diff options
| -rw-r--r-- | drivers/hwmon/lm90.c | 88 |
1 files changed, 61 insertions, 27 deletions
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 14e36c114d61..5e414ca80a78 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -179,6 +179,23 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, #define LM90_HAVE_TEMP3 (1 << 6) /* 3rd temperature sensor */ #define LM90_HAVE_BROKEN_ALERT (1 << 7) /* Broken alert */ +/* LM90 status */ +#define LM90_STATUS_LTHRM (1 << 0) /* local THERM limit tripped */ +#define LM90_STATUS_RTHRM (1 << 1) /* remote THERM limit tripped */ +#define LM90_STATUS_ROPEN (1 << 2) /* remote is an open circuit */ +#define LM90_STATUS_RLOW (1 << 3) /* remote low temp limit tripped */ +#define LM90_STATUS_RHIGH (1 << 4) /* remote high temp limit tripped */ +#define LM90_STATUS_LLOW (1 << 5) /* local low temp limit tripped */ +#define LM90_STATUS_LHIGH (1 << 6) /* local high temp limit tripped */ + +#define MAX6696_STATUS2_R2THRM (1 << 1) /* remote2 THERM limit tripped */ +#define MAX6696_STATUS2_R2OPEN (1 << 2) /* remote2 is an open circuit */ +#define MAX6696_STATUS2_R2LOW (1 << 3) /* remote2 low temp limit tripped */ +#define MAX6696_STATUS2_R2HIGH (1 << 4) /* remote2 high temp limit tripped */ +#define MAX6696_STATUS2_ROT2 (1 << 5) /* remote emergency limit tripped */ +#define MAX6696_STATUS2_R2OT2 (1 << 6) /* remote2 emergency limit tripped */ +#define MAX6696_STATUS2_LOT2 (1 << 7) /* local emergency limit tripped */ + /* * Driver data (common to all clients) */ @@ -1391,6 +1408,43 @@ static void lm90_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config); } +static bool lm90_is_tripped(struct i2c_client *client, u16 *status) +{ + struct lm90_data *data = i2c_get_clientdata(client); + u8 st, st2 = 0; + + lm90_read_reg(client, LM90_REG_R_STATUS, &st); + + if (data->kind == max6696) + lm90_read_reg(client, MAX6696_REG_R_STATUS2, &st2); + + *status = st | (st2 << 8); + + if ((st & 0x7f) == 0 && (st2 & 0xfe) == 0) + return false; + + if ((st & (LM90_STATUS_LLOW | LM90_STATUS_LHIGH | LM90_STATUS_LTHRM)) || + (st2 & MAX6696_STATUS2_LOT2)) + dev_warn(&client->dev, + "temp%d out of range, please check!\n", 1); + if ((st & (LM90_STATUS_RLOW | LM90_STATUS_RHIGH | LM90_STATUS_RTHRM)) || + (st2 & MAX6696_STATUS2_ROT2)) + dev_warn(&client->dev, + "temp%d out of range, please check!\n", 2); + if (st & LM90_STATUS_ROPEN) + dev_warn(&client->dev, + "temp%d diode open, please check!\n", 2); + if (st2 & (MAX6696_STATUS2_R2LOW | MAX6696_STATUS2_R2HIGH | + MAX6696_STATUS2_R2THRM | MAX6696_STATUS2_R2OT2)) + dev_warn(&client->dev, + "temp%d out of range, please check!\n", 3); + if (st2 & MAX6696_STATUS2_R2OPEN) + dev_warn(&client->dev, + "temp%d diode open, please check!\n", 3); + + return true; +} + static int lm90_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1489,46 +1543,26 @@ static int lm90_remove(struct i2c_client *client) static void lm90_alert(struct i2c_client *client, unsigned int flag) { - struct lm90_data *data = i2c_get_clientdata(client); - u8 config, alarms, alarms2 = 0; - - lm90_read_reg(client, LM90_REG_R_STATUS, &alarms); - - if (data->kind == max6696) - lm90_read_reg(client, MAX6696_REG_R_STATUS2, &alarms2); - - if ((alarms & 0x7f) == 0 && (alarms2 & 0xfe) == 0) { - dev_info(&client->dev, "Everything OK\n"); - } else { - if ((alarms & 0x61) || (alarms2 & 0x80)) - dev_warn(&client->dev, - "temp%d out of range, please check!\n", 1); - if ((alarms & 0x1a) || (alarms2 & 0x20)) - dev_warn(&client->dev, - "temp%d out of range, please check!\n", 2); - if (alarms & 0x04) - dev_warn(&client->dev, - "temp%d diode open, please check!\n", 2); - - if (alarms2 & 0x5a) - dev_warn(&client->dev, - "temp%d out of range, please check!\n", 3); - if (alarms2 & 0x04) - dev_warn(&client->dev, - "temp%d diode open, please check!\n", 3); + u16 alarms; + if (lm90_is_tripped(client, &alarms)) { /* * Disable ALERT# output, because these chips don't implement * SMBus alert correctly; they should only hold the alert line * low briefly. */ + struct lm90_data *data = i2c_get_clientdata(client); + if ((data->flags & LM90_HAVE_BROKEN_ALERT) && (alarms & data->alert_alarms)) { + u8 config; dev_dbg(&client->dev, "Disabling ALERT#\n"); lm90_read_reg(client, LM90_REG_R_CONFIG1, &config); i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config | 0x80); } + } else { + dev_info(&client->dev, "Everything OK\n"); } } |