Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...

1 files changed, 58 insertions, 1 deletions

diff --git a/tools/include/linux/btf_ids.h b/tools/include/linux/btf_ids.h
index 4867d549e3c1..57890b357f85 100644
--- a/tools/include/linux/btf_ids.h
+++ b/tools/include/linux/btf_ids.h
@@ -3,6 +3,11 @@
 #ifndef _LINUX_BTF_IDS_H
 #define _LINUX_BTF_IDS_H
 
+struct btf_id_set {
+	u32 cnt;
+	u32 ids[];
+};
+
 #ifdef CONFIG_DEBUG_INFO_BTF
 
 #include <linux/compiler.h> /* for __PASTE */
@@ -62,7 +67,7 @@ asm(							\
 ".pushsection " BTF_IDS_SECTION ",\"a\";       \n"	\
 "." #scope " " #name ";                        \n"	\
 #name ":;                                      \n"	\
-".popsection;                                  \n");	\
+".popsection;                                  \n");
 
 #define BTF_ID_LIST(name)				\
 __BTF_ID_LIST(name, local)				\
@@ -71,6 +76,13 @@ extern u32 name[];
 #define BTF_ID_LIST_GLOBAL(name)			\
 __BTF_ID_LIST(name, globl)
 
+/* The BTF_ID_LIST_SINGLE macro defines a BTF_ID_LIST with
+ * a single entry.
+ */
+#define BTF_ID_LIST_SINGLE(name, prefix, typename)	\
+	BTF_ID_LIST(name) \
+	BTF_ID(prefix, typename)
+
 /*
  * The BTF_ID_UNUSED macro defines 4 zero bytes.
  * It's used when we want to define 'unused' entry
@@ -88,12 +100,57 @@ asm(							\
 ".zero 4                                       \n"	\
 ".popsection;                                  \n");
 
+/*
+ * The BTF_SET_START/END macros pair defines sorted list of
+ * BTF IDs plus its members count, with following layout:
+ *
+ * BTF_SET_START(list)
+ * BTF_ID(type1, name1)
+ * BTF_ID(type2, name2)
+ * BTF_SET_END(list)
+ *
+ * __BTF_ID__set__list:
+ * .zero 4
+ * list:
+ * __BTF_ID__type1__name1__3:
+ * .zero 4
+ * __BTF_ID__type2__name2__4:
+ * .zero 4
+ *
+ */
+#define __BTF_SET_START(name, scope)			\
+asm(							\
+".pushsection " BTF_IDS_SECTION ",\"a\";       \n"	\
+"." #scope " __BTF_ID__set__" #name ";         \n"	\
+"__BTF_ID__set__" #name ":;                    \n"	\
+".zero 4                                       \n"	\
+".popsection;                                  \n");
+
+#define BTF_SET_START(name)				\
+__BTF_ID_LIST(name, local)				\
+__BTF_SET_START(name, local)
+
+#define BTF_SET_START_GLOBAL(name)			\
+__BTF_ID_LIST(name, globl)				\
+__BTF_SET_START(name, globl)
+
+#define BTF_SET_END(name)				\
+asm(							\
+".pushsection " BTF_IDS_SECTION ",\"a\";      \n"	\
+".size __BTF_ID__set__" #name ", .-" #name "  \n"	\
+".popsection;                                 \n");	\
+extern struct btf_id_set name;
+
 #else
 
 #define BTF_ID_LIST(name) static u32 name[5];
 #define BTF_ID(prefix, name)
 #define BTF_ID_UNUSED
 #define BTF_ID_LIST_GLOBAL(name) u32 name[1];
+#define BTF_ID_LIST_SINGLE(name, prefix, typename) static u32 name[1];
+#define BTF_SET_START(name) static struct btf_id_set name = { 0 };
+#define BTF_SET_START_GLOBAL(name) static struct btf_id_set name = { 0 };
+#define BTF_SET_END(name)
 
 #endif /* CONFIG_DEBUG_INFO_BTF */