aboutsummaryrefslogtreecommitdiff
path: root/tools
diff options
context:
space:
mode:
authorLinus Torvalds2020-02-27 16:34:41 -0800
committerLinus Torvalds2020-02-27 16:34:41 -0800
commit7058b837899fc978c9f8a033fa29ab07360a85c8 (patch)
tree94a8180a13f40f58ba07b01f9b129c72a278835c /tools
parenta2f0b878c3ca531a1706cb2a8b079cea3b17bafc (diff)
parent3ee339eb28959629db33aaa2b8cde4c63c6289eb (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller: 1) Fix leak in nl80211 AP start where we leak the ACL memory, from Johannes Berg. 2) Fix double mutex unlock in mac80211, from Andrei Otcheretianski. 3) Fix RCU stall in ipset, from Jozsef Kadlecsik. 4) Fix devlink locking in devlink_dpipe_table_register, from Madhuparna Bhowmik. 5) Fix race causing TX hang in ll_temac, from Esben Haabendal. 6) Stale eth hdr pointer in br_dev_xmit(), from Nikolay Aleksandrov. 7) Fix TX hash calculation bounds checking wrt. tc rules, from Amritha Nambiar. 8) Size netlink responses properly in schedule action code to take into consideration TCA_ACT_FLAGS. From Jiri Pirko. 9) Fix firmware paths for mscc PHY driver, from Antoine Tenart. 10) Don't register stmmac notifier multiple times, from Aaro Koskinen. 11) Various rmnet bug fixes, from Taehee Yoo. 12) Fix vsock deadlock in vsock transport release, from Stefano Garzarella. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) net: dsa: mv88e6xxx: Fix masking of egress port mlxsw: pci: Wait longer before accessing the device after reset sfc: fix timestamp reconstruction at 16-bit rollover points vsock: fix potential deadlock in transport->release() unix: It's CONFIG_PROC_FS not CONFIG_PROCFS net: rmnet: fix packet forwarding in rmnet bridge mode net: rmnet: fix bridge mode bugs net: rmnet: use upper/lower device infrastructure net: rmnet: do not allow to change mux id if mux id is duplicated net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device() net: rmnet: fix suspicious RCU usage net: rmnet: fix NULL pointer dereference in rmnet_changelink() net: rmnet: fix NULL pointer dereference in rmnet_newlink() net: phy: marvell: don't interpret PHY status unless resolved mlx5: register lag notifier for init network namespace only unix: define and set show_fdinfo only if procfs is enabled hinic: fix a bug of rss configuration hinic: fix a bug of setting hw_ioctxt hinic: fix a irq affinity bug net/smc: check for valid ib_client_data ...
Diffstat (limited to 'tools')
-rwxr-xr-xtools/testing/selftests/netfilter/nft_concat_range.sh55
1 files changed, 45 insertions, 10 deletions
diff --git a/tools/testing/selftests/netfilter/nft_concat_range.sh b/tools/testing/selftests/netfilter/nft_concat_range.sh
index aca21dde102a..5a4938d6dcf2 100755
--- a/tools/testing/selftests/netfilter/nft_concat_range.sh
+++ b/tools/testing/selftests/netfilter/nft_concat_range.sh
@@ -13,11 +13,12 @@
KSELFTEST_SKIP=4
# Available test groups:
+# - reported_issues: check for issues that were reported in the past
# - correctness: check that packets match given entries, and only those
# - concurrency: attempt races between insertion, deletion and lookup
# - timeout: check that packets match entries until they expire
# - performance: estimate matching rate, compare with rbtree and hash baselines
-TESTS="correctness concurrency timeout"
+TESTS="reported_issues correctness concurrency timeout"
[ "${quicktest}" != "1" ] && TESTS="${TESTS} performance"
# Set types, defined by TYPE_ variables below
@@ -25,6 +26,9 @@ TYPES="net_port port_net net6_port port_proto net6_port_mac net6_port_mac_proto
net_port_net net_mac net_mac_icmp net6_mac_icmp net6_port_net6_port
net_port_mac_proto_net"
+# Reported bugs, also described by TYPE_ variables below
+BUGS="flush_remove_add"
+
# List of possible paths to pktgen script from kernel tree for performance tests
PKTGEN_SCRIPT_PATHS="
../../../samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
@@ -327,6 +331,12 @@ flood_spec ip daddr . tcp dport . meta l4proto . ip saddr
perf_duration 0
"
+# Definition of tests for bugs reported in the past:
+# display display text for test report
+TYPE_flush_remove_add="
+display Add two elements, flush, re-add
+"
+
# Set template for all tests, types and rules are filled in depending on test
set_template='
flush ruleset
@@ -440,6 +450,8 @@ setup_set() {
# Check that at least one of the needed tools is available
check_tools() {
+ [ -z "${tools}" ] && return 0
+
__tools=
for tool in ${tools}; do
if [ "${tool}" = "nc" ] && [ "${proto}" = "udp6" ] && \
@@ -1025,7 +1037,7 @@ format_noconcat() {
add() {
if ! nft add element inet filter test "${1}"; then
err "Failed to add ${1} given ruleset:"
- err "$(nft list ruleset -a)"
+ err "$(nft -a list ruleset)"
return 1
fi
}
@@ -1045,7 +1057,7 @@ add_perf() {
add_perf_norange() {
if ! nft add element netdev perf norange "${1}"; then
err "Failed to add ${1} given ruleset:"
- err "$(nft list ruleset -a)"
+ err "$(nft -a list ruleset)"
return 1
fi
}
@@ -1054,7 +1066,7 @@ add_perf_norange() {
add_perf_noconcat() {
if ! nft add element netdev perf noconcat "${1}"; then
err "Failed to add ${1} given ruleset:"
- err "$(nft list ruleset -a)"
+ err "$(nft -a list ruleset)"
return 1
fi
}
@@ -1063,7 +1075,7 @@ add_perf_noconcat() {
del() {
if ! nft delete element inet filter test "${1}"; then
err "Failed to delete ${1} given ruleset:"
- err "$(nft list ruleset -a)"
+ err "$(nft -a list ruleset)"
return 1
fi
}
@@ -1134,7 +1146,7 @@ send_match() {
err " $(for f in ${src}; do
eval format_\$f "${2}"; printf ' '; done)"
err "should have matched ruleset:"
- err "$(nft list ruleset -a)"
+ err "$(nft -a list ruleset)"
return 1
fi
nft reset counter inet filter test >/dev/null
@@ -1160,7 +1172,7 @@ send_nomatch() {
err " $(for f in ${src}; do
eval format_\$f "${2}"; printf ' '; done)"
err "should not have matched ruleset:"
- err "$(nft list ruleset -a)"
+ err "$(nft -a list ruleset)"
return 1
fi
}
@@ -1430,6 +1442,23 @@ test_performance() {
kill "${perf_pid}"
}
+test_bug_flush_remove_add() {
+ set_cmd='{ set s { type ipv4_addr . inet_service; flags interval; }; }'
+ elem1='{ 10.0.0.1 . 22-25, 10.0.0.1 . 10-20 }'
+ elem2='{ 10.0.0.1 . 10-20, 10.0.0.1 . 22-25 }'
+ for i in `seq 1 100`; do
+ nft add table t ${set_cmd} || return ${KSELFTEST_SKIP}
+ nft add element t s ${elem1} 2>/dev/null || return 1
+ nft flush set t s 2>/dev/null || return 1
+ nft add element t s ${elem2} 2>/dev/null || return 1
+ done
+ nft flush ruleset
+}
+
+test_reported_issues() {
+ eval test_bug_"${subtest}"
+}
+
# Run everything in a separate network namespace
[ "${1}" != "run" ] && { unshare -n "${0}" run; exit $?; }
tmp="$(mktemp)"
@@ -1438,9 +1467,15 @@ trap cleanup EXIT
# Entry point for test runs
passed=0
for name in ${TESTS}; do
- printf "TEST: %s\n" "${name}"
- for type in ${TYPES}; do
- eval desc=\$TYPE_"${type}"
+ printf "TEST: %s\n" "$(echo ${name} | tr '_' ' ')"
+ if [ "${name}" = "reported_issues" ]; then
+ SUBTESTS="${BUGS}"
+ else
+ SUBTESTS="${TYPES}"
+ fi
+
+ for subtest in ${SUBTESTS}; do
+ eval desc=\$TYPE_"${subtest}"
IFS='
'
for __line in ${desc}; do