diff options
28 files changed, 9 insertions, 4256 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 570ac3442b5d..5d323d8c626e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15263,7 +15263,6 @@ Q: http://patchwork.kernel.org/project/linux-omap/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git F: arch/arm/configs/omap1_defconfig F: arch/arm/mach-omap1/ -F: arch/arm/plat-omap/ F: drivers/i2c/busses/i2c-omap.c F: include/linux/platform_data/ams-delta-fiq.h F: include/linux/platform_data/i2c-omap.h @@ -15278,7 +15277,6 @@ Q: http://patchwork.kernel.org/project/linux-omap/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git F: arch/arm/configs/omap2plus_defconfig F: arch/arm/mach-omap2/ -F: arch/arm/plat-omap/ F: drivers/bus/ti-sysc.c F: drivers/i2c/busses/i2c-omap.c F: drivers/irqchip/irq-omap-intc.c diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 320c93fabb21..c03fd448c59e 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -760,30 +760,6 @@ choice depends on ARCH_OMAP2PLUS select DEBUG_UART_8250 - config DEBUG_OMAP7XXUART1 - bool "Kernel low-level debugging via OMAP730 UART1" - depends on ARCH_OMAP730 - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART1. - - config DEBUG_OMAP7XXUART2 - bool "Kernel low-level debugging via OMAP730 UART2" - depends on ARCH_OMAP730 - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART2. - - config DEBUG_OMAP7XXUART3 - bool "Kernel low-level debugging via OMAP730 UART3" - depends on ARCH_OMAP730 - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on OMAP730 based platforms on the UART3. - config DEBUG_TI81XXUART1 bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" depends on ARCH_OMAP2PLUS @@ -1728,9 +1704,9 @@ config DEBUG_UART_PHYS default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 default 0xfff36000 if DEBUG_HIGHBANK_UART - default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 - default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 - default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 + default 0xfffb0000 if DEBUG_OMAP1UART1 + default 0xfffb0800 if DEBUG_OMAP1UART2 + default 0xfffb9800 if DEBUG_OMAP1UART3 default 0xfffe8600 if DEBUG_BCM63XX_UART default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU default 0xfffff200 if DEBUG_AT91_RM9200_DBGU @@ -1847,9 +1823,9 @@ config DEBUG_UART_VIRT default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xfef36000 if DEBUG_HIGHBANK_UART - default 0xff0b0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 - default 0xff0b0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 - default 0xff0b9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 + default 0xff0b0000 if DEBUG_OMAP1UART1 + default 0xff0b0800 if DEBUG_OMAP1UART2 + default 0xff0b9800 if DEBUG_OMAP1UART3 default 0xffd01000 if DEBUG_HIP01_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 246f1bba7df5..53dd0717cea5 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -20,8 +20,6 @@ CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP1=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP730=y -CONFIG_ARCH_OMAP850=y CONFIG_ARCH_OMAP16XX=y # CONFIG_OMAP_MUX is not set CONFIG_OMAP_RESET_CLOCKS=y diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 7ec7ada287e0..03b0ba2e8653 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -19,19 +19,6 @@ menu "TI OMAP1 specific features" comment "OMAP Core Type" -config ARCH_OMAP730 - depends on ARCH_MULTI_V5 - bool "OMAP730 Based System" - select ARCH_OMAP_OTG - select CPU_ARM926T - select OMAP_MPU_TIMER - -config ARCH_OMAP850 - depends on ARCH_MULTI_V5 - bool "OMAP850 Based System" - select ARCH_OMAP_OTG - select CPU_ARM926T - config ARCH_OMAP15XX depends on ARCH_MULTI_V4T default y @@ -126,37 +113,6 @@ config ARCH_OMAP_OTG comment "OMAP Board Type" -config MACH_OMAP_INNOVATOR - bool "TI Innovator" - depends on ARCH_OMAP15XX || ARCH_OMAP16XX - depends on UNUSED_BOARD_FILES - help - TI OMAP 1510 or 1610 Innovator board support. Say Y here if you - have such a board. - -config MACH_OMAP_H2 - bool "TI H2 Support" - depends on ARCH_OMAP16XX - depends on UNUSED_BOARD_FILES - help - TI OMAP 1610/1611B H2 board support. Say Y here if you have such - a board. - -config MACH_OMAP_H3 - bool "TI H3 Support" - depends on ARCH_OMAP16XX - depends on UNUSED_BOARD_FILES - help - TI OMAP 1710 H3 board support. Say Y here if you have such - a board. - -config MACH_HERALD - bool "HTC Herald" - depends on ARCH_OMAP850 - depends on UNUSED_BOARD_FILES - help - HTC Herald smartphone support (AKA T-Mobile Wing, ...) - config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP16XX @@ -167,28 +123,11 @@ config MACH_OMAP_OSK config OMAP_OSK_MISTRAL bool "Mistral QVGA board Support" depends on MACH_OMAP_OSK - depends on UNUSED_BOARD_FILES help The OSK supports an optional add-on board with a Quarter-VGA touchscreen, PDA-ish buttons, a resume button, bicolor LED, and camera connector. Say Y here if you have this board. -config MACH_OMAP_PERSEUS2 - bool "TI Perseus2" - depends on ARCH_OMAP730 - depends on UNUSED_BOARD_FILES - help - Support for TI OMAP 730 Perseus2 board. Say Y here if you have such - a board. - -config MACH_OMAP_FSAMPLE - bool "TI F-Sample" - depends on ARCH_OMAP730 - depends on UNUSED_BOARD_FILES - help - Support for TI OMAP 850 F-Sample board. Say Y here if you have such - a board. - config MACH_OMAP_PALMTE bool "Palm Tungsten E" depends on ARCH_OMAP15XX @@ -198,26 +137,6 @@ config MACH_OMAP_PALMTE http://palmtelinux.sourceforge.net/ for more information. Say Y here if you have this PDA model, say N otherwise. -config MACH_OMAP_PALMZ71 - bool "Palm Zire71" - depends on ARCH_OMAP15XX - depends on UNUSED_BOARD_FILES - help - Support for the Palm Zire71 PDA. To boot the kernel, - you'll need a PalmOS compatible bootloader; check out - http://hackndev.com/palm/z71 for more information. - Say Y here if you have such a PDA, say N otherwise. - -config MACH_OMAP_PALMTT - bool "Palm Tungsten|T" - depends on ARCH_OMAP15XX - depends on UNUSED_BOARD_FILES - help - Support for the Palm Tungsten|T PDA. To boot the kernel, you'll - need a PalmOS compatible bootloader (Garux); check out - http://garux.sourceforge.net/ for more information. - Say Y here if you have this PDA model, say N otherwise. - config MACH_SX1 bool "Siemens SX1" depends on ARCH_OMAP15XX @@ -249,16 +168,6 @@ config MACH_AMS_DELTA Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. -config MACH_OMAP_GENERIC - bool "Generic OMAP board" - depends on ARCH_OMAP15XX || ARCH_OMAP16XX - depends on UNUSED_BOARD_FILES - help - Support for generic OMAP-1510, 1610 or 1710 board with - no FPGA. Can be used as template for porting Linux to - custom OMAP boards. Say Y here if you have a custom - board. - endmenu endif diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 0615cb0ba580..d9e251ea4773 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -29,31 +29,13 @@ usb-fs-$(CONFIG_USB_SUPPORT) := usb.o obj-y += $(usb-fs-m) $(usb-fs-y) # Specific board support -obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o \ - board-nand.o -obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o -obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o -obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o board-nand.o -obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o board-nand.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o -obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \ - board-nand.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o -obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o -obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o ams-delta-fiq.o \ ams-delta-fiq-handler.o obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o -obj-$(CONFIG_MACH_HERALD) += board-htcherald.o - -ifeq ($(CONFIG_ARCH_OMAP15XX),y) -# Innovator-1510 FPGA -obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o -endif # GPIO -obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o -obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c deleted file mode 100644 index f21e15c7b973..000000000000 --- a/arch/arm/mach-omap1/board-fsample.c +++ /dev/null @@ -1,366 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-fsample.c - * - * Modified from board-perseus2.c - * - * Original OMAP730 support by Jean Pihet <j-pihet@ti.com> - * Updated for 2.6 by Kevin Hilman <kjh@hilman.org> - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/soc/ti/omap1-io.h> -#include <linux/platform_data/keypad-omap.h> -#include "tc.h" - -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "iomap.h" -#include "common.h" -#include "fpga.h" - -/* fsample is pretty close to p2-sample */ - -#define fsample_cpld_read(reg) __raw_readb(reg) -#define fsample_cpld_write(val, reg) __raw_writeb(val, reg) - -#define FSAMPLE_CPLD_BASE 0xE8100000 -#define FSAMPLE_CPLD_SIZE SZ_4K -#define FSAMPLE_CPLD_START 0x05080000 - -#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00) -#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02) -#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02) -#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04) -#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06) -#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06) - -#define FSAMPLE_CPLD_BIT_BT_RESET 0 -#define FSAMPLE_CPLD_BIT_LCD_RESET 1 -#define FSAMPLE_CPLD_BIT_CAM_PWDN 2 -#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3 -#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4 -#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5 -#define FSAMPLE_CPLD_BIT_BACKLIGHT 6 -#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7 -#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8 -#define FSAMPLE_CPLD_BIT_OTG_RESET 9 - -#define fsample_cpld_set(bit) \ - fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR) - -#define fsample_cpld_clear(bit) \ - fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR) - -static const unsigned int fsample_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(1, 0, KEY_RIGHT), - KEY(2, 0, KEY_LEFT), - KEY(3, 0, KEY_DOWN), - KEY(4, 0, KEY_ENTER), - KEY(0, 1, KEY_F10), - KEY(1, 1, KEY_SEND), - KEY(2, 1, KEY_END), - KEY(3, 1, KEY_VOLUMEDOWN), - KEY(4, 1, KEY_VOLUMEUP), - KEY(5, 1, KEY_RECORD), - KEY(0, 2, KEY_F9), - KEY(1, 2, KEY_3), - KEY(2, 2, KEY_6), - KEY(3, 2, KEY_9), - KEY(4, 2, KEY_KPDOT), - KEY(0, 3, KEY_BACK), - KEY(1, 3, KEY_2), - KEY(2, 3, KEY_5), - KEY(3, 3, KEY_8), - KEY(4, 3, KEY_0), - KEY(5, 3, KEY_KPSLASH), - KEY(0, 4, KEY_HOME), - KEY(1, 4, KEY_1), - KEY(2, 4, KEY_4), - KEY(3, 4, KEY_7), - KEY(4, 4, KEY_KPASTERISK), - KEY(5, 4, KEY_POWER), -}; - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ - .end = H2P2_DBG_FPGA_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = INT_7XX_MPU_EXT_NIRQ, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static void __init fsample_init_smc91x(void) -{ - __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} - -static struct mtd_partition nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* rest of flash is a file system */ - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - }, -}; - -static struct physmap_flash_data nor_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = nor_partitions, - .nr_parts = ARRAY_SIZE(nor_partitions), -}; - -static struct resource nor_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nor_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_data, - }, - .num_resources = 1, - .resource = &nor_resource, -}; - -#define FSAMPLE_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct nand_chip *chip) -{ - return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); -} - -static struct platform_nand_data nand_data = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .options = NAND_SAMSUNG_LP_OPTIONS, - }, - .ctrl = { - .cmd_ctrl = omap1_nand_cmd_ctl, - .dev_ready = nand_dev_ready, - }, -}; - -static struct resource nand_resource = { - .start = OMAP_CS3_PHYS, - .end = OMAP_CS3_PHYS + SZ_4K - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nand_device = { - .name = "gen_nand", - .id = 0, - .dev = { - .platform_data = &nand_data, - }, - .num_resources = 1, - .resource = &nand_resource, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource kp_resources[] = { - [0] = { - .start = INT_7XX_MPUIO_KEYPAD, - .end = INT_7XX_MPUIO_KEYPAD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data fsample_keymap_data = { - .keymap = fsample_keymap, - .keymap_size = ARRAY_SIZE(fsample_keymap), -}; - -static struct omap_kp_platform_data kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &fsample_keymap_data, - .delay = 4, -}; - -static struct platform_device kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &kp_data, - }, - .num_resources = ARRAY_SIZE(kp_resources), - .resource = kp_resources, -}; - -static struct platform_device *devices[] __initdata = { - &nor_device, - &nand_device, - &smc91x_device, - &kp_device, -}; - -static const struct omap_lcd_config fsample_lcd_config = { - .ctrl_name = "internal", -}; - -static void __init omap_fsample_init(void) -{ - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, - OMAP7XX_IO_CONF_9); - - fsample_init_smc91x(); - - BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0); - gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); - - omap_cfg_reg(L3_1610_FLASH_CS2B_OE); - omap_cfg_reg(M8_1610_FLASH_CS2B_WE); - - /* Mux pins for keypad */ - omap_cfg_reg(E2_7XX_KBR0); - omap_cfg_reg(J7_7XX_KBR1); - omap_cfg_reg(E1_7XX_KBR2); - omap_cfg_reg(F3_7XX_KBR3); - omap_cfg_reg(D2_7XX_KBR4); - omap_cfg_reg(C2_7XX_KBC0); - omap_cfg_reg(D3_7XX_KBC1); - omap_cfg_reg(E4_7XX_KBC2); - omap_cfg_reg(F4_7XX_KBC3); - omap_cfg_reg(E3_7XX_KBC4); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); - - omapfb_set_lcd_config(&fsample_lcd_config); -} - -/* Only FPGA needs to be mapped here. All others are done with ioremap */ -static struct map_desc omap_fsample_io_desc[] __initdata = { - { - .virtual = H2P2_DBG_FPGA_BASE, - .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START), - .length = H2P2_DBG_FPGA_SIZE, - .type = MT_DEVICE - }, - { - .virtual = FSAMPLE_CPLD_BASE, - .pfn = __phys_to_pfn(FSAMPLE_CPLD_START), - .length = FSAMPLE_CPLD_SIZE, - .type = MT_DEVICE - } -}; - -static void __init omap_fsample_map_io(void) -{ - omap15xx_map_io(); - iotable_init(omap_fsample_io_desc, - ARRAY_SIZE(omap_fsample_io_desc)); -} - -MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") -/* Maintainer: Brian Swetland <swetland@google.com> */ - .atag_offset = 0x100, - .map_io = omap_fsample_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = omap_fsample_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c deleted file mode 100644 index 3b2bcaf4bb01..000000000000 --- a/arch/arm/mach-omap1/board-generic.c +++ /dev/null @@ -1,85 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-generic.c - * - * Modified from board-innovator1510.c - * - * Code for generic OMAP board. Should work on many OMAP systems where - * the device drivers take care of all the necessary hardware initialization. - * Do not put any board specific code to this file; create a new machine - * type if you need custom low-level initializations. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "hardware.h" -#include "mux.h" -#include "usb.h" -#include "common.h" - -/* assume no Mini-AB port */ - -#ifdef CONFIG_ARCH_OMAP15XX -static struct omap_usb_config generic1510_usb_config __initdata = { - .register_host = 1, - .register_dev = 1, - .hmc_mode = 16, - .pins[0] = 3, -}; -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -static struct omap_usb_config generic1610_usb_config __initdata = { -#ifdef CONFIG_USB_OTG - .otg = 1, -#endif - .register_host = 1, - .register_dev = 1, - .hmc_mode = 16, - .pins[0] = 6, -}; -#endif - -static void __init omap_generic_init(void) -{ -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap15xx()) { - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - omap1_usb_init(&generic1510_usb_config); - } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (!cpu_is_omap1510()) { - omap1_usb_init(&generic1610_usb_config); - } -#endif - - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); -} - -MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") - /* Maintainer: Tony Lindgren <tony@atomide.com> */ - .atag_offset = 0x100, - .map_io = omap16xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = omap_generic_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c deleted file mode 100644 index 06c5404078aa..000000000000 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ /dev/null @@ -1,74 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-h2-mmc.c - * - * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT - * Author: Felipe Balbi <felipe.lima@indt.org.br> - * - * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: - * Copyright (C) 2006 Nokia Corporation - */ -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/platform_data/gpio-omap.h> -#include <linux/mfd/tps65010.h> - -#include "board-h2.h" -#include "mmc.h" - -#if IS_ENABLED(CONFIG_MMC_OMAP) - -static int mmc_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on); - return 0; -} - -static int mmc_late_init(struct device *dev) -{ - int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); - if (ret < 0) - return ret; - - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0); - - return ret; -} - -static void mmc_cleanup(struct device *dev) -{ - gpio_free(H2_TPS_GPIO_MMC_PWR_EN); -} - -/* - * H2 could use the following functions tested: - * - mmc_get_cover_state that uses OMAP_MPUIO(1) - * - mmc_get_wp that uses OMAP_MPUIO(3) - */ -static struct omap_mmc_platform_data mmc1_data = { - .nr_slots = 1, - .init = mmc_late_init, - .cleanup = mmc_cleanup, - .slots[0] = { - .set_power = mmc_set_power, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .name = "mmcblk", - }, -}; - -static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC]; - -void __init h2_mmc_init(void) -{ - mmc_data[0] = &mmc1_data; - omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC); -} - -#else - -void __init h2_mmc_init(void) -{ -} - -#endif diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c deleted file mode 100644 index f28a4c3ea501..000000000000 --- a/arch/arm/mach-omap1/board-h2.c +++ /dev/null @@ -1,448 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-h2.c - * - * Board specific inits for OMAP-1610 H2 - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - * - * H2 specific changes and cleanup - * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com> - */ -#include <linux/gpio.h> -#include <linux/gpio/machine.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/mfd/tps65010.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> -#include <linux/omap-dma.h> -#include <linux/platform_data/gpio-omap.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/leds.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "usb.h" -#include "common.h" -#include "board-h2.h" - -/* The first 16 SoC GPIO lines are on this GPIO chip */ -#define OMAP_GPIO_LABEL "gpio-0-15" - -/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ -#define OMAP1610_ETHR_START 0x04000300 - -static const unsigned int h2_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(1, 0, KEY_RIGHT), - KEY(2, 0, KEY_3), - KEY(3, 0, KEY_F10), - KEY(4, 0, KEY_F5), - KEY(5, 0, KEY_9), - KEY(0, 1, KEY_DOWN), - KEY(1, 1, KEY_UP), - KEY(2, 1, KEY_2), - KEY(3, 1, KEY_F9), - KEY(4, 1, KEY_F7), - KEY(5, 1, KEY_0), - KEY(0, 2, KEY_ENTER), - KEY(1, 2, KEY_6), - KEY(2, 2, KEY_1), - KEY(3, 2, KEY_F2), - KEY(4, 2, KEY_F6), - KEY(5, 2, KEY_HOME), - KEY(0, 3, KEY_8), - KEY(1, 3, KEY_5), - KEY(2, 3, KEY_F12), - KEY(3, 3, KEY_F3), - KEY(4, 3, KEY_F8), - KEY(5, 3, KEY_END), - KEY(0, 4, KEY_7), - KEY(1, 4, KEY_4), - KEY(2, 4, KEY_F11), - KEY(3, 4, KEY_F1), - KEY(4, 4, KEY_F4), - KEY(5, 4, KEY_ESC), - KEY(0, 5, KEY_F13), - KEY(1, 5, KEY_F14), - KEY(2, 5, KEY_F15), - KEY(3, 5, KEY_F16), - KEY(4, 5, KEY_SLEEP), -}; - -static struct mtd_partition h2_nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data h2_nor_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = h2_nor_partitions, - .nr_parts = ARRAY_SIZE(h2_nor_partitions), -}; - -static struct resource h2_nor_resource = { - /* This is on CS3, wherever it's mapped */ - .flags = IORESOURCE_MEM, -}; - -static struct platform_device h2_nor_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &h2_nor_data, - }, - .num_resources = 1, - .resource = &h2_nor_resource, -}; - -static struct mtd_partition h2_nand_partitions[] = { -#if 0 - /* REVISIT: enable these partitions if you make NAND BOOT - * work on your H2 (rev C or newer); published versions of - * x-load only support P2 and H3. - */ - { - .name = "xloader", - .offset = 0, - .size = 64 * 1024, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "bootloader", - .offset = MTDPART_OFS_APPEND, - .size = 256 * 1024, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = 192 * 1024, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 2 * SZ_1M, - }, -#endif - { - .name = "filesystem", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - }, -}; - -#define H2_NAND_RB_GPIO_PIN 62 - -static int h2_nand_dev_ready(struct nand_chip *chip) -{ - return gpio_get_value(H2_NAND_RB_GPIO_PIN); -} - -static struct platform_nand_data h2_nand_platdata = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .nr_partitions = ARRAY_SIZE(h2_nand_partitions), - .partitions = h2_nand_partitions, - .options = NAND_SAMSUNG_LP_OPTIONS, - }, - .ctrl = { - .cmd_ctrl = omap1_nand_cmd_ctl, - .dev_ready = h2_nand_dev_ready, - }, -}; - -static struct resource h2_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device h2_nand_device = { - .name = "gen_nand", - .id = 0, - .dev = { - .platform_data = &h2_nand_platdata, - }, - .num_resources = 1, - .resource = &h2_nand_resource, -}; - -static struct smc91x_platdata h2_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource h2_smc91x_resources[] = { - [0] = { - .start = OMAP1610_ETHR_START, /* Physical */ - .end = OMAP1610_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device h2_smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &h2_smc91x_info, - }, - .num_resources = ARRAY_SIZE(h2_smc91x_resources), - .resource = h2_smc91x_resources, -}; - -static struct resource h2_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data h2_keymap_data = { - .keymap = h2_keymap, - .keymap_size = ARRAY_SIZE(h2_keymap), -}; - -static struct omap_kp_platform_data h2_kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &h2_keymap_data, - .rep = true, - .delay = 9, - .dbounce = true, -}; - -static struct platform_device h2_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &h2_kp_data, - }, - .num_resources = ARRAY_SIZE(h2_kp_resources), - .resource = h2_kp_resources, -}; - -static const struct gpio_led h2_gpio_led_pins[] = { - { - .name = "h2:red", - .default_trigger = "heartbeat", - .gpio = 3, - }, - { - .name = "h2:green", - .default_trigger = "cpu0", - .gpio = OMAP_MPUIO(4), - }, -}; - -static struct gpio_led_platform_data h2_gpio_led_data = { - .leds = h2_gpio_led_pins, - .num_leds = ARRAY_SIZE(h2_gpio_led_pins), -}; - -static struct platform_device h2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &h2_gpio_led_data, - }, -}; - -static struct platform_device *h2_devices[] __initdata = { - &h2_nor_device, - &h2_nand_device, - &h2_smc91x_device, - &h2_kp_device, - &h2_gpio_leds, -}; - -static void __init h2_init_smc91x(void) -{ - if (gpio_request(0, "SMC91x irq") < 0) { - printk("Error requesting gpio 0 for smc91x irq\n"); - return; - } -} - -static int tps_setup(struct i2c_client *client, void *context) -{ - if (!IS_BUILTIN(CONFIG_TPS65010)) - return -ENOSYS; - - tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | - TPS_LDO1_ENABLE | TPS_VLDO1_3_0V); - - return 0; -} - -static struct tps65010_board tps_board = { - .base = H2_TPS_GPIO_BASE, - .outmask = 0x0f, - .setup = tps_setup, -}; - -static struct i2c_board_info __initdata h2_i2c_board_info[] = { - { - I2C_BOARD_INFO("tps65010", 0x48), - .platform_data = &tps_board, - }, { - .type = "isp1301_omap", - .addr = 0x2d, - .dev_name = "isp1301", - }, -}; - -static struct gpiod_lookup_table isp1301_gpiod_table = { - .dev_id = "isp1301", - .table = { - /* Active low since the irq triggers on falling edge */ - GPIO_LOOKUP(OMAP_GPIO_LABEL, 2, - NULL, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct omap_usb_config h2_usb_config __initdata = { - /* usb1 has a Mini-AB port and external isp1301 transceiver */ - .otg = 2, - -#if IS_ENABLED(CONFIG_USB_OMAP) - .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ - /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ -#elif IS_ENABLED(CONFIG_USB_OHCI_HCD) - /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */ - .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ -#endif - - .pins[1] = 3, -}; - -static const struct omap_lcd_config h2_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static void __init h2_init(void) -{ - h2_init_smc91x(); - - /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped - * to address 0 by a dip switch), NAND on CS2B. The NAND driver will - * notice whether a NAND chip is enabled at probe time. - * - * FIXME revC boards (and H3) support NAND-boot, with a dip switch to - * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try - * detecting that in code here, to avoid probing every possible flash - * configuration... - */ - h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys(); - h2_nor_resource.end += SZ_32M - 1; - - h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; - h2_nand_resource.end += SZ_4K - 1; - BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0); - gpio_direction_input(H2_NAND_RB_GPIO_PIN); - - gpiod_add_lookup_table(&isp1301_gpiod_table); - - omap_cfg_reg(L3_1610_FLASH_CS2B_OE); - omap_cfg_reg(M8_1610_FLASH_CS2B_WE); - - /* MMC: card detect and WP */ - /* omap_cfg_reg(U19_ARMIO1); */ /* CD */ - omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ - - /* Mux pins for keypad */ - omap_cfg_reg(F18_1610_KBC0); - omap_cfg_reg(D20_1610_KBC1); - omap_cfg_reg(D19_1610_KBC2); - omap_cfg_reg(E18_1610_KBC3); - omap_cfg_reg(C21_1610_KBC4); - omap_cfg_reg(G18_1610_KBR0); - omap_cfg_reg(F19_1610_KBR1); - omap_cfg_reg(H14_1610_KBR2); - omap_cfg_reg(E20_1610_KBR3); - omap_cfg_reg(E19_1610_KBR4); - omap_cfg_reg(N19_1610_KBR5); - - /* GPIO based LEDs */ - omap_cfg_reg(P18_1610_GPIO3); - omap_cfg_reg(MPUIO4); - - h2_smc91x_resources[1].start = gpio_to_irq(0); - h2_smc91x_resources[1].end = gpio_to_irq(0); - platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); - omap_serial_init(); - - /* ISP1301 IRQ wired at M14 */ - omap_cfg_reg(M14_1510_GPIO2); - h2_i2c_board_info[0].irq = gpio_to_irq(58); - omap_register_i2c_bus(1, 100, h2_i2c_board_info, - ARRAY_SIZE(h2_i2c_board_info)); - omap1_usb_init(&h2_usb_config); - h2_mmc_init(); - - omapfb_set_lcd_config(&h2_lcd_config); -} - -MACHINE_START(OMAP_H2, "TI-H2") - /* Maintainer: Imre Deak <imre.deak@nokia.com> */ - .atag_offset = 0x100, - .map_io = omap16xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = h2_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2.h b/arch/arm/mach-omap1/board-h2.h deleted file mode 100644 index 315e2662547e..000000000000 --- a/arch/arm/mach-omap1/board-h2.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/arm/mach-omap1/board-h2.h - * - * Hardware definitions for TI OMAP1610 H2 board. - * - * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_H2_H -#define __ASM_ARCH_OMAP_H2_H - -#define H2_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) -# define H2_TPS_GPIO_MMC_PWR_EN (H2_TPS_GPIO_BASE + 3) - -extern void h2_mmc_init(void); - -#endif /* __ASM_ARCH_OMAP_H2_H */ - diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c deleted file mode 100644 index f595bd4f5024..000000000000 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ /dev/null @@ -1,64 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-h3-mmc.c - * - * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT - * Author: Felipe Balbi <felipe.lima@indt.org.br> - * - * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: - * Copyright (C) 2006 Nokia Corporation - */ -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <linux/mfd/tps65010.h> - -#include "common.h" -#include "board-h3.h" -#include "mmc.h" - -#if IS_ENABLED(CONFIG_MMC_OMAP) - -static int mmc_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on); - return 0; -} - -/* - * H3 could use the following functions tested: - * - mmc_get_cover_state that uses OMAP_MPUIO(1) - * - mmc_get_wp that maybe uses OMAP_MPUIO(3) - */ -static struct omap_mmc_platform_data mmc1_data = { - .nr_slots = 1, - .slots[0] = { - .set_power = mmc_set_power, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .name = "mmcblk", - }, -}; - -static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC]; - -void __init h3_mmc_init(void) -{ - int ret; - - ret = gpio_request(H3_TPS_GPIO_MMC_PWR_EN, "MMC power"); - if (ret < 0) - return; - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0); - - mmc_data[0] = &mmc1_data; - omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC); -} - -#else - -void __init h3_mmc_init(void) -{ -} - -#endif diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c deleted file mode 100644 index 1e4c57710fcc..000000000000 --- a/arch/arm/mach-omap1/board-h3.c +++ /dev/null @@ -1,455 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-h3.c - * - * This file contains OMAP1710 H3 specific code. - * - * Copyright (C) 2004 Texas Instruments, Inc. - * Copyright (C) 2002 MontaVista Software, Inc. - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com - */ -#include <linux/gpio.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/major.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/errno.h> -#include <linux/workqueue.h> -#include <linux/i2c.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/spi/spi.h> -#include <linux/mfd/tps65010.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> -#include <linux/platform_data/gpio-omap.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/omap-dma.h> -#include <linux/leds.h> - -#include <asm/setup.h> -#include <asm/page.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "irqs.h" -#include "usb.h" -#include "common.h" -#include "board-h3.h" - -/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ -#define OMAP1710_ETHR_START 0x04000300 - -#define H3_TS_GPIO 48 - -static const unsigned int h3_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(1, 0, KEY_RIGHT), - KEY(2, 0, KEY_3), - KEY(3, 0, KEY_F10), - KEY(4, 0, KEY_F5), - KEY(5, 0, KEY_9), - KEY(0, 1, KEY_DOWN), - KEY(1, 1, KEY_UP), - KEY(2, 1, KEY_2), - KEY(3, 1, KEY_F9), - KEY(4, 1, KEY_F7), - KEY(5, 1, KEY_0), - KEY(0, 2, KEY_ENTER), - KEY(1, 2, KEY_6), - KEY(2, 2, KEY_1), - KEY(3, 2, KEY_F2), - KEY(4, 2, KEY_F6), - KEY(5, 2, KEY_HOME), - KEY(0, 3, KEY_8), - KEY(1, 3, KEY_5), - KEY(2, 3, KEY_F12), - KEY(3, 3, KEY_F3), - KEY(4, 3, KEY_F8), - KEY(5, 3, KEY_END), - KEY(0, 4, KEY_7), - KEY(1, 4, KEY_4), - KEY(2, 4, KEY_F11), - KEY(3, 4, KEY_F1), - KEY(4, 4, KEY_F4), - KEY(5, 4, KEY_ESC), - KEY(0, 5, KEY_F13), - KEY(1, 5, KEY_F14), - KEY(2, 5, KEY_F15), - KEY(3, 5, KEY_F16), - KEY(4, 5, KEY_SLEEP), -}; - - -static struct mtd_partition nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data nor_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = nor_partitions, - .nr_parts = ARRAY_SIZE(nor_partitions), -}; - -static struct resource nor_resource = { - /* This is on CS3, wherever it's mapped */ - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nor_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_data, - }, - .num_resources = 1, - .resource = &nor_resource, -}; - -static struct mtd_partition nand_partitions[] = { -#if 0 - /* REVISIT: enable these partitions if you make NAND BOOT work */ - { - .name = "xloader", - .offset = 0, - .size = 64 * 1024, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "bootloader", - .offset = MTDPART_OFS_APPEND, - .size = 256 * 1024, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = 192 * 1024, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 2 * SZ_1M, - }, -#endif - { - .name = "filesystem", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - }, -}; - -#define H3_NAND_RB_GPIO_PIN 10 - -static int nand_dev_ready(struct nand_chip *chip) -{ - return gpio_get_value(H3_NAND_RB_GPIO_PIN); -} - -static struct platform_nand_data nand_platdata = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .nr_partitions = ARRAY_SIZE(nand_partitions), - .partitions = nand_partitions, - .options = NAND_SAMSUNG_LP_OPTIONS, - }, - .ctrl = { - .cmd_ctrl = omap1_nand_cmd_ctl, - .dev_ready = nand_dev_ready, - - }, -}; - -static struct resource nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nand_device = { - .name = "gen_nand", - .id = 0, - .dev = { - .platform_data = &nand_platdata, - }, - .num_resources = 1, - .resource = &nand_resource, -}; - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = OMAP1710_ETHR_START, /* Physical */ - .end = OMAP1710_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static void __init h3_init_smc91x(void) -{ - omap_cfg_reg(W15_1710_GPIO40); - if (gpio_request(40, "SMC91x irq") < 0) { - printk("Error requesting gpio 40 for smc91x irq\n"); - return; - } -} - -#define GPTIMER_BASE 0xFFFB1400 -#define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800)) -#define GPTIMER_REGS_SIZE 0x46 - -static struct resource intlat_resources[] = { - [0] = { - .start = GPTIMER_REGS(0), /* Physical */ - .end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = INT_1610_GPTIMER1, - .end = INT_1610_GPTIMER1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device intlat_device = { - .name = "omap_intlat", - .id = 0, - .num_resources = ARRAY_SIZE(intlat_resources), - .resource = intlat_resources, -}; - -static struct resource h3_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data h3_keymap_data = { - .keymap = h3_keymap, - .keymap_size = ARRAY_SIZE(h3_keymap), -}; - -static struct omap_kp_platform_data h3_kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &h3_keymap_data, - .rep = true, - .delay = 9, - .dbounce = true, -}; - -static struct platform_device h3_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &h3_kp_data, - }, - .num_resources = ARRAY_SIZE(h3_kp_resources), - .resource = h3_kp_resources, -}; - -static struct platform_device h3_lcd_device = { - .name = "lcd_h3", - .id = -1, -}; - -static struct spi_board_info h3_spi_board_info[] __initdata = { - [0] = { - .modalias = "tsc2101", - .bus_num = 2, - .chip_select = 0, - .max_speed_hz = 16000000, - /* .platform_data = &tsc_platform_data, */ - }, -}; - -static const struct gpio_led h3_gpio_led_pins[] = { - { - .name = "h3:red", - .default_trigger = "heartbeat", - .gpio = 3, - }, - { - .name = "h3:green", - .default_trigger = "cpu0", - .gpio = OMAP_MPUIO(4), - }, -}; - -static struct gpio_led_platform_data h3_gpio_led_data = { - .leds = h3_gpio_led_pins, - .num_leds = ARRAY_SIZE(h3_gpio_led_pins), -}; - -static struct platform_device h3_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &h3_gpio_led_data, - }, -}; - -static struct platform_device *devices[] __initdata = { - &nor_device, - &nand_device, - &smc91x_device, - &intlat_device, - &h3_kp_device, - &h3_lcd_device, - &h3_gpio_leds, -}; - -static struct omap_usb_config h3_usb_config __initdata = { - /* usb1 has a Mini-AB port and external isp1301 transceiver */ - .otg = 2, - -#if IS_ENABLED(CONFIG_USB_OMAP) - .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ -#elif IS_ENABLED(CONFIG_USB_OHCI_HCD) - /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ - .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ -#endif - - .pins[1] = 3, -}; - -static const struct omap_lcd_config h3_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static struct i2c_board_info __initdata h3_i2c_board_info[] = { - { - I2C_BOARD_INFO("tps65013", 0x48), - }, - { - I2C_BOARD_INFO("isp1301_omap", 0x2d), - }, -}; - -static void __init h3_init(void) -{ - h3_init_smc91x(); - - /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped - * to address 0 by a dip switch), NAND on CS2B. The NAND driver will - * notice whether a NAND chip is enabled at probe time. - * - * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND - * (which on H2 may be 16bit) on CS3. Try detecting that in code here, - * to avoid probing every possible flash configuration... - */ - nor_resource.end = nor_resource.start = omap_cs3_phys(); - nor_resource.end += SZ_32M - 1; - - nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; - nand_resource.end += SZ_4K - 1; - BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0); - gpio_direction_input(H3_NAND_RB_GPIO_PIN); - - /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ - /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ - omap_cfg_reg(V2_1710_GPIO10); - - /* Mux pins for keypad */ - omap_cfg_reg(F18_1610_KBC0); - omap_cfg_reg(D20_1610_KBC1); - omap_cfg_reg(D19_1610_KBC2); - omap_cfg_reg(E18_1610_KBC3); - omap_cfg_reg(C21_1610_KBC4); - omap_cfg_reg(G18_1610_KBR0); - omap_cfg_reg(F19_1610_KBR1); - omap_cfg_reg(H14_1610_KBR2); - omap_cfg_reg(E20_1610_KBR3); - omap_cfg_reg(E19_1610_KBR4); - omap_cfg_reg(N19_1610_KBR5); - - /* GPIO based LEDs */ - omap_cfg_reg(P18_1610_GPIO3); - omap_cfg_reg(MPUIO4); - - smc91x_resources[1].start = gpio_to_irq(40); - smc91x_resources[1].end = gpio_to_irq(40); - platform_add_devices(devices, ARRAY_SIZE(devices)); - h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO); - spi_register_board_info(h3_spi_board_info, - ARRAY_SIZE(h3_spi_board_info)); - omap_serial_init(); - h3_i2c_board_info[1].irq = gpio_to_irq(14); - omap_register_i2c_bus(1, 100, h3_i2c_board_info, - ARRAY_SIZE(h3_i2c_board_info)); - omap1_usb_init(&h3_usb_config); - h3_mmc_init(); - - omapfb_set_lcd_config(&h3_lcd_config); -} - -MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") - /* Maintainer: Texas Instruments, Inc. */ - .atag_offset = 0x100, - .map_io = omap16xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = h3_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3.h b/arch/arm/mach-omap1/board-h3.h deleted file mode 100644 index 78de535be3c5..000000000000 --- a/arch/arm/mach-omap1/board-h3.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-omap1/board-h3.h - * - * Copyright (C) 2001 RidgeRun, Inc. - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_H3_H -#define __ASM_ARCH_OMAP_H3_H - -#define H3_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) -# define H3_TPS_GPIO_MMC_PWR_EN (H3_TPS_GPIO_BASE + 4) - -extern void h3_mmc_init(void); - -#endif /* __ASM_ARCH_OMAP_H3_H */ diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c deleted file mode 100644 index 291d294b5824..000000000000 --- a/arch/arm/mach-omap1/board-htcherald.c +++ /dev/null @@ -1,585 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * HTC Herald board configuration - * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com> - * Copyright (C) 2009 Wing Linux - * - * Based on the board-htcwizard.c file from the linwizard project: - * Copyright (C) 2006 Unai Uribarri - * Copyright (C) 2008 linwizard.sourceforge.net - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/i2c.h> -#include <linux/platform_data/i2c-gpio.h> -#include <linux/htcpld.h> -#include <linux/leds.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/omapfb.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/soc/ti/omap1-io.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "hardware.h" -#include "omap7xx.h" -#include "mmc.h" -#include "irqs.h" -#include "usb.h" -#include "common.h" - -/* LCD register definition */ -#define OMAP_LCDC_CONTROL (0xfffec000 + 0x00) -#define OMAP_LCDC_STATUS (0xfffec000 + 0x10) -#define OMAP_DMA_LCD_CCR (0xfffee300 + 0xc2) -#define OMAP_DMA_LCD_CTRL (0xfffee300 + 0xc4) -#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) -#define OMAP_LCDC_STAT_DONE (1 << 0) - -/* GPIO definitions for the power button and keyboard slide switch */ -#define HTCHERALD_GPIO_POWER 139 -#define HTCHERALD_GPIO_SLIDE 174 -#define HTCHERALD_GIRQ_BTNS 141 - -/* GPIO definitions for the touchscreen */ -#define HTCHERALD_GPIO_TS 76 - -/* HTCPLD definitions */ - -/* - * CPLD Logic - * - * Chip 3 - 0x03 - * - * Function 7 6 5 4 3 2 1 0 - * ------------------------------------ - * DPAD light x x x x x x x 1 - * SoundDev x x x x 1 x x x - * Screen white 1 x x x x x x x - * MMC power on x x x x x 1 x x - * Happy times (n) 0 x x x x 1 x x - * - * Chip 4 - 0x04 - * - * Function 7 6 5 4 3 2 1 0 - * ------------------------------------ - * Keyboard light x x x x x x x 1 - * LCD Bright (4) x x x x x 1 1 x - * LCD Bright (3) x x x x x 0 1 x - * LCD Bright (2) x x x x x 1 0 x - * LCD Bright (1) x x x x x 0 0 x - * LCD Off x x x x 0 x x x - * LCD image (fb) 1 x x x x x x x - * LCD image (white) 0 x x x x x x x - * Caps lock LED x x 1 x x x x x - * - * Chip 5 - 0x05 - * - * Function 7 6 5 4 3 2 1 0 - * ------------------------------------ - * Red (solid) x x x x x 1 x x - * Red (flash) x x x x x x 1 x - * Green (GSM flash) x x x x 1 x x x - * Green (GSM solid) x x x 1 x x x x - * Green (wifi flash) x x 1 x x x x x - * Blue (bt flash) x 1 x x x x x x - * DPAD Int Enable 1 x x x x x x 0 - * - * (Combinations of the above can be made for different colors.) - * The direction pad interrupt enable must be set each time the - * interrupt is handled. - * - * Chip 6 - 0x06 - * - * Function 7 6 5 4 3 2 1 0 - * ------------------------------------ - * Vibrator x x x x 1 x x x - * Alt LED x x x 1 x x x x - * Screen white 1 x x x x x x x - * Screen white x x 1 x x x x x - * Screen white x 0 x x x x x x - * Enable kbd dpad x x x x x x 0 x - * Happy Times 0 1 0 x x x 0 x - */ - -/* - * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account - * for the 16 MPUIO lines. - */ -#define HTCPLD_GPIO_START_OFFSET (OMAP_MAX_GPIO_LINES + 16) -#define HTCPLD_IRQ(chip, offset) (OMAP_IRQ_END + 8 * (chip) + (offset)) -#define HTCPLD_BASE(chip, offset) \ - (HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset)) - -#define HTCPLD_GPIO_LED_DPAD HTCPLD_BASE(0, 0) -#define HTCPLD_GPIO_LED_KBD HTCPLD_BASE(1, 0) -#define HTCPLD_GPIO_LED_CAPS HTCPLD_BASE(1, 5) -#define HTCPLD_GPIO_LED_RED_FLASH HTCPLD_BASE(2, 1) -#define HTCPLD_GPIO_LED_RED_SOLID HTCPLD_BASE(2, 2) -#define HTCPLD_GPIO_LED_GREEN_FLASH HTCPLD_BASE(2, 3) -#define HTCPLD_GPIO_LED_GREEN_SOLID HTCPLD_BASE(2, 4) -#define HTCPLD_GPIO_LED_WIFI HTCPLD_BASE(2, 5) -#define HTCPLD_GPIO_LED_BT HTCPLD_BASE(2, 6) -#define HTCPLD_GPIO_LED_VIBRATE HTCPLD_BASE(3, 3) -#define HTCPLD_GPIO_LED_ALT HTCPLD_BASE(3, 4) - -#define HTCPLD_GPIO_RIGHT_KBD HTCPLD_BASE(6, 7) -#define HTCPLD_GPIO_UP_KBD HTCPLD_BASE(6, 6) -#define HTCPLD_GPIO_LEFT_KBD HTCPLD_BASE(6, 5) -#define HTCPLD_GPIO_DOWN_KBD HTCPLD_BASE(6, 4) - -#define HTCPLD_GPIO_RIGHT_DPAD HTCPLD_BASE(7, 7) -#define HTCPLD_GPIO_UP_DPAD HTCPLD_BASE(7, 6) -#define HTCPLD_GPIO_LEFT_DPAD HTCPLD_BASE(7, 5) -#define HTCPLD_GPIO_DOWN_DPAD HTCPLD_BASE(7, 4) -#define HTCPLD_GPIO_ENTER_DPAD HTCPLD_BASE(7, 3) - -/* Chip 5 */ -#define HTCPLD_IRQ_RIGHT_KBD HTCPLD_IRQ(0, 7) -#define HTCPLD_IRQ_UP_KBD HTCPLD_IRQ(0, 6) -#define HTCPLD_IRQ_LEFT_KBD HTCPLD_IRQ(0, 5) -#define HTCPLD_IRQ_DOWN_KBD HTCPLD_IRQ(0, 4) - -/* Chip 6 */ -#define HTCPLD_IRQ_RIGHT_DPAD HTCPLD_IRQ(1, 7) -#define HTCPLD_IRQ_UP_DPAD HTCPLD_IRQ(1, 6) -#define HTCPLD_IRQ_LEFT_DPAD HTCPLD_IRQ(1, 5) -#define HTCPLD_IRQ_DOWN_DPAD HTCPLD_IRQ(1, 4) -#define HTCPLD_IRQ_ENTER_DPAD HTCPLD_IRQ(1, 3) - -/* Keyboard definition */ - -static const unsigned int htc_herald_keymap[] = { - KEY(0, 0, KEY_RECORD), /* Mail button */ - KEY(1, 0, KEY_CAMERA), /* Camera */ - KEY(2, 0, KEY_PHONE), /* Send key */ - KEY(3, 0, KEY_VOLUMEUP), /* Volume up */ - KEY(4, 0, KEY_F2), /* Right bar (landscape) */ - KEY(5, 0, KEY_MAIL), /* Win key (portrait) */ - KEY(6, 0, KEY_DIRECTORY), /* Right bar (portrait) */ - KEY(0, 1, KEY_LEFTCTRL), /* Windows key */ - KEY(1, 1, KEY_COMMA), - KEY(2, 1, KEY_M), - KEY(3, 1, KEY_K), - KEY(4, 1, KEY_SLASH), /* OK key */ - KEY(5, 1, KEY_I), - KEY(6, 1, KEY_U), - KEY(0, 2, KEY_LEFTALT), - KEY(1, 2, KEY_TAB), - KEY(2, 2, KEY_N), - KEY(3, 2, KEY_J), - KEY(4, 2, KEY_ENTER), - KEY(5, 2, KEY_H), - KEY(6, 2, KEY_Y), - KEY(0, 3, KEY_SPACE), - KEY(1, 3, KEY_L), - KEY(2, 3, KEY_B), - KEY(3, 3, KEY_V), - KEY(4, 3, KEY_BACKSPACE), - KEY(5, 3, KEY_G), - KEY(6, 3, KEY_T), - KEY(0, 4, KEY_CAPSLOCK), /* Shift */ - KEY(1, 4, KEY_C), - KEY(2, 4, KEY_F), - KEY(3, 4, KEY_R), - KEY(4, 4, KEY_O), - KEY(5, 4, KEY_E), - KEY(6, 4, KEY_D), - KEY(0, 5, KEY_X), - KEY(1, 5, KEY_Z), - KEY(2, 5, KEY_S), - KEY(3, 5, KEY_W), - KEY(4, 5, KEY_P), - KEY(5, 5, KEY_Q), - KEY(6, 5, KEY_A), - KEY(0, 6, KEY_CONNECT), /* Voice button */ - KEY(2, 6, KEY_CANCEL), /* End key */ - KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */ - KEY(4, 6, KEY_F1), /* Left bar (landscape) */ - KEY(5, 6, KEY_WWW), /* OK button (portrait) */ - KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */ -}; - -static const struct matrix_keymap_data htc_herald_keymap_data = { - .keymap = htc_herald_keymap, - .keymap_size = ARRAY_SIZE(htc_herald_keymap), -}; - -static struct omap_kp_platform_data htcherald_kp_data = { - .rows = 7, - .cols = 7, - .delay = 20, - .rep = true, - .keymap_data = &htc_herald_keymap_data, -}; - -static struct resource kp_resources[] = { - [0] = { - .start = INT_7XX_MPUIO_KEYPAD, - .end = INT_7XX_MPUIO_KEYPAD, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &htcherald_kp_data, - }, - .num_resources = ARRAY_SIZE(kp_resources), - .resource = kp_resources, -}; - -/* GPIO buttons for keyboard slide and power button */ -static struct gpio_keys_button herald_gpio_keys_table[] = { - {BTN_0, HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20}, - {SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW, 1, 20}, - - {KEY_LEFT, HTCPLD_GPIO_LEFT_KBD, 1, "LEFT", EV_KEY, 1, 20}, - {KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20}, - {KEY_UP, HTCPLD_GPIO_UP_KBD, 1, "UP", EV_KEY, 1, 20}, - {KEY_DOWN, HTCPLD_GPIO_DOWN_KBD, 1, "DOWN", EV_KEY, 1, 20}, - - {KEY_LEFT, HTCPLD_GPIO_LEFT_DPAD, 1, "DLEFT", EV_KEY, 1, 20}, - {KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD, 1, "DRIGHT", EV_KEY, 1, 20}, - {KEY_UP, HTCPLD_GPIO_UP_DPAD, 1, "DUP", EV_KEY, 1, 20}, - {KEY_DOWN, HTCPLD_GPIO_DOWN_DPAD, 1, "DDOWN", EV_KEY, 1, 20}, - {KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD, 1, "DENTER", EV_KEY, 1, 20}, -}; - -static struct gpio_keys_platform_data herald_gpio_keys_data = { - .buttons = herald_gpio_keys_table, - .nbuttons = ARRAY_SIZE(herald_gpio_keys_table), - .rep = true, -}; - -static struct platform_device herald_gpiokeys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &herald_gpio_keys_data, - }, -}; - -/* LEDs for the Herald. These connect to the HTCPLD GPIO device. */ -static const struct gpio_led gpio_leds[] = { - {"dpad", NULL, HTCPLD_GPIO_LED_DPAD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"kbd", NULL, HTCPLD_GPIO_LED_KBD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"vibrate", NULL, HTCPLD_GPIO_LED_VIBRATE, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"red_solid", "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"red_flash", NULL, HTCPLD_GPIO_LED_RED_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"wifi", NULL, HTCPLD_GPIO_LED_WIFI, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"bt", NULL, HTCPLD_GPIO_LED_BT, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"caps", NULL, HTCPLD_GPIO_LED_CAPS, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, - {"alt", NULL, HTCPLD_GPIO_LED_ALT, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, -}; - -static struct gpio_led_platform_data gpio_leds_data = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device gpio_leds_device = { - .name = "leds-gpio", - .id = 0, - .dev = { - .platform_data = &gpio_leds_data, - }, -}; - -/* HTC PLD chips */ - -static struct resource htcpld_resources[] = { - [0] = { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct htcpld_chip_platform_data htcpld_chips[] = { - [0] = { - .addr = 0x03, - .reset = 0x04, - .num_gpios = 8, - .gpio_out_base = HTCPLD_BASE(0, 0), - .gpio_in_base = HTCPLD_BASE(4, 0), - }, - [1] = { - .addr = 0x04, - .reset = 0x8e, - .num_gpios = 8, - .gpio_out_base = HTCPLD_BASE(1, 0), - .gpio_in_base = HTCPLD_BASE(5, 0), - }, - [2] = { - .addr = 0x05, - .reset = 0x80, - .num_gpios = 8, - .gpio_out_base = HTCPLD_BASE(2, 0), - .gpio_in_base = HTCPLD_BASE(6, 0), - .irq_base = HTCPLD_IRQ(0, 0), - .num_irqs = 8, - }, - [3] = { - .addr = 0x06, - .reset = 0x40, - .num_gpios = 8, - .gpio_out_base = HTCPLD_BASE(3, 0), - .gpio_in_base = HTCPLD_BASE(7, 0), - .irq_base = HTCPLD_IRQ(1, 0), - .num_irqs = 8, - }, -}; - -static struct htcpld_core_platform_data htcpld_pfdata = { - .i2c_adapter_id = 1, - - .chip = htcpld_chips, - .num_chip = ARRAY_SIZE(htcpld_chips), -}; - -static struct platform_device htcpld_device = { - .name = "i2c-htcpld", - .id = -1, - .resource = htcpld_resources, - .num_resources = ARRAY_SIZE(htcpld_resources), - .dev = { - .platform_data = &htcpld_pfdata, - }, -}; - -/* USB Device */ -static struct omap_usb_config htcherald_usb_config __initdata = { - .otg = 0, - .register_host = 0, - .register_dev = 1, - .hmc_mode = 4, - .pins[0] = 2, -}; - -/* LCD Device resources */ -static const struct omap_lcd_config htcherald_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static struct platform_device lcd_device = { - .name = "lcd_htcherald", - .id = -1, -}; - -/* MMC Card */ -#if IS_ENABLED(CONFIG_MMC_OMAP) -static struct omap_mmc_platform_data htc_mmc1_data = { - .nr_slots = 1, - .switch_slot = NULL, - .slots[0] = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .name = "mmcblk", - .nomux = 1, - .wires = 4, - .switch_pin = -1, - }, -}; - -static struct omap_mmc_platform_data *htc_mmc_data[1]; -#endif - - -/* Platform devices for the Herald */ -static struct platform_device *devices[] __initdata = { - &kp_device, - &lcd_device, - &htcpld_device, - &gpio_leds_device, - &herald_gpiokeys_device, -}; - -/* - * Touchscreen - */ -static const struct ads7846_platform_data htcherald_ts_platform_data = { - .model = 7846, - .keep_vref_on = 1, - .x_plate_ohms = 496, - .gpio_pendown = HTCHERALD_GPIO_TS, - .pressure_max = 10000, - .pressure_min = 5000, - .x_min = 528, - .x_max = 3760, - .y_min = 624, - .y_max = 3760, -}; - -static struct spi_board_info __initdata htcherald_spi_board_info[] = { - { - .modalias = "ads7846", - .platform_data = &htcherald_ts_platform_data, - .max_speed_hz = 2500000, - .bus_num = 2, - .chip_select = 1, - } -}; - -/* - * Init functions from here on - */ - -static void __init htcherald_lcd_init(void) -{ - u32 reg; - unsigned int tries = 200; - - /* disable controller if active */ - reg = omap_readl(OMAP_LCDC_CONTROL); - if (reg & OMAP_LCDC_CTRL_LCD_EN) { - reg &= ~OMAP_LCDC_CTRL_LCD_EN; - omap_writel(reg, OMAP_LCDC_CONTROL); - - /* wait for end of frame */ - while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) { - tries--; - if (!tries) - break; - } - if (!tries) - pr_err("Timeout waiting for end of frame -- LCD may not be available\n"); - - /* turn off DMA */ - reg = omap_readw(OMAP_DMA_LCD_CCR); - reg &= ~(1 << 7); - omap_writew(reg, OMAP_DMA_LCD_CCR); - - reg = omap_readw(OMAP_DMA_LCD_CTRL); - reg &= ~(1 << 8); - omap_writew(reg, OMAP_DMA_LCD_CTRL); - } -} - -static void __init htcherald_map_io(void) -{ - omap7xx_map_io(); - - /* - * The LCD panel must be disabled and DMA turned off here, as doing - * it later causes the LCD never to reinitialize. - */ - htcherald_lcd_init(); - - printk(KERN_INFO "htcherald_map_io done.\n"); -} - -static void __init htcherald_disable_watchdog(void) -{ - /* Disable watchdog if running */ - if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) { - /* - * disable a potentially running watchdog timer before - * it kills us. - */ - printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n"); - omap_writel(0xF5, OMAP_WDT_TIMER_MODE); - omap_writel(0xA0, OMAP_WDT_TIMER_MODE); - } -} - -#define HTCHERALD_GPIO_USB_EN1 33 -#define HTCHERALD_GPIO_USB_EN2 73 -#define HTCHERALD_GPIO_USB_DM 35 -#define HTCHERALD_GPIO_USB_DP 36 - -static void __init htcherald_usb_enable(void) -{ - unsigned int tries = 20; - unsigned int value = 0; - - /* Request the GPIOs we need to control here */ - if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0) - goto err1; - - if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0) - goto err2; - - if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0) - goto err3; - - if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0) - goto err4; - - /* force USB_EN GPIO to 0 */ - do { - /* output low */ - gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0); - } while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 && - --tries); - - if (value == 1) - printk(KERN_WARNING "Unable to reset USB, trying to continue\n"); - - gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */ - gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */ - gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */ - - goto done; - -err4: - gpio_free(HTCHERALD_GPIO_USB_DM); -err3: - gpio_free(HTCHERALD_GPIO_USB_EN2); -err2: - gpio_free(HTCHERALD_GPIO_USB_EN1); -err1: - printk(KERN_ERR "Unabled to request GPIO for USB\n"); -done: - printk(KERN_INFO "USB setup complete.\n"); -} - -static void __init htcherald_init(void) -{ - printk(KERN_INFO "HTC Herald init.\n"); - - /* Do board initialization before we register all the devices */ - htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS); - htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - htcherald_disable_watchdog(); - - htcherald_usb_enable(); - omap1_usb_init(&htcherald_usb_config); - - htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS); - spi_register_board_info(htcherald_spi_board_info, - ARRAY_SIZE(htcherald_spi_board_info)); - - omap_register_i2c_bus(1, 100, NULL, 0); - -#if IS_ENABLED(CONFIG_MMC_OMAP) - htc_mmc_data[0] = &htc_mmc1_data; - omap1_init_mmc(htc_mmc_data, 1); -#endif - - omapfb_set_lcd_config(&htcherald_lcd_config); -} - -MACHINE_START(HERALD, "HTC Herald") - /* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */ - /* Maintainer: wing-linux.sourceforge.net */ - .atag_offset = 0x100, - .map_io = htcherald_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = htcherald_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c deleted file mode 100644 index 6deb4ca079e9..000000000000 --- a/arch/arm/mach-omap1/board-innovator.c +++ /dev/null @@ -1,481 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-innovator.c - * - * Board specific inits for OMAP-1510 and OMAP-1610 Innovator - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> -#include <linux/platform_data/keypad-omap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "usb.h" -#include "iomap.h" -#include "common.h" -#include "mmc.h" - -/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ -#define INNOVATOR1610_ETHR_START 0x04000300 - -static const unsigned int innovator_keymap[] = { - KEY(0, 0, KEY_F1), - KEY(3, 0, KEY_DOWN), - KEY(1, 1, KEY_F2), - KEY(2, 1, KEY_RIGHT), - KEY(0, 2, KEY_F3), - KEY(1, 2, KEY_F4), - KEY(2, 2, KEY_UP), - KEY(2, 3, KEY_ENTER), - KEY(3, 3, KEY_LEFT), -}; - -static struct mtd_partition innovator_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* rest of flash1 is a file system */ - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = SZ_16M - SZ_2M - 2 * SZ_128K, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data innovator_flash_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = innovator_partitions, - .nr_parts = ARRAY_SIZE(innovator_partitions), -}; - -static struct resource innovator_flash_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device innovator_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &innovator_flash_data, - }, - .num_resources = 1, - .resource = &innovator_flash_resource, -}; - -static struct resource innovator_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data innovator_keymap_data = { - .keymap = innovator_keymap, - .keymap_size = ARRAY_SIZE(innovator_keymap), -}; - -static struct omap_kp_platform_data innovator_kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &innovator_keymap_data, - .delay = 4, -}; - -static struct platform_device innovator_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &innovator_kp_data, - }, - .num_resources = ARRAY_SIZE(innovator_kp_resources), - .resource = innovator_kp_resources, -}; - -static struct smc91x_platdata innovator_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -#ifdef CONFIG_ARCH_OMAP15XX - -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> - - -/* Only FPGA needs to be mapped here. All others are done with ioremap */ -static struct map_desc innovator1510_io_desc[] __initdata = { - { - .virtual = OMAP1510_FPGA_BASE, - .pfn = __phys_to_pfn(OMAP1510_FPGA_START), - .length = OMAP1510_FPGA_SIZE, - .type = MT_DEVICE - } -}; - -static struct resource innovator1510_smc91x_resources[] = { - [0] = { - .start = OMAP1510_FPGA_ETHR_START, /* Physical */ - .end = OMAP1510_FPGA_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP1510_INT_ETHER, - .end = OMAP1510_INT_ETHER, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device innovator1510_smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &innovator_smc91x_info, - }, - .num_resources = ARRAY_SIZE(innovator1510_smc91x_resources), - .resource = innovator1510_smc91x_resources, -}; - -static struct platform_device innovator1510_lcd_device = { - .name = "lcd_inn1510", - .id = -1, - .dev = { - .platform_data = (void __force *)OMAP1510_FPGA_LCD_PANEL_CONTROL, - } -}; - -static struct platform_device innovator1510_spi_device = { - .name = "spi_inn1510", - .id = -1, -}; - -static struct platform_device *innovator1510_devices[] __initdata = { - &innovator_flash_device, - &innovator1510_smc91x_device, - &innovator_kp_device, - &innovator1510_lcd_device, - &innovator1510_spi_device, -}; - -static int innovator_get_pendown_state(void) -{ - return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); -} - -static const struct ads7846_platform_data innovator1510_ts_info = { - .model = 7846, - .vref_delay_usecs = 100, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .get_pendown_state = innovator_get_pendown_state, -}; - -static struct spi_board_info __initdata innovator1510_boardinfo[] = { { - /* FPGA (bus "10") CS0 has an ads7846e */ - .modalias = "ads7846", - .platform_data = &innovator1510_ts_info, - .irq = OMAP1510_INT_FPGA_TS, - .max_speed_hz = 120000 /* max sample rate at 3V */ - * 26 /* command + data + overhead */, - .bus_num = 10, - .chip_select = 0, -} }; - -#endif /* CONFIG_ARCH_OMAP15XX */ - -#ifdef CONFIG_ARCH_OMAP16XX - -static struct resource innovator1610_smc91x_resources[] = { - [0] = { - .start = INNOVATOR1610_ETHR_START, /* Physical */ - .end = INNOVATOR1610_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device innovator1610_smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &innovator_smc91x_info, - }, - .num_resources = ARRAY_SIZE(innovator1610_smc91x_resources), - .resource = innovator1610_smc91x_resources, -}; - -static struct platform_device innovator1610_lcd_device = { - .name = "inn1610_lcd", - .id = -1, -}; - -static struct platform_device *innovator1610_devices[] __initdata = { - &innovator_flash_device, - &innovator1610_smc91x_device, - &innovator_kp_device, - &innovator1610_lcd_device, -}; - -#endif /* CONFIG_ARCH_OMAP16XX */ - -static void __init innovator_init_smc91x(void) -{ - if (cpu_is_omap1510()) { - __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1, - OMAP1510_FPGA_RST); - udelay(750); - } else { - if (gpio_request(0, "SMC91x irq") < 0) { - printk("Error requesting gpio 0 for smc91x irq\n"); - return; - } - } -} - -#ifdef CONFIG_ARCH_OMAP15XX -/* - * Board specific gang-switched transceiver power on/off. - */ -static int innovator_omap_ohci_transceiver_power(int on) -{ - if (on) - __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) - | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), - INNOVATOR_FPGA_CAM_USB_CONTROL); - else - __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) - & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), - INNOVATOR_FPGA_CAM_USB_CONTROL); - - return 0; -} - -static struct omap_usb_config innovator1510_usb_config __initdata = { - /* for bundled non-standard host and peripheral cables */ - .hmc_mode = 4, - - .register_host = 1, - .pins[1] = 6, - .pins[2] = 6, /* Conflicts with UART2 */ - - .register_dev = 1, - .pins[0] = 2, - - .transceiver_power = innovator_omap_ohci_transceiver_power, -}; - -static const struct omap_lcd_config innovator1510_lcd_config __initconst = { - .ctrl_name = "internal", -}; -#endif - -#ifdef CONFIG_ARCH_OMAP16XX -static struct omap_usb_config h2_usb_config __initdata = { - /* usb1 has a Mini-AB port and external isp1301 transceiver */ - .otg = 2, - -#if IS_ENABLED(CONFIG_USB_OMAP) - .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ - /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ -#elif IS_ENABLED(CONFIG_USB_OHCI_HCD) - /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ - .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ -#endif - - .pins[1] = 3, -}; - -static const struct omap_lcd_config innovator1610_lcd_config __initconst = { - .ctrl_name = "internal", -}; -#endif - -#if IS_ENABLED(CONFIG_MMC_OMAP) - -static int mmc_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - if (power_on) - __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3), - OMAP1510_FPGA_POWER); - else - __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3), - OMAP1510_FPGA_POWER); - - return 0; -} - -/* - * Innovator could use the following functions tested: - * - mmc_get_wp that uses OMAP_MPUIO(3) - * - mmc_get_cover_state that uses FPGA F4 UIO43 - */ -static struct omap_mmc_platform_data mmc1_data = { - .nr_slots = 1, - .slots[0] = { - .set_power = mmc_set_power, - .wires = 4, - .name = "mmcblk", - }, -}; - -static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC]; - -static void __init innovator_mmc_init(void) -{ - mmc_data[0] = &mmc1_data; - omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC); -} - -#else -static inline void innovator_mmc_init(void) -{ -} -#endif - -static void __init innovator_init(void) -{ - if (cpu_is_omap1510()) - omap1510_fpga_init_irq(); - innovator_init_smc91x(); - -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { - unsigned char reg; - - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - reg = __raw_readb(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM1_EN; - __raw_writeb(reg, OMAP1510_FPGA_POWER); - udelay(10); - - reg = __raw_readb(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM2_EN; - __raw_writeb(reg, OMAP1510_FPGA_POWER); - udelay(10); - - platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); - spi_register_board_info(innovator1510_boardinfo, - ARRAY_SIZE(innovator1510_boardinfo)); - } -#endif -#ifdef CONFIG_ARCH_OMAP16XX - if (!cpu_is_omap1510()) { - innovator1610_smc91x_resources[1].start = gpio_to_irq(0); - innovator1610_smc91x_resources[1].end = gpio_to_irq(0); - platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices)); - } -#endif - -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { - omap1_usb_init(&innovator1510_usb_config); - omapfb_set_lcd_config(&innovator1510_lcd_config); - } -#endif -#ifdef CONFIG_ARCH_OMAP16XX - if (cpu_is_omap1610()) { - omap1_usb_init(&h2_usb_config); - omapfb_set_lcd_config(&innovator1610_lcd_config); - } -#endif - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); - innovator_mmc_init(); -} - -/* - * REVISIT: Assume 15xx for now, we don't want to do revision check - * until later on. The right way to fix this is to set up a different - * machine_id for 16xx Innovator, or use device tree. - */ -static void __init innovator_map_io(void) -{ -#ifdef CONFIG_ARCH_OMAP15XX - omap15xx_map_io(); - - iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); - udelay(10); /* Delay needed for FPGA */ - - /* Dump the Innovator FPGA rev early - useful info for support. */ - pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", - __raw_readb(OMAP1510_FPGA_REV_HIGH), - __raw_readb(OMAP1510_FPGA_REV_LOW), - __raw_readb(OMAP1510_FPGA_BOARD_REV)); -#endif -} - -MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = innovator_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = innovator_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c deleted file mode 100644 index 479ab9be784d..000000000000 --- a/arch/arm/mach-omap1/board-nand.c +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-nand.c - * - * Common OMAP1 board NAND code - * - * Copyright (C) 2004, 2012 Texas Instruments, Inc. - * Copyright (C) 2002 MontaVista Software, Inc. - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com - */ -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> - -#include "common.h" - -void omap1_nand_cmd_ctl(struct nand_chip *this, int cmd, unsigned int ctrl) -{ - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - - writeb(cmd, this->legacy.IO_ADDR_W + mask); -} - diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c deleted file mode 100644 index 537f0e6a2ff7..000000000000 --- a/arch/arm/mach-omap1/board-palmtt.c +++ /dev/null @@ -1,285 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-palmtt.c - * - * Modified from board-palmtt2.c - * - * Modified and amended for Palm Tungsten|T - * by Marek Vasut <marek.vasut@gmail.com> - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/notifier.h> -#include <linux/clk.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/leds.h> -#include <linux/omapfb.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/omap-dma.h> -#include <linux/platform_data/omap1_bl.h> -#include <linux/platform_data/leds-omap.h> -#include <linux/platform_data/keypad-omap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "flash.h" -#include "mux.h" -#include "hardware.h" -#include "usb.h" -#include "common.h" - -#define PALMTT_USBDETECT_GPIO 0 -#define PALMTT_CABLE_GPIO 1 -#define PALMTT_LED_GPIO 3 -#define PALMTT_PENIRQ_GPIO 6 -#define PALMTT_MMC_WP_GPIO 8 -#define PALMTT_HDQ_GPIO 11 - -static const unsigned int palmtt_keymap[] = { - KEY(0, 0, KEY_ESC), - KEY(1, 0, KEY_SPACE), - KEY(2, 0, KEY_LEFTCTRL), - KEY(3, 0, KEY_TAB), - KEY(4, 0, KEY_ENTER), - KEY(0, 1, KEY_LEFT), - KEY(1, 1, KEY_DOWN), - KEY(2, 1, KEY_UP), - KEY(3, 1, KEY_RIGHT), - KEY(0, 2, KEY_SLEEP), - KEY(4, 2, KEY_Y), -}; - -static struct mtd_partition palmtt_partitions[] = { - { - .name = "write8k", - .offset = 0, - .size = SZ_8K, - .mask_flags = 0, - }, - { - .name = "PalmOS-BootLoader(ro)", - .offset = SZ_8K, - .size = 7 * SZ_8K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "u-boot", - .offset = MTDPART_OFS_APPEND, - .size = 8 * SZ_8K, - .mask_flags = 0, - }, - { - .name = "PalmOS-FS(ro)", - .offset = MTDPART_OFS_APPEND, - .size = 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "u-boot(rez)", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0 - }, - { - .name = "empty", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data palmtt_flash_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = palmtt_partitions, - .nr_parts = ARRAY_SIZE(palmtt_partitions), -}; - -static struct resource palmtt_flash_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device palmtt_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &palmtt_flash_data, - }, - .num_resources = 1, - .resource = &palmtt_flash_resource, -}; - -static struct resource palmtt_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data palmtt_keymap_data = { - .keymap = palmtt_keymap, - .keymap_size = ARRAY_SIZE(palmtt_keymap), -}; - -static struct omap_kp_platform_data palmtt_kp_data = { - .rows = 6, - .cols = 3, - .keymap_data = &palmtt_keymap_data, -}; - -static struct platform_device palmtt_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &palmtt_kp_data, - }, - .num_resources = ARRAY_SIZE(palmtt_kp_resources), - .resource = palmtt_kp_resources, -}; - -static struct platform_device palmtt_lcd_device = { - .name = "lcd_palmtt", - .id = -1, -}; - -static struct platform_device palmtt_spi_device = { - .name = "spi_palmtt", - .id = -1, -}; - -static struct omap_backlight_config palmtt_backlight_config = { - .default_intensity = 0xa0, -}; - -static struct platform_device palmtt_backlight_device = { - .name = "omap-bl", - .id = -1, - .dev = { - .platform_data= &palmtt_backlight_config, - }, -}; - -static struct omap_led_config palmtt_led_config[] = { - { - .cdev = { - .name = "palmtt:led0", - }, - .gpio = PALMTT_LED_GPIO, - }, -}; - -static struct omap_led_platform_data palmtt_led_data = { - .nr_leds = ARRAY_SIZE(palmtt_led_config), - .leds = palmtt_led_config, -}; - -static struct platform_device palmtt_led_device = { - .name = "omap-led", - .id = -1, - .dev = { - .platform_data = &palmtt_led_data, - }, -}; - -static struct platform_device *palmtt_devices[] __initdata = { - &palmtt_flash_device, - &palmtt_kp_device, - &palmtt_lcd_device, - &palmtt_spi_device, - &palmtt_backlight_device, - &palmtt_led_device, -}; - -static int palmtt_get_pendown_state(void) -{ - return !gpio_get_value(6); -} - -static const struct ads7846_platform_data palmtt_ts_info = { - .model = 7846, - .vref_delay_usecs = 100, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .get_pendown_state = palmtt_get_pendown_state, -}; - -static struct spi_board_info __initdata palmtt_boardinfo[] = { - { - /* MicroWire (bus 2) CS0 has an ads7846e */ - .modalias = "ads7846", - .platform_data = &palmtt_ts_info, - .max_speed_hz = 120000 /* max sample rate at 3V */ - * 26 /* command + data + overhead */, - .bus_num = 2, - .chip_select = 0, - } -}; - -static struct omap_usb_config palmtt_usb_config __initdata = { - .register_dev = 1, - .hmc_mode = 0, - .pins[0] = 2, -}; - -static const struct omap_lcd_config palmtt_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static void __init omap_mpu_wdt_mode(int mode) { - if (mode) - omap_writew(0x8000, OMAP_WDT_TIMER_MODE); - else { - omap_writew(0x00f5, OMAP_WDT_TIMER_MODE); - omap_writew(0x00a0, OMAP_WDT_TIMER_MODE); - } -} - -static void __init omap_palmtt_init(void) -{ - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - omap_mpu_wdt_mode(0); - - platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices)); - - palmtt_boardinfo[0].irq = gpio_to_irq(6); - spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); - omap_serial_init(); - omap1_usb_init(&palmtt_usb_config); - omap_register_i2c_bus(1, 100, NULL, 0); - - omapfb_set_lcd_config(&palmtt_lcd_config); -} - -MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") - .atag_offset = 0x100, - .map_io = omap15xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = omap_palmtt_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c deleted file mode 100644 index 47f08ae5a2f3..000000000000 --- a/arch/arm/mach-omap1/board-palmz71.c +++ /dev/null @@ -1,300 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-palmz71.c - * - * Modified from board-generic.c - * - * Support for the Palm Zire71 PDA. - * - * Original version : Laurent Gonzalez - * - * Modified for zire71 : Marek Vasut - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/notifier.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/omapfb.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/platform_data/omap1_bl.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/omap-dma.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "flash.h" -#include "mux.h" -#include "hardware.h" -#include "usb.h" -#include "common.h" - -#define PALMZ71_USBDETECT_GPIO 0 -#define PALMZ71_PENIRQ_GPIO 6 -#define PALMZ71_MMC_WP_GPIO 8 -#define PALMZ71_HDQ_GPIO 11 - -#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1) -#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2) -#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) -#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) - -static const unsigned int palmz71_keymap[] = { - KEY(0, 0, KEY_F1), - KEY(1, 0, KEY_F2), - KEY(2, 0, KEY_F3), - KEY(3, 0, KEY_F4), - KEY(4, 0, KEY_POWER), - KEY(0, 1, KEY_LEFT), - KEY(1, 1, KEY_DOWN), - KEY(2, 1, KEY_UP), - KEY(3, 1, KEY_RIGHT), - KEY(4, 1, KEY_ENTER), - KEY(0, 2, KEY_CAMERA), -}; - -static const struct matrix_keymap_data palmz71_keymap_data = { - .keymap = palmz71_keymap, - .keymap_size = ARRAY_SIZE(palmz71_keymap), -}; - -static struct omap_kp_platform_data palmz71_kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &palmz71_keymap_data, - .rep = true, - .delay = 80, -}; - -static struct resource palmz71_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device palmz71_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &palmz71_kp_data, - }, - .num_resources = ARRAY_SIZE(palmz71_kp_resources), - .resource = palmz71_kp_resources, -}; - -static struct mtd_partition palmz71_rom_partitions[] = { - /* PalmOS "Small ROM", contains the bootloader and the debugger */ - { - .name = "smallrom", - .offset = 0, - .size = 0xa000, - .mask_flags = MTD_WRITEABLE, - }, - /* PalmOS "Big ROM", a filesystem with all the OS code and data */ - { - .name = "bigrom", - .offset = SZ_128K, - /* - * 0x5f0000 bytes big in the multi-language ("EFIGS") version, - * 0x7b0000 bytes in the English-only ("enUS") version. - */ - .size = 0x7b0000, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data palmz71_rom_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = palmz71_rom_partitions, - .nr_parts = ARRAY_SIZE(palmz71_rom_partitions), -}; - -static struct resource palmz71_rom_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device palmz71_rom_device = { - .name = "physmap-flash", - .id = -1, - .dev = { - .platform_data = &palmz71_rom_data, - }, - .num_resources = 1, - .resource = &palmz71_rom_resource, -}; - -static struct platform_device palmz71_lcd_device = { - .name = "lcd_palmz71", - .id = -1, -}; - -static struct platform_device palmz71_spi_device = { - .name = "spi_palmz71", - .id = -1, -}; - -static struct omap_backlight_config palmz71_backlight_config = { - .default_intensity = 0xa0, -}; - -static struct platform_device palmz71_backlight_device = { - .name = "omap-bl", - .id = -1, - .dev = { - .platform_data = &palmz71_backlight_config, - }, -}; - -static struct platform_device *devices[] __initdata = { - &palmz71_rom_device, - &palmz71_kp_device, - &palmz71_lcd_device, - &palmz71_spi_device, - &palmz71_backlight_device, -}; - -static int -palmz71_get_pendown_state(void) -{ - return !gpio_get_value(PALMZ71_PENIRQ_GPIO); -} - -static const struct ads7846_platform_data palmz71_ts_info = { - .model = 7846, - .vref_delay_usecs = 100, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .get_pendown_state = palmz71_get_pendown_state, -}; - -static struct spi_board_info __initdata palmz71_boardinfo[] = { { - /* MicroWire (bus 2) CS0 has an ads7846e */ - .modalias = "ads7846", - .platform_data = &palmz71_ts_info, - .max_speed_hz = 120000 /* max sample rate at 3V */ - * 26 /* command + data + overhead */, - .bus_num = 2, - .chip_select = 0, -} }; - -static struct omap_usb_config palmz71_usb_config __initdata = { - .register_dev = 1, /* Mini-B only receptacle */ - .hmc_mode = 0, - .pins[0] = 2, -}; - -static const struct omap_lcd_config palmz71_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static irqreturn_t -palmz71_powercable(int irq, void *dev_id) -{ - if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) { - printk(KERN_INFO "PM: Power cable connected\n"); - irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - IRQ_TYPE_EDGE_FALLING); - } else { - printk(KERN_INFO "PM: Power cable disconnected\n"); - irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - IRQ_TYPE_EDGE_RISING); - } - return IRQ_HANDLED; -} - -static void __init -omap_mpu_wdt_mode(int mode) -{ - if (mode) - omap_writew(0x8000, OMAP_WDT_TIMER_MODE); - else { - omap_writew(0x00f5, OMAP_WDT_TIMER_MODE); - omap_writew(0x00a0, OMAP_WDT_TIMER_MODE); - } -} - -static void __init -palmz71_gpio_setup(int early) -{ - if (early) { - /* Only set GPIO1 so we have a working serial */ - gpio_direction_output(1, 1); - } else { - /* Set MMC/SD host WP pin as input */ - if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) { - printk(KERN_ERR "Could not reserve WP GPIO!\n"); - return; - } - gpio_direction_input(PALMZ71_MMC_WP_GPIO); - - /* Monitor the Power-cable-connected signal */ - if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) { - printk(KERN_ERR - "Could not reserve cable signal GPIO!\n"); - return; - } - gpio_direction_input(PALMZ71_USBDETECT_GPIO); - if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO), - palmz71_powercable, 0, "palmz71-cable", NULL)) - printk(KERN_ERR - "IRQ request for power cable failed!\n"); - palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL); - } -} - -static void __init -omap_palmz71_init(void) -{ - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - palmz71_gpio_setup(1); - omap_mpu_wdt_mode(0); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO); - spi_register_board_info(palmz71_boardinfo, - ARRAY_SIZE(palmz71_boardinfo)); - omap1_usb_init(&palmz71_usb_config); - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); - palmz71_gpio_setup(0); - - omapfb_set_lcd_config(&palmz71_lcd_config); -} - -MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") - .atag_offset = 0x100, - .map_io = omap15xx_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = omap_palmz71_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c deleted file mode 100644 index b041e6f6e9cf..000000000000 --- a/arch/arm/mach-omap1/board-perseus2.c +++ /dev/null @@ -1,333 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-perseus2.c - * - * Modified from board-generic.c - * - * Original OMAP730 support by Jean Pihet <j-pihet@ti.com> - * Updated for 2.6 by Kevin Hilman <kjh@hilman.org> - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/platnand.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> -#include <linux/platform_data/keypad-omap.h> -#include <linux/soc/ti/omap1-io.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "iomap.h" -#include "common.h" -#include "fpga.h" - -static const unsigned int p2_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(1, 0, KEY_RIGHT), - KEY(2, 0, KEY_LEFT), - KEY(3, 0, KEY_DOWN), - KEY(4, 0, KEY_ENTER), - KEY(0, 1, KEY_F10), - KEY(1, 1, KEY_SEND), - KEY(2, 1, KEY_END), - KEY(3, 1, KEY_VOLUMEDOWN), - KEY(4, 1, KEY_VOLUMEUP), - KEY(5, 1, KEY_RECORD), - KEY(0, 2, KEY_F9), - KEY(1, 2, KEY_3), - KEY(2, 2, KEY_6), - KEY(3, 2, KEY_9), - KEY(4, 2, KEY_KPDOT), - KEY(0, 3, KEY_BACK), - KEY(1, 3, KEY_2), - KEY(2, 3, KEY_5), - KEY(3, 3, KEY_8), - KEY(4, 3, KEY_0), - KEY(5, 3, KEY_KPSLASH), - KEY(0, 4, KEY_HOME), - KEY(1, 4, KEY_1), - KEY(2, 4, KEY_4), - KEY(3, 4, KEY_7), - KEY(4, 4, KEY_KPASTERISK), - KEY(5, 4, KEY_POWER), -}; - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ - .end = H2P2_DBG_FPGA_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = INT_7XX_MPU_EXT_NIRQ, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct mtd_partition nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* rest of flash is a file system */ - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - }, -}; - -static struct physmap_flash_data nor_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = nor_partitions, - .nr_parts = ARRAY_SIZE(nor_partitions), -}; - -static struct resource nor_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nor_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_data, - }, - .num_resources = 1, - .resource = &nor_resource, -}; - -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct nand_chip *chip) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - -static struct platform_nand_data nand_data = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .options = NAND_SAMSUNG_LP_OPTIONS, - }, - .ctrl = { - .cmd_ctrl = omap1_nand_cmd_ctl, - .dev_ready = nand_dev_ready, - }, -}; - -static struct resource nand_resource = { - .start = OMAP_CS3_PHYS, - .end = OMAP_CS3_PHYS + SZ_4K - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nand_device = { - .name = "gen_nand", - .id = 0, - .dev = { - .platform_data = &nand_data, - }, - .num_resources = 1, - .resource = &nand_resource, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource kp_resources[] = { - [0] = { - .start = INT_7XX_MPUIO_KEYPAD, - .end = INT_7XX_MPUIO_KEYPAD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data p2_keymap_data = { - .keymap = p2_keymap, - .keymap_size = ARRAY_SIZE(p2_keymap), -}; - -static struct omap_kp_platform_data kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &p2_keymap_data, - .delay = 4, - .dbounce = true, -}; - -static struct platform_device kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &kp_data, - }, - .num_resources = ARRAY_SIZE(kp_resources), - .resource = kp_resources, -}; - -static struct platform_device *devices[] __initdata = { - &nor_device, - &nand_device, - &smc91x_device, - &kp_device, -}; - -static const struct omap_lcd_config perseus2_lcd_config __initconst = { - .ctrl_name = "internal", -}; - -static void __init perseus2_init_smc91x(void) -{ - __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} - -static void __init omap_perseus2_init(void) -{ - /* Early, board-dependent init */ - - /* - * Hold GSM Reset until needed - */ - omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); - - /* - * UARTs -> done automagically by 8250 driver - */ - - /* - * CSx timings, GPIO Mux ... setup - */ - - /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); - omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); - - /* - * Ethernet support through the debug board - * CS1 timings setup - */ - omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); - omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); - - /* - * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, - * It is used as the Ethernet controller interrupt - */ - omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, - OMAP7XX_IO_CONF_9); - - perseus2_init_smc91x(); - - BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0); - gpio_direction_input(P2_NAND_RB_GPIO_PIN); - - omap_cfg_reg(L3_1610_FLASH_CS2B_OE); - omap_cfg_reg(M8_1610_FLASH_CS2B_WE); - - /* Mux pins for keypad */ - omap_cfg_reg(E2_7XX_KBR0); - omap_cfg_reg(J7_7XX_KBR1); - omap_cfg_reg(E1_7XX_KBR2); - omap_cfg_reg(F3_7XX_KBR3); - omap_cfg_reg(D2_7XX_KBR4); - omap_cfg_reg(C2_7XX_KBC0); - omap_cfg_reg(D3_7XX_KBC1); - omap_cfg_reg(E4_7XX_KBC2); - omap_cfg_reg(F4_7XX_KBC3); - omap_cfg_reg(E3_7XX_KBC4); - - if (IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)) { - /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ - int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000; - omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9); - } - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); - - omapfb_set_lcd_config(&perseus2_lcd_config); -} - -/* Only FPGA needs to be mapped here. All others are done with ioremap */ -static struct map_desc omap_perseus2_io_desc[] __initdata = { - { - .virtual = H2P2_DBG_FPGA_BASE, - .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START), - .length = H2P2_DBG_FPGA_SIZE, - .type = MT_DEVICE - } -}; - -static void __init omap_perseus2_map_io(void) -{ - omap7xx_map_io(); - iotable_init(omap_perseus2_io_desc, - ARRAY_SIZE(omap_perseus2_io_desc)); -} - -MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") - /* Maintainer: Kevin Hilman <kjh@hilman.org> */ - .atag_offset = 0x100, - .map_io = omap_perseus2_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = omap_perseus2_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c deleted file mode 100644 index 4c71a195969f..000000000000 --- a/arch/arm/mach-omap1/fpga.c +++ /dev/null @@ -1,186 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/fpga.c - * - * Interrupt handler for OMAP-1510 Innovator FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/errno.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/mach/irq.h> - -#include "hardware.h" -#include "iomap.h" -#include "common.h" -#include "fpga.h" - -static void fpga_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE; - - if (irq < 8) - __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) - & ~(1 << irq)), OMAP1510_FPGA_IMR_LO); - else if (irq < 16) - __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI) - & ~(1 << (irq - 8))), OMAP1510_FPGA_IMR_HI); - else - __raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2) - & ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2); -} - - -static inline u32 get_fpga_unmasked_irqs(void) -{ - return - ((__raw_readb(OMAP1510_FPGA_ISR_LO) & - __raw_readb(OMAP1510_FPGA_IMR_LO))) | - ((__raw_readb(OMAP1510_FPGA_ISR_HI) & - __raw_readb(OMAP1510_FPGA_IMR_HI)) << 8) | - ((__raw_readb(INNOVATOR_FPGA_ISR2) & - __raw_readb(INNOVATOR_FPGA_IMR2)) << 16); -} - - -static void fpga_ack_irq(struct irq_data *d) -{ - /* Don't need to explicitly ACK FPGA interrupts */ -} - -static void fpga_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE; - - if (irq < 8) - __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)), - OMAP1510_FPGA_IMR_LO); - else if (irq < 16) - __raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI) - | (1 << (irq - 8))), OMAP1510_FPGA_IMR_HI); - else - __raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2) - | (1 << (irq - 16))), INNOVATOR_FPGA_IMR2); -} - -static void fpga_mask_ack_irq(struct irq_data *d) -{ - fpga_mask_irq(d); - fpga_ack_irq(d); -} - -static void innovator_fpga_IRQ_demux(struct irq_desc *desc) -{ - u32 stat; - int fpga_irq; - - stat = get_fpga_unmasked_irqs(); - - if (!stat) - return; - - for (fpga_irq = OMAP_FPGA_IRQ_BASE; - (fpga_irq < OMAP_FPGA_IRQ_END) && stat; - fpga_irq++, stat >>= 1) { - if (stat & 1) { - generic_handle_irq(fpga_irq); - } - } -} - -static struct irq_chip omap_fpga_irq_ack = { - .name = "FPGA-ack", - .irq_ack = fpga_mask_ack_irq, - .irq_mask = fpga_mask_irq, - .irq_unmask = fpga_unmask_irq, -}; - - -static struct irq_chip omap_fpga_irq = { - .name = "FPGA", - .irq_ack = fpga_ack_irq, - .irq_mask = fpga_mask_irq, - .irq_unmask = fpga_unmask_irq, -}; - -/* - * All of the FPGA interrupt request inputs except for the touchscreen are - * edge-sensitive; the touchscreen is level-sensitive. The edge-sensitive - * interrupts are acknowledged as a side-effect of reading the interrupt - * status register from the FPGA. The edge-sensitive interrupt inputs - * cause a problem with level interrupt requests, such as Ethernet. The - * problem occurs when a level interrupt request is asserted while its - * interrupt input is masked in the FPGA, which results in a missed - * interrupt. - * - * In an attempt to workaround the problem with missed interrupts, the - * mask_ack routine for all of the FPGA interrupts has been changed from - * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt - * being serviced is left unmasked. We can do this because the FPGA cascade - * interrupt is run with all interrupts masked. - * - * Limited testing indicates that this workaround appears to be effective - * for the smc9194 Ethernet driver used on the Innovator. It should work - * on other FPGA interrupts as well, but any drivers that explicitly mask - * interrupts at the interrupt controller via disable_irq/enable_irq - * could pose a problem. - */ -void omap1510_fpga_init_irq(void) -{ - int i, res; - - __raw_writeb(0, OMAP1510_FPGA_IMR_LO); - __raw_writeb(0, OMAP1510_FPGA_IMR_HI); - __raw_writeb(0, INNOVATOR_FPGA_IMR2); - - for (i = OMAP_FPGA_IRQ_BASE; i < OMAP_FPGA_IRQ_END; i++) { - - if (i == OMAP1510_INT_FPGA_TS) { - /* - * The touchscreen interrupt is level-sensitive, so - * we'll use the regular mask_ack routine for it. - */ - irq_set_chip(i, &omap_fpga_irq_ack); - } - else { - /* - * All FPGA interrupts except the touchscreen are - * edge-sensitive, so we won't mask them. - */ - irq_set_chip(i, &omap_fpga_irq); - } - - irq_set_handler(i, handle_edge_irq); - irq_clear_status_flags(i, IRQ_NOREQUEST); - } - - /* - * The FPGA interrupt line is connected to GPIO13. Claim this pin for - * the ARM. - * - * NOTE: For general GPIO/MPUIO access and interrupts, please see - * gpio.[ch] - */ - res = gpio_request(13, "FPGA irq"); - if (res) { - pr_err("%s failed to get gpio\n", __func__); - return; - } - gpio_direction_input(13); - irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - irq_set_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); -} diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h deleted file mode 100644 index 7e7450edacc1..000000000000 --- a/arch/arm/mach-omap1/fpga.h +++ /dev/null @@ -1,49 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Interrupt handler for OMAP-1510 FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - */ - -#ifndef __ASM_ARCH_OMAP_FPGA_H -#define __ASM_ARCH_OMAP_FPGA_H - -/* - * --------------------------------------------------------------------------- - * H2/P2 Debug board FPGA - * --------------------------------------------------------------------------- - */ -/* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ - -#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ - -/* LEDs definition on debug board (16 LEDs, all physically green) */ -#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) -#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) -#define H2P2_DBG_FPGA_LED_RED (1 << 13) -#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) -/* cpu0 load-meter LEDs */ -#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... -#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 -#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) - -#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) -#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) - -#endif diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c deleted file mode 100644 index c372b357eab4..000000000000 --- a/arch/arm/mach-omap1/gpio7xx.c +++ /dev/null @@ -1,272 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * OMAP7xx specific gpio init - * - * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ - * - * Author: - * Charulatha V <charu@ti.com> - */ - -#include <linux/gpio.h> -#include <linux/platform_data/gpio-omap.h> - -#include "irqs.h" -#include "soc.h" - -#define OMAP7XX_GPIO1_BASE 0xfffbc000 -#define OMAP7XX_GPIO2_BASE 0xfffbc800 -#define OMAP7XX_GPIO3_BASE 0xfffbd000 -#define OMAP7XX_GPIO4_BASE 0xfffbd800 -#define OMAP7XX_GPIO5_BASE 0xfffbe000 -#define OMAP7XX_GPIO6_BASE 0xfffbe800 -#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE - -/* mpu gpio */ -static struct resource omap7xx_mpu_gpio_resources[] = { - { - .start = OMAP1_MPUIO_VBASE, - .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_MPUIO, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { - .revision = USHRT_MAX, - .direction = OMAP_MPUIO_IO_CNTL / 2, - .datain = OMAP_MPUIO_INPUT_LATCH / 2, - .dataout = OMAP_MPUIO_OUTPUT / 2, - .irqstatus = OMAP_MPUIO_GPIO_INT / 2, - .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2, - .irqenable_inv = true, - .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE >> 1, -}; - -static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = { - .is_mpuio = true, - .bank_width = 16, - .bank_stride = 2, - .regs = &omap7xx_mpuio_regs, -}; - -static struct platform_device omap7xx_mpu_gpio = { - .name = "omap_gpio", - .id = 0, - .dev = { - .platform_data = &omap7xx_mpu_gpio_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources), - .resource = omap7xx_mpu_gpio_resources, -}; - -/* gpio1 */ -static struct resource omap7xx_gpio1_resources[] = { - { - .start = OMAP7XX_GPIO1_BASE, - .end = OMAP7XX_GPIO1_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_reg_offs omap7xx_gpio_regs = { - .revision = USHRT_MAX, - .direction = OMAP7XX_GPIO_DIR_CONTROL, - .datain = OMAP7XX_GPIO_DATA_INPUT, - .dataout = OMAP7XX_GPIO_DATA_OUTPUT, - .irqstatus = OMAP7XX_GPIO_INT_STATUS, - .irqenable = OMAP7XX_GPIO_INT_MASK, - .irqenable_inv = true, - .irqctrl = OMAP7XX_GPIO_INT_CONTROL, -}; - -static struct omap_gpio_platform_data omap7xx_gpio1_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio1 = { - .name = "omap_gpio", - .id = 1, - .dev = { - .platform_data = &omap7xx_gpio1_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio1_resources), - .resource = omap7xx_gpio1_resources, -}; - -/* gpio2 */ -static struct resource omap7xx_gpio2_resources[] = { - { - .start = OMAP7XX_GPIO2_BASE, - .end = OMAP7XX_GPIO2_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_platform_data omap7xx_gpio2_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio2 = { - .name = "omap_gpio", - .id = 2, - .dev = { - .platform_data = &omap7xx_gpio2_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio2_resources), - .resource = omap7xx_gpio2_resources, -}; - -/* gpio3 */ -static struct resource omap7xx_gpio3_resources[] = { - { - .start = OMAP7XX_GPIO3_BASE, - .end = OMAP7XX_GPIO3_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_platform_data omap7xx_gpio3_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio3 = { - .name = "omap_gpio", - .id = 3, - .dev = { - .platform_data = &omap7xx_gpio3_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio3_resources), - .resource = omap7xx_gpio3_resources, -}; - -/* gpio4 */ -static struct resource omap7xx_gpio4_resources[] = { - { - .start = OMAP7XX_GPIO4_BASE, - .end = OMAP7XX_GPIO4_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK4, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_platform_data omap7xx_gpio4_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio4 = { - .name = "omap_gpio", - .id = 4, - .dev = { - .platform_data = &omap7xx_gpio4_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio4_resources), - .resource = omap7xx_gpio4_resources, -}; - -/* gpio5 */ -static struct resource omap7xx_gpio5_resources[] = { - { - .start = OMAP7XX_GPIO5_BASE, - .end = OMAP7XX_GPIO5_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK5, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_platform_data omap7xx_gpio5_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio5 = { - .name = "omap_gpio", - .id = 5, - .dev = { - .platform_data = &omap7xx_gpio5_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio5_resources), - .resource = omap7xx_gpio5_resources, -}; - -/* gpio6 */ -static struct resource omap7xx_gpio6_resources[] = { - { - .start = OMAP7XX_GPIO6_BASE, - .end = OMAP7XX_GPIO6_BASE + SZ_2K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_7XX_GPIO_BANK6, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct omap_gpio_platform_data omap7xx_gpio6_config = { - .bank_width = 32, - .regs = &omap7xx_gpio_regs, -}; - -static struct platform_device omap7xx_gpio6 = { - .name = "omap_gpio", - .id = 6, - .dev = { - .platform_data = &omap7xx_gpio6_config, - }, - .num_resources = ARRAY_SIZE(omap7xx_gpio6_resources), - .resource = omap7xx_gpio6_resources, -}; - -static struct platform_device *omap7xx_gpio_dev[] __initdata = { - &omap7xx_mpu_gpio, - &omap7xx_gpio1, - &omap7xx_gpio2, - &omap7xx_gpio3, - &omap7xx_gpio4, - &omap7xx_gpio5, - &omap7xx_gpio6, -}; - -/* - * omap7xx_gpio_init needs to be done before - * machine_init functions access gpio APIs. - * Hence omap7xx_gpio_init is a postcore_initcall. - */ -static int __init omap7xx_gpio_init(void) -{ - int i; - - if (!cpu_is_omap7xx()) - return -EINVAL; - - for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++) - platform_device_register(omap7xx_gpio_dev[i]); - - return 0; -} -postcore_initcall(omap7xx_gpio_init); diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index c6b498ebeb47..72b3b44b5be7 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -874,7 +874,7 @@ config I2C_OCORES config I2C_OMAP tristate "OMAP I2C adapter" depends on ARCH_OMAP || ARCH_K3 || COMPILE_TEST - default y if MACH_OMAP_H3 || MACH_OMAP_OSK + default MACH_OMAP_OSK help If you say yes to this option, support will be included for the I2C interface on the Texas Instruments OMAP1/2 family of processors. diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 30db49f31866..e5ccea55b4ae 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1514,7 +1514,7 @@ config TPS6105X config TPS65010 tristate "TI TPS6501x Power Management chips" depends on I2C && GPIOLIB - default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK + default MACH_OMAP_OSK help If you say yes here you get support for the TPS6501x series of Power Management chips. These include voltage regulators, diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 30c9b168cac1..1eaebaef0b3e 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -489,7 +489,7 @@ config MMC_SDHCI_ST config MMC_OMAP tristate "TI OMAP Multimedia Card Interface support" depends on ARCH_OMAP - depends on TPS65010 || !MACH_OMAP_H2 + depends on TPS65010 help This selects the TI OMAP Multimedia card Interface. If you have an OMAP board with a Multimedia Card slot, diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index b3006d8b04ab..0c5640bd6c24 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -118,7 +118,6 @@ config USB_GR_UDC config USB_OMAP tristate "OMAP USB Device Controller" depends on ARCH_OMAP1 - depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) help Many Texas Instruments OMAP processors have flexible full speed USB device controllers, with support for up to 30 diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 0442dc4bc334..d81692cc2990 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -409,7 +409,6 @@ if USB_OHCI_HCD config USB_OHCI_HCD_OMAP1 tristate "OHCI support for OMAP1/2 chips" depends on ARCH_OMAP1 - depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) default y help Enables support for the OHCI controller on OMAP1/2 chips. diff --git a/include/linux/platform_data/leds-omap.h b/include/linux/platform_data/leds-omap.h deleted file mode 100644 index dd1a3ec86fe4..000000000000 --- a/include/linux/platform_data/leds-omap.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif |