diff options
447 files changed, 28153 insertions, 8768 deletions
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 82e418d648d0..7f5fc3ba9c91 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -20,6 +20,8 @@ Samsung-S3C24XX - S3C24XX ARM Linux Overview Sharp-LH - Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC) +SPEAr + - ST SPEAr platform Linux Overview VFP/ - Release notes for Linux Kernel Vector Floating Point support code empeg/ diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt new file mode 100644 index 000000000000..253a35c6f782 --- /dev/null +++ b/Documentation/arm/SPEAr/overview.txt @@ -0,0 +1,60 @@ + SPEAr ARM Linux Overview + ========================== + +Introduction +------------ + + SPEAr (Structured Processor Enhanced Architecture). + weblink : http://www.st.com/spear + + The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are + supported by the 'spear' platform of ARM Linux. Currently SPEAr300, + SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX + series is in progress. + + Hierarchy in SPEAr is as follows: + + SPEAr (Platform) + - SPEAr3XX (3XX SOC series, based on ARM9) + - SPEAr300 (SOC) + - SPEAr300_EVB (Evaluation Board) + - SPEAr310 (SOC) + - SPEAr310_EVB (Evaluation Board) + - SPEAr320 (SOC) + - SPEAr320_EVB (Evaluation Board) + - SPEAr6XX (6XX SOC series, based on ARM9) + - SPEAr600 (SOC) + - SPEAr600_EVB (Evaluation Board) + - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9) + - SPEAr1300 (SOC) + + Configuration + ------------- + + A generic configuration is provided for each machine, and can be used as the + default by + make spear600_defconfig + make spear300_defconfig + make spear310_defconfig + make spear320_defconfig + + Layout + ------ + + The common files for multiple machine families (SPEAr3XX, SPEAr6XX and + SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear + with headers in plat/. + + Each machine series have a directory with name arch/arm/mach-spear followed by + series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx. + + Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for + spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine + specific files, like spear300.c, spear310.c, spear320.c and spear600.c. + mach-spear* also contains board specific files for each machine type. + + + Document Author + --------------- + + Viresh Kumar, (c) 2010 ST Microelectronics diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 05df0b7514b6..a5e381185de9 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -520,29 +520,6 @@ Who: Hans de Goede <hdegoede@redhat.com> ---------------------------- -What: corgikbd, spitzkbd, tosakbd driver -When: 2.6.35 -Files: drivers/input/keyboard/{corgi,spitz,tosa}kbd.c -Why: We now have a generic GPIO based matrix keyboard driver that - are fully capable of handling all the keys on these devices. - The original drivers manipulate the GPIO registers directly - and so are difficult to maintain. -Who: Eric Miao <eric.y.miao@gmail.com> - ----------------------------- - -What: corgi_ssp and corgi_ts driver -When: 2.6.35 -Files: arch/arm/mach-pxa/corgi_ssp.c, drivers/input/touchscreen/corgi_ts.c -Why: The corgi touchscreen is now deprecated in favour of the generic - ads7846.c driver. The noise reduction technique used in corgi_ts.c, - that's to wait till vsync before ADC sampling, is also integrated into - ads7846 driver now. Provided that the original driver is not generic - and is difficult to maintain, it will be removed later. -Who: Eric Miao <eric.y.miao@gmail.com> - ----------------------------- - What: capifs When: February 2011 Files: drivers/isdn/capi/capifs.* diff --git a/MAINTAINERS b/MAINTAINERS index 3d2651bffadd..a77ae73a5f6e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -586,6 +586,12 @@ F: drivers/mtd/nand/bcm_umi_bch.c F: drivers/mtd/nand/bcm_umi_hamming.c F: drivers/mtd/nand/nand_bcm_umi.h +ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT +M: Anton Vorontsov <avorontsov@mvista.com> +S: Maintained +F: arch/arm/mach-cns3xxx/ +T: git git://git.infradead.org/users/cbou/linux-cns3xxx.git + ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE M: Hartley Sweeten <hsweeten@visionengravers.com> M: Ryan Mallon <ryan@bluewatersys.com> @@ -775,11 +781,10 @@ M: Philipp Zabel <philipp.zabel@gmail.com> S: Maintained ARM/Marvell Loki/Kirkwood/MV78xx0/Orion SOC support -M: Lennert Buytenhek <buytenh@marvell.com> -M: Nicolas Pitre <nico@marvell.com> +M: Lennert Buytenhek <kernel@wantstofly.org> +M: Nicolas Pitre <nico@fluxnic.net> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -T: git git://git.marvell.com/orion -S: Maintained +S: Odd Fixes F: arch/arm/mach-loki/ F: arch/arm/mach-kirkwood/ F: arch/arm/mach-mv78xx0/ @@ -994,6 +999,20 @@ W: http://www.arm.linux.org.uk/ S: Maintained F: arch/arm/vfp/ +ARM/VOIPAC PXA270 SUPPORT +M: Marek Vasut <marek.vasut@gmail.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-pxa/vpac270.c +F: arch/arm/mach-pxa/include/mach-pxa/vpac270.h + +ARM/ZIPIT Z2 SUPPORT +M: Marek Vasut <marek.vasut@gmail.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-pxa/z2.c +F: arch/arm/mach-pxa/include/mach-pxa/z2.h + ASC7621 HARDWARE MONITOR DRIVER M: George Joseph <george.joseph@fairview5.com> L: lm-sensors@lm-sensors.org @@ -3635,7 +3654,8 @@ F: drivers/net/wireless/mwl8k.c MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER M: Nicolas Pitre <nico@fluxnic.net> -S: Maintained +S: Odd Fixes +F: drivers/mmc/host/mvsdio.* MARVELL YUKON / SYSKONNECT DRIVER M: Mirko Lindner <mlindner@syskonnect.de> @@ -5133,7 +5153,7 @@ F: mm/sl?b.c SMC91x ETHERNET DRIVER M: Nicolas Pitre <nico@fluxnic.net> -S: Maintained +S: Odd Fixes F: drivers/net/smc91x.* SMSC47B397 HARDWARE MONITOR DRIVER @@ -5264,6 +5284,46 @@ F: drivers/serial/sunsu.c F: drivers/serial/sunzilog.c F: drivers/serial/sunzilog.h +SPEAR PLATFORM SUPPORT +M: Viresh Kumar <viresh.kumar@st.com> +W: http://www.st.com/spear +S: Maintained +F: arch/arm/plat-spear/ + +SPEAR3XX MACHINE SUPPORT +M: Viresh Kumar <viresh.kumar@st.com> +W: http://www.st.com/spear +S: Maintained +F: arch/arm/mach-spear3xx/ + +SPEAR6XX MACHINE SUPPORT +M: Rajeev Kumar <rajeev-dlh.kumar@st.com> +W: http://www.st.com/spear +S: Maintained +F: arch/arm/mach-spear6xx/ + +SPEAR CLOCK FRAMEWORK SUPPORT +M: Viresh Kumar <viresh.kumar@st.com> +W: http://www.st.com/spear +S: Maintained +F: arch/arm/mach-spear*/clock.c +F: arch/arm/mach-spear*/include/mach/clkdev.h +F: arch/arm/plat-spear/clock.c +F: arch/arm/plat-spear/include/plat/clock.h and clkdev.h + +SPEAR PAD MULTIPLEXING SUPPORT +M: Viresh Kumar <viresh.kumar@st.com> +W: http://www.st.com/spear +S: Maintained +F: arch/arm/plat-spear/include/plat/padmux.h +F: arch/arm/plat-spear/padmux.c +F: arch/arm/mach-spear*/spear*xx.c +F: arch/arm/mach-spear*/include/mach/generic.h +F: arch/arm/mach-spear3xx/spear3*0.c +F: arch/arm/mach-spear3xx/spear3*0_evb.c +F: arch/arm/mach-spear6xx/spear600.c +F: arch/arm/mach-spear6xx/spear600_evb.c + SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER M: Roger Wolff <R.E.Wolff@BitWizard.nl> S: Supported diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 92622eb5cc0d..a07b6c47a6b8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -13,7 +13,7 @@ config ARM select RTC_LIB select SYS_SUPPORTS_APM_EMULATION select GENERIC_ATOMIC64 if (!CPU_32v6K) - select HAVE_OPROFILE + select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB select HAVE_KPROBES if (!XIP_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) @@ -21,6 +21,7 @@ config ARM select HAVE_GENERIC_DMA_COHERENT select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZO + select HAVE_KERNEL_LZMA select HAVE_PERF_EVENTS select PERF_USE_VMALLOC help @@ -42,6 +43,11 @@ config GENERIC_GPIO config GENERIC_TIME bool + default y + +config ARCH_USES_GETTIMEOFFSET + bool + default n config GENERIC_CLOCKEVENTS bool @@ -175,28 +181,6 @@ config ARM_L1_CACHE_SHIFT_6 help Setting ARM L1 cache line size to 64 Bytes. -if OPROFILE - -config OPROFILE_ARMV6 - def_bool y - depends on CPU_V6 && !SMP - select OPROFILE_ARM11_CORE - -config OPROFILE_MPCORE - def_bool y - depends on CPU_V6 && SMP - select OPROFILE_ARM11_CORE - -config OPROFILE_ARM11_CORE - bool - -config OPROFILE_ARMV7 - def_bool y - depends on CPU_V7 && !SMP - bool - -endif - config VECTORS_BASE hex default 0xffff0000 if MMU || CPU_HIGH_VECTOR @@ -231,6 +215,7 @@ config ARCH_AAEC2000 select CPU_ARM920T select ARM_AMBA select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Agilent AAEC-2000 @@ -238,21 +223,22 @@ config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA select ARCH_HAS_CPUFREQ - select HAVE_CLK select COMMON_CLKDEV - select ICST525 + select ICST + select GENERIC_CLOCKEVENTS + select PLAT_VERSATILE help Support for ARM's Integrator platform. config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA - select HAVE_CLK select COMMON_CLKDEV - select ICST307 - select GENERIC_TIME + select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select PLAT_VERSATILE + select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB help This enables support for ARM Ltd RealView boards. @@ -261,20 +247,33 @@ config ARCH_VERSATILE bool "ARM Ltd. Versatile family" select ARM_AMBA select ARM_VIC - select HAVE_CLK select COMMON_CLKDEV - select ICST307 - select GENERIC_TIME + select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select PLAT_VERSATILE + select ARM_TIMER_SP804 help This enables support for ARM Ltd Versatile board. +config ARCH_VEXPRESS + bool "ARM Ltd. Versatile Express family" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_TIMER_SP804 + select COMMON_CLKDEV + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select ICST + select PLAT_VERSATILE + help + This enables support for the ARM Ltd Versatile Express boards. + config ARCH_AT91 bool "Atmel AT91" - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -285,7 +284,6 @@ config ARCH_BCMRING select CPU_V6 select ARM_AMBA select COMMON_CLKDEV - select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB help @@ -294,14 +292,23 @@ config ARCH_BCMRING config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x-based" select CPU_ARM720T + select ARCH_USES_GETTIMEOFFSET help Support for Cirrus Logic 711x/721x based boards. +config ARCH_CNS3XXX + bool "Cavium Networks CNS3XXX family" + select CPU_V6 + select GENERIC_CLOCKEVENTS + select ARM_GIC + help + Support for Cavium Networks CNS3XXX platform. + config ARCH_GEMINI bool "Cortina Systems Gemini" select CPU_FA526 - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET help Support for the Cortina Systems Gemini family SoCs @@ -310,6 +317,7 @@ config ARCH_EBSA110 select CPU_SA110 select ISA select NO_IOPORT + select ARCH_USES_GETTIMEOFFSET help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an @@ -321,11 +329,10 @@ config ARCH_EP93XX select CPU_ARM920T select ARM_AMBA select ARM_VIC - select GENERIC_GPIO - select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_USES_GETTIMEOFFSET help This enables support for the Cirrus EP93xx series of CPUs. @@ -333,16 +340,15 @@ config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 select FOOTBRIDGE + select ARCH_USES_GETTIMEOFFSET help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. config ARCH_MXC bool "Freescale MXC/iMX-based" - select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK select COMMON_CLKDEV help Support for Freescale MXC/iMX-based family of processors @@ -350,12 +356,9 @@ config ARCH_MXC config ARCH_STMP3XXX bool "Freescale STMP3xxx" select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB - select GENERIC_TIME select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select USB_ARCH_HAS_EHCI help Support for systems based on the Freescale 3xxx CPUs. @@ -365,7 +368,6 @@ config ARCH_NETX select CPU_ARM926T select ARM_VIC select GENERIC_CLOCKEVENTS - select GENERIC_TIME help This enables support for systems based on the Hilscher NetX Soc @@ -373,6 +375,7 @@ config ARCH_H720X bool "Hynix HMS720x-based" select CPU_ARM720T select ISA_DMA_API + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Hynix HMS720x @@ -393,7 +396,6 @@ config ARCH_IOP32X select CPU_XSCALE select PLAT_IOP select PCI - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Support for Intel's 80219 and IOP32X (XScale) family of @@ -405,7 +407,6 @@ config ARCH_IOP33X select CPU_XSCALE select PLAT_IOP select PCI - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Support for Intel's IOP33X (XScale) family of processors. @@ -415,6 +416,7 @@ config ARCH_IXP23XX depends on MMU select CPU_XSC3 select PCI + select ARCH_USES_GETTIMEOFFSET help Support for Intel's IXP23xx (XScale) family of processors. @@ -423,6 +425,7 @@ config ARCH_IXP2000 depends on MMU select CPU_XSCALE select PCI + select ARCH_USES_GETTIMEOFFSET help Support for Intel's IXP2400/2800 (XScale) family of processors. @@ -431,7 +434,6 @@ config ARCH_IXP4XX depends on MMU select CPU_XSCALE select GENERIC_GPIO - select GENERIC_TIME select GENERIC_CLOCKEVENTS select DMABOUNCE if PCI help @@ -441,6 +443,7 @@ config ARCH_L7200 bool "LinkUp-L7200" select CPU_ARM720T select FIQ + select ARCH_USES_GETTIMEOFFSET help Say Y here if you intend to run this kernel on a LinkUp Systems L7200 Software Development Board which uses an ARM720T processor. @@ -454,9 +457,7 @@ config ARCH_L7200 config ARCH_DOVE bool "Marvell Dove" select PCI - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB - select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION help @@ -466,9 +467,7 @@ config ARCH_KIRKWOOD bool "Marvell Kirkwood" select CPU_FEROCEON select PCI - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB - select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION help @@ -478,7 +477,6 @@ config ARCH_KIRKWOOD config ARCH_LOKI bool "Marvell Loki (88RC8480)" select CPU_FEROCEON - select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION help @@ -488,9 +486,7 @@ config ARCH_MV78XX0 bool "Marvell MV78xx0" select CPU_FEROCEON select PCI - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB - select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION help @@ -502,9 +498,7 @@ config ARCH_ORION5X depends on MMU select CPU_FEROCEON select PCI - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB - select GENERIC_TIME select GENERIC_CLOCKEVENTS select PLAT_ORION help @@ -515,11 +509,8 @@ config ARCH_ORION5X config ARCH_MMP bool "Marvell PXA168/910/MMP2" depends on MMU - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK select COMMON_CLKDEV - select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT select PLAT_PXA @@ -529,8 +520,8 @@ config ARCH_MMP config ARCH_KS8695 bool "Micrel/Kendin KS8695" select CPU_ARM922T - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB + select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -539,7 +530,6 @@ config ARCH_NS9XXX bool "NetSilicon NS9xxx" select CPU_ARM926T select GENERIC_GPIO - select GENERIC_TIME select GENERIC_CLOCKEVENTS select HAVE_CLK help @@ -552,10 +542,7 @@ config ARCH_W90X900 bool "Nuvoton W90X900 CPU" select CPU_ARM926T select ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO - select HAVE_CLK select COMMON_CLKDEV - select GENERIC_TIME select GENERIC_CLOCKEVENTS help Support for Nuvoton (Winbond logic dept.) ARM9 processor, @@ -569,7 +556,6 @@ config ARCH_W90X900 config ARCH_NUC93X bool "Nuvoton NUC93X CPU" select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV help Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a @@ -578,8 +564,8 @@ config ARCH_NUC93X config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV + select ARCH_USES_GETTIMEOFFSET help This enables support for Philips PNX4008 mobile platform. @@ -588,11 +574,8 @@ config ARCH_PXA depends on MMU select ARCH_MTD_XIP select ARCH_HAS_CPUFREQ - select GENERIC_GPIO - select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB - select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT select PLAT_PXA @@ -601,14 +584,14 @@ config ARCH_PXA config ARCH_MSM bool "Qualcomm MSM" - select CPU_V6 - select GENERIC_TIME + select HAVE_CLK select GENERIC_CLOCKEVENTS help - Support for Qualcomm MSM7K based systems. This runs on the ARM11 - apps processor of the MSM7K and depends on a shared memory - interface to the ARM9 modem processor which runs the baseband stack - and controls some vital subsystems (clock and power control, etc). + Support for Qualcomm MSM/QSD based systems. This runs on the + apps processor of the MSM/QSD and depends on a shared memory + interface to the modem processor which runs the baseband + stack and controls some vital subsystems + (clock and power control, etc). config ARCH_SHMOBILE bool "Renesas SH-Mobile" @@ -625,6 +608,7 @@ config ARCH_RPC select ISA_DMA_API select NO_IOPORT select ARCH_SPARSEMEM_ENABLE + select ARCH_USES_GETTIMEOFFSET help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -637,8 +621,6 @@ config ARCH_SA1100 select ARCH_MTD_XIP select ARCH_HAS_CPUFREQ select CPU_FREQ - select GENERIC_GPIO - select GENERIC_TIME select GENERIC_CLOCKEVENTS select HAVE_CLK select TICK_ONESHOT @@ -647,23 +629,28 @@ config ARCH_SA1100 Support for StrongARM 11x0 based boards. config ARCH_S3C2410 - bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" + bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450" select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the Samsung SMDK2410 development board (and derivatives). + Note, the S3C2416 and the S3C2450 are so close that they even share + the same SoC ID code. This means that there is no seperate machine + directory (no arch/arm/mach-s3c2450) as the S3C2416 was first. + config ARCH_S3C64XX bool "Samsung S3C64XX" select PLAT_SAMSUNG select CPU_V6 - select GENERIC_GPIO select ARM_VIC select HAVE_CLK select NO_IOPORT + select ARCH_USES_GETTIMEOFFSET select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select SAMSUNG_CLKSRC @@ -720,6 +707,7 @@ config ARCH_SHARK select ISA_DMA select ZONE_DMA select PCI + select ARCH_USES_GETTIMEOFFSET help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). @@ -729,6 +717,7 @@ config ARCH_LH7A40X select CPU_ARM922T select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM + select ARCH_USES_GETTIMEOFFSET help Say Y here for systems based on one of the Sharp LH7A40X System on a Chip processors. These CPUs include an ARM922T @@ -742,9 +731,7 @@ config ARCH_U300 select HAVE_TCM select ARM_AMBA select ARM_VIC - select GENERIC_TIME select GENERIC_CLOCKEVENTS - select HAVE_CLK select COMMON_CLKDEV select GENERIC_GPIO help @@ -754,9 +741,9 @@ config ARCH_U8500 bool "ST-Ericsson U8500 Series" select CPU_V7 select ARM_AMBA - select GENERIC_TIME select GENERIC_CLOCKEVENTS select COMMON_CLKDEV + select ARCH_REQUIRE_GPIOLIB help Support for ST-Ericsson's Ux500 architecture @@ -765,11 +752,8 @@ config ARCH_NOMADIK select ARM_AMBA select ARM_VIC select CPU_ARM926T - select HAVE_CLK select COMMON_CLKDEV - select GENERIC_TIME select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Support for the Nomadik platform by ST-Ericsson @@ -777,11 +761,8 @@ config ARCH_NOMADIK config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926T - select GENERIC_TIME select GENERIC_CLOCKEVENTS - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK select ZONE_DMA select HAVE_IDE select COMMON_CLKDEV @@ -792,16 +773,24 @@ config ARCH_DAVINCI config ARCH_OMAP bool "TI OMAP" - select GENERIC_GPIO select HAVE_CLK select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ - select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_HAS_HOLES_MEMORYMODEL help Support for TI's OMAP platform (OMAP1 and OMAP2). +config PLAT_SPEAR + bool "ST SPEAr" + select ARM_AMBA + select ARCH_REQUIRE_GPIOLIB + select COMMON_CLKDEV + select GENERIC_CLOCKEVENTS + select HAVE_CLK + help + Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). + endchoice # @@ -817,6 +806,8 @@ source "arch/arm/mach-bcmring/Kconfig" source "arch/arm/mach-clps711x/Kconfig" +source "arch/arm/mach-cns3xxx/Kconfig" + source "arch/arm/mach-davinci/Kconfig" source "arch/arm/mach-dove/Kconfig" @@ -887,11 +878,13 @@ source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-s5pc1xx/Kconfig" +source "arch/arm/plat-spear/Kconfig" if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" +source "arch/arm/mach-s3c2416/Kconfig" source "arch/arm/mach-s3c2440/Kconfig" source "arch/arm/mach-s3c2443/Kconfig" endif @@ -920,6 +913,8 @@ source "arch/arm/mach-ux500/Kconfig" source "arch/arm/mach-versatile/Kconfig" +source "arch/arm/mach-vexpress/Kconfig" + source "arch/arm/mach-w90x900/Kconfig" # Definitions to make life easier @@ -929,7 +924,6 @@ config ARCH_ACORN config PLAT_IOP bool select GENERIC_CLOCKEVENTS - select GENERIC_TIME config PLAT_ORION bool @@ -937,6 +931,12 @@ config PLAT_ORION config PLAT_PXA bool +config PLAT_VERSATILE + bool + +config ARM_TIMER_SP804 + bool + source arch/arm/mm/Kconfig config IWMMXT @@ -1065,6 +1065,10 @@ config PCI your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or VESA. If you have PCI, say Y, otherwise N. +config PCI_DOMAINS + bool + depends on PCI + config PCI_SYSCALL def_bool PCI @@ -1093,10 +1097,11 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500) + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ + ARCH_U8500 || ARCH_VEXPRESS_CA9X4) depends on GENERIC_CLOCKEVENTS select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500) + select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1277,7 +1282,7 @@ config HIGHPTE config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS && CPU_HAS_PMU && (CPU_V6 || CPU_V7) + depends on PERF_EVENTS && CPU_HAS_PMU default y help Enable hardware performance counter support for perf events. If diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ed820e737a8a..d5af3b024300 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -121,6 +121,7 @@ machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_AT91) := at91 machine-$(CONFIG_ARCH_BCMRING) := bcmring machine-$(CONFIG_ARCH_CLPS711X) := clps711x +machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_DOVE) := dove machine-$(CONFIG_ARCH_EBSA110) := ebsa110 @@ -160,7 +161,7 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443 +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P6440) := s5p6440 @@ -175,9 +176,14 @@ machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx machine-$(CONFIG_ARCH_U300) := u300 machine-$(CONFIG_ARCH_U8500) := ux500 machine-$(CONFIG_ARCH_VERSATILE) := versatile +machine-$(CONFIG_ARCH_VEXPRESS) := vexpress machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_ARCH_NUC93X) := nuc93x machine-$(CONFIG_FOOTBRIDGE) := footbridge +machine-$(CONFIG_MACH_SPEAR300) := spear3xx +machine-$(CONFIG_MACH_SPEAR310) := spear3xx +machine-$(CONFIG_MACH_SPEAR320) := spear3xx +machine-$(CONFIG_MACH_SPEAR600) := spear6xx # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. @@ -192,6 +198,8 @@ plat-$(CONFIG_PLAT_PXA) := pxa plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung plat-$(CONFIG_PLAT_S5P) := s5p samsung +plat-$(CONFIG_PLAT_SPEAR) := spear +plat-$(CONFIG_PLAT_VERSATILE) := versatile ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 97c89e7de7d3..53faa9063a03 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -65,6 +65,7 @@ SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ suffix_$(CONFIG_KERNEL_GZIP) = gzip suffix_$(CONFIG_KERNEL_LZO) = lzo +suffix_$(CONFIG_KERNEL_LZMA) = lzma targets := vmlinux vmlinux.lds \ piggy.$(suffix_y) piggy.$(suffix_y).o \ diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index 9c097073ce4c..4c72a97bc3e1 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -40,6 +40,10 @@ extern void error(char *); #include "../../../../lib/decompress_unlzo.c" #endif +#ifdef CONFIG_KERNEL_LZMA +#include "../../../../lib/decompress_unlzma.c" +#endif + void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)) { decompress(input, len, NULL, NULL, output, NULL, error); diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.lzma.S new file mode 100644 index 000000000000..d7e69cffbc0a --- /dev/null +++ b/arch/arm/boot/compressed/piggy.lzma.S @@ -0,0 +1,6 @@ + .section .piggydata,#alloc + .globl input_data +input_data: + .incbin "arch/arm/boot/compressed/piggy.lzma" + .globl input_data_end +input_data_end: diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 4efbb9df0444..0a34c8186924 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -12,10 +12,10 @@ config ARM_VIC_NR The maximum number of VICs available in the system, for power management. -config ICST525 +config ICST bool -config ICST307 +config PL330 bool config SA1111 @@ -40,3 +40,4 @@ config SHARP_SCOOP config COMMON_CLKDEV bool + select HAVE_CLK diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 76be7ff2a7ca..e6e8664a9413 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -4,8 +4,8 @@ obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_ARM_VIC) += vic.o -obj-$(CONFIG_ICST525) += icst525.o -obj-$(CONFIG_ICST307) += icst307.o +obj-$(CONFIG_ICST) += icst.o +obj-$(CONFIG_PL330) += pl330.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o obj-$(CONFIG_DMABOUNCE) += dmabounce.o diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index dba4c1da63ed..e2b2bb66e094 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -53,12 +53,13 @@ static struct clk *clk_find(const char *dev_id, const char *con_id) continue; match += 1; } - if (match == 0) - continue; if (match > best) { clk = p->clk; - best = match; + if (match != 3) + best = match; + else + break; } } return clk; diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c new file mode 100644 index 000000000000..9a7f09cff300 --- /dev/null +++ b/arch/arm/common/icst.c @@ -0,0 +1,100 @@ +/* + * linux/arch/arm/common/icst307.c + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICST307 + * clock generators. See http://www.icst.com/ for more information + * on these devices. + * + * This is an almost identical implementation to the ICST525 clock generator. + * The s2div and idx2s files are different + */ +#include <linux/module.h> +#include <linux/kernel.h> + +#include <asm/hardware/icst.h> + +/* + * Divisors for each OD setting. + */ +const unsigned char icst307_s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 }; +const unsigned char icst525_s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 }; +EXPORT_SYMBOL(icst307_s2div); +EXPORT_SYMBOL(icst525_s2div); + +unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco) +{ + return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]); +} + +EXPORT_SYMBOL(icst_hz); + +/* + * Ascending divisor S values. + */ +const unsigned char icst307_idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 }; +const unsigned char icst525_idx2s[8] = { 1, 3, 4, 7, 5, 2, 6, 0 }; +EXPORT_SYMBOL(icst307_idx2s); +EXPORT_SYMBOL(icst525_idx2s); + +struct icst_vco +icst_hz_to_vco(const struct icst_params *p, unsigned long freq) +{ + struct icst_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; + unsigned long f; + unsigned int i = 0, rd, best = (unsigned int)-1; + + /* + * First, find the PLL output divisor such + * that the PLL output is within spec. + */ + do { + f = freq * p->s2div[p->idx2s[i]]; + + if (f > p->vco_min && f <= p->vco_max) + break; + } while (i < 8); + + if (i >= 8) + return vco; + + vco.s = p->idx2s[i]; + + /* + * Now find the closest divisor combination + * which gives a PLL output of 'f'. + */ + for (rd = p->rd_min; rd <= p->rd_max; rd++) { + unsigned long fref_div, f_pll; + unsigned int vd; + int f_diff; + + fref_div = (2 * p->ref) / rd; + + vd = (f + fref_div / 2) / fref_div; + if (vd < p->vd_min || vd > p->vd_max) + continue; + + f_pll = fref_div * vd; + f_diff = f_pll - f; + if (f_diff < 0) + f_diff = -f_diff; + + if ((unsigned)f_diff < best) { + vco.v = vd - 8; + vco.r = rd - 2; + if (f_diff == 0) + break; + best = f_diff; + } + } + + return vco; +} + +EXPORT_SYMBOL(icst_hz_to_vco); diff --git a/arch/arm/common/icst307.c b/arch/arm/common/icst307.c deleted file mode 100644 index 6d094c157540..000000000000 --- a/arch/arm/common/icst307.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * linux/arch/arm/common/icst307.c - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST307 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - * - * This is an almost identical implementation to the ICST525 clock generator. - * The s2div and idx2s files are different - */ -#include <linux/module.h> -#include <linux/kernel.h> - -#include <asm/hardware/icst307.h> - -/* - * Divisors for each OD setting. - */ -static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 }; - -unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco) -{ - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]); -} - -EXPORT_SYMBOL(icst307_khz); - -/* - * Ascending divisor S values. - */ -static unsigned char idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 }; - -struct icst307_vco -icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq) -{ - struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f; - unsigned int i = 0, rd, best = (unsigned int)-1; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = freq * s2div[idx2s[i]]; - - /* - * f must be between 6MHz and 200MHz (3.3 or 5V) - */ - if (f > 6000 && f <= p->vco_max) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long fref_div, f_pll; - unsigned int vd; - int f_diff; - - fref_div = (2 * p->ref) / rd; - - vd = (f + fref_div / 2) / fref_div; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = fref_div * vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst307_khz_to_vco); - -struct icst307_vco -icst307_ps_to_vco(const struct icst307_params *p, unsigned long period) -{ - struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f, ps; - unsigned int i = 0, rd, best = (unsigned int)-1; - - ps = 1000000000UL / p->vco_max; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = period / s2div[idx2s[i]]; - - /* - * f must be between 6MHz and 200MHz (3.3 or 5V) - */ - if (f >= ps && f < 1000000000UL / 6000 + 1) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - ps = 500000000UL / p->ref; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long f_in_div, f_pll; - unsigned int vd; - int f_diff; - - f_in_div = ps * rd; - - vd = (f_in_div + f / 2) / f; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = (f_in_div + vd / 2) / vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst307_ps_to_vco); diff --git a/arch/arm/common/icst525.c b/arch/arm/common/icst525.c deleted file mode 100644 index 3d377c5bdef6..000000000000 --- a/arch/arm/common/icst525.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * linux/arch/arm/common/icst525.c - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST525 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - */ -#include <linux/module.h> -#include <linux/kernel.h> - -#include <asm/hardware/icst525.h> - -/* - * Divisors for each OD setting. - */ -static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 }; - -unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco) -{ - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]); -} - -EXPORT_SYMBOL(icst525_khz); - -/* - * Ascending divisor S values. - */ -static unsigned char idx2s[] = { 1, 3, 4, 7, 5, 2, 6, 0 }; - -struct icst525_vco -icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq) -{ - struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f; - unsigned int i = 0, rd, best = (unsigned int)-1; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = freq * s2div[idx2s[i]]; - - /* - * f must be between 10MHz and - * 320MHz (5V) or 200MHz (3V) - */ - if (f > 10000 && f <= p->vco_max) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long fref_div, f_pll; - unsigned int vd; - int f_diff; - - fref_div = (2 * p->ref) / rd; - - vd = (f + fref_div / 2) / fref_div; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = fref_div * vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst525_khz_to_vco); - -struct icst525_vco -icst525_ps_to_vco(const struct icst525_params *p, unsigned long period) -{ - struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max }; - unsigned long f, ps; - unsigned int i = 0, rd, best = (unsigned int)-1; - - ps = 1000000000UL / p->vco_max; - - /* - * First, find the PLL output divisor such - * that the PLL output is within spec. - */ - do { - f = period / s2div[idx2s[i]]; - - /* - * f must be between 10MHz and - * 320MHz (5V) or 200MHz (3V) - */ - if (f >= ps && f < 100000) - break; - } while (i < ARRAY_SIZE(idx2s)); - - if (i >= ARRAY_SIZE(idx2s)) - return vco; - - vco.s = idx2s[i]; - - ps = 500000000UL / p->ref; - - /* - * Now find the closest divisor combination - * which gives a PLL output of 'f'. - */ - for (rd = p->rd_min; rd <= p->rd_max; rd++) { - unsigned long f_in_div, f_pll; - unsigned int vd; - int f_diff; - - f_in_div = ps * rd; - - vd = (f_in_div + f / 2) / f; - if (vd < p->vd_min || vd > p->vd_max) - continue; - - f_pll = (f_in_div + vd / 2) / vd; - f_diff = f_pll - f; - if (f_diff < 0) - f_diff = -f_diff; - - if ((unsigned)f_diff < best) { - vco.v = vd - 8; - vco.r = rd - 2; - if (f_diff == 0) - break; - best = f_diff; - } - } - - return vco; -} - -EXPORT_SYMBOL(icst525_ps_to_vco); diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c new file mode 100644 index 000000000000..5ebbab6242a7 --- /dev/null +++ b/arch/arm/common/pl330.c @@ -0,0 +1,1966 @@ +/* linux/arch/arm/common/pl330.c + * + * Copyright (C) 2010 Samsung Electronics Co Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> + +#include <asm/hardware/pl330.h> + +/* Register and Bit field Definitions */ +#define DS 0x0 +#define DS_ST_STOP 0x0 +#define DS_ST_EXEC 0x1 +#define DS_ST_CMISS 0x2 +#define DS_ST_UPDTPC 0x3 +#define DS_ST_WFE 0x4 +#define DS_ST_ATBRR 0x5 +#define DS_ST_QBUSY 0x6 +#define DS_ST_WFP 0x7 +#define DS_ST_KILL 0x8 +#define DS_ST_CMPLT 0x9 +#define DS_ST_FLTCMP 0xe +#define DS_ST_FAULT 0xf + +#define DPC 0x4 +#define INTEN 0x20 +#define ES 0x24 +#define INTSTATUS 0x28 +#define INTCLR 0x2c +#define FSM 0x30 +#define FSC 0x34 +#define FTM 0x38 + +#define _FTC 0x40 +#define FTC(n) (_FTC + (n)*0x4) + +#define _CS 0x100 +#define CS(n) (_CS + (n)*0x8) +#define CS_CNS (1 << 21) + +#define _CPC 0x104 +#define CPC(n) (_CPC + (n)*0x8) + +#define _SA 0x400 +#define SA(n) (_SA + (n)*0x20) + +#define _DA 0x404 +#define DA(n) (_DA + (n)*0x20) + +#define _CC 0x408 +#define CC(n) (_CC + (n)*0x20) + +#define CC_SRCINC (1 << 0) +#define CC_DSTINC (1 << 14) +#define CC_SRCPRI (1 << 8) +#define CC_DSTPRI (1 << 22) +#define CC_SRCNS (1 << 9) +#define CC_DSTNS (1 << 23) +#define CC_SRCIA (1 << 10) +#define CC_DSTIA (1 << 24) +#define CC_SRCBRSTLEN_SHFT 4 +#define CC_DSTBRSTLEN_SHFT 18 +#define CC_SRCBRSTSIZE_SHFT 1 +#define CC_DSTBRSTSIZE_SHFT 15 +#define CC_SRCCCTRL_SHFT 11 +#define CC_SRCCCTRL_MASK 0x7 +#define CC_DSTCCTRL_SHFT 25 +#define CC_DRCCCTRL_MASK 0x7 +#define CC_SWAP_SHFT 28 + +#define _LC0 0x40c +#define LC0(n) (_LC0 + (n)*0x20) + +#define _LC1 0x410 +#define LC1(n) (_LC1 + (n)*0x20) + +#define DBGSTATUS 0xd00 +#define DBG_BUSY (1 << 0) + +#define DBGCMD 0xd04 +#define DBGINST0 0xd08 +#define DBGINST1 0xd0c + +#define CR0 0xe00 +#define CR1 0xe04 +#define CR2 0xe08 +#define CR3 0xe0c +#define CR4 0xe10 +#define CRD 0xe14 + +#define PERIPH_ID 0xfe0 +#define PCELL_ID 0xff0 + +#define CR0_PERIPH_REQ_SET (1 << 0) +#define CR0_BOOT_EN_SET (1 << 1) +#define CR0_BOOT_MAN_NS (1 << 2) +#define CR0_NUM_CHANS_SHIFT 4 +#define CR0_NUM_CHANS_MASK 0x7 +#define CR0_NUM_PERIPH_SHIFT 12 +#define CR0_NUM_PERIPH_MASK 0x1f +#define CR0_NUM_EVENTS_SHIFT 17 +#define CR0_NUM_EVENTS_MASK 0x1f + +#define CR1_ICACHE_LEN_SHIFT 0 +#define CR1_ICACHE_LEN_MASK 0x7 +#define CR1_NUM_ICACHELINES_SHIFT 4 +#define CR1_NUM_ICACHELINES_MASK 0xf + +#define CRD_DATA_WIDTH_SHIFT 0 +#define CRD_DATA_WIDTH_MASK 0x7 +#define CRD_WR_CAP_SHIFT 4 +#define CRD_WR_CAP_MASK 0x7 +#define CRD_WR_Q_DEP_SHIFT 8 +#define CRD_WR_Q_DEP_MASK 0xf +#define CRD_RD_CAP_SHIFT 12 +#define CRD_RD_CAP_MASK 0x7 +#define CRD_RD_Q_DEP_SHIFT 16 +#define CRD_RD_Q_DEP_MASK 0xf +#define CRD_DATA_BUFF_SHIFT 20 +#define CRD_DATA_BUFF_MASK 0x3ff + +#define PART 0x330 +#define DESIGNER 0x41 +#define REVISION 0x0 +#define INTEG_CFG 0x0 +#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12) \ + | (REVISION << 20) | (INTEG_CFG << 24)) + +#define PCELL_ID_VAL 0xb105f00d + +#define PL330_STATE_STOPPED (1 << 0) +#define PL330_STATE_EXECUTING (1 << 1) +#define PL330_STATE_WFE (1 << 2) +#define PL330_STATE_FAULTING (1 << 3) +#define PL330_STATE_COMPLETING (1 << 4) +#define PL330_STATE_WFP (1 << 5) +#define PL330_STATE_KILLING (1 << 6) +#define PL330_STATE_FAULT_COMPLETING (1 << 7) +#define PL330_STATE_CACHEMISS (1 << 8) +#define PL330_STATE_UPDTPC (1 << 9) +#define PL330_STATE_ATBARRIER (1 << 10) +#define PL330_STATE_QUEUEBUSY (1 << 11) +#define PL330_STATE_INVALID (1 << 15) + +#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \ + | PL330_STATE_WFE | PL330_STATE_FAULTING) + +#define CMD_DMAADDH 0x54 +#define CMD_DMAEND 0x00 +#define CMD_DMAFLUSHP 0x35 +#define CMD_DMAGO 0xa0 +#define CMD_DMALD 0x04 +#define CMD_DMALDP 0x25 +#define CMD_DMALP 0x20 +#define CMD_DMALPEND 0x28 +#define CMD_DMAKILL 0x01 +#define CMD_DMAMOV 0xbc +#define CMD_DMANOP 0x18 +#define CMD_DMARMB 0x12 +#define CMD_DMASEV 0x34 +#define CMD_DMAST 0x08 +#define CMD_DMASTP 0x29 +#define CMD_DMASTZ 0x0c +#define CMD_DMAWFE 0x36 +#define CMD_DMAWFP 0x30 +#define CMD_DMAWMB 0x13 + +#define SZ_DMAADDH 3 +#define SZ_DMAEND 1 +#define SZ_DMAFLUSHP 2 +#define SZ_DMALD 1 +#define SZ_DMALDP 2 +#define SZ_DMALP 2 +#define SZ_DMALPEND 2 +#define SZ_DMAKILL 1 +#define SZ_DMAMOV 6 +#define SZ_DMANOP 1 +#define SZ_DMARMB 1 +#define SZ_DMASEV 2 +#define SZ_DMAST 1 +#define SZ_DMASTP 2 +#define SZ_DMASTZ 1 +#define SZ_DMAWFE 2 +#define SZ_DMAWFP 2 +#define SZ_DMAWMB 1 +#define SZ_DMAGO 6 + +#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1) +#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7)) + +#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr)) +#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr)) + +/* + * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req + * at 1byte/burst for P<->M and M<->M respectively. + * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req + * should be enough for P<->M and M<->M respectively. + */ +#define MCODE_BUFF_PER_REQ 256 + +/* + * Mark a _pl330_req as free. + * We do it by writing DMAEND as the first instruction + * because no valid request is going to have DMAEND as + * its first instruction to execute. + */ +#define MARK_FREE(req) do { \ + _emit_END(0, (req)->mc_cpu); \ + (req)->mc_len = 0; \ + } while (0) + +/* If the _pl330_req is available to the client */ +#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) + +/* Use this _only_ to wait on transient states */ +#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax(); + +#ifdef PL330_DEBUG_MCGEN +static unsigned cmd_line; +#define PL330_DBGCMD_DUMP(off, x...) do { \ + printk("%x:", cmd_line); \ + printk(x); \ + cmd_line += off; \ + } while (0) +#define PL330_DBGMC_START(addr) (cmd_line = addr) +#else +#define PL330_DBGCMD_DUMP(off, x...) do {} while (0) +#define PL330_DBGMC_START(addr) do {} while (0) +#endif + +struct _xfer_spec { + u32 ccr; + struct pl330_req *r; + struct pl330_xfer *x; +}; + +enum dmamov_dst { + SAR = 0, + CCR, + DAR, +}; + +enum pl330_dst { + SRC = 0, + DST, +}; + +enum pl330_cond { + SINGLE, + BURST, + ALWAYS, +}; + +struct _pl330_req { + u32 mc_bus; + void *mc_cpu; + /* Number of bytes taken to setup MC for the req */ + u32 mc_len; + struct pl330_req *r; + /* Hook to attach to DMAC's list of reqs with due callback */ + struct list_head rqd; +}; + +/* ToBeDone for tasklet */ +struct _pl330_tbd { + bool reset_dmac; + bool reset_mngr; + u8 reset_chan; +}; + +/* A DMAC Thread */ +struct pl330_thread { + u8 id; + int ev; + /* If the channel is not yet acquired by any client */ + bool free; + /* Parent DMAC */ + struct pl330_dmac *dmac; + /* Only two at a time */ + struct _pl330_req req[2]; + /* Index of the last submitted request */ + unsigned lstenq; +}; + +enum pl330_dmac_state { + UNINIT, + INIT, + DYING, +}; + +/* A DMAC */ +struct pl330_dmac { + spinlock_t lock; + /* Holds list of reqs with due callbacks */ + struct list_head req_done; + /* Pointer to platform specific stuff */ + struct pl330_info *pinfo; + /* Maximum possible events/irqs */ + int events[32]; + /* BUS address of MicroCode buffer */ + u32 mcode_bus; + /* CPU address of MicroCode buffer */ + void *mcode_cpu; + /* List of all Channel threads */ + struct pl330_thread *channels; + /* Pointer to the MANAGER thread */ + struct pl330_thread *manager; + /* To handle bad news in interrupt */ + struct tasklet_struct tasks; + struct _pl330_tbd dmac_tbd; + /* State of DMAC operation */ + enum pl330_dmac_state state; +}; + +static inline void _callback(struct pl330_req *r, enum pl330_op_err err) +{ + if (r && r->xfer_cb) + r->xfer_cb(r->token, err); +} + +static inline bool _queue_empty(struct pl330_thread *thrd) +{ + return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1])) + ? true : false; +} + +static inline bool _queue_full(struct pl330_thread *thrd) +{ + return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1])) + ? false : true; +} + +static inline bool is_manager(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + + /* MANAGER is indexed at the end */ + if (thrd->id == pl330->pinfo->pcfg.num_chan) + return true; + else + return false; +} + +/* If manager of the thread is in Non-Secure mode */ +static inline bool _manager_ns(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + + return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false; +} + +static inline u32 get_id(struct pl330_info *pi, u32 off) +{ + void __iomem *regs = pi->base; + u32 id = 0; + + id |= (readb(regs + off + 0x0) << 0); + id |= (readb(regs + off + 0x4) << 8); + id |= (readb(regs + off + 0x8) << 16); + id |= (readb(regs + off + 0xc) << 24); + + return id; +} + +static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[], + enum pl330_dst da, u16 val) +{ + if (dry_run) + return SZ_DMAADDH; + + buf[0] = CMD_DMAADDH; + buf[0] |= (da << 1); + *((u16 *)&buf[1]) = val; + + PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n", + da == 1 ? "DA" : "SA", val); + + return SZ_DMAADDH; +} + +static inline u32 _emit_END(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAEND; + + buf[0] = CMD_DMAEND; + + PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n"); + + return SZ_DMAEND; +} + +static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri) +{ + if (dry_run) + return SZ_DMAFLUSHP; + + buf[0] = CMD_DMAFLUSHP; + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3); + + return SZ_DMAFLUSHP; +} + +static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond) +{ + if (dry_run) + return SZ_DMALD; + + buf[0] = CMD_DMALD; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); + + return SZ_DMALD; +} + +static inline u32 _emit_LDP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMALDP; + + buf[0] = CMD_DMALDP; + + if (cond == BURST) + buf[0] |= (1 << 1); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n", + cond == SINGLE ? 'S' : 'B', peri >> 3); + + return SZ_DMALDP; +} + +static inline u32 _emit_LP(unsigned dry_run, u8 buf[], + unsigned loop, u8 cnt) +{ + if (dry_run) + return SZ_DMALP; + + buf[0] = CMD_DMALP; + + if (loop) + buf[0] |= (1 << 1); + + cnt--; /* DMAC increments by 1 internally */ + buf[1] = cnt; + + PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt); + + return SZ_DMALP; +} + +struct _arg_LPEND { + enum pl330_cond cond; + bool forever; + unsigned loop; + u8 bjump; +}; + +static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[], + const struct _arg_LPEND *arg) +{ + enum pl330_cond cond = arg->cond; + bool forever = arg->forever; + unsigned loop = arg->loop; + u8 bjump = arg->bjump; + + if (dry_run) + return SZ_DMALPEND; + + buf[0] = CMD_DMALPEND; + + if (loop) + buf[0] |= (1 << 2); + + if (!forever) + buf[0] |= (1 << 4); + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + buf[1] = bjump; + + PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n", + forever ? "FE" : "END", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'), + loop ? '1' : '0', + bjump); + + return SZ_DMALPEND; +} + +static inline u32 _emit_KILL(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAKILL; + + buf[0] = CMD_DMAKILL; + + return SZ_DMAKILL; +} + +static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], + enum dmamov_dst dst, u32 val) +{ + if (dry_run) + return SZ_DMAMOV; + + buf[0] = CMD_DMAMOV; + buf[1] = dst; + *((u32 *)&buf[2]) = val; + + PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", + dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); + + return SZ_DMAMOV; +} + +static inline u32 _emit_NOP(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMANOP; + + buf[0] = CMD_DMANOP; + + PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n"); + + return SZ_DMANOP; +} + +static inline u32 _emit_RMB(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMARMB; + + buf[0] = CMD_DMARMB; + + PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n"); + + return SZ_DMARMB; +} + +static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev) +{ + if (dry_run) + return SZ_DMASEV; + + buf[0] = CMD_DMASEV; + + ev &= 0x1f; + ev <<= 3; + buf[1] = ev; + + PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3); + + return SZ_DMASEV; +} + +static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond) +{ + if (dry_run) + return SZ_DMAST; + + buf[0] = CMD_DMAST; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); + + return SZ_DMAST; +} + +static inline u32 _emit_STP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMASTP; + + buf[0] = CMD_DMASTP; + + if (cond == BURST) + buf[0] |= (1 << 1); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n", + cond == SINGLE ? 'S' : 'B', peri >> 3); + + return SZ_DMASTP; +} + +static inline u32 _emit_STZ(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMASTZ; + + buf[0] = CMD_DMASTZ; + + PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n"); + + return SZ_DMASTZ; +} + +static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev, + unsigned invalidate) +{ + if (dry_run) + return SZ_DMAWFE; + + buf[0] = CMD_DMAWFE; + + ev &= 0x1f; + ev <<= 3; + buf[1] = ev; + + if (invalidate) + buf[1] |= (1 << 1); + + PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n", + ev >> 3, invalidate ? ", I" : ""); + + return SZ_DMAWFE; +} + +static inline u32 _emit_WFP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMAWFP; + + buf[0] = CMD_DMAWFP; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (0 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (0 << 0); + else + buf[0] |= (0 << 1) | (1 << 0); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3); + + return SZ_DMAWFP; +} + +static inline u32 _emit_WMB(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAWMB; + + buf[0] = CMD_DMAWMB; + + PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n"); + + return SZ_DMAWMB; +} + +struct _arg_GO { + u8 chan; + u32 addr; + unsigned ns; +}; + +static inline u32 _emit_GO(unsigned dry_run, u8 buf[], + const struct _arg_GO *arg) +{ + u8 chan = arg->chan; + u32 addr = arg->addr; + unsigned ns = arg->ns; + + if (dry_run) + return SZ_DMAGO; + + buf[0] = CMD_DMAGO; + buf[0] |= (ns << 1); + + buf[1] = chan & 0x7; + + *((u32 *)&buf[2]) = addr; + + return SZ_DMAGO; +} + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +/* Returns Time-Out */ +static bool _until_dmac_idle(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + unsigned long loops = msecs_to_loops(5); + + do { + /* Until Manager is Idle */ + if (!(readl(regs + DBGSTATUS) & DBG_BUSY)) + break; + + cpu_relax(); + } while (--loops); + + if (!loops) + return true; + + return false; +} + +static inline void _execute_DBGINSN(struct pl330_thread *thrd, + u8 insn[], bool as_manager) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u32 val; + + val = (insn[0] << 16) | (insn[1] << 24); + if (!as_manager) { + val |= (1 << 0); + val |= (thrd->id << 8); /* Channel Number */ + } + writel(val, regs + DBGINST0); + + val = *((u32 *)&insn[2]); + writel(val, regs + DBGINST1); + + /* If timed out due to halted state-machine */ + if (_until_dmac_idle(thrd)) { + dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n"); + return; + } + + /* Get going */ + writel(0, regs + DBGCMD); +} + +static inline u32 _state(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u32 val; + + if (is_manager(thrd)) + val = readl(regs + DS) & 0xf; + else + val = readl(regs + CS(thrd->id)) & 0xf; + + switch (val) { + case DS_ST_STOP: + return PL330_STATE_STOPPED; + case DS_ST_EXEC: + return PL330_STATE_EXECUTING; + case DS_ST_CMISS: + return PL330_STATE_CACHEMISS; + case DS_ST_UPDTPC: + return PL330_STATE_UPDTPC; + case DS_ST_WFE: + return PL330_STATE_WFE; + case DS_ST_FAULT: + return PL330_STATE_FAULTING; + case DS_ST_ATBRR: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_ATBARRIER; + case DS_ST_QBUSY: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_QUEUEBUSY; + case DS_ST_WFP: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_WFP; + case DS_ST_KILL: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_KILLING; + case DS_ST_CMPLT: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_COMPLETING; + case DS_ST_FLTCMP: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_FAULT_COMPLETING; + default: + return PL330_STATE_INVALID; + } +} + +/* If the request 'req' of thread 'thrd' is currently active */ +static inline bool _req_active(struct pl330_thread *thrd, + struct _pl330_req *req) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id)); + + if (IS_FREE(req)) + return false; + + return (pc >= buf && pc <= buf + req->mc_len) ? true : false; +} + +/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */ +static inline unsigned _thrd_active(struct pl330_thread *thrd) +{ + if (_req_active(thrd, &thrd->req[0])) + return 1; /* First req active */ + + if (_req_active(thrd, &thrd->req[1])) + return 2; /* Second req active */ + + return 0; +} + +static void _stop(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u8 insn[6] = {0, 0, 0, 0, 0, 0}; + + if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) + UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); + + /* Return if nothing needs to be done */ + if (_state(thrd) == PL330_STATE_COMPLETING + || _state(thrd) == PL330_STATE_KILLING + || _state(thrd) == PL330_STATE_STOPPED) + return; + + _emit_KILL(0, insn); + + /* Stop generating interrupts for SEV */ + writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN); + + _execute_DBGINSN(thrd, insn, is_manager(thrd)); +} + +/* Start doing req 'idx' of thread 'thrd' */ +static bool _trigger(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + struct _pl330_req *req; + struct pl330_req *r; + struct _arg_GO go; + unsigned ns; + u8 insn[6] = {0, 0, 0, 0, 0, 0}; + + /* Return if already ACTIVE */ + if (_state(thrd) != PL330_STATE_STOPPED) + return true; + + if (!IS_FREE(&thrd->req[1 - thrd->lstenq])) + req = &thrd->req[1 - thrd->lstenq]; + else if (!IS_FREE(&thrd->req[thrd->lstenq])) + req = &thrd->req[thrd->lstenq]; + else + req = NULL; + + /* Return if no request */ + if (!req || !req->r) + return true; + + r = req->r; + + if (r->cfg) + ns = r->cfg->nonsecure ? 1 : 0; + else if (readl(regs + CS(thrd->id)) & CS_CNS) + ns = 1; + else + ns = 0; + + /* See 'Abort Sources' point-4 at Page 2-25 */ + if (_manager_ns(thrd) && !ns) + dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n", + __func__, __LINE__); + + go.chan = thrd->id; + go.addr = req->mc_bus; + go.ns = ns; + _emit_GO(0, insn, &go); + + /* Set to generate interrupts for SEV */ + writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN); + + /* Only manager can execute GO */ + _execute_DBGINSN(thrd, insn, true); + + return true; +} + +static bool _start(struct pl330_thread *thrd) +{ + switch (_state(thrd)) { + case PL330_STATE_FAULT_COMPLETING: + UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); + + if (_state(thrd) == PL330_STATE_KILLING) + UNTIL(thrd, PL330_STATE_STOPPED) + + case PL330_STATE_FAULTING: + _stop(thrd); + + case PL330_STATE_KILLING: + case PL330_STATE_COMPLETING: + UNTIL(thrd, PL330_STATE_STOPPED) + + case PL330_STATE_STOPPED: + return _trigger(thrd); + + case PL330_STATE_WFP: + case PL330_STATE_QUEUEBUSY: + case PL330_STATE_ATBARRIER: + case PL330_STATE_UPDTPC: + case PL330_STATE_CACHEMISS: + case PL330_STATE_EXECUTING: + return true; + + case PL330_STATE_WFE: /* For RESUME, nothing yet */ + default: + return false; + } +} + +static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + while (cyc--) { + off += _emit_LD(dry_run, &buf[off], ALWAYS); + off += _emit_RMB(dry_run, &buf[off]); + off += _emit_ST(dry_run, &buf[off], ALWAYS); + off += _emit_WMB(dry_run, &buf[off]); + } + + return off; +} + +static inline int _ldst_devtomem(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + while (cyc--) { + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_ST(dry_run, &buf[off], ALWAYS); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + } + + return off; +} + +static inline int _ldst_memtodev(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + while (cyc--) { + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_LD(dry_run, &buf[off], ALWAYS); + off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + } + + return off; +} + +static int _bursts(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + switch (pxs->r->rqtype) { + case MEMTODEV: + off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc); + break; + case DEVTOMEM: + off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc); + break; + case MEMTOMEM: + off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); + break; + default: + off += 0x40000000; /* Scare off the Client */ + break; + } + + return off; +} + +/* Returns bytes consumed and updates bursts */ +static inline int _loop(unsigned dry_run, u8 buf[], + unsigned long *bursts, const struct _xfer_spec *pxs) +{ + int cyc, cycmax, szlp, szlpend, szbrst, off; + unsigned lcnt0, lcnt1, ljmp0, ljmp1; + struct _arg_LPEND lpend; + + /* Max iterations possibile in DMALP is 256 */ + if (*bursts >= 256*256) { + lcnt1 = 256; + lcnt0 = 256; + cyc = *bursts / lcnt1 / lcnt0; + } else if (*bursts > 256) { + lcnt1 = 256; + lcnt0 = *bursts / lcnt1; + cyc = 1; + } else { + lcnt1 = *bursts; + lcnt0 = 0; + cyc = 1; + } + + szlp = _emit_LP(1, buf, 0, 0); + szbrst = _bursts(1, buf, pxs, 1); + + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 0; + lpend.bjump = 0; + szlpend = _emit_LPEND(1, buf, &lpend); + + if (lcnt0) { + szlp *= 2; + szlpend *= 2; + } + + /* + * Max bursts that we can unroll due to limit on the + * size of backward jump that can be encoded in DMALPEND + * which is 8-bits and hence 255 + */ + cycmax = (255 - (szlp + szlpend)) / szbrst; + + cyc = (cycmax < cyc) ? cycmax : cyc; + + off = 0; + + if (lcnt0) { + off += _emit_LP(dry_run, &buf[off], 0, lcnt0); + ljmp0 = off; + } + + off += _emit_LP(dry_run, &buf[off], 1, lcnt1); + ljmp1 = off; + + off += _bursts(dry_run, &buf[off], pxs, cyc); + + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 1; + lpend.bjump = off - ljmp1; + off += _emit_LPEND(dry_run, &buf[off], &lpend); + + if (lcnt0) { + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 0; + lpend.bjump = off - ljmp0; + off += _emit_LPEND(dry_run, &buf[off], &lpend); + } + + *bursts = lcnt1 * cyc; + if (lcnt0) + *bursts *= lcnt0; + + return off; +} + +static inline int _setup_loops(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs) +{ + struct pl330_xfer *x = pxs->x; + u32 ccr = pxs->ccr; + unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); + int off = 0; + + while (bursts) { + c = bursts; + off += _loop(dry_run, &buf[off], &c, pxs); + bursts -= c; + } + + return off; +} + +static inline int _setup_xfer(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs) +{ + struct pl330_xfer *x = pxs->x; + int off = 0; + + /* DMAMOV SAR, x->src_addr */ + off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr); + /* DMAMOV DAR, x->dst_addr */ + off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr); + + /* Setup Loop(s) */ + off += _setup_loops(dry_run, &buf[off], pxs); + + return off; +} + +/* + * A req is a sequence of one or more xfer units. + * Returns the number of bytes taken to setup the MC for the req. + */ +static int _setup_req(unsigned dry_run, struct pl330_thread *thrd, + unsigned index, struct _xfer_spec *pxs) +{ + struct _pl330_req *req = &thrd->req[index]; + struct pl330_xfer *x; + u8 *buf = req->mc_cpu; + int off = 0; + + PL330_DBGMC_START(req->mc_bus); + + /* DMAMOV CCR, ccr */ + off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); + + x = pxs->r->x; + do { + /* Error if xfer length is not aligned at burst size */ + if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) + return -EINVAL; + + pxs->x = x; + off += _setup_xfer(dry_run, &buf[off], pxs); + + x = x->next; + } while (x); + + /* DMASEV peripheral/event */ + off += _emit_SEV(dry_run, &buf[off], thrd->ev); + /* DMAEND */ + off += _emit_END(dry_run, &buf[off]); + + return off; +} + +static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) +{ + u32 ccr = 0; + + if (rqc->src_inc) + ccr |= CC_SRCINC; + + if (rqc->dst_inc) + ccr |= CC_DSTINC; + + /* We set same protection levels for Src and DST for now */ + if (rqc->privileged) + ccr |= CC_SRCPRI | CC_DSTPRI; + if (rqc->nonsecure) + ccr |= CC_SRCNS | CC_DSTNS; + if (rqc->insnaccess) + ccr |= CC_SRCIA | CC_DSTIA; + + ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT); + ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT); + + ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); + ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); + + ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT); + ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT); + + ccr |= (rqc->swap << CC_SWAP_SHFT); + + return ccr; +} + +static inline bool _is_valid(u32 ccr) +{ + enum pl330_dstcachectrl dcctl; + enum pl330_srccachectrl scctl; + + dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK; + scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK; + + if (dcctl == DINVALID1 || dcctl == DINVALID2 + || scctl == SINVALID1 || scctl == SINVALID2) + return false; + else + return true; +} + +/* + * Submit a list of xfers after which the client wants notification. + * Client is not notified after each xfer unit, just once after all + * xfer units are done or some error occurs. + */ +int pl330_submit_req(void *ch_id, struct pl330_req *r) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + struct pl330_info *pi; + struct _xfer_spec xs; + unsigned long flags; + void __iomem *regs; + unsigned idx; + u32 ccr; + int ret = 0; + + /* No Req or Unacquired Channel or DMAC */ + if (!r || !thrd || thrd->free) + return -EINVAL; + + pl330 = thrd->dmac; + pi = pl330->pinfo; + regs = pi->base; + + if (pl330->state == DYING + || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { + dev_info(thrd->dmac->pinfo->dev, "%s:%d\n", + __func__, __LINE__); + return -EAGAIN; + } + + /* If request for non-existing peripheral */ + if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) { + dev_info(thrd->dmac->pinfo->dev, + "%s:%d Invalid peripheral(%u)!\n", + __func__, __LINE__, r->peri); + return -EINVAL; + } + + spin_lock_irqsave(&pl330->lock, flags); + + if (_queue_full(thrd)) { + ret = -EAGAIN; + goto xfer_exit; + } + + /* Prefer Secure Channel */ + if (!_manager_ns(thrd)) + r->cfg->nonsecure = 0; + else + r->cfg->nonsecure = 1; + + /* Use last settings, if not provided */ + if (r->cfg) + ccr = _prepare_ccr(r->cfg); + else + ccr = readl(regs + CC(thrd->id)); + + /* If this req doesn't have valid xfer settings */ + if (!_is_valid(ccr)) { + ret = -EINVAL; + dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n", + __func__, __LINE__, ccr); + goto xfer_exit; + } + + idx = IS_FREE(&thrd->req[0]) ? 0 : 1; + + xs.ccr = ccr; + xs.r = r; + + /* First dry run to check if req is acceptable */ + ret = _setup_req(1, thrd, idx, &xs); + if (ret < 0) + goto xfer_exit; + + if (ret > pi->mcbufsz / 2) { + dev_info(thrd->dmac->pinfo->dev, + "%s:%d Trying increasing mcbufsz\n", + __func__, __LINE__); + ret = -ENOMEM; + goto xfer_exit; + } + + /* Hook the request */ + thrd->lstenq = idx; + thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs); + thrd->req[idx].r = r; + + ret = 0; + +xfer_exit: + spin_unlock_irqrestore(&pl330->lock, flags); + + return ret; +} +EXPORT_SYMBOL(pl330_submit_req); + +static void pl330_dotask(unsigned long data) +{ + struct pl330_dmac *pl330 = (struct pl330_dmac *) data; + struct pl330_info *pi = pl330->pinfo; + unsigned long flags; + int i; + + spin_lock_irqsave(&pl330->lock, flags); + + /* The DMAC itself gone nuts */ + if (pl330->dmac_tbd.reset_dmac) { + pl330->state = DYING; + /* Reset the manager too */ + pl330->dmac_tbd.reset_mngr = true; + /* Clear the reset flag */ + pl330->dmac_tbd.reset_dmac = false; + } + + if (pl330->dmac_tbd.reset_mngr) { + _stop(pl330->manager); + /* Reset all channels */ + pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1; + /* Clear the reset flag */ + pl330->dmac_tbd.reset_mngr = false; + } + + for (i = 0; i < pi->pcfg.num_chan; i++) { + + if (pl330->dmac_tbd.reset_chan & (1 << i)) { + struct pl330_thread *thrd = &pl330->channels[i]; + void __iomem *regs = pi->base; + enum pl330_op_err err; + + _stop(thrd); + + if (readl(regs + FSC) & (1 << thrd->id)) + err = PL330_ERR_FAIL; + else + err = PL330_ERR_ABORT; + + spin_unlock_irqrestore(&pl330->lock, flags); + + _callback(thrd->req[1 - thrd->lstenq].r, err); + _callback(thrd->req[thrd->lstenq].r, err); + + spin_lock_irqsave(&pl330->lock, flags); + + thrd->req[0].r = NULL; + thrd->req[1].r = NULL; + MARK_FREE(&thrd->req[0]); + MARK_FREE(&thrd->req[1]); + + /* Clear the reset flag */ + pl330->dmac_tbd.reset_chan &= ~(1 << i); + } + } + + spin_unlock_irqrestore(&pl330->lock, flags); + + return; +} + +/* Returns 1 if state was updated, 0 otherwise */ +int pl330_update(const struct pl330_info *pi) +{ + struct _pl330_req *rqdone; + struct pl330_dmac *pl330; + unsigned long flags; + void __iomem *regs; + u32 val; + int id, ev, ret = 0; + + if (!pi || !pi->pl330_data) + return 0; + + regs = pi->base; + pl330 = pi->pl330_data; + + spin_lock_irqsave(&pl330->lock, flags); + + val = readl(regs + FSM) & 0x1; + if (val) + pl330->dmac_tbd.reset_mngr = true; + else + pl330->dmac_tbd.reset_mngr = false; + + val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1); + pl330->dmac_tbd.reset_chan |= val; + if (val) { + int i = 0; + while (i < pi->pcfg.num_chan) { + if (val & (1 << i)) { + dev_info(pi->dev, + "Reset Channel-%d\t CS-%x FTC-%x\n", + i, readl(regs + CS(i)), + readl(regs + FTC(i))); + _stop(&pl330->channels[i]); + } + i++; + } + } + + /* Check which event happened i.e, thread notified */ + val = readl(regs + ES); + if (pi->pcfg.num_events < 32 + && val & ~((1 << pi->pcfg.num_events) - 1)) { + pl330->dmac_tbd.reset_dmac = true; + dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__); + ret = 1; + goto updt_exit; + } + + for (ev = 0; ev < pi->pcfg.num_events; ev++) { + if (val & (1 << ev)) { /* Event occured */ + struct pl330_thread *thrd; + u32 inten = readl(regs + INTEN); + int active; + + /* Clear the event */ + if (inten & (1 << ev)) + writel(1 << ev, regs + INTCLR); + + ret = 1; + + id = pl330->events[ev]; + + thrd = &pl330->channels[id]; + + active = _thrd_active(thrd); + if (!active) /* Aborted */ + continue; + + active -= 1; + + rqdone = &thrd->req[active]; + MARK_FREE(rqdone); + + /* Get going again ASAP */ + _start(thrd); + + /* For now, just make a list of callbacks to be done */ + list_add_tail(&rqdone->rqd, &pl330->req_done); + } + } + + /* Now that we are in no hurry, do the callbacks */ + while (!list_empty(&pl330->req_done)) { + rqdone = container_of(pl330->req_done.next, + struct _pl330_req, rqd); + + list_del_init(&rqdone->rqd); + + spin_unlock_irqrestore(&pl330->lock, flags); + _callback(rqdone->r, PL330_ERR_NONE); + spin_lock_irqsave(&pl330->lock, flags); + } + +updt_exit: + spin_unlock_irqrestore(&pl330->lock, flags); + + if (pl330->dmac_tbd.reset_dmac + || pl330->dmac_tbd.reset_mngr + || pl330->dmac_tbd.reset_chan) { + ret = 1; + tasklet_schedule(&pl330->tasks); + } + + return ret; +} +EXPORT_SYMBOL(pl330_update); + +int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + unsigned long flags; + int ret = 0, active; + + if (!thrd || thrd->free || thrd->dmac->state == DYING) + return -EINVAL; + + pl330 = thrd->dmac; + + spin_lock_irqsave(&pl330->lock, flags); + + switch (op) { + case PL330_OP_FLUSH: + /* Make sure the channel is stopped */ + _stop(thrd); + + thrd->req[0].r = NULL; + thrd->req[1].r = NULL; + MARK_FREE(&thrd->req[0]); + MARK_FREE(&thrd->req[1]); + break; + + case PL330_OP_ABORT: + active = _thrd_active(thrd); + + /* Make sure the channel is stopped */ + _stop(thrd); + + /* ABORT is only for the active req */ + if (!active) + break; + + active--; + + thrd->req[active].r = NULL; + MARK_FREE(&thrd->req[active]); + + /* Start the next */ + case PL330_OP_START: + if (!_start(thrd)) + ret = -EIO; + break; + + default: + ret = -EINVAL; + } + + spin_unlock_irqrestore(&pl330->lock, flags); + return ret; +} +EXPORT_SYMBOL(pl330_chan_ctrl); + +int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + struct pl330_info *pi; + void __iomem *regs; + int active; + u32 val; + + if (!pstatus || !thrd || thrd->free) + return -EINVAL; + + pl330 = thrd->dmac; + pi = pl330->pinfo; + regs = pi->base; + + /* The client should remove the DMAC and add again */ + if (pl330->state == DYING) + pstatus->dmac_halted = true; + else + pstatus->dmac_halted = false; + + val = readl(regs + FSC); + if (val & (1 << thrd->id)) + pstatus->faulting = true; + else + pstatus->faulting = false; + + active = _thrd_active(thrd); + + if (!active) { + /* Indicate that the thread is not running */ + pstatus->top_req = NULL; + pstatus->wait_req = NULL; + } else { + active--; + pstatus->top_req = thrd->req[active].r; + pstatus->wait_req = !IS_FREE(&thrd->req[1 - active]) + ? thrd->req[1 - active].r : NULL; + } + + pstatus->src_addr = readl(regs + SA(thrd->id)); + pstatus->dst_addr = readl(regs + DA(thrd->id)); + + return 0; +} +EXPORT_SYMBOL(pl330_chan_status); + +/* Reserve an event */ +static inline int _alloc_event(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + int ev; + + for (ev = 0; ev < pi->pcfg.num_events; ev++) + if (pl330->events[ev] == -1) { + pl330->events[ev] = thrd->id; + return ev; + } + + return -1; +} + +/* Upon success, returns IdentityToken for the + * allocated channel, NULL otherwise. + */ +void *pl330_request_channel(const struct pl330_info *pi) +{ + struct pl330_thread *thrd = NULL; + struct pl330_dmac *pl330; + unsigned long flags; + int chans, i; + + if (!pi || !pi->pl330_data) + return NULL; + + pl330 = pi->pl330_data; + + if (pl330->state == DYING) + return NULL; + + chans = pi->pcfg.num_chan; + + spin_lock_irqsave(&pl330->lock, flags); + + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + if (thrd->free) { + thrd->ev = _alloc_event(thrd); + if (thrd->ev >= 0) { + thrd->free = false; + thrd->lstenq = 1; + thrd->req[0].r = NULL; + MARK_FREE(&thrd->req[0]); + thrd->req[1].r = NULL; + MARK_FREE(&thrd->req[1]); + break; + } + } + thrd = NULL; + } + + spin_unlock_irqrestore(&pl330->lock, flags); + + return thrd; +} +EXPORT_SYMBOL(pl330_request_channel); + +/* Release an event */ +static inline void _free_event(struct pl330_thread *thrd, int ev) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + + /* If the event is valid and was held by the thread */ + if (ev >= 0 && ev < pi->pcfg.num_events + && pl330->events[ev] == thrd->id) + pl330->events[ev] = -1; +} + +void pl330_release_channel(void *ch_id) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + unsigned long flags; + + if (!thrd || thrd->free) + return; + + _stop(thrd); + + _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT); + _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT); + + pl330 = thrd->dmac; + + spin_lock_irqsave(&pl330->lock, flags); + _free_event(thrd, thrd->ev); + thrd->free = true; + spin_unlock_irqrestore(&pl330->lock, flags); +} +EXPORT_SYMBOL(pl330_release_channel); + +/* Initialize the structure for PL330 configuration, that can be used + * by the client driver the make best use of the DMAC + */ +static void read_dmac_config(struct pl330_info *pi) +{ + void __iomem *regs = pi->base; + u32 val; + + val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; + val &= CRD_DATA_WIDTH_MASK; + pi->pcfg.data_bus_width = 8 * (1 << val); + + val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; + val &= CRD_DATA_BUFF_MASK; + pi->pcfg.data_buf_dep = val + 1; + + val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; + val &= CR0_NUM_CHANS_MASK; + val += 1; + pi->pcfg.num_chan = val; + + val = readl(regs + CR0); + if (val & CR0_PERIPH_REQ_SET) { + val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; + val += 1; + pi->pcfg.num_peri = val; + pi->pcfg.peri_ns = readl(regs + CR4); + } else { + pi->pcfg.num_peri = 0; + } + + val = readl(regs + CR0); + if (val & CR0_BOOT_MAN_NS) + pi->pcfg.mode |= DMAC_MODE_NS; + else + pi->pcfg.mode &= ~DMAC_MODE_NS; + + val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; + val &= CR0_NUM_EVENTS_MASK; + val += 1; + pi->pcfg.num_events = val; + + pi->pcfg.irq_ns = readl(regs + CR3); + + pi->pcfg.periph_id = get_id(pi, PERIPH_ID); + pi->pcfg.pcell_id = get_id(pi, PCELL_ID); +} + +static inline void _reset_thread(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + + thrd->req[0].mc_cpu = pl330->mcode_cpu + + (thrd->id * pi->mcbufsz); + thrd->req[0].mc_bus = pl330->mcode_bus + + (thrd->id * pi->mcbufsz); + thrd->req[0].r = NULL; + MARK_FREE(&thrd->req[0]); + + thrd->req[1].mc_cpu = thrd->req[0].mc_cpu + + pi->mcbufsz / 2; + thrd->req[1].mc_bus = thrd->req[0].mc_bus + + pi->mcbufsz / 2; + thrd->req[1].r = NULL; + MARK_FREE(&thrd->req[1]); +} + +static int dmac_alloc_threads(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + struct pl330_thread *thrd; + int i; + + /* Allocate 1 Manager and 'chans' Channel threads */ + pl330->channels = kzalloc((1 + chans) * sizeof(*thrd), + GFP_KERNEL); + if (!pl330->channels) + return -ENOMEM; + + /* Init Channel threads */ + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + thrd->id = i; + thrd->dmac = pl330; + _reset_thread(thrd); + thrd->free = true; + } + + /* MANAGER is indexed at the end */ + thrd = &pl330->channels[chans]; + thrd->id = chans; + thrd->dmac = pl330; + thrd->free = false; + pl330->manager = thrd; + + return 0; +} + +static int dmac_alloc_resources(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + int ret; + + /* + * Alloc MicroCode buffer for 'chans' Channel threads. + * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) + */ + pl330->mcode_cpu = dma_alloc_coherent(pi->dev, + chans * pi->mcbufsz, + &pl330->mcode_bus, GFP_KERNEL); + if (!pl330->mcode_cpu) { + dev_err(pi->dev, "%s:%d Can't allocate memory!\n", + __func__, __LINE__); + return -ENOMEM; + } + + ret = dmac_alloc_threads(pl330); + if (ret) { + dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n", + __func__, __LINE__); + dma_free_coherent(pi->dev, + chans * pi->mcbufsz, + pl330->mcode_cpu, pl330->mcode_bus); + return ret; + } + + return 0; +} + +int pl330_add(struct pl330_info *pi) +{ + struct pl330_dmac *pl330; + void __iomem *regs; + int i, ret; + + if (!pi || !pi->dev) + return -EINVAL; + + /* If already added */ + if (pi->pl330_data) + return -EINVAL; + + /* + * If the SoC can perform reset on the DMAC, then do it + * before reading its configuration. + */ + if (pi->dmac_reset) + pi->dmac_reset(pi); + + regs = pi->base; + + /* Check if we can handle this DMAC */ + if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL + || get_id(pi, PCELL_ID) != PCELL_ID_VAL) { + dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n", + readl(regs + PERIPH_ID), readl(regs + PCELL_ID)); + return -EINVAL; + } + + /* Read the configuration of the DMAC */ + read_dmac_config(pi); + + if (pi->pcfg.num_events == 0) { + dev_err(pi->dev, "%s:%d Can't work without events!\n", + __func__, __LINE__); + return -EINVAL; + } + + pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL); + if (!pl330) { + dev_err(pi->dev, "%s:%d Can't allocate memory!\n", + __func__, __LINE__); + return -ENOMEM; + } + + /* Assign the info structure and private data */ + pl330->pinfo = pi; + pi->pl330_data = pl330; + + spin_lock_init(&pl330->lock); + + INIT_LIST_HEAD(&pl330->req_done); + + /* Use default MC buffer size if not provided */ + if (!pi->mcbufsz) + pi->mcbufsz = MCODE_BUFF_PER_REQ * 2; + + /* Mark all events as free */ + for (i = 0; i < pi->pcfg.num_events; i++) + pl330->events[i] = -1; + + /* Allocate resources needed by the DMAC */ + ret = dmac_alloc_resources(pl330); + if (ret) { + dev_err(pi->dev, "Unable to create channels for DMAC\n"); + kfree(pl330); + return ret; + } + + tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330); + + pl330->state = INIT; + + return 0; +} +EXPORT_SYMBOL(pl330_add); + +static int dmac_free_threads(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + struct pl330_thread *thrd; + int i; + + /* Release Channel threads */ + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + pl330_release_channel((void *)thrd); + } + + /* Free memory */ + kfree(pl330->channels); + + return 0; +} + +static void dmac_free_resources(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + + dmac_free_threads(pl330); + + dma_free_coherent(pi->dev, chans * pi->mcbufsz, + pl330->mcode_cpu, pl330->mcode_bus); +} + +void pl330_del(struct pl330_info *pi) +{ + struct pl330_dmac *pl330; + + if (!pi || !pi->pl330_data) + return; + + pl330 = pi->pl330_data; + + pl330->state = UNINIT; + + tasklet_kill(&pl330->tasks); + + /* Free DMAC resources */ + dmac_free_resources(pl330); + + kfree(pl330); + pi->pl330_data = NULL; +} +EXPORT_SYMBOL(pl330_del); diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 1cf999ade4bc..ba65f6eedca6 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -266,13 +266,53 @@ static int vic_set_wake(unsigned int irq, unsigned int on) #endif /* CONFIG_PM */ static struct irq_chip vic_chip = { - .name = "VIC", - .ack = vic_ack_irq, - .mask = vic_mask_irq, - .unmask = vic_unmask_irq, - .set_wake = vic_set_wake, + .name = "VIC", + .ack = vic_ack_irq, + .mask = vic_mask_irq, + .unmask = vic_unmask_irq, + .set_wake = vic_set_wake, }; +static void __init vic_disable(void __iomem *base) +{ + writel(0, base + VIC_INT_SELECT); + writel(0, base + VIC_INT_ENABLE); + writel(~0, base + VIC_INT_ENABLE_CLEAR); + writel(0, base + VIC_IRQ_STATUS); + writel(0, base + VIC_ITCR); + writel(~0, base + VIC_INT_SOFT_CLEAR); +} + +static void __init vic_clear_interrupts(void __iomem *base) +{ + unsigned int i; + + writel(0, base + VIC_PL190_VECT_ADDR); + for (i = 0; i < 19; i++) { + unsigned int value; + + value = readl(base + VIC_PL190_VECT_ADDR); + writel(value, base + VIC_PL190_VECT_ADDR); + } +} + +static void __init vic_set_irq_sources(void __iomem *base, + unsigned int irq_start, u32 vic_sources) +{ + unsigned int i; + + for (i = 0; i < 32; i++) { + if (vic_sources & (1 << i)) { + unsigned int irq = irq_start + i; + + set_irq_chip(irq, &vic_chip); + set_irq_chip_data(irq, base); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + } +} + /* * The PL190 cell from ARM has been modified by ST to handle 64 interrupts. * The original cell has 32 interrupts, while the modified one has 64, @@ -287,13 +327,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0; /* Disable all interrupts initially. */ - - writel(0, base + VIC_INT_SELECT); - writel(0, base + VIC_INT_ENABLE); - writel(~0, base + VIC_INT_ENABLE_CLEAR); - writel(0, base + VIC_IRQ_STATUS); - writel(0, base + VIC_ITCR); - writel(~0, base + VIC_INT_SOFT_CLEAR); + vic_disable(base); /* * Make sure we clear all existing interrupts. The vector registers @@ -302,13 +336,8 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, * the second base address, which is 0x20 in the page */ if (vic_2nd_block) { - writel(0, base + VIC_PL190_VECT_ADDR); - for (i = 0; i < 19; i++) { - unsigned int value; + vic_clear_interrupts(base); - value = readl(base + VIC_PL190_VECT_ADDR); - writel(value, base + VIC_PL190_VECT_ADDR); - } /* ST has 16 vectors as well, but we don't enable them by now */ for (i = 0; i < 16; i++) { void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); @@ -318,16 +347,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start, writel(32, base + VIC_PL190_DEF_VECT_ADDR); } - for (i = 0; i < 32; i++) { - if (vic_sources & (1 << i)) { - unsigned int irq = irq_start + i; - - set_irq_chip(irq, &vic_chip); - set_irq_chip_data(irq, base); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - } + vic_set_irq_sources(base, irq_start, vic_sources); } /** @@ -365,37 +385,14 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, } /* Disable all interrupts initially. */ + vic_disable(base); - writel(0, base + VIC_INT_SELECT); - writel(0, base + VIC_INT_ENABLE); - writel(~0, base + VIC_INT_ENABLE_CLEAR); - writel(0, base + VIC_IRQ_STATUS); - writel(0, base + VIC_ITCR); - writel(~0, base + VIC_INT_SOFT_CLEAR); - - /* - * Make sure we clear all existing interrupts - */ - writel(0, base + VIC_PL190_VECT_ADDR); - for (i = 0; i < 19; i++) { - unsigned int value; - - value = readl(base + VIC_PL190_VECT_ADDR); - writel(value, base + VIC_PL190_VECT_ADDR); - } + /* Make sure we clear all existing interrupts */ + vic_clear_interrupts(base); vic_init2(base); - for (i = 0; i < 32; i++) { - if (vic_sources & (1 << i)) { - unsigned int irq = irq_start + i; - - set_irq_chip(irq, &vic_chip); - set_irq_chip_data(irq, base); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - } + vic_set_irq_sources(base, irq_start, vic_sources); vic_pm_register(base, irq_start, resume_sources); } diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig new file mode 100644 index 000000000000..d5c088149e46 --- /dev/null +++ b/arch/arm/configs/cns3420vb_defconfig @@ -0,0 +1,831 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.34-rc6 +# Sun May 2 21:58:08 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV6=y +CONFIG_OPROFILE_ARM11_CORE=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_FREEZER is not set +# CONFIG_CGROUP_DEVICE is not set +# CONFIG_CPUSETS is not set +# CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=m +# CONFIG_CFQ_GROUP_IOSCHED is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_CLPS711X is not set +CONFIG_ARCH_CNS3XXX=y +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# CNS3XXX platform type +# +CONFIG_MACH_CNS3420VB=y + +# +# Processor Type +# +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y +# CONFIG_ARM_ERRATA_411920 is not set +CONFIG_ARM_GIC=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=20000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +# CONFIG_SATA_PMP is not set +# CONFIG_ATA_SFF is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# Caches +# +CONFIG_FSCACHE=y +# CONFIG_FSCACHE_STATS is not set +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +# CONFIG_CACHEFILES is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LKDTM is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index 03f76cfc941c..4b55dcb60029 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Tue Jan 5 13:55:22 2010 +# Linux kernel version: 2.6.34-rc5 +# Wed Apr 28 11:23:19 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,6 +19,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -32,6 +34,12 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -52,7 +60,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -85,10 +92,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y @@ -104,6 +115,7 @@ CONFIG_HAVE_CLK=y # # GCOV-based kernel profiling # +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -170,6 +182,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -179,7 +192,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -196,21 +208,26 @@ CONFIG_ARCH_MMP=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set # CONFIG_MACH_TAVOREVB is not set # @@ -218,8 +235,10 @@ CONFIG_ARCH_MMP=y # # CONFIG_MACH_ASPENITE is not set # CONFIG_MACH_ZYLONITE2 is not set +# CONFIG_MACH_AVENGERS_LITE is not set # CONFIG_MACH_TTC_DKB is not set CONFIG_MACH_FLINT=y +CONFIG_MACH_MARVELL_JASPER=y CONFIG_CPU_MMP2=y CONFIG_PLAT_PXA=y @@ -246,7 +265,10 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_TAUROS2=y CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_COMMON_CLKDEV=y @@ -298,7 +320,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M user_debug=255" +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -338,7 +360,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -532,6 +553,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -640,6 +662,7 @@ CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set @@ -667,6 +690,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_PXA=y # CONFIG_I2C_PXA_SLAVE is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -679,15 +703,9 @@ CONFIG_I2C_PXA=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # @@ -702,13 +720,16 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -737,10 +758,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # CONFIG_MFD_CORE=y +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -749,24 +772,27 @@ CONFIG_MFD_CORE=y # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +CONFIG_MFD_MAX8925=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -CONFIG_MFD_88PM8607=y CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_DUMMY is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set -CONFIG_REGULATOR_MAX8660=y +CONFIG_REGULATOR_MAX8649=y +# CONFIG_REGULATOR_MAX8660 is not set +CONFIG_REGULATOR_MAX8925=y # CONFIG_REGULATOR_LP3971 is not set # CONFIG_REGULATOR_TPS65023 is not set # CONFIG_REGULATOR_TPS6507X is not set -CONFIG_REGULATOR_88PM8607=y # CONFIG_MEDIA_SUPPORT is not set # @@ -781,6 +807,7 @@ CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_MAX8925=y # # Display device support @@ -821,6 +848,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_MAX8925=y # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set @@ -872,7 +900,6 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set -CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y @@ -883,7 +910,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set @@ -940,6 +967,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -967,6 +995,7 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -990,7 +1019,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -1032,6 +1061,7 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1052,6 +1082,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_DYNAMIC_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1059,9 +1090,7 @@ CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUG_LL=y -# CONFIG_EARLY_PRINTK is not set -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_LL is not set # CONFIG_OC_ETM is not set # diff --git a/arch/arm/configs/spear300_defconfig b/arch/arm/configs/spear300_defconfig new file mode 100644 index 000000000000..35e64d1cb750 --- /dev/null +++ b/arch/arm/configs/spear300_defconfig @@ -0,0 +1,773 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Tue Mar 23 14:36:23 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR3XX=y +# CONFIG_ARCH_SPEAR6XX is not set +CONFIG_MACH_SPEAR300=y +# CONFIG_MACH_SPEAR310 is not set +# CONFIG_MACH_SPEAR320 is not set +CONFIG_BOARD_SPEAR300_EVB=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_PL061=y + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_DETECTOR=y +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/spear310_defconfig b/arch/arm/configs/spear310_defconfig new file mode 100644 index 000000000000..cbbfd290bba8 --- /dev/null +++ b/arch/arm/configs/spear310_defconfig @@ -0,0 +1,775 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Tue Mar 23 14:37:01 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR3XX=y +# CONFIG_ARCH_SPEAR6XX is not set +# CONFIG_MACH_SPEAR300 is not set +CONFIG_MACH_SPEAR310=y +# CONFIG_MACH_SPEAR320 is not set +# CONFIG_BOARD_SPEAR300_EVB is not set +CONFIG_BOARD_SPEAR310_EVB=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_PL061=y + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_DETECTOR=y +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/spear320_defconfig b/arch/arm/configs/spear320_defconfig new file mode 100644 index 000000000000..2ae3c110a21a --- /dev/null +++ b/arch/arm/configs/spear320_defconfig @@ -0,0 +1,775 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Tue Mar 23 14:37:12 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR3XX=y +# CONFIG_ARCH_SPEAR6XX is not set +# CONFIG_MACH_SPEAR300 is not set +# CONFIG_MACH_SPEAR310 is not set +CONFIG_MACH_SPEAR320=y +# CONFIG_BOARD_SPEAR300_EVB is not set +CONFIG_BOARD_SPEAR320_EVB=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_PL061=y + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_DETECTOR=y +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/spear600_defconfig b/arch/arm/configs/spear600_defconfig new file mode 100644 index 000000000000..c85a02924ec5 --- /dev/null +++ b/arch/arm/configs/spear600_defconfig @@ -0,0 +1,760 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Tue Mar 23 14:37:26 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +CONFIG_PLAT_SPEAR=y +# CONFIG_ARCH_SPEAR3XX is not set +CONFIG_ARCH_SPEAR6XX=y +# CONFIG_MACH_SPEAR300 is not set +# CONFIG_MACH_SPEAR310 is not set +# CONFIG_MACH_SPEAR320 is not set +# CONFIG_BOARD_SPEAR300_EVB is not set +CONFIG_MACH_SPEAR600=y +CONFIG_BOARD_SPEAR600_EVB=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_VIC=y +CONFIG_ARM_VIC_NR=2 +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_R3964 is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +CONFIG_GPIO_PL061=y + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_DETECTOR=y +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig new file mode 100644 index 000000000000..06a8293c61ca --- /dev/null +++ b/arch/arm/configs/stamp9g20_defconfig @@ -0,0 +1,1456 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.34-rc1 +# Wed Mar 17 16:38:03 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +# CONFIG_TREE_RCU is not set +CONFIG_TREE_PREEMPT_RCU=y +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set +CONFIG_HAVE_AT91_USART3=y +CONFIG_HAVE_AT91_USART4=y +CONFIG_HAVE_AT91_USART5=y + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9G10 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +CONFIG_ARCH_AT91SAM9G20=y +# CONFIG_ARCH_AT91SAM9G45 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT572D940HF is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9G20 Board Type +# +# CONFIG_MACH_AT91SAM9G20EK is not set +# CONFIG_MACH_AT91SAM9G20EK_2MMC is not set +# CONFIG_MACH_CPU9G20 is not set +CONFIG_MACH_PORTUXG20=y +CONFIG_MACH_STAMP9G20=y + +# +# AT91 Board Options +# + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_SLOW_CLOCK=y +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=999999 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_IT8761E is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +CONFIG_W1_MASTER_GPIO=y + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=y +# CONFIG_W1_SLAVE_SMEM is not set +CONFIG_W1_SLAVE_DS2431=y +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +CONFIG_AT91SAM9X_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=m +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_MASS_STORAGE is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set +# CONFIG_USB_G_MULTI is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ULPI is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +CONFIG_MMC_ATMELMCI=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_RTC_DRV_AT91SAM9_RTT=0 +CONFIG_RTC_DRV_AT91SAM9_GPBR=0 +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h index 04be3bdf46b8..c0f4e7bf22de 100644 --- a/arch/arm/include/asm/hardware/arm_timer.h +++ b/arch/arm/include/asm/hardware/arm_timer.h @@ -1,21 +1,30 @@ #ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H #define __ASM_ARM_HARDWARE_ARM_TIMER_H -#define TIMER_LOAD 0x00 -#define TIMER_VALUE 0x04 -#define TIMER_CTRL 0x08 -#define TIMER_CTRL_ONESHOT (1 << 0) -#define TIMER_CTRL_32BIT (1 << 1) -#define TIMER_CTRL_DIV1 (0 << 2) -#define TIMER_CTRL_DIV16 (1 << 2) -#define TIMER_CTRL_DIV256 (2 << 2) -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable (versatile only) */ -#define TIMER_CTRL_PERIODIC (1 << 6) -#define TIMER_CTRL_ENABLE (1 << 7) +/* + * ARM timer implementation, found in Integrator, Versatile and Realview + * platforms. Not all platforms support all registers and bits in these + * registers, so we mark them with A for Integrator AP, C for Integrator + * CP, V for Versatile and R for Realview. + * + * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview + * can have 16-bit or 32-bit selectable via a bit in the control register. + */ +#define TIMER_LOAD 0x00 /* ACVR rw */ +#define TIMER_VALUE 0x04 /* ACVR ro */ +#define TIMER_CTRL 0x08 /* ACVR rw */ +#define TIMER_CTRL_ONESHOT (1 << 0) /* CVR */ +#define TIMER_CTRL_32BIT (1 << 1) /* CVR */ +#define TIMER_CTRL_DIV1 (0 << 2) /* ACVR */ +#define TIMER_CTRL_DIV16 (1 << 2) /* ACVR */ +#define TIMER_CTRL_DIV256 (2 << 2) /* ACVR */ +#define TIMER_CTRL_IE (1 << 5) /* VR */ +#define TIMER_CTRL_PERIODIC (1 << 6) /* ACVR */ +#define TIMER_CTRL_ENABLE (1 << 7) /* ACVR */ -#define TIMER_INTCLR 0x0c -#define TIMER_RIS 0x10 -#define TIMER_MIS 0x14 -#define TIMER_BGLOAD 0x18 +#define TIMER_INTCLR 0x0c /* ACVR wo */ +#define TIMER_RIS 0x10 /* CVR ro */ +#define TIMER_MIS 0x14 /* CVR ro */ +#define TIMER_BGLOAD 0x18 /* CVR rw */ #endif diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index cdb9022716fd..6bcba48800fe 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -21,6 +21,9 @@ #define __ASM_ARM_HARDWARE_L2X0_H #define L2X0_CACHE_ID 0x000 +#define L2X0_CACHE_ID_PART_MASK (0xf << 6) +#define L2X0_CACHE_ID_PART_L210 (1 << 6) +#define L2X0_CACHE_ID_PART_L310 (3 << 6) #define L2X0_CACHE_TYPE 0x004 #define L2X0_CTRL 0x100 #define L2X0_AUX_CTRL 0x104 diff --git a/arch/arm/include/asm/hardware/icst.h b/arch/arm/include/asm/hardware/icst.h new file mode 100644 index 000000000000..10382a3dcec9 --- /dev/null +++ b/arch/arm/include/asm/hardware/icst.h @@ -0,0 +1,59 @@ +/* + * arch/arm/include/asm/hardware/icst.h + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Support functions for calculating clocks/divisors for the ICST + * clock generators. See http://www.icst.com/ for more information + * on these devices. + */ +#ifndef ASMARM_HARDWARE_ICST_H +#define ASMARM_HARDWARE_ICST_H + +struct icst_params { + unsigned long ref; + unsigned long vco_max; /* inclusive */ + unsigned long vco_min; /* exclusive */ + unsigned short vd_min; /* inclusive */ + unsigned short vd_max; /* inclusive */ + unsigned char rd_min; /* inclusive */ + unsigned char rd_max; /* inclusive */ + const unsigned char *s2div; /* chip specific s2div array */ + const unsigned char *idx2s; /* chip specific idx2s array */ +}; + +struct icst_vco { + unsigned short v; + unsigned char r; + unsigned char s; +}; + +unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco); +struct icst_vco icst_hz_to_vco(const struct icst_params *p, unsigned long freq); + +/* + * ICST307 VCO frequency must be between 6MHz and 200MHz (3.3 or 5V). + * This frequency is pre-output divider. + */ +#define ICST307_VCO_MIN 6000000 +#define ICST307_VCO_MAX 200000000 + +extern const unsigned char icst307_s2div[]; +extern const unsigned char icst307_idx2s[]; + +/* + * ICST525 VCO frequency must be between 10MHz and 200MHz (3V) or 320MHz (5V). + * This frequency is pre-output divider. + */ +#define ICST525_VCO_MIN 10000000 +#define ICST525_VCO_MAX_3V 200000000 +#define ICST525_VCO_MAX_5V 320000000 + +extern const unsigned char icst525_s2div[]; +extern const unsigned char icst525_idx2s[]; + +#endif diff --git a/arch/arm/include/asm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h deleted file mode 100644 index 554f128a1046..000000000000 --- a/arch/arm/include/asm/hardware/icst307.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/arm/include/asm/hardware/icst307.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICS307 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - * - * This file is similar to the icst525.h file - */ -#ifndef ASMARM_HARDWARE_ICST307_H -#define ASMARM_HARDWARE_ICST307_H - -struct icst307_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst307_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco); -struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq); -struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period); - -#endif diff --git a/arch/arm/include/asm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h deleted file mode 100644 index 58f0dc43e2ed..000000000000 --- a/arch/arm/include/asm/hardware/icst525.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/include/asm/hardware/icst525.h - * - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Support functions for calculating clocks/divisors for the ICST525 - * clock generators. See http://www.icst.com/ for more information - * on these devices. - */ -#ifndef ASMARM_HARDWARE_ICST525_H -#define ASMARM_HARDWARE_ICST525_H - -struct icst525_params { - unsigned long ref; - unsigned long vco_max; /* inclusive */ - unsigned short vd_min; /* inclusive */ - unsigned short vd_max; /* inclusive */ - unsigned char rd_min; /* inclusive */ - unsigned char rd_max; /* inclusive */ -}; - -struct icst525_vco { - unsigned short v; - unsigned char r; - unsigned char s; -}; - -unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco); -struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq); -struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period); - -#endif diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h new file mode 100644 index 000000000000..575fa8186ca0 --- /dev/null +++ b/arch/arm/include/asm/hardware/pl330.h @@ -0,0 +1,217 @@ +/* linux/include/asm/hardware/pl330.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __PL330_CORE_H +#define __PL330_CORE_H + +#define PL330_MAX_CHAN 8 +#define PL330_MAX_IRQS 32 +#define PL330_MAX_PERI 32 + +enum pl330_srccachectrl { + SCCTRL0 = 0, /* Noncacheable and nonbufferable */ + SCCTRL1, /* Bufferable only */ + SCCTRL2, /* Cacheable, but do not allocate */ + SCCTRL3, /* Cacheable and bufferable, but do not allocate */ + SINVALID1, + SINVALID2, + SCCTRL6, /* Cacheable write-through, allocate on reads only */ + SCCTRL7, /* Cacheable write-back, allocate on reads only */ +}; + +enum pl330_dstcachectrl { + DCCTRL0 = 0, /* Noncacheable and nonbufferable */ + DCCTRL1, /* Bufferable only */ + DCCTRL2, /* Cacheable, but do not allocate */ + DCCTRL3, /* Cacheable and bufferable, but do not allocate */ + DINVALID1 = 8, + DINVALID2, + DCCTRL6, /* Cacheable write-through, allocate on writes only */ + DCCTRL7, /* Cacheable write-back, allocate on writes only */ +}; + +/* Populated by the PL330 core driver for DMA API driver's info */ +struct pl330_config { + u32 periph_id; + u32 pcell_id; +#define DMAC_MODE_NS (1 << 0) + unsigned int mode; + unsigned int data_bus_width:10; /* In number of bits */ + unsigned int data_buf_dep:10; + unsigned int num_chan:4; + unsigned int num_peri:6; + u32 peri_ns; + unsigned int num_events:6; + u32 irq_ns; +}; + +/* Handle to the DMAC provided to the PL330 core */ +struct pl330_info { + /* Owning device */ + struct device *dev; + /* Size of MicroCode buffers for each channel. */ + unsigned mcbufsz; + /* ioremap'ed address of PL330 registers. */ + void __iomem *base; + /* Client can freely use it. */ + void *client_data; + /* PL330 core data, Client must not touch it. */ + void *pl330_data; + /* Populated by the PL330 core driver during pl330_add */ + struct pl330_config pcfg; + /* + * If the DMAC has some reset mechanism, then the + * client may want to provide pointer to the method. + */ + void (*dmac_reset)(struct pl330_info *pi); +}; + +enum pl330_byteswap { + SWAP_NO = 0, + SWAP_2, + SWAP_4, + SWAP_8, + SWAP_16, +}; + +/** + * Request Configuration. + * The PL330 core does not modify this and uses the last + * working configuration if the request doesn't provide any. + * + * The Client may want to provide this info only for the + * first request and a request with new settings. + */ +struct pl330_reqcfg { + /* Address Incrementing */ + unsigned dst_inc:1; + unsigned src_inc:1; + + /* + * For now, the SRC & DST protection levels + * and burst size/length are assumed same. + */ + bool nonsecure; + bool privileged; + bool insnaccess; + unsigned brst_len:5; + unsigned brst_size:3; /* in power of 2 */ + + enum pl330_dstcachectrl dcctl; + enum pl330_srccachectrl scctl; + enum pl330_byteswap swap; +}; + +/* + * One cycle of DMAC operation. + * There may be more than one xfer in a request. + */ +struct pl330_xfer { + u32 src_addr; + u32 dst_addr; + /* Size to xfer */ + u32 bytes; + /* + * Pointer to next xfer in the list. + * The last xfer in the req must point to NULL. + */ + struct pl330_xfer *next; +}; + +/* The xfer callbacks are made with one of these arguments. */ +enum pl330_op_err { + /* The all xfers in the request were success. */ + PL330_ERR_NONE, + /* If req aborted due to global error. */ + PL330_ERR_ABORT, + /* If req failed due to problem with Channel. */ + PL330_ERR_FAIL, +}; + +enum pl330_reqtype { + MEMTOMEM, + MEMTODEV, + DEVTOMEM, + DEVTODEV, +}; + +/* A request defining Scatter-Gather List ending with NULL xfer. */ +struct pl330_req { + enum pl330_reqtype rqtype; + /* Index of peripheral for the xfer. */ + unsigned peri:5; + /* Unique token for this xfer, set by the client. */ + void *token; + /* Callback to be called after xfer. */ + void (*xfer_cb)(void *token, enum pl330_op_err err); + /* If NULL, req will be done at last set parameters. */ + struct pl330_reqcfg *cfg; + /* Pointer to first xfer in the request. */ + struct pl330_xfer *x; +}; + +/* + * To know the status of the channel and DMAC, the client + * provides a pointer to this structure. The PL330 core + * fills it with current information. + */ +struct pl330_chanstatus { + /* + * If the DMAC engine halted due to some error, + * the client should remove-add DMAC. + */ + bool dmac_halted; + /* + * If channel is halted due to some error, + * the client should ABORT/FLUSH and START the channel. + */ + bool faulting; + /* Location of last load */ + u32 src_addr; + /* Location of last store */ + u32 dst_addr; + /* + * Pointer to the currently active req, NULL if channel is + * inactive, even though the requests may be present. + */ + struct pl330_req *top_req; + /* Pointer to req waiting second in the queue if any. */ + struct pl330_req *wait_req; +}; + +enum pl330_chan_op { + /* Start the channel */ + PL330_OP_START, + /* Abort the active xfer */ + PL330_OP_ABORT, + /* Stop xfer and flush queue */ + PL330_OP_FLUSH, +}; + +extern int pl330_add(struct pl330_info *); +extern void pl330_del(struct pl330_info *pi); +extern int pl330_update(const struct pl330_info *pi); +extern void pl330_release_channel(void *ch_id); +extern void *pl330_request_channel(const struct pl330_info *pi); +extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus); +extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op); +extern int pl330_submit_req(void *ch_id, struct pl330_req *r); + +#endif /* __PL330_CORE_H */ diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h new file mode 100644 index 000000000000..a101f10bb5b1 --- /dev/null +++ b/arch/arm/include/asm/hardware/sp810.h @@ -0,0 +1,59 @@ +/* + * arch/arm/include/asm/hardware/sp810.h + * + * ARM PrimeXsys System Controller SP810 header file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARM_SP810_H +#define __ASM_ARM_SP810_H + +#include <linux/io.h> + +/* sysctl registers offset */ +#define SCCTRL 0x000 +#define SCSYSSTAT 0x004 +#define SCIMCTRL 0x008 +#define SCIMSTAT 0x00C +#define SCXTALCTRL 0x010 +#define SCPLLCTRL 0x014 +#define SCPLLFCTRL 0x018 +#define SCPERCTRL0 0x01C +#define SCPERCTRL1 0x020 +#define SCPEREN 0x024 +#define SCPERDIS 0x028 +#define SCPERCLKEN 0x02C +#define SCPERSTAT 0x030 +#define SCSYSID0 0xEE0 +#define SCSYSID1 0xEE4 +#define SCSYSID2 0xEE8 +#define SCSYSID3 0xEEC +#define SCITCR 0xF00 +#define SCITIR0 0xF04 +#define SCITIR1 0xF08 +#define SCITOR 0xF0C +#define SCCNTCTRL 0xF10 +#define SCCNTDATA 0xF14 +#define SCCNTSTEP 0xF18 +#define SCPERIPHID0 0xFE0 +#define SCPERIPHID1 0xFE4 +#define SCPERIPHID2 0xFE8 +#define SCPERIPHID3 0xFEC +#define SCPCELLID0 0xFF0 +#define SCPCELLID1 0xFF4 +#define SCPCELLID2 0xFF8 +#define SCPCELLID3 0xFFC + +static inline void sysctl_soft_reset(void __iomem *base) +{ + /* writing any value to SCSYSSTAT reg will reset system */ + writel(0, base + SCSYSSTAT); +} + +#endif /* __ASM_ARM_SP810_H */ diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h index a91d8a1523cf..7f0b6d13296a 100644 --- a/arch/arm/include/asm/ioctls.h +++ b/arch/arm/include/asm/ioctls.h @@ -53,6 +53,9 @@ #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCGRS485 0x542E +#define TIOCSRS485 0x542F + #define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ #define FIOCLEX 0x5451 #define FIOASYNC 0x5452 diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index a38bdc7afa34..52f0da1e97df 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -8,10 +8,16 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_MACH_PCI_H +#define __ASM_MACH_PCI_H + struct pci_sys_data; struct pci_bus; struct hw_pci { +#ifdef CONFIG_PCI_DOMAINS + int domain; +#endif struct list_head buses; int nr_controllers; int (*setup)(int nr, struct pci_sys_data *); @@ -26,6 +32,9 @@ struct hw_pci { * Per-controller structure */ struct pci_sys_data { +#ifdef CONFIG_PCI_DOMAINS + int domain; +#endif struct list_head node; int busnr; /* primary bus number */ u64 mem_offset; /* bus->cpu memory mapping offset */ @@ -70,3 +79,5 @@ extern int pci_v3_setup(int nr, struct pci_sys_data *); extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *); extern void pci_v3_preinit(void); extern void pci_v3_postinit(void); + +#endif /* __ASM_MACH_PCI_H */ diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h index 8bffc3ff3acf..35d408f6dccf 100644 --- a/arch/arm/include/asm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -38,7 +38,7 @@ struct sys_timer { void (*init)(void); void (*suspend)(void); void (*resume)(void); -#ifndef CONFIG_GENERIC_TIME +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET unsigned long (*offset)(void); #endif }; diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 47980118d0a5..92e2a833693d 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -4,8 +4,23 @@ #ifdef __KERNEL__ #include <asm-generic/pci-dma-compat.h> +#include <asm/mach/pci.h> /* for pci_sys_data */ #include <mach/hardware.h> /* for PCIBIOS_MIN_* */ +#ifdef CONFIG_PCI_DOMAINS +static inline int pci_domain_nr(struct pci_bus *bus) +{ + struct pci_sys_data *root = bus->sysdata; + + return root->domain; +} + +static inline int pci_proc_domain(struct pci_bus *bus) +{ + return pci_domain_nr(bus); +} +#endif /* CONFIG_PCI_DOMAINS */ + #ifdef CONFIG_PCI_HOST_ITE8152 /* ITE bridge requires setting latency timer to avoid early bus access termination by PIC bus mater devices diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 49e3049aba32..48837e6d8887 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -28,4 +28,21 @@ set_perf_event_pending(void) * same indexes here for consistency. */ #define PERF_EVENT_INDEX_OFFSET 1 +/* ARM perf PMU IDs for use by internal perf clients. */ +enum arm_perf_pmu_ids { + ARM_PERF_PMU_ID_XSCALE1 = 0, + ARM_PERF_PMU_ID_XSCALE2, + ARM_PERF_PMU_ID_V6, + ARM_PERF_PMU_ID_V6MP, + ARM_PERF_PMU_ID_CA8, + ARM_PERF_PMU_ID_CA9, + ARM_NUM_PMU_IDS, +}; + +extern enum arm_perf_pmu_ids +armpmu_get_pmu_id(void); + +extern int +armpmu_get_max_events(void); + #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 11397687f42c..ab68cf1ef80f 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -314,7 +314,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED) #define pgprot_writecombine(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE) -#if __LINUX_ARM_ARCH__ >= 7 +#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE) #else diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 2829b9f981a1..8ccea012722c 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -12,33 +12,33 @@ #ifndef __ARM_PMU_H__ #define __ARM_PMU_H__ -#ifdef CONFIG_CPU_HAS_PMU - -struct pmu_irqs { - const int *irqs; - int num_irqs; +enum arm_pmu_type { + ARM_PMU_DEVICE_CPU = 0, + ARM_NUM_PMU_DEVICES, }; +#ifdef CONFIG_CPU_HAS_PMU + /** * reserve_pmu() - reserve the hardware performance counters * * Reserve the hardware performance counters in the system for exclusive use. - * The 'struct pmu_irqs' for the system is returned on success, ERR_PTR() + * The platform_device for the system is returned on success, ERR_PTR() * encoded error on failure. */ -extern const struct pmu_irqs * -reserve_pmu(void); +extern struct platform_device * +reserve_pmu(enum arm_pmu_type device); /** * release_pmu() - Relinquish control of the performance counters * * Release the performance counters and allow someone else to use them. * Callers must have disabled the counters and released IRQs before calling - * this. The 'struct pmu_irqs' returned from reserve_pmu() must be passed as + * this. The platform_device returned from reserve_pmu() must be passed as * a cookie. */ extern int -release_pmu(const struct pmu_irqs *irqs); +release_pmu(struct platform_device *pdev); /** * init_pmu() - Initialise the PMU. @@ -48,24 +48,26 @@ release_pmu(const struct pmu_irqs *irqs); * the actual hardware initialisation. */ extern int -init_pmu(void); +init_pmu(enum arm_pmu_type device); #else /* CONFIG_CPU_HAS_PMU */ -static inline const struct pmu_irqs * -reserve_pmu(void) +#include <linux/err.h> + +static inline struct platform_device * +reserve_pmu(enum arm_pmu_type device) { return ERR_PTR(-ENODEV); } static inline int -release_pmu(const struct pmu_irqs *irqs) +release_pmu(struct platform_device *pdev) { return -ENODEV; } static inline int -init_pmu(void) +init_pmu(enum arm_pmu_type device) { return -ENODEV; } diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h index ca0a37d03400..bcda59f39941 100644 --- a/arch/arm/include/asm/scatterlist.h +++ b/arch/arm/include/asm/scatterlist.h @@ -4,24 +4,8 @@ #include <asm/memory.h> #include <asm/types.h> -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* buffer offset */ - dma_addr_t dma_address; /* dma address */ - unsigned int length; /* length */ -}; +#include <asm-generic/scatterlist.h> -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#undef ARCH_HAS_SG_CHAIN #endif /* _ASMARM_SCATTERLIST_H */ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index e0d763be1846..3d05190797cb 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -82,7 +82,7 @@ struct secondary_data { extern struct secondary_data secondary_data; extern int __cpu_disable(void); -extern int mach_cpu_disable(unsigned int cpu); +extern int platform_cpu_disable(unsigned int cpu); extern void __cpu_die(unsigned int cpu); extern void cpu_die(void); diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 4ace45ec3ef8..5f4f48002734 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -141,7 +141,7 @@ extern unsigned int user_debug; #ifdef CONFIG_ARCH_HAS_BARRIERS #include <mach/barriers.h> -#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) +#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) #define mb() do { dsb(); outer_sync(); } while (0) #define rmb() dmb() #define wmb() mb() diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index bd397e0b663e..c6273a3bfc25 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -527,6 +527,9 @@ static void __init pcibios_init_hw(struct hw_pci *hw) if (!sys) panic("PCI: unable to allocate sys data!"); +#ifdef CONFIG_PCI_DOMAINS + sys->domain = hw->domain; +#endif sys->hw = hw; sys->busnr = busnr; sys->swizzle = hw->swizzle; diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index 7d5b9fb01e71..2c4a185f92cd 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -16,6 +16,8 @@ #include <linux/spinlock.h> #include <linux/errno.h> #include <linux/scatterlist.h> +#include <linux/seq_file.h> +#include <linux/proc_fs.h> #include <asm/dma.h> @@ -264,3 +266,37 @@ int get_dma_residue(unsigned int chan) return ret; } EXPORT_SYMBOL(get_dma_residue); + +#ifdef CONFIG_PROC_FS +static int proc_dma_show(struct seq_file *m, void *v) +{ + int i; + + for (i = 0 ; i < MAX_DMA_CHANNELS ; i++) { + dma_t *dma = dma_channel(i); + if (dma && dma->lock) + seq_printf(m, "%2d: %s\n", i, dma->device_id); + } + return 0; +} + +static int proc_dma_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_dma_show, NULL); +} + +static const struct file_operations proc_dma_operations = { + .open = proc_dma_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init proc_dma_init(void) +{ + proc_create("dma", 0, NULL, &proc_dma_operations); + return 0; +} + +__initcall(proc_dma_init); +#endif diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 9e70f2053f9a..c45768614c8a 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -16,7 +16,9 @@ #include <linux/interrupt.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/perf_event.h> +#include <linux/platform_device.h> #include <linux/spinlock.h> #include <linux/uaccess.h> @@ -26,7 +28,7 @@ #include <asm/pmu.h> #include <asm/stacktrace.h> -static const struct pmu_irqs *pmu_irqs; +static struct platform_device *pmu_device; /* * Hardware lock to serialize accesses to PMU registers. Needed for the @@ -67,8 +69,18 @@ struct cpu_hw_events { }; DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); +/* PMU names. */ +static const char *arm_pmu_names[] = { + [ARM_PERF_PMU_ID_XSCALE1] = "xscale1", + [ARM_PERF_PMU_ID_XSCALE2] = "xscale2", + [ARM_PERF_PMU_ID_V6] = "v6", + [ARM_PERF_PMU_ID_V6MP] = "v6mpcore", + [ARM_PERF_PMU_ID_CA8] = "ARMv7 Cortex-A8", + [ARM_PERF_PMU_ID_CA9] = "ARMv7 Cortex-A9", +}; + struct arm_pmu { - char *name; + enum arm_perf_pmu_ids id; irqreturn_t (*handle_irq)(int irq_num, void *dev); void (*enable)(struct hw_perf_event *evt, int idx); void (*disable)(struct hw_perf_event *evt, int idx); @@ -87,6 +99,30 @@ struct arm_pmu { /* Set at runtime when we know what CPU type we are. */ static const struct arm_pmu *armpmu; +enum arm_perf_pmu_ids +armpmu_get_pmu_id(void) +{ + int id = -ENODEV; + + if (armpmu != NULL) + id = armpmu->id; + + return id; +} +EXPORT_SYMBOL_GPL(armpmu_get_pmu_id); + +int +armpmu_get_max_events(void) +{ + int max_events = 0; + + if (armpmu != NULL) + max_events = armpmu->num_events; + + return max_events; +} +EXPORT_SYMBOL_GPL(armpmu_get_max_events); + #define HW_OP_UNSUPPORTED 0xFFFF #define C(_x) \ @@ -314,38 +350,44 @@ validate_group(struct perf_event *event) static int armpmu_reserve_hardware(void) { - int i; - int err; + int i, err = -ENODEV, irq; - pmu_irqs = reserve_pmu(); - if (IS_ERR(pmu_irqs)) { + pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU); + if (IS_ERR(pmu_device)) { pr_warning("unable to reserve pmu\n"); - return PTR_ERR(pmu_irqs); + return PTR_ERR(pmu_device); } - init_pmu(); + init_pmu(ARM_PMU_DEVICE_CPU); - if (pmu_irqs->num_irqs < 1) { + if (pmu_device->num_resources < 1) { pr_err("no irqs for PMUs defined\n"); return -ENODEV; } - for (i = 0; i < pmu_irqs->num_irqs; ++i) { - err = request_irq(pmu_irqs->irqs[i], armpmu->handle_irq, + for (i = 0; i < pmu_device->num_resources; ++i) { + irq = platform_get_irq(pmu_device, i); + if (irq < 0) + continue; + + err = request_irq(irq, armpmu->handle_irq, IRQF_DISABLED | IRQF_NOBALANCING, "armpmu", NULL); if (err) { - pr_warning("unable to request IRQ%d for ARM " - "perf counters\n", pmu_irqs->irqs[i]); + pr_warning("unable to request IRQ%d for ARM perf " + "counters\n", irq); break; } } if (err) { - for (i = i - 1; i >= 0; --i) - free_irq(pmu_irqs->irqs[i], NULL); - release_pmu(pmu_irqs); - pmu_irqs = NULL; + for (i = i - 1; i >= 0; --i) { + irq = platform_get_irq(pmu_device, i); + if (irq >= 0) + free_irq(irq, NULL); + } + release_pmu(pmu_device); + pmu_device = NULL; } return err; @@ -354,14 +396,17 @@ armpmu_reserve_hardware(void) static void armpmu_release_hardware(void) { - int i; + int i, irq; - for (i = pmu_irqs->num_irqs - 1; i >= 0; --i) - free_irq(pmu_irqs->irqs[i], NULL); + for (i = pmu_device->num_resources - 1; i >= 0; --i) { + irq = platform_get_irq(pmu_device, i); + if (irq >= 0) + free_irq(irq, NULL); + } armpmu->stop(); - release_pmu(pmu_irqs); - pmu_irqs = NULL; + release_pmu(pmu_device); + pmu_device = NULL; } static atomic_t active_events = ATOMIC_INIT(0); @@ -1144,7 +1189,7 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, } static const struct arm_pmu armv6pmu = { - .name = "v6", + .id = ARM_PERF_PMU_ID_V6, .handle_irq = armv6pmu_handle_irq, .enable = armv6pmu_enable_event, .disable = armv6pmu_disable_event, @@ -1167,7 +1212,7 @@ static const struct arm_pmu armv6pmu = { * reset the period and enable the interrupt reporting. */ static const struct arm_pmu armv6mpcore_pmu = { - .name = "v6mpcore", + .id = ARM_PERF_PMU_ID_V6MP, .handle_irq = armv6pmu_handle_irq, .enable = armv6pmu_enable_event, .disable = armv6mpcore_pmu_disable_event, @@ -1197,10 +1242,6 @@ static const struct arm_pmu armv6mpcore_pmu = { * counter and all 4 performance counters together can be reset separately. */ -#define ARMV7_PMU_CORTEX_A8_NAME "ARMv7 Cortex-A8" - -#define ARMV7_PMU_CORTEX_A9_NAME "ARMv7 Cortex-A9" - /* Common ARMv7 event types */ enum armv7_perf_types { ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, @@ -2079,6 +2120,803 @@ static u32 __init armv7_reset_read_pmnc(void) return nb_cnt + 1; } +/* + * ARMv5 [xscale] Performance counter handling code. + * + * Based on xscale OProfile code. + * + * There are two variants of the xscale PMU that we support: + * - xscale1pmu: 2 event counters and a cycle counter + * - xscale2pmu: 4 event counters and a cycle counter + * The two variants share event definitions, but have different + * PMU structures. + */ + +enum xscale_perf_types { + XSCALE_PERFCTR_ICACHE_MISS = 0x00, + XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01, + XSCALE_PERFCTR_DATA_STALL = 0x02, + XSCALE_PERFCTR_ITLB_MISS = 0x03, + XSCALE_PERFCTR_DTLB_MISS = 0x04, + XSCALE_PERFCTR_BRANCH = 0x05, + XSCALE_PERFCTR_BRANCH_MISS = 0x06, + XSCALE_PERFCTR_INSTRUCTION = 0x07, + XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08, + XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09, + XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A, + XSCALE_PERFCTR_DCACHE_MISS = 0x0B, + XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C, + XSCALE_PERFCTR_PC_CHANGED = 0x0D, + XSCALE_PERFCTR_BCU_REQUEST = 0x10, + XSCALE_PERFCTR_BCU_FULL = 0x11, + XSCALE_PERFCTR_BCU_DRAIN = 0x12, + XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14, + XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15, + XSCALE_PERFCTR_RMW = 0x16, + /* XSCALE_PERFCTR_CCNT is not hardware defined */ + XSCALE_PERFCTR_CCNT = 0xFE, + XSCALE_PERFCTR_UNUSED = 0xFF, +}; + +enum xscale_counters { + XSCALE_CYCLE_COUNTER = 1, + XSCALE_COUNTER0, + XSCALE_COUNTER1, + XSCALE_COUNTER2, + XSCALE_COUNTER3, +}; + +static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, + [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, + [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, +}; + +static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +#define XSCALE_PMU_ENABLE 0x001 +#define XSCALE_PMN_RESET 0x002 +#define XSCALE_CCNT_RESET 0x004 +#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET) +#define XSCALE_PMU_CNT64 0x008 + +static inline int +xscalepmu_event_map(int config) +{ + int mapping = xscale_perf_map[config]; + if (HW_OP_UNSUPPORTED == mapping) + mapping = -EOPNOTSUPP; + return mapping; +} + +static u64 +xscalepmu_raw_event(u64 config) +{ + return config & 0xff; +} + +#define XSCALE1_OVERFLOWED_MASK 0x700 +#define XSCALE1_CCOUNT_OVERFLOW 0x400 +#define XSCALE1_COUNT0_OVERFLOW 0x100 +#define XSCALE1_COUNT1_OVERFLOW 0x200 +#define XSCALE1_CCOUNT_INT_EN 0x040 +#define XSCALE1_COUNT0_INT_EN 0x010 +#define XSCALE1_COUNT1_INT_EN 0x020 +#define XSCALE1_COUNT0_EVT_SHFT 12 +#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT) +#define XSCALE1_COUNT1_EVT_SHFT 20 +#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT) + +static inline u32 +xscale1pmu_read_pmnc(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val)); + return val; +} + +static inline void +xscale1pmu_write_pmnc(u32 val) +{ + /* upper 4bits and 7, 11 are write-as-0 */ + val &= 0xffff77f; + asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val)); +} + +static inline int +xscale1_pmnc_counter_has_overflowed(unsigned long pmnc, + enum xscale_counters counter) +{ + int ret = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + ret = pmnc & XSCALE1_CCOUNT_OVERFLOW; + break; + case XSCALE_COUNTER0: + ret = pmnc & XSCALE1_COUNT0_OVERFLOW; + break; + case XSCALE_COUNTER1: + ret = pmnc & XSCALE1_COUNT1_OVERFLOW; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + } + + return ret; +} + +static irqreturn_t +xscale1pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long pmnc; + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + /* + * NOTE: there's an A stepping erratum that states if an overflow + * bit already exists and another occurs, the previous + * Overflow bit gets cleared. There's no workaround. + * Fixed in B stepping or later. + */ + pmnc = xscale1pmu_read_pmnc(); + + /* + * Write the value back to clear the overflow flags. Overflow + * flags remain in pmnc for use below. We also disable the PMU + * while we process the interrupt. + */ + xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); + + if (!(pmnc & XSCALE1_OVERFLOWED_MASK)) + return IRQ_NONE; + + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + perf_event_do_pending(); + + /* + * Re-enable the PMU. + */ + pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(pmnc); + + return IRQ_HANDLED; +} + +static void +xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long val, mask, evt, flags; + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + mask = 0; + evt = XSCALE1_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + mask = XSCALE1_COUNT0_EVT_MASK; + evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) | + XSCALE1_COUNT0_INT_EN; + break; + case XSCALE_COUNTER1: + mask = XSCALE1_COUNT1_EVT_MASK; + evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) | + XSCALE1_COUNT1_INT_EN; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~mask; + val |= evt; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long val, mask, evt, flags; + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + mask = XSCALE1_CCOUNT_INT_EN; + evt = 0; + break; + case XSCALE_COUNTER0: + mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK; + evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK; + evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~mask; + val |= evt; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int +xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + if (XSCALE_PERFCTR_CCNT == event->config_base) { + if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) + return -EAGAIN; + + return XSCALE_CYCLE_COUNTER; + } else { + if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) { + return XSCALE_COUNTER1; + } + + if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) { + return XSCALE_COUNTER0; + } + + return -EAGAIN; + } +} + +static void +xscale1pmu_start(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val |= XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale1pmu_stop(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static inline u32 +xscale1pmu_read_counter(int counter) +{ + u32 val = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val)); + break; + } + + return val; +} + +static inline void +xscale1pmu_write_counter(int counter, u32 val) +{ + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val)); + break; + } +} + +static const struct arm_pmu xscale1pmu = { + .id = ARM_PERF_PMU_ID_XSCALE1, + .handle_irq = xscale1pmu_handle_irq, + .enable = xscale1pmu_enable_event, + .disable = xscale1pmu_disable_event, + .event_map = xscalepmu_event_map, + .raw_event = xscalepmu_raw_event, + .read_counter = xscale1pmu_read_counter, + .write_counter = xscale1pmu_write_counter, + .get_event_idx = xscale1pmu_get_event_idx, + .start = xscale1pmu_start, + .stop = xscale1pmu_stop, + .num_events = 3, + .max_period = (1LLU << 32) - 1, +}; + +#define XSCALE2_OVERFLOWED_MASK 0x01f +#define XSCALE2_CCOUNT_OVERFLOW 0x001 +#define XSCALE2_COUNT0_OVERFLOW 0x002 +#define XSCALE2_COUNT1_OVERFLOW 0x004 +#define XSCALE2_COUNT2_OVERFLOW 0x008 +#define XSCALE2_COUNT3_OVERFLOW 0x010 +#define XSCALE2_CCOUNT_INT_EN 0x001 +#define XSCALE2_COUNT0_INT_EN 0x002 +#define XSCALE2_COUNT1_INT_EN 0x004 +#define XSCALE2_COUNT2_INT_EN 0x008 +#define XSCALE2_COUNT3_INT_EN 0x010 +#define XSCALE2_COUNT0_EVT_SHFT 0 +#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT) +#define XSCALE2_COUNT1_EVT_SHFT 8 +#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT) +#define XSCALE2_COUNT2_EVT_SHFT 16 +#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT) +#define XSCALE2_COUNT3_EVT_SHFT 24 +#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT) + +static inline u32 +xscale2pmu_read_pmnc(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val)); + /* bits 1-2 and 4-23 are read-unpredictable */ + return val & 0xff000009; +} + +static inline void +xscale2pmu_write_pmnc(u32 val) +{ + /* bits 4-23 are write-as-0, 24-31 are write ignored */ + val &= 0xf; + asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val)); +} + +static inline u32 +xscale2pmu_read_overflow_flags(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val)); + return val; +} + +static inline void +xscale2pmu_write_overflow_flags(u32 val) +{ + asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val)); +} + +static inline u32 +xscale2pmu_read_event_select(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val)); + return val; +} + +static inline void +xscale2pmu_write_event_select(u32 val) +{ + asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val)); +} + +static inline u32 +xscale2pmu_read_int_enable(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val)); + return val; +} + +static void +xscale2pmu_write_int_enable(u32 val) +{ + asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val)); +} + +static inline int +xscale2_pmnc_counter_has_overflowed(unsigned long of_flags, + enum xscale_counters counter) +{ + int ret = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + ret = of_flags & XSCALE2_CCOUNT_OVERFLOW; + break; + case XSCALE_COUNTER0: + ret = of_flags & XSCALE2_COUNT0_OVERFLOW; + break; + case XSCALE_COUNTER1: + ret = of_flags & XSCALE2_COUNT1_OVERFLOW; + break; + case XSCALE_COUNTER2: + ret = of_flags & XSCALE2_COUNT2_OVERFLOW; + break; + case XSCALE_COUNTER3: + ret = of_flags & XSCALE2_COUNT3_OVERFLOW; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + } + + return ret; +} + +static irqreturn_t +xscale2pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long pmnc, of_flags; + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + /* Disable the PMU. */ + pmnc = xscale2pmu_read_pmnc(); + xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); + + /* Check the overflow flag register. */ + of_flags = xscale2pmu_read_overflow_flags(); + if (!(of_flags & XSCALE2_OVERFLOWED_MASK)) + return IRQ_NONE; + + /* Clear the overflow bits. */ + xscale2pmu_write_overflow_flags(of_flags); + + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + perf_event_do_pending(); + + /* + * Re-enable the PMU. + */ + pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(pmnc); + + return IRQ_HANDLED; +} + +static void +xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags, ien, evtsel; + + ien = xscale2pmu_read_int_enable(); + evtsel = xscale2pmu_read_event_select(); + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + ien |= XSCALE2_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + ien |= XSCALE2_COUNT0_INT_EN; + evtsel &= ~XSCALE2_COUNT0_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + ien |= XSCALE2_COUNT1_INT_EN; + evtsel &= ~XSCALE2_COUNT1_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT; + break; + case XSCALE_COUNTER2: + ien |= XSCALE2_COUNT2_INT_EN; + evtsel &= ~XSCALE2_COUNT2_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT; + break; + case XSCALE_COUNTER3: + ien |= XSCALE2_COUNT3_INT_EN; + evtsel &= ~XSCALE2_COUNT3_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + xscale2pmu_write_event_select(evtsel); + xscale2pmu_write_int_enable(ien); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags, ien, evtsel; + + ien = xscale2pmu_read_int_enable(); + evtsel = xscale2pmu_read_event_select(); + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + ien &= ~XSCALE2_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + ien &= ~XSCALE2_COUNT0_INT_EN; + evtsel &= ~XSCALE2_COUNT0_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + ien &= ~XSCALE2_COUNT1_INT_EN; + evtsel &= ~XSCALE2_COUNT1_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; + break; + case XSCALE_COUNTER2: + ien &= ~XSCALE2_COUNT2_INT_EN; + evtsel &= ~XSCALE2_COUNT2_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; + break; + case XSCALE_COUNTER3: + ien &= ~XSCALE2_COUNT3_INT_EN; + evtsel &= ~XSCALE2_COUNT3_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + xscale2pmu_write_event_select(evtsel); + xscale2pmu_write_int_enable(ien); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int +xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + int idx = xscale1pmu_get_event_idx(cpuc, event); + if (idx >= 0) + goto out; + + if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask)) + idx = XSCALE_COUNTER3; + else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask)) + idx = XSCALE_COUNTER2; +out: + return idx; +} + +static void +xscale2pmu_start(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; + val |= XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale2pmu_stop(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale2pmu_read_pmnc(); + val &= ~XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static inline u32 +xscale2pmu_read_counter(int counter) +{ + u32 val = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER2: + asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER3: + asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val)); + break; + } + + return val; +} + +static inline void +xscale2pmu_write_counter(int counter, u32 val) +{ + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER2: + asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER3: + asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val)); + break; + } +} + +static const struct arm_pmu xscale2pmu = { + .id = ARM_PERF_PMU_ID_XSCALE2, + .handle_irq = xscale2pmu_handle_irq, + .enable = xscale2pmu_enable_event, + .disable = xscale2pmu_disable_event, + .event_map = xscalepmu_event_map, + .raw_event = xscalepmu_raw_event, + .read_counter = xscale2pmu_read_counter, + .write_counter = xscale2pmu_write_counter, + .get_event_idx = xscale2pmu_get_event_idx, + .start = xscale2pmu_start, + .stop = xscale2pmu_stop, + .num_events = 5, + .max_period = (1LLU << 32) - 1, +}; + static int __init init_hw_perf_events(void) { @@ -2086,7 +2924,7 @@ init_hw_perf_events(void) unsigned long implementor = (cpuid & 0xFF000000) >> 24; unsigned long part_number = (cpuid & 0xFFF0); - /* We only support ARM CPUs implemented by ARM at the moment. */ + /* ARM Ltd CPUs. */ if (0x41 == implementor) { switch (part_number) { case 0xB360: /* ARM1136 */ @@ -2105,7 +2943,7 @@ init_hw_perf_events(void) perf_max_events = armv6mpcore_pmu.num_events; break; case 0xC080: /* Cortex-A8 */ - armv7pmu.name = ARMV7_PMU_CORTEX_A8_NAME; + armv7pmu.id = ARM_PERF_PMU_ID_CA8; memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map, sizeof(armv7_a8_perf_cache_map)); armv7pmu.event_map = armv7_a8_pmu_event_map; @@ -2117,7 +2955,7 @@ init_hw_perf_events(void) perf_max_events = armv7pmu.num_events; break; case 0xC090: /* Cortex-A9 */ - armv7pmu.name = ARMV7_PMU_CORTEX_A9_NAME; + armv7pmu.id = ARM_PERF_PMU_ID_CA9; memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map, sizeof(armv7_a9_perf_cache_map)); armv7pmu.event_map = armv7_a9_pmu_event_map; @@ -2128,15 +2966,33 @@ init_hw_perf_events(void) armv7pmu.num_events = armv7_reset_read_pmnc(); perf_max_events = armv7pmu.num_events; break; - default: - pr_info("no hardware support available\n"); - perf_max_events = -1; + } + /* Intel CPUs [xscale]. */ + } else if (0x69 == implementor) { + part_number = (cpuid >> 13) & 0x7; + switch (part_number) { + case 1: + armpmu = &xscale1pmu; + memcpy(armpmu_perf_cache_map, xscale_perf_cache_map, + sizeof(xscale_perf_cache_map)); + perf_max_events = xscale1pmu.num_events; + break; + case 2: + armpmu = &xscale2pmu; + memcpy(armpmu_perf_cache_map, xscale_perf_cache_map, + sizeof(xscale_perf_cache_map)); + perf_max_events = xscale2pmu.num_events; + break; } } - if (armpmu) + if (armpmu) { pr_info("enabled with %s PMU driver, %d counters available\n", - armpmu->name, armpmu->num_events); + arm_pmu_names[armpmu->id], armpmu->num_events); + } else { + pr_info("no hardware support available\n"); + perf_max_events = -1; + } return 0; } diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index a124312e343f..b8af96ea62e6 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -2,6 +2,7 @@ * linux/arch/arm/kernel/pmu.c * * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles + * Copyright (C) 2010 ARM Ltd, Will Deacon * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -9,65 +10,78 @@ * */ +#define pr_fmt(fmt) "PMU: " fmt + #include <linux/cpumask.h> #include <linux/err.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/platform_device.h> #include <asm/pmu.h> -/* - * Define the IRQs for the system. We could use something like a platform - * device but that seems fairly heavyweight for this. Also, the performance - * counters can't be removed or hotplugged. - * - * Ordering is important: init_pmu() will use the ordering to set the affinity - * to the corresponding core. e.g. the first interrupt will go to cpu 0, the - * second goes to cpu 1 etc. - */ -static const int irqs[] = { -#if defined(CONFIG_ARCH_OMAP2) - 3, -#elif defined(CONFIG_ARCH_BCMRING) - IRQ_PMUIRQ, -#elif defined(CONFIG_MACH_REALVIEW_EB) - IRQ_EB11MP_PMU_CPU0, - IRQ_EB11MP_PMU_CPU1, - IRQ_EB11MP_PMU_CPU2, - IRQ_EB11MP_PMU_CPU3, -#elif defined(CONFIG_ARCH_OMAP3) - INT_34XX_BENCH_MPU_EMUL, -#elif defined(CONFIG_ARCH_IOP32X) - IRQ_IOP32X_CORE_PMU, -#elif defined(CONFIG_ARCH_IOP33X) - IRQ_IOP33X_CORE_PMU, -#elif defined(CONFIG_ARCH_PXA) - IRQ_PMU, -#endif -}; +static volatile long pmu_lock; + +static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES]; + +static int __devinit pmu_device_probe(struct platform_device *pdev) +{ + + if (pdev->id < 0 || pdev->id >= ARM_NUM_PMU_DEVICES) { + pr_warning("received registration request for unknown " + "device %d\n", pdev->id); + return -EINVAL; + } + + if (pmu_devices[pdev->id]) + pr_warning("registering new PMU device type %d overwrites " + "previous registration!\n", pdev->id); + else + pr_info("registered new PMU device of type %d\n", + pdev->id); -static const struct pmu_irqs pmu_irqs = { - .irqs = irqs, - .num_irqs = ARRAY_SIZE(irqs), + pmu_devices[pdev->id] = pdev; + return 0; +} + +static struct platform_driver pmu_driver = { + .driver = { + .name = "arm-pmu", + }, + .probe = pmu_device_probe, }; -static volatile long pmu_lock; +static int __init register_pmu_driver(void) +{ + return platform_driver_register(&pmu_driver); +} +device_initcall(register_pmu_driver); -const struct pmu_irqs * -reserve_pmu(void) +struct platform_device * +reserve_pmu(enum arm_pmu_type device) { - return test_and_set_bit_lock(0, &pmu_lock) ? ERR_PTR(-EBUSY) : - &pmu_irqs; + struct platform_device *pdev; + + if (test_and_set_bit_lock(device, &pmu_lock)) { + pdev = ERR_PTR(-EBUSY); + } else if (pmu_devices[device] == NULL) { + clear_bit_unlock(device, &pmu_lock); + pdev = ERR_PTR(-ENODEV); + } else { + pdev = pmu_devices[device]; + } + + return pdev; } EXPORT_SYMBOL_GPL(reserve_pmu); int -release_pmu(const struct pmu_irqs *irqs) +release_pmu(struct platform_device *pdev) { - if (WARN_ON(irqs != &pmu_irqs)) + if (WARN_ON(pdev != pmu_devices[pdev->id])) return -EINVAL; - clear_bit_unlock(0, &pmu_lock); + clear_bit_unlock(pdev->id, &pmu_lock); return 0; } EXPORT_SYMBOL_GPL(release_pmu); @@ -87,17 +101,42 @@ set_irq_affinity(int irq, #endif } -int -init_pmu(void) +static int +init_cpu_pmu(void) { int i, err = 0; + struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU]; + + if (!pdev) { + err = -ENODEV; + goto out; + } - for (i = 0; i < pmu_irqs.num_irqs; ++i) { - err = set_irq_affinity(pmu_irqs.irqs[i], i); + for (i = 0; i < pdev->num_resources; ++i) { + err = set_irq_affinity(platform_get_irq(pdev, i), i); if (err) break; } +out: + return err; +} + +int +init_pmu(enum arm_pmu_type device) +{ + int err = 0; + + switch (device) { + case ARM_PMU_DEVICE_CPU: + err = init_cpu_pmu(); + break; + default: + pr_warning("attempt to initialise unknown device %d\n", + device); + err = -EINVAL; + } + return err; } EXPORT_SYMBOL_GPL(init_pmu); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index a01194e583ff..b8c3d0f689d9 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -168,7 +168,7 @@ int __cpu_disable(void) struct task_struct *p; int ret; - ret = mach_cpu_disable(cpu); + ret = platform_cpu_disable(cpu); if (ret) return ret; diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 28753805d2d1..38c261f9951c 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -72,12 +72,15 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); #endif -#ifndef CONFIG_GENERIC_TIME -static unsigned long dummy_gettimeoffset(void) +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET +u32 arch_gettimeoffset(void) { + if (system_timer->offset != NULL) + return system_timer->offset() * 1000; + return 0; } -#endif +#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */ #ifdef CONFIG_LEDS_TIMER static inline void do_leds(void) @@ -93,63 +96,6 @@ static inline void do_leds(void) #define do_leds() #endif -#ifndef CONFIG_GENERIC_TIME -void do_gettimeofday(struct timeval *tv) -{ - unsigned long flags; - unsigned long seq; - unsigned long usec, sec; - - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - usec = system_timer->offset(); - sec = xtime.tv_sec; - usec += xtime.tv_nsec / 1000; - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - - /* usec may have gone up a lot: be safe */ - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - /* - * This is revolting. We need to set "xtime" correctly. However, the - * value in this location is the value at the most recent update of - * wall time. Discover what correction gettimeofday() would have - * done, and then undo it! - */ - nsec -= system_timer->offset() * NSEC_PER_USEC; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); -#endif /* !CONFIG_GENERIC_TIME */ #ifndef CONFIG_GENERIC_CLOCKEVENTS /* @@ -214,10 +160,6 @@ device_initcall(timer_init_sysfs); void __init time_init(void) { -#ifndef CONFIG_GENERIC_TIME - if (system_timer->offset == NULL) - system_timer->offset = dummy_gettimeoffset; -#endif system_timer->init(); } diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2db43a5ddd9b..841eaf8f27e2 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -23,14 +23,12 @@ choice config ARCH_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T - select GENERIC_TIME select GENERIC_CLOCKEVENTS select HAVE_AT91_USART3 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE" select CPU_ARM926T - select GENERIC_TIME select GENERIC_CLOCKEVENTS select HAVE_AT91_USART3 select HAVE_AT91_USART4 @@ -39,28 +37,24 @@ config ARCH_AT91SAM9260 config ARCH_AT91SAM9261 bool "AT91SAM9261" select CPU_ARM926T - select GENERIC_TIME select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL config ARCH_AT91SAM9G10 bool "AT91SAM9G10" select CPU_ARM926T - select GENERIC_TIME select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL config ARCH_AT91SAM9263 bool "AT91SAM9263" select CPU_ARM926T - select GENERIC_TIME select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL config ARCH_AT91SAM9RL bool "AT91SAM9RL" select CPU_ARM926T - select GENERIC_TIME select GENERIC_CLOCKEVENTS select HAVE_AT91_USART3 select HAVE_FB_ATMEL @@ -68,7 +62,6 @@ config ARCH_AT91SAM9RL config ARCH_AT91SAM9G20 bool "AT91SAM9G20" select CPU_ARM926T - select GENERIC_TIME select GENERIC_CLOCKEVENTS select HAVE_AT91_USART3 select HAVE_AT91_USART4 @@ -77,7 +70,6 @@ config ARCH_AT91SAM9G20 config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select CPU_ARM926T - select GENERIC_TIME select GENERIC_CLOCKEVENTS select HAVE_AT91_USART3 select HAVE_FB_ATMEL @@ -85,18 +77,17 @@ config ARCH_AT91SAM9G45 config ARCH_AT91CAP9 bool "AT91CAP9" select CPU_ARM926T - select GENERIC_TIME select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL config ARCH_AT572D940HF bool "AT572D940HF" select CPU_ARM926T - select GENERIC_TIME select GENERIC_CLOCKEVENTS config ARCH_AT91X40 bool "AT91x40" + select ARCH_USES_GETTIMEOFFSET endchoice @@ -360,6 +351,19 @@ config MACH_CPU9G20 Select this if you are using a Eukrea Electromatique's CPU9G20 Board <http://www.eukrea.com/> +config MACH_PORTUXG20 + bool "taskit PortuxG20" + help + Select this if you are using taskit's PortuxG20. + <http://www.taskit.de/en/> + +config MACH_STAMP9G20 + bool "taskit Stamp9G20 CPU module" + help + Select this if you are using taskit's Stamp9G20 CPU module on its + evaluation board. + <http://www.taskit.de/en/> + endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index d4004557532a..c1f821e58222 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -63,6 +63,8 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o +obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o +obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o # AT91SAM9G45 board-specific support obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c new file mode 100644 index 000000000000..87958274290f --- /dev/null +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -0,0 +1,315 @@ +/* + * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de> + * taskit GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/mm.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/w1-gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/board.h> +#include <mach/at91sam9_smc.h> + +#include "sam9_smc.h" +#include "generic.h" + + +static void __init portuxg20_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR + | ATMEL_UART_DCD | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART4 on ttyS5. (Rx, Tx only) */ + at91_register_uart(AT91SAM9260_ID_US4, 5, 0); + + /* USART5 on ttyS6. (Rx, Tx only) */ + at91_register_uart(AT91SAM9260_ID_US5, 6, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init stamp9g20_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR + | ATMEL_UART_DCD | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + + +/* + * NAND flash + */ +static struct atmel_nand_data __initdata nand_data = { + .ale = 21, + .cle = 22, + .rdy_pin = AT91_PIN_PC13, + .enable_pin = AT91_PIN_PC14, + .bus_width_16 = 0, +}; + +static struct sam9_smc_config __initdata nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 2, + .ncs_write_setup = 0, + .nwe_setup = 2, + + .ncs_read_pulse = 4, + .nrd_pulse = 4, + .ncs_write_pulse = 4, + .nwe_pulse = 4, + + .read_cycle = 7, + .write_cycle = 7, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, + .tdf_cycles = 3, +}; + +static void __init add_device_nand(void) +{ + /* configure chip-select 3 (NAND) */ + sam9_smc_configure(3, &nand_smc_config); + + at91_add_device_nand(&nand_data); +} + + +/* + * MCI (SD/MMC) + * det_pin, wp_pin and vcc_pin are not connected + */ +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) +static struct mci_platform_data __initdata mmc_data = { + .slot[0] = { + .bus_width = 4, + }, +}; +#else +static struct at91_mmc_data __initdata mmc_data = { + .slot_b = 0, + .wire4 = 1, +}; +#endif + + +/* + * USB Host port + */ +static struct at91_usbh_data __initdata usbh_data = { + .ports = 2, +}; + + +/* + * USB Device port + */ +static struct at91_udc_data __initdata portuxg20_udc_data = { + .vbus_pin = AT91_PIN_PC7, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + +static struct at91_udc_data __initdata stamp9g20_udc_data = { + .vbus_pin = AT91_PIN_PA22, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + + +/* + * MACB Ethernet device + */ +static struct at91_eth_data __initdata macb_data = { + .phy_irq_pin = AT91_PIN_PA28, + .is_rmii = 1, +}; + + +/* + * LEDs + */ +static struct gpio_led portuxg20_leds[] = { + { + .name = "LED2", + .gpio = AT91_PIN_PC5, + .default_trigger = "none", + }, { + .name = "LED3", + .gpio = AT91_PIN_PC4, + .default_trigger = "none", + }, { + .name = "LED4", + .gpio = AT91_PIN_PC10, + .default_trigger = "heartbeat", + } +}; + +static struct gpio_led stamp9g20_leds[] = { + { + .name = "D8", + .gpio = AT91_PIN_PB18, + .active_low = 1, + .default_trigger = "none", + }, { + .name = "D9", + .gpio = AT91_PIN_PB19, + .active_low = 1, + .default_trigger = "none", + }, { + .name = "D10", + .gpio = AT91_PIN_PB20, + .active_low = 1, + .default_trigger = "heartbeat", + } +}; + + +/* + * SPI devices + */ +static struct spi_board_info portuxg20_spi_devices[] = { + { + .modalias = "spidev", + .chip_select = 0, + .max_speed_hz = 1 * 1000 * 1000, + .bus_num = 0, + }, { + .modalias = "spidev", + .chip_select = 0, + .max_speed_hz = 1 * 1000 * 1000, + .bus_num = 1, + }, +}; + + +/* + * Dallas 1-Wire + */ +static struct w1_gpio_platform_data w1_gpio_pdata = { + .pin = AT91_PIN_PA29, + .is_open_drain = 1, +}; + +static struct platform_device w1_device = { + .name = "w1-gpio", + .id = -1, + .dev.platform_data = &w1_gpio_pdata, +}; + +void add_w1(void) +{ + at91_set_GPIO_periph(w1_gpio_pdata.pin, 1); + at91_set_multi_drive(w1_gpio_pdata.pin, 1); + platform_device_register(&w1_device); +} + + +static void __init generic_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* NAND */ + add_device_nand(); + /* MMC */ +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) + at91_add_device_mci(0, &mmc_data); +#else + at91_add_device_mmc(0, &mmc_data); +#endif + /* USB Host */ + at91_add_device_usbh(&usbh_data); + /* Ethernet */ + at91_add_device_eth(&macb_data); + /* I2C */ + at91_add_device_i2c(NULL, 0); + /* W1 */ + add_w1(); +} + +static void __init portuxg20_board_init(void) +{ + generic_board_init(); + /* SPI */ + at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices)); + /* USB Device */ + at91_add_device_udc(&portuxg20_udc_data); + /* LEDs */ + at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds)); +} + +static void __init stamp9g20_board_init(void) +{ + generic_board_init(); + /* USB Device */ + at91_add_device_udc(&stamp9g20_udc_data); + /* LEDs */ + at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds)); +} + +MACHINE_START(PORTUXG20, "taskit PortuxG20") + /* Maintainer: taskit GmbH */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = portuxg20_map_io, + .init_irq = init_irq, + .init_machine = portuxg20_board_init, +MACHINE_END + +MACHINE_START(STAMP9G20, "taskit Stamp9G20") + /* Maintainer: taskit GmbH */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = stamp9g20_map_io, + .init_irq = init_irq, + .init_machine = stamp9g20_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index ceaec6c16eb2..df2ed848c9f8 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -39,6 +39,7 @@ #include <linux/usb/atmel_usba_udc.h> #include <linux/atmel-mci.h> #include <sound/atmel-ac97c.h> +#include <linux/serial.h> /* USB Device */ struct at91_udc_data { @@ -143,9 +144,10 @@ extern struct platform_device *atmel_default_console_device; extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); struct atmel_uart_data { - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virtual base address, if any */ + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virt. base address, if any */ + struct serial_rs485 rs485; /* rs485 settings */ }; extern void __init at91_add_device_serial(void); diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 5a0650101d45..833659d1200a 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -21,7 +21,7 @@ #define ARCH_ID_AT91SAM9260 0x019803a0 #define ARCH_ID_AT91SAM9261 0x019703a0 #define ARCH_ID_AT91SAM9263 0x019607a0 -#define ARCH_ID_AT91SAM9G10 0x819903a0 +#define ARCH_ID_AT91SAM9G10 0x019903a0 #define ARCH_ID_AT91SAM9G20 0x019905a0 #define ARCH_ID_AT91SAM9RL64 0x019b03a0 #define ARCH_ID_AT91SAM9G45 0x819b05a0 @@ -108,7 +108,7 @@ static inline unsigned long at91cap9_rev_identify(void) #endif #ifdef CONFIG_ARCH_AT91SAM9G10 -#define cpu_is_at91sam9g10() (at91_cpu_identify() == ARCH_ID_AT91SAM9G10) +#define cpu_is_at91sam9g10() ((at91_cpu_identify() & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) #else #define cpu_is_at91sam9g10() (0) #endif diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h index 5268af3933c2..c80e090b3670 100644 --- a/arch/arm/mach-at91/include/mach/system.h +++ b/arch/arm/mach-at91/include/mach/system.h @@ -24,21 +24,24 @@ #include <mach/hardware.h> #include <mach/at91_st.h> #include <mach/at91_dbgu.h> +#include <mach/at91_pmc.h> static inline void arch_idle(void) { +#ifndef CONFIG_DEBUG_KERNEL /* * Disable the processor clock. The processor will be automatically * re-enabled by an interrupt or by a reset. */ -// at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); - + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); +#else /* * Set the processor (CP15) into 'Wait for Interrupt' mode. * Unlike disabling the processor clock via the PMC (above) * this allows the processor to be woken via JTAG. */ cpu_do_idle(); +#endif } void (*at91_arch_reset)(void); diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 53dd2a9eecf9..2f139196d63d 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -29,6 +29,7 @@ #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/time.h> +#include <asm/pmu.h> #include <asm/mach/arch.h> #include <mach/dma.h> @@ -85,8 +86,23 @@ static struct platform_device nand_device = { .num_resources = ARRAY_SIZE(nand_resource), }; +static struct resource pmu_resource = { + .start = IRQ_PMUIRQ, + .end = IRQ_PMUIRQ, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .resource = &pmu_resource, + .num_resources = 1, +}; + + static struct platform_device *devices[] __initdata = { &nand_device, + &pmu_device, }; /**************************************************************************** diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c index a7b4591205a3..986592176767 100644 --- a/arch/arm/mach-clps711x/mm.c +++ b/arch/arm/mach-clps711x/mm.c @@ -22,7 +22,6 @@ #include <linux/kernel.h> #include <linux/mm.h> #include <linux/init.h> -#include <linux/bootmem.h> #include <asm/sizes.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig new file mode 100644 index 000000000000..9ebfcc46feb1 --- /dev/null +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -0,0 +1,12 @@ +menu "CNS3XXX platform type" + depends on ARCH_CNS3XXX + +config MACH_CNS3420VB + bool "Support for CNS3420 Validation Board" + help + Include support for the Cavium Networks CNS3420 MPCore Platform + Baseboard. + This is a platform with an on-board ARM11 MPCore and has support + for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc. + +endmenu diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile new file mode 100644 index 000000000000..427507a2d696 --- /dev/null +++ b/arch/arm/mach-cns3xxx/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_ARCH_CNS3XXX) += core.o pm.o +obj-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o diff --git a/arch/arm/mach-cns3xxx/Makefile.boot b/arch/arm/mach-cns3xxx/Makefile.boot new file mode 100644 index 000000000000..777012865220 --- /dev/null +++ b/arch/arm/mach-cns3xxx/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00C00000 diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c new file mode 100644 index 000000000000..2e30c8288740 --- /dev/null +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -0,0 +1,148 @@ +/* + * Cavium Networks CNS3420 Validation Board + * + * Copyright 2000 Deep Blue Solutions Ltd + * Copyright 2008 ARM Limited + * Copyright 2008 Cavium Networks + * Scott Shu + * Copyright 2010 MontaVista Software, LLC. + * Anton Vorontsov <avorontsov@mvista.com> + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/compiler.h> +#include <linux/io.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <mach/hardware.h> +#include <mach/cns3xxx.h> +#include <mach/irqs.h> +#include "core.h" + +/* + * NOR Flash + */ +static struct mtd_partition cns3420_nor_partitions[] = { + { + .name = "uboot", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .size = 0x004C0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "filesystem", + .size = 0x7000000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "filesystem2", + .size = 0x0AE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "ubootenv", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +static struct physmap_flash_data cns3420_nor_pdata = { + .width = 2, + .parts = cns3420_nor_partitions, + .nr_parts = ARRAY_SIZE(cns3420_nor_partitions), +}; + +static struct resource cns3420_nor_res = { + .start = CNS3XXX_FLASH_BASE, + .end = CNS3XXX_FLASH_BASE + SZ_128M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, +}; + +static struct platform_device cns3420_nor_pdev = { + .name = "physmap-flash", + .id = 0, + .resource = &cns3420_nor_res, + .num_resources = 1, + .dev = { + .platform_data = &cns3420_nor_pdata, + }, +}; + +/* + * UART + */ +static void __init cns3420_early_serial_setup(void) +{ +#ifdef CONFIG_SERIAL_8250_CONSOLE + static struct uart_port cns3420_serial_port = { + .membase = (void __iomem *)CNS3XXX_UART0_BASE_VIRT, + .mapbase = CNS3XXX_UART0_BASE, + .irq = IRQ_CNS3XXX_UART0, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE, + .regshift = 2, + .uartclk = 24000000, + .line = 0, + .type = PORT_16550A, + .fifosize = 16, + }; + + early_serial_setup(&cns3420_serial_port); +#endif +} + +/* + * Initialization + */ +static struct platform_device *cns3420_pdevs[] __initdata = { + &cns3420_nor_pdev, +}; + +static void __init cns3420_init(void) +{ + platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs)); + + pm_power_off = cns3xxx_power_off; +} + +static struct map_desc cns3420_io_desc[] __initdata = { + { + .virtual = CNS3XXX_UART0_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init cns3420_map_io(void) +{ + cns3xxx_map_io(); + iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc)); + + cns3420_early_serial_setup(); +} + +MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board") + .phys_io = CNS3XXX_UART0_BASE, + .io_pg_offst = (CNS3XXX_UART0_BASE_VIRT >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = cns3420_map_io, + .init_irq = cns3xxx_init_irq, + .timer = &cns3xxx_timer, + .init_machine = cns3420_init, +MACHINE_END diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c new file mode 100644 index 000000000000..9ca4d581016f --- /dev/null +++ b/arch/arm/mach-cns3xxx/core.c @@ -0,0 +1,249 @@ +/* + * Copyright 1999 - 2003 ARM Limited + * Copyright 2000 Deep Blue Solutions Ltd + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/clockchips.h> +#include <linux/io.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/mach/irq.h> +#include <asm/hardware/gic.h> +#include <mach/cns3xxx.h> +#include "core.h" + +static struct map_desc cns3xxx_io_desc[] __initdata = { + { + .virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_GPIOA_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_GPIOB_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_MISC_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_MISC_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = CNS3XXX_PM_BASE_VIRT, + .pfn = __phys_to_pfn(CNS3XXX_PM_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +void __init cns3xxx_map_io(void) +{ + iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc)); +} + +/* used by entry-macro.S */ +void __iomem *gic_cpu_base_addr; + +void __init cns3xxx_init_irq(void) +{ + gic_cpu_base_addr = __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT); + gic_dist_init(0, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), 29); + gic_cpu_init(0, gic_cpu_base_addr); +} + +void cns3xxx_power_off(void) +{ + u32 __iomem *pm_base = __io(CNS3XXX_PM_BASE_VIRT); + u32 clkctrl; + + printk(KERN_INFO "powering system down...\n"); + + clkctrl = readl(pm_base + PM_SYS_CLK_CTRL_OFFSET); + clkctrl &= 0xfffff1ff; + clkctrl |= (0x5 << 9); /* Hibernate */ + writel(clkctrl, pm_base + PM_SYS_CLK_CTRL_OFFSET); + +} + +/* + * Timer + */ +static void __iomem *cns3xxx_tmr1; + +static void cns3xxx_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + int pclk = cns3xxx_cpu_clock() / 8; + int reload; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + reload = pclk * 20 / (3 * HZ) * 0x25000; + writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); + ctrl |= (1 << 0) | (1 << 2) | (1 << 9); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* period set, and timer enabled in 'next_event' hook */ + ctrl |= (1 << 2) | (1 << 9); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + ctrl = 0; + } + + writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); +} + +static int cns3xxx_timer_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + + writel(evt, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); + writel(ctrl | (1 << 0), cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + + return 0; +} + +static struct clock_event_device cns3xxx_tmr1_clockevent = { + .name = "cns3xxx timer1", + .shift = 8, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = cns3xxx_timer_set_mode, + .set_next_event = cns3xxx_timer_set_next_event, + .rating = 350, + .cpumask = cpu_all_mask, +}; + +static void __init cns3xxx_clockevents_init(unsigned int timer_irq) +{ + cns3xxx_tmr1_clockevent.irq = timer_irq; + cns3xxx_tmr1_clockevent.mult = + div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC, + cns3xxx_tmr1_clockevent.shift); + cns3xxx_tmr1_clockevent.max_delta_ns = + clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent); + cns3xxx_tmr1_clockevent.min_delta_ns = + clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent); + + clockevents_register_device(&cns3xxx_tmr1_clockevent); +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &cns3xxx_tmr1_clockevent; + u32 __iomem *stat = cns3xxx_tmr1 + TIMER1_2_INTERRUPT_STATUS_OFFSET; + u32 val; + + /* Clear the interrupt */ + val = readl(stat); + writel(val & ~(1 << 2), stat); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction cns3xxx_timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = cns3xxx_timer_interrupt, +}; + +/* + * Set up the clock source and clock events devices + */ +static void __init __cns3xxx_timer_init(unsigned int timer_irq) +{ + u32 val; + u32 irq_mask; + + /* + * Initialise to a known state (all timers off) + */ + + /* disable timer1 and timer2 */ + writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + /* stop free running timer3 */ + writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET); + + /* timer1 */ + writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET); + writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); + + writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET); + writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET); + + /* mask irq, non-mask timer1 overflow */ + irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); + irq_mask &= ~(1 << 2); + irq_mask |= 0x03; + writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); + + /* down counter */ + val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + val |= (1 << 9); + writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + + /* timer2 */ + writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET); + writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET); + + /* mask irq */ + irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); + irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5)); + writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); + + /* down counter */ + val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + val |= (1 << 10); + writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + + /* Make irqs happen for the system timer */ + setup_irq(timer_irq, &cns3xxx_timer_irq); + + cns3xxx_clockevents_init(timer_irq); +} + +static void __init cns3xxx_timer_init(void) +{ + cns3xxx_tmr1 = __io(CNS3XXX_TIMER1_2_3_BASE_VIRT); + + __cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0); +} + +struct sys_timer cns3xxx_timer = { + .init = cns3xxx_timer_init, +}; diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h new file mode 100644 index 000000000000..6b33ec11346e --- /dev/null +++ b/arch/arm/mach-cns3xxx/core.h @@ -0,0 +1,23 @@ +/* + * Copyright 2000 Deep Blue Solutions Ltd + * Copyright 2004 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __CNS3XXX_CORE_H +#define __CNS3XXX_CORE_H + +extern void __iomem *gic_cpu_base_addr; +extern struct sys_timer cns3xxx_timer; + +void __init cns3xxx_map_io(void); +void __init cns3xxx_init_irq(void); +void cns3xxx_power_off(void); +void cns3xxx_pwr_power_up(unsigned int block); +void cns3xxx_pwr_power_down(unsigned int block); + +#endif /* __CNS3XXX_CORE_H */ diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h new file mode 100644 index 000000000000..8a2f5a21d4ee --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h @@ -0,0 +1,635 @@ +/* + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_BOARD_CNS3XXXH +#define __MACH_BOARD_CNS3XXXH + +/* + * Memory map + */ +#define CNS3XXX_FLASH_BASE 0x10000000 /* Flash/SRAM Memory Bank 0 */ +#define CNS3XXX_FLASH_SIZE SZ_256M + +#define CNS3XXX_DDR2SDRAM_BASE 0x20000000 /* DDR2 SDRAM Memory */ + +#define CNS3XXX_SPI_FLASH_BASE 0x60000000 /* SPI Serial Flash Memory */ + +#define CNS3XXX_SWITCH_BASE 0x70000000 /* Switch and HNAT Control */ +#define CNS3XXX_SWITCH_BASE_VIRT 0xFFF00000 + +#define CNS3XXX_PPE_BASE 0x70001000 /* HANT */ +#define CNS3XXX_PPE_BASE_VIRT 0xFFF50000 + +#define CNS3XXX_EMBEDDED_SRAM_BASE 0x70002000 /* HANT Embedded SRAM */ +#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT 0xFFF60000 + +#define CNS3XXX_SSP_BASE 0x71000000 /* Synchronous Serial Port - SPI/PCM/I2C */ +#define CNS3XXX_SSP_BASE_VIRT 0xFFF01000 + +#define CNS3XXX_DMC_BASE 0x72000000 /* DMC Control (DDR2 SDRAM) */ +#define CNS3XXX_DMC_BASE_VIRT 0xFFF02000 + +#define CNS3XXX_SMC_BASE 0x73000000 /* SMC Control */ +#define CNS3XXX_SMC_BASE_VIRT 0xFFF03000 + +#define SMC_MEMC_STATUS_OFFSET 0x000 +#define SMC_MEMIF_CFG_OFFSET 0x004 +#define SMC_MEMC_CFG_SET_OFFSET 0x008 +#define SMC_MEMC_CFG_CLR_OFFSET 0x00C +#define SMC_DIRECT_CMD_OFFSET 0x010 +#define SMC_SET_CYCLES_OFFSET 0x014 +#define SMC_SET_OPMODE_OFFSET 0x018 +#define SMC_REFRESH_PERIOD_0_OFFSET 0x020 +#define SMC_REFRESH_PERIOD_1_OFFSET 0x024 +#define SMC_SRAM_CYCLES0_0_OFFSET 0x100 +#define SMC_NAND_CYCLES0_0_OFFSET 0x100 +#define SMC_OPMODE0_0_OFFSET 0x104 +#define SMC_SRAM_CYCLES0_1_OFFSET 0x120 +#define SMC_NAND_CYCLES0_1_OFFSET 0x120 +#define SMC_OPMODE0_1_OFFSET 0x124 +#define SMC_USER_STATUS_OFFSET 0x200 +#define SMC_USER_CONFIG_OFFSET 0x204 +#define SMC_ECC_STATUS_OFFSET 0x300 +#define SMC_ECC_MEMCFG_OFFSET 0x304 +#define SMC_ECC_MEMCOMMAND1_OFFSET 0x308 +#define SMC_ECC_MEMCOMMAND2_OFFSET 0x30C +#define SMC_ECC_ADDR0_OFFSET 0x310 +#define SMC_ECC_ADDR1_OFFSET 0x314 +#define SMC_ECC_VALUE0_OFFSET 0x318 +#define SMC_ECC_VALUE1_OFFSET 0x31C +#define SMC_ECC_VALUE2_OFFSET 0x320 +#define SMC_ECC_VALUE3_OFFSET 0x324 +#define SMC_PERIPH_ID_0_OFFSET 0xFE0 +#define SMC_PERIPH_ID_1_OFFSET 0xFE4 +#define SMC_PERIPH_ID_2_OFFSET 0xFE8 +#define SMC_PERIPH_ID_3_OFFSET 0xFEC +#define SMC_PCELL_ID_0_OFFSET 0xFF0 +#define SMC_PCELL_ID_1_OFFSET 0xFF4 +#define SMC_PCELL_ID_2_OFFSET 0xFF8 +#define SMC_PCELL_ID_3_OFFSET 0xFFC + +#define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */ +#define CNS3XXX_GPIOA_BASE_VIRT 0xFFF04000 + +#define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */ +#define CNS3XXX_GPIOB_BASE_VIRT 0xFFF05000 + +#define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */ +#define CNS3XXX_RTC_BASE_VIRT 0xFFF06000 + +#define RTC_SEC_OFFSET 0x00 +#define RTC_MIN_OFFSET 0x04 +#define RTC_HOUR_OFFSET 0x08 +#define RTC_DAY_OFFSET 0x0C +#define RTC_SEC_ALM_OFFSET 0x10 +#define RTC_MIN_ALM_OFFSET 0x14 +#define RTC_HOUR_ALM_OFFSET 0x18 +#define RTC_REC_OFFSET 0x1C +#define RTC_CTRL_OFFSET 0x20 +#define RTC_INTR_STS_OFFSET 0x34 + +#define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */ +#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */ + +#define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */ +#define CNS3XXX_PM_BASE_VIRT 0xFFF08000 + +#define PM_CLK_GATE_OFFSET 0x00 +#define PM_SOFT_RST_OFFSET 0x04 +#define PM_HS_CFG_OFFSET 0x08 +#define PM_CACTIVE_STA_OFFSET 0x0C +#define PM_PWR_STA_OFFSET 0x10 +#define PM_SYS_CLK_CTRL_OFFSET 0x14 +#define PM_PLL_LCD_I2S_CTRL_OFFSET 0x18 +#define PM_PLL_HM_PD_OFFSET 0x1C + +#define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */ +#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000 + +#define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */ +#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000 + +#define CNS3XXX_UART2_BASE 0x78800000 /* UART 2 */ +#define CNS3XXX_UART2_BASE_VIRT 0xFFF0B000 + +#define CNS3XXX_DMAC_BASE 0x79000000 /* Generic DMA Control */ +#define CNS3XXX_DMAC_BASE_VIRT 0xFFF0D000 + +#define CNS3XXX_CORESIGHT_BASE 0x7A000000 /* CoreSight */ +#define CNS3XXX_CORESIGHT_BASE_VIRT 0xFFF0E000 + +#define CNS3XXX_CRYPTO_BASE 0x7B000000 /* Crypto */ +#define CNS3XXX_CRYPTO_BASE_VIRT 0xFFF0F000 + +#define CNS3XXX_I2S_BASE 0x7C000000 /* I2S */ +#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000 + +#define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */ +#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800 + +#define TIMER1_COUNTER_OFFSET 0x00 +#define TIMER1_AUTO_RELOAD_OFFSET 0x04 +#define TIMER1_MATCH_V1_OFFSET 0x08 +#define TIMER1_MATCH_V2_OFFSET 0x0C + +#define TIMER2_COUNTER_OFFSET 0x10 +#define TIMER2_AUTO_RELOAD_OFFSET 0x14 +#define TIMER2_MATCH_V1_OFFSET 0x18 +#define TIMER2_MATCH_V2_OFFSET 0x1C + +#define TIMER1_2_CONTROL_OFFSET 0x30 +#define TIMER1_2_INTERRUPT_STATUS_OFFSET 0x34 +#define TIMER1_2_INTERRUPT_MASK_OFFSET 0x38 + +#define TIMER_FREERUN_OFFSET 0x40 +#define TIMER_FREERUN_CONTROL_OFFSET 0x44 + +#define CNS3XXX_HCIE_BASE 0x7D000000 /* HCIE Control */ +#define CNS3XXX_HCIE_BASE_VIRT 0xFFF30000 + +#define CNS3XXX_RAID_BASE 0x7E000000 /* RAID Control */ +#define CNS3XXX_RAID_BASE_VIRT 0xFFF12000 + +#define CNS3XXX_AXI_IXC_BASE 0x7F000000 /* AXI IXC */ +#define CNS3XXX_AXI_IXC_BASE_VIRT 0xFFF13000 + +#define CNS3XXX_CLCD_BASE 0x80000000 /* LCD Control */ +#define CNS3XXX_CLCD_BASE_VIRT 0xFFF14000 + +#define CNS3XXX_USBOTG_BASE 0x81000000 /* USB OTG Control */ +#define CNS3XXX_USBOTG_BASE_VIRT 0xFFF15000 + +#define CNS3XXX_USB_BASE 0x82000000 /* USB Host Control */ +#define CNS3XXX_USB_BASE_VIRT 0xFFF16000 + +#define CNS3XXX_SATA2_BASE 0x83000000 /* SATA */ +#define CNS3XXX_SATA2_SIZE SZ_16M +#define CNS3XXX_SATA2_BASE_VIRT 0xFFF17000 + +#define CNS3XXX_CAMERA_BASE 0x84000000 /* Camera Interface */ +#define CNS3XXX_CAMERA_BASE_VIRT 0xFFF18000 + +#define CNS3XXX_SDIO_BASE 0x85000000 /* SDIO */ +#define CNS3XXX_SDIO_BASE_VIRT 0xFFF19000 + +#define CNS3XXX_I2S_TDM_BASE 0x86000000 /* I2S TDM */ +#define CNS3XXX_I2S_TDM_BASE_VIRT 0xFFF1A000 + +#define CNS3XXX_2DG_BASE 0x87000000 /* 2D Graphic Control */ +#define CNS3XXX_2DG_BASE_VIRT 0xFFF1B000 + +#define CNS3XXX_USB_OHCI_BASE 0x88000000 /* USB OHCI */ +#define CNS3XXX_USB_OHCI_BASE_VIRT 0xFFF1C000 + +#define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */ +#define CNS3XXX_L2C_BASE_VIRT 0xFFF27000 + +#define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */ +#define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000 + +#define CNS3XXX_PCIE0_HOST_BASE 0xAB000000 /* PCIe Port 0 RC Base */ +#define CNS3XXX_PCIE0_HOST_BASE_VIRT 0xE1000000 + +#define CNS3XXX_PCIE0_IO_BASE 0xAC000000 /* PCIe Port 0 */ +#define CNS3XXX_PCIE0_IO_BASE_VIRT 0xE2000000 + +#define CNS3XXX_PCIE0_CFG0_BASE 0xAD000000 /* PCIe Port 0 CFG Type 0 */ +#define CNS3XXX_PCIE0_CFG0_BASE_VIRT 0xE3000000 + +#define CNS3XXX_PCIE0_CFG1_BASE 0xAE000000 /* PCIe Port 0 CFG Type 1 */ +#define CNS3XXX_PCIE0_CFG1_BASE_VIRT 0xE4000000 + +#define CNS3XXX_PCIE0_MSG_BASE 0xAF000000 /* PCIe Port 0 Message Space */ +#define CNS3XXX_PCIE0_MSG_BASE_VIRT 0xE5000000 + +#define CNS3XXX_PCIE1_MEM_BASE 0xB0000000 /* PCIe Port 1 IO/Memory Space */ +#define CNS3XXX_PCIE1_MEM_BASE_VIRT 0xE8000000 + +#define CNS3XXX_PCIE1_HOST_BASE 0xBB000000 /* PCIe Port 1 RC Base */ +#define CNS3XXX_PCIE1_HOST_BASE_VIRT 0xE9000000 + +#define CNS3XXX_PCIE1_IO_BASE 0xBC000000 /* PCIe Port 1 */ +#define CNS3XXX_PCIE1_IO_BASE_VIRT 0xEA000000 + +#define CNS3XXX_PCIE1_CFG0_BASE 0xBD000000 /* PCIe Port 1 CFG Type 0 */ +#define CNS3XXX_PCIE1_CFG0_BASE_VIRT 0xEB000000 + +#define CNS3XXX_PCIE1_CFG1_BASE 0xBE000000 /* PCIe Port 1 CFG Type 1 */ +#define CNS3XXX_PCIE1_CFG1_BASE_VIRT 0xEC000000 + +#define CNS3XXX_PCIE1_MSG_BASE 0xBF000000 /* PCIe Port 1 Message Space */ +#define CNS3XXX_PCIE1_MSG_BASE_VIRT 0xED000000 + +/* + * Testchip peripheral and fpga gic regions + */ +#define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */ +#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000 + +#define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */ +#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100 + +#define CNS3XXX_TC11MP_TWD_BASE 0x90000600 +#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600 + +#define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */ +#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000 + +#define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */ +#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000 + +/* + * Misc block + */ +#define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs)) +#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + (offset)))) + +#define MISC_MEMORY_REMAP_REG MISC_MEM_MAP_VALUE(0x00) +#define MISC_CHIP_CONFIG_REG MISC_MEM_MAP_VALUE(0x04) +#define MISC_DEBUG_PROBE_DATA_REG MISC_MEM_MAP_VALUE(0x08) +#define MISC_DEBUG_PROBE_SELECTION_REG MISC_MEM_MAP_VALUE(0x0C) +#define MISC_IO_PIN_FUNC_SELECTION_REG MISC_MEM_MAP_VALUE(0x10) +#define MISC_GPIOA_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x14) +#define MISC_GPIOB_PIN_ENABLE_REG MISC_MEM_MAP_VALUE(0x18) +#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A MISC_MEM_MAP_VALUE(0x1C) +#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B MISC_MEM_MAP_VALUE(0x20) +#define MISC_GPIOA_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x24) +#define MISC_GPIOA_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x28) +#define MISC_GPIOB_15_0_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x2C) +#define MISC_GPIOB_16_31_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x30) +#define MISC_IO_PULL_CTRL_REG MISC_MEM_MAP_VALUE(0x34) +#define MISC_E_FUSE_31_0_REG MISC_MEM_MAP_VALUE(0x40) +#define MISC_E_FUSE_63_32_REG MISC_MEM_MAP_VALUE(0x44) +#define MISC_E_FUSE_95_64_REG MISC_MEM_MAP_VALUE(0x48) +#define MISC_E_FUSE_127_96_REG MISC_MEM_MAP_VALUE(0x4C) +#define MISC_SOFTWARE_TEST_1_REG MISC_MEM_MAP_VALUE(0x50) +#define MISC_SOFTWARE_TEST_2_REG MISC_MEM_MAP_VALUE(0x54) + +#define MISC_SATA_POWER_MODE MISC_MEM_MAP_VALUE(0x310) + +#define MISC_USB_CFG_REG MISC_MEM_MAP_VALUE(0x800) +#define MISC_USB_STS_REG MISC_MEM_MAP_VALUE(0x804) +#define MISC_USBPHY00_CFG_REG MISC_MEM_MAP_VALUE(0x808) +#define MISC_USBPHY01_CFG_REG MISC_MEM_MAP_VALUE(0x80c) +#define MISC_USBPHY10_CFG_REG MISC_MEM_MAP_VALUE(0x810) +#define MISC_USBPHY11_CFG_REG MISC_MEM_MAP_VALUE(0x814) + +#define MISC_PCIEPHY_CMCTL(x) MISC_MEM_MAP(0x900 + (x) * 0x004) +#define MISC_PCIEPHY_CTL(x) MISC_MEM_MAP(0x940 + (x) * 0x100) +#define MISC_PCIE_AXIS_AWMISC(x) MISC_MEM_MAP(0x944 + (x) * 0x100) +#define MISC_PCIE_AXIS_ARMISC(x) MISC_MEM_MAP(0x948 + (x) * 0x100) +#define MISC_PCIE_AXIS_RMISC(x) MISC_MEM_MAP(0x94C + (x) * 0x100) +#define MISC_PCIE_AXIS_BMISC(x) MISC_MEM_MAP(0x950 + (x) * 0x100) +#define MISC_PCIE_AXIM_RMISC(x) MISC_MEM_MAP(0x954 + (x) * 0x100) +#define MISC_PCIE_AXIM_BMISC(x) MISC_MEM_MAP(0x958 + (x) * 0x100) +#define MISC_PCIE_CTRL(x) MISC_MEM_MAP(0x95C + (x) * 0x100) +#define MISC_PCIE_PM_DEBUG(x) MISC_MEM_MAP(0x960 + (x) * 0x100) +#define MISC_PCIE_RFC_DEBUG(x) MISC_MEM_MAP(0x964 + (x) * 0x100) +#define MISC_PCIE_CXPL_DEBUGL(x) MISC_MEM_MAP(0x968 + (x) * 0x100) +#define MISC_PCIE_CXPL_DEBUGH(x) MISC_MEM_MAP(0x96C + (x) * 0x100) +#define MISC_PCIE_DIAG_DEBUGH(x) MISC_MEM_MAP(0x970 + (x) * 0x100) +#define MISC_PCIE_W1CLR(x) MISC_MEM_MAP(0x974 + (x) * 0x100) +#define MISC_PCIE_INT_MASK(x) MISC_MEM_MAP(0x978 + (x) * 0x100) +#define MISC_PCIE_INT_STATUS(x) MISC_MEM_MAP(0x97C + (x) * 0x100) + +/* + * Power management and clock control + */ +#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT + (offset)))) + +#define PM_CLK_GATE_REG PMU_REG_VALUE(0x000) +#define PM_SOFT_RST_REG PMU_REG_VALUE(0x004) +#define PM_HS_CFG_REG PMU_REG_VALUE(0x008) +#define PM_CACTIVE_STA_REG PMU_REG_VALUE(0x00C) +#define PM_PWR_STA_REG PMU_REG_VALUE(0x010) +#define PM_CLK_CTRL_REG PMU_REG_VALUE(0x014) +#define PM_PLL_LCD_I2S_CTRL_REG PMU_REG_VALUE(0x018) +#define PM_PLL_HM_PD_CTRL_REG PMU_REG_VALUE(0x01C) +#define PM_REGULAT_CTRL_REG PMU_REG_VALUE(0x020) +#define PM_WDT_CTRL_REG PMU_REG_VALUE(0x024) +#define PM_WU_CTRL0_REG PMU_REG_VALUE(0x028) +#define PM_WU_CTRL1_REG PMU_REG_VALUE(0x02C) +#define PM_CSR_REG PMU_REG_VALUE(0x030) + +/* PM_CLK_GATE_REG */ +#define PM_CLK_GATE_REG_OFFSET_SDIO (25) +#define PM_CLK_GATE_REG_OFFSET_GPU (24) +#define PM_CLK_GATE_REG_OFFSET_CIM (23) +#define PM_CLK_GATE_REG_OFFSET_LCDC (22) +#define PM_CLK_GATE_REG_OFFSET_I2S (21) +#define PM_CLK_GATE_REG_OFFSET_RAID (20) +#define PM_CLK_GATE_REG_OFFSET_SATA (19) +#define PM_CLK_GATE_REG_OFFSET_PCIE(x) (17 + (x)) +#define PM_CLK_GATE_REG_OFFSET_USB_HOST (16) +#define PM_CLK_GATE_REG_OFFSET_USB_OTG (15) +#define PM_CLK_GATE_REG_OFFSET_TIMER (14) +#define PM_CLK_GATE_REG_OFFSET_CRYPTO (13) +#define PM_CLK_GATE_REG_OFFSET_HCIE (12) +#define PM_CLK_GATE_REG_OFFSET_SWITCH (11) +#define PM_CLK_GATE_REG_OFFSET_GPIO (10) +#define PM_CLK_GATE_REG_OFFSET_UART3 (9) +#define PM_CLK_GATE_REG_OFFSET_UART2 (8) +#define PM_CLK_GATE_REG_OFFSET_UART1 (7) +#define PM_CLK_GATE_REG_OFFSET_RTC (5) +#define PM_CLK_GATE_REG_OFFSET_GDMA (4) +#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C (3) +#define PM_CLK_GATE_REG_OFFSET_SMC_NFI (1) +#define PM_CLK_GATE_REG_MASK (0x03FFFFBA) + +/* PM_SOFT_RST_REG */ +#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG (31) +#define PM_SOFT_RST_REG_OFFST_CPU1 (29) +#define PM_SOFT_RST_REG_OFFST_CPU0 (28) +#define PM_SOFT_RST_REG_OFFST_SDIO (25) +#define PM_SOFT_RST_REG_OFFST_GPU (24) +#define PM_SOFT_RST_REG_OFFST_CIM (23) +#define PM_SOFT_RST_REG_OFFST_LCDC (22) +#define PM_SOFT_RST_REG_OFFST_I2S (21) +#define PM_SOFT_RST_REG_OFFST_RAID (20) +#define PM_SOFT_RST_REG_OFFST_SATA (19) +#define PM_SOFT_RST_REG_OFFST_PCIE(x) (17 + (x)) +#define PM_SOFT_RST_REG_OFFST_USB_HOST (16) +#define PM_SOFT_RST_REG_OFFST_USB_OTG (15) +#define PM_SOFT_RST_REG_OFFST_TIMER (14) +#define PM_SOFT_RST_REG_OFFST_CRYPTO (13) +#define PM_SOFT_RST_REG_OFFST_HCIE (12) +#define PM_SOFT_RST_REG_OFFST_SWITCH (11) +#define PM_SOFT_RST_REG_OFFST_GPIO (10) +#define PM_SOFT_RST_REG_OFFST_UART3 (9) +#define PM_SOFT_RST_REG_OFFST_UART2 (8) +#define PM_SOFT_RST_REG_OFFST_UART1 (7) +#define PM_SOFT_RST_REG_OFFST_RTC (5) +#define PM_SOFT_RST_REG_OFFST_GDMA (4) +#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C (3) +#define PM_SOFT_RST_REG_OFFST_DMC (2) +#define PM_SOFT_RST_REG_OFFST_SMC_NFI (1) +#define PM_SOFT_RST_REG_OFFST_GLOBAL (0) +#define PM_SOFT_RST_REG_MASK (0xF3FFFFBF) + +/* PMHS_CFG_REG */ +#define PM_HS_CFG_REG_OFFSET_SDIO (25) +#define PM_HS_CFG_REG_OFFSET_GPU (24) +#define PM_HS_CFG_REG_OFFSET_CIM (23) +#define PM_HS_CFG_REG_OFFSET_LCDC (22) +#define PM_HS_CFG_REG_OFFSET_I2S (21) +#define PM_HS_CFG_REG_OFFSET_RAID (20) +#define PM_HS_CFG_REG_OFFSET_SATA (19) +#define PM_HS_CFG_REG_OFFSET_PCIE1 (18) +#define PM_HS_CFG_REG_OFFSET_PCIE0 (17) +#define PM_HS_CFG_REG_OFFSET_USB_HOST (16) +#define PM_HS_CFG_REG_OFFSET_USB_OTG (15) +#define PM_HS_CFG_REG_OFFSET_TIMER (14) +#define PM_HS_CFG_REG_OFFSET_CRYPTO (13) +#define PM_HS_CFG_REG_OFFSET_HCIE (12) +#define PM_HS_CFG_REG_OFFSET_SWITCH (11) +#define PM_HS_CFG_REG_OFFSET_GPIO (10) +#define PM_HS_CFG_REG_OFFSET_UART3 (9) +#define PM_HS_CFG_REG_OFFSET_UART2 (8) +#define PM_HS_CFG_REG_OFFSET_UART1 (7) +#define PM_HS_CFG_REG_OFFSET_RTC (5) +#define PM_HS_CFG_REG_OFFSET_GDMA (4) +#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S (3) +#define PM_HS_CFG_REG_OFFSET_DMC (2) +#define PM_HS_CFG_REG_OFFSET_SMC_NFI (1) +#define PM_HS_CFG_REG_MASK (0x03FFFFBE) +#define PM_HS_CFG_REG_MASK_SUPPORT (0x01100806) + +/* PM_CACTIVE_STA_REG */ +#define PM_CACTIVE_STA_REG_OFFSET_SDIO (25) +#define PM_CACTIVE_STA_REG_OFFSET_GPU (24) +#define PM_CACTIVE_STA_REG_OFFSET_CIM (23) +#define PM_CACTIVE_STA_REG_OFFSET_LCDC (22) +#define PM_CACTIVE_STA_REG_OFFSET_I2S (21) +#define PM_CACTIVE_STA_REG_OFFSET_RAID (20) +#define PM_CACTIVE_STA_REG_OFFSET_SATA (19) +#define PM_CACTIVE_STA_REG_OFFSET_PCIE1 (18) +#define PM_CACTIVE_STA_REG_OFFSET_PCIE0 (17) +#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST (16) +#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG (15) +#define PM_CACTIVE_STA_REG_OFFSET_TIMER (14) +#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO (13) +#define PM_CACTIVE_STA_REG_OFFSET_HCIE (12) +#define PM_CACTIVE_STA_REG_OFFSET_SWITCH (11) +#define PM_CACTIVE_STA_REG_OFFSET_GPIO (10) +#define PM_CACTIVE_STA_REG_OFFSET_UART3 (9) +#define PM_CACTIVE_STA_REG_OFFSET_UART2 (8) +#define PM_CACTIVE_STA_REG_OFFSET_UART1 (7) +#define PM_CACTIVE_STA_REG_OFFSET_RTC (5) +#define PM_CACTIVE_STA_REG_OFFSET_GDMA (4) +#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S (3) +#define PM_CACTIVE_STA_REG_OFFSET_DMC (2) +#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI (1) +#define PM_CACTIVE_STA_REG_MASK (0x03FFFFBE) + +/* PM_PWR_STA_REG */ +#define PM_PWR_STA_REG_REG_OFFSET_SDIO (25) +#define PM_PWR_STA_REG_REG_OFFSET_GPU (24) +#define PM_PWR_STA_REG_REG_OFFSET_CIM (23) +#define PM_PWR_STA_REG_REG_OFFSET_LCDC (22) +#define PM_PWR_STA_REG_REG_OFFSET_I2S (21) +#define PM_PWR_STA_REG_REG_OFFSET_RAID (20) +#define PM_PWR_STA_REG_REG_OFFSET_SATA (19) +#define PM_PWR_STA_REG_REG_OFFSET_PCIE1 (18) +#define PM_PWR_STA_REG_REG_OFFSET_PCIE0 (17) +#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST (16) +#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG (15) +#define PM_PWR_STA_REG_REG_OFFSET_TIMER (14) +#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO (13) +#define PM_PWR_STA_REG_REG_OFFSET_HCIE (12) +#define PM_PWR_STA_REG_REG_OFFSET_SWITCH (11) +#define PM_PWR_STA_REG_REG_OFFSET_GPIO (10) +#define PM_PWR_STA_REG_REG_OFFSET_UART3 (9) +#define PM_PWR_STA_REG_REG_OFFSET_UART2 (8) +#define PM_PWR_STA_REG_REG_OFFSET_UART1 (7) +#define PM_PWR_STA_REG_REG_OFFSET_RTC (5) +#define PM_PWR_STA_REG_REG_OFFSET_GDMA (4) +#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S (3) +#define PM_PWR_STA_REG_REG_OFFSET_DMC (2) +#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI (1) +#define PM_PWR_STA_REG_REG_MASK (0x03FFFFBE) + +/* PM_CLK_CTRL_REG */ +#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK (31) +#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN (30) +#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN (29) +#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN (28) +#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE (27) +#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV (24) +#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL (22) +#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV (20) +#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL (16) +#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV (14) +#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL (12) +#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE (9) +#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL (7) +#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE (6) +#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV (4) +#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL (0) + +#define PM_CPU_CLK_DIV(DIV) { \ + PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \ + PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \ +} + +#define PM_PLL_CPU_SEL(CPU) { \ + PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \ + PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \ +} + +/* PM_PLL_LCD_I2S_CTRL_REG */ +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV (22) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL (17) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P (11) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M (3) +#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S (0) + +/* PM_PLL_HM_PD_CTRL_REG */ +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1 (11) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0 (10) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD (6) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S (5) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD (4) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB (3) +#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII (2) +#define PM_PLL_HM_PD_CTRL_REG_MASK (0x00000C7C) + +/* PM_WDT_CTRL_REG */ +#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY (0) + +/* PM_CSR_REG - Clock Scaling Register*/ +#define PM_CSR_REG_OFFSET_CSR_EN (30) +#define PM_CSR_REG_OFFSET_CSR_NUM (0) + +#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK) + +/* Software reset*/ +#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK) + +/* + * CNS3XXX support several power saving mode as following, + * DFS, IDLE, HALT, DOZE, SLEEP, Hibernate + */ +#define CNS3XXX_PWR_CPU_MODE_DFS (0) +#define CNS3XXX_PWR_CPU_MODE_IDLE (1) +#define CNS3XXX_PWR_CPU_MODE_HALT (2) +#define CNS3XXX_PWR_CPU_MODE_DOZE (3) +#define CNS3XXX_PWR_CPU_MODE_SLEEP (4) +#define CNS3XXX_PWR_CPU_MODE_HIBERNATE (5) + +#define CNS3XXX_PWR_PLL(BLOCK) (0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK) +#define CNS3XXX_PWR_PLL_ALL PM_PLL_HM_PD_CTRL_REG_MASK + +/* Change CPU frequency and divider */ +#define CNS3XXX_PWR_PLL_CPU_300MHZ (0) +#define CNS3XXX_PWR_PLL_CPU_333MHZ (1) +#define CNS3XXX_PWR_PLL_CPU_366MHZ (2) +#define CNS3XXX_PWR_PLL_CPU_400MHZ (3) +#define CNS3XXX_PWR_PLL_CPU_433MHZ (4) +#define CNS3XXX_PWR_PLL_CPU_466MHZ (5) +#define CNS3XXX_PWR_PLL_CPU_500MHZ (6) +#define CNS3XXX_PWR_PLL_CPU_533MHZ (7) +#define CNS3XXX_PWR_PLL_CPU_566MHZ (8) +#define CNS3XXX_PWR_PLL_CPU_600MHZ (9) +#define CNS3XXX_PWR_PLL_CPU_633MHZ (10) +#define CNS3XXX_PWR_PLL_CPU_666MHZ (11) +#define CNS3XXX_PWR_PLL_CPU_700MHZ (12) + +#define CNS3XXX_PWR_CPU_CLK_DIV_BY1 (0) +#define CNS3XXX_PWR_CPU_CLK_DIV_BY2 (1) +#define CNS3XXX_PWR_CPU_CLK_DIV_BY4 (2) + +/* Change DDR2 frequency */ +#define CNS3XXX_PWR_PLL_DDR2_200MHZ (0) +#define CNS3XXX_PWR_PLL_DDR2_266MHZ (1) +#define CNS3XXX_PWR_PLL_DDR2_333MHZ (2) +#define CNS3XXX_PWR_PLL_DDR2_400MHZ (3) + +void cns3xxx_pwr_soft_rst(unsigned int block); +void cns3xxx_pwr_clk_en(unsigned int block); +int cns3xxx_cpu_clock(void); + +/* + * ARM11 MPCore interrupt sources (primary GIC) + */ +#define IRQ_CNS3XXX_PMU (IRQ_TC11MP_GIC_START + 0) +#define IRQ_CNS3XXX_SDIO (IRQ_TC11MP_GIC_START + 1) +#define IRQ_CNS3XXX_L2CC (IRQ_TC11MP_GIC_START + 2) +#define IRQ_CNS3XXX_RTC (IRQ_TC11MP_GIC_START + 3) +#define IRQ_CNS3XXX_I2S (IRQ_TC11MP_GIC_START + 4) +#define IRQ_CNS3XXX_PCM (IRQ_TC11MP_GIC_START + 5) +#define IRQ_CNS3XXX_SPI (IRQ_TC11MP_GIC_START + 6) +#define IRQ_CNS3XXX_I2C (IRQ_TC11MP_GIC_START + 7) +#define IRQ_CNS3XXX_CIM (IRQ_TC11MP_GIC_START + 8) +#define IRQ_CNS3XXX_GPU (IRQ_TC11MP_GIC_START + 9) +#define IRQ_CNS3XXX_LCD (IRQ_TC11MP_GIC_START + 10) +#define IRQ_CNS3XXX_GPIOA (IRQ_TC11MP_GIC_START + 11) +#define IRQ_CNS3XXX_GPIOB (IRQ_TC11MP_GIC_START + 12) +#define IRQ_CNS3XXX_UART0 (IRQ_TC11MP_GIC_START + 13) +#define IRQ_CNS3XXX_UART1 (IRQ_TC11MP_GIC_START + 14) +#define IRQ_CNS3XXX_UART2 (IRQ_TC11MP_GIC_START + 15) +#define IRQ_CNS3XXX_ARM11 (IRQ_TC11MP_GIC_START + 16) + +#define IRQ_CNS3XXX_SW_STATUS (IRQ_TC11MP_GIC_START + 17) +#define IRQ_CNS3XXX_SW_R0TXC (IRQ_TC11MP_GIC_START + 18) +#define IRQ_CNS3XXX_SW_R0RXC (IRQ_TC11MP_GIC_START + 19) +#define IRQ_CNS3XXX_SW_R0QE (IRQ_TC11MP_GIC_START + 20) +#define IRQ_CNS3XXX_SW_R0QF (IRQ_TC11MP_GIC_START + 21) +#define IRQ_CNS3XXX_SW_R1TXC (IRQ_TC11MP_GIC_START + 22) +#define IRQ_CNS3XXX_SW_R1RXC (IRQ_TC11MP_GIC_START + 23) +#define IRQ_CNS3XXX_SW_R1QE (IRQ_TC11MP_GIC_START + 24) +#define IRQ_CNS3XXX_SW_R1QF (IRQ_TC11MP_GIC_START + 25) +#define IRQ_CNS3XXX_SW_PPE (IRQ_TC11MP_GIC_START + 26) + +#define IRQ_CNS3XXX_CRYPTO (IRQ_TC11MP_GIC_START + 27) +#define IRQ_CNS3XXX_HCIE (IRQ_TC11MP_GIC_START + 28) +#define IRQ_CNS3XXX_PCIE0_DEVICE (IRQ_TC11MP_GIC_START + 29) +#define IRQ_CNS3XXX_PCIE1_DEVICE (IRQ_TC11MP_GIC_START + 30) +#define IRQ_CNS3XXX_USB_OTG (IRQ_TC11MP_GIC_START + 31) +#define IRQ_CNS3XXX_USB_EHCI (IRQ_TC11MP_GIC_START + 32) +#define IRQ_CNS3XXX_SATA (IRQ_TC11MP_GIC_START + 33) +#define IRQ_CNS3XXX_RAID (IRQ_TC11MP_GIC_START + 34) +#define IRQ_CNS3XXX_SMC (IRQ_TC11MP_GIC_START + 35) + +#define IRQ_CNS3XXX_DMAC_ABORT (IRQ_TC11MP_GIC_START + 36) +#define IRQ_CNS3XXX_DMAC0 (IRQ_TC11MP_GIC_START + 37) +#define IRQ_CNS3XXX_DMAC1 (IRQ_TC11MP_GIC_START + 38) +#define IRQ_CNS3XXX_DMAC2 (IRQ_TC11MP_GIC_START + 39) +#define IRQ_CNS3XXX_DMAC3 (IRQ_TC11MP_GIC_START + 40) +#define IRQ_CNS3XXX_DMAC4 (IRQ_TC11MP_GIC_START + 41) +#define IRQ_CNS3XXX_DMAC5 (IRQ_TC11MP_GIC_START + 42) +#define IRQ_CNS3XXX_DMAC6 (IRQ_TC11MP_GIC_START + 43) +#define IRQ_CNS3XXX_DMAC7 (IRQ_TC11MP_GIC_START + 44) +#define IRQ_CNS3XXX_DMAC8 (IRQ_TC11MP_GIC_START + 45) +#define IRQ_CNS3XXX_DMAC9 (IRQ_TC11MP_GIC_START + 46) +#define IRQ_CNS3XXX_DMAC10 (IRQ_TC11MP_GIC_START + 47) +#define IRQ_CNS3XXX_DMAC11 (IRQ_TC11MP_GIC_START + 48) +#define IRQ_CNS3XXX_DMAC12 (IRQ_TC11MP_GIC_START + 49) +#define IRQ_CNS3XXX_DMAC13 (IRQ_TC11MP_GIC_START + 50) +#define IRQ_CNS3XXX_DMAC14 (IRQ_TC11MP_GIC_START + 51) +#define IRQ_CNS3XXX_DMAC15 (IRQ_TC11MP_GIC_START + 52) +#define IRQ_CNS3XXX_DMAC16 (IRQ_TC11MP_GIC_START + 53) +#define IRQ_CNS3XXX_DMAC17 (IRQ_TC11MP_GIC_START + 54) + +#define IRQ_CNS3XXX_PCIE0_RC (IRQ_TC11MP_GIC_START + 55) +#define IRQ_CNS3XXX_PCIE1_RC (IRQ_TC11MP_GIC_START + 56) +#define IRQ_CNS3XXX_TIMER0 (IRQ_TC11MP_GIC_START + 57) +#define IRQ_CNS3XXX_TIMER1 (IRQ_TC11MP_GIC_START + 58) +#define IRQ_CNS3XXX_USB_OHCI (IRQ_TC11MP_GIC_START + 59) +#define IRQ_CNS3XXX_TIMER2 (IRQ_TC11MP_GIC_START + 60) +#define IRQ_CNS3XXX_EXTERNAL_PIN0 (IRQ_TC11MP_GIC_START + 61) +#define IRQ_CNS3XXX_EXTERNAL_PIN1 (IRQ_TC11MP_GIC_START + 62) +#define IRQ_CNS3XXX_EXTERNAL_PIN2 (IRQ_TC11MP_GIC_START + 63) + +#define NR_IRQS_CNS3XXX (IRQ_TC11MP_GIC_START + 64) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_CNS3XXX +#endif + +#endif /* __MACH_BOARD_CNS3XXX_H */ diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S new file mode 100644 index 000000000000..d16ce7eb00e9 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S @@ -0,0 +1,21 @@ +/* + * Debugging macro include header + * + * Copyright 1994-1999 Russell King + * Copyright 2008 Cavium Networks + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x10000000 + movne \rx, #0xf0000000 @ virtual base + orr \rx, \rx, #0x00009000 + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S new file mode 100644 index 000000000000..5e1c5545680f --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -0,0 +1,82 @@ +/* + * Low-level IRQ helper macros for Cavium Networks platforms + * + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <mach/hardware.h> +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/mach-cns3xxx/include/mach/hardware.h b/arch/arm/mach-cns3xxx/include/mach/hardware.h new file mode 100644 index 000000000000..57e09836f9d7 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/hardware.h @@ -0,0 +1,22 @@ +/* + * This file contains the hardware definitions of the Cavium Networks boards. + * + * Copyright 2003 ARM Limited. + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +#include <asm/sizes.h> + +/* macro to get at IO space when running virtually */ +#define PCIBIOS_MIN_IO 0x00000000 +#define PCIBIOS_MIN_MEM 0x00000000 +#define pcibios_assign_all_busses() 1 + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/io.h b/arch/arm/mach-cns3xxx/include/mach/io.h new file mode 100644 index 000000000000..33b6fc1ece7c --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/io.h @@ -0,0 +1,17 @@ +/* + * Copyright 2008 Cavium Networks + * Copyright 2003 ARM Limited + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ +#ifndef __MACH_IO_H +#define __MACH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/irqs.h b/arch/arm/mach-cns3xxx/include/mach/irqs.h new file mode 100644 index 000000000000..2ab96f8085c8 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/irqs.h @@ -0,0 +1,24 @@ +/* + * Copyright 2000 Deep Blue Solutions Ltd. + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 +#define IRQ_TC11MP_GIC_START 32 + +#include <mach/cns3xxx.h> + +#ifndef NR_IRQS +#error "NR_IRQS not defined by the board-specific files" +#endif + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h new file mode 100644 index 000000000000..3b6b769b7a27 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/memory.h @@ -0,0 +1,26 @@ +/* + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MEMORY_H +#define __MACH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET UL(0x00000000) + +#define __phys_to_bus(x) ((x) + PHYS_OFFSET) +#define __bus_to_phys(x) ((x) - PHYS_OFFSET) + +#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) +#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) +#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) +#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h new file mode 100644 index 000000000000..58bb03ae3cf4 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -0,0 +1,29 @@ +/* + * Copyright 2000 Deep Blue Solutions Ltd + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +#include <linux/io.h> +#include <asm/proc-fns.h> +#include <mach/hardware.h> + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +void arch_reset(char mode, const char *cmd); + +#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/timex.h b/arch/arm/mach-cns3xxx/include/mach/timex.h new file mode 100644 index 000000000000..1fd04217cacb --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/timex.h @@ -0,0 +1,12 @@ +/* + * Cavium Networks architecture timex specifications + * + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h new file mode 100644 index 000000000000..de8ead9b91f7 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -0,0 +1,55 @@ +/* + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <mach/cns3xxx.h> + +#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) +#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) +#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) +#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) + +/* + * Return the UART base address + */ +static inline unsigned long get_uart_base(void) +{ + if (machine_is_cns3420vb()) + return CNS3XXX_UART0_BASE; + else + return 0; +} + +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 5)) + barrier(); + + AMBA_UART_DR(base) = c; +} + +static inline void flush(void) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 3)) + barrier(); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h new file mode 100644 index 000000000000..4d381ec05278 --- /dev/null +++ b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h @@ -0,0 +1,11 @@ +/* + * Copyright 2000 Russell King. + * Copyright 2003 ARM Limited + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#define VMALLOC_END 0xd8000000 diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c new file mode 100644 index 000000000000..725e1a4fc231 --- /dev/null +++ b/arch/arm/mach-cns3xxx/pm.c @@ -0,0 +1,86 @@ +/* + * Copyright 2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <mach/system.h> +#include <mach/cns3xxx.h> + +void cns3xxx_pwr_clk_en(unsigned int block) +{ + PM_CLK_GATE_REG |= (block & PM_CLK_GATE_REG_MASK); +} + +void cns3xxx_pwr_power_up(unsigned int block) +{ + PM_PLL_HM_PD_CTRL_REG &= ~(block & CNS3XXX_PWR_PLL_ALL); + + /* Wait for 300us for the PLL output clock locked. */ + udelay(300); +}; + +void cns3xxx_pwr_power_down(unsigned int block) +{ + /* write '1' to power down */ + PM_PLL_HM_PD_CTRL_REG |= (block & CNS3XXX_PWR_PLL_ALL); +}; + +static void cns3xxx_pwr_soft_rst_force(unsigned int block) +{ + /* + * bit 0, 28, 29 => program low to reset, + * the other else program low and then high + */ + if (block & 0x30000001) { + PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK); + } else { + PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK); + PM_SOFT_RST_REG |= (block & PM_SOFT_RST_REG_MASK); + } +} + +void cns3xxx_pwr_soft_rst(unsigned int block) +{ + static unsigned int soft_reset; + + if (soft_reset & block) { + /* SPI/I2C/GPIO use the same block, reset once. */ + return; + } else { + soft_reset |= block; + } + cns3xxx_pwr_soft_rst_force(block); +} + +void arch_reset(char mode, const char *cmd) +{ + /* + * To reset, we hit the on-board reset register + * in the system FPGA. + */ + cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL)); +} + +/* + * cns3xxx_cpu_clock - return CPU/L2 clock + * aclk: cpu clock/2 + * hclk: cpu clock/4 + * pclk: cpu clock/8 + */ +int cns3xxx_cpu_clock(void) +{ + int cpu; + int cpu_sel; + int div_sel; + + cpu_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf; + div_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3; + + cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel; + + return cpu; +} diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index caf6d5154aec..3a1a855bfdca 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -41,7 +41,7 @@ static struct platform_device adssphere_flash = { .resource = &adssphere_flash_resource, }; -static struct ep93xx_eth_data adssphere_eth_data = { +static struct ep93xx_eth_data __initdata adssphere_eth_data = { .phy_id = 1, }; diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 5f80092b6ace..e29bdef9b2e2 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -96,6 +96,10 @@ static struct clk clk_keypad = { .enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN, .set_rate = set_keytchclk_rate, }; +static struct clk clk_spi = { + .parent = &clk_xtali, + .rate = EP93XX_EXT_CLK_RATE, +}; static struct clk clk_pwm = { .parent = &clk_xtali, .rate = EP93XX_EXT_CLK_RATE, @@ -186,6 +190,7 @@ static struct clk_lookup clocks[] = { INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), INIT_CK("ep93xx-keypad", NULL, &clk_keypad), INIT_CK("ep93xx-fb", NULL, &clk_video), + INIT_CK("ep93xx-spi.0", NULL, &clk_spi), INIT_CK(NULL, "pwm_clk", &clk_pwm), INIT_CK(NULL, "m2p0", &clk_m2p0), INIT_CK(NULL, "m2p1", &clk_m2p1), @@ -473,6 +478,14 @@ static int __init ep93xx_clock_init(void) /* Initialize the pll2 derived clocks */ clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1); + /* + * EP93xx SSP clock rate was doubled in version E2. For more information + * see: + * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf + */ + if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2) + clk_spi.rate /= 2; + pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n", clk_pll1.rate / 1000000, clk_pll2.rate / 1000000); pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n", diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 90fb591cbffa..9092677f63eb 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -31,10 +31,12 @@ #include <linux/amba/serial.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> +#include <linux/spi/spi.h> #include <mach/hardware.h> #include <mach/fb.h> #include <mach/ep93xx_keypad.h> +#include <mach/ep93xx_spi.h> #include <asm/mach/map.h> #include <asm/mach/time.h> @@ -222,6 +224,20 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) } EXPORT_SYMBOL(ep93xx_devcfg_set_clear); +/** + * ep93xx_chip_revision() - returns the EP93xx chip revision + * + * See <mach/platform.h> for more information. + */ +unsigned int ep93xx_chip_revision(void) +{ + unsigned int v; + + v = __raw_readl(EP93XX_SYSCON_SYSCFG); + v &= EP93XX_SYSCON_SYSCFG_REV_MASK; + v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT; + return v; +} /************************************************************************* * EP93xx peripheral handling @@ -330,6 +346,10 @@ static struct platform_device ep93xx_ohci_device = { .resource = ep93xx_ohci_resources, }; + +/************************************************************************* + * EP93xx ethernet peripheral handling + *************************************************************************/ static struct ep93xx_eth_data ep93xx_eth_data; static struct resource ep93xx_eth_resource[] = { @@ -354,6 +374,12 @@ static struct platform_device ep93xx_eth_device = { .resource = ep93xx_eth_resource, }; +/** + * ep93xx_register_eth - Register the built-in ethernet platform device. + * @data: platform specific ethernet configuration (__initdata) + * @copy_addr: flag indicating that the MAC address should be copied + * from the IndAd registers (as programmed by the bootloader) + */ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) { if (copy_addr) @@ -370,11 +396,19 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) static struct i2c_gpio_platform_data ep93xx_i2c_data; static struct platform_device ep93xx_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &ep93xx_i2c_data, + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ep93xx_i2c_data, + }, }; +/** + * ep93xx_register_i2c - Register the i2c platform device. + * @data: platform specific i2c-gpio configuration (__initdata) + * @devices: platform specific i2c bus device information (__initdata) + * @num: the number of devices on the i2c bus + */ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, struct i2c_board_info *devices, int num) { @@ -398,17 +432,67 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, platform_device_register(&ep93xx_i2c_device); } +/************************************************************************* + * EP93xx SPI peripheral handling + *************************************************************************/ +static struct ep93xx_spi_info ep93xx_spi_master_data; + +static struct resource ep93xx_spi_resources[] = { + { + .start = EP93XX_SPI_PHYS_BASE, + .end = EP93XX_SPI_PHYS_BASE + 0x18 - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EP93XX_SSP, + .end = IRQ_EP93XX_SSP, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ep93xx_spi_device = { + .name = "ep93xx-spi", + .id = 0, + .dev = { + .platform_data = &ep93xx_spi_master_data, + }, + .num_resources = ARRAY_SIZE(ep93xx_spi_resources), + .resource = ep93xx_spi_resources, +}; + +/** + * ep93xx_register_spi() - registers spi platform device + * @info: ep93xx board specific spi master info (__initdata) + * @devices: SPI devices to register (__initdata) + * @num: number of SPI devices to register + * + * This function registers platform device for the EP93xx SPI controller and + * also makes sure that SPI pins are muxed so that I2S is not using those pins. + */ +void __init ep93xx_register_spi(struct ep93xx_spi_info *info, + struct spi_board_info *devices, int num) +{ + /* + * When SPI is used, we need to make sure that I2S is muxed off from + * SPI pins. + */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP); + + ep93xx_spi_master_data = *info; + spi_register_board_info(devices, num); + platform_device_register(&ep93xx_spi_device); +} /************************************************************************* * EP93xx LEDs *************************************************************************/ static struct gpio_led ep93xx_led_pins[] = { { - .name = "platform:grled", - .gpio = EP93XX_GPIO_LINE_GRLED, + .name = "platform:grled", + .gpio = EP93XX_GPIO_LINE_GRLED, }, { - .name = "platform:rdled", - .gpio = EP93XX_GPIO_LINE_RDLED, + .name = "platform:rdled", + .gpio = EP93XX_GPIO_LINE_RDLED, }, }; @@ -528,7 +612,7 @@ static struct platform_device ep93xx_fb_device = { .name = "ep93xx-fb", .id = -1, .dev = { - .platform_data = &ep93xxfb_data, + .platform_data = &ep93xxfb_data, .coherent_dma_mask = DMA_BIT_MASK(32), .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask, }, @@ -536,6 +620,10 @@ static struct platform_device ep93xx_fb_device = { .resource = ep93xx_fb_resource, }; +/** + * ep93xx_register_fb - Register the framebuffer platform device. + * @data: platform specific framebuffer configuration (__initdata) + */ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) { ep93xxfb_data = *data; @@ -546,6 +634,8 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) /************************************************************************* * EP93xx matrix keypad peripheral handling *************************************************************************/ +static struct ep93xx_keypad_platform_data ep93xx_keypad_data; + static struct resource ep93xx_keypad_resource[] = { { .start = EP93XX_KEY_MATRIX_PHYS_BASE, @@ -559,15 +649,22 @@ static struct resource ep93xx_keypad_resource[] = { }; static struct platform_device ep93xx_keypad_device = { - .name = "ep93xx-keypad", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_keypad_resource), - .resource = ep93xx_keypad_resource, + .name = "ep93xx-keypad", + .id = -1, + .dev = { + .platform_data = &ep93xx_keypad_data, + }, + .num_resources = ARRAY_SIZE(ep93xx_keypad_resource), + .resource = ep93xx_keypad_resource, }; +/** + * ep93xx_register_keypad - Register the keypad platform device. + * @data: platform specific keypad configuration (__initdata) + */ void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data) { - ep93xx_keypad_device.dev.platform_data = data; + ep93xx_keypad_data = *data; platform_device_register(&ep93xx_keypad_device); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index d22d67ac8b99..3884182cd362 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -74,7 +74,7 @@ static void __init edb93xx_register_flash(void) } } -static struct ep93xx_eth_data edb93xx_eth_data = { +static struct ep93xx_eth_data __initdata edb93xx_eth_data = { .phy_id = 1, }; @@ -82,7 +82,7 @@ static struct ep93xx_eth_data edb93xx_eth_data = { /************************************************************************* * EDB93xx i2c peripheral handling *************************************************************************/ -static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = { +static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = { .sda_pin = EP93XX_GPIO_LINE_EEDAT, .sda_is_open_drain = 0, .scl_pin = EP93XX_GPIO_LINE_EECLK, diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index 3da7ca816d19..a809618e9f05 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -41,7 +41,7 @@ static struct platform_device gesbc9312_flash = { .resource = &gesbc9312_flash_resource, }; -static struct ep93xx_eth_data gesbc9312_eth_data = { +static struct ep93xx_eth_data __initdata gesbc9312_eth_data = { .phy_id = 1, }; diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 93e2ecc79ceb..b1e096f0c2d2 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -106,6 +106,7 @@ #define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) +#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) #define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) #define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index c6dc14dbca18..9a4413dd44bb 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -6,9 +6,11 @@ struct i2c_gpio_platform_data; struct i2c_board_info; +struct spi_board_info; struct platform_device; struct ep93xxfb_mach_info; struct ep93xx_keypad_platform_data; +struct ep93xx_spi_info; struct ep93xx_eth_data { @@ -33,9 +35,19 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits) ep93xx_devcfg_set_clear(0x00, bits); } +#define EP93XX_CHIP_REV_D0 3 +#define EP93XX_CHIP_REV_D1 4 +#define EP93XX_CHIP_REV_E0 5 +#define EP93XX_CHIP_REV_E1 6 +#define EP93XX_CHIP_REV_E2 7 + +unsigned int ep93xx_chip_revision(void); + void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); void ep93xx_register_i2c(struct i2c_gpio_platform_data *data, struct i2c_board_info *devices, int num); +void ep93xx_register_spi(struct ep93xx_spi_info *info, + struct spi_board_info *devices, int num); void ep93xx_register_fb(struct ep93xxfb_mach_info *data); void ep93xx_register_pwm(int pwm0, int pwm1); int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index c33360e82868..1cc911b4efa6 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -80,7 +80,7 @@ static void __init micro9_register_flash(void) /************************************************************************* * Micro9 Ethernet *************************************************************************/ -static struct ep93xx_eth_data micro9_eth_data = { +static struct ep93xx_eth_data __initdata micro9_eth_data = { .phy_id = 0x1f, }; diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index cd93990f1b99..388aec95f60e 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -49,17 +49,17 @@ static struct platform_device simone_flash = { }, }; -static struct ep93xx_eth_data simone_eth_data = { +static struct ep93xx_eth_data __initdata simone_eth_data = { .phy_id = 1, }; -static struct ep93xxfb_mach_info simone_fb_info = { +static struct ep93xxfb_mach_info __initdata simone_fb_info = { .num_modes = EP93XXFB_USE_MODEDB, .bpp = 16, .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, }; -static struct i2c_gpio_platform_data simone_i2c_gpio_data = { +static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = { .sda_pin = EP93XX_GPIO_LINE_EEDAT, .sda_is_open_drain = 0, .scl_pin = EP93XX_GPIO_LINE_EECLK, diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 51134b0382ca..38deaee40397 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -125,11 +125,11 @@ static struct platform_device snappercl15_nand_device = { .num_resources = ARRAY_SIZE(snappercl15_nand_resource), }; -static struct ep93xx_eth_data snappercl15_eth_data = { +static struct ep93xx_eth_data __initdata snappercl15_eth_data = { .phy_id = 1, }; -static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = { +static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = { .sda_pin = EP93XX_GPIO_LINE_EEDAT, .sda_is_open_drain = 0, .scl_pin = EP93XX_GPIO_LINE_EECLK, @@ -145,7 +145,7 @@ static struct i2c_board_info __initdata snappercl15_i2c_data[] = { }, }; -static struct ep93xxfb_mach_info snappercl15_fb_info = { +static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = { .num_modes = EP93XXFB_USE_MODEDB, .bpp = 16, }; diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index fac1ec7a60fb..9553031900b0 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -186,7 +186,7 @@ static struct platform_device ts72xx_wdt_device = { .resource = ts72xx_wdt_resources, }; -static struct ep93xx_eth_data ts72xx_eth_data = { +static struct ep93xx_eth_data __initdata ts72xx_eth_data = { .phy_id = 1, }; diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index df97d16390e3..27db275b367c 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -11,6 +11,7 @@ config ARCH_INTEGRATOR_AP config ARCH_INTEGRATOR_CP bool "Support Integrator/CP platform" select ARCH_CINTEGRATOR + select ARM_TIMER_SP804 help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index 6a5ef8d30b10..ebeef966e1f5 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := clock.o core.o lm.o +obj-y := core.o lm.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h deleted file mode 100644 index 609c49de3d47..000000000000 --- a/arch/arm/mach-integrator/common.h +++ /dev/null @@ -1,2 +0,0 @@ -extern void integrator_time_init(unsigned long, unsigned int); -extern unsigned long integrator_gettimeoffset(void); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 8b390e36ba69..b02cfc06e0ae 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -24,15 +24,13 @@ #include <asm/clkdev.h> #include <mach/clkdev.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/irq.h> -#include <asm/hardware/arm_timer.h> #include <mach/cm.h> #include <asm/system.h> #include <asm/leds.h> #include <asm/mach/time.h> -#include "common.h" - static struct amba_pl010_data integrator_uart_data; static struct amba_device rtc_device = { @@ -163,8 +161,8 @@ arch_initcall(integrator_init); * UART0 7 6 * UART1 5 4 */ -#define SC_CTRLC (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET) -#define SC_CTRLS (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET) +#define SC_CTRLC IO_ADDRESS(INTEGRATOR_SC_CTRLC) +#define SC_CTRLS IO_ADDRESS(INTEGRATOR_SC_CTRLS) static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) { @@ -196,7 +194,7 @@ static struct amba_pl010_data integrator_uart_data = { .set_mctrl = integrator_uart_set_mctrl, }; -#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET +#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) static DEFINE_SPINLOCK(cm_lock); @@ -217,120 +215,3 @@ void cm_control(u32 mask, u32 set) } EXPORT_SYMBOL(cm_control); - -/* - * Where is the timer (VA)? - */ -#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000) -#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100) -#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200) -#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) - -/* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - -static unsigned long timer_reload; - -/* - * Returns number of ms since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - */ -unsigned long integrator_gettimeoffset(void) -{ - unsigned long ticks1, ticks2, status; - - /* - * Get the current number of ticks. Note that there is a race - * condition between us reading the timer and checking for - * an interrupt. We get around this by ensuring that the - * counter has not reloaded between our two reads. - */ - ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; - do { - ticks1 = ticks2; - status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS); - ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; - } while (ticks2 > ticks1); - - /* - * Number of ticks since last interrupt. - */ - ticks1 = timer_reload - ticks2; - - /* - * Interrupt pending? If so, we've reloaded once already. - */ - if (status & (1 << IRQ_TIMERINT1)) - ticks1 += timer_reload; - - /* - * Convert the ticks to usecs - */ - return TICKS2USECS(ticks1); -} - -/* - * IRQ handler for the timer - */ -static irqreturn_t -integrator_timer_interrupt(int irq, void *dev_id) -{ - /* - * clear the interrupt - */ - writel(1, TIMER1_VA_BASE + TIMER_INTCLR); - - timer_tick(); - - return IRQ_HANDLED; -} - -static struct irqaction integrator_timer_irq = { - .name = "Integrator Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = integrator_timer_interrupt, -}; - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -void __init integrator_time_init(unsigned long reload, unsigned int ctrl) -{ - unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; - - timer_reload = reload; - timer_ctrl |= ctrl; - - if (timer_reload > 0x100000) { - timer_reload >>= 8; - timer_ctrl |= TIMER_CTRL_DIV256; - } else if (timer_reload > 0x010000) { - timer_reload >>= 4; - timer_ctrl |= TIMER_CTRL_DIV16; - } - - /* - * Initialise to a known state (all timers off) - */ - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - - writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD); - writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE); - writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL); - - /* - * Make irqs happen for the system timer - */ - setup_irq(IRQ_TIMERINT1, &integrator_timer_irq); -} diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c index f77f20255045..a3fbcb3adc29 100644 --- a/arch/arm/mach-integrator/cpu.c +++ b/arch/arm/mach-integrator/cpu.c @@ -19,32 +19,39 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/mach-types.h> -#include <asm/hardware/icst525.h> +#include <asm/hardware/icst.h> static struct cpufreq_driver integrator_driver; -#define CM_ID (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_ID_OFFSET) -#define CM_OSC (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_OSC_OFFSET) -#define CM_STAT (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_STAT_OFFSET) -#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) +#define CM_ID IO_ADDRESS(INTEGRATOR_HDR_ID) +#define CM_OSC IO_ADDRESS(INTEGRATOR_HDR_OSC) +#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT) +#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK) -static const struct icst525_params lclk_params = { - .ref = 24000, - .vco_max = 320000, +static const struct icst_params lclk_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, .vd_min = 8, .vd_max = 132, .rd_min = 24, .rd_max = 24, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; -static const struct icst525_params cclk_params = { - .ref = 24000, - .vco_max = 320000, +static const struct icst_params cclk_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, .vd_min = 12, .vd_max = 160, .rd_min = 24, .rd_max = 24, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; /* @@ -52,17 +59,17 @@ static const struct icst525_params cclk_params = { */ static int integrator_verify_policy(struct cpufreq_policy *policy) { - struct icst525_vco vco; + struct icst_vco vco; cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - vco = icst525_khz_to_vco(&cclk_params, policy->max); - policy->max = icst525_khz(&cclk_params, vco); + vco = icst_hz_to_vco(&cclk_params, policy->max * 1000); + policy->max = icst_hz(&cclk_params, vco) / 1000; - vco = icst525_khz_to_vco(&cclk_params, policy->min); - policy->min = icst525_khz(&cclk_params, vco); + vco = icst_hz_to_vco(&cclk_params, policy->min * 1000); + policy->min = icst_hz(&cclk_params, vco) / 1000; cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, @@ -78,7 +85,7 @@ static int integrator_set_target(struct cpufreq_policy *policy, { cpumask_t cpus_allowed; int cpu = policy->cpu; - struct icst525_vco vco; + struct icst_vco vco; struct cpufreq_freqs freqs; u_int cm_osc; @@ -104,17 +111,17 @@ static int integrator_set_target(struct cpufreq_policy *policy, } vco.v = cm_osc & 255; vco.r = 22; - freqs.old = icst525_khz(&cclk_params, vco); + freqs.old = icst_hz(&cclk_params, vco) / 1000; - /* icst525_khz_to_vco rounds down -- so we need the next + /* icst_hz_to_vco rounds down -- so we need the next * larger freq in case of CPUFREQ_RELATION_L. */ if (relation == CPUFREQ_RELATION_L) target_freq += 999; if (target_freq > policy->max) target_freq = policy->max; - vco = icst525_khz_to_vco(&cclk_params, target_freq); - freqs.new = icst525_khz(&cclk_params, vco); + vco = icst_hz_to_vco(&cclk_params, target_freq * 1000); + freqs.new = icst_hz(&cclk_params, vco) / 1000; freqs.cpu = policy->cpu; @@ -154,7 +161,7 @@ static unsigned int integrator_get(unsigned int cpu) cpumask_t cpus_allowed; unsigned int current_freq; u_int cm_osc; - struct icst525_vco vco; + struct icst_vco vco; cpus_allowed = current->cpus_allowed; @@ -172,7 +179,7 @@ static unsigned int integrator_get(unsigned int cpu) vco.v = cm_osc & 255; vco.r = 22; - current_freq = icst525_khz(&cclk_params, vco); /* current freq */ + current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */ set_cpus_allowed(current, cpus_allowed); diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 41b10725cef7..fd684bf205e5 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -25,7 +25,7 @@ #include <asm/clkdev.h> #include <mach/clkdev.h> -#include <asm/hardware/icst525.h> +#include <asm/hardware/icst.h> #include <mach/lm.h> #include <mach/impd1.h> #include <asm/sizes.h> @@ -41,32 +41,25 @@ struct impd1_module { struct clk_lookup *clks[3]; }; -static const struct icst525_params impd1_vco_params = { - .ref = 24000, /* 24 MHz */ - .vco_max = 200000, /* 200 MHz */ +static const struct icst_params impd1_vco_params = { + .ref = 24000000, /* 24 MHz */ + .vco_max = ICST525_VCO_MAX_3V, + .vco_min = ICST525_VCO_MIN, .vd_min = 12, .vd_max = 519, .rd_min = 3, .rd_max = 120, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; -static void impd1_setvco(struct clk *clk, struct icst525_vco vco) +static void impd1_setvco(struct clk *clk, struct icst_vco vco) { struct impd1_module *impd1 = clk->data; - int vconr = clk - impd1->vcos; - u32 val; - - val = vco.v | (vco.r << 9) | (vco.s << 16); + u32 val = vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, impd1->base + IMPD1_LOCK); - switch (vconr) { - case 0: - writel(val, impd1->base + IMPD1_OSC1); - break; - case 1: - writel(val, impd1->base + IMPD1_OSC2); - break; - } + writel(val, clk->vcoreg); writel(0, impd1->base + IMPD1_LOCK); #ifdef DEBUG @@ -74,11 +67,17 @@ static void impd1_setvco(struct clk *clk, struct icst525_vco vco) vco.r = (val >> 9) & 0x7f; vco.s = (val >> 16) & 7; - pr_debug("IM-PD1: VCO%d clock is %ld kHz\n", - vconr, icst525_khz(&impd1_vco_params, vco)); + pr_debug("IM-PD1: VCO%d clock is %ld Hz\n", + vconr, icst525_hz(&impd1_vco_params, vco)); #endif } +static const struct clk_ops impd1_clk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = impd1_setvco, +}; + void impd1_tweak_control(struct device *dev, u32 mask, u32 val) { struct impd1_module *impd1 = dev_get_drvdata(dev); @@ -374,11 +373,13 @@ static int impd1_probe(struct lm_device *dev) (unsigned long)dev->resource.start); for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) { + impd1->vcos[i].ops = &impd1_clk_ops, impd1->vcos[i].owner = THIS_MODULE, impd1->vcos[i].params = &impd1_vco_params, - impd1->vcos[i].data = impd1, - impd1->vcos[i].setvco = impd1_setvco; + impd1->vcos[i].data = impd1; } + impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1; + impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2; impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000", dev->id); diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h index 9293e410832a..bfe07679faec 100644 --- a/arch/arm/mach-integrator/include/mach/clkdev.h +++ b/arch/arm/mach-integrator/include/mach/clkdev.h @@ -2,14 +2,15 @@ #define __ASM_MACH_CLKDEV_H #include <linux/module.h> -#include <asm/hardware/icst525.h> +#include <plat/clock.h> struct clk { unsigned long rate; + const struct clk_ops *ops; struct module *owner; - const struct icst525_params *params; + const struct icst_params *params; + void __iomem *vcoreg; void *data; - void (*setvco)(struct clk *, struct icst525_vco vco); }; static inline int __clk_get(struct clk *clk) diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S index 7649c57acb53..3d029c9f3ef6 100644 --- a/arch/arm/mach-integrator/include/mach/entry-macro.S +++ b/arch/arm/mach-integrator/include/mach/entry-macro.S @@ -8,6 +8,7 @@ * warranty of any kind, whether express or implied. */ #include <mach/hardware.h> +#include <mach/platform.h> #include <mach/irqs.h> .macro disable_fiq diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h index d795642fad22..8e26360ce9a3 100644 --- a/arch/arm/mach-integrator/include/mach/hardware.h +++ b/arch/arm/mach-integrator/include/mach/hardware.h @@ -23,7 +23,6 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <mach/platform.h> /* * Where in virtual memory the IO devices (timers, system controllers @@ -36,17 +35,19 @@ #define PCIO_BASE PCI_IO_VADDR #define PCIMEM_BASE PCI_MEMORY_VADDR -#ifdef CONFIG_MMU -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) -#else -#define IO_ADDRESS(x) (x) -#endif - #define pcibios_assign_all_busses() 1 #define PCIBIOS_MIN_IO 0x6000 #define PCIBIOS_MIN_MEM 0x00100000 +/* macro to get at IO space when running virtually */ +#ifdef CONFIG_MMU +#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) +#else +#define IO_ADDRESS(x) (x) +#endif + +#define __io_address(n) ((void __iomem *)IO_ADDRESS(n)) + #endif diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index e00a2624f269..5e6ea5cfea6e 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -23,9 +23,6 @@ * * Integrator address map * - * NOTE: This is a multi-hosted header file for use with uHAL and - * supported debuggers. - * * ***********************************************************************/ #ifndef __address_h @@ -290,12 +287,14 @@ #define INTEGRATOR_DBG_LEDS (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET) #define INTEGRATOR_DBG_SWITCH (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET) +#define INTEGRATOR_AP_GPIO_BASE 0x1B000000 /* GPIO */ -#if defined(CONFIG_ARCH_INTEGRATOR_AP) -#define INTEGRATOR_GPIO_BASE 0x1B000000 /* GPIO */ -#elif defined(CONFIG_ARCH_INTEGRATOR_CP) -#define INTEGRATOR_GPIO_BASE 0xC9000000 /* GPIO */ -#endif +#define INTEGRATOR_CP_MMC_BASE 0x1C000000 /* MMC */ +#define INTEGRATOR_CP_AACI_BASE 0x1D000000 /* AACI */ +#define INTEGRATOR_CP_ETH_BASE 0xC8000000 /* Ethernet */ +#define INTEGRATOR_CP_GPIO_BASE 0xC9000000 /* GPIO */ +#define INTEGRATOR_CP_SIC_BASE 0xCA000000 /* SIC */ +#define INTEGRATOR_CP_CTL_BASE 0xCB000000 /* CP system control */ /* ------------------------------------------------------------------------ * KMI keyboard/mouse definitions @@ -328,20 +327,6 @@ */ #define PHYS_PCI_V3_BASE 0x62000000 -#define PCI_DRAMSIZE INTEGRATOR_SSRAM_SIZE - -/* 'export' these to UHAL */ -#define UHAL_PCI_IO PCI_IO_BASE -#define UHAL_PCI_MEM PCI_MEM_BASE -#define UHAL_PCI_ALLOC_IO_BASE 0x00004000 -#define UHAL_PCI_ALLOC_MEM_BASE PCI_MEM_BASE -#define UHAL_PCI_MAX_SLOT 20 - -/* ======================================================================== - * Start of uHAL definitions - * ======================================================================== - */ - /* ------------------------------------------------------------------------ * Integrator Interrupt Controllers * ------------------------------------------------------------------------ @@ -389,7 +374,7 @@ */ /* ------------------------------------------------------------------------ - * LED's - The header LED is not accessible via the uHAL API + * LED's * ------------------------------------------------------------------------ * */ @@ -402,34 +387,18 @@ #define LED_BANK INTEGRATOR_DBG_LEDS /* - * Memory definitions - run uHAL out of SSRAM. - * - */ -#define uHAL_MEMORY_SIZE INTEGRATOR_SSRAM_SIZE - -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE INTEGRATOR_BOOT_ROM_HI - -/* * Timer definitions * * Only use timer 1 & 2 * (both run at 24MHz and will need the clock divider set to 16). * - * Timer 0 runs at bus frequency and therefore could vary and currently - * uHAL can't handle that. - * + * Timer 0 runs at bus frequency */ #define INTEGRATOR_TIMER0_BASE INTEGRATOR_CT_BASE #define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100) #define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200) -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 #define TICKS_PER_uSEC 24 /* @@ -437,14 +406,9 @@ * */ #define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) #define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) #define INTEGRATOR_CSR_BASE 0x10000000 #define INTEGRATOR_CSR_SIZE 0x10000000 #endif - -/* END */ diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 8138a7e24562..227cf4d05088 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -27,9 +27,14 @@ #include <linux/sysdev.h> #include <linux/amba/bus.h> #include <linux/amba/kmi.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> +#include <asm/hardware/arm_timer.h> #include <asm/irq.h> #include <asm/setup.h> #include <asm/param.h> /* HZ */ @@ -43,8 +48,6 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include "common.h" - /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx * is the (PA >> 12). @@ -55,7 +58,7 @@ #define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) #define VA_SC_BASE IO_ADDRESS(INTEGRATOR_SC_BASE) #define VA_EBI_BASE IO_ADDRESS(INTEGRATOR_EBI_BASE) -#define VA_CMIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_IC_OFFSET +#define VA_CMIC_BASE IO_ADDRESS(INTEGRATOR_HDR_IC) /* * Logical Physical @@ -117,8 +120,8 @@ static struct map_desc ap_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE), + .virtual = IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE), .length = SZ_4K, .type = MT_DEVICE }, { @@ -334,14 +337,163 @@ static void __init ap_init(void) } } +/* + * Where is the timer (VA)? + */ +#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE) +#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE) +#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE) + +/* + * How long is the timer interval? + */ +#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) +#if TIMER_INTERVAL >= 0x100000 +#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) +#elif TIMER_INTERVAL >= 0x10000 +#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) +#else +#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) +#endif + +static unsigned long timer_reload; + +static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE; + +static cycle_t timersp_read(struct clocksource *cs) +{ + return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff); +} + +static struct clocksource clocksource_timersp = { + .name = "timer2", + .rating = 200, + .read = timersp_read, + .mask = CLOCKSOURCE_MASK(16), + .shift = 16, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void integrator_clocksource_init(u32 khz) +{ + struct clocksource *cs = &clocksource_timersp; + void __iomem *base = clksrc_base; + u32 ctrl = TIMER_CTRL_ENABLE; + + if (khz >= 1500) { + khz /= 16; + ctrl = TIMER_CTRL_DIV16; + } + + writel(ctrl, base + TIMER_CTRL); + writel(0xffff, base + TIMER_LOAD); + + cs->mult = clocksource_khz2mult(khz, cs->shift); + clocksource_register(cs); +} + +static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE; + +/* + * IRQ handler for the timer + */ +static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* clear the interrupt */ + writel(1, clkevt_base + TIMER_INTCLR); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) +{ + u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; + + BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT); + + if (mode == CLOCK_EVT_MODE_PERIODIC) { + writel(ctrl, clkevt_base + TIMER_CTRL); + writel(timer_reload, clkevt_base + TIMER_LOAD); + ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; + } + + writel(ctrl, clkevt_base + TIMER_CTRL); +} + +static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt) +{ + unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); + + writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + writel(next, clkevt_base + TIMER_LOAD); + writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + + return 0; +} + +static struct clock_event_device integrator_clockevent = { + .name = "timer1", + .shift = 34, + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = clkevt_set_mode, + .set_next_event = clkevt_set_next_event, + .rating = 300, + .cpumask = cpu_all_mask, +}; + +static struct irqaction integrator_timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = integrator_timer_interrupt, + .dev_id = &integrator_clockevent, +}; + +static void integrator_clockevent_init(u32 khz) +{ + struct clock_event_device *evt = &integrator_clockevent; + unsigned int ctrl = 0; + + if (khz * 1000 > 0x100000 * HZ) { + khz /= 256; + ctrl |= TIMER_CTRL_DIV256; + } else if (khz * 1000 > 0x10000 * HZ) { + khz /= 16; + ctrl |= TIMER_CTRL_DIV16; + } + + timer_reload = khz * 1000 / HZ; + writel(ctrl, clkevt_base + TIMER_CTRL); + + evt->irq = IRQ_TIMERINT1; + evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift); + evt->max_delta_ns = clockevent_delta2ns(0xffff, evt); + evt->min_delta_ns = clockevent_delta2ns(0xf, evt); + + setup_irq(IRQ_TIMERINT1, &integrator_timer_irq); + clockevents_register_device(evt); +} + +/* + * Set up timer(s). + */ static void __init ap_init_timer(void) { - integrator_time_init(1000000 * TICKS_PER_uSEC / HZ, 0); + u32 khz = TICKS_PER_uSEC * 1000; + + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + + integrator_clocksource_init(khz); + integrator_clockevent_init(khz); } static struct sys_timer ap_timer = { .init = ap_init_timer, - .offset = integrator_gettimeoffset, }; MACHINE_START(INTEGRATOR, "ARM-Integrator") diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 15e6cc5a352f..cde57b2b83b5 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -25,10 +25,12 @@ #include <asm/clkdev.h> #include <mach/clkdev.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/irq.h> #include <asm/setup.h> #include <asm/mach-types.h> -#include <asm/hardware/icst525.h> +#include <asm/hardware/arm_timer.h> +#include <asm/hardware/icst.h> #include <mach/cm.h> #include <mach/lm.h> @@ -39,24 +41,20 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include "common.h" - -#define INTCP_PA_MMC_BASE 0x1c000000 -#define INTCP_PA_AACI_BASE 0x1d000000 +#include <plat/timer-sp.h> #define INTCP_PA_FLASH_BASE 0x24000000 #define INTCP_FLASH_SIZE SZ_32M #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40 +#define INTCP_VA_CIC_BASE IO_ADDRESS(INTEGRATOR_HDR_BASE + 0x40) #define INTCP_VA_PIC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) -#define INTCP_VA_SIC_BASE IO_ADDRESS(0xca000000) +#define INTCP_VA_SIC_BASE IO_ADDRESS(INTEGRATOR_CP_SIC_BASE) -#define INTCP_PA_ETH_BASE 0xc8000000 #define INTCP_ETH_SIZE 0x10 -#define INTCP_VA_CTRL_BASE IO_ADDRESS(0xcb000000) +#define INTCP_VA_CTRL_BASE IO_ADDRESS(INTEGRATOR_CP_CTL_BASE) #define INTCP_FLASHPROG 0x04 #define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0) #define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1) @@ -71,7 +69,9 @@ * f1600000 16000000 UART 0 * f1700000 17000000 UART 1 * f1a00000 1a000000 Debug LEDs - * f1b00000 1b000000 GPIO + * fc900000 c9000000 GPIO + * fca00000 ca000000 SIC + * fcb00000 cb000000 CP system control */ static struct map_desc intcp_io_desc[] __initdata = { @@ -116,18 +116,18 @@ static struct map_desc intcp_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE), + .virtual = IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE), .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(0xca000000), - .pfn = __phys_to_pfn(0xca000000), + .virtual = IO_ADDRESS(INTEGRATOR_CP_SIC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE), .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(0xcb000000), - .pfn = __phys_to_pfn(0xcb000000), + .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), .length = SZ_4K, .type = MT_DEVICE } @@ -266,33 +266,43 @@ static void __init intcp_init_irq(void) /* * Clock handling */ -#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) -#define CM_AUXOSC (IO_ADDRESS(INTEGRATOR_HDR_BASE)+0x1c) +#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) +#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c) -static const struct icst525_params cp_auxvco_params = { - .ref = 24000, - .vco_max = 320000, +static const struct icst_params cp_auxvco_params = { + .ref = 24000000, + .vco_max = ICST525_VCO_MAX_5V, + .vco_min = ICST525_VCO_MIN, .vd_min = 8, .vd_max = 263, .rd_min = 3, .rd_max = 65, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, }; -static void cp_auxvco_set(struct clk *clk, struct icst525_vco vco) +static void cp_auxvco_set(struct clk *clk, struct icst_vco vco) { u32 val; - val = readl(CM_AUXOSC) & ~0x7ffff; + val = readl(clk->vcoreg) & ~0x7ffff; val |= vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, CM_LOCK); - writel(val, CM_AUXOSC); + writel(val, clk->vcoreg); writel(0, CM_LOCK); } +static const struct clk_ops cp_auxclk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = cp_auxvco_set, +}; + static struct clk cp_auxclk = { + .ops = &cp_auxclk_ops, .params = &cp_auxvco_params, - .setvco = cp_auxvco_set, + .vcoreg = CM_AUXOSC, }; static struct clk_lookup cp_lookups[] = { @@ -363,8 +373,8 @@ static struct platform_device intcp_flash_device = { static struct resource smc91x_resources[] = { [0] = { - .start = INTCP_PA_ETH_BASE, - .end = INTCP_PA_ETH_BASE + INTCP_ETH_SIZE - 1, + .start = INTEGRATOR_CP_ETH_BASE, + .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -394,8 +404,8 @@ static struct platform_device *intcp_devs[] __initdata = { */ static unsigned int mmc_status(struct device *dev) { - unsigned int status = readl(IO_ADDRESS(0xca000000) + 4); - writel(8, IO_ADDRESS(0xcb000000) + 8); + unsigned int status = readl(IO_ADDRESS(0xca000000 + 4)); + writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8)); return status & 8; } @@ -413,8 +423,8 @@ static struct amba_device mmc_device = { .platform_data = &mmc_data, }, .res = { - .start = INTCP_PA_MMC_BASE, - .end = INTCP_PA_MMC_BASE + SZ_4K - 1, + .start = INTEGRATOR_CP_MMC_BASE, + .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }, @@ -426,8 +436,8 @@ static struct amba_device aaci_device = { .init_name = "mb:1d", }, .res = { - .start = INTCP_PA_AACI_BASE, - .end = INTCP_PA_AACI_BASE + SZ_4K - 1, + .start = INTEGRATOR_CP_AACI_BASE, + .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, .irq = { IRQ_CP_AACIINT, NO_IRQ }, @@ -567,16 +577,22 @@ static void __init intcp_init(void) } } -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */ +#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) +#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE) +#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE) static void __init intcp_timer_init(void) { - integrator_time_init(1000000 / HZ, TIMER_CTRL_IE); + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + + sp804_clocksource_init(TIMER2_VA_BASE); + sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1); } static struct sys_timer cp_timer = { .init = intcp_timer_init, - .offset = integrator_gettimeoffset, }; MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c index 8dcc823f4135..28be186adb89 100644 --- a/arch/arm/mach-integrator/leds.c +++ b/arch/arm/mach-integrator/leds.c @@ -27,6 +27,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/leds.h> #include <asm/system.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index ffbd349363af..9cef0590d5aa 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -29,6 +29,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/irq.h> #include <asm/signal.h> #include <asm/system.h> @@ -389,9 +390,9 @@ static int __init pci_v3_setup_resources(struct resource **resource) * means I can't get additional information on the reason for the pm2fb * problems. I suppose I'll just have to mind-meld with the machine. ;) */ -#define SC_PCI (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_PCIENABLE_OFFSET) -#define SC_LBFADDR (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x20) -#define SC_LBFCODE (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x24) +#define SC_PCI IO_ADDRESS(INTEGRATOR_SC_PCIENABLE) +#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20) +#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24) static int v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 5d99039286eb..f108a31afc2b 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -176,7 +176,7 @@ static struct plat_serial8250_port n2100_serial_port[] = { .mapbase = N2100_UART, .membase = (char *)N2100_UART, .irq = 0, - .flags = UPF_SKIP_TEST, + .flags = UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ, .iotype = UPIO_MEM, .regshift = 0, .uartclk = 1843200, diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 71728d36d501..0bce09799d18 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -21,7 +21,6 @@ #include <linux/tty.h> #include <linux/platform_device.h> #include <linux/serial_core.h> -#include <linux/bootmem.h> #include <linux/interrupt.h> #include <linux/bitops.h> #include <linux/time.h> diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 17879a876be6..29b2163b1fe3 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -38,6 +38,12 @@ config MACH_ESATA_SHEEVAPLUG Say 'Y' here if you want your kernel to support the Marvell eSATA SheevaPlug Reference Board. +config MACH_GURUPLUG + bool "Marvell GuruPlug Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell GuruPlug Reference Board. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS" help @@ -81,6 +87,18 @@ config MACH_INETSPACE_V2 Say 'Y' here if you want your kernel to support the LaCie Internet Space v2 NAS. +config MACH_NET2BIG_V2 + bool "LaCie 2Big Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie 2Big Network v2 NAS. + +config MACH_NET5BIG_V2 + bool "LaCie 5Big Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie 5Big Network v2 NAS. + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index a5530e36ba3e..c0cd5d362002 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -6,10 +6,13 @@ obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o +obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o +obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o +obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c new file mode 100644 index 000000000000..54d07c89d4ff --- /dev/null +++ b/arch/arm/mach-kirkwood/guruplug-setup.c @@ -0,0 +1,131 @@ +/* + * arch/arm/mach-kirkwood/guruplug-setup.c + * + * Marvell GuruPlug Reference Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mtd_partition guruplug_nand_parts[] = { + { + .name = "u-boot", + .offset = 0, + .size = SZ_1M + }, { + .name = "uImage", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M + }, { + .name = "root", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + }, +}; + +static struct mv643xx_eth_platform_data guruplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data guruplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data guruplug_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data guruplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led guruplug_led_pins[] = { + { + .name = "guruplug:red:health", + .gpio = 46, + .active_low = 1, + }, + { + .name = "guruplug:green:health", + .gpio = 47, + .active_low = 1, + }, + { + .name = "guruplug:red:wmode", + .gpio = 48, + .active_low = 1, + }, + { + .name = "guruplug:green:wmode", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data guruplug_led_data = { + .leds = guruplug_led_pins, + .num_leds = ARRAY_SIZE(guruplug_led_pins), +}; + +static struct platform_device guruplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &guruplug_led_data, + } +}; + +static unsigned int guruplug_mpp_config[] __initdata = { + MPP46_GPIO, /* M_RLED */ + MPP47_GPIO, /* M_GLED */ + MPP48_GPIO, /* B_RLED */ + MPP49_GPIO, /* B_GLED */ + 0 +}; + +static void __init guruplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(guruplug_mpp_config); + + kirkwood_uart0_init(); + kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&guruplug_ge00_data); + kirkwood_ge01_init(&guruplug_ge01_data); + kirkwood_sata_init(&guruplug_sata_data); + kirkwood_sdio_init(&guruplug_mvsdio_data); + + platform_device_register(&guruplug_leds); +} + +MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board") + /* Maintainer: Siddarth Gore <gores@marvell.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = guruplug_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c new file mode 100644 index 000000000000..8a2bb0228e4f --- /dev/null +++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c @@ -0,0 +1,415 @@ +/* + * arch/arm/mach-kirkwood/netxbig_v2-setup.c + * + * LaCie 2Big and 5Big Network v2 board setup + * + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/kirkwood.h> +#include <plat/time.h> +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) + ****************************************************************************/ + +static struct mtd_partition netxbig_v2_flash_parts[] = { + { + .name = "u-boot", + .size = MTDPART_SIZ_FULL, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, +}; + +static const struct flash_platform_data netxbig_v2_flash = { + .type = "mx25l4005a", + .name = "spi_flash", + .parts = netxbig_v2_flash_parts, + .nr_parts = ARRAY_SIZE(netxbig_v2_flash_parts), +}; + +static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &netxbig_v2_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +/***************************************************************************** + * I2C devices + ****************************************************************************/ + +static struct at24_platform_data at24c04 = { + .byte_len = SZ_4K / 8, + .page_size = 16, +}; + +/* + * i2c addr | chip | description + * 0x50 | HT24LC04 | eeprom (512B) + */ + +static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = { + { + I2C_BOARD_INFO("24c04", 0x50), + .platform_data = &at24c04, + } +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data netxbig_v2_sata_data = { + .n_ports = 2, +}; + +static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 }; + +static void __init netxbig_v2_sata_power_init(void) +{ + int i; + int err; + int hdd_nb; + + if (machine_is_net2big_v2()) + hdd_nb = 2; + else + hdd_nb = 5; + + /* Power up all hard disks. */ + for (i = 0; i < hdd_nb; i++) { + err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL); + if (err == 0) { + err = gpio_direction_output( + netxbig_v2_gpio_hdd_power[i], 1); + /* Free the HDD power GPIOs. This allow user-space to + * configure them via the gpiolib sysfs interface. */ + gpio_free(netxbig_v2_gpio_hdd_power[i]); + } + if (err) + pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1); + } +} + +/***************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define NETXBIG_V2_GPIO_SWITCH_POWER_ON 13 +#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF 15 +#define NETXBIG_V2_GPIO_FUNC_BUTTON 34 + +#define NETXBIG_V2_SWITCH_POWER_ON 0x1 +#define NETXBIG_V2_SWITCH_POWER_OFF 0x2 + +static struct gpio_keys_button netxbig_v2_buttons[] = { + [0] = { + .type = EV_SW, + .code = NETXBIG_V2_SWITCH_POWER_ON, + .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_ON, + .desc = "Back power switch (on|auto)", + .active_low = 1, + }, + [1] = { + .type = EV_SW, + .code = NETXBIG_V2_SWITCH_POWER_OFF, + .gpio = NETXBIG_V2_GPIO_SWITCH_POWER_OFF, + .desc = "Back power switch (auto|off)", + .active_low = 1, + }, + [2] = { + .code = KEY_OPTION, + .gpio = NETXBIG_V2_GPIO_FUNC_BUTTON, + .desc = "Function button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data netxbig_v2_button_data = { + .buttons = netxbig_v2_buttons, + .nbuttons = ARRAY_SIZE(netxbig_v2_buttons), +}; + +static struct platform_device netxbig_v2_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &netxbig_v2_button_data, + }, +}; + +/***************************************************************************** + * GPIO LEDs + ****************************************************************************/ + +/* + * The LEDs are controlled by a CPLD and can be configured through a GPIO + * extension bus: + * + * - address register : bit [0-2] -> GPIO [47-49] + * - data register : bit [0-2] -> GPIO [44-46] + * - enable register : GPIO 29 + * + * Address register selection: + * + * addr | register + * ---------------------------- + * 0 | front LED + * 1 | front LED brightness + * 2 | HDD LED brightness + * 3 | HDD1 LED + * 4 | HDD2 LED + * 5 | HDD3 LED + * 6 | HDD4 LED + * 7 | HDD5 LED + * + * Data register configuration: + * + * data | LED brightness + * ------------------------------------------------- + * 0 | min (off) + * - | - + * 7 | max + * + * data | front LED mode + * ------------------------------------------------- + * 0 | fix off + * 1 | fix blue on + * 2 | fix red on + * 3 | blink blue on=1 sec and blue off=1 sec + * 4 | blink red on=1 sec and red off=1 sec + * 5 | blink blue on=2.5 sec and red on=0.5 sec + * 6 | blink blue on=1 sec and red on=1 sec + * 7 | blink blue on=0.5 sec and blue off=2.5 sec + * + * data | HDD LED mode + * ------------------------------------------------- + * 0 | fix blue on + * 1 | SATA activity blink + * 2 | fix red on + * 3 | blink blue on=1 sec and blue off=1 sec + * 4 | blink red on=1 sec and red off=1 sec + * 5 | blink blue on=2.5 sec and red on=0.5 sec + * 6 | blink blue on=1 sec and red on=1 sec + * 7 | blink blue on=0.5 sec and blue off=2.5 sec + */ + +/***************************************************************************** + * Timer + ****************************************************************************/ + +static void netxbig_v2_timer_init(void) +{ + kirkwood_tclk = 166666667; + orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); +} + +struct sys_timer netxbig_v2_timer = { + .init = netxbig_v2_timer_init, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static unsigned int net2big_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Request power-off */ + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_GPIO, /* Rear power switch (on|auto) */ + MPP14_GPIO, /* USB fuse alarm */ + MPP15_GPIO, /* Rear power switch (auto|off) */ + MPP16_GPIO, /* SATA HDD1 power */ + MPP17_GPIO, /* SATA HDD2 power */ + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP24_GPIO, /* USB mode select */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* CPLD extension ALE */ + MPP34_GPIO, /* Rear Push button */ + MPP35_GPIO, /* Inhibit switch power-off */ + MPP36_GPIO, /* SATA HDD1 presence */ + MPP37_GPIO, /* SATA HDD2 presence */ + MPP40_GPIO, /* eSATA presence */ + MPP44_GPIO, /* CPLD extension (data 0) */ + MPP45_GPIO, /* CPLD extension (data 1) */ + MPP46_GPIO, /* CPLD extension (data 2) */ + MPP47_GPIO, /* CPLD extension (addr 0) */ + MPP48_GPIO, /* CPLD extension (addr 1) */ + MPP49_GPIO, /* CPLD extension (addr 2) */ + 0 +}; + +static unsigned int net5big_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Request power-off */ + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_GPIO, /* Rear power switch (on|auto) */ + MPP14_GPIO, /* USB fuse alarm */ + MPP15_GPIO, /* Rear power switch (auto|off) */ + MPP16_GPIO, /* SATA HDD1 power */ + MPP17_GPIO, /* SATA HDD2 power */ + MPP20_GE1_0, + MPP21_GE1_1, + MPP22_GE1_2, + MPP23_GE1_3, + MPP24_GE1_4, + MPP25_GE1_5, + MPP26_GE1_6, + MPP27_GE1_7, + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* CPLD extension ALE */ + MPP30_GE1_10, + MPP31_GE1_11, + MPP32_GE1_12, + MPP33_GE1_13, + MPP34_GPIO, /* Rear Push button */ + MPP35_GPIO, /* Inhibit switch power-off */ + MPP36_GPIO, /* SATA HDD1 presence */ + MPP37_GPIO, /* SATA HDD2 presence */ + MPP38_GPIO, /* SATA HDD3 presence */ + MPP39_GPIO, /* SATA HDD4 presence */ + MPP40_GPIO, /* SATA HDD5 presence */ + MPP41_GPIO, /* SATA HDD3 power */ + MPP42_GPIO, /* SATA HDD4 power */ + MPP43_GPIO, /* SATA HDD5 power */ + MPP44_GPIO, /* CPLD extension (data 0) */ + MPP45_GPIO, /* CPLD extension (data 1) */ + MPP46_GPIO, /* CPLD extension (data 2) */ + MPP47_GPIO, /* CPLD extension (addr 0) */ + MPP48_GPIO, /* CPLD extension (addr 1) */ + MPP49_GPIO, /* CPLD extension (addr 2) */ + 0 +}; + +#define NETXBIG_V2_GPIO_POWER_OFF 7 + +static void netxbig_v2_power_off(void) +{ + gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1); +} + +static void __init netxbig_v2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + if (machine_is_net2big_v2()) + kirkwood_mpp_conf(net2big_v2_mpp_config); + else + kirkwood_mpp_conf(net5big_v2_mpp_config); + + netxbig_v2_sata_power_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&netxbig_v2_ge00_data); + if (machine_is_net5big_v2()) + kirkwood_ge01_init(&netxbig_v2_ge01_data); + kirkwood_sata_init(&netxbig_v2_sata_data); + kirkwood_uart0_init(); + spi_register_board_info(netxbig_v2_spi_slave_info, + ARRAY_SIZE(netxbig_v2_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_i2c_init(); + i2c_register_board_info(0, netxbig_v2_i2c_info, + ARRAY_SIZE(netxbig_v2_i2c_info)); + + platform_device_register(&netxbig_v2_gpio_buttons); + + if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = netxbig_v2_power_off; + else + pr_err("netxbig_v2: failed to configure power-off GPIO\n"); +} + +#ifdef CONFIG_MACH_NET2BIG_V2 +MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = netxbig_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &netxbig_v2_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_NET5BIG_V2 +MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = netxbig_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &netxbig_v2_timer, +MACHINE_END +#endif diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index a2d307ec0420..244655d323ea 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -59,6 +59,13 @@ static unsigned long common_pin_config[] __initdata = { /* UART1 */ GPIO107_UART1_RXD, GPIO108_UART1_TXD, + + /* SSP1 */ + GPIO113_I2S_MCLK, + GPIO114_I2S_FRM, + GPIO115_I2S_BCLK, + GPIO116_I2S_RXD, + GPIO117_I2S_TXD, }; static struct smc91x_platdata smc91x_info = { @@ -123,12 +130,18 @@ static struct pxa3xx_nand_platform_data aspenite_nand_info = { .nr_parts = ARRAY_SIZE(aspenite_nand_partitions), }; +static struct i2c_board_info aspenite_i2c_info[] __initdata = { + { I2C_BOARD_INFO("wm8753", 0x1b), }, +}; + static void __init common_init(void) { mfp_config(ARRAY_AND_SIZE(common_pin_config)); /* on-chip devices */ pxa168_add_uart(1); + pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info)); + pxa168_add_ssp(1); pxa168_add_nand(&aspenite_nand_info); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h index ab26d13295c4..ee8b02ed8011 100644 --- a/arch/arm/mach-mmp/include/mach/gpio.h +++ b/arch/arm/mach-mmp/include/mach/gpio.h @@ -10,7 +10,7 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) -#define NR_BUILTIN_GPIO (128) +#define NR_BUILTIN_GPIO (192) #define gpio_to_bank(gpio) ((gpio) >> 5) #define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio)) diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h index 02701196ea03..b379cdec4d38 100644 --- a/arch/arm/mach-mmp/include/mach/irqs.h +++ b/arch/arm/mach-mmp/include/mach/irqs.h @@ -5,10 +5,10 @@ * Interrupt numbers for PXA168 */ #define IRQ_PXA168_NONE (-1) -#define IRQ_PXA168_SSP3 0 -#define IRQ_PXA168_SSP2 1 -#define IRQ_PXA168_SSP1 2 -#define IRQ_PXA168_SSP0 3 +#define IRQ_PXA168_SSP4 0 +#define IRQ_PXA168_SSP3 1 +#define IRQ_PXA168_SSP2 2 +#define IRQ_PXA168_SSP1 3 #define IRQ_PXA168_PMIC_INT 4 #define IRQ_PXA168_RTC_INT 5 #define IRQ_PXA168_RTC_ALARM 6 @@ -20,7 +20,7 @@ #define IRQ_PXA168_TIMER2 14 #define IRQ_PXA168_TIMER3 15 #define IRQ_PXA168_CMU 16 -#define IRQ_PXA168_SSP4 17 +#define IRQ_PXA168_SSP5 17 #define IRQ_PXA168_MSP_WAKEUP 19 #define IRQ_PXA168_CF_WAKEUP 20 #define IRQ_PXA168_XD_WAKEUP 21 diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h index 9f9f8143e272..761c2dacc079 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h @@ -9,6 +9,175 @@ #define MFP_DRIVE_FAST (0x8 << 13) /* GPIO */ +#define GPIO0_GPIO0 MFP_CFG(GPIO0, AF0) +#define GPIO1_GPIO1 MFP_CFG(GPIO1, AF0) +#define GPIO2_GPIO2 MFP_CFG(GPIO2, AF0) +#define GPIO3_GPIO3 MFP_CFG(GPIO3, AF0) +#define GPIO4_GPIO4 MFP_CFG(GPIO4, AF0) +#define GPIO5_GPIO5 MFP_CFG(GPIO5, AF0) +#define GPIO6_GPIO6 MFP_CFG(GPIO6, AF0) +#define GPIO7_GPIO7 MFP_CFG(GPIO7, AF0) +#define GPIO8_GPIO8 MFP_CFG(GPIO8, AF0) +#define GPIO9_GPIO9 MFP_CFG(GPIO9, AF0) +#define GPIO10_GPIO10 MFP_CFG(GPIO10, AF0) +#define GPIO11_GPIO11 MFP_CFG(GPIO11, AF0) +#define GPIO12_GPIO12 MFP_CFG(GPIO12, AF0) +#define GPIO13_GPIO13 MFP_CFG(GPIO13, AF0) +#define GPIO14_GPIO14 MFP_CFG(GPIO14, AF0) +#define GPIO15_GPIO15 MFP_CFG(GPIO15, AF0) +#define GPIO16_GPIO16 MFP_CFG(GPIO16, AF0) +#define GPIO17_GPIO17 MFP_CFG(GPIO17, AF0) +#define GPIO18_GPIO18 MFP_CFG(GPIO18, AF0) +#define GPIO19_GPIO19 MFP_CFG(GPIO19, AF0) +#define GPIO20_GPIO20 MFP_CFG(GPIO20, AF0) +#define GPIO21_GPIO21 MFP_CFG(GPIO21, AF0) +#define GPIO22_GPIO22 MFP_CFG(GPIO22, AF0) +#define GPIO23_GPIO23 MFP_CFG(GPIO23, AF0) +#define GPIO24_GPIO24 MFP_CFG(GPIO24, AF0) +#define GPIO25_GPIO25 MFP_CFG(GPIO25, AF0) +#define GPIO26_GPIO26 MFP_CFG(GPIO26, AF0) +#define GPIO27_GPIO27 MFP_CFG(GPIO27, AF0) +#define GPIO28_GPIO28 MFP_CFG(GPIO28, AF0) +#define GPIO29_GPIO29 MFP_CFG(GPIO29, AF0) +#define GPIO30_GPIO30 MFP_CFG(GPIO30, AF0) +#define GPIO31_GPIO31 MFP_CFG(GPIO31, AF0) +#define GPIO32_GPIO32 MFP_CFG(GPIO32, AF0) +#define GPIO33_GPIO33 MFP_CFG(GPIO33, AF0) +#define GPIO34_GPIO34 MFP_CFG(GPIO34, AF0) +#define GPIO35_GPIO35 MFP_CFG(GPIO35, AF0) +#define GPIO36_GPIO36 MFP_CFG(GPIO36, AF0) +#define GPIO37_GPIO37 MFP_CFG(GPIO37, AF0) +#define GPIO38_GPIO38 MFP_CFG(GPIO38, AF0) +#define GPIO39_GPIO39 MFP_CFG(GPIO39, AF0) +#define GPIO40_GPIO40 MFP_CFG(GPIO40, AF0) +#define GPIO41_GPIO41 MFP_CFG(GPIO41, AF0) +#define GPIO42_GPIO42 MFP_CFG(GPIO42, AF0) +#define GPIO43_GPIO43 MFP_CFG(GPIO43, AF0) +#define GPIO44_GPIO44 MFP_CFG(GPIO44, AF0) +#define GPIO45_GPIO45 MFP_CFG(GPIO45, AF0) +#define GPIO46_GPIO46 MFP_CFG(GPIO46, AF0) +#define GPIO47_GPIO47 MFP_CFG(GPIO47, AF0) +#define GPIO48_GPIO48 MFP_CFG(GPIO48, AF0) +#define GPIO49_GPIO49 MFP_CFG(GPIO49, AF0) +#define GPIO50_GPIO50 MFP_CFG(GPIO50, AF0) +#define GPIO51_GPIO51 MFP_CFG(GPIO51, AF0) +#define GPIO52_GPIO52 MFP_CFG(GPIO52, AF0) +#define GPIO53_GPIO53 MFP_CFG(GPIO53, AF0) +#define GPIO54_GPIO54 MFP_CFG(GPIO54, AF0) +#define GPIO55_GPIO55 MFP_CFG(GPIO55, AF0) +#define GPIO56_GPIO56 MFP_CFG(GPIO56, AF0) +#define GPIO57_GPIO57 MFP_CFG(GPIO57, AF0) +#define GPIO58_GPIO58 MFP_CFG(GPIO58, AF0) +#define GPIO59_GPIO59 MFP_CFG(GPIO59, AF0) +#define GPIO60_GPIO60 MFP_CFG(GPIO60, AF0) +#define GPIO61_GPIO61 MFP_CFG(GPIO61, AF0) +#define GPIO62_GPIO62 MFP_CFG(GPIO62, AF0) +#define GPIO63_GPIO63 MFP_CFG(GPIO63, AF0) +#define GPIO64_GPIO64 MFP_CFG(GPIO64, AF0) +#define GPIO65_GPIO65 MFP_CFG(GPIO65, AF0) +#define GPIO66_GPIO66 MFP_CFG(GPIO66, AF0) +#define GPIO67_GPIO67 MFP_CFG(GPIO67, AF0) +#define GPIO68_GPIO68 MFP_CFG(GPIO68, AF0) +#define GPIO69_GPIO69 MFP_CFG(GPIO69, AF0) +#define GPIO70_GPIO70 MFP_CFG(GPIO70, AF0) +#define GPIO71_GPIO71 MFP_CFG(GPIO71, AF0) +#define GPIO72_GPIO72 MFP_CFG(GPIO72, AF0) +#define GPIO73_GPIO73 MFP_CFG(GPIO73, AF0) +#define GPIO74_GPIO74 MFP_CFG(GPIO74, AF0) +#define GPIO75_GPIO75 MFP_CFG(GPIO75, AF0) +#define GPIO76_GPIO76 MFP_CFG(GPIO76, AF0) +#define GPIO77_GPIO77 MFP_CFG(GPIO77, AF0) +#define GPIO78_GPIO78 MFP_CFG(GPIO78, AF0) +#define GPIO79_GPIO79 MFP_CFG(GPIO79, AF0) +#define GPIO80_GPIO80 MFP_CFG(GPIO80, AF0) +#define GPIO81_GPIO81 MFP_CFG(GPIO81, AF0) +#define GPIO82_GPIO82 MFP_CFG(GPIO82, AF0) +#define GPIO83_GPIO83 MFP_CFG(GPIO83, AF0) +#define GPIO84_GPIO84 MFP_CFG(GPIO84, AF0) +#define GPIO85_GPIO85 MFP_CFG(GPIO85, AF0) +#define GPIO86_GPIO86 MFP_CFG(GPIO86, AF0) +#define GPIO87_GPIO87 MFP_CFG(GPIO87, AF0) +#define GPIO88_GPIO88 MFP_CFG(GPIO88, AF0) +#define GPIO89_GPIO89 MFP_CFG(GPIO89, AF0) +#define GPIO90_GPIO90 MFP_CFG(GPIO90, AF0) +#define GPIO91_GPIO91 MFP_CFG(GPIO91, AF0) +#define GPIO92_GPIO92 MFP_CFG(GPIO92, AF0) +#define GPIO93_GPIO93 MFP_CFG(GPIO93, AF0) +#define GPIO94_GPIO94 MFP_CFG(GPIO94, AF0) +#define GPIO95_GPIO95 MFP_CFG(GPIO95, AF0) +#define GPIO96_GPIO96 MFP_CFG(GPIO96, AF0) +#define GPIO97_GPIO97 MFP_CFG(GPIO97, AF0) +#define GPIO98_GPIO98 MFP_CFG(GPIO98, AF0) +#define GPIO99_GPIO99 MFP_CFG(GPIO99, AF0) +#define GPIO100_GPIO100 MFP_CFG(GPIO100, AF0) +#define GPIO101_GPIO101 MFP_CFG(GPIO101, AF0) +#define GPIO102_GPIO102 MFP_CFG(GPIO102, AF1) +#define GPIO103_GPIO103 MFP_CFG(GPIO103, AF1) +#define GPIO104_GPIO104 MFP_CFG(GPIO104, AF1) +#define GPIO105_GPIO105 MFP_CFG(GPIO105, AF1) +#define GPIO106_GPIO106 MFP_CFG(GPIO106, AF1) +#define GPIO107_GPIO107 MFP_CFG(GPIO107, AF1) +#define GPIO108_GPIO108 MFP_CFG(GPIO108, AF1) +#define GPIO109_GPIO109 MFP_CFG(GPIO109, AF1) +#define GPIO110_GPIO110 MFP_CFG(GPIO110, AF1) +#define GPIO111_GPIO111 MFP_CFG(GPIO111, AF1) +#define GPIO112_GPIO112 MFP_CFG(GPIO112, AF1) +#define GPIO113_GPIO113 MFP_CFG(GPIO113, AF1) +#define GPIO114_GPIO114 MFP_CFG(GPIO114, AF0) +#define GPIO115_GPIO115 MFP_CFG(GPIO115, AF0) +#define GPIO116_GPIO116 MFP_CFG(GPIO116, AF0) +#define GPIO117_GPIO117 MFP_CFG(GPIO117, AF0) +#define GPIO118_GPIO118 MFP_CFG(GPIO118, AF0) +#define GPIO119_GPIO119 MFP_CFG(GPIO119, AF0) +#define GPIO120_GPIO120 MFP_CFG(GPIO120, AF0) +#define GPIO121_GPIO121 MFP_CFG(GPIO121, AF0) +#define GPIO122_GPIO122 MFP_CFG(GPIO122, AF0) +#define GPIO123_GPIO123 MFP_CFG(GPIO123, AF0) +#define GPIO124_GPIO124 MFP_CFG(GPIO124, AF0) +#define GPIO125_GPIO125 MFP_CFG(GPIO125, AF0) +#define GPIO126_GPIO126 MFP_CFG(GPIO126, AF0) +#define GPIO127_GPIO127 MFP_CFG(GPIO127, AF0) +#define GPIO128_GPIO128 MFP_CFG(GPIO128, AF0) +#define GPIO129_GPIO129 MFP_CFG(GPIO129, AF0) +#define GPIO130_GPIO130 MFP_CFG(GPIO130, AF0) +#define GPIO131_GPIO131 MFP_CFG(GPIO131, AF0) +#define GPIO132_GPIO132 MFP_CFG(GPIO132, AF0) +#define GPIO133_GPIO133 MFP_CFG(GPIO133, AF0) +#define GPIO134_GPIO134 MFP_CFG(GPIO134, AF0) +#define GPIO135_GPIO135 MFP_CFG(GPIO135, AF0) +#define GPIO136_GPIO136 MFP_CFG(GPIO136, AF0) +#define GPIO137_GPIO137 MFP_CFG(GPIO137, AF0) +#define GPIO138_GPIO138 MFP_CFG(GPIO138, AF0) +#define GPIO139_GPIO139 MFP_CFG(GPIO139, AF0) +#define GPIO140_GPIO140 MFP_CFG(GPIO140, AF0) +#define GPIO141_GPIO141 MFP_CFG(GPIO141, AF0) +#define GPIO142_GPIO142 MFP_CFG(GPIO142, AF1) +#define GPIO143_GPIO143 MFP_CFG(GPIO143, AF1) +#define GPIO144_GPIO144 MFP_CFG(GPIO144, AF1) +#define GPIO145_GPIO145 MFP_CFG(GPIO145, AF1) +#define GPIO146_GPIO146 MFP_CFG(GPIO146, AF1) +#define GPIO147_GPIO147 MFP_CFG(GPIO147, AF1) +#define GPIO148_GPIO148 MFP_CFG(GPIO148, AF1) +#define GPIO149_GPIO149 MFP_CFG(GPIO149, AF1) +#define GPIO150_GPIO150 MFP_CFG(GPIO150, AF1) +#define GPIO151_GPIO151 MFP_CFG(GPIO151, AF1) +#define GPIO152_GPIO152 MFP_CFG(GPIO152, AF1) +#define GPIO153_GPIO153 MFP_CFG(GPIO153, AF1) +#define GPIO154_GPIO154 MFP_CFG(GPIO154, AF1) +#define GPIO155_GPIO155 MFP_CFG(GPIO155, AF1) +#define GPIO156_GPIO156 MFP_CFG(GPIO156, AF1) +#define GPIO157_GPIO157 MFP_CFG(GPIO157, AF1) +#define GPIO158_GPIO158 MFP_CFG(GPIO158, AF1) +#define GPIO159_GPIO159 MFP_CFG(GPIO159, AF1) +#define GPIO160_GPIO160 MFP_CFG(GPIO160, AF1) +#define GPIO161_GPIO161 MFP_CFG(GPIO161, AF1) +#define GPIO162_GPIO162 MFP_CFG(GPIO162, AF1) +#define GPIO163_GPIO163 MFP_CFG(GPIO163, AF1) +#define GPIO164_GPIO164 MFP_CFG(GPIO164, AF1) +#define GPIO165_GPIO165 MFP_CFG(GPIO165, AF1) +#define GPIO166_GPIO166 MFP_CFG(GPIO166, AF1) +#define GPIO167_GPIO167 MFP_CFG(GPIO167, AF1) +#define GPIO168_GPIO168 MFP_CFG(GPIO168, AF1) /* DFI */ #define GPIO108_DFI_D15 MFP_CFG(GPIO108, AF0) @@ -47,7 +216,6 @@ /* Ethernet */ #define GPIO155_SM_ADVMUX MFP_CFG(GPIO155, AF2) -#define GPIO155_GPIO155 MFP_CFG(GPIO155, AF1) /* UART1 */ #define GPIO45_UART1_RXD MFP_CFG(GPIO45, AF1) @@ -159,6 +327,8 @@ #define GPIO44_TWSI2_SDA MFP_CFG_DRV(GPIO44, AF1, SLOW) #define GPIO71_TWSI3_SCL MFP_CFG_DRV(GPIO71, AF1, SLOW) #define GPIO72_TWSI3_SDA MFP_CFG_DRV(GPIO72, AF1, SLOW) +#define TWSI4_SCL MFP_CFG_DRV(TWSI4_SCL, AF0, SLOW) +#define TWSI4_SDA MFP_CFG_DRV(TWSI4_SDA, AF0, SLOW) #define GPIO99_TWSI5_SCL MFP_CFG_DRV(GPIO99, AF4, SLOW) #define GPIO100_TWSI5_SDA MFP_CFG_DRV(GPIO100, AF4, SLOW) #define GPIO97_TWSI6_SCL MFP_CFG_DRV(GPIO97, AF2, SLOW) @@ -218,21 +388,6 @@ #define GPIO69_CAM_MCLK MFP_CFG_DRV(GPIO69, AF1, FAST) #define GPIO70_CAM_PCLK MFP_CFG_DRV(GPIO70, AF1, FAST) -/* Wifi */ -#define GPIO45_GPIO45 MFP_CFG(GPIO45, AF0) -#define GPIO46_GPIO46 MFP_CFG(GPIO46, AF0) -#define GPIO21_GPIO21 MFP_CFG(GPIO21, AF0) -#define GPIO22_GPIO22 MFP_CFG(GPIO22, AF0) -#define GPIO55_GPIO55 MFP_CFG(GPIO55, AF0) -#define GPIO56_GPIO56 MFP_CFG(GPIO56, AF0) -#define GPIO57_GPIO57 MFP_CFG(GPIO57, AF0) -#define GPIO58_GPIO58 MFP_CFG(GPIO58, AF0) - -/* Codec*/ -#define GPIO23_GPIO23 MFP_CFG(GPIO23, AF0) - -#define GPIO101_GPIO101 MFP_CFG(GPIO101, AF0) - /* PMIC */ #define PMIC_PMIC_INT MFP_CFG(PMIC_INT, AF0) diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index 459f3be9cfb2..fec220bd5046 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -39,17 +39,17 @@ static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data, int ret; switch (id) { - case 0: d = &mmp2_device_twsi1; break; - case 1: d = &mmp2_device_twsi2; break; - case 2: d = &mmp2_device_twsi3; break; - case 3: d = &mmp2_device_twsi4; break; - case 4: d = &mmp2_device_twsi5; break; - case 5: d = &mmp2_device_twsi6; break; + case 1: d = &mmp2_device_twsi1; break; + case 2: d = &mmp2_device_twsi2; break; + case 3: d = &mmp2_device_twsi3; break; + case 4: d = &mmp2_device_twsi4; break; + case 5: d = &mmp2_device_twsi5; break; + case 6: d = &mmp2_device_twsi6; break; default: return -EINVAL; } - ret = i2c_register_board_info(id, info, size); + ret = i2c_register_board_info(id - 1, info, size); if (ret) return ret; diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index 3ad612cbdf09..3b2bd5d5eb05 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -14,6 +14,11 @@ extern struct pxa_device_desc pxa168_device_pwm1; extern struct pxa_device_desc pxa168_device_pwm2; extern struct pxa_device_desc pxa168_device_pwm3; extern struct pxa_device_desc pxa168_device_pwm4; +extern struct pxa_device_desc pxa168_device_ssp1; +extern struct pxa_device_desc pxa168_device_ssp2; +extern struct pxa_device_desc pxa168_device_ssp3; +extern struct pxa_device_desc pxa168_device_ssp4; +extern struct pxa_device_desc pxa168_device_ssp5; extern struct pxa_device_desc pxa168_device_nand; static inline int pxa168_add_uart(int id) @@ -67,6 +72,22 @@ static inline int pxa168_add_pwm(int id) return pxa_register_device(d, NULL, 0); } +static inline int pxa168_add_ssp(int id) +{ + struct pxa_device_desc *d = NULL; + + switch (id) { + case 1: d = &pxa168_device_ssp1; break; + case 2: d = &pxa168_device_ssp2; break; + case 3: d = &pxa168_device_ssp3; break; + case 4: d = &pxa168_device_ssp4; break; + case 5: d = &pxa168_device_ssp5; break; + default: + return -EINVAL; + } + return pxa_register_device(d, NULL, 0); +} + static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info) { return pxa_register_device(&pxa168_device_nand, info, sizeof(*info)); diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h index 712af03fd1af..1a96585336ba 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apbc.h +++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h @@ -26,8 +26,6 @@ #define APBC_PXA168_PWM2 APBC_REG(0x010) #define APBC_PXA168_PWM3 APBC_REG(0x014) #define APBC_PXA168_PWM4 APBC_REG(0x018) -#define APBC_PXA168_SSP1 APBC_REG(0x01c) -#define APBC_PXA168_SSP2 APBC_REG(0x020) #define APBC_PXA168_RTC APBC_REG(0x028) #define APBC_PXA168_TWSI0 APBC_REG(0x02c) #define APBC_PXA168_KPC APBC_REG(0x030) @@ -35,14 +33,16 @@ #define APBC_PXA168_AIB APBC_REG(0x03c) #define APBC_PXA168_SW_JTAG APBC_REG(0x040) #define APBC_PXA168_ONEWIRE APBC_REG(0x048) -#define APBC_PXA168_SSP3 APBC_REG(0x04c) #define APBC_PXA168_ASFAR APBC_REG(0x050) #define APBC_PXA168_ASSAR APBC_REG(0x054) -#define APBC_PXA168_SSP4 APBC_REG(0x058) -#define APBC_PXA168_SSP5 APBC_REG(0x05c) #define APBC_PXA168_TWSI1 APBC_REG(0x06c) #define APBC_PXA168_UART3 APBC_REG(0x070) #define APBC_PXA168_AC97 APBC_REG(0x084) +#define APBC_PXA168_SSP1 APBC_REG(0x81c) +#define APBC_PXA168_SSP2 APBC_REG(0x820) +#define APBC_PXA168_SSP3 APBC_REG(0x84c) +#define APBC_PXA168_SSP4 APBC_REG(0x858) +#define APBC_PXA168_SSP5 APBC_REG(0x85c) /* * APB Clock register offsets for PXA910 diff --git a/arch/arm/mach-mmp/include/mach/regs-smc.h b/arch/arm/mach-mmp/include/mach/regs-smc.h new file mode 100644 index 000000000000..e484d40d71bd --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/regs-smc.h @@ -0,0 +1,37 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/regs-smc.h + * + * Static Memory Controller Registers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_REGS_SMC_H +#define __ASM_MACH_REGS_SMC_H + +#include <mach/addr-map.h> + +#define SMC_VIRT_BASE (AXI_VIRT_BASE + 0x83800) +#define SMC_REG(x) (SMC_VIRT_BASE + (x)) + +#define SMC_MSC0 SMC_REG(0x0020) +#define SMC_MSC1 SMC_REG(0x0024) +#define SMC_SXCNFG0 SMC_REG(0x0030) +#define SMC_SXCNFG1 SMC_REG(0x0034) +#define SMC_MEMCLKCFG SMC_REG(0x0068) +#define SMC_CSDFICFG0 SMC_REG(0x0090) +#define SMC_CSDFICFG1 SMC_REG(0x0094) +#define SMC_CLK_RET_DEL SMC_REG(0x00b0) +#define SMC_ADV_RET_DEL SMC_REG(0x00b4) +#define SMC_CSADRMAP0 SMC_REG(0x00c0) +#define SMC_CSADRMAP1 SMC_REG(0x00c4) +#define SMC_WE_AP0 SMC_REG(0x00e0) +#define SMC_WE_AP1 SMC_REG(0x00e4) +#define SMC_OE_AP0 SMC_REG(0x00f0) +#define SMC_OE_AP1 SMC_REG(0x00f4) +#define SMC_ADV_AP0 SMC_REG(0x0100) +#define SMC_ADV_AP1 SMC_REG(0x0104) + +#endif /* __ASM_MACH_REGS_SMC_H */ diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h index 6cebbd0ca8f4..70c9f1d88c02 100644 --- a/arch/arm/mach-mmp/include/mach/timex.h +++ b/arch/arm/mach-mmp/include/mach/timex.h @@ -6,4 +6,8 @@ * published by the Free Software Foundation. */ +#ifdef CONFIG_CPU_MMP2 +#define CLOCK_TICK_RATE 6500000 +#else #define CLOCK_TICK_RATE 3250000 +#endif diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index cfd4d66ef800..d77dd41d60e1 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -15,12 +15,16 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/max8649.h> +#include <linux/mfd/max8925.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> #include <mach/mfp-mmp2.h> #include <mach/mmp2.h> +#include <mach/irqs.h> #include "common.h" @@ -58,6 +62,63 @@ static unsigned long jasper_pin_config[] __initdata = { GPIO149_ND_CLE, GPIO112_ND_RDY0, GPIO160_ND_RDY1, + + /* PMIC */ + PMIC_PMIC_INT | MFP_LPM_EDGE_FALL, +}; + +static struct regulator_consumer_supply max8649_supply[] = { + REGULATOR_SUPPLY("vcc_core", NULL), +}; + +static struct regulator_init_data max8649_init_data = { + .constraints = { + .name = "vcc_core range", + .min_uV = 1150000, + .max_uV = 1280000, + .always_on = 1, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8649_supply[0], +}; + +static struct max8649_platform_data jasper_max8649_info = { + .mode = 2, /* VID1 = 1, VID0 = 0 */ + .extclk = 0, + .ramp_timing = MAX8649_RAMP_32MV, + .regulator = &max8649_init_data, +}; + +static struct max8925_backlight_pdata jasper_backlight_data = { + .dual_string = 0, +}; + +static struct max8925_power_pdata jasper_power_data = { + .batt_detect = 0, /* can't detect battery by ID pin */ + .topoff_threshold = MAX8925_TOPOFF_THR_10PER, + .fast_charge = MAX8925_FCHG_1000MA, +}; + +static struct max8925_platform_data jasper_max8925_info = { + .backlight = &jasper_backlight_data, + .power = &jasper_power_data, + .irq_base = IRQ_BOARD_START, +}; + +static struct i2c_board_info jasper_twsi1_info[] = { + [0] = { + .type = "max8649", + .addr = 0x60, + .platform_data = &jasper_max8649_info, + }, + [1] = { + .type = "max8925", + .addr = 0x3c, + .irq = IRQ_MMP2_PMIC, + .platform_data = &jasper_max8925_info, + }, }; static void __init jasper_init(void) @@ -67,6 +128,9 @@ static void __init jasper_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(3); + mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info)); + + regulator_has_full_constraints(); } MACHINE_START(MARVELL_JASPER, "Jasper Development Platform") diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 72eb9daeea99..7f5eb059bb01 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -15,11 +15,14 @@ #include <linux/init.h> #include <linux/io.h> +#include <asm/hardware/cache-tauros2.h> + #include <mach/addr-map.h> #include <mach/regs-apbc.h> #include <mach/regs-apmu.h> #include <mach/cputype.h> #include <mach/irqs.h> +#include <mach/dma.h> #include <mach/mfp.h> #include <mach/gpio.h> #include <mach/devices.h> @@ -32,7 +35,50 @@ #define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c) static struct mfp_addr_map mmp2_addr_map[] __initdata = { + + MFP_ADDR_X(GPIO0, GPIO58, 0x54), + MFP_ADDR_X(GPIO59, GPIO73, 0x280), + MFP_ADDR_X(GPIO74, GPIO101, 0x170), + + MFP_ADDR(GPIO102, 0x0), + MFP_ADDR(GPIO103, 0x4), + MFP_ADDR(GPIO104, 0x1fc), + MFP_ADDR(GPIO105, 0x1f8), + MFP_ADDR(GPIO106, 0x1f4), + MFP_ADDR(GPIO107, 0x1f0), + MFP_ADDR(GPIO108, 0x21c), + MFP_ADDR(GPIO109, 0x218), + MFP_ADDR(GPIO110, 0x214), + MFP_ADDR(GPIO111, 0x200), + MFP_ADDR(GPIO112, 0x244), + MFP_ADDR(GPIO113, 0x25c), + MFP_ADDR(GPIO114, 0x164), + MFP_ADDR_X(GPIO115, GPIO122, 0x260), + + MFP_ADDR(GPIO123, 0x148), + MFP_ADDR_X(GPIO124, GPIO141, 0xc), + + MFP_ADDR(GPIO142, 0x8), + MFP_ADDR_X(GPIO143, GPIO151, 0x220), + MFP_ADDR_X(GPIO152, GPIO153, 0x248), + MFP_ADDR_X(GPIO154, GPIO155, 0x254), + MFP_ADDR_X(GPIO156, GPIO159, 0x14c), + + MFP_ADDR(GPIO160, 0x250), + MFP_ADDR(GPIO161, 0x210), + MFP_ADDR(GPIO162, 0x20c), + MFP_ADDR(GPIO163, 0x208), + MFP_ADDR(GPIO164, 0x204), + MFP_ADDR(GPIO165, 0x1ec), + MFP_ADDR(GPIO166, 0x1e8), + MFP_ADDR(GPIO167, 0x1e4), + MFP_ADDR(GPIO168, 0x1e0), + + MFP_ADDR_X(TWSI1_SCL, TWSI1_SDA, 0x140), + MFP_ADDR_X(TWSI4_SCL, TWSI4_SDA, 0x2bc), + MFP_ADDR(PMIC_INT, 0x2c4), + MFP_ADDR(CLK_REQ, 0x160), MFP_ADDR_END, }; @@ -99,9 +145,13 @@ static struct clk_lookup mmp2_clkregs[] = { static int __init mmp2_init(void) { if (cpu_is_mmp2()) { +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(); +#endif mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(mmp2_addr_map); - clks_register(ARRAY_AND_SIZE(mmp2_clkregs)); + pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16); + clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs)); } return 0; diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 1873c821df90..652ae660634c 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -72,6 +72,11 @@ static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000); +static APBC_CLK(ssp1, PXA168_SSP1, 4, 0); +static APBC_CLK(ssp2, PXA168_SSP2, 4, 0); +static APBC_CLK(ssp3, PXA168_SSP3, 4, 0); +static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); +static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); static APMU_CLK(nand, NAND, 0x01db, 208000000); @@ -85,6 +90,11 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL), INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL), INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL), + INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL), + INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL), + INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL), + INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL), + INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), }; @@ -132,3 +142,8 @@ PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10); PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10); PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10); PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); +PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53); +PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55); +PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57); +PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59); +PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index f780086befd7..b9fd5c528e5b 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -29,12 +29,14 @@ endchoice config MACH_HALIBUT depends on ARCH_MSM + select CPU_V6 default y bool "Halibut Board (QCT SURF7201A)" help Support for the Qualcomm SURF7201A eval board. config MACH_TROUT + select CPU_V6 default y bool "HTC Dream (aka trout)" help diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 3c5e0f522e9c..71f3ea623974 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -6,6 +6,7 @@ config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" select NOMADIK_8815 select HAS_MTU + select NOMADIK_GPIO endmenu diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index 36f67fb207d2..a6bbd1a7b4e7 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -7,7 +7,7 @@ # Object file lists. -obj-y += clock.o gpio.o +obj-y += clock.o # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index ab3712c86d2b..841d459ad59d 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -32,7 +32,6 @@ #include <mach/setup.h> #include <mach/nand.h> #include <mach/fsmc.h> -#include "clock.h" /* Initial value for SRC control register: all timers use MXTAL/8 source */ #define SRC_CR_INIT_MASK 0x00007fff @@ -202,11 +201,6 @@ static struct amba_device *amba_devs[] __initdata = { &uart1_device, }; -/* We have a fixed clock alone, by now */ -static struct clk nhk8815_clk_48 = { - .rate = 48*1000*1000, -}; - static struct resource nhk8815_eth_resources[] = { { .name = "smc91x-regs", @@ -276,10 +270,8 @@ static void __init nhk8815_platform_init(void) platform_add_devices(nhk8815_platform_devices, ARRAY_SIZE(nhk8815_platform_devices)); - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name); + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) amba_device_register(amba_devs[i], &iomem_resource); - } } MACHINE_START(NOMADIK, "NHK8815") diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c index 9f92502a0083..60f5bee09f2e 100644 --- a/arch/arm/mach-nomadik/clock.c +++ b/arch/arm/mach-nomadik/clock.c @@ -32,14 +32,36 @@ void clk_disable(struct clk *clk) } EXPORT_SYMBOL(clk_disable); -/* Create a clock structure with the given name */ -int nmdk_clk_create(struct clk *clk, const char *dev_id) -{ - struct clk_lookup *clkdev; +/* We have a fixed clock alone, for now */ +static struct clk clk_48 = { + .rate = 48 * 1000 * 1000, +}; + +/* + * Catch-all default clock to satisfy drivers using the clk API. We don't + * model the actual hardware clocks yet. + */ +static struct clk clk_default; - clkdev = clkdev_alloc(clk, NULL, dev_id); - if (!clkdev) - return -ENOMEM; - clkdev_add(clkdev); +#define CLK(_clk, dev) \ + { \ + .clk = _clk, \ + .dev_id = dev, \ + } + +static struct clk_lookup lookups[] = { + CLK(&clk_48, "uart0"), + CLK(&clk_48, "uart1"), + CLK(&clk_default, "gpio.0"), + CLK(&clk_default, "gpio.1"), + CLK(&clk_default, "gpio.2"), + CLK(&clk_default, "gpio.3"), +}; + +static int __init clk_init(void) +{ + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); return 0; } + +arch_initcall(clk_init); diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h index 235faec7f627..5563985a2cc7 100644 --- a/arch/arm/mach-nomadik/clock.h +++ b/arch/arm/mach-nomadik/clock.h @@ -11,4 +11,3 @@ struct clk { unsigned long rate; }; -extern int nmdk_clk_create(struct clk *clk, const char *dev_id); diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index 9bf33b30a025..91c3c901b469 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/amba/bus.h> +#include <linux/platform_device.h> #include <linux/gpio.h> #include <mach/hardware.h> @@ -30,60 +31,66 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> +#define __MEM_4K_RESOURCE(x) \ + .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} + /* The 8815 has 4 GPIO blocks, let's register them immediately */ + +#define GPIO_RESOURCE(block) \ + { \ + .start = NOMADIK_GPIO##block##_BASE, \ + .end = NOMADIK_GPIO##block##_BASE + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = IRQ_GPIO##block, \ + .end = IRQ_GPIO##block, \ + .flags = IORESOURCE_IRQ, \ + } + +#define GPIO_DEVICE(block) \ + { \ + .name = "gpio", \ + .id = block, \ + .num_resources = 2, \ + .resource = &cpu8815_gpio_resources[block * 2], \ + .dev = { \ + .platform_data = &cpu8815_gpio[block], \ + }, \ + } + static struct nmk_gpio_platform_data cpu8815_gpio[] = { { .name = "GPIO-0-31", .first_gpio = 0, .first_irq = NOMADIK_GPIO_TO_IRQ(0), - .parent_irq = IRQ_GPIO0, }, { .name = "GPIO-32-63", .first_gpio = 32, .first_irq = NOMADIK_GPIO_TO_IRQ(32), - .parent_irq = IRQ_GPIO1, }, { .name = "GPIO-64-95", .first_gpio = 64, .first_irq = NOMADIK_GPIO_TO_IRQ(64), - .parent_irq = IRQ_GPIO2, }, { .name = "GPIO-96-127", /* 124..127 not routed to pin */ .first_gpio = 96, .first_irq = NOMADIK_GPIO_TO_IRQ(96), - .parent_irq = IRQ_GPIO3, } }; -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} +static struct resource cpu8815_gpio_resources[] = { + GPIO_RESOURCE(0), + GPIO_RESOURCE(1), + GPIO_RESOURCE(2), + GPIO_RESOURCE(3), +}; -static struct amba_device cpu8815_amba_gpio[] = { - { - .dev = { - .init_name = "gpio0", - .platform_data = cpu8815_gpio + 0, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE), - }, { - .dev = { - .init_name = "gpio1", - .platform_data = cpu8815_gpio + 1, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE), - }, { - .dev = { - .init_name = "gpio2", - .platform_data = cpu8815_gpio + 2, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE), - }, { - .dev = { - .init_name = "gpio3", - .platform_data = cpu8815_gpio + 3, - }, - __MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE), - }, +static struct platform_device cpu8815_platform_gpio[] = { + GPIO_DEVICE(0), + GPIO_DEVICE(1), + GPIO_DEVICE(2), + GPIO_DEVICE(3), }; static struct amba_device cpu8815_amba_rng = { @@ -93,11 +100,14 @@ static struct amba_device cpu8815_amba_rng = { __MEM_4K_RESOURCE(NOMADIK_RNG_BASE), }; +static struct platform_device *platform_devs[] __initdata = { + cpu8815_platform_gpio + 0, + cpu8815_platform_gpio + 1, + cpu8815_platform_gpio + 2, + cpu8815_platform_gpio + 3, +}; + static struct amba_device *amba_devs[] __initdata = { - cpu8815_amba_gpio + 0, - cpu8815_amba_gpio + 1, - cpu8815_amba_gpio + 2, - cpu8815_amba_gpio + 3, &cpu8815_amba_rng }; @@ -105,6 +115,7 @@ static int __init cpu8815_init(void) { int i; + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) amba_device_register(amba_devs[i], &iomem_resource); return 0; diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h index 61577c9f9a7d..7a81a0420343 100644 --- a/arch/arm/mach-nomadik/include/mach/gpio.h +++ b/arch/arm/mach-nomadik/include/mach/gpio.h @@ -1,71 +1,6 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H -#include <asm-generic/gpio.h> - -/* - * These currently cause a function call to happen, they may be optimized - * if needed by adding cpu-specific defines to identify blocks - * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) - */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -extern int nmk_gpio_get_mode(int gpio); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int parent_irq; -}; +#include <plat/gpio.h> #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index e36639f66150..8e313b4b99a9 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -28,7 +28,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> -#include <linux/bootmem.h> #include <linux/io.h> #include <linux/gpio.h> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 2271b9bd1f50..12154d10e536 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -17,8 +17,10 @@ #include <linux/clk.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/map.h> +#include <asm/pmu.h> #include <plat/control.h> #include <plat/tc.h> @@ -453,6 +455,37 @@ static void omap_init_mcspi(void) static inline void omap_init_mcspi(void) {} #endif +static struct resource omap2_pmu_resource = { + .start = 3, + .end = 3, + .flags = IORESOURCE_IRQ, +}; + +static struct resource omap3_pmu_resource = { + .start = INT_34XX_BENCH_MPU_EMUL, + .end = INT_34XX_BENCH_MPU_EMUL, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device omap_pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = 1, +}; + +static void omap_init_pmu(void) +{ + if (cpu_is_omap24xx()) + omap_pmu_device.resource = &omap2_pmu_resource; + else if (cpu_is_omap34xx()) + omap_pmu_device.resource = &omap3_pmu_resource; + else + return; + + platform_device_register(&omap_pmu_device); +} + + #ifdef CONFIG_OMAP_SHA1_MD5 static struct resource sha1_md5_resources[] = { { @@ -797,6 +830,7 @@ static int __init omap2_init_devices(void) omap_init_camera(); omap_init_mbox(); omap_init_mcspi(); + omap_init_pmu(); omap_hdq_init(); omap_init_sti(); omap_init_sha1_md5(); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e436dcb19795..2c12e8cd7183 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -43,7 +43,6 @@ #include <linux/err.h> #include <linux/list.h> #include <linux/mutex.h> -#include <linux/bootmem.h> #include <plat/common.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 421b82f7c63d..685f34a9634b 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -439,6 +439,7 @@ static void __init dns323_init(void) */ if (dns323_dev_id() == MV88F5181_DEV_ID) { dns323_leds[0].active_low = 1; + gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable"); gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); } diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 5b6ee46fa7f6..3b51741a4810 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -19,7 +19,6 @@ config MACH_MAINSTONE config MACH_ZYLONITE bool select PXA3xx - select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS @@ -39,7 +38,6 @@ config MACH_LITTLETON select PXA3xx select CPU_PXA300 select CPU_PXA310 - select PXA_SSP config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" @@ -98,7 +96,6 @@ config MACH_ARMCORE select PXA27x select IWMMXT select PXA25x - select PXA_SSP config MACH_EM_X270 bool "CompuLab EM-x270 platform" @@ -161,7 +158,6 @@ config MACH_XCEP select MTD_CFI select MTD_CHAR select SMC91X - select PXA_SSP help PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. Tuned for usage in Libera instruments for particle accelerators. @@ -180,7 +176,6 @@ config MACH_TRIZEPS4WL depends on TRIZEPS_PXA select TRIZEPS_PCMCIA select PXA27x - select PXA_SSP choice prompt "Select base board for Trizeps module" @@ -217,7 +212,6 @@ config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x select IWMMXT - select PXA_SSP select PXA_HAVE_BOARD_IRQS config MACH_PCM990_BASEBOARD @@ -255,13 +249,19 @@ config MACH_COLIBRI320 select PXA3xx select CPU_PXA320 +config MACH_VPAC270 + bool "Voipac PXA270" + select PXA27x + select HAVE_PATA_PLATFORM + help + PXA270 based Single Board Computer. + comment "End-user Products (sorted by vendor name)" config MACH_H4700 bool "HP iPAQ hx4700" select PXA27x select IWMMXT - select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS @@ -277,7 +277,6 @@ config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x select IWMMXT - select PXA_SSP select HAVE_PWM select PXA_HAVE_BOARD_IRQS @@ -431,13 +430,11 @@ config MACH_RAUMFELD_CONNECTOR bool "Raumfeld Connector" select PXA3xx select CPU_PXA300 - select PXA_SSP config MACH_RAUMFELD_SPEAKER bool "Raumfeld Speaker" select PXA3xx select CPU_PXA300 - select PXA_SSP config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" @@ -461,21 +458,11 @@ config SHARPSL_PM_MAX1111 select HWMON select SENSORS_MAX1111 -config CORGI_SSP_DEPRECATED - bool - select PXA_SSP - select PXA_SSP_LEGACY - help - This option will include corgi_ssp.c and corgi_lcd.c - that corgi_ts.c and other legacy drivers (corgi_bl.c - and sharpsl_pm.c) may depend on. - config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL select PXA25x select SHARP_LOCOMO - select PXA_SSP select PXA_HAVE_BOARD_IRQS config MACH_CORGI @@ -581,6 +568,12 @@ config MACH_E800 Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. +config MACH_ZIPIT2 + bool "Zipit Z2 Handheld" + select PXA27x + select HAVE_PWM + select PXA_HAVE_BOARD_IRQS + endmenu config PXA25x @@ -645,28 +638,16 @@ config CPU_PXA950 config PXA_SHARP_C7xx bool - select PXA_SSP select SHARPSL_PM help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool - select PXA_SSP select SHARPSL_PM help Enable common support for Sharp Cxx00 models -config PXA_SSP - tristate - help - Enable support for PXA2xx SSP ports - -config PXA_SSP_LEGACY - bool - help - Support of legacy SSP API - config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" depends on MACH_TOSA @@ -675,6 +656,18 @@ config TOSA_BT This is a simple driver that is able to control the state of built in bluetooth chip on tosa. +config TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on MACH_TOSA + default n + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + + config PXA_HAVE_BOARD_IRQS bool diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 86bc87b7f2dd..b8f1f4bc7ca7 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o endif # Generic drivers that other drivers may depend upon -obj-$(CONFIG_PXA_SSP) += ssp.o # SoC-specific code obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o @@ -62,6 +61,7 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o +obj-$(CONFIG_MACH_VPAC270) += vpac270.o # End-user Products obj-$(CONFIG_MACH_H4700) += hx4700.o @@ -80,7 +80,6 @@ obj-$(CONFIG_MACH_PALMLD) += palmld.o obj-$(CONFIG_PALM_TREO) += palmtreo.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o -obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o @@ -94,6 +93,7 @@ obj-$(CONFIG_MACH_E800) += e800.o obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o +obj-$(CONFIG_MACH_ZIPIT2) += z2.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index d37cfa132a65..fdda6be6c391 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -30,6 +30,9 @@ #include <linux/i2c/pca953x.h> #include <linux/mfd/da903x.h> +#include <linux/regulator/machine.h> +#include <linux/power_supply.h> +#include <linux/apm-emulation.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> @@ -430,7 +433,7 @@ static inline void cm_x300_init_nand(void) {} #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) static struct pxamci_platform_data cm_x300_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = GPIO82_MMC_IRQ, .gpio_card_ro = GPIO85_MMC_WP, @@ -451,7 +454,7 @@ static void cm_x300_mci2_exit(struct device *dev, void *data) } static struct pxamci_platform_data cm_x300_mci2_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = cm_x300_mci2_init, .exit = cm_x300_mci2_exit, @@ -584,12 +587,87 @@ static void __init cm_x300_init_rtc(void) static inline void cm_x300_init_rtc(void) {} #endif +/* Battery */ +struct power_supply_info cm_x300_psy_info = { + .name = "battery", + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + .voltage_max_design = 4200000, + .voltage_min_design = 3000000, + .use_for_apm = 1, +}; + +static void cm_x300_battery_low(void) +{ +#if defined(CONFIG_APM_EMULATION) + apm_queue_event(APM_LOW_BATTERY); +#endif +} + +static void cm_x300_battery_critical(void) +{ +#if defined(CONFIG_APM_EMULATION) + apm_queue_event(APM_CRITICAL_SUSPEND); +#endif +} + +struct da9030_battery_info cm_x300_battery_info = { + .battery_info = &cm_x300_psy_info, + + .charge_milliamp = 1000, + .charge_millivolt = 4200, + + .vbat_low = 3600, + .vbat_crit = 3400, + .vbat_charge_start = 4100, + .vbat_charge_stop = 4200, + .vbat_charge_restart = 4000, + + .vcharge_min = 3200, + .vcharge_max = 5500, + + .tbat_low = 197, + .tbat_high = 78, + .tbat_restart = 100, + + .batmon_interval = 0, + + .battery_low = cm_x300_battery_low, + .battery_critical = cm_x300_battery_critical, +}; + +static struct regulator_consumer_supply buck2_consumers[] = { + { + .dev = NULL, + .supply = "vcc_core", + }, +}; + +static struct regulator_init_data buck2_data = { + .constraints = { + .min_uV = 1375000, + .max_uV = 1375000, + .state_mem = { + .enabled = 0, + }, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(buck2_consumers), + .consumer_supplies = buck2_consumers, +}; + /* DA9030 */ struct da903x_subdev_info cm_x300_da9030_subdevs[] = { { - .name = "da903x-backlight", - .id = DA9030_ID_WLED, - } + .name = "da903x-battery", + .id = DA9030_ID_BAT, + .platform_data = &cm_x300_battery_info, + }, + { + .name = "da903x-regulator", + .id = DA9030_ID_BUCK2, + .platform_data = &buck2_data, + }, }; static struct da903x_platform_data cm_x300_da9030_info = { @@ -599,7 +677,7 @@ static struct da903x_platform_data cm_x300_da9030_info = { static struct i2c_board_info cm_x300_pmic_info = { I2C_BOARD_INFO("da9030", 0x49), - .irq = IRQ_GPIO(0), + .irq = IRQ_WAKEUP0, .platform_data = &cm_x300_da9030_info, }; @@ -689,13 +767,13 @@ static void __init cm_x300_init(void) static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags, char **cmdline, struct meminfo *mi) { - mi->nr_banks = 2; - mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; - mi->bank[0].size = (64*1024*1024); - mi->bank[1].start = 0xc0000000; - mi->bank[1].node = 0; - mi->bank[1].size = (64*1024*1024); + /* Make sure that mi->bank[0].start = PHYS_ADDR */ + for (; tags->hdr.size; tags = tag_next(tags)) + if (tags->hdr.tag == ATAG_MEM && + tags->u.mem.start == 0x80000000) { + tags->u.mem.start = 0xa0000000; + break; + } } MACHINE_START(CM_X300, "CM-X300 module") diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index e6c0a2287eb8..199afa2ae303 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -96,7 +96,7 @@ static void colibri_pxa3xx_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .init = colibri_pxa3xx_mci_init, .exit = colibri_pxa3xx_mci_exit, diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index da3156d8690b..3d1dcb9ac08f 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -106,18 +106,18 @@ static unsigned long corgi_pin_config[] __initdata = { GPIO8_MMC_CS0, /* GPIO Matrix Keypad */ - GPIO66_GPIO, /* column 0 */ - GPIO67_GPIO, /* column 1 */ - GPIO68_GPIO, /* column 2 */ - GPIO69_GPIO, /* column 3 */ - GPIO70_GPIO, /* column 4 */ - GPIO71_GPIO, /* column 5 */ - GPIO72_GPIO, /* column 6 */ - GPIO73_GPIO, /* column 7 */ - GPIO74_GPIO, /* column 8 */ - GPIO75_GPIO, /* column 9 */ - GPIO76_GPIO, /* column 10 */ - GPIO77_GPIO, /* column 11 */ + GPIO66_GPIO | MFP_LPM_DRIVE_HIGH, /* column 0 */ + GPIO67_GPIO | MFP_LPM_DRIVE_HIGH, /* column 1 */ + GPIO68_GPIO | MFP_LPM_DRIVE_HIGH, /* column 2 */ + GPIO69_GPIO | MFP_LPM_DRIVE_HIGH, /* column 3 */ + GPIO70_GPIO | MFP_LPM_DRIVE_HIGH, /* column 4 */ + GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* column 5 */ + GPIO72_GPIO | MFP_LPM_DRIVE_HIGH, /* column 6 */ + GPIO73_GPIO | MFP_LPM_DRIVE_HIGH, /* column 7 */ + GPIO74_GPIO | MFP_LPM_DRIVE_HIGH, /* column 8 */ + GPIO75_GPIO | MFP_LPM_DRIVE_HIGH, /* column 9 */ + GPIO76_GPIO | MFP_LPM_DRIVE_HIGH, /* column 10 */ + GPIO77_GPIO | MFP_LPM_DRIVE_HIGH, /* column 11 */ GPIO58_GPIO, /* row 0 */ GPIO59_GPIO, /* row 1 */ GPIO60_GPIO, /* row 2 */ @@ -128,13 +128,20 @@ static unsigned long corgi_pin_config[] __initdata = { GPIO65_GPIO, /* row 7 */ /* GPIO */ - GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */ - GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */ - GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */ - GPIO22_GPIO, /* CORGI_GPIO_IR_ON */ - GPIO44_GPIO, /* CORGI_GPIO_HSYNC */ - - GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, + GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */ + GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */ + GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */ + GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_LED_ORANGE */ + GPIO21_GPIO, /* CORGI_GPIO_ADC_TEMP */ + GPIO22_GPIO, /* CORGI_GPIO_IR_ON */ + GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */ + GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_ON */ + GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_UKN */ + GPIO44_GPIO, /* CORGI_GPIO_HSYNC */ + + GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_KEY_INT */ + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* CORGI_GPIO_AC_IN */ + GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_WAKEUP */ }; /* @@ -437,6 +444,7 @@ static struct platform_device corgiled_device = { * to give the card a chance to fully insert/eject. */ static struct pxamci_platform_data corgi_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = -1, .gpio_card_ro = CORGI_GPIO_nSD_WP, @@ -672,6 +680,15 @@ static void __init corgi_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config)); + /* allow wakeup from various GPIOs */ + gpio_set_wake(CORGI_GPIO_KEY_INT, 1); + gpio_set_wake(CORGI_GPIO_WAKEUP, 1); + gpio_set_wake(CORGI_GPIO_AC_IN, 1); + gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1); + + if (!machine_is_corgi()) + gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1); + pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); @@ -679,7 +696,6 @@ static void __init corgi_init(void) corgi_init_spi(); pxa_set_udc_info(&udc_info); - corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); pxa_set_i2c_info(NULL); diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c deleted file mode 100644 index d9b96319d498..000000000000 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ /dev/null @@ -1,288 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/corgi_lcd.c - * - * Corgi/Spitz LCD Specific Code - * - * Copyright (C) 2005 Richard Purdie - * - * Connectivity: - * Corgi - LCD to ATI Imageon w100 (Wallaby) - * Spitz - LCD to PXA Framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/string.h> -#include <mach/corgi.h> -#include <mach/hardware.h> -#include <mach/sharpsl.h> -#include <mach/spitz.h> -#include <asm/hardware/scoop.h> -#include <asm/mach/sharpsl_param.h> -#include "generic.h" - -/* Register Addresses */ -#define RESCTL_ADRS 0x00 -#define PHACTRL_ADRS 0x01 -#define DUTYCTRL_ADRS 0x02 -#define POWERREG0_ADRS 0x03 -#define POWERREG1_ADRS 0x04 -#define GPOR3_ADRS 0x05 -#define PICTRL_ADRS 0x06 -#define POLCTRL_ADRS 0x07 - -/* Register Bit Definitions */ -#define RESCTL_QVGA 0x01 -#define RESCTL_VGA 0x00 - -#define POWER1_VW_ON 0x01 /* VW Supply FET ON */ -#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */ -#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */ - -#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */ -#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */ -#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */ - -#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ -#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ -#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ -#define POWER0_COM_ON 0x08 /* COM Power Supply ON */ -#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ - -#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ -#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */ -#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ - -#define PICTRL_INIT_STATE 0x01 -#define PICTRL_INIOFF 0x02 -#define PICTRL_POWER_DOWN 0x04 -#define PICTRL_COM_SIGNAL_OFF 0x08 -#define PICTRL_DAC_SIGNAL_OFF 0x10 - -#define POLCTRL_SYNC_POL_FALL 0x01 -#define POLCTRL_EN_POL_FALL 0x02 -#define POLCTRL_DATA_POL_FALL 0x04 -#define POLCTRL_SYNC_ACT_H 0x08 -#define POLCTRL_EN_ACT_L 0x10 - -#define POLCTRL_SYNC_POL_RISE 0x00 -#define POLCTRL_EN_POL_RISE 0x00 -#define POLCTRL_DATA_POL_RISE 0x00 -#define POLCTRL_SYNC_ACT_L 0x00 -#define POLCTRL_EN_ACT_H 0x00 - -#define PHACTRL_PHASE_MANUAL 0x01 -#define DEFAULT_PHAD_QVGA (9) -#define DEFAULT_COMADJ (125) - -/* - * This is only a psuedo I2C interface. We can't use the standard kernel - * routines as the interface is write only. We just assume the data is acked... - */ -static void lcdtg_ssp_i2c_send(u8 data) -{ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, data); - udelay(10); -} - -static void lcdtg_i2c_send_bit(u8 data) -{ - lcdtg_ssp_i2c_send(data); - lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(data); -} - -static void lcdtg_i2c_send_start(u8 base) -{ - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base); -} - -static void lcdtg_i2c_send_stop(u8 base) -{ - lcdtg_ssp_i2c_send(base); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); -} - -static void lcdtg_i2c_send_byte(u8 base, u8 data) -{ - int i; - for (i = 0; i < 8; i++) { - if (data & 0x80) - lcdtg_i2c_send_bit(base | POWER0_COM_DOUT); - else - lcdtg_i2c_send_bit(base); - data <<= 1; - } -} - -static void lcdtg_i2c_wait_ack(u8 base) -{ - lcdtg_i2c_send_bit(base); -} - -static void lcdtg_set_common_voltage(u8 base_data, u8 data) -{ - /* Set Common Voltage to M62332FP via I2C */ - lcdtg_i2c_send_start(base_data); - lcdtg_i2c_send_byte(base_data, 0x9c); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, 0x00); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, data); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_stop(base_data); -} - -/* Set Phase Adjust */ -static void lcdtg_set_phadadj(int mode) -{ - int adj; - switch(mode) { - case 480: - case 640: - /* Setting for VGA */ - adj = sharpsl_param.phadadj; - if (adj < 0) { - adj = PHACTRL_PHASE_MANUAL; - } else { - adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL; - } - break; - case 240: - case 320: - default: - /* Setting for QVGA */ - adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL; - break; - } - - corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj); -} - -static int lcd_inited; - -void corgi_lcdtg_hw_init(int mode) -{ - if (!lcd_inited) { - int comadj; - - /* Initialize Internal Logic & Port */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE - | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF); - - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - /* VDD(+8V), SVSS(-4V) ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - mdelay(3); - - /* DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* INIB = H, INI = L */ - /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF); - - /* Set Common Voltage */ - comadj = sharpsl_param.comadj; - if (comadj < 0) - comadj = DEFAULT_COMADJ; - lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj); - - /* VCC5 ON, DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | - POWER0_COM_OFF | POWER0_VCC5_ON); - - /* GVSS(-8V) ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - mdelay(2); - - /* COM SIGNAL ON (PICTL[3] = L) */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE); - - /* COM ON, DAC ON, VCC5_ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_ON | POWER0_VCC5_ON); - - /* VW ON, GVSS ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* Signals output enable */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); - - /* Set Phase Adjust */ - lcdtg_set_phadadj(mode); - - /* Initialize for Input Signals from ATI */ - corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE - | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H); - udelay(1000); - - lcd_inited=1; - } else { - lcdtg_set_phadadj(mode); - } - - switch(mode) { - case 480: - case 640: - /* Set Lcd Resolution (VGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA); - break; - case 240: - case 320: - default: - /* Set Lcd Resolution (QVGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA); - break; - } -} - -void corgi_lcdtg_suspend(void) -{ - /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ - mdelay(34); - - /* (1)VW OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* (2)COM OFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF); - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON); - - /* (3)Set Common Voltage Bias 0V */ - lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0); - - /* (4)GVSS OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - - /* (5)VCC5 OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (6)Set PDWN, INIOFF, DACOFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF | - PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF); - - /* (7)DAC OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (8)VDD OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - lcd_inited = 0; -} - diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index d4a0733e905b..3f1dc74ac048 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> @@ -25,7 +26,8 @@ #include <mach/sharpsl.h> #include <mach/corgi.h> #include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> + +#include "generic.h" #include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ @@ -35,87 +37,46 @@ #define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ #define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ +static struct gpio charger_gpios[] = { + { CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, + { CORGI_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, + { CORGI_GPIO_CHRG_UKN, GPIOF_OUT_INIT_LOW, "Charger Unknown" }, + { CORGI_GPIO_KEY_INT, GPIOF_IN, "Key Interrupt" }, +}; + static void corgi_charger_init(void) { - pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT); - pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN); + gpio_request_array(ARRAY_AND_SIZE(charger_gpios)); } static void corgi_measure_temp(int on) { - if (on) - GPSR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); - else - GPCR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON); + gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on); } static void corgi_charge(int on) { if (on) { if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) { - GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); - GPSR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + gpio_set_value(CORGI_GPIO_CHRG_ON, 0); + gpio_set_value(CORGI_GPIO_CHRG_UKN, 1); } else { - GPSR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); - GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + gpio_set_value(CORGI_GPIO_CHRG_ON, 1); + gpio_set_value(CORGI_GPIO_CHRG_UKN, 0); } } else { - GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON); - GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN); + gpio_set_value(CORGI_GPIO_CHRG_ON, 0); + gpio_set_value(CORGI_GPIO_CHRG_UKN, 0); } } static void corgi_discharge(int on) { - if (on) - GPSR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); - else - GPCR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON); + gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on); } static void corgi_presuspend(void) { - int i; - unsigned long wakeup_mask; - - /* charging , so CHARGE_ON bit is HIGH during OFF. */ - if (READ_GPIO_BIT(CORGI_GPIO_CHRG_ON)) - PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_ON); - else - PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_ON); - - if (READ_GPIO_BIT(CORGI_GPIO_LED_ORANGE)) - PGSR0 |= GPIO_bit(CORGI_GPIO_LED_ORANGE); - else - PGSR0 &= ~GPIO_bit(CORGI_GPIO_LED_ORANGE); - - if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN)) - PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN); - else - PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN); - - /* Resume on keyboard power key */ - PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0); - - wakeup_mask = GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) | GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_CHRG_FULL); - - if (!machine_is_corgi()) - wakeup_mask |= GPIO_bit(CORGI_GPIO_MAIN_BAT_LOW); - - PWER = wakeup_mask | PWER_RTC; - PRER = wakeup_mask; - PFER = wakeup_mask; - - for (i = 0; i <=15; i++) { - if (PRER & PFER & GPIO_bit(i)) { - if (GPLR0 & GPIO_bit(i) ) - PRER &= ~GPIO_bit(i); - else - PFER &= ~GPIO_bit(i); - } - } } static void corgi_postsuspend(void) diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c deleted file mode 100644 index 9347254f8bcf..000000000000 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * SSP control code for Sharp Corgi devices - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <mach/ssp.h> -#include <mach/pxa2xx-gpio.h> -#include <mach/regs-ssp.h> -#include "sharpsl.h" - -static DEFINE_SPINLOCK(corgi_ssp_lock); -static struct ssp_dev corgi_ssp_dev; -static struct ssp_state corgi_ssp_state; -static struct corgissp_machinfo *ssp_machinfo; - -/* - * There are three devices connected to the SSP interface: - * 1. A touchscreen controller (TI ADS7846 compatible) - * 2. An LCD controller (with some Backlight functionality) - * 3. A battery monitoring IC (Maxim MAX1111) - * - * Each device uses a different speed/mode of communication. - * - * The touchscreen is very sensitive and the most frequently used - * so the port is left configured for this. - * - * Devices are selected using Chip Selects on GPIOs. - */ - -/* - * ADS7846 Routines - */ -unsigned long corgi_ssp_ads7846_putget(ulong data) -{ - unsigned long flag; - u32 ret = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, &ret); - - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return ret; -} - -/* - * NOTE: These functions should always be called in interrupt context - * and use the _lock and _unlock functions. They are very time sensitive. - */ -void corgi_ssp_ads7846_lock(void) -{ - spin_lock(&corgi_ssp_lock); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); -} - -void corgi_ssp_ads7846_unlock(void) -{ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock(&corgi_ssp_lock); -} - -void corgi_ssp_ads7846_put(ulong data) -{ - ssp_write_word(&corgi_ssp_dev,data); -} - -unsigned long corgi_ssp_ads7846_get(void) -{ - u32 ret = 0; - ssp_read_word(&corgi_ssp_dev, &ret); - return ret; -} - -EXPORT_SYMBOL(corgi_ssp_ads7846_putget); -EXPORT_SYMBOL(corgi_ssp_ads7846_lock); -EXPORT_SYMBOL(corgi_ssp_ads7846_unlock); -EXPORT_SYMBOL(corgi_ssp_ads7846_put); -EXPORT_SYMBOL(corgi_ssp_ads7846_get); - - -/* - * LCD/Backlight Routines - */ -unsigned long corgi_ssp_dac_put(ulong data) -{ - unsigned long flag, sscr1 = SSCR1_SPH; - u32 tmp; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - - if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi()) - sscr1 = 0; - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon)); - ssp_enable(&corgi_ssp_dev); - - if (ssp_machinfo->cs_lcdcon >= 0) - GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - ssp_write_word(&corgi_ssp_dev,data); - /* Read null data back from device to prevent SSP overflow */ - ssp_read_word(&corgi_ssp_dev, &tmp); - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return 0; -} - -void corgi_ssp_lcdtg_send(u8 adrs, u8 data) -{ - corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f)); -} - -void corgi_ssp_blduty_set(int duty) -{ - corgi_ssp_lcdtg_send(0x02,duty); -} - -EXPORT_SYMBOL(corgi_ssp_lcdtg_send); -EXPORT_SYMBOL(corgi_ssp_blduty_set); - -/* - * Max1111 Routines - */ -int corgi_ssp_max1111_get(ulong data) -{ - unsigned long flag; - long voltage = 0, voltage1 = 0, voltage2 = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_max1111 >= 0) - GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111)); - ssp_enable(&corgi_ssp_dev); - - udelay(1); - - /* TB1/RB1 */ - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */ - - /* TB12/RB2 */ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); - - /* TB13/RB3*/ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - if (voltage1 & 0xc0 || voltage2 & 0x3f) - voltage = -1; - else - voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03); - - return voltage; -} - -EXPORT_SYMBOL(corgi_ssp_max1111_get); - -/* - * Support Routines - */ - -void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) -{ - ssp_machinfo = machinfo; -} - -static int __devinit corgi_ssp_probe(struct platform_device *dev) -{ - int ret; - - /* Chip Select - Disable All */ - if (ssp_machinfo->cs_lcdcon >= 0) - pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_max1111 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_ads7846 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH); - - ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); - - if (ret) - printk(KERN_ERR "Unable to register SSP handler!\n"); - else { - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - } - - return ret; -} - -static int corgi_ssp_remove(struct platform_device *dev) -{ - ssp_exit(&corgi_ssp_dev); - return 0; -} - -static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state) -{ - ssp_flush(&corgi_ssp_dev); - ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); - - return 0; -} - -static int corgi_ssp_resume(struct platform_device *dev) -{ - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); - ssp_enable(&corgi_ssp_dev); - - return 0; -} - -static struct platform_driver corgissp_driver = { - .probe = corgi_ssp_probe, - .remove = corgi_ssp_remove, - .suspend = corgi_ssp_suspend, - .resume = corgi_ssp_resume, - .driver = { - .name = "corgi-ssp", - }, -}; - -int __init corgi_ssp_init(void) -{ - return platform_driver_register(&corgissp_driver); -} - -arch_initcall(corgi_ssp_init); diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 88575b87bd33..91fd4fea6a54 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -125,18 +125,9 @@ static unsigned long csb726_pin_config[] = { GPIO118_I2C_SDA, }; -static struct pxamci_platform_data csb726_mci_data; - -static int csb726_mci_init(struct device *dev, - irq_handler_t detect, void *data) -{ - csb726_mci_data.detect_delay = msecs_to_jiffies(500); - return 0; -} - static struct pxamci_platform_data csb726_mci = { + .detect_delay_ms = 500, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = csb726_mci_init, /* FIXME setpower */ .gpio_card_detect = CSB726_GPIO_MMC_DETECT, .gpio_card_ro = CSB726_GPIO_MMC_RO, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index aab04f33e49b..0517c17978f3 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -626,6 +626,7 @@ static int em_x270_mci_get_ro(struct device *dev) } static struct pxamci_platform_data em_x270_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23| MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27| MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30| @@ -643,7 +644,6 @@ static void __init em_x270_init_mmc(void) if (machine_is_em_x270()) em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro; - em_x270_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&em_x270_mci_platform_data); } #else diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 3126a35aa002..baabb3ce088e 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -28,7 +28,6 @@ #include <mach/reset.h> #include <mach/gpio.h> -#include <mach/pxa2xx-gpio.h> #include "generic.h" @@ -128,33 +127,3 @@ void __init pxa_map_io(void) iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); get_clk_frequency_khz(1); } - -/* - * Configure pins for GPIO or other functions - */ -int pxa_gpio_mode(int gpio_mode) -{ - unsigned long flags; - int gpio = gpio_mode & GPIO_MD_MASK_NR; - int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; - int gafr; - - if (gpio > pxa_last_gpio) - return -EINVAL; - - local_irq_save(flags); - if (gpio_mode & GPIO_DFLT_LOW) - GPCR(gpio) = GPIO_bit(gpio); - else if (gpio_mode & GPIO_DFLT_HIGH) - GPSR(gpio) = GPIO_bit(gpio); - if (gpio_mode & GPIO_MD_MASK_DIR) - GPDR(gpio) |= GPIO_bit(gpio); - else - GPDR(gpio) &= ~GPIO_bit(gpio); - gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); - GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); - local_irq_restore(flags); - - return 0; -} -EXPORT_SYMBOL(pxa_gpio_mode); diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 7239281788de..585970ef08ce 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -113,7 +113,6 @@ * Shared data structures */ extern struct platform_device corgiscoop_device; -extern struct platform_device corgissp_device; #endif /* __ASM_ARCH_CORGI_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index 658b28ed129b..c54cef25895c 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -25,6 +25,8 @@ #define MFP_DIR(x) (((x) >> 23) & 0x1) #define MFP_LPM_CAN_WAKEUP (0x1 << 24) +#define MFP_LPM_KEEP_OUTPUT (0x1 << 25) + #define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) #define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL) #define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH) diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h index 02a69dc2ee63..9eb515bb799d 100644 --- a/arch/arm/mach-pxa/include/mach/mmc.h +++ b/arch/arm/mach-pxa/include/mach/mmc.h @@ -9,7 +9,7 @@ struct mmc_host; struct pxamci_platform_data { unsigned int ocr_mask; /* available voltages */ - unsigned long detect_delay; /* delay in jiffies before detecting cards after interrupt */ + unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */ int (*init)(struct device *, irq_handler_t , void *); int (*get_ro)(struct device *); void (*setpower)(struct device *, unsigned int); diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h deleted file mode 100644 index 1209c44aa6f1..000000000000 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h +++ /dev/null @@ -1,375 +0,0 @@ -#ifndef __ASM_ARCH_PXA2XX_GPIO_H -#define __ASM_ARCH_PXA2XX_GPIO_H - -#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h - -#include <mach/gpio.h> - -/* GPIO alternate function assignments */ - -#define GPIO1_RST 1 /* reset */ -#define GPIO6_MMCCLK 6 /* MMC Clock */ -#define GPIO7_48MHz 7 /* 48 MHz clock output */ -#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ -#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ -#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ -#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ -#define GPIO12_32KHz 12 /* 32 kHz out */ -#define GPIO12_CIF_DD_7 12 /* Camera data pin 7 */ -#define GPIO13_MBGNT 13 /* memory controller grant */ -#define GPIO14_MBREQ 14 /* alternate bus master request */ -#define GPIO15_nCS_1 15 /* chip select 1 */ -#define GPIO16_PWM0 16 /* PWM0 output */ -#define GPIO17_PWM1 17 /* PWM1 output */ -#define GPIO17_CIF_DD_6 17 /* Camera data pin 6 */ -#define GPIO18_RDY 18 /* Ext. Bus Ready */ -#define GPIO19_DREQ1 19 /* External DMA Request */ -#define GPIO20_DREQ0 20 /* External DMA Request */ -#define GPIO23_SCLK 23 /* SSP clock */ -#define GPIO23_CIF_MCLK 23 /* Camera Master Clock */ -#define GPIO24_SFRM 24 /* SSP Frame */ -#define GPIO24_CIF_FV 24 /* Camera frame start signal */ -#define GPIO25_STXD 25 /* SSP transmit */ -#define GPIO25_CIF_LV 25 /* Camera line start signal */ -#define GPIO26_SRXD 26 /* SSP receive */ -#define GPIO26_CIF_PCLK 26 /* Camera Pixel Clock */ -#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ -#define GPIO27_CIF_DD_0 27 /* Camera data pin 0 */ -#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ -#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ -#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ -#define GPIO31_SYNC 31 /* AC97/I2S sync */ -#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ -#define GPIO32_SYSCLK 32 /* I2S System Clock */ -#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ -#define GPIO33_nCS_5 33 /* chip select 5 */ -#define GPIO34_FFRXD 34 /* FFUART receive */ -#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ -#define GPIO35_FFCTS 35 /* FFUART Clear to send */ -#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ -#define GPIO37_FFDSR 37 /* FFUART data set ready */ -#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ -#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ -#define GPIO39_FFTXD 39 /* FFUART transmit data */ -#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ -#define GPIO41_FFRTS 41 /* FFUART request to send */ -#define GPIO42_BTRXD 42 /* BTUART receive data */ -#define GPIO42_HWRXD 42 /* HWUART receive data */ -#define GPIO42_CIF_MCLK 42 /* Camera Master Clock */ -#define GPIO43_BTTXD 43 /* BTUART transmit data */ -#define GPIO43_HWTXD 43 /* HWUART transmit data */ -#define GPIO43_CIF_FV 43 /* Camera frame start signal */ -#define GPIO44_BTCTS 44 /* BTUART clear to send */ -#define GPIO44_HWCTS 44 /* HWUART clear to send */ -#define GPIO44_CIF_LV 44 /* Camera line start signal */ -#define GPIO45_BTRTS 45 /* BTUART request to send */ -#define GPIO45_HWRTS 45 /* HWUART request to send */ -#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ -#define GPIO45_CIF_PCLK 45 /* Camera Pixel Clock */ -#define GPIO46_ICPRXD 46 /* ICP receive data */ -#define GPIO46_STRXD 46 /* STD_UART receive data */ -#define GPIO47_ICPTXD 47 /* ICP transmit data */ -#define GPIO47_STTXD 47 /* STD_UART transmit data */ -#define GPIO47_CIF_DD_0 47 /* Camera data pin 0 */ -#define GPIO48_nPOE 48 /* Output Enable for Card Space */ -#define GPIO48_CIF_DD_5 48 /* Camera data pin 5 */ -#define GPIO49_nPWE 49 /* Write Enable for Card Space */ -#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ -#define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ -#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ -#define GPIO51_CIF_DD_2 51 /* Camera data pin 2 */ -#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ -#define GPIO52_CIF_DD_4 52 /* Camera data pin 4 */ -#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ -#define GPIO53_MMCCLK 53 /* MMC Clock */ -#define GPIO53_CIF_MCLK 53 /* Camera Master Clock */ -#define GPIO54_MMCCLK 54 /* MMC Clock */ -#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ -#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ -#define GPIO54_CIF_PCLK 54 /* Camera Pixel Clock */ -#define GPIO55_nPREG 55 /* Card Address bit 26 */ -#define GPIO55_CIF_DD_1 55 /* Camera data pin 1 */ -#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ -#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ -#define GPIO58_LDD_0 58 /* LCD data pin 0 */ -#define GPIO59_LDD_1 59 /* LCD data pin 1 */ -#define GPIO60_LDD_2 60 /* LCD data pin 2 */ -#define GPIO61_LDD_3 61 /* LCD data pin 3 */ -#define GPIO62_LDD_4 62 /* LCD data pin 4 */ -#define GPIO63_LDD_5 63 /* LCD data pin 5 */ -#define GPIO64_LDD_6 64 /* LCD data pin 6 */ -#define GPIO65_LDD_7 65 /* LCD data pin 7 */ -#define GPIO66_LDD_8 66 /* LCD data pin 8 */ -#define GPIO66_MBREQ 66 /* alternate bus master req */ -#define GPIO67_LDD_9 67 /* LCD data pin 9 */ -#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ -#define GPIO68_LDD_10 68 /* LCD data pin 10 */ -#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ -#define GPIO69_LDD_11 69 /* LCD data pin 11 */ -#define GPIO69_MMCCLK 69 /* MMC_CLK */ -#define GPIO70_LDD_12 70 /* LCD data pin 12 */ -#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ -#define GPIO71_LDD_13 71 /* LCD data pin 13 */ -#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ -#define GPIO72_LDD_14 72 /* LCD data pin 14 */ -#define GPIO72_32kHz 72 /* 32 kHz clock */ -#define GPIO73_LDD_15 73 /* LCD data pin 15 */ -#define GPIO73_MBGNT 73 /* Memory controller grant */ -#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ -#define GPIO75_LCD_LCLK 75 /* LCD line clock */ -#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ -#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ -#define GPIO78_nCS_2 78 /* chip select 2 */ -#define GPIO79_nCS_3 79 /* chip select 3 */ -#define GPIO80_nCS_4 80 /* chip select 4 */ -#define GPIO81_NSCLK 81 /* NSSP clock */ -#define GPIO81_CIF_DD_0 81 /* Camera data pin 0 */ -#define GPIO82_NSFRM 82 /* NSSP Frame */ -#define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ -#define GPIO83_NSTXD 83 /* NSSP transmit */ -#define GPIO83_CIF_DD_4 83 /* Camera data pin 4 */ -#define GPIO84_NSRXD 84 /* NSSP receive */ -#define GPIO84_CIF_FV 84 /* Camera frame start signal */ -#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ -#define GPIO85_CIF_LV 85 /* Camera line start signal */ -#define GPIO90_CIF_DD_4 90 /* Camera data pin 4 */ -#define GPIO91_CIF_DD_5 91 /* Camera data pin 5 */ -#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ -#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */ -#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */ -#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */ -#define GPIO96_FFRXD 96 /* FFUART recieve */ -#define GPIO98_FFRTS 98 /* FFUART request to send */ -#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */ -#define GPIO99_FFTXD 99 /* FFUART transmit data */ -#define GPIO100_FFCTS 100 /* FFUART Clear to send */ -#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ -#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */ -#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */ -#define GPIO105_CIF_DD_1 105 /* Camera data pin 1 */ -#define GPIO106_CIF_DD_9 106 /* Camera data pin 9 */ -#define GPIO107_CIF_DD_8 107 /* Camera data pin 8 */ -#define GPIO108_CIF_DD_7 108 /* Camera data pin 7 */ -#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ -#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ -#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ -#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ -#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ -#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ -#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ -#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ -#define GPIO114_CIF_DD_1 114 /* Camera data pin 1 */ -#define GPIO115_CIF_DD_3 115 /* Camera data pin 3 */ -#define GPIO116_CIF_DD_2 116 /* Camera data pin 2 */ - -/* GPIO alternate function mode & direction */ - -#define GPIO_IN 0x000 -#define GPIO_OUT 0x080 -#define GPIO_ALT_FN_1_IN 0x100 -#define GPIO_ALT_FN_1_OUT 0x180 -#define GPIO_ALT_FN_2_IN 0x200 -#define GPIO_ALT_FN_2_OUT 0x280 -#define GPIO_ALT_FN_3_IN 0x300 -#define GPIO_ALT_FN_3_OUT 0x380 -#define GPIO_MD_MASK_NR 0x07f -#define GPIO_MD_MASK_DIR 0x080 -#define GPIO_MD_MASK_FN 0x300 -#define GPIO_DFLT_LOW 0x400 -#define GPIO_DFLT_HIGH 0x800 - -#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) -#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) -#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) -#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) -#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) -#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) -#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) -#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) -#define GPIO12_CIF_DD_7_MD (12 | GPIO_ALT_FN_2_IN) -#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) -#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) -#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) -#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) -#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) -#define GPIO17_CIF_DD_6_MD (17 | GPIO_ALT_FN_2_IN) -#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) -#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) -#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) -#define GPIO23_CIF_MCLK_MD (23 | GPIO_ALT_FN_1_OUT) -#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) -#define GPIO24_CIF_FV_MD (24 | GPIO_ALT_FN_1_OUT) -#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) -#define GPIO25_CIF_LV_MD (25 | GPIO_ALT_FN_1_OUT) -#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) -#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) -#define GPIO26_CIF_PCLK_MD (26 | GPIO_ALT_FN_2_IN) -#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) -#define GPIO27_CIF_DD_0_MD (27 | GPIO_ALT_FN_3_IN) -#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) -#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) -#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) -#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) -#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) -#define GPIO32_MMCCLK_MD (32 | GPIO_ALT_FN_2_OUT) -#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) -#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) -#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) -#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) -#define GPIO35_KP_MKOUT6_MD (35 | GPIO_ALT_FN_2_OUT) -#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) -#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) -#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) -#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) -#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) -#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) -#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) -#define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) -#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) -#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) -#define GPIO42_CIF_MCLK_MD (42 | GPIO_ALT_FN_3_OUT) -#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) -#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO43_CIF_FV_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) -#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) -#define GPIO44_CIF_LV_MD (44 | GPIO_ALT_FN_3_OUT) -#define GPIO45_CIF_PCLK_MD (45 | GPIO_ALT_FN_3_IN) -#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) -#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) -#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) -#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) -#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) -#define GPIO47_CIF_DD_0_MD (47 | GPIO_ALT_FN_1_IN) -#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) -#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) -#define GPIO48_CIF_DD_5_MD (48 | GPIO_ALT_FN_1_IN) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) -#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) -#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) -#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) -#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) -#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) -#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) -#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) -#define GPIO52_CIF_DD_4_MD (52 | GPIO_ALT_FN_1_IN) -#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) -#define GPIO53_CIF_MCLK_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) -#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_CIF_PCLK_MD (54 | GPIO_ALT_FN_3_IN) -#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) -#define GPIO55_CIF_DD_1_MD (55 | GPIO_ALT_FN_1_IN) -#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) -#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) -#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) -#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) -#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) -#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) -#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) -#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) -#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) -#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) -#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) -#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) -#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) -#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) -#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) -#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) -#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) -#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) -#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) -#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) -#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) -#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) -#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) -#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) -#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) -#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) -#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) -#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) -#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) -#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nPCE_2_MD (78 | GPIO_ALT_FN_1_OUT) -#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) -#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) -#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) -#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) -#define GPIO81_CIF_DD_0_MD (81 | GPIO_ALT_FN_2_IN) -#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) -#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) -#define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) -#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) -#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) -#define GPIO83_CIF_DD_4_MD (83 | GPIO_ALT_FN_3_IN) -#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) -#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) -#define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) -#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) -#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) -#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) -#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN) -#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT) -#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN) -#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN) -#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) -#define GPIO93_CIF_DD_6_MD (93 | GPIO_ALT_FN_2_IN) -#define GPIO94_CIF_DD_5_MD (94 | GPIO_ALT_FN_2_IN) -#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN) -#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) -#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) -#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN) -#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) -#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN) -#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT) -#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT) -#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) -#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) -#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) -#define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) -#define GPIO103_CIF_DD_3_MD (103 | GPIO_ALT_FN_1_IN) -#define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) -#define GPIO104_CIF_DD_2_MD (104 | GPIO_ALT_FN_1_IN) -#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) -#define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) -#define GPIO105_CIF_DD_1_MD (105 | GPIO_ALT_FN_1_IN) -#define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) -#define GPIO106_CIF_DD_9_MD (106 | GPIO_ALT_FN_1_IN) -#define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) -#define GPIO107_CIF_DD_8_MD (107 | GPIO_ALT_FN_1_IN) -#define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) -#define GPIO108_CIF_DD_7_MD (108 | GPIO_ALT_FN_1_IN) -#define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) -#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) -#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) -#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) -#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) -#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) - -/* - * Handy routine to set GPIO alternate functions - */ -extern int pxa_gpio_mode( int gpio_mode ); - -#endif /* __ASM_ARCH_PXA2XX_GPIO_H */ diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h deleted file mode 100644 index be1be5b6db51..000000000000 --- a/arch/arm/mach-pxa/include/mach/ssp.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * ssp.h - * - * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver supports the following PXA CPU/SSP ports:- - * - * PXA250 SSP - * PXA255 SSP, NSSP - * PXA26x SSP, NSSP, ASSP - * PXA27x SSP1, SSP2, SSP3 - * PXA3xx SSP1, SSP2, SSP3, SSP4 - */ - -#ifndef __ASM_ARCH_SSP_H -#define __ASM_ARCH_SSP_H - -#include <linux/list.h> -#include <linux/io.h> - -enum pxa_ssp_type { - SSP_UNDEFINED = 0, - PXA25x_SSP, /* pxa 210, 250, 255, 26x */ - PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ - PXA27x_SSP, -}; - -struct ssp_device { - struct platform_device *pdev; - struct list_head node; - - struct clk *clk; - void __iomem *mmio_base; - unsigned long phys_base; - - const char *label; - int port_id; - int type; - int use_count; - int irq; - int drcmr_rx; - int drcmr_tx; -}; - -#ifdef CONFIG_PXA_SSP_LEGACY -/* - * SSP initialisation flags - */ -#define SSP_NO_IRQ 0x1 /* don't register an irq handler in SSP driver */ - -struct ssp_state { - u32 cr0; - u32 cr1; - u32 to; - u32 psp; -}; - -struct ssp_dev { - struct ssp_device *ssp; - u32 port; - u32 mode; - u32 flags; - u32 psp_flags; - u32 speed; - int irq; -}; - -int ssp_write_word(struct ssp_dev *dev, u32 data); -int ssp_read_word(struct ssp_dev *dev, u32 *data); -int ssp_flush(struct ssp_dev *dev); -void ssp_enable(struct ssp_dev *dev); -void ssp_disable(struct ssp_dev *dev); -void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp); -void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp); -int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags); -int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed); -void ssp_exit(struct ssp_dev *dev); -#endif /* CONFIG_PXA_SSP_LEGACY */ - -/** - * ssp_write_reg - Write to a SSP register - * - * @dev: SSP device to access - * @reg: Register to write to - * @val: Value to be written. - */ -static inline void ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val) -{ - __raw_writel(val, dev->mmio_base + reg); -} - -/** - * ssp_read_reg - Read from a SSP register - * - * @dev: SSP device to access - * @reg: Register to read from - */ -static inline u32 ssp_read_reg(struct ssp_device *dev, u32 reg) -{ - return __raw_readl(dev->mmio_base + reg); -} - -struct ssp_device *ssp_request(int port, const char *label); -void ssp_free(struct ssp_device *); -#endif /* __ASM_ARCH_SSP_H */ diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 4df2d38507dc..1bbd1f2e4beb 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -167,7 +167,7 @@ #define TOSA_KEY_SYNC KEY_102ND /* ??? */ -#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES +#ifndef CONFIG_TOSA_USE_EXT_KEYCODES #define TOSA_KEY_RECORD KEY_YEN #define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA #define TOSA_KEY_CANCEL KEY_ESC diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/include/mach/vpac270.h new file mode 100644 index 000000000000..7bfa3dd0fd5e --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/vpac270.h @@ -0,0 +1,42 @@ +/* + * GPIOs and interrupts for Voipac PXA270 + * + * Copyright (C) 2010 + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_VPAC270_H_ +#define _INCLUDE_VPAC270_H_ + +#define GPIO1_VPAC270_USER_BTN 1 + +#define GPIO15_VPAC270_LED_ORANGE 15 + +#define GPIO81_VPAC270_BKL_ON 81 +#define GPIO83_VPAC270_NL_ON 83 + +#define GPIO52_VPAC270_SD_READONLY 52 +#define GPIO53_VPAC270_SD_DETECT_N 53 + +#define GPIO84_VPAC270_PCMCIA_CD 84 +#define GPIO35_VPAC270_PCMCIA_RDY 35 +#define GPIO107_VPAC270_PCMCIA_PPEN 107 +#define GPIO11_VPAC270_PCMCIA_RESET 11 +#define GPIO17_VPAC270_CF_CD 17 +#define GPIO12_VPAC270_CF_RDY 12 +#define GPIO16_VPAC270_CF_RESET 16 + +#define GPIO41_VPAC270_UDC_DETECT 41 + +#define GPIO114_VPAC270_ETH_IRQ 114 + +#define GPIO36_VPAC270_IDE_IRQ 36 + +#define GPIO113_VPAC270_TS_IRQ 113 + +#endif diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h new file mode 100644 index 000000000000..8835c16bc82f --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/z2.h @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-pxa/include/mach/z2.h + * + * Author: Ken McGuire + * Created: Feb 6, 2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ASM_ARCH_ZIPIT2_H +#define ASM_ARCH_ZIPIT2_H + +/* LEDs */ +#define GPIO10_ZIPITZ2_LED_WIFI 10 +#define GPIO85_ZIPITZ2_LED_CHARGED 85 +#define GPIO83_ZIPITZ2_LED_CHARGING 83 + +/* SD/MMC */ +#define GPIO96_ZIPITZ2_SD_DETECT 96 + +/* GPIO Buttons */ +#define GPIO1_ZIPITZ2_POWER_BUTTON 1 +#define GPIO98_ZIPITZ2_LID_BUTTON 98 + +/* Libertas GSPI8686 WiFi */ +#define GPIO14_ZIPITZ2_WIFI_RESET 14 +#define GPIO15_ZIPITZ2_WIFI_POWER 15 +#define GPIO24_ZIPITZ2_WIFI_CS 24 +#define GPIO36_ZIPITZ2_WIFI_IRQ 36 + +/* LCD */ +#define GPIO19_ZIPITZ2_LCD_RESET 19 +#define GPIO88_ZIPITZ2_LCD_CS 88 + +/* MISC GPIOs */ +#define GPIO0_ZIPITZ2_AC_DETECT 0 +#define GPIO37_ZIPITZ2_HEADSET_DETECT 37 + +#endif diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index fa527b258d61..9b9046185b00 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -41,7 +41,6 @@ #include <mach/pxa300.h> #include <mach/pxafb.h> -#include <mach/ssp.h> #include <mach/mmc.h> #include <mach/pxa2xx_spi.h> #include <mach/pxa27x_keypad.h> @@ -272,7 +271,7 @@ static inline void littleton_init_keypad(void) {} #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static struct pxamci_platform_data littleton_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms = 200, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .gpio_card_detect = GPIO_MMC1_CARD_DETECT, .gpio_card_ro = -1, diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 63d65a2a0387..330c3282856e 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -478,7 +478,7 @@ static void lubbock_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data lubbock_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .detect_delay = 1, + .detect_delay_ms = 10, .init = lubbock_mci_init, .get_ro = lubbock_mci_get_ro, .exit = lubbock_mci_exit, diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index cf6b720c055f..1d1419b73457 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -81,6 +81,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c) PGSR(bank) &= ~mask; is_out = 1; break; + case MFP_LPM_INPUT: case MFP_LPM_DEFAULT: break; default: @@ -178,8 +179,17 @@ int gpio_set_wake(unsigned int gpio, unsigned int on) if (!d->valid) return -EINVAL; - if (d->keypad_gpio) - return -EINVAL; + /* Allow keypad GPIOs to wakeup system when + * configured as generic GPIOs. + */ + if (d->keypad_gpio && (MFP_AF(d->config) == 0) && + (d->config & MFP_LPM_CAN_WAKEUP)) { + if (on) + PKWR |= d->mask; + else + PKWR &= ~d->mask; + return 0; + } mux_taken = (PWER & d->mux_mask) & (~d->mask); if (on && mux_taken) @@ -239,21 +249,25 @@ static int pxa27x_pkwr_gpio[] = { int keypad_set_wake(unsigned int on) { unsigned int i, gpio, mask = 0; - - if (!on) { - PKWR = 0; - return 0; - } + struct gpio_desc *d; for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) { gpio = pxa27x_pkwr_gpio[i]; + d = &gpio_desc[gpio]; - if (gpio_desc[gpio].config & MFP_LPM_CAN_WAKEUP) + /* skip if configured as generic GPIO */ + if (MFP_AF(d->config) == 0) + continue; + + if (d->config & MFP_LPM_CAN_WAKEUP) mask |= gpio_desc[gpio].mask; } - PKWR = mask; + if (on) + PKWR |= mask; + else + PKWR &= ~mask; return 0; } @@ -328,6 +342,17 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) { int i; + /* set corresponding PGSR bit of those marked MFP_LPM_KEEP_OUTPUT */ + for (i = 0; i < pxa_last_gpio; i++) { + if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && + (GPDR(i) & GPIO_bit(i))) { + if (GPLR(i) & GPIO_bit(i)) + PGSR(i) |= GPIO_bit(i); + else + PGSR(i) &= ~GPIO_bit(i); + } + } + for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { saved_gafr[0][i] = GAFR_L(i); diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 7a50ed8fce94..d60db87dde08 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -426,6 +426,7 @@ struct gpio_vbus_mach_info gpio_vbus_data = { * to give the card a chance to fully insert/eject. */ static struct pxamci_platform_data mioa701_mci_info = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .gpio_card_detect = GPIO15_SDIO_INSERT, .gpio_card_ro = GPIO78_SDIO_RO, @@ -791,7 +792,6 @@ static void __init mioa701_machine_init(void) mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); bootstrap_init(); set_pxa_fb_info(&mioa701_pxafb_info); - mioa701_mci_info.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&mioa701_mci_info); pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index 8c9c6f0d56bb..462167ac05f9 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -325,7 +325,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = { #if defined(CONFIG_MMC) static struct pxamci_platform_data mxm_8x10_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .detect_delay = 1, + .detect_delay_ms = 10, .gpio_card_detect = MXM_8X10_SD_nCD, .gpio_card_ro = MXM_8X10_SD_WP, .gpio_power = -1 diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index f70c75b38769..1963819dba98 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -168,7 +168,7 @@ static struct pxamci_platform_data palmld_mci_platform_data = { .gpio_card_detect = GPIO_NR_PALMLD_SD_DETECT_N, .gpio_card_ro = GPIO_NR_PALMLD_SD_READONLY, .gpio_power = GPIO_NR_PALMLD_SD_POWER, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index d902a813aae3..5305a3993e69 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -110,7 +110,7 @@ static struct pxamci_platform_data palmt5_mci_platform_data = { .gpio_card_detect = GPIO_NR_PALMT5_SD_DETECT_N, .gpio_card_ro = GPIO_NR_PALMT5_SD_READONLY, .gpio_power = GPIO_NR_PALMT5_SD_POWER, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 717d7a638675..033b567e50bb 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -121,7 +121,7 @@ static struct pxamci_platform_data palmtc_mci_platform_data = { .gpio_power = GPIO_NR_PALMTC_SD_POWER, .gpio_card_ro = GPIO_NR_PALMTC_SD_READONLY, .gpio_card_detect = GPIO_NR_PALMTC_SD_DETECT_N, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 007b58c11f8d..ecc1a401598e 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -170,7 +170,7 @@ static struct pxamci_platform_data palmtx_mci_platform_data = { .gpio_card_detect = GPIO_NR_PALMTX_SD_DETECT_N, .gpio_card_ro = GPIO_NR_PALMTX_SD_READONLY, .gpio_power = GPIO_NR_PALMTX_SD_POWER, - .detect_delay = 20, + .detect_delay_ms = 200, }; /****************************************************************************** diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 9d0ecea1760c..f56ae1008759 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -326,7 +326,7 @@ static void pcm990_mci_exit(struct device *dev, void *data) #define MSECS_PER_JIFFY (1000/HZ) static struct pxamci_platform_data pcm990_mci_platform_data = { - .detect_delay = 250 / MSECS_PER_JIFFY, + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .init = pcm990_mci_init, .setpower = pcm990_mci_setpower, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index d58a52415d75..f4abdaafdac4 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -40,13 +40,12 @@ #include <mach/pxa25x.h> #include <mach/mmc.h> #include <mach/udc.h> -#include <plat/i2c.h> #include <mach/irda.h> #include <mach/poodle.h> #include <mach/pxafb.h> #include <mach/sharpsl.h> -#include <mach/ssp.h> #include <mach/pxa2xx_spi.h> +#include <plat/i2c.h> #include <asm/hardware/scoop.h> #include <asm/hardware/locomo.h> @@ -277,6 +276,7 @@ static void poodle_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data poodle_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = poodle_mci_init, .setpower = poodle_mci_setpower, @@ -450,7 +450,6 @@ static void __init poodle_init(void) set_pxa_fb_parent(&poodle_locomo_device.dev); set_pxa_fb_info(&poodle_fb_info); pxa_set_udc_info(&udc_info); - poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); pxa_set_i2c_info(NULL); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 4d7c03e72504..f544e58e1536 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -29,7 +29,6 @@ #include <mach/ohci.h> #include <mach/pm.h> #include <mach/dma.h> -#include <mach/ssp.h> #include <mach/regs-intc.h> #include <plat/i2c.h> diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index d12667bd9ebe..d4b61b3f08f3 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -714,7 +714,7 @@ static void raumfeld_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data raumfeld_mci_platform_data = { .init = raumfeld_mci_init, .exit = raumfeld_mci_exit, - .detect_delay = 20, + .detect_delay_ms = 200, .gpio_card_detect = -1, .gpio_card_ro = -1, .gpio_power = -1, diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index 1439785d3979..0cc1203c5bef 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -10,29 +10,6 @@ #include <mach/sharpsl_pm.h> /* - * SharpSL SSP Driver - */ -struct corgissp_machinfo { - int port; - int cs_lcdcon; - int cs_ads7846; - int cs_max1111; - int clk_lcdcon; - int clk_ads7846; - int clk_max1111; -}; - -void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo); - - -/* - * SharpSL/Corgi LCD Driver - */ -void corgi_lcdtg_suspend(void); -void corgi_lcdtg_hw_init(int mode); - - -/* * SharpSL Battery/PM Driver */ #define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 463d874bb867..cb4767251f3c 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -28,7 +28,6 @@ #include <asm/mach-types.h> #include <mach/pm.h> #include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> #include <mach/regs-rtc.h> #include <mach/sharpsl.h> #include <mach/sharpsl_pm.h> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 01bdd7500df4..4d2413ed0ffa 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -86,6 +86,7 @@ static unsigned long spitz_pin_config[] __initdata = { /* GPIOs */ GPIO9_GPIO, /* SPITZ_GPIO_nSD_DETECT */ + GPIO16_GPIO, /* SPITZ_GPIO_SYNC */ GPIO81_GPIO, /* SPITZ_GPIO_nSD_WP */ GPIO41_GPIO, /* SPITZ_GPIO_USB_CONNECT */ GPIO37_GPIO, /* SPITZ_GPIO_USB_HOST */ @@ -119,7 +120,8 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO117_I2C_SCL, GPIO118_I2C_SDA, - GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, + GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* SPITZ_GPIO_KEY_INT */ + GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */ }; /* @@ -537,6 +539,7 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) } static struct pxamci_platform_data spitz_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .setpower = spitz_mci_setpower, .gpio_card_detect = SPITZ_GPIO_nSD_DETECT, @@ -757,7 +760,6 @@ static void __init common_init(void) spitz_init_spi(); platform_add_devices(devices, ARRAY_SIZE(devices)); - spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&spitz_mci_platform_data); pxa_set_ohci_info(&spitz_ohci_platform_data); pxa_set_ficp_info(&spitz_ficp_platform_data); diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index fc5a70c40358..4209ddf6da61 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -24,9 +24,10 @@ #include <mach/sharpsl.h> #include <mach/spitz.h> -#include <mach/pxa2xx-regs.h> -#include <mach/pxa2xx-gpio.h> +#include <mach/pxa27x.h> + #include "sharpsl.h" +#include "generic.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ #define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ @@ -37,10 +38,17 @@ static int spitz_last_ac_status; +static struct gpio spitz_charger_gpios[] = { + { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" }, + { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" }, + { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, + { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" }, + { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, +}; + static void spitz_charger_init(void) { - pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN); + gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios)); } static void spitz_measure_temp(int on) @@ -76,6 +84,11 @@ static void spitz_discharge1(int on) gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } +static unsigned long gpio18_config[] = { + GPIO18_RDY, + GPIO18_GPIO, +}; + static void spitz_presuspend(void) { spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); @@ -97,7 +110,9 @@ static void spitz_presuspend(void) PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); - pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH); + pxa2xx_mfp_config(&gpio18_config[0], 1); + gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); + gpio_free(18); PRER = GPIO_bit(SPITZ_GPIO_KEY_INT); PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); @@ -114,8 +129,7 @@ static void spitz_presuspend(void) static void spitz_postsuspend(void) { - pxa_gpio_mode(GPIO18_RDY_MD); - pxa_gpio_mode(10 | GPIO_IN); + pxa2xx_mfp_config(&gpio18_config[1], 1); } static int spitz_should_wakeup(unsigned int resume_on_alarm) diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c deleted file mode 100644 index a81d6dbf662d..000000000000 --- a/arch/arm/mach-pxa/ssp.c +++ /dev/null @@ -1,510 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/ssp.c - * - * based on linux/arch/arm/mach-sa1100/ssp.c by Russell King - * - * Copyright (C) 2003 Russell King. - * Copyright (C) 2003 Wolfson Microelectronics PLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * PXA2xx SSP driver. This provides the generic core for simple - * IO-based SSP applications and allows easy port setup for DMA access. - * - * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/mutex.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <mach/hardware.h> -#include <mach/ssp.h> -#include <mach/regs-ssp.h> - -#ifdef CONFIG_PXA_SSP_LEGACY - -#define TIMEOUT 100000 - -static irqreturn_t ssp_interrupt(int irq, void *dev_id) -{ - struct ssp_dev *dev = dev_id; - struct ssp_device *ssp = dev->ssp; - unsigned int status; - - status = __raw_readl(ssp->mmio_base + SSSR); - __raw_writel(status, ssp->mmio_base + SSSR); - - if (status & SSSR_ROR) - printk(KERN_WARNING "SSP(%d): receiver overrun\n", dev->port); - - if (status & SSSR_TUR) - printk(KERN_WARNING "SSP(%d): transmitter underrun\n", dev->port); - - if (status & SSSR_BCE) - printk(KERN_WARNING "SSP(%d): bit count error\n", dev->port); - - return IRQ_HANDLED; -} - -/** - * ssp_write_word - write a word to the SSP port - * @data: 32-bit, MSB justified data to write. - * - * Wait for a free entry in the SSP transmit FIFO, and write a data - * word to the SSP port. - * - * The caller is expected to perform the necessary locking. - * - * Returns: - * %-ETIMEDOUT timeout occurred - * 0 success - */ -int ssp_write_word(struct ssp_dev *dev, u32 data) -{ - struct ssp_device *ssp = dev->ssp; - int timeout = TIMEOUT; - - while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_TNF)) { - if (!--timeout) - return -ETIMEDOUT; - cpu_relax(); - } - - __raw_writel(data, ssp->mmio_base + SSDR); - - return 0; -} - -/** - * ssp_read_word - read a word from the SSP port - * - * Wait for a data word in the SSP receive FIFO, and return the - * received data. Data is LSB justified. - * - * Note: Currently, if data is not expected to be received, this - * function will wait for ever. - * - * The caller is expected to perform the necessary locking. - * - * Returns: - * %-ETIMEDOUT timeout occurred - * 32-bit data success - */ -int ssp_read_word(struct ssp_dev *dev, u32 *data) -{ - struct ssp_device *ssp = dev->ssp; - int timeout = TIMEOUT; - - while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE)) { - if (!--timeout) - return -ETIMEDOUT; - cpu_relax(); - } - - *data = __raw_readl(ssp->mmio_base + SSDR); - return 0; -} - -/** - * ssp_flush - flush the transmit and receive FIFOs - * - * Wait for the SSP to idle, and ensure that the receive FIFO - * is empty. - * - * The caller is expected to perform the necessary locking. - */ -int ssp_flush(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - int timeout = TIMEOUT * 2; - - /* ensure TX FIFO is empty instead of not full */ - if (cpu_is_pxa3xx()) { - while (__raw_readl(ssp->mmio_base + SSSR) & 0xf00) { - if (!--timeout) - return -ETIMEDOUT; - cpu_relax(); - } - timeout = TIMEOUT * 2; - } - - do { - while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE) { - if (!--timeout) - return -ETIMEDOUT; - (void)__raw_readl(ssp->mmio_base + SSDR); - } - if (!--timeout) - return -ETIMEDOUT; - } while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_BSY); - - return 0; -} - -/** - * ssp_enable - enable the SSP port - * - * Turn on the SSP port. - */ -void ssp_enable(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - uint32_t sscr0; - - sscr0 = __raw_readl(ssp->mmio_base + SSCR0); - sscr0 |= SSCR0_SSE; - __raw_writel(sscr0, ssp->mmio_base + SSCR0); -} - -/** - * ssp_disable - shut down the SSP port - * - * Turn off the SSP port, optionally powering it down. - */ -void ssp_disable(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - uint32_t sscr0; - - sscr0 = __raw_readl(ssp->mmio_base + SSCR0); - sscr0 &= ~SSCR0_SSE; - __raw_writel(sscr0, ssp->mmio_base + SSCR0); -} - -/** - * ssp_save_state - save the SSP configuration - * @ssp: pointer to structure to save SSP configuration - * - * Save the configured SSP state for suspend. - */ -void ssp_save_state(struct ssp_dev *dev, struct ssp_state *state) -{ - struct ssp_device *ssp = dev->ssp; - - state->cr0 = __raw_readl(ssp->mmio_base + SSCR0); - state->cr1 = __raw_readl(ssp->mmio_base + SSCR1); - state->to = __raw_readl(ssp->mmio_base + SSTO); - state->psp = __raw_readl(ssp->mmio_base + SSPSP); - - ssp_disable(dev); -} - -/** - * ssp_restore_state - restore a previously saved SSP configuration - * @ssp: pointer to configuration saved by ssp_save_state - * - * Restore the SSP configuration saved previously by ssp_save_state. - */ -void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *state) -{ - struct ssp_device *ssp = dev->ssp; - uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE; - - __raw_writel(sssr, ssp->mmio_base + SSSR); - - __raw_writel(state->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0); - __raw_writel(state->cr1, ssp->mmio_base + SSCR1); - __raw_writel(state->to, ssp->mmio_base + SSTO); - __raw_writel(state->psp, ssp->mmio_base + SSPSP); - __raw_writel(state->cr0, ssp->mmio_base + SSCR0); -} - -/** - * ssp_config - configure SSP port settings - * @mode: port operating mode - * @flags: port config flags - * @psp_flags: port PSP config flags - * @speed: port speed - * - * Port MUST be disabled by ssp_disable before making any config changes. - */ -int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed) -{ - struct ssp_device *ssp = dev->ssp; - - dev->mode = mode; - dev->flags = flags; - dev->psp_flags = psp_flags; - dev->speed = speed; - - /* set up port type, speed, port settings */ - __raw_writel((dev->speed | dev->mode), ssp->mmio_base + SSCR0); - __raw_writel(dev->flags, ssp->mmio_base + SSCR1); - __raw_writel(dev->psp_flags, ssp->mmio_base + SSPSP); - - return 0; -} - -/** - * ssp_init - setup the SSP port - * - * initialise and claim resources for the SSP port. - * - * Returns: - * %-ENODEV if the SSP port is unavailable - * %-EBUSY if the resources are already in use - * %0 on success - */ -int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags) -{ - struct ssp_device *ssp; - int ret; - - ssp = ssp_request(port, "SSP"); - if (ssp == NULL) - return -ENODEV; - - dev->ssp = ssp; - dev->port = port; - - /* do we need to get irq */ - if (!(init_flags & SSP_NO_IRQ)) { - ret = request_irq(ssp->irq, ssp_interrupt, - 0, "SSP", dev); - if (ret) - goto out_region; - dev->irq = ssp->irq; - } else - dev->irq = NO_IRQ; - - /* turn on SSP port clock */ - clk_enable(ssp->clk); - return 0; - -out_region: - ssp_free(ssp); - return ret; -} - -/** - * ssp_exit - undo the effects of ssp_init - * - * release and free resources for the SSP port. - */ -void ssp_exit(struct ssp_dev *dev) -{ - struct ssp_device *ssp = dev->ssp; - - ssp_disable(dev); - if (dev->irq != NO_IRQ) - free_irq(dev->irq, dev); - clk_disable(ssp->clk); - ssp_free(ssp); -} -#endif /* CONFIG_PXA_SSP_LEGACY */ - -static DEFINE_MUTEX(ssp_lock); -static LIST_HEAD(ssp_list); - -struct ssp_device *ssp_request(int port, const char *label) -{ - struct ssp_device *ssp = NULL; - - mutex_lock(&ssp_lock); - - list_for_each_entry(ssp, &ssp_list, node) { - if (ssp->port_id == port && ssp->use_count == 0) { - ssp->use_count++; - ssp->label = label; - break; - } - } - - mutex_unlock(&ssp_lock); - - if (&ssp->node == &ssp_list) - return NULL; - - return ssp; -} -EXPORT_SYMBOL(ssp_request); - -void ssp_free(struct ssp_device *ssp) -{ - mutex_lock(&ssp_lock); - if (ssp->use_count) { - ssp->use_count--; - ssp->label = NULL; - } else - dev_err(&ssp->pdev->dev, "device already free\n"); - mutex_unlock(&ssp_lock); -} -EXPORT_SYMBOL(ssp_free); - -static int __devinit ssp_probe(struct platform_device *pdev) -{ - const struct platform_device_id *id = platform_get_device_id(pdev); - struct resource *res; - struct ssp_device *ssp; - int ret = 0; - - ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL); - if (ssp == NULL) { - dev_err(&pdev->dev, "failed to allocate memory"); - return -ENOMEM; - } - ssp->pdev = pdev; - - ssp->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(ssp->clk)) { - ret = PTR_ERR(ssp->clk); - goto err_free; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "no memory resource defined\n"); - ret = -ENODEV; - goto err_free_clk; - } - - res = request_mem_region(res->start, res->end - res->start + 1, - pdev->name); - if (res == NULL) { - dev_err(&pdev->dev, "failed to request memory resource\n"); - ret = -EBUSY; - goto err_free_clk; - } - - ssp->phys_base = res->start; - - ssp->mmio_base = ioremap(res->start, res->end - res->start + 1); - if (ssp->mmio_base == NULL) { - dev_err(&pdev->dev, "failed to ioremap() registers\n"); - ret = -ENODEV; - goto err_free_mem; - } - - ssp->irq = platform_get_irq(pdev, 0); - if (ssp->irq < 0) { - dev_err(&pdev->dev, "no IRQ resource defined\n"); - ret = -ENODEV; - goto err_free_io; - } - - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (res == NULL) { - dev_err(&pdev->dev, "no SSP RX DRCMR defined\n"); - ret = -ENODEV; - goto err_free_io; - } - ssp->drcmr_rx = res->start; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (res == NULL) { - dev_err(&pdev->dev, "no SSP TX DRCMR defined\n"); - ret = -ENODEV; - goto err_free_io; - } - ssp->drcmr_tx = res->start; - - /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id - * starts from 0, do a translation here - */ - ssp->port_id = pdev->id + 1; - ssp->use_count = 0; - ssp->type = (int)id->driver_data; - - mutex_lock(&ssp_lock); - list_add(&ssp->node, &ssp_list); - mutex_unlock(&ssp_lock); - - platform_set_drvdata(pdev, ssp); - return 0; - -err_free_io: - iounmap(ssp->mmio_base); -err_free_mem: - release_mem_region(res->start, res->end - res->start + 1); -err_free_clk: - clk_put(ssp->clk); -err_free: - kfree(ssp); - return ret; -} - -static int __devexit ssp_remove(struct platform_device *pdev) -{ - struct resource *res; - struct ssp_device *ssp; - - ssp = platform_get_drvdata(pdev); - if (ssp == NULL) - return -ENODEV; - - iounmap(ssp->mmio_base); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start + 1); - - clk_put(ssp->clk); - - mutex_lock(&ssp_lock); - list_del(&ssp->node); - mutex_unlock(&ssp_lock); - - kfree(ssp); - return 0; -} - -static const struct platform_device_id ssp_id_table[] = { - { "pxa25x-ssp", PXA25x_SSP }, - { "pxa25x-nssp", PXA25x_NSSP }, - { "pxa27x-ssp", PXA27x_SSP }, - { }, -}; - -static struct platform_driver ssp_driver = { - .probe = ssp_probe, - .remove = __devexit_p(ssp_remove), - .driver = { - .owner = THIS_MODULE, - .name = "pxa2xx-ssp", - }, - .id_table = ssp_id_table, -}; - -static int __init pxa_ssp_init(void) -{ - return platform_driver_register(&ssp_driver); -} - -static void __exit pxa_ssp_exit(void) -{ - platform_driver_unregister(&ssp_driver); -} - -arch_initcall(pxa_ssp_init); -module_exit(pxa_ssp_exit); - -#ifdef CONFIG_PXA_SSP_LEGACY -EXPORT_SYMBOL(ssp_write_word); -EXPORT_SYMBOL(ssp_read_word); -EXPORT_SYMBOL(ssp_flush); -EXPORT_SYMBOL(ssp_enable); -EXPORT_SYMBOL(ssp_disable); -EXPORT_SYMBOL(ssp_save_state); -EXPORT_SYMBOL(ssp_restore_state); -EXPORT_SYMBOL(ssp_init); -EXPORT_SYMBOL(ssp_exit); -EXPORT_SYMBOL(ssp_config); -#endif - -MODULE_DESCRIPTION("PXA SSP driver"); -MODULE_AUTHOR("Liam Girdwood"); -MODULE_LICENSE("GPL"); - diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 2041eb1d90ba..af40d2a12d37 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -464,8 +464,6 @@ static struct platform_device smc91x_device = { -static struct pxamci_platform_data stargate2_mci_platform_data; - /* * The card detect interrupt isn't debounced so we delay it by 250ms * to give the card a chance to fully insert / eject. @@ -489,8 +487,6 @@ static int stargate2_mci_init(struct device *dev, goto free_power_en; } gpio_direction_input(SG2_GPIO_nSD_DETECT); - /* Delay to allow for full insertion */ - stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250); err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), stargate2_detect_int, @@ -529,6 +525,7 @@ static void stargate2_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data stargate2_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .init = stargate2_mci_init, .setpower = stargate2_mci_setpower, diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index ad552791c4ce..7512b822c6ca 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -275,6 +275,7 @@ static void tosa_mci_exit(struct device *dev, void *data) } static struct pxamci_platform_data tosa_mci_platform_data = { + .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = tosa_mci_init, .exit = tosa_mci_exit, @@ -926,7 +927,6 @@ static void __init tosa_init(void) dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12); dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); - tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 797f2544d0ce..69689112eae7 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -349,7 +349,7 @@ static void trizeps4_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data trizeps4_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .detect_delay = 1, + .detect_delay_ms= 10, .init = trizeps4_mci_init, .exit = trizeps4_mci_exit, .get_ro = NULL, /* write-protection not supported */ diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c new file mode 100644 index 000000000000..9884fa978f16 --- /dev/null +++ b/arch/arm/mach-pxa/vpac270.c @@ -0,0 +1,615 @@ +/* + * Hardware definitions for Voipac PXA270 + * + * Copyright (C) 2010 + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/sysdev.h> +#include <linux/usb/gpio_vbus.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/onenand.h> +#include <linux/dm9000.h> +#include <linux/ucb1400.h> +#include <linux/ata_platform.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pxa27x.h> +#include <mach/audio.h> +#include <mach/vpac270.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/ohci.h> +#include <mach/pxa27x-udc.h> +#include <mach/udc.h> + +#include <plat/i2c.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long vpac270_pin_config[] __initdata = { + /* MMC */ + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + GPIO53_GPIO, /* SD detect */ + GPIO52_GPIO, /* SD r/o switch */ + + /* GPIO KEYS */ + GPIO1_GPIO, /* USER BTN */ + + /* LEDs */ + GPIO15_GPIO, /* orange led */ + + /* FFUART */ + GPIO34_FFUART_RXD, + GPIO39_FFUART_TXD, + GPIO27_FFUART_RTS, + GPIO100_FFUART_CTS, + GPIO33_FFUART_DSR, + GPIO40_FFUART_DTR, + GPIO10_FFUART_DCD, + GPIO38_FFUART_RI, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO86_LCD_LDD_16, + GPIO87_LCD_LDD_17, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* PCMCIA */ + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO55_nPREG, + GPIO57_nIOIS16, + GPIO56_nPWAIT, + GPIO104_PSKTSEL, + GPIO84_GPIO, /* PCMCIA CD */ + GPIO35_GPIO, /* PCMCIA RDY */ + GPIO107_GPIO, /* PCMCIA PPEN */ + GPIO11_GPIO, /* PCMCIA RESET */ + GPIO17_GPIO, /* CF CD */ + GPIO12_GPIO, /* CF RDY */ + GPIO16_GPIO, /* CF RESET */ + + /* UHC */ + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + GPIO119_USBH2_PWR, + GPIO120_USBH2_PEN, + + /* UDC */ + GPIO41_GPIO, + + /* Ethernet */ + GPIO114_GPIO, /* IRQ */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + GPIO95_AC97_nRESET, + GPIO98_AC97_SYSCLK, + GPIO113_GPIO, /* TS IRQ */ + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* IDE */ + GPIO36_GPIO, /* IDE IRQ */ + GPIO80_DREQ_1, +}; + +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition vpac270_nor_partitions[] = { + { + .name = "Flash", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data vpac270_flash_data[] = { + { + .width = 2, /* bankwidth in bytes */ + .parts = vpac270_nor_partitions, + .nr_parts = ARRAY_SIZE(vpac270_nor_partitions) + } +}; + +static struct resource vpac270_flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device vpac270_flash = { + .name = "physmap-flash", + .id = 0, + .resource = &vpac270_flash_resource, + .num_resources = 1, + .dev = { + .platform_data = vpac270_flash_data, + }, +}; +static void __init vpac270_nor_init(void) +{ + platform_device_register(&vpac270_flash); +} +#else +static inline void vpac270_nor_init(void) {} +#endif + +/****************************************************************************** + * OneNAND Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE) +static struct mtd_partition vpac270_onenand_partitions[] = { + { + .name = "Flash", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct onenand_platform_data vpac270_onenand_info = { + .parts = vpac270_onenand_partitions, + .nr_parts = ARRAY_SIZE(vpac270_onenand_partitions), +}; + +static struct resource vpac270_onenand_resources[] = { + [0] = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_1M, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device vpac270_onenand = { + .name = "onenand-flash", + .id = -1, + .resource = vpac270_onenand_resources, + .num_resources = ARRAY_SIZE(vpac270_onenand_resources), + .dev = { + .platform_data = &vpac270_onenand_info, + }, +}; + +static void __init vpac270_onenand_init(void) +{ + platform_device_register(&vpac270_onenand); +} +#else +static void __init vpac270_onenand_init(void) {} +#endif + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data vpac270_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N, + .gpio_card_ro = GPIO52_VPAC270_SD_READONLY, + .detect_delay_ms = 200, +}; + +static void __init vpac270_mmc_init(void) +{ + pxa_set_mci_info(&vpac270_mci_platform_data); +} +#else +static inline void vpac270_mmc_init(void) {} +#endif + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button vpac270_pxa_buttons[] = { + {KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"}, +}; + +static struct gpio_keys_platform_data vpac270_pxa_keys_data = { + .buttons = vpac270_pxa_buttons, + .nbuttons = ARRAY_SIZE(vpac270_pxa_buttons), +}; + +static struct platform_device vpac270_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &vpac270_pxa_keys_data, + }, +}; + +static void __init vpac270_keys_init(void) +{ + platform_device_register(&vpac270_pxa_keys); +} +#else +static inline void vpac270_keys_init(void) {} +#endif + +/****************************************************************************** + * LED + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led vpac270_gpio_leds[] = { +{ + .name = "vpac270:orange:user", + .default_trigger = "none", + .gpio = GPIO15_VPAC270_LED_ORANGE, + .active_low = 1, +} +}; + +static struct gpio_led_platform_data vpac270_gpio_led_info = { + .leds = vpac270_gpio_leds, + .num_leds = ARRAY_SIZE(vpac270_gpio_leds), +}; + +static struct platform_device vpac270_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &vpac270_gpio_led_info, + } +}; + +static void __init vpac270_leds_init(void) +{ + platform_device_register(&vpac270_leds); +} +#else +static inline void vpac270_leds_init(void) {} +#endif + +/****************************************************************************** + * USB Host + ******************************************************************************/ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +static int vpac270_ohci_init(struct device *dev) +{ + UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; + return 0; +} + +static struct pxaohci_platform_data vpac270_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .flags = ENABLE_PORT1 | ENABLE_PORT2 | + POWER_CONTROL_LOW | POWER_SENSE_LOW, + .init = vpac270_ohci_init, +}; + +static void __init vpac270_uhc_init(void) +{ + pxa_set_ohci_info(&vpac270_ohci_info); +} +#else +static inline void vpac270_uhc_init(void) {} +#endif + +/****************************************************************************** + * USB Gadget + ******************************************************************************/ +#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) +static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = { + .gpio_vbus = GPIO41_VPAC270_UDC_DETECT, + .gpio_pullup = -1, +}; + +static struct platform_device vpac270_gpio_vbus = { + .name = "gpio-vbus", + .id = -1, + .dev = { + .platform_data = &vpac270_gpio_vbus_info, + }, +}; + +static void vpac270_udc_command(int cmd) +{ + if (cmd == PXA2XX_UDC_CMD_CONNECT) + UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE; + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) + UP2OCR = UP2OCR_HXOE; +} + +static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = { + .udc_command = vpac270_udc_command, + .gpio_pullup = -1, +}; + +static void __init vpac270_udc_init(void) +{ + pxa_set_udc_info(&vpac270_udc_info); + platform_device_register(&vpac270_gpio_vbus); +} +#else +static inline void vpac270_udc_init(void) {} +#endif + +/****************************************************************************** + * Ethernet + ******************************************************************************/ +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource vpac270_dm9000_resources[] = { + [0] = { + .start = PXA_CS2_PHYS + 0x300, + .end = PXA_CS2_PHYS + 0x303, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS2_PHYS + 0x304, + .end = PXA_CS2_PHYS + 0x343, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), + .end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct dm9000_plat_data vpac270_dm9000_platdata = { + .flags = DM9000_PLATF_32BITONLY, +}; + +static struct platform_device vpac270_dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(vpac270_dm9000_resources), + .resource = vpac270_dm9000_resources, + .dev = { + .platform_data = &vpac270_dm9000_platdata, + } +}; + +static void __init vpac270_eth_init(void) +{ + platform_device_register(&vpac270_dm9000_device); +} +#else +static inline void vpac270_eth_init(void) {} +#endif + +/****************************************************************************** + * Audio and Touchscreen + ******************************************************************************/ +#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ + defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) +static pxa2xx_audio_ops_t vpac270_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct ucb1400_pdata vpac270_ucb1400_pdata = { + .irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ), +}; + +static struct platform_device vpac270_ucb1400_device = { + .name = "ucb1400_core", + .id = -1, + .dev = { + .platform_data = &vpac270_ucb1400_pdata, + }, +}; + +static void __init vpac270_ts_init(void) +{ + pxa_set_ac97_info(&vpac270_ac97_pdata); + platform_device_register(&vpac270_ucb1400_device); +} +#else +static inline void vpac270_ts_init(void) {} +#endif + +/****************************************************************************** + * RTC + ******************************************************************************/ +#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE) +static struct i2c_board_info __initdata vpac270_i2c_devs[] = { + { + I2C_BOARD_INFO("ds1339", 0x68), + }, +}; + +static void __init vpac270_rtc_init(void) +{ + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs)); +} +#else +static inline void vpac270_rtc_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info vpac270_lcd_modes[] = { +{ + .pixclock = 57692, + .xres = 640, + .yres = 480, + .bpp = 32, + .depth = 18, + + .left_margin = 144, + .right_margin = 32, + .upper_margin = 13, + .lower_margin = 30, + + .hsync_len = 32, + .vsync_len = 2, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}, +}; + +static struct pxafb_mach_info vpac270_lcd_screen = { + .modes = vpac270_lcd_modes, + .num_modes = ARRAY_SIZE(vpac270_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_18BPP, +}; + +static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info) +{ + gpio_set_value(GPIO81_VPAC270_BKL_ON, on); +} + +static void __init vpac270_lcd_init(void) +{ + int ret; + + ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON"); + if (ret) { + pr_err("Requesting BKL-ON GPIO failed!\n"); + goto err; + } + + ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1); + if (ret) { + pr_err("Setting BKL-ON GPIO direction failed!\n"); + goto err2; + } + + vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power; + set_pxa_fb_info(&vpac270_lcd_screen); + return; + +err2: + gpio_free(GPIO81_VPAC270_BKL_ON); +err: + return; +} +#else +static inline void vpac270_lcd_init(void) {} +#endif + +/****************************************************************************** + * PATA IDE + ******************************************************************************/ +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +static struct pata_platform_info vpac270_pata_pdata = { + .ioport_shift = 1, + .irq_flags = IRQF_TRIGGER_RISING, +}; + +static struct resource vpac270_ide_resources[] = { + [0] = { /* I/O Base address */ + .start = PXA_CS3_PHYS + 0x120, + .end = PXA_CS3_PHYS + 0x13f, + .flags = IORESOURCE_MEM + }, + [1] = { /* CTL Base address */ + .start = PXA_CS3_PHYS + 0x15c, + .end = PXA_CS3_PHYS + 0x15f, + .flags = IORESOURCE_MEM + }, + [2] = { /* IDE IRQ pin */ + .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), + .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ), + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device vpac270_ide_device = { + .name = "pata_platform", + .num_resources = ARRAY_SIZE(vpac270_ide_resources), + .resource = vpac270_ide_resources, + .dev = { + .platform_data = &vpac270_pata_pdata, + } +}; + +static void __init vpac270_ide_init(void) +{ + platform_device_register(&vpac270_ide_device); +} +#else +static inline void vpac270_ide_init(void) {} +#endif + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static void __init vpac270_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config)); + + pxa_set_ffuart_info(NULL); + pxa_set_btuart_info(NULL); + pxa_set_stuart_info(NULL); + + vpac270_lcd_init(); + vpac270_mmc_init(); + vpac270_nor_init(); + vpac270_onenand_init(); + vpac270_leds_init(); + vpac270_keys_init(); + vpac270_uhc_init(); + vpac270_udc_init(); + vpac270_eth_init(); + vpac270_ts_init(); + vpac270_rtc_init(); + vpac270_ide_init(); +} + +MACHINE_START(VPAC270, "Voipac PXA270") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = vpac270_init +MACHINE_END diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c new file mode 100644 index 000000000000..f5d1ae3db3a4 --- /dev/null +++ b/arch/arm/mach-pxa/z2.c @@ -0,0 +1,609 @@ +/* + * linux/arch/arm/mach-pxa/z2.c + * + * Support for the Zipit Z2 Handheld device. + * + * Author: Ken McGuire + * Created: Jan 25, 2009 + * Based on mainstone.c as modified for the Zipit Z2. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/pwm_backlight.h> +#include <linux/dma-mapping.h> +#include <linux/spi/spi.h> +#include <linux/spi/libertas_spi.h> +#include <linux/spi/lms283gf05.h> +#include <linux/power_supply.h> +#include <linux/mtd/physmap.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/delay.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/pxa27x.h> +#include <mach/mfp-pxa27x.h> +#include <mach/z2.h> +#include <mach/pxafb.h> +#include <mach/mmc.h> +#include <mach/pxa27x_keypad.h> +#include <mach/pxa2xx_spi.h> + +#include <plat/i2c.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long z2_pin_config[] = { + + /* LCD - 16bpp Active TFT */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + GPIO19_GPIO, /* LCD reset */ + GPIO88_GPIO, /* LCD chipselect */ + + /* PWM */ + GPIO115_PWM1_OUT, /* Keypad Backlight */ + GPIO11_PWM2_OUT, /* LCD Backlight */ + + /* MMC */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO96_GPIO, /* SD detect */ + + /* STUART */ + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, + + /* Keypad */ + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, + GPIO38_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH, + GPIO16_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH, + GPIO17_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH, + GPIO103_KP_MKOUT_0, + GPIO104_KP_MKOUT_1, + GPIO105_KP_MKOUT_2, + GPIO106_KP_MKOUT_3, + GPIO107_KP_MKOUT_4, + GPIO108_KP_MKOUT_5, + GPIO35_KP_MKOUT_6, + GPIO41_KP_MKOUT_7, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + + /* SSP1 */ + GPIO23_SSP1_SCLK, /* SSP1_SCK */ + GPIO25_SSP1_TXD, /* SSP1_TXD */ + GPIO26_SSP1_RXD, /* SSP1_RXD */ + + /* SSP2 */ + GPIO22_SSP2_SCLK, /* SSP2_SCK */ + GPIO13_SSP2_TXD, /* SSP2_TXD */ + GPIO40_SSP2_RXD, /* SSP2_RXD */ + + /* LEDs */ + GPIO10_GPIO, /* WiFi LED */ + GPIO83_GPIO, /* Charging LED */ + GPIO85_GPIO, /* Charged LED */ + + /* I2S */ + GPIO28_I2S_BITCLK_OUT, + GPIO29_I2S_SDATA_IN, + GPIO30_I2S_SDATA_OUT, + GPIO31_I2S_SYNC, + GPIO113_I2S_SYSCLK, + + /* MISC */ + GPIO0_GPIO, /* AC power detect */ + GPIO1_GPIO, /* Power button */ + GPIO37_GPIO, /* Headphone detect */ + GPIO98_GPIO, /* Lid switch */ + GPIO14_GPIO, /* WiFi Reset */ + GPIO15_GPIO, /* WiFi Power */ + GPIO24_GPIO, /* WiFi CS */ + GPIO36_GPIO, /* WiFi IRQ */ + GPIO88_GPIO, /* LCD CS */ +}; + +/****************************************************************************** + * NOR Flash + ******************************************************************************/ +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct resource z2_flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_8M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct mtd_partition z2_flash_parts[] = { + { + .name = "U-Boot Bootloader", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "Linux Kernel", + .offset = 0x20000, + .size = 0x220000, + }, + { + .name = "Filesystem", + .offset = 0x240000, + .size = 0x5b0000, + }, + { + .name = "U-Boot Environment", + .offset = 0x7f0000, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data z2_flash_data = { + .width = 2, + .parts = z2_flash_parts, + .nr_parts = ARRAY_SIZE(z2_flash_parts), +}; + +static struct platform_device z2_flash = { + .name = "physmap-flash", + .id = -1, + .resource = &z2_flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &z2_flash_data, + }, +}; + +static void __init z2_nor_init(void) +{ + platform_device_register(&z2_flash); +} +#else +static inline void z2_nor_init(void) {} +#endif + +/****************************************************************************** + * Backlight + ******************************************************************************/ +#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) +static struct platform_pwm_backlight_data z2_backlight_data[] = { + [0] = { + /* Keypad Backlight */ + .pwm_id = 1, + .max_brightness = 1023, + .dft_brightness = 512, + .pwm_period_ns = 1260320, + }, + [1] = { + /* LCD Backlight */ + .pwm_id = 2, + .max_brightness = 1023, + .dft_brightness = 512, + .pwm_period_ns = 1260320, + }, +}; + +static struct platform_device z2_backlight_devices[2] = { + { + .name = "pwm-backlight", + .id = 0, + .dev = { + .platform_data = &z2_backlight_data[1], + }, + }, + { + .name = "pwm-backlight", + .id = 1, + .dev = { + .platform_data = &z2_backlight_data[0], + }, + }, +}; +static void __init z2_pwm_init(void) +{ + platform_device_register(&z2_backlight_devices[0]); + platform_device_register(&z2_backlight_devices[1]); +} +#else +static inline void z2_pwm_init(void) {} +#endif + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) +static struct pxafb_mode_info z2_lcd_modes[] = { +{ + .pixclock = 192000, + .xres = 240, + .yres = 320, + .bpp = 16, + + .left_margin = 4, + .right_margin = 8, + .upper_margin = 4, + .lower_margin = 8, + + .hsync_len = 4, + .vsync_len = 4, +}, +}; + +static struct pxafb_mach_info z2_lcd_screen = { + .modes = z2_lcd_modes, + .num_modes = ARRAY_SIZE(z2_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW | + LCD_ALTERNATE_MAPPING, +}; + +static void __init z2_lcd_init(void) +{ + set_pxa_fb_info(&z2_lcd_screen); +} +#else +static inline void z2_lcd_init(void) {} +#endif + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) +static struct pxamci_platform_data z2_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_card_detect = GPIO96_ZIPITZ2_SD_DETECT, + .gpio_power = -1, + .gpio_card_ro = -1, + .detect_delay_ms = 200, +}; + +static void __init z2_mmc_init(void) +{ + pxa_set_mci_info(&z2_mci_platform_data); +} +#else +static inline void z2_mmc_init(void) {} +#endif + +/****************************************************************************** + * LEDs + ******************************************************************************/ +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +struct gpio_led z2_gpio_leds[] = { +{ + .name = "z2:green:wifi", + .default_trigger = "none", + .gpio = GPIO10_ZIPITZ2_LED_WIFI, + .active_low = 1, +}, { + .name = "z2:green:charged", + .default_trigger = "none", + .gpio = GPIO85_ZIPITZ2_LED_CHARGED, + .active_low = 1, +}, { + .name = "z2:amber:charging", + .default_trigger = "none", + .gpio = GPIO83_ZIPITZ2_LED_CHARGING, + .active_low = 1, +}, +}; + +static struct gpio_led_platform_data z2_gpio_led_info = { + .leds = z2_gpio_leds, + .num_leds = ARRAY_SIZE(z2_gpio_leds), +}; + +static struct platform_device z2_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &z2_gpio_led_info, + } +}; + +static void __init z2_leds_init(void) +{ + platform_device_register(&z2_leds); +} +#else +static inline void z2_leds_init(void) {} +#endif + +/****************************************************************************** + * GPIO keyboard + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE) +static unsigned int z2_matrix_keys[] = { + KEY(0, 0, KEY_OPTION), + KEY(1, 0, KEY_UP), + KEY(2, 0, KEY_DOWN), + KEY(3, 0, KEY_LEFT), + KEY(4, 0, KEY_RIGHT), + KEY(5, 0, KEY_END), + KEY(6, 0, KEY_KPPLUS), + + KEY(0, 1, KEY_HOME), + KEY(1, 1, KEY_Q), + KEY(2, 1, KEY_I), + KEY(3, 1, KEY_G), + KEY(4, 1, KEY_X), + KEY(5, 1, KEY_ENTER), + KEY(6, 1, KEY_KPMINUS), + + KEY(0, 2, KEY_PAGEUP), + KEY(1, 2, KEY_W), + KEY(2, 2, KEY_O), + KEY(3, 2, KEY_H), + KEY(4, 2, KEY_C), + KEY(5, 2, KEY_LEFTALT), + + KEY(0, 3, KEY_PAGEDOWN), + KEY(1, 3, KEY_E), + KEY(2, 3, KEY_P), + KEY(3, 3, KEY_J), + KEY(4, 3, KEY_V), + KEY(5, 3, KEY_LEFTSHIFT), + + KEY(0, 4, KEY_ESC), + KEY(1, 4, KEY_R), + KEY(2, 4, KEY_A), + KEY(3, 4, KEY_K), + KEY(4, 4, KEY_B), + KEY(5, 4, KEY_LEFTCTRL), + + KEY(0, 5, KEY_TAB), + KEY(1, 5, KEY_T), + KEY(2, 5, KEY_S), + KEY(3, 5, KEY_L), + KEY(4, 5, KEY_N), + KEY(5, 5, KEY_SPACE), + + KEY(0, 6, KEY_STOPCD), + KEY(1, 6, KEY_Y), + KEY(2, 6, KEY_D), + KEY(3, 6, KEY_BACKSPACE), + KEY(4, 6, KEY_M), + KEY(5, 6, KEY_COMMA), + + KEY(0, 7, KEY_PLAYCD), + KEY(1, 7, KEY_U), + KEY(2, 7, KEY_F), + KEY(3, 7, KEY_Z), + KEY(4, 7, KEY_SEMICOLON), + KEY(5, 7, KEY_DOT), +}; + +static struct pxa27x_keypad_platform_data z2_keypad_platform_data = { + .matrix_key_rows = 7, + .matrix_key_cols = 8, + .matrix_key_map = z2_matrix_keys, + .matrix_key_map_size = ARRAY_SIZE(z2_matrix_keys), + + .debounce_interval = 30, +}; + +static void __init z2_mkp_init(void) +{ + pxa_set_keypad_info(&z2_keypad_platform_data); +} +#else +static inline void z2_mkp_init(void) {} +#endif + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button z2_pxa_buttons[] = { + {KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" }, + {KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" }, +}; + +static struct gpio_keys_platform_data z2_pxa_keys_data = { + .buttons = z2_pxa_buttons, + .nbuttons = ARRAY_SIZE(z2_pxa_buttons), +}; + +static struct platform_device z2_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &z2_pxa_keys_data, + }, +}; + +static void __init z2_keys_init(void) +{ + platform_device_register(&z2_pxa_keys); +} +#else +static inline void z2_keys_init(void) {} +#endif + +/****************************************************************************** + * SSP Devices - WiFi and LCD control + ******************************************************************************/ +#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) +/* WiFi */ +static int z2_lbs_spi_setup(struct spi_device *spi) +{ + int ret = 0; + + ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power"); + if (ret) + goto err; + + ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1); + if (ret) + goto err2; + + ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset"); + if (ret) + goto err2; + + ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0); + if (ret) + goto err3; + + /* Reset the card */ + mdelay(180); + gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1); + mdelay(20); + + spi->bits_per_word = 16; + spi->mode = SPI_MODE_2, + + spi_setup(spi); + + return 0; + +err3: + gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); +err2: + gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); +err: + return ret; +}; + +static int z2_lbs_spi_teardown(struct spi_device *spi) +{ + gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0); + gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0); + gpio_free(GPIO14_ZIPITZ2_WIFI_RESET); + gpio_free(GPIO15_ZIPITZ2_WIFI_POWER); + return 0; + +}; + +static struct pxa2xx_spi_chip z2_lbs_chip_info = { + .rx_threshold = 8, + .tx_threshold = 8, + .timeout = 1000, + .gpio_cs = GPIO24_ZIPITZ2_WIFI_CS, +}; + +static struct libertas_spi_platform_data z2_lbs_pdata = { + .use_dummy_writes = 1, + .setup = z2_lbs_spi_setup, + .teardown = z2_lbs_spi_teardown, +}; + +/* LCD */ +static struct pxa2xx_spi_chip lms283_chip_info = { + .rx_threshold = 1, + .tx_threshold = 1, + .timeout = 64, + .gpio_cs = GPIO88_ZIPITZ2_LCD_CS, +}; + +static const struct lms283gf05_pdata lms283_pdata = { + .reset_gpio = GPIO19_ZIPITZ2_LCD_RESET, +}; + +static struct spi_board_info spi_board_info[] __initdata = { +{ + .modalias = "libertas_spi", + .platform_data = &z2_lbs_pdata, + .controller_data = &z2_lbs_chip_info, + .irq = gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ), + .max_speed_hz = 13000000, + .bus_num = 1, + .chip_select = 0, +}, +{ + .modalias = "lms283gf05", + .controller_data = &lms283_chip_info, + .platform_data = &lms283_pdata, + .max_speed_hz = 400000, + .bus_num = 2, + .chip_select = 0, +}, +}; + +static struct pxa2xx_spi_master pxa_ssp1_master_info = { + .clock_enable = CKEN_SSP, + .num_chipselect = 1, + .enable_dma = 1, +}; + +static struct pxa2xx_spi_master pxa_ssp2_master_info = { + .clock_enable = CKEN_SSP2, + .num_chipselect = 1, +}; + +static void __init z2_spi_init(void) +{ + pxa2xx_set_spi_info(1, &pxa_ssp1_master_info); + pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); +} +#else +static inline void z2_spi_init(void) {} +#endif + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static void __init z2_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config)); + + z2_lcd_init(); + z2_mmc_init(); + z2_mkp_init(); + + pxa_set_i2c_info(NULL); + + z2_spi_init(); + z2_nor_init(); + z2_pwm_init(); + z2_leds_init(); + z2_keys_init(); +} + +MACHINE_START(ZIPIT2, "Zipit Z2") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = z2_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 39896d883584..3680f6a90623 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -644,7 +644,7 @@ static struct pxafb_mach_info zeus_fb_info = { static struct pxamci_platform_data zeus_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .detect_delay = HZ/4, + .detect_delay_ms = 250, .gpio_card_detect = ZEUS_MMC_CD_GPIO, .gpio_card_ro = ZEUS_MMC_WP_GPIO, .gpio_card_ro_invert = 1, diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 2b4043c04d0c..c479cbecf784 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -218,7 +218,7 @@ static inline void zylonite_init_lcd(void) {} #if defined(CONFIG_MMC) static struct pxamci_platform_data zylonite_mci_platform_data = { - .detect_delay = 20, + .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = EXT_GPIO(0), .gpio_card_ro = EXT_GPIO(2), @@ -226,7 +226,7 @@ static struct pxamci_platform_data zylonite_mci_platform_data = { }; static struct pxamci_platform_data zylonite_mci2_platform_data = { - .detect_delay = 20, + .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = EXT_GPIO(1), .gpio_card_ro = EXT_GPIO(3), @@ -234,7 +234,7 @@ static struct pxamci_platform_data zylonite_mci2_platform_data = { }; static struct pxamci_platform_data zylonite_mci3_platform_data = { - .detect_delay = 20, + .detect_delay_ms= 200, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .gpio_card_detect = EXT_GPIO(30), .gpio_card_ro = EXT_GPIO(31), diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index e704edb733c0..a01b76b7c956 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := core.o clock.o +obj-y := core.o obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c deleted file mode 100644 index a7043115de72..000000000000 --- a/arch/arm/mach-realview/clock.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * linux/arch/arm/mach-realview/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> - -#include <asm/hardware/icst307.h> - -#include "clock.h" - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - struct icst307_vco vco; - vco = icst307_khz_to_vco(clk->params, rate / 1000); - return icst307_khz(clk->params, vco) * 1000; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EIO; - - if (clk->setvco) { - struct icst307_vco vco; - - vco = icst307_khz_to_vco(clk->params, rate / 1000); - clk->rate = icst307_khz(clk->params, vco) * 1000; - clk->setvco(clk, vco); - ret = 0; - } - return ret; -} -EXPORT_SYMBOL(clk_set_rate); diff --git a/arch/arm/mach-realview/clock.h b/arch/arm/mach-realview/clock.h deleted file mode 100644 index ebbb0f06b600..000000000000 --- a/arch/arm/mach-realview/clock.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/arch/arm/mach-realview/clock.h - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -struct module; -struct icst307_params; - -struct clk { - unsigned long rate; - const struct icst307_params *params; - void *data; - void (*setvco)(struct clk *, struct icst307_vco vco); -}; diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index d5a95738f85b..595be19f8ad5 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -25,8 +25,6 @@ #include <linux/interrupt.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> #include <linux/io.h> #include <linux/smsc911x.h> #include <linux/ata_platform.h> @@ -40,7 +38,7 @@ #include <asm/leds.h> #include <asm/mach-types.h> #include <asm/hardware/arm_timer.h> -#include <asm/hardware/icst307.h> +#include <asm/hardware/icst.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> @@ -49,13 +47,12 @@ #include <asm/hardware/gic.h> +#include <mach/clkdev.h> #include <mach/platform.h> #include <mach/irqs.h> +#include <plat/timer-sp.h> #include "core.h" -#include "clock.h" - -#define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) /* used by entry-macro.S and platsmp.c */ void __iomem *gic_cpu_base_addr; @@ -79,20 +76,6 @@ void __init realview_adjust_zones(int node, unsigned long *size, } #endif -/* - * This is the RealView sched_clock implementation. This has - * a resolution of 41.7ns, and a maximum value of about 179s. - */ -unsigned long long sched_clock(void) -{ - unsigned long long v; - - v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125; - do_div(v, 3); - - return v; -} - #define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET) @@ -274,37 +257,40 @@ struct mmci_platform_data realview_mmc1_plat_data = { /* * Clock handling */ -static const struct icst307_params realview_oscvco_params = { - .ref = 24000, - .vco_max = 200000, +static const struct icst_params realview_oscvco_params = { + .ref = 24000000, + .vco_max = ICST307_VCO_MAX, + .vco_min = ICST307_VCO_MIN, .vd_min = 4 + 8, .vd_max = 511 + 8, .rd_min = 1 + 2, .rd_max = 127 + 2, + .s2div = icst307_s2div, + .idx2s = icst307_idx2s, }; -static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco) +static void realview_oscvco_set(struct clk *clk, struct icst_vco vco) { void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; - void __iomem *sys_osc; u32 val; - if (machine_is_realview_pb1176()) - sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; - else - sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; - - val = readl(sys_osc) & ~0x7ffff; + val = readl(clk->vcoreg) & ~0x7ffff; val |= vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, sys_lock); - writel(val, sys_osc); + writel(val, clk->vcoreg); writel(0, sys_lock); } +static const struct clk_ops oscvco_clk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = realview_oscvco_set, +}; + static struct clk oscvco_clk = { + .ops = &oscvco_clk_ops, .params = &realview_oscvco_params, - .setvco = realview_oscvco_set, }; /* @@ -347,7 +333,13 @@ static struct clk_lookup lookups[] = { static int __init clk_init(void) { + if (machine_is_realview_pb1176()) + oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; + else + oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + return 0; } arch_initcall(clk_init); @@ -644,133 +636,6 @@ void __iomem *timer2_va_base; void __iomem *timer3_va_base; /* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 8) -#define TIMER_DIVISOR (TIMER_CTRL_DIV256) -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ -#define TIMER_DIVISOR (TIMER_CTRL_DIV16) -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TIMER_RELOAD (TIMER_INTERVAL) -#define TIMER_DIVISOR (TIMER_CTRL_DIV1) -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - -static void timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - unsigned long ctrl; - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD); - - ctrl = TIMER_CTRL_PERIODIC; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE; - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl = TIMER_CTRL_ONESHOT; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } - - writel(ctrl, timer0_va_base + TIMER_CTRL); -} - -static int timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL); - - writel(evt, timer0_va_base + TIMER_LOAD); - writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL); - - return 0; -} - -static struct clock_event_device timer0_clockevent = { - .name = "timer0", - .shift = 32, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = timer_set_mode, - .set_next_event = timer_set_next_event, - .rating = 300, - .cpumask = cpu_all_mask, -}; - -static void __init realview_clockevents_init(unsigned int timer_irq) -{ - timer0_clockevent.irq = timer_irq; - timer0_clockevent.mult = - div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift); - timer0_clockevent.max_delta_ns = - clockevent_delta2ns(0xffffffff, &timer0_clockevent); - timer0_clockevent.min_delta_ns = - clockevent_delta2ns(0xf, &timer0_clockevent); - - clockevents_register_device(&timer0_clockevent); -} - -/* - * IRQ handler for the timer - */ -static irqreturn_t realview_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &timer0_clockevent; - - /* clear the interrupt */ - writel(1, timer0_va_base + TIMER_INTCLR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction realview_timer_irq = { - .name = "RealView Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = realview_timer_interrupt, -}; - -static cycle_t realview_get_cycles(struct clocksource *cs) -{ - return ~readl(timer3_va_base + TIMER_VALUE); -} - -static struct clocksource clocksource_realview = { - .name = "timer3", - .rating = 200, - .read = realview_get_cycles, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static void __init realview_clocksource_init(void) -{ - /* setup timer 0 as free-running clocksource */ - writel(0, timer3_va_base + TIMER_CTRL); - writel(0xffffffff, timer3_va_base + TIMER_LOAD); - writel(0xffffffff, timer3_va_base + TIMER_VALUE); - writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - timer3_va_base + TIMER_CTRL); - - clocksource_realview.mult = - clocksource_khz2mult(1000, clocksource_realview.shift); - clocksource_register(&clocksource_realview); -} - -/* * Set up the clock source and clock events devices */ void __init realview_timer_init(unsigned int timer_irq) @@ -797,13 +662,8 @@ void __init realview_timer_init(unsigned int timer_irq) writel(0, timer2_va_base + TIMER_CTRL); writel(0, timer3_va_base + TIMER_CTRL); - /* - * Make irqs happen for the system timer - */ - setup_irq(timer_irq, &realview_timer_irq); - - realview_clocksource_init(); - realview_clockevents_init(timer_irq); + sp804_clocksource_init(timer3_va_base); + sp804_clockevents_init(timer0_va_base, timer_irq); } /* diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index be048e3e8799..f95521a5e5ce 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -131,7 +131,7 @@ void platform_cpu_die(unsigned int cpu) cpu_leave_lowpower(); } -int mach_cpu_disable(unsigned int cpu) +int platform_cpu_disable(unsigned int cpu) { /* * we don't allow CPU 0 to be shutdown (it is still too special diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h index 04b37a89801c..e58d0771b64e 100644 --- a/arch/arm/mach-realview/include/mach/clkdev.h +++ b/arch/arm/mach-realview/include/mach/clkdev.h @@ -1,6 +1,15 @@ #ifndef __ASM_MACH_CLKDEV_H #define __ASM_MACH_CLKDEV_H +#include <plat/clock.h> + +struct clk { + unsigned long rate; + const struct clk_ops *ops; + const struct icst_params *params; + void __iomem *vcoreg; +}; + #define __clk_get(clk) ({ 1; }) #define __clk_put(clk) do { } while (0) diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h index 2410d4f8ddd3..830055bb8628 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -31,6 +31,7 @@ #define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ #define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ #define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_DC1176_CORE_PMU (IRQ_DC1176_GIC_START + 7) /* Core PMU interrupt */ #define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ #define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ #define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h index 86792a9f2ab6..4a88a4edb651 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pba8.h +++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h @@ -23,12 +23,6 @@ #define IRQ_PBA8_GIC_START 32 -/* L220 -#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29) -#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30) -#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31) -*/ - /* * PB-A8 on-board gic irq sources */ @@ -65,6 +59,8 @@ #define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ #define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ +#define IRQ_PBA8_PMU (IRQ_PBA8_GIC_START + 47) /* Cortex-A8 PMU */ + /* ... */ #define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) #define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h index deaad4302b17..206a3001f46b 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pbx.h +++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h @@ -22,12 +22,6 @@ #define IRQ_PBX_GIC_START 32 -/* L220 -#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29) -#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30) -#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31) -*/ - /* * PBX on-board gic irq sources */ @@ -77,10 +71,10 @@ #define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */ #define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */ /* ... */ -#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ -#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45) -#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46) -#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47) +#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ +#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 45) +#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 46) +#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 47) /* ... */ #define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50) diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h index 86c0c4435a46..1b77a27badaf 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -231,12 +231,6 @@ #define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ #define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE REALVIEW_BOOT_ROM_HI - /* * System controller bit assignment */ @@ -249,20 +243,6 @@ #define REALVIEW_TIMER4_EnSel 21 -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 1 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - #define REALVIEW_CSR_BASE 0x10000000 #define REALVIEW_CSR_SIZE 0x10000000 diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 7d857d300558..422ccd70d5f5 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -31,8 +31,8 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> +#include <asm/pmu.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> #include <asm/localtimer.h> @@ -44,7 +44,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_eb_io_desc[] __initdata = { { @@ -294,6 +293,36 @@ static struct resource realview_eb_isp1761_resources[] = { }, }; +static struct resource pmu_resources[] = { + [0] = { + .start = IRQ_EB11MP_PMU_CPU0, + .end = IRQ_EB11MP_PMU_CPU0, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = IRQ_EB11MP_PMU_CPU1, + .end = IRQ_EB11MP_PMU_CPU1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_EB11MP_PMU_CPU2, + .end = IRQ_EB11MP_PMU_CPU2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_EB11MP_PMU_CPU3, + .end = IRQ_EB11MP_PMU_CPU3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(pmu_resources), + .resource = pmu_resources, +}; + static void __init gic_init_irq(void) { if (core_tile_eb11mp() || core_tile_a9mp()) { @@ -407,6 +436,7 @@ static void __init realview_eb_init(void) * Bits: .... ...0 0111 1001 0000 .... .... .... */ l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); #endif + platform_device_register(&pmu_device); } realview_flash_register(&realview_eb_flash_resource, 1); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 44392e51dd50..96568ebfa2bb 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -31,8 +31,8 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> +#include <asm/pmu.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> @@ -44,7 +44,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_pb1176_io_desc[] __initdata = { { @@ -263,6 +262,19 @@ static struct resource realview_pb1176_isp1761_resources[] = { }, }; +static struct resource pmu_resource = { + .start = IRQ_DC1176_CORE_PMU, + .end = IRQ_DC1176_CORE_PMU, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = 1, + .resource = &pmu_resource, +}; + static void __init gic_init_irq(void) { /* ARM1176 DevChip GIC, primary */ @@ -324,6 +336,7 @@ static void __init realview_pb1176_init(void) realview_eth_register(NULL, realview_pb1176_smsc911x_resources); platform_device_register(&realview_i2c_device); realview_usb_register(realview_pb1176_isp1761_resources); + platform_device_register(&pmu_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 3e02731af959..7fbefbbebaf0 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -31,8 +31,8 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> +#include <asm/pmu.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/hardware/cache-l2x0.h> #include <asm/localtimer.h> @@ -45,7 +45,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_pb11mp_io_desc[] __initdata = { { @@ -260,6 +259,36 @@ static struct resource realview_pb11mp_isp1761_resources[] = { }, }; +static struct resource pmu_resources[] = { + [0] = { + .start = IRQ_TC11MP_PMU_CPU0, + .end = IRQ_TC11MP_PMU_CPU0, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = IRQ_TC11MP_PMU_CPU1, + .end = IRQ_TC11MP_PMU_CPU1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_TC11MP_PMU_CPU2, + .end = IRQ_TC11MP_PMU_CPU2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_TC11MP_PMU_CPU3, + .end = IRQ_TC11MP_PMU_CPU3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(pmu_resources), + .resource = pmu_resources, +}; + static void __init gic_init_irq(void) { unsigned int pldctrl; @@ -329,6 +358,7 @@ static void __init realview_pb11mp_init(void) platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); realview_usb_register(realview_pb11mp_isp1761_resources); + platform_device_register(&pmu_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index fe4e25c4201a..d3c113b3dfce 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -30,8 +30,8 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> +#include <asm/pmu.h> #include <asm/hardware/gic.h> -#include <asm/hardware/icst307.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -42,7 +42,6 @@ #include <mach/irqs.h> #include "core.h" -#include "clock.h" static struct map_desc realview_pba8_io_desc[] __initdata = { { @@ -250,6 +249,19 @@ static struct resource realview_pba8_isp1761_resources[] = { }, }; +static struct resource pmu_resource = { + .start = IRQ_PBA8_PMU, + .end = IRQ_PBA8_PMU, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = 1, + .resource = &pmu_resource, +}; + static void __init gic_init_irq(void) { /* ARM PB-A8 on-board GIC */ @@ -296,6 +308,7 @@ static void __init realview_pba8_init(void) platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); realview_usb_register(realview_pba8_isp1761_resources); + platform_device_register(&pmu_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index d94857eb0690..a235ba30996b 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -29,6 +29,7 @@ #include <asm/irq.h> #include <asm/leds.h> #include <asm/mach-types.h> +#include <asm/pmu.h> #include <asm/smp_twd.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> @@ -270,6 +271,36 @@ static struct resource realview_pbx_isp1761_resources[] = { }, }; +static struct resource pmu_resources[] = { + [0] = { + .start = IRQ_PBX_PMU_CPU0, + .end = IRQ_PBX_PMU_CPU0, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = IRQ_PBX_PMU_CPU1, + .end = IRQ_PBX_PMU_CPU1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_PBX_PMU_CPU2, + .end = IRQ_PBX_PMU_CPU2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_PBX_PMU_CPU3, + .end = IRQ_PBX_PMU_CPU3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(pmu_resources), + .resource = pmu_resources, +}; + static void __init gic_init_irq(void) { /* ARM PBX on-board GIC */ @@ -354,6 +385,7 @@ static void __init realview_pbx_init(void) /* 16KB way size, 8-way associativity, parity disabled * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */ l2x0_init(l2x0_base, 0x02520000, 0xc0000fff); + platform_device_register(&pmu_device); } #endif diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 554731868b07..9e5e96f12d86 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -6,6 +6,7 @@ config CPU_S3C2410 bool depends on ARCH_S3C2410 select CPU_ARM920T + select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index a3f3c7b1ca38..8cdeb14af592 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -33,14 +33,15 @@ static void h1940bt_enable(int on) h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER); /* Reset the chip */ mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH(1), 1); + + gpio_set_value(S3C2410_GPH(1), 1); mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH(1), 0); + gpio_set_value(S3C2410_GPH(1), 0); } else { - s3c2410_gpio_setpin(S3C2410_GPH(1), 1); + gpio_set_value(S3C2410_GPH(1), 1); mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH(1), 0); + gpio_set_value(S3C2410_GPH(1), 0); mdelay(10); h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0); } @@ -61,15 +62,21 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) struct rfkill *rfk; int ret = 0; + ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev)); + if (ret) { + dev_err(&pdev->dev, "could not get GPH1\n");\ + return ret; + } + /* Configures BT serial port GPIOs */ - s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); - s3c2410_gpio_pullup(S3C2410_GPH(0), 1); - s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_pullup(S3C2410_GPH(1), 1); - s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); - s3c2410_gpio_pullup(S3C2410_GPH(2), 1); - s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); - s3c2410_gpio_pullup(S3C2410_GPH(3), 1); + s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); + s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); + s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); + s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, @@ -100,6 +107,7 @@ static int h1940bt_remove(struct platform_device *pdev) struct rfkill *rfk = platform_get_drvdata(pdev); platform_set_drvdata(pdev, NULL); + gpio_free(S3C2410_GPH(1)); if (rfk) { rfkill_unregister(rfk); diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index 08ac5f96c012..cf68136cc668 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -54,7 +54,7 @@ enum dma_ch { #define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ /* we have 4 dma channels */ -#ifndef CONFIG_CPU_S3C2443 +#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416) #define S3C_DMA_CHANNELS (4) #else #define S3C_DMA_CHANNELS (6) diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index 035a493952db..f453c4f2cb8e 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -10,14 +10,28 @@ * published by the Free Software Foundation. */ +#ifndef __MACH_GPIO_FNS_H +#define __MACH_GPIO_FNS_H __FILE__ + /* These functions are in the to-be-removed category and it is strongly * encouraged not to use these in new code. They will be marked deprecated * very soon. * * Most of the functionality can be either replaced by the gpiocfg calls * for the s3c platform or by the generic GPIOlib API. + * + * As of 2.6.35-rc, these will be removed, with the few drivers using them + * either replaced or given a wrapper until the calls can be removed. */ +#include <plat/gpio-cfg.h> + +static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg) +{ + /* 1:1 mapping between cfgpin and setcfg calls at the moment */ + s3c_gpio_cfgpin(pin, cfg); +} + /* external functions for GPIO support * * These allow various different clients to access the same GPIO @@ -25,17 +39,6 @@ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. */ -/* s3c2410_gpio_cfgpin - * - * set the configuration of the given pin to the value passed. - * - * eg: - * s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0); - * s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1); -*/ - -extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); - extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); /* s3c2410_gpio_getirq @@ -73,6 +76,14 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, /* s3c2410_gpio_pullup * + * This call should be replaced with s3c_gpio_setpull(). + * + * As a note, there is currently no distinction between pull-up and pull-down + * in the s3c24xx series devices with only an on/off configuration. + */ + +/* s3c2410_gpio_pullup + * * configure the pull-up control on the given pin * * to = 1 => disable the pull-up @@ -86,18 +97,8 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); -/* s3c2410_gpio_getpull - * - * Read the state of the pull-up on a given pin - * - * return: - * < 0 => error code - * 0 => enabled - * 1 => disabled -*/ - -extern int s3c2410_gpio_getpull(unsigned int pin); - extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); extern unsigned int s3c2410_gpio_getpin(unsigned int pin); + +#endif /* __MACH_GPIO_FNS_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h index 2edbb9c88ab3..f3182ff847cb 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h @@ -34,6 +34,10 @@ #define S3C2410_GPIO_F_NR (32) #define S3C2410_GPIO_G_NR (32) #define S3C2410_GPIO_H_NR (32) +#define S3C2410_GPIO_J_NR (32) /* technically 16. */ +#define S3C2410_GPIO_K_NR (32) /* technically 16. */ +#define S3C2410_GPIO_L_NR (32) /* technically 15. */ +#define S3C2410_GPIO_M_NR (32) /* technically 2. */ #if CONFIG_S3C_GPIO_SPACE != 0 #error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment @@ -53,6 +57,10 @@ enum s3c_gpio_number { S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E), S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F), S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G), + S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H), + S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J), + S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K), + S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L), }; #endif /* __ASSEMBLY__ */ @@ -67,6 +75,10 @@ enum s3c_gpio_number { #define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr)) #define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr)) #define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr)) +#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr)) +#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr)) +#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) +#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) /* compatibility until drivers can be modified */ diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index 6c12c6312ad8..877c15e1b154 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -115,6 +115,26 @@ #define IRQ_S3C2412_SDI S3C2410_IRQSUB(13) #define IRQ_S3C2412_CF S3C2410_IRQSUB(14) + +#define IRQ_S3C2416_EINT8t15 S3C2410_IRQ(5) +#define IRQ_S3C2416_DMA S3C2410_IRQ(17) +#define IRQ_S3C2416_UART3 S3C2410_IRQ(18) +#define IRQ_S3C2416_SDI1 S3C2410_IRQ(20) +#define IRQ_S3C2416_SDI0 S3C2410_IRQ(21) + +#define IRQ_S3C2416_LCD2 S3C2410_IRQSUB(15) +#define IRQ_S3C2416_LCD3 S3C2410_IRQSUB(16) +#define IRQ_S3C2416_LCD4 S3C2410_IRQSUB(17) +#define IRQ_S3C2416_DMA0 S3C2410_IRQSUB(18) +#define IRQ_S3C2416_DMA1 S3C2410_IRQSUB(19) +#define IRQ_S3C2416_DMA2 S3C2410_IRQSUB(20) +#define IRQ_S3C2416_DMA3 S3C2410_IRQSUB(21) +#define IRQ_S3C2416_DMA4 S3C2410_IRQSUB(22) +#define IRQ_S3C2416_DMA5 S3C2410_IRQSUB(23) +#define IRQ_S32416_WDT S3C2410_IRQSUB(27) +#define IRQ_S32416_AC97 S3C2410_IRQSUB(28) + + /* extra irqs for s3c2440 */ #define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */ @@ -130,7 +150,10 @@ #define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ #define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ +#define IRQ_S3C2416_HSMMC0 S3C2410_IRQ(21) /* S3C2416/S3C2450 */ + #define IRQ_HSMMC0 IRQ_S3C2443_HSMMC +#define IRQ_HSMMC1 IRQ_S3C2416_HSMMC0 #define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) #define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) @@ -152,7 +175,7 @@ #define IRQ_S3C2443_WDT S3C2410_IRQSUB(27) #define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) -#ifdef CONFIG_CPU_S3C2443 +#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) #define NR_IRQS (IRQ_S3C2443_AC97+1) #else #define NR_IRQS (IRQ_S3C2440_AC97+1) diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index b049e61460b6..f07d68066d7e 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -63,9 +63,9 @@ #define S3C2440_PA_AC97 (0x5B000000) #define S3C2440_SZ_AC97 SZ_1M -/* S3C2443 High-speed SD/MMC */ +/* S3C2443/S3C2416 High-speed SD/MMC */ #define S3C2443_PA_HSMMC (0x4A800000) -#define S3C2443_SZ_HSMMC (256) +#define S3C2416_PA_HSMMC0 (0x4AC00000) /* S3C2412 memory and IO controls */ #define S3C2412_PA_SSMC (0x4F000000) @@ -110,6 +110,7 @@ #define S3C_PA_UART S3C24XX_PA_UART #define S3C_PA_USBHOST S3C2410_PA_USBHOST #define S3C_PA_HSMMC0 S3C2443_PA_HSMMC +#define S3C_PA_HSMMC1 S3C2416_PA_HSMMC0 #define S3C_PA_NAND S3C24XX_PA_NAND #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h index 9a0d169be137..3415b60082d7 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h @@ -161,4 +161,6 @@ #endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */ +#define S3C2416_CLKDIV2 S3C2410_CLKREG(0x28) + #endif /* __ASM_ARM_REGS_CLOCK */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h index 3c3853cd3cf7..98fd4a05587c 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h @@ -19,6 +19,42 @@ #define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) #endif +#if defined(CONFIG_CPU_S3C2416) +#define S3C2416_DSC0 S3C2410_GPIOREG(0xc0) +#define S3C2416_DSC1 S3C2410_GPIOREG(0xc4) +#define S3C2416_DSC2 S3C2410_GPIOREG(0xc8) +#define S3C2416_DSC3 S3C2410_GPIOREG(0x110) + +#define S3C2416_SELECT_DSC0 (0 << 30) +#define S3C2416_SELECT_DSC1 (1 << 30) +#define S3C2416_SELECT_DSC2 (2 << 30) +#define S3C2416_SELECT_DSC3 (3 << 30) + +#define S3C2416_DSC_GETSHIFT(x) (x & 30) + +#define S3C2416_DSC0_CF (S3C2416_SELECT_DSC0 | 28) +#define S3C2416_DSC0_CF_5mA (0 << 28) +#define S3C2416_DSC0_CF_10mA (1 << 28) +#define S3C2416_DSC0_CF_15mA (2 << 28) +#define S3C2416_DSC0_CF_21mA (3 << 28) +#define S3C2416_DSC0_CF_MASK (3 << 28) + +#define S3C2416_DSC0_nRBE (S3C2416_SELECT_DSC0 | 26) +#define S3C2416_DSC0_nRBE_5mA (0 << 26) +#define S3C2416_DSC0_nRBE_10mA (1 << 26) +#define S3C2416_DSC0_nRBE_15mA (2 << 26) +#define S3C2416_DSC0_nRBE_21mA (3 << 26) +#define S3C2416_DSC0_nRBE_MASK (3 << 26) + +#define S3C2416_DSC0_nROE (S3C2416_SELECT_DSC0 | 24) +#define S3C2416_DSC0_nROE_5mA (0 << 24) +#define S3C2416_DSC0_nROE_10mA (1 << 24) +#define S3C2416_DSC0_nROE_15mA (2 << 24) +#define S3C2416_DSC0_nROE_21mA (3 << 24) +#define S3C2416_DSC0_nROE_MASK (3 << 24) + +#endif + #if defined(CONFIG_CPU_S3C244X) #define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index fd672f330bf2..a6384239eddf 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -610,35 +610,73 @@ #define S3C2410_GPHUP S3C2410_GPIOREG(0x78) #define S3C2410_GPH0_nCTS0 (0x02 << 0) +#define S3C2416_GPH0_TXD0 (0x02 << 0) #define S3C2410_GPH1_nRTS0 (0x02 << 2) +#define S3C2416_GPH1_RXD0 (0x02 << 2) #define S3C2410_GPH2_TXD0 (0x02 << 4) +#define S3C2416_GPH2_TXD1 (0x02 << 4) #define S3C2410_GPH3_RXD0 (0x02 << 6) +#define S3C2416_GPH3_RXD1 (0x02 << 6) #define S3C2410_GPH4_TXD1 (0x02 << 8) +#define S3C2416_GPH4_TXD2 (0x02 << 8) #define S3C2410_GPH5_RXD1 (0x02 << 10) +#define S3C2416_GPH5_RXD2 (0x02 << 10) #define S3C2410_GPH6_TXD2 (0x02 << 12) +#define S3C2416_GPH6_TXD3 (0x02 << 12) #define S3C2410_GPH6_nRTS1 (0x03 << 12) +#define S3C2416_GPH6_nRTS2 (0x03 << 12) #define S3C2410_GPH7_RXD2 (0x02 << 14) +#define S3C2416_GPH7_RXD3 (0x02 << 14) #define S3C2410_GPH7_nCTS1 (0x03 << 14) +#define S3C2416_GPH7_nCTS2 (0x03 << 14) #define S3C2410_GPH8_UCLK (0x02 << 16) +#define S3C2416_GPH8_nCTS0 (0x02 << 16) #define S3C2410_GPH9_CLKOUT0 (0x02 << 18) #define S3C2442_GPH9_nSPICS0 (0x03 << 18) +#define S3C2416_GPH9_nRTS0 (0x02 << 18) #define S3C2410_GPH10_CLKOUT1 (0x02 << 20) +#define S3C2416_GPH10_nCTS1 (0x02 << 20) + +#define S3C2416_GPH11_nRTS1 (0x02 << 22) + +#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24) + +#define S3C2416_GPH13_CLKOUT0 (0x02 << 26) + +#define S3C2416_GPH14_CLKOUT1 (0x02 << 28) /* The S3C2412 and S3C2413 move the GPJ register set to after * GPH, which means all registers after 0x80 are now offset by 0x10 * for the 2412/2413 from the 2410/2440/2442 */ +/* S3C2443 and above */ +#define S3C2440_GPJCON S3C2410_GPIOREG(0xD0) +#define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4) +#define S3C2440_GPJUP S3C2410_GPIOREG(0xD8) + +#define S3C2443_GPKCON S3C2410_GPIOREG(0xE0) +#define S3C2443_GPKDAT S3C2410_GPIOREG(0xE4) +#define S3C2443_GPKUP S3C2410_GPIOREG(0xE8) + +#define S3C2443_GPLCON S3C2410_GPIOREG(0xF0) +#define S3C2443_GPLDAT S3C2410_GPIOREG(0xF4) +#define S3C2443_GPLUP S3C2410_GPIOREG(0xF8) + +#define S3C2443_GPMCON S3C2410_GPIOREG(0x100) +#define S3C2443_GPMDAT S3C2410_GPIOREG(0x104) +#define S3C2443_GPMUP S3C2410_GPIOREG(0x108) + /* miscellaneous control */ #define S3C2400_MISCCR S3C2410_GPIOREG(0x54) #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) @@ -686,6 +724,7 @@ #define S3C2412_MISCCR_CLK1_CLKsrc (0<<8) #define S3C2410_MISCCR_USBSUSPND0 (1<<12) +#define S3C2416_MISCCR_SEL_SUSPND (1<<12) #define S3C2410_MISCCR_USBSUSPND1 (1<<13) #define S3C2410_MISCCR_nRSTCON (1<<16) @@ -695,6 +734,9 @@ #define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */ #define S3C2410_MISCCR_SDSLEEP (7<<17) +#define S3C2416_MISCCR_FLT_I2C (1<<24) +#define S3C2416_MISCCR_HSSPI_EN2 (1<<31) + /* external interrupt control... */ /* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7 * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15 @@ -762,8 +804,11 @@ #define S3C2410_GSTATUS1_IDMASK (0xffff0000) #define S3C2410_GSTATUS1_2410 (0x32410000) #define S3C2410_GSTATUS1_2412 (0x32412001) +#define S3C2410_GSTATUS1_2416 (0x32416003) #define S3C2410_GSTATUS1_2440 (0x32440000) #define S3C2410_GSTATUS1_2442 (0x32440aaa) +/* some 2416 CPUs report this value also */ +#define S3C2410_GSTATUS1_2450 (0x32450003) #define S3C2410_GSTATUS2_WTRESET (1<<2) #define S3C2410_GSTATUS2_OFFRESET (1<<1) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h index 1202ca5e99f6..19575e061114 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h @@ -22,85 +22,49 @@ * pull up works like all other ports. */ -#define S3C2440_GPIO_BANKJ (416) - -#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0) -#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4) -#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8) - #define S3C2413_GPJCON S3C2410_GPIOREG(0x80) #define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) #define S3C2413_GPJUP S3C2410_GPIOREG(0x88) #define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) -#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0) -#define S3C2440_GPJ0_INP (0x00 << 0) #define S3C2440_GPJ0_OUTP (0x01 << 0) #define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) -#define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1) -#define S3C2440_GPJ1_INP (0x00 << 2) #define S3C2440_GPJ1_OUTP (0x01 << 2) #define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) -#define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2) -#define S3C2440_GPJ2_INP (0x00 << 4) #define S3C2440_GPJ2_OUTP (0x01 << 4) #define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) -#define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3) -#define S3C2440_GPJ3_INP (0x00 << 6) #define S3C2440_GPJ3_OUTP (0x01 << 6) #define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) -#define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4) -#define S3C2440_GPJ4_INP (0x00 << 8) #define S3C2440_GPJ4_OUTP (0x01 << 8) #define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) -#define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5) -#define S3C2440_GPJ5_INP (0x00 << 10) #define S3C2440_GPJ5_OUTP (0x01 << 10) #define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) -#define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6) -#define S3C2440_GPJ6_INP (0x00 << 12) #define S3C2440_GPJ6_OUTP (0x01 << 12) #define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) -#define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7) -#define S3C2440_GPJ7_INP (0x00 << 14) #define S3C2440_GPJ7_OUTP (0x01 << 14) #define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) -#define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8) -#define S3C2440_GPJ8_INP (0x00 << 16) #define S3C2440_GPJ8_OUTP (0x01 << 16) #define S3C2440_GPJ8_CAMPCLK (0x02 << 16) -#define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9) -#define S3C2440_GPJ9_INP (0x00 << 18) #define S3C2440_GPJ9_OUTP (0x01 << 18) #define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) -#define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10) -#define S3C2440_GPJ10_INP (0x00 << 20) #define S3C2440_GPJ10_OUTP (0x01 << 20) #define S3C2440_GPJ10_CAMHREF (0x02 << 20) -#define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11) -#define S3C2440_GPJ11_INP (0x00 << 22) #define S3C2440_GPJ11_OUTP (0x01 << 22) #define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) -#define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12) -#define S3C2440_GPJ12_INP (0x00 << 24) #define S3C2440_GPJ12_OUTP (0x01 << 24) #define S3C2440_GPJ12_CAMRESET (0x02 << 24) -#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13) -#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14) -#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15) - #endif /* __ASM_ARCH_REGS_GPIOJ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h index de86ee8812bd..0f07ba30b1fb 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-irq.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h @@ -27,6 +27,16 @@ #define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018) #define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C) +#define S3C2416_PRIORITY_MODE1 S3C2410_IRQREG(0x030) +#define S3C2416_PRIORITY_UPDATE1 S3C2410_IRQREG(0x034) +#define S3C2416_SRCPND2 S3C2410_IRQREG(0x040) +#define S3C2416_INTMOD2 S3C2410_IRQREG(0x044) +#define S3C2416_INTMSK2 S3C2410_IRQREG(0x048) +#define S3C2416_INTPND2 S3C2410_IRQREG(0x050) +#define S3C2416_INTOFFSET2 S3C2410_IRQREG(0x054) +#define S3C2416_PRIORITY_MODE2 S3C2410_IRQREG(0x070) +#define S3C2416_PRIORITY_UPDATE2 S3C2410_IRQREG(0x074) + /* mask: 0=enable, 1=disable * 1 bit EINT, 4=EINT4, 23=EINT23 * EINT0,1,2,3 are not handled here. diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h new file mode 100644 index 000000000000..2f31b74974af --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h @@ -0,0 +1,30 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2416 memory register definitions +*/ + +#ifndef __ASM_ARM_REGS_S3C2416_MEM +#define __ASM_ARM_REGS_S3C2416_MEM + +#ifndef S3C2416_MEMREG +#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#endif + +#define S3C2416_BANKCFG S3C2416_MEMREG(0x00) +#define S3C2416_BANKCON1 S3C2416_MEMREG(0x04) +#define S3C2416_BANKCON2 S3C2416_MEMREG(0x08) +#define S3C2416_BANKCON3 S3C2416_MEMREG(0x0C) + +#define S3C2416_REFRESH S3C2416_MEMREG(0x10) +#define S3C2416_TIMEOUT S3C2416_MEMREG(0x14) + +#endif /* __ASM_ARM_REGS_S3C2416_MEM */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h new file mode 100644 index 000000000000..e443167efb87 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h @@ -0,0 +1,24 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2416 specific register definitions +*/ + +#ifndef __ASM_ARCH_REGS_S3C2416_H +#define __ASM_ARCH_REGS_S3C2416_H "s3c2416" + +#define S3C2416_SWRST (S3C24XX_VA_CLKPWR + 0x44) +#define S3C2416_SWRST_RESET (0x533C2416) + +/* see regs-power.h for the other registers in the power block. */ + +#endif /* __ASM_ARCH_REGS_S3C2416_H */ + diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h index 72f756c5e504..8b283f847daa 100644 --- a/arch/arm/mach-s3c2410/include/mach/uncompress.h +++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h @@ -40,7 +40,9 @@ static void arch_detect_cpu(void) cpuid &= S3C2410_GSTATUS1_IDMASK; if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 || - cpuid == S3C2410_GSTATUS1_2442) { + cpuid == S3C2410_GSTATUS1_2442 || + cpuid == S3C2410_GSTATUS1_2416 || + cpuid == S3C2410_GSTATUS1_2450) { fifo_mask = S3C2440_UFSTAT_TXMASK; fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; } else { diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 7047317ed7f4..34fc05a4244b 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -56,6 +56,7 @@ #include <plat/iic.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/gpio-cfg.h> #ifdef CONFIG_MTD_PARTITIONS @@ -225,8 +226,8 @@ static void amlm5900_init_pm(void) } else { enable_irq_wake(IRQ_EINT9); /* configure the suspend/resume status pin */ - s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_pullup(S3C2410_GPF(2), 0); + s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); + s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP); } } static void __init amlm5900_init(void) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 02b1b6220cba..b061ddcf3067 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -61,6 +61,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> +#include <plat/gpio-cfg.h> #include <plat/audio-simtec.h> #include "usb-simtec.h" @@ -216,15 +217,13 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { static int bast_pm_suspend(struct sys_device *sd, pm_message_t state) { /* ensure that an nRESET is not generated on resume. */ - s3c2410_gpio_setpin(S3C2410_GPA(21), 1); - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); - + gpio_direction_output(S3C2410_GPA(21), 1); return 0; } static int bast_pm_resume(struct sys_device *sd) { - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); return 0; } @@ -658,6 +657,8 @@ static void __init bast_init(void) nor_simtec_init(); simtec_audio_add(NULL, true, &bast_audio); + WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset")); + s3c_cpufreq_setboard(&bast_cpufreq); } diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index fbedd0760941..9531b4c41deb 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -50,6 +50,7 @@ #include <plat/udc.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -207,16 +208,16 @@ static int h1940_backlight_init(struct device *dev) { gpio_request(S3C2410_GPB(0), "Backlight"); - s3c2410_gpio_setpin(S3C2410_GPB(0), 0); - s3c2410_gpio_pullup(S3C2410_GPB(0), 0); - s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); + gpio_direction_output(S3C2410_GPB(0), 0); + s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); return 0; } static void h1940_backlight_exit(struct device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/); + gpio_direction_output(S3C2410_GPB(0), 1); } static struct platform_pwm_backlight_data backlight_data = { @@ -245,18 +246,18 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd, if (!power) { /* set to 3ec */ - s3c2410_gpio_setpin(S3C2410_GPC(0), 0); + gpio_direction_output(S3C2410_GPC(0), 0); /* wait for 3ac */ do { - value = s3c2410_gpio_getpin(S3C2410_GPC(6)); + value = gpio_get_value(S3C2410_GPC(6)); } while (value); /* set to 38c */ - s3c2410_gpio_setpin(S3C2410_GPC(5), 0); + gpio_direction_output(S3C2410_GPC(5), 0); } else { /* Set to 3ac */ - s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + gpio_direction_output(S3C2410_GPC(5), 1); /* Set to 3ad */ - s3c2410_gpio_setpin(S3C2410_GPC(0), 1); + gpio_direction_output(S3C2410_GPC(0), 1); } } @@ -332,6 +333,7 @@ static void __init h1940_init(void) gpio_request(S3C2410_GPC(5), "LCD power"); gpio_request(S3C2410_GPC(6), "LCD power"); + gpio_direction_input(S3C2410_GPC(6)); platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); } diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 684710f88142..75a9fd37a467 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -86,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd) { switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPB(3), 1); + gpio_set_value(S3C2410_GPB(3), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPB(3), 0); + gpio_set_value(S3C2410_GPB(3), 0); break; case S3C2410_UDC_P_RESET : break; @@ -536,6 +536,9 @@ static void __init n30_init(void) platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices)); } + + WARN_ON(gpio_request(S3C2410_GPB(3), "udc pup")); + gpio_direction_output(S3C2410_GPB(3), 0); } MACHINE_START(N30, "Acer-N30") diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 92a4ec375d82..d0e87b6e2e0f 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -58,6 +58,7 @@ #include <plat/iic.h> #include <plat/common-smdk.h> +#include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> @@ -219,10 +220,10 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) { switch (cs) { case BITBANG_CS_ACTIVE: - s3c2410_gpio_setpin(S3C2410_GPB(5), 0); + gpio_set_value(S3C2410_GPB(5), 0); break; case BITBANG_CS_INACTIVE: - s3c2410_gpio_setpin(S3C2410_GPB(5), 1); + gpio_set_value(S3C2410_GPB(5), 1); break; } } @@ -347,13 +348,14 @@ static void __init qt2410_machine_init(void) } s3c24xx_fb_set_platdata(&qt2410_fb_info); - s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPB(0), 1); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL); - s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPB(5), "spi cs")); + gpio_direction_output(S3C2410_GPB(5), 1); platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); s3c_pm_init(); diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 9051f0d31123..d540d79dd264 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -357,8 +357,7 @@ static struct clk *vr1000_clocks[] __initdata = { static void vr1000_power_off(void) { - s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB(9), 1); + gpio_direction_output(S3C2410_GPB(9), 1); } static void __init vr1000_map_io(void) @@ -395,6 +394,8 @@ static void __init vr1000_init(void) nor_simtec_init(); simtec_audio_add(NULL, true, NULL); + + WARN_ON(gpio_request(S3C2410_GPB(9), "power off")); } MACHINE_START(VR1000, "Thorcom-VR1000") diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 91ba42f688ac..adc90a3c5890 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/clk.h> #include <linux/sysdev.h> #include <linux/serial_core.h> @@ -40,6 +41,10 @@ #include <plat/clock.h> #include <plat/pll.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + /* Initial IO mappings */ static struct map_desc s3c2410_iodesc[] __initdata = { @@ -65,6 +70,9 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2410_map_io(void) { + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); } diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index 9a8c0657ae50..cef6a65637bd 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -16,7 +16,8 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ - !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412 + !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ + !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 config S3C2412_DMA diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 14f4798291aa..43160183571a 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -48,6 +48,7 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -357,8 +358,7 @@ static void jive_lcm_reset(unsigned int set) { printk(KERN_DEBUG "%s(%d)\n", __func__, set); - s3c2410_gpio_setpin(S3C2410_GPG(13), set); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT); + gpio_set_value(S3C2410_GPG(13), set); } #undef LCD_UPPER_MARGIN @@ -391,7 +391,7 @@ static struct ili9320_platdata jive_lcm_config = { static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs) { - s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1); + gpio_set_value(S3C2410_GPB(7), cs ? 0 : 1); } static struct s3c2410_spigpio_info jive_lcd_spi = { @@ -413,7 +413,7 @@ static struct platform_device jive_device_lcdspi = { static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs) { - s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1); + gpio_set_value(S3C2410_GPH(10), cs ? 0 : 1); } static struct s3c2410_spigpio_info jive_wm8750_spi = { @@ -531,7 +531,7 @@ static void jive_power_off(void) printk(KERN_INFO "powering system down...\n"); s3c2410_gpio_setpin(S3C2410_GPC(5), 1); - s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); } static void __init jive_machine_init(void) @@ -636,22 +636,22 @@ static void __init jive_machine_init(void) /* initialise the spi */ - s3c2410_gpio_setpin(S3C2410_GPG(13), 0); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT); + gpio_request(S3C2410_GPG(13), "lcm reset"); + gpio_direction_output(S3C2410_GPG(13), 0); - s3c2410_gpio_setpin(S3C2410_GPB(7), 1); - s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT); + gpio_request(S3C2410_GPB(7), "jive spi"); + gpio_direction_output(S3C2410_GPB(7), 1); s3c2410_gpio_setpin(S3C2410_GPB(6), 0); - s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPG(8), 1); - s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT); /* initialise the WM8750 spi */ - s3c2410_gpio_setpin(S3C2410_GPH(10), 1); - s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT); + gpio_request(S3C2410_GPH(10), "jive wm8750 spi"); + gpio_direction_output(S3C2410_GPH(10), 1); /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 0392065af1af..faddb36ed23b 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -85,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPF(2), 1); + gpio_set_value(S3C2410_GPF(2), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); + gpio_set_value(S3C2410_GPF(2), 0); break; case S3C2410_UDC_P_RESET : break; @@ -134,8 +134,8 @@ static void __init smdk2413_machine_init(void) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); - s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPF(2), "udc pull")); + gpio_direction_output(S3C2410_GPF(2), 0); s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | S3C2410_MISCCR_USBSUSPND0 | diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig new file mode 100644 index 000000000000..29103a6047de --- /dev/null +++ b/arch/arm/mach-s3c2416/Kconfig @@ -0,0 +1,38 @@ +# arch/arm/mach-s3c2416/Kconfig +# +# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com> +# +# Licensed under GPLv2 + +# note, this also supports the S3C2450 which is so similar it has the same +# ID code as the S3C2416. + +config CPU_S3C2416 + bool + depends on ARCH_S3C2410 + select CPU_ARM926T + select S3C2416_DMA if S3C2410_DMA + select CPU_LLSERIAL_S3C2440 + select S3C_GPIO_PULL_UPDOWN + select SAMSUNG_CLKSRC + select S3C2443_CLOCK + help + Support for the S3C2416 SoC from the S3C24XX line + +config S3C2416_DMA + bool + depends on CPU_S3C2416 + help + Internal config node for S3C2416 DMA support + +menu "S3C2416 Machines" + +config MACH_SMDK2416 + bool "SMDK2416" + select CPU_S3C2416 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + help + Say Y here if you are using an SMDK2416 + +endmenu diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile new file mode 100644 index 000000000000..6c12c7bf40ad --- /dev/null +++ b/arch/arm/mach-s3c2416/Makefile @@ -0,0 +1,19 @@ +# arch/arm/mach-s3c2416/Makefile +# +# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com> +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o +obj-$(CONFIG_CPU_S3C2416) += irq.o + +#obj-$(CONFIG_S3C2416_DMA) += dma.o + +# Machine support + +obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c new file mode 100644 index 000000000000..7ccf5a2a2bfc --- /dev/null +++ b/arch/arm/mach-s3c2416/clock.c @@ -0,0 +1,135 @@ +/* linux/arch/arm/mach-s3c2416/clock.c + * + * Copyright (c) 2010 Simtec Electronics + * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org> + * + * S3C2416 Clock control support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/clk.h> + +#include <plat/s3c2416.h> +#include <plat/s3c2443.h> +#include <plat/clock.h> +#include <plat/clock-clksrc.h> +#include <plat/cpu.h> + +#include <plat/cpu-freq.h> +#include <plat/pll6553x.h> +#include <plat/pll.h> + +#include <asm/mach/map.h> + +#include <mach/regs-clock.h> +#include <mach/regs-s3c2443-clock.h> + +static unsigned int armdiv[8] = { + [0] = 1, + [1] = 2, + [2] = 3, + [3] = 4, + [5] = 6, + [7] = 8, +}; + +/* ID to hardware numbering, 0 is HSMMC1, 1 is HSMMC0 */ +static struct clksrc_clk hsmmc_div[] = { + [0] = { + .clk = { + .name = "hsmmc-div", + .id = 1, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 }, + }, + [1] = { + .clk = { + .name = "hsmmc-div", + .id = 0, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, + }, +}; + +static struct clksrc_clk hsmmc_mux[] = { + [0] = { + .clk = { + .id = 1, + .name = "hsmmc-if", + .ctrlbit = (1 << 6), + .enable = s3c2443_clkcon_enable_s, + }, + .sources = &(struct clksrc_sources) { + .nr_sources = 2, + .sources = (struct clk *[]) { + [0] = &hsmmc_div[0].clk, + [1] = NULL, /* to fix */ + }, + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 }, + }, + [1] = { + .clk = { + .id = 0, + .name = "hsmmc-if", + .ctrlbit = (1 << 12), + .enable = s3c2443_clkcon_enable_s, + }, + .sources = &(struct clksrc_sources) { + .nr_sources = 2, + .sources = (struct clk *[]) { + [0] = &hsmmc_div[1].clk, + [1] = NULL, /* to fix */ + }, + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 }, + }, +}; + + +static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0) +{ + clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT; + + return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]; +} + +void __init_or_cpufreq s3c2416_setup_clocks(void) +{ + s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div); +} + + +static struct clksrc_clk *clksrcs[] __initdata = { + &hsmmc_div[0], + &hsmmc_div[1], + &hsmmc_mux[0], + &hsmmc_mux[1], +}; + +void __init s3c2416_init_clocks(int xtal) +{ + u32 epllcon = __raw_readl(S3C2443_EPLLCON); + u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4); + int ptr; + + /* s3c2416 EPLL compatible with s3c64xx */ + clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1); + + clk_epll.parent = &clk_epllref.clk; + + s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_register_clksrc(clksrcs[ptr], 1); + + s3c_pwmclk_init(); + +} diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c new file mode 100644 index 000000000000..89f521d59d06 --- /dev/null +++ b/arch/arm/mach-s3c2416/irq.c @@ -0,0 +1,254 @@ +/* linux/arch/arm/mach-s3c2416/irq.c + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <asm/irq.h> + +#include <asm/mach/irq.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> + +#include <plat/cpu.h> +#include <plat/pm.h> +#include <plat/irq.h> + +#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) + +static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len) +{ + unsigned int subsrc, submsk; + unsigned int end; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= (irq - S3C2410_IRQSUB(0)); + subsrc &= (1 << len)-1; + + end = len + irq; + + for (; irq < end && subsrc; irq++) { + if (subsrc & 1) + generic_handle_irq(irq); + + subsrc >>= 1; + } +} + +/* WDT/AC97 sub interrupts */ + +static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_WDT, 4); +} + +#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0)) +#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97) + +static void s3c2416_irq_wdtac97_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static void s3c2416_irq_wdtac97_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_WDTAC97); +} + +static void s3c2416_irq_wdtac97_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static struct irq_chip s3c2416_irq_wdtac97 = { + .mask = s3c2416_irq_wdtac97_mask, + .unmask = s3c2416_irq_wdtac97_unmask, + .ack = s3c2416_irq_wdtac97_ack, +}; + + +/* LCD sub interrupts */ + +static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4); +} + +#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) +#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4) + +static void s3c2416_irq_lcd_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD); +} + +static void s3c2416_irq_lcd_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_LCD); +} + +static void s3c2416_irq_lcd_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD); +} + +static struct irq_chip s3c2416_irq_lcd = { + .mask = s3c2416_irq_lcd_mask, + .unmask = s3c2416_irq_lcd_unmask, + .ack = s3c2416_irq_lcd_ack, +}; + + +/* DMA sub interrupts */ + +static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6); +} + +#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0)) +#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5) + + +static void s3c2416_irq_dma_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA); +} + +static void s3c2416_irq_dma_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_DMA); +} + +static void s3c2416_irq_dma_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA); +} + +static struct irq_chip s3c2416_irq_dma = { + .mask = s3c2416_irq_dma_mask, + .unmask = s3c2416_irq_dma_unmask, + .ack = s3c2416_irq_dma_ack, +}; + + +/* UART3 sub interrupts */ + +static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_UART3, 3); +} + +#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) +#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) + + +static void s3c2416_irq_uart3_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3); +} + +static void s3c2416_irq_uart3_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_UART3); +} + +static void s3c2416_irq_uart3_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3); +} + +static struct irq_chip s3c2416_irq_uart3 = { + .mask = s3c2416_irq_uart3_mask, + .unmask = s3c2416_irq_uart3_unmask, + .ack = s3c2416_irq_uart3_ack, +}; + + +/* IRQ initialisation code */ + +static int __init s3c2416_add_sub(unsigned int base, + void (*demux)(unsigned int, + struct irq_desc *), + struct irq_chip *chip, + unsigned int start, unsigned int end) +{ + unsigned int irqno; + + set_irq_chip(base, &s3c_irq_level_chip); + set_irq_handler(base, handle_level_irq); + set_irq_chained_handler(base, demux); + + for (irqno = start; irqno <= end; irqno++) { + set_irq_chip(irqno, chip); + set_irq_handler(irqno, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static int __init s3c2416_irq_add(struct sys_device *sysdev) +{ + printk(KERN_INFO "S3C2416: IRQ Support\n"); + + s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd, + IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4); + + s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma, + &s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5); + + s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3, + &s3c2416_irq_uart3, + IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3); + + s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97, + &s3c2416_irq_wdtac97, + IRQ_S3C2443_WDT, IRQ_S3C2443_AC97); + + return 0; +} + +static struct sysdev_driver s3c2416_irq_driver = { + .add = s3c2416_irq_add, +}; + +static int __init s3c2416_irq_init(void) +{ + return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_irq_driver); +} + +arch_initcall(s3c2416_irq_init); + diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c new file mode 100644 index 000000000000..99d24c44f30f --- /dev/null +++ b/arch/arm/mach-s3c2416/mach-smdk2416.c @@ -0,0 +1,150 @@ +/* linux/arch/arm/mach-s3c2416/mach-hanlin_v3c.c + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/mtd/partitions.h> +#include <linux/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <mach/regs-gpio.h> +#include <mach/regs-lcd.h> + +#include <mach/idle.h> +#include <mach/fb.h> +#include <mach/leds-gpio.h> +#include <plat/iic.h> + +#include <plat/s3c2416.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/nand.h> + +#include <plat/common-smdk.h> + +static struct map_desc smdk2416_iodesc[] __initdata = { + /* ISA IO Space map (memory space selected by A24) */ + + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + } +}; + +#define UCON (S3C2410_UCON_DEFAULT | \ + S3C2440_UCON_PCLK | \ + S3C2443_UCON_RXERR_IRQEN) + +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) + +#define UFCON (S3C2410_UFCON_RXTRIG8 | \ + S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_TXTRIG16) + +static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + /* IR port */ + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON | 0x50, + .ufcon = UFCON, + } +}; + +static struct platform_device *smdk2416_devices[] __initdata = { + &s3c_device_wdt, + &s3c_device_ohci, + &s3c_device_i2c0, + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, +}; + +static void __init smdk2416_map_io(void) +{ + + s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); + +} + +static void __init smdk2416_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + + gpio_request(S3C2410_GPB(4), "USBHost Power"); + gpio_direction_output(S3C2410_GPB(4), 1); + + platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices)); + smdk_machine_init(); +} + +MACHINE_START(SMDK2416, "SMDK2416") + /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + + .init_irq = s3c24xx_init_irq, + .map_io = smdk2416_map_io, + .init_machine = smdk2416_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c new file mode 100644 index 000000000000..3bff05745d0b --- /dev/null +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -0,0 +1,128 @@ +/* linux/arch/arm/mach-s3c2416/s3c2416.c + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>, + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> + * + * Samsung S3C2416 Mobile CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/sysdev.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <asm/proc-fns.h> +#include <asm/irq.h> + +#include <mach/reset.h> +#include <mach/idle.h> +#include <mach/regs-s3c2443-clock.h> + +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <plat/s3c2416.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#include <plat/iic-core.h> + +static struct map_desc s3c2416_iodesc[] __initdata = { + IODESC_ENT(WATCHDOG), + IODESC_ENT(CLKPWR), + IODESC_ENT(TIMER), +}; + +struct sysdev_class s3c2416_sysclass = { + .name = "s3c2416-core", +}; + +static struct sys_device s3c2416_sysdev = { + .cls = &s3c2416_sysclass, +}; + +static void s3c2416_hard_reset(void) +{ + __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); +} + +int __init s3c2416_init(void) +{ + printk(KERN_INFO "S3C2416: Initializing architecture\n"); + + s3c24xx_reset_hook = s3c2416_hard_reset; + /* s3c24xx_idle = s3c2416_idle; */ + + /* change WDT IRQ number */ + s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; + s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; + + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + + return sysdev_register(&s3c2416_sysdev); +} + +void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); + + s3c_device_nand.name = "s3c2416-nand"; +} + +/* s3c2416_map_io + * + * register the standard cpu IO areas, and any passed in from the + * machine specific initialisation. + */ + +void __init s3c2416_map_io(void) +{ + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown; + + iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); +} + +/* need to register class before we actually register the device, and + * we also need to ensure that it has been initialised before any of the + * drivers even try to use it (even if not on an s3c2416 based system) + * as a driver which may support both 2443 and 2440 may try and use it. +*/ + +static int __init s3c2416_core_init(void) +{ + return sysdev_class_register(&s3c2416_sysclass); +} + +core_initcall(s3c2416_core_init); diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 7f465265cf04..9d102b912091 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -6,6 +6,7 @@ config CPU_S3C2440 bool depends on ARCH_S3C2410 select CPU_ARM920T + select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM select S3C2410_GPIO diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 571b17683d96..a76bcda210ad 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -53,6 +53,7 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -102,10 +103,10 @@ static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + gpio_set_value(S3C2410_GPC(5), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPC(5), 0); + gpio_set_value(S3C2410_GPC(5), 0); break; case S3C2410_UDC_P_RESET : break; @@ -632,25 +633,25 @@ static void __init mini2440_init(void) mini2440_parse_features(&features, mini2440_features_str); /* turn LCD on */ - s3c2410_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); + s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); /* Turn the backlight early on */ - s3c2410_gpio_setpin(S3C2410_GPG(4), 1); - s3c2410_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPG(4), "backlight")); + gpio_direction_output(S3C2410_GPG(4), 1); /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ - s3c2410_gpio_pullup(S3C2410_GPB(1), 0); + s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); s3c2410_gpio_setpin(S3C2410_GPB(1), 0); - s3c2410_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); /* Make sure the D+ pullup pin is output */ - s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup")); + gpio_direction_output(S3C2410_GPC(5), 0); /* mark the key as input, without pullups (there is one on the board) */ for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { - s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0); - s3c2410_gpio_cfgpin(mini2440_buttons[i].gpio, - S3C2410_GPIO_INPUT); + s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT); } if (features.lcd_index != -1) { int li; diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 342041593f22..3ff62de45fde 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -40,6 +40,7 @@ #include <plat/regs-serial.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> #include <plat/s3c2410.h> #include <plat/s3c244x.h> #include <plat/clock.h> @@ -122,15 +123,15 @@ static void __init nexcoder_sensorboard_init(void) { // Initialize SCCB bus s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL - s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA - s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT); // Power up the sensor board s3c2410_gpio_setpin(S3C2410_GPF(1), 1); - s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN + s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN s3c2410_gpio_setpin(S3C2410_GPF(2), 0); - s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN + s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN } static void __init nexcoder_map_io(void) diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index f35371db33f5..319458da71a0 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -49,6 +49,7 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -298,7 +299,7 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state) /* ensure that an nRESET is not generated on resume. */ s3c2410_gpio_setpin(S3C2410_GPA(21), 1); - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); return 0; } @@ -310,7 +311,7 @@ static int osiris_pm_resume(struct sys_device *sd) __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0); - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); return 0; } diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index 2b68f7ea45ae..d50f3ae6173d 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/sysdev.h> +#include <linux/gpio.h> #include <linux/clk.h> #include <linux/io.h> @@ -33,6 +34,10 @@ #include <plat/cpu.h> #include <plat/s3c244x.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + static struct sys_device s3c2440_sysdev = { .cls = &s3c2440_sysclass, }; @@ -41,6 +46,9 @@ int __init s3c2440_init(void) { printk("S3C2440: Initialising architecture\n"); + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + /* change irq for watchdog */ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 698140af247c..4fef723126fa 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -8,6 +8,7 @@ config CPU_S3C2443 select S3C2443_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 select SAMSUNG_CLKSRC + select S3C2443_CLOCK help Support for the S3C2443 SoC from the S3C24XX line diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 62cd4eaee01b..83b1aa63d778 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -21,6 +21,7 @@ */ #include <linux/init.h> + #include <linux/module.h> #include <linux/kernel.h> #include <linux/list.h> @@ -54,111 +55,13 @@ * set the correct muxing at initialisation */ -static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) -{ - u32 ctrlbit = clk->ctrlbit; - u32 con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -static int s3c2443_clkcon_enable_h(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_HCLKCON, clk, enable); -} - -static int s3c2443_clkcon_enable_p(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_PCLKCON, clk, enable); -} - -static int s3c2443_clkcon_enable_s(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_SCLKCON, clk, enable); -} - /* clock selections */ -/* mpllref is a direct descendant of clk_xtal by default, but it is not - * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as - * such directly equating the two source clocks is impossible. - */ -static struct clk clk_mpllref = { - .name = "mpllref", - .parent = &clk_xtal, - .id = -1, -}; - static struct clk clk_i2s_ext = { .name = "i2s-ext", .id = -1, }; -static struct clk *clk_epllref_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpllref, - [2] = &clk_xtal, - [3] = &clk_ext, -}; - -static struct clksrc_clk clk_epllref = { - .clk = { - .name = "epllref", - .id = -1, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_epllref_sources, - .nr_sources = ARRAY_SIZE(clk_epllref_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, -}; - -static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV0); - - div &= S3C2443_CLKDIV0_EXTDIV_MASK; - div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ - - return parent_rate / (div + 1); -} - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_mpllref, - .id = -1, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_getrate_mdivclk, - }, -}; - -static struct clk *clk_msysclk_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpll, - [2] = &clk_mdivclk, - [3] = &clk_mpllref, -}; - -static struct clksrc_clk clk_msysclk = { - .clk = { - .name = "msysclk", - .parent = &clk_xtal, - .id = -1, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_msysclk_sources, - .nr_sources = ARRAY_SIZE(clk_msysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, -}; - /* armdiv * * this clock is sourced from msysclk and can have a number of @@ -266,44 +169,6 @@ static struct clksrc_clk clk_arm = { .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, }; -/* esysclk - * - * this is sourced from either the EPLL or the EPLLref clock -*/ - -static struct clk *clk_sysclk_sources[] = { - [0] = &clk_epllref.clk, - [1] = &clk_epll, -}; - -static struct clksrc_clk clk_esysclk = { - .clk = { - .name = "esysclk", - .parent = &clk_epll, - .id = -1, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_sysclk_sources, - .nr_sources = ARRAY_SIZE(clk_sysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, -}; - -/* uartclk - * - * UART baud-rate clock sourced from esysclk via a divisor -*/ - -static struct clksrc_clk clk_uart = { - .clk = { - .name = "uartclk", - .id = -1, - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, -}; - - /* hsspi * * high-speed spi clock, sourced from esysclk @@ -320,21 +185,6 @@ static struct clksrc_clk clk_hsspi = { .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, }; -/* usbhost - * - * usb host bus-clock, usually 48MHz to provide USB bus clock timing -*/ - -static struct clksrc_clk clk_usb_bus_host = { - .clk = { - .name = "usb-bus-host-parent", - .id = -1, - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_USBHOST, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; /* clk_hsmcc_div * @@ -433,89 +283,16 @@ static struct clksrc_clk clk_i2s = { .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, }; -/* cam-if - * - * camera interface bus-clock, divided down from esysclk -*/ - -static struct clksrc_clk clk_cam = { - .clk = { - .name = "camif-upll", /* same as 2440 name */ - .id = -1, - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_CAMCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, -}; - -/* display-if - * - * display interface clock, divided from esysclk -*/ - -static struct clksrc_clk clk_display = { - .clk = { - .name = "display-if", - .id = -1, - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_DISPCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, -}; - -/* prediv - * - * this divides the msysclk down to pass to h/p/etc. - */ - -static unsigned long s3c2443_prediv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; - clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; - - return rate / (clkdiv0 + 1); -} - -static struct clk clk_prediv = { - .name = "prediv", - .id = -1, - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_prediv_getrate, - }, -}; - /* standard clock definitions */ -static struct clk init_clocks_disable[] = { +static struct clk init_clocks_off[] = { { - .name = "nand", - .id = -1, - .parent = &clk_h, - }, { .name = "sdi", .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SDI, }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_ADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIC, - }, { .name = "iis", .id = -1, .parent = &clk_p, @@ -537,179 +314,12 @@ static struct clk init_clocks_disable[] = { }; static struct clk init_clocks[] = { - { - .name = "dma", - .id = 0, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA0, - }, { - .name = "dma", - .id = 1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA1, - }, { - .name = "dma", - .id = 2, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA2, - }, { - .name = "dma", - .id = 3, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA3, - }, { - .name = "dma", - .id = 4, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA4, - }, { - .name = "dma", - .id = 5, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA5, - }, { - .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_LCDC, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_GPIO, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBH, - }, { - .name = "usb-device", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBD, - }, { - .name = "hsmmc", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_HSMMC, - }, { - .name = "cfc", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_CFC, - }, { - .name = "ssmc", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_SSMC, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_PWMT, - }, { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART3, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_RTC, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_WDT, - }, { - .name = "usb-bus-host", - .id = -1, - .parent = &clk_usb_bus_host.clk, - }, { - .name = "ac97", - .id = -1, - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_AC97, - } -}; - -/* clocks to add where we need to check their parentage */ - -static struct clksrc_clk __initdata *init_list[] = { - &clk_epllref, /* should be first */ - &clk_esysclk, - &clk_msysclk, - &clk_arm, - &clk_i2s_eplldiv, - &clk_i2s, - &clk_cam, - &clk_uart, - &clk_display, - &clk_hsmmc_div, - &clk_usb_bus_host, }; -static void __init s3c2443_clk_initparents(void) -{ - int ptr; - - for (ptr = 0; ptr < ARRAY_SIZE(init_list); ptr++) - s3c_set_clksrc(init_list[ptr], true); -} - -static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) -{ - clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return clkcon0 + 1; -} - /* clocks to add straight away */ static struct clksrc_clk *clksrcs[] __initdata = { - &clk_usb_bus_host, - &clk_epllref, - &clk_esysclk, - &clk_msysclk, &clk_arm, - &clk_uart, - &clk_display, - &clk_cam, &clk_i2s_eplldiv, &clk_i2s, &clk_hsspi, @@ -717,92 +327,32 @@ static struct clksrc_clk *clksrcs[] __initdata = { }; static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_usb_bus, - &clk_mpllref, &clk_hsmmc, &clk_armdiv, - &clk_prediv, }; void __init_or_cpufreq s3c2443_setup_clocks(void) { - unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - struct clk *xtal_clk; - unsigned long xtal; - unsigned long pll; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - pll = s3c2443_get_mpll(mpllcon, xtal); - clk_msysclk.clk.rate = pll; - - fclk = pll / s3c2443_fclk_div(clkdiv0); - hclk = s3c2443_prediv_getrate(&clk_prediv); - hclk /= s3c2443_get_hdiv(clkdiv0); - pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); - - s3c24xx_setup_clocks(fclk, hclk, pclk); - - printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", - print_mhz(pll), print_mhz(fclk), - print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); + s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div); } void __init s3c2443_init_clocks(int xtal) { - struct clk *clkp; unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - int ret; int ptr; - /* s3c2443 parents h and p clocks from prediv */ - clk_h.parent = &clk_prediv; - clk_p.parent = &clk_prediv; + clk_epll.rate = s3c2443_get_epll(epllcon, xtal); + clk_epll.parent = &clk_epllref.clk; + + s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div); - s3c24xx_register_baseclocks(xtal); s3c2443_setup_clocks(); - s3c2443_clk_initparents(); - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) s3c_register_clksrc(clksrcs[ptr], 1); - clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - clk_epll.parent = &clk_epllref.clk; - clk_usb_bus.parent = &clk_usb_bus_host.clk; - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); - clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); - } - - printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off":"on", - print_mhz(clk_get_rate(&clk_epll)), - print_mhz(clk_get_rate(&clk_usb_bus))); - /* register clocks from clock array */ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); @@ -819,17 +369,8 @@ void __init s3c2443_init_clocks(int xtal) /* install (and disable) the clocks we do not need immediately */ - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - (clkp->enable)(clkp, 0); - } + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c index 66e6794481d2..60c929a3cab6 100644 --- a/arch/arm/mach-s3c64xx/gpiolib.c +++ b/arch/arm/mach-s3c64xx/gpiolib.c @@ -51,6 +51,7 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -58,12 +59,14 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { .cfg_eint = 7, .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { .cfg_eint = 3, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_config = s3c_gpio_setcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, @@ -171,6 +174,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = { static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -178,6 +182,7 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { .cfg_eint = 2, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -185,6 +190,7 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { .cfg_eint = 3, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h index 90bbd72fdc4e..5ef0bb698ee0 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pll.h +++ b/arch/arm/mach-s3c64xx/include/mach/pll.h @@ -20,6 +20,7 @@ #define S3C6400_PLL_SDIV_SHIFT (0) #include <asm/div64.h> +#include <plat/pll6553x.h> static inline unsigned long s3c6400_get_pll(unsigned long baseclk, u32 pllcon) @@ -37,38 +38,8 @@ static inline unsigned long s3c6400_get_pll(unsigned long baseclk, return (unsigned long)fvco; } -#define S3C6400_EPLL_MDIV_MASK ((1 << (23-16)) - 1) -#define S3C6400_EPLL_PDIV_MASK ((1 << (13-8)) - 1) -#define S3C6400_EPLL_SDIV_MASK ((1 << (2-0)) - 1) -#define S3C6400_EPLL_MDIV_SHIFT (16) -#define S3C6400_EPLL_PDIV_SHIFT (8) -#define S3C6400_EPLL_SDIV_SHIFT (0) -#define S3C6400_EPLL_KDIV_MASK (0xffff) - static inline unsigned long s3c6400_get_epll(unsigned long baseclk) { - unsigned long result; - u32 epll0 = __raw_readl(S3C_EPLL_CON0); - u32 epll1 = __raw_readl(S3C_EPLL_CON1); - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK; - pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK; - sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK; - kdiv = epll1 & S3C6400_EPLL_KDIV_MASK; - - /* We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; + return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0), + __raw_readl(S3C_EPLL_CON1)); } diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c index b0ea741177ad..262dc75d5bea 100644 --- a/arch/arm/mach-s5p6440/gpio.c +++ b/arch/arm/mach-s5p6440/gpio.c @@ -161,12 +161,15 @@ static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { }, { .cfg_eint = 0, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, { .cfg_eint = 2, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, { .cfg_eint = 3, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, }; @@ -279,6 +282,8 @@ void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) for (; nr_chips > 0; nr_chips--, chipcfg++) { if (!chipcfg->set_config) chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; + if (!chipcfg->get_config) + chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit; if (!chipcfg->set_pull) chipcfg->set_pull = s3c_gpio_setpull_updown; if (!chipcfg->get_pull) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index aeceb9b92aeb..f2b88c5fe142 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -7,7 +7,6 @@ config ARCH_SH7367 select CPU_V6 select HAVE_CLK select COMMON_CLKDEV - select GENERIC_TIME select GENERIC_CLOCKEVENTS config ARCH_SH7377 @@ -15,7 +14,6 @@ config ARCH_SH7377 select CPU_V7 select HAVE_CLK select COMMON_CLKDEV - select GENERIC_TIME select GENERIC_CLOCKEVENTS config ARCH_SH7372 @@ -23,7 +21,6 @@ config ARCH_SH7372 select CPU_V7 select HAVE_CLK select COMMON_CLKDEV - select GENERIC_TIME select GENERIC_CLOCKEVENTS comment "SH-Mobile Board Type" diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig new file mode 100644 index 000000000000..20d1317cc486 --- /dev/null +++ b/arch/arm/mach-spear3xx/Kconfig @@ -0,0 +1,33 @@ +# +# SPEAr3XX Machine configuration file +# + +if ARCH_SPEAR3XX + +choice + prompt "SPEAr3XX Family" + default MACH_SPEAR300 + +config MACH_SPEAR300 + bool "SPEAr300" + help + Supports ST SPEAr300 Machine + +config MACH_SPEAR310 + bool "SPEAr310" + help + Supports ST SPEAr310 Machine + +config MACH_SPEAR320 + bool "SPEAr320" + help + Supports ST SPEAr320 Machine + +endchoice + +# Adding SPEAr3XX machine specific configuration files +source "arch/arm/mach-spear3xx/Kconfig300" +source "arch/arm/mach-spear3xx/Kconfig310" +source "arch/arm/mach-spear3xx/Kconfig320" + +endif #ARCH_SPEAR3XX diff --git a/arch/arm/mach-spear3xx/Kconfig300 b/arch/arm/mach-spear3xx/Kconfig300 new file mode 100644 index 000000000000..c519a05b4ab4 --- /dev/null +++ b/arch/arm/mach-spear3xx/Kconfig300 @@ -0,0 +1,17 @@ +# +# SPEAr300 machine configuration file +# + +if MACH_SPEAR300 + +choice + prompt "SPEAr300 Boards" + default BOARD_SPEAR300_EVB + +config BOARD_SPEAR300_EVB + bool "SPEAr300 Evaluation Board" + help + Supports ST SPEAr300 Evaluation Board +endchoice + +endif #MACH_SPEAR300 diff --git a/arch/arm/mach-spear3xx/Kconfig310 b/arch/arm/mach-spear3xx/Kconfig310 new file mode 100644 index 000000000000..60e7442d75bd --- /dev/null +++ b/arch/arm/mach-spear3xx/Kconfig310 @@ -0,0 +1,17 @@ +# +# SPEAr310 machine configuration file +# + +if MACH_SPEAR310 + +choice + prompt "SPEAr310 Boards" + default BOARD_SPEAR310_EVB + +config BOARD_SPEAR310_EVB + bool "SPEAr310 Evaluation Board" + help + Supports ST SPEAr310 Evaluation Board +endchoice + +endif #MACH_SPEAR310 diff --git a/arch/arm/mach-spear3xx/Kconfig320 b/arch/arm/mach-spear3xx/Kconfig320 new file mode 100644 index 000000000000..1c1d438399b8 --- /dev/null +++ b/arch/arm/mach-spear3xx/Kconfig320 @@ -0,0 +1,17 @@ +# +# SPEAr320 machine configuration file +# + +if MACH_SPEAR320 + +choice + prompt "SPEAr320 Boards" + default BOARD_SPEAR320_EVB + +config BOARD_SPEAR320_EVB + bool "SPEAr320 Evaluation Board" + help + Supports ST SPEAr320 Evaluation Board +endchoice + +endif #MACH_SPEAR320 diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile new file mode 100644 index 000000000000..b24862489704 --- /dev/null +++ b/arch/arm/mach-spear3xx/Makefile @@ -0,0 +1,26 @@ +# +# Makefile for SPEAr3XX machine series +# + +# common files +obj-y += spear3xx.o clock.o + +# spear300 specific files +obj-$(CONFIG_MACH_SPEAR300) += spear300.o + +# spear300 boards files +obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o + + +# spear310 specific files +obj-$(CONFIG_MACH_SPEAR310) += spear310.o + +# spear310 boards files +obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o + + +# spear320 specific files +obj-$(CONFIG_MACH_SPEAR320) += spear320.o + +# spear320 boards files +obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot new file mode 100644 index 000000000000..7a1f3c0eadb8 --- /dev/null +++ b/arch/arm/mach-spear3xx/Makefile.boot @@ -0,0 +1,3 @@ +zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c new file mode 100644 index 000000000000..39f6ccf22294 --- /dev/null +++ b/arch/arm/mach-spear3xx/clock.c @@ -0,0 +1,389 @@ +/* + * arch/arm/mach-spear3xx/clock.c + * + * SPEAr3xx machines clock framework source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <mach/misc_regs.h> +#include <plat/clock.h> + +/* root clks */ +/* 32 KHz oscillator clock */ +static struct clk osc_32k_clk = { + .flags = ALWAYS_ENABLED, + .rate = 32000, +}; + +/* 24 MHz oscillator clock */ +static struct clk osc_24m_clk = { + .flags = ALWAYS_ENABLED, + .rate = 24000000, +}; + +/* clock derived from 32 KHz osc clk */ +/* rtc clock */ +static struct clk rtc_clk = { + .pclk = &osc_32k_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = RTC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clock derived from 24 MHz osc clk */ +/* pll1 configuration structure */ +static struct pll_clk_config pll1_config = { + .mode_reg = PLL1_CTR, + .cfg_reg = PLL1_FRQ, +}; + +/* PLL1 clock */ +static struct clk pll1_clk = { + .pclk = &osc_24m_clk, + .en_reg = PLL1_CTR, + .en_reg_bit = PLL_ENABLE, + .recalc = &pll1_clk_recalc, + .private_data = &pll1_config, +}; + +/* PLL3 48 MHz clock */ +static struct clk pll3_48m_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &osc_24m_clk, + .rate = 48000000, +}; + +/* watch dog timer clock */ +static struct clk wdt_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &osc_24m_clk, + .recalc = &follow_parent, +}; + +/* clock derived from pll1 clk */ +/* cpu clock */ +static struct clk cpu_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .recalc = &follow_parent, +}; + +/* ahb configuration structure */ +static struct bus_clk_config ahb_config = { + .reg = CORE_CLK_CFG, + .mask = PLL_HCLK_RATIO_MASK, + .shift = PLL_HCLK_RATIO_SHIFT, +}; + +/* ahb clock */ +static struct clk ahb_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .recalc = &bus_clk_recalc, + .private_data = &ahb_config, +}; + +/* uart configurations */ +static struct aux_clk_config uart_config = { + .synth_reg = UART_CLK_SYNT, +}; + +/* uart parents */ +static struct pclk_info uart_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* uart parent select structure */ +static struct pclk_sel uart_pclk_sel = { + .pclk_info = uart_pclk_info, + .pclk_count = ARRAY_SIZE(uart_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = UART_CLK_MASK, +}; + +/* uart clock */ +static struct clk uart_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = UART_CLK_ENB, + .pclk_sel = &uart_pclk_sel, + .pclk_sel_shift = UART_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &uart_config, +}; + +/* firda configurations */ +static struct aux_clk_config firda_config = { + .synth_reg = FIRDA_CLK_SYNT, +}; + +/* firda parents */ +static struct pclk_info firda_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* firda parent select structure */ +static struct pclk_sel firda_pclk_sel = { + .pclk_info = firda_pclk_info, + .pclk_count = ARRAY_SIZE(firda_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = FIRDA_CLK_MASK, +}; + +/* firda clock */ +static struct clk firda_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = FIRDA_CLK_ENB, + .pclk_sel = &firda_pclk_sel, + .pclk_sel_shift = FIRDA_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &firda_config, +}; + +/* gpt parents */ +static struct pclk_info gpt_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* gpt parent select structure */ +static struct pclk_sel gpt_pclk_sel = { + .pclk_info = gpt_pclk_info, + .pclk_count = ARRAY_SIZE(gpt_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = GPT_CLK_MASK, +}; + +/* gpt0 configurations */ +static struct aux_clk_config gpt0_config = { + .synth_reg = PRSC1_CLK_CFG, +}; + +/* gpt0 timer clock */ +static struct clk gpt0_clk = { + .flags = ALWAYS_ENABLED, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT0_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt0_config, +}; + +/* gpt1 configurations */ +static struct aux_clk_config gpt1_config = { + .synth_reg = PRSC2_CLK_CFG, +}; + +/* gpt1 timer clock */ +static struct clk gpt1_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPT1_CLK_ENB, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT1_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt1_config, +}; + +/* gpt2 configurations */ +static struct aux_clk_config gpt2_config = { + .synth_reg = PRSC3_CLK_CFG, +}; + +/* gpt2 timer clock */ +static struct clk gpt2_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPT2_CLK_ENB, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT2_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt2_config, +}; + +/* clock derived from pll3 clk */ +/* usbh clock */ +static struct clk usbh_clk = { + .pclk = &pll3_48m_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = USBH_CLK_ENB, + .recalc = &follow_parent, +}; + +/* usbd clock */ +static struct clk usbd_clk = { + .pclk = &pll3_48m_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = USBD_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clcd clock */ +static struct clk clcd_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll3_48m_clk, + .recalc = &follow_parent, +}; + +/* clock derived from ahb clk */ +/* apb configuration structure */ +static struct bus_clk_config apb_config = { + .reg = CORE_CLK_CFG, + .mask = HCLK_PCLK_RATIO_MASK, + .shift = HCLK_PCLK_RATIO_SHIFT, +}; + +/* apb clock */ +static struct clk apb_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &ahb_clk, + .recalc = &bus_clk_recalc, + .private_data = &apb_config, +}; + +/* i2c clock */ +static struct clk i2c_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = I2C_CLK_ENB, + .recalc = &follow_parent, +}; + +/* dma clock */ +static struct clk dma_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = DMA_CLK_ENB, + .recalc = &follow_parent, +}; + +/* jpeg clock */ +static struct clk jpeg_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = JPEG_CLK_ENB, + .recalc = &follow_parent, +}; + +/* gmac clock */ +static struct clk gmac_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GMAC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* smi clock */ +static struct clk smi_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SMI_CLK_ENB, + .recalc = &follow_parent, +}; + +/* c3 clock */ +static struct clk c3_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = C3_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clock derived from apb clk */ +/* adc clock */ +static struct clk adc_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = ADC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* ssp clock */ +static struct clk ssp_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SSP_CLK_ENB, + .recalc = &follow_parent, +}; + +/* gpio clock */ +static struct clk gpio_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPIO_CLK_ENB, + .recalc = &follow_parent, +}; + +/* array of all spear 3xx clock lookups */ +static struct clk_lookup spear_clk_lookups[] = { + /* root clks */ + { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, + { .con_id = "osc_24m_clk", .clk = &osc_24m_clk}, + /* clock derived from 32 KHz osc clk */ + { .dev_id = "rtc", .clk = &rtc_clk}, + /* clock derived from 24 MHz osc clk */ + { .con_id = "pll1_clk", .clk = &pll1_clk}, + { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, + { .dev_id = "wdt", .clk = &wdt_clk}, + /* clock derived from pll1 clk */ + { .con_id = "cpu_clk", .clk = &cpu_clk}, + { .con_id = "ahb_clk", .clk = &ahb_clk}, + { .dev_id = "uart", .clk = &uart_clk}, + { .dev_id = "firda", .clk = &firda_clk}, + { .dev_id = "gpt0", .clk = &gpt0_clk}, + { .dev_id = "gpt1", .clk = &gpt1_clk}, + { .dev_id = "gpt2", .clk = &gpt2_clk}, + /* clock derived from pll3 clk */ + { .dev_id = "usbh", .clk = &usbh_clk}, + { .dev_id = "usbd", .clk = &usbd_clk}, + { .dev_id = "clcd", .clk = &clcd_clk}, + /* clock derived from ahb clk */ + { .con_id = "apb_clk", .clk = &apb_clk}, + { .dev_id = "i2c", .clk = &i2c_clk}, + { .dev_id = "dma", .clk = &dma_clk}, + { .dev_id = "jpeg", .clk = &jpeg_clk}, + { .dev_id = "gmac", .clk = &gmac_clk}, + { .dev_id = "smi", .clk = &smi_clk}, + { .dev_id = "c3", .clk = &c3_clk}, + /* clock derived from apb clk */ + { .dev_id = "adc", .clk = &adc_clk}, + { .dev_id = "ssp", .clk = &ssp_clk}, + { .dev_id = "gpio", .clk = &gpio_clk}, +}; + +void __init clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + recalc_root_clocks(); +} diff --git a/arch/arm/mach-spear3xx/include/mach/clkdev.h b/arch/arm/mach-spear3xx/include/mach/clkdev.h new file mode 100644 index 000000000000..a3d07339d9f1 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/clkdev.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/clkdev.h + * + * Clock Dev framework definitions for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +#include <plat/clkdev.h> + +#endif /* __MACH_CLKDEV_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S new file mode 100644 index 000000000000..590519f10d6e --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S @@ -0,0 +1,14 @@ +/* + * arch/arm/mach-spear3xx/include/mach/debug-macro.S + * + * Debugging macro include header spear3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S new file mode 100644 index 000000000000..947625d6b48d --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S @@ -0,0 +1,46 @@ +/* + * arch/arm/mach-spear3xx/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/hardware.h> +#include <mach/spear.h> +#include <asm/hardware/vic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =VA_SPEAR3XX_ML1_VIC_BASE + ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status + teq \irqstat, #0 + beq 1001f @ this will set/reset + @ zero register + /* + * Following code will find bit position of least significang + * bit set in irqstat, using following equation + * least significant bit set in n = (n & ~(n-1)) + */ + sub \tmp, \irqstat, #1 @ tmp = irqstat - 1 + mvn \tmp, \tmp @ tmp = ~tmp + and \irqstat, \irqstat, \tmp @ irqstat &= tmp + /* Now, irqstat is = bit no. of 1st bit set in vic irq status */ + clz \tmp, \irqstat @ tmp = leading zeros + rsb \irqnr, \tmp, #0x1F @ irqnr = 32 - tmp - 1 + +1001: /* EQ will be set if no irqs pending */ + .endm diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h new file mode 100644 index 000000000000..af7e02c909a3 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -0,0 +1,205 @@ +/* + * arch/arm/mach-spear3xx/generic.h + * + * SPEAr3XX machine family generic header file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_GENERIC_H +#define __MACH_GENERIC_H + +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <plat/padmux.h> + +/* spear3xx declarations */ +/* + * Each GPT has 2 timer channels + * Following GPT channels will be used as clock source and clockevent + */ +#define SPEAR_GPT0_BASE SPEAR3XX_ML1_TMR_BASE +#define SPEAR_GPT0_CHAN0_IRQ IRQ_CPU_GPT1_1 +#define SPEAR_GPT0_CHAN1_IRQ IRQ_CPU_GPT1_2 + +/* Add spear3xx family device structure declarations here */ +extern struct amba_device gpio_device; +extern struct amba_device uart_device; +extern struct sys_timer spear_sys_timer; + +/* Add spear3xx family function declarations here */ +void __init clk_init(void); +void __init spear3xx_map_io(void); +void __init spear3xx_init_irq(void); +void __init spear3xx_init(void); +void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size); + +/* pad mux declarations */ +#define PMX_FIRDA_MASK (1 << 14) +#define PMX_I2C_MASK (1 << 13) +#define PMX_SSP_CS_MASK (1 << 12) +#define PMX_SSP_MASK (1 << 11) +#define PMX_MII_MASK (1 << 10) +#define PMX_GPIO_PIN0_MASK (1 << 9) +#define PMX_GPIO_PIN1_MASK (1 << 8) +#define PMX_GPIO_PIN2_MASK (1 << 7) +#define PMX_GPIO_PIN3_MASK (1 << 6) +#define PMX_GPIO_PIN4_MASK (1 << 5) +#define PMX_GPIO_PIN5_MASK (1 << 4) +#define PMX_UART0_MODEM_MASK (1 << 3) +#define PMX_UART0_MASK (1 << 2) +#define PMX_TIMER_3_4_MASK (1 << 1) +#define PMX_TIMER_1_2_MASK (1 << 0) + +/* pad mux devices */ +extern struct pmx_dev pmx_firda; +extern struct pmx_dev pmx_i2c; +extern struct pmx_dev pmx_ssp_cs; +extern struct pmx_dev pmx_ssp; +extern struct pmx_dev pmx_mii; +extern struct pmx_dev pmx_gpio_pin0; +extern struct pmx_dev pmx_gpio_pin1; +extern struct pmx_dev pmx_gpio_pin2; +extern struct pmx_dev pmx_gpio_pin3; +extern struct pmx_dev pmx_gpio_pin4; +extern struct pmx_dev pmx_gpio_pin5; +extern struct pmx_dev pmx_uart0_modem; +extern struct pmx_dev pmx_uart0; +extern struct pmx_dev pmx_timer_3_4; +extern struct pmx_dev pmx_timer_1_2; + +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) +/* padmux plgpio devices */ +extern struct pmx_dev pmx_plgpio_0_1; +extern struct pmx_dev pmx_plgpio_2_3; +extern struct pmx_dev pmx_plgpio_4_5; +extern struct pmx_dev pmx_plgpio_6_9; +extern struct pmx_dev pmx_plgpio_10_27; +extern struct pmx_dev pmx_plgpio_28; +extern struct pmx_dev pmx_plgpio_29; +extern struct pmx_dev pmx_plgpio_30; +extern struct pmx_dev pmx_plgpio_31; +extern struct pmx_dev pmx_plgpio_32; +extern struct pmx_dev pmx_plgpio_33; +extern struct pmx_dev pmx_plgpio_34_36; +extern struct pmx_dev pmx_plgpio_37_42; +extern struct pmx_dev pmx_plgpio_43_44_47_48; +extern struct pmx_dev pmx_plgpio_45_46_49_50; +#endif + +extern struct pmx_driver pmx_driver; + +/* spear300 declarations */ +#ifdef CONFIG_MACH_SPEAR300 +/* Add spear300 machine device structure declarations here */ +extern struct amba_device gpio1_device; + +/* pad mux modes */ +extern struct pmx_mode nand_mode; +extern struct pmx_mode nor_mode; +extern struct pmx_mode photo_frame_mode; +extern struct pmx_mode lend_ip_phone_mode; +extern struct pmx_mode hend_ip_phone_mode; +extern struct pmx_mode lend_wifi_phone_mode; +extern struct pmx_mode hend_wifi_phone_mode; +extern struct pmx_mode ata_pabx_wi2s_mode; +extern struct pmx_mode ata_pabx_i2s_mode; +extern struct pmx_mode caml_lcdw_mode; +extern struct pmx_mode camu_lcd_mode; +extern struct pmx_mode camu_wlcd_mode; +extern struct pmx_mode caml_lcd_mode; + +/* pad mux devices */ +extern struct pmx_dev pmx_fsmc_2_chips; +extern struct pmx_dev pmx_fsmc_4_chips; +extern struct pmx_dev pmx_keyboard; +extern struct pmx_dev pmx_clcd; +extern struct pmx_dev pmx_telecom_gpio; +extern struct pmx_dev pmx_telecom_tdm; +extern struct pmx_dev pmx_telecom_spi_cs_i2c_clk; +extern struct pmx_dev pmx_telecom_camera; +extern struct pmx_dev pmx_telecom_dac; +extern struct pmx_dev pmx_telecom_i2s; +extern struct pmx_dev pmx_telecom_boot_pins; +extern struct pmx_dev pmx_telecom_sdio_4bit; +extern struct pmx_dev pmx_telecom_sdio_8bit; +extern struct pmx_dev pmx_gpio1; + +void spear300_pmx_init(void); + +/* Add spear300 machine function declarations here */ +void __init spear300_init(void); + +#endif /* CONFIG_MACH_SPEAR300 */ + +/* spear310 declarations */ +#ifdef CONFIG_MACH_SPEAR310 +/* Add spear310 machine device structure declarations here */ + +/* pad mux devices */ +extern struct pmx_dev pmx_emi_cs_0_1_4_5; +extern struct pmx_dev pmx_emi_cs_2_3; +extern struct pmx_dev pmx_uart1; +extern struct pmx_dev pmx_uart2; +extern struct pmx_dev pmx_uart3_4_5; +extern struct pmx_dev pmx_fsmc; +extern struct pmx_dev pmx_rs485_0_1; +extern struct pmx_dev pmx_tdm0; + +void spear310_pmx_init(void); + +/* Add spear310 machine function declarations here */ +void __init spear310_init(void); + +#endif /* CONFIG_MACH_SPEAR310 */ + +/* spear320 declarations */ +#ifdef CONFIG_MACH_SPEAR320 +/* Add spear320 machine device structure declarations here */ + +/* pad mux modes */ +extern struct pmx_mode auto_net_smii_mode; +extern struct pmx_mode auto_net_mii_mode; +extern struct pmx_mode auto_exp_mode; +extern struct pmx_mode small_printers_mode; + +/* pad mux devices */ +extern struct pmx_dev pmx_clcd; +extern struct pmx_dev pmx_emi; +extern struct pmx_dev pmx_fsmc; +extern struct pmx_dev pmx_spp; +extern struct pmx_dev pmx_sdio; +extern struct pmx_dev pmx_i2s; +extern struct pmx_dev pmx_uart1; +extern struct pmx_dev pmx_uart1_modem; +extern struct pmx_dev pmx_uart2; +extern struct pmx_dev pmx_touchscreen; +extern struct pmx_dev pmx_can; +extern struct pmx_dev pmx_sdio_led; +extern struct pmx_dev pmx_pwm0; +extern struct pmx_dev pmx_pwm1; +extern struct pmx_dev pmx_pwm2; +extern struct pmx_dev pmx_pwm3; +extern struct pmx_dev pmx_ssp1; +extern struct pmx_dev pmx_ssp2; +extern struct pmx_dev pmx_mii1; +extern struct pmx_dev pmx_smii0; +extern struct pmx_dev pmx_smii1; +extern struct pmx_dev pmx_i2c1; + +void spear320_pmx_init(void); + +/* Add spear320 machine function declarations here */ +void __init spear320_init(void); + +#endif /* CONFIG_MACH_SPEAR320 */ + +#endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h new file mode 100644 index 000000000000..451b2081bfc9 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/gpio.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/gpio.h + * + * GPIO macros for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_GPIO_H +#define __MACH_GPIO_H + +#include <plat/gpio.h> + +#endif /* __MACH_GPIO_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h new file mode 100644 index 000000000000..4a86e6a3c444 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/hardware.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-spear3xx/include/mach/hardware.h + * + * Hardware definitions for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +/* Vitual to physical translation of statically mapped space */ +#define IO_ADDRESS(x) (x | 0xF0000000) + +#endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/io.h b/arch/arm/mach-spear3xx/include/mach/io.h new file mode 100644 index 000000000000..30cff8a1f6b5 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/io.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/io.h + * + * IO definitions for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_IO_H +#define __MACH_IO_H + +#include <plat/io.h> + +#endif /* __MACH_IO_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h new file mode 100644 index 000000000000..7f940b818473 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -0,0 +1,152 @@ +/* + * arch/arm/mach-spear3xx/include/mach/irqs.h + * + * IRQ helper macros for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +/* SPEAr3xx IRQ definitions */ +#define IRQ_HW_ACCEL_MOD_0 0 +#define IRQ_INTRCOMM_RAS_ARM 1 +#define IRQ_CPU_GPT1_1 2 +#define IRQ_CPU_GPT1_2 3 +#define IRQ_BASIC_GPT1_1 4 +#define IRQ_BASIC_GPT1_2 5 +#define IRQ_BASIC_GPT2_1 6 +#define IRQ_BASIC_GPT2_2 7 +#define IRQ_BASIC_DMA 8 +#define IRQ_BASIC_SMI 9 +#define IRQ_BASIC_RTC 10 +#define IRQ_BASIC_GPIO 11 +#define IRQ_BASIC_WDT 12 +#define IRQ_DDR_CONTROLLER 13 +#define IRQ_SYS_ERROR 14 +#define IRQ_WAKEUP_RCV 15 +#define IRQ_JPEG 16 +#define IRQ_IRDA 17 +#define IRQ_ADC 18 +#define IRQ_UART 19 +#define IRQ_SSP 20 +#define IRQ_I2C 21 +#define IRQ_MAC_1 22 +#define IRQ_MAC_2 23 +#define IRQ_USB_DEV 24 +#define IRQ_USB_H_OHCI_0 25 +#define IRQ_USB_H_EHCI_0 26 +#define IRQ_USB_H_EHCI_1 IRQ_USB_H_EHCI_0 +#define IRQ_USB_H_OHCI_1 27 +#define IRQ_GEN_RAS_1 28 +#define IRQ_GEN_RAS_2 29 +#define IRQ_GEN_RAS_3 30 +#define IRQ_HW_ACCEL_MOD_1 31 +#define IRQ_VIC_END 32 + +#define VIRQ_START IRQ_VIC_END + +/* SPEAr300 Virtual irq definitions */ +#ifdef CONFIG_MACH_SPEAR300 +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define VIRQ_IT_PERS_S (VIRQ_START + 0) +#define VIRQ_IT_CHANGE_S (VIRQ_START + 1) +#define VIRQ_I2S (VIRQ_START + 2) +#define VIRQ_TDM (VIRQ_START + 3) +#define VIRQ_CAMERA_L (VIRQ_START + 4) +#define VIRQ_CAMERA_F (VIRQ_START + 5) +#define VIRQ_CAMERA_V (VIRQ_START + 6) +#define VIRQ_KEYBOARD (VIRQ_START + 7) +#define VIRQ_GPIO1 (VIRQ_START + 8) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define IRQ_CLCD IRQ_GEN_RAS_3 + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define IRQ_SDIO IRQ_INTRCOMM_RAS_ARM + +/* GPIO pins virtual irqs */ +#define SPEAR_GPIO_INT_BASE (VIRQ_START + 9) +#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO_INT_BASE + 8) +#define SPEAR_GPIO_INT_END (SPEAR_GPIO1_INT_BASE + 8) + +/* SPEAr310 Virtual irq definitions */ +#elif defined(CONFIG_MACH_SPEAR310) +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define VIRQ_SMII0 (VIRQ_START + 0) +#define VIRQ_SMII1 (VIRQ_START + 1) +#define VIRQ_SMII2 (VIRQ_START + 2) +#define VIRQ_SMII3 (VIRQ_START + 3) +#define VIRQ_WAKEUP_SMII0 (VIRQ_START + 4) +#define VIRQ_WAKEUP_SMII1 (VIRQ_START + 5) +#define VIRQ_WAKEUP_SMII2 (VIRQ_START + 6) +#define VIRQ_WAKEUP_SMII3 (VIRQ_START + 7) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define VIRQ_UART1 (VIRQ_START + 8) +#define VIRQ_UART2 (VIRQ_START + 9) +#define VIRQ_UART3 (VIRQ_START + 10) +#define VIRQ_UART4 (VIRQ_START + 11) +#define VIRQ_UART5 (VIRQ_START + 12) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define VIRQ_EMI (VIRQ_START + 13) +#define VIRQ_PLGPIO (VIRQ_START + 14) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define VIRQ_TDM_HDLC (VIRQ_START + 15) +#define VIRQ_RS485_0 (VIRQ_START + 16) +#define VIRQ_RS485_1 (VIRQ_START + 17) + +/* GPIO pins virtual irqs */ +#define SPEAR_GPIO_INT_BASE (VIRQ_START + 18) + +/* SPEAr320 Virtual irq definitions */ +#else +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define VIRQ_EMI (VIRQ_START + 0) +#define VIRQ_CLCD (VIRQ_START + 1) +#define VIRQ_SPP (VIRQ_START + 2) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define IRQ_SDIO IRQ_GEN_RAS_2 + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define VIRQ_PLGPIO (VIRQ_START + 3) +#define VIRQ_I2S_PLAY (VIRQ_START + 4) +#define VIRQ_I2S_REC (VIRQ_START + 5) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define VIRQ_CANU (VIRQ_START + 6) +#define VIRQ_CANL (VIRQ_START + 7) +#define VIRQ_UART1 (VIRQ_START + 8) +#define VIRQ_UART2 (VIRQ_START + 9) +#define VIRQ_SSP1 (VIRQ_START + 10) +#define VIRQ_SSP2 (VIRQ_START + 11) +#define VIRQ_SMII0 (VIRQ_START + 12) +#define VIRQ_MII1_SMII1 (VIRQ_START + 13) +#define VIRQ_WAKEUP_SMII0 (VIRQ_START + 14) +#define VIRQ_WAKEUP_MII1_SMII1 (VIRQ_START + 15) +#define VIRQ_I2C (VIRQ_START + 16) + +/* GPIO pins virtual irqs */ +#define SPEAR_GPIO_INT_BASE (VIRQ_START + 17) + +#endif + +/* PLGPIO Virtual IRQs */ +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) +#define SPEAR_PLGPIO_INT_BASE (SPEAR_GPIO_INT_BASE + 8) +#define SPEAR_GPIO_INT_END (SPEAR_PLGPIO_INT_BASE + 102) +#endif + +#define VIRQ_END SPEAR_GPIO_INT_END +#define NR_IRQS VIRQ_END + +#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h new file mode 100644 index 000000000000..51735221ea19 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/memory.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/memory.h + * + * Memory map for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_MEMORY_H +#define __MACH_MEMORY_H + +#include <plat/memory.h> + +#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h new file mode 100644 index 000000000000..38d767a1aba0 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -0,0 +1,163 @@ +/* + * arch/arm/mach-spear3xx/include/mach/misc_regs.h + * + * Miscellaneous registers definitions for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_MISC_REGS_H +#define __MACH_MISC_REGS_H + +#include <mach/spear.h> + +#define MISC_BASE VA_SPEAR3XX_ICM3_MISC_REG_BASE + +#define SOC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x000)) +#define DIAG_CFG_CTR ((unsigned int *)(MISC_BASE + 0x004)) +#define PLL1_CTR ((unsigned int *)(MISC_BASE + 0x008)) +#define PLL1_FRQ ((unsigned int *)(MISC_BASE + 0x00C)) +#define PLL1_MOD ((unsigned int *)(MISC_BASE + 0x010)) +#define PLL2_CTR ((unsigned int *)(MISC_BASE + 0x014)) +/* PLL_CTR register masks */ +#define PLL_ENABLE 2 +#define PLL_MODE_SHIFT 4 +#define PLL_MODE_MASK 0x3 +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSB 2 +#define PLL_MODE_DITH_SSB 3 + +#define PLL2_FRQ ((unsigned int *)(MISC_BASE + 0x018)) +/* PLL FRQ register masks */ +#define PLL_DIV_N_SHIFT 0 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_P_MASK 0x7 +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DITH_FDBK_M_MASK 0xFFFF + +#define PLL2_MOD ((unsigned int *)(MISC_BASE + 0x01C)) +#define PLL_CLK_CFG ((unsigned int *)(MISC_BASE + 0x020)) +#define CORE_CLK_CFG ((unsigned int *)(MISC_BASE + 0x024)) +/* CORE CLK CFG register masks */ +#define PLL_HCLK_RATIO_SHIFT 10 +#define PLL_HCLK_RATIO_MASK 0x3 +#define HCLK_PCLK_RATIO_SHIFT 8 +#define HCLK_PCLK_RATIO_MASK 0x3 + +#define PERIP_CLK_CFG ((unsigned int *)(MISC_BASE + 0x028)) +/* PERIP_CLK_CFG register masks */ +#define UART_CLK_SHIFT 4 +#define UART_CLK_MASK 0x1 +#define FIRDA_CLK_SHIFT 5 +#define FIRDA_CLK_MASK 0x3 +#define GPT0_CLK_SHIFT 8 +#define GPT1_CLK_SHIFT 11 +#define GPT2_CLK_SHIFT 12 +#define GPT_CLK_MASK 0x1 +#define AUX_CLK_PLL3_MASK 0 +#define AUX_CLK_PLL1_MASK 1 + +#define PERIP1_CLK_ENB ((unsigned int *)(MISC_BASE + 0x02C)) +/* PERIP1_CLK_ENB register masks */ +#define UART_CLK_ENB 3 +#define SSP_CLK_ENB 5 +#define I2C_CLK_ENB 7 +#define JPEG_CLK_ENB 8 +#define FIRDA_CLK_ENB 10 +#define GPT1_CLK_ENB 11 +#define GPT2_CLK_ENB 12 +#define ADC_CLK_ENB 15 +#define RTC_CLK_ENB 17 +#define GPIO_CLK_ENB 18 +#define DMA_CLK_ENB 19 +#define SMI_CLK_ENB 21 +#define GMAC_CLK_ENB 23 +#define USBD_CLK_ENB 24 +#define USBH_CLK_ENB 25 +#define C3_CLK_ENB 31 + +#define SOC_CORE_ID ((unsigned int *)(MISC_BASE + 0x030)) +#define RAS_CLK_ENB ((unsigned int *)(MISC_BASE + 0x034)) +#define PERIP1_SOF_RST ((unsigned int *)(MISC_BASE + 0x038)) +/* PERIP1_SOF_RST register masks */ +#define JPEG_SOF_RST 8 + +#define SOC_USER_ID ((unsigned int *)(MISC_BASE + 0x03C)) +#define RAS_SOF_RST ((unsigned int *)(MISC_BASE + 0x040)) +#define PRSC1_CLK_CFG ((unsigned int *)(MISC_BASE + 0x044)) +#define PRSC2_CLK_CFG ((unsigned int *)(MISC_BASE + 0x048)) +#define PRSC3_CLK_CFG ((unsigned int *)(MISC_BASE + 0x04C)) +/* gpt synthesizer register masks */ +#define GPT_MSCALE_SHIFT 0 +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +#define AMEM_CLK_CFG ((unsigned int *)(MISC_BASE + 0x050)) +#define EXPI_CLK_CFG ((unsigned int *)(MISC_BASE + 0x054)) +#define CLCD_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x05C)) +#define FIRDA_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x060)) +#define UART_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x064)) +#define GMAC_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x068)) +#define RAS1_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x06C)) +#define RAS2_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x070)) +#define RAS3_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x074)) +#define RAS4_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x078)) +/* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF + +#define ICM1_ARB_CFG ((unsigned int *)(MISC_BASE + 0x07C)) +#define ICM2_ARB_CFG ((unsigned int *)(MISC_BASE + 0x080)) +#define ICM3_ARB_CFG ((unsigned int *)(MISC_BASE + 0x084)) +#define ICM4_ARB_CFG ((unsigned int *)(MISC_BASE + 0x088)) +#define ICM5_ARB_CFG ((unsigned int *)(MISC_BASE + 0x08C)) +#define ICM6_ARB_CFG ((unsigned int *)(MISC_BASE + 0x090)) +#define ICM7_ARB_CFG ((unsigned int *)(MISC_BASE + 0x094)) +#define ICM8_ARB_CFG ((unsigned int *)(MISC_BASE + 0x098)) +#define ICM9_ARB_CFG ((unsigned int *)(MISC_BASE + 0x09C)) +#define DMA_CHN_CFG ((unsigned int *)(MISC_BASE + 0x0A0)) +#define USB2_PHY_CFG ((unsigned int *)(MISC_BASE + 0x0A4)) +#define GMAC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0A8)) +#define EXPI_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0AC)) +#define PRC1_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C0)) +#define PRC2_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C4)) +#define PRC3_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C8)) +#define PRC4_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0CC)) +#define PRC1_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D0)) +#define PRC2_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D4)) +#define PRC3_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D8)) +#define PRC4_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0DC)) +#define PWRDOWN_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0E0)) +#define COMPSSTL_1V8_CFG ((unsigned int *)(MISC_BASE + 0x0E4)) +#define COMPSSTL_2V5_CFG ((unsigned int *)(MISC_BASE + 0x0E8)) +#define COMPCOR_3V3_CFG ((unsigned int *)(MISC_BASE + 0x0EC)) +#define SSTLPAD_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F0)) +#define BIST1_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F4)) +#define BIST2_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F8)) +#define BIST3_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0FC)) +#define BIST4_CFG_CTR ((unsigned int *)(MISC_BASE + 0x100)) +#define BIST5_CFG_CTR ((unsigned int *)(MISC_BASE + 0x104)) +#define BIST1_STS_RES ((unsigned int *)(MISC_BASE + 0x108)) +#define BIST2_STS_RES ((unsigned int *)(MISC_BASE + 0x10C)) +#define BIST3_STS_RES ((unsigned int *)(MISC_BASE + 0x110)) +#define BIST4_STS_RES ((unsigned int *)(MISC_BASE + 0x114)) +#define BIST5_STS_RES ((unsigned int *)(MISC_BASE + 0x118)) +#define SYSERR_CFG_CTR ((unsigned int *)(MISC_BASE + 0x11C)) + +#endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h new file mode 100644 index 000000000000..dcca8568a486 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -0,0 +1,144 @@ +/* + * arch/arm/mach-spear3xx/include/mach/spear.h + * + * SPEAr3xx Machine family specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SPEAR3XX_H +#define __MACH_SPEAR3XX_H + +#include <mach/hardware.h> +#include <mach/spear300.h> +#include <mach/spear310.h> +#include <mach/spear320.h> + +#define SPEAR3XX_ML_SDRAM_BASE 0x00000000 +#define SPEAR3XX_ML_SDRAM_SIZE 0x40000000 + +#define SPEAR3XX_ICM9_BASE 0xC0000000 +#define SPEAR3XX_ICM9_SIZE 0x10000000 + +/* ICM1 - Low speed connection */ +#define SPEAR3XX_ICM1_2_BASE 0xD0000000 +#define SPEAR3XX_ICM1_2_SIZE 0x10000000 + +#define SPEAR3XX_ICM1_UART_BASE 0xD0000000 +#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE) +#define SPEAR3XX_ICM1_UART_SIZE 0x00080000 + +#define SPEAR3XX_ICM1_ADC_BASE 0xD0080000 +#define SPEAR3XX_ICM1_ADC_SIZE 0x00080000 + +#define SPEAR3XX_ICM1_SSP_BASE 0xD0100000 +#define SPEAR3XX_ICM1_SSP_SIZE 0x00080000 + +#define SPEAR3XX_ICM1_I2C_BASE 0xD0180000 +#define SPEAR3XX_ICM1_I2C_SIZE 0x00080000 + +#define SPEAR3XX_ICM1_JPEG_BASE 0xD0800000 +#define SPEAR3XX_ICM1_JPEG_SIZE 0x00800000 + +#define SPEAR3XX_ICM1_IRDA_BASE 0xD1000000 +#define SPEAR3XX_ICM1_IRDA_SIZE 0x00080000 + +#define SPEAR3XX_ICM1_SRAM_BASE 0xD2800000 +#define SPEAR3XX_ICM1_SRAM_SIZE 0x05800000 + +/* ICM2 - Application Subsystem */ +#define SPEAR3XX_ICM2_HWACCEL0_BASE 0xD8800000 +#define SPEAR3XX_ICM2_HWACCEL0_SIZE 0x00800000 + +#define SPEAR3XX_ICM2_HWACCEL1_BASE 0xD9000000 +#define SPEAR3XX_ICM2_HWACCEL1_SIZE 0x00800000 + +/* ICM4 - High Speed Connection */ +#define SPEAR3XX_ICM4_BASE 0xE0000000 +#define SPEAR3XX_ICM4_SIZE 0x08000000 + +#define SPEAR3XX_ICM4_MII_BASE 0xE0800000 +#define SPEAR3XX_ICM4_MII_SIZE 0x00800000 + +#define SPEAR3XX_ICM4_USBD_FIFO_BASE 0xE1000000 +#define SPEAR3XX_ICM4_USBD_FIFO_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USBD_CSR_BASE 0xE1100000 +#define SPEAR3XX_ICM4_USBD_CSR_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USBD_PLDT_BASE 0xE1200000 +#define SPEAR3XX_ICM4_USBD_PLDT_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE 0xE1800000 +#define SPEAR3XX_ICM4_USB_EHCI0_1_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USB_OHCI0_BASE 0xE1900000 +#define SPEAR3XX_ICM4_USB_OHCI0_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USB_OHCI1_BASE 0xE2100000 +#define SPEAR3XX_ICM4_USB_OHCI1_SIZE 0x00100000 + +#define SPEAR3XX_ICM4_USB_ARB_BASE 0xE2800000 +#define SPEAR3XX_ICM4_USB_ARB_SIZE 0x00010000 + +/* ML1 - Multi Layer CPU Subsystem */ +#define SPEAR3XX_ICM3_ML1_2_BASE 0xF0000000 +#define SPEAR3XX_ICM3_ML1_2_SIZE 0x0F000000 + +#define SPEAR3XX_ML1_TMR_BASE 0xF0000000 +#define SPEAR3XX_ML1_TMR_SIZE 0x00100000 + +#define SPEAR3XX_ML1_VIC_BASE 0xF1100000 +#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE) +#define SPEAR3XX_ML1_VIC_SIZE 0x00100000 + +/* ICM3 - Basic Subsystem */ +#define SPEAR3XX_ICM3_SMEM_BASE 0xF8000000 +#define SPEAR3XX_ICM3_SMEM_SIZE 0x04000000 + +#define SPEAR3XX_ICM3_SMI_CTRL_BASE 0xFC000000 +#define SPEAR3XX_ICM3_SMI_CTRL_SIZE 0x00200000 + +#define SPEAR3XX_ICM3_DMA_BASE 0xFC400000 +#define SPEAR3XX_ICM3_DMA_SIZE 0x00200000 + +#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE 0xFC600000 +#define SPEAR3XX_ICM3_SDRAM_CTRL_SIZE 0x00200000 + +#define SPEAR3XX_ICM3_TMR0_BASE 0xFC800000 +#define SPEAR3XX_ICM3_TMR0_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_WDT_BASE 0xFC880000 +#define SPEAR3XX_ICM3_WDT_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_RTC_BASE 0xFC900000 +#define SPEAR3XX_ICM3_RTC_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_GPIO_BASE 0xFC980000 +#define SPEAR3XX_ICM3_GPIO_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_SYS_CTRL_BASE 0xFCA00000 +#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE) +#define SPEAR3XX_ICM3_SYS_CTRL_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_MISC_REG_BASE 0xFCA80000 +#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE) +#define SPEAR3XX_ICM3_MISC_REG_SIZE 0x00080000 + +#define SPEAR3XX_ICM3_TMR1_BASE 0xFCB00000 +#define SPEAR3XX_ICM3_TMR1_SIZE 0x00080000 + +/* Debug uart for linux, will be used for debug and uncompress messages */ +#define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE +#define VA_SPEAR_DBG_UART_BASE VA_SPEAR3XX_ICM1_UART_BASE + +/* Sysctl base for spear platform */ +#define SPEAR_SYS_CTRL_BASE SPEAR3XX_ICM3_SYS_CTRL_BASE +#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR3XX_ICM3_SYS_CTRL_BASE + +#endif /* __MACH_SPEAR3XX_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h new file mode 100644 index 000000000000..ccaa76522ee2 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/spear300.h @@ -0,0 +1,83 @@ +/* + * arch/arm/mach-spear3xx/include/mach/spear300.h + * + * SPEAr300 Machine specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifdef CONFIG_MACH_SPEAR300 + +#ifndef __MACH_SPEAR300_H +#define __MACH_SPEAR300_H + +/* Base address of various IPs */ +#define SPEAR300_TELECOM_BASE 0x50000000 +#define SPEAR300_TELECOM_SIZE 0x10000000 + +/* Interrupt registers offsets and masks */ +#define SPEAR300_TELECOM_REG_SIZE 0x00010000 +#define INT_ENB_MASK_REG 0x54 +#define INT_STS_MASK_REG 0x58 +#define IT_PERS_S_IRQ_MASK (1 << 0) +#define IT_CHANGE_S_IRQ_MASK (1 << 1) +#define I2S_IRQ_MASK (1 << 2) +#define TDM_IRQ_MASK (1 << 3) +#define CAMERA_L_IRQ_MASK (1 << 4) +#define CAMERA_F_IRQ_MASK (1 << 5) +#define CAMERA_V_IRQ_MASK (1 << 6) +#define KEYBOARD_IRQ_MASK (1 << 7) +#define GPIO1_IRQ_MASK (1 << 8) + +#define SHIRQ_RAS1_MASK 0x1FF + +#define SPEAR300_CLCD_BASE 0x60000000 +#define SPEAR300_CLCD_SIZE 0x10000000 + +#define SPEAR300_SDIO_BASE 0x70000000 +#define SPEAR300_SDIO_SIZE 0x10000000 + +#define SPEAR300_NAND_0_BASE 0x80000000 +#define SPEAR300_NAND_0_SIZE 0x04000000 + +#define SPEAR300_NAND_1_BASE 0x84000000 +#define SPEAR300_NAND_1_SIZE 0x04000000 + +#define SPEAR300_NAND_2_BASE 0x88000000 +#define SPEAR300_NAND_2_SIZE 0x04000000 + +#define SPEAR300_NAND_3_BASE 0x8c000000 +#define SPEAR300_NAND_3_SIZE 0x04000000 + +#define SPEAR300_NOR_0_BASE 0x90000000 +#define SPEAR300_NOR_0_SIZE 0x01000000 + +#define SPEAR300_NOR_1_BASE 0x91000000 +#define SPEAR300_NOR_1_SIZE 0x01000000 + +#define SPEAR300_NOR_2_BASE 0x92000000 +#define SPEAR300_NOR_2_SIZE 0x01000000 + +#define SPEAR300_NOR_3_BASE 0x93000000 +#define SPEAR300_NOR_3_SIZE 0x01000000 + +#define SPEAR300_FSMC_BASE 0x94000000 +#define SPEAR300_FSMC_SIZE 0x05000000 + +#define SPEAR300_SOC_CONFIG_BASE 0x99000000 +#define SPEAR300_SOC_CONFIG_SIZE 0x00000008 + +#define SPEAR300_KEYBOARD_BASE 0xA0000000 +#define SPEAR300_KEYBOARD_SIZE 0x09000000 + +#define SPEAR300_GPIO_BASE 0xA9000000 +#define SPEAR300_GPIO_SIZE 0x07000000 + +#endif /* __MACH_SPEAR300_H */ + +#endif /* CONFIG_MACH_SPEAR300 */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h new file mode 100644 index 000000000000..b27bb8af3309 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/spear310.h @@ -0,0 +1,70 @@ +/* + * arch/arm/mach-spear3xx/include/mach/spear310.h + * + * SPEAr310 Machine specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifdef CONFIG_MACH_SPEAR310 + +#ifndef __MACH_SPEAR310_H +#define __MACH_SPEAR310_H + +#define SPEAR310_NAND_BASE 0x40000000 +#define SPEAR310_NAND_SIZE 0x04000000 + +#define SPEAR310_FSMC_BASE 0x44000000 +#define SPEAR310_FSMC_SIZE 0x01000000 + +#define SPEAR310_UART1_BASE 0xB2000000 +#define SPEAR310_UART2_BASE 0xB2080000 +#define SPEAR310_UART3_BASE 0xB2100000 +#define SPEAR310_UART4_BASE 0xB2180000 +#define SPEAR310_UART5_BASE 0xB2200000 +#define SPEAR310_UART_SIZE 0x00080000 + +#define SPEAR310_HDLC_BASE 0xB2800000 +#define SPEAR310_HDLC_SIZE 0x00800000 + +#define SPEAR310_RS485_0_BASE 0xB3000000 +#define SPEAR310_RS485_0_SIZE 0x00800000 + +#define SPEAR310_RS485_1_BASE 0xB3800000 +#define SPEAR310_RS485_1_SIZE 0x00800000 + +#define SPEAR310_SOC_CONFIG_BASE 0xB4000000 +#define SPEAR310_SOC_CONFIG_SIZE 0x00000070 +/* Interrupt registers offsets and masks */ +#define INT_STS_MASK_REG 0x04 +#define SMII0_IRQ_MASK (1 << 0) +#define SMII1_IRQ_MASK (1 << 1) +#define SMII2_IRQ_MASK (1 << 2) +#define SMII3_IRQ_MASK (1 << 3) +#define WAKEUP_SMII0_IRQ_MASK (1 << 4) +#define WAKEUP_SMII1_IRQ_MASK (1 << 5) +#define WAKEUP_SMII2_IRQ_MASK (1 << 6) +#define WAKEUP_SMII3_IRQ_MASK (1 << 7) +#define UART1_IRQ_MASK (1 << 8) +#define UART2_IRQ_MASK (1 << 9) +#define UART3_IRQ_MASK (1 << 10) +#define UART4_IRQ_MASK (1 << 11) +#define UART5_IRQ_MASK (1 << 12) +#define EMI_IRQ_MASK (1 << 13) +#define TDM_HDLC_IRQ_MASK (1 << 14) +#define RS485_0_IRQ_MASK (1 << 15) +#define RS485_1_IRQ_MASK (1 << 16) + +#define SHIRQ_RAS1_MASK 0x000FF +#define SHIRQ_RAS2_MASK 0x01F00 +#define SHIRQ_RAS3_MASK 0x02000 +#define SHIRQ_INTRCOMM_RAS_MASK 0x1C000 + +#endif /* __MACH_SPEAR310_H */ + +#endif /* CONFIG_MACH_SPEAR310 */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h new file mode 100644 index 000000000000..cacf17a958cd --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/spear320.h @@ -0,0 +1,96 @@ +/* + * arch/arm/mach-spear3xx/include/mach/spear320.h + * + * SPEAr320 Machine specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifdef CONFIG_MACH_SPEAR320 + +#ifndef __MACH_SPEAR320_H +#define __MACH_SPEAR320_H + +#define SPEAR320_EMI_CTRL_BASE 0x40000000 +#define SPEAR320_EMI_CTRL_SIZE 0x08000000 + +#define SPEAR320_FSMC_BASE 0x4C000000 +#define SPEAR320_FSMC_SIZE 0x01000000 + +#define SPEAR320_I2S_BASE 0x60000000 +#define SPEAR320_I2S_SIZE 0x10000000 + +#define SPEAR320_SDIO_BASE 0x70000000 +#define SPEAR320_SDIO_SIZE 0x10000000 + +#define SPEAR320_CLCD_BASE 0x90000000 +#define SPEAR320_CLCD_SIZE 0x10000000 + +#define SPEAR320_PAR_PORT_BASE 0xA0000000 +#define SPEAR320_PAR_PORT_SIZE 0x01000000 + +#define SPEAR320_CAN0_BASE 0xA1000000 +#define SPEAR320_CAN0_SIZE 0x01000000 + +#define SPEAR320_CAN1_BASE 0xA2000000 +#define SPEAR320_CAN1_SIZE 0x01000000 + +#define SPEAR320_UART1_BASE 0xA3000000 +#define SPEAR320_UART2_BASE 0xA4000000 +#define SPEAR320_UART_SIZE 0x01000000 + +#define SPEAR320_SSP0_BASE 0xA5000000 +#define SPEAR320_SSP0_SIZE 0x01000000 + +#define SPEAR320_SSP1_BASE 0xA6000000 +#define SPEAR320_SSP1_SIZE 0x01000000 + +#define SPEAR320_I2C_BASE 0xA7000000 +#define SPEAR320_I2C_SIZE 0x01000000 + +#define SPEAR320_PWM_BASE 0xA8000000 +#define SPEAR320_PWM_SIZE 0x01000000 + +#define SPEAR320_SMII0_BASE 0xAA000000 +#define SPEAR320_SMII0_SIZE 0x01000000 + +#define SPEAR320_SMII1_BASE 0xAB000000 +#define SPEAR320_SMII1_SIZE 0x01000000 + +#define SPEAR320_SOC_CONFIG_BASE 0xB4000000 +#define SPEAR320_SOC_CONFIG_SIZE 0x00000070 +/* Interrupt registers offsets and masks */ +#define INT_STS_MASK_REG 0x04 +#define INT_CLR_MASK_REG 0x04 +#define INT_ENB_MASK_REG 0x08 +#define GPIO_IRQ_MASK (1 << 0) +#define I2S_PLAY_IRQ_MASK (1 << 1) +#define I2S_REC_IRQ_MASK (1 << 2) +#define EMI_IRQ_MASK (1 << 7) +#define CLCD_IRQ_MASK (1 << 8) +#define SPP_IRQ_MASK (1 << 9) +#define SDIO_IRQ_MASK (1 << 10) +#define CAN_U_IRQ_MASK (1 << 11) +#define CAN_L_IRQ_MASK (1 << 12) +#define UART1_IRQ_MASK (1 << 13) +#define UART2_IRQ_MASK (1 << 14) +#define SSP1_IRQ_MASK (1 << 15) +#define SSP2_IRQ_MASK (1 << 16) +#define SMII0_IRQ_MASK (1 << 17) +#define MII1_SMII1_IRQ_MASK (1 << 18) +#define WAKEUP_SMII0_IRQ_MASK (1 << 19) +#define WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) +#define I2C1_IRQ_MASK (1 << 21) + +#define SHIRQ_RAS1_MASK 0x000380 +#define SHIRQ_RAS3_MASK 0x000007 +#define SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 + +#endif /* __MACH_SPEAR320_H */ + +#endif /* CONFIG_MACH_SPEAR320 */ diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h new file mode 100644 index 000000000000..92cee6335c90 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/system.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/system.h + * + * SPEAr3xx Machine family specific architecture functions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +#include <plat/system.h> + +#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h new file mode 100644 index 000000000000..a38cc9de876f --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/timex.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/timex.h + * + * SPEAr3XX machine family specific timex definitions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_TIMEX_H +#define __MACH_TIMEX_H + +#include <plat/timex.h> + +#endif /* __MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h new file mode 100644 index 000000000000..53ba8bbc0dfa --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_UNCOMPRESS_H +#define __MACH_UNCOMPRESS_H + +#include <plat/uncompress.h> + +#endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/vmalloc.h b/arch/arm/mach-spear3xx/include/mach/vmalloc.h new file mode 100644 index 000000000000..df977b3c9a63 --- /dev/null +++ b/arch/arm/mach-spear3xx/include/mach/vmalloc.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/vmalloc.h + * + * Defining Vmalloc area for SPEAr3xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_VMALLOC_H +#define __MACH_VMALLOC_H + +#include <plat/vmalloc.h> + +#endif /* __MACH_VMALLOC_H */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c new file mode 100644 index 000000000000..3560f8c1e723 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear300.c @@ -0,0 +1,468 @@ +/* + * arch/arm/mach-spear3xx/spear300.c + * + * SPEAr300 machine source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/types.h> +#include <linux/amba/pl061.h> +#include <linux/ptrace.h> +#include <asm/irq.h> +#include <mach/generic.h> +#include <mach/spear.h> +#include <plat/shirq.h> + +/* pad multiplexing support */ +/* muxing registers */ +#define PAD_MUX_CONFIG_REG 0x00 +#define MODE_CONFIG_REG 0x04 + +/* modes */ +#define NAND_MODE (1 << 0) +#define NOR_MODE (1 << 1) +#define PHOTO_FRAME_MODE (1 << 2) +#define LEND_IP_PHONE_MODE (1 << 3) +#define HEND_IP_PHONE_MODE (1 << 4) +#define LEND_WIFI_PHONE_MODE (1 << 5) +#define HEND_WIFI_PHONE_MODE (1 << 6) +#define ATA_PABX_WI2S_MODE (1 << 7) +#define ATA_PABX_I2S_MODE (1 << 8) +#define CAML_LCDW_MODE (1 << 9) +#define CAMU_LCD_MODE (1 << 10) +#define CAMU_WLCD_MODE (1 << 11) +#define CAML_LCD_MODE (1 << 12) +#define ALL_MODES 0x1FFF + +struct pmx_mode nand_mode = { + .id = NAND_MODE, + .name = "nand mode", + .mask = 0x00, +}; + +struct pmx_mode nor_mode = { + .id = NOR_MODE, + .name = "nor mode", + .mask = 0x01, +}; + +struct pmx_mode photo_frame_mode = { + .id = PHOTO_FRAME_MODE, + .name = "photo frame mode", + .mask = 0x02, +}; + +struct pmx_mode lend_ip_phone_mode = { + .id = LEND_IP_PHONE_MODE, + .name = "lend ip phone mode", + .mask = 0x03, +}; + +struct pmx_mode hend_ip_phone_mode = { + .id = HEND_IP_PHONE_MODE, + .name = "hend ip phone mode", + .mask = 0x04, +}; + +struct pmx_mode lend_wifi_phone_mode = { + .id = LEND_WIFI_PHONE_MODE, + .name = "lend wifi phone mode", + .mask = 0x05, +}; + +struct pmx_mode hend_wifi_phone_mode = { + .id = HEND_WIFI_PHONE_MODE, + .name = "hend wifi phone mode", + .mask = 0x06, +}; + +struct pmx_mode ata_pabx_wi2s_mode = { + .id = ATA_PABX_WI2S_MODE, + .name = "ata pabx wi2s mode", + .mask = 0x07, +}; + +struct pmx_mode ata_pabx_i2s_mode = { + .id = ATA_PABX_I2S_MODE, + .name = "ata pabx i2s mode", + .mask = 0x08, +}; + +struct pmx_mode caml_lcdw_mode = { + .id = CAML_LCDW_MODE, + .name = "caml lcdw mode", + .mask = 0x0C, +}; + +struct pmx_mode camu_lcd_mode = { + .id = CAMU_LCD_MODE, + .name = "camu lcd mode", + .mask = 0x0D, +}; + +struct pmx_mode camu_wlcd_mode = { + .id = CAMU_WLCD_MODE, + .name = "camu wlcd mode", + .mask = 0x0E, +}; + +struct pmx_mode caml_lcd_mode = { + .id = CAML_LCD_MODE, + .name = "caml lcd mode", + .mask = 0x0F, +}; + +/* devices */ +struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = { + { + .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | + ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_fsmc_2_chips = { + .name = "fsmc_2_chips", + .modes = pmx_fsmc_2_chips_modes, + .mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = { + { + .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | + ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, + .mask = PMX_FIRDA_MASK | PMX_UART0_MASK, + }, +}; + +struct pmx_dev pmx_fsmc_4_chips = { + .name = "fsmc_4_chips", + .modes = pmx_fsmc_4_chips_modes, + .mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_keyboard_modes[] = { + { + .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | + LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | + CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE | + CAML_LCD_MODE, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_keyboard = { + .name = "keyboard", + .modes = pmx_keyboard_modes, + .mode_count = ARRAY_SIZE(pmx_keyboard_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_clcd_modes[] = { + { + .ids = PHOTO_FRAME_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK , + }, { + .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE | + CAMU_LCD_MODE | CAML_LCD_MODE, + .mask = PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_clcd = { + .name = "clcd", + .modes = pmx_clcd_modes, + .mode_count = ARRAY_SIZE(pmx_clcd_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_gpio_modes[] = { + { + .ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE, + .mask = PMX_MII_MASK, + }, { + .ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE, + .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, + }, { + .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE, + .mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK, + }, { + .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE, + .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK, + }, { + .ids = ATA_PABX_WI2S_MODE, + .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK + | PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_telecom_gpio = { + .name = "telecom_gpio", + .modes = pmx_telecom_gpio_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_tdm_modes[] = { + { + .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | + HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE + | HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE + | ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE + | CAMU_WLCD_MODE | CAML_LCD_MODE, + .mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_telecom_tdm = { + .name = "telecom_tdm", + .modes = pmx_telecom_tdm_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = { + { + .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | + LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE + | ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE | + CAML_LCDW_MODE | CAML_LCD_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_telecom_spi_cs_i2c_clk = { + .name = "telecom_spi_cs_i2c_clk", + .modes = pmx_telecom_spi_cs_i2c_clk_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_camera_modes[] = { + { + .ids = CAML_LCDW_MODE | CAML_LCD_MODE, + .mask = PMX_MII_MASK, + }, { + .ids = CAMU_LCD_MODE | CAMU_WLCD_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_telecom_camera = { + .name = "telecom_camera", + .modes = pmx_telecom_camera_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_camera_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_dac_modes[] = { + { + .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE + | CAMU_WLCD_MODE | CAML_LCD_MODE, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_telecom_dac = { + .name = "telecom_dac", + .modes = pmx_telecom_dac_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_dac_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_i2s_modes[] = { + { + .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE + | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | + ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE + | CAMU_WLCD_MODE | CAML_LCD_MODE, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_telecom_i2s = { + .name = "telecom_i2s", + .modes = pmx_telecom_i2s_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = { + { + .ids = NAND_MODE | NOR_MODE, + .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | + PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_telecom_boot_pins = { + .name = "telecom_boot_pins", + .modes = pmx_telecom_boot_pins_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = { + { + .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | + HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | + HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | + CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE | + ATA_PABX_I2S_MODE, + .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | + PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | + PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK, + }, +}; + +struct pmx_dev pmx_telecom_sdio_4bit = { + .name = "telecom_sdio_4bit", + .modes = pmx_telecom_sdio_4bit_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = { + { + .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | + HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | + HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | + CAMU_WLCD_MODE | CAML_LCD_MODE, + .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | + PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | + PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_telecom_sdio_8bit = { + .name = "telecom_sdio_8bit", + .modes = pmx_telecom_sdio_8bit_modes, + .mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_gpio1_modes[] = { + { + .ids = PHOTO_FRAME_MODE, + .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | + PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_gpio1 = { + .name = "arm gpio1", + .modes = pmx_gpio1_modes, + .mode_count = ARRAY_SIZE(pmx_gpio1_modes), + .enb_on_reset = 1, +}; + +/* pmx driver structure */ +struct pmx_driver pmx_driver = { + .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f}, + .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, +}; + +/* Add spear300 specific devices here */ +/* arm gpio1 device registeration */ +static struct pl061_platform_data gpio1_plat_data = { + .gpio_base = 8, + .irq_base = SPEAR_GPIO1_INT_BASE, +}; + +struct amba_device gpio1_device = { + .dev = { + .init_name = "gpio1", + .platform_data = &gpio1_plat_data, + }, + .res = { + .start = SPEAR300_GPIO_BASE, + .end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {VIRQ_GPIO1, NO_IRQ}, +}; + +/* spear3xx shared irq */ +struct shirq_dev_config shirq_ras1_config[] = { + { + .virq = VIRQ_IT_PERS_S, + .enb_mask = IT_PERS_S_IRQ_MASK, + .status_mask = IT_PERS_S_IRQ_MASK, + }, { + .virq = VIRQ_IT_CHANGE_S, + .enb_mask = IT_CHANGE_S_IRQ_MASK, + .status_mask = IT_CHANGE_S_IRQ_MASK, + }, { + .virq = VIRQ_I2S, + .enb_mask = I2S_IRQ_MASK, + .status_mask = I2S_IRQ_MASK, + }, { + .virq = VIRQ_TDM, + .enb_mask = TDM_IRQ_MASK, + .status_mask = TDM_IRQ_MASK, + }, { + .virq = VIRQ_CAMERA_L, + .enb_mask = CAMERA_L_IRQ_MASK, + .status_mask = CAMERA_L_IRQ_MASK, + }, { + .virq = VIRQ_CAMERA_F, + .enb_mask = CAMERA_F_IRQ_MASK, + .status_mask = CAMERA_F_IRQ_MASK, + }, { + .virq = VIRQ_CAMERA_V, + .enb_mask = CAMERA_V_IRQ_MASK, + .status_mask = CAMERA_V_IRQ_MASK, + }, { + .virq = VIRQ_KEYBOARD, + .enb_mask = KEYBOARD_IRQ_MASK, + .status_mask = KEYBOARD_IRQ_MASK, + }, { + .virq = VIRQ_GPIO1, + .enb_mask = GPIO1_IRQ_MASK, + .status_mask = GPIO1_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras1 = { + .irq = IRQ_GEN_RAS_1, + .dev_config = shirq_ras1_config, + .dev_count = ARRAY_SIZE(shirq_ras1_config), + .regs = { + .enb_reg = INT_ENB_MASK_REG, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS1_MASK, + .clear_reg = -1, + }, +}; + +/* spear300 routines */ +void __init spear300_init(void) +{ + int ret = 0; + + /* call spear3xx family common init function */ + spear3xx_init(); + + /* shared irq registeration */ + shirq_ras1.regs.base = + ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE); + if (shirq_ras1.regs.base) { + ret = spear_shirq_register(&shirq_ras1); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ\n"); + } +} + +void spear300_pmx_init(void) +{ + spear_pmx_init(&pmx_driver, SPEAR300_SOC_CONFIG_BASE, + SPEAR300_SOC_CONFIG_SIZE); +} diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c new file mode 100644 index 000000000000..bb21db152a23 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear300_evb.c @@ -0,0 +1,77 @@ +/* + * arch/arm/mach-spear3xx/spear300_evb.c + * + * SPEAr300 evaluation board source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* padmux devices to enable */ +static struct pmx_dev *pmx_devs[] = { + /* spear3xx specific devices */ + &pmx_i2c, + &pmx_ssp_cs, + &pmx_ssp, + &pmx_mii, + &pmx_uart0, + + /* spear300 specific devices */ + &pmx_fsmc_2_chips, + &pmx_clcd, + &pmx_telecom_sdio_4bit, + &pmx_gpio1, +}; + +static struct amba_device *amba_devs[] __initdata = { + /* spear3xx specific devices */ + &gpio_device, + &uart_device, + + /* spear300 specific devices */ + &gpio1_device, +}; + +static struct platform_device *plat_devs[] __initdata = { + /* spear3xx specific devices */ + + /* spear300 specific devices */ +}; + +static void __init spear300_evb_init(void) +{ + unsigned int i; + + /* call spear300 machine init function */ + spear300_init(); + + /* padmux initialization */ + pmx_driver.mode = &photo_frame_mode; + pmx_driver.devs = pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(pmx_devs); + spear300_pmx_init(); + + /* Add Platform Devices */ + platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); + + /* Add Amba Devices */ + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) + amba_device_register(amba_devs[i], &iomem_resource); +} + +MACHINE_START(SPEAR300, "ST-SPEAR300-EVB") + .boot_params = 0x00000100, + .map_io = spear3xx_map_io, + .init_irq = spear3xx_init_irq, + .timer = &spear_sys_timer, + .init_machine = spear300_evb_init, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c new file mode 100644 index 000000000000..96a1ab824bac --- /dev/null +++ b/arch/arm/mach-spear3xx/spear310.c @@ -0,0 +1,302 @@ +/* + * arch/arm/mach-spear3xx/spear310.c + * + * SPEAr310 machine source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/ptrace.h> +#include <asm/irq.h> +#include <mach/generic.h> +#include <mach/spear.h> +#include <plat/shirq.h> + +/* pad multiplexing support */ +/* muxing registers */ +#define PAD_MUX_CONFIG_REG 0x08 + +/* devices */ +struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_emi_cs_0_1_4_5 = { + .name = "emi_cs_0_1_4_5", + .modes = pmx_emi_cs_0_1_4_5_modes, + .mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_emi_cs_2_3 = { + .name = "emi_cs_2_3", + .modes = pmx_emi_cs_2_3_modes, + .mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart1_modes[] = { + { + .ids = 0x00, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_uart1 = { + .name = "uart1", + .modes = pmx_uart1_modes, + .mode_count = ARRAY_SIZE(pmx_uart1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart2_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_uart2 = { + .name = "uart2", + .modes = pmx_uart2_modes, + .mode_count = ARRAY_SIZE(pmx_uart2_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart3_4_5_modes[] = { + { + .ids = 0x00, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_uart3_4_5 = { + .name = "uart3_4_5", + .modes = pmx_uart3_4_5_modes, + .mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_fsmc_modes[] = { + { + .ids = 0x00, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_fsmc = { + .name = "fsmc", + .modes = pmx_fsmc_modes, + .mode_count = ARRAY_SIZE(pmx_fsmc_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_rs485_0_1_modes[] = { + { + .ids = 0x00, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_rs485_0_1 = { + .name = "rs485_0_1", + .modes = pmx_rs485_0_1_modes, + .mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_tdm0_modes[] = { + { + .ids = 0x00, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_tdm0 = { + .name = "tdm0", + .modes = pmx_tdm0_modes, + .mode_count = ARRAY_SIZE(pmx_tdm0_modes), + .enb_on_reset = 1, +}; + +/* pmx driver structure */ +struct pmx_driver pmx_driver = { + .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, +}; + +/* Add spear310 specific devices here */ + +/* spear3xx shared irq */ +struct shirq_dev_config shirq_ras1_config[] = { + { + .virq = VIRQ_SMII0, + .status_mask = SMII0_IRQ_MASK, + }, { + .virq = VIRQ_SMII1, + .status_mask = SMII1_IRQ_MASK, + }, { + .virq = VIRQ_SMII2, + .status_mask = SMII2_IRQ_MASK, + }, { + .virq = VIRQ_SMII3, + .status_mask = SMII3_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII0, + .status_mask = WAKEUP_SMII0_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII1, + .status_mask = WAKEUP_SMII1_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII2, + .status_mask = WAKEUP_SMII2_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII3, + .status_mask = WAKEUP_SMII3_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras1 = { + .irq = IRQ_GEN_RAS_1, + .dev_config = shirq_ras1_config, + .dev_count = ARRAY_SIZE(shirq_ras1_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS1_MASK, + .clear_reg = -1, + }, +}; + +struct shirq_dev_config shirq_ras2_config[] = { + { + .virq = VIRQ_UART1, + .status_mask = UART1_IRQ_MASK, + }, { + .virq = VIRQ_UART2, + .status_mask = UART2_IRQ_MASK, + }, { + .virq = VIRQ_UART3, + .status_mask = UART3_IRQ_MASK, + }, { + .virq = VIRQ_UART4, + .status_mask = UART4_IRQ_MASK, + }, { + .virq = VIRQ_UART5, + .status_mask = UART5_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras2 = { + .irq = IRQ_GEN_RAS_2, + .dev_config = shirq_ras2_config, + .dev_count = ARRAY_SIZE(shirq_ras2_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS2_MASK, + .clear_reg = -1, + }, +}; + +struct shirq_dev_config shirq_ras3_config[] = { + { + .virq = VIRQ_EMI, + .status_mask = EMI_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras3 = { + .irq = IRQ_GEN_RAS_3, + .dev_config = shirq_ras3_config, + .dev_count = ARRAY_SIZE(shirq_ras3_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS3_MASK, + .clear_reg = -1, + }, +}; + +struct shirq_dev_config shirq_intrcomm_ras_config[] = { + { + .virq = VIRQ_TDM_HDLC, + .status_mask = TDM_HDLC_IRQ_MASK, + }, { + .virq = VIRQ_RS485_0, + .status_mask = RS485_0_IRQ_MASK, + }, { + .virq = VIRQ_RS485_1, + .status_mask = RS485_1_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_intrcomm_ras = { + .irq = IRQ_INTRCOMM_RAS_ARM, + .dev_config = shirq_intrcomm_ras_config, + .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK, + .clear_reg = -1, + }, +}; + +/* spear310 routines */ +void __init spear310_init(void) +{ + void __iomem *base; + int ret = 0; + + /* call spear3xx family common init function */ + spear3xx_init(); + + /* shared irq registeration */ + base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE); + if (base) { + /* shirq 1 */ + shirq_ras1.regs.base = base; + ret = spear_shirq_register(&shirq_ras1); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 1\n"); + + /* shirq 2 */ + shirq_ras2.regs.base = base; + ret = spear_shirq_register(&shirq_ras2); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 2\n"); + + /* shirq 3 */ + shirq_ras3.regs.base = base; + ret = spear_shirq_register(&shirq_ras3); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 3\n"); + + /* shirq 4 */ + shirq_intrcomm_ras.regs.base = base; + ret = spear_shirq_register(&shirq_intrcomm_ras); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 4\n"); + } +} + +void spear310_pmx_init(void) +{ + spear_pmx_init(&pmx_driver, SPEAR310_SOC_CONFIG_BASE, + SPEAR310_SOC_CONFIG_SIZE); +} diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c new file mode 100644 index 000000000000..7facf6643199 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear310_evb.c @@ -0,0 +1,84 @@ +/* + * arch/arm/mach-spear3xx/spear310_evb.c + * + * SPEAr310 evaluation board source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* padmux devices to enable */ +static struct pmx_dev *pmx_devs[] = { + /* spear3xx specific devices */ + &pmx_i2c, + &pmx_ssp, + &pmx_gpio_pin0, + &pmx_gpio_pin1, + &pmx_gpio_pin2, + &pmx_gpio_pin3, + &pmx_gpio_pin4, + &pmx_gpio_pin5, + &pmx_uart0, + + /* spear310 specific devices */ + &pmx_emi_cs_0_1_4_5, + &pmx_emi_cs_2_3, + &pmx_uart1, + &pmx_uart2, + &pmx_uart3_4_5, + &pmx_fsmc, + &pmx_rs485_0_1, + &pmx_tdm0, +}; + +static struct amba_device *amba_devs[] __initdata = { + /* spear3xx specific devices */ + &gpio_device, + &uart_device, + + /* spear310 specific devices */ +}; + +static struct platform_device *plat_devs[] __initdata = { + /* spear3xx specific devices */ + + /* spear310 specific devices */ +}; + +static void __init spear310_evb_init(void) +{ + unsigned int i; + + /* call spear310 machine init function */ + spear310_init(); + + /* padmux initialization */ + pmx_driver.mode = NULL; + pmx_driver.devs = pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(pmx_devs); + spear310_pmx_init(); + + /* Add Platform Devices */ + platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); + + /* Add Amba Devices */ + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) + amba_device_register(amba_devs[i], &iomem_resource); +} + +MACHINE_START(SPEAR310, "ST-SPEAR310-EVB") + .boot_params = 0x00000100, + .map_io = spear3xx_map_io, + .init_irq = spear3xx_init_irq, + .timer = &spear_sys_timer, + .init_machine = spear310_evb_init, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c new file mode 100644 index 000000000000..6a1219549369 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear320.c @@ -0,0 +1,549 @@ +/* + * arch/arm/mach-spear3xx/spear320.c + * + * SPEAr320 machine source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/ptrace.h> +#include <asm/irq.h> +#include <mach/generic.h> +#include <mach/spear.h> +#include <plat/shirq.h> + +/* pad multiplexing support */ +/* muxing registers */ +#define PAD_MUX_CONFIG_REG 0x0C +#define MODE_CONFIG_REG 0x10 + +/* modes */ +#define AUTO_NET_SMII_MODE (1 << 0) +#define AUTO_NET_MII_MODE (1 << 1) +#define AUTO_EXP_MODE (1 << 2) +#define SMALL_PRINTERS_MODE (1 << 3) +#define ALL_MODES 0xF + +struct pmx_mode auto_net_smii_mode = { + .id = AUTO_NET_SMII_MODE, + .name = "Automation Networking SMII Mode", + .mask = 0x00, +}; + +struct pmx_mode auto_net_mii_mode = { + .id = AUTO_NET_MII_MODE, + .name = "Automation Networking MII Mode", + .mask = 0x01, +}; + +struct pmx_mode auto_exp_mode = { + .id = AUTO_EXP_MODE, + .name = "Automation Expanded Mode", + .mask = 0x02, +}; + +struct pmx_mode small_printers_mode = { + .id = SMALL_PRINTERS_MODE, + .name = "Small Printers Mode", + .mask = 0x03, +}; + +/* devices */ +struct pmx_dev_mode pmx_clcd_modes[] = { + { + .ids = AUTO_NET_SMII_MODE, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_clcd = { + .name = "clcd", + .modes = pmx_clcd_modes, + .mode_count = ARRAY_SIZE(pmx_clcd_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_emi_modes[] = { + { + .ids = AUTO_EXP_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_emi = { + .name = "emi", + .modes = pmx_emi_modes, + .mode_count = ARRAY_SIZE(pmx_emi_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_fsmc_modes[] = { + { + .ids = ALL_MODES, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_fsmc = { + .name = "fsmc", + .modes = pmx_fsmc_modes, + .mode_count = ARRAY_SIZE(pmx_fsmc_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_spp_modes[] = { + { + .ids = SMALL_PRINTERS_MODE, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_spp = { + .name = "spp", + .modes = pmx_spp_modes, + .mode_count = ARRAY_SIZE(pmx_spp_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_sdio_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | + SMALL_PRINTERS_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_sdio = { + .name = "sdio", + .modes = pmx_sdio_modes, + .mode_count = ARRAY_SIZE(pmx_sdio_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_i2s_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_i2s = { + .name = "i2s", + .modes = pmx_i2s_modes, + .mode_count = ARRAY_SIZE(pmx_i2s_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart1_modes[] = { + { + .ids = ALL_MODES, + .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK, + }, +}; + +struct pmx_dev pmx_uart1 = { + .name = "uart1", + .modes = pmx_uart1_modes, + .mode_count = ARRAY_SIZE(pmx_uart1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart1_modem_modes[] = { + { + .ids = AUTO_EXP_MODE, + .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | + PMX_SSP_CS_MASK, + }, { + .ids = SMALL_PRINTERS_MODE, + .mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK | + PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_uart1_modem = { + .name = "uart1_modem", + .modes = pmx_uart1_modem_modes, + .mode_count = ARRAY_SIZE(pmx_uart1_modem_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_uart2_modes[] = { + { + .ids = ALL_MODES, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_uart2 = { + .name = "uart2", + .modes = pmx_uart2_modes, + .mode_count = ARRAY_SIZE(pmx_uart2_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_touchscreen_modes[] = { + { + .ids = AUTO_NET_SMII_MODE, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_touchscreen = { + .name = "touchscreen", + .modes = pmx_touchscreen_modes, + .mode_count = ARRAY_SIZE(pmx_touchscreen_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_can_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE, + .mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | + PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK, + }, +}; + +struct pmx_dev pmx_can = { + .name = "can", + .modes = pmx_can_modes, + .mode_count = ARRAY_SIZE(pmx_can_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_sdio_led_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_sdio_led = { + .name = "sdio_led", + .modes = pmx_sdio_led_modes, + .mode_count = ARRAY_SIZE(pmx_sdio_led_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_pwm0_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, + .mask = PMX_UART0_MODEM_MASK, + }, { + .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_pwm0 = { + .name = "pwm0", + .modes = pmx_pwm0_modes, + .mode_count = ARRAY_SIZE(pmx_pwm0_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_pwm1_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, + .mask = PMX_UART0_MODEM_MASK, + }, { + .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_pwm1 = { + .name = "pwm1", + .modes = pmx_pwm1_modes, + .mode_count = ARRAY_SIZE(pmx_pwm1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_pwm2_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, + .mask = PMX_SSP_CS_MASK, + }, { + .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_pwm2 = { + .name = "pwm2", + .modes = pmx_pwm2_modes, + .mode_count = ARRAY_SIZE(pmx_pwm2_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_pwm3_modes[] = { + { + .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_pwm3 = { + .name = "pwm3", + .modes = pmx_pwm3_modes, + .mode_count = ARRAY_SIZE(pmx_pwm3_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_ssp1_modes[] = { + { + .ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_ssp1 = { + .name = "ssp1", + .modes = pmx_ssp1_modes, + .mode_count = ARRAY_SIZE(pmx_ssp1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_ssp2_modes[] = { + { + .ids = AUTO_NET_SMII_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_ssp2 = { + .name = "ssp2", + .modes = pmx_ssp2_modes, + .mode_count = ARRAY_SIZE(pmx_ssp2_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_mii1_modes[] = { + { + .ids = AUTO_NET_MII_MODE, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_mii1 = { + .name = "mii1", + .modes = pmx_mii1_modes, + .mode_count = ARRAY_SIZE(pmx_mii1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_smii0_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_smii0 = { + .name = "smii0", + .modes = pmx_smii0_modes, + .mode_count = ARRAY_SIZE(pmx_smii0_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_smii1_modes[] = { + { + .ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_smii1 = { + .name = "smii1", + .modes = pmx_smii1_modes, + .mode_count = ARRAY_SIZE(pmx_smii1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_i2c1_modes[] = { + { + .ids = AUTO_EXP_MODE, + .mask = 0x0, + }, +}; + +struct pmx_dev pmx_i2c1 = { + .name = "i2c1", + .modes = pmx_i2c1_modes, + .mode_count = ARRAY_SIZE(pmx_i2c1_modes), + .enb_on_reset = 1, +}; + +/* pmx driver structure */ +struct pmx_driver pmx_driver = { + .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007}, + .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, +}; + +/* Add spear320 specific devices here */ + +/* spear3xx shared irq */ +struct shirq_dev_config shirq_ras1_config[] = { + { + .virq = VIRQ_EMI, + .status_mask = EMI_IRQ_MASK, + .clear_mask = EMI_IRQ_MASK, + }, { + .virq = VIRQ_CLCD, + .status_mask = CLCD_IRQ_MASK, + .clear_mask = CLCD_IRQ_MASK, + }, { + .virq = VIRQ_SPP, + .status_mask = SPP_IRQ_MASK, + .clear_mask = SPP_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras1 = { + .irq = IRQ_GEN_RAS_1, + .dev_config = shirq_ras1_config, + .dev_count = ARRAY_SIZE(shirq_ras1_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS1_MASK, + .clear_reg = INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +struct shirq_dev_config shirq_ras3_config[] = { + { + .virq = VIRQ_PLGPIO, + .enb_mask = GPIO_IRQ_MASK, + .status_mask = GPIO_IRQ_MASK, + .clear_mask = GPIO_IRQ_MASK, + }, { + .virq = VIRQ_I2S_PLAY, + .enb_mask = I2S_PLAY_IRQ_MASK, + .status_mask = I2S_PLAY_IRQ_MASK, + .clear_mask = I2S_PLAY_IRQ_MASK, + }, { + .virq = VIRQ_I2S_REC, + .enb_mask = I2S_REC_IRQ_MASK, + .status_mask = I2S_REC_IRQ_MASK, + .clear_mask = I2S_REC_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_ras3 = { + .irq = IRQ_GEN_RAS_3, + .dev_config = shirq_ras3_config, + .dev_count = ARRAY_SIZE(shirq_ras3_config), + .regs = { + .enb_reg = INT_ENB_MASK_REG, + .reset_to_enb = 1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_RAS3_MASK, + .clear_reg = INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +struct shirq_dev_config shirq_intrcomm_ras_config[] = { + { + .virq = VIRQ_CANU, + .status_mask = CAN_U_IRQ_MASK, + .clear_mask = CAN_U_IRQ_MASK, + }, { + .virq = VIRQ_CANL, + .status_mask = CAN_L_IRQ_MASK, + .clear_mask = CAN_L_IRQ_MASK, + }, { + .virq = VIRQ_UART1, + .status_mask = UART1_IRQ_MASK, + .clear_mask = UART1_IRQ_MASK, + }, { + .virq = VIRQ_UART2, + .status_mask = UART2_IRQ_MASK, + .clear_mask = UART2_IRQ_MASK, + }, { + .virq = VIRQ_SSP1, + .status_mask = SSP1_IRQ_MASK, + .clear_mask = SSP1_IRQ_MASK, + }, { + .virq = VIRQ_SSP2, + .status_mask = SSP2_IRQ_MASK, + .clear_mask = SSP2_IRQ_MASK, + }, { + .virq = VIRQ_SMII0, + .status_mask = SMII0_IRQ_MASK, + .clear_mask = SMII0_IRQ_MASK, + }, { + .virq = VIRQ_MII1_SMII1, + .status_mask = MII1_SMII1_IRQ_MASK, + .clear_mask = MII1_SMII1_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_SMII0, + .status_mask = WAKEUP_SMII0_IRQ_MASK, + .clear_mask = WAKEUP_SMII0_IRQ_MASK, + }, { + .virq = VIRQ_WAKEUP_MII1_SMII1, + .status_mask = WAKEUP_MII1_SMII1_IRQ_MASK, + .clear_mask = WAKEUP_MII1_SMII1_IRQ_MASK, + }, { + .virq = VIRQ_I2C, + .status_mask = I2C1_IRQ_MASK, + .clear_mask = I2C1_IRQ_MASK, + }, +}; + +struct spear_shirq shirq_intrcomm_ras = { + .irq = IRQ_INTRCOMM_RAS_ARM, + .dev_config = shirq_intrcomm_ras_config, + .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config), + .regs = { + .enb_reg = -1, + .status_reg = INT_STS_MASK_REG, + .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK, + .clear_reg = INT_CLR_MASK_REG, + .reset_to_clear = 1, + }, +}; + +/* spear320 routines */ +void __init spear320_init(void) +{ + void __iomem *base; + int ret = 0; + + /* call spear3xx family common init function */ + spear3xx_init(); + + /* shared irq registeration */ + base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE); + if (base) { + /* shirq 1 */ + shirq_ras1.regs.base = base; + ret = spear_shirq_register(&shirq_ras1); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 1\n"); + + /* shirq 3 */ + shirq_ras3.regs.base = base; + ret = spear_shirq_register(&shirq_ras3); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 3\n"); + + /* shirq 4 */ + shirq_intrcomm_ras.regs.base = base; + ret = spear_shirq_register(&shirq_intrcomm_ras); + if (ret) + printk(KERN_ERR "Error registering Shared IRQ 4\n"); + } +} + +void spear320_pmx_init(void) +{ + spear_pmx_init(&pmx_driver, SPEAR320_SOC_CONFIG_BASE, + SPEAR320_SOC_CONFIG_SIZE); +} diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c new file mode 100644 index 000000000000..62ac685a4135 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear320_evb.c @@ -0,0 +1,81 @@ +/* + * arch/arm/mach-spear3xx/spear320_evb.c + * + * SPEAr320 evaluation board source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* padmux devices to enable */ +static struct pmx_dev *pmx_devs[] = { + /* spear3xx specific devices */ + &pmx_i2c, + &pmx_ssp, + &pmx_mii, + &pmx_uart0, + + /* spear320 specific devices */ + &pmx_fsmc, + &pmx_sdio, + &pmx_i2s, + &pmx_uart1, + &pmx_uart2, + &pmx_can, + &pmx_pwm0, + &pmx_pwm1, + &pmx_pwm2, + &pmx_mii1, +}; + +static struct amba_device *amba_devs[] __initdata = { + /* spear3xx specific devices */ + &gpio_device, + &uart_device, + + /* spear320 specific devices */ +}; + +static struct platform_device *plat_devs[] __initdata = { + /* spear3xx specific devices */ + + /* spear320 specific devices */ +}; + +static void __init spear320_evb_init(void) +{ + unsigned int i; + + /* call spear320 machine init function */ + spear320_init(); + + /* padmux initialization */ + pmx_driver.mode = &auto_net_mii_mode; + pmx_driver.devs = pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(pmx_devs); + spear320_pmx_init(); + + /* Add Platform Devices */ + platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); + + /* Add Amba Devices */ + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) + amba_device_register(amba_devs[i], &iomem_resource); +} + +MACHINE_START(SPEAR320, "ST-SPEAR320-EVB") + .boot_params = 0x00000100, + .map_io = spear3xx_map_io, + .init_irq = spear3xx_init_irq, + .timer = &spear_sys_timer, + .init_machine = spear320_evb_init, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c new file mode 100644 index 000000000000..e87313aeae20 --- /dev/null +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -0,0 +1,548 @@ +/* + * arch/arm/mach-spear3xx/spear3xx.c + * + * SPEAr3XX machines common source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/types.h> +#include <linux/amba/pl061.h> +#include <linux/ptrace.h> +#include <linux/io.h> +#include <asm/hardware/vic.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* Add spear3xx machines common devices here */ +/* gpio device registeration */ +static struct pl061_platform_data gpio_plat_data = { + .gpio_base = 0, + .irq_base = SPEAR_GPIO_INT_BASE, +}; + +struct amba_device gpio_device = { + .dev = { + .init_name = "gpio", + .platform_data = &gpio_plat_data, + }, + .res = { + .start = SPEAR3XX_ICM3_GPIO_BASE, + .end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_BASIC_GPIO, NO_IRQ}, +}; + +/* uart device registeration */ +struct amba_device uart_device = { + .dev = { + .init_name = "uart", + }, + .res = { + .start = SPEAR3XX_ICM1_UART_BASE, + .end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_UART, NO_IRQ}, +}; + +/* Do spear3xx familiy common initialization part here */ +void __init spear3xx_init(void) +{ + /* nothing to do for now */ +} + +/* This will initialize vic */ +void __init spear3xx_init_irq(void) +{ + vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0); +} + +/* Following will create static virtual/physical mappings */ +struct map_desc spear3xx_io_desc[] __initdata = { + { + .virtual = VA_SPEAR3XX_ICM1_UART_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE), + .length = SPEAR3XX_ICM1_UART_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ML1_VIC_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE), + .length = SPEAR3XX_ML1_VIC_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE), + .length = SPEAR3XX_ICM3_SYS_CTRL_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE), + .length = SPEAR3XX_ICM3_MISC_REG_SIZE, + .type = MT_DEVICE + }, +}; + +/* This will create static memory mapping for selected devices */ +void __init spear3xx_map_io(void) +{ + iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); + + /* This will initialize clock framework */ + clk_init(); +} + +/* pad multiplexing support */ +/* devices */ +struct pmx_dev_mode pmx_firda_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_firda = { + .name = "firda", + .modes = pmx_firda_modes, + .mode_count = ARRAY_SIZE(pmx_firda_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_i2c_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_I2C_MASK, + }, +}; + +struct pmx_dev pmx_i2c = { + .name = "i2c", + .modes = pmx_i2c_modes, + .mode_count = ARRAY_SIZE(pmx_i2c_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_ssp_cs_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_ssp_cs = { + .name = "ssp_chip_selects", + .modes = pmx_ssp_cs_modes, + .mode_count = ARRAY_SIZE(pmx_ssp_cs_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_ssp_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_SSP_MASK, + }, +}; + +struct pmx_dev pmx_ssp = { + .name = "ssp", + .modes = pmx_ssp_modes, + .mode_count = ARRAY_SIZE(pmx_ssp_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_mii_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_mii = { + .name = "mii", + .modes = pmx_mii_modes, + .mode_count = ARRAY_SIZE(pmx_mii_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin0_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN0_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin0 = { + .name = "gpio_pin0", + .modes = pmx_gpio_pin0_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin1_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN1_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin1 = { + .name = "gpio_pin1", + .modes = pmx_gpio_pin1_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin2_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN2_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin2 = { + .name = "gpio_pin2", + .modes = pmx_gpio_pin2_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin3_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN3_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin3 = { + .name = "gpio_pin3", + .modes = pmx_gpio_pin3_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin4_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN4_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin4 = { + .name = "gpio_pin4", + .modes = pmx_gpio_pin4_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_gpio_pin5_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_GPIO_PIN5_MASK, + }, +}; + +struct pmx_dev pmx_gpio_pin5 = { + .name = "gpio_pin5", + .modes = pmx_gpio_pin5_modes, + .mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_uart0_modem_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_uart0_modem = { + .name = "uart0_modem", + .modes = pmx_uart0_modem_modes, + .mode_count = ARRAY_SIZE(pmx_uart0_modem_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_uart0_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_UART0_MASK, + }, +}; + +struct pmx_dev pmx_uart0 = { + .name = "uart0", + .modes = pmx_uart0_modes, + .mode_count = ARRAY_SIZE(pmx_uart0_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_timer_3_4_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_timer_3_4 = { + .name = "timer_3_4", + .modes = pmx_timer_3_4_modes, + .mode_count = ARRAY_SIZE(pmx_timer_3_4_modes), + .enb_on_reset = 0, +}; + +struct pmx_dev_mode pmx_timer_1_2_modes[] = { + { + .ids = 0xffffffff, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_timer_1_2 = { + .name = "timer_1_2", + .modes = pmx_timer_1_2_modes, + .mode_count = ARRAY_SIZE(pmx_timer_1_2_modes), + .enb_on_reset = 0, +}; + +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) +/* plgpios devices */ +struct pmx_dev_mode pmx_plgpio_0_1_modes[] = { + { + .ids = 0x00, + .mask = PMX_FIRDA_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_0_1 = { + .name = "plgpio 0 and 1", + .modes = pmx_plgpio_0_1_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_2_3_modes[] = { + { + .ids = 0x00, + .mask = PMX_UART0_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_2_3 = { + .name = "plgpio 2 and 3", + .modes = pmx_plgpio_2_3_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_4_5_modes[] = { + { + .ids = 0x00, + .mask = PMX_I2C_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_4_5 = { + .name = "plgpio 4 and 5", + .modes = pmx_plgpio_4_5_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_6_9_modes[] = { + { + .ids = 0x00, + .mask = PMX_SSP_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_6_9 = { + .name = "plgpio 6 to 9", + .modes = pmx_plgpio_6_9_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_10_27_modes[] = { + { + .ids = 0x00, + .mask = PMX_MII_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_10_27 = { + .name = "plgpio 10 to 27", + .modes = pmx_plgpio_10_27_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_28_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN0_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_28 = { + .name = "plgpio 28", + .modes = pmx_plgpio_28_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_28_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_29_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN1_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_29 = { + .name = "plgpio 29", + .modes = pmx_plgpio_29_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_29_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_30_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN2_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_30 = { + .name = "plgpio 30", + .modes = pmx_plgpio_30_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_30_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_31_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN3_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_31 = { + .name = "plgpio 31", + .modes = pmx_plgpio_31_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_31_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_32_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN4_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_32 = { + .name = "plgpio 32", + .modes = pmx_plgpio_32_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_32_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_33_modes[] = { + { + .ids = 0x00, + .mask = PMX_GPIO_PIN5_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_33 = { + .name = "plgpio 33", + .modes = pmx_plgpio_33_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_33_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_34_36_modes[] = { + { + .ids = 0x00, + .mask = PMX_SSP_CS_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_34_36 = { + .name = "plgpio 34 to 36", + .modes = pmx_plgpio_34_36_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_37_42_modes[] = { + { + .ids = 0x00, + .mask = PMX_UART0_MODEM_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_37_42 = { + .name = "plgpio 37 to 42", + .modes = pmx_plgpio_37_42_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_1_2_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_43_44_47_48 = { + .name = "plgpio 43, 44, 47 and 48", + .modes = pmx_plgpio_43_44_47_48_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes), + .enb_on_reset = 1, +}; + +struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = { + { + .ids = 0x00, + .mask = PMX_TIMER_3_4_MASK, + }, +}; + +struct pmx_dev pmx_plgpio_45_46_49_50 = { + .name = "plgpio 45, 46, 49 and 50", + .modes = pmx_plgpio_45_46_49_50_modes, + .mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes), + .enb_on_reset = 1, +}; + +#endif + +/* spear padmux initialization function */ +void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size) +{ + int ret = 0; + + /* pad mux initialization */ + pmx_driver->base = ioremap(base, size); + if (!pmx_driver->base) { + ret = -ENOMEM; + goto pmx_fail; + } + + ret = pmx_register(pmx_driver); + iounmap(pmx_driver->base); + +pmx_fail: + if (ret) + printk(KERN_ERR "padmux: registeration failed. err no: %d\n", + ret); +} diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig new file mode 100644 index 000000000000..bddba034f862 --- /dev/null +++ b/arch/arm/mach-spear6xx/Kconfig @@ -0,0 +1,20 @@ +# +# SPEAr6XX Machine configuration file +# + +if ARCH_SPEAR6XX + +choice + prompt "SPEAr6XX Family" + default MACH_SPEAR600 + +config MACH_SPEAR600 + bool "SPEAr600" + help + Supports ST SPEAr600 Machine +endchoice + +# Adding SPEAr6XX machine specific configuration files +source "arch/arm/mach-spear6xx/Kconfig600" + +endif #ARCH_SPEAR6XX diff --git a/arch/arm/mach-spear6xx/Kconfig600 b/arch/arm/mach-spear6xx/Kconfig600 new file mode 100644 index 000000000000..9e19f65eb78e --- /dev/null +++ b/arch/arm/mach-spear6xx/Kconfig600 @@ -0,0 +1,17 @@ +# +# SPEAr600 machine configuration file +# + +if MACH_SPEAR600 + +choice + prompt "SPEAr600 Boards" + default BOARD_SPEAR600_EVB + +config BOARD_SPEAR600_EVB + bool "SPEAr600 Evaluation Board" + help + Supports ST SPEAr600 Evaluation Board +endchoice + +endif #MACH_SPEAR600 diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile new file mode 100644 index 000000000000..cc1a4d82d459 --- /dev/null +++ b/arch/arm/mach-spear6xx/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for SPEAr6XX machine series +# + +# common files +obj-y += clock.o spear6xx.o + +# spear600 specific files +obj-$(CONFIG_MACH_SPEAR600) += spear600.o + +# spear600 boards files +obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot new file mode 100644 index 000000000000..7a1f3c0eadb8 --- /dev/null +++ b/arch/arm/mach-spear6xx/Makefile.boot @@ -0,0 +1,3 @@ +zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c new file mode 100644 index 000000000000..13e27c769685 --- /dev/null +++ b/arch/arm/mach-spear6xx/clock.c @@ -0,0 +1,483 @@ +/* + * arch/arm/mach-spear6xx/clock.c + * + * SPEAr6xx machines clock framework source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <mach/misc_regs.h> +#include <plat/clock.h> + +/* root clks */ +/* 32 KHz oscillator clock */ +static struct clk osc_32k_clk = { + .flags = ALWAYS_ENABLED, + .rate = 32000, +}; + +/* 30 MHz oscillator clock */ +static struct clk osc_30m_clk = { + .flags = ALWAYS_ENABLED, + .rate = 30000000, +}; + +/* clock derived from 32 KHz osc clk */ +/* rtc clock */ +static struct clk rtc_clk = { + .pclk = &osc_32k_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = RTC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clock derived from 30 MHz osc clk */ +/* pll1 configuration structure */ +static struct pll_clk_config pll1_config = { + .mode_reg = PLL1_CTR, + .cfg_reg = PLL1_FRQ, +}; + +/* PLL1 clock */ +static struct clk pll1_clk = { + .pclk = &osc_30m_clk, + .en_reg = PLL1_CTR, + .en_reg_bit = PLL_ENABLE, + .recalc = &pll1_clk_recalc, + .private_data = &pll1_config, +}; + +/* PLL3 48 MHz clock */ +static struct clk pll3_48m_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &osc_30m_clk, + .rate = 48000000, +}; + +/* watch dog timer clock */ +static struct clk wdt_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &osc_30m_clk, + .recalc = &follow_parent, +}; + +/* clock derived from pll1 clk */ +/* cpu clock */ +static struct clk cpu_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .recalc = &follow_parent, +}; + +/* ahb configuration structure */ +static struct bus_clk_config ahb_config = { + .reg = CORE_CLK_CFG, + .mask = PLL_HCLK_RATIO_MASK, + .shift = PLL_HCLK_RATIO_SHIFT, +}; + +/* ahb clock */ +static struct clk ahb_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .recalc = &bus_clk_recalc, + .private_data = &ahb_config, +}; + +/* uart parents */ +static struct pclk_info uart_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* uart parent select structure */ +static struct pclk_sel uart_pclk_sel = { + .pclk_info = uart_pclk_info, + .pclk_count = ARRAY_SIZE(uart_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = UART_CLK_MASK, +}; + +/* uart configurations */ +static struct aux_clk_config uart_config = { + .synth_reg = UART_CLK_SYNT, +}; + +/* uart0 clock */ +static struct clk uart0_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = UART0_CLK_ENB, + .pclk_sel = &uart_pclk_sel, + .pclk_sel_shift = UART_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &uart_config, +}; + +/* uart1 clock */ +static struct clk uart1_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = UART1_CLK_ENB, + .pclk_sel = &uart_pclk_sel, + .pclk_sel_shift = UART_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &uart_config, +}; + +/* firda configurations */ +static struct aux_clk_config firda_config = { + .synth_reg = FIRDA_CLK_SYNT, +}; + +/* firda parents */ +static struct pclk_info firda_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* firda parent select structure */ +static struct pclk_sel firda_pclk_sel = { + .pclk_info = firda_pclk_info, + .pclk_count = ARRAY_SIZE(firda_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = FIRDA_CLK_MASK, +}; + +/* firda clock */ +static struct clk firda_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = FIRDA_CLK_ENB, + .pclk_sel = &firda_pclk_sel, + .pclk_sel_shift = FIRDA_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &firda_config, +}; + +/* clcd configurations */ +static struct aux_clk_config clcd_config = { + .synth_reg = CLCD_CLK_SYNT, +}; + +/* clcd parents */ +static struct pclk_info clcd_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* clcd parent select structure */ +static struct pclk_sel clcd_pclk_sel = { + .pclk_info = clcd_pclk_info, + .pclk_count = ARRAY_SIZE(clcd_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = CLCD_CLK_MASK, +}; + +/* clcd clock */ +static struct clk clcd_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = CLCD_CLK_ENB, + .pclk_sel = &clcd_pclk_sel, + .pclk_sel_shift = CLCD_CLK_SHIFT, + .recalc = &aux_clk_recalc, + .private_data = &clcd_config, +}; + +/* gpt parents */ +static struct pclk_info gpt_pclk_info[] = { + { + .pclk = &pll1_clk, + .pclk_mask = AUX_CLK_PLL1_MASK, + .scalable = 1, + }, { + .pclk = &pll3_48m_clk, + .pclk_mask = AUX_CLK_PLL3_MASK, + .scalable = 0, + }, +}; + +/* gpt parent select structure */ +static struct pclk_sel gpt_pclk_sel = { + .pclk_info = gpt_pclk_info, + .pclk_count = ARRAY_SIZE(gpt_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = GPT_CLK_MASK, +}; + +/* gpt0_1 configurations */ +static struct aux_clk_config gpt0_1_config = { + .synth_reg = PRSC1_CLK_CFG, +}; + +/* gpt0 ARM1 subsystem timer clock */ +static struct clk gpt0_clk = { + .flags = ALWAYS_ENABLED, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT0_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt0_1_config, +}; + +/* gpt1 timer clock */ +static struct clk gpt1_clk = { + .flags = ALWAYS_ENABLED, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT1_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt0_1_config, +}; + +/* gpt2 configurations */ +static struct aux_clk_config gpt2_config = { + .synth_reg = PRSC2_CLK_CFG, +}; + +/* gpt2 timer clock */ +static struct clk gpt2_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPT2_CLK_ENB, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT2_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt2_config, +}; + +/* gpt3 configurations */ +static struct aux_clk_config gpt3_config = { + .synth_reg = PRSC3_CLK_CFG, +}; + +/* gpt3 timer clock */ +static struct clk gpt3_clk = { + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPT3_CLK_ENB, + .pclk_sel = &gpt_pclk_sel, + .pclk_sel_shift = GPT3_CLK_SHIFT, + .recalc = &gpt_clk_recalc, + .private_data = &gpt3_config, +}; + +/* clock derived from pll3 clk */ +/* usbh0 clock */ +static struct clk usbh0_clk = { + .pclk = &pll3_48m_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = USBH0_CLK_ENB, + .recalc = &follow_parent, +}; + +/* usbh1 clock */ +static struct clk usbh1_clk = { + .pclk = &pll3_48m_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = USBH1_CLK_ENB, + .recalc = &follow_parent, +}; + +/* usbd clock */ +static struct clk usbd_clk = { + .pclk = &pll3_48m_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = USBD_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clock derived from ahb clk */ +/* apb configuration structure */ +static struct bus_clk_config apb_config = { + .reg = CORE_CLK_CFG, + .mask = HCLK_PCLK_RATIO_MASK, + .shift = HCLK_PCLK_RATIO_SHIFT, +}; + +/* apb clock */ +static struct clk apb_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &ahb_clk, + .recalc = &bus_clk_recalc, + .private_data = &apb_config, +}; + +/* i2c clock */ +static struct clk i2c_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = I2C_CLK_ENB, + .recalc = &follow_parent, +}; + +/* dma clock */ +static struct clk dma_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = DMA_CLK_ENB, + .recalc = &follow_parent, +}; + +/* jpeg clock */ +static struct clk jpeg_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = JPEG_CLK_ENB, + .recalc = &follow_parent, +}; + +/* gmac clock */ +static struct clk gmac_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GMAC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* smi clock */ +static struct clk smi_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SMI_CLK_ENB, + .recalc = &follow_parent, +}; + +/* fsmc clock */ +static struct clk fsmc_clk = { + .pclk = &ahb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = FSMC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* clock derived from apb clk */ +/* adc clock */ +static struct clk adc_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = ADC_CLK_ENB, + .recalc = &follow_parent, +}; + +/* ssp0 clock */ +static struct clk ssp0_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SSP0_CLK_ENB, + .recalc = &follow_parent, +}; + +/* ssp1 clock */ +static struct clk ssp1_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SSP1_CLK_ENB, + .recalc = &follow_parent, +}; + +/* ssp2 clock */ +static struct clk ssp2_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = SSP2_CLK_ENB, + .recalc = &follow_parent, +}; + +/* gpio0 ARM subsystem clock */ +static struct clk gpio0_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; + +/* gpio1 clock */ +static struct clk gpio1_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPIO1_CLK_ENB, + .recalc = &follow_parent, +}; + +/* gpio2 clock */ +static struct clk gpio2_clk = { + .pclk = &apb_clk, + .en_reg = PERIP1_CLK_ENB, + .en_reg_bit = GPIO2_CLK_ENB, + .recalc = &follow_parent, +}; + +/* array of all spear 6xx clock lookups */ +static struct clk_lookup spear_clk_lookups[] = { + /* root clks */ + { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, + { .con_id = "osc_30m_clk", .clk = &osc_30m_clk}, + /* clock derived from 32 KHz os clk */ + { .dev_id = "rtc", .clk = &rtc_clk}, + /* clock derived from 30 MHz os clk */ + { .con_id = "pll1_clk", .clk = &pll1_clk}, + { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, + { .dev_id = "wdt", .clk = &wdt_clk}, + /* clock derived from pll1 clk */ + { .con_id = "cpu_clk", .clk = &cpu_clk}, + { .con_id = "ahb_clk", .clk = &ahb_clk}, + { .dev_id = "uart0", .clk = &uart0_clk}, + { .dev_id = "uart1", .clk = &uart1_clk}, + { .dev_id = "firda", .clk = &firda_clk}, + { .dev_id = "clcd", .clk = &clcd_clk}, + { .dev_id = "gpt0", .clk = &gpt0_clk}, + { .dev_id = "gpt1", .clk = &gpt1_clk}, + { .dev_id = "gpt2", .clk = &gpt2_clk}, + { .dev_id = "gpt3", .clk = &gpt3_clk}, + /* clock derived from pll3 clk */ + { .dev_id = "usbh0", .clk = &usbh0_clk}, + { .dev_id = "usbh1", .clk = &usbh1_clk}, + { .dev_id = "usbd", .clk = &usbd_clk}, + /* clock derived from ahb clk */ + { .con_id = "apb_clk", .clk = &apb_clk}, + { .dev_id = "i2c", .clk = &i2c_clk}, + { .dev_id = "dma", .clk = &dma_clk}, + { .dev_id = "jpeg", .clk = &jpeg_clk}, + { .dev_id = "gmac", .clk = &gmac_clk}, + { .dev_id = "smi", .clk = &smi_clk}, + { .dev_id = "fsmc", .clk = &fsmc_clk}, + /* clock derived from apb clk */ + { .dev_id = "adc", .clk = &adc_clk}, + { .dev_id = "ssp0", .clk = &ssp0_clk}, + { .dev_id = "ssp1", .clk = &ssp1_clk}, + { .dev_id = "ssp2", .clk = &ssp2_clk}, + { .dev_id = "gpio0", .clk = &gpio0_clk}, + { .dev_id = "gpio1", .clk = &gpio1_clk}, + { .dev_id = "gpio2", .clk = &gpio2_clk}, +}; + +void __init clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + recalc_root_clocks(); +} diff --git a/arch/arm/mach-spear6xx/include/mach/clkdev.h b/arch/arm/mach-spear6xx/include/mach/clkdev.h new file mode 100644 index 000000000000..05676bf440d3 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/clkdev.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/clkdev.h + * + * Clock Dev framework definitions for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +#include <plat/clkdev.h> + +#endif /* __MACH_CLKDEV_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/debug-macro.S b/arch/arm/mach-spear6xx/include/mach/debug-macro.S new file mode 100644 index 000000000000..0f3ea39edd96 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/debug-macro.S @@ -0,0 +1,14 @@ +/* + * arch/arm/mach-spear6xx/include/mach/debug-macro.S + * + * Debugging macro include header for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S new file mode 100644 index 000000000000..9eaecaeafcf0 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/entry-macro.S @@ -0,0 +1,55 @@ +/* + * arch/arm/mach-spear6xx/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <mach/hardware.h> +#include <mach/spear.h> +#include <asm/hardware/vic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \base, =VA_SPEAR6XX_CPU_VIC_PRI_BASE + ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status + mov \irqnr, #0 + teq \irqstat, #0 + bne 1001f + ldr \base, =VA_SPEAR6XX_CPU_VIC_SEC_BASE + ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get status + teq \irqstat, #0 + beq 1002f @ this will set/reset + @ zero register + mov \irqnr, #32 +1001: + /* + * Following code will find bit position of least significang + * bit set in irqstat, using following equation + * least significant bit set in n = (n & ~(n-1)) + */ + sub \tmp, \irqstat, #1 @ tmp = irqstat - 1 + mvn \tmp, \tmp @ tmp = ~tmp + and \irqstat, \irqstat, \tmp @ irqstat &= tmp + /* Now, irqstat is = bit no. of 1st bit set in vic irq status */ + clz \tmp, \irqstat @ tmp = leading zeros + + rsb \tmp, \tmp, #0x1F @ tmp = 32 - tmp - 1 + add \irqnr, \irqnr, \tmp + +1002: /* EQ will be set if no irqs pending */ + .endm diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h new file mode 100644 index 000000000000..16205a538756 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/generic.h @@ -0,0 +1,45 @@ +/* + * arch/arm/mach-spear6xx/include/mach/generic.h + * + * SPEAr6XX machine family specific generic header file + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_GENERIC_H +#define __MACH_GENERIC_H + +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/amba/bus.h> + +/* + * Each GPT has 2 timer channels + * Following GPT channels will be used as clock source and clockevent + */ +#define SPEAR_GPT0_BASE SPEAR6XX_CPU_TMR_BASE +#define SPEAR_GPT0_CHAN0_IRQ IRQ_CPU_GPT1_1 +#define SPEAR_GPT0_CHAN1_IRQ IRQ_CPU_GPT1_2 + +/* Add spear6xx family device structure declarations here */ +extern struct amba_device gpio_device[]; +extern struct amba_device uart_device[]; +extern struct sys_timer spear_sys_timer; + +/* Add spear6xx family function declarations here */ +void __init spear6xx_map_io(void); +void __init spear6xx_init_irq(void); +void __init spear6xx_init(void); +void __init spear600_init(void); +void __init clk_init(void); + +/* Add spear600 machine device structure declarations here */ + +#endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h new file mode 100644 index 000000000000..3a789dbb69f7 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/gpio.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/gpio.h + * + * GPIO macros for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_GPIO_H +#define __MACH_GPIO_H + +#include <plat/gpio.h> + +#endif /* __MACH_GPIO_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h new file mode 100644 index 000000000000..7545116deca9 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/hardware.h @@ -0,0 +1,21 @@ +/* + * arch/arm/mach-spear6xx/include/mach/hardware.h + * + * Hardware definitions for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +/* Vitual to physical translation of statically mapped space */ +#define IO_ADDRESS(x) (x | 0xF0000000) + +#endif /* __MACH_HARDWARE_H */ + diff --git a/arch/arm/mach-spear6xx/include/mach/io.h b/arch/arm/mach-spear6xx/include/mach/io.h new file mode 100644 index 000000000000..fb7c106cea94 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/io.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-spear6xx/include/mach/io.h + * + * IO definitions for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_IO_H +#define __MACH_IO_H + +#include <plat/io.h> + +#endif /* __MACH_IO_H */ + diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h new file mode 100644 index 000000000000..8f214b03d75d --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/irqs.h @@ -0,0 +1,97 @@ +/* + * arch/arm/mach-spear6xx/include/mach/irqs.h + * + * IRQ helper macros for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +/* IRQ definitions */ +/* VIC 1 */ +#define IRQ_INTRCOMM_SW_IRQ 0 +#define IRQ_INTRCOMM_CPU_1 1 +#define IRQ_INTRCOMM_CPU_2 2 +#define IRQ_INTRCOMM_RAS2A11_1 3 +#define IRQ_INTRCOMM_RAS2A11_2 4 +#define IRQ_INTRCOMM_RAS2A12_1 5 +#define IRQ_INTRCOMM_RAS2A12_2 6 +#define IRQ_GEN_RAS_0 7 +#define IRQ_GEN_RAS_1 8 +#define IRQ_GEN_RAS_2 9 +#define IRQ_GEN_RAS_3 10 +#define IRQ_GEN_RAS_4 11 +#define IRQ_GEN_RAS_5 12 +#define IRQ_GEN_RAS_6 13 +#define IRQ_GEN_RAS_7 14 +#define IRQ_GEN_RAS_8 15 +#define IRQ_CPU_GPT1_1 16 +#define IRQ_CPU_GPT1_2 17 +#define IRQ_LOCAL_GPIO 18 +#define IRQ_PLL_UNLOCK 19 +#define IRQ_JPEG 20 +#define IRQ_FSMC 21 +#define IRQ_IRDA 22 +#define IRQ_RESERVED 23 +#define IRQ_UART_0 24 +#define IRQ_UART_1 25 +#define IRQ_SSP_1 26 +#define IRQ_SSP_2 27 +#define IRQ_I2C 28 +#define IRQ_GEN_RAS_9 29 +#define IRQ_GEN_RAS_10 30 +#define IRQ_GEN_RAS_11 31 + +/* VIC 2 */ +#define IRQ_APPL_GPT1_1 32 +#define IRQ_APPL_GPT1_2 33 +#define IRQ_APPL_GPT2_1 34 +#define IRQ_APPL_GPT2_2 35 +#define IRQ_APPL_GPIO 36 +#define IRQ_APPL_SSP 37 +#define IRQ_APPL_ADC 38 +#define IRQ_APPL_RESERVED 39 +#define IRQ_AHB_EXP_MASTER 40 +#define IRQ_DDR_CONTROLLER 41 +#define IRQ_BASIC_DMA 42 +#define IRQ_BASIC_RESERVED1 43 +#define IRQ_BASIC_SMI 44 +#define IRQ_BASIC_CLCD 45 +#define IRQ_EXP_AHB_1 46 +#define IRQ_EXP_AHB_2 47 +#define IRQ_BASIC_GPT1_1 48 +#define IRQ_BASIC_GPT1_2 49 +#define IRQ_BASIC_RTC 50 +#define IRQ_BASIC_GPIO 51 +#define IRQ_BASIC_WDT 52 +#define IRQ_BASIC_RESERVED 53 +#define IRQ_AHB_EXP_SLAVE 54 +#define IRQ_GMAC_1 55 +#define IRQ_GMAC_2 56 +#define IRQ_USB_DEV 57 +#define IRQ_USB_H_OHCI_0 58 +#define IRQ_USB_H_EHCI_0 59 +#define IRQ_USB_H_OHCI_1 60 +#define IRQ_USB_H_EHCI_1 61 +#define IRQ_EXP_AHB_3 62 +#define IRQ_EXP_AHB_4 63 + +#define IRQ_VIC_END 64 + +/* GPIO pins virtual irqs */ +#define SPEAR_GPIO_INT_BASE IRQ_VIC_END +#define SPEAR_GPIO0_INT_BASE SPEAR_GPIO_INT_BASE +#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO0_INT_BASE + 8) +#define SPEAR_GPIO2_INT_BASE (SPEAR_GPIO1_INT_BASE + 8) +#define SPEAR_GPIO_INT_END (SPEAR_GPIO2_INT_BASE + 8) +#define VIRTUAL_IRQS (SPEAR_GPIO_INT_END - IRQ_VIC_END) +#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) + +#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h new file mode 100644 index 000000000000..781f088fc228 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/memory.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/memory.h + * + * Memory map for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_MEMORY_H +#define __MACH_MEMORY_H + +#include <plat/memory.h> + +#endif /* __MACH_MEMORY_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h new file mode 100644 index 000000000000..03908036b0d0 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -0,0 +1,173 @@ +/* + * arch/arm/mach-spear6xx/include/mach/misc_regs.h + * + * Miscellaneous registers definitions for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_MISC_REGS_H +#define __MACH_MISC_REGS_H + +#include <mach/spear.h> + +#define MISC_BASE VA_SPEAR6XX_ICM3_MISC_REG_BASE + +#define SOC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x000)) +#define DIAG_CFG_CTR ((unsigned int *)(MISC_BASE + 0x004)) +#define PLL1_CTR ((unsigned int *)(MISC_BASE + 0x008)) +#define PLL1_FRQ ((unsigned int *)(MISC_BASE + 0x00C)) +#define PLL1_MOD ((unsigned int *)(MISC_BASE + 0x010)) +#define PLL2_CTR ((unsigned int *)(MISC_BASE + 0x014)) +/* PLL_CTR register masks */ +#define PLL_ENABLE 2 +#define PLL_MODE_SHIFT 4 +#define PLL_MODE_MASK 0x3 +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSB 2 +#define PLL_MODE_DITH_SSB 3 + +#define PLL2_FRQ ((unsigned int *)(MISC_BASE + 0x018)) +/* PLL FRQ register masks */ +#define PLL_DIV_N_SHIFT 0 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_P_MASK 0x7 +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DITH_FDBK_M_MASK 0xFFFF + +#define PLL2_MOD ((unsigned int *)(MISC_BASE + 0x01C)) +#define PLL_CLK_CFG ((unsigned int *)(MISC_BASE + 0x020)) +#define CORE_CLK_CFG ((unsigned int *)(MISC_BASE + 0x024)) +/* CORE CLK CFG register masks */ +#define PLL_HCLK_RATIO_SHIFT 10 +#define PLL_HCLK_RATIO_MASK 0x3 +#define HCLK_PCLK_RATIO_SHIFT 8 +#define HCLK_PCLK_RATIO_MASK 0x3 + +#define PERIP_CLK_CFG ((unsigned int *)(MISC_BASE + 0x028)) +/* PERIP_CLK_CFG register masks */ +#define CLCD_CLK_SHIFT 2 +#define CLCD_CLK_MASK 0x3 +#define UART_CLK_SHIFT 4 +#define UART_CLK_MASK 0x1 +#define FIRDA_CLK_SHIFT 5 +#define FIRDA_CLK_MASK 0x3 +#define GPT0_CLK_SHIFT 8 +#define GPT1_CLK_SHIFT 10 +#define GPT2_CLK_SHIFT 11 +#define GPT3_CLK_SHIFT 12 +#define GPT_CLK_MASK 0x1 +#define AUX_CLK_PLL3_MASK 0 +#define AUX_CLK_PLL1_MASK 1 + +#define PERIP1_CLK_ENB ((unsigned int *)(MISC_BASE + 0x02C)) +/* PERIP1_CLK_ENB register masks */ +#define UART0_CLK_ENB 3 +#define UART1_CLK_ENB 4 +#define SSP0_CLK_ENB 5 +#define SSP1_CLK_ENB 6 +#define I2C_CLK_ENB 7 +#define JPEG_CLK_ENB 8 +#define FSMC_CLK_ENB 9 +#define FIRDA_CLK_ENB 10 +#define GPT2_CLK_ENB 11 +#define GPT3_CLK_ENB 12 +#define GPIO2_CLK_ENB 13 +#define SSP2_CLK_ENB 14 +#define ADC_CLK_ENB 15 +#define GPT1_CLK_ENB 11 +#define RTC_CLK_ENB 17 +#define GPIO1_CLK_ENB 18 +#define DMA_CLK_ENB 19 +#define SMI_CLK_ENB 21 +#define CLCD_CLK_ENB 22 +#define GMAC_CLK_ENB 23 +#define USBD_CLK_ENB 24 +#define USBH0_CLK_ENB 25 +#define USBH1_CLK_ENB 26 + +#define SOC_CORE_ID ((unsigned int *)(MISC_BASE + 0x030)) +#define RAS_CLK_ENB ((unsigned int *)(MISC_BASE + 0x034)) +#define PERIP1_SOF_RST ((unsigned int *)(MISC_BASE + 0x038)) +/* PERIP1_SOF_RST register masks */ +#define JPEG_SOF_RST 8 + +#define SOC_USER_ID ((unsigned int *)(MISC_BASE + 0x03C)) +#define RAS_SOF_RST ((unsigned int *)(MISC_BASE + 0x040)) +#define PRSC1_CLK_CFG ((unsigned int *)(MISC_BASE + 0x044)) +#define PRSC2_CLK_CFG ((unsigned int *)(MISC_BASE + 0x048)) +#define PRSC3_CLK_CFG ((unsigned int *)(MISC_BASE + 0x04C)) +/* gpt synthesizer register masks */ +#define GPT_MSCALE_SHIFT 0 +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +#define AMEM_CLK_CFG ((unsigned int *)(MISC_BASE + 0x050)) +#define EXPI_CLK_CFG ((unsigned int *)(MISC_BASE + 0x054)) +#define CLCD_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x05C)) +#define FIRDA_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x060)) +#define UART_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x064)) +#define GMAC_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x068)) +#define RAS1_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x06C)) +#define RAS2_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x070)) +#define RAS3_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x074)) +#define RAS4_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x078)) +/* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF + +#define ICM1_ARB_CFG ((unsigned int *)(MISC_BASE + 0x07C)) +#define ICM2_ARB_CFG ((unsigned int *)(MISC_BASE + 0x080)) +#define ICM3_ARB_CFG ((unsigned int *)(MISC_BASE + 0x084)) +#define ICM4_ARB_CFG ((unsigned int *)(MISC_BASE + 0x088)) +#define ICM5_ARB_CFG ((unsigned int *)(MISC_BASE + 0x08C)) +#define ICM6_ARB_CFG ((unsigned int *)(MISC_BASE + 0x090)) +#define ICM7_ARB_CFG ((unsigned int *)(MISC_BASE + 0x094)) +#define ICM8_ARB_CFG ((unsigned int *)(MISC_BASE + 0x098)) +#define ICM9_ARB_CFG ((unsigned int *)(MISC_BASE + 0x09C)) +#define DMA_CHN_CFG ((unsigned int *)(MISC_BASE + 0x0A0)) +#define USB2_PHY_CFG ((unsigned int *)(MISC_BASE + 0x0A4)) +#define GMAC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0A8)) +#define EXPI_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0AC)) +#define PRC1_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C0)) +#define PRC2_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C4)) +#define PRC3_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C8)) +#define PRC4_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0CC)) +#define PRC1_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D0)) +#define PRC2_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D4)) +#define PRC3_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D8)) +#define PRC4_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0DC)) +#define PWRDOWN_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0E0)) +#define COMPSSTL_1V8_CFG ((unsigned int *)(MISC_BASE + 0x0E4)) +#define COMPSSTL_2V5_CFG ((unsigned int *)(MISC_BASE + 0x0E8)) +#define COMPCOR_3V3_CFG ((unsigned int *)(MISC_BASE + 0x0EC)) +#define SSTLPAD_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F0)) +#define BIST1_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F4)) +#define BIST2_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F8)) +#define BIST3_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0FC)) +#define BIST4_CFG_CTR ((unsigned int *)(MISC_BASE + 0x100)) +#define BIST5_CFG_CTR ((unsigned int *)(MISC_BASE + 0x104)) +#define BIST1_STS_RES ((unsigned int *)(MISC_BASE + 0x108)) +#define BIST2_STS_RES ((unsigned int *)(MISC_BASE + 0x10C)) +#define BIST3_STS_RES ((unsigned int *)(MISC_BASE + 0x110)) +#define BIST4_STS_RES ((unsigned int *)(MISC_BASE + 0x114)) +#define BIST5_STS_RES ((unsigned int *)(MISC_BASE + 0x118)) +#define SYSERR_CFG_CTR ((unsigned int *)(MISC_BASE + 0x11C)) + +#endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h new file mode 100644 index 000000000000..a835f5b6b182 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/spear.h @@ -0,0 +1,173 @@ +/* + * arch/arm/mach-spear6xx/include/mach/spear.h + * + * SPEAr6xx Machine family specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SPEAR6XX_H +#define __MACH_SPEAR6XX_H + +#include <mach/hardware.h> +#include <mach/spear600.h> + +#define SPEAR6XX_ML_SDRAM_BASE 0x00000000 +#define SPEAR6XX_ML_SDRAM_SIZE 0x40000000 + +/* ICM1 - Low speed connection */ +#define SPEAR6XX_ICM1_BASE 0xD0000000 +#define SPEAR6XX_ICM1_SIZE 0x08000000 + +#define SPEAR6XX_ICM1_UART0_BASE 0xD0000000 +#define VA_SPEAR6XX_ICM1_UART0_BASE IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE) +#define SPEAR6XX_ICM1_UART0_SIZE 0x00080000 + +#define SPEAR6XX_ICM1_UART1_BASE 0xD0080000 +#define SPEAR6XX_ICM1_UART1_SIZE 0x00080000 + +#define SPEAR6XX_ICM1_SSP0_BASE 0xD0100000 +#define SPEAR6XX_ICM1_SSP0_SIZE 0x00080000 + +#define SPEAR6XX_ICM1_SSP1_BASE 0xD0180000 +#define SPEAR6XX_ICM1_SSP1_SIZE 0x00080000 + +#define SPEAR6XX_ICM1_I2C_BASE 0xD0200000 +#define SPEAR6XX_ICM1_I2C_SIZE 0x00080000 + +#define SPEAR6XX_ICM1_JPEG_BASE 0xD0800000 +#define SPEAR6XX_ICM1_JPEG_SIZE 0x00800000 + +#define SPEAR6XX_ICM1_IRDA_BASE 0xD1000000 +#define SPEAR6XX_ICM1_IRDA_SIZE 0x00800000 + +#define SPEAR6XX_ICM1_FSMC_BASE 0xD1800000 +#define SPEAR6XX_ICM1_FSMC_SIZE 0x00800000 + +#define SPEAR6XX_ICM1_NAND_BASE 0xD2000000 +#define SPEAR6XX_ICM1_NAND_SIZE 0x00800000 + +#define SPEAR6XX_ICM1_SRAM_BASE 0xD2800000 +#define SPEAR6XX_ICM1_SRAM_SIZE 0x00800000 + +/* ICM2 - Application Subsystem */ +#define SPEAR6XX_ICM2_BASE 0xD8000000 +#define SPEAR6XX_ICM2_SIZE 0x08000000 + +#define SPEAR6XX_ICM2_TMR0_BASE 0xD8000000 +#define SPEAR6XX_ICM2_TMR0_SIZE 0x00080000 + +#define SPEAR6XX_ICM2_TMR1_BASE 0xD8080000 +#define SPEAR6XX_ICM2_TMR1_SIZE 0x00080000 + +#define SPEAR6XX_ICM2_GPIO_BASE 0xD8100000 +#define SPEAR6XX_ICM2_GPIO_SIZE 0x00080000 + +#define SPEAR6XX_ICM2_SPI2_BASE 0xD8180000 +#define SPEAR6XX_ICM2_SPI2_SIZE 0x00080000 + +#define SPEAR6XX_ICM2_ADC_BASE 0xD8200000 +#define SPEAR6XX_ICM2_ADC_SIZE 0x00080000 + +/* ML-1, 2 - Multi Layer CPU Subsystem */ +#define SPEAR6XX_ML_CPU_BASE 0xF0000000 +#define SPEAR6XX_ML_CPU_SIZE 0x08000000 + +#define SPEAR6XX_CPU_TMR_BASE 0xF0000000 +#define SPEAR6XX_CPU_TMR_SIZE 0x00100000 + +#define SPEAR6XX_CPU_GPIO_BASE 0xF0100000 +#define SPEAR6XX_CPU_GPIO_SIZE 0x00100000 + +#define SPEAR6XX_CPU_VIC_SEC_BASE 0xF1000000 +#define VA_SPEAR6XX_CPU_VIC_SEC_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE) +#define SPEAR6XX_CPU_VIC_SEC_SIZE 0x00100000 + +#define SPEAR6XX_CPU_VIC_PRI_BASE 0xF1100000 +#define VA_SPEAR6XX_CPU_VIC_PRI_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE) +#define SPEAR6XX_CPU_VIC_PRI_SIZE 0x00100000 + +/* ICM3 - Basic Subsystem */ +#define SPEAR6XX_ICM3_BASE 0xF8000000 +#define SPEAR6XX_ICM3_SIZE 0x08000000 + +#define SPEAR6XX_ICM3_SMEM_BASE 0xF8000000 +#define SPEAR6XX_ICM3_SMEM_SIZE 0x04000000 + +#define SPEAR6XX_ICM3_SMI_CTRL_BASE 0xFC000000 +#define SPEAR6XX_ICM3_SMI_CTRL_SIZE 0x00200000 + +#define SPEAR6XX_ICM3_CLCD_BASE 0xFC200000 +#define SPEAR6XX_ICM3_CLCD_SIZE 0x00200000 + +#define SPEAR6XX_ICM3_DMA_BASE 0xFC400000 +#define SPEAR6XX_ICM3_DMA_SIZE 0x00200000 + +#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE 0xFC600000 +#define SPEAR6XX_ICM3_SDRAM_CTRL_SIZE 0x00200000 + +#define SPEAR6XX_ICM3_TMR_BASE 0xFC800000 +#define SPEAR6XX_ICM3_TMR_SIZE 0x00080000 + +#define SPEAR6XX_ICM3_WDT_BASE 0xFC880000 +#define SPEAR6XX_ICM3_WDT_SIZE 0x00080000 + +#define SPEAR6XX_ICM3_RTC_BASE 0xFC900000 +#define SPEAR6XX_ICM3_RTC_SIZE 0x00080000 + +#define SPEAR6XX_ICM3_GPIO_BASE 0xFC980000 +#define SPEAR6XX_ICM3_GPIO_SIZE 0x00080000 + +#define SPEAR6XX_ICM3_SYS_CTRL_BASE 0xFCA00000 +#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE) +#define SPEAR6XX_ICM3_SYS_CTRL_SIZE 0x00080000 + +#define SPEAR6XX_ICM3_MISC_REG_BASE 0xFCA80000 +#define VA_SPEAR6XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE) +#define SPEAR6XX_ICM3_MISC_REG_SIZE 0x00080000 + +/* ICM4 - High Speed Connection */ +#define SPEAR6XX_ICM4_BASE 0xE0000000 +#define SPEAR6XX_ICM4_SIZE 0x08000000 + +#define SPEAR6XX_ICM4_GMAC_BASE 0xE0800000 +#define SPEAR6XX_ICM4_GMAC_SIZE 0x00800000 + +#define SPEAR6XX_ICM4_USBD_FIFO_BASE 0xE1000000 +#define SPEAR6XX_ICM4_USBD_FIFO_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USBD_CSR_BASE 0xE1100000 +#define SPEAR6XX_ICM4_USBD_CSR_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USBD_PLDT_BASE 0xE1200000 +#define SPEAR6XX_ICM4_USBD_PLDT_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USB_EHCI0_BASE 0xE1800000 +#define SPEAR6XX_ICM4_USB_EHCI0_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USB_OHCI0_BASE 0xE1900000 +#define SPEAR6XX_ICM4_USB_OHCI0_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USB_EHCI1_BASE 0xE2000000 +#define SPEAR6XX_ICM4_USB_EHCI1_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USB_OHCI1_BASE 0xE2100000 +#define SPEAR6XX_ICM4_USB_OHCI1_SIZE 0x00100000 + +#define SPEAR6XX_ICM4_USB_ARB_BASE 0xE2800000 +#define SPEAR6XX_ICM4_USB_ARB_SIZE 0x00010000 + +/* Debug uart for linux, will be used for debug and uncompress messages */ +#define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE +#define VA_SPEAR_DBG_UART_BASE VA_SPEAR6XX_ICM1_UART0_BASE + +/* Sysctl base for spear platform */ +#define SPEAR_SYS_CTRL_BASE SPEAR6XX_ICM3_SYS_CTRL_BASE +#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR6XX_ICM3_SYS_CTRL_BASE + +#endif /* __MACH_SPEAR6XX_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/spear600.h b/arch/arm/mach-spear6xx/include/mach/spear600.h new file mode 100644 index 000000000000..c068cc50b0fb --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/spear600.h @@ -0,0 +1,21 @@ +/* + * arch/arm/mach-spear66xx/include/mach/spear600.h + * + * SPEAr600 Machine specific definition + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifdef CONFIG_MACH_SPEAR600 + +#ifndef __MACH_SPEAR600_H +#define __MACH_SPEAR600_H + +#endif /* __MACH_SPEAR600_H */ + +#endif /* CONFIG_MACH_SPEAR600 */ diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h new file mode 100644 index 000000000000..0b1d2be81cfb --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/system.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/system.h + * + * SPEAr6xx Machine family specific architecture functions + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SYSTEM_H +#define __MACH_SYSTEM_H + +#include <plat/system.h> + +#endif /* __MACH_SYSTEM_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/timex.h b/arch/arm/mach-spear6xx/include/mach/timex.h new file mode 100644 index 000000000000..ac1c5b005695 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/timex.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/timex.h + * + * SPEAr6XX machine family specific timex definitions + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_TIMEX_H +#define __MACH_TIMEX_H + +#include <plat/timex.h> + +#endif /* __MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/uncompress.h b/arch/arm/mach-spear6xx/include/mach/uncompress.h new file mode 100644 index 000000000000..77f0765e21e1 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/uncompress.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_UNCOMPRESS_H +#define __MACH_UNCOMPRESS_H + +#include <plat/uncompress.h> + +#endif /* __MACH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/vmalloc.h b/arch/arm/mach-spear6xx/include/mach/vmalloc.h new file mode 100644 index 000000000000..4a0b56cb2a91 --- /dev/null +++ b/arch/arm/mach-spear6xx/include/mach/vmalloc.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear6xx/include/mach/vmalloc.h + * + * Defining Vmalloc area for SPEAr6xx machine family + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_VMALLOC_H +#define __MACH_VMALLOC_H + +#include <plat/vmalloc.h> + +#endif /* __MACH_VMALLOC_H */ diff --git a/arch/arm/mach-spear6xx/spear600.c b/arch/arm/mach-spear6xx/spear600.c new file mode 100644 index 000000000000..5c484c433dc1 --- /dev/null +++ b/arch/arm/mach-spear6xx/spear600.c @@ -0,0 +1,25 @@ +/* + * arch/arm/mach-spear6xx/spear600.c + * + * SPEAr600 machine source file + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/ptrace.h> +#include <asm/irq.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* Add spear600 specific devices here */ + +void __init spear600_init(void) +{ + /* call spear6xx family common init function */ + spear6xx_init(); +} diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c new file mode 100644 index 000000000000..daff8d04f7b6 --- /dev/null +++ b/arch/arm/mach-spear6xx/spear600_evb.c @@ -0,0 +1,51 @@ +/* + * arch/arm/mach-spear6xx/spear600_evb.c + * + * SPEAr600 evaluation board source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <mach/generic.h> +#include <mach/spear.h> + +static struct amba_device *amba_devs[] __initdata = { + &gpio_device[0], + &gpio_device[1], + &gpio_device[2], + &uart_device[0], + &uart_device[1], +}; + +static struct platform_device *plat_devs[] __initdata = { +}; + +static void __init spear600_evb_init(void) +{ + unsigned int i; + + /* call spear600 machine init function */ + spear600_init(); + + /* Add Platform Devices */ + platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); + + /* Add Amba Devices */ + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) + amba_device_register(amba_devs[i], &iomem_resource); +} + +MACHINE_START(SPEAR600, "ST-SPEAR600-EVB") + .boot_params = 0x00000100, + .map_io = spear6xx_map_io, + .init_irq = spear6xx_init_irq, + .timer = &spear_sys_timer, + .init_machine = spear600_evb_init, +MACHINE_END diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c new file mode 100644 index 000000000000..b67e571d4bf7 --- /dev/null +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -0,0 +1,158 @@ +/* + * arch/arm/mach-spear6xx/spear6xx.c + * + * SPEAr6XX machines common source file + * + * Copyright (C) 2009 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/types.h> +#include <linux/amba/pl061.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/io.h> +#include <asm/hardware/vic.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <mach/irqs.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* Add spear6xx machines common devices here */ +/* uart device registeration */ +struct amba_device uart_device[] = { + { + .dev = { + .init_name = "uart0", + }, + .res = { + .start = SPEAR6XX_ICM1_UART0_BASE, + .end = SPEAR6XX_ICM1_UART0_BASE + + SPEAR6XX_ICM1_UART0_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_UART_0, NO_IRQ}, + }, { + .dev = { + .init_name = "uart1", + }, + .res = { + .start = SPEAR6XX_ICM1_UART1_BASE, + .end = SPEAR6XX_ICM1_UART1_BASE + + SPEAR6XX_ICM1_UART1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_UART_1, NO_IRQ}, + } +}; + +/* gpio device registeration */ +static struct pl061_platform_data gpio_plat_data[] = { + { + .gpio_base = 0, + .irq_base = SPEAR_GPIO0_INT_BASE, + }, { + .gpio_base = 8, + .irq_base = SPEAR_GPIO1_INT_BASE, + }, { + .gpio_base = 16, + .irq_base = SPEAR_GPIO2_INT_BASE, + }, +}; + +struct amba_device gpio_device[] = { + { + .dev = { + .init_name = "gpio0", + .platform_data = &gpio_plat_data[0], + }, + .res = { + .start = SPEAR6XX_CPU_GPIO_BASE, + .end = SPEAR6XX_CPU_GPIO_BASE + + SPEAR6XX_CPU_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_LOCAL_GPIO, NO_IRQ}, + }, { + .dev = { + .init_name = "gpio1", + .platform_data = &gpio_plat_data[1], + }, + .res = { + .start = SPEAR6XX_ICM3_GPIO_BASE, + .end = SPEAR6XX_ICM3_GPIO_BASE + + SPEAR6XX_ICM3_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_BASIC_GPIO, NO_IRQ}, + }, { + .dev = { + .init_name = "gpio2", + .platform_data = &gpio_plat_data[2], + }, + .res = { + .start = SPEAR6XX_ICM2_GPIO_BASE, + .end = SPEAR6XX_ICM2_GPIO_BASE + + SPEAR6XX_ICM2_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_APPL_GPIO, NO_IRQ}, + } +}; + +/* This will add devices, and do machine specific tasks */ +void __init spear6xx_init(void) +{ + /* nothing to do for now */ +} + +/* This will initialize vic */ +void __init spear6xx_init_irq(void) +{ + vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0); + vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0); +} + +/* Following will create static virtual/physical mappings */ +static struct map_desc spear6xx_io_desc[] __initdata = { + { + .virtual = VA_SPEAR6XX_ICM1_UART0_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE), + .length = SPEAR6XX_ICM1_UART0_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE), + .length = SPEAR6XX_CPU_VIC_PRI_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE), + .length = SPEAR6XX_CPU_VIC_SEC_SIZE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE), + .length = SPEAR6XX_ICM3_MISC_REG_BASE, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE), + .length = SPEAR6XX_ICM3_MISC_REG_SIZE, + .type = MT_DEVICE + }, +}; + +/* This will create static memory mapping for selected devices */ +void __init spear6xx_map_io(void) +{ + iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc)); + + /* This will initialize clock framework */ + clk_init(); +} diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 77fbb1e0e528..88506d030596 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -102,11 +102,12 @@ int __devinit mmc_init(struct amba_device *adev) * we have a regulator we can control instead. */ /* Nominally 2.85V on our platform */ + mmci_card->mmc0_plat_data.f_max = 24000000; mmci_card->mmc0_plat_data.status = mmc_status; mmci_card->mmc0_plat_data.gpio_wp = -1; mmci_card->mmc0_plat_data.gpio_cd = -1; mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA; + MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data; diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 03625d744857..6625e5bbf4d6 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -1,15 +1,42 @@ -menu "ST-Ericsson platform type" - depends on ARCH_U8500 +if ARCH_U8500 -comment "ST-Ericsson Multicore Mobile Platforms" - -config MACH_U8500_MOP - bool "U8500 Early Development platform" +config UX500_SOC_COMMON + bool default y select ARM_GIC select HAS_MTU + select NOMADIK_GPIO + +config UX500_SOC_DB8500 + bool + +config UX500_SOC_DB5500 + bool + +choice + prompt "Ux500 target platform" + default MACH_U8500_MOP + +config MACH_U8500_MOP + bool "U8500 Development platform" + select UX500_SOC_DB8500 help Include support for mop500 development platform based on U8500 architecture. The platform is based on early drop silicon version of 8500. -endmenu + +config MACH_U5500 + bool "U5500 Development platform" + select UX500_SOC_DB5500 + help + Include support for the U5500 development platform. +endchoice + +config UX500_DEBUG_UART + int "Ux500 UART to use for low-level debug" + default 2 + help + Choose the UART on which kernel low-level debug messages should be + output. + +endif diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 95e6e24c0042..c7bc4199e3a8 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,7 +2,9 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := clock.o -obj-$(CONFIG_ARCH_U8500) += cpu-u8500.o +obj-y := clock.o cpu.o devices.o +obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o +obj-$(CONFIG_MACH_U5500) += board-u5500.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 803aec1d6728..072196c57263 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -17,37 +17,14 @@ #include <linux/amba/pl022.h> #include <linux/spi/spi.h> -#include <asm/localtimer.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <plat/mtu.h> #include <plat/i2c.h> #include <mach/hardware.h> #include <mach/setup.h> - -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} - -/* These are active devices on this board */ -static struct amba_device uart0_device = { - .dev = { .init_name = "uart0" }, - __MEM_4K_RESOURCE(U8500_UART0_BASE), - .irq = {IRQ_UART0, NO_IRQ}, -}; - -static struct amba_device uart1_device = { - .dev = { .init_name = "uart1" }, - __MEM_4K_RESOURCE(U8500_UART1_BASE), - .irq = {IRQ_UART1, NO_IRQ}, -}; - -static struct amba_device uart2_device = { - .dev = { .init_name = "uart2" }, - __MEM_4K_RESOURCE(U8500_UART2_BASE), - .irq = {IRQ_UART2, NO_IRQ}, -}; +#include <mach/devices.h> static void ab4500_spi_cs_control(u32 command) { @@ -93,55 +70,8 @@ static struct pl022_ssp_controller ssp0_platform_data = { .num_chipselect = 5, }; -static struct amba_device pl022_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "pl022", - .platform_data = &ssp0_platform_data, - }, - .res = { - .start = U8500_SSP0_BASE, - .end = U8500_SSP0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_SSP0, NO_IRQ }, - /* ST-Ericsson modified id */ - .periphid = SSP_PER_ID, -}; - -static struct amba_device pl031_device = { - .dev = { - .init_name = "pl031", - }, - .res = { - .start = U8500_RTC_BASE, - .end = U8500_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_RTC_RTT, NO_IRQ}, -}; - -#define U8500_I2C_RESOURCES(id, size) \ -static struct resource u8500_i2c_resources_##id[] = { \ - [0] = { \ - .start = U8500_I2C##id##_BASE, \ - .end = U8500_I2C##id##_BASE + size - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - [1] = { \ - .start = IRQ_I2C##id, \ - .end = IRQ_I2C##id, \ - .flags = IORESOURCE_IRQ \ - } \ -} - -U8500_I2C_RESOURCES(0, SZ_4K); -U8500_I2C_RESOURCES(1, SZ_4K); -U8500_I2C_RESOURCES(2, SZ_4K); -U8500_I2C_RESOURCES(3, SZ_4K); - #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ -static struct nmk_i2c_controller u8500_i2c_##id = { \ +static struct nmk_i2c_controller u8500_i2c##id##_data = { \ /* \ * slave data setup time, which is \ * 250 ns,100ns,10ns which is 14,6,2 \ @@ -169,58 +99,32 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -#define U8500_I2C_PDEVICE(cid) \ -static struct platform_device i2c_controller##cid = { \ - .name = "nmk-i2c", \ - .id = cid, \ - .num_resources = 2, \ - .resource = u8500_i2c_resources_##cid, \ - .dev = { \ - .platform_data = &u8500_i2c_##cid \ - } \ -} - -U8500_I2C_PDEVICE(0); -U8500_I2C_PDEVICE(1); -U8500_I2C_PDEVICE(2); -U8500_I2C_PDEVICE(3); - static struct amba_device *amba_devs[] __initdata = { - &uart0_device, - &uart1_device, - &uart2_device, - &pl022_device, - &pl031_device, + &ux500_uart0_device, + &ux500_uart1_device, + &ux500_uart2_device, + &u8500_ssp0_device, }; /* add any platform devices here - TODO */ static struct platform_device *platform_devs[] __initdata = { - &i2c_controller0, - &i2c_controller1, - &i2c_controller2, - &i2c_controller3, -}; - -static void __init u8500_timer_init(void) -{ -#ifdef CONFIG_LOCAL_TIMERS - /* Setup the local timer base */ - twd_base = __io_address(U8500_TWD_BASE); -#endif - /* Setup the MTU base */ - mtu_base = __io_address(U8500_MTU0_BASE); - - nmdk_timer_init(); -} - -static struct sys_timer u8500_timer = { - .init = u8500_timer_init, + &u8500_i2c0_device, + &ux500_i2c1_device, + &ux500_i2c2_device, + &ux500_i2c3_device, }; static void __init u8500_init_machine(void) { int i; + u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data; + ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data; + ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data; + ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data; + + u8500_ssp0_device.dev.platform_data = &ssp0_platform_data; + /* Register the active AMBA devices on this board */ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) amba_device_register(amba_devs[i], &iomem_resource); @@ -239,8 +143,8 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .io_pg_offst = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc, .boot_params = 0x100, .map_io = u8500_map_io, - .init_irq = u8500_init_irq, + .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ - .timer = &u8500_timer, + .timer = &ux500_timer, .init_machine = u8500_init_machine, MACHINE_END diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c new file mode 100644 index 000000000000..4430e69cf538 --- /dev/null +++ b/arch/arm/mach-ux500/board-u5500.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/hardware.h> +#include <mach/devices.h> +#include <mach/setup.h> + +static struct amba_device *amba_board_devs[] __initdata = { + &ux500_uart0_device, + &ux500_uart1_device, + &ux500_uart2_device, +}; + +static void __init u5500_init_machine(void) +{ + u5500_init_devices(); + + amba_add_devices(amba_board_devs, ARRAY_SIZE(amba_board_devs)); +} + +MACHINE_START(U8500, "ST-Ericsson U5500 Platform") + .phys_io = UX500_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(UX500_UART0_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = u5500_map_io, + .init_irq = ux500_init_irq, + .timer = &ux500_timer, + .init_machine = u5500_init_machine, +MACHINE_END diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 8359a73d0041..1b2c9890e8b4 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2009 ST-Ericsson - * heavily based on realview platform + * Copyright (C) 2009 STMicroelectronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,33 +12,130 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/mutex.h> +#include <linux/io.h> #include <asm/clkdev.h> -/* currently the clk structure - * just supports rate. This would - * be extended as and when new devices are - * added - TODO - */ -struct clk { - unsigned long rate; -}; +#include <mach/hardware.h> +#include "clock.h" + +#define PRCC_PCKEN 0x00 +#define PRCC_PCKDIS 0x04 +#define PRCC_KCKEN 0x08 +#define PRCC_KCKDIS 0x0C + +#define PRCM_YYCLKEN0_MGT_SET 0x510 +#define PRCM_YYCLKEN1_MGT_SET 0x514 +#define PRCM_YYCLKEN0_MGT_CLR 0x518 +#define PRCM_YYCLKEN1_MGT_CLR 0x51C +#define PRCM_YYCLKEN0_MGT_VAL 0x520 +#define PRCM_YYCLKEN1_MGT_VAL 0x524 + +#define PRCM_SVAMMDSPCLK_MGT 0x008 +#define PRCM_SIAMMDSPCLK_MGT 0x00C +#define PRCM_SGACLK_MGT 0x014 +#define PRCM_UARTCLK_MGT 0x018 +#define PRCM_MSP02CLK_MGT 0x01C +#define PRCM_MSP1CLK_MGT 0x288 +#define PRCM_I2CCLK_MGT 0x020 +#define PRCM_SDMMCCLK_MGT 0x024 +#define PRCM_SLIMCLK_MGT 0x028 +#define PRCM_PER1CLK_MGT 0x02C +#define PRCM_PER2CLK_MGT 0x030 +#define PRCM_PER3CLK_MGT 0x034 +#define PRCM_PER5CLK_MGT 0x038 +#define PRCM_PER6CLK_MGT 0x03C +#define PRCM_PER7CLK_MGT 0x040 +#define PRCM_LCDCLK_MGT 0x044 +#define PRCM_BMLCLK_MGT 0x04C +#define PRCM_HSITXCLK_MGT 0x050 +#define PRCM_HSIRXCLK_MGT 0x054 +#define PRCM_HDMICLK_MGT 0x058 +#define PRCM_APEATCLK_MGT 0x05C +#define PRCM_APETRACECLK_MGT 0x060 +#define PRCM_MCDECLK_MGT 0x064 +#define PRCM_IPI2CCLK_MGT 0x068 +#define PRCM_DSIALTCLK_MGT 0x06C +#define PRCM_DMACLK_MGT 0x074 +#define PRCM_B2R2CLK_MGT 0x078 +#define PRCM_TVCLK_MGT 0x07C +#define PRCM_UNIPROCLK_MGT 0x278 +#define PRCM_SSPCLK_MGT 0x280 +#define PRCM_RNGCLK_MGT 0x284 +#define PRCM_UICCCLK_MGT 0x27C + +#define PRCM_MGT_ENABLE (1 << 8) + +static DEFINE_SPINLOCK(clocks_lock); + +static void __clk_enable(struct clk *clk) +{ + if (clk->enabled++ == 0) { + if (clk->parent_cluster) + __clk_enable(clk->parent_cluster); + + if (clk->parent_periph) + __clk_enable(clk->parent_periph); + + if (clk->ops && clk->ops->enable) + clk->ops->enable(clk); + } +} int clk_enable(struct clk *clk) { + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; } EXPORT_SYMBOL(clk_enable); +static void __clk_disable(struct clk *clk) +{ + if (--clk->enabled == 0) { + if (clk->ops && clk->ops->disable) + clk->ops->disable(clk); + + if (clk->parent_periph) + __clk_disable(clk->parent_periph); + + if (clk->parent_cluster) + __clk_disable(clk->parent_cluster); + } +} + void clk_disable(struct clk *clk) { + unsigned long flags; + + WARN_ON(!clk->enabled); + + spin_lock_irqsave(&clocks_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { - return clk->rate; + unsigned long rate; + + if (clk->ops && clk->ops->get_rate) + return clk->ops->get_rate(clk); + + rate = clk->rate; + if (!rate) { + if (clk->parent_periph) + rate = clk_get_rate(clk->parent_periph); + else if (clk->parent_cluster) + rate = clk_get_rate(clk->parent_cluster); + } + + return rate; } EXPORT_SYMBOL(clk_get_rate); @@ -56,37 +153,373 @@ int clk_set_rate(struct clk *clk, unsigned long rate) } EXPORT_SYMBOL(clk_set_rate); -/* ssp clock */ -static struct clk ssp_clk = { - .rate = 48000000, +static void clk_prcmu_enable(struct clk *clk) +{ + void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE) + + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off; + + writel(1 << clk->prcmu_cg_bit, cg_set_reg); +} + +static void clk_prcmu_disable(struct clk *clk) +{ + void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE) + + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off; + + writel(1 << clk->prcmu_cg_bit, cg_clr_reg); +} + +/* ED doesn't have the combined set/clr registers */ +static void clk_prcmu_ed_enable(struct clk *clk) +{ + void __iomem *addr = __io_address(U8500_PRCMU_BASE) + + clk->prcmu_cg_mgt; + + writel(readl(addr) | PRCM_MGT_ENABLE, addr); +} + +static void clk_prcmu_ed_disable(struct clk *clk) +{ + void __iomem *addr = __io_address(U8500_PRCMU_BASE) + + clk->prcmu_cg_mgt; + + writel(readl(addr) & ~PRCM_MGT_ENABLE, addr); +} + +static struct clkops clk_prcmu_ops = { + .enable = clk_prcmu_enable, + .disable = clk_prcmu_disable, }; -/* fixed clock */ -static struct clk f38_clk = { - .rate = 38400000, +static unsigned int clkrst_base[] = { + [1] = U8500_CLKRST1_BASE, + [2] = U8500_CLKRST2_BASE, + [3] = U8500_CLKRST3_BASE, + [5] = U8500_CLKRST5_BASE, + [6] = U8500_CLKRST6_BASE, + [7] = U8500_CLKRST7_BASE_ED, }; -static struct clk_lookup lookups[] = { - { - /* UART0 */ - .dev_id = "uart0", - .clk = &f38_clk, - }, { /* UART1 */ - .dev_id = "uart1", - .clk = &f38_clk, - }, { /* UART2 */ - .dev_id = "uart2", - .clk = &f38_clk, - }, { /* SSP */ - .dev_id = "pl022", - .clk = &ssp_clk, - } +static void clk_prcc_enable(struct clk *clk) +{ + void __iomem *addr = __io_address(clkrst_base[clk->cluster]); + + if (clk->prcc_kernel != -1) + writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN); + + if (clk->prcc_bus != -1) + writel(1 << clk->prcc_bus, addr + PRCC_PCKEN); +} + +static void clk_prcc_disable(struct clk *clk) +{ + void __iomem *addr = __io_address(clkrst_base[clk->cluster]); + + if (clk->prcc_bus != -1) + writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS); + + if (clk->prcc_kernel != -1) + writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS); +} + +static struct clkops clk_prcc_ops = { + .enable = clk_prcc_enable, + .disable = clk_prcc_disable, +}; + +static struct clk clk_32khz = { + .rate = 32000, +}; + +/* + * PRCMU level clock gating + */ + +/* Bank 0 */ +static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK); +static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK); +static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK); +static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000); +static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK); +static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */ +static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000); +static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 50000000); +static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK); +static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK); +static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK); +static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK); +static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK); +static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000); +static DEFINE_PRCMU_CLK_RATE(per7clk, 0x0, 16, PER7CLK, 100000000); +static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK); +static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK); +static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK); +static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK); +static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK); +static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK); +static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK); +static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK); +static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK); +static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */ +static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK); +static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK); +static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK); +static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */ +static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */ + +/* Bank 1 */ +static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */ +static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */ + +/* + * PRCC level clock gating + * Format: per#, clk, PCKEN bit, KCKEN bit, parent + */ + +/* Peripheral Cluster #1 */ +static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL); +static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk); +static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL); +static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL); +static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk); +static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk); +static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk); +static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk); +static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk); + +/* Peripheral Cluster #2 */ + +static DEFINE_PRCC_CLK(2, gpio1_ed, 12, -1, NULL); +static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL); +static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL); +static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL); +static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk); +static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, pwl_ed, 3, 1, NULL); +static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL); +static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL); +static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk); + +static DEFINE_PRCC_CLK(2, gpio1_v1, 11, -1, NULL); +static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL); +static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL); +static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL); +static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk); +static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, pwl_v1, 3, 1, NULL); +static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL); +static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL); +static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk); + +/* Peripheral Cluster #3 */ +static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL); +static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk); +static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz); +static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk); +static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk); +static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL); + +/* Peripheral Cluster #4 is in the always on domain */ + +/* Peripheral Cluster #5 */ +static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL); +static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL); + +/* Peripheral Cluster #6 */ + +static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL); +static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL); +static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL); +static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL); +static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL); +static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk); +static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL); +static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL); +static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL); +static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL); +static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk); + +/* Peripheral Cluster #7 */ + +static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL); +static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL); +static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL); +static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL); +static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL); + +static struct clk_lookup u8500_common_clks[] = { + /* Peripheral Cluster #1 */ + CLK(gpio0, "gpio.0", NULL), + CLK(gpio0, "gpio.1", NULL), + CLK(slimbus0, "slimbus0", NULL), + CLK(i2c2, "nmk-i2c.2", NULL), + CLK(sdi0, "sdi0", NULL), + CLK(msp0, "msp0", NULL), + CLK(i2c1, "nmk-i2c.1", NULL), + CLK(uart1, "uart1", NULL), + CLK(uart0, "uart0", NULL), + + /* Peripheral Cluster #3 */ + CLK(gpio2, "gpio.2", NULL), + CLK(gpio2, "gpio.3", NULL), + CLK(gpio2, "gpio.4", NULL), + CLK(gpio2, "gpio.5", NULL), + CLK(sdi5, "sdi5", NULL), + CLK(uart2, "uart2", NULL), + CLK(ske, "ske", NULL), + CLK(sdi2, "sdi2", NULL), + CLK(i2c0, "nmk-i2c.0", NULL), + CLK(fsmc, "fsmc", NULL), + + /* Peripheral Cluster #5 */ + CLK(gpio3, "gpio.8", NULL), + + /* Peripheral Cluster #6 */ + CLK(hash1, "hash1", NULL), + CLK(pka, "pka", NULL), + CLK(hash0, "hash0", NULL), + CLK(cryp0, "cryp0", NULL), + + /* PRCMU level clock gating */ + + /* Bank 0 */ + CLK(svaclk, "sva", NULL), + CLK(siaclk, "sia", NULL), + CLK(sgaclk, "sga", NULL), + CLK(slimclk, "slim", NULL), + CLK(lcdclk, "lcd", NULL), + CLK(bmlclk, "bml", NULL), + CLK(hsitxclk, "stm-hsi.0", NULL), + CLK(hsirxclk, "stm-hsi.1", NULL), + CLK(hdmiclk, "hdmi", NULL), + CLK(apeatclk, "apeat", NULL), + CLK(apetraceclk, "apetrace", NULL), + CLK(mcdeclk, "mcde", NULL), + CLK(ipi2clk, "ipi2", NULL), + CLK(dmaclk, "dma40", NULL), + CLK(b2r2clk, "b2r2", NULL), + CLK(tvclk, "tv", NULL), +}; + +static struct clk_lookup u8500_ed_clks[] = { + /* Peripheral Cluster #1 */ + CLK(spi3_ed, "spi3", NULL), + CLK(msp1_ed, "msp1", NULL), + + /* Peripheral Cluster #2 */ + CLK(gpio1_ed, "gpio.6", NULL), + CLK(gpio1_ed, "gpio.7", NULL), + CLK(ssitx_ed, "ssitx", NULL), + CLK(ssirx_ed, "ssirx", NULL), + CLK(spi0_ed, "spi0", NULL), + CLK(sdi3_ed, "sdi3", NULL), + CLK(sdi1_ed, "sdi1", NULL), + CLK(msp2_ed, "msp2", NULL), + CLK(sdi4_ed, "sdi4", NULL), + CLK(pwl_ed, "pwl", NULL), + CLK(spi1_ed, "spi1", NULL), + CLK(spi2_ed, "spi2", NULL), + CLK(i2c3_ed, "nmk-i2c.3", NULL), + + /* Peripheral Cluster #3 */ + CLK(ssp1_ed, "ssp1", NULL), + CLK(ssp0_ed, "ssp0", NULL), + + /* Peripheral Cluster #5 */ + CLK(usb_ed, "musb_hdrc.0", "usb"), + + /* Peripheral Cluster #6 */ + CLK(dmc_ed, "dmc", NULL), + CLK(cryp1_ed, "cryp1", NULL), + CLK(rng_ed, "rng", NULL), + + /* Peripheral Cluster #7 */ + CLK(tzpc0_ed, "tzpc0", NULL), + CLK(mtu1_ed, "mtu1", NULL), + CLK(mtu0_ed, "mtu0", NULL), + CLK(wdg_ed, "wdg", NULL), + CLK(cfgreg_ed, "cfgreg", NULL), +}; + +static struct clk_lookup u8500_v1_clks[] = { + /* Peripheral Cluster #1 */ + CLK(i2c4, "nmk-i2c.4", NULL), + CLK(spi3_v1, "spi3", NULL), + CLK(msp1_v1, "msp1", NULL), + + /* Peripheral Cluster #2 */ + CLK(gpio1_v1, "gpio.6", NULL), + CLK(gpio1_v1, "gpio.7", NULL), + CLK(ssitx_v1, "ssitx", NULL), + CLK(ssirx_v1, "ssirx", NULL), + CLK(spi0_v1, "spi0", NULL), + CLK(sdi3_v1, "sdi3", NULL), + CLK(sdi1_v1, "sdi1", NULL), + CLK(msp2_v1, "msp2", NULL), + CLK(sdi4_v1, "sdi4", NULL), + CLK(pwl_v1, "pwl", NULL), + CLK(spi1_v1, "spi1", NULL), + CLK(spi2_v1, "spi2", NULL), + CLK(i2c3_v1, "nmk-i2c.3", NULL), + + /* Peripheral Cluster #3 */ + CLK(ssp1_v1, "ssp1", NULL), + CLK(ssp0_v1, "ssp0", NULL), + + /* Peripheral Cluster #5 */ + CLK(usb_v1, "musb_hdrc.0", "usb"), + + /* Peripheral Cluster #6 */ + CLK(mtu1_v1, "mtu1", NULL), + CLK(mtu0_v1, "mtu0", NULL), + CLK(cfgreg_v1, "cfgreg", NULL), + CLK(hash1, "hash1", NULL), + CLK(unipro_v1, "unipro", NULL), + CLK(rng_v1, "rng", NULL), + + /* PRCMU level clock gating */ + + /* Bank 0 */ + CLK(uniproclk, "uniproclk", NULL), + CLK(dsialtclk, "dsialt", NULL), + + /* Bank 1 */ + CLK(rngclk, "rng", NULL), + CLK(uiccclk, "uicc", NULL), }; static int __init clk_init(void) { - /* register the clock lookups */ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + if (cpu_is_u8500ed()) { + clk_prcmu_ops.enable = clk_prcmu_ed_enable; + clk_prcmu_ops.disable = clk_prcmu_ed_disable; + } else if (cpu_is_u5500()) { + /* Clock tree for U5500 not implemented yet */ + clk_prcc_ops.enable = clk_prcc_ops.disable = NULL; + clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL; + } + + clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); + if (cpu_is_u8500ed()) + clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks)); + else + clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); + return 0; } arch_initcall(clk_init); diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h new file mode 100644 index 000000000000..e4f99b65026f --- /dev/null +++ b/arch/arm/mach-ux500/clock.h @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2010 ST-Ericsson + * Copyright (C) 2009 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/** + * struct clkops - ux500 clock operations + * @enable: function to enable the clock + * @disable: function to disable the clock + * @get_rate: function to get the current clock rate + * + * This structure contains function pointers to functions that will be used to + * control the clock. All of these functions are optional. If get_rate is + * NULL, the rate in the struct clk will be used. + */ +struct clkops { + void (*enable) (struct clk *); + void (*disable) (struct clk *); + unsigned long (*get_rate) (struct clk *); +}; + +/** + * struct clk - ux500 clock structure + * @ops: pointer to clkops struct used to control this clock + * @name: name, for debugging + * @enabled: refcount. positive if enabled, zero if disabled + * @rate: fixed rate for clocks which don't implement + * ops->getrate + * @prcmu_cg_off: address offset of the combined enable/disable register + * (used on u8500v1) + * @prcmu_cg_bit: bit in the combined enable/disable register (used on + * u8500v1) + * @prcmu_cg_mgt: address of the enable/disable register (used on + * u8500ed) + * @cluster: peripheral cluster number + * @prcc_bus: bit for the bus clock in the peripheral's CLKRST + * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST. + * -1 if no kernel clock exists. + * @parent_cluster: pointer to parent's cluster clk struct + * @parent_periph: pointer to parent's peripheral clk struct + * + * Peripherals are organised into clusters, and each cluster has an associated + * bus clock. Some peripherals also have a parent peripheral clock. + * + * In order to enable a clock for a peripheral, we need to enable: + * (1) the parent cluster (bus) clock at the PRCMU level + * (2) the parent peripheral clock (if any) at the PRCMU level + * (3) the peripheral's bus & kernel clock at the PRCC level + * + * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each + * of the cluster and peripheral clocks, and hooking these as the parents of + * the individual peripheral clocks. + * + * (3) is handled by specifying the bits in the PRCC control registers required + * to enable these clocks and modifying them in the ->enable and + * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK). + * + * This structure describes both the PRCMU-level clocks and PRCC-level clocks. + * The prcmu_* fields are only used for the PRCMU clocks, and the cluster, + * prcc, and parent pointers are only used for the PRCC-level clocks. + */ +struct clk { + const struct clkops *ops; + const char *name; + unsigned int enabled; + + unsigned long rate; + struct list_head list; + + /* These three are only for PRCMU clks */ + + unsigned int prcmu_cg_off; + unsigned int prcmu_cg_bit; + unsigned int prcmu_cg_mgt; + + /* The rest are only for PRCC clks */ + + int cluster; + unsigned int prcc_bus; + unsigned int prcc_kernel; + + struct clk *parent_cluster; + struct clk *parent_periph; +}; + +#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcmu_ops, \ + .prcmu_cg_off = _cg_off, \ + .prcmu_cg_bit = _cg_bit, \ + .prcmu_cg_mgt = PRCM_##_reg##_MGT \ + } + +#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcmu_ops, \ + .prcmu_cg_off = _cg_off, \ + .prcmu_cg_bit = _cg_bit, \ + .rate = _rate, \ + .prcmu_cg_mgt = PRCM_##_reg##_MGT \ + } + +#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \ +struct clk clk_##_name = { \ + .name = #_name, \ + .ops = &clk_prcc_ops, \ + .cluster = _pclust, \ + .prcc_bus = _bus_en, \ + .prcc_kernel = _kernel_en, \ + .parent_cluster = &clk_per##_pclust##clk, \ + .parent_periph = _kernclk \ + } + +#define CLK(_clk, _devname, _conname) \ + { \ + .clk = &clk_##_clk, \ + .dev_id = _devname, \ + .con_id = _conname, \ + } diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c new file mode 100644 index 000000000000..6a3ac4539f16 --- /dev/null +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/io.h> + +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/devices.h> +#include <mach/setup.h> + +static struct map_desc u5500_io_desc[] __initdata = { + __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K), + __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K), +}; + +static struct platform_device *u5500_platform_devs[] __initdata = { + &u5500_gpio_devs[0], + &u5500_gpio_devs[1], + &u5500_gpio_devs[2], + &u5500_gpio_devs[3], + &u5500_gpio_devs[4], + &u5500_gpio_devs[5], + &u5500_gpio_devs[6], + &u5500_gpio_devs[7], +}; + +void __init u5500_map_io(void) +{ + ux500_map_io(); + + iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc)); +} + +void __init u5500_init_devices(void) +{ + ux500_init_devices(); + + platform_add_devices(u5500_platform_devs, + ARRAY_SIZE(u5500_platform_devs)); +} diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 397bc1f9ed94..d04299f3b6b5 100644 --- a/arch/arm/mach-ux500/cpu-u8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -13,44 +13,55 @@ #include <linux/device.h> #include <linux/amba/bus.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <linux/platform_device.h> +#include <linux/io.h> -#include <asm/hardware/gic.h> #include <asm/mach/map.h> #include <mach/hardware.h> +#include <mach/setup.h> +#include <mach/devices.h> -/* add any platform devices here - TODO */ static struct platform_device *platform_devs[] __initdata = { - /* yet to be added, add i2c0, gpio.. */ + &u8500_gpio_devs[0], + &u8500_gpio_devs[1], + &u8500_gpio_devs[2], + &u8500_gpio_devs[3], + &u8500_gpio_devs[4], + &u8500_gpio_devs[5], + &u8500_gpio_devs[6], + &u8500_gpio_devs[7], + &u8500_gpio_devs[8], }; -#define __IO_DEV_DESC(x, sz) { \ - .virtual = IO_ADDRESS(x), \ - .pfn = __phys_to_pfn(x), \ - .length = sz, \ - .type = MT_DEVICE, \ -} - /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_io_desc[] __initdata = { - __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K), - __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K), - __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), +}; + +static struct map_desc u8500ed_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K), +}; + +static struct map_desc u8500v1_io_desc[] __initdata = { __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K), - __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), - __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), }; void __init u8500_map_io(void) { + ux500_map_io(); + iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); -} -void __init u8500_init_irq(void) -{ - gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29); - gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE)); + if (cpu_is_u8500ed()) + iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc)); + else + iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc)); } /* @@ -58,6 +69,8 @@ void __init u8500_init_irq(void) */ void __init u8500_init_devices(void) { + ux500_init_devices(); + /* Register the platform devices */ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c new file mode 100644 index 000000000000..d81ad023963c --- /dev/null +++ b/arch/arm/mach-ux500/cpu.c @@ -0,0 +1,99 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/io.h> +#include <linux/clk.h> + +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> +#include <asm/mach/map.h> +#include <asm/localtimer.h> + +#include <plat/mtu.h> +#include <mach/hardware.h> +#include <mach/setup.h> +#include <mach/devices.h> + +#include "clock.h" + +static struct map_desc ux500_io_desc[] __initdata = { + __IO_DEV_DESC(UX500_UART0_BASE, SZ_4K), + __IO_DEV_DESC(UX500_UART2_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K), + __IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K), + __IO_DEV_DESC(UX500_TWD_BASE, SZ_4K), + __IO_DEV_DESC(UX500_SCU_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K), + __IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K), + + __IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K), +}; + +static struct amba_device *ux500_amba_devs[] __initdata = { + &ux500_pl031_device, +}; + +void __init ux500_map_io(void) +{ + iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc)); +} + +void __init ux500_init_devices(void) +{ + amba_add_devices(ux500_amba_devs, ARRAY_SIZE(ux500_amba_devs)); +} + +void __init ux500_init_irq(void) +{ + gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29); + gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE)); +} + +#ifdef CONFIG_CACHE_L2X0 +static int ux500_l2x0_init(void) +{ + void __iomem *l2x0_base; + + l2x0_base = __io_address(UX500_L2CC_BASE); + + /* 64KB way size, 8 way associativity, force WA */ + l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); + + return 0; +} +early_initcall(ux500_l2x0_init); +#endif + +static void __init ux500_timer_init(void) +{ +#ifdef CONFIG_LOCAL_TIMERS + /* Setup the local timer base */ + twd_base = __io_address(UX500_TWD_BASE); +#endif + /* Setup the MTU base */ + if (cpu_is_u8500ed()) + mtu_base = __io_address(U8500_MTU0_BASE_ED); + else + mtu_base = __io_address(UX500_MTU0_BASE); + + nmdk_timer_init(); +} + +struct sys_timer ux500_timer = { + .init = ux500_timer_init, +}; diff --git a/arch/arm/mach-ux500/devices-db5500.c b/arch/arm/mach-ux500/devices-db5500.c new file mode 100644 index 000000000000..33e5b56bebb6 --- /dev/null +++ b/arch/arm/mach-ux500/devices-db5500.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> + +#include <mach/hardware.h> +#include <mach/devices.h> + +static struct nmk_gpio_platform_data u5500_gpio_data[] = { + GPIO_DATA("GPIO-0-31", 0), + GPIO_DATA("GPIO-32-63", 32), /* 36..63 not routed to pin */ + GPIO_DATA("GPIO-64-95", 64), /* 83..95 not routed to pin */ + GPIO_DATA("GPIO-96-127", 96), /* 102..127 not routed to pin */ + GPIO_DATA("GPIO-128-159", 128), /* 149..159 not routed to pin */ + GPIO_DATA("GPIO-160-191", 160), + GPIO_DATA("GPIO-192-223", 192), + GPIO_DATA("GPIO-224-255", 224), /* 228..255 not routed to pin */ +}; + +static struct resource u5500_gpio_resources[] = { + GPIO_RESOURCE(0), + GPIO_RESOURCE(1), + GPIO_RESOURCE(2), + GPIO_RESOURCE(3), + GPIO_RESOURCE(4), + GPIO_RESOURCE(5), + GPIO_RESOURCE(6), + GPIO_RESOURCE(7), +}; + +struct platform_device u5500_gpio_devs[] = { + GPIO_DEVICE(0), + GPIO_DEVICE(1), + GPIO_DEVICE(2), + GPIO_DEVICE(3), + GPIO_DEVICE(4), + GPIO_DEVICE(5), + GPIO_DEVICE(6), + GPIO_DEVICE(7), +}; diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c new file mode 100644 index 000000000000..20334236afce --- /dev/null +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/amba/bus.h> + +#include <mach/hardware.h> +#include <mach/setup.h> + +static struct nmk_gpio_platform_data u8500_gpio_data[] = { + GPIO_DATA("GPIO-0-31", 0), + GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */ + GPIO_DATA("GPIO-64-95", 64), + GPIO_DATA("GPIO-96-127", 96), /* 98..127 not routed to pin */ + GPIO_DATA("GPIO-128-159", 128), + GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */ + GPIO_DATA("GPIO-192-223", 192), + GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */ + GPIO_DATA("GPIO-256-288", 256), /* 268..288 not routed to pin */ +}; + +static struct resource u8500_gpio_resources[] = { + GPIO_RESOURCE(0), + GPIO_RESOURCE(1), + GPIO_RESOURCE(2), + GPIO_RESOURCE(3), + GPIO_RESOURCE(4), + GPIO_RESOURCE(5), + GPIO_RESOURCE(6), + GPIO_RESOURCE(7), + GPIO_RESOURCE(8), +}; + +struct platform_device u8500_gpio_devs[] = { + GPIO_DEVICE(0), + GPIO_DEVICE(1), + GPIO_DEVICE(2), + GPIO_DEVICE(3), + GPIO_DEVICE(4), + GPIO_DEVICE(5), + GPIO_DEVICE(6), + GPIO_DEVICE(7), + GPIO_DEVICE(8), +}; + +struct amba_device u8500_ssp0_device = { + .dev = { + .coherent_dma_mask = ~0, + .init_name = "ssp0", + }, + .res = { + .start = U8500_SSP0_BASE, + .end = U8500_SSP0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_SSP0, NO_IRQ }, + /* ST-Ericsson modified id */ + .periphid = SSP_PER_ID, +}; + +static struct resource u8500_i2c0_resources[] = { + [0] = { + .start = U8500_I2C0_BASE, + .end = U8500_I2C0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_I2C0, + .end = IRQ_I2C0, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device u8500_i2c0_device = { + .name = "nmk-i2c", + .id = 0, + .resource = u8500_i2c0_resources, + .num_resources = ARRAY_SIZE(u8500_i2c0_resources), +}; + +static struct resource u8500_i2c4_resources[] = { + [0] = { + .start = U8500_I2C4_BASE, + .end = U8500_I2C4_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_I2C4, + .end = IRQ_I2C4, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device u8500_i2c4_device = { + .name = "nmk-i2c", + .id = 4, + .resource = u8500_i2c4_resources, + .num_resources = ARRAY_SIZE(u8500_i2c4_resources), +}; diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c new file mode 100644 index 000000000000..8a268893cb7f --- /dev/null +++ b/arch/arm/mach-ux500/devices.c @@ -0,0 +1,88 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/amba/bus.h> + +#include <mach/hardware.h> +#include <mach/setup.h> + +#define __MEM_4K_RESOURCE(x) \ + .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} + +struct amba_device ux500_pl031_device = { + .dev = { + .init_name = "pl031", + }, + .res = { + .start = UX500_RTC_BASE, + .end = UX500_RTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_RTC_RTT, NO_IRQ}, +}; + +struct amba_device ux500_uart0_device = { + .dev = { .init_name = "uart0" }, + __MEM_4K_RESOURCE(UX500_UART0_BASE), + .irq = {IRQ_UART0, NO_IRQ}, +}; + +struct amba_device ux500_uart1_device = { + .dev = { .init_name = "uart1" }, + __MEM_4K_RESOURCE(UX500_UART1_BASE), + .irq = {IRQ_UART1, NO_IRQ}, +}; + +struct amba_device ux500_uart2_device = { + .dev = { .init_name = "uart2" }, + __MEM_4K_RESOURCE(UX500_UART2_BASE), + .irq = {IRQ_UART2, NO_IRQ}, +}; + +#define UX500_I2C_RESOURCES(id, size) \ +static struct resource ux500_i2c##id##_resources[] = { \ + [0] = { \ + .start = UX500_I2C##id##_BASE, \ + .end = UX500_I2C##id##_BASE + size - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + [1] = { \ + .start = IRQ_I2C##id, \ + .end = IRQ_I2C##id, \ + .flags = IORESOURCE_IRQ \ + } \ +} + +UX500_I2C_RESOURCES(1, SZ_4K); +UX500_I2C_RESOURCES(2, SZ_4K); +UX500_I2C_RESOURCES(3, SZ_4K); + +#define UX500_I2C_PDEVICE(cid) \ +struct platform_device ux500_i2c##cid##_device = { \ + .name = "nmk-i2c", \ + .id = cid, \ + .num_resources = 2, \ + .resource = ux500_i2c##cid##_resources, \ +} + +UX500_I2C_PDEVICE(1); +UX500_I2C_PDEVICE(2); +UX500_I2C_PDEVICE(3); + +void __init amba_add_devices(struct amba_device *devs[], int num) +{ + int i; + + for (i = 0; i < num; i++) { + struct amba_device *d = devs[i]; + amba_device_register(d, &iomem_resource); + } +} diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h new file mode 100644 index 000000000000..545c80fc8024 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_DB5500_REGS_H +#define __MACH_DB5500_REGS_H + +#define U5500_PER1_BASE 0xA0020000 +#define U5500_PER2_BASE 0xA0010000 +#define U5500_PER3_BASE 0x80140000 +#define U5500_PER4_BASE 0x80150000 +#define U5500_PER5_BASE 0x80100000 +#define U5500_PER6_BASE 0x80120000 + +#define U5500_GIC_DIST_BASE 0xA0411000 +#define U5500_GIC_CPU_BASE 0xA0410100 +#define U5500_DMA_BASE 0x90030000 +#define U5500_MCDE_BASE 0xA0400000 +#define U5500_MODEM_BASE 0xB0000000 +#define U5500_L2CC_BASE 0xA0412000 +#define U5500_SCU_BASE 0xA0410000 +#define U5500_DSI1_BASE 0xA0401000 +#define U5500_DSI2_BASE 0xA0402000 +#define U5500_SIA_BASE 0xA0100000 +#define U5500_SVA_BASE 0x80200000 +#define U5500_HSEM_BASE 0xA0000000 +#define U5500_NAND0_BASE 0x60000000 +#define U5500_NAND1_BASE 0x70000000 +#define U5500_TWD_BASE 0xa0410600 +#define U5500_B2R2_BASE 0xa0200000 + +#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000) +#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000) +#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000) +#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000) +#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000) +#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000) +#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000) +#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000) + +#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000) +#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000) +#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000) + +#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000) +#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000) +#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000) +#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000) + +#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000) +#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000) +#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000) +#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000) +#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000) +#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000) +#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000) +#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000) +#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) +#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) +#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) + +#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) +#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) +#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000) +#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000) +#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000) +#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000) +#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000) +#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000) +#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000) +#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000) +#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000) +#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000) +#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000) +#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000) +#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000) +#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000) +#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000) + +#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000) +#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000) +#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000) +#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000) +#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5000) +#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000) +#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000) +#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000) +#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000) +#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000) +#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000) + +#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE +#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80) +#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE +#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE +#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE +#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE +#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80) +#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h new file mode 100644 index 000000000000..9169e1e382a3 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_DB8500_REGS_H +#define __MACH_DB8500_REGS_H + +#define U8500_PER3_BASE 0x80000000 +#define U8500_STM_BASE 0x80100000 +#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000) +#define U8500_PER2_BASE 0x80110000 +#define U8500_PER1_BASE 0x80120000 +#define U8500_B2R2_BASE 0x80130000 +#define U8500_HSEM_BASE 0x80140000 +#define U8500_PER4_BASE 0x80150000 +#define U8500_ICN_BASE 0x81000000 + +#define U8500_BOOT_ROM_BASE 0x90000000 +/* ASIC ID is at 0xff4 offset within this region */ +#define U8500_ASIC_ID_BASE 0x9001F000 + +#define U8500_PER6_BASE 0xa03c0000 +#define U8500_PER5_BASE 0xa03e0000 +#define U8500_PER7_BASE_ED 0xa03d0000 + +#define U8500_SVA_BASE 0xa0100000 +#define U8500_SIA_BASE 0xa0200000 + +#define U8500_SGA_BASE 0xa0300000 +#define U8500_MCDE_BASE 0xa0350000 +#define U8500_DMA_BASE_ED 0xa0362000 +#define U8500_DMA_BASE 0x801C0000 /* v1 */ + +#define U8500_SBAG_BASE 0xa0390000 + +#define U8500_SCU_BASE 0xa0410000 +#define U8500_GIC_CPU_BASE 0xa0410100 +#define U8500_TWD_BASE 0xa0410600 +#define U8500_GIC_DIST_BASE 0xa0411000 +#define U8500_L2CC_BASE 0xa0412000 + +#define U8500_MODEM_I2C 0xb7e02000 + +#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) +#define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000) +#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) +#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) + +/* per7 base addressess */ +#define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000) +#define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000) +#define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000) +#define U8500_TZPC0_BASE_ED (U8500_PER7_BASE_ED + 0xc000) +#define U8500_CLKRST7_BASE_ED (U8500_PER7_BASE_ED + 0xf000) + +#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) +#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) + +/* per6 base addressess */ +#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) +#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) +#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */ +#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */ +#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */ +#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) +#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) +#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) + +/* per5 base addressess */ +#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) +#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) + +/* per4 base addressess */ +#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) +#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) +#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) +#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000) +#define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000) +#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) +#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) +#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000) + +/* per3 base addresses */ +#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) +#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) +#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) +#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) +#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) +#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) +#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) +#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) +#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) + +/* per2 base addressess */ +#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) +#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) +#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) +#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) +#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) +#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) +#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) +#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) +#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) +#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) +#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) +#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) + +/* per1 base addresses */ +#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) +#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) +#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) +#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) +#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) +#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) +#define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000) +#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000) +#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) + +#define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040 + +#define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE +#define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80) +#define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE +#define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80) +#define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100) +#define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180) +#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE +#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) +#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE + +#endif diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index 09cbfda8aee5..c5203b7ea552 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -10,11 +10,19 @@ */ #include <mach/hardware.h> +#if CONFIG_UX500_DEBUG_UART > 2 +#error Invalid Ux500 debug UART +#endif + +#define __UX500_UART(n) UX500_UART##n##_BASE +#define UX500_UART(n) __UX500_UART(n) +#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) + .macro addruart, rx, tmp mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - ldreq \rx, =U8500_UART2_BASE @ no, physical address - ldrne \rx, =IO_ADDRESS(U8500_UART2_BASE) @ yes, virtual address + ldreq \rx, =UART_BASE @ no, physical address + ldrne \rx, =IO_ADDRESS(UART_BASE) @ yes, virtual address .endm #include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h new file mode 100644 index 000000000000..0422af00a56e --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __ASM_ARCH_DEVICES_H__ +#define __ASM_ARCH_DEVICES_H__ + +struct platform_device; +struct amba_device; + +extern struct platform_device u5500_gpio_devs[]; +extern struct platform_device u8500_gpio_devs[]; + +extern struct amba_device ux500_pl031_device; +extern struct amba_device u8500_ssp0_device; +extern struct amba_device ux500_uart0_device; +extern struct amba_device ux500_uart1_device; +extern struct amba_device ux500_uart2_device; + +extern struct platform_device ux500_i2c1_device; +extern struct platform_device ux500_i2c2_device; +extern struct platform_device ux500_i2c3_device; + +extern struct platform_device u8500_i2c0_device; +extern struct platform_device u8500_i2c4_device; + +#endif diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S index eece3301fef7..60ea88db8283 100644 --- a/arch/arm/mach-ux500/include/mach/entry-macro.S +++ b/arch/arm/mach-ux500/include/mach/entry-macro.S @@ -17,7 +17,7 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(U8500_GIC_CPU_BASE) + ldr \base, =IO_ADDRESS(UX500_GIC_CPU_BASE) .endm .macro arch_ret_to_user, tmp1, tmp2 diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h new file mode 100644 index 000000000000..d548a622e7d2 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/gpio.h @@ -0,0 +1,50 @@ +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H + +/* + * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough + * room for a couple of GPIO expanders. + */ +#define ARCH_NR_GPIOS 350 + +#include <plat/gpio.h> + +#define __GPIO_RESOURCE(soc, block) \ + { \ + .start = soc##_GPIOBANK##block##_BASE, \ + .end = soc##_GPIOBANK##block##_BASE + 127, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = IRQ_GPIO##block, \ + .end = IRQ_GPIO##block, \ + .flags = IORESOURCE_IRQ, \ + } + +#define __GPIO_DEVICE(soc, block) \ + { \ + .name = "gpio", \ + .id = block, \ + .num_resources = 2, \ + .resource = &soc##_gpio_resources[block * 2], \ + .dev = { \ + .platform_data = &soc##_gpio_data[block], \ + }, \ + } + +#define GPIO_DATA(_name, first) \ + { \ + .name = _name, \ + .first_gpio = first, \ + .first_irq = NOMADIK_GPIO_TO_IRQ(first), \ + } + +#ifdef CONFIG_UX500_SOC_DB8500 +#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U8500, block) +#define GPIO_DEVICE(block) __GPIO_DEVICE(u8500, block) +#elif defined(CONFIG_UX500_SOC_DB5500) +#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U5500, block) +#define GPIO_DEVICE(block) __GPIO_DEVICE(u5500, block) +#endif + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 04ea836969b3..8656379a8309 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -23,109 +23,106 @@ /* typesafe io address */ #define __io_address(n) __io(IO_ADDRESS(n)) +/* used by some plat-nomadik code */ +#define io_p2v(n) __io_address(n) -/* - * Base address definitions for U8500 Onchip IPs. All the - * peripherals are contained in a single 1 Mbyte region, with - * AHB peripherals at the bottom and APB peripherals at the - * top of the region. PER stands for PERIPHERAL region which - * itself divided into sub regions. - */ -#define U8500_PER3_BASE 0x80000000 -#define U8500_PER2_BASE 0x80110000 -#define U8500_PER1_BASE 0x80120000 -#define U8500_PER4_BASE 0x80150000 - -#define U8500_PER6_BASE 0xa03c0000 -#define U8500_PER5_BASE 0xa03e0000 -#define U8500_PER7_BASE 0xa03d0000 - -#define U8500_SVA_BASE 0xa0100000 -#define U8500_SIA_BASE 0xa0200000 - -#define U8500_SGA_BASE 0xa0300000 -#define U8500_MCDE_BASE 0xa0350000 -#define U8500_DMA_BASE 0xa0362000 - -#define U8500_SCU_BASE 0xa0410000 -#define U8500_GIC_CPU_BASE 0xa0410100 -#define U8500_TWD_BASE 0xa0410600 -#define U8500_GIC_DIST_BASE 0xa0411000 -#define U8500_L2CC_BASE 0xa0412000 - -#define U8500_TWD_SIZE 0x100 - -/* per7 base addressess */ -#define U8500_CR_BASE (U8500_PER7_BASE + 0x8000) -#define U8500_MTU0_BASE (U8500_PER7_BASE + 0xa000) -#define U8500_MTU1_BASE (U8500_PER7_BASE + 0xb000) -#define U8500_TZPC0_BASE (U8500_PER7_BASE + 0xc000) -#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000) - -/* per6 base addressess */ -#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) -#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) -#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) -#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) -#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) -#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) - -/* per5 base addressess */ -#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) -#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000) -#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) - -/* per4 base addressess */ -#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000) -#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x1000) -#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x2000) -#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x3000) -#define U8500_RTC_BASE (U8500_PER4_BASE + 0x4000) -#define U8500_SCR_BASE (U8500_PER4_BASE + 0x5000) -#define U8500_DMC_BASE (U8500_PER4_BASE + 0x6000) -#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x7000) - -/* per3 base addressess */ -#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) -#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) -#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) -#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) -#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) -#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) -#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) -#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) -#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000) -#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) - -/* per2 base addressess */ -#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) -#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) -#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) -#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) -#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) -#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) -#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) -#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) -#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) -#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) -#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) -#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xe000) -#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) - -/* per1 base addresses */ -#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) -#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) -#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) -#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) -#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) -#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) -#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) -#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) -#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000) -#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000) -#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) +#include <mach/db8500-regs.h> +#include <mach/db5500-regs.h> + +#ifdef CONFIG_UX500_SOC_DB8500 +#define UX500(periph) U8500_##periph##_BASE +#elif defined(CONFIG_UX500_SOC_DB5500) +#define UX500(periph) U5500_##periph##_BASE +#endif + +#define UX500_BACKUPRAM0_BASE UX500(BACKUPRAM0) +#define UX500_BACKUPRAM1_BASE UX500(BACKUPRAM1) +#define UX500_B2R2_BASE UX500(B2R2) + +#define UX500_CLKRST1_BASE UX500(CLKRST1) +#define UX500_CLKRST2_BASE UX500(CLKRST2) +#define UX500_CLKRST3_BASE UX500(CLKRST3) +#define UX500_CLKRST5_BASE UX500(CLKRST5) +#define UX500_CLKRST6_BASE UX500(CLKRST6) + +#define UX500_DMA_BASE UX500(DMA) +#define UX500_FSMC_BASE UX500(FSMC) + +#define UX500_GIC_CPU_BASE UX500(GIC_CPU) +#define UX500_GIC_DIST_BASE UX500(GIC_DIST) + +#define UX500_I2C1_BASE UX500(I2C1) +#define UX500_I2C2_BASE UX500(I2C2) +#define UX500_I2C3_BASE UX500(I2C3) + +#define UX500_L2CC_BASE UX500(L2CC) +#define UX500_MCDE_BASE UX500(MCDE) +#define UX500_MTU0_BASE UX500(MTU0) +#define UX500_MTU1_BASE UX500(MTU1) +#define UX500_PRCMU_BASE UX500(PRCMU) + +#define UX500_RNG_BASE UX500(RNG) +#define UX500_RTC_BASE UX500(RTC) + +#define UX500_SCU_BASE UX500(SCU) + +#define UX500_SDI0_BASE UX500(SDI0) +#define UX500_SDI1_BASE UX500(SDI1) +#define UX500_SDI2_BASE UX500(SDI2) +#define UX500_SDI3_BASE UX500(SDI3) +#define UX500_SDI4_BASE UX500(SDI4) + +#define UX500_SPI0_BASE UX500(SPI0) +#define UX500_SPI1_BASE UX500(SPI1) +#define UX500_SPI2_BASE UX500(SPI2) +#define UX500_SPI3_BASE UX500(SPI3) + +#define UX500_SIA_BASE UX500(SIA) +#define UX500_SVA_BASE UX500(SVA) + +#define UX500_TWD_BASE UX500(TWD) + +#define UX500_UART0_BASE UX500(UART0) +#define UX500_UART1_BASE UX500(UART1) +#define UX500_UART2_BASE UX500(UART2) + +#define UX500_USBOTG_BASE UX500(USBOTG) /* ST-Ericsson modified pl022 id */ #define SSP_PER_ID 0x01080022 +#ifndef __ASSEMBLY__ + +#include <asm/cputype.h> + +static inline bool cpu_is_u8500(void) +{ +#ifdef CONFIG_UX500_SOC_DB8500 + return 1; +#else + return 0; +#endif +} + +static inline bool cpu_is_u8500ed(void) +{ + return cpu_is_u8500() && (read_cpuid_id() & 15) == 0; +} + +static inline bool cpu_is_u8500v1(void) +{ + return cpu_is_u8500() && (read_cpuid_id() & 15) == 1; +} + +static inline bool cpu_is_u5500(void) +{ +#ifdef CONFIG_UX500_SOC_DB5500 + return 1; +#else + return 0; +#endif +} + +#endif + #endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 394b5dd2200f..7970684b1d09 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -42,6 +42,7 @@ #define IRQ_AB4500 (IRQ_SHPI_START + 40) #define IRQ_DISP (IRQ_SHPI_START + 48) #define IRQ_SiPI3 (IRQ_SHPI_START + 49) +#define IRQ_I2C4 (IRQ_SHPI_START + 51) #define IRQ_SSP1 (IRQ_SHPI_START + 52) #define IRQ_I2C2 (IRQ_SHPI_START + 55) #define IRQ_SDMMC0 (IRQ_SHPI_START + 60) @@ -66,6 +67,12 @@ /* There are 128 shared peripheral interrupts assigned to * INTID[160:32]. The first 32 interrupts are reserved. */ -#define NR_IRQS 161 +#define U8500_SOC_NR_IRQS 161 + +/* After chip-specific IRQ numbers we have the GPIO ones */ +#define NOMADIK_NR_GPIO 288 +#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + U8500_SOC_NR_IRQS) +#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - U8500_SOC_NR_IRQS) +#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) #endif /*ASM_ARCH_IRQS_H*/ diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index cf0ce1687f24..e978dbd9e210 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -14,10 +14,28 @@ #include <asm/mach/time.h> #include <linux/init.h> -extern void u8500_map_io(void); -extern void u8500_init_devices(void); -extern void u8500_init_irq(void); +extern void __init ux500_map_io(void); +extern void __init u5500_map_io(void); +extern void __init u8500_map_io(void); + +extern void __init ux500_init_devices(void); +extern void __init u5500_init_devices(void); +extern void __init u8500_init_devices(void); + +extern void __init ux500_init_irq(void); /* We re-use nomadik_timer for this platform */ extern void nmdk_timer_init(void); +extern void __init amba_add_devices(struct amba_device *devs[], int num); + +struct sys_timer; +extern struct sys_timer ux500_timer; + +#define __IO_DEV_DESC(x, sz) { \ + .virtual = IO_ADDRESS(x), \ + .pfn = __phys_to_pfn(x), \ + .length = sz, \ + .type = MT_DEVICE, \ +} + #endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 8dfe7ca245d8..438ef16aec90 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -30,7 +30,7 @@ volatile int __cpuinitdata pen_release = -1; static unsigned int __init get_core_count(void) { - return scu_get_core_count(__io_address(U8500_SCU_BASE)); + return scu_get_core_count(__io_address(UX500_SCU_BASE)); } static DEFINE_SPINLOCK(boot_lock); @@ -44,7 +44,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE)); + gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE)); /* * let the primary processor know we're out of the @@ -75,7 +75,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * that it has been released by resetting pen_release. */ pen_release = cpu; - flush_cache_all(); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { @@ -105,12 +106,12 @@ static void __init wakeup_secondary(void) */ #define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4 __raw_writel(virt_to_phys(u8500_secondary_startup), - (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) + + __io_address(UX500_BACKUPRAM0_BASE) + U8500_CPU1_JUMPADDR_OFFSET); #define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 __raw_writel(0xA1FEED01, - (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) + + __io_address(UX500_BACKUPRAM0_BASE) + U8500_CPU1_WAKEMAGIC_OFFSET); /* make sure write buffer is drained */ @@ -171,7 +172,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * boot CPU, but only if we have more than one CPU. */ percpu_timer_setup(); - scu_enable(__io_address(U8500_SCU_BASE)); + scu_enable(__io_address(UX500_SCU_BASE)); wakeup_secondary(); } } diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index ba81e70ed813..97cf4d831b0c 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := core.o clock.o +obj-y := core.o obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c deleted file mode 100644 index c50a44ea7ee6..000000000000 --- a/arch/arm/mach-versatile/clock.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> - -#include <asm/clkdev.h> -#include <asm/hardware/icst307.h> - -#include "clock.h" - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - struct icst307_vco vco; - vco = icst307_khz_to_vco(clk->params, rate / 1000); - return icst307_khz(clk->params, vco) * 1000; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EIO; - - if (clk->setvco) { - struct icst307_vco vco; - - vco = icst307_khz_to_vco(clk->params, rate / 1000); - clk->rate = icst307_khz(clk->params, vco) * 1000; - clk->setvco(clk, vco); - ret = 0; - } - return ret; -} -EXPORT_SYMBOL(clk_set_rate); diff --git a/arch/arm/mach-versatile/clock.h b/arch/arm/mach-versatile/clock.h deleted file mode 100644 index 03468fdc3e58..000000000000 --- a/arch/arm/mach-versatile/clock.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/clock.h - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -struct module; -struct icst307_params; - -struct clk { - unsigned long rate; - const struct icst307_params *params; - u32 oscoff; - void *data; - void (*setvco)(struct clk *, struct icst307_vco vco); -}; diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 3b1a4ee01815..3dff8641b03f 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -28,19 +28,15 @@ #include <linux/amba/clcd.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/cnt32_to_63.h> #include <linux/io.h> #include <linux/gfp.h> #include <asm/clkdev.h> #include <asm/system.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/leds.h> #include <asm/hardware/arm_timer.h> -#include <asm/hardware/icst307.h> +#include <asm/hardware/icst.h> #include <asm/hardware/vic.h> #include <asm/mach-types.h> @@ -49,9 +45,12 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <mach/clkdev.h> +#include <mach/hardware.h> +#include <mach/platform.h> +#include <plat/timer-sp.h> #include "core.h" -#include "clock.h" /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx @@ -59,7 +58,6 @@ * * Setup a VA for the Versatile Vectored Interrupt Controller. */ -#define __io_address(n) __io(IO_ADDRESS(n)) #define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE) #define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE) @@ -229,27 +227,6 @@ void __init versatile_map_io(void) iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc)); } -#define VERSATILE_REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET) - -/* - * This is the Versatile sched_clock implementation. This has - * a resolution of 41.7ns, and a maximum value of about 35583 days. - * - * The return value is guaranteed to be monotonic in that range as - * long as there is always less than 89 seconds between successive - * calls to this function. - */ -unsigned long long sched_clock(void) -{ - unsigned long long v = cnt32_to_63(readl(VERSATILE_REFCOUNTER)); - - /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */ - v *= 125<<1; - do_div(v, 3<<1); - - return v; -} - #define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET) @@ -380,33 +357,40 @@ static struct mmci_platform_data mmc0_plat_data = { /* * Clock handling */ -static const struct icst307_params versatile_oscvco_params = { - .ref = 24000, - .vco_max = 200000, +static const struct icst_params versatile_oscvco_params = { + .ref = 24000000, + .vco_max = ICST307_VCO_MAX, + .vco_min = ICST307_VCO_MIN, .vd_min = 4 + 8, .vd_max = 511 + 8, .rd_min = 1 + 2, .rd_max = 127 + 2, + .s2div = icst307_s2div, + .idx2s = icst307_idx2s, }; -static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco) +static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco) { - void __iomem *sys = __io_address(VERSATILE_SYS_BASE); - void __iomem *sys_lock = sys + VERSATILE_SYS_LOCK_OFFSET; + void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET; u32 val; - val = readl(sys + clk->oscoff) & ~0x7ffff; + val = readl(clk->vcoreg) & ~0x7ffff; val |= vco.v | (vco.r << 9) | (vco.s << 16); writel(0xa05f, sys_lock); - writel(val, sys + clk->oscoff); + writel(val, clk->vcoreg); writel(0, sys_lock); } +static const struct clk_ops osc4_clk_ops = { + .round = icst_clk_round, + .set = icst_clk_set, + .setvco = versatile_oscvco_set, +}; + static struct clk osc4_clk = { + .ops = &osc4_clk_ops, .params = &versatile_oscvco_params, - .oscoff = VERSATILE_SYS_OSCCLCD_OFFSET, - .setvco = versatile_oscvco_set, }; /* @@ -852,6 +836,8 @@ void __init versatile_init(void) { int i; + osc4_clk.vcoreg = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET; + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); platform_device_register(&versatile_flash_device); @@ -875,120 +861,6 @@ void __init versatile_init(void) #define TIMER1_VA_BASE (__io_address(VERSATILE_TIMER0_1_BASE) + 0x20) #define TIMER2_VA_BASE __io_address(VERSATILE_TIMER2_3_BASE) #define TIMER3_VA_BASE (__io_address(VERSATILE_TIMER2_3_BASE) + 0x20) -#define VA_IC_BASE __io_address(VERSATILE_VIC_BASE) - -/* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 8) -#define TIMER_DIVISOR (TIMER_CTRL_DIV256) -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ -#define TIMER_DIVISOR (TIMER_CTRL_DIV16) -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TIMER_RELOAD (TIMER_INTERVAL) -#define TIMER_DIVISOR (TIMER_CTRL_DIV1) -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - -static void timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - unsigned long ctrl; - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); - - ctrl = TIMER_CTRL_PERIODIC; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE; - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl = TIMER_CTRL_ONESHOT; - ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } - - writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL); -} - -static int timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL); - - writel(evt, TIMER0_VA_BASE + TIMER_LOAD); - writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL); - - return 0; -} - -static struct clock_event_device timer0_clockevent = { - .name = "timer0", - .shift = 32, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = timer_set_mode, - .set_next_event = timer_set_next_event, -}; - -/* - * IRQ handler for the timer - */ -static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &timer0_clockevent; - - writel(1, TIMER0_VA_BASE + TIMER_INTCLR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction versatile_timer_irq = { - .name = "Versatile Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = versatile_timer_interrupt, -}; - -static cycle_t versatile_get_cycles(struct clocksource *cs) -{ - return ~readl(TIMER3_VA_BASE + TIMER_VALUE); -} - -static struct clocksource clocksource_versatile = { - .name = "timer3", - .rating = 200, - .read = versatile_get_cycles, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int __init versatile_clocksource_init(void) -{ - /* setup timer3 as free-running clocksource */ - writel(0, TIMER3_VA_BASE + TIMER_CTRL); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD); - writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE); - writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - TIMER3_VA_BASE + TIMER_CTRL); - - clocksource_versatile.mult = - clocksource_khz2mult(1000, clocksource_versatile.shift); - clocksource_register(&clocksource_versatile); - - return 0; -} /* * Set up timer interrupt, and return the current time in seconds. @@ -1017,22 +889,8 @@ static void __init versatile_timer_init(void) writel(0, TIMER2_VA_BASE + TIMER_CTRL); writel(0, TIMER3_VA_BASE + TIMER_CTRL); - /* - * Make irqs happen for the system timer - */ - setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq); - - versatile_clocksource_init(); - - timer0_clockevent.mult = - div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift); - timer0_clockevent.max_delta_ns = - clockevent_delta2ns(0xffffffff, &timer0_clockevent); - timer0_clockevent.min_delta_ns = - clockevent_delta2ns(0xf, &timer0_clockevent); - - timer0_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&timer0_clockevent); + sp804_clocksource_init(TIMER3_VA_BASE); + sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1); } struct sys_timer versatile_timer = { diff --git a/arch/arm/mach-versatile/include/mach/clkdev.h b/arch/arm/mach-versatile/include/mach/clkdev.h index 04b37a89801c..e58d0771b64e 100644 --- a/arch/arm/mach-versatile/include/mach/clkdev.h +++ b/arch/arm/mach-versatile/include/mach/clkdev.h @@ -1,6 +1,15 @@ #ifndef __ASM_MACH_CLKDEV_H #define __ASM_MACH_CLKDEV_H +#include <plat/clock.h> + +struct clk { + unsigned long rate; + const struct clk_ops *ops; + const struct icst_params *params; + void __iomem *vcoreg; +}; + #define __clk_get(clk) ({ 1; }) #define __clk_put(clk) do { } while (0) diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S index 8c8020980585..e6f7c1663160 100644 --- a/arch/arm/mach-versatile/include/mach/entry-macro.S +++ b/arch/arm/mach-versatile/include/mach/entry-macro.S @@ -8,6 +8,7 @@ * warranty of any kind, whether express or implied. */ #include <mach/hardware.h> +#include <mach/platform.h> #include <asm/hardware/vic.h> .macro disable_fiq diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 7aa906c93154..4f8f99aac938 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -23,7 +23,6 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/sizes.h> -#include <mach/platform.h> /* * PCI space virtual addresses @@ -49,4 +48,6 @@ /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) +#define __io_address(n) __io(IO_ADDRESS(n)) + #endif diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h index 83207395191a..ec087407b163 100644 --- a/arch/arm/mach-versatile/include/mach/platform.h +++ b/arch/arm/mach-versatile/include/mach/platform.h @@ -205,7 +205,7 @@ #define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */ #define VERSATILE_DMAC_BASE 0x10130000 /* DMA controller */ #define VERSATILE_VIC_BASE 0x10140000 /* Vectored interrupt controller */ -#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */ +#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */ /* 0x10000000 - 0x100FFFFF */ #define VERSATILE_AHBM_BASE 0x101D0000 /* AHB monitor */ #define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ @@ -213,7 +213,7 @@ #define VERSATILE_TIMER0_1_BASE 0x101E2000 /* Timer 0 and 1 */ #define VERSATILE_TIMER2_3_BASE 0x101E3000 /* Timer 2 and 3 */ #define VERSATILE_GPIO0_BASE 0x101E4000 /* GPIO port 0 */ -#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */ +#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */ #define VERSATILE_GPIO2_BASE 0x101E6000 /* GPIO port 2 */ #define VERSATILE_GPIO3_BASE 0x101E7000 /* GPIO port 3 */ #define VERSATILE_RTC_BASE 0x101E8000 /* Real Time Clock */ @@ -379,12 +379,6 @@ #define SIC_INT_PCI3 30 -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE VERSATILE_BOOT_ROM_HI - /* * System controller bit assignment */ @@ -397,20 +391,6 @@ #define VERSATILE_TIMER4_EnSel 21 -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 1 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - #define VERSATILE_CSR_BASE 0x10000000 #define VERSATILE_CSR_SIZE 0x10000000 @@ -432,5 +412,3 @@ #endif #endif - -/* END */ diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig new file mode 100644 index 000000000000..3f19b660a165 --- /dev/null +++ b/arch/arm/mach-vexpress/Kconfig @@ -0,0 +1,9 @@ +menu "Versatile Express platform type" + depends on ARCH_VEXPRESS + +config ARCH_VEXPRESS_CA9X4 + bool "Versatile Express Cortex-A9x4 tile" + select CPU_V7 + select ARM_GIC + +endmenu diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile new file mode 100644 index 000000000000..1b71b77ade22 --- /dev/null +++ b/arch/arm/mach-vexpress/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +obj-y := v2m.o +obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot new file mode 100644 index 000000000000..07c2d9c457ec --- /dev/null +++ b/arch/arm/mach-vexpress/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x60008000 +params_phys-y := 0x60000100 +initrd_phys-y := 0x60800000 diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h new file mode 100644 index 000000000000..57dd95ce41f9 --- /dev/null +++ b/arch/arm/mach-vexpress/core.h @@ -0,0 +1,26 @@ +#define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000) +#define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x)) + +#define AMBA_DEVICE(name,busid,base,plat) \ +struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0UL, \ + .init_name = busid, \ + .platform_data = plat, \ + }, \ + .res = { \ + .start = base, \ + .end = base + SZ_4K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + .dma_mask = ~0UL, \ + .irq = IRQ_##base, \ + /* .dma = DMA_##base,*/ \ +} + +struct map_desc; + +void v2m_map_io(struct map_desc *tile, size_t num); +extern struct sys_timer v2m_timer; + +extern void __iomem *gic_cpu_base_addr; diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c new file mode 100644 index 000000000000..e6f73030d5f0 --- /dev/null +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -0,0 +1,249 @@ +/* + * Versatile Express Core Tile Cortex A9x4 Support + */ +#include <linux/init.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> + +#include <asm/clkdev.h> +#include <asm/hardware/arm_timer.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> +#include <asm/mach-types.h> +#include <asm/pmu.h> + +#include <mach/clkdev.h> +#include <mach/ct-ca9x4.h> + +#include <plat/timer-sp.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> + +#include "core.h" + +#include <mach/motherboard.h> + +#define V2M_PA_CS7 0x10000000 + +static struct map_desc ct_ca9x4_io_desc[] __initdata = { + { + .virtual = __MMIO_P2V(CT_CA9X4_MPIC), + .pfn = __phys_to_pfn(CT_CA9X4_MPIC), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = __MMIO_P2V(CT_CA9X4_SP804_TIMER), + .pfn = __phys_to_pfn(CT_CA9X4_SP804_TIMER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = __MMIO_P2V(CT_CA9X4_L2CC), + .pfn = __phys_to_pfn(CT_CA9X4_L2CC), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init ct_ca9x4_map_io(void) +{ + v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); +} + +void __iomem *gic_cpu_base_addr; + +static void __init ct_ca9x4_init_irq(void) +{ + gic_cpu_base_addr = MMIO_P2V(A9_MPCORE_GIC_CPU); + gic_dist_init(0, MMIO_P2V(A9_MPCORE_GIC_DIST), 29); + gic_cpu_init(0, gic_cpu_base_addr); +} + +#if 0 +static void ct_ca9x4_timer_init(void) +{ + writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL); + writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL); + + sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1)); + sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0); +} + +static struct sys_timer ct_ca9x4_timer = { + .init = ct_ca9x4_timer_init, +}; +#endif + +static struct clcd_panel xvga_panel = { + .mode = { + .name = "XVGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15384, + .left_margin = 168, + .right_margin = 8, + .upper_margin = 29, + .lower_margin = 3, + .hsync_len = 144, + .vsync_len = 6, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static void ct_ca9x4_clcd_enable(struct clcd_fb *fb) +{ + v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0); + v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2); +} + +static int ct_ca9x4_clcd_setup(struct clcd_fb *fb) +{ + unsigned long framesize = 1024 * 768 * 2; + dma_addr_t dma; + + fb->panel = &xvga_panel; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map frame buffer\n"); + return -ENOMEM; + } + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +static int ct_ca9x4_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base, + fb->fb.fix.smem_start, fb->fb.fix.smem_len); +} + +static void ct_ca9x4_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +static struct clcd_board ct_ca9x4_clcd_data = { + .name = "CT-CA9X4", + .check = clcdfb_check, + .decode = clcdfb_decode, + .enable = ct_ca9x4_clcd_enable, + .setup = ct_ca9x4_clcd_setup, + .mmap = ct_ca9x4_clcd_mmap, + .remove = ct_ca9x4_clcd_remove, +}; + +static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data); +static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL); +static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL); +static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL); + +static struct amba_device *ct_ca9x4_amba_devs[] __initdata = { + &clcd_device, + &dmc_device, + &smc_device, + &gpio_device, +}; + + +static long ct_round(struct clk *clk, unsigned long rate) +{ + return rate; +} + +static int ct_set(struct clk *clk, unsigned long rate) +{ + return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate); +} + +static const struct clk_ops osc1_clk_ops = { + .round = ct_round, + .set = ct_set, +}; + +static struct clk osc1_clk = { + .ops = &osc1_clk_ops, + .rate = 24000000, +}; + +static struct clk_lookup lookups[] = { + { /* CLCD */ + .dev_id = "ct:clcd", + .clk = &osc1_clk, + }, +}; + +static struct resource pmu_resources[] = { + [0] = { + .start = IRQ_CT_CA9X4_PMU_CPU0, + .end = IRQ_CT_CA9X4_PMU_CPU0, + .flags = IORESOURCE_IRQ, + }, + [1] = { + .start = IRQ_CT_CA9X4_PMU_CPU1, + .end = IRQ_CT_CA9X4_PMU_CPU1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_CT_CA9X4_PMU_CPU2, + .end = IRQ_CT_CA9X4_PMU_CPU2, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_CT_CA9X4_PMU_CPU3, + .end = IRQ_CT_CA9X4_PMU_CPU3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(pmu_resources), + .resource = pmu_resources, +}; + +static void ct_ca9x4_init(void) +{ + int i; + +#ifdef CONFIG_CACHE_L2X0 + l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff); +#endif + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++) + amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); + + platform_device_register(&pmu_device); +} + +MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4") + .phys_io = V2M_UART0, + .io_pg_offst = (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x00000100, + .map_io = ct_ca9x4_map_io, + .init_irq = ct_ca9x4_init_irq, +#if 0 + .timer = &ct_ca9x4_timer, +#else + .timer = &v2m_timer, +#endif + .init_machine = ct_ca9x4_init, +MACHINE_END diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S new file mode 100644 index 000000000000..8a78ff68e1ee --- /dev/null +++ b/arch/arm/mach-vexpress/headsmp.S @@ -0,0 +1,39 @@ +/* + * linux/arch/arm/mach-vexpress/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * Versatile Express specific entry point for secondary CPUs. This + * provides a "holding pen" into which all secondary cores are held + * until we're ready for them to initialise. + */ +ENTRY(vexpress_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release diff --git a/arch/arm/mach-vexpress/include/mach/clkdev.h b/arch/arm/mach-vexpress/include/mach/clkdev.h new file mode 100644 index 000000000000..3f8307d73cad --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/clkdev.h @@ -0,0 +1,15 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#include <plat/clock.h> + +struct clk { + const struct clk_ops *ops; + unsigned long rate; + const struct icst_params *params; +}; + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h new file mode 100644 index 000000000000..8650f04136ef --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h @@ -0,0 +1,47 @@ +#ifndef __MACH_CT_CA9X4_H +#define __MACH_CT_CA9X4_H + +/* + * Physical base addresses + */ +#define CT_CA9X4_CLCDC (0x10020000) +#define CT_CA9X4_AXIRAM (0x10060000) +#define CT_CA9X4_DMC (0x100e0000) +#define CT_CA9X4_SMC (0x100e1000) +#define CT_CA9X4_SCC (0x100e2000) +#define CT_CA9X4_SP804_TIMER (0x100e4000) +#define CT_CA9X4_SP805_WDT (0x100e5000) +#define CT_CA9X4_TZPC (0x100e6000) +#define CT_CA9X4_GPIO (0x100e8000) +#define CT_CA9X4_FASTAXI (0x100e9000) +#define CT_CA9X4_SLOWAXI (0x100ea000) +#define CT_CA9X4_TZASC (0x100ec000) +#define CT_CA9X4_CORESIGHT (0x10200000) +#define CT_CA9X4_MPIC (0x1e000000) +#define CT_CA9X4_SYSTIMER (0x1e004000) +#define CT_CA9X4_SYSWDT (0x1e007000) +#define CT_CA9X4_L2CC (0x1e00a000) + +#define CT_CA9X4_TIMER0 (CT_CA9X4_SP804_TIMER + 0x000) +#define CT_CA9X4_TIMER1 (CT_CA9X4_SP804_TIMER + 0x020) + +#define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000) +#define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100) +#define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200) +#define A9_MPCORE_GIC_DIST (CT_CA9X4_MPIC + 0x1000) + +/* + * Interrupts. Those in {} are for AMBA devices + */ +#define IRQ_CT_CA9X4_CLCDC { 76 } +#define IRQ_CT_CA9X4_DMC { -1 } +#define IRQ_CT_CA9X4_SMC { 77, 78 } +#define IRQ_CT_CA9X4_TIMER0 80 +#define IRQ_CT_CA9X4_TIMER1 81 +#define IRQ_CT_CA9X4_GPIO { 82 } +#define IRQ_CT_CA9X4_PMU_CPU0 92 +#define IRQ_CT_CA9X4_PMU_CPU1 93 +#define IRQ_CT_CA9X4_PMU_CPU2 94 +#define IRQ_CT_CA9X4_PMU_CPU3 95 + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S new file mode 100644 index 000000000000..5167e2aceeba --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -0,0 +1,23 @@ +/* arch/arm/mach-realview/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define DEBUG_LL_UART_OFFSET 0x00009000 + + .macro addruart,rx,tmp + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x10000000 + movne \rx, #0xf8000000 @ virtual base + orr \rx, \rx, #DEBUG_LL_UART_OFFSET + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S new file mode 100644 index 000000000000..20e9fb514f0a --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S @@ -0,0 +1,67 @@ +#include <asm/hardware/gic.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + ldr \tmp, =1021 + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm + diff --git a/arch/arm/mach-vexpress/include/mach/hardware.h b/arch/arm/mach-vexpress/include/mach/hardware.h new file mode 100644 index 000000000000..40a8c178f10d --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/hardware.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/arm/mach-vexpress/include/mach/io.h b/arch/arm/mach-vexpress/include/mach/io.h new file mode 100644 index 000000000000..748bb524ee71 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/io.h @@ -0,0 +1,28 @@ +/* + * arch/arm/mach-vexpress/include/mach/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h new file mode 100644 index 000000000000..7054cbfc9de5 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/irqs.h @@ -0,0 +1,4 @@ +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 + +#define NR_IRQS 128 diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h new file mode 100644 index 000000000000..be28232ae639 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/memory.h @@ -0,0 +1,25 @@ +/* + * arch/arm/mach-vexpress/include/mach/memory.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x60000000) + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h new file mode 100644 index 000000000000..98a8ded055bf --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/motherboard.h @@ -0,0 +1,121 @@ +#ifndef __MACH_MOTHERBOARD_H +#define __MACH_MOTHERBOARD_H + +/* + * Physical addresses, offset from V2M_PA_CS0-3 + */ +#define V2M_NOR0 (V2M_PA_CS0) +#define V2M_NOR1 (V2M_PA_CS1) +#define V2M_SRAM (V2M_PA_CS2) +#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000) +#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000) +#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000) + +/* + * Physical addresses, offset from V2M_PA_CS7 + */ +#define V2M_SYSREGS (V2M_PA_CS7 + 0x00000000) +#define V2M_SYSCTL (V2M_PA_CS7 + 0x00001000) +#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + 0x00002000) + +#define V2M_AACI (V2M_PA_CS7 + 0x00004000) +#define V2M_MMCI (V2M_PA_CS7 + 0x00005000) +#define V2M_KMI0 (V2M_PA_CS7 + 0x00006000) +#define V2M_KMI1 (V2M_PA_CS7 + 0x00007000) + +#define V2M_UART0 (V2M_PA_CS7 + 0x00009000) +#define V2M_UART1 (V2M_PA_CS7 + 0x0000a000) +#define V2M_UART2 (V2M_PA_CS7 + 0x0000b000) +#define V2M_UART3 (V2M_PA_CS7 + 0x0000c000) + +#define V2M_WDT (V2M_PA_CS7 + 0x0000f000) + +#define V2M_TIMER01 (V2M_PA_CS7 + 0x00011000) +#define V2M_TIMER23 (V2M_PA_CS7 + 0x00012000) + +#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + 0x00016000) +#define V2M_RTC (V2M_PA_CS7 + 0x00017000) + +#define V2M_CF (V2M_PA_CS7 + 0x0001a000) +#define V2M_CLCD (V2M_PA_CS7 + 0x0001f000) + +#define V2M_SYS_ID (V2M_SYSREGS + 0x000) +#define V2M_SYS_SW (V2M_SYSREGS + 0x004) +#define V2M_SYS_LED (V2M_SYSREGS + 0x008) +#define V2M_SYS_100HZ (V2M_SYSREGS + 0x024) +#define V2M_SYS_FLAGS (V2M_SYSREGS + 0x030) +#define V2M_SYS_FLAGSSET (V2M_SYSREGS + 0x030) +#define V2M_SYS_FLAGSCLR (V2M_SYSREGS + 0x034) +#define V2M_SYS_NVFLAGS (V2M_SYSREGS + 0x038) +#define V2M_SYS_NVFLAGSSET (V2M_SYSREGS + 0x038) +#define V2M_SYS_NVFLAGSCLR (V2M_SYSREGS + 0x03c) +#define V2M_SYS_MCI (V2M_SYSREGS + 0x048) +#define V2M_SYS_FLASH (V2M_SYSREGS + 0x03c) +#define V2M_SYS_CFGSW (V2M_SYSREGS + 0x058) +#define V2M_SYS_24MHZ (V2M_SYSREGS + 0x05c) +#define V2M_SYS_MISC (V2M_SYSREGS + 0x060) +#define V2M_SYS_DMA (V2M_SYSREGS + 0x064) +#define V2M_SYS_PROCID0 (V2M_SYSREGS + 0x084) +#define V2M_SYS_PROCID1 (V2M_SYSREGS + 0x088) +#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) +#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) +#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) + +#define V2M_TIMER0 (V2M_TIMER01 + 0x000) +#define V2M_TIMER1 (V2M_TIMER01 + 0x020) + +#define V2M_TIMER2 (V2M_TIMER23 + 0x000) +#define V2M_TIMER3 (V2M_TIMER23 + 0x020) + + +/* + * Interrupts. Those in {} are for AMBA devices + */ +#define IRQ_V2M_WDT { (32 + 0) } +#define IRQ_V2M_TIMER0 (32 + 2) +#define IRQ_V2M_TIMER1 (32 + 2) +#define IRQ_V2M_TIMER2 (32 + 3) +#define IRQ_V2M_TIMER3 (32 + 3) +#define IRQ_V2M_RTC { (32 + 4) } +#define IRQ_V2M_UART0 { (32 + 5) } +#define IRQ_V2M_UART1 { (32 + 6) } +#define IRQ_V2M_UART2 { (32 + 7) } +#define IRQ_V2M_UART3 { (32 + 8) } +#define IRQ_V2M_MMCI { (32 + 9), (32 + 10) } +#define IRQ_V2M_AACI { (32 + 11) } +#define IRQ_V2M_KMI0 { (32 + 12) } +#define IRQ_V2M_KMI1 { (32 + 13) } +#define IRQ_V2M_CLCD { (32 + 14) } +#define IRQ_V2M_LAN9118 (32 + 15) +#define IRQ_V2M_ISP1761 (32 + 16) +#define IRQ_V2M_PCIE (32 + 17) + + +/* + * Configuration + */ +#define SYS_CFG_START (1 << 31) +#define SYS_CFG_WRITE (1 << 30) +#define SYS_CFG_OSC (1 << 20) +#define SYS_CFG_VOLT (2 << 20) +#define SYS_CFG_AMP (3 << 20) +#define SYS_CFG_TEMP (4 << 20) +#define SYS_CFG_RESET (5 << 20) +#define SYS_CFG_SCC (6 << 20) +#define SYS_CFG_MUXFPGA (7 << 20) +#define SYS_CFG_SHUTDOWN (8 << 20) +#define SYS_CFG_REBOOT (9 << 20) +#define SYS_CFG_DVIMODE (11 << 20) +#define SYS_CFG_POWER (12 << 20) +#define SYS_CFG_SITE_MB (0 << 16) +#define SYS_CFG_SITE_DB1 (1 << 16) +#define SYS_CFG_SITE_DB2 (2 << 16) +#define SYS_CFG_STACK(n) ((n) << 12) + +#define SYS_CFG_ERR (1 << 1) +#define SYS_CFG_COMPLETE (1 << 0) + +int v2m_cfg_write(u32 devfn, u32 data); +int v2m_cfg_read(u32 devfn, u32 *data); + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h new file mode 100644 index 000000000000..72a9621ed087 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/smp.h @@ -0,0 +1,21 @@ +#ifndef __MACH_SMP_H +#define __MACH_SMP_H + +#include <asm/hardware/gic.h> + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +/* + * We use IRQ1 as the IPI + */ +static inline void smp_cross_call(const struct cpumask *mask) +{ + gic_raise_softirq(mask, 1); +} +#endif diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h new file mode 100644 index 000000000000..899a4e628a4c --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/system.h @@ -0,0 +1,37 @@ +/* + * arch/arm/mach-vexpress/include/mach/system.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ +} + +#endif diff --git a/arch/arm/mach-vexpress/include/mach/timex.h b/arch/arm/mach-vexpress/include/mach/timex.h new file mode 100644 index 000000000000..00029bacd43c --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/timex.h @@ -0,0 +1,23 @@ +/* + * arch/arm/mach-vexpress/include/mach/timex.h + * + * RealView architecture timex specifications + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h new file mode 100644 index 000000000000..7972c5748d0e --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/uncompress.h @@ -0,0 +1,52 @@ +/* + * arch/arm/mach-vexpress/include/mach/uncompress.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) +#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) +#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) +#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) + +#define get_uart_base() (0x10000000 + 0x00009000) + +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 5)) + barrier(); + + AMBA_UART_DR(base) = c; +} + +static inline void flush(void) +{ + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 3)) + barrier(); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-vexpress/include/mach/vmalloc.h b/arch/arm/mach-vexpress/include/mach/vmalloc.h new file mode 100644 index 000000000000..f43a36ef678b --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/vmalloc.h @@ -0,0 +1,21 @@ +/* + * arch/arm/mach-vexpress/include/mach/vmalloc.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END 0xf8000000UL diff --git a/arch/arm/mach-vexpress/localtimer.c b/arch/arm/mach-vexpress/localtimer.c new file mode 100644 index 000000000000..c0e3a59a0bfc --- /dev/null +++ b/arch/arm/mach-vexpress/localtimer.c @@ -0,0 +1,26 @@ +/* + * linux/arch/arm/mach-vexpress/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/clockchips.h> + +#include <asm/smp_twd.h> +#include <asm/localtimer.h> +#include <mach/irqs.h> + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); +} diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c new file mode 100644 index 000000000000..670970699ba9 --- /dev/null +++ b/arch/arm/mach-vexpress/platsmp.c @@ -0,0 +1,190 @@ +/* + * linux/arch/arm/mach-vexpress/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/smp.h> +#include <linux/io.h> + +#include <asm/cacheflush.h> +#include <asm/localtimer.h> +#include <asm/smp_scu.h> +#include <asm/unified.h> + +#include <mach/ct-ca9x4.h> +#include <mach/motherboard.h> +#define V2M_PA_CS7 0x10000000 + +#include "core.h" + +extern void vexpress_secondary_startup(void); + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +static void __iomem *scu_base_addr(void) +{ + return MMIO_P2V(A9_MPCORE_SCU); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + trace_hardirqs_off(); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_cpu_init(0, gic_cpu_base_addr); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + smp_wmb(); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * This is really belt and braces; we hold unintended secondary + * CPUs in the holding pen until we're ready for them. However, + * since we haven't sent them a soft interrupt, they shouldn't + * be there. + */ + pen_release = cpu; + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + smp_cross_call(cpumask_of(cpu)); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + void __iomem *scu_base = scu_base_addr(); + unsigned int i, ncores; + + ncores = scu_base ? scu_get_core_count(scu_base) : 1; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "vexpress: strange CM count of 0? Default to 1\n"); + + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "vexpress: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = num_possible_cpus(); + unsigned int cpu = smp_processor_id(); + int i; + + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. + */ + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + + /* + * Initialise the SCU if there are more than one CPU and let + * them know where to start. + */ + if (max_cpus > 1) { + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + + scu_enable(scu_base_addr()); + + /* + * Write the address of secondary startup into the + * system-wide flags register. The boot monitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); + writel(BSYM(virt_to_phys(vexpress_secondary_startup)), + MMIO_P2V(V2M_SYS_FLAGSSET)); + } +} diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c new file mode 100644 index 000000000000..d250711b8c7a --- /dev/null +++ b/arch/arm/mach-vexpress/v2m.c @@ -0,0 +1,361 @@ +/* + * Versatile Express V2M Motherboard Support + */ +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/amba/mmci.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/smsc911x.h> +#include <linux/spinlock.h> +#include <linux/sysdev.h> +#include <linux/usb/isp1760.h> + +#include <asm/clkdev.h> +#include <asm/sizes.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/hardware/arm_timer.h> + +#include <mach/clkdev.h> +#include <mach/motherboard.h> + +#include <plat/timer-sp.h> + +#include "core.h" + +#define V2M_PA_CS0 0x40000000 +#define V2M_PA_CS1 0x44000000 +#define V2M_PA_CS2 0x48000000 +#define V2M_PA_CS3 0x4c000000 +#define V2M_PA_CS7 0x10000000 + +static struct map_desc v2m_io_desc[] __initdata = { + { + .virtual = __MMIO_P2V(V2M_PA_CS7), + .pfn = __phys_to_pfn(V2M_PA_CS7), + .length = SZ_128K, + .type = MT_DEVICE, + }, +}; + +void __init v2m_map_io(struct map_desc *tile, size_t num) +{ + iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); + iotable_init(tile, num); +} + + +static void v2m_timer_init(void) +{ + writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL); + writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL); + + sp804_clocksource_init(MMIO_P2V(V2M_TIMER1)); + sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0); +} + +struct sys_timer v2m_timer = { + .init = v2m_timer_init, +}; + + +static DEFINE_SPINLOCK(v2m_cfg_lock); + +int v2m_cfg_write(u32 devfn, u32 data) +{ + /* Configuration interface broken? */ + u32 val; + + printk("%s: writing %08x to %08x\n", __func__, data, devfn); + + devfn |= SYS_CFG_START | SYS_CFG_WRITE; + + spin_lock(&v2m_cfg_lock); + val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT)); + + writel(data, MMIO_P2V(V2M_SYS_CFGDATA)); + writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); + + do { + val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + } while (val == 0); + spin_unlock(&v2m_cfg_lock); + + return !!(val & SYS_CFG_ERR); +} + +int v2m_cfg_read(u32 devfn, u32 *data) +{ + u32 val; + + devfn |= SYS_CFG_START; + + spin_lock(&v2m_cfg_lock); + writel(0, MMIO_P2V(V2M_SYS_CFGSTAT)); + writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL)); + + mb(); + + do { + cpu_relax(); + val = readl(MMIO_P2V(V2M_SYS_CFGSTAT)); + } while (val == 0); + + *data = readl(MMIO_P2V(V2M_SYS_CFGDATA)); + spin_unlock(&v2m_cfg_lock); + + return !!(val & SYS_CFG_ERR); +} + + +static struct resource v2m_pcie_i2c_resource = { + .start = V2M_SERIAL_BUS_PCI, + .end = V2M_SERIAL_BUS_PCI + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device v2m_pcie_i2c_device = { + .name = "versatile-i2c", + .id = 0, + .num_resources = 1, + .resource = &v2m_pcie_i2c_resource, +}; + +static struct resource v2m_ddc_i2c_resource = { + .start = V2M_SERIAL_BUS_DVI, + .end = V2M_SERIAL_BUS_DVI + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device v2m_ddc_i2c_device = { + .name = "versatile-i2c", + .id = 1, + .num_resources = 1, + .resource = &v2m_ddc_i2c_resource, +}; + +static struct resource v2m_eth_resources[] = { + { + .start = V2M_LAN9118, + .end = V2M_LAN9118 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_V2M_LAN9118, + .end = IRQ_V2M_LAN9118, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config v2m_eth_config = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device v2m_eth_device = { + .name = "smsc911x", + .id = -1, + .resource = v2m_eth_resources, + .num_resources = ARRAY_SIZE(v2m_eth_resources), + .dev.platform_data = &v2m_eth_config, +}; + +static struct resource v2m_usb_resources[] = { + { + .start = V2M_ISP1761, + .end = V2M_ISP1761 + SZ_128K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_V2M_ISP1761, + .end = IRQ_V2M_ISP1761, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct isp1760_platform_data v2m_usb_config = { + .is_isp1761 = true, + .bus_width_16 = false, + .port1_otg = true, + .analog_oc = false, + .dack_polarity_high = false, + .dreq_polarity_high = false, +}; + +static struct platform_device v2m_usb_device = { + .name = "isp1760", + .id = -1, + .resource = v2m_usb_resources, + .num_resources = ARRAY_SIZE(v2m_usb_resources), + .dev.platform_data = &v2m_usb_config, +}; + +static int v2m_flash_init(void) +{ + writel(0, MMIO_P2V(V2M_SYS_FLASH)); + return 0; +} + +static void v2m_flash_exit(void) +{ + writel(0, MMIO_P2V(V2M_SYS_FLASH)); +} + +static void v2m_flash_set_vpp(int on) +{ + writel(on != 0, MMIO_P2V(V2M_SYS_FLASH)); +} + +static struct flash_platform_data v2m_flash_data = { + .map_name = "cfi_probe", + .width = 4, + .init = v2m_flash_init, + .exit = v2m_flash_exit, + .set_vpp = v2m_flash_set_vpp, +}; + +static struct resource v2m_flash_resources[] = { + { + .start = V2M_NOR0, + .end = V2M_NOR0 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = V2M_NOR1, + .end = V2M_NOR1 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device v2m_flash_device = { + .name = "armflash", + .id = -1, + .resource = v2m_flash_resources, + .num_resources = ARRAY_SIZE(v2m_flash_resources), + .dev.platform_data = &v2m_flash_data, +}; + + +static unsigned int v2m_mmci_status(struct device *dev) +{ + return !(readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0)); +} + +static struct mmci_platform_data v2m_mmci_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .status = v2m_mmci_status, +}; + +static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL); +static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data); +static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL); +static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL); +static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL); +static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL); +static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL); +static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL); +static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL); +static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL); + +static struct amba_device *v2m_amba_devs[] __initdata = { + &aaci_device, + &mmci_device, + &kmi0_device, + &kmi1_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &wdt_device, + &rtc_device, +}; + + +static long v2m_osc_round(struct clk *clk, unsigned long rate) +{ + return rate; +} + +static int v2m_osc1_set(struct clk *clk, unsigned long rate) +{ + return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate); +} + +static const struct clk_ops osc1_clk_ops = { + .round = v2m_osc_round, + .set = v2m_osc1_set, +}; + +static struct clk osc1_clk = { + .ops = &osc1_clk_ops, + .rate = 24000000, +}; + +static struct clk osc2_clk = { + .rate = 24000000, +}; + +static struct clk_lookup v2m_lookups[] = { + { /* UART0 */ + .dev_id = "mb:uart0", + .clk = &osc2_clk, + }, { /* UART1 */ + .dev_id = "mb:uart1", + .clk = &osc2_clk, + }, { /* UART2 */ + .dev_id = "mb:uart2", + .clk = &osc2_clk, + }, { /* UART3 */ + .dev_id = "mb:uart3", + .clk = &osc2_clk, + }, { /* KMI0 */ + .dev_id = "mb:kmi0", + .clk = &osc2_clk, + }, { /* KMI1 */ + .dev_id = "mb:kmi1", + .clk = &osc2_clk, + }, { /* MMC0 */ + .dev_id = "mb:mmci", + .clk = &osc2_clk, + }, { /* CLCD */ + .dev_id = "mb:clcd", + .clk = &osc1_clk, + }, +}; + +static void v2m_power_off(void) +{ + if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0)) + printk(KERN_EMERG "Unable to shutdown\n"); +} + +static void v2m_restart(char str, const char *cmd) +{ + if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0)) + printk(KERN_EMERG "Unable to reboot\n"); +} + +static int __init v2m_init(void) +{ + int i; + + clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); + + platform_device_register(&v2m_pcie_i2c_device); + platform_device_register(&v2m_ddc_i2c_device); + platform_device_register(&v2m_flash_device); + platform_device_register(&v2m_eth_device); + platform_device_register(&v2m_usb_device); + + for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) + amba_device_register(v2m_amba_devs[i], &iomem_resource); + + pm_power_off = v2m_power_off; + arm_pm_restart = v2m_restart; + + return 0; +} +arch_initcall(v2m_init); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 5bd7c89a6045..346ae14824a5 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -572,6 +572,8 @@ config CPU_TLB_V6 config CPU_TLB_V7 bool +config VERIFY_PERMISSION_FAULT + bool endif config CPU_HAS_ASID @@ -760,7 +762,8 @@ config CACHE_FEROCEON_L2_WRITETHROUGH config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ - REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4 + REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \ + ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 default y select OUTER_CACHE select OUTER_CACHE_SYNC @@ -769,7 +772,7 @@ config CACHE_L2X0 config CACHE_TAUROS2 bool "Enable the Tauros2 L2 cache controller" - depends on ARCH_DOVE + depends on (ARCH_DOVE || ARCH_MMP) default y select OUTER_CACHE help @@ -789,6 +792,25 @@ config ARM_L1_CACHE_SHIFT default 6 if ARM_L1_CACHE_SHIFT_6 default 5 +config ARM_DMA_MEM_BUFFERABLE + bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7 + default y if CPU_V6 || CPU_V7 + help + Historically, the kernel has used strongly ordered mappings to + provide DMA coherent memory. With the advent of ARMv7, mapping + memory with differing types results in unpredictable behaviour, + so on these CPUs, this option is forced on. + + Multiple mappings with differing attributes is also unpredictable + on ARMv6 CPUs, but since they do not have aggressive speculative + prefetch, no harm appears to occur. + + However, drivers may be missing the necessary barriers for ARMv6, + and therefore turning this on may result in unpredictable driver + behaviour. Therefore, we offer this as an option. + + You are recommended say 'Y' here and debug any affected drivers. + config ARCH_HAS_BARRIERS bool help diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S index 2e6dc040c654..ec88b157d3bb 100644 --- a/arch/arm/mm/abort-ev7.S +++ b/arch/arm/mm/abort-ev7.S @@ -29,5 +29,26 @@ ENTRY(v7_early_abort) * V6 code adjusts the returned DFSR. * New designs should not need to patch up faults. */ + +#if defined(CONFIG_VERIFY_PERMISSION_FAULT) + /* + * Detect erroneous permission failures and fix + */ + ldr r3, =0x40d @ On permission fault + and r3, r1, r3 + cmp r3, #0x0d + movne pc, lr + + mcr p15, 0, r0, c7, c8, 0 @ Retranslate FAR + isb + mrc p15, 0, r2, c7, c4, 0 @ Read the PAR + and r3, r2, #0x7b @ On translation fault + cmp r3, #0x0b + movne pc, lr + bic r1, r1, #0xf @ Fix up FSR FS[5:0] + and r2, r2, #0x7e + orr r1, r1, r2, LSR #1 +#endif + mov pc, lr ENDPROC(v7_early_abort) diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index a2ab51fa73e2..6f98c358989a 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -17,6 +17,7 @@ #include <linux/errno.h> #include <linux/string.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/init.h> #include <linux/sched.h> #include <linux/uaccess.h> @@ -94,36 +95,29 @@ static const char *usermode_action[] = { "signal+warn" }; -static int -proc_alignment_read(char *page, char **start, off_t off, int count, int *eof, - void *data) +static int alignment_proc_show(struct seq_file *m, void *v) { - char *p = page; - int len; - - p += sprintf(p, "User:\t\t%lu\n", ai_user); - p += sprintf(p, "System:\t\t%lu\n", ai_sys); - p += sprintf(p, "Skipped:\t%lu\n", ai_skipped); - p += sprintf(p, "Half:\t\t%lu\n", ai_half); - p += sprintf(p, "Word:\t\t%lu\n", ai_word); + seq_printf(m, "User:\t\t%lu\n", ai_user); + seq_printf(m, "System:\t\t%lu\n", ai_sys); + seq_printf(m, "Skipped:\t%lu\n", ai_skipped); + seq_printf(m, "Half:\t\t%lu\n", ai_half); + seq_printf(m, "Word:\t\t%lu\n", ai_word); if (cpu_architecture() >= CPU_ARCH_ARMv5TE) - p += sprintf(p, "DWord:\t\t%lu\n", ai_dword); - p += sprintf(p, "Multi:\t\t%lu\n", ai_multi); - p += sprintf(p, "User faults:\t%i (%s)\n", ai_usermode, + seq_printf(m, "DWord:\t\t%lu\n", ai_dword); + seq_printf(m, "Multi:\t\t%lu\n", ai_multi); + seq_printf(m, "User faults:\t%i (%s)\n", ai_usermode, usermode_action[ai_usermode]); - len = (p - page) - off; - if (len < 0) - len = 0; - - *eof = (len <= count) ? 1 : 0; - *start = page + off; + return 0; +} - return len; +static int alignment_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, alignment_proc_show, NULL); } -static int proc_alignment_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t alignment_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { char mode; @@ -136,6 +130,13 @@ static int proc_alignment_write(struct file *file, const char __user *buffer, return count; } +static const struct file_operations alignment_proc_fops = { + .open = alignment_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = alignment_proc_write, +}; #endif /* CONFIG_PROC_FS */ union offset_union { @@ -901,12 +902,10 @@ static int __init alignment_init(void) #ifdef CONFIG_PROC_FS struct proc_dir_entry *res; - res = create_proc_entry("cpu/alignment", S_IWUSR | S_IRUGO, NULL); + res = proc_create("cpu/alignment", S_IWUSR | S_IRUGO, NULL, + &alignment_proc_fops); if (!res) return -ENOMEM; - - res->read_proc = proc_alignment_read; - res->write_proc = proc_alignment_write; #endif /* diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 21ad68ba22ba..9819869d2bc9 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -27,6 +27,7 @@ static void __iomem *l2x0_base; static DEFINE_SPINLOCK(l2x0_lock); +static uint32_t l2x0_way_mask; /* Bitmask of active ways */ static inline void cache_wait(void __iomem *reg, unsigned long mask) { @@ -108,8 +109,8 @@ static inline void l2x0_inv_all(void) /* invalidate all ways */ spin_lock_irqsave(&l2x0_lock, flags); - writel(0xff, l2x0_base + L2X0_INV_WAY); - cache_wait(l2x0_base + L2X0_INV_WAY, 0xff); + writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); + cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); cache_sync(); spin_unlock_irqrestore(&l2x0_lock, flags); } @@ -208,9 +209,37 @@ static void l2x0_flush_range(unsigned long start, unsigned long end) void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) { __u32 aux; + __u32 cache_id; + int ways; + const char *type; l2x0_base = base; + cache_id = readl(l2x0_base + L2X0_CACHE_ID); + aux = readl(l2x0_base + L2X0_AUX_CTRL); + + /* Determine the number of ways */ + switch (cache_id & L2X0_CACHE_ID_PART_MASK) { + case L2X0_CACHE_ID_PART_L310: + if (aux & (1 << 16)) + ways = 16; + else + ways = 8; + type = "L310"; + break; + case L2X0_CACHE_ID_PART_L210: + ways = (aux >> 13) & 0xf; + type = "L210"; + break; + default: + /* Assume unknown chips have 8 ways */ + ways = 8; + type = "L2x0 series"; + break; + } + + l2x0_way_mask = (1 << ways) - 1; + /* * Check if l2x0 controller is already enabled. * If you are booting from non-secure mode @@ -219,8 +248,6 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) if (!(readl(l2x0_base + L2X0_CTRL) & 1)) { /* l2x0 controller is disabled */ - - aux = readl(l2x0_base + L2X0_AUX_CTRL); aux &= aux_mask; aux |= aux_val; writel(aux, l2x0_base + L2X0_AUX_CTRL); @@ -236,5 +263,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) outer_cache.flush_range = l2x0_flush_range; outer_cache.sync = l2x0_cache_sync; - printk(KERN_INFO "L2X0 cache controller enabled\n"); + printk(KERN_INFO "%s cache controller enabled\n", type); + printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n", + ways, cache_id, aux); } diff --git a/arch/arm/mm/copypage-fa.c b/arch/arm/mm/copypage-fa.c index b2a6008b0111..d2852e1635b1 100644 --- a/arch/arm/mm/copypage-fa.c +++ b/arch/arm/mm/copypage-fa.c @@ -40,7 +40,7 @@ fa_copy_user_page(void *kto, const void *kfrom) } void fa_copy_user_highpage(struct page *to, struct page *from, - unsigned long vaddr) + unsigned long vaddr, struct vm_area_struct *vma) { void *kto, *kfrom; diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 0d414c28eb2c..9b906dec1ca1 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -134,8 +134,6 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma, flush_dcache_mmap_unlock(mapping); if (aliases) do_adjust_pte(vma, addr, pfn, ptep); - else - flush_cache_page(vma, addr, pfn); } /* diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 9d40c341e07e..92f5801f99c1 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -463,7 +463,12 @@ static struct fsr_info { { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, { do_bad, SIGKILL, 0, "terminal exception" }, { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, +/* Do we need runtime check ? */ +#if __LINUX_ARM_ARCH__ < 6 { do_bad, SIGBUS, 0, "external abort on linefetch" }, +#else + { do_translation_fault, SIGSEGV, SEGV_MAPERR, "I-cache maintenance fault" }, +#endif { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, { do_bad, SIGBUS, 0, "external abort on linefetch" }, { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 0ed29bfeba1c..1ba6cf5a2c02 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -15,7 +15,6 @@ #include <linux/mman.h> #include <linux/nodemask.h> #include <linux/initrd.h> -#include <linux/sort.h> #include <linux/highmem.h> #include <linux/gfp.h> @@ -224,20 +223,6 @@ static int __init check_initrd(struct meminfo *mi) return initrd_node; } -static inline void map_memory_bank(struct membank *bank) -{ -#ifdef CONFIG_MMU - struct map_desc map; - - map.pfn = bank_pfn_start(bank); - map.virtual = __phys_to_virt(bank_phys_start(bank)); - map.length = bank_phys_size(bank); - map.type = MT_MEMORY; - - create_mapping(&map); -#endif -} - static void __init bootmem_init_node(int node, struct meminfo *mi, unsigned long start_pfn, unsigned long end_pfn) { @@ -247,16 +232,6 @@ static void __init bootmem_init_node(int node, struct meminfo *mi, int i; /* - * Map the memory banks for this node. - */ - for_each_nodebank(i, mi, node) { - struct membank *bank = &mi->bank[i]; - - if (!bank->highmem) - map_memory_bank(bank); - } - - /* * Allocate the bootmem bitmap page. */ boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn); @@ -385,21 +360,12 @@ static void arm_memory_present(struct meminfo *mi, int node) } #endif -static int __init meminfo_cmp(const void *_a, const void *_b) -{ - const struct membank *a = _a, *b = _b; - long cmp = bank_pfn_start(a) - bank_pfn_start(b); - return cmp < 0 ? -1 : cmp > 0 ? 1 : 0; -} - void __init bootmem_init(void) { struct meminfo *mi = &meminfo; unsigned long min, max_low, max_high; int node, initrd_node; - sort(&mi->bank, mi->nr_banks, sizeof(mi->bank[0]), meminfo_cmp, NULL); - /* * Locate which node contains the ramdisk image, if any. */ diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index a888363398f8..815d08eecbb0 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -28,10 +28,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #endif -struct map_desc; -struct meminfo; struct pglist_data; -void __init create_mapping(struct map_desc *md); void __init bootmem_init(void); void reserve_node_zero(struct pglist_data *pgdat); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 241c24a1c18f..e7113d0b8168 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -14,6 +14,7 @@ #include <linux/bootmem.h> #include <linux/mman.h> #include <linux/nodemask.h> +#include <linux/sort.h> #include <asm/cputype.h> #include <asm/mach-types.h> @@ -603,7 +604,7 @@ static void __init create_36bit_mapping(struct map_desc *md, * offsets, and we take full advantage of sections and * supersections. */ -void __init create_mapping(struct map_desc *md) +static void __init create_mapping(struct map_desc *md) { unsigned long phys, addr, length, end; const struct mem_type *type; @@ -1017,6 +1018,39 @@ static void __init kmap_init(void) #endif } +static inline void map_memory_bank(struct membank *bank) +{ + struct map_desc map; + + map.pfn = bank_pfn_start(bank); + map.virtual = __phys_to_virt(bank_phys_start(bank)); + map.length = bank_phys_size(bank); + map.type = MT_MEMORY; + + create_mapping(&map); +} + +static void __init map_lowmem(void) +{ + struct meminfo *mi = &meminfo; + int i; + + /* Map all the lowmem memory banks. */ + for (i = 0; i < mi->nr_banks; i++) { + struct membank *bank = &mi->bank[i]; + + if (!bank->highmem) + map_memory_bank(bank); + } +} + +static int __init meminfo_cmp(const void *_a, const void *_b) +{ + const struct membank *a = _a, *b = _b; + long cmp = bank_pfn_start(a) - bank_pfn_start(b); + return cmp < 0 ? -1 : cmp > 0 ? 1 : 0; +} + /* * paging_init() sets up the page tables, initialises the zone memory * maps, and sets up the zero page, bad page and bad page tables. @@ -1025,9 +1059,12 @@ void __init paging_init(struct machine_desc *mdesc) { void *zero_page; + sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL); + build_mem_type_table(); sanity_check_meminfo(); prepare_page_table(); + map_lowmem(); bootmem_init(); devicemaps_init(mdesc); kmap_init(); diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c index 4c0ab50f399a..cb7658e8acc5 100644 --- a/arch/arm/nwfpe/fpmodule.c +++ b/arch/arm/nwfpe/fpmodule.c @@ -24,6 +24,7 @@ #include "fpa11.h" #include <linux/module.h> +#include <linux/moduleparam.h> /* XXX */ #include <linux/errno.h> @@ -134,13 +135,17 @@ a SIGFPE exception if necessary. If not the relevant bits in the cumulative exceptions flag byte are set and we return. */ +#ifdef CONFIG_DEBUG_USER +/* By default, ignore inexact errors as there are far too many of them to log */ +static int debug = ~BIT_IXC; +#endif + void float_raise(signed char flags) { register unsigned int fpsr, cumulativeTraps; #ifdef CONFIG_DEBUG_USER - /* Ignore inexact errors as there are far too many of them to log */ - if (flags & ~BIT_IXC) + if (flags & debug) printk(KERN_DEBUG "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n", current->comm, current->pid, flags, @@ -179,3 +184,7 @@ module_exit(fpe_exit); MODULE_AUTHOR("Scott Bambrough <scottb@rebel.com>"); MODULE_DESCRIPTION("NWFPE floating point emulator (" NWFPE_BITS " precision)"); MODULE_LICENSE("GPL"); + +#ifdef CONFIG_DEBUG_USER +module_param(debug, int, 0644); +#endif diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile index 88e31f549f50..e666eafed152 100644 --- a/arch/arm/oprofile/Makefile +++ b/arch/arm/oprofile/Makefile @@ -6,9 +6,4 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ oprofilefs.o oprofile_stats.o \ timer_int.o ) -oprofile-y := $(DRIVER_OBJS) common.o backtrace.o -oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o -oprofile-$(CONFIG_OPROFILE_ARM11_CORE) += op_model_arm11_core.o -oprofile-$(CONFIG_OPROFILE_ARMV6) += op_model_v6.o -oprofile-$(CONFIG_OPROFILE_MPCORE) += op_model_mpcore.o -oprofile-$(CONFIG_OPROFILE_ARMV7) += op_model_v7.o +oprofile-y := $(DRIVER_OBJS) common.o diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c deleted file mode 100644 index d805a52b5032..000000000000 --- a/arch/arm/oprofile/backtrace.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Arm specific backtracing code for oprofile - * - * Copyright 2005 Openedhand Ltd. - * - * Author: Richard Purdie <rpurdie@openedhand.com> - * - * Based on i386 oprofile backtrace code by John Levon, David Smith - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/oprofile.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/uaccess.h> -#include <asm/ptrace.h> -#include <asm/stacktrace.h> - -static int report_trace(struct stackframe *frame, void *d) -{ - unsigned int *depth = d; - - if (*depth) { - oprofile_add_trace(frame->pc); - (*depth)--; - } - - return *depth == 0; -} - -/* - * The registers we're interested in are at the end of the variable - * length saved register structure. The fp points at the end of this - * structure so the address of this struct is: - * (struct frame_tail *)(xxx->fp)-1 - */ -struct frame_tail { - struct frame_tail *fp; - unsigned long sp; - unsigned long lr; -} __attribute__((packed)); - -static struct frame_tail* user_backtrace(struct frame_tail *tail) -{ - struct frame_tail buftail[2]; - - /* Also check accessibility of one struct frame_tail beyond */ - if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) - return NULL; - if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail))) - return NULL; - - oprofile_add_trace(buftail[0].lr); - - /* frame pointers should strictly progress back up the stack - * (towards higher addresses) */ - if (tail >= buftail[0].fp) - return NULL; - - return buftail[0].fp-1; -} - -void arm_backtrace(struct pt_regs * const regs, unsigned int depth) -{ - struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1; - - if (!user_mode(regs)) { - struct stackframe frame; - frame.fp = regs->ARM_fp; - frame.sp = regs->ARM_sp; - frame.lr = regs->ARM_lr; - frame.pc = regs->ARM_pc; - walk_stackframe(&frame, report_trace, &depth); - return; - } - - while (depth-- && tail && !((unsigned long) tail & 3)) - tail = user_backtrace(tail); -} diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 3fcd752d6146..0691176899ff 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -2,32 +2,184 @@ * @file common.c * * @remark Copyright 2004 Oprofile Authors + * @remark Copyright 2010 ARM Ltd. * @remark Read the file COPYING * * @author Zwane Mwaikambo + * @author Will Deacon [move to perf] */ +#include <linux/cpumask.h> +#include <linux/err.h> +#include <linux/errno.h> #include <linux/init.h> +#include <linux/mutex.h> #include <linux/oprofile.h> -#include <linux/errno.h> +#include <linux/perf_event.h> +#include <linux/platform_device.h> #include <linux/slab.h> -#include <linux/sysdev.h> -#include <linux/mutex.h> +#include <asm/stacktrace.h> +#include <linux/uaccess.h> -#include "op_counter.h" -#include "op_arm_model.h" +#include <asm/perf_event.h> +#include <asm/ptrace.h> + +#ifdef CONFIG_HW_PERF_EVENTS +/* + * Per performance monitor configuration as set via oprofilefs. + */ +struct op_counter_config { + unsigned long count; + unsigned long enabled; + unsigned long event; + unsigned long unit_mask; + unsigned long kernel; + unsigned long user; + struct perf_event_attr attr; +}; -static struct op_arm_model_spec *op_arm_model; static int op_arm_enabled; static DEFINE_MUTEX(op_arm_mutex); -struct op_counter_config *counter_config; +static struct op_counter_config *counter_config; +static struct perf_event **perf_events[nr_cpumask_bits]; +static int perf_num_counters; + +/* + * Overflow callback for oprofile. + */ +static void op_overflow_handler(struct perf_event *event, int unused, + struct perf_sample_data *data, struct pt_regs *regs) +{ + int id; + u32 cpu = smp_processor_id(); + + for (id = 0; id < perf_num_counters; ++id) + if (perf_events[cpu][id] == event) + break; + + if (id != perf_num_counters) + oprofile_add_sample(regs, id); + else + pr_warning("oprofile: ignoring spurious overflow " + "on cpu %u\n", cpu); +} + +/* + * Called by op_arm_setup to create perf attributes to mirror the oprofile + * settings in counter_config. Attributes are created as `pinned' events and + * so are permanently scheduled on the PMU. + */ +static void op_perf_setup(void) +{ + int i; + u32 size = sizeof(struct perf_event_attr); + struct perf_event_attr *attr; + + for (i = 0; i < perf_num_counters; ++i) { + attr = &counter_config[i].attr; + memset(attr, 0, size); + attr->type = PERF_TYPE_RAW; + attr->size = size; + attr->config = counter_config[i].event; + attr->sample_period = counter_config[i].count; + attr->pinned = 1; + } +} + +static int op_create_counter(int cpu, int event) +{ + int ret = 0; + struct perf_event *pevent; + + if (!counter_config[event].enabled || (perf_events[cpu][event] != NULL)) + return ret; + + pevent = perf_event_create_kernel_counter(&counter_config[event].attr, + cpu, -1, + op_overflow_handler); + + if (IS_ERR(pevent)) { + ret = PTR_ERR(pevent); + } else if (pevent->state != PERF_EVENT_STATE_ACTIVE) { + pr_warning("oprofile: failed to enable event %d " + "on CPU %d\n", event, cpu); + ret = -EBUSY; + } else { + perf_events[cpu][event] = pevent; + } + + return ret; +} + +static void op_destroy_counter(int cpu, int event) +{ + struct perf_event *pevent = perf_events[cpu][event]; + + if (pevent) { + perf_event_release_kernel(pevent); + perf_events[cpu][event] = NULL; + } +} + +/* + * Called by op_arm_start to create active perf events based on the + * perviously configured attributes. + */ +static int op_perf_start(void) +{ + int cpu, event, ret = 0; + + for_each_online_cpu(cpu) { + for (event = 0; event < perf_num_counters; ++event) { + ret = op_create_counter(cpu, event); + if (ret) + goto out; + } + } + +out: + return ret; +} + +/* + * Called by op_arm_stop at the end of a profiling run. + */ +static void op_perf_stop(void) +{ + int cpu, event; + + for_each_online_cpu(cpu) + for (event = 0; event < perf_num_counters; ++event) + op_destroy_counter(cpu, event); +} + + +static char *op_name_from_perf_id(enum arm_perf_pmu_ids id) +{ + switch (id) { + case ARM_PERF_PMU_ID_XSCALE1: + return "arm/xscale1"; + case ARM_PERF_PMU_ID_XSCALE2: + return "arm/xscale2"; + case ARM_PERF_PMU_ID_V6: + return "arm/armv6"; + case ARM_PERF_PMU_ID_V6MP: + return "arm/mpcore"; + case ARM_PERF_PMU_ID_CA8: + return "arm/armv7"; + case ARM_PERF_PMU_ID_CA9: + return "arm/armv7-ca9"; + default: + return NULL; + } +} static int op_arm_create_files(struct super_block *sb, struct dentry *root) { unsigned int i; - for (i = 0; i < op_arm_model->num_counters; i++) { + for (i = 0; i < perf_num_counters; i++) { struct dentry *dir; char buf[4]; @@ -46,12 +198,10 @@ static int op_arm_create_files(struct super_block *sb, struct dentry *root) static int op_arm_setup(void) { - int ret; - spin_lock(&oprofilefs_lock); - ret = op_arm_model->setup_ctrs(); + op_perf_setup(); spin_unlock(&oprofilefs_lock); - return ret; + return 0; } static int op_arm_start(void) @@ -60,8 +210,9 @@ static int op_arm_start(void) mutex_lock(&op_arm_mutex); if (!op_arm_enabled) { - ret = op_arm_model->start(); - op_arm_enabled = !ret; + ret = 0; + op_perf_start(); + op_arm_enabled = 1; } mutex_unlock(&op_arm_mutex); return ret; @@ -71,113 +222,205 @@ static void op_arm_stop(void) { mutex_lock(&op_arm_mutex); if (op_arm_enabled) - op_arm_model->stop(); + op_perf_stop(); op_arm_enabled = 0; mutex_unlock(&op_arm_mutex); } #ifdef CONFIG_PM -static int op_arm_suspend(struct sys_device *dev, pm_message_t state) +static int op_arm_suspend(struct platform_device *dev, pm_message_t state) { mutex_lock(&op_arm_mutex); if (op_arm_enabled) - op_arm_model->stop(); + op_perf_stop(); mutex_unlock(&op_arm_mutex); return 0; } -static int op_arm_resume(struct sys_device *dev) +static int op_arm_resume(struct platform_device *dev) { mutex_lock(&op_arm_mutex); - if (op_arm_enabled && op_arm_model->start()) + if (op_arm_enabled && op_perf_start()) op_arm_enabled = 0; mutex_unlock(&op_arm_mutex); return 0; } -static struct sysdev_class oprofile_sysclass = { - .name = "oprofile", +static struct platform_driver oprofile_driver = { + .driver = { + .name = "arm-oprofile", + }, .resume = op_arm_resume, .suspend = op_arm_suspend, }; -static struct sys_device device_oprofile = { - .id = 0, - .cls = &oprofile_sysclass, -}; +static struct platform_device *oprofile_pdev; static int __init init_driverfs(void) { int ret; - if (!(ret = sysdev_class_register(&oprofile_sysclass))) - ret = sysdev_register(&device_oprofile); + ret = platform_driver_register(&oprofile_driver); + if (ret) + goto out; + oprofile_pdev = platform_device_register_simple( + oprofile_driver.driver.name, 0, NULL, 0); + if (IS_ERR(oprofile_pdev)) { + ret = PTR_ERR(oprofile_pdev); + platform_driver_unregister(&oprofile_driver); + } + +out: return ret; } static void exit_driverfs(void) { - sysdev_unregister(&device_oprofile); - sysdev_class_unregister(&oprofile_sysclass); + platform_device_unregister(oprofile_pdev); + platform_driver_unregister(&oprofile_driver); } #else -#define init_driverfs() do { } while (0) +static int __init init_driverfs(void) { return 0; } #define exit_driverfs() do { } while (0) #endif /* CONFIG_PM */ -int __init oprofile_arch_init(struct oprofile_operations *ops) +static int report_trace(struct stackframe *frame, void *d) { - struct op_arm_model_spec *spec = NULL; - int ret = -ENODEV; + unsigned int *depth = d; - ops->backtrace = arm_backtrace; + if (*depth) { + oprofile_add_trace(frame->pc); + (*depth)--; + } -#ifdef CONFIG_CPU_XSCALE - spec = &op_xscale_spec; -#endif + return *depth == 0; +} -#ifdef CONFIG_OPROFILE_ARMV6 - spec = &op_armv6_spec; -#endif +/* + * The registers we're interested in are at the end of the variable + * length saved register structure. The fp points at the end of this + * structure so the address of this struct is: + * (struct frame_tail *)(xxx->fp)-1 + */ +struct frame_tail { + struct frame_tail *fp; + unsigned long sp; + unsigned long lr; +} __attribute__((packed)); -#ifdef CONFIG_OPROFILE_MPCORE - spec = &op_mpcore_spec; -#endif +static struct frame_tail* user_backtrace(struct frame_tail *tail) +{ + struct frame_tail buftail[2]; -#ifdef CONFIG_OPROFILE_ARMV7 - spec = &op_armv7_spec; -#endif + /* Also check accessibility of one struct frame_tail beyond */ + if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) + return NULL; + if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail))) + return NULL; - if (spec) { - ret = spec->init(); - if (ret < 0) - return ret; + oprofile_add_trace(buftail[0].lr); - counter_config = kcalloc(spec->num_counters, sizeof(struct op_counter_config), - GFP_KERNEL); - if (!counter_config) - return -ENOMEM; + /* frame pointers should strictly progress back up the stack + * (towards higher addresses) */ + if (tail >= buftail[0].fp) + return NULL; - op_arm_model = spec; - init_driverfs(); - ops->create_files = op_arm_create_files; - ops->setup = op_arm_setup; - ops->shutdown = op_arm_stop; - ops->start = op_arm_start; - ops->stop = op_arm_stop; - ops->cpu_type = op_arm_model->name; - printk(KERN_INFO "oprofile: using %s\n", spec->name); + return buftail[0].fp-1; +} + +static void arm_backtrace(struct pt_regs * const regs, unsigned int depth) +{ + struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1; + + if (!user_mode(regs)) { + struct stackframe frame; + frame.fp = regs->ARM_fp; + frame.sp = regs->ARM_sp; + frame.lr = regs->ARM_lr; + frame.pc = regs->ARM_pc; + walk_stackframe(&frame, report_trace, &depth); + return; } + while (depth-- && tail && !((unsigned long) tail & 3)) + tail = user_backtrace(tail); +} + +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ + int cpu, ret = 0; + + perf_num_counters = armpmu_get_max_events(); + + counter_config = kcalloc(perf_num_counters, + sizeof(struct op_counter_config), GFP_KERNEL); + + if (!counter_config) { + pr_info("oprofile: failed to allocate %d " + "counters\n", perf_num_counters); + return -ENOMEM; + } + + ret = init_driverfs(); + if (ret) { + kfree(counter_config); + return ret; + } + + for_each_possible_cpu(cpu) { + perf_events[cpu] = kcalloc(perf_num_counters, + sizeof(struct perf_event *), GFP_KERNEL); + if (!perf_events[cpu]) { + pr_info("oprofile: failed to allocate %d perf events " + "for cpu %d\n", perf_num_counters, cpu); + while (--cpu >= 0) + kfree(perf_events[cpu]); + return -ENOMEM; + } + } + + ops->backtrace = arm_backtrace; + ops->create_files = op_arm_create_files; + ops->setup = op_arm_setup; + ops->start = op_arm_start; + ops->stop = op_arm_stop; + ops->shutdown = op_arm_stop; + ops->cpu_type = op_name_from_perf_id(armpmu_get_pmu_id()); + + if (!ops->cpu_type) + ret = -ENODEV; + else + pr_info("oprofile: using %s\n", ops->cpu_type); + return ret; } void oprofile_arch_exit(void) { - if (op_arm_model) { + int cpu, id; + struct perf_event *event; + + if (*perf_events) { exit_driverfs(); - op_arm_model = NULL; + for_each_possible_cpu(cpu) { + for (id = 0; id < perf_num_counters; ++id) { + event = perf_events[cpu][id]; + if (event != NULL) + perf_event_release_kernel(event); + } + kfree(perf_events[cpu]); + } } - kfree(counter_config); + + if (counter_config) + kfree(counter_config); +} +#else +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ + pr_info("oprofile: hardware counters not available\n"); + return -ENODEV; } +void oprofile_arch_exit(void) {} +#endif /* CONFIG_HW_PERF_EVENTS */ diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h deleted file mode 100644 index 8c4e4f6a1de3..000000000000 --- a/arch/arm/oprofile/op_arm_model.h +++ /dev/null @@ -1,35 +0,0 @@ -/** - * @file op_arm_model.h - * interface to ARM machine specific operations - * - * @remark Copyright 2004 Oprofile Authors - * @remark Read the file COPYING - * - * @author Zwane Mwaikambo - */ - -#ifndef OP_ARM_MODEL_H -#define OP_ARM_MODEL_H - -struct op_arm_model_spec { - int (*init)(void); - unsigned int num_counters; - int (*setup_ctrs)(void); - int (*start)(void); - void (*stop)(void); - char *name; -}; - -#ifdef CONFIG_CPU_XSCALE -extern struct op_arm_model_spec op_xscale_spec; -#endif - -extern struct op_arm_model_spec op_armv6_spec; -extern struct op_arm_model_spec op_mpcore_spec; -extern struct op_arm_model_spec op_armv7_spec; - -extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth); - -extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec); -extern void op_arm_exit(void); -#endif /* OP_ARM_MODEL_H */ diff --git a/arch/arm/oprofile/op_counter.h b/arch/arm/oprofile/op_counter.h deleted file mode 100644 index ca942a63b52f..000000000000 --- a/arch/arm/oprofile/op_counter.h +++ /dev/null @@ -1,27 +0,0 @@ -/** - * @file op_counter.h - * - * @remark Copyright 2004 Oprofile Authors - * @remark Read the file COPYING - * - * @author Zwane Mwaikambo - */ - -#ifndef OP_COUNTER_H -#define OP_COUNTER_H - -/* Per performance monitor configuration as set via - * oprofilefs. - */ -struct op_counter_config { - unsigned long count; - unsigned long enabled; - unsigned long event; - unsigned long unit_mask; - unsigned long kernel; - unsigned long user; -}; - -extern struct op_counter_config *counter_config; - -#endif /* OP_COUNTER_H */ diff --git a/arch/arm/oprofile/op_model_arm11_core.c b/arch/arm/oprofile/op_model_arm11_core.c deleted file mode 100644 index ef3e2653b90c..000000000000 --- a/arch/arm/oprofile/op_model_arm11_core.c +++ /dev/null @@ -1,162 +0,0 @@ -/** - * @file op_model_arm11_core.c - * ARM11 Event Monitor Driver - * @remark Copyright 2004 ARM SMP Development Team - */ -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/oprofile.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/smp.h> - -#include "op_counter.h" -#include "op_arm_model.h" -#include "op_model_arm11_core.h" - -/* - * ARM11 PMU support - */ -static inline void arm11_write_pmnc(u32 val) -{ - /* upper 4bits and 7, 11 are write-as-0 */ - val &= 0x0ffff77f; - asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r" (val)); -} - -static inline u32 arm11_read_pmnc(void) -{ - u32 val; - asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r" (val)); - return val; -} - -static void arm11_reset_counter(unsigned int cnt) -{ - u32 val = -(u32)counter_config[CPU_COUNTER(smp_processor_id(), cnt)].count; - switch (cnt) { - case CCNT: - asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r" (val)); - break; - - case PMN0: - asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r" (val)); - break; - - case PMN1: - asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r" (val)); - break; - } -} - -int arm11_setup_pmu(void) -{ - unsigned int cnt; - u32 pmnc; - - if (arm11_read_pmnc() & PMCR_E) { - printk(KERN_ERR "oprofile: CPU%u PMU still enabled when setup new event counter.\n", smp_processor_id()); - return -EBUSY; - } - - /* initialize PMNC, reset overflow, D bit, C bit and P bit. */ - arm11_write_pmnc(PMCR_OFL_PMN0 | PMCR_OFL_PMN1 | PMCR_OFL_CCNT | - PMCR_C | PMCR_P); - - for (pmnc = 0, cnt = PMN0; cnt <= CCNT; cnt++) { - unsigned long event; - - if (!counter_config[CPU_COUNTER(smp_processor_id(), cnt)].enabled) - continue; - - event = counter_config[CPU_COUNTER(smp_processor_id(), cnt)].event & 255; - - /* - * Set event (if destined for PMNx counters) - */ - if (cnt == PMN0) { - pmnc |= event << 20; - } else if (cnt == PMN1) { - pmnc |= event << 12; - } - - /* - * We don't need to set the event if it's a cycle count - * Enable interrupt for this counter - */ - pmnc |= PMCR_IEN_PMN0 << cnt; - arm11_reset_counter(cnt); - } - arm11_write_pmnc(pmnc); - - return 0; -} - -int arm11_start_pmu(void) -{ - arm11_write_pmnc(arm11_read_pmnc() | PMCR_E); - return 0; -} - -int arm11_stop_pmu(void) -{ - unsigned int cnt; - - arm11_write_pmnc(arm11_read_pmnc() & ~PMCR_E); - - for (cnt = PMN0; cnt <= CCNT; cnt++) - arm11_reset_counter(cnt); - - return 0; -} - -/* - * CPU counters' IRQ handler (one IRQ per CPU) - */ -static irqreturn_t arm11_pmu_interrupt(int irq, void *arg) -{ - struct pt_regs *regs = get_irq_regs(); - unsigned int cnt; - u32 pmnc; - - pmnc = arm11_read_pmnc(); - - for (cnt = PMN0; cnt <= CCNT; cnt++) { - if ((pmnc & (PMCR_OFL_PMN0 << cnt)) && (pmnc & (PMCR_IEN_PMN0 << cnt))) { - arm11_reset_counter(cnt); - oprofile_add_sample(regs, CPU_COUNTER(smp_processor_id(), cnt)); - } - } - /* Clear counter flag(s) */ - arm11_write_pmnc(pmnc); - return IRQ_HANDLED; -} - -int arm11_request_interrupts(const int *irqs, int nr) -{ - unsigned int i; - int ret = 0; - - for(i = 0; i < nr; i++) { - ret = request_irq(irqs[i], arm11_pmu_interrupt, IRQF_DISABLED, "CP15 PMU", NULL); - if (ret != 0) { - printk(KERN_ERR "oprofile: unable to request IRQ%u for MPCORE-EM\n", - irqs[i]); - break; - } - } - - if (i != nr) - while (i-- != 0) - free_irq(irqs[i], NULL); - - return ret; -} - -void arm11_release_interrupts(const int *irqs, int nr) -{ - unsigned int i; - - for (i = 0; i < nr; i++) - free_irq(irqs[i], NULL); -} diff --git a/arch/arm/oprofile/op_model_arm11_core.h b/arch/arm/oprofile/op_model_arm11_core.h deleted file mode 100644 index 1902b99d9dfd..000000000000 --- a/arch/arm/oprofile/op_model_arm11_core.h +++ /dev/null @@ -1,45 +0,0 @@ -/** - * @file op_model_arm11_core.h - * ARM11 Event Monitor Driver - * @remark Copyright 2004 ARM SMP Development Team - * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com> - * @remark Copyright 2000-2004 MontaVista Software Inc - * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com> - * @remark Copyright 2004 Intel Corporation - * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk> - * @remark Copyright 2004 Oprofile Authors - * - * @remark Read the file COPYING - * - * @author Zwane Mwaikambo - */ -#ifndef OP_MODEL_ARM11_CORE_H -#define OP_MODEL_ARM11_CORE_H - -/* - * Per-CPU PMCR - */ -#define PMCR_E (1 << 0) /* Enable */ -#define PMCR_P (1 << 1) /* Count reset */ -#define PMCR_C (1 << 2) /* Cycle counter reset */ -#define PMCR_D (1 << 3) /* Cycle counter counts every 64th cpu cycle */ -#define PMCR_IEN_PMN0 (1 << 4) /* Interrupt enable count reg 0 */ -#define PMCR_IEN_PMN1 (1 << 5) /* Interrupt enable count reg 1 */ -#define PMCR_IEN_CCNT (1 << 6) /* Interrupt enable cycle counter */ -#define PMCR_OFL_PMN0 (1 << 8) /* Count reg 0 overflow */ -#define PMCR_OFL_PMN1 (1 << 9) /* Count reg 1 overflow */ -#define PMCR_OFL_CCNT (1 << 10) /* Cycle counter overflow */ - -#define PMN0 0 -#define PMN1 1 -#define CCNT 2 - -#define CPU_COUNTER(cpu, counter) ((cpu) * 3 + (counter)) - -int arm11_setup_pmu(void); -int arm11_start_pmu(void); -int arm11_stop_pmu(void); -int arm11_request_interrupts(const int *, int); -void arm11_release_interrupts(const int *, int); - -#endif diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c deleted file mode 100644 index f73ce875a395..000000000000 --- a/arch/arm/oprofile/op_model_mpcore.c +++ /dev/null @@ -1,306 +0,0 @@ -/** - * @file op_model_mpcore.c - * MPCORE Event Monitor Driver - * @remark Copyright 2004 ARM SMP Development Team - * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com> - * @remark Copyright 2000-2004 MontaVista Software Inc - * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com> - * @remark Copyright 2004 Intel Corporation - * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk> - * @remark Copyright 2004 Oprofile Authors - * - * @remark Read the file COPYING - * - * @author Zwane Mwaikambo - * - * Counters: - * 0: PMN0 on CPU0, per-cpu configurable event counter - * 1: PMN1 on CPU0, per-cpu configurable event counter - * 2: CCNT on CPU0 - * 3: PMN0 on CPU1 - * 4: PMN1 on CPU1 - * 5: CCNT on CPU1 - * 6: PMN0 on CPU1 - * 7: PMN1 on CPU1 - * 8: CCNT on CPU1 - * 9: PMN0 on CPU1 - * 10: PMN1 on CPU1 - * 11: CCNT on CPU1 - * 12-19: configurable SCU event counters - */ - -/* #define DEBUG */ -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/sched.h> -#include <linux/oprofile.h> -#include <linux/interrupt.h> -#include <linux/smp.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/mach/irq.h> -#include <mach/hardware.h> -#include <mach/board-eb.h> -#include <asm/system.h> -#include <asm/pmu.h> - -#include "op_counter.h" -#include "op_arm_model.h" -#include "op_model_arm11_core.h" -#include "op_model_mpcore.h" - -/* - * MPCore SCU event monitor support - */ -#define SCU_EVENTMONITORS_VA_BASE __io_address(REALVIEW_EB11MP_SCU_BASE + 0x10) - -/* - * Bitmask of used SCU counters - */ -static unsigned int scu_em_used; -static const struct pmu_irqs *pmu_irqs; - -/* - * 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number) - */ -static inline void scu_reset_counter(struct eventmonitor __iomem *emc, unsigned int n) -{ - writel(-(u32)counter_config[SCU_COUNTER(n)].count, &emc->MC[n]); -} - -static inline void scu_set_event(struct eventmonitor __iomem *emc, unsigned int n, u32 event) -{ - event &= 0xff; - writeb(event, &emc->MCEB[n]); -} - -/* - * SCU counters' IRQ handler (one IRQ per counter => 2 IRQs per CPU) - */ -static irqreturn_t scu_em_interrupt(int irq, void *arg) -{ - struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE; - unsigned int cnt; - - cnt = irq - IRQ_EB11MP_PMU_SCU0; - oprofile_add_sample(get_irq_regs(), SCU_COUNTER(cnt)); - scu_reset_counter(emc, cnt); - - /* Clear overflow flag for this counter */ - writel(1 << (cnt + 16), &emc->PMCR); - - return IRQ_HANDLED; -} - -/* Configure just the SCU counters that the user has requested */ -static void scu_setup(void) -{ - struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE; - unsigned int i; - - scu_em_used = 0; - - for (i = 0; i < NUM_SCU_COUNTERS; i++) { - if (counter_config[SCU_COUNTER(i)].enabled && - counter_config[SCU_COUNTER(i)].event) { - scu_set_event(emc, i, 0); /* disable counter for now */ - scu_em_used |= 1 << i; - } - } -} - -static int scu_start(void) -{ - struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE; - unsigned int temp, i; - unsigned long event; - int ret = 0; - - /* - * request the SCU counter interrupts that we need - */ - for (i = 0; i < NUM_SCU_COUNTERS; i++) { - if (scu_em_used & (1 << i)) { - ret = request_irq(IRQ_EB11MP_PMU_SCU0 + i, scu_em_interrupt, IRQF_DISABLED, "SCU PMU", NULL); - if (ret) { - printk(KERN_ERR "oprofile: unable to request IRQ%u for SCU Event Monitor\n", - IRQ_EB11MP_PMU_SCU0 + i); - goto err_free_scu; - } - } - } - - /* - * clear overflow and enable interrupt for all used counters - */ - temp = readl(&emc->PMCR); - for (i = 0; i < NUM_SCU_COUNTERS; i++) { - if (scu_em_used & (1 << i)) { - scu_reset_counter(emc, i); - event = counter_config[SCU_COUNTER(i)].event; - scu_set_event(emc, i, event); - - /* clear overflow/interrupt */ - temp |= 1 << (i + 16); - /* enable interrupt*/ - temp |= 1 << (i + 8); - } - } - - /* Enable all 8 counters */ - temp |= PMCR_E; - writel(temp, &emc->PMCR); - - return 0; - - err_free_scu: - while (i--) - free_irq(IRQ_EB11MP_PMU_SCU0 + i, NULL); - return ret; -} - -static void scu_stop(void) -{ - struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE; - unsigned int temp, i; - - /* Disable counter interrupts */ - /* Don't disable all 8 counters (with the E bit) as they may be in use */ - temp = readl(&emc->PMCR); - for (i = 0; i < NUM_SCU_COUNTERS; i++) { - if (scu_em_used & (1 << i)) - temp &= ~(1 << (i + 8)); - } - writel(temp, &emc->PMCR); - - /* Free counter interrupts and reset counters */ - for (i = 0; i < NUM_SCU_COUNTERS; i++) { - if (scu_em_used & (1 << i)) { - scu_reset_counter(emc, i); - free_irq(IRQ_EB11MP_PMU_SCU0 + i, NULL); - } - } -} - -struct em_function_data { - int (*fn)(void); - int ret; -}; - -static void em_func(void *data) -{ - struct em_function_data *d = data; - int ret = d->fn(); - if (ret) - d->ret = ret; -} - -static int em_call_function(int (*fn)(void)) -{ - struct em_function_data data; - - data.fn = fn; - data.ret = 0; - - preempt_disable(); - smp_call_function(em_func, &data, 1); - em_func(&data); - preempt_enable(); - - return data.ret; -} - -/* - * Glue to stick the individual ARM11 PMUs and the SCU - * into the oprofile framework. - */ -static int em_setup_ctrs(void) -{ - int ret; - - /* Configure CPU counters by cross-calling to the other CPUs */ - ret = em_call_function(arm11_setup_pmu); - if (ret == 0) - scu_setup(); - - return 0; -} - -static int em_start(void) -{ - int ret; - - pmu_irqs = reserve_pmu(); - if (IS_ERR(pmu_irqs)) { - ret = PTR_ERR(pmu_irqs); - goto out; - } - - ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs); - if (ret == 0) { - em_call_function(arm11_start_pmu); - - ret = scu_start(); - if (ret) { - arm11_release_interrupts(pmu_irqs->irqs, - pmu_irqs->num_irqs); - } else { - release_pmu(pmu_irqs); - pmu_irqs = NULL; - } - } - -out: - return ret; -} - -static void em_stop(void) -{ - em_call_function(arm11_stop_pmu); - arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs); - scu_stop(); - release_pmu(pmu_irqs); -} - -/* - * Why isn't there a function to route an IRQ to a specific CPU in - * genirq? - */ -static void em_route_irq(int irq, unsigned int cpu) -{ - struct irq_desc *desc = irq_desc + irq; - const struct cpumask *mask = cpumask_of(cpu); - - spin_lock_irq(&desc->lock); - cpumask_copy(desc->affinity, mask); - desc->chip->set_affinity(irq, mask); - spin_unlock_irq(&desc->lock); -} - -static int em_setup(void) -{ - /* - * Send SCU PMU interrupts to the "owner" CPU. - */ - em_route_irq(IRQ_EB11MP_PMU_SCU0, 0); - em_route_irq(IRQ_EB11MP_PMU_SCU1, 0); - em_route_irq(IRQ_EB11MP_PMU_SCU2, 1); - em_route_irq(IRQ_EB11MP_PMU_SCU3, 1); - em_route_irq(IRQ_EB11MP_PMU_SCU4, 2); - em_route_irq(IRQ_EB11MP_PMU_SCU5, 2); - em_route_irq(IRQ_EB11MP_PMU_SCU6, 3); - em_route_irq(IRQ_EB11MP_PMU_SCU7, 3); - - return init_pmu(); -} - -struct op_arm_model_spec op_mpcore_spec = { - .init = em_setup, - .num_counters = MPCORE_NUM_COUNTERS, - .setup_ctrs = em_setup_ctrs, - .start = em_start, - .stop = em_stop, - .name = "arm/mpcore", -}; diff --git a/arch/arm/oprofile/op_model_mpcore.h b/arch/arm/oprofile/op_model_mpcore.h deleted file mode 100644 index 73d811023688..000000000000 --- a/arch/arm/oprofile/op_model_mpcore.h +++ /dev/null @@ -1,61 +0,0 @@ -/** - * @file op_model_mpcore.c - * MPCORE Event Monitor Driver - * @remark Copyright 2004 ARM SMP Development Team - * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com> - * @remark Copyright 2000-2004 MontaVista Software Inc - * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com> - * @remark Copyright 2004 Intel Corporation - * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk> - * @remark Copyright 2004 Oprofile Authors - * - * @remark Read the file COPYING - * - * @author Zwane Mwaikambo - */ -#ifndef OP_MODEL_MPCORE_H -#define OP_MODEL_MPCORE_H - -struct eventmonitor { - unsigned long PMCR; - unsigned char MCEB[8]; - unsigned long MC[8]; -}; - -/* - * List of userspace counter numbers: note that the structure is important. - * The code relies on CPUn's counters being CPU0's counters + 3n - * and on CPU0's counters starting at 0 - */ - -#define COUNTER_CPU0_PMN0 0 -#define COUNTER_CPU0_PMN1 1 -#define COUNTER_CPU0_CCNT 2 - -#define COUNTER_CPU1_PMN0 3 -#define COUNTER_CPU1_PMN1 4 -#define COUNTER_CPU1_CCNT 5 - -#define COUNTER_CPU2_PMN0 6 -#define COUNTER_CPU2_PMN1 7 -#define COUNTER_CPU2_CCNT 8 - -#define COUNTER_CPU3_PMN0 9 -#define COUNTER_CPU3_PMN1 10 -#define COUNTER_CPU3_CCNT 11 - -#define COUNTER_SCU_MN0 12 -#define COUNTER_SCU_MN1 13 -#define COUNTER_SCU_MN2 14 -#define COUNTER_SCU_MN3 15 -#define COUNTER_SCU_MN4 16 -#define COUNTER_SCU_MN5 17 -#define COUNTER_SCU_MN6 18 -#define COUNTER_SCU_MN7 19 -#define NUM_SCU_COUNTERS 8 - -#define SCU_COUNTER(number) ((number) + COUNTER_SCU_MN0) - -#define MPCORE_NUM_COUNTERS SCU_COUNTER(NUM_SCU_COUNTERS) - -#endif diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c deleted file mode 100644 index a22357a2fd08..000000000000 --- a/arch/arm/oprofile/op_model_v6.c +++ /dev/null @@ -1,78 +0,0 @@ -/** - * @file op_model_v6.c - * ARM11 Performance Monitor Driver - * - * Based on op_model_xscale.c - * - * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com> - * @remark Copyright 2000-2004 MontaVista Software Inc - * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com> - * @remark Copyright 2004 Intel Corporation - * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk> - * @remark Copyright 2004 OProfile Authors - * - * @remark Read the file COPYING - * - * @author Tony Lindgren <tony@atomide.com> - */ - -/* #define DEBUG */ -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/sched.h> -#include <linux/oprofile.h> -#include <linux/interrupt.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/pmu.h> - -#include "op_counter.h" -#include "op_arm_model.h" -#include "op_model_arm11_core.h" - -static const struct pmu_irqs *pmu_irqs; - -static void armv6_pmu_stop(void) -{ - arm11_stop_pmu(); - arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs); - release_pmu(pmu_irqs); - pmu_irqs = NULL; -} - -static int armv6_pmu_start(void) -{ - int ret; - - pmu_irqs = reserve_pmu(); - if (IS_ERR(pmu_irqs)) { - ret = PTR_ERR(pmu_irqs); - goto out; - } - - ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs); - if (ret >= 0) { - ret = arm11_start_pmu(); - } else { - release_pmu(pmu_irqs); - pmu_irqs = NULL; - } - -out: - return ret; -} - -static int armv6_detect_pmu(void) -{ - return 0; -} - -struct op_arm_model_spec op_armv6_spec = { - .init = armv6_detect_pmu, - .num_counters = 3, - .setup_ctrs = arm11_setup_pmu, - .start = armv6_pmu_start, - .stop = armv6_pmu_stop, - .name = "arm/armv6", -}; diff --git a/arch/arm/oprofile/op_model_v7.c b/arch/arm/oprofile/op_model_v7.c deleted file mode 100644 index 8642d0891ae1..000000000000 --- a/arch/arm/oprofile/op_model_v7.c +++ /dev/null @@ -1,415 +0,0 @@ -/** - * op_model_v7.c - * ARM V7 (Cortex A8) Event Monitor Driver - * - * Copyright 2008 Jean Pihet <jpihet@mvista.com> - * Copyright 2004 ARM SMP Development Team - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/oprofile.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/smp.h> - -#include <asm/pmu.h> - -#include "op_counter.h" -#include "op_arm_model.h" -#include "op_model_v7.h" - -/* #define DEBUG */ - - -/* - * ARM V7 PMNC support - */ - -static u32 cnt_en[CNTMAX]; - -static inline void armv7_pmnc_write(u32 val) -{ - val &= PMNC_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r" (val)); -} - -static inline u32 armv7_pmnc_read(void) -{ - u32 val; - - asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val)); - return val; -} - -static inline u32 armv7_pmnc_enable_counter(unsigned int cnt) -{ - u32 val; - - if (cnt >= CNTMAX) { - printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter" - " %d\n", smp_processor_id(), cnt); - return -1; - } - - if (cnt == CCNT) - val = CNTENS_C; - else - val = (1 << (cnt - CNT0)); - - val &= CNTENS_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val)); - - return cnt; -} - -static inline u32 armv7_pmnc_disable_counter(unsigned int cnt) -{ - u32 val; - - if (cnt >= CNTMAX) { - printk(KERN_ERR "oprofile: CPU%u disabling wrong PMNC counter" - " %d\n", smp_processor_id(), cnt); - return -1; - } - - if (cnt == CCNT) - val = CNTENC_C; - else - val = (1 << (cnt - CNT0)); - - val &= CNTENC_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val)); - - return cnt; -} - -static inline u32 armv7_pmnc_enable_intens(unsigned int cnt) -{ - u32 val; - - if (cnt >= CNTMAX) { - printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter" - " interrupt enable %d\n", smp_processor_id(), cnt); - return -1; - } - - if (cnt == CCNT) - val = INTENS_C; - else - val = (1 << (cnt - CNT0)); - - val &= INTENS_MASK; - asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val)); - - return cnt; -} - -static inline u32 armv7_pmnc_getreset_flags(void) -{ - u32 val; - - /* Read */ - asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); - - /* Write to clear flags */ - val &= FLAG_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val)); - - return val; -} - -static inline int armv7_pmnc_select_counter(unsigned int cnt) -{ - u32 val; - - if ((cnt == CCNT) || (cnt >= CNTMAX)) { - printk(KERN_ERR "oprofile: CPU%u selecting wrong PMNC counteri" - " %d\n", smp_processor_id(), cnt); - return -1; - } - - val = (cnt - CNT0) & SELECT_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); - - return cnt; -} - -static inline void armv7_pmnc_write_evtsel(unsigned int cnt, u32 val) -{ - if (armv7_pmnc_select_counter(cnt) == cnt) { - val &= EVTSEL_MASK; - asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val)); - } -} - -static void armv7_pmnc_reset_counter(unsigned int cnt) -{ - u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt); - u32 val = -(u32)counter_config[cpu_cnt].count; - - switch (cnt) { - case CCNT: - armv7_pmnc_disable_counter(cnt); - - asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (val)); - - if (cnt_en[cnt] != 0) - armv7_pmnc_enable_counter(cnt); - - break; - - case CNT0: - case CNT1: - case CNT2: - case CNT3: - armv7_pmnc_disable_counter(cnt); - - if (armv7_pmnc_select_counter(cnt) == cnt) - asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (val)); - - if (cnt_en[cnt] != 0) - armv7_pmnc_enable_counter(cnt); - - break; - - default: - printk(KERN_ERR "oprofile: CPU%u resetting wrong PMNC counter" - " %d\n", smp_processor_id(), cnt); - break; - } -} - -int armv7_setup_pmnc(void) -{ - unsigned int cnt; - - if (armv7_pmnc_read() & PMNC_E) { - printk(KERN_ERR "oprofile: CPU%u PMNC still enabled when setup" - " new event counter.\n", smp_processor_id()); - return -EBUSY; - } - - /* Initialize & Reset PMNC: C bit and P bit */ - armv7_pmnc_write(PMNC_P | PMNC_C); - - - for (cnt = CCNT; cnt < CNTMAX; cnt++) { - unsigned long event; - u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt); - - /* - * Disable counter - */ - armv7_pmnc_disable_counter(cnt); - cnt_en[cnt] = 0; - - if (!counter_config[cpu_cnt].enabled) - continue; - - event = counter_config[cpu_cnt].event & 255; - - /* - * Set event (if destined for PMNx counters) - * We don't need to set the event if it's a cycle count - */ - if (cnt != CCNT) - armv7_pmnc_write_evtsel(cnt, event); - - /* - * Enable interrupt for this counter - */ - armv7_pmnc_enable_intens(cnt); - - /* - * Reset counter - */ - armv7_pmnc_reset_counter(cnt); - - /* - * Enable counter - */ - armv7_pmnc_enable_counter(cnt); - cnt_en[cnt] = 1; - } - - return 0; -} - -static inline void armv7_start_pmnc(void) -{ - armv7_pmnc_write(armv7_pmnc_read() | PMNC_E); -} - -static inline void armv7_stop_pmnc(void) -{ - armv7_pmnc_write(armv7_pmnc_read() & ~PMNC_E); -} - -/* - * CPU counters' IRQ handler (one IRQ per CPU) - */ -static irqreturn_t armv7_pmnc_interrupt(int irq, void *arg) -{ - struct pt_regs *regs = get_irq_regs(); - unsigned int cnt; - u32 flags; - - - /* - * Stop IRQ generation - */ - armv7_stop_pmnc(); - - /* - * Get and reset overflow status flags - */ - flags = armv7_pmnc_getreset_flags(); - - /* - * Cycle counter - */ - if (flags & FLAG_C) { - u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), CCNT); - armv7_pmnc_reset_counter(CCNT); - oprofile_add_sample(regs, cpu_cnt); - } - - /* - * PMNC counters 0:3 - */ - for (cnt = CNT0; cnt < CNTMAX; cnt++) { - if (flags & (1 << (cnt - CNT0))) { - u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt); - armv7_pmnc_reset_counter(cnt); - oprofile_add_sample(regs, cpu_cnt); - } - } - - /* - * Allow IRQ generation - */ - armv7_start_pmnc(); - - return IRQ_HANDLED; -} - -int armv7_request_interrupts(const int *irqs, int nr) -{ - unsigned int i; - int ret = 0; - - for (i = 0; i < nr; i++) { - ret = request_irq(irqs[i], armv7_pmnc_interrupt, - IRQF_DISABLED, "CP15 PMNC", NULL); - if (ret != 0) { - printk(KERN_ERR "oprofile: unable to request IRQ%u" - " for ARMv7\n", - irqs[i]); - break; - } - } - - if (i != nr) - while (i-- != 0) - free_irq(irqs[i], NULL); - - return ret; -} - -void armv7_release_interrupts(const int *irqs, int nr) -{ - unsigned int i; - - for (i = 0; i < nr; i++) - free_irq(irqs[i], NULL); -} - -#ifdef DEBUG -static void armv7_pmnc_dump_regs(void) -{ - u32 val; - unsigned int cnt; - - printk(KERN_INFO "PMNC registers dump:\n"); - - asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val)); - printk(KERN_INFO "PMNC =0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val)); - printk(KERN_INFO "CNTENS=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val)); - printk(KERN_INFO "INTENS=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); - printk(KERN_INFO "FLAGS =0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val)); - printk(KERN_INFO "SELECT=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); - printk(KERN_INFO "CCNT =0x%08x\n", val); - - for (cnt = CNT0; cnt < CNTMAX; cnt++) { - armv7_pmnc_select_counter(cnt); - asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); - printk(KERN_INFO "CNT[%d] count =0x%08x\n", cnt-CNT0, val); - asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val)); - printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", cnt-CNT0, val); - } -} -#endif - -static const struct pmu_irqs *pmu_irqs; - -static void armv7_pmnc_stop(void) -{ -#ifdef DEBUG - armv7_pmnc_dump_regs(); -#endif - armv7_stop_pmnc(); - armv7_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs); - release_pmu(pmu_irqs); - pmu_irqs = NULL; -} - -static int armv7_pmnc_start(void) -{ - int ret; - - pmu_irqs = reserve_pmu(); - if (IS_ERR(pmu_irqs)) - return PTR_ERR(pmu_irqs); - -#ifdef DEBUG - armv7_pmnc_dump_regs(); -#endif - ret = armv7_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs); - if (ret >= 0) { - armv7_start_pmnc(); - } else { - release_pmu(pmu_irqs); - pmu_irqs = NULL; - } - - return ret; -} - -static int armv7_detect_pmnc(void) -{ - return 0; -} - -struct op_arm_model_spec op_armv7_spec = { - .init = armv7_detect_pmnc, - .num_counters = 5, - .setup_ctrs = armv7_setup_pmnc, - .start = armv7_pmnc_start, - .stop = armv7_pmnc_stop, - .name = "arm/armv7", -}; diff --git a/arch/arm/oprofile/op_model_v7.h b/arch/arm/oprofile/op_model_v7.h deleted file mode 100644 index 9ca334b39c75..000000000000 --- a/arch/arm/oprofile/op_model_v7.h +++ /dev/null @@ -1,103 +0,0 @@ -/** - * op_model_v7.h - * ARM v7 (Cortex A8) Event Monitor Driver - * - * Copyright 2008 Jean Pihet <jpihet@mvista.com> - * Copyright 2004 ARM SMP Development Team - * Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com> - * Copyright 2000-2004 MontaVista Software Inc - * Copyright 2004 Dave Jiang <dave.jiang@intel.com> - * Copyright 2004 Intel Corporation - * Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk> - * Copyright 2004 Oprofile Authors - * - * Read the file COPYING - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef OP_MODEL_V7_H -#define OP_MODEL_V7_H - -/* - * Per-CPU PMNC: config reg - */ -#define PMNC_E (1 << 0) /* Enable all counters */ -#define PMNC_P (1 << 1) /* Reset all counters */ -#define PMNC_C (1 << 2) /* Cycle counter reset */ -#define PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */ -#define PMNC_X (1 << 4) /* Export to ETM */ -#define PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ -#define PMNC_MASK 0x3f /* Mask for writable bits */ - -/* - * Available counters - */ -#define CCNT 0 -#define CNT0 1 -#define CNT1 2 -#define CNT2 3 -#define CNT3 4 -#define CNTMAX 5 - -#define CPU_COUNTER(cpu, counter) ((cpu) * CNTMAX + (counter)) - -/* - * CNTENS: counters enable reg - */ -#define CNTENS_P0 (1 << 0) -#define CNTENS_P1 (1 << 1) -#define CNTENS_P2 (1 << 2) -#define CNTENS_P3 (1 << 3) -#define CNTENS_C (1 << 31) -#define CNTENS_MASK 0x8000000f /* Mask for writable bits */ - -/* - * CNTENC: counters disable reg - */ -#define CNTENC_P0 (1 << 0) -#define CNTENC_P1 (1 << 1) -#define CNTENC_P2 (1 << 2) -#define CNTENC_P3 (1 << 3) -#define CNTENC_C (1 << 31) -#define CNTENC_MASK 0x8000000f /* Mask for writable bits */ - -/* - * INTENS: counters overflow interrupt enable reg - */ -#define INTENS_P0 (1 << 0) -#define INTENS_P1 (1 << 1) -#define INTENS_P2 (1 << 2) -#define INTENS_P3 (1 << 3) -#define INTENS_C (1 << 31) -#define INTENS_MASK 0x8000000f /* Mask for writable bits */ - -/* - * EVTSEL: Event selection reg - */ -#define EVTSEL_MASK 0x7f /* Mask for writable bits */ - -/* - * SELECT: Counter selection reg - */ -#define SELECT_MASK 0x1f /* Mask for writable bits */ - -/* - * FLAG: counters overflow flag status reg - */ -#define FLAG_P0 (1 << 0) -#define FLAG_P1 (1 << 1) -#define FLAG_P2 (1 << 2) -#define FLAG_P3 (1 << 3) -#define FLAG_C (1 << 31) -#define FLAG_MASK 0x8000000f /* Mask for writable bits */ - - -int armv7_setup_pmu(void); -int armv7_start_pmu(void); -int armv7_stop_pmu(void); -int armv7_request_interrupts(const int *, int); -void armv7_release_interrupts(const int *, int); - -#endif diff --git a/arch/arm/oprofile/op_model_xscale.c b/arch/arm/oprofile/op_model_xscale.c deleted file mode 100644 index 1d34a02048bd..000000000000 --- a/arch/arm/oprofile/op_model_xscale.c +++ /dev/null @@ -1,444 +0,0 @@ -/** - * @file op_model_xscale.c - * XScale Performance Monitor Driver - * - * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com> - * @remark Copyright 2000-2004 MontaVista Software Inc - * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com> - * @remark Copyright 2004 Intel Corporation - * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk> - * @remark Copyright 2004 OProfile Authors - * - * @remark Read the file COPYING - * - * @author Zwane Mwaikambo - */ - -/* #define DEBUG */ -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/sched.h> -#include <linux/oprofile.h> -#include <linux/interrupt.h> -#include <linux/irq.h> - -#include <asm/cputype.h> -#include <asm/pmu.h> - -#include "op_counter.h" -#include "op_arm_model.h" - -#define PMU_ENABLE 0x001 /* Enable counters */ -#define PMN_RESET 0x002 /* Reset event counters */ -#define CCNT_RESET 0x004 /* Reset clock counter */ -#define PMU_RESET (CCNT_RESET | PMN_RESET) -#define PMU_CNT64 0x008 /* Make CCNT count every 64th cycle */ - -/* - * Different types of events that can be counted by the XScale PMU - * as used by Oprofile userspace. Here primarily for documentation - * purposes. - */ - -#define EVT_ICACHE_MISS 0x00 -#define EVT_ICACHE_NO_DELIVER 0x01 -#define EVT_DATA_STALL 0x02 -#define EVT_ITLB_MISS 0x03 -#define EVT_DTLB_MISS 0x04 -#define EVT_BRANCH 0x05 -#define EVT_BRANCH_MISS 0x06 -#define EVT_INSTRUCTION 0x07 -#define EVT_DCACHE_FULL_STALL 0x08 -#define EVT_DCACHE_FULL_STALL_CONTIG 0x09 -#define EVT_DCACHE_ACCESS 0x0A -#define EVT_DCACHE_MISS 0x0B -#define EVT_DCACE_WRITE_BACK 0x0C -#define EVT_PC_CHANGED 0x0D -#define EVT_BCU_REQUEST 0x10 -#define EVT_BCU_FULL 0x11 -#define EVT_BCU_DRAIN 0x12 -#define EVT_BCU_ECC_NO_ELOG 0x14 -#define EVT_BCU_1_BIT_ERR 0x15 -#define EVT_RMW 0x16 -/* EVT_CCNT is not hardware defined */ -#define EVT_CCNT 0xFE -#define EVT_UNUSED 0xFF - -struct pmu_counter { - volatile unsigned long ovf; - unsigned long reset_counter; -}; - -enum { CCNT, PMN0, PMN1, PMN2, PMN3, MAX_COUNTERS }; - -static struct pmu_counter results[MAX_COUNTERS]; - -/* - * There are two versions of the PMU in current XScale processors - * with differing register layouts and number of performance counters. - * e.g. IOP32x is xsc1 whilst IOP33x is xsc2. - * We detect which register layout to use in xscale_detect_pmu() - */ -enum { PMU_XSC1, PMU_XSC2 }; - -struct pmu_type { - int id; - char *name; - int num_counters; - unsigned int int_enable; - unsigned int cnt_ovf[MAX_COUNTERS]; - unsigned int int_mask[MAX_COUNTERS]; -}; - -static struct pmu_type pmu_parms[] = { - { - .id = PMU_XSC1, - .name = "arm/xscale1", - .num_counters = 3, - .int_mask = { [PMN0] = 0x10, [PMN1] = 0x20, - [CCNT] = 0x40 }, - .cnt_ovf = { [CCNT] = 0x400, [PMN0] = 0x100, - [PMN1] = 0x200}, - }, - { - .id = PMU_XSC2, - .name = "arm/xscale2", - .num_counters = 5, - .int_mask = { [CCNT] = 0x01, [PMN0] = 0x02, - [PMN1] = 0x04, [PMN2] = 0x08, - [PMN3] = 0x10 }, - .cnt_ovf = { [CCNT] = 0x01, [PMN0] = 0x02, - [PMN1] = 0x04, [PMN2] = 0x08, - [PMN3] = 0x10 }, - }, -}; - -static struct pmu_type *pmu; - -static void write_pmnc(u32 val) -{ - if (pmu->id == PMU_XSC1) { - /* upper 4bits and 7, 11 are write-as-0 */ - val &= 0xffff77f; - __asm__ __volatile__ ("mcr p14, 0, %0, c0, c0, 0" : : "r" (val)); - } else { - /* bits 4-23 are write-as-0, 24-31 are write ignored */ - val &= 0xf; - __asm__ __volatile__ ("mcr p14, 0, %0, c0, c1, 0" : : "r" (val)); - } -} - -static u32 read_pmnc(void) -{ - u32 val; - - if (pmu->id == PMU_XSC1) - __asm__ __volatile__ ("mrc p14, 0, %0, c0, c0, 0" : "=r" (val)); - else { - __asm__ __volatile__ ("mrc p14, 0, %0, c0, c1, 0" : "=r" (val)); - /* bits 1-2 and 4-23 are read-unpredictable */ - val &= 0xff000009; - } - - return val; -} - -static u32 __xsc1_read_counter(int counter) -{ - u32 val = 0; - - switch (counter) { - case CCNT: - __asm__ __volatile__ ("mrc p14, 0, %0, c1, c0, 0" : "=r" (val)); - break; - case PMN0: - __asm__ __volatile__ ("mrc p14, 0, %0, c2, c0, 0" : "=r" (val)); - break; - case PMN1: - __asm__ __volatile__ ("mrc p14, 0, %0, c3, c0, 0" : "=r" (val)); - break; - } - return val; -} - -static u32 __xsc2_read_counter(int counter) -{ - u32 val = 0; - - switch (counter) { - case CCNT: - __asm__ __volatile__ ("mrc p14, 0, %0, c1, c1, 0" : "=r" (val)); - break; - case PMN0: - __asm__ __volatile__ ("mrc p14, 0, %0, c0, c2, 0" : "=r" (val)); - break; - case PMN1: - __asm__ __volatile__ ("mrc p14, 0, %0, c1, c2, 0" : "=r" (val)); - break; - case PMN2: - __asm__ __volatile__ ("mrc p14, 0, %0, c2, c2, 0" : "=r" (val)); - break; - case PMN3: - __asm__ __volatile__ ("mrc p14, 0, %0, c3, c2, 0" : "=r" (val)); - break; - } - return val; -} - -static u32 read_counter(int counter) -{ - u32 val; - - if (pmu->id == PMU_XSC1) - val = __xsc1_read_counter(counter); - else - val = __xsc2_read_counter(counter); - - return val; -} - -static void __xsc1_write_counter(int counter, u32 val) -{ - switch (counter) { - case CCNT: - __asm__ __volatile__ ("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); - break; - case PMN0: - __asm__ __volatile__ ("mcr p14, 0, %0, c2, c0, 0" : : "r" (val)); - break; - case PMN1: - __asm__ __volatile__ ("mcr p14, 0, %0, c3, c0, 0" : : "r" (val)); - break; - } -} - -static void __xsc2_write_counter(int counter, u32 val) -{ - switch (counter) { - case CCNT: - __asm__ __volatile__ ("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); - break; - case PMN0: - __asm__ __volatile__ ("mcr p14, 0, %0, c0, c2, 0" : : "r" (val)); - break; - case PMN1: - __asm__ __volatile__ ("mcr p14, 0, %0, c1, c2, 0" : : "r" (val)); - break; - case PMN2: - __asm__ __volatile__ ("mcr p14, 0, %0, c2, c2, 0" : : "r" (val)); - break; - case PMN3: - __asm__ __volatile__ ("mcr p14, 0, %0, c3, c2, 0" : : "r" (val)); - break; - } -} - -static void write_counter(int counter, u32 val) -{ - if (pmu->id == PMU_XSC1) - __xsc1_write_counter(counter, val); - else - __xsc2_write_counter(counter, val); -} - -static int xscale_setup_ctrs(void) -{ - u32 evtsel, pmnc; - int i; - - for (i = CCNT; i < MAX_COUNTERS; i++) { - if (counter_config[i].enabled) - continue; - - counter_config[i].event = EVT_UNUSED; - } - - switch (pmu->id) { - case PMU_XSC1: - pmnc = (counter_config[PMN1].event << 20) | (counter_config[PMN0].event << 12); - pr_debug("xscale_setup_ctrs: pmnc: %#08x\n", pmnc); - write_pmnc(pmnc); - break; - - case PMU_XSC2: - evtsel = counter_config[PMN0].event | (counter_config[PMN1].event << 8) | - (counter_config[PMN2].event << 16) | (counter_config[PMN3].event << 24); - - pr_debug("xscale_setup_ctrs: evtsel %#08x\n", evtsel); - __asm__ __volatile__ ("mcr p14, 0, %0, c8, c1, 0" : : "r" (evtsel)); - break; - } - - for (i = CCNT; i < MAX_COUNTERS; i++) { - if (counter_config[i].event == EVT_UNUSED) { - counter_config[i].event = 0; - pmu->int_enable &= ~pmu->int_mask[i]; - continue; - } - - results[i].reset_counter = counter_config[i].count; - write_counter(i, -(u32)counter_config[i].count); - pmu->int_enable |= pmu->int_mask[i]; - pr_debug("xscale_setup_ctrs: counter%d %#08x from %#08lx\n", i, - read_counter(i), counter_config[i].count); - } - - return 0; -} - -static void inline __xsc1_check_ctrs(void) -{ - int i; - u32 pmnc = read_pmnc(); - - /* NOTE: there's an A stepping errata that states if an overflow */ - /* bit already exists and another occurs, the previous */ - /* Overflow bit gets cleared. There's no workaround. */ - /* Fixed in B stepping or later */ - - /* Write the value back to clear the overflow flags. Overflow */ - /* flags remain in pmnc for use below */ - write_pmnc(pmnc & ~PMU_ENABLE); - - for (i = CCNT; i <= PMN1; i++) { - if (!(pmu->int_mask[i] & pmu->int_enable)) - continue; - - if (pmnc & pmu->cnt_ovf[i]) - results[i].ovf++; - } -} - -static void inline __xsc2_check_ctrs(void) -{ - int i; - u32 flag = 0, pmnc = read_pmnc(); - - pmnc &= ~PMU_ENABLE; - write_pmnc(pmnc); - - /* read overflow flag register */ - __asm__ __volatile__ ("mrc p14, 0, %0, c5, c1, 0" : "=r" (flag)); - - for (i = CCNT; i <= PMN3; i++) { - if (!(pmu->int_mask[i] & pmu->int_enable)) - continue; - - if (flag & pmu->cnt_ovf[i]) - results[i].ovf++; - } - - /* writeback clears overflow bits */ - __asm__ __volatile__ ("mcr p14, 0, %0, c5, c1, 0" : : "r" (flag)); -} - -static irqreturn_t xscale_pmu_interrupt(int irq, void *arg) -{ - int i; - u32 pmnc; - - if (pmu->id == PMU_XSC1) - __xsc1_check_ctrs(); - else - __xsc2_check_ctrs(); - - for (i = CCNT; i < MAX_COUNTERS; i++) { - if (!results[i].ovf) - continue; - - write_counter(i, -(u32)results[i].reset_counter); - oprofile_add_sample(get_irq_regs(), i); - results[i].ovf--; - } - - pmnc = read_pmnc() | PMU_ENABLE; - write_pmnc(pmnc); - - return IRQ_HANDLED; -} - -static const struct pmu_irqs *pmu_irqs; - -static void xscale_pmu_stop(void) -{ - u32 pmnc = read_pmnc(); - - pmnc &= ~PMU_ENABLE; - write_pmnc(pmnc); - - free_irq(pmu_irqs->irqs[0], results); - release_pmu(pmu_irqs); - pmu_irqs = NULL; -} - -static int xscale_pmu_start(void) -{ - int ret; - u32 pmnc; - - pmu_irqs = reserve_pmu(); - if (IS_ERR(pmu_irqs)) - return PTR_ERR(pmu_irqs); - - pmnc = read_pmnc(); - - ret = request_irq(pmu_irqs->irqs[0], xscale_pmu_interrupt, - IRQF_DISABLED, "XScale PMU", (void *)results); - - if (ret < 0) { - printk(KERN_ERR "oprofile: unable to request IRQ%d for XScale PMU\n", - pmu_irqs->irqs[0]); - release_pmu(pmu_irqs); - pmu_irqs = NULL; - return ret; - } - - if (pmu->id == PMU_XSC1) - pmnc |= pmu->int_enable; - else { - __asm__ __volatile__ ("mcr p14, 0, %0, c4, c1, 0" : : "r" (pmu->int_enable)); - pmnc &= ~PMU_CNT64; - } - - pmnc |= PMU_ENABLE; - write_pmnc(pmnc); - pr_debug("xscale_pmu_start: pmnc: %#08x mask: %08x\n", pmnc, pmu->int_enable); - return 0; -} - -static int xscale_detect_pmu(void) -{ - int ret = 0; - u32 id; - - id = (read_cpuid(CPUID_ID) >> 13) & 0x7; - - switch (id) { - case 1: - pmu = &pmu_parms[PMU_XSC1]; - break; - case 2: - pmu = &pmu_parms[PMU_XSC2]; - break; - default: - ret = -ENODEV; - break; - } - - if (!ret) { - op_xscale_spec.name = pmu->name; - op_xscale_spec.num_counters = pmu->num_counters; - pr_debug("xscale_detect_pmu: detected %s PMU\n", pmu->name); - } - - return ret; -} - -struct op_arm_model_spec op_xscale_spec = { - .init = xscale_detect_pmu, - .setup_ctrs = xscale_setup_ctrs, - .start = xscale_pmu_start, - .stop = xscale_pmu_stop, -}; - diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile index 36bff0325959..69b09c1cec8b 100644 --- a/arch/arm/plat-iop/Makefile +++ b/arch/arm/plat-iop/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_ARCH_IOP32X) += time.o obj-$(CONFIG_ARCH_IOP32X) += io.o obj-$(CONFIG_ARCH_IOP32X) += cp6.o obj-$(CONFIG_ARCH_IOP32X) += adma.o +obj-$(CONFIG_ARCH_IOP32X) += pmu.o # IOP33X obj-$(CONFIG_ARCH_IOP33X) += gpio.o @@ -23,6 +24,7 @@ obj-$(CONFIG_ARCH_IOP33X) += time.o obj-$(CONFIG_ARCH_IOP33X) += io.o obj-$(CONFIG_ARCH_IOP33X) += cp6.o obj-$(CONFIG_ARCH_IOP33X) += adma.o +obj-$(CONFIG_ARCH_IOP33X) += pmu.o # IOP13XX obj-$(CONFIG_ARCH_IOP13XX) += cp6.o diff --git a/arch/arm/plat-iop/pmu.c b/arch/arm/plat-iop/pmu.c new file mode 100644 index 000000000000..a2024b8685a1 --- /dev/null +++ b/arch/arm/plat-iop/pmu.c @@ -0,0 +1,40 @@ +/* + * PMU IRQ registration for the iop3xx xscale PMU families. + * Copyright (C) 2010 Will Deacon, ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> +#include <asm/pmu.h> +#include <mach/irqs.h> + +static struct resource pmu_resource = { +#ifdef CONFIG_ARCH_IOP32X + .start = IRQ_IOP32X_CORE_PMU, + .end = IRQ_IOP32X_CORE_PMU, +#endif +#ifdef CONFIG_ARCH_IOP33X + .start = IRQ_IOP33X_CORE_PMU, + .end = IRQ_IOP33X_CORE_PMU, +#endif + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .resource = &pmu_resource, + .num_resources = 1, +}; + +static int __init iop3xx_pmu_init(void) +{ + platform_device_register(&pmu_device); + return 0; +} + +arch_initcall(iop3xx_pmu_init); diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig index 159daf583f85..5da3f97c537b 100644 --- a/arch/arm/plat-nomadik/Kconfig +++ b/arch/arm/plat-nomadik/Kconfig @@ -19,4 +19,9 @@ config HAS_MTU to multiple interrupt generating programmable 32-bit free running decrementing counters. +config NOMADIK_GPIO + bool + help + Support for the Nomadik GPIO controller. + endif diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile index 37c7cdd0f8f0..c33547361bd7 100644 --- a/arch/arm/plat-nomadik/Makefile +++ b/arch/arm/plat-nomadik/Makefile @@ -3,3 +3,4 @@ # Licensed under GPLv2 obj-$(CONFIG_HAS_MTU) += timer.o +obj-$(CONFIG_NOMADIK_GPIO) += gpio.o diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index 66b1c91ccc74..5a6ef252c38b 100644 --- a/arch/arm/mach-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -13,8 +13,10 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/device.h> -#include <linux/amba/bus.h> +#include <linux/platform_device.h> #include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> #include <linux/gpio.h> #include <linux/spinlock.h> #include <linux/interrupt.h> @@ -36,8 +38,9 @@ struct nmk_gpio_chip { struct gpio_chip chip; void __iomem *addr; + struct clk *clk; unsigned int parent_irq; - spinlock_t *lock; + spinlock_t lock; /* Keep track of configured edges */ u32 edge_rising; u32 edge_falling; @@ -108,40 +111,37 @@ static void nmk_gpio_irq_ack(unsigned int irq) writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC); } -static void nmk_gpio_irq_mask(unsigned int irq) +static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, + int gpio, bool enable) { - int gpio; - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - u32 bitmask, reg; - - gpio = NOMADIK_IRQ_TO_GPIO(irq); - nmk_chip = get_irq_chip_data(irq); - bitmask = nmk_gpio_get_bitmask(gpio); - if (!nmk_chip) - return; + u32 bitmask = nmk_gpio_get_bitmask(gpio); + u32 reg; - /* we must individually clear the two edges */ - spin_lock_irqsave(&nmk_chip->lock, flags); + /* we must individually set/clear the two edges */ if (nmk_chip->edge_rising & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC); - reg &= ~bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC); + reg = readl(nmk_chip->addr + NMK_GPIO_RIMSC); + if (enable) + reg |= bitmask; + else + reg &= ~bitmask; + writel(reg, nmk_chip->addr + NMK_GPIO_RIMSC); } if (nmk_chip->edge_falling & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC); - reg &= ~bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC); + reg = readl(nmk_chip->addr + NMK_GPIO_FIMSC); + if (enable) + reg |= bitmask; + else + reg &= ~bitmask; + writel(reg, nmk_chip->addr + NMK_GPIO_FIMSC); } - spin_unlock_irqrestore(&nmk_chip->lock, flags); -}; +} -static void nmk_gpio_irq_unmask(unsigned int irq) +static void nmk_gpio_irq_modify(unsigned int irq, bool enable) { int gpio; struct nmk_gpio_chip *nmk_chip; unsigned long flags; - u32 bitmask, reg; + u32 bitmask; gpio = NOMADIK_IRQ_TO_GPIO(irq); nmk_chip = get_irq_chip_data(irq); @@ -149,23 +149,24 @@ static void nmk_gpio_irq_unmask(unsigned int irq) if (!nmk_chip) return; - /* we must individually set the two edges */ spin_lock_irqsave(&nmk_chip->lock, flags); - if (nmk_chip->edge_rising & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC); - reg |= bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC); - } - if (nmk_chip->edge_falling & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC); - reg |= bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC); - } + __nmk_gpio_irq_modify(nmk_chip, gpio, enable); spin_unlock_irqrestore(&nmk_chip->lock, flags); } +static void nmk_gpio_irq_mask(unsigned int irq) +{ + nmk_gpio_irq_modify(irq, false); +}; + +static void nmk_gpio_irq_unmask(unsigned int irq) +{ + nmk_gpio_irq_modify(irq, true); +} + static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) { + bool enabled = !(irq_to_desc(irq)->status & IRQ_DISABLED); int gpio; struct nmk_gpio_chip *nmk_chip; unsigned long flags; @@ -184,19 +185,21 @@ static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) spin_lock_irqsave(&nmk_chip->lock, flags); + if (enabled) + __nmk_gpio_irq_modify(nmk_chip, gpio, false); + nmk_chip->edge_rising &= ~bitmask; if (type & IRQ_TYPE_EDGE_RISING) nmk_chip->edge_rising |= bitmask; - writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC); nmk_chip->edge_falling &= ~bitmask; if (type & IRQ_TYPE_EDGE_FALLING) nmk_chip->edge_falling |= bitmask; - writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC); - spin_unlock_irqrestore(&nmk_chip->lock, flags); + if (enabled) + __nmk_gpio_irq_modify(nmk_chip, gpio, true); - nmk_gpio_irq_unmask(irq); + spin_unlock_irqrestore(&nmk_chip->lock, flags); return 0; } @@ -212,21 +215,27 @@ static struct irq_chip nmk_gpio_irq_chip = { static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) { struct nmk_gpio_chip *nmk_chip; - struct irq_chip *host_chip; + struct irq_chip *host_chip = get_irq_chip(irq); unsigned int gpio_irq; u32 pending; unsigned int first_irq; + if (host_chip->mask_ack) + host_chip->mask_ack(irq); + else { + host_chip->mask(irq); + if (host_chip->ack) + host_chip->ack(irq); + } + nmk_chip = get_irq_data(irq); first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) { gpio_irq = first_irq + __ffs(pending); generic_handle_irq(gpio_irq); } - if (0) {/* don't ack parent irq, as ack == disable */ - host_chip = get_irq_chip(irq); - host_chip->ack(irq); - } + + host_chip->unmask(irq); } static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) @@ -240,6 +249,7 @@ static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) set_irq_handler(i, handle_edge_irq); set_irq_flags(i, IRQF_VALID); set_irq_chip_data(i, nmk_chip); + set_irq_type(i, IRQ_TYPE_EDGE_FALLING); } set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); set_irq_data(nmk_chip->parent_irq, nmk_chip); @@ -298,30 +308,59 @@ static struct gpio_chip nmk_gpio_template = { .can_sleep = 0, }; -static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id) +static int __init nmk_gpio_probe(struct platform_device *dev) { - struct nmk_gpio_platform_data *pdata; + struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; struct nmk_gpio_chip *nmk_chip; struct gpio_chip *chip; + struct resource *res; + struct clk *clk; + int irq; int ret; - pdata = dev->dev.platform_data; - ret = amba_request_regions(dev, pdata->name); - if (ret) - return ret; + if (!pdata) + return -ENODEV; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENOENT; + goto out; + } + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + ret = irq; + goto out; + } + + if (request_mem_region(res->start, resource_size(res), + dev_name(&dev->dev)) == NULL) { + ret = -EBUSY; + goto out; + } + + clk = clk_get(&dev->dev, NULL); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto out_release; + } + + clk_enable(clk); nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL); if (!nmk_chip) { ret = -ENOMEM; - goto out_amba; + goto out_clk; } /* * The virt address in nmk_chip->addr is in the nomadik register space, * so we can simply convert the resource address, without remapping */ - nmk_chip->addr = io_p2v(dev->res.start); + nmk_chip->clk = clk; + nmk_chip->addr = io_p2v(res->start); nmk_chip->chip = nmk_gpio_template; - nmk_chip->parent_irq = pdata->parent_irq; + nmk_chip->parent_irq = irq; + spin_lock_init(&nmk_chip->lock); chip = &nmk_chip->chip; chip->base = pdata->first_gpio; @@ -333,7 +372,7 @@ static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id) if (ret) goto out_free; - amba_set_drvdata(dev, nmk_chip); + platform_set_drvdata(dev, nmk_chip); nmk_gpio_init_irq(nmk_chip); @@ -341,51 +380,50 @@ static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id) nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr); return 0; - out_free: +out_free: kfree(nmk_chip); - out_amba: - amba_release_regions(dev); +out_clk: + clk_disable(clk); + clk_put(clk); +out_release: + release_mem_region(res->start, resource_size(res)); +out: dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret, pdata->first_gpio, pdata->first_gpio+31); return ret; } -static int nmk_gpio_remove(struct amba_device *dev) +static int __exit nmk_gpio_remove(struct platform_device *dev) { struct nmk_gpio_chip *nmk_chip; + struct resource *res; - nmk_chip = amba_get_drvdata(dev); + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + + nmk_chip = platform_get_drvdata(dev); gpiochip_remove(&nmk_chip->chip); + clk_disable(nmk_chip->clk); + clk_put(nmk_chip->clk); kfree(nmk_chip); - amba_release_regions(dev); + release_mem_region(res->start, resource_size(res)); return 0; } -/* We have 0x1f080060 and 0x1f180060, accept both using the mask */ -static struct amba_id nmk_gpio_ids[] = { - { - .id = 0x1f080060, - .mask = 0xffefffff, - }, - {0, 0}, -}; - -static struct amba_driver nmk_gpio_driver = { - .drv = { +static struct platform_driver nmk_gpio_driver = { + .driver = { .owner = THIS_MODULE, .name = "gpio", }, .probe = nmk_gpio_probe, - .remove = nmk_gpio_remove, + .remove = __exit_p(nmk_gpio_remove), .suspend = NULL, /* to be done */ .resume = NULL, - .id_table = nmk_gpio_ids, }; static int __init nmk_gpio_init(void) { - return amba_driver_register(&nmk_gpio_driver); + return platform_driver_register(&nmk_gpio_driver); } arch_initcall(nmk_gpio_init); diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h new file mode 100644 index 000000000000..4200811249ca --- /dev/null +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -0,0 +1,70 @@ +/* + * Structures and registers for GPIO access in the Nomadik SoC + * + * Copyright (C) 2008 STMicroelectronics + * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> + * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_PLAT_GPIO_H +#define __ASM_PLAT_GPIO_H + +#include <asm-generic/gpio.h> + +/* + * These currently cause a function call to happen, they may be optimized + * if needed by adding cpu-specific defines to identify blocks + * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc) + */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* + * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving + * the "gpio" namespace for generic and cross-machine functions + */ + +/* Register in the logic block */ +#define NMK_GPIO_DAT 0x00 +#define NMK_GPIO_DATS 0x04 +#define NMK_GPIO_DATC 0x08 +#define NMK_GPIO_PDIS 0x0c +#define NMK_GPIO_DIR 0x10 +#define NMK_GPIO_DIRS 0x14 +#define NMK_GPIO_DIRC 0x18 +#define NMK_GPIO_SLPC 0x1c +#define NMK_GPIO_AFSLA 0x20 +#define NMK_GPIO_AFSLB 0x24 + +#define NMK_GPIO_RIMSC 0x40 +#define NMK_GPIO_FIMSC 0x44 +#define NMK_GPIO_IS 0x48 +#define NMK_GPIO_IC 0x4c +#define NMK_GPIO_RWIMSC 0x50 +#define NMK_GPIO_FWIMSC 0x54 +#define NMK_GPIO_WKS 0x58 + +/* Alternate functions: function C is set in hw by setting both A and B */ +#define NMK_GPIO_ALT_GPIO 0 +#define NMK_GPIO_ALT_A 1 +#define NMK_GPIO_ALT_B 2 +#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) + +extern int nmk_gpio_set_mode(int gpio, int gpio_mode); +extern int nmk_gpio_get_mode(int gpio); + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ +struct nmk_gpio_platform_data { + char *name; + int first_gpio; + int first_irq; +}; + +#endif /* __ASM_PLAT_GPIO_H */ diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index fa7cb3a57cbf..0ff3798769ab 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -2,7 +2,7 @@ * linux/arch/arm/mach-nomadik/timer.c * * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x + * Copyright (C) 2010 Alessandro Rubini * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, as @@ -18,123 +18,150 @@ #include <plat/mtu.h> -static u32 nmdk_count; /* accumulated count */ -static u32 nmdk_cycle; /* write-once */ - -/* setup by the platform code */ -void __iomem *mtu_base; +void __iomem *mtu_base; /* ssigned by machine code */ /* - * clocksource: the MTU device is a decrementing counters, so we negate - * the value being read. + * Kernel assumes that sched_clock can be called early + * but the MTU may not yet be initialized. */ -static cycle_t nmdk_read_timer(struct clocksource *cs) +static cycle_t nmdk_read_timer_dummy(struct clocksource *cs) { - u32 count = readl(mtu_base + MTU_VAL(0)); - return nmdk_count + nmdk_cycle - count; + return 0; +} +/* clocksource: MTU decrements, so we negate the value being read. */ +static cycle_t nmdk_read_timer(struct clocksource *cs) +{ + return -readl(mtu_base + MTU_VAL(0)); } static struct clocksource nmdk_clksrc = { .name = "mtu_0", - .rating = 120, - .read = nmdk_read_timer, + .rating = 200, + .read = nmdk_read_timer_dummy, + .mask = CLOCKSOURCE_MASK(32), .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; /* - * Clockevent device: currently only periodic mode is supported + * Override the global weak sched_clock symbol with this + * local implementation which uses the clocksource to get some + * better resolution when scheduling the kernel. We accept that + * this wraps around for now, since it is just a relative time + * stamp. (Inspired by OMAP implementation.) */ +unsigned long long notrace sched_clock(void) +{ + return clocksource_cyc2ns(nmdk_clksrc.read( + &nmdk_clksrc), + nmdk_clksrc.mult, + nmdk_clksrc.shift); +} + +/* Clockevent device: use one-shot mode */ static void nmdk_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) { + u32 cr; + switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* count current value? */ - writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC); + pr_err("%s: periodic mode not supported\n", __func__); break; case CLOCK_EVT_MODE_ONESHOT: - BUG(); /* Not supported, yet */ - /* FALLTHROUGH */ + /* Load highest value, enable device, enable interrupts */ + cr = readl(mtu_base + MTU_CR(1)); + writel(0, mtu_base + MTU_LR(1)); + writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1)); + writel(0x2, mtu_base + MTU_IMSC); + break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: - writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC); + /* disable irq */ + writel(0, mtu_base + MTU_IMSC); break; case CLOCK_EVT_MODE_RESUME: break; } } +static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) +{ + /* writing the value has immediate effect */ + writel(evt, mtu_base + MTU_LR(1)); + return 0; +} + static struct clock_event_device nmdk_clkevt = { - .name = "mtu_0", - .features = CLOCK_EVT_FEAT_PERIODIC, + .name = "mtu_1", + .features = CLOCK_EVT_FEAT_ONESHOT, .shift = 32, - .rating = 100, + .rating = 200, .set_mode = nmdk_clkevt_mode, + .set_next_event = nmdk_clkevt_next, }; /* - * IRQ Handler for the timer 0 of the MTU block. The irq is not shared - * as we are the only users of mtu0 by now. + * IRQ Handler for timer 1 of the MTU block. */ static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) { - /* ack: "interrupt clear register" */ - writel(1 << 0, mtu_base + MTU_ICR); - - /* we can't count lost ticks, unfortunately */ - nmdk_count += nmdk_cycle; - nmdk_clkevt.event_handler(&nmdk_clkevt); + struct clock_event_device *evdev = dev_id; + writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */ + evdev->event_handler(evdev); return IRQ_HANDLED; } -/* - * Set up timer interrupt, and return the current time in seconds. - */ static struct irqaction nmdk_timer_irq = { .name = "Nomadik Timer Tick", .flags = IRQF_DISABLED | IRQF_TIMER, .handler = nmdk_timer_interrupt, + .dev_id = &nmdk_clkevt, }; -static void nmdk_timer_reset(void) -{ - u32 cr; - - writel(0, mtu_base + MTU_CR(0)); /* off */ - - /* configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(0)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); - cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS; - writel(cr, mtu_base + MTU_CR(0)); - writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); -} - void __init nmdk_timer_init(void) { unsigned long rate; - int bits; - - rate = CLOCK_TICK_RATE; /* 2.4MHz */ - nmdk_cycle = (rate + HZ/2) / HZ; + u32 cr = MTU_CRn_32BITS;; + + /* + * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500: + * use a divide-by-16 counter if it's more than 16MHz + */ + rate = CLOCK_TICK_RATE; + if (rate > 16 << 20) { + rate /= 16; + cr |= MTU_CRn_PRESCALE_16; + } else { + cr |= MTU_CRn_PRESCALE_1; + } - /* Init the timer and register clocksource */ - nmdk_timer_reset(); + /* Timer 0 is the free running clocksource */ + writel(cr, mtu_base + MTU_CR(0)); + writel(0, mtu_base + MTU_LR(0)); + writel(0, mtu_base + MTU_BGLR(0)); + writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift); - bits = 8*sizeof(nmdk_count); - nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits); + /* Now the scheduling clock is ready */ + nmdk_clksrc.read = nmdk_read_timer; if (clocksource_register(&nmdk_clksrc)) - printk(KERN_ERR "timer: failed to initialize clock " - "source %s\n", nmdk_clksrc.name); + pr_err("timer: failed to initialize clock source %s\n", + nmdk_clksrc.name); + + /* Timer 1 is used for events, fix according to rate */ + writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ + nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); + nmdk_clkevt.max_delta_ns = + clockevent_delta2ns(0xffffffff, &nmdk_clkevt); + nmdk_clkevt.min_delta_ns = + clockevent_delta2ns(0x00000002, &nmdk_clkevt); + nmdk_clkevt.cpumask = cpumask_of(0); /* Register irq and clockevents */ setup_irq(IRQ_MTU0, &nmdk_timer_irq); - nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); - nmdk_clkevt.cpumask = cpumask_of(0); clockevents_register_device(&nmdk_clkevt); } diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig index b158e98038ed..da53395a17c6 100644 --- a/arch/arm/plat-pxa/Kconfig +++ b/arch/arm/plat-pxa/Kconfig @@ -1,3 +1,8 @@ if PLAT_PXA +config PXA_SSP + tristate + help + Enable support for PXA2xx SSP ports + endif diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 0264bfb0ca4f..6187edfbcb77 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -2,10 +2,11 @@ # Makefile for code common across different PXA processor families # -obj-y := dma.o +obj-y := dma.o pmu.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o obj-$(CONFIG_HAVE_PWM) += pwm.o +obj-$(CONFIG_PXA_SSP) += ssp.o diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 857a6839071c..9e604c80618f 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -316,6 +316,13 @@ enum { MFP_PIN_PMIC_INT, MFP_PIN_RDY, + /* additional pins on MMP2 */ + MFP_PIN_TWSI1_SCL, + MFP_PIN_TWSI1_SDA, + MFP_PIN_TWSI4_SCL, + MFP_PIN_TWSI4_SDA, + MFP_PIN_CLK_REQ, + MFP_PIN_MAX, }; diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/plat-pxa/include/plat/ssp.h index 6a2ed35acd59..fe43150690ed 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ssp.h +++ b/arch/arm/plat-pxa/include/plat/ssp.h @@ -1,5 +1,26 @@ -#ifndef __ASM_ARCH_REGS_SSP_H -#define __ASM_ARCH_REGS_SSP_H +/* + * ssp.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver supports the following PXA CPU/SSP ports:- + * + * PXA250 SSP + * PXA255 SSP, NSSP + * PXA26x SSP, NSSP, ASSP + * PXA27x SSP1, SSP2, SSP3 + * PXA3xx SSP1, SSP2, SSP3, SSP4 + */ + +#ifndef __ASM_ARCH_SSP_H +#define __ASM_ARCH_SSP_H + +#include <linux/list.h> +#include <linux/io.h> /* * SSP Serial Port Registers @@ -19,10 +40,7 @@ #define SSRSA (0x34) /* SSP Rx Timeslot Active */ #define SSTSS (0x38) /* SSP Timeslot Status */ #define SSACD (0x3C) /* SSP Audio Clock Divider */ - -#if defined(CONFIG_PXA3xx) #define SSACDD (0x40) /* SSP Audio Clock Dither Divider */ -#endif /* Common PXA2xx bits first */ #define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ @@ -33,29 +51,19 @@ #define SSCR0_National (0x2 << 4) /* National Microwire */ #define SSCR0_ECS (1 << 6) /* External clock select */ #define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ +#define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */ -#if defined(CONFIG_PXA25x) -#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ -#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ -#endif - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +/* PXA27x, PXA3xx */ #define SSCR0_EDSS (1 << 20) /* Extended data size select */ #define SSCR0_NCS (1 << 21) /* Network clock select */ #define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ #define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ #define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ +#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ #define SSCR0_ACS (1 << 30) /* Audio clock select */ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ -#endif -#if defined(CONFIG_PXA3xx) -#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ -#endif #define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ #define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ @@ -75,10 +83,6 @@ #define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ #define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ -#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ -#define SSCR0_NCS (1 << 21) /* Network Clock Select */ -#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ /* extra bits in PXA255, PXA26x and PXA27x SSP ports */ #define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ @@ -108,27 +112,75 @@ #define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ #define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ -#if defined(CONFIG_PXA3xx) -#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ -#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ -#endif -#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ -#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ -#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ -#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ -#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ -#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ -#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ -#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ #define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ +#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ +#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ +#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ +#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ +#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ +#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ +#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ +#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ + +/* PXA3xx */ +#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ +#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ +#define SSPSP_TIMING_MASK (0x7f8001f0) #define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ #define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ #define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ -#if defined(CONFIG_PXA3xx) #define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ -#endif - -#endif /* __ASM_ARCH_REGS_SSP_H */ +enum pxa_ssp_type { + SSP_UNDEFINED = 0, + PXA25x_SSP, /* pxa 210, 250, 255, 26x */ + PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ + PXA27x_SSP, + PXA168_SSP, +}; + +struct ssp_device { + struct platform_device *pdev; + struct list_head node; + + struct clk *clk; + void __iomem *mmio_base; + unsigned long phys_base; + + const char *label; + int port_id; + int type; + int use_count; + int irq; + int drcmr_rx; + int drcmr_tx; +}; + +/** + * pxa_ssp_write_reg - Write to a SSP register + * + * @dev: SSP device to access + * @reg: Register to write to + * @val: Value to be written. + */ +static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val) +{ + __raw_writel(val, dev->mmio_base + reg); +} + +/** + * pxa_ssp_read_reg - Read from a SSP register + * + * @dev: SSP device to access + * @reg: Register to read from + */ +static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg) +{ + return __raw_readl(dev->mmio_base + reg); +} + +struct ssp_device *pxa_ssp_request(int port, const char *label); +void pxa_ssp_free(struct ssp_device *); +#endif /* __ASM_ARCH_SSP_H */ diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index be58f9fe65b0..b77e018d36c1 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -110,6 +110,7 @@ static const unsigned long mfpr_lpm[] = { MFPR_LPM_PULL_LOW, MFPR_LPM_PULL_HIGH, MFPR_LPM_FLOAT, + MFPR_LPM_INPUT, }; /* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */ diff --git a/arch/arm/plat-pxa/pmu.c b/arch/arm/plat-pxa/pmu.c new file mode 100644 index 000000000000..267ceb6feb2f --- /dev/null +++ b/arch/arm/plat-pxa/pmu.c @@ -0,0 +1,33 @@ +/* + * PMU IRQ registration for the PXA xscale PMU families. + * Copyright (C) 2010 Will Deacon, ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> +#include <asm/pmu.h> +#include <mach/irqs.h> + +static struct resource pmu_resource = { + .start = IRQ_PMU, + .end = IRQ_PMU, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .resource = &pmu_resource, + .num_resources = 1, +}; + +static int __init pxa_pmu_init(void) +{ + platform_device_register(&pmu_device); + return 0; +} +arch_initcall(pxa_pmu_init); diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c new file mode 100644 index 000000000000..c6357e554aba --- /dev/null +++ b/arch/arm/plat-pxa/ssp.c @@ -0,0 +1,224 @@ +/* + * linux/arch/arm/mach-pxa/ssp.c + * + * based on linux/arch/arm/mach-sa1100/ssp.c by Russell King + * + * Copyright (C) 2003 Russell King. + * Copyright (C) 2003 Wolfson Microelectronics PLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * PXA2xx SSP driver. This provides the generic core for simple + * IO-based SSP applications and allows easy port setup for DMA access. + * + * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/mutex.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <asm/irq.h> +#include <mach/hardware.h> +#include <plat/ssp.h> + +static DEFINE_MUTEX(ssp_lock); +static LIST_HEAD(ssp_list); + +struct ssp_device *pxa_ssp_request(int port, const char *label) +{ + struct ssp_device *ssp = NULL; + + mutex_lock(&ssp_lock); + + list_for_each_entry(ssp, &ssp_list, node) { + if (ssp->port_id == port && ssp->use_count == 0) { + ssp->use_count++; + ssp->label = label; + break; + } + } + + mutex_unlock(&ssp_lock); + + if (&ssp->node == &ssp_list) + return NULL; + + return ssp; +} +EXPORT_SYMBOL(pxa_ssp_request); + +void pxa_ssp_free(struct ssp_device *ssp) +{ + mutex_lock(&ssp_lock); + if (ssp->use_count) { + ssp->use_count--; + ssp->label = NULL; + } else + dev_err(&ssp->pdev->dev, "device already free\n"); + mutex_unlock(&ssp_lock); +} +EXPORT_SYMBOL(pxa_ssp_free); + +static int __devinit pxa_ssp_probe(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct resource *res; + struct ssp_device *ssp; + int ret = 0; + + ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL); + if (ssp == NULL) { + dev_err(&pdev->dev, "failed to allocate memory"); + return -ENOMEM; + } + ssp->pdev = pdev; + + ssp->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(ssp->clk)) { + ret = PTR_ERR(ssp->clk); + goto err_free; + } + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no SSP RX DRCMR defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + ssp->drcmr_rx = res->start; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (res == NULL) { + dev_err(&pdev->dev, "no SSP TX DRCMR defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + ssp->drcmr_tx = res->start; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + + res = request_mem_region(res->start, resource_size(res), + pdev->name); + if (res == NULL) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + ret = -EBUSY; + goto err_free_clk; + } + + ssp->phys_base = res->start; + + ssp->mmio_base = ioremap(res->start, resource_size(res)); + if (ssp->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -ENODEV; + goto err_free_mem; + } + + ssp->irq = platform_get_irq(pdev, 0); + if (ssp->irq < 0) { + dev_err(&pdev->dev, "no IRQ resource defined\n"); + ret = -ENODEV; + goto err_free_io; + } + + /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id + * starts from 0, do a translation here + */ + ssp->port_id = pdev->id + 1; + ssp->use_count = 0; + ssp->type = (int)id->driver_data; + + mutex_lock(&ssp_lock); + list_add(&ssp->node, &ssp_list); + mutex_unlock(&ssp_lock); + + platform_set_drvdata(pdev, ssp); + return 0; + +err_free_io: + iounmap(ssp->mmio_base); +err_free_mem: + release_mem_region(res->start, resource_size(res)); +err_free_clk: + clk_put(ssp->clk); +err_free: + kfree(ssp); + return ret; +} + +static int __devexit pxa_ssp_remove(struct platform_device *pdev) +{ + struct resource *res; + struct ssp_device *ssp; + + ssp = platform_get_drvdata(pdev); + if (ssp == NULL) + return -ENODEV; + + iounmap(ssp->mmio_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + clk_put(ssp->clk); + + mutex_lock(&ssp_lock); + list_del(&ssp->node); + mutex_unlock(&ssp_lock); + + kfree(ssp); + return 0; +} + +static const struct platform_device_id ssp_id_table[] = { + { "pxa25x-ssp", PXA25x_SSP }, + { "pxa25x-nssp", PXA25x_NSSP }, + { "pxa27x-ssp", PXA27x_SSP }, + { "pxa168-ssp", PXA168_SSP }, + { }, +}; + +static struct platform_driver pxa_ssp_driver = { + .probe = pxa_ssp_probe, + .remove = __devexit_p(pxa_ssp_remove), + .driver = { + .owner = THIS_MODULE, + .name = "pxa2xx-ssp", + }, + .id_table = ssp_id_table, +}; + +static int __init pxa_ssp_init(void) +{ + return platform_driver_register(&pxa_ssp_driver); +} + +static void __exit pxa_ssp_exit(void) +{ + platform_driver_unregister(&pxa_ssp_driver); +} + +arch_initcall(pxa_ssp_init); +module_exit(pxa_ssp_exit); + +MODULE_DESCRIPTION("PXA SSP driver"); +MODULE_AUTHOR("Liam Girdwood"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 6e93ef8f3d43..3ce8f010b3c6 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -9,6 +9,7 @@ config PLAT_S3C24XX select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_DEVICE_NAND + select S3C_GPIO_CFG_S3C24XX help Base platform code for any Samsung S3C24XX device @@ -44,6 +45,12 @@ config S3C2410_CLOCK Clock code for the S3C2410, and similar processors which is currently includes the S3C2410, S3C2440, S3C2442. +config S3C2443_CLOCK + bool + help + Clock code for the S3C2443 and similar processors, which includes + the S3C2416 and S3C2450. + config S3C24XX_DCLK bool help diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index c2237c41141f..44aea8868f89 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o +obj-$(CONFIG_S3C2443_CLOCK) += s3c2443-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 9e0e20ad2e46..7b44d0c592b5 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -42,6 +42,7 @@ #include <plat/nand.h> #include <plat/common-smdk.h> +#include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/pm.h> @@ -185,10 +186,10 @@ void __init smdk_machine_init(void) { /* Configure the LEDs (even if we have no LED support)*/ - s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPF(4), 1); s3c2410_gpio_setpin(S3C2410_GPF(5), 1); diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 9ca64df35bf6..76d0858c3cbb 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -49,6 +49,7 @@ #include <plat/s3c2400.h> #include <plat/s3c2410.h> #include <plat/s3c2412.h> +#include <plat/s3c2416.h> #include <plat/s3c244x.h> #include <plat/s3c2443.h> @@ -57,6 +58,7 @@ static const char name_s3c2400[] = "S3C2400"; static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; +static const char name_s3c2416[] = "S3C2416/S3C2450"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; static const char name_s3c2442b[] = "S3C2442B"; @@ -137,6 +139,15 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2412_init, .name = name_s3c2412, }, + { /* a strange version of the s3c2416 */ + .idcode = 0x32450003, + .idmask = 0xffffffff, + .map_io = s3c2416_map_io, + .init_clocks = s3c2416_init_clocks, + .init_uarts = s3c2416_init_uarts, + .init = s3c2416_init, + .name = name_s3c2416, + }, { .idcode = 0x32443001, .idmask = 0xffffffff, @@ -170,6 +181,16 @@ static struct map_desc s3c_iodesc[] __initdata = { static unsigned long s3c24xx_read_idcode_v5(void) { +#if defined(CONFIG_CPU_S3C2416) + /* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */ + + u32 gs = __raw_readl(S3C24XX_GSTATUS1); + + /* test for s3c2416 or similar device */ + if ((gs >> 16) == 0x3245) + return gs; +#endif + #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) return __raw_readl(S3C2412_GSTATUS1); #else diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 5467470badfd..45126d3aafc6 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/gpio.c * - * Copyright (c) 2004-2005 Simtec Electronics + * Copyright (c) 2004-2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C24XX GPIO support @@ -20,12 +20,12 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> +#include <linux/gpio.h> #include <linux/io.h> #include <mach/hardware.h> @@ -34,123 +34,34 @@ #include <mach/regs-gpio.h> -void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long mask; - unsigned long con; - unsigned long flags; - - if (pin < S3C2410_GPIO_BANKB) { - mask = 1 << S3C2410_GPIO_OFFSET(pin); - } else { - mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; - } - - switch (function) { - case S3C2410_GPIO_LEAVE: - mask = 0; - function = 0; - break; - - case S3C2410_GPIO_INPUT: - case S3C2410_GPIO_OUTPUT: - case S3C2410_GPIO_SFN2: - case S3C2410_GPIO_SFN3: - if (pin < S3C2410_GPIO_BANKB) { - function -= 1; - function &= 1; - function <<= S3C2410_GPIO_OFFSET(pin); - } else { - function &= 3; - function <<= S3C2410_GPIO_OFFSET(pin)*2; - } - } - - /* modify the specified register wwith IRQs off */ - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - con &= ~mask; - con |= function; - - __raw_writel(con, base + 0x00); - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(s3c2410_gpio_cfgpin); - -unsigned int s3c2410_gpio_getcfg(unsigned int pin) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long val = __raw_readl(base); - - if (pin < S3C2410_GPIO_BANKB) { - val >>= S3C2410_GPIO_OFFSET(pin); - val &= 1; - val += 1; - } else { - val >>= S3C2410_GPIO_OFFSET(pin)*2; - val &= 3; - } - - return val | S3C2410_GPIO_INPUT; -} - -EXPORT_SYMBOL(s3c2410_gpio_getcfg); +/* gpiolib wrappers until these are totally eliminated */ void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); - unsigned long flags; - unsigned long up; + int ret; - if (pin < S3C2410_GPIO_BANKB) - return; + WARN_ON(to); /* should be none of these left */ - local_irq_save(flags); - - up = __raw_readl(base + 0x08); - up &= ~(1L << offs); - up |= to << offs; - __raw_writel(up, base + 0x08); + if (!to) { + /* if pull is enabled, try first with up, and if that + * fails, try using down */ - local_irq_restore(flags); + ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); + if (ret) + s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); + } else { + s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); + } } - EXPORT_SYMBOL(s3c2410_gpio_pullup); -int s3c2410_gpio_getpull(unsigned int pin) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); - - if (pin < S3C2410_GPIO_BANKB) - return -EINVAL; - - return (__raw_readl(base + 0x08) & (1L << offs)) ? 1 : 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_getpull); - void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); - unsigned long flags; - unsigned long dat; - - local_irq_save(flags); + /* do this via gpiolib until all users removed */ - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offs); - dat |= to << offs; - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); + gpio_request(pin, "temporary"); + gpio_set_value(pin, to); + gpio_free(pin); } EXPORT_SYMBOL(s3c2410_gpio_setpin); @@ -181,22 +92,3 @@ unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) } EXPORT_SYMBOL(s3c2410_modify_misccr); - -int s3c2410_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15)) - return -EINVAL; /* not valid interrupts */ - - if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7)) - return -EINVAL; /* not valid pin */ - - if (pin < S3C2410_GPF(4)) - return (pin - S3C2410_GPF(0)) + IRQ_EINT0; - - if (pin < S3C2410_GPG(0)) - return (pin - S3C2410_GPF(4)) + IRQ_EINT4; - - return (pin - S3C2410_GPG(0)) + IRQ_EINT8; -} - -EXPORT_SYMBOL(s3c2410_gpio_getirq); diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 4f0f11a6a677..4c0896f2572d 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/gpiolib.c * - * Copyright (c) 2008 Simtec Electronics + * Copyright (c) 2008-2010 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * @@ -21,6 +21,8 @@ #include <linux/gpio.h> #include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> #include <mach/hardware.h> #include <asm/irq.h> #include <plat/pm.h> @@ -77,10 +79,21 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) return IRQ_EINT8 + offset; } +static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { + .set_config = s3c_gpio_setcfg_s3c24xx_a, + .get_config = s3c_gpio_getcfg_s3c24xx_a, +}; + +struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, +}; + struct s3c_gpio_chip s3c24xx_gpios[] = { [0] = { .base = S3C2410_GPACON, .pm = __gpio_pm(&s3c_gpio_pm_1bit), + .config = &s3c24xx_gpiocfg_banka, .chip = { .base = S3C2410_GPA(0), .owner = THIS_MODULE, @@ -161,15 +174,58 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { .ngpio = 11, }, }, + /* GPIOS for the S3C2443 and later devices. */ + { + .base = S3C2440_GPJCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPJ(0), + .owner = THIS_MODULE, + .label = "GPIOJ", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPKCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPK(0), + .owner = THIS_MODULE, + .label = "GPIOK", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPLCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPL(0), + .owner = THIS_MODULE, + .label = "GPIOL", + .ngpio = 15, + }, + }, { + .base = S3C2443_GPMCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPM(0), + .owner = THIS_MODULE, + .label = "GPIOM", + .ngpio = 2, + }, + }, }; + static __init int s3c24xx_gpiolib_init(void) { struct s3c_gpio_chip *chip = s3c24xx_gpios; int gpn; - for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) + for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) { + if (!chip->config) + chip->config = &s3c24xx_gpiocfg_default; + s3c_gpiolib_add(chip); + } return 0; } diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h index 7ea8bffa7a9c..005729a1077a 100644 --- a/arch/arm/plat-s3c24xx/include/plat/pll.h +++ b/arch/arm/plat-s3c24xx/include/plat/pll.h @@ -35,3 +35,28 @@ s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk) return (unsigned int)fvco; } + +#define S3C2416_PLL_M_SHIFT (14) +#define S3C2416_PLL_P_SHIFT (5) +#define S3C2416_PLL_S_MASK (7) +#define S3C2416_PLL_M_MASK ((1 << 10) - 1) +#define S3C2416_PLL_P_MASK (63) + +static inline unsigned int +s3c2416_get_pll(unsigned int pllval, unsigned int baseclk) +{ + unsigned int m, p, s; + uint64_t fvco; + + m = pllval >> S3C2416_PLL_M_SHIFT; + p = pllval >> S3C2416_PLL_P_SHIFT; + + s = pllval & S3C2416_PLL_S_MASK; + m &= S3C2416_PLL_M_MASK; + p &= S3C2416_PLL_P_MASK; + + fvco = (uint64_t)baseclk * m; + do_div(fvco, (p << s)); + + return (unsigned int)fvco; +} diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h new file mode 100644 index 000000000000..dc3c0907d221 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h @@ -0,0 +1,31 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h + * + * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com> + * + * Header file for s3c2416 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2416 + +struct s3c2410_uartcfg; + +extern int s3c2416_init(void); + +extern void s3c2416_map_io(void); + +extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2416_init_clocks(int xtal); + +extern int s3c2416_baseclk_add(void); + +#else +#define s3c2416_init_clocks NULL +#define s3c2416_init_uarts NULL +#define s3c2416_map_io NULL +#define s3c2416_init NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h index 815b107ed890..a19715feb798 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h @@ -30,3 +30,22 @@ extern int s3c2443_baseclk_add(void); #define s3c2443_map_io NULL #define s3c2443_init NULL #endif + +/* common code used by s3c2443 and others. + * note, not to be used outside of arch/arm/mach-s3c* */ + +struct clk; /* some files don't need clk.h otherwise */ + +typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base); +typedef unsigned int (*fdiv_fn)(unsigned long clkcon0); + +extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv); +extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv); + +extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); + +extern struct clksrc_clk clk_epllref; +extern struct clksrc_clk clk_esysclk; +extern struct clksrc_clk clk_msysclk; diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 3620dd299095..60627e63a254 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -43,6 +43,7 @@ #include <asm/mach/time.h> +#include <plat/gpio-cfg.h> #include <plat/pm.h> #define PFX "s3c24xx-pm: " @@ -90,22 +91,22 @@ static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) { unsigned long irqstate; unsigned long pinstate; - int irq = s3c2410_gpio_getirq(pin); + int irq = gpio_to_irq(pin); if (irqoffs < 4) irqstate = s3c_irqwake_intmask & (1L<<irqoffs); else irqstate = s3c_irqwake_eintmask & (1L<<irqoffs); - pinstate = s3c2410_gpio_getcfg(pin); + pinstate = s3c_gpio_getcfg(pin); if (!irqstate) { if (pinstate == S3C2410_GPIO_IRQ) - S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); + S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin); } else { if (pinstate == S3C2410_GPIO_IRQ) { S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin); - s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); } } } diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c index b61bdb793734..9ecc5d913679 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c @@ -87,7 +87,7 @@ static int s3c2410_upll_enable(struct clk *clk, int enable) /* standard clock definitions */ -static struct clk init_clocks_disable[] = { +static struct clk init_clocks_off[] = { { .name = "nand", .id = -1, @@ -249,17 +249,8 @@ int __init s3c2410_baseclk_add(void) /* install (and disable) the clocks we do not need immediately */ - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2410_clkcon_enable(clkp, 0); - } + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); /* show the clock-slow value */ diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c new file mode 100644 index 000000000000..461f070eb62d --- /dev/null +++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c @@ -0,0 +1,472 @@ +/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c + * + * Copyright (c) 2007, 2010 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2443 Clock control suport - common code + */ + +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <mach/regs-s3c2443-clock.h> + +#include <plat/s3c2443.h> +#include <plat/clock.h> +#include <plat/clock-clksrc.h> +#include <plat/cpu.h> + +#include <plat/cpu-freq.h> + + +static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) +{ + u32 ctrlbit = clk->ctrlbit; + u32 con = __raw_readl(reg); + + if (enable) + con |= ctrlbit; + else + con &= ~ctrlbit; + + __raw_writel(con, reg); + return 0; +} + +int s3c2443_clkcon_enable_h(struct clk *clk, int enable) +{ + return s3c2443_gate(S3C2443_HCLKCON, clk, enable); +} + +int s3c2443_clkcon_enable_p(struct clk *clk, int enable) +{ + return s3c2443_gate(S3C2443_PCLKCON, clk, enable); +} + +int s3c2443_clkcon_enable_s(struct clk *clk, int enable) +{ + return s3c2443_gate(S3C2443_SCLKCON, clk, enable); +} + +/* mpllref is a direct descendant of clk_xtal by default, but it is not + * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as + * such directly equating the two source clocks is impossible. + */ +struct clk clk_mpllref = { + .name = "mpllref", + .parent = &clk_xtal, + .id = -1, +}; + +static struct clk *clk_epllref_sources[] = { + [0] = &clk_mpllref, + [1] = &clk_mpllref, + [2] = &clk_xtal, + [3] = &clk_ext, +}; + +struct clksrc_clk clk_epllref = { + .clk = { + .name = "epllref", + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_epllref_sources, + .nr_sources = ARRAY_SIZE(clk_epllref_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, +}; + +/* esysclk + * + * this is sourced from either the EPLL or the EPLLref clock +*/ + +static struct clk *clk_sysclk_sources[] = { + [0] = &clk_epllref.clk, + [1] = &clk_epll, +}; + +struct clksrc_clk clk_esysclk = { + .clk = { + .name = "esysclk", + .parent = &clk_epll, + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_sysclk_sources, + .nr_sources = ARRAY_SIZE(clk_sysclk_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, +}; + +static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV0); + + div &= S3C2443_CLKDIV0_EXTDIV_MASK; + div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ + + return parent_rate / (div + 1); +} + +static struct clk clk_mdivclk = { + .name = "mdivclk", + .parent = &clk_mpllref, + .id = -1, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_mdivclk, + }, +}; + +static struct clk *clk_msysclk_sources[] = { + [0] = &clk_mpllref, + [1] = &clk_mpll, + [2] = &clk_mdivclk, + [3] = &clk_mpllref, +}; + +struct clksrc_clk clk_msysclk = { + .clk = { + .name = "msysclk", + .parent = &clk_xtal, + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_msysclk_sources, + .nr_sources = ARRAY_SIZE(clk_msysclk_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, +}; + +/* prediv + * + * this divides the msysclk down to pass to h/p/etc. + */ + +static unsigned long s3c2443_prediv_getrate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + + clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; + clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; + + return rate / (clkdiv0 + 1); +} + +static struct clk clk_prediv = { + .name = "prediv", + .id = -1, + .parent = &clk_msysclk.clk, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_prediv_getrate, + }, +}; + +/* usbhost + * + * usb host bus-clock, usually 48MHz to provide USB bus clock timing +*/ + +static struct clksrc_clk clk_usb_bus_host = { + .clk = { + .name = "usb-bus-host-parent", + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_USBHOST, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, +}; + +/* common clksrc clocks */ + +static struct clksrc_clk clksrc_clks[] = { + { + /* ART baud-rate clock sourced from esysclk via a divisor */ + .clk = { + .name = "uartclk", + .id = -1, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, + }, { + /* camera interface bus-clock, divided down from esysclk */ + .clk = { + .name = "camif-upll", /* same as 2440 name */ + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_CAMCLK, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, + }, { + .clk = { + .name = "display-if", + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_DISPCLK, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, + }, +}; + + +static struct clk init_clocks_off[] = { + { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_ADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_IIC, + } +}; + +static struct clk init_clocks[] = { + { + .name = "dma", + .id = 0, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA0, + }, { + .name = "dma", + .id = 1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA1, + }, { + .name = "dma", + .id = 2, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA2, + }, { + .name = "dma", + .id = 3, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA3, + }, { + .name = "dma", + .id = 4, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA4, + }, { + .name = "dma", + .id = 5, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA5, + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_HSMMC, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_GPIO, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_USBH, + }, { + .name = "usb-device", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_USBD, + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_LCDC, + + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_PWMT, + }, { + .name = "cfc", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_CFC, + }, { + .name = "ssmc", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_SSMC, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART3, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C2443_PCLKCON_WDT, + }, { + .name = "ac97", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C2443_PCLKCON_AC97, + }, { + .name = "nand", + .id = -1, + .parent = &clk_h, + }, { + .name = "usb-bus-host", + .id = -1, + .parent = &clk_usb_bus_host.clk, + } +}; + +static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) +{ + clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; + + return clkcon0 + 1; +} + +/* EPLLCON compatible enough to get on/off information */ + +void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll, + fdiv_fn get_fdiv) +{ + unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); + unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + struct clk *xtal_clk; + unsigned long xtal; + unsigned long pll; + unsigned long fclk; + unsigned long hclk; + unsigned long pclk; + int ptr; + + xtal_clk = clk_get(NULL, "xtal"); + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + pll = get_mpll(mpllcon, xtal); + clk_msysclk.clk.rate = pll; + + fclk = pll / get_fdiv(clkdiv0); + hclk = s3c2443_prediv_getrate(&clk_prediv); + hclk /= s3c2443_get_hdiv(clkdiv0); + pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); + + s3c24xx_setup_clocks(fclk, hclk, pclk); + + printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", + (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", + print_mhz(pll), print_mhz(fclk), + print_mhz(hclk), print_mhz(pclk)); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) + s3c_set_clksrc(&clksrc_clks[ptr], true); + + /* ensure usb bus clock is within correct rate of 48MHz */ + + if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { + printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); + clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); + } + + printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", + (epllcon & S3C2443_PLLCON_OFF) ? "off":"on", + print_mhz(clk_get_rate(&clk_epll)), + print_mhz(clk_get_rate(&clk_usb_bus))); +} + +static struct clk *clks[] __initdata = { + &clk_prediv, + &clk_mpllref, + &clk_mdivclk, + &clk_ext, + &clk_epll, + &clk_usb_bus, +}; + +static struct clksrc_clk *clksrcs[] __initdata = { + &clk_usb_bus_host, + &clk_epllref, + &clk_esysclk, + &clk_msysclk, +}; + +void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, + fdiv_fn get_fdiv) +{ + int ptr; + + /* s3c2443 parents h and p clocks from prediv */ + clk_h.parent = &clk_prediv; + clk_p.parent = &clk_prediv; + + clk_usb_bus.parent = &clk_usb_bus_host.clk; + clk_epll.parent = &clk_epllref.clk; + + s3c24xx_register_baseclocks(xtal); + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_register_clksrc(clksrcs[ptr], 1); + + s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + /* See s3c2443/etc notes on disabling clocks at init time */ + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + s3c2443_common_setup_clocks(get_mpll, get_fdiv); +} diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c index 71a6accf114e..9e90a7cbd1d6 100644 --- a/arch/arm/plat-s3c24xx/setup-i2c.c +++ b/arch/arm/plat-s3c24xx/setup-i2c.c @@ -15,12 +15,13 @@ struct platform_device; +#include <plat/gpio-cfg.h> #include <plat/iic.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA); - s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL); + s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA); + s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL); } diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index da7a61728c18..9793544a6ace 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -21,16 +21,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, int enable) { if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); - s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); - s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); + s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); + s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); + s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); s3c2410_gpio_pullup(S3C2410_GPE(11), 0); s3c2410_gpio_pullup(S3C2410_GPE(13), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPE(11), 1); - s3c2410_gpio_pullup(S3C2410_GPE(12), 1); - s3c2410_gpio_pullup(S3C2410_GPE(13), 1); + s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c index 89fcf5308cf6..db9e9e477ec1 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c @@ -23,16 +23,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, printk(KERN_INFO "%s(%d)\n", __func__, enable); if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); - s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); - s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); + s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); + s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); + s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); s3c2410_gpio_pullup(S3C2410_GPD(10), 0); s3c2410_gpio_pullup(S3C2410_GPD(9), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPD(10), 1); - s3c2410_gpio_pullup(S3C2410_GPD(9), 1); - s3c2410_gpio_pullup(S3C2410_GPD(8), 1); + s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index 86b9edc67413..8ea663a438bb 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -21,16 +21,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, int enable) { if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); - s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); - s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); + s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); + s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); + s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); s3c2410_gpio_pullup(S3C2410_GPG(5), 0); s3c2410_gpio_pullup(S3C2410_GPG(6), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPG(5), 1); - s3c2410_gpio_pullup(S3C2410_GPG(6), 1); - s3c2410_gpio_pullup(S3C2410_GPG(7), 1); + s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 1b25c9d8c403..8bf79f3efdfb 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -376,6 +376,21 @@ void __init s3c_register_clocks(struct clk *clkp, int nr_clks) } } +/** + * s3c_disable_clocks() - disable an array of clocks + * @clkp: Pointer to the first clock in the array. + * @nr_clks: Number of clocks to register. + * + * for internal use only at initialisation time. disable the clocks in the + * @clkp array. + */ + +void __init s3c_disable_clocks(struct clk *clkp, int nr_clks) +{ + for (; nr_clks > 0; nr_clks--, clkp++) + (clkp->enable)(clkp, 0); +} + /* initalise all the clocks */ int __init s3c24xx_register_baseclocks(unsigned long xtal) diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 44a84e896546..3282db360fa8 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s3c/gpio-config.c * * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics + * Copyright 2008-2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * @@ -41,6 +41,26 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) } EXPORT_SYMBOL(s3c_gpio_cfgpin); +unsigned s3c_gpio_getcfg(unsigned int pin) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + unsigned ret = 0; + int offset; + + if (chip) { + offset = pin - chip->chip.base; + + local_irq_save(flags); + ret = s3c_gpio_do_getcfg(chip, offset); + local_irq_restore(flags); + } + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_getcfg); + + int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) { struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); @@ -61,8 +81,8 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) EXPORT_SYMBOL(s3c_gpio_setpull); #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX -int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) +int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) { void __iomem *reg = chip->base; unsigned int shift = off; @@ -87,6 +107,19 @@ int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, return 0; } +unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off; + con &= 1; + con++; + + return S3C_GPIO_SFN(con); +} + int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg) { @@ -109,6 +142,19 @@ int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, return 0; } + +unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off * 2; + con &= 3; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} #endif #ifdef CONFIG_S3C_GPIO_CFG_S3C64XX @@ -134,6 +180,25 @@ int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, return 0; } + +unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + con = __raw_readl(reg); + con >>= shift; + con &= 0xf; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + #endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ #ifdef CONFIG_S3C_GPIO_PULL_UPDOWN @@ -164,3 +229,35 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, return (__force s3c_gpio_pull_t)pup; } #endif + +#ifdef CONFIG_S3C_GPIO_PULL_UP +int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup = __raw_readl(reg); + + if (pup == S3C_GPIO_PULL_UP) + pup &= ~(1 << off); + else if (pup == S3C_GPIO_PULL_NONE) + pup |= (1 << off); + else + return -EINVAL; + + __raw_writel(pup, reg); + return 0; +} + +s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup &= (1 << off); + return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP; +} +#endif /* CONFIG_S3C_GPIO_PULL_UP */ + diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 60b62692ac7a..12caf48a6bdc 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -91,6 +91,7 @@ extern int s3c24xx_register_clock(struct clk *clk); extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); extern void s3c_register_clocks(struct clk *clk, int nr_clks); +extern void s3c_disable_clocks(struct clk *clkp, int nr_clks); extern int s3c24xx_register_baseclocks(unsigned long xtal); diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index d316b4a579f4..5dbeb7991e60 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -73,6 +73,7 @@ extern struct sys_timer s3c24xx_timer; extern struct sysdev_class s3c2410_sysclass; extern struct sysdev_class s3c2410a_sysclass; extern struct sysdev_class s3c2412_sysclass; +extern struct sysdev_class s3c2416_sysclass; extern struct sysdev_class s3c2440_sysclass; extern struct sysdev_class s3c2442_sysclass; extern struct sysdev_class s3c2443_sysclass; diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index dda19da037ad..3e21c75feefa 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -30,6 +30,12 @@ static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, return (chip->config->set_config)(chip, off, config); } +static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip, + unsigned int off) +{ + return (chip->config->get_config)(chip, off); +} + static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, unsigned int off, s3c_gpio_pull_t pull) { @@ -53,6 +59,18 @@ extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); /** + * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg + * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the + * S3C_GPIO_SPECIAL() macro. + */ +unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off); + +/** * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. @@ -65,6 +83,21 @@ extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable + * GPIO configuration value. + * + * @sa s3c_gpio_getcfg_s3c24xx + * @sa s3c_gpio_getcfg_s3c64xx_4bit + */ +extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off); + /** * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. * @chip: The gpio chip that is being configured. @@ -85,6 +118,20 @@ extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); +/** + * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration + * register setting into a value the software can use, such as could be passed + * to s3c_gpio_setcfg_s3c64xx_4bit(). + * + * @sa s3c_gpio_getcfg_s3c24xx + */ +extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off); + /* Pull-{up,down} resistor controls. * * S3C2410,S3C2440,S3C24A0 = Pull-UP, @@ -146,6 +193,17 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, unsigned int off); /** + * s3c_gpio_getpull_1up() - Get configuration for choice of up or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-up resistor for the + * given GPIO in the same case as s3c_gpio_setpull_1up. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off); + +/** * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 29cd6a86cade..8d01e853df39 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -77,6 +77,17 @@ struct s3c_gpio_cfg { */ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); +/** + * s3c_gpio_getcfg - Read the current function for a GPIO pin + * @pin: The pin to read the configuration value for. + * + * Read the configuration state of the given @pin, returning a value that + * could be passed back to s3c_gpio_cfgpin(). + * + * @sa s3c_gpio_cfgpin + */ +extern unsigned s3c_gpio_getcfg(unsigned int pin); + /* Define values for the pull-{up,down} available for each gpio pin. * * These values control the state of the weak pull-{up,down} resistors diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 49ff406a7066..f0584f26d493 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -108,6 +108,9 @@ extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); +/* exported for core SoC support to change */ +extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default; + #ifdef CONFIG_S3C_GPIO_TRACK extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h new file mode 100644 index 000000000000..b8b7e1d884f8 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/pll6553x.h @@ -0,0 +1,51 @@ +/* arch/arm/plat-samsung/include/plat/pll6553x.h + * partially from arch/arm/mach-s3c64xx/include/mach/pll.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Samsung PLL6553x PLL code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* S3C6400 and compatible (S3C2416, etc.) EPLL code */ + +#define PLL6553X_MDIV_MASK ((1 << (23-16)) - 1) +#define PLL6553X_PDIV_MASK ((1 << (13-8)) - 1) +#define PLL6553X_SDIV_MASK ((1 << (2-0)) - 1) +#define PLL6553X_MDIV_SHIFT (16) +#define PLL6553X_PDIV_SHIFT (8) +#define PLL6553X_SDIV_SHIFT (0) +#define PLL6553X_KDIV_MASK (0xffff) + +static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, + u32 pll0, u32 pll1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; + pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; + sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; + kdiv = pll1 & PLL6553X_KDIV_MASK; + + /* We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig new file mode 100644 index 000000000000..1bb3dbce8810 --- /dev/null +++ b/arch/arm/plat-spear/Kconfig @@ -0,0 +1,31 @@ +# +# SPEAr Platform configuration file +# + +if PLAT_SPEAR + +choice + prompt "ST SPEAr Family" + default ARCH_SPEAR3XX + +config ARCH_SPEAR3XX + bool "SPEAr3XX" + select ARM_VIC + select CPU_ARM926T + help + Supports for ARM's SPEAR3XX family + +config ARCH_SPEAR6XX + bool "SPEAr6XX" + select ARM_VIC + select CPU_ARM926T + help + Supports for ARM's SPEAR6XX family + +endchoice + +# Adding SPEAr machine specific configuration files +source "arch/arm/mach-spear3xx/Kconfig" +source "arch/arm/mach-spear6xx/Kconfig" + +endif diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile new file mode 100644 index 000000000000..eb89540aeda9 --- /dev/null +++ b/arch/arm/plat-spear/Makefile @@ -0,0 +1,8 @@ +# +# SPEAr Platform specific Makefile +# + +# Common support +obj-y := clock.o padmux.o time.o + +obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c new file mode 100644 index 000000000000..ee4f90e534d8 --- /dev/null +++ b/arch/arm/plat-spear/clock.c @@ -0,0 +1,435 @@ +/* + * arch/arm/plat-spear/clock.c + * + * Clock framework for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/bug.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <mach/misc_regs.h> +#include <plat/clock.h> + +static DEFINE_SPINLOCK(clocks_lock); +static LIST_HEAD(root_clks); + +static void propagate_rate(struct list_head *); + +static int generic_clk_enable(struct clk *clk) +{ + unsigned int val; + + if (!clk->en_reg) + return -EFAULT; + + val = readl(clk->en_reg); + if (unlikely(clk->flags & RESET_TO_ENABLE)) + val &= ~(1 << clk->en_reg_bit); + else + val |= 1 << clk->en_reg_bit; + + writel(val, clk->en_reg); + + return 0; +} + +static void generic_clk_disable(struct clk *clk) +{ + unsigned int val; + + if (!clk->en_reg) + return; + + val = readl(clk->en_reg); + if (unlikely(clk->flags & RESET_TO_ENABLE)) + val |= 1 << clk->en_reg_bit; + else + val &= ~(1 << clk->en_reg_bit); + + writel(val, clk->en_reg); +} + +/* generic clk ops */ +static struct clkops generic_clkops = { + .enable = generic_clk_enable, + .disable = generic_clk_disable, +}; + +/* + * clk_enable - inform the system when the clock source should be running. + * @clk: clock source + * + * If the clock can not be enabled/disabled, this should return success. + * + * Returns success (0) or negative errno. + */ +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret = 0; + + if (!clk || IS_ERR(clk)) + return -EFAULT; + + spin_lock_irqsave(&clocks_lock, flags); + if (clk->usage_count == 0) { + if (clk->ops && clk->ops->enable) + ret = clk->ops->enable(clk); + } + clk->usage_count++; + spin_unlock_irqrestore(&clocks_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +/* + * clk_disable - inform the system when the clock source is no longer required. + * @clk: clock source + * + * Inform the system that a clock source is no longer required by + * a driver and may be shut down. + * + * Implementation detail: if the clock source is shared between + * multiple drivers, clk_enable() calls must be balanced by the + * same number of clk_disable() calls for the clock source to be + * disabled. + */ +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (!clk || IS_ERR(clk)) + return; + + WARN_ON(clk->usage_count == 0); + + spin_lock_irqsave(&clocks_lock, flags); + clk->usage_count--; + if (clk->usage_count == 0) { + if (clk->ops && clk->ops->disable) + clk->ops->disable(clk); + } + spin_unlock_irqrestore(&clocks_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +/** + * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. + * This is only valid once the clock source has been enabled. + * @clk: clock source + */ +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags, rate; + + spin_lock_irqsave(&clocks_lock, flags); + rate = clk->rate; + spin_unlock_irqrestore(&clocks_lock, flags); + + return rate; +} +EXPORT_SYMBOL(clk_get_rate); + +/** + * clk_set_parent - set the parent clock source for this clock + * @clk: clock source + * @parent: parent clock source + * + * Returns success (0) or negative errno. + */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int i, found = 0, val = 0; + unsigned long flags; + + if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent)) + return -EFAULT; + if (clk->usage_count) + return -EBUSY; + if (!clk->pclk_sel) + return -EPERM; + if (clk->pclk == parent) + return 0; + + for (i = 0; i < clk->pclk_sel->pclk_count; i++) { + if (clk->pclk_sel->pclk_info[i].pclk == parent) { + found = 1; + break; + } + } + + if (!found) + return -EINVAL; + + spin_lock_irqsave(&clocks_lock, flags); + /* reflect parent change in hardware */ + val = readl(clk->pclk_sel->pclk_sel_reg); + val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift); + val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift; + writel(val, clk->pclk_sel->pclk_sel_reg); + spin_unlock_irqrestore(&clocks_lock, flags); + + /* reflect parent change in software */ + clk->recalc(clk); + propagate_rate(&clk->children); + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + +/* registers clock in platform clock framework */ +void clk_register(struct clk_lookup *cl) +{ + struct clk *clk = cl->clk; + unsigned long flags; + + if (!clk || IS_ERR(clk)) + return; + + spin_lock_irqsave(&clocks_lock, flags); + + INIT_LIST_HEAD(&clk->children); + if (clk->flags & ALWAYS_ENABLED) + clk->ops = NULL; + else if (!clk->ops) + clk->ops = &generic_clkops; + + /* root clock don't have any parents */ + if (!clk->pclk && !clk->pclk_sel) { + list_add(&clk->sibling, &root_clks); + /* add clocks with only one parent to parent's children list */ + } else if (clk->pclk && !clk->pclk_sel) { + list_add(&clk->sibling, &clk->pclk->children); + } else { + /* add clocks with > 1 parent to 1st parent's children list */ + list_add(&clk->sibling, + &clk->pclk_sel->pclk_info[0].pclk->children); + } + spin_unlock_irqrestore(&clocks_lock, flags); + + /* add clock to arm clockdev framework */ + clkdev_add(cl); +} + +/** + * propagate_rate - recalculate and propagate all clocks in list head + * + * Recalculates all root clocks in list head, which if the clock's .recalc is + * set correctly, should also propagate their rates. + */ +static void propagate_rate(struct list_head *lhead) +{ + struct clk *clkp, *_temp; + + list_for_each_entry_safe(clkp, _temp, lhead, sibling) { + if (clkp->recalc) + clkp->recalc(clkp); + propagate_rate(&clkp->children); + } +} + +/* returns current programmed clocks clock info structure */ +static struct pclk_info *pclk_info_get(struct clk *clk) +{ + unsigned int mask, i; + unsigned long flags; + struct pclk_info *info = NULL; + + spin_lock_irqsave(&clocks_lock, flags); + mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift) + & clk->pclk_sel->pclk_sel_mask; + + for (i = 0; i < clk->pclk_sel->pclk_count; i++) { + if (clk->pclk_sel->pclk_info[i].pclk_mask == mask) + info = &clk->pclk_sel->pclk_info[i]; + } + spin_unlock_irqrestore(&clocks_lock, flags); + + return info; +} + +/* + * Set pclk as cclk's parent and add clock sibling node to current parents + * children list + */ +static void change_parent(struct clk *cclk, struct clk *pclk) +{ + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + list_del(&cclk->sibling); + list_add(&cclk->sibling, &pclk->children); + + cclk->pclk = pclk; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/* + * calculates current programmed rate of pll1 + * + * In normal mode + * rate = (2 * M[15:8] * Fin)/(N * 2^P) + * + * In Dithered mode + * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P) + */ +void pll1_clk_recalc(struct clk *clk) +{ + struct pll_clk_config *config = clk->private_data; + unsigned int num = 2, den = 0, val, mode = 0; + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + mode = (readl(config->mode_reg) >> PLL_MODE_SHIFT) & + PLL_MODE_MASK; + + val = readl(config->cfg_reg); + /* calculate denominator */ + den = (val >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK; + den = 1 << den; + den *= (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK; + + /* calculate numerator & denominator */ + if (!mode) { + /* Normal mode */ + num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK; + } else { + /* Dithered mode */ + num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK; + den *= 256; + } + + clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/* calculates current programmed rate of ahb or apb bus */ +void bus_clk_recalc(struct clk *clk) +{ + struct bus_clk_config *config = clk->private_data; + unsigned int div; + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + div = ((readl(config->reg) >> config->shift) & config->mask) + 1; + clk->rate = (unsigned long)clk->pclk->rate / div; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/* + * calculates current programmed rate of auxiliary synthesizers + * used by: UART, FIRDA + * + * Fout from synthesizer can be given from two equations: + * Fout1 = (Fin * X/Y)/2 + * Fout2 = Fin * X/Y + * + * Selection of eqn 1 or 2 is programmed in register + */ +void aux_clk_recalc(struct clk *clk) +{ + struct aux_clk_config *config = clk->private_data; + struct pclk_info *pclk_info = NULL; + unsigned int num = 1, den = 1, val, eqn; + unsigned long flags; + + /* get current programmed parent */ + pclk_info = pclk_info_get(clk); + if (!pclk_info) { + spin_lock_irqsave(&clocks_lock, flags); + clk->pclk = NULL; + clk->rate = 0; + spin_unlock_irqrestore(&clocks_lock, flags); + return; + } + + change_parent(clk, pclk_info->pclk); + + spin_lock_irqsave(&clocks_lock, flags); + if (pclk_info->scalable) { + val = readl(config->synth_reg); + + eqn = (val >> AUX_EQ_SEL_SHIFT) & AUX_EQ_SEL_MASK; + if (eqn == AUX_EQ1_SEL) + den *= 2; + + /* calculate numerator */ + num = (val >> AUX_XSCALE_SHIFT) & AUX_XSCALE_MASK; + + /* calculate denominator */ + den *= (val >> AUX_YSCALE_SHIFT) & AUX_YSCALE_MASK; + val = (((clk->pclk->rate/10000) * num) / den) * 10000; + } else + val = clk->pclk->rate; + + clk->rate = val; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/* + * calculates current programmed rate of gpt synthesizers + * Fout from synthesizer can be given from below equations: + * Fout= Fin/((2 ^ (N+1)) * (M+1)) + */ +void gpt_clk_recalc(struct clk *clk) +{ + struct aux_clk_config *config = clk->private_data; + struct pclk_info *pclk_info = NULL; + unsigned int div = 1, val; + unsigned long flags; + + pclk_info = pclk_info_get(clk); + if (!pclk_info) { + spin_lock_irqsave(&clocks_lock, flags); + clk->pclk = NULL; + clk->rate = 0; + spin_unlock_irqrestore(&clocks_lock, flags); + return; + } + + change_parent(clk, pclk_info->pclk); + + spin_lock_irqsave(&clocks_lock, flags); + if (pclk_info->scalable) { + val = readl(config->synth_reg); + div += (val >> GPT_MSCALE_SHIFT) & GPT_MSCALE_MASK; + div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1); + } + + clk->rate = (unsigned long)clk->pclk->rate / div; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/* + * Used for clocks that always have same value as the parent clock divided by a + * fixed divisor + */ +void follow_parent(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + clk->rate = clk->pclk->rate; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +/** + * recalc_root_clocks - recalculate and propagate all root clocks + * + * Recalculates all root clocks (clocks with no parent), which if the + * clock's .recalc is set correctly, should also propagate their rates. + */ +void recalc_root_clocks(void) +{ + propagate_rate(&root_clks); +} diff --git a/arch/arm/plat-spear/include/plat/clkdev.h b/arch/arm/plat-spear/include/plat/clkdev.h new file mode 100644 index 000000000000..a2d0112fcaf7 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/clkdev.h @@ -0,0 +1,20 @@ +/* + * arch/arm/plat-spear/include/plat/clkdev.h + * + * Clock Dev framework definitions for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_CLKDEV_H +#define __PLAT_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif /* __PLAT_CLKDEV_H */ diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h new file mode 100644 index 000000000000..298bafc0a52f --- /dev/null +++ b/arch/arm/plat-spear/include/plat/clock.h @@ -0,0 +1,126 @@ +/* + * arch/arm/plat-spear/include/plat/clock.h + * + * Clock framework definitions for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_CLOCK_H +#define __PLAT_CLOCK_H + +#include <linux/list.h> +#include <asm/clkdev.h> +#include <linux/types.h> + +/* clk structure flags */ +#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */ +#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */ + +/** + * struct clkops - clock operations + * @enable: pointer to clock enable function + * @disable: pointer to clock disable function + */ +struct clkops { + int (*enable) (struct clk *); + void (*disable) (struct clk *); +}; + +/** + * struct pclk_info - parents info + * @pclk: pointer to parent clk + * @pclk_mask: value to be written for selecting this parent + * @scalable: Is parent scalable (1 - YES, 0 - NO) + */ +struct pclk_info { + struct clk *pclk; + u8 pclk_mask; + u8 scalable; +}; + +/** + * struct pclk_sel - parents selection configuration + * @pclk_info: pointer to array of parent clock info + * @pclk_count: number of parents + * @pclk_sel_reg: register for selecting a parent + * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also) + */ +struct pclk_sel { + struct pclk_info *pclk_info; + u8 pclk_count; + unsigned int *pclk_sel_reg; + unsigned int pclk_sel_mask; +}; + +/** + * struct clk - clock structure + * @usage_count: num of users who enabled this clock + * @flags: flags for clock properties + * @rate: programmed clock rate in Hz + * @en_reg: clk enable/disable reg + * @en_reg_bit: clk enable/disable bit + * @ops: clk enable/disable ops - generic_clkops selected if NULL + * @recalc: pointer to clock rate recalculate function + * @pclk: current parent clk + * @pclk_sel: pointer to parent selection structure + * @pclk_sel_shift: register shift for selecting parent of this clock + * @children: list for childrens or this clock + * @sibling: node for list of clocks having same parents + * @private_data: clock specific private data + */ +struct clk { + unsigned int usage_count; + unsigned int flags; + unsigned long rate; + unsigned int *en_reg; + u8 en_reg_bit; + const struct clkops *ops; + void (*recalc) (struct clk *); + + struct clk *pclk; + struct pclk_sel *pclk_sel; + unsigned int pclk_sel_shift; + + struct list_head children; + struct list_head sibling; + void *private_data; +}; + +/* pll configuration structure */ +struct pll_clk_config { + unsigned int *mode_reg; + unsigned int *cfg_reg; +}; + +/* ahb and apb bus configuration structure */ +struct bus_clk_config { + unsigned int *reg; + unsigned int mask; + unsigned int shift; +}; + +/* + * Aux clk configuration structure: applicable to GPT, UART and FIRDA + */ +struct aux_clk_config { + unsigned int *synth_reg; +}; + +/* platform specific clock functions */ +void clk_register(struct clk_lookup *cl); +void recalc_root_clocks(void); + +/* clock recalc functions */ +void follow_parent(struct clk *clk); +void pll1_clk_recalc(struct clk *clk); +void bus_clk_recalc(struct clk *clk); +void gpt_clk_recalc(struct clk *clk); +void aux_clk_recalc(struct clk *clk); + +#endif /* __PLAT_CLOCK_H */ diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S new file mode 100644 index 000000000000..1670734b7e51 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -0,0 +1,38 @@ +/* + * arch/arm/plat-spear/include/plat/debug-macro.S + * + * Debugging macro include header for spear platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/amba/serial.h> +#include <mach/spear.h> + + .macro addruart, rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, =SPEAR_DBG_UART_BASE @ Physical base + movne \rx, =VA_SPEAR_DBG_UART_BASE @ Virtual base + .endm + + .macro senduart, rd, rx + strb \rd, [\rx, #UART01x_DR] @ ASC_TX_BUFFER + .endm + + .macro waituart, rd, rx +1001: ldr \rd, [\rx, #UART01x_FR] @ FLAG REGISTER + tst \rd, #UART01x_FR_TXFF @ TX_FULL + bne 1001b + .endm + + .macro busyuart, rd, rx +1002: ldr \rd, [\rx, #UART01x_FR] @ FLAG REGISTER + tst \rd, #UART011_FR_TXFE @ TX_EMPTY + beq 1002b + .endm diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h new file mode 100644 index 000000000000..b857c91257dd --- /dev/null +++ b/arch/arm/plat-spear/include/plat/gpio.h @@ -0,0 +1,24 @@ +/* + * arch/arm/plat-spear/include/plat/gpio.h + * + * GPIO macros for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_GPIO_H +#define __PLAT_GPIO_H + +#include <asm-generic/gpio.h> + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +#endif /* __PLAT_GPIO_H */ diff --git a/arch/arm/plat-spear/include/plat/io.h b/arch/arm/plat-spear/include/plat/io.h new file mode 100644 index 000000000000..4d4ba822b3eb --- /dev/null +++ b/arch/arm/plat-spear/include/plat/io.h @@ -0,0 +1,22 @@ +/* + * arch/arm/plat-spear/include/plat/io.h + * + * IO definitions for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_IO_H +#define __PLAT_IO_H + +#define IO_SPACE_LIMIT 0xFFFFFFFF + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif /* __PLAT_IO_H */ diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h new file mode 100644 index 000000000000..27a4aba77343 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/memory.h @@ -0,0 +1,20 @@ +/* + * arch/arm/plat-spear/include/plat/memory.h + * + * Memory map for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_MEMORY_H +#define __PLAT_MEMORY_H + +/* Physical DRAM offset */ +#define PHYS_OFFSET UL(0x00000000) + +#endif /* __PLAT_MEMORY_H */ diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h new file mode 100644 index 000000000000..877f3adcf610 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/padmux.h @@ -0,0 +1,92 @@ +/* + * arch/arm/plat-spear/include/plat/padmux.h + * + * SPEAr platform specific gpio pads muxing file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_PADMUX_H +#define __PLAT_PADMUX_H + +#include <linux/types.h> + +/* + * struct pmx_reg: configuration structure for mode reg and mux reg + * + * offset: offset of mode reg + * mask: mask of mode reg + */ +struct pmx_reg { + u32 offset; + u32 mask; +}; + +/* + * struct pmx_dev_mode: configuration structure every group of modes of a device + * + * ids: all modes for this configuration + * mask: mask for supported mode + */ +struct pmx_dev_mode { + u32 ids; + u32 mask; +}; + +/* + * struct pmx_mode: mode definition structure + * + * name: mode name + * mask: mode mask + */ +struct pmx_mode { + char *name; + u32 id; + u32 mask; +}; + +/* + * struct pmx_dev: device definition structure + * + * name: device name + * modes: device configuration array for different modes supported + * mode_count: size of modes array + * is_active: is peripheral active/enabled + * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg + */ +struct pmx_dev { + char *name; + struct pmx_dev_mode *modes; + u8 mode_count; + bool is_active; + bool enb_on_reset; +}; + +/* + * struct pmx_driver: driver definition structure + * + * mode: mode to be set + * devs: array of pointer to pmx devices + * devs_count: ARRAY_SIZE of devs + * base: base address of soc config registers + * mode_reg: structure of mode config register + * mux_reg: structure of device mux config register + */ +struct pmx_driver { + struct pmx_mode *mode; + struct pmx_dev **devs; + u8 devs_count; + u32 *base; + struct pmx_reg mode_reg; + struct pmx_reg mux_reg; +}; + +/* pmx functions */ +int pmx_register(struct pmx_driver *driver); + +#endif /* __PLAT_PADMUX_H */ diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h new file mode 100644 index 000000000000..03ed8b585dcf --- /dev/null +++ b/arch/arm/plat-spear/include/plat/shirq.h @@ -0,0 +1,73 @@ +/* + * arch/arm/plat-spear/include/plat/shirq.h + * + * SPEAr platform shared irq layer header file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_SHIRQ_H +#define __PLAT_SHIRQ_H + +#include <linux/irq.h> +#include <linux/types.h> + +/* + * struct shirq_dev_config: shared irq device configuration + * + * virq: virtual irq number of device + * enb_mask: enable mask of device + * status_mask: status mask of device + * clear_mask: clear mask of device + */ +struct shirq_dev_config { + u32 virq; + u32 enb_mask; + u32 status_mask; + u32 clear_mask; +}; + +/* + * struct shirq_regs: shared irq register configuration + * + * base: base address of shared irq register + * enb_reg: enable register offset + * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt + * status_reg: status register offset + * status_reg_mask: status register valid mask + * clear_reg: clear register offset + * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt + */ +struct shirq_regs { + void __iomem *base; + u32 enb_reg; + u32 reset_to_enb; + u32 status_reg; + u32 status_reg_mask; + u32 clear_reg; + u32 reset_to_clear; +}; + +/* + * struct spear_shirq: shared irq structure + * + * irq: hardware irq number + * dev_config: array of device config structures which are using "irq" line + * dev_count: size of dev_config array + * regs: register configuration for shared irq block + */ +struct spear_shirq { + u32 irq; + struct shirq_dev_config *dev_config; + u32 dev_count; + struct shirq_regs regs; +}; + +int spear_shirq_register(struct spear_shirq *shirq); + +#endif /* __PLAT_SHIRQ_H */ diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h new file mode 100644 index 000000000000..55a4e405d578 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/system.h @@ -0,0 +1,41 @@ +/* + * arch/arm/plat-spear/include/plat/system.h + * + * SPEAr platform specific architecture functions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_SYSTEM_H +#define __PLAT_SYSTEM_H + +#include <asm/hardware/sp810.h> +#include <linux/io.h> +#include <mach/spear.h> + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + if (mode == 's') { + /* software reset, Jump into ROM at address 0 */ + cpu_reset(0); + } else { + /* hardware reset, Use on-chip reset capability */ + sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE); + } +} + +#endif /* __PLAT_SYSTEM_H */ diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h new file mode 100644 index 000000000000..914d09dd50fd --- /dev/null +++ b/arch/arm/plat-spear/include/plat/timex.h @@ -0,0 +1,19 @@ +/* + * arch/arm/plat-spear/include/plat/timex.h + * + * SPEAr platform specific timex definitions + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_TIMEX_H +#define __PLAT_TIMEX_H + +#define CLOCK_TICK_RATE 48000000 + +#endif /* __PLAT_TIMEX_H */ diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h new file mode 100644 index 000000000000..99ba6789cc97 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -0,0 +1,43 @@ +/* + * arch/arm/plat-spear/include/plat/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/io.h> +#include <linux/amba/serial.h> +#include <mach/spear.h> + +#ifndef __PLAT_UNCOMPRESS_H +#define __PLAT_UNCOMPRESS_H +/* + * This does not append a newline + */ +static inline void putc(int c) +{ + void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE; + + while (readl(base + UART01x_FR) & UART01x_FR_TXFF) + barrier(); + + writel(c, base + UART01x_DR); +} + +static inline void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() + +#endif /* __PLAT_UNCOMPRESS_H */ diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h new file mode 100644 index 000000000000..09e9372aea21 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/vmalloc.h @@ -0,0 +1,19 @@ +/* + * arch/arm/plat-spear/include/plat/vmalloc.h + * + * Defining Vmalloc area for SPEAr platform + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_VMALLOC_H +#define __PLAT_VMALLOC_H + +#define VMALLOC_END 0xF0000000 + +#endif /* __PLAT_VMALLOC_H */ diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c new file mode 100644 index 000000000000..d2aab3adcdeb --- /dev/null +++ b/arch/arm/plat-spear/padmux.c @@ -0,0 +1,164 @@ +/* + * arch/arm/plat-spear/include/plat/padmux.c + * + * SPEAr platform specific gpio pads muxing source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <plat/padmux.h> + +/* + * struct pmx: pmx definition structure + * + * base: base address of configuration registers + * mode_reg: mode configurations + * mux_reg: muxing configurations + * active_mode: pointer to current active mode + */ +struct pmx { + u32 base; + struct pmx_reg mode_reg; + struct pmx_reg mux_reg; + struct pmx_mode *active_mode; +}; + +static struct pmx *pmx; + +/** + * pmx_mode_set - Enables an multiplexing mode + * @mode - pointer to pmx mode + * + * It will set mode of operation in hardware. + * Returns -ve on Err otherwise 0 + */ +static int pmx_mode_set(struct pmx_mode *mode) +{ + u32 val; + + if (!mode->name) + return -EFAULT; + + pmx->active_mode = mode; + + val = readl(pmx->base + pmx->mode_reg.offset); + val &= ~pmx->mode_reg.mask; + val |= mode->mask & pmx->mode_reg.mask; + writel(val, pmx->base + pmx->mode_reg.offset); + + return 0; +} + +/** + * pmx_devs_enable - Enables list of devices + * @devs - pointer to pmx device array + * @count - number of devices to enable + * + * It will enable pads for all required peripherals once and only once. + * If peripheral is not supported by current mode then request is rejected. + * Conflicts between peripherals are not handled and peripherals will be + * enabled in the order they are present in pmx_dev array. + * In case of conflicts last peripheral enalbed will be present. + * Returns -ve on Err otherwise 0 + */ +static int pmx_devs_enable(struct pmx_dev **devs, u8 count) +{ + u32 val, i, mask; + + if (!count) + return -EINVAL; + + val = readl(pmx->base + pmx->mux_reg.offset); + for (i = 0; i < count; i++) { + u8 j = 0; + + if (!devs[i]->name || !devs[i]->modes) { + printk(KERN_ERR "padmux: dev name or modes is null\n"); + continue; + } + /* check if peripheral exists in active mode */ + if (pmx->active_mode) { + bool found = false; + for (j = 0; j < devs[i]->mode_count; j++) { + if (devs[i]->modes[j].ids & + pmx->active_mode->id) { + found = true; + break; + } + } + if (found == false) { + printk(KERN_ERR "%s device not available in %s"\ + "mode\n", devs[i]->name, + pmx->active_mode->name); + continue; + } + } + + /* enable peripheral */ + mask = devs[i]->modes[j].mask & pmx->mux_reg.mask; + if (devs[i]->enb_on_reset) + val &= ~mask; + else + val |= mask; + + devs[i]->is_active = true; + } + writel(val, pmx->base + pmx->mux_reg.offset); + kfree(pmx); + + /* this will ensure that multiplexing can't be changed now */ + pmx = (struct pmx *)-1; + + return 0; +} + +/** + * pmx_register - registers a platform requesting pad mux feature + * @driver - pointer to driver structure containing driver specific parameters + * + * Also this must be called only once. This will allocate memory for pmx + * structure, will call pmx_mode_set, will call pmx_devs_enable. + * Returns -ve on Err otherwise 0 + */ +int pmx_register(struct pmx_driver *driver) +{ + int ret = 0; + + if (pmx) + return -EPERM; + if (!driver->base || !driver->devs) + return -EFAULT; + + pmx = kzalloc(sizeof(*pmx), GFP_KERNEL); + if (!pmx) + return -ENOMEM; + + pmx->base = (u32)driver->base; + pmx->mode_reg.offset = driver->mode_reg.offset; + pmx->mode_reg.mask = driver->mode_reg.mask; + pmx->mux_reg.offset = driver->mux_reg.offset; + pmx->mux_reg.mask = driver->mux_reg.mask; + + /* choose mode to enable */ + if (driver->mode) { + ret = pmx_mode_set(driver->mode); + if (ret) + goto pmx_fail; + } + ret = pmx_devs_enable(driver->devs, driver->devs_count); + if (ret) + goto pmx_fail; + + return 0; + +pmx_fail: + return ret; +} diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c new file mode 100644 index 000000000000..2172d6946aea --- /dev/null +++ b/arch/arm/plat-spear/shirq.c @@ -0,0 +1,118 @@ +/* + * arch/arm/plat-spear/shirq.c + * + * SPEAr platform shared irq layer source file + * + * Copyright (C) 2009 ST Microelectronics + * Viresh Kumar<viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/spinlock.h> +#include <plat/shirq.h> + +struct spear_shirq *shirq; +static DEFINE_SPINLOCK(lock); + +static void shirq_irq_mask(unsigned irq) +{ + struct spear_shirq *shirq = get_irq_chip_data(irq); + u32 val, id = irq - shirq->dev_config[0].virq; + unsigned long flags; + + if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1) + return; + + spin_lock_irqsave(&lock, flags); + val = readl(shirq->regs.base + shirq->regs.enb_reg); + if (shirq->regs.reset_to_enb) + val |= shirq->dev_config[id].enb_mask; + else + val &= ~(shirq->dev_config[id].enb_mask); + writel(val, shirq->regs.base + shirq->regs.enb_reg); + spin_unlock_irqrestore(&lock, flags); +} + +static void shirq_irq_unmask(unsigned irq) +{ + struct spear_shirq *shirq = get_irq_chip_data(irq); + u32 val, id = irq - shirq->dev_config[0].virq; + unsigned long flags; + + if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1) + return; + + spin_lock_irqsave(&lock, flags); + val = readl(shirq->regs.base + shirq->regs.enb_reg); + if (shirq->regs.reset_to_enb) + val &= ~(shirq->dev_config[id].enb_mask); + else + val |= shirq->dev_config[id].enb_mask; + writel(val, shirq->regs.base + shirq->regs.enb_reg); + spin_unlock_irqrestore(&lock, flags); +} + +static struct irq_chip shirq_chip = { + .name = "spear_shirq", + .ack = shirq_irq_mask, + .mask = shirq_irq_mask, + .unmask = shirq_irq_unmask, +}; + +static void shirq_handler(unsigned irq, struct irq_desc *desc) +{ + u32 i, val, mask; + struct spear_shirq *shirq = get_irq_data(irq); + + desc->chip->ack(irq); + while ((val = readl(shirq->regs.base + shirq->regs.status_reg) & + shirq->regs.status_reg_mask)) { + for (i = 0; (i < shirq->dev_count) && val; i++) { + if (!(shirq->dev_config[i].status_mask & val)) + continue; + + generic_handle_irq(shirq->dev_config[i].virq); + + /* clear interrupt */ + val &= ~shirq->dev_config[i].status_mask; + if ((shirq->regs.clear_reg == -1) || + shirq->dev_config[i].clear_mask == -1) + continue; + mask = readl(shirq->regs.base + shirq->regs.clear_reg); + if (shirq->regs.reset_to_clear) + mask &= ~shirq->dev_config[i].clear_mask; + else + mask |= shirq->dev_config[i].clear_mask; + writel(mask, shirq->regs.base + shirq->regs.clear_reg); + } + } + desc->chip->unmask(irq); +} + +int spear_shirq_register(struct spear_shirq *shirq) +{ + int i; + + if (!shirq || !shirq->dev_config || !shirq->regs.base) + return -EFAULT; + + if (!shirq->dev_count) + return -EINVAL; + + set_irq_chained_handler(shirq->irq, shirq_handler); + for (i = 0; i < shirq->dev_count; i++) { + set_irq_chip(shirq->dev_config[i].virq, &shirq_chip); + set_irq_handler(shirq->dev_config[i].virq, handle_simple_irq); + set_irq_flags(shirq->dev_config[i].virq, IRQF_VALID); + set_irq_chip_data(shirq->dev_config[i].virq, shirq); + } + + set_irq_data(shirq->irq, shirq); + return 0; +} diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c new file mode 100644 index 000000000000..a1025d38f383 --- /dev/null +++ b/arch/arm/plat-spear/time.c @@ -0,0 +1,292 @@ +/* + * arch/arm/plat-spear/time.c + * + * Copyright (C) 2009 ST Microelectronics + * Shiraz Hashim<shiraz.hashim@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/irq.h> +#include <asm/mach/time.h> +#include <mach/irqs.h> +#include <mach/hardware.h> +#include <mach/spear.h> +#include <mach/generic.h> + +/* + * We would use TIMER0 and TIMER1 as clockevent and clocksource. + * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further + * they share same functional clock. Any change in one's functional clock will + * also affect other timer. + */ + +#define CLKEVT 0 /* gpt0, channel0 as clockevent */ +#define CLKSRC 1 /* gpt0, channel1 as clocksource */ + +/* Register offsets, x is channel number */ +#define CR(x) ((x) * 0x80 + 0x80) +#define IR(x) ((x) * 0x80 + 0x84) +#define LOAD(x) ((x) * 0x80 + 0x88) +#define COUNT(x) ((x) * 0x80 + 0x8C) + +/* Reg bit definitions */ +#define CTRL_INT_ENABLE 0x0100 +#define CTRL_ENABLE 0x0020 +#define CTRL_ONE_SHOT 0x0010 + +#define CTRL_PRESCALER1 0x0 +#define CTRL_PRESCALER2 0x1 +#define CTRL_PRESCALER4 0x2 +#define CTRL_PRESCALER8 0x3 +#define CTRL_PRESCALER16 0x4 +#define CTRL_PRESCALER32 0x5 +#define CTRL_PRESCALER64 0x6 +#define CTRL_PRESCALER128 0x7 +#define CTRL_PRESCALER256 0x8 + +#define INT_STATUS 0x1 + +static __iomem void *gpt_base; +static struct clk *gpt_clk; + +static void clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk_event_dev); +static int clockevent_next_event(unsigned long evt, + struct clock_event_device *clk_event_dev); + +/* + * Following clocksource_set_clock and clockevent_set_clock picked + * from arch/mips/kernel/time.c + */ + +void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock) +{ + u64 temp; + u32 shift; + + /* Find a shift value */ + for (shift = 32; shift > 0; shift--) { + temp = (u64) NSEC_PER_SEC << shift; + do_div(temp, clock); + if ((temp >> 32) == 0) + break; + } + cs->shift = shift; + cs->mult = (u32) temp; +} + +void __init clockevent_set_clock(struct clock_event_device *cd, + unsigned int clock) +{ + u64 temp; + u32 shift; + + /* Find a shift value */ + for (shift = 32; shift > 0; shift--) { + temp = (u64) clock << shift; + do_div(temp, NSEC_PER_SEC); + if ((temp >> 32) == 0) + break; + } + cd->shift = shift; + cd->mult = (u32) temp; +} + +static cycle_t clocksource_read_cycles(struct clocksource *cs) +{ + return (cycle_t) readw(gpt_base + COUNT(CLKSRC)); +} + +static struct clocksource clksrc = { + .name = "tmr1", + .rating = 200, /* its a pretty decent clock */ + .read = clocksource_read_cycles, + .mask = 0xFFFF, /* 16 bits */ + .mult = 0, /* to be computed */ + .shift = 0, /* to be computed */ + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void spear_clocksource_init(void) +{ + u32 tick_rate; + u16 val; + + /* program the prescaler (/256)*/ + writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC)); + + /* find out actual clock driving Timer */ + tick_rate = clk_get_rate(gpt_clk); + tick_rate >>= CTRL_PRESCALER256; + + writew(0xFFFF, gpt_base + LOAD(CLKSRC)); + + val = readw(gpt_base + CR(CLKSRC)); + val &= ~CTRL_ONE_SHOT; /* autoreload mode */ + val |= CTRL_ENABLE ; + writew(val, gpt_base + CR(CLKSRC)); + + clocksource_set_clock(&clksrc, tick_rate); + + /* register the clocksource */ + clocksource_register(&clksrc); +} + +static struct clock_event_device clkevt = { + .name = "tmr0", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = clockevent_set_mode, + .set_next_event = clockevent_next_event, + .shift = 0, /* to be computed */ +}; + +static void clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk_event_dev) +{ + u32 period; + u16 val; + + /* stop the timer */ + val = readw(gpt_base + CR(CLKEVT)); + val &= ~CTRL_ENABLE; + writew(val, gpt_base + CR(CLKEVT)); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + period = clk_get_rate(gpt_clk) / HZ; + period >>= CTRL_PRESCALER16; + writew(period, gpt_base + LOAD(CLKEVT)); + + val = readw(gpt_base + CR(CLKEVT)); + val &= ~CTRL_ONE_SHOT; + val |= CTRL_ENABLE | CTRL_INT_ENABLE; + writew(val, gpt_base + CR(CLKEVT)); + + break; + case CLOCK_EVT_MODE_ONESHOT: + val = readw(gpt_base + CR(CLKEVT)); + val |= CTRL_ONE_SHOT; + writew(val, gpt_base + CR(CLKEVT)); + + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + + break; + default: + pr_err("Invalid mode requested\n"); + break; + } +} + +static int clockevent_next_event(unsigned long cycles, + struct clock_event_device *clk_event_dev) +{ + u16 val; + + writew(cycles, gpt_base + LOAD(CLKEVT)); + + val = readw(gpt_base + CR(CLKEVT)); + val |= CTRL_ENABLE | CTRL_INT_ENABLE; + writew(val, gpt_base + CR(CLKEVT)); + + return 0; +} + +static irqreturn_t spear_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clkevt; + + writew(INT_STATUS, gpt_base + IR(CLKEVT)); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction spear_timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = spear_timer_interrupt +}; + +static void __init spear_clockevent_init(void) +{ + u32 tick_rate; + + /* program the prescaler */ + writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT)); + + tick_rate = clk_get_rate(gpt_clk); + tick_rate >>= CTRL_PRESCALER16; + + clockevent_set_clock(&clkevt, tick_rate); + + clkevt.max_delta_ns = clockevent_delta2ns(0xfff0, + &clkevt); + clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt); + + clkevt.cpumask = cpumask_of(0); + + clockevents_register_device(&clkevt); + + setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq); +} + +void __init spear_setup_timer(void) +{ + struct clk *pll3_clk; + + if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) { + pr_err("%s:cannot get IO addr\n", __func__); + return; + } + + gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K); + if (!gpt_base) { + pr_err("%s:ioremap failed for gpt\n", __func__); + goto err_mem; + } + + gpt_clk = clk_get_sys("gpt0", NULL); + if (!gpt_clk) { + pr_err("%s:couldn't get clk for gpt\n", __func__); + goto err_iomap; + } + + pll3_clk = clk_get(NULL, "pll3_48m_clk"); + if (!pll3_clk) { + pr_err("%s:couldn't get PLL3 as parent for gpt\n", __func__); + goto err_iomap; + } + + clk_set_parent(gpt_clk, pll3_clk); + + spear_clockevent_init(); + spear_clocksource_init(); + + return; + +err_iomap: + iounmap(gpt_base); + +err_mem: + release_mem_region(SPEAR_GPT0_BASE, SZ_1K); +} + +struct sys_timer spear_sys_timer = { + .init = spear_setup_timer, +}; diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile new file mode 100644 index 000000000000..9b1a66816aa6 --- /dev/null +++ b/arch/arm/plat-versatile/Makefile @@ -0,0 +1,4 @@ +obj-y := clock.o +obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o +obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o +obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/plat-versatile/clock.c index 989ecf5f5c46..5c8b6564fdc2 100644 --- a/arch/arm/mach-integrator/clock.c +++ b/arch/arm/plat-versatile/clock.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-integrator/clock.c + * linux/arch/arm/plat-versatile/clock.c * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. @@ -14,7 +14,8 @@ #include <linux/clk.h> #include <linux/mutex.h> -#include <asm/clkdev.h> +#include <asm/hardware/icst.h> + #include <mach/clkdev.h> int clk_enable(struct clk *clk) @@ -36,24 +37,38 @@ EXPORT_SYMBOL(clk_get_rate); long clk_round_rate(struct clk *clk, unsigned long rate) { - struct icst525_vco vco; - vco = icst525_khz_to_vco(clk->params, rate / 1000); - return icst525_khz(clk->params, vco) * 1000; + long ret = -EIO; + if (clk->ops && clk->ops->round) + ret = clk->ops->round(clk, rate); + return ret; } EXPORT_SYMBOL(clk_round_rate); int clk_set_rate(struct clk *clk, unsigned long rate) { int ret = -EIO; - - if (clk->setvco) { - struct icst525_vco vco; - - vco = icst525_khz_to_vco(clk->params, rate / 1000); - clk->rate = icst525_khz(clk->params, vco) * 1000; - clk->setvco(clk, vco); - ret = 0; - } + if (clk->ops && clk->ops->set) + ret = clk->ops->set(clk, rate); return ret; } EXPORT_SYMBOL(clk_set_rate); + +long icst_clk_round(struct clk *clk, unsigned long rate) +{ + struct icst_vco vco; + vco = icst_hz_to_vco(clk->params, rate); + return icst_hz(clk->params, vco); +} +EXPORT_SYMBOL(icst_clk_round); + +int icst_clk_set(struct clk *clk, unsigned long rate) +{ + struct icst_vco vco; + + vco = icst_hz_to_vco(clk->params, rate); + clk->rate = icst_hz(clk->params, vco); + clk->ops->setvco(clk, vco); + + return 0; +} +EXPORT_SYMBOL(icst_clk_set); diff --git a/arch/arm/plat-versatile/include/plat/clock.h b/arch/arm/plat-versatile/include/plat/clock.h new file mode 100644 index 000000000000..3cfb024ccd70 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/clock.h @@ -0,0 +1,15 @@ +#ifndef PLAT_CLOCK_H +#define PLAT_CLOCK_H + +#include <asm/hardware/icst.h> + +struct clk_ops { + long (*round)(struct clk *, unsigned long); + int (*set)(struct clk *, unsigned long); + void (*setvco)(struct clk *, struct icst_vco); +}; + +int icst_clk_set(struct clk *, unsigned long); +long icst_clk_round(struct clk *, unsigned long); + +#endif diff --git a/arch/arm/plat-versatile/include/plat/timer-sp.h b/arch/arm/plat-versatile/include/plat/timer-sp.h new file mode 100644 index 000000000000..21e75e30d497 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/timer-sp.h @@ -0,0 +1,2 @@ +void sp804_clocksource_init(void __iomem *); +void sp804_clockevents_init(void __iomem *, unsigned int); diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c new file mode 100644 index 000000000000..9768cf7e83d7 --- /dev/null +++ b/arch/arm/plat-versatile/sched-clock.c @@ -0,0 +1,53 @@ +/* + * linux/arch/arm/plat-versatile/sched-clock.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/cnt32_to_63.h> +#include <linux/io.h> +#include <asm/div64.h> + +#include <mach/hardware.h> +#include <mach/platform.h> + +#ifdef VERSATILE_SYS_BASE +#define REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET) +#endif + +#ifdef REALVIEW_SYS_BASE +#define REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) +#endif + +/* + * This is the Realview and Versatile sched_clock implementation. This + * has a resolution of 41.7ns, and a maximum value of about 35583 days. + * + * The return value is guaranteed to be monotonic in that range as + * long as there is always less than 89 seconds between successive + * calls to this function. + */ +unsigned long long sched_clock(void) +{ + unsigned long long v = cnt32_to_63(readl(REFCOUNTER)); + + /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */ + v *= 125<<1; + do_div(v, 3<<1); + + return v; +} diff --git a/arch/arm/plat-versatile/timer-sp.c b/arch/arm/plat-versatile/timer-sp.c new file mode 100644 index 000000000000..fb0d1c299718 --- /dev/null +++ b/arch/arm/plat-versatile/timer-sp.c @@ -0,0 +1,156 @@ +/* + * linux/arch/arm/plat-versatile/timer-sp.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/hardware/arm_timer.h> + +#include <plat/timer-sp.h> + +/* + * These timers are currently always setup to be clocked at 1MHz. + */ +#define TIMER_FREQ_KHZ (1000) +#define TIMER_RELOAD (TIMER_FREQ_KHZ * 1000 / HZ) + +static void __iomem *clksrc_base; + +static cycle_t sp804_read(struct clocksource *cs) +{ + return ~readl(clksrc_base + TIMER_VALUE); +} + +static struct clocksource clocksource_sp804 = { + .name = "timer3", + .rating = 200, + .read = sp804_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +void __init sp804_clocksource_init(void __iomem *base) +{ + struct clocksource *cs = &clocksource_sp804; + + clksrc_base = base; + + /* setup timer 0 as free-running clocksource */ + writel(0, clksrc_base + TIMER_CTRL); + writel(0xffffffff, clksrc_base + TIMER_LOAD); + writel(0xffffffff, clksrc_base + TIMER_VALUE); + writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, + clksrc_base + TIMER_CTRL); + + cs->mult = clocksource_khz2mult(TIMER_FREQ_KHZ, cs->shift); + clocksource_register(cs); +} + + +static void __iomem *clkevt_base; + +/* + * IRQ handler for the timer + */ +static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* clear the interrupt */ + writel(1, clkevt_base + TIMER_INTCLR); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static void sp804_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE; + + writel(ctrl, clkevt_base + TIMER_CTRL); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD); + ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; + break; + + case CLOCK_EVT_MODE_ONESHOT: + /* period set, and timer enabled in 'next_event' hook */ + ctrl |= TIMER_CTRL_ONESHOT; + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + break; + } + + writel(ctrl, clkevt_base + TIMER_CTRL); +} + +static int sp804_set_next_event(unsigned long next, + struct clock_event_device *evt) +{ + unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); + + writel(next, clkevt_base + TIMER_LOAD); + writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + + return 0; +} + +static struct clock_event_device sp804_clockevent = { + .name = "timer0", + .shift = 32, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = sp804_set_mode, + .set_next_event = sp804_set_next_event, + .rating = 300, + .cpumask = cpu_all_mask, +}; + +static struct irqaction sp804_timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = sp804_timer_interrupt, + .dev_id = &sp804_clockevent, +}; + +void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq) +{ + struct clock_event_device *evt = &sp804_clockevent; + + clkevt_base = base; + + evt->irq = timer_irq; + evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift); + evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt); + evt->min_delta_ns = clockevent_delta2ns(0xf, evt); + + setup_irq(timer_irq, &sp804_timer_irq); + clockevents_register_device(evt); +} diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 9c6170cd9aac..87ab0568bb0e 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -564,7 +564,7 @@ config I2C_STU300 config I2C_VERSATILE tristate "ARM Versatile/Realview I2C bus support" - depends on ARCH_VERSATILE || ARCH_REALVIEW + depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS select I2C_ALGOBIT help Say yes if you want to support the I2C serial bus on ARMs Versatile diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 64c102355f53..a8293388d019 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -143,19 +143,6 @@ config KEYBOARD_BFIN To compile this driver as a module, choose M here: the module will be called bf54x-keys. -config KEYBOARD_CORGI - tristate "Corgi keyboard (deprecated)" - depends on PXA_SHARPSL - help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx - series of PDAs. - - This driver is now deprecated, use generic GPIO based matrix - keyboard driver instead. - - To compile this driver as a module, choose M here: the - module will be called corgikbd. - config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" select SERIO @@ -339,19 +326,6 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. -config KEYBOARD_SPITZ - tristate "Spitz keyboard (deprecated)" - depends on PXA_SHARPSL - help - Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, - SL-C3000 and Sl-C3100 series of PDAs. - - This driver is now deprecated, use generic GPIO based matrix - keyboard driver instead. - - To compile this driver as a module, choose M here: the - module will be called spitzkbd. - config KEYBOARD_STOWAWAY tristate "Stowaway keyboard" select SERIO @@ -414,28 +388,6 @@ config KEYBOARD_TWL4030 To compile this driver as a module, choose M here: the module will be called twl4030_keypad. -config KEYBOARD_TOSA - tristate "Tosa keyboard (deprecated)" - depends on MACH_TOSA - help - Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) - - This driver is now deprecated, use generic GPIO based matrix - keyboard driver instead. - - To compile this driver as a module, choose M here: the - module will be called tosakbd. - -config KEYBOARD_TOSA_USE_EXT_KEYCODES - bool "Tosa keyboard: use extended keycodes" - depends on KEYBOARD_TOSA - help - Say Y here to enable the tosa keyboard driver to generate extended - (>= 127) keycodes. Be aware, that they can't be correctly interpreted - by either console keyboard driver or by Kdrive keybd driver. - - Say Y only if you know, what you are doing! - config KEYBOARD_XTKBD tristate "XT keyboard" select SERIO diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 706c6b5ed5f4..9a74127e4d17 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o -obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o @@ -33,10 +32,8 @@ obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o -obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o -obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c deleted file mode 100644 index 634af6a8e6b3..000000000000 --- a/drivers/input/keyboard/corgikbd.c +++ /dev/null @@ -1,414 +0,0 @@ -/* - * Keyboard driver for Sharp Corgi models (SL-C7xx) - * - * Copyright (c) 2004-2005 Richard Purdie - * - * Based on xtkbd.c/locomkbd.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/jiffies.h> -#include <linux/module.h> -#include <linux/slab.h> - -#include <mach/corgi.h> -#include <mach/pxa2xx-gpio.h> -#include <asm/hardware/scoop.h> - -#define KB_ROWS 8 -#define KB_COLS 12 -#define KB_ROWMASK(r) (1 << (r)) -#define SCANCODE(r,c) ( ((r)<<4) + (c) + 1 ) -/* zero code, 124 scancodes */ -#define NR_SCANCODES ( SCANCODE(KB_ROWS-1,KB_COLS-1) +1 +1 ) - -#define SCAN_INTERVAL (50) /* ms */ -#define HINGE_SCAN_INTERVAL (250) /* ms */ - -#define CORGI_KEY_CALENDER KEY_F1 -#define CORGI_KEY_ADDRESS KEY_F2 -#define CORGI_KEY_FN KEY_F3 -#define CORGI_KEY_CANCEL KEY_F4 -#define CORGI_KEY_OFF KEY_SUSPEND -#define CORGI_KEY_EXOK KEY_F5 -#define CORGI_KEY_EXCANCEL KEY_F6 -#define CORGI_KEY_EXJOGDOWN KEY_F7 -#define CORGI_KEY_EXJOGUP KEY_F8 -#define CORGI_KEY_JAP1 KEY_LEFTCTRL -#define CORGI_KEY_JAP2 KEY_LEFTALT -#define CORGI_KEY_MAIL KEY_F10 -#define CORGI_KEY_OK KEY_F11 -#define CORGI_KEY_MENU KEY_F12 - -static unsigned char corgikbd_keycode[NR_SCANCODES] = { - 0, /* 0 */ - 0, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, 0, 0, 0, 0, 0, 0, 0, /* 1-16 */ - 0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, 0, 0, 0, 0, 0, 0, 0, /* 17-32 */ - KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */ - CORGI_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */ - CORGI_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, 0, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, /* 65-80 */ - CORGI_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, 0, CORGI_KEY_FN, 0, 0, 0, 0, /* 81-96 */ - KEY_SYSRQ, CORGI_KEY_JAP1, CORGI_KEY_JAP2, CORGI_KEY_CANCEL, CORGI_KEY_OK, CORGI_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0, /* 97-112 */ - CORGI_KEY_OFF, CORGI_KEY_EXOK, CORGI_KEY_EXCANCEL, CORGI_KEY_EXJOGDOWN, CORGI_KEY_EXJOGUP, 0, 0, 0, 0, 0, 0, 0, /* 113-124 */ -}; - - -struct corgikbd { - unsigned char keycode[ARRAY_SIZE(corgikbd_keycode)]; - struct input_dev *input; - - spinlock_t lock; - struct timer_list timer; - struct timer_list htimer; - - unsigned int suspended; - unsigned long suspend_jiffies; -}; - -#define KB_DISCHARGE_DELAY 10 -#define KB_ACTIVATE_DELAY 10 - -/* Helper functions for reading the keyboard matrix - * Note: We should really be using the generic gpio functions to alter - * GPDR but it requires a function call per GPIO bit which is - * excessive when we need to access 12 bits at once, multiple times. - * These functions must be called within local_irq_save()/local_irq_restore() - * or similar. - */ -static inline void corgikbd_discharge_all(void) -{ - /* STROBE All HiZ */ - GPCR2 = CORGI_GPIO_ALL_STROBE_BIT; - GPDR2 &= ~CORGI_GPIO_ALL_STROBE_BIT; -} - -static inline void corgikbd_activate_all(void) -{ - /* STROBE ALL -> High */ - GPSR2 = CORGI_GPIO_ALL_STROBE_BIT; - GPDR2 |= CORGI_GPIO_ALL_STROBE_BIT; - - udelay(KB_DISCHARGE_DELAY); - - /* Clear any interrupts we may have triggered when altering the GPIO lines */ - GEDR1 = CORGI_GPIO_HIGH_SENSE_BIT; - GEDR2 = CORGI_GPIO_LOW_SENSE_BIT; -} - -static inline void corgikbd_activate_col(int col) -{ - /* STROBE col -> High, not col -> HiZ */ - GPSR2 = CORGI_GPIO_STROBE_BIT(col); - GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); -} - -static inline void corgikbd_reset_col(int col) -{ - /* STROBE col -> Low */ - GPCR2 = CORGI_GPIO_STROBE_BIT(col); - /* STROBE col -> out, not col -> HiZ */ - GPDR2 = (GPDR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(col); -} - -#define GET_ROWS_STATUS(c) (((GPLR1 & CORGI_GPIO_HIGH_SENSE_BIT) >> CORGI_GPIO_HIGH_SENSE_RSHIFT) | ((GPLR2 & CORGI_GPIO_LOW_SENSE_BIT) << CORGI_GPIO_LOW_SENSE_LSHIFT)) - -/* - * The corgi keyboard only generates interrupts when a key is pressed. - * When a key is pressed, we enable a timer which then scans the - * keyboard to detect when the key is released. - */ - -/* Scan the hardware keyboard and push any changes up through the input layer */ -static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data) -{ - unsigned int row, col, rowd; - unsigned long flags; - unsigned int num_pressed; - - if (corgikbd_data->suspended) - return; - - spin_lock_irqsave(&corgikbd_data->lock, flags); - - num_pressed = 0; - for (col = 0; col < KB_COLS; col++) { - /* - * Discharge the output driver capacitatance - * in the keyboard matrix. (Yes it is significant..) - */ - - corgikbd_discharge_all(); - udelay(KB_DISCHARGE_DELAY); - - corgikbd_activate_col(col); - udelay(KB_ACTIVATE_DELAY); - - rowd = GET_ROWS_STATUS(col); - for (row = 0; row < KB_ROWS; row++) { - unsigned int scancode, pressed; - - scancode = SCANCODE(row, col); - pressed = rowd & KB_ROWMASK(row); - - input_report_key(corgikbd_data->input, corgikbd_data->keycode[scancode], pressed); - - if (pressed) - num_pressed++; - - if (pressed && (corgikbd_data->keycode[scancode] == CORGI_KEY_OFF) - && time_after(jiffies, corgikbd_data->suspend_jiffies + HZ)) { - input_event(corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1); - corgikbd_data->suspend_jiffies=jiffies; - } - } - corgikbd_reset_col(col); - } - - corgikbd_activate_all(); - - input_sync(corgikbd_data->input); - - /* if any keys are pressed, enable the timer */ - if (num_pressed) - mod_timer(&corgikbd_data->timer, jiffies + msecs_to_jiffies(SCAN_INTERVAL)); - - spin_unlock_irqrestore(&corgikbd_data->lock, flags); -} - -/* - * corgi keyboard interrupt handler. - */ -static irqreturn_t corgikbd_interrupt(int irq, void *dev_id) -{ - struct corgikbd *corgikbd_data = dev_id; - - if (!timer_pending(&corgikbd_data->timer)) { - /** wait chattering delay **/ - udelay(20); - corgikbd_scankeyboard(corgikbd_data); - } - - return IRQ_HANDLED; -} - -/* - * corgi timer checking for released keys - */ -static void corgikbd_timer_callback(unsigned long data) -{ - struct corgikbd *corgikbd_data = (struct corgikbd *) data; - corgikbd_scankeyboard(corgikbd_data); -} - -/* - * The hinge switches generate no interrupt so they need to be - * monitored by a timer. - * - * We debounce the switches and pass them to the input system. - * - * gprr == 0x00 - Keyboard with Landscape Screen - * 0x08 - No Keyboard with Portrait Screen - * 0x0c - Keyboard and Screen Closed - */ - -#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) -#define HINGE_STABLE_COUNT 2 -static int sharpsl_hinge_state; -static int hinge_count; - -static void corgikbd_hinge_timer(unsigned long data) -{ - struct corgikbd *corgikbd_data = (struct corgikbd *) data; - unsigned long gprr; - unsigned long flags; - - gprr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_GPRR) & (CORGI_SCP_SWA | CORGI_SCP_SWB); - gprr |= (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0); - if (gprr != sharpsl_hinge_state) { - hinge_count = 0; - sharpsl_hinge_state = gprr; - } else if (hinge_count < HINGE_STABLE_COUNT) { - hinge_count++; - if (hinge_count >= HINGE_STABLE_COUNT) { - spin_lock_irqsave(&corgikbd_data->lock, flags); - - input_report_switch(corgikbd_data->input, SW_LID, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0)); - input_report_switch(corgikbd_data->input, SW_TABLET_MODE, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0)); - input_report_switch(corgikbd_data->input, SW_HEADPHONE_INSERT, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0)); - input_sync(corgikbd_data->input); - - spin_unlock_irqrestore(&corgikbd_data->lock, flags); - } - } - mod_timer(&corgikbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); -} - -#ifdef CONFIG_PM -static int corgikbd_suspend(struct platform_device *dev, pm_message_t state) -{ - int i; - struct corgikbd *corgikbd = platform_get_drvdata(dev); - - corgikbd->suspended = 1; - /* strobe 0 is the power key so this can't be made an input for - powersaving therefore i = 1 */ - for (i = 1; i < CORGI_KEY_STROBE_NUM; i++) - pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_IN); - - return 0; -} - -static int corgikbd_resume(struct platform_device *dev) -{ - int i; - struct corgikbd *corgikbd = platform_get_drvdata(dev); - - for (i = 1; i < CORGI_KEY_STROBE_NUM; i++) - pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH); - - /* Upon resume, ignore the suspend key for a short while */ - corgikbd->suspend_jiffies=jiffies; - corgikbd->suspended = 0; - - return 0; -} -#else -#define corgikbd_suspend NULL -#define corgikbd_resume NULL -#endif - -static int __devinit corgikbd_probe(struct platform_device *pdev) -{ - struct corgikbd *corgikbd; - struct input_dev *input_dev; - int i, err = -ENOMEM; - - corgikbd = kzalloc(sizeof(struct corgikbd), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!corgikbd || !input_dev) - goto fail; - - platform_set_drvdata(pdev, corgikbd); - - corgikbd->input = input_dev; - spin_lock_init(&corgikbd->lock); - - /* Init Keyboard rescan timer */ - init_timer(&corgikbd->timer); - corgikbd->timer.function = corgikbd_timer_callback; - corgikbd->timer.data = (unsigned long) corgikbd; - - /* Init Hinge Timer */ - init_timer(&corgikbd->htimer); - corgikbd->htimer.function = corgikbd_hinge_timer; - corgikbd->htimer.data = (unsigned long) corgikbd; - - corgikbd->suspend_jiffies=jiffies; - - memcpy(corgikbd->keycode, corgikbd_keycode, sizeof(corgikbd->keycode)); - - input_dev->name = "Corgi Keyboard"; - input_dev->phys = "corgikbd/input0"; - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x0001; - input_dev->id.product = 0x0001; - input_dev->id.version = 0x0100; - input_dev->dev.parent = &pdev->dev; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | - BIT_MASK(EV_PWR) | BIT_MASK(EV_SW); - input_dev->keycode = corgikbd->keycode; - input_dev->keycodesize = sizeof(unsigned char); - input_dev->keycodemax = ARRAY_SIZE(corgikbd_keycode); - - for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++) - set_bit(corgikbd->keycode[i], input_dev->keybit); - clear_bit(0, input_dev->keybit); - set_bit(SW_LID, input_dev->swbit); - set_bit(SW_TABLET_MODE, input_dev->swbit); - set_bit(SW_HEADPHONE_INSERT, input_dev->swbit); - - err = input_register_device(corgikbd->input); - if (err) - goto fail; - - mod_timer(&corgikbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); - - /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ - for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) { - pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN); - if (request_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING, - "corgikbd", corgikbd)) - printk(KERN_WARNING "corgikbd: Can't get IRQ: %d!\n", i); - } - - /* Set Strobe lines as outputs - set high */ - for (i = 0; i < CORGI_KEY_STROBE_NUM; i++) - pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH); - - /* Setup the headphone jack as an input */ - pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN); - - return 0; - - fail: input_free_device(input_dev); - kfree(corgikbd); - return err; -} - -static int __devexit corgikbd_remove(struct platform_device *pdev) -{ - int i; - struct corgikbd *corgikbd = platform_get_drvdata(pdev); - - for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) - free_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd); - - del_timer_sync(&corgikbd->htimer); - del_timer_sync(&corgikbd->timer); - - input_unregister_device(corgikbd->input); - - kfree(corgikbd); - - return 0; -} - -static struct platform_driver corgikbd_driver = { - .probe = corgikbd_probe, - .remove = __devexit_p(corgikbd_remove), - .suspend = corgikbd_suspend, - .resume = corgikbd_resume, - .driver = { - .name = "corgi-keyboard", - .owner = THIS_MODULE, - }, -}; - -static int __init corgikbd_init(void) -{ - return platform_driver_register(&corgikbd_driver); -} - -static void __exit corgikbd_exit(void) -{ - platform_driver_unregister(&corgikbd_driver); -} - -module_init(corgikbd_init); -module_exit(corgikbd_exit); - -MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>"); -MODULE_DESCRIPTION("Corgi Keyboard Driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:corgi-keyboard"); diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c deleted file mode 100644 index 13967422658c..000000000000 --- a/drivers/input/keyboard/spitzkbd.c +++ /dev/null @@ -1,496 +0,0 @@ -/* - * Keyboard driver for Sharp Spitz, Borzoi and Akita (SL-Cxx00 series) - * - * Copyright (c) 2005 Richard Purdie - * - * Based on corgikbd.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/jiffies.h> -#include <linux/module.h> -#include <linux/slab.h> - -#include <mach/spitz.h> -#include <mach/pxa2xx-gpio.h> - -#define KB_ROWS 7 -#define KB_COLS 11 -#define KB_ROWMASK(r) (1 << (r)) -#define SCANCODE(r,c) (((r)<<4) + (c) + 1) -#define NR_SCANCODES ((KB_ROWS<<4) + 1) - -#define SCAN_INTERVAL (50) /* ms */ -#define HINGE_SCAN_INTERVAL (150) /* ms */ - -#define SPITZ_KEY_CALENDER KEY_F1 -#define SPITZ_KEY_ADDRESS KEY_F2 -#define SPITZ_KEY_FN KEY_F3 -#define SPITZ_KEY_CANCEL KEY_F4 -#define SPITZ_KEY_EXOK KEY_F5 -#define SPITZ_KEY_EXCANCEL KEY_F6 -#define SPITZ_KEY_EXJOGDOWN KEY_F7 -#define SPITZ_KEY_EXJOGUP KEY_F8 -#define SPITZ_KEY_JAP1 KEY_LEFTALT -#define SPITZ_KEY_JAP2 KEY_RIGHTCTRL -#define SPITZ_KEY_SYNC KEY_F9 -#define SPITZ_KEY_MAIL KEY_F10 -#define SPITZ_KEY_OK KEY_F11 -#define SPITZ_KEY_MENU KEY_F12 - -static unsigned char spitzkbd_keycode[NR_SCANCODES] = { - 0, /* 0 */ - KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0, /* 1-16 */ - 0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */ - KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */ - SPITZ_KEY_ADDRESS, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */ - SPITZ_KEY_CALENDER, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, /* 65-80 */ - SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0, /* 81-96 */ - KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0 /* 97-112 */ -}; - -static int spitz_strobes[] = { - SPITZ_GPIO_KEY_STROBE0, - SPITZ_GPIO_KEY_STROBE1, - SPITZ_GPIO_KEY_STROBE2, - SPITZ_GPIO_KEY_STROBE3, - SPITZ_GPIO_KEY_STROBE4, - SPITZ_GPIO_KEY_STROBE5, - SPITZ_GPIO_KEY_STROBE6, - SPITZ_GPIO_KEY_STROBE7, - SPITZ_GPIO_KEY_STROBE8, - SPITZ_GPIO_KEY_STROBE9, - SPITZ_GPIO_KEY_STROBE10, -}; - -static int spitz_senses[] = { - SPITZ_GPIO_KEY_SENSE0, - SPITZ_GPIO_KEY_SENSE1, - SPITZ_GPIO_KEY_SENSE2, - SPITZ_GPIO_KEY_SENSE3, - SPITZ_GPIO_KEY_SENSE4, - SPITZ_GPIO_KEY_SENSE5, - SPITZ_GPIO_KEY_SENSE6, -}; - -struct spitzkbd { - unsigned char keycode[ARRAY_SIZE(spitzkbd_keycode)]; - struct input_dev *input; - char phys[32]; - - spinlock_t lock; - struct timer_list timer; - struct timer_list htimer; - - unsigned int suspended; - unsigned long suspend_jiffies; -}; - -#define KB_DISCHARGE_DELAY 10 -#define KB_ACTIVATE_DELAY 10 - -/* Helper functions for reading the keyboard matrix - * Note: We should really be using the generic gpio functions to alter - * GPDR but it requires a function call per GPIO bit which is - * excessive when we need to access 11 bits at once, multiple times. - * These functions must be called within local_irq_save()/local_irq_restore() - * or similar. - */ -static inline void spitzkbd_discharge_all(void) -{ - /* STROBE All HiZ */ - GPCR0 = SPITZ_GPIO_G0_STROBE_BIT; - GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; - GPCR1 = SPITZ_GPIO_G1_STROBE_BIT; - GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; - GPCR2 = SPITZ_GPIO_G2_STROBE_BIT; - GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; - GPCR3 = SPITZ_GPIO_G3_STROBE_BIT; - GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; -} - -static inline void spitzkbd_activate_all(void) -{ - /* STROBE ALL -> High */ - GPSR0 = SPITZ_GPIO_G0_STROBE_BIT; - GPDR0 |= SPITZ_GPIO_G0_STROBE_BIT; - GPSR1 = SPITZ_GPIO_G1_STROBE_BIT; - GPDR1 |= SPITZ_GPIO_G1_STROBE_BIT; - GPSR2 = SPITZ_GPIO_G2_STROBE_BIT; - GPDR2 |= SPITZ_GPIO_G2_STROBE_BIT; - GPSR3 = SPITZ_GPIO_G3_STROBE_BIT; - GPDR3 |= SPITZ_GPIO_G3_STROBE_BIT; - - udelay(KB_DISCHARGE_DELAY); - - /* Clear any interrupts we may have triggered when altering the GPIO lines */ - GEDR0 = SPITZ_GPIO_G0_SENSE_BIT; - GEDR1 = SPITZ_GPIO_G1_SENSE_BIT; - GEDR2 = SPITZ_GPIO_G2_SENSE_BIT; - GEDR3 = SPITZ_GPIO_G3_SENSE_BIT; -} - -static inline void spitzkbd_activate_col(int col) -{ - int gpio = spitz_strobes[col]; - GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; - GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; - GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; - GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; - GPSR(gpio) = GPIO_bit(gpio); - GPDR(gpio) |= GPIO_bit(gpio); -} - -static inline void spitzkbd_reset_col(int col) -{ - int gpio = spitz_strobes[col]; - GPDR0 &= ~SPITZ_GPIO_G0_STROBE_BIT; - GPDR1 &= ~SPITZ_GPIO_G1_STROBE_BIT; - GPDR2 &= ~SPITZ_GPIO_G2_STROBE_BIT; - GPDR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; - GPCR(gpio) = GPIO_bit(gpio); - GPDR(gpio) |= GPIO_bit(gpio); -} - -static inline int spitzkbd_get_row_status(int col) -{ - return ((GPLR0 >> 12) & 0x01) | ((GPLR0 >> 16) & 0x02) - | ((GPLR2 >> 25) & 0x04) | ((GPLR1 << 1) & 0x08) - | ((GPLR1 >> 0) & 0x10) | ((GPLR1 >> 1) & 0x60); -} - -/* - * The spitz keyboard only generates interrupts when a key is pressed. - * When a key is pressed, we enable a timer which then scans the - * keyboard to detect when the key is released. - */ - -/* Scan the hardware keyboard and push any changes up through the input layer */ -static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data) -{ - unsigned int row, col, rowd; - unsigned long flags; - unsigned int num_pressed, pwrkey = ((GPLR(SPITZ_GPIO_ON_KEY) & GPIO_bit(SPITZ_GPIO_ON_KEY)) != 0); - - if (spitzkbd_data->suspended) - return; - - spin_lock_irqsave(&spitzkbd_data->lock, flags); - - num_pressed = 0; - for (col = 0; col < KB_COLS; col++) { - /* - * Discharge the output driver capacitatance - * in the keyboard matrix. (Yes it is significant..) - */ - - spitzkbd_discharge_all(); - udelay(KB_DISCHARGE_DELAY); - - spitzkbd_activate_col(col); - udelay(KB_ACTIVATE_DELAY); - - rowd = spitzkbd_get_row_status(col); - for (row = 0; row < KB_ROWS; row++) { - unsigned int scancode, pressed; - - scancode = SCANCODE(row, col); - pressed = rowd & KB_ROWMASK(row); - - input_report_key(spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed); - - if (pressed) - num_pressed++; - } - spitzkbd_reset_col(col); - } - - spitzkbd_activate_all(); - - input_report_key(spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 ); - input_report_key(spitzkbd_data->input, KEY_SUSPEND, pwrkey); - - if (pwrkey && time_after(jiffies, spitzkbd_data->suspend_jiffies + msecs_to_jiffies(1000))) { - input_event(spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1); - spitzkbd_data->suspend_jiffies = jiffies; - } - - input_sync(spitzkbd_data->input); - - /* if any keys are pressed, enable the timer */ - if (num_pressed) - mod_timer(&spitzkbd_data->timer, jiffies + msecs_to_jiffies(SCAN_INTERVAL)); - - spin_unlock_irqrestore(&spitzkbd_data->lock, flags); -} - -/* - * spitz keyboard interrupt handler. - */ -static irqreturn_t spitzkbd_interrupt(int irq, void *dev_id) -{ - struct spitzkbd *spitzkbd_data = dev_id; - - if (!timer_pending(&spitzkbd_data->timer)) { - /** wait chattering delay **/ - udelay(20); - spitzkbd_scankeyboard(spitzkbd_data); - } - - return IRQ_HANDLED; -} - -/* - * spitz timer checking for released keys - */ -static void spitzkbd_timer_callback(unsigned long data) -{ - struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data; - - spitzkbd_scankeyboard(spitzkbd_data); -} - -/* - * The hinge switches generate an interrupt. - * We debounce the switches and pass them to the input system. - */ - -static irqreturn_t spitzkbd_hinge_isr(int irq, void *dev_id) -{ - struct spitzkbd *spitzkbd_data = dev_id; - - if (!timer_pending(&spitzkbd_data->htimer)) - mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); - - return IRQ_HANDLED; -} - -#define HINGE_STABLE_COUNT 2 -static int sharpsl_hinge_state; -static int hinge_count; - -static void spitzkbd_hinge_timer(unsigned long data) -{ - struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data; - unsigned long state; - unsigned long flags; - - state = GPLR(SPITZ_GPIO_SWA) & (GPIO_bit(SPITZ_GPIO_SWA)|GPIO_bit(SPITZ_GPIO_SWB)); - state |= (GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)); - if (state != sharpsl_hinge_state) { - hinge_count = 0; - sharpsl_hinge_state = state; - } else if (hinge_count < HINGE_STABLE_COUNT) { - hinge_count++; - } - - if (hinge_count >= HINGE_STABLE_COUNT) { - spin_lock_irqsave(&spitzkbd_data->lock, flags); - - input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0)); - input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0)); - input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0)); - input_sync(spitzkbd_data->input); - - spin_unlock_irqrestore(&spitzkbd_data->lock, flags); - } else { - mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); - } -} - -#ifdef CONFIG_PM -static int spitzkbd_suspend(struct platform_device *dev, pm_message_t state) -{ - int i; - struct spitzkbd *spitzkbd = platform_get_drvdata(dev); - spitzkbd->suspended = 1; - - /* Set Strobe lines as inputs - *except* strobe line 0 leave this - enabled so we can detect a power button press for resume */ - for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++) - pxa_gpio_mode(spitz_strobes[i] | GPIO_IN); - - return 0; -} - -static int spitzkbd_resume(struct platform_device *dev) -{ - int i; - struct spitzkbd *spitzkbd = platform_get_drvdata(dev); - - for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++) - pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH); - - /* Upon resume, ignore the suspend key for a short while */ - spitzkbd->suspend_jiffies = jiffies; - spitzkbd->suspended = 0; - - return 0; -} -#else -#define spitzkbd_suspend NULL -#define spitzkbd_resume NULL -#endif - -static int __devinit spitzkbd_probe(struct platform_device *dev) -{ - struct spitzkbd *spitzkbd; - struct input_dev *input_dev; - int i, err = -ENOMEM; - - spitzkbd = kzalloc(sizeof(struct spitzkbd), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!spitzkbd || !input_dev) - goto fail; - - platform_set_drvdata(dev, spitzkbd); - strcpy(spitzkbd->phys, "spitzkbd/input0"); - - spin_lock_init(&spitzkbd->lock); - - /* Init Keyboard rescan timer */ - init_timer(&spitzkbd->timer); - spitzkbd->timer.function = spitzkbd_timer_callback; - spitzkbd->timer.data = (unsigned long) spitzkbd; - - /* Init Hinge Timer */ - init_timer(&spitzkbd->htimer); - spitzkbd->htimer.function = spitzkbd_hinge_timer; - spitzkbd->htimer.data = (unsigned long) spitzkbd; - - spitzkbd->suspend_jiffies = jiffies; - - spitzkbd->input = input_dev; - - input_dev->name = "Spitz Keyboard"; - input_dev->phys = spitzkbd->phys; - input_dev->dev.parent = &dev->dev; - - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x0001; - input_dev->id.product = 0x0001; - input_dev->id.version = 0x0100; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | - BIT_MASK(EV_PWR) | BIT_MASK(EV_SW); - input_dev->keycode = spitzkbd->keycode; - input_dev->keycodesize = sizeof(unsigned char); - input_dev->keycodemax = ARRAY_SIZE(spitzkbd_keycode); - - memcpy(spitzkbd->keycode, spitzkbd_keycode, sizeof(spitzkbd->keycode)); - for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++) - set_bit(spitzkbd->keycode[i], input_dev->keybit); - clear_bit(0, input_dev->keybit); - set_bit(KEY_SUSPEND, input_dev->keybit); - set_bit(SW_LID, input_dev->swbit); - set_bit(SW_TABLET_MODE, input_dev->swbit); - set_bit(SW_HEADPHONE_INSERT, input_dev->swbit); - - err = input_register_device(input_dev); - if (err) - goto fail; - - mod_timer(&spitzkbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); - - /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ - for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) { - pxa_gpio_mode(spitz_senses[i] | GPIO_IN); - if (request_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd_interrupt, - IRQF_DISABLED|IRQF_TRIGGER_RISING, - "Spitzkbd Sense", spitzkbd)) - printk(KERN_WARNING "spitzkbd: Can't get Sense IRQ: %d!\n", i); - } - - /* Set Strobe lines as outputs - set high */ - for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++) - pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH); - - pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_ON_KEY | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_SWA | GPIO_IN); - pxa_gpio_mode(SPITZ_GPIO_SWB | GPIO_IN); - - request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "Spitzkbd Sync", spitzkbd); - request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "Spitzkbd PwrOn", spitzkbd); - request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "Spitzkbd SWA", spitzkbd); - request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "Spitzkbd SWB", spitzkbd); - request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr, - IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - "Spitzkbd HP", spitzkbd); - - return 0; - - fail: input_free_device(input_dev); - kfree(spitzkbd); - return err; -} - -static int __devexit spitzkbd_remove(struct platform_device *dev) -{ - int i; - struct spitzkbd *spitzkbd = platform_get_drvdata(dev); - - for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) - free_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd); - - free_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd); - free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd); - free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd); - free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd); - free_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd); - - del_timer_sync(&spitzkbd->htimer); - del_timer_sync(&spitzkbd->timer); - - input_unregister_device(spitzkbd->input); - - kfree(spitzkbd); - - return 0; -} - -static struct platform_driver spitzkbd_driver = { - .probe = spitzkbd_probe, - .remove = __devexit_p(spitzkbd_remove), - .suspend = spitzkbd_suspend, - .resume = spitzkbd_resume, - .driver = { - .name = "spitz-keyboard", - .owner = THIS_MODULE, - }, -}; - -static int __init spitzkbd_init(void) -{ - return platform_driver_register(&spitzkbd_driver); -} - -static void __exit spitzkbd_exit(void) -{ - platform_driver_unregister(&spitzkbd_driver); -} - -module_init(spitzkbd_init); -module_exit(spitzkbd_exit); - -MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>"); -MODULE_DESCRIPTION("Spitz Keyboard Driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:spitz-keyboard"); diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c deleted file mode 100644 index 3910f269cfc8..000000000000 --- a/drivers/input/keyboard/tosakbd.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * Keyboard driver for Sharp Tosa models (SL-6000x) - * - * Copyright (c) 2005 Dirk Opfer - * Copyright (c) 2007 Dmitry Baryshkov - * - * Based on xtkbd.c/locomkbd.c/corgikbd.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/slab.h> - -#include <mach/gpio.h> -#include <mach/tosa.h> - -#define KB_ROWMASK(r) (1 << (r)) -#define SCANCODE(r, c) (((r)<<4) + (c) + 1) -#define NR_SCANCODES SCANCODE(TOSA_KEY_SENSE_NUM - 1, TOSA_KEY_STROBE_NUM - 1) + 1 - -#define SCAN_INTERVAL (HZ/10) - -#define KB_DISCHARGE_DELAY 10 -#define KB_ACTIVATE_DELAY 10 - -static unsigned short tosakbd_keycode[NR_SCANCODES] = { -0, -0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P, -0, 0, 0, 0, 0, 0, 0, 0, -KEY_Q, KEY_E, KEY_T, KEY_Y, 0, KEY_O, KEY_I, KEY_COMMA, -0, 0, 0, 0, 0, 0, 0, 0, -KEY_A, KEY_D, KEY_G, KEY_U, 0, KEY_L, KEY_ENTER, KEY_DOT, -0, 0, 0, 0, 0, 0, 0, 0, -KEY_Z, KEY_C, KEY_V, KEY_J, TOSA_KEY_ADDRESSBOOK, TOSA_KEY_CANCEL, TOSA_KEY_CENTER, TOSA_KEY_OK, -KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, 0, -KEY_S, KEY_R, KEY_B, KEY_N, TOSA_KEY_CALENDAR, TOSA_KEY_HOMEPAGE, KEY_LEFTCTRL, TOSA_KEY_LIGHT, -0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, -KEY_TAB, KEY_SLASH, KEY_H, KEY_M, TOSA_KEY_MENU, 0, KEY_UP, 0, -0, 0, TOSA_KEY_FN, 0, 0, 0, 0, 0, -KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_RIGHT, -0, 0, 0, -}; - -struct tosakbd { - unsigned short keycode[ARRAY_SIZE(tosakbd_keycode)]; - struct input_dev *input; - bool suspended; - spinlock_t lock; /* protect kbd scanning */ - struct timer_list timer; -}; - - -/* Helper functions for reading the keyboard matrix - * Note: We should really be using the generic gpio functions to alter - * GPDR but it requires a function call per GPIO bit which is - * excessive when we need to access 12 bits at once, multiple times. - * These functions must be called within local_irq_save()/local_irq_restore() - * or similar. - */ -#define GET_ROWS_STATUS(c) ((GPLR2 & TOSA_GPIO_ALL_SENSE_BIT) >> TOSA_GPIO_ALL_SENSE_RSHIFT) - -static inline void tosakbd_discharge_all(void) -{ - /* STROBE All HiZ */ - GPCR1 = TOSA_GPIO_HIGH_STROBE_BIT; - GPDR1 &= ~TOSA_GPIO_HIGH_STROBE_BIT; - GPCR2 = TOSA_GPIO_LOW_STROBE_BIT; - GPDR2 &= ~TOSA_GPIO_LOW_STROBE_BIT; -} - -static inline void tosakbd_activate_all(void) -{ - /* STROBE ALL -> High */ - GPSR1 = TOSA_GPIO_HIGH_STROBE_BIT; - GPDR1 |= TOSA_GPIO_HIGH_STROBE_BIT; - GPSR2 = TOSA_GPIO_LOW_STROBE_BIT; - GPDR2 |= TOSA_GPIO_LOW_STROBE_BIT; - - udelay(KB_DISCHARGE_DELAY); - - /* STATE CLEAR */ - GEDR2 |= TOSA_GPIO_ALL_SENSE_BIT; -} - -static inline void tosakbd_activate_col(int col) -{ - if (col <= 5) { - /* STROBE col -> High, not col -> HiZ */ - GPSR1 = TOSA_GPIO_STROBE_BIT(col); - GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } else { - /* STROBE col -> High, not col -> HiZ */ - GPSR2 = TOSA_GPIO_STROBE_BIT(col); - GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } -} - -static inline void tosakbd_reset_col(int col) -{ - if (col <= 5) { - /* STROBE col -> Low */ - GPCR1 = TOSA_GPIO_STROBE_BIT(col); - /* STROBE col -> out, not col -> HiZ */ - GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } else { - /* STROBE col -> Low */ - GPCR2 = TOSA_GPIO_STROBE_BIT(col); - /* STROBE col -> out, not col -> HiZ */ - GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); - } -} -/* - * The tosa keyboard only generates interrupts when a key is pressed. - * So when a key is pressed, we enable a timer. This timer scans the - * keyboard, and this is how we detect when the key is released. - */ - -/* Scan the hardware keyboard and push any changes up through the input layer */ -static void tosakbd_scankeyboard(struct platform_device *dev) -{ - struct tosakbd *tosakbd = platform_get_drvdata(dev); - unsigned int row, col, rowd; - unsigned long flags; - unsigned int num_pressed = 0; - - spin_lock_irqsave(&tosakbd->lock, flags); - - if (tosakbd->suspended) - goto out; - - for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) { - /* - * Discharge the output driver capacitatance - * in the keyboard matrix. (Yes it is significant..) - */ - tosakbd_discharge_all(); - udelay(KB_DISCHARGE_DELAY); - - tosakbd_activate_col(col); - udelay(KB_ACTIVATE_DELAY); - - rowd = GET_ROWS_STATUS(col); - - for (row = 0; row < TOSA_KEY_SENSE_NUM; row++) { - unsigned int scancode, pressed; - scancode = SCANCODE(row, col); - pressed = rowd & KB_ROWMASK(row); - - if (pressed && !tosakbd->keycode[scancode]) - dev_warn(&dev->dev, - "unhandled scancode: 0x%02x\n", - scancode); - - input_report_key(tosakbd->input, - tosakbd->keycode[scancode], - pressed); - if (pressed) - num_pressed++; - } - - tosakbd_reset_col(col); - } - - tosakbd_activate_all(); - - input_sync(tosakbd->input); - - /* if any keys are pressed, enable the timer */ - if (num_pressed) - mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL); - - out: - spin_unlock_irqrestore(&tosakbd->lock, flags); -} - -/* - * tosa keyboard interrupt handler. - */ -static irqreturn_t tosakbd_interrupt(int irq, void *__dev) -{ - struct platform_device *dev = __dev; - struct tosakbd *tosakbd = platform_get_drvdata(dev); - - if (!timer_pending(&tosakbd->timer)) { - /** wait chattering delay **/ - udelay(20); - tosakbd_scankeyboard(dev); - } - - return IRQ_HANDLED; -} - -/* - * tosa timer checking for released keys - */ -static void tosakbd_timer_callback(unsigned long __dev) -{ - struct platform_device *dev = (struct platform_device *)__dev; - - tosakbd_scankeyboard(dev); -} - -#ifdef CONFIG_PM -static int tosakbd_suspend(struct platform_device *dev, pm_message_t state) -{ - struct tosakbd *tosakbd = platform_get_drvdata(dev); - unsigned long flags; - - spin_lock_irqsave(&tosakbd->lock, flags); - tosakbd->suspended = true; - spin_unlock_irqrestore(&tosakbd->lock, flags); - - del_timer_sync(&tosakbd->timer); - - return 0; -} - -static int tosakbd_resume(struct platform_device *dev) -{ - struct tosakbd *tosakbd = platform_get_drvdata(dev); - - tosakbd->suspended = false; - tosakbd_scankeyboard(dev); - - return 0; -} -#else -#define tosakbd_suspend NULL -#define tosakbd_resume NULL -#endif - -static int __devinit tosakbd_probe(struct platform_device *pdev) { - - int i; - struct tosakbd *tosakbd; - struct input_dev *input_dev; - int error; - - tosakbd = kzalloc(sizeof(struct tosakbd), GFP_KERNEL); - if (!tosakbd) - return -ENOMEM; - - input_dev = input_allocate_device(); - if (!input_dev) { - kfree(tosakbd); - return -ENOMEM; - } - - platform_set_drvdata(pdev, tosakbd); - - spin_lock_init(&tosakbd->lock); - - /* Init Keyboard rescan timer */ - init_timer(&tosakbd->timer); - tosakbd->timer.function = tosakbd_timer_callback; - tosakbd->timer.data = (unsigned long) pdev; - - tosakbd->input = input_dev; - - input_set_drvdata(input_dev, tosakbd); - input_dev->name = "Tosa Keyboard"; - input_dev->phys = "tosakbd/input0"; - input_dev->dev.parent = &pdev->dev; - - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x0001; - input_dev->id.product = 0x0001; - input_dev->id.version = 0x0100; - - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - input_dev->keycode = tosakbd->keycode; - input_dev->keycodesize = sizeof(tosakbd->keycode[0]); - input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode); - - memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd_keycode)); - - for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++) - __set_bit(tosakbd->keycode[i], input_dev->keybit); - __clear_bit(KEY_RESERVED, input_dev->keybit); - - /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ - for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { - int gpio = TOSA_GPIO_KEY_SENSE(i); - int irq; - error = gpio_request(gpio, "tosakbd"); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to request GPIO %d, " - " error %d\n", gpio, error); - goto fail; - } - - error = gpio_direction_input(TOSA_GPIO_KEY_SENSE(i)); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to configure input" - " direction for GPIO %d, error %d\n", - gpio, error); - gpio_free(gpio); - goto fail; - } - - irq = gpio_to_irq(gpio); - if (irq < 0) { - error = irq; - printk(KERN_ERR "gpio-keys: Unable to get irq number" - " for GPIO %d, error %d\n", - gpio, error); - gpio_free(gpio); - goto fail; - } - - error = request_irq(irq, tosakbd_interrupt, - IRQF_DISABLED | IRQF_TRIGGER_RISING, - "tosakbd", pdev); - - if (error) { - printk("tosakbd: Can't get IRQ: %d: error %d!\n", - irq, error); - gpio_free(gpio); - goto fail; - } - } - - /* Set Strobe lines as outputs - set high */ - for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) { - int gpio = TOSA_GPIO_KEY_STROBE(i); - error = gpio_request(gpio, "tosakbd"); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to request GPIO %d, " - " error %d\n", gpio, error); - goto fail2; - } - - error = gpio_direction_output(gpio, 1); - if (error < 0) { - printk(KERN_ERR "tosakbd: failed to configure input" - " direction for GPIO %d, error %d\n", - gpio, error); - gpio_free(gpio); - goto fail2; - } - - } - - error = input_register_device(input_dev); - if (error) { - printk(KERN_ERR "tosakbd: Unable to register input device, " - "error: %d\n", error); - goto fail2; - } - - printk(KERN_INFO "input: Tosa Keyboard Registered\n"); - - return 0; - -fail2: - while (--i >= 0) - gpio_free(TOSA_GPIO_KEY_STROBE(i)); - - i = TOSA_KEY_SENSE_NUM; -fail: - while (--i >= 0) { - free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), pdev); - gpio_free(TOSA_GPIO_KEY_SENSE(i)); - } - - platform_set_drvdata(pdev, NULL); - input_free_device(input_dev); - kfree(tosakbd); - - return error; -} - -static int __devexit tosakbd_remove(struct platform_device *dev) -{ - int i; - struct tosakbd *tosakbd = platform_get_drvdata(dev); - - for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) - gpio_free(TOSA_GPIO_KEY_STROBE(i)); - - for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { - free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), dev); - gpio_free(TOSA_GPIO_KEY_SENSE(i)); - } - - del_timer_sync(&tosakbd->timer); - - input_unregister_device(tosakbd->input); - - kfree(tosakbd); - - return 0; -} - -static struct platform_driver tosakbd_driver = { - .probe = tosakbd_probe, - .remove = __devexit_p(tosakbd_remove), - .suspend = tosakbd_suspend, - .resume = tosakbd_resume, - .driver = { - .name = "tosa-keyboard", - .owner = THIS_MODULE, - }, -}; - -static int __devinit tosakbd_init(void) -{ - return platform_driver_register(&tosakbd_driver); -} - -static void __exit tosakbd_exit(void) -{ - platform_driver_unregister(&tosakbd_driver); -} - -module_init(tosakbd_init); -module_exit(tosakbd_exit); - -MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>"); -MODULE_DESCRIPTION("Tosa Keyboard Driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:tosa-keyboard"); diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 8a8fa4d2d6a8..3d1ade2e5196 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -99,22 +99,6 @@ config TOUCHSCREEN_BITSY To compile this driver as a module, choose M here: the module will be called h3600_ts_input. -config TOUCHSCREEN_CORGI - tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)" - depends on PXA_SHARPSL - select CORGI_SSP_DEPRECATED - help - Say Y here to enable the driver for the touchscreen on the - Sharp SL-C7xx and SL-Cxx00 series of PDAs. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called corgi_ts. - - NOTE: this driver is deprecated, try enable SPI and generic - ADS7846-based touchscreen driver. - config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 7fef7d5cca23..41145d074dec 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o -obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c deleted file mode 100644 index 94a1919d439d..000000000000 --- a/drivers/input/touchscreen/corgi_ts.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * Touchscreen driver for Sharp SL-C7xx and SL-Cxx00 models - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - - -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/irq.h> - -#include <mach/sharpsl.h> -#include <mach/hardware.h> -#include <mach/pxa2xx-gpio.h> - - -#define PWR_MODE_ACTIVE 0 -#define PWR_MODE_SUSPEND 1 - -#define X_AXIS_MAX 3830 -#define X_AXIS_MIN 150 -#define Y_AXIS_MAX 3830 -#define Y_AXIS_MIN 190 -#define PRESSURE_MIN 0 -#define PRESSURE_MAX 15000 - -struct ts_event { - short pressure; - short x; - short y; -}; - -struct corgi_ts { - struct input_dev *input; - struct timer_list timer; - struct ts_event tc; - int pendown; - int power_mode; - int irq_gpio; - struct corgits_machinfo *machinfo; -}; - -#ifdef CONFIG_PXA25x -#define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C0, 0" : "=r"(a)) -#define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C0, 0" : "=r"(x)) -#define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C0, 0" : : "r"(x)) -#endif -#ifdef CONFIG_PXA27x -#define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C1, 0" : "=r"(a)) -#define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C1, 0" : "=r"(x)) -#define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C1, 0" : : "r"(x)) -#endif - -/* ADS7846 Touch Screen Controller bit definitions */ -#define ADSCTRL_PD0 (1u << 0) /* PD0 */ -#define ADSCTRL_PD1 (1u << 1) /* PD1 */ -#define ADSCTRL_DFR (1u << 2) /* SER/DFR */ -#define ADSCTRL_MOD (1u << 3) /* Mode */ -#define ADSCTRL_ADR_SH 4 /* Address setting */ -#define ADSCTRL_STS (1u << 7) /* Start Bit */ - -/* External Functions */ -extern unsigned int get_clk_frequency_khz(int info); - -static unsigned long calc_waittime(struct corgi_ts *corgi_ts) -{ - unsigned long hsync_invperiod = corgi_ts->machinfo->get_hsync_invperiod(); - - if (hsync_invperiod) - return get_clk_frequency_khz(0)*1000/hsync_invperiod; - else - return 0; -} - -static int sync_receive_data_send_cmd(struct corgi_ts *corgi_ts, int doRecive, int doSend, - unsigned int address, unsigned long wait_time) -{ - unsigned long timer1 = 0, timer2, pmnc = 0; - int pos = 0; - - if (wait_time && doSend) { - PMNC_GET(pmnc); - if (!(pmnc & 0x01)) - PMNC_SET(0x01); - - /* polling HSync */ - corgi_ts->machinfo->wait_hsync(); - /* get CCNT */ - CCNT(timer1); - } - - if (doRecive) - pos = corgi_ssp_ads7846_get(); - - if (doSend) { - int cmd = ADSCTRL_PD0 | ADSCTRL_PD1 | (address << ADSCTRL_ADR_SH) | ADSCTRL_STS; - /* dummy command */ - corgi_ssp_ads7846_put(cmd); - corgi_ssp_ads7846_get(); - - if (wait_time) { - /* Wait after HSync */ - CCNT(timer2); - if (timer2-timer1 > wait_time) { - /* too slow - timeout, try again */ - corgi_ts->machinfo->wait_hsync(); - /* get CCNT */ - CCNT(timer1); - /* Wait after HSync */ - CCNT(timer2); - } - while (timer2 - timer1 < wait_time) - CCNT(timer2); - } - corgi_ssp_ads7846_put(cmd); - if (wait_time && !(pmnc & 0x01)) - PMNC_SET(pmnc); - } - return pos; -} - -static int read_xydata(struct corgi_ts *corgi_ts) -{ - unsigned int x, y, z1, z2; - unsigned long flags, wait_time; - - /* critical section */ - local_irq_save(flags); - corgi_ssp_ads7846_lock(); - wait_time = calc_waittime(corgi_ts); - - /* Y-axis */ - sync_receive_data_send_cmd(corgi_ts, 0, 1, 1u, wait_time); - - /* Y-axis */ - sync_receive_data_send_cmd(corgi_ts, 1, 1, 1u, wait_time); - - /* X-axis */ - y = sync_receive_data_send_cmd(corgi_ts, 1, 1, 5u, wait_time); - - /* Z1 */ - x = sync_receive_data_send_cmd(corgi_ts, 1, 1, 3u, wait_time); - - /* Z2 */ - z1 = sync_receive_data_send_cmd(corgi_ts, 1, 1, 4u, wait_time); - z2 = sync_receive_data_send_cmd(corgi_ts, 1, 0, 4u, wait_time); - - /* Power-Down Enable */ - corgi_ssp_ads7846_put((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - corgi_ssp_ads7846_get(); - - corgi_ssp_ads7846_unlock(); - local_irq_restore(flags); - - if (x== 0 || y == 0 || z1 == 0 || (x * (z2 - z1) / z1) >= 15000) { - corgi_ts->tc.pressure = 0; - return 0; - } - - corgi_ts->tc.x = x; - corgi_ts->tc.y = y; - corgi_ts->tc.pressure = (x * (z2 - z1)) / z1; - return 1; -} - -static void new_data(struct corgi_ts *corgi_ts) -{ - struct input_dev *dev = corgi_ts->input; - - if (corgi_ts->power_mode != PWR_MODE_ACTIVE) - return; - - if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0) - return; - - input_report_abs(dev, ABS_X, corgi_ts->tc.x); - input_report_abs(dev, ABS_Y, corgi_ts->tc.y); - input_report_abs(dev, ABS_PRESSURE, corgi_ts->tc.pressure); - input_report_key(dev, BTN_TOUCH, corgi_ts->pendown); - input_sync(dev); -} - -static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer) -{ - if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) { - /* Disable Interrupt */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_NONE); - if (read_xydata(corgi_ts)) { - corgi_ts->pendown = 1; - new_data(corgi_ts); - } - mod_timer(&corgi_ts->timer, jiffies + HZ / 100); - } else { - if (corgi_ts->pendown == 1 || corgi_ts->pendown == 2) { - mod_timer(&corgi_ts->timer, jiffies + HZ / 100); - corgi_ts->pendown++; - return; - } - - if (corgi_ts->pendown) { - corgi_ts->tc.pressure = 0; - new_data(corgi_ts); - } - - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - corgi_ts->pendown = 0; - } -} - -static void corgi_ts_timer(unsigned long data) -{ - struct corgi_ts *corgits_data = (struct corgi_ts *) data; - - ts_interrupt_main(corgits_data, 1); -} - -static irqreturn_t ts_interrupt(int irq, void *dev_id) -{ - struct corgi_ts *corgits_data = dev_id; - - ts_interrupt_main(corgits_data, 0); - return IRQ_HANDLED; -} - -#ifdef CONFIG_PM -static int corgits_suspend(struct platform_device *dev, pm_message_t state) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(dev); - - if (corgi_ts->pendown) { - del_timer_sync(&corgi_ts->timer); - corgi_ts->tc.pressure = 0; - new_data(corgi_ts); - corgi_ts->pendown = 0; - } - corgi_ts->power_mode = PWR_MODE_SUSPEND; - - corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - - return 0; -} - -static int corgits_resume(struct platform_device *dev) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(dev); - - corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - corgi_ts->power_mode = PWR_MODE_ACTIVE; - - return 0; -} -#else -#define corgits_suspend NULL -#define corgits_resume NULL -#endif - -static int __devinit corgits_probe(struct platform_device *pdev) -{ - struct corgi_ts *corgi_ts; - struct input_dev *input_dev; - int err = -ENOMEM; - - corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!corgi_ts || !input_dev) - goto fail1; - - platform_set_drvdata(pdev, corgi_ts); - - corgi_ts->machinfo = pdev->dev.platform_data; - corgi_ts->irq_gpio = platform_get_irq(pdev, 0); - - if (corgi_ts->irq_gpio < 0) { - err = -ENODEV; - goto fail1; - } - - corgi_ts->input = input_dev; - - init_timer(&corgi_ts->timer); - corgi_ts->timer.data = (unsigned long) corgi_ts; - corgi_ts->timer.function = corgi_ts_timer; - - input_dev->name = "Corgi Touchscreen"; - input_dev->phys = "corgits/input0"; - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x0001; - input_dev->id.product = 0x0002; - input_dev->id.version = 0x0100; - input_dev->dev.parent = &pdev->dev; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); - input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0); - - pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN); - - /* Initiaize ADS7846 Difference Reference mode */ - corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((3u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - - if (request_irq(corgi_ts->irq_gpio, ts_interrupt, IRQF_DISABLED, "ts", corgi_ts)) { - err = -EBUSY; - goto fail1; - } - - err = input_register_device(corgi_ts->input); - if (err) - goto fail2; - - corgi_ts->power_mode = PWR_MODE_ACTIVE; - - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - - return 0; - - fail2: free_irq(corgi_ts->irq_gpio, corgi_ts); - fail1: input_free_device(input_dev); - kfree(corgi_ts); - return err; -} - -static int __devexit corgits_remove(struct platform_device *pdev) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(pdev); - - free_irq(corgi_ts->irq_gpio, corgi_ts); - del_timer_sync(&corgi_ts->timer); - corgi_ts->machinfo->put_hsync(); - input_unregister_device(corgi_ts->input); - kfree(corgi_ts); - - return 0; -} - -static struct platform_driver corgits_driver = { - .probe = corgits_probe, - .remove = __devexit_p(corgits_remove), - .suspend = corgits_suspend, - .resume = corgits_resume, - .driver = { - .name = "corgi-ts", - .owner = THIS_MODULE, - }, -}; - -static int __init corgits_init(void) -{ - return platform_driver_register(&corgits_driver); -} - -static void __exit corgits_exit(void) -{ - platform_driver_unregister(&corgits_driver); -} - -module_init(corgits_init); -module_exit(corgits_exit); - -MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>"); -MODULE_DESCRIPTION("Corgi TouchScreen Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:corgi-ts"); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 84c103a7ee13..ff115d920888 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -55,14 +55,16 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) host->cclk = host->mclk / (2 * (clk + 1)); } if (host->hw_designer == AMBA_VENDOR_ST) - clk |= MCI_FCEN; /* Bug fix in ST IP block */ + clk |= MCI_ST_FCEN; /* Bug fix in ST IP block */ clk |= MCI_CLK_ENABLE; /* This hasn't proven to be worthwhile */ /* clk |= MCI_CLK_PWRSAVE; */ } if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) - clk |= MCI_WIDE_BUS; + clk |= MCI_4BIT_BUS; + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) + clk |= MCI_ST_8BIT_BUS; writel(clk, host->base + MMCICLOCK); } @@ -629,7 +631,18 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) mmc->ops = &mmci_ops; mmc->f_min = (host->mclk + 511) / 512; - mmc->f_max = min(host->mclk, fmax); + /* + * If the platform data supplies a maximum operating + * frequency, this takes precedence. Else, we fall back + * to using the module parameter, which has a (low) + * default value in case it is not specified. Either + * value must not exceed the clock rate into the block, + * of course. + */ + if (plat->f_max) + mmc->f_max = min(host->mclk, plat->f_max); + else + mmc->f_max = min(host->mclk, fmax); dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max); #ifdef CONFIG_REGULATOR diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 1ceb9a90f59b..d77062e5e3af 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -25,9 +25,11 @@ #define MCI_CLK_ENABLE (1 << 8) #define MCI_CLK_PWRSAVE (1 << 9) #define MCI_CLK_BYPASS (1 << 10) -#define MCI_WIDE_BUS (1 << 11) +#define MCI_4BIT_BUS (1 << 11) +/* 8bit wide buses supported in ST Micro versions */ +#define MCI_ST_8BIT_BUS (1 << 12) /* HW flow control on the ST Micro version */ -#define MCI_FCEN (1 << 13) +#define MCI_ST_FCEN (1 << 13) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 0ed48959b590..e4f00e70a749 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -544,7 +544,7 @@ static irqreturn_t pxamci_detect_irq(int irq, void *devid) { struct pxamci_host *host = mmc_priv(devid); - mmc_detect_change(devid, host->pdata->detect_delay); + mmc_detect_change(devid, msecs_to_jiffies(host->pdata->detect_delay_ms)); return IRQ_HANDLED; } diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index d189e4743e69..a44733d44ca1 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -234,7 +234,8 @@ config PCMCIA_PXA2XX depends on ARM && ARCH_PXA && PCMCIA depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ - || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2) + || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \ + || MACH_VPAC270) select PCMCIA_SOC_COMMON help Say Y here to include support for the PXA2xx PCMCIA controller diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 381b031d9d75..4dae3613c458 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -66,6 +66,7 @@ pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o +pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y) diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c new file mode 100644 index 000000000000..55627eccee8e --- /dev/null +++ b/drivers/pcmcia/pxa2xx_vpac270.c @@ -0,0 +1,229 @@ +/* + * linux/drivers/pcmcia/pxa2xx_vpac270.c + * + * Driver for Voipac PXA270 PCMCIA and CF sockets + * + * Copyright (C) 2010 + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> + +#include <mach/gpio.h> +#include <mach/vpac270.h> + +#include "soc_common.h" + +static struct pcmcia_irqs cd_irqs[] = { + { + .sock = 0, + .irq = IRQ_GPIO(GPIO84_VPAC270_PCMCIA_CD), + .str = "PCMCIA CD" + }, + { + .sock = 1, + .irq = IRQ_GPIO(GPIO17_VPAC270_CF_CD), + .str = "CF CD" + }, +}; + +static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + if (skt->nr == 0) { + ret = gpio_request(GPIO84_VPAC270_PCMCIA_CD, "PCMCIA CD"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO84_VPAC270_PCMCIA_CD); + if (ret) + goto err2; + + ret = gpio_request(GPIO35_VPAC270_PCMCIA_RDY, "PCMCIA RDY"); + if (ret) + goto err2; + ret = gpio_direction_input(GPIO35_VPAC270_PCMCIA_RDY); + if (ret) + goto err3; + + ret = gpio_request(GPIO107_VPAC270_PCMCIA_PPEN, "PCMCIA PPEN"); + if (ret) + goto err3; + ret = gpio_direction_output(GPIO107_VPAC270_PCMCIA_PPEN, 0); + if (ret) + goto err4; + + ret = gpio_request(GPIO11_VPAC270_PCMCIA_RESET, "PCMCIA RESET"); + if (ret) + goto err4; + ret = gpio_direction_output(GPIO11_VPAC270_PCMCIA_RESET, 0); + if (ret) + goto err5; + + skt->socket.pci_irq = gpio_to_irq(GPIO35_VPAC270_PCMCIA_RDY); + + return soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1); + +err5: + gpio_free(GPIO11_VPAC270_PCMCIA_RESET); +err4: + gpio_free(GPIO107_VPAC270_PCMCIA_PPEN); +err3: + gpio_free(GPIO35_VPAC270_PCMCIA_RDY); +err2: + gpio_free(GPIO84_VPAC270_PCMCIA_CD); +err1: + return ret; + + } else { + ret = gpio_request(GPIO17_VPAC270_CF_CD, "CF CD"); + if (ret) + goto err6; + ret = gpio_direction_input(GPIO17_VPAC270_CF_CD); + if (ret) + goto err7; + + ret = gpio_request(GPIO12_VPAC270_CF_RDY, "CF RDY"); + if (ret) + goto err7; + ret = gpio_direction_input(GPIO12_VPAC270_CF_RDY); + if (ret) + goto err8; + + ret = gpio_request(GPIO16_VPAC270_CF_RESET, "CF RESET"); + if (ret) + goto err8; + ret = gpio_direction_output(GPIO16_VPAC270_CF_RESET, 0); + if (ret) + goto err9; + + skt->socket.pci_irq = gpio_to_irq(GPIO12_VPAC270_CF_RDY); + + return soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1); + +err9: + gpio_free(GPIO16_VPAC270_CF_RESET); +err8: + gpio_free(GPIO12_VPAC270_CF_RDY); +err7: + gpio_free(GPIO17_VPAC270_CF_CD); +err6: + return ret; + + } +} + +static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free(GPIO11_VPAC270_PCMCIA_RESET); + gpio_free(GPIO107_VPAC270_PCMCIA_PPEN); + gpio_free(GPIO35_VPAC270_PCMCIA_RDY); + gpio_free(GPIO84_VPAC270_PCMCIA_CD); + gpio_free(GPIO16_VPAC270_CF_RESET); + gpio_free(GPIO12_VPAC270_CF_RDY); + gpio_free(GPIO17_VPAC270_CF_CD); +} + +static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + if (skt->nr == 0) { + state->detect = !gpio_get_value(GPIO84_VPAC270_PCMCIA_CD); + state->ready = !!gpio_get_value(GPIO35_VPAC270_PCMCIA_RDY); + } else { + state->detect = !gpio_get_value(GPIO17_VPAC270_CF_CD); + state->ready = !!gpio_get_value(GPIO12_VPAC270_CF_RDY); + } + state->bvd1 = 1; + state->bvd2 = 1; + state->wrprot = 0; + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int +vpac270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + if (skt->nr == 0) { + gpio_set_value(GPIO11_VPAC270_PCMCIA_RESET, + (state->flags & SS_RESET)); + gpio_set_value(GPIO107_VPAC270_PCMCIA_PPEN, + !(state->Vcc == 33 || state->Vcc == 50)); + } else { + gpio_set_value(GPIO16_VPAC270_CF_RESET, + (state->flags & SS_RESET)); + } + + return 0; +} + +static void vpac270_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ +} + +static void vpac270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ +} + +static struct pcmcia_low_level vpac270_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 0, + .nr = 2, + + .hw_init = vpac270_pcmcia_hw_init, + .hw_shutdown = vpac270_pcmcia_hw_shutdown, + + .socket_state = vpac270_pcmcia_socket_state, + .configure_socket = vpac270_pcmcia_configure_socket, + + .socket_init = vpac270_pcmcia_socket_init, + .socket_suspend = vpac270_pcmcia_socket_suspend, +}; + +static struct platform_device *vpac270_pcmcia_device; + +static int __init vpac270_pcmcia_init(void) +{ + int ret; + + if (!machine_is_vpac270()) + return -ENODEV; + + vpac270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!vpac270_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(vpac270_pcmcia_device, + &vpac270_pcmcia_ops, sizeof(vpac270_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(vpac270_pcmcia_device); + + if (ret) + platform_device_put(vpac270_pcmcia_device); + + return ret; +} + +static void __exit vpac270_pcmcia_exit(void) +{ + platform_device_unregister(vpac270_pcmcia_device); +} + +module_init(vpac270_pcmcia_init); +module_exit(vpac270_pcmcia_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PCMCIA support for Voipac PXA270"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index f55c49475a8c..5f3f03df92e3 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -518,12 +518,13 @@ config SERIAL_S3C2412 Serial port support for the Samsung S3C2412 and S3C2413 SoC config SERIAL_S3C2440 - tristate "Samsung S3C2440/S3C2442 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442) + tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) default y if CPU_S3C2440 default y if CPU_S3C2442 + select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 help - Serial port support for the Samsung S3C2440 and S3C2442 SoC + Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC config SERIAL_S3C24A0 tristate "Samsung S3C24A0 Serial port support" diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 2c9bf9b68327..eed3c2d8dd1c 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -38,6 +38,7 @@ #include <linux/dma-mapping.h> #include <linux/atmel_pdc.h> #include <linux/atmel_serial.h> +#include <linux/uaccess.h> #include <asm/io.h> @@ -59,6 +60,9 @@ #include <linux/serial_core.h> +static void atmel_start_rx(struct uart_port *port); +static void atmel_stop_rx(struct uart_port *port); + #ifdef CONFIG_SERIAL_ATMEL_TTYAT /* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we @@ -93,6 +97,7 @@ #define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR) #define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR) #define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR) +#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR) /* PDC registers */ #define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR) @@ -147,6 +152,9 @@ struct atmel_uart_port { unsigned int irq_status_prev; struct circ_buf rx_ring; + + struct serial_rs485 rs485; /* rs485 settings */ + unsigned int tx_done_mask; }; static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; @@ -187,6 +195,46 @@ static bool atmel_use_dma_tx(struct uart_port *port) } #endif +/* Enable or disable the rs485 support */ +void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int mode; + + spin_lock(&port->lock); + + /* Disable interrupts */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + + mode = UART_GET_MR(port); + + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + atmel_port->rs485 = *rs485conf; + + if (rs485conf->flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + UART_PUT_TTGR(port, rs485conf->delay_rts_before_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + if (atmel_use_dma_tx(port)) + atmel_port->tx_done_mask = ATMEL_US_ENDTX | + ATMEL_US_TXBUFE; + else + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + } + UART_PUT_MR(port, mode); + + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); + + spin_unlock(&port->lock); + +} + /* * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty. */ @@ -202,6 +250,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) { unsigned int control = 0; unsigned int mode; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); #ifdef CONFIG_ARCH_AT91RM9200 if (cpu_is_at91rm9200()) { @@ -236,6 +285,17 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) mode |= ATMEL_US_CHMODE_LOC_LOOP; else mode |= ATMEL_US_CHMODE_NORMAL; + + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + } UART_PUT_MR(port, mode); } @@ -268,12 +328,17 @@ static u_int atmel_get_mctrl(struct uart_port *port) */ static void atmel_stop_tx(struct uart_port *port) { + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + if (atmel_use_dma_tx(port)) { /* disable PDC transmit */ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); - UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); - } else - UART_PUT_IDR(port, ATMEL_US_TXRDY); + } + /* Disable interrupts */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_start_rx(port); } /* @@ -281,17 +346,39 @@ static void atmel_stop_tx(struct uart_port *port) */ static void atmel_start_tx(struct uart_port *port) { + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + if (atmel_use_dma_tx(port)) { if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN) /* The transmitter is already running. Yes, we really need this.*/ return; - UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_stop_rx(port); + /* re-enable PDC transmit */ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); - } else - UART_PUT_IER(port, ATMEL_US_TXRDY); + } + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); +} + +/* + * start receiving - port is in process of being opened. + */ +static void atmel_start_rx(struct uart_port *port) +{ + UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */ + + if (atmel_use_dma_rx(port)) { + /* enable PDC controller */ + UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | + port->read_status_mask); + UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); + } else { + UART_PUT_IER(port, ATMEL_US_RXRDY); + } } /* @@ -302,9 +389,11 @@ static void atmel_stop_rx(struct uart_port *port) if (atmel_use_dma_rx(port)) { /* disable PDC receive */ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); - UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); - } else + UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | + port->read_status_mask); + } else { UART_PUT_IDR(port, ATMEL_US_RXRDY); + } } /* @@ -428,8 +517,9 @@ static void atmel_rx_chars(struct uart_port *port) static void atmel_tx_chars(struct uart_port *port) { struct circ_buf *xmit = &port->state->xmit; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) { + if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) { UART_PUT_CHAR(port, port->x_char); port->icount.tx++; port->x_char = 0; @@ -437,7 +527,7 @@ static void atmel_tx_chars(struct uart_port *port) if (uart_circ_empty(xmit) || uart_tx_stopped(port)) return; - while (UART_GET_CSR(port) & ATMEL_US_TXRDY) { + while (UART_GET_CSR(port) & atmel_port->tx_done_mask) { UART_PUT_CHAR(port, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; @@ -449,7 +539,8 @@ static void atmel_tx_chars(struct uart_port *port) uart_write_wakeup(port); if (!uart_circ_empty(xmit)) - UART_PUT_IER(port, ATMEL_US_TXRDY); + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); } /* @@ -501,18 +592,10 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_use_dma_tx(port)) { - /* PDC transmit */ - if (pending & (ATMEL_US_ENDTX | ATMEL_US_TXBUFE)) { - UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); - tasklet_schedule(&atmel_port->tasklet); - } - } else { - /* Interrupt transmit */ - if (pending & ATMEL_US_TXRDY) { - UART_PUT_IDR(port, ATMEL_US_TXRDY); - tasklet_schedule(&atmel_port->tasklet); - } + if (pending & atmel_port->tx_done_mask) { + /* Either PDC or interrupt transmission */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + tasklet_schedule(&atmel_port->tasklet); } } @@ -590,9 +673,15 @@ static void atmel_tx_dma(struct uart_port *port) UART_PUT_TPR(port, pdc->dma_addr + xmit->tail); UART_PUT_TCR(port, count); - /* re-enable PDC transmit and interrupts */ + /* re-enable PDC transmit */ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); - UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE); + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); + } else { + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + /* DMA done, stop TX, start RX for RS485 */ + atmel_start_rx(port); + } } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) @@ -1017,6 +1106,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, { unsigned long flags; unsigned int mode, imr, quot, baud; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); /* Get current mode register */ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL @@ -1115,6 +1205,17 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, /* disable receiver and transmitter */ UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS); + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + } + /* set the parity, stop bits and data size */ UART_PUT_MR(port, mode); @@ -1231,6 +1332,35 @@ static void atmel_poll_put_char(struct uart_port *port, unsigned char ch) } #endif +static int +atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) +{ + struct serial_rs485 rs485conf; + + switch (cmd) { + case TIOCSRS485: + if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg, + sizeof(rs485conf))) + return -EFAULT; + + atmel_config_rs485(port, &rs485conf); + break; + + case TIOCGRS485: + if (copy_to_user((struct serial_rs485 *) arg, + &(to_atmel_uart_port(port)->rs485), + sizeof(rs485conf))) + return -EFAULT; + break; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + + + static struct uart_ops atmel_pops = { .tx_empty = atmel_tx_empty, .set_mctrl = atmel_set_mctrl, @@ -1250,6 +1380,7 @@ static struct uart_ops atmel_pops = { .config_port = atmel_config_port, .verify_port = atmel_verify_port, .pm = atmel_serial_pm, + .ioctl = atmel_ioctl, #ifdef CONFIG_CONSOLE_POLL .poll_get_char = atmel_poll_get_char, .poll_put_char = atmel_poll_put_char, @@ -1265,13 +1396,12 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct uart_port *port = &atmel_port->uart; struct atmel_uart_data *data = pdev->dev.platform_data; - port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; - port->ops = &atmel_pops; - port->fifosize = 1; - port->line = pdev->id; - port->dev = &pdev->dev; - + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &atmel_pops; + port->fifosize = 1; + port->line = pdev->id; + port->dev = &pdev->dev; port->mapbase = pdev->resource[0].start; port->irq = pdev->resource[1].start; @@ -1299,8 +1429,16 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, atmel_port->use_dma_rx = data->use_dma_rx; atmel_port->use_dma_tx = data->use_dma_tx; - if (atmel_use_dma_tx(port)) + atmel_port->rs485 = data->rs485; + /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */ + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + else if (atmel_use_dma_tx(port)) { port->fifosize = PDC_BUFFER_SIZE; + atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE; + } else { + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + } } /* @@ -1334,6 +1472,7 @@ static void atmel_console_putchar(struct uart_port *port, int ch) static void atmel_console_write(struct console *co, const char *s, u_int count) { struct uart_port *port = &atmel_ports[co->index].uart; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); unsigned int status, imr; unsigned int pdc_tx; @@ -1341,7 +1480,7 @@ static void atmel_console_write(struct console *co, const char *s, u_int count) * First, save IMR and then disable interrupts */ imr = UART_GET_IMR(port); - UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY); + UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask); /* Store PDC transmit status and disable it */ pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN; diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 36828358a4d8..e76b1afafe07 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -36,8 +36,7 @@ #include <asm/delay.h> #include <mach/dma.h> -#include <mach/regs-ssp.h> -#include <mach/ssp.h> +#include <plat/ssp.h> #include <mach/pxa2xx_spi.h> MODULE_AUTHOR("Stephen Street"); @@ -1318,14 +1317,14 @@ static int setup(struct spi_device *spi) /* NOTE: PXA25x_SSP _could_ use external clocking ... */ if (drv_data->ssp_type != PXA25x_SSP) dev_dbg(&spi->dev, "%ld Hz actual, %s\n", - clk_get_rate(ssp->clk) - / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), - chip->enable_dma ? "DMA" : "PIO"); + clk_get_rate(ssp->clk) + / (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)), + chip->enable_dma ? "DMA" : "PIO"); else dev_dbg(&spi->dev, "%ld Hz actual, %s\n", - clk_get_rate(ssp->clk) / 2 - / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), - chip->enable_dma ? "DMA" : "PIO"); + clk_get_rate(ssp->clk) / 2 + / (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)), + chip->enable_dma ? "DMA" : "PIO"); if (spi->bits_per_word <= 8) { chip->n_bytes = 1; @@ -1466,7 +1465,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) platform_info = dev->platform_data; - ssp = ssp_request(pdev->id, pdev->name); + ssp = pxa_ssp_request(pdev->id, pdev->name); if (ssp == NULL) { dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id); return -ENODEV; @@ -1476,7 +1475,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); if (!master) { dev_err(&pdev->dev, "cannot alloc spi_master\n"); - ssp_free(ssp); + pxa_ssp_free(ssp); return -ENOMEM; } drv_data = spi_master_get_devdata(master); @@ -1558,7 +1557,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) | SSCR1_TxTresh(TX_THRESH_DFLT), drv_data->ioaddr); - write_SSCR0(SSCR0_SerClkDiv(2) + write_SSCR0(SSCR0_SCR(2) | SSCR0_Motorola | SSCR0_DataSize(8), drv_data->ioaddr); @@ -1605,7 +1604,7 @@ out_error_irq_alloc: out_error_master_alloc: spi_master_put(master); - ssp_free(ssp); + pxa_ssp_free(ssp); return status; } @@ -1649,7 +1648,7 @@ static int pxa2xx_spi_remove(struct platform_device *pdev) free_irq(ssp->irq, drv_data); /* Release SSP */ - ssp_free(ssp); + pxa_ssp_free(ssp); /* Disconnect from the SPI framework */ spi_unregister_master(drv_data->master); diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index df1bae9b048e..eaa79c8a9b8c 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -366,6 +366,13 @@ rescan: if (is_done) done(ep, req, 0); else if (ep->is_pingpong) { + /* + * One dummy read to delay the code because of a HW glitch: + * CSR returns bad RXCOUNT when read too soon after updating + * RX_DATA_BK flags. + */ + csr = __raw_readl(creg); + bufferspace -= count; buf += count; goto rescan; diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index 6b4241748dda..7e466fe72025 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -6,8 +6,29 @@ #include <linux/mmc/host.h> +/** + * struct mmci_platform_data - platform configuration for the MMCI + * (also known as PL180) block. + * @f_max: the maximum operational frequency for this host in this + * platform configuration. When this is specified it takes precedence + * over the module parameter for the same frequency. + * @ocr_mask: available voltages on the 4 pins from the block, this + * is ignored if a regulator is used, see the MMC_VDD_* masks in + * mmc/host.h + * @translate_vdd: a callback function to translate a MMC_VDD_* + * mask into a value to be binary or:ed and written into the + * MMCIPWR register of the block + * @status: if no GPIO read function was given to the block in + * gpio_wp (below) this function will be called to determine + * whether a card is present in the MMC slot or not + * @gpio_wp: read this GPIO pin to see if the card is write protected + * @gpio_cd: read this GPIO pin to detect card insertion + * @capabilities: the capabilities of the block as implemented in + * this platform, signify anything MMC_CAP_* from mmc/host.h + */ struct mmci_platform_data { - unsigned int ocr_mask; /* available voltages */ + unsigned int f_max; + unsigned int ocr_mask; u32 (*translate_vdd)(struct device *, unsigned int); unsigned int (*status)(struct device *); int gpio_wp; diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 376e14a9c273..78e612100782 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -23,6 +23,7 @@ config SND_PXA2XX_SOC_I2S config SND_PXA_SOC_SSP tristate + select PXA_SSP config SND_PXA2XX_SOC_CORGI tristate "SoC Audio support for Sharp Zaurus SL-C7x0" diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 544fd9566f4d..a1fd23e0e3d0 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -32,9 +32,8 @@ #include <mach/hardware.h> #include <mach/dma.h> -#include <mach/regs-ssp.h> #include <mach/audio.h> -#include <mach/ssp.h> +#include <plat/ssp.h> #include "pxa2xx-pcm.h" #include "pxa-ssp.h" @@ -57,15 +56,15 @@ struct ssp_priv { static void dump_registers(struct ssp_device *ssp) { dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n", - ssp_read_reg(ssp, SSCR0), ssp_read_reg(ssp, SSCR1), - ssp_read_reg(ssp, SSTO)); + pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1), + pxa_ssp_read_reg(ssp, SSTO)); dev_dbg(&ssp->pdev->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n", - ssp_read_reg(ssp, SSPSP), ssp_read_reg(ssp, SSSR), - ssp_read_reg(ssp, SSACD)); + pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR), + pxa_ssp_read_reg(ssp, SSACD)); } -static void ssp_enable(struct ssp_device *ssp) +static void pxa_ssp_enable(struct ssp_device *ssp) { uint32_t sscr0; @@ -73,7 +72,7 @@ static void ssp_enable(struct ssp_device *ssp) __raw_writel(sscr0, ssp->mmio_base + SSCR0); } -static void ssp_disable(struct ssp_device *ssp) +static void pxa_ssp_disable(struct ssp_device *ssp) { uint32_t sscr0; @@ -87,7 +86,7 @@ struct pxa2xx_pcm_dma_data { }; static struct pxa2xx_pcm_dma_params * -ssp_get_dma_params(struct ssp_device *ssp, int width4, int out) +pxa_ssp_get_dma_params(struct ssp_device *ssp, int width4, int out) { struct pxa2xx_pcm_dma_data *dma; @@ -119,7 +118,7 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream, if (!cpu_dai->active) { clk_enable(ssp->clk); - ssp_disable(ssp); + pxa_ssp_disable(ssp); } kfree(snd_soc_dai_get_dma_data(cpu_dai, substream)); @@ -137,7 +136,7 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, struct ssp_device *ssp = priv->ssp; if (!cpu_dai->active) { - ssp_disable(ssp); + pxa_ssp_disable(ssp); clk_disable(ssp->clk); } @@ -160,7 +159,7 @@ static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai) priv->to = __raw_readl(ssp->mmio_base + SSTO); priv->psp = __raw_readl(ssp->mmio_base + SSPSP); - ssp_disable(ssp); + pxa_ssp_disable(ssp); clk_disable(ssp->clk); return 0; } @@ -180,7 +179,7 @@ static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai) __raw_writel(priv->psp, ssp->mmio_base + SSPSP); if (cpu_dai->active) - ssp_enable(ssp); + pxa_ssp_enable(ssp); else clk_disable(ssp->clk); @@ -196,9 +195,9 @@ static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai) * ssp_set_clkdiv - set SSP clock divider * @div: serial clock rate divider */ -static void ssp_set_scr(struct ssp_device *ssp, u32 div) +static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div) { - u32 sscr0 = ssp_read_reg(ssp, SSCR0); + u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) { sscr0 &= ~0x0000ff00; @@ -207,15 +206,15 @@ static void ssp_set_scr(struct ssp_device *ssp, u32 div) sscr0 &= ~0x000fff00; sscr0 |= (div - 1) << 8; /* 1..4096 */ } - ssp_write_reg(ssp, SSCR0, sscr0); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); } /** - * ssp_get_clkdiv - get SSP clock divider + * pxa_ssp_get_clkdiv - get SSP clock divider */ -static u32 ssp_get_scr(struct ssp_device *ssp) +static u32 pxa_ssp_get_scr(struct ssp_device *ssp) { - u32 sscr0 = ssp_read_reg(ssp, SSCR0); + u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); u32 div; if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) @@ -235,7 +234,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, struct ssp_device *ssp = priv->ssp; int val; - u32 sscr0 = ssp_read_reg(ssp, SSCR0) & + u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); dev_dbg(&ssp->pdev->dev, @@ -263,7 +262,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, break; case PXA_SSP_CLK_AUDIO: priv->sysclk = 0; - ssp_set_scr(ssp, 1); + pxa_ssp_set_scr(ssp, 1); sscr0 |= SSCR0_ACS; break; default: @@ -274,8 +273,8 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, * on PXA2xx. On PXA3xx it must be enabled when doing so. */ if (!cpu_is_pxa3xx()) clk_disable(ssp->clk); - val = ssp_read_reg(ssp, SSCR0) | sscr0; - ssp_write_reg(ssp, SSCR0, val); + val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0; + pxa_ssp_write_reg(ssp, SSCR0, val); if (!cpu_is_pxa3xx()) clk_enable(ssp->clk); @@ -294,11 +293,11 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, switch (div_id) { case PXA_SSP_AUDIO_DIV_ACDS: - val = (ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div); - ssp_write_reg(ssp, SSACD, val); + val = (pxa_ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div); + pxa_ssp_write_reg(ssp, SSACD, val); break; case PXA_SSP_AUDIO_DIV_SCDB: - val = ssp_read_reg(ssp, SSACD); + val = pxa_ssp_read_reg(ssp, SSACD); val &= ~SSACD_SCDB; #if defined(CONFIG_PXA3xx) if (cpu_is_pxa3xx()) @@ -321,10 +320,10 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, default: return -EINVAL; } - ssp_write_reg(ssp, SSACD, val); + pxa_ssp_write_reg(ssp, SSACD, val); break; case PXA_SSP_DIV_SCR: - ssp_set_scr(ssp, div); + pxa_ssp_set_scr(ssp, div); break; default: return -ENODEV; @@ -341,11 +340,11 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, { struct ssp_priv *priv = cpu_dai->private_data; struct ssp_device *ssp = priv->ssp; - u32 ssacd = ssp_read_reg(ssp, SSACD) & ~0x70; + u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70; #if defined(CONFIG_PXA3xx) if (cpu_is_pxa3xx()) - ssp_write_reg(ssp, SSACDD, 0); + pxa_ssp_write_reg(ssp, SSACDD, 0); #endif switch (freq_out) { @@ -383,7 +382,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, val = tmp; val = (val << 16) | 64; - ssp_write_reg(ssp, SSACDD, val); + pxa_ssp_write_reg(ssp, SSACDD, val); ssacd |= (0x6 << 4); @@ -397,7 +396,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, return -EINVAL; } - ssp_write_reg(ssp, SSACD, ssacd); + pxa_ssp_write_reg(ssp, SSACD, ssacd); return 0; } @@ -412,7 +411,7 @@ static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, struct ssp_device *ssp = priv->ssp; u32 sscr0; - sscr0 = ssp_read_reg(ssp, SSCR0); + sscr0 = pxa_ssp_read_reg(ssp, SSCR0); sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS); /* set slot width */ @@ -429,10 +428,10 @@ static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, sscr0 |= SSCR0_SlotsPerFrm(slots); /* set active slot mask */ - ssp_write_reg(ssp, SSTSA, tx_mask); - ssp_write_reg(ssp, SSRSA, rx_mask); + pxa_ssp_write_reg(ssp, SSTSA, tx_mask); + pxa_ssp_write_reg(ssp, SSRSA, rx_mask); } - ssp_write_reg(ssp, SSCR0, sscr0); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); return 0; } @@ -447,12 +446,12 @@ static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai, struct ssp_device *ssp = priv->ssp; u32 sscr1; - sscr1 = ssp_read_reg(ssp, SSCR1); + sscr1 = pxa_ssp_read_reg(ssp, SSCR1); if (tristate) sscr1 &= ~SSCR1_TTE; else sscr1 |= SSCR1_TTE; - ssp_write_reg(ssp, SSCR1, sscr1); + pxa_ssp_write_reg(ssp, SSCR1, sscr1); return 0; } @@ -476,14 +475,14 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, return 0; /* we can only change the settings if the port is not in use */ - if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { + if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) { dev_err(&ssp->pdev->dev, "can't change hardware dai format: stream is in use"); return -EINVAL; } /* reset port settings */ - sscr0 = ssp_read_reg(ssp, SSCR0) & + sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & (SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7); sspsp = 0; @@ -535,9 +534,9 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, return -EINVAL; } - ssp_write_reg(ssp, SSCR0, sscr0); - ssp_write_reg(ssp, SSCR1, sscr1); - ssp_write_reg(ssp, SSPSP, sspsp); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); + pxa_ssp_write_reg(ssp, SSCR1, sscr1); + pxa_ssp_write_reg(ssp, SSPSP, sspsp); dump_registers(ssp); @@ -566,7 +565,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, u32 sscr0; u32 sspsp; int width = snd_pcm_format_physical_width(params_format(params)); - int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf; + int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf; struct pxa2xx_pcm_dma_params *dma_data; dma_data = snd_soc_dai_get_dma_data(dai, substream); @@ -578,22 +577,22 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, * to force 16-bit frame width on the wire (for S16_LE), even * with two channels. Use 16-bit DMA transfers for this case. */ - dma_data = ssp_get_dma_params(ssp, + dma_data = pxa_ssp_get_dma_params(ssp, ((chn == 2) && (ttsa != 1)) || (width == 32), substream->stream == SNDRV_PCM_STREAM_PLAYBACK); snd_soc_dai_set_dma_data(dai, substream, dma_data); /* we can only change the settings if the port is not in use */ - if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) + if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) return 0; /* clear selected SSP bits */ - sscr0 = ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS); - ssp_write_reg(ssp, SSCR0, sscr0); + sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* bit size */ - sscr0 = ssp_read_reg(ssp, SSCR0); + sscr0 = pxa_ssp_read_reg(ssp, SSCR0); switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: #ifdef CONFIG_PXA3xx @@ -609,13 +608,13 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16)); break; } - ssp_write_reg(ssp, SSCR0, sscr0); + pxa_ssp_write_reg(ssp, SSCR0, sscr0); switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: - sspsp = ssp_read_reg(ssp, SSPSP); + sspsp = pxa_ssp_read_reg(ssp, SSPSP); - if ((ssp_get_scr(ssp) == 4) && (width == 16)) { + if ((pxa_ssp_get_scr(ssp) == 4) && (width == 16)) { /* This is a special case where the bitclk is 64fs * and we're not dealing with 2*32 bits of audio * samples. @@ -649,7 +648,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, sspsp |= SSPSP_DMYSTRT(1); } - ssp_write_reg(ssp, SSPSP, sspsp); + pxa_ssp_write_reg(ssp, SSPSP, sspsp); break; default: break; @@ -680,45 +679,45 @@ static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd, switch (cmd) { case SNDRV_PCM_TRIGGER_RESUME: - ssp_enable(ssp); + pxa_ssp_enable(ssp); break; case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - val = ssp_read_reg(ssp, SSCR1); + val = pxa_ssp_read_reg(ssp, SSCR1); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) val |= SSCR1_TSRE; else val |= SSCR1_RSRE; - ssp_write_reg(ssp, SSCR1, val); - val = ssp_read_reg(ssp, SSSR); - ssp_write_reg(ssp, SSSR, val); + pxa_ssp_write_reg(ssp, SSCR1, val); + val = pxa_ssp_read_reg(ssp, SSSR); + pxa_ssp_write_reg(ssp, SSSR, val); break; case SNDRV_PCM_TRIGGER_START: - val = ssp_read_reg(ssp, SSCR1); + val = pxa_ssp_read_reg(ssp, SSCR1); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) val |= SSCR1_TSRE; else val |= SSCR1_RSRE; - ssp_write_reg(ssp, SSCR1, val); - ssp_enable(ssp); + pxa_ssp_write_reg(ssp, SSCR1, val); + pxa_ssp_enable(ssp); break; case SNDRV_PCM_TRIGGER_STOP: - val = ssp_read_reg(ssp, SSCR1); + val = pxa_ssp_read_reg(ssp, SSCR1); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) val &= ~SSCR1_TSRE; else val &= ~SSCR1_RSRE; - ssp_write_reg(ssp, SSCR1, val); + pxa_ssp_write_reg(ssp, SSCR1, val); break; case SNDRV_PCM_TRIGGER_SUSPEND: - ssp_disable(ssp); + pxa_ssp_disable(ssp); break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - val = ssp_read_reg(ssp, SSCR1); + val = pxa_ssp_read_reg(ssp, SSCR1); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) val &= ~SSCR1_TSRE; else val &= ~SSCR1_RSRE; - ssp_write_reg(ssp, SSCR1, val); + pxa_ssp_write_reg(ssp, SSCR1, val); break; default: @@ -740,7 +739,7 @@ static int pxa_ssp_probe(struct platform_device *pdev, if (!priv) return -ENOMEM; - priv->ssp = ssp_request(dai->id + 1, "SoC audio"); + priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio"); if (priv->ssp == NULL) { ret = -ENODEV; goto err_priv; @@ -760,7 +759,7 @@ static void pxa_ssp_remove(struct platform_device *pdev, struct snd_soc_dai *dai) { struct ssp_priv *priv = dai->private_data; - ssp_free(priv->ssp); + pxa_ssp_free(priv->ssp); } #define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ |