diff options
45 files changed, 5042 insertions, 662 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes index 90fdf935aa5e..13e31c6a0e9c 100644 --- a/Documentation/ABI/testing/sysfs-class-firmware-attributes +++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes @@ -161,6 +161,15 @@ Description: power-on: Representing a password required to use the system + system-mgmt: + Representing System Management password. + See Lenovo extensions section for details + HDD: + Representing HDD password + See Lenovo extensions section for details + NVMe: + Representing NVMe password + See Lenovo extensions section for details mechanism: The means of authentication. This attribute is mandatory. @@ -207,6 +216,13 @@ Description: On Lenovo systems the following additional settings are available: + role: system-mgmt This gives the same authority as the bios-admin password to control + security related features. The authorities allocated can be set via + the BIOS menu SMP Access Control Policy + + role: HDD & NVMe This password is used to unlock access to the drive at boot. Note see + 'level' and 'index' extensions below. + lenovo_encoding: The encoding method that is used. This can be either "ascii" or "scancode". Default is set to "ascii" @@ -216,6 +232,22 @@ Description: two char code (e.g. "us", "fr", "gr") and may vary per platform. Default is set to "us" + level: + Available for HDD and NVMe authentication to set 'user' or 'master' + privilege level. + If only the user password is configured then this should be used to + unlock the drive at boot. If both master and user passwords are set + then either can be used. If a master password is set a user password + is required. + This attribute defaults to 'user' level + + index: + Used with HDD and NVME authentication to set the drive index + that is being referenced (e.g hdd0, hdd1 etc) + This attribute defaults to device 0. + + + What: /sys/class/firmware-attributes/*/attributes/pending_reboot Date: February 2021 KernelVersion: 5.11 diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index a0b2a4280e38..fde21d900420 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -455,6 +455,20 @@ Description: "Unknown", "Charging", "Discharging", "Not charging", "Full" +What: /sys/class/power_supply/<supply_name>/charge_behaviour +Date: November 2021 +Contact: linux-pm@vger.kernel.org +Description: + Represents the charging behaviour. + + Access: Read, Write + + Valid values: + ================ ==================================== + auto: Charge normally, respect thresholds + inhibit-charge: Do not charge while AC is attached + force-discharge: Force discharge while AC is attached + What: /sys/class/power_supply/<supply_name>/technology Date: May 2007 Contact: linux-pm@vger.kernel.org diff --git a/MAINTAINERS b/MAINTAINERS index 2e8a3405a033..174480e5bd01 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3013,6 +3013,13 @@ W: http://acpi4asus.sf.net F: drivers/platform/x86/asus*.c F: drivers/platform/x86/eeepc*.c +ASUS TF103C DOCK DRIVER +M: Hans de Goede <hdegoede@redhat.com> +L: platform-driver-x86@vger.kernel.org +S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git +F: drivers/platform/x86/asus-tf103c-dock.c + ASUS WMI HARDWARE MONITOR DRIVER M: Ed Brindley <kernel@maidavale.org> M: Denis Pauk <pauk.denis@gmail.com> @@ -20836,6 +20843,13 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/mm F: arch/x86/mm/ +X86 PLATFORM ANDROID TABLETS DSDT FIXUP DRIVER +M: Hans de Goede <hdegoede@redhat.com> +L: platform-driver-x86@vger.kernel.org +S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git +F: drivers/platform/x86/x86-android-tablets.c + X86 PLATFORM DRIVERS M: Hans de Goede <hdegoede@redhat.com> M: Mark Gross <markgross@kernel.org> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index ed800f5da7d8..ac6688d7a3f4 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -879,4 +879,7 @@ source "drivers/leds/flash/Kconfig" comment "LED Triggers" source "drivers/leds/trigger/Kconfig" +comment "Simple LED drivers" +source "drivers/leds/simple/Kconfig" + endif # NEW_LEDS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index c636ec069612..1a719caf14c0 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -105,3 +105,6 @@ obj-$(CONFIG_LEDS_TRIGGERS) += trigger/ # LED Blink obj-y += blink/ + +# Simple LED drivers +obj-y += simple/ diff --git a/drivers/leds/simple/Kconfig b/drivers/leds/simple/Kconfig new file mode 100644 index 000000000000..9f6a68336659 --- /dev/null +++ b/drivers/leds/simple/Kconfig @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only +config LEDS_SIEMENS_SIMATIC_IPC + tristate "LED driver for Siemens Simatic IPCs" + depends on LEDS_CLASS + depends on SIEMENS_SIMATIC_IPC + help + This option enables support for the LEDs of several Industrial PCs + from Siemens. + + To compile this driver as a module, choose M here: the module + will be called simatic-ipc-leds. diff --git a/drivers/leds/simple/Makefile b/drivers/leds/simple/Makefile new file mode 100644 index 000000000000..8481f1e9e360 --- /dev/null +++ b/drivers/leds/simple/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC) += simatic-ipc-leds.o diff --git a/drivers/leds/simple/simatic-ipc-leds.c b/drivers/leds/simple/simatic-ipc-leds.c new file mode 100644 index 000000000000..ff2c96e73241 --- /dev/null +++ b/drivers/leds/simple/simatic-ipc-leds.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Siemens SIMATIC IPC driver for LEDs + * + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Henning Schild <henning.schild@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> + * Gerd Haeussler <gerd.haeussler.ext@siemens.com> + */ + +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_data/x86/simatic-ipc-base.h> +#include <linux/platform_device.h> +#include <linux/sizes.h> +#include <linux/spinlock.h> + +#define SIMATIC_IPC_LED_PORT_BASE 0x404E + +struct simatic_ipc_led { + unsigned int value; /* mask for io and offset for mem */ + char *name; + struct led_classdev cdev; +}; + +static struct simatic_ipc_led simatic_ipc_leds_io[] = { + {1 << 15, "green:" LED_FUNCTION_STATUS "-1" }, + {1 << 7, "yellow:" LED_FUNCTION_STATUS "-1" }, + {1 << 14, "red:" LED_FUNCTION_STATUS "-2" }, + {1 << 6, "yellow:" LED_FUNCTION_STATUS "-2" }, + {1 << 13, "red:" LED_FUNCTION_STATUS "-3" }, + {1 << 5, "yellow:" LED_FUNCTION_STATUS "-3" }, + { } +}; + +/* the actual start will be discovered with PCI, 0 is a placeholder */ +struct resource simatic_ipc_led_mem_res = DEFINE_RES_MEM_NAMED(0, SZ_4K, KBUILD_MODNAME); + +static void *simatic_ipc_led_memory; + +static struct simatic_ipc_led simatic_ipc_leds_mem[] = { + {0x500 + 0x1A0, "red:" LED_FUNCTION_STATUS "-1"}, + {0x500 + 0x1A8, "green:" LED_FUNCTION_STATUS "-1"}, + {0x500 + 0x1C8, "red:" LED_FUNCTION_STATUS "-2"}, + {0x500 + 0x1D0, "green:" LED_FUNCTION_STATUS "-2"}, + {0x500 + 0x1E0, "red:" LED_FUNCTION_STATUS "-3"}, + {0x500 + 0x198, "green:" LED_FUNCTION_STATUS "-3"}, + { } +}; + +static struct resource simatic_ipc_led_io_res = + DEFINE_RES_IO_NAMED(SIMATIC_IPC_LED_PORT_BASE, SZ_2, KBUILD_MODNAME); + +static DEFINE_SPINLOCK(reg_lock); + +static inline struct simatic_ipc_led *cdev_to_led(struct led_classdev *led_cd) +{ + return container_of(led_cd, struct simatic_ipc_led, cdev); +} + +static void simatic_ipc_led_set_io(struct led_classdev *led_cd, + enum led_brightness brightness) +{ + struct simatic_ipc_led *led = cdev_to_led(led_cd); + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(®_lock, flags); + + val = inw(SIMATIC_IPC_LED_PORT_BASE); + if (brightness == LED_OFF) + outw(val | led->value, SIMATIC_IPC_LED_PORT_BASE); + else + outw(val & ~led->value, SIMATIC_IPC_LED_PORT_BASE); + + spin_unlock_irqrestore(®_lock, flags); +} + +static enum led_brightness simatic_ipc_led_get_io(struct led_classdev *led_cd) +{ + struct simatic_ipc_led *led = cdev_to_led(led_cd); + + return inw(SIMATIC_IPC_LED_PORT_BASE) & led->value ? LED_OFF : led_cd->max_brightness; +} + +static void simatic_ipc_led_set_mem(struct led_classdev *led_cd, + enum led_brightness brightness) +{ + struct simatic_ipc_led *led = cdev_to_led(led_cd); + + u32 *p; + + p = simatic_ipc_led_memory + led->value; + *p = (*p & ~1) | (brightness == LED_OFF); +} + +static enum led_brightness simatic_ipc_led_get_mem(struct led_classdev *led_cd) +{ + struct simatic_ipc_led *led = cdev_to_led(led_cd); + + u32 *p; + + p = simatic_ipc_led_memory + led->value; + return (*p & 1) ? LED_OFF : led_cd->max_brightness; +} + +static int simatic_ipc_leds_probe(struct platform_device *pdev) +{ + const struct simatic_ipc_platform *plat = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct simatic_ipc_led *ipcled; + struct led_classdev *cdev; + struct resource *res; + int err, type; + u32 *p; + + switch (plat->devmode) { + case SIMATIC_IPC_DEVICE_227D: + case SIMATIC_IPC_DEVICE_427E: + res = &simatic_ipc_led_io_res; + ipcled = simatic_ipc_leds_io; + /* on 227D the two bytes work the other way araound */ + if (plat->devmode == SIMATIC_IPC_DEVICE_227D) { + while (ipcled->value) { + ipcled->value = swab16(ipcled->value); + ipcled++; + } + ipcled = simatic_ipc_leds_io; + } + type = IORESOURCE_IO; + if (!devm_request_region(dev, res->start, resource_size(res), KBUILD_MODNAME)) { + dev_err(dev, "Unable to register IO resource at %pR\n", res); + return -EBUSY; + } + break; + case SIMATIC_IPC_DEVICE_127E: + res = &simatic_ipc_led_mem_res; + ipcled = simatic_ipc_leds_mem; + type = IORESOURCE_MEM; + + /* get GPIO base from PCI */ + res->start = simatic_ipc_get_membase0(PCI_DEVFN(13, 0)); + if (res->start == 0) + return -ENODEV; + + /* do the final address calculation */ + res->start = res->start + (0xC5 << 16); + res->end += res->start; + + simatic_ipc_led_memory = devm_ioremap_resource(dev, res); + if (IS_ERR(simatic_ipc_led_memory)) + return PTR_ERR(simatic_ipc_led_memory); + + /* initialize power/watchdog LED */ + p = simatic_ipc_led_memory + 0x500 + 0x1D8; /* PM_WDT_OUT */ + *p = (*p & ~1); + p = simatic_ipc_led_memory + 0x500 + 0x1C0; /* PM_BIOS_BOOT_N */ + *p = (*p | 1); + + break; + default: + return -ENODEV; + } + + while (ipcled->value) { + cdev = &ipcled->cdev; + if (type == IORESOURCE_MEM) { + cdev->brightness_set = simatic_ipc_led_set_mem; + cdev->brightness_get = simatic_ipc_led_get_mem; + } else { + cdev->brightness_set = simatic_ipc_led_set_io; + cdev->brightness_get = simatic_ipc_led_get_io; + } + cdev->max_brightness = LED_ON; + cdev->name = ipcled->name; + + err = devm_led_classdev_register(dev, cdev); + if (err < 0) + return err; + ipcled++; + } + + return 0; +} + +static struct platform_driver simatic_ipc_led_driver = { + .probe = simatic_ipc_leds_probe, + .driver = { + .name = KBUILD_MODNAME, + } +}; + +module_platform_driver(simatic_ipc_led_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" KBUILD_MODNAME); +MODULE_AUTHOR("Henning Schild <henning.schild@siemens.com>"); diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig index 3105f651614f..5f0578e25f71 100644 --- a/drivers/platform/surface/Kconfig +++ b/drivers/platform/surface/Kconfig @@ -5,7 +5,6 @@ menuconfig SURFACE_PLATFORMS bool "Microsoft Surface Platform-Specific Device Drivers" - depends on ACPI default y help Say Y here to get to see options for platform-specific device drivers @@ -30,12 +29,14 @@ config SURFACE3_WMI config SURFACE_3_BUTTON tristate "Power/home/volume buttons driver for Microsoft Surface 3 tablet" + depends on ACPI depends on KEYBOARD_GPIO && I2C help This driver handles the power/home/volume buttons on the Microsoft Surface 3 tablet. config SURFACE_3_POWER_OPREGION tristate "Surface 3 battery platform operation region support" + depends on ACPI depends on I2C help This driver provides support for ACPI operation @@ -126,6 +127,7 @@ config SURFACE_DTX config SURFACE_GPE tristate "Surface GPE/Lid Support Driver" + depends on ACPI depends on DMI help This driver marks the GPEs related to the ACPI lid device found on @@ -135,6 +137,7 @@ config SURFACE_GPE config SURFACE_HOTPLUG tristate "Surface Hot-Plug Driver" + depends on ACPI depends on GPIOLIB help Driver for out-of-band hot-plug event signaling on Microsoft Surface @@ -154,6 +157,7 @@ config SURFACE_HOTPLUG config SURFACE_PLATFORM_PROFILE tristate "Surface Platform Profile Driver" + depends on ACPI depends on SURFACE_AGGREGATOR_REGISTRY select ACPI_PLATFORM_PROFILE help @@ -176,6 +180,7 @@ config SURFACE_PLATFORM_PROFILE config SURFACE_PRO3_BUTTON tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3/4 tablet" + depends on ACPI depends on INPUT help This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3/4 tablet. diff --git a/drivers/platform/surface/aggregator/Kconfig b/drivers/platform/surface/aggregator/Kconfig index fd6dc452f3e8..cab020324256 100644 --- a/drivers/platform/surface/aggregator/Kconfig +++ b/drivers/platform/surface/aggregator/Kconfig @@ -4,6 +4,7 @@ menuconfig SURFACE_AGGREGATOR tristate "Microsoft Surface System Aggregator Module Subsystem and Drivers" depends on SERIAL_DEV_BUS + depends on ACPI select CRC_CCITT help The Surface System Aggregator Module (Surface SAM or SSAM) is an diff --git a/drivers/platform/surface/aggregator/bus.c b/drivers/platform/surface/aggregator/bus.c index 0a40dd9c94ed..abbbb5b08b07 100644 --- a/drivers/platform/surface/aggregator/bus.c +++ b/drivers/platform/surface/aggregator/bus.c @@ -374,27 +374,19 @@ static int ssam_remove_device(struct device *dev, void *_data) } /** - * ssam_controller_remove_clients() - Remove SSAM client devices registered as - * direct children under the given controller. - * @ctrl: The controller to remove all direct clients for. + * ssam_remove_clients() - Remove SSAM client devices registered as direct + * children under the given parent device. + * @dev: The (parent) device to remove all direct clients for. * - * Remove all SSAM client devices registered as direct children under the - * given controller. Note that this only accounts for direct children of the - * controller device. This does not take care of any client devices where the - * parent device has been manually set before calling ssam_device_add. Refer - * to ssam_device_add()/ssam_device_remove() for more details on those cases. - * - * To avoid new devices being added in parallel to this call, the main - * controller lock (not statelock) must be held during this (and if - * necessary, any subsequent deinitialization) call. + * Remove all SSAM client devices registered as direct children under the given + * device. Note that this only accounts for direct children of the device. + * Refer to ssam_device_add()/ssam_device_remove() for more details. */ -void ssam_controller_remove_clients(struct ssam_controller *ctrl) +void ssam_remove_clients(struct device *dev) { - struct device *dev; - - dev = ssam_controller_device(ctrl); device_for_each_child_reverse(dev, NULL, ssam_remove_device); } +EXPORT_SYMBOL_GPL(ssam_remove_clients); /** * ssam_bus_register() - Register and set-up the SSAM client device bus. diff --git a/drivers/platform/surface/aggregator/bus.h b/drivers/platform/surface/aggregator/bus.h index ed032c2cbdb2..6964ee84e79c 100644 --- a/drivers/platform/surface/aggregator/bus.h +++ b/drivers/platform/surface/aggregator/bus.h @@ -12,14 +12,11 @@ #ifdef CONFIG_SURFACE_AGGREGATOR_BUS -void ssam_controller_remove_clients(struct ssam_controller *ctrl); - int ssam_bus_register(void); void ssam_bus_unregister(void); #else /* CONFIG_SURFACE_AGGREGATOR_BUS */ -static inline void ssam_controller_remove_clients(struct ssam_controller *ctrl) {} static inline int ssam_bus_register(void) { return 0; } static inline void ssam_bus_unregister(void) {} diff --git a/drivers/platform/surface/aggregator/core.c b/drivers/platform/surface/aggregator/core.c index c61bbeeec2df..d384d36098c2 100644 --- a/drivers/platform/surface/aggregator/core.c +++ b/drivers/platform/surface/aggregator/core.c @@ -22,6 +22,7 @@ #include <linux/sysfs.h> #include <linux/surface_aggregator/controller.h> +#include <linux/surface_aggregator/device.h> #include "bus.h" #include "controller.h" @@ -735,7 +736,7 @@ static void ssam_serial_hub_remove(struct serdev_device *serdev) ssam_controller_lock(ctrl); /* Remove all client devices. */ - ssam_controller_remove_clients(ctrl); + ssam_remove_clients(&serdev->dev); /* Act as if suspending to silence events. */ status = ssam_ctrl_notif_display_off(ctrl); diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index e70f4c63554e..ce2bd88feeaa 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -258,20 +258,6 @@ static int ssam_uid_from_string(const char *str, struct ssam_device_uid *uid) return 0; } -static int ssam_hub_remove_devices_fn(struct device *dev, void *data) -{ - if (!is_ssam_device(dev)) - return 0; - - ssam_device_remove(to_ssam_device(dev)); - return 0; -} - -static void ssam_hub_remove_devices(struct device *parent) -{ - device_for_each_child_reverse(parent, NULL, ssam_hub_remove_devices_fn); -} - static int ssam_hub_add_device(struct device *parent, struct ssam_controller *ctrl, struct fwnode_handle *node) { @@ -297,8 +283,8 @@ static int ssam_hub_add_device(struct device *parent, struct ssam_controller *ct return status; } -static int ssam_hub_add_devices(struct device *parent, struct ssam_controller *ctrl, - struct fwnode_handle *node) +static int ssam_hub_register_clients(struct device *parent, struct ssam_controller *ctrl, + struct fwnode_handle *node) { struct fwnode_handle *child; int status; @@ -317,7 +303,7 @@ static int ssam_hub_add_devices(struct device *parent, struct ssam_controller *c return 0; err: - ssam_hub_remove_devices(parent); + ssam_remove_clients(parent); return status; } @@ -412,9 +398,9 @@ static void ssam_base_hub_update_workfn(struct work_struct *work) hub->state = state; if (hub->state == SSAM_BASE_HUB_CONNECTED) - status = ssam_hub_add_devices(&hub->sdev->dev, hub->sdev->ctrl, node); + status = ssam_hub_register_clients(&hub->sdev->dev, hub->sdev->ctrl, node); else - ssam_hub_remove_devices(&hub->sdev->dev); + ssam_remove_clients(&hub->sdev->dev); if (status) dev_err(&hub->sdev->dev, "failed to update base-hub devices: %d\n", status); @@ -496,7 +482,7 @@ static int ssam_base_hub_probe(struct ssam_device *sdev) err: ssam_notifier_unregister(sdev->ctrl, &hub->notif); cancel_delayed_work_sync(&hub->update_work); - ssam_hub_remove_devices(&sdev->dev); + ssam_remove_clients(&sdev->dev); return status; } @@ -508,7 +494,7 @@ static void ssam_base_hub_remove(struct ssam_device *sdev) ssam_notifier_unregister(sdev->ctrl, &hub->notif); cancel_delayed_work_sync(&hub->update_work); - ssam_hub_remove_devices(&sdev->dev); + ssam_remove_clients(&sdev->dev); } static const struct ssam_device_id ssam_base_hub_match[] = { @@ -611,7 +597,7 @@ static int ssam_platform_hub_probe(struct platform_device *pdev) set_secondary_fwnode(&pdev->dev, root); - status = ssam_hub_add_devices(&pdev->dev, ctrl, root); + status = ssam_hub_register_clients(&pdev->dev, ctrl, root); if (status) { set_secondary_fwnode(&pdev->dev, NULL); software_node_unregister_node_group(nodes); @@ -625,7 +611,7 @@ static int ssam_platform_hub_remove(struct platform_device *pdev) { const struct software_node **nodes = platform_get_drvdata(pdev); - ssam_hub_remove_devices(&pdev->dev); + ssam_remove_clients(&pdev->dev); set_secondary_fwnode(&pdev->dev, NULL); software_node_unregister_node_group(nodes); return 0; diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 97e87628eb35..24deeeb29af2 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -127,6 +127,19 @@ config GIGABYTE_WMI To compile this driver as a module, choose M here: the module will be called gigabyte-wmi. +config YOGABOOK_WMI + tristate "Lenovo Yoga Book tablet WMI key driver" + depends on ACPI_WMI + depends on INPUT + select LEDS_CLASS + select NEW_LEDS + help + Say Y here if you want to support the 'Pen' key and keyboard backlight + control on the Lenovo Yoga Book tablets. + + To compile this driver as a module, choose M here: the module will + be called lenovo-yogabook-wmi. + config ACERHDF tristate "Acer Aspire One temperature and fan driver" depends on ACPI && THERMAL @@ -296,6 +309,25 @@ config ASUS_NB_WMI If you have an ACPI-WMI compatible Asus Notebook, say Y or M here. +config ASUS_TF103C_DOCK + tristate "Asus TF103C 2-in-1 keyboard dock" + depends on ACPI + depends on I2C + depends on INPUT + depends on HID + depends on GPIOLIB + help + This is a driver for the keyboard, touchpad and USB port of the + keyboard dock for the Asus TF103C 2-in-1 tablet. + + This keyboard dock has its own I2C attached embedded controller + and the keyboard and touchpad are also connected over I2C, + instead of using the usual USB connection. This means that the + keyboard dock requires this special driver to function. + + If you have an Asus TF103C tablet say Y or M here, for a generic x86 + distro config say M here. + config MERAKI_MX100 tristate "Cisco Meraki MX100 Platform Driver" depends on GPIOLIB @@ -993,6 +1025,23 @@ config TOUCHSCREEN_DMI the OS-image for the device. This option supplies the missing info. Enable this for x86 tablets with Silead or Chipone touchscreens. +config X86_ANDROID_TABLETS + tristate "X86 Android tablet support" + depends on I2C && SERIAL_DEV_BUS && ACPI && GPIOLIB + help + X86 tablets which ship with Android as (part of) the factory image + typically have various problems with their DSDTs. The factory kernels + shipped on these devices typically have device addresses and GPIOs + hardcoded in the kernel, rather than specified in their DSDT. + + With the DSDT containing a random collection of devices which may or + may not actually be present. This driver contains various fixes for + such tablets, including instantiating kernel devices for devices which + are missing from the DSDT. + + If you have a x86 Android tablet say Y or M here, for a generic x86 + distro config say M here. + config FW_ATTR_CLASS tristate @@ -1077,6 +1126,18 @@ config INTEL_SCU_IPC_UTIL low level access for debug work and updating the firmware. Say N unless you will be doing this on an Intel MID platform. +config SIEMENS_SIMATIC_IPC + tristate "Siemens Simatic IPC Class driver" + depends on PCI + help + This Simatic IPC class driver is the central of several drivers. It + is mainly used for system identification, after which drivers in other + classes will take care of driving specifics of those machines. + i.e. LEDs and watchdog. + + To compile this driver as a module, choose M here: the module + will be called simatic-ipc. + endif # X86_PLATFORM_DEVICES config PMC_ATOM diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 253a096b5dd8..c12a9b044fd8 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_NVIDIA_WMI_EC_BACKLIGHT) += nvidia-wmi-ec-backlight.o obj-$(CONFIG_PEAQ_WMI) += peaq-wmi.o obj-$(CONFIG_XIAOMI_WMI) += xiaomi-wmi.o obj-$(CONFIG_GIGABYTE_WMI) += gigabyte-wmi.o +obj-$(CONFIG_YOGABOOK_WMI) += lenovo-yogabook-wmi.o # Acer obj-$(CONFIG_ACERHDF) += acerhdf.o @@ -35,6 +36,7 @@ obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o obj-$(CONFIG_ASUS_WIRELESS) += asus-wireless.o obj-$(CONFIG_ASUS_WMI) += asus-wmi.o obj-$(CONFIG_ASUS_NB_WMI) += asus-nb-wmi.o +obj-$(CONFIG_ASUS_TF103C_DOCK) += asus-tf103c-dock.o obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o obj-$(CONFIG_EEEPC_WMI) += eeepc-wmi.o @@ -112,6 +114,7 @@ obj-$(CONFIG_I2C_MULTI_INSTANTIATE) += i2c-multi-instantiate.o obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o +obj-$(CONFIG_X86_ANDROID_TABLETS) += x86-android-tablets.o # Intel uncore drivers obj-$(CONFIG_INTEL_IPS) += intel_ips.o @@ -123,3 +126,6 @@ obj-$(CONFIG_INTEL_SCU_PLATFORM) += intel_scu_pltdrv.o obj-$(CONFIG_INTEL_SCU_WDT) += intel_scu_wdt.o obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o obj-$(CONFIG_PMC_ATOM) += pmc_atom.o + +# Siemens Simatic Industrial PCs +obj-$(CONFIG_SIEMENS_SIMATIC_IPC) += simatic-ipc.o diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c index 230593ae5d6d..f794343d6aaa 100644 --- a/drivers/platform/x86/amd-pmc.c +++ b/drivers/platform/x86/amd-pmc.c @@ -35,6 +35,12 @@ #define AMD_PMC_SCRATCH_REG_CZN 0x94 #define AMD_PMC_SCRATCH_REG_YC 0xD14 +/* STB Registers */ +#define AMD_PMC_STB_INDEX_ADDRESS 0xF8 +#define AMD_PMC_STB_INDEX_DATA 0xFC +#define AMD_PMC_STB_PMI_0 0x03E30600 +#define AMD_PMC_STB_PREDEF 0xC6000001 + /* Base address of SMU for mapping physical address to virtual address */ #define AMD_PMC_SMU_INDEX_ADDRESS 0xB8 #define AMD_PMC_SMU_INDEX_DATA 0xBC @@ -82,6 +88,7 @@ #define SOC_SUBSYSTEM_IP_MAX 12 #define DELAY_MIN_US 2000 #define DELAY_MAX_US 3000 +#define FIFO_SIZE 4096 enum amd_pmc_def { MSG_TEST = 0x01, MSG_OS_HINT_PCO, @@ -121,14 +128,21 @@ struct amd_pmc_dev { u16 minor; u16 rev; struct device *dev; + struct pci_dev *rdev; struct mutex lock; /* generic mutex lock */ #if IS_ENABLED(CONFIG_DEBUG_FS) struct dentry *dbgfs_dir; #endif /* CONFIG_DEBUG_FS */ }; +static bool enable_stb; +module_param(enable_stb, bool, 0644); +MODULE_PARM_DESC(enable_stb, "Enable the STB debug mechanism"); + static struct amd_pmc_dev pmc; static int amd_pmc_send_cmd(struct amd_pmc_dev *dev, u32 arg, u32 *data, u8 msg, bool ret); +static int amd_pmc_write_stb(struct amd_pmc_dev *dev, u32 data); +static int amd_pmc_read_stb(struct amd_pmc_dev *dev, u32 *buf); static inline u32 amd_pmc_reg_read(struct amd_pmc_dev *dev, int reg_offset) { @@ -175,6 +189,50 @@ static int amd_pmc_get_smu_version(struct amd_pmc_dev *dev) return 0; } +static int amd_pmc_stb_debugfs_open(struct inode *inode, struct file *filp) +{ + struct amd_pmc_dev *dev = filp->f_inode->i_private; + u32 size = FIFO_SIZE * sizeof(u32); + u32 *buf; + int rc; + + buf = kzalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + rc = amd_pmc_read_stb(dev, buf); + if (rc) { + kfree(buf); + return rc; + } + + filp->private_data = buf; + return rc; +} + +static ssize_t amd_pmc_stb_debugfs_read(struct file *filp, char __user *buf, size_t size, + loff_t *pos) +{ + if (!filp->private_data) + return -EINVAL; + + return simple_read_from_buffer(buf, size, pos, filp->private_data, + FIFO_SIZE * sizeof(u32)); +} + +static int amd_pmc_stb_debugfs_release(struct inode *inode, struct file *filp) +{ + kfree(filp->private_data); + return 0; +} + +const struct file_operations amd_pmc_stb_debugfs_fops = { + .owner = THIS_MODULE, + .open = amd_pmc_stb_debugfs_open, + .read = amd_pmc_stb_debugfs_read, + .release = amd_pmc_stb_debugfs_release, +}; + static int amd_pmc_idlemask_read(struct amd_pmc_dev *pdev, struct device *dev, struct seq_file *s) { @@ -288,6 +346,10 @@ static void amd_pmc_dbgfs_register(struct amd_pmc_dev *dev) &s0ix_stats_fops); debugfs_create_file("amd_pmc_idlemask", 0644, dev->dbgfs_dir, dev, &amd_pmc_idlemask_fops); + /* Enable STB only when the module_param is set */ + if (enable_stb) + debugfs_create_file("stb_read", 0644, dev->dbgfs_dir, dev, + &amd_pmc_stb_debugfs_fops); } #else static inline void amd_pmc_dbgfs_register(struct amd_pmc_dev *dev) @@ -484,6 +546,13 @@ static int __maybe_unused amd_pmc_suspend(struct device *dev) if (rc) dev_err(pdev->dev, "suspend failed\n"); + if (enable_stb) + rc = amd_pmc_write_stb(pdev, AMD_PMC_STB_PREDEF); + if (rc) { + dev_err(pdev->dev, "error writing to STB\n"); + return rc; + } + return rc; } @@ -504,6 +573,14 @@ static int __maybe_unused amd_pmc_resume(struct device *dev) /* Dump the IdleMask to see the blockers */ amd_pmc_idlemask_read(pdev, dev, NULL); + /* Write data incremented by 1 to distinguish in stb_read */ + if (enable_stb) + rc = amd_pmc_write_stb(pdev, AMD_PMC_STB_PREDEF + 1); + if (rc) { + dev_err(pdev->dev, "error writing to STB\n"); + return rc; + } + return 0; } @@ -521,6 +598,50 @@ static const struct pci_device_id pmc_pci_ids[] = { { } }; +static int amd_pmc_write_stb(struct amd_pmc_dev *dev, u32 data) +{ + int err; + + err = pci_write_config_dword(dev->rdev, AMD_PMC_STB_INDEX_ADDRESS, AMD_PMC_STB_PMI_0); + if (err) { + dev_err(dev->dev, "failed to write addr in stb: 0x%X\n", + AMD_PMC_STB_INDEX_ADDRESS); + return pcibios_err_to_errno(err); + } + + err = pci_write_config_dword(dev->rdev, AMD_PMC_STB_INDEX_DATA, data); + if (err) { + dev_err(dev->dev, "failed to write data in stb: 0x%X\n", + AMD_PMC_STB_INDEX_DATA); + return pcibios_err_to_errno(err); + } + + return 0; +} + +static int amd_pmc_read_stb(struct amd_pmc_dev *dev, u32 *buf) +{ + int i, err; + + err = pci_write_config_dword(dev->rdev, AMD_PMC_STB_INDEX_ADDRESS, AMD_PMC_STB_PMI_0); + if (err) { + dev_err(dev->dev, "error writing addr to stb: 0x%X\n", + AMD_PMC_STB_INDEX_ADDRESS); + return pcibios_err_to_errno(err); + } + + for (i = 0; i < FIFO_SIZE; i++) { + err = pci_read_config_dword(dev->rdev, AMD_PMC_STB_INDEX_DATA, buf++); + if (err) { + dev_err(dev->dev, "error reading data from stb: 0x%X\n", + AMD_PMC_STB_INDEX_DATA); + return pcibios_err_to_errno(err); + } + } + + return 0; +} + static int amd_pmc_probe(struct platform_device *pdev) { struct amd_pmc_dev *dev = &pmc; @@ -534,22 +655,23 @@ static int amd_pmc_probe(struct platform_device *pdev) rdev = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0)); if (!rdev || !pci_match_id(pmc_pci_ids, rdev)) { - pci_dev_put(rdev); - return -ENODEV; + err = -ENODEV; + goto err_pci_dev_put; } dev->cpu_id = rdev->device; + dev->rdev = rdev; err = pci_write_config_dword(rdev, AMD_PMC_SMU_INDEX_ADDRESS, AMD_PMC_BASE_ADDR_LO); if (err) { dev_err(dev->dev, "error writing to 0x%x\n", AMD_PMC_SMU_INDEX_ADDRESS); - pci_dev_put(rdev); - return pcibios_err_to_errno(err); + err = pcibios_err_to_errno(err); + goto err_pci_dev_put; } err = pci_read_config_dword(rdev, AMD_PMC_SMU_INDEX_DATA, &val); if (err) { - pci_dev_put(rdev); - return pcibios_err_to_errno(err); + err = pcibios_err_to_errno(err); + goto err_pci_dev_put; } base_addr_lo = val & AMD_PMC_BASE_ADDR_HI_MASK; @@ -557,24 +679,25 @@ static int amd_pmc_probe(struct platform_device *pdev) err = pci_write_config_dword(rdev, AMD_PMC_SMU_INDEX_ADDRESS, AMD_PMC_BASE_ADDR_HI); if (err) { dev_err(dev->dev, "error writing to 0x%x\n", AMD_PMC_SMU_INDEX_ADDRESS); - pci_dev_put(rdev); - return pcibios_err_to_errno(err); + err = pcibios_err_to_errno(err); + goto err_pci_dev_put; } err = pci_read_config_dword(rdev, AMD_PMC_SMU_INDEX_DATA, &val); if (err) { - pci_dev_put(rdev); - return pcibios_err_to_errno(err); + err = pcibios_err_to_errno(err); + goto err_pci_dev_put; } base_addr_hi = val & AMD_PMC_BASE_ADDR_LO_MASK; - pci_dev_put(rdev); base_addr = ((u64)base_addr_hi << 32 | base_addr_lo); dev->regbase = devm_ioremap(dev->dev, base_addr + AMD_PMC_BASE_ADDR_OFFSET, AMD_PMC_MAPPING_SIZE); - if (!dev->regbase) - return -ENOMEM; + if (!dev->regbase) { + err = -ENOMEM; + goto err_pci_dev_put; + } mutex_init(&dev->lock); @@ -583,8 +706,10 @@ static int amd_pmc_probe(struct platform_device *pdev) base_addr_hi = FCH_BASE_PHY_ADDR_HIGH; fch_phys_addr = ((u64)base_addr_hi << 32 | base_addr_lo); dev->fch_virt_addr = devm_ioremap(dev->dev, fch_phys_addr, FCH_SSC_MAPPING_SIZE); - if (!dev->fch_virt_addr) - return -ENOMEM; + if (!dev->fch_virt_addr) { + err = -ENOMEM; + goto err_pci_dev_put; + } /* Use SMU to get the s0i3 debug stats */ err = amd_pmc_setup_smu_logging(dev); @@ -595,6 +720,10 @@ static int amd_pmc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dev); amd_pmc_dbgfs_register(dev); return 0; + +err_pci_dev_put: + pci_dev_put(rdev); + return err; } static int amd_pmc_remove(struct platform_device *pdev) @@ -602,6 +731,7 @@ static int amd_pmc_remove(struct platform_device *pdev) struct amd_pmc_dev *dev = platform_get_drvdata(pdev); amd_pmc_dbgfs_unregister(dev); + pci_dev_put(dev->rdev); mutex_destroy(&dev->lock); return 0; } diff --git a/drivers/platform/x86/asus-tf103c-dock.c b/drivers/platform/x86/asus-tf103c-dock.c new file mode 100644 index 000000000000..d4ef8f362ee6 --- /dev/null +++ b/drivers/platform/x86/asus-tf103c-dock.c @@ -0,0 +1,945 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * This is a driver for the keyboard, touchpad and USB port of the + * keyboard dock for the Asus TF103C 2-in-1 tablet. + * + * This keyboard dock has its own I2C attached embedded controller + * and the keyboard and touchpad are also connected over I2C, + * instead of using the usual USB connection. This means that the + * keyboard dock requires this special driver to function. + * + * Copyright (C) 2021 Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> +#include <linux/hid.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/mod_devicetable.h> +#include <linux/moduleparam.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/workqueue.h> +#include <asm/unaligned.h> + +static bool fnlock; +module_param(fnlock, bool, 0644); +MODULE_PARM_DESC(fnlock, + "By default the kbd toprow sends multimedia key presses. AltGr " + "can be pressed to change this to F1-F12. Set this to 1 to " + "change the default. Press AltGr + Esc to toggle at runtime."); + +#define TF103C_DOCK_DEV_NAME "NPCE69A:00" + +#define TF103C_DOCK_HPD_DEBOUNCE msecs_to_jiffies(20) + +/*** Touchpad I2C device defines ***/ +#define TF103C_DOCK_TP_ADDR 0x15 + +/*** Keyboard I2C device defines **A*/ +#define TF103C_DOCK_KBD_ADDR 0x16 + +#define TF103C_DOCK_KBD_DATA_REG 0x73 +#define TF103C_DOCK_KBD_DATA_MIN_LENGTH 4 +#define TF103C_DOCK_KBD_DATA_MAX_LENGTH 11 +#define TF103C_DOCK_KBD_DATA_MODIFIERS 3 +#define TF103C_DOCK_KBD_DATA_KEYS 5 +#define TF103C_DOCK_KBD_CMD_REG 0x75 + +#define TF103C_DOCK_KBD_CMD_ENABLE 0x0800 + +/*** EC innterrupt data I2C device defines ***/ +#define TF103C_DOCK_INTR_ADDR 0x19 +#define TF103C_DOCK_INTR_DATA_REG 0x6a + +#define TF103C_DOCK_INTR_DATA1_OBF_MASK 0x01 +#define TF103C_DOCK_INTR_DATA1_KEY_MASK 0x04 +#define TF103C_DOCK_INTR_DATA1_KBC_MASK 0x08 +#define TF103C_DOCK_INTR_DATA1_AUX_MASK 0x20 +#define TF103C_DOCK_INTR_DATA1_SCI_MASK 0x40 +#define TF103C_DOCK_INTR_DATA1_SMI_MASK 0x80 +/* Special values for the OOB data on kbd_client / tp_client */ +#define TF103C_DOCK_INTR_DATA1_OOB_VALUE 0xc1 +#define TF103C_DOCK_INTR_DATA2_OOB_VALUE 0x04 + +#define TF103C_DOCK_SMI_AC_EVENT 0x31 +#define TF103C_DOCK_SMI_HANDSHAKING 0x50 +#define TF103C_DOCK_SMI_EC_WAKEUP 0x53 +#define TF103C_DOCK_SMI_BOOTBLOCK_RESET 0x5e +#define TF103C_DOCK_SMI_WATCHDOG_RESET 0x5f +#define TF103C_DOCK_SMI_ADAPTER_CHANGE 0x60 +#define TF103C_DOCK_SMI_DOCK_INSERT 0x61 +#define TF103C_DOCK_SMI_DOCK_REMOVE 0x62 +#define TF103C_DOCK_SMI_PAD_BL_CHANGE 0x63 +#define TF103C_DOCK_SMI_HID_STATUS_CHANGED 0x64 +#define TF103C_DOCK_SMI_HID_WAKEUP 0x65 +#define TF103C_DOCK_SMI_S3 0x83 +#define TF103C_DOCK_SMI_S5 0x85 +#define TF103C_DOCK_SMI_NOTIFY_SHUTDOWN 0x90 +#define TF103C_DOCK_SMI_RESUME 0x91 + +/*** EC (dockram) I2C device defines ***/ +#define TF103C_DOCK_EC_ADDR 0x1b + +#define TF103C_DOCK_EC_CMD_REG 0x0a +#define TF103C_DOCK_EC_CMD_LEN 9 + +enum { + TF103C_DOCK_FLAG_HID_OPEN, +}; + +struct tf103c_dock_data { + struct delayed_work hpd_work; + struct irq_chip tp_irqchip; + struct irq_domain *tp_irq_domain; + struct i2c_client *ec_client; + struct i2c_client *intr_client; + struct i2c_client *kbd_client; + struct i2c_client *tp_client; + struct gpio_desc *pwr_en; + struct gpio_desc *irq_gpio; + struct gpio_desc *hpd_gpio; + struct input_dev *input; + struct hid_device *hid; + unsigned long flags; + int board_rev; + int irq; + int hpd_irq; + int tp_irq; + int last_press_0x13; + int last_press_0x14; + bool enabled; + bool tp_enabled; + bool altgr_pressed; + bool esc_pressed; + bool filter_esc; + u8 kbd_buf[TF103C_DOCK_KBD_DATA_MAX_LENGTH]; +}; + +static struct gpiod_lookup_table tf103c_dock_gpios = { + .dev_id = "i2c-" TF103C_DOCK_DEV_NAME, + .table = { + GPIO_LOOKUP("INT33FC:00", 55, "dock_pwr_en", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 1, "dock_irq", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 29, "dock_hpd", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio_crystalcove", 2, "board_rev", GPIO_ACTIVE_HIGH), + {} + }, +}; + +/* Byte 0 is the length of the rest of the packet */ +static const u8 tf103c_dock_enable_cmd[9] = { 8, 0x20, 0, 0, 0, 0, 0x20, 0, 0 }; +static const u8 tf103c_dock_usb_enable_cmd[9] = { 8, 0, 0, 0, 0, 0, 0, 0x40, 0 }; +static const u8 tf103c_dock_suspend_cmd[9] = { 8, 0, 0x20, 0, 0, 0x22, 0, 0, 0 }; + +/*** keyboard related code ***/ + +static u8 tf103c_dock_kbd_hid_desc[] = { + 0x05, 0x01, /* Usage Page (Desktop), */ + 0x09, 0x06, /* Usage (Keyboard), */ + 0xA1, 0x01, /* Collection (Application), */ + 0x85, 0x11, /* Report ID (17), */ + 0x95, 0x08, /* Report Count (8), */ + 0x75, 0x01, /* Report Size (1), */ + 0x15, 0x00, /* Logical Minimum (0), */ + 0x25, 0x01, /* Logical Maximum (1), */ + 0x05, 0x07, /* Usage Page (Keyboard), */ + 0x19, 0xE0, /* Usage Minimum (KB Leftcontrol), */ + 0x29, 0xE7, /* Usage Maximum (KB Right GUI), */ + 0x81, 0x02, /* Input (Variable), */ + 0x95, 0x01, /* Report Count (1), */ + 0x75, 0x08, /* Report Size (8), */ + 0x81, 0x01, /* Input (Constant), */ + 0x95, 0x06, /* Report Count (6), */ + 0x75, 0x08, /* Report Size (8), */ + 0x15, 0x00, /* Logical Minimum (0), */ + 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ + 0x05, 0x07, /* Usage Page (Keyboard), */ + 0x19, 0x00, /* Usage Minimum (None), */ + 0x2A, 0xFF, 0x00, /* Usage Maximum (FFh), */ + 0x81, 0x00, /* Input, */ + 0xC0 /* End Collection */ +}; + +static int tf103c_dock_kbd_read(struct tf103c_dock_data *dock) +{ + struct i2c_client *client = dock->kbd_client; + struct device *dev = &dock->ec_client->dev; + struct i2c_msg msgs[2]; + u8 reg[2]; + int ret; + + reg[0] = TF103C_DOCK_KBD_DATA_REG & 0xff; + reg[1] = TF103C_DOCK_KBD_DATA_REG >> 8; + + msgs[0].addr = client->addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(reg); + msgs[0].buf = reg; + + msgs[1].addr = client->addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = TF103C_DOCK_KBD_DATA_MAX_LENGTH; + msgs[1].buf = dock->kbd_buf; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret != ARRAY_SIZE(msgs)) { + dev_err(dev, "error %d reading kbd data\n", ret); + return -EIO; + } + + return 0; +} + +static void tf103c_dock_kbd_write(struct tf103c_dock_data *dock, u16 cmd) +{ + struct device *dev = &dock->ec_client->dev; + u8 buf[4]; + int ret; + + put_unaligned_le16(TF103C_DOCK_KBD_CMD_REG, &buf[0]); + put_unaligned_le16(cmd, &buf[2]); + + ret = i2c_master_send(dock->kbd_client, buf, sizeof(buf)); + if (ret != sizeof(buf)) + dev_err(dev, "error %d writing kbd cmd\n", ret); +} + +/* HID ll_driver functions for forwarding input-reports from the kbd_client */ +static int tf103c_dock_hid_parse(struct hid_device *hid) +{ + return hid_parse_report(hid, tf103c_dock_kbd_hid_desc, + sizeof(tf103c_dock_kbd_hid_desc)); +} + +static int tf103c_dock_hid_start(struct hid_device *hid) +{ + return 0; +} + +static void tf103c_dock_hid_stop(struct hid_device *hid) +{ + hid->claimed = 0; +} + +static int tf103c_dock_hid_open(struct hid_device *hid) +{ + struct tf103c_dock_data *dock = hid->driver_data; + + set_bit(TF103C_DOCK_FLAG_HID_OPEN, &dock->flags); + return 0; +} + +static void tf103c_dock_hid_close(struct hid_device *hid) +{ + struct tf103c_dock_data *dock = hid->driver_data; + + clear_bit(TF103C_DOCK_FLAG_HID_OPEN, &dock->flags); +} + +/* Mandatory, but not used */ +static int tf103c_dock_hid_raw_request(struct hid_device *hid, u8 reportnum, + u8 *buf, size_t len, u8 rtype, int reqtype) +{ + return 0; +} + +struct hid_ll_driver tf103c_dock_hid_ll_driver = { + .parse = tf103c_dock_hid_parse, + .start = tf103c_dock_hid_start, + .stop = tf103c_dock_hid_stop, + .open = tf103c_dock_hid_open, + .close = tf103c_dock_hid_close, + .raw_request = tf103c_dock_hid_raw_request, +}; + +static int tf103c_dock_toprow_codes[13][2] = { + /* Normal, AltGr pressed */ + { KEY_POWER, KEY_F1 }, + { KEY_RFKILL, KEY_F2 }, + { KEY_F21, KEY_F3 }, /* Touchpad toggle, userspace expects F21 */ + { KEY_BRIGHTNESSDOWN, KEY_F4 }, + { KEY_BRIGHTNESSUP, KEY_F5 }, + { KEY_CAMERA, KEY_F6 }, + { KEY_CONFIG, KEY_F7 }, + { KEY_PREVIOUSSONG, KEY_F8 }, + { KEY_PLAYPAUSE, KEY_F9 }, + { KEY_NEXTSONG, KEY_F10 }, + { KEY_MUTE, KEY_F11 }, + { KEY_VOLUMEDOWN, KEY_F12 }, + { KEY_VOLUMEUP, KEY_SYSRQ }, +}; + +static void tf103c_dock_report_toprow_kbd_hook(struct tf103c_dock_data *dock) +{ + u8 *esc, *buf = dock->kbd_buf; + int size; + + /* + * Stop AltGr reports from getting reported on the "Asus TF103C Dock + * Keyboard" input_dev, since this gets used as "Fn" key for the toprow + * keys. Instead we report this on the "Asus TF103C Dock Top Row Keys" + * input_dev, when not used to modify the toprow keys. + */ + dock->altgr_pressed = buf[TF103C_DOCK_KBD_DATA_MODIFIERS] & 0x40; + buf[TF103C_DOCK_KBD_DATA_MODIFIERS] &= ~0x40; + + input_report_key(dock->input, KEY_RIGHTALT, dock->altgr_pressed); + input_sync(dock->input); + + /* Toggle fnlock on AltGr + Esc press */ + buf = buf + TF103C_DOCK_KBD_DATA_KEYS; + size = TF103C_DOCK_KBD_DATA_MAX_LENGTH - TF103C_DOCK_KBD_DATA_KEYS; + esc = memchr(buf, 0x29, size); + if (!dock->esc_pressed && esc) { + if (dock->altgr_pressed) { + fnlock = !fnlock; + dock->filter_esc = true; + } + } + if (esc && dock->filter_esc) + *esc = 0; + else + dock->filter_esc = false; + + dock->esc_pressed = esc != NULL; +} + +static void tf103c_dock_toprow_press(struct tf103c_dock_data *dock, int key_code) +{ + /* + * Release AltGr before reporting the toprow key, so that userspace + * sees e.g. just KEY_SUSPEND and not AltGr + KEY_SUSPEND. + */ + if (dock->altgr_pressed) { + input_report_key(dock->input, KEY_RIGHTALT, false); + input_sync(dock->input); + } + + input_report_key(dock->input, key_code, true); + input_sync(dock->input); +} + +static void tf103c_dock_toprow_release(struct tf103c_dock_data *dock, int key_code) +{ + input_report_key(dock->input, key_code, false); + input_sync(dock->input); + + if (dock->altgr_pressed) { + input_report_key(dock->input, KEY_RIGHTALT, true); + input_sync(dock->input); + } +} + +static void tf103c_dock_toprow_event(struct tf103c_dock_data *dock, + int toprow_index, int *last_press) +{ + int key_code, fn = dock->altgr_pressed ^ fnlock; + + if (last_press && *last_press) { + tf103c_dock_toprow_release(dock, *last_press); + *last_press = 0; + } + + if (toprow_index < 0) + return; + + key_code = tf103c_dock_toprow_codes[toprow_index][fn]; + tf103c_dock_toprow_press(dock, key_code); + + if (last_press) + *last_press = key_code; + else + tf103c_dock_toprow_release(dock, key_code); +} + +/* + * The keyboard sends what appears to be standard I2C-HID input-reports, + * except that a 16 bit register address of where the I2C-HID format + * input-reports are stored must be send before reading it in a single + * (I2C repeated-start) I2C transaction. + * + * Its unknown how to get the HID descriptors but they are easy to reconstruct: + * + * Input report id 0x11 is 8 bytes long and contain standard USB HID intf-class, + * Boot Interface Subclass reports. + * Input report id 0x13 is 2 bytes long and sends Consumer Control events + * Input report id 0x14 is 1 byte long and sends System Control events + * + * However the top row keys (where a normal keyboard has F1-F12 + Print-Screen) + * are a mess, using a mix of the 0x13 and 0x14 input reports as well as EC SCI + * events; and these need special handling to allow actually sending F1-F12, + * since the Fn key on the keyboard only works on the cursor keys and the top + * row keys always send their special "Multimedia hotkey" codes. + * + * So only forward the 0x11 reports to HID and handle the top-row keys here. + */ +static void tf103c_dock_kbd_interrupt(struct tf103c_dock_data *dock) +{ + struct device *dev = &dock->ec_client->dev; + u8 *buf = dock->kbd_buf; + int size; + + if (tf103c_dock_kbd_read(dock)) + return; + + size = buf[0] | buf[1] << 8; + if (size < TF103C_DOCK_KBD_DATA_MIN_LENGTH || + size > TF103C_DOCK_KBD_DATA_MAX_LENGTH) { + dev_err(dev, "error reported kbd pkt size %d is out of range %d-%d\n", size, + TF103C_DOCK_KBD_DATA_MIN_LENGTH, + TF103C_DOCK_KBD_DATA_MAX_LENGTH); + return; + } + + switch (buf[2]) { + case 0x11: + if (size != 11) + break; + + tf103c_dock_report_toprow_kbd_hook(dock); + + if (test_bit(TF103C_DOCK_FLAG_HID_OPEN, &dock->flags)) + hid_input_report(dock->hid, HID_INPUT_REPORT, buf + 2, size - 2, 1); + return; + case 0x13: + if (size != 5) + break; + + switch (buf[3] | buf[4] << 8) { + case 0: + tf103c_dock_toprow_event(dock, -1, &dock->last_press_0x13); + return; + case 0x70: + tf103c_dock_toprow_event(dock, 3, &dock->last_press_0x13); + return; + case 0x6f: + tf103c_dock_toprow_event(dock, 4, &dock->last_press_0x13); + return; + case 0xb6: + tf103c_dock_toprow_event(dock, 7, &dock->last_press_0x13); + return; + case 0xcd: + tf103c_dock_toprow_event(dock, 8, &dock->last_press_0x13); + return; + case 0xb5: + tf103c_dock_toprow_event(dock, 9, &dock->last_press_0x13); + return; + case 0xe2: + tf103c_dock_toprow_event(dock, 10, &dock->last_press_0x13); + return; + case 0xea: + tf103c_dock_toprow_event(dock, 11, &dock->last_press_0x13); + return; + case 0xe9: + tf103c_dock_toprow_event(dock, 12, &dock->last_press_0x13); + return; + } + break; + case 0x14: + if (size != 4) + break; + + switch (buf[3]) { + case 0: + tf103c_dock_toprow_event(dock, -1, &dock->last_press_0x14); + return; + case 1: + tf103c_dock_toprow_event(dock, 0, &dock->last_press_0x14); + return; + } + break; + } + + dev_warn(dev, "warning unknown kbd data: %*ph\n", size, buf); +} + +/*** touchpad related code ***/ + +static const struct property_entry tf103c_dock_touchpad_props[] = { + PROPERTY_ENTRY_BOOL("elan,clickpad"), + { } +}; + +static const struct software_node tf103c_dock_touchpad_sw_node = { + .properties = tf103c_dock_touchpad_props, +}; + +/* + * tf103c_enable_touchpad() is only called from the threaded interrupt handler + * and tf103c_disable_touchpad() is only called after the irq is disabled, + * so no locking is necessary. + */ +static void tf103c_dock_enable_touchpad(struct tf103c_dock_data *dock) +{ + struct i2c_board_info board_info = { }; + struct device *dev = &dock->ec_client->dev; + int ret; + + if (dock->tp_enabled) { + /* Happens after resume, the tp needs to be reinitialized */ + ret = device_reprobe(&dock->tp_client->dev); + if (ret) + dev_err_probe(dev, ret, "reprobing tp-client\n"); + return; + } + + strscpy(board_info.type, "elan_i2c", I2C_NAME_SIZE); + board_info.addr = TF103C_DOCK_TP_ADDR; + board_info.dev_name = TF103C_DOCK_DEV_NAME "-tp"; + board_info.irq = dock->tp_irq; + board_info.swnode = &tf103c_dock_touchpad_sw_node; + + dock->tp_client = i2c_new_client_device(dock->ec_client->adapter, &board_info); + if (IS_ERR(dock->tp_client)) { + dev_err(dev, "error %ld creating tp client\n", PTR_ERR(dock->tp_client)); + return; + } + + dock->tp_enabled = true; +} + +static void tf103c_dock_disable_touchpad(struct tf103c_dock_data *dock) +{ + if (!dock->tp_enabled) + return; + + i2c_unregister_device(dock->tp_client); + + dock->tp_enabled = false; +} + +/*** interrupt handling code ***/ +static void tf103c_dock_ec_cmd(struct tf103c_dock_data *dock, const u8 *cmd) +{ + struct device *dev = &dock->ec_client->dev; + int ret; + + ret = i2c_smbus_write_i2c_block_data(dock->ec_client, TF103C_DOCK_EC_CMD_REG, + TF103C_DOCK_EC_CMD_LEN, cmd); + if (ret) + dev_err(dev, "error %d sending %*ph cmd\n", ret, + TF103C_DOCK_EC_CMD_LEN, cmd); +} + +static void tf103c_dock_sci(struct tf103c_dock_data *dock, u8 val) +{ + struct device *dev = &dock->ec_client->dev; + + switch (val) { + case 2: + tf103c_dock_toprow_event(dock, 1, NULL); + return; + case 4: + tf103c_dock_toprow_event(dock, 2, NULL); + return; + case 8: + tf103c_dock_toprow_event(dock, 5, NULL); + return; + case 17: + tf103c_dock_toprow_event(dock, 6, NULL); + return; + } + + dev_warn(dev, "warning unknown SCI value: 0x%02x\n", val); +} + +static void tf103c_dock_smi(struct tf103c_dock_data *dock, u8 val) +{ + struct device *dev = &dock->ec_client->dev; + + switch (val) { + case TF103C_DOCK_SMI_EC_WAKEUP: + tf103c_dock_ec_cmd(dock, tf103c_dock_enable_cmd); + tf103c_dock_ec_cmd(dock, tf103c_dock_usb_enable_cmd); + tf103c_dock_kbd_write(dock, TF103C_DOCK_KBD_CMD_ENABLE); + break; + case TF103C_DOCK_SMI_PAD_BL_CHANGE: + /* There is no backlight, but the EC still sends this */ + break; + case TF103C_DOCK_SMI_HID_STATUS_CHANGED: + tf103c_dock_enable_touchpad(dock); + break; + default: + dev_warn(dev, "warning unknown SMI value: 0x%02x\n", val); + break; + } +} + +static irqreturn_t tf103c_dock_irq(int irq, void *data) +{ + struct tf103c_dock_data *dock = data; + struct device *dev = &dock->ec_client->dev; + u8 intr_data[8]; + int ret; + + ret = i2c_smbus_read_i2c_block_data(dock->intr_client, TF103C_DOCK_INTR_DATA_REG, + sizeof(intr_data), intr_data); + if (ret != sizeof(intr_data)) { + dev_err(dev, "error %d reading intr data\n", ret); + return IRQ_NONE; + } + + if (!(intr_data[1] & TF103C_DOCK_INTR_DATA1_OBF_MASK)) + return IRQ_NONE; + + /* intr_data[0] is the length of the rest of the packet */ + if (intr_data[0] == 3 && intr_data[1] == TF103C_DOCK_INTR_DATA1_OOB_VALUE && + intr_data[2] == TF103C_DOCK_INTR_DATA2_OOB_VALUE) { + /* intr_data[3] seems to contain a HID input report id */ + switch (intr_data[3]) { + case 0x01: + handle_nested_irq(dock->tp_irq); + break; + case 0x11: + case 0x13: + case 0x14: + tf103c_dock_kbd_interrupt(dock); + break; + default: + dev_warn(dev, "warning unknown intr_data[3]: 0x%02x\n", intr_data[3]); + break; + } + return IRQ_HANDLED; + } + + if (intr_data[1] & TF103C_DOCK_INTR_DATA1_SCI_MASK) { + tf103c_dock_sci(dock, intr_data[2]); + return IRQ_HANDLED; + } + + if (intr_data[1] & TF103C_DOCK_INTR_DATA1_SMI_MASK) { + tf103c_dock_smi(dock, intr_data[2]); + return IRQ_HANDLED; + } + + dev_warn(dev, "warning unknown intr data: %*ph\n", 8, intr_data); + return IRQ_NONE; +} + +/* + * tf103c_dock_[dis|en]able only run from hpd_work or at times when + * hpd_work cannot run (hpd_irq disabled), so no locking is necessary. + */ +static void tf103c_dock_enable(struct tf103c_dock_data *dock) +{ + if (dock->enabled) + return; + + if (dock->board_rev != 2) + gpiod_set_value(dock->pwr_en, 1); + + msleep(500); + enable_irq(dock->irq); + + dock->enabled = true; +} + +static void tf103c_dock_disable(struct tf103c_dock_data *dock) +{ + if (!dock->enabled) + return; + + disable_irq(dock->irq); + tf103c_dock_disable_touchpad(dock); + if (dock->board_rev != 2) + gpiod_set_value(dock->pwr_en, 0); + + dock->enabled = false; +} + +static void tf103c_dock_hpd_work(struct work_struct *work) +{ + struct tf103c_dock_data *dock = + container_of(work, struct tf103c_dock_data, hpd_work.work); + + if (gpiod_get_value(dock->hpd_gpio)) + tf103c_dock_enable(dock); + else + tf103c_dock_disable(dock); +} + +static irqreturn_t tf103c_dock_hpd_irq(int irq, void *data) +{ + struct tf103c_dock_data *dock = data; + + mod_delayed_work(system_long_wq, &dock->hpd_work, TF103C_DOCK_HPD_DEBOUNCE); + return IRQ_HANDLED; +} + +static void tf103c_dock_start_hpd(struct tf103c_dock_data *dock) +{ + enable_irq(dock->hpd_irq); + /* Sync current HPD status */ + queue_delayed_work(system_long_wq, &dock->hpd_work, TF103C_DOCK_HPD_DEBOUNCE); +} + +static void tf103c_dock_stop_hpd(struct tf103c_dock_data *dock) +{ + disable_irq(dock->hpd_irq); + cancel_delayed_work_sync(&dock->hpd_work); +} + +/*** probe ***/ + +static const struct dmi_system_id tf103c_dock_dmi_ids[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"), + }, + }, + { } +}; + +static void tf103c_dock_non_devm_cleanup(void *data) +{ + struct tf103c_dock_data *dock = data; + + if (dock->tp_irq_domain) + irq_domain_remove(dock->tp_irq_domain); + + if (!IS_ERR_OR_NULL(dock->hid)) + hid_destroy_device(dock->hid); + + i2c_unregister_device(dock->kbd_client); + i2c_unregister_device(dock->intr_client); + gpiod_remove_lookup_table(&tf103c_dock_gpios); +} + +static int tf103c_dock_probe(struct i2c_client *client) +{ + struct i2c_board_info board_info = { }; + struct device *dev = &client->dev; + struct gpio_desc *board_rev_gpio; + struct tf103c_dock_data *dock; + enum gpiod_flags flags; + int i, ret; + + /* GPIOs are hardcoded for the Asus TF103C, don't bind on other devs */ + if (!dmi_check_system(tf103c_dock_dmi_ids)) + return -ENODEV; + + dock = devm_kzalloc(dev, sizeof(*dock), GFP_KERNEL); + if (!dock) + return -ENOMEM; + + INIT_DELAYED_WORK(&dock->hpd_work, tf103c_dock_hpd_work); + + /* 1. Get GPIOs and their IRQs */ + gpiod_add_lookup_table(&tf103c_dock_gpios); + + ret = devm_add_action_or_reset(dev, tf103c_dock_non_devm_cleanup, dock); + if (ret) + return ret; + + /* + * The pin is configured as input by default, use ASIS because otherwise + * the gpio-crystalcove.c switches off the internal pull-down replacing + * it with a pull-up. + */ + board_rev_gpio = gpiod_get(dev, "board_rev", GPIOD_ASIS); + if (IS_ERR(board_rev_gpio)) + return dev_err_probe(dev, PTR_ERR(board_rev_gpio), "requesting board_rev GPIO\n"); + dock->board_rev = gpiod_get_value_cansleep(board_rev_gpio) + 1; + gpiod_put(board_rev_gpio); + + /* + * The Android driver drives the dock-pwr-en pin high at probe for + * revision 2 boards and then never touches it again? + * This code has only been tested on a revision 1 board, so for now + * just mimick what Android does on revision 2 boards. + */ + flags = (dock->board_rev == 2) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + dock->pwr_en = devm_gpiod_get(dev, "dock_pwr_en", flags); + if (IS_ERR(dock->pwr_en)) + return dev_err_probe(dev, PTR_ERR(dock->pwr_en), "requesting pwr_en GPIO\n"); + + dock->irq_gpio = devm_gpiod_get(dev, "dock_irq", GPIOD_IN); + if (IS_ERR(dock->irq_gpio)) + return dev_err_probe(dev, PTR_ERR(dock->irq_gpio), "requesting IRQ GPIO\n"); + + dock->irq = gpiod_to_irq(dock->irq_gpio); + if (dock->irq < 0) + return dev_err_probe(dev, dock->irq, "getting dock IRQ"); + + ret = devm_request_threaded_irq(dev, dock->irq, NULL, tf103c_dock_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_NO_AUTOEN, + "dock_irq", dock); + if (ret) + return dev_err_probe(dev, ret, "requesting dock IRQ"); + + dock->hpd_gpio = devm_gpiod_get(dev, "dock_hpd", GPIOD_IN); + if (IS_ERR(dock->hpd_gpio)) + return dev_err_probe(dev, PTR_ERR(dock->hpd_gpio), "requesting HPD GPIO\n"); + + dock->hpd_irq = gpiod_to_irq(dock->hpd_gpio); + if (dock->hpd_irq < 0) + return dev_err_probe(dev, dock->hpd_irq, "getting HPD IRQ"); + + ret = devm_request_irq(dev, dock->hpd_irq, tf103c_dock_hpd_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN, + "dock_hpd", dock); + if (ret) + return ret; + + /* + * 2. Create I2C clients. The dock uses 4 different i2c addresses, + * the ACPI NPCE69A node being probed points to the EC address. + */ + dock->ec_client = client; + + strscpy(board_info.type, "tf103c-dock-intr", I2C_NAME_SIZE); + board_info.addr = TF103C_DOCK_INTR_ADDR; + board_info.dev_name = TF103C_DOCK_DEV_NAME "-intr"; + + dock->intr_client = i2c_new_client_device(client->adapter, &board_info); + if (IS_ERR(dock->intr_client)) + return dev_err_probe(dev, PTR_ERR(dock->intr_client), "creating intr client\n"); + + strscpy(board_info.type, "tf103c-dock-kbd", I2C_NAME_SIZE); + board_info.addr = TF103C_DOCK_KBD_ADDR; + board_info.dev_name = TF103C_DOCK_DEV_NAME "-kbd"; + + dock->kbd_client = i2c_new_client_device(client->adapter, &board_info); + if (IS_ERR(dock->kbd_client)) + return dev_err_probe(dev, PTR_ERR(dock->kbd_client), "creating kbd client\n"); + + /* 3. Create input_dev for the top row of the keyboard */ + dock->input = devm_input_allocate_device(dev); + if (!dock->input) + return -ENOMEM; + + dock->input->name = "Asus TF103C Dock Top Row Keys"; + dock->input->phys = dev_name(dev); + dock->input->dev.parent = dev; + dock->input->id.bustype = BUS_I2C; + dock->input->id.vendor = /* USB_VENDOR_ID_ASUSTEK */ + dock->input->id.product = /* From TF-103-C */ + dock->input->id.version = 0x0100; /* 1.0 */ + + for (i = 0; i < ARRAY_SIZE(tf103c_dock_toprow_codes); i++) { + input_set_capability(dock->input, EV_KEY, tf103c_dock_toprow_codes[i][0]); + input_set_capability(dock->input, EV_KEY, tf103c_dock_toprow_codes[i][1]); + } + input_set_capability(dock->input, EV_KEY, KEY_RIGHTALT); + + ret = input_register_device(dock->input); + if (ret) + return ret; + + /* 4. Create HID device for the keyboard */ + dock->hid = hid_allocate_device(); + if (IS_ERR(dock->hid)) + return dev_err_probe(dev, PTR_ERR(dock->hid), "allocating hid dev\n"); + + dock->hid->driver_data = dock; + dock->hid->ll_driver = &tf103c_dock_hid_ll_driver; + dock->hid->dev.parent = &client->dev; + dock->hid->bus = BUS_I2C; + dock->hid->vendor = 0x0b05; /* USB_VENDOR_ID_ASUSTEK */ + dock->hid->product = 0x0103; /* From TF-103-C */ + dock->hid->version = 0x0100; /* 1.0 */ + strscpy(dock->hid->name, "Asus TF103C Dock Keyboard", sizeof(dock->hid->name)); + strscpy(dock->hid->phys, dev_name(dev), sizeof(dock->hid->phys)); + + ret = hid_add_device(dock->hid); + if (ret) + return dev_err_probe(dev, ret, "adding hid dev\n"); + + /* 5. Setup irqchip for touchpad IRQ pass-through */ + dock->tp_irqchip.name = KBUILD_MODNAME; + + dock->tp_irq_domain = irq_domain_add_linear(NULL, 1, &irq_domain_simple_ops, NULL); + if (!dock->tp_irq_domain) + return -ENOMEM; + + dock->tp_irq = irq_create_mapping(dock->tp_irq_domain, 0); + if (!dock->tp_irq) + return -ENOMEM; + + irq_set_chip_data(dock->tp_irq, dock); + irq_set_chip_and_handler(dock->tp_irq, &dock->tp_irqchip, handle_simple_irq); + irq_set_nested_thread(dock->tp_irq, true); + irq_set_noprobe(dock->tp_irq); + + dev_info(dev, "Asus TF103C board-revision: %d\n", dock->board_rev); + + tf103c_dock_start_hpd(dock); + + device_init_wakeup(dev, true); + i2c_set_clientdata(client, dock); + return 0; +} + +static int tf103c_dock_remove(struct i2c_client *client) +{ + struct tf103c_dock_data *dock = i2c_get_clientdata(client); + + tf103c_dock_stop_hpd(dock); + tf103c_dock_disable(dock); + + return 0; +} + +static int __maybe_unused tf103c_dock_suspend(struct device *dev) +{ + struct tf103c_dock_data *dock = dev_get_drvdata(dev); + + tf103c_dock_stop_hpd(dock); + + if (dock->enabled) { + tf103c_dock_ec_cmd(dock, tf103c_dock_suspend_cmd); + + if (device_may_wakeup(dev)) + enable_irq_wake(dock->irq); + } + + return 0; +} + +static int __maybe_unused tf103c_dock_resume(struct device *dev) +{ + struct tf103c_dock_data *dock = dev_get_drvdata(dev); + + if (dock->enabled) { + if (device_may_wakeup(dev)) + disable_irq_wake(dock->irq); + + /* Don't try to resume if the dock was unplugged during suspend */ + if (gpiod_get_value(dock->hpd_gpio)) + tf103c_dock_ec_cmd(dock, tf103c_dock_enable_cmd); + } + + tf103c_dock_start_hpd(dock); + return 0; +} + +SIMPLE_DEV_PM_OPS(tf103c_dock_pm_ops, tf103c_dock_suspend, tf103c_dock_resume); + +static const struct acpi_device_id tf103c_dock_acpi_match[] = { + {"NPCE69A"}, + { } +}; +MODULE_DEVICE_TABLE(acpi, tf103c_dock_acpi_match); + +static struct i2c_driver tf103c_dock_driver = { + .driver = { + .name = "asus-tf103c-dock", + .pm = &tf103c_dock_pm_ops, + .acpi_match_table = tf103c_dock_acpi_match, + }, + .probe_new = tf103c_dock_probe, + .remove = tf103c_dock_remove, +}; +module_i2c_driver(tf103c_dock_driver); + +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com"); +MODULE_DESCRIPTION("X86 Android tablets DSDT fixups driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 8f067ac4e952..a3b83b22a3b1 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -13,29 +13,29 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include <linux/kernel.h> -#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/backlight.h> +#include <linux/debugfs.h> +#include <linux/dmi.h> +#include <linux/fb.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> #include <linux/init.h> -#include <linux/types.h> -#include <linux/slab.h> #include <linux/input.h> #include <linux/input/sparse-keymap.h> -#include <linux/fb.h> -#include <linux/backlight.h> +#include <linux/kernel.h> #include <linux/leds.h> -#include <linux/rfkill.h> +#include <linux/module.h> #include <linux/pci.h> #include <linux/pci_hotplug.h> +#include <linux/platform_data/x86/asus-wmi.h> +#include <linux/platform_device.h> #include <linux/platform_profile.h> #include <linux/power_supply.h> -#include <linux/hwmon.h> -#include <linux/hwmon-sysfs.h> -#include <linux/debugfs.h> +#include <linux/rfkill.h> #include <linux/seq_file.h> -#include <linux/platform_data/x86/asus-wmi.h> -#include <linux/platform_device.h> -#include <linux/acpi.h> -#include <linux/dmi.h> +#include <linux/slab.h> +#include <linux/types.h> #include <linux/units.h> #include <acpi/battery.h> @@ -43,8 +43,8 @@ #include "asus-wmi.h" -MODULE_AUTHOR("Corentin Chary <corentin.chary@gmail.com>, " - "Yong Wang <yong.y.wang@intel.com>"); +MODULE_AUTHOR("Corentin Chary <corentin.chary@gmail.com>"); +MODULE_AUTHOR("Yong Wang <yong.y.wang@intel.com>"); MODULE_DESCRIPTION("Asus Generic WMI Driver"); MODULE_LICENSE("GPL"); @@ -106,8 +106,17 @@ module_param(fnlock_default, bool, 0444); #define WMI_EVENT_MASK 0xFFFF +#define FAN_CURVE_POINTS 8 +#define FAN_CURVE_BUF_LEN (FAN_CURVE_POINTS * 2) +#define FAN_CURVE_DEV_CPU 0x00 +#define FAN_CURVE_DEV_GPU 0x01 +/* Mask to determine if setting temperature or percentage */ +#define FAN_CURVE_PWM_MASK 0x04 + static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL }; +static int throttle_thermal_policy_write(struct asus_wmi *); + static bool ashs_present(void) { int i = 0; @@ -122,7 +131,8 @@ struct bios_args { u32 arg0; u32 arg1; u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. */ - u32 arg4; + u32 arg3; + u32 arg4; /* Some ROG laptops require a full 5 input args */ u32 arg5; } __packed; @@ -173,6 +183,13 @@ enum fan_type { FAN_TYPE_SPEC83, /* starting in Spec 8.3, use CPU_FAN_CTRL */ }; +struct fan_curve_data { + bool enabled; + u32 device_id; + u8 temps[FAN_CURVE_POINTS]; + u8 percents[FAN_CURVE_POINTS]; +}; + struct asus_wmi { int dsts_id; int spec; @@ -220,6 +237,10 @@ struct asus_wmi { bool throttle_thermal_policy_available; u8 throttle_thermal_policy_mode; + bool cpu_fan_curve_available; + bool gpu_fan_curve_available; + struct fan_curve_data custom_fan_curves[2]; + struct platform_profile_handler platform_profile_handler; bool platform_profile_support; @@ -285,6 +306,103 @@ int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval) } EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method); +static int asus_wmi_evaluate_method5(u32 method_id, + u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval) +{ + struct bios_args args = { + .arg0 = arg0, + .arg1 = arg1, + .arg2 = arg2, + .arg3 = arg3, + .arg4 = arg4, + }; + struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_status status; + union acpi_object *obj; + u32 tmp = 0; + + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id, + &input, &output); + + if (ACPI_FAILURE(status)) + return -EIO; + + obj = (union acpi_object *)output.pointer; + if (obj && obj->type == ACPI_TYPE_INTEGER) + tmp = (u32) obj->integer.value; + + if (retval) + *retval = tmp; + + kfree(obj); + + if (tmp == ASUS_WMI_UNSUPPORTED_METHOD) + return -ENODEV; + + return 0; +} + +/* + * Returns as an error if the method output is not a buffer. Typically this + * means that the method called is unsupported. + */ +static int asus_wmi_evaluate_method_buf(u32 method_id, + u32 arg0, u32 arg1, u8 *ret_buffer, size_t size) +{ + struct bios_args args = { + .arg0 = arg0, + .arg1 = arg1, + .arg2 = 0, + }; + struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_status status; + union acpi_object *obj; + int err = 0; + + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id, + &input, &output); + + if (ACPI_FAILURE(status)) + return -EIO; + + obj = (union acpi_object *)output.pointer; + + switch (obj->type) { + case ACPI_TYPE_BUFFER: + if (obj->buffer.length > size) + err = -ENOSPC; + if (obj->buffer.length == 0) + err = -ENODATA; + + memcpy(ret_buffer, obj->buffer.pointer, obj->buffer.length); + break; + case ACPI_TYPE_INTEGER: + err = (u32)obj->integer.value; + + if (err == ASUS_WMI_UNSUPPORTED_METHOD) + err = -ENODEV; + /* + * At least one method returns a 0 with no buffer if no arg + * is provided, such as ASUS_WMI_DEVID_CPU_FAN_CURVE + */ + if (err == 0) + err = -ENODATA; + break; + default: + err = -ENODATA; + break; + } + + kfree(obj); + + if (err) + return err; + + return 0; +} + static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args) { struct acpi_buffer input; @@ -1036,12 +1154,10 @@ static void asus_rfkill_hotplug(struct asus_wmi *asus) absent = (l == 0xffffffff); if (blocked != absent) { - pr_warn("BIOS says wireless lan is %s, " - "but the pci device is %s\n", + pr_warn("BIOS says wireless lan is %s, but the pci device is %s\n", blocked ? "blocked" : "unblocked", absent ? "absent" : "present"); - pr_warn("skipped wireless hotplug as probably " - "inappropriate for this model\n"); + pr_warn("skipped wireless hotplug as probably inappropriate for this model\n"); goto out_unlock; } @@ -1806,6 +1922,13 @@ static ssize_t pwm1_enable_store(struct device *dev, } asus->fan_pwm_mode = state; + + /* Must set to disabled if mode is toggled */ + if (asus->cpu_fan_curve_available) + asus->custom_fan_curves[FAN_CURVE_DEV_CPU].enabled = false; + if (asus->gpu_fan_curve_available) + asus->custom_fan_curves[FAN_CURVE_DEV_GPU].enabled = false; + return count; } @@ -1953,9 +2076,9 @@ static int fan_boost_mode_check_present(struct asus_wmi *asus) static int fan_boost_mode_write(struct asus_wmi *asus) { - int err; - u8 value; u32 retval; + u8 value; + int err; value = asus->fan_boost_mode; @@ -2013,10 +2136,10 @@ static ssize_t fan_boost_mode_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - int result; - u8 new_mode; struct asus_wmi *asus = dev_get_drvdata(dev); u8 mask = asus->fan_boost_mode_mask; + u8 new_mode; + int result; result = kstrtou8(buf, 10, &new_mode); if (result < 0) { @@ -2043,6 +2166,426 @@ static ssize_t fan_boost_mode_store(struct device *dev, // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent static DEVICE_ATTR_RW(fan_boost_mode); +/* Custom fan curves **********************************************************/ + +static void fan_curve_copy_from_buf(struct fan_curve_data *data, u8 *buf) +{ + int i; + + for (i = 0; i < FAN_CURVE_POINTS; i++) { + data->temps[i] = buf[i]; + } + + for (i = 0; i < FAN_CURVE_POINTS; i++) { + data->percents[i] = + 255 * buf[i + FAN_CURVE_POINTS] / 100; + } +} + +static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev) +{ + struct fan_curve_data *curves; + u8 buf[FAN_CURVE_BUF_LEN]; + int fan_idx = 0; + u8 mode = 0; + int err; + + if (asus->throttle_thermal_policy_available) + mode = asus->throttle_thermal_policy_mode; + /* DEVID_<C/G>PU_FAN_CURVE is switched for OVERBOOST vs SILENT */ + if (mode == 2) + mode = 1; + else if (mode == 1) + mode = 2; + + if (fan_dev == ASUS_WMI_DEVID_GPU_FAN_CURVE) + fan_idx = FAN_CURVE_DEV_GPU; + + curves = &asus->custom_fan_curves[fan_idx]; + err = asus_wmi_evaluate_method_buf(asus->dsts_id, fan_dev, mode, buf, + FAN_CURVE_BUF_LEN); + if (err) + return err; + + fan_curve_copy_from_buf(curves, buf); + curves->device_id = fan_dev; + + return 0; +} + +/* Check if capability exists, and populate defaults */ +static int fan_curve_check_present(struct asus_wmi *asus, bool *available, + u32 fan_dev) +{ + int err; + + *available = false; + + err = fan_curve_get_factory_default(asus, fan_dev); + if (err) { + if (err == -ENODEV) + return 0; + return err; + } + + *available = true; + return 0; +} + +/* Determine which fan the attribute is for if SENSOR_ATTR */ +static struct fan_curve_data *fan_curve_attr_select(struct asus_wmi *asus, + struct device_attribute *attr) +{ + int index = to_sensor_dev_attr(attr)->index; + + return &asus->custom_fan_curves[index & FAN_CURVE_DEV_GPU]; +} + +/* Determine which fan the attribute is for if SENSOR_ATTR_2 */ +static struct fan_curve_data *fan_curve_attr_2_select(struct asus_wmi *asus, + struct device_attribute *attr) +{ + int nr = to_sensor_dev_attr_2(attr)->nr; + + return &asus->custom_fan_curves[nr & FAN_CURVE_DEV_GPU]; +} + +static ssize_t fan_curve_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct sensor_device_attribute_2 *dev_attr = to_sensor_dev_attr_2(attr); + struct asus_wmi *asus = dev_get_drvdata(dev); + struct fan_curve_data *data; + int value, index, nr; + + data = fan_curve_attr_2_select(asus, attr); + index = dev_attr->index; + nr = dev_attr->nr; + + if (nr & FAN_CURVE_PWM_MASK) + value = data->percents[index]; + else + value = data->temps[index]; + + return sysfs_emit(buf, "%d\n", value); +} + +/* + * "fan_dev" is the related WMI method such as ASUS_WMI_DEVID_CPU_FAN_CURVE. + */ +static int fan_curve_write(struct asus_wmi *asus, + struct fan_curve_data *data) +{ + u32 arg1 = 0, arg2 = 0, arg3 = 0, arg4 = 0; + u8 *percents = data->percents; + u8 *temps = data->temps; + int ret, i, shift = 0; + + if (!data->enabled) + return 0; + + for (i = 0; i < FAN_CURVE_POINTS / 2; i++) { + arg1 += (temps[i]) << shift; + arg2 += (temps[i + 4]) << shift; + /* Scale to percentage for device */ + arg3 += (100 * percents[i] / 255) << shift; + arg4 += (100 * percents[i + 4] / 255) << shift; + shift += 8; + } + + return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, + data->device_id, + arg1, arg2, arg3, arg4, &ret); +} + +static ssize_t fan_curve_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct sensor_device_attribute_2 *dev_attr = to_sensor_dev_attr_2(attr); + struct asus_wmi *asus = dev_get_drvdata(dev); + struct fan_curve_data *data; + u8 value; + int err; + + int pwm = dev_attr->nr & FAN_CURVE_PWM_MASK; + int index = dev_attr->index; + + data = fan_curve_attr_2_select(asus, attr); + + err = kstrtou8(buf, 10, &value); + if (err < 0) + return err; + + if (pwm) { + data->percents[index] = value; + } else { + data->temps[index] = value; + } + + /* + * Mark as disabled so the user has to explicitly enable to apply a + * changed fan curve. This prevents potential lockups from writing out + * many changes as one-write-per-change. + */ + data->enabled = false; + + return count; +} + +static ssize_t fan_curve_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + struct fan_curve_data *data; + int out = 2; + + data = fan_curve_attr_select(asus, attr); + + if (data->enabled) + out = 1; + + return sysfs_emit(buf, "%d\n", out); +} + +static ssize_t fan_curve_enable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + struct fan_curve_data *data; + int value, err; + + data = fan_curve_attr_select(asus, attr); + + err = kstrtoint(buf, 10, &value); + if (err < 0) + return err; + + switch (value) { + case 1: + data->enabled = true; + break; + case 2: + data->enabled = false; + break; + /* + * Auto + reset the fan curve data to defaults. Make it an explicit + * option so that users don't accidentally overwrite a set fan curve. + */ + case 3: + err = fan_curve_get_factory_default(asus, data->device_id); + if (err) + return err; + data->enabled = false; + break; + default: + return -EINVAL; + } + + if (data->enabled) { + err = fan_curve_write(asus, data); + if (err) + return err; + } else { + /* + * For machines with throttle this is the only way to reset fans + * to default mode of operation (does not erase curve data). + */ + if (asus->throttle_thermal_policy_available) { + err = throttle_thermal_policy_write(asus); + if (err) + return err; + /* Similar is true for laptops with this fan */ + } else if (asus->fan_type == FAN_TYPE_SPEC83) { + err = asus_fan_set_auto(asus); + if (err) + return err; + } else { + /* Safeguard against fautly ACPI tables */ + err = fan_curve_get_factory_default(asus, data->device_id); + if (err) + return err; + err = fan_curve_write(asus, data); + if (err) + return err; + } + } + return count; +} + +/* CPU */ +static SENSOR_DEVICE_ATTR_RW(pwm1_enable, fan_curve_enable, FAN_CURVE_DEV_CPU); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_temp, fan_curve, + FAN_CURVE_DEV_CPU, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_temp, fan_curve, + FAN_CURVE_DEV_CPU, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_temp, fan_curve, + FAN_CURVE_DEV_CPU, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_temp, fan_curve, + FAN_CURVE_DEV_CPU, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_temp, fan_curve, + FAN_CURVE_DEV_CPU, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_temp, fan_curve, + FAN_CURVE_DEV_CPU, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_temp, fan_curve, + FAN_CURVE_DEV_CPU, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_temp, fan_curve, + FAN_CURVE_DEV_CPU, 7); + +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_pwm, fan_curve, + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_pwm, fan_curve, + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_pwm, fan_curve, + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_pwm, fan_curve, + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_pwm, fan_curve, + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_pwm, fan_curve, + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_pwm, fan_curve, + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_pwm, fan_curve, + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 7); + +/* GPU */ +static SENSOR_DEVICE_ATTR_RW(pwm2_enable, fan_curve_enable, FAN_CURVE_DEV_GPU); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_temp, fan_curve, + FAN_CURVE_DEV_GPU, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_temp, fan_curve, + FAN_CURVE_DEV_GPU, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_temp, fan_curve, + FAN_CURVE_DEV_GPU, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_temp, fan_curve, + FAN_CURVE_DEV_GPU, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_temp, fan_curve, + FAN_CURVE_DEV_GPU, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point6_temp, fan_curve, + FAN_CURVE_DEV_GPU, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point7_temp, fan_curve, + FAN_CURVE_DEV_GPU, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point8_temp, fan_curve, + FAN_CURVE_DEV_GPU, 7); + +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_pwm, fan_curve, + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 0); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_pwm, fan_curve, + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 1); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_pwm, fan_curve, + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 2); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_pwm, fan_curve, + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 3); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_pwm, fan_curve, + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 4); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point6_pwm, fan_curve, + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 5); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point7_pwm, fan_curve, + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 6); +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point8_pwm, fan_curve, + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 7); + +static struct attribute *asus_fan_curve_attr[] = { + /* CPU */ + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point7_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point8_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point7_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point8_pwm.dev_attr.attr, + /* GPU */ + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point5_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point6_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point7_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point8_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point5_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point6_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point7_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point8_pwm.dev_attr.attr, + NULL +}; + +static umode_t asus_fan_curve_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct asus_wmi *asus = dev_get_drvdata(dev->parent); + + /* + * Check the char instead of casting attr as there are two attr types + * involved here (attr1 and attr2) + */ + if (asus->cpu_fan_curve_available && attr->name[3] == '1') + return 0644; + + if (asus->gpu_fan_curve_available && attr->name[3] == '2') + return 0644; + + return 0; +} + +static const struct attribute_group asus_fan_curve_attr_group = { + .is_visible = asus_fan_curve_is_visible, + .attrs = asus_fan_curve_attr, +}; +__ATTRIBUTE_GROUPS(asus_fan_curve_attr); + +/* + * Must be initialised after throttle_thermal_policy_check_present() as + * we check the status of throttle_thermal_policy_available during init. + */ +static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) +{ + struct device *dev = &asus->platform_device->dev; + struct device *hwmon; + int err; + + err = fan_curve_check_present(asus, &asus->cpu_fan_curve_available, + ASUS_WMI_DEVID_CPU_FAN_CURVE); + if (err) + return err; + + err = fan_curve_check_present(asus, &asus->gpu_fan_curve_available, + ASUS_WMI_DEVID_GPU_FAN_CURVE); + if (err) + return err; + + if (!asus->cpu_fan_curve_available && !asus->gpu_fan_curve_available) + return 0; + + hwmon = devm_hwmon_device_register_with_groups( + dev, "asus_custom_fan_curve", asus, asus_fan_curve_attr_groups); + + if (IS_ERR(hwmon)) { + dev_err(dev, + "Could not register asus_custom_fan_curve device\n"); + return PTR_ERR(hwmon); + } + + return 0; +} + /* Throttle thermal policy ****************************************************/ static int throttle_thermal_policy_check_present(struct asus_wmi *asus) @@ -2092,6 +2635,12 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus) return -EIO; } + /* Must set to disabled if mode is toggled */ + if (asus->cpu_fan_curve_available) + asus->custom_fan_curves[FAN_CURVE_DEV_CPU].enabled = false; + if (asus->gpu_fan_curve_available) + asus->custom_fan_curves[FAN_CURVE_DEV_GPU].enabled = false; + return 0; } @@ -3035,6 +3584,10 @@ static int asus_wmi_add(struct platform_device *pdev) if (err) goto fail_hwmon; + err = asus_wmi_custom_fan_curve_init(asus); + if (err) + goto fail_custom_fan_curve; + err = asus_wmi_led_init(asus); if (err) goto fail_leds; @@ -3106,6 +3659,7 @@ fail_input: asus_wmi_sysfs_exit(asus->platform_device); fail_sysfs: fail_throttle_thermal_policy: +fail_custom_fan_curve: fail_platform_profile_setup: if (asus->platform_profile_support) platform_profile_remove(); @@ -3131,6 +3685,7 @@ static int asus_wmi_remove(struct platform_device *device) asus_wmi_debugfs_exit(asus); asus_wmi_sysfs_exit(asus->platform_device); asus_fan_set_auto(asus); + throttle_thermal_policy_set_default(asus); asus_wmi_battery_exit(asus); if (asus->platform_profile_support) diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c index 435a91fe2568..e9f852f7c27f 100644 --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -355,39 +355,20 @@ static int lis3lv02d_remove(struct platform_device *device) return 0; } -#ifdef CONFIG_PM_SLEEP -static int lis3lv02d_suspend(struct device *dev) +static int __maybe_unused lis3lv02d_suspend(struct device *dev) { /* make sure the device is off when we suspend */ lis3lv02d_poweroff(&lis3_dev); return 0; } -static int lis3lv02d_resume(struct device *dev) +static int __maybe_unused lis3lv02d_resume(struct device *dev) { lis3lv02d_poweron(&lis3_dev); return 0; } -static int lis3lv02d_restore(struct device *dev) -{ - lis3lv02d_poweron(&lis3_dev); - return 0; -} - -static const struct dev_pm_ops hp_accel_pm = { - .suspend = lis3lv02d_suspend, - .resume = lis3lv02d_resume, - .freeze = lis3lv02d_suspend, - .thaw = lis3lv02d_resume, - .poweroff = lis3lv02d_suspend, - .restore = lis3lv02d_restore, -}; - -#define HP_ACCEL_PM (&hp_accel_pm) -#else -#define HP_ACCEL_PM NULL -#endif +static SIMPLE_DEV_PM_OPS(hp_accel_pm, lis3lv02d_suspend, lis3lv02d_resume); /* For the HP MDPS aka 3D Driveguard */ static struct platform_driver lis3lv02d_driver = { @@ -395,7 +376,7 @@ static struct platform_driver lis3lv02d_driver = { .remove = lis3lv02d_remove, .driver = { .name = "hp_accel", - .pm = HP_ACCEL_PM, + .pm = &hp_accel_pm, .acpi_match_table = lis3lv02d_device_ids, }, }; diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile index 7c24be2423d8..174a80a6c87c 100644 --- a/drivers/platform/x86/intel/Makefile +++ b/drivers/platform/x86/intel/Makefile @@ -30,6 +30,8 @@ obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o # Intel PMIC / PMC / P-Unit drivers intel_bxtwc_tmu-y := bxtwc_tmu.o obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o +intel_crystal_cove_charger-y := crystal_cove_charger.o +obj-$(CONFIG_X86_ANDROID_TABLETS) += intel_crystal_cove_charger.o intel_chtdc_ti_pwrbtn-y := chtdc_ti_pwrbtn.o obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o intel_mrfld_pwrbtn-y := mrfld_pwrbtn.o diff --git a/drivers/platform/x86/intel/crystal_cove_charger.c b/drivers/platform/x86/intel/crystal_cove_charger.c new file mode 100644 index 000000000000..0374bc742513 --- /dev/null +++ b/drivers/platform/x86/intel/crystal_cove_charger.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for the external-charger IRQ pass-through function of the + * Intel Bay Trail Crystal Cove PMIC. + * + * Note this is NOT a power_supply class driver, it just deals with IRQ + * pass-through, this requires a separate driver because the PMIC's + * level 2 interrupt for this must be explicitly acked. + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define CHGRIRQ_REG 0x0a + +struct crystal_cove_charger_data { + struct mutex buslock; /* irq_bus_lock */ + struct irq_chip irqchip; + struct regmap *regmap; + struct irq_domain *irq_domain; + int irq; + int charger_irq; + bool irq_enabled; + bool irq_is_enabled; +}; + +static irqreturn_t crystal_cove_charger_irq(int irq, void *data) +{ + struct crystal_cove_charger_data *charger = data; + + /* No need to read CHGRIRQ_REG as there is only 1 IRQ */ + handle_nested_irq(charger->charger_irq); + + /* Ack CHGRIRQ 0 */ + regmap_write(charger->regmap, CHGRIRQ_REG, BIT(0)); + + return IRQ_HANDLED; +} + +static void crystal_cove_charger_irq_bus_lock(struct irq_data *data) +{ + struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data); + + mutex_lock(&charger->buslock); +} + +static void crystal_cove_charger_irq_bus_sync_unlock(struct irq_data *data) +{ + struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data); + + if (charger->irq_is_enabled != charger->irq_enabled) { + if (charger->irq_enabled) + enable_irq(charger->irq); + else + disable_irq(charger->irq); + + charger->irq_is_enabled = charger->irq_enabled; + } + + mutex_unlock(&charger->buslock); +} + +static void crystal_cove_charger_irq_unmask(struct irq_data *data) +{ + struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data); + + charger->irq_enabled = true; +} + +static void crystal_cove_charger_irq_mask(struct irq_data *data) +{ + struct crystal_cove_charger_data *charger = irq_data_get_irq_chip_data(data); + + charger->irq_enabled = false; +} + +static void crystal_cove_charger_rm_irq_domain(void *data) +{ + struct crystal_cove_charger_data *charger = data; + + irq_domain_remove(charger->irq_domain); +} + +static int crystal_cove_charger_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct crystal_cove_charger_data *charger; + int ret; + + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); + if (!charger) + return -ENOMEM; + + charger->regmap = pmic->regmap; + mutex_init(&charger->buslock); + + charger->irq = platform_get_irq(pdev, 0); + if (charger->irq < 0) + return charger->irq; + + charger->irq_domain = irq_domain_create_linear(dev_fwnode(pdev->dev.parent), 1, + &irq_domain_simple_ops, NULL); + if (!charger->irq_domain) + return -ENOMEM; + + /* Distuingish IRQ domain from others sharing (MFD) the same fwnode */ + irq_domain_update_bus_token(charger->irq_domain, DOMAIN_BUS_WAKEUP); + + ret = devm_add_action_or_reset(&pdev->dev, crystal_cove_charger_rm_irq_domain, charger); + if (ret) + return ret; + + charger->charger_irq = irq_create_mapping(charger->irq_domain, 0); + if (!charger->charger_irq) + return -ENOMEM; + + charger->irqchip.name = KBUILD_MODNAME; + charger->irqchip.irq_unmask = crystal_cove_charger_irq_unmask; + charger->irqchip.irq_mask = crystal_cove_charger_irq_mask; + charger->irqchip.irq_bus_lock = crystal_cove_charger_irq_bus_lock; + charger->irqchip.irq_bus_sync_unlock = crystal_cove_charger_irq_bus_sync_unlock; + + irq_set_chip_data(charger->charger_irq, charger); + irq_set_chip_and_handler(charger->charger_irq, &charger->irqchip, handle_simple_irq); + irq_set_nested_thread(charger->charger_irq, true); + irq_set_noprobe(charger->charger_irq); + + ret = devm_request_threaded_irq(&pdev->dev, charger->irq, NULL, + crystal_cove_charger_irq, + IRQF_ONESHOT | IRQF_NO_AUTOEN, + KBUILD_MODNAME, charger); + if (ret) + return dev_err_probe(&pdev->dev, ret, "requesting irq\n"); + + return 0; +} + +static struct platform_driver crystal_cove_charger_driver = { + .probe = crystal_cove_charger_probe, + .driver = { + .name = "crystal_cove_charger", + }, +}; +module_platform_driver(crystal_cove_charger_driver); + +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com"); +MODULE_DESCRIPTION("Intel Bay Trail Crystal Cove external charger IRQ pass-through"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c index faa5570f6e6b..f93d437fd192 100644 --- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c @@ -110,6 +110,12 @@ static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = .tps68470_regulator_pdata = &surface_go_tps68470_pdata, }; +static const struct int3472_tps68470_board_data surface_go3_tps68470_board_data = { + .dev_name = "i2c-INT3472:01", + .tps68470_gpio_lookup_table = &surface_go_tps68470_gpios, + .tps68470_regulator_pdata = &surface_go_tps68470_pdata, +}; + static const struct dmi_system_id int3472_tps68470_board_data_table[] = { { .matches = { @@ -125,6 +131,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = { }, .driver_data = (void *)&surface_go_tps68470_board_data, }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"), + }, + .driver_data = (void *)&surface_go3_tps68470_board_data, + }, { } }; diff --git a/drivers/platform/x86/intel/uncore-frequency.c b/drivers/platform/x86/intel/uncore-frequency.c index 3ee4c5c8a64f..4cd8254f2e40 100644 --- a/drivers/platform/x86/intel/uncore-frequency.c +++ b/drivers/platform/x86/intel/uncore-frequency.c @@ -225,6 +225,7 @@ static struct attribute *uncore_attrs[] = { &min_freq_khz.attr, NULL }; +ATTRIBUTE_GROUPS(uncore); static void uncore_sysfs_entry_release(struct kobject *kobj) { @@ -236,7 +237,7 @@ static void uncore_sysfs_entry_release(struct kobject *kobj) static struct kobj_type uncore_ktype = { .release = uncore_sysfs_entry_release, .sysfs_ops = &kobj_sysfs_ops, - .default_attrs = uncore_attrs, + .default_groups = uncore_groups, }; /* Caller provides protection */ diff --git a/drivers/platform/x86/lenovo-yogabook-wmi.c b/drivers/platform/x86/lenovo-yogabook-wmi.c new file mode 100644 index 000000000000..5f4bd1eec38a --- /dev/null +++ b/drivers/platform/x86/lenovo-yogabook-wmi.c @@ -0,0 +1,408 @@ +// SPDX-License-Identifier: GPL-2.0 +/* WMI driver for Lenovo Yoga Book YB1-X90* / -X91* tablets */ + +#include <linux/acpi.h> +#include <linux/devm-helpers.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/leds.h> +#include <linux/wmi.h> +#include <linux/workqueue.h> + +#define YB_MBTN_EVENT_GUID "243FEC1D-1963-41C1-8100-06A9D82A94B4" +#define YB_MBTN_METHOD_GUID "742B0CA1-0B20-404B-9CAA-AEFCABF30CE0" + +#define YB_PAD_ENABLE 1 +#define YB_PAD_DISABLE 2 +#define YB_LIGHTUP_BTN 3 + +#define YB_KBD_BL_DEFAULT 128 + +/* flags */ +enum { + YB_KBD_IS_ON, + YB_DIGITIZER_IS_ON, + YB_DIGITIZER_MODE, + YB_TABLET_MODE, + YB_SUSPENDED, +}; + +struct yogabook_wmi { + struct wmi_device *wdev; + struct acpi_device *kbd_adev; + struct acpi_device *dig_adev; + struct device *kbd_dev; + struct device *dig_dev; + struct gpio_desc *backside_hall_gpio; + int backside_hall_irq; + struct work_struct work; + struct led_classdev kbd_bl_led; + unsigned long flags; + uint8_t brightness; +}; + +static int yogabook_wmi_do_action(struct wmi_device *wdev, int action) +{ + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer input; + acpi_status status; + u32 dummy_arg = 0; + + dev_dbg(&wdev->dev, "Do action: %d\n", action); + + input.pointer = &dummy_arg; + input.length = sizeof(dummy_arg); + + status = wmi_evaluate_method(YB_MBTN_METHOD_GUID, 0, action, &input, + &output); + if (ACPI_FAILURE(status)) { + dev_err(&wdev->dev, "Calling WMI method failure: 0x%x\n", + status); + return status; + } + + kfree(output.pointer); + + return 0; +} + +/* + * To control keyboard backlight, call the method KBLC() of the TCS1 ACPI + * device (Goodix touchpad acts as virtual sensor keyboard). + */ +static int yogabook_wmi_set_kbd_backlight(struct wmi_device *wdev, + uint8_t level) +{ + struct yogabook_wmi *data = dev_get_drvdata(&wdev->dev); + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_object_list input; + union acpi_object param; + acpi_status status; + + if (data->kbd_adev->power.state != ACPI_STATE_D0) { + dev_warn(&wdev->dev, "keyboard touchscreen not in D0, cannot set brightness\n"); + return -ENXIO; + } + + dev_dbg(&wdev->dev, "Set KBLC level to %u\n", level); + + input.count = 1; + input.pointer = ¶m; + + param.type = ACPI_TYPE_INTEGER; + param.integer.value = 255 - level; + + status = acpi_evaluate_object(acpi_device_handle(data->kbd_adev), "KBLC", + &input, &output); + if (ACPI_FAILURE(status)) { + dev_err(&wdev->dev, "Failed to call KBLC method: 0x%x\n", status); + return status; + } + + kfree(output.pointer); + return 0; +} + +static void yogabook_wmi_work(struct work_struct *work) +{ + struct yogabook_wmi *data = container_of(work, struct yogabook_wmi, work); + struct device *dev = &data->wdev->dev; + bool kbd_on, digitizer_on; + int r; + + if (test_bit(YB_SUSPENDED, &data->flags)) + return; + + if (test_bit(YB_TABLET_MODE, &data->flags)) { + kbd_on = false; + digitizer_on = false; + } else if (test_bit(YB_DIGITIZER_MODE, &data->flags)) { + digitizer_on = true; + kbd_on = false; + } else { + kbd_on = true; + digitizer_on = false; + } + + if (!kbd_on && test_bit(YB_KBD_IS_ON, &data->flags)) { + /* + * Must be done before releasing the keyboard touchscreen driver, + * so that the keyboard touchscreen dev is still in D0. + */ + yogabook_wmi_set_kbd_backlight(data->wdev, 0); + device_release_driver(data->kbd_dev); + clear_bit(YB_KBD_IS_ON, &data->flags); + } + + if (!digitizer_on && test_bit(YB_DIGITIZER_IS_ON, &data->flags)) { + yogabook_wmi_do_action(data->wdev, YB_PAD_DISABLE); + device_release_driver(data->dig_dev); + clear_bit(YB_DIGITIZER_IS_ON, &data->flags); + } + + if (kbd_on && !test_bit(YB_KBD_IS_ON, &data->flags)) { + r = device_reprobe(data->kbd_dev); + if (r) + dev_warn(dev, "Reprobe of keyboard touchscreen failed: %d\n", r); + + yogabook_wmi_set_kbd_backlight(data->wdev, data->brightness); + set_bit(YB_KBD_IS_ON, &data->flags); + } + + if (digitizer_on && !test_bit(YB_DIGITIZER_IS_ON, &data->flags)) { + r = device_reprobe(data->dig_dev); + if (r) + dev_warn(dev, "Reprobe of digitizer failed: %d\n", r); + + yogabook_wmi_do_action(data->wdev, YB_PAD_ENABLE); + set_bit(YB_DIGITIZER_IS_ON, &data->flags); + } +} + +static void yogabook_wmi_notify(struct wmi_device *wdev, union acpi_object *dummy) +{ + struct yogabook_wmi *data = dev_get_drvdata(&wdev->dev); + + if (test_bit(YB_SUSPENDED, &data->flags)) + return; + + if (test_bit(YB_DIGITIZER_MODE, &data->flags)) + clear_bit(YB_DIGITIZER_MODE, &data->flags); + else + set_bit(YB_DIGITIZER_MODE, &data->flags); + + /* + * We are called from the ACPI core and the driver [un]binding which is + * done also needs ACPI functions, use a workqueue to avoid deadlocking. + */ + schedule_work(&data->work); +} + +static irqreturn_t yogabook_backside_hall_irq(int irq, void *_data) +{ + struct yogabook_wmi *data = _data; + + if (gpiod_get_value(data->backside_hall_gpio)) + set_bit(YB_TABLET_MODE, &data->flags); + else + clear_bit(YB_TABLET_MODE, &data->flags); + + schedule_work(&data->work); + + return IRQ_HANDLED; +} + +static enum led_brightness kbd_brightness_get(struct led_classdev *cdev) +{ + struct yogabook_wmi *data = + container_of(cdev, struct yogabook_wmi, kbd_bl_led); + + return data->brightness; +} + +static int kbd_brightness_set(struct led_classdev *cdev, + enum led_brightness value) +{ + struct yogabook_wmi *data = + container_of(cdev, struct yogabook_wmi, kbd_bl_led); + struct wmi_device *wdev = data->wdev; + + if ((value < 0) || (value > 255)) + return -EINVAL; + + data->brightness = value; + + if (data->kbd_adev->power.state != ACPI_STATE_D0) + return 0; + + return yogabook_wmi_set_kbd_backlight(wdev, data->brightness); +} + +static struct gpiod_lookup_table yogabook_wmi_gpios = { + .dev_id = "243FEC1D-1963-41C1-8100-06A9D82A94B4", + .table = { + GPIO_LOOKUP("INT33FF:02", 18, "backside_hall_sw", GPIO_ACTIVE_LOW), + {} + }, +}; + +static void yogabook_wmi_rm_gpio_lookup(void *unused) +{ + gpiod_remove_lookup_table(&yogabook_wmi_gpios); +} + +static int yogabook_wmi_probe(struct wmi_device *wdev, const void *context) +{ + struct yogabook_wmi *data; + int r; + + data = devm_kzalloc(&wdev->dev, sizeof(struct yogabook_wmi), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + dev_set_drvdata(&wdev->dev, data); + + data->wdev = wdev; + data->brightness = YB_KBD_BL_DEFAULT; + set_bit(YB_KBD_IS_ON, &data->flags); + set_bit(YB_DIGITIZER_IS_ON, &data->flags); + + r = devm_work_autocancel(&wdev->dev, &data->work, yogabook_wmi_work); + if (r) + return r; + + data->kbd_adev = acpi_dev_get_first_match_dev("GDIX1001", NULL, -1); + if (!data->kbd_adev) { + dev_err(&wdev->dev, "Cannot find the touchpad device in ACPI tables\n"); + return -ENODEV; + } + + data->dig_adev = acpi_dev_get_first_match_dev("WCOM0019", NULL, -1); + if (!data->dig_adev) { + dev_err(&wdev->dev, "Cannot find the digitizer device in ACPI tables\n"); + r = -ENODEV; + goto error_put_devs; + } + + data->kbd_dev = get_device(acpi_get_first_physical_node(data->kbd_adev)); + if (!data->kbd_dev || !data->kbd_dev->driver) { + r = -EPROBE_DEFER; + goto error_put_devs; + } + + data->dig_dev = get_device(acpi_get_first_physical_node(data->dig_adev)); + if (!data->dig_dev || !data->dig_dev->driver) { + r = -EPROBE_DEFER; + goto error_put_devs; + } + + gpiod_add_lookup_table(&yogabook_wmi_gpios); + + r = devm_add_action_or_reset(&wdev->dev, yogabook_wmi_rm_gpio_lookup, NULL); + if (r) + goto error_put_devs; + + data->backside_hall_gpio = + devm_gpiod_get(&wdev->dev, "backside_hall_sw", GPIOD_IN); + if (IS_ERR(data->backside_hall_gpio)) { + r = PTR_ERR(data->backside_hall_gpio); + dev_err_probe(&wdev->dev, r, "Getting backside_hall_sw GPIO\n"); + goto error_put_devs; + } + + r = gpiod_to_irq(data->backside_hall_gpio); + if (r < 0) { + dev_err_probe(&wdev->dev, r, "Getting backside_hall_sw IRQ\n"); + goto error_put_devs; + } + data->backside_hall_irq = r; + + r = devm_request_irq(&wdev->dev, data->backside_hall_irq, + yogabook_backside_hall_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "backside_hall_sw", data); + if (r) { + dev_err_probe(&wdev->dev, r, "Requesting backside_hall_sw IRQ\n"); + goto error_put_devs; + } + + schedule_work(&data->work); + + data->kbd_bl_led.name = "ybwmi::kbd_backlight"; + data->kbd_bl_led.brightness_set_blocking = kbd_brightness_set; + data->kbd_bl_led.brightness_get = kbd_brightness_get; + data->kbd_bl_led.max_brightness = 255; + + r = devm_led_classdev_register(&wdev->dev, &data->kbd_bl_led); + if (r < 0) { + dev_err_probe(&wdev->dev, r, "Registering backlight LED device\n"); + goto error_put_devs; + } + + return 0; + +error_put_devs: + put_device(data->dig_dev); + put_device(data->kbd_dev); + acpi_dev_put(data->dig_adev); + acpi_dev_put(data->kbd_adev); + return r; +} + +static void yogabook_wmi_remove(struct wmi_device *wdev) +{ + struct yogabook_wmi *data = dev_get_drvdata(&wdev->dev); + + put_device(data->dig_dev); + put_device(data->kbd_dev); + acpi_dev_put(data->dig_adev); + acpi_dev_put(data->kbd_adev); +} + +static int __maybe_unused yogabook_wmi_suspend(struct device *dev) +{ + struct wmi_device *wdev = container_of(dev, struct wmi_device, dev); + struct yogabook_wmi *data = dev_get_drvdata(dev); + + set_bit(YB_SUSPENDED, &data->flags); + + flush_work(&data->work); + + /* Turn off the pen button at sleep */ + if (test_bit(YB_DIGITIZER_IS_ON, &data->flags)) + yogabook_wmi_do_action(wdev, YB_PAD_DISABLE); + + return 0; +} + +static int __maybe_unused yogabook_wmi_resume(struct device *dev) +{ + struct wmi_device *wdev = container_of(dev, struct wmi_device, dev); + struct yogabook_wmi *data = dev_get_drvdata(dev); + + if (test_bit(YB_KBD_IS_ON, &data->flags)) { + /* Ensure keyboard touchpad is on before we call KBLC() */ + acpi_device_set_power(data->kbd_adev, ACPI_STATE_D0); + yogabook_wmi_set_kbd_backlight(wdev, data->brightness); + } + + if (test_bit(YB_DIGITIZER_IS_ON, &data->flags)) + yogabook_wmi_do_action(wdev, YB_PAD_ENABLE); + + clear_bit(YB_SUSPENDED, &data->flags); + + /* Check for YB_TABLET_MODE changes made during suspend */ + schedule_work(&data->work); + + return 0; +} + +static const struct wmi_device_id yogabook_wmi_id_table[] = { + { + .guid_string = YB_MBTN_EVENT_GUID, + }, + { } /* Terminating entry */ +}; + +static SIMPLE_DEV_PM_OPS(yogabook_wmi_pm_ops, + yogabook_wmi_suspend, yogabook_wmi_resume); + +static struct wmi_driver yogabook_wmi_driver = { + .driver = { + .name = "yogabook-wmi", + .pm = &yogabook_wmi_pm_ops, + }, + .no_notify_data = true, + .id_table = yogabook_wmi_id_table, + .probe = yogabook_wmi_probe, + .remove = yogabook_wmi_remove, + .notify = yogabook_wmi_notify, +}; +module_wmi_driver(yogabook_wmi_driver); + +MODULE_DEVICE_TABLE(wmi, yogabook_wmi_id_table); +MODULE_AUTHOR("Yauhen Kharuzhy"); +MODULE_DESCRIPTION("Lenovo Yoga Book WMI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c index a9d2a4b98e57..a40fae6edc84 100644 --- a/drivers/platform/x86/pmc_atom.c +++ b/drivers/platform/x86/pmc_atom.c @@ -13,6 +13,7 @@ #include <linux/io.h> #include <linux/platform_data/x86/clk-pmc-atom.h> #include <linux/platform_data/x86/pmc_atom.h> +#include <linux/platform_data/x86/simatic-ipc.h> #include <linux/platform_device.h> #include <linux/pci.h> #include <linux/seq_file.h> @@ -362,6 +363,30 @@ static void pmc_dbgfs_register(struct pmc_dev *pmc) } #endif /* CONFIG_DEBUG_FS */ +static bool pmc_clk_is_critical = true; + +static int dmi_callback(const struct dmi_system_id *d) +{ + pr_info("%s critclks quirk enabled\n", d->ident); + + return 1; +} + +static int dmi_callback_siemens(const struct dmi_system_id *d) +{ + u32 st_id; + + if (dmi_walk(simatic_ipc_find_dmi_entry_helper, &st_id)) + goto out; + + if (st_id == SIMATIC_IPC_IPC227E || st_id == SIMATIC_IPC_IPC277E) + return dmi_callback(d); + +out: + pmc_clk_is_critical = false; + return 1; +} + /* * Some systems need one or more of their pmc_plt_clks to be * marked as critical. @@ -370,6 +395,7 @@ static const struct dmi_system_id critclk_systems[] = { { /* pmc_plt_clk0 is used for an external HSIC USB HUB */ .ident = "MPL CEC1x", + .callback = dmi_callback, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "MPL AG"), DMI_MATCH(DMI_PRODUCT_NAME, "CEC10 Family"), @@ -378,6 +404,7 @@ static const struct dmi_system_id critclk_systems[] = { { /* pmc_plt_clk0 - 3 are used for the 4 ethernet controllers */ .ident = "Lex 3I380D", + .callback = dmi_callback, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Lex BayTrail"), DMI_MATCH(DMI_PRODUCT_NAME, "3I380D"), @@ -386,6 +413,7 @@ static const struct dmi_system_id critclk_systems[] = { { /* pmc_plt_clk* - are used for ethernet controllers */ .ident = "Lex 2I385SW", + .callback = dmi_callback, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Lex BayTrail"), DMI_MATCH(DMI_PRODUCT_NAME, "2I385SW"), @@ -394,30 +422,17 @@ static const struct dmi_system_id critclk_systems[] = { { /* pmc_plt_clk* - are used for ethernet controllers */ .ident = "Beckhoff Baytrail", + .callback = dmi_callback, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"), DMI_MATCH(DMI_PRODUCT_FAMILY, "CBxx63"), }, }, { - .ident = "SIMATIC IPC227E", + .ident = "SIEMENS AG", + .callback = dmi_callback_siemens, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SIEMENS AG"), - DMI_MATCH(DMI_PRODUCT_VERSION, "6ES7647-8B"), - }, - }, - { - .ident = "SIMATIC IPC277E", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SIEMENS AG"), - DMI_MATCH(DMI_PRODUCT_VERSION, "6AV7882-0"), - }, - }, - { - .ident = "CONNECT X300", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SIEMENS AG"), - DMI_MATCH(DMI_PRODUCT_VERSION, "A5E45074588"), }, }, @@ -429,7 +444,6 @@ static int pmc_setup_clks(struct pci_dev *pdev, void __iomem *pmc_regmap, { struct platform_device *clkdev; struct pmc_clk_data *clk_data; - const struct dmi_system_id *d = dmi_first_match(critclk_systems); clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL); if (!clk_data) @@ -437,10 +451,8 @@ static int pmc_setup_clks(struct pci_dev *pdev, void __iomem *pmc_regmap, clk_data->base = pmc_regmap; /* offset is added by client */ clk_data->clks = pmc_data->clks; - if (d) { - clk_data->critical = true; - pr_info("%s critclks quirk enabled\n", d->ident); - } + if (dmi_check_system(critclk_systems)) + clk_data->critical = pmc_clk_is_critical; clkdev = platform_device_register_data(&pdev->dev, "clk-pmc-atom", PLATFORM_DEVID_NONE, diff --git a/drivers/platform/x86/simatic-ipc.c b/drivers/platform/x86/simatic-ipc.c new file mode 100644 index 000000000000..b599cda5ba3c --- /dev/null +++ b/drivers/platform/x86/simatic-ipc.c @@ -0,0 +1,176 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Siemens SIMATIC IPC platform driver + * + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Henning Schild <henning.schild@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> + * Gerd Haeussler <gerd.haeussler.ext@siemens.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/dmi.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_data/x86/simatic-ipc.h> +#include <linux/platform_device.h> + +static struct platform_device *ipc_led_platform_device; +static struct platform_device *ipc_wdt_platform_device; + +static const struct dmi_system_id simatic_ipc_whitelist[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SIEMENS AG"), + }, + }, + {} +}; + +static struct simatic_ipc_platform platform_data; + +static struct { + u32 station_id; + u8 led_mode; + u8 wdt_mode; +} device_modes[] = { + {SIMATIC_IPC_IPC127E, SIMATIC_IPC_DEVICE_127E, SIMATIC_IPC_DEVICE_NONE}, + {SIMATIC_IPC_IPC227D, SIMATIC_IPC_DEVICE_227D, SIMATIC_IPC_DEVICE_NONE}, + {SIMATIC_IPC_IPC227E, SIMATIC_IPC_DEVICE_427E, SIMATIC_IPC_DEVICE_227E}, + {SIMATIC_IPC_IPC277E, SIMATIC_IPC_DEVICE_NONE, SIMATIC_IPC_DEVICE_227E}, + {SIMATIC_IPC_IPC427D, SIMATIC_IPC_DEVICE_427E, SIMATIC_IPC_DEVICE_NONE}, + {SIMATIC_IPC_IPC427E, SIMATIC_IPC_DEVICE_427E, SIMATIC_IPC_DEVICE_427E}, + {SIMATIC_IPC_IPC477E, SIMATIC_IPC_DEVICE_NONE, SIMATIC_IPC_DEVICE_427E}, +}; + +static int register_platform_devices(u32 station_id) +{ + u8 ledmode = SIMATIC_IPC_DEVICE_NONE; + u8 wdtmode = SIMATIC_IPC_DEVICE_NONE; + int i; + + platform_data.devmode = SIMATIC_IPC_DEVICE_NONE; + + for (i = 0; i < ARRAY_SIZE(device_modes); i++) { + if (device_modes[i].station_id == station_id) { + ledmode = device_modes[i].led_mode; + wdtmode = device_modes[i].wdt_mode; + break; + } + } + + if (ledmode != SIMATIC_IPC_DEVICE_NONE) { + platform_data.devmode = ledmode; + ipc_led_platform_device = + platform_device_register_data(NULL, + KBUILD_MODNAME "_leds", PLATFORM_DEVID_NONE, + &platform_data, + sizeof(struct simatic_ipc_platform)); + if (IS_ERR(ipc_led_platform_device)) + return PTR_ERR(ipc_led_platform_device); + + pr_debug("device=%s created\n", + ipc_led_platform_device->name); + } + + if (wdtmode != SIMATIC_IPC_DEVICE_NONE) { + platform_data.devmode = wdtmode; + ipc_wdt_platform_device = + platform_device_register_data(NULL, + KBUILD_MODNAME "_wdt", PLATFORM_DEVID_NONE, + &platform_data, + sizeof(struct simatic_ipc_platform)); + if (IS_ERR(ipc_wdt_platform_device)) + return PTR_ERR(ipc_wdt_platform_device); + + pr_debug("device=%s created\n", + ipc_wdt_platform_device->name); + } + + if (ledmode == SIMATIC_IPC_DEVICE_NONE && + wdtmode == SIMATIC_IPC_DEVICE_NONE) { + pr_warn("unsupported IPC detected, station id=%08x\n", + station_id); + return -EINVAL; + } + + return 0; +} + +/* FIXME: this should eventually be done with generic P2SB discovery code + * the individual drivers for watchdogs and LEDs access memory that implements + * GPIO, but pinctrl will not come up because of missing ACPI entries + * + * While there is no conflict a cleaner solution would be to somehow bring up + * pinctrl even with these ACPI entries missing, and base the drivers on pinctrl. + * After which the following function could be dropped, together with the code + * poking the memory. + */ +/* + * Get membase address from PCI, used in leds and wdt module. Here we read + * the bar0. The final address calculation is done in the appropriate modules + */ +u32 simatic_ipc_get_membase0(unsigned int p2sb) +{ + struct pci_bus *bus; + u32 bar0 = 0; + /* + * The GPIO memory is in bar0 of the hidden P2SB device. + * Unhide the device to have a quick look at it, before we hide it + * again. + * Also grab the pci rescan lock so that device does not get discovered + * and remapped while it is visible. + * This code is inspired by drivers/mfd/lpc_ich.c + */ + bus = pci_find_bus(0, 0); + pci_lock_rescan_remove(); + pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x0); + pci_bus_read_config_dword(bus, p2sb, PCI_BASE_ADDRESS_0, &bar0); + + bar0 &= ~0xf; + pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x1); + pci_unlock_rescan_remove(); + + return bar0; +} +EXPORT_SYMBOL(simatic_ipc_get_membase0); + +static int __init simatic_ipc_init_module(void) +{ + const struct dmi_system_id *match; + u32 station_id; + int err; + + match = dmi_first_match(simatic_ipc_whitelist); + if (!match) + return 0; + + err = dmi_walk(simatic_ipc_find_dmi_entry_helper, &station_id); + + if (err || station_id == SIMATIC_IPC_INVALID_STATION_ID) { + pr_warn("DMI entry %d not found\n", SIMATIC_IPC_DMI_ENTRY_OEM); + return 0; + } + + return register_platform_devices(station_id); +} + +static void __exit simatic_ipc_exit_module(void) +{ + platform_device_unregister(ipc_led_platform_device); + ipc_led_platform_device = NULL; + + platform_device_unregister(ipc_wdt_platform_device); + ipc_wdt_platform_device = NULL; +} + +module_init(simatic_ipc_init_module); +module_exit(simatic_ipc_exit_module); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Gerd Haeussler <gerd.haeussler.ext@siemens.com>"); +MODULE_ALIAS("dmi:*:svnSIEMENSAG:*"); diff --git a/drivers/platform/x86/think-lmi.c b/drivers/platform/x86/think-lmi.c index c4d9c45350f7..0b73e16cccea 100644 --- a/drivers/platform/x86/think-lmi.c +++ b/drivers/platform/x86/think-lmi.c @@ -128,8 +128,23 @@ MODULE_PARM_DESC(debug_support, "Enable debug command support"); */ #define LENOVO_DEBUG_CMD_GUID "7FF47003-3B6C-4E5E-A227-E979824A85D1" +/* + * Name: + * Lenovo_OpcodeIF + * Description: + * Opcode interface which provides the ability to set multiple + * parameters and then trigger an action with a final command. + * This is particularly useful for simplifying setting passwords. + * With this support comes the ability to set System, HDD and NVMe + * passwords. + * This is currently available on ThinkCenter and ThinkStations platforms + */ +#define LENOVO_OPCODE_IF_GUID "DFDDEF2C-57D4-48ce-B196-0FB787D90836" + #define TLMI_POP_PWD (1 << 0) #define TLMI_PAP_PWD (1 << 1) +#define TLMI_HDD_PWD (1 << 2) +#define TLMI_SYS_PWD (1 << 3) #define to_tlmi_pwd_setting(kobj) container_of(kobj, struct tlmi_pwd_setting, kobj) #define to_tlmi_attr_setting(kobj) container_of(kobj, struct tlmi_attr_setting, kobj) @@ -145,6 +160,10 @@ static const char * const encoding_options[] = { [TLMI_ENCODING_ASCII] = "ascii", [TLMI_ENCODING_SCANCODE] = "scancode", }; +static const char * const level_options[] = { + [TLMI_LEVEL_USER] = "user", + [TLMI_LEVEL_MASTER] = "master", +}; static struct think_lmi tlmi_priv; static struct class *fw_attr_class; @@ -233,6 +252,7 @@ static int tlmi_get_pwd_settings(struct tlmi_pwdcfg *pwdcfg) struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; const union acpi_object *obj; acpi_status status; + int copy_size; if (!tlmi_priv.can_get_password_settings) return -EOPNOTSUPP; @@ -253,14 +273,21 @@ static int tlmi_get_pwd_settings(struct tlmi_pwdcfg *pwdcfg) * The size of thinkpad_wmi_pcfg on ThinkStation is larger than ThinkPad. * To make the driver compatible on different brands, we permit it to get * the data in below case. + * Settings must have at minimum the core fields available */ - if (obj->buffer.length < sizeof(struct tlmi_pwdcfg)) { + if (obj->buffer.length < sizeof(struct tlmi_pwdcfg_core)) { pr_warn("Unknown pwdcfg buffer length %d\n", obj->buffer.length); kfree(obj); return -EIO; } - memcpy(pwdcfg, obj->buffer.pointer, sizeof(struct tlmi_pwdcfg)); + + copy_size = obj->buffer.length < sizeof(struct tlmi_pwdcfg) ? + obj->buffer.length : sizeof(struct tlmi_pwdcfg); + memcpy(pwdcfg, obj->buffer.pointer, copy_size); kfree(obj); + + if (WARN_ON(pwdcfg->core.max_length >= TLMI_PWD_BUFSIZE)) + pwdcfg->core.max_length = TLMI_PWD_BUFSIZE - 1; return 0; } @@ -270,6 +297,20 @@ static int tlmi_save_bios_settings(const char *password) password); } +static int tlmi_opcode_setting(char *setting, const char *value) +{ + char *opcode_str; + int ret; + + opcode_str = kasprintf(GFP_KERNEL, "%s:%s;", setting, value); + if (!opcode_str) + return -ENOMEM; + + ret = tlmi_simple_call(LENOVO_OPCODE_IF_GUID, opcode_str); + kfree(opcode_str); + return ret; +} + static int tlmi_setting(int item, char **value, const char *guid_string) { struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -370,16 +411,54 @@ static ssize_t new_password_store(struct kobject *kobj, goto out; } - /* Format: 'PasswordType,CurrentPw,NewPw,Encoding,KbdLang;' */ - auth_str = kasprintf(GFP_KERNEL, "%s,%s,%s,%s,%s;", - setting->pwd_type, setting->password, new_pwd, - encoding_options[setting->encoding], setting->kbdlang); - if (!auth_str) { - ret = -ENOMEM; - goto out; + /* If opcode support is present use that interface */ + if (tlmi_priv.opcode_support) { + char pwd_type[8]; + + /* Special handling required for HDD and NVMe passwords */ + if (setting == tlmi_priv.pwd_hdd) { + if (setting->level == TLMI_LEVEL_USER) + sprintf(pwd_type, "uhdp%d", setting->index); + else + sprintf(pwd_type, "mhdp%d", setting->index); + } else if (setting == tlmi_priv.pwd_nvme) { + if (setting->level == TLMI_LEVEL_USER) + sprintf(pwd_type, "unvp%d", setting->index); + else + sprintf(pwd_type, "mnvp%d", setting->index); + } else { + sprintf(pwd_type, "%s", setting->pwd_type); + } + + ret = tlmi_opcode_setting("WmiOpcodePasswordType", pwd_type); + if (ret) + goto out; + + if (tlmi_priv.pwd_admin->valid) { + ret = tlmi_opcode_setting("WmiOpcodePasswordAdmin", + tlmi_priv.pwd_admin->password); + if (ret) + goto out; + } + ret = tlmi_opcode_setting("WmiOpcodePasswordCurrent01", setting->password); + if (ret) + goto out; + ret = tlmi_opcode_setting("WmiOpcodePasswordNew01", new_pwd); + if (ret) + goto out; + ret = tlmi_simple_call(LENOVO_OPCODE_IF_GUID, "WmiOpcodePasswordSetUpdate;"); + } else { + /* Format: 'PasswordType,CurrentPw,NewPw,Encoding,KbdLang;' */ + auth_str = kasprintf(GFP_KERNEL, "%s,%s,%s,%s,%s;", + setting->pwd_type, setting->password, new_pwd, + encoding_options[setting->encoding], setting->kbdlang); + if (!auth_str) { + ret = -ENOMEM; + goto out; + } + ret = tlmi_simple_call(LENOVO_SET_BIOS_PASSWORD_GUID, auth_str); + kfree(auth_str); } - ret = tlmi_simple_call(LENOVO_SET_BIOS_PASSWORD_GUID, auth_str); - kfree(auth_str); out: kfree(new_pwd); return ret ?: count; @@ -475,6 +554,75 @@ static ssize_t role_show(struct kobject *kobj, struct kobj_attribute *attr, } static struct kobj_attribute auth_role = __ATTR_RO(role); +static ssize_t index_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) +{ + struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj); + + return sysfs_emit(buf, "%d\n", setting->index); +} + +static ssize_t index_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t count) +{ + struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj); + int err, val; + + err = kstrtoint(buf, 10, &val); + if (err < 0) + return err; + + if (val < 0 || val > TLMI_INDEX_MAX) + return -EINVAL; + + setting->index = val; + return count; +} + +static struct kobj_attribute auth_index = __ATTR_RW(index); + +static ssize_t level_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) +{ + struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj); + + return sysfs_emit(buf, "%s\n", level_options[setting->level]); +} + +static ssize_t level_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t count) +{ + struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj); + int i; + + /* Scan for a matching profile */ + i = sysfs_match_string(level_options, buf); + if (i < 0) + return -EINVAL; + + setting->level = i; + return count; +} + +static struct kobj_attribute auth_level = __ATTR_RW(level); + +static umode_t auth_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj); + + /*We only want to display level and index settings on HDD/NVMe */ + if ((attr == (struct attribute *)&auth_index) || + (attr == (struct attribute *)&auth_level)) { + if ((setting == tlmi_priv.pwd_hdd) || (setting == tlmi_priv.pwd_nvme)) + return attr->mode; + return 0; + } + return attr->mode; +} + static struct attribute *auth_attrs[] = { &auth_is_pass_set.attr, &auth_min_pass_length.attr, @@ -485,10 +633,13 @@ static struct attribute *auth_attrs[] = { &auth_mechanism.attr, &auth_encoding.attr, &auth_kbdlang.attr, + &auth_index.attr, + &auth_level.attr, NULL }; static const struct attribute_group auth_attr_group = { + .is_visible = auth_attr_is_visible, .attrs = auth_attrs, }; @@ -752,6 +903,16 @@ static void tlmi_release_attr(void) kobject_put(&tlmi_priv.pwd_admin->kobj); sysfs_remove_group(&tlmi_priv.pwd_power->kobj, &auth_attr_group); kobject_put(&tlmi_priv.pwd_power->kobj); + + if (tlmi_priv.opcode_support) { + sysfs_remove_group(&tlmi_priv.pwd_system->kobj, &auth_attr_group); + kobject_put(&tlmi_priv.pwd_system->kobj); + sysfs_remove_group(&tlmi_priv.pwd_hdd->kobj, &auth_attr_group); + kobject_put(&tlmi_priv.pwd_hdd->kobj); + sysfs_remove_group(&tlmi_priv.pwd_nvme->kobj, &auth_attr_group); + kobject_put(&tlmi_priv.pwd_nvme->kobj); + } + kset_unregister(tlmi_priv.authentication_kset); } @@ -831,7 +992,7 @@ static int tlmi_sysfs_init(void) goto fail_create_attr; tlmi_priv.pwd_power->kobj.kset = tlmi_priv.authentication_kset; - ret = kobject_add(&tlmi_priv.pwd_power->kobj, NULL, "%s", "System"); + ret = kobject_add(&tlmi_priv.pwd_power->kobj, NULL, "%s", "Power-on"); if (ret) goto fail_create_attr; @@ -839,6 +1000,35 @@ static int tlmi_sysfs_init(void) if (ret) goto fail_create_attr; + if (tlmi_priv.opcode_support) { + tlmi_priv.pwd_system->kobj.kset = tlmi_priv.authentication_kset; + ret = kobject_add(&tlmi_priv.pwd_system->kobj, NULL, "%s", "System"); + if (ret) + goto fail_create_attr; + + ret = sysfs_create_group(&tlmi_priv.pwd_system->kobj, &auth_attr_group); + if (ret) + goto fail_create_attr; + + tlmi_priv.pwd_hdd->kobj.kset = tlmi_priv.authentication_kset; + ret = kobject_add(&tlmi_priv.pwd_hdd->kobj, NULL, "%s", "HDD"); + if (ret) + goto fail_create_attr; + + ret = sysfs_create_group(&tlmi_priv.pwd_hdd->kobj, &auth_attr_group); + if (ret) + goto fail_create_attr; + + tlmi_priv.pwd_nvme->kobj.kset = tlmi_priv.authentication_kset; + ret = kobject_add(&tlmi_priv.pwd_nvme->kobj, NULL, "%s", "NVMe"); + if (ret) + goto fail_create_attr; + + ret = sysfs_create_group(&tlmi_priv.pwd_nvme->kobj, &auth_attr_group); + if (ret) + goto fail_create_attr; + } + return ret; fail_create_attr: @@ -851,9 +1041,30 @@ fail_class_created: } /* ---- Base Driver -------------------------------------------------------- */ +static struct tlmi_pwd_setting *tlmi_create_auth(const char *pwd_type, + const char *pwd_role) +{ + struct tlmi_pwd_setting *new_pwd; + + new_pwd = kzalloc(sizeof(struct tlmi_pwd_setting), GFP_KERNEL); + if (!new_pwd) + return NULL; + + strscpy(new_pwd->kbdlang, "us", TLMI_LANG_MAXLEN); + new_pwd->encoding = TLMI_ENCODING_ASCII; + new_pwd->pwd_type = pwd_type; + new_pwd->role = pwd_role; + new_pwd->minlen = tlmi_priv.pwdcfg.core.min_length; + new_pwd->maxlen = tlmi_priv.pwdcfg.core.max_length; + new_pwd->index = 0; + + kobject_init(&new_pwd->kobj, &tlmi_pwd_setting_ktype); + + return new_pwd; +} + static int tlmi_analyze(void) { - struct tlmi_pwdcfg pwdcfg; acpi_status status; int i, ret; @@ -873,6 +1084,9 @@ static int tlmi_analyze(void) if (wmi_has_guid(LENOVO_DEBUG_CMD_GUID)) tlmi_priv.can_debug_cmd = true; + if (wmi_has_guid(LENOVO_OPCODE_IF_GUID)) + tlmi_priv.opcode_support = true; + /* * Try to find the number of valid settings of this machine * and use it to create sysfs attributes. @@ -923,49 +1137,69 @@ static int tlmi_analyze(void) } /* Create password setting structure */ - ret = tlmi_get_pwd_settings(&pwdcfg); + ret = tlmi_get_pwd_settings(&tlmi_priv.pwdcfg); if (ret) goto fail_clear_attr; - tlmi_priv.pwd_admin = kzalloc(sizeof(struct tlmi_pwd_setting), GFP_KERNEL); - if (!tlmi_priv.pwd_admin) { - ret = -ENOMEM; + /* All failures below boil down to kmalloc failures */ + ret = -ENOMEM; + + tlmi_priv.pwd_admin = tlmi_create_auth("pap", "bios-admin"); + if (!tlmi_priv.pwd_admin) goto fail_clear_attr; - } - strscpy(tlmi_priv.pwd_admin->kbdlang, "us", TLMI_LANG_MAXLEN); - tlmi_priv.pwd_admin->encoding = TLMI_ENCODING_ASCII; - tlmi_priv.pwd_admin->pwd_type = "pap"; - tlmi_priv.pwd_admin->role = "bios-admin"; - tlmi_priv.pwd_admin->minlen = pwdcfg.min_length; - if (WARN_ON(pwdcfg.max_length >= TLMI_PWD_BUFSIZE)) - pwdcfg.max_length = TLMI_PWD_BUFSIZE - 1; - tlmi_priv.pwd_admin->maxlen = pwdcfg.max_length; - if (pwdcfg.password_state & TLMI_PAP_PWD) + + if (tlmi_priv.pwdcfg.core.password_state & TLMI_PAP_PWD) tlmi_priv.pwd_admin->valid = true; - kobject_init(&tlmi_priv.pwd_admin->kobj, &tlmi_pwd_setting_ktype); + tlmi_priv.pwd_power = tlmi_create_auth("pop", "power-on"); + if (!tlmi_priv.pwd_power) + goto fail_clear_attr; - tlmi_priv.pwd_power = kzalloc(sizeof(struct tlmi_pwd_setting), GFP_KERNEL); - if (!tlmi_priv.pwd_power) { - ret = -ENOMEM; - goto fail_free_pwd_admin; - } - strscpy(tlmi_priv.pwd_power->kbdlang, "us", TLMI_LANG_MAXLEN); - tlmi_priv.pwd_power->encoding = TLMI_ENCODING_ASCII; - tlmi_priv.pwd_power->pwd_type = "pop"; - tlmi_priv.pwd_power->role = "power-on"; - tlmi_priv.pwd_power->minlen = pwdcfg.min_length; - tlmi_priv.pwd_power->maxlen = pwdcfg.max_length; - - if (pwdcfg.password_state & TLMI_POP_PWD) + if (tlmi_priv.pwdcfg.core.password_state & TLMI_POP_PWD) tlmi_priv.pwd_power->valid = true; - kobject_init(&tlmi_priv.pwd_power->kobj, &tlmi_pwd_setting_ktype); + if (tlmi_priv.opcode_support) { + tlmi_priv.pwd_system = tlmi_create_auth("sys", "system"); + if (!tlmi_priv.pwd_system) + goto fail_clear_attr; + + if (tlmi_priv.pwdcfg.core.password_state & TLMI_SYS_PWD) + tlmi_priv.pwd_system->valid = true; + tlmi_priv.pwd_hdd = tlmi_create_auth("hdd", "hdd"); + if (!tlmi_priv.pwd_hdd) + goto fail_clear_attr; + + tlmi_priv.pwd_nvme = tlmi_create_auth("nvm", "nvme"); + if (!tlmi_priv.pwd_nvme) + goto fail_clear_attr; + + if (tlmi_priv.pwdcfg.core.password_state & TLMI_HDD_PWD) { + /* Check if PWD is configured and set index to first drive found */ + if (tlmi_priv.pwdcfg.ext.hdd_user_password || + tlmi_priv.pwdcfg.ext.hdd_master_password) { + tlmi_priv.pwd_hdd->valid = true; + if (tlmi_priv.pwdcfg.ext.hdd_master_password) + tlmi_priv.pwd_hdd->index = + ffs(tlmi_priv.pwdcfg.ext.hdd_master_password) - 1; + else + tlmi_priv.pwd_hdd->index = + ffs(tlmi_priv.pwdcfg.ext.hdd_user_password) - 1; + } + if (tlmi_priv.pwdcfg.ext.nvme_user_password || + tlmi_priv.pwdcfg.ext.nvme_master_password) { + tlmi_priv.pwd_nvme->valid = true; + if (tlmi_priv.pwdcfg.ext.nvme_master_password) + tlmi_priv.pwd_nvme->index = + ffs(tlmi_priv.pwdcfg.ext.nvme_master_password) - 1; + else + tlmi_priv.pwd_nvme->index = + ffs(tlmi_priv.pwdcfg.ext.nvme_user_password) - 1; + } + } + } return 0; -fail_free_pwd_admin: - kfree(tlmi_priv.pwd_admin); fail_clear_attr: for (i = 0; i < TLMI_SETTINGS_COUNT; ++i) { if (tlmi_priv.setting[i]) { @@ -973,6 +1207,11 @@ fail_clear_attr: kfree(tlmi_priv.setting[i]); } } + kfree(tlmi_priv.pwd_admin); + kfree(tlmi_priv.pwd_power); + kfree(tlmi_priv.pwd_system); + kfree(tlmi_priv.pwd_hdd); + kfree(tlmi_priv.pwd_nvme); return ret; } diff --git a/drivers/platform/x86/think-lmi.h b/drivers/platform/x86/think-lmi.h index 2ce5086a5af2..e46c7f383353 100644 --- a/drivers/platform/x86/think-lmi.h +++ b/drivers/platform/x86/think-lmi.h @@ -9,6 +9,7 @@ #define TLMI_SETTINGS_MAXLEN 512 #define TLMI_PWD_BUFSIZE 129 #define TLMI_LANG_MAXLEN 4 +#define TLMI_INDEX_MAX 32 /* Possible error values */ struct tlmi_err_codes { @@ -21,8 +22,13 @@ enum encoding_option { TLMI_ENCODING_SCANCODE, }; +enum level_option { + TLMI_LEVEL_USER, + TLMI_LEVEL_MASTER, +}; + /* password configuration details */ -struct tlmi_pwdcfg { +struct tlmi_pwdcfg_core { uint32_t password_mode; uint32_t password_state; uint32_t min_length; @@ -31,6 +37,18 @@ struct tlmi_pwdcfg { uint32_t supported_keyboard; }; +struct tlmi_pwdcfg_ext { + uint32_t hdd_user_password; + uint32_t hdd_master_password; + uint32_t nvme_user_password; + uint32_t nvme_master_password; +}; + +struct tlmi_pwdcfg { + struct tlmi_pwdcfg_core core; + struct tlmi_pwdcfg_ext ext; +}; + /* password setting details */ struct tlmi_pwd_setting { struct kobject kobj; @@ -42,6 +60,8 @@ struct tlmi_pwd_setting { int maxlen; enum encoding_option encoding; char kbdlang[TLMI_LANG_MAXLEN]; + int index; /*Used for HDD and NVME auth */ + enum level_option level; }; /* Attribute setting details */ @@ -61,13 +81,19 @@ struct think_lmi { bool can_get_password_settings; bool pending_changes; bool can_debug_cmd; + bool opcode_support; struct tlmi_attr_setting *setting[TLMI_SETTINGS_COUNT]; struct device *class_dev; struct kset *attribute_kset; struct kset *authentication_kset; + + struct tlmi_pwdcfg pwdcfg; struct tlmi_pwd_setting *pwd_admin; struct tlmi_pwd_setting *pwd_power; + struct tlmi_pwd_setting *pwd_system; + struct tlmi_pwd_setting *pwd_hdd; + struct tlmi_pwd_setting *pwd_nvme; }; #endif /* !_THINK_LMI_H_ */ diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 341655d711ce..82fa6148216c 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -334,12 +334,10 @@ static struct { u32 battery_force_primary:1; u32 input_device_registered:1; u32 platform_drv_registered:1; - u32 platform_drv_attrs_registered:1; u32 sensors_pdrv_registered:1; - u32 sensors_pdrv_attrs_registered:1; - u32 sensors_pdev_attrs_registered:1; u32 hotkey_poll_active:1; u32 has_adaptive_kbd:1; + u32 kbd_lang:1; } tp_features; static struct { @@ -985,20 +983,6 @@ static void tpacpi_shutdown_handler(struct platform_device *pdev) } } -static struct platform_driver tpacpi_pdriver = { - .driver = { - .name = TPACPI_DRVR_NAME, - .pm = &tpacpi_pm, - }, - .shutdown = tpacpi_shutdown_handler, -}; - -static struct platform_driver tpacpi_hwmon_pdriver = { - .driver = { - .name = TPACPI_HWMON_DRVR_NAME, - }, -}; - /************************************************************************* * sysfs support helpers */ @@ -1481,53 +1465,6 @@ static ssize_t uwb_emulstate_store(struct device_driver *drv, const char *buf, static DRIVER_ATTR_RW(uwb_emulstate); #endif -/* --------------------------------------------------------------------- */ - -static struct driver_attribute *tpacpi_driver_attributes[] = { - &driver_attr_debug_level, &driver_attr_version, - &driver_attr_interface_version, -}; - -static int __init tpacpi_create_driver_attributes(struct device_driver *drv) -{ - int i, res; - - i = 0; - res = 0; - while (!res && i < ARRAY_SIZE(tpacpi_driver_attributes)) { - res = driver_create_file(drv, tpacpi_driver_attributes[i]); - i++; - } - -#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES - if (!res && dbg_wlswemul) - res = driver_create_file(drv, &driver_attr_wlsw_emulstate); - if (!res && dbg_bluetoothemul) - res = driver_create_file(drv, &driver_attr_bluetooth_emulstate); - if (!res && dbg_wwanemul) - res = driver_create_file(drv, &driver_attr_wwan_emulstate); - if (!res && dbg_uwbemul) - res = driver_create_file(drv, &driver_attr_uwb_emulstate); -#endif - - return res; -} - -static void tpacpi_remove_driver_attributes(struct device_driver *drv) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(tpacpi_driver_attributes); i++) - driver_remove_file(drv, tpacpi_driver_attributes[i]); - -#ifdef THINKPAD_ACPI_DEBUGFACILITIES - driver_remove_file(drv, &driver_attr_wlsw_emulstate); - driver_remove_file(drv, &driver_attr_bluetooth_emulstate); - driver_remove_file(drv, &driver_attr_wwan_emulstate); - driver_remove_file(drv, &driver_attr_uwb_emulstate); -#endif -} - /************************************************************************* * Firmware Data */ @@ -3001,7 +2938,14 @@ static struct attribute *adaptive_kbd_attributes[] = { NULL }; +static umode_t hadaptive_kbd_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + return tp_features.has_adaptive_kbd ? attr->mode : 0; +} + static const struct attribute_group adaptive_kbd_attr_group = { + .is_visible = hadaptive_kbd_attr_is_visible, .attrs = adaptive_kbd_attributes, }; @@ -3098,8 +3042,6 @@ static void hotkey_exit(void) hotkey_poll_stop_sync(); mutex_unlock(&hotkey_mutex); #endif - sysfs_remove_group(&tpacpi_pdev->dev.kobj, &hotkey_attr_group); - dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY, "restoring original HKEY status and mask\n"); /* yes, there is a bitwise or below, we want the @@ -3438,7 +3380,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) str_supported(tp_features.hotkey)); if (!tp_features.hotkey) - return 1; + return -ENODEV; quirks = tpacpi_check_quirks(tpacpi_hotkey_qtable, ARRAY_SIZE(tpacpi_hotkey_qtable)); @@ -3494,14 +3436,8 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) */ if (acpi_evalf(hkey_handle, &hotkey_adaptive_all_mask, "MHKA", "dd", 2)) { - if (hotkey_adaptive_all_mask != 0) { + if (hotkey_adaptive_all_mask != 0) tp_features.has_adaptive_kbd = true; - res = sysfs_create_group( - &tpacpi_pdev->dev.kobj, - &adaptive_kbd_attr_group); - if (res) - goto err_exit; - } } else { tp_features.has_adaptive_kbd = false; hotkey_adaptive_all_mask = 0x0U; @@ -3531,7 +3467,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) * the first hotkey_mask_get to return hotkey_orig_mask */ res = hotkey_mask_get(); if (res) - goto err_exit; + return res; hotkey_orig_mask = hotkey_acpi_mask; } else { @@ -3555,9 +3491,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) } tabletsw_state = hotkey_init_tablet_mode(); - res = sysfs_create_group(&tpacpi_pdev->dev.kobj, &hotkey_attr_group); - if (res) - goto err_exit; /* Set up key map */ keymap_id = tpacpi_check_quirks(tpacpi_keymap_qtable, @@ -3570,8 +3503,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) TPACPI_HOTKEY_MAP_SIZE, GFP_KERNEL); if (!hotkey_keycode_map) { pr_err("failed to allocate memory for key map\n"); - res = -ENOMEM; - goto err_exit; + return -ENOMEM; } input_set_capability(tpacpi_inputdev, EV_MSC, MSC_SCAN); @@ -3652,12 +3584,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) hotkey_poll_setup_safe(true); return 0; - -err_exit: - sysfs_remove_group(&tpacpi_pdev->dev.kobj, &hotkey_attr_group); - sysfs_remove_group(&tpacpi_pdev->dev.kobj, &adaptive_kbd_attr_group); - - return (res < 0) ? res : 1; } /* Thinkpad X1 Carbon support 5 modes including Home mode, Web browser @@ -4402,7 +4328,14 @@ static struct attribute *bluetooth_attributes[] = { NULL }; +static umode_t bluetooth_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + return tp_features.bluetooth ? attr->mode : 0; +} + static const struct attribute_group bluetooth_attr_group = { + .is_visible = bluetooth_attr_is_visible, .attrs = bluetooth_attributes, }; @@ -4424,11 +4357,7 @@ static void bluetooth_shutdown(void) static void bluetooth_exit(void) { - sysfs_remove_group(&tpacpi_pdev->dev.kobj, - &bluetooth_attr_group); - tpacpi_destroy_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID); - bluetooth_shutdown(); } @@ -4535,24 +4464,14 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm) } if (!tp_features.bluetooth) - return 1; + return -ENODEV; res = tpacpi_new_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID, &bluetooth_tprfk_ops, RFKILL_TYPE_BLUETOOTH, TPACPI_RFK_BLUETOOTH_SW_NAME, true); - if (res) - return res; - - res = sysfs_create_group(&tpacpi_pdev->dev.kobj, - &bluetooth_attr_group); - if (res) { - tpacpi_destroy_rfkill(TPACPI_RFK_BLUETOOTH_SW_ID); - return res; - } - - return 0; + return res; } /* procfs -------------------------------------------------------------- */ @@ -4659,7 +4578,14 @@ static struct attribute *wan_attributes[] = { NULL }; +static umode_t wan_attr_is_visible(struct kobject *kobj, struct attribute *attr, + int n) +{ + return tp_features.wan ? attr->mode : 0; +} + static const struct attribute_group wan_attr_group = { + .is_visible = wan_attr_is_visible, .attrs = wan_attributes, }; @@ -4681,11 +4607,7 @@ static void wan_shutdown(void) static void wan_exit(void) { - sysfs_remove_group(&tpacpi_pdev->dev.kobj, - &wan_attr_group); - tpacpi_destroy_rfkill(TPACPI_RFK_WWAN_SW_ID); - wan_shutdown(); } @@ -4722,25 +4644,14 @@ static int __init wan_init(struct ibm_init_struct *iibm) } if (!tp_features.wan) - return 1; + return -ENODEV; res = tpacpi_new_rfkill(TPACPI_RFK_WWAN_SW_ID, &wan_tprfk_ops, RFKILL_TYPE_WWAN, TPACPI_RFK_WWAN_SW_NAME, true); - if (res) - return res; - - res = sysfs_create_group(&tpacpi_pdev->dev.kobj, - &wan_attr_group); - - if (res) { - tpacpi_destroy_rfkill(TPACPI_RFK_WWAN_SW_ID); - return res; - } - - return 0; + return res; } /* procfs -------------------------------------------------------------- */ @@ -4862,7 +4773,7 @@ static int __init uwb_init(struct ibm_init_struct *iibm) } if (!tp_features.uwb) - return 1; + return -ENODEV; res = tpacpi_new_rfkill(TPACPI_RFK_UWB_SW_ID, &uwb_tprfk_ops, @@ -4955,7 +4866,7 @@ static int __init video_init(struct ibm_init_struct *iibm) str_supported(video_supported != TPACPI_VIDEO_NONE), video_supported); - return (video_supported != TPACPI_VIDEO_NONE) ? 0 : 1; + return (video_supported != TPACPI_VIDEO_NONE) ? 0 : -ENODEV; } static void video_exit(void) @@ -5363,7 +5274,7 @@ static int __init kbdlight_init(struct ibm_init_struct *iibm) if (!kbdlight_is_supported()) { tp_features.kbdlight = 0; vdbg_printk(TPACPI_DBG_INIT, "kbdlight is unsupported\n"); - return 1; + return -ENODEV; } kbdlight_brightness = kbdlight_sysfs_get(NULL); @@ -5553,7 +5464,7 @@ static int __init light_init(struct ibm_init_struct *iibm) str_supported(tp_features.light_status)); if (!tp_features.light) - return 1; + return -ENODEV; rc = led_classdev_register(&tpacpi_pdev->dev, &tpacpi_led_thinklight.led_classdev); @@ -5641,30 +5552,35 @@ static ssize_t cmos_command_store(struct device *dev, static DEVICE_ATTR_WO(cmos_command); +static struct attribute *cmos_attributes[] = { + &dev_attr_cmos_command.attr, + NULL +}; + +static umode_t cmos_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + return cmos_handle ? attr->mode : 0; +} + +static const struct attribute_group cmos_attr_group = { + .is_visible = cmos_attr_is_visible, + .attrs = cmos_attributes, +}; + /* --------------------------------------------------------------------- */ static int __init cmos_init(struct ibm_init_struct *iibm) { - int res; - vdbg_printk(TPACPI_DBG_INIT, - "initializing cmos commands subdriver\n"); + "initializing cmos commands subdriver\n"); TPACPI_ACPIHANDLE_INIT(cmos); vdbg_printk(TPACPI_DBG_INIT, "cmos commands are %s\n", - str_supported(cmos_handle != NULL)); - - res = device_create_file(&tpacpi_pdev->dev, &dev_attr_cmos_command); - if (res) - return res; + str_supported(cmos_handle != NULL)); - return (cmos_handle) ? 0 : 1; -} - -static void cmos_exit(void) -{ - device_remove_file(&tpacpi_pdev->dev, &dev_attr_cmos_command); + return cmos_handle ? 0 : -ENODEV; } static int cmos_read(struct seq_file *m) @@ -5705,7 +5621,6 @@ static struct ibm_struct cmos_driver_data = { .name = "cmos", .read = cmos_read, .write = cmos_write, - .exit = cmos_exit, }; /************************************************************************* @@ -5910,6 +5825,7 @@ static int __init tpacpi_init_led(unsigned int led) tpacpi_leds[led].led_classdev.brightness_get = &led_sysfs_get; tpacpi_leds[led].led_classdev.name = tpacpi_led_names[led]; + tpacpi_leds[led].led_classdev.flags = LED_RETAIN_AT_SHUTDOWN; tpacpi_leds[led].led = led; return led_classdev_register(&tpacpi_pdev->dev, &tpacpi_leds[led].led_classdev); @@ -6010,7 +5926,7 @@ static int __init led_init(struct ibm_init_struct *iibm) str_supported(led_supported), led_supported); if (led_supported == TPACPI_LED_NONE) - return 1; + return -ENODEV; tpacpi_leds = kcalloc(TPACPI_LED_NUMLEDS, sizeof(*tpacpi_leds), GFP_KERNEL); @@ -6139,7 +6055,7 @@ static int __init beep_init(struct ibm_init_struct *iibm) tp_features.beep_needs_two_args = !!(quirks & TPACPI_BEEP_Q1); - return (beep_handle) ? 0 : 1; + return (beep_handle) ? 0 : -ENODEV; } static int beep_read(struct seq_file *m) @@ -6216,7 +6132,6 @@ struct ibm_thermal_sensors_struct { }; static enum thermal_access_mode thermal_read_mode; -static const struct attribute_group *thermal_attr_group; static bool thermal_use_labels; /* idx is zero-based */ @@ -6370,14 +6285,6 @@ static struct sensor_device_attribute sensor_dev_attr_thermal_temp_input[] = { &sensor_dev_attr_thermal_temp_input[X].dev_attr.attr static struct attribute *thermal_temp_input_attr[] = { - THERMAL_ATTRS(8), - THERMAL_ATTRS(9), - THERMAL_ATTRS(10), - THERMAL_ATTRS(11), - THERMAL_ATTRS(12), - THERMAL_ATTRS(13), - THERMAL_ATTRS(14), - THERMAL_ATTRS(15), THERMAL_ATTRS(0), THERMAL_ATTRS(1), THERMAL_ATTRS(2), @@ -6386,15 +6293,37 @@ static struct attribute *thermal_temp_input_attr[] = { THERMAL_ATTRS(5), THERMAL_ATTRS(6), THERMAL_ATTRS(7), + THERMAL_ATTRS(8), + THERMAL_ATTRS(9), + THERMAL_ATTRS(10), + THERMAL_ATTRS(11), + THERMAL_ATTRS(12), + THERMAL_ATTRS(13), + THERMAL_ATTRS(14), + THERMAL_ATTRS(15), NULL }; -static const struct attribute_group thermal_temp_input16_group = { - .attrs = thermal_temp_input_attr -}; +static umode_t thermal_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + if (thermal_read_mode == TPACPI_THERMAL_NONE) + return 0; -static const struct attribute_group thermal_temp_input8_group = { - .attrs = &thermal_temp_input_attr[8] + if (attr == THERMAL_ATTRS(8) || attr == THERMAL_ATTRS(9) || + attr == THERMAL_ATTRS(10) || attr == THERMAL_ATTRS(11) || + attr == THERMAL_ATTRS(12) || attr == THERMAL_ATTRS(13) || + attr == THERMAL_ATTRS(14) || attr == THERMAL_ATTRS(15)) { + if (thermal_read_mode != TPACPI_THERMAL_TPEC_16) + return 0; + } + + return attr->mode; +} + +static const struct attribute_group thermal_attr_group = { + .is_visible = thermal_attr_is_visible, + .attrs = thermal_temp_input_attr, }; #undef THERMAL_SENSOR_ATTR_TEMP @@ -6418,7 +6347,14 @@ static struct attribute *temp_label_attributes[] = { NULL }; +static umode_t temp_label_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + return thermal_use_labels ? attr->mode : 0; +} + static const struct attribute_group temp_label_attr_group = { + .is_visible = temp_label_attr_is_visible, .attrs = temp_label_attributes, }; @@ -6429,7 +6365,6 @@ static int __init thermal_init(struct ibm_init_struct *iibm) u8 t, ta1, ta2, ver = 0; int i; int acpi_tmp7; - int res; vdbg_printk(TPACPI_DBG_INIT, "initializing thermal subdriver\n"); @@ -6504,42 +6439,7 @@ static int __init thermal_init(struct ibm_init_struct *iibm) str_supported(thermal_read_mode != TPACPI_THERMAL_NONE), thermal_read_mode); - switch (thermal_read_mode) { - case TPACPI_THERMAL_TPEC_16: - thermal_attr_group = &thermal_temp_input16_group; - break; - case TPACPI_THERMAL_TPEC_8: - case TPACPI_THERMAL_ACPI_TMP07: - case TPACPI_THERMAL_ACPI_UPDT: - thermal_attr_group = &thermal_temp_input8_group; - break; - case TPACPI_THERMAL_NONE: - default: - return 1; - } - - res = sysfs_create_group(&tpacpi_hwmon->kobj, thermal_attr_group); - if (res) - return res; - - if (thermal_use_labels) { - res = sysfs_create_group(&tpacpi_hwmon->kobj, &temp_label_attr_group); - if (res) { - sysfs_remove_group(&tpacpi_hwmon->kobj, thermal_attr_group); - return res; - } - } - - return 0; -} - -static void thermal_exit(void) -{ - if (thermal_attr_group) - sysfs_remove_group(&tpacpi_hwmon->kobj, thermal_attr_group); - - if (thermal_use_labels) - sysfs_remove_group(&tpacpi_hwmon->kobj, &temp_label_attr_group); + return thermal_read_mode != TPACPI_THERMAL_NONE ? 0 : -ENODEV; } static int thermal_read(struct seq_file *m) @@ -6566,7 +6466,6 @@ static int thermal_read(struct seq_file *m) static struct ibm_struct thermal_driver_data = { .name = "thermal", .read = thermal_read, - .exit = thermal_exit, }; /************************************************************************* @@ -6951,25 +6850,25 @@ static int __init brightness_init(struct ibm_init_struct *iibm) /* if it is unknown, we don't handle it: it wouldn't be safe */ if (tp_features.bright_unkfw) - return 1; + return -ENODEV; if (!brightness_enable) { dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT, "brightness support disabled by module parameter\n"); - return 1; + return -ENODEV; } if (acpi_video_get_backlight_type() != acpi_backlight_vendor) { if (brightness_enable > 1) { pr_info("Standard ACPI backlight interface available, not loading native one\n"); - return 1; + return -ENODEV; } else if (brightness_enable == 1) { pr_warn("Cannot enable backlight brightness support, ACPI is already handling it. Refer to the acpi_backlight kernel parameter.\n"); - return 1; + return -ENODEV; } } else if (!tp_features.bright_acpimode) { pr_notice("ACPI backlight interface not available\n"); - return 1; + return -ENODEV; } pr_notice("ACPI native brightness control enabled\n"); @@ -7002,7 +6901,7 @@ static int __init brightness_init(struct ibm_init_struct *iibm) return -EINVAL; if (tpacpi_brightness_get_raw(&b) < 0) - return 1; + return -ENODEV; memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_PLATFORM; @@ -7592,7 +7491,7 @@ static int __init volume_create_alsa_mixer(void) sizeof(struct tpacpi_alsa_data), &card); if (rc < 0 || !card) { pr_err("Failed to create ALSA card structures: %d\n", rc); - return 1; + return -ENODEV; } BUG_ON(!card->private_data); @@ -7651,7 +7550,7 @@ static int __init volume_create_alsa_mixer(void) err_exit: snd_card_free(card); - return 1; + return -ENODEV; } #define TPACPI_VOL_Q_MUTEONLY 0x0001 /* Mute-only control available */ @@ -7700,7 +7599,7 @@ static int __init volume_init(struct ibm_init_struct *iibm) if (volume_mode == TPACPI_VOL_MODE_UCMS_STEP) { pr_err("UCMS step volume mode not implemented, please contact %s\n", TPACPI_MAIL); - return 1; + return -ENODEV; } if (volume_capabilities >= TPACPI_VOL_CAP_MAX) @@ -7713,7 +7612,7 @@ static int __init volume_init(struct ibm_init_struct *iibm) if (!alsa_enable) { vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_MIXER, "ALSA mixer disabled by parameter, not loading volume subdriver...\n"); - return 1; + return -ENODEV; } quirks = tpacpi_check_quirks(volume_quirk_table, @@ -7726,7 +7625,7 @@ static int __init volume_init(struct ibm_init_struct *iibm) else if (quirks & TPACPI_VOL_Q_LEVEL) tp_features.mixer_no_level_control = 0; else - return 1; /* no mixer */ + return -ENODEV; /* no mixer */ break; case TPACPI_VOL_CAP_VOLMUTE: tp_features.mixer_no_level_control = 0; @@ -7735,7 +7634,7 @@ static int __init volume_init(struct ibm_init_struct *iibm) tp_features.mixer_no_level_control = 1; break; default: - return 1; + return -ENODEV; } if (volume_capabilities != TPACPI_VOL_CAP_AUTO) @@ -7907,7 +7806,7 @@ static int __init volume_init(struct ibm_init_struct *iibm) { pr_info("volume: disabled as there is no ALSA support in this kernel\n"); - return 1; + return -ENODEV; } static struct ibm_struct volume_driver_data = { @@ -8741,17 +8640,45 @@ static ssize_t fan_watchdog_store(struct device_driver *drv, const char *buf, static DRIVER_ATTR_RW(fan_watchdog); /* --------------------------------------------------------------------- */ + static struct attribute *fan_attributes[] = { - &dev_attr_pwm1_enable.attr, &dev_attr_pwm1.attr, + &dev_attr_pwm1_enable.attr, + &dev_attr_pwm1.attr, &dev_attr_fan1_input.attr, - NULL, /* for fan2_input */ + &dev_attr_fan2_input.attr, NULL }; +static umode_t fan_attr_is_visible(struct kobject *kobj, struct attribute *attr, + int n) +{ + if (fan_status_access_mode == TPACPI_FAN_NONE && + fan_control_access_mode == TPACPI_FAN_WR_NONE) + return 0; + + if (attr == &dev_attr_fan2_input.attr) { + if (!tp_features.second_fan) + return 0; + } + + return attr->mode; +} + static const struct attribute_group fan_attr_group = { + .is_visible = fan_attr_is_visible, .attrs = fan_attributes, }; +static struct attribute *fan_driver_attributes[] = { + &driver_attr_fan_watchdog.attr, + NULL +}; + +static const struct attribute_group fan_driver_attr_group = { + .is_visible = fan_attr_is_visible, + .attrs = fan_driver_attributes, +}; + #define TPACPI_FAN_Q1 0x0001 /* Unitialized HFSP */ #define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */ #define TPACPI_FAN_2CTL 0x0004 /* selects fan2 control */ @@ -8779,7 +8706,6 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { static int __init fan_init(struct ibm_init_struct *iibm) { - int rc; unsigned long quirks; vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN, @@ -8826,7 +8752,7 @@ static int __init fan_init(struct ibm_init_struct *iibm) } } else { pr_err("ThinkPad ACPI EC access misbehaving, fan status and control unavailable\n"); - return 1; + return -ENODEV; } } @@ -8875,28 +8801,11 @@ static int __init fan_init(struct ibm_init_struct *iibm) if (fan_status_access_mode != TPACPI_FAN_NONE) fan_get_status_safe(NULL); - if (fan_status_access_mode != TPACPI_FAN_NONE || - fan_control_access_mode != TPACPI_FAN_WR_NONE) { - if (tp_features.second_fan) { - /* attach second fan tachometer */ - fan_attributes[ARRAY_SIZE(fan_attributes)-2] = - &dev_attr_fan2_input.attr; - } - rc = sysfs_create_group(&tpacpi_hwmon->kobj, - &fan_attr_group); - if (rc < 0) - return rc; + if (fan_status_access_mode == TPACPI_FAN_NONE && + fan_control_access_mode == TPACPI_FAN_WR_NONE) + return -ENODEV; - rc = driver_create_file(&tpacpi_hwmon_pdriver.driver, - &driver_attr_fan_watchdog); - if (rc < 0) { - sysfs_remove_group(&tpacpi_hwmon->kobj, - &fan_attr_group); - return rc; - } - return 0; - } else - return 1; + return 0; } static void fan_exit(void) @@ -8904,11 +8813,6 @@ static void fan_exit(void) vdbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_FAN, "cancelling any pending fan watchdog tasks\n"); - /* FIXME: can we really do this unconditionally? */ - sysfs_remove_group(&tpacpi_hwmon->kobj, &fan_attr_group); - driver_remove_file(&tpacpi_hwmon_pdriver.driver, - &driver_attr_fan_watchdog); - cancel_delayed_work(&fan_watchdog_task); flush_workqueue(tpacpi_wq); } @@ -9326,6 +9230,10 @@ static struct ibm_struct mute_led_driver_data = { #define SET_START "BCCS" #define GET_STOP "BCSG" #define SET_STOP "BCSS" +#define GET_DISCHARGE "BDSG" +#define SET_DISCHARGE "BDSS" +#define GET_INHIBIT "BICG" +#define SET_INHIBIT "BICS" enum { BAT_ANY = 0, @@ -9342,6 +9250,8 @@ enum { /* This is used in the get/set helpers */ THRESHOLD_START, THRESHOLD_STOP, + FORCE_DISCHARGE, + INHIBIT_CHARGE, }; struct tpacpi_battery_data { @@ -9349,6 +9259,7 @@ struct tpacpi_battery_data { int start_support; int charge_stop; int stop_support; + unsigned int charge_behaviours; }; struct tpacpi_battery_driver_data { @@ -9406,6 +9317,18 @@ static int tpacpi_battery_get(int what, int battery, int *ret) if (*ret == 0) *ret = 100; return 0; + case FORCE_DISCHARGE: + if ACPI_FAILURE(tpacpi_battery_acpi_eval(GET_DISCHARGE, ret, battery)) + return -ENODEV; + /* The force discharge status is in bit 0 */ + *ret = *ret & 0x01; + return 0; + case INHIBIT_CHARGE: + if ACPI_FAILURE(tpacpi_battery_acpi_eval(GET_INHIBIT, ret, battery)) + return -ENODEV; + /* The inhibit charge status is in bit 0 */ + *ret = *ret & 0x01; + return 0; default: pr_crit("wrong parameter: %d", what); return -EINVAL; @@ -9434,12 +9357,65 @@ static int tpacpi_battery_set(int what, int battery, int value) return -ENODEV; } return 0; + case FORCE_DISCHARGE: + /* Force discharge is in bit 0, + * break on AC attach is in bit 1 (won't work on some ThinkPads), + * battery ID is in bits 8-9, 2 bits. + */ + if (ACPI_FAILURE(tpacpi_battery_acpi_eval(SET_DISCHARGE, &ret, param))) { + pr_err("failed to set force discharge on %d", battery); + return -ENODEV; + } + return 0; + case INHIBIT_CHARGE: + /* When setting inhibit charge, we set a default value of + * always breaking on AC detach and the effective time is set to + * be permanent. + * The battery ID is in bits 4-5, 2 bits, + * the effective time is in bits 8-23, 2 bytes. + * A time of FFFF indicates forever. + */ + param = value; + param |= battery << 4; + param |= 0xFFFF << 8; + if (ACPI_FAILURE(tpacpi_battery_acpi_eval(SET_INHIBIT, &ret, param))) { + pr_err("failed to set inhibit charge on %d", battery); + return -ENODEV; + } + return 0; default: pr_crit("wrong parameter: %d", what); return -EINVAL; } } +static int tpacpi_battery_set_validate(int what, int battery, int value) +{ + int ret, v; + + ret = tpacpi_battery_set(what, battery, value); + if (ret < 0) + return ret; + + ret = tpacpi_battery_get(what, battery, &v); + if (ret < 0) + return ret; + + if (v == value) + return 0; + + msleep(500); + + ret = tpacpi_battery_get(what, battery, &v); + if (ret < 0) + return ret; + + if (v == value) + return 0; + + return -EIO; +} + static int tpacpi_battery_probe(int battery) { int ret = 0; @@ -9452,6 +9428,10 @@ static int tpacpi_battery_probe(int battery) * 2) Check for support * 3) Get the current stop threshold * 4) Check for support + * 5) Get the current force discharge status + * 6) Check for support + * 7) Get the current inhibit charge status + * 8) Check for support */ if (acpi_has_method(hkey_handle, GET_START)) { if ACPI_FAILURE(tpacpi_battery_acpi_eval(GET_START, &ret, battery)) { @@ -9488,10 +9468,35 @@ static int tpacpi_battery_probe(int battery) return -ENODEV; } } - pr_info("battery %d registered (start %d, stop %d)", - battery, - battery_info.batteries[battery].charge_start, - battery_info.batteries[battery].charge_stop); + if (acpi_has_method(hkey_handle, GET_DISCHARGE)) { + if (ACPI_FAILURE(tpacpi_battery_acpi_eval(GET_DISCHARGE, &ret, battery))) { + pr_err("Error probing battery discharge; %d\n", battery); + return -ENODEV; + } + /* Support is marked in bit 8 */ + if (ret & BIT(8)) + battery_info.batteries[battery].charge_behaviours |= + BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_FORCE_DISCHARGE); + } + if (acpi_has_method(hkey_handle, GET_INHIBIT)) { + if (ACPI_FAILURE(tpacpi_battery_acpi_eval(GET_INHIBIT, &ret, battery))) { + pr_err("Error probing battery inhibit charge; %d\n", battery); + return -ENODEV; + } + /* Support is marked in bit 5 */ + if (ret & BIT(5)) + battery_info.batteries[battery].charge_behaviours |= + BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE); + } + + battery_info.batteries[battery].charge_behaviours |= + BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO); + + pr_info("battery %d registered (start %d, stop %d, behaviours: 0x%x)\n", + battery, + battery_info.batteries[battery].charge_start, + battery_info.batteries[battery].charge_stop, + battery_info.batteries[battery].charge_behaviours); return 0; } @@ -9626,6 +9631,40 @@ static ssize_t charge_control_end_threshold_show(struct device *device, return tpacpi_battery_show(THRESHOLD_STOP, device, buf); } +static ssize_t charge_behaviour_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + enum power_supply_charge_behaviour active = POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO; + struct power_supply *supply = to_power_supply(dev); + unsigned int available; + int ret, battery; + + battery = tpacpi_battery_get_id(supply->desc->name); + available = battery_info.batteries[battery].charge_behaviours; + + if (available & BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_FORCE_DISCHARGE)) { + if (tpacpi_battery_get(FORCE_DISCHARGE, battery, &ret)) + return -ENODEV; + if (ret) { + active = POWER_SUPPLY_CHARGE_BEHAVIOUR_FORCE_DISCHARGE; + goto out; + } + } + + if (available & BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE)) { + if (tpacpi_battery_get(INHIBIT_CHARGE, battery, &ret)) + return -ENODEV; + if (ret) { + active = POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE; + goto out; + } + } + +out: + return power_supply_charge_behaviour_show(dev, available, active, buf); +} + static ssize_t charge_control_start_threshold_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -9640,8 +9679,55 @@ static ssize_t charge_control_end_threshold_store(struct device *dev, return tpacpi_battery_store(THRESHOLD_STOP, dev, buf, count); } +static ssize_t charge_behaviour_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct power_supply *supply = to_power_supply(dev); + int selected, battery, ret = 0; + unsigned int available; + + battery = tpacpi_battery_get_id(supply->desc->name); + available = battery_info.batteries[battery].charge_behaviours; + selected = power_supply_charge_behaviour_parse(available, buf); + + if (selected < 0) + return selected; + + switch (selected) { + case POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO: + if (available & BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_FORCE_DISCHARGE)) + ret = tpacpi_battery_set_validate(FORCE_DISCHARGE, battery, 0); + if (available & BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE)) + ret = min(ret, tpacpi_battery_set_validate(INHIBIT_CHARGE, battery, 0)); + if (ret < 0) + return ret; + break; + case POWER_SUPPLY_CHARGE_BEHAVIOUR_FORCE_DISCHARGE: + if (available & BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE)) + ret = tpacpi_battery_set_validate(INHIBIT_CHARGE, battery, 0); + ret = min(ret, tpacpi_battery_set_validate(FORCE_DISCHARGE, battery, 1)); + if (ret < 0) + return ret; + break; + case POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE: + if (available & BIT(POWER_SUPPLY_CHARGE_BEHAVIOUR_FORCE_DISCHARGE)) + ret = tpacpi_battery_set_validate(FORCE_DISCHARGE, battery, 0); + ret = min(ret, tpacpi_battery_set_validate(INHIBIT_CHARGE, battery, 1)); + if (ret < 0) + return ret; + break; + default: + dev_err(dev, "Unexpected charge behaviour: %d\n", selected); + return -EINVAL; + } + + return count; +} + static DEVICE_ATTR_RW(charge_control_start_threshold); static DEVICE_ATTR_RW(charge_control_end_threshold); +static DEVICE_ATTR_RW(charge_behaviour); static struct device_attribute dev_attr_charge_start_threshold = __ATTR( charge_start_threshold, 0644, @@ -9660,6 +9746,7 @@ static struct attribute *tpacpi_battery_attrs[] = { &dev_attr_charge_control_end_threshold.attr, &dev_attr_charge_start_threshold.attr, &dev_attr_charge_stop_threshold.attr, + &dev_attr_charge_behaviour.attr, NULL, }; @@ -9884,33 +9971,6 @@ static int dytc_command(int command, int *output) return 0; } -static int dytc_get_version(void) -{ - int err, output; - - /* Check if we've been called before - and just return cached value */ - if (dytc_version) - return dytc_version; - - /* Otherwise query DYTC and extract version information */ - err = dytc_command(DYTC_CMD_QUERY, &output); - /* - * If support isn't available (ENODEV) then don't return an error - * and don't create the sysfs group - */ - if (err == -ENODEV) - return 0; - /* For all other errors we can flag the failure */ - if (err) - return err; - - /* Check DYTC is enabled and supports mode setting */ - if (output & BIT(DYTC_QUERY_ENABLE_BIT)) - dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF; - - return 0; -} - static int lapsensor_get(bool *present, bool *state) { int output, err; @@ -9993,59 +10053,55 @@ static ssize_t palmsensor_show(struct device *dev, } static DEVICE_ATTR_RO(palmsensor); +static struct attribute *proxsensor_attributes[] = { + &dev_attr_dytc_lapmode.attr, + &dev_attr_palmsensor.attr, + NULL +}; + +static umode_t proxsensor_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + if (attr == &dev_attr_dytc_lapmode.attr) { + /* + * Platforms before DYTC version 5 claim to have a lap sensor, + * but it doesn't work, so we ignore them. + */ + if (!has_lapsensor || dytc_version < 5) + return 0; + } else if (attr == &dev_attr_palmsensor.attr) { + if (!has_palmsensor) + return 0; + } + + return attr->mode; +} + +static const struct attribute_group proxsensor_attr_group = { + .is_visible = proxsensor_attr_is_visible, + .attrs = proxsensor_attributes, +}; + static int tpacpi_proxsensor_init(struct ibm_init_struct *iibm) { - int palm_err, lap_err, err; + int palm_err, lap_err; palm_err = palmsensor_get(&has_palmsensor, &palm_state); lap_err = lapsensor_get(&has_lapsensor, &lap_state); - /* - * If support isn't available (ENODEV) for both devices then quit, but - * don't return an error. - */ + /* If support isn't available for both devices return -ENODEV */ if ((palm_err == -ENODEV) && (lap_err == -ENODEV)) - return 0; + return -ENODEV; /* Otherwise, if there was an error return it */ if (palm_err && (palm_err != -ENODEV)) return palm_err; if (lap_err && (lap_err != -ENODEV)) return lap_err; - if (has_palmsensor) { - err = sysfs_create_file(&tpacpi_pdev->dev.kobj, &dev_attr_palmsensor.attr); - if (err) - return err; - } - - /* Check if we know the DYTC version, if we don't then get it */ - if (!dytc_version) { - err = dytc_get_version(); - if (err) - return err; - } - /* - * Platforms before DYTC version 5 claim to have a lap sensor, but it doesn't work, so we - * ignore them - */ - if (has_lapsensor && (dytc_version >= 5)) { - err = sysfs_create_file(&tpacpi_pdev->dev.kobj, &dev_attr_dytc_lapmode.attr); - if (err) - return err; - } return 0; } -static void proxsensor_exit(void) -{ - if (has_lapsensor) - sysfs_remove_file(&tpacpi_pdev->dev.kobj, &dev_attr_dytc_lapmode.attr); - if (has_palmsensor) - sysfs_remove_file(&tpacpi_pdev->dev.kobj, &dev_attr_palmsensor.attr); -} - static struct ibm_struct proxsensor_driver_data = { .name = "proximity-sensor", - .exit = proxsensor_exit, }; /************************************************************************* @@ -10084,7 +10140,6 @@ static struct ibm_struct proxsensor_driver_data = { #define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 1) -static bool dytc_profile_available; static enum platform_profile_option dytc_current_profile; static atomic_t dytc_ignore_event = ATOMIC_INIT(0); static DEFINE_MUTEX(dytc_mutex); @@ -10188,9 +10243,6 @@ static int dytc_profile_set(struct platform_profile_handler *pprof, int output; int err; - if (!dytc_profile_available) - return -ENODEV; - err = mutex_lock_interruptible(&dytc_mutex); if (err) return err; @@ -10261,60 +10313,47 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm) set_bit(PLATFORM_PROFILE_BALANCED, dytc_profile.choices); set_bit(PLATFORM_PROFILE_PERFORMANCE, dytc_profile.choices); - dytc_profile_available = false; err = dytc_command(DYTC_CMD_QUERY, &output); - /* - * If support isn't available (ENODEV) then don't return an error - * and don't create the sysfs group - */ - if (err == -ENODEV) - return 0; - /* For all other errors we can flag the failure */ if (err) return err; - /* Check if we know the DYTC version, if we don't then get it */ - if (!dytc_version) { - err = dytc_get_version(); - if (err) - return err; - } + if (output & BIT(DYTC_QUERY_ENABLE_BIT)) + dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF; + /* Check DYTC is enabled and supports mode setting */ - if (dytc_version >= 5) { - dbg_printk(TPACPI_DBG_INIT, - "DYTC version %d: thermal mode available\n", dytc_version); - /* - * Check if MMC_GET functionality available - * Version > 6 and return success from MMC_GET command - */ - dytc_mmc_get_available = false; - if (dytc_version >= 6) { - err = dytc_command(DYTC_CMD_MMC_GET, &output); - if (!err && ((output & DYTC_ERR_MASK) == DYTC_ERR_SUCCESS)) - dytc_mmc_get_available = true; - } - /* Create platform_profile structure and register */ - err = platform_profile_register(&dytc_profile); - /* - * If for some reason platform_profiles aren't enabled - * don't quit terminally. - */ - if (err) - return 0; + if (dytc_version < 5) + return -ENODEV; - dytc_profile_available = true; - /* Ensure initial values are correct */ - dytc_profile_refresh(); + dbg_printk(TPACPI_DBG_INIT, + "DYTC version %d: thermal mode available\n", dytc_version); + /* + * Check if MMC_GET functionality available + * Version > 6 and return success from MMC_GET command + */ + dytc_mmc_get_available = false; + if (dytc_version >= 6) { + err = dytc_command(DYTC_CMD_MMC_GET, &output); + if (!err && ((output & DYTC_ERR_MASK) == DYTC_ERR_SUCCESS)) + dytc_mmc_get_available = true; } + /* Create platform_profile structure and register */ + err = platform_profile_register(&dytc_profile); + /* + * If for some reason platform_profiles aren't enabled + * don't quit terminally. + */ + if (err) + return -ENODEV; + + /* Ensure initial values are correct */ + dytc_profile_refresh(); + return 0; } static void dytc_profile_exit(void) { - if (dytc_profile_available) { - dytc_profile_available = false; - platform_profile_remove(); - } + platform_profile_remove(); } static struct ibm_struct dytc_profile_driver_data = { @@ -10462,7 +10501,14 @@ static struct attribute *kbdlang_attributes[] = { NULL }; +static umode_t kbdlang_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + return tp_features.kbd_lang ? attr->mode : 0; +} + static const struct attribute_group kbdlang_attr_group = { + .is_visible = kbdlang_attr_is_visible, .attrs = kbdlang_attributes, }; @@ -10471,28 +10517,12 @@ static int tpacpi_kbdlang_init(struct ibm_init_struct *iibm) int err, output; err = get_keyboard_lang(&output); - /* - * If support isn't available (ENODEV) then don't return an error - * just don't create the sysfs group. - */ - if (err == -ENODEV) - return 0; - - if (err) - return err; - - /* Platform supports this feature - create the sysfs file */ - return sysfs_create_group(&tpacpi_pdev->dev.kobj, &kbdlang_attr_group); -} - -static void kbdlang_exit(void) -{ - sysfs_remove_group(&tpacpi_pdev->dev.kobj, &kbdlang_attr_group); + tp_features.kbd_lang = !err; + return err; } static struct ibm_struct kbdlang_driver_data = { .name = "kbdlang", - .exit = kbdlang_exit, }; /************************************************************************* @@ -10563,41 +10593,134 @@ static ssize_t wwan_antenna_type_show(struct device *dev, } static DEVICE_ATTR_RO(wwan_antenna_type); -static int tpacpi_dprc_init(struct ibm_init_struct *iibm) +static struct attribute *dprc_attributes[] = { + &dev_attr_wwan_antenna_type.attr, + NULL +}; + +static umode_t dprc_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) { - int wwanantenna_err, err; + return has_antennatype ? attr->mode : 0; +} - wwanantenna_err = get_wwan_antenna(&wwan_antennatype); - /* - * If support isn't available (ENODEV) then quit, but don't - * return an error. - */ - if (wwanantenna_err == -ENODEV) - return 0; +static const struct attribute_group dprc_attr_group = { + .is_visible = dprc_attr_is_visible, + .attrs = dprc_attributes, +}; + +static int tpacpi_dprc_init(struct ibm_init_struct *iibm) +{ + int err; - /* if there was an error return it */ - if (wwanantenna_err && (wwanantenna_err != -ENODEV)) - return wwanantenna_err; - else if (!wwanantenna_err) - has_antennatype = true; + err = get_wwan_antenna(&wwan_antennatype); + if (err) + return err; - if (has_antennatype) { - err = sysfs_create_file(&tpacpi_pdev->dev.kobj, &dev_attr_wwan_antenna_type.attr); - if (err) - return err; - } + has_antennatype = true; return 0; } -static void dprc_exit(void) +static struct ibm_struct dprc_driver_data = { + .name = "dprc", +}; + +/* --------------------------------------------------------------------- */ + +static struct attribute *tpacpi_driver_attributes[] = { + &driver_attr_debug_level.attr, + &driver_attr_version.attr, + &driver_attr_interface_version.attr, +#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES + &driver_attr_wlsw_emulstate.attr, + &driver_attr_bluetooth_emulstate.attr, + &driver_attr_wwan_emulstate.attr, + &driver_attr_uwb_emulstate.attr, +#endif + NULL +}; + +#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES +static umode_t tpacpi_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) { - if (has_antennatype) - sysfs_remove_file(&tpacpi_pdev->dev.kobj, &dev_attr_wwan_antenna_type.attr); + if (attr == &driver_attr_wlsw_emulstate.attr) { + if (!dbg_wlswemul) + return 0; + } else if (attr == &driver_attr_bluetooth_emulstate.attr) { + if (!dbg_bluetoothemul) + return 0; + } else if (attr == &driver_attr_wwan_emulstate.attr) { + if (!dbg_wwanemul) + return 0; + } else if (attr == &driver_attr_uwb_emulstate.attr) { + if (!dbg_uwbemul) + return 0; + } + + return attr->mode; } +#endif -static struct ibm_struct dprc_driver_data = { - .name = "dprc", - .exit = dprc_exit, +static const struct attribute_group tpacpi_driver_attr_group = { +#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES + .is_visible = tpacpi_attr_is_visible, +#endif + .attrs = tpacpi_driver_attributes, +}; + +static const struct attribute_group *tpacpi_driver_groups[] = { + &tpacpi_driver_attr_group, + NULL, +}; + +static const struct attribute_group *tpacpi_groups[] = { + &adaptive_kbd_attr_group, + &hotkey_attr_group, + &bluetooth_attr_group, + &wan_attr_group, + &cmos_attr_group, + &proxsensor_attr_group, + &kbdlang_attr_group, + &dprc_attr_group, + NULL, +}; + +static const struct attribute_group *tpacpi_hwmon_groups[] = { + &thermal_attr_group, + &temp_label_attr_group, + &fan_attr_group, + NULL, +}; + +static const struct attribute_group *tpacpi_hwmon_driver_groups[] = { + &fan_driver_attr_group, + NULL, +}; + +/**************************************************************************** + **************************************************************************** + * + * Platform drivers + * + **************************************************************************** + ****************************************************************************/ + +static struct platform_driver tpacpi_pdriver = { + .driver = { + .name = TPACPI_DRVR_NAME, + .pm = &tpacpi_pm, + .groups = tpacpi_driver_groups, + .dev_groups = tpacpi_groups, + }, + .shutdown = tpacpi_shutdown_handler, +}; + +static struct platform_driver tpacpi_hwmon_pdriver = { + .driver = { + .name = TPACPI_HWMON_DRVR_NAME, + .groups = tpacpi_hwmon_driver_groups, + }, }; /**************************************************************************** @@ -10754,8 +10877,8 @@ static int __init ibm_init(struct ibm_init_struct *iibm) if (iibm->init) { ret = iibm->init(iibm); - if (ret > 0) - return 0; /* probe failed */ + if (ret > 0 || ret == -ENODEV) + return 0; /* subdriver functionality not available */ if (ret) return ret; @@ -11134,8 +11257,6 @@ static int __init set_ibm_param(const char *val, const struct kernel_param *kp) for (i = 0; i < ARRAY_SIZE(ibms_init); i++) { ibm = ibms_init[i].data; - WARN_ON(ibm == NULL); - if (!ibm || !ibm->name) continue; @@ -11247,6 +11368,13 @@ static void thinkpad_acpi_module_exit(void) tpacpi_lifecycle = TPACPI_LIFE_EXITING; + if (tpacpi_hwmon) + hwmon_device_unregister(tpacpi_hwmon); + if (tp_features.sensors_pdrv_registered) + platform_driver_unregister(&tpacpi_hwmon_pdriver); + if (tp_features.platform_drv_registered) + platform_driver_unregister(&tpacpi_pdriver); + list_for_each_entry_safe_reverse(ibm, itmp, &tpacpi_all_drivers, all_drivers) { @@ -11263,28 +11391,12 @@ static void thinkpad_acpi_module_exit(void) kfree(hotkey_keycode_map); } - if (tpacpi_hwmon) - hwmon_device_unregister(tpacpi_hwmon); - if (tpacpi_sensors_pdev) platform_device_unregister(tpacpi_sensors_pdev); if (tpacpi_pdev) platform_device_unregister(tpacpi_pdev); - - if (tp_features.sensors_pdrv_attrs_registered) - tpacpi_remove_driver_attributes(&tpacpi_hwmon_pdriver.driver); - if (tp_features.platform_drv_attrs_registered) - tpacpi_remove_driver_attributes(&tpacpi_pdriver.driver); - - if (tp_features.sensors_pdrv_registered) - platform_driver_unregister(&tpacpi_hwmon_pdriver); - - if (tp_features.platform_drv_registered) - platform_driver_unregister(&tpacpi_pdriver); - if (proc_dir) remove_proc_entry(TPACPI_PROC_DIR, acpi_root_dir); - if (tpacpi_wq) destroy_workqueue(tpacpi_wq); @@ -11336,36 +11448,6 @@ static int __init thinkpad_acpi_module_init(void) return -ENODEV; } - ret = platform_driver_register(&tpacpi_pdriver); - if (ret) { - pr_err("unable to register main platform driver\n"); - thinkpad_acpi_module_exit(); - return ret; - } - tp_features.platform_drv_registered = 1; - - ret = platform_driver_register(&tpacpi_hwmon_pdriver); - if (ret) { - pr_err("unable to register hwmon platform driver\n"); - thinkpad_acpi_module_exit(); - return ret; - } - tp_features.sensors_pdrv_registered = 1; - - ret = tpacpi_create_driver_attributes(&tpacpi_pdriver.driver); - if (!ret) { - tp_features.platform_drv_attrs_registered = 1; - ret = tpacpi_create_driver_attributes( - &tpacpi_hwmon_pdriver.driver); - } - if (ret) { - pr_err("unable to create sysfs driver attributes\n"); - thinkpad_acpi_module_exit(); - return ret; - } - tp_features.sensors_pdrv_attrs_registered = 1; - - /* Device initialization */ tpacpi_pdev = platform_device_register_simple(TPACPI_DRVR_NAME, -1, NULL, 0); @@ -11386,17 +11468,7 @@ static int __init thinkpad_acpi_module_init(void) thinkpad_acpi_module_exit(); return ret; } - tp_features.sensors_pdev_attrs_registered = 1; - tpacpi_hwmon = hwmon_device_register_with_groups( - &tpacpi_sensors_pdev->dev, TPACPI_NAME, NULL, NULL); - if (IS_ERR(tpacpi_hwmon)) { - ret = PTR_ERR(tpacpi_hwmon); - tpacpi_hwmon = NULL; - pr_err("unable to register hwmon device\n"); - thinkpad_acpi_module_exit(); - return ret; - } mutex_init(&tpacpi_inputdev_send_mutex); tpacpi_inputdev = input_allocate_device(); if (!tpacpi_inputdev) { @@ -11429,6 +11501,32 @@ static int __init thinkpad_acpi_module_init(void) tpacpi_lifecycle = TPACPI_LIFE_RUNNING; + ret = platform_driver_register(&tpacpi_pdriver); + if (ret) { + pr_err("unable to register main platform driver\n"); + thinkpad_acpi_module_exit(); + return ret; + } + tp_features.platform_drv_registered = 1; + + ret = platform_driver_register(&tpacpi_hwmon_pdriver); + if (ret) { + pr_err("unable to register hwmon platform driver\n"); + thinkpad_acpi_module_exit(); + return ret; + } + tp_features.sensors_pdrv_registered = 1; + + tpacpi_hwmon = hwmon_device_register_with_groups( + &tpacpi_sensors_pdev->dev, TPACPI_NAME, NULL, tpacpi_hwmon_groups); + if (IS_ERR(tpacpi_hwmon)) { + ret = PTR_ERR(tpacpi_hwmon); + tpacpi_hwmon = NULL; + pr_err("unable to register hwmon device\n"); + thinkpad_acpi_module_exit(); + return ret; + } + ret = input_register_device(tpacpi_inputdev); if (ret < 0) { pr_err("unable to register input device\n"); diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 17dd54d4b783..494f23052678 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -107,6 +107,9 @@ static const struct property_entry chuwi_hi10_plus_props[] = { PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10plus.fw"), PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), + PROPERTY_ENTRY_BOOL("silead,pen-supported"), + PROPERTY_ENTRY_U32("silead,pen-resolution-x", 8), + PROPERTY_ENTRY_U32("silead,pen-resolution-y", 8), { } }; @@ -124,15 +127,21 @@ static const struct ts_dmi_data chuwi_hi10_plus_data = { .properties = chuwi_hi10_plus_props, }; +static const u32 chuwi_hi10_pro_efi_min_max[] = { 8, 1911, 8, 1271 }; + static const struct property_entry chuwi_hi10_pro_props[] = { - PROPERTY_ENTRY_U32("touchscreen-min-x", 8), - PROPERTY_ENTRY_U32("touchscreen-min-y", 8), - PROPERTY_ENTRY_U32("touchscreen-size-x", 1912), - PROPERTY_ENTRY_U32("touchscreen-size-y", 1272), + PROPERTY_ENTRY_U32("touchscreen-min-x", 80), + PROPERTY_ENTRY_U32("touchscreen-min-y", 26), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1962), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1254), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10-pro.fw"), + PROPERTY_ENTRY_U32_ARRAY("silead,efi-fw-min-max", chuwi_hi10_pro_efi_min_max), PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), + PROPERTY_ENTRY_BOOL("silead,pen-supported"), + PROPERTY_ENTRY_U32("silead,pen-resolution-x", 8), + PROPERTY_ENTRY_U32("silead,pen-resolution-y", 8), { } }; @@ -352,18 +361,6 @@ static const struct ts_dmi_data gdix1001_01_upside_down_data = { .properties = gdix1001_upside_down_props, }; -static const struct property_entry glavey_tm800a550l_props[] = { - PROPERTY_ENTRY_STRING("firmware-name", "gt912-glavey-tm800a550l.fw"), - PROPERTY_ENTRY_STRING("goodix,config-name", "gt912-glavey-tm800a550l.cfg"), - PROPERTY_ENTRY_U32("goodix,main-clk", 54), - { } -}; - -static const struct ts_dmi_data glavey_tm800a550l_data = { - .acpi_name = "GDIX1001:00", - .properties = glavey_tm800a550l_props, -}; - static const struct property_entry gp_electronic_t701_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 960), PROPERTY_ENTRY_U32("touchscreen-size-y", 640), @@ -1140,15 +1137,6 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"), }, }, - { /* Glavey TM800A550L */ - .driver_data = (void *)&glavey_tm800a550l_data, - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), - DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), - /* Above strings are too generic, also match on BIOS version */ - DMI_MATCH(DMI_BIOS_VERSION, "ZY-8-BI-PX4S70VTR400-X423B-005-D"), - }, - }, { /* GP-electronic T701 */ .driver_data = (void *)&gp_electronic_t701_data, diff --git a/drivers/platform/x86/uv_sysfs.c b/drivers/platform/x86/uv_sysfs.c index 956a354b57c1..625b0b79d185 100644 --- a/drivers/platform/x86/uv_sysfs.c +++ b/drivers/platform/x86/uv_sysfs.c @@ -175,6 +175,7 @@ static struct attribute *uv_hub_attrs[] = { &cnode_attribute.attr, NULL, }; +ATTRIBUTE_GROUPS(uv_hub); static void hub_release(struct kobject *kobj) { @@ -205,7 +206,7 @@ static const struct sysfs_ops hub_sysfs_ops = { static struct kobj_type hub_attr_type = { .release = hub_release, .sysfs_ops = &hub_sysfs_ops, - .default_attrs = uv_hub_attrs, + .default_groups = uv_hub_groups, }; static int uv_hubs_init(void) @@ -327,6 +328,7 @@ static struct attribute *uv_port_attrs[] = { &uv_port_conn_port_attribute.attr, NULL, }; +ATTRIBUTE_GROUPS(uv_port); static void uv_port_release(struct kobject *kobj) { @@ -357,7 +359,7 @@ static const struct sysfs_ops uv_port_sysfs_ops = { static struct kobj_type uv_port_attr_type = { .release = uv_port_release, .sysfs_ops = &uv_port_sysfs_ops, - .default_attrs = uv_port_attrs, + .default_groups = uv_port_groups, }; static int uv_ports_init(void) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index c34341f4da76..58a23a9adbef 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -57,6 +57,11 @@ static_assert(sizeof(typeof_member(struct guid_block, guid)) == 16); static_assert(sizeof(struct guid_block) == 20); static_assert(__alignof__(struct guid_block) == 1); +enum { /* wmi_block flags */ + WMI_READ_TAKES_NO_ARGS, + WMI_PROBED, +}; + struct wmi_block { struct wmi_device dev; struct list_head list; @@ -67,8 +72,7 @@ struct wmi_block { wmi_notify_handler handler; void *handler_data; u64 req_buf_size; - - bool read_takes_no_args; + unsigned long flags; }; @@ -367,7 +371,7 @@ static acpi_status __query_block(struct wmi_block *wblock, u8 instance, wq_params[0].type = ACPI_TYPE_INTEGER; wq_params[0].integer.value = instance; - if (instance == 0 && wblock->read_takes_no_args) + if (instance == 0 && test_bit(WMI_READ_TAKES_NO_ARGS, &wblock->flags)) input.count = 0; /* @@ -1005,6 +1009,7 @@ static int wmi_dev_probe(struct device *dev) } } + set_bit(WMI_PROBED, &wblock->flags); return 0; probe_misc_failure: @@ -1022,6 +1027,8 @@ static void wmi_dev_remove(struct device *dev) struct wmi_block *wblock = dev_to_wblock(dev); struct wmi_driver *wdriver = drv_to_wdrv(dev->driver); + clear_bit(WMI_PROBED, &wblock->flags); + if (wdriver->filter_callback) { misc_deregister(&wblock->char_dev); kfree(wblock->char_dev.name); @@ -1113,7 +1120,7 @@ static int wmi_create_device(struct device *wmi_bus_dev, * laptops, WQxx may not be a method at all.) */ if (info->type != ACPI_TYPE_METHOD || info->param_count == 0) - wblock->read_takes_no_args = true; + set_bit(WMI_READ_TAKES_NO_ARGS, &wblock->flags); kfree(info); @@ -1319,15 +1326,17 @@ static void acpi_wmi_notify_handler(acpi_handle handle, u32 event, return; /* If a driver is bound, then notify the driver. */ - if (wblock->dev.dev.driver) { + if (test_bit(WMI_PROBED, &wblock->flags) && wblock->dev.dev.driver) { struct wmi_driver *driver = drv_to_wdrv(wblock->dev.dev.driver); struct acpi_buffer evdata = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_status status; - status = get_event_data(wblock, &evdata); - if (ACPI_FAILURE(status)) { - dev_warn(&wblock->dev.dev, "failed to get event data\n"); - return; + if (!driver->no_notify_data) { + status = get_event_data(wblock, &evdata); + if (ACPI_FAILURE(status)) { + dev_warn(&wblock->dev.dev, "failed to get event data\n"); + return; + } } if (driver->notify) diff --git a/drivers/platform/x86/x86-android-tablets.c b/drivers/platform/x86/x86-android-tablets.c new file mode 100644 index 000000000000..3ba63ad91b28 --- /dev/null +++ b/drivers/platform/x86/x86-android-tablets.c @@ -0,0 +1,870 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * DMI based code to deal with broken DSDTs on X86 tablets which ship with + * Android as (part of) the factory image. The factory kernels shipped on these + * devices typically have a bunch of things hardcoded, rather than specified + * in their DSDT. + * + * Copyright (C) 2021 Hans de Goede <hdegoede@redhat.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/acpi.h> +#include <linux/dmi.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/machine.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/power/bq24190_charger.h> +#include <linux/serdev.h> +#include <linux/string.h> +/* For gpio_get_desc() which is EXPORT_SYMBOL_GPL() */ +#include "../../gpio/gpiolib.h" + +/* + * Helper code to get Linux IRQ numbers given a description of the IRQ source + * (either IOAPIC index, or GPIO chip name + pin-number). + */ +enum x86_acpi_irq_type { + X86_ACPI_IRQ_TYPE_NONE, + X86_ACPI_IRQ_TYPE_APIC, + X86_ACPI_IRQ_TYPE_GPIOINT, + X86_ACPI_IRQ_TYPE_PMIC, +}; + +struct x86_acpi_irq_data { + char *chip; /* GPIO chip label (GPIOINT) or PMIC ACPI path (PMIC) */ + enum x86_acpi_irq_type type; + enum irq_domain_bus_token domain; + int index; + int trigger; /* ACPI_EDGE_SENSITIVE / ACPI_LEVEL_SENSITIVE */ + int polarity; /* ACPI_ACTIVE_HIGH / ACPI_ACTIVE_LOW / ACPI_ACTIVE_BOTH */ +}; + +static int x86_acpi_irq_helper_gpiochip_find(struct gpio_chip *gc, void *data) +{ + return gc->label && !strcmp(gc->label, data); +} + +static int x86_acpi_irq_helper_get(const struct x86_acpi_irq_data *data) +{ + struct irq_fwspec fwspec = { }; + struct irq_domain *domain; + struct acpi_device *adev; + struct gpio_desc *gpiod; + struct gpio_chip *chip; + unsigned int irq_type; + acpi_handle handle; + acpi_status status; + int irq, ret; + + switch (data->type) { + case X86_ACPI_IRQ_TYPE_APIC: + irq = acpi_register_gsi(NULL, data->index, data->trigger, data->polarity); + if (irq < 0) + pr_err("error %d getting APIC IRQ %d\n", irq, data->index); + + return irq; + case X86_ACPI_IRQ_TYPE_GPIOINT: + /* Like acpi_dev_gpio_irq_get(), but without parsing ACPI resources */ + chip = gpiochip_find(data->chip, x86_acpi_irq_helper_gpiochip_find); + if (!chip) { + pr_err("error cannot find GPIO chip %s\n", data->chip); + return -ENODEV; + } + + gpiod = gpiochip_get_desc(chip, data->index); + if (IS_ERR(gpiod)) { + ret = PTR_ERR(gpiod); + pr_err("error %d getting GPIO %s %d\n", ret, data->chip, data->index); + return ret; + } + + irq = gpiod_to_irq(gpiod); + if (irq < 0) { + pr_err("error %d getting IRQ %s %d\n", irq, data->chip, data->index); + return irq; + } + + irq_type = acpi_dev_get_irq_type(data->trigger, data->polarity); + if (irq_type != IRQ_TYPE_NONE && irq_type != irq_get_trigger_type(irq)) + irq_set_irq_type(irq, irq_type); + + return irq; + case X86_ACPI_IRQ_TYPE_PMIC: + status = acpi_get_handle(NULL, data->chip, &handle); + if (ACPI_FAILURE(status)) { + pr_err("error could not get %s handle\n", data->chip); + return -ENODEV; + } + + acpi_bus_get_device(handle, &adev); + if (!adev) { + pr_err("error could not get %s adev\n", data->chip); + return -ENODEV; + } + + fwspec.fwnode = acpi_fwnode_handle(adev); + domain = irq_find_matching_fwspec(&fwspec, data->domain); + if (!domain) { + pr_err("error could not find IRQ domain for %s\n", data->chip); + return -ENODEV; + } + + return irq_create_mapping(domain, data->index); + default: + return 0; + } +} + +struct x86_i2c_client_info { + struct i2c_board_info board_info; + char *adapter_path; + struct x86_acpi_irq_data irq_data; +}; + +struct x86_serdev_info { + const char *ctrl_hid; + const char *ctrl_uid; + const char *ctrl_devname; + /* + * ATM the serdev core only supports of or ACPI matching; and sofar all + * Android x86 tablets DSDTs have usable serdev nodes, but sometimes + * under the wrong controller. So we just tie the existing serdev ACPI + * node to the right controller. + */ + const char *serdev_hid; +}; + +struct x86_dev_info { + const char * const *modules; + struct gpiod_lookup_table **gpiod_lookup_tables; + const struct x86_i2c_client_info *i2c_client_info; + const struct platform_device_info *pdev_info; + const struct x86_serdev_info *serdev_info; + int i2c_client_count; + int pdev_count; + int serdev_count; +}; + +/* Generic / shared bq24190 settings */ +static const char * const bq24190_suppliers[] = { "tusb1210-psy" }; + +static const struct property_entry bq24190_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers), + PROPERTY_ENTRY_BOOL("omit-battery-class"), + PROPERTY_ENTRY_BOOL("disable-reset"), + { } +}; + +static const struct software_node bq24190_node = { + .properties = bq24190_props, +}; + +/* For enableing the bq24190 5V boost based on id-pin */ +static struct regulator_consumer_supply intel_int3496_consumer = { + .supply = "vbus", + .dev_name = "intel-int3496", +}; + +static const struct regulator_init_data bq24190_vbus_init_data = { + .constraints = { + .name = "bq24190_vbus", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &intel_int3496_consumer, + .num_consumer_supplies = 1, +}; + +static struct bq24190_platform_data bq24190_pdata = { + .regulator_init_data = &bq24190_vbus_init_data, +}; + +static const char * const bq24190_modules[] __initconst = { + "crystal_cove_charger", /* For the bq24190 IRQ */ + "bq24190_charger", /* For the Vbus regulator for intel-int3496 */ + NULL +}; + +/* Generic pdevs array and gpio-lookups for micro USB ID pin handling */ +static const struct platform_device_info int3496_pdevs[] __initconst = { + { + /* For micro USB ID pin handling */ + .name = "intel-int3496", + .id = PLATFORM_DEVID_NONE, + }, +}; + +static struct gpiod_lookup_table int3496_gpo2_pin22_gpios = { + .dev_id = "intel-int3496", + .table = { + GPIO_LOOKUP("INT33FC:02", 22, "id", GPIO_ACTIVE_HIGH), + { } + }, +}; + +/* Asus ME176C tablets have an Android factory img with everything hardcoded */ +static const char * const asus_me176c_accel_mount_matrix[] = { + "-1", "0", "0", + "0", "1", "0", + "0", "0", "1" +}; + +static const struct property_entry asus_me176c_accel_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", asus_me176c_accel_mount_matrix), + { } +}; + +static const struct software_node asus_me176c_accel_node = { + .properties = asus_me176c_accel_props, +}; + +static const struct x86_i2c_client_info asus_me176c_i2c_clients[] __initconst = { + { + /* bq24190 battery charger */ + .board_info = { + .type = "bq24190", + .addr = 0x6b, + .dev_name = "bq24190", + .swnode = &bq24190_node, + .platform_data = &bq24190_pdata, + }, + .adapter_path = "\\_SB_.I2C1", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_PMIC, + .chip = "\\_SB_.I2C7.PMIC", + .domain = DOMAIN_BUS_WAKEUP, + .index = 0, + }, + }, { + /* ug3105 battery monitor */ + .board_info = { + .type = "ug3105", + .addr = 0x70, + .dev_name = "ug3105", + }, + .adapter_path = "\\_SB_.I2C1", + }, { + /* ak09911 compass */ + .board_info = { + .type = "ak09911", + .addr = 0x0c, + .dev_name = "ak09911", + }, + .adapter_path = "\\_SB_.I2C5", + }, { + /* kxtj21009 accel */ + .board_info = { + .type = "kxtj21009", + .addr = 0x0f, + .dev_name = "kxtj21009", + .swnode = &asus_me176c_accel_node, + }, + .adapter_path = "\\_SB_.I2C5", + }, { + /* goodix touchscreen */ + .board_info = { + .type = "GDIX1001:00", + .addr = 0x14, + .dev_name = "goodix_ts", + }, + .adapter_path = "\\_SB_.I2C6", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_APIC, + .index = 0x45, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, +}; + +static const struct x86_serdev_info asus_me176c_serdevs[] __initconst = { + { + .ctrl_hid = "80860F0A", + .ctrl_uid = "2", + .ctrl_devname = "serial0", + .serdev_hid = "BCM2E3A", + }, +}; + +static struct gpiod_lookup_table asus_me176c_goodix_gpios = { + .dev_id = "i2c-goodix_ts", + .table = { + GPIO_LOOKUP("INT33FC:00", 60, "reset", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 28, "irq", GPIO_ACTIVE_HIGH), + { } + }, +}; + +static struct gpiod_lookup_table *asus_me176c_gpios[] = { + &int3496_gpo2_pin22_gpios, + &asus_me176c_goodix_gpios, + NULL +}; + +static const struct x86_dev_info asus_me176c_info __initconst = { + .i2c_client_info = asus_me176c_i2c_clients, + .i2c_client_count = ARRAY_SIZE(asus_me176c_i2c_clients), + .pdev_info = int3496_pdevs, + .pdev_count = ARRAY_SIZE(int3496_pdevs), + .serdev_info = asus_me176c_serdevs, + .serdev_count = ARRAY_SIZE(asus_me176c_serdevs), + .gpiod_lookup_tables = asus_me176c_gpios, + .modules = bq24190_modules, +}; + +/* Asus TF103C tablets have an Android factory img with everything hardcoded */ +static const char * const asus_tf103c_accel_mount_matrix[] = { + "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1" +}; + +static const struct property_entry asus_tf103c_accel_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", asus_tf103c_accel_mount_matrix), + { } +}; + +static const struct software_node asus_tf103c_accel_node = { + .properties = asus_tf103c_accel_props, +}; + +static const struct property_entry asus_tf103c_touchscreen_props[] = { + PROPERTY_ENTRY_STRING("compatible", "atmel,atmel_mxt_ts"), + { } +}; + +static const struct software_node asus_tf103c_touchscreen_node = { + .properties = asus_tf103c_touchscreen_props, +}; + +static const struct x86_i2c_client_info asus_tf103c_i2c_clients[] __initconst = { + { + /* bq24190 battery charger */ + .board_info = { + .type = "bq24190", + .addr = 0x6b, + .dev_name = "bq24190", + .swnode = &bq24190_node, + .platform_data = &bq24190_pdata, + }, + .adapter_path = "\\_SB_.I2C1", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_PMIC, + .chip = "\\_SB_.I2C7.PMIC", + .domain = DOMAIN_BUS_WAKEUP, + .index = 0, + }, + }, { + /* ug3105 battery monitor */ + .board_info = { + .type = "ug3105", + .addr = 0x70, + .dev_name = "ug3105", + }, + .adapter_path = "\\_SB_.I2C1", + }, { + /* ak09911 compass */ + .board_info = { + .type = "ak09911", + .addr = 0x0c, + .dev_name = "ak09911", + }, + .adapter_path = "\\_SB_.I2C5", + }, { + /* kxtj21009 accel */ + .board_info = { + .type = "kxtj21009", + .addr = 0x0f, + .dev_name = "kxtj21009", + .swnode = &asus_tf103c_accel_node, + }, + .adapter_path = "\\_SB_.I2C5", + }, { + /* atmel touchscreen */ + .board_info = { + .type = "atmel_mxt_ts", + .addr = 0x4a, + .dev_name = "atmel_mxt_ts", + .swnode = &asus_tf103c_touchscreen_node, + }, + .adapter_path = "\\_SB_.I2C6", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FC:02", + .index = 28, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, +}; + +static struct gpiod_lookup_table *asus_tf103c_gpios[] = { + &int3496_gpo2_pin22_gpios, + NULL +}; + +static const struct x86_dev_info asus_tf103c_info __initconst = { + .i2c_client_info = asus_tf103c_i2c_clients, + .i2c_client_count = ARRAY_SIZE(asus_tf103c_i2c_clients), + .pdev_info = int3496_pdevs, + .pdev_count = ARRAY_SIZE(int3496_pdevs), + .gpiod_lookup_tables = asus_tf103c_gpios, + .modules = bq24190_modules, +}; + +/* + * When booted with the BIOS set to Android mode the Chuwi Hi8 (CWI509) DSDT + * contains a whole bunch of bogus ACPI I2C devices and is missing entries + * for the touchscreen and the accelerometer. + */ +static const struct property_entry chuwi_hi8_gsl1680_props[] = { + PROPERTY_ENTRY_U32("touchscreen-size-x", 1665), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1140), + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), + PROPERTY_ENTRY_BOOL("silead,home-button"), + PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi8.fw"), + { } +}; + +static const struct software_node chuwi_hi8_gsl1680_node = { + .properties = chuwi_hi8_gsl1680_props, +}; + +static const char * const chuwi_hi8_mount_matrix[] = { + "1", "0", "0", + "0", "-1", "0", + "0", "0", "1" +}; + +static const struct property_entry chuwi_hi8_bma250e_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", chuwi_hi8_mount_matrix), + { } +}; + +static const struct software_node chuwi_hi8_bma250e_node = { + .properties = chuwi_hi8_bma250e_props, +}; + +static const struct x86_i2c_client_info chuwi_hi8_i2c_clients[] __initconst = { + { + /* Silead touchscreen */ + .board_info = { + .type = "gsl1680", + .addr = 0x40, + .swnode = &chuwi_hi8_gsl1680_node, + }, + .adapter_path = "\\_SB_.I2C4", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_APIC, + .index = 0x44, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_HIGH, + }, + }, { + /* BMA250E accelerometer */ + .board_info = { + .type = "bma250e", + .addr = 0x18, + .swnode = &chuwi_hi8_bma250e_node, + }, + .adapter_path = "\\_SB_.I2C3", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FC:02", + .index = 23, + .trigger = ACPI_LEVEL_SENSITIVE, + .polarity = ACPI_ACTIVE_HIGH, + }, + }, +}; + +static const struct x86_dev_info chuwi_hi8_info __initconst = { + .i2c_client_info = chuwi_hi8_i2c_clients, + .i2c_client_count = ARRAY_SIZE(chuwi_hi8_i2c_clients), +}; + +/* + * Whitelabel (sold as various brands) TM800A550L tablets. + * These tablet's DSDT contains a whole bunch of bogus ACPI I2C devices + * (removed through acpi_quirk_skip_i2c_client_enumeration()) and + * the touchscreen fwnode has the wrong GPIOs. + */ +static const char * const whitelabel_tm800a550l_accel_mount_matrix[] = { + "-1", "0", "0", + "0", "1", "0", + "0", "0", "1" +}; + +static const struct property_entry whitelabel_tm800a550l_accel_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", whitelabel_tm800a550l_accel_mount_matrix), + { } +}; + +static const struct software_node whitelabel_tm800a550l_accel_node = { + .properties = whitelabel_tm800a550l_accel_props, +}; + +static const struct property_entry whitelabel_tm800a550l_goodix_props[] = { + PROPERTY_ENTRY_STRING("firmware-name", "gt912-tm800a550l.fw"), + PROPERTY_ENTRY_STRING("goodix,config-name", "gt912-tm800a550l.cfg"), + PROPERTY_ENTRY_U32("goodix,main-clk", 54), + { } +}; + +static const struct software_node whitelabel_tm800a550l_goodix_node = { + .properties = whitelabel_tm800a550l_goodix_props, +}; + +static const struct x86_i2c_client_info whitelabel_tm800a550l_i2c_clients[] __initconst = { + { + /* goodix touchscreen */ + .board_info = { + .type = "GDIX1001:00", + .addr = 0x14, + .dev_name = "goodix_ts", + .swnode = &whitelabel_tm800a550l_goodix_node, + }, + .adapter_path = "\\_SB_.I2C2", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_APIC, + .index = 0x44, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_HIGH, + }, + }, { + /* kxcj91008 accel */ + .board_info = { + .type = "kxcj91008", + .addr = 0x0f, + .dev_name = "kxcj91008", + .swnode = &whitelabel_tm800a550l_accel_node, + }, + .adapter_path = "\\_SB_.I2C3", + }, +}; + +static struct gpiod_lookup_table whitelabel_tm800a550l_goodix_gpios = { + .dev_id = "i2c-goodix_ts", + .table = { + GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 3, "irq", GPIO_ACTIVE_HIGH), + { } + }, +}; + +static struct gpiod_lookup_table *whitelabel_tm800a550l_gpios[] = { + &whitelabel_tm800a550l_goodix_gpios, + NULL +}; + +static const struct x86_dev_info whitelabel_tm800a550l_info __initconst = { + .i2c_client_info = whitelabel_tm800a550l_i2c_clients, + .i2c_client_count = ARRAY_SIZE(whitelabel_tm800a550l_i2c_clients), + .gpiod_lookup_tables = whitelabel_tm800a550l_gpios, +}; + +/* + * If the EFI bootloader is not Xiaomi's own signed Android loader, then the + * Xiaomi Mi Pad 2 X86 tablet sets OSID in the DSDT to 1 (Windows), causing + * a bunch of devices to be hidden. + * + * This takes care of instantiating the hidden devices manually. + */ +static const char * const bq27520_suppliers[] = { "bq25890-charger" }; + +static const struct property_entry bq27520_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq27520_suppliers), + { } +}; + +static const struct software_node bq27520_node = { + .properties = bq27520_props, +}; + +static const struct x86_i2c_client_info xiaomi_mipad2_i2c_clients[] __initconst = { + { + /* BQ27520 fuel-gauge */ + .board_info = { + .type = "bq27520", + .addr = 0x55, + .dev_name = "bq27520", + .swnode = &bq27520_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C1", + }, { + /* KTD2026 RGB notification LED controller */ + .board_info = { + .type = "ktd2026", + .addr = 0x30, + .dev_name = "ktd2026", + }, + .adapter_path = "\\_SB_.PCI0.I2C3", + }, +}; + +static const struct x86_dev_info xiaomi_mipad2_info __initconst = { + .i2c_client_info = xiaomi_mipad2_i2c_clients, + .i2c_client_count = ARRAY_SIZE(xiaomi_mipad2_i2c_clients), +}; + +static const struct dmi_system_id x86_android_tablet_ids[] __initconst = { + { + /* Asus MeMO Pad 7 ME176C */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ME176C"), + }, + .driver_data = (void *)&asus_me176c_info, + }, + { + /* Asus TF103C */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"), + }, + .driver_data = (void *)&asus_tf103c_info, + }, + { + /* Chuwi Hi8 (CWI509) */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), + DMI_MATCH(DMI_BOARD_NAME, "BYT-PA03C"), + DMI_MATCH(DMI_SYS_VENDOR, "ilife"), + DMI_MATCH(DMI_PRODUCT_NAME, "S806"), + }, + .driver_data = (void *)&chuwi_hi8_info, + }, + { + /* Whitelabel (sold as various brands) TM800A550L */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are too generic, also match on BIOS version */ + DMI_MATCH(DMI_BIOS_VERSION, "ZY-8-BI-PX4S70VTR400-X423B-005-D"), + }, + .driver_data = (void *)&whitelabel_tm800a550l_info, + }, + { + /* Xiaomi Mi Pad 2 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"), + DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"), + }, + .driver_data = (void *)&xiaomi_mipad2_info, + }, + { } +}; +MODULE_DEVICE_TABLE(dmi, x86_android_tablet_ids); + +static int i2c_client_count; +static int pdev_count; +static int serdev_count; +static struct i2c_client **i2c_clients; +static struct platform_device **pdevs; +static struct serdev_device **serdevs; +static struct gpiod_lookup_table **gpiod_lookup_tables; + +static __init int x86_instantiate_i2c_client(const struct x86_dev_info *dev_info, + int idx) +{ + const struct x86_i2c_client_info *client_info = &dev_info->i2c_client_info[idx]; + struct i2c_board_info board_info = client_info->board_info; + struct i2c_adapter *adap; + acpi_handle handle; + acpi_status status; + + board_info.irq = x86_acpi_irq_helper_get(&client_info->irq_data); + if (board_info.irq < 0) + return board_info.irq; + + status = acpi_get_handle(NULL, client_info->adapter_path, &handle); + if (ACPI_FAILURE(status)) { + pr_err("Error could not get %s handle\n", client_info->adapter_path); + return -ENODEV; + } + + adap = i2c_acpi_find_adapter_by_handle(handle); + if (!adap) { + pr_err("error could not get %s adapter\n", client_info->adapter_path); + return -ENODEV; + } + + i2c_clients[idx] = i2c_new_client_device(adap, &board_info); + put_device(&adap->dev); + if (IS_ERR(i2c_clients[idx])) + return dev_err_probe(&adap->dev, PTR_ERR(i2c_clients[idx]), + "creating I2C-client %d\n", idx); + + return 0; +} + +static __init int x86_instantiate_serdev(const struct x86_serdev_info *info, int idx) +{ + struct acpi_device *ctrl_adev, *serdev_adev; + struct serdev_device *serdev; + struct device *ctrl_dev; + int ret = -ENODEV; + + ctrl_adev = acpi_dev_get_first_match_dev(info->ctrl_hid, info->ctrl_uid, -1); + if (!ctrl_adev) { + pr_err("error could not get %s/%s ctrl adev\n", + info->ctrl_hid, info->ctrl_uid); + return -ENODEV; + } + + serdev_adev = acpi_dev_get_first_match_dev(info->serdev_hid, NULL, -1); + if (!serdev_adev) { + pr_err("error could not get %s serdev adev\n", info->serdev_hid); + goto put_ctrl_adev; + } + + /* get_first_physical_node() returns a weak ref, no need to put() it */ + ctrl_dev = acpi_get_first_physical_node(ctrl_adev); + if (!ctrl_dev) { + pr_err("error could not get %s/%s ctrl physical dev\n", + info->ctrl_hid, info->ctrl_uid); + goto put_serdev_adev; + } + + /* ctrl_dev now points to the controller's parent, get the controller */ + ctrl_dev = device_find_child_by_name(ctrl_dev, info->ctrl_devname); + if (!ctrl_dev) { + pr_err("error could not get %s/%s %s ctrl dev\n", + info->ctrl_hid, info->ctrl_uid, info->ctrl_devname); + goto put_serdev_adev; + } + + serdev = serdev_device_alloc(to_serdev_controller(ctrl_dev)); + if (!serdev) { + ret = -ENOMEM; + goto put_serdev_adev; + } + + ACPI_COMPANION_SET(&serdev->dev, serdev_adev); + acpi_device_set_enumerated(serdev_adev); + + ret = serdev_device_add(serdev); + if (ret) { + dev_err(&serdev->dev, "error %d adding serdev\n", ret); + serdev_device_put(serdev); + goto put_serdev_adev; + } + + serdevs[idx] = serdev; + +put_serdev_adev: + acpi_dev_put(serdev_adev); +put_ctrl_adev: + acpi_dev_put(ctrl_adev); + return ret; +} + +static void x86_android_tablet_cleanup(void) +{ + int i; + + for (i = 0; i < serdev_count; i++) { + if (serdevs[i]) + serdev_device_remove(serdevs[i]); + } + + kfree(serdevs); + + for (i = 0; i < pdev_count; i++) + platform_device_unregister(pdevs[i]); + + kfree(pdevs); + + for (i = 0; i < i2c_client_count; i++) + i2c_unregister_device(i2c_clients[i]); + + kfree(i2c_clients); + + for (i = 0; gpiod_lookup_tables && gpiod_lookup_tables[i]; i++) + gpiod_remove_lookup_table(gpiod_lookup_tables[i]); +} + +static __init int x86_android_tablet_init(void) +{ + const struct x86_dev_info *dev_info; + const struct dmi_system_id *id; + int i, ret = 0; + + id = dmi_first_match(x86_android_tablet_ids); + if (!id) + return -ENODEV; + + dev_info = id->driver_data; + + /* + * Since this runs from module_init() it cannot use -EPROBE_DEFER, + * instead pre-load any modules which are listed as requirements. + */ + for (i = 0; dev_info->modules && dev_info->modules[i]; i++) + request_module(dev_info->modules[i]); + + gpiod_lookup_tables = dev_info->gpiod_lookup_tables; + for (i = 0; gpiod_lookup_tables && gpiod_lookup_tables[i]; i++) + gpiod_add_lookup_table(gpiod_lookup_tables[i]); + + i2c_clients = kcalloc(dev_info->i2c_client_count, sizeof(*i2c_clients), GFP_KERNEL); + if (!i2c_clients) { + x86_android_tablet_cleanup(); + return -ENOMEM; + } + + i2c_client_count = dev_info->i2c_client_count; + for (i = 0; i < i2c_client_count; i++) { + ret = x86_instantiate_i2c_client(dev_info, i); + if (ret < 0) { + x86_android_tablet_cleanup(); + return ret; + } + } + + pdevs = kcalloc(dev_info->pdev_count, sizeof(*pdevs), GFP_KERNEL); + if (!pdevs) { + x86_android_tablet_cleanup(); + return -ENOMEM; + } + + pdev_count = dev_info->pdev_count; + for (i = 0; i < pdev_count; i++) { + pdevs[i] = platform_device_register_full(&dev_info->pdev_info[i]); + if (IS_ERR(pdevs[i])) { + x86_android_tablet_cleanup(); + return PTR_ERR(pdevs[i]); + } + } + + serdevs = kcalloc(dev_info->serdev_count, sizeof(*serdevs), GFP_KERNEL); + if (!serdevs) { + x86_android_tablet_cleanup(); + return -ENOMEM; + } + + serdev_count = dev_info->serdev_count; + for (i = 0; i < serdev_count; i++) { + ret = x86_instantiate_serdev(&dev_info->serdev_info[i], i); + if (ret < 0) { + x86_android_tablet_cleanup(); + return ret; + } + } + + return 0; +} + +module_init(x86_android_tablet_init); +module_exit(x86_android_tablet_cleanup); + +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com"); +MODULE_DESCRIPTION("X86 Android tablets DSDT fixups driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c index 6ac88fbee3cb..c0dfcfa33206 100644 --- a/drivers/power/supply/power_supply_sysfs.c +++ b/drivers/power/supply/power_supply_sysfs.c @@ -134,6 +134,12 @@ static const char * const POWER_SUPPLY_SCOPE_TEXT[] = { [POWER_SUPPLY_SCOPE_DEVICE] = "Device", }; +static const char * const POWER_SUPPLY_CHARGE_BEHAVIOUR_TEXT[] = { + [POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO] = "auto", + [POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE] = "inhibit-charge", + [POWER_SUPPLY_CHARGE_BEHAVIOUR_FORCE_DISCHARGE] = "force-discharge", +}; + static struct power_supply_attr power_supply_attrs[] = { /* Properties of type `int' */ POWER_SUPPLY_ENUM_ATTR(STATUS), @@ -173,6 +179,7 @@ static struct power_supply_attr power_supply_attrs[] = { POWER_SUPPLY_ATTR(CHARGE_CONTROL_LIMIT_MAX), POWER_SUPPLY_ATTR(CHARGE_CONTROL_START_THRESHOLD), POWER_SUPPLY_ATTR(CHARGE_CONTROL_END_THRESHOLD), + POWER_SUPPLY_ENUM_ATTR(CHARGE_BEHAVIOUR), POWER_SUPPLY_ATTR(INPUT_CURRENT_LIMIT), POWER_SUPPLY_ATTR(INPUT_VOLTAGE_LIMIT), POWER_SUPPLY_ATTR(INPUT_POWER_LIMIT), @@ -485,3 +492,52 @@ out: return ret; } + +ssize_t power_supply_charge_behaviour_show(struct device *dev, + unsigned int available_behaviours, + enum power_supply_charge_behaviour current_behaviour, + char *buf) +{ + bool match = false, available, active; + ssize_t count = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(POWER_SUPPLY_CHARGE_BEHAVIOUR_TEXT); i++) { + available = available_behaviours & BIT(i); + active = i == current_behaviour; + + if (available && active) { + count += sysfs_emit_at(buf, count, "[%s] ", + POWER_SUPPLY_CHARGE_BEHAVIOUR_TEXT[i]); + match = true; + } else if (available) { + count += sysfs_emit_at(buf, count, "%s ", + POWER_SUPPLY_CHARGE_BEHAVIOUR_TEXT[i]); + } + } + + if (!match) { + dev_warn(dev, "driver reporting unsupported charge behaviour\n"); + return -EINVAL; + } + + if (count) + buf[count - 1] = '\n'; + + return count; +} +EXPORT_SYMBOL_GPL(power_supply_charge_behaviour_show); + +int power_supply_charge_behaviour_parse(unsigned int available_behaviours, const char *buf) +{ + int i = sysfs_match_string(POWER_SUPPLY_CHARGE_BEHAVIOUR_TEXT, buf); + + if (i < 0) + return i; + + if (available_behaviours & BIT(i)) + return i; + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(power_supply_charge_behaviour_parse); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 9d222ba17ec6..1dc86eb1361a 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -1589,6 +1589,17 @@ config NIC7018_WDT To compile this driver as a module, choose M here: the module will be called nic7018_wdt. +config SIEMENS_SIMATIC_IPC_WDT + tristate "Siemens Simatic IPC Watchdog" + depends on SIEMENS_SIMATIC_IPC + select WATCHDOG_CORE + help + This driver adds support for several watchdogs found in Industrial + PCs from Siemens. + + To compile this driver as a module, choose M here: the module will be + called simatic-ipc-wdt. + # M68K Architecture config M54xx_WATCHDOG diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 2ee97064145b..31b931846e32 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -143,6 +143,7 @@ obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o obj-$(CONFIG_MLX_WDT) += mlx_wdt.o obj-$(CONFIG_KEEMBAY_WATCHDOG) += keembay_wdt.o +obj-$(CONFIG_SIEMENS_SIMATIC_IPC_WDT) += simatic-ipc-wdt.o # M68K Architecture obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o diff --git a/drivers/watchdog/simatic-ipc-wdt.c b/drivers/watchdog/simatic-ipc-wdt.c new file mode 100644 index 000000000000..8bac793c63fb --- /dev/null +++ b/drivers/watchdog/simatic-ipc-wdt.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Siemens SIMATIC IPC driver for Watchdogs + * + * Copyright (c) Siemens AG, 2020-2021 + * + * Authors: + * Gerd Haeussler <gerd.haeussler.ext@siemens.com> + */ + +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_data/x86/simatic-ipc-base.h> +#include <linux/platform_device.h> +#include <linux/sizes.h> +#include <linux/util_macros.h> +#include <linux/watchdog.h> + +#define WD_ENABLE_IOADR 0x62 +#define WD_TRIGGER_IOADR 0x66 +#define GPIO_COMMUNITY0_PORT_ID 0xaf +#define PAD_CFG_DW0_GPP_A_23 0x4b8 +#define SAFE_EN_N_427E 0x01 +#define SAFE_EN_N_227E 0x04 +#define WD_ENABLED 0x01 +#define WD_TRIGGERED 0x80 +#define WD_MACROMODE 0x02 + +#define TIMEOUT_MIN 2 +#define TIMEOUT_DEF 64 +#define TIMEOUT_MAX 64 + +#define GP_STATUS_REG_227E 0x404D /* IO PORT for SAFE_EN_N on 227E */ + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0000); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static struct resource gp_status_reg_227e_res = + DEFINE_RES_IO_NAMED(GP_STATUS_REG_227E, SZ_1, KBUILD_MODNAME); + +static struct resource io_resource_enable = + DEFINE_RES_IO_NAMED(WD_ENABLE_IOADR, SZ_1, + KBUILD_MODNAME " WD_ENABLE_IOADR"); + +static struct resource io_resource_trigger = + DEFINE_RES_IO_NAMED(WD_TRIGGER_IOADR, SZ_1, + KBUILD_MODNAME " WD_TRIGGER_IOADR"); + +/* the actual start will be discovered with pci, 0 is a placeholder */ +static struct resource mem_resource = + DEFINE_RES_MEM_NAMED(0, SZ_4, "WD_RESET_BASE_ADR"); + +static u32 wd_timeout_table[] = {2, 4, 6, 8, 16, 32, 48, 64 }; +static void __iomem *wd_reset_base_addr; + +static int wd_start(struct watchdog_device *wdd) +{ + outb(inb(WD_ENABLE_IOADR) | WD_ENABLED, WD_ENABLE_IOADR); + return 0; +} + +static int wd_stop(struct watchdog_device *wdd) +{ + outb(inb(WD_ENABLE_IOADR) & ~WD_ENABLED, WD_ENABLE_IOADR); + return 0; +} + +static int wd_ping(struct watchdog_device *wdd) +{ + inb(WD_TRIGGER_IOADR); + return 0; +} + +static int wd_set_timeout(struct watchdog_device *wdd, unsigned int t) +{ + int timeout_idx = find_closest(t, wd_timeout_table, + ARRAY_SIZE(wd_timeout_table)); + + outb((inb(WD_ENABLE_IOADR) & 0xc7) | timeout_idx << 3, WD_ENABLE_IOADR); + wdd->timeout = wd_timeout_table[timeout_idx]; + return 0; +} + +static const struct watchdog_info wdt_ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT, + .identity = KBUILD_MODNAME, +}; + +static const struct watchdog_ops wdt_ops = { + .owner = THIS_MODULE, + .start = wd_start, + .stop = wd_stop, + .ping = wd_ping, + .set_timeout = wd_set_timeout, +}; + +static void wd_secondary_enable(u32 wdtmode) +{ + u16 resetbit; + + /* set safe_en_n so we are not just WDIOF_ALARMONLY */ + if (wdtmode == SIMATIC_IPC_DEVICE_227E) { + /* enable SAFE_EN_N on GP_STATUS_REG_227E */ + resetbit = inb(GP_STATUS_REG_227E); + outb(resetbit & ~SAFE_EN_N_227E, GP_STATUS_REG_227E); + } else { + /* enable SAFE_EN_N on PCH D1600 */ + resetbit = ioread16(wd_reset_base_addr); + iowrite16(resetbit & ~SAFE_EN_N_427E, wd_reset_base_addr); + } +} + +static int wd_setup(u32 wdtmode) +{ + unsigned int bootstatus = 0; + int timeout_idx; + + timeout_idx = find_closest(TIMEOUT_DEF, wd_timeout_table, + ARRAY_SIZE(wd_timeout_table)); + + if (inb(WD_ENABLE_IOADR) & WD_TRIGGERED) + bootstatus |= WDIOF_CARDRESET; + + /* reset alarm bit, set macro mode, and set timeout */ + outb(WD_TRIGGERED | WD_MACROMODE | timeout_idx << 3, WD_ENABLE_IOADR); + + wd_secondary_enable(wdtmode); + + return bootstatus; +} + +static struct watchdog_device wdd_data = { + .info = &wdt_ident, + .ops = &wdt_ops, + .min_timeout = TIMEOUT_MIN, + .max_timeout = TIMEOUT_MAX +}; + +static int simatic_ipc_wdt_probe(struct platform_device *pdev) +{ + struct simatic_ipc_platform *plat = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct resource *res; + + switch (plat->devmode) { + case SIMATIC_IPC_DEVICE_227E: + if (!devm_request_region(dev, gp_status_reg_227e_res.start, + resource_size(&gp_status_reg_227e_res), + KBUILD_MODNAME)) { + dev_err(dev, + "Unable to register IO resource at %pR\n", + &gp_status_reg_227e_res); + return -EBUSY; + } + fallthrough; + case SIMATIC_IPC_DEVICE_427E: + wdd_data.parent = dev; + break; + default: + return -EINVAL; + } + + if (!devm_request_region(dev, io_resource_enable.start, + resource_size(&io_resource_enable), + io_resource_enable.name)) { + dev_err(dev, + "Unable to register IO resource at %#x\n", + WD_ENABLE_IOADR); + return -EBUSY; + } + + if (!devm_request_region(dev, io_resource_trigger.start, + resource_size(&io_resource_trigger), + io_resource_trigger.name)) { + dev_err(dev, + "Unable to register IO resource at %#x\n", + WD_TRIGGER_IOADR); + return -EBUSY; + } + + if (plat->devmode == SIMATIC_IPC_DEVICE_427E) { + res = &mem_resource; + + /* get GPIO base from PCI */ + res->start = simatic_ipc_get_membase0(PCI_DEVFN(0x1f, 1)); + if (res->start == 0) + return -ENODEV; + + /* do the final address calculation */ + res->start = res->start + (GPIO_COMMUNITY0_PORT_ID << 16) + + PAD_CFG_DW0_GPP_A_23; + res->end += res->start; + + wd_reset_base_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(wd_reset_base_addr)) + return PTR_ERR(wd_reset_base_addr); + } + + wdd_data.bootstatus = wd_setup(plat->devmode); + if (wdd_data.bootstatus) + dev_warn(dev, "last reboot caused by watchdog reset\n"); + + watchdog_set_nowayout(&wdd_data, nowayout); + watchdog_stop_on_reboot(&wdd_data); + return devm_watchdog_register_device(dev, &wdd_data); +} + +static struct platform_driver simatic_ipc_wdt_driver = { + .probe = simatic_ipc_wdt_probe, + .driver = { + .name = KBUILD_MODNAME, + }, +}; + +module_platform_driver(simatic_ipc_wdt_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" KBUILD_MODNAME); +MODULE_AUTHOR("Gerd Haeussler <gerd.haeussler.ext@siemens.com>"); diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 17dc5cb6f3f2..a571b47ff362 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -77,6 +77,8 @@ #define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011 #define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 /* deprecated */ #define ASUS_WMI_DEVID_CPU_FAN_CTRL 0x00110013 +#define ASUS_WMI_DEVID_CPU_FAN_CURVE 0x00110024 +#define ASUS_WMI_DEVID_GPU_FAN_CURVE 0x00110025 /* Power */ #define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012 diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h new file mode 100644 index 000000000000..62d2bc774067 --- /dev/null +++ b/include/linux/platform_data/x86/simatic-ipc-base.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Siemens SIMATIC IPC drivers + * + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Henning Schild <henning.schild@siemens.com> + * Gerd Haeussler <gerd.haeussler.ext@siemens.com> + */ + +#ifndef __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H +#define __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H + +#include <linux/types.h> + +#define SIMATIC_IPC_DEVICE_NONE 0 +#define SIMATIC_IPC_DEVICE_227D 1 +#define SIMATIC_IPC_DEVICE_427E 2 +#define SIMATIC_IPC_DEVICE_127E 3 +#define SIMATIC_IPC_DEVICE_227E 4 + +struct simatic_ipc_platform { + u8 devmode; +}; + +u32 simatic_ipc_get_membase0(unsigned int p2sb); + +#endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H */ diff --git a/include/linux/platform_data/x86/simatic-ipc.h b/include/linux/platform_data/x86/simatic-ipc.h new file mode 100644 index 000000000000..f3b76b39776b --- /dev/null +++ b/include/linux/platform_data/x86/simatic-ipc.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Siemens SIMATIC IPC drivers + * + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Henning Schild <henning.schild@siemens.com> + * Gerd Haeussler <gerd.haeussler.ext@siemens.com> + */ + +#ifndef __PLATFORM_DATA_X86_SIMATIC_IPC_H +#define __PLATFORM_DATA_X86_SIMATIC_IPC_H + +#include <linux/dmi.h> +#include <linux/platform_data/x86/simatic-ipc-base.h> + +#define SIMATIC_IPC_DMI_ENTRY_OEM 129 +/* binary type */ +#define SIMATIC_IPC_DMI_TYPE 0xff +#define SIMATIC_IPC_DMI_GROUP 0x05 +#define SIMATIC_IPC_DMI_ENTRY 0x02 +#define SIMATIC_IPC_DMI_TID 0x02 + +enum simatic_ipc_station_ids { + SIMATIC_IPC_INVALID_STATION_ID = 0, + SIMATIC_IPC_IPC227D = 0x00000501, + SIMATIC_IPC_IPC427D = 0x00000701, + SIMATIC_IPC_IPC227E = 0x00000901, + SIMATIC_IPC_IPC277E = 0x00000902, + SIMATIC_IPC_IPC427E = 0x00000A01, + SIMATIC_IPC_IPC477E = 0x00000A02, + SIMATIC_IPC_IPC127E = 0x00000D01, +}; + +static inline u32 simatic_ipc_get_station_id(u8 *data, int max_len) +{ + struct { + u8 type; /* type (0xff = binary) */ + u8 len; /* len of data entry */ + u8 group; + u8 entry; + u8 tid; + __le32 station_id; /* station id (LE) */ + } __packed * data_entry = (void *)data + sizeof(struct dmi_header); + + while ((u8 *)data_entry < data + max_len) { + if (data_entry->type == SIMATIC_IPC_DMI_TYPE && + data_entry->len == sizeof(*data_entry) && + data_entry->group == SIMATIC_IPC_DMI_GROUP && + data_entry->entry == SIMATIC_IPC_DMI_ENTRY && + data_entry->tid == SIMATIC_IPC_DMI_TID) { + return le32_to_cpu(data_entry->station_id); + } + data_entry = (void *)((u8 *)(data_entry) + data_entry->len); + } + + return SIMATIC_IPC_INVALID_STATION_ID; +} + +static inline void +simatic_ipc_find_dmi_entry_helper(const struct dmi_header *dh, void *_data) +{ + u32 *id = _data; + + if (dh->type != SIMATIC_IPC_DMI_ENTRY_OEM) + return; + + *id = simatic_ipc_get_station_id((u8 *)dh, dh->length); +} + +#endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_H */ diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 86b4d5c4dab9..e218041cc000 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -133,6 +133,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD, /* in percents! */ POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD, /* in percents! */ + POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR, POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT, POWER_SUPPLY_PROP_INPUT_POWER_LIMIT, @@ -203,6 +204,12 @@ enum power_supply_usb_type { POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID, /* Apple Charging Method */ }; +enum power_supply_charge_behaviour { + POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO = 0, + POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE, + POWER_SUPPLY_CHARGE_BEHAVIOUR_FORCE_DISCHARGE, +}; + enum power_supply_notifier_events { PSY_EVENT_PROP_CHANGED, }; @@ -709,4 +716,28 @@ static inline void power_supply_remove_hwmon_sysfs(struct power_supply *psy) {} #endif +#ifdef CONFIG_SYSFS +ssize_t power_supply_charge_behaviour_show(struct device *dev, + unsigned int available_behaviours, + enum power_supply_charge_behaviour behaviour, + char *buf); + +int power_supply_charge_behaviour_parse(unsigned int available_behaviours, const char *buf); +#else +static inline +ssize_t power_supply_charge_behaviour_show(struct device *dev, + unsigned int available_behaviours, + enum power_supply_charge_behaviour behaviour, + char *buf) +{ + return -EOPNOTSUPP; +} + +static inline int power_supply_charge_behaviour_parse(unsigned int available_behaviours, + const char *buf) +{ + return -EOPNOTSUPP; +} +#endif + #endif /* __LINUX_POWER_SUPPLY_H__ */ diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h index f636c5310321..cc257097eb05 100644 --- a/include/linux/surface_aggregator/device.h +++ b/include/linux/surface_aggregator/device.h @@ -319,6 +319,15 @@ void ssam_device_driver_unregister(struct ssam_device_driver *d); ssam_device_driver_unregister) +/* -- Helpers for controller and hub devices. ------------------------------- */ + +#ifdef CONFIG_SURFACE_AGGREGATOR_BUS +void ssam_remove_clients(struct device *dev); +#else /* CONFIG_SURFACE_AGGREGATOR_BUS */ +static inline void ssam_remove_clients(struct device *dev) {} +#endif /* CONFIG_SURFACE_AGGREGATOR_BUS */ + + /* -- Helpers for client-device requests. ----------------------------------- */ /** diff --git a/include/linux/wmi.h b/include/linux/wmi.h index 2cb3913c1f50..b88d7b58e61e 100644 --- a/include/linux/wmi.h +++ b/include/linux/wmi.h @@ -35,6 +35,7 @@ extern int set_required_buffer_size(struct wmi_device *wdev, u64 length); struct wmi_driver { struct device_driver driver; const struct wmi_device_id *id_table; + bool no_notify_data; int (*probe)(struct wmi_device *wdev, const void *context); void (*remove)(struct wmi_device *wdev); diff --git a/tools/power/x86/intel-speed-select/isst-config.c b/tools/power/x86/intel-speed-select/isst-config.c index bf9fd3549a1d..efe72fa48224 100644 --- a/tools/power/x86/intel-speed-select/isst-config.c +++ b/tools/power/x86/intel-speed-select/isst-config.c @@ -15,7 +15,7 @@ struct process_cmd_struct { int arg; }; -static const char *version_str = "v1.10"; +static const char *version_str = "v1.11"; static const int supported_api_ver = 1; static struct isst_if_platform_info isst_platform_info; static char *progname; @@ -1599,6 +1599,7 @@ static void set_scaling_min_to_cpuinfo_max(int cpu) die_id != get_physical_die_id(i)) continue; + adjust_scaling_max_from_base_freq(i); set_cpufreq_scaling_min_max_from_cpuinfo(i, 1, 0); adjust_scaling_min_from_base_freq(i); } @@ -1615,6 +1616,7 @@ static void set_scaling_min_to_cpuinfo_min(int cpu) die_id != get_physical_die_id(i)) continue; + adjust_scaling_max_from_base_freq(i); set_cpufreq_scaling_min_max_from_cpuinfo(i, 0, 0); } } |