Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

include/linux/mlx5/driver.h
  617f5db1a626 ("RDMA/mlx5: Fix affinity assignment")
  dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/

tools/testing/selftests/net/mptcp/mptcp_join.sh
  47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
  425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not")
  45b1a1227a7a ("mptcp: introduces more address related mibs")
  0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

20 files changed, 535 insertions, 253 deletions

diff --git a/tools/testing/radix-tree/Makefile b/tools/testing/radix-tree/Makefile
index caf32a9b9608..7527f738b4a1 100644
--- a/tools/testing/radix-tree/Makefile
+++ b/tools/testing/radix-tree/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 
-CFLAGS += -I. -I../../include -g -Og -Wall -D_LGPL_SOURCE -fsanitize=address \
-	  -fsanitize=undefined
+CFLAGS += -I. -I../../include -I../../../lib -g -Og -Wall \
+	  -D_LGPL_SOURCE -fsanitize=address -fsanitize=undefined
 LDFLAGS += -fsanitize=address -fsanitize=undefined
 LDLIBS+= -lpthread -lurcu
 TARGETS = main idr-test multiorder xarray maple
@@ -49,6 +49,7 @@ $(OFILES): Makefile *.h */*.h generated/map-shift.h generated/bit-length.h \
 	../../../include/linux/xarray.h \
 	../../../include/linux/maple_tree.h \
 	../../../include/linux/radix-tree.h \
+	../../../lib/radix-tree.h \
 	../../../include/linux/idr.h
 
 radix-tree.c: ../../../lib/radix-tree.c
diff --git a/tools/testing/selftests/alsa/pcm-test.c b/tools/testing/selftests/alsa/pcm-test.c
index 3e390fe67eb9..b7eef32addb4 100644
--- a/tools/testing/selftests/alsa/pcm-test.c
+++ b/tools/testing/selftests/alsa/pcm-test.c
@@ -381,7 +381,7 @@ __format:
 		goto __close;
 	}
 	if (rrate != rate) {
-		snprintf(msg, sizeof(msg), "rate mismatch %ld != %ld", rate, rrate);
+		snprintf(msg, sizeof(msg), "rate mismatch %ld != %d", rate, rrate);
 		goto __close;
 	}
 	rperiod_size = period_size;
@@ -447,24 +447,24 @@ __format:
 			frames = snd_pcm_writei(handle, samples, rate);
 			if (frames < 0) {
 				snprintf(msg, sizeof(msg),
-					 "Write failed: expected %d, wrote %li", rate, frames);
+					 "Write failed: expected %ld, wrote %li", rate, frames);
 				goto __close;
 			}
 			if (frames < rate) {
 				snprintf(msg, sizeof(msg),
-					 "expected %d, wrote %li", rate, frames);
+					 "expected %ld, wrote %li", rate, frames);
 				goto __close;
 			}
 		} else {
 			frames = snd_pcm_readi(handle, samples, rate);
 			if (frames < 0) {
 				snprintf(msg, sizeof(msg),
-					 "expected %d, wrote %li", rate, frames);
+					 "expected %ld, wrote %li", rate, frames);
 				goto __close;
 			}
 			if (frames < rate) {
 				snprintf(msg, sizeof(msg),
-					 "expected %d, wrote %li", rate, frames);
+					 "expected %ld, wrote %li", rate, frames);
 				goto __close;
 			}
 		}
diff --git a/tools/testing/selftests/net/forwarding/hw_stats_l3.sh b/tools/testing/selftests/net/forwarding/hw_stats_l3.sh
index 432fe8469851..48584a51388f 100755
--- a/tools/testing/selftests/net/forwarding/hw_stats_l3.sh
+++ b/tools/testing/selftests/net/forwarding/hw_stats_l3.sh
@@ -84,8 +84,9 @@ h2_destroy()
 
 router_rp1_200_create()
 {
-	ip link add name $rp1.200 up \
-		link $rp1 addrgenmode eui64 type vlan id 200
+	ip link add name $rp1.200 link $rp1 type vlan id 200
+	ip link set dev $rp1.200 addrgenmode eui64
+	ip link set dev $rp1.200 up
 	ip address add dev $rp1.200 192.0.2.2/28
 	ip address add dev $rp1.200 2001:db8:1::2/64
 	ip stats set dev $rp1.200 l3_stats on
@@ -256,9 +257,11 @@ reapply_config()
 
 	router_rp1_200_destroy
 
-	ip link add name $rp1.200 link $rp1 addrgenmode none type vlan id 200
+	ip link add name $rp1.200 link $rp1 type vlan id 200
+	ip link set dev $rp1.200 addrgenmode none
 	ip stats set dev $rp1.200 l3_stats on
-	ip link set dev $rp1.200 up addrgenmode eui64
+	ip link set dev $rp1.200 addrgenmode eui64
+	ip link set dev $rp1.200 up
 	ip address add dev $rp1.200 192.0.2.2/28
 	ip address add dev $rp1.200 2001:db8:1::2/64
 }
diff --git a/tools/testing/selftests/net/mptcp/config b/tools/testing/selftests/net/mptcp/config
index 38021a0dd527..6032f9b23c4c 100644
--- a/tools/testing/selftests/net/mptcp/config
+++ b/tools/testing/selftests/net/mptcp/config
@@ -1,3 +1,4 @@
+CONFIG_KALLSYMS=y
 CONFIG_MPTCP=y
 CONFIG_IPV6=y
 CONFIG_MPTCP_IPV6=y
diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh
index 4eacdb1ab962..fa9e09ad97d9 100755
--- a/tools/testing/selftests/net/mptcp/diag.sh
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -55,16 +55,20 @@ __chk_nr()
 {
 	local command="$1"
 	local expected=$2
-	local msg nr
+	local msg="$3"
+	local skip="${4:-SKIP}"
+	local nr
 
-	shift 2
-	msg=$*
 	nr=$(eval $command)
 
 	printf "%-50s" "$msg"
 	if [ $nr != $expected ]; then
-		echo "[ fail ] expected $expected found $nr"
-		ret=$test_cnt
+		if [ $nr = "$skip" ] && ! mptcp_lib_expect_all_features; then
+			echo "[ skip ] Feature probably not supported"
+		else
+			echo "[ fail ] expected $expected found $nr"
+			ret=$test_cnt
+		fi
 	else
 		echo "[  ok  ]"
 	fi
@@ -76,12 +80,12 @@ __chk_msk_nr()
 	local condition=$1
 	shift 1
 
-	__chk_nr "ss -inmHMN $ns | $condition" $*
+	__chk_nr "ss -inmHMN $ns | $condition" "$@"
 }
 
 chk_msk_nr()
 {
-	__chk_msk_nr "grep -c token:" $*
+	__chk_msk_nr "grep -c token:" "$@"
 }
 
 wait_msk_nr()
@@ -119,37 +123,26 @@ wait_msk_nr()
 
 chk_msk_fallback_nr()
 {
-		__chk_msk_nr "grep -c fallback" $*
+	__chk_msk_nr "grep -c fallback" "$@"
 }
 
 chk_msk_remote_key_nr()
 {
-		__chk_msk_nr "grep -c remote_key" $*
+	__chk_msk_nr "grep -c remote_key" "$@"
 }
 
 __chk_listen()
 {
 	local filter="$1"
 	local expected=$2
+	local msg="$3"
 
-	shift 2
-	msg=$*
-
-	nr=$(ss -N $ns -Ml "$filter" | grep -c LISTEN)
-	printf "%-50s" "$msg"
-
-	if [ $nr != $expected ]; then
-		echo "[ fail ] expected $expected found $nr"
-		ret=$test_cnt
-	else
-		echo "[  ok  ]"
-	fi
+	__chk_nr "ss -N $ns -Ml '$filter' | grep -c LISTEN" "$expected" "$msg" 0
 }
 
 chk_msk_listen()
 {
 	lport=$1
-	local msg="check for listen socket"
 
 	# destination port search should always return empty list
 	__chk_listen "dport $lport" 0 "listen match for dport $lport"
@@ -167,10 +160,9 @@ chk_msk_listen()
 chk_msk_inuse()
 {
 	local expected=$1
+	local msg="$2"
 	local listen_nr
 
-	shift 1
-
 	listen_nr=$(ss -N "${ns}" -Ml | grep -c LISTEN)
 	expected=$((expected + listen_nr))
 
@@ -181,7 +173,7 @@ chk_msk_inuse()
 		sleep 0.1
 	done
 
-	__chk_nr get_msk_inuse $expected $*
+	__chk_nr get_msk_inuse $expected "$msg" 0
 }
 
 # $1: ns, $2: port
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
index c1f7bac19942..773dd770a567 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
@@ -144,6 +144,7 @@ cleanup()
 }
 
 mptcp_lib_check_mptcp
+mptcp_lib_check_kallsyms
 
 ip -Version > /dev/null 2>&1
 if [ $? -ne 0 ];then
@@ -695,6 +696,15 @@ run_test_transparent()
 		return 0
 	fi
 
+	# IP(V6)_TRANSPARENT has been added after TOS support which came with
+	# the required infrastructure in MPTCP sockopt code. To support TOS, the
+	# following function has been exported (T). Not great but better than
+	# checking for a specific kernel version.
+	if ! mptcp_lib_kallsyms_has "T __ip_sock_set_tos$"; then
+		echo "INFO: ${msg} not supported by the kernel: SKIP"
+		return
+	fi
+
 ip netns exec "$listener_ns" nft -f /dev/stdin <<"EOF"
 flush ruleset
 table inet mangle {
@@ -767,6 +777,11 @@ run_tests_peekmode()
 
 run_tests_mptfo()
 {
+	if ! mptcp_lib_kallsyms_has "mptcp_fastopen_"; then
+		echo "INFO: TFO not supported by the kernel: SKIP"
+		return
+	fi
+
 	echo "INFO: with MPTFO start"
 	ip netns exec "$ns1" sysctl -q net.ipv4.tcp_fastopen=2
 	ip netns exec "$ns2" sysctl -q net.ipv4.tcp_fastopen=1
@@ -787,6 +802,11 @@ run_tests_disconnect()
 	local old_cin=$cin
 	local old_sin=$sin
 
+	if ! mptcp_lib_kallsyms_has "mptcp_pm_data_reset$"; then
+		echo "INFO: Full disconnect not supported: SKIP"
+		return
+	fi
+
 	cat $cin $cin $cin > "$cin".disconnect
 
 	# force do_transfer to cope with the multiple tranmissions
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 85474e029784..1b68fe1c0885 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -25,6 +25,8 @@ capout=""
 ns1=""
 ns2=""
 ksft_skip=4
+iptables="iptables"
+ip6tables="ip6tables"
 timeout_poll=30
 timeout_test=$((timeout_poll * 2 + 1))
 capture=0
@@ -83,7 +85,7 @@ init_partial()
 		ip netns add $netns || exit $ksft_skip
 		ip -net $netns link set lo up
 		ip netns exec $netns sysctl -q net.mptcp.enabled=1
-		ip netns exec $netns sysctl -q net.mptcp.pm_type=0
+		ip netns exec $netns sysctl -q net.mptcp.pm_type=0 2>/dev/null || true
 		ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0
 		ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0
 		if [ $checksum -eq 1 ]; then
@@ -142,13 +144,18 @@ cleanup_partial()
 check_tools()
 {
 	mptcp_lib_check_mptcp
+	mptcp_lib_check_kallsyms
 
 	if ! ip -Version &> /dev/null; then
 		echo "SKIP: Could not run test without ip tool"
 		exit $ksft_skip
 	fi
 
-	if ! iptables -V &> /dev/null; then
+	# Use the legacy version if available to support old kernel versions
+	if iptables-legacy -V &> /dev/null; then
+		iptables="iptables-legacy"
+		ip6tables="ip6tables-legacy"
+	elif ! iptables -V &> /dev/null; then
 		echo "SKIP: Could not run all tests without iptables tool"
 		exit $ksft_skip
 	fi
@@ -187,6 +194,32 @@ cleanup()
 	cleanup_partial
 }
 
+# $1: msg
+print_title()
+{
+	printf "%03u %-36s %s" "${TEST_COUNT}" "${TEST_NAME}" "${1}"
+}
+
+# [ $1: fail msg ]
+mark_as_skipped()
+{
+	local msg="${1:-"Feature not supported"}"
+
+	mptcp_lib_fail_if_expected_feature "${msg}"
+
+	print_title "[ skip ] ${msg}"
+	printf "\n"
+}
+
+# $@: condition
+continue_if()
+{
+	if ! "${@}"; then
+		mark_as_skipped
+		return 1
+	fi
+}
+
 skip_test()
 {
 	if [ "${#only_tests_ids[@]}" -eq 0 ] && [ "${#only_tests_names[@]}" -eq 0 ]; then
@@ -230,6 +263,19 @@ reset()
 	return 0
 }
 
+# $1: test name ; $2: counter to check
+reset_check_counter()
+{
+	reset "${1}" || return 1
+
+	local counter="${2}"
+
+	if ! nstat -asz "${counter}" | grep -wq "${counter}"; then
+		mark_as_skipped "counter '${counter}' is not available"
+		return 1
+	fi
+}
+
 # $1: test name
 reset_with_cookies()
 {
@@ -249,17 +295,21 @@ reset_with_add_addr_timeout()
 
 	reset "${1}" || return 1
 
-	tables="iptables"
+	tables="${iptables}"
 	if [ $ip -eq 6 ]; then
-		tables="ip6tables"
+		tables="${ip6tables}"
 	fi
 
 	ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
-	ip netns exec $ns2 $tables -A OUTPUT -p tcp \
-		-m tcp --tcp-option 30 \
-		-m bpf --bytecode \
-		"$CBPF_MPTCP_SUBOPTION_ADD_ADDR" \
-		-j DROP
+
+	if ! ip netns exec $ns2 $tables -A OUTPUT -p tcp \
+			-m tcp --tcp-option 30 \
+			-m bpf --bytecode \
+			"$CBPF_MPTCP_SUBOPTION_ADD_ADDR" \
+			-j DROP; then
+		mark_as_skipped "unable to set the 'add addr' rule"
+		return 1
+	fi
 }
 
 # $1: test name
@@ -303,22 +353,17 @@ reset_with_allow_join_id0()
 #     tc action pedit offset 162 out of bounds
 #
 # Netfilter is used to mark packets with enough data.
-reset_with_fail()
+setup_fail_rules()
 {
-	reset "${1}" || return 1
-
-	ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1
-	ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=1
-
 	check_invert=1
 	validate_checksum=1
-	local i="$2"
-	local ip="${3:-4}"
+	local i="$1"
+	local ip="${2:-4}"
 	local tables
 
-	tables="iptables"
+	tables="${iptables}"
 	if [ $ip -eq 6 ]; then
-		tables="ip6tables"
+		tables="${ip6tables}"
 	fi
 
 	ip netns exec $ns2 $tables \
@@ -328,15 +373,32 @@ reset_with_fail()
 		-p tcp \
 		-m length --length 150:9999 \
 		-m statistic --mode nth --packet 1 --every 99999 \
-		-j MARK --set-mark 42 || exit 1
+		-j MARK --set-mark 42 || return ${ksft_skip}
 
-	tc -n $ns2 qdisc add dev ns2eth$i clsact || exit 1
+	tc -n $ns2 qdisc add dev ns2eth$i clsact || return ${ksft_skip}
 	tc -n $ns2 filter add dev ns2eth$i egress \
 		protocol ip prio 1000 \
 		handle 42 fw \
 		action pedit munge offset 148 u8 invert \
 		pipe csum tcp \
-		index 100 || exit 1
+		index 100 || return ${ksft_skip}
+}
+
+reset_with_fail()
+{
+	reset_check_counter "${1}" "MPTcpExtInfiniteMapTx" || return 1
+	shift
+
+	ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1
+	ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=1
+
+	local rc=0
+	setup_fail_rules "${@}" || rc=$?
+
+	if [ ${rc} -eq ${ksft_skip} ]; then
+		mark_as_skipped "unable to set the 'fail' rules"
+		return 1
+	fi
 }
 
 reset_with_events()
@@ -351,6 +413,25 @@ reset_with_events()
 	evts_ns2_pid=$!
 }
 
+reset_with_tcp_filter()
+{
+	reset "${1}" || return 1
+	shift
+
+	local ns="${!1}"
+	local src="${2}"
+	local target="${3}"
+
+	if ! ip netns exec "${ns}" ${iptables} \
+			-A INPUT \
+			-s "${src}" \
+			-p tcp \
+			-j "${target}"; then
+		mark_as_skipped "unable to set the filter rules"
+		return 1
+	fi
+}
+
 fail_test()
 {
 	ret=1
@@ -472,11 +553,25 @@ wait_local_port_listen()
 	done
 }
 
-rm_addr_count()
+# $1: ns ; $2: counter
+get_counter()
 {
-	local ns=${1}
+	local ns="${1}"
+	local counter="${2}"
+	local count
 
-	ip netns exec ${ns} nstat -as | grep MPTcpExtRmAddr | awk '{print $2}'
+	count=$(ip netns exec ${ns} nstat -asz "${counter}" | awk 'NR==1 {next} {print $2}')
+	if [ -z "${count}" ]; then
+		mptcp_lib_fail_if_expected_feature "${counter} counter"
+		return 1
+	fi
+
+	echo "${count}"
+}
+
+rm_addr_count()
+{
+	get_counter "${1}" "MPTcpExtRmAddr"
 }
 
 # $1: ns, $2: old rm_addr counter in $ns
@@ -499,11 +594,11 @@ wait_mpj()
 	local ns="${1}"
 	local cnt old_cnt
 
-	old_cnt=$(ip netns exec ${ns} nstat -as | grep MPJoinAckRx | awk '{print $2}')
+	old_cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx")
 
 	local i
 	for i in $(seq 10); do
-		cnt=$(ip netns exec ${ns} nstat -as | grep MPJoinAckRx | awk '{print $2}')
+		cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx")
 		[ "$cnt" = "${old_cnt}" ] || break
 		sleep 0.1
 	done
@@ -703,15 +798,6 @@ pm_nl_check_endpoint()
 	fi
 }
 
-filter_tcp_from()
-{
-	local ns="${1}"
-	local src="${2}"
-	local target="${3}"
-
-	ip netns exec "${ns}" iptables -A INPUT -s "${src}" -p tcp -j "${target}"
-}
-
 do_transfer()
 {
 	local listener_ns="$1"
@@ -1161,12 +1247,13 @@ chk_csum_nr()
 	fi
 
 	printf "%-${nr_blank}s %s" " " "sum"
-	count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtDataCsumErr | awk '{print $2}')
-	[ -z "$count" ] && count=0
+	count=$(get_counter ${ns1} "MPTcpExtDataCsumErr")
 	if [ "$count" != "$csum_ns1" ]; then
 		extra_msg="$extra_msg ns1=$count"
 	fi
-	if { [ "$count" != $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 0 ]; } ||
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif { [ "$count" != $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 0 ]; } ||
 	   { [ "$count" -lt $csum_ns1 ] && [ $allow_multi_errors_ns1 -eq 1 ]; }; then
 		echo "[fail] got $count data checksum error[s] expected $csum_ns1"
 		fail_test
@@ -1174,12 +1261,13 @@ chk_csum_nr()
 		echo -n "[ ok ]"
 	fi
 	echo -n " - csum  "
-	count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtDataCsumErr | awk '{print $2}')
-	[ -z "$count" ] && count=0
+	count=$(get_counter ${ns2} "MPTcpExtDataCsumErr")
 	if [ "$count" != "$csum_ns2" ]; then
 		extra_msg="$extra_msg ns2=$count"
 	fi
-	if { [ "$count" != $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 0 ]; } ||
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif { [ "$count" != $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 0 ]; } ||
 	   { [ "$count" -lt $csum_ns2 ] && [ $allow_multi_errors_ns2 -eq 1 ]; }; then
 		echo "[fail] got $count data checksum error[s] expected $csum_ns2"
 		fail_test
@@ -1218,12 +1306,13 @@ chk_fail_nr()
 	fi
 
 	printf "%-${nr_blank}s %s" " " "ftx"
-	count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFailTx | awk '{print $2}')
-	[ -z "$count" ] && count=0
+	count=$(get_counter ${ns_tx} "MPTcpExtMPFailTx")
 	if [ "$count" != "$fail_tx" ]; then
 		extra_msg="$extra_msg,tx=$count"
 	fi
-	if { [ "$count" != "$fail_tx" ] && [ $allow_tx_lost -eq 0 ]; } ||
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif { [ "$count" != "$fail_tx" ] && [ $allow_tx_lost -eq 0 ]; } ||
 	   { [ "$count" -gt "$fail_tx" ] && [ $allow_tx_lost -eq 1 ]; }; then
 		echo "[fail] got $count MP_FAIL[s] TX expected $fail_tx"
 		fail_test
@@ -1232,12 +1321,13 @@ chk_fail_nr()
 	fi
 
 	echo -n " - failrx"
-	count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFailRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
+	count=$(get_counter ${ns_rx} "MPTcpExtMPFailRx")
 	if [ "$count" != "$fail_rx" ]; then
 		extra_msg="$extra_msg,rx=$count"
 	fi
-	if { [ "$count" != "$fail_rx" ] && [ $allow_rx_lost -eq 0 ]; } ||
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif { [ "$count" != "$fail_rx" ] && [ $allow_rx_lost -eq 0 ]; } ||
 	   { [ "$count" -gt "$fail_rx" ] && [ $allow_rx_lost -eq 1 ]; }; then
 		echo "[fail] got $count MP_FAIL[s] RX expected $fail_rx"
 		fail_test
@@ -1265,10 +1355,11 @@ chk_fclose_nr()
 	fi
 
 	printf "%-${nr_blank}s %s" " " "ctx"
-	count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPFastcloseTx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	[ "$count" != "$fclose_tx" ] && extra_msg="$extra_msg,tx=$count"
-	if [ "$count" != "$fclose_tx" ]; then
+	count=$(get_counter ${ns_tx} "MPTcpExtMPFastcloseTx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$fclose_tx" ]; then
+		extra_msg="$extra_msg,tx=$count"
 		echo "[fail] got $count MP_FASTCLOSE[s] TX expected $fclose_tx"
 		fail_test
 	else
@@ -1276,10 +1367,11 @@ chk_fclose_nr()
 	fi
 
 	echo -n " - fclzrx"
-	count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPFastcloseRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	[ "$count" != "$fclose_rx" ] && extra_msg="$extra_msg,rx=$count"
-	if [ "$count" != "$fclose_rx" ]; then
+	count=$(get_counter ${ns_rx} "MPTcpExtMPFastcloseRx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$fclose_rx" ]; then
+		extra_msg="$extra_msg,rx=$count"
 		echo "[fail] got $count MP_FASTCLOSE[s] RX expected $fclose_rx"
 		fail_test
 	else
@@ -1306,9 +1398,10 @@ chk_rst_nr()
 	fi
 
 	printf "%-${nr_blank}s %s" " " "rtx"
-	count=$(ip netns exec $ns_tx nstat -as | grep MPTcpExtMPRstTx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ $count -lt $rst_tx ]; then
+	count=$(get_counter ${ns_tx} "MPTcpExtMPRstTx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ $count -lt $rst_tx ]; then
 		echo "[fail] got $count MP_RST[s] TX expected $rst_tx"
 		fail_test
 	else
@@ -1316,9 +1409,10 @@ chk_rst_nr()
 	fi
 
 	echo -n " - rstrx "
-	count=$(ip netns exec $ns_rx nstat -as | grep MPTcpExtMPRstRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" -lt "$rst_rx" ]; then
+	count=$(get_counter ${ns_rx} "MPTcpExtMPRstRx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" -lt "$rst_rx" ]; then
 		echo "[fail] got $count MP_RST[s] RX expected $rst_rx"
 		fail_test
 	else
@@ -1335,9 +1429,10 @@ chk_infi_nr()
 	local count
 
 	printf "%-${nr_blank}s %s" " " "itx"
-	count=$(ip netns exec $ns2 nstat -as | grep InfiniteMapTx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$infi_tx" ]; then
+	count=$(get_counter ${ns2} "MPTcpExtInfiniteMapTx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$infi_tx" ]; then
 		echo "[fail] got $count infinite map[s] TX expected $infi_tx"
 		fail_test
 	else
@@ -1345,9 +1440,10 @@ chk_infi_nr()
 	fi
 
 	echo -n " - infirx"
-	count=$(ip netns exec $ns1 nstat -as | grep InfiniteMapRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$infi_rx" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtInfiniteMapRx")
+	if [ -z "$count" ]; then
+		echo "[skip]"
+	elif [ "$count" != "$infi_rx" ]; then
 		echo "[fail] got $count infinite map[s] RX expected $infi_rx"
 		fail_test
 	else
@@ -1375,9 +1471,10 @@ chk_join_nr()
 	fi
 
 	printf "%03u %-36s %s" "${TEST_COUNT}" "${title}" "syn"
-	count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$syn_nr" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtMPJoinSynRx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$syn_nr" ]; then
 		echo "[fail] got $count JOIN[s] syn expected $syn_nr"
 		fail_test
 	else
@@ -1386,9 +1483,10 @@ chk_join_nr()
 
 	echo -n " - synack"
 	with_cookie=$(ip netns exec $ns2 sysctl -n net.ipv4.tcp_syncookies)
-	count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinSynAckRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$syn_ack_nr" ]; then
+	count=$(get_counter ${ns2} "MPTcpExtMPJoinSynAckRx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$syn_ack_nr" ]; then
 		# simult connections exceeding the limit with cookie enabled could go up to
 		# synack validation as the conn limit can be enforced reliably only after
 		# the subflow creation
@@ -1403,9 +1501,10 @@ chk_join_nr()
 	fi
 
 	echo -n " - ack"
-	count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinAckRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$ack_nr" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtMPJoinAckRx")
+	if [ -z "$count" ]; then
+		echo "[skip]"
+	elif [ "$count" != "$ack_nr" ]; then
 		echo "[fail] got $count JOIN[s] ack expected $ack_nr"
 		fail_test
 	else
@@ -1435,12 +1534,12 @@ chk_stale_nr()
 	local recover_nr
 
 	printf "%-${nr_blank}s %-18s" " " "stale"
-	stale_nr=$(ip netns exec $ns nstat -as | grep MPTcpExtSubflowStale | awk '{print $2}')
-	[ -z "$stale_nr" ] && stale_nr=0
-	recover_nr=$(ip netns exec $ns nstat -as | grep MPTcpExtSubflowRecover | awk '{print $2}')
-	[ -z "$recover_nr" ] && recover_nr=0
 
-	if [ $stale_nr -lt $stale_min ] ||
+	stale_nr=$(get_counter ${ns} "MPTcpExtSubflowStale")
+	recover_nr=$(get_counter ${ns} "MPTcpExtSubflowRecover")
+	if [ -z "$stale_nr" ] || [ -z "$recover_nr" ]; then
+		echo "[skip]"
+	elif [ $stale_nr -lt $stale_min ] ||
 	   { [ $stale_max -gt 0 ] && [ $stale_nr -gt $stale_max ]; } ||
 	   [ $((stale_nr - recover_nr)) -ne $stale_delta ]; then
 		echo "[fail] got $stale_nr stale[s] $recover_nr recover[s], " \
@@ -1475,12 +1574,12 @@ chk_add_nr()
 	timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout)
 
 	printf "%-${nr_blank}s %s" " " "add"
-	count=$(ip netns exec $ns2 nstat -as MPTcpExtAddAddr | grep MPTcpExtAddAddr | awk '{print $2}')
-	[ -z "$count" ] && count=0
-
+	count=$(get_counter ${ns2} "MPTcpExtAddAddr")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
 	# if the test configured a short timeout tolerate greater then expected
 	# add addrs options, due to retransmissions
-	if [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then
+	elif [ "$count" != "$add_nr" ] && { [ "$timeout" -gt 1 ] || [ "$count" -lt "$add_nr" ]; }; then
 		echo "[fail] got $count ADD_ADDR[s] expected $add_nr"
 		fail_test
 	else
@@ -1488,9 +1587,10 @@ chk_add_nr()
 	fi
 
 	echo -n " - echo  "
-	count=$(ip netns exec $ns1 nstat -as MPTcpExtEchoAdd | grep MPTcpExtEchoAdd | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$echo_nr" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtEchoAdd")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$echo_nr" ]; then
 		echo "[fail] got $count ADD_ADDR echo[s] expected $echo_nr"
 		fail_test
 	else
@@ -1499,9 +1599,10 @@ chk_add_nr()
 
 	if [ $port_nr -gt 0 ]; then
 		echo -n " - pt "
-		count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtPortAdd | awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$port_nr" ]; then
+		count=$(get_counter ${ns2} "MPTcpExtPortAdd")
+		if [ -z "$count" ]; then
+			echo "[skip]"
+		elif [ "$count" != "$port_nr" ]; then
 			echo "[fail] got $count ADD_ADDR[s] with a port-number expected $port_nr"
 			fail_test
 		else
@@ -1509,10 +1610,10 @@ chk_add_nr()
 		fi
 
 		printf "%-${nr_blank}s %s" " " "syn"
-		count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortSynRx |
-			awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$syn_nr" ]; then
+		count=$(get_counter ${ns1} "MPTcpExtMPJoinPortSynRx")
+		if [ -z "$count" ]; then
+			echo -n "[skip]"
+		elif [ "$count" != "$syn_nr" ]; then
 			echo "[fail] got $count JOIN[s] syn with a different \
 				port-number expected $syn_nr"
 			fail_test
@@ -1521,10 +1622,10 @@ chk_add_nr()
 		fi
 
 		echo -n " - synack"
-		count=$(ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinPortSynAckRx |
-			awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$syn_ack_nr" ]; then
+		count=$(get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx")
+		if [ -z "$count" ]; then
+			echo -n "[skip]"
+		elif [ "$count" != "$syn_ack_nr" ]; then
 			echo "[fail] got $count JOIN[s] synack with a different \
 				port-number expected $syn_ack_nr"
 			fail_test
@@ -1533,10 +1634,10 @@ chk_add_nr()
 		fi
 
 		echo -n " - ack"
-		count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortAckRx |
-			awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$ack_nr" ]; then
+		count=$(get_counter ${ns1} "MPTcpExtMPJoinPortAckRx")
+		if [ -z "$count" ]; then
+			echo "[skip]"
+		elif [ "$count" != "$ack_nr" ]; then
 			echo "[fail] got $count JOIN[s] ack with a different \
 				port-number expected $ack_nr"
 			fail_test
@@ -1545,10 +1646,10 @@ chk_add_nr()
 		fi
 
 		printf "%-${nr_blank}s %s" " " "syn"
-		count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortSynRx |
-			awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$mis_syn_nr" ]; then
+		count=$(get_counter ${ns1} "MPTcpExtMismatchPortSynRx")
+		if [ -z "$count" ]; then
+			echo -n "[skip]"
+		elif [ "$count" != "$mis_syn_nr" ]; then
 			echo "[fail] got $count JOIN[s] syn with a mismatched \
 				port-number expected $mis_syn_nr"
 			fail_test
@@ -1557,10 +1658,10 @@ chk_add_nr()
 		fi
 
 		echo -n " - ack   "
-		count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortAckRx |
-			awk '{print $2}')
-		[ -z "$count" ] && count=0
-		if [ "$count" != "$mis_ack_nr" ]; then
+		count=$(get_counter ${ns1} "MPTcpExtMismatchPortAckRx")
+		if [ -z "$count" ]; then
+			echo "[skip]"
+		elif [ "$count" != "$mis_ack_nr" ]; then
 			echo "[fail] got $count JOIN[s] ack with a mismatched \
 				port-number expected $mis_ack_nr"
 			fail_test
@@ -1643,28 +1744,26 @@ chk_rm_nr()
 	fi
 
 	echo -n " - rmsf  "
-	count=$(ip netns exec $subflow_ns nstat -as | grep MPTcpExtRmSubflow | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ -n "$simult" ]; then
+	count=$(get_counter ${subflow_ns} "MPTcpExtRmSubflow")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ -n "$simult" ]; then
 		local cnt suffix
 
-		cnt=$(ip netns exec $addr_ns nstat -as | grep MPTcpExtRmSubflow | awk '{print $2}')
+		cnt=$(get_counter ${addr_ns} "MPTcpExtRmSubflow")
 
 		# in case of simult flush, the subflow removal count on each side is
 		# unreliable
-		[ -z "$cnt" ] && cnt=0
 		count=$((count + cnt))
 		[ "$count" != "$rm_subflow_nr" ] && suffix="$count in [$rm_subflow_nr:$((rm_subflow_nr*2))]"
 		if [ $count -ge "$rm_subflow_nr" ] && \
 		   [ "$count" -le "$((rm_subflow_nr *2 ))" ]; then
-			echo "[ ok ] $suffix"
+			echo -n "[ ok ] $suffix"
 		else
 			echo "[fail] got $count RM_SUBFLOW[s] expected in range [$rm_subflow_nr:$((rm_subflow_nr*2))]"
 			fail_test
 		fi
-		return
-	fi
-	if [ "$count" != "$rm_subflow_nr" ]; then
+	elif [ "$count" != "$rm_subflow_nr" ]; then
 		echo "[fail] got $count RM_SUBFLOW[s] expected $rm_subflow_nr"
 		fail_test
 	else
@@ -1698,9 +1797,10 @@ chk_prio_nr()
 	local count
 
 	printf "%-${nr_blank}s %s" " " "ptx"
-	count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$mp_prio_nr_tx" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtMPPrioTx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$mp_prio_nr_tx" ]; then
 		echo "[fail] got $count MP_PRIO[s] TX expected $mp_prio_nr_tx"
 		fail_test
 	else
@@ -1708,9 +1808,10 @@ chk_prio_nr()
 	fi
 
 	echo -n " - prx   "
-	count=$(ip netns exec $ns1 nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}')
-	[ -z "$count" ] && count=0
-	if [ "$count" != "$mp_prio_nr_rx" ]; then
+	count=$(get_counter ${ns1} "MPTcpExtMPPrioRx")
+	if [ -z "$count" ]; then
+		echo "[skip]"
+	elif [ "$count" != "$mp_prio_nr_rx" ]; then
 		echo "[fail] got $count MP_PRIO[s] RX expected $mp_prio_nr_rx"
 		fail_test
 	else
@@ -1821,7 +1922,7 @@ wait_attempt_fail()
 	while [ $time -lt $timeout_ms ]; do
 		local cnt
 
-		cnt=$(ip netns exec $ns nstat -as TcpAttemptFails | grep TcpAttemptFails | awk '{print $2}')
+		cnt=$(get_counter ${ns} "TcpAttemptFails")
 
 		[ "$cnt" = 1 ] && return 1
 		time=$((time + 100))
@@ -1914,23 +2015,23 @@ subflows_error_tests()
 	fi
 
 	# multiple subflows, with subflow creation error
-	if reset "multi subflows, with failing subflow"; then
+	if reset_with_tcp_filter "multi subflows, with failing subflow" ns1 10.0.3.2 REJECT &&
+	   continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 0 2
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-		filter_tcp_from $ns1 10.0.3.2 REJECT
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
 		chk_join_nr 1 1 1
 	fi
 
 	# multiple subflows, with subflow timeout on MPJ
-	if reset "multi subflows, with subflow timeout"; then
+	if reset_with_tcp_filter "multi subflows, with subflow timeout" ns1 10.0.3.2 DROP &&
+	   continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 0 2
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-		filter_tcp_from $ns1 10.0.3.2 DROP
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
 		chk_join_nr 1 1 1
 	fi
@@ -1938,11 +2039,11 @@ subflows_error_tests()
 	# multiple subflows, check that the endpoint corresponding to
 	# closed subflow (due to reset) is not reused if additional
 	# subflows are added later
-	if reset "multi subflows, fair usage on close"; then
+	if reset_with_tcp_filter "multi subflows, fair usage on close" ns1 10.0.3.2 REJECT &&
+	   continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		filter_tcp_from $ns1 10.0.3.2 REJECT
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
 
 		# mpj subflow will be in TW after the reset
@@ -2043,11 +2144,18 @@ signal_address_tests()
 		# the peer could possibly miss some addr notification, allow retransmission
 		ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
-		chk_join_nr 3 3 3
 
-		# the server will not signal the address terminating
-		# the MPC subflow
-		chk_add_nr 3 3
+		# It is not directly linked to the commit introducing this
+		# symbol but for the parent one which is linked anyway.
+		if ! mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
+			chk_join_nr 3 3 2
+			chk_add_nr 4 4
+		else
+			chk_join_nr 3 3 3
+			# the server will not signal the address terminating
+			# the MPC subflow
+			chk_add_nr 3 3
+		fi
 	fi
 }
 
@@ -2290,8 +2398,13 @@ remove_tests()
 		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
 		run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
 		chk_join_nr 3 3 3
-		chk_rm_tx_nr 0
-		chk_rm_nr 0 3 simult
+
+		if mptcp_lib_kversion_ge 5.18; then
+			chk_rm_tx_nr 0
+			chk_rm_nr 0 3 simult
+		else
+			chk_rm_nr 3 3
+		fi
 	fi
 
 	# addresses flush
@@ -2529,7 +2642,8 @@ v4mapped_tests()
 
 mixed_tests()
 {
-	if reset "IPv4 sockets do not use IPv6 addresses"; then
+	if reset "IPv4 sockets do not use IPv6 addresses" &&
+	   continue_if mptcp_lib_kversion_ge 6.3; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
@@ -2538,7 +2652,8 @@ mixed_tests()
 	fi
 
 	# Need an IPv6 mptcp socket to allow subflows of both families
-	if reset "simult IPv4 and IPv6 subflows"; then
+	if reset "simult IPv4 and IPv6 subflows" &&
+	   continue_if mptcp_lib_kversion_ge 6.3; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
@@ -2547,7 +2662,8 @@ mixed_tests()
 	fi
 
 	# cross families subflows will not be created even in fullmesh mode
-	if reset "simult IPv4 and IPv6 subflows, fullmesh 1x1"; then
+	if reset "simult IPv4 and IPv6 subflows, fullmesh 1x1" &&
+	   continue_if mptcp_lib_kversion_ge 6.3; then
 		pm_nl_set_limits $ns1 0 4
 		pm_nl_set_limits $ns2 1 4
 		pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow,fullmesh
@@ -2558,7 +2674,8 @@ mixed_tests()
 
 	# fullmesh still tries to create all the possibly subflows with
 	# matching family
-	if reset "simult IPv4 and IPv6 subflows, fullmesh 2x2"; then
+	if reset "simult IPv4 and IPv6 subflows, fullmesh 2x2" &&
+	   continue_if mptcp_lib_kversion_ge 6.3; then
 		pm_nl_set_limits $ns1 0 4
 		pm_nl_set_limits $ns2 2 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
@@ -2571,7 +2688,8 @@ mixed_tests()
 backup_tests()
 {
 	# single subflow, backup
-	if reset "single subflow, backup"; then
+	if reset "single subflow, backup" &&
+	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
@@ -2581,7 +2699,8 @@ backup_tests()
 	fi
 
 	# single address, backup
-	if reset "single address, backup"; then
+	if reset "single address, backup" &&
+	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		pm_nl_set_limits $ns2 1 1
@@ -2592,7 +2711,8 @@ backup_tests()
 	fi
 
 	# single address with port, backup
-	if reset "single address with port, backup"; then
+	if reset "single address with port, backup" &&
+	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
 		pm_nl_set_limits $ns2 1 1
@@ -2602,14 +2722,16 @@ backup_tests()
 		chk_prio_nr 1 1
 	fi
 
-	if reset "mpc backup"; then
+	if reset "mpc backup" &&
+	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
 		chk_join_nr 0 0 0
 		chk_prio_nr 0 1
 	fi
 
-	if reset "mpc backup both sides"; then
+	if reset "mpc backup both sides" &&
+	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
@@ -2617,14 +2739,16 @@ backup_tests()
 		chk_prio_nr 1 1
 	fi
 
-	if reset "mpc switch to backup"; then
+	if reset "mpc switch to backup" &&
+	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
 		chk_join_nr 0 0 0
 		chk_prio_nr 0 1
 	fi
 
-	if reset "mpc switch to backup both sides"; then
+	if reset "mpc switch to backup both sides" &&
+	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
 		run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow backup
@@ -2650,38 +2774,41 @@ verify_listener_events()
 	local family
 	local saddr
 	local sport
+	local name
 
 	if [ $e_type = $LISTENER_CREATED ]; then
-		stdbuf -o0 -e0 printf "\t\t\t\t\t CREATE_LISTENER %s:%s"\
-			$e_saddr $e_sport
+		name="LISTENER_CREATED"
 	elif [ $e_type = $LISTENER_CLOSED ]; then
-		stdbuf -o0 -e0 printf "\t\t\t\t\t CLOSE_LISTENER %s:%s "\
-			$e_saddr $e_sport
+		name="LISTENER_CLOSED"
+	else
+		name="$e_type"
+	fi
+
+	printf "%-${nr_blank}s %s %s:%s " " " "$name" "$e_saddr" "$e_sport"
+
+	if ! mptcp_lib_kallsyms_has "mptcp_event_pm_listener$"; then
+		printf "[skip]: event not supported\n"
+		return
 	fi
 
-	type=$(grep "type:$e_type," $evt |
-	       sed --unbuffered -n 's/.*\(type:\)\([[:digit:]]*\).*$/\2/p;q')
-	family=$(grep "type:$e_type," $evt |
-		 sed --unbuffered -n 's/.*\(family:\)\([[:digit:]]*\).*$/\2/p;q')
-	sport=$(grep "type:$e_type," $evt |
-		sed --unbuffered -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q')
+	type=$(grep "type:$e_type," $evt | sed -n 's/.*\(type:\)\([[:digit:]]*\).*$/\2/p;q')
+	family=$(grep "type:$e_type," $evt | sed -n 's/.*\(family:\)\([[:digit:]]*\).*$/\2/p;q')
+	sport=$(grep "type:$e_type," $evt | sed -n 's/.*\(sport:\)\([[:digit:]]*\).*$/\2/p;q')
 	if [ $family ] && [ $family = $AF_INET6 ]; then
-		saddr=$(grep "type:$e_type," $evt |
-			sed --unbuffered -n 's/.*\(saddr6:\)\([0-9a-f:.]*\).*$/\2/p;q')
+		saddr=$(grep "type:$e_type," $evt | sed -n 's/.*\(saddr6:\)\([0-9a-f:.]*\).*$/\2/p;q')
 	else
-		saddr=$(grep "type:$e_type," $evt |
-			sed --unbuffered -n 's/.*\(saddr4:\)\([0-9.]*\).*$/\2/p;q')
+		saddr=$(grep "type:$e_type," $evt | sed -n 's/.*\(saddr4:\)\([0-9.]*\).*$/\2/p;q')
 	fi
 
 	if [ $type ] && [ $type = $e_type ] &&
 	   [ $family ] && [ $family = $e_family ] &&
 	   [ $saddr ] && [ $saddr = $e_saddr ] &&
 	   [ $sport ] && [ $sport = $e_sport ]; then
-		stdbuf -o0 -e0 printf "[ ok ]\n"
+		echo "[ ok ]"
 		return 0
 	fi
 	fail_test
-	stdbuf -o0 -e0 printf "[fail]\n"
+	echo "[fail]"
 }
 
 add_addr_ports_tests()
@@ -2987,7 +3114,8 @@ fullmesh_tests()
 	fi
 
 	# set fullmesh flag
-	if reset "set fullmesh flag test"; then
+	if reset "set fullmesh flag test" &&
+	   continue_if mptcp_lib_kversion_ge 5.18; then
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
 		pm_nl_set_limits $ns2 4 4
@@ -2997,7 +3125,8 @@ fullmesh_tests()
 	fi
 
 	# set nofullmesh flag
-	if reset "set nofullmesh flag test"; then
+	if reset "set nofullmesh flag test" &&
+	   continue_if mptcp_lib_kversion_ge 5.18; then
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh
 		pm_nl_set_limits $ns2 4 4
@@ -3007,7 +3136,8 @@ fullmesh_tests()
 	fi
 
 	# set backup,fullmesh flags
-	if reset "set backup,fullmesh flags test"; then
+	if reset "set backup,fullmesh flags test" &&
+	   continue_if mptcp_lib_kversion_ge 5.18; then
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
 		pm_nl_set_limits $ns2 4 4
@@ -3018,7 +3148,8 @@ fullmesh_tests()
 	fi
 
 	# set nobackup,nofullmesh flags
-	if reset "set nobackup,nofullmesh flags test"; then
+	if reset "set nobackup,nofullmesh flags test" &&
+	   continue_if mptcp_lib_kversion_ge 5.18; then
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_set_limits $ns2 4 4
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh
@@ -3031,14 +3162,14 @@ fullmesh_tests()
 
 fastclose_tests()
 {
-	if reset "fastclose test"; then
+	if reset_check_counter "fastclose test" "MPTcpExtMPFastcloseTx"; then
 		run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_client
 		chk_join_nr 0 0 0
 		chk_fclose_nr 1 1
 		chk_rst_nr 1 1 invert
 	fi
 
-	if reset "fastclose server test"; then
+	if reset_check_counter "fastclose server test" "MPTcpExtMPFastcloseRx"; then
 		run_tests $ns1 $ns2 10.0.1.1 1024 0 fastclose_server
 		chk_join_nr 0 0 0
 		chk_fclose_nr 1 1 invert
@@ -3076,7 +3207,8 @@ fail_tests()
 userspace_tests()
 {
 	# userspace pm type prevents add_addr
-	if reset "userspace pm type prevents add_addr"; then
+	if reset "userspace pm type prevents add_addr" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns1
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 0 2
@@ -3087,7 +3219,8 @@ userspace_tests()
 	fi
 
 	# userspace pm type does not echo add_addr without daemon
-	if reset "userspace pm no echo w/o daemon"; then
+	if reset "userspace pm no echo w/o daemon" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns2
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 0 2
@@ -3098,7 +3231,8 @@ userspace_tests()
 	fi
 
 	# userspace pm type rejects join
-	if reset "userspace pm type rejects join"; then
+	if reset "userspace pm type rejects join" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns1
 		pm_nl_set_limits $ns1 1 1
 		pm_nl_set_limits $ns2 1 1
@@ -3108,7 +3242,8 @@ userspace_tests()
 	fi
 
 	# userspace pm type does not send join
-	if reset "userspace pm type does not send join"; then
+	if reset "userspace pm type does not send join" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns2
 		pm_nl_set_limits $ns1 1 1
 		pm_nl_set_limits $ns2 1 1
@@ -3118,7 +3253,8 @@ userspace_tests()
 	fi
 
 	# userspace pm type prevents mp_prio
-	if reset "userspace pm type prevents mp_prio"; then
+	if reset "userspace pm type prevents mp_prio" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns1
 		pm_nl_set_limits $ns1 1 1
 		pm_nl_set_limits $ns2 1 1
@@ -3129,7 +3265,8 @@ userspace_tests()
 	fi
 
 	# userspace pm type prevents rm_addr
-	if reset "userspace pm type prevents rm_addr"; then
+	if reset "userspace pm type prevents rm_addr" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns1
 		set_userspace_pm $ns2
 		pm_nl_set_limits $ns1 0 1
@@ -3141,7 +3278,8 @@ userspace_tests()
 	fi
 
 	# userspace pm add & remove address
-	if reset_with_events "userspace pm add & remove address"; then
+	if reset_with_events "userspace pm add & remove address" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns1
 		pm_nl_set_limits $ns2 1 1
 		run_tests $ns1 $ns2 10.0.1.1 0 userspace_1 0 slow
@@ -3152,7 +3290,8 @@ userspace_tests()
 	fi
 
 	# userspace pm create destroy subflow
-	if reset_with_events "userspace pm create destroy subflow"; then
+	if reset_with_events "userspace pm create destroy subflow" &&
+	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns2
 		pm_nl_set_limits $ns1 0 1
 		run_tests $ns1 $ns2 10.0.1.1 0 0 userspace_1 slow
@@ -3164,8 +3303,10 @@ userspace_tests()
 
 endpoint_tests()
 {
+	# subflow_rebuild_header is needed to support the implicit flag
 	# userspace pm type prevents add_addr
-	if reset "implicit EP"; then
+	if reset "implicit EP" &&
+	   mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 2 2
 		pm_nl_set_limits $ns2 2 2
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
@@ -3185,7 +3326,8 @@ endpoint_tests()
 		kill_tests_wait
 	fi
 
-	if reset "delete and re-add"; then
+	if reset "delete and re-add" &&
+	   mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 1 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow
diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
index 3286536b79d5..f32045b23b89 100644
--- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
@@ -38,3 +38,67 @@ mptcp_lib_check_mptcp() {
 		exit ${KSFT_SKIP}
 	fi
 }
+
+mptcp_lib_check_kallsyms() {
+	if ! mptcp_lib_has_file "/proc/kallsyms"; then
+		echo "SKIP: CONFIG_KALLSYMS is missing"
+		exit ${KSFT_SKIP}
+	fi
+}
+
+# Internal: use mptcp_lib_kallsyms_has() instead
+__mptcp_lib_kallsyms_has() {
+	local sym="${1}"
+
+	mptcp_lib_check_kallsyms
+
+	grep -q " ${sym}" /proc/kallsyms
+}
+
+# $1: part of a symbol to look at, add '$' at the end for full name
+mptcp_lib_kallsyms_has() {
+	local sym="${1}"
+
+	if __mptcp_lib_kallsyms_has "${sym}"; then
+		return 0
+	fi
+
+	mptcp_lib_fail_if_expected_feature "${sym} symbol not found"
+}
+
+# $1: part of a symbol to look at, add '$' at the end for full name
+mptcp_lib_kallsyms_doesnt_have() {
+	local sym="${1}"
+
+	if ! __mptcp_lib_kallsyms_has "${sym}"; then
+		return 0
+	fi
+
+	mptcp_lib_fail_if_expected_feature "${sym} symbol has been found"
+}
+
+# !!!AVOID USING THIS!!!
+# Features might not land in the expected version and features can be backported
+#
+# $1: kernel version, e.g. 6.3
+mptcp_lib_kversion_ge() {
+	local exp_maj="${1%.*}"
+	local exp_min="${1#*.}"
+	local v maj min
+
+	# If the kernel has backported features, set this env var to 1:
+	if [ "${SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK:-}" = "1" ]; then
+		return 0
+	fi
+
+	v=$(uname -r | cut -d'.' -f1,2)
+	maj=${v%.*}
+	min=${v#*.}
+
+	if   [ "${maj}" -gt "${exp_maj}" ] ||
+	   { [ "${maj}" -eq "${exp_maj}" ] && [ "${min}" -ge "${exp_min}" ]; }; then
+		return 0
+	fi
+
+	mptcp_lib_fail_if_expected_feature "kernel version ${1} lower than ${v}"
+}
diff --git a/tools/testing/selftests/net/mptcp/mptcp_sockopt.c b/tools/testing/selftests/net/mptcp/mptcp_sockopt.c
index ae61f39556ca..b35148edbf02 100644
--- a/tools/testing/selftests/net/mptcp/mptcp_sockopt.c
+++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.c
@@ -87,6 +87,10 @@ struct so_state {
 	uint64_t tcpi_rcv_delta;
 };
 
+#ifndef MIN
+#define MIN(a, b) ((a) < (b) ? (a) : (b))
+#endif
+
 static void die_perror(const char *msg)
 {
 	perror(msg);
@@ -349,13 +353,14 @@ static void do_getsockopt_tcp_info(struct so_state *s, int fd, size_t r, size_t
 			xerror("getsockopt MPTCP_TCPINFO (tries %d, %m)");
 
 		assert(olen <= sizeof(ti));
-		assert(ti.d.size_user == ti.d.size_kernel);
-		assert(ti.d.size_user == sizeof(struct tcp_info));
+		assert(ti.d.size_kernel > 0);
+		assert(ti.d.size_user ==
+		       MIN(ti.d.size_kernel, sizeof(struct tcp_info)));
 		assert(ti.d.num_subflows == 1);
 
 		assert(olen > (socklen_t)sizeof(struct mptcp_subflow_data));
 		olen -= sizeof(struct mptcp_subflow_data);
-		assert(olen == sizeof(struct tcp_info));
+		assert(olen == ti.d.size_user);
 
 		if (ti.ti[0].tcpi_bytes_sent == w &&
 		    ti.ti[0].tcpi_bytes_received == r)
@@ -401,13 +406,14 @@ static void do_getsockopt_subflow_addrs(int fd)
 		die_perror("getsockopt MPTCP_SUBFLOW_ADDRS");
 
 	assert(olen <= sizeof(addrs));
-	assert(addrs.d.size_user == addrs.d.size_kernel);
-	assert(addrs.d.size_user == sizeof(struct mptcp_subflow_addrs));
+	assert(addrs.d.size_kernel > 0);
+	assert(addrs.d.size_user ==
+	       MIN(addrs.d.size_kernel, sizeof(struct mptcp_subflow_addrs)));
 	assert(addrs.d.num_subflows == 1);
 
 	assert(olen > (socklen_t)sizeof(struct mptcp_subflow_data));
 	olen -= sizeof(struct mptcp_subflow_data);
-	assert(olen == sizeof(struct mptcp_subflow_addrs));
+	assert(olen == addrs.d.size_user);
 
 	llen = sizeof(local);
 	ret = getsockname(fd, (struct sockaddr *)&local, &llen);
diff --git a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
index ff5adbb9c7f2..f295a371ff14 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
@@ -87,6 +87,7 @@ cleanup()
 }
 
 mptcp_lib_check_mptcp
+mptcp_lib_check_kallsyms
 
 ip -Version > /dev/null 2>&1
 if [ $? -ne 0 ];then
@@ -186,9 +187,14 @@ do_transfer()
 		local_addr="0.0.0.0"
 	fi
 
+	cmsg="TIMESTAMPNS"
+	if mptcp_lib_kallsyms_has "mptcp_ioctl$"; then
+		cmsg+=",TCPINQ"
+	fi
+
 	timeout ${timeout_test} \
 		ip netns exec ${listener_ns} \
-			$mptcp_connect -t ${timeout_poll} -l -M 1 -p $port -s ${srv_proto} -c TIMESTAMPNS,TCPINQ \
+			$mptcp_connect -t ${timeout_poll} -l -M 1 -p $port -s ${srv_proto} -c "${cmsg}" \
 				${local_addr} < "$sin" > "$sout" &
 	local spid=$!
 
@@ -196,7 +202,7 @@ do_transfer()
 
 	timeout ${timeout_test} \
 		ip netns exec ${connector_ns} \
-			$mptcp_connect -t ${timeout_poll} -M 2 -p $port -s ${cl_proto} -c TIMESTAMPNS,TCPINQ \
+			$mptcp_connect -t ${timeout_poll} -M 2 -p $port -s ${cl_proto} -c "${cmsg}" \
 				$connect_addr < "$cin" > "$cout" &
 
 	local cpid=$!
@@ -253,6 +259,11 @@ do_mptcp_sockopt_tests()
 {
 	local lret=0
 
+	if ! mptcp_lib_kallsyms_has "mptcp_diag_fill_info$"; then
+		echo "INFO: MPTCP sockopt not supported: SKIP"
+		return
+	fi
+
 	ip netns exec "$ns_sbox" ./mptcp_sockopt
 	lret=$?
 
@@ -307,6 +318,11 @@ do_tcpinq_tests()
 {
 	local lret=0
 
+	if ! mptcp_lib_kallsyms_has "mptcp_ioctl$"; then
+		echo "INFO: TCP_INQ not supported: SKIP"
+		return
+	fi
+
 	local args
 	for args in "-t tcp" "-r tcp"; do
 		do_tcpinq_test $args
diff --git a/tools/testing/selftests/net/mptcp/pm_netlink.sh b/tools/testing/selftests/net/mptcp/pm_netlink.sh
index 32f7533e0919..d02e0d63a8f9 100755
--- a/tools/testing/selftests/net/mptcp/pm_netlink.sh
+++ b/tools/testing/selftests/net/mptcp/pm_netlink.sh
@@ -73,8 +73,12 @@ check()
 }
 
 check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "defaults addr list"
-check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0
+
+default_limits="$(ip netns exec $ns1 ./pm_nl_ctl limits)"
+if mptcp_lib_expect_all_features; then
+	check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0
 subflows 2" "defaults limits"
+fi
 
 ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1
 ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.2 flags subflow dev lo
@@ -121,12 +125,10 @@ ip netns exec $ns1 ./pm_nl_ctl flush
 check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "flush addrs"
 
 ip netns exec $ns1 ./pm_nl_ctl limits 9 1
-check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0
-subflows 2" "rcv addrs above hard limit"
+check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "rcv addrs above hard limit"
 
 ip netns exec $ns1 ./pm_nl_ctl limits 1 9
-check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0
-subflows 2" "subflows above hard limit"
+check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "subflows above hard limit"
 
 ip netns exec $ns1 ./pm_nl_ctl limits 8 8
 check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 8
@@ -176,14 +178,19 @@ subflow,backup 10.0.1.1" "set flags (backup)"
 ip netns exec $ns1 ./pm_nl_ctl set 10.0.1.1 flags nobackup
 check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
 subflow 10.0.1.1" "          (nobackup)"
+
+# fullmesh support has been added later
 ip netns exec $ns1 ./pm_nl_ctl set id 1 flags fullmesh
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
+if ip netns exec $ns1 ./pm_nl_ctl dump | grep -q "fullmesh" ||
+   mptcp_lib_expect_all_features; then
+	check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
 subflow,fullmesh 10.0.1.1" "          (fullmesh)"
-ip netns exec $ns1 ./pm_nl_ctl set id 1 flags nofullmesh
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
+	ip netns exec $ns1 ./pm_nl_ctl set id 1 flags nofullmesh
+	check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
 subflow 10.0.1.1" "          (nofullmesh)"
-ip netns exec $ns1 ./pm_nl_ctl set id 1 flags backup,fullmesh
-check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
+	ip netns exec $ns1 ./pm_nl_ctl set id 1 flags backup,fullmesh
+	check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
 subflow,backup,fullmesh 10.0.1.1" "          (backup,fullmesh)"
+fi
 
 exit $ret
diff --git a/tools/testing/selftests/net/mptcp/userspace_pm.sh b/tools/testing/selftests/net/mptcp/userspace_pm.sh
index 8092399d911f..98d9e4d2d3fc 100755
--- a/tools/testing/selftests/net/mptcp/userspace_pm.sh
+++ b/tools/testing/selftests/net/mptcp/userspace_pm.sh
@@ -4,11 +4,17 @@
 . "$(dirname "${0}")/mptcp_lib.sh"
 
 mptcp_lib_check_mptcp
+mptcp_lib_check_kallsyms
+
+if ! mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
+	echo "userspace pm tests are not supported by the kernel: SKIP"
+	exit ${KSFT_SKIP}
+fi
 
 ip -Version > /dev/null 2>&1
 if [ $? -ne 0 ];then
 	echo "SKIP: Cannot not run test without ip tool"
-	exit 1
+	exit ${KSFT_SKIP}
 fi
 
 ANNOUNCED=6        # MPTCP_EVENT_ANNOUNCED
@@ -909,6 +915,11 @@ test_listener()
 {
 	print_title "Listener tests"
 
+	if ! mptcp_lib_kallsyms_has "mptcp_event_pm_listener$"; then
+		stdbuf -o0 -e0 printf "LISTENER events                                            \t[SKIP] Not supported\n"
+		return
+	fi
+
 	# Capture events on the network namespace running the client
 	:>$client_evts
 
diff --git a/tools/testing/selftests/ptp/testptp.c b/tools/testing/selftests/ptp/testptp.c
index 198ad5f32187..cfa9562f3cd8 100644
--- a/tools/testing/selftests/ptp/testptp.c
+++ b/tools/testing/selftests/ptp/testptp.c
@@ -502,11 +502,11 @@ int main(int argc, char *argv[])
 			interval = t2 - t1;
 			offset = (t2 + t1) / 2 - tp;
 
-			printf("system time: %lld.%u\n",
+			printf("system time: %lld.%09u\n",
 				(pct+2*i)->sec, (pct+2*i)->nsec);
-			printf("phc    time: %lld.%u\n",
+			printf("phc    time: %lld.%09u\n",
 				(pct+2*i+1)->sec, (pct+2*i+1)->nsec);
-			printf("system time: %lld.%u\n",
+			printf("system time: %lld.%09u\n",
 				(pct+2*i+2)->sec, (pct+2*i+2)->nsec);
 			printf("system/phc clock time offset is %" PRId64 " ns\n"
 			       "system     clock time delay  is %" PRId64 " ns\n",
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config
index 4638c63a339f..6e73b09c20c8 100644
--- a/tools/testing/selftests/tc-testing/config
+++ b/tools/testing/selftests/tc-testing/config
@@ -6,20 +6,18 @@ CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_ZONES=y
 CONFIG_NF_CONNTRACK_LABELS=y
 CONFIG_NF_NAT=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
 
 CONFIG_NET_SCHED=y
 
 #
 # Queueing/Scheduling
 #
-CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_CAKE=m
-CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_CBS=m
 CONFIG_NET_SCH_CHOKE=m
 CONFIG_NET_SCH_CODEL=m
 CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_ETF=m
 CONFIG_NET_SCH_FQ=m
 CONFIG_NET_SCH_FQ_CODEL=m
@@ -57,8 +55,6 @@ CONFIG_NET_CLS_FLOW=m
 CONFIG_NET_CLS_FLOWER=m
 CONFIG_NET_CLS_MATCHALL=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 CONFIG_NET_EMATCH_CMP=m
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
index ba2f5e79cdbf..e21c7f22c6d4 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json
@@ -58,10 +58,10 @@
         "setup": [
             "$IP link add dev $DUMMY type dummy || /bin/true"
         ],
-        "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb db 10",
+        "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfb db 100",
         "expExitCode": "0",
         "verifyCmd": "$TC qdisc show dev $DUMMY",
-        "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 10ms",
+        "matchPattern": "qdisc sfb 1: root refcnt [0-9]+ rehash 600s db 100ms",
         "matchCount": "1",
         "teardown": [
             "$TC qdisc del dev $DUMMY handle 1: root",
diff --git a/tools/testing/selftests/tc-testing/tdc.sh b/tools/testing/selftests/tc-testing/tdc.sh
index afb0cd86fa3d..eb357bd7923c 100755
--- a/tools/testing/selftests/tc-testing/tdc.sh
+++ b/tools/testing/selftests/tc-testing/tdc.sh
@@ -2,5 +2,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
 modprobe netdevsim
+modprobe sch_teql
 ./tdc.py -c actions --nobuildebpf
 ./tdc.py -c qdisc
diff --git a/tools/virtio/ringtest/.gitignore b/tools/virtio/ringtest/.gitignore
new file mode 100644
index 000000000000..100b9e30c0f4
--- /dev/null
+++ b/tools/virtio/ringtest/.gitignore
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+/noring
+/ptr_ring
+/ring
+/virtio_ring_0_9
+/virtio_ring_inorder
+/virtio_ring_poll
diff --git a/tools/virtio/ringtest/main.h b/tools/virtio/ringtest/main.h
index b68920d52750..d18dd317e27f 100644
--- a/tools/virtio/ringtest/main.h
+++ b/tools/virtio/ringtest/main.h
@@ -8,6 +8,7 @@
 #ifndef MAIN_H
 #define MAIN_H
 
+#include <assert.h>
 #include <stdbool.h>
 
 extern int param;
@@ -95,6 +96,8 @@ extern unsigned ring_size;
 #define cpu_relax() asm ("rep; nop" ::: "memory")
 #elif defined(__s390x__)
 #define cpu_relax() barrier()
+#elif defined(__aarch64__)
+#define cpu_relax() asm ("yield" ::: "memory")
 #else
 #define cpu_relax() assert(0)
 #endif
@@ -112,6 +115,8 @@ static inline void busy_wait(void)
 
 #if defined(__x86_64__) || defined(__i386__)
 #define smp_mb()     asm volatile("lock; addl $0,-132(%%rsp)" ::: "memory", "cc")
+#elif defined(__aarch64__)
+#define smp_mb()     asm volatile("dmb ish" ::: "memory")
 #else
 /*
  * Not using __ATOMIC_SEQ_CST since gcc docs say they are only synchronized
@@ -136,10 +141,16 @@ static inline void busy_wait(void)
 
 #if defined(__i386__) || defined(__x86_64__) || defined(__s390x__)
 #define smp_wmb() barrier()
+#elif defined(__aarch64__)
+#define smp_wmb() asm volatile("dmb ishst" ::: "memory")
 #else
 #define smp_wmb() smp_release()
 #endif
 
+#ifndef __always_inline
+#define __always_inline inline __attribute__((always_inline))
+#endif
+
 static __always_inline
 void __read_once_size(const volatile void *p, void *res, int size)
 {
diff --git a/tools/virtio/virtio-trace/README b/tools/virtio/virtio-trace/README
index 4fb9368bf751..0127ff0c54b0 100644
--- a/tools/virtio/virtio-trace/README
+++ b/tools/virtio/virtio-trace/README
@@ -95,7 +95,7 @@ Run
 
 1) Enable ftrace in the guest
  <Example>
-	# echo 1 > /sys/kernel/debug/tracing/events/sched/enable
+	# echo 1 > /sys/kernel/tracing/events/sched/enable
 
 2) Run trace agent in the guest
  This agent must be operated as root.
diff --git a/tools/virtio/virtio-trace/trace-agent.c b/tools/virtio/virtio-trace/trace-agent.c
index cdfe77c2b4c8..7e2d9bbf0b84 100644
--- a/tools/virtio/virtio-trace/trace-agent.c
+++ b/tools/virtio/virtio-trace/trace-agent.c
@@ -18,8 +18,9 @@
 #define PIPE_DEF_BUFS		16
 #define PIPE_MIN_SIZE		(PAGE_SIZE*PIPE_DEF_BUFS)
 #define PIPE_MAX_SIZE		(1024*1024)
-#define READ_PATH_FMT	\
-		"/sys/kernel/debug/tracing/per_cpu/cpu%d/trace_pipe_raw"
+#define TRACEFS 		"/sys/kernel/tracing"
+#define DEBUGFS 		"/sys/kernel/debug/tracing"
+#define READ_PATH_FMT		"%s/per_cpu/cpu%d/trace_pipe_raw"
 #define WRITE_PATH_FMT		"/dev/virtio-ports/trace-path-cpu%d"
 #define CTL_PATH		"/dev/virtio-ports/agent-ctl-path"
 
@@ -120,9 +121,12 @@ static const char *make_path(int cpu_num, bool this_is_write_path)
 	if (this_is_write_path)
 		/* write(output) path */
 		ret = snprintf(buf, PATH_MAX, WRITE_PATH_FMT, cpu_num);
-	else
+	else {
 		/* read(input) path */
-		ret = snprintf(buf, PATH_MAX, READ_PATH_FMT, cpu_num);
+		ret = snprintf(buf, PATH_MAX, READ_PATH_FMT, TRACEFS, cpu_num);
+		if (ret > 0 && access(buf, F_OK) != 0)
+			ret = snprintf(buf, PATH_MAX, READ_PATH_FMT, DEBUGFS, cpu_num);
+	}
 
 	if (ret <= 0) {
 		pr_err("Failed to generate %s path(CPU#%d):%d\n",