* flush control */ -#define ICH6_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ -#define ICH6_REG_WAKEEN 0x0c -#define ICH6_REG_STATESTS 0x0e -#define ICH6_REG_GSTS 0x10 -#define ICH6_GSTS_FSTS (1 << 1) /* flush status */ -#define ICH6_REG_INTCTL 0x20 -#define ICH6_REG_INTSTS 0x24 -#define ICH6_REG_WALLCLK 0x30 /* 24Mhz source */ -#define ICH6_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ -#define ICH6_REG_SSYNC 0x38 -#define ICH6_REG_CORBLBASE 0x40 -#define ICH6_REG_CORBUBASE 0x44 -#define ICH6_REG_CORBWP 0x48 -#define ICH6_REG_CORBRP 0x4a -#define ICH6_CORBRP_RST (1 << 15) /* read pointer reset */ -#define ICH6_REG_CORBCTL 0x4c -#define ICH6_CORBCTL_RUN (1 << 1) /* enable DMA */ -#define ICH6_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ -#define ICH6_REG_CORBSTS 0x4d -#define ICH6_CORBSTS_CMEI (1 << 0) /* memory error indication */ -#define ICH6_REG_CORBSIZE 0x4e - -#define ICH6_REG_RIRBLBASE 0x50 -#define ICH6_REG_RIRBUBASE 0x54 -#define ICH6_REG_RIRBWP 0x58 -#define ICH6_RIRBWP_RST (1 << 15) /* write pointer reset */ -#define ICH6_REG_RINTCNT 0x5a -#define ICH6_REG_RIRBCTL 0x5c -#define ICH6_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ -#define ICH6_RBCTL_DMA_EN (1 << 1) /* enable DMA */ -#define ICH6_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ -#define ICH6_REG_RIRBSTS 0x5d -#define ICH6_RBSTS_IRQ (1 << 0) /* response irq */ -#define ICH6_RBSTS_OVERRUN (1 << 2) /* overrun irq */ -#define ICH6_REG_RIRBSIZE 0x5e - -#define ICH6_REG_IC 0x60 -#define ICH6_REG_IR 0x64 -#define ICH6_REG_IRS 0x68 -#define ICH6_IRS_VALID (1<<1) -#define ICH6_IRS_BUSY (1<<0) - -#define ICH6_REG_DPLBASE 0x70 -#define ICH6_REG_DPUBASE 0x74 -#define ICH6_DPLBASE_ENABLE 0x1 /* Enable position buffer */ +#define AZX_REG_GCAP 0x00 +#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */ +#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */ +#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */ +#define AZX_GCAP_ISS (15 << 8) /* # of input streams */ +#define AZX_GCAP_OSS (15 << 12) /* # of output streams */ +#define AZX_REG_VMIN 0x02 +#define AZX_REG_VMAJ 0x03 +#define AZX_REG_OUTPAY 0x04 +#define AZX_REG_INPAY 0x06 +#define AZX_REG_GCTL 0x08 +#define AZX_GCTL_RESET (1 << 0) /* controller reset */ +#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */ +#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ +#define AZX_REG_WAKEEN 0x0c +#define AZX_REG_STATESTS 0x0e +#define AZX_REG_GSTS 0x10 +#define AZX_GSTS_FSTS (1 << 1) /* flush status */ +#define AZX_REG_INTCTL 0x20 +#define AZX_REG_INTSTS 0x24 +#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */ +#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ +#define AZX_REG_SSYNC 0x38 +#define AZX_REG_CORBLBASE 0x40 +#define AZX_REG_CORBUBASE 0x44 +#define AZX_REG_CORBWP 0x48 +#define AZX_REG_CORBRP 0x4a +#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */ +#define AZX_REG_CORBCTL 0x4c +#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */ +#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ +#define AZX_REG_CORBSTS 0x4d +#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */ +#define AZX_REG_CORBSIZE 0x4e + +#define AZX_REG_RIRBLBASE 0x50 +#define AZX_REG_RIRBUBASE 0x54 +#define AZX_REG_RIRBWP 0x58 +#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */ +#define AZX_REG_RINTCNT 0x5a +#define AZX_REG_RIRBCTL 0x5c +#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ +#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */ +#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ +#define AZX_REG_RIRBSTS 0x5d +#define AZX_RBSTS_IRQ (1 << 0) /* response irq */ +#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */ +#define AZX_REG_RIRBSIZE 0x5e + +#define AZX_REG_IC 0x60 +#define AZX_REG_IR 0x64 +#define AZX_REG_IRS 0x68 +#define AZX_IRS_VALID (1<<1) +#define AZX_IRS_BUSY (1<<0) + +#define AZX_REG_DPLBASE 0x70 +#define AZX_REG_DPUBASE 0x74 +#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */ /* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; /* stream register offsets from stream base */ -#define ICH6_REG_SD_CTL 0x00 -#define ICH6_REG_SD_STS 0x03 -#define ICH6_REG_SD_LPIB 0x04 -#define ICH6_REG_SD_CBL 0x08 -#define ICH6_REG_SD_LVI 0x0c -#define ICH6_REG_SD_FIFOW 0x0e -#define ICH6_REG_SD_FIFOSIZE 0x10 -#define ICH6_REG_SD_FORMAT 0x12 -#define ICH6_REG_SD_BDLPL 0x18 -#define ICH6_REG_SD_BDLPU 0x1c +#define AZX_REG_SD_CTL 0x00 +#define AZX_REG_SD_STS 0x03 +#define AZX_REG_SD_LPIB 0x04 +#define AZX_REG_SD_CBL 0x08 +#define AZX_REG_SD_LVI 0x0c +#define AZX_REG_SD_FIFOW 0x0e +#define AZX_REG_SD_FIFOSIZE 0x10 +#define AZX_REG_SD_FORMAT 0x12 +#define AZX_REG_SD_BDLPL 0x18 +#define AZX_REG_SD_BDLPU 0x1c /* PCI space */ -#define ICH6_PCIREG_TCSEL 0x44 +#define AZX_PCIREG_TCSEL 0x44 /* * other constants @@ -140,13 +140,13 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; #define SD_STS_FIFO_READY 0x20 /* FIFO ready */ /* INTCTL and INTSTS */ -#define ICH6_INT_ALL_STREAM 0xff /* all stream interrupts */ -#define ICH6_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ -#define ICH6_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ +#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */ +#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ +#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ /* below are so far hardcoded - should read registers in future */ -#define ICH6_MAX_CORB_ENTRIES 256 -#define ICH6_MAX_RIRB_ENTRIES 256 +#define AZX_MAX_CORB_ENTRIES 256 +#define AZX_MAX_RIRB_ENTRIES 256 /* driver quirks (capabilities) */ /* bits 0-7 are used for indicating driver type */ @@ -369,29 +369,29 @@ struct azx { */ #define azx_writel(chip, reg, value) \ - ((chip)->ops->reg_writel(value, (chip)->remap_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_writel(value, (chip)->remap_addr + AZX_REG_##reg)) #define azx_readl(chip, reg) \ - ((chip)->ops->reg_readl((chip)->remap_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_readl((chip)->remap_addr + AZX_REG_##reg)) #define azx_writew(chip, reg, value) \ - ((chip)->ops->reg_writew(value, (chip)->remap_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_writew(value, (chip)->remap_addr + AZX_REG_##reg)) #define azx_readw(chip, reg) \ - ((chip)->ops->reg_readw((chip)->remap_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_readw((chip)->remap_addr + AZX_REG_##reg)) #define azx_writeb(chip, reg, value) \ - ((chip)->ops->reg_writeb(value, (chip)->remap_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_writeb(value, (chip)->remap_addr + AZX_REG_##reg)) #define azx_readb(chip, reg) \ - ((chip)->ops->reg_readb((chip)->remap_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_readb((chip)->remap_addr + AZX_REG_##reg)) #define azx_sd_writel(chip, dev, reg, value) \ - ((chip)->ops->reg_writel(value, (dev)->sd_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_writel(value, (dev)->sd_addr + AZX_REG_##reg)) #define azx_sd_readl(chip, dev, reg) \ - ((chip)->ops->reg_readl((dev)->sd_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_readl((dev)->sd_addr + AZX_REG_##reg)) #define azx_sd_writew(chip, dev, reg, value) \ - ((chip)->ops->reg_writew(value, (dev)->sd_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_writew(value, (dev)->sd_addr + AZX_REG_##reg)) #define azx_sd_readw(chip, dev, reg) \ - ((chip)->ops->reg_readw((dev)->sd_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_readw((dev)->sd_addr + AZX_REG_##reg)) #define azx_sd_writeb(chip, dev, reg, value) \ - ((chip)->ops->reg_writeb(value, (dev)->sd_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_writeb(value, (dev)->sd_addr + AZX_REG_##reg)) #define azx_sd_readb(chip, dev, reg) \ - ((chip)->ops->reg_readb((dev)->sd_addr + ICH6_REG_##reg)) + ((chip)->ops->reg_readb((dev)->sd_addr + AZX_REG_##reg)) #endif /* __SOUND_HDA_PRIV_H */ |