Merge tag 'sound-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "In this batch, you can find lots of cleanups through the whole
  subsystem, as our good New Year's resolution.  Lots of LOCs and
  commits are about LINE6 driver that was promoted finally from staging
  tree, and as usual, there've been widely spread ASoC changes.

  Here some highlights:

  ALSA core changes
   - Embedding struct device into ALSA core structures
   - sequencer core cleanups / fixes
   - PCM msbits constraints cleanups / fixes
   - New SNDRV_PCM_TRIGGER_DRAIN command
   - PCM kerneldoc fixes, header cleanups
   - PCM code cleanups using more standard codes
   - Control notification ID fixes

  Driver cleanups
   - Cleanups of PCI PM callbacks
   - Timer helper usages cleanups
   - Simplification (e.g. argument reduction) of many driver codes

  HD-audio
   - Hotkey and LED support on HP laptops with Realtek codecs
   - Dock station support on HP laptops
   - Toshiba Satellite S50D fixup
   - Enhanced wallclock timestamp handling for HD-audio
   - Componentization to simplify the linkage between i915 and hd-audio
     drivers for Intel HDMI/DP

  USB-audio
   - Akai MPC Element support
   - Enhanced timestamp handling

  ASoC
   - Lots of refactoringin ASoC core, moving drivers to more data driven
     initialization and rationalizing a lot of DAPM usage
   - Much improved handling of CDCLK clocks on Samsung I2S controllers
   - Lots of driver specific cleanups and feature improvements
   - CODEC support for TI PCM514x and TLV320AIC3104 devices
   - Board support for Tegra systems with Realtek RT5677
   - New driver for Maxim max98357a
   - More enhancements / fixes for Intel SST driver

  Others
   - Promotion of LINE6 driver from staging along with lots of rewrites
     and cleanups
   - DT support for old non-ASoC atmel driver
   - oxygen cleanups, XIO2001 init, Studio Evolution SE6x support
   - Emu8000 DRAM size detection fix on ISA(!!) AWE64 boards
   - A few more ak411x fixes for ice1724 boards"

* tag 'sound-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (542 commits)
  ALSA: line6: toneport: Use explicit type for firmware version
  ALSA: line6: Use explicit type for serial number
  ALSA: line6: Return EIO if read/write not successful
  ALSA: line6: Return error if device not responding
  ALSA: line6: Add delay before reading status
  ASoC: Intel: Clean data after SST fw fetch
  ALSA: hda - Add docking station support for another HP machine
  ALSA: control: fix failure to return new numerical ID in 'replace' event data
  ALSA: usb: update trigger timestamp on first non-zero URB submitted
  ALSA: hda: read trigger_timestamp immediately after starting DMA
  ALSA: pcm: allow for trigger_tstamp snapshot in .trigger
  ALSA: pcm: don't override timestamp unconditionally
  ALSA: off by one bug in snd_riptide_joystick_probe()
  ASoC: rt5670: Set use_single_rw flag for regmap
  ASoC: rt286: Add rt288 codec support
  ASoC: max98357a: Fix build in !CONFIG_OF case
  ASoC: Intel: fix platform_no_drv_owner.cocci warnings
  ARM: dts: Switch Odroid X2/U2 to simple-audio-card
  ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update
  ALSA: control: fix failure to return numerical ID in 'add' event
  ...

25 files changed, 4794 insertions, 77 deletions

diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index d393153c474f..a452ad7cec40 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -160,5 +160,7 @@ config SND_BCD2000
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-bcd2000.
 
+source "sound/usb/line6/Kconfig"
+
 endif	# SND_USB
 
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index bcee4060fd18..2d2d122b069f 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_SND_USB_USX2Y) += snd-usbmidi-lib.o
 obj-$(CONFIG_SND_USB_US122L) += snd-usbmidi-lib.o
 
 obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ hiface/ bcd2000/
+obj-$(CONFIG_SND_USB_LINE6)	+= line6/
diff --git a/sound/usb/card.h b/sound/usb/card.h
index 97acb906acc2..ef580b43f1e3 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -153,6 +153,8 @@ struct snd_usb_substream {
 		int channel;
 		int byte_idx;
 	} dsd_dop;
+
+	bool trigger_tstamp_pending_update; /* trigger timestamp being updated from initial estimate */
 };
 
 struct snd_usb_stream {
diff --git a/sound/usb/line6/Kconfig b/sound/usb/line6/Kconfig
new file mode 100644
index 000000000000..f4585d378ef3
--- /dev/null
+++ b/sound/usb/line6/Kconfig
@@ -0,0 +1,42 @@
+config SND_USB_LINE6
+	tristate
+	select SND_RAWMIDI
+	select SND_PCM
+
+config SND_USB_POD
+	tristate "Line 6 POD USB support"
+	select SND_USB_LINE6
+	help
+	  This is a driver for PODxt and other similar devices,
+	  supporting the following features:
+	    * Reading/writing individual parameters
+	    * Reading/writing complete channel, effects setup, and amp
+	      setup data
+	    * Channel switching
+	    * Virtual MIDI interface
+	    * Tuner access
+	    * Playback/capture/mixer device for any ALSA-compatible PCM
+	      audio application
+	    * Signal routing (record clean/processed guitar signal,
+	      re-amping)
+
+config SND_USB_PODHD
+	tristate "Line 6 POD HD300/400/500 USB support"
+	select SND_USB_LINE6
+	help
+	  This is a driver for POD HD300, 400 and 500 devices.
+
+config SND_USB_TONEPORT
+	tristate "TonePort GX, UX1 and UX2 USB support"
+	select SND_USB_LINE6
+	select NEW_LEDS
+	select LEDS_CLASS
+	help
+	  This is a driver for TonePort GX, UX1 and UX2 devices.
+
+config SND_USB_VARIAX
+	tristate "Variax Workbench USB support"
+	select SND_USB_LINE6
+	help
+	  This is a driver for Variax Workbench device.
+
diff --git a/sound/usb/line6/Makefile b/sound/usb/line6/Makefile
new file mode 100644
index 000000000000..b8b3b2a543d8
--- /dev/null
+++ b/sound/usb/line6/Makefile
@@ -0,0 +1,18 @@
+snd-usb-line6-y := 		\
+		capture.o	\
+		driver.o	\
+		midi.o		\
+		midibuf.o	\
+		pcm.o		\
+		playback.o
+
+snd-usb-pod-y := pod.o
+snd-usb-podhd-y := podhd.o
+snd-usb-toneport-y := toneport.o
+snd-usb-variax-y := variax.o
+
+obj-$(CONFIG_SND_USB_LINE6)	+= snd-usb-line6.o
+obj-$(CONFIG_SND_USB_POD)	+= snd-usb-pod.o
+obj-$(CONFIG_SND_USB_PODHD)	+= snd-usb-podhd.o
+obj-$(CONFIG_SND_USB_TONEPORT)	+= snd-usb-toneport.o
+obj-$(CONFIG_SND_USB_VARIAX)	+= snd-usb-variax.o
diff --git a/sound/usb/line6/capture.c b/sound/usb/line6/capture.c
new file mode 100644
index 000000000000..f518fbbe88de
--- /dev/null
+++ b/sound/usb/line6/capture.c
@@ -0,0 +1,275 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "pcm.h"
+
+/*
+	Find a free URB and submit it.
+	must be called in line6pcm->in.lock context
+*/
+static int submit_audio_in_urb(struct snd_line6_pcm *line6pcm)
+{
+	int index;
+	int i, urb_size;
+	int ret;
+	struct urb *urb_in;
+
+	index =
+	    find_first_zero_bit(&line6pcm->in.active_urbs, LINE6_ISO_BUFFERS);
+
+	if (index < 0 || index >= LINE6_ISO_BUFFERS) {
+		dev_err(line6pcm->line6->ifcdev, "no free URB found\n");
+		return -EINVAL;
+	}
+
+	urb_in = line6pcm->in.urbs[index];
+	urb_size = 0;
+
+	for (i = 0; i < LINE6_ISO_PACKETS; ++i) {
+		struct usb_iso_packet_descriptor *fin =
+		    &urb_in->iso_frame_desc[i];
+		fin->offset = urb_size;
+		fin->length = line6pcm->max_packet_size;
+		urb_size += line6pcm->max_packet_size;
+	}
+
+	urb_in->transfer_buffer =
+	    line6pcm->in.buffer +
+	    index * LINE6_ISO_PACKETS * line6pcm->max_packet_size;
+	urb_in->transfer_buffer_length = urb_size;
+	urb_in->context = line6pcm;
+
+	ret = usb_submit_urb(urb_in, GFP_ATOMIC);
+
+	if (ret == 0)
+		set_bit(index, &line6pcm->in.active_urbs);
+	else
+		dev_err(line6pcm->line6->ifcdev,
+			"URB in #%d submission failed (%d)\n", index, ret);
+
+	return 0;
+}
+
+/*
+	Submit all currently available capture URBs.
+	must be called in line6pcm->in.lock context
+*/
+int line6_submit_audio_in_all_urbs(struct snd_line6_pcm *line6pcm)
+{
+	int ret = 0, i;
+
+	for (i = 0; i < LINE6_ISO_BUFFERS; ++i) {
+		ret = submit_audio_in_urb(line6pcm);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+/*
+	Copy data into ALSA capture buffer.
+*/
+void line6_capture_copy(struct snd_line6_pcm *line6pcm, char *fbuf, int fsize)
+{
+	struct snd_pcm_substream *substream =
+	    get_substream(line6pcm, SNDRV_PCM_STREAM_CAPTURE);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	const int bytes_per_frame = line6pcm->properties->bytes_per_frame;
+	int frames = fsize / bytes_per_frame;
+
+	if (runtime == NULL)
+		return;
+
+	if (line6pcm->in.pos_done + frames > runtime->buffer_size) {
+		/*
+		   The transferred area goes over buffer boundary,
+		   copy two separate chunks.
+		 */
+		int len;
+
+		len = runtime->buffer_size - line6pcm->in.pos_done;
+
+		if (len > 0) {
+			memcpy(runtime->dma_area +
+			       line6pcm->in.pos_done * bytes_per_frame, fbuf,
+			       len * bytes_per_frame);
+			memcpy(runtime->dma_area, fbuf + len * bytes_per_frame,
+			       (frames - len) * bytes_per_frame);
+		} else {
+			/* this is somewhat paranoid */
+			dev_err(line6pcm->line6->ifcdev,
+				"driver bug: len = %d\n", len);
+		}
+	} else {
+		/* copy single chunk */
+		memcpy(runtime->dma_area +
+		       line6pcm->in.pos_done * bytes_per_frame, fbuf, fsize);
+	}
+
+	line6pcm->in.pos_done += frames;
+	if (line6pcm->in.pos_done >= runtime->buffer_size)
+		line6pcm->in.pos_done -= runtime->buffer_size;
+}
+
+void line6_capture_check_period(struct snd_line6_pcm *line6pcm, int length)
+{
+	struct snd_pcm_substream *substream =
+	    get_substream(line6pcm, SNDRV_PCM_STREAM_CAPTURE);
+
+	line6pcm->in.bytes += length;
+	if (line6pcm->in.bytes >= line6pcm->in.period) {
+		line6pcm->in.bytes %= line6pcm->in.period;
+		spin_unlock(&line6pcm->in.lock);
+		snd_pcm_period_elapsed(substream);
+		spin_lock(&line6pcm->in.lock);
+	}
+}
+
+/*
+ * Callback for completed capture URB.
+ */
+static void audio_in_callback(struct urb *urb)
+{
+	int i, index, length = 0, shutdown = 0;
+	unsigned long flags;
+
+	struct snd_line6_pcm *line6pcm = (struct snd_line6_pcm *)urb->context;
+
+	line6pcm->in.last_frame = urb->start_frame;
+
+	/* find index of URB */
+	for (index = 0; index < LINE6_ISO_BUFFERS; ++index)
+		if (urb == line6pcm->in.urbs[index])
+			break;
+
+	spin_lock_irqsave(&line6pcm->in.lock, flags);
+
+	for (i = 0; i < LINE6_ISO_PACKETS; ++i) {
+		char *fbuf;
+		int fsize;
+		struct usb_iso_packet_descriptor *fin = &urb->iso_frame_desc[i];
+
+		if (fin->status == -EXDEV) {
+			shutdown = 1;
+			break;
+		}
+
+		fbuf = urb->transfer_buffer + fin->offset;
+		fsize = fin->actual_length;
+
+		if (fsize > line6pcm->max_packet_size) {
+			dev_err(line6pcm->line6->ifcdev,
+				"driver and/or device bug: packet too large (%d > %d)\n",
+				fsize, line6pcm->max_packet_size);
+		}
+
+		length += fsize;
+
+		/* the following assumes LINE6_ISO_PACKETS == 1: */
+		line6pcm->prev_fbuf = fbuf;
+		line6pcm->prev_fsize = fsize;
+
+		if (!test_bit(LINE6_STREAM_IMPULSE, &line6pcm->in.running) &&
+		    test_bit(LINE6_STREAM_PCM, &line6pcm->in.running) &&
+		    fsize > 0)
+			line6_capture_copy(line6pcm, fbuf, fsize);
+	}
+
+	clear_bit(index, &line6pcm->in.active_urbs);
+
+	if (test_and_clear_bit(index, &line6pcm->in.unlink_urbs))
+		shutdown = 1;
+
+	if (!shutdown) {
+		submit_audio_in_urb(line6pcm);
+
+		if (!test_bit(LINE6_STREAM_IMPULSE, &line6pcm->in.running) &&
+		    test_bit(LINE6_STREAM_PCM, &line6pcm->in.running))
+			line6_capture_check_period(line6pcm, length);
+	}
+
+	spin_unlock_irqrestore(&line6pcm->in.lock, flags);
+}
+
+/* open capture callback */
+static int snd_line6_capture_open(struct snd_pcm_substream *substream)
+{
+	int err;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+
+	err = snd_pcm_hw_constraint_ratdens(runtime, 0,
+					    SNDRV_PCM_HW_PARAM_RATE,
+					    &line6pcm->properties->rates);
+	if (err < 0)
+		return err;
+
+	runtime->hw = line6pcm->properties->capture_hw;
+	return 0;
+}
+
+/* close capture callback */
+static int snd_line6_capture_close(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+/* capture operators */
+struct snd_pcm_ops snd_line6_capture_ops = {
+	.open = snd_line6_capture_open,
+	.close = snd_line6_capture_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = snd_line6_hw_params,
+	.hw_free = snd_line6_hw_free,
+	.prepare = snd_line6_prepare,
+	.trigger = snd_line6_trigger,
+	.pointer = snd_line6_pointer,
+};
+
+int line6_create_audio_in_urbs(struct snd_line6_pcm *line6pcm)
+{
+	struct usb_line6 *line6 = line6pcm->line6;
+	int i;
+
+	/* create audio URBs and fill in constant values: */
+	for (i = 0; i < LINE6_ISO_BUFFERS; ++i) {
+		struct urb *urb;
+
+		/* URB for audio in: */
+		urb = line6pcm->in.urbs[i] =
+		    usb_alloc_urb(LINE6_ISO_PACKETS, GFP_KERNEL);
+
+		if (urb == NULL)
+			return -ENOMEM;
+
+		urb->dev = line6->usbdev;
+		urb->pipe =
+		    usb_rcvisocpipe(line6->usbdev,
+				    line6->properties->ep_audio_r &
+				    USB_ENDPOINT_NUMBER_MASK);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->start_frame = -1;
+		urb->number_of_packets = LINE6_ISO_PACKETS;
+		urb->interval = LINE6_ISO_INTERVAL;
+		urb->error_count = 0;
+		urb->complete = audio_in_callback;
+	}
+
+	return 0;
+}
diff --git a/sound/usb/line6/capture.h b/sound/usb/line6/capture.h
new file mode 100644
index 000000000000..890b21bff18c
--- /dev/null
+++ b/sound/usb/line6/capture.h
@@ -0,0 +1,29 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#ifndef CAPTURE_H
+#define CAPTURE_H
+
+#include <sound/pcm.h>
+
+#include "driver.h"
+#include "pcm.h"
+
+extern struct snd_pcm_ops snd_line6_capture_ops;
+
+extern void line6_capture_copy(struct snd_line6_pcm *line6pcm, char *fbuf,
+			       int fsize);
+extern void line6_capture_check_period(struct snd_line6_pcm *line6pcm,
+				       int length);
+extern int line6_create_audio_in_urbs(struct snd_line6_pcm *line6pcm);
+extern int line6_submit_audio_in_all_urbs(struct snd_line6_pcm *line6pcm);
+
+#endif
diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
new file mode 100644
index 000000000000..99b63a7902f3
--- /dev/null
+++ b/sound/usb/line6/driver.c
@@ -0,0 +1,666 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "midi.h"
+#include "playback.h"
+
+#define DRIVER_AUTHOR  "Markus Grabner <grabner@icg.tugraz.at>"
+#define DRIVER_DESC    "Line 6 USB Driver"
+
+/*
+	This is Line 6's MIDI manufacturer ID.
+*/
+const unsigned char line6_midi_id[] = {
+	0x00, 0x01, 0x0c
+};
+EXPORT_SYMBOL_GPL(line6_midi_id);
+
+/*
+	Code to request version of POD, Variax interface
+	(and maybe other devices).
+*/
+static const char line6_request_version[] = {
+	0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7
+};
+
+/*
+	 Class for asynchronous messages.
+*/
+struct message {
+	struct usb_line6 *line6;
+	const char *buffer;
+	int size;
+	int done;
+};
+
+/*
+	Forward declarations.
+*/
+static void line6_data_received(struct urb *urb);
+static int line6_send_raw_message_async_part(struct message *msg,
+					     struct urb *urb);
+
+/*
+	Start to listen on endpoint.
+*/
+static int line6_start_listen(struct usb_line6 *line6)
+{
+	int err;
+
+	usb_fill_int_urb(line6->urb_listen, line6->usbdev,
+		usb_rcvintpipe(line6->usbdev, line6->properties->ep_ctrl_r),
+		line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
+		line6_data_received, line6, line6->interval);
+	line6->urb_listen->actual_length = 0;
+	err = usb_submit_urb(line6->urb_listen, GFP_ATOMIC);
+	return err;
+}
+
+/*
+	Stop listening on endpoint.
+*/
+static void line6_stop_listen(struct usb_line6 *line6)
+{
+	usb_kill_urb(line6->urb_listen);
+}
+
+/*
+	Send raw message in pieces of wMaxPacketSize bytes.
+*/
+static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
+				  int size)
+{
+	int i, done = 0;
+
+	for (i = 0; i < size; i += line6->max_packet_size) {
+		int partial;
+		const char *frag_buf = buffer + i;
+		int frag_size = min(line6->max_packet_size, size - i);
+		int retval;
+
+		retval = usb_interrupt_msg(line6->usbdev,
+					usb_sndintpipe(line6->usbdev,
+						line6->properties->ep_ctrl_w),
+					(char *)frag_buf, frag_size,
+					&partial, LINE6_TIMEOUT * HZ);
+
+		if (retval) {
+			dev_err(line6->ifcdev,
+				"usb_interrupt_msg failed (%d)\n", retval);
+			break;
+		}
+
+		done += frag_size;
+	}
+
+	return done;
+}
+
+/*
+	Notification of completion of asynchronous request transmission.
+*/
+static void line6_async_request_sent(struct urb *urb)
+{
+	struct message *msg = (struct message *)urb->context;
+
+	if (msg->done >= msg->size) {
+		usb_free_urb(urb);
+		kfree(msg);
+	} else
+		line6_send_raw_message_async_part(msg, urb);
+}
+
+/*
+	Asynchronously send part of a raw message.
+*/
+static int line6_send_raw_message_async_part(struct message *msg,
+					     struct urb *urb)
+{
+	int retval;
+	struct usb_line6 *line6 = msg->line6;
+	int done = msg->done;
+	int bytes = min(msg->size - done, line6->max_packet_size);
+
+	usb_fill_int_urb(urb, line6->usbdev,
+		usb_sndintpipe(line6->usbdev, line6->properties->ep_ctrl_w),
+		(char *)msg->buffer + done, bytes,
+		line6_async_request_sent, msg, line6->interval);
+
+	msg->done += bytes;
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+
+	if (retval < 0) {
+		dev_err(line6->ifcdev, "%s: usb_submit_urb failed (%d)\n",
+			__func__, retval);
+		usb_free_urb(urb);
+		kfree(msg);
+		return retval;
+	}
+
+	return 0;
+}
+
+/*
+	Setup and start timer.
+*/
+void line6_start_timer(struct timer_list *timer, unsigned long msecs,
+		       void (*function)(unsigned long), unsigned long data)
+{
+	setup_timer(timer, function, data);
+	mod_timer(timer, jiffies + msecs_to_jiffies(msecs));
+}
+EXPORT_SYMBOL_GPL(line6_start_timer);
+
+/*
+	Asynchronously send raw message.
+*/
+int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
+				 int size)
+{
+	struct message *msg;
+	struct urb *urb;
+
+	/* create message: */
+	msg = kmalloc(sizeof(struct message), GFP_ATOMIC);
+	if (msg == NULL)
+		return -ENOMEM;
+
+	/* create URB: */
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+
+	if (urb == NULL) {
+		kfree(msg);
+		return -ENOMEM;
+	}
+
+	/* set message data: */
+	msg->line6 = line6;
+	msg->buffer = buffer;
+	msg->size = size;
+	msg->done = 0;
+
+	/* start sending: */
+	return line6_send_raw_message_async_part(msg, urb);
+}
+EXPORT_SYMBOL_GPL(line6_send_raw_message_async);
+
+/*
+	Send asynchronous device version request.
+*/
+int line6_version_request_async(struct usb_line6 *line6)
+{
+	char *buffer;
+	int retval;
+
+	buffer = kmemdup(line6_request_version,
+			sizeof(line6_request_version), GFP_ATOMIC);
+	if (buffer == NULL)
+		return -ENOMEM;
+
+	retval = line6_send_raw_message_async(line6, buffer,
+					      sizeof(line6_request_version));
+	kfree(buffer);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(line6_version_request_async);
+
+/*
+	Send sysex message in pieces of wMaxPacketSize bytes.
+*/
+int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
+			     int size)
+{
+	return line6_send_raw_message(line6, buffer,
+				      size + SYSEX_EXTRA_SIZE) -
+	    SYSEX_EXTRA_SIZE;
+}
+EXPORT_SYMBOL_GPL(line6_send_sysex_message);
+
+/*
+	Allocate buffer for sysex message and prepare header.
+	@param code sysex message code
+	@param size number of bytes between code and sysex end
+*/
+char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2,
+			       int size)
+{
+	char *buffer = kmalloc(size + SYSEX_EXTRA_SIZE, GFP_ATOMIC);
+
+	if (!buffer)
+		return NULL;
+
+	buffer[0] = LINE6_SYSEX_BEGIN;
+	memcpy(buffer + 1, line6_midi_id, sizeof(line6_midi_id));
+	buffer[sizeof(line6_midi_id) + 1] = code1;
+	buffer[sizeof(line6_midi_id) + 2] = code2;
+	buffer[sizeof(line6_midi_id) + 3 + size] = LINE6_SYSEX_END;
+	return buffer;
+}
+EXPORT_SYMBOL_GPL(line6_alloc_sysex_buffer);
+
+/*
+	Notification of data received from the Line 6 device.
+*/
+static void line6_data_received(struct urb *urb)
+{
+	struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
+	struct midi_buffer *mb = &line6->line6midi->midibuf_in;
+	int done;
+
+	if (urb->status == -ESHUTDOWN)
+		return;
+
+	done =
+	    line6_midibuf_write(mb, urb->transfer_buffer, urb->actual_length);
+
+	if (done < urb->actual_length) {
+		line6_midibuf_ignore(mb, done);
+		dev_dbg(line6->ifcdev, "%d %d buffer overflow - message skipped\n",
+			done, urb->actual_length);
+	}
+
+	for (;;) {
+		done =
+		    line6_midibuf_read(mb, line6->buffer_message,
+				       LINE6_MESSAGE_MAXLEN);
+
+		if (done == 0)
+			break;
+
+		line6->message_length = done;
+		line6_midi_receive(line6, line6->buffer_message, done);
+
+		if (line6->process_message)
+			line6->process_message(line6);
+	}
+
+	line6_start_listen(line6);
+}
+
+#define LINE6_READ_WRITE_STATUS_DELAY 2  /* milliseconds */
+#define LINE6_READ_WRITE_MAX_RETRIES 50
+
+/*
+	Read data from device.
+*/
+int line6_read_data(struct usb_line6 *line6, int address, void *data,
+		    size_t datalen)
+{
+	struct usb_device *usbdev = line6->usbdev;
+	int ret;
+	unsigned char len;
+	unsigned count;
+
+	/* query the serial number: */
+	ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
+			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+			      (datalen << 8) | 0x21, address,
+			      NULL, 0, LINE6_TIMEOUT * HZ);
+
+	if (ret < 0) {
+		dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
+		return ret;
+	}
+
+	/* Wait for data length. We'll get 0xff until length arrives. */
+	for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
+		mdelay(LINE6_READ_WRITE_STATUS_DELAY);
+
+		ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
+				      USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+				      USB_DIR_IN,
+				      0x0012, 0x0000, &len, 1,
+				      LINE6_TIMEOUT * HZ);
+		if (ret < 0) {
+			dev_err(line6->ifcdev,
+				"receive length failed (error %d)\n", ret);
+			return ret;
+		}
+
+		if (len != 0xff)
+			break;
+	}
+
+	if (len == 0xff) {
+		dev_err(line6->ifcdev, "read failed after %d retries\n",
+			count);
+		return -EIO;
+	} else if (len != datalen) {
+		/* should be equal or something went wrong */
+		dev_err(line6->ifcdev,
+			"length mismatch (expected %d, got %d)\n",
+			(int)datalen, (int)len);
+		return -EIO;
+	}
+
+	/* receive the result: */
+	ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
+			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			      0x0013, 0x0000, data, datalen,
+			      LINE6_TIMEOUT * HZ);
+
+	if (ret < 0) {
+		dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_read_data);
+
+/*
+	Write data to device.
+*/
+int line6_write_data(struct usb_line6 *line6, int address, void *data,
+		     size_t datalen)
+{
+	struct usb_device *usbdev = line6->usbdev;
+	int ret;
+	unsigned char status;
+	int count;
+
+	ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
+			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+			      0x0022, address, data, datalen,
+			      LINE6_TIMEOUT * HZ);
+
+	if (ret < 0) {
+		dev_err(line6->ifcdev,
+			"write request failed (error %d)\n", ret);
+		return ret;
+	}
+
+	for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
+		mdelay(LINE6_READ_WRITE_STATUS_DELAY);
+
+		ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
+				      0x67,
+				      USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+				      USB_DIR_IN,
+				      0x0012, 0x0000,
+				      &status, 1, LINE6_TIMEOUT * HZ);
+
+		if (ret < 0) {
+			dev_err(line6->ifcdev,
+				"receiving status failed (error %d)\n", ret);
+			return ret;
+		}
+
+		if (status != 0xff)
+			break;
+	}
+
+	if (status == 0xff) {
+		dev_err(line6->ifcdev, "write failed after %d retries\n",
+			count);
+		return -EIO;
+	} else if (status != 0) {
+		dev_err(line6->ifcdev, "write failed (error %d)\n", ret);
+		return -EIO;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_write_data);
+
+/*
+	Read Line 6 device serial number.
+	(POD, TonePort, GuitarPort)
+*/
+int line6_read_serial_number(struct usb_line6 *line6, u32 *serial_number)
+{
+	return line6_read_data(line6, 0x80d0, serial_number,
+			       sizeof(*serial_number));
+}
+EXPORT_SYMBOL_GPL(line6_read_serial_number);
+
+/*
+	Card destructor.
+*/
+static void line6_destruct(struct snd_card *card)
+{
+	struct usb_line6 *line6 = card->private_data;
+	struct usb_device *usbdev = line6->usbdev;
+
+	/* free buffer memory first: */
+	kfree(line6->buffer_message);
+	kfree(line6->buffer_listen);
+
+	/* then free URBs: */
+	usb_free_urb(line6->urb_listen);
+
+	/* decrement reference counters: */
+	usb_put_dev(usbdev);
+}
+
+/* get data from endpoint descriptor (see usb_maxpacket): */
+static void line6_get_interval(struct usb_line6 *line6)
+{
+	struct usb_device *usbdev = line6->usbdev;
+	struct usb_host_endpoint *ep;
+	unsigned pipe = usb_rcvintpipe(usbdev, line6->properties->ep_ctrl_r);
+	unsigned epnum = usb_pipeendpoint(pipe);
+
+	ep = usbdev->ep_in[epnum];
+	if (ep) {
+		line6->interval = ep->desc.bInterval;
+		line6->max_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
+	} else {
+		dev_err(line6->ifcdev,
+			"endpoint not available, using fallback values");
+		line6->interval = LINE6_FALLBACK_INTERVAL;
+		line6->max_packet_size = LINE6_FALLBACK_MAXPACKETSIZE;
+	}
+}
+
+static int line6_init_cap_control(struct usb_line6 *line6)
+{
+	int ret;
+
+	/* initialize USB buffers: */
+	line6->buffer_listen = kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
+	if (!line6->buffer_listen)
+		return -ENOMEM;
+
+	line6->buffer_message = kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL);
+	if (!line6->buffer_message)
+		return -ENOMEM;
+
+	line6->urb_listen = usb_alloc_urb(0, GFP_KERNEL);
+	if (!line6->urb_listen)
+		return -ENOMEM;
+
+	ret = line6_start_listen(line6);
+	if (ret < 0) {
+		dev_err(line6->ifcdev, "cannot start listening: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+	Probe USB device.
+*/
+int line6_probe(struct usb_interface *interface,
+		const struct usb_device_id *id,
+		const char *driver_name,
+		const struct line6_properties *properties,
+		int (*private_init)(struct usb_line6 *, const struct usb_device_id *id),
+		size_t data_size)
+{
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+	struct snd_card *card;
+	struct usb_line6 *line6;
+	int interface_number;
+	int ret;
+
+	if (WARN_ON(data_size < sizeof(*line6)))
+		return -EINVAL;
+
+	/* we don't handle multiple configurations */
+	if (usbdev->descriptor.bNumConfigurations != 1)
+		return -ENODEV;
+
+	ret = snd_card_new(&interface->dev,
+			   SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+			   THIS_MODULE, data_size, &card);
+	if (ret < 0)
+		return ret;
+
+	/* store basic data: */
+	line6 = card->private_data;
+	line6->card = card;
+	line6->properties = properties;
+	line6->usbdev = usbdev;
+	line6->ifcdev = &interface->dev;
+
+	strcpy(card->id, properties->id);
+	strcpy(card->driver, driver_name);
+	strcpy(card->shortname, properties->name);
+	sprintf(card->longname, "Line 6 %s at USB %s", properties->name,
+		dev_name(line6->ifcdev));
+	card->private_free = line6_destruct;
+
+	usb_set_intfdata(interface, line6);
+
+	/* increment reference counters: */
+	usb_get_dev(usbdev);
+
+	/* initialize device info: */
+	dev_info(&interface->dev, "Line 6 %s found\n", properties->name);
+
+	/* query interface number */
+	interface_number = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	ret = usb_set_interface(usbdev, interface_number,
+				properties->altsetting);
+	if (ret < 0) {
+		dev_err(&interface->dev, "set_interface failed\n");
+		goto error;
+	}
+
+	line6_get_interval(line6);
+
+	if (properties->capabilities & LINE6_CAP_CONTROL) {
+		ret = line6_init_cap_control(line6);
+		if (ret < 0)
+			goto error;
+	}
+
+	/* initialize device data based on device: */
+	ret = private_init(line6, id);
+	if (ret < 0)
+		goto error;
+
+	/* creation of additional special files should go here */
+
+	dev_info(&interface->dev, "Line 6 %s now attached\n",
+		 properties->name);
+
+	return 0;
+
+ error:
+	if (line6->disconnect)
+		line6->disconnect(line6);
+	snd_card_free(card);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(line6_probe);
+
+/*
+	Line 6 device disconnected.
+*/
+void line6_disconnect(struct usb_interface *interface)
+{
+	struct usb_line6 *line6 = usb_get_intfdata(interface);
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+
+	if (!line6)
+		return;
+
+	if (WARN_ON(usbdev != line6->usbdev))
+		return;
+
+	if (line6->urb_listen != NULL)
+		line6_stop_listen(line6);
+
+	snd_card_disconnect(line6->card);
+	if (line6->line6pcm)
+		line6_pcm_disconnect(line6->line6pcm);
+	if (line6->disconnect)
+		line6->disconnect(line6);
+
+	dev_info(&interface->dev, "Line 6 %s now disconnected\n",
+		 line6->properties->name);
+
+	/* make sure the device isn't destructed twice: */
+	usb_set_intfdata(interface, NULL);
+
+	snd_card_free_when_closed(line6->card);
+}
+EXPORT_SYMBOL_GPL(line6_disconnect);
+
+#ifdef CONFIG_PM
+
+/*
+	Suspend Line 6 device.
+*/
+int line6_suspend(struct usb_interface *interface, pm_message_t message)
+{
+	struct usb_line6 *line6 = usb_get_intfdata(interface);
+	struct snd_line6_pcm *line6pcm = line6->line6pcm;
+
+	snd_power_change_state(line6->card, SNDRV_CTL_POWER_D3hot);
+
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL)
+		line6_stop_listen(line6);
+
+	if (line6pcm != NULL) {
+		snd_pcm_suspend_all(line6pcm->pcm);
+		line6pcm->flags = 0;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_suspend);
+
+/*
+	Resume Line 6 device.
+*/
+int line6_resume(struct usb_interface *interface)
+{
+	struct usb_line6 *line6 = usb_get_intfdata(interface);
+
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL)
+		line6_start_listen(line6);
+
+	snd_power_change_state(line6->card, SNDRV_CTL_POWER_D0);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_resume);
+
+#endif /* CONFIG_PM */
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h
new file mode 100644
index 000000000000..5d20294d64f4
--- /dev/null
+++ b/sound/usb/line6/driver.h
@@ -0,0 +1,181 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#ifndef DRIVER_H
+#define DRIVER_H
+
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <sound/core.h>
+
+#include "midi.h"
+
+#define USB_INTERVALS_PER_SECOND 1000
+
+/* Fallback USB interval and max packet size values */
+#define LINE6_FALLBACK_INTERVAL 10
+#define LINE6_FALLBACK_MAXPACKETSIZE 16
+
+#define LINE6_TIMEOUT 1
+#define LINE6_BUFSIZE_LISTEN 32
+#define LINE6_MESSAGE_MAXLEN 256
+
+/*
+	Line 6 MIDI control commands
+*/
+#define LINE6_PARAM_CHANGE   0xb0
+#define LINE6_PROGRAM_CHANGE 0xc0
+#define LINE6_SYSEX_BEGIN    0xf0
+#define LINE6_SYSEX_END      0xf7
+#define LINE6_RESET          0xff
+
+/*
+	MIDI channel for messages initiated by the host
+	(and eventually echoed back by the device)
+*/
+#define LINE6_CHANNEL_HOST   0x00
+
+/*
+	MIDI channel for messages initiated by the device
+*/
+#define LINE6_CHANNEL_DEVICE 0x02
+
+#define LINE6_CHANNEL_UNKNOWN 5	/* don't know yet what this is good for */
+
+#define LINE6_CHANNEL_MASK 0x0f
+
+#define CHECK_STARTUP_PROGRESS(x, n)	\
+do {					\
+	if ((x) >= (n))			\
+		return;			\
+	x = (n);			\
+} while (0)
+
+extern const unsigned char line6_midi_id[3];
+
+static const int SYSEX_DATA_OFS = sizeof(line6_midi_id) + 3;
+static const int SYSEX_EXTRA_SIZE = sizeof(line6_midi_id) + 4;
+
+/*
+	 Common properties of Line 6 devices.
+*/
+struct line6_properties {
+	/* Card id string (maximum 16 characters).
+	 * This can be used to address the device in ALSA programs as
+	 * "default:CARD=<id>"
+	 */
+	const char *id;
+
+	/* Card short name (maximum 32 characters) */
+	const char *name;
+
+	/* Bit vector defining this device's capabilities in line6usb driver */
+	int capabilities;
+
+	int altsetting;
+
+	unsigned ep_ctrl_r;
+	unsigned ep_ctrl_w;
+	unsigned ep_audio_r;
+	unsigned ep_audio_w;
+};
+
+/* Capability bits */
+enum {
+	/* device supports settings parameter via USB */
+	LINE6_CAP_CONTROL =	1 << 0,
+	/* device supports PCM input/output via USB */
+	LINE6_CAP_PCM =		1 << 1,
+	/* device support hardware monitoring */
+	LINE6_CAP_HWMON =	1 << 2,
+};
+
+/*
+	 Common data shared by all Line 6 devices.
+	 Corresponds to a pair of USB endpoints.
+*/
+struct usb_line6 {
+	/* USB device */
+	struct usb_device *usbdev;
+
+	/* Properties */
+	const struct line6_properties *properties;
+
+	/* Interval (ms) */
+	int interval;
+
+	/* Maximum size of USB packet */
+	int max_packet_size;
+
+	/* Device representing the USB interface */
+	struct device *ifcdev;
+
+	/* Line 6 sound card data structure.
+	 * Each device has at least MIDI or PCM.
+	 */
+	struct snd_card *card;
+
+	/* Line 6 PCM device data structure */
+	struct snd_line6_pcm *line6pcm;
+
+	/* Line 6 MIDI device data structure */
+	struct snd_line6_midi *line6midi;
+
+	/* URB for listening to PODxt Pro control endpoint */
+	struct urb *urb_listen;
+
+	/* Buffer for listening to PODxt Pro control endpoint */
+	unsigned char *buffer_listen;
+
+	/* Buffer for message to be processed */
+	unsigned char *buffer_message;
+
+	/* Length of message to be processed */
+	int message_length;
+
+	void (*process_message)(struct usb_line6 *);
+	void (*disconnect)(struct usb_line6 *line6);
+};
+
+extern char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1,
+				      int code2, int size);
+extern int line6_read_data(struct usb_line6 *line6, int address, void *data,
+			   size_t datalen);
+extern int line6_read_serial_number(struct usb_line6 *line6,
+				    u32 *serial_number);
+extern int line6_send_raw_message_async(struct usb_line6 *line6,
+					const char *buffer, int size);
+extern int line6_send_sysex_message(struct usb_line6 *line6,
+				    const char *buffer, int size);
+extern ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count);
+extern void line6_start_timer(struct timer_list *timer, unsigned long msecs,
+			      void (*function)(unsigned long),
+			      unsigned long data);
+extern int line6_version_request_async(struct usb_line6 *line6);
+extern int line6_write_data(struct usb_line6 *line6, int address, void *data,
+			    size_t datalen);
+
+int line6_probe(struct usb_interface *interface,
+		const struct usb_device_id *id,
+		const char *driver_name,
+		const struct line6_properties *properties,
+		int (*private_init)(struct usb_line6 *, const struct usb_device_id *id),
+		size_t data_size);
+
+void line6_disconnect(struct usb_interface *interface);
+
+#ifdef CONFIG_PM
+int line6_suspend(struct usb_interface *interface, pm_message_t message);
+int line6_resume(struct usb_interface *interface);
+#endif
+
+#endif
diff --git a/sound/usb/line6/midi.c b/sound/usb/line6/midi.c
new file mode 100644
index 000000000000..cebea9b7f769
--- /dev/null
+++ b/sound/usb/line6/midi.c
@@ -0,0 +1,292 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/export.h>
+#include <sound/core.h>
+#include <sound/rawmidi.h>
+
+#include "driver.h"
+#include "midi.h"
+
+#define line6_rawmidi_substream_midi(substream) \
+	((struct snd_line6_midi *)((substream)->rmidi->private_data))
+
+static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
+			   int length);
+
+/*
+	Pass data received via USB to MIDI.
+*/
+void line6_midi_receive(struct usb_line6 *line6, unsigned char *data,
+			int length)
+{
+	if (line6->line6midi->substream_receive)
+		snd_rawmidi_receive(line6->line6midi->substream_receive,
+				    data, length);
+}
+
+/*
+	Read data from MIDI buffer and transmit them via USB.
+*/
+static void line6_midi_transmit(struct snd_rawmidi_substream *substream)
+{
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+	struct snd_line6_midi *line6midi = line6->line6midi;
+	struct midi_buffer *mb = &line6midi->midibuf_out;
+	unsigned char chunk[LINE6_FALLBACK_MAXPACKETSIZE];
+	int req, done;
+
+	for (;;) {
+		req = min(line6_midibuf_bytes_free(mb), line6->max_packet_size);
+		done = snd_rawmidi_transmit_peek(substream, chunk, req);
+
+		if (done == 0)
+			break;
+
+		line6_midibuf_write(mb, chunk, done);
+		snd_rawmidi_transmit_ack(substream, done);
+	}
+
+	for (;;) {
+		done = line6_midibuf_read(mb, chunk,
+					  LINE6_FALLBACK_MAXPACKETSIZE);
+
+		if (done == 0)
+			break;
+
+		send_midi_async(line6, chunk, done);
+	}
+}
+
+/*
+	Notification of completion of MIDI transmission.
+*/
+static void midi_sent(struct urb *urb)
+{
+	unsigned long flags;
+	int status;
+	int num;
+	struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
+
+	status = urb->status;
+	kfree(urb->transfer_buffer);
+	usb_free_urb(urb);
+
+	if (status == -ESHUTDOWN)
+		return;
+
+	spin_lock_irqsave(&line6->line6midi->lock, flags);
+	num = --line6->line6midi->num_active_send_urbs;
+
+	if (num == 0) {
+		line6_midi_transmit(line6->line6midi->substream_transmit);
+		num = line6->line6midi->num_active_send_urbs;
+	}
+
+	if (num == 0)
+		wake_up(&line6->line6midi->send_wait);
+
+	spin_unlock_irqrestore(&line6->line6midi->lock, flags);
+}
+
+/*
+	Send an asynchronous MIDI message.
+	Assumes that line6->line6midi->lock is held
+	(i.e., this function is serialized).
+*/
+static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
+			   int length)
+{
+	struct urb *urb;
+	int retval;
+	unsigned char *transfer_buffer;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+
+	if (urb == NULL)
+		return -ENOMEM;
+
+	transfer_buffer = kmemdup(data, length, GFP_ATOMIC);
+
+	if (transfer_buffer == NULL) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	usb_fill_int_urb(urb, line6->usbdev,
+			 usb_sndbulkpipe(line6->usbdev,
+					 line6->properties->ep_ctrl_w),
+			 transfer_buffer, length, midi_sent, line6,
+			 line6->interval);
+	urb->actual_length = 0;
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+
+	if (retval < 0) {
+		dev_err(line6->ifcdev, "usb_submit_urb failed\n");
+		usb_free_urb(urb);
+		return retval;
+	}
+
+	++line6->line6midi->num_active_send_urbs;
+	return 0;
+}
+
+static int line6_midi_output_open(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static int line6_midi_output_close(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static void line6_midi_output_trigger(struct snd_rawmidi_substream *substream,
+				      int up)
+{
+	unsigned long flags;
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+
+	line6->line6midi->substream_transmit = substream;
+	spin_lock_irqsave(&line6->line6midi->lock, flags);
+
+	if (line6->line6midi->num_active_send_urbs == 0)
+		line6_midi_transmit(substream);
+
+	spin_unlock_irqrestore(&line6->line6midi->lock, flags);
+}
+
+static void line6_midi_output_drain(struct snd_rawmidi_substream *substream)
+{
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+	struct snd_line6_midi *midi = line6->line6midi;
+
+	wait_event_interruptible(midi->send_wait,
+				 midi->num_active_send_urbs == 0);
+}
+
+static int line6_midi_input_open(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static int line6_midi_input_close(struct snd_rawmidi_substream *substream)
+{
+	return 0;
+}
+
+static void line6_midi_input_trigger(struct snd_rawmidi_substream *substream,
+				     int up)
+{
+	struct usb_line6 *line6 =
+	    line6_rawmidi_substream_midi(substream)->line6;
+
+	if (up)
+		line6->line6midi->substream_receive = substream;
+	else
+		line6->line6midi->substream_receive = NULL;
+}
+
+static struct snd_rawmidi_ops line6_midi_output_ops = {
+	.open = line6_midi_output_open,
+	.close = line6_midi_output_close,
+	.trigger = line6_midi_output_trigger,
+	.drain = line6_midi_output_drain,
+};
+
+static struct snd_rawmidi_ops line6_midi_input_ops = {
+	.open = line6_midi_input_open,
+	.close = line6_midi_input_close,
+	.trigger = line6_midi_input_trigger,
+};
+
+/* Create a MIDI device */
+static int snd_line6_new_midi(struct usb_line6 *line6,
+			      struct snd_rawmidi **rmidi_ret)
+{
+	struct snd_rawmidi *rmidi;
+	int err;
+
+	err = snd_rawmidi_new(line6->card, "Line 6 MIDI", 0, 1, 1, rmidi_ret);
+	if (err < 0)
+		return err;
+
+	rmidi = *rmidi_ret;
+	strcpy(rmidi->id, line6->properties->id);
+	strcpy(rmidi->name, line6->properties->name);
+
+	rmidi->info_flags =
+	    SNDRV_RAWMIDI_INFO_OUTPUT |
+	    SNDRV_RAWMIDI_INFO_INPUT | SNDRV_RAWMIDI_INFO_DUPLEX;
+
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
+			    &line6_midi_output_ops);
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
+			    &line6_midi_input_ops);
+	return 0;
+}
+
+/* MIDI device destructor */
+static void snd_line6_midi_free(struct snd_rawmidi *rmidi)
+{
+	struct snd_line6_midi *line6midi = rmidi->private_data;
+
+	line6_midibuf_destroy(&line6midi->midibuf_in);
+	line6_midibuf_destroy(&line6midi->midibuf_out);
+	kfree(line6midi);
+}
+
+/*
+	Initialize the Line 6 MIDI subsystem.
+*/
+int line6_init_midi(struct usb_line6 *line6)
+{
+	int err;
+	struct snd_rawmidi *rmidi;
+	struct snd_line6_midi *line6midi;
+
+	if (!(line6->properties->capabilities & LINE6_CAP_CONTROL)) {
+		/* skip MIDI initialization and report success */
+		return 0;
+	}
+
+	err = snd_line6_new_midi(line6, &rmidi);
+	if (err < 0)
+		return err;
+
+	line6midi = kzalloc(sizeof(struct snd_line6_midi), GFP_KERNEL);
+	if (!line6midi)
+		return -ENOMEM;
+
+	rmidi->private_data = line6midi;
+	rmidi->private_free = snd_line6_midi_free;
+
+	init_waitqueue_head(&line6midi->send_wait);
+	spin_lock_init(&line6midi->lock);
+	line6midi->line6 = line6;
+
+	err = line6_midibuf_init(&line6midi->midibuf_in, MIDI_BUFFER_SIZE, 0);
+	if (err < 0)
+		return err;
+
+	err = line6_midibuf_init(&line6midi->midibuf_out, MIDI_BUFFER_SIZE, 1);
+	if (err < 0)
+		return err;
+
+	line6->line6midi = line6midi;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_init_midi);
diff --git a/sound/usb/line6/midi.h b/sound/usb/line6/midi.h
new file mode 100644
index 000000000000..cf82d69e2747
--- /dev/null
+++ b/sound/usb/line6/midi.h
@@ -0,0 +1,51 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#ifndef MIDI_H
+#define MIDI_H
+
+#include <sound/rawmidi.h>
+
+#include "midibuf.h"
+
+#define MIDI_BUFFER_SIZE 1024
+
+struct snd_line6_midi {
+	/* Pointer back to the Line 6 driver data structure */
+	struct usb_line6 *line6;
+
+	/* MIDI substream for receiving (or NULL if not active) */
+	struct snd_rawmidi_substream *substream_receive;
+
+	/* MIDI substream for transmitting (or NULL if not active) */
+	struct snd_rawmidi_substream *substream_transmit;
+
+	/* Number of currently active MIDI send URBs */
+	int num_active_send_urbs;
+
+	/* Spin lock to protect MIDI buffer handling */
+	spinlock_t lock;
+
+	/* Wait queue for MIDI transmission */
+	wait_queue_head_t send_wait;
+
+	/* Buffer for incoming MIDI stream */
+	struct midi_buffer midibuf_in;
+
+	/* Buffer for outgoing MIDI stream */
+	struct midi_buffer midibuf_out;
+};
+
+extern int line6_init_midi(struct usb_line6 *line6);
+extern void line6_midi_receive(struct usb_line6 *line6, unsigned char *data,
+			       int length);
+
+#endif
diff --git a/sound/usb/line6/midibuf.c b/sound/usb/line6/midibuf.c
new file mode 100644
index 000000000000..36a610ba342e
--- /dev/null
+++ b/sound/usb/line6/midibuf.c
@@ -0,0 +1,252 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/slab.h>
+
+#include "midibuf.h"
+
+static int midibuf_message_length(unsigned char code)
+{
+	int message_length;
+
+	if (code < 0x80)
+		message_length = -1;
+	else if (code < 0xf0) {
+		static const int length[] = { 3, 3, 3, 3, 2, 2, 3 };
+
+		message_length = length[(code >> 4) - 8];
+	} else {
+		/*
+		   Note that according to the MIDI specification 0xf2 is
+		   the "Song Position Pointer", but this is used by Line 6
+		   to send sysex messages to the host.
+		 */
+		static const int length[] = { -1, 2, -1, 2, -1, -1, 1, 1, 1, 1,
+			1, 1, 1, -1, 1, 1
+		};
+		message_length = length[code & 0x0f];
+	}
+
+	return message_length;
+}
+
+static int midibuf_is_empty(struct midi_buffer *this)
+{
+	return (this->pos_read == this->pos_write) && !this->full;
+}
+
+static int midibuf_is_full(struct midi_buffer *this)
+{
+	return this->full;
+}
+
+void line6_midibuf_reset(struct midi_buffer *this)
+{
+	this->pos_read = this->pos_write = this->full = 0;
+	this->command_prev = -1;
+}
+
+int line6_midibuf_init(struct midi_buffer *this, int size, int split)
+{
+	this->buf = kmalloc(size, GFP_KERNEL);
+
+	if (this->buf == NULL)
+		return -ENOMEM;
+
+	this->size = size;
+	this->split = split;
+	line6_midibuf_reset(this);
+	return 0;
+}
+
+int line6_midibuf_bytes_free(struct midi_buffer *this)
+{
+	return
+	    midibuf_is_full(this) ?
+	    0 :
+	    (this->pos_read - this->pos_write + this->size - 1) % this->size +
+	    1;
+}
+
+int line6_midibuf_bytes_used(struct midi_buffer *this)
+{
+	return
+	    midibuf_is_empty(this) ?
+	    0 :
+	    (this->pos_write - this->pos_read + this->size - 1) % this->size +
+	    1;
+}
+
+int line6_midibuf_write(struct midi_buffer *this, unsigned char *data,
+			int length)
+{
+	int bytes_free;
+	int length1, length2;
+	int skip_active_sense = 0;
+
+	if (midibuf_is_full(this) || (length <= 0))
+		return 0;
+
+	/* skip trailing active sense */
+	if (data[length - 1] == 0xfe) {
+		--length;
+		skip_active_sense = 1;
+	}
+
+	bytes_free = line6_midibuf_bytes_free(this);
+
+	if (length > bytes_free)
+		length = bytes_free;
+
+	if (length > 0) {
+		length1 = this->size - this->pos_write;
+
+		if (length < length1) {
+			/* no buffer wraparound */
+			memcpy(this->buf + this->pos_write, data, length);
+			this->pos_write += length;
+		} else {
+			/* buffer wraparound */
+			length2 = length - length1;
+			memcpy(this->buf + this->pos_write, data, length1);
+			memcpy(this->buf, data + length1, length2);
+			this->pos_write = length2;
+		}
+
+		if (this->pos_write == this->pos_read)
+			this->full = 1;
+	}
+
+	return length + skip_active_sense;
+}
+
+int line6_midibuf_read(struct midi_buffer *this, unsigned char *data,
+		       int length)
+{
+	int bytes_used;
+	int length1, length2;
+	int command;
+	int midi_length;
+	int repeat = 0;
+	int i;
+
+	/* we need to be able to store at least a 3 byte MIDI message */
+	if (length < 3)
+		return -EINVAL;
+
+	if (midibuf_is_empty(this))
+		return 0;
+
+	bytes_used = line6_midibuf_bytes_used(this);
+
+	if (length > bytes_used)
+		length = bytes_used;
+
+	length1 = this->size - this->pos_read;
+
+	/* check MIDI command length */
+	command = this->buf[this->pos_read];
+
+	if (command & 0x80) {
+		midi_length = midibuf_message_length(command);
+		this->command_prev = command;
+	} else {
+		if (this->command_prev > 0) {
+			int midi_length_prev =
+			    midibuf_message_length(this->command_prev);
+
+			if (midi_length_prev > 0) {
+				midi_length = midi_length_prev - 1;
+				repeat = 1;
+			} else
+				midi_length = -1;
+		} else
+			midi_length = -1;
+	}
+
+	if (midi_length < 0) {
+		/* search for end of message */
+		if (length < length1) {
+			/* no buffer wraparound */
+			for (i = 1; i < length; ++i)
+				if (this->buf[this->pos_read + i] & 0x80)
+					break;
+
+			midi_length = i;
+		} else {
+			/* buffer wraparound */
+			length2 = length - length1;
+
+			for (i = 1; i < length1; ++i)
+				if (this->buf[this->pos_read + i] & 0x80)
+					break;
+
+			if (i < length1)
+				midi_length = i;
+			else {
+				for (i = 0; i < length2; ++i)
+					if (this->buf[i] & 0x80)
+						break;
+
+				midi_length = length1 + i;
+			}
+		}
+
+		if (midi_length == length)
+			midi_length = -1;	/* end of message not found */
+	}
+
+	if (midi_length < 0) {
+		if (!this->split)
+			return 0;	/* command is not yet complete */
+	} else {
+		if (length < midi_length)
+			return 0;	/* command is not yet complete */
+
+		length = midi_length;
+	}
+
+	if (length < length1) {
+		/* no buffer wraparound */
+		memcpy(data + repeat, this->buf + this->pos_read, length);
+		this->pos_read += length;
+	} else {
+		/* buffer wraparound */
+		length2 = length - length1;
+		memcpy(data + repeat, this->buf + this->pos_read, length1);
+		memcpy(data + repeat + length1, this->buf, length2);
+		this->pos_read = length2;
+	}
+
+	if (repeat)
+		data[0] = this->command_prev;
+
+	this->full = 0;
+	return length + repeat;
+}
+
+int line6_midibuf_ignore(struct midi_buffer *this, int length)
+{
+	int bytes_used = line6_midibuf_bytes_used(this);
+
+	if (length > bytes_used)
+		length = bytes_used;
+
+	this->pos_read = (this->pos_read + length) % this->size;
+	this->full = 0;
+	return length;
+}
+
+void line6_midibuf_destroy(struct midi_buffer *this)
+{
+	kfree(this->buf);
+	this->buf = NULL;
+}
diff --git a/sound/usb/line6/midibuf.h b/sound/usb/line6/midibuf.h
new file mode 100644
index 000000000000..6ea21ffb6627
--- /dev/null
+++ b/sound/usb/line6/midibuf.h
@@ -0,0 +1,35 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#ifndef MIDIBUF_H
+#define MIDIBUF_H
+
+struct midi_buffer {
+	unsigned char *buf;
+	int size;
+	int split;
+	int pos_read, pos_write;
+	int full;
+	int command_prev;
+};
+
+extern int line6_midibuf_bytes_used(struct midi_buffer *mb);
+extern int line6_midibuf_bytes_free(struct midi_buffer *mb);
+extern void line6_midibuf_destroy(struct midi_buffer *mb);
+extern int line6_midibuf_ignore(struct midi_buffer *mb, int length);
+extern int line6_midibuf_init(struct midi_buffer *mb, int size, int split);
+extern int line6_midibuf_read(struct midi_buffer *mb, unsigned char *data,
+			      int length);
+extern void line6_midibuf_reset(struct midi_buffer *mb);
+extern int line6_midibuf_write(struct midi_buffer *mb, unsigned char *data,
+			       int length);
+
+#endif
diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c
new file mode 100644
index 000000000000..8461d6bf992f
--- /dev/null
+++ b/sound/usb/line6/pcm.c
@@ -0,0 +1,588 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "playback.h"
+
+/* impulse response volume controls */
+static int snd_line6_impulse_volume_info(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 255;
+	return 0;
+}
+
+static int snd_line6_impulse_volume_get(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = line6pcm->impulse_volume;
+	return 0;
+}
+
+static int snd_line6_impulse_volume_put(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	int value = ucontrol->value.integer.value[0];
+	int err;
+
+	if (line6pcm->impulse_volume == value)
+		return 0;
+
+	line6pcm->impulse_volume = value;
+	if (value > 0) {
+		err = line6_pcm_acquire(line6pcm, LINE6_STREAM_IMPULSE);
+		if (err < 0) {
+			line6pcm->impulse_volume = 0;
+			line6_pcm_release(line6pcm, LINE6_STREAM_IMPULSE);
+			return err;
+		}
+	} else {
+		line6_pcm_release(line6pcm, LINE6_STREAM_IMPULSE);
+	}
+	return 1;
+}
+
+/* impulse response period controls */
+static int snd_line6_impulse_period_info(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 2000;
+	return 0;
+}
+
+static int snd_line6_impulse_period_get(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = line6pcm->impulse_period;
+	return 0;
+}
+
+static int snd_line6_impulse_period_put(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	int value = ucontrol->value.integer.value[0];
+
+	if (line6pcm->impulse_period == value)
+		return 0;
+
+	line6pcm->impulse_period = value;
+	return 1;
+}
+
+/*
+	Unlink all currently active URBs.
+*/
+static void line6_unlink_audio_urbs(struct snd_line6_pcm *line6pcm,
+				    struct line6_pcm_stream *pcms)
+{
+	int i;
+
+	for (i = 0; i < LINE6_ISO_BUFFERS; i++) {
+		if (test_bit(i, &pcms->active_urbs)) {
+			if (!test_and_set_bit(i, &pcms->unlink_urbs))
+				usb_unlink_urb(pcms->urbs[i]);
+		}
+	}
+}
+
+/*
+	Wait until unlinking of all currently active URBs has been finished.
+*/
+static void line6_wait_clear_audio_urbs(struct snd_line6_pcm *line6pcm,
+					struct line6_pcm_stream *pcms)
+{
+	int timeout = HZ;
+	int i;
+	int alive;
+
+	do {
+		alive = 0;
+		for (i = 0; i < LINE6_ISO_BUFFERS; i++) {
+			if (test_bit(i, &pcms->active_urbs))
+				alive++;
+		}
+		if (!alive)
+			break;
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(1);
+	} while (--timeout > 0);
+	if (alive)
+		dev_err(line6pcm->line6->ifcdev,
+			"timeout: still %d active urbs..\n", alive);
+}
+
+static inline struct line6_pcm_stream *
+get_stream(struct snd_line6_pcm *line6pcm, int direction)
+{
+	return (direction == SNDRV_PCM_STREAM_PLAYBACK) ?
+		&line6pcm->out : &line6pcm->in;
+}
+
+/* allocate a buffer if not opened yet;
+ * call this in line6pcm.state_change mutex
+ */
+static int line6_buffer_acquire(struct snd_line6_pcm *line6pcm,
+				struct line6_pcm_stream *pstr, int type)
+{
+	/* Invoked multiple times in a row so allocate once only */
+	if (!test_and_set_bit(type, &pstr->opened) && !pstr->buffer) {
+		pstr->buffer = kmalloc(LINE6_ISO_BUFFERS * LINE6_ISO_PACKETS *
+				       line6pcm->max_packet_size, GFP_KERNEL);
+		if (!pstr->buffer)
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+/* free a buffer if all streams are closed;
+ * call this in line6pcm.state_change mutex
+ */
+static void line6_buffer_release(struct snd_line6_pcm *line6pcm,
+				 struct line6_pcm_stream *pstr, int type)
+{
+
+	clear_bit(type, &pstr->opened);
+	if (!pstr->opened) {
+		line6_wait_clear_audio_urbs(line6pcm, pstr);
+		kfree(pstr->buffer);
+		pstr->buffer = NULL;
+	}
+}
+
+/* start a PCM stream */
+static int line6_stream_start(struct snd_line6_pcm *line6pcm, int direction,
+			      int type)
+{
+	unsigned long flags;
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, direction);
+	int ret = 0;
+
+	spin_lock_irqsave(&pstr->lock, flags);
+	if (!test_and_set_bit(type, &pstr->running)) {
+		if (pstr->active_urbs || pstr->unlink_urbs) {
+			ret = -EBUSY;
+			goto error;
+		}
+
+		pstr->count = 0;
+		/* Submit all currently available URBs */
+		if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+			ret = line6_submit_audio_out_all_urbs(line6pcm);
+		else
+			ret = line6_submit_audio_in_all_urbs(line6pcm);
+	}
+ error:
+	if (ret < 0)
+		clear_bit(type, &pstr->running);
+	spin_unlock_irqrestore(&pstr->lock, flags);
+	return ret;
+}
+
+/* stop a PCM stream; this doesn't sync with the unlinked URBs */
+static void line6_stream_stop(struct snd_line6_pcm *line6pcm, int direction,
+			  int type)
+{
+	unsigned long flags;
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, direction);
+
+	spin_lock_irqsave(&pstr->lock, flags);
+	clear_bit(type, &pstr->running);
+	if (!pstr->running) {
+		line6_unlink_audio_urbs(line6pcm, pstr);
+		if (direction == SNDRV_PCM_STREAM_CAPTURE) {
+			line6pcm->prev_fbuf = NULL;
+			line6pcm->prev_fsize = 0;
+		}
+	}
+	spin_unlock_irqrestore(&pstr->lock, flags);
+}
+
+/* common PCM trigger callback */
+int snd_line6_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+	struct snd_pcm_substream *s;
+	int err;
+
+	clear_bit(LINE6_FLAG_PREPARED, &line6pcm->flags);
+
+	snd_pcm_group_for_each_entry(s, substream) {
+		if (s->pcm->card != substream->pcm->card)
+			continue;
+
+		switch (cmd) {
+		case SNDRV_PCM_TRIGGER_START:
+		case SNDRV_PCM_TRIGGER_RESUME:
+			err = line6_stream_start(line6pcm, s->stream,
+						 LINE6_STREAM_PCM);
+			if (err < 0)
+				return err;
+			break;
+
+		case SNDRV_PCM_TRIGGER_STOP:
+		case SNDRV_PCM_TRIGGER_SUSPEND:
+			line6_stream_stop(line6pcm, s->stream,
+					  LINE6_STREAM_PCM);
+			break;
+
+		case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+			if (s->stream != SNDRV_PCM_STREAM_PLAYBACK)
+				return -EINVAL;
+			set_bit(LINE6_FLAG_PAUSE_PLAYBACK, &line6pcm->flags);
+			break;
+
+		case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+			if (s->stream != SNDRV_PCM_STREAM_PLAYBACK)
+				return -EINVAL;
+			clear_bit(LINE6_FLAG_PAUSE_PLAYBACK, &line6pcm->flags);
+			break;
+
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+/* common PCM pointer callback */
+snd_pcm_uframes_t snd_line6_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, substream->stream);
+
+	return pstr->pos_done;
+}
+
+/* Acquire and start duplex streams:
+ * type is either LINE6_STREAM_IMPULSE or LINE6_STREAM_MONITOR
+ */
+int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int type)
+{
+	struct line6_pcm_stream *pstr;
+	int ret = 0, dir;
+
+	mutex_lock(&line6pcm->state_mutex);
+	for (dir = 0; dir < 2; dir++) {
+		pstr = get_stream(line6pcm, dir);
+		ret = line6_buffer_acquire(line6pcm, pstr, type);
+		if (ret < 0)
+			goto error;
+		if (!pstr->running)
+			line6_wait_clear_audio_urbs(line6pcm, pstr);
+	}
+	for (dir = 0; dir < 2; dir++) {
+		ret = line6_stream_start(line6pcm, dir, type);
+		if (ret < 0)
+			goto error;
+	}
+ error:
+	mutex_unlock(&line6pcm->state_mutex);
+	if (ret < 0)
+		line6_pcm_release(line6pcm, type);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(line6_pcm_acquire);
+
+/* Stop and release duplex streams */
+void line6_pcm_release(struct snd_line6_pcm *line6pcm, int type)
+{
+	struct line6_pcm_stream *pstr;
+	int dir;
+
+	mutex_lock(&line6pcm->state_mutex);
+	for (dir = 0; dir < 2; dir++)
+		line6_stream_stop(line6pcm, dir, type);
+	for (dir = 0; dir < 2; dir++) {
+		pstr = get_stream(line6pcm, dir);
+		line6_buffer_release(line6pcm, pstr, type);
+	}
+	mutex_unlock(&line6pcm->state_mutex);
+}
+EXPORT_SYMBOL_GPL(line6_pcm_release);
+
+/* common PCM hw_params callback */
+int snd_line6_hw_params(struct snd_pcm_substream *substream,
+			struct snd_pcm_hw_params *hw_params)
+{
+	int ret;
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, substream->stream);
+
+	mutex_lock(&line6pcm->state_mutex);
+	ret = line6_buffer_acquire(line6pcm, pstr, LINE6_STREAM_PCM);
+	if (ret < 0)
+		goto error;
+
+	ret = snd_pcm_lib_malloc_pages(substream,
+				       params_buffer_bytes(hw_params));
+	if (ret < 0) {
+		line6_buffer_release(line6pcm, pstr, LINE6_STREAM_PCM);
+		goto error;
+	}
+
+	pstr->period = params_period_bytes(hw_params);
+ error:
+	mutex_unlock(&line6pcm->state_mutex);
+	return ret;
+}
+
+/* common PCM hw_free callback */
+int snd_line6_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, substream->stream);
+
+	mutex_lock(&line6pcm->state_mutex);
+	line6_buffer_release(line6pcm, pstr, LINE6_STREAM_PCM);
+	mutex_unlock(&line6pcm->state_mutex);
+	return snd_pcm_lib_free_pages(substream);
+}
+
+
+/* control info callback */
+static int snd_line6_control_playback_info(struct snd_kcontrol *kcontrol,
+					   struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 256;
+	return 0;
+}
+
+/* control get callback */
+static int snd_line6_control_playback_get(struct snd_kcontrol *kcontrol,
+					  struct snd_ctl_elem_value *ucontrol)
+{
+	int i;
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+
+	for (i = 0; i < 2; i++)
+		ucontrol->value.integer.value[i] = line6pcm->volume_playback[i];
+
+	return 0;
+}
+
+/* control put callback */
+static int snd_line6_control_playback_put(struct snd_kcontrol *kcontrol,
+					  struct snd_ctl_elem_value *ucontrol)
+{
+	int i, changed = 0;
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+
+	for (i = 0; i < 2; i++)
+		if (line6pcm->volume_playback[i] !=
+		    ucontrol->value.integer.value[i]) {
+			line6pcm->volume_playback[i] =
+			    ucontrol->value.integer.value[i];
+			changed = 1;
+		}
+
+	return changed;
+}
+
+/* control definition */
+static struct snd_kcontrol_new line6_controls[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "PCM Playback Volume",
+		.info = snd_line6_control_playback_info,
+		.get = snd_line6_control_playback_get,
+		.put = snd_line6_control_playback_put
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Impulse Response Volume",
+		.info = snd_line6_impulse_volume_info,
+		.get = snd_line6_impulse_volume_get,
+		.put = snd_line6_impulse_volume_put
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Impulse Response Period",
+		.info = snd_line6_impulse_period_info,
+		.get = snd_line6_impulse_period_get,
+		.put = snd_line6_impulse_period_put
+	},
+};
+
+/*
+	Cleanup the PCM device.
+*/
+static void cleanup_urbs(struct line6_pcm_stream *pcms)
+{
+	int i;
+
+	for (i = 0; i < LINE6_ISO_BUFFERS; i++) {
+		if (pcms->urbs[i]) {
+			usb_kill_urb(pcms->urbs[i]);
+			usb_free_urb(pcms->urbs[i]);
+		}
+	}
+}
+
+static void line6_cleanup_pcm(struct snd_pcm *pcm)
+{
+	struct snd_line6_pcm *line6pcm = snd_pcm_chip(pcm);
+
+	cleanup_urbs(&line6pcm->out);
+	cleanup_urbs(&line6pcm->in);
+	kfree(line6pcm);
+}
+
+/* create a PCM device */
+static int snd_line6_new_pcm(struct usb_line6 *line6, struct snd_pcm **pcm_ret)
+{
+	struct snd_pcm *pcm;
+	int err;
+
+	err = snd_pcm_new(line6->card, (char *)line6->properties->name,
+			  0, 1, 1, pcm_ret);
+	if (err < 0)
+		return err;
+	pcm = *pcm_ret;
+	strcpy(pcm->name, line6->properties->name);
+
+	/* set operators */
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+			&snd_line6_playback_ops);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_line6_capture_ops);
+
+	/* pre-allocation of buffers */
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+					      snd_dma_continuous_data
+					      (GFP_KERNEL), 64 * 1024,
+					      128 * 1024);
+	return 0;
+}
+
+/*
+	Sync with PCM stream stops.
+*/
+void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm)
+{
+	line6_unlink_audio_urbs(line6pcm, &line6pcm->out);
+	line6_unlink_audio_urbs(line6pcm, &line6pcm->in);
+	line6_wait_clear_audio_urbs(line6pcm, &line6pcm->out);
+	line6_wait_clear_audio_urbs(line6pcm, &line6pcm->in);
+}
+
+/*
+	Create and register the PCM device and mixer entries.
+	Create URBs for playback and capture.
+*/
+int line6_init_pcm(struct usb_line6 *line6,
+		   struct line6_pcm_properties *properties)
+{
+	int i, err;
+	unsigned ep_read = line6->properties->ep_audio_r;
+	unsigned ep_write = line6->properties->ep_audio_w;
+	struct snd_pcm *pcm;
+	struct snd_line6_pcm *line6pcm;
+
+	if (!(line6->properties->capabilities & LINE6_CAP_PCM))
+		return 0;	/* skip PCM initialization and report success */
+
+	err = snd_line6_new_pcm(line6, &pcm);
+	if (err < 0)
+		return err;
+
+	line6pcm = kzalloc(sizeof(*line6pcm), GFP_KERNEL);
+	if (!line6pcm)
+		return -ENOMEM;
+
+	mutex_init(&line6pcm->state_mutex);
+	line6pcm->pcm = pcm;
+	line6pcm->properties = properties;
+	line6pcm->volume_playback[0] = line6pcm->volume_playback[1] = 255;
+	line6pcm->volume_monitor = 255;
+	line6pcm->line6 = line6;
+
+	/* Read and write buffers are sized identically, so choose minimum */
+	line6pcm->max_packet_size = min(
+			usb_maxpacket(line6->usbdev,
+				usb_rcvisocpipe(line6->usbdev, ep_read), 0),
+			usb_maxpacket(line6->usbdev,
+				usb_sndisocpipe(line6->usbdev, ep_write), 1));
+
+	spin_lock_init(&line6pcm->out.lock);
+	spin_lock_init(&line6pcm->in.lock);
+	line6pcm->impulse_period = LINE6_IMPULSE_DEFAULT_PERIOD;
+
+	line6->line6pcm = line6pcm;
+
+	pcm->private_data = line6pcm;
+	pcm->private_free = line6_cleanup_pcm;
+
+	err = line6_create_audio_out_urbs(line6pcm);
+	if (err < 0)
+		return err;
+
+	err = line6_create_audio_in_urbs(line6pcm);
+	if (err < 0)
+		return err;
+
+	/* mixer: */
+	for (i = 0; i < ARRAY_SIZE(line6_controls); i++) {
+		err = snd_ctl_add(line6->card,
+				  snd_ctl_new1(&line6_controls[i], line6pcm));
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_init_pcm);
+
+/* prepare pcm callback */
+int snd_line6_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+	struct line6_pcm_stream *pstr = get_stream(line6pcm, substream->stream);
+
+	mutex_lock(&line6pcm->state_mutex);
+	if (!pstr->running)
+		line6_wait_clear_audio_urbs(line6pcm, pstr);
+
+	if (!test_and_set_bit(LINE6_FLAG_PREPARED, &line6pcm->flags)) {
+		line6pcm->out.count = 0;
+		line6pcm->out.pos = 0;
+		line6pcm->out.pos_done = 0;
+		line6pcm->out.bytes = 0;
+		line6pcm->in.count = 0;
+		line6pcm->in.pos_done = 0;
+		line6pcm->in.bytes = 0;
+	}
+
+	mutex_unlock(&line6pcm->state_mutex);
+	return 0;
+}
diff --git a/sound/usb/line6/pcm.h b/sound/usb/line6/pcm.h
new file mode 100644
index 000000000000..508410adbd51
--- /dev/null
+++ b/sound/usb/line6/pcm.h
@@ -0,0 +1,197 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+/*
+	PCM interface to POD series devices.
+*/
+
+#ifndef PCM_H
+#define PCM_H
+
+#include <sound/pcm.h>
+
+#include "driver.h"
+
+/* number of URBs */
+#define LINE6_ISO_BUFFERS	2
+
+/*
+	number of USB frames per URB
+	The Line 6 Windows driver always transmits two frames per packet, but
+	the Linux driver performs significantly better (i.e., lower latency)
+	with only one frame per packet.
+*/
+#define LINE6_ISO_PACKETS	1
+
+/* in a "full speed" device (such as the PODxt Pro) this means 1ms */
+#define LINE6_ISO_INTERVAL	1
+
+#define LINE6_IMPULSE_DEFAULT_PERIOD 100
+
+/*
+	Get substream from Line 6 PCM data structure
+*/
+#define get_substream(line6pcm, stream)	\
+		(line6pcm->pcm->streams[stream].substream)
+
+/*
+	PCM mode bits.
+
+	There are several features of the Line 6 USB driver which require PCM
+	data to be exchanged with the device:
+	*) PCM playback and capture via ALSA
+	*) software monitoring (for devices without hardware monitoring)
+	*) optional impulse response measurement
+	However, from the device's point of view, there is just a single
+	capture and playback stream, which must be shared between these
+	subsystems. It is therefore necessary to maintain the state of the
+	subsystems with respect to PCM usage.
+
+	We define two bit flags, "opened" and "running", for each playback
+	or capture stream.  Both can contain the bit flag corresponding to
+	LINE6_STREAM_* type,
+	  LINE6_STREAM_PCM = ALSA PCM playback or capture
+	  LINE6_STREAM_MONITOR = software monitoring
+	  IMPULSE = optional impulse response measurement
+	The opened flag indicates whether the buffer is allocated while
+	the running flag indicates whether the stream is running.
+
+	For monitor or impulse operations, the driver needs to call
+	line6_pcm_acquire() or line6_pcm_release() with the appropriate
+	LINE6_STREAM_* flag.
+*/
+
+/* stream types */
+enum {
+	LINE6_STREAM_PCM,
+	LINE6_STREAM_MONITOR,
+	LINE6_STREAM_IMPULSE,
+};
+
+/* misc bit flags for PCM operation */
+enum {
+	LINE6_FLAG_PAUSE_PLAYBACK,
+	LINE6_FLAG_PREPARED,
+};
+
+struct line6_pcm_properties {
+	struct snd_pcm_hardware playback_hw, capture_hw;
+	struct snd_pcm_hw_constraint_ratdens rates;
+	int bytes_per_frame;
+};
+
+struct line6_pcm_stream {
+	/* allocated URBs */
+	struct urb *urbs[LINE6_ISO_BUFFERS];
+
+	/* Temporary buffer;
+	 * Since the packet size is not known in advance, this buffer is
+	 * large enough to store maximum size packets.
+	 */
+	unsigned char *buffer;
+
+	/* Free frame position in the buffer. */
+	snd_pcm_uframes_t pos;
+
+	/* Count processed bytes;
+	 * This is modulo period size (to determine when a period is finished).
+	 */
+	unsigned bytes;
+
+	/* Counter to create desired sample rate */
+	unsigned count;
+
+	/* period size in bytes */
+	unsigned period;
+
+	/* Processed frame position in the buffer;
+	 * The contents of the ring buffer have been consumed by the USB
+	 * subsystem (i.e., sent to the USB device) up to this position.
+	 */
+	snd_pcm_uframes_t pos_done;
+
+	/* Bit mask of active URBs */
+	unsigned long active_urbs;
+
+	/* Bit mask of URBs currently being unlinked */
+	unsigned long unlink_urbs;
+
+	/* Spin lock to protect updates of the buffer positions (not contents)
+	 */
+	spinlock_t lock;
+
+	/* Bit flags for operational stream types */
+	unsigned long opened;
+
+	/* Bit flags for running stream types */
+	unsigned long running;
+
+	int last_frame;
+};
+
+struct snd_line6_pcm {
+	/* Pointer back to the Line 6 driver data structure */
+	struct usb_line6 *line6;
+
+	/* Properties. */
+	struct line6_pcm_properties *properties;
+
+	/* ALSA pcm stream */
+	struct snd_pcm *pcm;
+
+	/* protection to state changes of in/out streams */
+	struct mutex state_mutex;
+
+	/* Capture and playback streams */
+	struct line6_pcm_stream in;
+	struct line6_pcm_stream out;
+
+	/* Previously captured frame (for software monitoring) */
+	unsigned char *prev_fbuf;
+
+	/* Size of previously captured frame (for software monitoring) */
+	int prev_fsize;
+
+	/* Maximum size of USB packet */
+	int max_packet_size;
+
+	/* PCM playback volume (left and right) */
+	int volume_playback[2];
+
+	/* PCM monitor volume */
+	int volume_monitor;
+
+	/* Volume of impulse response test signal (if zero, test is disabled) */
+	int impulse_volume;
+
+	/* Period of impulse response test signal */
+	int impulse_period;
+
+	/* Counter for impulse response test signal */
+	int impulse_count;
+
+	/* Several status bits (see LINE6_FLAG_*) */
+	unsigned long flags;
+};
+
+extern int line6_init_pcm(struct usb_line6 *line6,
+			  struct line6_pcm_properties *properties);
+extern int snd_line6_trigger(struct snd_pcm_substream *substream, int cmd);
+extern int snd_line6_prepare(struct snd_pcm_substream *substream);
+extern int snd_line6_hw_params(struct snd_pcm_substream *substream,
+			       struct snd_pcm_hw_params *hw_params);
+extern int snd_line6_hw_free(struct snd_pcm_substream *substream);
+extern snd_pcm_uframes_t snd_line6_pointer(struct snd_pcm_substream *substream);
+extern void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm);
+extern int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int type);
+extern void line6_pcm_release(struct snd_line6_pcm *line6pcm, int type);
+
+#endif
diff --git a/sound/usb/line6/playback.c b/sound/usb/line6/playback.c
new file mode 100644
index 000000000000..05dee690f487
--- /dev/null
+++ b/sound/usb/line6/playback.c
@@ -0,0 +1,429 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "pcm.h"
+#include "playback.h"
+
+/*
+	Software stereo volume control.
+*/
+static void change_volume(struct urb *urb_out, int volume[],
+			  int bytes_per_frame)
+{
+	int chn = 0;
+
+	if (volume[0] == 256 && volume[1] == 256)
+		return;		/* maximum volume - no change */
+
+	if (bytes_per_frame == 4) {
+		__le16 *p, *buf_end;
+
+		p = (__le16 *)urb_out->transfer_buffer;
+		buf_end = p + urb_out->transfer_buffer_length / sizeof(*p);
+
+		for (; p < buf_end; ++p) {
+			short pv = le16_to_cpu(*p);
+			int val = (pv * volume[chn & 1]) >> 8;
+			pv = clamp(val, 0x7fff, -0x8000);
+			*p = cpu_to_le16(pv);
+			++chn;
+		}
+	} else if (bytes_per_frame == 6) {
+		unsigned char *p, *buf_end;
+
+		p = (unsigned char *)urb_out->transfer_buffer;
+		buf_end = p + urb_out->transfer_buffer_length;
+
+		for (; p < buf_end; p += 3) {
+			int val;
+
+			val = p[0] + (p[1] << 8) + ((signed char)p[2] << 16);
+			val = (val * volume[chn & 1]) >> 8;
+			val = clamp(val, 0x7fffff, -0x800000);
+			p[0] = val;
+			p[1] = val >> 8;
+			p[2] = val >> 16;
+			++chn;
+		}
+	}
+}
+
+/*
+	Create signal for impulse response test.
+*/
+static void create_impulse_test_signal(struct snd_line6_pcm *line6pcm,
+				       struct urb *urb_out, int bytes_per_frame)
+{
+	int frames = urb_out->transfer_buffer_length / bytes_per_frame;
+
+	if (bytes_per_frame == 4) {
+		int i;
+		short *pi = (short *)line6pcm->prev_fbuf;
+		short *po = (short *)urb_out->transfer_buffer;
+
+		for (i = 0; i < frames; ++i) {
+			po[0] = pi[0];
+			po[1] = 0;
+			pi += 2;
+			po += 2;
+		}
+	} else if (bytes_per_frame == 6) {
+		int i, j;
+		unsigned char *pi = line6pcm->prev_fbuf;
+		unsigned char *po = urb_out->transfer_buffer;
+
+		for (i = 0; i < frames; ++i) {
+			for (j = 0; j < bytes_per_frame / 2; ++j)
+				po[j] = pi[j];
+
+			for (; j < bytes_per_frame; ++j)
+				po[j] = 0;
+
+			pi += bytes_per_frame;
+			po += bytes_per_frame;
+		}
+	}
+	if (--line6pcm->impulse_count <= 0) {
+		((unsigned char *)(urb_out->transfer_buffer))[bytes_per_frame -
+							      1] =
+		    line6pcm->impulse_volume;
+		line6pcm->impulse_count = line6pcm->impulse_period;
+	}
+}
+
+/*
+	Add signal to buffer for software monitoring.
+*/
+static void add_monitor_signal(struct urb *urb_out, unsigned char *signal,
+			       int volume, int bytes_per_frame)
+{
+	if (volume == 0)
+		return;		/* zero volume - no change */
+
+	if (bytes_per_frame == 4) {
+		__le16 *pi, *po, *buf_end;
+
+		pi = (__le16 *)signal;
+		po = (__le16 *)urb_out->transfer_buffer;
+		buf_end = po + urb_out->transfer_buffer_length / sizeof(*po);
+
+		for (; po < buf_end; ++pi, ++po) {
+			short pov = le16_to_cpu(*po);
+			short piv = le16_to_cpu(*pi);
+			int val = pov + ((piv * volume) >> 8);
+			pov = clamp(val, 0x7fff, -0x8000);
+			*po = cpu_to_le16(pov);
+		}
+	}
+
+	/*
+	   We don't need to handle devices with 6 bytes per frame here
+	   since they all support hardware monitoring.
+	 */
+}
+
+/*
+	Find a free URB, prepare audio data, and submit URB.
+	must be called in line6pcm->out.lock context
+*/
+static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
+{
+	int index;
+	int i, urb_size, urb_frames;
+	int ret;
+	const int bytes_per_frame = line6pcm->properties->bytes_per_frame;
+	const int frame_increment =
+		line6pcm->properties->rates.rats[0].num_min;
+	const int frame_factor =
+		line6pcm->properties->rates.rats[0].den *
+		(USB_INTERVALS_PER_SECOND / LINE6_ISO_INTERVAL);
+	struct urb *urb_out;
+
+	index =
+	    find_first_zero_bit(&line6pcm->out.active_urbs, LINE6_ISO_BUFFERS);
+
+	if (index < 0 || index >= LINE6_ISO_BUFFERS) {
+		dev_err(line6pcm->line6->ifcdev, "no free URB found\n");
+		return -EINVAL;
+	}
+
+	urb_out = line6pcm->out.urbs[index];
+	urb_size = 0;
+
+	for (i = 0; i < LINE6_ISO_PACKETS; ++i) {
+		/* compute frame size for given sampling rate */
+		int fsize = 0;
+		struct usb_iso_packet_descriptor *fout =
+		    &urb_out->iso_frame_desc[i];
+
+		fsize = line6pcm->prev_fsize;
+		if (fsize == 0) {
+			int n;
+
+			line6pcm->out.count += frame_increment;
+			n = line6pcm->out.count / frame_factor;
+			line6pcm->out.count -= n * frame_factor;
+			fsize = n * bytes_per_frame;
+		}
+
+		fout->offset = urb_size;
+		fout->length = fsize;
+		urb_size += fsize;
+	}
+
+	if (urb_size == 0) {
+		/* can't determine URB size */
+		dev_err(line6pcm->line6->ifcdev, "driver bug: urb_size = 0\n");
+		return -EINVAL;
+	}
+
+	urb_frames = urb_size / bytes_per_frame;
+	urb_out->transfer_buffer =
+	    line6pcm->out.buffer +
+	    index * LINE6_ISO_PACKETS * line6pcm->max_packet_size;
+	urb_out->transfer_buffer_length = urb_size;
+	urb_out->context = line6pcm;
+
+	if (test_bit(LINE6_STREAM_PCM, &line6pcm->out.running) &&
+	    !test_bit(LINE6_FLAG_PAUSE_PLAYBACK, &line6pcm->flags)) {
+		struct snd_pcm_runtime *runtime =
+		    get_substream(line6pcm, SNDRV_PCM_STREAM_PLAYBACK)->runtime;
+
+		if (line6pcm->out.pos + urb_frames > runtime->buffer_size) {
+			/*
+			   The transferred area goes over buffer boundary,
+			   copy the data to the temp buffer.
+			 */
+			int len;
+
+			len = runtime->buffer_size - line6pcm->out.pos;
+
+			if (len > 0) {
+				memcpy(urb_out->transfer_buffer,
+				       runtime->dma_area +
+				       line6pcm->out.pos * bytes_per_frame,
+				       len * bytes_per_frame);
+				memcpy(urb_out->transfer_buffer +
+				       len * bytes_per_frame, runtime->dma_area,
+				       (urb_frames - len) * bytes_per_frame);
+			} else
+				dev_err(line6pcm->line6->ifcdev, "driver bug: len = %d\n",
+					len);
+		} else {
+			memcpy(urb_out->transfer_buffer,
+			       runtime->dma_area +
+			       line6pcm->out.pos * bytes_per_frame,
+			       urb_out->transfer_buffer_length);
+		}
+
+		line6pcm->out.pos += urb_frames;
+		if (line6pcm->out.pos >= runtime->buffer_size)
+			line6pcm->out.pos -= runtime->buffer_size;
+
+		change_volume(urb_out, line6pcm->volume_playback,
+			      bytes_per_frame);
+	} else {
+		memset(urb_out->transfer_buffer, 0,
+		       urb_out->transfer_buffer_length);
+	}
+
+	spin_lock_nested(&line6pcm->in.lock, SINGLE_DEPTH_NESTING);
+	if (line6pcm->prev_fbuf) {
+		if (test_bit(LINE6_STREAM_IMPULSE, &line6pcm->out.running)) {
+			create_impulse_test_signal(line6pcm, urb_out,
+						   bytes_per_frame);
+			if (test_bit(LINE6_STREAM_PCM, &line6pcm->in.running)) {
+				line6_capture_copy(line6pcm,
+						   urb_out->transfer_buffer,
+						   urb_out->
+						   transfer_buffer_length);
+				line6_capture_check_period(line6pcm,
+					urb_out->transfer_buffer_length);
+			}
+		} else {
+			if (!(line6pcm->line6->properties->capabilities & LINE6_CAP_HWMON)
+			    && line6pcm->out.running && line6pcm->in.running)
+				add_monitor_signal(urb_out, line6pcm->prev_fbuf,
+						   line6pcm->volume_monitor,
+						   bytes_per_frame);
+		}
+		line6pcm->prev_fbuf = NULL;
+		line6pcm->prev_fsize = 0;
+	}
+	spin_unlock(&line6pcm->in.lock);
+
+	ret = usb_submit_urb(urb_out, GFP_ATOMIC);
+
+	if (ret == 0)
+		set_bit(index, &line6pcm->out.active_urbs);
+	else
+		dev_err(line6pcm->line6->ifcdev,
+			"URB out #%d submission failed (%d)\n", index, ret);
+
+	return 0;
+}
+
+/*
+	Submit all currently available playback URBs.
+	must be called in line6pcm->out.lock context
+ */
+int line6_submit_audio_out_all_urbs(struct snd_line6_pcm *line6pcm)
+{
+	int ret = 0, i;
+
+	for (i = 0; i < LINE6_ISO_BUFFERS; ++i) {
+		ret = submit_audio_out_urb(line6pcm);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+/*
+	Callback for completed playback URB.
+*/
+static void audio_out_callback(struct urb *urb)
+{
+	int i, index, length = 0, shutdown = 0;
+	unsigned long flags;
+	struct snd_line6_pcm *line6pcm = (struct snd_line6_pcm *)urb->context;
+	struct snd_pcm_substream *substream =
+	    get_substream(line6pcm, SNDRV_PCM_STREAM_PLAYBACK);
+
+#if USE_CLEAR_BUFFER_WORKAROUND
+	memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
+#endif
+
+	line6pcm->out.last_frame = urb->start_frame;
+
+	/* find index of URB */
+	for (index = 0; index < LINE6_ISO_BUFFERS; index++)
+		if (urb == line6pcm->out.urbs[index])
+			break;
+
+	if (index >= LINE6_ISO_BUFFERS)
+		return;		/* URB has been unlinked asynchronously */
+
+	for (i = 0; i < LINE6_ISO_PACKETS; i++)
+		length += urb->iso_frame_desc[i].length;
+
+	spin_lock_irqsave(&line6pcm->out.lock, flags);
+
+	if (test_bit(LINE6_STREAM_PCM, &line6pcm->out.running)) {
+		struct snd_pcm_runtime *runtime = substream->runtime;
+
+		line6pcm->out.pos_done +=
+		    length / line6pcm->properties->bytes_per_frame;
+
+		if (line6pcm->out.pos_done >= runtime->buffer_size)
+			line6pcm->out.pos_done -= runtime->buffer_size;
+	}
+
+	clear_bit(index, &line6pcm->out.active_urbs);
+
+	for (i = 0; i < LINE6_ISO_PACKETS; i++)
+		if (urb->iso_frame_desc[i].status == -EXDEV) {
+			shutdown = 1;
+			break;
+		}
+
+	if (test_and_clear_bit(index, &line6pcm->out.unlink_urbs))
+		shutdown = 1;
+
+	if (!shutdown) {
+		submit_audio_out_urb(line6pcm);
+
+		if (test_bit(LINE6_STREAM_PCM, &line6pcm->out.running)) {
+			line6pcm->out.bytes += length;
+			if (line6pcm->out.bytes >= line6pcm->out.period) {
+				line6pcm->out.bytes %= line6pcm->out.period;
+				spin_unlock(&line6pcm->out.lock);
+				snd_pcm_period_elapsed(substream);
+				spin_lock(&line6pcm->out.lock);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&line6pcm->out.lock, flags);
+}
+
+/* open playback callback */
+static int snd_line6_playback_open(struct snd_pcm_substream *substream)
+{
+	int err;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+
+	err = snd_pcm_hw_constraint_ratdens(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
+					    &line6pcm->properties->rates);
+	if (err < 0)
+		return err;
+
+	runtime->hw = line6pcm->properties->playback_hw;
+	return 0;
+}
+
+/* close playback callback */
+static int snd_line6_playback_close(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+/* playback operators */
+struct snd_pcm_ops snd_line6_playback_ops = {
+	.open = snd_line6_playback_open,
+	.close = snd_line6_playback_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = snd_line6_hw_params,
+	.hw_free = snd_line6_hw_free,
+	.prepare = snd_line6_prepare,
+	.trigger = snd_line6_trigger,
+	.pointer = snd_line6_pointer,
+};
+
+int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm)
+{
+	struct usb_line6 *line6 = line6pcm->line6;
+	int i;
+
+	/* create audio URBs and fill in constant values: */
+	for (i = 0; i < LINE6_ISO_BUFFERS; ++i) {
+		struct urb *urb;
+
+		/* URB for audio out: */
+		urb = line6pcm->out.urbs[i] =
+		    usb_alloc_urb(LINE6_ISO_PACKETS, GFP_KERNEL);
+
+		if (urb == NULL)
+			return -ENOMEM;
+
+		urb->dev = line6->usbdev;
+		urb->pipe =
+		    usb_sndisocpipe(line6->usbdev,
+				    line6->properties->ep_audio_w &
+				    USB_ENDPOINT_NUMBER_MASK);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->start_frame = -1;
+		urb->number_of_packets = LINE6_ISO_PACKETS;
+		urb->interval = LINE6_ISO_INTERVAL;
+		urb->error_count = 0;
+		urb->complete = audio_out_callback;
+	}
+
+	return 0;
+}
diff --git a/sound/usb/line6/playback.h b/sound/usb/line6/playback.h
new file mode 100644
index 000000000000..51fce29e8726
--- /dev/null
+++ b/sound/usb/line6/playback.h
@@ -0,0 +1,35 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#ifndef PLAYBACK_H
+#define PLAYBACK_H
+
+#include <sound/pcm.h>
+
+#include "driver.h"
+
+/*
+ * When the TonePort is used with jack in full duplex mode and the outputs are
+ * not connected, the software monitor produces an ugly noise since everything
+ * written to the output buffer (i.e., the input signal) will be repeated in
+ * the next period (sounds like a delay effect). As a workaround, the output
+ * buffer is cleared after the data have been read, but there must be a better
+ * solution. Until one is found, this workaround can be used to fix the
+ * problem.
+ */
+#define USE_CLEAR_BUFFER_WORKAROUND 1
+
+extern struct snd_pcm_ops snd_line6_playback_ops;
+
+extern int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm);
+extern int line6_submit_audio_out_all_urbs(struct snd_line6_pcm *line6pcm);
+
+#endif
diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c
new file mode 100644
index 000000000000..daf81d169a42
--- /dev/null
+++ b/sound/usb/line6/pod.c
@@ -0,0 +1,584 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "playback.h"
+
+/*
+	Locate name in binary program dump
+*/
+#define	POD_NAME_OFFSET 0
+#define	POD_NAME_LENGTH 16
+
+/*
+	Other constants
+*/
+#define POD_CONTROL_SIZE 0x80
+#define POD_BUFSIZE_DUMPREQ 7
+#define POD_STARTUP_DELAY 1000
+
+/*
+	Stages of POD startup procedure
+*/
+enum {
+	POD_STARTUP_INIT = 1,
+	POD_STARTUP_VERSIONREQ,
+	POD_STARTUP_WORKQUEUE,
+	POD_STARTUP_SETUP,
+	POD_STARTUP_LAST = POD_STARTUP_SETUP - 1
+};
+
+enum {
+	LINE6_BASSPODXT,
+	LINE6_BASSPODXTLIVE,
+	LINE6_BASSPODXTPRO,
+	LINE6_POCKETPOD,
+	LINE6_PODXT,
+	LINE6_PODXTLIVE_POD,
+	LINE6_PODXTPRO,
+};
+
+struct usb_line6_pod {
+	/* Generic Line 6 USB data */
+	struct usb_line6 line6;
+
+	/* Instrument monitor level */
+	int monitor_level;
+
+	/* Timer for device initialization */
+	struct timer_list startup_timer;
+
+	/* Work handler for device initialization */
+	struct work_struct startup_work;
+
+	/* Current progress in startup procedure */
+	int startup_progress;
+
+	/* Serial number of device */
+	u32 serial_number;
+
+	/* Firmware version (x 100) */
+	int firmware_version;
+
+	/* Device ID */
+	int device_id;
+};
+
+#define POD_SYSEX_CODE 3
+#define POD_BYTES_PER_FRAME 6	/* 24bit audio (stereo) */
+
+/* *INDENT-OFF* */
+
+enum {
+	POD_SYSEX_SAVE      = 0x24,
+	POD_SYSEX_SYSTEM    = 0x56,
+	POD_SYSEX_SYSTEMREQ = 0x57,
+	/* POD_SYSEX_UPDATE    = 0x6c, */  /* software update! */
+	POD_SYSEX_STORE     = 0x71,
+	POD_SYSEX_FINISH    = 0x72,
+	POD_SYSEX_DUMPMEM   = 0x73,
+	POD_SYSEX_DUMP      = 0x74,
+	POD_SYSEX_DUMPREQ   = 0x75
+
+	/* dumps entire internal memory of PODxt Pro */
+	/* POD_SYSEX_DUMPMEM2  = 0x76 */
+};
+
+enum {
+	POD_MONITOR_LEVEL  = 0x04,
+	POD_SYSTEM_INVALID = 0x10000
+};
+
+/* *INDENT-ON* */
+
+enum {
+	POD_DUMP_MEMORY = 2
+};
+
+enum {
+	POD_BUSY_READ,
+	POD_BUSY_WRITE,
+	POD_CHANNEL_DIRTY,
+	POD_SAVE_PRESSED,
+	POD_BUSY_MIDISEND
+};
+
+static struct snd_ratden pod_ratden = {
+	.num_min = 78125,
+	.num_max = 78125,
+	.num_step = 1,
+	.den = 2
+};
+
+static struct line6_pcm_properties pod_pcm_properties = {
+	.playback_hw = {
+				  .info = (SNDRV_PCM_INFO_MMAP |
+					   SNDRV_PCM_INFO_INTERLEAVED |
+					   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					   SNDRV_PCM_INFO_MMAP_VALID |
+					   SNDRV_PCM_INFO_PAUSE |
+					   SNDRV_PCM_INFO_SYNC_START),
+				  .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				  .rates = SNDRV_PCM_RATE_KNOT,
+				  .rate_min = 39062,
+				  .rate_max = 39063,
+				  .channels_min = 2,
+				  .channels_max = 2,
+				  .buffer_bytes_max = 60000,
+				  .period_bytes_min = 64,
+				  .period_bytes_max = 8192,
+				  .periods_min = 1,
+				  .periods_max = 1024},
+	.capture_hw = {
+				 .info = (SNDRV_PCM_INFO_MMAP |
+					  SNDRV_PCM_INFO_INTERLEAVED |
+					  SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					  SNDRV_PCM_INFO_MMAP_VALID |
+					  SNDRV_PCM_INFO_SYNC_START),
+				 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				 .rates = SNDRV_PCM_RATE_KNOT,
+				 .rate_min = 39062,
+				 .rate_max = 39063,
+				 .channels_min = 2,
+				 .channels_max = 2,
+				 .buffer_bytes_max = 60000,
+				 .period_bytes_min = 64,
+				 .period_bytes_max = 8192,
+				 .periods_min = 1,
+				 .periods_max = 1024},
+	.rates = {
+			    .nrats = 1,
+			    .rats = &pod_ratden},
+	.bytes_per_frame = POD_BYTES_PER_FRAME
+};
+
+static const char pod_version_header[] = {
+	0xf2, 0x7e, 0x7f, 0x06, 0x02
+};
+
+/* forward declarations: */
+static void pod_startup2(unsigned long data);
+static void pod_startup3(struct usb_line6_pod *pod);
+
+static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
+				    int size)
+{
+	return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code,
+					size);
+}
+
+/*
+	Process a completely received message.
+*/
+static void line6_pod_process_message(struct usb_line6 *line6)
+{
+	struct usb_line6_pod *pod = (struct usb_line6_pod *) line6;
+	const unsigned char *buf = pod->line6.buffer_message;
+
+	if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) {
+		pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15];
+		pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) |
+				 (int) buf[10];
+		pod_startup3(pod);
+		return;
+	}
+
+	/* Only look for sysex messages from this device */
+	if (buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE) &&
+	    buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_UNKNOWN)) {
+		return;
+	}
+	if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) != 0)
+		return;
+
+	if (buf[5] == POD_SYSEX_SYSTEM && buf[6] == POD_MONITOR_LEVEL) {
+		short value = ((int)buf[7] << 12) | ((int)buf[8] << 8) |
+			      ((int)buf[9] << 4) | (int)buf[10];
+		pod->monitor_level = value;
+	}
+}
+
+/*
+	Send system parameter (from integer).
+*/
+static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
+				    int code)
+{
+	char *sysex;
+	static const int size = 5;
+
+	sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size);
+	if (!sysex)
+		return -ENOMEM;
+	sysex[SYSEX_DATA_OFS] = code;
+	sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 4] = (value) & 0x0f;
+	line6_send_sysex_message(&pod->line6, sysex, size);
+	kfree(sysex);
+	return 0;
+}
+
+/*
+	"read" request on "serial_number" special file.
+*/
+static ssize_t serial_number_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *interface = to_usb_interface(dev);
+	struct usb_line6_pod *pod = usb_get_intfdata(interface);
+
+	return sprintf(buf, "%u\n", pod->serial_number);
+}
+
+/*
+	"read" request on "firmware_version" special file.
+*/
+static ssize_t firmware_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *interface = to_usb_interface(dev);
+	struct usb_line6_pod *pod = usb_get_intfdata(interface);
+
+	return sprintf(buf, "%d.%02d\n", pod->firmware_version / 100,
+		       pod->firmware_version % 100);
+}
+
+/*
+	"read" request on "device_id" special file.
+*/
+static ssize_t device_id_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *interface = to_usb_interface(dev);
+	struct usb_line6_pod *pod = usb_get_intfdata(interface);
+
+	return sprintf(buf, "%d\n", pod->device_id);
+}
+
+/*
+	POD startup procedure.
+	This is a sequence of functions with special requirements (e.g., must
+	not run immediately after initialization, must not run in interrupt
+	context). After the last one has finished, the device is ready to use.
+*/
+
+static void pod_startup1(struct usb_line6_pod *pod)
+{
+	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_INIT);
+
+	/* delay startup procedure: */
+	line6_start_timer(&pod->startup_timer, POD_STARTUP_DELAY, pod_startup2,
+			  (unsigned long)pod);
+}
+
+static void pod_startup2(unsigned long data)
+{
+	struct usb_line6_pod *pod = (struct usb_line6_pod *)data;
+	struct usb_line6 *line6 = &pod->line6;
+
+	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_VERSIONREQ);
+
+	/* request firmware version: */
+	line6_version_request_async(line6);
+}
+
+static void pod_startup3(struct usb_line6_pod *pod)
+{
+	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_WORKQUEUE);
+
+	/* schedule work for global work queue: */
+	schedule_work(&pod->startup_work);
+}
+
+static void pod_startup4(struct work_struct *work)
+{
+	struct usb_line6_pod *pod =
+	    container_of(work, struct usb_line6_pod, startup_work);
+	struct usb_line6 *line6 = &pod->line6;
+
+	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_SETUP);
+
+	/* serial number: */
+	line6_read_serial_number(&pod->line6, &pod->serial_number);
+
+	/* ALSA audio interface: */
+	snd_card_register(line6->card);
+}
+
+/* POD special files: */
+static DEVICE_ATTR_RO(device_id);
+static DEVICE_ATTR_RO(firmware_version);
+static DEVICE_ATTR_RO(serial_number);
+
+static struct attribute *pod_dev_attrs[] = {
+	&dev_attr_device_id.attr,
+	&dev_attr_firmware_version.attr,
+	&dev_attr_serial_number.attr,
+	NULL
+};
+
+static const struct attribute_group pod_dev_attr_group = {
+	.name = "pod",
+	.attrs = pod_dev_attrs,
+};
+
+/* control info callback */
+static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 65535;
+	return 0;
+}
+
+/* control get callback */
+static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
+
+	ucontrol->value.integer.value[0] = pod->monitor_level;
+	return 0;
+}
+
+/* control put callback */
+static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
+
+	if (ucontrol->value.integer.value[0] == pod->monitor_level)
+		return 0;
+
+	pod->monitor_level = ucontrol->value.integer.value[0];
+	pod_set_system_param_int(pod, ucontrol->value.integer.value[0],
+				 POD_MONITOR_LEVEL);
+	return 1;
+}
+
+/* control definition */
+static struct snd_kcontrol_new pod_control_monitor = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Monitor Playback Volume",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_pod_control_monitor_info,
+	.get = snd_pod_control_monitor_get,
+	.put = snd_pod_control_monitor_put
+};
+
+/*
+	POD device disconnected.
+*/
+static void line6_pod_disconnect(struct usb_line6 *line6)
+{
+	struct usb_line6_pod *pod = (struct usb_line6_pod *)line6;
+
+	del_timer_sync(&pod->startup_timer);
+	cancel_work_sync(&pod->startup_work);
+}
+
+/*
+	 Try to init POD device.
+*/
+static int pod_init(struct usb_line6 *line6,
+		    const struct usb_device_id *id)
+{
+	int err;
+	struct usb_line6_pod *pod = (struct usb_line6_pod *) line6;
+
+	line6->process_message = line6_pod_process_message;
+	line6->disconnect = line6_pod_disconnect;
+
+	init_timer(&pod->startup_timer);
+	INIT_WORK(&pod->startup_work, pod_startup4);
+
+	/* create sysfs entries: */
+	err = snd_card_add_dev_attr(line6->card, &pod_dev_attr_group);
+	if (err < 0)
+		return err;
+
+	/* initialize MIDI subsystem: */
+	err = line6_init_midi(line6);
+	if (err < 0)
+		return err;
+
+	/* initialize PCM subsystem: */
+	err = line6_init_pcm(line6, &pod_pcm_properties);
+	if (err < 0)
+		return err;
+
+	/* register monitor control: */
+	err = snd_ctl_add(line6->card,
+			  snd_ctl_new1(&pod_control_monitor, line6->line6pcm));
+	if (err < 0)
+		return err;
+
+	/*
+	   When the sound card is registered at this point, the PODxt Live
+	   displays "Invalid Code Error 07", so we do it later in the event
+	   handler.
+	 */
+
+	if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
+		pod->monitor_level = POD_SYSTEM_INVALID;
+
+		/* initiate startup procedure: */
+		pod_startup1(pod);
+	}
+
+	return 0;
+}
+
+#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
+#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
+
+/* table of devices that work with this driver */
+static const struct usb_device_id pod_id_table[] = {
+	{ LINE6_DEVICE(0x4250),    .driver_info = LINE6_BASSPODXT },
+	{ LINE6_DEVICE(0x4642),    .driver_info = LINE6_BASSPODXTLIVE },
+	{ LINE6_DEVICE(0x4252),    .driver_info = LINE6_BASSPODXTPRO },
+	{ LINE6_IF_NUM(0x5051, 1), .driver_info = LINE6_POCKETPOD },
+	{ LINE6_DEVICE(0x5044),    .driver_info = LINE6_PODXT },
+	{ LINE6_IF_NUM(0x4650, 0), .driver_info = LINE6_PODXTLIVE_POD },
+	{ LINE6_DEVICE(0x5050),    .driver_info = LINE6_PODXTPRO },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, pod_id_table);
+
+static const struct line6_properties pod_properties_table[] = {
+	[LINE6_BASSPODXT] = {
+		.id = "BassPODxt",
+		.name = "BassPODxt",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_BASSPODXTLIVE] = {
+		.id = "BassPODxtLive",
+		.name = "BassPODxt Live",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_BASSPODXTPRO] = {
+		.id = "BassPODxtPro",
+		.name = "BassPODxt Pro",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_POCKETPOD] = {
+		.id = "PocketPOD",
+		.name = "Pocket POD",
+		.capabilities	= LINE6_CAP_CONTROL,
+		.altsetting = 0,
+		.ep_ctrl_r = 0x82,
+		.ep_ctrl_w = 0x02,
+		/* no audio channel */
+	},
+	[LINE6_PODXT] = {
+		.id = "PODxt",
+		.name = "PODxt",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODXTLIVE_POD] = {
+		.id = "PODxtLive",
+		.name = "PODxt Live",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODXTPRO] = {
+		.id = "PODxtPro",
+		.name = "PODxt Pro",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+};
+
+/*
+	Probe USB device.
+*/
+static int pod_probe(struct usb_interface *interface,
+		     const struct usb_device_id *id)
+{
+	return line6_probe(interface, id, "Line6-POD",
+			   &pod_properties_table[id->driver_info],
+			   pod_init, sizeof(struct usb_line6_pod));
+}
+
+static struct usb_driver pod_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = pod_probe,
+	.disconnect = line6_disconnect,
+#ifdef CONFIG_PM
+	.suspend = line6_suspend,
+	.resume = line6_resume,
+	.reset_resume = line6_resume,
+#endif
+	.id_table = pod_id_table,
+};
+
+module_usb_driver(pod_driver);
+
+MODULE_DESCRIPTION("Line 6 POD USB driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c
new file mode 100644
index 000000000000..63dcaef41ac3
--- /dev/null
+++ b/sound/usb/line6/podhd.c
@@ -0,0 +1,192 @@
+/*
+ * Line 6 Pod HD
+ *
+ * Copyright (C) 2011 Stefan Hajnoczi <stefanha@gmail.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "driver.h"
+#include "pcm.h"
+
+enum {
+	LINE6_PODHD300,
+	LINE6_PODHD400,
+	LINE6_PODHD500_0,
+	LINE6_PODHD500_1,
+};
+
+#define PODHD_BYTES_PER_FRAME 6	/* 24bit audio (stereo) */
+
+static struct snd_ratden podhd_ratden = {
+	.num_min = 48000,
+	.num_max = 48000,
+	.num_step = 1,
+	.den = 1,
+};
+
+static struct line6_pcm_properties podhd_pcm_properties = {
+	.playback_hw = {
+				  .info = (SNDRV_PCM_INFO_MMAP |
+					   SNDRV_PCM_INFO_INTERLEAVED |
+					   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					   SNDRV_PCM_INFO_MMAP_VALID |
+					   SNDRV_PCM_INFO_PAUSE |
+					   SNDRV_PCM_INFO_SYNC_START),
+				  .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				  .rates = SNDRV_PCM_RATE_48000,
+				  .rate_min = 48000,
+				  .rate_max = 48000,
+				  .channels_min = 2,
+				  .channels_max = 2,
+				  .buffer_bytes_max = 60000,
+				  .period_bytes_min = 64,
+				  .period_bytes_max = 8192,
+				  .periods_min = 1,
+				  .periods_max = 1024},
+	.capture_hw = {
+				 .info = (SNDRV_PCM_INFO_MMAP |
+					  SNDRV_PCM_INFO_INTERLEAVED |
+					  SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					  SNDRV_PCM_INFO_MMAP_VALID |
+					  SNDRV_PCM_INFO_SYNC_START),
+				 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				 .rates = SNDRV_PCM_RATE_48000,
+				 .rate_min = 48000,
+				 .rate_max = 48000,
+				 .channels_min = 2,
+				 .channels_max = 2,
+				 .buffer_bytes_max = 60000,
+				 .period_bytes_min = 64,
+				 .period_bytes_max = 8192,
+				 .periods_min = 1,
+				 .periods_max = 1024},
+	.rates = {
+			    .nrats = 1,
+			    .rats = &podhd_ratden},
+	.bytes_per_frame = PODHD_BYTES_PER_FRAME
+};
+
+/*
+	Try to init POD HD device.
+*/
+static int podhd_init(struct usb_line6 *line6,
+		      const struct usb_device_id *id)
+{
+	int err;
+
+	/* initialize MIDI subsystem: */
+	err = line6_init_midi(line6);
+	if (err < 0)
+		return err;
+
+	/* initialize PCM subsystem: */
+	err = line6_init_pcm(line6, &podhd_pcm_properties);
+	if (err < 0)
+		return err;
+
+	/* register USB audio system: */
+	return snd_card_register(line6->card);
+}
+
+#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
+#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
+
+/* table of devices that work with this driver */
+static const struct usb_device_id podhd_id_table[] = {
+	{ LINE6_DEVICE(0x5057),    .driver_info = LINE6_PODHD300 },
+	{ LINE6_DEVICE(0x5058),    .driver_info = LINE6_PODHD400 },
+	{ LINE6_IF_NUM(0x414D, 0), .driver_info = LINE6_PODHD500_0 },
+	{ LINE6_IF_NUM(0x414D, 1), .driver_info = LINE6_PODHD500_1 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, podhd_id_table);
+
+static const struct line6_properties podhd_properties_table[] = {
+	[LINE6_PODHD300] = {
+		.id = "PODHD300",
+		.name = "POD HD300",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODHD400] = {
+		.id = "PODHD400",
+		.name = "POD HD400",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 5,
+		.ep_ctrl_r = 0x84,
+		.ep_ctrl_w = 0x03,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODHD500_0] = {
+		.id = "PODHD500",
+		.name = "POD HD500",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x81,
+		.ep_ctrl_w = 0x01,
+		.ep_audio_r = 0x86,
+		.ep_audio_w = 0x02,
+	},
+	[LINE6_PODHD500_1] = {
+		.id = "PODHD500",
+		.name = "POD HD500",
+		.capabilities	= LINE6_CAP_CONTROL
+				| LINE6_CAP_PCM
+				| LINE6_CAP_HWMON,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x81,
+		.ep_ctrl_w = 0x01,
+		.ep_audio_r = 0x86,
+		.ep_audio_w = 0x02,
+	},
+};
+
+/*
+	Probe USB device.
+*/
+static int podhd_probe(struct usb_interface *interface,
+		       const struct usb_device_id *id)
+{
+	return line6_probe(interface, id, "Line6-PODHD",
+			   &podhd_properties_table[id->driver_info],
+			   podhd_init, sizeof(struct usb_line6));
+}
+
+static struct usb_driver podhd_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = podhd_probe,
+	.disconnect = line6_disconnect,
+#ifdef CONFIG_PM
+	.suspend = line6_suspend,
+	.resume = line6_resume,
+	.reset_resume = line6_resume,
+#endif
+	.id_table = podhd_id_table,
+};
+
+module_usb_driver(podhd_driver);
+
+MODULE_DESCRIPTION("Line 6 PODHD USB driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c
new file mode 100644
index 000000000000..6d4c50c9b17d
--- /dev/null
+++ b/sound/usb/line6/toneport.c
@@ -0,0 +1,580 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *                         Emil Myhrman (emil.myhrman@gmail.com)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/wait.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/leds.h>
+#include <sound/core.h>
+#include <sound/control.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "playback.h"
+
+enum line6_device_type {
+	LINE6_GUITARPORT,
+	LINE6_PODSTUDIO_GX,
+	LINE6_PODSTUDIO_UX1,
+	LINE6_PODSTUDIO_UX2,
+	LINE6_TONEPORT_GX,
+	LINE6_TONEPORT_UX1,
+	LINE6_TONEPORT_UX2,
+};
+
+struct usb_line6_toneport;
+
+struct toneport_led {
+	struct led_classdev dev;
+	char name[64];
+	struct usb_line6_toneport *toneport;
+	bool registered;
+};
+
+struct usb_line6_toneport {
+	/* Generic Line 6 USB data */
+	struct usb_line6 line6;
+
+	/* Source selector */
+	int source;
+
+	/* Serial number of device */
+	u32 serial_number;
+
+	/* Firmware version (x 100) */
+	u8 firmware_version;
+
+	/* Timer for delayed PCM startup */
+	struct timer_list timer;
+
+	/* Device type */
+	enum line6_device_type type;
+
+	/* LED instances */
+	struct toneport_led leds[2];
+};
+
+static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2);
+
+#define TONEPORT_PCM_DELAY 1
+
+static struct snd_ratden toneport_ratden = {
+	.num_min = 44100,
+	.num_max = 44100,
+	.num_step = 1,
+	.den = 1
+};
+
+static struct line6_pcm_properties toneport_pcm_properties = {
+	.playback_hw = {
+				  .info = (SNDRV_PCM_INFO_MMAP |
+					   SNDRV_PCM_INFO_INTERLEAVED |
+					   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					   SNDRV_PCM_INFO_MMAP_VALID |
+					   SNDRV_PCM_INFO_PAUSE |
+					   SNDRV_PCM_INFO_SYNC_START),
+				  .formats = SNDRV_PCM_FMTBIT_S16_LE,
+				  .rates = SNDRV_PCM_RATE_KNOT,
+				  .rate_min = 44100,
+				  .rate_max = 44100,
+				  .channels_min = 2,
+				  .channels_max = 2,
+				  .buffer_bytes_max = 60000,
+				  .period_bytes_min = 64,
+				  .period_bytes_max = 8192,
+				  .periods_min = 1,
+				  .periods_max = 1024},
+	.capture_hw = {
+				 .info = (SNDRV_PCM_INFO_MMAP |
+					  SNDRV_PCM_INFO_INTERLEAVED |
+					  SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					  SNDRV_PCM_INFO_MMAP_VALID |
+					  SNDRV_PCM_INFO_SYNC_START),
+				 .formats = SNDRV_PCM_FMTBIT_S16_LE,
+				 .rates = SNDRV_PCM_RATE_KNOT,
+				 .rate_min = 44100,
+				 .rate_max = 44100,
+				 .channels_min = 2,
+				 .channels_max = 2,
+				 .buffer_bytes_max = 60000,
+				 .period_bytes_min = 64,
+				 .period_bytes_max = 8192,
+				 .periods_min = 1,
+				 .periods_max = 1024},
+	.rates = {
+			    .nrats = 1,
+			    .rats = &toneport_ratden},
+	.bytes_per_frame = 4
+};
+
+static const struct {
+	const char *name;
+	int code;
+} toneport_source_info[] = {
+	{"Microphone", 0x0a01},
+	{"Line", 0x0801},
+	{"Instrument", 0x0b01},
+	{"Inst & Mic", 0x0901}
+};
+
+static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
+{
+	int ret;
+
+	ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
+			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+			      cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ);
+
+	if (ret < 0) {
+		dev_err(&usbdev->dev, "send failed (error %d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/* monitor info callback */
+static int snd_toneport_monitor_info(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 256;
+	return 0;
+}
+
+/* monitor get callback */
+static int snd_toneport_monitor_get(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = line6pcm->volume_monitor;
+	return 0;
+}
+
+/* monitor put callback */
+static int snd_toneport_monitor_put(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	int err;
+
+	if (ucontrol->value.integer.value[0] == line6pcm->volume_monitor)
+		return 0;
+
+	line6pcm->volume_monitor = ucontrol->value.integer.value[0];
+
+	if (line6pcm->volume_monitor > 0) {
+		err = line6_pcm_acquire(line6pcm, LINE6_STREAM_MONITOR);
+		if (err < 0) {
+			line6pcm->volume_monitor = 0;
+			line6_pcm_release(line6pcm, LINE6_STREAM_MONITOR);
+			return err;
+		}
+	} else {
+		line6_pcm_release(line6pcm, LINE6_STREAM_MONITOR);
+	}
+
+	return 1;
+}
+
+/* source info callback */
+static int snd_toneport_source_info(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_info *uinfo)
+{
+	const int size = ARRAY_SIZE(toneport_source_info);
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = size;
+
+	if (uinfo->value.enumerated.item >= size)
+		uinfo->value.enumerated.item = size - 1;
+
+	strcpy(uinfo->value.enumerated.name,
+	       toneport_source_info[uinfo->value.enumerated.item].name);
+
+	return 0;
+}
+
+/* source get callback */
+static int snd_toneport_source_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_toneport *toneport =
+	    (struct usb_line6_toneport *)line6pcm->line6;
+	ucontrol->value.enumerated.item[0] = toneport->source;
+	return 0;
+}
+
+/* source put callback */
+static int snd_toneport_source_put(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_toneport *toneport =
+	    (struct usb_line6_toneport *)line6pcm->line6;
+	unsigned int source;
+
+	source = ucontrol->value.enumerated.item[0];
+	if (source >= ARRAY_SIZE(toneport_source_info))
+		return -EINVAL;
+	if (source == toneport->source)
+		return 0;
+
+	toneport->source = source;
+	toneport_send_cmd(toneport->line6.usbdev,
+			  toneport_source_info[source].code, 0x0000);
+	return 1;
+}
+
+static void toneport_start_pcm(unsigned long arg)
+{
+	struct usb_line6_toneport *toneport = (struct usb_line6_toneport *)arg;
+	struct usb_line6 *line6 = &toneport->line6;
+
+	line6_pcm_acquire(line6->line6pcm, LINE6_STREAM_MONITOR);
+}
+
+/* control definition */
+static struct snd_kcontrol_new toneport_control_monitor = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Monitor Playback Volume",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_toneport_monitor_info,
+	.get = snd_toneport_monitor_get,
+	.put = snd_toneport_monitor_put
+};
+
+/* source selector definition */
+static struct snd_kcontrol_new toneport_control_source = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "PCM Capture Source",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_toneport_source_info,
+	.get = snd_toneport_source_get,
+	.put = snd_toneport_source_put
+};
+
+/*
+	For the led on Guitarport.
+	Brightness goes from 0x00 to 0x26. Set a value above this to have led
+	blink.
+	(void cmd_0x02(byte red, byte green)
+*/
+
+static bool toneport_has_led(struct usb_line6_toneport *toneport)
+{
+	switch (toneport->type) {
+	case LINE6_GUITARPORT:
+	case LINE6_TONEPORT_GX:
+	/* add your device here if you are missing support for the LEDs */
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static const char * const led_colors[2] = { "red", "green" };
+static const int led_init_vals[2] = { 0x00, 0x26 };
+
+static void toneport_update_led(struct usb_line6_toneport *toneport)
+{
+	toneport_send_cmd(toneport->line6.usbdev,
+			  (toneport->leds[0].dev.brightness << 8) | 0x0002,
+			  toneport->leds[1].dev.brightness);
+}
+
+static void toneport_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct toneport_led *leds =
+		container_of(led_cdev, struct toneport_led, dev);
+	toneport_update_led(leds->toneport);
+}
+
+static int toneport_init_leds(struct usb_line6_toneport *toneport)
+{
+	struct device *dev = &toneport->line6.usbdev->dev;
+	int i, err;
+
+	for (i = 0; i < 2; i++) {
+		struct toneport_led *led = &toneport->leds[i];
+		struct led_classdev *leddev = &led->dev;
+
+		led->toneport = toneport;
+		snprintf(led->name, sizeof(led->name), "%s::%s",
+			 dev_name(dev), led_colors[i]);
+		leddev->name = led->name;
+		leddev->brightness = led_init_vals[i];
+		leddev->max_brightness = 0x26;
+		leddev->brightness_set = toneport_led_brightness_set;
+		err = led_classdev_register(dev, leddev);
+		if (err)
+			return err;
+		led->registered = true;
+	}
+
+	return 0;
+}
+
+static void toneport_remove_leds(struct usb_line6_toneport *toneport)
+{
+	struct toneport_led *led;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		led = &toneport->leds[i];
+		if (!led->registered)
+			break;
+		led_classdev_unregister(&led->dev);
+		led->registered = false;
+	}
+}
+
+static bool toneport_has_source_select(struct usb_line6_toneport *toneport)
+{
+	switch (toneport->type) {
+	case LINE6_TONEPORT_UX1:
+	case LINE6_TONEPORT_UX2:
+	case LINE6_PODSTUDIO_UX1:
+	case LINE6_PODSTUDIO_UX2:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+/*
+	Setup Toneport device.
+*/
+static void toneport_setup(struct usb_line6_toneport *toneport)
+{
+	int ticks;
+	struct usb_line6 *line6 = &toneport->line6;
+	struct usb_device *usbdev = line6->usbdev;
+
+	/* sync time on device with host: */
+	ticks = (int)get_seconds();
+	line6_write_data(line6, 0x80c6, &ticks, 4);
+
+	/* enable device: */
+	toneport_send_cmd(usbdev, 0x0301, 0x0000);
+
+	/* initialize source select: */
+	if (toneport_has_source_select(toneport))
+		toneport_send_cmd(usbdev,
+				  toneport_source_info[toneport->source].code,
+				  0x0000);
+
+	if (toneport_has_led(toneport))
+		toneport_update_led(toneport);
+
+	mod_timer(&toneport->timer, jiffies + TONEPORT_PCM_DELAY * HZ);
+}
+
+/*
+	Toneport device disconnected.
+*/
+static void line6_toneport_disconnect(struct usb_line6 *line6)
+{
+	struct usb_line6_toneport *toneport =
+		(struct usb_line6_toneport *)line6;
+
+	del_timer_sync(&toneport->timer);
+
+	if (toneport_has_led(toneport))
+		toneport_remove_leds(toneport);
+}
+
+
+/*
+	 Try to init Toneport device.
+*/
+static int toneport_init(struct usb_line6 *line6,
+			 const struct usb_device_id *id)
+{
+	int err;
+	struct usb_line6_toneport *toneport =  (struct usb_line6_toneport *) line6;
+
+	toneport->type = id->driver_info;
+	setup_timer(&toneport->timer, toneport_start_pcm,
+		    (unsigned long)toneport);
+
+	line6->disconnect = line6_toneport_disconnect;
+
+	/* initialize PCM subsystem: */
+	err = line6_init_pcm(line6, &toneport_pcm_properties);
+	if (err < 0)
+		return err;
+
+	/* register monitor control: */
+	err = snd_ctl_add(line6->card,
+			  snd_ctl_new1(&toneport_control_monitor,
+				       line6->line6pcm));
+	if (err < 0)
+		return err;
+
+	/* register source select control: */
+	if (toneport_has_source_select(toneport)) {
+		err =
+		    snd_ctl_add(line6->card,
+				snd_ctl_new1(&toneport_control_source,
+					     line6->line6pcm));
+		if (err < 0)
+			return err;
+	}
+
+	line6_read_serial_number(line6, &toneport->serial_number);
+	line6_read_data(line6, 0x80c2, &toneport->firmware_version, 1);
+
+	if (toneport_has_led(toneport)) {
+		err = toneport_init_leds(toneport);
+		if (err < 0)
+			return err;
+	}
+
+	toneport_setup(toneport);
+
+	/* register audio system: */
+	return snd_card_register(line6->card);
+}
+
+#ifdef CONFIG_PM
+/*
+	Resume Toneport device after reset.
+*/
+static int toneport_reset_resume(struct usb_interface *interface)
+{
+	toneport_setup(usb_get_intfdata(interface));
+	return line6_resume(interface);
+}
+#endif
+
+#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
+#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
+
+/* table of devices that work with this driver */
+static const struct usb_device_id toneport_id_table[] = {
+	{ LINE6_DEVICE(0x4750),    .driver_info = LINE6_GUITARPORT },
+	{ LINE6_DEVICE(0x4153),    .driver_info = LINE6_PODSTUDIO_GX },
+	{ LINE6_DEVICE(0x4150),    .driver_info = LINE6_PODSTUDIO_UX1 },
+	{ LINE6_IF_NUM(0x4151, 0), .driver_info = LINE6_PODSTUDIO_UX2 },
+	{ LINE6_DEVICE(0x4147),    .driver_info = LINE6_TONEPORT_GX },
+	{ LINE6_DEVICE(0x4141),    .driver_info = LINE6_TONEPORT_UX1 },
+	{ LINE6_IF_NUM(0x4142, 0), .driver_info = LINE6_TONEPORT_UX2 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, toneport_id_table);
+
+static const struct line6_properties toneport_properties_table[] = {
+	[LINE6_GUITARPORT] = {
+		.id = "GuitarPort",
+		.name = "GuitarPort",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODSTUDIO_GX] = {
+		.id = "PODStudioGX",
+		.name = "POD Studio GX",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODSTUDIO_UX1] = {
+		.id = "PODStudioUX1",
+		.name = "POD Studio UX1",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODSTUDIO_UX2] = {
+		.id = "PODStudioUX2",
+		.name = "POD Studio UX2",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* defaults to 44.1kHz, 16-bit */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_TONEPORT_GX] = {
+		.id = "TonePortGX",
+		.name = "TonePort GX",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_TONEPORT_UX1] = {
+		.id = "TonePortUX1",
+		.name = "TonePort UX1",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_TONEPORT_UX2] = {
+		.id = "TonePortUX2",
+		.name = "TonePort UX2",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* defaults to 44.1kHz, 16-bit */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+};
+
+/*
+	Probe USB device.
+*/
+static int toneport_probe(struct usb_interface *interface,
+			  const struct usb_device_id *id)
+{
+	return line6_probe(interface, id, "Line6-TonePort",
+			   &toneport_properties_table[id->driver_info],
+			   toneport_init, sizeof(struct usb_line6_toneport));
+}
+
+static struct usb_driver toneport_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = toneport_probe,
+	.disconnect = line6_disconnect,
+#ifdef CONFIG_PM
+	.suspend = line6_suspend,
+	.resume = line6_resume,
+	.reset_resume = toneport_reset_resume,
+#endif
+	.id_table = toneport_id_table,
+};
+
+module_usb_driver(toneport_driver);
+
+MODULE_DESCRIPTION("TonePort USB driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/usb/line6/variax.c b/sound/usb/line6/variax.c
new file mode 100644
index 000000000000..ddc23ddf0750
--- /dev/null
+++ b/sound/usb/line6/variax.c
@@ -0,0 +1,306 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/module.h>
+#include <sound/core.h>
+
+#include "driver.h"
+
+#define VARIAX_STARTUP_DELAY1 1000
+#define VARIAX_STARTUP_DELAY3 100
+#define VARIAX_STARTUP_DELAY4 100
+
+/*
+	Stages of Variax startup procedure
+*/
+enum {
+	VARIAX_STARTUP_INIT = 1,
+	VARIAX_STARTUP_VERSIONREQ,
+	VARIAX_STARTUP_WAIT,
+	VARIAX_STARTUP_ACTIVATE,
+	VARIAX_STARTUP_WORKQUEUE,
+	VARIAX_STARTUP_SETUP,
+	VARIAX_STARTUP_LAST = VARIAX_STARTUP_SETUP - 1
+};
+
+enum {
+	LINE6_PODXTLIVE_VARIAX,
+	LINE6_VARIAX
+};
+
+struct usb_line6_variax {
+	/* Generic Line 6 USB data */
+	struct usb_line6 line6;
+
+	/* Buffer for activation code */
+	unsigned char *buffer_activate;
+
+	/* Handler for device initialization */
+	struct work_struct startup_work;
+
+	/* Timers for device initialization */
+	struct timer_list startup_timer1;
+	struct timer_list startup_timer2;
+
+	/* Current progress in startup procedure */
+	int startup_progress;
+};
+
+#define VARIAX_OFFSET_ACTIVATE 7
+
+/*
+	This message is sent by the device during initialization and identifies
+	the connected guitar version.
+*/
+static const char variax_init_version[] = {
+	0xf0, 0x7e, 0x7f, 0x06, 0x02, 0x00, 0x01, 0x0c,
+	0x07, 0x00, 0x00, 0x00
+};
+
+/*
+	This message is the last one sent by the device during initialization.
+*/
+static const char variax_init_done[] = {
+	0xf0, 0x00, 0x01, 0x0c, 0x07, 0x00, 0x6b
+};
+
+static const char variax_activate[] = {
+	0xf0, 0x00, 0x01, 0x0c, 0x07, 0x00, 0x2a, 0x01,
+	0xf7
+};
+
+/* forward declarations: */
+static void variax_startup2(unsigned long data);
+static void variax_startup4(unsigned long data);
+static void variax_startup5(unsigned long data);
+
+static void variax_activate_async(struct usb_line6_variax *variax, int a)
+{
+	variax->buffer_activate[VARIAX_OFFSET_ACTIVATE] = a;
+	line6_send_raw_message_async(&variax->line6, variax->buffer_activate,
+				     sizeof(variax_activate));
+}
+
+/*
+	Variax startup procedure.
+	This is a sequence of functions with special requirements (e.g., must
+	not run immediately after initialization, must not run in interrupt
+	context). After the last one has finished, the device is ready to use.
+*/
+
+static void variax_startup1(struct usb_line6_variax *variax)
+{
+	CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_INIT);
+
+	/* delay startup procedure: */
+	line6_start_timer(&variax->startup_timer1, VARIAX_STARTUP_DELAY1,
+			  variax_startup2, (unsigned long)variax);
+}
+
+static void variax_startup2(unsigned long data)
+{
+	struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
+	struct usb_line6 *line6 = &variax->line6;
+
+	/* schedule another startup procedure until startup is complete: */
+	if (variax->startup_progress >= VARIAX_STARTUP_LAST)
+		return;
+
+	variax->startup_progress = VARIAX_STARTUP_VERSIONREQ;
+	line6_start_timer(&variax->startup_timer1, VARIAX_STARTUP_DELAY1,
+			  variax_startup2, (unsigned long)variax);
+
+	/* request firmware version: */
+	line6_version_request_async(line6);
+}
+
+static void variax_startup3(struct usb_line6_variax *variax)
+{
+	CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_WAIT);
+
+	/* delay startup procedure: */
+	line6_start_timer(&variax->startup_timer2, VARIAX_STARTUP_DELAY3,
+			  variax_startup4, (unsigned long)variax);
+}
+
+static void variax_startup4(unsigned long data)
+{
+	struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
+
+	CHECK_STARTUP_PROGRESS(variax->startup_progress,
+			       VARIAX_STARTUP_ACTIVATE);
+
+	/* activate device: */
+	variax_activate_async(variax, 1);
+	line6_start_timer(&variax->startup_timer2, VARIAX_STARTUP_DELAY4,
+			  variax_startup5, (unsigned long)variax);
+}
+
+static void variax_startup5(unsigned long data)
+{
+	struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
+
+	CHECK_STARTUP_PROGRESS(variax->startup_progress,
+			       VARIAX_STARTUP_WORKQUEUE);
+
+	/* schedule work for global work queue: */
+	schedule_work(&variax->startup_work);
+}
+
+static void variax_startup6(struct work_struct *work)
+{
+	struct usb_line6_variax *variax =
+	    container_of(work, struct usb_line6_variax, startup_work);
+
+	CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_SETUP);
+
+	/* ALSA audio interface: */
+	snd_card_register(variax->line6.card);
+}
+
+/*
+	Process a completely received message.
+*/
+static void line6_variax_process_message(struct usb_line6 *line6)
+{
+	struct usb_line6_variax *variax = (struct usb_line6_variax *) line6;
+	const unsigned char *buf = variax->line6.buffer_message;
+
+	switch (buf[0]) {
+	case LINE6_RESET:
+		dev_info(variax->line6.ifcdev, "VARIAX reset\n");
+		break;
+
+	case LINE6_SYSEX_BEGIN:
+		if (memcmp(buf + 1, variax_init_version + 1,
+			   sizeof(variax_init_version) - 1) == 0) {
+			variax_startup3(variax);
+		} else if (memcmp(buf + 1, variax_init_done + 1,
+				  sizeof(variax_init_done) - 1) == 0) {
+			/* notify of complete initialization: */
+			variax_startup4((unsigned long)variax);
+		}
+		break;
+	}
+}
+
+/*
+	Variax destructor.
+*/
+static void line6_variax_disconnect(struct usb_line6 *line6)
+{
+	struct usb_line6_variax *variax = (struct usb_line6_variax *)line6;
+
+	del_timer(&variax->startup_timer1);
+	del_timer(&variax->startup_timer2);
+	cancel_work_sync(&variax->startup_work);
+
+	kfree(variax->buffer_activate);
+}
+
+/*
+	 Try to init workbench device.
+*/
+static int variax_init(struct usb_line6 *line6,
+		       const struct usb_device_id *id)
+{
+	struct usb_line6_variax *variax = (struct usb_line6_variax *) line6;
+	int err;
+
+	line6->process_message = line6_variax_process_message;
+	line6->disconnect = line6_variax_disconnect;
+
+	init_timer(&variax->startup_timer1);
+	init_timer(&variax->startup_timer2);
+	INIT_WORK(&variax->startup_work, variax_startup6);
+
+	/* initialize USB buffers: */
+	variax->buffer_activate = kmemdup(variax_activate,
+					  sizeof(variax_activate), GFP_KERNEL);
+
+	if (variax->buffer_activate == NULL)
+		return -ENOMEM;
+
+	/* initialize MIDI subsystem: */
+	err = line6_init_midi(&variax->line6);
+	if (err < 0)
+		return err;
+
+	/* initiate startup procedure: */
+	variax_startup1(variax);
+	return 0;
+}
+
+#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
+#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
+
+/* table of devices that work with this driver */
+static const struct usb_device_id variax_id_table[] = {
+	{ LINE6_IF_NUM(0x4650, 1), .driver_info = LINE6_PODXTLIVE_VARIAX },
+	{ LINE6_DEVICE(0x534d),    .driver_info = LINE6_VARIAX },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, variax_id_table);
+
+static const struct line6_properties variax_properties_table[] = {
+	[LINE6_PODXTLIVE_VARIAX] = {
+		.id = "PODxtLive",
+		.name = "PODxt Live",
+		.capabilities	= LINE6_CAP_CONTROL,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x86,
+		.ep_ctrl_w = 0x05,
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_VARIAX] = {
+		.id = "Variax",
+		.name = "Variax Workbench",
+		.capabilities	= LINE6_CAP_CONTROL,
+		.altsetting = 1,
+		.ep_ctrl_r = 0x82,
+		.ep_ctrl_w = 0x01,
+		/* no audio channel */
+	}
+};
+
+/*
+	Probe USB device.
+*/
+static int variax_probe(struct usb_interface *interface,
+			const struct usb_device_id *id)
+{
+	return line6_probe(interface, id, "Line6-Variax",
+			   &variax_properties_table[id->driver_info],
+			   variax_init, sizeof(struct usb_line6_variax));
+}
+
+static struct usb_driver variax_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = variax_probe,
+	.disconnect = line6_disconnect,
+#ifdef CONFIG_PM
+	.suspend = line6_suspend,
+	.resume = line6_resume,
+	.reset_resume = line6_resume,
+#endif
+	.id_table = variax_id_table,
+};
+
+module_usb_driver(variax_driver);
+
+MODULE_DESCRIPTION("Vairax Workbench USB driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 5bfb695547f8..417ebb11cf48 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -2292,14 +2292,13 @@ int snd_usbmidi_create(struct snd_card *card,
 	umidi->iface = iface;
 	umidi->quirk = quirk;
 	umidi->usb_protocol_ops = &snd_usbmidi_standard_ops;
-	init_timer(&umidi->error_timer);
 	spin_lock_init(&umidi->disc_lock);
 	init_rwsem(&umidi->disc_rwsem);
 	mutex_init(&umidi->mutex);
 	umidi->usb_id = USB_ID(le16_to_cpu(umidi->dev->descriptor.idVendor),
 			       le16_to_cpu(umidi->dev->descriptor.idProduct));
-	umidi->error_timer.function = snd_usbmidi_error_timer;
-	umidi->error_timer.data = (unsigned long)umidi;
+	setup_timer(&umidi->error_timer, snd_usbmidi_error_timer,
+		    (unsigned long)umidi);
 
 	/* detect the endpoint(s) to use */
 	memset(endpoints, 0, sizeof(endpoints));
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 0d8aba5fe1a8..b4ef410e5a98 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1464,6 +1464,14 @@ static void prepare_playback_urb(struct snd_usb_substream *subs,
 	subs->last_frame_number = usb_get_current_frame_number(subs->dev);
 	subs->last_frame_number &= 0xFF; /* keep 8 LSBs */
 
+	if (subs->trigger_tstamp_pending_update) {
+		/* this is the first actual URB submitted,
+		 * update trigger timestamp to reflect actual start time
+		 */
+		snd_pcm_gettime(runtime, &runtime->trigger_tstamp);
+		subs->trigger_tstamp_pending_update = false;
+	}
+
 	spin_unlock_irqrestore(&subs->lock, flags);
 	urb->transfer_buffer_length = bytes;
 	if (period_elapsed)
@@ -1550,6 +1558,7 @@ static int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substrea
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
+		subs->trigger_tstamp_pending_update = true;
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		subs->data_endpoint->prepare_data_urb = prepare_playback_urb;
 		subs->data_endpoint->retire_data_urb = retire_playback_urb;
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 0a598af9b38b..67d476548dcf 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2486,6 +2486,28 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 
+{
+	/* Akai MPC Element */
+	USB_DEVICE(0x09e8, 0x0021),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = & (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_MIDI_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
+
 /* TerraTec devices */
 {
 	USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0012),
diff --git a/sound/usb/usx2y/usb_stream.h b/sound/usb/usx2y/usb_stream.h
index 4dd74ab1e9cc..90369001eab6 100644
--- a/sound/usb/usx2y/usb_stream.h
+++ b/sound/usb/usx2y/usb_stream.h
@@ -1,76 +1,7 @@
-/*
- * Copyright (C) 2007, 2008 Karsten Wiese <fzu@wemgehoertderstaat.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+#ifndef __USB_STREAM_H
+#define __USB_STREAM_H
 
-#define USB_STREAM_INTERFACE_VERSION 2
-
-#define SNDRV_USB_STREAM_IOCTL_SET_PARAMS \
-	_IOW('H', 0x90, struct usb_stream_config)
-
-struct usb_stream_packet {
-	unsigned offset;
-	unsigned length;
-};
-
-
-struct usb_stream_config {
-	unsigned version;
-	unsigned sample_rate;
-	unsigned period_frames;
-	unsigned frame_size;
-};
-
-struct usb_stream {
-	struct usb_stream_config cfg;
-	unsigned read_size;
-	unsigned write_size;
-
-	int period_size;
-
-	unsigned state;
-
-	int idle_insize;
-	int idle_outsize;
-	int sync_packet;
-	unsigned insize_done;
-	unsigned periods_done;
-	unsigned periods_polled;
-
-	struct usb_stream_packet outpacket[2];
-	unsigned		 inpackets;
-	unsigned		 inpacket_head;
-	unsigned		 inpacket_split;
-	unsigned		 inpacket_split_at;
-	unsigned		 next_inpacket_split;
-	unsigned		 next_inpacket_split_at;
-	struct usb_stream_packet inpacket[0];
-};
-
-enum usb_stream_state {
-	usb_stream_invalid,
-	usb_stream_stopped,
-	usb_stream_sync0,
-	usb_stream_sync1,
-	usb_stream_ready,
-	usb_stream_running,
-	usb_stream_xrun,
-};
-
-#if __KERNEL__
+#include <uapi/sound/usb_stream.h>
 
 #define USB_STREAM_NURBS 4
 #define USB_STREAM_URBDEPTH 4
@@ -108,5 +39,4 @@ void usb_stream_free(struct usb_stream_kernel *);
 int usb_stream_start(struct usb_stream_kernel *);
 void usb_stream_stop(struct usb_stream_kernel *);
 
-
-#endif
+#endif /* __USB_STREAM_H */