diff options
61 files changed, 2655 insertions, 3223 deletions
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt new file mode 100644 index 000000000000..0b64ad8dadf6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt @@ -0,0 +1,50 @@ +* Samsung S3C2410 Clock Controller + +The S3C2410 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to the s3c2410, +s3c2440 and s3c2442 SoCs in the s3c24x family. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC. + - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC. + - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC. +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/samsung,s3c2410-clock.h header and can be used in device +tree sources. + +External clocks: + +The xti clock used as input for the plls is generated outside the SoC. It is +expected that is are defined using standard clock bindings with a +clock-output-names value of "xti". + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2410-clock"; + reg = <0x4c000000 0x20>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt new file mode 100644 index 000000000000..2b430960ba47 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt @@ -0,0 +1,50 @@ +* Samsung S3C2412 Clock Controller + +The S3C2412 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to the s3c2412 +and s3c2413 SoCs in the s3c24x family. + +Required Properties: + +- compatible: should be "samsung,s3c2412-clock" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s3c2412.h header and can be used in device +tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xti" - crystal input - required, + - "ext" - external clock source - optional, + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2412-clock"; + reg = <0x4c000000 0x20>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2412-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt new file mode 100644 index 000000000000..e67bb05478af --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt @@ -0,0 +1,56 @@ +* Samsung S3C2443 Clock Controller + +The S3C2443 clock controller generates and supplies clock to various controllers +within the SoC. The clock binding described here is applicable to all SoCs in +the s3c24x family starting with the s3c2443. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC. + - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC. + - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC. +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Some of the clocks are available only +on a particular SoC. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s3c2443.h header and can be used in device +tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xti" - crystal input - required, + - "ext" - external clock source - optional, + - "ext_i2s" - external I2S clock - optional, + - "ext_uart" - external uart clock - optional, + +Example: Clock controller node: + + clocks: clock-controller@4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + serial@50004000 { + compatible = "samsung,s3c2440-uart"; + reg = <0x50004000 0x4000>; + interrupts = <1 23 3 4>, <1 23 4 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; + status = "disabled"; + }; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 59594cf15998..ea92fd69529a 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -19,6 +19,19 @@ reg = <0x30000000 0x4000000>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + xti: xti { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "xti"; + #clock-cells = <0>; + }; + }; + serial@50000000 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index e6555bdd81b8..955e4a4f8c31 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/s3c2443.h> #include "s3c24xx.dtsi" #include "s3c2416-pinctrl.dtsi" @@ -28,26 +29,53 @@ compatible = "samsung,s3c2416-irq"; }; + clocks: clock-controller@0x4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + pinctrl@56000000 { compatible = "samsung,s3c2416-pinctrl"; }; + timer@51000000 { + clocks = <&clocks PCLK_PWM>; + clock-names = "timers"; + }; + serial@50000000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; }; serial@50004000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; }; serial@50008000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; }; serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>, + <&clocks SCLK_UART>; status = "disabled"; }; @@ -55,6 +83,10 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>, + <&clocks MUX_HSMMC0>; status = "disabled"; }; @@ -62,18 +94,28 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>, + <&clocks MUX_HSMMC1>; status = "disabled"; }; watchdog@53000000 { interrupts = <1 9 27 3>; + clocks = <&clocks PCLK_WDT>; + clock-names = "watchdog"; }; rtc@57000000 { compatible = "samsung,s3c2416-rtc"; + clocks = <&clocks PCLK_RTC>; + clock-names = "rtc"; }; i2c@54000000 { compatible = "samsung,s3c2440-i2c"; + clocks = <&clocks PCLK_I2C0>; + clock-names = "i2c"; }; }; diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 40cf50b9940c..22d149bcfcc6 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -18,6 +18,18 @@ config PLAT_S3C24XX help Base platform code for any Samsung S3C24XX device +config S3C2410_COMMON_CLK + bool + help + Build the s3c2410 clock driver based on the common clock framework. + +config S3C2410_COMMON_DCLK + bool + select REGMAP_MMIO + help + Temporary symbol to build the dclk driver based on the common clock + framework. + menu "SAMSUNG S3C24XX SoCs Support" comment "S3C24XX SoCs" @@ -25,9 +37,10 @@ comment "S3C24XX SoCs" config CPU_S3C2410 bool "SAMSUNG S3C2410" default y + select COMMON_CLK select CPU_ARM920T select CPU_LLSERIAL_S3C2410 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM @@ -38,8 +51,10 @@ config CPU_S3C2410 config CPU_S3C2412 bool "SAMSUNG S3C2412" + select COMMON_CLK select CPU_ARM926T select CPU_LLSERIAL_S3C2440 + select S3C2412_COMMON_CLK select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM help @@ -47,20 +62,21 @@ config CPU_S3C2412 config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" + select COMMON_CLK select CPU_ARM926T select CPU_LLSERIAL_S3C2440 select S3C2416_PM if PM - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2416 SoC from the S3C24XX line config CPU_S3C2440 bool "SAMSUNG S3C2440" + select COMMON_CLK select CPU_ARM920T select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA help @@ -68,9 +84,10 @@ config CPU_S3C2440 config CPU_S3C2442 bool "SAMSUNG S3C2442" + select COMMON_CLK select CPU_ARM920T select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM help @@ -83,27 +100,16 @@ config CPU_S3C244X config CPU_S3C2443 bool "SAMSUNG S3C2443" + select COMMON_CLK select CPU_ARM920T select CPU_LLSERIAL_S3C2440 - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2443 SoC from the S3C24XX line # common code -config S3C2410_CLOCK - bool - help - Clock code for the S3C2410, and similar processors which - is currently includes the S3C2410, S3C2440, S3C2442. - -config S3C24XX_DCLK - bool - help - Clock code for supporting DCLK/CLKOUT on S3C24XX architectures - config S3C24XX_SMDK bool help @@ -258,8 +264,8 @@ config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ - select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -340,7 +346,7 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" select MACH_BAST_IDE - select S3C24XX_DCLK + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -359,6 +365,11 @@ config S3C2412_PM_SLEEP if CPU_S3C2412 +config S3C2412_COMMON_CLK + bool + help + Build the s3c2412 clock driver based on the common clock framework. + config CPU_S3C2412_ONLY bool depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ @@ -519,8 +530,8 @@ comment "S3C2440 Boards" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select HAVE_PATA_PLATFORM + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help @@ -558,9 +569,9 @@ config MACH_NEXCODER_2440 config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND select S3C_DEV_USB_HOST @@ -629,9 +640,9 @@ config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 - select S3C24XX_DCLK select S3C24XX_PWM select S3C_DEV_NAND help @@ -641,11 +652,11 @@ endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 -config S3C2443_COMMON +config S3C2443_COMMON_CLK bool help - Common code for the S3C2443 and similar processors, which includes - the S3C2416 and S3C2450. + Temporary symbol to build the clock driver based on the common clock + framework. config S3C2443_DMA bool diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 7f54e5b954ca..2235d0d3b38d 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -21,22 +21,22 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o -obj-$(CONFIG_CPU_S3C2443) += s3c2443.o clock-s3c2443.o +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o # PM @@ -44,16 +44,13 @@ obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o # common code -obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_S3C24XX_DMA) += dma.o -obj-$(CONFIG_S3C2410_CLOCK) += clock-s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o -obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o # diff --git a/arch/arm/mach-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c deleted file mode 100644 index 1edd9b2369c5..000000000000 --- a/arch/arm/mach-s3c24xx/clock-dclk.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (c) 2004-2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24XX - definitions for DCLK and CLKOUT registers - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* clocks that could be registered by external code */ - -static int s3c24xx_dclk_enable(struct clk *clk, int enable) -{ - unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (enable) - dclkcon |= clk->ctrlbit; - else - dclkcon &= ~clk->ctrlbit; - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} - -static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long dclkcon; - unsigned int uclk; - - if (parent == &clk_upll) - uclk = 1; - else if (parent == &clk_p) - uclk = 0; - else - return -EINVAL; - - clk->parent = parent; - - dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; - } else { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; - } - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} -static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate) -{ - unsigned long div; - - if ((rate == 0) || !clk->parent) - return 0; - - div = clk_get_rate(clk->parent) / rate; - if (div < 2) - div = 2; - else if (div > 16) - div = 16; - - return div; -} - -static unsigned long s3c24xx_round_dclk_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return 0; - - return clk_get_rate(clk->parent) / div; -} - -static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate) -{ - unsigned long mask, data, div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return -EINVAL; - - if (clk == &s3c24xx_dclk0) { - mask = S3C2410_DCLKCON_DCLK0_DIV_MASK | - S3C2410_DCLKCON_DCLK0_CMP_MASK; - data = S3C2410_DCLKCON_DCLK0_DIV(div) | - S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2); - } else if (clk == &s3c24xx_dclk1) { - mask = S3C2410_DCLKCON_DCLK1_DIV_MASK | - S3C2410_DCLKCON_DCLK1_CMP_MASK; - data = S3C2410_DCLKCON_DCLK1_DIV(div) | - S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2); - } else - return -EINVAL; - - clk->rate = clk_get_rate(clk->parent) / div; - __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data), - S3C24XX_DCLKCON); - return clk->rate; -} -static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long mask; - unsigned long source; - - /* calculate the MISCCR setting for the clock */ - - if (parent == &clk_mpll) - source = S3C2410_MISCCR_CLK0_MPLL; - else if (parent == &clk_upll) - source = S3C2410_MISCCR_CLK0_UPLL; - else if (parent == &clk_f) - source = S3C2410_MISCCR_CLK0_FCLK; - else if (parent == &clk_h) - source = S3C2410_MISCCR_CLK0_HCLK; - else if (parent == &clk_p) - source = S3C2410_MISCCR_CLK0_PCLK; - else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) - source = S3C2410_MISCCR_CLK0_DCLK0; - else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) - source = S3C2410_MISCCR_CLK0_DCLK0; - else - return -EINVAL; - - clk->parent = parent; - - if (clk == &s3c24xx_clkout0) - mask = S3C2410_MISCCR_CLK0_MASK; - else { - source <<= 4; - mask = S3C2410_MISCCR_CLK1_MASK; - } - - s3c2410_modify_misccr(mask, source); - return 0; -} - -/* external clock definitions */ - -static struct clk_ops dclk_ops = { - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, -}; - -struct clk s3c24xx_dclk0 = { - .name = "dclk0", - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -struct clk s3c24xx_dclk1 = { - .name = "dclk1", - .ctrlbit = S3C2410_DCLKCON_DCLK1EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -static struct clk_ops clkout_ops = { - .set_parent = s3c24xx_clkout_setparent, -}; - -struct clk s3c24xx_clkout0 = { - .name = "clkout0", - .ops = &clkout_ops, -}; - -struct clk s3c24xx_clkout1 = { - .name = "clkout1", - .ops = &clkout_ops, -}; diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c deleted file mode 100644 index d1afcf9252d1..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410,S3C2440,S3C2442 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -int s3c2410_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - /* ensure none of the special function bits set */ - clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2410_upll_enable(struct clk *clk, int enable) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long orig = clkslow; - - if (enable) - clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; - else - clkslow |= S3C2410_CLKSLOW_UCLK_OFF; - - __raw_writel(clkslow, S3C2410_CLKSLOW); - - /* if we started the UPLL, then allow to settle */ - - if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) - udelay(200); - - return 0; -} - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SPI, - } -}; - -static struct clk clk_lcd = { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC, -}; - -static struct clk clk_gpio = { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO, -}; - -static struct clk clk_usb_host = { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH, -}; - -static struct clk clk_usb_device = { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD, -}; - -static struct clk clk_timers = { - .name = "timers", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT, -}; - -struct clk s3c24xx_clk_uart0 = { - .name = "uart", - .devname = "s3c2410-uart.0", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0, -}; - -struct clk s3c24xx_clk_uart1 = { - .name = "uart", - .devname = "s3c2410-uart.1", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1, -}; - -struct clk s3c24xx_clk_uart2 = { - .name = "uart", - .devname = "s3c2410-uart.2", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2, -}; - -static struct clk clk_rtc = { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC, -}; - -static struct clk clk_watchdog = { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, -}; - -static struct clk clk_usb_bus_host = { - .name = "usb-bus-host", - .parent = &clk_usb_bus, -}; - -static struct clk clk_usb_bus_gadget = { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, -}; - -static struct clk *init_clocks[] = { - &clk_lcd, - &clk_gpio, - &clk_usb_host, - &clk_usb_device, - &clk_timers, - &s3c24xx_clk_uart0, - &s3c24xx_clk_uart1, - &s3c24xx_clk_uart2, - &clk_rtc, - &clk_watchdog, - &clk_usb_bus_host, - &clk_usb_bus_gadget, -}; - -/* s3c2410_baseclk_add() - * - * Add all the clocks used by the s3c2410 or compatible CPUs - * such as the S3C2440 and S3C2442. - * - * We cannot use a system device as we are needed before any - * of the init-calls that initialise the devices are actually - * done. -*/ - -int __init s3c2410_baseclk_add(void) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - struct clk *xtal; - int ret; - int ptr; - - clk_upll.enable = s3c2410_upll_enable; - - if (s3c24xx_register_clock(&clk_usb_bus) < 0) - printk(KERN_ERR "failed to register usb bus clock\n"); - - /* register clocks from clock array */ - - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) { - struct clk *clkp = init_clocks[ptr]; - - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - /* show the clock-slow value */ - - xtal = clk_get(NULL, "xtal"); - - printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", - print_mhz(clk_get_rate(xtal) / - ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), - (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", - (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", - (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); - - return 0; -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c deleted file mode 100644 index 192a5b2550b0..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ /dev/null @@ -1,760 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/clock.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412,S3C2413 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -static int s3c2412_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2412_upll_enable(struct clk *clk, int enable) -{ - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); - unsigned long orig = upllcon; - - if (!enable) - upllcon |= S3C2412_PLLCON_OFF; - else - upllcon &= ~S3C2412_PLLCON_OFF; - - __raw_writel(upllcon, S3C2410_UPLLCON); - - /* allow ~150uS for the PLL to settle and lock */ - - if (enable && (orig & S3C2412_PLLCON_OFF)) - udelay(150); - - return 0; -} - -/* clock selections */ - -static struct clk clk_erefclk = { - .name = "erefclk", -}; - -static struct clk clk_urefclk = { - .name = "urefclk", -}; - -static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_urefclk) - clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL; - else if (parent == &clk_upll) - clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_usysclk = { - .name = "usysclk", - .parent = &clk_xtal, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_usysclk, - }, -}; - -static struct clk clk_mrefclk = { - .name = "mrefclk", - .parent = &clk_xtal, -}; - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_xtal, -}; - -static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_USBCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - if (div > 2) - div = 2; - - return parent_rate / div; -} - -static unsigned long s3c2412_getrate_usbsrc(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1); -} - -static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_usbsrc(clk, rate); - - if ((parent_rate / rate) == 2) - clkdivn |= S3C2412_CLKDIVN_USB48DIV; - else - clkdivn &= ~S3C2412_CLKDIVN_USB48DIV; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_usbsrc = { - .name = "usbsrc", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_usbsrc, - .set_rate = s3c2412_setrate_usbsrc, - .round_rate = s3c2412_roundrate_usbsrc, - .set_parent = s3c2412_setparent_usbsrc, - }, -}; - -static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_mdivclk) - clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_msysclk = { - .name = "msysclk", - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_msysclk, - }, -}; - -static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - unsigned long clkdiv; - unsigned long dvs; - - /* Note, we current equate fclk andf msysclk for S3C2412 */ - - if (parent == &clk_msysclk || parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2412_CLKDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - /* update this under irq lockdown, clkdivn is not protected - * by the clock system. */ - - local_irq_save(flags); - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - clkdiv &= ~S3C2412_CLKDIVN_DVSEN; - clkdiv |= dvs; - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - local_irq_restore(flags); - - return 0; -} - -static struct clk clk_armclk = { - .name = "armclk", - .parent = &clk_msysclk, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_armclk, - }, -}; - -/* these next clocks have an divider immediately after them, - * so we can register them with their divider and leave out the - * intermediate clock stage -*/ -static unsigned long s3c2412_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations as they cancel out */ - - div = (rate / parent_rate); - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / div; -} - -static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_uart(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_UARTDIV_MASK; - div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_uart = { - .name = "uartclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_uart, - .set_rate = s3c2412_setrate_uart, - .set_parent = s3c2412_setparent_uart, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_i2s(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_I2SDIV_MASK; - div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_i2s = { - .name = "i2sclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_i2s, - .set_rate = s3c2412_setrate_i2s, - .set_parent = s3c2412_setparent_i2s, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} -static unsigned long s3c2412_getrate_cam(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_CAMDIV_MASK; - div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_cam = { - .name = "camif-upll", /* same as 2440 name */ - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_cam, - .set_rate = s3c2412_setrate_cam, - .set_parent = s3c2412_setparent_cam, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SPI, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma.0", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA0, - }, { - .name = "dma.1", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA1, - }, { - .name = "dma.2", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA2, - }, { - .name = "dma.3", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA3, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_LCDC, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBD, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_PWMT, - }, { - .name = "uart", - .devname = "s3c2412-uart.0", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2412-uart.1", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2412-uart.2", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART2, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, - }, { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_DEV48, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_HOST48, - } -}; - -/* clocks to add where we need to check their parentage */ - -struct clk_init { - struct clk *clk; - unsigned int bit; - struct clk *src_0; - struct clk *src_1; -}; - -static struct clk_init clks_src[] __initdata = { - { - .clk = &clk_usysclk, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_urefclk, - .src_1 = &clk_upll, - }, { - .clk = &clk_i2s, - .bit = S3C2412_CLKSRC_I2SCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_cam, - .bit = S3C2412_CLKSRC_CAMCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - }, { - .clk = &clk_msysclk, - .bit = S3C2412_CLKSRC_MSYSCLK_MPLL, - .src_0 = &clk_mdivclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_uart, - .bit = S3C2412_CLKSRC_UARTCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_usbsrc, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - /* here we assume OM[4] select xtal */ - }, { - .clk = &clk_erefclk, - .bit = S3C2412_CLKSRC_EREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, { - .clk = &clk_urefclk, - .bit = S3C2412_CLKSRC_UREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, -}; - -/* s3c2412_clk_initparents - * - * Initialise the parents for the clocks that we get at start-time -*/ - -static void __init s3c2412_clk_initparents(void) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - struct clk_init *cip = clks_src; - struct clk *src; - int ptr; - int ret; - - for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) { - ret = s3c24xx_register_clock(cip->clk); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - cip->clk->name, ret); - } - - src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0; - - printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name); - clk_set_parent(cip->clk, src); - } -} - -/* clocks to add straight away */ - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_usb_bus, - &clk_mrefclk, - &clk_armclk, -}; - -static struct clk_lookup s3c2412_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk), -}; - -int __init s3c2412_baseclk_add(void) -{ - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - unsigned int dvs; - struct clk *clkp; - int ret; - int ptr; - - clk_upll.enable = s3c2412_upll_enable; - clk_usb_bus.parent = &clk_usbsrc; - clk_usb_bus.rate = 0x0; - - clk_f.parent = &clk_msysclk; - - s3c2412_clk_initparents(); - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* set the dvs state according to what we got at boot time */ - - dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN; - - if (dvs) - clk_armclk.parent = &clk_h; - - printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off"); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n"); - - /* for the moment, let's use the UPLL, and see if we can - * get 48MHz */ - - clk_set_parent(&clk_usysclk, &clk_upll); - clk_set_parent(&clk_usbsrc, &clk_usysclk); - clk_set_rate(&clk_usbsrc, 48*1000*1000); - } - - printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on", - print_mhz(clk_get_rate(&clk_upll)), - print_mhz(clk_get_rate(&clk_usb_bus))); - - /* register clocks from clock array */ - - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2412_clkcon_enable(clkp, 0); - } - - clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup)); - return 0; -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c deleted file mode 100644 index d421a72920a5..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ /dev/null @@ -1,171 +0,0 @@ -/* linux/arch/arm/mach-s3c2416/clock.c - * - * Copyright (c) 2010 Simtec Electronics - * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org> - * - * S3C2416 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/clk.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> -#include <plat/pll.h> - -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> -#include <mach/regs-s3c2443-clock.h> - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[8] = { - [0] = 1, - [1] = 2, - [2] = 3, - [3] = 4, - [5] = 6, - [7] = 8, -}; - -static struct clksrc_clk hsspi_eplldiv = { - .clk = { - .name = "hsspi-eplldiv", - .parent = &clk_esysclk.clk, - .ctrlbit = (1 << 14), - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 }, -}; - -static struct clk *hsspi_sources[] = { - [0] = &hsspi_eplldiv.clk, - [1] = NULL, /* to fix */ -}; - -static struct clksrc_clk hsspi_mux = { - .clk = { - .name = "hsspi-if", - }, - .sources = &(struct clksrc_sources) { - .sources = hsspi_sources, - .nr_sources = ARRAY_SIZE(hsspi_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 }, -}; - -static struct clksrc_clk hsmmc_div[] = { - [0] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.0", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 }, - }, - [1] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, - }, -}; - -static struct clksrc_clk hsmmc_mux0 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 6), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[0].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 }, -}; - -static struct clksrc_clk hsmmc_mux1 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 12), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[1].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 }, -}; - -static struct clk hsmmc0_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2416_HCLKCON_HSMMC0, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &hsspi_eplldiv, - &hsspi_mux, - &hsmmc_div[0], - &hsmmc_div[1], - &hsmmc_mux0, - &hsmmc_mux1, -}; - -static struct clk_lookup s3c2416_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk), - /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */ - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk), -}; - -void __init s3c2416_init_clocks(int xtal) -{ - u32 epllcon = __raw_readl(S3C2443_EPLLCON); - u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4); - int ptr; - - /* s3c2416 EPLL compatible with s3c64xx */ - clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1); - - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2416_get_pll, - armdiv, ARRAY_SIZE(armdiv), - S3C2416_CLKDIV0_ARMDIV_MASK); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c24xx_register_clock(&hsmmc0_clk); - clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup)); - -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c deleted file mode 100644 index 5527226fd61f..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/clock.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440 Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mutex.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* S3C2440 extended clock support */ - -static unsigned long s3c2440_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div = (parent_rate / rate) / 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2440_camif_upll_round(clk, rate); - - camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK); - - if (rate != parent_rate) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static unsigned long s3c2440_camif_upll_getrate(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL)) - return parent_rate; - - camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK; - - return parent_rate / (camdivn + 1) / 2; -} - -/* Extra S3C2440 clocks */ - -static struct clk s3c2440_clk_cam = { - .name = "camif", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2440_clk_cam_upll = { - .name = "camif-upll", - .ops = &(struct clk_ops) { - .set_rate = s3c2440_camif_upll_setrate, - .get_rate = s3c2440_camif_upll_getrate, - .round_rate = s3c2440_camif_upll_round, - }, -}; - -static struct clk s3c2440_clk_ac97 = { - .name = "ac97", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_AC97, -}; - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) -{ - unsigned long ucon0, ucon1, ucon2, divisor; - - /* the fun of calculating the uart divisors on the s3c2440 */ - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) - divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6; - else if (ucon1 != 0) - divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21; - else if (ucon2 != 0) - divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36; - else - /* manual calims 44, seems to be 9 */ - divisor = 9; - - return clk_get_rate(clk->parent) / divisor; -} - -static struct clk s3c2440_clk_fclk_n = { - .name = "fclk_n", - .parent = &clk_f, - .ops = &(struct clk_ops) { - .get_rate = s3c2440_fclk_n_getrate, - }, -}; - -static struct clk_lookup s3c2440_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), - CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0), - CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1), - CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2), - CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll), -}; - -static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2440_clk_cam.parent = clock_h; - s3c2440_clk_ac97.parent = clock_p; - s3c2440_clk_cam_upll.parent = clock_upll; - s3c24xx_register_clock(&s3c2440_clk_fclk_n); - - s3c24xx_register_clock(&s3c2440_clk_ac97); - s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_cam_upll); - clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup)); - - clk_disable(&s3c2440_clk_ac97); - clk_disable(&s3c2440_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_clk_add, -}; - -static __init int s3c24xx_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c24xx_clk_init); diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c deleted file mode 100644 index 76cd31f7804e..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ /dev/null @@ -1,212 +0,0 @@ -/* linux/arch/arm/mach-s3c2443/clock.c - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2443 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/serial_core.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/cpu-freq.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -/* clock selections */ - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[16] = { - [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, - [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, - [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, - [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, - [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, - [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, - [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, - [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, -}; - -/* hsspi - * - * high-speed spi clock, sourced from esysclk -*/ - -static struct clksrc_clk clk_hsspi = { - .clk = { - .name = "hsspi-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_HSSPICLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - - -/* clk_hsmcc_div - * - * this clock is sourced from epll, and is fed through a divider, - * to a mux controlled by sclkcon where either it or a extclk can - * be fed to the hsmmc block -*/ - -static struct clksrc_clk clk_hsmmc_div = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, -}; - -static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2443_SCLKCON); - - clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT | - S3C2443_SCLKCON_HSMMCCLK_EPLL); - - if (parent == &clk_epll) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL; - else if (parent == &clk_ext) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT; - else - return -EINVAL; - - if (clk->usage > 0) { - __raw_writel(clksrc, S3C2443_SCLKCON); - } - - clk->parent = parent; - return 0; -} - -static int s3c2443_enable_hsmmc(struct clk *clk, int enable) -{ - return s3c2443_setparent_hsmmc(clk, clk->parent); -} - -static struct clk clk_hsmmc = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .parent = &clk_hsmmc_div.clk, - .enable = s3c2443_enable_hsmmc, - .ops = &(struct clk_ops) { - .set_parent = s3c2443_setparent_hsmmc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SDI, - }, { - .name = "spi", - .devname = "s3c2410-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SPI1, - } -}; - -/* clocks to add straight away */ - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_hsspi, - &clk_hsmmc_div, -}; - -static struct clk *clks[] __initdata = { - &clk_hsmmc, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk), -}; - -void __init s3c2443_init_clocks(int xtal) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - int ptr; - - clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, - armdiv, ARRAY_SIZE(armdiv), - S3C2443_CLKDIV0_ARMDIV_MASK); - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c244x.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c deleted file mode 100644 index 6d9b688c442b..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c244x.c +++ /dev/null @@ -1,141 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c - * - * Copyright (c) 2004-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440/S3C2442 Common clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long camdivn; - unsigned long dvs; - - if (parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2440_CAMDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - camdivn = __raw_readl(S3C2440_CAMDIVN); - camdivn &= ~S3C2440_CAMDIVN_DVSEN; - camdivn |= dvs; - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .ops = &(struct clk_ops) { - .set_parent = s3c2440_setparent_armclk, - }, -}; - -static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; - struct clk *clock_upll; - int ret; - - printk("S3C244X: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - - clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; - - ret = s3c24xx_register_clock(&clk_arm); - if (ret < 0) { - printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); - return ret; - } - - clock_upll = clk_get(NULL, "upll"); - if (IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); - return -ENOENT; - } - - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - spin_lock(&clocks_lock); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - spin_unlock(&clocks_lock); - } - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2440_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c2440_clk_init); - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c deleted file mode 100644 index 65d3eef73090..000000000000 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ /dev/null @@ -1,675 +0,0 @@ -/* - * Common code for SoCs starting with the S3C2443 - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> - - -static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) -{ - u32 ctrlbit = clk->ctrlbit; - u32 con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -int s3c2443_clkcon_enable_h(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_HCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_p(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_PCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_s(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_SCLKCON, clk, enable); -} - -/* mpllref is a direct descendant of clk_xtal by default, but it is not - * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as - * such directly equating the two source clocks is impossible. - */ -static struct clk clk_mpllref = { - .name = "mpllref", - .parent = &clk_xtal, -}; - -static struct clk *clk_epllref_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpllref, - [2] = &clk_xtal, - [3] = &clk_ext, -}; - -struct clksrc_clk clk_epllref = { - .clk = { - .name = "epllref", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_epllref_sources, - .nr_sources = ARRAY_SIZE(clk_epllref_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, -}; - -/* esysclk - * - * this is sourced from either the EPLL or the EPLLref clock -*/ - -static struct clk *clk_sysclk_sources[] = { - [0] = &clk_epllref.clk, - [1] = &clk_epll, -}; - -struct clksrc_clk clk_esysclk = { - .clk = { - .name = "esysclk", - .parent = &clk_epll, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_sysclk_sources, - .nr_sources = ARRAY_SIZE(clk_sysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, -}; - -static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV0); - - div &= S3C2443_CLKDIV0_EXTDIV_MASK; - div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ - - return parent_rate / (div + 1); -} - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_mpllref, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_getrate_mdivclk, - }, -}; - -static struct clk *clk_msysclk_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpll, - [2] = &clk_mdivclk, - [3] = &clk_mpllref, -}; - -static struct clksrc_clk clk_msysclk = { - .clk = { - .name = "msysclk", - .parent = &clk_xtal, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_msysclk_sources, - .nr_sources = ARRAY_SIZE(clk_msysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, -}; - -/* prediv - * - * this divides the msysclk down to pass to h/p/etc. - */ - -static unsigned long s3c2443_prediv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; - clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; - - return rate / (clkdiv0 + 1); -} - -static struct clk clk_prediv = { - .name = "prediv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_prediv_getrate, - }, -}; - -/* hclk divider - * - * divides the prediv and provides the hclk. - */ - -static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_h_ops = { - .get_rate = s3c2443_hclkdiv_getrate, -}; - -/* pclk divider - * - * divides the hclk and provides the pclk. - */ - -static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0); - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_p_ops = { - .get_rate = s3c2443_pclkdiv_getrate, -}; - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. -*/ - -static unsigned int *armdiv; -static int nr_armdiv; -static int armdivmask; - -static unsigned long s3c2443_armclk_roundrate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned best = 256; /* bigger than any value */ - unsigned div; - int ptr; - - if (!nr_armdiv) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) - best = div; - } - } - - return parent / best; -} - -static unsigned long s3c2443_armclk_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkcon0; - int val; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= armdivmask; - val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT; - - return rate / armdiv[val]; -} - -static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned div; - unsigned best = 256; /* bigger than any value */ - int ptr; - int val = -1; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) { - best = div; - val = ptr; - } - } - } - - if (val >= 0) { - unsigned long clkcon0; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= ~armdivmask; - clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; - __raw_writel(clkcon0, S3C2443_CLKDIV0); - } - - return (val == -1) ? -EINVAL : 0; -} - -static struct clk clk_armdiv = { - .name = "armdiv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .round_rate = s3c2443_armclk_roundrate, - .get_rate = s3c2443_armclk_getrate, - .set_rate = s3c2443_armclk_setrate, - }, -}; - -/* armclk - * - * this is the clock fed into the ARM core itself, from armdiv or from hclk. - */ - -static struct clk *clk_arm_sources[] = { - [0] = &clk_armdiv, - [1] = &clk_h, -}; - -static struct clksrc_clk clk_arm = { - .clk = { - .name = "armclk", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_arm_sources, - .nr_sources = ARRAY_SIZE(clk_arm_sources), - }, - .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, -}; - -/* usbhost - * - * usb host bus-clock, usually 48MHz to provide USB bus clock timing -*/ - -static struct clksrc_clk clk_usb_bus_host = { - .clk = { - .name = "usb-bus-host-parent", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_USBHOST, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - -/* common clksrc clocks */ - -static struct clksrc_clk clksrc_clks[] = { - { - /* camera interface bus-clock, divided down from esysclk */ - .clk = { - .name = "camif-upll", /* same as 2440 name */ - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_CAMCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, - }, { - .clk = { - .name = "display-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_DISPCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, - }, -}; - -static struct clksrc_clk clk_esys_uart = { - /* ART baud-rate clock sourced from esysclk via a divisor */ - .clk = { - .name = "uartclk", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, -}; - -static struct clk clk_i2s_ext = { - .name = "i2s-ext", -}; - -/* i2s_eplldiv - * - * This clock is the output from the I2S divisor of ESYSCLK, and is separate - * from the mux that comes after it (cannot merge into one single clock) -*/ - -static struct clksrc_clk clk_i2s_eplldiv = { - .clk = { - .name = "i2s-eplldiv", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, -}; - -/* i2s-ref - * - * i2s bus reference clock, selectable from external, esysclk or epllref - * - * Note, this used to be two clocks, but was compressed into one. -*/ - -static struct clk *clk_i2s_srclist[] = { - [0] = &clk_i2s_eplldiv.clk, - [1] = &clk_i2s_ext, - [2] = &clk_epllref.clk, - [3] = &clk_epllref.clk, -}; - -static struct clksrc_clk clk_i2s = { - .clk = { - .name = "i2s-if", - .ctrlbit = S3C2443_SCLKCON_I2SCLK, - .enable = s3c2443_clkcon_enable_s, - - }, - .sources = &(struct clksrc_sources) { - .sources = clk_i2s_srclist, - .nr_sources = ARRAY_SIZE(clk_i2s_srclist), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "iis", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIS, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIC, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma.0", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA0, - }, { - .name = "dma.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA1, - }, { - .name = "dma.2", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA2, - }, { - .name = "dma.3", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA3, - }, { - .name = "dma.4", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA4, - }, { - .name = "dma.5", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA5, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBD, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_LCDC, - - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_PWMT, - }, { - .name = "cfc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_CFC, - }, { - .name = "ssmc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_SSMC, - }, { - .name = "uart", - .devname = "s3c2440-uart.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2440-uart.1", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2440-uart.2", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART2, - }, { - .name = "uart", - .devname = "s3c2440-uart.3", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART3, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_WDT, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_AC97, - }, { - .name = "nand", - .parent = &clk_h, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus_host.clk, - } -}; - -static struct clk hsmmc1_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_HSMMC, -}; - -static struct clk hsspi_clk = { - .name = "spi", - .devname = "s3c2443-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_HSSPI, -}; - -/* EPLLCON compatible enough to get on/off information */ - -void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - struct clk *xtal_clk; - unsigned long xtal; - unsigned long pll; - int ptr; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - pll = get_mpll(mpllcon, xtal); - clk_msysclk.clk.rate = pll; - clk_mpll.rate = pll; - - printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)), - print_mhz(clk_get_rate(&clk_h)), - print_mhz(clk_get_rate(&clk_p))); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) - s3c_set_clksrc(&clksrc_clks[ptr], true); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); - clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); - } - - printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(clk_get_rate(&clk_epll)), - print_mhz(clk_get_rate(&clk_usb_bus))); -} - -static struct clk *clks[] __initdata = { - &clk_prediv, - &clk_mpllref, - &clk_mdivclk, - &clk_ext, - &clk_epll, - &clk_usb_bus, - &clk_armdiv, - &hsmmc1_clk, - &hsspi_clk, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_i2s_eplldiv, - &clk_i2s, - &clk_usb_bus_host, - &clk_epllref, - &clk_esysclk, - &clk_msysclk, - &clk_arm, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk), -}; - -void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - unsigned int *divs, int nr_divs, - int divmask) -{ - int ptr; - - armdiv = divs; - nr_armdiv = nr_divs; - armdivmask = divmask; - - /* s3c2443 parents h clock from prediv */ - clk_h.parent = &clk_prediv; - clk_h.ops = &clk_h_ops; - - /* and p clock from h clock */ - clk_p.parent = &clk_h; - clk_p.ops = &clk_p_ops; - - clk_usb_bus.parent = &clk_usb_bus_host.clk; - clk_epll.parent = &clk_epllref.clk; - - s3c24xx_register_baseclocks(xtal); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - /* See s3c2443/etc notes on disabling clocks at init time */ - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); - - s3c2443_common_setup_clocks(get_mpll); -} diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 1bc8e73c94f9..c0763b837745 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -53,6 +53,7 @@ #include <plat/cpu-freq.h> #include <plat/pll.h> #include <plat/pwm-core.h> +#include <plat/watchdog-reset.h> #include "common.h" @@ -73,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410000, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410_init, .name = name_s3c2410 @@ -82,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410002, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410a_init, .name = name_s3c2410a @@ -91,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440000, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440 @@ -100,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440001, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440a @@ -109,7 +106,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aaa, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442 @@ -118,7 +114,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aab, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442b @@ -127,7 +122,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412001, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -136,7 +130,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412003, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -145,7 +138,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32450003, .idmask = 0xffffffff, .map_io = s3c2416_map_io, - .init_clocks = s3c2416_init_clocks, .init_uarts = s3c2416_init_uarts, .init = s3c2416_init, .name = name_s3c2416, @@ -154,7 +146,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32443001, .idmask = 0xffffffff, .map_io = s3c2443_map_io, - .init_clocks = s3c2443_init_clocks, .init_uarts = s3c2443_init_uarts, .init = s3c2443_init, .name = name_s3c2443, @@ -316,21 +307,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { }, }; -/* initialise all the clocks */ - -void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, - unsigned long hclk, - unsigned long pclk) -{ - clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON), - clk_xtal.rate); - - clk_mpll.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; -} - #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) static struct resource s3c2410_dma_resource[] = { @@ -534,3 +510,62 @@ struct platform_device s3c2443_device_dma = { }, }; #endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410) +void __init s3c2410_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#ifdef CONFIG_CPU_S3C2412 +void __init s3c2412_init_clocks(int xtal) +{ + s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); +} +#endif + +#ifdef CONFIG_CPU_S3C2416 +void __init s3c2416_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440) +void __init s3c2440_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442) +void __init s3c2442_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#ifdef CONFIG_CPU_S3C2443 +void __init s3c2443_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \ + defined(CONFIG_CPU_S3C2442) +static struct resource s3c2410_dclk_resource[] = { + [0] = DEFINE_RES_MEM(0x56000084, 0x4), +}; + +struct platform_device s3c2410_device_dclk = { + .name = "s3c2410-dclk", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dclk_resource), + .resource = s3c2410_dclk_resource, +}; +#endif diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index e46c10417216..ac3ff12a0601 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -67,16 +67,15 @@ extern struct syscore_ops s3c2416_irq_syscore_ops; #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) extern void s3c244x_map_io(void); extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c244x_init_clocks(int xtal); extern void s3c244x_restart(enum reboot_mode mode, const char *cmd); #else -#define s3c244x_init_clocks NULL #define s3c244x_init_uarts NULL #endif #ifdef CONFIG_CPU_S3C2440 extern int s3c2440_init(void); extern void s3c2440_map_io(void); +extern void s3c2440_init_clocks(int xtal); extern void s3c2440_init_irq(void); #else #define s3c2440_init NULL @@ -86,6 +85,7 @@ extern void s3c2440_init_irq(void); #ifdef CONFIG_CPU_S3C2442 extern int s3c2442_init(void); extern void s3c2442_map_io(void); +extern void s3c2442_init_clocks(int xtal); extern void s3c2442_init_irq(void); #else #define s3c2442_init NULL @@ -114,4 +114,21 @@ extern struct platform_device s3c2412_device_dma; extern struct platform_device s3c2440_device_dma; extern struct platform_device s3c2443_device_dma; +extern struct platform_device s3c2410_device_dclk; + +#ifdef CONFIG_S3C2410_COMMON_CLK +void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2412_COMMON_CLK +void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2443_COMMON_CLK +void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif + #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index 2a0aa5684e72..d4d9514335f4 100644 --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -14,6 +14,7 @@ #include <linux/errno.h> #include <linux/cpufreq.h> #include <linux/io.h> +#include <linux/clk.h> #include <mach/map.h> #include <mach/regs-clock.h> @@ -60,5 +61,6 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) */ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) { - __raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON); + if (!IS_ERR(cfg->mpll)) + clk_set_rate(cfg->mpll, cfg->pll.frequency); } diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h index 3415b60082d7..3db6c10de023 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h @@ -42,24 +42,6 @@ #define S3C2410_CLKCON_IIS (1<<17) #define S3C2410_CLKCON_SPI (1<<18) -/* DCLKCON register addresses in gpio.h */ - -#define S3C2410_DCLKCON_DCLK0EN (1<<0) -#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1) -#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1) -#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4) -#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8) -#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4) -#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8) - -#define S3C2410_DCLKCON_DCLK1EN (1<<16) -#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17) -#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17) -#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24) -#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24) - #define S3C2410_CLKDIVN_PDIVN (1<<0) #define S3C2410_CLKDIVN_HDIVN (1<<1) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index c2ef016032ab..c6583cfa5835 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -457,9 +457,6 @@ /* miscellaneous control */ #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) -#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) - -#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) /* see clock.h for dclk definitions */ diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 8ac9554aa996..5157e250dd13 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = { static void __init amlm5900_map_io(void) { s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init amlm5900_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + #ifdef CONFIG_FB_S3C2410 static struct s3c2410fb_display __initdata amlm5900_lcd_info = { .width = 160, @@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900") .map_io = amlm5900_map_io, .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, - .init_time = samsung_timer_init, + .init_time = amlm5900_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 81a270af2336..e053581cab0b 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -46,7 +46,6 @@ #include <net/ax88796.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> @@ -352,6 +351,7 @@ static struct platform_device anubis_device_sm501 = { /* Standard Anubis devices */ static struct platform_device *anubis_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_wdt, &s3c_device_adc, @@ -364,14 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = { &anubis_device_sm501, }; -static struct clk *anubis_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - /* I2C devices. */ static struct i2c_board_info anubis_i2c_devs[] __initdata = { @@ -394,23 +386,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { static void __init anubis_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks)); - s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -428,6 +404,12 @@ static void __init anubis_map_io(void) } } +static void __init anubis_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init anubis_init(void) { s3c_i2c0_set_platdata(NULL); @@ -447,6 +429,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .map_io = anubis_map_io, .init_machine = anubis_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = anubis_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index d8f6bb1096cb..9db768f448a5 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -45,7 +45,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/mmc-s3cmci.h> @@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = { static void __init at2440evb_map_io(void) { s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init at2440evb_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); +} + static void __init at2440evb_init(void) { s3c24xx_fb_set_platdata(&at2440evb_fb_info); @@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .map_io = at2440evb_map_io, .init_machine = at2440evb_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = at2440evb_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index e371ff53a408..f9112b801a33 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -51,7 +51,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/devs.h> @@ -523,6 +522,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = { // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 static struct platform_device *bast_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -537,14 +537,6 @@ static struct platform_device *bast_devices[] __initdata = { &bast_sio, }; -static struct clk *bast_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata bast_cpufreq = { .refresh = 7800, /* 7.8usec */ .auto_io = 1, @@ -558,29 +550,19 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = { static void __init bast_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - s3c_hwmon_set_platdata(&bast_hwmon_info); s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init bast_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init bast_init(void) { register_syscore_ops(&bast_pm_syscore_ops); @@ -608,6 +590,6 @@ MACHINE_START(BAST, "Simtec-BAST") .map_io = bast_map_io, .init_irq = s3c2410_init_irq, .init_machine = bast_init, - .init_time = samsung_timer_init, + .init_time = bast_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index dc4db849f0fd..fc3a08d0cb3f 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = { static void __init gta02_map_io(void) { s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -585,6 +584,11 @@ static void __init gta02_machine_init(void) regulator_has_full_constraints(); } +static void __init gta02_init_time(void) +{ + s3c2442_init_clocks(12000000); + samsung_timer_init(); +} MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ @@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .map_io = gta02_map_io, .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, - .init_time = samsung_timer_init, + .init_time = gta02_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index e453acd92cbf..fbf5487ae5d1 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -57,7 +57,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> @@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = { static void __init h1940_map_io(void) { s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -662,6 +660,12 @@ static void __init h1940_map_io(void) WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); } +static void __init h1940_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + /* H1940 and RX3715 need to reserve this for suspend */ static void __init h1940_reserve(void) { @@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940") .reserve = h1940_reserve, .init_irq = s3c2410_init_irq, .init_machine = h1940_init, - .init_time = samsung_timer_init, + .init_time = h1940_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 5faa7239e7d6..e81ea82c55f9 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -507,11 +507,16 @@ static struct syscore_ops jive_pm_syscore_ops = { static void __init jive_map_io(void) { s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init jive_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void jive_power_off(void) { printk(KERN_INFO "powering system down...\n"); @@ -665,6 +670,6 @@ MACHINE_START(JIVE, "JIVE") .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, - .init_time = samsung_timer_init, + .init_time = jive_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 9e57fd9f4f3b..5cc40ec1d254 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -54,7 +54,6 @@ #include <linux/mtd/partitions.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = { static void __init mini2440_map_io(void) { s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init mini2440_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + /* * mini2440_features string * @@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440") .map_io = mini2440_map_io, .init_machine = mini2440_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = mini2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 4cccaad34847..3ac2a54348d6 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -45,7 +45,6 @@ #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <linux/platform_data/mmc-s3cmci.h> @@ -535,11 +534,16 @@ static void __init n30_map_io(void) { s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); n30_hwinit(); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init n30_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + /* GPB3 is the line that controls the pull-up for the USB D+ line */ static void __init n30_init(void) @@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_time = samsung_timer_init, + .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, @@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, - .init_time = samsung_timer_init, + .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 3066851f584d..c82c281ce351 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -42,7 +42,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -135,13 +134,18 @@ static void __init nexcoder_sensorboard_init(void) static void __init nexcoder_map_io(void) { s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); nexcoder_sensorboard_init(); } +static void __init nexcoder_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init nexcoder_init(void) { s3c_i2c0_set_platdata(NULL); @@ -154,6 +158,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .map_io = nexcoder_map_io, .init_machine = nexcoder_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = nexcoder_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index a4ae4bb3666d..189147b80eca 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -40,7 +40,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/devs.h> @@ -344,20 +343,13 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = { /* Standard Osiris devices */ static struct platform_device *osiris_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_i2c0, &s3c_device_wdt, &s3c_device_nand, &osiris_pcmcia, }; -static struct clk *osiris_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata osiris_cpufreq = { .refresh = 7800, /* refresh period is 7.8usec */ .auto_io = 1, @@ -368,23 +360,7 @@ static void __init osiris_map_io(void) { unsigned long flags; - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks)); - s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -408,6 +384,12 @@ static void __init osiris_map_io(void) local_irq_restore(flags); } +static void __init osiris_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init osiris_init(void) { register_syscore_ops(&osiris_pm_syscore_ops); @@ -429,6 +411,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .map_io = osiris_map_io, .init_irq = s3c2440_init_irq, .init_machine = osiris_init, - .init_time = samsung_timer_init, + .init_time = osiris_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index bdb3faac2d9b..45833001186d 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -30,7 +30,6 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/samsung-time.h> @@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = { static void __init otom11_map_io(void) { s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init otom11_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init otom11_init(void) { s3c_i2c0_set_platdata(NULL); @@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .map_io = otom11_map_io, .init_machine = otom11_init, .init_irq = s3c2410_init_irq, - .init_time = samsung_timer_init, + .init_time = otom11_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 8c12787a8fd3..228c9094519d 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup); static void __init qt2410_map_io(void) { s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); - s3c24xx_init_clocks(12*1000*1000); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init qt2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init qt2410_machine_init(void) { s3c_nand_set_platdata(&qt2410_nand_info); @@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410") .map_io = qt2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, - .init_time = samsung_timer_init, + .init_time = qt2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index afb784e934c8..e2c6541909c1 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -54,7 +54,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> @@ -710,6 +709,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = { }; static struct platform_device *rx1950_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, @@ -728,20 +728,9 @@ static struct platform_device *rx1950_devices[] __initdata = { &rx1950_leds, }; -static struct clk *rx1950_clocks[] __initdata = { - &s3c24xx_clkout0, - &s3c24xx_clkout1, -}; - static void __init rx1950_map_io(void) { - s3c24xx_clkout0.parent = &clk_h; - s3c24xx_clkout1.parent = &clk_f; - - s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks)); - s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -754,6 +743,12 @@ static void __init rx1950_map_io(void) s3c_pm_init(); } +static void __init rx1950_init_time(void) +{ + s3c2442_init_clocks(16934000); + samsung_timer_init(); +} + static void __init rx1950_init_machine(void) { int i; @@ -816,6 +811,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .reserve = rx1950_reserve, .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, - .init_time = samsung_timer_init, + .init_time = rx1950_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index e6535ce1bc5c..6e749ec3a2ea 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -46,7 +46,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> @@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = { static void __init rx3715_map_io(void) { s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init rx3715_init_time(void) +{ + s3c2440_init_clocks(16934000); + samsung_timer_init(); +} + /* H1940 and RX3715 need to reserve this for suspend */ static void __init rx3715_reserve(void) { @@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .reserve = rx3715_reserve, .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, - .init_time = samsung_timer_init, + .init_time = rx3715_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 70f0900d4bca..e4dcb9aa2ca2 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -18,7 +18,6 @@ #include <linux/clocksource.h> #include <linux/irqchip.h> #include <linux/of_platform.h> -#include <linux/serial_core.h> #include <linux/serial_s3c.h> #include <asm/mach/arch.h> @@ -29,48 +28,14 @@ #include "common.h" -/* - * The following lookup table is used to override device names when devices - * are registered from device tree. This is temporarily added to enable - * device tree support addition for the S3C2416 architecture. - * - * For drivers that require platform data to be provided from the machine - * file, a platform data pointer can also be supplied along with the - * devices names. Usually, the platform data elements that cannot be parsed - * from the device tree by the drivers (example: function pointers) are - * supplied. But it should be noted that this is a temporary mechanism and - * at some point, the drivers should be capable of parsing all the platform - * data from the device tree. - */ -static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, - "s3c2440-uart.0", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, - "s3c2440-uart.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, - "s3c2440-uart.2", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, - "s3c2440-uart.3", NULL), - OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, - "s3c-sdhci.0", NULL), - OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1, - "s3c-sdhci.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC, - "s3c2440-i2c.0", NULL), - {}, -}; - static void __init s3c2416_dt_map_io(void) { s3c24xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); } static void __init s3c2416_dt_machine_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - s3c2416_auxdata_lookup, NULL); - + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); s3c_pm_init(); } @@ -86,6 +51,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") .map_io = s3c2416_dt_map_io, .init_irq = irqchip_init, .init_machine = s3c2416_dt_machine_init, - .init_time = clocksource_of_init, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index f32924ee0e9f..419fadd6e446 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = { static void __init smdk2410_map_io(void) { s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2410_init(void) { s3c_i2c0_set_platdata(NULL); @@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc .map_io = smdk2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, - .init_time = samsung_timer_init, + .init_time = smdk2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 233fe52d2015..a38f8a049e22 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -106,11 +106,16 @@ static void __init smdk2413_fixup(struct tag *tags, char **cmdline, static void __init smdk2413_map_io(void) { s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2413_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2413_machine_init(void) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ @@ -159,6 +164,6 @@ MACHINE_START(SMDK2413, "SMDK2413") .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2413_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index b3b54d8e1410..fa6f30d23601 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -219,10 +219,15 @@ static struct platform_device *smdk2416_devices[] __initdata = { &s3c2443_device_dma, }; +static void __init smdk2416_init_time(void) +{ + s3c2416_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2416_map_io(void) { s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -257,6 +262,6 @@ MACHINE_START(SMDK2416, "SMDK2416") .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2416_init_time, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index d071dcfea548..5fb89c0ae17a 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -38,7 +38,6 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = { static void __init smdk2440_map_io(void) { s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2440_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); +} + static void __init smdk2440_machine_init(void) { s3c24xx_fb_set_platdata(&smdk2440_fb_info); @@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440") .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 06c4d77de3a5..ef5d5ea33182 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -121,11 +121,16 @@ static struct platform_device *smdk2443_devices[] __initdata = { static void __init smdk2443_map_io(void) { s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2443_init_time(void) +{ + s3c2443_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2443_machine_init(void) { s3c_i2c0_set_platdata(NULL); @@ -145,6 +150,6 @@ MACHINE_START(SMDK2443, "SMDK2443") .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2443_init_time, .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 4108b2f0cede..c616ca2d409e 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = { static void __init tct_hammer_map_io(void) { s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init tct_hammer_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init tct_hammer_init(void) { s3c_i2c0_set_platdata(NULL); @@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .map_io = tct_hammer_map_io, .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, - .init_time = samsung_timer_init, + .init_time = tct_hammer_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 1cc5b1bd51cd..f88c584c3001 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -43,7 +43,6 @@ #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/samsung-time.h> @@ -286,6 +285,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = { /* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -299,14 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = { &vr1000_led3, }; -static struct clk *vr1000_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static void vr1000_power_off(void) { gpio_direction_output(S3C2410_GPB(9), 1); @@ -314,29 +306,19 @@ static void vr1000_power_off(void) static void __init vr1000_map_io(void) { - /* initialise clock sources */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = NULL; - s3c24xx_dclk1.rate = 3692307; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks)); - pm_power_off = vr1000_power_off; s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init vr1000_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init vr1000_init(void) { s3c_i2c0_set_platdata(NULL); @@ -357,6 +339,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .map_io = vr1000_map_io, .init_machine = vr1000_init, .init_irq = s3c2410_init_irq, - .init_time = samsung_timer_init, + .init_time = vr1000_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 40868c0e0a68..6b706c915387 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -142,11 +142,16 @@ static void __init vstms_fixup(struct tag *tags, char **cmdline, static void __init vstms_map_io(void) { s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init vstms_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void __init vstms_init(void) { s3c_i2c0_set_platdata(NULL); @@ -162,6 +167,6 @@ MACHINE_START(VSTMS, "VSTMS") .init_irq = s3c2412_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, - .init_time = samsung_timer_init, + .init_time = vstms_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 68ea5b7e5dc7..b19256ec8d40 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -51,9 +51,6 @@ #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { - SAVE_ITEM(S3C2410_LOCKTIME), - SAVE_ITEM(S3C2410_CLKCON), - /* we restore the timings here, with the proviso that the board * brings the system up in an slower, or equal frequency setting * to the original system. @@ -69,18 +66,6 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_BANKCON3), SAVE_ITEM(S3C2410_BANKCON4), SAVE_ITEM(S3C2410_BANKCON5), - -#ifndef CONFIG_CPU_FREQ - SAVE_ITEM(S3C2410_CLKDIVN), - SAVE_ITEM(S3C2410_MPLLCON), - SAVE_ITEM(S3C2410_REFRESH), -#endif - SAVE_ITEM(S3C2410_UPLLCON), - SAVE_ITEM(S3C2410_CLKSLOW), -}; - -static struct sleep_save misc_save[] = { - SAVE_ITEM(S3C2410_DCLKCON), }; /* s3c_pm_check_resume_pin @@ -140,12 +125,10 @@ void s3c_pm_configure_extint(void) void s3c_pm_restore_core(void) { s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); } void s3c_pm_save_core(void) { - s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); } diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 04b58cb49888..7eab88829883 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -85,62 +85,6 @@ void __init s3c2410_map_io(void) void __init_or_cpufreq s3c2410_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -/* fake ARMCLK for use with cpufreq, etc. */ - -static struct clk s3c2410_armclk = { - .name = "armclk", - .parent = &clk_f, - .id = -1, -}; - -static struct clk_lookup s3c2410_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), -}; - -void __init s3c2410_init_clocks(int xtal) -{ - s3c24xx_register_baseclocks(xtal); - s3c2410_setup_clocks(); - s3c2410_baseclk_add(); - s3c24xx_register_clock(&s3c2410_armclk); - clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup)); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } struct bus_type s3c2410_subsys = { diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 657cbaca80ac..d49f52fbc842 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -173,49 +173,6 @@ void __init s3c2412_map_io(void) void __init_or_cpufreq s3c2412_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2); - - clk_mpll.rate = fclk; - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); - hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c2412_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_register_baseclocks(xtal); - s3c2412_setup_clocks(); - s3c2412_baseclk_add(); } /* need to register the subsystem before we actually register the device, and diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index 2c8adc028538..fb9da2b603a2 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -53,117 +53,6 @@ #include "common.h" -/* S3C2442 extended clock support */ - -static unsigned long s3c2442_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - - if (div == 3) - return parent_rate / 3; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div /= 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2442_camif_upll_round(clk, rate); - - camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3; - - if (rate == parent_rate) { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL; - } else if ((parent_rate / rate) == 3) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3; - } else { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK; - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -/* Extra S3C2442 clocks */ - -static struct clk s3c2442_clk_cam = { - .name = "camif", - .id = -1, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2442_clk_cam_upll = { - .name = "camif-upll", - .id = -1, - .ops = &(struct clk_ops) { - .set_rate = s3c2442_camif_upll_setrate, - .round_rate = s3c2442_camif_upll_round, - }, -}; - -static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2442: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2442_clk_cam.parent = clock_h; - s3c2442_clk_cam_upll.parent = clock_upll; - - s3c24xx_register_clock(&s3c2442_clk_cam); - s3c24xx_register_clock(&s3c2442_clk_cam_upll); - - clk_disable(&s3c2442_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c2442_clk_add, -}; - -static __init int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); - - static struct device s3c2442_dev = { .bus = &s3c2442_subsys, }; diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index fe30ebb234d2..4a64bcc9eb51 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -46,6 +46,7 @@ #include <plat/nand-core.h> #include <plat/watchdog-reset.h> +#include "common.h" #include "regs-dsc.h" static struct map_desc s3c244x_iodesc[] __initdata = { @@ -74,67 +75,11 @@ void __init s3c244x_map_io(void) s3c_nand_setname("s3c2440-nand"); s3c_device_ts.name = "s3c2440-ts"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; + s3c2410_device_dclk.name = "s3c2440-dclk"; } void __init_or_cpufreq s3c244x_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long clkdiv; - unsigned long camdiv; - unsigned long xtal; - unsigned long hclk, fclk, pclk; - int hdiv = 1; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - /* work out clock scalings */ - - switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) { - case S3C2440_CLKDIVN_HDIVN_1: - hdiv = 1; - break; - - case S3C2440_CLKDIVN_HDIVN_2: - hdiv = 2; - break; - - case S3C2440_CLKDIVN_HDIVN_4_8: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4; - break; - - case S3C2440_CLKDIVN_HDIVN_3_6: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3; - break; - } - - hclk = fclk / hdiv; - pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brief summary of clocks, etc */ - - printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c244x_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them, and to add new ones after the initialisation - */ - - s3c24xx_register_baseclocks(xtal); - s3c244x_setup_clocks(); - s3c2410_baseclk_add(); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } /* Since the S3C2442 and S3C2440 share items, put both subsystems here */ diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 7231c8e4975e..72d4178ad23b 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -119,6 +119,7 @@ struct s3c_plltab { struct s3c_cpufreq_config { struct s3c_freq freq; struct s3c_freq max; + struct clk *mpll; struct cpufreq_frequency_table pll; struct s3c_clkdivs divs; struct s3c_cpufreq_info *info; /* for core, not drivers */ diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 8eb4799237f0..2cb62f87e068 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -8,4 +8,8 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o +obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o +obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o +obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o +obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c index 81e6d2f49aa0..7fb0a28e65d5 100644 --- a/drivers/clk/samsung/clk-pll.c +++ b/drivers/clk/samsung/clk-pll.c @@ -11,6 +11,7 @@ #include <linux/errno.h> #include <linux/hrtimer.h> +#include <linux/delay.h> #include "clk.h" #include "clk-pll.h" @@ -59,6 +60,72 @@ static long samsung_pll_round_rate(struct clk_hw *hw, } /* + * PLL2126 Clock Type + */ + +#define PLL2126_MDIV_MASK (0xff) +#define PLL2126_PDIV_MASK (0x3f) +#define PLL2126_SDIV_MASK (0x3) +#define PLL2126_MDIV_SHIFT (16) +#define PLL2126_PDIV_SHIFT (8) +#define PLL2126_SDIV_SHIFT (0) + +static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK; + pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK; + sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK; + + fvco *= (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll2126_clk_ops = { + .recalc_rate = samsung_pll2126_recalc_rate, +}; + +/* + * PLL3000 Clock Type + */ + +#define PLL3000_MDIV_MASK (0xff) +#define PLL3000_PDIV_MASK (0x3) +#define PLL3000_SDIV_MASK (0x3) +#define PLL3000_MDIV_SHIFT (16) +#define PLL3000_PDIV_SHIFT (8) +#define PLL3000_SDIV_SHIFT (0) + +static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK; + pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK; + sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK; + + fvco *= (2 * (mdiv + 8)); + do_div(fvco, pdiv << sdiv); + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll3000_clk_ops = { + .recalc_rate = samsung_pll3000_recalc_rate, +}; + +/* * PLL35xx Clock Type */ /* Maximum lock time can be 270 * PDIV cycles */ @@ -564,7 +631,9 @@ static const struct clk_ops samsung_pll46xx_clk_min_ops = { #define PLL6552_PDIV_MASK 0x3f #define PLL6552_SDIV_MASK 0x7 #define PLL6552_MDIV_SHIFT 16 +#define PLL6552_MDIV_SHIFT_2416 14 #define PLL6552_PDIV_SHIFT 8 +#define PLL6552_PDIV_SHIFT_2416 5 #define PLL6552_SDIV_SHIFT 0 static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw, @@ -575,8 +644,13 @@ static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw, u64 fvco = parent_rate; pll_con = __raw_readl(pll->con_reg); - mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK; - pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK; + if (pll->type == pll_6552_s3c2416) { + mdiv = (pll_con >> PLL6552_MDIV_SHIFT_2416) & PLL6552_MDIV_MASK; + pdiv = (pll_con >> PLL6552_PDIV_SHIFT_2416) & PLL6552_PDIV_MASK; + } else { + mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK; + pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK; + } sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK; fvco *= mdiv; @@ -628,6 +702,169 @@ static const struct clk_ops samsung_pll6553_clk_ops = { }; /* + * PLL Clock Type of S3C24XX before S3C2443 + */ + +#define PLLS3C2410_MDIV_MASK (0xff) +#define PLLS3C2410_PDIV_MASK (0x1f) +#define PLLS3C2410_SDIV_MASK (0x3) +#define PLLS3C2410_MDIV_SHIFT (12) +#define PLLS3C2410_PDIV_SHIFT (4) +#define PLLS3C2410_SDIV_SHIFT (0) + +#define PLLS3C2410_ENABLE_REG_OFFSET 0x10 + +static unsigned long samsung_s3c2410_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK; + pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK; + sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK; + + fvco *= (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +static unsigned long samsung_s3c2440_mpll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_con, mdiv, pdiv, sdiv; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK; + pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK; + sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK; + + fvco *= (2 * (mdiv + 8)); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +static int samsung_s3c2410_pll_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + const struct samsung_pll_rate_table *rate; + u32 tmp; + + /* Get required rate settings from table */ + rate = samsung_get_pll_settings(pll, drate); + if (!rate) { + pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, + drate, __clk_get_name(hw->clk)); + return -EINVAL; + } + + tmp = __raw_readl(pll->con_reg); + + /* Change PLL PMS values */ + tmp &= ~((PLLS3C2410_MDIV_MASK << PLLS3C2410_MDIV_SHIFT) | + (PLLS3C2410_PDIV_MASK << PLLS3C2410_PDIV_SHIFT) | + (PLLS3C2410_SDIV_MASK << PLLS3C2410_SDIV_SHIFT)); + tmp |= (rate->mdiv << PLLS3C2410_MDIV_SHIFT) | + (rate->pdiv << PLLS3C2410_PDIV_SHIFT) | + (rate->sdiv << PLLS3C2410_SDIV_SHIFT); + __raw_writel(tmp, pll->con_reg); + + /* Time to settle according to the manual */ + udelay(300); + + return 0; +} + +static int samsung_s3c2410_pll_enable(struct clk_hw *hw, int bit, bool enable) +{ + struct samsung_clk_pll *pll = to_clk_pll(hw); + u32 pll_en = __raw_readl(pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET); + u32 pll_en_orig = pll_en; + + if (enable) + pll_en &= ~BIT(bit); + else + pll_en |= BIT(bit); + + __raw_writel(pll_en, pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET); + + /* if we started the UPLL, then allow to settle */ + if (enable && (pll_en_orig & BIT(bit))) + udelay(300); + + return 0; +} + +static int samsung_s3c2410_mpll_enable(struct clk_hw *hw) +{ + return samsung_s3c2410_pll_enable(hw, 5, true); +} + +static void samsung_s3c2410_mpll_disable(struct clk_hw *hw) +{ + samsung_s3c2410_pll_enable(hw, 5, false); +} + +static int samsung_s3c2410_upll_enable(struct clk_hw *hw) +{ + return samsung_s3c2410_pll_enable(hw, 7, true); +} + +static void samsung_s3c2410_upll_disable(struct clk_hw *hw) +{ + samsung_s3c2410_pll_enable(hw, 7, false); +} + +static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, +}; + +static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_upll_enable, + .disable = samsung_s3c2410_upll_disable, +}; + +static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = { + .recalc_rate = samsung_s3c2440_mpll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, +}; + +static const struct clk_ops samsung_s3c2410_mpll_clk_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +static const struct clk_ops samsung_s3c2410_upll_clk_ops = { + .recalc_rate = samsung_s3c2410_pll_recalc_rate, + .enable = samsung_s3c2410_upll_enable, + .disable = samsung_s3c2410_upll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +static const struct clk_ops samsung_s3c2440_mpll_clk_ops = { + .recalc_rate = samsung_s3c2440_mpll_recalc_rate, + .enable = samsung_s3c2410_mpll_enable, + .disable = samsung_s3c2410_mpll_disable, + .round_rate = samsung_pll_round_rate, + .set_rate = samsung_s3c2410_pll_set_rate, +}; + +/* * PLL2550x Clock Type */ @@ -746,6 +983,12 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, } switch (pll_clk->type) { + case pll_2126: + init.ops = &samsung_pll2126_clk_ops; + break; + case pll_3000: + init.ops = &samsung_pll3000_clk_ops; + break; /* clk_ops for 35xx and 2550 are similar */ case pll_35xx: case pll_2550: @@ -773,6 +1016,7 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, init.ops = &samsung_pll36xx_clk_ops; break; case pll_6552: + case pll_6552_s3c2416: init.ops = &samsung_pll6552_clk_ops; break; case pll_6553: @@ -786,6 +1030,24 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk, else init.ops = &samsung_pll46xx_clk_ops; break; + case pll_s3c2410_mpll: + if (!pll->rate_table) + init.ops = &samsung_s3c2410_mpll_clk_min_ops; + else + init.ops = &samsung_s3c2410_mpll_clk_ops; + break; + case pll_s3c2410_upll: + if (!pll->rate_table) + init.ops = &samsung_s3c2410_upll_clk_min_ops; + else + init.ops = &samsung_s3c2410_upll_clk_ops; + break; + case pll_s3c2440_mpll: + if (!pll->rate_table) + init.ops = &samsung_s3c2440_mpll_clk_min_ops; + else + init.ops = &samsung_s3c2440_mpll_clk_ops; + break; default: pr_warn("%s: Unknown pll type for pll clk %s\n", __func__, pll_clk->name); diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h index 6c39030080fb..6428bcc6df6f 100644 --- a/drivers/clk/samsung/clk-pll.h +++ b/drivers/clk/samsung/clk-pll.h @@ -13,6 +13,8 @@ #define __SAMSUNG_CLK_PLL_H enum samsung_pll_type { + pll_2126, + pll_3000, pll_35xx, pll_36xx, pll_2550, @@ -24,7 +26,11 @@ enum samsung_pll_type { pll_4650, pll_4650c, pll_6552, + pll_6552_s3c2416, pll_6553, + pll_s3c2410_mpll, + pll_s3c2410_upll, + pll_s3c2440_mpll, }; #define PLL_35XX_RATE(_rate, _m, _p, _s) \ diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c new file mode 100644 index 000000000000..8d8dff005c10 --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2410-dclk.c @@ -0,0 +1,440 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for s3c24xx external clock output. + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include "clk.h" + +/* legacy access to misccr, until dt conversion is finished */ +#include <mach/hardware.h> +#include <mach/regs-gpio.h> + +#define MUX_DCLK0 0 +#define MUX_DCLK1 1 +#define DIV_DCLK0 2 +#define DIV_DCLK1 3 +#define GATE_DCLK0 4 +#define GATE_DCLK1 5 +#define MUX_CLKOUT0 6 +#define MUX_CLKOUT1 7 +#define DCLK_MAX_CLKS (MUX_CLKOUT1 + 1) + +enum supported_socs { + S3C2410, + S3C2412, + S3C2440, + S3C2443, +}; + +struct s3c24xx_dclk_drv_data { + const char **clkout0_parent_names; + int clkout0_num_parents; + const char **clkout1_parent_names; + int clkout1_num_parents; + const char **mux_parent_names; + int mux_num_parents; +}; + +/* + * Clock for output-parent selection in misccr + */ + +struct s3c24xx_clkout { + struct clk_hw hw; + u32 mask; + u8 shift; +}; + +#define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw) + +static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw) +{ + struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw); + int num_parents = __clk_get_num_parents(hw->clk); + u32 val; + + val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift; + val >>= clkout->shift; + val &= clkout->mask; + + if (val >= num_parents) + return -EINVAL; + + return val; +} + +static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index) +{ + struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw); + int ret = 0; + + s3c2410_modify_misccr((clkout->mask << clkout->shift), + (index << clkout->shift)); + + return ret; +} + +const struct clk_ops s3c24xx_clkout_ops = { + .get_parent = s3c24xx_clkout_get_parent, + .set_parent = s3c24xx_clkout_set_parent, + .determine_rate = __clk_mux_determine_rate, +}; + +struct clk *s3c24xx_register_clkout(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, + u8 shift, u32 mask) +{ + struct s3c24xx_clkout *clkout; + struct clk *clk; + struct clk_init_data init; + + /* allocate the clkout */ + clkout = kzalloc(sizeof(*clkout), GFP_KERNEL); + if (!clkout) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &s3c24xx_clkout_ops; + init.flags = CLK_IS_BASIC; + init.parent_names = parent_names; + init.num_parents = num_parents; + + clkout->shift = shift; + clkout->mask = mask; + clkout->hw.init = &init; + + clk = clk_register(dev, &clkout->hw); + + return clk; +} + +/* + * dclk and clkout init + */ + +struct s3c24xx_dclk { + struct device *dev; + void __iomem *base; + struct clk_onecell_data clk_data; + struct notifier_block dclk0_div_change_nb; + struct notifier_block dclk1_div_change_nb; + spinlock_t dclk_lock; + unsigned long reg_save; +}; + +#define to_s3c24xx_dclk0(x) \ + container_of(x, struct s3c24xx_dclk, dclk0_div_change_nb) + +#define to_s3c24xx_dclk1(x) \ + container_of(x, struct s3c24xx_dclk, dclk1_div_change_nb) + +PNAME(dclk_s3c2410_p) = { "pclk", "uclk" }; +PNAME(clkout0_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk", + "gate_dclk0" }; +PNAME(clkout1_s3c2410_p) = { "mpll", "upll", "fclk", "hclk", "pclk", + "gate_dclk1" }; + +PNAME(clkout0_s3c2412_p) = { "mpll", "upll", "rtc_clkout", + "hclk", "pclk", "gate_dclk0" }; +PNAME(clkout1_s3c2412_p) = { "xti", "upll", "fclk", "hclk", "pclk", + "gate_dclk1" }; + +PNAME(clkout0_s3c2440_p) = { "xti", "upll", "fclk", "hclk", "pclk", + "gate_dclk0" }; +PNAME(clkout1_s3c2440_p) = { "mpll", "upll", "rtc_clkout", + "hclk", "pclk", "gate_dclk1" }; + +PNAME(dclk_s3c2443_p) = { "pclk", "epll" }; +PNAME(clkout0_s3c2443_p) = { "xti", "epll", "armclk", "hclk", "pclk", + "gate_dclk0" }; +PNAME(clkout1_s3c2443_p) = { "dummy", "epll", "rtc_clkout", + "hclk", "pclk", "gate_dclk1" }; + +#define DCLKCON_DCLK_DIV_MASK 0xf +#define DCLKCON_DCLK0_DIV_SHIFT 4 +#define DCLKCON_DCLK0_CMP_SHIFT 8 +#define DCLKCON_DCLK1_DIV_SHIFT 20 +#define DCLKCON_DCLK1_CMP_SHIFT 24 + +static void s3c24xx_dclk_update_cmp(struct s3c24xx_dclk *s3c24xx_dclk, + int div_shift, int cmp_shift) +{ + unsigned long flags = 0; + u32 dclk_con, div, cmp; + + spin_lock_irqsave(&s3c24xx_dclk->dclk_lock, flags); + + dclk_con = readl_relaxed(s3c24xx_dclk->base); + + div = ((dclk_con >> div_shift) & DCLKCON_DCLK_DIV_MASK) + 1; + cmp = ((div + 1) / 2) - 1; + + dclk_con &= ~(DCLKCON_DCLK_DIV_MASK << cmp_shift); + dclk_con |= (cmp << cmp_shift); + + writel_relaxed(dclk_con, s3c24xx_dclk->base); + + spin_unlock_irqrestore(&s3c24xx_dclk->dclk_lock, flags); +} + +static int s3c24xx_dclk0_div_notify(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk0(nb); + + if (event == POST_RATE_CHANGE) { + s3c24xx_dclk_update_cmp(s3c24xx_dclk, + DCLKCON_DCLK0_DIV_SHIFT, DCLKCON_DCLK0_CMP_SHIFT); + } + + return NOTIFY_DONE; +} + +static int s3c24xx_dclk1_div_notify(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct s3c24xx_dclk *s3c24xx_dclk = to_s3c24xx_dclk1(nb); + + if (event == POST_RATE_CHANGE) { + s3c24xx_dclk_update_cmp(s3c24xx_dclk, + DCLKCON_DCLK1_DIV_SHIFT, DCLKCON_DCLK1_CMP_SHIFT); + } + + return NOTIFY_DONE; +} + +#ifdef CONFIG_PM_SLEEP +static int s3c24xx_dclk_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev); + + s3c24xx_dclk->reg_save = readl_relaxed(s3c24xx_dclk->base); + return 0; +} + +static int s3c24xx_dclk_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev); + + writel_relaxed(s3c24xx_dclk->reg_save, s3c24xx_dclk->base); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(s3c24xx_dclk_pm_ops, + s3c24xx_dclk_suspend, s3c24xx_dclk_resume); + +static int s3c24xx_dclk_probe(struct platform_device *pdev) +{ + struct s3c24xx_dclk *s3c24xx_dclk; + struct resource *mem; + struct clk **clk_table; + struct s3c24xx_dclk_drv_data *dclk_variant; + int ret, i; + + s3c24xx_dclk = devm_kzalloc(&pdev->dev, sizeof(*s3c24xx_dclk), + GFP_KERNEL); + if (!s3c24xx_dclk) + return -ENOMEM; + + s3c24xx_dclk->dev = &pdev->dev; + platform_set_drvdata(pdev, s3c24xx_dclk); + spin_lock_init(&s3c24xx_dclk->dclk_lock); + + clk_table = devm_kzalloc(&pdev->dev, + sizeof(struct clk *) * DCLK_MAX_CLKS, + GFP_KERNEL); + if (!clk_table) + return -ENOMEM; + + s3c24xx_dclk->clk_data.clks = clk_table; + s3c24xx_dclk->clk_data.clk_num = DCLK_MAX_CLKS; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + s3c24xx_dclk->base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(s3c24xx_dclk->base)) + return PTR_ERR(s3c24xx_dclk->base); + + dclk_variant = (struct s3c24xx_dclk_drv_data *) + platform_get_device_id(pdev)->driver_data; + + + clk_table[MUX_DCLK0] = clk_register_mux(&pdev->dev, "mux_dclk0", + dclk_variant->mux_parent_names, + dclk_variant->mux_num_parents, 0, + s3c24xx_dclk->base, 1, 1, 0, + &s3c24xx_dclk->dclk_lock); + clk_table[MUX_DCLK1] = clk_register_mux(&pdev->dev, "mux_dclk1", + dclk_variant->mux_parent_names, + dclk_variant->mux_num_parents, 0, + s3c24xx_dclk->base, 17, 1, 0, + &s3c24xx_dclk->dclk_lock); + + clk_table[DIV_DCLK0] = clk_register_divider(&pdev->dev, "div_dclk0", + "mux_dclk0", 0, s3c24xx_dclk->base, + 4, 4, 0, &s3c24xx_dclk->dclk_lock); + clk_table[DIV_DCLK1] = clk_register_divider(&pdev->dev, "div_dclk1", + "mux_dclk1", 0, s3c24xx_dclk->base, + 20, 4, 0, &s3c24xx_dclk->dclk_lock); + + clk_table[GATE_DCLK0] = clk_register_gate(&pdev->dev, "gate_dclk0", + "div_dclk0", CLK_SET_RATE_PARENT, + s3c24xx_dclk->base, 0, 0, + &s3c24xx_dclk->dclk_lock); + clk_table[GATE_DCLK1] = clk_register_gate(&pdev->dev, "gate_dclk1", + "div_dclk1", CLK_SET_RATE_PARENT, + s3c24xx_dclk->base, 16, 0, + &s3c24xx_dclk->dclk_lock); + + clk_table[MUX_CLKOUT0] = s3c24xx_register_clkout(&pdev->dev, + "clkout0", dclk_variant->clkout0_parent_names, + dclk_variant->clkout0_num_parents, 4, 7); + clk_table[MUX_CLKOUT1] = s3c24xx_register_clkout(&pdev->dev, + "clkout1", dclk_variant->clkout1_parent_names, + dclk_variant->clkout1_num_parents, 8, 7); + + for (i = 0; i < DCLK_MAX_CLKS; i++) + if (IS_ERR(clk_table[i])) { + dev_err(&pdev->dev, "clock %d failed to register\n", i); + ret = PTR_ERR(clk_table[i]); + goto err_clk_register; + } + + ret = clk_register_clkdev(clk_table[MUX_DCLK0], "dclk0", NULL); + if (!ret) + ret = clk_register_clkdev(clk_table[MUX_DCLK1], "dclk1", NULL); + if (!ret) + ret = clk_register_clkdev(clk_table[MUX_CLKOUT0], + "clkout0", NULL); + if (!ret) + ret = clk_register_clkdev(clk_table[MUX_CLKOUT1], + "clkout1", NULL); + if (ret) { + dev_err(&pdev->dev, "failed to register aliases, %d\n", ret); + goto err_clk_register; + } + + s3c24xx_dclk->dclk0_div_change_nb.notifier_call = + s3c24xx_dclk0_div_notify; + + s3c24xx_dclk->dclk1_div_change_nb.notifier_call = + s3c24xx_dclk1_div_notify; + + ret = clk_notifier_register(clk_table[DIV_DCLK0], + &s3c24xx_dclk->dclk0_div_change_nb); + if (ret) + goto err_clk_register; + + ret = clk_notifier_register(clk_table[DIV_DCLK1], + &s3c24xx_dclk->dclk1_div_change_nb); + if (ret) + goto err_dclk_notify; + + return 0; + +err_dclk_notify: + clk_notifier_unregister(clk_table[DIV_DCLK0], + &s3c24xx_dclk->dclk0_div_change_nb); +err_clk_register: + for (i = 0; i < DCLK_MAX_CLKS; i++) + if (clk_table[i] && !IS_ERR(clk_table[i])) + clk_unregister(clk_table[i]); + + return ret; +} + +static int s3c24xx_dclk_remove(struct platform_device *pdev) +{ + struct s3c24xx_dclk *s3c24xx_dclk = platform_get_drvdata(pdev); + struct clk **clk_table = s3c24xx_dclk->clk_data.clks; + int i; + + clk_notifier_unregister(clk_table[DIV_DCLK1], + &s3c24xx_dclk->dclk1_div_change_nb); + clk_notifier_unregister(clk_table[DIV_DCLK0], + &s3c24xx_dclk->dclk0_div_change_nb); + + for (i = 0; i < DCLK_MAX_CLKS; i++) + clk_unregister(clk_table[i]); + + return 0; +} + +static struct s3c24xx_dclk_drv_data dclk_variants[] = { + [S3C2410] = { + .clkout0_parent_names = clkout0_s3c2410_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2410_p), + .clkout1_parent_names = clkout1_s3c2410_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2410_p), + .mux_parent_names = dclk_s3c2410_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p), + }, + [S3C2412] = { + .clkout0_parent_names = clkout0_s3c2412_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2412_p), + .clkout1_parent_names = clkout1_s3c2412_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2412_p), + .mux_parent_names = dclk_s3c2410_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p), + }, + [S3C2440] = { + .clkout0_parent_names = clkout0_s3c2440_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2440_p), + .clkout1_parent_names = clkout1_s3c2440_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2440_p), + .mux_parent_names = dclk_s3c2410_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2410_p), + }, + [S3C2443] = { + .clkout0_parent_names = clkout0_s3c2443_p, + .clkout0_num_parents = ARRAY_SIZE(clkout0_s3c2443_p), + .clkout1_parent_names = clkout1_s3c2443_p, + .clkout1_num_parents = ARRAY_SIZE(clkout1_s3c2443_p), + .mux_parent_names = dclk_s3c2443_p, + .mux_num_parents = ARRAY_SIZE(dclk_s3c2443_p), + }, +}; + +static struct platform_device_id s3c24xx_dclk_driver_ids[] = { + { + .name = "s3c2410-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2410], + }, { + .name = "s3c2412-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2412], + }, { + .name = "s3c2440-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2440], + }, { + .name = "s3c2443-dclk", + .driver_data = (kernel_ulong_t)&dclk_variants[S3C2443], + }, + { } +}; + +MODULE_DEVICE_TABLE(platform, s3c24xx_dclk_driver_ids); + +static struct platform_driver s3c24xx_dclk_driver = { + .driver = { + .name = "s3c24xx-dclk", + .owner = THIS_MODULE, + .pm = &s3c24xx_dclk_pm_ops, + }, + .probe = s3c24xx_dclk_probe, + .remove = s3c24xx_dclk_remove, + .id_table = s3c24xx_dclk_driver_ids, +}; +module_platform_driver(s3c24xx_dclk_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); +MODULE_DESCRIPTION("Driver for the S3C24XX external clock outputs"); diff --git a/drivers/clk/samsung/clk-s3c2410.c b/drivers/clk/samsung/clk-s3c2410.c new file mode 100644 index 000000000000..7b4182186a30 --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2410.c @@ -0,0 +1,477 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for S3C2410 and following SoCs. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clock/s3c2410.h> + +#include "clk.h" +#include "clk-pll.h" + +#define LOCKTIME 0x00 +#define MPLLCON 0x04 +#define UPLLCON 0x08 +#define CLKCON 0x0c +#define CLKSLOW 0x10 +#define CLKDIVN 0x14 +#define CAMDIVN 0x18 + +/* the soc types */ +enum supported_socs { + S3C2410, + S3C2440, + S3C2442, +}; + +/* list of PLLs to be registered */ +enum s3c2410_plls { + mpll, upll, +}; + +static void __iomem *reg_base; + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *s3c2410_save; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static unsigned long s3c2410_clk_regs[] __initdata = { + LOCKTIME, + MPLLCON, + UPLLCON, + CLKCON, + CLKSLOW, + CLKDIVN, + CAMDIVN, +}; + +static int s3c2410_clk_suspend(void) +{ + samsung_clk_save(reg_base, s3c2410_save, + ARRAY_SIZE(s3c2410_clk_regs)); + + return 0; +} + +static void s3c2410_clk_resume(void) +{ + samsung_clk_restore(reg_base, s3c2410_save, + ARRAY_SIZE(s3c2410_clk_regs)); +} + +static struct syscore_ops s3c2410_clk_syscore_ops = { + .suspend = s3c2410_clk_suspend, + .resume = s3c2410_clk_resume, +}; + +static void s3c2410_clk_sleep_init(void) +{ + s3c2410_save = samsung_clk_alloc_reg_dump(s3c2410_clk_regs, + ARRAY_SIZE(s3c2410_clk_regs)); + if (!s3c2410_save) { + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; + } + + register_syscore_ops(&s3c2410_clk_syscore_ops); + return; +} +#else +static void s3c2410_clk_sleep_init(void) {} +#endif + +PNAME(fclk_p) = { "mpll", "div_slow" }; + +struct samsung_mux_clock s3c2410_common_muxes[] __initdata = { + MUX(FCLK, "fclk", fclk_p, CLKSLOW, 4, 1), +}; + +static struct clk_div_table divslow_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 6 }, + { .val = 4, .div = 8 }, + { .val = 5, .div = 10 }, + { .val = 6, .div = 12 }, + { .val = 7, .div = 14 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2410_common_dividers[] __initdata = { + DIV_T(0, "div_slow", "xti", CLKSLOW, 0, 3, divslow_d), + DIV(PCLK, "pclk", "hclk", CLKDIVN, 0, 1), +}; + +struct samsung_gate_clock s3c2410_common_gates[] __initdata = { + GATE(PCLK_SPI, "spi", "pclk", CLKCON, 18, 0, 0), + GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 17, 0, 0), + GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 16, 0, 0), + GATE(PCLK_ADC, "adc", "pclk", CLKCON, 15, 0, 0), + GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 14, 0, 0), + GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 13, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 12, 0, 0), + GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 11, 0, 0), + GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 10, 0, 0), + GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 9, 0, 0), + GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 8, 0, 0), + GATE(HCLK_USBD, "usb-device", "hclk", CLKCON, 7, 0, 0), + GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0), + GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0), + GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0), +}; + +/* should be added _after_ the soc-specific clocks are created */ +struct samsung_clock_alias s3c2410_common_aliases[] __initdata = { + ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"), + ALIAS(PCLK_ADC, NULL, "adc"), + ALIAS(PCLK_RTC, NULL, "rtc"), + ALIAS(PCLK_PWM, NULL, "timers"), + ALIAS(HCLK_LCD, NULL, "lcd"), + ALIAS(HCLK_USBD, NULL, "usb-device"), + ALIAS(HCLK_USBH, NULL, "usb-host"), + ALIAS(UCLK, NULL, "usb-bus-host"), + ALIAS(UCLK, NULL, "usb-bus-gadget"), + ALIAS(ARMCLK, NULL, "armclk"), + ALIAS(UCLK, NULL, "uclk"), + ALIAS(HCLK, NULL, "hclk"), + ALIAS(MPLL, NULL, "mpll"), + ALIAS(FCLK, NULL, "fclk"), +}; + +/* S3C2410 specific clocks */ + +static struct samsung_pll_rate_table pll_s3c2410_12mhz_tbl[] __initdata = { + /* sorted in descending order */ + /* 2410A extras */ + PLL_35XX_RATE(270000000, 127, 1, 1), + PLL_35XX_RATE(268000000, 126, 1, 1), + PLL_35XX_RATE(266000000, 125, 1, 1), + PLL_35XX_RATE(226000000, 105, 1, 1), + PLL_35XX_RATE(210000000, 132, 2, 1), + /* 2410 common */ + PLL_35XX_RATE(203000000, 161, 3, 1), + PLL_35XX_RATE(192000000, 88, 1, 1), + PLL_35XX_RATE(186000000, 85, 1, 1), + PLL_35XX_RATE(180000000, 82, 1, 1), + PLL_35XX_RATE(170000000, 77, 1, 1), + PLL_35XX_RATE(158000000, 71, 1, 1), + PLL_35XX_RATE(152000000, 68, 1, 1), + PLL_35XX_RATE(147000000, 90, 2, 1), + PLL_35XX_RATE(135000000, 82, 2, 1), + PLL_35XX_RATE(124000000, 116, 1, 2), + PLL_35XX_RATE(118000000, 150, 2, 2), + PLL_35XX_RATE(113000000, 105, 1, 2), + PLL_35XX_RATE(101000000, 127, 2, 2), + PLL_35XX_RATE(90000000, 112, 2, 2), + PLL_35XX_RATE(85000000, 105, 2, 2), + PLL_35XX_RATE(79000000, 71, 1, 2), + PLL_35XX_RATE(68000000, 82, 2, 2), + PLL_35XX_RATE(56000000, 142, 2, 3), + PLL_35XX_RATE(48000000, 120, 2, 3), + PLL_35XX_RATE(51000000, 161, 3, 3), + PLL_35XX_RATE(45000000, 82, 1, 3), + PLL_35XX_RATE(34000000, 82, 2, 3), + { /* sentinel */ }, +}; + +static struct samsung_pll_clock s3c2410_plls[] __initdata = { + [mpll] = PLL(pll_s3c2410_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti", + LOCKTIME, UPLLCON, NULL), +}; + +struct samsung_div_clock s3c2410_dividers[] __initdata = { + DIV(HCLK, "hclk", "mpll", CLKDIVN, 1, 1), +}; + +struct samsung_fixed_factor_clock s3c2410_ffactor[] __initdata = { + /* + * armclk is directly supplied by the fclk, without + * switching possibility like on the s3c244x below. + */ + FFACTOR(ARMCLK, "armclk", "fclk", 1, 1, 0), + + /* uclk is fed from the unmodified upll */ + FFACTOR(UCLK, "uclk", "upll", 1, 1, 0), +}; + +struct samsung_clock_alias s3c2410_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2410-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2410-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2410-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2410-uart.0", "clk_uart_baud0"), + ALIAS(PCLK_UART1, "s3c2410-uart.1", "clk_uart_baud0"), + ALIAS(PCLK_UART2, "s3c2410-uart.2", "clk_uart_baud0"), + ALIAS(UCLK, NULL, "clk_uart_baud1"), +}; + +/* S3C244x specific clocks */ + +static struct samsung_pll_rate_table pll_s3c244x_12mhz_tbl[] __initdata = { + /* sorted in descending order */ + PLL_35XX_RATE(400000000, 0x5c, 1, 1), + PLL_35XX_RATE(390000000, 0x7a, 2, 1), + PLL_35XX_RATE(380000000, 0x57, 1, 1), + PLL_35XX_RATE(370000000, 0xb1, 4, 1), + PLL_35XX_RATE(360000000, 0x70, 2, 1), + PLL_35XX_RATE(350000000, 0xa7, 4, 1), + PLL_35XX_RATE(340000000, 0x4d, 1, 1), + PLL_35XX_RATE(330000000, 0x66, 2, 1), + PLL_35XX_RATE(320000000, 0x98, 4, 1), + PLL_35XX_RATE(310000000, 0x93, 4, 1), + PLL_35XX_RATE(300000000, 0x75, 3, 1), + PLL_35XX_RATE(240000000, 0x70, 1, 2), + PLL_35XX_RATE(230000000, 0x6b, 1, 2), + PLL_35XX_RATE(220000000, 0x66, 1, 2), + PLL_35XX_RATE(210000000, 0x84, 2, 2), + PLL_35XX_RATE(200000000, 0x5c, 1, 2), + PLL_35XX_RATE(190000000, 0x57, 1, 2), + PLL_35XX_RATE(180000000, 0x70, 2, 2), + PLL_35XX_RATE(170000000, 0x4d, 1, 2), + PLL_35XX_RATE(160000000, 0x98, 4, 2), + PLL_35XX_RATE(150000000, 0x75, 3, 2), + PLL_35XX_RATE(120000000, 0x70, 1, 3), + PLL_35XX_RATE(110000000, 0x66, 1, 3), + PLL_35XX_RATE(100000000, 0x5c, 1, 3), + PLL_35XX_RATE(90000000, 0x70, 2, 3), + PLL_35XX_RATE(80000000, 0x98, 4, 3), + PLL_35XX_RATE(75000000, 0x75, 3, 3), + { /* sentinel */ }, +}; + +static struct samsung_pll_clock s3c244x_common_plls[] __initdata = { + [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti", + LOCKTIME, UPLLCON, NULL), +}; + +PNAME(hclk_p) = { "fclk", "div_hclk_2", "div_hclk_4", "div_hclk_3" }; +PNAME(armclk_p) = { "fclk", "hclk" }; + +struct samsung_mux_clock s3c244x_common_muxes[] __initdata = { + MUX(HCLK, "hclk", hclk_p, CLKDIVN, 1, 2), + MUX(ARMCLK, "armclk", armclk_p, CAMDIVN, 12, 1), +}; + +struct samsung_fixed_factor_clock s3c244x_common_ffactor[] __initdata = { + FFACTOR(0, "div_hclk_2", "fclk", 1, 2, 0), + FFACTOR(0, "ff_cam", "div_cam", 2, 1, CLK_SET_RATE_PARENT), +}; + +static struct clk_div_table div_hclk_4_d[] = { + { .val = 0, .div = 4 }, + { .val = 1, .div = 8 }, + { /* sentinel */ }, +}; + +static struct clk_div_table div_hclk_3_d[] = { + { .val = 0, .div = 3 }, + { .val = 1, .div = 6 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c244x_common_dividers[] __initdata = { + DIV(UCLK, "uclk", "upll", CLKDIVN, 3, 1), + DIV(0, "div_hclk", "fclk", CLKDIVN, 1, 1), + DIV_T(0, "div_hclk_4", "fclk", CAMDIVN, 9, 1, div_hclk_4_d), + DIV_T(0, "div_hclk_3", "fclk", CAMDIVN, 8, 1, div_hclk_3_d), + DIV(0, "div_cam", "upll", CAMDIVN, 0, 3), +}; + +struct samsung_gate_clock s3c244x_common_gates[] __initdata = { + GATE(HCLK_CAM, "cam", "hclk", CLKCON, 19, 0, 0), +}; + +struct samsung_clock_alias s3c244x_common_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"), + ALIAS(HCLK_CAM, NULL, "camif"), + ALIAS(CAMIF, NULL, "camif-upll"), +}; + +/* S3C2440 specific clocks */ + +PNAME(s3c2440_camif_p) = { "upll", "ff_cam" }; + +struct samsung_mux_clock s3c2440_muxes[] __initdata = { + MUX(CAMIF, "camif", s3c2440_camif_p, CAMDIVN, 4, 1), +}; + +struct samsung_gate_clock s3c2440_gates[] __initdata = { + GATE(PCLK_AC97, "ac97", "pclk", CLKCON, 20, 0, 0), +}; + +/* S3C2442 specific clocks */ + +struct samsung_fixed_factor_clock s3c2442_ffactor[] __initdata = { + FFACTOR(0, "upll_3", "upll", 1, 3, 0), +}; + +PNAME(s3c2442_camif_p) = { "upll", "ff_cam", "upll", "upll_3" }; + +struct samsung_mux_clock s3c2442_muxes[] __initdata = { + MUX(CAMIF, "camif", s3c2442_camif_p, CAMDIVN, 4, 2), +}; + +/* + * fixed rate clocks generated outside the soc + * Only necessary until the devicetree-move is complete + */ +#define XTI 1 +struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = { + FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0), +}; + +static void __init s3c2410_common_clk_register_fixed_ext(unsigned long xti_f) +{ + struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal"); + + s3c2410_common_frate_clks[0].fixed_rate = xti_f; + samsung_clk_register_fixed_rate(s3c2410_common_frate_clks, + ARRAY_SIZE(s3c2410_common_frate_clks)); + + samsung_clk_register_alias(&xti_alias, 1); +} + +void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *base) +{ + reg_base = base; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } + + samsung_clk_init(np, reg_base, NR_CLKS); + + /* Register external clocks only in non-dt cases */ + if (!np) + s3c2410_common_clk_register_fixed_ext(xti_f); + + if (current_soc == 2410) { + if (_get_rate("xti") == 12 * MHZ) { + s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl; + s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl; + } + + /* Register PLLs. */ + samsung_clk_register_pll(s3c2410_plls, + ARRAY_SIZE(s3c2410_plls), reg_base); + + } else { /* S3C2440, S3C2442 */ + if (_get_rate("xti") == 12 * MHZ) { + /* + * plls follow different calculation schemes, with the + * upll following the same scheme as the s3c2410 plls + */ + s3c244x_common_plls[mpll].rate_table = + pll_s3c244x_12mhz_tbl; + s3c244x_common_plls[upll].rate_table = + pll_s3c2410_12mhz_tbl; + } + + /* Register PLLs. */ + samsung_clk_register_pll(s3c244x_common_plls, + ARRAY_SIZE(s3c244x_common_plls), reg_base); + } + + /* Register common internal clocks. */ + samsung_clk_register_mux(s3c2410_common_muxes, + ARRAY_SIZE(s3c2410_common_muxes)); + samsung_clk_register_div(s3c2410_common_dividers, + ARRAY_SIZE(s3c2410_common_dividers)); + samsung_clk_register_gate(s3c2410_common_gates, + ARRAY_SIZE(s3c2410_common_gates)); + + if (current_soc == S3C2440 || current_soc == S3C2442) { + samsung_clk_register_div(s3c244x_common_dividers, + ARRAY_SIZE(s3c244x_common_dividers)); + samsung_clk_register_gate(s3c244x_common_gates, + ARRAY_SIZE(s3c244x_common_gates)); + samsung_clk_register_mux(s3c244x_common_muxes, + ARRAY_SIZE(s3c244x_common_muxes)); + samsung_clk_register_fixed_factor(s3c244x_common_ffactor, + ARRAY_SIZE(s3c244x_common_ffactor)); + } + + /* Register SoC-specific clocks. */ + switch (current_soc) { + case S3C2410: + samsung_clk_register_div(s3c2410_dividers, + ARRAY_SIZE(s3c2410_dividers)); + samsung_clk_register_fixed_factor(s3c2410_ffactor, + ARRAY_SIZE(s3c2410_ffactor)); + samsung_clk_register_alias(s3c2410_aliases, + ARRAY_SIZE(s3c2410_common_aliases)); + break; + case S3C2440: + samsung_clk_register_mux(s3c2440_muxes, + ARRAY_SIZE(s3c2440_muxes)); + samsung_clk_register_gate(s3c2440_gates, + ARRAY_SIZE(s3c2440_gates)); + break; + case S3C2442: + samsung_clk_register_mux(s3c2442_muxes, + ARRAY_SIZE(s3c2442_muxes)); + samsung_clk_register_fixed_factor(s3c2442_ffactor, + ARRAY_SIZE(s3c2442_ffactor)); + break; + } + + /* + * Register common aliases at the end, as some of the aliased clocks + * are SoC specific. + */ + samsung_clk_register_alias(s3c2410_common_aliases, + ARRAY_SIZE(s3c2410_common_aliases)); + + if (current_soc == S3C2440 || current_soc == S3C2442) { + samsung_clk_register_alias(s3c244x_common_aliases, + ARRAY_SIZE(s3c244x_common_aliases)); + } + + s3c2410_clk_sleep_init(); +} + +static void __init s3c2410_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2410, 0); +} +CLK_OF_DECLARE(s3c2410_clk, "samsung,s3c2410-clock", s3c2410_clk_init); + +static void __init s3c2440_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2440, 0); +} +CLK_OF_DECLARE(s3c2440_clk, "samsung,s3c2440-clock", s3c2440_clk_init); + +static void __init s3c2442_clk_init(struct device_node *np) +{ + s3c2410_common_clk_init(np, 0, S3C2442, 0); +} +CLK_OF_DECLARE(s3c2442_clk, "samsung,s3c2442-clock", s3c2442_clk_init); diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c new file mode 100644 index 000000000000..0f11a07d5c01 --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2412.c @@ -0,0 +1,269 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for S3C2412 and S3C2413. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clock/s3c2412.h> + +#include "clk.h" +#include "clk-pll.h" + +#define LOCKTIME 0x00 +#define MPLLCON 0x04 +#define UPLLCON 0x08 +#define CLKCON 0x0c +#define CLKDIVN 0x14 +#define CLKSRC 0x1c + +/* list of PLLs to be registered */ +enum s3c2412_plls { + mpll, upll, +}; + +static void __iomem *reg_base; + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *s3c2412_save; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static unsigned long s3c2412_clk_regs[] __initdata = { + LOCKTIME, + MPLLCON, + UPLLCON, + CLKCON, + CLKDIVN, + CLKSRC, +}; + +static int s3c2412_clk_suspend(void) +{ + samsung_clk_save(reg_base, s3c2412_save, + ARRAY_SIZE(s3c2412_clk_regs)); + + return 0; +} + +static void s3c2412_clk_resume(void) +{ + samsung_clk_restore(reg_base, s3c2412_save, + ARRAY_SIZE(s3c2412_clk_regs)); +} + +static struct syscore_ops s3c2412_clk_syscore_ops = { + .suspend = s3c2412_clk_suspend, + .resume = s3c2412_clk_resume, +}; + +static void s3c2412_clk_sleep_init(void) +{ + s3c2412_save = samsung_clk_alloc_reg_dump(s3c2412_clk_regs, + ARRAY_SIZE(s3c2412_clk_regs)); + if (!s3c2412_save) { + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; + } + + register_syscore_ops(&s3c2412_clk_syscore_ops); + return; +} +#else +static void s3c2412_clk_sleep_init(void) {} +#endif + +static struct clk_div_table divxti_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 6 }, + { .val = 4, .div = 8 }, + { .val = 5, .div = 10 }, + { .val = 6, .div = 12 }, + { .val = 7, .div = 14 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2412_dividers[] __initdata = { + DIV_T(0, "div_xti", "xti", CLKSRC, 0, 3, divxti_d), + DIV(0, "div_cam", "mux_cam", CLKDIVN, 16, 4), + DIV(0, "div_i2s", "mux_i2s", CLKDIVN, 12, 4), + DIV(0, "div_uart", "mux_uart", CLKDIVN, 8, 4), + DIV(0, "div_usb", "mux_usb", CLKDIVN, 6, 1), + DIV(0, "div_hclk_half", "hclk", CLKDIVN, 5, 1), + DIV(ARMDIV, "armdiv", "msysclk", CLKDIVN, 3, 1), + DIV(PCLK, "pclk", "hclk", CLKDIVN, 2, 1), + DIV(HCLK, "hclk", "armdiv", CLKDIVN, 0, 2), +}; + +struct samsung_fixed_factor_clock s3c2412_ffactor[] __initdata = { + FFACTOR(0, "ff_hclk", "hclk", 2, 1, CLK_SET_RATE_PARENT), +}; + +/* + * The first two use the OM[4] setting, which is not readable from + * software, so assume it is set to xti. + */ +PNAME(erefclk_p) = { "xti", "xti", "xti", "ext" }; +PNAME(urefclk_p) = { "xti", "xti", "xti", "ext" }; + +PNAME(camclk_p) = { "usysclk", "hclk" }; +PNAME(usbclk_p) = { "usysclk", "hclk" }; +PNAME(i2sclk_p) = { "erefclk", "mpll" }; +PNAME(uartclk_p) = { "erefclk", "mpll" }; +PNAME(usysclk_p) = { "urefclk", "upll" }; +PNAME(msysclk_p) = { "mdivclk", "mpll" }; +PNAME(mdivclk_p) = { "xti", "div_xti" }; +PNAME(armclk_p) = { "armdiv", "hclk" }; + +struct samsung_mux_clock s3c2412_muxes[] __initdata = { + MUX(0, "erefclk", erefclk_p, CLKSRC, 14, 2), + MUX(0, "urefclk", urefclk_p, CLKSRC, 12, 2), + MUX(0, "mux_cam", camclk_p, CLKSRC, 11, 1), + MUX(0, "mux_usb", usbclk_p, CLKSRC, 10, 1), + MUX(0, "mux_i2s", i2sclk_p, CLKSRC, 9, 1), + MUX(0, "mux_uart", uartclk_p, CLKSRC, 8, 1), + MUX(USYSCLK, "usysclk", usysclk_p, CLKSRC, 5, 1), + MUX(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1), + MUX(MDIVCLK, "mdivclk", mdivclk_p, CLKSRC, 3, 1), + MUX(ARMCLK, "armclk", armclk_p, CLKDIVN, 4, 1), +}; + +static struct samsung_pll_clock s3c2412_plls[] __initdata = { + [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti", + LOCKTIME, MPLLCON, NULL), + [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "urefclk", + LOCKTIME, UPLLCON, NULL), +}; + +struct samsung_gate_clock s3c2412_gates[] __initdata = { + GATE(PCLK_WDT, "wdt", "pclk", CLKCON, 28, 0, 0), + GATE(PCLK_SPI, "spi", "pclk", CLKCON, 27, 0, 0), + GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 26, 0, 0), + GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 25, 0, 0), + GATE(PCLK_ADC, "adc", "pclk", CLKCON, 24, 0, 0), + GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 23, 0, 0), + GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 22, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 21, 0, 0), + GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 20, 0, 0), + GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 19, 0, 0), + GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 18, 0, 0), + GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 17, 0, 0), + GATE(PCLK_USBD, "usb-device", "pclk", CLKCON, 16, 0, 0), + GATE(SCLK_CAM, "sclk_cam", "div_cam", CLKCON, 15, 0, 0), + GATE(SCLK_UART, "sclk_uart", "div_uart", CLKCON, 14, 0, 0), + GATE(SCLK_I2S, "sclk_i2s", "div_i2s", CLKCON, 13, 0, 0), + GATE(SCLK_USBH, "sclk_usbh", "div_usb", CLKCON, 12, 0, 0), + GATE(SCLK_USBD, "sclk_usbd", "div_usb", CLKCON, 11, 0, 0), + GATE(HCLK_HALF, "hclk_half", "div_hclk_half", CLKCON, 10, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_X2, "hclkx2", "ff_hclk", CLKCON, 9, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_SDRAM, "sdram", "hclk", CLKCON, 8, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0), + GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0), + GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0), + GATE(HCLK_DMA3, "dma3", "hclk", CLKCON, 3, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA2, "dma2", "hclk", CLKCON, 2, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA1, "dma1", "hclk", CLKCON, 1, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA0, "dma0", "hclk", CLKCON, 0, CLK_IGNORE_UNUSED, 0), +}; + +struct samsung_clock_alias s3c2412_aliases[] __initdata = { + ALIAS(PCLK_UART0, "s3c2412-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2412-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2412-uart.2", "uart"), + ALIAS(PCLK_UART0, "s3c2412-uart.0", "clk_uart_baud2"), + ALIAS(PCLK_UART1, "s3c2412-uart.1", "clk_uart_baud2"), + ALIAS(PCLK_UART2, "s3c2412-uart.2", "clk_uart_baud2"), + ALIAS(SCLK_UART, NULL, "clk_uart_baud3"), + ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"), + ALIAS(PCLK_ADC, NULL, "adc"), + ALIAS(PCLK_RTC, NULL, "rtc"), + ALIAS(PCLK_PWM, NULL, "timers"), + ALIAS(HCLK_LCD, NULL, "lcd"), + ALIAS(PCLK_USBD, NULL, "usb-device"), + ALIAS(SCLK_USBD, NULL, "usb-bus-gadget"), + ALIAS(HCLK_USBH, NULL, "usb-host"), + ALIAS(SCLK_USBH, NULL, "usb-bus-host"), + ALIAS(ARMCLK, NULL, "armclk"), + ALIAS(HCLK, NULL, "hclk"), + ALIAS(MPLL, NULL, "mpll"), + ALIAS(MSYSCLK, NULL, "fclk"), +}; + +/* + * fixed rate clocks generated outside the soc + * Only necessary until the devicetree-move is complete + */ +#define XTI 1 +struct samsung_fixed_rate_clock s3c2412_common_frate_clks[] __initdata = { + FRATE(XTI, "xti", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext", NULL, CLK_IS_ROOT, 0), +}; + +static void __init s3c2412_common_clk_register_fixed_ext(unsigned long xti_f, + unsigned long ext_f) +{ + /* xtal alias is necessary for the current cpufreq driver */ + struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal"); + + s3c2412_common_frate_clks[0].fixed_rate = xti_f; + s3c2412_common_frate_clks[1].fixed_rate = ext_f; + samsung_clk_register_fixed_rate(s3c2412_common_frate_clks, + ARRAY_SIZE(s3c2412_common_frate_clks)); + + samsung_clk_register_alias(&xti_alias, 1); +} + +void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *base) +{ + reg_base = base; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } + + samsung_clk_init(np, reg_base, NR_CLKS); + + /* Register external clocks only in non-dt cases */ + if (!np) + s3c2412_common_clk_register_fixed_ext(xti_f, ext_f); + + /* Register PLLs. */ + samsung_clk_register_pll(s3c2412_plls, ARRAY_SIZE(s3c2412_plls), + reg_base); + + /* Register common internal clocks. */ + samsung_clk_register_mux(s3c2412_muxes, ARRAY_SIZE(s3c2412_muxes)); + samsung_clk_register_div(s3c2412_dividers, + ARRAY_SIZE(s3c2412_dividers)); + samsung_clk_register_gate(s3c2412_gates, ARRAY_SIZE(s3c2412_gates)); + samsung_clk_register_fixed_factor(s3c2412_ffactor, + ARRAY_SIZE(s3c2412_ffactor)); + samsung_clk_register_alias(s3c2412_aliases, + ARRAY_SIZE(s3c2412_aliases)); + + s3c2412_clk_sleep_init(); +} + +static void __init s3c2412_clk_init(struct device_node *np) +{ + s3c2412_common_clk_init(np, 0, 0, 0); +} +CLK_OF_DECLARE(s3c2412_clk, "samsung,s3c2412-clock", s3c2412_clk_init); diff --git a/drivers/clk/samsung/clk-s3c2443.c b/drivers/clk/samsung/clk-s3c2443.c new file mode 100644 index 000000000000..8e4f4517e95c --- /dev/null +++ b/drivers/clk/samsung/clk-s3c2443.c @@ -0,0 +1,462 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for S3C2443 and following SoCs. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include <dt-bindings/clock/s3c2443.h> + +#include "clk.h" +#include "clk-pll.h" + +/* S3C2416 clock controller register offsets */ +#define LOCKCON0 0x00 +#define LOCKCON1 0x04 +#define MPLLCON 0x10 +#define EPLLCON 0x18 +#define EPLLCON_K 0x1C +#define CLKSRC 0x20 +#define CLKDIV0 0x24 +#define CLKDIV1 0x28 +#define CLKDIV2 0x2C +#define HCLKCON 0x30 +#define PCLKCON 0x34 +#define SCLKCON 0x38 + +/* the soc types */ +enum supported_socs { + S3C2416, + S3C2443, + S3C2450, +}; + +/* list of PLLs to be registered */ +enum s3c2443_plls { + mpll, epll, +}; + +static void __iomem *reg_base; + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *s3c2443_save; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static unsigned long s3c2443_clk_regs[] __initdata = { + LOCKCON0, + LOCKCON1, + MPLLCON, + EPLLCON, + EPLLCON_K, + CLKSRC, + CLKDIV0, + CLKDIV1, + CLKDIV2, + PCLKCON, + HCLKCON, + SCLKCON, +}; + +static int s3c2443_clk_suspend(void) +{ + samsung_clk_save(reg_base, s3c2443_save, + ARRAY_SIZE(s3c2443_clk_regs)); + + return 0; +} + +static void s3c2443_clk_resume(void) +{ + samsung_clk_restore(reg_base, s3c2443_save, + ARRAY_SIZE(s3c2443_clk_regs)); +} + +static struct syscore_ops s3c2443_clk_syscore_ops = { + .suspend = s3c2443_clk_suspend, + .resume = s3c2443_clk_resume, +}; + +static void s3c2443_clk_sleep_init(void) +{ + s3c2443_save = samsung_clk_alloc_reg_dump(s3c2443_clk_regs, + ARRAY_SIZE(s3c2443_clk_regs)); + if (!s3c2443_save) { + pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", + __func__); + return; + } + + register_syscore_ops(&s3c2443_clk_syscore_ops); + return; +} +#else +static void s3c2443_clk_sleep_init(void) {} +#endif + +PNAME(epllref_p) = { "mpllref", "mpllref", "xti", "ext" }; +PNAME(esysclk_p) = { "epllref", "epll" }; +PNAME(mpllref_p) = { "xti", "mdivclk" }; +PNAME(msysclk_p) = { "mpllref", "mpll" }; +PNAME(armclk_p) = { "armdiv" , "hclk" }; +PNAME(i2s0_p) = { "div_i2s0", "ext_i2s", "epllref", "epllref" }; + +struct samsung_mux_clock s3c2443_common_muxes[] __initdata = { + MUX(0, "epllref", epllref_p, CLKSRC, 7, 2), + MUX(ESYSCLK, "esysclk", esysclk_p, CLKSRC, 6, 1), + MUX(0, "mpllref", mpllref_p, CLKSRC, 3, 1), + MUX_A(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1, "msysclk"), + MUX_A(ARMCLK, "armclk", armclk_p, CLKDIV0, 13, 1, "armclk"), + MUX(0, "mux_i2s0", i2s0_p, CLKSRC, 14, 2), +}; + +static struct clk_div_table hclk_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 3, .div = 4 }, + { /* sentinel */ }, +}; + +static struct clk_div_table mdivclk_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 3 }, + { .val = 2, .div = 5 }, + { .val = 3, .div = 7 }, + { .val = 4, .div = 9 }, + { .val = 5, .div = 11 }, + { .val = 6, .div = 13 }, + { .val = 7, .div = 15 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2443_common_dividers[] __initdata = { + DIV_T(0, "mdivclk", "xti", CLKDIV0, 6, 3, mdivclk_d), + DIV(0, "prediv", "msysclk", CLKDIV0, 4, 2), + DIV_T(HCLK, "hclk", "prediv", CLKDIV0, 0, 2, hclk_d), + DIV(PCLK, "pclk", "hclk", CLKDIV0, 2, 1), + DIV(0, "div_hsspi0_epll", "esysclk", CLKDIV1, 24, 2), + DIV(0, "div_fimd", "esysclk", CLKDIV1, 16, 8), + DIV(0, "div_i2s0", "esysclk", CLKDIV1, 12, 4), + DIV(0, "div_uart", "esysclk", CLKDIV1, 8, 4), + DIV(0, "div_hsmmc1", "esysclk", CLKDIV1, 6, 2), + DIV(0, "div_usbhost", "esysclk", CLKDIV1, 4, 2), +}; + +struct samsung_gate_clock s3c2443_common_gates[] __initdata = { + GATE(SCLK_HSMMC_EXT, "sclk_hsmmcext", "ext", SCLKCON, 13, 0, 0), + GATE(SCLK_HSMMC1, "sclk_hsmmc1", "div_hsmmc1", SCLKCON, 12, 0, 0), + GATE(SCLK_FIMD, "sclk_fimd", "div_fimd", SCLKCON, 10, 0, 0), + GATE(SCLK_I2S0, "sclk_i2s0", "mux_i2s0", SCLKCON, 9, 0, 0), + GATE(SCLK_UART, "sclk_uart", "div_uart", SCLKCON, 8, 0, 0), + GATE(SCLK_USBH, "sclk_usbhost", "div_usbhost", SCLKCON, 1, 0, 0), + GATE(HCLK_DRAM, "dram", "hclk", HCLKCON, 19, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_SSMC, "ssmc", "hclk", HCLKCON, 18, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_HSMMC1, "hsmmc1", "hclk", HCLKCON, 16, 0, 0), + GATE(HCLK_USBD, "usb-device", "hclk", HCLKCON, 12, 0, 0), + GATE(HCLK_USBH, "usb-host", "hclk", HCLKCON, 11, 0, 0), + GATE(HCLK_LCD, "lcd", "hclk", HCLKCON, 9, 0, 0), + GATE(HCLK_DMA5, "dma5", "hclk", HCLKCON, 5, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA4, "dma4", "hclk", HCLKCON, 4, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA3, "dma3", "hclk", HCLKCON, 3, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA2, "dma2", "hclk", HCLKCON, 2, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA1, "dma1", "hclk", HCLKCON, 1, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA0, "dma0", "hclk", HCLKCON, 0, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_GPIO, "gpio", "pclk", PCLKCON, 13, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_RTC, "rtc", "pclk", PCLKCON, 12, 0, 0), + GATE(PCLK_WDT, "wdt", "pclk", PCLKCON, 11, 0, 0), + GATE(PCLK_PWM, "pwm", "pclk", PCLKCON, 10, 0, 0), + GATE(PCLK_I2S0, "i2s0", "pclk", PCLKCON, 9, 0, 0), + GATE(PCLK_AC97, "ac97", "pclk", PCLKCON, 8, 0, 0), + GATE(PCLK_ADC, "adc", "pclk", PCLKCON, 7, 0, 0), + GATE(PCLK_SPI0, "spi0", "pclk", PCLKCON, 6, 0, 0), + GATE(PCLK_I2C0, "i2c0", "pclk", PCLKCON, 4, 0, 0), + GATE(PCLK_UART3, "uart3", "pclk", PCLKCON, 3, 0, 0), + GATE(PCLK_UART2, "uart2", "pclk", PCLKCON, 2, 0, 0), + GATE(PCLK_UART1, "uart1", "pclk", PCLKCON, 1, 0, 0), + GATE(PCLK_UART0, "uart0", "pclk", PCLKCON, 0, 0, 0), +}; + +struct samsung_clock_alias s3c2443_common_aliases[] __initdata = { + ALIAS(HCLK, NULL, "hclk"), + ALIAS(HCLK_SSMC, NULL, "nand"), + ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"), + ALIAS(PCLK_UART3, "s3c2440-uart.3", "uart"), + ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"), + ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"), + ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"), + ALIAS(PCLK_UART3, "s3c2440-uart.3", "clk_uart_baud2"), + ALIAS(SCLK_UART, NULL, "clk_uart_baud3"), + ALIAS(PCLK_PWM, NULL, "timers"), + ALIAS(PCLK_RTC, NULL, "rtc"), + ALIAS(PCLK_WDT, NULL, "watchdog"), + ALIAS(PCLK_ADC, NULL, "adc"), + ALIAS(PCLK_I2C0, "s3c2410-i2c.0", "i2c"), + ALIAS(HCLK_USBD, NULL, "usb-device"), + ALIAS(HCLK_USBH, NULL, "usb-host"), + ALIAS(SCLK_USBH, NULL, "usb-bus-host"), + ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi"), + ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi_busclk0"), + ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "hsmmc"), + ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"), + ALIAS(PCLK_I2S0, "samsung-i2s.0", "iis"), + ALIAS(SCLK_I2S0, NULL, "i2s-if"), + ALIAS(HCLK_LCD, NULL, "lcd"), + ALIAS(SCLK_FIMD, NULL, "sclk_fimd"), +}; + +/* S3C2416 specific clocks */ + +static struct samsung_pll_clock s3c2416_pll_clks[] __initdata = { + [mpll] = PLL(pll_6552_s3c2416, 0, "mpll", "mpllref", + LOCKCON0, MPLLCON, NULL), + [epll] = PLL(pll_6553, 0, "epll", "epllref", + LOCKCON1, EPLLCON, NULL), +}; + +PNAME(s3c2416_hsmmc0_p) = { "sclk_hsmmc0", "sclk_hsmmcext" }; +PNAME(s3c2416_hsmmc1_p) = { "sclk_hsmmc1", "sclk_hsmmcext" }; +PNAME(s3c2416_hsspi0_p) = { "hsspi0_epll", "hsspi0_mpll" }; + +static struct clk_div_table armdiv_s3c2416_d[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 3 }, + { .val = 3, .div = 4 }, + { .val = 5, .div = 6 }, + { .val = 7, .div = 8 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2416_dividers[] __initdata = { + DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 3, armdiv_s3c2416_d), + DIV(0, "div_hsspi0_mpll", "msysclk", CLKDIV2, 0, 4), + DIV(0, "div_hsmmc0", "esysclk", CLKDIV2, 6, 2), +}; + +struct samsung_mux_clock s3c2416_muxes[] __initdata = { + MUX(MUX_HSMMC0, "mux_hsmmc0", s3c2416_hsmmc0_p, CLKSRC, 16, 1), + MUX(MUX_HSMMC1, "mux_hsmmc1", s3c2416_hsmmc1_p, CLKSRC, 17, 1), + MUX(MUX_HSSPI0, "mux_hsspi0", s3c2416_hsspi0_p, CLKSRC, 18, 1), +}; + +struct samsung_gate_clock s3c2416_gates[] __initdata = { + GATE(0, "hsspi0_mpll", "div_hsspi0_mpll", SCLKCON, 19, 0, 0), + GATE(0, "hsspi0_epll", "div_hsspi0_epll", SCLKCON, 14, 0, 0), + GATE(0, "sclk_hsmmc0", "div_hsmmc0", SCLKCON, 6, 0, 0), + GATE(HCLK_2D, "2d", "hclk", HCLKCON, 20, 0, 0), + GATE(HCLK_HSMMC0, "hsmmc0", "hclk", HCLKCON, 15, 0, 0), + GATE(HCLK_IROM, "irom", "hclk", HCLKCON, 13, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_PCM, "pcm", "pclk", PCLKCON, 19, 0, 0), +}; + +struct samsung_clock_alias s3c2416_aliases[] __initdata = { + ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"), + ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"), + ALIAS(MUX_HSMMC0, "s3c-sdhci.0", "mmc_busclk.2"), + ALIAS(MUX_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"), + ALIAS(MUX_HSSPI0, "s3c2443-spi.0", "spi_busclk2"), + ALIAS(ARMDIV, NULL, "armdiv"), +}; + +/* S3C2443 specific clocks */ + +static struct samsung_pll_clock s3c2443_pll_clks[] __initdata = { + [mpll] = PLL(pll_3000, 0, "mpll", "mpllref", + LOCKCON0, MPLLCON, NULL), + [epll] = PLL(pll_2126, 0, "epll", "epllref", + LOCKCON1, EPLLCON, NULL), +}; + +static struct clk_div_table armdiv_s3c2443_d[] = { + { .val = 0, .div = 1 }, + { .val = 8, .div = 2 }, + { .val = 2, .div = 3 }, + { .val = 9, .div = 4 }, + { .val = 10, .div = 6 }, + { .val = 11, .div = 8 }, + { .val = 13, .div = 12 }, + { .val = 15, .div = 16 }, + { /* sentinel */ }, +}; + +struct samsung_div_clock s3c2443_dividers[] __initdata = { + DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 4, armdiv_s3c2443_d), + DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4), +}; + +struct samsung_gate_clock s3c2443_gates[] __initdata = { + GATE(SCLK_HSSPI0, "sclk_hsspi0", "div_hsspi0_epll", SCLKCON, 14, 0, 0), + GATE(SCLK_CAM, "sclk_cam", "div_cam", SCLKCON, 11, 0, 0), + GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0), + GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 15, 0, 0), + GATE(PCLK_SDI, "sdi", "pclk", PCLKCON, 5, 0, 0), +}; + +struct samsung_clock_alias s3c2443_aliases[] __initdata = { + ALIAS(SCLK_HSSPI0, "s3c2443-spi.0", "spi_busclk2"), + ALIAS(SCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"), + ALIAS(SCLK_CAM, NULL, "camif-upll"), + ALIAS(PCLK_SPI1, "s3c2410-spi.0", "spi"), + ALIAS(PCLK_SDI, NULL, "sdi"), + ALIAS(HCLK_CFC, NULL, "cfc"), + ALIAS(ARMDIV, NULL, "armdiv"), +}; + +/* S3C2450 specific clocks */ + +PNAME(s3c2450_cam_p) = { "div_cam", "hclk" }; +PNAME(s3c2450_hsspi1_p) = { "hsspi1_epll", "hsspi1_mpll" }; +PNAME(i2s1_p) = { "div_i2s1", "ext_i2s", "epllref", "epllref" }; + +struct samsung_div_clock s3c2450_dividers[] __initdata = { + DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4), + DIV(0, "div_hsspi1_epll", "esysclk", CLKDIV2, 24, 2), + DIV(0, "div_hsspi1_mpll", "msysclk", CLKDIV2, 16, 4), + DIV(0, "div_i2s1", "esysclk", CLKDIV2, 12, 4), +}; + +struct samsung_mux_clock s3c2450_muxes[] __initdata = { + MUX(0, "mux_cam", s3c2450_cam_p, CLKSRC, 20, 1), + MUX(MUX_HSSPI1, "mux_hsspi1", s3c2450_hsspi1_p, CLKSRC, 19, 1), + MUX(0, "mux_i2s1", i2s1_p, CLKSRC, 12, 2), +}; + +struct samsung_gate_clock s3c2450_gates[] __initdata = { + GATE(SCLK_I2S1, "sclk_i2s1", "div_i2s1", SCLKCON, 5, 0, 0), + GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, 0, 0), + GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0), + GATE(HCLK_DMA7, "dma7", "hclk", HCLKCON, 7, CLK_IGNORE_UNUSED, 0), + GATE(HCLK_DMA6, "dma6", "hclk", HCLKCON, 6, CLK_IGNORE_UNUSED, 0), + GATE(PCLK_I2S1, "i2s1", "pclk", PCLKCON, 17, 0, 0), + GATE(PCLK_I2C1, "i2c1", "pclk", PCLKCON, 16, 0, 0), + GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 14, 0, 0), +}; + +struct samsung_clock_alias s3c2450_aliases[] __initdata = { + ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi"), + ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi_busclk0"), + ALIAS(MUX_HSSPI1, "s3c2443-spi.1", "spi_busclk2"), + ALIAS(PCLK_I2C1, "s3c2410-i2c.1", "i2c"), +}; + +/* + * fixed rate clocks generated outside the soc + * Only necessary until the devicetree-move is complete + */ +struct samsung_fixed_rate_clock s3c2443_common_frate_clks[] __initdata = { + FRATE(0, "xti", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext_i2s", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ext_uart", NULL, CLK_IS_ROOT, 0), +}; + +static void __init s3c2443_common_clk_register_fixed_ext(unsigned long xti_f) +{ + s3c2443_common_frate_clks[0].fixed_rate = xti_f; + samsung_clk_register_fixed_rate(s3c2443_common_frate_clks, + ARRAY_SIZE(s3c2443_common_frate_clks)); +} + +void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *base) +{ + reg_base = base; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } + + samsung_clk_init(np, reg_base, NR_CLKS); + + /* Register external clocks only in non-dt cases */ + if (!np) + s3c2443_common_clk_register_fixed_ext(xti_f); + + /* Register PLLs. */ + if (current_soc == S3C2416 || current_soc == S3C2450) + samsung_clk_register_pll(s3c2416_pll_clks, + ARRAY_SIZE(s3c2416_pll_clks), reg_base); + else + samsung_clk_register_pll(s3c2443_pll_clks, + ARRAY_SIZE(s3c2443_pll_clks), reg_base); + + /* Register common internal clocks. */ + samsung_clk_register_mux(s3c2443_common_muxes, + ARRAY_SIZE(s3c2443_common_muxes)); + samsung_clk_register_div(s3c2443_common_dividers, + ARRAY_SIZE(s3c2443_common_dividers)); + samsung_clk_register_gate(s3c2443_common_gates, + ARRAY_SIZE(s3c2443_common_gates)); + samsung_clk_register_alias(s3c2443_common_aliases, + ARRAY_SIZE(s3c2443_common_aliases)); + + /* Register SoC-specific clocks. */ + switch (current_soc) { + case S3C2450: + samsung_clk_register_div(s3c2450_dividers, + ARRAY_SIZE(s3c2450_dividers)); + samsung_clk_register_mux(s3c2450_muxes, + ARRAY_SIZE(s3c2450_muxes)); + samsung_clk_register_gate(s3c2450_gates, + ARRAY_SIZE(s3c2450_gates)); + samsung_clk_register_alias(s3c2450_aliases, + ARRAY_SIZE(s3c2450_aliases)); + /* fall through, as s3c2450 extends the s3c2416 clocks */ + case S3C2416: + samsung_clk_register_div(s3c2416_dividers, + ARRAY_SIZE(s3c2416_dividers)); + samsung_clk_register_mux(s3c2416_muxes, + ARRAY_SIZE(s3c2416_muxes)); + samsung_clk_register_gate(s3c2416_gates, + ARRAY_SIZE(s3c2416_gates)); + samsung_clk_register_alias(s3c2416_aliases, + ARRAY_SIZE(s3c2416_aliases)); + break; + case S3C2443: + samsung_clk_register_div(s3c2443_dividers, + ARRAY_SIZE(s3c2443_dividers)); + samsung_clk_register_gate(s3c2443_gates, + ARRAY_SIZE(s3c2443_gates)); + samsung_clk_register_alias(s3c2443_aliases, + ARRAY_SIZE(s3c2443_aliases)); + break; + } + + s3c2443_clk_sleep_init(); +} + +static void __init s3c2416_clk_init(struct device_node *np) +{ + s3c2443_common_clk_init(np, 0, S3C2416, 0); +} +CLK_OF_DECLARE(s3c2416_clk, "samsung,s3c2416-clock", s3c2416_clk_init); + +static void __init s3c2443_clk_init(struct device_node *np) +{ + s3c2443_common_clk_init(np, 0, S3C2443, 0); +} +CLK_OF_DECLARE(s3c2443_clk, "samsung,s3c2443-clock", s3c2443_clk_init); + +static void __init s3c2450_clk_init(struct device_node *np) +{ + s3c2443_common_clk_init(np, 0, S3C2450, 0); +} +CLK_OF_DECLARE(s3c2450_clk, "samsung,s3c2450-clock", s3c2450_clk_init); diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index be1b2b5c9753..227ebf7c1eea 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -141,6 +141,7 @@ static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) { + cfg->mpll = _clk_mpll; (cfg->info->set_fvco)(cfg); } diff --git a/include/dt-bindings/clock/s3c2410.h b/include/dt-bindings/clock/s3c2410.h new file mode 100644 index 000000000000..352a7673fc69 --- /dev/null +++ b/include/dt-bindings/clock/s3c2410.h @@ -0,0 +1,62 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2410 and later. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ + +/* id 1 is reserved */ +#define MPLL 2 +#define UPLL 3 +#define FCLK 4 +#define HCLK 5 +#define PCLK 6 +#define UCLK 7 +#define ARMCLK 8 + +/* pclk-gates */ +#define PCLK_UART0 16 +#define PCLK_UART1 17 +#define PCLK_UART2 18 +#define PCLK_I2C 19 +#define PCLK_SDI 20 +#define PCLK_SPI 21 +#define PCLK_ADC 22 +#define PCLK_AC97 23 +#define PCLK_I2S 24 +#define PCLK_PWM 25 +#define PCLK_RTC 26 +#define PCLK_GPIO 27 + + +/* hclk-gates */ +#define HCLK_LCD 32 +#define HCLK_USBH 33 +#define HCLK_USBD 34 +#define HCLK_NAND 35 +#define HCLK_CAM 36 + + +#define CAMIF 40 + + +/* Total number of clocks. */ +#define NR_CLKS (CAMIF + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */ diff --git a/include/dt-bindings/clock/s3c2412.h b/include/dt-bindings/clock/s3c2412.h new file mode 100644 index 000000000000..aac1dcfda81c --- /dev/null +++ b/include/dt-bindings/clock/s3c2412.h @@ -0,0 +1,73 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2412. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ + +/* id 1 is reserved */ +#define MPLL 2 +#define UPLL 3 +#define MDIVCLK 4 +#define MSYSCLK 5 +#define USYSCLK 6 +#define HCLK 7 +#define PCLK 8 +#define ARMDIV 9 +#define ARMCLK 10 + + +/* Special clocks */ +#define SCLK_CAM 16 +#define SCLK_UART 17 +#define SCLK_I2S 18 +#define SCLK_USBD 19 +#define SCLK_USBH 20 + +/* pclk-gates */ +#define PCLK_WDT 32 +#define PCLK_SPI 33 +#define PCLK_I2S 34 +#define PCLK_I2C 35 +#define PCLK_ADC 36 +#define PCLK_RTC 37 +#define PCLK_GPIO 38 +#define PCLK_UART2 39 +#define PCLK_UART1 40 +#define PCLK_UART0 41 +#define PCLK_SDI 42 +#define PCLK_PWM 43 +#define PCLK_USBD 44 + +/* hclk-gates */ +#define HCLK_HALF 48 +#define HCLK_X2 49 +#define HCLK_SDRAM 50 +#define HCLK_USBH 51 +#define HCLK_LCD 52 +#define HCLK_NAND 53 +#define HCLK_DMA3 54 +#define HCLK_DMA2 55 +#define HCLK_DMA1 56 +#define HCLK_DMA0 57 + +/* Total number of clocks. */ +#define NR_CLKS (HCLK_DMA0 + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H */ diff --git a/include/dt-bindings/clock/s3c2443.h b/include/dt-bindings/clock/s3c2443.h new file mode 100644 index 000000000000..37e66b054d64 --- /dev/null +++ b/include/dt-bindings/clock/s3c2443.h @@ -0,0 +1,92 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clock controllers of Samsung S3C2443 and later. + */ + +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H +#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H + +/* + * Let each exported clock get a unique index, which is used on DT-enabled + * platforms to lookup the clock from a clock specifier. These indices are + * therefore considered an ABI and so must not be changed. This implies + * that new clocks should be added either in free spaces between clock groups + * or at the end. + */ + +/* Core clocks. */ +#define MSYSCLK 1 +#define ESYSCLK 2 +#define ARMDIV 3 +#define ARMCLK 4 +#define HCLK 5 +#define PCLK 6 + +/* Special clocks */ +#define SCLK_HSSPI0 16 +#define SCLK_FIMD 17 +#define SCLK_I2S0 18 +#define SCLK_I2S1 19 +#define SCLK_HSMMC1 20 +#define SCLK_HSMMC_EXT 21 +#define SCLK_CAM 22 +#define SCLK_UART 23 +#define SCLK_USBH 24 + +/* Muxes */ +#define MUX_HSSPI0 32 +#define MUX_HSSPI1 33 +#define MUX_HSMMC0 34 +#define MUX_HSMMC1 35 + +/* hclk-gates */ +#define HCLK_DMA0 48 +#define HCLK_DMA1 49 +#define HCLK_DMA2 50 +#define HCLK_DMA3 51 +#define HCLK_DMA4 52 +#define HCLK_DMA5 53 +#define HCLK_DMA6 54 +#define HCLK_DMA7 55 +#define HCLK_CAM 56 +#define HCLK_LCD 57 +#define HCLK_USBH 58 +#define HCLK_USBD 59 +#define HCLK_IROM 60 +#define HCLK_HSMMC0 61 +#define HCLK_HSMMC1 62 +#define HCLK_CFC 63 +#define HCLK_SSMC 64 +#define HCLK_DRAM 65 +#define HCLK_2D 66 + +/* pclk-gates */ +#define PCLK_UART0 72 +#define PCLK_UART1 73 +#define PCLK_UART2 74 +#define PCLK_UART3 75 +#define PCLK_I2C0 76 +#define PCLK_SDI 77 +#define PCLK_SPI0 78 +#define PCLK_ADC 79 +#define PCLK_AC97 80 +#define PCLK_I2S0 81 +#define PCLK_PWM 82 +#define PCLK_WDT 83 +#define PCLK_RTC 84 +#define PCLK_GPIO 85 +#define PCLK_SPI1 86 +#define PCLK_CHIPID 87 +#define PCLK_I2C1 88 +#define PCLK_I2S1 89 +#define PCLK_PCM 90 + +/* Total number of clocks. */ +#define NR_CLKS (PCLK_PCM + 1) + +#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */ |