diff options
| -rw-r--r-- | Documentation/devicetree/bindings/spi/spi-meson.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/spi/spi-orion.txt | 9 | ||||
| -rw-r--r-- | drivers/spi/spi-fsl-dspi.c | 9 | ||||
| -rw-r--r-- | drivers/spi/spi-imx.c | 11 | ||||
| -rw-r--r-- | drivers/spi/spi-jcore.c | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-meson-spicc.c | 1 | ||||
| -rw-r--r-- | drivers/spi/spi-orion.c | 21 |
7 files changed, 44 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-meson.txt b/Documentation/devicetree/bindings/spi/spi-meson.txt index 825c39cae74a..b7f5e86fed22 100644 --- a/Documentation/devicetree/bindings/spi/spi-meson.txt +++ b/Documentation/devicetree/bindings/spi/spi-meson.txt @@ -27,7 +27,9 @@ The Meson SPICC is generic SPI controller for general purpose Full-Duplex communications with dedicated 16 words RX/TX PIO FIFOs. Required properties: - - compatible: should be "amlogic,meson-gx-spicc" on Amlogic GX SoCs. + - compatible: should be: + "amlogic,meson-gx-spicc" on Amlogic GX and compatible SoCs. + "amlogic,meson-axg-spicc" on Amlogic AXG and compatible SoCs - reg: physical base address and length of the controller registers - interrupts: The interrupt specifier - clock-names: Must contain "core" diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt index df8ec31f2f07..8434a65fc12a 100644 --- a/Documentation/devicetree/bindings/spi/spi-orion.txt +++ b/Documentation/devicetree/bindings/spi/spi-orion.txt @@ -18,8 +18,17 @@ Required properties: The eight register sets following the control registers refer to chip-select lines 0 through 7 respectively. - cell-index : Which of multiple SPI controllers is this. +- clocks : pointers to the reference clocks for this device, the first + one is the one used for the clock on the spi bus, the + second one is optional and is the clock used for the + functional part of the controller + Optional properties: - interrupts : Is currently not used. +- clock-names : names of used clocks, mandatory if the second clock is + used, the name must be "core", and "axi" (the latter + is only for Armada 7K/8K). + Example: spi@10600 { diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index f652f70cb8db..0630962ce442 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -903,10 +903,9 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id) } static const struct of_device_id fsl_dspi_dt_ids[] = { - { .compatible = "fsl,vf610-dspi", .data = (void *)&vf610_data, }, - { .compatible = "fsl,ls1021a-v1.0-dspi", - .data = (void *)&ls1021a_v1_data, }, - { .compatible = "fsl,ls2085a-dspi", .data = (void *)&ls2085a_data, }, + { .compatible = "fsl,vf610-dspi", .data = &vf610_data, }, + { .compatible = "fsl,ls1021a-v1.0-dspi", .data = &ls1021a_v1_data, }, + { .compatible = "fsl,ls2085a-dspi", .data = &ls2085a_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids); @@ -980,7 +979,7 @@ static int dspi_probe(struct platform_device *pdev) master->dev.of_node = pdev->dev.of_node; master->cleanup = dspi_cleanup; - master->mode_bits = SPI_CPOL | SPI_CPHA; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; master->bits_per_word_mask = SPI_BPW_MASK(4) | SPI_BPW_MASK(8) | SPI_BPW_MASK(16); diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 40390d31a93b..6f57592a7f95 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -1622,6 +1622,11 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx->devtype_data->intctrl(spi_imx, 0); master->dev.of_node = pdev->dev.of_node; + ret = spi_bitbang_start(&spi_imx->bitbang); + if (ret) { + dev_err(&pdev->dev, "bitbang start failed with %d\n", ret); + goto out_clk_put; + } /* Request GPIO CS lines, if any */ if (!spi_imx->slave_mode && master->cs_gpios) { @@ -1640,12 +1645,6 @@ static int spi_imx_probe(struct platform_device *pdev) } } - ret = spi_bitbang_start(&spi_imx->bitbang); - if (ret) { - dev_err(&pdev->dev, "bitbang start failed with %d\n", ret); - goto out_clk_put; - } - dev_info(&pdev->dev, "probed\n"); clk_disable(spi_imx->clk_ipg); diff --git a/drivers/spi/spi-jcore.c b/drivers/spi/spi-jcore.c index cebfea5faa4b..dafed6280df3 100644 --- a/drivers/spi/spi-jcore.c +++ b/drivers/spi/spi-jcore.c @@ -198,8 +198,10 @@ static int jcore_spi_probe(struct platform_device *pdev) /* Register our spi controller */ err = devm_spi_register_master(&pdev->dev, master); - if (err) + if (err) { + clk_disable(clk); goto exit; + } return 0; diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index 7f8429635502..5c82910e3480 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -599,6 +599,7 @@ static int meson_spicc_remove(struct platform_device *pdev) static const struct of_device_id meson_spicc_of_match[] = { { .compatible = "amlogic,meson-gx-spicc", }, + { .compatible = "amlogic,meson-axg-spicc", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, meson_spicc_of_match); diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index 8974bb340b3a..deca63e82ff6 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -94,6 +94,7 @@ struct orion_spi { struct spi_master *master; void __iomem *base; struct clk *clk; + struct clk *axi_clk; const struct orion_spi_dev *devdata; struct orion_direct_acc direct_access[ORION_NUM_CHIPSELECTS]; @@ -634,6 +635,16 @@ static int orion_spi_probe(struct platform_device *pdev) if (status) goto out; + /* The following clock is only used by some SoCs */ + spi->axi_clk = devm_clk_get(&pdev->dev, "axi"); + if (IS_ERR(spi->axi_clk) && + PTR_ERR(spi->axi_clk) == -EPROBE_DEFER) { + status = -EPROBE_DEFER; + goto out_rel_clk; + } + if (!IS_ERR(spi->axi_clk)) + clk_prepare_enable(spi->axi_clk); + tclk_hz = clk_get_rate(spi->clk); /* @@ -658,7 +669,7 @@ static int orion_spi_probe(struct platform_device *pdev) spi->base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(spi->base)) { status = PTR_ERR(spi->base); - goto out_rel_clk; + goto out_rel_axi_clk; } /* Scan all SPI devices of this controller for direct mapped devices */ @@ -696,7 +707,7 @@ static int orion_spi_probe(struct platform_device *pdev) PAGE_SIZE); if (!spi->direct_access[cs].vaddr) { status = -ENOMEM; - goto out_rel_clk; + goto out_rel_axi_clk; } spi->direct_access[cs].size = PAGE_SIZE; @@ -724,6 +735,8 @@ static int orion_spi_probe(struct platform_device *pdev) out_rel_pm: pm_runtime_disable(&pdev->dev); +out_rel_axi_clk: + clk_disable_unprepare(spi->axi_clk); out_rel_clk: clk_disable_unprepare(spi->clk); out: @@ -738,6 +751,7 @@ static int orion_spi_remove(struct platform_device *pdev) struct orion_spi *spi = spi_master_get_devdata(master); pm_runtime_get_sync(&pdev->dev); + clk_disable_unprepare(spi->axi_clk); clk_disable_unprepare(spi->clk); spi_unregister_master(master); @@ -754,6 +768,7 @@ static int orion_spi_runtime_suspend(struct device *dev) struct spi_master *master = dev_get_drvdata(dev); struct orion_spi *spi = spi_master_get_devdata(master); + clk_disable_unprepare(spi->axi_clk); clk_disable_unprepare(spi->clk); return 0; } @@ -763,6 +778,8 @@ static int orion_spi_runtime_resume(struct device *dev) struct spi_master *master = dev_get_drvdata(dev); struct orion_spi *spi = spi_master_get_devdata(master); + if (!IS_ERR(spi->axi_clk)) + clk_prepare_enable(spi->axi_clk); return clk_prepare_enable(spi->clk); } #endif |