diff options
| -rw-r--r-- | arch/arm/boot/dts/ti/omap/dra7.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/id.c | 5 | ||||
| -rw-r--r-- | drivers/bus/ti-sysc.c | 18 |
3 files changed, 20 insertions, 5 deletions
diff --git a/arch/arm/boot/dts/ti/omap/dra7.dtsi b/arch/arm/boot/dts/ti/omap/dra7.dtsi index 3f3e52e3b375..6509c742fb58 100644 --- a/arch/arm/boot/dts/ti/omap/dra7.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7.dtsi @@ -147,7 +147,7 @@ l3-noc@44000000 { compatible = "ti,dra7-l3-noc"; - reg = <0x44000000 0x1000>, + reg = <0x44000000 0x1000000>, <0x45000000 0x1000>; interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 98999aa8cc0c..7f387706368a 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -793,11 +793,16 @@ void __init omap_soc_device_init(void) soc_dev_attr->machine = soc_name; soc_dev_attr->family = omap_get_family(); + if (!soc_dev_attr->family) { + kfree(soc_dev_attr); + return; + } soc_dev_attr->revision = soc_rev; soc_dev_attr->custom_attr_group = omap_soc_groups[0]; soc_dev = soc_device_register(soc_dev_attr); if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); kfree(soc_dev_attr); return; } diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index d57bc066dce6..9ed9239b1228 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -2158,13 +2158,23 @@ static int sysc_reset(struct sysc *ddata) sysc_val = sysc_read_sysconfig(ddata); sysc_val |= sysc_mask; sysc_write(ddata, sysc_offset, sysc_val); - /* Flush posted write */ + + /* + * Some devices need a delay before reading registers + * after reset. Presumably a srst_udelay is not needed + * for devices that use a rstctrl register reset. + */ + if (ddata->cfg.srst_udelay) + fsleep(ddata->cfg.srst_udelay); + + /* + * Flush posted write. For devices needing srst_udelay + * this should trigger an interconnect error if the + * srst_udelay value is needed but not configured. + */ sysc_val = sysc_read_sysconfig(ddata); } - if (ddata->cfg.srst_udelay) - fsleep(ddata->cfg.srst_udelay); - if (ddata->post_reset_quirk) ddata->post_reset_quirk(ddata); |