Merge tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, netfilter, and ieee802154.

  Current release - regressions:

   - Partially revert "net/smc: Add netlink net namespace support", fix
     uABI breakage

   - netfilter:
      - nft_ct: fix use after free when attaching zone template
      - nft_byteorder: track register operations

  Previous releases - regressions:

   - ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

   - phy: qca8081: fix speeds lower than 2.5Gb/s

   - sched: fix use-after-free in tc_new_tfilter()

  Previous releases - always broken:

   - tcp: fix mem under-charging with zerocopy sendmsg()

   - tcp: add missing tcp_skb_can_collapse() test in
     tcp_shift_skb_data()

   - neigh: do not trigger immediate probes on NUD_FAILED from
     neigh_managed_work, avoid a deadlock

   - bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
     false-positives

   - netfilter: nft_reject_bridge: fix for missing reply from prerouting

   - smc: forward wakeup to smc socket waitqueue after fallback

   - ieee802154:
      - return meaningful error codes from the netlink helpers
      - mcr20a: fix lifs/sifs periods
      - at86rf230, ca8210: stop leaking skbs on error paths

   - macsec: add missing un-offload call for NETDEV_UNREGISTER of parent

   - ax25: add refcount in ax25_dev to avoid UAF bugs

   - eth: mlx5e:
      - fix SFP module EEPROM query
      - fix broken SKB allocation in HW-GRO
      - IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows

   - eth: amd-xgbe:
      - fix skb data length underflow
      - ensure reset of the tx_timer_active flag, avoid Tx timeouts

   - eth: stmmac: fix runtime pm use in stmmac_dvr_remove()

   - eth: e1000e: handshake with CSME starts from Alder Lake platforms"

* tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  ax25: fix reference count leaks of ax25_dev
  net: stmmac: ensure PTP time register reads are consistent
  net: ipa: request IPA register values be retained
  dt-bindings: net: qcom,ipa: add optional qcom,qmp property
  tools/resolve_btfids: Do not print any commands when building silently
  bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
  net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
  tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
  net: sparx5: do not refer to skb after passing it on
  Partially revert "net/smc: Add netlink net namespace support"
  net/mlx5e: Avoid field-overflowing memcpy()
  net/mlx5e: Use struct_group() for memcpy() region
  net/mlx5e: Avoid implicit modify hdr for decap drop rule
  net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
  net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
  net/mlx5e: Don't treat small ceil values as unlimited in HTB offload
  net/mlx5: E-Switch, Fix uninitialized variable modact
  net/mlx5e: Fix handling of wrong devices during bond netevent
  net/mlx5e: Fix broken SKB allocation in HW-GRO
  net/mlx5e: Fix wrong calculation of header index in HW_GRO
  ...

1 files changed, 0 insertions, 229 deletions

diff --git a/tools/include/uapi/linux/lirc.h b/tools/include/uapi/linux/lirc.h
deleted file mode 100644
index 45fcbf99d72e..000000000000
--- a/tools/include/uapi/linux/lirc.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * lirc.h - linux infrared remote control header file
- * last modified 2010/07/13 by Jarod Wilson
- */
-
-#ifndef _LINUX_LIRC_H
-#define _LINUX_LIRC_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#define PULSE_BIT       0x01000000
-#define PULSE_MASK      0x00FFFFFF
-
-#define LIRC_MODE2_SPACE     0x00000000
-#define LIRC_MODE2_PULSE     0x01000000
-#define LIRC_MODE2_FREQUENCY 0x02000000
-#define LIRC_MODE2_TIMEOUT   0x03000000
-
-#define LIRC_VALUE_MASK      0x00FFFFFF
-#define LIRC_MODE2_MASK      0xFF000000
-
-#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
-#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
-#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
-#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
-
-#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
-#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
-
-#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
-#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
-#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
-#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
-
-/* used heavily by lirc userspace */
-#define lirc_t int
-
-/*** lirc compatible hardware features ***/
-
-#define LIRC_MODE2SEND(x) (x)
-#define LIRC_SEND2MODE(x) (x)
-#define LIRC_MODE2REC(x) ((x) << 16)
-#define LIRC_REC2MODE(x) ((x) >> 16)
-
-#define LIRC_MODE_RAW                  0x00000001
-#define LIRC_MODE_PULSE                0x00000002
-#define LIRC_MODE_MODE2                0x00000004
-#define LIRC_MODE_SCANCODE             0x00000008
-#define LIRC_MODE_LIRCCODE             0x00000010
-
-
-#define LIRC_CAN_SEND_RAW              LIRC_MODE2SEND(LIRC_MODE_RAW)
-#define LIRC_CAN_SEND_PULSE            LIRC_MODE2SEND(LIRC_MODE_PULSE)
-#define LIRC_CAN_SEND_MODE2            LIRC_MODE2SEND(LIRC_MODE_MODE2)
-#define LIRC_CAN_SEND_LIRCCODE         LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
-
-#define LIRC_CAN_SEND_MASK             0x0000003f
-
-#define LIRC_CAN_SET_SEND_CARRIER      0x00000100
-#define LIRC_CAN_SET_SEND_DUTY_CYCLE   0x00000200
-#define LIRC_CAN_SET_TRANSMITTER_MASK  0x00000400
-
-#define LIRC_CAN_REC_RAW               LIRC_MODE2REC(LIRC_MODE_RAW)
-#define LIRC_CAN_REC_PULSE             LIRC_MODE2REC(LIRC_MODE_PULSE)
-#define LIRC_CAN_REC_MODE2             LIRC_MODE2REC(LIRC_MODE_MODE2)
-#define LIRC_CAN_REC_SCANCODE          LIRC_MODE2REC(LIRC_MODE_SCANCODE)
-#define LIRC_CAN_REC_LIRCCODE          LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
-
-#define LIRC_CAN_REC_MASK              LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
-
-#define LIRC_CAN_SET_REC_CARRIER       (LIRC_CAN_SET_SEND_CARRIER << 16)
-#define LIRC_CAN_SET_REC_DUTY_CYCLE    (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
-
-#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
-#define LIRC_CAN_SET_REC_CARRIER_RANGE    0x80000000
-#define LIRC_CAN_GET_REC_RESOLUTION       0x20000000
-#define LIRC_CAN_SET_REC_TIMEOUT          0x10000000
-#define LIRC_CAN_SET_REC_FILTER           0x08000000
-
-#define LIRC_CAN_MEASURE_CARRIER          0x02000000
-#define LIRC_CAN_USE_WIDEBAND_RECEIVER    0x04000000
-
-#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
-#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
-
-#define LIRC_CAN_NOTIFY_DECODE            0x01000000
-
-/*** IOCTL commands for lirc driver ***/
-
-#define LIRC_GET_FEATURES              _IOR('i', 0x00000000, __u32)
-
-#define LIRC_GET_SEND_MODE             _IOR('i', 0x00000001, __u32)
-#define LIRC_GET_REC_MODE              _IOR('i', 0x00000002, __u32)
-#define LIRC_GET_REC_RESOLUTION        _IOR('i', 0x00000007, __u32)
-
-#define LIRC_GET_MIN_TIMEOUT           _IOR('i', 0x00000008, __u32)
-#define LIRC_GET_MAX_TIMEOUT           _IOR('i', 0x00000009, __u32)
-
-/* code length in bits, currently only for LIRC_MODE_LIRCCODE */
-#define LIRC_GET_LENGTH                _IOR('i', 0x0000000f, __u32)
-
-#define LIRC_SET_SEND_MODE             _IOW('i', 0x00000011, __u32)
-#define LIRC_SET_REC_MODE              _IOW('i', 0x00000012, __u32)
-/* Note: these can reset the according pulse_width */
-#define LIRC_SET_SEND_CARRIER          _IOW('i', 0x00000013, __u32)
-#define LIRC_SET_REC_CARRIER           _IOW('i', 0x00000014, __u32)
-#define LIRC_SET_SEND_DUTY_CYCLE       _IOW('i', 0x00000015, __u32)
-#define LIRC_SET_TRANSMITTER_MASK      _IOW('i', 0x00000017, __u32)
-
-/*
- * when a timeout != 0 is set the driver will send a
- * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
- * never sent, timeout is disabled by default
- */
-#define LIRC_SET_REC_TIMEOUT           _IOW('i', 0x00000018, __u32)
-
-/* 1 enables, 0 disables timeout reports in MODE2 */
-#define LIRC_SET_REC_TIMEOUT_REPORTS   _IOW('i', 0x00000019, __u32)
-
-/*
- * if enabled from the next key press on the driver will send
- * LIRC_MODE2_FREQUENCY packets
- */
-#define LIRC_SET_MEASURE_CARRIER_MODE	_IOW('i', 0x0000001d, __u32)
-
-/*
- * to set a range use LIRC_SET_REC_CARRIER_RANGE with the
- * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound
- */
-#define LIRC_SET_REC_CARRIER_RANGE     _IOW('i', 0x0000001f, __u32)
-
-#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
-
-/*
- * Return the recording timeout, which is either set by
- * the ioctl LIRC_SET_REC_TIMEOUT or by the kernel after setting the protocols.
- */
-#define LIRC_GET_REC_TIMEOUT	       _IOR('i', 0x00000024, __u32)
-
-/*
- * struct lirc_scancode - decoded scancode with protocol for use with
- *	LIRC_MODE_SCANCODE
- *
- * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR
- *	was decoded.
- * @flags: should be 0 for transmit. When receiving scancodes,
- *	LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set
- *	depending on the protocol
- * @rc_proto: see enum rc_proto
- * @keycode: the translated keycode. Set to 0 for transmit.
- * @scancode: the scancode received or to be sent
- */
-struct lirc_scancode {
-	__u64	timestamp;
-	__u16	flags;
-	__u16	rc_proto;
-	__u32	keycode;
-	__u64	scancode;
-};
-
-/* Set if the toggle bit of rc-5 or rc-6 is enabled */
-#define LIRC_SCANCODE_FLAG_TOGGLE	1
-/* Set if this is a nec or sanyo repeat */
-#define LIRC_SCANCODE_FLAG_REPEAT	2
-
-/**
- * enum rc_proto - the Remote Controller protocol
- *
- * @RC_PROTO_UNKNOWN: Protocol not known
- * @RC_PROTO_OTHER: Protocol known but proprietary
- * @RC_PROTO_RC5: Philips RC5 protocol
- * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
- * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
- * @RC_PROTO_JVC: JVC protocol
- * @RC_PROTO_SONY12: Sony 12 bit protocol
- * @RC_PROTO_SONY15: Sony 15 bit protocol
- * @RC_PROTO_SONY20: Sony 20 bit protocol
- * @RC_PROTO_NEC: NEC protocol
- * @RC_PROTO_NECX: Extended NEC protocol
- * @RC_PROTO_NEC32: NEC 32 bit protocol
- * @RC_PROTO_SANYO: Sanyo protocol
- * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
- * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
- * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
- * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
- * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
- * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
- * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
- * @RC_PROTO_SHARP: Sharp protocol
- * @RC_PROTO_XMP: XMP protocol
- * @RC_PROTO_CEC: CEC protocol
- * @RC_PROTO_IMON: iMon Pad protocol
- * @RC_PROTO_RCMM12: RC-MM protocol 12 bits
- * @RC_PROTO_RCMM24: RC-MM protocol 24 bits
- * @RC_PROTO_RCMM32: RC-MM protocol 32 bits
- */
-enum rc_proto {
-	RC_PROTO_UNKNOWN	= 0,
-	RC_PROTO_OTHER		= 1,
-	RC_PROTO_RC5		= 2,
-	RC_PROTO_RC5X_20	= 3,
-	RC_PROTO_RC5_SZ		= 4,
-	RC_PROTO_JVC		= 5,
-	RC_PROTO_SONY12		= 6,
-	RC_PROTO_SONY15		= 7,
-	RC_PROTO_SONY20		= 8,
-	RC_PROTO_NEC		= 9,
-	RC_PROTO_NECX		= 10,
-	RC_PROTO_NEC32		= 11,
-	RC_PROTO_SANYO		= 12,
-	RC_PROTO_MCIR2_KBD	= 13,
-	RC_PROTO_MCIR2_MSE	= 14,
-	RC_PROTO_RC6_0		= 15,
-	RC_PROTO_RC6_6A_20	= 16,
-	RC_PROTO_RC6_6A_24	= 17,
-	RC_PROTO_RC6_6A_32	= 18,
-	RC_PROTO_RC6_MCE	= 19,
-	RC_PROTO_SHARP		= 20,
-	RC_PROTO_XMP		= 21,
-	RC_PROTO_CEC		= 22,
-	RC_PROTO_IMON		= 23,
-	RC_PROTO_RCMM12		= 24,
-	RC_PROTO_RCMM24		= 25,
-	RC_PROTO_RCMM32		= 26,
-};
-
-#endif